Windows Support Forum

Timeouts & Other Network Issues

Q: Timeouts & Other Network Issues

So this thread is probably going to have a lot of information on it Timeouts Other Network Issues & but please don Timeouts & Other Network Issues t be discouraged I really really need help with some issues I ve been having and if someone could solve this for me that would be amazing So I ve been experiencing timeouts It seems I get timeouts whenever using Timeouts & Other Network Issues some sort of wired connection If I used an ethernet cable connected to my router I would get timeouts in several applications such as Minecraft and Teamspeak If I used Wireless I was fine So after lots of troubleshooting I couldn t find a fix so I ve been using Wireless ever since Lately however my wireless has been unusually slow not for everyone in the house just for me So what I did to solve the issue is I setup a D-Link DIR in my room to act as a Wireless Access Point I now get slightly faster speeds and bar connection rather than the bars I was getting previously Now I thought I wouldn t get these stupid timeout errors when connecting to this Wireless Timeouts & Other Network Issues Access Point turns out I still do On Teamspeak for example I will be talking to people and everything will be completely normal I won t lag or anything and then BOOM I get disconnected As I said no lag no warning I just get disconnected It s almost as though my router is randomly cutting me off So what I thought I d do was replace my primary router BoB Lite with the D-Link DIR and then use Wired connection because I assumed that the BoB Lite was causing the timeout issues Now I can t even connect to anything wired I must have changed a setting when troubleshooting or something But now I can t source internet from my laptop ICS and I can t connect to my original or new router wired The only way I can currently get internet is by using the DIR in my room but I still get timeouts when using applications such as Minecraft and Teamspeak So yeah multiple issues Firstly if I could just solve the timeouts then that would solve everything I could continue connecting to the modem in my room and everything would be fine OR is there a way I could someone reset all my network settings that I may have messed up when troubleshooting As I can no longer connect to any modem with a wired connection not even the DIR which could have solved the problem If anyone could help me out that would be GREATLY appreciated This is a really annoying issue and I ve tried to troubleshoot it myself for ages now but with no luck IF anything in this thread doesn t make sense to you please tell me and I ll gladly explain myself Additional Summarised Information My primary router is a BoB Lite my ISP is iiNet The modem in my room is a D-Link DIR I m using a NetComm N USB Adapter to connect to Wi-Fi I m using Windows Ultimate -bit Thanks very much Innug nbsp

Relevancy 100%
Preferred Solution: Timeouts & Other Network Issues

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link (This link will automatically start a download of Reimage that you can save to your computer.)

A: Timeouts & Other Network Issues

Get a command prompt
enter PING

does that timeout or return timing values?
Relevancy 19.35%

I recently bought a Laptop with an unknown OS (I forget the name, but it wasn't windows) and had to format it, and afterwards got Windows 7 working on it. For some reason, I'm not getting any wifi, help please

A:Issues with WIFI on new PC

Also, if it makes a difference, I'm able to connect to the internet with a cord, just not getting wifi
Relevancy 17.63%

To start off my laptop is an Asus G VW-AS The wireless network adapter is an Atheros AR WB-EG The issue I m having only starts when I play an online game It s not a specific one it happens with all my games After about a few matches I will begin to experience terrible lag spikes Ranging from - ms sometimes even going up to over Usually the spikes are permanent I will jump to around ping and hover in that general number with it occasionally sliding back down to my normal only to immediately spring back up again After this begins to happen any application I use that uses internet internet browser skype etc also lags is severely slowed down This lag is never experienced on any other system using our wireless internet which makes me believe it is in fact my laptop s wireless adapter that is the problem Doing a windows troubleshoot on the adapter DOES fix it but it only fixes it for about to minutes and then I begin to lag adapter network Problems with wireless again Also the troubleshooter seems to only be able to fix it once If I try to troubleshoot the adapter again after already fixing it before that way the troubleshooter will tell me that it couldn t find anything wrong Manually restarting the adapter only works once as well Restarting the computer does not help the problem If the laptop is shut down for a few hours and started back up the adapter will work properly as long as I do not start a game Could anyone help tell me how to stop this from happening Do I need to get a new adapter or is there something I can do for the current one nbsp

A:Problems with wireless network adapter

Are you sure it is not an issue with your router? Also I dont know where to get Atheros drivers other than from the manufacturer (vaio, lenovo, etc) website. There are no official drivers
Relevancy 18.92%

Hi guys Recently I ve been having trouble connecting to my mobile phones WiFi hotspot with my laptop I can connect to the hotspot with any other device such as the tablet I m using now and I can also connect to any other WiFi using my laptop The problem appears to exist purely between my laptop and my phone When issues hotspot Mobile attempting to connect it will begin authenticating and then disconnect offering me the troubleshooter Sometimes there is a small volume of packet transfer but not often I have tried disabling and reenabling all of my network adaptors to no avail and I m somewhat at a loss of what to do Mobile hotspot issues next The phone in question is a Motorola razr I if that helps but I have to point out that it worked flawlessly Mobile hotspot issues until recently I suspect the culprit may Mobile hotspot issues be hamachi as it had very recently been installed onto my computer at the time and it appears to be a known trouble maker But I still don t understand why no other problems have arisen Hamachi has been uninstalled but the problem persists Any suggestions or ideas that could help would be greatly appreciated Thanks for your time guys Mencil nbsp

A:Mobile hotspot issues

What OS is on the Laptop and which Firewall are you using?

The problem appears to exist purely between my laptop and my phone. When attempting to connect it will begin authenticating and then disconnect, offering me the troubleshooter.Click to expand...

huh? Connecting how: Bluetooth, Infra Red? The WiFi adaptors of both the phone and the laptop are never going to connect, unless you're attempting peer-to-peer which has limited utility.

If you're connecting via a router, then the PC is not the issue.
Relevancy 18.06%

First of all, sorry for my bad english.
My pc was working perfectly for about a year now, but these days it started having problems.
In the past few weeks it started disconnecting from the internet with the message: you don't have a valid
ip configuration. (It was working on the other pc connected to the router with lan, and on the notebook connected through wifi)
A reboot of the pc/router did always solve my problem in these situations.
Yesterday, my internet connection started connecting/reconnecting, and I couldn't solve it in any way, not with
a restart, and not with that network repair tool (idk it's name, I have hungarian windows). When it stayed connected for more then 2 seconds I was even able to load google, youtube, other sites,
I tried some solutions, like disabling the energy saver settings, setting it to 10mb half duplex, etc, but nothing worked, my
internet kept connecting/reconnecting.
Today I started my pc and it works perfectly.. Any ideas on how to solve it? I have the newest lan driver.

My mobo is Asrock 960gm-vgs3 fx.

A:Network keeps reconnecting

It appears that you manually configured the IP for at least one system.
DON'T do that - - make sure all systems use DHCP
Relevancy 18.49%

AMD has released an updated statement regarding the noise issues experienced by the initial buyers of its Radeon R9 Fury X graphics cards.

Read more

A:AMD issues updated statement regarding Radeon R9 Fury X noise problems

Are they saying "screams like a banshee until we smothered it in glue"? Does anyone have a more engineered approach to the issue - like decibels at a specific distance?
Relevancy 17.2%

Resolved DNS on other on one problem working laptop, DNS network computers problem on one laptop other computers on network working I returned home for the holidays with my laptop running Windows Enterprise -bit When I connect to the wireless network my laptop reports that it is connected with internet access but there is no browsing capability at all P P works Steam works but Chrome Firefox Steam browser give me DNS problem on one laptop, other computers on network working the quot This webpage is not available quot page telling me that the DNS lookup failed All the other computers at home are working happily My settings were to obtain an IP address and DNS server address automatically nslookup said DNS request timed out It didn t work with the wireless or the wired internet with an ethernet cable I set up another network by using my iPhone as a hotspot to make sure it wasn t an issue with all connections and my computer could browse just fine using the iPhone hotspot But it didn t work with my home connection The first thing I tried was to use openDNS s DNS addresses and with my home connection It still failed and nslookup gave the same quot DNS request timed out quot I reset the modem router it s combined unfortunately to factory settings and tried directly connecting with an ethernet cable again It worked for half a second and I opened webpages before it stopped and gave the DNS errors again I tried the wireless internet and it still didn t work I can connect to the modem router I made a guest network just to try it and I got DNS errors again When I reconnected to my primary network it worked for half a second again then stopped My next attempt to fix it was going to the cmd prompt and typing ipconfig release then ipconfig renew I restarted my computer and tried again but I still received the same errors with P P working like before I turned off my firewall and tried but it still didn t work Then I tried ipconfig registerdns restarted my computer and tried again Still didn t work At this point IPv has been disabled but it s still not working I restarted the modem router multiple times but it does nothing to alleviate the problem I have Microsoft Security Essentials did a scan nothing detected Also tried System Restore to two days ago got an error about how it failed Summary Using openDNS address Turned off IPv ipconfig release ipconfig renew ipconfig registerdns no virus trojan system restore failed None of the above worked Other computers at home using the ISP s provided DNS server work My computer works with other connections but not my home network Is there anything else I can try Thanks in advance nbsp

A:DNS problem on one laptop, other computers on network working

Fe3C said:

Using openDNS address.
Turned off IPv6
ipconfig /release
ipconfig /renew
ipconfig /registerdns
no virus/trojan
system restore failed

None of the above worked.
Other computers at home using the ISP's provided DNS server work[1].
My computer works with other connections, but not my home network.Click to expand...

Good work. The router is fine[1] so don't fuss with it anymore.

Look for an updated driver for your WiFi adaptor.

On any working system run IPCONFIG /ALL and compare it to the results on the failing system. Look for missing Gateway address or IP address like 169.x.y.z

Some concern re failing system restore, but that's not a networking problem per se.

Work on a wired network first and then move to wifi.
Empty all manual settings on the LAN Connection (get properties, scroll to tcp/ip, click property button - - check ALL tabs; delete everything.

You should be able to PING and then PING
This shows the LAN adaptor has connectivity and DNS resolution.

Now do the very same sequence with your WiFi connection.
Disconnection from the router and then reconnect.
Inspect IPCONFIG /ALL again to look for valid IP addr, gateway addr and valid DNS settings. (not the OpenDNS you had before).

ping ; if this doesn't work, then the WiFi settings are invalid even before DNS is an issue.
Relevancy 18.92%

Hi I would appreciate if someone could help me please The problem I have has been going on since about the time I formatted my PC and reinstalled Windows Had issues with BSOD on install because of my graphics card seem to have been slighty dislogded See http www techspot com vb topic html Okey the problem is my mouse keeps freezing up after a while and after moving it or clicking a couple times it works again When this happens I get either a beep or the usb disconnect connect sound depending on which mouse is being used Current using Windows mouse issues freezing 7 Bluetooth Apple Magic Mouse connecting to a generic Windows 7 mouse freezing issues bluetooth dongle this makes a beep when Windows 7 mouse freezing issues it freezes The USB Wireless Logitech Dongle Logitech Mouse I had before this made disconnect connect sound The USB Wired Mouse before the Logitech also made disconnect connect sound I have tried to work around this using several methods but have had no luck Steps taken to try and rectify issue Changed mouse I am on my th mouse now I will not change for another again the mouse is not the problem Tried all the mouses on other computers where they all worked fine I have switched ports on numerous occasions all other device work with no problem keyboard touch screen monitor external hard drive s usb flash I have removed conflicting hardware and ensured only on mouse is plugged in also removed touchscreen cable from monitor I have gone to Device Manager and set USB Root Hub and Power Management tab and unchecked quot Allow the computer to turn off this device to save power quot on all devices I have removed drivers for all other mouse s used previously I have disabled C E as this uses some power saving methods I have check Event Viewer which only has networking errors which all forward to my network drive I have run System File Checker SFC sfc scannow I need to know whether Windows is the issue or whether its the usb ports Can anyone please help me as it is now really bothering me I can t even play Battlefield games Thanks nbsp

A:Windows 7 mouse freezing issues

This is a problem I have not seen before. Try using this guide to find any other mouse drivers that you may not have deleted.
Relevancy 18.06%

Hey guys,

I had a quick question about a network at home.

My house is 15m tall and 9m wide, I want to network 3 computers (mine, wife, son).

Should I wire the house with Ethernet cat 5e cable and put a 100 base T switch?
Just put a Wi-Fi access point and Wi Fi cards for the 3 computers.

I prefer wireless, but I?ve heard Ethernet would have slightly faster speeds due to less aerial interference.

Suggestions? Solutions? Thank you!

A:A network for home? Which one?

First of all... don't put a 100 base T switch anywhere but the backup bin. If you're going to bother wiring anything put in GbE as it's inexpensive now. Also, if you're going to bother with any wiring then I'd put in the best/fastest type I could find to future proof it as much as possible. Fishing cable isn't something you want to repeat in a couple of years.

To more directly answer your question, Wi-Fi will probably be fine for you depending on the distance from your WAP (wireless access point) and what your walls are made of. You'll also need to keep in mind any other Wi-Fi interference so the distance to your neighbors can have an affect. All that being said any modern WAP will be faster than a 100 base T switch under normal conditions when it comes to throughput (how much data you can move) - but worse when it comes to latency (how long a specific bit of data takes to get from one point to another). If you're playing games you'll want low latency. If you're just streaming content or moving files around then you just want throughput.
Relevancy 17.63%

Ok so I do not know if this is the right forum or site to ask this question to be honest It applies to Linux though more applies to a networking issue So here is the problem I currently live in an apartment that has its own network that is given to them by their ISP So my router is getting its ip address from their DHCP server router and then I give out my own problem Apartment Network IP address via my own router So Im trying to be able to SSH into my machine or even just to remote desktop onto my Windows side I have my router set up accordingly and I can ssh into my machine when I am on their own network not my own but when I am away I cannot because Apartment Network problem my routers IP address is unique in the apartment complexes network Does anyone know a solution to this I was thinking a VPN into their network Apartment Network problem and then SSH into my own afterwords Problem is I m really not sure if this is a solution and if so How do I do it Thank you for your time I hope someone has a solution to my problem nbsp

A:Apartment Network problem

This is a STATIC route or PORT FORWARD problem and without the consent the apartment owner, neither are possible.

Your data flow is

ISP == Apt.router---Your.router---your.pc
Assume the Apt.router is at address
If yours is anything else, then your lan is isolated from the apt and you have great security.
* to get Public access (eg from work) to your pc, you need to
cross the Apt.router nat, get to your.router and port forward to your pc - - complicated.​If your.router is on the Apt.lan (meaning you disable DHCP in your router)
you are exposed to all the other apartments,
and still need port forward to your PC, and that requires a FIXED address assignment in the apt.router.​
IMO, the conclusion is this is non-trivial, has dependencies on the good will of the apt owner/tech support guy and requires extra diligence on your systems for security & privacy.
This would need (imo) to be more than just 'I want to play games on the Internet'
Relevancy 17.63%

So I'm in the market for a new wireless card for my desktop. The last one I bought was a piece of crap from the start. You don't generally see network card reviews. Was wondering what some good quality options would be.

A:Network card recommendations?

The best option would probably be a dual-band one that has 802.11ac support; if you've got an AP that supports the standard, it'd be worthwhile investing in that kind of card. They can be kinda expensive though (usually around $100 from what I've seen).
Relevancy 15.05%

I have a desktop computer that is running on Windows Xp, up until this morning, everything was fine, I could connect to the internet with no problem.

I turned on my computer, and it is telling me that the network cable is unplugged, as well as my network is not showing when i go to "my network connections"

But yet.....

I AM connected to my router, and there is no problem with the cord (I tried it on different computers as well as my Xbox 360 on the same I know its not the router)....when I go into device manager, everything seems to be working correctly, and my network adapter and ethernet card both are marked as working properly.

Any ideas how I can fix this issue ?

A:"Network cable is unplugged" but its really not..

sadgyrl514 said:

I have a desktop computer that is running on Windows Xp, up until this morning, everything was fine, I could connect to the internet with no problem.

I turned on my computer, and it is telling me that the network cable is unplugged, as well as my network is not showing when i go to "my network connections"

But yet.....

I AM connected to my router, and there is no problem with the cord (I tried it on different computers as well as my Xbox 360 on the same I know its not the router)....when I go into device manager, everything seems to be working correctly, and my network adapter and ethernet card both are marked as working properly.

Any ideas how I can fix this issue ?Click to expand...

Try rebooting,
Relevancy 18.92%

It's been a long time since I last posted on this forum but this has been stumping me as of late.

I have a Thermaltake Water 2.0 Performer liquid cooling loop for a while and lately they have been acting up. I noticed that my temperatures on idle could sometimes go up as high as 80 celcius, which is absolutely not right.

This happened after I serviced my machine, and I think I bumped the liquid cooling around in the process of it. I noticed however, if I keep knocking my radiator on the side, the reported temperatures get cooler, and I notice that I can feel the hot air being dissipated from the fins (previously cool). The thing though is that after leaving it for a while again, the fins don't seem to dissipate anything, and the cpu temps start rising again.

I have a feeling that there are air bubbles getting stuck in the loop somewhere, but I have no idea how to get them out or at least out of the way in a closed loop.

Anyone have any suggestions/ideas?

A:Water Cooling Loop issues

Remove the cooling pad from the CPU. Make sure that the top of the CPU is clean. Apply new heatsink compound if it is used and re-assemble
Relevancy 17.63%

Recently my Gbps has taken a serious nosedive I was around Gbps then it dropped dl Adapter 0.84Gbps Network The other computers on the network are getting Network Adapter 0.84Gbps dl great speeds it s just my computer My computer is running fine It s just the connection speeds This isn t just happening on WI-fi it s also happening when I plug in the Ethernet cord My network adapters are Broadcom n Network Adapter Microsoft Kernel Debug Network Adapter Qualcomm Atheros AR PC-E Gigabit Ethernet Controller NDIS They are all up to date And I use Avast internet security Also I ve cleaned the cache in both firefox and chrome browsers I ve also removed all but add block add-ons I m using AARIS modum router through time warner cable And again the Network Adapter 0.84Gbps dl other computers are getting great speeds always up of Gbps I even checked my Mom brand new computer which is getting upwards of Gbps I ve called TWC they sent someone the wires were a bit loose and it fixed everyone s laptop but mine Please help I m clueless here Here is the Broadcom n Network Adapter settings - auto mhz - Disabled n Preamble - Auto Antenna Diversity - Auto AP Compatibility Mode - Higher performance Bandwidth capability - b g MHz Bluetooth Collaboration - Auto BSS PLCP Header - Auto Short Long BT-AMP - Enabled Disable Uon Wired Connect - Disabled Fragmentation Threshold - IBSS g tm Protection Mode - Auto IBSS Mode - b Only Locally Administered MAC Adress - not present Minimum Power Consumption - Enabled Mixed Cell Support - Disabled Power Output - Priority amp VLAN - Prioroity amp Vlan Disabled Rate - Best Rate Roam Tendency - Auto Roaming Decision - Auto RTS Threshold - Shorti GI - Auto WMM - Enabled WZC IBSS Chaneel Number - MHz XPress TM Technology - Disabled nbsp

A:Network Adapter 0.84Gbps dl

Also I recently installed windows 8. I've tried all sorts of things to get it to work. Still no luck.
Relevancy 18.49%

Hi all So I got G today from an online webstore today I ve been using a super old button logitech back-up mouse since my G died I ll describe my procces thus far Plugged in G when computer was on No sign of life windows tries to install a driver fails Device manager lists the G under Other devices with a yellow triange telling me no driver is installed Then went to logitech com to download the drivers and support software LGS LGS being the Logitech Gaming Software utillity that is the only downloadable support from logitech com fails to recognize my mouse just the G keyboard I Logitech issues G502 connection/recognition mouse have Tried the troubleshooting option of rebooting and re-installing the LGS no dice However the G does light up during booting up Booted the computer with the backup mouse unplugged and the G plugged in It works cursor movement left right click no advanced buttons for - mins before going back Logitech G502 mouse connection/recognition issues to the Device fail to install and the Device Manager placing it under other devices etc Plugged my backup back in tried manually updating drivers in the Device manager selecting it as a Mice and other pointing devices type of device and choosing the drivers from LGS drivers LGSHidFilter tried all subfolders of drivers but this one was the only one that held any inf files the Device Logitech G502 mouse connection/recognition issues manager recognised as a good drivers Selected the g driver No G driver was listed only a G s It tried to install but gave the error Device could not start code After reading threads in the logitech forum tried the FWUpdate a firmware update for the g option but installer tells me to connect my mouse before proceeding Even though my mouse IS plugged in Plugging it in and out doesnt help As for now im at my wits end I even tried borrowing someones g mouse and encoutered much the same issues All I can think of is to race from booting up with just the G plugged in to either the FWUpdate or the manual install from the device manager and see if the install goes through when it still works Seems rather unlikely and a silly way to go about things I hope anyone with similar issues can help me out any advice is super appreciated P S oh using Win ultimate bit nbsp

A:Logitech G502 mouse connection/recognition issues

I just fixed this exact problem on my Win7 Media Center x64. It's a bit convoluted, but the core of the issue is Windows not recognizing the device type properly. What you have to do is open up Device Manager and assign the drivers for Windows. This should fix the mouse.

Head into Device Manager and click View up top. Choose Devices by Connection. You'll see why in a second.
Expand the top entry until you find a PCI Bus. Expand that, then expand all the USB Host Controllers. One of them should have an entry for G502 Gaming Mouse under it.
Right click it and select Update Driver Software, then Browse My Computer for Driver Software. Now click "Let me pick from a list of device drivers on my computer."
Go down to USB Devices and install it as a USB Composite Device. The mouse should light up. Nice! It still doesn't work, though.
Now there'll be two more entries underneath the USB Composite Device, both of which should be G502 Gaming Mouse. Right click one and go back to the list of device drivers. This time go to Human Interface Devices and select USB Input Device for each of them. A bunch of new devices should populate beneath each USB Input Device, one of which should be HID-Compliant Mouse. Your mouse should now work!
Relevancy 30.96%

I have an installation folder on my main machine(Windows 7) with all my software. I have repeatedly run into issues connecting odd devices to my shared folder. This time I have installed Windows 10 Technical Preview (on a different machine) and don't understand why it tells me I can't access my own machine. After all these years, you would think user friendly would be a reality. It seems to be a coin toss as to which machines will connect. I hate never knowing I can access my own machine without issue. Here I am trying to install applications but yet I can't get to my storage location.

What is the secret to sharing your machine, so that anyone on the same network can access shared folders?

Edit: I always turn on "Network Discovery" and "File and Print Sharing".

A:Network connection issues (year after year)

I'm more brutal via the firewall:

set trust localhost and your lan ip's, eg

then add two rules for only the PRIVATE PROFILE

inbound allow tcp/udp from to any for ports 137-139,445
outbound allow tcp/udp from any to for ports 137-139,445
I use a much more complicate scheme in reality to enforce known vs unknown devices and to segregate WiFI from wired access, but that's just me.

In services, ensure these are running

Bonjour Service ( mDNSResponder)
Network Connections
Network List Service
Network Location Awareness
Relevancy 18.49%

Hello guys I have not been here in awhile but I hope there s someone out there PS4 Firewalled Xbox One issues NAT Double - and (Modem/Router) that can help shed some light on the issue I am having Hopefully someone can suggest a fix and it ll all work or at least point me in the right direction Xbox One and PS4 NAT issues - Double Firewalled (Modem/Router) and possibly explain anything I may be overlooking or misunderstanding I have a basic understanding of networking so I can work my way around my routers and modem etc To start a small introductory of my issue as you can see from the title I have an issue getting Open NAT for my PS and Xbox One I have firewalls to go through my network setup is as follows Modem gt Router Router Router Bridged gt Device However I have other Routers in the house that are bridged to extend strengthen signal in different parts of the house I have opened the suggested ports for Xbox One on both my Modem ZyXel P- R-F and my Router TL-WR ND I have not configured any special settings on the bridged routers the PS connects by wire Xbox one by wireless same floor as the main Router I have followed guides on setting both of them up First on Portforward com then found a video for my ZyXel modem and it suggested to disable the Active Firewall and Bypass Triangle Route Also to change the NAT SUA Only changed to it was Lastly it suggested to turn off the Enable SIP ALG setting For my router some suggested to just let UPnP do it s job and disable the Port Forwards Virtual Servers it s called in the settings I have tried with just UPnP and with Port Fowards neither make a difference I even disabled the Port Fowards on the Modem and had UPnP on both but to no avail To clarify something if I use Port Fowarding should I have UPnP off OR will they work in together I have done restarts on all devices router modem Xbox One when any changes have been made On my XBO I have turned it to quot Energy Saving quot mode as I have read in several places that it can effect UPnP negatively if it is in quot Instant On quot mode I have tried to set the Reserved Address in my Router for my XBO as another site video said that having a Static IP set on the XBO can cause problems I have tried the static IP set through the XBO and through the router neither makes a difference On my Router I have several firewall settings that are not mentioned by any guides as to if they should be altered the settings allow me to Disable or Enable All currently enabled Firewall SPI Firewall VPN PPTP Passthrough L TP Passthrough IPSec Passthrough ALG FTP ALG TFTP ALG H ALG RTSP ALG I also tried to set up Port Triggering to see if that would help and set the protocol to ALL for all of them originally set them up to the proper TCP UDP but it wasn t working so I changed it to ALL But that did not work either I am not sure if I am missing any other information feel free to ask for anything I am missing My LAN address for my Modem and Router are different eg Modem and for my Router Will this effect how NAT works or cause my issues Thank you P S I know I have not added any troubleshooting for the PS I do not own it and I want to get one device working before I start fiddling with the next nbsp

A:Xbox One and PS4 NAT issues - Double Firewalled (Modem/Router)

Is there no one out there who's network expertise could help me? Hoping this one bump will get this some attention as I have tried everything possible I can with my setup that I can think of, need some fresh ideas.
Relevancy 16.77%

As you've probably heard by now, Nvidia is having a few issues with their GeForce GTX 970 graphics card. In response, AMD has lowered the price of the card's main competitor, the Radeon R9 290X, in an attempt to get...

Read more

A:AMD cuts Radeon R9 290X price amid GTX 970 "issues"

Meaning AMD could have been selling the card cheaper this whole time.

AMD needs to stand more firmly in their business decisions. Changing prices on a whim every time the wind blows, shows lack of confidence in their product to sell itself.
Relevancy 18.49%

I have an Acer that spontaneously decided I no longer needed to play games. Everything else works perfectly fine. It's been doing this for the past few weeks and I've done all that I can. I'm no tech wizard by any means and I need some help. Pretty much it'll open to the load screen for a few moments then disappear back to my home screen. Any ideas on what it could be and what I can do?

These are the specs:
Acer Aspire V5 Touch with Windows 8.1
Aspire V5-V561PG-9683
Model number: Z5WV2

If you need more info let me know, I still have everything for it.

A:Acer Aspire issues; Games no longer work

If you are talking about the games that are loaded by a app. You will need to uninstall the app. Then reinstall the app. I have no ideal why this happens . But I have seen it more then once.
Relevancy 18.49%

So I recently picked up this monitor for some sweet 144hz gaming. Used it for a while at 144hz and it worked perfectly. Recently hooked up a second monitor and noticed a drop in frames. Went to check my advanced resolution settings and for some reason my monitor had defaulted to 60hz. When I tried to bump it back to 144hz I get this weird flickering/artifacting going on but it works great at 120 hz. I am using the dvi cable that came with the monitor and I'm running a gtx970 overclocked to 1430hz gpu and 7600 hz memory. I get this effect when I default my gpu to it's factory oc settings so I'm not sure what's going on here. Is it my gpu or do I need a new dvi?

Relevancy 18.92%

Hey guys my device is hp compaq 6200 pro microtower pc
serial no. : SGH125P585
n product no. : XL504AV

I have inbuilt intel hd graphics n no installed a external one n plannin to upgrade gpu
I have 320 watts of psu n plannin to upgrade to 550 watts

I have a pci x16(2.0) pci slot
but dont know whether it is low profile or full height ???

my pci bracket is 4.2" long so it must be a full height na!!!!!!
I wana know how much long graphics card my device can support!!!!

I wanna use a mid -range
msi nvidia gtx 750 2 gb oc ddr5

leadtek gtx 750 2 gb oc ddr5
both d graphics card support my device?????

A:Graphics card issues

rockyrulz said:

I have 320 watts of psu n plannin to upgrade to 550 watts

I have a pci x16(2.0) pci slot
but dont know whether it is low profile or full height ???

my pci bracket is 4.2" long so it must be a full height na!!!!!!
I wana know how much long graphics card my device can support!!!!Click to expand...

I'd say yes you have a full height card. The half-height is only about 2 inches. If you upgrade your PSU to 550 like you said you would, I see no reasons why you couldn't run a 750. The 750's are not long cards and should fit in your case with ease.
Relevancy 18.92%

I am confused and have no idea where to start... I apologise in advance for the wall of text.

Recently I have been experiencing odd issues with my WiFi router ( at least I think its the router) ZyXel Keenetic Giga II. The most annoying of which is the periodic inability to load random webpages. For example, I might be able to load google but not any of the search results while at the same time being able to browse reddit on my phone or tablet. The pattern changed constantly and it doesn't seem to affect any particular web pages. Like I said - random. This happens once or twice a week and seems to be increasing in frequency. I have tried rebooting the router. Rolling back to factory settings, changing DNS. With no result. It only resolves itself when it "feels" like it and usually lasts from 5 min to several hours. It is also worth mentioning that I hardly ever use my laptop and most of the browsing and streaming is done using various mobile devices.

Any help in defeating my router would be greatly appreciated.

A:Strange issues with WiFi router

Describe "The most annoying of which is the periodic inability to load random webpages" in detail please - -
Relevancy 18.92%

Hello So long story short I have had networking issues across the board on my home built desktop for over a year and a half now Basically my Odd Performance -- Fluctuating Issues Wi-Fi internet success fluctuates throughout the day and some programs Especially Origin absolutely fail to reach a fraction of my internet speed Doing speed tests on Odd Wi-Fi Issues -- Fluctuating Performance devices throughout my home network I am receiving a mean download speed of down While my desktop can barely manage to reach down My network adapter works fine I m typing this from my desktop as we speak and I have replaced it a few times I have been looking into this for months so ANY help would be perfect to hear and I can look up any troubleshooting information that could help I ve tried Odd Wi-Fi Issues -- Fluctuating Performance the old common misconception that a faulty DNS server is to blame didn t work as my current ISP Time Warner s DNS server is the best connectivity for my area I ve updated all drivers many times gone through windows settings and tried to tweak with tons of settings and adjust network consumption settings in gpedit So I m wondering what the deal is Like I said it can t be my router or ISP because my other devices work fine and work x as fine I ve tried disabling my firewall as well nothing Could my PC think my network is public and not private and be blocking a lot of traffic Do I need to allow ports for servers to be able to connect with my home network Could there possibly be a setting somewhere in Windows that is doing this to me That is not allowing my internet to go through I would really appreciate help guys I ve looked all over the internet and found lots of other people with the same issues but no one knows what the solution could be Thanks Again for ANY suggestions you can provide nbsp

A:Odd Wi-Fi Issues -- Fluctuating Performance

What are you using for WiFi Router. Are you using rental equipment from TW? Are you using all-in-one device to manage, CATV, Digital Phone, WiFi, Cable/Router/Modem. Do you have anything like that. If so has the ISP sent a hit or firmware patch to this device.

PC with the issue how the desktop connected? Via Ethernet Cable or WiFi.

So you pay for 22 mbps down but seeing only 2 mbps down on your desktop . Have you replaced the anything lately? Have you upgraded that Windows 8 PC to Windows 8.1?
Relevancy 18.49%

My laptop doesnot load when it is in hibernate or sleep. if I want to load it,I must have refresh mycomputer many times as soon as it boot up!

A:Asus N53SM wake up from sleep issues

This may be caused by a faulty video driver. Check to see if there is a update for the video driver and make sure you have applied all the Windows Updates
Relevancy 18.49%

Hi there guys

I suddenly can't connect to wifi, but the problem is solved when I use the cable, and connect my laptop directly to modem. surprisingly I checked and it seems I can connect with my tablet to wifi spot! I used recovery and system restore point, but it didn't help.

I really appreciate your help.

oh and yes in wireless mode, I can see different wifis, but when I click to connect, it tries "connecting" but fails as well.

A:Investigate router, access point issues

Do you use MS Update in Autoupdate? looking to see if you are 'current'.

get make/model of your WiFI device (see device mgr),
find the version of the existing driver, then
see if you can find a newer version; install it if found.
Relevancy 19.35%

I had previously posted this on the Virus and Malware Removal forums but after thoroughly running scans etc the problem remained therefore I was advised to post this here I m using Win Been having problems every now and then but have been able to figure them out This one is not getting resolved easily however I am Connectivity Issues having a problem accessing the internet outside of the browser that I utilize Internet works fine in Waterfox and Chrome but not Connectivity Issues in IE Plus the programs installed on my computer don t seem to be able to access the internet either I e I cannot update Malwarebytes Dropbox can t seem to connect uTorrent doesn Connectivity Issues t seem to be able to get through Connectivity Issues either When I run the Windows Network Diagnostics I m getting an error quot Windows could not automatically detect this network s proxy settings quot I have tried all possible solutions mentioned on the Microsoft forums which seem to have worked for others but nothing has worked yet The only thing I seem to have discovered is that if I run safe mode with networking the problem isn t there I was able to update Malwarebytes with no issues I am connected via WiFi previously I had no issues they just popped up a couple of days ago I have tried the netsh commands often mentioned in relation to this automatically detect proxy settings in Internet Options is most certainly enabled and has always been System File Checker has not had any success Sorry for the long post So what should I do I am considering refreshing Win even though updating Office etc again will take a massive chunk out of my limited bandwidth so I would rather use that as a last resort I ve run scans with Windows Defender and Malwarebytes Anti-Malware and come up with zilch Suggestions It s definitely not a Virus and or Malware Does anyone know any potential solutions Thanks in advance nbsp

A:Connectivity Issues

Could you please provide computer information? Make and model of computer (or) if its custom built, please provide list of parts.
Relevancy 17.63%

I was watching a tv show on nbc on my dell inspirion when I lost Wi-Fi. I checked and I had no signal and it wasn't even showing any available networks. I called dell and they ran me through a diagnostics. But once they saw my McAfee was expired and I wasn't paying extra for tech support they wouldn't help. Now it's not even showing Wi-Fi in my network connections just Ethernet. Please help

A:No Wi-Fi listed in network settings

IMO, McAffee isn't worth $$; ditch it and get WiFi running again.

THEN, choose { Avast or AVG } as your A/V product, DL & install.
Relevancy 18.06%

Hi Guys,
Recently my laptop keeps disconnecting from the wi-fi and I get an error saying unidentified network, I try to troubleshoot, it tries to reset the wireless network adapter and then the computer freezes. After I reset the laptop the problem can happen again within a couple of minutes. The driver software is fully up to date and I have no idea what else I can do. It is an Acer Aspire 5750G running Windows 7. Please help it's making my laptop almost completely unusable

A:Unidentified Network

Have you tried a wired connection does that work any better?
Relevancy 16.77%

I bought a ADSL Modem D-Link 2730U

We are connecting to the Modem via Laptop, PC, Phone,... at the same time.

I want to know how can I monitor network(Receive/Send) for each user who connected to the Modem.

Can I do such thing?
Relevancy 18.06%

I m trying to configure Surround Sound but Realtek doesn t seem to be installing and it s configuring speakers driver 5.1 Realtek Trouble Sound; issues Surround to driving me nuts I have installed the driver provided by Gigabyte for my motherboard Trouble configuring speakers to 5.1 Surround Sound; Realtek driver issues and it s not doing anything It installs asks me to restart the PC but nothing is Trouble configuring speakers to 5.1 Surround Sound; Realtek driver issues there OS is Windows -bit Gigabyte says that my motherboard supports both and Surround Sound so I don t understand why I can t configure my speakers to run it only lets me use Stereo Device manager only shows High Definition Audio Device and Control Panel doesn t show Realtek at all Realtek Audio Manager doesn t appear either it s not in the system tray icons where I would usually find it Even searching for Realtek brings up nothing other than all the drivers I have downloaded to see if they would work Link to motherboard s Realtek driver as provided by Gigabyte http www gigabyte com products product-page aspx pid dl Link to motherboard s specification http www gigabyte com products product-page aspx pid sp Image showing my device manager gt sound http gyazo com ad b bd e ae a Any ideas as to what the problem is I can t seem to find anything audio related in BIOS either nbsp
Relevancy 17.63%

My wireless is not working on my computer, just a couple months ago I reset my computer using the ISO file, now my computer will only connect to the Ethernet cable. The wireless switch is on. I see a button near the VAIO button that shows a computer with signals coming off of it, I've tried pressing it but it doesn't do anything. Computer specs: VAIO Song Laptop with 6 GB Ram and 1 TB HDD.

A:Wireless network not working

Sounds like when you reset your computer the proper wireless drivers were not re-installed. I would start looking for a solution for this. What Operating System does it have (Windows 7 / Windows 8.1/ etc.)? Have you tried to remove the Wireless drivers and re-install those? How about downloading and installing updated drivers from the VAIO website?
Relevancy 17.63%

Hi. This is my first post on this forum.

I would like to ask some help regarding a problem with my internet connection. Connecting our separate PC and my Laptop to my LAN works perfectly fine but when I use our wireless network to connect my laptop and phone, that's when the problem occurs. I tried rebooting the router (unplugging the power switch, cables and such). And I also tried rebooting my phone and laptop but nothing works. I also tried looking at the router settings and tried changing the security settings to none to see if I can connect but still cant.
I just don't know what the problem is. Can you help me?
Thank you.

A:Can connect to LAN but not on wireless network

Hey strings12. A bit more info on your equipment would be helpful.
1) What is the OS (Operating System) and Service Pack Level of your laptop, SP1,2,3 ?. rIght click on My Computer icon and select Properties
2) Are we talking about one laptop here?
3)Is your router secured and what encryption method are you using, WEP,WPA or WPA2
Relevancy 18.92%

My Gateway NV52 keyboard randomly stops typing o, p, l, ., and (.
All f a sudden it starts working as normal. Again while I am typing, the above mentioned letters stop working.

I checked for dirt stuck under the keys but nothing was there

the weirdest thing is, I tried a USB flexible keyboard instead and that was working properly for a while and that o, l, and . stopped working on that one as well.

I am confused why it's happening., and sick of filling the blanks of o, p. l with "on-screen keyboard". Please help me to figure this out.

Thanks guys, appreciated.
Relevancy 19.35%

I recently picked up some more ram. I switched out all my old ram 16gb ( 4x4gb sticks) and replaced it with 32gb (4x8gb sticks) my comp is now telling me I have 32gb but only 16gb is usable. I went into bios to see if I can change anything, but I can't change any ram settings whatsoever. I also noticed it's telling me I'm at 1333mhz when my new ram is 1866mhz. I'd like to have all 32gb usable and at 1866mhz speed. Any help would be appreciated. My mobo is asus p8h77 pro which says it can take 32gb at 2200mhz speed max.

A:Ram Issues

Which operating system do you have. It is possible the operating system is limited to 16GB. The sounds extremely familiar to the 32-bit operating system notifications when more than 4GB of memory was installed.

Windows XP is limited to 128GB.

Windows Vista Home Premium is limited to 16GB.
Windows Vista Business/Ultimate is limited to 128GB.

Windows 7 Home Premium is limited to 16GB.
Windows 7 Professional is limited to 192GB.

Windows 8 is limited to 128GB.
Windows 8 Professional is limited to 512GB.

Source -
Relevancy 18.92%

SO a friend uses this site and told me to post my issue here since I ve exhausted my options apart from actually taking my rig into a quot pro quot to get it looked at so here I am I have a Gigabyte A-D P Mobo and an old Phenom II x CPU I decided hell why not spend some cash Driving me AMD insane New CPU Issues.... FX on a New AMD FX CPU Issues.... Driving me insane new AMD FX The computer turns on no output to video fans going lights on HDD spins but sounds like its spins some rotations slows spins more slows in an endless cycle No weird noises etc I ve built computers replaced parts etc in the past with little to no issues until this day Here is what I ve done to eliminate easy replies -BIOS version was F to begin with meaning it supported FX chips Flashed it to F e anyway optimized settings etc no change in behavior -Cleared CMOS started from scratch -- no change in behavior -Yes FX chips are supported by my Mobo checked this multiple times even before buying Website for this Mobo even tells me for FX chips to work flash to the newest BIOS to ensure compatibility -- no luck -Interchanged the Phenom II and the FX in multiple ways to ensure nothings been connect wrongly heatsink is messed up etc Phenom boots the computer up like a charm every time I ve been at this for hours to no avail I ve attached a picture of some system summaries in case they would prove useful as well Any help or insight is greatly appreciated thanks for reading nbsp

A:New AMD FX CPU Issues.... Driving me insane

You may have a bad CPU.I would run it to a local computer shop and let the check it.
Relevancy 18.92%

I have an AMD Sapphire 6950. It is about 2 and one half years old. I have noticed in the past few months that when I am playing games it makes a resonating noise.

Even a simple game like League of Legends, a game with low demands, causes my card to make this noise.


* I periodically clean my case so there is no dust build up.

* Here is the exact sound: If what this guy says is true this will be my last Sapphire card.
Relevancy 18.49%

Hello...I will start from the begining .

I bought the Acer V5 and tried booting it came with boot-up Linux which means nothing to me so I made a Windows 8 bootable USB and the problems started. First I could'n find the USB and after enabling the Legacy mode it finally found it and booted from it. Turned out the partitions are GPT and as I made the USB MBR it couldn't install so I canceled which I guess was my mistake but there was no other option. After that I created the bootable USB with GPT partition scheme and tried again. Unfortunately this time I got something called GNU GRUB....wth? I googled around and found the commands required for booting - root (hd1,0), then chainloader +1 and finally boot. Then I get the famous The Boot Configuration Data for your PC is missing or contains errors with Status: 0xc000000e. Of course tried that couple of more times but still to no avail. I cannot recover or repair as Windows was never really installed, so I don't know what to do....Hopefully someone here would be able to help. Thanks in advance guys.

Relevancy 17.2%

I m been having some network problems and I m really not sure to make of any of them Networking was never my strong point but I ve done everything I m capable of to try and diagnose and fix this problem So I have comcast and use my own router The last router I had was a netgear and needed replaced because it would restart itself randomly multiple times a day and I d be without internet for about - minutes at a time Instead network wireless Help connection diagnosing problems of trying constantly to fix it I just bought a linksys C to replace it with This problem started happening a little over a month ago and it manifests is self differently every time and the symptoms just don t at up in any logical way before I go out and buy a new router I want to ask you guys Obviously I get disconnected for about a minute at a time but Help diagnosing wireless network connection problems I also have long periods of just EXTREMELY slow internet Help diagnosing wireless network connection problems speeds I m talking mbps down to less than mbps The odd part comes in when I do a speed test during one of these drops in speed The speed test says I m getting all mbps of my connection but the youtube video I ll be watching will need to buffer Pages will also load very slowly but not all of them Techspot Youtube and Outlook all take forever to load during these slow downs but others will load just fine I can t figure out if this is the router or comcast It problem seems like it is a router problem because of me getting disconnected from my router but during these slow downs I can still access my router just fine and my internet speed will be displayed correctly I only have one computer connected to wifi so I can t test other machines What do you guys make of this Also what are some tests I can run to help diagnose this problem I m at wits end about this whole thing The disconnects seems to have stopped when I changed channels in my router to channel but I m still having this severe slow down issue Also as a side note I recently upgraded to xfinity and it came with a new modem These slowdowns have been occurring on both modems which leads me to believe it is the router Here is what I ve tried doing so far gt upgrading firmware gt changing ethernet cables gt changing modems gt changing wireless cards gt adjusting channels gt using different types of security WEP MAC WPA gt reinstalling windows gt using different browsers nbsp
Relevancy 17.2%

Here again since I have the most weird problem ever which I have never seen nor heard of before. I recently upgraded the OS on a friends computer, from Vista to 7. However now I can't seem to get the onboard ethernet adapter to work, it can't be seen in device manager nor anywhere else. I have tried to reset the bios (by removing the cmos battery) and I have also checked that the network adapter is set to 'Enabled'. Also, when I connect the cable to the ethernet port no lights go on, it doesn't give any sort of hope what so ever. The cable is ok, the "modem" is ok, and everything else seems to be in order and yet it doesn't work.

Computer in question:
HP Pavilion 6530sc
Non-default GPU and added 1Gb RAM

A:Solved: Computer doesn't recognize the network adapter

Whenever you install a new OS, always take note of the model of core system hardware like GPU, chipset, and ethernet/wifi (there are a few others that aren't as important, but nice to have updated) since those are critical to your computers core functionality.

However, a quick google search of your model yielded me with your PC's system specs. Your PC contains a Realtek RTL8201N ethernet adapter. So far I am unable to find a driver from Realtek itself and the HP driver is not Realtek, but instead nVidia nForce.

So after a bit of searching, I came across this: it seems to me that you have an old chipset from nVidia. I am not completely sure, but I think you have an ION chipset. Try installing this ION chipset driver (64 bit) ==OR== this ION chipset driver (32 bit) and tell me if it works. It should include the necessary component drivers and if it works, it means you have an ION chipset like I suspected.

Here are the specifications for your PC BTW.
Relevancy 18.49%

I am running Windows 8.1. After restarts, the laptop screen would be blank, yet the computer would load. If I hooked up a 2nd monitor, it would show the desktop on that screen but laptop screen blank.

Now when I try to type on that computer (I'm currently on a different computer) the typing of the keys is all off (none of the letters actually type what they are supposed to and some open up random windows and command prompts)

I am wondering if this is a virus. Currently running Malwarebytes. I did a system restore earlier and the problem wasn't solved.

A:Blank Screen error and typing issues

Could be a virus, but could also mean the motherboard is faulty. If still in warranty, RTM.

Does the laptop have a bootable CD reader? If so, then download and make a bootdisk of a small linux (e.g. puppy linux). Booting off that will virtually prove if the motherboard is faulty or not.
Relevancy 19.35%

Hi there, my name in Mark, Over the past few days my whole internet randomly cuts off and goes back on, as if its being hit offline. I have ran through the forums and have checkout out the firewall and even done multiple virus scans and everything is coming up clear. I have a Virgin Media Superhub so its a combination modem and router. I have messed around with a few settings on the router itself. Im really struggling as I contacted my internet provider and they said they have no problem on their end. They also reset my router on a high frequency but I am still having the same issue. After having looked over multiple forums and videos and browsing through google. This issue will not resolve. It seems to occur more often when I try to run online gaming through my xbox one but it has happened a few times when the only thing that is on is my pc. I have a gaming pc and im not sure what other information you guys need. Any help would be amazing and to kick whatevers butt is annoying my internet.!

A:Internet Issues

Log into the router and find the setting MTU. It usually defaults to 1500 but that allows something called packet fragmentation. Change it to 1492 and it will stop that.
Relevancy 19.35%

So within that past month my mobile users have started having issues with our VPN. One day they can connect with no problems and then the next day they receive error 800 or error 807. There are several weird things going on. For one it doesn't just happen to certain users. The problem effects one user one day and then another user the next day. Also some can connect while others cannot. And in one case we had two users co-located at the same offsite place and neither could connect. One had error 800 and the other had 807.

Also, the users can ping the vpn server but as soon as they receive the error 800 or 807 they can no longer ping it. I tried restarting the vpn server for a user that received one of those errrors and could no longer ping the server. Once the server rebooted the user was able to ping but when he tried to connect he got the error and then was no longer able to ping it. Does anyone have any ideas for me?

The vpn server is on Server 2008 and my clients run Windows 7.
Relevancy 18.92%

So a bit of background I have been having several issues with Issues x505-q898 Qosmio with my laptop The first has been a severe overheating issue at times though I was able to help solve the problem by using a laptop cooling pad for a time Eventually though even that wasn t helping and neither was trying to clean out the heat sinks using compressed air I refuse to blow the dust back into the laptop Being the laptop was already out of warranty I disassembled the laptop down to the motherboard which I have to say thanks Toshiba for refusing to release any of Issues with Qosmio x505-q898 your service manuals I opened up the heat sinks thoroughly cleaned out the heat sinks reapplied thermal paste to both the GPU and CPU and reassembled the laptop Using Core Temp and a GPU monitor my temps are well within normal operating range However I am still having issues Now when I start my laptop up if my battery is plugged in and the AC adapter is plugged in the computer will shut down without any notice within a few minutes The lights on the LEDs on the front turn off even though its plugged in and will not restart without removing both the battery and power being removed hitting the power button a couple times and plugging it back in Now if I don t have my battery plugged in it lasts a lot longer but still shuts off periodically for no reason and has to be unplugged Issues with Qosmio x505-q898 and hit the power etc However when I left my computer plugged in and running this morning no battery it sat there for a couple hours with no problem I moved it onto my lap and it shut off I m curious to what some possible solutions to this could be It s possible I reassembled it wrong though everything seems to be working all the buttons etc but it seems like something is causing the system to crash and lock out I don t know if its software or hardware related I m considering reinstalling Windows to see if that helps but I wanted to check in first to see if anyone else has a solution without going that far nbsp

A:Issues with Qosmio x505-q898

The motherboard is probably fried from the previous severe over-heating... Did you apply just a very small amount of thermal paste to the heat-sinks? Applying too much can act as a insulator. Were there any thermal pads used? if so, replacing them with paste is not a good move
Relevancy 18.92%

So I now realized that disabling the Teredo Tunneling service/adapter in Device Manager might have been a bad mistake. Had some scary moments where I was not sure if my computer wasn't accepting the new connection, or my wireless USB adapter was dying.

I enabled 6to4 I believe, and IPv6 through a step I found here:

Though I'm noticing that the adapter for the Teredo Tunneling Service still says it won't start. (Error 10) and whenever I try to update the drivers it says they are up to date.

So I'm not sure if checking my registry (my current step I am on) will fix the Tunneling service and help stabilize my PCs connection, or if it's going to patch one thing but leave this service dangling by a thread not doing anything.

Any advice and maintenance tips would be very appreciated! Still trying to get this working so I can take some online IT courses.

A:IPv6, 6to4, and Other Networking Issues

Update: I followed the rest of the steps and updated the registry to allow IPv6. From there things seemed more stable but when I check the network status after the net going down it says IPv6 doesn't connect. When I tried troubleshooting (the auto troubleshooting function of Win7) I got a BSOD:

the other photo is blurry, but later I can try and upload a photo via photobucket for anyone to check out. As per a google search on what the BSOD is, I found it stopped 4-5 services and shut down. (really long hex codes.)

one sort of looks like: 0xFFFFF0200220550F, but the quality isn't that great, and I have no idea if that's accurate.

I'll check my dump file I copy-pasted and post later. Any advice and help would be appreciated!
Relevancy 17.63%

Sorry for that long title. Anyway, I was watching some YouTube videos when my wi-fi suddenly stopped worked. With this, I don't mean that I'm not catching signal from my router. I mean that my computer isn't receiving signal from any network. I don't know anyway to fix this, it never happened. I also won't buy a new computer. I got this on Christmas and I think that 7 months isn't that old. Also, the only tutorial I found doesn't applies to my computer (It was for a mac ). I have no idea of how to fix this and if you know, PLEASE HELP ME!!!!!! (If you are curious of how I am posting this, it works with Ethernet connection)
It's an ASUS computer with Windows 8.

A:My Computer Isn't getting signal from any Wi-Fi Network

Give the following a try and see if it helps:
Go to network sharing center - change adapter setting - click on wifi and then Diagnose this connection.

If this does not help, please let us know and we can suggest something else to try.
Relevancy 17.2%

I have a HP 650 notebook that is in ok condition with Windows 8 OS. It uses a Ralink 3290 wireless adapter for my wi-fi needs. For the past three months, my adapter has been vanishing! I look at the indicator in my bar, and it shows no device available. I open up the Network and sharing Center and select the change adapter settings, and the only thing showing is an ethernet connection that I don't use. I can sometimes get the adapter to return by using the find and fix devices option on the search menu, but sometimes even that doesn't work. I've even been getting the "This device cannot find enough free resources (code 12)" message for the Ralink PCIe from the troubleshooter. while I did see an article on this elsewhere, I had some trouble understanding it. Can anyone help me figure out why this is happening to my laptop? Thanks for any help you can provide.

A:Vanishing Network adapter and resuorce problem

You might need to update and install the laptops chipset drivers. And also try to update the driver for your wireless adapter from the manufactures site or from the HP support page.
Relevancy 18.92%

Since my friend is too stressed as well as not the type to go on places like this I am asking for him He has a AMD Athlon II P Dual-Core Ghz laptop with gigs of ram and a ATI Mobility Radeon HD Series GB the thing is Laptop issues has playing games years old Well he has been having issues with games and since I own Laptop has issues playing games a desktop I only know so much about what its really capable of Anyway he wants to play games like Warframe War thunder and not need to lower the settings all the way just to in some cases barely play Also seems he cannot run Just Laptop has issues playing games cause Now another friend I talked to briefly said sounds like something is eating his resources but again only know so much about laptops So is it his CPU video card ram or is it all the junk that might be on his system He did note that his laptop does seem to run hot and with only one fan vent it coudl be the reason for all I know he said an I quote here quot its hot enough to melt the glue of the foot pad in the corner and cause my hand to sweat quot he would love to get a desktop but sadly funds for him are quite limited nbsp

A:Laptop has issues playing games

It is quite obvious that the problem is temperature and I also think that laptop doesn't meet the recommended specification requirements of the games he wants to play.
Relevancy 16.77%

I have an internet connection that I have extended to my Brother in law's house, next door. At the moment, I basically have two LAN cables coming out of my modem/router, one going to my computer and another, extended cable, going to his computer.
However, he wants to use his spare modem/router, which has wifi capability, to allow his son to use his own computer downstair with only wifi.
Therefore, will there be any conflicts if I simply splice in a Lan cable or add a lan socket for the second modem/router (wifi location.) at the appropriate point along Lan cable 2? See diagram below.
If there is a possibility of conflict what would be an alternate wiring method?


A:Adding extra wifi (modem/router) to my already extended network

Good drawing and this will work just fine. In fact, that's what I use to get access at the far end of the house. Here's the trick;

router#1(lan slot) ---- (lan slot) router#2 with wifi​
Notice that #2 WAN slot is left empty! This places all systems on the same subnet of the router#1 {what you are doing is making router#2 act like a switch which has wifi support (y) }

* Give router# a unique LAN address (If #1 is, then make #2 This will allow each to be manage via a browser connection
* in router#2 disable DHCP. This forces #1 to be the manager of the entire network and it will handout all IP addresses
Personally, I use the MAC addresses of my devices to enable router#1 to use Address Reservation of IP address for all devices attached to #1 (ie I map the devices to the range 1.2-> 1.10)

Then set the DHCP range in #1 to 1.100-1.50
These will be used for all devices attached (wired or wifi) to #2

All systems can then use the firewall to allow or deny access for one or both halves of the network. EG: I permit access for 1-10 and 255 while denying 100-254​ALL system must allow the top-end address 255 as that is the broadcast address that is used to hand out the DHCP data.
Relevancy 24.51%

I am in an office building with 40 or so tenants. The entire building is wired to one central network (let's call it main network) controlled by SonicWall where each office has one live network drop. The main network is set up in such a way that tenants can plug in their own switches and routers if they want more network connected devices in their office. The office building has a network printer connected to main network where tenants can print to it. However, when tenants have their own routers in their office you cannot really connect to the network printer that is connected to main network. Is there something I can port, bridge or set-up where they can print to it?

A:Printing to network printer on another network

I think that as long as the tenant's router is connected to the main network they should still be able to access that printer provided that the WAN IP address of their routers is within the IP range of the main network where the Network printer is attached.
Relevancy 17.2%

Greetings my fellow technologists I have routers and internet connection and want to set up a second wireless network using the Dual 1 Internet Creation with connection Network DDWRT same internet connection for VPN purposes The routers are Router A TPLink TL-WR N non DD WRT flashed Router B Linksys E DD WRT flashed Router A is connected directly to my company s network and works fine broadcasting DDWRT Dual Network Creation with 1 Internet connection its own wireless network BENMAO BENMAO s Router A configuration settings are below LAN IP LAN MAC BC-D - - - - A WAN MAC SAME WAN IP WAN SUBNET WAN GATEWAY WAN DNS I have connected Router B to Router A via Ethernet cable Port on Router A to INTERNET port on DDWRT Router B but get no internet access on Router B using DHCP with Automatic settings I am willing to change any settings and experiment to produce connectivity on the second network BENMAOVPN but don t know what to change in the protocol settings and there is very little information on Internet DDWRT forums It seems there are multiple DHCP DNS and IP conflict issues which I don t really have a good grasp of here The DDWRT router Router B is highly customizable but I admit I don t know whether to set is as an Access Point Client Bridge Bridge Repeater or Ad Hoc but I know I do NOT want to quot cascade quot the routers into wireless network Also Router B probably needs to be set to function as a Router rather than a Gateway When I replace Router A with Router B its just plug and play everything works fine and I can actually put all my devices on a wireless VPN so setting up the wireless VPN is not the issue its just getting Router B to accept the signal from Router A So bottom line is I need to know how to set Routers A amp B to share the Internet signal from Router A to Router B and then have Router B broadcasting a DIFFERENT network Thanks for any help in advance nbsp
Relevancy 18.49%

I am on a Win 7 based computer. New apt, new internet connection. Old router.
Connects to net fine with an ethernet cable.
Connects to the wifi signal (strong signal) with password authentication BUT no internet access.
All my laptops are experiencing the same issue- so it does not appear to be related to the computer.
I then connected the ethernet cable to a Linksys E2000. Again, good signal, clear connection BUT no internet access.
What can I do??
IPCONFIG/ALL>myTCP.txt did not produce any results in DOS (why??)
Thanks in advance.....

A:Wifi connection issues- fine on ethernet


Windows IP Configuration

Host Name . . . . . . . . . . . . : subra-tablet
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . :

Ethernet adapter Bluetooth Network Connection:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Bluetooth Device (Personal Area Network)
Physical Address. . . . . . . . . : 00-26-5E-C0-40-B0
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes

Wireless LAN adapter Wireless Network Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Broadcom 802.11b/g WLAN
Physical Address. . . . . . . . . : 0C-60-76-4A-97-6C
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::7997:4b52:9da9:c46e%11(Preferred)
IPv4 Address. . . . . . . . . . . :
Subnet Mask . . . . . . . . . . . :
Lease Obtained. . . . . . . . . . : Saturday, May 03, 2014 8:22:44 AM
Lease Expires . . . . . . . . . . : Sunday, May 04, 2014 11:55:35 AM
Default Gateway . . . . . . . . . :
DHCP Server . . . . . . . . . . . :
DHCPv6 IAID . . . . . . . . . . . : 302801014
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-12-4D-54-A5-00-26-55-C9-E7-55
DNS Servers . . . . . . . . . . . :
NetBIOS over Tcpip. . . . . . . . : Enabled

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Atheros AR8132 PCI-E Fast Ethernet Controller (NDIS 6.20)
Physical Address. . . . . . . . . : 00-26-55-C9-E7-55
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::790e:7ddd:2dfe:6f71%10(Preferred)
IPv4 Address. . . . . . . . . . . :
Subnet Mask . . . . . . . . . . . :
Lease Obtained. . . . . . . . . . : Saturday, May 03, 2014 8:26:38 AM
Lease Expires . . . . . . . . . . : Sunday, May 04, 2014 11:56:07 AM
Default Gateway . . . . . . . . . :
DHCP Server . . . . . . . . . . . :
DHCPv6 IAID . . . . . . . . . . . : 335553971
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-12-4D-54-A5-00-26-55-C9-E7-55
DNS Servers . . . . . . . . . . . :
NetBIOS over Tcpip. . . . . . . . : Enabled

PPP adapter Broadband Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Broadband Connection
Physical Address. . . . . . . . . :
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
IPv4 Address. . . . . . . . . . . :
Subnet Mask . . . . . . . . . . . :
Default Gateway . . . . . . . . . :
DNS Servers . . . . . . . . . . . :
NetBIOS over Tcpip. . . . . . . . : Disabled

Tunnel adapter isatap.{F6FA6232-213B-4DE8-A4CA-916428E73370}:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter #2
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes

Tunnel adapter 6TO4 Adapter:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft 6to4 Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
IPv6 Address. . . . . . . . . . . : 2002:75ca:5ff9::75ca:5ff9(Preferred)
Default Gateway . . . . . . . . . : 2002:c058:6301::c058:6301
DNS Servers . . . . . . . . . . . : Read more
Relevancy 19.35%

Iam having framerate issues Anyone help me I will clear out the details then Here is the problem - So everything was okay for the last years suddenly from the last month wierd thing happened My computer is running all okay no problems while watching movies listening to music etc But when Lagging issues I start playing games after - mins frame rate falls for around - secs and again shoots back to normal For example if iam playing battlefield iam getting - fps Lagging issues and suddenly fps falls to - and then again shoots back to normal This happens even when am doing nothing and standing in the game This happens in EVERY game that I play What I did from my side is to made a clean install of drivers formats and went to the extent of buying a new power supply unit and yes my machine is clean and I also have fans running I got for myself an aftermarket cooer for my cpu so it isnt the temperature But the problem persisted My machine specs - AMD FX- Ghz MSI GM-P FX motherboard Corsair Value Select x GB RAM DDR Antec Neo Eco W Smps HIS RADEON GB DDR Graphics card TB WD Blue HDD GB Seagate HDD I should also mention the monitor name and the ups - AOC monitor x resolution Intex Protector UPS please help thanks nbsp
Relevancy 19.35%

So I have this laptop that had some issue with it's charger and then the charger broke completely and so I bought a new one and recently I can't turn it on my battery run out so I plugged the charger in and the little light that is suposed to go on when it's charging didn't go on and I tried a different charger and the same thing happened and now I don't know if it's a problem with my laptop or with my charger and I wanted to ask you guys here before I did anything else because I don't want to go and have my laptop repaired if I just need to buy a new charger I mean the laptop should be fine it's practically new.. help..

A:Charger issues?

When you are talking about the charging light do you mean the one on the laptop or on the charger itself (If it has one)?

If the light is not coming on on the laptop the laptop is not receiving any power, heres a couple things to check:

1: If plugged in and the laptop is on, does the battery indicator say plugged in and charging, plugged in but not charging, or just on battery?

2: Try taking our the battery while plugged in (And the laptop is off) and replace it in side to see if it starts charging.

3: Gently wiggle the connector in the laptop and make sure the plug is tight in the wall socket.
Relevancy 17.63%

Hello, totally noob to phone networks. I am going to have a US version of Galaxy S5 and order an extra battery for it on mpj. Can I use both of them on overseas carriers? Thank you for any kindly help.

A:Can I use my phone on overseas network?

The specs shown here declare

Also known as Samsung GS 5
Available as:
Samsung SM-G900F - for Europe
Samsung SM-G900I - for Asia
Samsung SM-G900K/G900L/G900S - for Korea
Samsung SM-G900M - for Vodafone
Samsung SM-G900A - for AT&T
Samsung SM-G900T - for T-Mobile
Samsung SM-G900V - for Verizon
Samsung SM-G900R4 - for US Cellular
Samsung SM-G900P - for Sprint
​General 2G Network GSM 850 / 900 / 1800 / 1900

So yes, it is compatible with EU providers. Caution however; your current provider will bill you for roaming charges. When in Europe, I always buy a local SIM card and fund it with enough credit to last the trip - - that will also give you a local phone number. If you book theater events or need to call for reservations, they will be more likely to answer the phone.
Relevancy 17.2%

I ve read all I can about this online and tried everything I ve come across Since upgrading my internet same ISP the upload on my computer not any others on the network It ranges from megabits to If I boot into linux I get but that s far from the megabits the other Slow Problem: Bizzare Infuriating Upload Network computers on the network get But the strange thing is the problem seems to affect only certain programs My browsers are affected as the internet tests I do are from the browser OBS streaming software will not upload more then megabits about k However utorrent can completely max out my upload I ve tried stopping the WMI service and Bizzare Infuriating Network Problem: Slow Upload I have no traffic shaping software installed Here are my specs Operating System Windows Pro -bit CPU Intel Core i K GHz C Haswell nm Technology RAM GB Dual-Channel DDR MHz - - - Motherboard MSI Z -GD GAMING MS- SOCKET C Graphics SyncMaster x Hz LG TV x Hz MB NVIDIA GeForce GTX Gigabyte C Storage GB Samsung SSD EVO GB SSD C GB SanDisk SDSSDHP G SSD C GB TOSHIBA DT ACA SATA C GB Seagate Bizzare Infuriating Network Problem: Slow Upload ST DL - VT SATA C Optical Drives PIONEER DVD-RW DVR- L Audio ASUS Xonar DGX Audio Device Various Network info You are connected to the internet Connected through Killer e Gigabit Ethernet Controller NDIS IP Address Subnet mask Gateway server Preferred DNS server DHCP Enabled DHCP server External IP Address Adapter Type Ethernet NetBIOS over TCP IP Enabled via DHCP NETBIOS Node Type Hybrid node Link Speed Bps Computer Name NetBIOS Name CALVINS-PC DNS Name Calvins-PC Membership Part of workgroup Workgroup WORKGROUP Remote Desktop Disabled Console State Active Domain Calvins-PC WinInet Info LAN Connection Local system uses a local area network to connect to the Internet Local system has RAS to connect to the Internet Wi-Fi Info Wi-Fi not enabled WinHTTPInfo WinHTTPSessionProxyType No proxy Session Proxy Session Proxy Bypass Connect Retries Connect Timeout ms HTTP Version HTTP Max Connects Per Servers INFINITE Max Connects Per Servers INFINITE Max HTTP automatic redirects Max HTTP status continue Send Timeout ms IEProxy Auto Detect Yes IEProxy Auto Config IEProxy IEProxy Bypass Default Proxy Config Access Type No proxy Default Config Proxy Default Config Proxy Bypass Sharing and Discovery Network Discovery Enabled File and Printer Sharing Enabled File and printer sharing service Enabled Simple File Sharing Enabled Administrative Shares Enabled Network access Sharing and security model for local accounts Classic - local users authenticate as themselves Adapters List Killer e Gigabit Ethernet Controller NDIS Connection-specific DNS Suffix Home Connection Name Ethernet NetBIOS over TCPIP Yes DHCP enabled Yes MAC Address D - D- E-F - B- IP Address Subnet mask Gateway server DHCP DNS Server Network Shares Misc D Misc Finished Torrents D Downloads Finished Torrents Games D Games Games E Games Torrents E Downloads Torrents Video D Video Video E Video Current TCP Connections C Program Files x Google Chrome Application chrome exe C Program Files x NVIDIA Corporation Update Core NvBackend exe C Program Files Box Sync BoxSync exe C Program Files Hola app hola exe C Users Calvin AppData Roaming uTorrent uTorrent exe C Windows Explorer EXE G Program Files x Nightly firefox exe G Program Files x Razer Razer Game Booster main exe G Program Files x Samsung Magician Samsung Magician exe G Steam Steam exe hola svc exe hola updater exe KillerService exe lsass exe NvNetworkService exe nvstreamsvc exe services exe svchost exe svchost exe svchost exe System Process System Process wininit exe nbsp

A:Bizzare Infuriating Network Problem: Slow Upload

I figured it out, the Killer NIC on my Z87GD65 mobo was not compatible with NetLimiter. Uninstalling it fixed the problem
Relevancy 18.49%

I recently bought a Dell Precision T and man it is a workhorse compared to what I have been using It has two quad core GHz processors and currently MB of RAM which I intend to upgrade to MB It has two separate GB hard drives and is running Windows Ultimate The only problem is that the display doesn t seem to be anywhere as good as my old computer is and I just bought a cheap no name Is Card Issues- outdated-What Video mine to get GB DDR card for it My new Dell has a nvidia quadro fx SD which I think has only MB of ram and the only thing it has going for it is that it has dual DVI connections for dual monitors only up to quot I thought with all the video cards out today that I could find something reasonable to replace this with and still have the option of dual monitors but I would prefer not to be limited to only quot Video Card Issues- Is mine outdated-What to get monitors I think this video card is just too old but I need advice because anyone at a store would just try to sell me one of the most expensive ones that I cannot really afford I have plenty of room for video cards and can even Video Card Issues- Is mine outdated-What to get run a dual space taking one of either type slot Please help advise me You can even look up the specs on my computer from the info above It has an watt power supply so I know that is not a problem As a matter of fact I wanted to also look into some more cooling options to keep it cool The case is quot high and quot deep and quot wide It is a monster to me but that is what I wanted I wanted one I could upgrade the way I want to I get mixed up on the card slot names but I know it has of the dual X Gen Graphic Slots I think those are the long ones with the little blue catch at the end to help hold the card and it has about or more other slots Only one of the X is being used by the old card which I plan to replace and the other slots are empty As always Thanks a million for the advice and help you guys give on here I hope someone has a decent solution for me The only reason I didn t want to be limited to a quot inch monitor is because I watch a lot of streaming video on the internet and I thought I would get one of those large quot or quot televisions to use but if I can t it s cool just explain it to me if you can please Thanks again for any responses nbsp

A:Video Card Issues- Is mine outdated-What to get

The size of a monitor does not matter to a video card, you can hook up a 60inch TV and it wont make a difference in performance to the machine over a similarly specked 30inch. What matters is the resolution, the higher you go (720->1080->1600->etc) the more demanding it is on your video card. Now in your case that Quadro card is Extremely Low end in this day and age which means its probably struggling to do anything even at 720p resolution. Now while this is a workstation machine, im inclined to ask what else you maybe doing besides watching/streaming HD content. If that is all you want to do, my suggestion would be to grab one of these:

Its and AMD R7 250, it has a DVI, HDMI, and a VGA on it so you can hook up 2 monitors (I would suggest 1 HDMI and 1 DVI) and it will keep up with your needs just fine. If you intend to do more with your machine than that or want a video card a little bit higher up for possible other tasks, try grabbing one of these:

Its an AMD R7 260X which is a significant step up for 50 more dollars. But it contains display port and more outputs in general so you can hook up lots of different monitors (Up to 6) on it.

Just my two cents, if you really want a workstation card like a quadro or firepro, let us know what your using it for so we can find a good one for you instead.
Relevancy 17.2%

Hello, I'm new here. I'm trying to fix my sons Asus laptop. it won't connect wirelessly but will connect via ethernet cable. device manager has exclamation point beside network controller. I cannot download drivers for it. can you help?

A:Asus X53E network controller issue/no wireless

"I cannot download drivers for it"... Why? Can you get the driver from here:
If the driver won't install, the Wifi card may be bad... Something that doesn't happen very often
Relevancy 19.35%

Hello. I recently had a mother board go dead on me. I purchased the exact same motherboard I had. the new board is same model, brand and all that, but the overclocking on it is considerably worse for some reason. Any suggestions as to why this might be? as an example my rig is

fx 4100 quad core
radeon 6670 gpu
kingston hyperx 1866 8 gigs ram
ocz vertex 3 ssd
500 gb western digital
asrock 990fx extreme3
corsair 600w gs600

The first 990fx was running stable for quite some time at 4.4 ghz with 1.385 vcore or something close to that. I had pushed up as far as 4.8 stable and decided I didn't like the temps it was running so I backed it back down a bit. This new board cannot hit 4.4 no matter how high I put the vcore. what can I do to figure out what is causing this? thanks.

A:Motherboard issues

The answer is in the question - you had a fairly new board die, an Asrock (brand not known for reliability), so you went out and bought another one of the same model as the one that failed, presumably to avoid re-installing Windows due to major hardware change. I don't understand why you'd buy the same model after an early failure, unless you know what caused it (dropped screwdriver, shorted PSU, etc). I would have realized that I took a chance on a cheap brand, rolled the dice and lost, and replaced it with another brand, one of the top 3 (Asus, Gigabyte, MSI). Obviously you were on a tight budget for this build, and I'm impressed that you went with an SSD and fast RAM. If overclocking is important to you (as it should be), return the Extreme3 and get an Asus board for $150 or a Gigabyte for $125. If you get another Extreme3, maybe it will OC good but have other issues, and maybe it will fail again. All mobos are so complicated that designing a reliable one is very difficult, and cheap components almost guarantee failure at some point.
Relevancy 17.2%

We have a problem with the connection to our server. The server disconnects randomly from minutes to hours all day. I am at a remote location and connect via logmein to a local pc at the servers physical location to remotely control and connect to the server. A month or so ago the connection would drop every few minutes. The staff at that location replaced the switch and had the ISP tech check out the router. No problems were found. I think it is a problem with the server itself but don't know what it could be. Typically I can go through the login process and reconnect. I'm sorry I can't be more specific about the equipment since it is 40 miles away. Any suggestions on troubleshooting? Remotely?
Clearly I'm not a network guy.
Thanks for any help or direction

A:Network connection to server disconnects constantly

The usual suspects are:

(for DSL connections only) missing or faulty line filters
need to update the router/modem firmware at your end
packet reassembly overflow(a)
(a) very techie, but the solution is easy; see this description
Relevancy 17.63%

When I am accessing wifi network I get dns failed error message. what is the problem? pls help

A:DNS failed error in WiFi network

Can you connect using a wired connection?
Get a command prompt and enter
ipconfig /all >myTCP.txt​then open that file, copy the contents and paste into your follow-up
Relevancy 12.47%

As the title suggests- I have issues.. Just moved out to the rural countryside and had to get a satelite setup for internet access. We got the 30GB package and after a WEEK, they claimed we hit our limit. Ok so back in city life we had a 25 Gig package on broadband and never had an issue with three of us on it. I downoaded the Networx bandwidth tracking package and while good it has issues.. so heres my Question: What software package OR hardware device is available out there to track usage for a family of three wireless Inspirons and a lan cabled IBM Business computer? I can't install any software on the business computer so I set mine up to monitor router traffic hoping to capture all traffic - but this only works if my computer is on. Is there an easier way? As I'm not a techie please use very simple words and suggestions. Thanks

A:Bandwidth, bandwidth and more bandwidth issues...

Having 30GB a month sounds pretty good to me, my parents live in a rural area and have 5! a month limit. They are through Dish, there aren't a whole lot of sat internet providers in the US, and they are all pretty similar in usages and charges from what I recall. Dish has a way to track your usage on their website, I assume HughesNet, WildBlue, whatever things are calling themselves now (essentially in the US at least, you are going through something that is either those, or is owned by those). So, you should be able to watch your usage in somewhat real time on their website.

If you live outside of the US or have some provider I am unaware of, I would be they also have a website interface that will let you track. The only downside to this is that you have to take their word for your usage, but that is pretty easily determined if you can control your devices for a short period of time and do a download test (grab a linux ISO at 650 megs). It should match up, if not, then you are getting scammed by your ISP and you should google to see if anyone else is having the same issues, this is HIGHLY unlikely though.

Bottom line, you are overthinking it, just use your ISPs counter on their website, if you think their's is wrong, post back with some details on why.
Relevancy 18.92%

Sometimes my laptop would disconnect from the internet even though its working.
I've tried using the troubleshooter but it would say that the problem is fixed but then it would happen again in the next 10 min or so.
Occasionally while I'm playing a game, my ping would rise up to 400 or more.

A:Laptop having connection issues

Which connection? Wifi or wired? If it's wifi, then who knows what the problem is - your router and/or distance to it most likely.
Relevancy 17.2%

Hello. I am a complete newbie to server administration. At my current job, I have been tasked with setting up a deployment server. The server is a Windows 2008 server and is not connected to the Internet. The server is a domain controller on its own domain (different from the main domain my job uses). How would I connect this server to the Internet without disrupting other users on the network? By disrupting, I mean connecting to my server instead of the main server for DNS and DHCP. The server has Active Directory Domain Services, DNS, DHCP, and WDS roles set-up.
Relevancy 17.2%

Recently my network storage device has stopped me from accessing folders with the exception of music. All my pictures for the last 11 years are on it and not backed up anywhere else. Cannot find manual and have done reset but cannot remember URL to setup or admin username and password. Doesn't seem to be online and Edge is giving me no help whatsoever.

A:Edge DiskGo 3.5" network harddrive

Ouch if this is a NAS Device or has an IP you can use an app called FIng for your mobile device to find its ip so you can put it in the browser and get to the gui site. If you cant try fing you can use angry ip scanner for winwdows to find its ip.

If you want to try and recover files I would try recuva to obtain any data that has been lost. I am not sure if it is lost or just changed in the mapping.

As most guys will tell you here its very good idea to have three forms of back up. Local, external and online. If you don t know how to use fing or any of the software I duscusses please let me know. I will have links to the downloads below. Goodluck.
For Fing just type in Fing in either google play or Itunes.
For Recuva:
Relevancy 18.92%

I m sorry if this is in the wrong 3 laptop on Many with issues month place - I d really really appreciate some help though I have a month old Toshiba Satellite A couple of weeks ago after Many issues with 3 month on laptop a Windows Update it went a bit wonky saying there were corrupt files I ran sfc scannow it found some things but couldn t fix them I did chkdsk and sfc a couple more times after which it said all was okay but the Windows Update Troubleshooter thing still said there were corrupt files and I was getting the odd error Many issues with 3 month on laptop and a few warnings in event viewer Sick of fiddling with the thing I did system refresh - after which all seemed okay for a few days during which I chose to not look at event viewer - partly cause I was getting too stressed with it and partly in the hopes that after the refresh then having to install about updates I d give it some time Many issues with 3 month on laptop to calm down or something Yesterday - I noticed everything was running rather slow so I rebooted the machine then everything was running extremely slowly I checked task manager and it said disk use and RAM use although nothing was running save a webpage and task manager I was advised that the Skype app which came pre-installed on the machine has never had issues before and I have used all of once was causing some problems so I uninstalled that I ran Avast anti virus scan nothing found I tried to run sfc scan but it said quot another servicing or repair operation is currently running Wait for this to finish then run sfc again quot Not a clue what that might have been I tried a few times wouldn t run At this point I gave in for the night Today I have ran sfc scan - nothing found Usage for disk RAM and CPU are still high although varying a lot Disk was even down at for a while earlier I notice that Google Chrome is in the Task Manager times I don t think this is normal I have one window open only One of the listings is for the Chrome app which I am not using Avast is in there twice once with the logo and once without I don t know if that means anything About times so far today my cursor has frozen for a few seconds There are a few errors and warnings in event viewer I have a copy of this on skydrive and can put a link on here if anyone wants to see it In brief the warnings are ESENT which viewer says is likely due to hardware problem yay ESENT again says probably hardware Kernel-PnP x DNS Client Events The errors are Service Control Manager terminated unexpectedly Application Error TrustedInstaller exe x Application Hang for wwahost exe and LiveComm exe x DistributedCOM x Apps Those are all the ones since yesterday morning Sorry if that s too much info or not enough I d be very grateful for any help - a new laptop shouldn t be this much hassle I phoned the Toshiba number as it s under warranty only for the guy to tell me he would have advised me to do anti virus scan sfc scan then check task manager - all of which I d already done and if I wanted more in-depth advice I could sign up for extended warranty for a one-off easy payment of just Swines Thank you very very much in advance I can t tell you how grateful I will be if this can get sorted If restore to factory settings thing will magically fix everything then just give me the word and I ll do it I have backed up my files and any apps or programmes installed I don t care enough about to warrant putting up with these issues Though the OS came preinstalled on the laptop so I don t have it on disc don t know if I might need it if I do a reset The OS is Windows nbsp

A:Many issues with 3 month on laptop

I would suggest that you restore the laptop to it's "like new" settings and re-apply all the Windows updates
Relevancy 17.63%

Hi I m having a problem that I gather is fairly common with Windows machines but I haven t been able to find the same case in other threads nor a workable solution among similar cases I have two Windows computers the main laptop on Win and a hybrid tablet on Win I would like drive Win8.1 Trying connect to network to a for both devices to be able to access each other via my home network So for both devices I ve set the network settings to home private I turned on file sharing and discovery and even joined both devices to the same homegroup The end result is that my Win tablet can access my Win laptop both through the homegroup and through direct network access The problem is that my Win laptop cannot do either of those with regard to the tablet in all Trying to connect to a Win8.1 network drive cases I get the network error message that I cannot access the location and should check it for spelling To try to solve this issue I have attempted -Turning off the Windows firewall on my Win tablet -Looking around to see if I could find my Win tablet to unwittingly belong to some sort of domain have not been able to figure that out The odd thing is that I also tried to test out the network by setting up iTunes on both devices and setting them to share their music libraries via home share and sure enough both devices could access each other s libraries Similarly I was able to access my tablet from my Win laptop through a Remote Assistance invitation Would very much appreciate any advice I can get here Thanks in advance nbsp

A:Trying to connect to a Win8.1 network drive

Which Windows 8.1 tablet is this Pro or RT? RT your can't not x86 or x64. Pro you can. Disable Homegroup. Use Workgroup and call it something other than Workgroup like: DANET for example
So do this on laptop and tablet. On laptop make sure the folder is shared out to you the admin or your name example Dan.

So you should have local account on your system called Dan with admin rights. Back on the tablet side you need to create a local account. Did you setup Microsoft account so your login with that account only. You need to create a local account and start using that. It can be done to access the Microsoft account while being on local account while your at home.

If away from home then sign on to Microsoft account to access the cloud features. Or still use the local account and have Microsoft account to access store and skydrive (aka onedrive).
Relevancy 18.92%

I have three Macbook Pros and two PCs at home. When the PCs are connected to the WiFi the internet slows down for just the MacBooks. When the Macbooks are on and not the PCs they run at fast speed. Is there a way to limit the bandwidth for each device, or would there be something else to do to fix the problem? I need help!

A:Wireless Connection Issues

QoS settings in the router webpage.
Relevancy 19.35%

I'm trying to set up my Roku by connecting it to my desktop and using ICS (to let the Roku make use of the much better signal that the desktop gets).

This works fine, the Roku connects and can stream easily. Unfortunately, the desktop now seems to have something wrong with it's connection, things like Steam and Teamspeak are fine and stay working, but I can't load any webpages, ping or tracert from cmd.

I figure something might be wrong with the DNS, but resetting all the different components hasn't helped.

Does anyone have any ideas?

Relevancy 17.2%

Hello Everyone !
Right now I am using a broadband connection as my Internet connection and I have a dsl modem which is wi-fi capable. Two of my frnds share the same Internet connection through wi-fi. The problem is whenever any of us watching YouTube videos or downloading something, the whole speed is consumed by that particular computer. I know that many new modems have the capability to limit the bandwidth usage these days but mine is an older one. So I was wondering if there is any way I can limit the bandwidth for each computer.
Thanks !

A:How to limit the bandwidth for each computer on a wireless network?

You have to have a modem you can log into an has that type of feature. If you are wired into the network, you should be able to limit the wireless bandwidth and keep your wired bandwidth up. Normally go into the modem, go to setting and wireless setting to limit it.
Relevancy 18.92%

I have been playing battlefield 4 and I keep getting disconnected from servers due to a large ammount of packets being used I tested this myself though there system performance tool in bf4 what causes packet loss and how can I fix this

A:Battlefield 4 connection issues

Make sure you have the latest patches for BF4, they will make a HUGE difference in how BF4 runs on the PC.
Relevancy 15.48%

Our ISP recently updated their hard ware to work with the Sprint network Note our ISP is not Sprint but the local phone company Our Hardware Internet DSL highest speed available Modem Comtrend ISP provides Router Belkin N Computer yr old Dell running XP - service pac - wired connection Kindle Fire first edition no HD etc - wireless connection Xbox - wireless connection Issues Xbox - went from constantly bumped from Xbox Live game by losing internet connection to not being able to enter a game at all Kindle - went from occasional quot network error message during online tasks to having to restart download multiple times or refresh page for most any or all online tasks Computer - have to click refresh to get most any page to load after the home page What we ve tried so far I have recently cleared the cache on both the computer and Kindle XBox s new security measures have been met My questions Do any or all multiple issues devices Multiple over of these issues seem to be related Is there a piece of equipment or something we may be missing to make all of these things work I am a networking novice Who should I call to get these issues corrected my ISP or a tech service Note if I start with the ISP and they do not find an issue I have to pay for the call nbsp

A:Multiple issues over multiple devices

First. You should try to NOT use a wireless connection for any type of gaming: PC, Mac, Console, etc. If you can hard wire the xbox you'll be waaay better off than using wireless.

Now... Yes, the issues could be related - there maybe an issue with the Belkin N router. I'd try to first reset the Belkin router to default settings, check on manufacturer website for instructions how, most routers you can press a "reset" button w/ a paperclip or ball point pen. Reconfigure the Belkin router, recreate the wireless network and see how everything works. If you are still having issues, humor me and connect the Dell directly to the DSL modem, bypassing Belkin router. See if you still have connection issues, if you do then it could be the DSL modem that is the problem and call your ISP to replace. If you don't have same issues then it's most likely an issue with the Belkin router. Replace it. Don't buy the dirt cheapest router at the store, but you most likely don't need the most expensive one either. Find a good middle ground router, ask sales associate to assist you accordingly.

Post back, Hope this helps!!
Relevancy 19.35%

My roommate and I use our LAN to network games. It took us a while to set up, but we haven't had any problems for about a year. Today, however, I turned off the wireless to my Mac, and when I turned it back on, our LAN network would no longer work. I think what happened is that the dynamic IP reset to slot 4 ( I tried resetting our port-forwarding to slot 4, with no luck. I also tried giving the Mac a static IP (back to slot 2 like it used to be), but the router is still registering it as connecting via slot 4 with a dynamic address, even after restarting the computer. Now I've managed to get it to the point where we can connect manually by entering a port number every time, but I'm hoping I can set my IP back to slot 2 ( so it will do this manually. Does anyone know whats going on?

A:LAN Issues

Ok, sooo many variables in your question... Answer these questions and I think we can help you further:

What is the make/model of your router?
What is the router's ip addres?? ex:
How many computers are connecting to this LAN?
Are the computers all Macs or are some PCs?? What versions of windows or OS X are each running?
Are the computers connecting via wire or wireless?
Is the router configured for DHCP (dynamic)?
Have you already configured ports to be forwarded to certain ip addresses? If so, what ports to what addresses?
You keep referring to "slots", I'm guessing you mean the port of the router, is this correct?
What games are you playing? ex: battelfield, minecraft, etc.

Answer these questions thoroughly and I think we can help you out. Have a good day!!
Relevancy 18.06%

Hi there Tech Forum thanks in advance for your help - I have a question about a LAN and stuff There is a modem and a wireless router with LAN ports In one of them there is conected also a switch Network LAN Question with LAN ports - Some weird things have been going on I always get a wireless connection so LAN Network Question no problem there Issues appear with the wired network On one hand I had many times an unidentified network a x x x ip and no LAN Network Question network Nothing changed in configuration on my box or the router and got to connect at MB s while if connected through wi fi I got LAN Network Question more than MB s From a moment on again unidentified network and no signal in the adapter a yellow light would blink quick So now after touching the cable and a little bit of despair not driven to the computer by the way I have a full conection by lan and by wi fi both at a good speed AND weird for me a green light on and the same yellow blinking - So main questions are - What does the green light ON not blinking means - Could there be a difference due to the cable manipulation - Is there a gost inside my router D Thanks a bunch to all of you I try my best to understand computers so now I am happy with the connection but curious on the rest - Regards nbsp

A:LAN Network Question

How new are these devices? Are you using new 'patch' cables? Is DHCP running on only one of the devices? Seems weird that "touching the cable" caused a change.

1. The LEDs differ, but usually one signifies a connection [on/off] and the second signifies activity [blinking]
Relevancy 19.35%

I wanna make sure I done all steps before sending these 2 new sticks of memory back to newegg because there defective.

2 new sticks match the old stick. G.Skill, F1-3200PHU2-2GBNS, DDR-400, CL2.5-3-3-6 2.5 ~ 2.75v, PC3200 1Gx2

The 2 old sticks works in all 4 memory slots. New memory sticks does not.

When the PC completely boots up I get lines on the monitor and freezes PC up after done booting everything. I reboot PC then get check sum error on the black boot up screen with F1 to continue or F2 enter setup.

Acer Aspire T160 desktop

A:New Memory Issues

That's a bit too old for me to be confident giving suggestions, sorry.
Relevancy 17.2%

A colleague at work would like to set up either a SHN or a SBN. What is the best way to go about this? Would it be best to be safe to be cloud based? What equipment is needed etc...?

This will take some discussing, so please ask any questions you need. The intention would be for two/three people to access the information on the network initially. A printer will be shared on the network, allowing scan to email. Laptops would be used to access the network from external sites, this is why I'm thinking of going the cloud based route, so they can log on and access the server from anywhere in the world...

Any help/guidance is appreciated.
Thank You!

A:Setting up a small home/business network

Yes, you can consider the Cloud as a solution for access, BUT . . .
it also brings with it issues like:

You should start reading about these issues before committing to this solution.

One alternative would be a NAS device connected to your router. Putting your modem, router and NAS on a UPS power system would allow (with proper configuration) external access and you have total control, of all of the issues above.
Relevancy 18.06%

I woke up this morning and my laptop is having trouble connecting to the internet However internet worked on other laptops and devices so it must be the laptpo s problems I Network Unidentified looked up the problem and I eventually get to a point where I figure out I need a new ip After typing ipconfig renew it says Windows IP Configuration No operation can be performed on Wireless Network Connection while it has its media disconnected An error occurred while renewing interface Wireless Network Connection Unidentified Network The sup port for the specified socket type does not exist in this address family No operation can be performed on Bluetooth Network Connection while it has its m edia disconnected No operation can be performed on Local Area Connection while it has its media di sconnected I don t know what to do now Please help Windows IP Configuration Host Name Username Primary Dns Suffix Node Type Hybrid IP Routing Enabled No WINS Proxy Enabled No Wireless LAN adapter Wireless Network Connection Media State Media disconnected Connection-specific DNS Suffix Description Microsoft Virtual WiFi Miniport Adapter Physical Address E - -FE- A-B - DHCP Enabled Yes Autoconfiguration Enabled Yes Wireless LAN adapter Wireless Network Connection Connection-specific DNS Suffix Description Atheros AR b g n WiFi Adapter Physical Address C - -FE- A-B - DHCP Enabled Yes Autoconfiguration Enabled Yes Link-local IPv Address fe d ca Preferred Autoconfiguration IPv Address Preferred Subnet Mask Default Unidentified Network Gateway DHCPv IAID DHCPv Client DUID - - - - - F-BD-FD- - A-B - F- -BC DNS Servers fec ffff fec ffff fec ffff NetBIOS over Tcpip Enabled Ethernet adapter Bluetooth Network Connection Media State Media disconnected Connection-specific DNS Suffix Description Bluetooth Device Personal Area Network Physical Address - - - -A -DA DHCP Enabled Yes Autoconfiguration Enabled Yes Ethernet adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description Realtek PCIe FE Family Controller Physical Address - A-B - F- -BC DHCP Enabled Yes Autoconfiguration Enabled Yes Tunnel adapter isatap BEE - C- F F- -D B D BD Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter TO Adapter Media State Media disconnected Connection-specific DNS Suffix Description Microsoft to Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled YesAnd here s the ipconfig all just in case nbsp

A:Unidentified Network

Wireless? Your laptop isn't getting an IP address is the cause of your issues. Find out of the router has enough allocation.
Relevancy 18.92%

Hi so I ve been having issues with the sound on my laptop for a while now I had the red x my on with sound laptop Issues next to my speaker icon for a few months and I assumed this was because my sound card was done and I needed a new one I finally got around to messing with it today and Issues with sound on my laptop I found that my drivers were out of date I updated them and restarted my computer The red x was gone but I m still not getting sound out of my laptop speakers I ve messed with the sliders disabled and re-enabled the device even tried plugging in external speakers to play through there I ve noticed that when I do adjust the volume on the slider it responds as if the laptop IS making sound I just can t hear it Also when I plug my laptop into HDMI the sound works fine Anyone have any idea what my issue could be Thanks in advance I have a Toshiba Satellite P if that helps nbsp

A:Issues with sound on my laptop

Hey sethr266, this is probably a lame way to go but it has helped myself in these weird situations. Have you tried Microsoft fix it? If not Google Microsoft fix it audio problems. It may help. Also you can try uninstalling the audio driver in device manager for the onboard audio driver but keep the driver file when it ask. Restart the laptop and let it reinstall itself.
Relevancy 18.92%

I have been having an issue for about a week now with my internet 7 Windows connectivity with Issues internet on connection on my PC I could surf the net for hours or Issues with internet connectivity on Windows 7 post in forums for an unlimited amount of time with no connection issues But as soon as I try to play an online game or stream a video song or even download something I seem to get frequent disconnects It s only temporary for example I could log into WoW and for about - seconds everything is fine Then I see a bit of lag and I get disconnected but I can log back in immediately My disconnect doesn t seem to last longer than second If I am buffering a video on YouTube it sometimes stops halfway through and I need to reload the page to get it to start buffering again I did a full clean on my PC with some help from others on this website and after running some programs Broni mentioned that he doesn t see anything malicious on my computer What else could be causing Issues with internet connectivity on Windows 7 these issues Please help nbsp

A:Issues with internet connectivity on Windows 7

Specs on the PC?
What OS is in there?
How much RAM?
How fast is the CPU?
Size of HDD?
Network Rated Speed on there?
Desktop or Laptop?
How old is the PC?
Your Internet Service Speed for download and upload?
What do you have? Cable or DSL?
What has changed prior to this issue?
Also see below:

System Issues
When last did you check the system out for issues?
Clear the Cache/History for the Brower
HDD Defrag
Scan for pest (Malware) on the HD?
How you ever clean out this box?
Check the vents make sure there are no dust or anything blocking the vents / fans?

Router. When was the last time you did a power cycle, means you turn it on and off.
Modem the same as above.

If on Windows PC if you can get to the Dos Prompt right click on that icon then select Run as Admin.
ipconfig /flushdns
nbtstat -R
netsh int reset all
netsh int ip reset
netsh winsock reset

reboot your PC
Relevancy 19.35%

Hi guys, been looking at this site for a while now and ive got a problem of my own so here goes.

Seem to be getting a random error regarding Direct X ( I think ) and my 780

Basically it will sometimes hang mid game for 5 seconds and then recover itself and let me carry on playing.

I get this error while playing BF4

Ive Reinstalled Windows this morning to see if the error persists and it does. Ive got all the latest drivers as well.

Thanks for any help.

A:Gtx 780 Issues

Doing a Google Search of the problem, and you are not the only one that is having this problem. From what I've read, somehow the DirectX files that were included with BF4 were corrupted. I could not find a solution so far, but will keep searching. I might suggest uninstalling DirectX, download it directly from the website and then install it from the download. It might work, or it might not work, but it is worth a try.
Relevancy 17.63%

Hi I What to fail my workgroup causes network have four pc s connected through a GX-D ASUS switch which is now a few years old Two of the pc s have just been upgraded to windows the other two are on windows Also into the switch goes my BT broadband router and my network hp printer n Suddenly I am losing the complete network during normal use Instead of having green lights on my switch one of them goes amber and another has no light on at all If I unplug the switch from the power and then power back up all the What causes my network workgroup to fail lights go orange What causes my network workgroup to fail and then turn to green and the network comes back on This has never happened before until today and it has happened twice really frustrating I am not very techy and think the switch has became faulty Should I go buy a new switch or might it be something else Need it explaining in layman terms please as I don t have a clue Thanks for your help nbsp

A:What causes my network workgroup to fail

Hi Shelley123. If your router has at least 4 Ethernet ports at the rear, there is no need for a switch as you have 4 pc's. If your "router" only has 1 Ethernet port, what you have is a modem. Normally, your Internet signal comes in and goes to a modem first, and if you have more than 1 pc or devices that need wireless connectivity,you would connect a wireless router to that single modem port and connect your 4 pc's to the 4 ports found on most routers.If you had at least 5 devices that need to be connected by Ethernet cable, you would use a switch which you would connect to one of your router's ports, then connect the fourth pc and any other Ethernet device to one of the 4 or more ports on the switch. Are you sure you are using a switch and not a hub? Could you tell us what other hardware you have in your network besides your 4 pc's which you connect by Ethernet cable?
Relevancy 17.2%

If I'm able to, how would I go about running a network hub from an existing port on the router?

I.E. Modem->Router->PCs/Hub->TV/PC

In theory I'm trying to run a wired connection to my room and have the ability to have my PC/TV and any other devices connected to the network physically, my wireless strength isn't exactly good and it's very inconsistent at best when it comes to my internet speeds makes it a bit harder to watch Netflix/Play games.

Any insight would be wonderful!

A:Question about a home network using a Linksys WRT54GS2

Modem > Router >

Then use a LAN port on the router to connect to a LAN port on the hub.
Relevancy 17.63%

Networked for years in XP machines.

I read help files how to but, could not make it work.

My w8 win wxplorer list shows under Network the VISTA LAPTOP. When I click on it it asks for user name/password but, what name & password?.

I naver had any name/password for my networks.

Any body knows what does it refere to?

A:Failed to network w8, xp & vista

Hey nichos. Was a name and password used when this Win8 system was first set-up. When I first unpacked a WIN8 laptop, it threw me for a loop as it requires a username and password to unlock it.
Relevancy 17.63%

I am stuck Also I apologize in advance if this is not in the right forum I am trying to work on a friend s Windows desktop PC Dell Inspiron at my house but I cannot connect to my home network or the internet to download network Cannot or to PC connect internet malware scanners removal tools updates to MBAM etc First I was trying with a wireless adapter that it known to be good The network sharing center would say it was connected to the network but there was no internet connection Then I tried plugging in an Ethernet cable The network sharing center just kept saying quot searching for network quot but never would connect I tried disabling then re-enabling the network adaptor and I reinstalled the driver Networking is not my strong suit so is there some setting I may be overlooking It appears the PC on which I am working is already part of a homegroup do I need to leave that group then try to join my existing one set up through my own Win amp PC I don t care about sharing files across Cannot connect PC to network or internet the network in fact I prefer not to in case this thing really is infected I just want internet access on this machine Could some sort of malware be blocking access I sort of doubt this since it was working fine at their home before they brought it to me I could not find any router settings or firewall entries that appeared to be blocking access ZyXEL PK Z DSL modem router provided by CenturyLink Do I need to call my ISP tomorrow Thanks again this community has always been helpful to me nbsp

A:Cannot connect PC to network or internet

Make sure the adaptor isn't set to 'share connection'.

Try using a static IP.
Relevancy 18.49%

Hello there I am still having issues with my internet my last thread http www techspot com community t uter-on-the-same-network loss Ping and games packet on in off issues and post- When im in games its most noticeable in league of legends I Ping issues in games and on and off packet loss get lag where ill be clicking to move somewhere and it doesnt register for a few seconds It lags in Ping issues in games and on and off packet loss all my other games too and I disconnect in alot o f them I fear it is packet loss When I check for packet loss on teamspeak those top numbers are all other times the first and rd are and other times there all similar numbers like u see in the picture Ive done ping tests on pingtest net and sometimes I get sometimes I get and sometimes I get like On and off packet loss I didnt think it was possible what could be the problem Faulty ethernet bad router because I havent a clue Here is a pathping to google theres and a ics netlyzr test these are from my computer ill do some of other computers in my household too I have removed some ip address for obvious reasons this one was took about mins after the st one http n netalyzr icsi berkeley edu summary id ea d- - ee -ae - cb -b e hes a second one http n netalyzr icsi berkeley edu summary id ca f- - eb -b a - f - for the same computer and another http n netalyzr icsi berkeley edu summary id ca f- - b - dc - - My Mums computer decided it doesnt like java and wont run ics netalyzr My computer is on Ethernet but the laptop is on wifi So do you guys have any idea what is going on is it my computer the router or what Any other info u need just ask Thanks in advance Max nbsp

A:Ping issues in games and on and off packet loss

Anyone? :/
Relevancy 36.55%

I have started to route CAT e cable to make a wired network I have a server running Server a custom desktop running windows laptops running windows I have the modem and the wireless router in issues to connecting network Having a server the library I have the modem connected to the internet port of the router and one of the loads is connected to a wall jack that Having issues connecting a server to network connects to a cable that runs about feet to its termination This termination is connected to a Having issues connecting a server to network port switch Having issues connecting a server to network The server is connected to the switch directly Based on my understanding my server should have access to the internet and my network should have access to my server With this setup I have full internet access on every machine but the server and I cannot access the server from any computer I have hooked up the server to a second wireless router as a load and was able to successfully access it through the second router but there is no internet The network on the server shows up as Unidentified Limited Access when directly connected to the switch Has anyone seen this before or have an idea to fix this issue nbsp

A:Having issues connecting a server to network

Load? It'd be easier if you drew a diagram. Some of the info is missing.
Relevancy 17.63%

Hi I'm new to this site and I'm hoping I can find some answers here. My PCI-e Wifi adapter is working, and I'm able to connect to a wireless access point fine. But when I open my browser and go to google, it will not load. And evetually it says "No network connection."
However, if I plug a different adapter in, everything works perfectly fine.
One weird thing about the first adapter is that sometimes if I refresh the router, it will connect for like five seconds. Then stop working again. The device is fine, and system tray icon for wireless has no warning or disable indication.

A:Network card working but no internet

Power cycle the modem
unplug the router from ac and modem and wait for the router lights to flash and are ready
Power on the router and connect it to the modem
Go into the router and make sure under WAN (internet) it gets the DNS from the ISP there should be two of them listed. If you see 0.0.0. or 192.168.x.x then the Router is not communicating correctly with the modem.

If you see this the router would need a factory reset and re-run the setup again.
If all looks good but it's the PC that not connecting

Open up a dos session prompt run as Admin

Under dos prompt
type: ipconfig /flushdns


ipconfig /flushdns
nbtstat -R
netsh int reset all
netsh int ip reset
netsh winsock reset
sc stop Dhcp
sc start Dhcp
sc stop Dnscache
sc start Dnscache

reboot your PC
Relevancy 17.63%

Hey all After shutting down my laptop running Vista the Unidentified Internet no network, connectivity next day I couldn t connect to the internet It connects to the network but says Unidentified network, no Internet connectivity quot unidentified network quot and there is no Unidentified network, no Internet connectivity internet connectivity Now another laptop in my house connects the network fine and internet is working perfectly So it is this laptop causing hassles I don t want to presume but it may have something to do with uninstalling AVG I tried to Unidentified network, no Internet connectivity install AVG day trial and the install failed for some reason I thought it might be some problem to do with older previous AVG versions on the laptop There was no AVG on the add remove programs function in control panel but after seeing bits of AVG over the C drive I downloaded and used AppRemover to completely remove AVG It found AVG or I can t remember exactly and I uninstalled it with that I hibernated the computer a few times and think this was the first time I had shut down the pc since finishing this uninstall Next time I booted up my internet connectivity doesn t seem to be working Just speculating on what the cause of the problem is so am open to any suggestions grinthumb Any help with this would be amazing grinthumb nbsp

A:Unidentified network, no Internet connectivity

Try CCleaner and do a registry sweep.
Relevancy 17.63%

HP Pavillion with Windows Vista
Using a Diamond 300 mbps Wireless Repeater
Netgear Wireless Dualband Router N600 WNDR3400v2

When attempting to open IE, a popup opens that says:
Connect to
The server at GoAhead requires a username and password.
Warning: This server is requesting that your username and password be sent in an insecure manner (basic authentication without a secure connection).
User name:
and OK and Cancel

In device manager, computer doesn't recognize a wireless device.
It displays NVIDIA nForce 10/100 mbps Ethernet but nothing else.

Other devices (laptop,Ipad) can connect to the wireless in the home.
Internet provider says it is not on their end.

Can someone please offer some advice on how to resolve this issue.

Thank you

A:Desktop Wireless network not connecting

Go to Device Manager, find the wireless adaptor. It should have a yellow ! symbol next to it.

Post details here, then you need to install the drivers for it.
Relevancy 17.63%

After looking for weeks now I found this website that might help me with my problem Please bear in mind that this problem is happening only on my Desktop disconnection when gaming Network Whenever I try to play an online game such as BF CS GO or Gotham Imposters my internet disconnect and then reconnect again resulting me getting kicked out of the game I tried these solutions Reset the modem Reset the router Reinstalling NICs drivers Ran anti virus spyware malware multiple times Reset my network stat using specialized programs Diagnosing the network from netstat to pinging Google Nothing seem to be wrong with it Rebooted the PC over times in the last hours Flushed the DNS Yet the problem is still there and I have no idea how to fix it System specs Windows Home Premium x bit NIC Realtek GBE and ASUS wireless card Router Linksys e And this problem is happening on two network cards so it s not something wrong with my NIC my guess it s something to do with DNS If you have an answer please let me know and if you have questions about extra information let me know so I can post them P S this is my DDS file report that you might need nbsp

A:Network disconnection when gaming

DNS is not the issue. Much more likely you need to
1) update the firmware in your router
2) update the driver(s) for your NIC or WiFI

and then set the router MTU to 1492
Relevancy 19.35%

So I have a a small home network setup for many years two desktops and two laptops recently added a tablet often I map drives have an external hard drive connected to USB port on router to share files all the devices can copy open and share files Life was great Then I got a new laptop with Windows and upgraded Having Issues Windows with 8 one of my desktops to Win my wife wanted it Since then can still connect all devices to internet no issues The problems are neither of my Win machines consistently will see other machines on network or external HD By consistent I d estimate maybe out of times it will on rare occasions connect but not the other times I have noticed a pattern at least now a half dozen or more times on the lap top if I m connected on an Ethernet connection I can see other devices but as soon as I unplug no longer can connect to the other devices I haven t tried this on desktop as no Ethernet port close by to test I ve tried a number of Having Issues with Windows 8 things verified Network Discovery is turned on I also can Having Issues with Windows 8 t connect from my Win desktop to either of the Win machines On the Win machines under network the name of the device shows up but when I try and connect I get error stating machine can t be found check spelling but yet the name it can t find is listed right there Or will get error stating quot The network path was not found quot From what I ve read am thinking problem may be related to not finding host name but not sure how to test or repair or determine for certain what is the issue Any suggestions nbsp

A:Having Issues with Windows 8

I've notice that with the two systems the run 8. With 7 you don't have this issue. Are you running Homegroup with Workgroup. If you don't need Homegroup disable that feature. Try to use Workgroup. But I must tell you Microsoft has changed the TCP/IP features in 8 where 7 doesn't have certain of the new protocols. I've added that with my JASPER script which I've been testing. That adds one aspect of the missing puzzle. But with 8 there is still some network features that will not be seen by 7 shares or DLNA that works with 7 but won't function with 8.

Hopefully the Windows 8.1 patch or update will fix these issues.
Relevancy 17.2%

I have a PC that has to connect to a server through a modem for security reasons.
While it is connected to the modem, a screen needs to be printed.
The printer that is being used is connected to the local network.
While connected to the modem, attempting to print gives the error "The RPC server is unavailable."

Windows XP Professional SP3
Printer server is Windows Server 2008
Modem is old 56k modem connected by serial port (don't think that matters)

What I've tried:
I have tried modifying the routing table to force connections to the subnet that the computer and printer are hosted on.
route -p add MASK METRIC 40 IF 0x2
ip for the PC is, ip for the printer is, IF 0x2 is the integrated NIC
The RPC service is running, and I have also started the RPC locator

Any suggestions what I should do next?

A:Unable to print to network printer while connected to modem

These are correct

ip for the PC is,
ip for the printer is, IF 0x2
but this is not

route -p add MASK
and should not be necessary at all, if the PC gateway is on 10.1.61.x

Instead, get the output of ROUTE PRINT and post that