Windows Support Forum

Computer freezes, requiring hard reset

Q: Computer freezes, requiring hard reset

Hello im quite new to this forum so Computer freezes, reset hard requiring please be patient with me Im decently tech suavy able to do my own hardware and software upgrades and identify some problems but still learning My computer is just over a year old and it began acting up Computer freezes, requiring hard reset nearly a month ago The problem occurs during gameplay I only currently have games on Computer freezes, requiring hard reset my computer WoW and CoD MW and during both games and no given specific time the computer freezes and the monitor loses signal I have recently noticed that during this freeze I still receive audio which makes me think it has something to do with the video card My specs are as follows Processor Intel Core Quad CPU Q GHz Ram GB bit Operating system running on Windows Vista w service pack I have a newly installed PSU about months old running at amps i believe And a GeForce GTX Video card installed around the same time as the PSU If you could help me with my situation in any way it would be greaty appreciated nbsp

Relevancy 100%
Preferred Solution: Computer freezes, requiring hard reset

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Computer freezes, requiring hard reset

Ive recently installed Speedfan, and am now noticing my GPU runs at 65C whilst no games are running... any tips on getting this down? (Not a laptop)

http://www.techspot.com/community/topics/computer-freezes-requiring-hard-reset.156649/
Relevancy 17.2%

I sometimes wonder about techs using tools such as Seatools, HDD regenerator etc to diagnose/repair hard drives. Do any of these tools beat Chkdsk in any way?
(besides data recovery tools, I guess those have no match in Windows).

Thank you
 

A:Do you need more than Windows default tools to check/repair a hard drive?

IMO, always use the tool provided by the vender. At the time you need this tool, you don't need a 3rd party screw-up to 'help you' really mess it up.
 

http://www.techspot.com/community/topics/do-you-need-more-than-windows-default-tools-to-check-repair-a-hard-drive.217548/
Relevancy 13.33%

After going through lots of programs and cleaning out an infection, I restarted it and it is almost totally unusable. I can confirm that both mouse and keyboard work, mouse light is on, and keyboard lets me open the calculator. Any help please? Thanks.
 

A:Can't move my mouse, but computer is not frozen

If the mouse is USB (not a PS/2 connection), try disconnecting and then reconnecting. You could also try a different USB port for the mouse.
 

http://www.techspot.com/community/topics/cant-move-my-mouse-but-computer-is-not-frozen.183253/
Relevancy 13.33%

Hi, I have decided to buy a new computer(or the parts for one).
It will be the first time I assemble one so I would like a little
help from the people on here that has some experaince with computer hardware,
because I myself do not know very much about it.

I have done some research and this is what I came up with:
Motherboard : Asus Z97-A Intel Z97 4xDDR3 SLI CrossFireX Socket 1150 ATX
CPU : Intel Core i5-4460 3.2GHz Socket 1150
RAM : Crucial Ballistix Sport DDR3 DIMM PC12800/1600MHz CL9 2x4GB
GPU : Gigabyte GeForce GTX 750Ti OC 2GB D
PSU : CORSAIR PSU 550W VS550
Hard Drive : Western Digital WD20E, 2TB, SATA 6 Gb/s, 3.5", IntelliPower, 64MB

What I want to know is if all these parts will fit together and if it is a good
computer? I want a fast computer thats good at a bit of everything. What I will be using it for mostly is programming, games like bfbc2, downloading/watching movies/tv series and just browse the internet.

And I think I will be using mint as my os(still new to linux).
 

A:Assembling a computer for the first time

I think those are great choices.
 

http://www.techspot.com/community/topics/assembling-a-computer-for-the-first-time.217526/
Relevancy 16.77%

I've said time and time again that solid state drives are the future but the truth of the matter is, traditional spinning disks still have a place inside a modern PC as a storage / backup drive. The question then becomes,...

Read more
 

A:Latest hard drive reliability data reveals it may be best to avoid 3TB drives

Well I'm glad I have never bought a Seagate HD. I usually buy Western Digital, except my SSD is Samsung.
 

http://www.techspot.com/community/topics/latest-hard-drive-reliability-data-reveals-it-may-be-best-to-avoid-3tb-drives.208285/
Relevancy 13.33%

I just bought these I will return them if need be so don t pamper me http www newegg com Product Product aspx Item N E Question one these Questions about computer speakers speakers plug into my old jack front speaker port on my mobo should I use the center sub-woofer port instead Should I have bought some kind of HDMI or SDPIF speakers instead If so how much better are they My video card nvidia has extra hdmi ports my Questions about computer speakers mobo has a spdif port Should I buy sound card speaker combo Is my mobo and or video card just as good as a good sound card Should I download some software to compliment my new speakers Do I need to change any settings on my computer to take advantage of them In the control panel should I up the quot quality quot from bit hz studio Virturilze sound Boost enhance Will loudness equalization hurt my coolness nvidia g gaming http www newegg com Product Produ e nvidia g gaming- - - - - -Product Mobo z m pro http www newegg com Product Produ amp cm re z m pro - - - - - -Product p s my old speakers were like years old I don t even see where to adjust the bass p s s I use my speakers for music and gaming ps was trying to spend on a speaker upgrade flac is wow nbsp

http://www.techspot.com/community/topics/questions-about-computer-speakers.217390/
Relevancy 26.23%

I have an old Toshiba laptop and it is unusable and I was wondering if there was a way to factory reset it without a disk.

Model # - psk2cu-s5150
 

A:Reset My Laptop

I believe there's a partition that contains the OEM setup, but you need a CD (any) and to recover from the Restore partition
 

http://www.techspot.com/community/topics/reset-my-laptop.217201/
Relevancy 15.48%

Hello I have a Dell Inspiron laptop I have an image of the entire hard drive that I created when I first got the computer using Acronis TrueImage and I d like to restore that image returning the laptop back to that fresh clean original state I ve done this two or three times before and it worked great each time But now there s a problem Normally I would in boots as when drive external but laptop hard Primary recognized isn't drive used connect to the laptop a USB storage backup drive that has the disk image boot the laptop from a Rescue Media CD created by Acronis then restore that disk image from the back-up drive onto the laptop s HDD When I tried it this time round the laptop s HDD was not listed in TrueImage at all I created a new rescue media disk tried it again and got the same result I then took the HDD out of the laptop connected it to Primary hard drive boots in laptop but isn't recognized when used as external drive an adapter kit that let s you power up and plug in the drive via a USB port and external power supply and tried the same procedure using my desktop to run the operation Same result The drive was not detected by Acronis The drive does not seem to spin up at all Primary hard drive boots in laptop but isn't recognized when used as external drive when it is connected Keep in mind the drive still works when installed in the laptop -- it boots into Windows XP etc When I plug the drive into my desktop the drive does not show up in Disk Management Start Right-click My Computer Manage Disk Management It doesn t show up in either of the two right-side windows so there s no way I know of to format it or do any work on it in Windows When I go to Device Manager Disk Drives I see quot USB Device quot for that drive and under Properties it is listed as quot Disk Drives quot for quot Device Type quot and its status says it is working properly So what I don t get is it works fine when it is in the laptop boots into XP etc but when connected as an external drive or when the laptop is being run off of CD the drive can t be detected and not on just one computer but multiple Is it junk Any ideas nbsp

A:Primary hard drive boots in laptop but isn't recognized when used as external drive

It's a power issue. Had the same issue taking a 2.5" laptop hdd and attempting to hook up w/ a passive usb sata hdd cable. my recommendation is to use a powered usb sata cable. like this one: http://www.newegg.com/Product/Product.aspx?Item=N82E16812119475 having proper power will allow the USB bus to detect and power the hdd correctly. Hope this helps, take care!
 

http://www.techspot.com/community/topics/primary-hard-drive-boots-in-laptop-but-isnt-recognized-when-used-as-external-drive.174938/
Relevancy 13.76%

Memory is a key component in any computer and without a sufficient amount on tap, the entire system will feel sluggish regardless of what other beefy hardware you might be running.

Read more
 

A:How much RAM is in your computer?

16GB... Because I love keeping numerous Chrome tabs open.
 

http://www.techspot.com/community/topics/how-much-ram-is-in-your-computer.213529/
Relevancy 12.9%

Just checking it seems like something is not wife's on this - my Keyboard - - found disabled getting computer of EPP tired still wrong on this computer just using a standard plain usb keyboard All of a sudden this morning when she was changing a plain ordinary mouse the keyboard quit working it works on Keyboard not found - EPP - disabled - getting tired of this on my wife's computer another computer the mouse works while using the same usb port in device manager there is no entry for Keyboard in devices and printers way down at the bottom a quot usb multimedia quot keyboard shows but when I try to look at the drivers there are several drivers and I cannot delete or disable any Looking at the HID compliant consumer control device driver details there are no drivers Device Manager Keyboard shows keyboard there are speed settings but in the hardware tab no name manufacturer location or device status Just in case with all of the problem we have had lately I did some scans the dss scan seems strange Is it mbam Windows Service Pack x NTFS Internet Explorer Motherboard FOXCONN Keyboard not found - EPP - disabled - getting tired of this on my wife's computer AB Processor AMD Phenom tm II X T Processor CPU mhz Disk Partitions C is FIXED NTFS - GiB total GiB free D is FIXED NTFS - GiB total GiB free E is CDROM F is Removable G is Removable H is Removable I is Removable J is Removable K is CDROM M is NetworkDisk NTFS - GiB total GiB free P is NetworkDisk NTFS - GiB total GiB free R is NetworkDisk NTFS - GiB total GiB free S is NetworkDisk NTFS - GiB total GiB free T is NetworkDisk NTFS - GiB total GiB free Something is rotten in Denmark nbsp

A:Keyboard not found - EPP - disabled - getting tired of this on my wife's computer

Some place I saw a message that windows updates was set to no update hareware files, but I can't find where to change that.
 

http://www.techspot.com/community/topics/keyboard-not-found-epp-disabled-getting-tired-of-this-on-my-wifes-computer.191043/
Relevancy 12.9%

I have scoured the internet for months, and I couldn't find anything. I even checked an old article from this website, which didnt help. I have tried most obvious things, such as disabling stereo mix, though and help at all is accepted because you never know. Thanks.
 

http://www.techspot.com/community/topics/turtle-beack-x12-replaying-computer-sounds.216239/
Relevancy 13.33%

Hello I have a tower just recently bought all the parts from newegg and was building the tower for the last days I had everything put in as it should be and initially it stayed on but no image was portraying problems up boot Building computer on the monitor A friend explained I was using the wrong port to portray image as it should be through the video card I should be connecting it but after troubleshooting the problem Building computer boot up problems initially I removed RAM and put it back in but computer now turns on for a second then right off I hear and see the fans running the dvd drive spinning and the lights go on but then it shuts right off after another - seconds it turns on again and then after another second turns right back off in an endless cycle until I turn it off completely and unplug it Not sure what the next steps are or if I should return the moba for an exchange After reading a lot of forums I noticed that it could be the RAM was improperly placed so I tried many times to take it out and put it back in but same problem keeps occurring I hear no beeps and only hear a click from the power supply when it goes on I tried the psu tester on the power supply and it tells me it should be working fine Any one have any idea moba ASRock Z M Pro Micro ATX Intel Motherboard ram CORSAIR Vengeance GB x GB -Pin DDR SDRAM DDR PC Desktop Memory Model CMZ GX M A C B power EVGA -G - -XR W Power Supply case Thermaltake Level Series Level GT VN W N Black Computer Case processor Intel Core i - K GHz LGA BX I K Desktop Processor video card EVGA GeForce GTX Ti G-P - -KR FTW w ACX Cooling Video Card Please someone help and thanks to all nbsp

A:Building computer boot up problems

Okay, I've had the same issue with a new build: Put it all together, switch on the power and basically nothing. Do the following tried and true diagnostic steps that can be tedious but costs nothing to do and can often zero in on your issue:

1. Uninstall everything from your motherboard and disconnect all peripherals from your power supply except psu to motherboard, cpu, and one stick of RAM. Now turn it on. If it boots up and stays booted then shut it down and then...

2. Add your second stick of memory -- nothing else. Repeat by booting up and if it stays booted up then...

3. Start adding one piece of hardware at a time and repeat as directed.

What are your findings?
 

http://www.techspot.com/community/topics/building-computer-boot-up-problems.215853/
Relevancy 17.63%

Today, my external hard drive has not appeared on my PC. It did work before I went to sleep yet when I began my PC in the next morning, it didn't show. Can you please help me how to fix this?
 

A:External hard drive not showing up on my PC

Hello there,

There are a lot of different reasons for an HDD to stop showing. A few things you can try are:

Try using a different USB cable, make sure it is as short as the original one, or even shorter. This is important it terms of providing enough power for the drive to function properly.

Try connecting it to different USB ports.

Try connecting it to a different PC.

Sometimes the drive can misbehave due to insufficient power even if it appears to be spinning make sure you connect the HDD directly to the USB port and not through a USB hub.

Check if you can see the HDD in Windows Device Manager and in Disk Management. Good luck.
 

http://www.techspot.com/community/topics/external-hard-drive-not-showing-up-on-my-pc.209548/
Relevancy 12.9%

I heard there's some certification to mount ESD safe equipment (ESD mats, etc) at computer workshops and other ESD safe environments. Could I get this certification myself in London? Is it expensive?
 

A:Is there some certification to mount ESD safe equipment at computer workshops, etc?

See https://www.esda.org/
OR domestic (U.S) http://www.dekra-certification.us/en/electrostatic-discharge-esd
 

http://www.techspot.com/community/topics/is-there-some-certification-to-mount-esd-safe-equipment-at-computer-workshops-etc.214706/
Relevancy 17.63%

Dear frnds,

I have been using my external hard disk(WD My Passport Essential SE) 1 Tb, since last 6 months, but after a recent virus scan, my laptop is not showing the external hard disk, i have tried using My computer, Manage and Disk management.

I am unable to find external hard disk even in Disk management i.e. it is not showing.
So please can anyone help me in this concern......
I would really appreciate and thanks in advance
 

A:Problem with my external WD 1TB My Passport hard disk

First, try accessing it from another computer to be sure it can be accessed elsewhere. The Western Digital Passport Essential has had a pretty high failure rate as seen in our shop... so the unavailable external hard disk may not have anything to do with the virus scan may have nothing to do with the problem.

In other cases, I would attempt to reinstall the Passport drive. You do not usually cause any damage to the data on the drive when you do this.
 

http://www.techspot.com/community/topics/problem-with-my-external-wd-1tb-my-passport-hard-disk.176021/
Relevancy 12.9%

So I'm building a coomputer for my first time and have already selected parts that I think would be good. Not sure though as this is all new to me, but basically I just want a good computer capable of running a flight simulator in high quality graphics. So I just want to make sure that everything is compatable with each other, and if you have a part that would be better than what I have listed, please recommend. The list of parts I have come up with are as follows:

Case: Xigmatek Soundwave ATX Mid Tower

Power Supply: Cool Power Performance CP P600 204 pin ATX Power Supply w SATA PCIe & Dual 12V Rails

Mobo: MSI ATX DDR3 2133 Motherboard 970 Gaming

CPU: AMD FX 4350 Unlocked Quad Core Processor 4.2 4

RAM: Corsair Vengeance 8gb (2 x 4gb) DDR3 1600 MHz PC3 12800 240-Pin DDR3 Dual Channel Memory Kit

Optical Drive: Asus 24x DVD-RW Serial-ATA Internal OEM

Audio Drive: Asus Xonar DG Headphone Amp & PCI 5.1 Audio Card

Video Card: MSI GTX 960 Gaming 4G

Hard Drive: Western Digital Caviar Blue 500gb SATA III 7200 RPM 16mb Cache Bulk/OEM

Then I will be installing Windows 7 Home Premium.

Thanks Guys!
 

A:Are these parts sufficient for a decent gaming computer?

Give us your budget.
 

http://www.techspot.com/community/topics/are-these-parts-sufficient-for-a-decent-gaming-computer.214561/
Relevancy 17.2%

Hi

Thanks for any help in advance..

I own a WD MyBook 4TB hard drive, which I've used on Windows for the past 2 years. I got a macbook last week and hooked the drive into it, some error message came up so I figured it wouldn't work, however when I went to plug it back into my windows machine I got the "USB device not recognised" message, the laptop is windows 8. I then tried it on my fathers windows xp computer and it seemed to think it was a completely new hard drive..

I've done some googling on it but I just wanted to ask here incase I went formatting it by mistake or anything..any advice/help would be greatly appreciated.

Thanks
 

A:External USB hard drive not recognised on Windows after plugging it into a Mac

Sounds like you made some procedural error, allowing the Mac to alter the partition - - bad choice.

Using Windows tools, examine the partition on that drive - - should show up as
somelabel (dl): size HTFS
Healthy (other qualifiers)​
Try Control Panel ->Admin Tools->Computer Mgmt->Disk Mgmt
 

http://www.techspot.com/community/topics/external-usb-hard-drive-not-recognised-on-windows-after-plugging-it-into-a-mac.200827/
Relevancy 17.63%

Hi I have a few questions about my external hard drive. I play games and I noticed that my internal hard drive was getting full so I bought a new external hard drive. I was wondering if I backed up my internal hard drive to my external one and then formatted my internal hard drive, would I have to re install everything or would I be able to access my games and such. Thanks for your time its much appreciated.
 

A:External Hard Drive

You would have to e-install all of your games, and applications, and windows updates
 

http://www.techspot.com/community/topics/external-hard-drive.213122/
Relevancy 13.33%

ASUS ROG G751JY-DH72X Intel i7 2.40GHz 32GB Memory 512GB SSD GTX 980M 4GB Laptop

Windows 8.1
Intel Core i7 4860HQ 2.4GHz
32GB Memory 1TB HDD 512GB SSD
NVIDIA GeForce GTX 980M 4GB
17.3-inch (1920 x 1080)
Retail Price:
$2,999.00
Price:
$2,749.00
 

A:Is the CPU good on this computer for gaming?

I'd say it's a good CPU, but note that you won't be able to upgrade it in the future as it is soldered onto the motherboard.
 

http://www.techspot.com/community/topics/is-the-cpu-good-on-this-computer-for-gaming.213433/
Relevancy 16.77%

I have a three month old Dell Dimension GHZ P Gig Ram and a gig SATA Hard Drive When I got the computer I used the files and transfer PC Relocator utility And had in Error system drives did hard Message: disk find Setup not your installed any a bunch of unwanted extras that came with it I m having a Satellite Internet system installed and they wanted a clean install of windows XP So I opened the owner s manual and got out the reinstallation disk and the problems began By the way Dell tech support s only response has been to say gee that s not right and would send a tech sometime after Christmas Anyway heres step by step what I did I boot to the Dell reinstallation disk Error Message: Setup did not find any hard disk drives installed in your system The windows setup screen appears and loads files The next screen says welcome to setup and offers three options -to setup XP press enters To repair XP press R to exit without installing XP press F I press enter and the following message comes up Setup did not find any hard disk installed in your computer Make sure any hard disk drives are powered on and properly connected And any disk related configuration is correct ect Press F to quit It dose this if I try repair also Dell had me check the connections to the HD and Motherboard They re good And debug the hard drive No luck Everything worked fine until I put in the reinstallation disk Any help would be welcome nbsp

A:Error Message: Setup did not find any hard disk drives installed in your system

During Setup, it will ask you if you need any extra drivers such as SCSI (or SATA in your case). If so, press F6. Now you are in trouble, because SATA drivers come on a floppy and new(er) Dells don't have a floppy anymore. Borrow a floppy-drive from another PC and install that in your Dell.
Setting up with the Dell disks, I'm not sure if they are RESTORE-disks or full XP-disks.
That may cause another problem.
 

http://www.techspot.com/community/topics/error-message-setup-did-not-find-any-hard-disk-drives-installed-in-your-system.18329/
Relevancy 17.2%

Guys I need all the expert help I can get I ve got a Western Digital quot My Book quot i think it was called that that has had every picture that me and my girlfriend have ever corrupt drive hard photos All on newborn external taken including when we first met holidays pets and most importantly pictures of All newborn photos corrupt on external hard drive my girlfriends pregnancy and s of photo s of our month old son that have all gone missing and even some other photo s that still show the thumbnail image don t open because I get an error saying that photo s are corrupt or damaged my girlfriend is already going mad and I don t know what software to get them back At present i ve tried opening with different picture veiwers like photoshop no luck I ve tried EASEUS Photo recovery software but then cancelled because I read that Recova could do a better job turns out recova doesn t work on external drives NOW NOTHING WILL OPEN ON THE EXTERNAL HDD I need some expert advise on what program WORKS to try and recovery these files A S A P because otherwise we will be devistated I don t wanna buy loads diferent software only to find that i m doing more damage nbsp

A:All newborn photos corrupt on external hard drive

try pc inspector file recovery. http://www.snapfiles.com/get/smartrecovery.html

ALWAYS back up photos to more than one device.
 

http://www.techspot.com/community/topics/all-newborn-photos-corrupt-on-external-hard-drive.156964/
Relevancy 13.33%

I have a HP Pavilion Elite m9600t CTO Desktop PC that has 2 drives. One which clearly says it can do lightscribe and burning, however, everytime I try to burn a disk using any software(I've tried a couple) it says no drive that can burn was found....

Config Flags 0x00000000
It's kinda driving me crazy to the point where I'm not sure if I'm wrong or its wrong. Here are the drives I have:

Drive 1

Spoiler
ATAPI DVD D DH16D3S
Device ID IDE\CDROMATAPI_DVD_D__DH16D3S____________________SH12____\4&A9C04EF&0&0.1.0
Status 0x0180200a Started
Problem 0x00000000 (0)
Service wd
Capabilities 0x00000000
Class CDROM
Manufacturer (Standard CD-ROM drives)
Drive 2

Spoiler
WJWDG UBKDE3C5U3 SCSI CdRom Device
Device ID SCSI\CDROM&VEN_WJWDG&PROD_UBKDE3C5U3&REV_1.03\5&36E5972&0&000000
Status 0x0180200a Started
Problem 0x00000000 (0)
Service cdrom
Capabilities 0x00000060
Config Flags 0x00000000
Class CDROM
Manufacturer (Standard CD-ROM drives)

 

A:My computer can't burn disks?

They both appear to be ROM drives when reading the spoiler info.

The best I can tell, here is the "ATAPI DVD D DH16D3S" which is a ROM drive.

http://www.newegg.com/Product/Product.aspx?Item=N82E16827106262
I can not find the second listing with the details provided. I'm assuming that is the drive pictured in the screenshot.

HP Pavilion Elite m9600t Desktop PC Product Specifications




Primary Optical Drive

Must select one of the following options:

16X DVD(+/-)R/RW 12X RAM (+/-)R DL LightScribe SATA
Blu-ray player & SuperMulti DVD burner with LightScribe Technology
SuperMulti Blu-ray Disc burner with LightScribe Technology
​Click to expand...

There is lack of detail on HP's site as to which specific drives were used. The drive you pictured is not Blu-ray, so I'll assume the first listed drive is the one you have. The drive may need to pulled out of the case, to find out for sure which unit was used.
 

http://www.techspot.com/community/topics/my-computer-cant-burn-disks.212153/
Relevancy 13.33%

I recently moved my computer from one side of my desk to the other and somehow it managed to make it so when I press the power button nothing happens. I've disassembled and reassembled the computer numerous times and tested the psu. The psu is working and it seems like the motherboard is the culprit. What is confusing me the most is that when I short the 24 pin connector to the motherboard then plug it in if I also press the power button I can turn on the computer. I dont see that as a permanent fix just in case it sleeps and I assume it is not good for the computer so I am looking for help on how to permanently fix my issue. Thanks in advance.
 

http://www.techspot.com/community/topics/computer-will-not-power-on-after-i-moved-it.212377/
Relevancy 11.61%

I have scoured the from computer, sounds" can speakers "computing my hear my through I internet for a solution to this and have found nothing First my dxdiag is attached I have had this issue for over a year now and I am getting fed up If I put my ear to my pc I can hear computer noises coming from it I can not compare it to another sound as there is nothing else to compare it too it just sounds like my CPU or Hard Drive thinking That doesnt bother me though I expect my computer to make some noise HOWEVER I dont expect to hear it in my speakers too I have a lot of speakers and a lot of headphones no they are not I can hear "computing sounds" from my computer, through my speakers the problem Right now I am using a knappenberger tube hooked up to a GK MB just cuz I can When I plug in any speakers I can hear the CPU sound through them regardless of the volume level I can turn the speaker all the way down and yet the sound will come through This leads me to believe I can hear "computing sounds" from my computer, through my speakers it is a grounding issue or electrical to some degree I would like to try physically grounding my case to see if it would eliminate this God awful feedback However I can not find a guide as to I can hear "computing sounds" from my computer, through my speakers the best way to do this or any other suggestions So here I am Help me and earn my eternal gratitude Some notes If I unplug all of my cables except power and the speaker cable I still hear it if I plug in my speaker cable to my monitor instead of my PC I still hear it Front port still hear it I have yet to try a different sound card as I dont have one Once I find one I will update nbsp

A:I can hear "computing sounds" from my computer, through my speakers

Checked some settings in the Bios, noticed the sound isnt there while navigating it. Static started once windows loaded. Maybe it is some sort of issue with the hard drive
 

http://www.techspot.com/community/topics/i-can-hear-computing-sounds-from-my-computer-through-my-speakers.202182/
Relevancy 25.37%

Hello I need to connect power/reset buttons to dell optiplex 620, but I just can't connect them anywhere on motherboard.

I need help as fast as possible

Thank you
 

http://www.techspot.com/community/topics/dell-optiplex-620-connect-power-reset-buttons.212270/
Relevancy 13.33%

As the title implies I m currently having issues the first major issue is that my PC is turning on off and which the second is that my other hard drive suddenly up and Issue Invisible & HDD Computer Grounding disappeared on me My computer started to turn on and off on me for no reason while I was trouble shooting my initial problem of the HDD when I fiddled around inside my case Eventually ripping everything out of the case and quot card-boarding quot the motherboard which it worked and stayed on and as I gradually put everything back together it was all good until I sat the motherboard back onto the brass copper studs that sits inside the frame and screwed it in At that point my computer started to turn on and off again which lead me to believe it s some manner of a grounding issue Computer Grounding Issue & Invisible HDD I have no clue on what to do at this point about going about this should I just get a new case made of plastic My current full tower case is all steel While I was watching a movie which was stored on my second hard drive is started to freeze lag repeat all that good stuff on me It froze my computer up completely and I was force to hard reset the computer when I booted my PC back up I found that my second hard drive had up and vanished on me So I went into my bios and saw it quot working quot I switch to ACHI to see if it ll make a difference but I got a BSoD so I left it at IDE At that point my computer gave me the option to quot repair windoe files quot or start normally Both options made my computer get stuck on the loading screen thankfully safe mode boots up fine So what could had caused this and how may I go about fixing it nbsp

A:Computer Grounding Issue & Invisible HDD

I also swapped out the PSU with a spare I had lying around, didn't get any power from it so I reused my old one. Now I don't have power from that one either. So besides the "missing" HDD and a suddenly a "no longer working PSU "I'm assuming the motherboard is bad, opinions?
 

http://www.techspot.com/community/topics/computer-grounding-issue-invisible-hdd.211499/
Relevancy 17.2%

Hello I need urgent help with resolving this as I am trying to get the harddrive showing up or at least recover files by Hard Portable Drive External Slim detected Seagate PC not I was using it at school first and my computer froze so I shut down the Seagate Portable External Hard Drive Slim not detected by PC computer and restarted without safely removing Seagate Portable External Hard Drive Slim not detected by PC the hard drive at first the PC wouldnt reboot because I had it still plugged in after unplugging it and the PC loaded up it did not recognize the hard drive anymore I have tried it on several PCs including the one at home all using Windows and none of them recognize it I tried all USB ports on my PC and none of them work the light on the hard drive is ON so I know there is no connectivity issue I tried several free trial softwares even the ones by Seagate and none of them recognized the drive so I cannot use their tools for recovering files or detecting the hard drive When I check the Disk Management it does not show there When I check the Device Manager it does not show under USB controllers but it DOES show under Disk Drives I also checked and the drive is up to date The Model is BUP Slim BK In my quick launch the drive is recognized there and gives me the option to Eject it but it doesn t actually Eject it when I click on it it either stop responding or does nothing unless I manually unplug it EDIT After a really long time the Eject message says the device is already in use which is probably why it doesnt Safely eject nbsp

A:Seagate Portable External Hard Drive Slim not detected by PC

I am also having the same problem, as I need to get some stuff off my hard drive but it does not show up on any of it, was just wondering if you had found a way to fix this yet?
Kind Regards
 

http://www.techspot.com/community/topics/seagate-portable-external-hard-drive-slim-not-detected-by-pc.207640/
Relevancy 13.33%

Okay so I am having an issue working out if my case will be able to hold my motherboard and graphics card Case Details Available Color Black Materials Steel body plastic Dimension x x mm x x inch (I Computer Building my First setup) changed W x H x D Net Weight kg lbs M B Type Micro-ATX ATX quot Drive Bays exposed quot Drive Bays exposed hidden quot Drive Bays hidden I O Panel USB x int USB x Mic x Audio x supports AC HD Audio Expansion Slots Cooling System Front mm fan x optional or mm fan x Building First Computer (I changed my setup) optional Rear mm black fan x pre-installed Side left mm or mm fan x optional Side right mm fan x optional Building First Computer (I changed my setup) Power Supply Type Standard ATX PS EPS V optional Maximum Compatibility VGA card length mm inch with HDD cage CPU cooler height mm inch Now Ill list my other parts I have They should Building First Computer (I changed my setup) also be links if they are not links just search the name WD quot Green TB WD EZRX SATA M RPM HDD Patriot Signature GB Kit Gx DDR - - PSD G KH Samsung SATA x Black DVD RW Gigabyte N - GI N SL- GL DDR GT PCI-E VGA Card Intel BX G Pentium G GHz MB LGA ASRock H M Anniversary Motherboard nbsp

A:Building First Computer (I changed my setup)

From the case details you have supplied (Motherboard type: Micro ATX or ATX and maximum video card length of 320mm) you are well within the parameters of having everything fit.
ASRock H97M motherboard is a Micro ATX board.
Gigabyte N730-2GI video card is 185mm in length.
 

http://www.techspot.com/community/topics/building-first-computer-i-changed-my-setup.210947/
Relevancy 21.5%

Whenever I connect my external hard disk to my laptop, my computer freezes as soon as I My Computer to access it or click on 'Open to view files' in the autorun menu. I cannot do once this happens. Not even task manager can be opened. The computer unfreezes and starts working fine after I unplug my hard disk. But it works just fine on my friend's laptop.
This started happening a few days ago. Till then I could use the hard disk normally without any problems. Can anyone please help me out with this problem?
My operating system is windows 7 and I am using Avast Internet Security 7 antivirus
 

A:My laptop freezes when I connect an external HDD

What type of external HDD is it? Of what Brand?
 

http://www.techspot.com/community/topics/my-laptop-freezes-when-i-connect-an-external-hdd.180809/
Relevancy 13.33%

I have done some research and have not found a solution to my problem.

I plug in my HDD (Fantom Drive, Green Drive) and I hear the 2tone sound when I plug it into my USB2.0 port.
My computer then searches for a driver. It decides a suitable driver for what I plugged in is called "Initio Default Controller". I got this information from the Device Manager.
I have looked in my "computer and right clicked "manage". The HDD is not listed. I have used more than one USB cord, ports, and 2 different computers with the same problem.
Both the computers are running windows 7 64bit. One is a laptop (ASUS) and a desktop(HP).

Can someone please help me with this problem.

Thanks,
Chris&Dawn
 

A:External HDD not recognized by my computer

So I said the facts but I never mentioned exactly what the issue is. sorry.

When I open my computer when the external HDD is plugged in, it's not there. I can't save files in it, open anything, it's just not there.

Also the icon that pops up that lets you "remove hardware safley" in the bottom right is not there. Also the external hard drive does not show up on any programs like "Defraggler" or "Speccy"

Thanks,
Chris&Dawn
 

http://www.techspot.com/community/topics/external-hdd-not-recognized-by-my-computer.176212/
Relevancy 12.9%

With Broadwell and Skylake desktop CPUs expected to launch next quarter, the urge to upgrade my computer has never been stronger.

Read more
 

A:Weekend Open Forum: What CPU powers your computer?

Got an i5-2500k in my gaming computer, and a C2Q Q8200 in my home server. Because of the small enclosures they are in I have not overclocked them, with the watercooled 2500k being in a Prodigy case stuffed to the gills, and the Q8200 is in a 2U rack case.

Not sure about the server, but I know with Star Citizen in the distant horizon, I'm very compelled to upgrade around the end of the year. This is driven less by my CPU and more by my graphics card (watercooled GTX 570) and memory, which I only have 8GB.

edit: oh yeah, and my XPS 12 has an i5-4210.
 

http://www.techspot.com/community/topics/weekend-open-forum-what-cpu-powers-your-computer.208477/
Relevancy 12.9%

A factory AMD or Intel heatsink is something I simply won't consider when building a computer. I acquired my first aftermarket cooler 15 years ago to assist in overclocking an AMD Athlon 500 (it reached 800MHz with help from a...

Read more
 

A:Weekend Open Forum: What heatsink / water kit cools your computer?

Mine is water cooled. Except instead of liquid its solid. And instead of water its aluminum. And instead of a pump its got a fan. Its actually a laptop.
 

http://www.techspot.com/community/topics/weekend-open-forum-what-heatsink-water-kit-cools-your-computer.209240/
Relevancy 17.2%

Look no further than a solid state drive for breakneck speed. If a large-capacity drive for storage is what you're after, however, traditional spinning hard drives are still the best bet in terms of price per GB. And if you...

Read more
 

A:Western Digital 'Green' hard drives now available in capacities up to 6TB

On a more interesting note, Seagate is already shipping 8TB HDD-s to its select customers, with 10TB ones to follow.

Besides, nothing beats the current 6TB Enterprise offer from Seagate anyway, in terms of price+performance+capacity. Let Western Digital lag behind as it does
 

http://www.techspot.com/community/topics/western-digital-green-hard-drives-now-available-in-capacities-up-to-6tb.204017/
Relevancy 17.2%

Hey,

Yesterday, I was working with my PC while my 1TB Seagate external hard (http://www.amazon.com/Seagate-FreeAgent-Ultra-Portable-External-STAA1000101/dp/B0045JLPMO) was plugged in via USB. The USB connection was a little bit loose.

Then when I was plugging a USB flash memory in, I noticed that the external hard was disconnected.
I connected it again, but it didn't appear in My Computer.
Here is the state in Disk Management and Device Manager:




After that, I plugged out the "SATA to USB converter" from the hard and connected it directly to SATA cable inside the PC case (like internal HDD), but this time nothing showed up in Disk Management, Device Manager and BIOS. However, it took a long time for the system to boot.


I searched and read lots of threads and tested some other stuff:





(It didn't appear in Minitool Partion Wizad).

I've got a lot of data on this HDD which really matters to me.
Any help is really appreciated.
 

A:FreeAgent 1TB External Hard stopped working (unknown, not initialized)

Hi there Sedhadi,

If your HDD is failing the manufacturer's tests it is probably dead. IF you need to get your data back look for a reputable data recovery company in the area.
Hope that helps.
 

http://www.techspot.com/community/topics/freeagent-1tb-external-hard-stopped-working-unknown-not-initialized.208828/
Relevancy 17.2%

When booting up my computer, directly after auto-detecting SATA devices, my computer regularly gives me an error that alternately reads "Primary Hard Disk Failure, Press F1 to Resume..." or "Secondary Hard Disk Failure, Press F1 to Resume..." Sometimes the word "Slave" or "Master" are there after the words "Primary" or "Secondary" in there as well. While the content of the message varies, the result is usually the same: The startup process lags after auto-detecting the drives, then gives me this error.

I have three SATA hard drives and a DVD drive plugged in to my mb via SATA. When no HDD are detached, but I have boot media in the DVD drive, the computer starts up quickly and normally, with no errors. When any or all of the HDDs are plugged in, I receive the above error. I borrowed a HDD from my roommate, plugged it in, attempted to boot up and still received the error. None of the HDD are bad, and it would be a pretty big coincidence for all four I've tested to fail at once.

What could the problem be?
 

A:Primary Hard Disk Failure, Press F1 to Resume

UPDATE:

When I plug in just one or two of the HDD + the DVD drive, the computer boots fine. When I plug in three HDD + DVD drive, failure! Do I perhaps need to upgrade my power supply?
 

http://www.techspot.com/community/topics/primary-hard-disk-failure-press-f1-to-resume.208761/
Relevancy 12.9%

Hi all. I've got this issue with my graphic card (fresh and crispy by the way - 1 month old). Few days ago I was just browsing web when suddenly blue screen came out of nowhere on my Windows 8.1 desktop PC. Ever since then when computer boots screen is filled mozaic-like with green squares, after few seconds it's changing to vertical lines. Obviously Windows window manager won't open at all, and it greets me with black screen. After I deactivated graphic card, and switched cable to main boards VGA port computer runs ok.

I've seen some similar threads on techspot suggesting that due to escessive dust 'consuption' GPU can overheat and irreverisbly burn therefore. Is it possible that the same thing occured here?




 

A:Green squares on computer boot, Nvidia GTS 250

It's what I've seen on the screen when one of my graphics cards has died. As it's almost new changing it shouldn't be a problem. It's more likely to be a faulty graphics card than dust. Double check that it's seating properly in its port and that the video cable is OK.
 

http://www.techspot.com/community/topics/green-squares-on-computer-boot-nvidia-gts-250.208163/
Relevancy 17.2%

Hey guys weird problem here The TB internal drive in my PC started slowly dying in December and my brother got me an SSD additional and connecting when laggy hard drives PC sluggish for Christmas I installed it and it works amazing flawlessly and I love it When I attempted to make my old dying drive a secondary hard drive Windows PC laggy and sluggish when connecting additional hard drives recognized it fine despite the SATA connection broken off and I was able to salvage what I wanted from it The speed of the transfer was blazing and I was pretty happy but I noticed Windows getting insanely laggy and sluggish The mouse would stop moving every few inches and the keyboard would stop responding Instead of normal lag such as me typing this sentence nothing happening and then it appearing in full a few seconds later when the lag would catch up it would be a jumble of letters For example if I typed quot wow my computer is going slow right now quot it would come out quot wom mpui gin sright n quot That s a new type of lag for me as my PC has never had issues I assumed this was due to the death of the drive and Windows having problems recognizing it or reading it Sure enough when I disconnected it everything ran smoothly I have an iOmega TB external drive LDHD-UP - don t judge it was on sale that I m not too fond of but I use regularly for storage and backup I usually have it plugged into the back of my PC and this presents a whole other issue which I need another thread for but I ve dealt with it fine and it normally works all right However I found out it s USB compatible and my PC has outlets on the top so I wanted to keep it plugged into there But when I do that I experience that exact same type of lag as before when the internal hard drive was plugged in It s persistent and near-constant but it stops the second I turn off the hard drive I ve disabled antivirus I ve ran disckchecks I ve formatted none of it makes a difference Does anyone know what would be causing this with separate hard drives connected in completely different ways Any help would be greatly appreciated nbsp

A:PC laggy and sluggish when connecting additional hard drives

I don't know the answer but will comment about the issue of lag in typing. I have a wireless keyboard and mouse and I know when the batteries need replacing because the keyboard behaves exactly like yours and the mouse stops moving the cursor properly. Maybe your issue's connected with the power being drawn when you have the two drives connected. Don't rush out and upgrade your psu though. I only switch on my usb external hard drive for the occasions I need it.
 

http://www.techspot.com/community/topics/pc-laggy-and-sluggish-when-connecting-additional-hard-drives.207975/
Relevancy 17.63%

I am building a new system, only part used is the power supply. My motherboard can't detect my hard drive. I tried switching cables but it only detects my dvd drive. Any assistance will be greatly appreciated.
 

A:Can't detect hard drive

First make shure the data & power cables are plugged in securely, on both the MB and hard drive. and no there is not a power cable for the hard drive on the MB.
 

http://www.techspot.com/community/topics/cant-detect-hard-drive.207744/
Relevancy 17.2%

Is there any way of sharing hard drives/folder over the internet with the client side need to install anything.
I.e use add network location option in my computer
Or a client programme that is user friendly

The server side will need to run on my computer,
looked at FreeNas thats not an option,
Filezilla looks like it the best option server side of things but uses a client programe.

Im happy to run any programmes/OS's in a VM if that were needed.

Thanks in Advance
 

http://www.techspot.com/community/topics/sharing-hard-drive-over-internet-without-client-programes.207578/
Relevancy 13.33%

I recently bought several Dell Optiplex GX computers online for repair I usually do a thorough review of what I am getting but this was a a with VGA Help DVI-D on port computer monitor using a cheap deal on a big lot and a few things slipped by me For one it takes a special power cord that I can t find for less than and there were none Help using a VGA monitor with a DVI-D port on computer with the lot I ordered one to test them with for now but that is not my main problem but if anyone knows where I can get those DA- adapter power cords any cheaper please let me know where My main problem is that these are the small form factor cases so they have no card slots I am dependent upon the motherboard options only So here is my problem the only connector for a monitor on the back of the computer is for a DVI-D which would be great if I had monitors with those connections The only connections I have on my monitors are the VGA I bought some adapters from e-bay that were supposed to convert the DVI port to the VGA which the connector did but I have no screen using this adapter and I am thinking that I was cheated Can this even be done this way I have always just changed the video card but this computer has no way I can see to do that it is all in the motherboard Does anyone know what I can do here I put a fresh install of io xp pro on several of then since that is what they came with They only have pentium s with hyperthreading and single core processors and I didn t think windows would help any If anyone knows what I can do to use these VGA monitors please tell me because without being able to put a video card in it I am lost sincerely cableman nbsp

A:Help using a VGA monitor with a DVI-D port on computer

Your best bet for Global spares is www.pchub.com.

As to the DVI to D-Sub you did the right thing in buying an adapter. It should work period. Did you get the joblot from eBay? Was it sold as untested? Are the PCs even powering on? Maybe there are issues with memory/cpu/motherboard....

http://support.dell.com/support/edocs/systems/opgx620/en/ug/A02/solve00.htm#wp1286323

Yes you have to be very careful when upgrading the CPUs for this unit as they follow a narrower roadmap. Top line CPU would appear to be a Pentium D3.4Ghz which worked in a GX620 usff with bios revision A11.

Good luck!
 

http://www.techspot.com/community/topics/help-using-a-vga-monitor-with-a-dvi-d-port-on-computer.172534/
Relevancy 13.33%

My computer is being running slow and is choppy also, I'm making sure the system is clean right now.
 

A:Computer slow and choppy

Problem solved, runned some anti-malaware programs and cleaned my computer.
 

http://www.techspot.com/community/topics/computer-slow-and-choppy.207403/
Relevancy 12.9%

I have a Windows 7 HP desktop system that is connected to the internet via an ethernet cable. The system says it is connected, and a ping confirms it is accessing the internet. BUT, all the browsers say the computer is not connected to the internet (tried Chrome, Firefox and IE). All of the Microsoft network adapters (6to4, ISATAP adapter, ISATAP adapter #2, Teredo Tunneling Adapter) shown under device manager cannot start (Code 10). the Realtek PCIe FE Family Controller is the only network adapter shown as working properly. What do I need to do to fix this? Let me know if there is any other information needed to help me.
 

A:Windows 7 computer says connect via ethernet and ping confirms but cannot get to any page

Does your router see this computer on the network?
Are you on Private Network or Home Network?
Is the IP address showing 192.168.x.x or is it showing 169.xx.xx.xx?

NIC network card you can do a few things. You can can disable it and re-able it.
Open dos prompt
type: ipconfig /flushdns
type: ipconfig /release
type: ipconfig /renew

Give this a sec or two.

Now under services.msc (use the control panel and type services)
Select view local services
Scroll down for
DHCP Client (right click and stop it) wait then right click and start it
DNS Client (right click and stop it) wait then right click and start it

If none of the above work go into the device manager. under control panel type: device manager. click on device manager

-Network adapters
-Realtek PCI-e this one uninstall the drivers (BUT DO NOT DELETE THEM)

Two options here.
One: Scan computer for new hardware changes
Two: Reboot the PC

Choose Two, because Windows will re-install the drivers and setup network card settings. for you. The Choosing One would do that same but you really want to flush out any prior issues that got you to this point.
 

http://www.techspot.com/community/topics/windows-7-computer-says-connect-via-ethernet-and-ping-confirms-but-cannot-get-to-any-page.207373/
Relevancy 13.33%

Hey , I am not good at computers
plz help me to choose the best and cheap graphic card for my computer
the details of my computer are:
OS Name Microsoft Windows 7 Professional
Version 6.1.7601 Service Pack 1 Build 7601
Other OS Description Not Available
OS Manufacturer Microsoft Corporation
System Name PAWAN-PC
System Manufacturer WIPRO
System Model MS-7267
System Type X86-based PC
Processor Intel(R) Celeron(R) CPU 2.80GHz, 2792 Mhz, 1 Core(s), 1 Logical Processor(s)
BIOS Version/Date American Megatrends Inc. V17.21B6, 9/10/2007
SMBIOS Version 2.5
Windows Directory C:\Windows
System Directory C:\Windows\system32
Boot Device \Device\HarddiskVolume1
Locale United States
Hardware Abstraction Layer Version = "6.1.7601.17514"
User Name pawan-PC\pawan
Time Zone India Standard Time
Installed Physical Memory (RAM) 1.00 GB
Total Physical Memory 0.99 GB
Available Physical Memory 211 MB
Total Virtual Memory 1.99 GB
Available Virtual Memory 921 MB
Page File Space 1.00 GB
Page File C:\pagefile.sys
 

A:What's the best and cheap video card for my computer?

I don't think that GPU will make any difference in your 'rig'
 

http://www.techspot.com/community/topics/whats-the-best-and-cheap-video-card-for-my-computer.207332/
Relevancy 16.77%

I had a new PC so I thought I would do a recovery disk on a separate partition of my parent's disk. Turns out windows wipes out everything regardless of partition when it does that. So now lifelong memories are gone and I'm freaking out! I used EaseUS to make different partitions which were deleted. After I found that the partition I chose stayed the same size but was renamed RECOVERY and it had the recovery data in it. However the rest was "unused" and so I dragged the RECOVERY to make full use of the disk and then I started scanning it deeply with hard drive recovery software. I am now through scanning with my 2nd program now (1st one didn't give me the files I needed) and I'm using RecoverMyFiles. The problem is I'm not really getting back any of the files I had deleted by windows, but I get some stupid windows files which were probably deleted in the recovery process!! PLEASE help me!!! I am desperate. Future hanging in balance thank you.
 

A:Recovering Lifelong Memories from Windows Recovery-Wiped External Hard Drive

There are quite a few programs you could try, I have had most success with Recuva by Piriform, but recently this program was said to be excellent by a user,
http://www.ylcomputing.com/content/view/350/153/
Obviously it's worthwhile trying both of them.
 

http://www.techspot.com/community/topics/recovering-lifelong-memories-from-windows-recovery-wiped-external-hard-drive.207350/
Relevancy 12.9%

When I am playing a video with any browser it is very choppy (sound and video).
Even Window sounds are choppy. It seems like if I move the mouse it gets worse.

Computer is very slow to open programs, even though the system idle process
is at 99% before starting another progam. This happens even when no browser is open and the
anti-virus software is disabled.

I don't know is this is a software or hardware issue.
 

A:Computer very slow. Choppy video and audio playback from browsers

Post this here:
http://www.techspot.com/community/forums/virus-and-malware-removal.28/
See if they can help with this problem
 

http://www.techspot.com/community/topics/computer-very-slow-choppy-video-and-audio-playback-from-browsers.207159/
Relevancy 12.9%

Hello all,

I use an ADSL modem for accessing Internet in my home. I think my wifi password is stolen. I wanna change it but I have a computer only in my office and use the Internet in my home by my iPhone. Is there a way to change that password with my iPhone or should I surely use a computer to do that work, please?
 

A:How to change the Wifi password of an ADSL modem without a computer

Hello abbasi ,
You can use your iPhone to log in the router and change the wireless settings, however this isn't usually recommended. If something goes wrong when configuring the wireless settings and you are not able to connect to the router you'll need a device that can be connected via Ethernet cable to restore the access.
If this router is supplied by your ISP you can ask them if they have remote access to it to change the password.
Hope that helps.
 

http://www.techspot.com/community/topics/how-to-change-the-wifi-password-of-an-adsl-modem-without-a-computer.207093/
Relevancy 13.33%

I need a computer that can handle video editing, mainly Final Cut Pro and Adobe Suite. Right now I have a 5-year-old MacBook Pro that can't manage FCP let alone run any programs smoothly and quickly. I can't afford a MacPro, so I've been considering iMacs. What's my cheapest option that will get the job done? I've heard you can buy PCs and install Mac OS. Would that be my best option? (Having PC capabilities would be awesome, for light gaming). I want to save money but I don't want to buy anything that isn't equipped to handle video editing well (cause then I'm just wasting money). I want to stick with Mac OS, but I don't care about the design or whatever, so I'd happily get a PC and put Mac on it, but I don't know how I would go about doing that. So if you have any suggestions or advice, please let me know! Thanks!!
 

A:Buying new computer/OS for video editing

What is your budget (how much can you spend) for this new computer?
 

http://www.techspot.com/community/topics/buying-new-computer-os-for-video-editing.207058/
Relevancy 13.33%

I have been thinking about buying a really good Gaming Computer, and now I have no idea which computer or specs to actually get. I want something cheap but don't mind expensive. I also heard that custom built computers are better than already engineered computers. I was checking out http://www.ibuypower.com/Store/Intel-B85-Configurator but like I said I don't know what specs to get for this computer. I want a computer that can support any game like any call of duty, minecraft, LoL, WoW, etc. and maybe posting videos on YouTube or others. Please help and thank you for your attention.

Please comment the specs
 

A:A good gaming computer

That is a good place to have a computer built as far as specs go there is no computer specs that have to be met, a good PSU is good in any machine, a reasonable mobo is needed in any machine. I prefer ASUS but they will be the highest if top of the line. if u are going to overclock make sure it is over clockable and make sure the processor is over
clockcable and yes they both have the ability, although the board will just put the # down. any video card will play games, but the newer ones should give u more frames, and last longer. as far as the processor AMD or Intel will be fine. and that site will e-mail u if the MOBO and processor will not work together.
 

http://www.techspot.com/community/topics/a-good-gaming-computer.206756/
Relevancy 12.47%

Printer Problems in Windows XP sp3
Dell Personal Printer all in one A940
After trying to speed up an older computer running Windows XP
I may have cut off the Print Spooler (or it was already off ?)
I went back to Services dialog box & selected Print Spooler
I clicked the "Start" link at left of service list & got a message tgat said
"could not start print spooler service on local computer error 1068 The dependency service or group failed to start."
Printer is still not working can anyone help?
 

A:Could not start print spooler service on local computer error 1068

On Win/7 the dependencies are

HTTP

Remote Procedure Call (RPC)
DCOM Server Process Launcher
RPC Endpoint Mapper
Manually start each on and set to AUTOSTART as you go.
If one fails, then that is the root problem.
 

http://www.techspot.com/community/topics/could-not-start-print-spooler-service-on-local-computer-error-1068.206839/
Relevancy 17.63%

I cloned my failing hard drive (a 160gb) to a new one (500gb). The installation seemed to go smoothly enough (it was my first time though) as it just required me to stay grounded and remove about 4-5 screws. When I loaded the PC up it wouldnt start the first time so I had to a Windows repair, which didn't seem to do anything except now it worked (it said it failed or something). I then had an issue with Windows 7 claiming to not be genuine although for one reason or another that stopped. Now my issue is that I am unable to access the additional memory of my new hard drive, I am able to access the cloned portion but not the rest (about 316gb). Any help would be appreciated, my PC is a Dell Latitude E6400 if that helps.
 

A:Inaccessible Memory on Cloned Hard Drive

Hello there,

It is absolutely normal not to see the rest of the free space in the moment. When you clone a drive you create the exact same image of old drive on the new one. This includes the size of the original HDD. However if you go to Disk Management ( type diskmgmt.msc in the search in the start menu and hit enter) you will see that you have one partition of 160GB and the rest of the space will be listed as unallocated. To use it you have two options ? you can create a second partition or you can extend the original one to take all the available space.

To create a new second partition just right-click on the unallocated space and select ?New Simple Volume?. This will starts a wizard to guide you through the rest of the process. First it will ask about the size of the partition. To use all the remaining space just type in the same value you have for Maximum disk space. Click Next.

Then you will get to choose and available drive letter to assign to this partition. Choose one and click Next.

Then you get to the Format partition window. You should choose ?Format volume with the following settings: ?. For the file system is best to leave NTFS. Allocation unit size as default. You can also put a label for the volume here. Then tick the box for ?Perform a Quick Format. ? Click Next. Then Click Finish. And you're done.

If at any point Windows pops up with the following message ?The operation selected will convert the disk to dynamic... are you sure you want to continue? ? click NO as this will most probably make your Windows unbootable and you will have to reinstall it.

If you want to extend the existing partition right-click on 160GB partition and select ?Extend Volume?. It will start the wizard and will only ask about how much space to add. Just select the maximum available space here and click Next, then click Finish. Once done your existing partition will be bigger and you'll be able to use all the space on your new HDD.

Hope that helps.
 

http://www.techspot.com/community/topics/inaccessible-memory-on-cloned-hard-drive.206835/
Relevancy 29.67%

My 320 GB Seagate external hard drive is detected but not showing up in my computer. What should I do?

In cmd> diskpart> list volume it does not show up. (screenshot attached)

In Device Manager it gets detected. (screenshot attached)

In disk management it shows up as 'unallocated'. If I initialize it, will I lose all data on the drive? It had 4 partitions. (screenshot attached)

In My Computer also it does not show up. (screenshot attached)
Even BIOS recognizes it.

What to do? I don't want to lose any data on the drive. If I initialize it in device manager will I lose data?

I was installing window XP on my computer, usually I remove the external drive but this time I did not. The external drive was shown as 4 drives in partition manager during installation. But the installation failed. The next time I was installing windows again, the external drive was shown as 1 single unknown or unrecognized drive. I'm not sure if it was unknown or unrecognized. I'm sure I didn't format it. So what I need to do now? I don't want to lose any data.
 

A:Seagate external hard drive not showing up in my computer. It is detected.

Yes, if you initialize it you will 'lose' everything. You will want to try something like [email protected] Recovery or maybe Easeus Partition Recovery.
 

http://www.techspot.com/community/topics/seagate-external-hard-drive-not-showing-up-in-my-computer-it-is-detected.205926/
Relevancy 12.9%

Hi,

I'm using a Huawei Mobile Broadband E303 and I've been having this problem for 6-7 days now Ples halp
It was working perfectly fine before but now the speed wont go past 60-70kbps.
My current operating system is windows 7 ( V 6.1.7601 )

I've tried using it on other laptops with windows 7/xp/vista as their operating systems still the same problem except for my brothers laptop which runs on windows 8. and dont tell me that this Thing wont work because its not compatible with my operating system, because I've been using it for over a year without an issue.

My ipconfig shows:
Mobile Broadband adapter Mobile Broadband Connection:

Connection-specific DNS Suffix . :
Link-local IPv6 Address . . . . . : fe80::7450:69bc:7a3e:fee8%57
IPv4 Address. . . . . . . . . . . : 172.22.155.137
Subnet Mask . . . . . . . . . . . : 255.255.255.252
Default Gateway . . . . . . . . . : 172.22.155.138
And when I try to do nslookup:
C:\Windows\system32>nslookup
Default Server: google-public-dns-a.google.com
Address: 8.8.8.8

The default server shouldn't be that thing. please help. Nor the address

Edit: I've tried Uninstalling the Program which came with the USB.
I've tried calling my ISP, with no problems on their end.
 

http://www.techspot.com/community/topics/your-computer-seems-to-be-correctly-configured-but-the-device-or-resource-dns-server-not-respondin.206332/
Relevancy 13.33%

Randomly, about 2-3 weeks ago my computer began to run slowly. If I'm just browsing the internet or using word documents and things like that it is fine and I cannot tell. The problem lies in things like playing games or running programs like itunes. I checked for all virus/malware, and there was nothing that I could see. I did a defrag and cleaned/cleared the registry and temp folder. Does this sound like it could be a hardware or driver problem? If its not a virus, could you give me a few other reason a computer would start doing this randomly.
 

A:Computer runs slow

Overheating? What are the computers specs?
 

http://www.techspot.com/community/topics/computer-runs-slow.179236/
Relevancy 17.63%

My Buffalo HD which is actually a WD 500GB Hard drive. I opend it up and connected via SATA adapter but still the problem persists. I checked the drivers. Looked for clicking noise as in dead hard drive but none of those problems seems to be there. Also I tried formatting it but was unable to do so. Can anyone tell me whats the cause? It still may be the head problem but its not clicking as a dead hard drive does. It also seems to be spinning just fine but can't get to the root of the problem. Does anyone knows whats the problem?
 

A:Hard Drive Not Responding

Could be some issue on the PCB. Suppose if you were really dedicated to getting your data back you could buy the same drive off eBay or wherever and swap the boards. That may be more difficult to do since Buffalo may not have stuck to WD the whole time OR WD supplied a special series of drives to Buffalo. Check the model numbers to be sure before going that route.
 

http://www.techspot.com/community/topics/hard-drive-not-responding.206015/
Relevancy 17.63%

My old hard drive was a sata drive but it failed so I had an old ide 80gb barracuda 7200rpm drive that I wanted to install windows on but when I load the windows installation and goto custom it wont show my drive. My bios detects it its just windows . I tried using diskpart and even formating the drive to ntfs witha complete whip but still no luck .
 

A:Windows installation can't detect my ide hard drive?

Perhaps the hard drive's jumper setting is incorrect. Are there any other IDE devices connected on the same cable as the HDD?
 

http://www.techspot.com/community/topics/windows-installation-cant-detect-my-ide-hard-drive.192208/
Relevancy 17.63%

I have 2 new external hard discs do show on my computer .They are running but not showing in PC.What to do ? Thank you
 

A:External hard drives not showing up

Hello,

I'm not completely certain that I understood your situation. I wonder if it's possible to clarify the question? Otherwise Disk Management is a good place to start looking for a missing HDD.
If the HDD is brand new you might need to initialize it. This is needed if below the disk it says ?Not Initialized?. Right-click on the Disk that says ?Not Initialized? and click ?Initialize Disk?. Then you will have the option to choose between MBR and GPT. If the drive is more than 2 TB you should use GPT, if not you could use MBR as well. Once the Disk is listed as Basic and online right click the unallocated space and click create a ?New Simple Volume?. For the file system choose ?NTFS? if you want to use the HDD on Windows.

Hope that helps.
 

http://www.techspot.com/community/topics/external-hard-drives-not-showing-up.205942/
Relevancy 13.33%

These are the specs I have so far,

MSI X99S Gaming 7 Motherboard
i7 5820K
Corsair Vengeance LPX 16GB (4x4)
2x MSI GeForce GTX 970 Gaming 4GB SLI
Cosair Hydro Series H80i
Cosair HX1000i 80plus Platinum 1000W (For future maybe a third gtx970)
Coolermaster Cosmos 2 Ultra
Samsung EVO 250GB (OS)
2x Samsung EVO 1TB (Main Games)
2x Western Digital Black 3TB (Other older games and programs)
Windows 7 Pro 64x

Other various fans (going with a black and blue theme outside and red and white inside)

Plenty for max setting at that resolution?
 

http://www.techspot.com/community/topics/parts-for-3440x1440-computer.205962/
Relevancy 13.33%

A few months ago my computer started crashing when playing games. The screen would turn either black, white, (or once pink), the fan/fans would max out, and the audio would just change to a loud buzzing sound. This would continue until the laptop was turned off.
Around that time, one of my hard drives was failing. We thought, seeing as it fitted so well, that it was the problem. I've just had the hard drives replaced, and while it was running perfectly for a few days, it has now started to crash again, and far more frequently. Most of the time just after the desktop loads.

I'm currently running in safe mode, and that's perfectly fine. No crashing.
I've tried disabling my audio drivers, and rolling back my video card driver, but with no success. I'm assuming that as safe mode has no problems that it must relate to a driver, or, some software, but I have no real clue what I'm talking about.

My video card is the NVIDIA GeForce GTX 580M, if that's important. No idea what other information to include. Thanks for any help anyone can give me.
 

A:Computer crashes increasingly often

Go to C:\windows\minidump. Minidump files have a .dmp extension. If there are any .dmp files, select them all and right-click, sending the files to a compressed(zipped)folder. Upload this folder as file here
 

http://www.techspot.com/community/topics/computer-crashes-increasingly-often.205623/
Relevancy 13.33%

Hello guys..I have a same a problem..I cant play any of my mouse in my laptop..can u help me to fix it..thank you so much.

Moderator note: Moved from this thread: http://www.techspot.com/community/t...t-computer-is-not-frozen.183253/#post-1430301
 

A:Can't move my mouse, but computer is not frozen

You can't use any USB mice in your laptop? How many have you tried?
 

http://www.techspot.com/community/topics/cant-move-my-mouse-but-computer-is-not-frozen.205615/
Relevancy 13.33%

Hello all,

I'm reading this (http://wps.pearsoned.com/ecs_kurose_compnetw_6/) networking book.
The exercise no 13 of chapter one says:

P13. (a) Suppose N packets arrive simultaneously to a link at which no packets are currently being transmitted or queued. Each packet is of length L and the link has transmission rate R. What is the average queuing delay for the N packets?

(b) Now suppose that N such packets arrive to the link every LN/R seconds. What is the average queuing delay of a packet?

I've obtained these for (a) and (b):

(a): (N-1)/2 L/R sec.
(b): For nth LN/R: [n(N-1)-2(n-1)]/2 L/R sec.

1- Are these answers correct?
2- Is here a correct place for posting such problems?
 

A:Computer networking exercises

My my; Network theory. Not to dampen your efforts, but unless there's a switch, knob, or parameter that can alter the outcome, there's little practical use of this kind of information IMO.

As an example of a practical issue, the SACKOPTS paramater greatly improves TCP performance.
 

http://www.techspot.com/community/topics/computer-networking-exercises.205528/
Relevancy 12.9%

Hello,

I'm really new to the tech/ computer world, and know next to nothing about graphics cards. I was wondering if someone could help me figure out what graphics card I can upgrade my computer to (if I can upgrade at all) I was wanting to buy the new Sims 4 game, but after having played a very slow and choppy Sims 3 for years on this computer, I'm ready to actually play a game smoothly without it freezing all the time.

Here's what computer I have:
Compaq Presario PC SR5601P
Processor: AMD Athlon X2 4400
Dual-Core Processor
Memory: 1 GB
Hard drive: 250 GB
Graphics: NVIDIA GeForce 6150 SE Graphics
Windows Vista SP 1

Thanks!
 

A:Unsure of what graphics card my computer can upgrade to

Sims 4 System Requirements & your PC system results

For Sims 4 according to the link above, your CPU GPU and memory is lacking for even the minimum system specs. We can recommend a GPU, but that's not all you need if you plan on playing Sims 4. And if you get a stronger GPU, chances are you will also need a stronger PSU. If 300W's is all you have for power, you are limited to sub $100 graphic cards. Which would be fine for Sims 4, but then you also have a CPU and memory that needs upgrading.
 

http://www.techspot.com/community/topics/unsure-of-what-graphics-card-my-computer-can-upgrade-to.205298/
Relevancy 17.63%

So, when I built my PC I installed the OS on a HDD drive with the thoughts that I could later transfer it to SSD,

(did it before using hard drive cloning software to copy the OS drive to a new drive and then once working formatting the old drive.)

however when I started doing some reserch on cloneing software I noticed that windows 7 might not be cloneable (my past experiances are with XP) since there are mixed reviews on each bit of software out there both on Amazon and on the web. sevral report that windows 7 sees the clone as an unlicenced copy and refuses to boot. others say the clone drive misses it's boot file.

can some people advise me on if any of these facts are true or not?
 

A:Hard drive migration to SSD questions

Hi.
Cloning should work fine if you do it properly with windows 7. It's possible that windows can throw up a licensing issue, but very unlikely. In the event that it does, call Microsoft and they should be able to get it sorted out for you.

As for the bootability of the drive, cloning the drive's data does not necessarily make it bootable, but if you look online you'll see some cloning tutorials that include a section for rewriting the MBR on your SSD to make it the primary bootable drive in case it ends up not booting properly. This isn't hard to do and usually isn't a necessary step.

Also just keep in mind that simply cloning the SSD will probably result in an unaligned drive, so make sure that you get it properly aligned. Some cloning software has an aligning option built into the cloning process that you'll want to select.

So go for it and come back if you're having any issues.
 

http://www.techspot.com/community/topics/hard-drive-migration-to-ssd-questions.204382/
Relevancy 17.63%

Sorry I must not have sent the last post correctly I am new to this site So I will try again I was getting ready to upgrade to bigger hard drive or drives Before doing that I needed to take the old hard drives out to obtain some information off the labels I did so and while they where out I cleaned the Mounting slots a little better than using just No drives to SATA Power hard air Having done that I re-installed them both When I turned on the power button the button lit up and the fans were running But No Power to SATA hard drives it No Power to SATA hard drives does not seem that the hard drives are getting any power as I can t hear or feel any thing Plus the computer is not booting No Power to SATA hard drives I don t recall unplugging anything other than the two hard drives But I also notice that I have a short cable bundle with two white plugs with three pins and one empty pin hole on the other end a black connection with with five connector slots with one middle on blank That makes me think that I unplugged the power to the hard drive someplace along the ling As I have a wire bundle that has two SATA power connectors that are plugged in But their are three white female plugs marked P P and P which are not connected to anything in that wire bundle I don t know at this point if the power comes through that bundle from the power source Of if I do not have the power plugged into the lope I hope that somebody can help me figure this out and let me know if I burnt out the hard drives and have to start over with my recover disk reloading windows and going from there nbsp

A:No Power to SATA hard drives

How would I close this post out. Dumb me had the monitor plugged into an unused VGA port. It only took me two and a half days to figure that out. I wanted to let others know to check and see if they have everything plugged in where it should be. Including the VGA or other monitor cables.
 

http://www.techspot.com/community/topics/no-power-to-sata-hard-drives.204843/
Relevancy 13.33%

I have been upgrading an old Compaq Presario SR5130NX.
I'm new to the computer scene, and decided to switch the PSU to 230V, just to see what would happen. It exploded. That's what happened. I installed a new PSU, and now, whenever I turn on the PC, there is an error message saying "CPU fan has failed" and the PC shuts down automatically before I can access the set up, or bios. My case is currently open however, and I can see that the fan is working so I think the motherboard got messed up, and I'm afraid this could have also damaged my graphics card and memory.

My motherboard is a m2n68-la (ivy) and here are the product specifications: http://h10025.www1.hp.com/ewfrf/wc/...&product=3436820&tmp_track_link=ot_search#N96

Can anyone tell me what's going on? Can this be fixed, or should I just get a new motherboard and start from scratch?

If I'm posting this in the wrong section, please point me in the right direction.
 

A:Is my computer dead?

Unplug from wall socket.
reset bios by removing bios battery for few seconds. reinsert bios battery.
check if cpu fan is still attached to cpu fan header and is still intact.
check 20+4 main power connector
check 4-pin auxiliary power connector (can be 4+4, depending on motherboard)
(check the motherboard for any burnt marks, bloated capacitors.)
plug to wall socket and turn on.

if unable to power up computer, then maybe the motherboard is dead.
if the motherboard has any burnt marks or bloated capacitors, don't use it as it maybe dead.

if you are going to build a new budget build:
processor: intel Pentium g3258
cpu cooler: coolermaster hyper 212 evo (or 212x)
motherboard: h81, b85, h97, or z97
memory: 4gb ddr3-1600 single memory module (or 2x4gb)
gpu: NVidia gtx 750, amd r9 260
storage: 1tb hdd
psu: seasonic 500w+
OS: windows 8.1 64-bit or ubuntu
case

alternate build:
processor: i5-4690k
cpu cooler: coolermaster hyper212 evo (or 212x)
motherboard: asus/asrock z97
memory: 2x4gb ddr3-1600 (or 2x8gb)
gpu: NVidia gtx 760 or amd r9 270x (or higher)
storage: 256gb Samsung 840 evo ssd + 3tb Seagate hdd or 2tb wd black hdd
psu: seasonic 600W+ for single gpu usage
OS: windows 8.1 64-bit or ubuntu
case
 

http://www.techspot.com/community/topics/is-my-computer-dead.204809/
Relevancy 12.9%

Here again since I have the most weird problem ever which I have never seen nor heard of before. I recently upgraded the OS on a friends computer, from Vista to 7. However now I can't seem to get the onboard ethernet adapter to work, it can't be seen in device manager nor anywhere else. I have tried to reset the bios (by removing the cmos battery) and I have also checked that the network adapter is set to 'Enabled'. Also, when I connect the cable to the ethernet port no lights go on, it doesn't give any sort of hope what so ever. The cable is ok, the "modem" is ok, and everything else seems to be in order and yet it doesn't work.

Computer in question:
HP Pavilion 6530sc
Non-default GPU and added 1Gb RAM
 

A:Solved: Computer doesn't recognize the network adapter

Whenever you install a new OS, always take note of the model of core system hardware like GPU, chipset, and ethernet/wifi (there are a few others that aren't as important, but nice to have updated) since those are critical to your computers core functionality.

However, a quick google search of your model yielded me with your PC's system specs. Your PC contains a Realtek RTL8201N ethernet adapter. So far I am unable to find a driver from Realtek itself and the HP driver is not Realtek, but instead nVidia nForce.

So after a bit of searching, I came across this: it seems to me that you have an old chipset from nVidia. I am not completely sure, but I think you have an ION chipset. Try installing this ION chipset driver (64 bit) ==OR== this ION chipset driver (32 bit) and tell me if it works. It should include the necessary component drivers and if it works, it means you have an ION chipset like I suspected.

Here are the specifications for your PC BTW.
 

http://www.techspot.com/community/topics/solved-computer-doesnt-recognize-the-network-adapter.204750/
Relevancy 17.63%

Hi, I have a Verbatim Store n' go ex hard drive which used to work perfectly with usb 3.0 and 2.0. A few weeks ago it stopped working with 2.0 and now not even with 3.0. When I plug it in the hard disk starts to rotate and lights up normally, but is never shown on the drive list. The computer doesn't even do the beep sound when a usb device is connected. I tried on 2 different pc's but they show no result.

Any kind of help is greatly appreciated
 

http://www.techspot.com/community/topics/external-hard-drive-failure.204788/
Relevancy 13.33%

I've recently built a new computer for myself and has been running perfect for a few months. A couple days ago whilst gaming/browsing my monitor went into power safe mode and shortly after my computer shut off, I tried to start up again only to have the same problem occur , the only old parts were a graphics card and psu, I just got in a new gpu and installed it successfully. Same problem occurs. All fans are running properly including the heatsink , processor core temps are around 39 , everything seems to be running ok? Thoughts?
 

A:Very strange custom computer issue

Check event viewer to see why it shut down.
 

http://www.techspot.com/community/topics/very-strange-custom-computer-issue.204679/
Relevancy 17.2%

Hi Frnds

I hav a Toshiba 1 TB external HDD. It was working fyn till today. Now it is not showing in My Computer or Disk Management. It does make the sound when I connect or disconnect it from the laptop. and the HDD light remains on.

Please advise how to fix this

Thanks
 

A:Toshiba external USB hard drive not detected in any laptop

Go under the Device Manager and uninstall all the USB Controllers then reboot your PC don't connect the 1 TB just yet. Make sure nothing is connect to those ports like a keyboard or mouse otherwise they'll lockup. Once rebooted Windows will rebuild the table for USB Controllers. Now you should be all set. Unless you have some sort of conflict with IRQ or Registry setting. There is a free app called USBDVIEW what you would do is disconnect from all non-disconnected USB devices that are stored on the PC these settings can cause all sort of issues.
 

http://www.techspot.com/community/topics/toshiba-external-usb-hard-drive-not-detected-in-any-laptop.173740/
Relevancy 17.63%

My bother had deleted my laptop partition files and folders when attempting to extend my C partition. All my stored partition movies were lost and could not be found in Recycle Bin. Do you know where these partition videos are? I really want to view these videos again. What can I do to rescue them? Thank you for any advice!
 

A:Delete hard drive partition data

Hey, Luminaton03!

Sorry to hear you are experiencing such an issue.
Your data is stilll there somewhere as long as you don't overwrite it. If you save new data, it would rewrite your previous files.
I did some research for you and I found a threat that you might find helpful:
http://answers.microsoft.com/en-us/...back-the/a003d747-b760-42a7-819b-0235e8ec6d2c

I really hope this works for you!
Good luck!

SuperSoph_WD
 

http://www.techspot.com/community/topics/delete-hard-drive-partition-data.204583/
Relevancy 13.76%

I recently got a broken computer as payment for a data recovery project however as it turns out the computer Which computer to use? isn t entirely broken it actually works fine all I had to do was reset the bios and remove the GPU There s only one part that was broken and that was the GPU reason for that was overheating since the Clud D sticker on top of the GPU wasn t in place to it has been blocking the fan from spinning as it should Anyhow now I have ended up with a dilemma what computer should I use The Which computer to use? specs below is what I can put together with parts that I got and with the parts that I currently use and note that the only quot real quot difference is the CPU CPU Intel Core i - MOBO Asus P T SE HDD Gb Kingston SSD Gb Tb GPU XFX HD PSU W ChieftecClick to expand CPU AMD FX- OC - GHz depending on the temp inside MOBO Asus M A LE R HDD Gb Kingston SSD Gb Tb GPU XFX HD Which computer to use? PSU W ChieftecClick to expand Additional Question - Is it possible to use both Corsair tri-channle TR XG C RAM at the same time as my current Kingston RAM which isn t Which computer to use? tri-channel - How much can the i be overcloed nbsp

A:Which computer to use?

Having to choose between the two you have, I would stick with the Intel i7. Follow the guide provided in link and you could reach 4 GHz overclock, depending on if your motherboard can handle the overclocking.
http://www.overclock.net/t/538439/guide-to-overclocking-the-core-i7-920-or-930-to-4-0ghz
I would not suggest overclocking too much if you are running stock cooling fan. It will create too much heat for the i7 to handle.
 

http://www.techspot.com/community/topics/which-computer-to-use.204502/
Relevancy 17.2%

I recently bought a external hard disk of WD (My Passport Ultra) 1TB. It was working fine untill now. Now there is a problem going on. I have used only 656GB of space but it now show that I have only 4GB of storage left. Earlier it was showing 257 GB of space left from 913GB but now it shows the above. I can't understand what is the problem. If anybody could guide me it would an immense help. Thank you.

Bodhiswattwa Tewari
[email address removed]
 

A:Problem With My Passport Ultra external hard disk by WD

Maybe @jobeard could help here. What OS are you running? OS X or Windows?
 

http://www.techspot.com/community/topics/problem-with-my-passport-ultra-external-hard-disk-by-wd.204228/
Relevancy 13.33%

Hi all,

I have heard of somethings like computer manufacturer and motherborad manufacurer. For example some time ago, when I had problem with my desktop PC, some asked me what's your computer manufacturer and motherborad manufacurer?
what's the difference between these two please?
 

A:Computer/motherboard manufacturer

Computer manufacturer Is most of the time is Dell, Hp,Compaq, Ausu are a few.
Motherboard manufacturer . Asus, Gigbyte, Asrock. Msi, Are a few. This is what they are referring to. When they ask you those Questions .
 

http://www.techspot.com/community/topics/computer-motherboard-manufacturer.204218/
Relevancy 18.06%

Hi I have bought a laptop for my daughter its harddrive is 750gb but when I found it it is two hard drives.one initialled OS and the other data how is this supposed to work.regards Martin
 

A:Two hard drives

I know some manufactures have different ways they produce their setups, but most of the time its a partition and not another hard drive. What it does is store the System Backup / Restore on one partition so that you can reset the laptop to factory settings and the main "hard drive" (usually C prompt) is the partition you use on a daily basis. Unless you physically looked inside the laptop and saw 2 different hard drives, it should be just one hard drive that is split partitions. What is the make and model of this laptop? We can determine what setup you have with that information.
 

http://www.techspot.com/community/topics/two-hard-drives.204210/
Relevancy 12.9%

I have joined a computer (PC1) to a domain control server (2008), and user able to login using their domain user account - although recently I have found out that even though the computer (PC1) do not connect to a server, user still able to access using their domain account.
Is there a way for me to restrict domain account user from accessing the computer (PC1) if they are disconnected from server?
Hope my explanation make sense to you guyz.

Thank in advance
 

A:Prevening domain user from accessing Computer

Lots to be considered. Joining a domain is intended to give the company admin configuration control of all the company users.
This is normal, expected and even proper for the company to do this.




restrict domain account userClick to expand...

hmm; only the company admin should be able to do this and almost always it is done using some scripts, NOT by loggin into your PC. So - - who is accessing your PC remotely, the admin - - how do you know this occurs?

PCs joined to a domain usually get a replacement for PC Login - - the network form and that creates a link to the domain controller.
 

http://www.techspot.com/community/topics/prevening-domain-user-from-accessing-computer.204127/
Relevancy 17.63%

I'm trying to partition my hard drive, when I click shrink, it takes me to the shrinking window and it says:

Total size before shrink: 704749 MB
Size available to shrink: 7185 MB
Enter the amount of space to shrink: 7185 MB
Total size after shrink: 697564 MB

I don't understand how I have so much space, but I can only shrink it 7185. It is an NTFS.
Here's some screenshots
 

A:Why can't I partition my hard drive more?

Some files that are read only are preventing you from shrinking beyond a certain point while those files are open.

My suggestion would be to use partitioning software that is bootable. Boot to the disk and shrink your partition without windows running.

There are several freeware apps available to select from. The one I use is Partition Wizard Boot CD.
 

http://www.techspot.com/community/topics/why-cant-i-partition-my-hard-drive-more.204093/
Relevancy 13.33%

Hi everyone

Could someone look over what I have and see if there is anything wrong with the list. oo and I have a SSD hard drive already and can someone recommend a CD drive and ram?
thanks in advance

Qty.Product DescriptionSavingsTotal Price
1
ASUS GeForce GTX 770 GTX770-DC2OC-2GD5 Video Card
Item #:N82E16814121770
Return Policy: VGA Replacement Only Return Policy
$399.99
$374.99
1
NVIDIA Gift - Watch Dogs
Item #:N82E16800995199
Return Policy: Standard Return Policy
$69.99
1
Intel Core i7-4770 3.4GHz LGA 1150 Desktop Processor
Item #:N82E16819116900
Return Policy: CPU Replacement Only Return Policy
$338.99
$326.99
1
CORSAIR CSM Series CS750M 750W Power Supply
Item #:N82E16817139061
Return Policy: Standard Return Policy
$129.99
1
ASUS SABERTOOTH Z97 MARK1 ATX Intel Motherboard
Item #:N82E16813132124
Return Policy: Limited Replacement Only Return Policy
$274.99
$254.99
1
NZXT Phantom 410 Series CA-PH410-B1 Black Computer Case With Side Panel Window
Item #:N82E16811146085
Return Policy: Standard Return Policy
$124.99
$104.99
Grand Total:$1,191.95
 

A:First computer build

Holy smokes.

Possibly, no one has commented because 1. people want to hear what you are aiming for - a gaming PC? CAD/CAM? Web-surfing? etc., and 2. you sure piled on a list of pricey items without any argument for why you need such pricey items when you can do nearly as well by sliding down the price range a lot, and 3. you have not said what size the SSD is - it might not be large enough to comfortably support operating system plus a few multi-player games.

A first-time build does not have to be the ultimate Win experience. Largely, builders work for a trade-off between cost and function. For your first build, you may want to build something that is straightforward, not too expensive, and can be upgraded in the future.

If money is no object, just get the most expensive of everything and enjoy. Just make sure everything is compatible.

I am not trying to be rude. Just kinda surprised by the price tags, and the lack of responses thus far.
 

http://www.techspot.com/community/topics/first-computer-build.204008/
Relevancy 19.35%

Hi, so today I unplugged my computer while it was still running by accident. Now it wont start at all, no lights, no fans, nothing. I am concerned that it may be a problem with my power supply (maybe fried it or something). And no its not a problem with the cord (I tried a different one), its not a problem with the power switch (the one that you switch to either circle or line) because I tried it both ways. However recently my computers power button stopped working so my brother hooked up an old keyboard to my computer so to start it I will press a key on that keyboard and it will start up my computer, so I have to keyboards one to start the computer up and one to type. So in summary im not really sure what the problem is but im 90% sure it has something to do with either my "power keyboard" of my Power Supply so yeah. Any help will be apreciated
 

A:Accidentaly unplugged computer without shutting down. Computer will not start.

Try and get a psu off a friend who might have a extra one. Go from there. This way you might be able to narrow it down. It really hard to say what happen .
 

http://www.techspot.com/community/topics/accidentaly-unplugged-computer-without-shutting-down-computer-will-not-start.203970/
Relevancy 17.63%

My hard doesn't show up anymore.when I plug it in I hear 2 beep sounds coming from it and then nothing.any one now what the problem might be.
 

A:WD external Hard drive

Probably an internal hardware failure on the drive. Hope you had your data backed up from that drive.
 

http://www.techspot.com/community/topics/wd-external-hard-drive.203951/
Relevancy 30.1%

Tried just about everything but I still can't seem to get my external hard drive to show up in my disk management or computer. It say it's installed and ready to use but I don't see it.. only in the device manager and in devices and printers I can see it.. but nowhere else.. I'm working with windows 7 upgraded from windows xp but has be downgraded which was originally windows vista I think.. A friend gave me a computer and I had it upgraded.. can any one help me get my computer and external hard drive straight. Thanks.
 

A:Don't see my external hard drive in disk management or on computer

Check this thread out: http://goo.gl/rxkBN
 

http://www.techspot.com/community/topics/dont-see-my-external-hard-drive-in-disk-management-or-on-computer.203836/
Relevancy 29.67%

The Seagate Momentus 5400.6 hard drive I'm using is from my old laptop it has 4 disks.
After I put it in the (IT-CEO IT-700) enclosure, and connect it to my new laptop it does not show up in 'My Cumputer' and 'Disk Management', but displays in the 'device and printer' section of control pannel.
I also can't eject the hard drive, even when I'm not doing anything to it, the (IT-CEO IT-700) enclusre's blue signal light just keeps flashing for a while then goes off for a sec, then resume flashing again.
My laptop also keeps trying to install the hard drive.

I tried reinstall the hard drive's driver, but that did not solve the problem.

Please Help.
 

A:External Hard drive not showing up in 'My Computer', and 'Disk Management'

Have you tried using different drive enclosure other than the IT-CEO IT-700?
 

http://www.techspot.com/community/topics/external-hard-drive-not-showing-up-in-my-computer-and-disk-management.201875/
Relevancy 13.33%

Sorry for that long title. Anyway, I was watching some YouTube videos when my wi-fi suddenly stopped worked. With this, I don't mean that I'm not catching signal from my router. I mean that my computer isn't receiving signal from any network. I don't know anyway to fix this, it never happened. I also won't buy a new computer. I got this on Christmas and I think that 7 months isn't that old. Also, the only tutorial I found doesn't applies to my computer (It was for a mac ). I have no idea of how to fix this and if you know, PLEASE HELP ME!!!!!! (If you are curious of how I am posting this, it works with Ethernet connection)
It's an ASUS computer with Windows 8.
 

A:My Computer Isn't getting signal from any Wi-Fi Network

Give the following a try and see if it helps:
Go to network sharing center - change adapter setting - click on wifi and then Diagnose this connection.

If this does not help, please let us know and we can suggest something else to try.
 

http://www.techspot.com/community/topics/my-computer-isnt-getting-signal-from-any-wi-fi-network.203822/
Relevancy 17.63%

I have a Dell Precision T which I just purchased off of Ebay Recognized Possible Hard Formation, Second Not Drive Raid It came with gb of ram and gb hard drives installed In quot my computer quot it shows drive quot c quot but not the second drive This computer supports raid configurations but when I received it it had no operating system installed I installed windows ultimate bit This computer has quad core processors and I have been noticing a Possible Raid Formation, Second Hard Drive Not Recognized slower response time lately which leads me to believe it may be in one of the raid modes even though they are supposed to be faster most of the time Possible Raid Formation, Second Hard Drive Not Recognized I went into the bios and the setting it is on is to automatically detect raid configuration in the drives and if not detected the regular mode I read some information about raid setup and cannot find the software quot Intel Matrix Storage Console quot on the computer to help verify or change settings Could this be an extra program like drivers that are downloaded from the Dell website because they don t normally come with a regular windows install If someone is familiar with configuring raid formations could you please help me determine what my system is set on and how to set it properly I would be satisfied to not have raid active as I don t need that kind of constant backup My work is not that important I can back up important files in other ways nbsp

A:Possible Raid Formation, Second Hard Drive Not Recognized

What shows up in the Disk Manager vs the Device manager?
 

http://www.techspot.com/community/topics/possible-raid-formation-second-hard-drive-not-recognized.202015/
Relevancy 17.63%

My External hard drive wont open without format I try doing format it gets stuck I try opening computer > mange > disk management it wont open unless I take it out and gets stuck and gives me connecting to virtual disk service
please please help me! im freaking out I need this hard drive to work I need help
 

A:External hard drive

If you need this drive because there is data on it, formatting is the last thing you want to do.
 

http://www.techspot.com/community/topics/external-hard-drive.203628/
Relevancy 13.76%

Hello,
I bought a new mobile computer a few weeks ago,
the model is: HP 250 Business i3-3110M.
Then at home, I charged the battery and checked that everything is working properly.
In practice I'm going to use it only in a few months from now.
What is the best way to keep it until then?
Should I empty the battery, disconnect it? and etc.
thanks
 

A:New computer- not in use

I'd suggest making sure the battery is fully charged & then just unplug the AC & let it sit till you're ready to use it.
Although you didn't say what OS it is, I'd suggest you have somebody here help you remove the crapware that it don't need & install security programs
http://www.techspot.com/downloads/2695-superantispyware.html
http://www.techspot.com/downloads/223-avast-home-edition.html
http://www.techspot.com/downloads/4716-malwarebytes-anti-malware.html
http://www.techspot.com/downloads/568-spywareblaster.html
Good luck
 

http://www.techspot.com/community/topics/new-computer-not-in-use.203605/
Relevancy 17.63%

Recently a hard drive named OS (X: ) (space inserted so it isn't posted as a smiley face) appeared in my computer. It seems to be identical in memory to my actual hard drive, but is actually empty. What exactly should be done about this?





 

A:Empty extra hard drive?

Not sure off hand but I'd open up Disk Management to see what it says there.
 

http://www.techspot.com/community/topics/empty-extra-hard-drive.203533/
Relevancy 17.63%

Hello,

Old Dell computer running Windows XP that was never backed up and I am trying to recover files and photos. I get NTLDR is missing when I boot. I've used Testdisk/Photorec to try to recover my data but when going through the recovered data it seems to be all system files that I know nothing about. I used Ubuntu on the Dell to run Testdisk. I also hooked up the hard disk to my laptop with a hard disk adapter and got the same results.I also ran a NTLDR boot disk but ended up with the same NTLDR is missing message. I dont have a XP recovery disk. Anybody that has had this issue please help!
 

A:NTLDR is missing. Hard Drive Failure.

Trobles86 said:





I also hooked up the hard disk to my laptop with a hard disk adapter and got the same results.Click to expand...

If you have access to another PC or laptop then you can connect the hard drive in to that machine and get the files you wanted to recover from your hard drive in there.
 

http://www.techspot.com/community/topics/ntldr-is-missing-hard-drive-failure.203104/
Relevancy 13.33%

Hello,
I gotta Seagate USB 2.0 500 GB Expansion drive. Its been working just fine on my computer up until a couple days ago. For some reason the latest windows 7 update must have messed up the formatting of it, now its not being recognized on my laptop at all. Shows up as a local disk...very frustrating. I've tried almost everything I could think of. I've tried assigning a partition letter in disk management, uninstalling the software, trying it on different computers, system restore...nothing. I don't wanna result in having to reformat it and lose what I got. Could somebody please help me???
 

A:Seagate HDD not being recognized by my computer

You may try to scan and check your hard drive for possible errors using Seagate's Seatools for Windows.
 

http://www.techspot.com/community/topics/seagate-hdd-not-being-recognized-by-my-computer.203258/
Relevancy 17.63%

Please help my segate external hard disk 500 gb not working all of the solutions are not working please any solution but not that solution of computer manage please help and replay fast

windows 7 (64)
 

A:Seagate external hard disk

Man... that sucks. If ALL solutions are not working you are screwed.

Please read the link in my signature and try again.
 

http://www.techspot.com/community/topics/seagate-external-hard-disk.203299/
Relevancy 13.33%

After updating the Windows XP to Windows 7, my computer becomes really slow and recently often receives a low disk space message. And there is only 3GB of free space left on my system partition. So, I think it is the time to extend my system partition space. But, I am not so familiar about the partition expanding things and don?t know what to do. Do you have any idea for me? Please, give me some suggestions! Thanks!
 

A:Computer partition space problem

Can you post a screenshot of Disk Management, so we can better understand what you are dealing with?
 

http://www.techspot.com/community/topics/computer-partition-space-problem.203271/
Relevancy 13.33%

Are these good statistics for gaming
Processor Speed:
3.40 GHzOperating System:
Windows 7
Memory:
12 GBScreen Size:
None
Hard Drive Capacity:
1 TBProcessor Type:
Intel Core i7 4th Gen.
Operating System Edition:
Home Premium
Brand Alienware
This is an alienware x51 R2 with the below specs

i7-4770 processor @ 3.40GHz

Kingston HyperX Blu 8GB (1x8 GB Module) 1600MHz 240-pin DDR3 Non-ECC CL10 Desktop Memory KHX1600C10D3B1/8G

Kingston Hyper X Blu 4 GB 1600MHz DDR3 Non-ECC CL9 Desktop Memory (KHX1600C9D3B1/4G)

1TB HDD

GTX 660 Alienware OEM Version

Blu-ray slot load player

Windows 7 home premium disk

Cyberlink PowerDVD 9.6 disk

330W power brick

Alienware mouse and keyboard
Intel Network 7260.HMWG WiFi Wireless-AC 7260 H/T Dual Band 2x2 AC+Bluetooth HMC is this good for $200

It is used

Also as you can see from specs I upgraded the RAM and the wireless card.
This auction will not include the old RAM.

12GB RAM
 

A:Is This computer good for gaming?

Price? It's probably overpriced Alienware junk, even if 2nd hand. GTX 660 isn't gonna let you max out games at 1920x1080, and it can't be upgraded.
 

http://www.techspot.com/community/topics/is-this-computer-good-for-gaming.203214/