Windows Support Forum

Page Fault in Non Paged area

Q: Page Fault in Non Paged area

Codes displayed on Blue screen
0x00000050 (0xB176642E)

System Microsoft Windows Xp Home edition
Version 2002
Srvice Pack3
Intel Pentium? 4 CPU 3.20 GhZ
3.19 ghz
1gb ram

I need a pathway to try and fix this blue screen. It has increased in occurance.
Page Fault in Non paged area

I have checked my fan - it is running.
I have run a chk disc (came back to find blue screen)
I have run hijack this- files created -unsure how to read/send them to anyone for reading?
System restore hasn't fix it
Thanks for any help
What else should I run?
Driving me batty!

Relevancy 100%
Preferred Solution: Page Fault in Non Paged area

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link (This link will automatically start a download of Reimage that you can save to your computer.)

A: Page Fault in Non Paged area

This could be a few different things from what I have read. However, one of the most common explanations is that it is a bad RAM dimm/module. If you have multiple dimms, try messing around with different configurations and see if it is the RAM module or dimm. I had this happen once and with my instance it ended up being the dimm.
Relevancy 21.93%

I have just installed the latest driver from Kyocera for the FS-1020D. I am using the USB connection. This problem has occurred with Windows 7 Professional and Windows 8.

When I print the page, the print doesn't start until between 5cm and 14cm down the page (I tried printing off 5 pages, the first page started printing 14 cm down, then the remaining 4 pages left a top gap of 5 cm).

Any ideas?

A:Kyocera Fs-1020D - print starting hal-way down page

Cancel this request - I don't understand why, but after I tried printing from the MP tray, it suddenly sorted itself out and is now printing perfectly from both paper trays!
Relevancy 21.5%

I have a Windows 7 HP desktop system that is connected to the internet via an ethernet cable. The system says it is connected, and a ping confirms it is accessing the internet. BUT, all the browsers say the computer is not connected to the internet (tried Chrome, Firefox and IE). All of the Microsoft network adapters (6to4, ISATAP adapter, ISATAP adapter #2, Teredo Tunneling Adapter) shown under device manager cannot start (Code 10). the Realtek PCIe FE Family Controller is the only network adapter shown as working properly. What do I need to do to fix this? Let me know if there is any other information needed to help me.

A:Windows 7 computer says connect via ethernet and ping confirms but cannot get to any page

Does your router see this computer on the network?
Are you on Private Network or Home Network?
Is the IP address showing 192.168.x.x or is it showing 169.xx.xx.xx?

NIC network card you can do a few things. You can can disable it and re-able it.
Open dos prompt
type: ipconfig /flushdns
type: ipconfig /release
type: ipconfig /renew

Give this a sec or two.

Now under services.msc (use the control panel and type services)
Select view local services
Scroll down for
DHCP Client (right click and stop it) wait then right click and start it
DNS Client (right click and stop it) wait then right click and start it

If none of the above work go into the device manager. under control panel type: device manager. click on device manager

-Network adapters
-Realtek PCI-e this one uninstall the drivers (BUT DO NOT DELETE THEM)

Two options here.
One: Scan computer for new hardware changes
Two: Reboot the PC

Choose Two, because Windows will re-install the drivers and setup network card settings. for you. The Choosing One would do that same but you really want to flush out any prior issues that got you to this point.
Relevancy 29.24%

So I realize that this is my computer telling me that it is not getting a connection to the internet So here is a basic diagram of my setup ISP---- gt Cable Modem----- gt New Splitter---------- gt Asus wifi router working --------- gt Desktop IP also connected to wifi My ISP is Charter Com via a Cable Modem From there I go into a TRENDnet ethernet switch splitter From there I have cable that goes to my desktop one cable to goes Area Local Connection to the upper floor to the wifi router Asus RT-N U The router is working fine and I am currently connected to it I have replaced the TRENDnet Switch every ethernet cable except to Asus wifi router This is where it gets stupid I can disconnect the TRENDnet switch and plug in my Desktop with the IP and it works I have researched this topic via forums for the past month and a half and now after fresh installing windows would like to try and get some input of what other might think is going on I am out of options I Local Area Connection had this setup for quite some time with wired and wifi Local Area Connection but just all of a sudden about - months ago after moving my desk and plugging it all in again it stopped working Here is a text format of Ipconfig of my LAC Configuration for interface quot Local Area Connection quot DHCP enabled Yes IP Address xxx xxx Subnet Prefix xx mask InterfaceMetric DNS servers configured through DHCP None Register with which suffix Primary only WINS servers configured through DHCP None As I said I am now running a fresh install of windows with no Bonjour program on it I have released renewed and about other CMD commands that I could think of The internet options for this adapter are set to obtain automatically I have ran about every malware program I can think of So any help would be greatly appreciated nbsp

A:Local Area Connection

Hmm why the splitter BEFORE the router - - that's not the correct way to add a second router

isp==primary router --- existing PC
to add a second router:

isp==primary router --- existing PC
+--- new router
Relevancy 21.93%

I have an ancient eMachines T- Intel P- Ghz single core Prescott I m running XP-SP fully updated with the exception of SP- If I install SP I lose the ability to do a repair install My AV product is AVG Free This thing s Loading Firefox Page with Slow my Slow Page Loading with Firefox go to erotica finder Trust me I don t log in to my bank with it Anyway it seems terribly slow at loading pages with the CPU at or pushing usage I can t load more than one page at a time Slow Page Loading with Firefox or I get a quot problem server reset before page loaded quot type error Once the other page s have loaded a simple reload page command establishes the connection Firkefox Slow Page Loading with Firefox ver is the browser of choice with quot NoScript quot installed I just did a repair install of the OS which is the only way I could get it to reload the internet driver Intel Pro That doesn t seem to have helped My question is I want anybody s best opinion as to whether this level of performance is what I should expect as typical with this rig or is it just plain worn out and I should retire it with full military honors nbsp

A:Slow Page Loading with Firefox

Try disabling no script. That may be eating up all your resources and slowing down the loading of webpages. If that doesnt work, try another browser like Chrome. I would try completely clean installing windows rather than repairing it since just repairing will not clear anything such as viruses off of the PC. Malware could be another culprit and clean installation will allow you to wipe it out.
Relevancy 21.93%


I'm hoping someone will be kind enough to help with a problem. I am connected to my internet network on my PC through an Ethernet cable, but cannot access the internet through a browser or anything else. This is the second time this week this has happened. I had a separate PC issue early this week which caused me to reinstall windows. I have had the issue with connecting to the internet occur twice now since reinstalling windows, both times after installing windows updates. I resolved the first occur acne by having my ISP come out. I do not know what they did to fix the problem, only that the router was not the source, and he changed something while logged into the modem settings. Any help would be appreciated.

A:Cannot open web page, connected to router

First get a command prompt and then issue these to commands

both should give some answers, neither should timeout or show errors
Relevancy 29.24%

So I was starting my laptop when suddenly I found this error :

(BIOS Date:06/08/09 16:37:07 Ver: 1.40
CPU: Inter(R) Core (TM)2 Duo CPU P7350 2.00GHz

Speed : 2.00 GHz

Initializing USB Controllers .. Done
4096MB OK

Auto-Detecting AHCI PORT 1..IDE Hard Disk
Auto-Detecting AHCI Port 4.. ATAPI CDROM

S.M.A.R.T. Capable and Statues OK

SATA Port4 HL-DT-ST DVDRAM GU10N Devices...

00USB mass storage devices found and configured.

Checking NVRAM....

Not enough space in Runtime area!!. SMBIOS data will not be available

Press F1 to Resume )

I pressed F1 but it didn't resume. I waiting for that NVRAM check but its not getting any results and there's no loading bar to show me the process.
So cannot use my laptop now...

Any idea how to fix it ?

PS. it hard-boot last time I used it because it was out of battery but I didnt install any programs or software..
And I cannot open the Bios setting menu to edit anything

A:Not enough space in runtime area

The bios CMOS battery on the motherboard may have died...
Relevancy 21.93%

I have a client that has been asking me about a way to monitor internet activities or to get email addresses for people who use his wifi hotspots He owns a chain of restaurants and essentially wants a system page access? restaurant hotspot for Login that retrieves people s email addresses when they connect so he can send them promotional emails Personally I think this is a terrible idea but professionally I have to give him my opinion I was going to suggest that he have a sign in page that the router directs traffic to before it gives full connectivity to the user Login page for restaurant hotspot access? This page would Login page for restaurant hotspot access? have a user agreement that allows for sending promotional emails I ve seen these at airports and some other businesses and I hate them but this seems to be the least morally objectionable way to do what he s asking rather than implementing a shady web traffic monitoring system I m pretty sure all this would take would be to have the DHCP managed by a server that through the dns sends all traffic to a page that requires registering a login before granting full access to the network Has anyone done something like this themselves or have a suggestion for a method or application that aids in something like this Thanks nbsp
Relevancy 29.24%

Hi this is my first thread here on Techspot I ve been wanting to find other people in the area that are interested in overclocking as in area overclockers for Myrtle the Looking Beach well I ve been overclocking since the AthlonXP to my current i K I ve now reached the point where I now need to take the next step in to extreme overclocking delidding L N Dry Ice and would prefer to meet up with others that have experience in these areas as well as just meet new people that have the same interest Personally I ve always been big on breaking DMark records My current build holds the record for Firestrike not extreme with a Core i K and GTX and rd Looking for overclockers in the Myrtle Beach area place for Extreme settings I spent hours trying to get the nd place spot on extreme and to get first I ll need to push the CPU over Ghz which I can t do on air or water Since everyone has their own talents I thought it d be fun to recruit a team and see what we can come up with Plus I may be able to help push your hardware further So if anyone lives in the area and is interested please hit me up nbsp
Relevancy 30.1%

Hello, I'm David, and I am having problems with packet loss. I usually use internet to watch videos, play some games and what not, but recently I started experiencing lags. I googled it up, and then tried to see if my pc had packet loss (pinged -t). I had a 6% packet loss. Then I tried it on my other pc (it is connected to the same router and is half a meter away from other one). It had 0% packed loss. Then I remembered that recently I downloaded some programs and stuff on the pc with the packet loss. Could it be the cause of my packet loss? Thank you to all who at least read my delema.

A:Internet packed loss. (Could it be a programs fault?)

What Router brand and model are you using?
Are you connected wired or wireless?
Are you connected 100mbps or 1.0 Gbps.
Have you upgraded the firmware on the router lately?
Also have you upgraded the drivers on the PCs network cards?
Have you ever power cycled the power on the router or modem?
Any switches connected to the router? If so, try a different port.
Have you tried a different port on the router?

Packet loss in a router means the router started degrading on the ports side.
Device could be overheating or just have duff ports (bad)
In your case you can also.

1. Backup config settings in the Router
2. Do a Factory Reset will wipe all prior settings out
3. Restore Backup config settings in the Router

If all was tried you should consider replacing the router only as option though.
Relevancy 28.81%

Anyone suggest some upgrades (if any?) for this old beast, current stats:

LAPTOP: Alienware Area-51« m7700
Processor: Intel« Pentium« 4 670 Desktop Processor w/ HT Technology 3.8GHz 800MHz FSB 2MB
Memory: 3GB Dual Channel DDR2 SO-DIMM at 533MHz - 2 x 512MB / 2 x 1024MB
Hard Drive: 100GB 7,200 RPM
Video Card: NVIDIA GeForce Go 7900 GTX
Monitor: 17" WideXGA+ 1440 x 900 LCD Display
Sound Card: Intel« 7.1 High-Definition Audio
Mouse: USB Logitech« G5 Laser Gaming Mouse
Operating System: Windows XP Professional (5.1, Build 2600) Service Pack 2 (2600.xpsp_sp2_gdr.050301-1519)

A:Upgrade suggestions for Alienware Area-51 m7700

Not much point upgrading, that's quite an old machine. You're better off saving up and building a new system.
Relevancy 22.36%

I have made a mistake in my computer and I do not know what I did or where I did it to create the screen to become black when I go to a second screen. I can open a website fine, but when I go to a second page it comes up black with only very light grey printing. Can someone walk me through changing this back from black to a more readable color?
Oh, I forgot to tell that I have Windows 7 on this laptop.

A:Opening second page comes up black

Are you talking about an external monitor connected to the laptop?
Relevancy 28.38%

Hey guys My internet provider has just recently been switched to Time Warner Cable They came by and hooked everything up to my desktop and my internet worked for that day The next day I had to call technical support and road runner services because my computer says I m connected but I m not sending nor receiving area Missing network connection and local controller any packets Road Runner took me through Device Manager where I noticed a big yellow question mark near Other Devices Network Controller Also after going through my Network Connections there s no Local Area Connection listed The techs responded that they couldn t help me unless I fixed my computer software I have already tried going through Computer Management and checking Plug And Play Services amp RPC Missing network controller and local area connection Services Any other suggestions are much appreciated I m currently working off of my laptop because I can t get online with my desktop Any requested information would just Missing network controller and local area connection be done by my usb flash Missing network controller and local area connection drive Thank you so much for your time nbsp

A:Missing network controller and local area connection

Open device manager. Uninstall those device with ? on them. Reinstall drivers for your network adapter.

What devices are listed under network adapter?
Relevancy 21.93%

Hi Everyone Desperately in need of help right now I m now currently unable to load ANY page which requires a login eg Hotmail Youtube any load which a page Can't requires login Login Page Facebook Yahoo Login Page etc I came across this forum and wanted to post a new Can't load any page which requires a login thread to look for help regarding my problem but this forum also required me to make an account BUT since I m unable to load any log in pages I can t load the log in page to my email too I m a computer newbie so I m really at a loss right now This login problem does not only apply to my computer though other computers in my house my iPhone and my PS also have the log in problem with any application or website with requires a login I m guessing it has something to do with either my Router or my ISP But I have no idea where to start or what to do to find out what s the problem I doubt it s a malware or any kind of bug though But just to confirm what can I do Any help is greatly appreciated PLEASE and thanks nbsp

A:Can't load any page which requires a login

JuicyDragon said:

This login problem does not only apply to my computer though, other computers in my house, my iPhone and my PS3 also have the log in problem with any application or website with requires a login. I'm guessing it has something to do with either my Router or my ISPClick to expand...

Good guess; common symptom across multiple devices implies something higher up in the network.
I suspect you have a port problem for port 443, secured http (HTTPS://)

Using a wired connection to your router, launch a browser and enter the router IP address as if it were a URL. This will access the router config page but should prompt for the admin/pwd.

Now you need the Admin-id, password and the IP address of your router, all of which are make/model dependent - - Please post the name/model number of your router so we can continue . . .
Relevancy 29.24%

There is a laptop I want to purchase which is described to have an "intermittent graphics fault" where the screen turns green.
I have read that this is definitely a hardware error, some pointing out the video cable as being loose.
I was wondering if you guys are familiar with this problem and what is required to fix it.

Thanks in advance.

A:Laptop screen turns green; intermittent graphics fault

Honestly, I would avoid any laptop that has that issue because you don't know what is causing it and if you have to replace the screen the cost is often more than what you would pay for a new system.

Can you link us to this laptop or give us more details about this unit?
Relevancy 27.95%

I'm missing the "local area connection" for a Dell Inspiron 1300 laptop. Hence, I cannot seem to connect to the net.

Anybody got any solutions?

Thanks in advance.

A:Local area connection missing, Dell Inspiron 1300

Is your wireless working? Go under your BIOS and see if the WiFi is enabled or functioning. Download any BIOS updates, WiFi drivers update an etc.. If all is done and you still have the issue. Buy USB WiFi NIC Dongle and test that and see if you can get LAN or WAN connection.
Relevancy 29.24%


I installed SpeedFan yesterday, and shortly after I started hearing this barely audible sort of "screeee.. screee" coming from the fan area. I can hear the fan is working fine, and SF says my temps are normal (around 48c to 50c when idle, maxing at just over 60c when streaming video or playing a game) so my fan doesn't seem to be dying. But I don't know anything about computers, so I don't know.

I talked to an ACER guy (my laptop is an Aspire 5252) and he said use an air duster to clear out dust. I did, and I think I did it right, but the little whine is still there.

Do I need to send my laptop in for repairs?

A:Small sound coming from fan area

I have noticed noises like that in a lot of computer components and laptops. For example, my video card makes an audible noise like the one you described that is not the fan during the loading screens of certain games. From what I have read, this is not a problem, and is just a byproduct of current flowing through certain components.
Relevancy 21.93%

Whenever i type in my ip address in my internet address bar(192.168.x.y) the page brings me to "Unable to connect" "FireFox cannot establish a connection to the server 192.168.x.y". I have also tried it in IE but it just google searches my IP Address. Also this problem is usually off and on. One day i can get on and the next day it wont let me access the page.

A:Cannot connect to my router's web page via IP address

first, get a command prompt and enter IPCONFIG

the last line shown as the Default address is your router's address.

If that's the address you already attempted, then

download LSPFIX,
install and run from an ADMIN login, reboot the system and then try accessing your router again.
Relevancy 29.24%

Hi All,
I heard a noise form my HP ProLiant ML110 G4 tower and it sounded like a fan or hard drive was going on its last leg. I opened the tower and saw the fans running, I shutdown and unplugged the rear fan powered up and still there, tried the cpu fan still there, tried the power to the hard drive and still there, tried the sata cable and power still there. Each time I would put each item back and try the next. I had a ground strap on the whole time. It really sounded like it was coming from inside the cpu heat sink? Where the fan is bolted to. It kind of stopped now, do I just wait for something to fail or does this sound familiar to anybody? Thanks for any help.

A:Noise from CPU area now HP ProLiant

You could remove the CPU's heatsink and fan. Clean off the old thermal paste and apply fresh paste to see if the noise stops
Relevancy 21.93%

Hi everyone out there. I have been working on a emachine desktop that the customer could not get there ie to work. Well I did what I had to to find out that the adapter was bad so I replaced it with an usb network adapter. now it is saying that it is connected but ie will still not display the page. I have made sure that the settings are automatically detected. I need serious help. I know it's something simple. I have reset my router and modem and it still displays the same msg. I have a laptop connected to the same router and modem and its connection is fine. On the desktop I'm even able to update programs on the computer but ie just won't work. What could be wrong? Pls hlp!

A:Internet connected, but IE cannot display this page

You might want to check to be sure the browser is not in offline mode, especially if other network functions are working.
Relevancy 21.93%

Hp laserjet 5p

Wont print whats shown to be print from adobe reader or paint. I used windows xp drivers to install this. Hp doesnt have drivers for this printer. When I all it prints is 2 pages with one of letters on one and bar of ink on the other.

A:Printer won't print what's shown on the page

Does sound like the wrong printer driver.
Which Windows system are you using? I am guessing you are running Vista or 7, and using an XP printer driver.
Relevancy 28.38%

Hi guys, i have recently received a message telling me that a network cable is unplugged. Usually i have this problem with local area connection 2, but it always resolves itself while this one does not. I have tried unplugging my dlink and plugging it back in. please give me any suggestions! Sorry if this sounds dumb to you, much appreciated!

A:Local Area Connection [A network cable is unplugged]

Are using a laptop or desktop, if your on a laptop will say that because your not plugged in the LAN on your laptop which you do not need if it is wireless, but if it is your desktop and you are connect to your router it could be that the NIC card is at fault go into device manager to see if there is any problems with NIC card.

1.Also check your network cables make sure they are in secure.

2. Make sure your network adapter is up to date and working.
Relevancy 29.24%

Let me tell you a bit about my set-up. I am running Windows 7 Ultimate and my internet connection is via a Bt homehub.
My problem is every time I start up my PC I don't have internet connection.
The only way to get it is to go to local area connection and disable it, then go back in and enable it and then I have internet access.
I have taken screen shoots of whats happening.
Not sure if the file has uploaded so sorry if you don't see it. New to this site so having to get used to it.


Can any one see the word file I attached as I can't.


A:Local Area Connection

Assuming that's a wired and not wifi connection.

Before you boot, disconnect from the BT and let the system present the desktop, then
connection to the BT, wait 30sec and you should have a connection.

Your Firewall should be left active

Like to see the View Connections, but copy the text from this and past into your follow-up:
start->Run->enter IPCONFIG /ALL
Relevancy 21.5%

Running XP on 2 computers. Have them connected by a router. I set the router IP to Everything connects great! When I connect to a wireless network, it all connects, but doesn't work ("connection timed out" or "Page not found" errors. The wire connection shows an IP of If I disable my Local Area Network, the internet connects perfectly. I DON'T UNDERSTAND WHY I CAN USE MY LOCAL AREA NETWORK AND THE WIRELESS CONNECTION AT THE SAME TIME! Frustrating to the max! Any network specialists out there who can tell me how to fix this? Thanks!!!

A:Conflict between "Wireless Network Connection" & "Local Area Connection"

berkeleygh said:

Running XP on 2 computers. Have them connected by a router. I set the router IP to Everything connects great! When I connect to a wireless network, it all connects, but doesn't work ("connection timed out" or "Page not found" errors. The wire connection shows an IP of to expand...

You should know that x.x.2.1 is incorrect. For the router address shown, all devices that connect to it *must* be 192.168.3.x where x > 1 and < 255.

I would suspect that you have some static configuration data in the devices.

You want your router to offer DHCP in the range 2->32 (that's more than enough) and
you want all systems to use DHCP for the IP address and DNS settings.

Remove anything in the Alternative Configurations
Relevancy 25.37%

I have my internet connection saying it is connected but whenever I go onto firefox it tells me it couldnt connect.

ipconfig tells me it encountered an error, repairing connection tells me it can't get into tcp/ip settings. I have tried resetting winsock.

I'm currently not at my computer and I'm being forced to rush, so if you need more specific error messages just tell me and I will post with my phone.

A:Local Area Connection "Connected", no net

Post ipconfig /all
You may be connected to your LAN, but not the internet.
Relevancy 21.5%

Hi there I just bought a wbr- dlink wireless router My network situation cable modem hooked up to the dlink router with wired desktop PCs and a wireless Wii connecting I bought the dlink because my previous aging router web D-Link wired wbr page 2310 intermittent resolving stopped D-Link wbr 2310 intermittent wired web page resolving functioning and because it was cheap which I diagnosed by D-Link wbr 2310 intermittent wired web page resolving plugging each of the computers into the modem directly D-Link wbr 2310 intermittent wired web page resolving The connection was perfect in that case but neither computer could connect to anything with the router in between I tried switching ethernet cables that were between the router and modem as well So that establishes that neither the computer nor modem had any issues and that the router which performed admirably to this point suddenly died Now on to the DLink router After installing the dlink I immediately noticed a huge difference between how it functioned compared to the previous router For some reason most basic web page connections will fail unless - refresh reloads are done on the page I can t say the connection drops completely as I ve played online video games without disconnection but web page viewing has become extremely painful Is there anything I can do with this router to fix this extreme intermittent web page resolving issue nbsp
Relevancy 29.24%

I have Vodafone Prepay Broadband so I do not have to plug in any cables. However, recently my internet will not connect properly. The Vodem connects properly but I do not get fully connected as the two pcs with a globe do not appear on my toolbar and no pages will load. When I "Diagnose and Repair" is when I get the message telling me that Local Area Connection 2 is unplugged. I do not understand this as I should not have to plug in anything but the Vodem.

A:Local area connection 2 unplugged

is it the vodem stick that plugs into the usb port? and please mention your operating system
Relevancy 22.36%

Right now i have 6 gigs of ram on my computer and over 10 gigs of page file ram. Do i need that? If i didnt use page file ram, would it make my computer faster or slower?

A:I have 6gb ram. Do I still need page file ram?

What OS are you using? Generally the OS allocates the pagefile. No matter how much RAM you have, a certain amount of pagefile is always necessary.
Relevancy 80.91%

Hey there everyone! I'm pretty new to this forum but i really need your help.

Earlier today i experience 2 different BSOD erros at different times, and for no apparent reason.

I'm not sure what the reason is for either of them since i just reformatted earlier today. I have the dump file for each of the BSODs. It is attached.

Could anyone possibly tell me what the problem could be? Thanks in advance

A:BSODs - (driver is mismanaging system PTEs, page fault in non-paged area)

nothing attached.
Relevancy 30.53%

I went to turn on my Asus P Q-E and got the following It started up but no single beep or BIOS screen Then it turned off for about Please Direction MB Me Fault Help! 0n In Point Right The seconds then it starts back up but no BIOS screen or beep just power to fans etc I have tried clearing the CMOS swapping out memory PSU other known good one does the same Please Help! Point Me In The Right Direction 0n MB Fault thing with the board RAM I know it s good Video Card Is this symptomatic of a bad CPU Or is this my worst fear - I put the video card from this system into my test bed system which has a slightly different board and now it won t even boot although the original board Please Help! Point Me In The Right Direction 0n MB Fault s lights and the test bed system board lights fire up just fine and I can even do power I O and reset from the board I was literally using this system an hour ago shut it down came back to this Could the card have shorted out and is now cooking every board I try it on Have I just trashed perfectly good boards out over Please Help! Point Me In The Right Direction 0n MB Fault a video card Or could it be a bad CPU That is the only part I have not swapped out yet since I wanted to do that last Any help is appreciated nbsp

A:Please Help! Point Me In The Right Direction 0n MB Fault

I've had similar problem once with my existing Intel DP35DP board but with my older CPU i.e. C2D E6600 (Conroe), however after spending hours after hours it turned out that the culprit was CPU; and i only needed to clean it (carbon) and when i put it back in and powered the system ... everything worked perfectly well. It doesn't mean its the same for you; perhaps something is shorting out; I don't think your video card should kill boards as you suspect. It could be something minor like in my case.

By the way, funny thing was I had already ordered a new motherboard (suspecting this one is dead) when i thought of checking on the CPU
Relevancy 21.5%

hi guys Fist of all ty for anyone who can help me I got a hp intel core quads mb memory go fail page not able F11 start - PC boot, Discs to not working on Recovery hard drive NVIDIA gs window xp service pack I am having a big problem here I was downloading a codec when this first happen the blue screen stay like sec then pc reboot choice to start fail since they all lead to he blue screen who stay sec and then restart My Recovery disk are been read since i can press see them with my hard disk but when i try to start with it nothing happen but the blue PC not able to boot, Recovery Discs fail - F11 not working on start page screen for the last hours if try many things if been able with patience and time and focus too see a little bit my error code who looks like i dont know x witch after reading on the internet seem to be x f For now i cannot press f and Reboot when i plug in the pc its unplug if not it only do the same fail by itself for eternity i did deactivated PC not able to boot, Recovery Discs fail - F11 not working on start page auto-restart but it restart and fail anyway please help me thanks nbsp

A:PC not able to boot, Recovery Discs fail - F11 not working on start page

when you hit F8 and disable system automatic restart, it still restarts without displaying the blue screen?
Relevancy 22.36%

Windows 2000 pro
HP DC5000 MB
2 gigs mem
Ok about a month ago I went to surf the web and kept getting "web site found waiting for reply" but the page never loaded.
I used the win 2k install disk, ran the repair and that fixed it. Yesterday the same thing happened "web site found waiting for reply" but the page never loaded, ran the repair again but this time that did not fix it. Help please.

A:Page never loads

Does this happen on all webpages or just one?
Relevancy 29.24%

i am getting a pxe-e61:media test failure check cable fault on my hp nx9005 laptop.
i have removed the hdd from the laptop and installed it in my pc as slave using a 2.5 - 3.5 adaptor with psu. it registers in the bios but not in windows. if i then disconnect the main pc hard drive and set the laptop hdd as master and try and install windows xp using the xp cd it states no hdd present

from this i would take it as the hard drive is damaged/dead

any advice welcome, thanks

A:HP nx9005 pxe-e61: Media test failure check cable fault

So you have placed the laptop Hard Drive in place of your Desktop CD/DVD Drive? (as is what I usually do)
And your Windows version cannot see it in My Computer?

With the 2,5" Drive in place of the removed CD/DVD Drive (on its own IDE Cable)
And with the current Desktop system drive still connected (also on its own IDE Cable)

Go to start > Run > diskmgmt.msc > ok
Can you now see your drive?

If so, confirm the Volume type is Healthy and running NTFS (just like your main drive?)
Relevancy 29.24%

Hi, I have a fujitsu laptop,,,,which I used to use which my modern via local arena connection,,,but 1 day my friend did something to it and now when I connect the jak the pc does not connect?????now I can't see local area network on my network places,,What happens how can I get it back to work. Br gsmnikki

A:Local area connection help

If you can't see the LAN connection listed under Network Connections, your friend probably uninstalled the driver.

1) Open Device Manager. Do you see the network adapter? Rt click and uninstall
2) Now go to the support site for your computer (e.g. Dell, HP, ASUS, etc) download the network driver and reinstall it
Relevancy 29.24%

I'm plugged into my router (Linksys wrt54g v8) and my connection still says "Limited or no connectivity". I'm running win xp 64 bit sp2. I tried uninstalling my ethernet connection. I've tried winsock xp and it didn't work, I've tried cmd netsh winsock reset. I've tried to repair the connection and it says "Windows could not finish repairing the problem because the following action cannot be completed: Renewing your IP address" and I've also tried resetting the modem and router. Can anyone help me?

A:Local Area Connection Issues

Was your internet working previous to this problem? If it was, have you changed any settings? Theres a way you can set a static IP, and that would stop your IP from renewing. Also, are there any other computers working on the network?
Relevancy 28.38%

greetings from South Africa,
I am very new to forums and do not know the correct protocol.
So be gentle with me?
I have a KM4AM Motherboard and the drivers etc.
I bought and installed two LG super multi DVD drives.
When connecting it up I noticed that there was a cable connected to the old secondart CD dive and appeared to go to the motherboard??
I do not know if I unplugged it - however I get the title of my thread when I boot up.
It says 'new found hardware' - Parrallel device'

Any suggestions please

A:Local area connection. A network cable is unplugged

The "Parallel" device is the port driver for your LG DVD drives. You have 2 parallel ports on the motherboard. The blue port is for IDE hard drives. The white port is for your IDE (parallel) DVD drives. How are you connecting to the Internet? The "Local area connection. A network cable is unplugged" message indicates that there is no network cable connected to the motherboards network port. Your Cable or DSL modem attaches to this port
Relevancy 29.24%

I am running a computer using Vista and I just moved it from one room to area fixing network help local Need my another Before moving the computer Need help fixing my local area network I had no problems running both Xbox Live and my internet connection on the computer My connection Need help fixing my local area network is a DSL service through SBC and it runs through a D-Link Router that has slots for ethernet cables as shown below - - - - - There are four immediately next to each other on the left and one set apart slightly farther to the right When I Need help fixing my local area network have my three cables one for the modem one for my xbox and one for my computer in the slots on the left I can connect to the internet through my computer as they are right now but not through my Xbox If I move the cable for my computer over to the slot farthest on the right I can connect to Xbox LIve but I can t connect to the internet through my computer If anybody could provide any sort of solution it would be greatly appreciated EDIT Is there a chance that it could be my ethernet cable While I may have moved the computer from one room to another the only change I really made at all was using a longer ethernet cable for my computer to my router nbsp
Relevancy 21.93%

ok here goes to the best of my descriptive powers.

my computer scree is to light, and the graphics are missing. I must have changed something and now I cannot seem to correct it.

its like its missing where to click example if i am on a page i regularly visit i know where
the places are or i guess, if i place the cursor over that invisible point the hand indicates that i can click.

is this making sense? the pages are not vibrant and are blank in places i have a hp 6400
and i am using a usb stick wireless but it does the same thing when wired at work.

thanks please walk me through the steps to correct.

A:Internet web page graphics setting

You might need to reinstall your graphics drivers. These can be found on the HP support site using the model number of the laptop
Relevancy 29.67%

Hi I have recently built my own PC but when im using it It constantly freezes for about - seconds then it works again but it Fault) for (Hardware short Computer time a Freezing keeps doing it and the Hard Drive light stays on during the Computer Freezing for a short time (Hardware Fault) freeze and when it starts flashing the computer starts Computer Freezing for a short time (Hardware Fault) working again Some people say I go too fast but I only run one program at a time Also it is a gaming computer so it should be able to cope can anyone tell me what is causing this to freeze Also It takes ages for something to install on the computer My system specs are P K Premium Motherbaord BFG GTX Graphics Card GB Reaper GB DDR RAM TB Spinpoint F Hard Drive W Coolermaster Power Supply Pioneer Blu-Ray Reader Drive Q GHz Porcessor Vista Ultimate -bit One of these is slowing my computer down badly but I dont know which one I have a feeling it could be the Hard Drive because of the Slow Installations and freezes and also the light being on when it does but im not sure nbsp

A:Computer Freezing for a short time (Hardware Fault)

Identical problem here.. hard drive light goes solid and pc just stops for 1 min, still able to move the mouse cursor but cannot slect anything or alt-tab etc. Any alt tab or double clicking is cached up and then all fired off at once when the minute freeze is up.

I'm pretty certain now it's down to my Asus P5K-E motherboard (which is what I assume the original poster has)

I'm looking towards M/Board now as I have swapped drives and changed CPU from Q6600 to Q8200 also switched from Vista 32bit to Win7 64bit and still get the issue.

I alleviated it for a while by switching my SATA 300 drive down to 150 mode by setting the jumpers.

Have flashed the P5K to the latest bios with no joy.

Full specs are..
Q8200 Quad
Asus P5K-E Wifi Premium
500GB Samsung SATA300
4GB Ram
lightscribe 20x DVDRW
Sony Bluray Drive (installed after problem had already appeared)
2 x ATI HD3870's in crossfire config.
Windows 7 64bit / WinXP dual boot.
Relevancy 21.93%

I have a Windows XP, and an Ethernet Cable is connected to by a wireless router. It says everything is connected to the Internet, but when I try to go on IE, or Firefox its "Page cannot be found" I try refreshing, and still nothing. Right now I'm on a computer that works ( as why I can post this now) but the other one in a different room doesnt work. I'll post any information as needed. Thanks!!

A:Reload this Page Connected but no Internet (Windows XP)


1) try swapping out the cable between the PC and the wireless router.

2) go into device manager (start settings control panel system hardware device manager) and see if your network card is listed.

3) if its listed then click start run and type cmd and press enter in the black box type ipconfig and post the details back here. we can see if its getting an address.

4) if 2 shows and error then right click and uninstall the card and reboot and let windows find it again and it should reinstall it,

I wont go any further until you post back with what you have tested so far, then we can go from there.

Relevancy 22.36%

Hi all,
I would like some input from the more learned in the room. Since DDR2 is so cheap, and as someone else in here put it, my enthusiast OCD wont let there be empty dimms on my board, I filled er up with 8GB of OCZ. and 4gb of it is pretty much useless. a while back i read up on turning off the page file. its a strange subject as experts seem to be split on weather this is a good idea or not. from what i can tell the page file is an antiquated relic,like memory mapped IO reservations, from when 64mb was a lot of ram. does anyone have any experience with this? , and know how to use it to increase performance? would like to hear from you. thanks

A:Page file input

modern system use pagefiles!

in fact, the whole system uses the model

program ---> accesses Virtual Memory <---> real memory
This allows large programs to run even when there is only a limited amount of real RAM on the platform.

Using multiple programming model then allows many programs to use the VM
at the expense of stealing memory pages from other programs which are currently not active.

Unless you have x64 hardware, that 8gb is fruitless and XP will limit the effective use to something between 3-4gb.

Don't out smart yourself nor swim up-stream -- just go with the flow and be happy
Relevancy 22.36%


I have wireless broadband on my laptop and there is a Protected Mode On, which I think is part of the built in firewall in the trial antivirus programme. It lets me download certain websites like this one, for example, but it won't let me go into Googlemail and comes up with the message in the title.

Is there anyway I can fix this. I googled it and another forum has said to go into Control Panel, Systems and Maintenance, Administrative Tools, Scheduled Tasks. Under "Active Tasks" double-click on "InternetServicesand offers", left click to highlight and press Delete to delete this.

Is this an advisable step to take?


A:Navigation to the web page was cancelled

Is this in Vista, Internet Explorer 8? If so, go to "Tools", "Internet Options", "Advanced", select "Reset"... You might have an Add-On that is causing this problem
Relevancy 29.67%

This first started out as a problem installing some of the larger programs such has Adobe CS and Microsoft Office I had a seperate thread on that located here Memory at Fault? Sticks or Mobo failed, Memtest http www techspot com vb topic html After a lot of troubleshooting I believe that my problem exists in the RAM I ran the memtest for both sticks of ram individually and they both failed The first stick will cause my computer to reboot in the middle of the test The other stick I will get a message that says unexpected interrupt Memtest failed, Mobo or Memory Sticks at Fault? halting CPU So here s my question Is the memory sticks at fault or my mobo I want to go ahead and ask for advice so I know if I should buy new RAM or get my mobo replaced These are my specs for my computer AMD Athlon Dual-Core Processor GHz GIgabyte GA-MA -UD Microsoft Windows XP Home Edition V SP Corsair Dual Channel TWINX MB PC DDR MHz Memory x MB Can someone confirm that I m using the right memory It s not listed on the Gigabyte s website as one of their supported ones but it also says that many are not listed Any help on this would be great I ve tried testing the memory on other slots with same results and tried cleaning it with an eraser Thanks nbsp

A:Memtest failed, Mobo or Memory Sticks at Fault?

Your board specs say PC2 9600 or DDR2 1200 memory, like this:
Relevancy 30.1%

hi all annoying little problem i had a virus called iamfamous dll 1300 Fault Battery Inspiron Meter which i have removed but now Inspiron 1300 Battery Meter Fault my system is working fine or at least i thought i noticed my Inspiron 1300 Battery Meter Fault battery meter is missing from the tray next to the time and date ive googled this a million times every says untick the box in power options to always show then retick ive tried this about times lol next trick was to install dell quickset which still didnt show me how much battery i have left the battery status on dell quickset is greyed out and on my inspiron the fn f to bring up battery meter doesnt work any with a similar problem or someone who has a solution for me please help some screenshots are attached also no more warnings are popping up about critically low battery and so sometimes when power cable is loose laptop will just power down not knowing much about computers but id say mayb theres an error from the pc communicating with windows as its running from battery but wont display info about battery and im on XP professional sorry about the format jpeg was taking ages to upload nbsp

A:Inspiron 1300 Battery Meter Fault

Try doing a Dell restore of the OS
Relevancy 21.5%

When composing an e-mail in Outlook 2007 (Vista), the typing never wraps round to the next line; it types as one continuous line from left to right. What do you do to change this back to multi-line?

Thanks for you help.


A:Outlook 2007 (Vista) email page layout

Which format are you using to compose the message? (HTML, Rich Text, or Plain Text?)
Relevancy 37.84%

Yeah I have the infamous paged error BSOD that comes up as

Page fault in nonpaged memory.

At any time my comp is running I suddenly get
0x00000050 0xE4EE8000 0x0000000 0x8052E797 0x0000001

Sometimes these come up too:
0xE5106000 0x8052E797

I am running a E8500 with a very large fan keeping it cool all the time, 4 GB Ram of Coursair 6400 800 Mhz dual 2 Gb , a 8800GTS 640 Mb card and 2 hard drives one is 80 Gb Raptor and the other is 250 Gb Western Digital. The motherboard itself is EP45-UD3R

Here is the memory dump, please help!

A:Paged error problem

Okay I found the solution myself, I looked through a newer dump file and noticed a broken driver. Turned out that I had to install an old, broken copy of spyware terminator to get it working.
Relevancy 21.93%

A few weeks ago we downloaded an updated driver for our video card so that my son could play a particular game. Now everything on our computer is larger in size: our desktop icons, our internet pages, our office software, etc. Is there an easy way to return everything back to it's original size or I am going to have to do it program by program?

A:Quick Question about page size, icons, etc

Right click an open area of the desktop, Left click properties, left click settings, move the screen resolution slider to the right a couple spots and apply. That's how you adjust that.
Relevancy 30.96%

Hi, I just pressed the power button on my laptop and the power light came on as well as the battery light and then went off after a second, so I pressed the power button again and it did the same no matter how many times I did it or no matter how long I did it, so I took the battery out of the laptop and blew the pins, left it out for 3 mins and put it back in, and then it worked fine, im using it now, but is there anything that may be causing this.
it is the first time it has happened but I thought if it is gonna be a problem I might as well as get ahead of it.
So does anyone know what is causing this or will it just be dust on the battery

A:Power On Fault

so tell us exact laptop model
Relevancy 28.38%

Hello everyone This is my first post I m looking forward to becoming a member of this community Here is my problem I m working on a Windows XP Desktop Dell which is connected to a cable modem using an ethernet cable I also have a Windows Vista Notebook HP which connects to the Internet my secure network wirelessly I use Time Warner Roadrunner as my ISP A month or so ago Time Warner contacted me and asked if A Connection: Unplugged Local Area Cable Network is I wished to quot upgrade quot my Internet service speed for a nominal fee I think it was per month As I am self-employed and frequently upload download large files for my business I decided that this was worth the expense So I agreed to make the upgrade which was done entirely on their end by resetting my modem whole Local Area Connection: A Network Cable is Unplugged process took about seconds Since that time I Local Area Connection: A Network Cable is Unplugged ve had nothing but problems with the wireless connection on the Notebook Any time I attempt to download a large file on to that computer again all done wirelessly the download fails and I lose my Internet connection on that unit e g the small globe icon in system tray which indicates that I am connected to my network disappears and is replaced by a red x or the yellow alert icon At the same time this occurs I get a notification on my desktop PC the one that is connected using the ethernet cable stating Local Area Connection A Network cable is unplugged The outage usually lasts for anywhere from seconds to minutes before restoring itself I have double triple and quadruple checked all of my connections and I can assure you that nothing is unplugged Two calls to Time Warner have yielded little along the way of information or results The first time I called I was told by a snippy tech rep that quot obviously one of your cables it unplugged quot The second time I called I was told that the network card in my desktop was going bad and I needed to replace it Although the second explanation sounds a bit more plausible than the first I remain suspicious Why is it that this problem first manifested itself within hours of my upgrading my Internet speed It never occurred so much as once prior to the upgrade And why does the problem NEVER occur not even once when I am downloading files to my desktop And why do I get errors on BOTH machines when I am attempting to download large files to the wireless machine only A friend who is hardly an expert but who is somewhat in the know seems to think that the problem lies not within the network card but with the ethernet cable itself that it may not be a good enough quality to handle the higher Internet speed He suggests buying a new ethernet cable and seeing if this remedies the problem I m not opposed to that solution but I d like to get other opinions before doing so Thanks so much Mister Winter nbsp

A:Local Area Connection: A Network Cable is Unplugged

First, be sure to update the firmware in the router, the NIC drivers for your wired connectons, and the wireless WiFi driver.

Brand names and model numbers for all network devices may help here.

I've seen cases where this symptom occurred due to the speed of the connection
and as you have just upgraded your network capacity, this may apply to you.

Broadcom 10/100/1000 adapters (and likely any gigabit adapter) set at 1000 flood the simple router and cause it to drop connections.

First try setting 100mb, full duplex and if it is stable stop here

Next try setting 100mb, half duplex and then move to

10mb half duplex.

And why does the problem NEVER occur (not even once) when I am downloading files to my desktop? And why do I get errors on BOTH machines when I am attempting to download large files to the wireless machine only?

A friend?who is hardly an expert, but who is somewhat in the know?seems to think that the problem lies not within the network card but with the ethernet cable itself..Click to expand...

If the wired desktop can run fine, the the cabling is not in question.
The download via the wireless will run much slower than the wired connection
and cause the router to back off -- the speed capacity up to the router is far
greater than the wifi and the problem is in the speed mismatch.

On my Netgear router, I can set the MTU size on the WAN Setup page.
You should have something <= 1500. Personally I use 1492.
Relevancy 80.41%

Yes I have Area Nonpaged Fault BSOD-Page in fallen victim to the infamous alias doesn t really tell you anything code stop error To set up my current state of frustration here s my story A few weeks ago my rig began randomly blue screening and hanging no real rhyme or reason just bam blue screen or hang I began the usual diagnostics restored to previous states ensured current drivers etc ultimately to discover one of my RAM sticks as bad Memtest I replaced both sticks with a different set formatted re-installed the OS long story got the system back to operation Up until today all was good my rig was seemingly running as strong as when I built it Then bam BSOD code with the ambiguous error statement other than codes that I have not been able BSOD-Page Fault in Nonpaged Area to find definitive explanation for At this point however I have noticed that the first and subsequent BSs I have gotten are only during video or D applications pretty easy at this point to suspect one of the video cards But before I spend yet another week tearing into my box after I spent what little spare time I ve had in the last two weeks putting it back together I thought I d ask if there is anyone who can clarify the error codes for me or point me in the direction of clarifying them myself googling turned up zip The code STOP x xBAC F x xBAC F x My rig relevent specs Mobo XFX i nVidia chipset most current BIOS CPU BSOD-Page Fault in Nonpaged Area E stock voltage and clock GHz RAM Gig - gig dual channel kit OCZ Reaper DDR PSU Corsair TX amp single v rail GPU XFX GTs in SLI drivers OS Windows Xp Pro bit SP all current updates Onboard audio used current drivers - DVD RW drives SATA HDDs totaling Gig all nicely fitting in a well circulating Cooler Master Centurion My guess at the code would be since there are two BAC errors with one followed by an IRQ error that maybe one card is bad Takin a wild shot there but like I said my searches up to this point have been fruitless Any help would be much appreciated TBolt Edit Forgot to mention that following a BS I reboot into Windows normally fine and can BSOD-Page Fault in Nonpaged Area stay there for relatively long periods of time so long as I don t do anything too demanding or requiring heavy use of video d sniff video card or driver sniff I ll attach a dump file or two once I figure out how Edit Ah ha here we go attachments nbsp

A:BSOD-Page Fault in Nonpaged Area

Minidumps are most commonly placed in: C:\WINDOWS\Minidump

You can upload your dumps, as is, with your posts.
Relevancy 30.53%

I'm trying to fix a Toshiba M30 for a friend.. he he

I have looked around a bit and cant really find anything similar to this problem. It has a kinda mixed up mish mash on the display but you can just about see some stuff to navigate around a little

I have reseated the display plugs at both ends with no joy. I dont have another monitor to try but as soon as I have access to one, I will. If anyone has a sec to see what you think..

cheers, surfersaiyan.
OS that you can see is backtrack.

A:Toshiba M30 display fault

The Toshiba has a history of trouble with the inverter. Available on eBay for about $20,,, 18 screws later, it will probably work just fine... Retest in SAFE MODE to see if you get any faint images in low resolution on the screen... or connect another monitor to the port in back. If no monitor there, it may be the system board.
Relevancy 22.36%

Hi There is a problem with the background of our monitor My homepage is msn com and to the left side of the screen there is a pull-out version that is stuck there You can t delete it and the web url or any stuff that appears when you get on internet explorer isn t there The page itself is there but none of the other stuff Wierd page msn Picture pressing F while you re browsing except the tab the name of Wierd msn page the url or any of the loading icons are not there and you cannot maximise or minimise it It is stuck on the left side but you can pull it out so that it becomes your full background It appears behind the desktop icons and there are usable links on the page I have no idea on how to get rid of it When you pull it back as far as it can go to the left an inch of it still sticks out I want it gone Gone for good Is there anyone who has a solution nbsp

A:Wierd msn page

Actually I'm a bit confused if you mean within your browser or just sitting on the Desktop.

I'm going to go for Desktop

Start-->Control Panel-->Display-->Desktop (tab) -->Customize Desktop... (button) -->Web (tab)
Delete anything in there (by highlighting then Delete (button))
Relevancy 25.37%

Greetings folks This is my first post so Hi to all I got a network connection problem I formatted my pc today because when i turned it on it gave the windows screen and then it said that it can t access Problem/Network Area Connection Loca Problem the quot SYSTEM quot folder so i formatted it since it s been a while since i ve done that like a year and a half After that I tried connecting to the internet by inserting the ip Loca Area Connection Problem/Network Problem address numbers and the DNS I use cable connection it didnt work then i tried chanding the network card number it worked for like minutes but then it stoped it said quot network cable is not plugged quot or something like that but then it plugged i dont know how but no internet connection so i went to check for the network cards and there was like or of them NIC i guess it was written i tried uninstalling them but it didnt work so i disabled them but still there was no internet connection I tried ipconfig all renew etc but still NO PROGRESS So if you may PLEASE help me in this cuz im supposed to give my final thesis at the university at the end of this month Thanks in advance Oh and also stuff like Local Area Connection started appearing S nbsp

A:Loca Area Connection Problem/Network Problem

Are you getting any 'link light' on the card you plug the cable into? Usually a little green light or Amber I think it is on Dell. If you are not I suggest trying a different cable from your modem to your PC.

Also, is your PC directly connected to the modem or into a router?

And when setting your IP address are you going to Start --> Control Panel --> Network Connections?
Relevancy 79.55%

Good morning So I am receiving the above error debuglog txt is attached But I d like to give some background - I searched the forums and saw many similar problems but just not quite the same I have a Toshiba Fault Page in Blue Area Screen Nonpaged - M -S about - years old running Windows XP S Over the years I ve upgraded Blue Screen - Page Fault in Nonpaged Area the memory several times first from factory Blue Screen - Page Fault in Nonpaged Area mb to mb - just had to add second stick for this then recently from to - the max this laptop can handle required replacing both sticks Prior to purchasing the memory I searched several sites to ensure compatibility I also had a tech at the store verify I ve learned the hard way evil So - supposedly this memory works with my system It was recognized upon install and no problem - surfed the Net all day played my online MMORPG etc no crashes - until I put my laptop into hibernate Trying to come out it said it didn t have enough memory to complete API uhh huh So the next night I just put it to sleep not hibernate - this time I got the error above I ve tested the RAM both pieces together and individually in different slots - multiple times - they are fine apparently I ve even put them into my husband s laptop and fooled around - no problems And as I said this only happens when coming out of Sleep or Hibernate It is not triggered by playing graphic-intensive games I can run the internet games and music apps all at one time without setting off the fan I ve played and played to try to get to the root of this evil My next step thoughts are - change the virtual memory allocation it is way under the recommended and dare I say it resort to one of those registry cleaning apps Could that really be the problem Please help nbsp

A:Blue Screen - Page Fault in Nonpaged Area

you could have registry issues. more than likely it is power management issues.

but try CCleaner. works great anyway
Relevancy 80.41%

Hello first of all nonpaged Page in area 0x00000050 fault sorry for my bad english But i hope someone will understand me and will try to help because im out of ideas So there is how it started I ve Bought Page fault in nonpaged area 0x00000050 a new PC recently everything only one thing Page fault in nonpaged area 0x00000050 witch i have old is my hard disk drive with old windows xp installed So i started it installed all drivers and i Page fault in nonpaged area 0x00000050 was playing a game i dont exactly remember how long but i think it was hours of playing and my pc restarted without any blue screen-of death after that everything was cool and next day it happened again few times so i disabled autorestart function in windows and next time it crashed today it showed me this error PAGE FAULT IN NONPAGED AREA STOP X So i tried to search on internet what it cold be and ive found here topic with the same problem and maked dump files same as this guy did and i hope that someone will help Any ideas Thanks Avenger nbsp

A:Page fault in nonpaged area 0x00000050

Try reformatting your hard drive and installing a fresh copy of XP on it
Relevancy 19.35%

I have a HP laptop with D-links router. The wifi signal was working for a few months and all of a sudden it stopped working. I have tried to reinstall the router and checked everything i could think of but it still isn't working???? I have windows xp and i checked to make sure all my wireless setup was right but still not able to get internet unless i plug straight into the modem. Please offer any advice you can think of. My ex-boyfriend was good with computers, but he isn;'t around and i don't know what to do. Thanks!

A:I am connected to a wifi signal, but I get "page can not be displayed"

Have you tried reseting your router? If not,

1. Disconnect the router from the modem (not always necessary, but sometimes it is).

2. Find the reset button on your router (you will probably need a paper clip).

3. Hold it for 15-30 seconds, then release and let it set for a minute or less (probably when the power light stops blinking).

4. Do the same for you modem.

5. Once all of "internet," "dsl," light, or both, are on and not flickering, connect the router back to the modem.

Give it a minute or two. Once your hardware components make friends again you may or may not have to run through a basic setup for you router (it depends on the model, don't worry, most new routers are very easy to setup). If it doesn't good for you. Either way, your net should be working. Hopefully, if not, keep posting!

That should fix your wired part anyway, as for wireless you may or may not have to reconfigure something. If it still isn't working, post what model/version your router is.
Relevancy 27.95%

I moved into a family apartment and had my landlord hook up my at cable network Local area random unplugged intervals Toshiba Windows laptop to his Lynksys wireless router that everyone in the house is using He gave me a Lynksys USB wireless card also which worked well I was able to connect to the Internet with no problems Last Local area network cable unplugged at random intervals week I had the IT guy at my work hook up a remote desktop server to my computer so I could access my work files from home My work files are not wirelss When I brought my computer home that night I started it up and was on the Internet for about minute when it kicked me offline and then the LAN computer icon on the bottom said quot Network cable unplugged quot Every minute or so the X s on the LAN computer icon go away and it says quot plugged quot again This will last for about seconds and then it becomes unplugged again I think Local area network cable unplugged at random intervals the IT guy changed a setting that kicked me off the wireless router but don t know how to switch the settings back Please help I m not sure if the IT guy even knows what he did nbsp

A:Local area network cable unplugged at random intervals


Software that accesses remote (sometimes mainframe) files often needs exceptions (changes) to the firewall. Your IT guy will either have to do it or give you the directions as to what to enable.
Relevancy 82.77%

Hi, I decided to reformate my HD from 0 Because of bluescreen errors, I have a P4VM800 Board with 512MB DDR 333 ram and a P4 1.7 CPU, the thing is that when I try to install XP SP 2 with a new reformatted HD the installer is giving me a bluescreen.

The reasin to reinstall were to get rid of the bluescreen.
I was getting random restars and windowws has recovered from a serious error messages... but after a day I could not make the computer start without a blue screen.

I have changed the memory module for a new one and have removed the wireless card and modem so the only thing conected to the board are the CPU and HD and CDRom. CPU Fan is clean and working perfect.

Any idea?

Thank you in advance.


A:Blue Screen Page Fault in non Paged Area Installing from 0

it seems I am a bit lost about where exactly is the cache memory in the Bios Config...
Relevancy 21.93%

Hi I have a Dell Inspiron laptop and it is in an almost new condition even thought it is over a year old I recently did a bunch of virus scans thinking Inspiron will laptop not page Dell open IE I had a virus or I was afraid I had one After all the scans I had no virus or trojans at all I ran a powerful program called SDFix After that last scan I lost my wireless Dell Inspiron laptop IE page will not open connection - my IE page won t open In device Manager under Networking I have listings - no red x s or anything - Dell Wireless WLAN Minicard - Broadcom x Integrated Controller There is a strong signal in the green bars in the tray no problem finding the Dell Inspiron laptop IE page will not open signal Just that IE won t open up to a page I also have this Dell Network Assistant and when asked to connect it says I have no problem at all Can you please help me I would appreciate it so much nbsp

A:Dell Inspiron laptop IE page will not open

You are probably going to benefit from a tech or an experienced friend. SDRix has damaged some of your install, and fixing it is not easy for the uninitiated. Were it my machine, I would simply reformat and reinstall using the recovery/restore disk that came with the machine.
Relevancy 82.77%

hello everyone uh hey i m kinda msgs, in IRQL_NOT_LESS_OR_EQUAL Page and BSOD non-paged area, fault help! plz new to techspot um yeah i realize u guys must see IRQL_NOT_LESS_OR_EQUAL and Page fault in non-paged area, BSOD msgs, plz help! these error IRQL_NOT_LESS_OR_EQUAL and Page fault in non-paged area, BSOD msgs, plz help! messages all day and i m sorry for being repetitive but i m really stuck and i really need ur help i m not really that good with computers and their related problems so plz i really need some advice cool basically i bought a new computer on the st of december its basically meant for work but i did get a nice graphics card cuz i thought i d treat myself to able to play some awesome games out now my specs AMD Athlon X dual Core processor Ghz Ghz of Ram Geforce GT Graphics card Winfast motherboard GXM MA-RS windows xp pro with SP Latest Directx c basically i ve had non stop problems with it the computer basically gives me at least blue screens of death or freezes at least twice a day and all of the blue screen stop errors have been IRQL NOT LESS OR EQUAL or Page fault in non-paged area errors these errors mostly occur while i m playing games but often occur while randomly on the internet or arbing around windows my brother told me about this site and said i should attach minidumps which i ve done but i had to choose from so i chose one from the th of december the th and one from tonight the th cuz i ve installed different things at different times i did take the computer back to the place i bought it from and the guy pretty much said it has to be the geforce drivers processor drivers or the memory so i got the latest geforce drivers windows updates motherboard drivers lastest direct x c and latest game drivers everything and didn t solve anything infact i thought that the latest video drivers might have made things worse so i went back and the guy ran a video conpatibility application dMark i think to test every aspect of the computer memory cpu and the graphics card and it completly ran through without any problems without crashing or anything infact it totally killed it so the guy said it must be the games i ve been running and it can t be the computer but i ve tried tons of different appz and games and they all do this he had no idea how to fix it also often when the machine gets a blue screen i restart it and it usually crashes again as soon as it gets back into windows once and sometime twice before windows srtas up properly again Error Info on one of the occasions before i took it back i wrote down the stop error info PAGE FAULT IN NONPAGED AREA techinfo STOP x XFFFFFFFF X XB DEE CD X avg core sys - Address B DEE CD base at B D D Data Stamp CFC B the problem files are often different too the most recent problem file i got was usbehci sys i have absolutly no idea what to do um after readin though a few threads i read alot about disabling memory caching or hyperthreading and also extending page limits which i didn t undertsnad so i restarted the computer and had a look through the bios but i dont really know what one s to enable disable i thought about having a bash but i thought i didn t really want to mess my computer up any further without knowing exactly which option to change any light on this would be much appreciated aswell as possible the power unit not being adequate for the system i have no idea what power unit i have is there way to find out in windows one stange thing i thought was that i ve run a few different games like half life and ES oblivion and the most problems i vc had is is that it freezes for like seconds and then continues but with a game like company of heroes i can t even make it thourgh the training part withjout it crashing aswell as cold fear which also gives blue screens i dont undertsnad how games like oblivion which are really cpu and graphics intensive give less problems than a game like company of heroes which isn t as intensive just a thought i guess i ve just finished ... Read more

A:IRQL_NOT_LESS_OR_EQUAL and Page fault in non-paged area, BSOD msgs, plz help!

usually that error is a conflict between windows and the display drivers.

drivers can be difficult to remove sometimes
Relevancy 21.5%

I use FIOS. I have a static IP address set up. And manually entered my DNS servers which I got from my ISP -verizon.

Everything has run fine until recently about once a day I get 'problem loading page, or wherever took to long to respond'

at this point no sites will load except for home page or pages that don't change and are in my cache

If i flushdns then registerdns it works again till the next day

Just trying to determine what could be the cause for this. It just starting happening in the last week or so

Also when this happens I can ping websites without packet loss, but I can't load them through a browser

A:Problem loading page - resolved by flushing DNS/ register DNS

change the static DNS addresses to use DHCP. This is effectively what you're
doing on a temporary basis with the /registerdns
Relevancy 27.95%

Hi thanks for looking,
I have just recently reinstalled windows. When I plug in the lan cable, no LAN connection comes up. I have never had this problem before and usually just doing this will allow me to have internet.
Whats wrong? How can I fix?


A:Local Area Network (LAN) connection isnt showing up in connections

It needs a Driver. You'll need to visit the Motherboard Manufacturers website & download the driver for your model board.

Before you go there, look in Device Manager {control panel / system /hardware} and see if anything else has an exclamation mark - they'll require drivers too!
Relevancy 29.24%

Yea u just need to know is this worth it? All i am trying to do is play Some World of Warcraft and you know a few other games. Nothing too Graphic ( example: Battle Field, Fear, Bioshock, ect..) You know games like WoW, CounterStrike, Mabey Warhammer when it comes out. Im ganna be doing digital art on this thing using Adobe photoshop and Corel paint software. As u can see im on a budget so would this be good?

A:Alienware Area-51 m555

It looks decent, however keep in mind it is very hard to modify laptops, and if you were to be doing graphic work, I would recomend a desktop just so you could do modifications as needed, such as better graphics cards... Of course, I am in the same boat, I do graphics, and am looking to replace my laptop (my stuff has to go back and forth from work to home) and that looks like one I would consider

*However, I just went in to add all the pieces and upgrades I would need and it doubled the price, plus some... keep in mind if you are on a budget*
Relevancy 29.24%

Hi guys.

I just thought i'd come to you...YET AGAIN...for another computer problem!

You see I recently just bought a D-Link Wireless router and after a couple of games of Warcraft 3 my connection would be lost!

I went to see what was wrong and I found THIS in place of what I normally see to repair.

I tried repairing it but no luck.

I'm being forced to use just my broadband box but it still shows up.

Can anyone tell me what this is?

A:Help with Local Area Connection/Router!

Hum.. That picture is not helpful at all.
Relevancy 30.53%

Hi everyone this Hardware My Fault A PC Help On Need Diagnosing is my first post on techspot so be nice My problem is that i started my pc up earlier today and i was prompted with a bios screen asking if i wanted to boot windows normally safe mode or from last known good configuration I chose last known good configuration My pc then restarted and nothing displayed on the monitor so i turned it off and back on and nothing displayed again Anyways im at the point where no matter how many times i try the display will not show The pc sounds as though it starts up but wont load the bios screen I have tried motherboards switching over all the components thinking it was a faulty motherboard eventhough it had worked the previous day I get Need Help Diagnosing A Hardware Fault On My PC the exact same problem with this motherboard too I have Need Help Diagnosing A Hardware Fault On My PC disconnected all the drives and i still get the same problem My PSU Need Help Diagnosing A Hardware Fault On My PC is an antec w which is only several weeks old so i wouldnt say it was a problem with it not supplying enough power to the motherboard The motherboard does not beep at all either So i have no way of finding out whats wrong with it I have left it unpowered and removed the bios battery several times but no change Also my dvd rom will not open whilst connected to either motherboard it will only open when i remove the IDE cable and run it only with power The computer doesnt even show anything with the dvd drive disconnected either I have also tried reinstalling the ram but if it was the ram then the motherboard would beep right My only guess is that it could be the cpu but the fan powers up and there is no bleeps from the motherboard indicating this I would really appreciate any help that you can give And before you ask all the cables have been connected properly Specs are amd dual core skt ASUS a v-nm and the SE motherboard was the original one gb mhz kingston ram gb SATA seagate HDD Empire DVD Writer Geforce gt Antec w PSU Thanks for reading this by the way and thanks in advance to all the replies Its really frustrating lol Ryan nbsp

A:Need Help Diagnosing A Hardware Fault On My PC

It looks to me that you have done a very thorough job of fault diagnosis and i agree with your conclusion that the fault could well be with the CPU.
Relevancy 82.77%

Hey, my brothers computer has recently been getting the BSOD with the page error. I did numerous things to attempt to fix the problem (reinstalled windows, updated bios, cleaned out all the dust inside..) and nothing has worked so far.

I have run memtest and it did find errors and i did check the temperatures and it shows the cpu is running hot (even though theres 3 fans inside the computer). I figured I'd check here with the minidump to see if its something you can def find or its the hardware.

The bugcheck was: 0x00000050 (0xbad0b148, 0x00000000, 0x8057e489, 0x00000000).

between the blue screen of death on his computer and the red rings of death on my 360, im hating microsoft right now. any help is appreciated.

A:Blue Screen of Death - Page Fault In Non Paged Area

hey there... Try this.... if u have more than one chip of RAM, take one out and allow the pc to run on the remaining chip/s. Do this for all the chips. One or more of your chips might be faulty.

Also check your PSU to see if its not damaged or just gettin old. PSU's tend to lose power output over time and this might be causing your cpu to run hot. Alternatively put a fan of some sort on top or to the side of your OPEN case. This might help cool down the cpu. lol, this is an old but effective method of prolonging PSU death.

if that doesn't work, check your might be damged

let me know how it goes

Relevancy 28.81%

I want to play Warcraft 3 over Local area network, but i don't have a clue what to do.Me and my friend both have cable internet and i'm the only person that has router . thanks

A:How do i connect two computers with local area netwok?

Check out this page. I hope it helps you...
Relevancy 29.24%

Hello everyone, I hope this is where i am supposed to post this...

I work from home on a computer that is directly connected to our satelite internet and from that point there is a D-Link wbr 2310 wireless router connected to my computer in order for us to run our second computer in the other room.
I most often will get a bubble that comes up on my computer that states "local area connection unplugged". This happens when the other computer is on OR off. Could this be caused from the wireless router? When i am working i also use a VOIP program that i log into. This does not happen every time but on some days it will happen 2-3 times. The disconnection is not for very long but it will kick me out of my VOIP program and make me reconnect.

Can someone please help with this??

A:Local area connection unplugged

Is it possible to run a day without the router....just for process of elimination? I'm not familiar with satellite myself, so I probably won't be a lot of help, but eliminating things one at a time is usually a help.
Relevancy 28.81%

hi there i have a problem with my local area connection for some time now i get this message that s in the title of this thread i tried handling it myself and while doing so i tried to no limiter connectivity connection or Area Local disable or renew my ip that s what i limiter or no connectivity Local Area connection found in some forum while trying that i got an error message saying unable to contact your dhcp server at this point i gave up since i don t really understand too much about this stuff another thing which might be related to this matter is another error i get in my uTorrent program which says that something is limiting my network traffic and download speed really seems a lot slower i tried to open a port on windows firewall but it didn t help i also have Comodo firewall and as far as know the program is allowed to connect but when i tried to test the port via the uTorrent program i got an error Welcome to the Torrent Port Checker A test will be performed on your computer to check if the limiter or no connectivity Local Area connection specified port is opened Checking port on Error Port does not appear to be open Please see www portforward com for more information about how to map a port Please make absolutely sure that PeerGuardian or Protowall is allowing utorrent com in limiter or no connectivity Local Area connection either of those programs Those of you using ipfilter dat should make sure the list does not include the website s IP After making sure of this re-run this test by refreshing the page F first question i have is general what is this local area connection i have another connection running under my isp s name and there s no problem over there are the two problems related what can i do about it but please answer in simple language i m not a computer expert and all the professional words don t mean much to me hope you can help nbsp

A:limiter or no connectivity Local Area connection

You need to go into your router and Open ports for your PC that using using with this program called uTorrents.

Example: - was the pc you're running the software on...

In the Router there will be section called Port Forwarding..

Port# 111111 -to- 19999 (TCP or Both (UDP) for PC

That's how it's done.. If your router is UnPn supported then you don't have to do a thing. The router will setup the port you need. But in the program called uTorrent you need to open the ports 11111 or 199999... Another bit is you can use Port# 111111 to 111111 instead of a range.

Make sure your firewall supports these ports otherwise these ports will be blocked
Relevancy 79.55%

I have a client computer that got the page fault in nonpaged area error. I tried everything, including booting to WinXP CD, safe mode, even my ERD Commander disk. Changed the memory, disconnected all PCI, AGP and IDE devices. Nothing could boot this computer! So i told the poor guy - it's gotta be the motherboard. It's a shuttle mini PC so I told him basically you're looking at $300 or so including labor to fix, so just get a $400 new Dell PC.

So he got the new PC today and I took the old HD out to recover data. Put it into my external drive caddy, connect it to the new PC, and what happens? Invalid page fault crash! Plugged it into a laptop, invalid page fault!

So! The drive clearly is the problem. Anyone have a suggestion about how to get their data off the drive? It's pretty important stuff.



A:Page fault in nonpaged area, hard drive is the cause, now what?

If you can't connect it to any system without getting fatal errors, I'm afraid the drive and it's data is toast. You might be able to change the hard drives circuit boards and get the drive to run. You would have to find a drive just like the one you have... This is probably an electrical problem and not a mechanical failure. What make is the drive? Most hard drive failures are mechanical
Relevancy 28.38%

hello,i have a problem : my local area connection icon in notification bar apears slowely on starting up my windows (xp sp2) and until it apears i can't see my internet connections and connect to internet. i use an adsl modem is connected with ethernet (lan) cable to my can i fix this problem?

A:slow local area connection icon on startup

How slow?
Check NIC in the device manager for errors.
Check NIC properties and make sure it is all set to automatic.
Turn off the firewall pro tem.
Relevancy 29.24%

Hello some advise would be much appreciated For my daughter getting her grades and into Uni I promised her a good gaming laptop We configured and it duly arrived Within a few hours it locked up and would only start after removing the battery After the windows screen I got the bsod IRQL not less or equal error I was unable to continue even in safe mode to do a system restore send m9750 back? Area-51« and the windows repair failed to change anything I re-formatted and reinstalled all bar nero as I had read incd causes this sometimes So far it has behaved not too well set to laptop power scheme on battery when it turns off the hard drive it will just not awaken If the battery is removed and replaced windows will come up with the options screen and the only way to start is safe mode then system restore and all is ok untill it does it again Am I doing something stupid I Area-51« m9750 send back? know pulling out the battery is bad but have tried all the holding power butten for seconds etc to no avail My daughter would just be unable to use the machine as it is I stupidly never even thought that the battery life would be so poor and the machine would make so much heat Here is Area-51« m9750 send back? the spec Area- m Display quot WideUXGA x LCD with Clearview Technology - Stealth Black Operating System Genuine Windows XP Professional UK with SP - English TV Tuner None Processor Intel Core Duo Processor T GHz MB Cache MHz FSB Graphics Processor Dual MB NVidia GeForce Go GTX - SLI Enabled Memory GB Dual Channel DDR SO-DIMM at MHz - x MB System Drive Single Drive Configuration - GB RPM SATA Optical Drive x Dual Layer DVD -RW x CD-RW Combo with Nero Software Sound Hardware Intel High-Definition Audio -bit Khz with surround sound Keypad Mobile Keypad - English Wireless Network Card Internal Intel PRO Wireless a b g Mini-Card Communications Integrated Mb Gigabit Ethernet amp K V Modem Floppy Drive USB Floppy Drive Bluetooth Integrated Bluetooth Device Warranty AlienCare -Year Free Phone and Collect amp Return Security Software Kaspersky Anti-Virus Personal Professional - month subscription Included Any thoughts much appreciated I have emailed tec support on friday and so far other than the automated response have had no contact nbsp

A:Area-51® m9750 send back?

hell yeah...
its a high end laptop, heat is a "no-wonder" issue i suppose...

btw about the InCD. i got t agree that InCD is sux.
it fail my computer to burn any cd the other day,
which require me to reinstall the windows and reinstall physically (happen to dvd drive in desktop)

in the meantime i suggest you to check the minidump and event viewer if you could get it....
Relevancy 21.5%

Hello all I m having a problem with my Belkin N Wireless Router model F D - I cannot seem to access the internal router s web-based settings and or log-in page and I m looking to see what I can do to get to N1 access Belkin Router page. Cannot Wireless setup these settings My router Cannot access Belkin N1 Wireless Router setup page. s default gateway IP address is and every time I open up a browser to type this in I come to this page There s absolutely nothing relevant on this page I m running Windows Vista and two of my other networked machines run Windows XP and neither machine could access the setup page via the IP address as well Our wireless broadband internet connection is working just fine - I just can t access the router settings Setting up our wireless security port forwarding etc is impossible without getting to this page I have the latest version of Java and Flash installed and my computer is as updated as it can be Any suggestions on what to do would be greatly appreciated - thanks nbsp

A:Cannot access Belkin N1 Wireless Router setup page.

According to my manual, your IP Gateway is, not

Try entering that into the web location in the address bar.
Relevancy 21.93%

Right I have a WRT54G router and recently changed the settings from DHCP to Static IP, this mode not working I decided to reset the router via reset button. Now whenever I try to access the router config page ( hardly any of the text loads etc? And I have tried resetting the router again and installing software again!

Here is link
Any help appreciated!html

A:WRT54G Config. Page not loading???

Sorry Colonel - cannot get at the link.
When you reset the router, you need to hold the button in for at least 15 secs to make sure all the values are reset. If the router refuses to accept the connection it may be faulty - which is probably where you started with this?
Relevancy 30.1%

Recently I ve bought myself a new machine with a pair of Seagate Barracuda s the exact noting is Seagate Barracuda GB ST AS SATA-II MB Cache - OEM I booted it up made a RAID array and installed Vista everything worked perfectly fine However I was advised to now partition off gb specifically for Vista in case I need to or want to format the OS at a later date while keeping all of my data So to do this I deleted the Raid array Straight from the BIOS After this I cannot succeed in getting Vista to boot with or without the Raid - it simply loads up and where it would come to the desktop it crashes out with a split-second Blue Screen of Death installation crashing Vista - at and HDD's RAID after fault? and restarts I ve tried many things and am currently running SeaTools to see if the hard drives have been scuppered by my ill-advised Vista crashing after installation - RAID and HDD's at fault? deletion of the Raid array while Windows was still on it Currently SeaTools is returning nothing but LBA s- not sure what that quite means if anyone could clarify that d be great If there s anything I can do to save my pair of hard drives or if there s any advice anyone can give me as to RAID arrays and Windows Vista then I d be glad to have it- other than that confirmation of my suspicions would be lovely Thanks for your time John EDIT SeaTools has PASSED one hard drive with maximum LBA s after a Long Test - if this helps any to understand better what s going on EDIT No bad sectors found on either hard drive- I m going to try a low-level format from SeaTools to see if that makes any difference SOLUTION FOUND Problem was driver-related The drivers given to me by the company s website did not match my motherboard s drivers a Gigabyte P C range which was causing the crash as I had to load the drivers in the middle of Vista to find the RAID array Even without any RAID array it was still having problems I found the specific driver and successfully installed nbsp
Relevancy 21.93%

I have just recently pissed up my router by setting it to a 'static ip' setting although having done that before I didnt think it would mess up everything. So I have now got it working again, whilst fixing I could access the config. page ( with no problems, but now when I try only the front page loads up with loads of different object missing and text and I cnat change any settings? meaning i cannot change my security to WEP?!

Any help appreciated,

A:Router Config. Page Not Loading??

There is a reset button somewhere on most routers - press it in for 5 seconds.
Relevancy 29.24%

I shut down my computer a few days ago and when I restart it does not connect. I get the following statement, " Local area connnection unpluged via Rhine II Fast Ethernet. However I also get "1394 Connection Connected.
Thus I am able to use my laptop. Any suggestions?


A:Local Area Connection

sounds as if the 1394 adapter (used for Firewire) got bridged to your LAN adapter.

checkout the properties of both in View Network Connections.
Relevancy 30.1%

Greetings My first post here I ve been reading about some other people having m-audio problems and was curious if anyone shares my view on this problem I 1010LT fault + at problems, here? Delta crackles is who IRQ have a Dell Dimension Processor Intel R Pentium R D CPU GHz Processor Speed GHz Memory RAM MB Operating System Microsoft Windows XP Professional Operating System Version The card has massive digital glitching happening whenever Delta 1010LT crackles + IRQ problems, who is at fault here? i try Delta 1010LT crackles + IRQ problems, who is at fault here? to record anything I have switched it between PCI slots and reinstalled the driver Delta 1010LT crackles + IRQ problems, who is at fault here? x times Also reinstalled windows But the card always ends up sharing IRQ s I have the APCI motherboard sigh M-Audio states on their site that the card is compatible with Windows XP but according to Windows XP modern PCI based systems PCI devices and PCI device drivers if in compliance with the PCI specifications are designed to share IRQs Windows itself assumes that they can share IRQs and thus makes no attempt to resolve IRQ sharing conflicts M-Audio insists their card has to have its OWN IRQ and it s not their problem that the OS is doing this I am at the end of my rope here becasue they are insisting that everyone is extremely happy with their M-Audio products and that their products work with XP but if they say that their product works with XP and XP assumes their device can share IRQS and m-audio product doesn t want to share an IRQ aren t they misleading consumers nbsp

A:Delta 1010LT crackles + IRQ problems, who is at fault here?

Sharing IRQ's is standard or default, but you can edit IRQ's to suit... it is risky, as changing IRQ's can change other installs. Read up on the process using a search engine.
Relevancy 31.39%

Hi All,
I have an Asus P4P800S-X, with an intel chip that has suddenly gone dead.
With no monitor on power up and no reset other than pulling the plug and cold booting.

Was working ok up until a week ago when drives started disappearing.
How do I tell if it's the MB or the CPU thats playing up?

Many Thanks

A:CPU or MB fault, which one?


If things started dissaPEARING IT MIGHT BE THE psu, As it starts burning out, it starts losing the ability to deliver the voltage to the drives. I would start by smelling it. I could be wrong but it sounds like that may be the problem!
Relevancy 27.95%

I have a Netgear wgr614 router that is acting strangely. The error message I receive in the sys tray what is in the title of the thread. When the message appears, all 4 port lights are lit up on the router and access to the internet is interupted for a few seconds. This was happening more and more. I have checked the cables etc.
I followed Microsoft's tech article (see below and changed the speed/duplex properties to Force 10 Half Duplex. The problem is starting to come back but not as fast...maybe a half dozen times in an hour as opposed to constantly. Any suggestions?

Thanks, Dan


A:Local area connection error message...a cable is unplugged

You have that lovely error message (NOT!) Yeah, it's a tough one to diagnose.

Did you make sure that your Windows Firewall is disabled? Are you using Norton or any other Internet security package that might contain a firewall that could be on by default?

BTW, did you just setup the router or did this happen out of the blue?
Relevancy 22.36%

Hi, suddenly I can't access the web on my network. I have four, XP pro computers wired to a Linksys AG241 modem/router. All but one, mine, wont access the web or the setup page on The other computers all work perfectly. I can even ping my gateway and but if after enabling the network and trying to go online IE6 tells me 'no connection is currently available'. This fault appears to have happened overnight. Apart from 'pinging' what other tests can I carry out? I spent about an hour 'chatting' and following Linksys advice on settings all to no avail. Please help.

A:Cannot access setup page or the web

can you ping by IP and DNS?
Relevancy 29.24%

(Sorry, not sure if this was the right spot to post this, but...)
I recently received a new modem today from an RCN guy, and its been working great. However, every so often, a bubble would pop up saying my local area connection is unplugged for about a split second. Any ideas on how to stop this?

A:Local Area Connection Unplugged

Is it a modem or a router?

Either way, it could be an issue with the device itself (a firmware update may fix that), the cable (try another cable), your network card being bad (try another one), or some software issue.
Relevancy 25.8%

Have a USB wireless WiFi unit. To connect to the Internet. Have to disable the Local Area Connection. When connected to the Internet. If I enable the Local Area Connection. Unable to connect to the Internet. When I disable the LAC, the Internet connection is restablished. Using a D-Link boradband VPN router.

A:Wireless Network Connection will only connect to Internet if Lcl Area Connect disable

sounds about right! Your big issue will be the VPN, as it is frequently specifically
config'd to use a specific adaptor AND to force all tcp traffic thru that connection,
even though you want to do some trivial search.

Consider using a Hardware Profile to define
1) a LAN connection environment (ie no WiFi)
2) a WiFi environment (w/o a LAN)

the choice occurs at boot time and the hardware is enabled/disabled per
the profile.
Relevancy 28.81%

OMG, please help.I would ask my brother who always fixes things but he isn't here.
I love to go on this one game that is very small and doesn't need much to run.It is called Furcadia..
Everytime I open it, this appears in a bubble on the bottem right.
I can't get it to stop and it disconnects..It does this occasionaly but tonight it was constant and it wont stop.
The internet wouldn't connect or anything for awhile and now it works and I need help on what to do to fix it.
Relevancy 28.81%

Hi guys

I have had this problem for about One year now where my Local Area Connection disconnects randomly and i receive a little pop up saying "Local Area Connection Unplugged". The dissconection only lasts one or two second then my internet is back and also it only happens once or twice every hour or sometimes does not happen for 5 hours or even a whole day. My router is D-link. Do you guys think that this problem has something to do with the router or could it be my computer or both?

A:Local Area Connection Unplugged Blinking.

It could be bad network cable, bad network interface or just your ethernet chip and the router's ethernet chip not liking each other.

First, try setting the link speed and duplex manually to 100Mbit full duplex in your network card properties. Ethernet speed autonegotiation is not perfect and often breaks. If that doesn't help, replace your network cable.
Relevancy 28.81%

Hi guys I still have this problem please help I have pcs desktops amp laptop Router Model no XWL- GRAR I have an X-Micro Router I sent the first one back now on the second unit x-micro also say there is no firmware to install for this unit its to new PC amp PC are hard wired into the router both are O S win k AVG anti virus The laptop is wireless O S win XP home amp norton anti virus Everything works fine until I shut down the laptop Then the trouble starts A bubble appears bottom right says local area connection unplugged This happens Every Seconds it Re-Connects amp then disconnects on both desktop pcs at the same time If I restart the laptop the connection is cable network unplugged area local is then stable again on all pcs This is what i have done so far sent the router back and recieved replacement still no good checks done are - plug in pc hard wired result it disconnects then reconnects every secs plug in pc hard wired result it disconnects then reconnects every secs plug in laptop it works local area network cable unplugged fine ok no problem So this points to O S or the anti virus system ON pc amp being the problem but if it is why does every thing work correctly on pc amp while ever the laptop is local area network cable unplugged connected ive been trying to sort this out since xmas can any body help please note this bubble pops up every secs On PC amp Even when the router is unplugged from the modem please also note That pc amp pc work correctly when plugged directly into the modem and never disconnect SO as its Hard wired I would have thought it should still work Just like an extention lead what can i do Does anyone out there have an X - MICRO ROUTER on Win K nbsp

A:local area network cable unplugged

boy, this stinks! I would look for another manufacture's product!

disconnecting one device should not effect the others on that same router -- EVER!

(of course all others lose their print/file shares to the disconnected system :knock
Relevancy 22.36%

Hey, so I've been reading some things about page files and I found this really interesting/confusing. My system has been acting a little, weird. When I start up my computer my page file usage is really low, as it should be. But when I start to play games after I'm done playing them my page file is suddenly huge, it seems like its keeping information and letting very little go away. My computer has been giving me BSOD's frequently after starting 3 or 4 games, and im thinking its related to this page file. Would turning it off solve my problem or is there more to this that I don't know.


A:Page File issue?

set it to a FIXED size ~2x your real ram. This will improve performance too
as it STOPs the PF expansion process and wasted I/O
Relevancy 83.85%

Hey Folks,

I get the good old blue screen when running a video editing software STUDIO 10.7


I have a nice new Dell Inspiron 6400 with dual Intel T2050 1.60GHz CPUs, 1GB of RAM. I not sure on how to post the message but I try somehow.

Can someone please help me with this???

I thank you all in advance. *dmp file is attached*



Hello and welcome to Techspot.

Your minidump crashes at HSFHWAZL.sys. This is your 56k modem driver.

If you don`t use a 56k modem, uninstall it. If you do use it, check for any updated drivers. See HERE for info.

Regards Howard :wave: :wave:
Relevancy 29.24%

Hi im still having problems with my router x micro (os-win2k-pro) every few mins it says local area connection 2 network cable unplugged ! this happens even when im trying to connect two computers via the router using ethenet cables (hard wired) can any one help please !

A:area network cable unplugged

Sounds like the router is on it's way out. I had the same problem recently.Also, sometimes killing the power to the router will reset it. It's worth a try before you buy a new one.
Relevancy 22.36%

Time to dispel some rumors! I just built a new system and I've got 2GB of PC3200 RAM installed -- plenty o' RAM to go around (It's an ASUS A8N-SLI Premium w/ AMD Athlon 64 4000+, 320GB Seagate SATA). After getting everything to function (drivers, etc. etc.) I'm left with naught but the page file. Now, I've heard some dirty rumors in the past about definitely setting the page file (1.5 times the amount of RAM, etc. etc.) but don't put much stock in it so far. :haha:

Currently I've got it set to automatic page file settings (i.e. windows selects the appropriate page file size) -- is this an optimum memory setting? Should I set it to something manual or just leave it at system settings?

A:Page File Size?

I've never noticed much difference no matter where I have it. If I were you I'd disable it entirely and see if you run into any problems, if not there you go, thats about as optimal as it will ever get.
Relevancy 22.36%

okay , so my cousin called me up and told me his internet wil not work. I tought maybe its his modem since i had a similar prob with this same modem from sbc att. So i tought if he puts my old modem it will work ( now i got a wireless one from sbc) so the internet worked. But now he called me up last week telling me internet doesnt work anymore. I tried SYS Restore, but nothing.

Tryed schanging with new ethernet card, nope.

It acquires network adress and connects with modem but no page display.

Tried turning off windows firewall, but same.


otherwise im just gonna reformat his HD and reinstall everyithing.


A:This Page Cannot Be Displayed?

reformatting without knowing where the problem originates from is inadvisable and may create more problems than a 'quick' (read: 40 minute reinstall of windows xp, minus programs) fix. This should be your last resort.

Have a read of this:

-Modem plugged in via the USB or Ethernet?
-disconnect all other devices (if ADSL 1/2/2+) from the phone plug except the modem - phones, fax etc.
-disable your firewall(s) temporarily.
-check connection settings in IE and network connections are correct.
-check the service status over at your ISP in your/their area
-check the lights are dancing to the correct rhythm..
-user name and passwords correct?
-even on a well known website like google no ping?
-open up start >run and type in cmd then type in tracert where yourisphomepage is the home address of your ISP. See where it times out.