Windows Support Forum

My internet will only work through ethernet cable not wireless

Q: My internet will only work through ethernet cable not wireless

hi there my wireless through cable work will not My only ethernet internet internet was My internet will only work through ethernet cable not wireless running fine until yesterday when I tried to connect to the internet the message quot windows can t communicate with the device or resource primary dns server quot came up I followed all methods on this website http answers microsoft com en-us w -b d ec fae but none of them worked for me I then returned my laptop to factory settings in the hope it will work but that didnt not work I then realised it works through the ethernet cable but not wireless I ran ipconfig all with my ethernet cable in and this is the result SOMEONE PLEASE HELP ME THANKYOU Windows IP Configuration Host Name Nida-TOSH Primary Dns Suffix Node Type Hybrid IP Routing Enabled No WINS Proxy Enabled No Wireless LAN adapter Wireless Network Connection Connection-specific DNS Suffix Description Realtek RTL CE Wireless LAN n PC I-E NIC Physical Address D -DF- A-EB- -B DHCP Enabled Yes Autoconfiguration Enabled Yes Link-local IPv Address fe d fccc e c eb Preferred IPv Address Preferred Subnet Mask Lease Obtained October Lease Expires October Default Gateway DHCP Server DHCPv IAID DHCPv Client DUID - - - - -EB- A- A-B - -F -D - -E DNS Servers NetBIOS over Tcpip Enabled Ethernet adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description Realtek PCIe FE Family Controller Physical Address B - -F -D - -EF DHCP Enabled Yes Autoconfiguration Enabled Yes Tunnel adapter isatap EEB-B - C-AC - CEB F Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter Local Area Connection Connection-specific DNS Suffix Description Teredo Tunneling Pseudo-Interface Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes IPv Address ef fb affc eb Pre erred Link-local IPv Address fe affc eb Preferred Default Gateway NetBIOS over Tcpip Disabled Tunnel adapter isatap DF D AB- BF- FA - CB -DFA C Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes nbsp

Relevancy 100%
Preferred Solution: My internet will only work through ethernet cable not wireless

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: My internet will only work through ethernet cable not wireless

There may be an issue on the ISP side or router side since restoring to defaults didnt help. Or it could be an issue with the network adapter. Or it could be an issue with the firewall.

Try downloading running these tools (download via ethernet, run on wireless): Network Fix-It Tool (right click on the internet bars on the task bar in the bottom right hand side of the screen, and click "troubleshoot network...") and Firewall Fix-It Tool.

Did you install anything on your PC before this happened? Did Windows install any updates?

Try disabling your AntiVirus. That may be the issue. I doubt it though.

Tell me if any of these solutions help.

http://www.techspot.com/community/topics/my-internet-will-only-work-through-ethernet-cable-not-wireless.197067/
Relevancy 102.34%

hi there my internet was running fine until yesterday when i tried to connect to the internet the message quot windows can t communicate with the device or resource primary dns server quot came up i followed all methods on this website http answers microsoft com en-us evice-or c d- b- c- -b d ec fae but none of them worked for me i then returned my laptop to factory settings in the hope it will work but that didnt not work i then realised it works through the ethernet cable but not wireless i ran ipconfig all with my ethernet cable in and this is the result SOMEONE PLEASE ethernet cable will only not internet wireless My work through HELP ME THANKYOU Windows IP Configuration Host Name Nida-TOSH Primary Dns Suffix Node Type Hybrid IP Routing Enabled No WINS Proxy Enabled No Wireless LAN adapter Wireless Network Connection Connection-specific DNS Suffix Description Realtek RTL CE Wireless LAN n PC I-E NIC Physical Address D -DF- A-EB- -B DHCP Enabled Yes Autoconfiguration Enabled Yes Link-local IPv Address fe d fccc e c eb My internet will only work through ethernet cable not wireless Preferred IPv Address My internet will only work through ethernet cable not wireless Preferred Subnet Mask Lease Obtained October Lease Expires October Default Gateway DHCP Server DHCPv IAID DHCPv Client DUID - - - - -EB- A- A-B - -F -D - -EF DNS Servers NetBIOS over Tcpip Enabled Ethernet adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description Realtek PCIe FE Family Controller Physical Address B - -F -D - -EF DHCP Enabled Yes Autoconfiguration Enabled Yes Tunnel adapter isatap EEB-B - C-AC - CEB F C A Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter Local Area Connection Connection-specific DNS Suffix Description Teredo Tunneling Pseudo-Interface Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes IPv Address ef fb affc eb Pref erred Link-local IPv Address fe affc eb Preferred Default Gateway NetBIOS over Tcpip Disabled Tunnel adapter isatap DF D AB- BF- FA - CB -DFA C D CA Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - My internet will only work through ethernet cable not wireless - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes nbsp

A:My internet will only work through ethernet cable not wireless

The DNS settings you have appear to be for Virgin Media in UK

who is your ISP

can we see an ipconfig /all when you are connected by cable and working please

you may want to check you DNS settings and see if changing those to use google open DNS resolves the issue

Google public DNS
Note using google public DNS servers from outside the US may actually slow performace - so use the following as a test to identify DNS issues - if these resolve the issues , then we need to investigate further to optimise the use of DNS
Google public DNS
https://developers.google.com/speed/public-dns/

Theres also a link on how to setup those DNS IP address up on a PC
http://code.google.com/speed/public-dns/docs/using.html

Then once you have set up those DNS entries

Flush & register DNS

Hold the Windows key and press R, then type CMD then press Enter to open a command prompt box (A new dialogue box - black with white font, will appear on screen ):
In the command prompt window that opens, type the following commands:

Ipconfig/flushdns
ipconfig/registerdns

If you receive the message
The requested operation requires elevation.
Then please open the command prompt as administrator
Start> All Programs> Accessories and then right click on Command Prompt, select "Run as Administrator" to open a command prompt.

now type the command again
 

https://forums.techguy.org/threads/my-internet-will-only-work-through-ethernet-cable-not-wireless.1110567/
Relevancy 100.19%

OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM) i3 CPU M 380 @ 2.53GHz, Intel64 Family 6 Model 37 Stepping 5
Processor Count: 4
RAM: 3766 Mb
Graphics Card: Intel(R) HD Graphics, 1755 Mb
Hard Drives: C: Total - 597065 MB, Free - 490266 MB;
Motherboard: Acer, Aspire 5742
Antivirus: AVG Anti-Virus Free Edition 2012, Not Updated

Please help me, I don't know what to do.
My internet connection suddenly stopped working and I don't know how to fix it, I've restarted the computer and unplugged the modem, amongst other things, but nothing seems to be working.
The only way I can have internet connection is with the ethernet cable, but it doesn't work without...
 

A:Solved: Can only connect to internet with ethernet cable, does not work wireless

you have marked this - solved - has the problem been resolved now

if not
have you made sure the wireless is switched on - often there's a physical switch or a combination of the FN + one of the F keys to control the wireless

post an ipconfig /all and xirrus screen shot
------------------------------------------------------------------------
ipconfig /all
If you cannot access the internet with this PC, then you will need to paste the results into something like notepad and then copy onto a machine that can access the internet and post the results in a reply here.
Save the file to a USB flash drive or other removable media. Plug it into the working computer with internet access and copy the file and paste here.

We would like to see the results from an ipconfig /all - post back the results in a reply here.

Hold the Windows key and press R, then type CMD then press Enter to open a command prompt box
(A new dialogue box - black with white font, will appear on screen ):

In the command prompt window that opens, type the following command:

Note that there is a space before the /ALL, but there is NOT a space after the / in the following command.

ipconfig /all > network.txt & network.txt

It will export the results into notepad and then automatically open the notepad and display on your screen.

Now all you need to do is copy and paste those results into a reply here
to do that:
From the notepad menu - choose Edit - Select all
all the text will now be highlighted
Next
From the notepad menu - choose Edit - Copy

Now go back to the forum - goto the reply and then right click in the reply box and paste the results.
The results from the notepad should now appear in the forum reply.
------------------------------------------------------------------------

------------------------------------------------------------------------
Run Xirrus Wi-Fi Inspector
Download and install
If you cannot access the internet with this PC, then you will need to copy the program across to the faulty PC
Save the file to a USB flash drive or other removable media. Plug it into the working computer with internet access and copy the file and install the program.
You will now need to take a screen shot and copy that back to the working PC and attach the screen shot in a reply on the forum here.

http://www.xirrus.com/Products/Wi-Fi-Inspector.aspx
Direct link to the program is here http://info.xirrus.com/Wi-FiInspectorConfirmation.html

{If the above link does not work heres another link http://www.pcworld.com/downloads/file_download/fid,77196-order,4/download.html}

Then run and install the program - on a wireless enabled PC/Laptop
if you get an error - You need will need to have NET Framework installed for the WiFi Inspector to function.

Run the program

A user guide is available here http://www.xirrus.com/cdn/pdf/Xirrus-Wi-Fi-inspectorguide-1-2-1-RevB-6.aspx

post a screen shot of the program running.
if there are a lot of networks showing can you click on "networks" top lefthand area - so we can see all the network information.

post which SSID name is yours, its located in the list, under network "Adapter Name" (1st column)

To post a screen shot of the active window.
1) hold the Alt key and press the PrtScn key. Open the Windows PAINT application (Start> All Programs> Accessories> Paint) and Paste the screen shot. You can then use PAINT to trim to suit, and save it as a JPG format file.
OR
2) if you are using Vista/Windows 7 you can use the "snipping tool" which is found in Start> All programs> Accessories> Snipping Tool

To upload the screen shot to the forum, open the full reply window ("Go Advanced" button) and use the Manage Attachments button to upload it here.
Full details are available here http://library.techguy.org/wiki/TSG_Posting... Read more

https://forums.techguy.org/threads/solved-can-only-connect-to-internet-with-ethernet-cable-does-not-work-wireless.1067146/
Relevancy 86.86%

I have an Aspire one NAV50 with Windows 7 starter.

One time, when I turned it on, The icon for wireless connection doesn't appear anymore. Every time I try troubleshoot it, it would just say that there is an ethernet cable unplugged. And so, I connected it into the ethernet cable and it works fine. But when I tried it again on the wireless connections, it doesn't locate to any wireless connection.

I've tried the ff on my laptop:

restart
update
scan the laptop with MalwareBytes
Fn+f2
by the way, last night, when I turned on again the laptop, the wireless connections can already be found. However, after few minutes, it went back to being unlocated again.
 

A:Laptop would work on ethernet cable not on Wireless Connections

I had doubt the Starter supports the Wireless connecting but since you say " the wireless connections can already be found.", so probably it's possible.
In this case and at the moment the thing I'm thinking about is the driver. Try to update its driver for wireless connecting. (You've said the 'update', but update of what?).
 

http://www.techspot.com/community/topics/laptop-would-work-on-ethernet-cable-not-on-wireless-connections.201158/
Relevancy 86.86%

I have a combination modem router supplied by my internet service My main floor desktop computer is second plugged Solved: ethernet Wireless in work when cable won't connected directly via Ethernet cable Two laptops an ipad and a couple of TV s connect wirelessly I have Solved: Wireless won't work when second ethernet cable plugged in a large house with an office in the basement which is pretty much underground and on Solved: Wireless won't work when second ethernet cable plugged in the other end of the house so I recently ran a second Solved: Wireless won't work when second ethernet cable plugged in Ethernet cable from the upstairs modem router to a desktop computer in my downstairs office The connection itself worked fine I did notice however that my wireless connections would not work when the second Ethernet cable was plugged into the modem router When I unplugged it wireless started working again Could the problem be with the Ethernet cable It is a CAT e cable which I made myself since I needed a custom length It is my first one so of course I am doubting myself It works fine except for the problem it creates with my wireless devices My level of expertise is a little more than beginner but I m not quite sure I would call myself intermediate yet either nbsp

A:Solved: Wireless won't work when second ethernet cable plugged in

Check the settings for the ethernet and wireless devices in that basement desktop.

Some computers will disable one device when the other device is being used.

TerryNet and etaf and a few others are the networking experts here, so one of them will probably jump in to help you.

--------------------------------------------------------
 

https://forums.techguy.org/threads/solved-wireless-wont-work-when-second-ethernet-cable-plugged-in.1151157/
Relevancy 84.28%

hello Recently my uncle redid my other laptop to its original out-of-the-box state due to slowness Afterwards when my father plugged in the ethernet cable of Motorola s SBV SURFboard Cable Modem we use the optimum service into the computer the computer icon at the bottom right of the I internet connect ! S P E A H when work L cable even does not ethernet P E the L E screen indicated that the network was unidentified and has only local connections---therefore no internet On the laptop I m on right now the network is correctly recognized P L E A S E H E L P ! internet does not work even when I connect the ethernet cable and has both local AND internet connections Why is that I concluded that since the other laptop is quot redone quot then I must reinstall the installation cd of the modem and I did today All went well in the installation process until the near end where the cd automatically checked to see how the connection was btw the comp and modem It resulted with an error stating something like that invalid or something I forgot Thus my installation attempts of the modem on the other laptop failed I tried to reboot both the comp and modem but still failed I don t understand Why is there limited connectivity I don t even have perfect wireless connectivity I mean both of my laptops have the wireless capability and I can go around the house with the working one and find linkys with one bar of signal But I don t have the wireless modem or something that gives stable wireless connectivity to either of them---only the motorola modem that gives internet to only of the right now What should I do The solution shouldn t be too difficult I am quite young and did my best to solve this problem So I now await for the knowledge of you professionals to aid me thank you nbsp

A:P L E A S E H E L P ! internet does not work even when I connect the ethernet cable

You want to first establish a connection from the laptop to the Motorola modem, with the Linksys router out of the loop. Is the laptop running Windows Vista or XP? When you go to Network Connections or Network and Sharing Center, do you see a LAN?

If you are connecting via an ethernet cord to a cable modem, then you would not need to install any modem. The disk you have for your Motorola modem may be for installing USB drivers in case you were using a USB cable.
 

https://forums.techguy.org/threads/p-l-e-a-s-e-h-e-l-p-internet-does-not-work-even-when-i-connect-the-ethernet-cable.837566/
Relevancy 82.99%

just yesterday everything was working fine then i got disconnected from the internet i checked through ethenet I was able to connect but when i plugged in the cable to wifi router it did not connect to the internet.
help.
 

Relevancy 82.99%

Hi all I am running an IBM T P with Windows a Cisco Router quot linksys E quot My wireless has been running fine for the last few years win xp and win Today I wanted screwed internet? cable ethernet up wireless to try something I knew it wouldn't work but figured what the hell quot I plugged in an ethernet cable ethernet cable screwed up wireless internet? and hooked it up to an old PC to show a friend that you could not just plug this cable in and access another computer Well I proved I was right but unfortunately I also screwed something up ethernet cable screwed up wireless internet? in my laptop IBM now I can connect to my network I quot see quot the network I am connected to it excellent range etc but no internet connection now I know its not my router or nothing cuz my other laptops and pc's are all working fine its not the range since I have it now sitting literally next to my router I tried to recycle router and cable modem I tried restarting ugh HELP I THINK somehow windows is still looking for this ethernet connection anyone have a clue of what the heck happened here thank you so much in advance

A:ethernet cable screwed up wireless internet?

  
Quote: Originally Posted by rockergal


Hi all,

I am running an IBM T60P. with Windows 7. a Cisco Router "linksys E3000"
My wireless has been running fine for the last few years. (win xp and win 7)
Today I wanted to try something (I knew it wouldn't work but figured what the hell" I plugged in an ethernet cable and hooked it up to an old PC to show a friend that you could not just plug this cable in and access another computer. Well I proved I was right, but unfortunately I also screwed something up in my laptop (IBM)
now I can connect to my network, I "see" the network, I am connected to it, excellent range etc, but no internet connection.

now I know its not my router or nothing cuz my other laptops and pc's are all working fine,
its not the range since I have it now sitting literally next to my router)
I tried to recycle router and cable modem
I tried restarting
ugh... HELP!!!

I THINK somehow windows is still looking for this ethernet connection.
anyone have a clue of what the heck happened here???

thank you so much in advance


Open an command prompt and issue the command ipconfig /all and post the output.

Open Network and Sharing center and select the Troubleshoot Problems at the bottom of the Window. Post results, thanks.

http://www.sevenforums.com/network-sharing/91741-ethernet-cable-screwed-up-wireless-internet.html
Relevancy 82.99%

I have a compaq Laptop HP F running windows vista bit about years old and have had the same internet issues since I bought the dame thing I have searched the web for hours trying to find the answers made some changes but still have the same problems I have turned off all security programs downloaded drivers applied a fix patch from Microsoft enabled some functions that cable wireless bye No or internet Ethernet connection were disabled all to know avail I can connect at work via No internet connection bye Ethernet cable or wireless cbl at a friends house cbl and at home via neighbors wireless I cannot connect to my roommates Ethernet cable or wireless router running on windows XP wireless via linksys router The wireless router was recently set up and my connection was great for about a day but has not worked for weeks In the network and sharing center window it shows while I am connected to my roommates wireless network it is only a local connection that s there is a red x between the wireless network and the internet When I click on red x and run the windows diagnostics program I get There may be a problem with th Domain Name Servers DNS I had the same problem at work using a cable and the tech guy just changed some iPv settings and have never had connection problems but home is a different story I am just trying to get the wireless connection but even a cable connection would be a break through Here are my ipconfig stats Microsoft Windows Version Copyright c Microsoft Corporation All rights reserved C Users mwashinton gt ipconfig all Windows IP Configuration Host Name mwashinton-PC Primary Dns Suffix Node Type Hybrid IP Routing Enabled No WINS Proxy Enabled No Wireless LAN adapter Wireless Network Connection Connection-specific DNS Suffix Description Atheros AR b g WiFi Adapter Physical Address - E- C- -E -D DHCP Enabled Yes Autoconfiguration Enabled Yes IPv Address Preferred Subnet Mask Lease Obtained Sunday May PM Lease Expires Tuesday May PM Default Gateway DHCP Server DNS Servers NetBIOS over Tcpip Enabled Ethernet adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description NVIDIA nForce Mbps Ethernet Physical Address - B- -F -A - DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description isatap E EB EE -E - E - D - E br E Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description TO Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description Microsoft to Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description Teredo Tunneling Pseudo-Interface Physical Address - - - - E- DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description isatap BB A - - F -B D - F B br F B Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes C Users mwashinton gt ping Pinging with bytes of data Reply from bytes time lt ms TTL Reply from bytes time lt ms TTL Reply from bytes time lt ms TTL Reply from bytes time lt ms TTL Ping statistics for Packets Sent Received Lost loss Approximate round trip times in milli-seconds Minimum ms Maximum ms Average ms C Users mwashinton gt ping Pinging with bytes of data Reply from bytes time ms TTL Reply from bytes time ms TTL Reply from bytes time ms TTL Reply from bytes time ms TTL Ping statistics for Packets Sent Received Lost loss Approximate round trip times in milli-seconds Minimum ms Maximum ms Average ms C Users mwashinton gt ping google com Ping ... Read more

Relevancy 82.99%

So I have been unable to use the internet on my labtop for months I have another labtop that works fine and a ipod touch that connects through wireless that works fine I replaced the wireless card itself so I was able to rule that out Please help me getting it working again This is what i get when i run ipconfig all Microsoft Windows Version Copyright c Microsoft Corporation All rights reserved C Users Chad gt ipconfig all Windows IP Configuration Host Name Chad-PC Primary Dns Suffix Node Type Hybrid IP Routing Enabled No WINS Proxy Enabled No Wireless LAN adapter Wireless Network Connection Connection-specific DNS Suffix Description Intel R PRO Wireless ABG Network Con nection Physical Address - B- - B-A - D DHCP Enabled Yes Autoconfiguration Enabled Yes Link-local IPv Address fe f ad df Preferred Autoconfiguration IPv Address Preferred Subnet Mask Default Gateway DNS Servers fec ffff fec ffff fec ffff NetBIOS over Tcpip Enabled Ethernet adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description Intel R PRO VE Network Connection Physical Address - B- - - -FC DHCP Enabled Yes Autoconfiguration Enabled Yes Tunnel adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description isatap D -D D- - C - D C D br E Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description Teredo Tunneling Pseudo-Interface Physical Address - - - connect ethernet or wireless cable. to Cant through internet - E- DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description isatap F C C - BA- CE- B- BFA br A Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description isatap D E- F C- D -A EC- A A C br A Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description isatap B FB C- B - A -A F -EBC br D Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description TO Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description isatap F DE-A C- CC -AED -C D F br E D Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description isatap F DFEB -A - A -A C- br CA Physical Address - - - - - - -E DHCP Enabled Cant connect to internet through wireless or ethernet cable. No Autoconfiguration Enabled Yes Tunnel adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description TO Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description isatap BF D - E - E - - br A Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description TO Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes PLEASE HELP nbsp

Relevancy 82.13%

Hi all,

I have an O2 wireless box II (Thomson Speedtouch TG585 v7) and I would like to connect it to the internet through an ethernet cable rather than a DSL line, is this possible?

I actually had it working last night by simply plugging it in, but this morning when I woke up it wasnt working at all! Somehow I could only connect to the wireless box but not to the internet!!!

Operating system - Windows Vista

If someone could help me I would be really grateful! Thanks!
 

A:Connecting O2 wireless box II to the internet thorugh an ethernet cable

https://forums.techguy.org/threads/connecting-o2-wireless-box-ii-to-the-internet-thorugh-an-ethernet-cable.946258/
Relevancy 82.13%

Hello I have just arrived at a friends house to stay for a while and my laptop does not connect to the internet properly through the wireless yet ethernet through not through but cable the internet to connects Laptop wireless works perfectly when plugged into the router directly through ethernet cable it is not the actual router s wireless that is broken because there are three other laptops that connect and work just fine I have done several virus scans using AVG and Spybot Search and Destroy and other than incredibar nothing has been found so i dont think it is a virus I Laptop connects to the internet through ethernet cable but not through wireless thought it might have been the to adapter so i disabled to no avail The problem is not connecting to the network as that works fine and every now and again i can get minutes of internet use before it stops working most of the time still saying i am connected to the internet for an extra minutes then saying i have a local only connection I did and ipconfig all when plugged into the router and this was the result Windows IP Configuration Host Laptop connects to the internet through ethernet cable but not through wireless Name Tom-PC Primary Dns Suffix Node Type Hybrid IP Routing Enabled No WINS Proxy Enabled No Ethernet adapter Bluetooth Network Connection Media State Media disconnected Connection-specific DNS Suffix Description Bluetooth Device Personal Area Network Physical Address - - F-B -C -EE DHCP Enabled Yes Autoconfiguration Enabled Laptop connects to the internet through ethernet cable but not through wireless Yes Wireless LAN adapter Wireless Network Connection Connection-specific DNS Suffix Description Intel R WiFi Link AGN Physical Address - -FB-B - F-A DHCP Enabled Yes Autoconfiguration Enabled Yes Link-local IPv Address fe dd af ac c Preferred IPv Address Preferred Subnet Mask Lease Obtained September Lease Expires September Default Gateway DHCP Server DHCPv IAID DHCPv Client DUID - - - - - -D - - - -B - - -D DNS Servers NetBIOS over Tcpip Enabled Ethernet adapter Local Area Connection Connection-specific DNS Suffix Description Broadcom NetLink TM Gigabit Ethernet Physical Address - -B - - -D DHCP Enabled Yes Autoconfiguration Enabled Yes Link-local IPv Address fe bcfe bf a Preferred IPv Address Preferred Subnet Mask Lease Obtained September Lease Expires September Default Gateway DHCP Server DHCPv IAID DHCPv Client DUID - - - - - -D - - - -B - - -D DNS Servers NetBIOS over Tcpip Enabled Tunnel adapter Local Area Connection Connection-specific DNS Suffix Description Teredo Tunneling Pseudo-Interface Physical Address - - - - E- DHCP Enabled No Autoconfiguration Enabled Yes IPv Address ef fb bc d f fff Prefe rred Link-local IPv Address fe bc d f fff Preferred Default Gateway NetBIOS over Tcpip Disabled Tunnel adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes And when it is just the wireless Windows IP Configuration Host Name Tom-PC Primary Dns Suffix Node Type Hybrid IP Routing Enabled No WINS Proxy Enabled No Ethernet adapter Bluetooth Network Connection Media State Media disconnected Connection-specific DNS Suffix Description Bluetooth Device Personal Area Network Physical Address - - F-B -C -EE DHCP Enabled Yes Autoconfiguration Enabled Yes Wireless LAN adapter Wireless Network Connection Connection-specific DNS Suffix Description Intel R WiFi Link AGN Physical Address - -FB-B - F-A DHCP Enabled Yes Autoconfiguration Enabled Yes Link-local IPv Address fe dd af ac c Preferred IPv Address Preferred Subnet Mask Lease Obtained September Lease Expires September Default Gateway DHCP Server DHCPv IAID DHCPv Cl... Read more

A:Laptop connects to the internet through ethernet cable but not through wireless

What firewall / security suite or anti-virus do you currently have on the PC - or you have ever had on the PC in the past - any trial ware - like Norton, Mcafee

i would remove AVG - see below , that could be blocking

as you are getting an IP

this does not often work on wireless - but try anyway
- try safemode with networking
as the PC starts keep tapping F8 - a menu appears - choose
safemode with networking - see if that works
------------------------------------------------------------------------

also try a TCP/IP reset - see below

------------------------------------------------------------------------

TCP/IP stack repair options for use with Vista/Windows 7

Start> Programs> Accessories> and right click on Command Prompt, select "Run as Administrator" to open a command prompt box
(A new dialogue box - black with white font, will appear on the screen ):

In the command prompt window that opens, type the following commands:

Note: Type only the text in bold and red for the following commands.

Reset WINSOCK entries to installation defaults: netsh winsock reset catalog and press enter

Reset IPv4 TCP/IP stack to installation defaults. netsh int ipv4 reset reset.log and press enter

Reset IPv6 TCP/IP stack to installation defaults. netsh int ipv6 reset reset.log and press enter

ReStart (reboot) the machine.

If you receive the message
The requested operation requires elevation.
Then please open the command prompt as administrator - as requested above
Start> Programs> Accessories> and right click on Command Prompt, select "Run as Administrator" to open a command prompt box
(A new dialogue box - black with white font, will appear on screen ):

Please note and post back - if you receive the following message :-
Access is Denied

please post back the results in a reply here - its important we know that these commands have worked correctly and not produced any errors
right click in the command prompt box
select all
enter
control key + C key - to copy
then reply here and
control key + V to paste

Details also here
http://support.microsoft.com/kb/299357
------------------------------------------------------------------------

AVG Removal Tools
http://www.avg.com/gb-en/utilities
 

https://forums.techguy.org/threads/laptop-connects-to-the-internet-through-ethernet-cable-but-not-through-wireless.1069516/
Relevancy 82.13%

I have an old laptop running Windows 2000 and a PC running XP. I decided to use the old laptop as a second monitor using Maxivista, and it requires that both computers be connected by a TCP/IP connection. My PC is connected to the internet wirelessly to a router downstairs, and it is connected to my laptop via an ethernet cable.
Right now the TCP/IP is not working, in the command script when I ping the DNS server and Default Gateway (of the Lan connection) on both computers it doesn't work and it gives me a "request timed out" message.
But the main problem is that when my laptop is on or I have the ethernet cable connected to the laptop the internet on my PC stops working. When I turn off the laptop or pull out the cable my internet starts working again.
Any ideas as to what is the problem?

A:Wireless internet disconnects when LAN ethernet cable is plugged in

You must be using a cross-over cable in this instance. A regular LAN patch cable will not work.
Set the IP on your ethernet connection to a different subnet than used by your wireless LAN.

For example, if your Wireless LAN is distributing / using IPs in the subnet 192.168.x.x, set up your ethernet and laptop adapters as follows:

Desktop:
IP address: 10.0.0.1
Subnet Mask: 255.0.0.0
Gateway: 10.0.0.2

Laptop:
IP address: 10.0.0.2
Subnet Mask: 255.0.0.0
Gateway: 10.0.0.1

You do not need to set any DNS address.

http://www.techsupportforum.com/forums/f10/wireless-internet-disconnects-when-lan-ethernet-cable-is-plugged-in-113459.html
Relevancy 81.7%

Hi guys I ve been researching and trying to days to get this to work with no avail so I decided to post here for some help as doesn't Ethernet connected Wifi work cable. using working when only Internet I see this community is really active We ve got different laptops here and none of them can connect to the wifi anymore it suddenly stopped working for the last whole week We can connect to the internet through ethernet cables though We only use one at a time if ethernet then wireless is disabled and vice versa Here is a copy of the ipconfig all Windows IP Configuration Host Name PeterMai-HP Primary Dns Suffix Node Type Hybrid IP Internet only working when connected using Ethernet cable. Wifi doesn't work Routing Enabled No WINS Proxy Enabled No DNS Suffix Search List moolahd local Ethernet adapter Local Area Connection Connection-specific DNS Suffix moolahd local Description Realtek PCIe GBE Family Controller Physical Address AC- - D- B-ED-F DHCP Enabled Yes Autoconfiguration Enabled Yes Link-local IPv Address fe ac a d b Preferred IPv Address Preferred Subnet Mask Lease Obtained Monday October PM Lease Expires Tuesday October PM Default Gateway DHCP Server DHCPv IAID DHCPv Client DUID - - - - - -FB- -AC- - D- B-ED-F DNS Servers Primary WINS Server NetBIOS over Tcpip Enabled Wireless LAN adapter Wireless Network Connection Connection-specific DNS Suffix Description Broadcom GN b g n x Wi-Fi Ada pter Physical Address -ED-B - D- -FD DHCP Enabled Yes Autoconfiguration Enabled Yes Link-local IPv Address fe c f e e b fc f Preferred Autoconfiguration IPv Address Preferred Subnet Mask Default Gateway DHCPv IAID DHCPv Client DUID - - - - - -FB- -AC- - D- B-ED-F DNS Servers fec ffff fec ffff fec ffff NetBIOS over Tcpip Enabled Tunnel adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description Microsoft to Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter isatap optusnet com au Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter isatap moolahd local Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter Reusable ISATAP Interface CE FC E - F - C C- D - D EBEC Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter isatap DDFAF D- B- -AA A-DBE BA F Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter Reusable ISATAP Interface E ED - - A -BB -FB FA F F Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes And here is a copy of the route print Interface List ac d b ed f Realtek PCIe GBE Family Controller ed b d fd Broadcom GN b g n x Wi-Fi Adapter Software Loopback Interface e Microsoft to Adapter e Microsoft ISATAP Adapter e Microsoft ISATAP Adapter e Microsoft ISATAP Adapter e Microsoft ISATAP Adapter e Microsoft ISATAP Adapter e Microsoft ISATAP Adapter e Microsoft ISATAP Adapter IPv Route Table Active Routes Network Destination Netmask Gateway Interface Metric O... Read more

A:Internet only working when connected using Ethernet cable. Wifi doesn't work

You have an IP on your LAN, but none on your wifi. Check your router to make sure DHCP for wifi is turned on and you have enough available addresses.
 

http://www.techspot.com/community/topics/internet-only-working-when-connected-using-ethernet-cable-wifi-doesnt-work.197081/
Relevancy 81.27%

Hello,

I am having problem connecting my laptop to the internet via ethernet cable.

I am typing this from a Mac desktop that is on the same connection - no router in use, just a cable modem.

I have tried 3 different laptops plugging in to the ethernet cable directly to the modem and all say the same thing - limited to no connectivity for the XP machines, and "Local access only" for the Vista machine.

It recognizes the ethernet cable, and it searches for connectivity but does not succeed.

What makes this weird is that the connection itself is live as evidenced by my ability to type on this desktop.

Please help!!
 

A:Solved: Can't connect laptop to internet via ethernet cable (wireless is ok)

https://forums.techguy.org/threads/solved-cant-connect-laptop-to-internet-via-ethernet-cable-wireless-is-ok.759881/
Relevancy 81.27%

Hi great site idea I m having a strange issue regarding internet Moved country Ireland to Australia PC had never caused any issues before and was connected to net via a wireless adapter Moved to Australia set up PC everything seems fine apart from not being able to connect to Internet Wireless - when I plug wireless adapter into usb port toolbar displays Monitor with red x so i double click and to view network list but my network isn t available but my neighbors one shows up even though according to the status of wireless network connections adaptor is internet connect Solved: or Wireless wont to PC cable Ethernet via quot Not connected quot but my network is a very strong signal and am actually using it right now on Solved: PC wont connect to internet via Wireless or Ethernet cable my notebook to send this mail so adaptor s Solved: PC wont connect to internet via Wireless or Ethernet cable sees asnother network but not my network which is metre away Ethernet Cable - Plug in cable but nothing happens no change on toolbar nothing in Network Connections Tried internet with but doesn t work stumped Am I making a simple schoolboy error here Checked Device Manager and there is a yellow question mark at Other Devices opened that and inside yellow question mark and exclamation mark over quot other PCI Bridge quot and quot Video Controller VGA Compatible Any advise cant update any drivers as I cant get PC online obviously Thanks in advance nbsp

Relevancy 78.26%

Hey would just like to say hello to everyone as this is ethernet not work wireless Internet will or using my first post here im a new guy Hopefully you guys can help resolve a problem thats been racking my brain for over days A few days ago i was happily working away in Fruity Loops im a producer and suddenly i wasnt Internet will not work using ethernet or wireless allowed into my folders then shortly after i lost the use of my usb keyboard and usb mouse As a course of action i shut down my system disconnected my internet disconnectted my mouse and keyboard and borrow a friends mouse and keyboard to go straight into the motherboard ports and booted up widnows again as soon as it started i put on multiple virus and spyware scans and got rid of anything that looked suspicious rebooted and i had Internet will not work using ethernet or wireless access to my folders again i got onto another pc the one im on now and downloaded the driver for m y usb mouse and set the HID in services back to automatic thus giving me back my mouse and keyboard but My internet will not connect in my netowrk connections the ethernet is shown to be connected but it will not initialize the start up process of the internet connection nor will the ethernet register as being present in the Virgin Media Broadband software when it asks to connect the ethernet or wireless adapter After a while i decided to try and get the wireless going on my machine so i could access the internet voia that thus proving my initial theory that my on board ethernet was faulty the wireless behaved in the same manner only this time when i tried the virgin media software it worked and recognised the dongle was present i then put in my pass and it would say not connected so it would gain connection to the wireless router but not the internet so its the same overall conclusion as the ethernet Router - NETGEAR Wireless G Router WGR v Modem - Virgin Media Tradename Ambit E C Ethernet - ABIT KV- REV Onboard VIA Compatable Fast Ethernet Adapter Wireless Dongle - LM Technologies g Wireless G USB Network Adapter Any suggestions nbsp

A:Internet will not work using ethernet or wireless

Reset/Reload your router settings, connect to it using wireless (no key), release and renew DHCP on WAN port and see if you can get online.
 

https://forums.techguy.org/threads/internet-will-not-work-using-ethernet-or-wireless.872803/
Relevancy 77.4%

Hi I recently bought a Asus WL- ge storage router It s got a built in hard work plugged when not internet is Wireless Ethernet will in drive and that s all I m using it for the storage I already have a wireless network setup in my home which my XP PC connects happily to The problem is when I connect my new Asus box via Ethernet to my PC web pages stop loading I don t loose the connection and windows say s both Wireless internet will not work when Ethernet is plugged in connections are happy When I unplug the Ethernet I can once again access the internet I think it might have something to do with the IP addresses of the devices or a setting I ve missed in the configuration of the Asus router although I ve tried just about every combination of static and dynamic addresses on my PC and the Asus box If anyone can help it would be really great One of the main reason I bought this device was so I could download large files from the web directly to it obviously right now that s impossible Thanks in advance Cameron nbsp

Relevancy 76.54%

When I plug an ethernet wire from a router to the ethernet port on my computer, nothing seems to happen. There is no LAN option under my "network connections" either. My first guess is that I don't have the correct driver installed (or if I have one at all for the ethernet). Can anyone help me? I tried to open up the computer to see the brand of the Ethernet card but Some of the screws were stuck and I couldn't seem to open it. It is a Laptop running Windows XP by the way. I bought it at cyberpowerpc.com. Thanks very much for any help.
 

A:Windows XP: Ethernet port (and LAN) does not work..only wireless internet

https://forums.techguy.org/threads/windows-xp-ethernet-port-and-lan-does-not-work-only-wireless-internet.937850/
Relevancy 73.1%

Hi A week ago my computer suddenly could not connect to the internet I was using a cable directly connected to the cable modem Since then I ve tried Added a WiFi router connected to the cable modem Tried using the WiFi card built in to the computer It connects but reports quot limited access quot and there is no connection to the internet and I can t access the router itself Bought a new Ethernet card installed the drivers that came with it I ve tried it connected through the WiFi router s hard ports and directly to the modem Hard resets power cycling off minutes on the modem each time and still no Using ethernet Lost Cable modem, connection Internet. to cable. connection In device manager both Ethernet cards show as quot working normally quot with no errors So does the WiFi card ipconfig shows only quot tunneling quot devices with media disconnected Lost connection to Internet. Using Cable modem, ethernet cable. I ve uninstalled and re-installed the drivers for the on-baord Ethernet the WiFi card and the new Ethernet card After reading some other posts I captured the output from ipconfig and several netsh commands I ve attached them to this post The files starting with netsh are basically the command entered with underscores replacing the spaces from the commands used to generate them I also borrowed another computer It connects both directly through the cable modem and using the Ethernet ports on the router It doesn t have WiFi so I couldn t test that method of access It can also connect to and configure the router but I haven t made any changes The router is a NetGear G N Any help will be greatly appreciated Thanks Sloan nbsp

Relevancy 70.52%

I just ran an ethernet cable from my router, in my office, all the way upstairs across the house to my bedroom to hook up to my ps3. I finally crimped the ends and went to test it and it doesn't work. I made sure that the wires went into the connectors correctly. I cant figure out what is wrong! Any ideas?? Thanks in advance!
 

Relevancy 69.66%

Hi all,
i have a desktop with windows xp home edition.
i currently have to use a blue usb cable from my internet gateway into my computer as my ethernet cable will not work.
do i need to install a driver or something for it to work?

any suggestions will be appreciated
 

A:Solved: Cant get yellow ethernet cable to work

Hey, spend $5 and get another ethernet cable. USB connections are a pain.
 

https://forums.techguy.org/threads/solved-cant-get-yellow-ethernet-cable-to-work.859942/
Relevancy 69.66%

Hey guys, my laptop asus stopped working with wifi connection and I was just reading some posts here about this same problem but didn't find how to fix it.

I was uninstalling some programs from my pc but I didn't uninstall programs named "something wireless". I just took off what I knew I could.

I also tried the option "solve problems" in the wireless pc symbol and the answer was to connect my laptop to an ethernet cable...that never happened. Just now.

Does anyone knows how I get back my wireless connection? Pleasee
 

A:WiFi doesn't work only with cable ethernet

Powercycle the modem and router. Here is a specific order if you have a separate modem and router.
1. Shut down all PC's.
2. Shut down the Modem and router.
3. Power on the modem only. Wait 2 minutes or so.
4. Power on the router. Wait 2 minutes or so.
If you have a modem/router combo, then you don't need step 4.
5. Boot up the PC and see if you can connect.
 

http://www.techspot.com/community/topics/wifi-doesnt-work-only-with-cable-ethernet.207136/
Relevancy 69.23%

Hi there I ve ethernet via cable, but Connection through not Wireless got a PC connected to the internet with an ethernet cable and two laptops connected to the same router via wireless Everything was working fine untill a few Connection through ethernet cable, but not via Wireless days ago At the moment I still have internet on my PC but both of the laptops do connect to the router but won t connect to the internet I have tried the usual flushdns and problem solving in Control Panel but I can t get it to work and I haven t got a clue what I should do next Here s the IPConfig all for both laptops One pasted the other one in file as to not spam the post Microsoft Windows versie Copyright c Microsoft Corporation Alle rechten voorbehouden C Users Wilma gt ipconfig all Windows IP-configuratie Hostnaam LaptopWilma Primair DNS-achtervoegsel Knooppunttype hybride IP-routering ingeschakeld nee WINS-proxy ingeschakeld nee Draadloos LAN-adapter voor Draadloze netwerkverbinding Mediumstatus medium ontkoppeld Verbindingsspec DNS-achtervoegsel Beschrijving Microsoft Virtual WiFi Miniport Adapter Fysiek adres A-F -A - F- -DB DHCP ingeschakeld ja Autom configuratie ingeschakeld ja Draadloos LAN-adapter voor Draadloze netwerkverbinding Verbindingsspec DNS-achtervoegsel Beschrijving Atheros AR B Wireless Network Adapter Fysiek adres -F -A - F- -DB DHCP ingeschakeld ja Autom configuratie ingeschakeld ja Link-local IPv -adres fe a bbb f ff voorkeur IPv -adres voorkeur Subnetmasker Lease verkregen zondag augustus Lease verlopen maandag augustus Standaardgateway fe bf e fc e DHCP-server DHCPv IAID DHCPv -client DUID - - - - -B -D -DA- -AE- D- - E-D DNS-servers NetBIOS via TCPIP ingeschakeld Tunnel-adapter voor isatap F B - C - CA - FDC- E D F D Mediumstatus medium ontkoppeld Verbindingsspec DNS-achtervoegsel Beschrijving Microsoft ISATAP Adapter Fysiek adres - - - - - - -E DHCP ingeschakeld nee Autom configuratie ingeschakeld ja Tunnel-adapter voor isatap F C F - CFE- F- EBB- CB AA A Mediumstatus medium ontkoppeld Verbindingsspec DNS-achtervoegsel Beschrijving Microsoft ISATAP Adapter Fysiek adres - - - - - - -E DHCP ingeschakeld nee Autom configuratie ingeschakeld ja Tunnel-adapter voor TO Adapter Mediumstatus medium ontkoppeld Verbindingsspec DNS-achtervoegsel Beschrijving Microsoft to Adapter Fysiek adres - - - - - - -E DHCP ingeschakeld nee Autom configuratie ingeschakeld ja Tunnel-adapter voor Teredo Tunneling Pseudo-Interface Mediumstatus medium ontkoppeld Verbindingsspec DNS-achtervoegsel Beschrijving Teredo Tunneling Pseudo-Interface Fysiek adres - - - - - - -E DHCP ingeschakeld nee Autom configuratie ingeschakeld ja http filedump org files cnzR html And here s a SS from Wi-Fi inspector http imageshack us f xirruswifi jpg I hope someone here might have some advice Thanks in advance Paladoradin nbsp

Relevancy 68.8%

Hi! I don't know much about this place but there's a problem with my laptop and I don't know how to solve it. My laptop won't connect to the wifi anymore but it works perfectly fine with the ethernet cable. I appreciate it very much if you tech geniuses could help me out. THANK YOU!
 

A:My WiFi on my laptop won't work but works with Ethernet cable

Are there any yellow (!) in the device manager?
 

http://www.techspot.com/community/topics/my-wifi-on-my-laptop-wont-work-but-works-with-ethernet-cable.206652/
Relevancy 68.8%

Hey guys,

I have a Sony Vaio VPCEH15EN laptop & the OS is Windows 7 home basic. I have a wifi router which is of TPLINK.

The wifi won't connect to my laptop but it works fine on my mobile..it would only start working when I use the ethernet cable. I never had this problem before. I have tried everything ..I also tried the winsockfix.bat but all my efforts have gone in vain..I just don't know if the wifi router is faulty or the modem of my ISP...Please help me solve this problem.

Best Regards,
Om
 

A:Wifi on my laptop won't work but works when I use the ethernet cable

I have solved the problem by myself. To do this, first you have to disconnect your Ethernet cable from your laptop and follow the steps: Start>Control Panel>Network and Sharing Center>Manage Wireless Networks and remove all wireless connections by right click on it and select Remove network from the drop down menu. After doing this, close the windows and scan for the Wi-Fi networks. Click on the available network and select connect. After a while, you will be asked to give a password for your Wi-Fi connection. Type the password and click on connect button. And now will be connected to your Wi-Fi network via wireless.

May be it will help you.
Regards
MD. MAHMUDUL HASAN
 

http://www.techspot.com/community/topics/wifi-on-my-laptop-wont-work-but-works-when-i-use-the-ethernet-cable.200754/
Relevancy 68.8%

Hi All I have Windows Vista home premium I moved from Chicago to Boston Before I left Chicago I tried removing kaspersky internet security as my laptop used to heat up and shut down often you can hear the voice from laptop when more process are running and it shut s down While uninstalling kaspersky the laptop shutdown half way I moved to Boston I tried connecting to wireless it does not work It shows connected excellent signal strength but bytes received Wireless works fine for other room mates on their laptops If works, not cable does wifi Solved: work ethernet I try connecting from cable internet works fine Pasting the ipconfig all results Windows IP Configuration Host Name compaq-PC Primary Dns Suffix Node Type Hybrid IP Routing Enabled No WINS Proxy Enabled No DNS Suffix Search List hsd ma comcast net Wireless LAN adapter Wireless Network Connection Connection-specific DNS Suffix hsd ma comcast net Description Atheros AR b g WiFi Adapter Physical Address - F-E -BB- A- DHCP Enabled Yes Autoconfiguration Enabled Yes Link-local IPv Address fe d bd ea f ae Preferred IPv Address Preferred Subnet Mask Lease Obtained Saturday Solved: ethernet cable works, wifi does not work October AM Lease Expires Saturday November AM Default Gateway DHCP Server DHCPv IAID DHCPv Client DUID - - - - -DE-FB- - - E-EC- E-DA- DNS Servers NetBIOS over Tcpip Enabled Ethernet adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix hsd ma comcast net Description Realtek RTL x Family Fast Ethernet NIC Physical Address - E-EC- E-DA- DHCP Enabled Yes Autoconfiguration Enabled Yes Tunnel adapter Local Area Solved: ethernet cable works, wifi does not work Connection Media State Media disconnected Connection-specific DNS Suffix Description isatap E CF- F- D - FDE-F EC B DEA Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description Teredo Tunneling Pseudo-Interface Physical Address - - - - E- DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix hsd ma comcast net Description isatap hsd ma comcast net Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Pls help I also attached the pic of wifi inspector Thanks nbsp

A:Solved: ethernet cable works, wifi does not work

The following was put together mostly by etaf with a little help from me.

------------------------------------------------------------------------
Atheros Wireless Adapter - AR5007EG & AR5007
Over the last four or so years we have been seeing a lot of problems with the above adapters, mainly concerning WPA and WPA2 encryption and mainly on windows Vista.
We have seen just a couple of issues on other windows operating system, windows XP and windows 7.

Windows XP:- A driver update has resolved the issue
Windows 7 :- No conclusive results for a fix

The wireless adapter gets an IP configuration, and shows as connected, but communication is non-existent or sporadic.

Log into the Router and disable the wireless security and see if you are now able to connect to the internet and surf OK.
Please post back a reply here, and let us know if that works or does not work.

Here are a number of possible solutions

--- 1) In Device Manager right click on the wireless adapter and "update driver."

--- 2) Download and install the latest wireless driver from your laptop manufacturer's web site support section,

--- 3) On one occasion re-setting the router back to factory default and re-configuring the router settings has resolved the issue

--- 4) The majority of members, have now used the drivers from the atheros driver site, which has resolved the issue.
- see below for direct links for windows vista and the link for all Atheros adapters and supported operating systems
AR5007
Vista 32 / 64 Bit
Direct link Drivers for Atheros AR5007 and Windows Vista 32 / 64 bit
You only need to click on the green download button labelled " Click to Download " and wait, the file will download - you do not need to click on any other buttons to get the download started
AR5007EG
Vista 32 / 64 Bit
Direct link Drivers for Atheros AR5007EG and Windows Vista 32 / 64 bit
You only need to click on the green download button labelled " Click to Download " and wait, the file will download - you do not need to click on any other buttons to get the download started
Drivers for the other windows operating system
http://www.atheros.cz/atheros-wireless-drivers.php
You need to look down the page for your particular adapter model and then look across the columns to find your windows version.
Now click on the blue tick mark in the column under your windows version.
This will open another page for that particular adapter and that windows version.

Now click on the download button labelled " Click to Download " and wait, the file will download - you do not need to click on any other buttons to get the download started

Assuming that after all the above the wireless still does not connect to the internet, all I can suggest is to use wireless security of WEP or to get an external USB wireless card.

------------------------------------------------------------------------
 

https://forums.techguy.org/threads/solved-ethernet-cable-works-wifi-does-not-work.1111550/
Relevancy 68.37%

Wasn't sure if this was supposed to go here or in networking, so I just put it here.

My family recently got a new desktop computer and my parents are putting it in my brothers room, which is near the opposite end of the house where the router and modem is. Should I just tell them to get some retartedly long Ethernet cord, or is there a good enough wireless adapter I could buy? I know direct connections are almost always better, but I don't think there is a store that sells long ethernet cords that stretch across my house, which is pretty big.
 

A:Solved: Ethernet Cable or Wireless Adapter?

It's easy enough to get an Ethernet cable up to 100 meters, and I'd guess that's long enough.
There are many factors that affect wireless reception, including the construction of your dwelling and the hardware you use, so I'd ask a mod to move this to the networking forum where you might get better help.
 

https://forums.techguy.org/threads/solved-ethernet-cable-or-wireless-adapter.1004052/
Relevancy 68.37%

Hi,

There's home wireless connection that my laptop won't connect to on its own. This wireless connects after the laptop has been connected to the router via the Ethernet cable, and stays connected with the cable unplugged until it drops (it's normal for my connection to drop sometimes), and then won't reconnect by itself again.

My wireless has wpa2-psk. OS is Vista.

Thank you.
 

A:Wireless only connects after Ethernet cable connection

Hey Sammy2. I assume your machine connected before with no connection issues.
Which Vista are you using,32 or 64 bit, and what Service Pack level is it on?
Do you have and use a good Anti-Virus/Anti-Malware cleaner?
When you lose your connection, is the Internet and wireless l.e.d.'s on the router still on?
Are there any other pc's that connect to this network?
When you state it won't connect again automatically, what do you do to get an Internet connection again?
 

http://www.techspot.com/community/topics/wireless-only-connects-after-ethernet-cable-connection.197616/
Relevancy 68.37%

I have had Windows 10 for a while and haven't had this problem until today. My connection was fine until I woke up this morning. I have tried updating my drivers but none are corrupt and are up to date. I have tried several solutions and looked at many videos and I cannot find a fix. Can anyone help?

A:My Ethernet cable nor wireless detects router.

Hi Dez37, welcome to the forums. Go to start, search and type cmd right click on the returned command prompt and select run as administrator, at the prompt copy paste:-

ipconfig/all > 0 & notepad 0 (press enter) Please post the notepad outcome here.

Also go to start, search and type devmgmt.msc, press enter, device manager will open, expand the tree under network adapters, tell us what you see.

Try a power cycle, turn off the modem/router and remove all power to it, turn off your computer and remove all power to it (if a laptop take out the battery) with the power off press the computer start button for a second, this will drain any residual power, leave the computer off. Now repower the modem/router and wait until it acquires all lead lights. Once this happens repower your computer, test your connection now.

http://www.techsupportforum.com/forums/f338/my-ethernet-cable-nor-wireless-detects-router-1121753.html
Relevancy 68.37%

I was on here last night trying to get my laptop to connect to wireless internet. I'm still working on figuring that out with the person I bought the laptop from and I may end up purchasing a wireless card, but now my question is:

Can I connect to the internet right now by using an ethernet network cable plugged into my computer and into the D-link router which my desktop computer already accesses the internet from?

I plugged it in but nothing happened.
 

Relevancy 68.37%

Hello

I have a dell inspiron 6400, and yesterday it suddenly was unable to connect to my wireless network. It has been randomly disconnecting from the network for a few weeks now, but I have just restarted my PC and it reconnects.

I can now only connect to my network via an ethernet cable.

Do I need to replace my network adapter? Do I need a new laptop? Is there a way I can fix it manually?

Any help will be greatly appreciated!

A:Can't connect to a wireless network without an ethernet cable

and welcome to the Forum

Lets take a peek at your network environment:

First:

Power Cycle everything . . Turn off the Modem, router and all pc's . . turn on the Modem and wait a few minutes for the lights to stabilize . . then turn on the router, then one pc at a time. See if you connect to the internet.

Then:

Remove all the stored wireless network profiles and search for the network again.

How to Remove Stored Wireless Network Profiles for XP, Vista, and Windows 7

Then: check your browser's settings, remove any proxy settings if found here's how.

Then:

with the pc connected to the router, Click on Start . . Run . . type CMD

At the > prompt type type the following command: IPCONFIG /ALL


Note that there is a space before the /ALL, but there is NOT a space after the / in the following command.

Right click in the command window and choose Select All, then hit Enter. Come back here and Paste the results in a message.

If you are on a machine with no network connection, use a floppy, USB drive, or a CD-R disk to transfer a text file with the information to allow pasting it here.

then please Download and run this Xirrus Wi-Fi Inspector, click the Networks link on the upper left and paste a screen shot of that screen here. Note that this application requires NET Framework to run. If you get an error about a missing function, download and install NET Framework.


To post a screen shot of the active window, hold the Alt key and press the PrtScn key. Open the Windows PAINT application and Paste the screen shot. You can then use PAINT to trim to suit, and save it as a JPG format file. To upload it to the forum, open the full reply window and use the Manage Attachments button to upload it here.

http://www.techsupportforum.com/forums/f217/cant-connect-to-a-wireless-network-without-an-ethernet-cable-663997.html
Relevancy 68.37%

Hi, my modem doesnt work when i plug 2nd ethernet cable in to it i am trying to link another pc to me modem but it just makes the lights flash and then doesnt work i tried it in different ports still doesnt work i also tried my xbox in it that doesnt work either iv have internet for 2 years and also plugged my xbox in now and agen and it worked fine but just recently doesnt want to work any ideas how to fix it ??
Thanks jake
 

Relevancy 67.51%

I have been having BSOD problems ever since I bought this computer (almost a year ago)
Originally it would BSOD on File > Open but I worked around that.
Not It BSODs when ever I either boot it up with some type of internet adapter plugged in, or plug some sort of internet adapter after I turned it on. If I plug it in after it has be turned on, it will run for maybe 10-20 min, and then BSOD.
I was unable to retrieve a System Health Report
I received the error:
Error:

An error occured while attempting to generate the report.
The system cannot find the path specified.
This may relate to me being in safe mode but I'm not sure.

Windows 7 . . .
- x64bit
- Windows 7 Home Premium OEM
- Coming up on 1 year
- 1 year also
- Gateway DX 4840
- Intel Core i3 CPU 550
- 8192mb Ram

A:BSOD with Ethernet Cable/Wireless Adapter plugged in

  
Quote: Originally Posted by robozman


I have been having BSOD problems ever since I bought this computer (almost a year ago)
Originally it would BSOD on File > Open but I worked around that.
Not It BSODs when ever I either boot it up with some type of internet adapter plugged in, or plug some sort of internet adapter after I turned it on. If I plug it in after it has be turned on, it will run for maybe 10-20 min, and then BSOD.
I was unable to retrieve a System Health Report
I received the error:
Error:

An error occured while attempting to generate the report.
The system cannot find the path specified.
This may relate to me being in safe mode but I'm not sure.

Windows 7 . . .
- x64bit
- Windows 7 Home Premium OEM
- Coming up on 1 year
- 1 year also
- Gateway DX 4840
- Intel Core i3 CPU 550
- 8192mb Ram


Nothing in the compressed file please try this method

We do need the DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.

If you are overclocking STOP

You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.

To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

The procedure:





Quote:
* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.
*If the files are too large please upload them to a file sharing service like "Rapidshare" and put a link to them in your reply.



To ensure minidumps are enabled:





Quote:
* Go to Start, in the Search Box type: sysdm.cpl, press Enter.
* Under the Advanced tab, click on the Startup and Recovery Settings... button.
* Ensure that Automatically restart is unchecked.
* Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
* Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
* OK your way out.
* Reboot if changes have been made.

http://www.sevenforums.com/bsod-help-support/211790-bsod-ethernet-cable-wireless-adapter-plugged.html
Relevancy 67.51%

Hi I hope you can help - I am trying to connect a ZyXEL P HW Wireless ADSL Modem router to my Windows XP SP desktop computer I have had various problems but Problems cable wireless ethernet via router connecting have now managed to get my LAN connectivity back and Problems connecting wireless router via ethernet cable this is telling me my LAN is connected but the LAN socket on the router is not lighting up when I connect the ethernet cable into the back of the PC When I try to connect to the internet Problems connecting wireless router via ethernet cable via the router nothing is happening and I get the following message after running network diagnostics - Error attempting to validate Winsock base providers Not all base service provider entries could be found in this winsock catalog A reset is needed I have run several winsock fixes they all tell me the catalog has been repaired but I am still getting this error I have re-set the router several times and have configured the IP address and default gateway I can connect to the internet using my Speedtouch modem with no problems at all I have run out of ideas - please help nbsp

Relevancy 67.51%

Hi Everyone
I wonder if anyone can help me please.
Make HP g56 Laptop
ISP Virgin Media Cable 150 meg connection
Router Virgin Media Superhub
Norton Intternet Security
No other protection is turned on

I have two computers connected to the Hub

My wifes computer fujitsu 4 core runs at the true 150 meg speed with wired ethernet cable (Perfect)

My laptop however runs at half speed with wired ethernet connection. In fact it runs at the same speed as it does when connecting via wireless to the same superhub. about 75 megs.

I have posted an ipconfig image if this is any help.

Kindest Regards

Anthony George

A:HP Laptop running same speed on ethernet cable as Wireless

Hi .... You have to remember it is up to 150mb ... You will not get this speed all the time ..

Have you just got Virgin Installed lately if so it takes some time to settle ...

Also does your Network Adapter support the top speed ? ...
As for wireless and Lan connections they can be the same speed with Virgin ... Though you should be getting more than 75mb at times ....
Virgin Media - Extremely fast broadband speeds

http://www.sevenforums.com/network-sharing/369043-hp-laptop-running-same-speed-ethernet-cable-wireless.html
Relevancy 67.51%

i used to be able to access the internet directly via a direct ethernet connection but now my only option appears to be the wireless network connection i don't recall when exactly the local area connection connect works via but not ethernet connection cable can wireless disappeared but the wireless is too slow amp unreliable i really would appreciate any assistance figuring out how to connect to the internet directly again i'm running windows xp home edition version wireless connection works but can not connect via ethernet cable with service pack on a emachine desktop i have a netgear wireless pci adapter for wireless connection works but can not connect via ethernet cable the wireless i tested the cable on another pc so i know the cable amp the ethernet connection work when i plug teh cable into my pc shouldn't a local area connection option appear on my network connections i believe i used to wireless connection works but can not connect via ethernet cable be able to choose between wireless amp local are connection but not all i get is wireless network connection i ran ipconfig all this i what i got C Documents and Settings Owner gt ipconfig all Windows IP Configuration Host Name DA -Bloomfield Primary Dns Suffix Node Type Unknown IP Routing Enabled No WINS Proxy Enabled No DNS Suffix Search List myhome westell com Ethernet adapter Wireless Network Connection Connection-specific DNS Suffix myhome westell com Description NETGEAR WG g Wireless PCI A dapter Physical Address - - B- - C- Dhcp Enabled Yes Autoconfiguration Enabled Yes IP Address Subnet Mask Default Gateway DHCP Server DNS Servers Lease Obtained Wednesday October AM Lease Expires Thursday October A M any help would be appreciated dB

A:wireless connection works but can not connect via ethernet cable

I have no idea about your level of knowledge but I thought I'd let you know what I would do to investigate the problem....

Right click My Network places from the desktop or go to Start, All Programs, Accessories, Communications, Network Connections.

Here you should see you LAN and Wireless Connections. Make sure the LAN connection is not disabled. Right click, properties, select Internet Protocol in the box and set everything to automatic; obtain IP and DNS automatically, assuming you have a DHCP server on the network. The router perhaps? If not then manually enter the IP, subnet mask (probably 255.255.255.0) and the gateway ip. Set the Primary DNS address to the same as the gateway again, assuming the router is configured to get it's DNS address from your ISP. Click Advanced and set Enable NetBIOS over TCIP in the WINS tab.

Also check in Device Manager that your Network Card (NIC) is available, enabled and working.

Once the ethernet cable is attached, you should at least be able to ipconfig and see the LAN connection. If you can try to ping the router:
ping 192.168.1.1
You should get 4 replies if all is well.
Then try to ping an external address:
ping www.google.co.uk
again, you should 4 replies.

I know this is fairly detailed help but that would be a good start to investigate your issue.

Good luck...

http://www.techsupportforum.com/forums/f10/wireless-connection-works-but-can-not-connect-via-ethernet-cable-422128.html
Relevancy 67.08%

Hello Guys I ve ethernet no 7 modem from can't access Win internet ipv4 - have ipv6 internet no cable been searching for the past days a solution but nothing came up to work Tried different things nothing good yet So I m directly connected to a modem cable and well my computer takes time to identify and then identifies it first a a public network i was able to change it to home Win 7 - can't have internet access cable ethernet from modem ipv6 no internet ipv4 no ipv no internet access ipv no network access Here s my ipconfig log Code Windows IP Configuration Host Name TheRealThing-PC Primary Dns Suffix Node Type Broadcast IP Routing Enabled No WINS Proxy Enabled No DNS Suffix Search List flets-east jp iptvf jp Ethernet adapter Local Area Connection Connection-specific DNS Suffix flets-east jp Description Broadcom NetLink TM Gigabit Ethernet Physical Address - A- A- -AF-E DHCP Enabled Yes Autoconfiguration Enabled Yes IPv Address a bb de f e eb Pr eferred Temporary IPv Address a d a d f Pre ferred Link-local IPv Address fe bb de f e eb Preferred Autoconfiguration IPv Address Preferred Subnet Mask Default Gateway fe e ff fe a c DHCPv IAID DHCPv Client DUID - - - - - - A-C - C- - D- - - DNS Servers a f b a f a NetBIOS over Tcpip Enabled Connection-specific DNS Suffix Search List flets-east jp iptvf jp Wireless LAN adapter Wireless Network Connection Media State Media disconnected Connection-specific DNS Suffix Description Atheros AR B Wireless Network Adapter Physical Address C- - D- - - DHCP Enabled Yes Autoconfiguration Enabled Yes Ethernet adapter Local Area Connection Connection-specific DNS Suffix Description Hamachi Network Interface Physical Address A- - -D - B-D DHCP Enabled Yes Autoconfiguration Enabled Yes IPv Address b d bd Preferred Link-local IPv Address fe c e e c b Preferred IPv Address Preferred Subnet Mask Lease Obtained octobre Lease Expires octobre Default Gateway b DHCP Server DHCPv IAID DHCPv Client DUID - - - - - - A-C - C- - D- - - DNS Servers fec ffff fec ffff fec ffff NetBIOS over Tcpip Enabled Tunnel adapter isatap A - EB- BDC- -C AB E FB Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter isatap gateway wire net Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter Teredo Tunneling Pseudo-Interface Media State Media disconnected Connection-specific DNS Suffix Description Teredo Tunneling Pseudo-Interface Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter isatap B D- D- E - -EB C F Media State Media disconnected Connection-specific DNS Suffix flets-east jp Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter isatap AF ED-DA F- CF-B B- A ECC D Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter Reusable ISATAP Interface C D- F- DE- C- A C Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes I was able to get the latest driver of my Broadlink card Didn t change anything I tried manually setting the IPs but honestly it was my first time ever using ipv I don t know why I had to use them also and maybe don t exactly know how to use this Windows troubleshooter tells me DNS server error If you know anything Cheers m nbsp

A:Win 7 - can't have internet access cable ethernet from modem ipv6 no internet ipv4 no

https://forums.techguy.org/threads/win-7-cant-have-internet-access-cable-ethernet-from-modem-ipv6-no-internet-ipv4-no.1136264/
Relevancy 67.08%

Laptop running Windows no wifi to Netgear Router I hope someone can help me with this problem please A new Netgear wireless router was set up some months ago It works fine on tablets cell phones all Androids and one for ethernet laptop wireless Netgear48 reqd router cable desktop computer Win All of these will work without the need to be connected to the router however my laptop Netgear48 wireless router ethernet cable reqd for laptop running Win will not connect to the web unless the Ethernet cable is connected between laptop and router when it then works without a problem I have tried troubleshooting and this has failed to produce a solution and have then checked out the dependency services and got error messages which I cannot correct and really do not understand what they mean I am aware that these three services are interdependent and if one of these is wrong the other two won't play nicely However these only appear to affect the wireless side of the router as no problems are experienced when wired up These are the details Peer Name Resolution Protocol Properties On local computer Service Name PNRPservStartup Type AutomaticService status stoppedLog on as Local System Account radio button selected the Netgear48 wireless router ethernet cable reqd for laptop rest of the screen is emptyAllow service to interact with desktop blankDependencies This service depends on Peer Network Identity ManagerThe following system components depend on this service Peer Networking Grouping PNRP Machine Name Publication ServiceRecovery Not attemptedAttempted to start the service and got this error message Windows could not start the Peer Name Resolution Service on local computer Error The account specified for this service is different from the account specified for other services running in the same process Peer Networking GroupingService Name p psvcStartup Type AutomaticService status stoppedLog on as Local System account not selected Allow service to interact with desktop blankThis account selected Local Service Browse PasswordConfirm Password Not sure if this is the password used when setting up router Dependencies This service depends on Peer Network Resolution Protocol Peer Networking Identity ManagerThe following system components depend on this service No DependenciesRecovery Not attemptedAttempted to start the service and got this error message Windows could not start the Peer Networking Grouping Service on local computer Error The dependency service or group failed to start Peer Networking Identity Manager Service Name p pimsvcStartup Type AutomaticService status startedLog on as Local System account not selected Allow service to interact with desktop blankThis account selected Local Service Browse PasswordConfirm Password Not sure if this is the password used when setting up router Dependencies No DependenciesThe following system components depend on this service Peer Name Resolution Protocol Peer Networking GroupingRecovery Not attempted This appears to be the only one of the three services that is working although the other two are not which may explain why I cannot access the web if not connected to the router Any help or suggestions as to what has gone wrong here and how I can rectify matters would be much appreciated Many thanks

A:Netgear48 wireless router ethernet cable reqd for laptop

Further to my earlier query, I have checked those dependencies again, this time with the router plugged into the laptop, I got internet connection as expected, but the same errors were still there as noted previously, whatever is preventing me connecting to the internet wirelessly, it cannot be in that area. When the previous router, a Belkin, was setup I used the desktop computer as the main one always plugged into the router with the laptops operating wirelessly. I do not know if this is important, am blundering around trying to find a solution without a clue what to do next. Any ideas?

http://www.bleepingcomputer.com/forums/t/528444/netgear48-wireless-router-ethernet-cable-reqd-for-laptop/
Relevancy 67.08%

I have just put a new hard drive in my laptop - a sony vaio
It will no longer connect to my university internet through a cable which I just plug into the wall. It has no issue finding wireless connections. I have tried changing the connection cable but it had no effect. In device manager under network adapters it lists: Atheros AR9285 Wirless Network Adapter and there are no warnings associated with that. Underneath in other devices it states that the Ethernet Controller has no driver installed. Is this related?
Any help much appreciated
 

A:Laptop won't connect to ethernet cable despite finding wireless connections

Hi Molly123, and welcome to TSG.

Molly123 said:


It will no longer connect to my university internet through a cable which I just plug into the wall.
...
Underneath in other devices it states that the Ethernet Controller has no driver installed.
Is this related?
Click to expand...

A missing Ethernet driver will prevent the wired connection from working.
You can probably use your wireless connection to visit the support section of the the Sony web site and download the missing driver(s) and get instructions on how to install the downloaded driver.
 

https://forums.techguy.org/threads/laptop-wont-connect-to-ethernet-cable-despite-finding-wireless-connections.1089095/
Relevancy 67.08%

Hi,

I just bought a new router the ASUS RT-N56U .

After setting it up getting ISP provided information everything seemed to work fine but i then i done a speedtest with the ethernet cable plugged in and it would start off at 8Mb/s then would instantly drop to less than 0.5 Mb/s Here is a picture of what it looks like http://prntscr.com/7z9jcl I don't know how to fix it because when im on wireless only it works perfectly fine is there anything i can do?
 

A:Solved: Get huge speed drop on ethernet cable not on wireless!!!

There are a lot a variables. How is your cable made? Is it a store bought cable? Did you make it? Is it run or is it just laying on the floor run from router to PC? A little more info might help but ultimately it might come down to without being there to test the actual cable and NiC we won't be able to know for sure.
Sent from my iPhone using Tapatalk
 

https://forums.techguy.org/threads/solved-get-huge-speed-drop-on-ethernet-cable-not-on-wireless.1152628/
Relevancy 67.08%

My Sony Vaio seems to not like connecting to wireless internet anymore, and when I click on the available connections, it shows the ethernet cord as a wireless connection (but it works). There is no recognition from my computer that it is plugged in to a ethernet cord.

I have tried a system restore to 2 weeks before this all happened, and it didn't work. I'm not sure what to do, I know it's a problem with my computer because other people can connect to the ethernet cord and the wireless, just not me.

Any ideas?

A:Sony Vaio thinks ethernet cable is a wireless connection

and welcome to the Forum

Lets take a peek at your environment:

First:

Power Cycle everything . . Turn off the Modem, router and all pc's . . turn on the Modem and wait a few minutes for the lights to stabilize . . then turn on the router, then one pc at a time. See if you connect to the internet.

Then:

Remove all the stored wireless network profiles and search for the network again.

How to Remove Stored Wireless Network Profiles for XP, Vista, and Windows 7

Then: check your browser's settings, remove any proxy settings if found here's how.

Then:

with the pc connected to the router via the ethernet cable, , Click on Start . . Run . . type CMD

At the > prompt type type the following command: IPCONFIG /ALL


Note that there is a space before the /ALL, but there is NOT a space after the / in the following command.

Right click in the command window and choose Select All, then hit Enter. Come back here and Paste the results in a message.

If you are on a machine with no network connection, use a floppy, USB disk, or a CD-RW disk to transfer a text file with the information to allow pasting it here.

Repeat this with the pc connected to the router via wireless (disconnect the ethernet cable )

then please Download and run this Xirrus Wi-Fi Inspector, click the Networks link on the upper left and paste a screen shot of that screen here. Note that this application requires NET Framework to run. If you get an error about a missing function, download and install NET Framework.


To post a screen shot of the active window, hold the Alt key and press the PrtScn key. Open the Windows PAINT application and Paste the screen shot. You can then use PAINT to trim to suit, and save it as a JPG format file. To upload it to the forum, open the full reply window and use the Manage Attachments button to upload it here.

http://www.techsupportforum.com/forums/f31/sony-vaio-thinks-ethernet-cable-is-a-wireless-connection-606304.html
Relevancy 66.65%

Hello all,

I have a at&t u-verse router that is the model NVG589, Motorola

My question is:

I game on my PC a lot and would like to know, what is the best CAT cable to get that my internet box can support?

A:Best CAT Ethernet Cable For my internet?

The newest version is CAT6 but if making your own be sure to get the correct plugs to use with it. CAT5e is the previous version and CAT5 is older. There are other versions of lower number but really not suitable for much more than phone systems.

http://www.tenforums.com/network-sharing/66265-best-cat-ethernet-cable-my-internet.html
Relevancy 66.22%

hello As my PC will be moved upstairs soon where there is no way to get a ethernet cable any more I will be forced to go wireless I have never wanted it and never used it except on my mothers laptop witch is obviously built-in So my experience with wireless stuff is very low some fact that may play a role for your comments -from PC to modem router threw the walls will be about yards max -there is a chimney in the direct path from PC to modem router -there is barely any metals used in the house although the modem is placed next to the water-main -the laptop of my mother never had to switch Solved: connection from ethernet cable wireless modem/rout to Help! to need any issues and is about years old cant tell you the what hardware it used ATM Now what I want -I want my MB sec speed other wireless devices dont play any Solved: Help! need to switch from ethernet cable to wireless connection to modem/rout role gt mom laptop facebook and mails and searching the web and the rest is youtube lol and the Solved: Help! need to switch from ethernet cable to wireless connection to modem/rout smart TV really doesn t do anything except for streaming some video clips very rarely - I NEVER want to get disconnected not even for a millisecond if you catch my drift - I prefer an internal piece of hardware witch I have a PCI slot for with the room Although I would also like to be able to give internet to multiple PC s or whatever ya never know LAN party for example i do realize a switch would suffice but I ll just give you everything because I know there are many ways to go wireless just dont know crap about them - I m not a millionaire but I dont buy crap so keep that in mind lol but when I buy something that I you know will be perfect I wont look really close at the price my self built case costs me a total of euro s two years ago or by now i dont remember I ll add my system specifications at the bottom of my post hope you all can help me out And thanks in advance friendly regards bryan system specifications Processor Intel R Core TM i CPU X GHz Intel Family Model Stepping Processor Count RAM Mb Graphics Card NVIDIA GeForce GTX Mb Hard Drives C Total - MB Motherboard Gigabyte Technology Co Ltd X A-UD And the best Realtek case with fans at the time cant find the name nbsp

A:Solved: Help! need to switch from ethernet cable to wireless connection to modem/rout

https://forums.techguy.org/threads/solved-help-need-to-switch-from-ethernet-cable-to-wireless-connection-to-modem-rout.1068868/
Relevancy 66.22%

For the past year and a half I ve been using a Netgear N Wireless USB Adapter to connect my home-built computer with Windows to the wifi from the router on the floor directly below me and it s worked just fine But lately for the past couple antenna ethernet that suddenly nonexistent unplugged insists wireless cable is my My of weeks often when I get up in the My wireless antenna suddenly insists that my nonexistent ethernet cable is unplugged morning my little networking icon in my system tray has insisted that there are no available connections or that it can t find any because My wireless antenna suddenly insists that my nonexistent ethernet cable is unplugged my ethernet cable is unplugged I don t even HAVE an ethernet cable on this computer and I haven t ever I have also noticed that it seems to have this problem during the daylight hours No matter how many times I restart my computer or reset my adapter or physically go downstairs to make sure Dad hasn t bumped a wire Dad s computer remains perfectly connected and functional while mine mostly just frustrates me I get a pretty regular inflow of newsletters from various places and when I wake up in the afternoon and my internet is down my Gmail shows no new messages any later than AM and when my computer is magically able to detect a signal again and autoconnects this magic seems to happen at around PM As an experiment I plugged my old Presario with WinXP back in and hooked the adapter up to it and it couldn t connect either So I was sure it was the adapter so I went out and bought a new one of the exact same model as my old one And I m still having this problem What is this and how do I make it stop Tech Support Guy System Info Utility version OS Version Microsoft Windows Home Premium Service Pack bit Processor Intel R Core TM i - CPU GHz Intel Family Model Stepping Processor Count RAM Mb Graphics Card NVIDIA GeForce GTS Mb Hard Drives C Total - MB Free - MB Motherboard ASUSTeK Computer INC P P LE Antivirus avast Antivirus Updated and Enabled nbsp

A:My wireless antenna suddenly insists that my nonexistent ethernet cable is unplugged

https://forums.techguy.org/threads/my-wireless-antenna-suddenly-insists-that-my-nonexistent-ethernet-cable-is-unplugged.1101049/
Relevancy 65.79%

Hi I know this is a recurring problem and I ve scoured the forums for a solution but everything I ve tried so far hasn t worked Just got a new modem and it works fine while connected through an ethernet cord but I can t connect wirelessly My network doesn t even show up in the list of available networks I m using Vista by the way I ve downloaded all drivers that seemed to have something to do with my problem I ve done ipconfig all Can't cable to connect without ethernet internet and these are Can't connect to internet without ethernet cable the results Microsoft Windows Version Copyright c Microsoft Corporation All rights reserved C Users Gabrielle gt ipconfig all Windows IP Configuration Host Name Gabrielle-PC Primary Dns Suffix Node Type Hybrid IP Routing Enabled No WINS Proxy Enabled No Ethernet adapter Local Area Connection Connection-specific DNS Suffix Description NVIDIA nForce Networking Controller Physical Address - -D -F - - DHCP Enabled Yes Autoconfiguration Enabled Yes IPv Address Preferred Subnet Mask Lease Obtained July- - PM Lease Expires July- - PM Default Gateway DHCP Server DNS Servers NetBIOS over Tcpip Enabled Ethernet adapter Bluetooth Network Connection Media State Media disconnected Connection-specific DNS Suffix Description Bluetooth Device Personal Area Network Physical Address - E- - - B- DHCP Enabled Yes Autoconfiguration Enabled Yes Wireless LAN adapter Wireless Network Connection Media State Media disconnected Connection-specific DNS Suffix Description Broadcom AG a b g draft-n Wi-Fi Adapter Physical Address - A- - - - DHCP Enabled Yes Autoconfiguration Enabled Yes I m at a loss Any help would be greatly appreciated nbsp

A:Can't connect to internet without ethernet cable

You have a public IP address there, implying that your modem is just that, or if it is a modem/wireless router combo it is bridged (to act as modem only).

What is the brand and model of your modem?
 

https://forums.techguy.org/threads/cant-connect-to-internet-without-ethernet-cable.1060716/
Relevancy 65.79%

Hello all,

I am getting a BSOD whenever i use the internet while connected with an ethernet cable. When I am online via wifi however I do not get the error message.

I am noticing that I am getting information in the BSOD regarding anodlwfx.sys

I have attached the zip file. Any help would be greatly appreciated!

A:BSOD when using internet with Ethernet cable

Hi usurp.

Do you use the D-Link one? If not disable it. If you ever use it, update the driver to D-Link DWA-125 Wireless N 150 USB Adapter(rev.A2) from D-Link Technical Support

Also update the driver to realtek ethernet. Go to http://www.realtek.com.tw/downloads/...&GetDown=false .... get the 4th item of the list (the "Win7 and Server 2008 R2 Auto Installation Program" one) and install it.

Report us for any further BSOD.
________________________________________________

Code:
BugCheck D1, {fffff880056d1048, 2, 0, fffff88003eff875}

*** WARNING: Unable to verify timestamp for anodlwfx.sys
*** ERROR: Module load completed but symbols could not be loaded for anodlwfx.sys
*** WARNING: Unable to verify timestamp for Rt64win7.sys
*** ERROR: Module load completed but symbols could not be loaded for Rt64win7.sys
Probably caused by : anodlwfx.sys ( anodlwfx+2875 )

Followup: MachineOwner
---------

2: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high. This is usually
caused by drivers using improper addresses.
If kernel debugger is available get stack backtrace.
Arguments:
Arg1: fffff880056d1048, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000000, value 0 = read operation, 1 = write operation
Arg4: fffff88003eff875, address which referenced memory

Debugging Details:
------------------
READ_ADDRESS: GetPointerFromAddress: unable to read from fffff800030b3100
GetUlongFromAddress: unable to read from fffff800030b31c0
fffff880056d1048 Nonpaged pool

CURRENT_IRQL: 2

FAULTING_IP:
anodlwfx+2875
fffff880`03eff875 8b040a mov eax,dword ptr [rdx+rcx]

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT

BUGCHECK_STR: 0xD1

PROCESS_NAME: System

ANALYSIS_VERSION: 6.3.9600.17237 (debuggers(dbg).140716-0327) amd64fre

DPC_STACK_BASE: FFFFF880033A0FB0

TRAP_FRAME: fffff88003399440 -- (.trap 0xfffff88003399440)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=fffffa8007771298 rbx=0000000000000000 rcx=fffffa8007771860
rdx=fffffdfffdf5f7e8 rsi=0000000000000000 rdi=0000000000000000
rip=fffff88003eff875 rsp=fffff880033995d8 rbp=fffff880056d0a80
r8=00000000000005cc r9=0000000000000000 r10=00450008ce3c6211
r11=fffffa8007771298 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0 nv up ei ng nz na po nc
anodlwfx+0x2875:
fffff880`03eff875 8b040a mov eax,dword ptr [rdx+rcx] ds:fffff880`056d1048=????????
Resetting default scope

LAST_CONTROL_TRANSFER: from fffff80002e79469 to fffff80002e79ec0

STACK_TEXT:
fffff880`033992f8 fffff800`02e79469 : 00000000`0000000a fffff880`056d1048 00000000`00000002 00000000`00000000 : nt!KeBugCheckEx
fffff880`03399300 fffff800`02e780e0 : 00000001`00000000 00000000`00000000 00000000`00000000 fffffa80`07492af8 : nt!KiBugCheckDispatch+0x69
fffff880`03399440 fffff880`03eff875 : fffff880`03eff490 00000000`00000028 fffff800`02faf1ee fffffa80`0773e920 : nt!KiPageFault+0x260
fffff880`033995d8 fffff880`03eff490 : 00000000`00000028 fffff800`02faf1ee fffffa80`0773e920 fffffa80`07740bb0 : anodlwfx+0x2875
fffff880`033995e0 00000000`00000028 : fffff800`02faf1ee fffffa80`0773e920 fffffa80`07740bb0 fffffa80`074929f0 : anodlwfx+0x2490
fffff880`033995e8 fffff800`02faf1ee : fffffa80`0773e920 fffffa80`07740bb0 fffffa80`074929f0 fffff880`03efeb99 : 0x28
fffff880`033995f0 fffff880`018e44d0 : 00000000`00000000 00000000`00000028 fffff... Read more

http://www.sevenforums.com/bsod-help-support/365750-bsod-when-using-internet-ethernet-cable.html
Relevancy 65.79%

I have an Acer desktop with Windows 7, and a couple of days ago I stopped being able to connect to the internet through the ethernet port. I am certain that the problem is not with the modem or the ISP, because I can plug in my laptop with an ethernet cable and it connects normally, plus I am able to connect any number of devices (including my desktop!) through wifi on the same modem. What can I do to fix this?
 

Relevancy 65.79%

So my laptop is receiving a wifi signal, but unfortunately my desktop doesn't have a wireless card. To be able to have an internet connection in both I've read I can use an ethernet cable to share the laptop's wifi connection with the desktop.
How do I go about doing this in Win7?
 

A:How do I share internet with an ethernet cable?

You will need what is called a crossover ethernet cable, connect the 2 ethernet ports together with it, turn on Internet Connection sharing on the Laptop before you do.

http://discussions.virtualdr.com/archive/index.php/t-237754.html

.
 

https://forums.techguy.org/threads/how-do-i-share-internet-with-an-ethernet-cable.894032/
Relevancy 65.79%

I know the Ethernet cable does have a valid internet connection because i get it on my lap top. When I go under internet connections I can see that I am connected to it but it doesn't do anything. I also have a wireless internet that i can connect to but it is not that good. Anyone know how i can make it so my Ethernet cable will actually work?

A:Can not connect to internet Via ethernet cable

start > run > type in cmd and hit enter

enter the command


Code:
ipconfig/all
post the results

http://www.techsupportforum.com/forums/f10/can-not-connect-to-internet-via-ethernet-cable-407761.html
Relevancy 65.79%

I cant connect to internet with ethernet cable it doesnt even show my cable is plugged in. The cable is okey i tried other computer and i got in internet with it.

if i restart my computer it comes back for like 5 -10 mins then it disappears again shows that the cable isnt plugged in and if i disable and enable the adapter it comes back again for 5 min. please help

A:Cant connect to internet with ethernet cable.

Hey hawkin,

Try to update the drivers for your LAN card. Or, if possible get an external card and plug the cable in that and check.

http://www.sevenforums.com/network-sharing/315345-cant-connect-internet-ethernet-cable.html
Relevancy 65.79%

Hey guys I just moved house and the internet here is a lot worse than what I'm used to so wireless is not an option. I hooked up my old ethernet cable and It says that I'm connected to the internet but I cannot load any web pages or do anything online.
My wireless does work but I get 10 seconds delay on all my games.
I've tried resetting my router and I even bought another ethernet cable thinking that my 5 year old cable had gone flaky but neither worked. The 2 LEDs on my mobo are both lit up, one blinking.
Any suggestions would be much appreciated!
 

Relevancy 65.79%

For some reason, i cannot connect to the internet using my current ethernet cable. I am 100% positive that adapter is working fine, as i had maintenance come into my room and check it out, but my computer won't connect to their internet through my cable

Attached is a picture of my device manager, but even through that, it appears that nothing is wrong.

My specs are:

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM) i7-2630QM CPU @ 2.00GHz, Intel64 Family 6 Model 42 Stepping 7
Processor Count: 8
RAM: 6055 Mb
Graphics Card: Intel(R) HD Graphics Family, -1260 Mb
Hard Drives: C: Total - 262143 MB, Free - 199514 MB; D: Total - 322732 MB, Free - 322631 MB;
Motherboard: ASUSTeK Computer Inc., K53SV
Antivirus: Norton AntiVirus, Updated and Enabled
 

Relevancy 65.79%

Alright I ll make it short but informative I can t connect cable able internet Only via to ethernet to connect to the internet without an ethernet cable I have tried pressing the laptop s quot WiFi quot button but nothing has happened The light didn t even change I have tried Only able to connect to internet via ethernet cable rebooting and going into BIOS to see Only able to connect to internet via ethernet cable if there was on option there nothing I Only able to connect to internet via ethernet cable have tried going into Device Manager and under quot Network Cards quot I got options I believe I had options though now I have only first I tried to deactivate it and the reactivate it but that just made it not work at all and when I got home and got my connection back I tried to update the drivers which is when I noticed I only had because I was at school when all showed up so I didn t have connection to update them but it just said that they were all up to date I have tried using the windows recovering tool to go back before the problem occurred Though I did get an error the first time due to my AVG being up so it couldn t complete but after that I tried doing it again with AVG off but the situation didn t change and I know the problem isn t with the router as the problem occurs with different WiFi s In the beginning it would only say quot can t connect to the internet quot over and over again but now it won t even show the available WiFi networks in the area Any help is much appreciated nbsp

A:Only able to connect to internet via ethernet cable

Any suggestions at all? if you require more information in order to come up with a solution, just tell me what you need an ill try my best to figure it out
 

http://www.techspot.com/community/topics/only-able-to-connect-to-internet-via-ethernet-cable.212310/
Relevancy 65.79%

Hey everyone, got an issue that's stumping me.

I bought a new computer here at work, and am having issues getting the ethernet port to work. I know the port itself works because it worked on Windows 7 when I first got the computer, but when I got it, I immediately did a clean install of Windows 8.1(media that came with the computer so I know it's compatible). Since I've installed Windows 8.1, it hasn't worked.

Things I've tried:
-Disabling the ethernet adapter and re-enabling it.
-Uninstalling the ethernet driver and restarting the computer to have it installed again.
-Unplugging and re-plugging in the switch, router, and modem.
-Tried cable on a different computer to make sure it wasn't my cable or port.
-Tried a different cable with my current computer.

I don't know what else to do.

I get this error:

I've tried ipconfig /release and ipconfig /renew, and it doesn't change a thing.

A:Internet won't connect with ethernet cable.

In elevated command:

Code:
ipconfig/all
Post output

http://www.sevenforums.com/general-discussion/362457-internet-wont-connect-ethernet-cable.html
Relevancy 65.79%

I'm trying to get my computer hooked up for internet through this ethernet modem from at&t. I got this splitter from radio shack so the family computer (using for internet at the moment) and my computer can both be online. (family computer is a vista) it's hooked up like Vista to splitter's jack 1, splitter to modem (which works), XP to Splitter's Jack 2 and it won't work. tried swapping and XP detected the modem but couldn't connect and Vista's Died so i swapped it back. Could I have gotten a splitter with a defective jack or is it something else?
 

Relevancy 65.79%

I have a room (no wifi) and the room only have an Ethernet Cable that supply the internet to my PC.

Q1 How can I split the internet to another PC?

Q2 Is it possible have wifi? If yes how to setup?

Thanks
 

A:How to connect to internet for more than one PC with one ethernet cable

Hello skytech,

You can "split the Internet" using a wireless router (which will also give you Wifi -- see below), or you can use a switch to allow more physical connections.

------------------------------------------------------------------------

It is possible to setup Wifi with a wireless router.

You connect [what I assume you have] your modem to the wireless router.
 

https://forums.techguy.org/threads/how-to-connect-to-internet-for-more-than-one-pc-with-one-ethernet-cable.1132171/
Relevancy 65.79%

My internet keeps disconnecting and saying I need an Ethernet cable when im using a wireless adapter I recently disconnecting keeps and using I internet saying when need a y Ethernet an im wi cable bought a new PC using Windows and ever since I have started it up y internet keeps disconnecting and saying I need an Ethernet cable when im using a wi it has been having issues I am using a wireless adapter that connects to my modem which works just fine the adapter is also new but for some reason it keeps disconnecting me It loses all its bars and comes up with the symbol then comes back with full bars showing its connected It also says that I need to plug an ethernet cable onto the computer or a network cable isnt plugged in properly I have tried a lot of things and nothing is working I dont need updates whatsoever If you could help me on this I would appreciate it because it has become very frustrating Thankyou This is for a friend they couldn t upload this because their connection is terrible and doesnt last long and is continually disconnecting nbsp

A:y internet keeps disconnecting and saying I need an Ethernet cable when im using a wi

lets see an xirrus screen shot

------------------------------------------------------------------------
Run Xirrus Wi-Fi Inspector
Download and install
If you cannot access the internet with this PC, then you will need to copy the program across to the faulty PC
Save the file to a USB flash drive or other removable media. Plug it into the working computer with internet access and copy the file to the faulty PC and install the program.
You will now need to take a screen shot and copy that back to the working PC and attach the screen shot in a reply on the forum here.

If you do not have another PC - do you have a phone connected to the internet - can you photograph the result and post the image in a reply

http://go.pardot.com/l/66982/2015-01-26/2361i
enter you details
Download this file "DOWNLOAD WI-FI INSPECTOR Vx.xx "
( the site now appears to allow webbased emails like gmail, hotmail, outlook and yahoo now )

There is also a xirrus gadget, But that does not have all the fuctionality "DOWNLOAD GADGET Vx.xx

Alternative links - Use the links below
http://www.softpedia.com/get/Network-Tools/Network-Monitoring/Xirrus-Wi-Fi-Inspector.shtml
Then run and install the program - on a wireless enabled PC/Laptop
if you get an error - You will need to have NET Framework installed for the WiFi Inspector to function.
On windows 8 - (i do not have windows 8) but, it would appear that, When you first try to run, you may get a message that .net framework is needed, and included in that message is a link to download/install.

Run the program

A user guide is available here
http://www.xirrus.com/cdn/pdf/xirruswifiinspectorguide1-2-0

post a screen shot of the program running.
if there are a lot of networks showing can you click on "networks" top lefthand area - so we can see all the network information.

post which SSID name is yours, its located in the list, under network "Adapter Name" (1st column)
Note:
For a reliable (or robust as the Xirrus user guide says) wireless connection you need a signal of about -70 dBm or better. "A desirable signal level for a robust Wi-Fi connection will be green".
note: the signal level is a negative number, so for example -88 is worst and -40 is better

To post a screen shot of the active window.

Windows XP
Hold the Alt key and press the PrtScn key. Open the Windows PAINT application (Start> All Programs> Accessories> Paint) and Paste the screen shot. You can then use PAINT to trim to suit, and save it as a JPG format file.

Vista or Windows 7
you can use the "snipping tool" which is found in Start> All programs> Accessories> Snipping Tool
http://www.bleepingcomputer.com/tutorials/how-to-use-the-windows-snipping-tool/

Windows 8
you can use the snipping tool > Open Snipping Tool (From the Windows 8 Start Screen, type "snip" and press enter.
>Press the Esc. key.
>go back to your Windows 8 start screen - Swipe from left or press Window Button
>Press Ctrl+PrntScr button to use Snipping Tool
see here
http://www.pcadvisor.co.uk/opinion/windows/3415854/how-take-screenshot-in-windows-8/
http://www.pcadvisor.co.uk/how-to/windows/3405830/how-take-screenshot-in-windows-8/
To upload the screen shot to the forum, open the full reply window ("Go Advanced" button) and use the Manage Attachments button to upload it here.
Full details are available here http://library.techguy.org/wiki/TSG_Posting_a_Screenshot
 

https://forums.techguy.org/threads/y-internet-keeps-disconnecting-and-saying-i-need-an-ethernet-cable-when-im-using-a-wi.1146897/
Relevancy 65.79%

I have a home network and my only PC now is a Toshiba Netbbook with XP - I also have an Ipad and an HP wireless printer connected to the network.
The Wireless Network signal strength is excellent and the Ipad and Printer connect to the Internet but the Netbook will only connect to the Internet if I run a cable from the PC to my wireless router.
 

A:Solved: Can only get Internet via Ethernet cable

Check the wireless is switched ON
theres often a physical switch or a combination of the FN and one of the F keys to toggle the wireless on/off
often F2 is used - but note , not always - look for a symbol that looks a little like (( i ))

is the wireless on?

------------------------------------------------------------------------

What firewall / security suite or anti-virus do you currently have on the PC - or you have ever had on the PC in the past - any trial ware - like Norton, kaspersky or Mcafee or any free security suites like zonealarm, AVG , Webroot etc

can we see an ipconfig /all and an xirrus screen shot

------------------------------------------------------------------------
ipconfig /all

If you cannot access the internet with this PC, then you will need to paste the results into something like notepad and then copy onto a machine that can access the internet and post the results in a reply here.
Save the file to a USB flash drive or other removable media. Plug it into the working computer with internet access and copy the file and paste here.

If you do not have another PC - do you have a phone connected to the internet - can you photograph the result and post the image in a reply
Note: you will see entries named Tunnel adapter Teredo Tunneling Pseudo-Interface: we dont need to see that information - JUST the infomation above those entries

We would like to see the results from an ipconfig /all - post back the results in a reply here.

For Windows 8
To open a Cmd Prompt or an Administrator Cmd prompt from the Desktop. Use Win + X and choose Command Prompt or Command Prompt (Admin) from the list.​
For windows version, XP, Vista, W7
Hold the Windows key and press R

Now type CMD

Now press Enter to open a command prompt box (A new dialogue box - black with white font, will appear on screen ):​
In the command prompt window that opens, type the following command:

Note that there is a space before the /ALL, but there is NOT a space after the / in the following command.

ipconfig /all > network.txt & network.txt ​
It will export the results into notepad and then automatically open the notepad and display on your screen.

Now all you need to do is copy and paste those results into a reply here
to do that:
From the notepad menu - choose Edit - Select all
all the text will now be highlighted
Next
From the notepad menu - choose Edit - Copy

Now go back to the forum - goto the reply and then right click in the reply box and paste the results.
The results from the notepad should now appear in the forum reply.
------------------------------------------------------------------------

------------------------------------------------------------------------
Run Xirrus Wi-Fi Inspector
Download and install
If you cannot access the internet with this PC, then you will need to copy the program across to the faulty PC
Save the file to a USB flash drive or other removable media. Plug it into the working computer with internet access and copy the file and install the program.
You will now need to take a screen shot and copy that back to the working PC and attach the screen shot in a reply on the forum here.

If you do not have another PC - do you have a phone connected to the internet - can you photograph the result and post the image in a reply

http://www.xirrus.com/Products/Wi-Fi-Inspector.aspx ( the site now appears to require a business email, so try the direct link below)
Direct link to the program is here http://info.xirrus.com/Wi-FiInspectorConfirmation.html

{If the above link does not work heres alternative links

http://www.pcworld.com/downloads/file_download/fid,77196-order,4/download.html

http://www.softpedia.com/prog... Read more

https://forums.techguy.org/threads/solved-can-only-get-internet-via-ethernet-cable.1100273/
Relevancy 65.79%

I have windows 7... I am connected to a network. However it say no internet access. I am in a dorm room with 2 others why can i not connect to the internet through my ethernet cable?

A:Cannot connect to internet through ethernet cable

Need ALOT more information, without more info in my professional opinion the magic unicorn is the cause for ethernet cable troubles.

What are you attempting to connect to (Modem, Router, direct to the wall, another computer)
Did you make the cable your self or did you purchase?
Were you told you have to set a static IP, or it uses a DHCP, or you don't know?
Do the 2 other people have internet access?
Have you tried to kick it yet?

http://www.techsupportforum.com/forums/f217/cannot-connect-to-internet-through-ethernet-cable-472833.html
Relevancy 65.79%

Hi, I just built a new computer yesterday and I was using a usb wifi adapter. The wifi seemed a little slow to me so I wanted to switch to ethernet cable. I picked up a 50 foot cable at fry's and connected from the modem/router top my computer. I was told that connection would happen instantly but it didn't. I tried downloading drivers, messing around in settings, and removing the battery from my motherboard for a minute and putting it back in. The ethernet cable is not the problem since it works when i use it on the other computer that is currently on ethernet cable as well.

I'm running windows 7.
Motherboard is ASROCK FM2A88M-hd
 

Relevancy 64.93%

I cannot connect to the internet with my ethernet cable. The signal is broadcasting fine from my router, so I can connect with my wireless card, but I would rather do it directly with the ethernet. My computer fails to recognize any cable I put in and it says it's missing the driver. Windows can't seem to find my ethernet controller driver either. Thoughts?

A:Can't connect to the internet through ethernet cable. No driver?

Hi Welcome to Seven Forums ... Please fill in your System Specs ..

The Link below will help you achieve this ..
System Info - See Your System Specs
Do you have any errors in the Device Manager ? ....

http://www.sevenforums.com/network-sharing/345371-cant-connect-internet-through-ethernet-cable-no-driver.html
Relevancy 64.93%

First hello all..
I'm using Windows Vista Service Pack 2
Before vista i was using windows 7..
When using windows 7 i wasnt have any problem with connecting internet via wireless or ethernet cable..
As i said I'm using using vista service pack 2 and i cant connect internet with ethernet cable..
But with using wireless i can connect internet as well..
I tried the same ethernet cable with different computer with same modem..
And it works..
I think the problem is vista..
So anyone can help me with this problem?
I have serached about this problem before but there is wasnt any solution..
Please help me guys..
Thanks all..
 

Relevancy 64.93%

hey

hoping someone can help me out

I'm a 3g dongle to connect to the net, I previously set up the ps3 to connect through same via the wired connection.
That work fine for a bit, until I updated the firmware, Since then the PS can't seem to obtain an IP address and after setting a static IP it gives me a DNS error. On the flip side, my LAN is giving me a no internet access problem(ipv4) and also an unidentified network

I've changed the cable, released and renewed and reset the ipconfig and also flush DNS. I'm having the same problem with my laptop. Both were able to share the connection with the PS3 before.

(Pc runs windows 7 32 bit and laptop win 7 64bit)

Any suggestions?

A:LAN no internet access -when connecting to PS3 with ethernet cable

By LAN do you mean your network icon on the PC your dongle's connected to? I assume you're using a router right? This may be an insultingly simple tip, but did you power cycle that router yet?

http://www.sevenforums.com/network-sharing/241420-lan-no-internet-access-when-connecting-ps3-ethernet-cable.html
Relevancy 64.93%

Hi

i have an E-system 3115 laptop and have managed to connect to the internet using an ethernet cable to my Scientific Atlanta modem, but what i want to do is connect the ethernet cable to my Belkin Wireless G+ MIMO router and go online wirelessly.

I'm having problems doing this as it only seems to work when the cable is plugged into the laptop.

Thank you if you can help me.
 

Relevancy 64.93%

Last year this acer laptop was being used to at my mums with no problems with wireless internet I then borrowed it from my mum for about a through can only ethernet to to cable internet superhub connect year it was set up in my flat with no issues my mum wanted the laptop back so i took it down to my mums but can only connect to internet through ethernet cable to superhub it wouldnt work unless ethernet cable was attached to superhub even though it states that we have a strong internet connection It doesnt let me browse basically i then phoned virgin and they werent able to resolve problem they said that its not a problem at can only connect to internet through ethernet cable to superhub there end it is a problem with wireless adapter and would have to contact manufacturer iam really not convinced by this and and would appreciate any help that can be offered i am not the most computer literate person and dont have a clue where to begin with this after reading different forums i tried typing cmd into run and from results from this ive copied and pasted these results dont know if this helps Error unrecognized or incomplete command line USAGE ipconfig allcompartments all renew adapter release adapter renew adapter release adapter flushdns displaydns registerdns showclassid adapter setclassid adapter classid where adapter Connection name wildcard characters and allowed see examples Options Display this help message all Display full configuration information allcompartments Display information for all compartments release Release the IPv address for the specified adapter release Release the IPv address for the specified adapter renew Renew the IPv address for the specified adapter renew Renew the IPv address for the specified adapter flushdns Purges the DNS Resolver cache registerdns Refreshes all DHCP leases and re-registers DNS names displaydns Display the contents of the DNS Resolver Cache showclassid Displays all the dhcp class IDs allowed for adapter setclassid Modifies the dhcp class id The default is to display only the IP address subnet mask and default gateway for each adapter bound to TCP IP For Release and Renew if no adapter name is specified then the IP address leases for all adapters bound to TCP IP will be released or renewed For Setclassid if no ClassId is specified then the ClassId is removed Examples gt ipconfig Show information gt ipconfig all Show detailed information gt ipconfig renew renew all adapters gt ipconfig renew EL renew any connection that has its name starting with EL gt ipconfig release Con release all matching connections eg quot Local Area Connection quot or quot Local Area Connection quot gt ipconfig allcompartments Show information about all compartments gt ipconfig allcompartments all Show detailed information about all compartments Can anyone help thanks

A:can only connect to internet through ethernet cable to superhub

Hi and welcome to TSF I have moved you to networking for further help the info you posted is incomplete please follow the instructions here Pre-posting Requirements - for both Wired and Wireless Connectivity Issues
post the info here and please include a screen shot of xirrus wifi inspector this will allow the folks here more info, with which they can try to assist you

http://www.techsupportforum.com/forums/f31/can-only-connect-to-internet-through-ethernet-cable-to-superhub-759473.html
Relevancy 64.93%

I have a small problem To Cable? Please To Via Internet Xp Me Tell How Windows Connect Lan/ethernet Pro with Windows XP Pro I need to know why can Please Tell Me How To Connect To Internet Windows Xp Pro Via Lan/ethernet Cable? t it detect Please Tell Me How To Connect To Internet Windows Xp Pro Via Lan/ethernet Cable? my LAN Ethernet cable anymore Would any of you please tell me how to make it instantly connect to the internet without me having to type in my IP address or static-address amp ect in the quot Network Connections quot section of my WinXP Control Panel Background story Recently I got a used-laptop Dell Inspiron which was pre-installed with Windows XP When I plugged my ethernet cord to the back of the computer Please Tell Me How To Connect To Internet Windows Xp Pro Via Lan/ethernet Cable? for the st time it would immediately detected the internet got connected to the internet right away Special Note Of course it was originally set-up to detect the ethernet LAN line cord whenever someone connected the LAN-line Ethernet cord to the back of the computer It detected all of the drivers which are installed on the computer until re-installed Windows on it Ever since I re-installed Windows XP SP on that computer it won t connect to the internet via Mozilla or whatever else I use as a browser It won t let me access the internet even with the ethernet card cable cord connected to it My internet-connection was lost as soon as I re-installed Windows XP Please tell me how to make my Laptop computer instantly detect the ethernet card or drivers like it did before I wiped it s memory amp re-installed XP on it Thanks in advance for your time amp help

A:Please Tell Me How To Connect To Internet Windows Xp Pro Via Lan/ethernet Cable?

When you reinstalled Windows did you install all the hardware drivers?

http://www.bleepingcomputer.com/forums/t/172323/please-tell-me-how-to-connect-to-internet-windows-xp-pro-via-lanethernet-cable/
Relevancy 64.93%

Hi i have just joined so new to this. I have just joined TalkTalk and managed to get on the internet only with the Ethernet cable. I'm on windows 7 64bit system, not sure what model the router is. I have tried troubleshooting, restarting, followed instructions but nothing works, i would be sooo happy if you could help
 

Relevancy 64.93%

my year old Dell Studio laptop connects fine via wireless to home router and internet but I cannot connect through the ethernet cable I've done the troubleshooting disabled enabled the network adapter updated the drivers I'm using an ethernet cable which normally connects an XP so I know the cable's fine Device Manager says the Realtek PCI-E Gigabit Ethernet Controller is working properly I found the Receive Side Scaling value Enabled so I Disabled that Shut off radio for wireless to I ethernet laptop through internet cable? connect How the do Centrino adapter Disabled wireless adapter too Restarted not only the laptop but also did a shutdown How do I connect laptop to internet through the ethernet cable? then restart of the entire FIOS with Asus Access Point home network with all devices shut How do I connect laptop to internet through the ethernet cable? down Checked BIOS setting didn't see any setting Disabled that appeared like the ethernet controller Can't do system restore I did a Repair installation of windows Home Premium last week but even before then the System Restore failed every time I've never been successful at getting a system restore to work on any XP or pc I've tried it on even though it's enabled and purports to work The laptop had been connected primarily maybe even exclusively via the wireless for years so I quot m not even sure the ethernet has ever been connected before I'd hate to buy a new ethernet controller card if i don't have to only to have the problem be software Any ideas thanks

A:How do I connect laptop to internet through the ethernet cable?

I'd say, inspect the ethernet port on the laptop for bent contact pins. Just for grins and giggles, try another cable. Try attaching the laptop to ANY other network via ethernet cable.

http://www.sevenforums.com/network-sharing/305552-how-do-i-connect-laptop-internet-through-ethernet-cable.html
Relevancy 64.93%

Hi I m trying to set up the new lads computer in our office and I m having a problem with the LAN Im connecting with an ethernet cable and keep getting connect Ethernet using to cable Unable internet to the Unable to connect to internet using Ethernet cable Limited or no connectivity message whilst i m not a computer genius I ve followed a few steps on here so far but got no joy What I ve tried rebooting machine and router with all cables in swapping testing cable using both LAN ports on PC used alternative port on router Ran winsockxpfix flushed dns release dns checked that the relevant services are started in control panel gt services this is what i get when i type ipconfig all which means not much to me Microsoft Windows XP Version copy Copyright - Microsoft Corp C Documents and Settings Chris Harrison gt ipconfig all Windows IP Configuration Host Name Harry Primary Dns Suffix Node Type Broadcast IP Routing Enabled No WINS Proxy Enabled No Ethernet adapter Local Area Connection Media State Media disconnected Description Intel reg PRO GT Desktop Adapter Physical Address - E- C-C - E- F Ethernet adapter Local Area Connection Connection-specific DNS Suffix Description Intel reg DM Gigabit Network Con nection Physical Address - -D - C- D- B Dhcp Enabled Yes Autoconfiguration Enabled Yes Autoconfiguration IP Address Subnet Mask Default Gateway Thats about the limit of what I can find to try so any help would be much appreciated Thanks

A:Unable to connect to internet using Ethernet cable

<<Autoconfiguration IP Address. . . : 169.254.223.161>>

Have a look at the following, please: http://www.wikihow.com/Set-up-DHCP-Network-Settings-on-Windows-XP .

Louis

http://www.bleepingcomputer.com/forums/t/478179/unable-to-connect-to-internet-using-ethernet-cable/
Relevancy 64.93%

Hello So I recently moved abroad and am studying in a university residence in Europe with internet only available through an ethernet cable To have access at all it s first necessary to load a webpage in firefox cable/university internet ethernet with Odd issues and type in your username and password provided by the university each time you close out of Firefox you have to reenter your login information Unfortunately I m not particularly knowledgeable as far as networking issues are concerned but the university s residence service gave me a document that mentions configuring a proxy to connect to the internet if that says anything for reference I m using Windows My problem is that most other programs can t seem to connect to the internet - for example Skype Google chat calls are always disrupted by a network error Steam and Microsoft Security Essentials can t update I can t log in to my respective accounts from the program on my desktop though oddly enough Windows Update does work Similarly streaming video within the browser loads but never actually begins as when for example I attempt to stream a soccer match with a service similar to ESPN Opera doesn t work either as I get an error message from the university s IT service though this isn t as much of a problem All of the programs above are allowed according to my firewall settings so I really don t see what the problem would be As far as I can tell they re not blocked by the university Any help would be appreciated as I Odd issues with ethernet cable/university internet have absolutely no idea what the issue might be nbsp

A:Odd issues with ethernet cable/university internet

the university's residence service gave me a document that mentions configuring a proxy to connect to the internetClick to expand...

Mentions? You're supposed to use a particular proxy but you haven't configured it? You're not supposed to use one?

What firewall are you using?

You're trying to use these other programs while Firefox is open, right?
 

https://forums.techguy.org/threads/odd-issues-with-ethernet-cable-university-internet.1068091/
Relevancy 64.93%

I Connected internet but ethernet access through no cable will try to explain my situation as best I could I have a desktop running windows XP Professional Connected through ethernet cable but no internet access x SP and my network adapter is a Realtek PCIe GBE Family Controller The desktop is connected to the network with an ethernet cable Here is my problem Up until yesterday the internet connectivity just stopped working I am seeing a very low number of received Connected through ethernet cable but no internet access packets as opposed to the high number when it was working It is showing that it is connected to the network but I still can t access the internet Also I should mention that the desktop is at work and it is connected to a DHCP server that assigns IP addresses I have updated all the drivers and I have used Winsock Fix and Netsh but it still isn t working However the weird thing is that if assign a static IP address to it it works But I can t do this because I am not suppose to hook it up to the ports assigned to the switch for static IP s It has to be connected to the DHCP switch Why does it work when assigned a static but not if it gets an IP assigned by the DHCP server or switch Also even if I try to reset renew or release the IP when I connect again it still gives me the same IP It wont change Sorry if i m not explaining too well Again this is why i m asking for help i m not too good with these things TIA to anyone and everyone who can give me any ideas I ll try them all and i ll post back if it helps Thanks again nbsp

A:Connected through ethernet cable but no internet access

Make sure the following services are Started (Control Panel - Administrative Tools - Services).

DHCP Client
DNS Client
Network Location Awareness
Remote Procedure Call (RPC)
Open a (black) Command Prompt window:
Hold the Windows logo key and press r; in the Run box type cmd and click on OK.
Type the following command:

IPCONFIG /ALL

[Note that there is no space between the slash and ALL.]

Right click in the command window and choose Select All, then hit Enter.
Paste the results in a message here.

If necessary use a text file and removable media to copy the results to a computer with internet access.
 

https://forums.techguy.org/threads/connected-through-ethernet-cable-but-no-internet-access.1056583/
Relevancy 64.93%

Hi, I recently got Fios installed in my home. I believe there is a box the size of a power box in the back room for the Internet.All my other devices (MAC, iPod, Blueray Player) are able to recieve instant and unbelieveable internet connection except for my Dell. I have a Studio XPS Dell computer with windows 7. I plugged in the ethernet cable in the back of my computer and into the "Fios Box" but i didn't recieve any internet. Then i bought a wireless adapter and I do get internet but it disconnects me like every 5 minutes.
 

A:Unable to connect to Internet via Ethernet Cable

Hello, and welcome to TSG forums.
You might try to update the driver for your network card.
When you go into device manager, are there any yellow (?) or(!) there?
VicksX
 

https://forums.techguy.org/threads/unable-to-connect-to-internet-via-ethernet-cable.1023547/
Relevancy 64.93%

Hello guys, soo i have a wierd problem. yesterday all was good, turned my computer off went to bed. When i wake up today and turned my computer on i have no internet. i tried troubleshooting it, tried reinstalling drivers, i even used another ethernet cable and nothing works. i can go on the web through my phone via USB and sharing my phone's wifi, but other than that no internet.

This happened a couple months ago but i don't remenber what i did to fix it.
My wild guess is that it was a windows update. I'm not 100% sure but yeah. I think it updated something on startup but i was still sleepy and didnt pay attention to it.

I need serious help :\

i don't know what to provide with this help request since i'm new to the forum, soo ask away. Thanks in advance.

A:Windows 10 No internet. (ethernet cable not recognized??)

Hi and Welcome to TSF!

Does the Ethernet jack work in Safe Mode?

http://www.techsupportforum.com/forums/f338/windows-10-no-internet-ethernet-cable-not-recognized-1112857.html
Relevancy 64.5%

My house has all new cat 5 ethernet cable for the phone lines. We have cable internet with a Motorola sb 5100 modem and a wired router. What I want to know is can we use the phone line to connect to all the other computers in the house? Will we need to buy other hardware to do make this happen?

Thanks Bug
 

Relevancy 64.5%

Hi First post and borderline PC illiterate so sorry if I m slow I ve just gotten myself a shiny new PC that runs on windows and suprise suprise it s having network trouble My router is a Netgear DG GT which is non compatable with wirelessly as far as I can tell I can plug the PC directly into the router via the ethernet cable and that works but with my wireless dongle it won t even detect any networks and they re all g so it should pick them up The router is in the living room connected to my stepdad s desktop running XP so I m in my room trying to use the ethernet cable to connect my new cable laptop vista to Ethernet Getting internet via Win7 PC to my vista Getting Win7 internet via Ethernet cable to vista laptop laptop which can connect just fine This connects the PC to the network but I still can t get internet on the desktop Is there anything I can do to make this work or is the whole idea stupid Is there a simpler way without moving the router or changing it to a compatible Getting Win7 internet via Ethernet cable to vista laptop one Thanks in advance and sorry if this is meant to be in the Windows board but I ve checked so many windows help sites that I suspect it s more a network problem nbsp

A:Getting Win7 internet via Ethernet cable to vista laptop

Netgear DG834GT which is non compatable with 7 wirelessly as far as I can tellClick to expand...

what makes you think that ?

lets see the following xirrus - first that will tell us if you can detect the wireless signals to start with
Then an image of device manager all can be done while connected to the ethernet cable
and an ipconfig /all - But disconnect the ethernet cable and connect the wireless - save the results and then reconnect via cable and post back here

Is the wireless secure - do you get asked to enter a key - if so are you sure the key is correct
it would be worth deleting the profiles and try again

all details below
anything you are not sure of post back and we will explain further
------------------------------------------------------------------------
{run Xirrus Wi-Fi Inspector} Download and install
If you cannot access the internet with this PC, then you will need to copy the program across to the faulty PC

http://www.xirrus.com/library/wifitools.php
Direct link to the program is here http://www.xirrus.com/library/wifi_download_redirect.php
Then run and install the program
if you get an error - You need NET Framework installed for the WiFi Inspector to function.

Run the program

post a screen shot of the program running - if there are a lot of networks showing can you click on "networks" top lefthand area - so we can see all the network information, and also post which network "Adapter Name" (1st column) is yours on the list

To post a screen shot of the active window, hold the Alt key and press the PrtScn key. Open the Windows PAINT application and Paste the screen shot. You can then use PAINT to trim to suit, and save it as a JPG format file.
To upload it to the forum, open the full reply window and use the Manage Attachments button to upload it here.
------------------------------------------------------------------------
{Device Manager}
Post back the results in device manager
If you cannot access the internet with this PC, then you will need to copy the program across to the faulty PC
Start > control Panel {Vista set to classic view}> system > {Vista, device manager on left hand side} {XP hardware Tab, device manager button} >
windows 7
start > control panel> System and Security> Device Manager

network adaptors, click on the + > post back the devices listed there
are there any ! ? or X
post a screen shot of the device manager - network adapters

To post a screen shot of the active window, hold the Alt key and press the PrtScn key. Open the Windows PAINT application and Paste the screen shot. You can then use PAINT to trim to suit, and save it as a JPG format file.
To upload it to the forum, open the full reply window and use the Manage Attachments button to upload it here
------------------------------------------------------------------------

------------------------------------------------------------------------
{ipconfig /all}
If you cannot access the internet with this PC, then you will need to paste the results into something like notepad and then copy onto a machine that can access the internet and post results here
We would like to see the results from ipconfig /all post back the results here
-> Start
-> (XP - enter the following in the RUN box)
cmd /k ipconfig /all
-> (Vista or Windows 7 - enter the following in the Search box)
cmd /k ipconfig /all

A black box will appear on the screen -
rightclick in the box
select all
enter
control key + C key - to copy

then reply here and
control key + V to paste
------------------------------------------------------------------------

------------------------------------------------------------------------
Wireless Profiles
http://mgmcc.forumotion.net/networking-tutorials-f17/removing-an-existing-wireless-profile-t109.htm
- Vista/Windows7:
http://www.tp-link.com/support/showfaq.asp?id=214
- delete the wireless profiles
Start> control Panel> classic view> network a... Read more

https://forums.techguy.org/threads/getting-win7-internet-via-ethernet-cable-to-vista-laptop.959654/
Relevancy 64.5%

Laptop less than 3 years old.Cant connect to Eir network without using the Ethernet connecting cable connected from modem to laptop.Once every few days it will connect for a few minutes without that cable conncted,but network connection then drops out .Battery always charged.Wi-Fi light on top of keybord always comes on blue light.Thanks.

http://h30434.www3.hp.com/t5/Notebook-Wireless-and-Networking/Can-access-internet-when-yellow-Ethernet-cable-connected/td-p/5834176
Relevancy 64.5%

For the past couple of years I have been fine with using my ethernet cable until now. I recently installed AVG and after I activated the AVG firewall it stopped windows firewall. I am still connected it says but I can't use any internet browser. Please help.
 

Relevancy 64.5%

Hello I'm having problems with my Asus NV VM laptop windows Whenever I try to use an ethernet cable working (Atheros ethernet AR8161) Internet not with cable to access internet I either get a SSL-error the website Internet not working with ethernet cable (Atheros AR8161) doesn't load at all or it loads VERY slowly and not the whole website it says that I have internet acces and that it's not limited Wireless works fine though I've also tested playing some games ex Call of duty and it works fine for like five minutes and then I get an error message saying something about packages didn't receive correctly So I'm guessing it have to do with not all information is transfered when I use ethernet According to the Device Manager I use quot Qualcomm Atheros AR PCI-E Gigabit Ethernet Controller NDIS quot and the drivers is up to date Things I've tried Using a different ethernet cableTesting it on a different network at my friends house Reinstalling drivers both from Asus website and from Qualcomm's Disable wirelessEmpty cache cookiesRestarting computer router modemTurning off firewallSearching for virus didn't find any Ipconfig release renewTested it on different browsers I also affects games though Formating my laptopSSL and TSL is enable I'm not that great with computers so sorry if I'm not so clear with everything and if there is something I've missed please let me know Would appriciate some help on this

A:Internet not working with ethernet cable (Atheros AR8161)

This looks like a physical issue with your connector not picking up all 8 pins on the head rather than a setting problem since you have completed most troubleshooting techniques. If this is the case you may have to invest into another internal or external ethernet adapter.

Could you please complete the following command in command prompt and after 1-2 minutes terminate it with the following keys CTRL+C. Once done please post back your results


Code:
ping www.google.com -t



   Note
The command needs to be typed exactly as seen above including any spaces. Feel free to copy and paste if it is easier

Many Thanks,
Josh!

http://www.eightforums.com/network-sharing/27873-internet-not-working-ethernet-cable-atheros-ar8161.html
Relevancy 64.5%

Any idea chaps why my laptop connects to the internet over wifi but not if I connect the ehternet cable directly into the back?
I have checked that the driver is installed (I think) and also that the box is ticked to allocate IP address automatically...
 

Relevancy 64.5%

I have recently set up two Pc's down stairs next to each other. The plan was to use them for gaming but for the life of me i cannot get Ethernet & wifi to work at the same time.

Each Pc has its own wifi but gaming over wifi is slow and file transfers are painful. I can get it working but after around 5 min it will start defaulting all of traffic to the wifi.

I have tried over the last week everything I could find online. Renewing, flushing, sharing internet through one etc.

I have done an ipconfig /all on both machines whilst it was working then after it stops done at again but when I compared the results I cannot see any difference. :/

Any help would be awesome at this stage.

A:Ethernet gaming (crossover cable) with wifi internet.

Ovbious question perhaps but why not just use Ethernet for the one being used for gaming?
Plug in Ethernet, turn off WiFi.

http://www.eightforums.com/network-sharing/72567-ethernet-gaming-crossover-cable-wifi-internet.html
Relevancy 64.5%

Hello I have been having issues with sharing my internet connection via an ethernet cable I read online that there is the ability to 'share' your internet connection I have learned how to do this but it doesnt work for me I tried connecting my laptop I went through everything and I was able to get the connection it showed the LAN connectivity icon however there was the little yellow triangle next to it I waited but it won't connect What I am trying to do with this is be able to play multiplayer on computer games with other computers on my LAN I also tried to connect my XBox with this but it doesnt have an internet internet via ethernet Unable to cable connection share connection Any help I would appreciate Things to keep in mind The only way I Unable to share internet connection via ethernet cable could get a good internet service was through my cell phone service provider so I get my internet connection through my phone via USB tethering All of the computers I am trying this on have Windows Pro except for one

A:Unable to share internet connection via ethernet cable

You really haven't described how you have your multiple computers setup to to share a single internet service connection. For example, are you using a router that has 2 ethernet cables plugging into it and you are attempting to share the same internet service?

http://www.eightforums.com/network-sharing/32992-unable-share-internet-connection-via-ethernet-cable.html
Relevancy 64.5%

Hi
My girlfriends parents have bought a new compaq laptop with windows 7. Connected up to the internet by cable & wireless no problem.
Yesterday couldn't do either and found it nearly impossible to get into the routers settings to check them. Kept saying limited access. I've tried various things to no avail.
Then I noticed that my iphone could connect to the router, so I ruled out a router problem.
I brought the laptop home and it wouldn't connect to our router, so I'm presuming it's a settings problem. But now I'm stuck!

Can anyone help?

Thanks
Mark
 

Relevancy 64.5%

I've been having a problem for the last few weeks where my laptop wasn't recognizing my internet. When it stopped working I could see my connection through the network access, but it always failed to connect and the troubleshooter told me to restart my router. After trying a few times, shutting down and restarting my computer, doing a system restore, and a factory reset twice, I can connect to the internet through an Ethernet cable. However, now my laptop can't even see that any connections are available.

There are other computer in my house, all they all connect just fine. What should I do?
 

A:Laptop can't connect to the internet unless it's connected to an Ethernet cable

The laptops internal WIFI card has probably failed. You can get around it by using an external USB wifi adapter
 

http://www.techspot.com/community/topics/laptop-cant-connect-to-the-internet-unless-its-connected-to-an-ethernet-cable.210264/
Relevancy 64.5%

Appended below are the following log files ipconfig all TechGuy SysInfo Log HijackThis Log attach log from dds scr note this program did not create a file named dds txt ark log from GMER FSS log from Farbar ipconfig all Microsoft modem. Ethernet cannot bit cable XP 32 to access via Windows DSL Internet Windows Windows XP 32 bit cannot access Internet via Ethernet cable to DSL modem. XP Windows XP 32 bit cannot access Internet via Ethernet cable to DSL modem. Version C Copyright Windows XP 32 bit cannot access Internet via Ethernet cable to DSL modem. - Microsoft Corp C Documents and Settings Rick gt ipconfig all Windows IP Configuration Host Name D P J Primary Dns Suffix Node Type Hybrid IP Routing Enabled No WINS Proxy Enabled No Ethernet adapter Local Area Connection Connection-specific DNS Suffix Description Intel R PRO VE Network Connection Physical Address - - - A- - Dhcp Enabled Yes Autoconfiguration Enabled Yes Autoconfiguration IP Address Subnet Mask Default Gateway Tech Support Guy System Info Utility version OS Version Microsoft Windows XP Home Edition Service Pack bit Processor Intel R Pentium R CPU GHz x Family Model Stepping Processor Count RAM Mb Graphics Card Intel R G Graphics Controller Mb Hard Drives C Total - MB Free - MB Motherboard Dell Computer Corp R Antivirus None HijackThis log Logfile of Trend Micro HijackThis v Scan saved at PM on Platform Windows XP SP WinNT MSIE Internet Explorer v SP Boot mode Normal Running processes C WINDOWS System smss exe C WINDOWS system winlogon exe C WINDOWS system services exe C WINDOWS system lsass exe C WINDOWS system svchost exe C WINDOWS System svchost exe C WINDOWS system svchost exe C WINDOWS system spoolsv exe C Program Files SUPERAntiSpyware SASCORE EXE C Program Files Google Update GoogleUpdate exe C Program Files Java jre bin jqs exe C WINDOWS system svchost exe C WINDOWS system fxssvc exe C WINDOWS system wscntfy exe C WINDOWS Explorer EXE C Program Files SUPERAntiSpyware SUPERAntiSpyware exe C WINDOWS Explorer EXE C Utilities Antivirus HijackThis HijackThis exe R - HKCU Software Microsoft Internet Explorer Main Default Page URL http www dell me com myway R - HKLM Software Microsoft Internet Explorer Main Start Page http www dell me com myway R - HKCU Software Microsoft Internet Connection Wizard ShellNext http www sandboxer com redirect aspx ID amp MID JSAG S SGESDE BT L G P AAP ZS HWF R - URLSearchHook AOLSearchHook Class - EB EA-E BE- CFD- F F-C A C EAFA - C Program Files AIM Search AOLSearch dll R - URLSearchHook no name - D F -B FE- -BF - AB D D - no file R - URLSearchHook no name - B B - - d -B D- EBB BA F A - no file O - BHO Yahoo Companion BHO - D -C F - efb- B - ECA - C PROGRA Yahoo COMPAN Installs cpn ycomp dll O - BHO no name - D F -B FE- -BF - AB D D - no file O - BHO AOL Search Enhancement - EB EA-E BE- CFD- F F-C A C EAFA - C Program Files AIM Search AOLSearch dll O - BHO DriveLetterAccess - CA D E- - CF- E - - C WINDOWS system dla tfswshx dll O - BHO no name - A A- - C-A - E D - no file O - BHO AppGraffiti - F A - E - D B- - B EA C EF - C PROGRA APPGRA APPGRA DLL O - BHO Google Toolbar Helper - AA ED - DD- d - -CF F - C Program Files Google Google Toolbar GoogleToolbar dll O - BHO Google Toolbar Notifier BHO - AF DE - D - -B FA-CE B AD D - C Program Files Google GoogleToolbarNotifier swg dll O - BHO Java tm Plug-In SSV Helper - DBC -A - b-BC - C C C A - C Program Files Java jre bin jp ssv dll O - BHO JQSIEStartDetectorImpl - E E F - CE- C -BC -EABFE F C - C Program Files Java jre lib deploy jqs ie jqs plugin dll O - BHO no name - F A - B- E - A - F B D - no file O - BHO XBTBPos - FCBCCB - - B D-B -F D BEB - C Program Files Fast Browser Search IE FBStoolbar dll O - Toolbar amp Yahoo Companion - EF BD -C FB- D - F- D F - C PROGRA Yahoo COMPAN Installs cpn ycomp dll O - Toolbar no name - CCC A -B CA- -B A - F DD - no file O - Toolbar Fast Browser Search Toolbar - BB D -A - B -A -C A F EC - C Program Files Fast Browser Search IE FBStoolbar dll O - To... Read more

A:Windows XP 32 bit cannot access Internet via Ethernet cable to DSL modem.

https://forums.techguy.org/threads/windows-xp-32-bit-cannot-access-internet-via-ethernet-cable-to-dsl-modem.1097937/
Relevancy 64.5%

I recently used a program Autoruns,, and deleted some startup things I shouldn't have.. Since then I cant connect to internet, the troubleshooter for wireless adapter says the Windows wireless service is not running on this computer (WLAN Autoconfig service) and fails to start the service.
I notice on windows task manager there are only about 13 Processes running and there are usually about 20, and on Services there are about 40 running and about 100 or more stopped services. Thanks for the help

Also on startup now I have a pop up on bottom saying, Failed to connect to a windows service. Windows could not connect to the System Event Notification Service service. This problem prevents standard users from logging on to the system. As an administrative user, you can review the System Event Log for details about why the service didn't respond. And the startup and logon time is really long now
 

A:Windows 7 can't connect to internet through Wifi or ethernet cable

Sounds like you deleted the network drivers, I did this once and ill be honest unless someone here knows a trick, or you have a CD with drivers you are going to have to have a hell of a time unless you know the name of the hardware and download the right driver, thats my guess. best of luck
 

http://www.techspot.com/community/topics/windows-7-cant-connect-to-internet-through-wifi-or-ethernet-cable.200026/
Relevancy 64.5%

I am a student living in university halls where access to a residential internet network is via an ethernet cable which you plugin in your room This has been working fine however after a recent windows update - it started saying no internet access the usual ethernet connection icon but with the little yellow exclamation mark There is nothing wrong with the university network my friend s internet is working fine next door and a university IT person informed me that it is most likely my computer So the only way I have been using the internet is by doing a system restore to before the updates were installed - and the internet works fine 'No cable after Update ethernet via access' internet Windows with the ethernet cable At least twice now I have left my laptop and the windows update prompt has reached the end of the timer and automatically installed the updates - and again I get the no internet access error and have to do another system restore I am sure it must be the update but bear in mind that I do occasionally have a no internet access icon and I usually have to restart my laptop and re-insert the cable to remedy the problem I tried this several times after the updates and I still had no internet access Here s my IPCONFIG ALL log which might help - but this is after a system restore and before the updates are then installed causing the error the only way I can access the internet to post on here Code Microsoft Windows Version Copyright c Microsoft Corporation All rights reserved C Users Scott gt IPCONFIG ALL Windows IP Configuration Host Name STUDENT Primary Dns Suffix Node Type Hybrid IP Routing Enabled No WINS Proxy Enabled No DNS Suffix Search List mshome net Wireless LAN adapter Wireless Network Connection Media State Media disconnected Connection-specific DNS Suffix home Description Atheros AR X Wireless 'No internet access' via ethernet cable after Windows Update Network Adapter Physical Address - - B-F - D-E DHCP Enabled Yes Autoconfiguration Enabled Yes Ethernet 'No internet access' via ethernet cable after Windows Update adapter Local Area Connection Connection-specific DNS Suffix lancs ac uk Description Marvell Yukon 'No internet access' via ethernet cable after Windows Update E PCI-E Gigabit Ether net Controller Physical Address - D-BA-F - - DHCP Enabled Yes Autoconfiguration Enabled Yes Link-local IPv Address fe d baa c d Preferred IPv Address Preferred Subnet Mask Lease Obtained October Lease Expires October Default Gateway DHCP Server DHCPv IAID DHCPv Client DUID - - - - - E- - - - D-BA-F - - DNS Servers fe b a f e Primary WINS Server Secondary WINS Server NetBIOS over Tcpip Enabled Connection-specific DNS Suffix Search List mshome net Tunnel adapter isatap lancs ac uk Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter Teredo Tunneling Pseudo-Interface Connection-specific DNS Suffix Description Teredo Tunneling Pseudo-Interface Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes IPv Address ef fb c a f dd e Prefe rred Link-local IPv Address fe c a f dd e Preferred Default Gateway NetBIOS over Tcpip Disabled Tunnel adapter isatap home Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes C Users Scott gt nbsp

Relevancy 64.5%

Hello. I would like to wire internet to more rooms in my house. I currently have a Linksys wireless router, and I am running cat 5e to the rooms. It has only 4 ports. I need 6 ports. Is it in my best interest to find another router with 6 ports, or should I get a "switch" or "hub". Any tips appreciated. I want to keep my wireless capabilities, but be on a wired network. Also will the speed of my internet be jeopardized?

THanks,

Adam
 

A:Beginner Needs Help! Would like to wire house with Ethernet cable for internet

https://forums.techguy.org/threads/beginner-needs-help-would-like-to-wire-house-with-ethernet-cable-for-internet.738900/
Relevancy 64.5%

Ok, so I have one computer and printer connected via ethernet cables to a wireless router which connects another computer wirelessly via usb adapter.

Now I have another computer that I want to connect to the same internet connection on another port in the router, however when I connect the cable from the third computer and the router nothing happens and I still cannot connect. The thir computer is using windows xp home and the other two are using windows xp professional.

Please help. I've tried creating a new network connection, but that did not work.
 

A:Connecting computer to internet via router and ethernet cable help

We need a more detailed description of your wireless router and USB adpater... in fact all the equipment you want to work together.... list how everthing now connects together.
 

http://www.techspot.com/community/topics/connecting-computer-to-internet-via-router-and-ethernet-cable-help.141132/
Relevancy 64.5%

Hello!

Yesterday my main computer lost internet connectivity after avast! ran an antivirus scan and removed several viruses. I spent much of the day yesterday researching the possible problems and did not come up with any solutions.

My computer's OS is vista, and the network status says it is, "Connected to identifying". If there is any additional information you will need, I will gladly provide. Thank you in advance for the response!
 

Relevancy 64.5%

So saturday, my friend and i build my computer. Everything worked just fine that day. Sunday i had no problem connecting to the internet. Sunday is also the day i set up a password for my admin account.

Now when i came back from work monday, i tried to log in to my computer. As it appears, i forgot my password... (same i use on everything, so i must have messed up inputting my pass)

So i did a windows reset, since i had no CD or USB to reset my pass.

I tried installing windows, and it appears 'this copy of windows is not genuine'. I thought, okay, no prob, as long as i have all options.