Windows Support Forum

Wifi has stopped working but still able to connect to internet via ethernet cable

Q: Wifi has stopped working but still able to connect to internet via ethernet cable

Hi there,

The laptop I have is an asus P550C, windows 7.

This laptop came pre-installed with Mcafee Antivirus protection for a limited amount of time. Wifi was working perfectly fine although there were occasions where the connection would disconnect by itself. After the free-trial ended, I did not want to buy the packaged they were advertising so I went to my Control Panel and uninstalled Mcafee. This was when the problem started to occur. The internet access icon had a red x and when I went to diagnose the problem, it said that I needed to connect via an ethernet cable. Since then, I have connected it with an ethernet and internet works and I have also installed AVG's free antivirus software.

I have tried to
type: ipconfig /flushdns
type: nbtstat -R
type: netsh int reset all
type: netsh int ip reset
type: netsh winsock reset

But I still cannot connect via wifi. Please help

Relevancy 100%
Preferred Solution: Wifi has stopped working but still able to connect to internet via ethernet cable

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Wifi has stopped working but still able to connect to internet via ethernet cable

C:\Users\jay>ipconfig/all

Windows IP Configuration

Host Name . . . . . . . . . . . . : jay-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : vlan1.phub.net.cable.rogers.com

Ethernet adapter Bluetooth Network Connection:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Bluetooth Device (Personal Area Network)
Physical Address. . . . . . . . . : 54-35-30-05-36-68
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . : vlan1.phub.net.cable.rogers.com
Description . . . . . . . . . . . : Realtek PCIe GBE Family Controller
Physical Address. . . . . . . . . : BC-EE-7B-28-57-D7
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::9dfa:dcc6:3d3b:ae86%11(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.0.20(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : March-27-15 4:14:52 PM
Lease Expires . . . . . . . . . . : March-28-15 4:14:52 PM
Default Gateway . . . . . . . . . : 192.168.0.1
DHCP Server . . . . . . . . . . . : 192.168.0.1
DHCPv6 IAID . . . . . . . . . . . : 247262843
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-1A-51-D7-D4-BC-EE-7B-28-57-D7

DNS Servers . . . . . . . . . . . : 192.168.0.1
NetBIOS over Tcpip. . . . . . . . : Enabled

Tunnel adapter isatap.vlan1.phub.net.cable.rogers.com:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . : vlan1.phub.net.cable.rogers.com
Description . . . . . . . . . . . : Microsoft ISATAP Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes

Tunnel adapter isatap.{A9DA0935-EE1F-4A59-8A97-DDA13A7DFFEA}:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter #2
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes

Tunnel adapter Teredo Tunneling Pseudo-Interface:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
IPv6 Address. . . . . . . . . . . : 2001:0:9d38:90d7:2c47:1b6c:9c1d:d26b(Pref
erred)
Link-local IPv6 Address . . . . . : fe80::2c47:1b6c:9c1d:d26b%14(Preferred)
Default Gateway . . . . . . . . . : ::
NetBIOS over Tcpip. . . . . . . . : Disabled

C:\Users\jay

http://www.techspot.com/community/topics/wifi-has-stopped-working-but-still-able-to-connect-to-internet-via-ethernet-cable.210787/
Relevancy 24.94%

Something like this but with a thin male connector. I need it to connect flash drives to a usb port where there's little space available around the usb port because the ports around are busy (happens in MacBook air for example).

 

A:I need a usb to usb cable adapter with thin male end

I think you're talking about a USB to Lightening converter
 

http://www.techspot.com/community/topics/i-need-a-usb-to-usb-cable-adapter-with-thin-male-end.217601/
Relevancy 15.05%

I have a HP Pavilion laptop that was able to connect via wifi, or ethernet, just fine until I recently upgraded it to Windows 10. The problem did not start right away, but could be associated with my security software (bitdefender). The laptop does recognize the router, but when I look into the settings I see that there is no connectivity in the IPv4 or IPv6.

Please let me know if additional info is needed to further diagnose this problem.
 

http://www.techspot.com/community/topics/no-internet-connection-on-laptop.217570/
Relevancy 25.8%

Hello, I'll try to be as clear as I can.

I have my computer hooked up to my router with an Ethernet cable. About an hour ago the Limited sign popped up. With the cable connected it says Limited, but I can freely use the internet. When I take the cable out, under connections it still only says "Ethernet Limited" and I can't use the internet. I'm not sure about any specs to my comp. All I know Is I'm using windows 8 and it's from Toshiba. I know it's not much to go on, but I'm losing my mind and any help would be wonderful. Thank you.

This picture is how it looks when the cable is, and isn't, plugged in.

 

A:Limited Access with Ethernet, even when not connected

With the cable pulled out, the picture is correct (for a wired Lan Connection).
When it is attached AND you have access to the Internet, it should not be limited.
SO, get a command prompt ( start->run and enter CMD ) and enter

IPCONFIG /ALL >myTCP.txt
then NOTEPAD myTCP.txt
copy the contents and PASTE that as your follow-up
 

http://www.techspot.com/community/topics/limited-access-with-ethernet-even-when-not-connected.217393/
Relevancy 23.65%

I recently bought a Laptop with an unknown OS (I forget the name, but it wasn't windows) and had to format it, and afterwards got Windows 7 working on it. For some reason, I'm not getting any wifi, help please
 

A:Issues with WIFI on new PC

Also, if it makes a difference, I'm able to connect to the internet with a cord, just not getting wifi
 

http://www.techspot.com/community/topics/issues-with-wifi-on-new-pc.217367/
Relevancy 24.94%

Hey guys I have been trying to set up my tv so I can watch movies online... to say the least it is not going well.. I have been trying for over 2 hours and 2 trips to Best Buy to figure out why i have no sound on my tv.

My headphone jack does work.
There is a picture due to the vga cable.
I have a Y Cable plugged all in but no sound

Please someone help!!
 

A:Laptop to TV no audio with VGA cord and y cable

Hey, I've tried to set this up at one point.. VGA doesn't seem to give sound at least on some T.V's so if you have a sound input you could try:
amazon [dot ] co.uk/s/?ie=UTF8&keywords=vga+with+audio&tag=googhydr-21&index=aps&hvadid=8326471606&ref=pd_sl_2xe1bbnp3q_e

sor maybe you could get something like:
electgadget [dot] co.uk/sg/index.html?s=3219F6825E2CD6CA31C2DE7A93A69CF9&p=51679ce3738a69b94d40325e0e3d57db&m=1324951106152&a=/products&categoryid=28&stockid=460

play [dot] com/Electronics/Electronics/4-/20708900/Trixes-HDMI-Male-To-VGA-Cable-1-8m/Product.html?_%24ja=tsid:11518|cat:20708900|prd:20708900

However I don't with to take the blame if any of these don't work
 

http://www.techspot.com/community/topics/laptop-to-tv-no-audio-with-vga-cord-and-y-cable.175240/
Relevancy 14.62%

I've been having this problem for only the last week or so where my internet will stop working until I restart my computer, even though it says I am connected and internet is available.

The problem is not with my modem or my router. The internet works fine on every other computer.
I've run multiple antivirus scans on multiple programs. Clean.
Drivers are up to date.

Sometimes it disconnects after five minutes, sometimes forty, sometimes hours.
I'm at a loss. Any ideas?
 

A:Internet disconnects and won't reconnect until restart

What is this computers make and model? How does it connect to the Internet?
 

http://www.techspot.com/community/topics/internet-disconnects-and-wont-reconnect-until-restart.200385/
Relevancy 72.24%

Just to start off I am COMPLETELY clueless and have no tech savvy whatsoever so simple language would be appreciated I ve owned this laptop for a little over a year and all this time I ve been able to connect to Wifi without a problem This morning the icon at the bottom left of but Laptop with Ethernet will Wifi, won't cord an to My connect connect the screen told me there was no Internet connection available when I troubleshot it it suggested using the Ethernet cord to connect The Ethernet cord connects them fine and the internet connection becomes available but I m still unable to use the Wifi This is an issue with my laptop because all the other devices My Laptop won't connect to Wifi, but will connect with an Ethernet cord in my house are able to connect to the Wifi and the modem is showing all the appropriate lights and such I ve tried turning it off and on again but alas this once that method has failed I ve also tried resetting the modem and it made no difference Last night I was uninstalling various programs that I didn t need and that s the only thing I ve done differently to my usual computing habits I don t think I removed anything unless I knew what it was but it s possible I accidently removed something important I don t know if that has any relevance or not but it s all I can think of as the reason for this My laptop is a Toshiba Qosmio and the system I use is Windows My modem is Telstra Bigpond Please help D nbsp

A:My Laptop won't connect to Wifi, but will connect with an Ethernet cord

How far from the router are you? I experience the same thing occasionally on my laptop.
I usually have to switch the wifi switch off on the laptop & on then I reboot & I'm back online. My laptop & tower are both about 50' away & on the lower floor where the router is. Good luck.
 

http://www.techspot.com/community/topics/my-laptop-wont-connect-to-wifi-but-will-connect-with-an-ethernet-cord.197531/
Relevancy 20.21%

I have been working on setting up a Minecraft server for a couple of days now and I cannot find a way to get my friends outside of my network to connect connect my to can't My server friends Minecraft I know I gave them the right IP address and I have tried several solutions with no luck I can however connect to the server from other computers connected to the same router but I think that only works when I have it set My friends can't connect to my Minecraft server to quot cracked quot mode I tried disabling my firewall on both my host computer and my router using a different computer as the server host and changing the port All solutions I have tried gave the same message to my friends quot Cannot reach server quot My friends can't connect to my Minecraft server when I was able to connect just fine Here is some possibly useful information Host computer It s not the best -OS Windows XP Professional SP -Processor Intel Pentium GHz uni-core -RAM MB -IP Address Minecraft Server -Version jar Router -Type Wired Wireless -Brand Cisco -Model Linksys E -IP Address -Router Information Firmware Version build Apr Firmware Verification e c b ec c b c ceb Current Time Fri Jan Internet MAC Address FC CB -Internet Connection Connection Type Automatic Configuration - DHCP Internet IP Address Subnet Mask Default Gateway DNS DNS DNS MTU DHCP Lease Time Hour If there is My friends can't connect to my Minecraft server any other information you need please tell me nbsp

A:My friends can't connect to my Minecraft server

You need to forward some ports (router settings) and then open incoming port in your firewall (OS settings). Start here.
 

http://www.techspot.com/community/topics/my-friends-cant-connect-to-my-minecraft-server.175806/
Relevancy 49.45%

Okay so before I begin I'd like to say I am relatively new to computing and I'm not the most knowledgeable.

Let me explain my setup:
I have a HP Envy SleekBook Laptop which is connected to my BT Wifi through a NetGear HomePlug which should give me wired internet.

I cannot move the router which is that the other side of the house and I decided to test me internet speed on speedtest.net I got nearly exactly the same values when using the ethernet cable and when connecting to the internet.

I often have ping spikes and lag in CS:GO.

That is my main issue and my secondary discussion is if this is a good setup : (I have ordered this stuff)

https://www.vibox.co.uk/promotions/defcon1blue
http://www.amazon.co.uk/dp/B00B7ZE0G2/ref=twister_B00L17TXY0?_encoding=UTF8&psc=1
http://www.amazon.co.uk/Corsair-CH-...id=1434810239&sr=1-2&keywords=corsair+k70+rgb

Thanks <3
 

A:Ethernet vs Wifi and Confusion

HMM. and your problem / question is ...
 

http://www.techspot.com/community/topics/ethernet-vs-wifi-and-confusion.216646/
Relevancy 76.54%

When I try and access the internet through any of the main browsers (I.e. Internet Explorer, Google Chrome, Firefox and Safari) they tell me along the lines of 'unable to access the network' and 'this page can't be displayed' after taking a while attempting to load. I also cannot access it through any of my Windows 8 apps. I know it's not an issue with the home broadband itself and is something to do with my laptop as it is running fine both wirelessly and through using an Ethernet cable on all other devices. I would really appreciate some help with trying to fix this asap as I have spent a lot of time researching this issue and trying most things to resolve it without success, I also need to use the internet for loads of coursework over the summer hols and cannot afford to be taking it to a pricey IT technician. Please helppp
 

A:My laptop cannot connect to the internet, even though wireless and ethernet are working

Take a look at the file
\windows\system32\drivers\etc\hosts​there MUST be at least a line reading 127.0.0.1 LOCALHOST
but the question is there anything other than comments in it?
If so, leave the comments and the localhost line and delete everything else.

If you modify the hosts file, then you also need to

ipconfig /flushdns
net stop "dns client"
net start "dns client"

 

http://www.techspot.com/community/topics/my-laptop-cannot-connect-to-the-internet-even-though-wireless-and-ethernet-are-working.195158/
Relevancy 17.2%

SO close Help me get this ball across the goal line I have a old quot Microtek ScanMaker E quot scsi flatbed scanner that originally came with an ISA scsi interface to give you some idea of how old it is I connected it to my PC using a equally ancient Tekram F pci SCSI card c 64bit my got scanner Almost w/Win7 old working that I ve been using with bit WinXP Pro for years The scanner has an - quot x quot scanning bed dpi and bit color reproduction It works great and I see no reason to spend a few hundred dollars to replace it just for Win compatibility so I m trying to get it to work with the bit Almost got my old scanner working w/Win7 64bit version of Windows To complicate things the company that made my SCSI card Tekram went out of business years ago so the bit XP driver was the last they made But after MUCH Googling I found a bit Win compatible driver for another card using the same chipset and low amp behold Windows recognized it It then quot detected quot my scanner for the first time but didn t have a driver Again after much searching I found a Vista bit version of Microtek s quot ScanWizard quot scanner software with bit driver and now bit Windows detects my scanner Yeah But when I try to access the scanner I get an error telling me I quot must install Color Matching System first quot for the scanner to work I don t remember any such software being needed to use the scanner with XP and there is no such program in the ScanWizard software I just installed searching online suggests I will also need to run an quot ICC Color Profiler quot Anyone have any ideas So close yet so far I love doing things I was told were quot impossible quot Help nbsp

A:Almost got my old scanner working w/Win7 64bit

That Microtek ScanMaker E3 scsi flatbed scanner ... didn't even work well with Windows XP... and the cost in time and components to attempt to make it work are much higher than a decent Canon or Epson scanner which can be had fof $40... Less if used...

On what system are you runny SCSI ?
 

http://www.techspot.com/community/topics/almost-got-my-old-scanner-working-w-win7-64bit.157055/
Relevancy 106.64%

I recently used a program Autoruns,, and deleted some startup things I shouldn't have.. Since then I cant connect to internet, the troubleshooter for wireless adapter says the Windows wireless service is not running on this computer (WLAN Autoconfig service) and fails to start the service.
I notice on windows task manager there are only about 13 Processes running and there are usually about 20, and on Services there are about 40 running and about 100 or more stopped services. Thanks for the help

Also on startup now I have a pop up on bottom saying, Failed to connect to a windows service. Windows could not connect to the System Event Notification Service service. This problem prevents standard users from logging on to the system. As an administrative user, you can review the System Event Log for details about why the service didn't respond. And the startup and logon time is really long now
 

A:Windows 7 can't connect to internet through Wifi or ethernet cable

Sounds like you deleted the network drivers, I did this once and ill be honest unless someone here knows a trick, or you have a CD with drivers you are going to have to have a hell of a time unless you know the name of the hardware and download the right driver, thats my guess. best of luck
 

http://www.techspot.com/community/topics/windows-7-cant-connect-to-internet-through-wifi-or-ethernet-cable.200026/
Relevancy 15.05%

Hello friends first time long time And essentially I have a dreaded problem with my quot smart TV quot I have one of the Samsung Led Tv to TV not internet router LED connects but s but an older model like a series or The T V has been working fine for the year and a half I ve had it The software updated itself multiple times and nothing ever happened However last night I had to move furniture around and left my modem and my wireless router disconnected for a good or hrs This action apparently LED TV connects to router but not internet reset my wireless router I reset the network and essentially created a new one I connected an XBOXONE laptops tablet and phones and a wireless printer to the network and they all work fine But for some reason the LED does not want to connect to the internet At first it was the apps that didn t connect and essentially the entire machine could not do anything related to the internet So I went online and tried all kinds of tricks which included doing a factory reset but that didn t work Also I tried to manually plug those google DNS numbers of and and no cigar I tried a few cycles where I unplugged the T V and the router and modem for a few minutes and nothing I called my ISP Time Warner Cable who said the problem was with Samsung I contacted Samsung and got no response I contacted the manufacturer of the wireless router Medialink who told me to change the encryption and the WPS settings I played around with the WPA AND WPA and the WPA AND WPA AND THE AES AND THE TKIP AND BOTH AT THE SAME TIME And absolutely nothing works the crooked thing still wont connect to the internet I have read somewhere that for people with comcast routers they needed to get rid of parental settings but my router doesn t have that I tried to disable WPS and that made it worse So I put everything back the way it was I don t know if the issue has anything to do with static vs Dynamic Ips or what I wonder if anyone can give me another tip I may have skipped over Could it be the internal network adapter is damaged all of a sudden and from pure coincidence independent of the reset Is there a way to set all of these things manually I have attached pictures of the whole process so you can see what I mean I can t figure out how to link so http postimg org gallery c tjth i aa nbsp

A:LED TV connects to router but not internet

That's a great set of pictures to illustrate the issue. As yet I've not bought a smart TV and your post has made me less likely to buy one. In your situation I'd try another factory reset for the TV and then set it up with a cable connection to the router. Assuming that goes well revisit wi-fi concentrating on the router settings.
 

http://www.techspot.com/community/topics/led-tv-connects-to-router-but-not-internet.209188/
Relevancy 49.88%

I have an Aspire one NAV50 with Windows 7 starter.

One time, when I turned it on, The icon for wireless connection doesn't appear anymore. Every time I try troubleshoot it, it would just say that there is an ethernet cable unplugged. And so, I connected it into the ethernet cable and it works fine. But when I tried it again on the wireless connections, it doesn't locate to any wireless connection.

I've tried the ff on my laptop:

restart
update
scan the laptop with MalwareBytes
Fn+f2
by the way, last night, when I turned on again the laptop, the wireless connections can already be found. However, after few minutes, it went back to being unlocated again.
 

A:Laptop would work on ethernet cable not on Wireless Connections

I had doubt the Starter supports the Wireless connecting but since you say " the wireless connections can already be found.", so probably it's possible.
In this case and at the moment the thing I'm thinking about is the driver. Try to update its driver for wireless connecting. (You've said the 'update', but update of what?).
 

http://www.techspot.com/community/topics/laptop-would-work-on-ethernet-cable-not-on-wireless-connections.201158/
Relevancy 64.93%

hi there my wireless through cable work will not My only ethernet internet internet was My internet will only work through ethernet cable not wireless running fine until yesterday when I tried to connect to the internet the message quot windows can t communicate with the device or resource primary dns server quot came up I followed all methods on this website http answers microsoft com en-us w -b d ec fae but none of them worked for me I then returned my laptop to factory settings in the hope it will work but that didnt not work I then realised it works through the ethernet cable but not wireless I ran ipconfig all with my ethernet cable in and this is the result SOMEONE PLEASE HELP ME THANKYOU Windows IP Configuration Host Name Nida-TOSH Primary Dns Suffix Node Type Hybrid IP Routing Enabled No WINS Proxy Enabled No Wireless LAN adapter Wireless Network Connection Connection-specific DNS Suffix Description Realtek RTL CE Wireless LAN n PC I-E NIC Physical Address D -DF- A-EB- -B DHCP Enabled Yes Autoconfiguration Enabled Yes Link-local IPv Address fe d fccc e c eb Preferred IPv Address Preferred Subnet Mask Lease Obtained October Lease Expires October Default Gateway DHCP Server DHCPv IAID DHCPv Client DUID - - - - -EB- A- A-B - -F -D - -E DNS Servers NetBIOS over Tcpip Enabled Ethernet adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description Realtek PCIe FE Family Controller Physical Address B - -F -D - -EF DHCP Enabled Yes Autoconfiguration Enabled Yes Tunnel adapter isatap EEB-B - C-AC - CEB F Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter Local Area Connection Connection-specific DNS Suffix Description Teredo Tunneling Pseudo-Interface Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes IPv Address ef fb affc eb Pre erred Link-local IPv Address fe affc eb Preferred Default Gateway NetBIOS over Tcpip Disabled Tunnel adapter isatap DF D AB- BF- FA - CB -DFA C Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes nbsp

A:My internet will only work through ethernet cable not wireless

There may be an issue on the ISP side or router side since restoring to defaults didnt help. Or it could be an issue with the network adapter. Or it could be an issue with the firewall.

Try downloading running these tools (download via ethernet, run on wireless): Network Fix-It Tool (right click on the internet bars on the task bar in the bottom right hand side of the screen, and click "troubleshoot network...") and Firewall Fix-It Tool.

Did you install anything on your PC before this happened? Did Windows install any updates?

Try disabling your AntiVirus. That may be the issue. I doubt it though.

Tell me if any of these solutions help.
 

http://www.techspot.com/community/topics/my-internet-will-only-work-through-ethernet-cable-not-wireless.197067/
Relevancy 72.24%

Hey guys,

I have a Sony Vaio VPCEH15EN laptop & the OS is Windows 7 home basic. I have a wifi router which is of TPLINK.

The wifi won't connect to my laptop but it works fine on my mobile..it would only start working when I use the ethernet cable. I never had this problem before. I have tried everything ..I also tried the winsockfix.bat but all my efforts have gone in vain..I just don't know if the wifi router is faulty or the modem of my ISP...Please help me solve this problem.

Best Regards,
Om
 

A:Wifi on my laptop won't work but works when I use the ethernet cable

I have solved the problem by myself. To do this, first you have to disconnect your Ethernet cable from your laptop and follow the steps: Start>Control Panel>Network and Sharing Center>Manage Wireless Networks and remove all wireless connections by right click on it and select Remove network from the drop down menu. After doing this, close the windows and scan for the Wi-Fi networks. Click on the available network and select connect. After a while, you will be asked to give a password for your Wi-Fi connection. Type the password and click on connect button. And now will be connected to your Wi-Fi network via wireless.

May be it will help you.
Regards
MD. MAHMUDUL HASAN
 

http://www.techspot.com/community/topics/wifi-on-my-laptop-wont-work-but-works-when-i-use-the-ethernet-cable.200754/
Relevancy 72.24%

Hi! I don't know much about this place but there's a problem with my laptop and I don't know how to solve it. My laptop won't connect to the wifi anymore but it works perfectly fine with the ethernet cable. I appreciate it very much if you tech geniuses could help me out. THANK YOU!
 

A:My WiFi on my laptop won't work but works with Ethernet cable

Are there any yellow (!) in the device manager?
 

http://www.techspot.com/community/topics/my-wifi-on-my-laptop-wont-work-but-works-with-ethernet-cable.206652/
Relevancy 101.48%

Hi guys I ve been researching and trying to days to get this to work with no avail so I decided to post here for some help as doesn't Ethernet connected Wifi work cable. using working when only Internet I see this community is really active We ve got different laptops here and none of them can connect to the wifi anymore it suddenly stopped working for the last whole week We can connect to the internet through ethernet cables though We only use one at a time if ethernet then wireless is disabled and vice versa Here is a copy of the ipconfig all Windows IP Configuration Host Name PeterMai-HP Primary Dns Suffix Node Type Hybrid IP Internet only working when connected using Ethernet cable. Wifi doesn't work Routing Enabled No WINS Proxy Enabled No DNS Suffix Search List moolahd local Ethernet adapter Local Area Connection Connection-specific DNS Suffix moolahd local Description Realtek PCIe GBE Family Controller Physical Address AC- - D- B-ED-F DHCP Enabled Yes Autoconfiguration Enabled Yes Link-local IPv Address fe ac a d b Preferred IPv Address Preferred Subnet Mask Lease Obtained Monday October PM Lease Expires Tuesday October PM Default Gateway DHCP Server DHCPv IAID DHCPv Client DUID - - - - - -FB- -AC- - D- B-ED-F DNS Servers Primary WINS Server NetBIOS over Tcpip Enabled Wireless LAN adapter Wireless Network Connection Connection-specific DNS Suffix Description Broadcom GN b g n x Wi-Fi Ada pter Physical Address -ED-B - D- -FD DHCP Enabled Yes Autoconfiguration Enabled Yes Link-local IPv Address fe c f e e b fc f Preferred Autoconfiguration IPv Address Preferred Subnet Mask Default Gateway DHCPv IAID DHCPv Client DUID - - - - - -FB- -AC- - D- B-ED-F DNS Servers fec ffff fec ffff fec ffff NetBIOS over Tcpip Enabled Tunnel adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description Microsoft to Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter isatap optusnet com au Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter isatap moolahd local Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter Reusable ISATAP Interface CE FC E - F - C C- D - D EBEC Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter isatap DDFAF D- B- -AA A-DBE BA F Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter Reusable ISATAP Interface E ED - - A -BB -FB FA F F Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes And here is a copy of the route print Interface List ac d b ed f Realtek PCIe GBE Family Controller ed b d fd Broadcom GN b g n x Wi-Fi Adapter Software Loopback Interface e Microsoft to Adapter e Microsoft ISATAP Adapter e Microsoft ISATAP Adapter e Microsoft ISATAP Adapter e Microsoft ISATAP Adapter e Microsoft ISATAP Adapter e Microsoft ISATAP Adapter e Microsoft ISATAP Adapter IPv Route Table Active Routes Network Destination Netmask Gateway Interface Metric O... Read more

A:Internet only working when connected using Ethernet cable. Wifi doesn't work

You have an IP on your LAN, but none on your wifi. Check your router to make sure DHCP for wifi is turned on and you have enough available addresses.
 

http://www.techspot.com/community/topics/internet-only-working-when-connected-using-ethernet-cable-wifi-doesnt-work.197081/
Relevancy 20.21%

I'm trying to connect my PC and my Asus Zenfone 2 with Bluetooth. When I use the "add a device" wizard on Windows 8.1, my mobile phone is detected, but when I try to add it I get: "Windows doesn't have a network profile for this device".

Also, when I try to detect my computer with my mobile phone, it´s not detected.

I'm using a Trust USB 2.0 dongle Bluetooth adapter (the little one you insert on the usb port) that came with a keyboard and mouse Bluetooth set that I used. Could that dongle be designed only for the bluetooth keyboard and mouse set?
 

A:I cannot connect my phone to my PC (Windows 8.1) with Bluetooth

The Bluetooth device seems fine as it already detected your keyboard and mouse. However, your phone seems not supported with the current Bluetooth device and you might need to take another look.
 

http://www.techspot.com/community/topics/i-cannot-connect-my-phone-to-my-pc-windows-8-1-with-bluetooth.215646/
Relevancy 20.21%

So about a few weeks ago (not exactly sure when it started) my computer stopped allowing me to access certain websites. It started out with only a few, but now it is almost 50-80% not connecting. I do not think it is a problem with my browser. I typically use Firefox, but IE will connect to the same ones Firefox allows, and will also not connect to the same websites Firefox will not allow.

I have searched these forums for a couple of hours now and nothing seems to fit my exact problem, and I am hesitant to use the solutions from other forums because it might further hurt my system. I am not tech-savvy/computer literate to say the least, and I would need a thorough walk-through on how to diagnose the problem, as well as how to fix it.

Any help would be greatly appreciated.
Thanks
 

A:Unable to connect to most websites -- not a browser problem

How are you not allowed to view the website? Does the page show "The page cannot be displayed"? or you are not authorized or something else?

Try running cmd.exe, type "ipconfig /flushdns" without quotes.
 

http://www.techspot.com/community/topics/unable-to-connect-to-most-websites-not-a-browser-problem.177710/
Relevancy 19.78%

So I have 2 images from the Device manager.
The driver has a Yellow caution sign with "!" inside it.



My issues:
Cannot Connect to wireless, But can connect via Ethernet Cable.

My troubleshooter said the drive couldn't start, and that I needed a Wireless Cable to plugin to the computer.

This is my school computer, my help desk helped before but they are out of office because its summer break.

Device Manager > Components > Problem Devices
Atheros AR5B97 Wireless Network Adapter PCI\VEN_168C&DEV_002E&SUBSYS_E034105B&REV_01\4&124A40C8&0&00E1 This device cannot start.
Also 2 things.
I tried disabling my Bluetooth High Speed, it did nothing.
I do not know if this is the right thread, because this is my first post, if there is anymore information you need to know please contact me.
 

A:Atheros AR5B97 driver not letting me connect to wireless

Hi and welcome to the boards.

How old is this system? Sometimes the wireless card will fail and a new one can be installed.

However, you can upload and install the latest wireless network driver for your system via ethernet cable. Sometimes that is all you need. If it is a built system like a Dell then go to the manufacture's website if this was a system that was built by yourself or someone else then go to the motherboard's website.

Please keep us updated.
 

http://www.techspot.com/community/topics/atheros-ar5b97-driver-not-letting-me-connect-to-wireless.215528/
Relevancy 17.2%

Greetings!

I have an MSI GS70 laptop here , its about 1 month old and the webcam has stopped working,

It has worked earlier, Nothing happens when I try to start it and when I try to find it in the device manager it is not there.

Any idea what I can try?

Thanks!
 

A:MSI GS70 Gaming laptop Webcam not working

Ok I have an MSI GT70, did you try activating it via the toolbar at the top of the screen that comes on MSI laptops. It looks like a tiny paperclip at the top of the screen in the center, there should be once you open that toolbar up an option to activate the webcam.
 

http://www.techspot.com/community/topics/msi-gs70-gaming-laptop-webcam-not-working.197211/
Relevancy 17.2%

Resolved DNS on other on one problem working laptop, DNS network computers problem on one laptop other computers on network working I returned home for the holidays with my laptop running Windows Enterprise -bit When I connect to the wireless network my laptop reports that it is connected with internet access but there is no browsing capability at all P P works Steam works but Chrome Firefox Steam browser give me DNS problem on one laptop, other computers on network working the quot This webpage is not available quot page telling me that the DNS lookup failed All the other computers at home are working happily My settings were to obtain an IP address and DNS server address automatically nslookup said DNS request timed out It didn t work with the wireless or the wired internet with an ethernet cable I set up another network by using my iPhone as a hotspot to make sure it wasn t an issue with all connections and my computer could browse just fine using the iPhone hotspot But it didn t work with my home connection The first thing I tried was to use openDNS s DNS addresses and with my home connection It still failed and nslookup gave the same quot DNS request timed out quot I reset the modem router it s combined unfortunately to factory settings and tried directly connecting with an ethernet cable again It worked for half a second and I opened webpages before it stopped and gave the DNS errors again I tried the wireless internet and it still didn t work I can connect to the modem router I made a guest network just to try it and I got DNS errors again When I reconnected to my primary network it worked for half a second again then stopped My next attempt to fix it was going to the cmd prompt and typing ipconfig release then ipconfig renew I restarted my computer and tried again but I still received the same errors with P P working like before I turned off my firewall and tried but it still didn t work Then I tried ipconfig registerdns restarted my computer and tried again Still didn t work At this point IPv has been disabled but it s still not working I restarted the modem router multiple times but it does nothing to alleviate the problem I have Microsoft Security Essentials did a scan nothing detected Also tried System Restore to two days ago got an error about how it failed Summary Using openDNS address Turned off IPv ipconfig release ipconfig renew ipconfig registerdns no virus trojan system restore failed None of the above worked Other computers at home using the ISP s provided DNS server work My computer works with other connections but not my home network Is there anything else I can try Thanks in advance nbsp

A:DNS problem on one laptop, other computers on network working

Fe3C said:





Summary:
Using openDNS address.
Turned off IPv6
ipconfig /release
ipconfig /renew
ipconfig /registerdns
no virus/trojan
system restore failed

None of the above worked.
Other computers at home using the ISP's provided DNS server work[1].
My computer works with other connections, but not my home network.Click to expand...

Good work. The router is fine[1] so don't fuss with it anymore.

Look for an updated driver for your WiFi adaptor.

On any working system run IPCONFIG /ALL and compare it to the results on the failing system. Look for missing Gateway address or IP address like 169.x.y.z

Some concern re failing system restore, but that's not a networking problem per se.

Work on a wired network first and then move to wifi.
Empty all manual settings on the LAN Connection (get properties, scroll to tcp/ip, click property button - - check ALL tabs; delete everything.

You should be able to PING 8.8.8.8 and then PING google-public-dns-a.google.com.
This shows the LAN adaptor has connectivity and DNS resolution.

Now do the very same sequence with your WiFi connection.
Disconnection from the router and then reconnect.
Inspect IPCONFIG /ALL again to look for valid IP addr, gateway addr and valid DNS settings. (not the OpenDNS you had before).

ping 8.8.8.8 ; if this doesn't work, then the WiFi settings are invalid even before DNS is an issue.
 

http://www.techspot.com/community/topics/dns-problem-on-one-laptop-other-computers-on-network-working.174565/
Relevancy 23.22%

How can I get my pendrive to it's previous state just by formatting or anything else.

Do I need to update my drivers after os installation for getting wifi worked ?
 

A:Pendrive and wifi problem

armahee said:





How can I get my pendrive to it's previous state just by formatting or anything else.Click to expand...

Not sure I follow you. When you format the USB drive it will be blanked.



armahee said:





Do I need to update my drivers after os installation for getting wifi worked ?Click to expand...

You will need to install the drivers for your Netbook after so the wifi will work, yes.
 

http://www.techspot.com/community/topics/pendrive-and-wifi-problem.213757/
Relevancy 43.43%

So this is my first time making a forum post since 169.xx ip address working, Ethernet not I am not desperate because nothing I ve tried has worked So two weeks ago I had an electrical surge in my house on my desktop the ethernet port on the motherboard died so I sent Ethernet not working, 169.xx ip address back my motherboard to have that fixed Now that I have it back I tried getting my ethernet to work though now the Ethernet not working, 169.xx ip address connection properly works as in Ethernet not working, 169.xx ip address the local area connection is now at least recognized I still have no internet access I just tried reinstalling Windows bit fresh install after I wiped everything My ethernet adapter is called Realtek PCIe GBI Family controller I have a E Linksys router and a Comcast modem I tried plugging the ethernet cable into each other but no luck Currently I m attempting to at least make the desktop use the modem internet directly I seem to be sending packets but not receiving them when I looked in the Status of the Local Area Connection in network connection details I have an autoconfiguration ipv of xxx xxx ipv subnet mask and nothing in the ipv default gateway dns server or wins server and no ipv default gateway I ve tried many things too many to name now but I am willing to try anything you guys mention and post the appropriate data or logs just tell me what it is you would like to see Any help would be highly appreciated nbsp

A:Ethernet not working, 169.xx ip address

Anytime you see 169.x.y.z, that's the clue that your DHCP request to the router did not get an answer.

DHCP should return an IP address directly related to your router's address and two DNS addresses.

search the form for DHCP - - I've posted a solution here on TS.
 

http://www.techspot.com/community/topics/ethernet-not-working-169-xx-ip-address.203386/
Relevancy 17.2%

HP G62-b80SS laptop
Many keys in the keyboard aren't working. I've successfully replaced the motherboard for this laptop because it went dead because of some dampness trickling going inside and is now otherwise working fine. It's been abandoned for 7 months. I've reseated the keyboard connector and cleaned it with a contact cleaner.
I guess I need to get a new keyboard, am I right?
Thanks!
 

A:Many keys in keyboard not working HP G62-b80SS laptop

Or the motherboard keyboard connector is damages by corrosion...
 

http://www.techspot.com/community/topics/many-keys-in-keyboard-not-working-hp-g62-b80ss-laptop.213407/
Relevancy 16.34%

AMD graphics card owners that have tried playing The Witcher 3: Wild Hunt or Project Cars are likely already aware of the fact that both titles run like crap on Radeon hardware. There's a ton of controversy surrounding what did...

Read more
 

A:AMD is working on Catalyst beta drivers for 'The Witcher 3: Wild Hunt' and 'Project Cars'

"AMD graphics card owners that have tried playing The Witcher 3: Wild Hunt or Project Cars are likely already aware of the fact that both titles run like crap on Radeon hardware."

At the risk of pointing out the obvious, "runs like crap" doesn't strike me as professional an expression as "runs terribly" or "are both exceptionally poor performers on..." It may convey the sentiments of the accompanying article comments, but those are supposed to be crude.
 

http://www.techspot.com/community/topics/amd-is-working-on-catalyst-beta-drivers-for-the-witcher-3-wild-hunt-and-project-cars.213323/
Relevancy 24.51%

I get a bit jittery when I'm unplugging cable connectors (these images are just examples, I'm thinking of all types of connectors). What's the best way to safely unplug them?, pull from the cables or from the plastic case. What's your experience?. This pics are just a few examples of connectors. I'm posting this thread about any type of connectors. Thank you.


 

A:What's the best way to unplug laptop cable internal connectors on motherboard etc?

Many simply pull apart. Watch out for the ones with locking tabs though. I don't think you have anything to worry about as long as you take your time.
 

http://www.techspot.com/community/topics/whats-the-best-way-to-unplug-laptop-cable-internal-connectors-on-motherboard-etc.212863/
Relevancy 17.63%

My hard drive died and I took it to a computer shop where he put in a new one and windows XP, as no one had a vista disc. Since I got it back the blue Fn key doesn't work. Numbers lock works, but all the F keys, volume controls, brightness controls and my crt/lcd don't work at all. Dell doesn't seem to have a driver that I can find. Does anyone have one that would fix this? Is there another way to use the F keys, especially the crt/lcd without having to use the Fn key?
 

A:Fn key not working on Inspiron 1501 with XP

Be sure you are the registered owner, then call Dell Tech support, and ask them to send you the install disk set... It is usually free for the original owner, if not supplied at time of purchase.
 

http://www.techspot.com/community/topics/fn-key-not-working-on-inspiron-1501-with-xp.156952/
Relevancy 23.22%

I recently moved to a new home and I set up my pc and the wireless adapter can't even see the wifi despite picking up my neighbours which have very weak signals.
My phone and my laptop both see it and connect with full strength.

What do I do?
 

A:Netgear N300 can't see wifi

Try the factory reset. There's a a small reset button in the back, press it down (sometimes you have to use a pen if it's one of those pin hole things) for about 5 seconds and that takes it back to factory settings. At that point you can either run the install CD that came with the router, or set it up manually from your browser.
 

http://www.techspot.com/community/topics/netgear-n300-cant-see-wifi.212510/
Relevancy 17.2%

Hi
I have an asus x555ld-x0549h, it has a built in camera that does not work. I have been searching for a driver all day and didnt find a thing...
then I tought that the camera was being blocked and I enabled it and... still noting...
can anyone help me please?
I'm using windows 8 and the camera app says that I need to plug in a camera... so.... wtf?! :S
 

A:Asus x555ld built in camera not working

How old is this laptop?
 

http://www.techspot.com/community/topics/asus-x555ld-built-in-camera-not-working.212530/
Relevancy 41.28%

I have no clue if I'm posting this in the correct place but here it goes my Sell insperion laptop worked just fine as of a couple of days ago. We ended up connecting it to the Ethernet cord and it works. We've tried restarting it numerous times and it doesn't recognize any networks. Any suggestions?
 

A:Wi-Fi stopped working now only works wired

Have you checked under your Device Manager to see if the WiFi was disabled for some reason? Does your Dell have a physical WiFi button, and is it turned on? You could also go to the Dell website and download the WiFi device drivers for your specific laptop. Un-install the WiFi drivers, reboot and then re-install them.
 

http://www.techspot.com/community/topics/wi-fi-stopped-working-now-only-works-wired.212471/
Relevancy 35.69%

My windows 7 laptop can connect to the internet, but unable to browse.

I can ping www.yahoo.com with zero loss
when I type ipconfig I am seeing my IP address

I have 4 other computers connected to the internet at home here no issues, it is just this one computer.

I have tried multiple browsers. I have tried both wired and wireless I even copied a chrome installer exe from a usb drive to the computer and ran it. When I double clicked the exe it WAS able to download the chrome software and install it, so I am definitely connected to the internet. But if I try and open a website, chrome says ERR_NETWORK_ACCESS_DENIED.

I.E. and firefox as well, no connection.

Thank you for your help in advance!
 

A:Can connect but can't browse internet

Update, I am able to browse in safe mode with network... but unable to in normal mode.
 

http://www.techspot.com/community/topics/can-connect-but-cant-browse-internet.212468/
Relevancy 86%

Alright I ll make it short but informative I can t connect cable able internet Only via to ethernet to connect to the internet without an ethernet cable I have tried pressing the laptop s quot WiFi quot button but nothing has happened The light didn t even change I have tried Only able to connect to internet via ethernet cable rebooting and going into BIOS to see Only able to connect to internet via ethernet cable if there was on option there nothing I Only able to connect to internet via ethernet cable have tried going into Device Manager and under quot Network Cards quot I got options I believe I had options though now I have only first I tried to deactivate it and the reactivate it but that just made it not work at all and when I got home and got my connection back I tried to update the drivers which is when I noticed I only had because I was at school when all showed up so I didn t have connection to update them but it just said that they were all up to date I have tried using the windows recovering tool to go back before the problem occurred Though I did get an error the first time due to my AVG being up so it couldn t complete but after that I tried doing it again with AVG off but the situation didn t change and I know the problem isn t with the router as the problem occurs with different WiFi s In the beginning it would only say quot can t connect to the internet quot over and over again but now it won t even show the available WiFi networks in the area Any help is much appreciated nbsp

A:Only able to connect to internet via ethernet cable

Any suggestions at all? if you require more information in order to come up with a solution, just tell me what you need an ill try my best to figure it out
 

http://www.techspot.com/community/topics/only-able-to-connect-to-internet-via-ethernet-cable.212310/
Relevancy 66.65%

My computer is able to connect to the internet through an ethernet cable, but no devices besides my tv is able to wirelessly connect at all. The internet doesn't even show in the Choose A Network tab on my Ipad.
 

A:WiFi isn't working but ethernet is

What is the make and model of the router or modem you are using? What type of internet connection do you have (DSL / Cable / Satellite / etc). What have you done so far to try to correct this problem (reboot equipment, change settings, unplug then re-plug equipment, etc.)? Need to provide more information before anyone can really try to help.
 

http://www.techspot.com/community/topics/wifi-isnt-working-but-ethernet-is.212323/
Relevancy 14.19%

So basically how the title is.

My internet would drop out/freeze. Router doesn't indicate any change in service. I plug my laptop into the modem, and have prime speeds.

Restart the router. Works for awhile.
Reinstalled the firmware manually on the router.
Set the Channel off of "Auto" and put on various options of 9, 10, 11 to avoid clashes with other networks.

Freezes. Now the router indicates there's no connection. Drag the cord out of modem and test. Prime speeds.

Okay, screw this - I went and bought a new router yesterday because, sure, that Belkin one was 2-3 years old. Set it up with same channel settings, etc.
Same.
Freaking.
Thing.

I have a laptop that runs a VPN (for work) that uses it, plus multiple iphones (3) and ipads (2) an AppleTV and a Samsung smart TV.

Like, help me please here.
 

A:Internet Drops Out, Consistent Speed with Modem, New Router - no solution

OK, but lets solve on thing at a time 1) ignore the VPN at work and let's get the home router stabilized.
The mobile devices are difficult to diagnose, so 2) stick with the PC for now.

Standard questions:

did you update the ethernet & wifi drivers on the PC?
have you looked to ensure your new router has the latest firmware?
*if* you have a DSL connection to the ISP, do you have the line filters on EVERY device connected to the phone line EXCEPT the line to the modem? *MUST HAVE*
Got to get these right first.

THEN, find the MTU that's right for you AT HOME and set that into the new router:

get a command prompt
ping -l 1500 -f 8.8.8.8
as long as you see Packet needs to be fragmented but DF set., reduce the 1500 by 8 and iterate with the new number
:: record the MTU that works for your ISP at home
The router conf page is accessible using your browser and HTTP://your_router_address/
You need the router password
set the new MTU. Also set a new router password and save the settngs.

The wired connection should be solid at this point.

The wifi should also be better, as long as you avoid other stations with the same channel.
I assume you've see the post re inSSIDER for wifi setup.
 

http://www.techspot.com/community/topics/internet-drops-out-consistent-speed-with-modem-new-router-no-solution.212305/
Relevancy 19.78%

Hello I need to connect power/reset buttons to dell optiplex 620, but I just can't connect them anywhere on motherboard.

I need help as fast as possible

Thank you
 

http://www.techspot.com/community/topics/dell-optiplex-620-connect-power-reset-buttons.212270/
Relevancy 21.5%

I have a desktop computer that is running on Windows Xp, up until this morning, everything was fine, I could connect to the internet with no problem.

I turned on my computer, and it is telling me that the network cable is unplugged, as well as my network is not showing when i go to "my network connections"

But yet.....

I AM connected to my router, and there is no problem with the cord (I tried it on different computers as well as my Xbox 360 on the same port....so I know its not the router)....when I go into device manager, everything seems to be working correctly, and my network adapter and ethernet card both are marked as working properly.

Any ideas how I can fix this issue ?
 

A:"Network cable is unplugged" but its really not..

sadgyrl514 said:





I have a desktop computer that is running on Windows Xp, up until this morning, everything was fine, I could connect to the internet with no problem.

I turned on my computer, and it is telling me that the network cable is unplugged, as well as my network is not showing when i go to "my network connections"

But yet.....

I AM connected to my router, and there is no problem with the cord (I tried it on different computers as well as my Xbox 360 on the same port....so I know its not the router)....when I go into device manager, everything seems to be working correctly, and my network adapter and ethernet card both are marked as working properly.

Any ideas how I can fix this issue ?Click to expand...

Try rebooting,
 

http://www.techspot.com/community/topics/network-cable-is-unplugged-but-its-really-not.166539/
Relevancy 21.93%

I have a Gateway NE56R and ever since I updated to windows 8.1 I cannot use the internet at home even though it says it is connected to WiFi, but it works at other places. Please help asap
 

http://www.techspot.com/community/topics/gateway-ne56r-wifi-doesnt-work-at-home-after-windows-8-1-update.212135/
Relevancy 14.62%

Hello So a description of the issue I ve had this about times now spread out over a couple of months The internet will just completely randomly without apparent trigger stop working completely When I check the router will still have an IP and the quot Internet quot light will still be flashing green indicating active internet connection on the front panel So far this has happened at completely random times - While playing a game LoL the internet just cut out and didn t come back for hours - I came back from a shower and the internet wasn t working anymore similar to other times - I was working on a school document not using any internet at the time Skype was running maybe Steam and it just cut out Et cetera The reason I don t think it s a disruption from the side of my ISP is that sometimes clicking quot Renew Lease quot in the router page seemed to fix it though sometimes it wouldn t work until I d refreshed it multiple times Also the internet light doesn t internet but connected, periodically cuts Router stays out go out on the router and Router stays connected, but internet cuts out periodically usually there isn t even any problem indicated in windows except from the internet just not working I e no yellow exclamation mark in the little internet icon Further information The router is a by this time quite old Netgear Wireless GR v and I have upgraded the firmware to the latest version Also my phone AND tablet will remain connected to the wireless network but without any usable internet connection I have double checked all the cables and connections everything seems to be in working order I live in an apartment building and we all share a big internet connection I have a cable coming in from a central modem so I don t have a specific connection that I can contact an ISP about which also means I have no modem to configure or help me Any advice would be greatly appreciated especially regarding whether or not it could be my router at fault and if a new one could fix it Thanks in advance nbsp

A:Router stays connected, but internet cuts out periodically

This isn't my area of expertise by a long shot but I have had these issues as well with my cable set-up. Sometimes I needed simply to restart my router. I have found at other times I would have to reset the box the cable company installed in our cellar by powering it off for 10 seconds and then on again. Once in awhile I will have to do this to my modem.

Our biggest issue was the splitter. It went bad and since it was outside the house and Comcast's equipment they replaced it for free which restored everything to working order.

I would say though that it is probably time to replace the router. I had a good Linksys G for years but then it would constantly drop connections. I replaced it with my current Netgear and it has served my entire household well.

Good luck and let us know how it turns out.
 

http://www.techspot.com/community/topics/router-stays-connected-but-internet-cuts-out-periodically.204922/
Relevancy 26.23%

I've got excess ethernet wire, despte how ridicules it may sound, can I use the ethernet wire to make an extension for my headphones?
 

A:Headphones using ethernet wire

It would be a similar process to this:

though I don't know how good a job it will do.
Here's more reading about this topic - http://www.head-fi.org/t/537117/the-y-split-thread
 

http://www.techspot.com/community/topics/headphones-using-ethernet-wire.210084/
Relevancy 24.08%

I and Driver responding stopped recovered has purchased an HP-f wm with an Intel N processor about a month ago It s running Windows I also bought a mouse for it since it s not a touch screen that allows me to scroll side to side and makes not having the touch screen easier to Driver stopped responding and has recovered operate The what I thought was Driver stopped responding and has recovered mouse started freezing in the middle of using it to surf the net or working in documents it Driver stopped responding and has recovered just freezes for a bit then starts working again Last night I got an error message after it did this saying the driver had stopped working and recovered I didn t notice that it said which driver I found a fix for this on the Microsoft website but it was for Windows I have tried to do all the updates that it needed when I first got it but I have to do them a few at a time as they fail if I try to do them all at once I have gone through and done several of these one at a time Recent updates have successfully installed it s just the ones needed when I first started using it that are a problem I have about left from Sept-Dec Any advice would be appreciated I got this from Amazon so I have no support nor can I return it nbsp

A:Driver stopped responding and has recovered

Two suggestions:

Try installing the software under "Windows 7" preferances. When you go to install the software (I do not have windows 8.1 myself, just going off Windows 7 features) Right click the installer and go to properties. Under "Compatibility" select "Compatibility Mode" as "Run this program in compatibility mode for" and select Windows 7.

Also select the "Priviledge Level" to make sure there is a checkmark in "Run this program as an administrator"
The other option is to find any driver software that is installed with the mouse and ensure that it is changed to these settings as well. If you want me to go into depth about how to do that I can explain further. But the general idea is to find the .EXE for the software that starts with windows and change the properties to the same as you did with the installer.
 

http://www.techspot.com/community/topics/driver-stopped-responding-and-has-recovered.208879/
Relevancy 23.65%

hello techspot, I keep getting this error when I play games in my computre. what should I do to fix this error?
 

A:Display driver stopped responding and has recovered

I get this error every once and a while. Updating your GPU drivers usually solves the issue. Do you know what GPU you are running? Post your full system specs below and then we can go from there.
 

http://www.techspot.com/community/topics/display-driver-stopped-responding-and-has-recovered.204745/
Relevancy 17.63%

I have same problem Recently ISP have changed my ADSL working stops Wi-Fi router to vDSL modem WiFirouter I m using assembled service of internet IPTV and VoIP My LAN works perfectly but WiFi Wi-Fi stops working is giving me some hard time everything works nice and I m using internet on my laptop Lenovo t Win phone LG G andorid tablet iPad but day after all devices are showing that they are connected to WIFI but there is no or low internet response for example skype works but cant open some pages other are opening but some images don t load fb etc I can t log in into router to reboot it And this issue when internet isn t working normally but showing as connected persists on all devices I ve mentioned above But at the same time when internet isn t working when I try it on my desktop PC Win everything works normally Then I need to go to router turn it off then on and everything works perfectly sometimes for a day sometimes for a couple of days I ve tried everything changing IP lease time changing freq form to changing channels switching from b g n to N almost everything I could think of My WiFi is secured with WPA PWA -PSK-TKIP AES password and name is a simple one with char name My modem router information s are Device Type ZXHN H N Device Serial No ZTEEG E Batch No T HW Version V SW Version V L BOSNIA BOOT Version V do anyone have an idea what it can be the reason why this is happening nbsp

A:Wi-Fi stops working

NetWalker85. Since your desktop works when your wireless devices don't, it's not your Internet signal from your ISP. Your devices are showing the router's SSID which is being broadcast, but not the wireless internet signal from the router. I would reset the modem/router to it's default settings and change the necessary items (SSID and passwords,security settings, max number of IP addresses for the router to assign to devices,etc). if that was never done. If the problem is still there, I would request a new combo unit, or possibly see if there is a firmware update for that combo unit.
 

http://www.techspot.com/community/topics/wi-fi-stops-working.210644/
Relevancy 14.19%

Dear Experts

My Windows 7 laptop connected to internet via my mobile Samsung Galaxy S3 by tethering portable Wi-Fi hotspot.

I am a technician field and I need to connect my laptop via USB port to an Ericsson MiniLink (telecom NE) node to do configuration.

https://mazrilhisham.wordpress.com/2004/01/01/traffic-node/#jp-carousel-241

Whenever I connect the USB cable from the laptop to Ericsson my internet gets dropped, while this didn?t happen to my coworker who is using the same laptop brand as mine.
By the way the Ericsson software that I installed on my laptop create the attached socket called : "Ericsson USBLAN adapter" on my computer's network and that would be used for the USB communication

http://imgur.com/IRNyoIv



Any advice what should I do to avoid this problem
Thanks
 

http://www.techspot.com/community/topics/laptop%E2%80%99s-internet-via-tethering-gets-dropped-when-connects-to-ericsson-minilink.210600/
Relevancy 42.57%

A while ago, after accidentally opening the Store app, Windows forced me to restart to install Windows 8.1, which I was unable to weeks before because of driver issues. I didn't need Windows 8.1 yet, so I didn't download it before then.

However, during the installation, it failed (again) due to either my antivirus or the aforementioned driver issues. Upon logging back in, my computer was unable to find any WiFi networks. Seeing as I live in the middle of a densely populated city, this isn't possible. Plugging in an ethernet cord still works, so no issues with that adapter or my home internet. I checked all the drivers for my WiFi adapter, and my Ethernet adapter, and both are up to date and display as working properly. Restarting several times didn't seem to fix this issue, and using system restore didn't seem to work either. I used the Troubleshooting tool, and that didn't give my any helpful advice or answers, so I got nothing.

What can I do to fix this issue?

For reference, I have a Broadcom 802.11ac Network Adapter, Driver Version 6.30.95.14, and a Qualcomm Atheros AR8151 PCI-E Gigabit Ethernet Controller, Driver Version 2.1.0.7.
 

A:Unable to connect to WiFi after failed Windows 8.1 update

Never mind, it seems to have resolved itself overnight after I put it to sleep for several hours.
 

http://www.techspot.com/community/topics/unable-to-connect-to-wifi-after-failed-windows-8-1-update.210268/
Relevancy 17.63%

Gateway NE56R41u laptop freezes after 5-10 minutes of running, ran many many tests and scans to try to find malware but nothing was found, it works fine in safe mode but not in safe mode with networking, please help
 

A:Gateway Laptop isn't working

When something works in Safe Mode but not while in Normal it points to a driver issue. Have you tried updating your WiFi/Network Interface Card (NIC) drivers for your system from Gateway's website?

Do you use a cooling pad? Laptops can get hot quickly and high temps will freeze/shut-down a system fast.
 

http://www.techspot.com/community/topics/gateway-laptop-isnt-working.209213/
Relevancy 20.21%

Whenever I connect my external hard disk to my laptop, my computer freezes as soon as I My Computer to access it or click on 'Open to view files' in the autorun menu. I cannot do once this happens. Not even task manager can be opened. The computer unfreezes and starts working fine after I unplug my hard disk. But it works just fine on my friend's laptop.
This started happening a few days ago. Till then I could use the hard disk normally without any problems. Can anyone please help me out with this problem?
My operating system is windows 7 and I am using Avast Internet Security 7 antivirus
 

A:My laptop freezes when I connect an external HDD

What type of external HDD is it? Of what Brand?
 

http://www.techspot.com/community/topics/my-laptop-freezes-when-i-connect-an-external-hdd.180809/
Relevancy 24.94%

I need the best and most compatible router for TWC?
I need the router to reach a very good distance (between 3 houses really close to each other). Or would it be better to get a booster?
 

A:Wi-fi router for Time Warner Cable

To share from house-to-house, you need a strong RF signal so look for MIMO Class routers with multiple antennas, three if you can find one. If the lot layout is like a triangle between the houses, one good router should work, otherwise when lined-up like a fence, you will need a repeater.
 

http://www.techspot.com/community/topics/wi-fi-router-for-time-warner-cable.209487/
Relevancy 17.63%

Hi when I applied some new Thermal paste to my rig I noticed that my case fan stop spinning after the POST test on bootup.
my build is.
G33MO3 Motherboard
E8500 CPU
EVGA gtx 650 GPU
250 Seagate HDD
Simple samsung Optical drive
430w corsair PSU
2x1Gb DDR2 RAM
I am running the latest version of BIOS for my motherboard (dell revision 1.0.15).
This is unfortunate as I was just about to overclock my system and now the only fan on my case has gone.
I know the fan works because during POST it spins up.
I've tried clearing the BIOS to default with CMOS but that did nothing but slow my computer down.
Thank you.
 

A:Fan not working and PC instantly slowed down?

Hmm, don't try clearing the BIOS, try looking through it, the fan might be disabled for some reason in there. Also, do you have any other places you could plug that fan into ( on the motherboard, or you could just use two wires to connect it to the PSU directly ? Also, make sure any fan-control or overclock software doesn't interfere.
 

http://www.techspot.com/community/topics/fan-not-working-and-pc-instantly-slowed-down.207984/
Relevancy 17.63%

It was like any other day while I was working on the computer while my PC suddenly shut down I tried turning it back PC working not GPU using on but nothing So I opened up the case and noticed that when I press the power button not even PC not working using GPU the motherboard fan starts spinning I stripped down everything from the system and tried running it It worked flawlessly So after putting everything back on one by one the culprit turned out to be the Graphics card The computer would turn on with the card inserted into the PCI slot Whenever I would place it in there not even connected with the VGA cable just plugged in the slot the motherboard would refuse to start up So I decided to check the GPU for cylinder holes but everything seemed to be intact no burnt smell or anything The PC works just fine with the integrated graphics Can it really just die like that without a proper reason It wasn t over-heating I had that one checked So what should I do right now I don t have a spare GPU to check if it s the PCI slot that s the problem or the GPU which was fine like minutes ago nbsp

A:PC not working using GPU

Hmm, what graphics card are you using ? It might be that your power supply lost it's wattage over time, and that it's now not strong enough to power it. How much W does your PSU give ?
 

http://www.techspot.com/community/topics/pc-not-working-using-gpu.209267/
Relevancy 14.62%

I dont know how long its been going on but within a internet provider switch from AT&T to TWC its still been doing this. Every time I reset the router name or password it lets me reconnect to the internet, but when I shut it down and boot it up later or after a couple hours it refuses to connect until I switch the router name or security password.

Its a toshiba running windows 7
The adapter is realtek or something like that which im pretty sure is the cause but nothing seems to fix this issue.
Thanks for any info on this.
 

A:Laptop Stops connecting to internet randomly

What is the Model number of the Toshiba laptop?
Does your laptop come with an Ethernet port (most do have one)? If so, try connecting directly to your router with an Ethernet Cable and see if the problem continues.
I highly doubt that its a problem with the Router (but it could be). I believe that you may have a problem with the wireless drivers installed. I would suggest:
1. Download the wireless drivers from the Toshiba website
2. Properly Uninstall the wireless drivers
3. Install wireless drivers from the download (step 1).
4. Wait and see if problem still persists. If so, let us know.
 

http://www.techspot.com/community/topics/laptop-stops-connecting-to-internet-randomly.209164/
Relevancy 25.8%

Would it work to plug it in from the pc to tv to watch ?
 

A:Appropriate cable?

Does the TV and PC both support VGA connection? If so then yes, but only if you don't have a digital connection to choose otherwise. If you have a DVI, HDMI, or Display Port to use instead, those would be preferable over analog signaling.
 

http://www.techspot.com/community/topics/appropriate-cable.209089/
Relevancy 17.2%

I have a HP HPE- f i quad core with a TB WD primary and a TB WD secondary that I ve had for about - years and have cloned the primary several times with no problems About - weeks ago I cloned the primary once again with another TB WD only to find that after the cloning the DVD drive stopped writing It actually begins the process but after writing the lead-in it simply sits there and spins heating the disk and of course making it unusable Once this occurs working DVD burner stoped after cloning it usually cannot be stopped by any means and the machine has to be hard rebooted to proceed Since the first cloning operation I have re-cloned the original using three different cloning programs all with the same result as well as cloning to a new TB WD drive with the same results I ve also replaced the DVD drive with two different known good drives one being brand new went through all of the HP troubleshooting procedures uninstalled DVD burner stoped working after cloning the drivers and re-installed them deleted the high and low files from the registry etc with no success The strange thing is that if I use the original hard drive along with the cloned drive I can boot off the original and burn to the same DVD drive with no problem I can also write CD s with both the original and the clone both audio disks and data disks I ve also ran the DVD drive off from one of the other SATA ports on the mother board along with replacing the cable I even took the computer into a computer shop and they worked on it for over days and could not identify the problem To make a long story short this problem is just about ready to get the best of me I ve ordered an external DVD drive believing this will work but I would really like to determine why it is doing what it is doing The cloning should not have caused it but seems to be the only thing that is common to the problem I would really appreciate any incite that you may have nbsp

A:DVD burner stoped working after cloning

The only suggestion I can think of is some type of burning software is broken with the Cloned OS. If you have any software installed that handles the burning (include Roxio, Creative and all others) Remove them and the Registry files related.

I suggest using Revo Uninstaller as it will automatically search out and tell you whats left over, and let you delete them or save them. I suggest deleting all files/folders and registry items left to ensure they are not somehow causing the issue.
 

http://www.techspot.com/community/topics/dvd-burner-stoped-working-after-cloning.208883/
Relevancy 43.86%

I have been having a problem on several devices conecting to my WiFi router saying there is a problem with Authentication. I have just relised that if I disconect the ethernet cable from my desktop computer to the router the WiFi works without porblems and as soon as I reconnect it I cant connect to the WiFi anymore. I using windows 8.1.

Any suggestions?
 

A:Can't connect to WiFi when LAN connected.

What is the make and model of your WiFi router? It sounds like a setting is enabled within the router that is giving precedent to your Ethernet connection over your wifi connections.
 

http://www.techspot.com/community/topics/cant-connect-to-wifi-when-lan-connected.208892/
Relevancy 39.99%

Hey,

Yesterday, I was working with my PC while my 1TB Seagate external hard (http://www.amazon.com/Seagate-FreeAgent-Ultra-Portable-External-STAA1000101/dp/B0045JLPMO) was plugged in via USB. The USB connection was a little bit loose.

Then when I was plugging a USB flash memory in, I noticed that the external hard was disconnected.
I connected it again, but it didn't appear in My Computer.
Here is the state in Disk Management and Device Manager:




After that, I plugged out the "SATA to USB converter" from the hard and connected it directly to SATA cable inside the PC case (like internal HDD), but this time nothing showed up in Disk Management, Device Manager and BIOS. However, it took a long time for the system to boot.


I searched and read lots of threads and tested some other stuff:





(It didn't appear in Minitool Partion Wizad).

I've got a lot of data on this HDD which really matters to me.
Any help is really appreciated.
 

A:FreeAgent 1TB External Hard stopped working (unknown, not initialized)

Hi there Sedhadi,

If your HDD is failing the manufacturer's tests it is probably dead. IF you need to get your data back look for a reputable data recovery company in the area.
Hope that helps.
 

http://www.techspot.com/community/topics/freeagent-1tb-external-hard-stopped-working-unknown-not-initialized.208828/
Relevancy 61.06%

My PC with windows 7 is the only computer with issues in the house. Ethernet works perfectly but wifi doesn't even when I don't have the ethernet hooked up. The wifi says it is connected but browsers, steam, and Itunes don't work. I have Bitdefender A/V and already tried uninstalling it, no change. I also uninstalled steam and Itunes with still no change. I even uninstalled and reinstalled the drivers for the wireless adapter. I tried looking and I don't recall downloading or installing anything around the time the problem started. Before I try replacing the adapter itself, I was hoping for help here since I saw a very similar problem in another thread.
 

A:Internet connects but doesnt work on wifi, ethernet works fine

Bump
If there is any more info I can give to help you help me, please let me know.
 

http://www.techspot.com/community/topics/internet-connects-but-doesnt-work-on-wifi-ethernet-works-fine.199827/
Relevancy 33.97%

I am looking to replace my tired Linksys WRT54G router that is about 10 years old. I love the router, and its even better with DD-WRT on it, but I'm starting to have troubles with the wifi dropping all the connects for a couple seconds when running all my wireless devices. I have 3 smart phones, 2 tablets, 1 Chromecast, a smart TV, and Roku + a laptop or 3 in my house right now, and it seems like its getting to be a bit much for it.
I have had to completely re-flash the firmware twice this year to get the wifi working again, so I'm thinking its time for replacement.
I have been thinking about just getting the new WRT54GL for $50, but I'm also thinking it might be a good idea to upgrade the wifi technology past wireless G .
I'm wondering if my Tablet (Nexu 9), and our smartphones (Razr HD Max) along with the Chromecast will take advantage of the new wireless standards and higher speeds or not? If they will can someone recomend a decent wireless router that takes DD-WRT nicely in the sub-$100 range? Thanks!
 

A:Looking for new Wifi Router - Will Tablet/Smartphone take advantage of new wifi Standards?

I been programming in Android/Linux since 2010 and there is code that supports VHT is Very High Throughput. Right now the standards are HT is High Throughput .

As for DD-WRT firmware is like your overclocking your router pushing it beyond the OEM limits. I use to use DD-WRT but had quit many years ago since the routers that used that firmware would fail too much.

So best to buy a better business type enterprise router wired then you can use WiFi router as AP or just get WiFi AP(access point). To me WiFi Router is also Wired Router, but to use just a wired router and use WiFi AP through a switch is better. If one or the other goes you can easy replace them. Where as if the WiFi Router fails you would need to replace it.

If you really want to use DD-WRT then Look at Buffalo WiFi Routers some come pre-installed with DD-WRT on them. Frankly you really don't need DD-WRT today because newer routers or WiFi routers are much better built and offer much more power NPU = network processor units and 128, 256, 512, 1GB of RAM some have Dual Cores.
 

http://www.techspot.com/community/topics/looking-for-new-wifi-router-will-tablet-smartphone-take-advantage-of-new-wifi-standards.207572/
Relevancy 15.05%

Hi guys, so my internet has been dropping a lot more recently (I have had this issue for about 4 months now). The odd thing that I cant figure out, is that it only happens on my desktop. Every other computer and phone can connect and doesnt drop wifi like the desktop does. Also, this happens when im wired through an ethernet cord. I have reinstalled network drivers, bought a wireless usb card, tried troubleshooting everything I can that I know how to do. Any other things I could try?

Thanks
 

A:Internet Drops Randomly

Specs for computer (make and model of computer that is having problems -or- make and model of the hardware)? Also, what wireless router (or modem) are you trying to connect to? What is your Operating System?
 

http://www.techspot.com/community/topics/internet-drops-randomly.208315/
Relevancy 16.77%

Hey, I'm a new member here with a problem!

I have a pair of Skullcandy Crushers with an arguably great built-in mic that turn on with a press of a button. However I built a new computer a few days ago and installed the latest version of the ASUS Realtek HD Audio manager, and while the audio on the headphones work, the mic refuses to work and isn't even recognized on programs like Skype and Hangouts.

I have tried the front two ports and tinkered with the settings and nothing has worked as of now, please help ASAP!

-Extabyte
 

A:Skullcandy Crusher mic not working with ASUS Realtek HD Audio Manager

Yeah thats because Skullcandys aren't really built for computers, just iPhone & Android. I had the same issue with my Skullcandy headphones and decided to buy a legit for PC headset. Sorry you spent your money on them!
 

http://www.techspot.com/community/topics/skullcandy-crusher-mic-not-working-with-asus-realtek-hd-audio-manager.204154/
Relevancy 15.05%

My laptop (Asus G73J) is connected to my router, however, has limited access. All other wireless devices in the house are able to connected to the router with internet, including another laptop. I have also already contacted my internet provider and my router provider to no avail. I looked at many other threads to see if anyone else has had my problem and as of now everyone who has, was able to fix it in ways that have not worked for me.

I have already put "ipconfig" in my command prompt and found out that I do not have a Default Gateway, in other words this shows up "Default Gatway .....:". Additionally it says that the Tunnel adapters have "Media Disconnected". I have been working on this for about 3 weeks, Please Help.
 

A:I am connected to the router with no internet

I've had similar intractable problems from time to time where even after reading up and posting for assistance you still remain stuck. Although I don't know the answer things that I'd try are checking to see if there is a firewall and turning it off briefly for purposes of elimination. I'd check to see if there is an updated driver for the wireless card. Have you been into Control Panel, Network and Sharing Centre and tried to set up a new network? Any problems flagged up in Computer, System Properties, Device Manager?

You haven't mentioned whether this is a problem that has arisen after a period of normal operation or whether it has been present from day one. If it worked OK previously as a last resort there's the return to factory condition option but it's a pain and you'd lose everything on the laptop so I'd hold fire on that. Can it connect to the router successfully with an ethernet cable?

Anyway that's a few things to think about if you've not tried them all already.
 

http://www.techspot.com/community/topics/i-am-connected-to-the-router-with-no-internet.208139/
Relevancy 35.26%

I remember some time ago I found a option which made my computer connect itself to the internet but now I cant find it.Help?
 

A:Have to manually connect to the internet on startup

Make and Model of computer? What Operating System are you using?
 

http://www.techspot.com/community/topics/have-to-manually-connect-to-the-internet-on-startup.207918/
Relevancy 24.51%

So I have a Toshiba Portege r500 with no H/d & a second one for parts. When I went to take the H/D and pop it in I realized the H/D hook-up cables are different. The "parts laptop" has a "FMUSH1" cable connecting it to the sata drive. The newer Portege has a cable labeled " FMUPH2" (I'm assuming for an SSD?)

My Question is....Can easily swap them somehow or is there an adapter/converter possibly?

Thanks in advance for any possible help!
 

A:Fmuph2 HDD Cable Issue (Toshiba Portege R500)

So with more research I'm thinking I have a ZIF Tape (Cable) that previously connected to a 1.8 SSD which I now need to convert to a 2.5 sata connection.
I ordered a 24-Pin ZIF to SATA Adapter Connector Card off eBay. It comes with its own "ribbon" (Tape/cable whatever) as shown in the pic. Will I need to replace the ZIF from my mobo with it? or is it simply in case "you" need it?
Also just wondering could I have swapped out the sata ribbon (Fmush1) with the ZIF ribbon (Fmuph2) where they connect to the MoBo instead? (It's extremely difficult to get to on this model and the "clips" seem very fragile so I avoided attempting it)
 

http://www.techspot.com/community/topics/fmuph2-hdd-cable-issue-toshiba-portege-r500.207530/
Relevancy 23.65%

Okay, this is very weird. when I connect to my wifi on my laptop the internet doesnt work. It says connected and everything. it says it has internet access. It just doesnt work. But if I connect my phone to the wifi and use USB tethering to my laptop it works. :/ Help please.
 

A:Wifi problem

Hey RenRoo.Have you tried a another browser? Does the wired connection to the router work? If yes, I would go into Device Manager, and click the + sign next to Network Adapters.Right click on the wireless adapter and select uninstall.Exit, reboot the system, allow the system to "find" the wireless adapter, then check and see if it will connect. If you still have the same problem, connect via your phone and in Device Manager, try to update the driver.
 

http://www.techspot.com/community/topics/wifi-problem.207956/
Relevancy 16.77%

hi guys wish you all a great new year.

im facing a very annoying issue with my laptop, some keys are not working, the left **** and the windows key I just don't know whats happening.

can someone please help mw with that.

thanks in advance.
 

http://www.techspot.com/community/topics/dell-inspiron-7537-shift-and-windows-key-not-working.207933/
Relevancy 14.62%

Toshiba laptop. Internet at the bottom right says there is a connection available, but says the settings saved on this computer for the network do not match the requirements of the network. It has to be plugged in to the modem to access Internet. Speakers do not work. Ports do not work either. I had it in for repair and he thought it might be the motherboard, but he couldn't fix the other one and I got help with Broni on here and it works fine now. I am hoping someone on here can help me fix this one. It has no viruses; it's clean. Thanks!
 

A:Laptop cannot access the Internet unless it is hooked to the modem

Ok, the modem=>pc config working says networking is at least sane.

To get the modem=>router=>pc to work, the pc should not have ANY configuration data stored in the network adapter settings. Can you find and clear the network adapter for yourself?
 

http://www.techspot.com/community/topics/laptop-cannot-access-the-internet-unless-it-is-hooked-to-the-modem.207405/
Relevancy 17.63%

Sometimes when I'm skyping, I want to play audio so I enable my stereo mix. I got a new computer though so I had to re install the realtek high definition audio recording. I've tried using it, but it doesn't work. It says it's enabled and it's my default device, and no green bars pop up to indicate it's working either. Any help would be cool, thanks.
 

http://www.techspot.com/community/topics/stereo-mix-enabled-but-not-working.207783/
Relevancy 26.23%

Over multiple devices on the network wifi works including this laptop I m running on However any time I try to use ethernet including on this laptop there is no internet connection The error when troubleshooting is Wi-Fi Works, Ethernet Doesn't Dns server not responding While on ethernet connection Wi-Fi Works, Ethernet Doesn't I can access the networked printer but cannot access the default gateway so connection is going from room to the modem and through I have tried restarting the wifi lan modem which then connects to another router down stairs which I haven t restarted my dad won t let me I have tried flushing dns uninstalling and re installing the adapter starting in safe mode with networking This is my ipconfig all while on wifi Windows IP Configuration Host Name Rob-Laptop Primary Dns Suffix Node Type Hybrid IP Routing Enabled No WINS Proxy Enabled No DNS Suffix Search List BigPond Wireless LAN adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description Microsoft Wi-Fi Direct Virtual Adapter Physical Address B - - - - - B DHCP Enabled Yes Autoconfiguration Enabled Yes Wireless LAN adapter Wi-Fi Connection-specific DNS Suffix BigPond Description Mediatek MT E bgn Wi-Fi Adapter Physical Address B - - - - - DHCP Enabled Yes Autoconfiguration Enabled Yes Link-local IPv Address fe c d f d a Preferred IPv Address Preferred Subnet Mask Lease Obtained Wednesday December PM Lease Expires Friday December PM Default Gateway DHCP Server DHCPv IAID DHCPv Client DUID - - - - B- - D-A - -A - - -C - DNS Servers NetBIOS over Tcpip Enabled Ethernet adapter Ethernet Media State Media disconnected Connection-specific DNS Suffix BigPond Description Realtek PCIe GBE Family Controller Physical Address -A - - -C - DHCP Enabled Yes Autoconfiguration Enabled Yes Tunnel adapter Teredo Tunneling Pseudo-Interface Connection-specific DNS Suffix Description Teredo Tunneling Pseudo-Interface Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes IPv Address d d e fbb a Preferred Link-local IPv Address fe e fbb a Preferred Default Gateway DHCPv IAID DHCPv Client DUID - - - - B- - D-A - -A - - -C - NetBIOS over Tcpip Disabled Tunnel adapter isatap BigPond Media State Media disconnected Connection-specific DNS Suffix BigPond Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes And here it is on Ethernet Windows IP Configuration Host Name Rob-Laptop Primary Dns Suffix Node Type Hybrid IP Routing Enabled No WINS Proxy Enabled No DNS Suffix Search List BigPond Wireless LAN adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description Microsoft Wi-Fi Direct Virtual Adapter Physical Address B - - - - - B DHCP Enabled Yes Autoconfiguration Enabled Yes Wireless LAN adapter Wi-Fi Media State Media disconnected Connection-specific DNS Suffix BigPond Description Mediatek MT E bgn Wi-Fi Adapter Physical Address B - - - - - DHCP Enabled Yes Autoconfiguration Enabled Yes Ethernet adapter Ethernet Connection-specific DNS Suffix BigPond Description Realtek PCIe GBE Family Controller Physical Address -A - - -C - DHCP Enabled Yes Autoconfiguration Enabled Yes Link-local IPv Address fe b c dc Preferred IPv Address Preferred Subnet Mask Lease Obtained Thursday December PM Lease Expires Friday December PM Default Gateway DHCP Server DHCPv IAID DHCPv Client DUID - - - - B- - D-A - -A - - -C - DNS Servers NetBIOS over Tcpip Enabled Tunnel adapter Teredo Tunneling Pseudo-Interface Media State Media disconnected Connection-specific DNS Suffix Description Teredo Tunneling Pseudo-Interface Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter isatap BigPond Media State Media disconnected Connection-specific DNS Suffix BigPond Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Any help you could give would be mu... Read more

http://www.techspot.com/community/topics/wi-fi-works-ethernet-doesnt.207715/
Relevancy 20.21%

About or months ago I switched to a new internet provider whom also sent me a new modem Problem is is that To My Party Modem How 3rd To Connect Provider's New My Service? this new modem prevents my burglar alarm s dial out alert system from contacting my nominated phone numbers during an activation test If I turn off the modem there is no problem the alarm works perfectly This would be fine except that my brother in law lives next door and uses my internet connection so it is inconvenient if I m away and have to switch the modem off to have the alarm fully functional Prior to the provider change over I was using a rd party TP-Link TD-W ND modem with my prior service provider This modem caused no problems at all with the function of the burglar alarm when left on Therefore I would like to use the TP-Link modem again but I can t get it to work on the new service From memory the modem that was supplied by the new provider was basically plug and play and all I did was just cable it in and there was no keyboard work required This is why I don t know why the TP modem doesn t work since I didn t change anything Evidently there are some How To Connect My 3rd Party Modem To My New Provider's Service? configurations that do need altering but I haven t got a clue Any help or ideas Tom nbsp

A:How To Connect My 3rd Party Modem To My New Provider's Service?

Hello there, You need to apply the appropriate ADSL and network settings on the modem so it can connect to your new provider's network. The ISP support should provide those. Hope you get it up and running soon.
 

http://www.techspot.com/community/topics/how-to-connect-my-3rd-party-modem-to-my-new-providers-service.207609/
Relevancy 22.79%

I am confused and have no idea where to start... I apologise in advance for the wall of text.

Recently I have been experiencing odd issues with my WiFi router ( at least I think its the router) ZyXel Keenetic Giga II. The most annoying of which is the periodic inability to load random webpages. For example, I might be able to load google but not any of the search results while at the same time being able to browse reddit on my phone or tablet. The pattern changed constantly and it doesn't seem to affect any particular web pages. Like I said - random. This happens once or twice a week and seems to be increasing in frequency. I have tried rebooting the router. Rolling back to factory settings, changing DNS. With no result. It only resolves itself when it "feels" like it and usually lasts from 5 min to several hours. It is also worth mentioning that I hardly ever use my laptop and most of the browsing and streaming is done using various mobile devices.

Any help in defeating my router would be greatly appreciated.
 

A:Strange issues with WiFi router

Describe "The most annoying of which is the periodic inability to load random webpages" in detail please - -
 

http://www.techspot.com/community/topics/strange-issues-with-wifi-router.207497/
Relevancy 22.79%

I got a new laptop recently (this past Sunday) and ever since I turned it on I've had horrible issues with WiFi. It's tothe point where I'm ready to return it to the store and just go without a computer. Keep in mind I'm not very tech savvy, so I might not know what you're talking about.

It's very slow and won't stay connected to the internet. 4/5 times it doesn't load the web page I'm trying to load and after about 5 minutes after powering on it disconnects from my Wi-Fi and refuses to reconnect. The troubleshooter says it's a router issue but resetting the router doesn't do anything at all and no other device in the house is having any issues. I haven't downloaded ANYTHING to it yet. In addition, when it /does/ connect to my Wi-Fi, trying to open any web page brings me to a "you are not connected to the internet" notice.



I have no idea what to do. I need a computer for work but I'm so sick of having problems with them.
 

A:Brand new laptop; faulty wifi process?

Set up the laptop next to the router where the signal should be strongest. Are you sure that you are connecting to your own wi fi network and router? When you switch on the laptop it will search for in range networks and when you spot your own you are asked to give the password before you can use the internet for the first time. If that's not happening maybe its logging you on to a neighbouring unsecured network (no password set) where the signal is weak. If I click on the wireless icon bottom right in my taskbar it brings up a choice of available networks. My icon looks like a set of steps and so the icon shows how strong the signal is. Check that you are connecting to your own router and see how strong the signal is. You mention other devices that work OK but haven't given any details.
 

http://www.techspot.com/community/topics/brand-new-laptop-faulty-wifi-process.207589/
Relevancy 14.62%

Is there any way of sharing hard drives/folder over the internet with the client side need to install anything.
I.e use add network location option in my computer
Or a client programme that is user friendly

The server side will need to run on my computer,
looked at FreeNas thats not an option,
Filezilla looks like it the best option server side of things but uses a client programe.

Im happy to run any programmes/OS's in a VM if that were needed.

Thanks in Advance
 

http://www.techspot.com/community/topics/sharing-hard-drive-over-internet-without-client-programes.207578/
Relevancy 25.8%

I am trying to connect my laptop with an external monitor through vga The good thing is that all VGA cables work And by work I mean I see image on the external screen many Vga are How there? cable. configurations BUT I have noticed something else On pin of the cables I bought I found out that pins and are Vga cable. How many configurations are there? interconnected short circuited On an another pin cable pin is missing non of the pins are Vga cable. How many configurations are there? interconnected How does that affects anything Well if I install the pin cable my external monitor is recognized for what it is LG Vga cable. How many configurations are there? l bla bla Also from within the Intel graphics control panel I am able to access many of the monitor features such as brightness contrast etc And I am not talking about the emulated gpu features I am talking about native monitor settings as if I was controlling them from the screen menu Now if I install the other cables pin pins connected my monitor is recognized as generic non pnp monitor and non of these functions are available PLUS when I turn my laptop off screen does not go into power saving mode but stays on complaining about signal error I searched around and found a number of diagrams and pin configurations It seems that the standard vga cable is nothing but standard I also run into posts of people with similar problems Can someone provide a short explanation Why not all vga cables are the same And in my case how do I know what cable to use So far I ordered from e-bay and all came with pins and connected They work but not with the extra features and that is somehow an inconvenience Thanx My Monitor is Lg Flatron L QTQ-SF And the laptop is Samsung NP V A- S GR nbsp

http://www.techspot.com/community/topics/vga-cable-how-many-configurations-are-there.207565/
Relevancy 14.62%

Hey guys, I was recently in the malware section, because my laptop had some problems and could not connect to the internet. Broni was very awesome and helped me clear my laptop up, but we still couldn't get it to connect to the internet. He advised me to come here for help.

I will link the previous thread, because there are some log files toward the end I think would be much more helpful than me explaining problems.

http://www.techspot.com/community/topics/infected-laptop.206911/page-2#post-1444892

Thank you so much for any help.
 

A:Trouble connecting to internet (Windows 8)

Can you try to re-install the WiFi driver?
 

http://www.techspot.com/community/topics/trouble-connecting-to-internet-windows-8.207500/
Relevancy 22.79%

Hi,
I installed Win 7 32 bit on my Lenovo G519 laptop. Now I want to use my wireless Internet but can't find the way I can turn on that laptop!!
I tried Fn+F5 and also F5 but it's still turned off.
How to turn on wireless in that laptop please?
 

A:How to turn on wifi in Lenovo G510

Do you see any yellow (!) in the device manager?
 

http://www.techspot.com/community/topics/how-to-turn-on-wifi-in-lenovo-g510.207096/
Relevancy 17.63%

I'm doing a simple build for my parents and when I boot it up the monitor doesn't respond. Everything is hooked up properly and I've tried a different monitor.
Processor - i3-3240 with hd 2500 integrated graphics
Motherboard - ASRock H61MV-ITX
 

A:Integrated graphics not working

Issue resolved. Sorry I dont know how to delete the thread
 

http://www.techspot.com/community/topics/integrated-graphics-not-working.207495/
Relevancy 20.21%

This all started after I reset the router putting in new pass code I m using same name of the old SSID When you click to Windows SSID was to unable connect on the wireless network connection on the name of my SSID on connect it saying Getting information from SSID this sounds like Windows was unable to connect to SSID good thing that windows can see the router and talk to it Type in the network key same thing looks like windows can see the router and talk Windows was unable to connect to SSID to it I type in the network key and OK Than it is saying windows was unable to connect to SSID name I have set up other computers and it can connect but this one computer running windows cannot I have the pass code down on paper and other computers can connect So wrong pass code is not the case The only thing I can think of is is computers using the old profile or my network card may need to be reset When I open networking sharing center and click on manage wireless networks I removed the old profiles in the list But I m not sure if there is still some kind of conflict or the old setting still there some where Well because I m using the same SSID despite the router reset and new pass code I m not sure why I cannot connect unless Windows was unable to connect to SSID the windows thinks I m connecting to the old SSID I tried to restart the computer and no change nbsp

A:Windows was unable to connect to SSID

Force the system to forget that SSD and then reboot.
Now look for it again and enter the passphrase.
 

http://www.techspot.com/community/topics/windows-was-unable-to-connect-to-ssid.207365/
Relevancy 15.05%

I have a toshiba laptop right at a year of having it, it will not allow me to get internet connection even though it shows its getting wifi or set up through the router.. Is this a virus or other issue
 

A:Toshiba Internet won't work

Moving this topic to appropriate forum.
 

http://www.techspot.com/community/topics/toshiba-internet-wont-work.207422/
Relevancy 15.05%

My toshiba will not get on the Internet Google will come up and search but everytime it says Internet error
 

A:Laptop Internet error

Need specific; try looking in the cmd-> enter eventvwr.msc
 

http://www.techspot.com/community/topics/laptop-internet-error.207423/
Relevancy 44.72%

I have a Windows 7 HP desktop system that is connected to the internet via an ethernet cable. The system says it is connected, and a ping confirms it is accessing the internet. BUT, all the browsers say the computer is not connected to the internet (tried Chrome, Firefox and IE). All of the Microsoft network adapters (6to4, ISATAP adapter, ISATAP adapter #2, Teredo Tunneling Adapter) shown under device manager cannot start (Code 10). the Realtek PCIe FE Family Controller is the only network adapter shown as working properly. What do I need to do to fix this? Let me know if there is any other information needed to help me.
 

A:Windows 7 computer says connect via ethernet and ping confirms but cannot get to any page

Does your router see this computer on the network?
Are you on Private Network or Home Network?
Is the IP address showing 192.168.x.x or is it showing 169.xx.xx.xx?

NIC network card you can do a few things. You can can disable it and re-able it.
Open dos prompt
type: ipconfig /flushdns
type: ipconfig /release
type: ipconfig /renew

Give this a sec or two.

Now under services.msc (use the control panel and type services)
Select view local services
Scroll down for
DHCP Client (right click and stop it) wait then right click and start it
DNS Client (right click and stop it) wait then right click and start it

If none of the above work go into the device manager. under control panel type: device manager. click on device manager

-Network adapters
-Realtek PCI-e this one uninstall the drivers (BUT DO NOT DELETE THEM)

Two options here.
One: Scan computer for new hardware changes
Two: Reboot the PC

Choose Two, because Windows will re-install the drivers and setup network card settings. for you. The Choosing One would do that same but you really want to flush out any prior issues that got you to this point.
 

http://www.techspot.com/community/topics/windows-7-computer-says-connect-via-ethernet-and-ping-confirms-but-cannot-get-to-any-page.207373/
Relevancy 43%

Updated my hardware drivers including the wireless adapter, and something must have gotten changed as I can not connect to wifi anymore on HP Notebook G72-253NR with Windows 7.

Flushed winsock, released/renewed ipconfig and deleted/reinstalled adapter. Can meanwhile connect thru Ethernet cable again but not wifi. Finds my wifi network (previously didn't) but can't connect, don't have tcp/ip addresses in LAC or wireless properties, automatically obtain is enabled. IPv4/6 enabled in both also.

Getting message of "HOST Process was prevented from changing settings of ZoneAlarm by modifying registry key HKCS/Services/VSDATANT? at initial startup.

"COM surrogate was prevented from changing settings of ZoneAlarm by modifying registry key HKCS/services/vsdatant" whenever I simply access/exit ip protocol settings.

How can I fix this? My brain is fried after several DAYS of trying to fix my friends computer... Please someone help!
 

A:Can't connect to wifi after hardware driver update

Call your ISP they will walk you through it.
 

http://www.techspot.com/community/topics/cant-connect-to-wifi-after-hardware-driver-update.206983/
Relevancy 17.2%

I just purchased screen quot DELL U H quot and a new computer The happy unboxing time turned to a nightmare when the noob I am could not connect the screen to the computer like the guy is doing in the youtube video Thanls Screen Info http accessories us dell com sna productdetail aspx c us amp cs amp l en amp sku -BBCG What I am trying to do This guy is connecting his screens to each other than to the PC but I am unable to achieve it 3 station configure screen my working Can't My Computer Spec Asus ROG G Desktop PC i Can't configure my 3 screen working station GB TB NVIDIA GTX - CPU Intel Core i - M Cache up to GHz - VGA NVIDIA GTX GD - OS Windows - Memory G DDR MHz - Storage TB SATA G ASUS Can't configure my 3 screen working station westorage years - ODD Blu-Ray X Combo - LAN Mbps - Audio -channel Audio SonicMaster - Card readerN A - Front I O - USB x - Mic Port x - Earphone port x - back I O x RJ LAN x HDMI-Out - x channel Audio - x USB x USB - x Power jack - power supply WAdapter - certificates BSMI CB CE FCC UL CCC Energy Star VCCI Graphic Card Spec http www asus com Graphics Cards GTX PHOC GD specifications nbsp

A:Can't configure my 3 screen working station

As far as I can tell, Nvidia doesn't support Surround (three monitors) via daisy-chaining (the card in the video was AMD Radeon). You might be able to get two monitors to work like that - some sort of DisplayPort MST support was added a while ago because of tiled 4k displays - but to get them all working they need to be plugged to the card directly.

As GTX750 doesn't have proper connectors, you might need to change your graphics card to something that has three DP outputs or 2xDP + HDMI.
 

http://www.techspot.com/community/topics/cant-configure-my-3-screen-working-station.206802/
Relevancy 73.1%

Hey guys, my laptop asus stopped working with wifi connection and I was just reading some posts here about this same problem but didn't find how to fix it.

I was uninstalling some programs from my pc but I didn't uninstall programs named "something wireless". I just took off what I knew I could.

I also tried the option "solve problems" in the wireless pc symbol and the answer was to connect my laptop to an ethernet cable...that never happened. Just now.

Does anyone knows how I get back my wireless connection? Pleasee
 

A:WiFi doesn't work only with cable ethernet

Powercycle the modem and router. Here is a specific order if you have a separate modem and router.
1. Shut down all PC's.
2. Shut down the Modem and router.
3. Power on the modem only. Wait 2 minutes or so.
4. Power on the router. Wait 2 minutes or so.
If you have a modem/router combo, then you don't need step 4.
5. Boot up the PC and see if you can connect.
 

http://www.techspot.com/community/topics/wifi-doesnt-work-only-with-cable-ethernet.207136/
Relevancy 22.79%

Hi all I have to the WLAN work as rather Router on from a WiFi LAN a a typical situation in my Internet and LAN setup My ISP provides me with a direct LAN cable that I need to connect either into my PC or into the WiFi Router WLAN port I also have a LAN that I need to connect to so I have installed a separate LAN card for the internal LAN purposes My two setups are below with their issues I hope someone can suggest a middle grounds to have a LAN and a WiFi too Scenario The ISP cable goes into the WLAN port of the Router Cables from the router goes into my PC network card and to other PCs for LAN purposes The PC cards are all configured to automatic IP LAN Internet WiFi is now available This works fine for a few days and then the internet stops working because there is a conflict of IP The ISP expects IPs like xxx and the one on the LAN Router for my PC is Scenario Router to work as a WiFi on the LAN rather from a WLAN The ISP cable goes into network card internet sharing is enabled Router to work as a WiFi on the LAN rather from a WLAN and automatic IP with the ISP s expected IP xxx Another cable goes from my PC s network card fixed IP into the regular LAN port of the same Router Without any issues over the months the Internet works the LAN works other PCs have fixed IPs too etc but no Wifi Can I have best of both the worlds in such a situation I can t install a rd network card for sure as the slot on the mother board is limited Please advise Thanks in advance Bhavbhuti nbsp

A:Router to work as a WiFi on the LAN rather from a WLAN

Code:

Scenario-1
isp==>(wan)router-->PC card-1, et al (conflict 123.237,234.xxx v 192.168.1.100)

Scenario-2
ISP===->pc card-1
pc card-2==>router
scenario-1 is a configuration or firmware condition
scenario-2 is a real security issue and the primary PC is basically acting as a DMZ server and is at risk.
Here's my setup:
Code:

isp==(wan)router-1--- PCs in the same room
|
+---(lan)router-2(with wifi) - - - wifi connections in the den

configuration to make this work with full file/print sharing:
router-2:

disable DHCP in this router
setup all WiFi settings here
notice: router-2 wan slot is left empty to make this work
Router-1:

set LAN address of router one as you please (eg: 192.168.1.1 )

set an address reservation for router-2's MAC -> a fixed, constant IP address on that same subnet (eg 192.168.1.254)
set the DHCP range small (eg 2-32)
router-1 will control all auto-ip assignments for both routers.

Personally, I add another tweak;

reserve ip addresses for all of my devices into the low-end of the dhcp range (say 2-10) and
let 'guests' take addresses above 10
This gives the opportunity to allow file/print sharing to known systems (2-10) and disallow for the guests.

Setup totally within the routers allow my laptop to travel and not be effected by these choices.
 

http://www.techspot.com/community/topics/router-to-work-as-a-wifi-on-the-lan-rather-from-a-wlan.207258/
Relevancy 24.08%

I have a toshiba satellite C870-11H. It used to ask for the password whenever it went to sleep. I checked and the system is still set to do so.

Some time ago I got fed up with the clowns at Microsoft thinking their latest update was more important than whatever I happened to be doing and destroying the work I was doing so they could load their rubbish. I set the system to ask me before doing an update. Well it doesn't bother to do that and now very rarely it does load an update without authority. Could it be that my system is now way out of date?

Is there a customer focused operating system that I could use instead?

Thanks.
 

A:Laptop stopped asking for password

Every OS is customer focused. Microsoft is for non-Mac machines and getting things done. Linux is more powerful but requires more techy-ness to use.

Maybe try Mac OSX.

But there's nothing wrong with Windows. Sounds like you have a decent amount of problems.
Run WIndows update, make sure it's completed every update.
Run CMD.exe in admin mode, run sfc /scannow

 

http://www.techspot.com/community/topics/laptop-stopped-asking-for-password.204405/
Relevancy 22.36%

Hello all,

I use an ADSL modem for accessing Internet in my home. I think my wifi password is stolen. I wanna change it but I have a computer only in my office and use the Internet in my home by my iPhone. Is there a way to change that password with my iPhone or should I surely use a computer to do that work, please?
 

A:How to change the Wifi password of an ADSL modem without a computer

Hello abbasi ,
You can use your iPhone to log in the router and change the wireless settings, however this isn't usually recommended. If something goes wrong when configuring the wireless settings and you are not able to connect to the router you'll need a device that can be connected via Ethernet cable to restore the access.
If this router is supplied by your ISP you can ask them if they have remote access to it to change the password.
Hope that helps.
 

http://www.techspot.com/community/topics/how-to-change-the-wifi-password-of-an-adsl-modem-without-a-computer.207093/
Relevancy 16.77%

Hello hello After having a problem with my cd dvd drive I rebooted my computer and did a clean install of Windows from my Vista So right now I m running Windows Windows not install (Touch/slider) FN - 7 Clean Keys working I have a VAIO - VGN-CS J Windows looks and feels great so far The only problem is my little sliding touch pad at the top doesn t work I don t know if it s FN keys but on top of my keyboard there s a little sliding touch pad for volume along with a fast forward rewind key I used to be able to slide the volume up from there but now it s not working I looked it up and I know this has to do with my clean install of windows I tried installing a bunch of drivers like everyone said online Sony Shared Libraries Vaio Event Notebook Control Device And a bunch of other drivers that people talked about I don t know what s wrong but it s still not working so I did a system restore to before I installed everything so that I can have a clean slate Can someone please help me fix my volume control slider please Thank you so much nbsp

A:Clean install Windows 7 - FN Keys (Touch/slider) not working

Laptops have extras over and above Windows and if you reinstall the OS or upgrade it you lose these. I've been there and done that with the FZ. It was broken when I bought it and the hard drive had been removed. Fixing the computer was very hard, installing Windows 7 was easy. Afterwards, like yourself I found that the function keys didn't work. Trawling forums and looking for drivers then sorting it out took ages and that was the most challenging part of the whole exercise. Everything necessary was on the Sony support sites but these were not user friendly and I needed to use several Sony sites. Needless to say Sony support were clueless. In the end I got everything functioning but if you can manage with things as they are I'd not bother. One tip, although it might not work with your particular Vaio model is that stuff has to be installed in a particular order otherwise some keys don't work.

That'll teach you to mess with Windows when a cd/dvd plays up.
 

http://www.techspot.com/community/topics/clean-install-windows-7-fn-keys-touch-slider-not-working.207046/
Relevancy 35.26%

I laptop My wirelessly to will the connect not internet have had my laptop for around a year and it has always connected to the internet both wirelessly and through the cable Suddenly for no apparent reason about a week ago it stopped working All that I had done was turn on my quot Guest Account quot and download Skype It worked for a few minutes after this and then stopped completely- if I hovered over the wireless connection on the bottom right of my screen there is a big red cross and it tells me that there are no wireless networks available in the range We have another laptop which we use from My laptop will not connect wirelessly to the internet the exact same location within the My laptop will not connect wirelessly to the internet house and this connects no problem it also finds another or so wireless networks in the neighbourhood I know that there is not a problem with my router modem as I can connect via my other computer I have not done anything to the laptop except the installation above- I tried uninstalling this and turning off the Guest Account but still no joy I looked at other posts on here and tried some of the things suggested but still no joy I thought I would try to be clever also and think I have actually made this worse so that it is now beyond repair I know with most computer based things uninstalling and reinstalling it can work tried this and have now uninstalled my wireless network cannot now find where it is to reinstall If you are able to give me suggestions to fix this please treat me as a novice as although I know some things about computers I really don t know enough to decipher some of the more technical terms Thanks in advance nbsp

A:My laptop will not connect wirelessly to the internet

bangj001 said:





I have had my laptop for around a year and it has always connected to the internet both wirelessly and through the cable. Suddenly, for no apparent reason, about a week ago it stopped working.

All that I had done was turn on my "Guest Account" and download Skype. It worked for a few minutes after this and then stopped completely- if I hovered over the wireless connection on the bottom right of my screen, there is a big red cross and it tells me that there are no wireless networks available in the range.

We have another laptop which we use from the exact same location within the house and this connects no problem, it also finds another 7 or so wireless networks in the neighbourhood.

I know that there is not a problem with my router/modem as I can connect via my other computer. I have not done anything to the laptop except the installation above- I tried uninstalling this and turning off the Guest Account but still no joy.

I looked at other posts on here and tried some of the things suggested but still no joy.... I thought I would try to be clever also and think I have actually made this worse so that it is now beyond repair!! I know with most computer based things, uninstalling and reinstalling it can work... tried this and have now uninstalled my wireless network...cannot now find where it is to reinstall!

If you are able to give me suggestions to fix this, please treat me as a novice as although I know some things about computers, I really don't know enough to decipher some of the more technical terms! Thanks in advanceClick to expand...

I assume you're using some sort of windows machine. Have you tried a system restore to a previous state when the OS used to work?
if not you should try that first by going to Programs>accesories>system tools> system re-store and select a time from when the laptop used to work fine.

Mm
 

http://www.techspot.com/community/topics/my-laptop-will-not-connect-wirelessly-to-the-internet.158976/
Relevancy 15.05%

Hi I have also been experinsing these problems. I am a video game player as well and whenever I try to play on my laptop my internet disconnects. But all my other devices that use wifi work fine. Also there is nothing wrong with my computer because it works fine on other networks such as my schools. I recently moved and am now using a different internet provider ,centerylink. I think I have to change my modem channel but centurylinks website were you change modem settings is a scam. The website does not work and my parents think theres something wrong with my computer and are refusing to change internet service providers. So I am wondering how If I can change modem channels a different way.

Moderator note - This post removed from this thread: http://www.techspot.com/community/topics/internet-keeps-disconnecting-randomly.205710/#post-1439822 to avoid hijacking.
 

A:Internet disconnects

Hi, You might have another wifi signal very close to your house that is on 'your' channel, it happens.
You can only move your channel to one of three different frequencies, that is the lowest, the middle or the highest one. So say your current channel is 6, there is no point going to 7, it's still too close.
If the 'other' problem wifi channel near you is say '1' then you should try to go to the other end of the range.
You change your WiFi channel in your router, then your laptop will find it.
You don't need a website to do that, it's between your laptop and your router.
You make the changes through any web browser, and the details will probably be on the label of your router.
But this might not the problem, although it's a fairly easy one to 'fix' if it is.
 

http://www.techspot.com/community/topics/internet-disconnects.206830/
Relevancy 34.4%

The (Tp internet connect to 740n) router link via Unable to router worked fine in the past until recently my ISP had a break in the cable line and repaired it Now I am unable to connect to the internet If Unable to connect to internet via router (Tp link 740n) I connect the ISP s LAN cable directly to PC windows and do the following steps Control panel gt View network stats and tasks Setup a new connection or network gt Connect to the internet gt Next Broadband PPPOE gt Next Type in username password gt Connect Internet works fine This means there is no problem with the internet connection However if I connect the ISP s LAN cable to the quot blue quot port of the router and the short LAN cable to my PC then do the following steps Open http tplinklogin net It shows me router config page Click Quick setup gt Next Select PPPoE gt Next Type in username password gt Next Leave the Wireless Page untouched gt Next Click Reboot Wait till router reboots It does not work the router page shows quot Connecting quot but does not connect at all Here s the router log TL-WR N System Log Time - - s H-Ver WR N v S-Ver Build Rel n L M W PPPoE W M G st day OTHER INFO User clear system log st day PPP NOTICE PPPoE start connecting st day PPP NOTICE Standard authentication st day PPP INFO pppd start st day PPP INFO sent PADI Host-Uniq x st day PPP INFO sent PADI Host-Uniq x st day PPP INFO sent PADI Host-Uniq x st day PPP ERROR Timeout waiting for PADO packets st day PPP NOTICE Standard authentication st day PPP INFO pppd start st day PPP INFO sent PADI Host-Uniq x de st day PPP INFO sent PADI Host-Uniq x de st day PPP INFO sent PADI Host-Uniq x de st day PPP ERROR Timeout waiting for PADO packets st day PPP NOTICE Standard authentication st day PPP INFO pppd start st day PPP INFO sent PADI Host-Uniq x d st day PPP INFO sent PADI Host-Uniq x d st day PPP INFO sent PADI Host-Uniq x d st day PPP ERROR Timeout waiting for PADO packets st day PPP NOTICE Standard authentication st day PPP INFO pppd start st day PPP INFO sent PADI Host-Uniq x st day PPP INFO sent PADI Host-Uniq x st day PPP INFO sent PADI Host-Uniq x nbsp

A:Unable to connect to internet via router (Tp link 740n)

Please help me
 

http://www.techspot.com/community/topics/unable-to-connect-to-internet-via-router-tp-link-740n.206843/