Windows Support Forum

Logitech mouse/kb must reinstall drivers after reboot

Q: Logitech mouse/kb must reinstall drivers after reboot

Hello geeks and gurus I'm using a Logitech DiNovo Media Desktop a mouse keyboard combo connected with bluetooth to my computer I have installed the latest drivers and Logitech Setpoint software Setpoint installation uses my computers internal bluetooth so the included bluetooth dongle is not connected Mouse and keyboard work fine and without any problems until I Logitech reinstall drivers reboot mouse/kb after must reboot After reboot both mouse and kb refuse to connect Logitech Bluetooth Connection Assistant finds them but refuses to connect Waking up sleep or hibernate causes no problems mouse and kb connect and work This issue occurs only after reboot every time I have found a workaround but it is PITA If I disconnect all USB devices two HD's DVD and Blue-Ray before booting mouse and kb are Logitech mouse/kb must reinstall drivers after reboot still not working but the Logitech Bluetooth Connection Assistant application finds them and reinstalls the drivers After that I Logitech mouse/kb must reinstall drivers after reboot can connect mouse and kb and only after that the disconnected USB devices It takes an extra to minutes every time I reboot Luckily I normally hibernate instead of shutting down but for example after installing updates I have to reboot And the circus begins Short version it seems I'm loosing drivers for my bluetooth mouse and kb every time I shut down the machine I am not able to reinstall drivers if any external USB device is connected Any ideas Kari

Relevancy 100%
Preferred Solution: Logitech mouse/kb must reinstall drivers after reboot

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Logitech mouse/kb must reinstall drivers after reboot

Any RF nearby (wireless router, monitor) that could be interferring with the Bluetooth?

Doesn't Logitech have the keyboard and mouse go into sleep mode in order to conserve battery life when the system is off? Can you change that?

http://www.sevenforums.com/hardware-devices/38125-logitech-mouse-kb-must-reinstall-drivers-after-reboot.html
Relevancy 21.5%

After going through lots of programs and cleaning out an infection, I restarted it and it is almost totally unusable. I can confirm that both mouse and keyboard work, mouse light is on, and keyboard lets me open the calculator. Any help please? Thanks.
 

A:Can't move my mouse, but computer is not frozen

If the mouse is USB (not a PS/2 connection), try disconnecting and then reconnecting. You could also try a different USB port for the mouse.
 

http://www.techspot.com/community/topics/cant-move-my-mouse-but-computer-is-not-frozen.183253/
Relevancy 20.64%

Following yesterday's worldwide launch of Windows 10, all three major GPU vendors have released new graphics drivers that support Microsoft's new operating system. If you're upgrading to Windows 10, make sure you download and install these drivers soon after launch. ...

Read more
 

A:AMD, Nvidia and Intel release new GPU drivers for Windows 10

Is AMD planning to release Windows 10 drivers for RadeonHD234k cards too? Are those machines stuck with Windows 7?
 

http://www.techspot.com/community/topics/amd-nvidia-and-intel-release-new-gpu-drivers-for-windows-10.217386/
Relevancy 28.81%

Logitech has unveiled a new high-end gaming keyboard equipped with the company's own Romer-G mechanical switches. Officially known as the Logitech G310 Atlas Dawn Compact Mechanical Gaming Keyboard, it appears to be a direct descendant of the G910 Orion Spark...

Read more
 

A:Logitech G announces G310 Atlas Dawn mechanical gaming keyboard with in-house Romer-G switches

Has a great design.
 

http://www.techspot.com/community/topics/logitech-g-announces-g310-atlas-dawn-mechanical-gaming-keyboard-with-in-house-romer-g-switches.216921/
Relevancy 21.5%

I want to buy a new gaming mouse and these are the three mice that I have for the same price-g9x , g402 and CM Mizar for 40$.please suggest me the better one and please tell why too.does g402 have no acceleration and is it the fastest mouse and is its sensor as good as g502.please reply quickly.please suggest any mouse if you consider some other mouse better for the same price.
thanks in advance
 

http://www.techspot.com/community/topics/which-is-better-gaming-mouse-g9x-vs-g402-vs-cm-mizar-for-40.216922/
Relevancy 30.1%

Logitech has decided that it's sick of their old, outdated brand, today launching a new look for the company that will supposedly place "design at the core" of its products, while building on its "hertiage as a technology company". ...

Read more
 

A:Logitech to focus on design, starting with a brand new logo

Nothing wrong with the logo, except the "g" that is hurting my brain.
 

http://www.techspot.com/community/topics/logitech-to-focus-on-design-starting-with-a-brand-new-logo.216342/
Relevancy 21.07%

I have a Gateway NE56R34u Laptop, I tried to check the drivers in device manager and it seems that everything has been installed properly or no missing drivers found but when I tried to check some of my hardware in DXDIAG showing N/A for (operating system, processor video etc.) I also tried to update it or uninstall the driver but still the same help me out please thank you
 

A:Have drivers but showing in DXDIAG N/A

I also uploaded some information so atleast it will be easier for some to determine my issue thank you
 

http://www.techspot.com/community/topics/have-drivers-but-showing-in-dxdiag-n-a.215501/
Relevancy 21.07%

In dxdiag option and in Display option all 3 acceleration options are not available in my pc. But I had installed the drivers and hardware for graphics then too it showing not available. Can anybody tell me how can I enable all those 3 options. I have Standard VGA Graphics Adaper.
Here is screenshot for reference -

 

A:Display Drivers Not Available

And Only Because Of That I am not able to open any game or sofware which requires display graphics. Any suggestions are most welcomed.
 

http://www.techspot.com/community/topics/display-drivers-not-available.214649/
Relevancy 24.94%

A warm reboot restarts a computer without loss of power to the motherboard. If it's a forced reboot (not sure this is the right way to call it), that is: a reboot produced by a kernel panic, BSOD or by pressing the reset button, what happens to memory?.

During a warm reboot (for example the reboot produced by a BSD, kernel panic or pressing the reset button): is the RAM emptied then refilled again?. I say because, since the motherboard isn't powered off in any moment, does the RAM keep data?. I heard that sometimes it's necessary to actually do a cold reboot to clear memory after a warm boot.
 

A:Is RAM cleared after a warm reboot?

BOOT never clears ram - - while hibernate and shutdown can be so configured.
This is a security exposure if/only if the intruder has physical access to the machine, strips the chips from the box and proceeds to examine the content.

Consider what you know of the difference between HD Quick Format and a Low Level format.

Quick format only writes the free and allocated lists and gives up, assuming the actual sectors are present from the initial Low Level
A Low Level fmt, writes every block in the partition with a sector number, rereads it to verify and if bad, places that sector on the bad list.
Boot does as little memory management as possible - - akin to the hd quick fmt.

Your concern that leftover information in memory contaminates the boot process implies that memory IS being read without ever being written first - - Not during boot!

Just to complete this saga, there is a software bug known as Use After Free, where

a program allocates a block of memory for dynamic use,

saves the pointer to it,
uses it for awhile, usuallin in subroutines

and then gives it back but,
forgets to zero the pointer to it, and being non-zero,then attempts to reuse that same block again. Frequently that block is in-use elsewhere.

Use After Free is nasty to find and the consequences are indeterminable - - corruption of data and/or program failure are typical.
 

http://www.techspot.com/community/topics/is-ram-cleared-after-a-warm-reboot.213870/
Relevancy 21.5%

Hi I would appreciate if someone could help me please The problem I have has been going on since about the time I formatted my PC and reinstalled Windows Had issues with BSOD on install because of my graphics card seem to have been slighty dislogded See http www techspot com vb topic html Okey the problem is my mouse keeps freezing up after a while and after moving it or clicking a couple times it works again When this happens I get either a beep or the usb disconnect connect sound depending on which mouse is being used Current using Windows mouse issues freezing 7 Bluetooth Apple Magic Mouse connecting to a generic Windows 7 mouse freezing issues bluetooth dongle this makes a beep when Windows 7 mouse freezing issues it freezes The USB Wireless Logitech Dongle Logitech Mouse I had before this made disconnect connect sound The USB Wired Mouse before the Logitech also made disconnect connect sound I have tried to work around this using several methods but have had no luck Steps taken to try and rectify issue Changed mouse I am on my th mouse now I will not change for another again the mouse is not the problem Tried all the mouses on other computers where they all worked fine I have switched ports on numerous occasions all other device work with no problem keyboard touch screen monitor external hard drive s usb flash I have removed conflicting hardware and ensured only on mouse is plugged in also removed touchscreen cable from monitor I have gone to Device Manager and set USB Root Hub and Power Management tab and unchecked quot Allow the computer to turn off this device to save power quot on all devices I have removed drivers for all other mouse s used previously I have disabled C E as this uses some power saving methods I have check Event Viewer which only has networking errors which all forward to my network drive I have run System File Checker SFC sfc scannow I need to know whether Windows is the issue or whether its the usb ports Can anyone please help me as it is now really bothering me I can t even play Battlefield games Thanks nbsp

A:Windows 7 mouse freezing issues

This is a problem I have not seen before. Try using this guide to find any other mouse drivers that you may not have deleted.

http://www.howtogeek.com/howto/windows-vista/remove-old-drivers-after-upgrading-to-new-hardware/
 

http://www.techspot.com/community/topics/windows-7-mouse-freezing-issues.164226/
Relevancy 20.21%

AMD has finally released a new set of Catalyst beta drivers for Radeon graphics cards, promising performance improvements in two recently-released PC titles: The Witcher 3: Wild Hunt, and Project Cars.

Read more
 

A:AMD releases Catalyst 15.5 beta drivers for The Witcher 3, Project Cars

I dont know why but after 14.4, every driver is causing BSOD and restarts randomly on my R9 290
 

http://www.techspot.com/community/topics/amd-releases-catalyst-15-5-beta-drivers-for-the-witcher-3-project-cars.213498/
Relevancy 19.78%

AMD graphics card owners that have tried playing The Witcher 3: Wild Hunt or Project Cars are likely already aware of the fact that both titles run like crap on Radeon hardware. There's a ton of controversy surrounding what did...

Read more
 

A:AMD is working on Catalyst beta drivers for 'The Witcher 3: Wild Hunt' and 'Project Cars'

"AMD graphics card owners that have tried playing The Witcher 3: Wild Hunt or Project Cars are likely already aware of the fact that both titles run like crap on Radeon hardware."

At the risk of pointing out the obvious, "runs like crap" doesn't strike me as professional an expression as "runs terribly" or "are both exceptionally poor performers on..." It may convey the sentiments of the accompanying article comments, but those are supposed to be crude.
 

http://www.techspot.com/community/topics/amd-is-working-on-catalyst-beta-drivers-for-the-witcher-3-wild-hunt-and-project-cars.213323/
Relevancy 20.21%

Ahead of tomorrow's launch of The Witcher 3: Wild Hunt, Nvidia has released a new GeForce graphics card driver that's Game Ready for the open-world action RPG. The GeForce 352.86 drivers are also WHQL certified, meaning they are stable enough for everyday...

Read more
 

A:Nvidia releases new GeForce WHQL drivers for The Witcher 3, Windows 10

Mine were updated hours ago, you just can't beat GFE for this sort of thing (or for game display settings optimisation as far as I'm concerned, it works for me).
 

http://www.techspot.com/community/topics/nvidia-releases-new-geforce-whql-drivers-for-the-witcher-3-windows-10.213202/
Relevancy 21.5%

Anyone that spends a considerable amount of time in front of a monitor can attest that finding the right mouse is a must. While there are plenty of boxes to tick when searching for a suitable pointer, for me, it...

Read more
 

A:Weekend Open Forum: What kind of mouse do you use?

Roccat Kone XTD (laser). It's the best mouse I've had so far. My Death Adder has been demoted to closet duty.
 

http://www.techspot.com/community/topics/weekend-open-forum-what-kind-of-mouse-do-you-use.212356/
Relevancy 21.07%

Neither my keyboard or mouse are working on any of the 7 USB ports on my computer. My mouse was initially working, but I read somewhere if you delete the keyboard drivers you can reinstall them and it will work again. BUT when I was doing that I stupidly uninstalled my mouse driver so now NOTHING works. I can't try if it works in safe mode because my keyboard doesn't respond when I hit f12 during boot up.

When I plug in the mouse or keyboard, I get a window that pops up asking if I want to install the hardware, but it's impossible for me to do anything because my mouse and keyboard don't work! If anyone has any ideas I would greatly appreciate the help. Thanks!
 

A:My Dell Demension e510's (Window's XP) keyboard and mouse don't work

First I would try to find a different working keyboard because you should at less be able to boot into safe mode because the drivers don't even load until windows start loading.
 

http://www.techspot.com/community/topics/my-dell-demension-e510s-windows-xp-keyboard-and-mouse-dont-work.211116/
Relevancy 21.5%

When I say gaming I mean 5-button. I like those forward-backward buttons and I rely on them heavily. I'd prefer something ergonomic, but if my budget is too low then what the heck. I've had a 10 TeckNet mouse for the past 2 years and it's been okay, just not the greatest position for my fingers, which hurt after prolonged use. I am, of course, right-handed.

Right now my best bet is to get the MSI Interceptor DS100.
 

http://www.techspot.com/community/topics/i-need-good-cheap-gaming-mouse-%C2%A310-20.210953/
Relevancy 52.46%

Many manufacturers have developed a touch-first approach to input devices, spurred by the rapidly evolving mobile revolution. Such methods work great on select devices but when it comes time to do some serious work, nothing has yet replaced the trusty...

Read more
 

A:Logitech's new MX Master Wireless Mouse said to be its best yet

Too bad they don't mention a left handed version.
 

http://www.techspot.com/community/topics/logitechs-new-mx-master-wireless-mouse-said-to-be-its-best-yet.210722/
Relevancy 21.5%

For reference I have a Lenovo Y P IdeaPad laptop I can list additional specs if needed although I m not sure if it s necessary or not Anyways so I ve always been using a wireless USB mouse with my laptop and I ve had no problems with it up until a few days ago I was using a simple Logitech wireless USB mouse the kind that was no more than USD Well about a week ago I found out the battery was dying and I had to replace them but I waited a few days until I noticed a weird quot lag quot in my movements of the mouse Sometimes the mouse would occasionally lag behind my movements - say if I move my mouse in Moving lag mouse noise static causes and rapid movements it Moving mouse causes lag and static noise would show onscreen of much slower movements So I replaced the battery and reset the mouse To no success I still had the same issue except I realized I was unable to Moving mouse causes lag and static noise move the mouse while streaming YouTube videos or playing games or it would cause severe lag on both the slower mouse movements and either the YouTube video would stutter lag or the game would lag also causing this static-y sound to appear whenever it was lagging behind So earlier today I picked up a new wireless mouse this time a Microsoft one for about USD Let me just say that I have never had issues where I had to replace a mouse except maybe once every months to a year for other minor reasons So I installed a new battery installed the new mouse into the laptop and I am still getting the same issues Sorry if this is long but I am not extremely tech savvy in this wireless mouse department lol I have looked all over the Internet and couldn t find anything that fixed the solution for me I have Windows by the way Also if it matters I recently installed Norton Security after my subscription was close to ending and I also installed an older version of Direct X as well as install CCleaner I don t think these problems affected this but still I also scanned my laptop for viruses and I am told by Norton that I do not have any viruses or anything Finally I tried to go into Device Manager and uninstall the USB wireless mouse drivers and reinstalled them to no luck The only temporary solution I have as of now is to take out the USB for five seconds and put it back in but that solution only works for about minutes until it goes back to normal Also if anyone knows any solutions try to make a step by step process or something because I have trouble finding certain things on my computer as it is lol Thanks in advance nbsp

A:Moving mouse causes lag and static noise

My fairly new Acer R14 has the exact same problem and can't find a solution anywhere. I'm using both a USB mouse and keyboard (not wireless), and I also happened to fix it momentarily by unplugging them.

Some guy fixed a similar problem by taking off the microphone boost.
Got to Control Panel > Sound > Recording > Properties > Levels > Microphone Boost.
Maybe you'll have better luck than me.

I'm a noob with computers so I don't know if this matters but I downloaded a game that runs on DirectX 9, to which I understand the computer already comes with DirectX, but I don't know if it downloaded something extra for an older version. Also can't uninstall it.

Sorry for not being so helpful.
 

http://www.techspot.com/community/topics/moving-mouse-causes-lag-and-static-noise.210051/
Relevancy 31.82%

I recently bought a Logitech G502 left gaming mouse and noticed a serious problem. The right click is completely locked and unable to click, not as if it doesn't read it. The button is unmovable. Does anyone know what it could be?


 

A:Logitech g502

I meant left, excuse me
 

http://www.techspot.com/community/topics/logitech-g502.210082/
Relevancy 51.6%

Hi all So I got G today from an online webstore today I ve been using a super old button logitech back-up mouse since my G died I ll describe my procces thus far Plugged in G when computer was on No sign of life windows tries to install a driver fails Device manager lists the G under Other devices with a yellow triange telling me no driver is installed Then went to logitech com to download the drivers and support software LGS LGS being the Logitech Gaming Software utillity that is the only downloadable support from logitech com fails to recognize my mouse just the G keyboard I Logitech issues G502 connection/recognition mouse have Tried the troubleshooting option of rebooting and re-installing the LGS no dice However the G does light up during booting up Booted the computer with the backup mouse unplugged and the G plugged in It works cursor movement left right click no advanced buttons for - mins before going back Logitech G502 mouse connection/recognition issues to the Device fail to install and the Device Manager placing it under other devices etc Plugged my backup back in tried manually updating drivers in the Device manager selecting it as a Mice and other pointing devices type of device and choosing the drivers from LGS drivers LGSHidFilter tried all subfolders of drivers but this one was the only one that held any inf files the Device Logitech G502 mouse connection/recognition issues manager recognised as a good drivers Selected the g driver No G driver was listed only a G s It tried to install but gave the error Device could not start code After reading threads in the logitech forum tried the FWUpdate a firmware update for the g option but installer tells me to connect my mouse before proceeding Even though my mouse IS plugged in Plugging it in and out doesnt help As for now im at my wits end I even tried borrowing someones g mouse and encoutered much the same issues All I can think of is to race from booting up with just the G plugged in to either the FWUpdate or the manual install from the device manager and see if the install goes through when it still works Seems rather unlikely and a silly way to go about things I hope anyone with similar issues can help me out any advice is super appreciated P S oh using Win ultimate bit nbsp

A:Logitech G502 mouse connection/recognition issues

I just fixed this exact problem on my Win7 Media Center x64. It's a bit convoluted, but the core of the issue is Windows not recognizing the device type properly. What you have to do is open up Device Manager and assign the drivers for Windows. This should fix the mouse.

Head into Device Manager and click View up top. Choose Devices by Connection. You'll see why in a second.
Expand the top entry until you find a PCI Bus. Expand that, then expand all the USB Host Controllers. One of them should have an entry for G502 Gaming Mouse under it.
Right click it and select Update Driver Software, then Browse My Computer for Driver Software. Now click "Let me pick from a list of device drivers on my computer."
Go down to USB Devices and install it as a USB Composite Device. The mouse should light up. Nice! It still doesn't work, though.
Now there'll be two more entries underneath the USB Composite Device, both of which should be G502 Gaming Mouse. Right click one and go back to the list of device drivers. This time go to Human Interface Devices and select USB Input Device for each of them. A bunch of new devices should populate beneath each USB Input Device, one of which should be HID-Compliant Mouse. Your mouse should now work!
 

http://www.techspot.com/community/topics/logitech-g502-mouse-connection-recognition-issues.205348/
Relevancy 21.93%

Hello everyone!
I'm having issues with my computer..my mouse seems to randomly move on its own. It doesn't happen all the time, It's rare for it to occur outside a video game. When I'm playing it will do and move to the exact same place everytime. It press buttons and move the mouse to one corner of the screen
this may happen 2-3 times within a 40 minute game.
Anti malwarebytes can't find it, I tried cc cleaning, my mouse is brand new and has been working beautifully until just this week.

I'd be grateful for any help or advice

-Knox.
 

A:Mouse moves on it's own

Have you tried any other mice?
 

http://www.techspot.com/community/topics/mouse-moves-on-its-own.190392/
Relevancy 21.5%

Hello, lately I've been having the strangest of problems:
My mouse doesn't work as it should - sometimes clicking on something doesn't do anything, sometimes it does something different, as if some altering keys were pressed - eg sometimes clicking on a tab in a browser will close it (with left mouse button).
I have tried to locate and update new drivers for my keyboard and mouse, since these are my guesses for what could be causing this, but couldn't find any driver for the keyboard and the driver for the mouse didn't change anything.

My mouse : Trust MI-6970C Laser Mouse
My keyboard: Genius KB-G265
I'm running Win 7 Professional

I can't think of any changes that I did at the time this started happening, so I'm really at loss.
Thank you for any advice on this.
 

A:Mouse and Keyboard acting strange

Try them with another computer. If they both work OK suspect either a hardware problem with your computer or a possible malware infection. It could also conceivably be a Windows problem but the other two possibilities are more likely.
 

http://www.techspot.com/community/topics/mouse-and-keyboard-acting-strange.208308/
Relevancy 21.93%

ALL I did was replace the almost dead batteries & now its a pita to click on something.
Its like the cursor is on ice, I move it up to click on a bookmark & it slides on by & I have to s l o w l y move it into the area.Its a wireless Microsoft mouse.
 

A:Odd wireless mouse behavior

Open Mouse by clicking the Start button , clicking Control Panel, clicking Hardware, and then clicking Mouse.
Click the Pointer Options tab, and then do any of the following: To change the speed at which the mouse pointer moves, move the Select a pointer speed slider towards Slow or Fast.
 

http://www.techspot.com/community/topics/odd-wireless-mouse-behavior.208493/
Relevancy 21.93%

My usb mouse is connected, it's led is on, but it's not moving the cursor at all.
I tried unplugging and plugging it in every usb port I have but still not working.
Strangely keyboard 100% works and usb drive works too
Help me.....
I tried another mice that's 100% working on my other computers and they all won't work.
What should I do?
 

A:Mouse problem

I would have a look in 'Device Manager' at the line 'Mice and other pointing devices'
Click the small arrow to the left of that line, to get the next line to show, below it.
Right click on that, and choose either 'update driver' or 'Uninstall' and then reboot your pc, with the mouse connected, and Windows should install the driver for it again.
I'm assuming this is a Microsoft mouse, if another type it might need it's own driver which should have been supplied with it, but it would be very unusual not to work in Windows at all, whatever the maker.
 

http://www.techspot.com/community/topics/mouse-problem.206868/
Relevancy 21.5%

Hello guys..I have a same a problem..I cant play any of my mouse in my laptop..can u help me to fix it..thank you so much.

Moderator note: Moved from this thread: http://www.techspot.com/community/t...t-computer-is-not-frozen.183253/#post-1430301
 

A:Can't move my mouse, but computer is not frozen

You can't use any USB mice in your laptop? How many have you tried?
 

http://www.techspot.com/community/topics/cant-move-my-mouse-but-computer-is-not-frozen.205615/
Relevancy 21.93%

Hi! I usually post over in the malware/viruses section, but I don't ...think this is virus/malware related? That is, my mouse has recently (within the past week or so) decided that it's going to start double-clicking, which is something of an irritation when dragging/dropping things, or when playing video games of any kind, mostly. I don't think this is malware/virus related, since I've run my malwarebytes/MSE scans and found nothing; I've even run malwarebyte's anti-rootkit to see if it was just something strange going on there, and found nothing, too.

My mouse is a few - about six? - months old, and it doesn't really have any issues aside from this, nor have I had any problems with it before now. It's an E-blue Cobra mouse, and googling doesn't seem to be terribly helpful as far as "Go ___ for new/updated drivers!", so I'm sort of stuck on that front, too.

Anyone have any suggestions/fixes they know of that might help?
 

A:Double-clicking mouse

Have you check in the control pane. Under folder options? Once you click on this and the window opens. Look for ( Click Items as follows) Here it will give you the option to single click on Items or double click. You should be able to change your settings there.
 

http://www.techspot.com/community/topics/double-clicking-mouse.203828/
Relevancy 21.5%

I'm looking for a decent ergonomic mouse to help take stress off my wrists while they heal and I'm wondering if anyone has any recommendations. Ergonomic keyboards are also on my list, but I will be unable to get them at the same time. I'm willing to go near $40 for one if that's necessary for a decent one, but I can't get them both at the same time due to a strict budget. I'd be happy if anyone could help me out. My only exclusions would be something being shipped directly from china Thanks
 

A:Recommended Ergonomic Mouse and Keyboards?

I like the Logitech Wave keyboard and mouse combo. Together, they go for $50. The MS ergonomic keyboard also seems fine looking at the reviews, but I haven't tried it personally. I would google, "Best Ergonomic mouse and Keyboards" and see what they recommend.
 

http://www.techspot.com/community/topics/recommended-ergonomic-mouse-and-keyboards.203640/
Relevancy 21.93%

I am unable tomove my PS2 mouse. I tried reebooting my pc by plugging and unplugging my mouse but it doesn't work. my device manager is not listing the mouse option.
 

A:My mouse is frozen

Have you tried using a different mouse to see if the mouse is the problem? How about trying a USB mouse to see if that works? You say you tried re-booting the pc by unplugging and plugging in the mouse, does this mean that you simply unplugged the mouse or did you actually try shutting down the computer and re-starting it (the proper way through your Operating System)?
 

http://www.techspot.com/community/topics/my-mouse-is-frozen.203602/
Relevancy 31.82%

Some time way back I had a thread going about problems I had with it. Well, to make a loooong story short, I just took them out of the closet & reconnected everything & whatever the sound problem I had, its gone .
I'm wondeing if anybody else in here has the same ones http://www.logitech.com/en-roeu/support/x-530 & might know why two of the speakers don't work. I know I've had it cranked quite loud, but that shouldn't matter. TIA







This bottom picture is not mine, its just a similiar one I googled
 

A:Logitech X-530 re visited

Are they connected to a different computer. Then when you first tried.
 

http://www.techspot.com/community/topics/logitech-x-530-re-visited.203539/
Relevancy 21.5%

Replaced the mobo (Gigabyte GA-78LMT-USB3), CPU (AMD FX-4300 Vishera), and RAM (G-Skill RipJaws 4MBx2) in an older system running WinXP (planning to upgrade to Win7 ASAP). Everything booted up just fine, but the HP keyboard and the Logitech mouse, both of which which work fine on another computer, aren't being recognized at all by the computer. No error messages, just not working. Not even lighting up. We've tried every USB port on the system, and even used a USB-PS/2 adapter to try it that way, to no avail. I'm out of things to try. My only thoughts:

1. Could USB be disabled in BIOS by default? If so, how do I change that without a keyboard and mouse, when I can't even access the BIOS?

2, Could the USB system on the new motherboard be defective? How do I test that?

3. Is there any possibility at all that it's related to the Antec 500W PSU--perhaps not enough wattage for this system? (Hard drives are all pretty old.)
 

A:USB keyboard and mouse not working after upgrade

Create and boot from a Knoppix Live CD (just google to find and download the ISO). If USB still doesn't work when you boot from knoppix, you know it must be either hardware or BIOS issue.
 

http://www.techspot.com/community/topics/usb-keyboard-and-mouse-not-working-after-upgrade.203285/
Relevancy 21.93%

Hi there,

My mouse cursor freezes once every ~30s for about 1~2s. It doesn't happen all the time, but I suspect it might happen because of the usage of postgreSQL, as I've seen 2 other people with the same problem who also used it.

I have tested another mouse, the problem persists. I've tried updating mouse/USB drivers as well, nothing helped.

My trackpad, however, doesn't stop working at any time.
Any ideas?

Thanks.
 

A:Mouse cursor freezing

Interesting how when you tested another mouse the issue persisted, but it works with the trackpad. Are both mice you tried (non-trackpad) wired or wireless?
 

http://www.techspot.com/community/topics/mouse-cursor-freezing.203256/
Relevancy 21.93%

I just got a new system that is rather light on the USB ports, so I figured I'd take advantage of the built in bluetooth. That being said are there any bluetooth mice that the users of Techspot either own and like, or find appealing? I tend to like my mice full sized and being contoured for the right hand is a bonus.
 

http://www.techspot.com/community/topics/suggestions-for-a-bluetooth-mouse.203145/
Relevancy 21.93%

I was thinking of getting a used death adder off ebay. Are their any new mice for 30$ as good as a death adder? With 2 side buttons?

I was looking on newegg but most mice don't tell you their response time, death adder has 1 ms. idk it seems like if I am not buying razor I am gettting crap.

How about 60$?
 

A:Gaming mouse for $30?

A lot of razer mice are pretty junkie to be honest.
There are many deathadder and razer fakes in general on ebay, so look into it, it's very common (for new ones). Obviously used ones could just as well be fake, and the seller may not even know it.
The fakes are not bad though I hear.

Most mice can support a polling rate of 1000hz.

Some good mice with good sensors in that price range are Razer Abyssus, Logitech G100s, Roccat Savu, Zowie Mico, and CM Storm Spawn.
Most of those mice use the Avago 3090 with a fairly well implemented ROM AFAIK, but I don't have any myself except the Abyssus.
AFAIK the polling rate on all these mice can be set to 1000hz except the G100s, which is 500hz max.

Sorry there aren't a lot of side buttons available at $30, but the mice I listed above have top performing sensors for a good price.
 

http://www.techspot.com/community/topics/gaming-mouse-for-30.202878/
Relevancy 30.96%

Hey,

As the title suggests, those two pieces of hardware are heavily conflicting. I don't know whether I'm just doing it wrong, or maybe it's a broken key, conflicting softwares, I don't know. The problem is that whenever I use caps lock (or any other key bound to caps lock), my headset disconnects and reconnects, then disconnects again and reconnects again, and so on.

For now, I have disabled the entire caps lock key, but sometime in the future I would like to be able to use it again. I have updated both Synapse 2.0 and Logitech Gaming Software. I can't find any similar issues on the internet, so I'm wondering if it's just a broken key in the keyboard and if this is fixable in some way that's not sending it back?

Any help on this issue is appreciated, otherwise I'm just going to RMA it and get another keyboard entirely.

Thanks!
~Marty
 

A:Razer BlackWidow and Logitech G35 conflicting

That is very odd, it sounds to me like there is a problem with the specific keyboard. Now im guessing this has happened multiple times so thats why you know it is the caps lock key causing this.

If your sure thats the problem, I would return the keyboard for a new one because I can't think of a way to fix something happening like that.
 

http://www.techspot.com/community/topics/razer-blackwidow-and-logitech-g35-conflicting.201936/
Relevancy 21.5%

I have a toshiba satellite pro and usually use the touchpad with my right hand rather than a mouse. I attached an external mouse for my daughter to use, and changed the settings to lefthanded. I disconnected and shut down. Since then, each time I restart the computer, the touchpad does not work correctly. Instead of double clicking on the touchpad, I have to rightclick. I have to go into mouse settings on control panel, and move the double click speed, click apply and then the touchpad works correctly then. Why is this? Please help.
 

http://www.techspot.com/community/topics/touchpad-problems-after-using-left-handed-mouse.201828/
Relevancy 21.5%

Hi mouse and responding after Keyboard not bootup Its been a while since I last posted here boy has this site changed I generally know how to fix my pc problems when they arise and if I dont google has been my friend but I have ran into something that has me banging my head on the desk My pc that I built just over a year ago or so has been running smoothly until today I woke up from a nap and booted up my pc and neither my mouse or my keyboard would respond My microphone is also plugged in via USB the light on that is on as with my caps lock key on my keyboard but my mouse light will not turn on after I tried unplugging and replugging it Please note Keyboard and mouse not responding after bootup I am unable to enter bios since I cannot get my keyboard working I also am not able to run in safe mode because that also requires keystrokes Keyboard and mouse are in good working order as I am using them now on my Keyboard and mouse not responding after bootup secondary PC one that got replaced to type out this thread I took these steps unplugging the USB connections and re-plugging them back in - no results - restarted pc - no results unplugging the USB connections and re-plugging them back in in different locations - no results Keyboard and mouse not responding after bootup - restarted pc - no results unplugging USB mouse and used the USB to PS adapter to plug it back in via PS - no results - restarted pc - no results So now that I am unable to get into bios or safe mode what are my options I was thinking of just trying to re-install windows but only as a last resort Thanks in advance I dont think my current system specs are needed to help fix this issue but I will include them just in case to save you guys time Processor Intel core i Motherboard ASRock Extreme X Cooling NZXT Kraken X Memory Geil Enhance Corsa DDR GB Video Card s EVGA SuperClocked GTX Titan Hard Disk s OCZ Vertex GB SSD Toshiba TB HDD Optical Drive ASUS External BR Burner Power Supply CoolerMaster Silent Pro Hybrid w Software Win Keyboard CoolerMaster Storm Mechanical Mouse ROCCAT Kone Pure nbsp

A:Keyboard and mouse not responding after bootup

Nvm for now, it seems to be working now, but not with my mechanical keyboard, I reverted back to an older usb 2.0 keyboard and now it and my mouse both work fine.

though, my mechanical keyboard does work fine on my old pc.

so still a lil confused on that.
 

http://www.techspot.com/community/topics/keyboard-and-mouse-not-responding-after-bootup.201260/
Relevancy 21.07%

When I play windows media player or any other mp3 player my pc begins to slow down a lot and mouse stutters and my internet webpage closes :/ any help please?

I've posted my IRQ
 

A:When I play music my PC starts to slow down and mouse stutters

What are your system specs?

Some possible solutions: Make sure Windows is up to date. Try updating your sound driver (post your system specs and I will show you how to).
 

http://www.techspot.com/community/topics/when-i-play-music-my-pc-starts-to-slow-down-and-mouse-stutters.200950/
Relevancy 21.93%

I just got new SSD - Transcend 128GB. Installed Windows. When I cold boot my PC -- from a shut off state -- I get this message before Windows loads: "Reboot and select proper boot device or insert boot media in selected boot device and press a key."

However, if I press Ctrl+Alt+Delete and reboot I come into Windows.

If I enter BIOS from cold boot, it does not detect my SSD. After rebooting it detects my SSD. Seems like the SSD is slow at firing up?

I have run chkdsk and memory test without any errors.

My motherboard is the MSI Z87-G55.
 

A:"Reboot and select proper boot device"

Just installed newest BIOS, it didn't help.

When I go into Board Explorer in BIOS it says SATA port 1 is empty. After reboot it says the same port is occupied by my SSD.

Update: Plugged in another hard drive (non-SSD). Same rules apply to it. On cold boot, none of the drives are detected. After reboot, both drives are detected. I used a non-SSD as system drive before this, worked perfectly.
 

http://www.techspot.com/community/topics/reboot-and-select-proper-boot-device.200351/
Relevancy 20.64%

I am having Nvidia Geforce 740M 2 GB graphic card .My Graphic card drivers are malfunctionig.The screen starts to flicker when I play games like dishonored ,arkham city etc .I have tried reinstalling the games as well as I have Uninstalled and then again installed my graphic card drivers again. I have even tried the newer versions of my graphic card drivers. But its not helping.
 

A:Graphic card drivers malfunctioning

Spybat said:





I am having Nvidia Geforce 740M 2 GB graphic card .My Graphic card drivers are malfunctionig.The screen starts to flicker when I play games like dishonored ,arkham city etc .I have tried reinstalling the games as well as I have Uninstalled and then again installed my graphic card drivers again. I have even tried the newer versions of my graphic card drivers. But its not helping.Click to expand...

Your GPU maybe going bad, it happens from time to time and this is based on the fact you have uninstalled everything and tried again. Have you also tried lowering the graphics settings in both games lower to see if that helps? Also try making sure Physx is off because thats very demanding for a 740m since Batman has Physx.

My advice is to seek your notebook manufacturer if nothing I said helps and see if they can replace the card in it. I don't know what else off the top of my head you could try since you have done by the sound of things everything correct.
 

http://www.techspot.com/community/topics/graphic-card-drivers-malfunctioning.200058/
Relevancy 42.57%

Just got the new mouse home, but to enable aim precision and other programmable buttons and need to get the drivers. When I try to download them it says plug in the device, which is already plugged in and I have also tried in different usb ports and safe mode. Anyone with this mouse got it to work?
 

http://www.techspot.com/community/topics/mad-catz-rat-7-mmo-mouse-drivers-wont-work.199725/
Relevancy 21.93%

Hi so yesterday, after I plugged my mouse back in after a night of it being unplugged.. it stopped working
2 out of 4 usb ports get the red light to come on but the mouse wont move cursor or click.. its not showing in device manager either and nothing shows any problems in device manager
 

A:Usb optical mouse not working

Uninstall it from device manager, try again after a reboot.
 

http://www.techspot.com/community/topics/usb-optical-mouse-not-working.199576/
Relevancy 21.93%

Hello all.
I tried both of Kolavec's fixes. Neither worked.
I've also tried keeping Youtube and Task Manager open to check which process was doing the damage...
It seems that keeping Task Manager open stops the video from lagging (also tested on IE 11.0.2).
This antidote, sadly, doesn't extend to games.
This thread was created by someone with the same problem who seemed to have found a trojan responsible for the slowdown. Any and all advice would be appreciated.
PS. I'm so relieved that there are recent thread on this topic! Thank you (and I share the pain of every sufferer).

EDIT:
Following the advice given in linked thread, I found an executable file "vpecyihvyphx.exe" that started upon leaving the mouse idle and disappeared when I moved the mouse again. I await any guidance/ recommendations you have for me.

EDIT 2:
I just downloaded and ran MalwareBytes Anti Malware (Free) and it seems to have done the job for now. I'll keep you all posted and I hope this helped some of you.

Moderator note - Post moved from this thread: http://www.techspot.com/community/t...hen-I-dont-move-my-mouse.196106/#post-1375126
 

http://www.techspot.com/community/topics/videos-lag-when-i-dont-move-my-mouse.199492/
Relevancy 21.5%

I got this same problem with videos in youtube and such. One quess was that it was a bitcoin miner. Any one know how to get rid of it? My antivirus can't find it.
 

A:Videos/games lag when i don't move my mouse

Open Task Manager to the performance tab. Leave mouse idle. Does CPU usage rise?

If yes, hit PRocesses tab, and take a screenshot of which process is taking up CPU time.
 

http://www.techspot.com/community/topics/videos-games-lag-when-i-dont-move-my-mouse.196106/
Relevancy 21.93%

Hi everyone I m looking for a mouse that has a very nice sensor without acceleration but with a few specific DPI settings I d like a native DPI setting and a DPI setting Mouse Suggestions a little higher up to may be okay but is preferable That s about all the requirements throw at me anything that fits I know a lot of decent laser Mouse Suggestions mice can fit that but AFAIK they all tend to have some sensor flaws Aside from that everything else is pretty flexible but here s what I prefer A couple DPI profile settings Light is preferable Not a large mouse Mouse Suggestions medium small A couple side buttons As for the shape I d have to look at the mouse or Mouse Suggestions try it out to know if I ll like it or not I like the shape of the Roccat Savu and Kone pure In fact I almost picked up a Kone pure for on black friday but the Avago held me back I d also like a pretty slick mousepad to go with it something at least as quick as a Razer Goliathus speed I use about cm so it needs to be a medium sized mat Thanks for reading nbsp

A:Mouse Suggestions

I have a Razer Deathadder 2013, it has DPI settings which can be changed in the software from 100 DPI up to 6400, the lights can be turned on or off and it has 2 custom side buttons which can be changed to do whatever you want. I have a Razer Goliathus speed medium mat which is very good and it feels high quality. It is a good size for my hands but I do have quite large hands but I think once you have used it you won't want to go back to a smaller mouse, I sure don't anyway. That's my personal opinion but it's about how it feels to you and has all the features you need.
 

http://www.techspot.com/community/topics/mouse-suggestions.198614/
Relevancy 21.93%

I am using a standard microsoft wireless mouse, that has worked fine for as long as I've had it, but recently I've noticed that when I'm playing a game, I'll get major lag, but then one time I tried using my mouse PAD and I have absolutely no lag. Is there a problem with my mouse? Or just a graphics problem. Help would be appreciated.
 

A:Mouse lag when moving around in games

Wireless mice have been known to cause input lag while gaming. Try a wired mouse and see if it works; if it does, then the problem was the wireless mouse; if it doesn't, theres some other problem and idk without more info.
 

http://www.techspot.com/community/topics/mouse-lag-when-moving-around-in-games.198409/
Relevancy 21.93%

http://I.imgur.com/URr8kFN.png That's my problem. When I move with the mouse, it doesn't move straight; it shakes. I'm using the Feenix Nascita right now. I was using it for about two weeks and it was fine, then all of a sudden I noticed this problem. I tried two different computers, I've tried with and without mousepad. When I use my table it works better than on the mousepad, but if you look closely it's still a problem. I have no idea what's causing this. I even sent this back to the company and they said they didn't get the problem. They returned it and I still have the problem. I've blown on the sensor, tried different DPIs, and different USB ports, nothing helps.
 

A:Mouse shaking problem

Hi, SadMango. I may be able to assist you with your problem. When I purchased this mouse I noticed that it came with a pair of "stick-able" mouse feet that attach to the bottom of your mouse. When I attached these pads I noticed that my mouse movement became very scratchy. I removed these pads and the mouse was back to normal. Try this out. I hope it helps!
 

http://www.techspot.com/community/topics/mouse-shaking-problem.196801/
Relevancy 21.93%

Basically when I move my mouse (just a generic "optical mouse") I get a static sound though my headphones and speakers and people can hear it when it skype with them, unplugging mouse fixes it and it only occurs when I move the mouse. What could be the problem? Side note: This is my Dad's PC, trying to fix it for him with your help of course.
 

A:Static when moving usb mouse

Try a different mouse.
 

http://www.techspot.com/community/topics/static-when-moving-usb-mouse.197745/
Relevancy 21.5%

Recently bought a MS mouse.

Have found that when I move the scroll wheel up or down more than really slowly
a little round icon appears with an up arrow and a down arrow. If the cursor is
above the icon, the page automatically scrolls upward without stopping, and the reverse for the cursor being below that icon. It starts without warning and always goes farther than I want and it goes so fast it's difficult, at best, to react to it before I'm way past what I want to see.

When I click, the thing goes away.

Any way to totally delete this annoying feature other than throwing the mouse away and
getting another Logitech?

Thanks!
 

A:Microsoft mouse scrolling so annoying

Wow I know that feeling. I had a MS mouse that did the same thing. Never could figure out how to stop it from doing that. I search over the internet and never found a answer. Even tried its support site. I ended up getting rid of it and going back to a Logitech.
 

http://www.techspot.com/community/topics/microsoft-mouse-scrolling-so-annoying.197079/
Relevancy 20.64%

Hi!

I remember when I first lost my Motorolas original CD, I couldn't find the software anywhere to be downloaded and no one that i knew had a motorola rzr mobile phone...

I found my old cd here a few days ago so I made an .iso file of it and uploaded it (as 13 .rar files, the file max size is 50Mb).

Here it is

Tel me if the link doesn't work or something.

http://cid-e198cc24bf261f09.office.live.com/browse.aspx/Motorola Razr?permissionsChanged=1&1
 

A:Motorola Razr v3 drivers and software

Yep that works for me.
 

http://www.techspot.com/community/topics/motorola-razr-v3-drivers-and-software.159146/
Relevancy 21.93%

My mouse quit working, keyboard still works when I plug in to USB port it says device malfunction, mouse works on other computers. Can anyone help? Thanks
 

A:Mouse problem

Go to device manager, find all USB devices (including 'hubs), right-click, uninstall. Unplug everything USB from computer, restart (via power button, since mouse/kb won't work).

You should get the "installing driver" balloon on bottom-right when Windows loads. Plug devices in one by one, making sure they all connect and register successfully.

If that still doesn't work, do the above again, but at the shutdown part do this: pull the power plug, clear CMOS (small battery, google it), press power button to clear residual energy, then boot it up and continue.
 

http://www.techspot.com/community/topics/mouse-problem.196840/
Relevancy 20.64%

Hey Everyone,

I'm not sure whether this is the correct place to post this (I'm new here). Sorry if it's the wrong place!

So my problem is I am running a laptop on windows XP. Every time I start up the computer, it prompts me to install device drivers (HID-compliant devices and stuff). The weird part is, I've already installed those drivers when I first got the computer. I've learned to just press cancel every time those prompts pop up, but I'm wondering if I'm able to stop them from popping up every single time I start the computer. I'm also curious as to why it's doing this. Any help would be greatly appreciated!

Specs:
Operating System: Windows XP Service Pack 3
Processor: Intel core 2 duo
RAM: 2GB DDR3 RAM
Brand: Lenovo R500
Graphics: Intel R 4 series express chipset family (on-board)
 

A:Drivers always prompting to re-install (windows XP)

I'm far from an expert, but why not let them install to see if it quits prompting you? If all else fails, you can roll them back. After all, they could be "updated drivers". Just my thoughts.
 

http://www.techspot.com/community/topics/drivers-always-prompting-to-re-install-windows-xp.196822/
Relevancy 21.93%

Hi,
Has anyone this problem or know how to fix it. When switch on my computer the mouse & keyboard do not work. If I then remove all the USB cables it will then work ok, after a few reboots. I am running Windows 8 64 bit. Would appreciate any advice.

thanks,
Verity25
 

http://www.techspot.com/community/topics/usb-mouse-keyboard-problems.196779/
Relevancy 30.96%

Hello

How does the serial number for a Logitech G510 or G510S look?

If you have one of those keyboards it would be brilliant if you could provide just an example of how it looks with some different letters

Thanks!
 

http://www.techspot.com/community/topics/logitech-g510-serial-number.196656/
Relevancy 21.5%

Anytime I watch online videos, or play games w/ my xbox 360 controller the video lags after about a minute passes and I have to move the mouse to make it stop. It's really annoying when I'm playing video games and it throws me off.
 

http://www.techspot.com/community/topics/videos-games-lag-when-i-dont-move-my-mouse-what-do.195950/
Relevancy 21.93%

Hey,

My mouse just died so I need a new one, but I have no clue what mouse to get. I came of a Gigabyte GM-M6800 so every gaming mouse will be an improvement. I have fairly large hands so a big mouse would be a big plus. I did some research and the roccat kone XTD, cyborg R.A.T 7 and the Razer Lachesis are nice sized mice. But I have no clue which one I should get and which is the most durable.
Help is appreciated.
cheers,
 

A:Which mouse is the best for gaming?

Well, I personally like Logitech. But I have never had a true gaming mouse, but I am planning on building a new PC and have been researching peripherals for the past few months. No luck with a keyboard, but for the mouse I decided that I wanted to get the Razer Deathadder 2013. I would recommend a Logitech G500s, but reviewers say that it isnt much of an improvement over the original G500. The Deathadder 2013 has a braided chord, which makes it more durable. But it isnt a laser mouse. But that isnt a big deal since its 4G sensor is plenty good. Make sure you get the 2013 version, since the older version hasnt been updated since 2006.
 

http://www.techspot.com/community/topics/which-mouse-is-the-best-for-gaming.191750/
Relevancy 29.24%

Alright, as the title explains, my computer won't use any form of headset's mic, like at all. Not even its own built in mic, please halp, and I know not **** about computers, so if you could like, explain in ******* terms, I would be incredibly grateful. It might help that I'm a computer gamer, so this would be awesome if you guys would help me. Thank you!
 

http://www.techspot.com/community/topics/acer-aspire-5733-wont-use-logitech-h390s-mic-but-picks-up-sound-wont-detect-voice-on-any-mic.194573/
Relevancy 24.94%

Hi,

I had a power outage in the middle of printing a document on my Photosmart C6150 printer. When the power came back on, the printer was frozen and will not come back up to the ready mode. I canceled the print job from my computer and it indicates that the printer is ready, but the printer itself is in a repeat cycle. All I have on the display is the HP logo and a bar that suggests it is trying to come back up. The exclamation point on the panel then flashes and I get a message that tells me of an improper shutdown and tells me to hit "ok". This message then disappears and it starts the cycle all over again. This has been going on now for two hours. Any suggestions???

Thanks
 

A:Printer will not complete reboot

Try manually shutting it off for a minute and turning it back on.
 

http://www.techspot.com/community/topics/printer-will-not-complete-reboot.194550/
Relevancy 21.5%

Hello Thanks for reading and I know this problem has been on here one too many times but im just very curious as to asking these certain questions before progressing onto what I think I should do My problem is that I New signal. Card. nonfunctional No Mouse and Keyboard recently bought a HIS IceQ mainly for the cooling system it comes with Now I had installed it carefully no static shocks nothing like that into my PC Now when I boot it up I get no signal and my keyboard and mouse are New Card. No signal. Keyboard and Mouse nonfunctional getting NO power at all Now the curious part my pc came with a HD Thats it No VGA output on my motherboard Which makes me think do I need to change something in BIOS Does my PC only detect that because it came with it And yes I plugged in the PCIe power connecters too Now to what I think I should do based on reading through the forums Cmos Reset New PSU And thats basically it Here is a detailed Spec list Name HPE Phoenix HD gb DDR AMD FX Ghz x Ram DDR ThermalTake TR w PSU Motherboard is a Gigabyte AC model BIOS is AMI Ang TB hardrive ANY help is very much appreciated Ive been on this problem for a while now Thanks nbsp

A:New Card. No signal. Keyboard and Mouse nonfunctional

Sounds like a bad connection somewhere. Make sure everything is properly fitted and in the right place. When you replaced the GPU - Is that the only component you unplugged and removed? Try putting in the old card to see if it works. If it does, you could have a bad GPU.
 

http://www.techspot.com/community/topics/new-card-no-signal-keyboard-and-mouse-nonfunctional.194212/
Relevancy 21.93%

This may when lag Video not is moving mouse be addressed somewhere else but whenever I searched this problem I came up with a ton of Video lag when mouse is not moving posts about the opposite issue When Video lag when mouse is not moving I watch a video in any player vlc zoom windows media quicktime it starts Video lag when mouse is not moving to lag after a few seconds until I move the mouse If I keep moving the mouse the video will not lag I ve had this problem on many filetypes mkv mp avi but oddly enough it is also present during flash videos As you can see from my system profile my computer should be able to handle most anything just fine I m running this monitor at x This is a dual monitor setup but I don t think that should affect it I change all of the power saving options so they wouldn t slow down when I wasn t active thought the PCI-E setting might do the trick but to no avail If anything this problem seems to be getting worse over time Please let me know if you have an idea of what the problem might be or if you require information to help Please note that my entire system profile is in my techspot account Thanks nbsp

A:Video lag when mouse is not moving

Mouse is USB I'm assuming.. I'm sure you've already tried a different usb port, if it's plugged into a hub - plug directly into the system. if it's plugged into one of the usb3.0 ports, move it to a 2.0 port. See if issue persists. if so, I'm going to blame a chipset driver, or a software driver for the mouse. if you've recently updated either of those drivers, roll them back. See if issue persists. If so try a different mouse - maybe, maybe it's an issue directly with the mouse. Try the mouse in a different system, see if issue is then on other system. Try these things & post back, I'm curious on this one. Hope this helps, take care!
 

http://www.techspot.com/community/topics/video-lag-when-mouse-is-not-moving.181460/
Relevancy 21.93%

So hello all Just finished putting the finishing touches on my homemade computer intel k gigs corsair speed w modular corsair power supply ASUS p z - deluxe motherboard gb crucial solid state XFX ghz edition graphics card So I have it hooked up to my sharp aquos inch HDTV and I m getting jerky severe mouse movement otherwise graphic acceleration mouse Major Lag seems to be fine tomb raider at ultimate settings was averaged around Major mouse Lag fps I m seeing the jerky mouse movement in games and on the desktop Also tried switching to quot game quot and quot pc quot modes on the tv also tried on my old Panasonic p HDTV that during my last deployment I used to hook up via HDMI to my laptop all the time with no issues that being said I m going to try hooking my in and up to my laptop with the current mouse which I just bought another one of today to no avail and see what happens Any help or ideas nbsp

A:Major mouse Lag

The problem with HD tvs and computers are that they can cause issues like this. Normally it has to do with with the refresh rate of the tv where beyond a certain point (mostly 60hz) the tv signal is delayed slightly causing the mouse movements to be delayed. I see you say you've tried game mode already and now your going to try another tv, but I would recommend trying a monitor if you can find one and seeing if that solves the issue.
 

http://www.techspot.com/community/topics/major-mouse-lag.193310/
Relevancy 21.5%

I tried to update a network controller driver on a homemade XP Computer I got the fatal blue screen after the NVidia slash screen It was an nforce driver Windows would not start I tried to get into safe mode to do a restore But no mouse or keyboard is reading Is there a way to do a system restore at start up with out going to safe mode use Can't Keyboard or mouse safe mode in By the way I don t have a XP CD I do have a product key HELP you XP Gurus Oh and Can't use mouse or Keyboard in safe mode it is really hard to get into even safe mode I saw BIOS once when pressing the Esc button But now it just goes to set up Every F button give me the option of boot menu F or Set up Delete But no matter what I hit it goes into setup The keyboard works fine in that screen But as soon as the safe mode boots up Can t use mouse or keyboard Someone told me could Can't use mouse or Keyboard in safe mode be motherboard did I do thaaaat Again HELP HELP HELP Thanks Ynotbme nbsp

A:Can't use mouse or Keyboard in safe mode

You can download a windows 7 ISO onto a USB flash drive or cd or dvd. Contact where you bought your windows 7 and they will give you a link to download the iso. or maybe you can search the web for a ISO and enter your key later. I don't know if you will be able to navigate without a keyboard and mouse, maybe they will work in the windows 7 setup like your thinking.

Good luck!

p.s. I meant windows XP not 7. Iv done it with 7 I don't see why you cant with XP>
 

http://www.techspot.com/community/topics/cant-use-mouse-or-keyboard-in-safe-mode.192393/
Relevancy 25.8%

Hello,, im not computer savvy but I kno enough to do my basic gaming& email

I would like it if someone could me how to a hard reset
 

A:How do I reinstall OS?

Follow these steps: http://windows.microsoft.com/en-us/windows-8/clean-install. It is the same for Windows 7.
 

http://www.techspot.com/community/topics/how-do-i-reinstall-os.193018/
Relevancy 21.93%

I am having problems with a delayed keyboard and a mouse that lags and won't click properly. Sometimes it won't click at all, other times it clicks and the computer won't register that it's clicking.

I have run all test to ensure it is not a malware and was directed to this forum for assistance.
 

A:Keyboard/Mouse Problems

Seems like your computer is slow. Open up Task Manager and show us the Processes tab, ordered by descending CPU usage.
 

http://www.techspot.com/community/topics/keyboard-mouse-problems.192600/
Relevancy 21.5%

About 2 weeks ago the batteries died in it so I used a USB mouse till I could replace the batteries.
Replaced the batteries, removed the USB mouse & now MS wireless mouse is acting "sticky".
I was forced to go back to my USB mouse.
I've been in the Mouse settings & have done everything but reset the settings.
I've been told optical mouses(mice) need a highly reflective surface so I was using a blank sheet of notebook paper which didn't help much. My USB mouse works fine on the wood colored desk, but the MS optical mouse won't.
I even used a Q-tip to clean the optical area of it, still no joy.
Any suggestion?
 

A:MS wireless mouse kinda jerky

Its still jerky after resetting it to default setting's, so I'm back using a corded optical mouse in hopes of finding a solution.

*EDIT*ABSOLUTELY the most bizarre situation I've ever see. I've removed one of the two batteries in the mouse & so far it has improved considerably. Talk about being confused. How can this be ???
 

http://www.techspot.com/community/topics/ms-wireless-mouse-kinda-jerky.190382/
Relevancy 21.07%

Guys,after having research in net I have come to know that Nvidia r more supportive about there drivers then ATI.I have found that Nvidia are still taking good care about there 4XX gpu on the other hand ATI get forgot their past cards when new series gpu released(said it on basis of driver).ATI just take care well their latest models but Nvidia also takes care of past models
.I want best bang for my bucks which also mean long run in my gaming experience.So which brand should my choice.MY configRO core i5 3470
Ram 8GB
PSU 550watt
Monitor 18.5inch led
GIGABYTE - Graphics Card - NVIDIA - PCI Express Solution - GeForce 600 Series - GV-N660OC-2GD
ORRRRR
MSI Global ? Graphics Card - R7850 Twin Frozr 2GD5/OC
Correct me if I m worng.
SOrry 4 BAD english
Thanksssssssssssssssss
 

A:Nvidia vs AMD when it comes to drivers (who is best for long run)?

Bang for buck at time of purchase is usually AMD. Yeah, NVIDIA has better driver support.. but with a mid-range card I'd just go with AMD.

If you aren't spending money to keep up with the times, don't expect the latest releases to run like butter. That's pretty much it.
 

http://www.techspot.com/community/topics/nvidia-vs-amd-when-it-comes-to-drivers-who-is-best-for-long-run.190979/
Relevancy 21.07%

Hello, I have a Dell desktop PC purchased in 2009 that works great except it will not connect to the internet anymore. I run Windows 7 and have tried enabling DHCP under adapter properties but to no avail. Also installed latest driver (Realtek PCIe GBE Family Controller) and still won't work. When I try ipconfig/remove and renew, it returns "the operation failed as no adapter is in the state permissible for this operation." Below is ipconfig/all:

C:\Windows\system32>ipconfig/all
Windows IP Configuration
Host Name . . . . . . . . . . . . : StudioXPS9000
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Broadcast
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Tunnel adapter Teredo Tunneling Pseudo-Interface:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes

Any help would be greatly appreciated!
 

A:Can't connect to Internet even with new drivers

I think a first step here is to go to Device Manager and remove any/all network adapters you see there, and then reboot.

Second step would be to get the network adapter driver from Dell's site for your dell desktop and Windows 7.

If step 2 is able to be done (like they don't have a win 7 driver for it) you should still see something in Device Manager even if you don't have a proper driver for it. Windows should be able to give you a hardware ID for it, google that and get the Win 7 driver from the chipset provider/manufacturer.
 

http://www.techspot.com/community/topics/cant-connect-to-internet-even-with-new-drivers.190993/
Relevancy 21.93%

Well here is my problem.........wen I connect a mouse through the usb ......the mouse's light , lights up,but wen im moving it,it stay in its spot , so I went the store and he got me another one...I told him try it b4 I leave,and it works,wen I came back here....it still doesnt work.............................NVM it just worked,if u have a mouse that u wana connect with the usb......wait atleast 15 minutes then try moving xDD
 

A:USB mouse problem

Download USBDVIEW installed it and run it as the Admin. Now you look at all the disconnected USB devices. Those devices need to be removed. Do not remove connected devices such as external devices. Make sure there are not USB devices attacked except for keyboard and mouse. Since your are having mouse issues then use the internal one. Once done reboot the system. Then when you bootup again try the mouse again.
 

http://www.techspot.com/community/topics/usb-mouse-problem.190507/
Relevancy 21.93%

Hey guys I'm new here
I'm currently buying new rigs to complete my computer.
I currently own the newest model of the Alienware x51.
Along with the Alienware I own a Logitech THX Certified Z623 Speaker, Razer Arctosa Gaming Keyboard, and a Razer Goliathus Small Control Edition.

I am now looking for a gaming mouse
I have narrowed it down to either the Razer Abyssus or the Roccat Kova+.
I WAS going to get the Roccat but then I thought wouldn't a Razer mouse would look much better with my already Razer Keyboard and Mousepad?
So now I'm confused >_<

Which mouse would you guys choose?
If neither please recommend me another mouse with almost the same price tag

Thank You
 

A:Which Gaming Mouse For Me?

Out of those two, I'd go with the Roccat Kova+

If you're willing to spend a little more however, the Razer Deathadder is also a very good choice.
 

http://www.techspot.com/community/topics/which-gaming-mouse-for-me.189907/
Relevancy 21.93%

I have a Dell Vostro 200 running Windows XP. I bought a new keyboard and mouse but when it loads up the keyboard and mouse don't work. I tried connecting it to the internet so it could obtain the drivers automatically but that didn't work. I then tried to start in safe mode they still didn't work. I checked the BIOS and the USB was enabled. I ran Hiren's boot CD and both the mouse and keyboard work on the Hiren's mini XP OS. I'm stumped can anyone help me please.
 

A:Mouse not working

UPDATE*
I tried both rebooting to last know good config and restoring to an earlier config, neither worked. I am now downloading an XP ISO to try and use it to repair the OS on the PC.
 

http://www.techspot.com/community/topics/mouse-not-working.189647/
Relevancy 24.94%

Hi. my laptop keeps crashing suddenly and I don't know why. I've tried running an anti virus and unistalling the programs I thought could be causing but it still crashes.
 

A:Computer stops working until I reboot

Define 'crash'. Blue screen of death? Freezes, then restarts? Black screen? Suddenly turns off?
 

http://www.techspot.com/community/topics/computer-stops-working-until-i-reboot.189018/
Relevancy 21.93%

Having some weird problem with my computer I just put together last and mouse Static electricity night In my main computer my mouse works fine and there are no issues but with the Static electricity and mouse computer I put together every time I get up off my chair and I am charged with static electricity my mouse light Static electricity and mouse blinks and even goes right out especially when I touch the metal on the chair and the mouse loses power and I am not even touching Static electricity and mouse the computer or mouse or anything near the mouse but the chair I tried a different PSU cause I thought maybe that might be causing it and unplugged hardware and it still did it Also want to mention that I did a stupid thing and I forgot my HDD wasn t plugged in and plugged it in while the computer was on then it shut off and I turned it back on and there was display but then it went blank or it was already blank can t remember so I did a hard shutdown and unplugged it and plugged it back in and it worked ok Could there possibly be some sort of grounding problem nbsp

A:Static electricity and mouse

Motherboard mounted correctly using standoffs?
 

http://www.techspot.com/community/topics/static-electricity-and-mouse.187032/
Relevancy 21.93%

Up until recently, I'd never been particular about peripherals. In fact, it is only now that I've begun to experiment with the features of my mouse driver -- all of which are quite new to me. So I'm curious as to what mouse settings you guys use.

For now, mine are as follows:

- Polling rate is still at default 8ms.
- Mouse speed is at 6/11 in Windows, enhanced pointer precision off, MarkC fix enabled.
- Mouse dpi settings are at 1200 dpi on a 1920x1080 monitor. I toggle down to 400 dpi when necessary.
- Usually, I have the in-game mouse sensitivity set to medium or low.

I'm using a Corsair M60.

What settings do you use when gaming? Do you use these same settings for everything else?
 

A:Mouse settings?

I don't really have access to my desktop right now, so this is a wild guess on my memory, on what I use:

Windows sens. something like 6/10.
1080p monitor.
Maxed polling rate (1000?)
2600DPI on desktop
3400DPI on FPS and other usual games
5600DPI for some weird games with slow movement, or LoL/HoN/DotA (HoN I play mainly) or other RTS as necessary.
 

http://www.techspot.com/community/topics/mouse-settings.187707/
Relevancy 21.93%

As well as other specs, like the ms and such. I bought a mouse from China on Ebay for about 8$ new. The specs say its the same as the death adder, but I have my doubts. I am sure its still a good mouse for the price, but Im curious how good is it? I wanna know did they copy paste the death adder specs or did I really get a smoking deal on this mouse?

here is the mouse btw
http://www.ebay.com/itm/281014362846?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649

p.s. the damn dragon light is blinding me while I type, can I turn it off with software?

p.s.s. the middle mouse wheel is slow hmm (compared to my old mouse)
 

A:What program can I use to detect my mouse DPI?

It seems hard to believe that the sensor would be the same.. But I have no ideas on how to actually test.
 

http://www.techspot.com/community/topics/what-program-can-i-use-to-detect-my-mouse-dpi.187376/
Relevancy 21.93%

I have a HP Pavilion g6-1b79dx with Windows 7 home premium SP1. Recently it stopped detecting any mice plugged into the USB ports. I have tried all 3 ports with 2 different mice. The mice are optical and they light up, so I know they are getting power. However under device manager "Mice and other pointing devices" the only one shown is the touch pad. Please advise.
 

A:HP laptop won't detect mouse

Possibly a cracked or failed system board. If ALLl of the USB ports result in the same failure,.. you need expert help.... I would first try to get hold of another hard drive and run a quick re-install to see if the problem is the same. If so, take it to a shop that has a scope with bright lights... Don't spend a lot of money. A replacement motherboard will perhaps be less costly than spending a great deal of time or money trying to figger out the problem. Your system is fairly old with a lot of use by now, right?.
 

http://www.techspot.com/community/topics/hp-laptop-wont-detect-mouse.181746/
Relevancy 21.93%

I have a problem that has me baffled...and frustrated. My mouse turns off and on by itself. The cursor stops moving, I hear the WinXP, "Bedunk" and then I'll hear it one more time and the mouse will turn back on. It is very annoying while browsing but absolutely maddening while gaming.

I am using a Logitech USBOptical mouse model G500. I have tried two other optical mice. I have tried switching USB ports, every USB port I have! I removed the mouse drivers and tried the WinXP drivers. I tried removing the drivers and reloading Logitechs latest drivers. I updated the motherboard drivers. I updated every driver on my system! I have a Card reader/USB port that I thought might be conflicting so I disconnected it...No Go.

What can I try next? Can I prove somehow whether this is a software issue or hardware issue?
 

A:USB mouse turns off and on

Try new batteries
 

http://www.techspot.com/community/topics/usb-mouse-turns-off-and-on.186914/
Relevancy 24.94%

Hi all!

I have one problem need help.
My computer before have 2 drives (80 GB) drive C is 40 GB, my pc is got virus so I decide to reinstall win xp sp2 after I setup I cannot find my drive D: even on Disk Management,
I also take my Hard Disk to connect with other computer still cannot find it,
Please help me,
thank
 

A:Cannot find drive D after reinstall Windows XP SP2

Is drive D an optical drive?
 

http://www.techspot.com/community/topics/cannot-find-drive-d-after-reinstall-windows-xp-sp2.186712/
Relevancy 20.64%

Hi. I have got this laptop with these specs

i3-2350M
320gb hard drive
2gb DDR3 memory

I have got a CD with it which contains many drivers. for example only for bluetooth there r 3-4 drivers with different vendors. what should I do? install all of them?

* currently I hv installed all of them. Laptop now got a slow startup and hangs some times but dats very rare and recovers most of the times
I dont play heavy games etc on it too

waiting for replies
regards
 

A:Acer Aspire 5749 drivers

So game lags when u playing heavy games if so then its probaly just about managing to play the games with the specs
 

http://www.techspot.com/community/topics/acer-aspire-5749-drivers.185726/
Relevancy 21.07%

I upgraded my PRECISION 470 from a nVidia Quadro FX1400 to a nVidia GeForce 8400GS.
I bought the card on AMAZON and installed the drivers that came with it.
Now, my desktop is bigger than my screen and the mouse leaves tracer mouses.
The adapter is set to my screen's NATIVE resolution of 1920x1080 and connects with HDMI.
Keyboard and mouse response seems slow.
OS is Windows 7 w/ sp1
 

A:Desktop wider than screen, mouse leaves tracers

I just installed a new 24" monitor and at 1080 res the desktop was smaller than screen and blury, the opposite of what your experiencing. I tried updating drivers etc.. but couldnt figure it out at first?
It turned out to be a 'scaling options' setting in the control centre for my radeon gpu!!
Dont know if this helps?
 

http://www.techspot.com/community/topics/desktop-wider-than-screen-mouse-leaves-tracers.185651/
Relevancy 20.64%

I have updated all the sound drivers in my device manager, still my pc is not giving out sound. pls help Dell latitude 120L
 

A:Sound problem, updated drivers

might sound silly but have u checked in your volume control as last week I had same problem then when I clicked on volume icon in task bar volume was down and on mute for some reason
 

http://www.techspot.com/community/topics/sound-problem-updated-drivers.184463/
Relevancy 21.07%

Soooooo, my hard disk crashed before I did a backup, I have no recovery disks, toshiba doesnt ship to afghanistan, I bought a SSD drive, I bought Win 7 64 bit. Before this I tried to recover files by any means necessary, to no avail it dleted all my files and drivers. I installed win 7 and realized I had no drivers. From the Toshiba website I installed all drivers for my model L655D-5066. Everything works except the sound. I click on the speakers fron the device manager and win tells me all the drivers are up to date. The driver installed for sound is conexant smart audio hd 4.119 something. The driver for the speakers is windows 6.1. something; it will not let me use the conexant or anything else. What do I have to or need to do?

This is what I see...










 

A:Installed drivers but no sound

Not sure if I can help, but will take a look...

List any Problem devices

Make sure devices are connected and powered on
Click Start->Run, enter: msinfo32. Click the + sign next to Components to expand it
Click Problem Devices. Anything appear?
If yes, click on it, Ctrl-A to select all, Ctrl-C to copy it, Ctrl-V to paste into next post
On the other hand, if no devices are listed, tell me so
Generate and attach a DirectX report

Click Start->Run, enter dxdiag and click OK
===> If you?re running 32 bit Windows, dxdiag will launch on its own
===> If you?re running 64 bit Windows, you?ll see 64-bit DxDiag. Click it to launch the 64-bit version of dxdiag
Notice progress in lower left window corner
When done, click Save Information button and save as a text file to your Desktop
Attach it to your next post by clicking the Upload a File button

 

http://www.techspot.com/community/topics/installed-drivers-but-no-sound.182977/
Relevancy 24.94%

Ok when I'm using skype or playing Max Payne 3 The sound will automatically turn off and the only way ot get it back is by rebooting.

I have:

Intel i5 750
4gb ram
windows 7
intel whitesberg mobo with onboard sound.

Any ideas about wha to do about this would be greatly appreciated!
 

http://www.techspot.com/community/topics/audio-turns-off-have-to-reboot.183134/
Relevancy 20.64%

Hi all! Please help! My wife's notebook, (ASUS G71GX, Win 7, wireless card Atheros AR928X), wireless connection to our home LAN (D-Link DIR-655) suddenly stopped. It shows the available networks, but cannot connect to it. The hardware manager shows no problem with the wireless card.

I'm not sure what the problem is, but could it be the drivers, not the hardware? So far, I uninstalled and re-installed the driver for the AR928X. No changes, but maybe I didn't do it right.

Could someone help out, please?
 

A:Wireless reads but cannot connect to network... is it drivers?

Never mind. Thanks. I ended up deleting my home network, and then re-creating it. That solved the problem, even though I still do not understand how that worked
 

http://www.techspot.com/community/topics/wireless-reads-but-cannot-connect-to-network-is-it-drivers.182393/
Relevancy 21.93%

Would rather spend around 30 or 35.

Anyway, I would prefer for the mouse to be wireless and the keyboard to be wired. I like a back lit keyboard, but I don't see any of those around anymore for like 20 or 25 bucks. but its gonna be used for some gaming (not like hardcore, but I play pretty regularly)

anyway, im currently (borrowing) a Microsoft mobile mouse 3500. it works really well, just hoping for one slightly larger, maybe with a button or two on the side of it, although that's not a necessity. and most newer ones have a DPI higher than 1000 im thinking, although I havent noticed anything wrong with this.
Thanks for letting me know!
 

A:Need mouse/keyboard for $40 complete max

Mouse: Gigabyte Eco 600
Keyboard: Gigabyte GK-7100 Ultra Slim

Total: around $45 depending on where you live.

its a few dollars over budget but it'd be well worth it (I've tried the mouse, it feels so nice in your hand )
 

http://www.techspot.com/community/topics/need-mouse-keyboard-for-40-complete-max.181371/
Relevancy 31.39%

I'm having trouble getting my head around Logitech's Homeplug technology. From the ads it sounds like ones plugs it into an electrical outlet and the rest of the electrical outlets in the building are on the network. How can this possibly work considering any time an electrical appliance is turned on or off it would create noise on the network?
 

A:Logitech homeplug - is it real?

There is less noise in a home electrical circuit than there is in radio frequencies. A power line network would have less noise to contend with than a wireless network.

There are filters used to filter out unwanted frequencies and stray noise. Not to mention the uses of error detection to catch problems in data transmissions. Upon any detected errors the data is sent again.
 

http://www.techspot.com/community/topics/logitech-homeplug-is-it-real.182025/
Relevancy 21.5%

As the title says, my mouse stops working for a couple of seconds and then starts working perfectly again. It mainly happens when I am playing BF3, the game freezes for a second, then I hear the usb-removal sound Windows makes and the game unfreezes but the mouse is dead, then game freezes again for a second and mouse starts working. During the moment mouse is dead all other USB connected things works, only mouse that dies.
It has happened a few times before when im not in any game.

Why is this happening? I have never had any problem with this before.
I have tried putting my mouse a different USB port and it helped for a day or two and then it happened again.

Windows 7 Ultimate 64bit
i5 2500k
GTX 580 Twin Frozr II
8GB RAM
 

A:Mouse randomly dies for a couple of seconds

I have had this same problem a few months ago. Although it happened with my mouse and keyboard simultaneously. My main harddrive was going bad. I replaced it and have not had the problem since. It was rather confusing at first as I had never seen these symptoms before from a bad harddrive.
 

http://www.techspot.com/community/topics/mouse-randomly-dies-for-a-couple-of-seconds.181873/
Relevancy 21.93%

Hello to all the experts and members,
I hope all the experts and members will be fit and fine .
I want to use my mobile as a pc mouse how can I do it if any one know tell me the method hope my problem will be solve I need help advance thanx waiting 4 ur replays
 

A:How can I use my mobile as a PC mouse?

I can't think of any obvious mechanism to do this, they are different devices.
 

http://www.techspot.com/community/topics/how-can-i-use-my-mobile-as-a-pc-mouse.181825/
Relevancy 46.01%

I currently have a gtx 560 ti and I'm acquiring a gtx 670. So, in the end, both cards will be under the hood.The 670 will go into the currently 560 ti slot and the 560 ti will go into the currently empty slot. Both use the same driver, do I have to reinstall it, or just stick the new gpu to the mobo and be happy ever after?
 

A:Do I have to reinstall the drivers when adding a new GPU?

Generally, I say you should always re-install graphics drivers when adding a new card.

What is the reason for running both cards at the same time?
 

http://www.techspot.com/community/topics/do-i-have-to-reinstall-the-drivers-when-adding-a-new-gpu.181526/
Relevancy 20.64%

I recently bought a 1TB external drive in the first month was the paradise of about three months here been hell ...

The problem is that the windows when i connect the disk, sometimes it correctly detects and installs the correct drivers, other times it detects wrong and installs other wrong drivers.
When you install the wrong windows drivers in Disk Manager says that is not present or does not detect the capacity, despite the indication that I have the the connected USB device. Another indicator light is always on the disc, rather than intermittently (indicating that it is accessing data) ...


To be even more difficult the drivers are registry keys ...


Have tested it on several PC with W7 and XP sp3 and the problem still occurs ...

Have I contacted the support of the disc but the impression I got is that understand of hardware even less than me ...


Can you help me please!!
 

A:Wrong plug-and-play drivers

OMG! what is the brand/make/model of the external drive in question?!? I have never heard of a known brand to do something like that unless the enclosure itself is hosed and/or beginning to fail. Post back & let me know, take care!
 

http://www.techspot.com/community/topics/wrong-plug-and-play-drivers.179651/
Relevancy 21.93%

Hello, I have really strange problem that I couldn't find any solution. I have HP Probook 4710s and Windows 7 ultimate installed.
My mouse pointer won't move whether I use mouse or touchpad. Well to be exact sometimes rarely I can move it, but its lagging. So I decided to reinstall windows and format my disk, just to be on safe side. It didn't solve the problem. I tried to shout down my laptop and pull out battery and power. It still didn't solve the problem. Interesting is that my pointer wouldn't move even when I was installing windows.
Now with "fresh" windows when I connect my mouse it won't recognize it, but it still worked for a minute (lagging) then I saw that the LED in the mouse is off -.-
Please if you have any suggestions what I can try to fix or diagnose this problem, post it
 

A:Mouse pointer problem, Win 7

Are you using a wireless USB mouse, or a wired USB mouse?
 

http://www.techspot.com/community/topics/mouse-pointer-problem-win-7.179908/
Relevancy 18.49%

Hi all,

I found this issue in the last day or two, progressingly getting worse. It did it with two separate mice and would not go away. After some thinking I decided to remove the usb plug from NEXT to the one I was using for my mouse. It fixed the issue. I think that the reason I was having an issue was that the usb ports could not handle so much load on all of them, and therefore was causing glitches in the data when it was sending and receiving from the mouse. If in doubt, remove all usb plugs and try it again. Thats my 2 cents for today
 

http://www.techspot.com/community/topics/mouse-cursor-shaking-from-side-to-side.181179/
Relevancy 21.07%

I'd like the wireless version of this mouse, but my experience with wireless mice is that they are not as responsive and accurate as a wired mouse. Is that still true and is it true for this mouse? That's if anyone has used both versions.

I'll just go for the wired mouse to be on the safe side probably.
 

A:How responsive is the Cyborg R.A.T. 9 wireless mouse compared to the wired version?

Wireless mice are just as or even more responsive now than wired mice are
 

http://www.techspot.com/community/topics/how-responsive-is-the-cyborg-r-a-t-9-wireless-mouse-compared-to-the-wired-version.180156/