Windows Support Forum

System And Applications Failures (unable To Initialize) In The Event Viewer - Services Will Not Start

Q: System And Applications Failures (unable To Initialize) In The Event Viewer - Services Will Not Start

Hello there Just to let you know the context I have recovered from a severe malware Trojan Vundo infestation with the kind help of SifuMike from this very forum Before I decided to turn myself towards a helping hand I had to tackle with the infestation myself and namely had to dapple with into services msc and msconfig to disable some programs that would load at startup This in order to try to prevent further spread of the Failures (unable Viewer System Event Services Applications Will In And Not - Initialize) The Start To infestation Though the infestation is gone my PC running under Windows XP Professional SP still has some malfunctions - one of the most troubling facts is that if I put on the password protected screensaver when it resumes to fast switching user welcome page the password I type in to log in does not work Note that I run an administrator account I need to shut down and System And Applications Failures (unable To Initialize) In The Event Viewer - Services Will Not Start restart the computer to be able to log in - When I try to install uninstall software I have to start manually the Windows Installer Service and nonetheless receive he following error message quot the RPC server is unavailable quot although the Remote Procedure Call RPC service is started - in the System section of the Event Viewer I can see numerous errors pointing to services that fail to start e g and to name a few Remote Access Connection Manager Application Layer Gateway Service Workstation service Computer browser service Routing and Remote Access SSDPSRV service SSDP Discovery Service etc - ditto in the Application section of the Event Viewer e g MS-DTC Service DCOM service Windows search service etc I read that most services rely on others to start i e the first being prerequisites for the latter to start However I cannot see because those areas are greyed out dependencies in the dependencies tab I would like to ensure that I have all the necessary and useful services running on my PC I see that some services such as MS-DTC for instance are not able to log on their log in is password protected but do not know what to do about it In this respect I recall that I deleted a NT Authority System account while my PC was infected due to the weird name I suspected it was in relation to the infestation hard luck I should be most grateful if someone could give me a helping hand in relation to the above Do not hesitate to request from me any log or list of running services or errors in the System and Applications sections of the Event Viewer Thank you very much for your kind assistance Looking forward to reading from you Regards Captain Killgore

Relevancy 100%
Preferred Solution: System And Applications Failures (unable To Initialize) In The Event Viewer - Services Will Not Start

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: System And Applications Failures (unable To Initialize) In The Event Viewer - Services Will Not Start

Hello,It sounds like that the system has been through a lot. Download advanced windows care, the free version http://www.iobit.com/advancedwindowscareper.html this should solve quite a few of the problems and provide a solid foundation to diagnose further problems.In services.msc you mention that the dependencies list are greyed out, how long have you left the list to populate? the list takes anything from a few seconds to a minute to usually load. open the dependencies tab of installer and leave it for a while.Let us know how it goes.

http://www.bleepingcomputer.com/forums/t/127526/system-and-applications-failures-unable-to-initialize-in-the-event-viewer-services-will-not-start/
Relevancy 99.33%

Hi all,

i tried loading the eventvwr.msc file from system32 folder directly as well as from the administrator tools, but i get:

"event log service is unavailable. verify that the service is running."

so i try to start the event log service, from the services.msc program;
whenever i try to start windows event log from services i get the message:

"Windows could not start the windows event log service on local computer.
Error 3: The system cannot find the path specified."

how can i specify the path?
or
how can i resolve the problem?

any help would be appreciated please---thanks

A:HELP need to solve this problem asap - Unable to start event viewer/event log service

Fire up regedit and find this key:

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Eventlog

With "Eventlog" highlighted on the left pane, you should be able to see a value called "ImagePath" on the right. ImagePath should be equal to this:

%SystemRoot%\System32\svchost.exe -k LocalServiceNetworkRestricted

If you can't see "ImagePath" in that location, or if it's not set to the text above, that's almost certainly your problem. If you're in the habit of using "registry cleaners", that might be the cause.

http://www.vistax64.com/software/223413-help-need-solve-problem-asap-unable-start-event-viewer-event-log-service.html
Relevancy 98.9%

Hi all,

i tried loading the eventvwr.msc file from system32 folder directly as well as from the administrator tools, but i get:

"event log service is unavailable. verify that the service is running."

so i try to start the event log service, from the services.msc program;
whenever i try to start windows event log from services i get the message:

"Windows could not start the windows event log service on local computer.
Error 3: The system cannot find the path specified."

how can i specify the path?
or
how can i resolve the problem?

any help would be appreciated please---thanks

A:Unable to start event viewer/event log service on vista

By the way the OS is a Vista Home Prem without SP1. and i have searched this problem extensively, finding no solutions.

If anyone has any advice it would be greatly appreciated.

http://www.techsupportforum.com/forums/f217/unable-to-start-event-viewer-event-log-service-on-vista-367739.html
Relevancy 98.04%

Hi, *trying* to fix my dad's laptop. He's been receiving BSODs the past couple of days, but I haven't been able to get the crash code, I'll try to add it later. I've attached the .zip with the crashlogs/system data.

Before the BSOD, he gets some errors in the event viewer, where:

The [EXAMPLE] service failed to start due to the following error:
The service did not respond to the start or control request in a timely fashion.

He gets about 10 errors over about 10, maybe 15 minutes.
The BSODs started on the 11/08/16. No new hardware has been installed, nor software.

Specs:
Dell Inspiron 5547
Intel Core i7 4510U
Windows 10 Home
8GB RAM
AMD Radeon R7 M265
Intel HD Graphics

Help appreciated! :)
DELL-INSPIRON-16_08_2016_103324_38.zip

http://www.tenforums.com/bsod-crashes-debugging/60417-many-services-event-viewer-failing-start-before-bsod.html
Relevancy 90.3%

I was viewing the security logs in event viewer today exciting Event viewer audit failures security I know when I noticed some audit failures I like things running smoothly so this irked me Event viewer security audit failures a little I have a number relating to Event viewer security audit failures tcp ip Code integrity determined that the image hash of a file is not valid The file could be corrupt due to unauthorized modification or the invalid hash could indicate a potential disk Event viewer security audit failures device error File Name Device HarddiskVolume Windows System drivers aswSP sys Code integrity determined that the image hash of a file is not valid The file could be corrupt due to unauthorized modification or the invalid hash could indicate a potential disk device error File Name Device HarddiskVolume Windows System drivers tcpip sys Windows Firewall was unable to notify the user that it blocked an application from accepting incoming connections on the network Error Code I no longer use windows firewall as I now use nod smart security but the tcp ip error concerns me

A:Event viewer security audit failures

Code integrity determined that the image hash of a file is not valid. The file could be corrupt due to unauthorized modification or the invalid hash could indicate a potential disk device error.

File Name: \Device\HarddiskVolume1\Windows\System32\drivers\aswSP.sys



+





I now use nod32 smart security



But first error message concern Avast.Make sure you uninstalled Avast exactly - I think isn't.Does exist avast folder on your computer?-If exist remove it

http://www.vistax64.com/software/187471-event-viewer-security-audit-failures.html
Relevancy 84.28%

Log Name: Application
I was wondering If anyone tell me what this msg means exactly.

Source: Microsoft-Windows-WMI
Date: 10/20/2012 11:48:17 PM
Event ID: 10
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: JohnsRig-PC
Description:
Event filter with query "SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA "Win32_Processor" AND TargetInstance.LoadPercentage > 99" could not be reactivated in namespace "//./root/CIMV2" because of error 0x80041003. Events cannot be delivered through this filter until the problem is corrected.

A:Unusuall msg in event viewer under applications

Welcome to Seven Forums BoneMaN41. Do you have SP1 installed? If so, try this fixit:

Event ID 10 is logged in the Application log after you install Service Pack 1 for Windows 7 or Windows Server 2008 R2

A Guy

http://www.sevenforums.com/performance-maintenance/259678-unusuall-msg-event-viewer-under-applications.html
Relevancy 83.42%

I have another error message that I don;t know what it is:

Under Event Viewer > Applications

Thanks in advance
Luanne
 

Relevancy 83.42%

I'm not sure if this is a problem or not.

Whenever I got into the event viewer (which is very rarely), I get a box telling me that my applications area is corrupt. Here is how it goes:

I go into event viewer and hit 'applications'.

Applications window opens up and there is a bunch of stuff listed.

I touch the scroll bar on the right side of the apps window and this other box will pop up saying: 'the event log file is corrupt'.

So then you have to click 'okay' and then everything that was in the applications area disappears and the vacant area will say 'there are no items to show in this view'.

Then in the little list along the left hand side (the event folders list?), there will be a red 'x' on applications.

Is this something that I need to worry about?

I am using XP.

Thank you in advance.

A:Event Viewer File Corrupt In Xp? Applications

Try right-clicking on Application on the left and select "Clear all Events"

http://www.bleepingcomputer.com/forums/t/158156/event-viewer-file-corrupt-in-xp-applications/
Relevancy 83.42%

There are errors in a lot of the system's events. For example, I checked under the event viewer and there were error symbols on atapi, DCOM, cdrom, and setup. Also all of the applications were missing. May someone with some experience or knowledge to this problem please give me some advice.

Thanks ,

Nina

A:Event Viewer - lot's of errors and missing applications

for starters, enter your device manager and look for any yellow conflict symbols

then enter you bios and check that the hard drive is your primary master

after that post back for further instructions

http://www.techsupportforum.com/forums/f10/event-viewer-lots-of-errors-and-missing-applications-86010.html
Relevancy 82.56%

There are errors in a lot of the system's events. For example, I checked under the event viewer and there were error symbols on atapi, DCOM, cdrom, and setup. Also all of the applications were missing. I have no idea on what to do, it's crazy. Please may anyone with any experience help me out.

Thanks,

Nina
 

Relevancy 82.13%

I'm having a problem after I installed PHOTOSHOP CS4 EXTENDED it asked me to update my video driver ( ATI RADEON X1300 ) which I did. after that not of my programs will launch when I tried to open up eventvwr it was blank. I tried to go to services.msc to see if the service is running under Windows Event Log it wasn't started was before the driver update . I right click on the Windows Event Log click on properties try to start the service and I get this error message error " 4201 the instance name passed was not recognized as valid by a wmi provider " . Need help to get this fixed . Thank YOu .

A:Need help to fix my event viewer startup in services.msc

Use system restore and go back to a date prior to to CS4 Extended install.

http://www.vistax64.com/general-discussion/250555-need-help-fix-my-event-viewer-startup-services-msc.html
Relevancy 79.55%

I ve made sure the service is started and automatic This all started when I had a problem with the partition directly after my Vista one and had to format it It wasn t however a system volume but rather just a backup volume Can t find any info that helps find a solution Log Name Application Source Microsoft-Windows-CAPI Date PM Event ID Task Category None Level Error Keywords Classic User N A Computer R D Description The Cryptographic Services service failed to initialize the Catalog Database The error was x Crypto Viewer every 5-10 appearing Event Red Error in Services mins Access is denied Event Xml lt Event xmlns quot http schemas microsoft com win events event quot gt lt System gt lt Provider Name quot Microsoft-Windows-CAPI quot Guid quot bbca a -b - dc-a c -b d e fb quot EventSourceName quot Microsoft-Windows-CAPI quot gt lt EventID Qualifiers quot quot gt lt EventID gt lt Version gt lt Version gt lt Level gt lt Level gt Red Crypto Services Error appearing every 5-10 mins in Event Viewer lt Task gt lt Task gt lt Opcode gt lt Opcode gt lt Keywords gt x lt Keywords gt lt TimeCreated SystemTime quot - - T Z quot gt lt EventRecordID gt lt EventRecordID gt lt Correlation gt lt Execution ProcessID quot quot ThreadID quot quot gt lt Channel gt Application lt Channel gt lt Computer gt R D lt Computer gt lt Security gt lt System gt lt EventData gt lt Data gt x lt Data gt lt Data gt Access is denied lt Data gt lt EventData gt lt Event gt nbsp

A:Red Crypto Services Error appearing every 5-10 mins in Event Viewer

Forget it, I've decided to format/reinstall.
 

https://forums.techguy.org/threads/red-crypto-services-error-appearing-every-5-10-mins-in-event-viewer.590692/
Relevancy 79.55%

System event not recording anything. It is empty, says "date is invalid(13)".

I have some flaky things going on like unexplained CPU spikes causing slowdowns and mouse drag. Also have video problems screen going blank then recovery.

I have reloaded video drivers to no avail. No system lockups or BSODs. I need to see system event log to debug. Other event logs OK. I am proficient on PC and have searched for event log problem. The Event Log service is running. Thanks.

hp pavilion dv9000
OS Name Microsoft® Windows Vista™ Home Premium
Version 6.0.6001 Service Pack 1 Build 6001
Processor Intel(R) Core(TM)2 Duo CPU T7100 @ 1.80GHz, 1801 Mhz, 2 Core(s), 2 Logical Processor(s)
BIOS Version/Date Hewlett-Packard F.23, 10/3/2007
SMBIOS Version 2.4
Installed Physical Memory (RAM) 2.00 GB
Adapter Type GeForce 8400M GS, NVIDIA compatible
Adapter Description NVIDIA GeForce 8400M GS
Adapter RAM 128.00 MB (134,217,728 bytes)
 

A:Solved: Vista, Event Viewer - system event log not recording

Did you check the - %SystemRoot%\System32\Winevt\Logs\System.evtx file? It may be corrupted and you may want to rename it to .old and let it recreate itself.
 

https://forums.techguy.org/threads/solved-vista-event-viewer-system-event-log-not-recording.793436/
Relevancy 76.11%

Hello I ve been trying to help my friend fix his laptop It s a Dell Inspiron with Vista Home Basic It started off with the CPU constantly running at even when idle We 100% Unable view to Event at Viewer/CPU ran some spyware antivirus scans ie norton security scan malwarebytes etc which found lots of problems but it still locks up constantly I am unable to open the Event viewer when i try it just doesn t open if i go into the task manager it shows mmc exe under the processes tab but there is no window open I will also get a message after a few minutes saying mmc exe has stopped responding I also get a message at start-up saying quot Failed to connect to a windows service Windows could not connect to the System Event Notification Service service This problem prevents limited users from logging on to the system As an administrator user you can review the System Event Log for details about why the service didn t respond quot but of course I can t Any help on the matter would be very appreciated nbsp

Relevancy 73.96%

Hi
I hope that I have put this in the correct forum ????, never had this before, each time after start up or restart when I open event viewer I get the message "add snap on console" then event viewer opens.

Is there a problem or can I do something so that event viewer open without message.

Win7/32 bit Toshiba laptop

Thanks in advance

Tony Miller

A:MMC message at start of event viewer

I fixed by reboot of computer

http://www.sevenforums.com/performance-maintenance/189059-mmc-message-start-event-viewer.html
Relevancy 73.53%

Earlier this week I had scanned this computer Dell dt with Malwarebytes amp Avira free found nothing To be honest after that I really can't remember what the computer was doing but it wasn't acting normal Please forgive me I am working on several faulty pc's at the moment After those two scans a day two later I scanned Unable install LoadPerf.dll - to Viewer in Event programs/Errors with other LoadPerf.dll - Unable to install programs/Errors in Event Viewer Malware Tools TDSSKiller and Chameleon and one of those found something and I immediately deleted it Whatever it was destablized the system enough that I ended up doing a system restore to the day before I ran those two so I am back where I started I did the latest updates from MS and I wanted to check the drivers on this pc with a tool on the Dell website I have it downloaded saved to dtop but when I click to execute I get 'Cannot Start the App Contact the vendor' I went to Event Viewer Application and there are several ERROR LoadPerf EVENT the performance counter name string in the registry is incorrectly formatted The bogus string is bosus index value is the st DWORD in Data Section while the last valid index values are the second amp third DWORD in the Data Section ERROR LoadPerf EVENT unloading the performance counter strings for service WmiApRpl failed The error code is the st LoadPerf.dll - Unable to install programs/Errors in Event Viewer DWORD in data section ERROR NET runtime error reading EVENT event type clr r P addinutil exe Several WARNING MSiInstaller EVENT WARNING Userenv EVENT Performace Logs Alerts THERE ARE NO ITEMS TO SHOW IN THIS VIEW Thanks and I appreciate LoadPerf.dll - Unable to install programs/Errors in Event Viewer any help I did go to the files here on the forum and saw where there was a download for LoadPerf dll I am just not advanced enough to mess with the registry I was hoping to get some guidance

A:LoadPerf.dll - Unable to install programs/Errors in Event Viewer

Sorry I wanted to attached the error I get with the Dell tool.

http://www.bleepingcomputer.com/forums/t/514298/loadperfdll-unable-to-install-programserrors-in-event-viewer/
Relevancy 73.53%

Hi I recently made some upgrades 11" hangs, "atapi Event ID Event in Viewer Frequent system to a previously fine PC - they were - Installing GB extra RAM of the same variety - Reinstalling windows on a new SSD a Samsung SSD EVO GB I previously also upgraded to Windows but a bunch of blue screens and Frequent system hangs, "atapi Event ID 11" in Event Viewer other issues later I reinstalled I'm still having problems though - the current symptoms are that every so often - times a day the computer will hang for - minutes on the 'starting windows' screen When it finally loads it will often hang for further extended periods before settling down I checked in these event log and during these periods there will be many 'atapi' errors with Event ID quot The driver detected a controller error on Device Ide IdePort quot I have attached a screenshot There will sometimes be other errors usually relating to the timeout of certain things but the previously mentioned error is by far the most prolific On rare occasions there have been more serious errors - never blue screens since going back to windows but once I booted to a black screen with just a mouse was able to shut down via task manager then following a restart seemed ok Through some investigation it does seem to be that the root cause of the problem is the SSD I identified this a while ago and have tried various fixes including Ensuring my Motherboard a M A LT-M SATA ports are configured in AHCI mode they were previously IDE This also led me to completely re-installing windows in an effort to make sure the correct drivers were installed though more on those drivers in a second Updating my motherboard's BIOS Running MemTest to check my RAM wasn't causing the problem Changing the SATA cable and port of my SSD Updating various drivers from ASUSTeK Computer Inc -Support- Drivers and Download M A LT-M for my motherboard including the chipset I saw another driver for quot AMD AHCI Compatible RAID Controller Driver V quot but when I try and updating this windows just says that the most up to date driver is already installed I've also tried running various checks for disk errors including the Windows built-in drive checker and HD tune pro I just tried unplugging my DVD drive as well which is the only other thing connected to the SATA ports On a side note I do not have the Gb s SATA ports only Gb s SATA though I don't see why this should be a problem I've of course looked online and have found many people with similar issues but often they seem unresolved or their fixes unfortunately don't work for me Any help would be massively appreciated as this has been plaguing me for weeks

http://www.sevenforums.com/drivers/380152-frequent-system-hangs-atapi-event-id-11-event-viewer.html
Relevancy 73.1%

Trying to download limewire which use to work just fine - but now it gives me this error message and I don't know where to start(limewire was unable to intialize and start. this is usually due to a firewall program blocking limewire's access to the internet or loopback connections on the local machine. Pleas allow limewire access toe the internet and restart limewire???? don't know what this means can anyone help?
 

A:unable to initialize start

Read the Rules:

http://www.techguy.org/rules.html

P2P is illegal.
 

https://forums.techguy.org/threads/unable-to-initialize-start.410297/
Relevancy 72.24%

I installed a free event viewer app and noticed that I sometimes get this error which is pointing to the search service - it IS disabled and thats why it probably fails but what I cant work out is why its even trying to launch the service I went to uninstall Windows Desktop Search and it said that it may have already been uninstalled and removed it from add amp it? use Wsearch I start Viewer, not Event in dont error can remove programs I use XP SP -Bit I think its happening when I boot the computer ive checked services and startup using Autoruns amp HJT and theres nothing to say that Windows Search or anything using it is running at boot ive ran MalwareBytes and SAS and gotten clean results if anyone could help with this it would Wsearch can not start error in Event Viewer, I dont use it? be great - its not causing any problems im just curious Wsearch can not start error in Event Viewer, I dont use it? as to whats causing it too run thanks Type Error Date Time Event Source DCOM Category None User MOTHER Paul Computer MOTHER Description DCOM got error quot quot attempting to start the service WSearch with arguments quot quot in order to run the server D C F-AC - F F-BEB - C C CE nbsp

https://forums.techguy.org/threads/wsearch-can-not-start-error-in-event-viewer-i-dont-use-it.1070365/
Relevancy 72.24%

Does any1 know how to fix the red x ? Like repair the problem ? I don't want to have the X on the system even log, I clicked the link on how to solve the problem but didn't help much as i expected. So i will be very glad for you guys to help me out ;) http://imagenerd.com/uploads/beeldinghelpt1Bb.jpg- ThanksEddy

A:System Event Viewer Log Errors

That is coming from a symantec program on your computer. If you have a norton product on there, a service that the program installs is failing. Uninstall and Reinstall any norton software on your PC. This should fix your issue.

http://www.bleepingcomputer.com/forums/t/81356/system-event-viewer-log-errors/
Relevancy 72.24%

I have windows xp home edition.
Event Type: Warning
Event Source: Dhcp
Event Category: None
Event ID: 1003
Date: 8/31/2008
Time: 9:24:18 AM
User: N/A
Computer:
Description:
Your computer was not able to renew its address from the network (from the DHCP Server) for the Network Card with network address 001731BFC383. The following error occurred:
The operation was canceled by the user. . Your computer will continue to try and obtain an address on its own from the network address (DHCP) server.
Event Type: Error
Event Source: Dhcp
Event Category: None
Event ID: 1002
Date: 8/31/2008
Time: 9:24:30 AM
User: N/A
Computer:
Description:
The IP address lease 192.168.1.33 for the Network Card with network address 001731BFC383 has been denied by the DHCP server 192.168.1.1 (The DHCP Server sent a DHCPNACK message).

AJRoad

A:Event Viewer - System Error

Hi AJ,It could be a few different things. Check this article for more info: http://www.eventid.net/display.asp?eventid...HCP&phase=1

http://www.bleepingcomputer.com/forums/t/166585/event-viewer-system-error/
Relevancy 72.24%

Hi all.

I was reading another post in the hardware section of this site, and that led me to be interested in the contents of the System log of my computer's Event Viewer. Anyway, I was about halfway through the log, when a message popped up saying the system log was corrupted, and blanked the log of all it's contents.

It's not a big problem, but what would cause that to happen?

Thank you in advance.
 

https://forums.techguy.org/threads/event-viewer-system-log-corruption.464403/
Relevancy 72.24%

Good Day A few days ago when coming onto the desktop I would not be able to use RUN or get into the Control Panel This does not happen all of the time and to temporary fix the problem one or more reboots are needed I checked in the Event Viewer and seen the error I right-clicked and went to its properties It states quot The SAVRTPEL service failed to start due Viewer/System How error>XP/Event fix to to the following error The system cannot find the file specified quot I clicked on How to fix error>XP/Event Viewer/System the for more information link and below is what it has to say How to correct this situation as clearly as you can state Thanks Much COPY Details Product Windows Operating System Event ID Source Service Control Manager Version Symbolic Name EVENT SERVICE START FAILED Message The service failed to start due to the following error Explanation Service Control Manager SCM could not start the specified service probably because How to fix error>XP/Event Viewer/System the How to fix error>XP/Event Viewer/System service is not configured correctly User Action Do one or all of the following Review the error information displayed in the message Verify that the service password has not expired Verify that the service is in the correct location Verify that the service is not infected with a virus To display the WIN EXIT CODE error that SCM encountered when trying to start the program at the command prompt type sc query service name The information displayed can help you troubleshoot possible causes for the error If the WIN EXIT CODE is zero then SCM did not attempt to start the service because the error was detected first Version Symbolic Name EVENT SERVICE START FAILED Message The service failed to start due to the following error Explanation Service Control Manager SCM could not start the specified service probably because the service is not configured correctly User Action Do one or all of the following Review the error information displayed in the message Verify that the service password has not expired Verify that the service is in the correct location Verify that the service is not infected with a virus To display the WIN EXIT CODE error that SCM encountered when trying to start the program at the command prompt type sc query service name The information displayed can help you troubleshoot possible causes for the error If the WIN EXIT CODE is zero then SCM did not attempt to start the service because the error was detected first -------------------------------------------------------------------------------- Related Knowledge Base articles You can find additional information on this topic in the following Microsoft Knowledge Base articles quot Event ID quot or quot Event ID quot Error Message When You Attempt to Start a Service Describes a problem with logon failures when you try to start a service Provides several resolutions quot Event ID quot Error Message When ASCTRM Service Does Not Start On a computer that is running Windows NT Windows or Windows XP when you install or remove RealNetworks RealPlayer or when you install or remove a program that installs RealPlayer for example Netscape Navigator the following Availability and description of the Port Reporter tool Describes the Port Reporter tool that you can use to log TCP and UDP port activity on computers that are running Windows Server Windows XP and Windows Contains information about how to obtain install and configure the tool You cannot log on or you experience a long delay on a domain controller or on a member computer that is running Windows Windows XP or Windows Server Describes a problem that may occur if one or more services that run in the Lsass exe process or in the Services exe process are no longer configured to run as shared service processes Lists the symptoms of this problem Your Windows XP computer stops responding after you log on Provides a resolution for an issue that occurs when you log on to a computer that is running Windows XP... Read more

A:How to fix error>XP/Event Viewer/System

Howdy Firedog 1 !

Windows XP
Right-click the "Start" button, and then click "Properties".

On the "Start Menu" tab, click "Classic Start menu", and then click "Customize". This changes the style of the Start menu.

Click "Remove".

Open the "Programs" folder and then open the "Startup" folder.

Highlight the items in the "Startup" folder that you want to remove and click the "Remove" button.

Click the "Close" button.

Click the "OK" button twice.
 

https://forums.techguy.org/threads/how-to-fix-error-xp-event-viewer-system.482174/
Relevancy 72.24%

I m exploring learning about the Event Viewer this week I m running WinXP Home SP v Some entries make sense some do not I noticed I m getting a lot of NET Runtime Errors The error screen looks like this http img imageshack us my php image s nhunter xz jpgDon t know what it means FWIW I did a Run Search on NET Framework and see that I have the following three folders in C WINDOWS net Framework Version Version and Version The first two versions quot properties quot have a Viewer System Event (errors) - creation date that would indicate they were pre-installed by Dell I assume Version was part of a MS Security Update done since I bought the PC Are all three supposed to be there Or could this be a factor in my Event Viewer showing these errors What action s if any would you folks recommend regarding these system errors I m not experiencing any odd pc behavior other than some script errors on websites but able to surf OK

A:Event Viewer - System (errors)

Well, I will try to help as much as I can but you have to realize that the only experts on .NET work for the big place in Washington Not DC.The first thing I would do is get a copy of the, .NET software and reinstall. Or go to the web site and you can try this one.http://msdn.microsoft.com/netframework/It has a lot of info and might start you in the right direction and it has some links on the right side that might be useful.Good luck

http://www.bleepingcomputer.com/forums/t/50479/event-viewer-system-errors/
Relevancy 71.38%

Hello,

 

I have several Win 7 machines that all have this same issue.


 

When you try to view the Event Log I get an error saying the service is not running.

 

The service is set to Automatic. When you try to start it you get the error below.

 

Windows could not start the Windows Event Log service on Local Computer.

Error 0x80007000e: Not enough storage is available to complete this operation.

 

I have tried everything I can to fix this and am now out of ideas. Not all Win 7 machines have this issue, but most in our network do.

 

Any thoughts.

A:Event Viewer will not start - Service not running - Not enough storage space

Hi,
 
According to the error message, there’s no enough storage on your drive.

 
How much feel space in your C drive? The default event log should be located in C:\Windows\System32\winevt\logs
 
Please replace these logs to other drive and restart the service to see if the same issue occurs.
 
Since the issue occur with many machines, the problem may related with the installation image. Did the image make by yourself? How did you deploy these Windows 7
PC? And did the issue appear in a new installed Windows 7 PC?
 
Furthermore, does your workaround is a domain? Please check if any GPOs were set to those PC.
 
Hope that helps.

 
 
Regards,
Leo  
Huang
 
 Please remember to click ?Mark as Answer? on the post that helps you, and to click ?Unmark as Answer? if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

https://social.technet.microsoft.com/Forums/en-US/bb11e534-2990-48a3-9396-e34e44ed6d9c/event-viewer-will-not-start-service-not-running-not-enough-storage-space?forum=w7itproperf
Relevancy 71.38%

My goal is to start Windows Event Viewer from a command line, with the Application node already selected, showing only entries for my specific application, or provider? In other words, I need to filter it by the Source column for the "Application X" using command line call:



So far I could figure out that I need to do this to show Application node:


Code:
eventvwr /c:Application
but I can't figure out how to specify provider in the /f: parameter, and the example given if I run "eventvwr /?" does not help much.

Any idea how to do it?

http://www.sevenforums.com/general-discussion/393073-how-start-windows-event-viewer-specific-application-provider.html
Relevancy 71.38%

I'm having some issues with my computer and I'm not sure what caused it. I trying to open WordPad and I got a Microsoft Visual C++ runtime error that this application has requested the Runtime to terminate it in an unusual way. So I try to check the error in Event Viewer and I get the same error. I tried to go into Services, Computer Management, Device Manager, and I get the same error. There's no error codes or anything else that appears to pinpoint the error. No problems when in Safe Mode. Any ideas on how I can get this fixed without having to reinstall Windows 7? I have Windows 7 64-bit home edition.

A:Microsoft Visual C++ runtime error when trying to start Event Viewer

Welcome to our forum ledgema.

The first thing I would try is sfc /scannow to check Windows 7 system files.
Here is a tutorial by Brink to guide you.
Please post the results.

SFC /SCANNOW Command - System File Checker

http://www.sevenforums.com/general-discussion/345937-microsoft-visual-c-runtime-error-when-trying-start-event-viewer.html
Relevancy 71.38%

Just after a system recovery on both C/ and D/ drives, the following screen is displayed in Windows Event Viewer
Application Error Records 64KB
Security Audit Records 64KB
System Error Records 64KB.
Is this normal?
 

https://forums.techguy.org/threads/windows-event-viewer-after-system-recovery.306316/
Relevancy 71.38%

I looked at the event viewer and realized that there were application error records and system error records. All the application files were missing--all of them and there were several errors in the system files. I don't know what to do now. pLEASE HELP ME.

A:Application & System Errors In Event Viewer

try running the system file checker..heres the instructions


Run the System File Checker = put in your windows disk

Go to the Run box on the Start Menu and type in:

sfc /scannow ( sfc if not recognized ) [ space between c and / ]

This command will immediately initiate the Windows File Protection service to scan all protected files and verify their integrity, replacing any files with which it finds a problem. You will need your Windows cd.

i would imagine you need to run a virus check, maybe ewido, and be careful with programs such as cleanup or beclean

post back

http://www.techsupportforum.com/forums/f10/application-and-system-errors-in-event-viewer-85660.html
Relevancy 71.38%

When I shutdown or restart I find the following system error in Event Viewer Source Service Control Manager Error Event ID Description The following boot-start or system-start driver s failed to load Kl This has been happening for a long time I think I have not worried System Event Viewer Error #7026 about it because everything seems to work OK I have read forums and gone to Google Seems to be related to Kaspersky maybe something to do with Zone Alarm or both This probably is not a major problem but I would appreciate help resolving it I may have at some time in the past downloaded Kaspersky AV and Event Viewer System Error #7026 uninstalled not sure Maybe something left over Can t find anything using Search Compaq Event Viewer System Error #7026 Presario Windows XP SP Zone Alarm Free firewall--WinPatrol--Prevx --AVG Antivirus--Spybot S amp D--SuperAntispyware--Spyware Blaster--Ad-Aware Thanks Beav I should have added When going to Compaq help and support center I get the following EXPLANATION The specified drivers did not load correctly The driver might not be in the expected location USER ACTION Verify that the drivers are configured correctly Verify that the computer is running the most current version of the drivers Also in the Details a Version and a version are mentioned Symbolic Name EVENT BOOT SYSTEM DRIVERS FAILED Hope this helps

A:Event Viewer System Error #7026

Take a look: http://www.file.net/process/kl1.sys.htmlGenerally speaking...if the file is not in the location specified in the above link, it probably is malware.I suggest reinstalling Kasperky...and then uninstalling it properly via Add/Remove Programs...as the initial attempt to remove this.Another possibility is that the file has been removed but there still remains a pointer in your startup items which is looking for the missing file. If that is the case, you can use a tool like AutoRuns for Windows v8.73 - http://www.microsoft.com/technet/sysintern...s/AutoRuns.mspx to disable or remove the marker from your list of startup items.If using the above tool, just look on the tab marked Logons (which reflects startup items), rather than the general tab reflecting all processes and startup items.Louis

http://www.bleepingcomputer.com/forums/t/130183/event-viewer-system-error-7026/
Relevancy 71.38%

Hi All;

From time to time on my XP Home SP2 machine I get a "TCP/IP has reached the security limit imposed on the number of concurrent TCP connect attempts." warning.

I've read the MS Help and Support info, do not have a virus or malware as was suggested in the article and I tried the cmd line: netstat -no proceedure to no avail.

It's not the end of the world and my dsl has no other issues.

I can live with it, but wonder you know of a work-around.

Certainly appreciate any help.
 

A:Tcpip Warning in Event Viewer/System

Concurrent Session usually are found in your browser or a Torrent client application.
Limits on them are imposed to ensure your system does not drown and lockup due
to excessive connections from ONE application.

Reaching the limit is non-fatal; ie the programs should continue.
 

http://www.techspot.com/community/topics/tcpip-warning-in-event-viewer-system.106349/
Relevancy 71.38%

Hi my pc has been freezing up off amp on for the last two wks or so I ve ran every scan Ad-aware SE Spybot McAfee etc and have found no reason for this messages Event System in Error Viewer... I checked in the Error messages in System Event Viewer... System Event Viewer tonight to see what error messages I ve been getting and it seems that everytime it freezes it sends an error message to the event viewer the errors are quot atapi quot and quot cdrom quot I have suspected that I have a problem with my cdrom drive because at times it will not open could these errors be causing the freeze ups Error messages in System Event Viewer... that have been happening every few seconds amp lasting a few seconds It doesn t happen all the time it s not happened for two straight days until earlier this evening Is this something that can be fixed Anyone have any advice for me Thanks so much BTW I am running windows xp home If more info is needed plz let me know nbsp

Relevancy 71.38%

I have been experiencing random crashes usually related to being on the internet and scrolling The mouse stops working screen freezes goes dark blue and stays that way until I re-boot I just installed a new monitor to make sure it was not a failing CRT dinosaur I have installed removed and then installed an old mouse Viewer fasttx2k System - Event error driver Have updated the video driver checked BIOS etc Another tech site System Event Viewer error - fasttx2k suggested for another user with this problem to check the System Event viewer The error message shows fasttx k and the explanation is quot Internal error in data structures for quot no words between for and period There have also been occasions where the freeze occurs and the error message is dhcp quot IP address lease denied quot Not sure if these two are related Research of similar problems indicate it may be a drive problem The only error messages I have seen that are drive related are Disk and ftdisk warnings - quot System failed to flush data to the transaction log Corruption may occur quot and quot error detected on device during a paging operation quot These are directed at my SATA storage drive not the IDE OS drive Regarding the ability to set up RAID on this MB since I am running my OS on an IDE drive and only using the SATA connection as a secondary storage drive do I need the Onboard Promise Controller enabled in the BIOS One thing I think I need to do is clean up my registry but have never attempted anything like that I also need to clean up some unused games on the computer my kids have outgrown So this seems a bit confusing but this is all the information I have so far Any help would be greatly appreciated domer

http://www.techsupportforum.com/forums/f10/system-event-viewer-error-fasttx2k-449421.html
Relevancy 70.52%

I ve recently installed Windows on a new pc and am having distinct issues The first is that I have found that I am unable to make many programs start with Windows Avast will as will AI Roboform and Open Office but other 2 Programs with Event start log Windows, error fail in Viewer issues: to simply refuse to do so My firewall Look n Stop for example has the option quot Start with Windows quot Checking the box has no effect the program fails to start with Windows This issue is repeated with a number of other programs e g Speedfan Peerblock In addition adding the programs to the Startup 2 issues: Programs fail to start with Windows, error in Event Viewer log folder has variable success The firewall for example does load on startup when added to 2 issues: Programs fail to start with Windows, error in Event Viewer log the startup folder but neither Speedfan or Peerblock do The second problem is that I am registering the error quot The following boot-start or system-start driver s failed to load EIO XP quot in the Administrative Events section of Event Viewer I ve searched everywhere and have been unable to find a copy of this driver It appears to be associated with the ASUS Smartdoctor utility which I do not have I did download and install it to see if that corrected the problem but it did not and I have since uninstalled it I am running Win bit Any suggestions much appreciated nbsp

A:2 issues: Programs fail to start with Windows, error in Event Viewer log

Are the programs with which you are having problems compatible with Windows 7 64-bit?
 

https://forums.techguy.org/threads/2-issues-programs-fail-to-start-with-windows-error-in-event-viewer-log.954984/
Relevancy 70.52%

Hi guys everytime i turn on my pc and look at my Event Viewer log i see Service Control Manager Error does anyone know how to fix this problem Here are the details System - Provider Name Service Control Manager Guid d -a d - - e e- d f EventSourceName Service Control Manager - EventID Qualifiers Version Level Task Opcode Keywords x - TimeCreated SystemTime - - T Z EventRecordID Correlation - Execution ProcessID ThreadID Channel System Computer Amir-PC Security - EventData System Viewer Service Control Event Manager param Diagnostic Service Host param im using OS Windows Home Premium x SP CPU Intel R Core TM i - K CPU GHz Motherboard ASUSTeK Computer INC P Z -V GEN Memory G SKILL Sniper Series GB DDR PC Graphics Card ASUS GTX TI-DC O- GD Sound Card HT OMEGA Claro Halo Monitor s Displays ASUS VE H Black quot ms Screen Resolution x its just every time i open my event viewer log i see this error on it can someone explain to me how Service Control Manager Event Viewer System to fix it thanks

A:Service Control Manager Event Viewer System

Hi can you try the sfc /scannow command and see if it finds anything? SFC /SCANNOW Command - System File Checker

http://www.sevenforums.com/general-discussion/286901-service-control-manager-event-viewer-system.html
Relevancy 70.52%

I had noticed I was getting audit failures 5061 and was able to narrow it down to Nicosia streaming service. I stopped the service for that but now I don't even see success audits for system integrity. I am a little concerned and going bonkers over this. Using Windows 7 64bit. Ran malware bytes, Norton and Sfc scan and everything came back normal. I've checked my other Windows 7 computers and they all have system integrity checks from the moment the system boots. Am I going crazy or what?

Thanks!

http://www.sevenforums.com/general-discussion/386111-no-system-integrity-checks-being-shown-event-viewer.html
Relevancy 70.52%

In the Event Viewer - system log - I am getting some errors when I boot up I had a voodoo card in here and removed it and had some of those errors but I searched the registry and got ride of those files and those errors went away and now I have some more I don t know if removing dfx voodoo files on the HD and registry entries caused this or not Here are the errors Event Type Error Event Source Service Control Manager Event Category None Event ID Date Time PM User N A Computer CELERON Description The fxgpio service failed to start due to the following error The system cannot find the file specified AND Event Type Error Event Source Service Control Manager Event Category None Event ID Date Time PM User N A Computer CELERON Description The fxptl service failed to start due to the following error The system cannot find the file specified AND Event Type Error Event Source Service Control Manager Event Category None Event ID Date Time PM User N A Computer CELERON Description The Ntremap service failed to start due to the following error The system cannot find the file specified I have rebooted several times and these keep appearing after every reboot Any help would be appreciated I am not haveing any - Viewer {Solved} System Event - Win2K - errors... Log problems that I know of but I {Solved} - Win2K - Event Viewer - System Log errors... would just like to get rid of all these errors Thanks Cory ------------------ http ShopComputerAces com nbsp

A:{Solved} - Win2K - Event Viewer - System Log errors...

Greetings

They look like services set to run to make the use of the 3dFX card work properly. And, since you have uninstalled the card (and the drivers) the files are no longer on the HD. Byt, the entries to the services ARE still in the registry.

I suggest doing a search for "fxgpio", "fxptl" and "Ntremap" and delte the entries you find (of course, export the entries first, so you can replace them if things go wrong).

Cheers

------------------
Reuel Miller
Windows NT Moderator (yes, that does make me biased )

[email protected]

Every morning is the dawn of a new error...
 

https://forums.techguy.org/threads/solved-win2k-event-viewer-system-log-errors.28591/
Relevancy 70.52%

I had noticed I was getting audit failures 5061 and was able to narrow it down to Nicosia streaming service. I stopped the service for that but now I don't even see success audits for system integrity. I am a little concerned and going bonkers over this. Using Windows 7 64bit. Ran malware bytes, Norton and Sfc scan and everything came back normal. I've checked my other Windows 7 computers and they all have system integrity checks from the moment the system boots. Am I going crazy or what?

Thanks!

http://www.sevenforums.com/bsod-help-support/386111-no-system-integrity-checks-being-shown-event-viewer.html
Relevancy 70.52%

Hello everyone.

I've search the forums but haven't found this.

I apologize in advance if a similar topic already exists, I haven't found one.

I have a notebook toshiba a200-14d with XP running.

If i run eventvwr and go to System, in that log, I found a lot of identical errors.

Here are the details :

Type: Error
Source: Disk
Category: none
Event ID: 11

Description:
The driver detected a controller error on \Device\Harddisk1\D.

For more information, see Help and Support Center at
ht.

The logs shows that these errors occurred for 2 minutes, continuously. starting from 3:48:27 to 3:50:17.

Can anyone explain me what does this mean? Should I worry in any way?

A:Event Viewer > System shows a lot of errors from disk

Backup your data and replace it.

http://www.techsupportforum.com/forums/f10/event-viewer-system-shows-a-lot-of-errors-from-disk-177967.html
Relevancy 70.52%

Hello all I have been working with Cookiegal for some time now She mentioned that we have moved into an area that is outside of her field of expertise I seem to have a corrupted Event Solved: Errors reboot System In during Viewer metabase in IIS I had a look at this link http www iisfaq com Default aspx tabid and as outlined on Solved: Errors In System Event Viewer during reboot that page I ran the command cscript adsutil vbs enum from inside the C Inetpub Adminscripts folder and it did return the error - x I understand from this that I do need to restore the metabase I don t know how to ascertain if there is a backup or not There are a couple of other system event errors upon rebooting that I d like to eliminate as well I have tried uninstalling and reinstalling IIS but there Solved: Errors In System Event Viewer during reboot are problems writing encryped files and the errors persist Thanks in advance for any comments or suggestions that may help me to get rid of those errors If you know how to search and find my other thread in these forums you can view the various errors that I have ben talking about with Cookiegal nbsp

A:Solved: Errors In System Event Viewer during reboot

Specifically, this: http://support.microsoft.com/default.aspx?scid=kb;en-us;Q234429 is the link that I am looking at.
 

https://forums.techguy.org/threads/solved-errors-in-system-event-viewer-during-reboot.703685/
Relevancy 70.52%

Alright Here s what s going on Fast User Switching Compatibility service won t start because it depends on the Terminal Services service The terminal service will not start either I am suspecting that these errors 7023 Services - Terminal Event Won't Start are also what is halting the explorer The system regularly Terminal Services Won't Start - Event 7023 produces the following errors in the event viewer Event Type ErrorEvent Source Service Control ManagerEvent Category NoneEvent ID Date Time AMUser N AComputer EEP Description The Terminal Services service terminated with the following error The specified module could not be found For more information see Help and Support Center at http go microsoft com fwlink events asp Event Type ErrorEvent Source Service Control ManagerEvent Category NoneEvent ID Date Time AMUser N AComputer EEP Description The Fast User Switching Compatibility service depends on the Terminal Services service which failed to start because of the following error The specified module could not be found For more information see Help and Support Center at http go microsoft com fwlink events asp quot The specified module could not be found quot is sort of an ambiguous diagnosis I ve researched and attempted the following fixes I had an Ethernet card that was not operational because I couldn t find the correct drivers I located and installed the drivers and it is now working properly in the device manager I turned on the Windows Firewall due to some related issues in SP where services would fail after disabling this service I am currently using sp but I figure it couldn t hurt I have run sfc scannow in the command prompt I have updated the registry entry via http www kellys-korner-xp com xp tweaks htm tip I have replaced termsrv dll in C WINDOWS system and C WINDOWS system dllcache Ran Combofix exeNone of these fixes have repaired the problem Any ideas Thanks Mattpeg

A:Terminal Services Won't Start - Event 7023

Start/Run...type services.msc and hit Enter.

Scroll down to Terminal Services. What is the status...what is the startup type reflected?

Louis

http://www.bleepingcomputer.com/forums/t/244891/terminal-services-wont-start-event-7023/
Relevancy 70.52%

I have log event services.msc start disabled button - Windows XP Home SP services.msc - event log start button disabled - the event log start button is disabled its all gray d out and unclickable you need to start it in order for windows update to accurately update and update everything also which I think is related maybe although I have dL d and installed the latest Flash player several times and restarted thereafter as well as Adobe Acrobat I cannot play myspace or youTube videos I get the dreaded Box with a Red X versus a snapshot of the video with a play button - and both sites keep telling me that I need the latest Flash Palyer I m in a catch- with this And when I go to any site for any product ie a printer I m seeking troubleshooting for it and need to view their online manual I also get a Red X as if its not recognizing Acrobat pdf And yes I DO have java scripting enabled Help nbsp

Relevancy 69.23%

Hi this is in followup to a suggestion by Cookiegal http forums techguy org virus-oth luggish-computer-hjt-error- html post At the above site Cookiegal tried to help on the Application & Event Viewer computer System errors causing sluggish software end removing malware amp such but she said that I had what looks like Event Viewer System & Application errors causing sluggish computer hardware errors possibly with the BIOS Assistance here would be appreciated Following are the errors within the Event Viewer Event Viewer - Application Event Type Error Event Source Application Error Event Category None Event ID Date Time AM User N A Computer CPQ Description Fault bucket For more information see Help and Support Center at http go microsoft com fwlink events asp Data b a Bucket d a Event Type Error Event Source Application Error Event Category None Event ID Date Time PM User N A Computer CPQ Description Faulting application explorer exe version faulting module unknown Event Viewer System & Application errors causing sluggish computer version fault address x For more information see Help and Support Center at http go microsoft com fwlink events asp Data c Applicat f e c ion Fail ure exp c f e lorer ex e e e e e e b e f in unkno e e e wn e f at of fset d a Event Type Error Event Source Application Error Event Category Event ID Date Time PM User N A Computer CPQ Description Faulting application drwtsn exe version faulting module dbghelp dll version fault address x d For more information see Help and Support Center at http go microsoft com fwlink events asp Data c Applicat f e c ion Fail ure drw e e tsn ex e e e e e in c e dbghelp c c e e dll e f at off set d Event Type Error Event Source Application Error Event Category None Event ID Date Time PM User N A Computer CPQ Description Faulting application explorer exe version faulting module unknown version fault address x cb For more information see Help and Support Center at http go microsoft com fwlink events asp Data c Applicat f e c ion Fail ure exp c f e lorer ex e e e e e e b e f in unkno e e e wn e f at of fset c d a b Event Viewer - System Event Type Warning Event Source Tcpip Event Category None Event ID Date Time AM User N A Computer CPQ Description TCP IP has reached the security limit imposed on the number of concurrent TCP connect attempts For more information see Help and Support Center at http go microsoft com fwlink events asp Data T Event Type Error Event Source Service Control Manager Event Category None Event ID Date Time AM User N A Computer CPQ Description The Ati HotKey Poller service failed to start due to the following error The service did not respond to the start or control request in a timely fashion For more information see Help and Support Center at http go microsoft com fwlink events asp Event Type Error Event Source Service Control Manager Event Category None Event ID Date Time AM User N A Computer CPQ Description Timeout milliseconds waiting for the Ati HotKey Poller service to connect For more information see Help and Support Center at http go microsoft com fwlink events asp Event Type Error Event Source ACPI Event Category None Event ID Date Time AM User N A Computer CPQ Description AMLI ACPI BIOS is attempting to read from an illegal IO port address x which lies in the x - x protected address range This could lead to system instability Please contact your system vendor for technical assistance For more information see Help and Support Center at http go microsoft com fwlink events asp Data R c Event Type Error Event Source ACPI Event Category None Event ID Date Time AM User N A Computer CPQ Description AMLI ACPI BIOS is attempting to write to an illegal IO port address x which lies in the x - x protected address range This could lead to system instability Please contact your system vendor for technical assistance For more information see Help and Support Center at http go microsoft com fwlink events asp Data R c Event Type Warning Event Source ... Read more

Relevancy 69.23%

I had noticed I was getting audit failures 5061 and was able to narrow it down to Nicosia streaming service. I stopped the service for that but now I don't even see success audits for system integrity. I am a little concerned and going bonkers over this. Using Windows 7 64bit. Ran malware bytes, Norton and Sfc scan and everything came back normal. I've checked my other Windows 7 computers and they all have system integrity checks from the moment the system boots. Am I going crazy or what? Thanks!

A:No system integrity checks are being shown in the event viewer in audit success.

There are errors which show up in the Event Viewer which really aren't problems.  Knowing what these are and which ones to be concerned about is not something you will be able to master overnight.  Please post the requested information below and we can get a better idea of what is going on.
 
Please download MiniToolBox to your desktop.
 
Right-click on MiniToolBox.exe and select Run as Administrator.
 
You will see an image like the one below.
 

 
Click on the following checkboxes only:
 
• List last 10 Event Viewer log
• List Installed Programs
• List Users, Partitions and Memory size.
• List Minidump Files
 
Click on Go to start the scan.  Once it is finished highlight the text, then copy it and paste it in your topic.

http://www.bleepingcomputer.com/forums/t/597033/no-system-integrity-checks-are-being-shown-in-the-event-viewer-in-audit-success/
Relevancy 68.8%

Ok, I need some direction here.
This box is an NT4 and I'm trying to find where and how I address this message.

Dialog box with Event Log Services - System log is full.

It looks like the Disk is full and I can't find anything to remove until I talk to the user.
How do I address this message, I'm not an NT guy.

Should be relatively easy to find, went into Control Panel and Services but don't see anything I can tweak.

Direction appreciated.
 

A:Solved: NT4 Event Log Services - System Log is full

Ok Resolved - found it in the Start Menu - Event Viewer - Log settings
Cleared it out and move some big files to another drive.

Thanks for readings.
 

https://forums.techguy.org/threads/solved-nt4-event-log-services-system-log-is-full.498211/
Relevancy 68.37%

The BCM RLY service failed to start due to the following error The system cannot find the file specified The driver Driver WUDFRd failed to load for the device ACPI PNP A A amp daba ff amp PMEM is new other two been around a while The PMEM service failed to start due to the following error This driver has been blocked from loading C Windows SysWOW drivers pmemnt sys has been blocked from loading System Nagging Mssgs (BCM42RLY/PMEM/WUDFRd) ... Stable Viewer Event due to incompatibility with this system Please contact your software vendor for a compatible version of the driver Only negative aspect so far has been Windows backup wont run with an error message quot The service can not be started either because it us disabled or because it has no enabled devices associated with it x Checked the path on PMEM looks right Found at C Windows SysWOW drivers pmemnt sys C Windows System drivers pmemnt sys The BCM RLY is related to wireless which I tried installing reinstalling and it took me almost a week ti get wireless working again I believe it's related to the WUD one and that the other two are obviously also relatred to each other Will keep yahoo'ing but if any one else has seen before wud appreciate a pointer

A:System Stable ... Nagging Event Viewer Mssgs (BCM42RLY/PMEM/WUDFRd)

Do you still need assistance with this issue?

http://www.sevenforums.com/drivers/315660-system-stable-nagging-event-viewer-mssgs-bcm42rly-pmem-wudfrd.html
Relevancy 67.51%

Hello
I am new to Microsoft Message Analyzer and just downloaded version 1.4 and installed on my Windows 10 laptop
I saved my Windows System Event log as an .evtx file to have some data to start looking at. I note the column entitled 'summary' appears to show the body of the event message. However I see many rows which state "unable to retrieve the event description"
in this column, what do I need to do to fix this issues please? could it of been the way that I saved the .evtx file in the first instance (I accepted the defaults) or do I need to install some additional files/components so the messages are displayed
correctly?

Thanks all
Ernest

https://social.technet.microsoft.com/Forums/en-US/a02a5fbb-39e8-4998-8b8d-ec30abd458a0/when-viewing-system-event-log-evtx-file-many-events-show-quotunable-to-retrieve-the-event?forum=messageanalyzer
Relevancy 67.08%

Thanks for any help.

Event Type: Warning
Event Source: WinMgmt
Event Category: None
Event ID: 5603
Date: 28/11/2006
Time: 17:57:33
User: USER-2F62D3344E\user
Computer: USER-2F62D3344E
Description:
A provider, OffProv11, has been registered in the WMI namespace, Root\MSAPPS11, but did not specify the HostingModel property. This provider will be run using the LocalSystem account. This account is privileged and the provider may cause a security violation if it does not correctly impersonate user requests. Ensure that provider has been reviewed for security behavior and update the HostingModel property of the provider registration to an account with the least privileges possible for the required functionality.

For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

A:What's this event in event viewer? (event source WinMgmt)

http://support.microsoft.com/default...b;en-us;891642
this might help

http://www.techsupportforum.com/forums/f10/whats-this-event-in-event-viewer-event-source-winmgmt-128694.html
Relevancy 66.22%

Hey there,

Guess this is going to be my first asking post ^^

I've been having problems with installing certain applications, e.g Autocad LT 2006

I was able to have it running under both compatibility mode and w7 mode using both local and domain administrator.

However I am unable to run it as a standard user or as a power user

Anyone has encountered such issues?

Any workarounds?

Thank you in advanced

A:Unable to start certain applications on different user

Welcome

See if these instructions help

Take Ownership of file - Vista Forums

http://www.sevenforums.com/software/62809-unable-start-certain-applications-different-user.html
Relevancy 65.79%

DETAIL - 
 6 user registry handles leaked from \Registry\User\S-1-5-21-876378617-1490751924-622671684-72003:
Process 768 (\Device\HarddiskVolume2\Windows\System32\lsass.exe) has opened key \REGISTRY\USER\S-1-5-21-876378617-1490751924-622671684-72003
Process 768 (\Device\HarddiskVolume2\Windows\System32\lsass.exe) has opened key \REGISTRY\USER\S-1-5-21-876378617-1490751924-622671684-72003
Process 704 (\Device\HarddiskVolume2\Windows\System32\winlogon.exe) has opened key \REGISTRY\USER\S-1-5-21-876378617-1490751924-622671684-72003
Process 768 (\Device\HarddiskVolume2\Windows\System32\lsass.exe) has opened key \REGISTRY\USER\S-1-5-21-876378617-1490751924-622671684-72003\Software\Microsoft\SystemCertificates\Disallowed
Process 768 (\Device\HarddiskVolume2\Windows\System32\lsass.exe) has opened key \REGISTRY\USER\S-1-5-21-876378617-1490751924-622671684-72003\Software\Microsoft\SystemCertificates\MY
Process 768 (\Device\HarddiskVolume2\Windows\System32\lsass.exe) has opened key \REGISTRY\USER\S-1-5-21-876378617-1490751924-622671684-72003\Software\Microsoft\SystemCertificates\CA

https://social.technet.microsoft.com/Forums/en-US/18c23752-4b9a-4ab5-b0d8-17cf8e5e2205/windows-detected-your-registry-file-is-still-in-use-by-other-applications-or-services-the-file-will?forum=w7itprogeneral
Relevancy 65.79%

Hi keep getting the errors above every startup regarding - Custom dynamic link libraries are being loaded for every application The system administrator should review the list of libraries to ensure they are related to trusted applications - The Crypkey License service failed to start due to the following error The system cannot find the file specified - The following boot-start or system-start driver s failed to load NetworkX - Windows detected your registry file is still in use by other applications or services The file will be unloaded now The applications or services that hold your registry file may not function properly afterwards DETAIL - user registry handles 7026), 7: viewer event Windows freeze. and errors intellipoint Event (11, 7000, leaked from Registry User S- - - - - - - Classes Process Device HarddiskVolume Program Files Microsoft Security Client MsMpEng exe has opened key REGISTRY USER S- - - - - - - CLASSES - The content source lt csc S- - - - - - Windows 7: Event errors (11, 7000, 7026), intellipoint and event viewer freeze. - gt cannot be accessed Context Application SystemIndex Catalog Details HRESULT x x I have admin user profiles Each time I login the loading happens and then I notice my side mouse button of Microsoft Comfort Optical doesnt operate as customised in Intellipoint It takes a long time before it does respond If I try to launch event viewer or mouse customisation softwares they freeze temporarily and I have to force close them shows me a windows shell error Windows 7: Event errors (11, 7000, 7026), intellipoint and event viewer freeze. when I do this I've tried System restore and safe mode and many solutions via google associated with symptoms and error ids but no avail Please help me fix this - Thanks

A:Windows 7: Event errors (11, 7000, 7026), intellipoint and event viewer freeze.

Please download MiniToolBox  , save it to your desktop and run it.
 Checkmark the following checkboxes:  List last 10 Event Viewer log  List Installed Programs  List Users, Partitions and Memory size.
 Click Go and paste the content into your next post.
 Also...please Publish a Snapshot using Speccy - http://www.bleepingcomputer.com/forums/topic323892.html/page__p__1797792#entry1797792 , taking care to post the link of the snapshot in your next post. 
Louis

http://www.bleepingcomputer.com/forums/t/603889/windows-7-event-errors-11-7000-7026-intellipoint-and-event-viewer-freeze/
Relevancy 65.79%

I was running DMark and got a BSOD code After that every Event and every time Logs BSOD After 3011 ID Event I boot Viewer 3012 time I boot Event Viewer logs Error Codes ID and Attached are screenshots of both I googled this and found two different threads where someone suggested to rebuild the performance counters After BSOD Event Viewer Logs Event ID 3012 and 3011 every time I boot Both responses were basically the same below is one Neither of the OP's came back and said if this worked for After BSOD Event Viewer Logs Event ID 3012 and 3011 every time I boot them Re LoadPerf Hi- I had the same problem with LoadPerf and here is what I found out All performance counter names and explain text are maintained in string tables managed by the performance counter subsystem Perflib The current contents of the performance counter string tables are corrupted and cannot be displayed To correct the problem rebuild the string tables User Action To rebuild the string tables on the computer that displayed the message at the command After BSOD Event Viewer Logs Event ID 3012 and 3011 every time I boot prompt type Lodctr r The contents of the string tables are automatically rebuilt I hope this helps Since this was from XP and the other response was for Vista I wanted to see if the guru's at SevenForums thought that this was okay before I did this Here are the screenshoots of my two errors

A:After BSOD Event Viewer Logs Event ID 3012 and 3011 every time I boot

Rebuilding the string tables as outlined in my first post fixed the problem.

http://www.sevenforums.com/bsod-help-support/305115-after-bsod-event-viewer-logs-event-id-3012-3011-every-time-i-boot.html
Relevancy 65.79%

Hi keep getting the errors above every startup regarding - quot Custom dynamic link libraries are being loaded for every application The system administrator should review the list intellipoint Event freeze. (11, viewer 7026), event errors and 7000, of libraries to ensure they are related to trusted applications quot - quot The Event errors (11, 7000, 7026), intellipoint and event viewer freeze. Crypkey License service failed to start due to the following error The system cannot find the file specified quot - quot The following boot-start or system-start driver s failed to load NetworkX quot - quot Windows detected your registry file is still in use by other applications or services The file will be unloaded now The applications or services that hold your registry file may not function properly afterwards DETAIL - user registry handles leaked from Registry User S- - - - - - - Classes Process Device HarddiskVolume Program Files Microsoft Security Client MsMpEng exe has opened key REGISTRY USER S- - - - - - - CLASSES quot - quot The content source lt csc S- - - - - - - gt cannot be accessed Context Application SystemIndex Catalog Details HRESULT x x quot I have admin user profiles Each time I login the loading happens and then I notice my side mouse button of Microsoft Comfort Optical doesnt operate as customised in Intellipoint It takes a long time before it does respond If I try to launch event viewer or mouse customisation softwares they freeze temporarily and I have to force close them shows me a windows shell error when I do this I've tried System restore and safe mode and many solutions via google associated with symptoms and error ids but no avail Please help me fix this - Thanks

A:Event errors (11, 7000, 7026), intellipoint and event viewer freeze.

Hiya and welcome to SevenForums!
Please contact an admin to move this thread, because this isn't the appropriate section for these kinds of problems.

http://www.sevenforums.com/general-discussion/390571-event-errors-11-7000-7026-intellipoint-event-viewer-freeze.html
Relevancy 65.79%

Hi I was hoping somebody could offer an insight on the below as searching around I've not found much to go on other than quot overheating quot Basically my laptop has Home (W7 event 18/19 Viewer errors WHEA-Logger in Event Premium) been having very high temperatures for a long time usually C for CPU and often - for GPU insanely high in other words For example see how hot the machine gets just by resuming from a sleep this is all within a minute or so I have been seeing the following error in event viewer each time I start Windows entries for some time So today I bit the bullet and had the back cover off the laptop and noticed what a bad state the thermal compound was in for both the CPU and the chipset WHEA-Logger event 18/19 errors in Event Viewer (W7 Home Premium) chip so wiped it off using TIM Cleaner and then applied new thermal compound and put the laptop back together I was actually shocked because for the first time since I can remember I could feel cold air blowing from the vents of my laptop I logged into Windows and noticed that my temperatures had fallen and were staying at around the below Not as low as I'd like but a massive improvement Trouble is I am still getting the WHEA-Logger event errors in Windows Event Viewer 'processor core' and wondered if this was not in regards to overheating after all The plus side is my laptop is now almost totally silent - the way it must have been when I bought it new years ago But I was wondering how to investigate these WHEA-Logger errors if anyone has any advice that'd be great Thanks PS - I think I accidentally got some TIM Cleaner spilt on the carpet Might be nothing to worry about but I did notice the quot Harmful quot hazard symbol on the bottle - need I be worried and no I am not talking about the carpet talking about me and wondering how harmful it actually is lol Cheers

A:WHEA-Logger event 18/19 errors in Event Viewer (W7 Home Premium)

First, well done on applying the thermal paste to the cpu/gpu. I assume you cleaned the vents as well. Did you use arctic silver 5 (just curious)?

I wonder if the processor could have been damaged from the heat. Are you experiencing any BSODs or other problems? You can run Prime95 to test your system. And Furmark for gpu.

http://www.sevenforums.com/hardware-devices/210307-whea-logger-event-18-19-errors-event-viewer-w7-home-premium.html
Relevancy 65.79%

Hi keep getting the errors above every startup regarding - quot Custom dynamic link libraries are being loaded for every application The system administrator should review the list of libraries to ensure they are related to trusted applications quot 7000, viewer errors event (11, and Event intellipoint freeze. 7026), - quot The Crypkey License service failed to start due to the following error The system cannot find the file specified quot - quot The following boot-start or system-start driver s failed to load NetworkX quot - quot Windows detected your registry file is still in use by other applications or services The file will be unloaded now The applications or services that hold your registry file may not function properly afterwards DETAIL - user registry handles Event errors (11, 7000, 7026), intellipoint and event viewer freeze. leaked from Registry User S- - - - - - - Classes Process Device HarddiskVolume Program Files Microsoft Security Client MsMpEng exe has opened key REGISTRY USER S- - - - - - - CLASSES quot - quot The content source lt csc S- - - - - - - gt cannot be accessed Context Application SystemIndex Catalog Details HRESULT x x quot I have admin user profiles Each time I login the loading happens and then I notice my side mouse button of Microsoft Comfort Optical doesnt operate as customised in Intellipoint It takes a long time before it does respond If I try to launch event viewer or mouse customisation softwares they freeze temporarily and I have to force close them shows me a windows shell error when I do this I've tried System restore and safe mode and many solutions via google associated with symptoms and error ids but no avail Please help me fix this - Thanks

http://www.sevenforums.com/bsod-help-support/390571-event-errors-11-7000-7026-intellipoint-event-viewer-freeze.html
Relevancy 65.36%

I have been running into this problem for some weeks now and thought it's time to seek additional help Initially i was unable to launch exe applications that relied on the MSI installer so i searched for a solution the solution was to got to services and start the 'windows installer service' doing this certain (0xc0150004) error Unable start applications to .exe fixed some of the issues but apparently not all of them I still can't run Fireworks or AvastUI exe and other apps such as Upgrade Advisor Heck i can't even run certain windows updates I have a HP desktop running Windows x Home Premium Unable to start certain .exe applications error (0xc0150004) I know Unable to start certain .exe applications error (0xc0150004) for a fact that there are no mal ad spyware on my computer I have ran Trojan Remover and removed all the junk that i'm sure caused the problem in the first place Here are some windows provided solutions i have tried I have ran all MS 'Fix-It' apps uninstalled reinstalled my apps went to command line ran 'msiexec regserver' I know windows installer is installed but its corrupted for sure Any solution suggestions are welcome my last resort is to wipe out the OS and reinstall it I hope this is the right forum to post this in if not please let me know

A:Unable to start certain .exe applications error (0xc0150004)

Have you tried sfc /scannow from an elevated command prompt?

http://www.sevenforums.com/bsod-help-support/225496-unable-start-certain-exe-applications-error-0xc0150004.html
Relevancy 65.36%

Earlier today, my computer is not working properly since i started it up.
An error would show everytime a programs try to start.
It would show " The application was unable to start correctly (0xc00000b5). " everytime i try to start google chrome. Other programs like games also creates error, some with different error codes like (0xc0000185).
Steam has creates a different error which says
" Steam.exe(main exception): Unable to load library SteamUI.dll, Win32 Error 121 "The semaphore timeout period has expired."
However, some programs like internet explorer, photoshop and microsoft office would work, which i suspect is because they are 64bit softwares.

Can anyone please help me to solve this error? It's really annoying.

A:Applications unable to start correctly error.

Have you tried this tutorial?
SFC /SCANNOW Command - System File Checker

Also if you can post results from doing this.

http://www.sevenforums.com/software/190315-applications-unable-start-correctly-error.html
Relevancy 65.36%

EDIT: ARGH, sorry, meant to post this in General Discussion forum, I have no idea if it is a network issue.

Hello everyone,

I keep seeing this error appear several times a day, even during idle, in my Event Viewer. I did a clean install of build 10586 less than a month ago. I'm not having any overt issues yet, but the error is disturbing.

SettingSyncHost (9144) {979B90BD-0F81-4D83-B038-62032DD17C47}: Database C:\Users\xxxxx\AppData\Local\Microsoft\Windows\SettingSync\metastore\meta.edb: Index deleteDetection of table items is corrupted (0).
I have spent a few hours researching this and I can't find any reports of similar issues or even what the file metastore\meta.edb is for. Is this hopefully one I can just rename and it'll automatically create a new one?

http://www.tenforums.com/network-sharing/32490-event-viewer-errors-settingsynchost-source-esent-event-467-a.html
Relevancy 65.36%

It's been a while since I've experienced a BSOD as I'm viewing a video on youtube It would freeze as if the audio was caught watching videos Event Event BSOD Viewer on 41 in youtube, when in mid-stream then BSOD then would restart automatically I go to Event Viewer after windows as loaded and I see Event Kernel-Power in there I had this issue before and we found out that the motherboard was causing the issue I BSOD when watching videos on youtube, Event 41 in Event Viewer have also replaced my video card and added BSOD when watching videos on youtube, Event 41 in Event Viewer additional memory and expanded to gb Before I only have gb Ran sfc scannow with no errors found Going to do chkdsk as well It's strange because this does not happen at all when I'm playing online games or even just standard browsing It's when I play videos on youtube that there would be instances where this would happen There are other times where I can view them without any issue at all Any ideas would be great Also how can I attach the windows DMP file to scale it down as it is just really large Thanks again guys

A:BSOD when watching videos on youtube, Event 41 in Event Viewer

Hello Santos, and welcome to Seven Forums.

Please read the instructions here: Blue Screen of Death (BSOD) Posting Instructions, and post back with the needed information. One of our BSOD experts should be by later when able to further help.

http://www.sevenforums.com/bsod-help-support/324644-bsod-when-watching-videos-youtube-event-41-event-viewer.html
Relevancy 65.36%

Well I tryed to manage page-file but unfortunataly it resulted in problems Then I lost VAIO-CARE and ZIP files too When I open Event Viewer every single day I see this event Viewer 2002, EapHost, Log Event Source: Application Event Id Id Souce Eap Host Log name Application and number of Eventes As I am desparate about that What sould I do Reinstall VAIO-care or WHAT Event Viewer Event Id 2002, Source: EapHost, Log Application else Please help me Well I can say that before of all I tryed to install vopt latest version but it was not freeware and I soon had to uninstall it but it was not getting to uninstall from programs and features and then I used register editor to delete the leftovers which desapered from program and features but I can see several error in event viewr such as Event MsInstaller gt gt gt gt Product Vaio Media Plus -- Error - An instalation for the product Vaio Media Plus cannot be found Try the installation again using a valid copy of the instalation package 'VMP VEPMMx msi' So should I reinstall all vaio care or not By the way I tryed to install vopt in order to align files in hard drive but when I tryed to manage page file it did not work as should have so I lost vaio care What to do can you figure out what going on

A:Event Viewer Event Id 2002, Source: EapHost, Log Application

Welcome to the forums Marioo!

Have you tried a system restore to a point before these errors started? (Easiest things first) You could also try a sfc/scannow, to find and possibly repair any corrupted system files. We have many fine tutorials here at the forums, written by some very knowledgeable people, heres a link to one if you haven't did this before :

SFC /SCANNOW Command - System File Checker

http://www.sevenforums.com/general-discussion/319083-event-viewer-event-id-2002-source-eaphost-log-application.html
Relevancy 65.36%

After too many The 8.1 supported is request logs. Pro, (50) Viewer cannot open Win not event Event unexplained problems I decided to reinstall Windows Pro x and migrate off of SBS Standard In addition to the primary workstation that can't read any event logs I built five Server R servers Hyper-V host Active Directory VM Exchange VM SQL Server VM Win 8.1 Pro, Event Viewer cannot open event logs. The request is not supported (50) and WSUS VM I was diagnosing why my workstation's Outlook cannot reach the local Exchange Server nbsp nbsp I tried to look at the event logs and Win 8.1 Pro, Event Viewer cannot open event logs. The request is not supported (50) found the Event Viewer cannot open the event log or custom view nbsp Verify that Event Log service is running it is or the query is too long whatever that indicates nbsp The request is not supported Looking at the directory of the event logs folder nbsp It appears that most logs are empty which is understandable since Win 8.1 Pro, Event Viewer cannot open event logs. The request is not supported (50) it's a rebuilt installation nbsp I found a small number of Applications and Services Logs and it appears nothing was logged since six days ago on nbsp nbsp On support forums I found many have this exact problem on Win Win and Win nbsp Of the solutions posted none of them would even execute on my Win Pro x machine nbsp I tried clearing the event logs WEVTUTIL CL logfilename and am told Failed to clear log The request is not supported nbsp It's very difficult to diagnose why Outlook cannot reach Exchange even if Outlook is installed on the Exchange server machine just as a test nbsp The web-based Outlook owa ecp all work fine nbsp Email is coming and going nbsp nbsp This may appear cynical but I'm sure Microsoft would tell me to refresh the Windows Pro X machine even though I just reinstalled from scratch nbsp Let's clarify I had to Install Win Pro to upgrade to Pro in order to upgrade that to Windows Pro nbsp I tested the refresh some time ago and found it left my machine in a mess nbsp That is why I'm doing a complete new installation I already tried SFC nbsp Someone must understand the problem so a solution can be found and documented When I discuss this rebuild effort of workstation and servers I tell people if this doesn't work out then I'll make the move to Linux nbsp I have many Linux and UNIX workstations and servers sitting around here so the temptation is eating away at me br type moz - Michael Faklis

https://social.technet.microsoft.com/Forums/en-US/22647500-d985-42bd-b156-6b699d7f941f/win-81-pro-event-viewer-cannot-open-event-logs-the-request-is-not-supported-50?forum=w8itprogeneral
Relevancy 64.93%

Hi Techguys I recently installed Windows bit on a brand new build Asus X PRO Intel i k GB Corsair Vengeance Low Profile Quad Samsung SSD After installing all the software I need Windows Updates Avast Music Production iTunes Flash etc The system performed as aspected Then a few things went wrong - after opening Internet Explorer bits a sudden BSOD can t remember the errors - I had to do a system restore - I really like this system to be stable and wanted it to be as clean as possible so I uninstalled Asus Suite didn t use it to overclock - Several boot sequences were succesful - One time I didn t have internet connection - Next time Avast starts asking me for a license registration which I am not fond of Couldnt really get it licensed - Got another BSOD during Idle - Next boot the windows firewall was unable to start - Other windows applications wouldn t start - Started looking in the Event Viewer and noticed Services start unable to a few returning Services unable to start errors - BFE Acces denied - Microsoft Security Client OOBE Acces denied - Firewall Acces Denied via BFE - Diagnostic Policy Service Acces Denied - ICS Acces Denied - WMI Event filter with query quot SELECT FROM InstanceModificationEvent WITHIN WHERE TargetInstance ISA quot Win Processor quot AND TargetInstance LoadPercentage gt quot could not be reactivated in namespace quot root CIMV quot because of error x Events cannot be delivered through this filter until the problem is corrected This is my th night tryin to find out what is wrong I tried - Updating registry keys and permissions for all of the dependencies - FixIt - Auto repair All in one from tweaking com - User management While most of the problems are gone I do have internet feels smooth most applications run fine I d like a Error Free Event Viewer and I don t want to be afraid of the weekly BSOD There are a lot of forums online about some of these issues but not one solution that works for me Are all of these Error messages connected I know it seems like a virus but I m quite positive that I didn t install anything exotic and I ran a lot of tests Scannow MBAM Security Essentials Avast I m begging you hope to avoid a reinstall Do you know of the source of this problem Or even better a solution Thanks in advance nbsp

Relevancy 64.93%

Hi All,

I've had an issue with Event viewer unable to start due to "endpoint mapper database entry could not be created" Error 1899. I have done a SFC and have had some but not all issues fixed, I have a log of the result and maybe could post if needed. I've also done a system restore to a previous working config but no luck, the problem still persists. Has anyone had experience with this issue and know a fix for it?

Regards
Hiconic

A:cannot start event viewer "Error code 1899"

It's no wonder people slag off Microsoft for the lack of support. This issue has effectively stopped me from doing any back up on my PC as without the Event logging service or Event viewer service running the Back up cannot be set as it's dependent on these services which are hog tied by this endpoint mapper issue! Another Windows endless catch 22 loop!!

I can't believe no one has anything to offer on this issue! I've seen this issue raised on several forums but as yet no one seems to have the solution, which begs the question where are all the experts out there specializing in Windows 7? Suddenly, nothing happened!!

Hiconic

http://www.sevenforums.com/performance-maintenance/311430-cannot-start-event-viewer-error-code-1899-a.html
Relevancy 64.93%

I wanted to see who was viewing my computer and went to event viewer, under System > filter current log > power troubleshooter -- I found that the wake source for the system resuming from sleep was a device usb root hub, what does this mean?

http://www.sevenforums.com/system-security/384110-event-viewer-power-troubleshooter-event-question.html
Relevancy 64.93%

While playing war thunder on steam my screen went black and i couldn't do anything. I restart my computer and play again it crashes. After one more time i look at my event viewer and find critical error event ID:41. I don't whether its the game or my pc.

A:BSOD playing war thunder, Event viewer event 41

Critical error - Event ID 41 is (most likely) when you forced the system to restart (usually by holding the power button down).

You have a NETGEAR WG111v3 Wireless-G USB Adapter:





I do not recommend using wireless USB network devices. Especially in Win8/8.1 systems.
These wireless USB devices have many issues with Win7 and later - using Vista drivers with them is almost sure to cause a BSOD.
Should you want to keep using these devices, be sure to have Win8/8.1 drivers - DO NOT use Vista drivers!!!
An installable wireless PCI/PCIe card that's plugged into your motherboard is much more robust, reliable, and powerful.



I noticed that you don't have Secure Boot and/or UEFI enabled. If you were having problems with it and changed it, please let us know.





It's not necessary to enable it now. But, should you reinstall Windows at some point in the future, please enable it first.

I mention this because it may happen that (one day) the system won't boot. This can be caused by a program changing your UEFI settings, or an update of the UEFI resetting it to default values.

To test and see if this is the cause, boot into the UEFI and see if the settings have been changed. If uncertain, try with Secure Boot both on and off (and the UEFI on UEFI or Legacy (CSM))

If it still doesn't boot after trying this, then move on to other troubleshooting tools as it's not likely to be due to this.



Black screen errors are notoriously difficult to troubleshoot. Let's start with this stuff:
- update chipset, storage, Intel, video, wireless, Bluetooth drivers to the latest, Win8.1 compatible versions (DO NOT use Win8 versions, only Win8.1 - if unable to find them, post back and we'll see what we can do).

Also, please do the following:
- open Event Viewer (run eventvwr.msc from the "Run" dialog))
- expand the Custom Views category (left click on the > next to the words "Custom Views")
- right click on Administrative Events
- select "Save all Events in Custom View as..."
- save the file as Admin.evtx
- zip up the file (right click on it, select "Send to", select "Compressed (zipped) folder")
- upload it with your next post (if it's too big, then upload it to a free file-hosting service and post a link here).

While waiting for a reply, please monitor your temps with this free utility: HWMonitor CPUID - System & hardware benchmark, monitoring, reporting

http://www.eightforums.com/bsod-crashes-debugging/44720-bsod-playing-war-thunder-event-viewer-event-41-a.html
Relevancy 64.93%

If a make a password mistake when logging in, event viewer should log event with ID 4625*. But it doesn't. How do I get it too? If you want to know about my computer model Etc. Click on the computer icon next to my name.

(*Event 4625 means Bad password)

Thanks
 

A:Solved: Event ID 4625 not being logged in event viewer

I assume you are using Vista or Win 7

The following eventIDs are all related to Login Failures:
4625,4626,4627,4628,4630,4635,4649,4740,4771,4772,4777
 

https://forums.techguy.org/threads/solved-event-id-4625-not-being-logged-in-event-viewer.995501/
Relevancy 64.93%

I tried a lot, but couldn't find the event log for the cleanmgr.exe (Disk Cleanup) in the Event Viewer.
Actually, I need the source & event id of cleanmgr.exe to schedule a task in the Task Scheduler.

A:In Event Viewer, Where is event log for cleanmgr.exe (Disk Cleanup)?

This Article would be of services to you .

http://www.sevenforums.com/performance-maintenance/301369-event-viewer-where-event-log-cleanmgr-exe-disk-cleanup.html
Relevancy 64.93%

Every time I boot my laptop I get error message Event ID 11 in Event Viewer. The details are:

Custom dynamic link libraries are being loaded for every application. The system administrator should review the list of libraries to ensure they are related to trusted applications.

This is listed under AppInit_DLLs in the registry and the dll being loaded is nvinitx.dll, from what I can find out this has to do with the optimus function on my laptop and having it loaded is okay. I just want to get rid of the error message being logged everytime I boot.

A:Event Viewer Error Message Event ID11 - How do I get rid of this to?

Does anyone have any ideas on how to get rid of this error message in Event Viewer?

http://www.sevenforums.com/bsod-help-support/195339-event-viewer-error-message-event-id11-how-do-i-get-rid.html
Relevancy 64.93%

From what I understand about the event log in Windows 7, when someone tries and is unsuccessful when logging into the computer the event log should record an event id 4625. However this is not happening at either of my Windows 7 Ultimate machines. I found an identical thread about this problem where the user found a solution but did not specify what is was.

http://forums.techguy.org/general-security/995501-solved-event-id-4625-not.html

Any ideas?

Thanks
 

A:Solved: Event ID 4625 not being logged in event viewer

Are you creating a Custom View ? Be sure that you have selected 'By Log - Event Logs: Windows Log, Security. Then except for the Event ID field, everything should not be checked.
 

https://forums.techguy.org/threads/solved-event-id-4625-not-being-logged-in-event-viewer.1034583/
Relevancy 64.93%

A week ago I started getting this warning errors logged three to six times or more per day in Event Viewer Event Viewer Warning - Source is e yexpress - Event ID is Intel R V- Gigabit Network Connection Link has been disconnected Every time Event Viewer logs the e yexpress warning it follows up with this logged warning Event Viewer Warning - Source is DNS Client Events - Event ID is Name 27 - e1yexpress Warning - Event Event Viewer ID Source resolution for the name isatap Event Viewer Warning - Source e1yexpress - Event ID 27 home timed out after none of the configured DNS servers responded Not every time but a lot of times Event Viewer also logs this warning right after it logs the isatap home warning Event Viewer Warning - Source is DNS Client Events - Event ID is Name resolution for the name teredo ipv mocrosoft com timed out after none of the configured DNS servers responded Today I installed updated drivers for my Intel R V- Gigabit Network Connection but Event Viewer Warning - Source e1yexpress - Event ID 27 after hours of no logged error warnings they started up again and I got three sets of the above logged in a minute time frame My system is two years old and as far as I know I have never had these errors logged before My motherboard is a Asus Rampage III Extreme Any ideas on how to get event viewer to stop logging these A google Event Viewer Warning - Source e1yexpress - Event ID 27 search really did not offer any real clues on what to try other than updating my Intel R V- Gigabit Network Connection drivers which did not solve the problem

A:Event Viewer Warning - Source e1yexpress - Event ID 27

Well after trying everything google came up with to try, including updating drivers to the latest version, rolling drivers back to the default Win7 version, disabling SIPS and a few others things I decided to call Verizon and see what they had to say. As soon as I told Verizon Tech Support that my error code was "e1yexpress - Event ID is 27
Intel(R) 82567V-2 Gigabit Network Connection Link has been disconnected", they told me not our problem take your PC to a shop. I called back a couple of hours later and talked to a different person and this time I only said that I was getting the Event 1014 time out errors. They had me do a few things in a cmd prompt and then said we do not know, but we can send you a router, I said fine, I will try the router.

Well it has been over a week since installing the new router and no error codes at all so it was the router!

http://www.sevenforums.com/general-discussion/250403-event-viewer-warning-source-e1yexpress-event-id-27-a.html
Relevancy 64.93%

My Win 7 Pro x64 system just started acting up. When I select an event in the Event Viewer, the More Information: Event Log Online Help link doesn't open IE10. When I click on the link, the Event Viewer pop-up confirmation box open to confirm sending information across the internet, but when I click "Yes" the box goes away and I get a momentary indication from the cursor that the action is processing then nothing. It will not change the active IE10 page or open IE10.

Is there a solution with out a system restore?

Thanks in advance for your assistance.

Regards

A:Event Viewer Event Log Online Help Links don't function

I don't know much about this kind of stuff - but here is what I dug up using Microsoft's Process Monitor and Process Explorer.

The mmc app (event viewer) sends info to one of the svchost instances (netsvcs).

Svchost writes some info to the registry about a scheduled task and then runs that task.

This starts taskeng - which starts wscript.

Wscript runs a temporary VBS file that is supposed to send a URL to the operating system (shell).

The OS is supposed to open your default browser.

Here is the contents of the VBS file from my testing:

Code:
Set shell = createobject("wscript.shell")
Shell.run """C:\Users\username\AppData\Local\Temp\tmp78C0.url"""


You might try SFC /SCANNOW Command - System File Checker

And let's hope that some other forum member can suggest things that you should check.

http://www.sevenforums.com/general-discussion/304193-event-viewer-event-log-online-help-links-dont-function.html
Relevancy 64.93%

Every time I boot my laptop I get error message Event ID 10 in Event Viewer. The details are:

Event filter with query "SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA "Win32_Processor"AND TargetInstance.LoadPercentage > 99" could not be reactivated in namespace "//./root/CIMV2" because of error 0x80041003. Events cannot be delivered through this filter until the problem is corrected.

I do believe that the error message is nothing to be concerned about from what I have read when I googled it, but nothing I read tells you how to get rid of it. Does anone know how I can get rid of this so it does not show up in event viewer everytime I boot?

A:Event Viewer Error Message Event ID10 - How to get rid of it?

idahosurge,
Read through the link below...
Hope it helps with your problem.

Event ID 10 is logged in the Application log after you install Service Pack 1 for Windows 7 or Windows Server 2008 R2

http://www.sevenforums.com/bsod-help-support/195338-event-viewer-error-message-event-id10-how-get-rid.html
Relevancy 64.93%

I have noticed these in my event viewer appearing a lot and roughly around times when my computer decides to freeze up on me.

Event ID 7001, Service Control Manager
The Peer Networking Grouping service depends on the Peer Name Resolution Protocol service which failed to start because of the following error:
%%-2140993535

&

Event ID 7023, Service Control Manager
The Peer Name Resolution Protocol service terminated with the following error:
%%-2140993535

A:Event ID 7001 and 7023 Shows in Event Viewer a lot.

Just FYI - I usually ignore these errors when they show up.
BUT, if they're associated with freezes we'll need to have a deeper look.

Please post this info even though you're not reporting BSOD's: http://www.sevenforums.com/crashes-d...tructions.html

http://www.sevenforums.com/bsod-help-support/237125-event-id-7001-7023-shows-event-viewer-lot.html
Relevancy 64.5%

Briefly My old system hasn t been powered on for about a year Problem was the onboard video failed I think Recently replaced failed system-start following load: to or The boot-start 7026: drivers Amdk7 Event it with a video card from another system riva TNT and bought some memory system wouldn t boot determined that Event 7026: The following boot-start or system-start drivers failed to load: Amdk7 the memory was bad Now the system booted but win K wouldn t work No problem I have XP now After multiple error during the xp install I finally got through it only the computer will only boot in safe mode Initially thought it was a hardare conflict so I booted in safe mode with networking and systematically cleared all the yellow in device manager Still will not boot normally Checked event log got the following error Event The following boot-start or system-start drivers failed to load Amdk fips Searched the net found a M support about it http support microsoft com kbid couldn t find amdk sys but managed to update the driver over the net now its there yet I get the same error I did the regedit described but no folder called quot parameters quot Made one didn t work deleted the value added the key to my available folder didn t work I m at wits end I ve been working on this off and on for a month Can anyone help with this one nbsp

A:Event 7026: The following boot-start or system-start drivers failed to load: Amdk7

https://forums.techguy.org/threads/event-7026-the-following-boot-start-or-system-start-drivers-failed-to-load-amdk7.448950/
Relevancy 64.5%

Hello,

Has anyone ran into the Event ID in the Title?
(Event ID: 7026, Message: The Following boot-start or System-start Driver(s) failed to load: TMEBC)

The user is getting CHKDSK every time they boot up the machine and it fails within seconds of it starting.
I removed the Scheduled task under the AutoChk area in the Task Scheduler.

Anyone have anything on this driver or able to assist?

Zach

https://social.technet.microsoft.com/Forums/en-US/1d6be5bc-d8c7-4e71-81fd-eccd4b348180/event-id-7026-message-the-following-bootstart-or-systemstart-drivers-failed-to-load-tmebc?forum=w7itprogeneral
Relevancy 64.5%

Error is .

Windows could not start the WLAN AutoConfig services on Local Computer
Error 1114: A dynamic link library(DLL) initialization routine failed.

Need help.

http://www.vistax64.com/network-sharing/149467-unable-start-wlan-services.html
Relevancy 64.5%

Whenever I long on to my computer Ikeep getting a message poping up"unable to start bluetooth services".What is the problem and how do I get rid of the message.Your help would be much appreciated.
os vista

A:unable to start bluetooth services

Hello Dats and Welcome to TSF,

It might be that the Bluetooth unit is inproperly installed or that the drivers can not be called for. Lets uninstall the unit and reinstall it again.

Go to Start > Search.
Type "devmgmt.msc" without the quotes > Hit ENTER.
Find and mark the bluetooth unit > Rightclick > Uninstall > Confirm uninstall.

When that is done, go to the top of the device management, where your computername is listed(I.E "NAME-PC"). Rightclick that name > Scan for hardware changes. Windows will then reinstall the bluetooth device with the previous driver.

(You could also just uninstall the unit from the device manager > Reboot the system. Windows would then reinstall the device upton startup)

http://www.techsupportforum.com/forums/f217/unable-to-start-bluetooth-services-610178.html
Relevancy 63.64%

I am not able to connect to my Wireless Network When tried to connect it just shows 'Cannot connect 'I have the Intel WiFiLink adapter with the latest driver for Windows Enterprise services AutoConfig and WLAN start Unable EAP to bit installed The laptop doesn't have a wireless connection manager and I am trying Unable to start WLAN AutoConfig and EAP services to connect using the Windows Wireless Connection Manager I checked in Services and found that WLAN AutoConfig and Extensible Authentication Unable to start WLAN AutoConfig and EAP services Protocol services are not running When I tried to start WLAN AutoConfig service I get the following error Windows could not start the WLAN AutoConfig service on Local Computer Error The dependency service or group failed to start When I tried to start Extensible Authentication Protocol service I get this error Windows could not start the Extensible Authentication Protocol service on Local Computer Error The service did not respond to the start or control request in a timely manner I have found that Unable to start WLAN AutoConfig and EAP services all the dependent services for EAP are running And all the dependent services for WLAN AutoConfig are running except EAP service I have madly searched the internet for solution before posting here Any help is greatly appreciated

A:Unable to start WLAN AutoConfig and EAP services

 
Hi,
 
This issue can occur if the service is corrupted. Please perform the following steps to troubleshoot the issue.
 
1. Access the link below to download the EAP.txt file:
 
http://cid-6df3bca839e981ef.skydrive.live.com/self.aspx/.Public/EAP.txt ;
 
2. Rename the EAP.txt file to EAP.reg file.
 
3. Click Start, input "REGEDIT" (without quotation marks) in the open box and press Enter. Please click Yes.
 
4. Expand to Computer key, Click "File" menu and click "Export".
 
5. Please name the file as "RegBackup" (without quotation marks) and then save it to the C:\ drive as a backup.
 
Note: In case we need to undo the modification, we can double click this RegBackup.reg file to restore the registry key.
 
6. Double click the EAP.reg file and Click Yes to import it to the computer.
 
Then, please verify the following services again: Extensible Authentication Protocol, CNG Key Isolation
 
If the issue persists, you may perform an In-place Upgrade to repair the system.
 
1. Start the computer by using the current Operating System.
2. Insert the Windows 7 DVD in the computer's DVD drive.
3. Use one of the following procedures, as appropriate:
 
If Windows automatically detects the DVD, the Install now screen appears. Click Install now.
If Windows does not automatically detect the DVD, follow these steps:
 
a. Click the Start Button, type Drive:\setup.exe in the start search box and then click OK.
 
Note: Drive is the drive letter of the computer's DVD drive.
 
b. Click Install now.
 
4. When you reach the "Which type of installation do you want?" screen, click Upgrade to upgrade the current operating system to Windows 7.
 
Thanks,
Novak

https://social.technet.microsoft.com/Forums/en-US/f9b835f2-c2da-43b9-883f-2b2a157c3921/unable-to-start-wlan-autoconfig-and-eap-services?forum=w7itpronetworking
Relevancy 63.64%

Hi All,
I am new to this forum and If I am not supposed to ask this question here, kindly excuse me... I have a problem. I am not able to log in to Yahoo Messenger because it says that internet connection is down when it is up and running. I started all the relevant services - Appllication Layer Gateway, Remote Procedure Call etc restarted the system - yet no luck...
Kindly let me know if any such problems were resolved earlier..

Thanks,

http://www.techsupportforum.com/forums/f10/unable-to-start-any-of-the-live-update-services-166184.html
Relevancy 63.64%

A little background first I downloaded a file and started to install it when Defender caught the virus but didn't contain it So I downloaded Malwarebytes to scan and remove Defender to Unable Windows Re-Start Services the virus After I loaded Malwarebytes I noticed I wasn't getting anymore Windows Unable to Re-Start Windows Defender Services Defender definitions but I noticed the Windows Defender services were stopped and I figured Malwarebytes stopped it and that was the reason I wasn't getting anymore updates on Defender I uninstalled Malwarebytes but now I can't restart Windows Defender If I got to Control Unable to Re-Start Windows Defender Services Panel Unable to Re-Start Windows Defender Services then Security and Maintenance window Both buttons to turn on Defender are grayed out If I search for Windows Defender in the search window on the task bar This is the result I get And lastly if I go into Task Manager Services there are entries for Windows Defender both are stopped If I try to restart them this is the message I get So is there anything I can do to restart the app or does it require more drastic steps such as reload

A:Unable to Re-Start Windows Defender Services

Head over to Services and make sure windows defender service is on. Not sure if the virus could have altered any settings in there, but worth a look.

http://www.tenforums.com/antivirus-firewalls-system-security/3966-unable-re-start-windows-defender-services.html
Relevancy 63.64%

The computer cannot start the Windows Firewall Microsoft Security Essentials ActiveX installer Windows Update etc Services Unable to install certain anti-virus programs such as Avira because it says it requires the new Service Pack I ran Malwarebytes which was already on the computer but it came up with no threats Ran Roguekiller x and it found a few registry issues and an edited hosts file which were fixed But the vital Windows services start to Unable issue still remains DDS Unable to start vital Windows services Log DDS Ver - - - NTFS AMD Internet Explorer BrowserJavaVersion Run by LChubaty at on - - Microsoft Windows Home Premium GMT - AV Microsoft Security Essentials Disabled Updated EA - D C- DFB- - E E F F SP Windows Defender Disabled Updated D DDC A- F- fae- E -DA C ACF SP Microsoft Security Essentials Disabled Updated C BB - B - - A - B A B B Running Processes Unable to start vital Windows services C windows system lsm exe C windows system svchost exe -k DcomLaunch C windows system svchost exe -k RPCSS C windows system atiesrxx exe C windows System svchost exe -k LocalServiceNetworkRestricted C windows System svchost exe -k LocalSystemNetworkRestricted C windows system svchost exe -k netsvcs C windows system svchost exe -k LocalService C windows system atieclxx exe C windows system svchost exe -k NetworkService C windows system taskhost exe C windows System spoolsv exe C Program Files x Common Files Adobe ARM armsvc exe C windows System svchost exe -k LocalServiceNoNetwork C Program Files x Common Files Nuance dgnsvc exe C Program Files x Launch Manager dsiwmis exe C Program Files Acer Acer ePower Management ePowerSvc exe C Program Files x Acer Registration GREGsvc exe C Program Files x NewTech Infosystems Acer Backup Manager IScheduleSvc exe C Program Files x NewTech Infosystems NTI Backup Now SchedulerSvc exe C windows system svchost exe -k imgsvc C Program Files Acer Acer Updater UpdaterService exe C windows system Dwm exe C windows Explorer EXE C Program Files Acer Acer ePower Management ePowerTray exe C Program Files Synaptics SynTP SynTPEnh exe C Program Files Microsoft Security Client msseces exe C Program Files x Google Drive googledrivesync exe C windows system wbem unsecapp exe C windows system wbem wmiprvse exe C Program Files Synaptics SynTP SynTPHelper exe C Program Files Acer Acer ePower Management ePowerEvent exe C ProgramData FLEXnet Connect ISUSPM exe C Program Files x McAfee Security Scan SSScheduler exe C Program Files x Evernote Evernote EvernoteClipper exe C Program Files x NewTech Infosystems Acer Backup Manager BackupManagerTray exe C Program Files x EgisTec IPS PmmUpdate exe C Program Files x Common Files Adobe ARM AdobeARM exe C Program Files x Adobe Acrobat Acrobat acrotray exe C Program Files x Common Files Java Java Update jusched exe C Program Files x Google Drive googledrivesync exe C windows system SearchIndexer exe C Program Files Windows Media Player wmpnetwk exe C windows system svchost exe -k LocalServiceAndNoImpersonation C Program Files x EgisTec IPS EgisUpdate exe C Users LChubaty AppData Local Google Chrome Application chrome exe C Users LChubaty AppData Local Google Chrome Application chrome exe C Program Files x ATI Technologies ATI ACE Core-Static MOM exe C Program Files x ATI Technologies ATI ACE Core-Static CCC exe C Users LChubaty AppData Local Google Chrome Application chrome exe C Users LChubaty AppData Local Google Chrome Application chrome exe C windows system taskeng exe C windows system svchost exe -k defragsvc C windows system wbem wmiprvse exe C windows System cscript exe Pseudo HJT Report uStart Page hxxp www google com mWinlogon Userinit userinit exe BHO MSS Identifier E A AD- D - EB- D D- EF A - C Program Files x McAfee Security Scan McAfeeMSS IE dll BHO Adobe PDF Link Helper DF C-E AD- -A -FA C EBDC - C Program Files x Common Files Adobe Acrobat ActiveX AcroIEHelperShim dll BHO C C A-E - b - D - CECB - lt orphaned gt BHO Java Plug-In SSV Helper BB-D F - C-B EB-D... Read more

A:Unable to start vital Windows services

Hello, Welcome to BleepingComputer.I'm nasdaq and will be helping you.If you can please print this topic it will make it easier for you to follow the instructions and complete all of the necessary steps.===Please download ComboFix from any of the links below, and save it to your desktop. For information regarding this download, please visit this web page: http://www.bleepingcomputer.com/combofix/how-to-use-combofixLink 1Link 2IMPORTANT !!! Save ComboFix.exe to your Desktop1. Close any open browsers.2. Close/disable all anti virus and anti malware programs so they do not interfere with the running of ComboFix.3. Do not install any other programs until this if fixed.How to : Disable Anti-virus and Firewall...http://www.bleepingcomputer.com/forums/topic114351.htmlDouble click on ComboFix.exe and follow the prompts.When finished, it will produce a report for you.Please post the C:\ComboFix.txt Note: Do not mouse click ComboFix's window while it's running. That may cause it to stallNote: If you have difficulty properly disabling your protective programs, refer to this link --> http://www.bleepingcomputer.com/forums/topic114351.htmlNote: If after running ComboFix you get this error message "Illegal operation attempted on a registry key that has been marked for deletion." when attempting to run a program all you need to do is restart the computer to reset the registry.===Third party programs if not up to date can be the cause of infiltration an infection.Please run this security check for my review.Download Security Check by screen317 from here.Save it to your Desktop.Double click SecurityCheck.exe and follow the onscreen instructions inside of the black box.A Notepad document should open automatically called checkup.txt; please post the contents of that document.===Search and delete the AdWare, PUP (Potentially Unwanted Program) installed on your computer.Please download AdwCleaner by Xplode onto your Desktop.Close all open programs and internet browsers.Double click on AdwCleaner.exe to run the tool.Click on Delete tab follow the prompts.A log file will automatically open after the scan has finished.Please post the content of that log file with your next answer.You can find the log file at C:\AdwCleaner[Rn].txt (n is a number).Please paste the logs in your next reply DO NOT ATTACH THEM.Let me know what problem persists.

http://www.bleepingcomputer.com/forums/t/492875/unable-to-start-vital-windows-services/
Relevancy 63.64%

I recently cleaned most of a fairly large infection involving Vundo XP AntiVirus and a couple others Most of them attempted to download other viruses so it multiplied quickly So I don t know which one caused it exactly but it shut down the ability to start services for AV programs I tried to reinstall Windows Defender and PCTools Spyware The HiJackThis log probably won t show much The only remaining threat seems to be the Fvijaa exe process All other services start normally including those that make RPC calls PCTools will fail to run install in standard mode though Safe Mode works Defender will fail to install giving a error fails to services Anti-Virus to unable start start the service Any idea how to restore the services Anti-Virus services unable to start without a reinstall I m guessing it has to do with the dll linked to the services Anti-Virus services unable to start being tampered with Logfile of Trend Micro HijackThis v Scan saved at PM on Platform Windows XP SP WinNT Anti-Virus services unable to start MSIE Internet Explorer v Boot mode Normal Running processes C WINDOWS System smss exe C WINDOWS system winlogon exe C WINDOWS system services exe C WINDOWS system lsass exe C WINDOWS system nvsvc exe C WINDOWS system svchost exe C WINDOWS System svchost exe C WINDOWS system spoolsv exe C WINDOWS Explorer EXE C Program Files Intel Intel Matrix Storage Manager iaanotif exe C WINDOWS system RUNDLL EXE C WINDOWS system ctfmon exe C Program Files Common Files Apple Mobile Device Support bin AppleMobileDeviceService exe C WINDOWS system CTsvcCDA exe C WINDOWS eHome ehRecvr exe C WINDOWS eHome ehSched exe C Program Files Intel Intel Matrix Storage Manager iaantmon exe C Program Files Java jre bin jqs exe C WINDOWS system lkcitdl exe C WINDOWS system lkads exe C WINDOWS system lktsrv exe C WINDOWS system nisvcloc exe C WINDOWS system svchost exe C WINDOWS system dllhost exe C Program Files Mozilla Firefox firefox exe C WINDOWS system wuauclt exe C WINDOWS system mmc exe C WINDOWS Fvijaa exe C Program Files Trend Micro HijackThis HijackThis exe O - HKLM Run IAAnotif C Program Files Intel Intel Matrix Storage Manager iaanotif exe O - HKLM Run CTSysVol C Program Files Creative SBAudigy Surround Mixer CTSysVol exe r O - HKLM Run NvCplDaemon RUNDLL EXE C WINDOWS system NvCpl dll NvStartup O - HKLM Run NvMediaCenter RUNDLL EXE C WINDOWS system NvMcTray dll NvTaskbarInit O - HKCU Run Creative Detector quot C Program Files Creative MediaSource Detector CTDetect exe quot R O - HKCU Run ctfmon exe C WINDOWS system ctfmon exe O - Extra button no name - A B- - - AFE-EE C DA F - C Program Files Skype Toolbars Internet Explorer SkypeIEPlugin dll O - Extra Tools menuitem Skype add-on for Internet Explorer - A B- - - AFE-EE C DA F - C Program Files Skype Toolbars Internet Explorer SkypeIEPlugin dll O - Extra button Skype - BF - - EC - -D B E B - C Program Files Skype Toolbars Internet Explorer SkypeIEPlugin dll O - DPF E D -B - d-BC - AFFED E E System Requirements Lab - http www nvidia com content DriverDownload srl srl bin sysreqlab cab O - DPF - f - bb - d -fa d f a ab Installation Support - C Program Files Yahoo Common Yinsthelper dll O - DPF B F-D BF- -B -FDC F F E B CDownloadCtrl Object - http www fileplanet com fpdlmgr cabs FPDC cab O - DPF E A- D- EE - C-DC FA D FC MUWebControl Class - http update microsoft com microsoftupdate v V Controls en x client muweb site cab O - DPF C AEB - B A- E -AC - EE D B EB GameTap Web Updater - http archives gametap com static cab headless GameTapWebUpdater cab O - DPF CC D -CC - C- - F DBAC A ArmHelper Control - file C Program Files Monopoly Images armhelper ocx O - DPF D DC A- - E- - C A CRLDownloadWrapper Class - http drmlicense one microsoft com crlupdate en crlocx ocx O - Protocol skype com - FFC B - B - DFF- - C DD F D - C PROGRA COMMON Skype SKYPE DLL O - Service Apple Mobile Device - Apple Inc - C Program Files Common Files Apple Mobile Device Support bin AppleMobileDeviceService exe O - Service ... Read more

https://forums.techguy.org/threads/anti-virus-services-unable-to-start.909429/
Relevancy 63.64%

I keep an eye on the event viewer and a new event I haven't seen before has showed up. The event is under the application heading as information and the source is (ESENT). It reads as follows:

Event Type: Information
Event Source: ESENT
Event Category: General
Event ID: 100
Date: 8/16/2004
Time: 5:20:33 AM
User: N/A
Computer: ALPHA
Description:
wuauclt (1272) The database engine 5.01.2600.0000 started.

Everything is the same on the next three events except the discriptions which are as follows:

wuaueng.dll (1272) SUS20ClientDataStore: The database engine started a new instance (0).

wuaueng.dll (1272) SUS20ClientDataStore: The database engine stopped the instance (0).

wuauclt (1272) The database engine stopped.

This happens several times a day. Everything seams to be working properly but I very interested in what this data is trying to tell me.

Thanks
John
 

Relevancy 63.64%

Hi there,

It's my first time posting on this forum however this forum has helped me solve dozens of past issues so thanks

Ok so I've got an MSI GS40 notebook running Windows Home 64-bit. It's a great notebook and runs like a dream. I recently checked my Event Viewer and saw thousands of warnings. Basically the same warning every second. They're all Execution Service - Event ID: 1

I'm really not keen on a system restore or reformat. The hardware is pretty high-end and so it doesn't seem like anything has slowed down but I would like to resolve these crazy warnings.

Any help would be great...

http://www.tenforums.com/performance-maintenance/63802-event-viewer-thousands-unknown-event-id-1s.html
Relevancy 63.64%

Windows Home bit ASUS X LA Notebook What is going on here and what is the best for dealing with this The AppID seems to be designating RuntimeBroker but I have done everything so far to correct this error What am I missing Log Name System Source Microsoft-Windows-DistributedCOM Date PM Event ID Task Category None Level Error Keywords Classic User SYSTEM Computer DESKTOP-EOB C K Description The application-specific permission settings do not grant Local Activation permission for the COM Server application with CLSID D B C -BB - -A F-E B D and APPID CA EE -ACB - C -AFC -AB C to the user NT AUTHORITY SYSTEM SID S- - - from address LocalHost Using LRPC running in the application container Unavailable SID Unavailable This security permission can ID Event in Viewer... 10016 Event Error be modified using the Component Event Error ID 10016 in Event Viewer... Services administrative tool Event Xml lt Event xmlns quot http schemas microsoft com win events event quot gt lt System gt lt Provider Name quot Microsoft-Windows-DistributedCOM quot Guid quot B E -B AA- -BADC-B F A E quot EventSourceName quot DCOM quot gt lt EventID Qualifiers quot quot gt lt EventID gt lt Version gt lt Version gt lt Level gt lt Level gt lt Task gt lt Task gt lt Opcode gt lt Opcode gt lt Keywords gt x lt Keywords gt lt TimeCreated SystemTime quot - - T Z quot gt lt EventRecordID gt lt EventRecordID Event Error ID 10016 in Event Viewer... gt lt Correlation gt lt Execution ProcessID quot quot ThreadID quot quot gt lt Channel gt System lt Event Error ID 10016 in Event Viewer... Channel gt lt Computer gt DESKTOP-EOB C K lt Computer gt lt Security UserID quot S- - - quot gt lt System gt lt EventData gt lt Data Name quot param quot gt application-specific lt Data gt lt Data Name quot param quot gt Local lt Data gt lt Data Name quot param quot gt Activation lt Data gt lt Data Name quot param quot gt D B C -BB - -A F-E B D lt Data gt lt Data Name quot param quot gt CA EE -ACB - C -AFC -AB C lt Data gt lt Data Name quot param quot gt NT AUTHORITY lt Data gt lt Data Name quot param quot gt SYSTEM lt Data gt lt Data Name quot param quot gt S- - - lt Data gt lt Data Name quot param quot gt LocalHost Using LRPC lt Data gt lt Data Name quot param quot gt Unavailable lt Data gt lt Data Name quot param quot gt Unavailable lt Data gt lt EventData gt lt Event gt

http://www.tenforums.com/performance-maintenance/55284-event-error-id-10016-event-viewer.html
Relevancy 63.64%

Hi, I have a strange thing going on with Event 1 in the Even Viewer.
Event 1 signifies that the computer awoke from sleep (standby/hibernation), see attachment below for illustrations. It shows the time (circled in blue) which is also the time it shows in the list with all the other events, and that is the actual time the event occurred. But if you look on top of the box (circled in red) you see weird times listed over there, in fact at the time that the event take place (9:08 in this case) the times listed above didn't arrive yet. Why are those future times there, and how does the computer write something form the past into the future? I find that very strange. Do you perhaps know how that could happen?

Thank you, I appreciate it!
 

Relevancy 63.64%

Hi Guys Girls I keep getting this error every minutes anybody managed to solve this Log Name System Source Microsoft-Windows-DistributedCOM Date Event ID Task Category None Level Error Keywords Classic User DALE-PC Dale Computer Dale-PC Description The server AA A C - B B- F E- D - C AEC did not register with DCOM within the required timeout Event Xml lt Event xmlns quot http schemas microsoft com win events event quot gt lt System gt lt Provider Name quot Microsoft-Windows-DistributedCOM quot Guid quot B E -B AA- -BADC-B F A E quot EventSourceName quot DCOM quot gt lt EventID Qualifiers quot quot gt lt EventID gt lt Version gt lt Version gt lt Level gt lt Level gt lt Task gt lt Task gt lt Opcode gt lt Opcode gt lt Keywords gt x lt Keywords gt lt TimeCreated SystemTime quot - - T Z quot gt lt EventRecordID gt lt EventRecordID gt lt Correlation gt lt Execution ProcessID quot quot ThreadID quot quot gt lt Channel gt System lt Channel gt lt Computer gt Dale-PC lt Computer gt lt Security UserID quot S- - - - - - - quot gt lt System gt lt EventData gt lt Data Name quot param quot gt AA A C - B B- Event 10010 keeps Viewer Event ID showing F E- D - C AEC lt Data gt lt EventData gt lt Event gt

A:Event Viewer keeps showing Event ID 10010

Hi,

It's a synchronization error. The server trying to sync to a device that is no longer present or was just never there.

Try to disable the following service: Portable Device Enumerator Service (WIN+R > Services.msc) and see if that helps.

Cheers,

http://www.tenforums.com/performance-maintenance/68384-event-viewer-keeps-showing-event-id-10010-a.html
Relevancy 63.64%

Greetings I have a large number of the following errors in my event viewer Level Source Event ID Event sptd Error ID4 Viewer Event Task Category Error spdt--- ------ --- none General-- Driver detected an internal error in its data structures for Details-- XML View-- - lt Event xmlns quot http schemas microsoft com win events event quot gt - lt System gt lt Provider Name quot sptd quot gt lt EventID Qualifiers quot quot gt lt EventID gt lt Level gt lt Level gt lt Task gt lt Task gt lt Keywords gt x lt Keywords gt lt TimeCreated SystemTime quot - - T Z quot gt lt EventRecordID gt lt EventRecordID gt lt Channel gt System lt Channel gt lt Computer gt adm-PC lt Computer gt lt Security gt lt System gt - lt EventData gt lt Data gt lt Binary gt C lt Binary gt lt EventData gt lt Event gt Here is the Friendly View-- -System -Provider Name sptd -EventID Qualifiers Level Task Keywords x -TimeCreated SystemTime - - T Z EventRecordID ChannelSystemComputeradm-PCSecurity -EventData C Binary data In Words C In Bytes C S You can see exactly the same error posted in the case of Windows Xp by Karlosio of Scotland on August at the following techguy org forum post -- http forums techguy org windows-xp -sptd-errors-event-viewer html Tech Support Guy System Info Utility version OS Version Microsoft Windows Ultimate Service Pack bit Processor Intel R Core TM i CPU GHz Intel Family Model Stepping Error sptd Event ID4 Event Viewer Processor Count RAM Mb Graphics Card NVIDIA GeForce GTX Mb Hard Drives C Total - MB Free - MB D Total - MB Free - MB E Total - MB Free - MB F Total - MB Free - MB G Total - MB Free - MB H Total Error sptd Event ID4 Event Viewer - MB Free - MB I Total - MB Free - MB J Total - MB Free - MB K Total - MB Free - MB L Total - MB Free - MB M Total - MB Free - MB N Total - MB Free - MB O Total - MB Free - MB Motherboard ASUSTeK Computer INC P T DELUXE V Rev xx Antivirus AVG Anti-Virus Free Edition Updated and Enabled nbsp

https://forums.techguy.org/threads/error-sptd-event-id4-event-viewer.1004077/
Relevancy 63.64%

Dell Dimension years old warning, Event 51 disk, Viewer: event Intel Pentium Mhz Phoenix BIOS never updated WinXP SP all updates AVG Pro Brother MFC cn Dell FP LCD Spybot MS AntiSpyware Beta Trying to save time for everyone I ll just say that I looked at Event Viewer today I ve looked at it infrequently and never could understand what I saw but today there was something relatively Event Viewer: warning, disk, event 51 new and scary Type Warning Date Time AM Source disk Category None Event User N A Computer JohnandCheryl Further info under help and support said an error was detected during a paging file operation The word quot disk quot scared me so I checked the entire Event Viewer and found of these errors from Aug through Sep If this event was cataloged earlier I don t know because the Event Viewer only goes back to Aug I checked System Restore for Aug and found a couple of things an accidental MS quot update quot to NVIDIA GeForce MX driver -- but we ve had the driver for a long time now The screws up the display resolution big time I reinstalled the resolution is fine but I m wondering if this could have something to do with the Event warning Also on that same date something called Software Distribution Service is listed three times and I don t know why I don t even know what it is I ve researched the web and can t find anything that seems to apply -- other than potential for a hard drive crash Just what I don t need Meanwhile the entire system is working extremely well fast and smooth no glitches or twitches that I can detect -- and I m thoroughly baffled Can anyone help me with this Thanks so much nbsp

https://forums.techguy.org/threads/event-viewer-warning-disk-event-51.395886/
Relevancy 63.64%

Howdy Gents And Event Event Viewer? ESENT showing in Merry Christmas Have a question I was poking around in event viewer and came across a new entry It's called ESENT and is being logged anywere between - times a day I've researched this and it seams to be tied to Windows XP SP and the Windows Update Client Database because it's using the wuaueng dll and wuauclt exe files I do not have service pack installed but I'm updated on ALL fixs so I'm thinking this is a problem with the just the Update Client After backtracking my Install history it began appearing in my logs after I ESENT Event showing in Event Viewer? installed the quot Cumlative Security Update For Internet Explorer Service Pack KB MS - I'm thinking Windows Update Installed the new Client software at that time as that update didn't have anything to do with this My questions are Has anyone seen this on an XP PRo system just using SP Why is it being logged I Have autoupdate disabled

http://www.techsupportforum.com/forums/f10/esent-event-showing-in-event-viewer-29946.html
Relevancy 63.64%

Hello First time ever I am posting a thread like this never thought I would have to Anyway the issue is described below Randomly my computer decides to shutdown and restart unexpectedly There is no blue screen 6008 Event ID Event [Troubleshooting] - Viewer it just shut downs and restarts immediately I can't really relate the issue to a certain task or running program it's all so random Event Viewer - Event ID 6008 [Troubleshooting] It can occur while browsing the web watching a film or playing a game I have been fixing around with computers for quite some time now and this is my second build The components are listed below PSU Corsair Professional Series HX CPU Intel Core i K MHz MB Gigabyte GA-P A-UD -B RAM Corsair Dominator x GB MHz DDR GPU EVGA GTX SuperClocked MB SLi HDD Corsair Force Series GB HDD Corsair Force Series GB OS Windows Ultimate Bit Retail I finished this system about five months ago and it started to act like this since weeks back The system is working solid otherwise Due to the limited amount of space on the system drive at GB I have disabled System Restore I have AVG Internet Security installed along with Malwarebyte's Anti-Malware I have tried to update system drivers in order to restore the system stability which are USB Host Controllers SATA Controllers Realtek SFX Drivers Realtek LAN Drivers None of the above mentioned drivers seemed to solve my issue I have tried to disable Intels Azalia Codecs inBIOS but without success I haven't checked Safe Mode for stability The restarts seem to happen in different patterns For example the restart could occur just minutes after startup or an hour after startup At times the restarts can occur just after another sudden restart At best the computer can be running for - hours or even days without unexpected shutdowns A lot of problems can be fixed but this Event ID is a real trick to me I have searched Google for useful answers but they're all blurry Could be hardware related could be a simple setting could even require a Windows reinstall I am pasting the Event Viewers XML Information about the last restart for the experts - lt Event xmlns quot http schemas microsoft com win events event quot gt lt System gt lt Provider Name gt quot EventLog quot gt lt EventID Qualifiers gt quot quot gt lt EventID gt lt Level gt lt Level gt lt Task gt lt Task gt lt Keywords gt x lt Keywords gt lt TimeCreated SystemTime gt quot - - T Z quot gt lt EventRecordID gt lt EventRecordID gt lt Channel gt System lt Channel gt lt Computer gt Noll a lt Computer gt lt Security gt lt System gt lt EventData gt lt Data gt lt Data gt lt Data gt - - lt Data gt lt Data gt lt Data gt lt Data gt lt Data gt lt Data gt lt Data gt lt Binary gt DC DC F C C lt Binary gt lt EventData gt lt Event gt Regarding the dumpfile I have choosed to dump a small dump file at kB I have made sure the computer does not automatically restart upon error codes The correct attachments should be attatched below I would gladly assist with more useful information if needed Thanks Michael

A:Event Viewer - Event ID 6008 [Troubleshooting]

Event ID 6008 entries indicate that there was an unexpected shutdown.
Critical thermal event indicates that the problem is related to one of your hardware components not functioning properly that is triggering the computer to shut down.

Check if your CPU is overheating. Also check if the heat sink or fan is functioning properly. If the laptop is under warranty, get in touch with the manufacturer.

If it isn?t, get a good cleaning done for the fan and heat sink with compressed air only if you?re comfortable. Otherwise seek the help of a technician.

In addition, since power supply plays a major role in cooling the computer?s innards check if PSU (Power Supply Unit) is functioning properly.

Other thermal events (depending on your board) can be from the graphics card, bridge chipsets or hard drives.

You may opt to check for third party Thermal Event Monitor software so that you have a brief idea as in what?s triggering the critical thermal event.

Note: Microsoft cannot guarantee that any problems resulting from the use of Third Party Software can be solved. Using Third Party Software is at your own risk.

http://www.sevenforums.com/bsod-help-support/222469-event-viewer-event-id-6008-troubleshooting.html