There is a process running on my computer called csrss.exe
I went to http://www.processlibrary.com and looked it up and came up with 2 different things. One says it is a Trojan and needs to be removed. The same exact process name also says it is Microsoft client server runtime server and SHOULD NOT be removed.
How I am supposed to tell the difference so I do not make a mistake by either leaving it alone or removing it???
I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.
I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.
You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)
Hello and welcome to Bleeping Computer! I am HelpBot: an automated program designed to help the Bleeping Computer Staff better assist you! This message contains very important information, so please read through all of it before doing anything.
We apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here.
To help Bleeping Computer better assist you please perform the following steps:
*************************************************** In order to continue receiving help at BleepingComputer.com, YOU MUST tell me if you still need help or if your issue has already been resolved on your own or through another resource! To tell me this, please click on the following link and follow the instructions there.CLICK THIS LINK >>> http://www.bleepingcomputer.com/logreply/561994 <<< CLICK THIS LINK
If you no longer need help, then all you needed to do was the previous instructions of telling me so. You can skip the rest of this post. If you do need help please continue with Step 2 below.
***************************************************If you still need help, I would like you to post a Reply to this topic (click the "Add Reply" button in the lower right hand of this page). In that reply, please include the following information:If you have not done so already, include a clear description of the problems you're having, along with any steps you may have performed so far.A new DDS log. For your convenience, you will find the instructions for generating these logs repeated at the bottom of this post.Please do this even if you have previously posted logs for us.If you were unable to produce the logs originally please try once more.If you are unable to create a log please provide detailed information about your installed Windows Operating System including the Version, Edition and if it is a 32bit or a 64bit system.If you are unsure about any of these characteristics just post what you can and we will guide you.Please tell us if you have your original Windows CD/DVD available. Upon completing the above steps and posting a reply, another staff member will review your topic and do their best to resolve your issues.
Thank you for your patience, and again sorry for the delay.
We need to see some information about what is happening in your machine. Please perform the following scan again: Download DDS by sUBs from the following link if you no longer have it available and save it to your destop.DDS.com Download LinkDouble click on the DDS icon, allow it to run. A small box will open, with an explanation about the tool. No input is needed, the scan is running. Notepad will open with the results. Follow the instructions that pop up for posting the results. Close the program window, and delete the program from your desktop.Please note: You may have to disable any script protection running if the scan fails to run. After downloading the tool, disconnect from the internet and disable all antivirus protection. Run the scan, enable your A/V and reconnect to the internet.
Information on A/V control can be found HERE.As I am just a silly little program running on the BleepingComputer.com servers, please do not send me private messages as I do not know how to read and reply to them! Thanks!
Hi all,Upon searchng the startup list on this website I found the following entry.Clients Server Runtime Process csrss.exe X Added by the W32/Sdbot-CPF worm and IRC backdoor. The process is running on my Vista machine. I ran Malwarebytes and Superantispyware but the process continues to run. Does this mean that the computer is infected? And if so, how do I clean it out? Besides this process there are about 90 others running at the same time. Thanks for the time.
If you still have those logs from Malwarebytes Anti-Malware can you post them?If not then perform the following scans with updated databases of each of the following and run full scans:Download the following:Malwarebytes Anti-MalwarePlease download Malwarebytes Anti-Malware and save it to your desktop.Download Link 1Download Link 2MBAM may "make changes to your registry" as part of its disinfection routine. If using other security programs that detect registry changes (ie Spybot's Teatimer), they may interfere or alert you. Temporarily disable such programs or permit them to allow the changes.Make sure you are connected to the Internet.Double-click on mbam-setup.exe to install the application.
For instructions with screenshots, please refer to the How to use Malwarebytes' Anti-Malware Guide.When the installation begins, follow the prompts and do not make any changes to default settings.When installation has finished, make sure you leave both of these checked:Update Malwarebytes' Anti-MalwareLaunch Malwarebytes' Anti-MalwareThen click Finish.MBAM will automatically start and you will be asked to update the program before performing a scan.If an update is found, the program will automatically update itself. Press the OK button to close that box and continue.If you encounter any problems while downloading the definition updates, manually download them from here and just double-click on mbam-rules.exe to install.On the Scanner tab:Make sure the "Perform Quick Scan" option is selected.Then click on the Scan button.If asked to select the drives to scan, leave all the drives selected and click on the Start Scan button.The scan will begin and "Scan in progress" will show at the top. It may take some time to complete so please be patient.When the scan is finished, a message box will say "The scan completed successfully. Click 'Show Results' to display all objects found".Click OK to close the message box and continue with the removal process.Back at the main Scanner screen:Click on the Show Results button to see a list of any malware that was found.Make sure that everything is checked, and click Remove Selected.When removal is completed, a log report will open in Notepad.The log is automatically saved and can be viewed by clicking the Logs tab in MBAM.Copy and paste the contents of that report in your next reply. Be sure to post the complete log to include the top portion which shows MBAM's database version and your operating system.Exit MBAM when done.Note: If MBAM encounters a file that is difficult to remove, you will be asked to reboot your computer so MBAM can proceed with the disinfection process. If asked to restart the computer, please do so immediately. Failure to reboot normally (not into safe mode) will prevent MBAM from removing all the malware.SUPERAntiSpyware:Please download and scan with SUPERAntiSpyware FreeDouble-click SUPERAntiSypware.exe and use the default settings for installation.An icon will be created on your desktop. Double-click that icon to launch the program.If it will not start, go to Start > All Prgrams > SUPERAntiSpyware and click on Alternate Start.If asked to update the program definitions, click "Yes". If not, update the definitions before scanning by selecting "Check for Updates". (If you encounter any problems while downloading the updates, manually download them from here. Double-click on the hyperlink for Download Installer and save SASDEFINITIONS.EXE to your desktop. Then double-click on SASDEFINITIONS.EXE to install the definitions.)In the Main Menu, click the Preferences... button.Click the "General and Startup" tab, and under Start-up Options, make sure "Start SUPERAntiSpyware when Windows starts" box is unchecked.Click the "Scanning Control" tab, and under Scanner Options, make sure the following are checked (leave all others unchecked):Close browsers before scanning.Scan for tracking cookies.Terminate memory threats before quarantining.Click the "Close" button to leave the control ... Read more
Can someone please tell me how to either delete this without hazardous effects or control this damn thing I m Server Runtime Client Process so sick of it it say s it s a critical system process when I try to end process yet this thing keeps popping up ads on my desktop for porn for anything this is nothing but spam directly from Client Server Runtime Process Microsoft I m on a cable modem so this thing stays on constantly and I get sick of seeing these Client Server Runtime Process ads pop up I don t have to be on Internet explorer or any web browser for that matter for it to happen I can play a game and boom it pops up minimizes my game so if anyone can help me with this I would appreciate it fyi - this is called csrp exe it s in windows system folder I keep an active connection so I can t shut off my internet I m using windows xp Thanks nbsphttps://forums.techguy.org/threads/client-server-runtime-process.115114/
I am currently running XP Home with SP2. Recently I have noticed that when I right click on a .txt file and scroll down to 'Open With' one of the options is to open it with 'Client Server Runtime Process'. When I try to open the file with this it gives me an error stating that this application cannot be run in Win32 mode. Any idea what this is and wether it is likely to be creating any other problems with my system???
Hello Boxy and Welcome to TSF
Your system may be infected with the W32/Sdbot-LD Worm. Please follow these instructions
Scan your pc with one of these free online scanners:
Housecall. Be sure to put a check the box beside AutoClean.
You may also want to post a HJT log for one of our experts to look over.
Download and install: HiJackThis 1.99.1.
(Always create a Folder for HiJackThis anywhere but your Temp/Temporary Internet Folders or Desktop. A good place to make a folder would be in My Documents, as this is where it will save the backup files needed if there's a problem.)
Then doubleclick HijackThis.exe, and hit "Do A System Scan And Save Log". Make sure all Windows and Browsers are closed.
When the scan is finished, best to save your text file in the same folder as where you put HiJackthis.
Create a New Thread and include a fresh HJT log in HiJackThisLog Help Forum and Copy/Paste the info from your saved Hijackthis log file into your new topic.
I have two of these processes running taking up 1672 and 2396 K memory respectively, this fluctuates with what is open. I tried right click “Open File Location” which seems to have no effect. When I chose “End Process” I got a BSOD. I restarted and have been using the computer normally for an hour or so.
Tech Support Guy System Info Utility version 18.104.22.168
OS Version: Microsoft® Windows Vista™ Home Premium, Service Pack 2, 64 bit
Processor: Intel(R) Pentium(R) Dual CPU T3400 @ 2.16GHz, Intel64 Family 6 Model 15 Stepping 13
Processor Count: 2
RAM: 3963 Mb
Graphics Card: Mobile Intel(R) 4 Series Express Chipset Family, 1853 Mb
Hard Drives: C: Total - 142858 MB, Free - 80649 MB;
Motherboard: TOSHIBA, Portable PC
Antivirus: Microsoft Security Essentials, Updated and Enabled
Hi, this is a system file and having two instances of it in processes is normal, you cannot access this files location through the task manager, this is also normal.
What problems are you having, and why do you suspect something is wrong with your system, please give us more information.
i have the server with windows SP and i executed replication active directory domain controller on the new server as i have two servers all with computer in the client server 2003 problem network client/server windows expect one client computer work ok onthe problematically computer is with the windows me problem is when i shut down old server the computer with win me drop out from domain and he don t see new server when i power on old server the client computer work ok i deinstalled the win me on this computer and i installed to him win xp pro but problem is same this computer don t see new server and he don t see others client computers in network problem with client computer in the client/server network windows server 2003 what i do i tryed to make new user account but nothing i can t because of this computer don t see new server on client computer light green indicator on network adapter Realtek d all the time i use commands ping with the ip address of server with the name of server nothing ipconfig release ipconfig renew ipconfig flushdns ipconfig registerdns ip address of old server is and new server maybe problem is when i type ipconfig in dosprompt on new server i receive DNS server and DHCP plz help me thanks nbsphttps://forums.techguy.org/threads/problem-with-client-computer-in-the-client-server-network-windows-server-2003.617978/
Is there a shortcut to the Microsoft Exchange Server properties within Outlook 2003?
Usually have to go through TOOLS - OPTIONS - MAIL SETUP - "View or change existing e-mails accounts" - click "change" on next screen - then click on Next settings - THEN I am on the Microsoft Exchange Server settings....
Any easier way to get to this screen?
Try going to the Mail applet via the Control Panel.
Start >> Control Panel >> Mail
That should bring up the Mail Setup - MS Exchange Settings applet. From there you have the choices to access the E-mail Accounts, Data Files, and Profiles applets.
Hi I am having an issue Folder issue, Offline 7 Win Client Flie Server. Server 2003 sync with offline files created offline syncing back to the server I have set up a network share to be available offline on a client computer All files are available offline without Offline Folder sync issue, Win 7 Client Server 2003 Flie Server. issue Here is the issue however If I set the folder to work offline any file I create in the folder when it is offline just disappears when the folder comes back online there are no conflicts or sync failures reported in sync center If I create a new folder offline the folder does sync back to the server Any changes made to an existing file are also replicated back to the server once the share is back online So the issue is only with newly created files when the share is offline I have not been able to replicate this error on any other file server in our environment However I have recreated the issue with multiple shares with multiple Win clients on this file server Steps taken so far Checked and reset permission levels on the share Recreated new shares from scratch for testing Disabled and enabled offline files on the client computer and cleared the offline cache Check various registry entry settings Disabled cashing on the File server Tested with XP the issue does not exist with XP I have spent hours researching this error online to no avail The clients are running Windows Enterprise bit The File server is Server Standard bit with SP Any help or ideas would be most welcome
I've seen the complaints about this problem but with no clear resolution. There are some hot fixes listed that may help, updating to Windows 7 SP1 is supposed to help in some cases but nothing seems for certain.
No way for me to recreate this problem but apparently others have the same problem.
Offline created files disappear after re-connect
Browse by Tags - The troubleshooters and problem solvers... - Site Home - TechNet Blogs
Administratively assigned offline files on Win7 client disappear from server (Network Steve Forum)
The Group Policy settings in the next link may have an effect on this problem.
A friend is moving his business and the new business park that he's setting up shop in internet. network LAN server/client server only, for for USB hotspot does not have anyway to get any wired internet to his building excluding a T line which he can't justify the cost of One windows machine acts as the server primarily for Quickbooks database and there are two other windows machines that are clients reading off said database He's getting one of those usb dongles for wireless internet service for the server only the other two computers will be tethered to a smartphone for internet for QB and windows updates periodically They do NOT want to share the servers wireless connection to the other machines My only concern was if the server LAN network for server/client only, USB hotspot for server internet. will continue to try to check the LAN for internet connectivity or will it check both network connections when one fails or is there a setting I can tell them to change to ensure it knows to go to the wireless dongle for internet all the time without interfering with the workstations talking to the server over the LAN to get to the database The setup at the old office LAN network for server/client only, USB hotspot for server internet. was business class DSL they are using a relatively new Linksys router which had the DSL authentication information Thank you
I managed to find a solution this morning, for anyone that's interested, the whole article is here: Multiple Network Connections at the Same Time on Windows | Ivan Zlatev
But the short answer is, under the advanced properties of TCP/IP v4, uncheck automatic metric, set your internet to a value of 1, and the LAN to a value of 9999.
Hi I'm working on a client/server with the Java programming language and trying to figure out how to protect my server. With my current Virus/Firewall protection suite theres nothing I can do to keep out unwanted Java applications on the port I choose to allow the Java SE Binary through for clients accessing the server application. ESET Smart Security 4 is what I am using. Does anybody know of a security suite that would allow only a specific Java application to get through the firewall? I'm not to sure on this subject because my firewall is identifying any Java application as only the "Java SE Binary" and not I'm sure if you can even really name your Java application like you would something you would write in C++. Any information would be appreciated, thank you.
I'm looking at setting up windows 2003 terminal servers all over the place to replace the awful thing people are currently doing here - vncing servers with one small shared password among everyone <holding my hands over my ears for the backlash>. Don't blame me, it's another awful legacy I have to get rid of...
1. I've got to set up a Terminal Server Licensing server and was thinking about putting this on my second domain controller. I was wondering what would happen in this server dies, though. Is there some way of having resilience in this scenario? Perhaps a second Licensing server or something, the way you have 2 or more Domain Controllers?
2. Also, I know that Windows XP has an RDP client, I've used before on many occasions, but what about all the Windows 2000 clients that I still have out there. What should I do for them to access the new Terminal Servers?
I'm not 100% sure on #1, but I believe that the TS licensing becomes integrated into the AD, so if one DC goes down, the other one will be able to check licensing. On another note, if you are using the TS for administration only, I don't believe you needs the TS Licensing to be installed.
For #2, you can download the latest version of the RDP client from MS's website. It should also be available through Windows Updates, although I think Win2K isn't supported any longer, other than Critical Updates.
was trying to network my computer to the server but keep getting the message 'server not responding from client computer' can anyone help please.
Hi I am running Windows XP Service Pack I have no idea how but I believe I aquired a Trojan Server Process NT DCOM / Authority Trojan/Virus Malware or Virus of some sort I was running Mozilla Firefox when two windows popped up one of which stated quot Generic Host Process for Win Services encountered a problem and needs to close quot The other window said quot NT Authority System Error Message quot This system is shutting down Windows must now restart because DCOM Server Process / NT Authority Trojan/Virus the DCOM Server process launcher service terminated unexpectedly quot I shutdown the computer manually before the timer ran out and restarted it I disconnected the internet before the restart and immediately ran Spybot Search and Destroy Spybot left me with malware results and one trojan The trojan was in the registry I tried to remove everything however it said the trojan could not be removed DCOM Server Process / NT Authority Trojan/Virus because it was in use I selected to run Spybot S amp D on next restart I then ran Ad-Aware SE Halfway through my computer put up the Blue Screen of Death that stated quot Windows has shutdown to prevent further damage to the operating system quot I shut the computer off at that point and restarted it a few hours later Spybot ran on startup before login to my user account and yielded no results The computer restarted again halfway through the Ad-Aware scan I restarted a third time and this time it has stayed on since with no crashes and no malware in any scans I ran Hijack this and here is my log Logfile of Trend Micro HijackThis v Scan saved at PM on Platform Windows XP SP WinNT MSIE Internet Explorer v Boot mode Normal Running processes C WINDOWS System smss exe C WINDOWS system winlogon exe C WINDOWS system services exe C WINDOWS system lsass exe C WINDOWS system Ati evxx exe C WINDOWS system svchost exe C WINDOWS System svchost exe C WINDOWS system spoolsv exe C PROGRA COMMON AOL ACS AOLacsd exe C Program Files Common Files Apple Mobile Device Support bin AppleMobileDeviceService exe C Program Files Bonjour mDNSResponder exe C WINDOWS system CTsvcCDA EXE C WINDOWS eHome ehRecvr exe C WINDOWS eHome ehSched exe C Program Files Intel Intel Matrix Storage Manager iaantmon exe c program files mcafee com agent mcdetect exe c PROGRA mcafee com agent mctskshd exe C PROGRA McAfee com PERSON MpfService exe C WINDOWS system svchost exe C Program Files Viewpoint Common ViewpointService exe C WINDOWS system MsPMSPSv exe C WINDOWS system dllhost exe C Program Files Viewpoint Viewpoint Manager ViewMgr exe C WINDOWS Explorer EXE C Program Files Java jre bin jusched exe C Program Files Real RealPlayer RealPlay exe c program files mcafee com agent mcagent exe C WINDOWS system Rundll exe C Program Files ScanSoft OmniPageSE OpwareSE exe C WINDOWS system wuauclt exe C PROGRA McAfee com PERSON MpfTray exe C Program Files Musicmatch Musicmatch Jukebox mmtask exe C Program Files Common Files InstallShield UpdateService issch exe C Program Files Intel Modem Event Monitor IntelMEM exe C Program Files Intel Intel Matrix Storage Manager iaanotif exe C WINDOWS ehome ehtray exe C Program Files CyberLink PowerDVD DVDLauncher exe C Program Files Common Files AOL ee aolsoftware exe C WINDOWS system dla tfswctrl exe C Program Files Creative Sound Blaster Live -bit Surround Mixer CTSysVol exe C WINDOWS eHome ehmsas exe C Program Files Canon MyPrinter BJMyPrt exe C WINDOWS system ctfmon exe C PROGRA McAfee com PERSON MpfAgent exe C Program Files iTunes iTunesHelper exe C Program Files Google GoogleToolbarNotifier GoogleToolbarNotifier exe C Program Files Creative MediaSource Detector CTDetect exe C Program Files DNA btdna exe C Program Files iPod bin iPodService exe C WINDOWS system cmd exe C Program Files Adobe Reader Reader AcroRd Info exe C Program Files Trend Micro HijackThis HijackThis exe R - HKCU Software Microsoft Internet Explorer Main Start Page http www optonline net R - HKLM Software Microsoft Internet Explor... Read more
It would be really nice to get a response for this...
Hi for awhile now maybe times a week I ve been getting system shutdown notices with a minute countdown and the DCOM (trojan?) Process Server Terminated Unexpectedly Service Launcher following dialogue box generic host process for win services system shutdown this system is shutting down this shutdown was initiated by nt authority system also something about DCOM Server Process Launcher Service Terminated Unexpectedly these shutdowns seem to occur spontaneously I can t figure out what triggers them Ad-Aware only found some cookies and nothing major during its last scan and the problem persists I just read about using start-- gt DCOM Server Process Launcher Service Terminated Unexpectedly (trojan?) run quot shutdown -a quot to kill the countdown here s my hjt log Logfile of HijackThis v Scan saved at AM on Platform Windows XP SP WinNT MSIE Internet Explorer v Running processes C WINDOWS system csrss exe C WINDOWS system winlogon exe C WINDOWS system services exe C WINDOWS system lsass exe C WINDOWS system svchost exe C WINDOWS system svchost exe C WINDOWS System svchost exe C WINDOWS System svchost exe C WINDOWS System svchost exe C Program Files Common Files Symantec Shared ccSvcHst exe C WINDOWS Explorer EXE C WINDOWS system ctfmon exe C Program Files Common Files Symantec Shared CCPD-LC symlcsvc exe DCOM Server Process Launcher Service Terminated Unexpectedly (trojan?) C Program Files DCOM Server Process Launcher Service Terminated Unexpectedly (trojan?) Lavasoft Ad-Aware AAWService exe C WINDOWS system spoolsv exe C Program Files Common Files Apple Mobile Device Support bin AppleMobileDeviceService exe C WINDOWS System Ati evxx exe C Program Files Symantec LiveUpdate ALUSchedulerSvc exe C Program Files Bonjour mDNSResponder exe C WINDOWS system DVDRAMSV exe C Program Files Java jre bin jqs exe C Program Files Sony MD Simple Burner NetMDSB exe C WINDOWS system wdfmgr exe C WINDOWS System wltrysvc exe C WINDOWS System bcmwltry exe C WINDOWS System wbem unsecapp exe C WINDOWS System alg exe C WINDOWS system carpserv exe C Program Files Synaptics SynTP SynTPLpr exe C Program Files Synaptics SynTP SynTPEnh exe C WINDOWS System wbem wmiprvse exe C Program Files Common Files Real Update OB realsched exe C Program Files Common Files Symantec Shared ccApp exe C PROGRA Sony SONICS SsAAD exe C Program Files Java jre bin jusched exe C Program Files Lavasoft Ad-Aware AAWTray exe C Program Files PeerGuardian pg exe C Program Files Common Files Ahead Lib NMBgMonitor exe C Program Files Google GoogleToolbarNotifier GoogleToolbarNotifier exe C WINDOWS system RAMASST exe C Program Files Common Files Ahead Lib NMIndexStoreSvr exe C WINDOWS System svchost exe C Program Files Mozilla Firefox firefox exe C Program Files HijackThis HijackThis exe R - HKCU Software Microsoft Windows CurrentVersion Internet Settings ProxyOverride local F - REG system ini UserInit C WINDOWS system userinit exe C WINDOWS system twext exe O - BHO Adobe PDF Reader Link Helper - E F-C D - D -B D- B D BE B - C Program Files Adobe Acrobat ActiveX AcroIEHelper dll O - BHO Java tm Plug-In SSV Helper - BB-D F - C-B EB-D DAF D D - C Program Files Java jre bin ssv dll O - BHO no name - E D - A- EC-A -BA D E E - no file O - BHO Windows Live Sign-in Helper - D - C - ABF- ECC- C - C Program Files Common Files Microsoft Shared Windows Live WindowsLiveLogin dll O - BHO Google Toolbar Helper - AA ED - DD- d - -CF F - C Program Files Google Google Toolbar GoogleToolbar dll O - BHO Google Toolbar Notifier BHO - AF DE - D - -B FA-CE B AD D - C Program Files Google GoogleToolbarNotifier swg dll O - BHO QXK Olive - AFDA C - - D- E F- FA - C WINDOWS ksendlbtfxp dll file missing O - BHO Google Dictionary Compression sdch - C D FE-E D- -BB - C E E C E - C Program Files Google Google Toolbar Component fastsearch B E dll O - BHO Java tm Plug-In SSV Helper - DBC -A - b-BC - C C C A - C Program Files Java jre bin jp ssv dll O - BHO JQSIEStartDetectorImpl - E E F - CE- C -BC -EABFE F C - C Progra... Read morehttps://forums.techguy.org/threads/dcom-server-process-launcher-service-terminated-unexpectedly-trojan.809405/
i am having microsoft windows server for small business server Service Pack iwant to run an application build up with ASP NET amp SQL DATABASE for generating reports we are using crystal reports while running the application i am gettig an error message as File or assembly name CrystalDecisions Web or one of 2003 microsoft small Pack business windows for Service 1 server server its dependencies was not found i tried to copy all the dll files in to the bin folder still the problem is not solved Source Error Line debugging ASP NET files Line -- gt Line lt compilation defaultLanguage quot c quot debug quot true quot gt lt assemblies gt lt add assembly quot CrystalDecisions CrystalReports Engine Version Culture neutral PublicKeyToken fbea e quot gt lt add assembly quot CrystalDecisions ReportSource Version Culture neutral PublicKeyToken fbea e quot gt lt add assembly quot CrystalDecisions Shared Version Culture neutral microsoft windows server 2003 for small business server Service Pack 1 PublicKeyToken fbea e quot gt lt add assembly quot CrystalDecisions Web Version Culture neutral PublicKeyToken fbea e quot gt microsoft windows server 2003 for small business server Service Pack 1 lt assemblies gt lt compilation gt Line Line lt -- CUSTOM ERROR MESSAGES Source File C Inetpub wwwroot HomagIndiaCIS web config Line Assembly Load Trace The following information can be helpful to determine why the assembly CrystalDecisions Web could not be loaded Pre-bind state information LOG DisplayName CrystalDecisions Web Version Culture neutral PublicKeyToken fbea e Fully-specified LOG Appbase file C Inetpub wwwroot HomagIndiaCIS LOG Initial PrivatePath bin Calling assembly Unknown LOG Publisher policy file is not found LOG No redirect found in host configuration file C WINDOWS Microsoft NET Framework v aspnet config LOG Using machine configuration file from C WINDOWS Microsoft NET Framework v config machine config LOG Post-policy reference CrystalDecisions Web Version Culture neutral PublicKeyToken fbea e LOG Attempting download of new URL file C WINDOWS Microsoft NET Framework v Temporary ASP NET Files root ed b fca CrystalDecisions Web DLL LOG Attempting download of new URL file C WINDOWS Microsoft NET Framework v Temporary ASP NET Files root ed b fca CrystalDecisions Web CrystalDecisions Web DLL LOG Attempting download of new URL file C Inetpub wwwroot HomagIndiaCIS bin CrystalDecisions Web DLL LOG Attempting download of new URL file C Inetpub wwwroot HomagIndiaCIS bin CrystalDecisions Web CrystalDecisions Web DLL LOG Attempting download of new URL file C WINDOWS Microsoft NET Framework v Temporary ASP NET Files root ed b fca CrystalDecisions Web EXE LOG Attempting download of new URL file C WINDOWS Microsoft NET Framework v Temporary ASP NET Files root ed b fca CrystalDecisions Web CrystalDecisions Web EXE LOG Attempting download of new URL file C Inetpub wwwroot HomagIndiaCIS bin CrystalDecisions Web EXE LOG Attempting download of new URL file C Inetpub wwwroot HomagIndiaCIS bin CrystalDecisions Web CrystalDecisions Web EXE nbsphttps://forums.techguy.org/threads/microsoft-windows-server-2003-for-small-business-server-service-pack-1.498807/
please give the microsoft account server name to up to date my Microsoft account
I use "bay407-m.hotmail.com" - this is the default setting in my Windows Phone. Checking over the internet, it seems to be the default setting for other Windows Phones as well.http://forums.windowscentral.com/ask-question/354561-my-microsoft-account-server-name-deleted-how-i-can-add-server-name.html
When a trojan appears on malwarebytes, it says it was made by the process crss.exe. I noticed this process is vital to the system, and all the Antivirus Programs I have used do not detect it. I read in a forum that if it runs out of another file location than system32 in the windows folder, It is a virus. But the process runs out of system32. The only reason for this would be that the file was manipulated with. It constantly redirects me from my search engine, im lucky i have malwarebytes blocking the hosts, but there is no fix. Is there anyway that i can delete the current file and install a new, clean one?
Thank you In advance,
Hello and welcome to TSF.
We want all our members to perform the steps outlined in the link given below, before posting for assistance. There's a sticky at the top of this forum, and
Having problems with spyware and pop-ups? First Steps
a link at the top of each page.
Please follow our pre-posting process outlined below. Use a USB flash drive to download and transfer the tools to the affected machine, if necessary. You might like to run the Flash_Disinfector.exe on the clean machine and the flash drive first to protect against any possible transfer of infection via USB.
NEW INSTRUCTIONS - Read This Before Posting For Malware Removal Help - Tech Support Forum
After running through all the steps, you shall have a proper set of logs. Please post them in a new topic, as this one shall be closed.
If you have trouble with one of the steps, simply move on to the next one, and make note of it in your reply.
Please note that the Virus/Trojan/Spyware Help forum is extremely busy, and it may take a while to receive a reply.
I am running a Dell computer with Windows XP home with users I have no access to a & Process Launcher host Server Dcom Errors Generic Process Boot CD or Windows install disc I don't believe they ever sent one Here are my problems The Dcom Server Process Launcher message comes up and then my system starts an automatic shutdown in seconds I temporarily fixed this by going into the launcher and changing the recovery settings to take no action I am having also having Generic Host Process for Win Services has encountered a problem message pop up Lastly when I use either Yahoo or Google doesn't matter which to do a search I get a list But when I click on any of the choices I get redirected to anything but what I want If I copy and past the link I'm fine Yesterday I ran Malware Bytes Anti-Malware and got errors that it fixed and when run again showed everything was fine However today I was the only one of the four users who could log on The others just got a blue screen So I ran Dcom Server Process Launcher & Generic host Process Errors the MBA again and it found errors Again I corrected Still having issues so I did a system restore didn't help Restored back to now and come to you Here is the dds log DDS Ver - - - NTFSx Run by Sue at on Sun Internet Explorer BrowserJavaVersion AV AVG Anti-Virus Free On-access scanning disabled Updated DDD - FF- F- E B- D Dcom Server Process Launcher & Generic host Process Errors D BF Running Processes Pseudo HJT Report uSearchMigratedDefaultURL hxxp www google com search q searchTerms amp sourceid ie amp rls com microsoft en-US amp ie utf amp oe utf uStart Page hxxp www cocalico k pa us uWindow Title Windows Internet Explorer provided by Yahoo uDefault Page URL hxxp www yahoo com fr fp-yie uInternet Connection Wizard ShellNext iexplore uInternet Settings ProxyServer http localhost uInternet Settings ProxyOverride local lt local gt uSearchURL Default hxxp www google com search q s mURLSearchHooks H - No File BHO amp Yahoo Toolbar Helper d -c f - efb- b - eca - c program files yahoo companion installs cpn yt dll BHO Adobe PDF Reader Link Helper e f-c d - d -b d- b d be b - c program files adobe acrobat activex AcroIEHelper dll BHO AVG Safe Search ca f - f e- b -a e- e e c c - c program files avg avg avgssie dll BHO d f -b fe- -bf - ab d d - c program files mywaysa srchasde deSrcAs dll BHO DriveLetterAccess ca d e- - cf- e - - c windows system dla tfswshx dll BHO e - d- - f -c b dc c - c windows system hkzrjsb dll BHO AVG Security Toolbar a a -bacc- d - - a e e - c progra avg avg AVGTOO DLL BHO Google Toolbar Helper aa ed - dd- d - -cf f - c program files google googletoolbar dll BHO Google Toolbar Notifier BHO af de - d - -b fa-ce b ad d - c program files google googletoolbarnotifier swg dll BHO Java tm Plug-In SSV Helper dbc -a - b-bc - c c c a - c program files java jre bin jp ssv dll BHO JQSIEStartDetectorImpl Class e e f - ce- c -bc -eabfe f c - c program files java jre lib deploy jqs ie jqs plugin dll BHO SingleInstance Class fdad da - a - fd - c - f ac - c program files yahoo companion installs cpn YTSingleInstance dll TB Yahoo Toolbar ef bd -c fb- d - f- d f - c program files yahoo companion installs cpn yt dll TB amp Google c b - - d - b - a cd f - c program files google googletoolbar dll TB AVG Security Toolbar a a -bacc- d - - a e e - c progra avg avg AVGTOO DLL TB Starware d d -c b- bd-ae - a bc fa - c program files starware bin Starware dll uRun MSMSGS quot c program files messenger msmsgs exe quot background uRun Aim uRun ctfmon exe c windows system ctfmon exe uRun DellSupport quot c program files dellsupport DSAgnt exe quot startup uRun updateMgr quot c program files adobe acrobat reader AdobeUpdateManager exe quot AcRdB -reboot uRun DellSupportCenter quot c program files dell support center bin sprtcmd exe quot P DellSupportCenter mRun DVDLauncher quot c program files cyberlink powerdvd DVDLauncher exe quot mRun QuickTime Task quot c program files quicktime qttask exe quot -a... Read more
Hello and Welcome to TSF.
Please Subscribe to this Thread to get immediate notification of replies as soon as they are posted. To do this click Thread Tools, then click Subscribe to this Thread. Make sure it is set to Instant notification by email, then click Add Subscription.
Please note that the forum is very busy and if I don't hear from you within three days this thread will be closed.
Please note that these fixes are not instantaneous. Most infections require more than one round to properly eradicate.
Please stay with me until given the 'all clear' even if symptoms seemingly abate.
Kindly follow my instructions and please do no fixing on your own or running of scanners unless requested by a helper.
Please uninstall the following via Start->(or My Computer)->Control Panel->Add or Remove Programs if it still exists:
My Way Search Assistant<<Please read this
Please visit this webpage for download links, and instructions for running ComboFix:
* Ensure you have disabled all antivirus and antimalware programs so they do not interfere with the running of ComboFix.
Get help here
Please post the C:\ComboFix.txt in your next reply for further review.
Please re-enable your antivirus before posting the ComboFix.txt log.
Im thinking about getting windows server 2008 and building a machine for it to use as well, a server, for storage and hosting multiplayer games.
So my question is, how much faster or smoother would a dedicated game server run on a actual server machine rather than a peer to peer client machine?
Would i beable to notice the benefits? Would it be a waste of money?
It would be a huge waste of money in a home setting IMO. There is very little to be gained, and the server versions of Windows are pretty costly.
I want all incoming and outgoing data from my PC to be more secure, so I
I want to set up an SSH server on my Home PC using Cygwin, but I also want the SSH client to be on my PC. Is this possible, or do I need to have an external/second PC to act as the server? Also, if all my internet traffic goes through this SSH server, how will it affect my normal browsing? Will I have issues connecting to my regular websites (youtube, facebook, msn, yahoo, gmail, etc etc)?
Umm...that is not going to make anything more or less secure. SSH is for creating secure connections to remote systems. (Mainly for administrating) It creates a VPN in a way. It does not make your browser usage secure. Connecting to an SSH server on the local machine is pointless anyways. You are already on the local machine!http://www.sevenforums.com/system-security/240810-ssh-server-client-same-pc.html
Hi guys I m pulling my hair out here trying to understand Winsock headers My lecturer must have a sick sense of humour as he s set us the task of writing a UDP client server after only studying C for months I ve managed to get a server up and listening to a socket I ve got the client to send the message and the server to pick it up and print it to screen The remaining horrors are Read the IP address of sender and print to screen just reading to a vairiable is the bit I m stuck at Echoing the message back to sender and reading it I m a bit lost on this - can this be done with a simple swap from a send to receive socket And how does the server get the info to send C++ client/server UDP to client - may be related to above Any help you guys can give would be great nbsphttps://forums.techguy.org/threads/c-udp-client-server.659338/
My friend and I set up an FTP server and client system, it was working fine at his house (on the same connection together) and again fine at my house (on the same connection again). So we leave back to our houses and try it and it doesn't work. I have FlashfXP and BulletProof FTP Server. Are there settings I can change or someway my firewall is messing it up. Thanks,
yes please help
what "Makes" a server a server, and a client a client.
In other words, what would you expect to see running (software wise)
If you had say
if somone asked you "is that a server or a client" how could you tell ?
Hi my ultimate goal for my questions is so that my laptop can access my home LAN anywhere as long as it has the server and client VPN Internet For example I have network shares named A Z B D on my home network My laptop when it is in the LAN can just map those shares Well I want the exact same kind of direct access anywhere with the internet I've already gotten an account VPN client and server with No-IP so the dynamic IP problem is taken care of I've also created an incoming VPN connection on my LAN server and a VPN connection on my laptop and the connection actually got connected but the subnet mask is always and I cannot access the LAN The solution I'm trying right now is to use Windows Server R gotten from DreamSpark and Microsoft ForeFront actually its predecessor ISA Server which I got from an IT course I've taken which amount other things is a VPN Server However there must be an easier solution than to use Enterprise grade software right By the way I do know there are easier solutions like Dropbox but I just want to know how to do it
You need to make sure that you've got your routing and remote access server role configured correctly. You should be receiving an IP that allows for browsing the network, although netbios doesn't always work easily depending on the network topology. A couple of simple issues I've encountered are things like trying the VPN from within the network (rarely works), connecting from a network with the same subnet as the one you're connecting to (having the internal network 192.168.1.x locally and the network being connected to having the same 192.168.1.x address range), and lastly having firewalls not play nicely. I don't think you're having that issue since you've received an IP, albeit one that has a restrictive subnet mask. Start by checking the routing and remote access configuration on the server to make sure it's handing out the correct information to remote clients.http://www.techsupportforum.com/forums/f217/vpn-client-and-server-644528.html
I have just assumed responsibility for a private school LAN. We have 27 clients running win 98 and a file server running NT server. Users can reach the internet weather they log into the LAN or not. How to I amend this so they must be logged in to surf the net?
We are using a Web Ramp connected to the hub. All the clients are set to automatically configior an IP add.
Thanks In advance
i am working in a company as it admin. i am managing all system as client/server . in client machine i am using xp sp2 where as in server using windows 2003. couple of weak ago a very important file is deleted from the server. I don't know who has this file deleted . plz suggest me.
Q.how would i identify that from which machine has this file been deleted.
i have to know the user name with machine or ip address.
Q. is it possible to know the machine name and ip addess from the file of deleted machine(client).
They will not have email servers for each client progrem but I suspect that you are talking about three different services there On only one of them is your ISP acting as an email server For the other two your ISP is just providing connectivity to the internet with the email servers being hosted by other organisations goolgle for GMail and Microsoft for outlook com Thunderbird is an email client program and may well be pointed at the ISPs email server to collect email from the email account that comes bundled with the connection ISPs will frequently have many servers forming their email infrastructure but apart from having different functions in the grand scheme of things client? ISP for an email server different each Does a have they the only split from a customer PoV will be between home user and business email x ps Outlook could also refer to an email client program that could collect email from your ISP email account I Does an ISP have a different server for each email client? was assuming that your use of Outlook refered to Outlook com formerly Hotmail - the web based free email provider
Your ISP has no way of knowing what email client you are using.http://www.bleepingcomputer.com/forums/t/543590/does-an-isp-have-a-different-server-for-each-email-client/
Is it not possible to make a program be both a client & server? I'm new to the winsock control & just finished reading PINO's basic intro. I did the peer-to-peer project for client/server chat. However, I want the program to be both a server & a client so two people don't have to worry about one being the server & one being the client.
I have the code for the program to listen. However, when I put the code for it to make a connection & click the button for that code, it states "invalid operation at current state".
So is it possible to have a program be both a client & server? I think it is and maybe it needs 2 winsock controls? Any help is greatly appreciated.
game downloads bad debt consolidation re mortgage
Here you can find an example in C++: http://www.codeproject.com/KB/cpp/WSFileTransfer.aspx?df=100&forumid=288198&exp=0&select=1435288
If you want to run client and server from the same exe at the same time, you should use threads (or fork).
At work I am having an issue with my PIV card which is not being read by the information system that I am trying to access. What do you think might be the issue?
I took over supporting a sm. business that has 7 workstations, 2 networked printers and 2 local printers. The bldg. has a DSL connection and the modem goes through a router. All the workstations and networked printers connect to a single 16 port switch which is connected to a server running MS SBS 2003 r2. My question is where should the internet connect to? If I connect it to the switch everyone has internet which is fine but shouldn't I connect it to a secondary NIC in the server instead? What services would I need to configure to allow that type of configuration? Oh BTW, the server is set as a DHCP, file server.
With the internet connected to the switch directly users are reporting slow response when accessing shared files on the server, etc.
Any comments are appreciated.
If you don't need to control Internet access, the simpler configuration will just be to connect the router directly to the switch and let it be the DHCP server. Disable the DHCP server on the SBS server.
First i start a little of topic: thank you guy's for helping me on my last problem thanks.
but i have a new 1 for you
I'm trying to connect over VPN to a other pc there both on the same network so i try locally first it works.
After that i go trow my router i port mapped port 1723 TCP and UDP to the server and 500 and 50 and 51 and 47 all TCP and UDP after i did this is try connecting going to the outside.
And what happens then:
everything looks well at start than i get the “verifying username and password” screen then it just dies out slowly and pain fully.
Do i just miss a port or what ?
Anybody had this problem and fixed it ?
Thanks for reading my post.
A friend gave me a PC from his job. However it has a Novel Client Server login and clicking the X or hitting cancel or OK won't get me in. It has the spaces to fill in the server and tree ecDoes anyone know how I can bypass or disable this so I can get into windows?
Thanks in advance for any help I get.
Have a Thinkpad A M- - TU Intel Pro Mini combo adapter with NIC and K modem running Windows Professional SP I attempted to connect to LAN domain controller is SBS Followed step by step instructions as per Microsoft s SBS domain - W K client configuration on Client SBS4.5 Server W2K and have other W K Pro clients running with no problems In attempting the configuration of the A M at the point where I submit the username password and domain I have received Semaphore Timeout errors Only periodically does the A M actually receive packets from the domain server and then the number is very limited I have also installed the latest drivers for the NIC from Intel and the latest Priority Packet software Ran PC-Doctor test on Network card Network Test Passed I have tried W2K Client on SBS4.5 Server it with a static IP address previously I could only get an intermittent ping response from the domain server when attempting W2K Client on SBS4.5 Server to connect to the domain but then nothing If I check the packet activity on the W K client it is receiving sporadic packets but nothing substantial Some attempts to connect to the domain with the username password and domain get incoming packet activity from the domain server but then I receive the quot semaphore timeout quot error Other similar attempts within minutes of the previous one sees no incoming packets Are there configuration settings for the adapter in the quot Advanced quot tab that I should be looking into This is the list of properties and current settings Adaptive Inter-Frame Spacing - Adaptive Link Response - Off Adaptive W2K Client on SBS4.5 Server Technology - On Adaptive Transmit Threshold - Coalesce Buffers - Enable PME - No Action Link Speed amp Duplex - Mbps Full duplex Locally Administered Address - PCI Bus Efficiency - Disabled QoS Packet Tagging - Disabled Receive Buffers - Respond to Flow Control - On Smart Power Down - Disabled Transmit Control Blocks - Am at a loss Any ideas Or should I just assume that the NIC is cooked thx in advance Jason nbsphttps://forums.techguy.org/threads/w2k-client-on-sbs4-5-server.51232/
I want all incoming and outgoing data from my PC(Windows 7 ultimate) to be more secure, so I
I want to set up an SSH server on my Home PC using Cygwin, but I also want the SSH client to be on my PC. Is this possible, or do I need to have an external/second PC to act as the server? Also, if all my internet traffic goes through this SSH server, how will it affect my normal browsing? Will I have issues connecting to my regular websites (youtube, facebook, msn, yahoo, gmail, etc etc)?
I have a client that is trying to share data from a server (server 2003) to workstations (XP home) at multiple remote locations through RDP. Remote Desktop will allow me to show drives from the local machines in the Remote Desktop session but I would like the server shares/drives to appear on the local machines. That is to say, I would like for the connecting local devices, drives feature of RD to work in the other direction. Anyone know of a way to do this? Thanks in advance
As I google for this all I find is ways to install the cisco vpn client on 2k3. I have a 2k3 domain setup with routing and remote access, pptp and l2tp vpn's running. Is it possible to use the cisco vpn client on my client machines, xp, vista, 7 to connect to the server?
Hi all I 5 interruptions TCP client/server second am currently working on 5 second TCP client/server interruptions a project that is giving me trouble for quite some time now Using c and VS I wrote a client and server application that is TCP IP based on a really basic level The project idea is simple A server sends some image data to a client Later on to multiple clients The amount of data may change depending on how fast the server can acquire images e g webcam fps MB s or more By design the client server connection must not be delayed 5 second TCP client/server interruptions sine all delayed data is immediately thrown away I know some of you will say quot use UDP quot but since it obviously should also work with TCP and I don't want to lose any packages at all I want to use TCP During server client execution I now noticed some unexpected image freezes Observing the process monitor's task manager's I O tab I noticed a second delay during each of the freeze periods These freezes are occurring randomly and I cannot reproduce them at will Here is a log print of the data rate per seconds MB s MB s MB s MB s MB s MB s MB s MB s MB s MB s MB s MB s First I thought that the sdk I'm using had some problems with winsockets Therefore I also implemented a version of both server and client using another c sdk and later on for confirmation java Testing all combinations on MS Windows I realized that the error is occurring with each server client combination Then I checked the same portable java code on XP and Linux systems The result was that on XP and Linux the server client system worked without any freezes On Windows it did not And since I have no idea what the problem could be I am now asking you the community for some ideas I already tried to turn of the Nagle algorithm that according to some forum post may sometimes cause problems Using Google I've found a link to a similar question But for me none of those answers are helpfull I also tried the suggestions in the following forum I guess since the problem is only occurring on Windows systems something has to be different in the way Windows handles TCP connections compared to Windows XP Thanks in advance for any responses
Sorry for the confusion in my steps, for steps three, it can be also applied into the Windows Vista later. So you can try the command on Windows 7 for disabling SMBv2.
After that, please let me know the result.
Besides, I'm not familiar with the script, so I'm afraid I couldn't help you to check this.
Thanks for your understanding.
I have a small domain set up in my house for my MCSA studies. I'm using Virtual PC and have a Windows Server 2003 Enterprise Edition DC/DNS server and one XP Pro Client. Server01 and Client01.
I have created a User account for myself in Active Directory and am a member of the Domain Admins. Client01 is shown as a member of the domain both in AD and in it's own System Properties. I can ping the server from the client and access it in My Network Places. However, I cannot ping the Client from the server, nor can I access Client01 from My Network Places on the Server.
I am also able to log on to the client using my domain username and password. This has me stumped.
There is no firewall running on either machine. I even checked IE security settings but that isn't the problem. Any ideas on this would be greatly appreciated.
For many years I have been using Ventrilo as a non-SIP based Voip program due to its simplicity. It works great, but the codec is dated, and the program is loaded in so many proprietary shackles it is ridiculous (aside from that creepy tracking feature.) However, one nice aspect is that it uses TCP for its voice packets (so they all arrive sounding normal.)
I tried using Mumble, but it only has a TCP mode as an afterthought and you cannot configure servers to force TCP mode for all clients. I do like how it is encrypted though (few actually bother with this.)
Does anyone know of something like Vent/TS/Mumble that uses Opus or a similar high quality codec, without tracking features, and uses TCP? I would really prefer not to have to program something entirely myself...
Can't just block UDP so clients can only connect via TCP?
What about uMurmur?
Hey there I am in an odd situation I like to play Warrock a free online multiplayer game check it out btw My lappy has Wireless VPN ICS system with and VPN Lan on Server, XP pro on same Client card i use to connect VPN Server, VPN Client and ICS on Lan on same system with XP pro to crappy router when router stalls i have to switch it off on again this causes my network adapter to get in quot media disconnected state quot which causes warrock to prompt me quot No connectivity quot and throw me out of the game So i though a good solution would be to create a VPN host on my XP pro Then crate a VPN client and connect to the local VPN host This part works well This way I always have atleast always-on connection so I can reset my router and when packets start getting through again my game will resume from same location happy happy also I enabled ICS Internet Connection Sharing on the wireless connection so VPN host can forward packets to the Internet via it the problem is it doesn t work while my VPN client is in connected mode i cannot access internet even via firefox if you need to know metrics or other info following is dump for quot netstat -r quot Here the is my static IP of my router and is dynamic on VPN client connection HTML Active Routes Network Destination Netmask Gateway Interface Metric I would really appreciate your help Thanks Cassamine nbsphttps://forums.techguy.org/threads/vpn-server-vpn-client-and-ics-on-lan-on-same-system-with-xp-pro.647875/
Hey all I have workstations and one server and we re having trouble keeping the workstations connected to the shared drives on our server I think that it might be a DNS error but don t know how to isolate it Our network is configured as follows DNS; Server-Client-Internet... clients connecting to our router and server also connected to our router and our router then is connected to our modem The DNS on our server is set to be static with a preferred DNS of x x x and nothing for the secondary Our client machines are using the DNS provided to us by our ISP which is x x x and a secondary of x x DNS; Server-Client-Internet... x Now my question is should our server be using the ISP DNS settings or should the client machines be using the server DNS setting or should they all be using the same thing and if so how will that impact our connecting to our domain and or the internet Also you might be able to shed some light on the fact that our windows clients seem to be able to connect to our server much faster and more efficient than our WinXP boxes and don t lose connectivity Do you know why that is Thanks in advance nbsp
I've spent the best part of a month trying to get a VPN connection from a Windows Ultimate client to a Windows Pro server After all of the client Server from VPN W7U W8.1 problems Pro to below I have today managed to get a VPN connection from the W client to the W server but Network and Sharing Center on W says 'RAS Dial In Interface Public Network Access Type No internet access' and although the W client shows that the connection was successful I can't see the VPN network I have VPN problems from W7U client to W8.1 Pro Server no actual access to ANYTHING on the W PC Below are details of the configurations Connections The W client is connected to the internaet via 'Internet Sharing' on my Nokia Lumia The W Server is connected via my Virgin Super Hub router So both the server and the client have different WAN 'external' IPs Router The WAN IP although I haven't paid for static ALWAYS stays the same After multiple failures I've changed the default gateway on the server W from to so as to avoid IP clashing I can get access to the internet so there appears to be no connectivity issues associated with the change of Gateway IP I've opened the following ports on my Virgin Super Hub TCP TCP amp UDP TCP amp UDP UDP UDP TCP UDP TCP amp UDP ALL pointing to the W PC at Initially I opened only but with no success it was only when I opened the others that I connected to the server I've allowed pass through on Ipsec PPTP and 'Multicast' Windows VPN Client PC I've successfully set up a VPN connection to the W server PC Using the Virgin Super Hub router WAN IP that is current and regularly checked via the Network and Sharing Center Windows VPN Server PC I've successfully set up an 'Incoming Connections' via the Network and Sharing Center I've created a user and recorded the username and password for such I've ticked the IPv IPv 'File and Sharing for Microsoft Networks' and the QoS Packet Scheduler boxes in the 'Incoming Connections' properties I've allowed all of the above ports through the firewall I've allowed Remote acces to the computer via System Properties Remote ALL files etc are set to 'Shared' and they can be accessed via Homegroup from the W pc I'm at a loss to understand why even though the client declares that a VPN connection has been made that there is no actual access to ANYTHING AT ALL on the server nor when the W client declares that there is a VPN connection to the W server is there any internet access on the W client I respectfully ask for your guidancehttp://www.eightforums.com/network-sharing/65176-vpn-problems-w7u-client-w8-1-pro-server.html
In our office we have one server and about 15 clients.
When the server goes down or reboots there is no Internet.
Why can't a client get internet when the server is down.
Is it a DNS issue?
The server is connected to the switch, and I have a spare box that i was thinking i could put a backup of that service.
DSL modem> 24 port switch> SERVER, CLIENTS.
I ve built several desktop computer one of for client a Need build PCs 8 server to which is pretty Need to build a server for 8 client PCs high-end But I ve never worked with a server before and I don t know what the differences are I also need to get this done pretty quickly -- like I need to have a list of parts by next week Below are the requirements and further down is a list of parts I used to build the high-end computer about yrs ago I m thinking the server could just use updated versions of those parts They were all purchased at www newegg com The web server is used to provide access to interviews in web mode as well as project management and reporting over the web To ensure reporting activities do not impact data collection the number of servers required is dependent on the expected load This server s has to be installed and configured onto your domain prior to Voxco installation The web server s must be a dedicated machine for Voxco s solution and should run only the web server software Operating System -- Microsoft Windows R Standard Edition Server -bit latest service pack Hardware -- Server-class machine with Dual Quad-Core Xeon Opteron Processor with a minimum of GB RAM Memory is function of your project volume and number of seats on the field Software -- IIS or IIS with II Compatibility mode for Windows and Microsoft NET Framework must be installed Disk capacity -- Typically Gb Hard disk Compared to modern hard disk capacity disk space is not critical on the web server s Networking -- Gigabit TCP IP enabled link to a switch PARTS USED FOR DESKTOP COMPUTER ASUS DRW- B ST BLK B AS Black SATA X DVD Burner - Bulk - OEM Item N E Corsair Obsidian Series D CC DW Black Aluminum Steel ATX Full Tower Computer Case Item N E BYTECC Bracket- Inch HDD SSD Mounting Kit For quot Drive Bay or Enclosure Item N E ASUS EN SILENT DI GD V LP GeForce GB -bit DDR PCI Express x Low Profile Ready Video Card Item N E COOLER MASTER Silent Pro Gold Series RS - GAD -US W ATX V v EPS V v SLI Ready CrossFire Ready PLUS Item N E Arctic Silver AA- G Thermal Compound Item N E CORSAIR Vengeance GB x GB -Pin DDR SDRAM DDR Desktop Memory Model CMZ GX M X C Item N E Intel BOXDX TO LGA Intel X SATA Gb s USB ATX Intel Motherboard Item N E Intel Core i - K Sandy Bridge-E GHz GHz Turbo LGA W Six-Core Desktop Processor BX i K Item N E XIGMATEK Dark Knight II SD Night Hawk Edition CPU Cooler with Stealth Aerospace Industry Thermal conductive ceramic coating Item N E Crucial M CT M SSD quot GB SATA III MLC mm Internal Solid State Drive SSD Item N E x Seagate ST NM TB MB Cache SAS Gb s - OEM LSI MegaRAID SAS - i LSI PCI-Expre areca CB- P- SFF- Inernal MiniSAS to SFF- nbsphttps://forums.techguy.org/threads/need-to-build-a-server-for-8-client-pcs.1156663/
When Trying to connect wireless from my laptop to another laptop I am getting the following message:
TCP Client Error
Error while trying to connect to the server: Connection time out: Connection
What do I need to do to correct this error?
Thank you in advance.
Hello I have a Gateway Laptop running Vista In the Browser isass csrss Vundo, Infected Definite with & Possible issues. the culprit. Process W32. be may Trojan/Spyware. last couple weeks I Infected with Trojan/Spyware. Possible Vundo, W32. Definite Browser issues. Process csrss & isass may be the culprit. have received noticeable issues mainly related to my browser both with Firefox and Internet Explorer I get numerous pop ups and often pages won t load properly My friend used he s flash Drive on my computer and the next day in lab class the college computer scanned the drive as having the W Trojan This leads me to believe that the same Trojan is on my system and came form my system I went to Process Library com and typed every process in These came back as Infected with Trojan/Spyware. Possible Vundo, W32. Definite Browser issues. Process csrss & isass may be the culprit. virus malware processes csrss exe isass exeThese came back as possible malware or windows process taskmgr exe winlogon exe traybar exeThese came back as unknown or undetermined processes sttray exe CEC MAIN exe zokemita exeThe zokemita came back as a completely unknown process and when I did a google search only results came back Two of which had links to a forum on this site and referenced connection to the Vundo Trojan I did download Symantec Security Response - W Blaster Worm Removal Tool and had it do a full scan of my system It wouldn t run in a normal boot but it was able to do a full scan in safe mode Unfortunately or fortunately it came back a not having found and sign of W From here I don t know what to do I have listed the system information of a dxdiag run I just did If you want the full scan let me know I ll post it That s for your time and help ------------------System Information------------------Time of this report Machine name TAMMY-PC Operating System Windows Vista Home Premium Build Service Pack vistasp gdr - Language English Regional Setting English System Manufacturer Gateway System Model T- u BIOS BIOS Version Processor Intel reg Pentium reg Dual CPU T GHz CPUs GHz Memory MB RAM Page File MB used MB available Windows Dir C Windows DirectX Version DirectX DX Setup Parameters Not found DxDiag Version bit Unicode
The processes you listed are legitimate as long as they are in the correct file pathDo not delete any of them--------------------------The process of cleaning your computer may require you to temporarily disable some security programs. If you are using SpyBot Search and Destroy, please refer to Note 2 at the bottom of this page.Please download Malwarebytes Anti-Malware and save it to your desktop.alternate download link 1alternate download link 2Make sure you are connected to the Internet.Double-click on mbam-setup.exe to install the application.When the installation begins, follow the prompts and do not make any changes to default settings.When installation has finished, make sure you leave both of these checked:Update Malwarebytes' Anti-MalwareLaunch Malwarebytes' Anti-MalwareThen click Finish.MBAM will automatically start and you will be asked to update the program before performing a scan.If an update is found, the program will automatically update itself.Press the OK button to close that box and continue.If you encounter any problems while downloading the updates, manually download them from here and just double-click on mbam-rules.exe to install.On the Scanner tab:Make sure the "Perform Quick Scan" option is selected.Then click on the Scan button.If asked to select the drives to scan, leave all the drives selected and click on the Start Scan button. The scan will begin and "Scan in progress" will show at the top. It may take some time to complete so please be patient.When the scan is finished, a message box will say "The scan completed successfully. Click 'Show Results' to display all objects found".Click OK to close the message box and continue with the removal process.Back at the main Scanner screen:Click on the Show Results button to see a list of any malware that was found.Make sure that everything is checked, and click Remove Selected.When removal is completed, a log report will open in Notepad.The log is automatically saved and can be viewed by clicking the Logs tab in MBAM.Copy and paste the contents of that report in your next reply and exit MBAM.Note:-- If MBAM encounters a file that is difficult to remove, you may be asked to reboot your computer so it can proceed with the disinfection process. Regardless if prompted to restart the computer or not, please do so immediately. Failure to reboot normally (not into safe mode) will prevent MBAM from removing all the malware. Note 2:-- MBAM may make changes to your registry as part of its disinfection routine. If you're using other security programs that detect registry changes (like Spybot's Teatimer), they may interfere with the fix or alert you after scanning with MBAM. Please disable such programs until disinfection is complete or permit them to allow the changes. To disable these programs, please view this topic: How To Temporarily Disable Your Anti-virus, Firewall And Anti-malware Programshttp://www.bleepingcomputer.com/forums/t/222472/infected-with-trojanspyware-possible-vundo-w32-definite-browser-issues-process-csrss-isass-may-be-the-culprit/
I need some expertise "know how" in this matter. I have an office in location A and another office in location B.
A is protected by Firewall-1 Checkpoint and running Exchange 5.5 mail system. Point B is using Proxy Server 1.1 and Exchange 5.5.
Office A is the HQ and Office B is the branch. I need to sync the Exchange for these 2 offices. How do I go about doing it?
I intend to use only VPN remote client access to login users from Location B to Location A. By doing so, I dun think I sync my Exchange on both end but at least I can control those those login in via VPN.
Ideas/advices much appreciated.
are you using the vpn that comes with the OS or a third party client?
What is the difference between client OS and server OS
Can we install exchange server in a OS which is designed for home use like windows 95,windows xp home...etc
No, Exchange is only for Windows 2003 and 2008 Server.
Ok I m the quot tech guy quot at the jewelry client Novell server and Solved: XP store I work at I use quot because I really only have a little more than basic knowledge but thats a step up from everyone else and I ve run into a problem We have a network here that predates me and it consists or workstations Solved: Novell server and XP client and a server running Novell Netware version I think the version is under that much I know Recently I formatted and reinstalled xp pro onto an old desktop and I ve been trying to connect to the server with no luck I have installed the Novell Client software onto the workstation but the server will not be recognized i ve tried using the server name as the tree name as well as the server name I tried using the search option to look for computers and people to find the server but with no luck I m running out of ideas anyone have any nbsp
I'm not sure if it's the right forum, but I'm having trouble connecting my client/server in my virtual PC. they just aren't seeing each other when it comes to connecting them to continue my server class.
not sure what info you need to from me, so sorry if I sound like am idiot.
running on virtual PC
I'm running windows 7 on my computer
I'm running Filezilla Server on a custom built Server, client issues Filezilla FTP box I have Filezilla Server, FTP client issues set all my users up and their passwords I set their permissions to have correct permissions to modify create delete append and create directories and delete directoris My users use filezilla client as well as Windows Explorer to do transfers to and from the server My problems are when i first create user accounts i and my users can cut move and delete but after - minutes or so or after making a few transfers with the ability to cut delete through windows explorer the ability is lost with an error that pops up stating quot Invalid Handle quot On the Client Side we use Windows Filezilla Server, FTP client issues explorer more so than file zilla client file zilla will always allow us to delete but my question is why do i loose the ability on my clients to move and delete though the settings state the same as i set where i have set them Can anyone shed some light onto as why i lose this ability Please help with this Thanks Jon
Does this only happen in the time span specified, or after a reboot aswell.?http://www.sevenforums.com/network-sharing/181679-filezilla-server-ftp-client-issues.html
Hi guys I m pulling my hair out here trying to understand Winsock headers My lecturer must have a sick sense of humour as he s set us the task of writing a UDP client server after only studying C for months I ve managed to get a server up and listening to a socket I ve got the client to send the message and the server to pick it up and print it to screen The remaining horrors are Read the IP address of sender and print to screen just reading to a vairiable is the bit I m stuck at Echoing the message back to sender and reading it I m a bit lost on this - can this be done with a simple swap from a send to receive socket And how does the server get the info to send to client - may be related to above Any help you guys can give would be great nbsp
I'll move you over to development, probably a better chance of a response here.
ok so im kind of new to networking and etc Here is my problem im running a server on my pc it auto-detects lan ip and wont connect to wan ip for some reason i can t change lan ip or wan ip it auto-detects it and if i use a VPN service ex Hamachi EasyVPN my server crashes assuming that it tries to use both ips as lan I have been searching the internet for a way to make the server online so i ran into the option mapping connect to Client to lan? server by [Help] wan NAT allowing to map external ip wan ip to internal ip lan ip would this work for my server Code client gt gt WAN IP gt gt NAT Router gt gt LAN IP gt gt Server normally a client only connects to the server using wan ip im using a router Code Client gt gt WAN IP gt gt Router gt gt WAN IP gt gt Server but the server wont accept incoming wan connections any ideas nbsphttps://forums.techguy.org/threads/help-client-connect-to-server-by-mapping-wan-to-lan.983070/
i am trying to install microsoft Sql server 2005(enterprise edition) on windows Xp service pack 2, but it installs only the client components. can someone please help me out how i can install the server component as well. so that i can use it to create databases and manage databases. thank you
I need to know about the procedure/software to test the speed of data transmission (i.e uploading & downloading of same size/format file) from my client PC to Server PC. The time taken by Client to ping the server and vice versa.
In our organization we have a server PC in Head office and have outstation clients. We have best internet services but still facing issue while pinging from client to server. in outstation we use IVPN to connect server.
DOS Client cannot connect to XP Professional SMB Server Please forgive the length of this message I am trying to be comprehensive Let me first describe all of the contenders involved in this little affair I have one MS-DOS client that I will call DOSM one Windows XP Professional system connect to cannot (Professional) Client Server DOS SMB XP that I will call XPM and a laptop also running XP Professional that I will call XPLT The DOS Client cannot connect to XP (Professional) SMB Server three above computers are connected via a network hub not a switch The goal is to successfully connect DOSM to XPM via NetBIOS over NetBEUI The problem obviously is that they cannot currently connect As I just mentioned DOSM is running DOS and using NetBIOS over NetBEUI I have the other two systems XPM and XPLT configured DOS Client cannot connect to XP (Professional) SMB Server to support the NetBEUI protocol I have created shares on XPM and XPLT configured file system permissions and configured share permissions for the DOSM user to connect I am not using the XP s simple file sharing scheme but am requiring real user and password authentication Interestingly enough DOSM CAN connect to XPLT without issue but can not connect to XPM First I tried to eliminate all of the standard mishaps associated with such a problem I started by checking the XP firewall settings and I believe they are acceptable I have tested this connection with the firewall disabled I have checked DOS Client cannot connect to XP (Professional) SMB Server both group policy system settings and the security template for both machines XPM XPLT attempting to remove differences between the two or to see a potential reason why XPM would not authenticate the DOSM user while XPLT would authenticate I saw no appreciable difference in security settings between XPM and XPLT Next I tried looking at the specific error received on DOSM When attempting to connect to XPM I receive the following Error Access has been denied This is not the most helpful error message that I have seen in my time but so be it Checking XPM reveals slightly more information I receive two errors in the security log of XPM that are of relevance here EventID This error message provides the DOSM user account connecting to XPM the username is correct and an error code xC A EventID Unknown user name or bad password After a little searching I quickly discovered that error xC A means that the client attempted a logon with a bad password Interesting says I So it appears that DOSM is logging on XPM with the correct user name but providing a bad password please remember that DOSM can connect to XPLT Dig a little deeper Viewing the network traffic between DOSM and XPM does not lend much more information I have come to understand that the base protocol in question here for authentication reasons is SMB server message block During the initial handshaking that takes place the two machines are supposed to determine an authentication scheme to use and then authenticate based on that scheme DOSM provides XPM with a list of those schemes that it supports DOSM supports the following authentication schemes PC NETWORK PROGRAM MICROSOFT NETWORKS DOS LM X It is my understanding that DOS LM X is essentially the same as Lanman but provides DOS compatible error codes XPM responds to negotiate the protocols with the authentication scheme it chooses to use XPM says back Dialect Index Greater than CORE PROTOCOL and up to LANMAN I am still slightly confused about which protocol it is really choosing here Is XPM picking MICROSOFT NETWORKS or DOS LM X Perhaps this is the answer to the problem It is clear that XPM is running in USER security mode and wants to receive both a username and an encrypted password what it calls a challenge response Anyway after choosing the authentication scheme and demanding a username and password XPM waits for a response from DOSM DOSM promptly responds with a username and encrypted password This is where things break... Read more
I have a NT Terminal Server 4.0 set-up with Microsoft client, as well as, Novell client. I can logon to the Administrators account just fine. When I log-on using someone else, I get an error stating that the logon script didn't take effect.
-An application error has occurredand a log file is being generated "nwlscrpt.exe"
-Then it looks for DrWatson log file directory and doesn't find it
-"Cannot open DrWatson log file
-"Windows NT error code=0
What do yo think this might be??
I think you should reinstall the client... Or isntall the ms novell client. That works for me.
No mail server client came with W7, that i can find, any recommendations? Thx Dorothy
Microsoft wants you to use Live Mail. I use Outlook, but Thunderbird and possibly others are options.http://www.sevenforums.com/browsers-mail/52349-no-mail-server-client-any-recommendations.html
Over the last year a co-worker and I have been developing a complex Job-Costing system in a Microsoft Access Database (4.0). It is a 50 Meg file that is on our Server. The problem is that only one person can Access the Database at a time. This is going to be hell when we accually release this to the other 15 people is the office. I have experimented with an access 2000 Project (MSDE Client/Server) but I dont think it is the option for our office. I was wondering what was needed to make our database multi-user. It says it can handle up to 255 multiple users, and 1 user is far from that limit.
Please give me all the information you can. Thanks.
Tools-Options, Advanced (I think) tab. Default login should be SHARED, not EXCLUSIVE.
In our organization we ve got about computers or mobile users about a combined gb of data up until now we ve been using a rd party online backup solution to keep the help Need with Solutions Client/Server Backup users documents and outlook data backed up The more the data grows the Need help with Client/Server Backup Solutions more the monthly price grows and is becoming a budget problem We have windows server standard machines and I m building a sandboxed environment replicating the current users connected to the domain getting ready to test debug deploy windows server and some vista clients on the server I ve tried setting up backup schedules with windows backup ntbackup exe and its not doing what it s supposed to Every time I set up a schedule and wait for the right hour mins mins whatever for the backup test it doesn t work too well I need a cost effective solution to replace our online backup service It doesn t matter if we don t end up upgrading to windows server vista I m simply building a test environment to compare security and performance We have like I said about desktops - XP SP Outlook and some documents etc about laptops - XP SP Outlook documents etc production file dns dhcp server Windows Server SP The outcome I d like the server to be able to backup all users documents outlook data at regular intervals so if the mobile users go out of the office for a few hours or couple days the backup program will just pick up where it left off keeping the data up to date pretty much the same way Apple s Time Machine program works only for PC I appreciate the help and a viable solution Thanks nbsp
the program for backup and its technique to move the data,
sizing how much capacity you need for the storage,
protecting the data from prying eyes (ie encrypting it),
and the product or service for the storage (is it on or off site?)
all users documents, outlook dataClick to expand...
By all user documents to you mean explicitly the My Documents folder or the
entire user profile area \documents & settings\user-login-id\ ?
The User Profile is much bigger and the Application Data folder (eg mine @ ~ 400mb)
and the Local Settings (mine @ ~483mb) are sizable but certainly 'not critical user data'.
The exceptions are Outlook keeps the PST under Local Settings and Oultlook Express is there too.
Some third part stuff (eg Thunderbird email) is found under Application Data.
Personally, I use Allway Sync for replicating my data (but it's not encrypted).
The selectivity of files is excellent any it is fast due to duplicating only changed files.
As I use it in manual mode, I've not tried the scheduling feature which is available.
hi.i am running a games sever,but my client cannot join.my client can join others but not mine.it sees the sever when i update the severs list and ping is 10-20 but just cant seem to connect.
the host pc sees the incoming local connection coming in.
have i got to do somthing with my proxy/lan setting,or is it just not possible to play on my own sever.
my spec is :- ics wired to host to client(no hub)and my ip number is my main cable modem box.
Does anyone have any experience with Microsoft's Thin Client servers and machines? I would like to set up a small network using thin clients but have not heard much about it. Any tips, suggestions, stories, etc.?
I'm trying to paste to an application sitting on a server from a client.
I can copy/paste when I enter the application via the server. but can't paste when I use it as a client. I'm using red hat server.
Wondering what people recommend - have quite a few small businesses with less than 50 users.
Which Anti-Virus do people use? I would like to run the management console on one of the servers. It would be good if the AV was centrally managed.
Key Features (Figure these are probably available on most of these...)
Install through network/GPO
Updates pushed from server
Reporting/Alarms for infections found
I've already used AVG Business Edition and wasn't super happy with the interface. I've also used Trend Micro and have had it let quite a few infections through.
Was looking at the possibility of Symantec Endpoint Protection Small Business Edition but have never use the SBE version. Is there much difference between that and the full?
Did you try Panda EndPoint Protection?
Afternoon Ladies & Gents!
I've spent a few hours on researching this topic. I can't seem to find what I'd need.
Currently I'm looking for a solution. I have about 50 franchised offices. We've played a TV in each of them. Is it possible to put a device in each office and have a "Server" type device to push content over a VPN to them? Also naturally display this on the TVs.
Any comments or points in a direction would be much, much, appreciated.
Perhaps a Slingbox would work for this?
Hey guys I have been pulling my hair out today over this issue OK so i am the domain admin of a school I already have access from the outside to remote into my server at anytime Server from into desktop Remote Client However i have a small issue I would like to be Remote into Client desktop from Server able to remote into one of my clients domain accounts on Remote into Client desktop from Server his machine from time to time when hes having issues I need to remote in directly to his machine So I will lay it out here I logon remotely to my server into the domain I then want to remotely connect to my clients machine and login to his domain account with his credentials I pull up the RDP and put in his IP and credentials etc I get through to his machine with success however when i do i get a message To log on to this remote computer you must be granted the allow log on through Terminal Services right etc etc Now i think where i went wrong is I followed online instructions and gave him rights for terminal services remote access etc but i did this on my server dc I assume my issue is i need to give him these rights directly on his client machine What i mean is do i need to be at his client pc and give these rights while im on his machine for this to eventually work I am stumped and any help is greatly appreciated If more details are needed just ask and i will post more info P S Domain Controller is Server Client PC is Windowshttp://www.sevenforums.com/network-sharing/381977-remote-into-client-desktop-server.html
The current network setup is like this:
Company A has a network setup consisting of Cisco devices only. It has an FTP server where all files are stored and accessed. Company B has a different setup from A (no networking devices, only a wifi modem), and is in need of certain files from A.
According to this Understanding How FTP Works, you can upload and download files after installing a client software and providing an address, username and password. But is this only applicable to clients within Comapany A or is it also applicable for clients of Company B too?
Also, how does an FTP server work with VPN in this situation?
Any help would be very much appreciated, thank you.
First, FTP can always be accomplished without VPN. It depends on the knowledge of the Network Wizards that are at Company A. The Easiest and most simple way is to give the users at Company B the public IP address of the FTP at Company A. That is the easiest, but the least secure. If you are wanting to get vital or sensitive company information, I do not recommend this method. The way I have it running at my company is that we use SFTP or FTP over SSH. FTP is essentially not encrypted or secure, so you first create a secure connection from Company B to Company A, then use FTP to get the file or files that you need. The Network Wizard at Company A will most likely want to use a custom port for connection ( especially if they only have 1 public IP address). I generally use port numbers over 20,000. Port Forwarding makes it so that when the firewall (guessing Cisco ASA since you said its a Cisco house) receives an incoming connection request, it can forward it to the FTP server.
Example: If the FTP server is 192.168.1.100 and is running on port 22 and your public IP address is 22.214.171.124 ( made this number up) and the Network Admin sets the custom port for 22500, then the client at Company B would set their software to connect to 126.96.36.199: 22500. The ASA (or whichever firewall) would redirect that incoming traffic to the FTP server at 192.168.1.100:22. I also recommend still keeping a login/password that way no random ZeroCool would be able to connect and download the files at will. Depending on Company A, they can get pretty strict with the security on who, how, from where, and what time people at Company B can connect to the FTP server at Company A.
Without doing it properly, giving someone VPN access can be a huge security risk. Once someone is tethered up to the network, they could have unrestricted access to machines. All of this wouldn't really set off any alarms either since the user was given VPN access to bypass the firewall. If the people at Company A want a few people at Company B to be able to get the files off the server, its far more secure to punch one small hole in the firewall to let them in to get the files rather than removing that security barrier and give them potential access to the entire Company Network. I am always leary of who gets VPN access at my company.
hi all, im having a problem with a network. on this network, there is a pc running windows 2000 on it. that is the server (pc with printer attached) and then 12 client pcs. now when the server is rebooted, u have to go into "my network places" and log into each of the client pcs before they will connect to the server. (therefore they cannot print). once u have logged into a client pc from the server, u can go to the client pc and print. should u have to do this? (log into each pc before it will print) or should they connect automatically once the server reboots?
hmm... who wants to bet "JohnWill" posts to this one? haha its not like he is new to the pickles that The GT Guy gets hisself into lol!
Hey guys I have been pulling my hair out today over this issue OK so i am the domain admin of a school I already have access from the outside to remote into my server at anytime However i have a small issue I would like to be able to remote into one of my clients domain accounts on his machine from time to time when hes having issues I need to remote in directly to his machine So I will Client Remote into from desktop Server lay it out here I logon remotely to my server into the domain I then want to remotely connect to my clients machine and login to his domain account with his credentials I pull up the RDP and put in his IP and credentials etc I get through to his Remote into Client desktop from Server machine with success however when i do i get a message To log on to this remote computer you must be granted the allow log on through Terminal Services right etc etc Now i think where i went wrong is I followed online instructions and gave him rights for terminal services remote access etc but i did this on my server dc I assume my Remote into Client desktop from Server issue is i need to give him these rights directly on his client machine What i mean is do i need to be at his client pc and give these rights while im on his machine for this to eventually work I am stumped and any help is greatly appreciated If more details are Remote into Client desktop from Server needed just ask and i will post more info P S Domain Controller is Server Client PC is Windowshttp://www.sevenforums.com/general-discussion/381977-remote-into-client-desktop-server.html
I currently have Mapping to 7 Server Client Win 2003 a Win Server of which I was running XP's on for years with no latency issues while logging in I just upgraded the CLIENT PC's to Windows I MAPPED the drives to each CLIENT but after the login name and password are entered the time it takes Win 7 Client Mapping to Server 2003 to MAP the drives is at a minimum of minute Before they mapped in seconds and these CLIENT computers are much faster then what I had in the XP's Any suggestions I have already tried to quot relax quot the security settings on the CLIENT computer Win 7 Client Mapping to Server 2003 but to no avail Should I try SHARED FOLDERS instead but if that's the case I have a NETWORK software that all the CLIENTS use off the server Plus we save ALL work to the server which gets backed up nightly so all the EXCEL files need to be accessed from each CLIENT to the SERVER Again my problem is lying with the Win 7 Client Mapping to Server 2003 LATENCY on logon after I open the programs and the drives are mapped the computers run very fast Ideashttp://www.techsupportforum.com/forums/f217/win-7-client-mapping-to-server-2003-a-1099218.html
To anyone who can assist:
I have a HP media center with MS XP SP2. Each time I login, I get the following message that will always come back after clicking "OK":
Microsoft Visual C++ Runtime Library
Program: ...elDH\Intel Media Server\Media Server\bin\mediaserver.exe
This application has requested the Runtime to terminate it in an unusual way.
Please contact the applications's support team for more information.
I have done the following:
- Delete any and all new programs recently installed
- Purchased and ran RegCure
- Ran Norton
- Research Intel.com for help
- Searched the Web for hours
Any help would be greatly appreciated!
I have also been getting this message not when I sign in but when I run a scan with Superantispyware instead. I posted about it in the Antivirus, Firewall Forum this morning prior to seeing this post. I am using Comodo Forewall Pro v3 latest update and although not sure for certain I believe it is something to do with Comodo.
Out of interest what Firewall are you using?.
I plan to get a mac mini. I would like to have direct access to the machine remotely, just like i did when i connected my laptop pc to my desktop pc via VNC.
My specific question :- is it possible to access the mac via a remote client so that it opens in a window on a Win7 64bit I7 pc?
I ultimately want to control the mac desktop via my win7 pc, mouse and keyboard.
Thanks in advance.
Why wouldn't you just install VNC on your new Mac machine, allowing it to be controlled from the PC?
The product itself is cross-platform.
There are downloads for each host and each client environment.
I'm not a Mac person and only use VNC for Windows hosts and clients. But the product's description certainly shows it as being intended to be cross-platform capable.
--PROBLEM The wireless Server Wireless /w /w Win2003 Error CA Client HELP! IAS, to client Dell notebook system goes to authenticate with windows server and it looks like the authentication is making it to the server because we turned logging on and could see that there was some type of hand shaking and access of the active directory for the user and then the system kicks back the HELP! Error /w Wireless Client to Win2003 Server /w IAS, CA following error The client could not be authenticated because the Extensible Authentication Protocol EAP type can not be processed by the server We assume it means the windows server We have the following configuration Complete Event Log Error Listed at the End of This Message --System Configuration Windows Server Standard Configuration - Base Server w Latest MS Updates - IAS installed - CA Authority with HELP! Error /w Wireless Client to Win2003 Server /w IAS, CA certificates installed - This server is part of a multiple-site domain connected through a cisco style VPN connection - Wireless policy is configured both in Active Directory amp the IAS wireless policy component - There is a wireless group of it given access in the IAS wireless policy we created and the test user has the Dial-In property enabled with Control Access Through Remote Access Policy radio button selected - The Cisco IP is entered as a radius client under IAS service clients tab and the shared secret password setup In the IAS Profile - We have all of the authentication methods unchecked but I think it kicked out the same error whether we had everything checked or not - Everything is checked in the Encryption tab - In the advanced tab we have service of Radius Standard and framed selected - Server settings determine IP assignment but I don t think were even making it that far - No Dial-in constraints selected In the Wireless policy in Active Directory - Networks to access Access point infrastructure only networks only - Preferred Networks the access SSID is listed with network authentication of WPA data encryption TRIP - Under IEEE x tab EAPOL Start message is Transmit per IEEE x EAP type is Protected EAP PEAP under these settings the certificate is correctly selected we believe that was assigned to the server when we created the CA authentication method is EAP-MSCHAP v Cisco Airoport Wireless Access Unit Configuration Radius server is set to be the server w shared secret password setup PAP TKIP are enabled on the wireless access point Dell Notebook Configuration w wireless adapter enabled for WPA Error Log Event Properties of the error are Source IAS Event ID Type Warning NAS IP The Cisco Equipment Client IP NAS PORT Type NAS PORT Proxy-Policy Name Use Windows authentication for all users Authentication Provide Windows Authentication-Server lt undetermined gt Policy-name Gws-wireless this is the policy we created in IAS Server Reason Code Reason The client could not be authenticated because the Extensible Authentication Protocol EAP type can not be processed by the server nbsphttps://forums.techguy.org/threads/help-error-w-wireless-client-to-win2003-server-w-ias-ca.416037/
I have had this problem for awhile and cannot seem to stop it or figure out where it is coming from. It seems that Citrix Presentation Server Client is continually installed on my PC. I can do a complete uninstall and 24 hours later it is reinstalled. I pretty much have a generic install of XP Pro SP2 with only Office 2003. Any clue where this could be coming from?
Hi I am unable to install the Java based client and server CrossFTP programs I tried it through the Windows Add Remove Programs and also through CCleaner In Windows Add Remove Programs I get the following screen But after clicking on quot OK quot nothing happens The instructions on Unable and uninstall CrossFTP to server client the CrossFTP website say quot CrossFTP client and server is installed as Java cache in your system hence you do not need to remove it in most cases since it does no harm to your system If you do want to clear CrossFTP in the cache following the guides Windows Users You should be able to find the uninstall remove program item in the control panel's Add Remove Program list Click to remove the CrossFTP For CrossFTP Server if you checked the quot Start Automatically after System Login quot on server's main frame please uncheck it before your uninstall quot I would appreciate any help in cleaning this program from my system Thanks
Description of the Windows Installer CleanUp Utility
I've installed rAdmin viewer on PC1 and the rAdmin server on PC2.
PC1 (viewer) --------->>>>>> PC2 (server)
By using the viewer on PC1 I log in to PC2 and start applications etc.
Is it possible to start a program via the viewer of PC1 remotely on PC2 that is in fact executed on PC1 ?
Is it possible for someone sitting in front of PC2 to change something on PC1 (kind of reverse connection) while I'm not watching ?
Thanks for your help !
Using rAdmin you are basically setting up a trust between the Viewer and Server
Although the Server can gain full access over the Viewer; the Viewer also is aware of any IP linking to it, and therefore could try to hack into the Servers IP (using another program), and thus cause issues.
Q1. No not without giving permissions (ie file transfer and chat)
Q2. The server has full control (normally) so they could do just about anything
Hi I am using an xp sp machine as the VPN server It connects to the internet via a Netopia wireless router although the machine is connected to the Netopia router via ethernet cable not through a wireless card I have windows firewall turned off I am using a vista sp machine as the to VPN vista unable and client) connect (xp server client It connects to the internet via a Belkin wirless g plus router which is connected to a Speedstream modem This machine also connects to the Belkin router via ethernet cable Windows firewall is on I set up the xp vpn server on the remote machine via logmein I followed this guide http www aeonity com frost howto-windows-xp-vpn-server-setup I set up the vista vpn client using this guide http www aeonity com VPN unable to connect (xp server and vista client) frost howto-windows-xp-vpn-into-remote-location Note I haven t done step of this guide Automating the connection as I have yet to get it to connect There is a least one thing I have discovered that may be messing things up I also may not have set up the routers and modems properly The first problem I see is that when I set up the user account on the xp vpn server VPN unable to connect (xp server and vista client) machine is that in Network Connections gt Incoming Connections gt Properties gt Users gt UserName gt Properties - It shows a digit password This doesn t match as I entered an digit password I then deleted the account set up a new account with no password and lo and behold when you go back into Network Connections gt Incoming Connections gt Properties gt Users gt UserName gt Properties - It still showed the digit password Is that password supposed to be there Why when I VPN unable to connect (xp server and vista client) change it to the digit password does it pop right back up as a digit one Okay now I ll explain the ip addresses I entered into various places during the setup and maybe you can tell me if I did it right In cmd gt ipconfig all it says IP address is But in cmd gt ipconfig all it also says the default gateway is In Incoming Connections gt Properties gt Networking Tab gt TCP IP Protocol gt Properties gt Specify IP address - I entered in the top box and in the bottom box Did I enter the correct string of numbers I then set up the router by going to a browser page and entering and that took me to the netopia router settings I did the port forwarding they call it a pinhole I added a pinhole and gave it a random name it was on tcp in the dropdown box I did the top box as port the second box as port the ip as and the last box as port I then set up two more pinholes in the same fashion except I made the port in each box and set one to TCP and the other as UDP and used the same IP - Okay I then set up the vista vpn client machine I did this through the wizard and the ip address of the remote machine to which is what the xp vpn server machine lists as IP Address Also note the user name I gave access to on the XP vpn server is the same username and password as the vista vpn client One last question although I haven t seen it referenced anywhere do I need to configure the Belkin router or the Speedstream modem that is on the vista vpn client end Thanks in advance for any help Bobby nbsphttps://forums.techguy.org/threads/vpn-unable-to-connect-xp-server-and-vista-client.713888/
I am using a virtual IP to provide access to a mysql cluster However since I don t have machine client IP server mysql virtual same and unlimited hardware I am unable to put the mysql servers mysql virtual IP server and client same machine as the sole application on each system I end up with both an instance of apache and mysql on each system I ve configured the network with LVS and ldirector for load balancing I ve assigned a virtual IP to the system say I make that the primary IP to eth on the load balancer and as a loopback interface on the two machines sql and sql running the mysql servers If I make a request from any server that is not sql or sql everything works fine but when I am making a request from either of those machines it will not send to the load balancer instead mysql virtual IP server and client same machine it picks up mysql virtual IP server and client same machine the loopback and just uses the local server Does anyone have any ideas for how to over come this I m kind of new to VIP s and anything more advanced than a static dynamic ip address I believe my setup is using direct routing Thanks nbsp
Guessing (but nobody else tried)..How about puttin and entry entry in the local host file to redirect?
A software to install on client machine to report to server machine if it's alive?
Preferably using web port.
Is there such a freeware??
currently in use, Teamviewer. but it'snot freeware
If I'm understanding what you're asking, you simply want to know if a machine connected to the server is turned on?
If that's the case, you shouldn't need a program; every server software I've ever worked with maintains a list of connected clients. Even if it doesn't, couldn't this function also be performed by pinging the computers?
Hi can anyone recommand an email client (other than outlook) that will work with exchange server? A client that offers the same functionality of outlook but cheaper/free?
If the company has an Exchange license, the Outlook license is a minimal cost. I'd be surprised if they're even sold separately.
Hi guys,good day to everybody, I'm just wondering if its possible to use windows 7 Ultimate as a Server for thin client? I'll be using nc600 as my client terminal. The box says it supports windows 7. Is there any additional software I need to install on windows 7 server machine before I can use the client terminal? Or are there any guidelines on how this would work?. This is intended to be used for a school project which pertains to "latest innovations" its a group work ^_^. Thanks...
I'm having difficulty getting my PC into a new domain - I've setup a Server 2003 box and can ping the workstation from the server, but cannot ping the other way around, and am unable to join the PC into the domain. A pretty fundamental problem I would say! Maybe I missed something when setting up the server?
I built a small SBS 2003 domain for a customer a few months ago and thought I would take advantage of my Technet sub and build a 2003 network so I can test stuff etc. But I cannot get the damn thing setup! Grrrrrrr!!!!
I am running a weather program (AS2012) on a client for Flight Simulator X (FSX) on the server. The client connects to the server by Simconnect.
Both machines run W7 Home Premium x64 and I run them with full Administrator permissions.
The SimConnect.ini file is located in a folder on the server: C:\Users\FSX_XPlane\My Documents\Flight Simulator X\
This is shared across the network with Full Control for Everyone. The owner is FSX_XPlane.
I can access and open the simconnect.ini file from the client.
When I run the weather program on the client it does not connect to FSX on the server. The system log shows that the path to the simconnect.ini file is not set (attached - time 23:06:44:0096).
The other required simconnect file paths are correctly identified.
If anyone can suggest an explanation for this, and a fix, I'd be grateful.
Okay so far I've setup windows built-in VPN server (using this GUIDE), forwarded ports on my router to port 1723 to my computers local IP and enabled PPTP passthrough. Created 2 rules in windows firewall to allow both TCP 1723 and GRE 47. I've even turned windows firewall off to see if I could connect that way. Still nothing. My phone will say connecting for about a 50 seconds then disconnect. Contacted Motorola and they said that the router will forward GRE with PPTP passthrough enabled, thta its most likely a Windows issue. I'm using a Galaxy S4 and the router is a Motorola SBG6580. I'm totally lost. No errors or anything from android or Windows.
Maybe the following link will help. Any questions let me know.
How to: Windows 7 incoming VPN from Android ? Damian's Blog
I’m not sure if this is the right place to ask, but here is the question.
I’m wondering, if you have a client and server on the same machine (for testing purposes) communicating via tcp/ip using 127.0.0.1 or the LAN ip address of the machine, is it possible to block a port so that they can’t communicate?
I’m asking this because I’m having having difficulties that suggest a port is blocked.
The machine runs WinXP, and is on a wireless network.
Thanks for any feedback.
It is entirely possible to do so. Perhaps disabling the Windows Firewall or examining the pfirewall.log logfile could help you figure out why your port is blocked.
I have two HP Proliant Microservers both running MS Server Standard both also running Symantec Endpoint Protection Small Business Edition One server is staying in my house and that is the Management Server the other server is going to my Gran's old house and that is a Managed Client Now obviously to a internet Management over server a Client the Connecting the two are designed to be on the same LAN and there doesn't seem to be any way of setting the client to look to the management server over the internet so I was looking for a way to forward the specific port that they communicate on over the internet to the server in my house I've been looking into VPN's and it seems that although they can join the two networks together everything internet related also goes through the VPN which is NOT what I'm wanting since that slows things down I want to be able to use the quot remote quot internet connection Connecting a Client to a Management server over the internet for Windows Updates and FTP etc without having to have everything come back to my home network Sure I can forward the internal communications port Connecting a Client to a Management server over the internet to the internet but without some way of directing the traffic over the internet I'm at a loss as to what to do I've had hamachi and Teamviewer mentioned to me but Connecting a Client to a Management server over the internet I'm not really fond of Hamachi since it's quite slow and I'm worried about the potential for hacking since I don't know if it's really secure I've not looked into it as yet and I'm not sure Teamviewer will do what I want since it's mainly designed for remote control of computers rather than port forwarding to a specific internet location I've emailed the people behind OpenVPN to ask if there's a way I can use their software to only forward specific ports over the VPN and they have said that I generally can't do this in a VPN setup unless I'm running Linux in which case I can set up specific port forwarding rules that would bypass the VPN and reach the Management Server on my home network directly Obviously I'm not running Linux so it seems I may be at a dead end unless anyone on here has any bright ideas
Seems that I may have solved my own problem. There is a way you can update the communication settings on the Symantec Endpoint Protection Client via a package that you can create and save to your computer from the Management server or it's Web Interface, within that package is an exe file and two XML files. Upon opening the relevant XML file, it reveals a "Server Address" Field which was the IP of the server on the LAN. Changing that to the hostname I had set up already for my home network then saving the XML and running the update tool on the client has hopefully allowed the Client to communicate with the management over the internet.http://www.sevenforums.com/network-sharing/323152-connecting-client-management-server-over-internet.html
This was tricky to summarize in the title so - I have a Win pc running as an ftp server and NAS on my network plugged into one of the LAN ports of my router Normally this is in hibernation client Server won't accessed once to back sleep go 10 by Win mode and I use WOL from clients to wake and acccess the shares etc After a few minutes of inactivity the pc goes back into hibernation as per the power profile settings This was initially set up on an all Win network and has always worked as expected I now have a Win device which after a long slog works with this setup with the exception that once the remote Server won't go back to sleep once accessed by Win 10 client server is woken from Server won't go back to sleep once accessed by Win 10 client this device it never goes back into hibernation even after shutting down the Win PC I have Server won't go back to sleep once accessed by Win 10 client to manually force it at the server from whence it behaves normally until the next Win client access The hibernation works normally when the clients are win I realise it may be a Win issue but any insights regarding what Win might do differently would be appreciatedhttp://www.tenforums.com/network-sharing/61696-server-wont-go-back-sleep-once-accessed-win-10-client.html
I would like to ask the community of these Forums for help to set my Desktop computer running on Windows Home Premium bit to access chat programs that I have dowloaded from the Web and have installed on my PC My browser is Firefox but i am unsure if to a set to from Proxy client/server a chat access How the browser How to set a Proxy to access from a chat client/server is involved in this Anyways I do get in my e-mail a fresh daily list of free proxies to use to connect to the web so given that I first have to open the program from icons that i already have on my Desktop does anyone know how to set things so when I open them they would show -to anyone who wants to monitor chat users and server owners on the other How to set a Proxy to access from a chat client/server end - the How to set a Proxy to access from a chat client/server IP geographic location and or name of Internet Service Provider of the Proxy address itself and not MY OWN IP location and ISP as it happens now without the use of a proxy Should anyone would like to take a peek at those chat places before responding they are A Halsoft Chat www vpchat com B Yak Chat www yackity-yak com Install Instruction to exemplify how they exist on my PC now Download to desktop Then go to desktop and Install the client The Client will install to its on folder Will not in any way hurt any other client u may have C Voodoo Chat www voodoochat com My need for privacy is based on peace of mind and has no intention of masking any illegal activity It has an honest purpose I would now appreciate to receive responses from knowledgeable person s and or those who may have succeeded in making the computer work the way i would like it to access these places I have already tried setting Firefox to access via a proxy but that by itself did not work so I concluded that there must be more than just the browser to be set I hope that now someone can come up with a 'Yes Way Jose' this is how to do it Thank you kindly Cordially Jose Cariocahttp://www.techsupportforum.com/forums/f131/how-to-set-a-proxy-to-access-from-a-chat-client-server-514615.html
brand new x out off the server keyboard input client log at freezes off HP box today win pro fitted nbsp desktops when connect to server keyboard input at HP server log off freezes client r all ok but when a user logs off pressing the dedicated volume up or down or mute buttons on supplied keyboard keyboard input at HP server log off freezes client will lock freeze the client no other keyboard input works only cure is to unplug and restart and start windows normally these are in a school and it wont take nbsp nbsp kids long to sus this out and lock them up have taken a unit nbsp out of the box unit added to the domain entered safe boot with networking and in keyboard input at HP server log off freezes client this mode the problem is solved so it must new PC related issuenote any usb style keyboard fitted including the keyboard supplied from HP nbsp or nbsp logitech msoft etc nbsp with these deicated keys will give the same faulthelp please cannot deploy to students till a fix is available many thanks in anticipation of your kind cooperation and replies nbsp nbsphttp://h30434.www3.hp.com/t5/Desktop-Boot-and-Lockup/keyboard-input-at-HP-server-log-off-freezes-client/td-p/5802053
Hi all I am the administrator of a small Windows Small Business Server network which comprises Server NIC 2003 SBS Connection Server/Client Error - Win and Clients One of the client computers failed and I had to run a diagnostic on the components which meant testing each i e M b Video CPU Hd etc It transpired that on this Client the PSU was the problem so I installed a new PSU rebuilt the Client and connected it to the network and restarted it Everything started OK except I could not connect to the network I tried to Join a domain via My Computer Properties Computer Name Win SBS 2003 - Server/Client Connection Error and Change and putting in the Domain name of the server I receiver the Error message - An error occurred when DNS was queried for the service location SRV resource record used to locate a domain controller for domain ABCD CO UK The error was quot The requested address is not valid in its context quot error code x WSAEADDRNOTAVAIL The query was for the SRV record for ldap tcp dc msdcs ABCD CO UK So there you are the full Error message I have so far been unable to get the Client computer to connect to the Win SBS Server but there is one thing that may be relevant I did attach the HD to another Client pc to confirm it was OK so could this have reset something on the HD which has stopped it connecting to the Server Any help on this would be gratefully accepted Regards Gerryw p s Hope this is not to long winded nbsp
The computer is not in the domain at the moment?
The first thing to check with everything related to Active Directory: is the DNS set up correctly? Make sure that the computer in question has the SBS machine as its DNS server.