Windows Support Forum

24 Volt connector wont fully connect to Motherboard

Q: 24 Volt connector wont fully connect to Motherboard

Hi,
So I have noticed my pc would shut off randomly and its because the 24 volt connector wasn't in all the way so when the pc would move slightly the connector would disconnect itself. When I go to push the 24 volt in all the way it wont clip onto the clip on the motherboard. It will stay in but it wont fully go in and I can easily just pull it out or it will just fall out from movement. Any ideas how to fix this?
Motherboard- http://www.newegg.com/Product/Product.aspx?Item=N82E16813130741
PSU- http://www.newegg.com/Product/Product.aspx?Item=N82E16817139026

Relevancy 100%
Preferred Solution: 24 Volt connector wont fully connect to Motherboard

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: 24 Volt connector wont fully connect to Motherboard

I think it is not 24 volts. it is a 24-pin(also labelled as 20+4pin) , 12volts main power connector.
the slots are designed so that the power connector will slide into the slot to form like a 'lock and key'. to remove it.
see to it that the power connector is inserted in the right direction as shown in the pics (towards the side):


edit, any moderator: please delete this post.
(my second post to this thread is more 'presentable')

http://www.techspot.com/community/topics/24-volt-connector-wont-fully-connect-to-motherboard.206189/
Relevancy 22.79%

As the title says , I accidentally cut a wire between 2 pins (or whatever they are called) and now my PC starts slowing down after 20-25 minutes when I open it. After I restart everything is back to normal but after 20-25 mins its the same again. Is there a way to fix the wire between them or I have to buy a new motherboard? (sry , my english isnt very good. I hope you understood what is my problem) the image is what im talking about ,(the red is the wire) ,I got the motherboard picture from google , so its not mine.
 

http://www.techspot.com/community/topics/accidentally-cut-wire-between-2-pins-in-motherboard.217587/
Relevancy 23.22%

Hi . considering that I don't overclock , I don't wanna SLI , im gonna buy cpu I7 4790 4G - 32G ddr (8x4 quad channel) - Windows 10 64bit .What's the best gaming and cheapest gigabyte motherboard on the market ?
 

http://www.techspot.com/community/topics/gaming-motherboard.217380/
Relevancy 30.1%

Just to start off I am COMPLETELY clueless and have no tech savvy whatsoever so simple language would be appreciated I ve owned this laptop for a little over a year and all this time I ve been able to connect to Wifi without a problem This morning the icon at the bottom left of but Laptop with Ethernet will Wifi, won't cord an to My connect connect the screen told me there was no Internet connection available when I troubleshot it it suggested using the Ethernet cord to connect The Ethernet cord connects them fine and the internet connection becomes available but I m still unable to use the Wifi This is an issue with my laptop because all the other devices My Laptop won't connect to Wifi, but will connect with an Ethernet cord in my house are able to connect to the Wifi and the modem is showing all the appropriate lights and such I ve tried turning it off and on again but alas this once that method has failed I ve also tried resetting the modem and it made no difference Last night I was uninstalling various programs that I didn t need and that s the only thing I ve done differently to my usual computing habits I don t think I removed anything unless I knew what it was but it s possible I accidently removed something important I don t know if that has any relevance or not but it s all I can think of as the reason for this My laptop is a Toshiba Qosmio and the system I use is Windows My modem is Telstra Bigpond Please help D nbsp

A:My Laptop won't connect to Wifi, but will connect with an Ethernet cord

How far from the router are you? I experience the same thing occasionally on my laptop.
I usually have to switch the wifi switch off on the laptop & on then I reboot & I'm back online. My laptop & tower are both about 50' away & on the lower floor where the router is. Good luck.
 

http://www.techspot.com/community/topics/my-laptop-wont-connect-to-wifi-but-will-connect-with-an-ethernet-cord.197531/
Relevancy 20.21%

I have been working on setting up a Minecraft server for a couple of days now and I cannot find a way to get my friends outside of my network to connect connect my to can't My server friends Minecraft I know I gave them the right IP address and I have tried several solutions with no luck I can however connect to the server from other computers connected to the same router but I think that only works when I have it set My friends can't connect to my Minecraft server to quot cracked quot mode I tried disabling my firewall on both my host computer and my router using a different computer as the server host and changing the port All solutions I have tried gave the same message to my friends quot Cannot reach server quot My friends can't connect to my Minecraft server when I was able to connect just fine Here is some possibly useful information Host computer It s not the best -OS Windows XP Professional SP -Processor Intel Pentium GHz uni-core -RAM MB -IP Address Minecraft Server -Version jar Router -Type Wired Wireless -Brand Cisco -Model Linksys E -IP Address -Router Information Firmware Version build Apr Firmware Verification e c b ec c b c ceb Current Time Fri Jan Internet MAC Address FC CB -Internet Connection Connection Type Automatic Configuration - DHCP Internet IP Address Subnet Mask Default Gateway DNS DNS DNS MTU DHCP Lease Time Hour If there is My friends can't connect to my Minecraft server any other information you need please tell me nbsp

A:My friends can't connect to my Minecraft server

You need to forward some ports (router settings) and then open incoming port in your firewall (OS settings). Start here.
 

http://www.techspot.com/community/topics/my-friends-cant-connect-to-my-minecraft-server.175806/
Relevancy 19.78%

When I try and access the internet through any of the main browsers (I.e. Internet Explorer, Google Chrome, Firefox and Safari) they tell me along the lines of 'unable to access the network' and 'this page can't be displayed' after taking a while attempting to load. I also cannot access it through any of my Windows 8 apps. I know it's not an issue with the home broadband itself and is something to do with my laptop as it is running fine both wirelessly and through using an Ethernet cable on all other devices. I would really appreciate some help with trying to fix this asap as I have spent a lot of time researching this issue and trying most things to resolve it without success, I also need to use the internet for loads of coursework over the summer hols and cannot afford to be taking it to a pricey IT technician. Please helppp
 

A:My laptop cannot connect to the internet, even though wireless and ethernet are working

Take a look at the file
\windows\system32\drivers\etc\hosts​there MUST be at least a line reading 127.0.0.1 LOCALHOST
but the question is there anything other than comments in it?
If so, leave the comments and the localhost line and delete everything else.

If you modify the hosts file, then you also need to

ipconfig /flushdns
net stop "dns client"
net start "dns client"

 

http://www.techspot.com/community/topics/my-laptop-cannot-connect-to-the-internet-even-though-wireless-and-ethernet-are-working.195158/
Relevancy 19.78%

I recently used a program Autoruns,, and deleted some startup things I shouldn't have.. Since then I cant connect to internet, the troubleshooter for wireless adapter says the Windows wireless service is not running on this computer (WLAN Autoconfig service) and fails to start the service.
I notice on windows task manager there are only about 13 Processes running and there are usually about 20, and on Services there are about 40 running and about 100 or more stopped services. Thanks for the help

Also on startup now I have a pop up on bottom saying, Failed to connect to a windows service. Windows could not connect to the System Event Notification Service service. This problem prevents standard users from logging on to the system. As an administrative user, you can review the System Event Log for details about why the service didn't respond. And the startup and logon time is really long now
 

A:Windows 7 can't connect to internet through Wifi or ethernet cable

Sounds like you deleted the network drivers, I did this once and ill be honest unless someone here knows a trick, or you have a CD with drivers you are going to have to have a hell of a time unless you know the name of the hardware and download the right driver, thats my guess. best of luck
 

http://www.techspot.com/community/topics/windows-7-cant-connect-to-internet-through-wifi-or-ethernet-cable.200026/
Relevancy 22.36%

Elitegroup Computer Systems, better known to PC enthusiasts as ECS, may soon kiss the branded motherboard market goodbye. Sources familiar with the matter claim ECS is planning to exit the DIY board market due to shrinking global demand and increased...

Read more
 

A:ECS reportedly set to exit consumer motherboard market

Wow didn't even know these guys were still around I've not touched and ECS board since the athlon 64 days and even then I wouldn't buy one lol.

Not saying they were terrible but I've never been a budget system builder so their products have never appealed to me.
 

http://www.techspot.com/community/topics/ecs-reportedly-set-to-exit-consumer-motherboard-market.215774/
Relevancy 21.93%

Since pure alcohol, for example pure Isopropyl alcohol and distilled water are supposed not to conduct electricity. What would happen if I dipped a turned-on PCB into it? . What would happen to a motherboard?
 

A:Would a PCB or motherboard be damaged if dipped into pure alcohol/distilled water while turned on?

OUCH ! Your assumptions may be spot on, but OMG why would one try this?????????

There's something called 'leakage' - - current flow when it's not expected.

I was working in an aerospace lab and the the EE had me perform an experiment because I said "the resistivity of the salt water was too low and leakage would trigger the device". So we got a bucket of salt water and dropped the device into the bucket - - precisely 30 seconds later (the designed timeout), the bucket erupted and salt water spewed everywhere [yes, the device was an explosive link].

The trigger point for the explosive was <500ma
 

http://www.techspot.com/community/topics/would-a-pcb-or-motherboard-be-damaged-if-dipped-into-pure-alcohol-distilled-water-while-turned-on.215856/
Relevancy 20.21%

I'm trying to connect my PC and my Asus Zenfone 2 with Bluetooth. When I use the "add a device" wizard on Windows 8.1, my mobile phone is detected, but when I try to add it I get: "Windows doesn't have a network profile for this device".

Also, when I try to detect my computer with my mobile phone, itīs not detected.

I'm using a Trust USB 2.0 dongle Bluetooth adapter (the little one you insert on the usb port) that came with a keyboard and mouse Bluetooth set that I used. Could that dongle be designed only for the bluetooth keyboard and mouse set?
 

A:I cannot connect my phone to my PC (Windows 8.1) with Bluetooth

The Bluetooth device seems fine as it already detected your keyboard and mouse. However, your phone seems not supported with the current Bluetooth device and you might need to take another look.
 

http://www.techspot.com/community/topics/i-cannot-connect-my-phone-to-my-pc-windows-8-1-with-bluetooth.215646/
Relevancy 20.21%

So about a few weeks ago (not exactly sure when it started) my computer stopped allowing me to access certain websites. It started out with only a few, but now it is almost 50-80% not connecting. I do not think it is a problem with my browser. I typically use Firefox, but IE will connect to the same ones Firefox allows, and will also not connect to the same websites Firefox will not allow.

I have searched these forums for a couple of hours now and nothing seems to fit my exact problem, and I am hesitant to use the solutions from other forums because it might further hurt my system. I am not tech-savvy/computer literate to say the least, and I would need a thorough walk-through on how to diagnose the problem, as well as how to fix it.

Any help would be greatly appreciated.
Thanks
 

A:Unable to connect to most websites -- not a browser problem

How are you not allowed to view the website? Does the page show "The page cannot be displayed"? or you are not authorized or something else?

Try running cmd.exe, type "ipconfig /flushdns" without quotes.
 

http://www.techspot.com/community/topics/unable-to-connect-to-most-websites-not-a-browser-problem.177710/
Relevancy 19.78%

So I have 2 images from the Device manager.
The driver has a Yellow caution sign with "!" inside it.



My issues:
Cannot Connect to wireless, But can connect via Ethernet Cable.

My troubleshooter said the drive couldn't start, and that I needed a Wireless Cable to plugin to the computer.

This is my school computer, my help desk helped before but they are out of office because its summer break.

Device Manager > Components > Problem Devices
Atheros AR5B97 Wireless Network Adapter PCI\VEN_168C&DEV_002E&SUBSYS_E034105B&REV_01\4&124A40C8&0&00E1 This device cannot start.
Also 2 things.
I tried disabling my Bluetooth High Speed, it did nothing.
I do not know if this is the right thread, because this is my first post, if there is anymore information you need to know please contact me.
 

A:Atheros AR5B97 driver not letting me connect to wireless

Hi and welcome to the boards.

How old is this system? Sometimes the wireless card will fail and a new one can be installed.

However, you can upload and install the latest wireless network driver for your system via ethernet cable. Sometimes that is all you need. If it is a built system like a Dell then go to the manufacture's website if this was a system that was built by yourself or someone else then go to the motherboard's website.

Please keep us updated.
 

http://www.techspot.com/community/topics/atheros-ar5b97-driver-not-letting-me-connect-to-wireless.215528/
Relevancy 22.79%

Hello,
I had a dell optiplex 7010 (service tag# 3LLBSW1) computer.
I took the motherboard out of this computer and installed it into a new ATX case.
all went well now I 'm having problems connecting the front panel audio, power switch, reset switch, & HD LED)

the dell connector is different than the cables I got on the new case. can anyone please help me to figure out how to plug these cables into the motherboard.

thanks
 

A:Dell Optiplex 7010 motherboard

Attach photos.
 

http://www.techspot.com/community/topics/dell-optiplex-7010-motherboard.198629/
Relevancy 20.64%

My Asus Q550LF crapped out on me. I was browsing when a whole bunch of black rectangles appeared on my screen, about an inch long. I restarted my computer thinking it just froze or something. I could occasionally get to the desktop page if I unplugged the charger but now it doesn't even turn on. It'll make one beep when I push the power button but that's it. What might the issue be and is it gonna be expensive? Because this computer has been one of the worst I have ever owned and I would just scrap it or something if it might end up being costly.
 

A:Laptop wont turn on anymore

How old is it? It sounds like it could be a multiple of hardware failures including the motherboard. The black rectangles sounds like what we call video card artifacting which means the video card is dying. But the fact that it is not even booting up could point to a failed hard drive. Again, it could be anything.

Asus is known for poor customer service but you could try giving them a call.

Do you know anyone who can do some diagnostics on it? I certainly would be checking out the hard drive.
 

http://www.techspot.com/community/topics/laptop-wont-turn-on-anymore.214221/
Relevancy 33.54%

At Computex 2015, Intel has announced Thunderbolt 3, a new iteration of the company's high bandwidth hardware interface. And for the first time, Intel has ditched Thunderbolt's proprietary connector, instead opting to funnel everything through the soon-to-be-ubiquitous USB Type-C connector.

Read more
 

A:Intel launches Thunderbolt 3, will use USB Type-C connector

Can I mention this is f*cking epic!
 

http://www.techspot.com/community/topics/intel-launches-thunderbolt-3-will-use-usb-type-c-connector.213614/
Relevancy 23.22%

Hi guys

I have an intel DP55WB whitsburg a pair of matched 2gb sticks installed at the moment in slots 1 and 3 and nothing in 0 or 2.

I put a new 4gb stick of IBM ram in and get 3 long beeps and it keeps repeating. Everything goes back to normal when I take out the new stick. It happens in both slots 0 and 2.

Am I doing something wrong? With the new stick do I need to change the placement of my original ram?

Thanks!
 

A:New ram makes motherboard beep

This motherboard has support for DDR3 1333 /1066 MHz DIMMs. If you insert DDR3 1600 it probably will not work. Intel motherboards are famous for sticking to the specifications and not exceeding them. I own 2 Intel Motherboards.

I don't know if this is allowed but here is the Intel Specifications of the Motherboard.
http://www.intel.com/content/www/us/en/motherboards/desktop-motherboards/desktop-board-dp55wb.html

Make sure you unplug the computer from the wall or the power strip before adjusting RAM DIMMS. All RAM is different. Normally you add it in Pairs to maintain the dual channel functionality. If you don't the RAM will slow down. It is not wise to mix and match different kinds of RAM. This can be related to capacity, latency, SPEED, voltage. Then some RAM may not work with other RAM due to incompatibility with the existing RAM. Some RAM may not work in your motherboard due to incompatibility with the motherboard. Some shorter DIMMS also use a different voltage and you cant mix different voltages. RAM is not just buy it and stick it in.
 

http://www.techspot.com/community/topics/new-ram-makes-motherboard-beep.212524/
Relevancy 22.36%

I get a bit jittery when I'm unplugging cable connectors (these images are just examples, I'm thinking of all types of connectors). What's the best way to safely unplug them?, pull from the cables or from the plastic case. What's your experience?. This pics are just a few examples of connectors. I'm posting this thread about any type of connectors. Thank you.


 

A:What's the best way to unplug laptop cable internal connectors on motherboard etc?

Many simply pull apart. Watch out for the ones with locking tabs though. I don't think you have anything to worry about as long as you take your time.
 

http://www.techspot.com/community/topics/whats-the-best-way-to-unplug-laptop-cable-internal-connectors-on-motherboard-etc.212863/
Relevancy 22.36%

Hello,

I have a HDMI cable for my monitor, with a nvidia graphic card...

but now I have a big doubt, I dont know if my motherboard's graphic card's imput is not working anymore or if its my graphic's card after a FLASHY BLACKOUT today...

my nvidia control panel is not working anymore... whenever I try using VGA or HDMI with my graphic card it doesnt show any sign in the screen... so im currently using my normal VGA motherboard's imput...

I tried using an old graphic card and its not working, I tested the VGA cable and HDMI cable and they are working perfectly...

yet, after I set the graphic card in the slot, the fan it start working, if I unplug the graphic card but leave the curent cable, it doesnt start the fan so I guess the motherboard's imput is working

so idk what's the problem here, I have all the drivers and everythign was working perfectly before the blackout
 

A:Broken motherboard slot or graphic card

Well... its too late and soon for expect an answer but...

I tested my graphic card in an old motherboard and it was working... it didnt load windows cuz of the diferent motherboard but connecting my VGA in my gpu worked, and the HMDI didnt work I guess because it need to be configured after windows loading etc
 

http://www.techspot.com/community/topics/broken-motherboard-slot-or-graphic-card.212639/
Relevancy 23.22%

So I made my first custom build pc recently and my specs:
Motherboard: Z97 GAMING 5
CPU: Intel 17-4790k
GPU: Gigabyte Geforce G1 GTX 970 4GB
Ram: 16gb ddr3

In my MSI software (MSI Command center) it goes around the 85 degrees when I play Battlefield 4 on ultra.
Is the motherboard temp the same as the CPU temp? and is 85 degrees too much?
I do use the stock cpu cooler.
Also I have a 200mm front and a 140mm in the back.
 

A:Motherboard at 87 Degrees?

Download HWiNFO64 and use this software to compare temps. Not saying there is anything wrong with the MSI software, but there is always a possibility that it is not reading the correct temps.
Also, do you overclock? Overclocking will affect the temps, especially if you are still using stock coolers.
 

http://www.techspot.com/community/topics/motherboard-at-87-degrees.212568/
Relevancy 20.64%

My windows 7 laptop can connect to the internet, but unable to browse.

I can ping www.yahoo.com with zero loss
when I type ipconfig I am seeing my IP address

I have 4 other computers connected to the internet at home here no issues, it is just this one computer.

I have tried multiple browsers. I have tried both wired and wireless I even copied a chrome installer exe from a usb drive to the computer and ran it. When I double clicked the exe it WAS able to download the chrome software and install it, so I am definitely connected to the internet. But if I try and open a website, chrome says ERR_NETWORK_ACCESS_DENIED.

I.E. and firefox as well, no connection.

Thank you for your help in advance!
 

A:Can connect but can't browse internet

Update, I am able to browse in safe mode with network... but unable to in normal mode.
 

http://www.techspot.com/community/topics/can-connect-but-cant-browse-internet.212468/
Relevancy 20.21%

Alright I ll make it short but informative I can t connect cable able internet Only via to ethernet to connect to the internet without an ethernet cable I have tried pressing the laptop s quot WiFi quot button but nothing has happened The light didn t even change I have tried Only able to connect to internet via ethernet cable rebooting and going into BIOS to see Only able to connect to internet via ethernet cable if there was on option there nothing I Only able to connect to internet via ethernet cable have tried going into Device Manager and under quot Network Cards quot I got options I believe I had options though now I have only first I tried to deactivate it and the reactivate it but that just made it not work at all and when I got home and got my connection back I tried to update the drivers which is when I noticed I only had because I was at school when all showed up so I didn t have connection to update them but it just said that they were all up to date I have tried using the windows recovering tool to go back before the problem occurred Though I did get an error the first time due to my AVG being up so it couldn t complete but after that I tried doing it again with AVG off but the situation didn t change and I know the problem isn t with the router as the problem occurs with different WiFi s In the beginning it would only say quot can t connect to the internet quot over and over again but now it won t even show the available WiFi networks in the area Any help is much appreciated nbsp

A:Only able to connect to internet via ethernet cable

Any suggestions at all? if you require more information in order to come up with a solution, just tell me what you need an ill try my best to figure it out
 

http://www.techspot.com/community/topics/only-able-to-connect-to-internet-via-ethernet-cable.212310/
Relevancy 19.78%

Hello I need to connect power/reset buttons to dell optiplex 620, but I just can't connect them anywhere on motherboard.

I need help as fast as possible

Thank you
 

http://www.techspot.com/community/topics/dell-optiplex-620-connect-power-reset-buttons.212270/
Relevancy 21.07%

Hi I have an HP zbook white a K610m GPU. I want to play GTA V and I read on forums it helps to disable your gpu. howerver when I disabled my GPU the screes flashes black for like 1 sec and then my gpu isnt disabled. can you help me to resolve this?
 

http://www.techspot.com/community/topics/gpu-wont-stay-disabled.212026/
Relevancy 55.9%

HI, I was wondering if it is safe to use an atx psu on a motherboard with an eatx power connector. The motherboard has a 24-pin eatx and a 4-pin atx 12v connector. I bought the motherboard and started using an atx psu and everything seems to work ok then realized after it was an eatx power connector on the motherboard. Are there eatx psu's? Thanks
 

A:Safe to use ATX PSU on a motherboard with an EATX power connector?

EATX is a form factor (12"x13") not a power connector. I'm assuming you are talking about using a PSU with a 20 pin (old ATX) connector with a newer motherboard that has a 24 pin (current ATX) connector. If that is the case you will need to consult your motherboard's manual. Some 24 pin boards run fine with only 20 pins some don't. The issue is that each pin in only rated to carry a certain amount of current (Amps). If you overload one of these pins your risk burning or melting the ATX connector on either the PSU, Motherboard, or both.
 

http://www.techspot.com/community/topics/safe-to-use-atx-psu-on-a-motherboard-with-an-eatx-power-connector.181034/
Relevancy 22.79%

Current specs
Intel db75en
Intel i5 3rd gen 3450
Gtx 970 amp extreme edition
Samsung evo 120
PSU corsair vs 650
Liquid cooler h50 corsair

Currently they are on LGA 1155 mobo

I just killed my old motherboard
And now I am planning to buy i7 4790k

There are three motherboards I have in mind and all of them are asus z97 series based. Want to buy only asus..
Z97 A
Z97 k
Z97 c

I want to know that whether I should upgrade and get 1150 mobo and new processor or not!

(I have no plans to put dual gtx 970 bt plan to use secondary gfx card (gtx560) as phyx dedicated card)
If yes then
1. Which mobo I should go for and why?
2. Will the old h50 will be fittable on my new board or not!

Any new advise also appreciated!
Thank You
 

http://www.techspot.com/community/topics/motherboard-liquid-cooler-suggestions.210943/
Relevancy 19.78%

Hi there,

The laptop I have is an asus P550C, windows 7.

This laptop came pre-installed with Mcafee Antivirus protection for a limited amount of time. Wifi was working perfectly fine although there were occasions where the connection would disconnect by itself. After the free-trial ended, I did not want to buy the packaged they were advertising so I went to my Control Panel and uninstalled Mcafee. This was when the problem started to occur. The internet access icon had a red x and when I went to diagnose the problem, it said that I needed to connect via an ethernet cable. Since then, I have connected it with an ethernet and internet works and I have also installed AVG's free antivirus software.

I have tried to
type: ipconfig /flushdns
type: nbtstat -R
type: netsh int reset all
type: netsh int ip reset
type: netsh winsock reset

But I still cannot connect via wifi. Please help
 

A:Wifi has stopped working but still able to connect to internet via ethernet cable

C:\Users\jay>ipconfig/all

Windows IP Configuration

Host Name . . . . . . . . . . . . : jay-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : vlan1.phub.net.cable.rogers.com

Ethernet adapter Bluetooth Network Connection:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Bluetooth Device (Personal Area Network)
Physical Address. . . . . . . . . : 54-35-30-05-36-68
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . : vlan1.phub.net.cable.rogers.com
Description . . . . . . . . . . . : Realtek PCIe GBE Family Controller
Physical Address. . . . . . . . . : BC-EE-7B-28-57-D7
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::9dfa:dcc6:3d3b:ae86%11(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.0.20(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : March-27-15 4:14:52 PM
Lease Expires . . . . . . . . . . : March-28-15 4:14:52 PM
Default Gateway . . . . . . . . . : 192.168.0.1
DHCP Server . . . . . . . . . . . : 192.168.0.1
DHCPv6 IAID . . . . . . . . . . . : 247262843
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-1A-51-D7-D4-BC-EE-7B-28-57-D7

DNS Servers . . . . . . . . . . . : 192.168.0.1
NetBIOS over Tcpip. . . . . . . . : Enabled

Tunnel adapter isatap.vlan1.phub.net.cable.rogers.com:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . : vlan1.phub.net.cable.rogers.com
Description . . . . . . . . . . . : Microsoft ISATAP Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes

Tunnel adapter isatap.{A9DA0935-EE1F-4A59-8A97-DDA13A7DFFEA}:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter #2
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes

Tunnel adapter Teredo Tunneling Pseudo-Interface:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
IPv6 Address. . . . . . . . . . . : 2001:0:9d38:90d7:2c47:1b6c:9c1d:d26b(Pref
erred)
Link-local IPv6 Address . . . . . : fe80::2c47:1b6c:9c1d:d26b%14(Preferred)
Default Gateway . . . . . . . . . : ::
NetBIOS over Tcpip. . . . . . . . : Disabled

C:\Users\jay
 

http://www.techspot.com/community/topics/wifi-has-stopped-working-but-still-able-to-connect-to-internet-via-ethernet-cable.210787/
Relevancy 23.65%

Hey Guys plz help me out in finding a Compatible MOTHERBOARD which can be upgraded further
Requirements
I have intel Q6600 Processor Core 2 Quad 2.40 GHz (4 CPUs)( I would like to overclock it)
Navidia 9800GT 1gb
Ram 4GB DDR3

I dnt knw if wifi and blutooth comes inbuilt in motherboad if ys thn also include them.
And also suggest a Compatible SMPS Socket(LGA 775)
 

A:Need a motherboard

What is your current motherboard?
 

http://www.techspot.com/community/topics/need-a-motherboard.209509/
Relevancy 19.78%

A while ago, after accidentally opening the Store app, Windows forced me to restart to install Windows 8.1, which I was unable to weeks before because of driver issues. I didn't need Windows 8.1 yet, so I didn't download it before then.

However, during the installation, it failed (again) due to either my antivirus or the aforementioned driver issues. Upon logging back in, my computer was unable to find any WiFi networks. Seeing as I live in the middle of a densely populated city, this isn't possible. Plugging in an ethernet cord still works, so no issues with that adapter or my home internet. I checked all the drivers for my WiFi adapter, and my Ethernet adapter, and both are up to date and display as working properly. Restarting several times didn't seem to fix this issue, and using system restore didn't seem to work either. I used the Troubleshooting tool, and that didn't give my any helpful advice or answers, so I got nothing.

What can I do to fix this issue?

For reference, I have a Broadcom 802.11ac Network Adapter, Driver Version 6.30.95.14, and a Qualcomm Atheros AR8151 PCI-E Gigabit Ethernet Controller, Driver Version 2.1.0.7.
 

A:Unable to connect to WiFi after failed Windows 8.1 update

Never mind, it seems to have resolved itself overnight after I put it to sleep for several hours.
 

http://www.techspot.com/community/topics/unable-to-connect-to-wifi-after-failed-windows-8-1-update.210268/
Relevancy 20.21%

Whenever I connect my external hard disk to my laptop, my computer freezes as soon as I My Computer to access it or click on 'Open to view files' in the autorun menu. I cannot do once this happens. Not even task manager can be opened. The computer unfreezes and starts working fine after I unplug my hard disk. But it works just fine on my friend's laptop.
This started happening a few days ago. Till then I could use the hard disk normally without any problems. Can anyone please help me out with this problem?
My operating system is windows 7 and I am using Avast Internet Security 7 antivirus
 

A:My laptop freezes when I connect an external HDD

What type of external HDD is it? Of what Brand?
 

http://www.techspot.com/community/topics/my-laptop-freezes-when-i-connect-an-external-hdd.180809/
Relevancy 20.64%

I have been having a problem on several devices conecting to my WiFi router saying there is a problem with Authentication. I have just relised that if I disconect the ethernet cable from my desktop computer to the router the WiFi works without porblems and as soon as I reconnect it I cant connect to the WiFi anymore. I using windows 8.1.

Any suggestions?
 

A:Can't connect to WiFi when LAN connected.

What is the make and model of your WiFi router? It sounds like a setting is enabled within the router that is giving precedent to your Ethernet connection over your wifi connections.
 

http://www.techspot.com/community/topics/cant-connect-to-wifi-when-lan-connected.208892/
Relevancy 23.22%

I have a computer that I built and I am pretty sure the motherboard is going out on me... Any suggestions for a new motherboard that will support the parts I already have from my previous build?

MoBo - thats going out - : ASUS Crosshair IV Extreme AM3 AMD 890FX SATA 6Gb/s USB 3.0 Extended ATX AMD Moboo

Processor: AMD Phenom II X6 1100T Black Edition Thuban 6-Core 3.3GHz, 3.7GHz Turbo Socket AM3 125W Desktop Processor

Hard Drive: Seagate Barracuda 7200.14 ST3000DM001 3TB 7200RPM 64MB Cache SATA 6.0Gb/s 3.5" Internal Hard Drive

Memory: G.Skill Ripjaws X + Turbulence II Series 16GB (4 x 4GB) 240-Pin DDR3 SDRAM DDR3 2133 (PC3 17000) Desktop Memory Model F3-17000CL9Q-16GBXLD

Videocard: EVGA 02G-P3-1386-KR GeForce GTX 460 (Fermi) 2GB 256-bit GDDR5 PCI Express 2.0 x16 HDCP Ready SLI Support Video Card

I built this thing around 2011 so any suggestions for something new that will work for me?
 

A:Motherboard for my build

Take a look here: http://www.newegg.com/Product/ProductList.aspx?Submit=ENE&IsNodeId=1&N=100007625 600158776
 

http://www.techspot.com/community/topics/motherboard-for-my-build.208651/
Relevancy 20.64%

Hopefully someone can answer this as im baffle, my computer will turn on and of with no problem as ling my printer is plug in but if printer cable unplug it won't turn on but if printer cable in plug in it will turn on but while the comptuer turn on and I unplug the printer cable it will shut down nothin making since but as long the printer is unplug it will not start or boot blank screen but printer plug in I can get to the boot or cmos screen please help Thanks

PS it a Dell PP17L Latitude
 

http://www.techspot.com/community/topics/pc-wont-turn-on-if-printer-not-plug-in.208502/
Relevancy 23.22%

Greetings. I have an Asrok Z77 Extreme 6 Motherboard.

I currently have an I5 3570K in there. I believe my Mobo is LGA 1155.

Can I pull out the 3570L and drop in a I7 4790K? I 'think' they are the same socket.

Not sure if I will see any real increase in performance. I over clock the I5 to 4.2.

Any advice is welcome.
 

A:Question about my motherboard

Larsenex said:





Can I pull out the 3570L and drop in a I7 4790K? I 'think' they are the same socket.Click to expand...

Sorry, no. While your motherboard does have socket 1155, the processor i7 4790K is socket 1150. You'll need a new motherboard.
 

http://www.techspot.com/community/topics/question-about-my-motherboard.208311/
Relevancy 21.93%

Okay so I am starting this thread here seeing as how Clock and A10-6800K AMD Motherboard Wrong Setting Voltages Speeds the topic of the old one no longer applies to this situation I jumped ahead of myself trying to overclock this CPU which made me question the frequencies and voltages which are supposed to be set automatically by the motherboard I am having a tough time understanding all this I will post links to the exact AMD A10-6800K Motherboard Setting Wrong Voltages and Clock Speeds parts I am AMD A10-6800K Motherboard Setting Wrong Voltages and Clock Speeds using so whoever is keen enough to try to help will know what we re dealing with Motherboard MSI A X-G Gaming CPU AMD A - K Richland GHz Turbo Black Edition RAM Mushkin Enhanced Blackline DDR MHz PC V CPU-Z Screenshots After doing some AMD A10-6800K Motherboard Setting Wrong Voltages and Clock Speeds reading in regards to overclocking I have found out some details which are totally incorrect in my case For starters the FSB to DRAM Frequency Ratio from what I read is supposed to be some reported slightly higher ratios or something similar but CPUZ is showing which sounds absurd Also it s reporting the RAM as PC - at MHz and voltage at I haev Intel XMP enabled on the motherboard and the motherboard reports memory speed in BIOS at DDR- MHz Can someone analyze the above shot and information and clue me in as to what is wrong and what needs to be done I would really appreciate it because I am baffled I have no clue what the CPU-NB frequency and voltages are for so I don t want to mess with something I don t know anything about Anyway any and all help is much appreciated as always nbsp

A:AMD A10-6800K Motherboard Setting Wrong Voltages and Clock Speeds

Go into the BIOS and change the DRAM voltage to 1.60 or 1.65V and set the timing as u see XMP-2132
 

http://www.techspot.com/community/topics/amd-a10-6800k-motherboard-setting-wrong-voltages-and-clock-speeds.208183/
Relevancy 23.22%

Hello All I am having a bit of a strange issue that I have with CPU Motherboard or Strange issue never run into before Yesterday after getting home from the store I booted up my PC and started to play a game although I noticed that I was getting framerate stuttering It seemed to keep dropping a lot throughout my play So I started taking a look at some of my sensor utilities Strange issue with CPU or Motherboard When I opened Asus Probe II I noticed that it was telling me that one of my chassis fans weren t running Okay no problem it must have gone bad I than took at look at the frequency and noticed that my AMD FX- was only running at GHz per core I also checked CPUZ and had the same results So I booted to the bios just to take a look and noticed that it show my Chassis fan WAS running fine and that my frequency was at GHz per core as it should So I though that it must be a fluke Booted back into windows and again same issues So I shutdown and took the side off my case which is also where the Chassis fan it said was running is located Turned the computer back on and noticed the fan was running fine I logged into windows and noticed that seconds after windows logs in that one chassis fan turns off and the CPU underclocks to GHz multiplier All of the other fans in my case still running perfectly GPU running fine HDD s running fine Could it be possible that Asus probe II itself is underclocking my CPU If so what would be causing the fan to shut off My first thought was power-supply but I have no issues when stressing my hardware even in this state I am an IT consultant but have not run into this issue before Any help would be greatly appreciated PC Specs- ASUS m a r Motherboard AMD FX- CPU CoolerMaster HYPER N CPU Cooler Kingston HyperX Blu GB x Galaxy Geforce GTX Ti OC w PowerSupply Cougar Evolution Full Tower Case Samsung gb SSD Let me know if you need any other information nbsp

A:Strange issue with CPU or Motherboard

CPU temperature too high?
 

http://www.techspot.com/community/topics/strange-issue-with-cpu-or-motherboard.203184/
Relevancy 20.21%

I remember some time ago I found a option which made my computer connect itself to the internet but now I cant find it.Help?
 

A:Have to manually connect to the internet on startup

Make and Model of computer? What Operating System are you using?
 

http://www.techspot.com/community/topics/have-to-manually-connect-to-the-internet-on-startup.207918/
Relevancy 43.86%

Hi, I have a MSI g31m3 v2 s-7529 motherboard and wont turn on.
I change the power supply
I put on some themical paste in the cpu
I put away all hard drivers
but didnt work, only the fan turn on then its turn off
I think the motherboard dosent work.
 

A:Motherboard wont turn on

Please provide list of make and model for everything you have for this setup (CPU, RAM, GPU, Hard Drives, Optical Drives, Power Supply, Aftermarket coolers, etc.). We need to make sure that you have all compatible parts.
Also, have you tried to disconnect all things except the power supply connection to the motherboard, CPU & RAM and see if the motherboard starts?
 

http://www.techspot.com/community/topics/motherboard-wont-turn-on.208015/
Relevancy 22.36%

Wanted a gaming config ...
I have GCARD > NVIDIA GEFORCE GTS 450 (ASUS)
I NEED a good motherboard for gaming with intel core i3 4160.... 3.6ghz ,lga1150
my options are :
gigabyte/asus
B85 M D3H (or other b85 variants)
H87 M D3H (or other h87 variants)
H97
H81

all above are compatible but its really difficult 2 choose as the differences
even among same chipsets are too close(eg there are variants under same
h87)

all the above boards r in my budget!

games downloaded:
watch dogs ,cod(adv warfare,ghosts),max payne 3,MOH (warfighter),FAR CRY 4,ASSASINS CREED UNITY,Crysis 3 ,Dead Rising 3 ,Dead Space 3 ,GTA,LA Noire,Middle-earth: Shadow of Mordor,Need for Speed Rivals ETC ETC (thank god PIRATE BAY is up agn from COSTA rica)
 

A:Suggest motherboard for nvidia GTS450 & i3 4160 (gaming)

I would go for either the H87 or H97. It is really your choice in the end but all of the ones listed are good. ASUS, Gigabyte, and Asrock are all good board manufacturers.
 

http://www.techspot.com/community/topics/suggest-motherboard-for-nvidia-gts450-i3-4160-gaming.207743/
Relevancy 23.65%

Not sure if this is only confusing to me, but why are there so many different versions of X99 boards by EACH manufacturer?

I'm looking at Asrock, they have about 10 models: http://www.asrock.com.tw/microsite/IntelX99/

Then I'm looking at MSI and there are 6 models: http://www.msi.com/product/mb/#?category=Socket 2011-3&category_no=1179

SERIOUSLY, how to choose?
 

A:Which X99 Motherboard?

There are several ways you can choose a motherboard, but I personally look at the brand first before looking at features because some manufacturers are more reliable than others. I personally like ASUS and Gigabyte but ASRock and MSI are alright also. Now, onto features. There isn't really much you can differtiate between motherboards of the same chipset since most features are largely unimportant to the regular consumer. Usually the more expensive boards have more "features", whether relavent/important or not, is up to the buyer. I would check out this link.

If you still have questions, please ask.
 

http://www.techspot.com/community/topics/which-x99-motherboard.207791/
Relevancy 20.21%

About or months ago I switched to a new internet provider whom also sent me a new modem Problem is is that To My Party Modem How 3rd To Connect Provider's New My Service? this new modem prevents my burglar alarm s dial out alert system from contacting my nominated phone numbers during an activation test If I turn off the modem there is no problem the alarm works perfectly This would be fine except that my brother in law lives next door and uses my internet connection so it is inconvenient if I m away and have to switch the modem off to have the alarm fully functional Prior to the provider change over I was using a rd party TP-Link TD-W ND modem with my prior service provider This modem caused no problems at all with the function of the burglar alarm when left on Therefore I would like to use the TP-Link modem again but I can t get it to work on the new service From memory the modem that was supplied by the new provider was basically plug and play and all I did was just cable it in and there was no keyboard work required This is why I don t know why the TP modem doesn t work since I didn t change anything Evidently there are some How To Connect My 3rd Party Modem To My New Provider's Service? configurations that do need altering but I haven t got a clue Any help or ideas Tom nbsp

A:How To Connect My 3rd Party Modem To My New Provider's Service?

Hello there, You need to apply the appropriate ADSL and network settings on the modem so it can connect to your new provider's network. The ISP support should provide those. Hope you get it up and running soon.
 

http://www.techspot.com/community/topics/how-to-connect-my-3rd-party-modem-to-my-new-providers-service.207609/
Relevancy 20.21%

This all started after I reset the router putting in new pass code I m using same name of the old SSID When you click to Windows SSID was to unable connect on the wireless network connection on the name of my SSID on connect it saying Getting information from SSID this sounds like Windows was unable to connect to SSID good thing that windows can see the router and talk to it Type in the network key same thing looks like windows can see the router and talk Windows was unable to connect to SSID to it I type in the network key and OK Than it is saying windows was unable to connect to SSID name I have set up other computers and it can connect but this one computer running windows cannot I have the pass code down on paper and other computers can connect So wrong pass code is not the case The only thing I can think of is is computers using the old profile or my network card may need to be reset When I open networking sharing center and click on manage wireless networks I removed the old profiles in the list But I m not sure if there is still some kind of conflict or the old setting still there some where Well because I m using the same SSID despite the router reset and new pass code I m not sure why I cannot connect unless Windows was unable to connect to SSID the windows thinks I m connecting to the old SSID I tried to restart the computer and no change nbsp

A:Windows was unable to connect to SSID

Force the system to forget that SSD and then reboot.
Now look for it again and enter the passphrase.
 

http://www.techspot.com/community/topics/windows-was-unable-to-connect-to-ssid.207365/
Relevancy 19.78%

I have a Windows 7 HP desktop system that is connected to the internet via an ethernet cable. The system says it is connected, and a ping confirms it is accessing the internet. BUT, all the browsers say the computer is not connected to the internet (tried Chrome, Firefox and IE). All of the Microsoft network adapters (6to4, ISATAP adapter, ISATAP adapter #2, Teredo Tunneling Adapter) shown under device manager cannot start (Code 10). the Realtek PCIe FE Family Controller is the only network adapter shown as working properly. What do I need to do to fix this? Let me know if there is any other information needed to help me.
 

A:Windows 7 computer says connect via ethernet and ping confirms but cannot get to any page

Does your router see this computer on the network?
Are you on Private Network or Home Network?
Is the IP address showing 192.168.x.x or is it showing 169.xx.xx.xx?

NIC network card you can do a few things. You can can disable it and re-able it.
Open dos prompt
type: ipconfig /flushdns
type: ipconfig /release
type: ipconfig /renew

Give this a sec or two.

Now under services.msc (use the control panel and type services)
Select view local services
Scroll down for
DHCP Client (right click and stop it) wait then right click and start it
DNS Client (right click and stop it) wait then right click and start it

If none of the above work go into the device manager. under control panel type: device manager. click on device manager

-Network adapters
-Realtek PCI-e this one uninstall the drivers (BUT DO NOT DELETE THEM)

Two options here.
One: Scan computer for new hardware changes
Two: Reboot the PC

Choose Two, because Windows will re-install the drivers and setup network card settings. for you. The Choosing One would do that same but you really want to flush out any prior issues that got you to this point.
 

http://www.techspot.com/community/topics/windows-7-computer-says-connect-via-ethernet-and-ping-confirms-but-cannot-get-to-any-page.207373/
Relevancy 20.21%

Updated my hardware drivers including the wireless adapter, and something must have gotten changed as I can not connect to wifi anymore on HP Notebook G72-253NR with Windows 7.

Flushed winsock, released/renewed ipconfig and deleted/reinstalled adapter. Can meanwhile connect thru Ethernet cable again but not wifi. Finds my wifi network (previously didn't) but can't connect, don't have tcp/ip addresses in LAC or wireless properties, automatically obtain is enabled. IPv4/6 enabled in both also.

Getting message of "HOST Process was prevented from changing settings of ZoneAlarm by modifying registry key HKCS/Services/VSDATANT? at initial startup.

"COM surrogate was prevented from changing settings of ZoneAlarm by modifying registry key HKCS/services/vsdatant" whenever I simply access/exit ip protocol settings.

How can I fix this? My brain is fried after several DAYS of trying to fix my friends computer... Please someone help!
 

A:Can't connect to wifi after hardware driver update

Call your ISP they will walk you through it.
 

http://www.techspot.com/community/topics/cant-connect-to-wifi-after-hardware-driver-update.206983/
Relevancy 23.22%

I m a tech with years of IT experience PSU. power bad Still or motherboard a won't up Not and I ve built my fair share of computers over the years I have a puzzling one I cannot get to Not a bad motherboard or PSU. Still won't power up the bottom of I m afraid I cannot for the life of me Not a bad motherboard or PSU. Still won't power up get this computer to power on Here is a list of things I ve tried and or eliminated The first thing to happen was quite strange The computer would start when I first got it it was a used system but only after a few presses of the power button I don t ever remember it powering up on the first press of the power button It s an Intel DX BT Extreme Series motherboard with a bit Intel CPU in it GB of RAM FYI the motherboard has a aux power on off switch ON the motherboard itself used for testing at the labs - the manual recommends using the front panel switch however obviously Current state the computer will not turn on at all There are two LED s by the CPU that are for indicating a voltage regulator overheating and the CPU overheating When I hit the power switch the VR Regulator LED blinks quickly once and that is all Ok here goes - Tested PSU came back fine Decided to use that PSU in another system to double check would not boot up in the nd system I replaced the PSU with a good one I know that works of even higher wattage Still doesn t boot up - Tried using onboard power switch same result Tried using the reset switch as a power switch same result so the switches are likely OK I even removed all front panel switch connectors and tried to jumper the two power pins using a flathead screwdriver Still doesn t boot up no power only a solid green light on the mobo when power is plugged in - Reseated all RAM sticks although a system should still POST if a stick is bad as well as CPU same result - Replaced RAM with RAM I know works Same clock speed compatible with this motherboard Again if it s RAM it shouldn t prevent the fans from spinning - Replaced CPU with a good one same socket factor Still no powering up - Removed all other hardware USB cables video card speaker connector drives etc same result - Also replaced the fan with a non-OEM intel fan that has a higher RPM and draws more air - Tried replacing thermal paste on the premise that since the VR reg is showing it s overheating hopefully this would do something - Replaced CMOS battery Same result After testing just about everything I came to the conclusion that it must be a bad motherboard What Yeah a faulty Intel motherboard I ve never heard of such a thing So I RMA ed the board and got the new on in the mail How puzzled was I when the same exact thing happened Words can t describe Solid green light when power cord is plugged in VR light flashes BTW the green light is a V Standby Power Indicator Now in the manaul it states that these lights CPU amp VR LED s will flash when they re indicating a fault not blink once So I tried all the steps again nothing I have replaced every piece of hardware I can think of with good hardware and am still getting the same result - a flashing VR regulator LED Intel has no support for this and the people I ve spoken with at tech support at Intel are stumped My only thought left is a grounding issue which would seem strange to me since the problem gradually got worse that is taking more presses of the power button to power on then eventually no response I am going to switch cases and see if that s the problem If that fails I am out of troubleshooting steps - I ve literally replaced EVERYTHING inside and outside the computer Again to reiterate these are the things that have remained constant in both motherboards original and RMA ed Solid green V Standby Power Indicator Flash of the VR LED when applying power I have replaced every component with the exception of the case and the standouts which I believe have grounding rings on the threads Any ideas nbsp

A:Not a bad motherboard or PSU. Still won't power up

Speaking of shorts, try pulling the motherboard out of the case. Place it on a non-static, non-conducting surface and leaving in the CPU, heatsink/fan, only hook up the PSU, RAM and graphics card, see if will post.
 

http://www.techspot.com/community/topics/not-a-bad-motherboard-or-psu-still-wont-power-up.151315/
Relevancy 20.21%

I laptop My wirelessly to will the connect not internet have had my laptop for around a year and it has always connected to the internet both wirelessly and through the cable Suddenly for no apparent reason about a week ago it stopped working All that I had done was turn on my quot Guest Account quot and download Skype It worked for a few minutes after this and then stopped completely- if I hovered over the wireless connection on the bottom right of my screen there is a big red cross and it tells me that there are no wireless networks available in the range We have another laptop which we use from My laptop will not connect wirelessly to the internet the exact same location within the My laptop will not connect wirelessly to the internet house and this connects no problem it also finds another or so wireless networks in the neighbourhood I know that there is not a problem with my router modem as I can connect via my other computer I have not done anything to the laptop except the installation above- I tried uninstalling this and turning off the Guest Account but still no joy I looked at other posts on here and tried some of the things suggested but still no joy I thought I would try to be clever also and think I have actually made this worse so that it is now beyond repair I know with most computer based things uninstalling and reinstalling it can work tried this and have now uninstalled my wireless network cannot now find where it is to reinstall If you are able to give me suggestions to fix this please treat me as a novice as although I know some things about computers I really don t know enough to decipher some of the more technical terms Thanks in advance nbsp

A:My laptop will not connect wirelessly to the internet

bangj001 said:





I have had my laptop for around a year and it has always connected to the internet both wirelessly and through the cable. Suddenly, for no apparent reason, about a week ago it stopped working.

All that I had done was turn on my "Guest Account" and download Skype. It worked for a few minutes after this and then stopped completely- if I hovered over the wireless connection on the bottom right of my screen, there is a big red cross and it tells me that there are no wireless networks available in the range.

We have another laptop which we use from the exact same location within the house and this connects no problem, it also finds another 7 or so wireless networks in the neighbourhood.

I know that there is not a problem with my router/modem as I can connect via my other computer. I have not done anything to the laptop except the installation above- I tried uninstalling this and turning off the Guest Account but still no joy.

I looked at other posts on here and tried some of the things suggested but still no joy.... I thought I would try to be clever also and think I have actually made this worse so that it is now beyond repair!! I know with most computer based things, uninstalling and reinstalling it can work... tried this and have now uninstalled my wireless network...cannot now find where it is to reinstall!

If you are able to give me suggestions to fix this, please treat me as a novice as although I know some things about computers, I really don't know enough to decipher some of the more technical terms! Thanks in advanceClick to expand...

I assume you're using some sort of windows machine. Have you tried a system restore to a previous state when the OS used to work?
if not you should try that first by going to Programs>accesories>system tools> system re-store and select a time from when the laptop used to work fine.

Mm
 

http://www.techspot.com/community/topics/my-laptop-will-not-connect-wirelessly-to-the-internet.158976/
Relevancy 23.22%

A time ago I was plugging in to many USB devices at the same time. I had received a message saying that a power problem had occurred. Since then I have been unable to use the two ports, and I have looked up multiple guides on how to fix this. Nothing has worked, and I have run out of options. I do not have the disk anymore for the drivers.
 

A:Universal Serial Bus on MotherBoard

Just a note to any one, Keep the driver disk, not that would have helped, but there is always a chance u might need to reinstall the operating system.
 

http://www.techspot.com/community/topics/universal-serial-bus-on-motherboard.206796/
Relevancy 19.78%

The (Tp internet connect to 740n) router link via Unable to router worked fine in the past until recently my ISP had a break in the cable line and repaired it Now I am unable to connect to the internet If Unable to connect to internet via router (Tp link 740n) I connect the ISP s LAN cable directly to PC windows and do the following steps Control panel gt View network stats and tasks Setup a new connection or network gt Connect to the internet gt Next Broadband PPPOE gt Next Type in username password gt Connect Internet works fine This means there is no problem with the internet connection However if I connect the ISP s LAN cable to the quot blue quot port of the router and the short LAN cable to my PC then do the following steps Open http tplinklogin net It shows me router config page Click Quick setup gt Next Select PPPoE gt Next Type in username password gt Next Leave the Wireless Page untouched gt Next Click Reboot Wait till router reboots It does not work the router page shows quot Connecting quot but does not connect at all Here s the router log TL-WR N System Log Time - - s H-Ver WR N v S-Ver Build Rel n L M W PPPoE W M G st day OTHER INFO User clear system log st day PPP NOTICE PPPoE start connecting st day PPP NOTICE Standard authentication st day PPP INFO pppd start st day PPP INFO sent PADI Host-Uniq x st day PPP INFO sent PADI Host-Uniq x st day PPP INFO sent PADI Host-Uniq x st day PPP ERROR Timeout waiting for PADO packets st day PPP NOTICE Standard authentication st day PPP INFO pppd start st day PPP INFO sent PADI Host-Uniq x de st day PPP INFO sent PADI Host-Uniq x de st day PPP INFO sent PADI Host-Uniq x de st day PPP ERROR Timeout waiting for PADO packets st day PPP NOTICE Standard authentication st day PPP INFO pppd start st day PPP INFO sent PADI Host-Uniq x d st day PPP INFO sent PADI Host-Uniq x d st day PPP INFO sent PADI Host-Uniq x d st day PPP ERROR Timeout waiting for PADO packets st day PPP NOTICE Standard authentication st day PPP INFO pppd start st day PPP INFO sent PADI Host-Uniq x st day PPP INFO sent PADI Host-Uniq x st day PPP INFO sent PADI Host-Uniq x nbsp

A:Unable to connect to internet via router (Tp link 740n)

Please help me
 

http://www.techspot.com/community/topics/unable-to-connect-to-internet-via-router-tp-link-740n.206843/
Relevancy 23.65%

Hello all

I have a HP Pro 3405 Microtower PC and I recently reinstalled Win 7 Ultimate.
Now I did a very stupid thing, I managed to install a DDR 2 1GB RAM on a DDR3 DIMM slot, don't ask me how but I did. There was also a DDR3 2GB RAM already there.

I quickly took out the DDR 2 and restarted the system, since then I've been getting 5 beep at startup which means "pre-video memory failure". I reseated the RAM, nothing changed. I looked on google on how to fix it but nothing worked.

I ordered another 2GB RAM from Offtek, same specs as the original RAM stick.
When I tried to install it today, it still was giving me the 5 beep code.
I've tried reseating it, resetting the BIOS, taking out the PSU... nothing >.<

Have I fried my motherboard? Or is there a solution I haven't tried yet?

Thanks in advance
 

A:RAM 2x 2GB on motherboard

If you have tried all that you speak of, sounds like you really messed up your motherboard. I don't think there's much you can do. Maybe if you know what form factor the motherboard is, you can replace it with one like it. If you don't know more then how to replace the RAM in a computer, I would not recommend going strait to replacing a motherboard.
 

http://www.techspot.com/community/topics/ram-2x-2gb-on-motherboard.205839/
Relevancy 20.64%

Hi. This is my first post on this forum.

I would like to ask some help regarding a problem with my internet connection. Connecting our separate PC and my Laptop to my LAN works perfectly fine but when I use our wireless network to connect my laptop and phone, that's when the problem occurs. I tried rebooting the router (unplugging the power switch, cables and such). And I also tried rebooting my phone and laptop but nothing works. I also tried looking at the router settings and tried changing the security settings to none to see if I can connect but still cant.
I just don't know what the problem is. Can you help me?
Thank you.
 

A:Can connect to LAN but not on wireless network

Hey strings12. A bit more info on your equipment would be helpful.
1) What is the OS (Operating System) and Service Pack Level of your laptop, SP1,2,3 ?. rIght click on My Computer icon and select Properties
2) Are we talking about one laptop here?
3)Is your router secured and what encryption method are you using, WEP,WPA or WPA2
 

http://www.techspot.com/community/topics/can-connect-to-lan-but-not-on-wireless-network.198872/
Relevancy 46.44%

Please help.. Can't connect to the wifi but using ethernet is working fine.. My phone could connect to the same wifi though
tried to backread some of the threads but didn't work on my laptop
 

A:Cannot "fully" connect to wifi but works fine on ethernet

Additional info. I am using Atheros AR5006EXS Wireless Network Adapter
and I did deleted the driver and it installed again automatically, but sadly it still doesn't work
 

http://www.techspot.com/community/topics/cannot-fully-connect-to-wifi-but-works-fine-on-ethernet.206650/
Relevancy 34.83%

Hey, so I have an OCZ ZT 750 and its one of the units which runs 100% fan noise when ever im doing anything that requires the GPU, ive seen you can run the fan into a molex with a resistor to keep it constant, but what I want to do is, run it to my fan controller, just so I can ramp the fan up if needed, rather than nailing down the performance.

What I found is the fan is a 2 Pin connector, but fan controllers run 3 pins, am I able to run the 2 pin into the 3 pin on the fan controller and have control over it, or does the 3rd pin need to be connected for it to work?
 

http://www.techspot.com/community/topics/psu-issue-with-the-fan-pin-to-pin-connector.206390/
Relevancy 22.79%

Hey guys, building a new PC, and I decided not to go too cheap with core components and leave the video card until later, while still getting everything in one go. Now this being the case, I will need to run non-dedicated graphics for a while (which are decent nowadays). Anyway, I want to go with the Gigabyte GA-F2A88XM-D3H Motherboard and an AMD A10-6800K Richland CPU,

Will the video outputs on the motherboard work with the APU and will I be able to use integrated video until I get a dedicated video card?

The Newegg page for the motherboard says "Integrated Video: None", so I am a little bit confused, is there no integrated video chipset because that's what the CPU is now being an APU?
 

A:AMD A10-6800K with what motherboard for integrated video?

I just built a home office build system for my parents using that exact board with an A4-6300 Richland in a Cooler Master HAF 912 (I really like this case for microATX boards). The board was great to work with and since the APU is on the chip itself my folks didn't need to purchase a video card.

So to answer your question: Yes you'll get your video.

* I would seriously consider getting an aftermarket cooler to replace the heatsink that comes with it.
 

http://www.techspot.com/community/topics/amd-a10-6800k-with-what-motherboard-for-integrated-video.205551/
Relevancy 23.22%

Hello I upgraded my cpu a while ago without checking if my mobo could run it.. worked fine on low usage but when I tried to stress the Cpu the pc died and wont boot/post. Is it the cpu or motherboard that takes damage from this? (Or both?)
I tried with my old cpu but with same result.
/ Andreas
 

A:125W cpu on 95W motherboard

Can you link us to your motherboard, your new cpu and your old one as well?
 

http://www.techspot.com/community/topics/125w-cpu-on-95w-motherboard.206146/
Relevancy 22.79%

Just bought a new board and I dont know how to get my geforce gts450 card working
 

A:New motherboard failing to show my card

Have you installed latest NVidia driver pack compatible with your operating system?




www.nvidia.com/Download/index.aspx?lang=en-usClick to expand...


 

http://www.techspot.com/community/topics/new-motherboard-failing-to-show-my-card.206126/
Relevancy 21.07%

My new build wont power on all I hear is a few high pitch sounds coming from what I think is the psu.
My specs:

SSD 128GB SAMSUNG 850 Pro
1TB HDD (from previous build it was working fine 2 days ago)

2TB HDD(from previous build it was working fine 2 days ago)

GPU = GTX 680 2GB (from previous build it was working fine 2 days ago) MSI GTX 970 GAMING 4G GeForce GTX 970 4GB 256-Bit on it's way in the mail.

Case is pretty old and doesnt have a lid but it was working fine with my pervious buid)

PSU = CORSAIR Enthusiast Series TX750 V2 750W ATX12V v2.31/ EPS12V v2.92 80 PLUS BRONZE Certified Active PFC High Performance Power Supply (from previous build it was working fine 2 days ago)

Heatsink = Scythe Ashura Universal Processor Cooler

CPU = Intel Core i7-4790K Haswell Refresh Quad-Core 4.0GHz

Motherboard = MSI Z97-Gaming 7 Intel Z97 Motherboard

Memory = CORSAIR Vengeance 16GB (2 x 8GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory

Please help me
 

A:New build wont power on

Disconnect everything except the monitor, cpu, ram. In fact, go down to 1 stick of ram. Will it POST now?
 

http://www.techspot.com/community/topics/new-build-wont-power-on.206021/
Relevancy 21.07%

I'm attempting to connect my laptop to my Wi-Fi but I'm having problems. I'm able to connect other devices with no problems, but when I try connection my laptop I get a "limited connection" message with a yellow triangle. Someone please help!! Tell me what info about my laptop you need from me.
 

A:Unable to connect to Wi-Fi

"Other devices"? Do you mean other WiFi networks? If so, then reboot your router. Also make sure your laptop's wireless can handle what your router is outputting (ac, n? 2.4vs5.8Ghz).
 

http://www.techspot.com/community/topics/unable-to-connect-to-wi-fi.205919/
Relevancy 23.65%

Hi, i currently have 2 x 1GB sticks of ram in my motherboard at the moment and wondered if i could buy a 4GB stick of ram and use it in conjunction with one of my 1GB sticks of ram, is this possible?
 

A:RAM 1GB & 4GB on motherboard

What are the specs of your pc? how many ram slots do you have spare?

DDR memory must be used in identical pairs for it to operate in dual channel mode. also if your using a 32 bit operating system only 4GB of memory will ever be used by your system.
 

http://www.techspot.com/community/topics/ram-1gb-4gb-on-motherboard.172809/
Relevancy 23.65%

So Im looking for a new motherboard here are my current specs MSI H a Looking Motherboard new for M-P LGA Intel H SATA Gb Looking for a new Motherboard s USB Micro ATX Intel Motherboard Zotac ZT- - L GeForce GT Graphic Card - MHz Core - GB GDDR Looking for a new Motherboard SDRAM - PCI Express x Intel Core i - K Haswell Quad-Core GHz LGA W Desktop Processor Intel HD Graphics BX I K G SKILL Ripjaws X Series GB x GB -Pin DDR SDRAM DDR Zotac ZT- - L GeForce GT Graphic Card - MHz Core - GB GDDR SDRAM - PCI Express x So this was my first build and it went great did make the mistake of getting a micro ATX and I have a massive case things that bother my about my current motherboard is that I dont have enough SATA plugs I have alot of hard drives and second I just got monitors and it only has PCI plug So Im also thinking about getting another graphics card to run of my monitors and having my current one run the other I was thinking of getting another GT but I do have a gtx sitting around would they work together Also if you have any advice about changing motherboards and not having to re-install OS clean that would be great nbsp

A:Looking for a new Motherboard

Well you also made the mistake of buying the GT 640 because the gtx 260 is fair amount faster.
 

http://www.techspot.com/community/topics/looking-for-a-new-motherboard.205517/
Relevancy 23.22%

Hi, I'm building a budget gaming PC but I don't know what motherboard to get. Here's the parts I'm planning on buying:

Intel Core i5-3570
Corsair Builder Series CX 430
Radeon HD7850

A H77 board will do as the cost of a K cpu and Z77 board (I presume) would cost way more. I'm thinking something around the price of a Asus P8H77-V LE.

Thanks
 

A:What motherboard should I get for my build?

It matters on what brand you buy. Some H77 motherboards come close to low end Z77 boards. Also, the 3570K is just $20 more and allows for you to unlock your system fully as long as you have proper cooling.

If you would like, I can take a look at your build and recommend better components if I see it fit. Just provide me with a budget .
 

http://www.techspot.com/community/topics/what-motherboard-should-i-get-for-my-build.203630/
Relevancy 21.07%

Hi guys im new in the forum don t ON PC wont stay know PC wont stay ON if I can start threading right away but here goes My setup k stock ASROCK Z pro x gb of gskill ripjaw HX WD Black gb PC wont stay ON SG gb Shappire My problem started quite a while ago with another motherboard one day I started my PC and it just wouldn t boot it ran for about - sec and then it would shut off infinite loop So PC wont stay ON at the time I just swapped my HX psu for a temporary w one and it was all ok apart from having to take the gpu out since this psu wouldn t handle it Then that motherboard burned and I swapped it for a brand new one z pro At the same time as I got the new board I went to a electronic repair shop with my HX psu since I was sure it was broke And a week later they call me to go get it back and the guy tells me shes in perfect condition which was very awkward since ive been messing around with computers for years and I usually dont make this sorta stupid mistake I thought well maybe it was the previous board Even if she did work with the w PSU it didnt really make any sense but I thought wtv lets give it a try anyway Got home got it running and voila works perfectly For TWO days After those two days with a new board and the rest of the same components the PC went back to the same simptoms it would power on and off for seconds and loop and loop Again I switched to the old w psu and it works perfectly Went back to the store they tested it and swap some internal components just to keep it safe and deliver it to me saying it ran for days without a hiccup with HDDs and a bunch of different OS s If that even mattered So I got back home tested it and hurray its finally over its running perfectly and im playing a bunch of games without any problems But its been two days Wont boot LOOP LOOP Same old story HX wont work and im back to the w psu Any ideas Im out of options this makes sense Thanks in advance nbsp

A:PC wont stay ON

I would rather think the PSU is bad. Your best bet would be to invest in a new one. This more or less would save time and the problems you are having. Plus the expense of repair a PSU that keeps failing.
 

http://www.techspot.com/community/topics/pc-wont-stay-on.205436/
Relevancy 20.64%

Laptop wont load bios or OS Interesting wont load Laptop bios OS or issue here When I press the power button the HD activity led light comes on for just a second I feel the HD spinning up and running the fan kicks in and runs then nothing No Laptop wont load bios or OS leds flahing just power led no beeps no screen and no bios I v discharged static build up battery out power button held down quot and tried both mains amp battery to no effect There were no precursors to this issue So I can deduce the laptop is unable to complete POST in pre bios despite the lack of beeps yet can supply power to fan amp HD Now the GPU is Laptop wont load bios or OS GForce m GS aware of the issues with the xxx series I v kept the air flow clean and use a laptop cooler Possible suspect though it never ran hot and all worked fine till I turned on a couple of Laptop wont load bios or OS days ago Now I understood that a failure of the xxx series usually presented a degraded screen lines etc rather than failing post I m backed up and use my second laptop so nothing urgent just a oportunity to learn I am interested in hearing from hardware geeks and their thoughts nbsp

A:Laptop wont load bios or OS

Seem to have been redirected here for some unknown reason !!
 

http://www.techspot.com/community/topics/laptop-wont-load-bios-or-os.205327/
Relevancy 33.97%

My friend found this electronic sign. The ones with red leds that scroll a message across it. On the back is a connector marked keyboard. It looks like a Cat5 connector. Anyone know how that would work or what kind of keyboard/adapter he would use?
 

A:Electronic Sign Keyboard Connector

I know absolutely nothing about the Electronic Signs. The only thing I can do is share a link I found that may help. You can try Programming Alpha Signs Without a Keyboard which points to AlphaNet for Windows for programming software.
 

http://www.techspot.com/community/topics/electronic-sign-keyboard-connector.205333/
Relevancy 23.22%

Please suggest me a best motherboard (upto Rs. 6000) and a PSU for AMD FX-6300 processor.
 

A:Motherboard for amd fx-6300

Why not try the MSI Gaming 970 motherboard, its pretty inexpensive and a decent motherboard. Where do you shop?
 

http://www.techspot.com/community/topics/motherboard-for-amd-fx-6300.205255/
Relevancy 20.64%

My internet wont work, ive tried using both crome and IE but both browsers say that I am not connected to the internet despite the fact my computer says that I am connected to the internet. I know its not a network problem because my other devices are connecting fine. Also I tried connecting to the wifi at home and at school and it still does not work. My laptop is a HP ProBook 6390b and I am using windows 7. This problem started occurring after about 4 months disuse of my laptop which I think might be a factor as to why its not working. I have run windows updater and run a scan with my antivirus but still nothing helps. Thank you for any assistance in advance.
 

A:Internet wont work on laptop

Have you kept up and installed all the Windows 7 updates and are there any yellow (!) in the device manager?
 

http://www.techspot.com/community/topics/internet-wont-work-on-laptop.204944/
Relevancy 26.66%

About a week ago, our cable internet connection went out. Before I had a chance to reboot the modem & router, my 11 year old decided to completely reset the router to factory settings! Ugh! This caused several issues: my home network is now gone, only a unsecured factory network is available. When I try to plug my laptop into the router via ethernet cord (in order to login to router and setup secure network) my computer will not recognize the router and won't connect to internet. I tried troubleshooting with my cable provider and they say it's in my computer (IP address will not reset) and he recommended I replace my network card. However, today when I brought my laptop to work, it will instantly recognize the wifi at work. So is it really my network card that is causing issues? Please help, I'm desperate and not tech too tech savvy!

Details:
Linksys wireless router
Charter cable modem
Hp pavillion dv6 laptop with Windows Vista OS
 

A:Laptop won't connect to home wifi but will connect to work wifi

Did you figure this out?
 

http://www.techspot.com/community/topics/laptop-wont-connect-to-home-wifi-but-will-connect-to-work-wifi.204978/
Relevancy 20.21%

Hi can any one help I cant hear any sound on my laptop its all turned up but when I conect it to my tv the volumes fine but soon as I disconnet from the tv the sound ont go.
 

A:Audio wont work on asus x53u laptop

Did you fix this?
 

http://www.techspot.com/community/topics/audio-wont-work-on-asus-x53u-laptop.204577/
Relevancy 20.64%

Hi all,

I have a problem that I can't connect through wifi in windows vista home premium, but I can using LAN or using wifi in ubuntu. Please if can anyone help as it is urgent to me.
@jobeard
 

A:Can't connect through wifi but have a connection through LAN

see this thread and supply that data in your follow-up.
 

http://www.techspot.com/community/topics/cant-connect-through-wifi-but-have-a-connection-through-lan.205081/
Relevancy 23.22%

I have an old Acer Aspire m3100 desktop and the case to it is broken, I have another case for it but I do not have the installation manual to show me how to reconnect all of the connections from this other case. How can I get or find the diagram showing how to make all connections to this motherboard. I'm trying to restore this computer for my grandson? any help would be appreciated, I've tried contacting Acer but they won't help unless the computer is under warranty and their third-party support doesn't do hardware issues?? I also downloaded a manual from online but it doesn't show the right info.
 

A:Motherboard Installation manual

Check this is the right motherboard.

http://www.gigabyte.com/products/product-page.aspx?pid=2500#ov

The manual is available in the support and downloads section.

Case wiring is pretty standard in most cases (no pun intended). Any details you have about the case your switching to would be helpful.

Motherboards mostly have the names of sockets screen printed next to them.
 

http://www.techspot.com/community/topics/motherboard-installation-manual.205022/
Relevancy 30.53%

I'm a new Plusnet customer and I cannot connect to the internet using wifi I just get a page saying the broadband is down. So I tried using an ethernet cable and after manually setting this up I can use the internet. I accidentally disconnected the cable yesterday but the internet didn't fault, it's now working wirelessly. I can connect to the wifi using my mobile and iPad but I cannot connect to the internet. A new router has been sent and the problem still persists, a bt engineer has also visited but cannot find a solution.

Can anybody please help me?
 

A:I can't connect to wifi but connect with an Ethernet cable works, even when it isn't plugged in

It gets confusing as to which device is being used so as a guideline
disable one or the other (wifi vs wired) and don't allow both to be active at the same time. Technically, which ever device gets an IP address from your router will become the gateway to your ISP - - ignoring the connectivity of the second device to access your router.

With a laptop, we just toggle the keyboard to enable/disable wifi and the wired is easy - - just pull the cable out.

create a desktop shortcut to \windows\system32\devmgmt.msc
to control the devices (needs admin access)
expand [+] network adapters and you'll see the list
mine are

Dell Wireless 1502 ....
Realtek PCIe FE Family Controller
Just right-click->disable and you can always right-click->enable

The png posted shows both are enabled and the wired has the gateway.
If the cable is disconnected, this is quite impossible.

SO, first control which device is to be used and then make the connection.
 

http://www.techspot.com/community/topics/i-cant-connect-to-wifi-but-connect-with-an-ethernet-cable-works-even-when-it-isnt-plugged-in.204891/
Relevancy 22.79%

Hi, I just installed a gigabyte ga-z77x-d3h into my system (i5 3570), and even after reinstalling windows the computer is very glitchy, it takes ages to come on, freezes, and usb devices don't work half the time.

I'm thinking it's a dodgy motherboard. Any ideas?
 

A:System is very glitchy after installing new motherboard

Actually my first post was wrong, (this is someone else's computer) reinstalling windows fixed the glitches it just pauses on the windows logo for about five minutes before booting up.
 

http://www.techspot.com/community/topics/system-is-very-glitchy-after-installing-new-motherboard.204643/
Relevancy 22.79%

I got this desktop computer that has a Asrock board in it Model # FM2A75M-DGS and it comes up with the boot screen and I try to get in to boot settings or anything and it wants a password. I have no clue what the password is and I need help to see if it can be reset. I have looked on the internet everywhere and have had no luck. If I pull the battery will that reset it......help me please. Thanx
 

A:Forgot Password On Asrock Motherboard

Removing the motherboard battery and waiting a couple minutes before replacing it should reset it to where you can gain access again. It should help you. If not then reset your jumper to clear the CMOS. You can get the jumper resetting instruction in the motherboard manual.
 

http://www.techspot.com/community/topics/forgot-password-on-asrock-motherboard.204604/
Relevancy 20.64%

As the title states I cant seem to get my monitor to turn on when I put ram in slots 3-4.. I currently have 2x2gb ram installed and im trying to install 2x1gb more(in slots 3-4)
both sets are matching pairs

Any suggestions?

CPU: amd phenom ii x4
GPU: Radeon hd 7700
MOBO: Gigabyte M720-US3
64 bit*
 

A:Monitor wont turn on with ram in slots 3-4

What's the timings, frequency, and voltage on the RAM sets?

Also confirming, that you are putting them into matching ram slots? 3-4 tells me nothing and can be misunderstood anyway.
 

http://www.techspot.com/community/topics/monitor-wont-turn-on-with-ram-in-slots-3-4.204476/
Relevancy 22.79%

Hey guys just another quick question about my motherboarding and CPU. Currently I am not satisfied with my CPU at all and I'm thinking of upgrading to this
http://www.novcomputer.bg/bg/i5-4670-34g-6mb-box-lga1150.html
and my current motherboard is this
http://www.ecs.com.tw/ECSWebSite/Product/Product_Detail.aspx?DetailID=1091
on that ^ website it says that my current motherboard supports the CPU that I linked, however my PC technician says that I also have to upgrade to a newer motherboard that can support that CPU that I want. My question is is that really the case? Can my motherboard run that CPU or is it really too old?
Again thanks for reading/helping
 

A:Upgrading CPU, question about motherboard compatability

Vidosoli said:





Hey guys just another quick question about my motherboarding and CPU. Currently I am not satisfied with my CPU at all and I'm thinking of upgrading to this
http://www.novcomputer.bg/bg/i5-4670-34g-6mb-box-lga1150.html
and my current motherboard is this
http://www.ecs.com.tw/ECSWebSite/Product/Product_Detail.aspx?DetailID=1091
on that ^ website it says that my current motherboard supports the CPU that I linked, however my PC technician says that I also have to upgrade to a newer motherboard that can support that CPU that I want. My question is is that really the case? Can my motherboard run that CPU or is it really too old?
Again thanks for reading/helping Click to expand...

No, that motherboard is LGA 1156 while the i5 4670 is LGA 1150. You would need a new motherboard to go with that CPU>
 

http://www.techspot.com/community/topics/upgrading-cpu-question-about-motherboard-compatability.204453/
Relevancy 20.64%

My laptop keeps saying default gateway not accessible even though it has all the routers information
 

A:Laptop won't connect to wifi

Give a little more information. Such as what OS. Make and model so forth. This way someone can help you.
 

http://www.techspot.com/community/topics/laptop-wont-connect-to-wifi.204349/
Relevancy 34.83%

Hi I have small two wired connector with speaker written on it came with the new case,I have been told this fits on where the front panel connectors JFP1 but the pins are all taken up.There is a JFP2 with speaker in the manual have tried this no beep there is some jumpers something to do with wakeup JUSB PW1 and JUSB PW2 ,as I am not sure if one of these will enable the speaker or mess the motherboard up I have not touche them.regards Martin
 

A:Beep connector

What is the make and model of the motherboard?
 

http://www.techspot.com/community/topics/beep-connector.204297/
Relevancy 23.22%

Hi all,

I have heard of somethings like computer manufacturer and motherborad manufacurer. For example some time ago, when I had problem with my desktop PC, some asked me what's your computer manufacturer and motherborad manufacurer?
what's the difference between these two please?
 

A:Computer/motherboard manufacturer

Computer manufacturer Is most of the time is Dell, Hp,Compaq, Ausu are a few.
Motherboard manufacturer . Asus, Gigbyte, Asrock. Msi, Are a few. This is what they are referring to. When they ask you those Questions .
 

http://www.techspot.com/community/topics/computer-motherboard-manufacturer.204218/
Relevancy 41.28%

So my laptop will not connect to the internet only by the ethernet cable. Ive made sure my wifi is on but for some reason everytime I click troubleshooting it will only tell me to try to connect to the ethernet cable. I tried to find different interney connection or try to disconnect to my router but that option does not even show up.

Ive gone through device manager n unstall things like the newtwork adapter of course after I restrted the computer itll reinstall it. Ive tried the options of restarting the router try to turn off the wifi restarting a an d reconnecting. Please help!! Lol
 

A:My laptop wont connect to the internet

I have a laptop and use wired connection when at home. Laptops typically have an enable/disable key or switch for the wifi - - on my Dell, <fn>F2 toggles wifi on/off.
I normally run with it off and the device manager looks like this



EVEN when F2 has it disabled! Notice, no red/yellow flags because it's just fine.

The system tray (for a wired connection) looks like



and IF I enable wifi, it changes to



*** SO BE SURE your wifi is 'enabled' (that is not the same as the device mgr enbled)
 

http://www.techspot.com/community/topics/my-laptop-wont-connect-to-the-internet.204212/
Relevancy 23.22%

In hardware monitor, reading 13.2v on the 12v line.

PSU: http://www.newegg.com/Product/Product.aspx?Item=17-151-107

MOBO: http://www.newegg.com/Product/Produ...30790&cm_re=970_gaming-_-13-130-790-_-Product

Should I be worried? BTW im already about to RMA the motherboard because of broken sound. (might these be related?)
bbasically should I be worred about the immediate health of other parts or something
 

A:12v on motherboard reading 13.2v

What does your boards BIOS voltage monitoring read ? When you say hardware monitor I assume you are talking about the utility?
If this is the case then HW Monitor can have reporting issues with certain chipsets and boards.
If you're reading the voltage from the BIOS's hardware monitor then it could be a faulty voltage sensor (likely), or a PSU running out of specification. Checking the PSU shouldn't present much difficulty if you have access to a multimeter or just have an electrician test the output.
 

http://www.techspot.com/community/topics/12v-on-motherboard-reading-13-2v.204199/
Relevancy 22.36%

Hello to all I m going to install Win XP properly port The ps/2 of doesn't work the motherboard on my computer I had win but had some problem with installing the HP printer on it and so I decide to install XP because that printer seems to be installed properly The ps/2 port of the motherboard doesn't work properly on XP Now When I put the XP CD on the CD driver it says press a ker to boot from CD and I press the Enter key now the keyboard works after that within installation time when that I should press Enter to install XP this time the keyboard doesn t work My guess is that the ps port of the case has problem it s old and somewhat has been broad Now what is the solution in your point of The ps/2 port of the motherboard doesn't work properly view please My system manufacturer is quot ECS quot and the system model is quot pl-A quot PS there are two black amp white screens which mobo shows First screen shows the amount of RAM the model of CPU the IDEs and info like these which is common for first screen But the here when I want to enter to BIOS by pressing Del key it seems that keyboard doesn t work so it doesn t go to bios The second black amp white screen shows fewer info and it says quot Press shift-F to configure and when I press these two I can to enter to an environment that seems to not be the BIOS the keyboard here WORKS It has very few options And apparently doesn t have options of manipulating the keyboard settings nbsp

A:The ps/2 port of the motherboard doesn't work properly

No idea!!?
 

http://www.techspot.com/community/topics/the-ps-2-port-of-the-motherboard-doesnt-work-properly.204104/
Relevancy 22.36%

I ve got this legendary socket motherboard DFI LP UT SLI-DR Expert chipset nForce SLI almost new only LanParty - UT using BIOS DFI Del motherboard enter Cannot key Expert SLI-DR NF4 one SATA port is somewhat messed up missing those plastic parts from both sides bought this baby really cheap from well known Romanian e-bay like site okazii ro and I put it on my FX- dual core yeah THAT one and some KINGSTON value memory and tried to boot my rig Here is my problem now this board is Cannot enter BIOS using Del key - DFI LanParty UT NF4 SLI-DR Expert motherboard working those red diagnostic LEDS start next only one left so no quot LEDs of death quot syndrome for me and the onboard speaker beeps ONCE which I know is always a good thing but I cannot enter BIOS to setup as I need Del key on my PS keyboard is NOT working as it should I press the key and the result is nada nothing first I see the boot logo from Cannot enter BIOS using Del key - DFI LanParty UT NF4 SLI-DR Expert motherboard DFI after that Cannot enter BIOS using Del key - DFI LanParty UT NF4 SLI-DR Expert motherboard I see this error message quot CMOS checksum error - defaults loaded press F to continue or Del to enter setup quot and when I press Del I get nothig and when I press F key sometimes I see this message quot Verifying Pool Data and Backup CMOS OK quot and other times I see quot Sil SATA RAID Press Ctrl-S or F to enter RAID utility quot One more thing to add is that I can actually use boot menu selection using Esc key to selct HDD CD-ROM or some other option and this board actually can boot using CD DVD I already tried UBCD rescue CD and some Linux live distros to see if it s not a problem with my FX- processor and I m happy that it is working well is all good no problem here actually I ve seen it s name and working frequency Mhz at POST please help me to solve this problem with my mobo nbsp

http://www.techspot.com/community/topics/cannot-enter-bios-using-del-key-dfi-lanparty-ut-nf4-sli-dr-expert-motherboard.204105/
Relevancy 21.93%

Had an AMD HP G62-227CL laptop that overheated and required motherboard replacement with similar Intel motherboard. Old board clocked at 2.2 MHZ .. new one is 2.0 MHZ.
Board I got from Ebay works but now computer believes that it is a Compaq CQ42 Laptop. Do not know the model number, which I would need on HPs site to download BIOs upgrades.

Is there a way to tell which bios I need or what model I now have?

Thank you,

Steve
 

A:Replaced Failed Motherboard.. now how do I determine model number and which BIOS to download?

Finding a bios update rather then the one hp would give for this board. Would be next to none.
You could check a few of the support pages for this model. Which their are a lot Of
Maybe find out the motherboard you have bought.

HP Support, Drivers, Contact and Help Forums | HP Ū Support
 

http://www.techspot.com/community/topics/replaced-failed-motherboard-now-how-do-i-determine-model-number-and-which-bios-to-download.203956/
Relevancy 20.21%

I have had an HP laptop for 1 year and it has worked on the internet perfectly fine. My wireless router turned off one day while I was using the internet and after it turned back on my laptop would not connect back to the wireless. I have tried connecting my laptop to hotspot from my phone and tried connecting it to the internet modem with a cord but neither would work. Please Help!
 

A:HP laptop will no longer connect to the internet

You may need to buy an external WiFi adapter like this:
http://www.newegg.com/Product/Product.aspx?Item=N82E16833320176
 

http://www.techspot.com/community/topics/hp-laptop-will-no-longer-connect-to-the-internet.203700/
Relevancy 20.21%

So I have windows 7 installed on my pc ..... I cant hear any sound from my headphones or speakers whether plugged into the front or rear panel. and also windows shows that there are headphones plugged into the front panel. maybe that's the reason I cant hear any sound....but I tried all possible ways....also disconnected the front panel from the motherboard but still it says its connected.
 

A:Front audio jack panel wont disconnect in any way

Have you checked out the Sound section in Control Panel. Also check Device Manager.
 

http://www.techspot.com/community/topics/front-audio-jack-panel-wont-disconnect-in-any-way.202869/
Relevancy 40.42%

I built a gaming PC and it wont connect to the monitor. Also the keyboard and mouse won't turn on.
My graphics card is a NVIDIA Geforce GTX 700
 

A:Built own computer, but it wont connect to monitor

Could you please provide the specs for your build? Need to list the exact parts you used, including make and model. It makes things easier to help with diagnosing your issue or issues.
 

http://www.techspot.com/community/topics/built-own-computer-but-it-wont-connect-to-monitor.203102/
Relevancy 23.22%

I was planning on using the lowest i5 processor but because of the refresh I lost the older ones.
The ones that are available are:
Intel Core i5 4460 (3.2GHz HD4600 6MB Cache) Quad Core
Intel Core i5 4590 (3.3GHz HD4600 6MB Cache) Quad Core
Intel Core i5 4570S (2.9GHz HD4600 6MB Cache) Quad Core
Intel Core i5 4670 (3.4GHz HD4600 6MB Cache) Quad Core
Intel Core i5 4690 (3.5GHz HD4600 6MB Cache) Quad Core
Intel Core i5 4670K (3.4GHz HD4600 6MB Cache) Quad Core
 

A:What CPU's are compatible with the MSI B85-G43 Gaming Motherboard

http://www.msi.com/product/mb/B85G43.html#/?div=CPUSupport


Code:
Core i7 [ 4771,4770T,4770S,4770K,4770,4765T ]
Core i5 [ 4670T,4670S,4670K,4670,4570T,4570S,4570,4440S,4440,4430S,4430 ]
Core i3 [ 4340,4330T,4330,4130T,4130 ]
Pentium [ G3430,G3420T,G3420,G3220T,G3220 ]
Xeon [ E3-1240V3,E3-1230V3,E3-1220LV3 ]
 

http://www.techspot.com/community/topics/what-cpus-are-compatible-with-the-msi-b85-g43-gaming-motherboard.202560/
Relevancy 22.36%

This is the link of my motherboar....... http://vr-zone.com/articles/xfx-unveiled-intel-g31-based-xg31i-board/6218.html?doc=6218

I want to know whether I can use a DDR3 Graphics card on my DDR2 motherboard and if its certain to work. Please provide detail and whether it'll be compatible.
 

A:Can a DDR3 graphics card run in a DDR2 Motherboard?

The DDR2 slots on the motherboard refer to the desktop RAM sticks. GDDR3 on a graphics card doesn't make any difference, it's the connector (PCI Express 2.0 probably) that slots into the mobo.
 

http://www.techspot.com/community/topics/can-a-ddr3-graphics-card-run-in-a-ddr2-motherboard.202813/
Relevancy 20.21%

As the title says I'm trying to connect my HP3050 printer to my computer wirelessly. Problem is I get this:


The story goes that in the past week or so we swapped to a different internet provider and have swapped out the old modem/router for one that the new company has provided.
Prior to this no problems at all.

How do I counter this, I.e. remove the problem of what appears to be the availability of two routers, the new and the old?

Thanks,
Tom.
 

http://www.techspot.com/community/topics/unable-to-connect-my-hp3050-printer-wirelessly.202822/
Relevancy 18.06%

Hi all

I have got a new desktop PC, which works fine with Ethernet but I am not able to connect through wireless.When I tried to connect to the broadband, it says error connecting to the Broadband connection
Error 651: The modem (or other connecting device) has reported error. However, same comnnection works very well with my vista home premium Dell Laptop.

Thanks in advance
Pxray
 

A:HP Pavillion PC with windows 8 works ethernet works well but not able to connect through wireless

How to reset TCP/IP by using the NetShell utility
 

http://www.techspot.com/community/topics/hp-pavillion-pc-with-windows-8-works-ethernet-works-well-but-not-able-to-connect-through-wireless.202705/
Relevancy 19.35%

Whenever I unplug from the router and go upstairs, I can't connect to my wi-fi. The problem also persists downstairs unless I am connected by ethernet. It's been happening for about 2 days. At first the wi-fi would jump in and out randomly and quickly but now it simply wont connect. Is it a virus or how can I fix it?
 

A:Wifi doesn't connect unless directly connected to router by ethernet cable

You might just need to restart your router / WiFI AP to resolve that issue.
 

http://www.techspot.com/community/topics/wifi-doesnt-connect-unless-directly-connected-to-router-by-ethernet-cable.202219/
Relevancy 19.78%

Hi all,
I am writing because from few weeks I can not solve this problem of connection:
if the computer is in safe mode there aren't problems, while in normal mode, the following programs don't connect / update:
Internet Explorer 11, Dropbox, Malwarebytes, Mozilla Thunderbird, Flash player update, Java update, StartUp Delayer.

While Firefox, Chrome, Emsisoft Anti-Malware (Antivirus), Online Armor (firewall), and other programs work and update normally.

I've tried and tried various "solutions" found in the Web and in the Forums, but without any result.

I noticed that Dropbox and StartUp Delayer "tell" me that's is probably a Proxy problem.
I honestly have never used a proxy, and tried in every way possible to disable any proxy, but nothing changed, same issue.

I tried uninstalling antivirus and firewall, but the issue still remain, the same as resetting the connection settings and even Windows Firewall (which is usually disabled).

This problem is present both with ethernet connection and wireless.
I use a HP dv6000 notebook with Windows Professional 64bit.

I thank you if you can help me, because I really don't know how to fix this problem =/

Thank you,
Elia
 

A:Windows 7 - only connect to internet in Safe Mode with some softwares

I MIRACULOUSLY solved this situation!

Among the many details I forgot to say that for the connection I use a router, and after several attempts to copy the settings from a computer connected to the same network, I tried to enter the DNS entry of the parameter TCP/IPv4 (in connection properties) 192.168.1.1 and 192.168.1.7 ..and all began to work perfectly.

I can not explain, howeve, why the other computer works even without these two values.

But I'm happy that this (strange) situation is solved, and hope this can help someone else

Have a nice day,
Elia
 

http://www.techspot.com/community/topics/windows-7-only-connect-to-internet-in-safe-mode-with-some-softwares.202509/
Relevancy 22.79%

Hello My sound chip on my board was blew for no reason bad thing only being a month old bored and I am not waiting days to rma it and for me to get it back anyway I managed to pick up a old sound card not sure on the model Motherboard? Work. Not Maybe Did Sound Card that worked fine for three days then stopped outputing audio so I bought a sound card intex cmi that did not have the bit wndows dirvers and everytime I turned the computer off the machine would not detect the card I then I have to press the reset button or turn the system a few times to get the card to be recognized again and I could not also find the drivers for the OS Sound Card Did Not Work. Maybe Motherboard? I checked at the back of the cards box and it says bit pci bus master What does the mean could that be that the card was not compatible for the stystem or could it be the motherboard I tried a nvidia video card in the Sound Card Did Not Work. Maybe Motherboard? PCI-E slot and the card works fine with no faults The sound card was using the PCI slot and I tried every PCI slot My Motherboard asrock fm a x extreme Thanks nbsp

A:Sound Card Did Not Work. Maybe Motherboard?

I tested in a very old card from 2001 or 2004 something like that and it appears there's power going through the card so that's the plus.
Maybe it's because I'm using old crap and the sound card model is old?
 

http://www.techspot.com/community/topics/sound-card-did-not-work-maybe-motherboard.202240/