Not sure if this is the right subforum I contacted Samsung and they were no help I sent them a reply but in the mean time I am trying here My message to them is as follows I'm having trouble using Bluetooth in Windows Ultimate bit with my S When I go to the My Computer icon and try to open my phone it won't let me I can play music etc just can't access the files on the phone through Bluetooth I see in device manager on my laptop that there are two drivers missing for Other Bluetooth phone computer and on full to Getting my work Devices Bluetooth Peripheral Device I have the following hardware IDs BTHENUM da f- abd- d d- c - af c a VID amp Getting full Bluetooth to work on my phone and computer PID amp BTHENUM da f- abd- d d- c - af c a LOCALMFG amp f BTHENUM d -d b- f - -b f ba ec VID Getting full Bluetooth to work on my phone and computer amp PID amp BTHENUM d -d b- f - -b f ba ec LOCALMFG amp f My Bluetooth adapter is USB and it is a BCM Bluetooth What I'm trying to do is read the files on my phone in my computer with Bluetooth See attached images TIA Edit- I should mention that I installed a very large Bluetooth driver package from HP for the Broadcom Bluetooth USB adapter I have hoping that would fix the problem No joy Getting full Bluetooth to work on my phone and computerhttp://www.bleepingcomputer.com/forums/t/600915/getting-full-bluetooth-to-work-on-my-phone-and-computer/
I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.
I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.
You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)
After going through lots of programs and cleaning out an infection, I restarted it and it is almost totally unusable. I can confirm that both mouse and keyboard work, mouse light is on, and keyboard lets me open the calculator. Any help please? Thanks.
If the mouse is USB (not a PS/2 connection), try disconnecting and then reconnecting. You could also try a different USB port for the mouse.
Hi, I have decided to buy a new computer(or the parts for one).
It will be the first time I assemble one so I would like a little
help from the people on here that has some experaince with computer hardware,
because I myself do not know very much about it.
I have done some research and this is what I came up with:
Motherboard : Asus Z97-A Intel Z97 4xDDR3 SLI CrossFireX Socket 1150 ATX
CPU : Intel Core i5-4460 3.2GHz Socket 1150
RAM : Crucial Ballistix Sport DDR3 DIMM PC12800/1600MHz CL9 2x4GB
GPU : Gigabyte GeForce GTX 750Ti OC 2GB D
PSU : CORSAIR PSU 550W VS550
Hard Drive : Western Digital WD20E, 2TB, SATA 6 Gb/s, 3.5", IntelliPower, 64MB
What I want to know is if all these parts will fit together and if it is a good
computer? I want a fast computer thats good at a bit of everything. What I will be using it for mostly is programming, games like bfbc2, downloading/watching movies/tv series and just browse the internet.
And I think I will be using mint as my os(still new to linux).
I think those are great choices.
I just bought these I will return them if need be so don t pamper me http www newegg com Product Product aspx Item N E Question one these Questions about computer speakers speakers plug into my old jack front speaker port on my mobo should I use the center sub-woofer port instead Should I have bought some kind of HDMI or SDPIF speakers instead If so how much better are they My video card nvidia has extra hdmi ports my Questions about computer speakers mobo has a spdif port Should I buy sound card speaker combo Is my mobo and or video card just as good as a good sound card Should I download some software to compliment my new speakers Do I need to change any settings on my computer to take advantage of them In the control panel should I up the quot quality quot from bit hz studio Virturilze sound Boost enhance Will loudness equalization hurt my coolness nvidia g gaming http www newegg com Product Produ e nvidia g gaming- - - - - -Product Mobo z m pro http www newegg com Product Produ amp cm re z m pro - - - - - -Product p s my old speakers were like years old I don t even see where to adjust the bass p s s I use my speakers for music and gaming ps was trying to spend on a speaker upgrade flac is wow nbsphttp://www.techspot.com/community/topics/questions-about-computer-speakers.217390/
Hello I am new to building the pcs so I am afraid I may have fried mine I really am pry I did not but this is what happened I finish tower Power will not work button My the pc and My tower Power button will not work when I turned on the power supply the power button on the motherboard glowed so then I pressed my tower button and nothing worked so then I re setup he F PANEL cords u know the pwr switch and all that jazz turns out it was set up wrong so I put them in right and tried to turn on the computer again the power button on the motherboard turns on but not my towers power button and so my pc will not officially turn on I am guessing and I am worried that I may have fryed my pc because when I took out the f panlle cords I realized my pc was still on and turned it off immanently and I am afraid that may have fryed the motherboard if anyone can help me it would be wonderful I am freaking out and have no Idea what the problem thank you for reading P S My tower button does not making a clicking sound when you push it I am not sure if that normal or it is broken or somthing it just doesnt make any click sounds nbsp
You could have a defective power switch on the PC case. Test this by using the reset switch as a temporary power switch. The power switch and the reset switch are the same for practical purposes except, of course, the size of the button (on most cases). If the reset switch works and is able to start the PC, then you know the power switch is defective.
I recently bought a Windows DVD to put it on the new PC I'm building for my mom. That PC has troubles with the DVD drive itself (stupid motherboard doesn't have IDE..), so I figured I'd set up a bootable USB to install Windows before the adapter arrives. Problem is, the installation DVD isn't playing on my drive (I tried another DVD with a movie on it before, so I don't think its my drive). I brought it to a PC shop and for them it worked fine, even though its quite scratched on the back (I guess the person selling those DVDs doesn't know how to ship them properly) I didn't wanna pay 20 bucks for them copying the DVD, even though I'll probably end up having to do that.
Any ideas what the problem is, or what I can do? I'm not sure if the DVD will work in my moms drive either..
I have an Aspire one NAV50 with Windows 7 starter.
One time, when I turned it on, The icon for wireless connection doesn't appear anymore. Every time I try troubleshoot it, it would just say that there is an ethernet cable unplugged. And so, I connected it into the ethernet cable and it works fine. But when I tried it again on the wireless connections, it doesn't locate to any wireless connection.
I've tried the ff on my laptop:
scan the laptop with MalwareBytes
by the way, last night, when I turned on again the laptop, the wireless connections can already be found. However, after few minutes, it went back to being unlocated again.
I had doubt the Starter supports the Wireless connecting but since you say " the wireless connections can already be found.", so probably it's possible.
In this case and at the moment the thing I'm thinking about is the driver. Try to update its driver for wireless connecting. (You've said the 'update', but update of what?).
hi there my wireless through cable work will not My only ethernet internet internet was My internet will only work through ethernet cable not wireless running fine until yesterday when I tried to connect to the internet the message quot windows can t communicate with the device or resource primary dns server quot came up I followed all methods on this website http answers microsoft com en-us w -b d ec fae but none of them worked for me I then returned my laptop to factory settings in the hope it will work but that didnt not work I then realised it works through the ethernet cable but not wireless I ran ipconfig all with my ethernet cable in and this is the result SOMEONE PLEASE HELP ME THANKYOU Windows IP Configuration Host Name Nida-TOSH Primary Dns Suffix Node Type Hybrid IP Routing Enabled No WINS Proxy Enabled No Wireless LAN adapter Wireless Network Connection Connection-specific DNS Suffix Description Realtek RTL CE Wireless LAN n PC I-E NIC Physical Address D -DF- A-EB- -B DHCP Enabled Yes Autoconfiguration Enabled Yes Link-local IPv Address fe d fccc e c eb Preferred IPv Address Preferred Subnet Mask Lease Obtained October Lease Expires October Default Gateway DHCP Server DHCPv IAID DHCPv Client DUID - - - - -EB- A- A-B - -F -D - -E DNS Servers NetBIOS over Tcpip Enabled Ethernet adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description Realtek PCIe FE Family Controller Physical Address B - -F -D - -EF DHCP Enabled Yes Autoconfiguration Enabled Yes Tunnel adapter isatap EEB-B - C-AC - CEB F Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter Local Area Connection Connection-specific DNS Suffix Description Teredo Tunneling Pseudo-Interface Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes IPv Address ef fb affc eb Pre erred Link-local IPv Address fe affc eb Preferred Default Gateway NetBIOS over Tcpip Disabled Tunnel adapter isatap DF D AB- BF- FA - CB -DFA C Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes nbsp
There may be an issue on the ISP side or router side since restoring to defaults didnt help. Or it could be an issue with the network adapter. Or it could be an issue with the firewall.
Try downloading running these tools (download via ethernet, run on wireless): Network Fix-It Tool (right click on the internet bars on the task bar in the bottom right hand side of the screen, and click "troubleshoot network...") and Firewall Fix-It Tool.
Did you install anything on your PC before this happened? Did Windows install any updates?
Try disabling your AntiVirus. That may be the issue. I doubt it though.
Tell me if any of these solutions help.
I have a Sony Vaio VPCEH15EN laptop & the OS is Windows 7 home basic. I have a wifi router which is of TPLINK.
The wifi won't connect to my laptop but it works fine on my mobile..it would only start working when I use the ethernet cable. I never had this problem before. I have tried everything ..I also tried the winsockfix.bat but all my efforts have gone in vain..I just don't know if the wifi router is faulty or the modem of my ISP...Please help me solve this problem.
I have solved the problem by myself. To do this, first you have to disconnect your Ethernet cable from your laptop and follow the steps: Start>Control Panel>Network and Sharing Center>Manage Wireless Networks and remove all wireless connections by right click on it and select Remove network from the drop down menu. After doing this, close the windows and scan for the Wi-Fi networks. Click on the available network and select connect. After a while, you will be asked to give a password for your Wi-Fi connection. Type the password and click on connect button. And now will be connected to your Wi-Fi network via wireless.
May be it will help you.
MD. MAHMUDUL HASAN
Hi! I don't know much about this place but there's a problem with my laptop and I don't know how to solve it. My laptop won't connect to the wifi anymore but it works perfectly fine with the ethernet cable. I appreciate it very much if you tech geniuses could help me out. THANK YOU!
Are there any yellow (!) in the device manager?
Memory is a key component in any computer and without a sufficient amount on tap, the entire system will feel sluggish regardless of what other beefy hardware you might be running.
16GB... Because I love keeping numerous Chrome tabs open.
Hi guys I ve been researching and trying to days to get this to work with no avail so I decided to post here for some help as doesn't Ethernet connected Wifi work cable. using working when only Internet I see this community is really active We ve got different laptops here and none of them can connect to the wifi anymore it suddenly stopped working for the last whole week We can connect to the internet through ethernet cables though We only use one at a time if ethernet then wireless is disabled and vice versa Here is a copy of the ipconfig all Windows IP Configuration Host Name PeterMai-HP Primary Dns Suffix Node Type Hybrid IP Internet only working when connected using Ethernet cable. Wifi doesn't work Routing Enabled No WINS Proxy Enabled No DNS Suffix Search List moolahd local Ethernet adapter Local Area Connection Connection-specific DNS Suffix moolahd local Description Realtek PCIe GBE Family Controller Physical Address AC- - D- B-ED-F DHCP Enabled Yes Autoconfiguration Enabled Yes Link-local IPv Address fe ac a d b Preferred IPv Address Preferred Subnet Mask Lease Obtained Monday October PM Lease Expires Tuesday October PM Default Gateway DHCP Server DHCPv IAID DHCPv Client DUID - - - - - -FB- -AC- - D- B-ED-F DNS Servers Primary WINS Server NetBIOS over Tcpip Enabled Wireless LAN adapter Wireless Network Connection Connection-specific DNS Suffix Description Broadcom GN b g n x Wi-Fi Ada pter Physical Address -ED-B - D- -FD DHCP Enabled Yes Autoconfiguration Enabled Yes Link-local IPv Address fe c f e e b fc f Preferred Autoconfiguration IPv Address Preferred Subnet Mask Default Gateway DHCPv IAID DHCPv Client DUID - - - - - -FB- -AC- - D- B-ED-F DNS Servers fec ffff fec ffff fec ffff NetBIOS over Tcpip Enabled Tunnel adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description Microsoft to Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter isatap optusnet com au Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter isatap moolahd local Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter Reusable ISATAP Interface CE FC E - F - C C- D - D EBEC Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter isatap DDFAF D- B- -AA A-DBE BA F Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter Reusable ISATAP Interface E ED - - A -BB -FB FA F F Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes And here is a copy of the route print Interface List ac d b ed f Realtek PCIe GBE Family Controller ed b d fd Broadcom GN b g n x Wi-Fi Adapter Software Loopback Interface e Microsoft to Adapter e Microsoft ISATAP Adapter e Microsoft ISATAP Adapter e Microsoft ISATAP Adapter e Microsoft ISATAP Adapter e Microsoft ISATAP Adapter e Microsoft ISATAP Adapter e Microsoft ISATAP Adapter IPv Route Table Active Routes Network Destination Netmask Gateway Interface Metric O... Read more
You have an IP on your LAN, but none on your wifi. Check your router to make sure DHCP for wifi is turned on and you have enough available addresses.
Just checking it seems like something is not wife's on this - my Keyboard - - found disabled getting computer of EPP tired still wrong on this computer just using a standard plain usb keyboard All of a sudden this morning when she was changing a plain ordinary mouse the keyboard quit working it works on Keyboard not found - EPP - disabled - getting tired of this on my wife's computer another computer the mouse works while using the same usb port in device manager there is no entry for Keyboard in devices and printers way down at the bottom a quot usb multimedia quot keyboard shows but when I try to look at the drivers there are several drivers and I cannot delete or disable any Looking at the HID compliant consumer control device driver details there are no drivers Device Manager Keyboard shows keyboard there are speed settings but in the hardware tab no name manufacturer location or device status Just in case with all of the problem we have had lately I did some scans the dss scan seems strange Is it mbam Windows Service Pack x NTFS Internet Explorer Motherboard FOXCONN Keyboard not found - EPP - disabled - getting tired of this on my wife's computer AB Processor AMD Phenom tm II X T Processor CPU mhz Disk Partitions C is FIXED NTFS - GiB total GiB free D is FIXED NTFS - GiB total GiB free E is CDROM F is Removable G is Removable H is Removable I is Removable J is Removable K is CDROM M is NetworkDisk NTFS - GiB total GiB free P is NetworkDisk NTFS - GiB total GiB free R is NetworkDisk NTFS - GiB total GiB free S is NetworkDisk NTFS - GiB total GiB free T is NetworkDisk NTFS - GiB total GiB free Something is rotten in Denmark nbsp
Some place I saw a message that windows updates was set to no update hareware files, but I can't find where to change that.
I have scoured the internet for months, and I couldn't find anything. I even checked an old article from this website, which didnt help. I have tried most obvious things, such as disabling stereo mix, though and help at all is accepted because you never know. Thanks.
Hey guys... I just got a new EVGA GTX650 ti boost superclocked. I just put it in and I was not getting any signal to my monitor. I tried VGA, HDMI and DVI. Nothing worked and when I took it out to try booting with my integrated graphics, I didn't get any signal to my monitor. All of my connections and wires are connected properly, my power supply is the right voltage and has enough power to support my graphics card. My hard drives are spinning but I cant access my BIOS. I have tried everything that is common. I know my graphics card is not defective and im thinking that it might be my motherboard. Any suggestions?
You were using integrated graphics before the discrete card? It's strange that your onboard isn't working if it was before hand. Usually it's just a overlooked cable or something plugged in the wrong place. Did you make any changes to BIOS? Some boards require you to change the primary display adapter to PCIE or onboard. Maybe a BIOS reset will help the situation. I doubt there is any issues with the MOBO itself. I suggest stripping the build down to nothing but the bear essential components for operation. This way you can isolate the issue a lot easier.
Hello I have a tower just recently bought all the parts from newegg and was building the tower for the last days I had everything put in as it should be and initially it stayed on but no image was portraying problems up boot Building computer on the monitor A friend explained I was using the wrong port to portray image as it should be through the video card I should be connecting it but after troubleshooting the problem Building computer boot up problems initially I removed RAM and put it back in but computer now turns on for a second then right off I hear and see the fans running the dvd drive spinning and the lights go on but then it shuts right off after another - seconds it turns on again and then after another second turns right back off in an endless cycle until I turn it off completely and unplug it Not sure what the next steps are or if I should return the moba for an exchange After reading a lot of forums I noticed that it could be the RAM was improperly placed so I tried many times to take it out and put it back in but same problem keeps occurring I hear no beeps and only hear a click from the power supply when it goes on I tried the psu tester on the power supply and it tells me it should be working fine Any one have any idea moba ASRock Z M Pro Micro ATX Intel Motherboard ram CORSAIR Vengeance GB x GB -Pin DDR SDRAM DDR PC Desktop Memory Model CMZ GX M A C B power EVGA -G - -XR W Power Supply case Thermaltake Level Series Level GT VN W N Black Computer Case processor Intel Core i - K GHz LGA BX I K Desktop Processor video card EVGA GeForce GTX Ti G-P - -KR FTW w ACX Cooling Video Card Please someone help and thanks to all nbsp
Okay, I've had the same issue with a new build: Put it all together, switch on the power and basically nothing. Do the following tried and true diagnostic steps that can be tedious but costs nothing to do and can often zero in on your issue:
1. Uninstall everything from your motherboard and disconnect all peripherals from your power supply except psu to motherboard, cpu, and one stick of RAM. Now turn it on. If it boots up and stays booted then shut it down and then...
2. Add your second stick of memory -- nothing else. Repeat by booting up and if it stays booted up then...
3. Start adding one piece of hardware at a time and repeat as directed.
What are your findings?
I'm trying to connect my PC and my Asus Zenfone 2 with Bluetooth. When I use the "add a device" wizard on Windows 8.1, my mobile phone is detected, but when I try to add it I get: "Windows doesn't have a network profile for this device".
Also, when I try to detect my computer with my mobile phone, itīs not detected.
I'm using a Trust USB 2.0 dongle Bluetooth adapter (the little one you insert on the usb port) that came with a keyboard and mouse Bluetooth set that I used. Could that dongle be designed only for the bluetooth keyboard and mouse set?
The Bluetooth device seems fine as it already detected your keyboard and mouse. However, your phone seems not supported with the current Bluetooth device and you might need to take another look.
I heard there's some certification to mount ESD safe equipment (ESD mats, etc) at computer workshops and other ESD safe environments. Could I get this certification myself in London? Is it expensive?
OR domestic (U.S) http://www.dekra-certification.us/en/electrostatic-discharge-esd
So I'm building a coomputer for my first time and have already selected parts that I think would be good. Not sure though as this is all new to me, but basically I just want a good computer capable of running a flight simulator in high quality graphics. So I just want to make sure that everything is compatable with each other, and if you have a part that would be better than what I have listed, please recommend. The list of parts I have come up with are as follows:
Case: Xigmatek Soundwave ATX Mid Tower
Power Supply: Cool Power Performance CP P600 204 pin ATX Power Supply w SATA PCIe & Dual 12V Rails
Mobo: MSI ATX DDR3 2133 Motherboard 970 Gaming
CPU: AMD FX 4350 Unlocked Quad Core Processor 4.2 4
RAM: Corsair Vengeance 8gb (2 x 4gb) DDR3 1600 MHz PC3 12800 240-Pin DDR3 Dual Channel Memory Kit
Optical Drive: Asus 24x DVD-RW Serial-ATA Internal OEM
Audio Drive: Asus Xonar DG Headphone Amp & PCI 5.1 Audio Card
Video Card: MSI GTX 960 Gaming 4G
Hard Drive: Western Digital Caviar Blue 500gb SATA III 7200 RPM 16mb Cache Bulk/OEM
Then I will be installing Windows 7 Home Premium.
Give us your budget.
I am considering purchasing a MSI ATX DDR3 2133 Motherboard 970 for my new computer build, and heard from somewhere that it is not compatable with windows 7? Is this true?
Where did you hear that? It will run Windows 7 just fine.
ASUS ROG G751JY-DH72X Intel i7 2.40GHz 32GB Memory 512GB SSD GTX 980M 4GB Laptop
Intel Core i7 4860HQ 2.4GHz
32GB Memory 1TB HDD 512GB SSD
NVIDIA GeForce GTX 980M 4GB
17.3-inch (1920 x 1080)
I'd say it's a good CPU, but note that you won't be able to upgrade it in the future as it is soldered onto the motherboard.
As I don't go menu and Monitor's won't buttons the work away am writing this I have this blue square on the screen with all the settings for this monitor Whichever button I press on the monitor the menu won t go away Not even the power button works so that means I can Monitor's menu won't go away and the buttons don't work t disable Monitor's menu won't go away and the buttons don't work the monitor Unplugging and plugging it back in doesn t work as soon as the picture appears the menu appears Monitor's menu won't go away and the buttons don't work as well Let me give you a bit of a history as it might help determine the cause About a month ago my old monitor monitor started behaving weird It started turning itself off every now and again Sometimes few times a minute Every time it turns off it turns back on with the splash screen saying quot BENQ quot and everything I had no idea why it does that I tried pressing the buttons on it to go into the menu but every button seemed to shut it off and every button seemed to turn it on So I gave it to a family friend to try and fix it He said that the quot control board quot started dying and that he doesn t have a spare one or something like that He then gave me a spare monitor of his monitor until I can buy a new one or fix monitor So I took monitor from him and sent monitor to the shop so they can try and fix it About a week passes and the shop calls and says that they fixed monitor I go and pick it up and when I came home I unplug monitor and plug in monitor monitor was working perfectly then Monitor worked for about minutes and started shutting down again And when I tried using the buttons they wouldn t work again Same thing as last time So I return it to the shop and tell them that it doesn t work That was about a week and a half ago They still didn t fix it The problem is now the monitor also started having problems It doesn t turn off yet but the menu buttons don t work Power button doesn t work Nothing And on top of that the menu won t disappear from the screen As I am typing this there s a menu on top of everything Every now and again the menu will switch to a different option like quot brightness quot quot auto adjustment quot and such like the buttons are being pressed Now I am wondering could it be that my PC is quot breaking quot these monitors Is there a way for a PC to physically damage a monitor What should I do in that case Also I should say that ever since monitor died and after I installed monitor my PC has been getting blue screens of death It hasn t happened once in years since I got this PC and it started after I got monitor I don t know if that s something that s important but there it is If you need more info please let me know I am trying to figure out what is happening and every bit of help is appreciated Thank you nbsp
No one has any relevant information?
Angry!!!Last week I bought a mobile phone named HTM ?and the model of the phone is XH292W.
But when I receive this phone, it seems the quality is not good, although phone?s functions are complete,it has 5MP camera?1GHZ dual core? but it always delay to running.
I searched some info about it on the Internet. Someone said that the phone is producted by a OEM named Wingtech?But I never heard about this OEM . Do you know?
Now, I wanna returned goods.And buy other one.
Who can help me to recommend a mobilephone? Thanks a lot???
PS.Never buy HTM's mobilephone .
What's HTM? Is that GrayHandset copy HTC?
I have a HP Pavilion Elite m9600t CTO Desktop PC that has 2 drives. One which clearly says it can do lightscribe and burning, however, everytime I try to burn a disk using any software(I've tried a couple) it says no drive that can burn was found....
Config Flags 0x00000000
It's kinda driving me crazy to the point where I'm not sure if I'm wrong or its wrong. Here are the drives I have:
ATAPI DVD D DH16D3S
Device ID IDE\CDROMATAPI_DVD_D__DH16D3S____________________SH12____\4&A9C04EF&0&0.1.0
Status 0x0180200a Started
Problem 0x00000000 (0)
Manufacturer (Standard CD-ROM drives)
WJWDG UBKDE3C5U3 SCSI CdRom Device
Device ID SCSI\CDROM&VEN_WJWDG&PROD_UBKDE3C5U3&REV_1.03\5&36E5972&0&000000
Status 0x0180200a Started
Problem 0x00000000 (0)
Config Flags 0x00000000
Manufacturer (Standard CD-ROM drives)
They both appear to be ROM drives when reading the spoiler info.
The best I can tell, here is the "ATAPI DVD D DH16D3S" which is a ROM drive.
I can not find the second listing with the details provided. I'm assuming that is the drive pictured in the screenshot.
HP Pavilion Elite m9600t Desktop PC Product Specifications
Primary Optical Drive
Must select one of the following options:
16X DVD(+/-)R/RW 12X RAM (+/-)R DL LightScribe SATA
Blu-ray player & SuperMulti DVD burner with LightScribe Technology
SuperMulti Blu-ray Disc burner with LightScribe Technology
Click to expand...
There is lack of detail on HP's site as to which specific drives were used. The drive you pictured is not Blu-ray, so I'll assume the first listed drive is the one you have. The drive may need to pulled out of the case, to find out for sure which unit was used.
I recently moved my computer from one side of my desk to the other and somehow it managed to make it so when I press the power button nothing happens. I've disassembled and reassembled the computer numerous times and tested the psu. The psu is working and it seems like the motherboard is the culprit. What is confusing me the most is that when I short the 24 pin connector to the motherboard then plug it in if I also press the power button I can turn on the computer. I dont see that as a permanent fix just in case it sleeps and I assume it is not good for the computer so I am looking for help on how to permanently fix my issue. Thanks in advance.
I have scoured the from computer, sounds" can speakers "computing my hear my through I internet for a solution to this and have found nothing First my dxdiag is attached I have had this issue for over a year now and I am getting fed up If I put my ear to my pc I can hear computer noises coming from it I can not compare it to another sound as there is nothing else to compare it too it just sounds like my CPU or Hard Drive thinking That doesnt bother me though I expect my computer to make some noise HOWEVER I dont expect to hear it in my speakers too I have a lot of speakers and a lot of headphones no they are not I can hear "computing sounds" from my computer, through my speakers the problem Right now I am using a knappenberger tube hooked up to a GK MB just cuz I can When I plug in any speakers I can hear the CPU sound through them regardless of the volume level I can turn the speaker all the way down and yet the sound will come through This leads me to believe I can hear "computing sounds" from my computer, through my speakers it is a grounding issue or electrical to some degree I would like to try physically grounding my case to see if it would eliminate this God awful feedback However I can not find a guide as to I can hear "computing sounds" from my computer, through my speakers the best way to do this or any other suggestions So here I am Help me and earn my eternal gratitude Some notes If I unplug all of my cables except power and the speaker cable I still hear it if I plug in my speaker cable to my monitor instead of my PC I still hear it Front port still hear it I have yet to try a different sound card as I dont have one Once I find one I will update nbsp
Checked some settings in the Bios, noticed the sound isnt there while navigating it. Static started once windows loaded. Maybe it is some sort of issue with the hard drive
I have a Gateway NE56R and ever since I updated to windows 8.1 I cannot use the internet at home even though it says it is connected to WiFi, but it works at other places. Please help asap
As the title implies I m currently having issues the first major issue is that my PC is turning on off and which the second is that my other hard drive suddenly up and Issue Invisible & HDD Computer Grounding disappeared on me My computer started to turn on and off on me for no reason while I was trouble shooting my initial problem of the HDD when I fiddled around inside my case Eventually ripping everything out of the case and quot card-boarding quot the motherboard which it worked and stayed on and as I gradually put everything back together it was all good until I sat the motherboard back onto the brass copper studs that sits inside the frame and screwed it in At that point my computer started to turn on and off again which lead me to believe it s some manner of a grounding issue Computer Grounding Issue & Invisible HDD I have no clue on what to do at this point about going about this should I just get a new case made of plastic My current full tower case is all steel While I was watching a movie which was stored on my second hard drive is started to freeze lag repeat all that good stuff on me It froze my computer up completely and I was force to hard reset the computer when I booted my PC back up I found that my second hard drive had up and vanished on me So I went into my bios and saw it quot working quot I switch to ACHI to see if it ll make a difference but I got a BSoD so I left it at IDE At that point my computer gave me the option to quot repair windoe files quot or start normally Both options made my computer get stuck on the loading screen thankfully safe mode boots up fine So what could had caused this and how may I go about fixing it nbsp
I also swapped out the PSU with a spare I had lying around, didn't get any power from it so I reused my old one. Now I don't have power from that one either. So besides the "missing" HDD and a suddenly a "no longer working PSU "I'm assuming the motherboard is bad, opinions?
Okay so I am having an issue working out if my case will be able to hold my motherboard and graphics card Case Details Available Color Black Materials Steel body plastic Dimension x x mm x x inch (I Computer Building my First setup) changed W x H x D Net Weight kg lbs M B Type Micro-ATX ATX quot Drive Bays exposed quot Drive Bays exposed hidden quot Drive Bays hidden I O Panel USB x int USB x Mic x Audio x supports AC HD Audio Expansion Slots Cooling System Front mm fan x optional or mm fan x Building First Computer (I changed my setup) optional Rear mm black fan x pre-installed Side left mm or mm fan x optional Side right mm fan x optional Building First Computer (I changed my setup) Power Supply Type Standard ATX PS EPS V optional Maximum Compatibility VGA card length mm inch with HDD cage CPU cooler height mm inch Now Ill list my other parts I have They should Building First Computer (I changed my setup) also be links if they are not links just search the name WD quot Green TB WD EZRX SATA M RPM HDD Patriot Signature GB Kit Gx DDR - - PSD G KH Samsung SATA x Black DVD RW Gigabyte N - GI N SL- GL DDR GT PCI-E VGA Card Intel BX G Pentium G GHz MB LGA ASRock H M Anniversary Motherboard nbsp
From the case details you have supplied (Motherboard type: Micro ATX or ATX and maximum video card length of 320mm) you are well within the parameters of having everything fit.
ASRock H97M motherboard is a Micro ATX board.
Gigabyte N730-2GI video card is 185mm in length.
Neither my keyboard or mouse are working on any of the 7 USB ports on my computer. My mouse was initially working, but I read somewhere if you delete the keyboard drivers you can reinstall them and it will work again. BUT when I was doing that I stupidly uninstalled my mouse driver so now NOTHING works. I can't try if it works in safe mode because my keyboard doesn't respond when I hit f12 during boot up.
When I plug in the mouse or keyboard, I get a window that pops up asking if I want to install the hardware, but it's impossible for me to do anything because my mouse and keyboard don't work! If anyone has any ideas I would greatly appreciate the help. Thanks!
First I would try to find a different working keyboard because you should at less be able to boot into safe mode because the drivers don't even load until windows start loading.
Have a nice pair of Bluetooth headphones and trying to get them hooked up to the sound of my older TV. Is there some kind of adapter you can buy to to hook up to the audio out of the TV so I can connect the 2 via Bluetooth? I just don't wanna pay for another pair of headphones. I just want the reciever.
I have done some research and have not found a solution to my problem.
I plug in my HDD (Fantom Drive, Green Drive) and I hear the 2tone sound when I plug it into my USB2.0 port.
My computer then searches for a driver. It decides a suitable driver for what I plugged in is called "Initio Default Controller". I got this information from the Device Manager.
I have looked in my "computer and right clicked "manage". The HDD is not listed. I have used more than one USB cord, ports, and 2 different computers with the same problem.
Both the computers are running windows 7 64bit. One is a laptop (ASUS) and a desktop(HP).
Can someone please help me with this problem.
So I said the facts but I never mentioned exactly what the issue is. sorry.
When I open my computer when the external HDD is plugged in, it's not there. I can't save files in it, open anything, it's just not there.
Also the icon that pops up that lets you "remove hardware safley" in the bottom right is not there. Also the external hard drive does not show up on any programs like "Defraggler" or "Speccy"
With Broadwell and Skylake desktop CPUs expected to launch next quarter, the urge to upgrade my computer has never been stronger.
Got an i5-2500k in my gaming computer, and a C2Q Q8200 in my home server. Because of the small enclosures they are in I have not overclocked them, with the watercooled 2500k being in a Prodigy case stuffed to the gills, and the Q8200 is in a 2U rack case.
Not sure about the server, but I know with Star Citizen in the distant horizon, I'm very compelled to upgrade around the end of the year. This is driven less by my CPU and more by my graphics card (watercooled GTX 570) and memory, which I only have 8GB.
edit: oh yeah, and my XPS 12 has an i5-4210.
A factory AMD or Intel heatsink is something I simply won't consider when building a computer. I acquired my first aftermarket cooler 15 years ago to assist in overclocking an AMD Athlon 500 (it reached 800MHz with help from a...
Mine is water cooled. Except instead of liquid its solid. And instead of water its aluminum. And instead of a pump its got a fan. Its actually a laptop.
My PC with windows 7 is the only computer with issues in the house. Ethernet works perfectly but wifi doesn't even when I don't have the ethernet hooked up. The wifi says it is connected but browsers, steam, and Itunes don't work. I have Bitdefender A/V and already tried uninstalling it, no change. I also uninstalled steam and Itunes with still no change. I even uninstalled and reinstalled the drivers for the wireless adapter. I tried looking and I don't recall downloading or installing anything around the time the problem started. Before I try replacing the adapter itself, I was hoping for help here since I saw a very similar problem in another thread.
If there is any more info I can give to help you help me, please let me know.
I have an Acer that spontaneously decided I no longer needed to play games. Everything else works perfectly fine. It's been doing this for the past few weeks and I've done all that I can. I'm no tech wizard by any means and I need some help. Pretty much it'll open to the load screen for a few moments then disappear back to my home screen. Any ideas on what it could be and what I can do?
These are the specs:
Acer Aspire V5 Touch with Windows 8.1
Model number: Z5WV2
If you need more info let me know, I still have everything for it.
If you are talking about the games that are loaded by a app. You will need to uninstall the app. Then reinstall the app. I have no ideal why this happens . But I have seen it more then once.
I've tried multiple smartphones over the past few months, but the more I use them, the more I hate them.
Phone: they have buttons on the side and front, so unless I hold the phone like some delicate photograph, the phone goes crazy with unwanted buttons pressed. Useless.
Web browsing: the screen is too small to read, even with reading glasses on. Useless.
Music: the battery dies after a few minutes of music. Useless.
Texting or email: the tiny keyboard is constantly hitting the wrong keys. Or sometimes, the autocorrect will change words I typed correctly. Nobody can figure out how to turn off autocorrect, including phone salesmen. Useless.
Battery life: the phones often die after being unplugged for an hour. Useless.
Glass surface: despite daily wiping, the glass looks greasy, encrusted with slime. It makes me hate looking at it or touching it.
Camera: the unwanted camera takes several unwanted pictures a day while I am trying to do other things.
So what should I do? If I get a non-smart phone, then people call me a geezer.
I'd call you a geezer after reading this post tbh.
Hi all. I've got this issue with my graphic card (fresh and crispy by the way - 1 month old). Few days ago I was just browsing web when suddenly blue screen came out of nowhere on my Windows 8.1 desktop PC. Ever since then when computer boots screen is filled mozaic-like with green squares, after few seconds it's changing to vertical lines. Obviously Windows window manager won't open at all, and it greets me with black screen. After I deactivated graphic card, and switched cable to main boards VGA port computer runs ok.
I've seen some similar threads on techspot suggesting that due to escessive dust 'consuption' GPU can overheat and irreverisbly burn therefore. Is it possible that the same thing occured here?
It's what I've seen on the screen when one of my graphics cards has died. As it's almost new changing it shouldn't be a problem. It's more likely to be a faulty graphics card than dust. Double check that it's seating properly in its port and that the video cable is OK.
Can I run 1600mhz ram on a mb which is supported 1333mhz (my config MSI-760gm P21-FX 1gb asus amd radeon 5450 gfx card And 4gb rm of 600mhz.
1600 MHz RAM should down-clock to 1333MHz just fine, but I will not make guaranties. It usually works perfect, but there is always the possibility of incompatibilities.
The GPU memory and frequency is independent and irrelevant for this topic.
I have done everything I can think of. I have windows 7 64 bit. I have disabled/re-enabled sound cards, uninstalled/reinstalled drivers. I have checked all settings I possibly can think of. My head phones work GREAT and on startup I can hear the sound, but once in windows, no sounds through my speakers.
I installed win 7 x86 on a sony vaio vpceb36fg. Everything seems OK but the Fn keys. The combination of Fn+related keys work only for sound volume and screen lock button and not for others!
How to get all Fn keys worked please?
Is it needed to install any tool/utility?
Your laptop came with Windows 7 Home Premium 64 bit so I'm curious as to why you decided to install a 32 bit version.
Laptops, particularly Vaios, have specific functions assigned to keys. On yours you were previously able to surf the web and play DVDs without booting up into Windows. To regain all that you've lost will take quite a bit of work. The utilities you need will be on a Sony support site. However, sometimes things have to be installed in a particular order before they work. It took me a long time Googling, downloading utilities and experimenting to get everything working when I reinstalled the OS on my Vaio.
Before I say anything else, I am very new to building a computer. Ive never built one in my life. I am curious if the setup I have to far will work! I am trying to look for pretty cheap but good options for parts. So far I have a case, processor, and GPU in mind. I need ideas for the motherboard especially. I dont know how to tell if everything would work correctly, so if something would be incompatible, could you tell me?
So far I have
GPU: Nvidia GTX 760
CPU: Intel Core i7-3770k
Case: NZXT Phantom 240 Mid Tower
Hard-Drive: Seagate Barracuda 2TB HDD
Operating System: Windows 7 64 Bit
Would there be anything else I need? Also what is thermal compound and Heatsink? Are these required for my setup? Please tell me if there is anything wrong with this so far and what items I should use for the unfilled spaces! Thank you all so much!
I have a mystery on my hands. I received a Bluetooth speaker as a gift. The BT-4.0 adapter plugged into my computer (USB-2.0 port) detects it (as a "Bluetooth headset"), but when I try to select it as my output device (from the "Sound" Control Panel), Windows reports it as "Disconnected".
If I open "Devices and Printers" and right-click the "Bluetooth headset" icon, I get an alert that the device "Failed to initialize".
I've tried rebooting, tried a different BT adapter, updated my BT drivers off the makers' website, Device Manager shows everything is connected & working (including "Bluetooth Audio").
64bit Win7 Home. Inateck BT-4.0 usb adapter. Speaker is a "MicroBoom" BT v2.1:
PS: Eliminated the obvious. Speaker is fully charged and works just fine with my phone.
I recently bought several Dell Optiplex GX computers online for repair I usually do a thorough review of what I am getting but this was a a with VGA Help DVI-D on port computer monitor using a cheap deal on a big lot and a few things slipped by me For one it takes a special power cord that I can t find for less than and there were none Help using a VGA monitor with a DVI-D port on computer with the lot I ordered one to test them with for now but that is not my main problem but if anyone knows where I can get those DA- adapter power cords any cheaper please let me know where My main problem is that these are the small form factor cases so they have no card slots I am dependent upon the motherboard options only So here is my problem the only connector for a monitor on the back of the computer is for a DVI-D which would be great if I had monitors with those connections The only connections I have on my monitors are the VGA I bought some adapters from e-bay that were supposed to convert the DVI port to the VGA which the connector did but I have no screen using this adapter and I am thinking that I was cheated Can this even be done this way I have always just changed the video card but this computer has no way I can see to do that it is all in the motherboard Does anyone know what I can do here I put a fresh install of io xp pro on several of then since that is what they came with They only have pentium s with hyperthreading and single core processors and I didn t think windows would help any If anyone knows what I can do to use these VGA monitors please tell me because without being able to put a video card in it I am lost sincerely cableman nbsp
Your best bet for Global spares is www.pchub.com.
As to the DVI to D-Sub you did the right thing in buying an adapter. It should work period. Did you get the joblot from eBay? Was it sold as untested? Are the PCs even powering on? Maybe there are issues with memory/cpu/motherboard....
Yes you have to be very careful when upgrading the CPUs for this unit as they follow a narrower roadmap. Top line CPU would appear to be a Pentium D3.4Ghz which worked in a GX620 usff with bios revision A11.
I have two cheepo USB Bluetooth adapters for my Windows 7 PC. One is a tiny generic (thumbnail sized) micro adapter, the other a small "stick" made by Rocketfish.
Both adapters install and "claim" to detect my Bluetooth speaker (misidentifying it as a Bluetooth headset. I have no headset), but the speaker doesn't detect the PC (even when clicking the Discover button.) My cellphone sees my speaker, but it too DOESN'T see my PC.
Are all Bluetooth adapters the same and if my cheap adapters won't pair with anything, neither will an expensive one? Or might there be something else going on?
Do you see any yellow (!) in the device manager when either of the Bluetooth devices are installed?
I have a toshiba laptop right at a year of having it, it will not allow me to get internet connection even though it shows its getting wifi or set up through the router.. Is this a virus or other issue
Moving this topic to appropriate forum.
My computer is being running slow and is choppy also, I'm making sure the system is clean right now.
Problem solved, runned some anti-malaware programs and cleaned my computer.
I have a Windows 7 HP desktop system that is connected to the internet via an ethernet cable. The system says it is connected, and a ping confirms it is accessing the internet. BUT, all the browsers say the computer is not connected to the internet (tried Chrome, Firefox and IE). All of the Microsoft network adapters (6to4, ISATAP adapter, ISATAP adapter #2, Teredo Tunneling Adapter) shown under device manager cannot start (Code 10). the Realtek PCIe FE Family Controller is the only network adapter shown as working properly. What do I need to do to fix this? Let me know if there is any other information needed to help me.
Does your router see this computer on the network?
Are you on Private Network or Home Network?
Is the IP address showing 192.168.x.x or is it showing 169.xx.xx.xx?
NIC network card you can do a few things. You can can disable it and re-able it.
Open dos prompt
type: ipconfig /flushdns
type: ipconfig /release
type: ipconfig /renew
Give this a sec or two.
Now under services.msc (use the control panel and type services)
Select view local services
Scroll down for
DHCP Client (right click and stop it) wait then right click and start it
DNS Client (right click and stop it) wait then right click and start it
If none of the above work go into the device manager. under control panel type: device manager. click on device manager
-Realtek PCI-e this one uninstall the drivers (BUT DO NOT DELETE THEM)
Two options here.
One: Scan computer for new hardware changes
Two: Reboot the PC
Choose Two, because Windows will re-install the drivers and setup network card settings. for you. The Choosing One would do that same but you really want to flush out any prior issues that got you to this point.
Hey , I am not good at computers
plz help me to choose the best and cheap graphic card for my computer
the details of my computer are:
OS Name Microsoft Windows 7 Professional
Version 6.1.7601 Service Pack 1 Build 7601
Other OS Description Not Available
OS Manufacturer Microsoft Corporation
System Name PAWAN-PC
System Manufacturer WIPRO
System Model MS-7267
System Type X86-based PC
Processor Intel(R) Celeron(R) CPU 2.80GHz, 2792 Mhz, 1 Core(s), 1 Logical Processor(s)
BIOS Version/Date American Megatrends Inc. V17.21B6, 9/10/2007
SMBIOS Version 2.5
Windows Directory C:\Windows
System Directory C:\Windows\system32
Boot Device \Device\HarddiskVolume1
Locale United States
Hardware Abstraction Layer Version = "6.1.7601.17514"
User Name pawan-PC\pawan
Time Zone India Standard Time
Installed Physical Memory (RAM) 1.00 GB
Total Physical Memory 0.99 GB
Available Physical Memory 211 MB
Total Virtual Memory 1.99 GB
Available Virtual Memory 921 MB
Page File Space 1.00 GB
Page File C:\pagefile.sys
I don't think that GPU will make any difference in your 'rig'
Hey guys, my laptop asus stopped working with wifi connection and I was just reading some posts here about this same problem but didn't find how to fix it.
I was uninstalling some programs from my pc but I didn't uninstall programs named "something wireless". I just took off what I knew I could.
I also tried the option "solve problems" in the wireless pc symbol and the answer was to connect my laptop to an ethernet cable...that never happened. Just now.
Does anyone knows how I get back my wireless connection? Pleasee
Powercycle the modem and router. Here is a specific order if you have a separate modem and router.
1. Shut down all PC's.
2. Shut down the Modem and router.
3. Power on the modem only. Wait 2 minutes or so.
4. Power on the router. Wait 2 minutes or so.
If you have a modem/router combo, then you don't need step 4.
5. Boot up the PC and see if you can connect.
Hi all I have to the WLAN work as rather Router on from a WiFi LAN a a typical situation in my Internet and LAN setup My ISP provides me with a direct LAN cable that I need to connect either into my PC or into the WiFi Router WLAN port I also have a LAN that I need to connect to so I have installed a separate LAN card for the internal LAN purposes My two setups are below with their issues I hope someone can suggest a middle grounds to have a LAN and a WiFi too Scenario The ISP cable goes into the WLAN port of the Router Cables from the router goes into my PC network card and to other PCs for LAN purposes The PC cards are all configured to automatic IP LAN Internet WiFi is now available This works fine for a few days and then the internet stops working because there is a conflict of IP The ISP expects IPs like xxx and the one on the LAN Router for my PC is Scenario Router to work as a WiFi on the LAN rather from a WLAN The ISP cable goes into network card internet sharing is enabled Router to work as a WiFi on the LAN rather from a WLAN and automatic IP with the ISP s expected IP xxx Another cable goes from my PC s network card fixed IP into the regular LAN port of the same Router Without any issues over the months the Internet works the LAN works other PCs have fixed IPs too etc but no Wifi Can I have best of both the worlds in such a situation I can t install a rd network card for sure as the slot on the mother board is limited Please advise Thanks in advance Bhavbhuti nbsp
isp==>(wan)router-->PC card-1, et al (conflict 123.237,234.xxx v 192.168.1.100)
scenario-1 is a configuration or firmware condition
scenario-2 is a real security issue and the primary PC is basically acting as a DMZ server and is at risk.
Here's my setup:
isp==(wan)router-1--- PCs in the same room
+---(lan)router-2(with wifi) - - - wifi connections in the den
configuration to make this work with full file/print sharing:
disable DHCP in this router
setup all WiFi settings here
notice: router-2 wan slot is left empty to make this work
set LAN address of router one as you please (eg: 192.168.1.1 )
set an address reservation for router-2's MAC -> a fixed, constant IP address on that same subnet (eg 192.168.1.254)
set the DHCP range small (eg 2-32)
router-1 will control all auto-ip assignments for both routers.
Personally, I add another tweak;
reserve ip addresses for all of my devices into the low-end of the dhcp range (say 2-10) and
let 'guests' take addresses above 10
This gives the opportunity to allow file/print sharing to known systems (2-10) and disallow for the guests.
Setup totally within the routers allow my laptop to travel and not be effected by these choices.
When I am playing a video with any browser it is very choppy (sound and video).
Even Window sounds are choppy. It seems like if I move the mouse it gets worse.
Computer is very slow to open programs, even though the system idle process
is at 99% before starting another progam. This happens even when no browser is open and the
anti-virus software is disabled.
I don't know is this is a software or hardware issue.
Post this here:
See if they can help with this problem
I use an ADSL modem for accessing Internet in my home. I think my wifi password is stolen. I wanna change it but I have a computer only in my office and use the Internet in my home by my iPhone. Is there a way to change that password with my iPhone or should I surely use a computer to do that work, please?
Hello abbasi ,
You can use your iPhone to log in the router and change the wireless settings, however this isn't usually recommended. If something goes wrong when configuring the wireless settings and you are not able to connect to the router you'll need a device that can be connected via Ethernet cable to restore the access.
If this router is supplied by your ISP you can ask them if they have remote access to it to change the password.
Hope that helps.
I need a computer that can handle video editing, mainly Final Cut Pro and Adobe Suite. Right now I have a 5-year-old MacBook Pro that can't manage FCP let alone run any programs smoothly and quickly. I can't afford a MacPro, so I've been considering iMacs. What's my cheapest option that will get the job done? I've heard you can buy PCs and install Mac OS. Would that be my best option? (Having PC capabilities would be awesome, for light gaming). I want to save money but I don't want to buy anything that isn't equipped to handle video editing well (cause then I'm just wasting money). I want to stick with Mac OS, but I don't care about the design or whatever, so I'd happily get a PC and put Mac on it, but I don't know how I would go about doing that. So if you have any suggestions or advice, please let me know! Thanks!!
What is your budget (how much can you spend) for this new computer?
I have been thinking about buying a really good Gaming Computer, and now I have no idea which computer or specs to actually get. I want something cheap but don't mind expensive. I also heard that custom built computers are better than already engineered computers. I was checking out http://www.ibuypower.com/Store/Intel-B85-Configurator but like I said I don't know what specs to get for this computer. I want a computer that can support any game like any call of duty, minecraft, LoL, WoW, etc. and maybe posting videos on YouTube or others. Please help and thank you for your attention.
Please comment the specs
That is a good place to have a computer built as far as specs go there is no computer specs that have to be met, a good PSU is good in any machine, a reasonable mobo is needed in any machine. I prefer ASUS but they will be the highest if top of the line. if u are going to overclock make sure it is over clockable and make sure the processor is over
clockcable and yes they both have the ability, although the board will just put the # down. any video card will play games, but the newer ones should give u more frames, and last longer. as far as the processor AMD or Intel will be fine. and that site will e-mail u if the MOBO and processor will not work together.
Well I am accessing my remote router via and it works access work via phone, Remote PC doesnt via ok when I am using my Phone s Remote access ok via phone, doesnt work via PC browser chrome or IE on Samsung however when I am at computer at work I cant access my router I ran Tracert and I am getting up to hoops and th says quot Request timed out quot lt ms lt ms ms lt ms lt ms lt ms lt ms lt ms lt ms ms ms ms ms ms ms ms ms ms ms ms ms ms ms ms ms ms ms Remote access ok via phone, doesnt work via PC ms ms ms border ge - unitedair- chg pnap net ms ms ms core te - -bbnet chg pnap net ms ms ms ae - chi ip gtt net ms ms ms xe- - - chi ip gtt net ms ms ms c-eth- - - -pe ecermak il ibone comcast ms ms ms he- - - - -cr ecermak il ibone comcast ms ms ms ms ms ms te- - - - -sur mortongrove il chicago com net ms ms ms te- - -cdn mortongrove il chicago comcas t Request timed out Request timed out Request timed out Request timed out Request timed out Request timed out Request timed out Request timed out Request timed out Request timed out Request timed out Request timed out Trace complete Anyone would know why it works on the phone and doesnt really go through all the way to the end nbsp
Ok I have to ask first when you are using your phone is it always using mobile data or do you connect it at work via wifi? When reason that makes sense to me is at your work they maybe blocking the remote port. I guess it all depends on what you are using also. If you are just using standard RDP then they might be blocking port 3389. If you could give further information on how you are connecting remotely whether using software such as teamviewer or just standard RDP. Also how do you have your router configured. I can better understand witht is information thanks....
Printer Problems in Windows XP sp3
Dell Personal Printer all in one A940
After trying to speed up an older computer running Windows XP
I may have cut off the Print Spooler (or it was already off ?)
I went back to Services dialog box & selected Print Spooler
I clicked the "Start" link at left of service list & got a message tgat said
"could not start print spooler service on local computer error 1068 The dependency service or group failed to start."
Printer is still not working can anyone help?
On Win/7 the dependencies are
Remote Procedure Call (RPC)
DCOM Server Process Launcher
RPC Endpoint Mapper
Manually start each on and set to AUTOSTART as you go.
If one fails, then that is the root problem.
My 320 GB Seagate external hard drive is detected but not showing up in my computer. What should I do?
In cmd> diskpart> list volume it does not show up. (screenshot attached)
In Device Manager it gets detected. (screenshot attached)
In disk management it shows up as 'unallocated'. If I initialize it, will I lose all data on the drive? It had 4 partitions. (screenshot attached)
In My Computer also it does not show up. (screenshot attached)
Even BIOS recognizes it.
What to do? I don't want to lose any data on the drive. If I initialize it in device manager will I lose data?
I was installing window XP on my computer, usually I remove the external drive but this time I did not. The external drive was shown as 4 drives in partition manager during installation. But the installation failed. The next time I was installing windows again, the external drive was shown as 1 single unknown or unrecognized drive. I'm not sure if it was unknown or unrecognized. I'm sure I didn't format it. So what I need to do now? I don't want to lose any data.
Yes, if you initialize it you will 'lose' everything. You will want to try something like [email protected] Recovery or maybe Easeus Partition Recovery.
Seattle has at least 10 cell phone theft cases daily, authorities say.
Prosecutors say thieves using cell phone buy-back kiosks.
Police say to write down IMEI number before your phone is stolen.
Phones with IMEI numbers reported stolen are useless to thieves.
My question is what if it don't have an IMEI number but a MEID number? Are they one in the same?
Found my answer http://www.wikihow.com/Find-the-IMEI-or-MEID-Number-on-a-Mobile-Phone
I pair my Plantronics Calisto PLT Headset to my Desktop Computer (Windows 7 x64), and it showed that everything is OK, but when I tried to use it, it didn't work.
When I press icon of sound on the taskbar and I go to Playback or Recording there is there Bluetooth Hands-free Audio but is Disconnected, and I don't have any idea how to connect this and make to work.
Can someone help me to solve this problem? I will really appreciate any help.
I did everything like supposed to be. I attached few images to show my situation.
Yesterday I bought USB BT400 Adapter.
I started everything from beginning and there is exactly the same situation. Nothing changed. If you look to the picture, everything is pair and installed and when I ask them, they said that was something wrong with Windows configuration (not 100%).
Point is that they didn't have any clue what is wrong.
I didn't mention that before when I installed USB Bluetooth Adapter, and I pair my device in the Playback and Recording devices when I tried to connect it worked for very short time and after this somehow disconnected by itself.
I don't know if I explain well what's happened, but if you want to ask something to make clear, please don't hesitate.
I have a problem with my laptop.
Sometimes the space bar, n and enter key stops working. When this happens, I can usually hit the button a few times and the key finally registers. It happens randomly and quite often. But sometimes I can type for hours without it happening.
I have not spilled any liquid on my laptop and I haven't dropped it. The problem started randomly a few months ago.
Does anyone know what could be causing this?
The laptop is an Asus K55V. It is nearly 3 years old
Not sure if this might work that well, but give it a try! If it doesn't..go to a technician...its probably the best idea.
Shut down the laptop, removed battery and cable for a moment, press and hold the start button for 60 seconds... and replace the battery.. start the lap top.
Hope this helps!
I'm using a Huawei Mobile Broadband E303 and I've been having this problem for 6-7 days now Ples halp
It was working perfectly fine before but now the speed wont go past 60-70kbps.
My current operating system is windows 7 ( V 6.1.7601 )
I've tried using it on other laptops with windows 7/xp/vista as their operating systems still the same problem except for my brothers laptop which runs on windows 8. and dont tell me that this Thing wont work because its not compatible with my operating system, because I've been using it for over a year without an issue.
My ipconfig shows:
Mobile Broadband adapter Mobile Broadband Connection:
Connection-specific DNS Suffix . :
Link-local IPv6 Address . . . . . : fe80::7450:69bc:7a3e:fee8%57
IPv4 Address. . . . . . . . . . . : 172.22.155.137
Subnet Mask . . . . . . . . . . . : 255.255.255.252
Default Gateway . . . . . . . . . : 172.22.155.138
And when I try to do nslookup:
Default Server: google-public-dns-a.google.com
The default server shouldn't be that thing. please help. Nor the address
Edit: I've tried Uninstalling the Program which came with the USB.
I've tried calling my ISP, with no problems on their end.
Randomly, about 2-3 weeks ago my computer began to run slowly. If I'm just browsing the internet or using word documents and things like that it is fine and I cannot tell. The problem lies in things like playing games or running programs like itunes. I checked for all virus/malware, and there was nothing that I could see. I did a defrag and cleaned/cleared the registry and temp folder. Does this sound like it could be a hardware or driver problem? If its not a virus, could you give me a few other reason a computer would start doing this randomly.
Overheating? What are the computers specs?
Hi I'm not a tech-y person so I'm just hoping that someone can help me.
I recently bought a new laptop it's a Lenovo G40
Intel Core i5-4210U CPU @ 1.70GHz 2.40 GHz
64-bit Operating System
Windows 8.1 Single Language
I got home, downloaded and installed Firefox for me to use as my default browser. I got to use it for awhile (about 3 hrs) then I tried going on Facebook and it was taking too long to load. Then I tried it on my phone, it loaded faster than on my laptop. I tried searching (on both devices) random stuff on google (e.g. Miley Cyrus) and it took my laptop about 3 mins to load and my phone only took less than a minute to load. I did a speedtest on my laptop and I got 3.4mbps as a result (that's fast enough right?).
I really hope someone could help me with this because I'm currently student and I have a lot of requirements to do and I can't do that without a laptop and internet.
So, all 3 are on WiFi. Can you run a test with either of the laptops connected with an Ethernet cable and let us know the results? I suspect your wireless router has 802.11N, and that your phone supports it but your PCs only support 802.11G. 802.11N and G don't always play nicely together, and no 802.11G implementations is ever going to deliver 49Mbps of application layer throughput.
These are the specs I have so far,
MSI X99S Gaming 7 Motherboard
Corsair Vengeance LPX 16GB (4x4)
2x MSI GeForce GTX 970 Gaming 4GB SLI
Cosair Hydro Series H80i
Cosair HX1000i 80plus Platinum 1000W (For future maybe a third gtx970)
Coolermaster Cosmos 2 Ultra
Samsung EVO 250GB (OS)
2x Samsung EVO 1TB (Main Games)
2x Western Digital Black 3TB (Other older games and programs)
Windows 7 Pro 64x
Other various fans (going with a black and blue theme outside and red and white inside)
Plenty for max setting at that resolution?
A few months ago my computer started crashing when playing games. The screen would turn either black, white, (or once pink), the fan/fans would max out, and the audio would just change to a loud buzzing sound. This would continue until the laptop was turned off.
Around that time, one of my hard drives was failing. We thought, seeing as it fitted so well, that it was the problem. I've just had the hard drives replaced, and while it was running perfectly for a few days, it has now started to crash again, and far more frequently. Most of the time just after the desktop loads.
I'm currently running in safe mode, and that's perfectly fine. No crashing.
I've tried disabling my audio drivers, and rolling back my video card driver, but with no success. I'm assuming that as safe mode has no problems that it must relate to a driver, or, some software, but I have no real clue what I'm talking about.
My video card is the NVIDIA GeForce GTX 580M, if that's important. No idea what other information to include. Thanks for any help anyone can give me.
Go to C:\windows\minidump. Minidump files have a .dmp extension. If there are any .dmp files, select them all and right-click, sending the files to a compressed(zipped)folder. Upload this folder as file here
Hello guys..I have a same a problem..I cant play any of my mouse in my laptop..can u help me to fix it..thank you so much.
Moderator note: Moved from this thread: http://www.techspot.com/community/t...t-computer-is-not-frozen.183253/#post-1430301
You can't use any USB mice in your laptop? How many have you tried?
What the title says. I bought a TP-Link WDR4300 and installed it, and everything works perfectly on every device except for my laptop (Windows 8.1 Lenovo G480, running Windows Defender as AV). When connecting wirelessly, I get access to the router, but it shows "limited", and it doesn't even let me get into the setup page (192.168.0.1) and when I ping it, every packet is lost. Ethernet, meanwhile, works perfectly. I'd appreciate any suggestions on how to fix it.
I'd like to attach the ipconfig outputs but my command prompt is in spanish and some of the characters are missing in the .txt file, too. I don't know how to get the file in english.
@jobeard I saw one thread you solved in which you said to mention you so you could help. I'd really appreciate it. Thanks beforehand for any and all suggestions.
Hi, You will always have to use the ethernet (Cat 5) cable to get into your router's software, at 192.168.0.1, all routers are set up like that for security reasons.
It's done that way so that no one can change your settings, passwords etc using a wireless connection, you must use the Cat 5 cable to make setup & security changes.
Did you get any setup software with the TP Link router?
If you get good internet access using Windows 8.1 using the ethernet cable, it
might point to possible wireless driver issues.
It might be worth downloading the latest driver for your WDR4300 from the TP-link website;
I'm reading this (http://wps.pearsoned.com/ecs_kurose_compnetw_6/) networking book.
The exercise no 13 of chapter one says:
P13. (a) Suppose N packets arrive simultaneously to a link at which no packets are currently being transmitted or queued. Each packet is of length L and the link has transmission rate R. What is the average queuing delay for the N packets?
(b) Now suppose that N such packets arrive to the link every LN/R seconds. What is the average queuing delay of a packet?
I've obtained these for (a) and (b):
(a): (N-1)/2 L/R sec.
(b): For nth LN/R: [n(N-1)-2(n-1)]/2 L/R sec.
1- Are these answers correct?
2- Is here a correct place for posting such problems?
My my; Network theory. Not to dampen your efforts, but unless there's a switch, knob, or parameter that can alter the outcome, there's little practical use of this kind of information IMO.
As an example of a practical issue, the SACKOPTS paramater greatly improves TCP performance.
I'm really new to the tech/ computer world, and know next to nothing about graphics cards. I was wondering if someone could help me figure out what graphics card I can upgrade my computer to (if I can upgrade at all) I was wanting to buy the new Sims 4 game, but after having played a very slow and choppy Sims 3 for years on this computer, I'm ready to actually play a game smoothly without it freezing all the time.
Here's what computer I have:
Compaq Presario PC SR5601P
Processor: AMD Athlon X2 4400
Memory: 1 GB
Hard drive: 250 GB
Graphics: NVIDIA GeForce 6150 SE Graphics
Windows Vista SP 1
Sims 4 System Requirements & your PC system results
For Sims 4 according to the link above, your CPU GPU and memory is lacking for even the minimum system specs. We can recommend a GPU, but that's not all you need if you plan on playing Sims 4. And if you get a stronger GPU, chances are you will also need a stronger PSU. If 300W's is all you have for power, you are limited to sub $100 graphic cards. Which would be fine for Sims 4, but then you also have a CPU and memory that needs upgrading.
Have to choose a new work phone but I have a hard time deciding ... Friend's Galaxy S5 and 8200 mah battery seems awesome so Apple and Microsoft are not up to my mind. Since the new phone is supposed to live with me for like 2 years, so..what's the average life span of Samsung phone?
Anyone have opinions? Samsung Galaxy Note 4 or Galaxy S5?
A smartphone can last for numerous years as long as you don't abuse it. It isn't a matter of lifespan since most phone hardware gets dated after 2-4 years and you are going to want an upgrade. It will still work even after the cell service is ended.
My internet wont work, ive tried using both crome and IE but both browsers say that I am not connected to the internet despite the fact my computer says that I am connected to the internet. I know its not a network problem because my other devices are connecting fine. Also I tried connecting to the wifi at home and at school and it still does not work. My laptop is a HP ProBook 6390b and I am using windows 7. This problem started occurring after about 4 months disuse of my laptop which I think might be a factor as to why its not working. I have run windows updater and run a scan with my antivirus but still nothing helps. Thank you for any assistance in advance.
Have you kept up and installed all the Windows 7 updates and are there any yellow (!) in the device manager?
I got a hp 6371it
link --> (http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02054227&tmp_track_link=ot_faqs/top_issues/it_i...
I have this problem: I bought a kingston Dimm ValueRam 4GB DDR3 1333MHz Non-ECC CL9 (it is compatible with my mb according to hp website). I installed it on my pc and:
1) if I install just that ram it works fine
2) if I install that ram I bought and one ore both ram I had already installed in my pc it doens't work or it blocks on hp main screen or it appears the classic blue screen of hardware error and it never enter on windows (it asks for a system reinstallation)
what is the problem? should I do something else? I tried mounting rams in different slots, I tried everything
Sound as though the ram you bought is not compatible with the existing ram. Is the ram you bought the same specs as the old ram?
About a week ago, our cable internet connection went out. Before I had a chance to reboot the modem & router, my 11 year old decided to completely reset the router to factory settings! Ugh! This caused several issues: my home network is now gone, only a unsecured factory network is available. When I try to plug my laptop into the router via ethernet cord (in order to login to router and setup secure network) my computer will not recognize the router and won't connect to internet. I tried troubleshooting with my cable provider and they say it's in my computer (IP address will not reset) and he recommended I replace my network card. However, today when I brought my laptop to work, it will instantly recognize the wifi at work. So is it really my network card that is causing issues? Please help, I'm desperate and not tech too tech savvy!
Linksys wireless router
Charter cable modem
Hp pavillion dv6 laptop with Windows Vista OS
Did you figure this out?
Hi can any one help I cant hear any sound on my laptop its all turned up but when I conect it to my tv the volumes fine but soon as I disconnet from the tv the sound ont go.
Did you fix this?
I have been upgrading an old Compaq Presario SR5130NX.
I'm new to the computer scene, and decided to switch the PSU to 230V, just to see what would happen. It exploded. That's what happened. I installed a new PSU, and now, whenever I turn on the PC, there is an error message saying "CPU fan has failed" and the PC shuts down automatically before I can access the set up, or bios. My case is currently open however, and I can see that the fan is working so I think the motherboard got messed up, and I'm afraid this could have also damaged my graphics card and memory.
My motherboard is a m2n68-la (ivy) and here are the product specifications: http://h10025.www1.hp.com/ewfrf/wc/...&product=3436820&tmp_track_link=ot_search#N96
Can anyone tell me what's going on? Can this be fixed, or should I just get a new motherboard and start from scratch?
If I'm posting this in the wrong section, please point me in the right direction.
Unplug from wall socket.
reset bios by removing bios battery for few seconds. reinsert bios battery.
check if cpu fan is still attached to cpu fan header and is still intact.
check 20+4 main power connector
check 4-pin auxiliary power connector (can be 4+4, depending on motherboard)
(check the motherboard for any burnt marks, bloated capacitors.)
plug to wall socket and turn on.
if unable to power up computer, then maybe the motherboard is dead.
if the motherboard has any burnt marks or bloated capacitors, don't use it as it maybe dead.
if you are going to build a new budget build:
processor: intel Pentium g3258
cpu cooler: coolermaster hyper 212 evo (or 212x)
motherboard: h81, b85, h97, or z97
memory: 4gb ddr3-1600 single memory module (or 2x4gb)
gpu: NVidia gtx 750, amd r9 260
storage: 1tb hdd
psu: seasonic 500w+
OS: windows 8.1 64-bit or ubuntu
cpu cooler: coolermaster hyper212 evo (or 212x)
motherboard: asus/asrock z97
memory: 2x4gb ddr3-1600 (or 2x8gb)
gpu: NVidia gtx 760 or amd r9 270x (or higher)
storage: 256gb Samsung 840 evo ssd + 3tb Seagate hdd or 2tb wd black hdd
psu: seasonic 600W+ for single gpu usage
OS: windows 8.1 64-bit or ubuntu
Here again since I have the most weird problem ever which I have never seen nor heard of before. I recently upgraded the OS on a friends computer, from Vista to 7. However now I can't seem to get the onboard ethernet adapter to work, it can't be seen in device manager nor anywhere else. I have tried to reset the bios (by removing the cmos battery) and I have also checked that the network adapter is set to 'Enabled'. Also, when I connect the cable to the ethernet port no lights go on, it doesn't give any sort of hope what so ever. The cable is ok, the "modem" is ok, and everything else seems to be in order and yet it doesn't work.
Computer in question:
HP Pavilion 6530sc
Non-default GPU and added 1Gb RAM
Whenever you install a new OS, always take note of the model of core system hardware like GPU, chipset, and ethernet/wifi (there are a few others that aren't as important, but nice to have updated) since those are critical to your computers core functionality.
However, a quick google search of your model yielded me with your PC's system specs. Your PC contains a Realtek RTL8201N ethernet adapter. So far I am unable to find a driver from Realtek itself and the HP driver is not Realtek, but instead nVidia nForce.
So after a bit of searching, I came across this: it seems to me that you have an old chipset from nVidia. I am not completely sure, but I think you have an ION chipset. Try installing this ION chipset driver (64 bit) ==OR== this ION chipset driver (32 bit) and tell me if it works. It should include the necessary component drivers and if it works, it means you have an ION chipset like I suspected.
Here are the specifications for your PC BTW.
I've recently built a new computer for myself and has been running perfect for a few months. A couple days ago whilst gaming/browsing my monitor went into power safe mode and shortly after my computer shut off, I tried to start up again only to have the same problem occur , the only old parts were a graphics card and psu, I just got in a new gpu and installed it successfully. Same problem occurs. All fans are running properly including the heatsink , processor core temps are around 39 , everything seems to be running ok? Thoughts?
Check event viewer to see why it shut down.
I recently got a broken computer as payment for a data recovery project however as it turns out the computer Which computer to use? isn t entirely broken it actually works fine all I had to do was reset the bios and remove the GPU There s only one part that was broken and that was the GPU reason for that was overheating since the Clud D sticker on top of the GPU wasn t in place to it has been blocking the fan from spinning as it should Anyhow now I have ended up with a dilemma what computer should I use The Which computer to use? specs below is what I can put together with parts that I got and with the parts that I currently use and note that the only quot real quot difference is the CPU CPU Intel Core i - MOBO Asus P T SE HDD Gb Kingston SSD Gb Tb GPU XFX HD PSU W ChieftecClick to expand CPU AMD FX- OC - GHz depending on the temp inside MOBO Asus M A LE R HDD Gb Kingston SSD Gb Tb GPU XFX HD Which computer to use? PSU W ChieftecClick to expand Additional Question - Is it possible to use both Corsair tri-channle TR XG C RAM at the same time as my current Kingston RAM which isn t Which computer to use? tri-channel - How much can the i be overcloed nbsp
Having to choose between the two you have, I would stick with the Intel i7. Follow the guide provided in link and you could reach 4 GHz overclock, depending on if your motherboard can handle the overclocking.
I would not suggest overclocking too much if you are running stock cooling fan. It will create too much heat for the i7 to handle.
Hi, hope I've put enough specs in profile for you to help. I have a Compaq Presario 6735s I bought around 2008. CPU quite slow but graphics card not bad so made decision to upgrade. Looked up the laptop manual here to find compatible CPUs for motherboard, socket type etc. Went through 3 different (*****ic) buys before I found one that actually fitted.
Now with everything reassembled, screen will flash up once upon powering on, then nothing. All usual lights come on, even my wireless connects, makes usual start up noises, fan, dvd drive etc ....
Proceeded to take everything apart again, re-connected everything I tampered with. Even RAM, which I didn't have to remove before.
Still same reaction starting up.
Really frustrated with myself as thought this would be the right one. Could honestly cry, haha.
I read the tutorial on here called 'No POST' to no avail either. I really hope it can come back from this.
One last thing I can think of (before pulling new CPU out) is upgrading BIOS to support new CPU but with no screen I am stuck.
Can someone please give me a little direction?
Did you re-install the old CPU to see if the laptop booted normally again? Upgrading CPU's on laptop motherboards can be a very difficult thing to do. What is supposed to be compatible in reality is not
I have heard of somethings like computer manufacturer and motherborad manufacurer. For example some time ago, when I had problem with my desktop PC, some asked me what's your computer manufacturer and motherborad manufacurer?
what's the difference between these two please?
Computer manufacturer Is most of the time is Dell, Hp,Compaq, Ausu are a few.
Motherboard manufacturer . Asus, Gigbyte, Asrock. Msi, Are a few. This is what they are referring to. When they ask you those Questions .
Hello to all I m going to install Win XP properly port The ps/2 of doesn't work the motherboard on my computer I had win but had some problem with installing the HP printer on it and so I decide to install XP because that printer seems to be installed properly The ps/2 port of the motherboard doesn't work properly on XP Now When I put the XP CD on the CD driver it says press a ker to boot from CD and I press the Enter key now the keyboard works after that within installation time when that I should press Enter to install XP this time the keyboard doesn t work My guess is that the ps port of the case has problem it s old and somewhat has been broad Now what is the solution in your point of The ps/2 port of the motherboard doesn't work properly view please My system manufacturer is quot ECS quot and the system model is quot pl-A quot PS there are two black amp white screens which mobo shows First screen shows the amount of RAM the model of CPU the IDEs and info like these which is common for first screen But the here when I want to enter to BIOS by pressing Del key it seems that keyboard doesn t work so it doesn t go to bios The second black amp white screen shows fewer info and it says quot Press shift-F to configure and when I press these two I can to enter to an environment that seems to not be the BIOS the keyboard here WORKS It has very few options And apparently doesn t have options of manipulating the keyboard settings nbsp
I have joined a computer (PC1) to a domain control server (2008), and user able to login using their domain user account - although recently I have found out that even though the computer (PC1) do not connect to a server, user still able to access using their domain account.
Is there a way for me to restrict domain account user from accessing the computer (PC1) if they are disconnected from server?
Hope my explanation make sense to you guyz.
Thank in advance
Lots to be considered. Joining a domain is intended to give the company admin configuration control of all the company users.
This is normal, expected and even proper for the company to do this.
restrict domain account userClick to expand...
hmm; only the company admin should be able to do this and almost always it is done using some scripts, NOT by loggin into your PC. So - - who is accessing your PC remotely, the admin - - how do you know this occurs?
PCs joined to a domain usually get a replacement for PC Login - - the network form and that creates a link to the domain controller.
Could someone look over what I have and see if there is anything wrong with the list. oo and I have a SSD hard drive already and can someone recommend a CD drive and ram?
thanks in advance
Qty.Product DescriptionSavingsTotal Price
ASUS GeForce GTX 770 GTX770-DC2OC-2GD5 Video Card
Return Policy: VGA Replacement Only Return Policy
NVIDIA Gift - Watch Dogs
Return Policy: Standard Return Policy
Intel Core i7-4770 3.4GHz LGA 1150 Desktop Processor
Return Policy: CPU Replacement Only Return Policy
CORSAIR CSM Series CS750M 750W Power Supply
Return Policy: Standard Return Policy
ASUS SABERTOOTH Z97 MARK1 ATX Intel Motherboard
Return Policy: Limited Replacement Only Return Policy
NZXT Phantom 410 Series CA-PH410-B1 Black Computer Case With Side Panel Window
Return Policy: Standard Return Policy
Possibly, no one has commented because 1. people want to hear what you are aiming for - a gaming PC? CAD/CAM? Web-surfing? etc., and 2. you sure piled on a list of pricey items without any argument for why you need such pricey items when you can do nearly as well by sliding down the price range a lot, and 3. you have not said what size the SSD is - it might not be large enough to comfortably support operating system plus a few multi-player games.
A first-time build does not have to be the ultimate Win experience. Largely, builders work for a trade-off between cost and function. For your first build, you may want to build something that is straightforward, not too expensive, and can be upgraded in the future.
If money is no object, just get the most expensive of everything and enjoy. Just make sure everything is compatible.
I am not trying to be rude. Just kinda surprised by the price tags, and the lack of responses thus far.
Hi, so today I unplugged my computer while it was still running by accident. Now it wont start at all, no lights, no fans, nothing. I am concerned that it may be a problem with my power supply (maybe fried it or something). And no its not a problem with the cord (I tried a different one), its not a problem with the power switch (the one that you switch to either circle or line) because I tried it both ways. However recently my computers power button stopped working so my brother hooked up an old keyboard to my computer so to start it I will press a key on that keyboard and it will start up my computer, so I have to keyboards one to start the computer up and one to type. So in summary im not really sure what the problem is but im 90% sure it has something to do with either my "power keyboard" of my Power Supply so yeah. Any help will be apreciated
Try and get a psu off a friend who might have a extra one. Go from there. This way you might be able to narrow it down. It really hard to say what happen .
Tried just about everything but I still can't seem to get my external hard drive to show up in my disk management or computer. It say it's installed and ready to use but I don't see it.. only in the device manager and in devices and printers I can see it.. but nowhere else.. I'm working with windows 7 upgraded from windows xp but has be downgraded which was originally windows vista I think.. A friend gave me a computer and I had it upgraded.. can any one help me get my computer and external hard drive straight. Thanks.
Check this thread out: http://goo.gl/rxkBN
The Seagate Momentus 5400.6 hard drive I'm using is from my old laptop it has 4 disks.
After I put it in the (IT-CEO IT-700) enclosure, and connect it to my new laptop it does not show up in 'My Cumputer' and 'Disk Management', but displays in the 'device and printer' section of control pannel.
I also can't eject the hard drive, even when I'm not doing anything to it, the (IT-CEO IT-700) enclusre's blue signal light just keeps flashing for a while then goes off for a sec, then resume flashing again.
My laptop also keeps trying to install the hard drive.
I tried reinstall the hard drive's driver, but that did not solve the problem.
Have you tried using different drive enclosure other than the IT-CEO IT-700?
Sorry for that long title. Anyway, I was watching some YouTube videos when my wi-fi suddenly stopped worked. With this, I don't mean that I'm not catching signal from my router. I mean that my computer isn't receiving signal from any network. I don't know anyway to fix this, it never happened. I also won't buy a new computer. I got this on Christmas and I think that 7 months isn't that old. Also, the only tutorial I found doesn't applies to my computer (It was for a mac ). I have no idea of how to fix this and if you know, PLEASE HELP ME!!!!!! (If you are curious of how I am posting this, it works with Ethernet connection)
It's an ASUS computer with Windows 8.
Give the following a try and see if it helps:
Go to network sharing center - change adapter setting - click on wifi and then Diagnose this connection.
If this does not help, please let us know and we can suggest something else to try.
So currently I have a modem in the living room Cisco EPC and then it goes all the way to my room to a Cisco WRTG V router Yesterday out of the blue it stopped working This is because I previously had routers in the network Asus and Cisco anyways I decided to disconnect my asus and use only the cisco but the router just won t work I reseted it to it s fabric settings But when I log into it it says the router s IP adress is And hands out IP adresses to my pc such as I have no idea what to do Microsoft Windows Version Copyright c Microsoft Corporation All rights reserved C Users MiKi gt ipconfig all Windows IP Configuration Host Name MiKi-PC Primary Dns Suffix Node Type Hybrid IP Routing Enabled No WINS Proxy Enabled No DNS Suffix Search Router work won't properly List sbb rs Ethernet adapter Local Area Connection Connection-specific DNS Suffix sbb rs Description Intel R V Gigabit Network Connectio n Physical Address - B- - Router won't work properly -B - E DHCP Enabled Yes Autoconfiguration Enabled Yes Link-local Router won't work properly IPv Address fe d d ca Preferred IPv Address Preferred Subnet Mask Lease Obtained Wednesday June AM Lease Expires Wednesday June AM Default Gateway DHCP Server DHCPv IAID DHCPv Client DUID - - - - -B -D -EB- - B- - -B - E DNS Servers NetBIOS over Tcpip Enabled Tunnel adapter isatap sbb rs Media State Media disconnected Connection-specific DNS Suffix sbb rs Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter Teredo Tunneling Pseudo-Interface Connection-specific DNS Suffix Description Teredo Tunneling Pseudo-Interface Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes IPv Address d abd e a Pref erred Link-local IPv Address fe e a Preferred Default Gateway NetBIOS over Tcpip Disabled Tunnel adapter TO Adapter Connection-specific DNS Suffix sbb rs Description Microsoft to Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes IPv Address ebd bbaa ebd bbaa Preferred Default Gateway c c DNS Servers NetBIOS over Tcpip Disabled C Users MiKi gt This is my ipconfig with the modem and this is with my router Microsoft Windows Version Copyright c Microsoft Corporation All rights reserved C Users MiKi gt ipconfig all Windows IP Configuration Host Name MiKi-PC Primary Dns Suffix Node Type Hybrid IP Routing Enabled No WINS Proxy Enabled No Ethernet adapter Local Area Connection Connection-specific DNS Suffix Description Intel R V Gigabit Network Connectio n Physical Address - B- - -B - E DHCP Enabled Yes Autoconfiguration Enabled Yes Link-local IPv Address fe d d ca Preferred IPv Address Preferred Subnet Mask Lease Obtained Wednesday June AM Lease Expires Thursday June AM Default Gateway DHCP Server DHCPv IAID DHCPv Client DUID - - - - -B -D -EB- - B- - -B - E DNS Servers NetBIOS over Tcpip Enabled Tunnel adapter Teredo Tunneling Pseudo-Interface Media State Media disconnected Connection-specific DNS Suffix Description Teredo Tunneling Pseudo-Interface Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter isatap BE - - BA - E- B A F Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes C Users MiKi gt nbsp
Have you tried pressing the reset button on the router? (long press)
I have seen this 'reset button' on several router brands/models like tp-link (tl-wr941n, tl-wr740n old version, tl-wr740n newer version), buffalo draft-N routers, cdrking routers (made in china router brand sold in the Philippines).
if the reset process I described is the same as what you typed in your first post, try to manually change the router ip address.
my wimax modem ip address = 192.168.1.1
so for the tp-link wr-740 router, I use ip address - 192.168.0.1
login to your router and change it. if there's any save button, click it. my router prompts me to reboot the router. after a few seconds, the preferred ip address I have chosen is good for use.
(I have hidden my MAC address)
I bought a new mobile computer a few weeks ago,
the model is: HP 250 Business i3-3110M.
Then at home, I charged the battery and checked that everything is working properly.
In practice I'm going to use it only in a few months from now.
What is the best way to keep it until then?
Should I empty the battery, disconnect it? and etc.
I'd suggest making sure the battery is fully charged & then just unplug the AC & let it sit till you're ready to use it.
Although you didn't say what OS it is, I'd suggest you have somebody here help you remove the crapware that it don't need & install security programs
I gotta Seagate USB 2.0 500 GB Expansion drive. Its been working just fine on my computer up until a couple days ago. For some reason the latest windows 7 update must have messed up the formatting of it, now its not being recognized on my laptop at all. Shows up as a local disk...very frustrating. I've tried almost everything I could think of. I've tried assigning a partition letter in disk management, uninstalling the software, trying it on different computers, system restore...nothing. I don't wanna result in having to reformat it and lose what I got. Could somebody please help me???
You may try to scan and check your hard drive for possible errors using Seagate's Seatools for Windows.