Windows Support Forum

wd ses device in the important update

Q: wd ses device in the important update

today i did check for new update
and the windows 8.1 updater found an important update
western digital techologies-other hardware-wd ses device

but i haven't western digital hard drivers'a laptop with a ssd installed

did you notice such upate?


Relevancy 100%
Preferred Solution: wd ses device in the important update

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link (This link will automatically start a download of Reimage that you can save to your computer.)

A: wd ses device in the important update

I didn't get one. Did you install the SSD or did it come with your PC? If you installed it, it could be that the drivers from your old(possibly a WD?) and any registry keys are picked up by Windows update. I've noticed with Ccleaner, it shows a program that is already uninstalled sometimes in Cleaner Applications tab. I then have to go into the registry and do a recursive search for left over keys so it will stop showing up.
Or are you using an USB HDD?
Relevancy 21.93%


first I already wanna thank everybody who replies to this and try to help me. Yesterday morning I tried to download a sound driver that would make the Stereo Mix option available. It was not from the original website of Realtek or HP. It was from here: After I finished the installation and restarted my PC there was a red cross next to the sound icon and when I tried to open volumemixer it said 'No audio output device installed'. I tried to uninstall it with system restore. Than I also tried to install the latest sound drivers from the Realtek and HP site but both didn't work. Also I saw on another topic that maybe some services were stopped but that wasn't. Now I really don't know what to do. Hope someone can help me.


PC manufactrurer: HP
Operating system: Windows Vista Home Premium SP2 32-bit

A:There is no output device (Realtek HD Audio)

Your PC manufacturer is HP but what is the model?
Relevancy 21.93%

Hi, as the title suggests I've got a bit of a sound problem:

I wish to record some of my digital sound (e.g. my friends in Skype) using Audacity and stereo mix. However, using the built-in stereo mix record feature Audacity has, no sound is being recorded. So I checked out the stereo mix device under 'recording devices' in 'Sound' and found that it was not detecting any sound at all.

I'm not totally sure as to how all it's settings must be, but it's like this now:

Listen to: enabled
Playback through: Speakers (Realtek HD Audio)

The device is set to be 'used' ofcourse.

Any help would be greatly appreciated...


A:No sound coming through 'stereo mix' device

Go to Edit -> Preferences and to the 'Audio I/O' or 'Devices' tab, and make sure the the audio INPUT is set to the source you want to hear from, in this case, the pc sound card or such, apparently Windows 7 does not change the input device when you select the Stereo Mix function for some reason.

If that's not the case, maybe your sound driver isn't allowing the stereo mix to work, you can try the Control Panel configuring method, which you can find at the audacity website (i can't set up links yet, but go to and add this: index.php?title=Mixer_Toolbar_Issues#Using_the_Control_Panel) [sorry for this, but it's for a good reason, i'm not a bot/spam ]
kind of a pain to read through and configure everything, but will fix the issue.

If you don't want any trouble at all, you can just plug you speaker in the PC's 'Line In' plug (the blue one), and set Audacity's Input device to "Line in" or such.

Good luck.
Relevancy 17.2%

AMD has launched their first WQHL-certified Catalyst graphics card driver update since December 2014, bringing a heap of new features and performance updates across the board, as well as the usual array of bug fixes.

Read more

A:AMD launches major GPU driver update: Catalyst 15.7 WHQL

I have played with the CFX and Freesync support on the Acer 1440p 144hz monitor. Works great and makes me want to actually own a Freesync monitor now...
Relevancy 21.93%

Hi All,
This is my first post here
So the issue I am facing is that I have a Dell Laptop with dual graphics card (Intel(R) 4400 integrated and AMD Radeon 8850m dedicated). The System would not detect any AMD driver installed on it. The device manager was showing only the Intel Graphics Card being installed .
Then I went on to uninstall the Catalyst Command Center from Control Panel, wherein I completely uninstalled the AMD Graphics driver and everything related to it.
Now, AMD is not at all being recognized by my system. Device manager doesnt show it even in hidden devices, DriverEasy scan doesnt read it, Even Dell System detect is failing to detect the AMD graphics Card.

How do I proceed ahead with this issue.

Have I somehow unmounted the hardware internally?
Is there anyway besides a factory reset to get this working again ( I have concerns with a factory reset also not helping me )
What system scan tools can I use to get my laptop to recognize the Device again?
Please Help
Thanks In Advance

A:AMD Radeon 8850m device is missing

Have you tried going to Dell support site and down loading the orginal drivers and software for your graphics.
Relevancy 21.07%

I was updating my graphics card drivers for my graphic card PNY GEFORCE GTX 660 and went to device manager, I used ?automatically search for new driver? and a dialog box appeared "Windows has determined that the driver is up to date".
Yet, I went to Nvidia website and did a driver update. I checked again Device manager for my display adapter and the new driver was TWO MONTHS NEWER.
I wonder why that happens.
Relevancy 17.2%

I have a Razer BlackWidow keyboard Recently I downloaded and installed the latest version of Razer s Synapse on update keys swapped firmware Razer BlackWidow to try and fix this issue I was having with my Naga Lo and behold my Naga issues Razer firmware update swapped keys on BlackWidow were fixed but another problem emerged The new version of Synapse added support for the BlackWidow and also upgraded the firmware But after the upgrade my Windows and Alt keys have been swapped so when Razer firmware update swapped keys on BlackWidow I press one I get the other The only way I ve been able to fix it so far is to use SharpKeys to switch the keys back around but when I connect another keyboard that keyboard now has its Windows and Alt keys swapped It s not that big Razer firmware update swapped keys on BlackWidow of a deal but I do swap to a quieter keyboard late at night from time-to-time and I would really prefer to have it fixed without having to rely on a workaround like this I ve check around and I can t find any information about this issue and Razer s support website is completely useless as usual Likewise I haven t had any luck so far with downgrading the firmware either Does anybody have any idea on what I could do particularly other BlackWidow owners nbsp

A:Razer firmware update swapped keys on BlackWidow

Can't you just go into Synapse and assign the Windows key to the Alt key and vice versa? All the keys are programmable and hopefully this wouldn't affect your other keyboard.
Relevancy 17.2%

I have a Gateway NE56R and ever since I updated to windows 8.1 I cannot use the internet at home even though it says it is connected to WiFi, but it works at other places. Please help asap
Relevancy 21.93%

I have one problem with my PC sound on board,
My pc is windows 7 ultimate 32bit, Intel Desktop Board E210882,
The driver is already install but the icon of sound still red cross like image attach file, I already plug in the headset, any one please help me?

thank, seahong heng

A:No audio output device is installed

Well, one way or another, your computer isn't using the device, so have you checked to see if it's disabled in any way? right click the speaker and go to playback devices, it'll come up with a list of your sound devices, make sure the one you're trying to use isn't disabled (right click to change that) if you're unsure which is yours, just enable them all lemme know if that helps at all
Relevancy 17.63%

The impending launch of DirectX 12 is one of the more exciting things to happen in PC gaming in recent years. Many people are eager to see how the low level API will improve the performance of games that implement...

Read more

A:You can now test DirectX 12 yourself with latest 3DMark update

This is way windows is doomed. DirectX 12 should be available for win 7-10, but MS is so greedy, they cant seem to understand why they are disliked and windows will evientaly be destroyed by Google. Just look at there market share. I betting big on SteamOS, and once it takes off, I will take the jump. Windows is now to bloated, and with greed, I hope all backers back Vulkan. DX12 on Win 10 only has officially broke the camel back.
Relevancy 17.2%

A while ago, after accidentally opening the Store app, Windows forced me to restart to install Windows 8.1, which I was unable to weeks before because of driver issues. I didn't need Windows 8.1 yet, so I didn't download it before then.

However, during the installation, it failed (again) due to either my antivirus or the aforementioned driver issues. Upon logging back in, my computer was unable to find any WiFi networks. Seeing as I live in the middle of a densely populated city, this isn't possible. Plugging in an ethernet cord still works, so no issues with that adapter or my home internet. I checked all the drivers for my WiFi adapter, and my Ethernet adapter, and both are up to date and display as working properly. Restarting several times didn't seem to fix this issue, and using system restore didn't seem to work either. I used the Troubleshooting tool, and that didn't give my any helpful advice or answers, so I got nothing.

What can I do to fix this issue?

For reference, I have a Broadcom 802.11ac Network Adapter, Driver Version, and a Qualcomm Atheros AR8151 PCI-E Gigabit Ethernet Controller, Driver Version

A:Unable to connect to WiFi after failed Windows 8.1 update

Never mind, it seems to have resolved itself overnight after I put it to sleep for several hours.
Relevancy 21.93%

Hi, Could anyone tell me any ideas on trying to get my usb device to work again. Not recognizing on my computer. Went into device managers and can see unknown device. I have tried uninstalled it and pluged it back in but all it says is successful installed unknown device. The computer doesnt even know what it is. Is it possible to try and install a driver for it and tell it that its a usb device?

Thank you

A:Sandisk Cruzer unknown device

Sometimes the drives just die. This shouldn't be a driver issue, do other flash drives work in the computer? Have you tried this drive in a different computer?

You could open up disk management and see if you can delete the partition and create a new one, or simply format the existing one as NTFS or exfat. WARNING: Doing this will cause you to lose any data you may have on the drive.
Relevancy 21.07%

I've a External HDD( Western Digital company-500GB) which was working properly last night but today it's not working. when I connect the EXt. HDD to my laptop usb port then it's got power but not shows in my computer.
when I go to device management it shows a window (you need to initialize before logical disk management can access it.) but when I go to initialize the HDD then show it "the media write protected". I cann't initialize the HDD and cann't access the HDD.

Someone help me to recover my old DATA from this Ext. HDD.

Thanks for advance.

A:External HDD not recognize my laptop & cann't initialize it from Device manegment

Hello Rajib Sarker,
The first important thing to note here is that if you initialize your HDD you will lose all the information that was stored on it. Sometimes portable external HDDs can behave like that if they are not getting enough power. It would be a good idea to try and connect your HDD using a different USB cable, preferably a short one. Another thing you can try is connecting your HDD to different USB ports and to a different computer. You can also run WD DLG diagnostics tool to test the HDD .
Hope that helps.
Relevancy 17.63%

Updated my hardware drivers including the wireless adapter, and something must have gotten changed as I can not connect to wifi anymore on HP Notebook G72-253NR with Windows 7.

Flushed winsock, released/renewed ipconfig and deleted/reinstalled adapter. Can meanwhile connect thru Ethernet cable again but not wifi. Finds my wifi network (previously didn't) but can't connect, don't have tcp/ip addresses in LAC or wireless properties, automatically obtain is enabled. IPv4/6 enabled in both also.

Getting message of "HOST Process was prevented from changing settings of ZoneAlarm by modifying registry key HKCS/Services/VSDATANT? at initial startup.

"COM surrogate was prevented from changing settings of ZoneAlarm by modifying registry key HKCS/services/vsdatant" whenever I simply access/exit ip protocol settings.

How can I fix this? My brain is fried after several DAYS of trying to fix my friends computer... Please someone help!

A:Can't connect to wifi after hardware driver update

Call your ISP they will walk you through it.
Relevancy 21.93%

My Asus DRW 24B1ST CD/DVD-Rom device works in Dos (bootCD works no problems), and is recognized by my WinXP Device Manager and listed as working properly. But when I try to run or view a disk from My Computer, all I get is a blank window. The window has the correct partition/drive identity, so I know it's pointing to the device, but it just won't interact with the disk.

The same device was working fine in a previous WinXP installation on the same computer, but when I installed another WinXP sp2 (I had lost access to the original installation) I had a few glitches and this is the remaining one that needs to be fixed.

BTW, I can bootup from a bootCD and run a miniXP and have no problem with the CD/DVD-ROM device, so the issue must be with the current WinXP installation.

Any suggestions for repairing this problem?

A:CD-ROM device won't open or run disk

Wow very interesting. Yo had mentioned it will boot to disc, have you tried while in safe mode. So if you restart computer and utilize the function f8 button go to safe mode with networking check to see if it works in there. If it does then I assume it is driver related issue. Of course in safe mode it loads minimum drivers to have a functioning safe environment. Even though windows recognizes it in device manager does not mean it has a working driver. I would even go as far as uninstalling the driver and reinstalling one from the manufactures website. You could first try uninstalling the driver then rebooting the computer then letting windows reinstalling the driver upon boot up to see if that fixes it first. Hope this helps let me know what you find.
Relevancy 21.07%


I'm using a Huawei Mobile Broadband E303 and I've been having this problem for 6-7 days now Ples halp
It was working perfectly fine before but now the speed wont go past 60-70kbps.
My current operating system is windows 7 ( V 6.1.7601 )

I've tried using it on other laptops with windows 7/xp/vista as their operating systems still the same problem except for my brothers laptop which runs on windows 8. and dont tell me that this Thing wont work because its not compatible with my operating system, because I've been using it for over a year without an issue.

My ipconfig shows:
Mobile Broadband adapter Mobile Broadband Connection:

Connection-specific DNS Suffix . :
Link-local IPv6 Address . . . . . : fe80::7450:69bc:7a3e:fee8%57
IPv4 Address. . . . . . . . . . . :
Subnet Mask . . . . . . . . . . . :
Default Gateway . . . . . . . . . :
And when I try to do nslookup:
Default Server:

The default server shouldn't be that thing. please help. Nor the address

Edit: I've tried Uninstalling the Program which came with the USB.
I've tried calling my ISP, with no problems on their end.
Relevancy 22.36%

"No Audio Device" is the message I get when I try to adjust the volume from my "Start" button. I have an old Dell-Optiplex270 running Windows XP with an external speaker unit. I have "RealTech Audio Device" and VLC" Media Player. I read where I need to download "SoundMAX". Help!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!1
Relevancy 21.5%

I have headphones through onboard audio set as the default playback device.

I have HDMI set to listen stereo mix (onboard) under recording devices so that I can get duplicate audio on my headphones and TV.

Windows 7 likes to set as HMDI audio as the default playback device when I am not looking (assumedly shortly after rebooting, but not quite sure when). And then I get no sound from my headphones because the programs are all playing on HDMI.

Is there way I can fix this?

A:HDMI hijacks default playback device

Hmm; I think HDMI is mutually exclusive to pc { speakers & headphones }. If the HDMI senses a signal to the tv, then the others go off.

right-click on the speaker icon in the tray and view/set the playback devices
Relevancy 18.06%

Motherboard:ASUS M5A97 R2.0
OS:Windows 8.1 64-bit

I hardly know anything about the BIOS so I am asking you this:
Will I need to update my BIOS and if so how to do that?
Am I going to update it to the latest version(2103) or the version when the processor was first compatible(1006)?

Please help, I do not want to make a mistake when updating so please provide a detailed explanation ! ! !

A:BIOS update

Some might say updating the BIOS is not worth the risk unless you have a reason to chance it. On the other hand I've never had a BIOS update go badly. BIOS updates are not that difficult to do. But there is always a risk of the update failing. In the off chance of failure, the motherboard will be bricked. There are motherboards that come with a second BIOS for failsafe. I don't know if the failsafe can be used under a bricked board, I will assume it can until I hear otherwise.

There are three ways to update that I am aware of. All of which may not be available depending on motherboard model and age of system.

Within the Operating System (I've used this method but for awhile it was advised against)
You will need to download BIOS Update application. The application will download and install the new BIOS.

Within the BIOS
Within the BIOS there is an update facility. You will only need the new BIOS. (My BIOS will only update from a USB stick.)

From DOS utility
Not only will you need to download the new BIOS, you will need to download the flash utility that is designed for the update.

I recommend updating from within the BIOS (assuming you have this option). Download the new BIOS to a USB stick and then boot into the BIOS. Browse around to find the update facility and the rest is self explanatory.
Relevancy 21.5%


I have a problem when I turn on my laptop I get a no bootable device, hit any key prompt. There are no options in the boot manager. I am able to get into the BIOS by pressing the f2 key I think but I really have no idea what to do from there. Any help would be greatly appreciated,


A:Packard Bell Easynote TE No bootable device

Sounds as though your hard drive has went bad.. Once you get into bios see if it is reporting your hard drive. If not the its rather safe to say . Your hard drive is bad.
Relevancy 17.63%

Hi there
need to know if I can upgrade my graphics card for upgrade to windows 7.
current graphic card:ati radeon 9200 se 128mb ddr tvo
computer :fujitsu siemens scaleo 600
motherboard :microstar ms-6585 2.oa
power supply:dc output 250w
thanks so much.

A:Graphics card update to host windows 7

I don't know if you CAN upgrade your graphics card, but:

You most likely don't NEED to.
It's not really a good idea to upgrade at all. Those parts are old as dirt and you won't find anything cheap that'll fit.
Relevancy 21.93%

I just bought a

Amd A6 6400k apu

ecs a55f2-m4 motherboard

kingston hyperx 4gb 1600 ram

and I installed all drivers but even when I try to open solitaire it says no suitable graphics device found.

A:No suitable graphics device found

Which graphics driver and version did you install?

AMD Catalyst 14.4

32-bit Catalyst Software Suite
64-bit Catalyst Software Suite
Relevancy 19.35%

Yesterday, I started a download and kept the pc on with my Seagate FreeAgent GoFlex External HDD 1TB plugged in. After I woke up I realized that there was a power cut and the computer went off unexpectadly (I had no UPS or any backup system).And, I found that my Ext HDD was not seen in my computer anymore (It was working perfectly until before I went to bed).
In device manager, under 'Disks' it shows 'GoFlex Hard Disk', but in BIOS or Disk Manager there is no sign of this HDD.

I really need the data in the HDD badly. Please help me recover it.
P.S. I read somewhere that keeping the HDD in freezer might help and give a little more time. Is that true? Worth the risk?

A:External HDD gets detected in Device Manager but not Disk Manager or seen in 'My Computer'

Power outage probably killed something in the enclosure or its PSU. The drive in the enclosure is probably fine. I would remove the drive from the enclosure and put it in a dock or install it in a desktop computer before considering freezing it. Freezing is usually reserved for click of death drives, and a last ditch effort.
Relevancy 21.5%

I have two WD 3tb external drives. They both work but only one at a time. I am running Windows 7. I have renamed both drives but still no go. I have previously have had a 2tb and one the 3tb drives running at the same time with no problem. I had to upgrade to the 3tb from the 2tb because of the size of my projects I am working on. Does anyone have a solution?
Relevancy 21.5%

My partner's laptop HP 0700 Notebook will not boot up and just comes up with the above message. We found an HP troubleshooting site which said to reset the BIOS default settings by pressing the Escp key, F10 followed by F9 to reset. Then it said to press the F2 System Diagnostics keys which tested the hard disk and all the tests came out OK. When we tried to restart it, it came up with the same message and we have noticed that before it comes up with this message it says in the bottom left-hand corner "Prepare boot to OS" and then comes up with the message in the heading. We have not bootable disk as the laptop already had everything installed.

Coupled with this my partner's virus protection is coming up with "Threat detected" every minute on practically every site my partner visits on the Internet. You will appreciate that we cannot run any virus checks as we cannot get into the computer.

Any suggestions would be very much appreciated.


A:No bootable device - insert boot disk and press any key

Any luck with this?
Relevancy 21.93%


I want to buy new mobile and I need your advice
most imprtant for me the speed of the system ,,memory
thing not important for me ( quality of camera,,shape of mobile )

A:Any tips on buying a new mobile device?

By mobile I infer you mean cell phone. At any rate, I would prioritize the features and functions that are (a) import to you and (b) you use regularly. The hype on specs may be create bragging rights, but that's not worth $0.02 to me.

I'm and old T**d and love my 3g flip phone for the ease of use designed by Nokia. The so called smartphones are not on my wishlist. If I want pictures (and I take a ton of them), I'm not using any camera in a phone - - I take my handheld which gives me the PAS feature for low-light photograph required for indoor and museums. USEABILITY is big with me.
Relevancy 19.35%

I just got new SSD - Transcend 128GB. Installed Windows. When I cold boot my PC -- from a shut off state -- I get this message before Windows loads: "Reboot and select proper boot device or insert boot media in selected boot device and press a key."

However, if I press Ctrl+Alt+Delete and reboot I come into Windows.

If I enter BIOS from cold boot, it does not detect my SSD. After rebooting it detects my SSD. Seems like the SSD is slow at firing up?

I have run chkdsk and memory test without any errors.

My motherboard is the MSI Z87-G55.

A:"Reboot and select proper boot device"

Just installed newest BIOS, it didn't help.

When I go into Board Explorer in BIOS it says SATA port 1 is empty. After reboot it says the same port is occupied by my SSD.

Update: Plugged in another hard drive (non-SSD). Same rules apply to it. On cold boot, none of the drives are detected. After reboot, both drives are detected. I used a non-SSD as system drive before this, worked perfectly.
Relevancy 17.63%

I have no idea why this happened, after the update none of the ports on my computer work after booting into windows. bios was updated before this and all was fine. checked in bios if ports were enabled. still no joy. help!!!
Relevancy 32.25%

This is not intended to be a sob story but I just want you to know what it is all about. I have a niece that is slowly deteriorating from MS. She does not have much that she can do anymore but one of her enjoyments is playing a game called WSOP Challenge (world series of poker challenge). Right during Christmas the game stopped working and Sprint can't seem to help her get it back on her phone. She called me asking if I knew what to do and I tried but could not find any info on what she needed to do to get it working. Sprint told her to delete it from her phone which was not a good idea because I have found no where that she can download it from and put it back on her phone. Would anyone be so kind to give me some advice on how to fix her problem. Time is not on her side but what she does have left I want it to be very enjoyable. Thanks so much for your help.
Relevancy 21.5%

I've a wired network at home like this:

ADSL Router
Dlink Switcher
| | |
I'm going to buy a new tablet (ASUS MeMO Pad Smart 10), which supports internet through wifi. I was wondering how can I share the internet access with the new device? What new devices should I buy and what changes are required to my network setup?

Thanks in advance.

A:How to share wired Internet access with WiFi device

I figured it out, I need an AP.
Relevancy 19.35%

HDD 1 tb Seagate hardisk not working,is not visible in the laptop, can b seen in device manager for 1min then gets disconnected automatically and the light on the hard disk starts blinking

A:HDD hardisk not working,not visible in the laptop,visible in device manager for 1min then disconnect

If the system worked before with this drive, I would say the drive is bad.
Relevancy 22.36%

Hi I was wondering can anybody help with the sound on my computer please as we have had none for about 3 weeks now thanks

A:No sound device

Please make sure ALL connections are snug. What OS are you using? XP,W7,W8 ?
Relevancy 18.92%

Hello. I've got a basic problem I guess: I messed up with the Realtek microphone settings and selected "Set Default Device". I tried to fix it but I kinda destroyed my mic. - friends tell me they can hear me like I'm closer to them and they hear me worse than before. I just need to unset the Set Default Device thingy but I don't really know how.. any idea?

A:Realtek Microphone "Set Default Device"

Try doing a system restore to a previous time in which this was working correctly.
Relevancy 21.5%

I built a new PC about a month ago, and have been using speakers as a primary Audio source. However, I bought a Turtle Beach PX21 headset, and all I can do is watch Netflix/Other media ETC. I can't use Skype or Steam calls because it won't register the headset as a recording device. Why is this ?

I was using this as a reference:

,but they don't go over my problem.

Thanks !
Relevancy 21.93%


I've removed a lot of things yesterday and when i check today, i lost sound. I think I accidentally removed something related to sound drivers or something like that...but I don't remember what.
There is no volume control in the taskbar. I have reinstalled the audio device and everything is fine but still no sound. I also checked the device manager and there is no any conflicts.

Here is my sound devices information in the attachments.

Thank for helping

A:Have audio device installed but still no sound

Did you also try looking in Add/Remove Programs to first uninstall Realtek from there?

If not, try that.
Relevancy 31.82%

Hello all, I wanted to get some opinions one what parts are most important to upgrade for improved workflow and video preview for video editing applications like sony vegas. Basically I edit bluray video for amv's (animated music video's) and my preview window and basic workflow speed can be choppy and not quite as smooth as I want it to be. Does CPU have biggest effect with this kind of stuff (and if it does, would you suggest a hexa core CPU or would something like an i7 4770k quad core CPU be enough for editing bluray footage)? or is computer RAM important? I also heard that Doing something with your hard drive can have a greater effect in improving these things. Any thoughts appreciated! Also, assume money isn't a factor, just want what performs better.

A:Important parts for improving workflow in video editing?

RAM + a fast CPU are large parts of a video editing build. RAM and a good CPU help speed up the rendering process, but they dont necessarily affect the video render quality. I think the GPU is the issue.

What are you current specifications? What is your price range for the new machine?
Relevancy 21.07%

I have a Sony Vaio Windows 7 laptop that is a couple of years old. I recently had my Norton protection end and I turned on the Windows Defender, but my computer has been running really slow and acting up. I have been getting a S.M.A.R.T. hard drive error when my computer starts as well. I tried restoring my computer to an earlier setting, but that didn't work. I don't know what to do, and I really could use some help. When I ran an error check on the c hard drive this is what it said: WDC WD32 00BEVT-26A23T0 SATA Disk Device volume: c/. So please if anyone can help me fix this problem or how to fix it that would be great!!
Relevancy 21.5%

Please help me I have a custom made computer with front audio jacks I have recently added in a new device and Reappear(Quickly) Headphones/Microphone Disappear motherboard and I decided not to connect the front jacks because I won t Headphones/Microphone device Disappear and Reappear(Quickly) need them How I found this problem was I saw my cpu usage very high for some Headphones/Microphone device Disappear and Reappear(Quickly) reason and found out the dcomlaunch is using up - cpu I then found out that dcomlaunch is to do with the plug-ins aka the front audio jacks which are disconnected Every time my headphone and microphone devices within sound start disappearing and reappearing the dcomlaunch skyrockets using cpu When headphones was up I quickly went into the properties and it has Jack information L R Front panel mm jack as well as microphone the same I have tried disabling them however that doesn t work I ve tried re installing the high definition audio driver but that is not the problem I really think it is because the front panel is disconnected and I want to know if there is a way to get around this without reconnected the front panel nbsp
Relevancy 18.06%

I cannot know how the bios update so I need some help for the how the bios update.I want to install the newest driver but I can't figure out how the driver is in a .02 file and I can't make heads or tails of it can anyone help me?

A:How to update BIOS

astar master said:

I cannot know how the bios update so I need some help for the how the bios update.I want to install the newest driver but I can't figure out how the driver is in a .02 file and I can't make heads or tails of it can anyone help me?Click to expand...

please post the brand/model of your motherboard... I.e.: ecsg41-tm; intel dh55tc; asrock z77 extreme4
Relevancy 18.06%

Do you have to update or change the Motherboard to update the processor?

I have a Pentium 4 processor 548, 3.33GHz, 1MB L2 cache, 533MHz front side bus. Can one "Plug and Play" so to speak with an updated processor to the same Motherboard?

A:Motherboard/Processor update

Your CPU socket is PPGA478, P4 is the highest CPU this socket will support.

Even with LGA775 CPU socket, unless you had a motherboard that would support quad core, there would be little reason to upgrade over a complete system replacement.

In answer to your question to "Plug and Play", yes and no. Yes CPU's are basically plug and play, and No the motherboard must support the CPU first.
Relevancy 18.06%

Hey guys, I've attempted a bios update through this website and I've been left with this sitting on my desktop for two days and the loading bar has not moved an inch.
I tried to update the BIOS because for the last few weeks when my computer is booting the screen would go blank and just stay blank and I would have to keep resetting until it would finally boot. I was hoping a bios update would do the trick otherwise I would not have bothered.

Im worried if I exit out or shut-down my computer I could corrupt my BIOS. Any ideas?..


A:Bios update help

I would exit and maybe try again. Thats the download phase which has nothing to do with the actual update process. The download will complete, before any attempts to update will begin. Updating the BIOS can be very risky, updating would never be handicapped by possible problems of downloading.
Relevancy 21.5%

Hi, so my integrated webcam isn't showing up and I'm trying to confirm whether it's died or not. I know the first step is to go to the manufacture's website, but as an Asus user I wasn't able to find anything to help me solve this problem asides from this model knowledge base.

Here's my Device Manager Data link below (first time using mediafire so let me know if it works)

Model info:
Windows 7 x64

Thanks so much!
Relevancy 21.93%

Hello First time posting here I apologize if this is not in the correct forum Anyway I have been having some showing device Dxdiag not display trouble with my graphics card drivers I experienced some graphical glitches followed by a blue screen of death a few days ago and since then my graphics card has not been working I have groups of vertical lines running down my screen My dxdiag does not show anything for display device I am using Dxdiag not showing display device an NVIDIA GeForce GTS and when I open the device manager it gives me error code for display adapters Additionally when I try to open the NVIDIA control Dxdiag not showing display device panel it says I am not currently using a display attached to an NVIDIA GPU I have reinstalled the drivers several times using both the express and custom clean install I have run driver sweeper in safe mode Nothing I have done has had any effect Please help At this point I am assuming I need a new graphics card but am hoping there might be another issue Here is my dxdiag ------------------ System Information ------------------ Time of this report Machine name DAN-PC Operating System Windows Ultimate -bit Build Service Pack win sp gdr - Language English Regional Setting English System Manufacturer System manufacturer System Model System Product Name BIOS BIOS Date Ver Processor Intel R Core TM CPU GHz CPUs GHz Memory MB RAM Available OS Memory MB RAM Page File MB used MB available Windows Dir C Windows DirectX Version DirectX DX Setup Parameters Not found User DPI Setting Using System DPI System DPI Setting DPI percent DWM DPI Scaling Disabled DxDiag Version bit Unicode ------------ DxDiag Notes ------------ Display Tab No problems found Sound Tab No problems found Sound Tab No problems found Sound Tab No problems found Input Tab No problems found -------------------- DirectX Debug Levels -------------------- Direct D retail DirectDraw retail DirectInput retail DirectMusic retail DirectPlay retail DirectSound retail DirectShow retail --------------- Display Devices --------------- Card name Manufacturer Chip type DAC type Device Key Enum Display Memory n a Dedicated Memory n a Shared Memory n a Current Mode x bit Hz Driver Name Driver File Version Driver Version DDI Version unknown Driver Model unknown Driver Attributes Final Retail Driver Date Size bytes WHQL Logo d n a WHQL Date Stamp n a Device Identifier D B EE - - CF-B -B DAEC CB Vendor ID x Device ID x SubSys ID x Revision ID x Driver Strong Name Unknown Rank Of Driver Unknown Video Accel Deinterlace Caps n a D D Overlay n a DXVA-HD n a DDraw Status Not Available D D Status Not Available AGP Status Not Available ------------- Sound Devices ------------- Description Speakers High Definition Audio Device Default Sound Playback Yes Default Voice Playback Yes Hardware ID HDAUDIO FUNC amp VEN EC amp DEV amp SUBSYS B amp REV Manufacturer ID Product ID Type WDM Driver Name HdAudio sys Driver Version English Driver Attributes Final Retail WHQL Logo d Yes Date and Size bytes Other Files Driver Provider Microsoft HW Accel Level Basic Cap Flags xF F Min Max Sample Rate Static Strm HW Mix Bufs Static Strm HW D Bufs HW Memory Voice Management No EAX tm Listen Src No No I DL tm Listen Src No No Sensaura tm ZoomFX tm No Description Digital Audio S PDIF High Definition Audio Device Default Sound Playback No Default Voice Playback No Hardware ID HDAUDIO FUNC amp VEN EC amp DEV amp SUBSYS B amp REV Manufacturer ID Product ID Type WDM Driver Name HdAudio sys Driver Version English Driver Attributes Final Retail WHQL Logo d Yes Date and Size bytes Other Files Driver Provider Microsoft HW Accel Level Basic Cap Flags xF F Min Max Sample Rate Static Strm HW Mix Bufs Static Strm HW D Bufs HW Memory Voice Management No EAX tm Listen Src No No I DL tm Listen Src No No Sensaura tm ZoomFX tm No Description Digital Audio S PDIF High Definition Audio Device Default Sound Playback No Default Voice Playback No Hardware ID HDAUDIO FUNC amp VEN EC amp DEV am... Read more

A:Dxdiag not showing display device

Are you sure your DVI, display port, HDMI, etc is connected to the graphics card not to the onboard graphics? Try reseating the card on another PCIe x16 slot. Make sure the display connections are connected to the GPU not the onboard graphics. Do the clean install to the latest stable drivers (314). Driver sweeper should have cured any software issues. If the reseating, checking the connectors, etc doesnt work, it is most likely an issue with the card.
Relevancy 21.93%

Hi guys So Can't default as boot set SSD to device seem a quick background here I went from using a normal HDD with windows bit os and unplugged it while I installed bit windows os on my new SSD samsung booted up no problem after setting the sata controller Can't seem to set SSD as default boot device to AHCI and shut down to put my hdd back in as a storage drive not Can't seem to set SSD as default boot device yet wanting to format the drive just incase I have any issues with my ssd I can still use the pc via the hdd Booted up fine however it was running in IDE So I used the regedit suggested by windows of setting the value data box to and it caused a bsod I then read that I had to do the regedit for both the ssd and hdd so I did which lead to no problems booting up and running AHCI just fine However the only way I can force my computer to boot using the ssd is to hit F for boot menu and select it it is not an option inside my BIOS and by default every time it will just boot from my hdd unless it s not plugged in in which case it ll boot the ssd When it boots from hdd as always if not using f menu it ll show the ssd as drive E effectively everything works ok but having to hit f every time I boot up or restart to select the boot device is going to get tedious Just to elaborate what I mean by it not being an option in the bios I have the Gigabyte H M-UD H motherboard and the only boot devices that are displayed in the bios are Floppy LS Hard Disk CDROM ZIP USB-FDD USB-ZIP USB-CDROM USB-HDD Legacy Lan With Hard Disk selected it ll behave as described above To clarify the only way I can appear to chose to boot from the ssd is via the boot menu F Is there any way I can properly set it so the ssd is the primary boot device Baring in mind I don t want to format the hdd at the moment nbsp

A:Can't seem to set SSD as default boot device

So you can only boot into the 32 bit version of Windows?
Relevancy 18.06%

Hellow guys again ,, hello the best website ever !!!
I jus wanna ask about something ,, Earlier I mentioned something about upgrading my processor to core 2 duo ,, now ive done that but when ever I start my computer ,, this msg shows up !
""" 1801 - microcode update Error
Missing or invalid processor microcode update. please contact hewlett-packard company for a new microcode update to support the new processor stepping """
Any help ?
HP compaq dx7300 microtower is my pc and Intel core 2 duo E4500 @2.20GHz is the new processor.
Many thanks in advance

A:Microcode update Error ?

Have you tried contacting HP concerning it?
Relevancy 17.2%

A few months ago I updated my MSI Z A-GD to the latest BIOS quot vP quot which is still the latest settings Z68A-GD55 update won't MSI overclocking changes allow to BIOS after version on MSI s website as of today Since updating to this version the UEFI BIOS screen is totally different the layout has been changed entirely I was able to find the overclocking settings quickly but since the update the board will not allow me to change many settings All CPU Memory chipset voltage adjustments CPU ratio adjustments bclock adjustments etc are all either greyed MSI Z68A-GD55 won't allow changes to overclocking settings after BIOS update out and cannot be selected at all or they are set to quot Auto quot and that is the only available option for them This is a solid overclocking motherboard from what I ve heard online and I m running a K series CPU k so I m really perplexed as to why I can t even adjust the supposedly unlocked CPU ratio on my k I USED to be able to use these settings before the BIOS flash Also I can t seem to find anyone online who s having a similar problem as me As it stands now the only overclocking I can do is with MSI s quot OC Genie II quot which basically automatically overclocks for me I think this is totally ridiculous why is MSI s automated tool allowed to touch these settings when I can t modify them manually Anyone have any idea what s going on My first thought was that maybe there is a setting somewhere in the BIOS that must be enabled first in order to open up the overclocking settings but I searched far and wide and couldn t find one Any help would be greatly appreciated nbsp

A:MSI Z68A-GD55 won't allow changes to overclocking settings after BIOS update

Yeah, I think there is a setting somewhere that is checked to auto. Try exploring all the tabs of the BIOS screen and report back if you find anything.
Relevancy 22.36%

A friend just handed me a Panimage device & I'm wondering if RAM can be added to it because its slower than a turtle. She wants to use it around the house, but so far its very sloooooooow.
I haven't gone thru the website I linked to yet, but if anybody has any experience with this type of device, I'm listening.TIA

A:Help with a Panimage device

Look it up on xda developers. Might be able to find some useful info on rooting the tablet or flashing it w/ custom ROM to make it snappier. As far as hardware goes, other than adding microSD card for additional storage, there isn't much you can do w/ a tablet. Might be able to OC the tablet, but that typically requires root access and depends on the hardware.

edit: One thing I forgot to ask is whether the latest firmware is installed?
Relevancy 18.06%

Hello! I'm new here at Tech Spot. This is a great website.

Where can I get a copy of the newest BIOS update for my motherboard?

Model: Asus P5GD1-VM Motherboard
Version: 0602
Chipset: I915
Date: 09/06/2005-16:48:11
Onboard Sound: Azalia (swa)
Onboard LAN: Exist (wl)
BIOS Size: 512 K

I downloaded all BIOS .ROM files in the official website of Asus. But it weren't compatible with the BIOS to be flashed.

Please help me! Thank you very much in advanced!

A:Motherboard BIOS update

The latest BIOS for your board is version 1015. It's not necessary to load each BIOS in order, just load the latest. To load the BIOS you must copy it to a floppy disc and rename it P5GD1-VM.ROM If you didn't rename it, that's why it won't load. On the same Asus download page, you can get the user manual for your board, which goes into detail how to reflash the BIOS. It can render your motherboard un-bootable if you do it wrong, so I would read the manual before attempting it again, and follow instructions carefully.
Relevancy 32.25%

New system just built a week ago:

Asus P8Z77-V Pro
i7 3770K
F3-12800CL9D-8GBSR2 DDR3-1600 8GB(4GB*2)KIT CL9 1.25V
OCZ Vector 2.5" 128GB SSD Indilinx Barefoot3 HD1237 VTR1-25SAT3-128G
Windows 8
The problem is, every 2nd or 3rd time I boot up I get a message by that white flag on the bottom right with a red X on it saying 'restart your PC to repair drive error (Important).

I have attached two screenshots at the bottom showing the messages I get within windows, then a short video of what happens when it reboots.

Thank you for any help you can provide.


A:Restart your PC to repair drive error (important)

I'm not familiar with SSDs. It is safe to run a check on it, and what software would you recommend?
Relevancy 17.63%

Hi I m a new member I recently decided to build my first PC Parts were Asrock Z Extreme MoBo Intel i K - LGA DDR Single stick GB G-Skill GeForce GTX GD OC Seagate Barracuder SATA TB w PSU Now for the problem - BIOS error Extreme update Z77 4 Asrock I installed everything correctly and got to POST so I decided to follow most Internet forum instructions to update my BIOS so I did so over the Internet flash update from the AsRock BIOS setup The problems arose after trying to update it via the Internet Now the motherboard won t even get to POST or show any signs or working Asrock Extreme 4 Z77 - BIOS update error on a monitor the fans for ten graphics card CPU and chassis all work the PSU is working fine But the Dr Debug is showing the status code which states in the description is that it is quot not used quot I don t know what to do iv taken out the graphics card and tried still the same disconnected everything except the socket and all pins are fine on the PCIe slots and RAM Any help would be appreciated ps I have a spare Gigabyte gt GB hanging round and was wondering if I can get the MoBo to work will it be worth sticking the in with the for any improvements however slight until I can afford another for SLI nbsp

A:Asrock Extreme 4 Z77 - BIOS update error

"Now the motherboard won't even get to POST or show any signs or working on a monitor" You might be able to get the motherboard to respond by removing the battery for a few minutes. If not, the motherboard may need to be replaced
Relevancy 22.36%

Hi everyone.
I have a drawing tablet "Wacom Bamboo MTE-450A" connected through a USB port.
never had any problems with it, lately it started "connecting" and "disconnecting" making this USB plug/unplug sound, just like it was physically disconnected an dosnt get any power, even if im not using it or moving it, and its getting worse to a point where now its mostly "off".
I changed cables and changed the port it was connected to, I also reinstalled the drivers, and there is no change.
I tested it on a different computer and it seems to work properly! other devices connected to my PC through USB seem to work well (keyboard and mouse).
I have a new computer so I believe its not to blame (hardware-wise)

im lost, any advice would be appreciated.

A:USB device trouble

The tablet may not getting enough power from the new computers USB ports. Check the computers bios to make sure that the Legacy USB settings are enabled
Relevancy 22.36%

I've been looking through forums to figure out how to get sound on my desktop and I've downloaded numerous devices, yet no help. Can anyone help me? I've been dealing with this probably with over 3 months and I can't take it anymore.

A:No audio device

What is the model of your PC?
Relevancy 17.63%

Hi guys I am looking to upgrade my graphics card this christmas and was looking at moving up to a http www amazon co uk Asus-GeForc update card needed Graphics help s computers amp ie UTF amp qid amp sr - from a http www geforce com hardware Graphics card update help needed desktop-gpus geforce-gt- -channel My system specs are as follows Operating system Windows Home Premium x Service Pack build Install Language English United States System Locale English United Graphics card update help needed Kingdom Installed System Model Hewlett-Packard HP Compaq Elite CMT PC System Serial Number CZC XR Asset Tag CZC XR Chassis Serial Number CZC XR Enclosure Type Mini-Tower Processor gigahertz Intel Core i - kilobyte primary memory cache kilobyte secondary memory cache kilobyte tertiary memory cache -bit ready Multi-core total Hyper-threaded total Main Cirucit Board Board Hewlett-Packard Serial Number CZC XR Bus Clock megahertz BIOS Hewlett-Packard J v Controllers Intel R Desktop Workstation Server Express Chipset SATA AHCI Controller Display NVIDIA GeForce GT Display adapter HP LA Monitor quot vis s n CN RZ September Bus Adaptors Intel R Series C Series Chipset Family USB Enhanced Host Controller - C Intel R Series C Series Chipset Family USB Enhanced Host Controller - C D Multimedia NVIDIA High Definition Audio x Realtek High Definition Audio http h www hp com products quickspecs na na pdf lt Link to the user manual model is on the third page the Business PC I am currently using a GeForce Gt card which is quite old and struggles with performance on some games I am interested in the Asus GeForce TI but have no clue if it will even work in my machine I looked towards the manual for my pc and it suggested cards worse than I currently have and I want better performance not worse The manual says that I have x Full length PCI slots x PCI Express slot and x Full Length PCI Express x graphics The TI has according to amazon quot PCI Express amp PCI Express support quot and looking at the specifications of both on their respective websites the GT uses PCIE x and the GT TI uses PCIE Given that the GT is already working in a PCI Express slot is it safe to assume the would be compatible GT specs http www geforce co uk hardware desktop-gpus geforce-gt- -channel specifications GT TI specs http www asus com Graphics Cards NVIDIA Series ENGTX Ti DCII TOP DI GD specifications Would this card work and if not could you suggest a card similar in capability that would Thanks in advance nbsp

A:Graphics card update help needed

Yes that video card will work with your motherboard.

However, it may not be the best value for money compared to the current gen video cards on offer.

For example, the newer Nvidia GTX 660 is the same price as the 560 Ti and offers around 30% more performance. Alternatively, the AMD Radeon HD 7850 costs even less and still offers better performance than the 560 Ti. I would highly recommend you go with one of these (doesn't have to be that exact model of 660 or 7850).
Relevancy 21.93%

I have a tiny USB fiber optic Xmas tree that was given to me as a gift and it can only be used when plugged into a USB port when the computer is on. Then the tree lights up, the colors change, and all that.
I would like to use this device when the computer is not on, thereby plugging it into a wall outlet. It is a very small simple little fiber optic tree 5V, and I'd rather not burn the little thing to pieces by purchasing the wrong adapter.
Some adapters are for charging only, aren't they? I'm not really charging this device just letting it run. Any advice?
Thank you in advance.

A:Adapting a USB device to plug into AC - converter to buy?

The charging adapters will be just fine, all they are doing is supplying the correct voltage. The more expensive ones can provide more milliamps for bigger USB devices (like a 10" tablet as opposed to something like an iPod Shuffle). I'd say you could buy the cheapest one possible, but you may want to check the tree for its amperage draw and be sure you don't get a wall adapter that provides less than the tree wants.
Relevancy 18.06%

Hello techspot, Basically I think ineed to update my BIOS in order to run call of duty black ops 2, but I Don't know.

Basically when I try to run the game, my pc freeze's then shuts down and says no signal detected, I've been looking all over the inet to try find a solution and came across a forum where people were having the same problem. (They're all using AMD) Alot of the people there said they contacted there motherboard supplier's and asked for a flash drive update or something? to update their BIOS. After doing this they said the game started to work.
Please help.

my motherboard is a N68-VS3 FX, If someone could link me to the correct update for it that would be grand. im on windows 7 if that helps


P.S , Sorry I think I posted this in the wrong section

A:BIOS update? FX
Relevancy 21.93%

My HP Pavilion DV9000 laptop has no sound. During Device Manager does not show any sound. I had sound, it worked, but today I had nothing. I have a Windows 7 Ultimate on it. I do not understand anything. What could be the cause?
thank you

A:No audio output device

Those HP dv9000's run hot and it is possible that the sound chip on the motherboard has failed... If this is the case, there should be a yellow exclamation point on the audio device driver in the device manager
Relevancy 21.93%

I have a windows xp computer and about a month ago my computer would no longer play sound and in the control panel everything was grayed out. Im pretty sure my soundcard is built in, in a chipset. I also remember installing malwarebytes to try to clean up my computer and I remember it sayin it deleted a trojan in system volume restore or somethin like that. I system restored to a bunch of points and that didnt work. I checked the BIOS and everything is normal. I've tried to install many audio driivers.I've gone to the device manager and I dont know if my sound driver is even there anymore nor do I know what it was. Please help, trust me I've googled this topic for at least a month with no avail.

A:The dreaded no audio device

List any Problem devices

Make sure devices are connected and powered on
Click Start->Run, enter: msinfo32. Click the + sign next to Components to expand it
Click Problem Devices. Anything appear?
If yes, click on it, Ctrl-A to select all, Ctrl-C to copy it, Ctrl-V to paste into next post
On the other hand, if no devices are listed, tell me so
Generate and attach a DirectX report

Click Start->Run, enter dxdiag and click OK
===> If you?re running 32 bit Windows, dxdiag will launch on its own
===> If you?re running 64 bit Windows, you?ll see 64-bit DxDiag. Click it to launch the 64-bit version of dxdiag
Notice progress in lower left window corner
When done, click Save Information button and save as a text file to your Desktop
Attach it to your next post by clicking the Upload a File button
Relevancy 31.82%

I was going to go for this Seagate 500GB ext. hd but then saw this one for $10 more it has 1TB of space and (according to the customer reviews) has a standard USB 3 cable. I found the same model on bestdirect for less. I have ordered from Memory Express who do price beats but they told me the product is discontinued, probably because of the new Go Flux line. Is this true and does it matter? The person at Memory Express directed me towards another Seagate hd of a different model. I checked out the reviews on newegg and it has 3 stars and says they have discontinued it.

How important is it to get a non-discontinued product (and why is there a discrepancy between retailers as to what's discontinued?) and how important are the customer reviews?
Relevancy 17.2%

I hope someone could help me with this...when I connect my Blackberry to my computer this shows up "there is no disk in the drive. please insert a disk into drive device harddisk1 dr22" and sometimes it deletes everything thats in my phone...
I hope you have any ideas and thanks in advance : )

A:There is no disk in the drive, please insert a disk into drive device harddisk1 dr22

You might need to install a new micro-SDHC flash card into your phone
Relevancy 18.06%

I noticed yesterday that HP was auto-updating wireless updates. After they had finished, my wireless capability was gone. There was a problem with my Intel Centrino N 1030 wireless driver, and have not been able to correct the problem. Also, when I try to restart it takes forever, and I get a notification when it finally does that there was a critical blue-screen error?
Please help!

A:Can't connect wirelessly after update

What version of Windows?
Relevancy 17.2%

Hi all I Acer update 8935g driver screen GPU blank after recently updated the driver for the Ati card in my laptop during the installation the screen had gone blank and has stayed that way ever since But first heres a back story I started having trouble with the laptop a few months ago when I assume the ati card had overheated and caused the screen to flicker this laptop comes with an Intel card also which you can switch to by pressing the power save button near the keyboard The intel card ran just fine and if I output the video through hdmi the ati card would work fine also Acer 8935g screen blank after GPU driver update which led me to Acer 8935g screen blank after GPU driver update believe that there maybe an issue with the screen Also if I kept pressing the power save button and switching between cards the ati card would eventually begin to work normally on the laptops screen I wanted to update my drivers today as they were a couple of years old I had trouble installing them in the past as there was a conflict between both gpu cards so I became frustrated and left it I used Ati s auto detect tool and it began to install the new drivers when the screen went blank I thought this was normal during a driver update but I left the laptop running and it stayed that way for over an hour So I turned the laptop off using the main power button Probably wasnt a good idea I imagine Now the screen just stays blank even if I try to switch to the intel card Any help on this issue will be much appreciated nbsp

A:Acer 8935g screen blank after GPU driver update

It might be the inverter or the backlight for the LCD. Have you tried using the HDMI output on both cards if the Intel integrated supports HDMI out?
Relevancy 21.5%

Hi there I own an Alesis Multimix Firewire which I use to record music on my PC I connect this to my Computer via can (Code 12) use that free This enough it cannot device resources find VIA PCI IEEE Adapter Firewire Everything s been fine up until now it seems my computer won t recognize when the firewire cable is connected to the computer So I flipped open the motherboard and made sure the adapter was connected into the slot properly as sometimes it can slide out a bit since it is at a weird angle when the PC sits upright I rebooted again and it said that the Firewire adapter had been detected Tried connecting the Alesis and still nothing Went into System and Device Manager and under the IEEE Bus host controller tab it shows OHCI Compliant IEEE Host Controller with a highlighted exclamation mark over it I click into the properties of this and it says under This device cannot find enough free resources that it can use (Code 12) the General Tab This device cannot find enough free resources that it can use Code If you want to use this device you will need to disable one of the other devices on this system More specifically under the This device cannot find enough free resources that it can use (Code 12) Details Tab it says this PCI VEN amp DEV This device cannot find enough free resources that it can use (Code 12) amp SUBSYS amp REV amp DC A amp amp Not sure entirely what this means I googled it and a lot of ppl saying to try and update the drivers etc but I don t think that this will do any good as the last driver was back in and I don t think any new drivers have been made since Looking for a logical answer to this one Any help would be greatly appreciated Attached a DXdiag file below too Thanks nbsp

A:This device cannot find enough free resources that it can use (Code 12)

Looks like the motherboard's USB channels or chipset needs to be updated or re-installed
Relevancy 22.36%

I bought a laptop from a on line site. It is a Dell Inspiron 1545. I'am not able to connect it to my wireless printer. It tells me that installation has failed every time I try. It has a bluetooth device installed on it. Help? What should I do????
Relevancy 18.06%

so im deciding to upgrade my mobo that supports pci 2.0 I was wondering does 2.0 support 2.1 because im going to put a budget radeon card in it note this is not a gaming pc just a little upgrade

A:Mobo update

Yes, PCIE 2.0 will support a 2.1 card.
Relevancy 17.63%


I'm trying to update the drivers on my Radeon x600 256MB graphics card with Windows XP 32 bit.

I downloaded the following file described as the ATI Catalyst Driver 10.2 (XP): download-euro <dot> oldapps <dot> com/ATI/10-2_xp32_dd_ccc_wdm_enu.exe

On running this download, it has installed Catalyst Install Manager in C:\Program Files\ATI\CIM\Bin, but I have no idea what I need to do next!

Running Install Manager and following the steps through seems to do something, though looking at device manager, it doesn't look as though the driver has been updated (it's still version

Thanks in advance

A:Radeon x600 XP driver update

Try the WDM Integrated Driver here :
Relevancy 21.93%

I am running Win 7 64 on a built PC. I had a gforce 9500 and 4 gigs of RAM on a Asus M4A77TD mobo. I upgraded to a GTX 550 Ti 2g and 8 gigs of 1600 RAM.

Just before I upgraded and the partial reason for the upgrade was the 9500 was making a weird grinding sound and the com started losing signal to the video card and the usb connections (Keyboard and mouse).

I thought installing the new equipment would fix the issue, but alas it has not. Its not after anything specific that it happens. I was running a game for 2 hours and it happened, I also left my comp on over night and it happened when I got up in the morning. It would seem to be more a time or length of time the computer is on that it will happen.

Any thoughts, help or solutions?

Thanks guys!

A:Video and USB device loss

You put in a lot better graphic card and you increased the RAM.

Still on the same power supply?

Thats my thoughts, replace the power supply with something good.
Relevancy 21.93%

I got in a HP DV - DX today with the error code F which then says quot No boot device present Install operating system quot This system was apperantly running normally and then was going slow so the user reset it and started getting that error I thought this was a dying drive or corrupt boot sector but this code continued to any will DV7-1245DX not boot HP device when the hard drive had been removed and the system would find no other boot devices I tried bootable cd s dvd s and a bootable USB stick that I know works and the system does not see any The odd thing is it CAN run a disk scan on the hard drive when its plugged in It just does not see it in the boot manager The boot manager is actually blank showing no HP DV7-1245DX will not boot to any device options for devices I setup the boot order properly and made sure quot HP DV7-1245DX will not boot to any device cd drive quot HP DV7-1245DX will not boot to any device was enabled as a boot device but this changed nothing I tried bios defaults also I removed the memory tested each individually unplugged the power and cmos and put everything back in plugged in another hard drive with a different windows install nothing changes the error I put the original hard drive in an enclosure and ran a MBR rebuild on it with EASEUS and a disk scan which returned no errors the system still could not boot to the device The only thing I can think at this point is that the disk controller went bad Any other thoughts I have tried multiple motherboard repair services around the country for previous laptops with motherboard issues but never found a reliable one usually get them back to die a few days later so if this is a disk controller issue this system gets sold for parts nbsp

A:HP DV7-1245DX will not boot to any device

Just an update, I fixed this in a way that makes absolutely no sense. I gave up and then just started messing around with it. I put two hard drives in instead of 1 and it booted right up. Removed them put back in the original now it works fine. All I can think of is that the drive controller was somehow corrrupted, and even with bios reset stayed messed up; then the 2 drives somehow got it working again (2 drives providing input somehow fired it up?). Anyways, I hope this obscure happenstance helps someone else.
Relevancy 21.5%

hi, I have a 2 year old emachine e630 notebook with both usb ports broken. I do not want to spend money replacing ports. I can't find detailed information about the mb except that it is an acer e630 mb. i would like to know if the mb has a socket for an internal blue tooth device or where i can find this information. I have looked at the on line manual but there is no mention of socket.

I would be very grateful for any information, and as this is my 1st post on any forum site i hope its in the right place, thank you

A:Can I put a internal Bluetooth device into a eMachines e630

You could use one of these... If the PCMCIA socket is still working:
Relevancy 22.36%

Hi, I'm having problems with my Hp Pavilon g6-1b60us Notebook pc.... (laptop)
at first i thought it was the hard drive that was dead , don't know! i bought a new one and still says no bootable device> is it the cable ??? maybe ,,, I need urgent HELP!
(it says first>> media test failure, check cable
After it says>> No Bottable device-- insert boot disk and press any key
i tried installing windows xp because it's the only C.D i have, but when it comes to accepting the terms ... it says press F8... and i press it and it does press .....
soooo can someone help me pleaseeeee!! thank U! God Bless

A:No bootable device -- why?

sjhoann said:

i tried installing windows xp because it's the only C.D i have, but when it comes to accepting the terms ... it says press F8... and i press it and it does press .....Click to expand...

You need to wait about this many more after you press F8 .....................................................................................................................................................................................................................
no joke, good luck!

Don't you have the restore disk that came with it? Check HP's website for info on system restore.
Relevancy 21.5%


I have a Telstra Elite Mobile WiFi device that I use for work. Currently I have four Laptop computers that connect through this device to the internet; however, I have another four devices that need to be able to connect to the internet and was wondering if there was anyway that I could connect a wireless router to the Telstra WiFi device to enable the extra devices to use the internet connection through the one mobile broadband device.



A:Can I connect a router to a Telstra Elite mobile Wi-Fi device

the features make note

Connects up to 5 Wi-Fi enabled devicesClick to expand...

which says it is acting like a router for itself. That allows you to attach a SWITCH
to one port and add your extra devices to the switch.

If you already have an extra router, connect a port from the Telstra Elite to a LAN port on the router (leave the WAN port empty).
You will also need to disable the DHCP service in the second router.
Relevancy 18.49%

HI all, i have this external hdd verbatim 2tb and it has been working fine for a while but all of the sudden it stopped working, i changed the power cable and it started working again but there is still a problem.

It won't show up in my computer and even the program KILLDISK says it isn't ready...
please i need help regarding this as fast as possible.

also in disk manager it say's not initialized and when i try to initialize it say's device not ready as well...

in device manager the hdd has the name USB device and nothing else, i've tried to reinstall the drivers, changing usb cable. I would love to format it but no program seem to see it as a HDD so please i need help...

thank you for reading

// mackesacke

A:HDD shows as "device not ready"


also there is not any valuable information on the disk either
Relevancy 21.07%

hi - i was just playing music on my dell latitude e4300 via bluetooth to a belkin bluetooth receiver connected to stereo.

somehow the connection got dropped - during a phone call on a land line. may be irrelevant.

now, i cannot get bluetooth connection back. there is no bluetooth icon in the system tray.

i cannot find 'bluetooth' devices in start>control panel> devices
--i have 2, and both ought to be there.

i unplugged bluetooth receiver, and had win 7 search for devices to add - no luck.

sure, i can reboot, and everything will probably come back.
but i am hoping for a better answer. i don't want to have to reboot every time the bluetooth connection gets lost.

i searched the web for a little, but only found unrelated posts, or posts with no answer. THANKS!

A:Bluetooth connection lost, icon gone from system tray, not in device manager

bluetooth light/icon on laptop, not screen is on; no bt

ok, i rebooted, thinking the bluetooth icon would again be in system tray, with the red in the middle, showing i have bluetooth capability, but that sound is not currently being directed to bluetooth.

no icon.

the dell laptop does have bluetooth icon illuminated on the laptop, just above the function keys - not on the screen at all / not in sys tray.

the bluetooth receiver is on, is working.

'add a device' is not finding this bt thingie.
Relevancy 21.93%

Well after reading quite lots of threads related to quot no audio output device is installed quot and trying No is installed audio output device different things and suggestions I am stuck with this problem The above message is shown under Vista and Win So I get this message in Vista and Win I have an acer aspire and the sound only works for a couple of minutes no matter what the operating system is - I tried Win Vista XPSP and XPSP and always installed the latest driver from the manufacturer site I also downloaded and installed the latest bios version No audio output device is installed for this laptop And still no sound I dismatled the laptop times to look at the motherboard and see if anything is OK There are no bad caps or burnt or anything I realized that after hardware reset the sound comes but only for - minutes at most Then the sound is cut out and after reboot the Realtek High definition audio disapeears from device manager My question is if the hardware is faulty is it possible to work No audio output device is installed after harware reset for a few minutes I also tried installing Backtrack and still the same So it s obviously not an operating sistem issue nor a bios one and not a driver either I tried different versions of driver Anyone could help me out nbsp

A:No audio output device is installed

Is this a New Acer, or have you had it for a while.
Many Acer's are not capable of being over-driven. They will become hot and sometimes fail when over-driven at high volume
If it is still under warranty, get it replaced or repaired, and hope you have not voided the warranty by doing your own internal examinations.
If out of warranty, it is possible you may need to replace the system board.
Now might be the time to have an experienced Acer tech take a gander at the innards.
Relevancy 21.07%

I have Windows seven alien ware on my pc and my g3 hauwei modem continues to give me the message error 31: a device attached to the system is not functioning. when i try to connect

A:Huawei 3G modem error 31: A device attached to the system is not responding

Error 31 means that Windows can't load the 3g modem driver. Are you running Windows 7 64-bit? What is the model number of the hauwei modem? Please be aware that there might not be a hauwei modem driver available for Windows 7...
Relevancy 21.93%

Suddenly one of my hdds dropped from windows it shows as failed in disc management and cant be reactivated from there Tho its seen in a bios boot and in device manager even says device is working properly When i checked bios i did it in ways with and w out bad hdd hooked up To hook it up i unplugged a working sata port - ST As- HDD BIOS device can't in but and manager it access seen GB and hooked problem HDD to that sata port when i rebooted into bios and checked what i seen on port was now ST AS- GB Does this seemingly point to fact this is the problem HDD being seen in bios now i decided to check Ie Device manager and it shows ata devices named ST AS so to assure myself i boot down HDD seen in BIOS and device manager but can't access it unhook problem drive and reboot now in device manager disc drives i see only one named ST AS when i re hook the problem hdd device manager shows both again So it appears device manager and bios see this HDD thats giving me nite mares i ve tried active undelete and BadCopy Pro But obv theyd fail as windows isnt seeing this drive As in my re search of last several weeks ive heard the SATA drive may be taking itself off line if Windows try to access it too much and that a sata usb bay cable s may sort me out here as im told some have had success when hooked in the traditional way a sata drive fails If this is possible i wont mind another purchase but the software has already set me back a fair bit PS ive seen the youtube video on swapping out the pcb but im also told matching a pcb is near impossible and it shows no physical damage i can see it seems a huge long shot its the pcb i also hear drive getting power and once or x i heard access noise Any further direction in this matter is appreciated Cheers nbsp
Relevancy 21.93%

When I remove my memory cards from the USB device, the computer shuts down in an orderly manner, as if I'd selected Shut Down from the start menu! It does not happen every time, but it is a pissoff when I'm working on something to have the computer shut itself down just because I removed a device. Also, it doesn't happen every single time.

I've looked around for answers on this and haven't gotten anything other than a mention to update my usb drivers, but i cant seem to find an individual usb driver package at all.

What can I do about this? It's too much.

A:Computer shuts down when I remove USB device!

I assume those memory cards appear in Windows as removable media (with drive letters assigned?)

Use the Safely Remove Hardware icon in your notification tray to notify Windows to stop all I/O to those "logical drives" (the memory cards) before you remove them
Relevancy 22.36%

I have a Toshiba Satellite L655D laptop computer. I've had it for over a year, so the warranty has expired. I have an error message stating "No bootable device, check cable connection. I know this is a hard drive problem. However, I placed a brand new, off the shelf, hard drive into the laptop and received the exact same error message. Does this mean I have a controller problem? And if so, how can I fix this myself without paying $300 or more at a shop?

A:No bootable device

Is the hard drive detected in the bios, if not the motherboard might be bad. I replace a lot of laptop motherboards
Relevancy 21.5%

Hello so this is the issue I have win vista x sp Toshiba satellite and a Seagate freeagent goflex tb external HD I had been using the external drive I/O hard external with error device for a while noticed some information wasnt really working properly I thought I would do a chkdsk However I used Tuneup utilities to perform the thorough chkdsk of my external HD i figured it would find and fix any bad clusters WRONG after hrs of waiting I restarted the PC I/O device error with external hard drive and now i cant access any information The external shows up in quot computer quot I can open certain folders but after a few mins I cant access anything and i get the I O device error ive tried running chkdsk r just from the PC in a CMD window It shows a list of - files I/O device error with external hard drive that are quot unreadable quot and sticks on a certain file at around complete every time Ive tried all of seagates suggestions and other then that everyone else just says to run chkdsk on other forums I really do not want to loose this information at all costs any information would be fantastic thanks for your help in advance nbsp

A:I/O device error with external hard drive

The Freeagent's power supply has probably failed
Relevancy 33.54%

I'm taking a class right now and the teacher keeps alluding to the fact that it doesn't matter how fast the CPU is. For example the CPU could be sitting there ideally. Could someone elaborate, is there no point in getting a faster CPU if the bus is too slow?

A:Why is CPU not as important as people think it is?

I don't really understand what he is suggesting. There are too many variables. What CPU? What is the bus speed? What applications are in question? What do you mean by

"For example the CPU could be sitting there ideally"
Relevancy 22.36%

Hi all, I have just joined TECHSPOT family

A:How to format a USB device?

Hi Madihlaba11 :wave:

Welcome to :grinthumb

You can read how to post a new thread in this Guide.

Before posting you should read all the Posting Guidelines.

To access technical support you may go to the Forums.

Many users like to post system specs in their Profile.

System Specs are always helpful when you seek support, (see the first two suggestions).
And helpers may ask that you post some of your specs in your thread.

You can access many other online TechSpot guides Here.

Enjoy your Stay
Relevancy 17.2%

I am very very frustrated since I waited a while to get this motherboard from china. My last DFI board randomly died on me and I ordered this as a replacement because I wanted a decent 775 board. I worked on it all night tonight and despite it reading all the hardware... it will not boot unless I reset the cmos every time. On top of that... I can not get the bios to update... it doesn't read any of the 5 usb drives I tried (fat/fat32). Also I tend to get this grey screen when trying to flash it sometimes. I am beside myself at this point after fussing with it for hours on end and I really need some help.

A:Asus P5E3 BIOS won't update and needs CMOS reset to boot every time

Sounds like either the BIOS is corrupted or the motherboard battery is a goner.

Have you tried burning the new BIOS to a bootable CD ?
Relevancy 19.35%

I am new to this forum and to posting tech questions online in general so hopefully I can describe what s going on accurately My computer has had no problems to iPod, External device) memory drives working (e.g. external not speak of lately I had not synced my iPod nano in some time maybe a month or two so I plugged it in yesterday to sync it I received the following message quot iTunes has detected an iPod that appears to be corrupted You may need to restore this iPod before it External drives (e.g. iPod, external memory device) not working can be used with External drives (e.g. iPod, external memory device) not working iTunes quot I have since discovered the problem has nothing to do with External drives (e.g. iPod, external memory device) not working the iPod itself The iPod plays all the music and podcasts that are currently on it just fine When I plug it into my girlfriend s computer her iTunes recognizes it just fine as my iPod and I was able to pull videos off of it I am now pretty certain the problem is with my USB drives I have an external memory drive that I use to back up documents - I had not used this in some time either Out of curiosity I plugged it in and it s not working either When I plug it in and turn it on nothing pops up and when I try to do certain actions to check on it like open My Computer the system freezes and I end up having to manually shut down the computer and restart I have gone through several threads on various forums and tried almost everything but nothing has resolved this issue Some threads suggested that plugging in certain devices can mess up your USB drives like this and a few weeks ago I did plug my girlfriend s printer into one of my USBs - I did get it to work but things were a little screwy with it so I m wondering if somehow that did something Other than that I can t think of anything else that has changed since the last time everything worked So far I have tried changing the drive letter on the iPod I have tried cleaning up my USB drives by using drivecleanup exe I have uninstalled and reinstalled the drives through Device Manager and I tried restoring my computer to a time when everything was working - none of this has fixed the problem and I m now at a loss Also FYI it s not easy for me to reinstall my operating system I have Windows XP Professional Service Pack because I purchased my computer from a custom dealer so I do not own my operating system CDs - they just load the OS onto the computer for you I can take it in to have it reinstalled but it costs and I just did that a few months ago so I really don t want to spend that much to do it again if it s not absolutely necessary especially since everything else on the computer is working fine I am hoping someone will have some insight on this and can help me out Any advice is welcome this has become extremely frustrating and time consuming Thanks Jon nbsp
Relevancy 22.36%

Hey I just formatted my computer and reinstalled windows xp
now i have no sound. It says no audio device.
Also when i click on the volume control, it says there are no active mixer devices
available. Then it gives me instruction on how to install it however it doesnt work.
Please help anybody....

A:No audio device


That happened to me too, but It happened randomly, just one day it didn't work (On XP Also) Try the motherboard drivers, otherwise just buy a cheap sound card. Get the drivers from the manufacturer website, with your computer model number - Like 533w or dv7

Good Luck, Brodie {Rudedog Racin}

EDIT: Check this out
Relevancy 21.5%

Hello Techspot,

on my PC I found some windows 7 professional 64 bit and 32 bit isos. These are from my friend who built my PC. I currently have a 32 bit. I would like to update to a 64 bit. I will be using a DVD-RW type DVD and my optical drive: BENQ DVD DD DW1640 ATA Device.

My question is, will the optical drive be capable of burning the iso to the DVD-RW?

The description of the optical drive from Speccy can be found in the attachment.


A:Burning Windows 7 64-bit ISO using Benq DVD DD DW1640 ATA device

Looks like it'll support both +RW & -RW. More importantly, what size is the ISO? I've only seen 4.7GB rewritable DVD. So if the ISO is bigger than that, then you'll have to burn it to a double layer DVD. Which looks like your drive will support also.

You have a retail version of Win7 or OEM? You might want to look into whether your existing key/license is still valid after you upgrade it to 64bit.
Relevancy 21.93%

I have a WD external USB 2.0 HD. Yesterday, there was a message on screen asking to update driver or something. I ignored it. Now, the HD is gone. It is not under device manager/disk drives. Everything under universal serial bus controllers works properly.

I downloaded HDD Scan and ran it. It did not find the drive. What can I do now?

A:External USB 2.0 HD not seen in device manager

Try this:

1. Uninstall your USB Mass Storage Device then Scan for Hardware Changes.
2. Clear your Mountpoint. You can use Autorun Protector (req .NET2.0) or delete all Mountpoints2 entries in regedit
3. Use DriveCleanup (posted by LookinAround)
Relevancy 21.5%

The audio on my Asus P E DELUXE WiFi-AP motherboard does not appear to work Windows says that there is no audio output device installed As on from Asus Win7, install device audio won't No drivers such when I plug my speakers in I get No audio device on Win7, drivers from Asus won't install no sound and the sound icon in the notification area continues to display a red circle with an quot x quot The High Definition Audio Controller is installed under Device Manager and appears to be normal However it is listed under System Devices There is no listing for Sound Video amp Game Controllers I am not sure if this is applicable to Win I have disabled and re-enabled the audio controller I have uninstalled it and let Windows reinstall it All to no avail For what it s worth the controller appears to be using a standard No audio device on Win7, drivers from Asus won't install Microsoft driver System info says that no sound devices are installed I have verified multiple times that onboard audio is enabled in the BIOS I have tried disabling the audio in the BIOS booting into Windows shutting down and then re-enabling the onboard audio No go I have attempted to reinstall the Soundmax drivers from ASUS They don t install I receive an error message saying that the audio driver files do not support my hardware I am sure that I am trying to install the correct drivers There is no software installed that would be interfering with the audio and all services look normal Any ideas nbsp

A:No audio device on Win7, drivers from Asus won't install


which speakers are you using and which driver?
because most of the speakers are plug n play...
Relevancy 17.63%

I am looking for a way to bring an old IBM desktop machine that I built Into more sutible working conditions. Does any one have any Ideas on how I can update the innerds of my computer?
I know this very vauge but I dont have the computer with me now and am looking to stock up on what I need (Info and parts) Before I get back to it.

A:Best way to update graphics on five-year-old IBM desktop

We heed to know the components you have before we can recommend upgrades. What is the IBM model number - or better a link to the IBM spec list for it - and what new components did you put in?

Also, what is your budget and how do you use the PC?

For a starter on learning about video card upgrades, I recommend this site:

Pay particular attention to the criteria page that addresses system constraints in the upgrade process - and helps you define your wants and needs in a way that is useful:
Relevancy 19.35%

which i have yet to find a solution to after four hours of scouring the tubes i finally got all the pieces of my new computer together new HW msi mainboard k n pgm -v amd athlon II x mb RAM nvidia geforce gt x sata LG multi drive x sata gb drive not new but unused old HW x IDE gb drives x IDE cd r w the old hw works fine when plugged into my old computer boots etc never had any issues with them at all except the cd drive sticks sometimes i ve set jumpers correctly all cables are seated properly both the SATA HD and the SATA multi-drive power up and seem to work correctly as do both IDE drives and the IDE disk drive the BIOS recognizes all components installed and i ve set my boot sequence to boot "Reboot and select boot error proper device" from only the IDE disk drive and in another attempt only the SATA disk drive still get the same error i ve connected the old HD with the old XP os installed on it and it gives me boot options you know safe mode w or w o command prompt etc or start windows normally but obviously as the OS was installed with another MB gfx "Reboot and select proper boot device" error card etc it would blue screen on me and reboot the computer the manufacturer screen for the mainboard appears normally any "Reboot and select proper boot device" error combination of IDE or SATA HD s has been tried the only thing i haven t tried that i have seen on the web is removing the video card but i fail to see where that would affect the computers ability to recognize the CD in the disk drive Also the only copy of windows xp pro I have at "Reboot and select proper boot device" error the moment is a burned copy i have a product key set for my new computer and i have used this same copy to install onto my younger siblings computer and had no problems at all now if I am completely ignorant to a fact like part or most of my computer will not run XP please forgive me but it seems like even if that were the case the computer would still try and boot with the CD inserted any help at all would be greatly appreciated and thank you for taking the time to help me out snuffXdub nbsp
Relevancy 22.36%

I replaced my cpu, and ram, and my computer boots up fine, but it keeps saying new hardware found, and brings up the install wizard for PCI device. When I check my hardware, under device manager, all PCI devices have a ? beside them, and none of my USB ports will work. Any suggestions?

A:PCI device problem

Try running Windows Update and let it detect your hardware and offer you suitable drivers.
Relevancy 19.35%

This is apparently a common problem with no single answer. Regardless of whether any USB is plugged in or not, the system will give this error after POST. I can't get it to go to BIOS, pressing Delete at the mobo screen does nothing.

A:Asus motherboard "USB Device Over Current Status Detected"

I just did a search for this error and I see what you mean, there are dozens of different solutions. Had you made any changes just before this occured?

I think the best place to start is to begin by disconnecting everything from the mobo apart from one memory stick and the monitor. This includes disconnecting the hard drive/s, CD drive/s, keyboard, mouse speakers, printer, any USB device and unplugging the cable that goes to the front USB connections (if you have any) any cards including graphics (unless you have no onboard graphics to connect to the monitor) and any card readers or floppy drives. Then try to boot and see if you get the post screen or that error again.

Let me know what happens.
Relevancy 18.06%

After doing some research...(I feel fairly stupid) I have figured out that a Ati Radeon Hd 5400 Series graphics card, is not the best for gaming. I got this PC for Christmas from iBuypower. Here are my specs:

CPU AMD Athlon II X2 250
CPU Speed 3.00 Ghz
Motherboard Manufacturer Gigabyte Technology Co.
Motherboard Model GA-770T-USB3
Ram 4 Gigabytes
Power Supply MaxPower PX-480 (480w)

And I am from the US.
Thx to cfitzarl for the guide to opening a new thread.
BTW I play games like WOW and Rift soon to be Magicka.