Windows Support Forum

Frequent BSODs in CS:CZ, page fault

Q: Frequent BSODs in CS:CZ, page fault

Hi Stumbled upon this forum when researching a frequent BSOD which occurs when playing Counter-strike Condition Zero The BSOD originally showed up as a page fault in nonpage area caused by win k sys When crashing the sound locks up display goes bad and then displays the BSOD After researching this problem some measures were taken to resolve the issue by updating drivers which initially was quite promising with no crash but after half an hour or so a new BSOD occured this time the page fault in nonpaged area Frequent CS:CZ, page in BSODs fault is said to be caused by Dnetr u sys which should be associated with my Wifi USB adapter from D-Link Memory tests have been run Memtest and windows own not that extended tests though and shows no errors My system Windows Vista SP Gigabyte FX-DS North Bridge AMD FX South Bridge AMD SB Realtek ALC A codec AUDIO Realtek B chip LAN Athlon X x gb hard-drives running in mirrored RAID D-Link DWA- Rangebooster Wifi USB adapter latest driver Sapphire HD Graphics card latest catalyst Click to expand When trying to update the system drivers through the gigabyte home page there seems to be a problem installing the quot north bridge filter driver quot this one comes up as not being of the current version when the install Frequent BSODs in CS:CZ, page fault manager analyzes the system after installing the same driver And the Frequent BSODs in CS:CZ, page fault debugged crash dump PAGE FAULT IN NONPAGED AREA Invalid system memory was referenced This cannot be protected by try-except it must be protected by a Probe Typically the address Frequent BSODs in CS:CZ, page fault is just plain bad or it is pointing at freed memory Arguments Arg aa ea memory referenced Arg value read operation write operation Arg c If non-zero the instruction address which referenced the bad memory address Arg reserved Debugging Details ------------------ Page a b not present in the dump file Type quot hh dbgerr quot for details READ ADDRESS aa ea FAULTING IP Dnetr u c c b ffffff mov edx dword ptr ebp- BCh MM INTERNAL CODE IMAGE NAME Dnetr u sys DEBUG FLR IMAGE TIMESTAMP a c MODULE NAME Dnetr u FAULTING MODULE Dnetr u DEFAULT BUCKET ID VISTA DRIVER FAULT BUGCHECK STR x PROCESS NAME hl exe CURRENT IRQL TRAP FRAME aa c -- trap xffffffffaa c ErrCode eax f c b ebx ecx edx esi dbf e edi b eip c esp aa cd ebp aa f iopl nv up ei ng nz ac pe nc cs ss ds es fs gs efl Dnetr u x c c b ffffff mov edx dword ptr ebp- BCh ss aa ea Resetting default scope LAST CONTROL TRANSFER from bf to dd STACK TEXT aa c c bf aa ea nt MmAccessFault x a aa c c c aa ea nt KiTrap E xdc WARNING Stack unwind information not available Following frames may be wrong aa d c c b ff aa da Dnetr u x c aa d c fadc f e hal KfLowerIrql x aa db c c fd f e x fadc aa dcc c b fd aa dec hal HalpCheckForSoftwareInterrupt x aa ddc f b a f e aa e hal KfLowerIrql x aa de a f e aa e f hal KfReleaseSpinLock xb aa dec f f dd dd USBPORT USBPORT ReleaseEpListLock x aa e d d c c USBPORT USBPORT TxCsqReleaseLock x aa e c dca b a nt IoCsqInsertIrpEx x aa f dc c b fsdfw x b aa f c e e fsdfw x c aa fe c e a ad Dnetr u x c aa b c e b ac Dnetr u x c aa dbf e b ac ndis ndisMSendNBLToMiniport xb aa a b ac b ac ndis ndisFilterSendNetBufferLists x b aa b afa b ac ndis NdisFSendNetBufferLists x aa a b aa c aa c nwifi Dot OnDisassociate x aa ebf a ad nwifi Dot FlushIntermediateSendQueue x aa ec nwifi MP SendNBLInternal xe aa c c a ad nwifi MP Send x aa a afb a ad nwifi FilterSendNetBufferLists x aa c a a ad a ad ndis ndisFilterSendNetBufferLists x b aa dc d c a ad ndis NdisFSendNetBufferLists x aa fc e a ad anodlwf x c aa c a a ad a ad ndis ndisFilterSendNetBufferLists x b aa d f ab a c a ad ndis NdisFSendNetBufferLists x aa b e f a ad pacer PcFilterSendNetBufferLists x aa cc b a a ad a ad ndis ndisSendNBLToFilter x aa f c ce a ad ndis NdisSendNetBufferLists x f aa c ac tcpip FlSendPackets x aa c cbb cc ca tcpip IppFragmentPackets x aa b c ab cc ca aa cc c tcpip IppDispatchSendPacketHelper x aa c f a cc aa f e tcpip IppPacketizeDatagrams x fd aa b c bf e cc ca tcpip IppSendDatagramsCommon x aa d c e b f aa e f tcpip IpNlpSendDatagrams x b aa c f aa f e tcpip IppSlowSendDatagram x aa b c cd f aa tcpip IpNlpFastSendDatagram x f aa a cc f ca a d f tcpip UdpSendMessages xb aa a cdef b b aa a b b afd AfdTLSendMessages x aa a cded b b f edf c afd AfdTLFastDgramSend x d aa ae cd d b b aa b c afd AfdFastDatagramSend x ac aa c ac a d afd AfdFastIoDeviceControl x c aa d eb d b b nt IopXxxControlFile x cf aa d fa a b nt NtDeviceIoControlFile x a aa d f a b nt KiFastCallEntry x a d x f a STACK COMMAND kb FOLLOWUP IP Dnetr u c c b ffffff mov edx dword ptr ebp- BCh SYMBOL STACK INDEX SYMBOL NAME Dnetr u c FOLLOWUP NAME MachineOwner FAILURE BUCKET ID x Dnetr u c BUCKET ID x Dnetr u c Followup MachineOwner ---------Click to expand nbsp

Relevancy 100%
Preferred Solution: Frequent BSODs in CS:CZ, page fault

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Frequent BSODs in CS:CZ, page fault

Updated chkdsk

Update: Ran check disk, and this is what it returned, nothing critical from what I can understand atleast.




Windows will now check the disk.
253760 file records processed. 1117 large file records processed. 0 bad file records processed. 2 EA records processed. 44 reparse records processed. 312692 index entries processed. 0 unindexed files processed. 253760 security descriptors processed. Cleaning up 5984 unused index entries from index $SII of file 0x9.
Cleaning up 5984 unused index entries from index $SDH of file 0x9.
Cleaning up 5984 unused security descriptors.
29467 data files processed. CHKDSK is verifying Usn Journal...
33841240 USN bytes processed. Usn Journal verification completed.
CHKDSK is verifying file data (stage 4 of 5)...
253744 files processed. File data verification completed.
CHKDSK is verifying free space (stage 5 of 5)...
12634413 free clusters processed. Free space verification is complete.
CHKDSK discovered free space marked as allocated in the
master file table (MFT) bitmap.
CHKDSK discovered free space marked as allocated in the volume bitmap.
Windows has made corrections to the file system.

156268543 KB total disk space.
105240324 KB in 220102 files.
122004 KB in 29468 indexes.
0 KB in bad sectors.
368559 KB in use by the system.
65536 KB occupied by the log file.
50537656 KB available on disk.

4096 bytes in each allocation unit.
39067135 total allocation units on disk.
12634414 allocation units available on disk.Click to expand...

http://www.techspot.com/community/topics/frequent-bsods-in-cs-cz-page-fault.155036/
Relevancy 102.34%

Hi,
Over the last couple of months I have been getting BSODs of a variety of types. The last two I recorded were IRQL not less or equal (when disconnecting the external monitor) and Page fault in nonpaged area (when connecting the monitor). I am not sure whether connecting/disconnecting the monitor is relevant, as previous times I got BSODs without that (e.g. system service exception). A number of the times were when I restarted the computer. I am attaching shots I took of the screen on my iphone. Apologies for the quality.
Similarly, I did not understand from the instructions how to "save the information into a debug-YourComputerName-xxxx.zip file on your desktop". I hope have attached the right thing.
Thanks for you help!

A:Frequent BSODs: Page fault in nonpaged area, IRQL not less or equal

Hi violapower.

Install Service pack 1 and all other windows updates. Otherwise the system will remain vulnerable to threats.

Code:
Windows 7 Kernel Version 7600 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.17273.amd64fre.win7_gdr.130318-1532
Learn how to install Windows 7 Service Pack 1 (SP1)
Service Pack and Update Center - Microsoft Windows

Report us for any further BSOD.

http://www.sevenforums.com/bsod-help-support/328084-frequent-bsods-page-fault-nonpaged-area-irql-not-less-equal.html
Relevancy 83.85%

Right now my computer seems quot stable quot but for several days I was having incredible difficulty SF BSODs diagnostic etc. Frequent fault? at Motherboard getting the computer to operate without BSOD or rejecting the BIOS settings etc I recently got a new Frequent BSODs etc. Motherboard at fault? SF diagnostic graphics card PSU Frequent BSODs etc. Motherboard at fault? SF diagnostic and memory I memtested the memory and it's fine this is my second set since the first set brought similar crashes did not memtest first set though I doubt the graphics card or PSU are issues Frequent BSODs etc. Motherboard at fault? SF diagnostic either but who knows I suspect some of the RAM slots on the motherboard may be at fault because when I re-arrange the RAM or place one stick in particular slots the system will not boot Anyways attached are the diagnostic files from the SF tool Like I said the system runs quot okay quot now but not where I want it to as far as dependability If I get more BSODs I will definitely come back with updated dump files I'm not good at figuring out dump files and event logs so if anybody could interpret the attached information for me I would really appreciate it Thanks My system A-POWER W PSU Intel Core i - processor GIGABYTE P -UD L motherboard Windows Ultimate -bit OS G SKILL GB x GB PC DDR RAM ATI RADEON HD GB graphics card

A:Frequent BSODs etc. Motherboard at fault? SF diagnostic

  
Quote: Originally Posted by splexin


Right now, my computer seems "stable" but for several days I was having incredible difficulty getting the computer to operate without BSOD or rejecting the BIOS settings etc

I recently got a new graphics card, PSU, and memory. I memtested the memory and it's fine (this is my second set since the first set brought similar crashes...did not memtest first set though). I doubt the graphics card or PSU are issues either, but who knows. I suspect some of the RAM slots on the motherboard may be at fault because when I re-arrange the RAM or place one stick in particular slots, the system will not boot.

Anyways, attached are the diagnostic files from the SF tool. Like I said, the system runs "okay" now but not where I want it to (as far as dependability). If I get more BSODs, I will definitely come back with updated dump files.

I'm not good at figuring out dump files and event logs, so if anybody could interpret the attached information for me, I would really appreciate it.

Thanks.

My system:
A-POWER 750W PSU
Intel Core i5-750 processor
GIGABYTE P55-UD3L motherboard
Windows 7 Ultimate (64-bit) OS
G.SKILL 4 GB (2 x 2GB) PC12800 DDR3 RAM
ATI RADEON HD 5830 (1GB) graphics card



These 3 crashes were caused by three different files. When there are that many different problems I have to start thinking hardware, probably memory.

I would start by downloading memetestx86 and run it for at least 5 passes. Let us know the results

If you are overclocking STOP

Ken

Code:
041910-14476-01.dmp 4/19/2010 11:39:12 PM BAD_POOL_HEADER 0x00000019 00000000`00000003 fffff800`0384be70 0ffff800`0384be70 77fff800`0384be70 discache.sys discache.sys+80bfa3 x64 C:\Users\K\Desktop\Seven Forums\Minidumps\041910-14476-01.dmp 4 15 7600
041910-19687-01.dmp 4/19/2010 1:36:40 PM KMODE_EXCEPTION_NOT_HANDLED 0x0000001e 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 mouhid.sys mouhid.sys+1aff808 x64 C:\Users\K\Desktop\Seven Forums\Minidumps\041910-19687-01.dmp 4 15 7600
041910-19344-01.dmp 4/19/2010 1:15:18 PM SYSTEM_SERVICE_EXCEPTION 0x0000003b 00000000`c0000005 fffff960`000c8ead fffff880`021cfc10 00000000`00000000 ntoskrnl.exe ntoskrnl.exe+70600 x64 C:\Users\K\Desktop\Seven Forums\Minidumps\041910-19344-01.dmp 4 15 7600

http://www.sevenforums.com/bsod-help-support/79858-frequent-bsods-etc-motherboard-fault-sf-diagnostic.html
Relevancy 78.69%

Hi I have a computer as described in my profile and ive had it Random fault Page Frequent non but BSOD paged in : area for Random but Frequent BSOD : Page fault in non paged area about a year now about months ago i occasionally got BSOD and ignored it Then i upgraded the ram to gb was origionally gb and it was great ran so smooth but recently ive been getting this BSOD more and more frequent and now Random but Frequent BSOD : Page fault in non paged area the pc is quite unuseable i searched up online and found that it could be software ram or hardrive most probably so first i tried a factory restore and still got bsod and freezes then i tried factory restore once more no luck then i downloaded a home premium iso installed that and it appeared to be working then that started doing it next i tried Ram first i downgraded it to gb then swapped it back to the gb it came with none of this helped now i think it must be the harddrive or something wrong with the motherboard but if anyone could give me any tips or pointers it would be greatly appreciated since ive spent about on this pc now O and since i cant use it atm im quite off Ps the blue screen error message is quot Page fault in non paged area quot every time if any more info is needed just ask and i will do my best to provide thanks again

A:Random but Frequent BSOD : Page fault in non paged area

Quick note: just read about dump files i will sort that out tomorrow as i cant get on that pc right now

Edit: ok i tried to get the dump files and the pc bluescreened doing that so it looks like i cant even do that :/

REEDIT: ok i made the dump file thing work and they are now attached


Attachment 191532

Basic Specs:
64 bit Amd Phenom II X6 1035t
Did have origional os installled but now reformatted with a cd
its a bout a year old and the install is only days old

http://www.sevenforums.com/bsod-help-support/206234-random-but-frequent-bsod-page-fault-non-paged-area.html
Relevancy 78.69%

Getting this one a lot Never have before Started a couple weeks ago but would only happen infrequently Now I can't have my computer on for more than non frequent fault area Page random paged in crashing a few minutes I have Page fault in non paged area random frequent crashing made no known Page fault in non paged area random frequent crashing driver or hardware changes in that time period I recently a month ago installed a new graphics card MSI Radeon x and all recommended drivers and soft bloat ware that came with the mfg disk Although it will crash seemingly at random I can with near certain reliability cause it to crash by attempting to run Max Payne of the time it will immediately crash If it opens it doesn't crash during play Strange It didn't do this as much a week ago Searching around the net I have tried the following Tried RAM sticks separately individually Changed out RAM for confirmed working RAM Changed RAM slots in motherboard Not a RAM problem Put in spare graphics card Not a GFX problem Ran chkdsk --- f r Not a HDD problem Must be software related I think it's related to the new graphics card MSI Radeon x since I -never- had this problem before installing it although I did not immediately have this problem either and it has -increased in frequency- over the past few days to where I can't even have my computer on for more than a few minutes without it crashing Likely a graphics driver problem but I'm having trouble ensuring all old drivers are eliminated and installing different ones since I'm not sure which would be likely to work and the computer crashes too frequently to reliably install something It also increased in frequency upon installing Max Payne a week ago I don't think this has much to do with it Coincidental or just symptomatic I will post bug report as requested in the sticky once I can get it to complete successfully on my main computer

A:Page fault in non paged area random frequent crashing

Install Service pack 1 and all other windows updates. Otherwise the system will remain vulnerable to threats including BSODs.

Code:
OS Name Microsoft Windows 7 Ultimate
Version 6.1.7600 Build 7600
Learn how to install Windows 7 Service Pack 1 (SP1)
Service Pack and Update Center - Microsoft Windows

Also Test your RAM modules for possible errors. How to Test and Diagnose RAM Issues with Memtest86+
Run memtest86+ for at least 8 consecutive passes.

If it start showing errors/red lines, stop testing. A single error is enough to determine that something is going bad there.

Let us know the result.
__________________________________

Code:
BugCheck 50, {fffff8a008566000, 0, fffff80003155079, 0}
Could not read faulting driver name
Probably caused by : memory_corruption ( nt!MiCompressRelocations+70 )

Followup: MachineOwner
---------

http://www.sevenforums.com/bsod-help-support/358672-page-fault-non-paged-area-random-frequent-crashing.html
Relevancy 77.83%

Hi,

since a while my Laptop gets a blue Screen several times a week, Messaging: PAGE_FAULT_IN_NONPAGED_AREA.

Latest dumps as per attachment.

How to recover from this?

Please help.

Thanks,
Alex

A:Satellite C70D PAGE FAULT IN NONPAGED AREA - frequent BSOD

I also get this error sometimes, all my BSODs can be found here - http://answers.microsoft.com/en-us/w...7866#LastReply
Most of the drivers are probably outdated and not for Windows 10.. For example my BSODs are caused by Atheros Qualcomm AR8171 driver..
BUMP...

https://forum.toshiba.eu/showthread.php?89830-Satellite-C70D-PAGE-FAULT-IN-NONPAGED-AREA-frequent-BSOD
Relevancy 77.83%

I have a 2007 HP Pavilion that originally had Vista and I started getting BSOD and most were related to ntkrnlpa.exe. I erased the hard drive and updated to Windows 7 professional the other day but the blue screens continue.

I've uploaded the zip file generated from the SF diagnostic tool. HOpefully somebady can assist with the issues.

THanks,
Kevin

A:Frequent BSOD, Memory Management, Page Fault, Driver IRQL, etc..

Welcome to SevenForums

Test your hard drive: Hard Drive Diagnostic Procedure
Run Disk Check on your hard disk for file system errors and bad sectors on it: Disk Check
Test your ram sticks RAM - Test with Memtest86+

Keep us posted

http://www.sevenforums.com/bsod-help-support/263358-frequent-bsod-memory-management-page-fault-driver-irql-etc.html
Relevancy 77.83%

Any help is greatly appreciated. dm collector file attached

A:Page Fault in Non Paged area + frequent spontaneous shut downs

Welcome to the forum dosirius,

Make sure your dump logging is enabled.





Quote:
Click Start, point to Settings, and then click Control Panel.
Double-click System.
Click the Advanced tab, and then click Settings under Startup and Recovery.
Check Write an even to the system log, and Automatically restart.
In the Write debugging information list, click Small memory dump (256k).
Location of Dumps:
C:\Windows\minidump

http://www.sevenforums.com/bsod-help-support/339355-page-fault-non-paged-area-frequent-spontaneous-shut-downs.html
Relevancy 76.97%

Hi everyone I'm new here and I came to get some STOP frequent BSOD Page Windows 0x050 area fault in nonpaged 7 help with a really annoying BSOD problem I'm having in Windows Ultimate STOP 0x050 Page fault in nonpaged area frequent BSOD Windows 7 It happens very frequently like once every - hours It comes up with the message STOP x PAGE FAULT IN NONPAGED AREA and the cause is fvevol sys which from what I gathered in Event Viewer is related to volmgr I did some tests on RAM without any errors showing up and even virus spyware scans without any serious results Details OS -Windows Ultimate x -bit What was original installed OS on system Before Win I had XP SP Installed OEM version came pre-installed on system or full retail version Retail Age of system - years approx Age of OS installation - months approx CPU-AMD Athlon X GhZ Video Card-Galaxy MB Nvidia GeForce GT MotherBoard-Gigabyte GA-MA -S P AM Chipset Power Supply - W CoolerMaster eXtreme Power Duo PSU I've attached the TSF Folder but I couldn't get that monitor program working Seems to just get stuck on collecting data waited for mins and nothing Any help would be greatly appreciated since this problem has rendered my PC almost unusable

A:STOP 0x050 Page fault in nonpaged area frequent BSOD Windows 7

I should add that when I check the Event Viewer to see what the problem was, I see volmgr as the cause and the error message it gives me is "could not successfully load the crash dump driver". Aside from that I've been having other symptoms but I don't know if they're related. Sometimes Win 7 just hangs on the Shutdown screen or it refuses to read discs and Windows Explorer just hangs after disc insertion(only way to read discs is to have them inserted on bootup).I don't know if that helps but this leads to me believe that it's related to my HDDs and/or my RAID.

http://www.techsupportforum.com/forums/f299/stop-0x050-page-fault-in-nonpaged-area-frequent-bsod-windows-7-a-476551.html
Relevancy 76.11%

Hello all,

So, as I mentioned in title, I recently started getting BSODs with a few different errors very, very frequently and I can't figure out what's causing them, but I'm almost positive it's hardware-related now. I've done two clean installs of Windows, cleared CMOS and checked my BIOS settings, checked to see if all my peripherals are working correctly, and so on with no luck in finding the cause. Before I go to all the trouble of testing my RAM, I've come to you all, the experts of these wonderful forums, for help in analyzing these logs in case it's possible to figure out what the problem is, specifically, just from those. Any help you can provide will be greatly appreciated. Thanks!

http://www.tenforums.com/bsod-crashes-debugging/47203-bsods-page-fault-kernel-security-other-fun-stuff.html
Relevancy 76.11%

Hi,

Last night had a BSOD on shutdown (don't know the error code), then this morning two more BSODs (one IRQL_NOT_LESS_OR_EQUAL and the other PAGE_FAULT_IN_NONPAGED_AREA)

Chrome keeps giving me 'Aw Snap' errors this morning.

No new hardware recently. Nor driver changes. Was custom build before Christmas, no issues up til now.

Dump data attached.


Any help much appreciated!!

A:Multiple BSODs (IRQL and Page Fault codes)

IRQ and Pagefile errors to BSOD are in my experience RAM-related. You might have dodgy/overheated memorychips even if they return no errors in individual testing, alternatively you might have different types of ram. This usually requires bios to set different voltages that some (older) motherboards would seem to have issues with, MSI in particular.

Try booting with one memchip only and see if that helps, if not, replace it with the next one and so on... worked for me at least.

Cheers-

http://www.sevenforums.com/bsod-help-support/333251-multiple-bsods-irql-page-fault-codes.html
Relevancy 76.11%

Dont know reason, i get random crashes "page fault in nonpaged area". Please help..

XN4-07-02-2015_204938,81.zip

A:random bsods - page fault in nonpaged area

Update drivers in red and uninstall Asus bloatware, disable nVidia Kernel Streaming service. Run SFC: SFC /SCANNOW Command - System File Checker - Windows 7 Help Forums


Code:
AsUpIO.sys Tue Aug 3 04:47:59 2010 (4C57835F)
ASUS hardware monitoring software related
http://www.carrona.org/drivers/driver.php?id=AsUpIO.sys

ICCWDT.sys Wed Aug 18 10:27:45 2010 (4C6B9981)
IIntel(R) Watchdog Timer Driver
http://www.carrona.org/drivers/driver.php?id=ICCWDT.sys

ASUSFILTER.sys Tue Sep 20 17:46:33 2011 (4E78B559)
ASUS USB Hub filter driver
http://www.carrona.org/drivers/driver.php?id=ASUSFILTER.sys

AiCharger.sys Thu Mar 22 09:07:51 2012 (4F6ADDD7)
Asus Charger Driver [br] Likely BSOD cause - haven't seen recently (15Jan2013)
http://www.carrona.org/drivers/driver.php?id=AiCharger.sys

VBEngNT.sys Tue Apr 24 18:26:02 2012 (4F96D41A)
Virus Buster
http://www.carrona.org/drivers/driver.php?id=VBEngNT.sys

dhxubdzd.vbt Fri Jul 20 01:36:43 2012 (50089A0B)

dhxubdzd.vbt - this driver hasn't been added to the DRT as of this run. Please search Google/Bing for the driver if additional information is needed.

8k4pmse0.vbt Fri Jul 20 01:36:43 2012 (50089A0B)

8k4pmse0.vbt - this driver hasn't been added to the DRT as of this run. Please search Google/Bing for the driver if additional information is needed.

6e2fwq82.vbt Fri Jul 20 01:36:43 2012 (50089A0B)

6e2fwq82.vbt - this driver hasn't been added to the DRT as of this run. Please search Google/Bing for the driver if additional information is needed.

0so5uwyc.vbt Fri Jul 20 01:36:43 2012 (50089A0B)

0so5uwyc.vbt - this driver hasn't been added to the DRT as of this run. Please search Google/Bing for the driver if additional information is needed.

hxdebpzt.vbt Fri Jul 20 01:36:43 2012 (50089A0B)

hxdebpzt.vbt - this driver hasn't been added to the DRT as of this run. Please search Google/Bing for the driver if additional information is needed.

i5njspbo.vbt Fri Jul 20 01:36:43 2012 (50089A0B)

i5njspbo.vbt - this driver hasn't been added to the DRT as of this run. Please search Google/Bing for the driver if additional information is needed.

px9qnx39.vbt Fri Jul 20 01:36:43 2012 (50089A0B)

px9qnx39.vbt - this driver hasn't been added to the DRT as of this run. Please search Google/Bing for the driver if additional information is needed.

1xpaf9n1.vbt Fri Jul 20 01:36:43 2012 (50089A0B)

1xpaf9n1.vbt - this driver hasn't been added to the DRT as of this run. Please search Google/Bing for the driver if additional information is needed.

qeub4ywy.vbt Fri Jul 20 01:36:43 2012 (50089A0B)

qeub4ywy.vbt - this driver hasn't been added to the DRT as of this run. Please search Google/Bing for the driver if additional information is needed.

eeabwq8e.vbt Fri Jul 20 01:36:43 2012 (50089A0B)

eeabwq8e.vbt - this driver hasn't been added to the DRT as of this run. Please search Google/Bing for the driver if additional information is needed.

kf99inli.vbt Fri Jul 20 01:36:43 2012 (50089A0B)

kf99inli.vbt - this driver hasn't been added to the DRT as of this run. Please search Google/Bing for the driver if additional information is needed.

jrjc5b17.vbt Fri Jul 20 01:36:43 2012 (50089A0B)

jrjc5b17.vbt - this driver hasn't been added to the DRT as of this run. Please search Google/Bing for the driver if additional information is needed.

rjj6h1dj.vbt Fri Jul 20 01:36:43 2012 (50089A0B)

rjj6h1dj.vbt - this driver hasn't been added to the DRT as of this run. Please search Google/Bing for the driver if additional information is needed.

1x52fhjl.vbt Fri Jul 20 01:36:43 2012 (50089A0B)

1x52fhjl.vbt - this driver hasn't been added to the DRT as of this run. Please search Google/Bing for the driver if additional information is needed.

55lijxbx.vbt Fri Jul 20 01:36:43 2012 (50089A0B)

55lijxbx.vbt - this driver hasn't been added to the DRT as of this run. Please search Google/Bing for the driver if additional info... Read more

http://www.eightforums.com/bsod-crashes-debugging/61246-random-bsods-page-fault-nonpaged-area.html
Relevancy 76.11%

Hey all I built my computer last August and since then it has been running wonderfully except for recurring BSODs The most common message on the BSODs is quot Page fault in nonpaged area quot The BSODs happen occasionally but seem to be more frequent of late which means fixing in Recurring area nonpaged fault BSODS; page them is Recurring BSODS; page fault in nonpaged area a priority They happen when Recurring BSODS; page fault in nonpaged area I am using programs -- Photoshop Firefox or Chrome games etc Never had one happen when it's just on the desktop I am running Win Professional x I got it through the MSDNAA Microsoft Developers Network Academic Alliance Everything on this computer is new as of August Further system specs are in my profile I've attached the report and dump report as per the posting instructions If any more information is needed I will provide it to the best of my ability Thank you all Edit I am behind an update or two I think I just plugged my computer in for the first time in three or four weeks I can install updates before proceeding if necessary

A:Recurring BSODS; page fault in nonpaged area

The latest dump shows "aswMonFlt.sys" as the possible cause. That is an Avast system driver.

http://www.sevenforums.com/bsod-help-support/213583-recurring-bsods-page-fault-nonpaged-area.html
Relevancy 76.11%

Hi everyone i was told to come here from tomshardware to have some help looking into my minidumps heres a link to the thread + Errors Mem BSODS Memtest Management,Page fault to see what's been done Mem Management,Page fault BSODS + Memtest Errors Link Heres the situation Running a Homebuilt PC with gb x gb ram sticks Crucial Ballistix sport GB -Pin DDR SDRAM DDR PC Desktop Memory Model BLS G D DS S Mobo is msi g Not until recently did i find out that this kit that was sold to me from microcenter isn't actually a kit it's just separate gb sticks slapped together and called a kit not sure that matters Got my first BSOD a month or two ago ignored it but then it started to happen maybe - times a day and finally got fed up and seeked help i looked around and saw that it may be things Driver issue Bad ram Voltage issue So i updated all my drivers still get the BSODs i ran memtest on the sticks individually on all the DIMMs and the passed but when running memtest together i get errors so to me it seems its something else probably something with compatibility What i've tried so far to remedy the situation is increasing the DIMM and CPU-NB voltage by twice first time i got a BSOD within the first hour nd time it took days for the next BSOD any help is appreciated thanks btw im watching this thread like a hawk so i'll reply very quickly dumps are attached thanks again

A:Mem Management,Page fault BSODS + Memtest Errors

heres a pic of my cpu-z spd tab i forgot to mention i've run prime95 and aida64 bench tests and didnt get any bsods or anything....

and i've also run the basics like system scans and chkdsks...

http://www.sevenforums.com/bsod-help-support/257875-mem-management-page-fault-bsods-memtest-errors.html
Relevancy 76.11%

Hi I've been researching the root of my BSODs for what seems like forever and I feel like I'm banging my head Page errors Random BSODS sporadic. - Fault Often against a brick wall I'm running an overclocked system and sporadically receive BSODs which are either pagefault errors or PFN corrupt errors I've tried running the driver verification tool but it would BSOD while booting windows - however I do have a crash dump from that but haven't the ability to read it yet I ran the windows memory checker utility which came up clean I haven't run memtest yet - I don't have a writeable disc or USB drive to hand to be able to create the boot disc I've included crash reports for your browsing pleasure The BSODs often happen when windows is shutting down but that is the only common thread - other crashes are Random BSODS - sporadic. Often Page Fault errors seemingly random anything from browsing the web on chrome or in the middle Random BSODS - sporadic. Often Page Fault errors of a Battlefield session Any and all help will be gratefully accepted and if I need to provide any more details then of course I will Thanks

A:Random BSODS - sporadic. Often Page Fault errors

Hi -

Overclocking can cause all sorts of problems. If you are overclocking your system, please return all overclocked components to their stock speeds. If the BSOD's are found not to be caused by the overclock, you can re-overclock the components once we have finished the diagnostics.

Please upload your msinfo32.nfo file. To get this: Start Menu -> Type msinfo32 into the Search programs and files box -> When it opens, go to File, Save -> Save as msinfo32.nfo and save in a place you will remember -> Let it finish the process of gathering and saving the system info -> Right click the .nfo file, click send to compressed (zipped) folder -> Upload the .zip file here.

Please upload your msinfo32.txt file. To get this: Start Menu -> Type msinfo32 into the Search programs and files box -> When it opens, go to File, Export -> Save as msinfo32.txt and save in a place you will remember -> Let it finish the process of gathering and saving the system info -> Right click the .txt file, click send to compressed (zipped) folder -> Upload the .zip file here.

Please disable driver verifier for the time being.Driver Verifier Enable/Disable
Update the Etron USB 3.0 Extensible Hub Driver to the latest version available.

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1000009F, {4, 258, fffffa8006789b50, fffff800060e33d0}

*** WARNING: Unable to verify timestamp for EtronHub3.sys
*** ERROR: Module load completed but symbols could not be loaded for EtronHub3.sys
Implicit thread is now fffffa80`06789b50
*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
Probably caused by : EtronHub3.sys ( EtronHub3+5f51 )

Followup: MachineOwner
---------

0: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

DRIVER_POWER_STATE_FAILURE (9f)
A driver has failed to complete a power IRP within a specific time (usually 10 minutes).
Arguments:
Arg1: 0000000000000004, The power transition timed out waiting to synchronize with the Pnp
subsystem.
Arg2: 0000000000000258, Timeout in seconds.
Arg3: fffffa8006789b50, The thread currently holding on to the Pnp lock.
Arg4: fffff800060e33d0, nt!TRIAGE_9F_PNP on Win7

Debugging Details:
------------------

Implicit thread is now fffffa80`06789b50

DRVPOWERSTATE_SUBCODE: 4

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT

BUGCHECK_STR: 0x9F

PROCESS_NAME: System

CURRENT_IRQL: 2

LAST_CONTROL_TRANSFER: from fffff800046bc652 to fffff800046c9b8a

STACK_TEXT:
fffff880`035af070 fffff800`046bc652 : fffffa80`06789b50 fffffa80`06789b50 00000000`00000000 00000000`00000000 : nt!KiSwapContext+0x7a
fffff880`035af1b0 fffff800`046cda9f : fffffa80`0d51f4f0 00000000`00000002 00000000`00000000 fffff880`05b88ff8 : nt!KiCommitThreadWait+0x1d2
fffff880`035af240 fffff880`05b88f51 : 00000000`00000000 00000000`00000000 fffffa80`0ca52000 fffff800`049ae700 : nt!KeWaitForSingleObject+0x19f
fffff880`035af2e0 00000000`00000000 : 00000000`00000000 fffffa80`0ca52000 fffff800`049ae700 fffff880`03365180 : EtronHub3+0x5f51
STACK_COMMAND: kb

FOLLOWUP_IP:
EtronHub3+5f51
fffff880`05b88f51 ?? ???

SYMBOL_STACK_INDEX: 3

... Read more

http://www.sevenforums.com/bsod-help-support/281590-random-bsods-sporadic-often-page-fault-errors.html
Relevancy 75.25%

Since yesterday I've been experiencing random BSODs. It usually happens when I'm web browsing, opening folders, or sometimes just idling in Desktop. It's never happened when I was gaming though.

I did Prime95, Memtest, and checkdisk. My system passed all three so maybe that would rule out hardware problems. I also tried removing my antivirus and reinstalling my video drivers but the BSOD still happens. Any help would be much appreciated, thanks.

A:Random BSODs happening lately, 'Page fault in none paged area'

Demon Tools is known to BSOD Windows, Uninstall it and let us know if they stop.

Thanks

http://www.sevenforums.com/bsod-help-support/260537-random-bsods-happening-lately-page-fault-none-paged-area.html
Relevancy 75.25%

First time on this forum and looking for some help with a problem that s been happening for a while I built a new Athlon system about months ago weeks into the initial build I got my first BSOD I would average another BSOD every weeks or so with no apparent problems in between The basic info for the machine is as follows Athlon Newcastle w stock HSF Asus A V Deluxe Rev x MB Corsair VS PC - - - dual channel Enermax EG P-VE PSU x GB Hitachi K SATA in RAID on VIA controller GB Hitachi K SATA on Promise controller Plextor PX- A DVD -R RW Radeon XT MB SB Audigy I put up with the problem for a while but finally decided a few months ago to get serious about trying to fix it Problem is I can t recreate or predict the problem I with Analyzing (Page Windows Debugger Error) 50 BSODs Fault ve run a number of different diagnostics memtest docmem Prime CPU burn-in Super PI drive utilities etc and nothing reported errors or crashed the system Never had a crash during gaming either The BSODs seem more likely to happen when the system is idling or at light load actually although I haven t find an identifiable pattern About months ago I decided to start fresh with new drives and Win XP SP Made sure to get the latest drivers BIOS etc I got Analyzing BSODs with Windows Debugger (Page Fault 50 Error) about weeks out of it before another BSOD and have had several since--the fresh install didn t do the trick either This past week I ve spent some time trying to see if the windows dump files can yield any clues Here s where I need some help since I really don t know how to process the info in the files I ve managed to open the files with the Windows debugger and Analyzing BSODs with Windows Debugger (Page Fault 50 Error) performed a basic analysis but I m not able to interpret the info I don t have a dump file for every crash a few of them didn t give a BSOD but just rebooted but the three I do have contain very similar info Here s one example of what Debugger is reporting Bugcheck Analysis Use analyze -v to get detailed debugging information BugCheck be f d be f d Could not read faulting driver name Probably caused by ntkrnlpa exe nt KiTrap E cc Followup MachineOwner --------- kd gt analyze -v Bugcheck Analysis PAGE FAULT IN NONPAGED AREA Invalid system memory was referenced This cannot be protected by try-except it must be protected by a Probe Typically the address is just plain bad or it is pointing at freed memory Arguments Arg be f d memory referenced Arg value read operation write operation Arg be f d If non-zero the instruction address which referenced the bad memory address Arg reserved Debugging Details ------------------ Could not read faulting driver name WRITE ADDRESS be f d FAULTING IP ffffffffbe f d be f d MM INTERNAL CODE CUSTOMER CRASH COUNT DEFAULT BUCKET ID DRIVER FAULT BUGCHECK STR x LAST CONTROL TRANSFER from a a d to be f d STACK TEXT WARNING Frame IP not in any known module Following frames may be wrong a a d a a d ffed bf f ad xbe f d a a d c c bd e c xa a d a a d c c eb bd e c nt KiFastCallEntry xf ffee x c eb FOLLOWUP IP nt KiTrap E cc f ec c test eax eax SYMBOL STACK INDEX FOLLOWUP NAME MachineOwner SYMBOL NAME nt KiTrap E cc MODULE NAME nt IMAGE NAME ntkrnlpa exe DEBUG FLR IMAGE TIMESTAMP a d STACK COMMAND trap ffffffffa a c kb FAILURE BUCKET ID x W nt KiTrap E cc BUCKET ID x W nt KiTrap E cc Followup MachineOwner The one thing that strikes me as particularly odd is that the value in the second argument doesn t make sense Debugger list or as valid results but the returned value is So far I haven t been able to get any more info about that I m hoping that someone here can help me interpret this information and try to discover the cause of the problem I ll try to upload the actaully minidump files as well in case someone wants to try to analyze them directly Thanks for the help nbsp

A:Analyzing BSODs with Windows Debugger (Page Fault 50 Error)

I am attaching .dmp files in .zip format...hope they yield some helpful information.
 

http://www.techspot.com/community/topics/analyzing-bsods-with-windows-debugger-page-fault-50-error.29495/
Relevancy 75.25%

Hi everybody,

For the past 1 month I've been getting Irql not less or equal and Page fault in non paged area BSODs every day several times and I have read so many posts for troubleshooting these errors and tried so many of them, from a clean windows 7 install to updating drivers, using driver sweeper and then updating again and what not..

But I just dotn seem to understand whats wrong. Tried understanding the minidumps using bluescreen view and I all could gather was some issue with ntoskernel.exe

I'm attaching my minidumps, can someone please tell me whats wrong - is it my laptop getting too hot or some driver etc?

Extra Info: The laptop is HP dv-7 running Win7-x64 and does seem to get pretty hot, especially when I'm playing Counter Strik 1.6 on Steam and crashes are much more frequent when I'm playing Steam CS 1.6

Thanks and Regards
 

A:IRQL not less or equal and page fault in non paged area BSODs

Okay, I think it is time to check your memory and then check the hard drive for errors. Take your time and follow these instructions:
http://www.techspot.com/vb/topic51365.html
 

http://www.techspot.com/community/topics/irql-not-less-or-equal-and-page-fault-in-non-paged-area-bsods.178045/
Relevancy 75.25%

So for a long time now probably going on over a year I've been wrestling with my computer I should get a new one and just start from zero but I can't afford that right now so I'm hoping that I may be able to get some help here Essentially my computer crashes a lot sometimes randomly and sometimes with noticeable patterns It's sometimes a BSOD usually Memory Management sometimes Page Fault and I got a Driver IRQL a long time ago and sometimes it's just a flat hang with a stuttering sound repeating until I do Fault BSODs Multiple Page Memory and Management Crashes, and a hard reset Something I've noticed lately is it crashes more often when I have Multiple BSODs and Crashes, Memory Management and Page Fault flash player up for some reason or another but especially for streaming videos There's also been a couple of times where first firefox and or the flash plugin will crash then the PC will run for a bit but if I try to bring firefox back up it will hang or BSOD I've gotten crashes for other reasons though In addition sometimes when I start the PC up it won't post saying a BIOS checksum failed and that it can't detect a keyboard That's usually solved by restarting it once or twice more I've had other various errors in the past but that's the majority of it and what's been happening recently The following is the steps I've taken so far Run Memtest overnight and for hours at a time no errors Run various hard drive checking utilities no errors Run chkdsk on both hard drives I've gotten the occasional bad sector but hasn't changed crashes afterward Reinstalled Windows both repair and clean I've also done sfc scannow afterward and everything was fine Removed Daemontools Avast replaced with MSE and several other bad programs Run CCleaner and various registry fixing tools I've had registry errors but cleaning them hasn't helped Run Full virus and malware scans both originally with Avast then with MSE and also Malwarebytes no viruses Replaced the Motherboard Graphics Card and CPU at various points since the problems first started not always as an attempt to specifically fix it but worth mentioning Updated the BIOS on the replaced motherboard and replaced its battery Reinstalled Flash and kept it updated just in case No luck Similarly I've kept all my drivers up to date and use Windows Update regularly I'm at my wit's end trying to find a way to make my PC stable Any help or insight would be appreciated Logs attached per the forum instruction but that only has the last one due to the aforementioned reinstall and cleans If I get a new BSOD I'll update it

A:Multiple BSODs and Crashes, Memory Management and Page Fault

just analysed the .dmp files and what really concerned me was this bit at the endof the dump file:

IMAGE_NAME: memory_corruption

this and a few other things in there indicated possible corruppted memory, if this is the case I would reccomend backing up all files IMMEDIATELY and then, just to confirm what is happening, run memtest and get back to me with results

Memtest86+ - Advanced Memory Diagnostic Tool

http://www.sevenforums.com/bsod-help-support/368916-multiple-bsods-crashes-memory-management-page-fault.html
Relevancy 74.39%

Hello all-- I built a custom rig about weeks ago I noticed a BSOD in the first week KERNEL INPAGE ERROR and thought I might have some out of INPAGE KERNEL and AREA NONPAGED ERROR IN BSODs FAULT PAGE date drivers I updated every driver I could think of but I got the same BSOD KERNEL INPAGE ERROR and PAGE FAULT IN NONPAGED AREA BSODs the next KERNEL INPAGE ERROR and PAGE FAULT IN NONPAGED AREA BSODs week I checked in the C Windows Minidump folder but KERNEL INPAGE ERROR and PAGE FAULT IN NONPAGED AREA BSODs it was empty--I confirmed that my system was configured to create minidump files but didn t quite know what else to do The next week same thing I tried memtest org Windows Memory Diagnostic Tools and chkdsk When I ran chkdsk on my HDD a few errors came up and were fixed so I thought the problem was solved Then the I received another BSOD the next day and one the day after that When I built this computer I used an SSD for the OS files and an HDD from an older computer to save all of my files I figured the issue was that there were old system files on the HDD that were interfering so I formatted the HDD and installed WIndows clean on the SSD again I figured that would cover most of my bases Yesterday I got the PAGE FAULT IN NONPAGED AREA BSOD I m sort of at my wit s end now This OS install was literally days old I don t really have a lot of programs on it yet so I can t think of any application that would be causing this On the plus side I do have a minidump file now and I ve attached it here It was suggested that this could be a result of faulty RAM but so far I have been unable to confirm that with any diagnostics Thing s I ve tried --wiping HDD reinstalling Windows on SSD --chkdsk on all hard drives errors were fixed on HDD --memtest from www memtest org hours passes no errors or failures --Updating GPU drivers More hopefully helpful information --The BSODs have mostly occurred when I m not in the room It s not happening during a specific program it s usually happening while the computer s completely idle One time it happened while I was playing WoW but that was an anomaly not the norm --My rig runs pretty cool degrees C or so when idle degrees or so under load --I m not currently overclocking anything I would like to but I can t seem to get my system stable enough so I m not at the moment --Given that it s happened across multiple installs of the OS and that it s more or less happened since Day with this install I don t think a System Recovery System Restore is going to help --If I m running programs off my HDD secondary drive should I have a page file set up on that drive My rig --Intel Core i k chipset --Gigabyte Z mobo GA-Z XP-UD --CORSAIR Vengeance GB x GB -Pin DDR SDRAM DDR --MSI N GTX Hawk GeForce GTX Fermi GB -bit GDDR --OCZ Solid SLD - SAT - G quot GB SATA III MLC SSD --WD Caviar Blue HDD g -- W PSU --Windows -bit This current install is days old I ve been browsing this forum for the past few weeks trying different things--everyone on here seems really friendly and helpful Anything you guys can think of would be GREATLY appreciated Thank you everyone nbsp

Relevancy 74.39%

Hi guys

I like to attempt and fix PC issues myself but this one is stumping me?

6 month old laptop - first BSOD i've had for years (my old 7yr old PC never)

BSODs seemingly randomly 3 different indicators seen- special pool error, unequal or equal error, page fault in unpaged area...

Attached are the details in the SF Diag zip


I have run memtest86- no issues
Simple MS debug offered TCPip.sys but driver normal
Have a full belarc profile summary too if required



Other issues lately- unsure if related - wifi dropping out/slow to connect

Hit 2 websites lately that were viral- caught by symantec but noted.

Everything else updated as required
I dont game
Do watch movies, etc

Any help pointers would be appreciated

Thanks
Trevor

A:BSODs- special pool, unequal or equal error, page fault...help please!

Are you able to Up Date Windows?

http://www.sevenforums.com/bsod-help-support/243414-bsods-special-pool-unequal-equal-error-page-fault-help-please.html
Relevancy 73.96%

Hello,

Monday i reinstalled Windows 7 64 bits Ultimate Edition after receiving new ram and new motherboard
I have installed Windows 7 64 from USB device, and randomly i have BSODs, PAGE FAULT IN NON PAGED AREA and IRQL NOT LESS OR EQUAL , always caused by ntoskrnl.exe. ( Whocrashed says: "This was probably caused by the following module: ntoskrnl.exe (nt+0x705C0)
)"

It occurs very rarely, not only when i am playing or using programs that use many ressources, It is very random.

I ran:

Memtest : 17 hours, 8 passes, no errors
OCCT: 1 hours, no error, CPU Overclocked and not overclocked, RAM with 1600 Mhz and 1333 Mhz
Furmark ( for GPU): 1 hours, no problems
chkdsk: Done

I have checked tempsฐ with AIDA64, no problems.

Windows 7 Ultimate 64 bits, full retail.

CPU : AMD Phenom II X3 720
PSU: OCZ ModXstream 500 W
Graphics: ATI Radeon HD 6850
ASUS M4A89GTD PRO/USB 3
RAM: Corsair Vengeance 2*4 DDR3-1600 CL9
 

A:Daily BSODs Win7x64, page fault in non paged area and irql not less or equal

You might have to play with the memory voltage or timings a bit, in the bios
 

http://www.techspot.com/community/topics/daily-bsods-win7x64-page-fault-in-non-paged-area-and-irql-not-less-or-equal.173601/
Relevancy 73.96%

Ok I've always maintained VAIO: NONPAGED & readyboost AREA; & mini-sys; PAGE IN nv_4 FAULT BSODs that the secret to the Internet is humbling one's self and asking for help from those who have been there or are there Well here i am Bought a BSODs & VAIO: PAGE FAULT IN NONPAGED AREA; nv_4 mini-sys; & readyboost Sony Vaio VGN- SZ P nd hand that already had Windows quot upgraded quot Encountered BSODs & VAIO: PAGE FAULT IN NONPAGED AREA; nv_4 mini-sys; & readyboost BSOD when playing quot big media quot Usually when trying BSODs & VAIO: PAGE FAULT IN NONPAGED AREA; nv_4 mini-sys; & readyboost to watch something on Media Player Classic But also when trying to set up Itunes or doing something that requires a lot of computing I uploaded a bunch of attachments - i think it's what someone would want to see in order to help me ok Here's the system info and minidump i think you requested Excellent tip by the way with the quot send to zipped folder quot advice i have tried to solve this problem for a couple weeks always thinking it was a missing or outdated driver it's suggested that i need a new graphics card but i don't do any online gaming and rarely watch movies on my VAIO The screen looks awesome and the computer runs great except for this problem

A:BSODs & VAIO: PAGE FAULT IN NONPAGED AREA; nv_4 mini-sys; & readyboost

We do need the DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.

If you are overclocking STOP
We could also use some system information, which you can get easily by running msinfo32.
To do that go to start>run>type msinfo32>enter

When it is finished running go to file>save>name it and upload to us here.
You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.

To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

The procedure:





Quote:
* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.
*If the files are too large please upload them to a file sharing service like "Rapidshare" and put a link to them in your reply.



To ensure minidumps are enabled:





Quote:
* Go to Start, in the Search Box type: sysdm.cpl, press Enter.
* Under the Advanced tab, click on the Startup and Recovery Settings... button.
* Ensure that Automatically restart is unchecked.
* Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
* Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
* OK your way out.
* Reboot if changes have been made.

http://www.sevenforums.com/bsod-help-support/223751-bsods-vaio-page-fault-nonpaged-area-nv_4-mini-sys-readyboost.html
Relevancy 73.96%

Hey there everyone! I'm pretty new to this forum but i really need your help.

Earlier today i experience 2 different BSOD erros at different times, and for no apparent reason.

I'm not sure what the reason is for either of them since i just reformatted earlier today. I have the dump file for each of the BSODs. It is attached.

Could anyone possibly tell me what the problem could be? Thanks in advance
 

A:BSODs - (driver is mismanaging system PTEs, page fault in non-paged area)

nothing attached.
 

http://www.techspot.com/community/topics/bsods-driver-is-mismanaging-system-ptes-page-fault-in-non-paged-area.144785/
Relevancy 68.37%

Ntfs sys PAGE FAULT IN NON PAGE AREA Registry Fault Many Thanks in advance this is my first time I have had a PC problem MY PC is th mth old Dell Inspiron running Windows Vista x GB RAM The problem started when I was watching a video clip on Windows media player The screen started breaking up on to horizontal coloured lines predomenantly Pink and the PC froze I tried rebooting in safe mode however it wouldn t allow howevere managed to do Start up repair At first I was getting a blue screen Ntfs sys PAGE FAULT IN NON PAGE AREA however after reboot a number of times including running CHKDSK and startup repair the system eventually let me through to the windows log on screen After logging the sreen you access programms from the screens breaking up again on to horizontal coloured lines I have tried cleaning dust from PAGE / IN FAULT PAGE Registry AREA Ntfs.sys NON Fault inside case and removed and re inserted RAM Tried repeating checks e g start up repair and receive the following - Problem Event Name Start Repair V Problem Signature AutoFailover Problem Signature Problem Signature Problem Signature Ntfs.sys PAGE FAULT IN NON PAGE AREA / Registry Fault Problem Signature Unknown Problem Signature Corrupt Registry Problem Signature Problem Signature Problem Signature Rollback Registry Problem Signature OS Version Locate ID Diagnosis amp Repair details Startup Repair diagnosis amp repair log Last successful boot time am GMT Number of Repair Attempts Session details System Disk Device Harddisk Windows directory C Windows Autochk Run Number of Root causes Tests performed Name check for updates Result completed successfully Error Code x Time takes ms Tests performed Name system disk test Result completed successfully Error Code x Time takes ms Tests performed Name disk failure diagnosis Result completed successfully Error Code x Time takes ms Tests performed Name disk metadata test Result completed successfully Error Code x Time takes ms Tests performed Name target os test Result completed successfully Error Code x Time Ntfs.sys PAGE FAULT IN NON PAGE AREA / Registry Fault takes ms Tests performed Name volume content chack Result completed successfully Error Code x Time takes ms Tests performed Name boot manager diagnosis Result completed successfully Error Code x Time takes ms Tests performed Name boot log diagnosis Result completed successfully Error Code x Time takes ms Tests performed Name Event log diagnosis Result completed successfully Error Code x Time takes ms Tests performed Name internal state check Result completed successfully Error Code x Time takes ms Tests performed Name boot status test Result completed successfully Error Code x Time takes ms Tests performed Name set up state check Result completed successfully Error Code x Time takes ms Tests performed Name registry hives test Result completed successfully Error Code x Time takes ms Root cause found Repair action Registry roll back Result failed error Code x Time taken ms Finally Not sure if this would have anything to do with it however I downloaded Quicktime to play music clip about a minutes earlier before the problem started happening Also I have family photos on the PC which are not backed up and would like to protect then of possible nbsp

A:Ntfs.sys PAGE FAULT IN NON PAGE AREA / Registry Fault

the error means that your PC asked for a page of memory , and the page was not available. when the operation could not continue, it BSOD'd and shut down. Its usually happens as a result of a hardware that is misfiring or failing. The 'Page_Fault_in_Nonpaged_Area' and "driver_irql_not_less_or_equal" BSOD's often show up consecutively and alternately. Things to try to correct or identify the problem are to restore your machine to the last know working configuration. if the problem keeps appearing run disk check for errors on your HDD. if that shows nothing, the next most likely suspect is a problem with the Ram. You can download any number of programs that will test your ram for errors. Win 7 has a built in memory test (not sure about the RC though) and you do not have to burn a disc to run it. Hope that helps some.
 

http://www.techspot.com/community/topics/ntfs-sys-page-fault-in-non-page-area-registry-fault.149446/
Relevancy 62.35%

hey guys not sure if this belongs in this forum but i just got a blue screen with this error up after trying to connect to a wireless network. going through the event viewer i have the following details

Error code 10000050, parameter1 a50773d0, parameter2 00000000, parameter3 ad0931bb, parameter4 00000000.

For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.


0000: 53 79 73 74 65 6d 20 45 System E
0008: 72 72 6f 72 20 20 45 72 rror Er
0010: 72 6f 72 20 63 6f 64 65 ror code
0018: 20 31 30 30 30 30 30 35 1000005
0020: 30 20 20 50 61 72 61 6d 0 Param
0028: 65 74 65 72 73 20 61 35 eters a5
0030: 30 37 37 33 64 30 2c 20 0773d0,
0038: 30 30 30 30 30 30 30 30 00000000
0040: 2c 20 61 64 30 39 33 31 , ad0931
0048: 62 62 2c 20 30 30 30 30 bb, 0000
0050: 30 30 30 30 0000


if anyone can shed some light on what happened id be grateful

thanks

http://www.techsupportforum.com/forums/f10/page-fault-in-nonpaged-area-fault-192721.html
Relevancy 59.34%

Hi,

Request you to please help me to fix this error which i am facing since long time.

I am getting error as Blue dump screen IRQL not less than or equal and sometime Page fault in non paged area.

I have removed my Ram Cleaned and reinstalled and tried different RAM still facing same issue.

Hard Disk also changed and still facing issue but frequency of error is less.

Looked device manager and cannot see any exclamation mark under any driver.

Changed Sata Cable but no use.

How we come to know where is the issue. Please help me out to fix this. I have attached dump file in zip.

My system specifications are:
Operating system : Windows XP service pack 2
Ram 512 MB
Hard Disk 160 GM
Pentium ฎD CPU 3.40 GHZ.

I really appreciate your help. Thanks in Advance!
 

A:Blue dump screen IRQL not less than or equal and page fault in non page area

Try testing your memory using Memtest86... Use Google to find it
 

http://www.techspot.com/community/topics/blue-dump-screen-irql-not-less-than-or-equal-and-page-fault-in-non-page-area.171290/
Relevancy 59.34%

Okay so when I play World of Warcraft for minutes- hours the game randomly shuts down I found out my problem was that my Video Card isnt up to date so I updated I updated and im still getting the same issue I looked at my EPU- Engine and when i click on VGA it says VGA [SOLVED] Area BSOD not Page Driver less or Page Non Equal IQRL Fault not detected Can someone please tell me what the possible problem can be and how I can fix this My graphics [SOLVED] BSOD Driver IQRL not less or Equal Page Fault Non Page Area card is a ATI Radeon HD mb I cant attach mini-dumps because for some odd reason it I apparently dont have permission so if anyone know how to bypass through this please let me know System specs Motherboard ASUS M A -M Processor AMD Phenom II X GHz RAM GBDDR VGA ATI RADEON HD mb Oh and by the way it sometimes goes blackscreen with these lines coming down while the game plays in the background and I have to manually turn off my computer Sometimes it gives me BSODs with PAGE FAULT NON PAGE AREA or IRQL NOT LESS OR EQUAL

A:[SOLVED] BSOD Driver IQRL not less or Equal Page Fault Non Page Area

Smells like video card puttering out.

Are you referring to a permission denial by attempting to attach the dumps directly? You'll need to zip them first before sending them over, as only certain file types are permitted. Plus there's a 5 MB limit (doubt that's the cause though).

http://www.techsupportforum.com/forums/f299/solved-bsod-driver-iqrl-not-less-or-equal-page-fault-non-page-area-565765.html
Relevancy 59.34%

Guys I been facing some issues with my relatively new CPU I have an Intel i cpu combined with GB DDR memory Mobo is DH BL - revision No GPU installed Power supply is via Corsair VX Problem i been facing BSOD saying BSOD(Page page interrupt hangs area/Clock not + recd) Non Facing fault that A clock interrupt wasnt recd Screenshot - http i tinypic com lbhc jpg BSOD Facing BSOD(Page fault Non page area/Clock interrupt not recd) + hangs saying Page fault in non paging area Couldnt grab a screenshot for this Display randomly goes off for a split second and reappears but the color of the panes go blue i havent chosen blue My setting is Facing BSOD(Page fault Non page area/Clock interrupt not recd) + hangs for clear pane Screenshot - http i tinypic Facing BSOD(Page fault Non page area/Clock interrupt not recd) + hangs com o vfs png This error solves itself after random number of hours mins Display vanishes for a split second and reappears and a small balloon at the bottom right corner prompts that the display driver had stopped working System plain hangs stops responding Randomly happens but more so while on youtube or after hrs of it idling i come back to the comp and try to scroll the content onscreen Sometime it revives from the stuck state as if nothing happened sometimes i have to give it a cold boot While reading forums with blue bands the blue bands kinda form blurry bars which stretch till the end of the screen I tried to grab a screenshot but the screenshots were clean The bands moved as i dragged the image about Also my comp's display went off one day and within a second came back with a blue-ish hue It restored itself but again has gone back to blue-ish I never have overclocked my processor What can be the reason for this Pls help me out here Other relevant information Windows x No other OS resides installed on system Full Retail Version OS was installed in July The cpu mobo were purchased in July I had Dynet RAM x GB each now using Corsair x GB Purchased in Aug i think The issue of hanging etc was faced with the Dynet RAM as well RAM info http i tinypic com hrolw png http i tinypic com neuxzk png

A:Facing BSOD(Page fault Non page area/Clock interrupt not recd) + hangs

33 of 44 crashes were related (as you surmised ) to a Bugcheck of 101. The rest were various hardware complaints. Please read below for what to try.

STOP 0x101: CLOCK_WATCHDOG_TIMEOUT troubleshtg
You should also update to SP-1 when you resolve this issue.

http://www.sevenforums.com/bsod-help-support/223527-facing-bsod-page-fault-non-page-area-clock-interrupt-not-recd-hangs.html
Relevancy 59.34%

Computer has been going to Fault Non in Blue provideed Area...HJT Page Screen-Page blue screen and saying quot Page fault in non page area quot then begins dump of memory I dont know if it has been infected or what I have in the recent past had to remove the xp virus pro bug with Malware Blue Screen-Page Fault in Non Page Area...HJT provideed Bytes Seemed all was ok then a couple of days later this started happening Have attached the hjt log from my initial request of help I thank Blue Screen-Page Fault in Non Page Area...HJT provideed you for any help Hijack this log Logfile of Trend Micro HijackThis v Scan Blue Screen-Page Fault in Non Page Area...HJT provideed saved at PM on Platform Windows XP SP WinNT MSIE Internet Explorer v Boot mode Normal Running processes C WINDOWS System smss exe C WINDOWS system winlogon exe C WINDOWS system services exe C WINDOWS system savedump exe C WINDOWS system lsass exe C WINDOWS system svchost exe C WINDOWS System svchost exe C Program Files Common Files Symantec Shared ccSetMgr exe C Program Files Lavasoft Ad-Aware aawservice exe C WINDOWS system spoolsv exe C PROGRA AVG AVG avgwdsvc exe C WINDOWS System GEARSec exe C Program Files Microsoft SQL Server MSSQL HONDAEPC Binn sqlservr exe C WINDOWS system PRISMSVC EXE C WINDOWS Explorer EXE C WINDOWS system PRISMSVR EXE C PROGRA AVG AVG avgrsx exe C PROGRA AVG AVG avgemc exe C WINDOWS system hkcmd exe C WINDOWS system igfxpers exe C WINDOWS System DLA DLACTRLW EXE C Program Files Microsoft IntelliPoint ipoint exe C PROGRA AVG AVG avgtray exe C Program Files Adobe Reader Reader Reader sl exe C WINDOWS system ctfmon exe C Program Files Common Files InstallShield UpdateService issch exe C Program Files Spybot - Search amp Destroy TeaTimer exe C Program Files kinberlin kinberlink Kinberlink exe C Program Files Microsoft SQL Server MSSQL HONDAEPC Binn sqlagent EXE C WINDOWS system wuauclt exe C Program Files Trend Micro HijackThis HijackThis exe R - HKLM Software Microsoft Internet Explorer Main Default Page URL http go microsoft com fwlink LinkId R - HKLM Software Microsoft Internet Explorer Main Default Search URL http go microsoft com fwlink LinkId R - HKLM Software Microsoft Internet Explorer Main Search Page http go microsoft com fwlink LinkId R - HKLM Software Microsoft Internet Explorer Main Start Page http go microsoft com fwlink LinkId R - URLSearchHook Yahoo Toolbar - EF BD -C FB- D - F- D F - C Program Files Yahoo Companion Installs cpn yt dll O - BHO amp Yahoo Toolbar Helper - D -C F - efb- B - ECA - C Program Files Yahoo Companion Installs cpn yt dll O - BHO Adobe PDF Reader Link Helper - E F-C D - D -B D- B D BE B - C Program Files Common Files Adobe Acrobat ActiveX AcroIEHelper dll O - BHO WormRadar com IESiteBlocker NavFilter - CA F - F E- B -A E- E E C C - C Program Files AVG AVG avgssie dll O - BHO Spybot-S amp D IE Protection - - F - D - - D F - C PROGRA SPYBOT SDHelper dll O - BHO DriveLetterAccess - CA D E- - CF- E - - C WINDOWS System DLA DLASHX W DLL O - Toolbar no name - BF - F - - - FE E AA - no file O - Toolbar Yahoo Toolbar - EF BD -C FB- D - F- D F - C Program Files Yahoo Companion Installs cpn yt dll O - HKLM Run igfxtray C WINDOWS system igfxtray exe O - HKLM Run igfxhkcmd C WINDOWS system hkcmd exe O - HKLM Run igfxpers C WINDOWS system igfxpers exe O - HKLM Run DLA C WINDOWS System DLA DLACTRLW EXE O - HKLM Run IntelliPoint quot C Program Files Microsoft IntelliPoint ipoint exe quot O - HKLM Run AVG TRAY C PROGRA AVG AVG avgtray exe O - HKLM Run LXCGCATS rundll C WINDOWS System spool DRIVERS W X LXCGtime dll email protected O - HKLM Run Adobe Reader Speed Launcher quot C Program Files Adobe Reader Reader Reader sl exe quot O - HKLM Run ISUSPM Startup quot C Program Files Common Files InstallShield UpdateService isuspm exe quot -startup O - HKCU Run ctfmon exe C WINDOWS system ctfmon exe O - HKCU Run ISUSScheduler quot C Program Files Common Files InstallShield UpdateService issch exe quot -start O - HKCU Run SpybotSD... Read more

Relevancy 59.34%

Here are my system specs:
AMD 2200+
WinXP Pro SP2
760MB Ram
nVIDIA GForce 4 video

My computer will randomly shut down with either the page fault in non page area or driver not less of equal errors.

I have uninstalled and reinstalled drivers for the video and usb.

I don't know what else to do.

Will

A:BSOD Page Fault in Non Page Area/ Driver not less or equal

Hi flannelman,

Please give us the exact error message.

Thanks,

Rigel

http://www.bleepingcomputer.com/forums/t/28411/bsod-page-fault-in-non-page-area-driver-not-less-or-equal/
Relevancy 59.34%

this is my 1st post so i hope im doing everything right. ive had this problem from the beginning, when i built this computer. it just happens more so when im playing online games. i get 3 different errors the most common one is the page fault non page error the other two are dxgmms1.sys and memory management something. i thought it might be bad ram so a ran memtest86+ and everything came back good. i also thought it might be a bad install so i ran a repair and it found NET framework 4.0 was bad, so i downloaded it again. i thought it was fixed but its still doing it, crashes. please help

A:BSOD mostly when playing mmos page fault non page error

Welcome,

You have 32 GB of RAM. Are all the ram speed/clocks at the same level?

How many passes did you take memtest for? Did you try inserting each stick in different slots and see how your computer performs?

http://www.sevenforums.com/bsod-help-support/257162-bsod-mostly-when-playing-mmos-page-fault-non-page-error.html
Relevancy 58.48%

So just today, i turn on my computer, but i receive a BSOD, that says "Page fault in a Non page Area",
After some researching i clean my computer, and still receive the error.

I can safely boot into safe mode, and after booting into safe mode i can then boot into windows 7 (Windows 7 Ultimate 64 Bit) normally after restarting. But the computer just goes not responding, and i can't do anything.

I've run memtest but there's no problems.
I also have a minidump file.

Is there any solution to this?
 

A:Solved: BSOD Page Fault in Non Page Area

The minidump is showing klif.sys, Klif Mini-Filter fre_wnet_x86 from Kaspersky Lab, as the probable cause for your BSOD. Basically, it's a driver part of your Kaspersky software.

You may have installed a 32-bit version of Kaspersky on a 64-bit version of Windows 7.

Uninstall Kaspersky completely and try your computer again.
 

https://forums.techguy.org/threads/solved-bsod-page-fault-in-non-page-area.948839/
Relevancy 58.48%

I got this error when I installed Advance System Care and when i scanned my USB with noob killer. Then the P.C restarted and it started to displays the page fault in non page area.

The problem is when i boot in window xp cd it display this BOD error and when i boot Safe mode and Start windows normally it only reboot the P.C. So there is no way i can access the control tab window xp

My current p.C until i bought a new one :
Intel Pentium III ~ 1000Mhz ~ 192mb RAM ~ 15 GB disk and 40 slave HD

I need your expert advice thanks!!!
 

Relevancy 58.48%

I was listening to some Good Charlotte, and in my D: and all the sudden I get a blue screen sayin page fault none page area... I also got this problem when I tried to reinstall Media Player 9. It sounds like some system file is triggering tihs. What to do??
 

A:page fault none page area...Blue Screen

Can you post the exact error message ?

Usually these errors are related to corrupt drivers or bad ram.
 

https://forums.techguy.org/threads/page-fault-none-page-area-blue-screen.377478/
Relevancy 58.48%

Hi I keep getting a problem which appears to happen randomly every so often the computer will peform a physical memory dump and hold the warning message 'Page Fault in Non Page Area ' As i said it appears random and i thought it may be something to do with memory - i have gigs of Page Blue Page in Area Fault - non Screen ram as sticks I took each out and put them in each ram port and still came up with the same message I got a problem signature of - Problem signature Problem Event Name BlueScreen OS Version Locale ID Additional information about the problem BCCode BCP FFFFF AAB BCP BCP FFFFF E BCP OS Version Service Pack Product Files that help describe the problem C Windows Minidump Mini - dmp C Users Greg AppData Local Temp WER- - sysdata xml C Users Greg AppData Local Temp WER CFF tmp version txt I really have no idea of what is causing the porblem and would like any advice if possible on fixing it preferrably without buying anymore hardware But i understand to fix it i may well need to be My PC Specs are as follows - quad processor gb ram mb graphics card Windows Vista bit Hope for any solutions possible Thanks for your time Greg

A:Blue Screen - Page Fault in non Page Area

you could do a few different things, download memtest and test your RAM for faults: http://majorgeeks.com/MemTest_d350.html

Also go to start, right-click my computer click properties, click the advanced tab, click settings under perfromance, click advanced tab, click change, make sure it is set to system managed size. (EDIT: sorry this is the XP way, not on my vista machine at the moment, try something like that, if it you cant find it ill find the vista way for you)

If it still messes up, post back with your event viewer logs for any errors reported arround that time.

http://www.techsupportforum.com/forums/f299/blue-screen-page-fault-in-non-page-area-272207.html
Relevancy 58.48%

I keep getting BSOD at random times. Sometimes it crashes while I am not even doing anything. I have tried to reinstall windows couple times with different versions of Windows 7 x64. I have attached the mini dump files. Please help. Thank you
 

A:I keep getting Page fault in non page area BSOD on Windows 7

Hello,

I suspect bad RAM. Try testing it, using this guide:sevenforums.com/tutorials/105647-ram-test-memtest86.html

Sorry about the non-parsed link, I had to edit it to avoid detection by the forum software, which apparently prohibits new members like myself from posting links.

Firefox.exe was running in 2 dumps, which makes me suspect a network issue. Remove Norton, as per these directions: jcgriff2.com/NRT_N360_Removal.html

Replace it with MSE: microsoft.com/security_essentials

Summary of the Dumps:
Code:

Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Thu Oct 28 21:38:56.276 2010 (UTC - 4:00)
System Uptime: 0 days 1:45:02.587
BugCheck 50, {fffffa81856a0358, 0, fffff80002a8fb9b, 5}
Probably caused by : memory_corruption ( nt!MiDeleteAddressesInWorkingSet+27f )
BUGCHECK_STR: 0x50
PROCESS_NAME: firefox.exe
จจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจ
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Mon Oct 25 22:59:36.070 2010 (UTC - 4:00)
System Uptime: 0 days 0:01:01.382
BugCheck 1A, {5002, fffff70001080000, 2704, 2785fffffffe}
Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+2971c )
BUGCHECK_STR: 0x1a_5002
PROCESS_NAME: sidebar.exe
จจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจ
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Mon Oct 25 22:57:40.689 2010 (UTC - 4:00)
System Uptime: 0 days 0:36:04.000
BugCheck 50, {fffff680400202d8, 0, fffff80002aec2e2, 5}
Probably caused by : memory_corruption ( nt!MiAgeWorkingSet+1c2 )
BUGCHECK_STR: 0x50
PROCESS_NAME: svchost.exe
จจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจ
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Sun Oct 17 13:09:16.691 2010 (UTC - 4:00)
System Uptime: 0 days 0:09:32.002
BugCheck 50, {fffff680400543b0, 0, fffff800028d12e2, 5}
Probably caused by : memory_corruption ( nt!MiAgeWorkingSet+1c2 )
BUGCHECK_STR: 0x50
PROCESS_NAME: firefox.exe
จจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจ

 

http://www.techspot.com/community/topics/i-keep-getting-page-fault-in-non-page-area-bsod-on-windows-7.155688/
Relevancy 58.48%

Hey Folks,

I get the good old blue screen when running a video editing software STUDIO 10.7

PAGE FAULT IN NONPAGE AREA

I have a nice new Dell Inspiron 6400 with dual Intel T2050 1.60GHz CPUs, 1GB of RAM. I not sure on how to post the message but I try somehow.

Can someone please help me with this???

I thank you all in advance. *dmp file is attached*

Adrian
 

A:Blue Page: PAGE FAULT IN NONPAGE AREA

Hello and welcome to Techspot.

Your minidump crashes at HSFHWAZL.sys. This is your 56k modem driver.

If you don`t use a 56k modem, uninstall it. If you do use it, check for any updated drivers. See HERE for info.

Regards Howard :wave: :wave:
 

http://www.techspot.com/community/topics/blue-page-page-fault-in-nonpage-area.68831/
Relevancy 57.62%

I ve lately been getting the BSOD after installing all the Sims expansion packs It s page BSOD fault in non - Page area really annoying me because i don t know what to do I m going to attach the mini dump files because i saw that on BSOD - Page fault in non page area a similar question My drivers are fully updated I ve gotten the following information BSOD - Page fault in non page area from opening files on dxdiag i don t think it s going to help but hopefully OS Name Microsoft Windows XP Home Edition Version Service Pack Build OS Manufacturer Microsoft Corporation System Name COMPUTER System Model MS- System Type X -based PC Processor x Family Model Stepping GenuineIntel Mhz BIOS Version Date Phoenix Technologies LTD PG SMBIOS Version Windows Directory C WINDOWS System Directory C WINDOWS system Hardware Abstraction Layer Version quot xpsp - quot Total Physical Memory MB Available Physical Memory GB Total Virtual Memory GB Available Virtual Memory GB Page File Space GB Page File C pagefile sys and this OS Version Microsoft Windows XP Home Edition Service Pack bit Processor Intel R Pentium R CPU GHz x Family Model Stepping Processor Count RAM Mb Graphics Card NVIDIA GeForce FX BSOD - Page fault in non page area Microsoft Corporation Mb Hard Drives C Total - MB Free - MB Motherboard MICRO-STAR INTERNATIONAL CO LTD MS- Antivirus None Please help if you need more info then tell me Thanks nbsp

A:BSOD - Page fault in non page area

Your BSOD errors are being caused by nv4_disp.dll, which is an Nvidia graphics card driver. The BSODs are occurring while TS3SP03.exe is running, and TS3SP03.exe is related to SIMS3.

If the BSOD only occurs when playing the SIMS3, it would be difficult to blame the graphics card drivers. On the other hand, updating or re-installing the Nvidia graphics drivers might help.
 

https://forums.techguy.org/threads/bsod-page-fault-in-non-page-area.997787/
Relevancy 57.62%

This might be a little longish and for that I apologize This morning I turned on my Windows Ultimate Dell XPS and it ran for a few minutes and in fault BSOD area non-page Page threw the BSOD error code described in the title Let the system reboot it ran for a few minutes and did the same thing OK Now we have a pattern I'm not sure what it means but there is a pattern I tried to restore to a previous date June th and today is the th and everything seemed to be BSOD Page fault in non-page area going ok until it was complete Now the system is restarted but I'm getting no video except for the cursor I have video during POST but nothing except the cursor after Windows starts Same thing happens during start up or start up in safe mode Obviously I can't see anything on the screen so I can't troubleshoot very extensively but if anyone has any suggestions I would greatly appreciate your help

A:BSOD Page fault in non-page area

Since Vista and 7 are very similar, and I just had the "black screen with cursor only" issue myself, this may help you, but I think it may be graphics driver related. I went to update my Nvidia graphics drivers, and it must not have worked properly, because all i got upon boot was a black screen with a cursor. i would get the windows boot logo and animation, and then it would go to a black screen.
I did not get the BSOD, because I have the pagefile turned off(I have 8GB of system RAM).

For my solution, you will need 2 things: current Nvidia drivers, and a program called driver sweeper.

First, boot in safe mode, and go into your control panel, and "uninstall" the nvidia graphics drivers. it sounds stupid, but this is the only effective way to uninstall the graphics drivers because of the software nvidia bundles with them. Next, run driver sweeper, and get rid of all remnants of the graphics card drivers. Then, reboot. First, go into a regular boot to see if you get video on the generic drivers from windows. If you do, your cards are good, reboot again, and go into safemode once again. If you dont get video upon normal reboot with generic drivers, see the * after this. Once back in safe mode, run the nvidia installer package, as administrator. It will install, and will prompt you to reboot. Reboot into a normal boot cycle and you should be fine, and have video again.

* if you boot into a normal boot, and you have followed the steps to remove your graphics drivers, you will be using windows generic ones. If you dont have video here, your graphics card may be faulty, or your hardware may be faulty, and you should contact your computer manufacturer for tech support or for an RMA.

http://www.sevenforums.com/bsod-help-support/171948-bsod-page-fault-non-page-area.html
Relevancy 57.62%

I've been getting a BSOD for quite some time. (about 3 or 4 months)
At first they would usually pop up when I've had the computer for most of the day, but recently they've just come as they please.
I've done a Memory Diagnostics and it showed no problems.
I've included from what I've read I believe to be a minidump of the BSOD.
I've decided to send multiple errors I found in my system event log just to be on the safe side since I don't know which errors I'm looking for.
If you could find anything that could explain what is causing this, please let me know.

Thank you.

A:Page fault in non page area BSOD

I've also read the sticky in the BSOD topic and completed steps 1-4.
I've included that as well.
Unfortunately, I do not know all the parts in my computer since I was not the one that bought them or put the computer together.

http://www.techsupportforum.com/forums/f299/page-fault-in-non-page-area-bsod-552713.html
Relevancy 57.62%

Hello I'm Wayne

Windows version : Windows 7 Ultimate
PC Specs : Intel(R) Core(TM) i5-3340 CPU @3.10GHz 3.30GHz
RAM : 8.00GB
64 bit
Manufacturer : Gigabyte Technology
Graphics : Nvidia GeForce GT 630

I Got a BSoD with some of the following text " CDD.DLL PAGE FAULT IN NON PAGE AREA "
I ran the Chkdsk Tool on windows and scanned with AVG and got nothing.
I'm pretty sure it's a RAM related problem , but not too sure , so I downloaded the SF diagnosis tool to get info to upload , please evaluate the logs and see if you can see a problem , thanks.

A:Bsod , cdd.dll , page fault in non page area

Hello, WayneTrain welcome to the Forums. I will try to help you. First start off by uninstalling all of the Gigabyte utilities as they are known BSOD causers. Next, reinstall your graphics drivers using this method
NVIDIA Drivers - Avoid Problems

See if that makes any differences to your system. Your dump files showed


Code:
nvlddmkm
start end module name
fffff880`072ba000 fffff880`07da2000 nvlddmkm T (no symbols)
Loaded symbol image file: nvlddmkm.sys
Image path: \SystemRoot\system32\DRIVERS\nvlddmkm.sys
Image name: nvlddmkm.sys
Timestamp: Wed Jul 10 06:44:34 2013 (51DD4922)
CheckSum: 00ABC1B3
ImageSize: 00AE8000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
The drivers are pretty old and need updating.

http://www.sevenforums.com/bsod-help-support/357662-bsod-cdd-dll-page-fault-non-page-area.html
Relevancy 57.62%

Please help, my computer keeps restarting with the BSOD. The error it give is page_fault_in_nonpage_area. I have basic computer skills, so if you could please walk me through a fix on this I would really really appreciate it. I am running windows xp on a dell.

Thank you so much in advance!

A:BSOD Page fault in non page area

Boot off of the Windows Disc Or download the Recovery Console ISO. Burn it to CD with IMGBurn Boot off of the CD and get to the Recovery Console. Here type chkdsk /R and press enter. The Check Disk utility will try and fix any file errors.
You can also download the ISO image for Seatools, or WD DataLifeGuardin my signature and burn the image to a CD using IMGBurn also in my signature and boot off of the newly created CD and run the Quick and Advanced tests on the HDD to test the integrity of the drive.

http://www.techsupportforum.com/forums/f10/bsod-page-fault-in-non-page-area-655518.html
Relevancy 57.62%

- x64 Win 7 home premium
- the original installed OS on the system? yes
- OEM version
- What is the age of system (hardware)?- 2 months old
- What is the age of OS installation (have you re-installed the OS?) 2 months old and no.


- HP P6674Y Pavilion Quad Core Phenom II 2.8Ghz, 8GB DDR3, 1TB SATA3, Windows 7 Home I did instal a video card: PowerColor AX3450 512MD2-H Radeon HD 3450 512MB 64-bit DDR2 PCI Express 2.0 x16 HDCP Ready Video Card and bigger PS: Antec EarthWatts Green EA-380D Green 380W and 2GB additional: SAMSUNG 2GB 240-Pin DDR3 SDRAM DDR3 1333 Desktop Memory ram when I first got it. The bsod has just started the last 2 days.

A:Page fault in non page area bsod

Hello there. I think that here you need to run a Check Disk tool.
Disk Check

Forget.
Ken answered you.

http://www.sevenforums.com/bsod-help-support/160331-page-fault-non-page-area-bsod.html
Relevancy 57.62%

Hello I am getting sick of BSOD's I recently changed by video card because i was experiencing BSOD: page fault in area non Page the stripe BSOD: Page fault in non page area problem with my XFX hd Now i used rma to get a new videocard and i got a Sapphire Vapor-X HD I got it juli so ignore the events before that because that was probebly my old videocard Only now i am experiencing random BSOD's I BSOD: Page fault in non page area got one just now when i was only running a virus scan kaspersky was the only program running I also got one during gaming Alien Swarm but it doesnt even matter cause it does it with all games And i got one BSOD during downloading newsgroups with grabit I currently am remote desktoping to my home pc to make the zip file needed for this post so the test might say that the network is a bit overloaded since i am running the test remotely I just saw the test is done and it said some nic's are disabled and that tungle a vpn is disabled Just ignore those since i disabled them because i dont use them I also checked my primairy harddisk intel ssd gig with hdtune pro and it did not find any errors Further more i uses memtest for my memory a while ago and it also didnt report any issues All drivers are up to date and so is windows So ignore network related issue's since this is not the problem And ignore problems before juli since i got a new videocard And perfmon said i didnt have antivirus but i do since i use kaspersky Please check out the zip file to locate my problem I personally think it is a ram related issue since its a page fault but memtest did not find anything

A:BSOD: Page fault in non page area

What memtest did you run? Be sure to use Memtest86:






  
Quote: Originally Posted by JK


Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Boot from the CD, and leave it running for at least 5 or 6 passes.


I know 3rd party anti-virus programs are famous for causing BSODs in Windows 7 and Vista, and Kaspersky is certainly one of them. Please remove it with this tool: http://support.kaspersky.com/downloa...vremover10.zip

Replace it with the free Microsoft Security Essentials: http://www.microsoft.com/security_essentials

If that does not work, please enable driver verifier: Using Driver Verifier to identify issues with Drivers

...Summary of the Dumps:
Code:

Built by: 7600.16539.amd64fre.win7_gdr.100226-1909
Debug session time: Tue Jul 20 13:56:10.507 2010 (UTC - 4:00)
System Uptime: 0 days 1:49:51.600
BugCheck 50, {fffffa80029bc00b, 0, fffff800030a043b, 2}
Probably caused by : memory_corruption ( nt!MiAgeWorkingSet+41b )
BUGCHECK_STR: 0x50
PROCESS_NAME: System
??????????????????????????????????????????????????????????????????????????????????????
Built by: 7600.16539.amd64fre.win7_gdr.100226-1909
Debug session time: Mon Jul 19 15:17:30.014 2010 (UTC - 4:00)
System Uptime: 0 days 2:21:55.106
BugCheck 50, {fffff8a01548d0d8, 1, fffff880010f7920, 2}
Probably caused by : fileinfo.sys ( fileinfo!FIStreamLogForNL+7b )
BUGCHECK_STR: 0x50
PROCESS_NAME: svchost.exe
??????????????????????????????????????????????????????????????????????????????????????
Built by: 7600.16539.amd64fre.win7_gdr.100226-1909
Debug session time: Wed Jul 14 17:54:34.441 2010 (UTC - 4:00)
System Uptime: 0 days 5:41:56.050
BugCheck 50, {fffffa8044ac1440, 0, fffff88001089424, 5}
Probably caused by : fileinfo.sys ( fileinfo!FIStreamFillStreamInfo+14 )
BUGCHECK_STR: 0x50
PROCESS_NAME: svchost.exe
??????????????????????????????????????????????????????????????????????????????????????
Built by: 7600.16539.amd64fre.win7_gdr.100226-1909
Debug session time: Wed Jun 30 12:13:06.392 2010 (UTC - 4:00)
System Uptime: 0 days 0:11:18.485
BugCheck 50, {fffff8a010dcb410, 0, fffff8800515584f, 2}
Probably caused by : dxgmms1.sys ( dxgmms1!VIDMM_SEGMENT::FlushPendingCPUAccess+57 )
BUGCHECK_STR: 0x50
PROCESS_NAME: System
??????????????????????????????????????????????????????????????????????????????????????
Built by: 7600.16539.amd64fre.win7_gdr.100226-1909
Debug session time: Wed Jun 30 13:40:41.760 2010 (UTC - 4:00)
System Uptime: 0 days 0:10:43.853
BugCheck 50, {fffffb5862c589e4, 1, fffff80002e633b0, 7}
Probably caused by : memory_corruption ( nt!MiDeleteAllHashMappings+170 )
BUGCHECK_STR: 0x50
PROCESS_NAME: WmiPrvSE.exe
??????????????????????????????????????????????????????????????????????????????????????
Built by: 7600.16539.amd64fre.win7_gdr.100226-1909
Debug session time: Wed Jul 21 02:20:01.505 2010 (UTC - 4:00)
System Uptime: 0 days 0:29:52.598
BugCheck 24, {1904fb, fffff88003954578, fffff88003953de0, fffff8000308e9e9}
Probably caused by : Ntfs.sys ( Ntfs!NtfsDeleteScb+108 )
PROCESS_NAME: System
BUGCHECK_STR: 0x24
??????????????????????????????????????????????????????????????????????????????????????

http://www.sevenforums.com/bsod-help-support/98890-bsod-page-fault-non-page-area.html
Relevancy 57.62%

I have an ASUS Win 7 laptop. It keeps giving me a BSOD at any time. I have uploaded a zip file with hopefully helpful info.

A:Win 7 BSOD page fault in non page area

Welcome .

One bugcheck is not enough to establish a pattern, if you have some more please upload those as well.

We can see that by looking at the stack that something called win32k in order refresh a window
(redraw) but it hung for some reason and that Kaspersky (klif.sys) could have been involved
in some way or another not much info here.


Code:
Unable to load image \SystemRoot\system32\DRIVERS\klif.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for klif.sys
*** ERROR: Module load completed but symbols could not be loaded for klif.sys
0xfffff880050aafb0 : 0xfffff960000e0000 : "win32k!DereferenceW32Process <PERF> (win32k+0x0)"
0xfffff880050ab028 : 0xfffff960000ffc0d : win32k!RGNOBJ::bCopy+0x5d
0xfffff880050ab068 : 0xfffff960003c8500 : win32k!gpvwplHungRedraw
0xfffff880050ab088 : 0xfffff800030c5cee : nt!KiPageFault+0x16e
0xfffff880050ab090 : 0x0000000000000008 : Trap @ fffff880050ab090
0xfffff880050ab0f8 : 0xfffff960001ad1fb : win32k!xxxSendMessageToClient+0x1f7
0xfffff880050ab168 : 0xfffff960001acaa7 : win32k!xxxSendMessageTimeout+0x2b6
0xfffff880050ab1a8 : 0xfffff960001687b5 : win32k!DEVLOCKOBJ::bLock+0x411
0xfffff880050ab1b8 : 0xfffff960001a7f5b : win32k!XDCOBJ::RestoreAttributes+0x3b
0xfffff880050ab248 : 0xfffff960001ae249 : win32k!ClearHungFlag+0x41
0xfffff880050ab278 : 0xfffff960001261f1 : win32k!xxxBeginPaint+0x2ad
0xfffff880050ab2d8 : 0xfffff960001bf2ec : win32k!NtUserBeginPaint+0x8c
0xfffff880050ab378 : 0xfffff960001c27bd : win32k!NtUserGetProp+0x6d
0xfffff880050ab3a8 : 0xfffff800030c6e53 : nt!KiSystemServiceCopyEnd+0x13
0xfffff880050ab3b0 : 0xfffffa80109d4b50 : Trap @ fffff880050ab3b0
0xfffff880050ab3c8 : 0xfffff80003394eb9 : nt!CmpDoOpen+0x319
I see that you have a mix of RAM modules:


Code:
[Memory Device (Type 17) - Length 28 - Handle 0040h]
Physical Memory Array Handle 003fh
Memory Error Info Handle [Not Provided]
Total Width 64 bits
Data Width 64 bits
Size 4096MB
Form Factor 0dh - SODIMM
Device Set [None]
Device Locator ChannelA-DIMM0
Bank Locator BANK 0
Memory Type 18h - Specification Reserved
Type Detail 0080h - Synchronous
Speed 1333MHz
Manufacturer Elpida
Serial Number
Asset Tag Number
Part Number EBJ41UF8BCS0-DJ-F
[Memory Device (Type 17) - Length 28 - Handle 0041h]
Physical Memory Array Handle 003fh
Memory Error Info Handle [Not Provided]
Total Width 64 bits
Data Width 64 bits
Size 4096MB
Form Factor 0dh - SODIMM
Device Set [None]
Device Locator ChannelB-DIMM0
Bank Locator BANK 2
Memory Type 18h - Specification Reserved
Type Detail 0080h - Synchronous
Speed 1333MHz
Manufacturer 859B
Serial Number
Asset Tag Number
Part Number CT51264BC160B.M16F
Did the issues start shortly after upgrading?

Please test the RAM for errors or else debugging a faulty / mismatched RAM is futile.
Testing the RAM:








  
Quote: Originally Posted by koolkat77


Test and Diagnose RAM Issues with Memtest86+:RAM - Test with Memtest86+


   Tip
Pay close attention to part 3 of the tutorial "If you have errors"
Test the RAM with Memtest86+ for at least 7-10 passes. It may take up to 22 passes to find problems. Make sure to run it once after the system has been on for a few hours and is warm, and then also run it again when the system has been off for a few hours and is cold.


... Read more

http://www.sevenforums.com/bsod-help-support/308724-win-7-bsod-page-fault-non-page-area.html
Relevancy 57.62%

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Ultimate, Service Pack 1, 32 bit
Processor: AMD Athlon(tm) 64 X2 Dual Core Processor 6000+, x64 Family 15 Model 67 Stepping 3
Processor Count: 2
RAM: 3071 Mb
Graphics Card: NVIDIA GeForce 9800 GTX/9800 GTX+, 512 Mb
Hard Drives: C: Total - 476929 MB, Free - 61344 MB;
Motherboard: Gigabyte Technology Co., Ltd., M61PME-S2P
Antivirus: avast! Antivirus, Updated and Enabled
Cpu usage sits at high 80's low 90's when app's are running
iexplorer.exe running at 22,000 when explorer is closed

Hi, still new to finding my way round a PC, so be gentle
 

A:BsoD Page Fault in Non Page Area

Please follow this small guide to attach your minidump files so they can be analysed.
First locate your minidump files, open Windows Explorer and click on the C: drive in the left pane, in the right pane look down the list of folders and double click on Windows to view its contents. NOTE: If your operating system is installed under a different drive letter then look there. Scroll down the contents of the Windows folder and look for a folder called minidump and double click on it. You should now see the minidump files which will have a .dmp extension.

Zip up at least 6 of the most recent files into one zip folder (if there are less then just zip up what you have).
NOTE: To zip up the files in Windows (all versions). Right click the file, click on Send To, and then click
Compressed (zipped) Folder. That will create a zip folder containing a copy of the file, you should see it appear.

If there is more than one .dmp file click on the first one, hold down the shift key and then click on the last one. That should highlight all the files. Then right click in the highlighted area, click on Send To, and then click Compressed (zipped) Folder.

Below the Message Box click on Go Advanced. Then scroll down until you see a button, Manage Attachments. Click on that and a new window opens.
Click on the Browse button, find the zip folder you made earlier and click on it so it becomes highlighted and click on Open.
Now click on the Upload button. Wait for the Upload to complete, it will appear just below the Browse box.
When done, click on the Close this window button at the top of the page.
Enter your message-text in the message box, then click on Submit Message/Reply.

 

https://forums.techguy.org/threads/bsod-page-fault-in-non-page-area.1100306/
Relevancy 57.62%

Hi there, I've recently been getting some weird crashes when I play Age of Empires 3. I'm not sure about other games, as this is the only one I've played in quite awhile. Randomly, I will get a BSOD, sometimes not at all though. The last one I got said PAGE_FAULT_IN_NON_PAGED_AREA. I've attached 6 (2 zips) minidumps in hopes that somebody can help me out

EDIT: I've read the pinned thread on what to do before attaching minidumps and completed (as best i could) all of the steps, but still get a BSOD. I have 1GB of memory, but it's in 4 sticks of 256MB so I couldn't really switch to a new slot. I did, however, clean the contacts.
 

A:Page Fault In Non Page Area Bsod

Hello and welcome to Techspot.

Your minidumps are quite old, being from december of last year.

Please post 5 or 6 of your latest minidumps.

Also, please go HERE and follow the instructions.

Regards Howard :wave: :wave:
 

http://www.techspot.com/community/topics/page-fault-in-non-page-area-bsod.43993/
Relevancy 57.62%

I fault in area page non page BSOD have been having issues with the BSOD since I first turned on the Laptop It was a very good price so I kept it dispsite the BSOD problems I have checked the drivers and updated what was updateable I flashed the Bios as newer version was available BSOD message changed between the Fault in non page area one about NTSF and one with no reason Originally the BSOD would pop up unexpectedly I have to restored or repaired every time I start up the Laptop That has changed now it seems to only happen at system start ups I can restart the laptop repeatedly with no problems once it is stable As long as there is a very short off time quot restart quot If I turn it off for a few hours overnight or for days I have to start the repair restore procedure all over again Until it is stabilized I have tried making a restore check point before turning off and going directly to the restore on thr next start up This seems to be a temporary work around until I can find the cause and correct it Also running a registry checker and repairing it has stopped the need to do factory resets as BSOD page fault in non page area the system BSOD page fault in non page area becomes more and more unstable with each BSOD Note The clock does NOT lose time So that rules out the internal battery I keep it plugged into a power outlet all the times There are NO AC and Battery problems I hope you can find the reason for the crashes in the attached files I hope I have attached and collected the files correctly

A:BSOD page fault in non page area

Please visit the below link for resolution :-
TechyKorner: Windows 7 BSOD error 0x00000050

http://www.sevenforums.com/bsod-help-support/191085-bsod-page-fault-non-page-area.html
Relevancy 57.62%

hi,
i just installed win 7 and installed all my drivers successfully,after an hour i got a bsod stating -page fault in non page area.Its been two days since am gettin this. i can log in and use my pc for some minutes before the bsod shows up..o and my pc is only 2 months old.please help.

A:BSOD-page fault in non page area

Hello Trx8 and welcome to Sevenforums.

BSOD Analyse

I'm suspecting 3rd party drivers, let's enable Driver Verifier.






Quote:
Using Driver Verifier is an iffy proposition. Most times it'll crash and it'll tell you what the driver is. But sometimes it'll crash and won't tell you the driver. Other times it'll crash before you can log in to Windows. If you can't get to Safe Mode, then you'll have to resort to offline editing of the registry to disable Driver Verifier.

So, I'd suggest that you first backup your stuff and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "IRP Logging", "Force Pending I/O Requests" and "Low Resource Simulation" and click "Next" ("Special Pool" may be able to be used depending on amount of RAM and errors being seen. In situations with small amounts of RAM, DO NOT select it),
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to crash to the Blue Screen. Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).

Reboot into Windows (after the crash) and locate the memory dump file. If present, turn off Driver Verifier by going back in and selecting "Delete existing settings" on the first page. Then, zip up the memory dump file(s) and upload them with your next post. If no dump files were generated, post back for further suggestions.

If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.

If that doesn't work, post back and we'll have to see about fixing the registry entry off-line:

Code:
Delete these registry keys to stop Driver Verifier from loading (works in XP, Vista, Win7):
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management\VerifyDrivers
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management\VerifyDriverLevel



3rd party drivers (be aware of them)


Code:
gdrv.sys Fri Mar 13 04:22:29 2009 (49B9D175)
amdxata.sys Tue May 19 19:56:59 2009 (4A12F2EB)
intelppm.sys Tue Jul 14 01:19:25 2009 (4A5BC0FD)
intelide.sys Tue Jul 14 01:19:48 2009 (4A5BC114)
gdmwmprt.sys Mon Aug 17 07:02:58 2009 (4A88E482)
gdmuwm.sys Fri Nov 13 05:17:30 2009 (4AFCDDDA)
AppleCharger.sys Mon Jan 10 10:57:29 2011 (4D2AD809)
L1C62x64.sys Tue Mar 22 06:32:33 2011 (4D883471)
RTKVHD64.sys Tue Jun 7 14:45:44 2011 (4DEE1D78)
idmwfp.sys Thu Jan 26 14:47:36 2012 (4F215978)
AtihdW76.sys Fri May 11 10:25:40 2012 (4FACCD04)
atikmpag.sys Tue Jun 26 17:22:10 2012 (4FE9D3A2)
atikmdag.sys Tue Jun 26 18:04:19 2012 (4FE9DD83)
gdrv.sys
amdxata.sys
intelppm.sys
intelide.sys
gdmwmprt.sys
gdmuwm.sys
AppleCharger.sys
L1C62x64.sys
RTKVHD64.sys
idmwfp.sys
AtihdW76.sys
atikmpag.sys
atikmdag.sys

Best Regards,
Frederik.

http://www.sevenforums.com/bsod-help-support/243181-bsod-page-fault-non-page-area.html
Relevancy 57.62%

I was on the internet playing a game and all of a sudden the screen froze and crashed to a BSOD. The error was BSOD Page Fault in Non Page Area, I'm confused at to why this happened and was wondering if anyone could help me.

 

https://forums.techguy.org/threads/bsod-page-fault-in-non-page-area.968725/
Relevancy 56.33%

Hi there I've recently built a new computer and everything seemed to be working fine up until a few weeks ago when I got a BSOD - okay no biggie I'll look it up and oh a different BSOD This was the beginning Since then I can't seem to use my computer for long periods or play games intensive - ntoskrnl.exe fault at BSODs to seems be Various and not intensive doesn't seem to Various BSODs - ntoskrnl.exe seems to be at fault matter which I Various BSODs - ntoskrnl.exe seems to be at fault tried to see if it was my graphics card so I ran Furmark and OCCT both of which said it's absolutely fine but I did a clean install of my AMD drivers just in case unfortunately this didn't solve the problem I also stressed the CPU and PSU using OCCT which also returned negative I then decided to use MemTest and left that running for passes overnight and again no negatives Frustrated I decided to get a BSOD dump viewer quot Blue Screen View quot which showed me that every single BSOD had been related to the ntoskrnl exe ntoskrnl exe I tried using driver verifier both on 'all drivers' and specifically on this ntoskrnl exe but apart from giving me Driver Violation Detected BSODs it didn't seem to help me much at all because I'd no idea how to chase up the results Here's a list of BSODs I can remember getting since the issue started Page fault in non-paged areaIRQL not less or equalMemory managementBad pool headerSpecial pool detected memory corruptionDriver verifier detected violation I'm really running short on ideas here as I've no idea how to proceed in tracking down the problem And so I turn to you guys for help - please find attached the dump zip as requested in the sticky And please let me know if there is any more information I can provide that would help you in helping me Thanks in advance

A:Various BSODs - ntoskrnl.exe seems to be at fault

Hi courageouscoos,

Welcome to the 10forums.

Have you checked the memory compatibility of your mainboard?
It doesn't look like the module is supported by your mainboard.
ASRock > H170M-ITX/ac

Code:
[Physical Memory Array (Type 16) - Length 23 - Handle 000eh]
Location 03h - SystemBoard/Motherboard
Use 03h - System Memory
Memory Error Correction 03h - None
Maximum Capacity 33554432KB
Memory Error Inf Handle [Not Provided]
Number of Memory Devices 2
[Memory Device (Type 17) - Length 40 - Handle 000fh]
Physical Memory Array Handle 000eh
Memory Error Info Handle [Not Provided]
Total Width 64 bits
Data Width 64 bits
Size 8192MB
Form Factor 09h - DIMM
Device Set [None]
Device Locator ChannelA-DIMM0
Bank Locator BANK 0
Memory Type 1ah - Specification Reserved
Type Detail 0080h - Synchronous
Speed 2133MHz
Manufacturer Kingston
Serial Number
Asset Tag Number
Part Number 9905625-029.A00G

http://www.tenforums.com/bsod-crashes-debugging/36122-various-bsods-ntoskrnl-exe-seems-fault.html
Relevancy 55.9%

Hi there everyone at techsupport Well Am Gautam from INdia Ok here goes my story I have a ASUS P C Delux motherboard - days back i started to get the usual blue screen of death saying that quot DRIVER IRQ NOT LESS OR EQUAL quot then some memory dump and i have to restart my Repeated card BSODs, fault ? at NIC PC Repeated BSODs, NIC card at fault ? And after booting the dialogue box on the windows screen said quot Windows has encountered a serious error the device quot Asus Repeated BSODs, NIC card at fault ? v Pro seems to be responsible quot etc But then i noticed a very unusual activity with my network card I have a cable connection with a modem installed My Lan card is com Gigabit C on board So at many times i used Repeated BSODs, NIC card at fault ? to get the error quot Network cable unplugged quot even when the modem Lan led kept on The surprising thing was that when i used to get this unplugged error the modem cable LAN led didnt went off which made me think that there is no physical disconnection of the cable with the lan card SO when i used to get this uplugged error i have to disable the lan card and enable it once again which allowed me to surf for around - minutes and then again the error poped up And the important thing is that sometimes while enabling the card my screen used to go blank for a second and another blue screen used o come saying that STOP error PAGE FAULT IN NON PAGED AREA Some problematic file pciide sys encountered error i dont exactly know what was there on the screen So i thought that might be my onbard LAN and AGP-PCI i have a pci based asus mb card would be having some IRQ conflict SO i moved my PCI display card to another slot and now my windows system information application says quot IRQ Com Gigabit LOM C OK quot and quot IRQ NVIDIA GeForce MX MX OK quot But nothing helped SO i fianlly disabled my LAN card and intalled the modem using the USB cable After installing the drivers for the modem and doing the necessary settings i have my internet connection up and running without any disconnections or crashes NOW I WANT TO KNOW WHAT EXACTLY HAPPENED IS MY ONBOARD NIC CARD FAULTY IF YES THEN HOW SHOULD I CONFIRM IT SO THAT I CAN SEND MY MOTHERBOARD FOR REPLACEMENT Though i tried enabling the onboard lan card which obviously now shows cable unplugged as i have connected my modem through usb and still the PC doesnt crashes Kindly give me some feedback as i want to know the root cause of this problem as to why i was getting BSOD s and system freezes when my modem was connected to my on board NIC THanks waiting for ur reply Gautam nbsp

A:Repeated BSODs, NIC card at fault ?

welcome to techspot.



NOW I WANT TO KNOW WHAT EXACTLY HAPPENED????? IS MY ONBOARD NIC CARD FAULTY?? IF YES, THEN HOW SHOULD I CONFIRM IT SO THAT I CAN SEND MY MOTHERBOARD FOR REPLACEMENT??Click to expand...

the errors you reported are the result of a hardware problem. run the computer in each of the following configurations until you get a system error or the machine runs flawlessly for a day or two:
-with the onboard NIC on and connected to the modem
-with the onboard NIC on but not connected to anything
-with the onboard NIC disabled in your bios

at a glance, it seems likely that your problems were caused by faulty hardware, but these steps are important for diagnosing the problem.
 

http://www.techspot.com/community/topics/repeated-bsods-nic-card-at-fault.24990/
Relevancy 55.47%

Hello BSODs Frequent I Frequent BSODs have a year old ASUS notebook Soon after I got it I started experiencing BSODs occasionally With time Frequent BSODs they got more frequent and most likely I get a BSOD every time I start windows after a random not-too-long period of time I ran the checkmem test Frequent BSODs to eliminate the possibility of a failed RAM This is my setup Windows Home Premium bits ASUS UL A Processor Core DUO SU Wifi adapter Atheros RAM GB HDD GB As a side note I installed Ubuntu on a second partition and it is much more stable but in rare occasions the notebook crashes and reboots suddenly Another piece of data I got this notebook the day Windows was officially launched I don't know if that would not matter considering the updates I am attaching a few of the many dumps I have so far I will greatly appreciate any help on this I love the notebook it is fast very slim quiet but it is pretty much useless while operating with Windows OS Thank you very much Clara

A:Frequent BSODs

Hi, Clara; and welcome to the forum. Sorry that you are having trouble. Please read these threads and post back. We will be glad to help you. That will give us more information than the dumps provide.

[1 - Novice] How to ask for help with a BSOD problem

http://www.sevenforums.com/crashes-d...tructions.html

http://www.sevenforums.com/bsod-help-support/122865-frequent-bsods.html
Relevancy 55.47%

Hi everyone
 
 I experience frequent BSODs maybe once every two months .Don't know if it is virus or hardware  problem I will  appreciate if you read
my reports and logs.
 
And I cant save performance report as a zip file . It says archive is in other format or is damaged.
 
Thank you everyone
MessiFan

http://www.bleepingcomputer.com/forums/t/626555/frequent-bsods/
Relevancy 55.47%

OS - Windows or Vista Windows x -bit or BSODs Frequent x bit What was the original Frequent BSODs installed OS on the system Windows Is Frequent BSODs the OS an OEM version came pre-installed Frequent BSODs on system or full retail version YOU purchased it from retailer I purchased my copy of Windows Approximate age of system hardware - months Approximate age of OS installation if you know months Have you re-installed the OS Yes I was getting bluescreens about months ago and tried seeking help Getting BSODs from playing games browsing the web etc - Windows Help Forums some logs are there but ended up just re-installing Windows to see if that would solve the issue I was bluescreenless for about a month and then got or bluescreens in August I am constantly getting bluescreens now CPU i - k GHZ stock speed Video Card EVGA GTX Factory overclocked MotherBoard AsRock Z Pro Power Supply - brand amp wattage SeaSonic W Platinum Certified Laptop or Desktop Desktop I ran a Memtest test for passes about a week ago and came back with no errors I went to Intel Driver Update Utility and updated whatever drivers the site found that were out of date I updated my NVidia drivers about days ago when they released a new driver for my GPU I un-installed and did a clean installation of the graphic card drivers today My CPU GPU always hover around - C so I don't think overheating is the issue I can tell you that I remember my FIRST bluescreen issues started occurring after I tried overclocking my processor using my motherboard's built-in overclocking tool since then I have not tried to overclock my processor and I have re-installed my OS

A:Frequent BSODs

Code:
fffff800`00b9c788 fffff800`02e86169 : 00000000`0000000a 0000175b`03316a66 00000000`0000000a 00000000`00000001 : nt!KeBugCheckEx
fffff800`00b9c790 fffff800`02e84de0 : 00000000`00000000 fffffa80`08d947b8 fffffa80`0890d000 fffffa80`0825c1a0 : nt!KiBugCheckDispatch+0x69
fffff800`00b9c8d0 fffff880`040dfbda : fffff880`014e3440 fffffa80`0aef4060 fffff800`03400895 fffff800`03426460 : nt!KiPageFault+0x260
fffff800`00b9ca68 fffff880`014e3440 : fffffa80`0aef4060 fffff800`03400895 fffff800`03426460 fffff800`00b9cb30 : e1d62x64+0x18bda
fffff800`00b9ca70 fffff800`02e82a1c : fffff800`03001e80 fffff800`00b9cb00 00000000`00000000 00000000`00000000 : ndis!ndisMiniportMessageIsr+0x60
fffff800`00b9cab0 fffff800`02e7e8a2 : fffff800`03001e80 fffff800`00000001 00000000`00000001 fffff880`00000000 : nt!KiInterruptDispatch+0x16c
fffff800`00b9cc40 00000000`00000000 : fffff800`00b9d000 fffff800`00b97000 fffff800`00b9cc00 00000000`00000000 : nt!KiIdleLoop+0x32
Here we can see an interrupt occurring, it's then interrupted the CPU, saved the context and raised the IRQL. Then the NDIS miniport ISR takes control and services the interrupts


Code:
0: kd> !irql
Debugger saved IRQL for processor 0x0 -- 10
Hence our IRQL of 10 which is a device IRQL.
The interrupt involves the network driver doing some work, it accesses pageable or invalid memory which incurs a page fault and that isn't allowed, don't forget we're still at a high IRQL. That's why we bugchecked.


Code:
0: kd> lmvm e1d62x64
start end module name
fffff880`040c7000 fffff880`04143000 e1d62x64 T (no symbols)
Loaded symbol image file: e1d62x64.sys
Image path: e1d62x64.sys
Image name: e1d62x64.sys
Timestamp: Thu May 30 16:54:37 2013 (51A7763D)
CheckSum: 000866A7
ImageSize: 0007C000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Your Intel Gigabit Adapter NDIS 6.x driver is outdated by over a year so I suggest updating it.

http://www.techsupportforum.com/forums/f299/frequent-bsods-896570.html
Relevancy 55.47%

Hi I have the BSOD which has occured twice today could someone help me out please Microsoft R Windows Debugger Version X Copyright c Microsoft Corporation All rights reserved Loading Dump File C WINDOWS Minidump Mini - dmp Mini Kernel Dump File Only registers and stack trace are available Symbol search path is SRV c symbols http msdl microsoft com download symbols Executable search path is Windows XP Kernel Version Service Pack MP procs Free x compatible Product WinNt suite TerminalServer SingleUserTS Built by xpsp sp gdr - Kernel base x d PsLoadedModuleList x d Debug session time Sat Nov GMT System Uptime days Loading Kernel Symbols BSODs HELP-FREQUENT Loading User Symbols Loading unloaded module list Bugcheck Analysis Use analyze -v to get detailed debugging information BugCheck A e Probably caused by ntkrpamp exe nt CcFlushCache f Followup MachineOwner --------- kd gt analyze -v Bugcheck Analysis IRQL NOT LESS OR EQUAL a An attempt was made to access a pageable or completely invalid address at an interrupt request level IRQL that is too high This is usually caused by drivers using improper addresses If a kernel debugger is available get the stack backtrace Arguments Arg memory referenced Arg IRQL Arg bitfield bit value read operation write operation bit value not an execute operation execute operation only on chips which support this level of status Arg e address which referenced memory Debugging Details ------------------ READ ADDRESS CURRENT IRQL FAULTING IP nt CcFlushCache f e b mov esi dword ptr eax CUSTOMER CRASH COUNT DEFAULT BUCKET ID DRIVER FAULT BUGCHECK STR xA PROCESS NAME System LAST CONTROL TRANSFER from e c to e STACK TEXT bace cf e c nt CcFlushCache x f bace d e db b b nt CcWriteBehind x bace d c d b b nt CcWorkerThread HELP-FREQUENT BSODs x f bace dac cff b nt ExpWorkerThread xef bace ddc ee e HELP-FREQUENT BSODs nt PspSystemThreadStartup x nt KiThreadStartup x STACK COMMAND kb FOLLOWUP IP nt CcFlushCache f e b mov esi dword ptr eax SYMBOL STACK INDEX SYMBOL NAME nt CcFlushCache f FOLLOWUP NAME MachineOwner MODULE NAME nt IMAGE NAME ntkrpamp exe DEBUG FLR IMAGE TIMESTAMP a fbd FAILURE BUCKET ID xA nt CcFlushCache f BUCKET ID xA nt CcFlushCache f Followup MachineOwner --------- nbsp

Relevancy 55.47%

I've suddenly been getting a lot of BSODs at apparently random times lately They've occurred while I wasn't running any particular applications and lately they have been occurring during start up as well My PC is BSODs Frequent running Windows Home Premium x with service pack I think the motherboard is an an Asus P QPL Pro motherboard sorry I'll have to check that again soon with an Intel Core Duo CPU and an Asus HD mb PCI Express Graphics Card Frequent BSODs I suspect that there is a problem with my graphics card but I wanted to be sure it wasn't something else I have updated the graphics driver but am still having problems Below is the crash dump analysis from WhoCrashed --------------------------------- On Tue AM your computer crashed This was likely caused by the following module hardware Bugcheck code x E xFFFFFFFFC xFFFFFA AC xFFFFFA AEC xFFFFFA AE Error SYSTEM THREAD EXCEPTION NOT HANDLED M Dump file C Windows Minidump Mini - dmp On Mon AM your computer crashed This was likely caused by the following module ntoskrnl exe Bugcheck code x E x xB E x xB DF Error PFN LIST CORRUPT Dump file C Windows Minidump Mini - dmp file path C Windows system ntoskrnl exe product Microsoft Windows Operating System company Microsoft Corporation description NT Kernel amp System The crash took place in a standard Microsoft module Your system configuration may be incorrect possibly the culprit is in another driver on your system which cannot be identified at this time On Sun AM your computer crashed This was likely caused by the following module atikmdag sys Bugcheck code x E xFFFFFFFFC xFFFFFA FC xFFFFFA D A xFFFFFA D E Error SYSTEM THREAD EXCEPTION NOT HANDLED M Dump file C Windows Minidump Mini - dmp file path C Windows system drivers atikmdag sys product ATI Radeon Family company ATI Technologies Inc description ATI Radeon Kernel Mode Driver On Sun AM your computer crashed This was likely caused by the following module win k sys Bugcheck code xD xFFFFF E D x x xFFFFF D F Error DRIVER PORTION MUST BE NONPAGED Dump file C Windows Minidump Mini - dmp file path C Windows system win k sys product Microsoft Windows Operating System company Microsoft Corporation description Multi-User Win Driver The crash took place in a standard Microsoft module Your system configuration may be incorrect possibly the culprit is in another driver on your system which cannot be identified at this time On Thu PM your computer crashed This was likely caused by the following module watchdog sys Bugcheck code x xFFFFFA AE CC x xFFFFFA B AC x Error PAGE FAULT IN NONPAGED AREA Dump file C Windows Minidump Mini - dmp file path C Windows system drivers watchdog sys product Microsoft Windows Operating System company Microsoft Corporation description Watchdog Driver The crash took place in a standard Microsoft module Your system configuration may be incorrect possibly the culprit is in another driver on your system which cannot be identified at this time On Thu AM your computer crashed This was likely caused by the following module ntoskrnl exe Bugcheck code x E xFFFFFFFFC xFFFFF BA E x x DCD Error KMODE EXCEPTION NOT HANDLED Dump file C Windows Minidump Mini - dmp file path C Windows system ntoskrnl exe product Microsoft Windows Operating System company Microsoft Corporation description NT Kernel amp System The crash took place in a standard Microsoft module Your system configuration may be incorrect possibly the culprit is in another driver on your system which cannot be identified at this time On Thu AM your computer crashed This was likely caused by the following module ntoskrnl exe Bugcheck code x E xFFFFFFFFC xFFFFF EA E x xFFFFFFFFFFFFFFFF Error KMODE EXCEPTION NOT HANDLED Dump file C Windows Minidump Mini - dmp file path C Windows system ntoskrnl exe product Microsoft Windows Operating System company Microsoft Corporation description NT Kernel amp System The crash took place in a standard Microsoft module Your system configuration may be incorrect possibly the culp... Read more

A:Frequent BSODs

Hello Regnak,
I think i would start by removing all but one stick of ram and trying it, see if you get a BSOD with just one stick at a time, if all goes well swap the stick over and try another one, this will eliminate the ram one way or the other.
Check the temps of the MB and your graphics card too.
Do you have another card you could try if you think that is the problem ?.

Read this article through and see if there are any drivers that may be causing this.

How to identify a buggy device driver on Windows Vista | Vista Rewired

Just to make sure your system files are OK open a command prompt as administrator and type sfc/scannow press enter and let it scan, if errors are found you may need to scan more than once.
Also, go to your HDD makers site and download the diagnostic software for your HDD, run this and check for errors.

Try this and post your results, good luck.

http://www.vistax64.com/crashes-debugging/279318-frequent-bsods.html
Relevancy 55.47%

Hello Bleeping people (is that being rude?),
Since December of last year my computer of a few months old started to BSOD frequently, as in several times a day, at seemingly random moments doing different things.
I since tried a number of things and even shipped the entire thing back to the company that built it for me. They returned it recently, yet the problem persists. Obviously they didn't do a very good job.
I don't know what's wrong. Could you please help me figure out what to do next?
Speccy:
http://speccy.piriform.com/results/QzUtB1YdlZLha2xnF6CsrvN
I'm including the last 10 event viewer logs, installed programs and list of users, partitions and memory size as generated by MiniToolBox as an attached file.
My apologies that some of it may be in Dutch as that's what the operating system is set to, but I trust it shouldn't be too much of an issue for you clever people.

A:Frequent BSODs

They returned it recently, yet the problem persists. Obviously they didn't do a very good job.
 
 
 
ship it back....they are not done with it yet, or get your money back,
 
if i bought a new car that broke down after 4 months, i sure as heck wouldn't try to fix it myself

http://www.bleepingcomputer.com/forums/t/567146/frequent-bsods/
Relevancy 55.47%

I'm on a bit over year-old HP Pavillion dvt7 with Vista Home Premium x64 SP2 full retail. I had been experiencing frequent, similar, crashes and BSODs a couple of months ago and had searched to resolve the problem, but they stopped entirely until now so I had forgotten about them. They have started up again and occur seemingly at random. Occasionally a crash followed by a BSOD will happen while I am watching a movie; the sound stutters and the video freezes, then the computer crashes. The issue has not disabled my computer but is, as you may imagine, a great inconvenience.

Thank you for your time.

A:Frequent BSODs

You have given me one report. TBH, BSODs can very rarely be solved on the basis of one report. Can you give me all the others that you have had.
In either case, I will try my best to help. Waiting for your reply.

http://www.vistax64.com/crashes-debugging/287543-frequent-bsods.html
Relevancy 55.47%

Hi,

I have been having BSODs for a long while now but they have been rare, but now they happen much more often. I'd appreciate if someone can look into the files and tell me whats wrong.. Thanks alot.

A:Very frequent BSODs, please look into it..

Please post the report of Windows Genuine and Activation Issue Posting Instruction

http://www.sevenforums.com/bsod-help-support/397309-very-frequent-bsods-please-look-into.html
Relevancy 55.47%

Frequent BSODs Usually occur the instant I click on something although it has occurred during times when keyboard mouse are idle Most frequent when the TV is on and browsing the internet Firefox Crashes Frequent BSODs with IE also Least frequent when neither above are running Has occurred in safe mode Has occurred during attempted backup running under Active Boot Disk under Vista PE Best attempt to restore a backup image is minutes running before crashing Has not occurred while running dos environment diagnostics Frequent BSODs such as Spinrite Hiren s Boot CD Ultimate Boot CD I can provide an unload of BlueScreenView which shows all minidump entries with the bugcheck code and parms - along with the last stack entries names SYSTEM gb memory CPU AMD Athlon XP ghz Never overclocked Mobo SOYO SY-KT -Dragon Platinum Ultra Video Ati ALL-IN-WONDER RADEON Display adapter Tried Blow dust from all fans Reseat CPU Heatsink Apply new Silicon None of original was left Core temp degrees celsius not much change from prior Replaced memory had errors on both mb sticks now gb Swapped video cards Various op-sys various drives each on separate drives OSL- multi-booting Getting similar results on all systems Winxp Home SP ran sys file verify ran repair install reinstalled all drivers No updates applied Was a firm believer in not accepting MS updates Heard many war stories of performance hits after MS updates Also many forced re-installs early days of ME and some of XP Copy of above using as backup Can no longer run long enough to create image Frequent BSODs backup Winxp SP clean install Windows RTM dl ed from MS clean install Swapped new power supply Replaced CMOS battery Running AVAST free version Malware bytes First few runs of the above found a lot of trojans due to having to run without router firewall for a time router was disabled Can a trojan or rootkit cause frequent bsods If yes just Frequent BSODs tell me now and help me identify it and will replace the cpu mobo memory I cannot run GMER rootkit fixer because it crashes in bsod just before filling the first page of output Using current version Rootkit revealer runs but doesnt find anything Tried a few runs of HijackThis using a few posts here as a guide but not familiar with the tactics used I am a bit concerned about the machine checks in the event log due to the log viewer link takes me to a MS explanation definition which seems nebulus Having had a Mainframe IBM S background in application system design and analysis machine check always meant some kind of CPU error unexecutable code I built this system from scratch components in the fall of and I still love it Help me find a reason not to replace cpu mobo memory I have ruled out or swapped the rest of hardware I see that combofix is not currently available as of Wed nite I ve been reading some of the posts to become familiar with protocol here

A:Frequent BSODs

yes a virus can cause a blue screen , i recommend you set avast to do a "on boot scan" see below for instructions

To schedule boot scan using Avast, follow the steps below:-
Right click on the Avast system tray icon
Click on ?Start Avast Anti Virus?
Avast anti virus window will pop up and run a memory scan
Once memory scan finish, you can right click on the Avast anti virus window and select ?Schedule Boot Time Scan?
?Schedule Boot Time Scan? window will popup, select ?Scan all local disk? and check on ?Advanced Options?
For normal infected file select ?Move infected files to Chest? and select ?No action? for system files and Press ?Schedule? button.
Avast will prompt you for restart to perform the Boot time scan and click ?Yes? to reboot and start the scan.
Done you have just scheduled a boot time scan from Avast anti virus

http://www.bleepingcomputer.com/forums/t/279713/frequent-bsods/
Relevancy 55.47%

I just recently started getting multiple bsods in a row. Before it used to be sporadic but it has increased in frequency today and today only. It would boot up windows normally but after I login, it would immediately give me a bsod. I used to have a legacy sound card installed but removed it when experiencing sporadic bsods months ago.

This computer last night tried to download and install the new service pack and I do not know if it completed. (this is my gf's computer and cannot describe what she did)

Just some general info, Windows 7 64bit home edition.
Hardware is a 1.5 years old. OS installation is also about same age.
I have included a zip file for your use. Thanks a lot for looking!

A:Frequent BSODs

  
Quote: Originally Posted by cscbeef


I just recently started getting multiple bsods in a row. Before it used to be sporadic but it has increased in frequency today and today only. It would boot up windows normally but after I login, it would immediately give me a bsod. I used to have a legacy sound card installed but removed it when experiencing sporadic bsods months ago.

This computer last night tried to download and install the new service pack and I do not know if it completed. (this is my gf's computer and cannot describe what she did)

Just some general info, Windows 7 64bit home edition.
Hardware is a 1.5 years old. OS installation is also about same age.
I have included a zip file for your use. Thanks a lot for looking!


Memory management probably caused by asacpi.sys.

I would
1-ASACPI.SYS a major cause of BSOD's in the 2005 rev.

The pre 2009 version of this driver is a known BSOD cause.

The 2005 version of this driver is a known BSOD cause.
Please visit this link: ASUS teK Computer Inc. -Support- Drivers and Download P7P55D LE
ASUSTeK Computer Inc. -Support- Drivers and Download P7P55D LE

Scroll down to the Utilities category, then scroll down to the "ATK0110 driver for WindowsXP/Vista/Windows 7 32&64-bit" (it's about the 12th item down).
Download and install it.
Go to C:\Windows\System32\drivers to check and make sure that the ASACPI.sys file is date stamped from 2009 or 2010 (NOT 2005).
2- Run memtest
Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program.

Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

http://www.sevenforums.com/bsod-help-support/176517-frequent-bsods.html
Relevancy 55.47%

Hi there. I have been getting lots of blue screens this summer after overheating issues. I think they're hardware related but I don't know how to check. I just reinstalled windows and reformatted my main hard drive (I have a 30 gb solid state for my OS and a 500gb for files and games and such)

It is a custom built rig.

? OS - Windows 7 32 bit Full Retail edition
? CPU is about 4 years old, video card about 3 years old and RAM was bought this year. It's a frankenstein of sorts.
? I just reinstalled OS 2 days ago.

? AMD Phenom II quad core 955 processor 3.2 ghz
? NVIDIA GeForce GTx 460
? Not sure what the motherboard is

A:Frequent BSODs

Forgot to put the dumps in here.

Also, I've been getting very bad performance with full screen video. Most of the time when I blue screen it's because of youtube or a fullscreen game. Chrome has been crashing unexpectedly a lot as well. Video card/RAM issues?

http://www.techsupportforum.com/forums/f299/frequent-bsods-660729.html
Relevancy 55.47%

Hi As the title states I've been getting BSODs for what appears to have been the past several months with occurring within the past hours The BSODs occur the most when I am asleep I did witness one just yesterday before the one I woke up to just earlier however it did not seem to generate any report or dumps From what I am aware it might be something to do with my drivers I found they were occurring quite frequently when I updated my graphics driver to the latest version I tried downgrading back to an earlier version but it didn't help either I play games quite frequently on this one being a MMORPG and I tend to have multiple clients of this open and they tend to be idle a lot I'm also suspecting that these clients might BSODs Frequent be contributing to this issue as the game is known to be bad for its memory leaks Problem signature Problem Event Name BlueScreen OS Version Locale ID Additional information about the problem BCCode BCP A A D A BCP B B EF FD A BCP FFFFF D BCP OS Version Service Pack Product I have attached a zip file containing dumps collected from SF Diagnostic Tool I hope you can help Frequent BSODs I'm not too good at diagnosing these things myself

A:Frequent BSODs

Hello and welcome Lauren now just a few simple things you can do are these if you haven't already

http://www.sevenforums.com/tutorials/1538-sfc-scannow-command-system-file-checker.html

http://www.sevenforums.com/tutorials/433-disk-check.html

http://www.superantispyware.com/

http://www.malwarebytes.org/products/malwarebytes_free/

http://www.bleepingcomputer.com/download/adwcleaner/

ADW download from bleeping computer delete any rubbish found with the malware scans

You might just have a look at the temps and other specs with Speccy or HW Info
the latter is best but it is up to you which one you use.
http://www.piriform.com/speccy/download

http://www.hwinfo.com/download.php download the one in the pic. but don't download any of the other stuff that will pop up for tuning the PC up etc etc On the small screen just hit run.

http://www.sevenforums.com/bsod-help-support/320794-frequent-bsods.html
Relevancy 55.47%

Hello,
Recently my computer has started to have frequent blue screens, and I don't understand why. They are all the same two types of blue screens.

I have tried running disk check, memory check, system diagnostics, everything passed. I ran multiple virus scans, with no results. I did notice that the running temperature of my graphics card reaches more than of 80 degrees C when running at high capacity, but I've never had my computer crash while running a game or other high-CPU program. The crashes seem to be completely random.

Thanks for your help!

OS: Windows 7 64-bit
OS is OEM, and is the original installed OS
System is 2 years old approx.
OS installation is 3 months old approx.
I have reinstalled the OS, once, using the Dell Alienware Alien Respawn tool.

CPU: Intel Core i5-3330 @ 3.0 Ghz 3001 Mhz 4 Cores
Motherboard: Alienware 08PG26
Power Supply: Alienware 330 Watt
Manufacturer: Dell
Model: Alienware X51
Desktop

A:Frequent BSODs

UPDATE:

I ran a disk check again, and it came up with an error message. It froze the computer, then when I turned it off and restarted, it said I had no HDD. I took out the hard drive and reseated it, and Windows came back just fine.

The bad disk check did not create a log file, unfortunately, but it said that it did not have enough space on the hard drive to repair a series of bad sectors. I'm not sure what this means.

http://www.techsupportforum.com/forums/f299/frequent-bsods-1022554.html
Relevancy 55.47%

I have been getting frequent BSODs with various reasons within one day..I am attaching the dump files here from 3 different days..I am a beginner in this case and an expert help would be very helpful...

Please help...

Is Windows 7 . . . Yes
- x86 (32-bit) or x64 ? 64 bit
- the original installed OS on the system? Yes
- an OEM or full retail version? Full retail


- What is the age of system (hardware)? 1 year
- What is the age of OS installation (have you re-installed the OS?) less than 1 month

someone please help!

A:Frequent BSODs...Please help...

Hi Steffin.

Please follow these directions:

http://www.sevenforums.com/crashes-d...tructions.html

http://www.sevenforums.com/bsod-help-support/206352-frequent-bsods-please-help.html
Relevancy 55.47%

Last days I get a lot of BSODs, mostly saying: irql_not_less_or_equal.

I have an Acer Aspire 8920G with Windows 7 Professional.

A:Frequent BSODs

I've already run Malwarebyte's anti malware, but this didn't fix te problem.
The Memtest86 program didn't help either.

Is there anyone who can help me please?

http://www.sevenforums.com/bsod-help-support/170367-frequent-bsods.html
Relevancy 55.47%

Hi I'm getting pretty frequent BSODs when I'm using my computer. Attached is the file I got after going through all the steps and using the diagnostic tool. As a note every time it crashes and goes to the blue error screen where it says it's collecting information it goes to 100% but never restarts so I have to manually restart it so if there are any issues with the file or you need anymore information just let me know. Thank you.

A:Frequent BSODs

These devices have problems in Device Manager:





USB-IF xHCI USB Host Controller ROOT\UOIP_BUS_DRIVER\0000 This device is not working properly because Windows cannot load the drivers required for this device.

Bluetooth Device (Personal Area Network) BTH\MS_BTHPAN\7&3F48110&1&2 This device is disabled.



In Device Manager, p7Please right click on the xHCI device and select "Uninstall". Reboot the system and check to be sure that any error with the xHCI device has been resolved.

As for the Bluetooth device, it is disabled. Is this deliberate? If so, why?
Please re-enable the device and update it to the latest, Win8.1 compatible drivers. If you so desire, feel free to disable it again.

MSI Afterburner and Riva Tuner (along with EVGA Precision) are known to cause BSOD's in some Windows systems (it's driver is usually RTCore64.sys). Please un-install them immediately!

If you're overclocking, please stop the overclock while we're troubleshooting. Feel free to resume the overclock once the system has been stabilized.

Please update these older drivers. Links are included to assist in looking up the source of the drivers. If unable to find an update, please remove (un-install) the program responsible for that driver. DO NOT manually delete/rename the driver as it may make the system unbootable! :

npf.sys Fri Jun 25 12:50:58 2010 (4C24DE72)
NetGroup Packet Filter Driver, part of the WinPcap packet capture library
http://www.carrona.org/drivers/driver.php?id=npf.sys

tapoas.sys Sun Jul 11 20:31:59 2010 (4C3A627F)
OpenVPN Virtual Network Driver
http://www.carrona.org/drivers/driver.php?id=tapoas.sys

CLVirtualDrive.sys Mon Dec 26 08:26:47 2011 (4EF87617)
CyberLink Virtual Device Driver
http://www.carrona.org/drivers/driver.php?id=CLVirtualDrive.sys

Please note the drivers below that date from before the release of Windows 8.1 (17 Oct 2013) - check to see that each and every one is compatible w/Windows 8.1 (at the manufacturer's website). If not, you must either remove the device and it's software - or locate a Windows 8.1 compatible update on the web. Removing some drivers may make the system unstable - so if you're unable to find updates, post back for info on the one's that can/cannot be safely removed.

The drivers that are struckout don't have updates available (AFAIK).
DO NOT delete them, just leave them be.

Beyond this, as there was only 1 memory dump in the upload, I have these 4 suggestions:
1. Get ALL available Windows Updates. It may take several trips to get them all
2. Get ALL available, Win8.1 compatible updates from the manufacturer's website.
3. Start with these free hardware diagnostics: Hardware Diagnostics
4. If all of the hardware tests pass, then run Driver Verifier according to these instructions: Driver Verifier Settings

Analysis:
The following is for informational purposes only.

Code:
**************************Sun Nov 2 23:26:22.526 2014 (UTC - 5:00)**************************
Loading Dump File [C:\Users\John\SysnativeBSODApps\110214-23500-01.dmp]
Windows 8 Kernel Version 9600 MP (4 procs) Free x64
Built by: 9600.17328.amd64fre.winblue_r3.140827-1500
System Uptime:0 days 2:36:11.298
*** WARNING: Unable to verify timestamp for igdkmd64.sys
*** ERROR: Module load completed but symbols could not be loaded for igdkmd64.sys
Probably caused by :igdkmd64.sys ( igdkmd64+638e3 )
BugCheck D1, {30, 2, 1, fffff800554da8e3}
BugCheck Info: DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
Arguments:
Arg1: 0000000000000030, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000001, value 0 = read operation, 1 = write operation
Arg4: fffff800554da8e3, address which referenced memory
BUGCHECK_STR: AV
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
PROCESS_NAME: dwm.exe
FAILURE_BUCKET_ID: AV_igdkmd64+638e3
CPUID: "Intel(R) Core(TM) i5-3210M CPU @ 2.50GHz"
MaxSpeed: 2500
CurrentSpeed: 2494
BIO... Read more

http://www.eightforums.com/bsod-crashes-debugging/56461-frequent-bsods.html
Relevancy 55.47%

My system has begun crashing two or three times a day for the past three or four days.

BSOD Dump and Health report are attached in the zip file.

Any suggestions will be greatly appreciated.

Bob M.

A:Frequent BSODs

  
Quote: Originally Posted by rdmacl


My system has begun crashing two or three times a day for the past three or four days.

BSOD Dump and Health report are attached in the zip file.

Any suggestions will be greatly appreciated.

Bob M.


Love to help but zip file is corrupt. Try this method.


To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

The procedure:

* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.

To ensure minidumps are enabled:

Go to Start, in the Search Box type: sysdm.cpl, press Enter.
Under the Advanced tab, click on the Startup and Recovery Settings... button.
Ensure that Automatically restart is unchecked.
Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
OK your way out.
Reboot if changes have been made.

http://www.sevenforums.com/bsod-help-support/157703-frequent-bsods.html
Relevancy 55.47%

I think I've got a virus because windows defender was turned off and I couldn't turn it back on. (plus many BSODs)

After a few restarts, the whole security center was turned off (and I couldn't turn it back on).

I loaded a system restore point and it turned the security center back on, but the BSODs keep happening and I can't run malwarebytes anti-malware without getting a BSOD. (even in safe mode)

I've attached the zip of the sevenforums folder that sf diagnostic tools created.

note: I can't seem to attach the file! it gets stuck at 79% and goes back to 0% (it's a 48mb file)

A:Help! I've got frequent BSODs

  
Quote: Originally Posted by fliz


I think I've got a virus because windows defender was turned off and I couldn't turn it back on. (plus many BSODs)

After a few restarts, the whole security center was turned off (and I couldn't turn it back on).

I loaded a system restore point and it turned the security center back on, but the BSODs keep happening and I can't run malwarebytes anti-malware without getting a BSOD. (even in safe mode)

I've attached the zip of the sevenforums folder that sf diagnostic tools created.

note: I can't seem to attach the file! it gets stuck at 79% and goes back to 0% (it's a 48mb file)



File size limit is 8 Mb. All we really need ouot of that folder is the *.dmp file and when zipped it should be eay to upload

Let us know if y ou need help with it
Ken

http://www.sevenforums.com/bsod-help-support/74280-help-ive-got-frequent-bsods.html
Relevancy 55.47%

Hi!
Recently my laptop starts crashing a lot. I don't know what's the problems are.


Windows 7 is. . .
- x64
- the original installed OS on the system? yes
- an OEM or full retail version? OEM
- OEM = came pre-installed on system
- Full Retail = you purchased it from retailer

- What is the age of system (hardware)? almost a year.
- What is the age of OS installation (have you re-installed the OS?) no

Thanks a lot.

A:Frequent BSODs!

Hello,

It seems you have two main issues going on.

1) A bug in Windows is showing its head, which is addressed in SP1. See here for instructions on installing it: Learn how to install Windows 7 Service Pack 1 (SP1)

If you install SP1, you won't have to uninstall ZoneAlarm, which is the program the bug shows itself on the most often.

2) Your Atheros wireless drivers. Install updated ones from here: http://global-download.gateway.com/G...TEWAY&SC=PA_6G


Code:
athrx.sys Mon Sep 21 14:00:40 2009 (4AB7BF48)
...Summary of the dumps:

Code:

Built by: 7600.16792.amd64fre.win7_gdr.110408-1633
Debug session time: Tue May 24 13:04:51.721 2011 (UTC - 4:00)
System Uptime: 0 days 18:33:09.531
*** ERROR: Module load completed but symbols could not be loaded for pci.sys
Probably caused by : pci.sys
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x9F
PROCESS_NAME: System
FAILURE_BUCKET_ID: X64_0x9F_3_athrx_IMAGE_pci.sys
BiosReleaseDate = 10/22/2009
SystemProductName = NV53
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7600.16792.amd64fre.win7_gdr.110408-1633
Debug session time: Mon May 23 13:08:49.614 2011 (UTC - 4:00)
System Uptime: 3 days 23:32:58.354
*** ERROR: Module load completed but symbols could not be loaded for pci.sys
Probably caused by : pci.sys
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x9F
PROCESS_NAME: System
FAILURE_BUCKET_ID: X64_0x9F_3_athrx_IMAGE_pci.sys
BiosReleaseDate = 10/22/2009
SystemProductName = NV53
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7600.16695.amd64fre.win7_gdr.101026-1503
Debug session time: Sun May 8 22:43:00.005 2011 (UTC - 4:00)
System Uptime: 0 days 0:04:59.815
Probably caused by : ntkrnlmp.exe ( nt!KiDoubleFaultAbort+b2 )
BUGCHECK_STR: 0x7f_8
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: System
FAILURE_BUCKET_ID: X64_0x7f_8_nt!KiDoubleFaultAbort+b2
BiosReleaseDate = 10/22/2009
SystemProductName = NV53
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7600.16695.amd64fre.win7_gdr.101026-1503
Debug session time: Sun May 8 22:36:59.897 2011 (UTC - 4:00)
System Uptime: 3 days 8:04:35.691
Probably caused by : ntkrnlmp.exe ( nt!KiDoubleFaultAbort+b2 )
BUGCHECK_STR: 0x7f_8
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: System
FAILURE_BUCKET_ID: X64_0x7f_8_nt!KiDoubleFaultAbort+b2
BiosReleaseDate = 10/22/2009
SystemProductName = NV53
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7600.16695.amd64fre.win7_gdr.101026-1503
Debug session time: Thu May 5 11:50:45.378 2011 (UTC - 4:00)
System Uptime: 0 days 5:19:24.173
*** ERROR: Module load completed but symbols could not be loaded for pci.sys
Probably caused by : pci.sys
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x9F
PROCESS_NAME: chrome.exe
FAILURE_BUCKET_ID: X64_0x9F_3_athrx_IMAGE_pci.sys
BiosReleaseDate = 10/22/2009
SystemProductName = NV53
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7600.16695.amd64fre.win7_gdr.101026-1503
Debug session time: Tue May 3 14:56:01.659 2011 (UTC - 4:00)
System Uptime: 0 days 14:03:39.469
*** ERROR: Module load completed but symbols could not be loaded for pci.sys
Probably caused by : pci.sys
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x9F
PROCESS_NAME: iTunes.exe
FAILURE_BUCKET_ID: X64_0x9F_3_athrx_IMAGE_pci.sys
BiosReleaseDate = 10/22/2009
SystemProductName = NV53
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7600.16792.amd64fre.win7_gdr.110408-1633
Debug session time: Mon Jul 4 07:09:07.380 2011 (UTC - 4:00)
System Uptime: 0 days 0:05:27.190
*** ERROR: Sym... Read more

http://www.sevenforums.com/bsod-help-support/173125-frequent-bsods.html
Relevancy 55.47%

So I'd like some help, as I've been getting Blue Screens all the time.

My OS is Windows 7 Ultimate x64, it's the original OS on the system, and it's an OEM version. The hardware is 1 year old, as is the OS.

Whatever help you guys could give me would be entirely appreciated!

A:Very frequent BSODs

  
Quote: Originally Posted by silever731


So I'd like some help, as I've been getting Blue Screens all the time.

My OS is Windows 7 Ultimate x64, it's the original OS on the system, and it's an OEM version. The hardware is 1 year old, as is the OS.

Whatever help you guys could give me would be entirely appreciated!


At least 5 point to your Smantec. (SRTSP64.SYS) Remove and replace with Microsoft security essentials.

Norton 360 How to uninstall

Download and run the Norton Removal Tool to uninstall your Norton product | Norton Support
http://www.microsoft.com/security_essentials/

Code:

Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\K\Desktop\Windows_NT6_BSOD_jcgriff2\050911-25459-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*C:\Symbols*http://msdl.microsoft.com/download/symbols;srv*e:\symbols
*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16695.amd64fre.win7_gdr.101026-1503
Machine Name:
Kernel base = 0xfffff800`02a58000 PsLoadedModuleList = 0xfffff800`02c95e50
Debug session time: Tue May 10 01:12:45.469 2011 (GMT-4)
System Uptime: 0 days 0:07:40.045
Loading Kernel Symbols
...............................................................
................................................................
.........................................
Loading User Symbols
Loading unloaded module list
.....
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 50, {fffff8a009953000, 1, fffff80002abf494, 0}

Unable to load image \SystemRoot\System32\Drivers\N360x64\0403000.005\SRTSP64.SYS, Win32 error 0n2
*** WARNING: Unable to verify timestamp for SRTSP64.SYS
*** ERROR: Module load completed but symbols could not be loaded for SRTSP64.SYS

Could not read faulting driver name
Probably caused by : SRTSP64.SYS ( SRTSP64+36fcc )

Followup: MachineOwner
---------

1: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

PAGE_FAULT_IN_NONPAGED_AREA (50)
Invalid system memory was referenced. This cannot be protected by try-except,
it must be protected by a Probe. Typically the address is just plain bad or it
is pointing at freed memory.
Arguments:
Arg1: fffff8a009953000, memory referenced.
Arg2: 0000000000000001, value 0 = read operation, 1 = write operation.
Arg3: fffff80002abf494, If non-zero, the instruction address which referenced the bad memory
address.
Arg4: 0000000000000000, (reserved)

Debugging Details:
------------------
Could not read faulting driver name

WRITE_ADDRESS: GetPointerFromAddress: unable to read from fffff80002d000e0
fffff8a009953000

FAULTING_IP:
nt!memmove+64
fffff800`02abf494 488901 mov qword ptr [rcx],rax

MM_INTERNAL_CODE: 0

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

BUGCHECK_STR: 0x50

PROCESS_NAME: wlanext.exe

CURRENT_IRQL: 0

TRAP_FRAME: fffff8800697f560 -- (.trap 0xfffff8800697f560)
NOTE: The trap frame does not contain all registers.
Some register v... Read more

http://www.sevenforums.com/bsod-help-support/162254-very-frequent-bsods.html
Relevancy 55.47%

Hey, I've got a windows 7 x64 system, not upgrade version. Hardware is about 4 years old, OS about 6 months. I use it as an HTPC and it's been giving me BSODs fairly frequently - like half of the days that it's in use. Perhaps it's a video problem that causes the BSODs? I updated video drivers recently but that didn't seem to help.

Also, it occasionally cuts out when streaming video from my NAS over SMB. Any ideas on how to go about debugging this problem?

Thanks,
tritium6

A:Frequent BSODs

Forget the SMB issue, I'm really mostly concerned over the BSODs. If someone can just tell me how to go about identifying the cause that would get me started. I'd rather not turn off auto-reboot after BSOD because that means I'll have to get up in the middle of a movie and my wife won't appreciate that. Is there some way to get the error code apart from writing it down from the blue screen itself?

Thanks a bunch.

http://www.sevenforums.com/bsod-help-support/146506-frequent-bsods.html
Relevancy 55.47%

I had an issue about a month ago (see link below) which this site helped me with. I didn't have any issues for 3 weeks but in the last few days I am having random and frequent BSODs.

Previous issue: BSOD after 15 minutes, DRIVER_IRQL

A MBAM sweep shows no issues. I have tried running a CHDSK but it does not appear to complete. I ran CCleaner but things seemed to get worse after this.

When a BSOD happens it does not re-boot but just freezes. There are no Minidump files being created even though my Write Debugging Information is set to "Small Memory Dump". I have attached a screen shot of my settings.

Any help would be appreciated.

Thanks,
Shawn

A:Frequent BSODs

For whatever reason, when another BSOD happened a few minutes ago a Minidump file was generated. I have attached it here.

http://www.sevenforums.com/bsod-help-support/337640-frequent-bsods.html
Relevancy 55.47%

Is Windows 7 . . .
- x86 (32-bit) or x64 ? x64
- the original installed OS on the system? yes
- an OEM or full retail version? OEM
- What is the age of system (hardware)? roughly a year and a quarter (purchased August 2010)
- What is the age of OS installation (have you re-installed the OS?) roughly a year and a quarter (same installation that it came with)

For the past few months I've been receiving a lot of BSOD crashes. They happen randomly as far as I've noticed; could be during a video, while playing a game, while typing a paper, etc. If any more information is needed just ask

A:Frequent BSODs

  
Quote: Originally Posted by mburke


Is Windows 7 . . .
- x86 (32-bit) or x64 ? x64
- the original installed OS on the system? yes
- an OEM or full retail version? OEM
- What is the age of system (hardware)? roughly a year and a quarter (purchased August 2010)
- What is the age of OS installation (have you re-installed the OS?) roughly a year and a quarter (same installation that it came with)

For the past few months I've been receiving a lot of BSOD crashes. They happen randomly as far as I've noticed; could be during a video, while playing a game, while typing a paper, etc. If any more information is needed just ask



Your .dmp file shows a stop error of 0x124 which is a general hardware error .

A "stop 0x124" is fundamentally different to many other types of bluescreens because it stems from a hardware complaint.

Stop 0x124 minidumps contain very little practical information, and it is therefore necessary to approach the problem as a case of hardware in an unknown state of distress.

Some generic advice.

If you are overclocking STOP. return to the default settings at least for now.
If you are running a RAID update its driver.
You can read more on this error and what to try here... Stop 0x124 - what it means and what to try

http://www.sevenforums.com/bsod-help-support/198168-frequent-bsods.html
Relevancy 55.47%

Hello,

I have recently started having regular BSOD's, and am unsure of the cause. Can anybody help? My computer has been working perfectly for the past 2 and a half years without fault, until around 2 weeks ago in recieving frequent BSOD's, and getting more frequent over time. I have followed the required posting methods, attaching the relevant files, and my system specs are below.
Windows 7 Ultimate
Voodoo 3dfx Graphics card
Asrock K7VM2 Motherboard
HEC-300VP-2RE 300W PSU.
Creative CT4670 sound card.

Thanks in advance for your help.

A:BSODs getting more frequent

Hi and Welcome to TSF!

Unfortunately, there are no minidumps in your attachments that we can analyse, this may be due to an assortment of factors, 3 possibilities from your software list are Ccleaner, Evidence Eliminator and possibly PC Tools Registry Mechanic. Please stop the first 2 from auto-running and uninstall the PC Tools software, it's more likely to break something than it is to fix anything.

I see mention of one recent BSOD, 0xD1_code_av_bad_ip_wdf01000, this points to a device driver as being a likely cause.

There is only 3GB free space on your E: drive (external backup drive?). As Acronis is running at startup, this may be a cause of problems.

You are running Bearshare at startup too, please disable or uninstall this software.

There's no sign of any antivirus software running, please install MSE and enable the built-in Windows firewall: Microsoft Security Essentials - Free Antivirus for Windows

http://www.techsupportforum.com/forums/f299/bsods-getting-more-frequent-671792.html
Relevancy 55.47%

This is a custom build computer (built last year) with an full retail installation of W7 Professional 64 bit with SP1 installed. The OS is the only one that has ever been installed on this PC. I had an issue late last year (http://www.sevenforums.com/crashes-d...dump-file.html and replaced the file as instructed. The computer is having issues again with many BSOD (almost daily when the PC is used).

Attached is the Windows_NT6_BSOD_jcgriff2 zip file as requested for BSOD analysis.

Appreciate any help!

Thanks,
Freddie

A:Frequent BSODs - W7 64-bit

  
Quote: Originally Posted by pongolo


This is a custom build computer (built last year) with an full retail installation of W7 Professional 64 bit with SP1 installed. The OS is the only one that has ever been installed on this PC. I had an issue late last year (http://www.sevenforums.com/crashes-d...dump-file.html and replaced the file as instructed. The computer is having issues again with many BSOD (almost daily when the PC is used).

Attached is the Windows_NT6_BSOD_jcgriff2 zip file as requested for BSOD analysis.

Appreciate any help!

Thanks,
Freddie


Hi Freddie.

First major problem is asacpi.sys

1-ASACPI.SYS a major cause of BSOD's in the 2005 rev.

The pre 2009 version of this driver is a known BSOD cause.

The 2005 version of this driver is a known BSOD cause.
Please visit this link: ASUS teK Computer Inc. -Support- Drivers and Download P7P55D LE
ASUSTeK Computer Inc. -Support- Drivers and Download P7P55D LE

Scroll down to the Utilities category, then scroll down to the "ATK0110 driver for WindowsXP/Vista/Windows 7 32&64-bit" (it's about the 12th item down).
Download and install it.
Go to C:\Windows\System32\drivers to check and make sure that the ASACPI.sys file is date stamped from 2009 or 2010 (NOT 2005).

Second problem that most of the Crashes point to is memory mangement.

Please run these two tests
Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program.

Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

Driver verifier






Quote:
I'd suggest that you first backup your stuff and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

In Windows 7 you can make a Startup Repair disk by going to Start....All Programs...Maintenance...Create a System Repair Disc - with Windows Vista you'll have to use your installation disk or the "Repair your computer" option at the top of the Safe Mode menu .

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to crash to the Blue Screen. Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).

If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.

http://www.sevenforums.com/bsod-help-support/179104-frequent-bsods-w7-64-bit.html
Relevancy 55.47%

Hello, I've been getting a lot of blue screening that happen whenever i do anything at all. Sometimes it will happen while the computer is booting up. I have attached the sf diagnostics tool rar. Please help.

A:Very frequent bsods, need help.

McAfee is a frequent cause of BSOD-s, consider uninstalling it with the McAfee Removal Tool and replace with Microsoft Security Essentials at least to test.How to uninstall or reinstall supported McAfee products using the Consumer Products Removal tool (MCPR)
McAfee Removal Tool - McAfee Uninstaller
Make scans with the following:

-Kaspersky TDSSKiller Anti-rootkit utility TDSSKiller
-ESET online scannerFree Online Virus Scanner | ESET

MSE is recommended from a strict BSOD perspective, compatibility & stability compared to other antiviruses/internet security software:- 1. Microsoft Security Essentials - Free Antivirus for Windows
2. Malwarebytes - Free
3.Good and Free system security combination.
Do not start the free trial of Malware Bytes; remember to deselect that option when prompted.

Run a full scan with both (separately) once downloaded, installed and updated.

Free up the start-up, nothing except the antivirus is usually needed.Startup Programs - Change
Troubleshoot Application Conflicts by Performing a Clean Startup

Run the System File Checker. It allows the user to scan for and restore corruptions in Windows system files.1. Click on the
2. Type CMD on Search
3. Left click and Run as Administrator
4. Type SFC /scannow
Full tutorial here:SFC /SCANNOW Command - System File Checker

Run Disk Check on your hard disk for file system errors and bad sectors on it:Disk Check
Post back results

http://www.sevenforums.com/bsod-help-support/267831-very-frequent-bsods-need-help.html
Relevancy 55.47%

Hi everyone and thank you in advance for all your help I've actually been getting quite a few problems with my laptop - mostly BSODs They occur at least once a day doing a variety of things so I can't really pinpoint the problem Most recently I've been trying to download some steam games and install directly onto my external HD - it seems pretty consistent then Also my laptop doesn't seem to be saving all the BSODs I get - I look at either the minidump folder or memory dmp frequently it doesn't record anything It's also set to not restart automatically BSODs Frequent I thought this would help Thank you very much again OS - Windows -bit Original - Windows OEM Version Laptop - years old OS - months Reinstalled on new ssd - Geforce GT M HD Graphics i - QM Power Supply - OEM - Alienware m x R EDIT Also sorry for the repost - posted it into the wrong section Since the posting I updated the Killer driver but still seeing problems within quot system security checks quot in perfmon

A:Frequent BSODs

Hi,

First of all, in regards to the perfmon report:


Quote:




Symptom: A service is reported as having an unexpected error code

Cause: One or more services has failed. The service did not stop gracefully, suggesting the service may have crashed or one of its components stopped in an unsupported way.

Details: Service exited with code not equal to 0 or 1077




If we go further~


Quote:




Display Name: Peer Networking Grouping
Exit Code: 1068
Service Name: p2psvc
Path: C:\Windows\System32\svchost.exe -k LocalServicePeerNet
Service Code: 0
Started: False
State: Stopped




Try deleting the file “idstore.sst” under the location: C:\windows\serviceProfiles\LocalService\AppData\Roaming\PeerNetworking.

You may need to show hidden files and folders to see this folder, etc: Control Panel > Folder Options > View 'show hidden files & folders' > Apply.

--------------------------------

Symptom: Device is disabled.

Cause: A device is disabled preventing it from working properly.

Details: The device, SonicWALL Virtual NIC, is disabled. If this device is no longer used it may be intentionally disabled. The Plug and Play ID for this device is 17.

Resolution:
1. Determine if you need the device.
2. If you need the device, enable it in Device Manager.
3. If you do not use the device it can be left disabled.

--------------------------------

Symptom: Device is not present, not working properly, or does not have all of its drivers installed.

Cause: A device has a configuration problem that prevents it from working properly.

Details: The device, Bigfoot Networks Bandwidth Control, is reporting "tv_ConfigMgrErr24". This device will not be available until the issue is resolved. The Plug and Play ID for this device is ROOT\LEGACY_BFLWF\0000.

Resolution:
1. Verify the correct driver is installed.
2. Try updating the drivers using Windows Update.
3. Check with the manufacturer for an updated driver.
4. Attempt to uninstall and then reinstall the device using Device Manager.

--------------------------------

Moving on to the DMP files, we have two bugchecks here:

SYSTEM_SERVICE_EXCEPTION (3b)


Quote:




An exception happened while executing a routine that transitions from non-privileged code to privileged code.

This bugcheck is generally related to a video driver issue.




and

KMODE_EXCEPTION_NOT_HANDLED (1e)


Quote:




This error typically indicates low disk space, a bug in a device driver or the system BIOS.




We have two different culprits being blamed in your DMP's:

dnelwf64.sys in the *3B which is the Citrix Deterministic Networks DNE Driver (Cisco VPM Client). Update if possible here - DNE Support - Deterministic Networks - Citrix

or remove the software using this driver if no update available for troubleshooting purposes.

In the *1E dump, the driver being faulted is Ak27x64.sys which is the
Killer Wireless-N 1100 Series LAN device driver. Check for an update if available here - Killer Gaming :: Support :: Driver Downloads

Regards,

Patrick

http://www.techsupportforum.com/forums/f299/frequent-bsods-702369.html
Relevancy 55.47%

Hi folks Am experiencing BSODs randomly First did an upgrade from Vista Home had Frequent BSODs the problem Did a clean install Still have the same error The computer Frequent BSODs has rebooted from a bugcheck The bugcheck was x f x xfffffa xfffff e xfffffa f f A dump was saved in C Windows MEMORY DMP Report Id - - OS Name Microsoft Windows Home Premium Version Build Other OS Description Not Available OS Manufacturer Microsoft Corporation System Name SCOTT-PC System Manufacturer HP-Pavilion System Model KJ AA-ABA m f System Type x -based PC Processor Intel R Core TM Quad CPU Q GHz Mhz Core s Logical Processor s BIOS Version Date American Megatrends Inc SMBIOS Version Windows Directory C Windows System Directory C Windows system Boot Device Device HarddiskVolume Locale United States Hardware Abstraction Layer Version quot quot User Name Scott-PC Scott Time Zone Eastern Standard Time Installed Physical Memory RAM GB Total Physical Memory GB Available Physical Memory GB Total Virtual Memory GB Available Virtual Memory GB Page File Space GB Page File C pagefile sys Dump files can be located here http cid-d cc a b skydrive live com browse aspx Public Let me know if anything else is needed to help diagnose Appreciate the help greatly nbsp

A:Frequent BSODs

It's a Power State STOP error usually associated with external hardware such as wireless adapters or firewire drives, on return from sleep or hibernate. Some installed firewalls or antivirus applications can exacerbate it.

http://social.technet.microsoft.com/Search/en-US/?Refinement=4&Query=DRIVER_POWER_STATE_FAILURE

The Vista issues should have been fixed by now, but I have seen it occur on Win7 with firewire drives.

But let me have a gander at the minidump.

1 > create a new folder on the desktop and call it "dumpcheck" or whatever you like
2 > navigate to c:\windows\minidump and copy the last few minidump files to that folder. *this assumes 'c' is your boot drive, if it is not, subsitute accordingly
3 > close the folder and right click on it and select Send to Compressed (zipped) Folder.
4 > use the "manage attachments" in the "advanced" reply window to upload that zip file here as an attachment.
If you do not see any minidumps, be sure you are not using any cache cleaner such as CCleaner. Also run sysdm.cpl and select Advanced > Startup and Recovery. Make sure "small memory dump" is the one chosen under "write debugging information" and the location should be %systemroot%\minidump
 

https://forums.techguy.org/threads/frequent-bsods.890289/
Relevancy 55.47%

Code:
? OS - Windows 8.1 Latest Update
? x64
? W8
? Retail
? 1yr
? Less than a week
? i7 3770k
? GTX660
? asus p8z77-v lk
? Corsair 600W
Never had issues with the system until recently. Now it BSODs frequently and some times it will power on but nothing will display. Ran memtest86+ for 24 hrs and no issues, also ran Prime 95 without problems. SSD looks like it's in good health too.

FurMark GPU stress test also didnt reveal any crashing.

I'm thinking it's the motherboard but I just wanted to be sure.

Tried to run perfmon /report but got error "Error occured while attempting to generate the report. The operator or administrator has refused the request". Tried running as admin same results, did use Win + X

BSOD File collection thing: SF_05-05-2014

Other BSOD tool: SF_05-05-2014

Gonna run driver verifier now.

A:Frequent BSODs W8.1

Hi,

We have two bug checks:

*Be 100% sure your SSD firmware is up to date*

KERNEL_SECURITY_CHECK_FAILURE (139)

This bug check indicates that the kernel has detected the corruption of a critical data structure.

BugCheck 139, {3, ffffd000e97374c0, ffffd000e9737418, 0}

The 1st parameter of the bugcheck is 3 which indicates that a LIST_ENTRY was corrupted. Code 3, LIST_ENTRY corruption. This type of bug check can be difficult to track down and indicates that an inconsistency has been introduced into a doubly-linked list (detected when an individual list entry element is added to or removed from the list).

DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)

This indicates that a kernel-mode driver attempted to access pageable memory at a process IRQL that was too high.

A driver tried to access an address that is pageable (or that is completely invalid) while the IRQL was too high. This bug check is usually caused by drivers that have used improper addresses.


Code:

1: kd> k
Child-SP RetAddr Call Site
ffffd001`d73296a8 fffff800`5dd70ae9 nt!KeBugCheckEx
ffffd001`d73296b0 fffff800`5dd6f33a nt!KiBugCheckDispatch+0x69
ffffd001`d73297f0 fffff800`31ea7806 nt!KiPageFault+0x23a
ffffd001`d7329980 fffff800`31ea73c2 dxgmms1!VidSchiProcessIsrCompletedPacket+0x156
ffffd001`d7329a70 fffff800`31ea722a dxgmms1!VidSchDdiNotifyInterruptWorker+0x162
ffffd001`d7329ad0 fffff800`31c68a9e dxgmms1!VidSchDdiNotifyInterrupt+0x7a
ffffd001`d7329b00 fffff800`3237876a dxgkrnl!DxgNotifyInterruptCB+0x6e
ffffd001`d7329b30 ffffd001`d7329d30 nvlddmkm+0xc776a
ffffd001`d7329b38 00000000`00000000 0xffffd001`d7329d30
nvlddmkm.sys is the nVidia video driver, and afterwards we have a few DirectX Kernel/MMS.

------------------

1. Please uninstall all Asus bloatware, for example I see AsIO.sys which is Asus PC Probe/AI Suite.

2. Ensure you have the latest video card drivers. If you are already on the latest video card drivers, uninstall and install a version or a few versions behind the latest to ensure it's not a latest driver only issue. If you have already experimented with the latest video card driver and many previous versions, please give the beta driver for your card a try.

Regards,

Patrick

http://www.techsupportforum.com/forums/f299/frequent-bsods-w8-1-a-833506.html
Relevancy 55.47%

I keep getting bsods on a fresh install of windows 7 professional x64 and have no idea why.

I'm attaching 3 dump files, first bsod happened while watching a movie and I didn't get to see anything before it restarted, the other 2 bsods happened while I was trying to install the symbols for the debugger and said something about fileinfo.sys
I had a few bsods yesterday as well but I'm quite sure those were from an incompatible wireless dongle which I removed, if needed I can attach the old bsods as well.
 

https://forums.techguy.org/threads/frequent-bsods.908951/
Relevancy 55.47%

Hi guys. I did as this post asks and here goes my files. I also attached the error description that shows up when the system, recovers. Hope it helps.

My extra info:
My Win 7 is x64
It is the original installed OS on the system
It is an OEM
- What is the age of system (hardware)? - Less than a year. Computer bought on june/2010.
- What is the age of OS installation (have you re-installed the OS?) No, I haven't.

Thanks for all

A:Bsods becoming frequent

  
Quote: Originally Posted by tashie


Hi guys. I did as this post asks and here goes my files. I also attached the error description that shows up when the system, recovers. Hope it helps.

My extra info:
My Win 7 is x64
It is the original installed OS on the system
It is an OEM
- What is the age of system (hardware)? - Less than a year. Computer bought on june/2010.
- What is the age of OS installation (have you re-installed the OS?) No, I haven't.

Thanks for all


These both contain little useful info but I do notice you are running sptd.sys. That is a huge cause of BSODs. They both were caused by memory corruption probably from a driver possibly sptd.sys
Please remove any CD virtualization programs such as Daemon Tools and Alcohol 120%.

They use a driver, found in your dmp,sptd.sys, that is notorious for causing BSODs.

Use this SPTD uninstaller DuplexSecure - Downloads

when you're done you can use this Freeware MagicISO Virtual CD/DVD-ROM(MagicDisc) in its place.
I would also run a system file check to verify and repair your system files.

Run a system file check to verify and repair your system files.
To do this type cmd in search, then right click to run as administrator, then
SFC /SCANNOW

Read here for more information SFC /SCANNOW Command - System File Checker

Let us know the results from the report at the end.

Old drivers needing update

Code:
pcouffin.sys 12/5/2006 10:39:30 AM fffff880`04110000 fffff880`04124380 0x00014380 0x457584a2
lmimirr.sys 4/10/2007 06:32:45 PM fffff880`0f211000 fffff880`0f218000 0x00007000 0x461c108d
snp325.sys 7/23/2007 10:22:27 PM fffff880`0589a000 fffff880`062d2f80 0x00a38f80 0x46a56263
LMIRfsDriver.sys 7/14/2008 12:26:56 PM fffff880`05881000 fffff880`05894000 0x00013000 0x487b7e50
RTL8187B.sys 3/24/2009 03:04:13 AM fffff880`03670000 fffff880`036df000 0x0006f000 0x49c885ed
spldr.sys 5/11/2009 12:56:27 PM fffff880`01b83000 fffff880`01b8b000 0x00008000 0x4a0858bb
RTKVHD64.sys 6/16/2009 06:12:51 AM fffff880`04e21000 fffff880`04fd1e80 0x001b0e80 0x4a377023
How To Find Drivers:




Quote:
- search Google for the name of the driver
- compare the Google results with what's installed on your system to figure out which device/program it belongs to
- visit the web site of the manufacturer of the hardware/program to get the latest drivers (DON'T use Windows Update or the Update driver function of Device Manager).
- if there are difficulties in locating them, post back with questions and someone will try and help you locate the appropriate program.


- - The most common drivers are listed on this page: Driver Reference http://www.carrona.org/dvrref.html
- - Driver manufacturer links are on this page: http://www.carrona.org/drvrdown.html

Code:

Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\K\Desktop\Windows_NT6_BSOD_jcgriff2\040911-19500-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*C:\Symbols*http://msdl.microsoft.com/download/symbols;srv*e:\symbols
*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (2 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.17514.amd64fre.win7sp1_rtm.101119-1850
Machine Name:
Kernel base = 0xfffff800`03a03000 PsLoadedModuleList = 0xfffff800`03c48e90
Debug session time: Sat Apr 9 20:38:03.693 2011 (GMT-4)
System Uptime: 0 days 22:54:46.238
Loading Kernel Symbols
...............................................................
......................................... Read more

http://www.sevenforums.com/bsod-help-support/157686-bsods-becoming-frequent.html
Relevancy 55.47%

In the last months I have been experiencing many BSODs, with no particular pattern. Sometimes, the BSOD happens when I have left the computer alone for some minutes. Others, the system crashes when I am using it, primarily for work.

Here I attach my diagnostic file. Thank you for your support.

A:Frequent BSODs

Your Dell latitude d630 bios version A07 dated back 1/30/2008. The latest BIOS version is A17.
Driver Details | Dell US
Please update your BIOS first.

http://www.eightforums.com/bsod-crashes-debugging/34379-frequent-bsods.html
Relevancy 55.47%

My computer has been experiencing BSODs on a regular basis ever since I bought it. However, I feel that the frequency has gone up seriously when I installed driver updates a couple months ago. At this point, I'm getting BSODs almost every single day.
 
http://www.mediafire.com/?9gb2fxps9hyd9
 
I have taken some pictures of the BSOD screens, and as you can see, the crash dump file is never created. I have manually checked the minidump folder and it is also empty.
 

A:Frequent BSODs

Hello,If we could gather a little more information about the problem computer, it might prove helpful in pointing toward a solution.1. )  Please follow this link:  BSOD Posting Instructions Windows 8 - Windows 7 - Vista.Follow all instructions with the exception of:Create a new thread HERE and attach the file(s) after step 4Note: Both files, autoruns and JCGriff2 BSOD collection app, of Step 1 need to be in the Documents folder.Next, Upload the zipped folder to a File Sharing website of your choosing because Bleeping Computer has a 512 K only upload limit and this file will be much larger.   For a listing of free File Sharing websites see: http://technojourney.com/trending/best-alternatives-megaupload-and-filesonic-file-hosting/or you may use File Dropper or Box.com.Please post a link to the file in your next post.2. )  To help us get a better look at your computer's hardware, please download and install Speccy by Piriform. (mirror site)Run Speccy and from the top menu, select File --> Publish Snapshot.  Click "Yes" to proceed.Click, Copy to Clipboard and  paste this address into your next post.3. )  Please download MiniToolBox by Farbar, save it to your Desktop, then run it.Check the following checkbox:List Installed ProgramsThen click Go.Highlight the contents of  Result.txt.  Copy (Ctrl + C), then Paste (Ctrl + V)  the contents of this file into your next post.  

http://www.bleepingcomputer.com/forums/t/486474/frequent-bsods/
Relevancy 55.47%

Hello
I just got BSOD by writing this thread and now Im rewriting it lol.
Anyways, lately I've been getting alot of BSODs on Windows 7 Ultimate 64 bit. I don't need to play game or anything, BSOD just happens randomly in my opinion.
I have dual boot system with Win Xp and Win 7. I have reinstalled Win 7 like 3-5 already and tried both 32 and 64 bit versions. Both giving BSODs. I've ran Memtest86+ with 2 RAM sticks and individually for about 3-5 passes. I have also updated drivers ( VGA, Network, Sound, Chipset etc.)

Any help would be appreciated.

EXTRA INFORMATION: Later dumps should be created with Driver Verifier running and Complete Memory Dump enabled. Older ones are just Small Memory Dumps without Verifier.
Added new Dump file.

A:Frequent BSODs Win 7 x64

Related to Rt64win7.sys 8101E/8168/8169 NDIS 6.20 64-bit Driver from Realtek Corporation. I would re-install newest driver available.

http://www.sevenforums.com/bsod-help-support/222957-frequent-bsods-win-7-x64.html
Relevancy 55.47%

- Win Ultimate bit - the original OS was Win Home bit - Full Retail - System is about years old but I upgraded the BSODs frequent Very PSU and Graphics card a year ago months ago HP replaced the motherboard - I installed Win Ultimate a few months ago A bit about my computer specs Win Ultimate x Nvidia GTS w PSU AMD Athlon II quad-core processor Time stamps may be incorrect Ever sense I got my computer back from HP the time clock never stayed right I tested the CMOS battery and it appears to be brand new and installed correctly I had to run the Windows NT BSOD application in safe mode if that matters I'm posting this from my brothers PC because mine fails to say on for mins There is nothing I am really doing that BSOD will appear I can turn my computer on and let it idle and it wall BSOD I have managed to copy down the following Very frequent BSODs error codes x - ntsf sys x e - eamonm sys x - BAD POOL HEADER x B Very frequent BSODs - SYSTEM SERVICE EXCEPTION Thank you for your help

A:Very frequent BSODs

These crashes were caused by memory corruption/exception (Cx05) probably a driver.
Please run these two tests to verify your memory and find which driver is causing the problem.

* If you are overclocking anything reset to default before running these tests.
In other words STOP!!!

* If you have Raid update its Driver.

Memtest.





Quote:
*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

*Boot from the CD, and leave it running for at least 5-7 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

Any errors are indicative of a memory problem.

If a known good stick fails in a motherboard slot it is probably the slot.



RAM - Test with Memtest86+

Driver verifier






Quote:
Using Driver Verifier is an iffy proposition. Most times it'll crash and it'll tell you what the driver is. But sometimes it'll crash and won't tell you the driver. Other times it'll crash before you can log in to Windows. If you can't get to Safe Mode, then you'll have to resort to offline editing of the registry to disable Driver Verifier.

So, I'd suggest that you first backup your stuff and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Special Pool", "Force Pending I/O Requests" and "Low Resource Simulation" and click "Next"
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to crash to the Blue Screen.
Continue to use your system normally, and if you know what causes the crash, do that repeatedly.
The objective here is to get the system to crash because Driver Verifier is stressing the drivers out.
If it doesn't crash for you, then let it run for at least 36 hours of continuous operation.

Reboot into Windows (after the crash) and turn off Driver Verifier by going back in and selecting "Delete existing settings" on the first page, then locate and zip up the memory dump file and upload it with your next post.

If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.

http://www.sevenforums.com/bsod-help-support/223739-very-frequent-bsods.html
Relevancy 55.47%

hello all
i had updated my amd gpu driver had frequent BSODs after which i got the new one recommended by Toshiba and used display drive uninstaller and installed the new one.
i still get frequent bsods but...
these are the things ive tried
-ran win memory checker...sometimes it says there a hardware probs other times no
-ran memtest, shows no errors
-many forum recommend updating windows, but i get the 80070002 error..for this
-tried system update readiness tool, no use
-tried microsoft fixit no use
-have run sfc /scannow and chkdsk...sfc said they fixed some errors others they cannot

im attaching the req. stuff for bsod posting as well as the CBS.log from sfc

A:Getting frequent BSODs..tried everything

First; can you upload those files with a zipping program rather than the one you did it with? it will be easier to open that way. And actually; from what it looks like; it seem to me that at this point I would be looking at a complete clean install of windows. So with that said; I would make sure you have done a complete backup of anything important; and see my link in my signature that says "clean install windows 7"

http://www.sevenforums.com/bsod-help-support/317340-getting-frequent-bsods-tried-everything.html
Relevancy 55.47%

Installed OS is Windows Professional please Frequent BSODs, help. bit First OS installed was a bit windows ultimate have since reformatted to windows ultimate bit and windows professional bit OS installed is retail Hardware age is year for everything Age of OS installation is month CPU AMD Phenom II X ghz GPU XFX RADEON HD XT GB Mobo ASUS Frequent BSODs, please help. M A TD PRO PSU Frequent BSODs, please help. CORSAIR VX W ATX V I am unsure what you mean by system manufacturer and model number I built this pc myself The BSODs come in series when they first happen they will happen again after each boot up a few times It mainly happens when I watch video streams or play video games Now and then the PC refuses to boot after a BSOD and a few times the PC has flat out BSODed after a boot idle in windows I have attached an image showing SpeedFan I read an old guide somewhere that the voltage numbers shouldn't vary too much but I don't know what to make of it Disregard the red lines I made those myself

A:Frequent BSODs, please help.

I'm not entirely confident on voltage readings myself, but I always hear anything above 10% difference is gonna be bad, and some of these are way beyond that (like the +5V). You may wanna look at getting a replacement PSU, lad. Corsair PSU's aren't bad at all, but there's always the chance of getting one that didn't pull through well during manufacturing. The rampant nature of the crashes also display hardware problems, especially since not only do many of them display memory corruption as the cause, but also that some of the crashdumps themselves have been corrupted.

If you feel like forgoing that for now, you wanna do some hardware tests. Try some of these:

CPU: Prime95 (Torture Test; Large FFTs, 9+ hours)
Memory: Memtest86+ (~7 passes)
GPU: MemtestG80/CL

Note that if it does have to do with the PSU, errors should pop up in multiple hardware tests. CPU also will affect Memory test (though not sure GPU).

http://www.techsupportforum.com/forums/f299/frequent-bsods-please-help-572929.html