Windows Support Forum

A question With IE6 + WMP 9 Series

Q: A question With IE6 + WMP 9 Series

Ok. Here is my problem guys.

Before I ran the CCleaner program, (which just cleans out the system a bit) I used to be able to go to websites and when I clicked a video link, it would play it right in the same window. Now, after I ran the CCleaner program, when I go to the same website, the video link will open a whole new window and play. Now, its using windows media player 9 to view these clips. So I know that working fine. I just want it back to normal, so I can view the clip on the same page.

Relevancy 100%
Preferred Solution: A question With IE6 + WMP 9 Series

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: A question With IE6 + WMP 9 Series

Chek your setting in your Internet Options.

Open IE and click on Tool/Properties.
Click on Advanced tab and scroll down to Multimedia section.
Look to see which boxes are checked regarding the setting you want for viewing within web pages.

Drop a line back if it does not fix your problem.

http://www.techsupportforum.com/forums/f56/a-question-with-ie6-wmp-9-series-18770.html
Relevancy 49.02%

Aren't some of the Intel 845 graphics processors based on the AGP platform?
 

A:845 Series Question

Yes. But the AGP slot only runs at 4x. That wont be an issue with an older card though.
 

http://www.techspot.com/community/topics/845-series-question.58254/
Relevancy 48.59%

What I would like to know is when OC'ing what is the highest safe voltage and the highest safe temps.
AMD ain't much help with this no shock
I just upgraded less then a month ago to the new FX-6100 6 core and love it it's fast. I had the OC to 4.41GHz stable when the voltage was set to 1.55V and the max temps under load were 68C to 69C max.
Thanks for any help you can give me.
 

https://forums.techguy.org/threads/wondering-a-question-about-the-new-fx-series-cpus.1051886/
Relevancy 48.59%

hi i have a 4870 in my pc and im hopin to get a 5850 or something soon but idk what i should do with my old 4870 like can istill use it for anything? maybe for another monitor? or would 2 different monitors on 2 different cards be not possible? anyways i bought that card for like 250 and have loved it ever since and dont wanna sell it. just what can i do with it? (planning to buy a new montior fo dual display soon too)

A:So the 5000 series are here... i have a question

Sell it while it still has some value to help offset the cost of the new card.

And no you don't need two cards to run two monitors, you would be hard pressed to find a card made in the last few years that can't run dual monitors.

http://www.vistax64.com/graphic-cards/252125-so-5000-series-here-i-have-question.html
Relevancy 48.16%

Hello im just new to these forums and ive been looking for a laptop for quite some time now.

my current laptop is the qosmio x770-116 with i5 and gtx 560m, ive been using this laptop for about 4 years now and it still delivers great fun but im noticing it can no longer holdup in current games such as gta5 where the cpu is constandly at full steam..

anyways I was looking for a new qosmio version but the latest is haswell+gtx770m which is old hardware for these days.

Is there anyone present on these forums that could give a estimation about when the new version will arrive to west-europe?
Then there is still to hope that the design is further improved with better cooling and the exaust left, the x70 cooling doesnt seem sufficient unless you live in siberia.

with kind regards,

Brian

A:Question about the future of Qosmio X series

Is there anyone present on these forums that could give a estimation about when the new version will arrive to west-europe?



New version?

As far as I know the latest Qosmio model which was released by Toshiba was Qosmio X70-B (in Europe) and X75-B (in USA)

For example the Qosmio X70-B-10T was quipped with an Intel Core i7-4720HQ quad-core CPU from the Haswell generation, AMD Radeon R9 M265X GPU, 17.3-inch full HD display, and DTS stereo speakers from Harman / Kardon. Qosmio X70-B-10T comes with a 1TB SSHD with 8GB of flash memory.

Furthermore the AMD Endure power management technology switches automatically between the dedicated GPU and the integrated Intel HD Graphics and this helps to increase the battery working time.

So from my personal opinion this is still very good gaming notebook… but let’s see what will happen end of 2015 and in 2016…

https://forum.toshiba.eu/showthread.php?83130-Question-about-the-future-of-Qosmio-X-series
Relevancy 48.16%

What is best if I have 3 240GB Intel SSD 520

Raid 5 - Gives me ~480GB with some redundancy if an hd fails, costing some writing overhead

Raid 0 - Gives ~720 GB but no redudancy

Raid 0 + Hot Spare - Is there such a card?

My motherboard has 2 Sata 6gb ports, so I will need a new Raid Controller to go into Raid 5 mode, can anyone provide any hints to a good inexpensive 6gb raid controller to support 3 SSD ?

Thanks

A:Intel SSD 520 Series, RAID Question

RAID 5 also introduces a write penalty for parity calculations.

RAID 0 with a hot spare...no such thing.

SSD's are too expensive to use in a RAID array. Just run 3 stand alone drives and enjoy your 720GB of SSD storage space.

http://www.sevenforums.com/hardware-devices/236851-intel-ssd-520-series-raid-question.html
Relevancy 48.16%

DOes anyone know if any manufacture is planning on releasing the video card in agp version?
 

https://forums.techguy.org/threads/ati-radeon-x1800-series-question.414535/
Relevancy 47.73%

Ok i am wondering with this motherboard "P4B533 (Intel 845E) Series " does it take RAMBUS RAM specifically or can SDRAM or DDR be put in. Here are the specs from ASUS but i am not to illeterate to understand some stuff.

http://usa.asus.com/mb/socket478/p4b533/overview.htm

I am wondering because a friend ordered that motherboard and i want to make sure he knew what he was getting into first especially if it requires RAMBUS RAM...

Well any opinions are helpful and or if it takes regualr SDRAM or DDR or just striclly RAMBUS..

Thanks
Dennis
 

Relevancy 47.73%

Is it possible to change the sound card on my sony vaio VGN-N130G laptop to one that is XP proffesional compatible? and is it easy enough for me to do it?

Also how much will this sound card be? Im looking for the cheapest one that will last a very long time, and im not bothered about the quality, just as long as im able to hear sound im happy

cheers
 

Relevancy 46.87%

I recently bought the 1gb version thats silver and all of the websites i did a search on it for said you could get it to work with windows 98 se if you downloaded a driver for it. the only driver i saw on the sandisk website doesnt seem to do anything. were those sites wrong that you can use the player with win 98 se or did i just download the wrong file?
 

https://forums.techguy.org/threads/question-about-the-sandisk-sansa-m200-series-mp3-player.472416/
Relevancy 46.01%

This keeps coming up when I use the Intel(R) Driver Update Utility 2.5

"A customized computer manufacturer driver is installed on your computer.
The Intel Driver Update Utility is not able to update the driver. Installing a generic Intel driver
instead of the customized computer manufacturer driver may cause technical issues.
Contact your computer manufacturer for the latest driver for your computer."

Should I change from "Customized computer manufacturer driver" to the latest one from here (a "generic Intel driver) - https://downloadcenter.intel.com/

I am looking for the option which gives better fps

Intel HD Graphics Info :
http://prntscr.com/b6ujgb
System info:
http://prntscr.com/b6ukbs

https://forum.toshiba.eu/showthread.php?91989-Question-about-Intel-HD-Graphics-Card-driver-update-on-Satelllite-C-series
Relevancy 44.29%

I have a set of HP Z Workstations with E - -V Xeon Cpu's SSD boot drives and varying sizes of memory from - GB Mghz DDR ECC We use Windows Enterprise for these machines with Hyper-V enabled We get regular driver failures from the sets of USB controllers on the machines Mainly and issue for the KB amp Mouse that can only be resolved with a full power down not restart and a power up This happens at least once every - days per machine I had gone through the HP support but Chipset fail Family causes USB Series/C200 Series Enhanced Hyper-V Controller driver Intel(R) to Host they have advised this isn't an issue on their side and I had agreed all along I was just hoping to get some traction by notifying them Anyway after a lengthy trouble shooting session we found that once Hyper-V was enabled the fault arose As it was an Intel chip they I asked them They advised that on Windows the drivers are supplied via windows update and that it was not their issue So how can I get this resolved Not through Hyper-V causes Intel(R) Series/C200 Series Chipset Family USB Enhanced Host Controller driver to fail HP or Intel surely through MS Maybe not Disabling Hyper-V is not desired as I the teams with these PC's are developers and require local visualization Also we have templates ready for Hyper-V I don't really want to remove Hyper-V and use Virtual box or VMWare workstation but I am at wits end with the fault and lack Hyper-V causes Intel(R) Series/C200 Series Chipset Family USB Enhanced Host Controller driver to fail of help from the vendors Please help

A:Hyper-V causes Intel(R) Series/C200 Series Chipset Family USB Enhanced Host Controller driver to fail

I have found a work around for this fault with the USB failure - ENSURE YOU POWER  THE MACHINE OFF - DO NOT RESTART.
Its almost like the restart doesn't initialise the device correct, thus causing a failure. 

https://social.technet.microsoft.com/Forums/en-US/974e8470-9fd5-47b4-9bdf-699f6e3c33d6/hyperv-causes-intelr-seriesc200-series-chipset-family-usb-enhanced-host-controller-driver-to?forum=w8itprohardware
Relevancy 43.86%

I know it s been posted a Needed Price + 7-Series Advice v. in 8-Series: Performance s load of times but I figured I d go ahead and get something straightforward- all the other posts have been in jungle English and haven t included the proviso I m looking for Anyways my situation is that I bought my X GT from Newegg around Christmastime as a present to my ainsel ownself for those not familiar I ve been getting kind of disappointed in it Price v. Performance in 7-Series + 8-Series: Advice Needed recently It underperforms and often crashes on STALKER Shadow of Chernobyl and some more modern games akin to it It also runs hot as Hades I m in the market for a new card I d like to go DX but the late-production DX s series seem to outperform a lot of the more affordable DX offerings series especially at higher resolutions Price v. Performance in 7-Series + 8-Series: Advice Needed due to the -to- bit difference I could splurge and go for an I suppose but it would be a hit to the wallet and I d have to postpone cough quot Aruban Getaway quot So I don t want to pass up on the new line of DX -only Games for Windows Age of Conan Crysis etc that have been hyped to all hell just because I stuck with price and performance instead of currency and novelty I need some help deciding Then again I could always wait until DX becomes the vogue and buy a cheaper but better card then nbsp

A:Price v. Performance in 7-Series + 8-Series: Advice Needed

Keep what you got and see what's comming next. I have a 8600GT as a stopgap until something better comes out. There has been talk of a Nvidia 256bit card to fill the gap between the 8600's and 8800's. I can't fit a 8800 in my case, if I could I would just get the 8800GTS 320mb now. If I were you, wait for the game to upgrade instead of upgrading and waiting for the game. Your X1900GT is no slouch either.
 

http://www.techspot.com/community/topics/price-v-performance-in-7-series-8-series-advice-needed.81319/
Relevancy 43.86%

All nbsp With the new year we start a fresh discussion for members to share their order and fulfillment experiences nbsp We are retiring the nbsp thread nbsp nbsp nbsp Anyone having an active discussion there can find it here nbsp The - tread nbsp can be found here nbsp nbsp nbsp nbsp Here are some common points of frequent discussion nbsp How to get a system fast nbsp Buy an in-stock standard configuration from Lenovo or a Lenovo Partner in your area Customized systems take longer Avoid Credit Holds - ensure that BOTH your bill to and ship to addresses are listed with your CC bank before ordering Lenovo will not bill your card until order ships - an authorization Tablet Series X - Shipping edi... 2015 Thread series charge hold to check for available X series Tablet Series Shipping Thread - 2015 edi... balance may show up when order is first placed Estimated ship dates are based on default lead time and can vary from what was displayed on website In the US and Canada Lenovo utilizes UPS for new product shipments Orders may ship before the Estimated Ship Date Orders may enter through Alaska and pass through Louisville KY before traveling on to final address Cancellation requests may take up to days to process Requests to change configuration or other aspects of the order may require the order to be rebooked Lenovo does not accept payment via international credit cards except AMEX We hope you enjoy your new ThinkPad system when it arrives

https://forums.lenovo.com/t5/ThinkPad-X-Series-Tablet-and/X-series-Tablet-Series-Shipping-Thread-2015-edition/td-p/1855963
Relevancy 43%

I have a Pavilion G6 2000 series, I bought this laptop 2nd hand it has a generic cd/dvd bezel that does not stay on. I have found a G6 1000 bezels but I need to know if it will fit before I purchase a replacement that may or may not fit. Help????

http://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/Is-a-G6-1000-series-compatible-with-a-g6-2000-series/td-p/5669964
Relevancy 41.71%

hey there

I have a question, what is a better video card to get?
6800 series or the x800 series?

the graphics card that i have in right now just isnt cutting it for me, NVIDIA GeForce FX 5700 I mainly play HL2, CSS and Doom3. I was woundering what card is gonna give me better fps for those games. i have the specs of my comp here (vv) and i wanted to kno what card(s) would run great with the things that i have.

the specs of my comp are:
Video card:NVIDIA GeForce FX 5700
mobo:GA-8IPE1000 (2.0)
processor4 3.0 Ghz (OC'd to 3.4 Ghz at the moment)
PSU: 420 thermaltake ATX 12V
Cooling: prestock (gonna change very soon)
RAM: Genaric PC 3200 mismatched
HD: Maxtor Dimond MAX+9 160GIG

What do u suggest i should get?
 

Relevancy 41.71%

Hey,
I want to invest in a SDD to replace my dying westgate harddrive. I've set my mind on Corsair but I want to know the difference between the eXtreme series and the Performance series (http://www.corsair.com/products/ssd_home.aspx). According to the website, X SDDs reads a little bit faster, but the P series writes a little bit faster. The only other thing is that the P series is around £100 cheaper!

So is the X series worth the extra £100?

Thanks.
 

https://forums.techguy.org/threads/corsair-sdd-difference-between-the-x-series-and-the-p-series.905956/
Relevancy 39.13%

Hi I have some Toshiba Tecra M series but for some reason the laptop no longer works with a battery attached and just get flashing light on the laptop It works fine with power but won't swatch on at all with a fully charge battery I have tried many and it's not the battery I have taken the laptop apart but can t find anything that is wrong So it must be the battery motherboard M10 Toshiba same Tecra the series series A10 asTecra motherboard? and or charge circuit resisters gone on the M Anyway Toshiba Tecra A10 series motherboard the same asTecra M10 series motherboard? I was looking at a motherboard replacement On looking about it appears that Toshiba released a M and a A series They both look about the same to me with the same Toshiba Tecra A10 series motherboard the same asTecra M10 series motherboard? fittings but to be sure can anyone tell me if a A motherboard is the same as the M motherboard Maybe someone who works with these day in day out hopefully will know Just don t want to buy and A if it s not compatible with M case and fittings

https://forum.toshiba.eu/showthread.php?90946-Toshiba-Tecra-A10-series-motherboard-the-same-asTecra-M10-series-motherboard
Relevancy 38.27%

I'm hoping to get some info from anyone that has some good stats on these cards I've been outa town for days and wasn't near my freind MY PC over the release of Series... ATI 200 vs GTX 4000 Series the New GTX cards so sadly I didn't get to see all the info and the Benchmarks for it Other than Kingpin's Crazy Vantage Score Other than that I just got home and I'm GTX 200 Series vs ATI 4000 Series... wanting to get the Scoop on these cards I've been reading a little tonight tho Also I'm hoping for some info about the new ATI and they are looking VERY nice and GTX 200 Series vs ATI 4000 Series... looks like ATI might have finally made something that can actually compete with Nvidia this time around Nvidia's had the Enthusiasts Market for a good Year and a half or so IMO but I've read only a little about them from what I've seen they look good but if anyone has some info or links to Info about them then please share I kno most the ATI benchmarks that are out now are not completely trustworth cuz the cards aren't officially here yet But please post some links and info if you can Thanks Also What should I do Buy a cheap or Cheaper used GTS and SLI them or sell mine and SLI GT G 's after price drop becuase of the new series or should I try and hold out and get a or should I get a ATI looks good and now I'm in a Fickle as what I should do I knew what I needed to do until I read about there new release comin now I'm shattered and need to wait for more info I take in a lot before I buy things little OCD I think I'd call it haha or a lot actually ok this is long enough Thanks please post info links

A:GTX 200 Series vs ATI 4000 Series...

If you want 8800GT's, the prices have dropped to about $150 average on newegg which is great considering i got mine for $250. Personally, I'm against SLI, but if you're for it and would have to make a purchase now, go with 2 8800GTS g92 as they're averaging about <$200 (MSI's 8800GTS is on newegg for $177) and they provide some performance over the 8800GT. Since the 9800GTX is basically the same performance as the 8800GTS but more expensive, then forget that.

If you can wait a while to make a purchase, I've heard that the newer 9800GTX+ will have higher stock clocks that will deliver better performance with its newer drivers too, and this card comes out in mid-July. It's supposed to be priced around $230 and it's chip is built on 55nm process. This card sounds attractive, but we'll have to wait for solid reviews of the card first.

ATI... I don't like them, so I'm sorry but I can't tell you anything about them.

http://www.vistax64.com/graphic-cards/162428-gtx-200-series-vs-ati-4000-series.html
Relevancy 38.27%

I'm getting really pissed off for the newer games. Some of them requires an Direct X 10 video cards to run it properly. Do you guys think 7900 SLI can run newer games smoothly such as Lost Planet? On my computer I test my system requirements and it failed for recommendations. It says that it requires Dx 10 cards to play smoothly.
 

A:7 series SLI versus 8 series (No SLI

I'm sure you will loose some of the gee wiz graphics not using a DX10 card but so far most game makers have been making games that use either DX9 or DX10. As far as lost planet is concerned here is whats posted on their official forums as supported vid cards.


http://www.capcom.com/BBS/showthread.php?t=15043

The following is a list of video cards that our R&D labs have tested in conjunction with NVIDIA and ATI, and have been confirmed to work.
NVIDIA (DirectX 9)
GeForce 6600
GeForce 7x00 series
GeForce 8x00 series

NVIDIA (DirectX 10, requires Windows Vista)
GeForce 8x00 series

Windows XP 32-bit Driver: ForceWare 162.18 beta (July 5th)
Windows Vista 32-bit Driver: ForceWare 162.22 (July 11th, 2007)
Windows Vista 64-bit Driver: ForceWare 162.22 (July 11th, 2007)

ATI (DirectX 9)
Radeon 1650
Radeon 1800
Radeon 1950

ATI (DirectX 10, requires Windows Vista)
None currently.

For R600 (Radeon HD2900, etc.) cards there is a hot fix from ATI:Click to expand...

the 7900 is showing in that list so it looks like it should work
 

https://forums.techguy.org/threads/7-series-sli-versus-8-series-no-sli.602219/
Relevancy 38.27%

Any Idea or ETA for Lenovo Ideapad Y Series W/ New Nvidia Gtx 10 Series ( 1060 / 1070 / 1080 ) ? or New Intel i7 7th Gen Processors??

https://forums.lenovo.com/t5/Lenovo-P-Y-and-Z-series/ETA-for-Ideapad-Y-Series-Gtx-10-Series-or-i7-7th-Gen/td-p/3421948
Relevancy 37.41%

will the 9 series make the $220 8800gts drop to something like $100 or will it still be $200?
 

A:Will the 9 series cards make the 8 series cards cheaper?

eventually, and then the 10 series will do the same to the 9 series, rinse and repeat. basically as long as its one of the fastest cards the gts will be expensive, when it becomes obsolete (relatively) its price will drop.

from the question i assume you are looking to upgrade, if you want to only spend $100 then i'd say your best bet is an OCed 7600 GT, lotsa bang for your buck, i can run FEAR with pretty high settings with just one of them.
but really, what are you looking for?
 

http://www.techspot.com/community/topics/will-the-9-series-cards-make-the-8-series-cards-cheaper.97664/
Relevancy 34.83%

I have a Netgear DG834GT wireless router which works fine with my PCs which have G series network adapters. But with my laptop with an N series network adapter the signal disconnected every 20 seconds then reconnected; this was only a problem using it at home – everywhere else it connected well. I solved this by using a G series PCMCIA when at home. So far so good.

Now my wife has been given a work laptop which has the same problem. She can’t use a PCMCIA because the laptop has been set to stop her installing the software. So… should we get an N series router? Is there any reason it wouldn’t let us both work PCMCIA-free? And if we should go ahead, any advice on what specs I should get or avoid?
 

Relevancy 34.83%

Is the nVidia 4200 ti series older than the nVidia FX series?
I am pretty sure the nVidia 4200 ti series is older than the nVidia FX series, but am not certain. Thanks in advance for any responses.
 

Relevancy 33.97%

So Dell made a really terrible 15 Series power 15 Can a board power board? a with Inspiron Dell Dell I Series Inspiron 5000 replace 7000 decision nbsp They have a transparent strip in the power button for an LED light to indicate if the power is on nbsp A power indicator is a given in any laptop no matter how cheap it is nbsp However Dell in all of it Can I replace a Dell Inspiron 15 5000 Series power board with a Dell Inspiron 15 7000 Series power board? s genius decided to not include an LED bulb on laptops up to the Inspiron Series despite leaving a transparent slot for it nbsp Seriously what happened to this brand nbsp Do children make these laptops now I want to fix this as my laptop is no longer returnable and a power indicator is absolutely necessary nbsp So the only thing I can think of is replacing it with one from the Series somehow Can I replace a Dell Inspiron 15 5000 Series power board with a Dell Inspiron 15 7000 Series power board? with some help probably This is a Dell Inspiron nbsp I also have an Inspiron nbsp Not sure which exact model I should get the part for Are they compatible Is there an easier way Like how Fn H turns on the hard drive indicator Thanks

A:Can I replace a Dell Inspiron 15 5000 Series power board with a Dell Inspiron 15 7000 Series power board?

The systems use different case and mainboard designs -- and may even be made by different companies.  The answer in all likelihood is no.
I don't think Apple has produced a Macbook with a power indicator -- the PC vendors are playing follow Apple.

http://en.community.dell.com/support-forums/laptop/f/3518/t/19981673
Relevancy 30.96%

hi people my miss has only gone and brought a eee pc series asus with out even telling me she fort she was getting a bargin for second hand wot a fool she is ive got it in front of me now and they installed windows xp on b they sold her it ive done a driver scan and theres updates that need to done series eee pc i havent eee pc series got a clue if its a clone copy or anything i was thinking eee pc series would it be best if i just did a clean installation of windows xp boot from usb witch i havent got a clue how to do or shall i just let it update its self PLEASE HELP she brought this for my year old daughter for Christmas aswell ive told her to get the money back but she wont THANKS IN ADVANCE GUYS and another thing is i have no usb eee pc series cd drive to attach to it to boot windows from it all boots up fine its just all these update what need doing nbsp

A:eee pc series

If it currently has Windows XP SP2 installed, you need to install the SP3 upgrade before you do a custom scan at Windows Update/Microsoft Update.

A custom scan will probably display over 100 post-SP3 high priority updates.

------------------------------------------------------------
 

https://forums.techguy.org/threads/eee-pc-series.1077315/
Relevancy 30.96%

My HP PSC 700 Series All-in-one printer shows "HP printer disconnected". I have uninstalled and re-installed software, but it doesn't help. Does anyone know if there is a FIX for this problem?
 

A:hp psc 700 Series All-In-One

That so called software, Isit packaged with the printer?
If not, maybe u have the wrong drivers installed or the drivers aren't up-to-date?

Hope that Helps~

 

https://forums.techguy.org/threads/hp-psc-700-series-all-in-one.564524/
Relevancy 30.96%

Hey guys,

Hope you're all well, been a while since I was posting. However hope you can help me here.

I recently purchased a new ATI R9 200 series. However when outputting through HDMI the speakers make a 'clicking' sound. It's not rhythmic or in time with anything on the screen. I have the latest drivers installed.

Anyone have any ideas?

Thanks,

M

A:ATI R9 200 Series

Try adjusting volume settings. I had a similar thing with my R9 285

http://www.eightforums.com/graphic-cards/55883-ati-r9-200-series.html
Relevancy 30.96%

I know.......another question about which gfx card...blah blah blah.....
Sorry guys, but I just have to ask...
I have my eye on a 'Gainward GeForce 4 PowerPack Ultra 750 128mb 8x xp Golden Sample TI-4800SE' which I can get reasonably cheap £88 (UK)
Is this a good choice (am currently using a GF3 Ti200 64MB) or should I look to a mid range GF FX 5 series, or even a Radeon in the same sort of price range.........trying to get the best for as little as possible, shortage of cash...
I like to play UT2003/C&C General/Mohaa + Spearhead and a few others.
Using XP Pro-Abit KR7A-512MB DDR.
I would be very grateful for your thoughts/opinions...........even if you just say "use Google !!!" etc.......................
 

Relevancy 30.96%

I've had my P50 for a while now, and I keep coming back to the Lenovo website from time to time, looking at various accessories that I think I'd like to pick up.  However, Lenovo still doesn't list the P-Series in their drop-down menues when trying to tell them which machine you have. Are we supposed to just tell them we have W-Series, and hope we're not asking for a Docking Station, that won't be compatible between the P and W series systems? Does anyone else find it odd, that Lenovo is "hiding" things about the P-Series laptops? Thanks for the input!

https://forums.lenovo.com/t5/ThinkPad-P-and-W-Series-Mobile/P-Series-vs-W-Series/td-p/3457153
Relevancy 30.96%

I GOt a think pad I series of ebay for because it was good for parts may be fixable i want to start rebuilding laptops its IBM model - CPU pentium MMX Speed unknown Ram Unknown suspected switched for a mb ram chip i had not quite sure if its in the right place Hard Drive UNknown dont pad series. I think care at the moment my goal is to get it to boot a linux live boot cd screen think pad I series. Size inch Optical drive CD rom possibly RW power adapter None used one i had laying around Those are from ebay listing except for things in brackets But to the problem at hand i thought ill try and put in mb ram throw in a linux live boot cd that only needs mb but when clicking power button i see nothing on screen just black my first thought because i could hear stuff was maybe the screen is dissconected but im not sure tell me if theres anything i need or if i need to open up and look around nbsp

A:think pad I series.

a quick look at the rams the 2 original were 32mb and 64mb but does anyone know what to doo?
 

https://forums.techguy.org/threads/think-pad-i-series.565858/
Relevancy 30.96%

Hey everyone. I currently have a GTX 580 and I want to upgrade that. I was going to get a GTX 770 but I'm now considering waiting for the GTX 800 series. Is it worth waiting for the 800's and when do you think it will be released?
 

A:GTX 800 series?

Well supposedly it's coming next year, but since crystal balls don't exist who knows exactly when, maybe in Q1 maybe not, maybe way longer,or if they'll be delayed even further, or how good they'll really be, or if they'll have bugs, or how much they'll cost. If anyone really knows at this point they are not likely allowed to disclose details beyond what I'm sure you've searched on Google otherwise they'd lose their job; and even what may be known now may change as changes and delays happen all the time.

In the end, it's up to you, if you need a new or better card now, buy now, if you want to wait there will always be another generation or series in the works, if the wait is confirmed to be short then sometimes waiting a bit is not a big deal, when the wait is longer waiting may not make sense.
 

https://forums.techguy.org/threads/gtx-800-series.1112115/
Relevancy 30.96%

Hi,

The CD-ROM of my Mainboard can't be read by windows 7.
What can i do?

My mainboard is ASUS P45 and the CD-ROM is P5Q Series

A:P5Q Series

You could go to the motherboard web site and download whatever you need. What exactly are you needing that Windows 7 can't read?

http://www.sevenforums.com/hardware-devices/32726-p5q-series.html
Relevancy 30.96%

Hope someone can offer some insight. I see where many, if not all the brands, Asus, MSI, etc. have guys asking for vBIOS updates in various forums to solve problems with display. What is the general incompatibility issue? Any light that can be shed is appreciated
 

A:AMD R Series GPU's

EClyde said:





Hope someone can offer some insight. I see where many, if not all the brands, Asus, MSI, etc. have guys asking for vBIOS updates in various forums to solve problems with display. What is the general incompatibility issue? Any light that can be shed is appreciatedClick to expand...

It depends on what you are referring to, there is not real issues with the R series GPU's in terms of display output. Most of the associated problems people are having involve a few things:

Some of the 4k monitors (The AOC for instance) use a very odd way to refresh which caused the display to flicker on the R9 series GPU's which was resolved in a recent patch.

Some high refresh displays using DP

and some others

However I would not worry, most of the problems if any are fixed via patches and catalyst revisions. If the manufacturer has to update something like the this its normally involves something like with their own software or certain things in environments not working together properly. I would not worry, I have done nothing to my PowerColor R9 290X trio and they all work great.
 

http://www.techspot.com/community/topics/amd-r-series-gpus.203984/
Relevancy 30.53%

2 days ago, my computer was running nominal and there was no problem until i downloaded TAP 32 and SecurityKiss. I have a bad habit of force shutting down computer by the power switch. When I rebotted, I had a BSOD. So That was that i chkdsk /p and fixboot. When I Reboot, i get the windows defender error, the rpc error and another error. Up to today these are the problems i faced:

-Software errors
-Taskbar missing or if its visible it doest show the running programs
-Audio Doesnt Work
-Error 711 that deals with internet connection
-Error 1048
-I cannot get connected to some servers like i used to do
-System Restore cannot start

I want to fix this as quick as possible because i have very much important documents to process in 2 days time. Thanks In Advance.

Dell Insirpon 1501 (June 30, 2007)
os: Windows XP SP3
Processor: AMD Turion
Graphics Card: ATI Raedon
HDD: 160GB
RAM: 256KB

A:Series Of Errors

Hello and welcome to TSF.

We want all our members to perform the steps outlined in the link given below, before posting for assistance. There's a sticky at the top of this forum, and a
Quote:




Having problems with spyware and pop-ups? First Steps




link at the top of each page.

Please follow our pre-posting process outlined here:

http://www.techsupportforum.com/f50/...lp-305963.html

After running through all the steps, you shall have a proper set of logs. Please post them in a new topic, as this one shall be closed.

If you have trouble with one of the steps, simply move on to the next one, and make note of it in your reply.

Please note that the Virus/Trojan/Spyware Help forum is extremely busy, and it may take a while to receive a reply.

http://www.techsupportforum.com/forums/f100/series-of-errors-505513.html
Relevancy 30.53%

Hi I'm not entirely sure what the root of the problem is here so excuse me if I post this in the wrong section I recently built myself a rig with the help of pcmech com guys Specs are windows home premium -bit intel i - cpu diamond Asus p p d mobo corsair w psu x gb corsair ddr ram intel gb ssd WD black gb hdd The series of problems is explained in detail in this thread problems start at post Cliff's notes on the bugs problems that lead me to where I am now - wasn't sure when to switch as suggested my config from sata to ahci and did so in the bios during the first reboot of the windows install From what I was told I should have done it before the install of the OS - after installing the OS the PC wouldn't get past the 'loading windows' screen until problems rig with of new Series I detached the secondary drive and formatted it after a proper boot-up - installed several programs firefox games etc - pc crashed during assassin's creed showing a BSoD error that was too quick for me to read take a photo Series of problems with new rig of On reboot it would give me the option Series of problems with new rig of starting windows normally would only crash reboot or repairing windows which would give me this BSoD Uploaded with ImageShack us - for whatever reason one time the system repair seemed to work giving me this error report on boot-up Quote Problem signature Problem Event Name BlueScreen OS Version Locale ID Additional information about the problem BCCode b BCP BCP BCP BCP OS Version Service Pack Product Files that help describe the problem C Windows Minidump - - dmp C Users Taylor AppData Local Temp WER- - sysdata xml Read our privacy statement online http go microsoft com fwlink link amp clcid x If the online privacy statement is not available please read our privacy statement offline C Windows system en-US erofflps txt - I was then told it could be a memory module problem and to test them with memtest For a good reboots after that I tried running memtest from a CD at boot and it would run the first 'test bar' up to in a matter of seconds then crash and reboot again If I would try to run my PC normally it would seem to boot up fine get past the welcome screen then would simply show a black screen with my mouse cursor which was moveable Opening task manager didn't work clicking didn't work etc - I tried putting the ram in different combos of ram slots just to see if it would change anything it wouldn't load properly after a bunch of tries until I got it into what I think was the same config I originally had - Now the PC often boots to a screen saying I should repair windows start it normally and starting normally never works I repaired was brought to my desktop which gave me errors about improper shut-downs etc and my ATI driver and Catalyst Control Centre were crashing constantly so I had to reinstall them Everything seemed fine last night but this morning I got another BSoD crash that was too quick to see and had to repair again As you can probably tell I'm a pretty big noob just trying to provide as much information as possible Anything else needed just let me know Any and all help very much appreciated really want to get my rig on it's feet again Thanks for reading

A:Series of problems with new rig

Hi and welcome to TSF 0x1a error code is related to memory management which could indicate a ram problem,the next 0x6b Bug Check 0x6B: PROCESS1_INITIALIZATION_FAILED
The PROCESS1_INITIALIZATION_FAILED bug check has a value of 0x0000006B. This bug check indicates that the initialization of the Microsoft Windows operating system failed.

Parameters
The following parameters appear on the blue screen.

Parameter Description
1 The NT status code that caused the failure
2 Reserved
3 Reserved
4 Reserved


Cause
Any part of the disk subsystem can cause the PROCESS1_INITIALIZATION_FAILED bug check, including bad disks, bad or incorrect cables, mixing different ATA-type devices on the same chain, or drives that are not available becuase of hardware regeneration.

This bug check can also be caused by a missing file from the boot partition or by a driver file that a user accidentally disabled in the Drivers tab.
If you can get to your desktop please try to follow the instructions here http://www.techsupportforum.com/f217...ns-452654.html and attach to your next post

http://www.techsupportforum.com/forums/f299/series-of-problems-with-new-rig-479202.html
Relevancy 30.53%

I get a system beep lotsa times when i boot up But after some power off and power on again and again it starts and the 420 Series MSI Geforce MX 4 graphics card works great MSI has also included a MSI LIVE Update utility that i MSI Geforce 4 MX 420 Series used and guess what it found a new bios version for my VGA Bios driver and it flashes it ONLINE and asks me to restart and when i go to the LIVE update again it lists the same update again so it havent been installed arghh and msi dont MSI Geforce 4 MX 420 Series provide with info on how to do this manually either Also i have thought of it could be my chipsets drivers but how do i MSI Geforce 4 MX 420 Series know what kind of chipset i got You can pick from AMD nope INTEL nope and the VIA Chipsets drivers i have a MSI Motherboard with a Intel P Processor thats about i know so which one is da right one Try and help me if you can hehe nbsp

A:MSI Geforce 4 MX 420 Series

Johnny,

I don't have any direct answers, but I would like to suggest that you run dxdiag.exe thru 'start'>'run' (just type dxdiag.exe in the box) & also download "Fresh Diagnose" from www.freshdevices.com for a program that will give you LOTS of info about your system & the components installed. :grinthumb

Once you determine what you have: go to the mfgs. websites & check for patches, fixes & updates for the specific programs/components you have.

HTH, (hope this helps)
 

http://www.techspot.com/community/topics/msi-geforce-4-mx-420-series.1802/
Relevancy 30.53%

hi i have a hp 11o desktop pccan someone ples tell me how to boot from a memstick ples

http://h30434.www3.hp.com/t5/Desktop-Software-and-How-To-Questions/hp-110-series-desktop/td-p/5729229
Relevancy 30.53%

I just got a new CPU, it's an AMD FX 4-core unit. I tried upgrading my motherboard's BIOS (my MB is a GA 880GM-USB3) to the two most recent BIOS, and it just makes my computer not even boot up with the new CPU in it. Even when I try putting in my old CPU, it won't boot up sometimes, so I have to keep swapping out processors until it boots up. Please help!
 

A:Why won't my new AMD-FX (series) CPU work?

Dont have a Fx series myself, but as far as I know they should work fine in an am3 motherboard. being backwards compatable (am3 +)

Clear your cmos after installing the new cpu, Reset your bios to optimal/auto, And double check your motherboard supports your cpu.

If that wont work I would RMA it if possible.

Hope this helps
 

http://www.techspot.com/community/topics/why-wont-my-new-amd-fx-series-cpu-work.182737/
Relevancy 30.53%

Rumor has it that XP cannot print to Laserjet 4 by HP. Is this true?
 

A:XP with Laserjet 4 series

looks like they kinda work.

from HP's support site.

http://www.hp.com/cposupport/printers/support_doc/bpl11035.html
 

https://forums.techguy.org/threads/xp-with-laserjet-4-series.105908/
Relevancy 30.53%

Hiya,
I have downloaded a whole series of something, and converted them ready to burn, each episode has several files in it. How do I burn the whole series of episodes onto one disc? I just cant seem to do it, have tried clicking and draggng the individual episodes into one file and burning that, it doesnt work, (am prob bein really thick, sorry) have tried with Nero and NTI ( I prefer NTI), what am I doing wrong please?
Emz xx

A:Series Burn To Dvd

Found a guide that will walk you through.http://webpages.charter.net/bacitup/TheGui...VD%20Shrink.pdf

http://www.bleepingcomputer.com/forums/t/113754/series-burn-to-dvd/
Relevancy 30.53%

Right was just looking up some graphics cards for a customer and im wonering how is the 9 series thats supposed to run all games on high settings a lot cheaper than the 8800GTS/GTX/Ultra.?

thanks
 

A:9 series gfx cards.?

Yeah, it is cheaper but it is not better than the 8800 GT/GTS//GTX/Ultra. Price and perfomance wise, it is a great buy but if you're a serious gamer, why not buy an nVidia 8800 GT. I think that it is more powerful and offers more value for money. The ATi Radeon HD 3870 is also worth checking out.
 

https://forums.techguy.org/threads/9-series-gfx-cards.691492/
Relevancy 30.53%

I really hate to ask this, but what is the difference between these cards?
I'm looking for a replacement to a 9100 (8500LE I beleive) and want to stay under $150 (or so). I don't need the fastest of the 9600 series, just the best bang for the buck.
I see that there is a 9600SE, 9600, 9600Pro and a 9600XT (I think that is the price order) starting from around $70 up to about $200 (big price spread for the same number.
128MB for memory is ok and it has to have a DVI out along with a VGA out.
Without spending a day or two looking through all the tests any input or would a slightly older 9500 or 9700 be within what I'm looking for?

When I got my 9100 I was considering a 9500, but price stopped that choice. I don't want to sopund cheap, but I have a hard time justfying much over $150 for a video card!
 

A:9600 series; which one?

Stay away from the 9600SE. It is a severly crippled card. The memory bus has like half the bandwidth of any of the other cards you listed which is very important. Any of the other cards are good but I think the XT is supposed to be the best performance wise.
 

http://www.techspot.com/community/topics/9600-series-which-one.10923/
Relevancy 30.53%

I have two D-Link DIR- XTreme-N Gigabit Wireless Routers Pretend for my explanation that there is no wireless activity because that s not where the problem is My cable modem is downstairs connected to the first Router I ll call it quot Router A quot Router A is connected to a few systems and the router upstairs quot Router B quot Router B is connected to a few systems No systems upstairs can connect to the intenet I believe because of a communication error between the two routers Internet works fine downstairs So to summarize Router A can find Two series in Routers and access the internet but Router B Two Routers in series connecting through Router A cannot I thought that the upstairs router would be able to access through another router the same as any other connection but it can t for some reason I want to find out how to run these two routers in series so that I can have mulitple connections in each end of the house Can anyone give me some insight into how to set this up nbsp

A:Two Routers in series

Each of your routers need to be setup individually, and not through each other.
Once setup, plug the one router into the other. You should have no problems.
But your system would be happier with a switch or even a hub.
Are Router A and B the same brand? When each is used alone, do you get the same readings? Do you have VPN? or other security that could be blocking the second router out?
 

http://www.techspot.com/community/topics/two-routers-in-series.109683/
Relevancy 30.53%

Hello,  I own an HP ENVY All-In-One 23-q128  I received notification telling me that Intel WLAN Driver For Microsoft Windows 10 was available. The process was going fine until the actual installation started. I waited about an hour or two for it to complete, but it didn't. I started a new installation and went out for like 4 hours, came home, and it still hadn't installed. Am I doing something wrong?  Thank you.

http://h30434.www3.hp.com/t5/Notebook-Operating-System-and-Recovery/all-in-one-series-23-q128/td-p/5747794
Relevancy 30.53%

Hello there,
I am thinking about upgrading my current system. I will possibly get the GPU in a about a month or so, and I will buy the CPU and the motherboard and the Cooler possibly during Christmas. Are the FX series gonna be out by Christmas or should I go with the Phenom II x6 1100T BE?

I will be using the:
GA-990FXA-UD3 motherboard
Noctua NH-U9B SE2 CPU cooler

Thanks
 

A:Should I wait for the AMD FX Series?

The FX cpus should be out around september i would think so i would wait if i were you.
 

http://www.techspot.com/community/topics/should-i-wait-for-the-amd-fx-series.168547/
Relevancy 30.53%

Hi,
I'm trying to connect a Hp Jornada 540 to my desktop pc using an external ir device, but for some reason the handheld won't recognise the pc and vice versa. I know both devices do detect each other because the ir light flashes as though it is trying to connect but no joy! Both ir devices work as they have been tested with a mobile phone.
Any help will be appreciated
Thanks
 

https://forums.techguy.org/threads/hp-jornada-540-series.53570/
Relevancy 30.53%

I HAVE A HP PAVILION G SERIES AND MY WEBCAM STOPPED WORKING AFTER THE WINDOWS 10 UPGRADE. WHAT DO I DO?

https://social.technet.microsoft.com/Forums/en-US/33e6533a-66ea-4aba-b23e-e06067671b82/hp-pavilion-g-series?forum=w7itprohardware
Relevancy 30.53%

I know the older Cisco RV series and Cisco branded Linksys stuff had a crap reputation but how are the newer offerings Specifically the RV or RV Looking for router for a very small business - clients a small NAS Printer and maybe APs the now? series How Cisco RV is I would be the on-site IT guy and the boss much prefers to be paying me to work on the cars and not the IT environment so reliability is the greatest concern Might make use of the VPN one day but even that is unlikely Security concerns aren t too large our database contains names addresses phone numbers e-mail only no CC or SS s are stored only item that might be of unique How is the Cisco RV series now? value in a breach is the How is the Cisco RV series now? relationship of a VIN to Customer name address but I honestly don t know how sought out that sort of information would be when dealing with double triple digit production volumes the current owners tend to already be known second question how decent worthwhile is CIsco s Web Filtering on these it carries a premium is it worthwhile at that price point or basically worthless nbsp

https://hardforum.com/threads/how-is-the-cisco-rv-series-now.1916549/
Relevancy 30.53%

Hello,

I'm waiting on the next nVidia series of cards, (GTX 380?) as my 8800GTX is still ok for the minute.

Does anyone know when the next release is? I'm guessing around July?...

Just intrigued, because I want to make a monster PC in the summer!

Cheers guys,

Alex.
 

A:Next nVidia series? (GTX 380?)

The earliest news on nVidia usually shows up here:

http://www.tomshardware.com/reviews/Components,1/Graphics-Cards,4/
 

http://www.techspot.com/community/topics/next-nvidia-series-gtx-380.122677/
Relevancy 30.53%

I am having a problem with this printer.
The program works well except when i wont to print from the web it will only print two thirds of the page [from left to right] I reistalled it several times.if i go to IE -file-print preview most pages will print 2/3 of the pagein color others will print full page background all in white rearanged text.
Is it the program,setting is it me or is it garbage Tks
 

A:ph 1500 all in one series-help

check your ink levels or maybe your IE is your headache. Try to reinstall your IE.
 

https://forums.techguy.org/threads/ph-1500-all-in-one-series-help.479085/
Relevancy 30.53%

It takes 6 minutes to boot my PC (Dell Dimension 4600 series, Windows XP) after I installed above printer. After windows logo appeared a cursor starts blink on the blank screen and stays there about six minutes. But If I removed the USB cable that connect the printer this does not happened. help.
 

A:HP 7300 Series All in one

Chandare said:

It takes 6 minutes to boot my PC (Dell Dimension 4600 series, Windows XP) after I installed above printer. After windows logo appeared a cursor starts blink on the blank screen and stays there about six minutes. But If I removed the USB cable that connect the printer this does not happened. help.Click to expand...

Hi,

My name is Todd and I work at Dell's corporate headquarters. My team works with customers via blogs and forums. I saw your post and wanted to see if I could help.

Have you tried any other USB devices in that port to see if it happens with any other devices and isn't specific to the HP printer?

You may also want to go into your system setup (F2 during startup) and check the boot settings for the system. That system may be incorrectly trying to boot from a USB device and until it isn't able to it "hangs".

Let me know if other devices have the same problem or if you've been able to resolve the problem.

Thank you,

Todd

Customer Advocate
Dell, Inc

http://direct2dell.com/one2one/archive/2006/11/19/3648.aspx
 

https://forums.techguy.org/threads/hp-7300-series-all-in-one.578799/
Relevancy 30.53%

So about 3months ago my laptop broke so i wonder what if i tripy investing on upgrading my hp 3400 pro (desktop) than repairing my laptop.... So i was wondering... Can i insert a video card on my hp desktop? I dont know if its integrated or not but plsss i really need help and im really a noob

http://h30434.www3.hp.com/t5/Desktop-Hardware-and-Upgrade-Questions/Hp-pro-3400-series-mt/td-p/5597304
Relevancy 30.53%

Can't get my scanner to work...reinstalled, checked config. - all okay. Says.."cannot detect". It's plugged in...worked last week. It's a 6200 series scanner not a 600 series. I need to learn how to proof...Thanks for any ideas ya'll may have...The exact error message I'm getting is - SORRY, SCANNER COULD NOT BE INITIALIZED. [SCANNER NOT FOUND]

[This message has been edited by JennyP (edited 09-29-2000).]

[This message has been edited by JennyP (edited 09-29-2000).]
 

A:HP ScanJet 600 series

I'm assuming that it does have power and that the scanner is on correct?
First disconnect the scanner and reconnect to ensure proper connection. To wit, a visual inspect is not good enough...
Also, when you reinstalled did you do a complete uninstall first? If not do that. Else, you are really just adding a new layer of paint over the old cracking layer, eh?

Don't know much about your series...I'll go look, but is it USB or no? Anyway, keep us posted...
 

https://forums.techguy.org/threads/hp-scanjet-600-series.33915/
Relevancy 30.53%

Hello newbie here, my hard drive has 'locked' so it says , the hard drive came preloaded with windows 7 home, my question is,if I install a new hard drive and use my Lenovo recovery disc will I be able to install Windows 7, sorry if I seem to be a nummie but this is all new to me as I am a 'silver surfer'. Thanks for any help.
 

https://forums.techguy.org/threads/lenovo-c-200-series.1097741/
Relevancy 30.53%

Hi Friends,
More than a week ago i have not been able to use my HP 600B series Desktop with serial number-TRF2310LFZ,Product number-B5G17A\BH5 and system BIOS-CO2_712.ROM v7.12.It displays error message-"No boot disk found or disk failed" on a dark screen.

Please how may I resolve this?

Regards.
 

A:HP 600B series

sounds like the HD failed. You should probably hit the HP website for that machine and get a hard drive diagnostic test......but it sounds like that one is cooked.
 

https://forums.techguy.org/threads/hp-600b-series.1138566/
Relevancy 30.53%

Dear HP community: Hello, and a pleasant day. I am having trouble determining what series is my HP Pavilion G6. Viewing the BIOS, my Product number is: A1Z40EA#ABZ. And using this Product number this website give me the model:  HP Pavilion g6-1267sl Notebook PC I wonder what sereis this model belongs to, is it 1000 series? 1200? The reason for this is because I want to purcahse certain parts in this laptop (the lid, and the palm-rest) Please advise.   Warm regards, Mark

http://h30434.www3.hp.com/t5/Business-Notebooks/What-series-is-my-HP-Pavilion-G6/td-p/5752877
Relevancy 30.53%

I bought an I Series 1171-91u 8 years ago.  I tripped over the cord while I was charging my battery and busted to power input off the motherboard.  I got a new motherboard from Impact Computers and although it is a 1300i, I am unable to determine which one it is.  I tried to use auto detect from Lenovo.com Support, but it would not detect my system. How do I get that number?  How can I find out which one I have so I can update my BIOS, I am having some problems and I can't get any good support from the supplier.  Thanks in advance.Samain 

A:How to tell I Series Mobo

Hi Samain, Welcome to the forum!  Sorry for such a late reply, but there should be a label somewhere on the systemboard, generally near the ram slot that will have a FRU number on it.




T61,T42(x2)T41,T40(x2),R40,T30(x2),T23(x3),T21,T20,X20,A31,A21M,600/E/X(multiples of each),770X,i1400(x2),760XL,760ED(x2 w/base),380XD,755CD,750P,360P,365X,560X,701C/CS,730T,PS/Note

https://forums.lenovo.com/t5/ThinkPad-T61-and-prior-T-series/How-to-tell-I-Series-Mobo/td-p/40209
Relevancy 30.53%

How can you tell how much GHz a system has when you are taking a look at specs of an advertised system? I can't quite make up that part when I look at the numbers that accompany the i series processors. now I udnerstand all i7s are quad(are they?) but some i5s are quad and some are not... how do you get this too? Anyone care to explain all this?

A:The Intel i series

This should help. Intel web site with specifications.> Buy Boxed Processor

It is a listing of PC CPU's. You need the model and that is it. Such as i7-2600 or i3-2120.
Click the one you want to see the specs on or check mark the "compare" box to see more than one at a time.

http://www.sevenforums.com/hardware-devices/196085-intel-i-series.html
Relevancy 30.53%

Hello I am new to Tech Support Guy and hope someone can help. Sometimes when downloading using uTorrent my download speed disappears completely. Why is this and what can I do about it? Thanks.
 

A:downloading TV series

as you are new and recently signed up - you should have read the rules and agreed to them
you would have seen we are unable to help with utorrents

closing post

http://www.techguy.org/rules.html
P2P and File Sharing - We do not support P2P file sharing applications or web sites where the aim or much of the content is illegally shared copyrighted music, videos, or other files. This includes torrents, Kazaa, LimeWire, RapidShare, Pirate Bay, and the like. Any threads requesting help for such will be closed. Obviously, this does not include legitimate sites like YouTube, Flickr, Vimeo, Metacafe, etc, that have a strong content policing policy. If you're interested in the topic of P2P, you are free to discuss it on our site, but information on how to use these services will not be provided.Click to expand...
 

https://forums.techguy.org/threads/downloading-tv-series.1119375/
Relevancy 30.53%

We just had another thunderstorm here. I couldn't turn on the PC when I got home 'cuz of
it. My pc, like me, is allergic to voltage spikes. I develop severe allergic reactions to hi voltage/amperage.

I have a half a dozen of the $5 surge suppressors layin' around here. I've seen some that go for $205, with protection guarantee, and am wonderin' if the $5 SS'ers, plugged in, IN SERIES, will give the same degree of protection???
 

Relevancy 30.53%

Laptop Asus K a Windows bit Ok so last night I spilled a drink Series of issues over my laptop and I immediately took the battery out flipped over to avoid anymore spilling and cleaned what I could with Series of issues a paper towel Then I took the entire back and keyboard off and dried everything I could with a microfiber cloth it was barely wet but just wanted to make sure I disconnected the power strip touchpad strip and the i think keyboard strip the biggest strip of the I booted about a hour ago after reconnecting the and there s a black piece on each that clamps them all down the largest one has fallen off I don t see any pieces broken though - does it re-attach with ease When I booted it was fine but whenever I typed my password a aj j j etc any idea why So Series of issues I proceeded to take the keyboard off again and try reattaching it the strips basically Now when I boot it says to insert a bootable media drive and press a key again So its gone from keys not working properly to it won t boot period other than giving me that error and I think I ve broken a piece Largest problem getting that strip to stay in there properly and fix the detached black clamping piece Minor for now why the keys are acting the way they do Thanks nbsp

A:Series of issues

I can't help you with the "clamping pieces", but the key's are doing that because there will still be residue in the KB and possibly the Board inside. How long did you leave until turning it back on again? typically, electronic devices such as laptops/smartphones should be stored in very dry places after a good drying and then start up after at least 5 days+ In my opinion anyway.. I've had some success after 2 soakings.
 

https://forums.techguy.org/threads/series-of-issues.1091968/
Relevancy 30.53%

This laptop was new April Was working IBM Series R40 ThinkPad well with one excpetion having to do with the CD drive until a couple days ago Battery is fully charged and machine is usually run from AC Cursor started freezing requiring shutdown and restart from power button That happened while online as well as offline Then restart from power button started to fail to restart the machine button worked sometimes to restart the computer did not work on others Letting it sit awhile sometimes changed a quot no restart IBM ThinkPad R40 Series quot event into a quot restart without trouble and as usual quot event Now pressing the power button lights up system status indicators just below screen for a mini second the hard drive starts to move there s sound under the keyboard for as long as the lights are on then the hard drive sound stops and all of the lights go out except what IBM ThinkPad R40 Series I think I m not sure is the hibernation status light and the AC power light Pressing and holding the power button again shuts down the hibernation light and leaves the AC power light on The screen during all of this is black I looked in the Service and Troubleshooting Guide Startup problems discussed there suggest using the Access IBM button if the operating system does not start Have tried that does not work because the trouble shooting directions tell me to use the Access IBM button when the laptop starts and a prompt is displayed on the screen to interrupt start up and then choose a utilities page for help Can t do that don t have anything on the screen HELP I m in West Chester PA and nearly computer illiterate I just use these machines to get my work done I know little about how they work Or don t work I do not have an XP disc for this laptop the computer was a gift to me from my father the original owner and as far as I know the machine was sent to him with the OS loaded by IBM prior to shipment Even if I had an XP disc for it I don t see how that would help I do not know how to open the CD drive on the side of the machine to put in a CD without the risk of breaking the drawer since the light on the drive is not on unless the machine is working From what I ve been told this machine was state of the art when made and close to wholesale More bells and whistles and other stuff than I will ever use From the invoice this is an R Intel Pentium GHZ with Windows XP-Home loaded on it If more information is needed from me to help just ask I m illiterate in these matters but very good at taking instructions and following directions If the recommendation is that I m going to have to take this thing someplace for major hardware service any good suggestions in my area where someone competent will look at it understand it and not charge me four arms and three legs while failing to fix it With thanks Gaspano nbsp

https://forums.techguy.org/threads/ibm-thinkpad-r40-series.481753/
Relevancy 30.53%

Lately I've been messing around trying to have two routers run in series. I have a Wireless-G Linksys and a Wired Network Anywhere Linksys router. Can anyone help me out. Please explain as simple as you can.
 

A:How to run two routers in series

By default Linksys routers are (IP) 192.168.1.1 (within the setup page of your Router)

But you can't have two same IP addresses, so therefore you must change one of the Linksys routers to 192.168.1.2 (lets say)

Both routers are also probably set up as DHCP, but to make this work only the Router connected to the Internet line should have DHCP enabled

Therefore the Router connected to the computer should have DHCP disabled

Once the two IP are confirmed different
And once DHCP is enabled Only at the Internet end

Then it's just a matter of connecting the ethernet cables up, and testing online.
 

http://www.techspot.com/community/topics/how-to-run-two-routers-in-series.101028/
Relevancy 30.53%

Hey, kinda serial problem, basically every program on my computer is vulnerable, well has had the error message where it says an error was caused in --.dll. After running a program called "Dr.Watson" I got the following information on one of the errors when one popped up.

OLEAUT32.DLL attempted to read from memory that does not exist. It may be using an uninitialized variable, or it may be attempting to access memory after having freed it.

Adobe Type Manager has altered Windows system files.

Module Name: ATMSYS.DRV
Description: Adobe Type Manager
Version: R v4.00-32S058G06NN
Product: Adobe Type Manager
Manufacturer: Adobe Systems Incorporated

Any help be a big help, thanks.
 

Relevancy 30.53%

This is my first laptop and I'm having trouble. Okay, first off i got my laptop connected to my router and it worked fine for about 2 months. Then, when i take it over my mom's house and try to use her router to connect to the Internet, but it doesn't work. So, i come back home thinking i can get back on the Internet, but i can't.

Please help me.

Things gone wrong:
1. wireless connection wizard says i can't create a wireless connection
2. when i click view all available wireless networks it says none are available in range when i know there are
3. in the network setup wizard it says my wireless connection hardware is not connected
4. message will pop up saying 1 or more wireless networks detected and the same thing happens in 2
Help would be greatly appreciated
 

Relevancy 30.53%

Hey all,

I've currently got a second-hand 7950GT which had a voltage inductor break off, meaning I'm going to have to restructure the fans [they will no longer work on the card itself]. This came at a time where I've been overclocking, trying to decrease temperatures, etc.

I'm wondering if, for performance in DX9 games, two 256MB LeadTek 7950GTs in SLi would beat a single 8800GT / 8800GTS / 8800GTX?

I don't have Vista and I don't play DX10 games...yet. For the time being, would paying for a 7950GT at half the price of an 8800GTX and running the two cards in SLi give me a performance advantage?

I could then wait until prices fall on a 8800GTX.

Charles
 

Relevancy 30.53%

I recently build a new computer using a KT6V MS-7021 ATX Mainboard. When I attempt to boot it up, it errors out. The board has an optional Diagnostic LED on the back. The LED lights up with 4 red lights which it says:

System Power ON
The D-LED will hang if the processor isdamaged or not installed properly.

I'm using a brand new Processor, in fact I even tried a second new processor that still caused the same problem. I'm thinking its something else causing the computer to hang. And other ideas are suggestings to what might be the cause would be apreicated.

Thanks
 

A:KT6V series MB help

Is that MSI Products? you should read their FAQs. Please tell us your system specification in brief in here..

Thanks, Lucan
 

http://www.techspot.com/community/topics/kt6v-series-mb-help.24505/
Relevancy 30.53%

Information about video cards AMD Radeon HD 7000 | System Diary Technology News Blog

- all change..!!

A:AMD 7000 series on the way..

sounds like i'll be waiting on one of the real high end 7900 series

Im not going to get a new gpu for a while anyway ,Im waiting on the Bulldozer cpu

Then a new card and the board im useing i wonder how much more it is going to be improved

http://www.sevenforums.com/graphic-cards/175978-amd-7000-series-way.html
Relevancy 30.53%

Hi all, I don't know if it is even possible anymore, but back in the day of the T40, the expresscard slot (or PC card slot?  I don't know what the difference is, if any) could hold many things, including a GPU.  (I even remember discussion of this back when the T510 was new.)  What can the modern Expresscard slot hold?  Can it still effectively mount a GPU?  A card reader isn't necessary with the SD slot underneath it. What do you guys use it for on you laptops (preferably P series, but any would do.) Thanks.




-----------IBM T40: XP PRO SP3, 14.1" 4:3 display, 512MB DDR RAM, 40GB HDD, ThinkLight, DVD.Lenovo Ideacentre H215: AMD Athlon II X2 215, 500GB HDD, 4GB DDR3 RAM, 64-bit Win7, AMD 760G.

https://forums.lenovo.com/t5/ThinkPad-P-and-W-Series-Mobile/Expresscard-uses-GPU-P-series/td-p/3425231
Relevancy 30.53%

How many of you are running AMD 7000 Series in your gaming PC's. I will really appreciate if you people can tell your benchmark scores cause in reviews they use latest possible hardware which not everyone runs so can't really rely on them.

I've read loads of reviews about these and come to conclusion that 7870 is best bet at the moment to go for as 7970 is way too expensive.

Moment of truth, shall I ditch my 5770 crossfire and buy one 7870 or wait for prices to go down further.

Thanks

A:AMD 7000 Series

I would hold, the two current series out right now Nvidia's as well.
These are stepping stone improvements. I honestly believe the next generation will come quickly (fall/winter)
and will be a much larger improvement in real world performance.

The best numbers to look at would be at hardware compare where they just take the actual features of the card and put them head to head for you.

Honestly the 7970 is a serious beast it actually blows away my current card that handles bf3 maxed without complaint. Which is actually kind of my point too though your crossfire rig should be getting pretty good frames even if it's a middle card that kind of sucks at anti-aliasing. I'm guessing your overall experience gaming is not too different from mine right now. (see my specs)
So why bother getting in a rush?
I could be wrong about this, but I am seriously expecting a 7 series nvidia and a 8xxx ati before the end of the year.
...and at the moment I don't see the actual need to upgrade considering the list of games on the horizon and the fact most of them have rather middle range recommended reqs.

The new bioshock I think is among the heaviest reqs of any games comming out before the end of summer anyhow.

Normally just to be fair I would recommend a nvidia equiv for you.
Right now there sadly isn't one, even the gtx680 is slower not by a huge amount but it is slower, and more expensive. So unless you wanted to play with some heavy physx games I don't really see why you would want nvidia right now.

http://www.sevenforums.com/graphic-cards/227933-amd-7000-series.html
Relevancy 30.53%

Hey, i got this disc in from Windows IT Pro magazine, and it says "Springboard Series".

Does anyone know what this is? I can't find info on the net, and i lt a friend borrow the magazine.

Thanks.

A:What is the SpringBoard Series?

See this article. Particularly the last paragraph .
http://windowsitpro.com/article/arti...ringboard.html

http://www.techsupportforum.com/forums/f217/what-is-the-springboard-series-246013.html
Relevancy 30.53%

Como to think of it, both HP and Dell have kind of entertaining and marginally convincing videos/case studies of companies using their workstations (Dell with I think some photographer and a car manufacturer; HP with some 4k video producer). is it me or Lenovo P series does not have an analog video campaign of people/industries using their workstations? I for one, would find such case studies interesting.  edited:sorry; just found a few...(mod, delete at will).http://www.thinkworkstations.com/customer-testimonials/ 

https://forums.lenovo.com/t5/ThinkPad-P-and-W-Series-Mobile/P-series-videos/td-p/3422832
Relevancy 30.53%

So I got W7 for a while now and it's great and all that, but if i try to play any CoD(1,UO,2,4/ 5+6 work) it runs smoothly but after about 5-10 minutes it just freezes completely and I'm forced to reboot. I tried with differed compatibility settings, as admin, with differed settings and with a microphone plugged in and nothing changes.

But also, recently i tried to play CoD2 for a while and it would crash as normal but sometimes I could play for a few hours then I quit, then start playing again and then it freezes up again.

Can anyone please help? Else I'm going back to XP.

I'm running W7 Ultimate 64x

A:CoD series crash

Hi afuz.

First ...

HOW TO FILL OUT YOUR SYSTEM SPECS

In the line at the top of www.SevenForums.com you will see UserCP.
That is an abbreviation for User Control Panel.
Click on UserCP.
In the left-hand column, under Your Profile you will see Edit System Spec.
Click on Edit System Spec
You can copy and paste from the output of Speccy, Speccy - System Information - Free Download to fill out much of the info. Be sure to use the Other Info section of your System Specs for such info as your optical drive, your wireless adapter, your speakers, etc.

Do you have the newest video driver for your card?

Are there patches for cod?

http://www.sevenforums.com/bsod-help-support/119530-cod-series-crash.html
Relevancy 30.53%

I hooked my hp pavilion up after moving and a series of 7 or 8 beeps comes on when i turn on tower.nothing comes on the monitor

A:series of beeps

What is your pavilion number,is it 7 or 8 beeps?

http://www.techsupportforum.com/forums/f10/series-of-beeps-274158.html
Relevancy 30.53%

this computer which is a gateway series model #2900490 is having some problems. when i turn the computer it freezes up at startup. It has a operating system of windows XP with 512 mb,and 80 gigibits hard drive. And also i have seen the blue screen once or twice, but when i restart it, it will start normal. i don't know why but it will freeze up every other time when i turn it on. I do have a virus protection (AVG) and i have donloaded all the windows updates that it is required by windows updates. I also downloaded all the drivers and utilities from the gateway site.I also downloaded GTWUPD to scan the computer and also microsoft fix it and still i have this problem. Iv'e down the CHKDSK to check the hard drive. Please help

tonchis
 

Relevancy 30.53%

so my 7800 gt is dying on me and i think it's time for a new vid card. I was thinking about a 9600 gt i believe is the name and my friend told me i should not get that. he said i should proly try to ge an 8800 gts or the 9800 gtx. i'm not sure which one would be the better way to go. are they both similar in performance or do you guys think i shoudl bite the bullet and get the 9800.
 

A:geforce 9 or 8 series

From the reviews I have seen lately(PC magazine),the 9800 is the
best performing card ever made.
 

https://forums.techguy.org/threads/geforce-9-or-8-series.720189/
Relevancy 30.53%

Hi all just joined and need help. Just bought an ASUS A8V Ai series VIA K8T800pro+ VT8237 motherboard to put my existing ram, agp graphics card and Athlon 64 X2 4400+ processor in. The motherboard doesnt recognise the CPU so I need to update the bios but for the life of me cannot do it.

On Motherboard it says its A8V Rev 2.00, on the box it says A8V-EAYZ and at startup it says A8V ACPI, Rev 1001, at another screen it says RV570 BIOS 702m/581e and again VIA VT8237 South Controller Rev A2.

I know I need to rename the update bios file and put onto floppy but have tried every combination above and at startup I hit Alt and F2 and it reads the floppy but the system does not recognise it, just says bios not found on floppy.

Desperate for help on this please.

A:A8V Ai series motherboard

I think your prob is your M/b is socket 939 and you CPU is an AM2. Ifso they're not compatible.( excuse me if I am wrong).
With regard to the Flashing I came up with the same prob on my Asus, from memory during the process the name changes, I then changed it to the original. Sorry if that sounds a bit hairy but its been a while since I had this happen.

http://www.techsupportforum.com/forums/f10/a8v-ai-series-motherboard-349966.html
Relevancy 30.53%

Hello everyone,

Do to some problems with our previous domain, we have decided to move our website onto a new domain.

This new web site will contain alot of new features, resources, tutorials, and more, and is targeted to the growing communities of video game and operating system developers. This will also be the new hosting site for our OS Development Series, for those who have been following it.

We are going to keep the previous site up to redirect our members. The new web site is located here, under our company name:

http://www.brokenthorn.com
http://brokenthorn.com

Please let me know if you have any questions, comments, suggestions, or ideas

We apologize for any inconvenience this has caused. We hope this new comain will not have the same problems as the previous one.

Thank you,

~Mike ();
 

https://forums.techguy.org/threads/os-dev-series-new-site.642204/
Relevancy 30.53%

hello,
I am new here so please pardon if i violate any rules of this forums.
well,i just purchased dell vostro,1088 notebook,with display drivers ati mobility radeon 4300 series.well i just installed some games like war3,need for speed etc.i experienced a black border at sides of my screen.i tried installing latest updates from ati website but none of them works.even 10.4 failed.it gets installed but nothing really happens after the reboot.i tried all the posibility i could and looking for help here.thanks in advance:

A:ccc for ati 4300 series

Due to the fact that notebook manufacturers modify their INF files, you can't just grab the latest drivers from ATI directly. You'll need to use modified drivers.

You can use this: ATI MobilityModder - HardwareHeaven.com
Or you can try: Welcome to OmegaDrivers.net | Official Home of the ATI and NVIDIA Omega Drivers, PC Gaming Drivers and News!

http://www.sevenforums.com/graphic-cards/82236-ccc-ati-4300-series.html
Relevancy 30.53%

I need to order a part for my desktop p6115y Pavilion tower. I have the product number and SN number but no where can I find the series number in order to order the part. What is the series number? I would truly appreciate this. I need to order a power on/off switch.thank youlinda











Solved!
View Solution.

A:hp p6115y what series is it?

Hi: Here is the parts list for your specific model PC... http://partsurfer.hp.com/Search.aspx?SearchText=NY438AA I don't see a power on/off switch, unless it is the Power LED holder assembly Part # 499769-ZH1  Here is a link with a picture so you can get an idea what the above part is. I'm sure you can get it cheaper elswhere though.  HP sells the part for $35.00. http://www.impactcomputers.com/499769-zh1.html HP parts store... https://parts.hp.com/hpparts/Search_Results.aspx?mscssid=B1EEC56057764B678D868C0D2B08008C&SearchIn=PartNumber&SearchPN=499769-ZH1

http://h30434.www3.hp.com/t5/Desktop-Boot-and-Lockup/hp-p6115y-what-series-is-it/td-p/5684701
Relevancy 30.53%
Relevancy 30.53%

Does anybody know anything?

release dates?

etc?

i have looked everywhere, cant find anything.

all i can find is what prices to expect.....
 

A:ATI HD 5000 series

Haven't heard anything... probably because ATI doesn't plan on releasing new GPUs anytime soon.
 

http://www.techspot.com/community/topics/ati-hd-5000-series.133411/
Relevancy 30.53%

I am running Windows 7 build 7000, and I am having trouble trying to get my video card to work. The card is an ATI 7000 series VE PCI. It is recognized only as a standard VGA adaptor. Are there any known drivers out there. I tried importing my XP driver, but it failed to work as well.

A:ATI 7000 series VE

  
Quote: Originally Posted by nightmare


I am running Windows 7 build 7000, and I am having trouble trying to get my video card to work. The card is an ATI 7000 series VE PCI. It is recognized only as a standard VGA adaptor. Are there any known drivers out there. I tried importing my XP driver, but it failed to work as well.


Welcome to the Se7en Forums

Since many things in Vista are compatible with Windows 7, I did a search for a vista driver for your video card and came up empty. If any of our resident gurus know of a trick or two for this, feel free to contribute.

http://www.sevenforums.com/graphic-cards/1266-ati-7000-series-ve.html
Relevancy 30.53%

Right, I had been debating with myself whether or not I'm going to get one of these monsters, when I discovered that I'll need to upgrade my power supply. Having asked around a bit, I was told I'd be wanting in upwards of 650W, which sounds like an awful lot. I don't want to have matched the cost of my new graphics card in electricity bills within the year, afterall.

But imagine my suprise when I read in a review that the GTS version (which I was considering) only requires 400W, while the GTX requires 450. Can anyone sort this out for me once and for all? What are the actual power requirements?
 

A:GeForce 8 series

It depends a lot on the amps on the 12V rail.





Appearing at http://www.tweaktown.com/articles/977/2
As far as power requirements go, the GeForce 8800GTS will require a minimum 400 watt power supply (with 12V current rating of 26A). The GeForce 8800GTX will require a minimum 450 watt power supply (with 12V current rating of 30A) and you can double those numbers when you start talking about SLI.Click to expand...

Personally, I'd use at least a 500 or 550 watt power supply for the 8800GTS and GTX, respectively; but you may be able to get away with what the article says. It also depends on hard drives, etc. With graphics monsters like that, too, I'd use only power supplies from a select few vendors, such as Corsair, PC Power & Cooling, SeaSonic, Antec, Enermax, or FSP. That's about all I can think of for now.
 

http://www.techspot.com/community/topics/geforce-8-series.71217/
Relevancy 30.53%

2 days ago, my computer was running nominal and there was no problem until i downloaded TAP 32 and SecurityKiss. I have a bad habit of force shutting down computer by the power switch. When I rebotted, I had a BSOD. So That was that i chkdsk /p and fixboot. When I Reboot, i get the windows defender error, the rpc error and another error. Up to today these are the problems i faced:

-Software errors
-Taskbar missing or if its visible it doest show the running programs
-Audio Doesnt Work
-Error 711 that deals with internet connection
-Error 1048
-I cannot get connected to some servers like i used to do
-System Restore cannot start

I want to fix this as quick as possible because i have very much important documents to process in 2 days time. Thanks In Advance.

A:Series Of Errors

you are infected. Head over to the Security Section of this forum and post over there. they will help you.

http://www.techsupportforum.com/forums/f10/series-of-errors-505382.html
Relevancy 30.53%

So where do I begin It all started a few days ago when I booted up my problems. A series of computer like any other day and about minutes later I suddenly get a message within my tool bar A series of problems. area that says something along the lines of quot system quot quot quot quot quot exe is corrupt quot It said to run the quot dskchk quot application I sent in the error report to Microsoft where it then sent me a link to the the help page It said to open A series of problems. up the command prompt and enter I believe quot dskchk quot then press enter After that it said to enter another series of commands which I can t quite remember unfortunatley After that my computer restarted in order to diagnose the problem I believe After all that happened my computer restarted but then suddenly gave me the quot disk boot error please insert system disk quot problem Like an idiot I sorta jumped the gun and I think I installed another copy of A series of problems. Windows XP on the hard drive So now when I boot up my computer there are two versions of Windows XP to choose from The first one works and is a bare bones version with none of my precious files on it The second one is what I believe has all my files and everything that I would like to get back However it will not let me into that copy of Windows XP What the hell did I do and is there any way to save my files nbsp

Relevancy 30.53%

who has this computer, i want you to create a recovery disk for me and send me the files on it plz, very urgent.

http://h10025.www1.hp.com/ewfrf/wc/d...n&dlc=en&cc=hu

A:HP Dv7-4000 series

Hi contact hp they will be able to provide discs for you for a small fee

http://www.techsupportforum.com/forums/f217/hp-dv7-4000-series-529105.html
Relevancy 30.53%

IBM THINPAD SERIES TYPE PENTIUM WINDOWS ND EDITION sometimes opens fine st time more often you get when switch laptop on you just get no-where with irriatating messages error then it lists these numbers at the bottom offers ok or cancel neither of which get you to anyway pressing cancel series thinkpad ibm 600 lists those numbers again with NO options to exit or cancel etc ibm thinkpad 600 series amp no mouse mouse is on st screen mentioned doesn t respond to ctrl alt delete at this stage have to switch off manually if you slect the ok instead of cancel at the error prompt the st screen which comes up after switch on it gives you a date check screen amp time etc amp only ok or cancel at bottom if you select ok it re-boots then offers yet another screen still no thsi one says off with an arrow pointing towards word on to which I assumed it is asking me to switch off then on again no mouse here either if you switch off then on again THIS DOES ENTER OK how do I stop this silly error sequence prior to screen by the way no probs running windows I don t think it is the o s when you st switch on top left screen says ok with directly below words ibm top rt amp thinkpad bottom left but even if you shut windows down correctly it brings the error messages above sometimes with just but other times with all numbers listed amp sometimes the beneath the error messgae you are offered test or re-start test gets me now-where either apprs to do all sorts internal checks then nothing gets me to re-start just brings another message lists only then red equals sign crossed-out ok white arrow pointing to ibm manual presume means look in book which I haven t got no mouse at this stage It does respond to ctrl alt del brings error message again Finally if you ever reach the screen it only takes up say a of whole laptop tft I know to go into settings of display amp move slider but it doesn t allow you to move slider Colour is set to the only other choice being colours b w hope you can spare time to help regards TIM nbsp

Relevancy 30.53%

I purchased a new problems A series of Dell in December that had Windows Home Premium Version already installed Also installed was Norton anti-virus All went well until the Norton free day ended and I downloaded a trial version Norton which I believe was version I began to notice a slow down in internet response This was followed by simply having the internet stop working with the error message indicating this When I would hit a search from google I would often be taken to a totally different site not related to the original request Finally at times when I hit the icon for Explorer nothing A series of problems happens and I need to reboot the computer to get this to work I contacted Norton and took all Norton products off the computer using their removal tool and installed PC Tools Spyware Doctor with Anti virus as I had a remaining computer on the initial subscription I maintain with serveral other computers in the house Since removing Norton there has been some improvement but all problems continue I sent PC tools yesterday a scan of my computer to have them search for malaware No response back as of this writing I am open to any ideas and could not find anything totally on point searching the various threads Thanks

A:A series of problems

Hi and welcome to TSF have you cleaned out internet explorer,use the tools button on the upper right handside then internet options and delete the browsing history,also run the clean up tool in system tools and defrag let us know how it goes

http://www.techsupportforum.com/forums/f217/a-series-of-problems-457979.html