Windows Support Forum

Windows 7 BSOD started after a faulty wire but

Q: Windows 7 BSOD started after a faulty wire but

Hello all Does anyone know what this following error code means I m guessing it s some kind of hardware failure but I BSOD but faulty wire started 7 a Windows after can t figure out what I bought a new western digital caviar black TB hard drive installed it with Sata cables and installed Windows ultimate on it and it worked fine for a couple of days All of a sudden today I get this error I should mention that the reason why I decided Windows 7 BSOD started after a faulty wire but to replace the hard drive is because my other hard drive s were fine until one of their sata cable broke in half and even tho I replaced the Windows 7 BSOD started after a faulty wire but sata cables on those drives they still won t boot and would cause BSOD s So I decided to buy a new drive and new cables and try it So could someone please help me I m so confused and don t know what to do here Thanks so much Technical information Stop x x xFFFFFA B E X B X F nbsp

Relevancy 100%
Preferred Solution: Windows 7 BSOD started after a faulty wire but

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Windows 7 BSOD started after a faulty wire but

"were fine until one of their sata cable broke in half"...
Was this on the SATA cable or with the SATA connector on the motherboard. Was the power on when it broke?

http://www.techspot.com/community/topics/windows-7-bsod-started-after-a-faulty-wire-but.179858/
Relevancy 66.22%

Hello,
I unplugged all of my wires to unmix them. Then I plugged all of them, the HDD started with a LED who blinked one time and 5 seconds after it blinks again.
I saw that I put the wrong wire (I put the wire of my laptop), then I put the right wire, and the LED started blinking without stopping.
Just because of putting a damn wrong wire, my HDD got blocked.
Is it possible to fix it?
I just want to know if my HDD isn't dead.
Thanks
 

Relevancy 61.92%

I believe drivers? faulty BSOD 116 card or graphics faulty the initial crash was caused by overheating Based on the fact that I have gotten it to work for a short amount of time more on that later Booting up with the drivers for my graphics card enabled causes BSOD to appear but when it is disabled everything is fine I can boot into safe mode and I have already reinstalled windows My motherboard is Asus B M-e and my graphics card is Nvidia EV A GTX How I got it to work for a short amount of time I reinstalled windows and then installed my integrated Ethernet driver After that was out of the way I installed and used driver booster to install the rest of my drivers I then noticed there was a missing driver that the program could not install that was named Simple PCI Controller So I thought I should install that driver using my motherboard's driver installation disk It then worked up until I decided to change the settings in Nvidia Control panel I also do not know how faulty graphics cards behave so it might be my graphics card The game I was playing when this started was Life is Strange if that is needed

A:BSOD 116 faulty graphics card or faulty drivers?

Sorry thought I uploaded this but apparently not.

http://www.sevenforums.com/bsod-help-support/398657-bsod-116-faulty-graphics-card-faulty-drivers.html
Relevancy 57.19%

Hi.

I have a computer that randomly crashes during the day.
Minidumps refer to ntoskrnl.exe.
I've read a few of the threads here related to ntoskrnl, but I'm not getting any wiser.

Tried a full reinstall of Windows 7 Pro 64-bit, but that didn't seem to help either

I recently changed the RAM from one single 2GB-chip to Two 2GB-chips. Could it be the chips?

Spike

Attachment 287342

A:Random BSOD: Faulty RAM, or just borked windows?

Code:
On Wed 25/09/2013 11:39:22 AM GMT your computer crashed
crash dump file: E:\BSOD\092513-34101-01.dmp
uptime: 22:30:29
This was probably caused by the following module: ntkrnlmp.exe (nt!KeBugCheckEx+0x0)
Bugcheck code: 0xA (0xFFFFFB8007871E08, 0x2, 0x1, 0xFFFFF80002ADF971)
Error: IRQL_NOT_LESS_OR_EQUAL
Please use MemTest86+ to check for memory errors. Run a minimum of 8 passes or until you receive an error.

RAM - Test with Memtest86+

http://www.sevenforums.com/bsod-help-support/306237-random-bsod-faulty-ram-just-borked-windows.html
Relevancy 55.9%

Hi there as of a driver OS Repairing BSOD's Windows files after corrupted faulty stupid Repairing Windows after faulty driver BSOD's corrupted OS files faulty LAN-driver by Intel Sony I got horrible problems with BSOD's and graphics failures and due to my stupid unsystematic approach it took me a while to fix it Simply Installing Repairing Windows after faulty driver BSOD's corrupted OS files newest ethernet drivers after I found out they were responsible As of now my system Win Pro x is a total wreck can't open either my explorer or my substitute program Directory Repairing Windows after faulty driver BSOD's corrupted OS files Opus opening the context menu crashes the explorer exe and often I just can't left- click on something Problems uninstalling and installing stuff also Now how do I again start amp proceed with the Windows repair without losing any data or having to reformat The awful European Sony support was no help at any time If you're curious to further investigate into my issue I attach you the log file that quot sfc scannow quot download here MB brought as well as the log file of my failed installation try of avast virusscan No I don't have a virus malware checked for that at least Funny enough in safe mode everything works this is also where I installed avast then Should I run any other scans in your opinion I think I'd just should repair it Thanks in advance Kind regards PS I hope assume you don't consider this issue for the BSOD forum as I already fixed it But of course you're free to move it

A:Repairing Windows after faulty driver BSOD's corrupted OS files

Please upload the new .dmp files, so we can see what is going on...

http://www.sevenforums.com/bsod-help-support/141767-repairing-windows-after-faulty-driver-bsods-corrupted-os-files.html
Relevancy 54.18%

Hi All This is my first post and I was unable to get the screenshots but I did managed to mini dump files for the affected machine One of our user has been getting BSOD recently and it starts exactly after using Skype To my surprise they (after Windows 7 Skype) started using BSOD have been using Skype for many months without any issues So I am not sure whether it is related ti Skype or Windows 7 BSOD (after started using Skype) something else Here are few specs for laptop which may help you assisting the issue and error messages as below OS Windows Pro BIT Laptop Type Dell Latitude E Here is the error message we are getting as below Problem signature Problem Event Name BlueScreen OS Version Locale ID Additional information about the problem BCCode c BCP FFFFF E BC BCP BCP BCP FFFFF FA OS Version Service Pack a Product Please note I have also attached the mini dump for the last few weeks Can someone please help us here Kind Regards Bemine

A:Windows 7 BSOD (after started using Skype)

Crashes are being caused by the ShrewSoft VPN Adapter IM Filter Driver. Recommend removing the software completely from the system and then re-installing it fresh with either a fresh download or from the installation media supplied.
If that does not work, have the user uninstall the Symantec security software with a Symantec removal tool; contact Symantec for the appropriate steps for removing the software completely. Then download a fresh copy of the Symantec security software and install it fresh.
I suspect either the VPN software or the Symantec software is corrupted and interfering with the system.

http://www.sevenforums.com/bsod-help-support/235572-windows-7-bsod-after-started-using-skype.html
Relevancy 54.18%

Hope I am doing this right! I have included the zip file from SF DeBug.Attachment 308426

A:BSOD started after reinstall of Windows

Code:
fffff880`0544bca8 fffff880`05d5bf25Unable to load image \SystemRoot\system32\drivers\mfeapfk.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for mfeapfk.sys
*** ERROR: Module load completed but symbols could not be loaded for mfeapfk.sys
mfeapfk+0x5f25

Code:
fffff880`0544bc88 fffff880`022bf657Unable to load image \SystemRoot\system32\drivers\mfehidk.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for mfehidk.sys
*** ERROR: Module load completed but symbols could not be loaded for mfehidk.sys
mfehidk+0x6c657

Code:
fffff880`0544bc28 fffff880`02552bc0Unable to load image \SystemRoot\system32\DRIVERS\mfencbdc.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for mfencbdc.sys
*** ERROR: Module load completed but symbols could not be loaded for mfencbdc.sys
mfencbdc+0x53bc0
Uninstall McAfee Using McAfee Removal Tool. Use Microsoft Security Essentials as your antivirus with windows inbuilt firewall, and free MBAM as the on demand scanner.

Download, install and update those, and then run full system scans with both of them, one by one.

Let us know the results.

http://www.sevenforums.com/bsod-help-support/323691-bsod-started-after-reinstall-windows.html
Relevancy 53.75%

I've got a Toshiba Satellite p w-b laptop running Windows that has out of the blue started crashing with a BSOD SYSTEM SERVICE EXCEPTION For a while it wouldn't even boot it would crash before fully booting and I suspected a virus infection so I downloaded the BitDefender Rescue CD Somehow through a train of crashes it more can't 10 boot started BSOD, Windows Suddenly any booted into Windows instead of the LiveCD and actually stayed running However the keyboard and touchpad wouldn't work Device Manager showed that there was a driver problem with the keyboard I tried telling Windows Update to find a new driver for it but it claims that it was up to date Downloaded MBAM and ran it which found PUP but nothing serious I told it to quarantine them just in case I then ran sfc exe scannow which ran all the way through and completed with no errors Finally I made a system image with Macrium Reflect so that if it won't boot again at least the files on the HDD will be saved Then I uninstalled the keyboard driver and shut down In the meantime Windows Update installed the updates that were released yesterday Now I tried to restart it and it's just crashing with a BSOD again before it will finish booting I tried booting a Windows DVD and running the Repair but it BSOD again while trying to do that Does anyone have any suggestions At first I thought it was a virus software driver problem but if it can't even boot from a DVD I don't know what to say I'm attempting to retrieve the Windows 10 Suddenly started BSOD, can't boot any more BSOD minidump from the backup right now I'll post it if I can find it Edit Moved topic from Windows to the more appropriate forum Animal

A:Windows 10 Suddenly started BSOD, can't boot any more

Start with these free bootable diagnostics: 
Most laptops w/UEFI won't even show a CD/DVD at boot time unless it's UEFI compatible (try MemTest86 from here:  http://www.memtest86.com/download.htm ).  NOTE:  MemTest86 is UEFI compliant, MemTest86+ is not)
 
With newer laptops (UEFI) you may have to fiddle with the settings in the BIOS (Secure Boot and CSM/legacy mode) in order to run the HDD diags
MemTest 86 (not 86+) will boot to UEFI automatically
The antivirus tests will vary based upon the methods used (but I'm not as concerned with these as you were able to do some scans previously).
 
Minidumps are located in C:\Windows\Minidump
They'll have a date/time for the filename - and will end in .dmp
 
Can you get into Safe Mode?
If you can reach the Startup Repair screen, you can use the Troubleshoot option to find the Safe Mode entry.
See if you can do that.

If you're able to get into Safe Mode, then try a "clean" boot:  http://www.thewindowsclub.com/what-is-clean-boot-state-in-windows

http://www.bleepingcomputer.com/forums/t/613697/windows-10-suddenly-started-bsod-cant-boot-any-more/
Relevancy 53.75%

Hello everyone.
My computer started having random BSOD's a week ago (one happened and then downhill from that) but I removed 2 RAM dim's (I have 4 in total) and it apparently stopped for some days. Just 10 minutes ago, another one happened.
Heres my setup:
i5 750 @ 3.2Ghz
2x4gb GSKILL Ripjaws (removed 2x2gb)
Asus P7P55D-PRO
Asus GTX650 TC

Cpu is a bit clocked but it has been for quite some time now and never gave me problems so it can be considered stable.
I had a lot of different BSOD's as you can see, being the latest "NON_FAULT_IN_PAGED_AREA". I hope you can help me solving this situation since I've looked and many people have been experiencing this same thing lately.

Thank you in advance!

(update: ran Error-Checking in C: with both boxes selected and nothing came up. Same with Memtest which ran for almost an hour and 100% pass with 0 errors)

A:Computer started having BSOD's (Windows Ultimate x64)

Code:
Host Name: HUGO-PC
OS Name: Microsoft Windows 7 Ultimate
OS Version: 6.1.7601 Service Pack 1 Build 7601
OS Manufacturer: Microsoft Corporation
OS Configuration: Standalone Workstation
OS Build Type: Multiprocessor Free
Registered Owner: Hugo
Registered Organization:
Product ID: 00426-OEM-8992662-00006
Original Install Date: 16-05-2013, 22:41:47
System Boot Time: 30-07-2013, 00:45:09
System Manufacturer: System manufacturer
System Model: System Product Name
System Type: x64-based PC
Where'd you get your copy of Win7 and how was it activated?

http://www.sevenforums.com/bsod-help-support/299155-computer-started-having-bsods-windows-ultimate-x64.html
Relevancy 53.32%

My windows 7 Home Premium has recently started to do the BSOD when I open Windows Live Mail. (Used to work fine). I then decided to install and use MS Outlook instead but that did the same thing.
Has anyone else had this experience and found a fix??.
Attached is the system info and reports recommended by this site.

A:[SOLVED] BSOD when Windows Live Mail Started in Win 7

Hi,

Cause is obvious - PC Tools (pctNdis-PacketFilter.sys) + AVG + Threatfire.

Remove PC Tools and Threatfire with Revo Uninstaller - http://www.revouninstaller.com/revo_..._download.html

Then remove AVG as follows:

Quote:




Download the AVG Removal Tool (ART) from here (make sure you get the appropriate version) -> save to desktop.

Boot into SAFEMODE - NO Networking. Then follow instructions to remove.

When complete - re-boot.

Install MS Security Essentials --> http://www.microsoft.com/Security_Essentials/

Then reset the Windows Firewall to its default settings -
START -> type cmd.exe -> right-click -> run as administrator -> type netsh advfirewall reset press enter




Then you should be BSOD free!

Regards,
Reventon

BUGCHECK SUMMARY

Code:

Built by: 7600.16617.x86fre.win7_gdr.100618-1621
Debug session time: Tue Nov 16 15:02:06.380 2010 (GMT+13)
System Uptime: 0 days 4:01:56.348
BugCheck D1, {c9bd6000, 2, 0, a56801b7}
*** WARNING: Unable to verify timestamp for pctNdis-PacketFilter.sys
*** ERROR: Module load completed but symbols could not be loaded for pctNdis-PacketFilter.sys
*** WARNING: Unable to verify timestamp for pctNdis.sys
*** ERROR: Module load completed but symbols could not be loaded for pctNdis.sys
*** WARNING: Unable to verify timestamp for avgfwd6x.sys
*** ERROR: Module load completed but symbols could not be loaded for avgfwd6x.sys
*** WARNING: Unable to verify timestamp for avgtdix.sys
*** ERROR: Module load completed but symbols could not be loaded for avgtdix.sys
Probably caused by : pctNdis-PacketFilter.sys ( pctNdis_PacketFilter+a1b7 )
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0xD1
PROCESS_NAME: svchost.exe
Bugcheck code 000000D1
Arguments c9bd6000 00000002 00000000 a56801b7
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7600.16617.x86fre.win7_gdr.100618-1621
Debug session time: Tue Nov 16 00:34:28.465 2010 (GMT+13)
System Uptime: 1 days 6:11:49.824
BugCheck D1, {e8d03000, 2, 0, a0fb61b7}
*** WARNING: Unable to verify timestamp for pctNdis-PacketFilter.sys
*** ERROR: Module load completed but symbols could not be loaded for pctNdis-PacketFilter.sys
*** WARNING: Unable to verify timestamp for pctNdis.sys
*** ERROR: Module load completed but symbols could not be loaded for pctNdis.sys
*** WARNING: Unable to verify timestamp for pctgntdi.sys
*** ERROR: Module load completed but symbols could not be loaded for pctgntdi.sys
*** WARNING: Unable to verify timestamp for TfNetMon.sys
*** ERROR: Module load completed but symbols could not be loaded for TfNetMon.sys
Probably caused by : pctNdis-PacketFilter.sys ( pctNdis_PacketFilter+a1b7 )
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0xD1
PROCESS_NAME: pctsSvc.exe
Bugcheck code 000000D1
Arguments e8d03000 00000002 00000000 a0fb61b7
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7600.16617.x86fre.win7_gdr.100618-1621
Debug session time: Sun Nov 14 12:42:46.409 2010 (GMT+13)
System Uptime: 0 days 16:49:39.393
BugCheck D1, {c77b7000, 2, 0, a43b51b7}
*** WARNING: Unable to verify timestamp for pctNdis-PacketFilter.sys
*** ERROR: Module load completed but symbols could not be loaded for pctNdis-PacketFilter.sys
*** WARNING: Unable to verify timestamp for pctNdis.sys
*** ERROR: Module load completed but symbols could not be loaded for pctNdis.sys
*** WARNING: Unable to verify timestamp for pctgntdi.sys
*** ERROR: Module load completed but symbols could not be loaded for pctgntdi.sys
*** WARNING: Unable to verify timestamp for TfNetMon.sys
*** ERROR: Module load completed but symbols could not be loaded for TfNetMon.sys
Probably caused by : pctNdis-PacketFilter.sys ( pctNdis_PacketFilter+a1b7 )
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0xD1
PROCESS_NAME: pctsSvc.exe
Bugcheck code 000000D1... Read more

http://www.techsupportforum.com/forums/f299/solved-bsod-when-windows-live-mail-started-in-win-7-a-528933.html
Relevancy 53.32%

Hello guys,

I have very good brand re-installed machine but too often when it is in idle or I have opened 2-3 browser windows or installing or removing some program there is BSOD.
Even when i play not so heavy games like Diablo 3 there is BSOD. I had this issue before reinstalling the Windows.

I am using Windows Pro 64 bit with 16 GB of RAM and brand new Video card.

Could you please tell me what is causing this issue. I am attaching all minidump files.

Thank you!

A:BSOD when started 2 or 3 browser windows or playing games

Welcome
Potentially a memoryproblem, lets find out for sure
Run for 8 passes.
Then test each stick in a good slot for 6 passes.
If you have dual channel, the results may be incorrect, if shows pass.
Guide to using Memtest86+ - Geeks to Go Forums

http://www.sevenforums.com/bsod-help-support/248523-bsod-when-started-2-3-browser-windows-playing-games.html
Relevancy 51.17%

What topic says.
Today while i was surfing the net,suddenly BSOD and it was 0x00007 or something and after i went into windows again,i couldn't connect to internet,after 1 hour of trying,i gave up,and i changed my wire and it worked..
And i checked the minidump file it says its the http.sys,
So does BSOD damage your internet wire?or my wire was damaged and it caused the bsod?
Thanks.

Btw my BSOD problem is not solved yet =/,gotta take my computer to where i bought tomorrow.

A:Could BSOD damage your internet's wire?

Short answer...No.

http://www.vistax64.com/general-discussion/261077-could-bsod-damage-your-internets-wire.html
Relevancy 50.74%

i have the usb single user modem that came with bulldog. the thing is that i own a belkin ethernet modem and the wire from the microfilter that currently goes into the usb modem doesnt fit in the belkin router. i know i need ethernet from the phoneline but don't know how to get it.

1) is there a different microfilter that contains an ethernet plug??
2)will i have to buy a different modem that allows me to put in the ADSL line one end and then get ethernet out the other?
3)if i do have to buy a new modem can anyone recommend one???

thanks, sorry if i didnt explain the problem very well!!!
 

A:i want ethernet on the end of a wire instead of ADSL wire....

What kind of plug does your Belkin modem accept?

If the one coming out of your microfilter is a narrow one (RJ11) then you can plug it into the wide (RJ45) socket no problem - the wires used by telephones match across these plugs. If things are the other way around then you can just go buy a cable with proper plugs or an adapter. You can also run the thing without a microfilter just fine.
 

http://www.techspot.com/community/topics/i-want-ethernet-on-the-end-of-a-wire-instead-of-adsl-wire.39288/
Relevancy 50.74%

what makes cat5 cable cat5 cable? as i understand it, it is just 8 normal wires that are jacked in a certain order to allow data transfer. so would it be possible to jack one rj45 jack onto the end of two clipped and stripped rj11 sized phone cables?
logically it seems like it should work...but when i attempted it, it was extremely slow. I was using very very old phone wire so maybe the quality of the wires had something to do with the slowness.
any thoughts on the subject?
-mphair
 

A:phone wire as network wire

There are a number of twists that have to be done to each pair in order for it to pass good signal. Phone cords are not held to the same standards thus what probably resulted in the slowness.
 

https://forums.techguy.org/threads/phone-wire-as-network-wire.453966/
Relevancy 49.45%

Hello!

I am a Battlefield 4 eSports player.
In order to play in the Electronic Sports League, you have to use their Anticheat named ESL Wire.

Well, I've used it since December 2013 to June 2014 when I quit for 3 months with no problem, no errors, no BSODs.

I started to play again in September and when the ESL Wire is transmitting the data (that's a process that takes like 1 minute to load), I get a BSOD.
Well, that didn't happen until then.

The thing is that ESL Wire is the single software that ever caused a BSOD on this computer. (I have it since August 2013).

Here are my dump files: https://www.upload.ee/files/4251466/Dmp_-_Werty.7z.html

Firewall was disabled also. I also tried to reinstall the program with my antivirus turned off.
Updated my GPUs drivers to the latest ones.

Can you help me please?

http://www.techsupportforum.com/forums/f299/esl-wire-causes-bsod-electronic-sports-league-anticheat-the-only-soft-that-causes-it-901186.html
Relevancy 49.45%

This is what happens After a few hours of operation svchost exe crashes Doesn't matter what I'm doing Gaming surfing you name it Faulting module svchost exe version faulting module unknown version faulty address x A few seconds will pass as I accept and my theme will change from the start blue one to the old grey one in a few seconds and then reset to the standard XP one Here's what I know so far When this happens crashes it takes faulty randomly, Svchost.exe no address, faulty module crashes no Windows Audio and a few other services with it which I have to start again using Run services msc I know which instance contains the Windows Audio Svchost.exe crashes randomly, no faulty address, no faulty module service so the problem is Svchost.exe crashes randomly, no faulty address, no faulty module most likely with one of the services hosted within that particular instance of Svchost.exe crashes randomly, no faulty address, no faulty module svchost I'm a bit lost though I don't know what to do because it doesn't give me an address it doesn't tell me which service is messing up so I need some help I have the windows error log and a decent recollection of what has happened since that error started I got a new X-fi sound card a Sound Blaster X-Fi Platinum Fatal ty Champion The errors coincide with me installing that card but I can't see how that would mess up like this though http img imageshack us my php image errorspx jpg I don't know if I'm totally off the mark here but is it fair to assume that it is only ONE instance of svchost crashing The screenshot above shows the svchost hosting the services that go down after the crash I have a saved version of the program error log Right click on This Computer administrate System tools Log Program I have searched far and wide on the internet and tried all kinds of solutions Others have had this problem and it has been linked with the quot Automatic Updates quot service but that did nothing for me whether deleted the whole Windows Update service and re-registered the DLLs in short even though I replaced the Windows Update service and everything related to it with fresh copies generated by Windows itself Another related problem I found was the same message and the same symptom svchost crashing some time after a bootup There was a hotfix for this but I'm already using Windows XP Pro with Service Pack which contains this update and others addressing such issues And I have zero malware on this computer Am I looking at a faulty product here Damaged ram Lastly I have a copy of my error log containing about months before this error started http www megaupload com d DVZTRVWR Any help appreciated I'm going mad just from not knowing where exactly the problem lies

http://www.techsupportforum.com/forums/f10/svchost-exe-crashes-randomly-no-faulty-address-no-faulty-module-370951.html
Relevancy 49.02%

Hey I have recently been getting BSODs randomly At first I thought it was due to my Western Digital HDD going faulty but after buying a new quot SATA and removing the Western Digital one I am still getting BSODs Please help me figure out what is the cause of the BSOD thankyou in advance This is the crash log and PC specs let me know if any extra info is required Source Windows HDD - BSOD Faulty Summary Shut down unexpectedly Date amp amp amp PM Status Report sent Problem signature Problem Event Name BlueScreen OS Version Locale ID Extra information about BSOD - Faulty HDD the problem BCCode f BCP BCP D BCP BCP OS Version Service Pack Product Bucket ID x f Server information bcb a e -c f- -bb b-f f aef ca f CPU gigahertz AMD Phenom II X Motherboard ECS A GM-AD HDD Seagate Barracuda rpm TB PSU Thermaltake Litepower W ATX PSU RAM x gb Corsair Vengeance Dual Channel Operating System Windows Build SP I think nbsp

A:BSOD - Faulty HDD

Memory Testing (including bootable CD's and floppies):

Memtest86
MemScope (Floppy and CD images.)
Roadkil's RAM Test
Microsoft Memory Test (floppy or CD ISO image)

If you have enough memory sticks, you can test them by removing one at a time and see if the problem disappears.

If you are running Vista or 7, tap F8 on boot and choose the memory diagnostic, or if you can boot up, go to Start > Search and type:

mdsched.exe

Choose to run a memory diagnostic on next boot. Or, you can boot from the DVD and run it from there.
 

https://forums.techguy.org/threads/bsod-faulty-hdd.1052813/
Relevancy 49.02%

Hi I have been experiencing a number of issues faulty? Is Various RAM my BSOD with my PC lately Specs below Windows bit Home Premium Intel K Haswell CPU Gigabyte Z X-OC Motherboard Corsair Memory Vengeance Low Profile Jet Black GB x GB DDR MHz Ram Samsung EVO Pro SSD Since I reinstalled windows several months ago I was getting the odd BSOD however it has become much more common almost during every session I can no longer use my pc and sometimes It wont even boot before BSOD I've had PFN LIST CORRUPT E MEMORY MANAGEMENT A PROBLEM DETECTED NEEDS TO SHUT DOWN JRQL NOT Is my RAM faulty? Various BSOD LESS OR EQUAL and something which Is my RAM faulty? Various BSOD mentioned drivers I believe this to be a problem with ram and not drivers as BSOD has got more frequent with no changes to system Drivers are all up to date I have run Windows Memory Diagnostics and it showed hardware problems were detected I could not find any WindowsMemoryDiagnostics-Results in Windows logs following the guide on this forum I've waited but still not there It did finish uninterrupted I am currently running MemTest via usb but it could take a while Does all of the above indicate faulty hardware Likely RAM i definitely got various BSOD that related to some driver issue but i have no idea how to determine which it is Does W save all memory dumps after every BSOD i have seen people post quot logs quot on here and others have managed to determine the cause from it Any way to do this Any help or suggestions would be much appreciated Thanks

A:Is my RAM faulty? Various BSOD

It could be RAM Related.

Cary on running memtest for 9 passes.

Aldo upload your DMP Files, from this link:



   Information
Before posting a BSOD thread, please read the instructions here: Blue Screen of Death (BSOD) Posting Instructions

If you need to add new information like the dump files, please make a new post in your initial BSOD thread. Please do not make an extra new thread.

http://www.sevenforums.com/hardware-devices/345282-my-ram-faulty-various-bsod.html
Relevancy 49.02%

Hey I have recently been getting BSODs randomly At first I thought it was due to my Western Digital HDD going faulty but after buying a new quot SATA and removing the Western Digital one I am still getting BSODs Please help me figure out what is the cause of the BSOD thankyou in advance This is the crash log and PC specs let me know if any extra info is required Log Name System Source Microsoft-Windows-Kernel-Power Date PM Event ID Task Category Level Critical Keywords User SYSTEM Computer Lee-PC Description The system has rebooted without cleanly shutting down first This error could be caused if the system stopped responding crashed or lost power unexpectedly Event Xml lt Event xmlns quot http schemas microsoft com win events event quot gt lt System gt lt BSOD Faulty - HDD Provider Name quot Microsoft-Windows-Kernel-Power quot Guid quot C B A- - C -AC E- C D B quot gt lt EventID gt lt EventID gt lt Version gt lt Version gt lt Level gt lt Level gt lt Task gt lt Task gt lt Opcode gt lt Opcode gt lt Keywords gt x lt Keywords gt lt TimeCreated SystemTime quot - - T Z quot gt lt EventRecordID gt lt EventRecordID gt lt Correlation gt lt Execution ProcessID quot quot ThreadID quot quot gt lt Channel gt System lt Channel gt lt Computer gt Lee-PC lt Computer gt lt Security UserID quot S- - - quot gt lt System gt lt EventData gt lt Data Name quot BugcheckCode quot gt lt Data gt lt Data Name quot BugcheckParameter quot gt x lt Data gt lt Data Name quot BugcheckParameter quot gt x d lt Data gt lt Data Name quot BugcheckParameter quot gt x lt Data gt lt Data Name quot BugcheckParameter quot gt x lt Data gt lt Data Name quot SleepInProgress quot gt false BSOD - Faulty HDD lt Data gt lt Data Name quot PowerButtonTimestamp quot gt lt Data gt lt EventData gt lt Event gt

A:BSOD - Faulty HDD

Post your pc specs. [Make, model] cpu, psu, ram, mobo, hdd, operating system, Disable automatic restart on system failure and enable creation of memory dumps.

http://www.techsupportforum.com/forums/f299/bsod-faulty-hdd-644943.html
Relevancy 49.02%

Hi,
I recently bought a new, 3rd party power cord for my Toshiba Satellite L300 from eBay.
Recently I've noticed that my battery stops charging earlier and earlier. At first it stopped at 87%, then 83%, then 80% all in one week. I've had the computer for about a year which seems a bit early for it to start degrading so fast, so could it be the power cord?

The Toshiba cord says Model: PA-1750-29, Input: 100-240V~ 50-60Hz 1.5A, Output: 19V[solid line above a dotted line]3.95A
The 3rd party cord says Model: PA-34671ACA, Input: 100-240V~1.5A 50/60Hz, Output: 19V[solid over dotted]3.95A

If the new cord is harmful to my battery, I can just solder its input plug onto the Toshiba charger (that's the only bit that was broken) but I'd rather not risk breaking two power cords if I don't need to.

---------------------------------------
Thanks,
Marlon
 

Relevancy 49.02%

Sorry card? Solved: Faulty graphics Or motherboard? faulty that this is quite long but I want to give complete details as to the problem rather than just giving a vague problem Nvidia GT card has been overclocked for the last year Original Stable OC Before Solved: Faulty graphics card? Or faulty motherboard? you panic Solved: Faulty graphics card? Or faulty motherboard? it s been stable and temps have been fine lt My motherboard is a Asus P N-E SLI board The computer is dual boot to Vista for general use and XP x for games ONLY XP IS OVERCLOCKED Vista is not overclocked at all Only the GPU is overclocked in the computer Now the problems started when I moved the computer All the games on x crashed unless I underclocked the machine except UT ancient game which garbled the graphics weapon textures on walls etc I found out it was because somehow the card wasn t plugged in properly - so I pushed it back and I was able to play again Since then sometimes the card is alright and other times it isn t The other day I was playing fallout graphics intensive game for around hours without any problems But right now I boot to vista and within a minute it crashes Other times I was programming not even using graphics and the mouse suddenly has a flickering box around it - then the computer crashes When it crashes the screen goes weird colours like its rendered the screen as bit colours rather than bit and shortly after I get a blue screen with it complaining about a graphics DLL At first giving the card a wiggle in the PCI-E slot fixed it Now I ve discovered that when the garbled graphics come up if I physically push the card upwards in the PCI-E slot whilst the PC is still on they go away by this time the computer has crashed amp so I have to reboot anyway It s nothing to do with the drivers I ve reinstalled them on XP and besides the problem happens on both of the OS on the computer Vista seems to be considerably worse though - XP only crashes once in a while whereas Vista seems to be more unstable If you push the card up quickly sometimes Vista quot recovers quot It says quot the display ddriver stopped responding and has recovered quot or something like that You can then use the computer normally If I push the card down when the computer is working fine the computer crashes Any suggestions whether it s the card or the motherboard I removed the card blew dust off it etc put it back into the machine and the problem still happens although it initially solved it I don t want to spend on a new card to find that it s the MB that s the problem I m wondering if the card is fine since it doesn t have an issue with hours of gaming on a good day If it s a lose connection what can I do about it it s fully pushed into the motherboard If you ve read this far thanks nbsp

Relevancy 48.59%

Hello guys as you know I'm new to this forum and was seeking help on an issue that has been stressing me out and none of the troubleshooting I have done has really helped me clearly The driver that is causing my bsod is affiliated with the process ntoskrnl exe I don't really know what driver that may be some research told me that it was a core file of the windows operating system but I don't know for sure I faulty driver BSOD, have also done the driver verifier for around roughly - hours and when it was running was when it pinpointed me to the process that is used by the driver causing the bsod errors If anyone can look through the logs of my minidumps I also have a program located in the systemroot minidump thats called bluescreenview don't pay attention to that in the zip that would be great System Specs Code Is Windows - x -bit or x x - the original installed OS on the system Yes - BSOD, faulty driver an OEM or full retail version Full Retail Version - What is the age of system hardware Around months - What is the age of OS installation have you re-installed the OS months no Download Link Attachment

A:BSOD, faulty driver

  
Quote: Originally Posted by The Office


Hello guys, as you know I'm new to this forum and was seeking help on an issue that has been stressing me out and none of the troubleshooting I have done has really helped me clearly. The driver that is causing my bsod is affiliated with the process ntoskrnl.exe. I don't really know what driver that may be, some research told me that it was a core file of the windows operating system but, I don't know for sure. I have also done the driver verifier for around roughly 24-36 hours and when it was running was when it pinpointed me to the process that is used by the driver causing the bsod errors. If anyone can look through the logs of my minidumps(I also have a program located in the %systemroot%\minidump thats called bluescreenview, don't pay attention to that in the zip), that would be great .

System Specs:

Code:
Is Windows 7 . . .
- x86 (32-bit) or x64 ? x64
- the original installed OS on the system? Yes
- an OEM or full retail version? Full Retail Version

- What is the age of system (hardware)? Around 5 months
- What is the age of OS installation (have you re-installed the OS?) 5 months, no.

Download Link:
Attachment 150146




Afraid the were no DMP's in the upload. You uploaded the app not the DMPs.

To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

The procedure:

* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.

To ensure minidumps are enabled:

Go to Start, in the Search Box type: sysdm.cpl, press Enter.
Under the Advanced tab, click on the Startup and Recovery Settings... button.
Ensure that Automatically restart is unchecked.
Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
OK your way out.
Reboot if changes have been made.

http://www.sevenforums.com/bsod-help-support/158165-bsod-faulty-driver.html
Relevancy 48.59%

I have two driver faulty BSOD problems I can't open msinfo when I try I get the windows help and error window I posted on the XP forums before being referred here http www techsupportforum com showthread php t The more serious problem is that my system crashes with a faulty driver error when I open a particular application Again I first asked the question in the XP forums http www techsupportforum com showthread php t I've uploaded the HJT files here http fodlujan BSOD faulty driver homestead com files hijackthis log http fodlujan homestead com files result txt Thanks for any help and please let me know if the information provided isn't all you'd like Note Its always better to post the log in the reply Log BSOD faulty driver was analyzed using KRC HijackThis Analyzer - Updated on Get updates at http www greyknight com download htm programs Security Programs Detected Logfile of HijackThis v Scan saved at PM on Platform Windows XP SP WinNT MSIE Internet Explorer v SP Running processes C Documents and Settings Admin Desktop HijackThis exe D system utilities HJT HijackThis exe R - HKCU Software Microsoft Internet Explorer Main Start Page http www westminster edu R - HKCU Software Microsoft Internet Explorer Main Window Title Microsoft Internet Explorer provided by Westminster College Edition R - HKCU Software Microsoft Windows CurrentVersion Internet Settings ProxyServer sproxy R - HKCU Software Microsoft Windows CurrentVersion Internet Settings ProxyOverride westminster edu lt local gt O - HKLM Run sunasDTServ D CounterSpy Client sunasDtServ exe O - HKLM Run sunasServ D CounterSpy Client sunasServ exe O - DPF E DE - - B - F -C E A F E Microsoft PID Sniffer - https support microsoft com OAS ActiveX odc cab O - DPF AA A -F F- -A - B F BB HS live Control - http install homestead com site I ve HS live cab O - DPF B-B - D-A D -FCFDF E C WUWebControl Class - http v windowsupdate microsoft co O - DPF D D - - D -BDCD- C F A B HouseCall Control - http a g akamai net ll xscan cab O - Service Brother Popup Suspend service for Resource manager brmfrmps - Unknown owner - C WINDOWS system Brmfrmps exe quot -service file missing O - Service BrSplService Brother XP spl Service - brother Industries Ltd - C WINDOWS system brsvc a exe End of KRC HijackThis Analyzer Log

A:BSOD faulty driver

Hi Lujan -

Did you run the suggested scans? Adaware and Spybot S&D? I can see evidence of Housecall's ActiveX control...did it find anything?

There is no malware showing in your HJT log. From your other posts, it seems like you have windows issues. That said, we can use another scanner to see if there is any malware present. Please do the following:

Please download Ad-aware at http://www.lavasoftusa.com/ and install it if you don't have it already. Make sure it's the newest version and check for any updates before running it. Also go to http://www.lavasoftusa.com/software/...2cleaner.shtml to download the plug-in for fixing VX2 variants. To run this tool, go into Ad-aware->Add-ons and select VX2 Cleaner. Then click Run Tool and OK to start it. If it's clean, it will say Status System Clean. Otherwise, you will have to click on the Clean button to remove the VX2 infection. Also make sure to customize the settings in Ad-aware at http://www.greyknight17.com/spyware.htm#adaware for better scan results. Run the scan and fix everything that it finds.

Download and install Spybot S&D http://security.kolla.de/. Run Spybot and click on the 'Search for Updates' button. Install any updates that are available.

Now click Mode menu and choose 'Advanced Mode'. Next click on Immunize to your left. Click the Immunize button (green cross) on top to Immunize your computer - you should do this each time there is an update. Now go to Tools->Resident and make sure that TeaTimer is checked. What this will do is monitor any system/registry changes and will ask you for permission to change any of these settings.

Now click on the 'Spybot-S&D' option on the top left to go back to the main screen. Next click on the 'Check for Problems' button. Let it run the scan. If it finds something, check all those in RED and hit the 'Fix Selected Problems' button. Exit Spybot. If you keep getting the DSO Exploit entries, even after you updated Windows and fixed them, then download the Spybot DSO Exploit Fix http://majorgeeks.com/download4392.html and install it over the current Spybot installation.

Please empty any Quarantine folder in your antivirus program and purge all recovery items in the Spybot program (if you use it) before running this tool.

Download the Mwav virus checker at http://www.mwti.net/antivirus/mwav.asp (Use Link 3)

1. Save it to a folder.
2. Reboot into Safe Mode.
3. Double click the Mwav.exe file. This is a stand alone tool and NOT just a virus checker......so it won't install anything.
4. Select all local drives, scan all files, and press SCAN. When it is completed, anything found will be displayed in the lower pane.
5. In the Virus Log Information Pane......
Left click and highlight all the information in the Lower pane --- Use &CTRL C &on your keyboard to copy everything found in the lower pane and save it to a notepad file
*Note* If prompted that a virus was found and you need to purchase the product to remove the malware, just close out the prompt and let it continue scanning. We are not going to use this to remove anything...but to ID the bad files.

Once you copy that to a Notepad file...highlight the text and copy it here.

http://www.techsupportforum.com/forums/f284/bsod-faulty-driver-54246.html
Relevancy 48.59%

I am getting frequent BSODs lately and my computer restarts randomly. I suspect its the net adapter, cause when I remove it, it doesn't happen. I bought a new one, replaced it, but the old one is still listed in Devices. I can't uninstall it, so I disabled it.
Here is the dump file I got from the BSOD. I need help to determine if its really a problem with the net adapter, not with something else. Thank You.
 

A:Can a faulty net adapter cause BSOD?

The crash dump does not point towards the net adapter or its driver but the D1 error code usually relates to a faulty/corrupt driver.

What is the problem with uninstalling the old driver, that is usually fairly straightforward.

Are you still getting BSOD's with the new adapter installed?
 

http://www.techspot.com/community/topics/can-a-faulty-net-adapter-cause-bsod.173377/
Relevancy 48.59%

Hey, Just bought some parts into my PC and decided to reinstall who OS to SSD. Everything is disabled, Windows is also nerfed, I have turned off things like before.
These disabled things worked on the older PC without any BSODs. With this new one I am having BSODs, I thought it was pagefile but seems It isnt.
SSD is also up to date with Windows, except pagefile. Everything is disabled to decrease the daily data usage for SSD.
I did already a couple times Memtest86, there were no errors. I just stressed RAMs for 4hours and voila:
Could it be?

A:BSOD caused by faulty RAM?

Try installing a genuine copy of Windows. The ACER PID on your retail Gigabyte motherboard means you installation is counterfeit. It's worthless trying to debug counterfeit installations such as yours due to the amount of crap modified into the code. Get a genuine installation and if you're still getting BSODs we'll be glad to help.
Code:
Host Name: GLMK
OS Name: Microsoft Windows 7 Ultimate
OS Version: 6.1.7601 Service Pack 1 Build 7601
OS Manufacturer: Microsoft Corporation
OS Configuration: Standalone Workstation
OS Build Type: Multiprocessor Free
Registered Owner: golemka
Registered Organization:
Product ID: 00426-OEM-8992662-00006 ---> ACER PID
Original Install Date: 2015.04.27, 20:32:45
System Boot Time: 2015.05.21, 21:07:57
System Manufacturer: Gigabyte Technology Co., Ltd.
System Model: To be filled by O.E.M.
System Type: x64-based PC

http://www.sevenforums.com/bsod-help-support/370556-bsod-caused-faulty-ram.html
Relevancy 48.59%

my system specs are Asus p QL motherboard Intel core quad q Nvidia geforce gt graphics card gb ddr ram anyway my system randomly crashes and sometimes goes into the BSOD i have the crash dumps saved but not sure how to paste them here but seems like i might have a fault USB driver even though i uninstalled most of my usb drivers - - dmp PFN LIST CORRUPT x e x x b x x b ntkrnlpa exe ntkrnlpa exe dcdfc NT Kernel amp System Microsoft Windows Operating System Microsoft Corporation win gdr - -bit ntkrnlpa exe dcdfc ntkrnlpa exe e c ntkrnlpa exe b bc ntkrnlpa exe b fe C Windows Minidump - - dmp Click to expand - - dmp IRQL NOT LESS OR EQUAL x a x da x x x eb nvlddmkm sys nvlddmkm sys e NVIDIA Windows Kernel Mode Driver Version NVIDIA Windows Kernel faulty BSOD driver? usb Mode Driver Version NVIDIA Corporation -bit ntkrnlpa exe b ntkrnlpa exe ntkrnlpa exe f ntkrnlpa exe C Windows Minidump - - dmp Click to expand - - dmp DRIVER IRQL NOT LESS OR EQUAL x BSOD faulty usb driver? d x x BSOD faulty usb driver? x x ba dxgmms sys dxgmms sys DirectX Graphics MMS Microsoft Windows Operating System Microsoft Corporation win rtm - -bit ntkrnlpa exe b dxgmms sys dxgmms sys a dxgmms sys b c C Windows Minidump - - dmp Click to expand - - dmp DRIVER VERIFIER DETECTED VIOLATION x c x x x dd b x ntkrnlpa exe ntkrnlpa exe dcdfc NT Kernel amp System Microsoft Windows Operating System Microsoft Corporation win gdr - -bit ntkrnlpa exe dcdfc ntkrnlpa exe ffd tcpip sys cee ndis sys d C Windows Minidump - - dmp Click to expand nbsp

A:BSOD faulty usb driver?

Looks like a Nvidia video driver fault to me... What version of Windows are you running?
 

http://www.techspot.com/community/topics/bsod-faulty-usb-driver.173144/
Relevancy 48.59%

Ive been getting BSOD's for months now. every time i take it back to be looked at under warranty they say that its all fine hardware wise and theres nothing wrong with it.
It started constanly blue screening this morning so i have formatted and have a fresh install of windows 7 on with no updates and no drivers.
it then blue screened while i was out side. ive uploaded the mem dump file.
if anyone could take a look at it and let me know what they find that would be amazingly helpful.

A:BSOD Faulty memory?

  
Quote: Originally Posted by Rothel


Ive been getting BSOD's for months now. every time i take it back to be looked at under warranty they say that its all fine hardware wise and theres nothing wrong with it.
It started constanly blue screening this morning so i have formatted and have a fresh install of windows 7 on with no updates and no drivers.
it then blue screened while i was out side. ive uploaded the mem dump file.
if anyone could take a look at it and let me know what they find that would be amazingly helpful.


Hi and welcome. Little doubt about what caused this crash. You were runnning winsat, and the video driver folded

I would re install the video driver
run a system file check to verify and repair your system files
dl memtestx86 and run it for several hours

Good Luck

Ken J+

Code:
Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\K\Desktop\121809-13291-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*d:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (2 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Machine Name:
Kernel base = 0xfffff800`02805000 PsLoadedModuleList = 0xfffff800`02a42e50
Debug session time: Thu Dec 17 23:07:27.535 2009 (GMT-5)
System Uptime: 0 days 1:50:36.111
Loading Kernel Symbols
...............................................................
................................................................
.........
Loading User Symbols
Loading unloaded module list
....
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 3B, {c0000005, fffff880041dba6c, fffff88005676af0, 0}

Probably caused by : dxgmms1.sys ( dxgmms1!VIDMM_GLOBAL::xWaitForAllEngines+a4 )

Followup: MachineOwner
---------

1: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

SYSTEM_SERVICE_EXCEPTION (3b)
An exception happened while executing a system service routine.
Arguments:
Arg1: 00000000c0000005, Exception code that caused the bugcheck
Arg2: fffff880041dba6c, Address of the exception record for the exception that caused the bugcheck
Arg3: fffff88005676af0, Address of the context record for the exception that caused the bugcheck
Arg4: 0000000000000000, zero.

Debugging Details:
------------------
EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.

FAULTING_IP:
dxgmms1!VIDMM_GLOBAL::xWaitForAllEngines+a4
fffff880`041dba6c 483901 cmp qword ptr [rcx],rax

CONTEXT: fffff88005676af0 -- (.cxr 0xfffff88005676af0)
rax=000000000003cf15 rbx=fffffa8005728000 rcx=00fff8a008227fd0
rdx=fffffa800561f000 rsi=fffff8a0082243a0 rdi=fffffa8005728000
rip=fffff880041dba6c rsp=fffff880056774d0 rbp=0000000000000001
r8=fffffa80057293a8 r9=0000000000000001 r10=0000000000000018
r11=0000000000000000 r12=0000000000000000 r13=0000000000000003
r14=0000000000000000 r15=00fff8a008227fd0
iopl=0 nv up ei pl zr na po nc
cs=0010 ss=0018 ds=002b es=002b fs=00... Read more

http://www.sevenforums.com/bsod-help-support/47675-bsod-faulty-memory.html
Relevancy 48.59%

Before I describe my problem I'd like to thank the people who donate their time I've been having minor issues pop up and I appreciate all the help I just installed Vampire the Masquerade Bloodlines and when I boot it up I'm getting the BSOD informing me I have a faulty driver that tried to corrupt the system and that BSOD faulty driver it BSOD faulty driver needs to be replaced The error code is x C x x x x I've tried reinstalling and patching and all that I find this odd because the error points to a fundamental problem with my system but no other application including games- BSOD faulty driver I have KOTOR and Farcry installed right now triggers the issue I'm guessing I need to figure out which driver is causing the problem then go about replacing BSOD faulty driver it but I haven't been able to determine how I should go about doing so The eventlog gives me no errors besides the inability to boot viamraid which is a leftover of a poor deletion of a RAID utility for the system or the application Thanks again for any advice

A:BSOD faulty driver

This article may help you

http://www.techsupportforum.com/forums/f10/bsod-faulty-driver-54138.html
Relevancy 48.59%

my system specs are Asus p QL motherboard Intel core quad q Nvidia geforce gt graphics card gb ddr ram anyway my system randomly crashes and sometimes goes driver? faulty BSOD usb into the BSOD BSOD faulty usb driver? i have the crash dumps saved but not sure how to paste them here but seems like i might have a fault USB driver even though i uninstalled most of my usb drivers Quote - - dmp PFN LIST CORRUPT x e x x b x x b ntkrnlpa exe ntkrnlpa exe dcdfc NT Kernel amp System Microsoft Windows Operating BSOD faulty usb driver? System Microsoft Corporation win gdr - -bit ntkrnlpa exe dcdfc ntkrnlpa exe e c ntkrnlpa exe b bc ntkrnlpa exe b fe C Windows Minidump - - dmp Quote - - dmp IRQL NOT LESS OR EQUAL x a x da x x x eb nvlddmkm sys nvlddmkm sys e NVIDIA Windows Kernel Mode Driver Version NVIDIA Windows Kernel Mode Driver Version NVIDIA Corporation -bit ntkrnlpa exe b ntkrnlpa exe ntkrnlpa exe f ntkrnlpa exe C Windows Minidump - - dmp Quote - - dmp DRIVER IRQL NOT LESS OR EQUAL x d x x x x ba dxgmms sys dxgmms sys DirectX Graphics MMS Microsoft Windows Operating System Microsoft Corporation win rtm - -bit ntkrnlpa exe b dxgmms sys dxgmms sys a dxgmms sys b c C Windows Minidump - - dmp Quote - - dmp DRIVER VERIFIER DETECTED VIOLATION x c x x x dd b x ntkrnlpa exe ntkrnlpa exe dcdfc NT Kernel amp System Microsoft Windows Operating System Microsoft Corporation win gdr - -bit ntkrnlpa exe dcdfc ntkrnlpa exe ffd tcpip sys cee ndis sys d C Windows Minidump - - dmp

http://www.techsupportforum.com/forums/f299/bsod-faulty-usb-driver-611208.html
Relevancy 48.16%

Two times in the last week my monitor (a KDS visual sensations CRT) has come on with the image looking like an hourglass (wide at the top and bottom, pinched in the center). This happened imediately upon boot up and both times rebooting has returned the monitor to normal, leaving the computer running does not bring the problem back. Which is more likely, that my monitor is beginning to fail or maybe my graphics card (a saphire, ATI radeon 7000) is failing? Is there some way (other than swaping my monitor out and trying another as this seems so far to be an intermitent problem and may not arise when a new monitor is conected) to check and see which it may be?
 

Relevancy 48.16%

I am getting frequent BSODs lately and my computer restarts randomly I suspect its the net adapter cause when I remove it it doesn t happen I bought a new one replaced it but the old one is still listed in Devices I can t uninstall it so I disabled it Here is the dump file I got from the BSOD Opened log file adadper BSOD??? net causing Faulty c debuglog txt Microsoft R Windows Debugger Version X Copyright c Microsoft Corporation All Faulty net adadper causing BSOD??? rights reserved Loading Dump File C WINDOWS Minidump Mini - dmp Mini Faulty net adadper causing BSOD??? Kernel Dump File Only registers and stack trace are available Symbol search path is SRV c symbols http msdl microsoft com download symbols Executable search path is C WINDOWS C WINDOWS system C WINDOWS system drivers Windows XP Kernel Version Service Pack UP Free x compatible Product WinNt Built by xpsp - Machine Name Kernel base x d PsLoadedModuleList x b c Debug session time Sun Nov UTC System Uptime days Loading Kernel Symbols Loading User Symbols Loading unloaded module list Bugcheck Analysis Use analyze -v to get detailed debugging information BugCheck D f Probably caused by ntoskrnl exe nt KiTrap E Followup MachineOwner --------- kd gt analyze -v r kv lmtn logclose q Bugcheck Analysis DRIVER IRQL NOT LESS OR EQUAL d An attempt was made to access a pageable or completely invalid address at an interrupt request level IRQL that is too high This is usually caused by drivers using improper addresses If kernel debugger is available get stack backtrace Arguments Arg memory referenced Arg IRQL Arg value read operation write operation Arg f address which referenced memory Debugging Details ------------------ WRITE ADDRESS CURRENT IRQL FAULTING IP b faf db f CUSTOMER CRASH COUNT DEFAULT BUCKET ID DRIVER FAULT BUGCHECK STR xD TRAP FRAME f a a -- trap xfffffffff a a trap xfffffffff a a ErrCode eax ebx f a b ecx f a bd edx b a esi edi f a c eip f esp f a aac ebp f a b iopl nv up ei ng nz na pe nc cs ss ds es fs gs efl f trap Resetting default scope LAST CONTROL TRANSFER from f to e f STACK TEXT f a a f badb d b a f nt KiTrap E x WARNING Frame IP not in any known module Following frames may be wrong f a aa f a b xf STACK COMMAND kb FOLLOWUP IP nt KiTrap E e f f test dword ptr ebp h h SYMBOL STACK INDEX SYMBOL NAME nt KiTrap E FOLLOWUP NAME MachineOwner MODULE NAME nt IMAGE NAME ntoskrnl exe DEBUG FLR IMAGE TIMESTAMP eab FAILURE BUCKET ID xD nt KiTrap E BUCKET ID xD nt KiTrap E Followup MachineOwner --------- eax ffdff c ebx ecx edx esi f edi eip e f esp f a a ebp f a a iopl nv up ei ng nz na pe nc cs ss ds es fs gs efl nt KiTrap E x e f f test dword ptr ebp h h ss f a aa ChildEBP RetAddr Args to Child f a a f badb d b a f nt KiTrap E x FPO TrapFrame f a a WARNING Frame IP not in any known module Following frames may be wrong f a aa f a b xf start end module name d ed nt ntoskrnl exe Sun Apr EAB ee e hal halaacpi dll Sun Apr F bf bf dxg dxg sys Sun Apr bf bf a nv disp nv disp dll Mon Apr A bf bf c win k win k sys Sun Apr F A bffa bffe c ATMFD ATMFD DLL Mon Apr A D f f a HTTP HTTP sys Sun Apr BC f fe f fc srv srv sys Sun Apr BBC f f f a c mrxdav mrxdav sys Sun Apr CA f b f b wdmaud wdmaud sys Sun Apr C E f df f e a PSINProc PSINProc sys unavailable f e a f e PSINFile PSINFile sys unavailable f e f e b PSINProt PSINProt sys unavailable f e b f e d PSINAflt PSINAflt sys unavailable f e d f e ndisuio ndisuio sys Sun Apr D f ecd f edbd sysaudio sysaudio sys Sun Apr BEB f c f ca dump atapi dump atapi sys Sun Apr D f ca f cce ipnat ipnat sys Sun Apr f ccf f d e mrxsmb mrxsmb sys Sun Apr C A f da f da Dxapi Dxapi sys Fri Aug B D F f db f db f mouhid mouhid sys Fri Aug B D FD f dbb f dbd hidusb hidusb sys Sun Apr C f ddf f dfe psinknc psinknc sys unavailable f dfe f e e rdbss rdbss sys Sun Apr EE f e f e ab afd afd sys Sun Apr CBA f e b f e c netbt netbt sys Sun Apr D B f e f ecb tcpip tcpip sys Sun Apr CEC f ecc f ede ipsec ipsec sys Sun Apr CCE f c f f update update sys Sun Apr... Read more

A:Faulty net adadper causing BSOD???

goto the manufactures website and find the LATEST driver for the card... that should do it
 

https://forums.techguy.org/threads/faulty-net-adadper-causing-bsod.1026746/
Relevancy 48.16%

Hi all this is my first post on W forum's so give me heads up on protocol if anything is missed ----------------------------------------------------------------------------------- Short story Computer has been giving me BSOD's increasingly at random over the last weeks BSOD has always been (Faulty Recurring BSOD - SSD?) Memory_Management the same titled quot MEMORY MANAGEMENT Recurring BSOD - Memory_Management (Faulty SSD?) quot with one sole exception which was titled quot BAD POOL HEADER quot or something along those lines BIOS and SSD Firmware are at their latest releases Included below are the dump files for the crash ----------------------------------------------------------------------------------- Longer version My opinion at the moment is my crucial m SSD's are failing reads and writes causing the system to crash I've had spontaneous crashes on steam aswell which is located entirely on a separate gb M SSD game files also constantly require validation and often need to be downloaded again Plugins in chrome aswell as Skype crash repeatedly then launch and run without a hiccup seemingly at random Crashes normally occur within a few moments of startup or not for a long time BSOD's did not occur for a few days after reformatting and updating SSD Firmware to G From F BIOS for the Z was updated at the same time System is water cooled however I do not believe this is at all relevant to the crashes since the Sinks have been attached properly and heat readings on all hardware never exceed C with the exception of the GPU under load I know NAND flash is always going to be more volatile memory than magnetic platters but I'm crossing my fingers I don't have to replace any hardware to fix this Any help insights on PC health in general are greatly appreciated thanks in advance to those who reply as this issue is almost rendering the machine unusable

A:Recurring BSOD - Memory_Management (Faulty SSD?)

Your crash dumps are not showing any finite probable cause. In such a situation, it is better to enable Driver Verifier to monitor the drivers.

Driver Verifier - Enable and Disable

Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.

Let us know the results, with the subsequent crash dumps, if any.

Edit: Follow what marsmimar said at first.

http://www.sevenforums.com/bsod-help-support/266896-recurring-bsod-memory_management-faulty-ssd.html
Relevancy 48.16%

hi
Can somebody help me find whats causing the bsod? I finally gave up a few days ago thinking it was software related, but reinstalled OS completely and getting it even if it is a fresh system. removed 2 memory stick at a time, thinking its memeory fault, ran MS memory test without problem and I still get random bsod:s. I get it even if the computer is idle! The bsod doesn't look the same (to me!!) and I was hoping somebody could help me out.

attatching 2 outputs from bsod and a PSTAT.exe output as well hoping u guys can help me track down the problem..

Regards

//Lasse
 

A:help finding faulty driver in bsod

Hello and welcome to Techspot.

Go HERE and follow the instructions.

If that doesn`t help. Zip 5 or 6 of your latest minidumps together, and attach them here.

Regards Howard :wave: :wave:
 

http://www.techspot.com/community/topics/help-finding-faulty-driver-in-bsod.43377/
Relevancy 48.16%

Hi all, after searching Google I came upon this site and it seems wonderful especially for fixing computer issues. Anyway, about a day ago and several times after my computer has blue screened. It happened too fast the first few times for me to understand what was happening, but I read a bit of it before it restarted and it said it had to do with faulty drivers. What program, or what should I do to eliminate or restore these drivers so my computer doesn't blue screen? I checked the event log but I couldn't understand it, I'm relatively not that good at understanding computers. I can provide you guys with the event logs if you'd like, just let me know how. (also the blue screen happens seemingly randomly)
 

A:BSOD, apparently due to faulty drivers

Are there any minidumps to post? Go to C:\Windows/minidumps and see if you find any files with a .dmp extension. Select them all, right-click and send them to a compressed zipped folder. Upload this folder here. What is this computers make and model? What version of Windows are you running?
 

http://www.techspot.com/community/topics/bsod-apparently-due-to-faulty-drivers.182407/
Relevancy 48.16%

I have recently upgraded my RAM from 4BG to 8 and have no been getting the BSOD for the first time ever. They are never the same... I've had the IRQL_NOT_LESS_OR_EQUAL and the UNEXPECTED_KERNEL_MODE errors. I am not so computer-savvy that I build them, but I know enough to add RAM.

9 x out of 10 it will happen during gaming, streaming or other video-intensive applications.

I have tried to test my ram but after the test runs I never see a report giving me the status of the ram to ensure all blocks are working properly.

Halp? HOMEDESK-PC-Sat_07_09_2016_230647_05.zip

http://www.tenforums.com/bsod-crashes-debugging/55748-suddenly-getting-bsod-worried-new-ram-faulty.html
Relevancy 48.16%

Hi
Can a faulty power supply course BSOD?
Thx

A:Can a faulty power supply course BSOD?

It most certainly can. Please post your BSOD log so that our resident experts can analyze it for you.

http://www.sevenforums.com/crashes-d...tructions.html

If you can get into the BIOS you might want to check the listings for your PSU voltages and temperatures and post them here.

Failing that, check to see if the PSU is overheating. Better still, remove it and either check it with a wattmeter/ammeter if you have one or take it to your local repair shop to have it checked.

http://www.sevenforums.com/bsod-help-support/195226-can-faulty-power-supply-course-bsod.html
Relevancy 48.16%

A few weeks ago I started having many BSODs mostly while playing Dawn of War after & faulty RAM replacing random BSOD before II or Crusader Kings II but just in case I thought my games were the issue random BSOD before & after replacing faulty RAM also random BSOD before & after replacing faulty RAM a few while on the internet or doing nothing at all Did some research ran some diagnostics determined it was probably bad memory I ran Memtest and did indeed find errors Continued testing to find only one stick of RAM was bad tested the good one in both slots to see if they were also at fault Didn't seem like it so I ordered a replacement I considered upgrading but decided what I had had served me well enough the last - years As far as I could tell both before ordering and now that it's arrived and been installed this is identical https www natex us ProductDetails FU o Aod-F A g No BSODs as far as I remember in the days before the RAM arrived though I didn't use my laptop much so maybe they just didn't have a chance to Several since but I just got done running passes with Memtest over the last hours and found no errors same as the pass just after I put it in Normally when I have computer issues I stubbornly work it out Googling others' threads but since this may yet be a hardware rather than software problem and I don't want to waste money or accidentally make it expensively worse poking through the innards of my laptop I'm registering myself

A:random BSOD before & after replacing faulty RAM

Hi montago,

Can you follow the link below and post the additional information?
Blue Screen of Death (BSOD) Posting Instructions

Thank you. It is a very big help in analyzing crashes.

http://www.sevenforums.com/bsod-help-support/366453-random-bsod-before-after-replacing-faulty-ram.html
Relevancy 48.16%

Hello and thanks in advance for your time and energy I ve been getting blue screen s intermittently for a few weeks now and can t seem to isolate what the problem might be I can t pin it down to anything installed or updated recently and I also checked inside the computer for excessive dust or anything that might not be seated correctly like the RAM but is driver find BSOD-can't faulty which everything seems fine BSOD-can't find which driver is faulty It tends to happen when I m running several things at once ie -importing a c d with iTunes defragmenting with Diskeeper Lite and running say a Kaspersky AV or Superantispyware scan I ve tried running Driver Verifier but am not sure what I m looking for as no specific driver is mentioned but this is the stop message I get when verifying all the drivers DMA subsystem has detected an illegal DMA operation initiated by the driver being verified The faulty driver must be replaced with a working version stop X E Finally this is the stop message I got during normal use not using Driver Verifier Driver corrupted mmpool X D Here s the system summary and thanks again for your help OS Name- Microsoft Windows XP Home Edition Version- Service Pack Build OS Manufacturer- Microsoft Corporation System Type- X -based PC Processor- x Family Model Stepping GenuineIntel Mhz Processor- x Family Model Stepping GenuineIntel Mhz BIOS Version Date- Phoenix Technologies LTD ASUS P N -SLI PREMIUM ACPI BIOS Revision SMBIOS Version- Windows Directory- C WINDOWS System Directory- C WINDOWS system Boot Device- Device HarddiskVolume Locale United States Hardware Abstraction Layer- Version quot xpsp sp rtm - quot Time Zone- Central Daylight Time Total Physical Memory- MB Available Physical Memory- GB Total Virtual Memory- GB Available Virtual Memory- GB Page File Space- GB Page File- C pagefile sys nbsp

Relevancy 47.73%

Seven Forums I've been having a big BSOD problem It happens about - times a day all quite random never doing the same thing when it occurs watching a Random Bad Drivers?, BSOD, Faulty ntoskrnl.exe mainly video on YouTube music browsing gaming typing or just waking up from sleep mode I've been having this problem for months I have reformatted multiple times thinking starting clean would help I must either be installing a bad driver or something is wrong with my installation CD I originally used AVG on this most recent Windows Enterprise bit install but read the BSOD issues with it so switched to MSE after using the AVG removal tool Mainly the BSOD are caused by ntoskrnl exe according to WhoCrashed with various problems such as MEMORY MANAGEMENT or IRQL NOT LESS OR EQUAL I've Random BSOD, Bad Faulty Drivers?, mainly ntoskrnl.exe tried searching around for similar problems but still haven't found the right solution I've downloaded WhoCrashed to analyze my crash dumps and the conclusion leads me to believe it is faulty drivers not a hardware problem Even so I ran MemTest on each stick of RAM currently using x GB which are only months old and each RAM slot module for a couple hours each time with no errors found If there is not an obvious solution I may try for even longer but I don't suspect this as the RAM is new Believing it was a drivers issue I downloaded a trial version of DriversMax which I then scanned my system for and updated my drivers Still I have BSOD problems I updated all the main drivers shown in DriverMax and my nVidia GTX drivers I have tried to use the quot sfc scannow quot command twice before last week but it leads to a BSOD So how and what else should I test for Is WhoCrashed providing Random BSOD, Bad Faulty Drivers?, mainly ntoskrnl.exe me with a correct conclusion and it is a faulty driver I am not aware of Should I provide any more info Attached is my information with the SF Diagnostics Tool I'll deeply appreciate all the help and hopefully we can have this problem solved Thanks a lot in advanced

A:Random BSOD, Bad Faulty Drivers?, mainly ntoskrnl.exe

Pardon the extra post, but I accidently grabbed the wrong ZIP file which is missing information. I attached the NEWER ZIP file with everything included to check.

Thanks!

http://www.sevenforums.com/bsod-help-support/256507-random-bsod-bad-faulty-drivers-mainly-ntoskrnl-exe.html
Relevancy 47.73%

Hi, I'm having problems with random but frequent BSOD. It occurs randomly, sometimes when idle, sometimes when playing SC2/WC3 and sometimes during startup. I think the problem lies with the motherboard's RAM sockets and the RAM sticks themselves, but I would like a professional opinion before ordering new parts.

A:Frequent BSOD, need to determine faulty parts

If you suspect that memory is your issue, please follow this Tutorial. Post back the results.

http://www.sevenforums.com/bsod-help-support/229011-frequent-bsod-need-determine-faulty-parts.html
Relevancy 47.73%

I am getting frequent BSODs lately and my computer restarts randomly. I suspect its the net adapter, cause when I remove it, it doesn't happen. I bought a new one, replaced it, but the old one is still listed in Devices. I can't uninstall it, so I disabled it.
Here is the dump file I got from the BSOD. I need help to determine if its really a problem with the net adapter, not with something else. Thank You.

A:Suspected faulty net adapter causing BSOD

NOTE: I have severe eye problems. If I do not respond to your postings, please PM another staff member for assistance.

NOTE: Please provide the following information for a more detailed response: http://www.techsupportforum.com/foru...ta-452654.html

There's not a whole bunch of info in the uploaded text file. It points to ntoskrnl.exe - which is unlikely to be the cause. we'll need the info requested above in order to massage a bit more info out of your system.

Bug, FWIW, if the BOSD's stop when you replace the network card - then that's most likely the problem.

To uninstall the old card, first remove the software for it from Control Panel...Programs...Uninstall a program. Then, if the device is still listed in Device Manager, enable it - then right click on the device and select "Uninstall". The system may ask you if you want to remove the driver software. Check the box and click OK. Then shut the system down and physically remove the device from your system.

If the device is built into your motherboard, you'll have to disable the device in the BIOS.

Also, please run Driver Verifier according to these instructions:

Quote:




Using Driver Verifier is an iffy proposition. Most times it'll crash and it'll tell you what the driver is. But sometimes it'll crash and won't tell you the driver. Other times it'll crash before you can log in to Windows. If you can't get to Safe Mode, then you'll have to resort to offline editing of the registry to disable Driver Verifier.

So, I'd suggest that you first backup your stuff and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Special Pool" and "Low Resource Simulation" and click "Next"
NOTE: You can use Low Resource Simulation if you'd like. From my limited experimentation it makes the BSOD's come faster.
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to crash to the Blue Screen. Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).

Reboot into Windows (after the crash) and turn off Driver Verifier by going back in and selecting "Delete existing settings" on the first page, then locate and zip up the memory dump file and upload it with your next post.

If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.

If that doesn't work, post back and we'll have to see about fixing the registry entry off-line:

Code:
Delete these registry keys to stop Driver Verifier from loading (works in XP, Vista, Win7):
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management\VerifyDrivers
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management\VerifyDriverLevel
More info on this at this link: Using Driver Verifier to identify issues with Windows drivers for advanced users




Good Luck!

http://www.techsupportforum.com/forums/f299/suspected-faulty-net-adapter-causing-bsod-612366.html
Relevancy 47.73%

Hi there For a few weeks now i have had a few BSOD's One being irql_not_less_or_equal_too

But that i have tracked down to a faulty graphics card which the manufacture has now replaced (Ati 5870 Hd)

The machine seemed to be running fine and then last night i got
" A driver has overrun a stacked based buffer "

I am running an I7, with Gigabyte 333 Mobo and 6gb Of tripple channel ram

The machine is overclocked to 4.0ghz (Not done by myself done by overclockers)

This new Bsod has come after installing the new graphics card and happened while i was playing blackops.

I have attached the latest MiniDump file. and the Last minidump file before the new graphics card.

I have run Memtest for 17 passes and 0 Failures.

I am probably going to run a benchmark for a while see if i can replicate.

Any ideas ?????

Thanks

A:Faulty Graphics card replaced and Still Getting BSOD

Please provide this information: http://www.sevenforums.com/crashes-d...tructions.html

Next, please stop the overclock and return the system to default values. Test to see if this stops the BSOD's. If the BSOD's continue, we'll suggest some other tests. The overclock is very radical (2.800 to 3.822 gHz) and is (IMO) most likely the issue here. Since you passed MemTest I'd have to suspect that some overclocked component of the motherboard is causing the BSOD's.

Although limited to only 2 memory dumps, here's what I've found:
2 different BSOD error codes blaming the kernel (core of the OS). If this was the case, I'd expect more errors than just the occasional BSOD - so something else must be to blame.

This may be the start of a pattern indicating a hardware problem, so I suggest starting with these free diagnostics (skip MemTest as you've already run it):





Quote:
I suggest starting all troubleshooting with the following diagnostic tests. They'll save you a lot of time and heartache if there is a hardware failure, and you'll have the disks on hand in case you need them in the future:





Quote:
H/W Diagnostics:
Please start by running these bootable hardware diagnostics:
http://www.carrona.org/memdiag.html (read the details at the link)
http://www.carrona.org/hddiag.html (read the details at the link)

Also, please run one of these free, independent online malware scans to ensure that your current protection hasn't been compromised: http://www.carrona.org/malware.html (read the details at the link)





I am particularly concerned about the age of your USB 3.0 controller drivers. Please disable the device and remove the drivers to test and see if that's the cause.

Beyond that, the problem can also be caused by incompatible or corrupted drivers. Please do the following:
OLDER DRIVERS PRESENT IN THE DUMP FILES
- Please update these drivers from the device manufacturer's website - or uninstall/remove them from your system. Reference links are included below.
- DO NOT use Windows Update or the Update Drivers function of Device Manager.
- Please feel free to post back about any drivers that you are having difficulty locating.
- Windows Update exceptions may be noted below for Windows drivers:





Quote:

Code:

jraid.sys Wed Oct 07 07:26:03 2009 (4ACC7ACB)
amdxata.sys Fri Mar 19 12:18:18 2010 (4BA3A3CA)
ehdrv.sys Thu Dec 09 00:29:58 2010 (4D006956)
eamonm.sys Thu Dec 09 00:29:20 2010 (4D006930)
GEARAspiWDM.sys Mon May 18 08:17:04 2009 (4A1151C0)
nusb3xhc.sys Fri Sep 25 09:58:31 2009 (4ABCCC87)
atikmpag.sys Wed Jan 26 17:13:33 2011 (4D409C8D)
Rt64win7.sys Thu Aug 20 12:05:06 2009 (4A8D7432)
AtihdW76.sys Wed Nov 17 07:02:04 2010 (4CE3C43C)
hamachi.sys Thu Feb 19 05:36:41 2009 (499D3639)
mcdbus.sys Tue Feb 24 05:34:07 2009 (49A3CD1F)
nusb3hub.sys Fri Sep 25 09:58:23 2009 (4ABCCC7F)
epfwwfpr.sys Thu Dec 09 00:26:09 2010 (4D006871)
point64.sys Tue Dec 14 06:09:25 2010 (4D075065)
RTKVHD64.sys Wed Oct 21 10:27:48 2009 (4ADF1A64)
rtkio.sys Sat Jun 20 02:00:25 2009 (4A3C7AF9)

http://www.carrona.org/dvrref.html#jraid.sys
http://www.carrona.org/dvrref.html#amdxata.sys
http://www.carrona.org/dvrref.html#ehdrv.sys
http://www.carrona.org/dvrref.html#eamonm.sys
http://www.carrona.org/dvrref.html#GEARAspiWDM.sys
http://www.carrona.org/dvrref.html#nusb3xhc.sys
http://www.carrona.org/dvrref.html#atikmpag.sys
http://www.carrona.org/dvrref.html#Rt64win7.sys
http://www.carrona.org/dvrref.html#AtihdW76.sys
http://www.carrona.org/dvrref.html#hamachi.sys
http://www.carrona.org/dvrref.html#mcdbus.sys
http://www.carrona.org/dvrref.html#nusb3hub.sys
http://www.carrona.org/dvrref.html#epfwwfpr.sys
http://www.carrona.org/dvrref.html#point64.sys
http://www.carrona.org/dvrref.html#RTKVHD64.sys
http://www.carrona.org/dvrref.html#rtkio.sys


BSOD BUGCHECK SUMMARY

Code:

Built by: 7601.1751... Read more

http://www.sevenforums.com/bsod-help-support/155296-faulty-graphics-card-replaced-still-getting-bsod.html
Relevancy 46.87%

Hi guys First post here as I've looked driver kernal stack on BSOD Error: the Faulty on the internet for a couple BSOD Error: Faulty driver on the kernal stack of weeks now and not found a definitive solution to my problem About a month ago I was having problems with my drivers whereby I was crashing in games and sometimes even browsing the internet with a couple of tabs The game would freeze up and then the graphics card would restore itself but crash the game This was usually followed by the blue screen error I am getting now BSOD Error: Faulty driver on the kernal stack soon afterwards I have done a fresh reinstall of Windows and it has been working fine up until two weeks ago whereby I get sporadic blue screens that occur whether I am on a game have Chrome open or if I'm literally just sitting on my desktop doing nothing So far I have tried disabling and deleting the currents settings for the Driver Verifier but has done nothing I am open to any suggestions or ways around this As a side note sometimes when I blue screen my computer will reboot but the monitor will not load up properly I am forced to manually switch off the computer unplug the cable and hold the power button down for a while before plugging it back in and booting it up again however this only happens half of the time I have no idea what causes this Thanks -As a side note if there are any files that I need to attach I should be able to provide them I have attempted to attach one of my crash dumps to this post but cannot get permission to access it even after changing the permissions under its properties Please note that I am by no means an expert with computers so if any technical jargon could be put into simplified terms that would be very much appreciated Thanks again

A:BSOD Error: Faulty driver on the kernal stack

Post it following the Blue Screen of Death (BSOD) Posting Instructions.

http://www.sevenforums.com/bsod-help-support/290643-bsod-error-faulty-driver-kernal-stack.html
Relevancy 46.87%

Hello anyone who can help me.

This week i started getting these and they are sporadic, sometimes happening frequently almost as soon as windows appears. I have used driver sweeper to clean all drivers and this helped for a while. I have now tried to use combofix but this causes the BSOD every time without fail. I have scanned with AVG and Microsoft Essentials and they come up clean, have scanned from both in safe mode and they identified and cleaned a few things but didnt stop the problem. Relevant files are attached, if anyone has some advice it would be much appreciated.

A:BSOD- need to replace faulty driver on kernel stack

  
Quote: Originally Posted by CoalMarx


Hello anyone who can help me.

This week i started getting these and they are sporadic, sometimes happening frequently almost as soon as windows appears. I have used driver sweeper to clean all drivers and this helped for a while. I have now tried to use combofix but this causes the BSOD every time without fail. I have scanned with AVG and Microsoft Essentials and they come up clean, have scanned from both in safe mode and they identified and cleaned a few things but didnt stop the problem. Relevant files are attached, if anyone has some advice it would be much appreciated.


Driver verified your AVG is the cause. Remove and replave with Microsoft Security essentials

AVG - PC TuneUp 2011 | Registry Cleaner, File Recovery, Internet Accelerator
or
AVG Removal Tool
Virus, Spyware & Malware Protection | Microsoft Security Essentials


Code:

Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\K\Desktop\Windows_NT6_BSOD_jcgriff2\061611-24882-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*C:\Symbols*http://msdl.microsoft.com/download/symbols;srv*e:\symbols
*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (3 procs) Free x86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7601.17592.x86fre.win7sp1_gdr.110408-1631
Machine Name:
Kernel base = 0x82a15000 PsLoadedModuleList = 0x82b5e4d0
Debug session time: Thu Jun 16 13:46:27.569 2011 (GMT-4)
System Uptime: 0 days 0:01:05.036
Loading Kernel Symbols
...............................................................
................................................................
...............................
Loading User Symbols
Loading unloaded module list
....
2: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

DRIVER_VERIFIER_DETECTED_VIOLATION (c4)
A device driver attempting to corrupt the system has been caught. This is
because the driver was specified in the registry as being suspect (by the
administrator) and the kernel has enabled substantial checking of this driver.
If the driver attempts to corrupt the system, bugchecks 0xC4, 0xC1 and 0xA will
be among the most commonly seen crashes.
Arguments:
Arg1: 00000000, caller is trying to allocate zero bytes
Arg2: 00000000, current IRQL
Arg3: 00000000, pool type
Arg4: 00000000, number of bytes

Debugging Details:
------------------

Unable to load image \SystemRoot\system32\DRIVERS\avgtdix.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for avgtdix.sys
*** ERROR: Module load completed but symbols could not be loaded for avgtdix.sys

BUGCHECK_STR: 0xc4_0

CURRENT_IRQL: 0

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VERIFIER_ENABLED_VISTA_MINIDUMP

PROCESS_NAME: avgnsx.exe

LAST_CONTROL_TRANSFER: from 82d4bf1f to 82af3f2c

STACK_TEXT:
b74d7a10 82d4bf1f 000000c4 00000000 00000000 nt!KeBugCheckEx+0x1e
b74d7a30 82d5ba31 00000000 00000000 00000001 nt!VerifierBugCheckIfAppropriate+0x30
b74d7a48 82d47b7b 00000080 00000000 b74d7a8c nt!ExAllocatePoolSanityChecks+0xb2
b74d7a7c 82d4774f 00000080 00000000 f24b5357 nt!VeAllocatePoolWithTagPriority+0x68
b74d7a98 8f2f65d0 00000000 00000000 f24b5357 nt!VerifierExAllocatePoolWithTag+0x1e
b74d7ad4 8f242156 ac3d2f68 ad014f68 00000020 afd!WskTdiEHReceive+0xb3
WARNING: Stack unwind information not available. Following frames may be wrong.
b74d7b20 8f2422eb b9538f48 ad02cf30 00000000... Read more

http://www.sevenforums.com/bsod-help-support/170190-bsod-need-replace-faulty-driver-kernel-stack.html
Relevancy 46.87%

Hi I was playing Skyrim last weekend and the game froze on a black screen just graphics playing Skyrim after faulty card? - BSOD as it was cutting to a kill animation I had to restart the computer but when Windows loaded I had a BSOD after playing Skyrim - faulty graphics card? BSOD The computer booted fine BSOD after playing Skyrim - faulty graphics card? up till this point I've been looking up causes and fixes all week and the dump files seem to suggest a x Video TDR error I've attached all the requested information I've already tried installing several different graphics drivers - the newest the one supplied with the card and one between Windows and DirectX were fully up to date I've also tried formatting the hard drive and installing Windows fresh twice I've had the computer back to the state it arrived in when the drivers worked fine and I've tried it with only the video drivers installed Everything I try now is still resulting in the same BSOD I can only get Windows to load in Safe Mode or if I go into Device Manager and disable my graphics card I am now fairly convinced the card itself is the problem and I'm looking for confirmation before I go and get a new one fitted My spec is AMD Phenom II X GHz ASUS M A TD motherboard GB RAM ATI Radeon HD GB Windows Ultimate bit W PSU The computer was new at the end of November I had the same Windows install since then but now I'm running a fresh install Any extra information needed please ask Thanks in advance

A:BSOD after playing Skyrim - faulty graphics card?

To check the graphics card and your hardware:If you are overclocking any hardware, please stop.

Monitor temperatures during the following tests. Use the following programs to monitor the temperatures. Real Temp is a good CPU temperature monitor.
Speccy - System Information - Free Download will monitor all hardware temperatures.
HWiNFO, HWiNFO32 & HWiNFO64 - Hardware Information and Analysis Tools can be inaccurate for CPU temperatures, but is a good program for GPU temperature monitoring.
Use FurMark: VGA Stress Test, Graphics Card and GPU Stability Test, Burn-in Test, OpenGL Benchmark and GPU Temperature | oZone3D.Net to test the graphics card GPU. Let it run until the GPU temperatures even out or until the GPU temperatures reach a dangerous level (you can find the max temperature for your card on either the nVidia or AMD sites; if you are not sure, ask us). The goal is to get a steady temperature, find out if the GPU is overheating, or to see if there are any artifacts present in the test itself: look for strange pixelated patterns on the screen or colors that do not look like they belong. Then use the |MG| Video Memory Stress Test 1.7.116 Download to test your graphics card memory. Let the memory test run for at least seven passes; the more the better.

Run Hardware - Stress Test With Prime95 to determine any hardware problems. Run all three tests for a few hours each. If you get errors, stop the test and post back here.

Follow the steps for doing CPU stress test using IntelBurnTest

Run the boot version of Memtest86+ paying close attention to Parts 2 and 3 of the tutorial. Also, in case Memtest86+ misses anything and comes up with no errors, run the extended version of the Windows Memory Diagnostics Tool for at least five passes. These you may want to run overnight since they take a long time to complete (run them an hour before bed each of the next two nights and check before going to sleep that they are still running).



   Warning
Before you proceed with the following, answer these two questions: Are you still under warranty? Does your warranty allow you to open up the machine to check hardware? If you are unsure of the answers to these questions, contact your system manufacturer. WARNING: The steps that follow can void your warranty!!!
For Part 3: If You Have Errors: If you swap any memory components, follow these steps for ESD safety:Shut down and turn off your computer.
Unplug all power supplies to the computer (AC Power then battery for laptops, AC power for desktops)
Hold down the power button for 30 seconds to close the circuit and ensure all power drains from components.
Make sure you are grounded by using proper grounding techniques, i.e. work on an anti-static workbench, anti-static desk, or an anti-static pad. Hold something metallic while touching it to the anti-static surface, or use an anti-static wristband to attach to the anti-static material while working. If you do not have an anti-static workbench, desk, or pad, you can use your computer tower/case by finding a metal hold in it, such as a drive bay.
Once these steps have been followed, it is safe to remove and replace components within your computer.
Also, STOP 0x116: VIDEO_TDR_ERROR troubleshooting

And make sure the system has good airflow and the graphics card does not have dust built up in the fans. Also check that no power cables are blocking the graphics card fan from spinning.

http://www.sevenforums.com/bsod-help-support/234485-bsod-after-playing-skyrim-faulty-graphics-card.html
Relevancy 46.87%

I am having bsod problems and the problem of the bsod is FAULTY HARDWARE CORRUPTED PAGE. I did a restore factory settings from the windows 10 options like 1 month ago. After I got the bsod , I ran a malwarebytes full scan and no threats detected. So far I gotten 4 bsods.
Ram 6GB Graphics Card Nvidia GTX 960 Processor AMD FX 6100 SIX CORE 1TB HDD and 500GB HDD Windows 10 Pro 64 BIT

http://www.tenforums.com/bsod-crashes-debugging/57102-bsod-problem-faulty-hardware-corrupted-page.html
Relevancy 46.87%

Hi

For about a week now I can't turn my computer off, it will get as far as saying shutting down (after logging off) then crashes with the message

Faulty driver on the kernal stack must be replaced with a working version

It seems to have started around the time it did a windows update but I also reinstalled Itunes around the same sort of time

My computer was built for me last aug and the specs are:

windows 7 home premium 64bit
4gb ram
AMD Athlon II x2 260 processor 3.20ghz
NVIDIA GeForce GT 520 1gb
Board: ECS MCP61M-M3 7.0, Bus Clock: 200 megahertz
BIOS: American Megatrends Inc. 080015 11/03/2010
Hard drive - Hitachi HDS5C1010CLA SCSI Disk Device (1000.20 GB)
Kaspersky Internet security

I have attached the files from the minidump and system health report

I do have the problem with NVIDIA drivers where they constantly crash although I don't remember that happening since I got the BSOD problem

A:BSOD Faulty driver on the kernal stack must be replaced

Please can anyone help?

http://www.sevenforums.com/bsod-help-support/224848-bsod-faulty-driver-kernal-stack-must-replaced.html
Relevancy 46.87%

I am currently building a new 3 4 wire wire fans vs. machine with P ghz I ve read several times that Prescott core cpus like the Intel run very hot and that the OEM heat sink stinks I have decided that the D rocket cooler from GigaByte which got rave reviews everywhere for effectiveness and quiet would be the best solution My board is the newest mean machine from Foxconn the XE AA- EKRS and uses a pin cpu fan header as the OEM fan from Intel uses a pin plug The th pin 3 wire vs. 4 wire fans is PWM pulse width modulation signal to the fan for 3 wire vs. 4 wire fans variable speed control The GigaByte fan does NOT have the th pin Will Intel 3 wire vs. 4 wire fans s on chip thermoster still operate the fan in a variable speed mode normally without the use of the PWM pin Is there something in BIOS I need to set to ensure this Just don t want to waste my money on a turbo performing cooler if it s stuck running on only one speed nbsp

https://forums.techguy.org/threads/3-wire-vs-4-wire-fans.354346/
Relevancy 46.87%

Hi Hope someone can help.

I have board SOYO K7VTA PRO motherboard. It has a four pins on the board where you can put a four-pin speaker. I have a two-pin speaker. Is there anything I can do to convert the two-pin to four-pin.

And what's the difference between the two anyway?

Thanks,
Jonathan
 

A:PC speaker 2 wire / 4 wire

If you are talking about hooking up the case speaker to the motherboard then there is no difference. The regular (four pin plug) just uses two of the pins anyway. You can try cutting your plug in two and just connecting the two pins where they need to go on the system board connections.
 

https://forums.techguy.org/threads/pc-speaker-2-wire-4-wire.359725/
Relevancy 46.44%

Hello Everybody Sorry for this being long but it should cover everything See attached for BSOD zip files I have a Windows Bit Toshiba Satellite A Laptop Basic specs are a GB Toshiba Hard drive GB of Ram Intel Core Duo P CPU Insyde H Version Bios and a NVIDIA GeForce GT M graphics card I use Avast Antivirus Free Zone Alarm Firewall and Windows Defender for security For the past months i have been getting random BSODs It started as once in a while but it started to get frequent as the months passed I would get - BSODs on cold start while windows is loading before logging coming hardware faulty problems a piece BSOD of A range of from into it and then the system would run ok A range of BSOD problems coming from a faulty piece of hardware for about a - hrs and then BSODs again I enabled boot logging to figure out the startup BSODs and i found that some of the errors were caused by the driver intelppm sys I disabled the driver and it ran ok for about months but then more random BSODs If i enable intelppm sys BSODs get worse so it is disabled for now Symptoms I would have to keep turning the power switch on off - times since it gets stuck on POST on cold start When I get past this I would have to leave the computer on the BIOS menu or Windows Startup options menu for about - minutes to warm the computer where I could then proceed to windows On cold start it restarts - times while windows is loading or even if I do reach windows i would get a random BSOD By this time the computer gets warm so I would not have this particular problem until the next cold start When I am on Windows I may not have problems for - hrs then I would get some random programs crashing like Google Chrome Firefox Flash Player While on YouTube Microsoft Word and Windows Media Player while i m using it This would then graduate to BSODs Computer hangs after waking from sleep mode BSODs from a cold start hibernation The audio driver crashes once in a while when playing audio where I would have to go to device manager to disable and enable it to run again Windows Explorer tends to malfunction causing some graphics distortions where I would be forced to restart My synaptics touchpad seems to malfunction occasionally BSODs while logged on to windows tends to happen often while I am connected to the internet It triggers a lot while using Google Chrome Offline it may trigger while using Windows Media Player or even on idle - maybe a background program initiates triggering a BSOD Would get a random restart on Safe Mode Updates amp Tests That I Ran Have the latest Windows updates and all drivers including the BIOS are updated My processor runs on temperatures between - degrees Celcius On intel s website the processor s maximum temperature is degrees so I am in the safe range Ran Antivirus and Malware scan which are all updated no problems Did a fresh clean install of Windows same problems Prime Ran for a few hrs no problems OCCT No problems Windows Memory Test No Problems Memtest Ran for hrs no problems Windows Chekdisk No errors Seatools for Windows All passed Ran Driver Verifier No problems Disabled several drivers including Audio Video and Wireless drivers Same problems but less frequent as this time I would not be online DPC Latency Checker High latency on wireless card Realtek RTL SE n PCI-E NIC which causes popping noises and delays when playing audio This happens especially while browsing the web No problems with this card otherwise Suspects CPU I have a strong feeling this is the culprit I figure a bad CPU would hang a computer on POST the processor have to warm up to work and i guess any programs that are CPU intensive such as Google Chrome would cause a BSOD All this and yet it passes stress tests PSU I never tested the PSU and i am aware that a faulty PSU can cause all kinds of errors mentioned above including a malfunctioning CPU I am planning to switch to another CPU If this fails the PSU is next Display Card I doubt it but right now the NVIDIA display card is... Read more

A:A range of BSOD problems coming from a faulty piece of hardware

I believe you are right in suspecting a bad cpu as a possible culprit because if memory serves correct; if and when a cpu starts failing; it will generate quite a few bsod's like the ones you have uploaded because its the processor which is the main heart of the system other than the system board. I would definitely switch out cpu's if you know how to do it carefully. And yes after that definitely test the psu.

http://www.sevenforums.com/bsod-help-support/318782-range-bsod-problems-coming-faulty-piece-hardware.html
Relevancy 45.58%

My computer has gotten BSOD due to driver power state failure twice now, both once the computer has already been up and running. This isn't a problem I know what to do with or about, so I'm hoping someone who knows more in this area will be able to help me through the process of fixing the problem. Thanks in advance!

A:Just started getting BSOD

I ran the Windows Problem Reporting check once I got my computer up and running and this is what it said about the BSOD:

Windows
Problem: Shut down unexpectedly
Files that help describe the problem:
031213-30420-01.dmp
sysdata.xml
WERInternalMetadata.xml
View a temporary copy of these files
Warning: If a virus or other security threat caused the problem, opening a copy of the files could harm your computer.

http://www.techsupportforum.com/forums/f299/just-started-getting-bsod-689508.html
Relevancy 45.58%

I got this computer a few months ago August and it s been working very smoothly however tonight as I was using it started Just BSOD getting the computer pretty much stopped functionally working and I tried to power it off using the start options but the comp wouldn t respond so I had to physically turn it off Tried Just started getting BSOD turning it back on normally it was on the login background screen without the actual login prompt for or so minutes then displayed the login screen for a second before an error message and BSOD I didn t get a chance to take down what the error was the first time so I rebooted the computer to not automatically close on system failure but the BSOD this time only said ------------------------------------- STOP c a Fatal System Error The windows SubSystem system process terminated unexpectedly with a status of x c xfd fc x e The system has been shut down ------------------------------------- I haven t had big problems with viruses about a month back I had to remove a program that just changed my home page on browsers to a bad search client but I haven t found or encountered any problems since The computer is a refurbished Lenovo ideapad Z The computer boots fine in safe mode and safe mode with networking and now boots slowly but doesn t error and crash until the login prompt shows up All help is appreciated Edit On boot up I tried to do built in quot Repair quot option and did the option to scan for windows start up issues Test said I had no boot up issues and it indicated that windows was starting up fine

A:Just started getting BSOD

Boot into Safe Mode and do a System Restore.

Click on the Start button, type in System Restore in the search box, in the list of results click on System Restore. You will want a restore point prior to the start of this problem.

http://www.bleepingcomputer.com/forums/t/476015/just-started-getting-bsod/
Relevancy 45.58%

Hello I am running windows and I have started getting the blue screen of death and need some help fixing the issues I know some like to see only the part of help BSoD I have need getting some started the report that shows issue while others like I have started getting BSoD need some help the entire report Here is a diagnostic report Diagnostics Report v Version Date ---------------------------------- - Operating System ---------------------------------- - Operating System Windows Home Premium -bit Build Service Pack win sp gdr - - Language English Regional Setting English - BIOS BIOS Date Ver - I have started getting BSoD need some help Processor Intel reg Core i - CPU GHz CPUs GHz - Memory MB RAM - Available OS Memory MB RAM - Page File MB used MB available - Windows Dir C Windows - DirectX Version DirectX - DX Setup Parameters Not found - User DPI Setting Using System DPI - System DPI Setting DPI percent - DWM DPI Scaling Disabled - DxDiag Version ---------------------------------- - Processor ---------------------------------- - Caption Intel reg Core i - CPU GHz x MHz - Current Clock Speed MHz - L -Cache KB - L -Cache MB - L -Cache MB ---------------------------------- - Video Adapter ---------------------------------- - Card Name AMD Radeon HD Series - Manufacturer Advanced Micro Devices Inc - Chip Type ATI display adapter x - DAC Type Internal DAC MHz - Device Key Enum PCI VEN amp DEV amp SUBSYS amp REV - Display Memory MB - AdapterRAM GB - Current Mode x bit Hz - Monitor Name Generic PnP Monitor - Driver Name aticfx dll aticfx dll aticfx dll aticfx aticfx aticfx atiumd dll atidxx dll atidxx dll atiumdag atidxx atidxx atiumdva atiumd a cap atitmm dll - Driver Version - Driver Language English - DDI Version - Driver Model WDDM - Driver Beta False - Driver Debug False - Driver Date - Driver Size - VDD n a - Mini VDD n a - Mini VDD Date n a - Mini VDD Size - Device Identifier D B EE - - CF- - D BEC C - Vendor ID x - Device ID x - SubSys ID x - Revision ID x - Driver Strong Name oem inf ATI Mfg NTamd ati mtag NI pci ven amp dev - Rank Of Driver E - Video Accel ModeMPEG A ModeMPEG C - Deinterlace Caps E FF-B - B-BCF -BCB E F Format In Out YUY YUY Frames Prev Fwd Back Caps VideoProcess YUV RGB VideoProcess StretchX VideoProcess StretchY DeinterlaceTech PixelAdaptive AA E- - A - C - F FAF E E Format In Out YUY YUY Frames Prev Fwd Back Caps VideoProcess YUV RGB VideoProcess StretchX VideoProcess StretchY DeinterlaceTech BOBVerticalStretch A A C -C EC- BD - EDE-F C DC B Format In Out YUY YUY Frames Prev Fwd Back Caps VideoProcess YUV RGB VideoProcess StretchX VideoProcess StretchY E FF-B - B-BCF -BCB E F Format In Out UYVY UYVY Frames Prev Fwd Back Caps VideoProcess YUV RGB VideoProcess StretchX VideoProcess StretchY DeinterlaceTech PixelAdaptive AA E- - A - C - F FAF E E Format In Out UYVY UYVY Frames Prev Fwd Back Caps VideoProcess YUV RGB VideoProcess StretchX VideoProcess StretchY DeinterlaceTech BOBVerticalStretch A A C -C EC- BD - EDE-F C DC B Format In Out UYVY UYVY Frames Prev Fwd Back Caps VideoProcess YUV RGB VideoProcess StretchX VideoProcess StretchY A A C -C EC- BD - EDE-F C DC B Format In Out YV x Frames Prev Fwd Back Caps C C - FB - F - - BF EE D Format In Out NV x e Frames Prev Fwd Back Caps VideoProcess YUV RGB VideoProcess StretchX VideoProcess StretchY DeinterlaceTech PixelAdaptive C DAD-CCBC- B- C - CF F A Format In Out NV x e Frames Prev Fwd Back Caps VideoProcess YUV RGB VideoProcess StretchX VideoProcess StretchY DeinterlaceTech PixelAdaptive E FF-B - B-BCF -BCB E F Format In Out NV x e Frames Prev Fwd Back Caps VideoProcess YUV RGB VideoProcess StretchX VideoProcess StretchY DeinterlaceTech PixelAdaptive AA E- - A - C - F FAF E E Format In Out NV x e Frames Prev Fwd Back Caps VideoProcess YUV RGB VideoProcess StretchX VideoProcess StretchY DeinterlaceTech BOBVerticalStretch A A C -C EC- BD - EDE-F C DC B Format In Out NV x e Frames Prev Fwd Back Caps VideoProcess YUV RGB VideoProcess StretchX VideoProcess ... Read more

A:I have started getting BSoD need some help

FIRST ........ that isnt a diag repot that is a hardware spec ......... I need to know what the blue screen error code is ......if it flashes to fast .... on power up of the system hit and keep tapping the f8 until the safemode promt comes up and in the list there is an option the disable system reboot on failure select that and let the computer boot up when it blue screens it will stay on so you can get the info.... what im looking for is about 2/3 down the page you eill see something lik 000x00000xxx its the last xxx that i need to know

http://www.bleepingcomputer.com/forums/t/480159/i-have-started-getting-bsod-need-some-help/
Relevancy 45.58%

Good Morning I'm having a problem that has me temporarily stumped Here's the background Computer Specs Gateway desktop GM about years BSOD-Just started old Processor Intel Core Quad BSOD-Just started Core with VT Chip set Intel G Memory gigs Hard drive Video Card NVIDIA GeForce GT Mb On the rd I started getting the BSOD when I booted up I booted to safe mode and then restarted and the pc came up and working all day While it was working I did some research on BSOD I found a program that would de-code the mini dump and some tips on things that could be wrong Since then every morning when I boot up I get a BSOD I boot to safe mode and reboot and the pc come up and works all day I'm thinking it could be either my WD external hard drive or I just got an Ipod and and installed Itune on the th of Aug could there be a conflict Below are the mini-dumps I've received Dump File BSOD-Just started Mini - dmp Crash Time AM Bug Check String DRIVER CORRUPTED EXPOOL Bug Check Code x c Parameter x Parameter x Parameter x Parameter x a Caused By Driver Camd BSOD-Just started a SYS Caused By Address Camd a SYS f d File Description Universal Serial Bus Camera Driver Product Name Company File Version Processor -bit Computer Name Full Path C Windows Minidump Mini - dmp Processors Count Major Version Minor Version Dump File Mini - dmp Crash Time PM Bug Check String BUGCODE USB DRIVER Bug Check Code x fe Parameter x Parameter x be Parameter x Parameter x Caused By Driver USBPORT SYS Caused By Address USBPORT SYS File Description USB amp Port Driver Product Name Microsoft Windows Operating System Company Microsoft Corporation File Version lh sp rtm - Processor -bit Computer Name Full Path C Windows Minidump Mini - dmp Processors Count Major Version Minor Version Dump File Mini - dmp Crash Time AM Bug Check String DRIVER IRQL NOT LESS OR EQUAL Bug Check Code x d Parameter x Parameter x b Parameter x Parameter x Caused By Driver ntkrnlpa exe Caused By Address ntkrnlpa exe dfd File Description NT Kernel amp System Product Name Microsoft Windows Operating System Company Microsoft Corporation File Version vistasp gdr - Processor -bit Computer Name Full Path C Windows Minidump Mini - dmp Processors Count Major Version Minor Version Dump File Mini - dmp Crash Time AM Bug Check String IRQL NOT LESS OR EQUAL Bug Check Code x a Parameter x Parameter x Parameter x Parameter x fe Caused By Driver hal dll Caused By Address hal dll fe File Description Hardware Abstraction Layer DLL Product Name Microsoft Windows Operating System Company Microsoft Corporation File Version lh sp rtm - Processor -bit Computer Name Full Path C Windows Minidump Mini - dmp Processors Count Major Version Minor Version I'm confused as where to go from here Any suggestions

A:BSOD-Just started

Hello and welcome to Bleepingcomputer.

Your first blue screen is related to a USB web cam driver.

Caused By Driver : Camd931a.SYS
Caused By Address : Camd931a.SYS+4f0d
File Description : Universal Serial Bus Camera Driver

Your second is related to your USB web cam again.

Bug Check String : BUGCODE_USB_DRIVER
Caused By Driver : USBPORT.SYS
Caused By Address : USBPORT.SYS+1025
File Description : USB 1.1 & 2.0 Port Driver

I believe you have a USB web cam driver which needs to be updated.
What brand of web cam do you have?

Bruce.

http://www.bleepingcomputer.com/forums/t/342988/bsod-just-started/
Relevancy 45.58%

I'm getting BSOD with this error:

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.48
Locale ID: 1033

Additional information about the problem:
BCCode: 1000007e
BCP1: FFFFFFFFC0000005
BCP2: FFFFF80002C8706E
BCP3: FFFFF88003F0F798
BCP4: FFFFF88003F0F000
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\012611-31496-01.dmp
C:\Users\Cockrell\AppData\Local\Temp\WER-428534-0.sysdata.xml

Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt


Attached are the perfmon and the other report asked for. So far this has only happened when I come back to the PC after several hours. It has not crashed while in use.Thanks in advance.

A:BSOD just started

Hi siampete and Welcome.

All your dump files are returning the same stop error code and they are all pointing towards your pre Windows 7 dated driver iaStor.sys.

STOP 0x0000007E: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED
Usual causes: Insufficient disk space, Device driver, Video card, BIOS, Breakpoint with no debugger attached, Hardware incompatibility, Faulty system service, Memory, 3rd party remote control.


Bugcheck Analysis
Code:
SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M (1000007e)
This is a very common bugcheck. Usually the exception address pinpoints
the driver/function that caused the problem. Always note this address
as well as the link date of the driver/image that contains this address.
Some common problems are exception code 0x80000003. This means a hard
coded breakpoint or assertion was hit, but this system was booted
/NODEBUG. This is not supposed to happen as developers should never have
hardcoded breakpoints in retail code, but ...
If this happens, make sure a debugger gets connected, and the
system is booted /DEBUG. This will let us see why this breakpoint is
happening.
Arguments:
Arg1: ffffffffc0000005, The exception code that was not handled
Arg2: fffff800030d106e, The address that the exception occurred at
Arg3: fffff88003f0f798, Exception Record Address
Arg4: fffff88003f0f000, Context Record Address

Debugging Details:
------------------


EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.

FAULTING_IP:
nt!KeWaitForMultipleObjects+595
fffff800`030d106e 4d895cc3f0 mov qword ptr [r11+rax*8-10h],r11

EXCEPTION_RECORD: fffff88003f0f798 -- (.exr 0xfffff88003f0f798)
ExceptionAddress: fffff800030d106e (nt!KeWaitForMultipleObjects+0x0000000000000595)
ExceptionCode: c0000005 (Access violation)
ExceptionFlags: 00000000
NumberParameters: 2
Parameter[0]: 0000000000000000
Parameter[1]: ffffffffffffffff
Attempt to read from address ffffffffffffffff


CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

PROCESS_NAME: System

CURRENT_IRQL: 2

ERROR_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.

EXCEPTION_PARAMETER1: 0000000000000000

EXCEPTION_PARAMETER2: ffffffffffffffff

READ_ADDRESS: GetPointerFromAddress: unable to read from fffff800033050e0
ffffffffffffffff

FOLLOWUP_IP:
iaStor+49e95
fffff880`01311e95 ?? ???

BUGCHECK_STR: 0x7E

LAST_CONTROL_TRANSFER: from fffff88001311e95 to fffff800030d106e

SYMBOL_STACK_INDEX: 1

SYMBOL_NAME: iaStor+49e95

FOLLOWUP_NAME: MachineOwner

MODULE_NAME: iaStor

IMAGE_NAME: iaStor.sys

DEBUG_FLR_IMAGE_TIMESTAMP: 4a287aa4

STACK_COMMAND: .cxr 0xfffff88003f0f000 ; kb

FAILURE_BUCKET_ID: X64_0x7E_iaStor+49e95

BUCKET_ID: X64_0x7E_iaStor+49e95

Followup: MachineOwner
Outdated Drivers:

iaStor.sys Fri Jun 05 02:53:40 2009 Intel Storage.

iaStorV.sys Wed Apr 08 17:57:17 2009 Intel Matrix Storage Manager

Rt64win7.sys Fri Dec 24 07:30:25 2010 Realtek LAN RTL811 7.037

RTKVHD64.sys Fri Sep 03 09:02:27 2010 Realtek HD Audio 2.56


Drivers:
Code:
fffff880`03f0f9d0 fffff880`01311e95 : fffffa80`00000002 fffff880`03f0fcc0 fffffa80`00000000 fffffa80`00000000 : nt!KeWaitForMultipleObjects+0x595
fffff880`03f0fc80 fffffa80`00000002 : fffff880`03f0fcc0 fffffa80`00000000 fffffa80`00000000 fffffa80`0675d000 : iaStor+0x49e95
fffff880`03f0fc88 fffff880`03f0fcc0 : fffffa80`00000000 fffffa80`00000000 fffffa80`0675d000 fffffa80`0718eb00 : 0xfffffa80`00000002
fffff880`03f0fc90 fffffa80`00000000 : fffffa80`00000000 fffffa80`0675d000 fffffa80`0718eb00 00000000`00000000 : 0xfffff880`03f0fcc0
fffff880`03f0fc98 fffffa80`00000000 : fffffa80`0675d000 fffffa80`0718eb00 00000000`00000000 fffffa80`0718ec68 : 0xfffffa80`00000000
fffff880`03f0fca0 fffffa80`0675d000 : fffffa80`0718eb00 00000000`0000000... Read more

http://www.sevenforums.com/bsod-help-support/140813-bsod-just-started.html
Relevancy 45.58%

Windows XP PRO BSOD cd-rom Need help with started SP- On and - was trying to play a disk in the cd-rom a friend of my wifes BSOD Need help started with cd-rom was trying anyway he couldn t get it to play and it came up BSOD OXOOOOOOA When i look in his event viewer back on - - and - - it show multiple times of cd-rom event I looked it up and it says the ribbon is bad and need to be changed I tried to start it up a few times this morning and in the event viewer it show a DCOM error and also a service contrrol manager error and Anyway when i got it last night in normal mode you get the BSOD Everytime I can get into BSOD Need help started with cd-rom safemode so I tried system restore at a command prompt but it says it took it back to the th but didn t fix the problem It is a Panasonic CF- AND IS an BSOD Need help started with cd-rom older laptop Can someone tell me what to do He has no disks for it I have a Windows XP Pro disk but it has I think SP ON IT and his computer has SP- anyway any ideas would be great I disabled the cd-rom to see if that would help but didn t Please any ideas would be much appreciated nbsp

https://forums.techguy.org/threads/bsod-need-help-started-with-cd-rom.1011748/
Relevancy 45.58%

Hi, I have had my computer for about 3 months now, and I have had a few BSOD's in the last few days, and I was wondering if you could help me discover the problem

My specs are:

Windows 7 Ultimate 32bit - not and OEM
CPU = Quad Core AMD Phenom II X4 955 Processor
4GB of RAM
Nvidia GeForce GTX460 SE
500GB SATA HDD

If you need anything else with the spec then let me know

I think I have followed the instuctions on the BSOD help page for uploading the kernal dump files and the system check, which I have attached in the .rar file

Hopefully someone can help, and as I say if you need more information then il try to get back as quick as I can!

Thanks

Ben Docherty

A:Just started getting BSOD's

  
Quote: Originally Posted by Bendocherty


Hi, I have had my computer for about 3 months now, and I have had a few BSOD's in the last few days, and I was wondering if you could help me discover the problem

My specs are:

Windows 7 Ultimate 32bit - not and OEM
CPU = Quad Core AMD Phenom II X4 955 Processor
4GB of RAM
Nvidia GeForce GTX460 SE
500GB SATA HDD

If you need anything else with the spec then let me know

I think I have followed the instuctions on the BSOD help page for uploading the kernal dump files and the system check, which I have attached in the .rar file

Hopefully someone can help, and as I say if you need more information then il try to get back as quick as I can!

Thanks

Ben Docherty


Ben

two problems

1-ASACPI.SYS a major cause of BSOD's in the 2005 and earlier rev.

The pre 2009 version of this driver is a known BSOD cause.

The pre 2009 versions of this driver is a known BSOD cause.
Please visit this link: ASUS teK Computer Inc. -Support- Drivers and Download P7P55D LE
ASUSTeK Computer Inc. -Support- Drivers and Download P7P55D LE

Scroll down to the Utilities category, then scroll down to the "ATK0110 driver for WindowsXP/Vista/Windows 7 32&64-bit" (it's about the 12th item down).
Download and install it.
Go to C:\Windows\System32\drivers to check and make sure that the ASACPI.sys file is date stamped from 2009 or 2010 (NOT 2005 or 4).

2-Your Atheros wifi driver. Re-install with newest.

http://www.sevenforums.com/bsod-help-support/174016-just-started-getting-bsods.html
Relevancy 45.58%

I've gotten the BSOD twice in the last week, seems to occur at random times. I did just get a new video card and 4 more GBs of RAM about a month ago, but I formatted and got all the correct and up to date drivers installed. Other than that, there have been no changes in my computer. The two .dmp files for the two crashes are attached, any help is much appreciated.
 

A:BSOD just started

Test the hard drive by going to Computer, right-click on the C drive. Select Properties, Tools, Check Now. Put a check mark in both boxes to set a disk check on the next start up
 

http://www.techspot.com/community/topics/bsod-just-started.207964/
Relevancy 45.58%

A problem has been detected and windows has been shut down to prevent damage to your computer.

IRQL_NOT_LESS_OR_EQUAL

If this is the first time you've seen this Stop error screen, restart your computer. If this screen appears again, follow these steps:

Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer for any windows updates you might need.
If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing.
If you need to use Safe Mode to remove or disable components, restart your compute, press F8 to select Advanced Startup Options, and then select Safe Mode.

Technical Information:

*** STOP: 0x0000000A (0xE3181183,0x00000002,0x00000000,0x8A93AB24)

A:Started PC, BSOD.

Can you post the dump files by following the Blue Screen of Death (BSOD) Posting Instructions

http://www.sevenforums.com/bsod-help-support/326655-started-pc-bsod.html
Relevancy 45.58%

I have been BSODing periodically for the last couple of weeks and I notice it usually happens when I play games. Some of them are IRQL Not less or equal and others are simply System Service Exception. All help is appreciated.

http://www.tenforums.com/bsod-crashes-debugging/55272-bsod-just-started-out-nowhere.html
Relevancy 45.58%

SO i have built my PC around 3 months ago and well. Its having trouble booting it wont let me do anything i bott it and when it boots up and everything i get BSOD. this is the error i get

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.3.0.256.1
Locale ID: 1033

Additional information about the problem:
BCCode: a
BCP1: 0000000000000008
BCP2: 0000000000000002
BCP3: 0000000000000001
BCP4: FFFFF800032AF44B
OS Version: 6_1_7600
Service Pack: 3_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\012811-29764-01.dmp
C:\Windows\Temp\WER-37705-0.sysdata.xml

Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

I added the dump files for you to anylyze it.

I have updated all my drivers and my bios and still get BSOD.
Please Help! ASAP

A:just started getting BSOD on my PC

Hi Japjeev.

STOP 0x0000000A: IRQL_NOT_LESS_OR_EQUAL
Usual causes: Kernel mode driver, System Service, BIOS, Windows, Virus scanner, Backup tool, compatibility
Your dump file blames ntkrnlmp.exe which is a Windows System file and is highly unlikely to be the cause.
Old and incompatible drives can and do cause issues with Windows 7.

As a Priority:

ASACPI.sys Mon Mar 28 03:30:36 2005 This driver is notorious for causing BSOD's. Asus ATK0110 driver. Look under the sub-heading: Utilities. Roughly 12th one down.

The sptd.sys driver is notorious for causing BSOD's with Windows 7. It's used by Daemon Tools /Alcohol 120 which will also have to be uninstalled.
Then use the correct (either 32bit or 64bit) download from Duplex Secure to uninstall the sPTD driver.
Make sure to select uninstall!
Virtual Drives
Some alternatives to DT/Alcohol that do not use SPTD.SYS
DVDFab
MagicDisc
PowerISO (The program is a trial but the drive emulation is free forever).

Outdated Drivers. Update:

Rt64win7.sys Thu Aug 20 17:05:06 2009 Realtek LAN RTL81xx 7.037

Bugcheck Analysis
Code:
Loading Dump File [D:\ DOWNLOADS\ DUMPS\Japjeev\My Dump files\012811-29764-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*C:\XSymCache*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 (Service Pack 3) MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Machine Name:
Kernel base = 0xfffff800`0321f000 PsLoadedModuleList = 0xfffff800`0345ce50
Debug session time: Fri Jan 28 19:23:59.390 2011 (UTC + 0:00)
System Uptime: 0 days 0:00:50.950
Loading Kernel Symbols
...............................................................
................................................................
...............
Loading User Symbols
Loading unloaded module list
.....
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck A, {8, 2, 1, fffff800032af44b}

Probably caused by : ntkrnlmp.exe ( nt!KiPageFault+260 )

Followup: MachineOwner
---------

2: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

IRQL_NOT_LESS_OR_EQUAL (a)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high. This is usually
caused by drivers using improper addresses.
If a kernel debugger is available get the stack backtrace.
Arguments:
Arg1: 0000000000000008, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000001, bitfield :
bit 0 : value 0 = read operation, 1 = write operation
bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: fffff800032af44b, address which referenced memory

Debugging Details:
------------------
WRITE_ADDRESS: GetPointerFromAddress: unable to read from fffff800034c70e0
0000000000000008

CURRENT_IRQL: 2

FAULTING_IP:
nt!IopCompleteRequest+c88
fffff800`032af44b 48894108 mov qword ptr [rcx+8],rax

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

BUGCHECK_STR: 0xA

PROCESS_NAME: WerFault.exe

IRP_ADDRESS: ffffffffffffff88

TRAP_FRAME: fffff8800... Read more

http://www.sevenforums.com/bsod-help-support/140951-just-started-getting-bsod-my-pc.html
Relevancy 45.58%

Hi This has just started happening very recently I have a month old PC I have not had a problem until recently when I had a black screen freeze with a noise like a repetitive stuck noise and I had to hold the power button down to reset the PC It came back tonight again I have attached the requested info below if someone could take a look it would be greatly appreciated P S System specs are filled out on link below and link to x Dump files via SkyDrive https onedrive live com cid F D BA This has happened more times since this post and I cannot figure out why I haven't made any major changes to my PC in a while hardware or programs I BSOD 116 just started have the latest Nvidia drivers I have the latest Sound drivers Everything else I keep up to date and patched as quick as I can I know related BSOD 116 just started to graphics usually so I am pushing my graphics card to test it but it crashes in games and out of games just browsing the internet so it's hard to pinpoint the cause

A:BSOD 116 just started

Hi ProdigyGamer.

A stop 0x116 is a display/graphics related issue.

Stress test the Graphics Card using Furmark.
Video Card - Stress Test with Furmark
Run Furmark on both the GPU, one by one.

Check if the Power Supply Unit (PSU) supplying adequate power to the computer or not.
eXtreme Power Supply Calculator
Also let us know the wattage of the computer. It must be sufficient as I guess, still.

Is the computer hot? Report us the heat of the computer after a couple of hours of your normal usage. Upload a screenshot of the summery tab of Speccy. Alternatively, you can publish a Speccy snapshot too: Speccy - Publish Snapshot of your System Specs .

Install the NVIDIA DRIVERS 314.22WHQL only, at least as a test about how the computer is running with this driver. This test is needed to determine whether it is a hardware or a software related issue.
Uninstall All nvidia items in Control Panel > Programs and features3D Vision Control Driver
3D Vision Driver
Graphics Driver
HD Audio Driver
PhysX
nvidia Update
(Are you using nvidia chipset drivers? If so, dont uninstall anything other than those are listed).
Now follow Drivers - Clean Left over Files after Uninstalling
Download 314.22 WHQL. While installing, Select Custom (Advanced) install. In the next page, follow this settings:
Let us know the results.
______________________________________

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 116, {fffffa8023cc9010, fffff8801029ce2c, ffffffffc000009a, 4}

Unable to load image nvlddmkm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
Probably caused by : nvlddmkm.sys ( nvlddmkm+9bbe2c )

Followup: MachineOwner
---------

11: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

VIDEO_TDR_FAILURE (116)
Attempt to reset the display driver and recover from timeout failed.
Arguments:
Arg1: fffffa8023cc9010, Optional pointer to internal TDR recovery context (TDR_RECOVERY_CONTEXT).
Arg2: fffff8801029ce2c, The pointer into responsible device driver module (e.g. owner tag).
Arg3: ffffffffc000009a, Optional error code (NTSTATUS) of the last failed operation.
Arg4: 0000000000000004, Optional internal context dependent data.

Debugging Details:
------------------
FAULTING_IP:
nvlddmkm+9bbe2c
fffff880`1029ce2c ?? ???

DEFAULT_BUCKET_ID: GRAPHICS_DRIVER_TDR_FAULT

CUSTOMER_CRASH_COUNT: 1

BUGCHECK_STR: 0x116

PROCESS_NAME: System

CURRENT_IRQL: 0

ANALYSIS_VERSION: 6.3.9600.16384 (debuggers(dbg).130821-1623) amd64fre

STACK_TEXT:
fffff880`0416ea48 fffff880`058f8140 : 00000000`00000116 fffffa80`23cc9010 fffff880`1029ce2c ffffffff`c000009a : nt!KeBugCheckEx
fffff880`0416ea50 fffff880`058cb867 : fffff880`1029ce2c fffffa80`24cc3000 00000000`00000000 ffffffff`c000009a : dxgkrnl!TdrBugcheckOnTimeout+0xec
fffff880`0416ea90 fffff880`058f7f4f : fffffa80`ffffd84d ffffffff`fffe7960 fffffa80`23cc9010 00000000`00000000 : dxgkrnl!DXGADAPTER::Reset+0x2a3
fffff880`0416eb40 fffff880`059c703d : fffffa80`23d9a740 00000000`00000080 00000000`00000000 fffffa80`24cc2410 : dxgkrnl!TdrResetFromTimeout+0x23
fffff880`0416ebc0 fffff800`033162ea : 000... Read more

http://www.sevenforums.com/bsod-help-support/327579-bsod-116-just-started.html
Relevancy 45.15%

Have a Lenovo T450 with Windows 10.  Its used every day at the office to connect to the wireless network at the office.  We are working remotely today and it will not detect the Verizon wireless Jetpack we have with us. Knowns:The Jetpack is working correctly, we have a Macbook Pro connecting to it with no issues and its been in use many times in the recent past with multiple windows 7 machines as well.Have verified all settings in the Jetpack, and nothing is mis-configured including number of users ect ect.The T450 is able to see other SSIDs, and is able to connect to them with sucessful connection to the internet. This machine has never connected to the jetpack in the past, so something is preventing it from seeing it.  Any thoughts?      

https://forums.lenovo.com/t5/ThinkPad-T400-T500-and-newer-T/Lenovo-t450-Windows-10-Wireless-not-detecting-wireless-network/td-p/3368827
Relevancy 45.15%

Hi,
I started having BSOD's about a week ago. They came "out of the blue" I could say. I appreciate any help I get

info:
-Win 7 x64 ultimate
-Retail version
-Age of the hardware and windows is about a year
-no re-installs

([email protected] clocks, 4Gb ram, sapphire hd 4870)

EDIT: I ran memtest86+ 3 hours and it reported no mistakes

A:suddenly started to have BSOD's

  
Quote: Originally Posted by zero6


Hi,
I started having BSOD's about a week ago. They came "out of the blue" I could say. I appreciate any help I get

info:
-Win 7 x64 ultimate
-Retail version
-Age of the hardware and windows is about a year
-no re-installs

([email protected] clocks, 4Gb ram, sapphire hd 4870)

EDIT: I ran memtest86+ 3 hours and it reported no mistakes



Multiple things wrong

1-spdt.sys from 2005 almost always causes bsod's

ASACPI.sys Sun Mar 27 22:30:36 2005





Quote:
The 2005 version of this driver is a known BSOD cause.
Please visit this link: ASUSTeK Computer Inc.-Support- download_item_mkt
Scroll down to the Utilities category, then scroll down to the "ATK0110 driver for WindowsXP/Vista/Windows 7 32&64-bit " (it's about the 8th item down).
Download and install it.
Go to C:\Windows\System32\drivers to check and make sure that the ASACPI.sys file is date stamped from 2009 or 2010 (NOT 2005).



2-Old drivers


Code:
ASACPI.sys fffff880`042c1000 0x00008000 3/27/2005 22:30:36 0x42476c4c fffff880`042b9000
SSPORT.sys fffff880`063b4000 0x00008000 8/11/2005 19:07:32 0x42fbda34 fffff880`063ac000
AsIO.sys fffff880`03fb6000 0x00007000 12/17/2007 05:11:49 0x47663d55 fffff880`03faf000
TFsExDisk.sys fffff880`081ad000 0x00009000 9/11/2008 02:15:03 0x48c8b767 fffff880`081a4000
cpuz132_x64.sys fffff880`04679000 0x00008000 3/26/2009 19:17:23 0x49cc0d03 fffff880`04671000
spldr.sys fffff880`015e8000 0x00008000 5/11/2009 12:56:27 0x4a0858bb fffff880`015e0000
amdxata.sys fffff880`00c35000 0x0000b000 5/19/2009 13:56:59 0x4a12f2eb fffff880`00c2a000
How To Find Drivers:




Quote:
- search Google for the name of the driver
- compare the Google results with what's installed on your system to figure out which device/program it belongs to
- visit the web site of the manufacturer of the hardware/program to get the latest drivers (DON'T use Windows Update or the Update driver function of Device Manager).
- if there are difficulties in locating them, post back with questions and someone will try and help you locate the appropriate program.


- - The most common drivers are listed on this page: Driver Reference
- - Driver manufacturer links are on this page: Drivers and Downloads

3-An OS file blamed but not the cause. Please run a system file check

SFC /SCANNOW Command - System File Checker

If the above dont stop the BSOD's run driver verifier

Beyond that, please run Verifier with these settings:
[quote]
Using Driver Verifier is an iffy proposition. Most times it'll crash and it'll tell you what the driver is. But sometimes it'll crash and won't tell you the driver. Other times it'll crash before you can log in to Windows. If you can't get to Safe Mode, then you'll have to resort to offline editing of the registry to disable Driver Verifier.

So, I'd suggest that you first backup your stuff and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
NOTE: You can use Low Resource Simulation if you'd like. From my limited experimentation it makes the BSOD's come faster.
- Select "Select driver nam... Read more

http://www.sevenforums.com/bsod-help-support/122415-suddenly-started-have-bsods.html
Relevancy 45.15%

OS - Windows ultimate bit x I had windows ago 2 days started just BSOD that xp on this hd before i installed windows OEM version for system builders Mobo is about yrs old processor is about a year old videos cards are brand new g memory is yrs old gig memory is brand new Just reinstalled OS in October when i got the new video cards CPU Intel Core Quad Q GHz x Sapphire Radeon HD s running crossifre with eyefinity active MotherBoard Asus P Q Power Supply - Watt yrs old I BSOD that just started 2 days ago just recently installed gig of memory to add to my orignal gig BSOD that just started 2 days ago to give me a total of Gig my Motherboard max out with Gig I also update my graphics drivers to the latest version through steam ATI new program that has steam check and update video card drivers Now for some reason when i leave the computer idle for minutes this is when the screens go into standby and the screensaver activates the computer decides to go to a BSOD and becuz of the settings the computer restarts when it crashes it only restarts once when its sitting at the windows login screen it doesnt restart again So im trying to figure out what the problem is with the computer now is it the newly added memory the new graphics card drivers or maybe the PSU does not have enough power to keep everything going This only happens when idling i can play games and put serious stress on the computer for hours and no crashes happen im worried about it crashing and causing more problems to the HDD or something else Crashes are never good for a comp Thanks anyone that helps i wll attack the dump file and the sysdata file

http://www.techsupportforum.com/forums/f299/bsod-that-just-started-2-days-ago-538933.html
Relevancy 45.15%

Hi,
2 days ago , i've been playing League Of Legends, then suddenly BSOD showed up for the first time. I restarted the PC and it was mush slower.
After few hours, i played GRID Autosport, this time the screen changed like this http://img232.imageshack.us/img232/7987/crash.jpg (Found it on google)
I got it when i played League Of legends again later. Even when on Mozilla Firefox.
I don't remember what BSOD was about.
I'm waiting for your response, Thanks.

A:Started with BSOD then PC crashes very often.

The zip does not contain all the files. Try it again. Try both the options of the Blue Screen of Death (BSOD) Posting Instructions

http://www.sevenforums.com/bsod-help-support/358758-started-bsod-then-pc-crashes-very-often.html
Relevancy 45.15%

My PC started to act weird from yesterday. I had several crashes in World of Warcraft with "memory could not be read" messages. My chrome browser crashed with "memory could not be written" message. I also had a BSOD with "MEMORY_MANAGEMENT" in it. Today I had same BSOD while playing Battlefield 3.

? OS - Windows 7
? x64
? Full retail version
? Age of system - almost 1 year.
? Age of OS installation - 7-8 months since last time I reinstalled it.

? CPU - i7 2600
? Video Card - GTX 560ti
? MotherBoard - ASUS P8P67
? Power Supply - Chieftec A135 Series 1000W

A:Started getting BSOD recently.

False alarm guys,

I've ran memtest and it appears one of my RAM modules is dead. R.I.P. Corsair Vengeance.

http://www.techsupportforum.com/forums/f299/started-getting-bsod-recently-644784.html
Relevancy 45.15%

I had no problems so far Today I was playing Left Dead and after - minutes I got a BSOD This repeated over getting Started BSOD today and over again It worked fine for the past months I've played for hours and no crash or anything The game Started getting BSOD today hasn't received any update and I haven't changed any hardware or software on my PC My config Sirtec HPC- -G S Seagate GB SATA rpm MB Intel Core i Ivy Bridge BOX MSI ZH A-G Geil DDR MB x MHz Started getting BSOD today CL EVO LEGGERA Sapphire Radeon HD MB DDR Dual-X Running Windows Ultimate x I've had no problems so far and other games and programs run perfectly like Max Payne Skyrim Adobe After Effects Cinema D I verified my drivers like it says in your quot Driver verifier quot thread and I got a BSOD I also read on the web to do a chkdsk f r and I got another BSOD when I did it for my drive D Thanks in advance I've also attached the requested stuff

A:Started getting BSOD today

You have the famous blacklisted Lenovo SLIC table Windows Ultimate installed.

I am afraid your installation is not genuine. Non-Genuine Windows contains security leaks and also cannot be properly updated which may result in instabilities and blue screen crashes. If you were not aware that your Windows was Non-Genuine, contact your seller or the company that provided the seller and file a complaint. Also let Microsoft know of the problem: Protect Yourself from Piracy

I am sorry, but due to forum rules, we may not assist you further until you have installed a genuine version of Windows. To put the genuine Windows on, I strongly suggest you backup any important data, format your hard disk, and reinstall Windows 7 to make sure all remnants are removed of the software that you used to make Windows work before. If you do not clean re-install, you may be left with a compromised system and your identity, bank accounts, credit card information, etc. may continue to be at risk as they are now. Once you install a genuine version:Please download and run the MGADiag tool. When it finishes, hit the copy button, and paste in your next post with [code]<MGADiag info>[/code] surrounding the MGADiag info.

http://www.techsupportforum.com/forums/f299/started-getting-bsod-today-675417.html
Relevancy 45.15%

So at the moved. BSOD since started F4 end of October I moved into a new place I carried my computer in my own car F4 BSOD started since moved. and put it in the back seat just to make sure it wouldn't get too jiggled in a moving truck Well ever since I moved I am getting F BSOD Usually when I watch movies youtube mkv files etc I had previously some problems with freezing and all and some random BSOD random BSOD code which they stopped since roughly September still have the minidumps from those Anyway as I said I only get F BSOD this time They also started to get worse in that Windows would stop loading after a BSOD it will just stay at the logo screen then I either have to force a restart or it will automatically either way ask me to do a repair which will always fail When pressing cancel computer will shut down and then will bootup in windows ok after I re-start it Attached are the minidumps

Relevancy 45.15%

Hi all Need some help Started a ago week BSOD in trying to analyze the problem BSOD Started a week ago with BSOD Started a week ago my comp Have been having this issue for less than a week Initially it started off with the comp just shutting off on it's own and rebooting Since then I have unchecked the reboot automatically option and yet I still don't get an error message I got this error when I ran prime and had a movie on ADD Also so you know I had to force this BSOD What is actually happening is BSOD Started a week ago that the computer will suddenly go black and then reboot without any sort of crash report I've read on these forums that it could be my vid card and I just noticed that my vid card fan wasn't running but the temp according to CPUID was constantly degrees celsius and maxing out at celsius when playing games ex Mafia II I've since installed msi afterburner and forced the videocards fan to stay on and now the temp is at celsius Could it be the video card Maybe the psu Current specs i oc'd to ghz gigs of ram Gigabyte GA X A-UD R ati-hd recently updated to most current drivers Windows ultimate bit Antec CP- power supply Noctua Aircooler Please let me know if there is anything else that you need to know Thanks in advance

A:BSOD Started a week ago

  
Quote: Originally Posted by Pracis


Hi all!

Need some help in trying to analyze the problem with my comp. Have been having this issue for less than a week. Initially, it started off with the comp just shutting off on it's own and rebooting. Since then I have unchecked the reboot automatically option and yet I still don't get an error message. I got this error when I ran prime95 and had a movie on.
ADD: Also, so you know I had to force this BSOD. What is actually happening is that the computer will suddenly go black and then reboot without any sort of crash report. I've read on these forums that it could be my vid card and I just noticed that my vid card fan wasn't running but the temp according to CPUID was constantly 61 degrees celsius and maxing out at 81 celsius when playing games (ex Mafia II). I've since installed msi afterburner and forced the videocards fan to stay on and now the temp is at 46 celsius. Could it be the video card? Maybe the psu?
Current specs..

i930 oc'd to 3.5ghz
6 gigs of ram
Gigabyte GA X58A-UD3R
ati-hd 5970 (recently updated to most current drivers)
Windows 7 ultimate 64 bit
Antec CP-1000 (power supply)
Noctua Aircooler
Please let me know if there is anything else that you need to know.

Thanks in advance!



This crash doesnt give definitive information but some indirect conclusions can be made.

1-it is a memory exception caused by either a plugin container or wmiaspi.sys.
run memtest

Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Boot from the CD, and leave it running for at least 5 or 6 passes.
Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot. Test the sticks individually, and if you find a good one, test it in all slots.

2-Plugin container (if firefox) it is an errant add-on. Try running firefox in safe mode to test

3-If it is wmiaspi.sys I would update the BIOS (MAKE SURE YOU HAVE A BACKUP) and run a system file check

SFC /SCANNOW Command - System File Checker


Code:

Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\K\Desktop\010311-27019-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*C:\SymCache*http://msdl.microsoft.com/download/symbols;srv*e:\symbols
*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Machine Name:
Kernel base = 0xfffff800`02e04000 PsLoadedModuleList = 0xfffff800`03041e50
Debug session time: Mon Jan 3 22:58:59.784 2011 (GMT-5)
System Uptime: 0 days 0:33:07.830
Loading Kernel Symbols
...............................................................
................................................................
.....................................
Loading User Symbols
Loading unloaded module list
........
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 3B, {c0000005, fffff96000140ae9, fffff8800cd770e0, 0}

Probably caused by : win32k.sys ( win32k!PostMessageExtended+a9 )

Followup: MachineOwner
---------

3: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* ... Read more

http://www.sevenforums.com/bsod-help-support/135355-bsod-started-week-ago.html
Relevancy 45.15%

I am working on a friends laptop so I don t know what initially Started and Antimalware BSOD with caused these problems or how long they have been going on I am working on an HP latop with windows XP that now has service pack but initially only had service pack McAfee antiirus was supposed to be running on this laptop but it seems like the virus may have disabled it in some way Not Started with Antimalware and BSOD sureOriginally I think this was infected with something called Antimalware My friend tried to get rid of Antimalware by going to All Programs Antimalware folder and RH clicking and deleting As soon as he did this the computer would no longer reboot After attempts of trying to reboot in safe mode-I reinstalled XP from the CD but did not write over any of the programs just XP I Started with Antimalware and BSOD had to change a setting in the BIOS in order for the hard drive to be recognized by XP but besides that the install worked well Next I installed Service Pack for XPI had trouble getting on to the internets so I downloaded Malwarebytes to a flash drive and ran it Results- virusesNext I did the same thing with Adaware - Results- Mostly cookies and a couple quot high threat quot virusesFinally I uninstalled McAfee and installed McAfee Ran it Results - couple virusesI ran CCleaner to get rid of the reminants of virus programs that were throwing up missing DLL windows I thought I was home free because I was able to get back on the internet and I had run the programs above and found no issues I decided to run McAfee one more time before I returned the laptop to my friend Results virusSo I reran McAfee Results- virusesSo I ran Adaware - Results high level threatSo I reran Adaware - Results cleanSo I ran Malwarebytes - Results virusSo I reran Malwarebytes - Resutls cleanand so on and so on I tried several times to run quot combofix quot but I wasn t successfull until right before I began following the steps to the prep guide which clearly state to not use combofix From that point on I followed your prep guide steps and did nothing further with combofix Please check my logs and tell me if you think this laptop is clean or if there are still viruses remaining Thank you for your help with this matter Logs included attachedDDS Ver - - - NTFSx Run by user at on Wed Internet Explorer Microsoft Windows XP Professional GMT - AV Lavasoft Ad-Watch Live Anti-Virus On-access scanning enabled Updated A C F E - FDE- -AFAE- EFC EDE AV McAfee VirusScan Enterprise On-access scanning disabled Updated A B B- C - -A AB-E DEABF F Running Processes C WINDOWS system svchost -k DcomLaunchsvchost exeC WINDOWS System svchost exe -k netsvcssvchost exesvchost exeC Program Files Lavasoft Ad-Aware AAWService exeC WINDOWS system spoolsv exesvchost exeC Program Files Common Files ArcSoft Connection Service Bin ACService exeC Program Files Common Files Apple Mobile Device Support AppleMobileDeviceService exeC Program Files Hewlett-Packard HP Quick Launch Buttons QlbCtrl exeC Program Files Bonjour mDNSResponder exeC WINDOWS system igfxtray exeC WINDOWS system igfxpers exeC Program Files Synaptics SynTP SynTPEnh exeC Program Files McAfee Common Framework udaterui exeC WINDOWS system ctfmon exeC Program Files Java jre bin jqs exeC WINDOWS system igfxsrvc exeC Program Files Kodak Kodak EasyShare software bin EasyShare exeC Program Files Windows Desktop Search WindowsSearch exeC WINDOWS system mfevtps exeC Program Files Microsoft Search Enhancement Pack SeaPort SeaPort exeC WINDOWS system svchost exe -k imgsvcC Program Files Common Files Microsoft Shared Windows Live WLIDSVC EXEC WINDOWS system SearchIndexer exeC Program Files McAfee Common Framework McTray exeC Program Files Common Files Microsoft Shared Windows Live WLIDSvcM exeC Program Files Hewlett-Packard Shared hpqwmiex exeC Program Files Hewlett-Packard HP Quick Launch Buttons Com QLBEx exeC Program Files Lavasoft Ad-Aware AAWTray exeC WINDOWS system notepad exeC WINDOWS explorer exeC Program Files... Read more

A:Started with Antimalware and BSOD

Hello and Welcome to the forums! My name is Gringo and I'll be glad to help you with your computer problems. Somethings to remember while we are working together.Do not run any other tool untill instructed to do so!Please Do not Attach logs or put in code boxes.Tell me about any problems that have occurred during the fix.Tell me of any other symptoms you may be having as these can help also.Do not run anything while running a fix.In the upper right hand corner of the topic you will see a button called Options. If you click on this in the drop-down menu you can choose Track this topic. By doing this and then choosing Immediate E-Mail notification and then clicking on Proceed you will be advised when we respond to your topic and facilitate the cleaning of your machine.We apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here.In order for me to see the status of the infection I will need a new set of logs to start with.Please print out or make a copy in notpad of any instructions given, as sometimes it is necessary to go offline and you will lose access to them.DeFogger: Please download DeFogger to your desktop.

Double click DeFogger to run the tool.
The application window will appear Click the Disable button to disable your CD Emulation drivers Click Yes to continue A 'Finished!' message will appear Click OKDeFogger may ask you to reboot the machine, if it does - click OKDo not re-enable these drivers until otherwise instructed.Download DDS:Please download DDS by sUBs from one of the links below and save it to your desktop:
Download DDS and save it to your desktop

Link1
Link2
Link3

Please disable any anti-malware program that will block scripts from running before running DDS.

Double-Click on dds.scr and a command window will appear. This is normal.Shortly after two logs will appear:
DDS.txt Attach.txtA window will open instructing you save & post the logsSave the logs to a convenient place such as your desktopCopy the contents of both logs & post in your next replyScan With RKUnHookerPlease Download Rootkit Unhooker Save it to your desktop.Now double-click on RKUnhookerLE.exe to run it.Click the Report tab, then click Scan.Check (Tick) Drivers, Stealth,. Uncheck the rest. then Click OK.Wait till the scanner has finished and then click File, Save Report.Save the report somewhere where you can find it. Click Close.Copy the entire contents of the report and paste it in a reply here.Note** you may get this warning it is ok, "Rootkit Unhooker has detected a parasite inside itself!It is recommended to remove parasite, okay?""just click on Cancel, then Accept".information and logs:In your next post I need the following1.logs from DDS2.log from RKUnHooker3.let me know of any problems you may have had[/list]Gringo

http://www.bleepingcomputer.com/forums/t/354930/started-with-antimalware-and-bsod/
Relevancy 45.15%

So this is a strange problem I'm facing these days My OS is extremely stable except when I try to get Git to work I don't remember exactly when this problem started but I did have git for windows installed since quite a while and I think this has been a recent occurrence last - months What Bash started Git when is BSOD I have tried Uninstalled and reinstalled Git For Windows Tried their beta releases as well as latest BSOD when Git Bash is started stable release Installed Git on another drive Tried using GitHub for windows as an alternative Same result What I know is it can't be a hardware issue except my hdd since I have another OS installed on my secondary gb hard drive and git for windows works fine on it Lastly sometimes the screen just freezes instead of giving a BSOD I searched on google but couldn't find someone else facing this problem I have attached the debug files using the bat file Any help is appreciated

A:BSOD when Git Bash is started

Hi rgsilent.

It appears to be a network related BSOD, and Internet Download Manager (I am surprised to see it as a contributing element to a BSOD) is involved in it.

Code:
BugCheck C5, {fffff8800751a6a3, 2, 0, fffff800033bd9fa}

Unable to load image \SystemRoot\system32\DRIVERS\idmwfp.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for idmwfp.sys
*** ERROR: Module load completed but symbols could not be loaded for idmwfp.sys
Probably caused by : Pool_Corruption ( nt!ExDeferredFreePool+13e )

Followup: Pool_corruption
---------
My suggestion to you would be to uninstall Networx, and to update IDM.

Let us know the results.

http://www.sevenforums.com/bsod-help-support/318386-bsod-when-git-bash-started.html
Relevancy 45.15%

Is Windows 7 . . .
- x86 (32-bit) or x64 ? : 64 Professional
- the original installed OS on the system?: No
- an OEM or full retail version?: Retail

- What is the age of system (hardware)?: 7 months
- What is the age of OS installation (have you re-installed the OS?) 7 months

Additional Info
BSOD's started roughly week ago, when I replaced my CPU Fan (CoolIT ECO A.L.C. Liquid cooling system) with the same model.
I had very few bsods before that.

A:BSOD's started recently

You have a number of dump files. I looked at your five dumps from today. Please review the usual causes in each of the error codes.





Quote:
Error code F7, DRIVER_OVERRAN_STACK_BUFFER. Usual causes: Device driver, Malware.

Error code 1E, KMODE_EXCEPTION_NOT_HANDLED. Usual causes: Device driver, hardware, System service, compatibility, Remote control programs, memory, BIOS.

Error code 24 (2X), NTFS_FILE_SYSTEM. Usual causes: Disk corruption, insufficient physical memory, Device driver, Indexing, Resident antivirus, backup, defrag programs, Disk/Drive failing/failure.

Error code 1A, MEMORY_MANAGEMENT. Usual causes: Device driver, memory, kernel.


To get started with troubleshooting, I suggest you uninstall Daemon Tools. One of your dumps directly blames sptd.sys for the crash.





Quote:
Please uninstall any CD virtualization programs such as Daemon Tools and Alcohol 120%. They use a driver, found in your dump, sptd.sys, that is notorious for causing BSODs. Use this SPTD uninstaller when you're done: DuplexSecure - Downloads. Select delete; do not select reinstall.
Here is an alternative virtualization program that does not user the sptd.sys driver:

Freeware MagicISO Virtual CD/DVD-ROM(MagicDisc) Overview



Also, please download and install Malwarebytes, update it and do a quick scan. If it finds malware, do a thorough scan. One of the dumps indicates a possible malware attack.

You have another know BSOD maker on your system. Uninstall Zone Alarm using this uninstall tool: http://download.zonealarm.com/bin/fr...cpes_clean.exe. ZA is a known cause of BSOD's on many Win 7 systems. Make sure Windows Firewall is turned on after uninstalling ZA.

I find two outdated drivers loaded on your system. Older drivers can and do cause memory corruption and BSOD's. Up date these drivers.





Quote:
iaStorV.sys Wed Apr 08 12:57:17 2009 - Intel Matrix Storage Manager driver (base)http://downloadcenter.intel.com/Default.aspx

netr28x.sys Fri Jun 19 03:56:06 2009 - Ralink RT2860 series Wireless LAN Card (you may have a different manufacturer)Ralink corp.


How to find drivers -





Quote:
- I have listed links to most of the drivers in the code box below. Please use the links there to see what info I've found about those drivers.
- search Google for the name of the driver
- compare the Google results with what's installed on your system to figure out which device/program it belongs to
- visit the web site of the manufacturer of the hardware/program to get the latest drivers (DON'T use Windows Update or the Update driver function of Device Manager).
- if there are difficulties in locating them, post back with questions and someone will try and help you locate the appropriate program.

- - The most common drivers are listed on this page: Driver Reference
- - Driver manufacturer links are on this page: Drivers and Downloads


Because of two instances of error 24, I recommend that you run Check Disk:





Quote:
Run CHKDSK /R /F from an elevated (Run as adminstrator) Command Prompt. Please do this for each hard drive on your system.
When it tells you it can't do it right now - and asks you if you'd like to do it at the next reboot - answer Y (for Yes) and press Enter. Then reboot and let the test run. It may take a while for it to run, but keep an occasional eye on it to see if it generates any errors. See "CHKDSK LogFile" below in order to check the results of the test.

Elevated Command Prompt:
Go to Start and type in "cmd.exe" (without the quotes)
At the top of the Search Box, right click on Cmd.exe and select "Run as administrator"

CHKDSK LogFile:
Go to Start and type in "eventvwr.msc" (without the quotes) and press Enter
Expand the Windows logs heading, then select the Application log file entry.
Double click on the Source column header.
Scroll down the list until yo... Read more

http://www.sevenforums.com/bsod-help-support/120777-bsods-started-recently.html
Relevancy 45.15%

My laptop was running just fine and the randomly last night it began to start giving me the BSOD.

A:Randomly started getting BSOD

You are getting network issues but the driver can't be identified, please enable Driver Verifier by following these instructions.

Driver Verifier - Enable and Disable

Before enabling Driver Verifier can you please create a restore point because verifier can sometimes stop the system booting, even in safe mode.

System Restore Point - Create


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck D1, {28, 2, 0, fffff880015136fd}

Probably caused by : NETIO.SYS ( NETIO!RtlCopyBufferToMdl+1d )

Followup: MachineOwner

http://www.sevenforums.com/bsod-help-support/329657-randomly-started-getting-bsod.html
Relevancy 45.15%

See http www bleepingcomputer com forums t police-report-u-cash for background This problem first started on August It should be easy to clobber with the -bit version of Hitman Pro - but I realized you need an internet connection to create the Kickstart USB drive The healthy computer has never had internet access I connected my network adapter and had to move the drivers over BSOD U-Cash, ... now Started as from the sick computer and logged into the network Network connections shows decent connectivity but neither Hitman nor Firefox can connect to the internet Working now - I reset the services on the healthy computer but I didn t bother Started as U-Cash, now BSOD ... with Hitman after the rest of what happened below The sick computer could not connect to the internet when I plugged in the wireless network adapter using F-Secure Rescue CD but I don t know Linux well enough to know where to input the wireless network key I could get a co-worker to create a Kickstart USB key for me or now I could do it myself Started as U-Cash, now BSOD ... but I have three concerns He might not have a -bit computer and I m not sure it would work if he Started as U-Cash, now BSOD ... tried to create the kickstart key using the -bit program and a -bit computer Not an issue The software appears to be cloud based so since the sick computer doesn t seem to be able to connect to the internet and at this point I might not want it to I m not sure if it would work anyway Avira wiped out most of the OS so it might not be easy to get it back to as broken as it was before and then run Hitman Pro Other things that I tried I was able to boot into Safe Mode with Command Prompt and access System Restore however restoring the computer to July well before the problem appeared still left me at the white screen I noticed that System Restore said it renamed one of my folders from G Portable Apps Firefox Portable something profile doomed to same doomed Doomed didn t sound like something one of my programs would have created so when I connected the sick HD to the healthy computer with the Kingwin USB to SATA adapter to get the wireless adapter drivers I deleted the Firefox Portable directory I m pretty sure I have a backup - if not I can re-install I still got the white screen so I tried to restore the computer to July July and August All of those said they failed to install and no changes were made to the system I use F-Secure Recovery Disk and scanned only the C Programs partition and the master boot records using USB virus definitions from yesterday That took minutes so I didn t try to scan the MB G Partition Nothing was found but it could not accessC Documents and Settings lt user name gt Recent Desktop ini I O Error C System Volume Information restore B - E - C - not sure if that is the full filename p p C Windows Installer B dc msp scan timeout p p C Windows Driver cache i driver cab scan timeout p p p p I have AntiVir and Kaspersky Rescue CD s but since this is not technically a virus I didn t know if it were worth trying them - later I tried AntiVir and found out it was not p p p p I then tried the steps here a href 'http www bleepingcomputer com forums t fbi-virus-on-windows-xp-police-report ' class 'bbc url' title '' http www bleepingcomputer com forums t fbi-virus-on-windows-xp-police-report a p p p p The CD I used was an NLITE WinXP CD with Sata and Recovery Console - I m fairly sure but not positive that is what I installed on the sick PC p p p p When I booted with UBCD and tried to enable NetworkSupport it said that the network adapter could not be configured p p p p I am attaching the FRST scan below - I have no idea what to make of it - I replaced my user name in it but didn t change anything else I didn't know when I ran it that it might make an addition txt file so I don't have that p p p p Scan result of Farbar Recovery Scan Tool FRST x Version - - br Ran by SYSTEM on BARTPE- - - br Running from E br Platform Microsoft Windows XP Service Pack X La... Read more

A:Started as U-Cash, now BSOD ...

Hello and welcome to Bleeping Computer! I am HelpBot: an automated program designed to help the Bleeping Computer Staff better assist you! This message contains very important information, so please read through all of it before doing anything.
We apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here.
To help Bleeping Computer better assist you please perform the following steps:
*************************************************** In order to continue receiving help at BleepingComputer.com, YOU MUST tell me if you still need help or if your issue has already been resolved on your own or through another resource! To tell me this, please click on the following link and follow the instructions there.CLICK THIS LINK >>> http://www.bleepingcomputer.com/logreply/586174 <<< CLICK THIS LINK
If you no longer need help, then all you needed to do was the previous instructions of telling me so. You can skip the rest of this post. If you do need help please continue with Step 2 below.
***************************************************If you still need help, I would like you to post a Reply to this topic (click the "Add Reply" button in the lower right hand of this page). In that reply, please include the following information:If you have not done so already, include a clear description of the problems you're having, along with any steps you may have performed so far.A new FRST log. For your convenience, you will find the instructions for generating these logs repeated at the bottom of this post.Please do this even if you have previously posted logs for us.If you were unable to produce the logs originally please try once more.If you are unable to create a log please provide detailed information about your installed Windows Operating System including the Version, Edition and if it is a 32bit or a 64bit system.If you are unsure about any of these characteristics just post what you can and we will guide you.Please tell us if you have your original Windows CD/DVD available. Upon completing the above steps and posting a reply, another staff member will review your topic and do their best to resolve your issues.
Thank you for your patience, and again sorry for the delay.
***************************************************
We need to see some information about what is happening in your machine. Please perform the following scan again: Download FRST by Farbar from the following link if you no longer have it available and save it to your destop.FRST Download LinkWhen you go to the above page, there will be 32-bit and 64-bit downloads available. Please click on the appropriate one for your version of Windows. If you are unsure as to whether your Windows is 32-bit or 64-bit, please see this tutorial.Double click on the FRST icon and allow it to run. Agree to the usage agreement and FRST will open. Do not make any changes and click on the Scan button. Notepad will open with the results. Post the new logs as explained in the prep guide. Close the program window, and delete the program from your desktop.As I am just a silly little program running on the BleepingComputer.com servers, please do not send me private messages as I do not know how to read and reply to them! Thanks!

http://www.bleepingcomputer.com/forums/t/586174/started-as-u-cash-now-bsod/
Relevancy 45.15%

Hello,

I had those BSODs with XP but never expected this in a recent machine running Win7 Pro 64 bit.

This started only after the 10 december (that day I update windows via automatic updates...I do not know if there is anything to do with that of course!).

After that I restored via Macrium reflect to a previous state (from april 2013) but....windows update installed all the updates agian!. And I have another BSOD again today!

I restarted my computer and went diner! When I came back I had this screen (please see jpegs).

All your help will be appreciated.

I'm running a Win 7 Pro 64bit, Toshiba Tecra laptop with a 2nd gen i7 + 8 GB RAM + 512GB Plextor M5Pro SSD.

Cheers,
paulo

A:BSOD started too in win7 pro

Please update these older drivers. Links are included to assist in looking up the source of the drivers. If unable to find an update, please remove (un-install) the program responsible for that driver. DO NOT manually delete/rename the driver as it may make the system unbootable! :

tosporte.sys Tue Jun 16 16:48:47 2009 (4A37788F)
Toshiba Bluetooth Port Emulation Driver
Driver Reference Table - tosporte.sys

TVALZFL.sys Fri Jun 19 16:05:44 2009 (4A3B62F8)
TVALZ Filter Driver - Toshiba
Driver Reference Table - TVALZFL.sys

pgeffect.sys Mon Jun 22 15:00:11 2009 (4A3F481B)
Toshiba Universal Camera Filter driver/Pangu Effect driver
Driver Reference Table - pgeffect.sys

PxHlpa64.sys Wed Jun 24 05:16:35 2009 (4A416253)
Sonic CD/DVD driver (used by many different CD/DVD programs)
Driver Reference Table - PxHlpa64.sys

nusb3hub.sys Thu Feb 10 11:52:32 2011 (4D537D20)
NEC Electronics USB 3.0 Host Controller Driver (previous BSOD issues with 2010 and earlier versions)
Driver Reference Table - nusb3hub.sys

nusb3xhc.sys Thu Feb 10 11:52:33 2011 (4D537D21)
NEC Electronics USB 3.0 Host Controller Driver (previous BSOD issues with 2010 and earlier versions)
Driver Reference Table - nusb3xhc.sys

atikmpag.sys Wed Mar 2 21:17:13 2011 (4D6E5F79)
ATI Video driver (remove the Catalyst Control Center and only install the Display Driver)
Driver Reference Table - atikmpag.sys

atikmdag.sys Wed Mar 2 21:46:10 2011 (4D6E6642)
ATI Video driver (remove the Catalyst Control Center and only install the Display Driver)
Driver Reference Table - atikmdag.sys

Perform a clean install of a driver following: How to Clean Left Over Driver Files with Driver Sweeper

Reduce items at start-up: Startup Programs - Change

Perform a clean boot: Troubleshoot Application Conflicts by Performing a Clean Startup

Run a System file check (SFC): SFC /SCANNOW Command - System File Checker

Run Disk Check on your Hard Drive(s): Disk Check

Scan with Kaspersky TDSSKiller:Anti-rootkit utility TDSSKiller

ESET online scanner: Free Online Virus Scanner | ESET

Use Revo Uninstaller to uninstall stubborn software. Opt for Advance Mode while uninstalling which allows leftover registry removal: Download Revo Uninstaller Freeware - Free and Full Download - Uninstall software, remove programs, solve uninstall problems

Check for heating issues using Speccy or HWmonitor

Upload a screen shot: Screenshots and Files - Upload and Post in Seven Forums


Code:
Debug session time: Sun Dec 15 03:10:09.386 2013 (UTC + 6:00)
Built by: 7601.18247.amd64fre.win7sp1_gdr.130828-1532
System Uptime: 0 days 0:36:15.229
Probably caused by : ntkrnlmp.exe ( nt!KeAcquireInStackQueuedSpinLock+5f )
BugCheck A, {80, 2, 1, fffff800034e1f1f}
BugCheck Info: IRQL_NOT_LESS_OR_EQUAL (a)
Bugcheck code 0000000A
Arguments:
Arg1: 0000000000000080, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000001, bitfield :
bit 0 : value 0 = read operation, 1 = write operation
bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: fffff800034e1f1f, address which referenced memory
BUGCHECK_STR: 0xA
DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT
PROCESS_NAME: System
FAILURE_BUCKET_ID: X64_0xA_nt!KeAcquireInStackQueuedSpinLock+5f
MaxSpeed: 2800
CurrentSpeed: 2790
BiosVersion = Version 4.10
BiosReleaseDate = 01/08/2013
SystemManufacturer = TOSHIBA
SystemProductName = TECRA R840
??????????????????????????????????????????????????????????????????????????????????????``

http://www.sevenforums.com/bsod-help-support/315088-bsod-started-too-win7-pro.html
Relevancy 45.15%

Hi all

I have recently started to get regular BSOD when i start my PC for the 1st time on a day.
I decided to install a fresh windows 7 on my spare HDD just to eliminate any potential driver update errors or programs that may cause BSOD.
It seems to only be on a fresh startup for the day which makes me think it might be a hardware issue (hope it isn't).
Have attached files from most recent BSOD which is on the totally fresh Windows 7 which only has the most basic programs i need to get by on it.

A:Started getting different BSOD on Startup without doing anything

Hi,

I would recommend updating Windows 7 to Service Pack 1, and then applying all updates it offers after that. Then see if you still get any BSOD's.

Regards,
Golden

http://www.sevenforums.com/bsod-help-support/288303-started-getting-different-bsod-startup-without-doing-anything.html
Relevancy 45.15%

Suddenly getting BSOD. It's happened 3 times in the last week. I'm running a Windows 8 upgrade on an originally Windows 7 machine. I did the upgrade 6 or 7 months ago. No problems since then. Debug of the minidump gives "Probably caused by : win32k.sys ( win32k!SURFACE::bDeleteSurface+5b6 )" which I couldn't find anything useful for on google.

A:BSOD started in the last week

Your BIOS dates from 2011. Please check at the manufacturer's website to see if there are any BIOS updates available for your system. Also check the readme file to see if they apply to the problems that you are having. Please be advised that flashing the BIOS is a very unforgiving process - and one mistake can physically damage your motherboard.

C: drive only has about 5% free space. Windows likes 15% free space in order to perform stuff "behind the scenes" without adversely affecting the system's performance. Please free up 15% on ALL hard drives (you can get away with 10% on larger drives and won't notice a large performance penalty)

Please update these older drivers. Links are included to assist in looking up the source of the drivers. If unable to find an update, please remove (un-install) the program responsible for that driver. DO NOT manually delete/rename the driver as it may make the system unbootable! :

NTIDrvr.sys Mon Apr 19 21:37:59 2010 (4BCD0577)
NTI CD-ROM Filter Driver by NewTech Infosystems (likely a part of Acer Empowering Technology)
http://www.carrona.org/drivers/driver.php?id=NTIDrvr.sys

usbfilter.sys Thu Apr 29 06:43:06 2010 (4BD962BA)
AMD USB Filter Driver (likely part of the chipset drivers)
http://www.carrona.org/drivers/driver.php?id=usbfilter.sys

UBHelper.sys Tue Jul 6 00:19:26 2010 (4C32AECE)
NTI CD &DVD-Maker or NTI Backup NOW! or NTI CD-Maker by NewTech Infosystems (usually in Acer Empowering Technology)
http://www.carrona.org/drivers/driver.php?id=UBHelper.sys

SynTP.sys Thu Jul 29 23:26:57 2010 (4C524681)
Synaptic Touch Pad Driver
http://www.carrona.org/drivers/driver.php?id=SynTP.sys

CHDRT64.sys Tue Jan 11 02:01:28 2011 (4D2C0048)
Conexant High Definition SmartAudio
http://www.carrona.org/drivers/driver.php?id=CHDRT64.sys

Sftvollh.sys Fri Sep 30 12:42:46 2011 (4E85F186)
Microsoft Application Virtualization (App-V) driver
http://www.carrona.org/drivers/driver.php?id=Sftvollh.sys

Sftplaylh.sys Fri Sep 30 12:43:05 2011 (4E85F199)
Microsoft Application Virtualization (App-V) driver
http://www.carrona.org/drivers/driver.php?id=Sftplaylh.sys

Sftfslh.sys Fri Sep 30 12:43:06 2011 (4E85F19A)
Microsoft Application Virtualization (App-V) driver
http://www.carrona.org/drivers/driver.php?id=Sftfslh.sys

Sftredirlh.sys Fri Sep 30 12:43:14 2011 (4E85F1A2)
Microsoft Application Virtualization (App-V) driver
http://www.carrona.org/drivers/driver.php?id=Sftredirlh.sys

If all of this doesn't stop the BSOD's, please run Driver Verifier according to these instructions: Driver Verifier Settings

Analysis:
The following is for informational purposes only.

Code:
**************************Wed Mar 13 03:22:47.322 2013 (UTC - 4:00)**************************
Loading Dump File [C:\Users\Owner\SysnativeBSODApps\031313-50762-01.dmp]
Windows 8 Kernel Version 9200 MP (2 procs) Free x64
Built by: 9200.16496.amd64fre.win8_gdr.130108-1504
System Uptime:0 days 0:26:11.402
Probably caused by :win32k.sys ( win32k!SURFACE::bDeleteSurface+5b6 )
BugCheck 3B, {c0000005, 14d12d000, fffff88017b901c0, 0}
BugCheck Info: SYSTEM_SERVICE_EXCEPTION (3b)
Arguments:
Arg1: 00000000c0000005, Exception code that caused the bugcheck
Arg2: 000000014d12d000, Address of the instruction which caused the bugcheck
Arg3: fffff88017b901c0, Address of the context record for the exception that caused the bugcheck
Arg4: 0000000000000000, zero.
BUGCHECK_STR: 0x3B
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
PROCESS_NAME: explorer.exe
FAILURE_BUCKET_ID: 0x3B_win32k!SURFACE::bDeleteSurface
BIOS Version V1.15
BIOS Release Date 08/19/2011
Manufacturer Acer
Product Name Aspire 5253
??????????????????????????????????????????????????????????????????????????????????????``
**************************Wed Mar 13 01:52:43.220 2... Read more

http://www.eightforums.com/bsod-crashes-debugging/22016-bsod-started-last-week.html
Relevancy 45.15%

Computer has recent fresh install of Windows 7 Home Premium x 64 with 6GB of ram. I have noticed recently (the past week) that it will BSOD randomly. Mostly happens when using for light tasks like browsing etc.

I am not able to open the dmp files and really don't know how to interpret. Initially I thought it was a COMODO issue but uninstall has not fixed anything.

Much appreciation for any help out there.

TIA

A:BSOD Started 5 days ago.

Hi -



All 13 BSODs name Asus charger driver as the probable cause -

Code:
AiCharger.sys Wed May 05 04:37:36 2010 (4BE12E50)
Check for driver update - http://sysnative.com/0x1/DriverReference.html#AiCharger.sys

Regards. . .

jcgriff2


`


BSOD SUMMARY

Code:

Loading Dump File [C:\Users\PalmDesert\_jcgriff2_\dbug\__Kernel__\111011-16130-01.dmp]
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Debug session time: Thu Nov 10 14:55:27.038 2011 (GMT-5)
System Uptime: 0 days 1:12:36.427
*** WARNING: Unable to verify timestamp for AiCharger.sys
*** ERROR: Module load completed but symbols could not be loaded for AiCharger.sys
Probably caused by : AiCharger.sys
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x9F
PROCESS_NAME: System
FAILURE_BUCKET_ID: X64_0x9F_IMAGE_AiCharger.sys
Bugcheck code 0000009F
Arguments 00000000`00000003 fffffa80`0958e060 fffff800`00b9c518 fffffa80`09f6b1a0
BiosVersion = 6.12
BiosReleaseDate = 07/12/2010
SystemManufacturer = Hewlett-Packard
SystemProductName = HPE-410t
MaxSpeed: 2800
CurrentSpeed: 2793
??????????????????????????????????????????????????????????????????????????????????????``
Loading Dump File [C:\Users\PalmDesert\_jcgriff2_\dbug\__Kernel__\111011-15475-01.dmp]
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Debug session time: Thu Nov 10 13:41:11.272 2011 (GMT-5)
System Uptime: 0 days 1:02:51.661
*** WARNING: Unable to verify timestamp for AiCharger.sys
*** ERROR: Module load completed but symbols could not be loaded for AiCharger.sys
Probably caused by : AiCharger.sys
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x9F
PROCESS_NAME: System
FAILURE_BUCKET_ID: X64_0x9F_IMAGE_AiCharger.sys
Bugcheck code 0000009F
Arguments 00000000`00000003 fffffa80`09469060 fffff800`00b9c518 fffffa80`098b1b40
BiosVersion = 6.12
BiosReleaseDate = 07/12/2010
SystemManufacturer = Hewlett-Packard
SystemProductName = HPE-410t
MaxSpeed: 2800
CurrentSpeed: 2793
??????????????????????????????????????????????????????????????????????????????????????``
Loading Dump File [C:\Users\PalmDesert\_jcgriff2_\dbug\__Kernel__\111011-16192-01.dmp]
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Debug session time: Thu Nov 10 12:36:39.110 2011 (GMT-5)
System Uptime: 0 days 1:55:41.124
*** WARNING: Unable to verify timestamp for AiCharger.sys
*** ERROR: Module load completed but symbols could not be loaded for AiCharger.sys
Probably caused by : AiCharger.sys
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x9F
PROCESS_NAME: System
FAILURE_BUCKET_ID: X64_0x9F_IMAGE_AiCharger.sys
Bugcheck code 0000009F
Arguments 00000000`00000003 fffffa80`09285060 fffff800`00b9c518 fffffa80`0588f8c0
BiosVersion = 6.12
BiosReleaseDate = 07/12/2010
SystemManufacturer = Hewlett-Packard
SystemProductName = HPE-410t
MaxSpeed: 2800
CurrentSpeed: 2793
??????????????????????????????????????????????????????????????????????????????????????``
Loading Dump File [C:\Users\PalmDesert\_jcgriff2_\dbug\__Kernel__\111011-17019-01.dmp]
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Debug session time: Thu Nov 10 10:39:18.398 2011 (GMT-5)
System Uptime: 0 days 9:14:51.413
*** WARNING: Unable to verify timestamp for AiCharger.sys
*** ERROR: Module load completed but symbols could not be loaded for AiCharger.sys
Probably caused by : AiCharger.sys
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x9F
PROCESS_NAME: System
FAILURE_BUCKET_ID: X64_0x9F_IMAGE_AiCharger.sys
Bugcheck code 0000009F
Arguments 00000000`00000003 fffffa80`085d9060 fffff800`00b9c518 fffffa80`0a593b40
BiosVersion = 6.12
BiosReleaseDate = 07/12/2010
SystemManufacturer = Hewlett-Packard
SystemProductName = HPE-410t
MaxSpeed: 2800
CurrentSpeed: 2793
??????????????????????????????????????????????????????????????????????????????????????``
Loading Dump File [C:\Users\PalmDesert\_jcgriff2_\dbug\__Kernel__\110911-17596-01... Read more

http://www.sevenforums.com/bsod-help-support/196538-bsod-started-5-days-ago.html
Relevancy 45.15%

About 2 weeks ago I got a BSOD that said driver IRQL not less or equal, and a quick google search pointed me towards a bad network driver, so I reinstalled it. However yesterday I blue screened again, but this time I was unable to find any useful information before my computer restarted. I attached the files, and I would be very appreciative if someone could help me analyze them.

Edit: An hour after posting this my computer just black screened. No error or anything, just black.

A:Started getting BSOD on new comp

Re-run DM Log Collector - the current attachment is incomplete.

1. Download the DM Log Collector application to your desktop by clicking the link below

DM Log Collector.exe

2. Run it by double-clicking the icon on your desktop, and follow the prompts.
3. Locate the .ZIP file that is created on your desktop, and upload it here in your next reply.

http://www.sevenforums.com/bsod-help-support/366821-started-getting-bsod-new-comp.html
Relevancy 45.15%

Hi all I own a Dell XPS M happening started BSOD laptop BSOD started happening which I installed windows on Lately I seem to having a problem where my computer would crash BSOD either while I was using it or when I was away doing something else For the times I have been here my crash has said IRQL DRIVER NOT LESS OR EQUAL This happens probably - times a day and it's starting to get annoying I increased my virtual memory size to the max it can go times my memory was the suggested amount and i have GB of RAM running a bit windows so usable and updated my graphics card drivers as well I'm not sure what this problem is coming from It could be that I had to have my laptop's motherboard replaced by dell a week after BSOD started happening the windows installation because of some hardware failure or so they claim DO you think I would have to reinstall windows Or is there some way I can make everything better without me having to go through all that trouble Thanks

A:BSOD started happening

  
Quote: Originally Posted by Gooseling


Hi all,

I own a Dell XPS M1330 laptop which I installed windows 7 on. Lately I seem to having a problem where my computer would crash (BSOD) either while I was using it or when I was away doing something else. For the times I have been here my crash has said IRQL_DRIVER_NOT_LESS_OR_EQUAL

This happens probably 3-4 times a day and it's starting to get annoying. I increased my virtual memory size to the max it can go (3 times my memory was the suggested amount and i have 4GB of RAM running a 32 bit windows 7 so 3.5 usable) and updated my graphics card drivers as well.

I'm not sure what this problem is coming from. It could be that I had to have my laptop's motherboard replaced by dell a week after the windows 7 installation because of some hardware failure (or so they claim).

DO you think I would have to reinstall windows 7? Or is there some way I can make everything better without me having to go through all that trouble?
Thanks



We need the actual BSOD. use these to find and upload them to us.http://www.sevenforums.com/crash-loc...d-problem.html

thanks

ken

http://www.sevenforums.com/bsod-help-support/84509-bsod-started-happening.html
Relevancy 44.72%

Product name:HP NotebookProduct number:X7G64EA#ABU every time my laptop installs automatic updates it removes my ability to connect wirelessly to my lg smart tv (after 2 months of no problems)i have encountered this problem 3 times the first time support was able to help my and it was one simple tickbox that fixed it, but the next time that didnt work and neither did rolling back to a previous back up 5 days before the update and i ended up having to do a fresh install yesterday(after 90 mins on the phone with knowhow support), then this evening it happened again so i uninstalled windows update kb3197954 and it is now working again but this is getting frustrating PLEASE FIX IT

http://h30434.www3.hp.com/t5/Notebook-Wireless-and-Networking/windows-update-kb3197954-removes-my-ability-to-connect/td-p/5830314
Relevancy 44.72%

My computer randomly started to BSOD.
first I had clock_watchdog_timeout error whenever I open my browser
next I start having DRIVER_VERIFIER_DETECTED_VIOLATION

Two thing happened before the BSOD started:
I used one of my ram sticks in another computer for testing
I installed Visual Studio 2013 and XNA

cpu is OC at 4.4ghz and gpu also OC which was completely stable until recently.

A:BSOD started randomly to occur.

Hi Scorp200,

I have analyzed your dump file and I am posting below the list of your 3rd party drivers which you must find updates for.

Code:
**************************Sun Jun 22 20:33:43.627 2014 (UTC + 5:30)**************************
WinRing0x64.sys Sat Jul 26 18:59:37 2008 (488B26C1)
LGBusEnum.sys Tue Nov 24 07:06:48 2009 (4B0B38B0)
LGVirHid.sys Tue Nov 24 07:06:48 2009 (4B0B38B0)
HECIx64.sys Tue Jul 3 03:44:58 2012 (4FF21D62)
speedfan.sys Sun Dec 30 02:29:35 2012 (50DF59B7)
RTCore64.sys Mon Mar 11 11:02:06 2013 (513D6C56)
e1i63x64.sys Wed Mar 20 13:07:29 2013 (51496739)
ladfGSCamd64.sys Tue Apr 16 00:09:12 2013 (516C4950)
ladfGSRamd64.sys Tue Apr 16 00:09:15 2013 (516C4953)
LGSHidFilt.Sys Thu May 30 20:46:33 2013 (51A76D51)
SYMEVENT64x86.SYS Sat Jul 27 07:56:58 2013 (51F32FF2)
SRTSPX64.SYS Sat Jul 27 08:15:06 2013 (51F33432)
Ironx64.SYS Tue Jul 30 06:29:35 2013 (51F70FF7)
SYMDS64.SYS Wed Jul 31 04:59:08 2013 (51F84C44)
intelppm.sys Thu Aug 22 14:16:35 2013 (5215CFEB)
usb80236.sys Thu Aug 22 17:08:16 2013 (5215F828)
dump_storahci.sys Thu Aug 22 17:10:39 2013 (5215F8B7)
EX64.SYS Fri Aug 23 02:06:51 2013 (52167663)
ENG64.SYS Fri Aug 23 02:08:20 2013 (521676BC)
eudskacs.sys Wed Sep 4 08:44:03 2013 (5226A57B)
eubakup.sys Wed Sep 4 08:44:10 2013 (5226A582)
EUBKMON.sys Wed Sep 4 08:44:32 2013 (5226A598)
EuFdDisk.sys Wed Sep 4 08:44:38 2013 (5226A59E)
ccSetx64.sys Tue Sep 24 09:28:04 2013 (52410DCC)
nvhda64v.sys Thu Nov 28 19:08:09 2013 (52974741)
RNDISMP6.SYS Fri Dec 20 12:47:20 2013 (52B3EF00)
ssudbus.sys Thu Jan 2 15:21:22 2014 (52C5369A)
SRTSP64.SYS Tue Feb 11 04:34:55 2014 (52F95B17)
SYMNETS.SYS Thu Feb 13 16:55:14 2014 (52FCAB9A)
SYMEFA64.SYS Fri Feb 28 05:02:07 2014 (530FCAF7)
IDSvia64.sys Wed Mar 5 10:00:47 2014 (5316A877)
eeCtrl64.sys Thu Mar 20 22:00:59 2014 (532B17C3)
EraserUtilRebootDrv.sys Thu Mar 20 22:00:59 2014 (532B17C3)
nvvad64v.sys Fri Mar 28 19:02:06 2014 (533579D6)
BHDrvx64.sys Tue May 6 12:34:20 2014 (53688974)
Hamdrv.sys Tue May 13 17:58:59 2014 (5372100B)
NvStreamKms.sys Thu May 22 22:13:14 2014 (537E2922)
xb1usb.sys Tue May 27 13:43:13 2014 (53844919)
nvlddmkm.sys Fri Jun 13 05:48:13 2014 (539A4345)


http://www.carrona.org/drivers/driver.php?id=WinRing0x64.sys
http://www.carrona.org/drivers/driver.php?id=LGBusEnum.sys
http://www.carrona.org/drivers/driver.php?id=LGVirHid.sys
http://www.carrona.org/drivers/driver.php?id=HECIx64.sys
http://www.carrona.org/drivers/driver.php?id=speedfan.sys
http://www.carrona.org/drivers/driver.php?id=RTCore64.sys
http://www.carrona.org/drivers/driver.php?id=e1i63x64.sys
http://www.carrona.org/drivers/driver.php?id=ladfGSCamd64.sys
http://www.carrona.org/drivers/driver.php?id=ladfGSRamd64.sys
http://www.carrona.org/drivers/driver.php?id=LGSHidFilt.Sys
http://www.carrona.org/drivers/driver.php?id=SYMEVENT64x86.SYS
http://www.carrona.org/drivers/driver.php?id=SRTSPX64.SYS
http://www.carrona.org/drivers/driver.php?id=Ironx64.SYS
http://www.carrona.org/drivers/driver.php?id=SYMDS64.SYS
http://www.carrona.org/drivers/driver.php?id=intelppm.sys
usb80236.sys - this driver hasn't been added to the DRT as of this run. Please search Google/Bing for the driver if additional information is needed.
http://www.carrona.org/drivers/driver.php?id=dump_storahci.sys
http://www.carrona.org/drivers/driver.php?id=EX64.SYS
http://www.carrona.org/drivers/driver.php?id=ENG64.SYS
http://www.carrona.org/drivers/driver.php?id=eudsk... Read more

http://www.eightforums.com/bsod-crashes-debugging/48525-bsod-started-randomly-occur.html
Relevancy 44.72%

The BSOD's started once with BF3 and randomly occurred even when I wasn't even playing the game.

But it stopped for a while and then just recently started happening again.

There have been different types of BSODs happening; but it mostly started happening after I installed the Video Card.

The diagnostics file is attached.

Please help.

Thanks.

A:BSOD started with BF3, now getting 0x0000001a error

Welcome to SevenForums.

Re-seat the video card and RAM sticks.

Reinstall video drivers:

METHOD:





Quote:
Click on the Start ► Control Panel ► Programs ► Uninstall a program ► Uninstall everything related to NVIDIA and restart the system. Delete remnants of its drivers/older drivers using Driver Fusion/Sweeper

Link: NVIDIA Driver Downloads - Automatically Detect NVIDIA Products


Video Card - Stress Test with Furmark Video Card - Stress Test with Furmark
Monitor your temps with Speccy during these tests Speccy - System Information - Free Download
Video Card - Memory Test (For 20 passes)|MG| Video Memory Stress Test 1.7.116 Download
Take memtest. Run for 8 passes and test each stick in a know good slot for an additional 6 passes.
RAM - Test with Memtest86+





Quote:
The goal is to test all the RAM sticks and all the motherboard slots.

Check your motherboard manual to ensure the RAM sticks are in the recommended motherboard slots. Some motherboards have very specific slots required for the number of RAM sticks installed.

If you get errors, stop the test and continue with the next step.

1. Remove all but one stick of RAM from your computer (this will be RAM stick #1), and run Memtest86 again, for 7 passes. *Be sure to note the RAM stick, use a piece of tape with a number, and note the motherboard slot.
If this stick passes the test then go to step #3.

2. If RAM stick #1 has errors, repeat the test with RAM stick #2 in the same motherboard slot. *If RAM stick #2 passes, this indicates that RAM stick #1 may be bad. If you want to be absolutely sure, re-test RAM stick #1 in another known good slot.
*If RAM stick #2 has errors, this indicates another possible bad RAM stick, a possible motherboard slot failure or inadequate settings.
3. Test the next stick of RAM (stick #2) in the next motherboard slot. *If this RAM stick has errors repeat step #2 using a known good stick if possible, or another stick.
*If this RAM stick has no errors and both sticks failed in slot#1, test RAM stick #1 in this slot.
4. If you find a stick that passes the test, test it in all the other motherboard slots.

If Part 2 testing shows errors, and all tests in Part 3 show errors, you will need to test the RAM sticks in another computer and/or test other RAM in your computer to identify the problem.

In this way, you can identify whether it is a bad stick of RAM, a bad motherboard, or incompatibility between the sticks.




   Information
Errors are sometimes found after 8 passes.



   Tip
Do this test overnight, before going to bed.


Software:

System Optimisers

Please remove the following software

Code:
Start Menu\Programs\Free Window Registry Repair Public:Start Menu\Programs\Free Window Registry Repair Public

These programs tend to cause BSOD-s. The windows 7 operating system does not require these registry cleaning software. They often tune-down rather than tune-up and can wreck the OS beyond repair. Microsoft have improved Windows 7 significantly and it is much better at organising and optimising itself than its predecessors. Check this, this and this thread for evidence.

If you feel the need to use a registry cleaning or optimisation software, most of us recommend the use of CCleaner - PC Optimization and Cleaning - Free Download but make sure you back up the registry before making letting ccleaner delete anything.

AVG is not the best security software. Please uninstall it for testing purpose:AVG | Download tools and utilities
Microsoft Security Essentials. Recommended from a strict BSOD perspective, compatibility & stability compared to other antiviruses/internet security software. It is free and lightweight:-
Microsoft Security Essentials - Free Antivirus for WindowsMalwarebytes : Malwarebytes Anti-Malware removes malware including viruses, spyware, worms and troj... Read more

http://www.sevenforums.com/bsod-help-support/271848-bsod-started-bf3-now-getting-0x0000001a-error.html
Relevancy 44.72%

I was having BSOD's for a couple of months, finally got time to look into it. I had two dead hard drives inside my case, still connected. I assumed they were the culprit for the BSOD's, but i've removed them.

I also migrated my c drive to an SSD. my original master drive had a c and d partition. i'm still running the drive, just with the original c: unmapped.

I've been running Driver Verifier, that has caused some BSOD's.

I upgraded my nvidia drivers yesterday, which seemed to stop the BSOD's. I left my machine on overnight successfully without a BSOD last night. but ever since when i've rebooted into non-safe-mode i'm getting more failures.

i've also run malwarebytes over my machine and i'm clean.

I'm investigating DDU v13 and VIPRERescue, which i've found through this forum and i'm about the run them

Attached are my SF logs, any help would be greatly appreciated.

Thanks,
Matt

A:Assortment of Different BSOD's - Started off with BAD_POOL_HEADER

still having issues. Here is DM log.

i ran sfc /scannow overnight with no issues found.

http://www.sevenforums.com/bsod-help-support/344966-assortment-different-bsods-started-off-bad_pool_header.html
Relevancy 44.72%

I used to to Win MEMORY_MANAGEMENT after started upgrade 10 BSOD have Windows on this system with no issues After upgrading to Windows several buggy things started occurring During the upgrade process and afterwards every time I booted the system it would halt BSOD MEMORY_MANAGEMENT started after upgrade to Win 10 on a blue screen and say The Digital Signature of a file could not be verified windows system drivers Tpmx sys Error system code Oxc B I would have to hit F to change startup options and then choose option quot Disable driver signature enforcement BSOD MEMORY_MANAGEMENT started after upgrade to Win 10 quot which would allow it to continue booting up It began to show a pop-up window every time upon logging into Windows that said quot The SoundMAX audio driver did not load You may need to re-install SoundMAX quot The BSOD events also started happening There has been no particular program or activity that seemed to cause it It happens both when I'm at the computer and when it's idle It seems to happen every - days on average I decided to do a clean re-install of Windows hoping it would clear up the issues It did eliminate issues and but not the BSODs It's always been the MEMORY MANAGEMENT error message both before and after Windows re-installation I did Memtest for passes and no memory errors occurred In addition I never had any BSODs previously with Windows so I'm pretty confident it's not the physical memory I am attaching the zip file as well as the results from running WinDbg on the two most recent MEMORY DMP files I used the BlueScreenView program to look at the minidump files and with all of them the driver in the stack at the time of the error is ntoskrnl exe In amongst all the WinDbg output it says ADDITIONAL DEBUG TEXT Memory Manager detected corruption of a pagefile page while performing an in-page operation The data read from storage does not match the original data written This indicates the data was corrupted by the storage stack or device hardware Hopefully I've collected enough info that someone can help me finally figure this bugger out Thanks in advance

A:BSOD MEMORY_MANAGEMENT started after upgrade to Win 10

Hi Fonebone,

Welcome to the 10forums.

Please update the drivers of your NoMachine Microphone adapter audio device
Driver Reference Table - nxaudio.sys

0x1A is a little wide, because the memory management goes very deep, but as the dumps say the corruption was caused by either drivers or hard drive.





This indicates the data was corrupted by the storage stack, or device hardware.



As usual the 0x1A crashes do not reveal any driver possibly causing it, forcing the use of driver verifier to attempt to find any driver.
If driver verifier doesn't crash your system after 48h, stop driver verifier and run hard drive tests.


Diagnostic Test

 DRIVER VERIFIER

   Warning
Please make a backup of your important files and get your rescue media or create one.
Please create a restore point.
Please follow this tutorial to run driver verifier.

Driver verifier stresses your drivers and will crash your pc if any driver fails due to a violation.

Driver verifier should be performed for a max of 48 hours, or when you have a bluescreen, whatever comes first.

If driver verifier has found a violation and you can't get back into windows normally, try to boot into safe mode and reset in safe mode driver verifier, or in the troubleshooting options open command prompt and type verifier /reset.


   Note
Your system will act very sluggishly while driver verifier is enabled, this is normal as your drivers will be being subjected to heavy testing in order to make them crash.


Diagnostics Test

 HDD TEST

Run SeaTools to check the integrity of your HDD. SeaTools for DOS and Windows - How to Use - Windows 7 Help Forums
Run following tests
Short Drive Self TestShort genericLong generic
If the short generic fails, no need for the long generic.

   Note
Do not run SeaTools on an SSD as the results will be invalid.

Run chkdsk
Disk Check - Windows 7 Help Forums

Run HDTune to
scan for errors, no quick scan but full scancheck the health,benchmark.
It may take some time, but please take the time you need to perform it properly.
Let me know what the results are
of the error scan,make a screenshot of the health of every hard drive and post the screenshots,post screenshots with the benchmark of the
transfer rate,access time,burst rate,cpu usage.

http://www.tenforums.com/bsod-crashes-debugging/38759-bsod-memory_management-started-after-upgrade-win-10-a.html
Relevancy 44.72%

My PC was running fine until yesterday and I'd finally got DCS World running OK but then I disconnected my nd HDD which was too slow for DCS and was throwing up UDMA CRC started crashing/BSOD Suddenly errors possibly due to the e-SATA enclosure it's in and since then I have Suddenly started crashing/BSOD DCS crashing BSOD AMD Fuel service crashing and just now a BSOD referring to Memory Management whilst editing a text file I've had my Phenom II X OC'd to Ghz for Suddenly started crashing/BSOD ages and I just tested Suddenly started crashing/BSOD it's stability with OCCT so I don't think that's the problem it's well cooled with a TRUE rev c and doesn't go above c anyway My GB DDR has been running at Mhz with the NB at Mhz with CPU-NB and NB at v for just as long so I don't see why that should suddenly be the problem I've reset the NB to Mhz and Auto voltage for now though I disabled e-SATA in the BIOS after I disconnected that drive but I can't see that would be causing problems I uninstalled PhenomMSRTweaker just in case but the last crash happened after I'd done that and rebooting so it doesn't seem connected I've haven't seen a popup about FUEL but this is the log entry Code Faulting application name Fuel Service exe version time stamp x f e d c Faulting module name Device dll version time stamp x f e b Exception code xc Fault offset x c Faulting process id x Faulting application start time x cd d ae ce Faulting application path C Program Files ATI Technologies ATI ACE Fuel Fuel Service exe Faulting module path C Program Files ATI Technologies ATI ACE Fuel Device dll Report Id b b-fcdf- e -bc - c a ffda and iexplore Code Faulting application name iexplore exe version time stamp x ce Faulting module name mshtml dll version time stamp x fea d c Exception code xc Fault offset x Faulting process id x b Faulting application start time x cd de e Faulting application path C Program Files x Internet Explorer iexplore exe Faulting module path C Windows SysWOW mshtml dll Report Id b c af -fcd - e -bc - c a ffda there's others for CCC svchost exe and NET in there but I don't suppose they're particularly useful My PSU is Antec CP- and my GPU GB with Accelero Xtreme III so that never gets hot either My motherboard is MSI FXA-GD

A:Suddenly started crashing/BSOD

Turns out one of my 4GB Corsair Vengeance LP sticks has gone bad, so I'll have to get the pair replaced. I'll need to buy some RAM so that I can use my system in the meantime, so it's a good excuse to upgrade to 16GB I guess ;)

http://www.techsupportforum.com/forums/f299/suddenly-started-crashing-bsod-665460.html
Relevancy 44.72%

Hi there,
Around a month ago my screen started turning black at seemingly random times, but the power light on the tower stayed on. Recently, the screen has started turning to a BSoD after turning black. Details of the system are below, along with the requested files in the posting instructions.
System Spec:
Windows 7 Home Premium 64bit
Original OS
OEM
10 months old
OS not re-installed
6144 MB RAM
Intel Core 2 Quad CPU Q8300 @ 2.50 GHz (4 CPUs)
NVIDIA GeForce GT 320

Thanks in advance for taking a look and/or helping me out here.

A:BSoD Problems, started around a month ago

  
Quote: Originally Posted by Stormchaser109


Hi there,
Around a month ago my screen started turning black at seemingly random times, but the power light on the tower stayed on. Recently, the screen has started turning to a BSoD after turning black. Details of the system are below, along with the requested files in the posting instructions.
System Spec:
Windows 7 Home Premium 64bit
Original OS
OEM
10 months old
OS not re-installed
6144 MB RAM
Intel Core 2 Quad CPU Q8300 @ 2.50 GHz (4 CPUs)
NVIDIA GeForce GT 320

Thanks in advance for taking a look and/or helping me out here.



No DMP file included in upload try this method


To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

The procedure:

* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.

To ensure minidumps are enabled:

Go to Start, in the Search Box type: sysdm.cpl, press Enter.
Under the Advanced tab, click on the Startup and Recovery Settings... button.
Ensure that Automatically restart is unchecked.
Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
OK your way out.
Reboot if changes have been made.

http://www.sevenforums.com/bsod-help-support/166075-bsod-problems-started-around-month-ago.html
Relevancy 44.72%

I have been getting this BSOD error a few minutes after I start my computer and it has been really annoying me, don't know what to do about it.

I hope you guys can help me, I have attached the files needed.

Thanks (:

A:BSOD error few minutes after pc started

Also I got this message, don't know if it helps:

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033

Additional information about the problem:
BCCode: d1
BCP1: FFFFF8800D668000
BCP2: 0000000000000002
BCP3: 0000000000000000
BCP4: FFFFF88010292264
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1

Files that help describe the problem:
C:\Windows\Minidump\092812-16738-01.dmp
C:\Users\Yves\AppData\Local\Temp\WER-32105-0.sysdata.xml

http://www.sevenforums.com/bsod-help-support/255442-bsod-error-few-minutes-after-pc-started.html
Relevancy 44.72%

Hello I got my first BSOD on the th of this month I just started up my PC it gave me the BSOD I restarted and it didn't happen again and everything was fine until today I went to work got home and noticed my computer was loading things on my browser very slowly I did a restart and got a BSOD I ran the repair recommended by Windows and it didn't do anything helpful After it restarted from there I didn't get the BSOD but my internet speed seemed to be running very oddly BSOD started now randomly consistent. I was on a Skype call and it was just fine however loading websites took way too long and BSOD started randomly now consistent. when I tried to download BSOD started randomly now consistent. files it was really slow MB files said would take hours Anyway after a few more restarts BSOD started randomly now consistent. I finally started to get the BSOD after I was loaded into my profile for about a minute I am currently booted into safe mode with no problems so far I ran bluescreenview and it said ntoskrnl exe was the driver causing the problems but I read that that is a default driver However the blue screens I received after loading into my profile came up with HIDCLASS SYS as the error I saw that it could be caused by USB or bluetooth driver I just find this whole thing odd because I had one BSOD on startup on the th then nothing all the way until today and now the new BSODs that are coming up after I load into my profile Add the slow browser internet and I have no idea what's going on Sorry for the novel I just wanted to be as descriptive as possible I was planning on just re-installing Windows but I thought I'd throw this up here in case there was an easier fix you folks found Thank you

A:BSOD started randomly now consistent.

Please disable driver verifier: Driver Verifier - Enable and Disable. Do not enable it until you are requested to.

Security App

Microsoft Security Essentials and Malwarebytes are recommended from a strict BSOD perspective. They do not cause blue screens on the system as other AV products do.

Microsoft Security Essentials, Free antivirus for windows and Malwarebytes Anti-Malware Free



   Information
Do not start the free trial of MalwareBytes, unselect that option when prompted.
Update and make full scans with both separately.


Scan your system with the following:

Kaspersky TDSSKiller - How to remove malware belonging to the family Rootkit.Win32.TDSS (aka Tidserv, TDSServ, Alureon)

ESET online scanner - One-time virus scanner free with ESET online scanner

Start up

Keep less stuff at the start-up. Only anti-virus, this helps avoid driver conflicts and improves time to log in to windows.
Troubleshoot a Problem by Performing a Clean Startup in Windows 7 or Vista
How to Change, Add, or Remove Startup Programs in Windows 7

Hard Drive/Storage

Post disk summary using CrystalDiskInfo software: CrystalDiskInfo Standard Edition
For how to upload a screenshot or file, read here
Make a hard drive test from the hard drive manufacturers website: Hard Drive Diagnostic Procedure

For errors on your Hard drive(s): How to Run Disk Check in Windows 7

System Temperature

Ensure that there are no heat issues, For monitoring heat of the system use Speccy or HWMonitor

Memtest86+

Run Memtest86+ for at least 8-10 passes. It may take up to 20 passes to find problems. Make sure to run it once after the system has been on for a few hours and is warm, and then also run it again when the system has been off for a few hours and is cold. How to Test and Diagnose RAM Issues with Memtest86+



   Note
Pay close attention to part 3 of the tutorial in order to rule the faulty RAM stick out.



   Tip
Do this test overnight.

SFC /scannow to check windows for corruption:

How to Repair Windows 7 System Files with System File Checker
1. Click Start
2. In the search box, type Command Prompt
3. In the list that appears, right-click on cmd.exe and choose Run as administrator
4. In the command window that opens, type sfc /scannow

http://www.sevenforums.com/bsod-help-support/294267-bsod-started-randomly-now-consistent.html