Windows Support Forum

# Sp 3 Installation Failure Error Code: 0x80200010

Q: Sp 3 Installation Failure Error Code: 0x80200010

Concerning Title Windows XP Service Pack KB Originated Update History Installation Failure Error Code x Starting with Download does not start after you accept the EULA on the Windows Update Web siteI followed instruction to register the files To resolve this problem you must reregister the following files Msscript ocx Dispex dll Vbscript dll Scrrun dll by entering gt start gt Error Failure Installation Sp Code: 0x80200010 3 run gt regsvr msscript ocx This resulted in a completion or success message I m not sure wether this was a register or re-register however please can anyone tell me what I am suppose to do next as per http support microsoft com kb en-us Click Start click Control Panel click Appearance and Themes click Folder Options and then click the File Types tab In the Sp 3 Installation Failure Error Code: 0x80200010 Registered File Types list click the JS extension click Advanced and then click Edit In the Application to perform action box type the following command depending on your operating system For Microsoft Windows XP type C WINDOWS System WScript exe quot quot In I did not find the JS extension I did find JSScript Script File Is this the same one If so does this action apply to all four files above

Relevancy 100%
Preferred Solution: Sp 3 Installation Failure Error Code: 0x80200010

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

A: Sp 3 Installation Failure Error Code: 0x80200010

I found this; Rename (or just delete) the SoftwareDistribution folder and see if it helps. You can use the procedure described here: http://v5.windowsupdate.microsoft.com/v5co...id=21&ln=en Note that a side effect of renaming or deleting the SoftwareDistribution folder is that you lose your Windows Update History listing (not critical). (later on, you can just delete the renamed SoftwareDistribution folder) http://www.eggheadcafe.com/forumarchives/w...ost24597399.aspBut can not make it out, and can not see the relationship with the, Microsoft Online Assisted Support ?Anyone who can co-relate this in explanation I will be glad to hear from !

http://www.bleepingcomputer.com/forums/t/165199/sp-3-installation-failure-error-code-0x80200010/
Relevancy 12.9%

I have a three month old Dell Dimension GHZ P Gig Ram and a gig SATA Hard Drive When I got the computer I used the files and transfer PC Relocator utility And had in Error system drives did hard Message: disk find Setup not your installed any a bunch of unwanted extras that came with it I m having a Satellite Internet system installed and they wanted a clean install of windows XP So I opened the owner s manual and got out the reinstallation disk and the problems began By the way Dell tech support s only response has been to say gee that s not right and would send a tech sometime after Christmas Anyway heres step by step what I did I boot to the Dell reinstallation disk Error Message: Setup did not find any hard disk drives installed in your system The windows setup screen appears and loads files The next screen says welcome to setup and offers three options -to setup XP press enters To repair XP press R to exit without installing XP press F I press enter and the following message comes up Setup did not find any hard disk installed in your computer Make sure any hard disk drives are powered on and properly connected And any disk related configuration is correct ect Press F to quit It dose this if I try repair also Dell had me check the connections to the HD and Motherboard They re good And debug the hard drive No luck Everything worked fine until I put in the reinstallation disk Any help would be welcome nbsp

A:Error Message: Setup did not find any hard disk drives installed in your system

During Setup, it will ask you if you need any extra drivers such as SCSI (or SATA in your case). If so, press F6. Now you are in trouble, because SATA drivers come on a floppy and new(er) Dells don't have a floppy anymore. Borrow a floppy-drive from another PC and install that in your Dell.
Setting up with the Dell disks, I'm not sure if they are RESTORE-disks or full XP-disks.
That may cause another problem.

http://www.techspot.com/community/topics/error-message-setup-did-not-find-any-hard-disk-drives-installed-in-your-system.18329/
Relevancy 13.33%

Hello everyone,
One fine evening while watching a movie, my laptop stopped responding and in frustration I switched off the laptop by holding the power button long enough to turn off. Next Morning it showed a blue screen and a message to recover my windows, which I failed to do and by the afternoon this message showed up. Detection Error on HDD0 (main HDD) and hence forth I've been unable to install windows from a USB drive since ( and I suppose) it is not able to read my HDD. I do not care about my data at all, I just want my laptop up and running. If I can have the data back it will be perfect otherwise I don't mind not getting my data back. I know for a fact that my Hard disk is fine because I went into command prompt, diskpart , and list disk, and saw the status of HDD as healthy, this is after the error (detection error on HDD). SO my question is: Why this error? IS there a problem in the motherboard? Why the error shows once and then doesn't show the next time and then comes up again.

A:2100: Detection Error on HDD0 (Main HDD); Lenovo Thinkpad Yoga

The error might be bad sectors, but I'm not sure. if my guessing is correct, you might have to get a new drive to replace. also you need to reinstall OS

Relevancy 13.76%

Hello,

I bought a R9 270X by XFX. My current specs are:

CPU: AMD A10 7800k (Standard Clock Speeds, Graphics Disabled)
RAM: 4GB (2 sticks, both working)
Motherboard: FM2, Gigabyte
PSU: 500 watt 80+ Cert Silver
HDD: 500GB WD Blue

So the issue is that the R9 card consistenly crashes out of all games no matter if I uninstall the drivers or reinstall them. I have tried removing the drivers through catalyst control center and through application based tools (DisplayDriverUninstaller). Once I uninstall and reinstall, it works, until the computer is restarted and then rinse and repeat.

Is this the card saying it is dying? If so it is a weird way of graphics card dying.

http://www.techspot.com/community/topics/r9-270x-doa-or-user-error.209138/
Relevancy 22.79%

When booting up my computer, directly after auto-detecting SATA devices, my computer regularly gives me an error that alternately reads "Primary Hard Disk Failure, Press F1 to Resume..." or "Secondary Hard Disk Failure, Press F1 to Resume..." Sometimes the word "Slave" or "Master" are there after the words "Primary" or "Secondary" in there as well. While the content of the message varies, the result is usually the same: The startup process lags after auto-detecting the drives, then gives me this error.

I have three SATA hard drives and a DVD drive plugged in to my mb via SATA. When no HDD are detached, but I have boot media in the DVD drive, the computer starts up quickly and normally, with no errors. When any or all of the HDDs are plugged in, I receive the above error. I borrowed a HDD from my roommate, plugged it in, attempted to boot up and still received the error. None of the HDD are bad, and it would be a pretty big coincidence for all four I've tested to fail at once.

What could the problem be?

A:Primary Hard Disk Failure, Press F1 to Resume

UPDATE:

When I plug in just one or two of the HDD + the DVD drive, the computer boots fine. When I plug in three HDD + DVD drive, failure! Do I perhaps need to upgrade my power supply?

http://www.techspot.com/community/topics/primary-hard-disk-failure-press-f1-to-resume.208761/
Relevancy 13.76%

Hi, I am having a problem with my external hard drive not working. My laptop cannot read the drive, it does not display properly in my computer and when I try to click on it it freezes and the message appears "Drive is not accessible, parameters are incorrect". I used it about three weeks ago and it was fine so I don't know what happened. I always make sure to safely remove it and am careful not to damage it. The light still still turns on when plugged in and I can hear it trying to work.

I really want to keep the files as they are from my previous laptop which died and do not have them stored anywhere else. My fault I know, but I had thought external hard drives were more reliable and I do not like the idea of cloud storage. Because of this I am hesitant to try CHKDSK. Is there anything else I can do to recover the files or fix the drive? If I take it to a computer technician would they be able to do it?

http://www.techspot.com/community/topics/external-hdd-error-not-accessible-parameters-incorrect.208079/
Relevancy 14.19%

Ok, I have the question of `em all: at every game I try to unzip it gives me the crc error. I tried reinstalleing my windows, tested my RAMs(noo error found)reinstalled the drivers, nothing. I have the next output: amd a8 6600k 4gb ram r7 260X video card and gigabyte f2a55m-s1 motherboard. what should I do? also tried 7zip and latest version of winrar, and I get the memory managemet error

A:CRC error

Seems a bit odd you are unzipping games.. Do they unzip on other computers fine? If so, run a hard drive diagnostics utility like SeaTools. If you can't test on other computers, what are you trying to unzip specifically, games shouldn't be zipped...

http://www.techspot.com/community/topics/crc-error.207554/
Relevancy 14.19%

I've never seen this before. It just popped up a bit ago on my W7 pc.

What does it mean? I hope its nothing bad.

A:RAID error?

I found this in a google search http://h30434.www3.hp.com/t5/Desktop-Hardware/AMD-RAIDXpert-Warning-Errors/td-p/342708

I've known this pc has RAID on it because everytime it reboots/boots up it shows it. I've had this pc for two years this month & just hoping nothing bad is happening.

http://www.techspot.com/community/topics/raid-error.207317/
Relevancy 13.76%

My toshiba will not get on the Internet Google will come up and search but everytime it says Internet error

A:Laptop Internet error

Need specific; try looking in the cmd-> enter eventvwr.msc

http://www.techspot.com/community/topics/laptop-internet-error.207423/
Relevancy 13.33%

We just bought a monitor U2713H direct from Dell.

When we click on Factory Reset, the monitor doesn?t go back to Factory default setting.

-In particular, Contrast/Brightness: 0.
In terms of Color Setting, Input color Format: None.
Preset Modes: Movie

-Then we click on Reset Color Settings, Input Color Format: RGB, Preset Modes: Standard.

-When click on Factory Reset again, Contrast/Brightness and Color Setting come back to the same condition as above (Contrast/Brightness are 0, Input color Format: None.
Preset Modes: Movie).

-After we try to set up Contrast/Brightness to 50/50, we shut down desktop or turn off the power button on the monitor. Then we turn on computer or turn on power button on the monitor, Contrast/Brightness are 0, Input Color Format: None, Preset Modes: Movie.

-In summary, all menu settings can?t be saved by the monitor and Factory Reset doesn?t work.

Any idea would be highly appreciated. Thank you a lot in advance

A:Dell monitor U2713H error: settings can't be saved

What I would suggest is ask Dell if they would warenty it new it should have one and Dell should honor it. I would say they will but I have not done business with them in years, although the monitor I am using right now is one of theirs and is many years old.

http://www.techspot.com/community/topics/dell-monitor-u2713h-error-settings-cant-be-saved.207032/
Relevancy 21.93%

A:New hardware + Win7 installation = headaches

Update: Wired connection issue is fixed. I have to (sheepishly) admit that I completely forgot to install the router via the CD that came with it. The lousy wireless performance is still a problem, though, as well as the hard drive/partition issues.

Relevancy 13.33%

Printer Problems in Windows XP sp3
Dell Personal Printer all in one A940
After trying to speed up an older computer running Windows XP
I may have cut off the Print Spooler (or it was already off ?)
I went back to Services dialog box & selected Print Spooler
I clicked the "Start" link at left of service list & got a message tgat said
"could not start print spooler service on local computer error 1068 The dependency service or group failed to start."
Printer is still not working can anyone help?

A:Could not start print spooler service on local computer error 1068

On Win/7 the dependencies are

HTTP

Remote Procedure Call (RPC)
DCOM Server Process Launcher
RPC Endpoint Mapper
Manually start each on and set to AUTOSTART as you go.
If one fails, then that is the root problem.

http://www.techspot.com/community/topics/could-not-start-print-spooler-service-on-local-computer-error-1068.206839/
Relevancy 21.5%

My old hard drive was a sata drive but it failed so I had an old ide 80gb barracuda 7200rpm drive that I wanted to install windows on but when I load the windows installation and goto custom it wont show my drive. My bios detects it its just windows . I tried using diskpart and even formating the drive to ntfs witha complete whip but still no luck .

A:Windows installation can't detect my ide hard drive?

Perhaps the hard drive's jumper setting is incorrect. Are there any other IDE devices connected on the same cable as the HDD?

http://www.techspot.com/community/topics/windows-installation-cant-detect-my-ide-hard-drive.192208/
Relevancy 13.76%

Hi,
I am having a problem with my DVD hardware. Every time I put a disc in and open it in Explorer I get I a popup asking me to burn a disc (image file attached). I've tried going through all kinds of settings but nothing works. I am running Windows 8.1. Any help would be appreciated.

Thanks,

Verity

A:Burn Disc Error

That's autoplay setting for blank disk media.

http://www.techspot.com/community/topics/burn-disc-error.205054/
Relevancy 21.93%

I have an old Acer Aspire m3100 desktop and the case to it is broken, I have another case for it but I do not have the installation manual to show me how to reconnect all of the connections from this other case. How can I get or find the diagram showing how to make all connections to this motherboard. I'm trying to restore this computer for my grandson? any help would be appreciated, I've tried contacting Acer but they won't help unless the computer is under warranty and their third-party support doesn't do hardware issues?? I also downloaded a manual from online but it doesn't show the right info.

A:Motherboard Installation manual

Check this is the right motherboard.

http://www.gigabyte.com/products/product-page.aspx?pid=2500#ov

Case wiring is pretty standard in most cases (no pun intended). Any details you have about the case your switching to would be helpful.

Motherboards mostly have the names of sockets screen printed next to them.

http://www.techspot.com/community/topics/motherboard-installation-manual.205022/
Relevancy 13.76%

I decided to upgrade my old hard drive to a new hard drive. When I tried to install Windows Xp on the hard drive it wouldn't let me. I have a Dell Xps 400 bought back in 2006.
The new HD is a WE 1tb. The error codes comes when I try to install windows xp on the hd. It says

I got a blue screen error after clicking enter at the screen where there is no partition found:
Check to be sure you have adequate diskspace. If a driver is identified in the stop message, disable the driver or check with manufacturer for driver updates. Try changing video adaptors.

Check with your hardware vendor for any bios updates. Disable bios memory options such as caching or shadowing. If you need to use safe mode to remove or disable components. Restart your computer, press f8 to select advanced startup options, and select safe mode.

Technical information:

http://www.techspot.com/community/topics/error-on-trying-to-install-new-sata-hd.204857/
Relevancy 13.76%

Hello all,
Windows 7 doesn't recognize my SSD drive. When I go to disk management, it shows a message to initialize it (image no.1) but when I press OK to do that, one another message appears and says: Data error cyclic redundancy check (image no.2). My computer windows doesn't show that drive and also when I went to cmd->diskpart, again it didn't show that disk to use of chkdsk /f command. How to solve the problem please?

A:Data error cyclic redundancy check ssd

I could to revive that disk in diskpart using PartedMagic in boot. I've uploaded a new image from that. The remained problem here is that I can't delete it there.

http://www.techspot.com/community/topics/data-error-cyclic-redundancy-check-ssd.204783/
Relevancy 23.22%

Hi, I have a Verbatim Store n' go ex hard drive which used to work perfectly with usb 3.0 and 2.0. A few weeks ago it stopped working with 2.0 and now not even with 3.0. When I plug it in the hard disk starts to rotate and lights up normally, but is never shown on the drive list. The computer doesn't even do the beep sound when a usb device is connected. I tried on 2 different pc's but they show no result.

Any kind of help is greatly appreciated

http://www.techspot.com/community/topics/external-hard-drive-failure.204788/
Relevancy 13.76%

I am running Windows 8.1. After restarts, the laptop screen would be blank, yet the computer would load. If I hooked up a 2nd monitor, it would show the desktop on that screen but laptop screen blank.

Now when I try to type on that computer (I'm currently on a different computer) the typing of the keys is all off (none of the letters actually type what they are supposed to and some open up random windows and command prompts)

I am wondering if this is a virus. Currently running Malwarebytes. I did a system restore earlier and the problem wasn't solved.

A:Blank Screen error and typing issues

Could be a virus, but could also mean the motherboard is faulty. If still in warranty, RTM.

Does the laptop have a bootable CD reader? If so, then download and make a bootdisk of a small linux (e.g. puppy linux). Booting off that will virtually prove if the motherboard is faulty or not.

http://www.techspot.com/community/topics/blank-screen-error-and-typing-issues.204596/
Relevancy 23.65%

Greetings I ve moved to another country where electricity is not stable and goes high low or even disconnect power failure many times a day So i brought an old UPS i have discovery and connected it to the outlet and connected the PC and the LCD screen to it Sometimes when the electricity goes high down the UPS seems can t regulate fast enough or when the electricity disconnect the UPS can t change to battery mode fast enough so the PC restarts I though the problem is from the UPS so i bought failure during My despite restarts UPS PC power a new one iXA PRO which also has a built in AVR with wide input range of - Vac wide range of input frequency output short circuit protection overload protection and the transfer time My PC restarts during power failure despite UPS is ms I connected the PC and the LCD screen My PC restarts during power failure despite UPS to the new UPS and connected my modem and an external hard to the old one Surprisingly when the electricity went high low or when it disconnected the modem did not reset but my PC restarted which means that the old UPS is still working and the problem is from the PC itself I use My PC restarts during power failure despite UPS a very god power supply Blue Storm - wat so any idea what the problem could be Note When the electricity goes high low or disconnect the PC doesn t actually restart it just half turned off i mean i can still hear the fans rolling but there is nothing on the screen and i have to turn it off then on Note Sometimes when electricity goes high low or disconnect the PC keeps working normally Thanx in advance nbsp

A:My PC restarts during power failure despite UPS

My guess is your power supply in your PC uses active PFC (Power Factor Control) while your uninterruptible power supply is likely rated for a passive PFC.

http://www.techspot.com/community/topics/my-pc-restarts-during-power-failure-despite-ups.159403/
Relevancy 23.22%

Hello,

Old Dell computer running Windows XP that was never backed up and I am trying to recover files and photos. I get NTLDR is missing when I boot. I've used Testdisk/Photorec to try to recover my data but when going through the recovered data it seems to be all system files that I know nothing about. I used Ubuntu on the Dell to run Testdisk. I also hooked up the hard disk to my laptop with a hard disk adapter and got the same results.I also ran a NTLDR boot disk but ended up with the same NTLDR is missing message. I dont have a XP recovery disk. Anybody that has had this issue please help!

A:NTLDR is missing. Hard Drive Failure.

Trobles86 said:

I also hooked up the hard disk to my laptop with a hard disk adapter and got the same results.Click to expand...

If you have access to another PC or laptop then you can connect the hard drive in to that machine and get the files you wanted to recover from your hard drive in there.

http://www.techspot.com/community/topics/ntldr-is-missing-hard-drive-failure.203104/
Relevancy 23.22%

I have a HDTV consisting of a GA-P55A-UD7 and an Intel I7 processor and W7x64. It is hooked up to a Panasonic P50V10 plasma TV via HDMI. Over the last several months, I have gone through THREE video cards. The last one lasted only three days. I doubt my luck can be that bad regarding video cards so it must be something else. I have never heard of a monitor blowing video cards via an HDMI interface but anything is possible I guess. Any suggestions?
Thanks!

http://www.techspot.com/community/topics/repeated-video-card-failure.202803/
Relevancy 12.04%

Hi I have an older PC which I gave to my mum It originally ran Vista but I bought and installed Windows Ultimate around weeks ago after it had been inactive for months It was running great but a couple of weeks ago it just started hanging for no real reason Also at startup it would say that the computer had not been shut down properly even if it had This was only when it was switched off at the wall not after checksum defaults loaded" replaced error battery after - "cmos a restart or when the PC was left plugged in and switched on She only "cmos checksum error - defaults loaded" after battery replaced uses the PC to look at You Tube and some webcams from her grandkids and that s it she s not very computer literate Initially I left Windows repair to run overnight but when I looked at it the following morning it was still in the repair screen so I assume it had hung I spoke to a local repair shop and they suggested I test the RAM test the hard drive and replace the CMOS battery The RAM and hard drive checks went without any errors and after I replaced the battery the hanging stopped I played with the computer all evening and shut it down as normal and switched it off at the wall Next day I thought I would start it up just to check it and I was faced with a quot cmos checksum error - defaults loaded quot message I thought that was strange but maybe the battery was dead so I swapped it over with one from my perfectly working desktop to try it out and my desktop worked fine but after shutting down my mum s one it had the same problem when power was pulled So battery was ruled out Incidentally I will say that I reset the BIOS date and time every time I was faced with the error following up with a save and exit It worked fine until I unplugged the computer I then moved on to the BIOS and set it back to default and the same again After this opened the case and used the jumpers to reset the BIOS to default again but no difference My mum will not leave it switched on at the wall constantly in case it self-combusts same with her washing machine TV lamps etc otherwise I would just do that and ignore it Is there anything else someone can suggest that I try System Shop bought by Mesh Motherboard is an ASUS PSN-E SLI gb Ram - samsung gb hard drive - ASUS Thanks for any help nbsp

A:"cmos checksum error - defaults loaded" after battery replaced

I must add that the PC is the same as when I bought it new from the shop, except for adding a Creative Labs sound card (approx 2012) and installing Windows 7 (around 6 weeks ago). All Windows updates are downloaded and installed.

Relevancy 14.19%

I recently receive a pop out error message everytime I start up my laptop. Can anyone please advise? Thank you! The error message is below.

There was a problem starting
C:\Users\XXX\AppData\Roaming\newnext.me\nengine.dll
The specified module could not be found

http://www.techspot.com/community/topics/rundll-error.201803/
Relevancy 22.36%

A:"Logon failure: unknown user name or bad password” even with correct credentials

I experienced a similar problem when I was trying to network my 8.1 machine the host network. As you say the host PC can see and connect to all of the machines, but not the other way around. Not sure if it is the same in your situation but I found that Microsoft's idea of network sharing on the Windows 8 class of OS differs greatly from previous OS's in that you can connect to it from an external host, but when trying to do the other way around it doesn't "see" the PC in question due to differing network sharing protocols included in the OS.

Anyone feel free to correct me if I am wrong, I am speaking only from what happened with my network.

Relevancy 14.19%

Hello,

When I play BF4 I get a direct X error after awhile claiming that it cannot allocate any more memory and that I should use a GPU with at least 512 MB RAM.

I have tried to search around but cannot find a solve really.

Some people advise to disable the Intel integrated Graphics in the device manager but no one can confirm if it works or not so I am hesitant to try it...

I have updated drivers for Dx and the GPU without resolve, also tried reinstalling them.

It has not happened for any other games so far but the only game that really demands any memory I play is BF4 ... I will try with Crysis 3 or something similar demanding to see if the error happens there too.

A:DirectX error for AMD R9 290 Tri x 4GB

Obzoleet said:

Hello,

When I play BF4 I get a direct X error after awhile claiming that it cannot allocate any more memory and that I should use a GPU with at least 512 MB RAM.

I have tried to search around but cannot find a solve really.

Some people advise to disable the Intel integrated Graphics in the device manager but no one can confirm if it works or not so I am hesitant to try it...

I have updated drivers for Dx and the GPU without resolve, also tried reinstalling them.

It has not happened for any other games so far but the only game that really demands any memory I play is BF4 ... I will try with Crysis 3 or something similar demanding to see if the error happens there too.

Anyone have any advices?Click to expand...

Well in all technicality the game should not be defaulting to the integrated unless you have your monitor hooked up to the on board connectors so I would not worry about that. If its reading as a memory problem in BF4 then it maybe a problem with BF4 drivers. I have not played in a few days on my 290X setup but an update was just downloaded I noticed a day or two ago.

Have you tried changing over from directX to Mantle and seeing if that helps or vice versa?

Also try the latest Beta 14.2 because it makes things alot more stable than 14.1 was in terms of Mantle at least.

See what happens after trying this, the Intel Integrated should not be interfering so I would not worry about that.

http://www.techspot.com/community/topics/directx-error-for-amd-r9-290-tri-x-4gb.200757/
Relevancy 13.76%

A:NICs not working Windows 7 Error 31, this one is weird

"so the problem is related to windows and follows the drive"... Re-install Windows on this drive. Error 31 relates to a bad driver that may be reflected in the device manager

http://www.techspot.com/community/topics/nics-not-working-windows-7-error-31-this-one-is-weird.200795/
Relevancy 14.19%

The web server in my IIS has the Default web site stopped. When I hit start, I get an error message
there was an error while performing this operation.
Details:
the process cannot accdess the file because it is being used by another process. (Exception from HRESULT: 0X80070020)
The site bindings are:
:*:57772 (http),*:443 (https), 808:*(net.tcp), *(net.pipe), locathost (net.msmq), localhost (msmqformatname)
Can anyone point out what is wrong?

A:IIS error

That error is saying
1) one program (process) as a file open
2) another attempted to modify or delete it

A most common case is when a process is running and the current directory is \temp\foo\bar

and some process is attempting to delete foo

http://www.techspot.com/community/topics/iis-error.200665/
Relevancy 13.76%

When I am accessing wifi network I get dns failed error message. what is the problem? pls help

A:DNS failed error in WiFi network

Can you connect using a wired connection?
Get a command prompt and enter
ipconfig /all >myTCP.txt​then open that file, copy the contents and paste into your follow-up

http://www.techspot.com/community/topics/dns-failed-error-in-wifi-network.200577/
Relevancy 14.19%

I am also getting a bad image error it pops up on six or 7 start ups ive run mbam disk clean up disk defrag scan disk but its still there. ive looked over many posts and tried to follow others instructions but im still missing something

Jarrow, what are your computers specs?

Relevancy 13.76%

My graphic card showing error on Pc starting
When I start the computer it restarting with this error vt-x1550pci256

this error showing on top left on screen what I do Now ?

ps : sorry for my bad english

Relevancy 23.22%

I have a problem with a batch of Dell optiplex 980's, for some reason the Main boards fail at a alarming rate.

According to Dell it is the memory controller that fails.

Error Lights 1,3,4 are on nothing on screen, power led solid blue about 10 error beeps!

Dell tech replaced the main boards and all is fine for a while but same problem persists.

Also according to Dell level 6 tech, it could be over heating, I had some fun proving them wrong, two PC's sealed in a box , hammering them, Temp between 85 Celsius - 90 Celsius in the sealed enclosure, optical drive started melting, cooled the PC's for a day and powered back on, no problems!!

Does any one out there maybe have a issue similar to this on the optiplex 980, main board failures?

A:Motherboard failure issue on Dell Optiplex 980

Dell Optiplex 980 Lights 134 on no screen

Yes I have exactly the same problem. Turned PC on this morning lights 134 on plus blue power light but no screen at all. Still under warranty, phoning dell in the morning - I will keep you posted

http://www.techspot.com/community/topics/motherboard-failure-issue-on-dell-optiplex-980.169232/
Relevancy 22.36%

Hey, today i just got a new 4gb memory stick to add to my computer, currently i have 2 2GB DDR3 1333 RAM sticks.(These were both Kingston Memory Sticks) I then added a 4gb DDR3 1333 Ram stick (Crosshair) to the motherboard and made sure they were firmly placed in and it was all fine, I then turn on the computer and find that the motherboard starts beeping once then two beeps after and the Screen is blank, and my mouse & keyboard aren't responding. My current OS is Windows 7 64 Bit, so i shouldn't have a problem installing new ram to my system...
I'm not sure if this is a problem with 2 different brands of sticks or what.. but the fans are running for my Graphics card (I don't have onboard graphics available)

Specs
AMD 1055t X6
ASUS M5A99XEVO Motherboard
Kingston

Any help anyone? Thanks
-Joe

A:Problems with RAM installation

The motherboard does not like that 4GB module. Have you tried the 4GB by itself? If the 4GB module won't run the computer you'll have to stick with 2GB modules. How many memory slots are on the motherboard? ASUS motherboards are notorious for being very picky about memory

http://www.techspot.com/community/topics/problems-with-ram-installation.179890/
Relevancy 13.33%

How serious is this? I'm running on a Dell laptop with a Intel(R) ICH9M-E/M SATA AHCI Controller.

It is saying that I should back up all of my important files because of possible hard drive failure.

A:Hard drive is reporting a Smart Event error message

It telling you your hard drive is on its way out. You can try running a check disk and see if that helps. But to be on the safe side you should back up your personal files.

http://www.techspot.com/community/topics/hard-drive-is-reporting-a-smart-event-error-message.199432/
Relevancy 13.76%

Hi All,

I have made a new rig and wanted to transfer the video/music from old IDE hard drive.

I have tried two IDE to USB convertors and when I try to access my old hard driver from My Computer I receive the error "Format Disk"

I have restarted my PC and now it doesn't even detect it!

A:Format Disk Error with IDE to USB Converter

Sounds like the partition table is messed up on the IDE hdd. The data is still there, but windows just cannot figure out how to "read" that drive. More than likely you'll need a 3rd party application to view the data on the drive and copy it accordingly. I use UFS explorer in the shop to recover data from customers' hdds http://www.ufsexplorer.com/download_std.php There are many other 3rd party data recovery programs/application out there, just google it & I'm sure you'll find one that fits your needs.

Post back, Hope this helps!!

http://www.techspot.com/community/topics/format-disk-error-with-ide-to-usb-converter.198116/
Relevancy 24.08%

Hello I have owned my computer for years for my birthday However in May I began having some issues When I would power on the computer the display would not turn on After a few restarts the display began to work again The display was connected to my Gigabyte GeForce GTX TI I tried the monitor on another computer and it worked fine This issue stopped for some time until one month ago The issue reoccurred and would not correct itself after multiple reboots I removed the graphics card and plugged the display into the motherboard and it worked fine I then cleaned my computer RAM slots and graphics card port After this I retried my graphics card and it has been working fine up until this point Last night I unplugged the peripherals USB keyboard mouse and headphones then plugged them back in turned my computer off and went to bed I did this because they were generating too much light motherboard failure Possible when I Possible motherboard failure was sleeping When I awoke this morning I turned my computer on but my headphones began crackling and the sound cut out occasionally I then tried another port and got a Windows message stating that there was a malfunction I have tried other devices in this port since and they work fine possible headphones broken - yet to try on another computer I powered off my computer then back on to find my graphics card no longer worked same situation as described above I have ensured the GFX card is plugged in correctly Here are my specs Motherboard ASUS P H -MLE CPU Intel Core i - GHz GFX card Gigabyte GeForce GTX TI OS Windows Home Premium RAM gig I don t mind if it is the GFX card I am looking at another one for my birthday but I don t have the money to buy both a motherboard AND a GFX card Please help me Jessica nbsp

http://www.techspot.com/community/topics/possible-motherboard-failure.199227/
Relevancy 12.04%

Hey,
I woke up on May 10th 2013 & when it started up my laptop I saw this.

I was a bit scared, but I decided to run the following programs:
Mbam (AV)
DSKCHK
Disk cleanup
Disk defragmenter
Scan disk (SCR-scanow)
AVG tuneup
AVG (AV)
MSE (AV)
Restore point.
I do not know what happened, but I have posted on several other forums, but no answer.
Thanks,
Danawesome.

A:Repeated "bad image" error (think it's something to do w/laptop)

Did you fix this?

Relevancy 22.36%

Hi All,
Firstly thanks for reading, I wanted to build a new system some time ago but circumstances have pretty much stopped that for now so I have decided to just update a few things in my old work horse starting with the hard drive, I have with your advice on an old thread purchased a Samsung SSD 840 along with W7 Pro 64bit. I assume I just unplug my existing drives and plug this one into sata 1 and install the OS ?? or do I, is there a procedure I need to be aware of first, I.e. bios settings etc ?
Thanks for any advice as I am a total noob with SSD's, it came with a disk also, do I need this ?
Cheers,
Lee.

A:First ssd installation procedure ?

You've got it right. Just make sure to enable AHCI mode in the BIOS.

And don't ever defrag it haha.

http://www.techspot.com/community/topics/first-ssd-installation-procedure.198432/
Relevancy 24.08%

I recently had my cpu fan fail, I woke up to a bios message indicating CPU fan error, and of course when I check it, it was just kinda twitching around. I'm not sure how long the computer was powered up with that error message, but I suspect it was around 5-6 hours. Windows was running beforehand. But since replacing the fan I've noticed the performance has dropped a little bit and the system isn't as stable as it used to be, but its not consistent. I have small issues such as short and random freezing for a couple seconds, and the computer doesn't wake from sleep mode. These didn't start happening until after the cpu fan failure and I was wondering how likely is it that there is some cpu damage?

A:CPU damage after fan failure?

You are kind of lucky That it still works. You may want to remove the CPU and apply some new thermal compound. This may help you out with the problem. Plus I am sure some one here might have a few suggestion.

http://www.techspot.com/community/topics/cpu-damage-after-fan-failure.194161/
Relevancy 23.22%

Recently I was doing a research about a memory update for my G - LA Notebook and in many websites including the Netbook User s Manual I found that this Notebook could be upgraded up to Gb of memory So Upgrading Notebook Failure G42-365LA HP Memory I bought two RAM memories of Gb each one SoDIMM DDR PC - MHz according to researched specifications But the thing is that when I installed them I couldn t enter into the OS it sent me to the Windows Error Recovery window directly and whichever option I choose it reboots and it keeps doing that Well I tried installing just one memory alone and the result is different it came up with the BSOD giving me different errors each time I reboot the Netbook These errors are BAD POOL HEADER PFN LIST CORRUPT IRQL NOT LESS OR EQUAL I ve tried to reinstall the OS with memories installed but the result is the same My Notebook is a HP G - LA Windows Home Premium x Service Pack Intel Core i CPU M GHz I don t know if I was cheated by the manufacturer website and or the others websites that s why I need your help P S When I installed just one memory module I can see The Windows intro logo but just for two seconds or so And I tried to install quot Ubuntu desktop amd x quot with just one Gb memory module inserted and everything was good but it wasn t with the two cards installed nbsp

A:Upgrading Memory Failure HP G42-365LA Notebook

One of the stick of ram maybe bad. Try them each one at a time.

Relevancy 13.33%

Hi,

I have Windows XP SP3 installed on my desktop and suddenly my LAN/NIC is not receiving and sending packets from my network. The DHCP Client Services and TcpIP services wont start it gives error from the above.

From the device manager of non-plug and play drivers, the tcpip protocol driver, ip network address translator and netbios over tcpip has exclamation point. When I uninstall the drivers and start the services the connection is established but when I shutdown/restart the PC it will came back again the issue.

AFD is running

Below drivers are present in system32\drivers folder.

afd.sys
tcpip.sys
netbt.sys
Any ideas?

A:DHCP Client Service Won't Start - Error 1068

Hello,

I update the system and the LAN driver but still the issue exist.

I copy the netbt.sys from a working machine and paste that to the non-working machine. Same problem.

Is there other way resolving this issue aside from repairing or fresh install of the OS?

http://www.techspot.com/community/topics/dhcp-client-service-wont-start-error-1068.197233/
Relevancy 13.76%

Hello all!
I regularly have the folllowing line appear when my bios starts up -CMOS checksum error defaults loaded. I am having a problem about CMOS Checksum Error, every time I turn on the computer it will wait about 30 secs before the first beep. Then the CMOS checksum error occur. Some days ago I had changed my battery after that this problem occurs. Please help me. I have a snapshots of the same problem.You can check here: http://wealthamplifier.in/images/cmos1

A:CMOS Checksum Error - Defaults Loaded

Could you have installed the battery backwards by mistake? Even though the battery is new, it could be defective.

Relevancy 18.06%

Not sure if I'm in the right section

Just unpluged my m audio delta 2496 card to do some other repairs. After reconnecting and powering up I have no sound in Cubase ( In device setup selecting m audio delta driver I get the following Error message "audio engine error could not activate asio driver m audio delta" Now even windows system sounds don't work. Have tried re-installing 2496 driver....no go. Any suggestions would be welcome.

A:Error message "audio engine error could not activate asio driver m audio delta"

List any Problem devices

Make sure devices are connected and powered on
Click Start->Run, enter: msinfo32. Click the + sign next to Components to expand it
Click Problem Devices. Anything appear?
If yes, click on it, Ctrl-A to select all, Ctrl-C to copy it, Ctrl-V to paste into next post
On the other hand, if no devices are listed, tell me so
Generate and attach a DirectX report

Click Start->Run, enter dxdiag and click OK
===> If you?re running 32 bit Windows, dxdiag will launch on its own
===> If you?re running 64 bit Windows, you?ll see 64-bit DxDiag. Click it to launch the 64-bit version of dxdiag
Notice progress in lower left window corner
When done, click Save Information button and save as a text file to your Desktop
Click the Upload a File button to upload and attach the file to your next TechSpot post

http://www.techspot.com/community/topics/error-message-audio-engine-error-could-not-activate-asio-driver-m-audio-delta.197151/
Relevancy 23.22%

A:Hard Drive close to failure?

Why is it 47C? What are the SMART errors causing it to say 'caution'?

http://www.techspot.com/community/topics/hard-drive-close-to-failure.196307/
Relevancy 14.19%

I have to new hp laptops same type and specs but for some reason one of them gets a dns error and the other doesnt why?

A:DNS Error

Compare the output of IPCONFIG /ALL for the two machines; suspect the failing one is not accessing the DHCP properly . . .

http://www.techspot.com/community/topics/dns-error.196646/
Relevancy 14.19%

I tried to format my laptop today but I cant. "It said that my pc needs to be repaired" and "the application or operating system couldn't be loaded because a required file is missing or contains errors." What should I do then???

A:Error formatting PC

"What should I do then???"... The built-in restore feature is corrupt, so you may have to get a Windows install disc. The hard drive may also be bad

http://www.techspot.com/community/topics/error-formatting-pc.196528/
Relevancy 13.76%

lt lt RESOLVED gt gt For some reason whenever I try to run the file benchmark on my WD Blue TB or WD Black TB on HDTune Pro it always immediately returns a screen saying quot I O Error Test aborted quot Normally I would understand if this was happening if these drives were HDTune on gives drives I/O very test and new aborts Error old or had any indication that they are dying in some way However both drives have been purchased within the last months and the Blue drive was purchased only four HDTune gives I/O Error and aborts test on very new drives months ago They are each filled to approximately - capacity at the moment with this being the highest capacity the Blue has ever reached while the Black drive at one point hit before I reshuffled some files I haven t noticed any other issues with the drives at all except that HDTune s regular benchmark seems to say that the Blue drive is slightly faster than the Black which clearly shouldn t be the case HDTune s own drive status program shows no SMART issues in any of my drives either Does anyone know what could be causing this or how I could fix it Also I m not sure if this is relevant but my motherboard is currently set to run its SATA ports in quot RAID Mode quot instead of AHCI mode I HDTune gives I/O Error and aborts test on very new drives m not sure if that would matter but I don t currently have a RAID array this setting is just from a previous array that I used to have and now I m afraid that if I change the setting my drives might not boot anymore nbsp

A:HDTune gives I/O Error and aborts test on very new drives

Never mind, I figured it out. Problem was being caused by my drives being assigned as the A: drive and B: drive (Windows 8 allows this, and my slight OCD has always tormented me at not being able to use them for hard drives previous to this, so naturally I jumped on the opportunity to assign those letters). Anyway I reassigned to J: and K: drives just for the purpose of testing and all is now well!

http://www.techspot.com/community/topics/hdtune-gives-i-o-error-and-aborts-test-on-very-new-drives.196324/
Relevancy 23.22%

While transportation, probably my Harddisk must have moved or something, now I cant access it.
I have a Western Digital 1TB HD, and a Western Digital 500 GB HD.
Here's an image explaining whats going on! Can anyone help me with this?

A:PXE-E61: Media test failure, check cable

The message

pxe-61: media failureClick to expand...

is telling you that

the CD has nothing mounted which is bootable
the HD has nothing that is bootable
so it tries to boot using the NIC interface and it too has failed
You need to investigate the MBR and the C:\ partition for validity

http://www.techspot.com/community/topics/pxe-e61-media-test-failure-check-cable.196241/
Relevancy 14.19%

FYI: For those dependent upon MSN.COM, today the website certificate is no longer valid,
as shown in the attached JPG.

Your A/V program may respond differently, but Avast! found the error and offers two solutions:
1) PUNT, ie abandon the access
2) accept the cert and make an exception for this error

http://www.techspot.com/community/topics/msn-com-certificate-error.196061/
Relevancy 13.76%

A:Hard Drive Error After using Disk Drill

I only use WD drives here. WD Passports sometimes they don't work. What I do is this.
Place one in a ziplock bag and stick it into the freezer for 3 hrs or longer.
Thaw-it or use-it while it comes to life while you connect to a USB source like a PC
Most of the time the Passport will continue to work again. It all depends on the condition of it.

Clicking or clunking means the HDD is going bad.
In the pass others would say to use a screw driver handle and hit the drive.
But I always use the freezing method and it works enough to recover the data.
If the HDD is too far gone then nope not going to work.

http://www.techspot.com/community/topics/hard-drive-error-after-using-disk-drill.195888/
Relevancy 13.76%

Hi all my brother has a pc at home that he didnt want anymore so he put it in some black bags and I was taking it to the charity shop so they could sell it but the bag split at top of stairs and pc went tumberling down when I looked at it all the metal brackets had come loose from where u can put cards in and the gpu card came out to I put it all back propaly had couple of errors that I sorted but power abit dodgy when switching on. but the main problem is message comes up in task bar saying usb not recognised after plugging anything in any of the ports checked device manager and nothing wrong in there please help ... only 2 was not working before but now none work.. thanks in advance

http://www.techspot.com/community/topics/usb-not-recognised-message-error.195740/
Relevancy 13.76%

Hi all,
Can som1 help me?
I have a asus p5n-d mobo, that keeps giving the same error at start up " Cmoc checksum error - Defaults loaded". Ive updated the bios file from 0601 to 0801 and also changed the battery but I keep getting the same message.

Ive tried to reset the bios with the mobo cd but that aren't no help either.
If their arent anything else I can do, im thinking of getting a budget socket 1155 mobo with sli, could som1 recommended a mobo.

Thanks

A:Asus mobo Bios error?

Clear CMOS And Update Bios

http://www.techspot.com/community/topics/asus-mobo-bios-error.195357/
Relevancy 21.93%

Hi,
Any help would be great.. I have just started a fresh copy of widows xp and during the installation setup my keyboard has stopped working... Got through entering the key but with 33 minutes remaining and stuck at the screen ( personalize your software ) thing have gone bad..I have no keyboard function and can only use a mouse when plugged in... Oh forgot to say its a Acer Aspire 3000 laptop.. Thanks in Advance

http://www.techspot.com/community/topics/keyboard-stop-work-on-xp-installation.194217/
Relevancy 22.36%

A:Toshiba Satellite A305-S6898 - Shuts off during OS install after drive failure

Yeah, it may be a motherboard issue... Have you tried removing or resetting the CMOS battery?

http://www.techspot.com/community/topics/toshiba-satellite-a305-s6898-shuts-off-during-os-install-after-drive-failure.193323/
Relevancy 14.19%

This is my first post and hope I am doing it right, if this is the wrong place to post...I apologize.
quite often when opening a web site I get the error "Error 105 (net::ERR_NAME_NOT_RESOLVED): Unable to resolve the server's DNS address."
If I refresh the page usually I am able to open it. I am using chrome.

Thank You

A:DNS Look up fail error

Try this:
Go to the start menu and type in CMD-->Right click on CMD, and press "Run as Administrator"-->type this in exactly: ipconfig /flushdns

Tell me if this works out.

http://www.techspot.com/community/topics/dns-look-up-fail-error.193748/
Relevancy 13.76%

Everything on the network was set up fine with sharing between all the computers and it seemed like as time went on the windows computer encountered more and more problems One of the xp computers suddenly required a password to access the windows computer Windows suddenly couldn t access any of the other computers but you could still push files to it from the other ones But now I cant push any files to the windows computer or Between other Networking computers Error Windows and 8 all access any of the windows or xp computers files from the windows comp I get an error message saying Network Error Windows cannot access insertnamehere insertdrivehere You do not have permission to access insertnamehere insertdrivehere Contact your network administrator to request access I get this error message through both windows and and xp Networking Error Between Windows 8 and all other computers gives a cannot access error But I can see the drives I wish to access and the computers themselves I just cannot get into the drives even though all my permissions seem to be set properly If anyone can help it would be appreciated nbsp

A:Networking Error Between Windows 8 and all other computers

First it is a big time security hole to allow shared access directly to a drive

Windows cannot access \\insertnamehere\insertdrivehereClick to expand...

Sharing should be to a directory such as

\\systemName\publicFolder or
\\systemName\personalDocuments
Sharing has two major components:

Hopefully your XP is SP3 which has the LLTP service necessary for Win/{7&8}. If you have XP SP1 or 2, then find the LLTP update for it.

Before we go crazy, you mentioned

any of the other computersClick to expand...

so verify that all the other systems can share with each other (ie ignore Win/8) in both directions A can share with B and conversely. This will ensure the systems are configured correctly AND that the firewall is not a problem.

http://www.techspot.com/community/topics/networking-error-between-windows-8-and-all-other-computers.192500/
Relevancy 13.76%

Hellow guys again ,, hello the best website ever !!!
I jus wanna ask about something ,, Earlier I mentioned something about upgrading my processor to core 2 duo ,, now ive done that but when ever I start my computer ,, this msg shows up !
""" 1801 - microcode update Error
Missing or invalid processor microcode update. please contact hewlett-packard company for a new microcode update to support the new processor stepping """
Any help ?
HP compaq dx7300 microtower is my pc and Intel core 2 duo E4500 @2.20GHz is the new processor.

A:Microcode update Error ?

Have you tried contacting HP concerning it?

http://www.techspot.com/community/topics/microcode-update-error.191974/
Relevancy 13.76%

I have a asus a8n delexe sli which gaves the above error when I do alt f2 on post to enter the flash utility. I was driven to reinstall bios or upgrade it because I am getting freezing; reboot issues; missing drivers; unrecognised hardware issues etc. I have swapped out drives, video cards, reinstalled OS and even swapped PSU to no avail. So has my motherboard just had it?
I folllowed asus instructions and copied the bios to a floppy disk and tried to flash from that. Although I copied all three files in the downloaded zip so I presume it would select the exe file automatically. I will download again. Should it work if I copied to a blank CD? I presume the bios would automatically pull the exe from any device besides the hard drive? I get this error with or without the floppy inserted?

A:BIOS image file check sum error

Did you finally get this solved?

http://www.techspot.com/community/topics/bios-image-file-check-sum-error.190931/
Relevancy 13.76%

I have a Dell Studio 1737 Windows Vista Home 64 Service Pack 2. All of my drivers are up to date and I have the most recent BIOS.

I get this error message in my event viewer a couple of time an hour:

Source: ACPI
Event ID: 13

: The embedded controller (EC) did not respond within the specified timeout period. This may indicate that there is an error in the EC hardware or firmware or that the BIOS is accessing the EC incorrectly. You should check with your computer manufacturer for an upgraded BIOS. In some situations, this error may cause the computer to function incorrectly.

Also, when my computer is unplugged from the AC and running on battery power the system lags a lot and after about 15 minutes its turns off without warning.

I feel like this is all connected. Any advice?

Thank you!

A:ACPI error Event ID 13

This could be caused by a failing hard drive

http://www.techspot.com/community/topics/acpi-error-event-id-13.190645/
Relevancy 13.33%

I have a HP LaserJet Earlier this week I was using my laptop with a phone and an external hard drive both connected to the laptop HP power printer 2430 since error surge will USB LaserJet print not through USB connectors However when I connected the HP LaserJet using a printer cable with HP LaserJet 2430 printer will not print since USB power surge error a USB connector I received a message that said USB Power Surge Error or something similar Since then I have not been able to print I bought a new printer cable and it still does not work I ve been able to use the USB port on the laptop by connecting other items and they work fine so that s not the problem I am able to use the Menu button on the Printer to print out the Printer Info such as configuration page usage page etc However I can not get the Printer to work via a Printer Cable I keep receiving an error that says This document failed to print Is it possible the port which accepts the cable on the printer is damaged My family uses this printer on a daily basis Any assistance with this issue will be greatly appreciated Thanks Rachel nbsp

A:HP LaserJet 2430 printer will not print since USB power surge error

I forgot to add that the printer previously worked using this USB Printer Cable for years prior to this.

I'm still looking for help on this. If anyone has any knowledge regarding this, PLEASE let me know.
Thanks!

http://www.techspot.com/community/topics/hp-laserjet-2430-printer-will-not-print-since-usb-power-surge-error.189947/
Relevancy 13.76%

I keep getting DNS errors when trying to use the internet on an iMac on my network. The DNS errors sort of come and go. RIght now it's fine, but 5 minutes ago it wasn't. It keeps happening. Now that I think of it, this iMac sometimes also has issues connecting to the internet. One second it's working, then suddenly browsing the internet just times out. Again, every other computer on the network would work fine though.

I'm behind a wrouter that's connected to a modem. How can I begin to figure out what's the issue?

A:DNS error on one computer in network

Which OS X are you using? Try flushing the DNS cache: https://support.apple.com/kb/HT5343

http://www.techspot.com/community/topics/dns-error-on-one-computer-in-network.191162/
Relevancy 13.76%

Hey Just signed up to hopefully find Answers Here comes the crazy Ok a few days ago My computer would not load ANY Websites in Any of the Browsers I couldn t even connect to my router which seems VERY strange Luckily I had my laptop right next to me however this was working perfectly fine It had no problems establishing a connection So That led me to believe I may have a faulty Ethernet Cable after testing it via different Computers and Laptop it was obvious it wasn t the Cable So I could only come to the conclussion I might of had a DNS Error somewhere So I changed the DNS adress to OpenDNS However this also did not fix the problem I have tried using a specific IP Unexplainable error network and this doesn t fix it either So In a Final effort to find out what was wrong I disabled my AntiVirus AVG and still it isn t fixing the problem I know that my router itselfs works as I can download perfectly fine on this computer and Apps such as Steam work perfectly Its just connecting to Websites Which my laptop can do I am With SKY I am at my limit I have no Unexplainable network error clue what is doing this Everyone I talked to has no idea Even my University Computer Lecture is baffled All I know is that My computer hates me PS The only solution to fix this is a reboot I have tried various Anti virus and malware detectors They find nothing nbsp

A:Unexplainable network error

What OS are you running?

http://www.techspot.com/community/topics/unexplainable-network-error.190526/
Relevancy 13.76%

My computer has computer error screen like this the picture I attach and it keeps on coming back after I restart my computer. sometimes it will start normally and then I viewed the event viewer there are a lot of errors, criticals, warning and etc. what shall I do? I don't even know how to fix this please help me thanks

A:My computer has an error screen

Lol. What's that? A photo of your monitor?

If yes, monitor could be dying. Or graphics card...

http://www.techspot.com/community/topics/my-computer-has-an-error-screen.190154/
Relevancy 22.36%

Need to replace r29 & r30 resistors that were burnt beyond recognition, but have had no success in locating schematics or color code. Found a picture of the board online but to small to identify bands. Any help would be appreciated!

A:Altec Lansing ACS621 resistor color code

Resister codes

b - black = 1
b - brown = 2
r - red = 3
o - orange = 4
y - yellow = 5
g - green= 6
b - blue = 7
v - violet = 8
g - green = 9
w - white = 0
see http://en.wikipedia.org/wiki/Electronic_color_code

http://www.techspot.com/community/topics/altec-lansing-acs621-resistor-color-code.190330/
Relevancy 32.25%

Ok here s the history of the problem I have GB Hard drive quot Samsung sp c quot and I am using it since two years with my old desktop system with this S M A R T error at the startup BIOS TWO YEARS BACK I think there are some bad sectors involved at the last part of the HDD space There were partitions initially I e C D E amp F The problem started with partition #83" attribute "1720-SMART failure failing? drive detects imminent hard failed: ... HDD error F with following issues Always took so long copying files into F System got stuck up when some file s folder s from F drive were opened and then automatic restart That time ran CHKDSK on F drive but in the middle of scanning it always restarted the PC automatically Sometimes system restarted when I was copying some HDD error "1720-SMART hard drive detects imminent failure attribute failed: #83" ... failing? random data in the F partition Whenever this restart thing happened at the start up it displayed that there is no primary hard drive detected Then eventually it came back live after - attempts always I also deleted the Partition F and then recreated the partition but same problems persisted YEAR BACK Due to above issues HDD error "1720-SMART hard drive detects imminent failure attribute failed: #83" ... failing? I left the partition F as it was and used others like C D amp E but an year before the partition E started to do things same way F was doing and at that point F was not accessible with error popping The disk is not formatted Do you want to format it now I formatted the partition F and ran following HDD tools afterwards Partition Table Doctor HDD Regenerator Surface tests for C D E was fine but when it started scanning the HDD somewhere in F partition area these tools messed up with something took so long stuck at sectors for long time without repairing it MONTHS BACK I came to know that there are some serious issues in the HDD sectors inside the last GB part of HDD error "1720-SMART hard drive detects imminent failure attribute failed: #83" ... failing? the hard disk I made partitions C D E F G The G partition was for GB space and I never opened this drive since I created it because this will cause same problem what the F was doing before NOW I don t have much issues with C D E amp F while operating them Don t use F too much to be at safe side But I feel that HDD is very slow overall and and every time I turn this system on I get quot -SMART Hard Drive detects imminent failure Attribute failed quot Wondering if it could be fixed or not and I know and understand that my hard disk was failing ever since and most of you guys will advice to back up and purchase a new one but I am still on to fix this one and as if there s any way to get it right up Many Thanks nbsp

A:HDD error "1720-SMART hard drive detects imminent failure attribute failed: #83" ... failing?

The fundamentals still apply:

for every partition ?X?
chkdsk ?X? /f /r​
The /R will remap bad sectors in an effort to avoid future I/o errors.

a} fix all partitions
b} get the SMART data and save it for reverence (it will not be reset to zero by chkdsk)
c} view the SMART data every day
d} look for increasing statistics

PLAN on getting a new HDD asap

http://www.techspot.com/community/topics/hdd-error-1720-smart-hard-drive-detects-imminent-failure-attribute-failed-83-failing.190152/
Relevancy 13.76%

I recently built a pc with a fx 6100 8gb ddr3 and a 7850 in a nzxt phantom 410. and I'm getting what I think are good temps my gpu reaches 50c in load, and the cpu says relatively cool but on speed fan it says the aes says it's like 90c. So what is this aes and do you think these temps are correct. I believe this could'nt be correct, because I have my fans at 100% and I would like to see what you guys think 2. Ill upload gpu-z cpu-z and speed fan diagnostics later today.

A:Weird temp error? (hopefully)

Do not use Speed fan to monitor temps. Use Core Temp or HWmonitor and then report back.

http://www.techspot.com/community/topics/weird-temp-error-hopefully.189984/
Relevancy 13.76%

New system just built a week ago:

Asus P8Z77-V Pro
i7 3770K
F3-12800CL9D-8GBSR2 DDR3-1600 8GB(4GB*2)KIT CL9 1.25V
GIGABYTE GTX670 2GB OC PCI-E WINDFORCE3X GV-N670OC-2GD
OCZ Vector 2.5" 128GB SSD Indilinx Barefoot3 HD1237 VTR1-25SAT3-128G
Windows 8
The problem is, every 2nd or 3rd time I boot up I get a message by that white flag on the bottom right with a red X on it saying 'restart your PC to repair drive error (Important).

I have attached two screenshots at the bottom showing the messages I get within windows, then a short video of what happens when it reboots.

A:Restart your PC to repair drive error (important)

I'm not familiar with SSDs. It is safe to run a check on it, and what software would you recommend?

http://www.techspot.com/community/topics/restart-your-pc-to-repair-drive-error-important.189187/
Relevancy 22.79%

I just updated my Asus Eee PC 1015PN from Windows starter to Windows ultimate. Everything seems fine except for my Network controller. It says there are no connections available and it doesn't look like it recognizes my network controller.

In Computer Management, under device manager, in Other Devices - the only thing listed is Network Controller with a yellow exclamation mark. When I double click on it, it says the manufacturer is unknown and the drivers for this device are not installed (Code 28). I tried to update the driver through the system but it doesn't find anything.

In Everest, Network, PCI/PnP Network, it lists Atheros AR8132 PCI-E Fast Ethernet Controller and Broadcom 802.11n Wireless Network Adapter. That is the only mention of my wireless adapter I could find.

Any help would be much appreciated. I can provide more info if need be. Thanks

A:Netbook not recognizing network controller - code 28

it lists Atheros AR8132 PCI-E Fast Ethernet Controller and Broadcom 802.11n Wireless Network Adapter.Click to expand...

It sounds like you should have 2 network controllers - one wired, the other wireless.

Are you saying it's just the wired Ethernet connector? or both not working? Did you try the ASUS web site? If one of the connectors is working, i think the ASUS site offers the option to detect your model and tell you drivers needed. Or look up your model manually on their site

http://www.techspot.com/community/topics/netbook-not-recognizing-network-controller-code-28.164478/
Relevancy 13.76%

Every time I start up my laptop, I get this window that pops up and it saids

<Error>
An error has occurred.
ERROR : F3-F100-0004
An error has occurred.
Please press [OK] to turn off the computer.

That is all I get every time I turn it on.
It is a Toshiba Windows 7

-Shamu

A:Error F3-F100-0004

Are you seeing the bios screen before this error appears, if so start tapping the F8 key from the instant that you power on. See if it will run in safe mode.

How old is the PC?

Were you attempting to use the recovery options before this happened? If so read this: http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=194865

Do you have a Recovery disc or a Windows 7 disc?

http://www.techspot.com/community/topics/error-f3-f100-0004.162440/
Relevancy 22.36%

So I bought a new CPU installation problems CPU an AMD Phenom II x socket AM absolutely not AM which I read was compatible with my AM socket GA-MA X-UD P a Gigabyte brand board So I tried installing it and when it booted up it got to the BIOS boot screen CPU installation problems I think its called a Post screen and it either sits there or restarts itself in perpetuity I let it sit there doing that for about minutes to see what the problem is and it seems that particular CPU was only compatible after a BIOS update So I throw the old CPU back in download atBios and the update install put the new CPU back in but it hasn t really made a difference at all still sits at the BIOS boot atBios says the BIOS is up-to-date and there isn t anywhere in the BIOS itself to confirm that so the mobo and CPU should be friendly with eachother I want to know if there are any other factors I need to know or I ve skipped when doing this I thought it was a simple process of swapping them in and out but if there s more to it or my computer isn t up to scratch in some way I was hoping for some answers and maybe a solution Other specs Windows Pro x w PSU Gbs of Mhz DDR Corsair RAM Nvidia GTX My old CPU which I have running is an Athlon x Thanks in advance nbsp

A:CPU installation problems

You may have to upgrade your power supply to 650 watts or so...

http://www.techspot.com/community/topics/cpu-installation-problems.188722/
Relevancy 23.65%

Here is a video of what happens:

Whenever I try to game longer than 10 minutes on this rig I JUST built, my PSU starts flickering like a strobe light and then my computer freezes. Sometimes it will display a random color though out the whole screen, or just go black. I have checked all my temperatures when this occurs and they are all well below average. I have ALL the latest drivers/windows updates.

In this case like many others, my screen goes black for a few seconds but then recoveres, only to have terrible FPS (I usually get 80+).

System Specs:

CPU: Intel Core i7-3820 Sandy Bridge-E 3.6GHz (LGA 2011)

GPU: EVGA GeForce GTX 660 3GB (Factory SuperClocked)

HDD: Western Digital WD Blue 1TB 7200 RPM

PSU: Rosewill Xtreme Series RX850-S-B 850W

MB: ASRock X79 Extreme6 LGA 2011

RAM: G.SKILL Ripjaws X Series 8GB (2 x 4GB) 240-Pin DDR3

OS: Windows 7 Professional x32

What should I do?

A:PSU flickering leads to GPU failure

I dunno about the rest, but don't you have to populate all 4 RAM slots?

And seriously, Win7 32 bit? Or was that a mistake..

Relevancy 13.76%

Hi I m a new member I recently decided to build my first PC Parts were Asrock Z Extreme MoBo Intel i K - LGA DDR Single stick GB G-Skill GeForce GTX GD OC Seagate Barracuder SATA TB w PSU Now for the problem - BIOS error Extreme update Z77 4 Asrock I installed everything correctly and got to POST so I decided to follow most Internet forum instructions to update my BIOS so I did so over the Internet flash update from the AsRock BIOS setup The problems arose after trying to update it via the Internet Now the motherboard won t even get to POST or show any signs or working Asrock Extreme 4 Z77 - BIOS update error on a monitor the fans for ten graphics card CPU and chassis all work the PSU is working fine But the Dr Debug is showing the status code which states in the description is that it is quot not used quot I don t know what to do iv taken out the graphics card and tried still the same disconnected everything except the socket and all pins are fine on the PCIe slots and RAM Any help would be appreciated ps I have a spare Gigabyte gt GB hanging round and was wondering if I can get the MoBo to work will it be worth sticking the in with the for any improvements however slight until I can afford another for SLI nbsp

A:Asrock Extreme 4 Z77 - BIOS update error

"Now the motherboard won't even get to POST or show any signs or working on a monitor" You might be able to get the motherboard to respond by removing the battery for a few minutes. If not, the motherboard may need to be replaced

http://www.techspot.com/community/topics/asrock-extreme-4-z77-bios-update-error.188524/
Relevancy 14.19%

Hi everyone I ve been having a strange A55 error Z77 Asrock issue since I cleaned my PC this morning When I booted up my PC after cleaning I got an Error which signifies that no memory is installed detected I m using two identical GB sticks of GSkill Ripjaws Asrock Z77 error A55 MHz and both were correctly installed in slots A and B So I switched out the sticks and put them in slots Asrock Z77 error A55 A and B and the system booted up just fine I shut the system down and switched the DIMMs back to their original slots A B and now the computer again booted successfully I played Hitman Absolution for about an hour then turned off my machine and went out Just reached home and started up the system All was fine till I again started the game and it crashed with a BSOD On reboot I again got Error Did the same DIMM switching procedure and all seems well again Any pointers as to what might be wrong I ve used the system without issues for months and suddenly this nbsp

A:Asrock Z77 error A55

Maybe something went wrong with the RAM. When you say you cleaned it, were you talking about dust or cleaning out temp files and the like? If dust, maybe there was some stray static that zapped something. Anyway, see what happens if you leave the RAM in the A2 and B2 slots and play games. Up to now you've only just booted up and then switched them back.

http://www.techspot.com/community/topics/asrock-z77-error-a55.187530/
Relevancy 13.76%

Hi I have a toshiba laptop satellite a15-s157 and a black page comes and says 1DE number 1 error

A:Toshiba Satellite a15-s157 error

Sorry there mate, your choices in the Poll make no sense to me . . .

http://www.techspot.com/community/topics/toshiba-satellite-a15-s157-error.185453/
Relevancy 22.79%

This device cannot start. (Code 10)

I have rebooted my PC and installed the driver using Driver max. I tried reinstalling but that did not help. Any ideas on what is wrong?

The driver installed is 3DP edition Sigma v9.12 (SigmaTel C-Major Audio)

Chipset is a Intel G31 (Bearlake) + ICH7

I have no clue what the motherboard is though.

Even with this information any suggestions would be appreciated.

Thank You

A:Sound card driver installed - but still gives Code 10

List any Problem devices

Make sure devices are connected and powered on
Click Start->Run, enter: msinfo32. Click the + sign next to Components to expand it
Click Problem Devices. Anything appear?
If yes, click on it, Ctrl-A to select all, Ctrl-C to copy it, Ctrl-V to paste into next post
On the other hand, if no devices are listed, tell me so
Generate and attach a DirectX report

Click Start->Run, enter dxdiag and click OK
===> If you?re running 32 bit Windows, dxdiag will launch on its own
===> If you?re running 64 bit Windows, you?ll see 64-bit DxDiag. Click it to launch the 64-bit version of dxdiag
Notice progress in lower left window corner
When done, click Save Information button and save as a text file to your Desktop

http://www.techspot.com/community/topics/sound-card-driver-installed-but-still-gives-code-10.181181/
Relevancy 13.76%

Hi guys,
I am running ASUS M2N68-AM PLUS motherboard. SOCKET 940 ON xp
Ive installed a Gigabyte HD 7770 Graphics card. I installed it according to instructions. The card is getting power but after installing it with the CD that came with it, it keeps saying cant detect drivers for this device.This is obvious because of the display Im getting.
Wouldnt be a compatability problem could it.?

Any ideas guys
Rob777

A:Functioning error after installing video card

Hey Rob, pardon me but I'm a little confused of what you've said. It says here that you have the ASUS M2N68-AM Plus Motherboard and yet, it still on the classified Socket 940? Not to mention that mobo is running both Socket AM2/AM2+ already. That's a long road for that architecture.

Therefore, you shouldn't be having problems with that Radeon HD 7770 of yours, because it's totally compatible with that motherboard; Unless you have checked inside the system unit if it has been connected properly.

http://www.techspot.com/community/topics/functioning-error-after-installing-video-card.179902/
Relevancy 22.79%

A:Code 12 conflict when swapping video cards

Did you remove all the ATI drivers. What version of Windows are you running?

http://www.techspot.com/community/topics/code-12-conflict-when-swapping-video-cards.184715/
Relevancy 13.76%

A:Video hardware error

Are you saying you left the software for the other Video card install.. This would mean the drivers to. If this is the case. and I am understanding you right. If so this may very well be your problem. I would uninstall the software for the old video cards software and drivers.

http://www.techspot.com/community/topics/video-hardware-error.184185/
Relevancy 23.65%

Just wondering if this is common, or is it common to have SSDs fail after a couple of years. I've owned 4 SSDs, all for home use (OS drive) as below:
2x Corsair Nova in RAID 0 - Win 7
1x OCZ Vertex 2 - Win XP
1x Kingston SSD Now V+ - Win XP (later upgraded to win 7. This computer also was moved to another home at the time of OS upgrade).

Now, the RAID array failed and SSD was suspected after attempts to reinstall OS came up with corrupt data errors.
The other 2 just cannot be detected by BIOS anymore.

As you can see, I can't see any similarity between them. There is no similarity in programs used (not even backup programs are the same!)

So am I just unlucky or is there an issue with SSDs in general? Or maybe I'm using it wrong.... (no defrag I swear!)

I have now got all of them RMA'd without a problem.

OCZ was kind enough to swap the Vertex2 to an Agility 3.
Corsair swapped the Novas to GTs. Pccasegear was kind enough to credit those for me, so I'd be picking up a larger drive instead.
The shop I bought Kingston from asked me to go directly to Kingston, but they agreed to take it back. This was the last drive I sent back so I have yet to hear from them.

Thought I'd update.

Relevancy 13.76%

I have no sound on my PC . I used to have before but I don't have now . Any ideas :S HELP

I ran msinfo32 and found this error :
Realtek Ac '97 Audio Pci/Ven_878 etc... This Device cannot Start

A:Realtek cannot start error 10

What are your PC's specs? A desktop or laptop?

http://www.techspot.com/community/topics/realtek-cannot-start-error-10.184217/
Relevancy 22.79%

Hi there I own an Alesis Multimix Firewire which I use to record music on my PC I connect this to my Computer via can (Code 12) use that free This enough it cannot device resources find VIA PCI IEEE Adapter Firewire Everything s been fine up until now it seems my computer won t recognize when the firewire cable is connected to the computer So I flipped open the motherboard and made sure the adapter was connected into the slot properly as sometimes it can slide out a bit since it is at a weird angle when the PC sits upright I rebooted again and it said that the Firewire adapter had been detected Tried connecting the Alesis and still nothing Went into System and Device Manager and under the IEEE Bus host controller tab it shows OHCI Compliant IEEE Host Controller with a highlighted exclamation mark over it I click into the properties of this and it says under This device cannot find enough free resources that it can use (Code 12) the General Tab This device cannot find enough free resources that it can use Code If you want to use this device you will need to disable one of the other devices on this system More specifically under the This device cannot find enough free resources that it can use (Code 12) Details Tab it says this PCI VEN amp DEV This device cannot find enough free resources that it can use (Code 12) amp SUBSYS amp REV amp DC A amp amp Not sure entirely what this means I googled it and a lot of ppl saying to try and update the drivers etc but I don t think that this will do any good as the last driver was back in and I don t think any new drivers have been made since Looking for a logical answer to this one Any help would be greatly appreciated Attached a DXdiag file below too Thanks nbsp

A:This device cannot find enough free resources that it can use (Code 12)

Looks like the motherboard's USB channels or chipset needs to be updated or re-installed

http://www.techspot.com/community/topics/this-device-cannot-find-enough-free-resources-that-it-can-use-code-12.180628/
Relevancy 13.76%

Hi to all. I am not sure if this is the correct board to post my problem to! I apologize if I am wrong.

I save my picture albums in external storage device. Its the memory of an entire lifetime, my school, highschool and all. Now I opened it after many days to find that many of the JPEG files are showing 'X' although their properties are showing appropriate file size. If I try making a slideshow, it says 'No preview available'. I have tried opening it with MS Office Picture Manager and Adobe Photoshop 7 but of no avail. I have tried to look it up on google and tried repairing the images using a few free online picture repair tools, but it says no data available or something. Please help me resurrect those images. I dont understand what could possibly go wrong with them! I use Windows XP home. They are very valuable to me.

Thanks in anticipation.

A:JPEG file error

can you open ANYTHING on that external device?

http://www.techspot.com/community/topics/jpeg-file-error.183222/
Relevancy 12.04%

Pls anyone who can advise me on how to fix this minor issue.. So I had a windows welcome tune whenever I on my PC.. but after a few minutes, there are no sounds when I watch online or some movies on my pc.. and when I click the audio icon on taskbar, it states that there are no active audio mixers.. So I just go to services.msc and windows audio then start it, then everything's fine.. not until I restart my PC.. it is set to Automatic but it just stops on its own after every restart.. I thought of having a system restore but afraid of what might happen.

http://www.techspot.com/community/topics/there-are-no-active-audio-mixers-error-despite-having-a-functional-hardware.182911/
Relevancy 13.76%

My fan recently broke. So I simply jus popped another one on. The fan I replaced it with jus has red and black which is obv live and neg but the one I took out has red black and yellow any idea about the yellow ? The fan works great but CPU fan failed error keeps appearing then when I press F11 it says entering setup but still shuts down.any ideas about how to keep it running just to get into the settings and change the CPU fan settings. Would be grateful with any help. Thankyou.

A:Help needed to bypass the CPU fan failed error at startup

You bought the wrong type of fan. They aren't all the same. You should have bought a CPU fan but you have a case fan instead. The yellow wire goes to a sensor connection that controls the speed of the fan. The motherboard detects the missing connection and throws the error you saw. The solution is to buy the correct type of fan.

http://www.techspot.com/community/topics/help-needed-to-bypass-the-cpu-fan-failed-error-at-startup.170008/
Relevancy 45.15%

Hello, again. I recently got a new hard drive called WD (Western Drive) Scorpio 1TB. So, I set it up and stuff on the back of the computer. As flip it over and and turn on the laptop I want to hopefully see a good sign. Rather, I see nothing with a Black screen and annoying 'Beeping' sounds! I tried many times to put the windows 7 disk in and it would not work and go back to the black screen and beeping noises. Please, help!

Reference:
Model : Dell Inspiron N5030
Hardrive : WD Scorpio Blue 1tb / 8 Ram / 5400 RPM

A:New hard drive installation failure

Perhaps it isn't the hd that needed replacing.

(need some background/details before any real help can be given)

http://www.techspot.com/community/topics/new-hard-drive-installation-failure.181795/
Relevancy 13.76%

Hello,

I've just changed my internet from wireless to wired using a D-Link 2780 modem connected to a gigabyte SP2612R Network Adapter.since then I have had nothing but problems.

Youtube will not play videos - it's just the rotating timer circle all the time. IE 8 opens to a Diagnose Connection Problem even though connection is good - if I then search anywhere there's no problem.

Various Websites give me a 'Diagnose Connection Error' usually https sites.

I've run a Malawarebytes scan which found one issue which was fixed. But still the same annoying issues.

I using Windows XP and I connect with TALKTALK.

Any help is greatly appreciated.

Thank You

David

A:Diagnose connection error

Sorry - I copied a Hijack this log and Malawarebytes in this post but it doesn't seem to have copied correctly. I've now uploaded these logs.

David

http://www.techspot.com/community/topics/diagnose-connection-error.180820/
Relevancy 14.19%

Recently, I had a problem with my laptop's harddrive(?). Whenever I ran a file, it would usually stall/lag, or freeze. May it be a song, picture, application or whatever, it takes hours to load or sometimes it just goes not responding.I can't even copy files from second to primary partition or vice versa (takes 15min to copy 30mb of files? & ends up with)
0x8007045d​Cleaned registry(CCleaner), antivirus(Avira) scanned, MBAM scanned, Chkdsk /r'd, and even though it is a little better than before, it's still messed up. Can hardly get anything to run, what do you think could be the issue?
OS : Windows 7 Ultimate 32bit
It didn't ever happen before so I don't really think it's about system specs, and I don't really remember installing anything since yesterday (that's when it all started)

A:0x8007045d I/O error

The laptop has a self diagnostic test in BIOS, so I just ran that and yeah it's failing with some error codes.
I even formatted and all before checking with that but nope no luck, it's still lagging.

Would had drive solely cause this problem or could there be something wrong with the memory as well?

Update:
Windows won't let me format my second partition

http://www.techspot.com/community/topics/0x8007045d-i-o-error.180103/
Relevancy 14.19%

hi all,

A:VPU error

First off, welcome to TechSpot, second, I don't have that much experience dealing with VPU error's. For those types of error's are normally caused by ATI video card software. I've been a strict Nvidia only guy, so VPU error's, never had any!

But your question might gain greater traction if asked inside our "audio & video" section, I'm providing that areas link.

Good luck...

http://www.techspot.com/community/topics/vpu-error.179721/
Relevancy 13.76%

Hi,

My L500 fan is no longer working correctly

I am getting this message

Warning:a problem with the cooling system has been detected. please turn off the computer immediately, and return it for service.

The fan runs inconsistently (always for a few seconds on start-up, very sporadically the rest of the time, but it is completely stationary for the most part.

The computer is currently in pieces, and I am ready to replace the fan with a new one, however im not sure that will fix the problem (as the fan still seems to sometimes run).

Thread Name - 'My Toshiba Satellite l500 cooling fan has stopped working'
This closed thread had a post at the bottom by kristain, has anyone else encountered and resolved something along these lines

A:Toshiba Satellite l500 cooling error

Are you going to replace the fan or the entire cooling heatsink and fan? Was the heatsink clogged with dust? Keep in mind, this also may be a motherboard issue

http://www.techspot.com/community/topics/toshiba-satellite-l500-cooling-error.179149/
Relevancy 23.22%

Hello I am still learning so hopefully this is an easy one and I am welcoming suggestions I drive making just -- failure Hard sure! am an engineer from who played in the business world since so unfortunately that s the era and extent of my knowledgebase I am trying to salvage a dell laptop that stopped booting a while ago hard drive not found I am not worried about recovering files as I moved them all to a newer PC long ago I created Hard drive failure -- just making sure! a boot disk CD and started the system which shows the A drive as the boot files and the R drive as CD drive with additional utilities The first thing I tried was cd c and the response was quot invalid drive specification quot gt Is this the no-brainer sign Hard drive failure -- just making sure! the discard the drive and start anew PC Dell Latitude D Pentium M GHz MHz MB Memory WIndows XP Pro Goal Create a working PC for kids to use homework and exploring not gaming primarily internet browsing MS Word MS Excel Additional Questions gt Is this PC worth spending a little to restore new drive probably gt Will I need additional memory too it seemd to work fast enough when I last used it gt If the hard drive is unreadable and I don t have Windows CDs how does one re-install windows this was a pc retired by my prior workplace has product key sticker service tag etc Thanks nbsp

A:Hard drive failure -- just making sure!

One thing for sure, you need more memory for that Dell D600... I would put in 2 GB of Put in the largest drive you can afford. Be sure that your drive is either a SATA or an EIDE drive before you order a new one. As you probably know, that system has two memory slots for DDR PC2700. My suggestion would be to get two modules of 1 GB each... which will cost you about $35 to$40 per module, depending on where you buy them.
Because of the destruction of the hard drive factories in Thailand, laptop memory is priced very high right now... you will pay closer to $100 or more, rather than your hoped for$60.

You can get a copy of the Dell Windows CD by calling Dell or going on line... usually free... If you still have the Windows Sticker product ID on the computer. Or they are \$20 on eBay.

http://www.techspot.com/community/topics/hard-drive-failure-just-making-sure.178877/
Relevancy 13.76%

Hello everyone

I'm having a problem with my DVD burner... actually I've had it for almost two years now, but I only decided that enough is enough with this thing and I want to find a solution for it.

The long and short of it is this. Whenever I try to burn something on my DVD, it fails at the end and gives me an 'input/output' error and ejects the DVD. I have no idea why this happens. I should note that my DVD drive is fine otherwise, it can play DVDs and CDs without any problem. If anyone needs any additional information, I even saved the log-file that the my DVD burning software saved after it was finished.

Can anyone lend a hand? Thanks in advance.

A:Input/output error when burning DVDs

What software are you using? Try CDBurnerXP, it's free.
Also, try a different manufacturers DVD's.
And you could look for a firmware update for the drive.

http://www.techspot.com/community/topics/input-output-error-when-burning-dvds.177467/