Windows Support Forum

Vista IE7 closing browser error

Q: Vista IE7 closing browser error

Whenever I try to close the web browser I am getting the error message and shuts down all others opened web browsers. Also after it shuts down, it starts all over again.

Does sombody have any idea how to solve this issue?

If you try to close the web broswer after the new is opened in this case it pop up the message to close the web application but technicly you cannot close it because web browser does not responde it.

Relevancy 100%
Preferred Solution: Vista IE7 closing browser error

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

A: Vista IE7 closing browser error

Disable your add-ons. goto tools enable/disable add ons and disable each one until our problem with the error stops. I did it for mine and i no longer have the error issue.
Hope this works.

http://www.techsupportforum.com/forums/f217/vista-ie7-closing-browser-error-236095.html
Relevancy 19.78%

So about a few weeks ago (not exactly sure when it started) my computer stopped allowing me to access certain websites. It started out with only a few, but now it is almost 50-80% not connecting. I do not think it is a problem with my browser. I typically use Firefox, but IE will connect to the same ones Firefox allows, and will also not connect to the same websites Firefox will not allow.

I have searched these forums for a couple of hours now and nothing seems to fit my exact problem, and I am hesitant to use the solutions from other forums because it might further hurt my system. I am not tech-savvy/computer literate to say the least, and I would need a thorough walk-through on how to diagnose the problem, as well as how to fix it.

Any help would be greatly appreciated.
Thanks

A:Unable to connect to most websites -- not a browser problem

How are you not allowed to view the website? Does the page show "The page cannot be displayed"? or you are not authorized or something else?

Try running cmd.exe, type "ipconfig /flushdns" without quotes.

http://www.techspot.com/community/topics/unable-to-connect-to-most-websites-not-a-browser-problem.177710/
Relevancy 20.21%

About two days ago I started getting popping and crackling noises from my laptop speakers while playing any kind of in-browser video. It's not a hardware thing, because anything run outside the browser (CDs, iTunes, VLC, DVDs, etc.) sounds just fine. Tested in both Firefox and Safari, both have the popping/crackling problem, so it's not something with one browser.

I have tech support for this computer (Dell business model, Latitude E6500 w/XP), they tried updating sound card drivers, updating BIOS and uninstalling and reinstalling sound card. The last thing actually fixed it, until I started up my PC tonight, now the problem is back again. Anyone have suggestions for me? I really, really don't want to do a restore, because I've just spent the last four hours installing a game that I would then lose. If that's the only option, though...

Don't seem to have any issues with connectivity, or lag that I can detect.

A:Speaker noise only in browser

Uninstall and Reinstall Adobe Flash Player, in-browser video's use Adobe Flash player and since it is browser only related this may indicate there's an issue with Flash/the codecs for flash.. Just do a reinstall, post back with if it worked.

http://www.techspot.com/community/topics/speaker-noise-only-in-browser.181860/
Relevancy 12.9%

I have a three month old Dell Dimension GHZ P Gig Ram and a gig SATA Hard Drive When I got the computer I used the files and transfer PC Relocator utility And had in Error system drives did hard Message: disk find Setup not your installed any a bunch of unwanted extras that came with it I m having a Satellite Internet system installed and they wanted a clean install of windows XP So I opened the owner s manual and got out the reinstallation disk and the problems began By the way Dell tech support s only response has been to say gee that s not right and would send a tech sometime after Christmas Anyway heres step by step what I did I boot to the Dell reinstallation disk Error Message: Setup did not find any hard disk drives installed in your system The windows setup screen appears and loads files The next screen says welcome to setup and offers three options -to setup XP press enters To repair XP press R to exit without installing XP press F I press enter and the following message comes up Setup did not find any hard disk installed in your computer Make sure any hard disk drives are powered on and properly connected And any disk related configuration is correct ect Press F to quit It dose this if I try repair also Dell had me check the connections to the HD and Motherboard They re good And debug the hard drive No luck Everything worked fine until I put in the reinstallation disk Any help would be welcome nbsp

A:Error Message: Setup did not find any hard disk drives installed in your system

During Setup, it will ask you if you need any extra drivers such as SCSI (or SATA in your case). If so, press F6. Now you are in trouble, because SATA drivers come on a floppy and new(er) Dells don't have a floppy anymore. Borrow a floppy-drive from another PC and install that in your Dell.
Setting up with the Dell disks, I'm not sure if they are RESTORE-disks or full XP-disks.
That may cause another problem.

http://www.techspot.com/community/topics/error-message-setup-did-not-find-any-hard-disk-drives-installed-in-your-system.18329/
Relevancy 13.33%

Hello everyone,
One fine evening while watching a movie, my laptop stopped responding and in frustration I switched off the laptop by holding the power button long enough to turn off. Next Morning it showed a blue screen and a message to recover my windows, which I failed to do and by the afternoon this message showed up. Detection Error on HDD0 (main HDD) and hence forth I've been unable to install windows from a USB drive since ( and I suppose) it is not able to read my HDD. I do not care about my data at all, I just want my laptop up and running. If I can have the data back it will be perfect otherwise I don't mind not getting my data back. I know for a fact that my Hard disk is fine because I went into command prompt, diskpart , and list disk, and saw the status of HDD as healthy, this is after the error (detection error on HDD). SO my question is: Why this error? IS there a problem in the motherboard? Why the error shows once and then doesn't show the next time and then comes up again.

A:2100: Detection Error on HDD0 (Main HDD); Lenovo Thinkpad Yoga

The error might be bad sectors, but I'm not sure. if my guessing is correct, you might have to get a new drive to replace. also you need to reinstall OS

Relevancy 13.76%

Hello,

I bought a R9 270X by XFX. My current specs are:

CPU: AMD A10 7800k (Standard Clock Speeds, Graphics Disabled)
RAM: 4GB (2 sticks, both working)
Motherboard: FM2, Gigabyte
PSU: 500 watt 80+ Cert Silver
HDD: 500GB WD Blue

So the issue is that the R9 card consistenly crashes out of all games no matter if I uninstall the drivers or reinstall them. I have tried removing the drivers through catalyst control center and through application based tools (DisplayDriverUninstaller). Once I uninstall and reinstall, it works, until the computer is restarted and then rinse and repeat.

Is this the card saying it is dying? If so it is a weird way of graphics card dying.

http://www.techspot.com/community/topics/r9-270x-doa-or-user-error.209138/
Relevancy 13.76%

Hi, I am having a problem with my external hard drive not working. My laptop cannot read the drive, it does not display properly in my computer and when I try to click on it it freezes and the message appears "Drive is not accessible, parameters are incorrect". I used it about three weeks ago and it was fine so I don't know what happened. I always make sure to safely remove it and am careful not to damage it. The light still still turns on when plugged in and I can hear it trying to work.

I really want to keep the files as they are from my previous laptop which died and do not have them stored anywhere else. My fault I know, but I had thought external hard drives were more reliable and I do not like the idea of cloud storage. Because of this I am hesitant to try CHKDSK. Is there anything else I can do to recover the files or fix the drive? If I take it to a computer technician would they be able to do it?

http://www.techspot.com/community/topics/external-hdd-error-not-accessible-parameters-incorrect.208079/
Relevancy 14.19%

Ok, I have the question of em all: at every game I try to unzip it gives me the crc error. I tried reinstalleing my windows, tested my RAMs(noo error found)reinstalled the drivers, nothing. I have the next output: amd a8 6600k 4gb ram r7 260X video card and gigabyte f2a55m-s1 motherboard. what should I do? also tried 7zip and latest version of winrar, and I get the memory managemet error

A:CRC error

Seems a bit odd you are unzipping games.. Do they unzip on other computers fine? If so, run a hard drive diagnostics utility like SeaTools. If you can't test on other computers, what are you trying to unzip specifically, games shouldn't be zipped...

http://www.techspot.com/community/topics/crc-error.207554/
Relevancy 14.19%

I've never seen this before. It just popped up a bit ago on my W7 pc.

What does it mean? I hope its nothing bad.

A:RAID error?

I found this in a google search http://h30434.www3.hp.com/t5/Desktop-Hardware/AMD-RAIDXpert-Warning-Errors/td-p/342708

I've known this pc has RAID on it because everytime it reboots/boots up it shows it. I've had this pc for two years this month & just hoping nothing bad is happening.

http://www.techspot.com/community/topics/raid-error.207317/
Relevancy 13.76%

My toshiba will not get on the Internet Google will come up and search but everytime it says Internet error

A:Laptop Internet error

Need specific; try looking in the cmd-> enter eventvwr.msc

http://www.techspot.com/community/topics/laptop-internet-error.207423/
Relevancy 13.33%

We just bought a monitor U2713H direct from Dell.

When we click on Factory Reset, the monitor doesn?t go back to Factory default setting.

-In particular, Contrast/Brightness: 0.
In terms of Color Setting, Input color Format: None.
Preset Modes: Movie

-Then we click on Reset Color Settings, Input Color Format: RGB, Preset Modes: Standard.

-When click on Factory Reset again, Contrast/Brightness and Color Setting come back to the same condition as above (Contrast/Brightness are 0, Input color Format: None.
Preset Modes: Movie).

-After we try to set up Contrast/Brightness to 50/50, we shut down desktop or turn off the power button on the monitor. Then we turn on computer or turn on power button on the monitor, Contrast/Brightness are 0, Input Color Format: None, Preset Modes: Movie.

-In summary, all menu settings can?t be saved by the monitor and Factory Reset doesn?t work.

Any idea would be highly appreciated. Thank you a lot in advance

A:Dell monitor U2713H error: settings can't be saved

What I would suggest is ask Dell if they would warenty it new it should have one and Dell should honor it. I would say they will but I have not done business with them in years, although the monitor I am using right now is one of theirs and is many years old.

http://www.techspot.com/community/topics/dell-monitor-u2713h-error-settings-cant-be-saved.207032/
Relevancy 13.33%

Printer Problems in Windows XP sp3
Dell Personal Printer all in one A940
After trying to speed up an older computer running Windows XP
I may have cut off the Print Spooler (or it was already off ?)
I went back to Services dialog box & selected Print Spooler
I clicked the "Start" link at left of service list & got a message tgat said
"could not start print spooler service on local computer error 1068 The dependency service or group failed to start."
Printer is still not working can anyone help?

A:Could not start print spooler service on local computer error 1068

On Win/7 the dependencies are

HTTP

Remote Procedure Call (RPC)
DCOM Server Process Launcher
RPC Endpoint Mapper
Manually start each on and set to AUTOSTART as you go.
If one fails, then that is the root problem.

http://www.techspot.com/community/topics/could-not-start-print-spooler-service-on-local-computer-error-1068.206839/
Relevancy 13.76%

Hi,
I am having a problem with my DVD hardware. Every time I put a disc in and open it in Explorer I get I a popup asking me to burn a disc (image file attached). I've tried going through all kinds of settings but nothing works. I am running Windows 8.1. Any help would be appreciated.

Thanks,

Verity

A:Burn Disc Error

That's autoplay setting for blank disk media.

http://www.techspot.com/community/topics/burn-disc-error.205054/
Relevancy 13.76%

I decided to upgrade my old hard drive to a new hard drive. When I tried to install Windows Xp on the hard drive it wouldn't let me. I have a Dell Xps 400 bought back in 2006.
The new HD is a WE 1tb. The error codes comes when I try to install windows xp on the hd. It says

I got a blue screen error after clicking enter at the screen where there is no partition found:
Check to be sure you have adequate diskspace. If a driver is identified in the stop message, disable the driver or check with manufacturer for driver updates. Try changing video adaptors.

Check with your hardware vendor for any bios updates. Disable bios memory options such as caching or shadowing. If you need to use safe mode to remove or disable components. Restart your computer, press f8 to select advanced startup options, and select safe mode.

Technical information:

http://www.techspot.com/community/topics/error-on-trying-to-install-new-sata-hd.204857/
Relevancy 13.76%

Hello all,
Windows 7 doesn't recognize my SSD drive. When I go to disk management, it shows a message to initialize it (image no.1) but when I press OK to do that, one another message appears and says: Data error cyclic redundancy check (image no.2). My computer windows doesn't show that drive and also when I went to cmd->diskpart, again it didn't show that disk to use of chkdsk /f command. How to solve the problem please?

A:Data error cyclic redundancy check ssd

I could to revive that disk in diskpart using PartedMagic in boot. I've uploaded a new image from that. The remained problem here is that I can't delete it there.

http://www.techspot.com/community/topics/data-error-cyclic-redundancy-check-ssd.204783/
Relevancy 13.76%

I am running Windows 8.1. After restarts, the laptop screen would be blank, yet the computer would load. If I hooked up a 2nd monitor, it would show the desktop on that screen but laptop screen blank.

Now when I try to type on that computer (I'm currently on a different computer) the typing of the keys is all off (none of the letters actually type what they are supposed to and some open up random windows and command prompts)

I am wondering if this is a virus. Currently running Malwarebytes. I did a system restore earlier and the problem wasn't solved.

A:Blank Screen error and typing issues

Could be a virus, but could also mean the motherboard is faulty. If still in warranty, RTM.

Does the laptop have a bootable CD reader? If so, then download and make a bootdisk of a small linux (e.g. puppy linux). Booting off that will virtually prove if the motherboard is faulty or not.

http://www.techspot.com/community/topics/blank-screen-error-and-typing-issues.204596/
Relevancy 16.34%

Hello I have just removed much malware and viruses from a computer with windows vista. It is still running slow from time to time, having problems with freezing on the internet and I thought maybe by defragging it would fix the issue. Yes I have reset firefox many times, scanned many times fully for viruses and malware, removed and reinstalled flash player, etc. I need to first backup the C drive only because the D drive is full of crap. I cannot afford to do anything other than DVD-R to store it on. I am trying to find out how to do this. Is anyone familiar with such a process?

A:How do I backup C drive from Vista to DVD-R?

First, run CLEANMGR for each login on the PC and that includes Administrator.
This reduces the amount of data captured to at least active & meaningful.

Second, IMO backup \Users and forget all else

http://www.techspot.com/community/topics/how-do-i-backup-c-drive-from-vista-to-dvd-r.202672/
Relevancy 16.34%

Earlier I was surfing when the monitor went black & the laptop shut down. Simple as that/ I booted it up & no problems till a few minutes ago it happened again. Both times I had two tabs open. I'm going to save what needed in case I do a factory restore. Vista Home Premium

A:Black screen twice on my Vista

http://www.techspot.com/community/topics/black-screen-twice-on-my-vista.202144/
Relevancy 12.04%

Hi I have an older PC which I gave to my mum It originally ran Vista but I bought and installed Windows Ultimate around weeks ago after it had been inactive for months It was running great but a couple of weeks ago it just started hanging for no real reason Also at startup it would say that the computer had not been shut down properly even if it had This was only when it was switched off at the wall not after checksum defaults loaded" replaced error battery after - "cmos a restart or when the PC was left plugged in and switched on She only "cmos checksum error - defaults loaded" after battery replaced uses the PC to look at You Tube and some webcams from her grandkids and that s it she s not very computer literate Initially I left Windows repair to run overnight but when I looked at it the following morning it was still in the repair screen so I assume it had hung I spoke to a local repair shop and they suggested I test the RAM test the hard drive and replace the CMOS battery The RAM and hard drive checks went without any errors and after I replaced the battery the hanging stopped I played with the computer all evening and shut it down as normal and switched it off at the wall Next day I thought I would start it up just to check it and I was faced with a quot cmos checksum error - defaults loaded quot message I thought that was strange but maybe the battery was dead so I swapped it over with one from my perfectly working desktop to try it out and my desktop worked fine but after shutting down my mum s one it had the same problem when power was pulled So battery was ruled out Incidentally I will say that I reset the BIOS date and time every time I was faced with the error following up with a save and exit It worked fine until I unplugged the computer I then moved on to the BIOS and set it back to default and the same again After this opened the case and used the jumpers to reset the BIOS to default again but no difference My mum will not leave it switched on at the wall constantly in case it self-combusts same with her washing machine TV lamps etc otherwise I would just do that and ignore it Is there anything else someone can suggest that I try System Shop bought by Mesh Motherboard is an ASUS PSN-E SLI gb Ram - samsung gb hard drive - ASUS Thanks for any help nbsp

A:"cmos checksum error - defaults loaded" after battery replaced

I must add that the PC is the same as when I bought it new from the shop, except for adding a Creative Labs sound card (approx 2012) and installing Windows 7 (around 6 weeks ago). All Windows updates are downloaded and installed.

Relevancy 14.19%

I recently receive a pop out error message everytime I start up my laptop. Can anyone please advise? Thank you! The error message is below.

There was a problem starting
C:\Users\XXX\AppData\Roaming\newnext.me\nengine.dll
The specified module could not be found

http://www.techspot.com/community/topics/rundll-error.201803/
Relevancy 14.19%

Hello,

When I play BF4 I get a direct X error after awhile claiming that it cannot allocate any more memory and that I should use a GPU with at least 512 MB RAM.

I have tried to search around but cannot find a solve really.

Some people advise to disable the Intel integrated Graphics in the device manager but no one can confirm if it works or not so I am hesitant to try it...

I have updated drivers for Dx and the GPU without resolve, also tried reinstalling them.

It has not happened for any other games so far but the only game that really demands any memory I play is BF4 ... I will try with Crysis 3 or something similar demanding to see if the error happens there too.

A:DirectX error for AMD R9 290 Tri x 4GB

Obzoleet said:

Hello,

When I play BF4 I get a direct X error after awhile claiming that it cannot allocate any more memory and that I should use a GPU with at least 512 MB RAM.

I have tried to search around but cannot find a solve really.

Some people advise to disable the Intel integrated Graphics in the device manager but no one can confirm if it works or not so I am hesitant to try it...

I have updated drivers for Dx and the GPU without resolve, also tried reinstalling them.

It has not happened for any other games so far but the only game that really demands any memory I play is BF4 ... I will try with Crysis 3 or something similar demanding to see if the error happens there too.

Anyone have any advices?Click to expand...

Well in all technicality the game should not be defaulting to the integrated unless you have your monitor hooked up to the on board connectors so I would not worry about that. If its reading as a memory problem in BF4 then it maybe a problem with BF4 drivers. I have not played in a few days on my 290X setup but an update was just downloaded I noticed a day or two ago.

Have you tried changing over from directX to Mantle and seeing if that helps or vice versa?

Also try the latest Beta 14.2 because it makes things alot more stable than 14.1 was in terms of Mantle at least.

See what happens after trying this, the Intel Integrated should not be interfering so I would not worry about that.

http://www.techspot.com/community/topics/directx-error-for-amd-r9-290-tri-x-4gb.200757/
Relevancy 13.76%

Hello I got a weird one for you guys and I literally have tried everything can think of so I am hoping someone has some new fresh ideas I have a Dell Latitude E that can no longer connect via wired or wireless connections Both adapters display yellow exclamation marks next to them and in the properties of both adapters says Windows cannot install because the drivers are not recognized Error Both adapters are also missing from the adapter page in network settings I have download the most recent versions of the driver and installed no luck I have downloaded previous version of the driver from dell and installed no luck I download the driver directly from Intel and installed no luck Tried a BIOS update nothing Tried to reset to defaults nothing So I decided I would rebuild the is one Windows 31, not NICs weird Error this working 7 machine and SURPRISE that worked for a week and then the problem started again So my first thought is well maybe its a bad motherboard so I swapped the HDD with another Dell E boot it up and NICs not working Windows 7 Error 31, this one is weird both connections are working In the laptop with the drive from the bad laptop it can no longer connect now so the problem is related to windows and follows the drive Does anybody have any idea whats happening hear I am all tapped out of ideas Thanks let me know if you need any additional info Dell E Windows Enterprise auretsky vailresorts com nbsp

A:NICs not working Windows 7 Error 31, this one is weird

"so the problem is related to windows and follows the drive"... Re-install Windows on this drive. Error 31 relates to a bad driver that may be reflected in the device manager

http://www.techspot.com/community/topics/nics-not-working-windows-7-error-31-this-one-is-weird.200795/
Relevancy 14.19%

The web server in my IIS has the Default web site stopped. When I hit start, I get an error message
there was an error while performing this operation.
Details:
the process cannot accdess the file because it is being used by another process. (Exception from HRESULT: 0X80070020)
The site bindings are:
:*:57772 (http),*:443 (https), 808:*(net.tcp), *(net.pipe), locathost (net.msmq), localhost (msmqformatname)
Can anyone point out what is wrong?

A:IIS error

That error is saying
1) one program (process) as a file open
2) another attempted to modify or delete it

A most common case is when a process is running and the current directory is \temp\foo\bar

and some process is attempting to delete foo

http://www.techspot.com/community/topics/iis-error.200665/
Relevancy 13.76%

When I am accessing wifi network I get dns failed error message. what is the problem? pls help

A:DNS failed error in WiFi network

Can you connect using a wired connection?
Get a command prompt and enter
ipconfig /all >myTCP.txt​then open that file, copy the contents and paste into your follow-up

http://www.techspot.com/community/topics/dns-failed-error-in-wifi-network.200577/
Relevancy 14.19%

I am also getting a bad image error it pops up on six or 7 start ups ive run mbam disk clean up disk defrag scan disk but its still there. ive looked over many posts and tried to follow others instructions but im still missing something

Jarrow, what are your computers specs?

Relevancy 13.76%

My graphic card showing error on Pc starting
When I start the computer it restarting with this error vt-x1550pci256

this error showing on top left on screen what I do Now ?

ps : sorry for my bad english

Relevancy 13.33%

How serious is this? I'm running on a Dell laptop with a Intel(R) ICH9M-E/M SATA AHCI Controller.

It is saying that I should back up all of my important files because of possible hard drive failure.

A:Hard drive is reporting a Smart Event error message

It telling you your hard drive is on its way out. You can try running a check disk and see if that helps. But to be on the safe side you should back up your personal files.

http://www.techspot.com/community/topics/hard-drive-is-reporting-a-smart-event-error-message.199432/
Relevancy 13.76%

Hi All,

I have made a new rig and wanted to transfer the video/music from old IDE hard drive.

I have tried two IDE to USB convertors and when I try to access my old hard driver from My Computer I receive the error "Format Disk"

I have restarted my PC and now it doesn't even detect it!

A:Format Disk Error with IDE to USB Converter

Sounds like the partition table is messed up on the IDE hdd. The data is still there, but windows just cannot figure out how to "read" that drive. More than likely you'll need a 3rd party application to view the data on the drive and copy it accordingly. I use UFS explorer in the shop to recover data from customers' hdds http://www.ufsexplorer.com/download_std.php There are many other 3rd party data recovery programs/application out there, just google it & I'm sure you'll find one that fits your needs.

Post back, Hope this helps!!

http://www.techspot.com/community/topics/format-disk-error-with-ide-to-usb-converter.198116/
Relevancy 12.04%

Hey,
I woke up on May 10th 2013 & when it started up my laptop I saw this.

I was a bit scared, but I decided to run the following programs:
Mbam (AV)
DSKCHK
Disk cleanup
Disk defragmenter
Scan disk (SCR-scanow)
AVG tuneup
AVG (AV)
MSE (AV)
Restore point.
I do not know what happened, but I have posted on several other forums, but no answer.
Thanks,
Danawesome.

A:Repeated "bad image" error (think it's something to do w/laptop)

Did you fix this?

Relevancy 19.78%

Greetings Let me start by saying that what I am about to describe is NOT a malware virus problem It does involve a browser being redirected to the wrong website but we have checked repeatedly and to the best of our abilities we have ruled out malware or viruses Windows desktop Internet access is through ethernet wired redirect browser/website a -- challenge/mystery Got through a router that also provides wireless access to other devices in the house What we have is a single computer in the house out of desktops laptop and tablet that cannot reach a single specific website an SMF forum using Internet Explorer or Chrome It CAN get there using the AOL browser What happens with Got a challenge/mystery -- browser/website redirect IE and Chrome is that the browsers are redirected to another non-malicious as far as we can tell website that resides at the same Got a challenge/mystery -- browser/website redirect webhosting service as the website we are trying to reach Tracerts and Pings go to the correct site Other users as in people all over the country can reach the correct site Other computers in the same household go to the correct site using both wired and wireless access This appears to be a very computer-specific problem It does not seem to be an IP problem because the other computers in the house are not encountering it and it is not a website or network problem because no one else is running into the problem Any thoughts The only other piece of information that seems pertinent is that back in July this same computer suddenly could not reach the quot target quot website at all no matter what browser was being used All browsers would stall and time out or give a quot website can not be found quot type of message Tracerts and pings failed completely The tracerts said that the website could not be resolved and never generated even a single hop At the time we consulted a number of people and the only explanation that seemed like it might have merit is that it might have something to do with the MAC address Someone else suggested that it had to do with TCP IP settings We never got it fixed The problem just half-corrected itself about two weeks ago and then went sideways to the current situation What s different between IE amp Chrome versus the AOL browser that could explain this If you have an idea please use dummy talk I m fairly good with computers but networking and IP protocols baffle me Thanks Macgyver nbsp

A:Got a challenge/mystery -- browser/website redirect

Get a command prompt and enter these two commands:
ipconfig /flushdns​net stop "dns client"​quit the browser and restart it. Now access a good site (aka this one) and then a site you are having issues with.

What's the results?

http://www.techspot.com/community/topics/got-a-challenge-mystery-browser-website-redirect.198437/
Relevancy 15.91%

Its currently set at 1280 x 800 pixels. Its 14 inch diagonal. Is that correct? TIA

A:Settings for my Vista laptop Monitor

In the control panel under display. Dose it say it say 1280 x 800 is it's native display. ?

http://www.techspot.com/community/topics/settings-for-my-vista-laptop-monitor.197414/
Relevancy 16.34%

Networked for years in XP machines.

I read help files how to but, could not make it work.

My w8 win wxplorer list shows under Network the VISTA LAPTOP. When I click on it it asks for user name/password but, what name & password?.

Any body knows what does it refere to?

A:Failed to network w8, xp & vista

Hey nichos. Was a name and password used when this Win8 system was first set-up. When I first unpacked a WIN8 laptop, it threw me for a loop as it requires a username and password to unlock it.

http://www.techspot.com/community/topics/failed-to-network-w8-xp-vista.197366/
Relevancy 13.33%

Hi,

I have Windows XP SP3 installed on my desktop and suddenly my LAN/NIC is not receiving and sending packets from my network. The DHCP Client Services and TcpIP services wont start it gives error from the above.

From the device manager of non-plug and play drivers, the tcpip protocol driver, ip network address translator and netbios over tcpip has exclamation point. When I uninstall the drivers and start the services the connection is established but when I shutdown/restart the PC it will came back again the issue.

AFD is running

Below drivers are present in system32\drivers folder.

afd.sys
tcpip.sys
netbt.sys
Any ideas?

A:DHCP Client Service Won't Start - Error 1068

Hello,

I update the system and the LAN driver but still the issue exist.

I copy the netbt.sys from a working machine and paste that to the non-working machine. Same problem.

Is there other way resolving this issue aside from repairing or fresh install of the OS?

http://www.techspot.com/community/topics/dhcp-client-service-wont-start-error-1068.197233/
Relevancy 13.76%

Hello all!
I regularly have the folllowing line appear when my bios starts up -CMOS checksum error defaults loaded. I am having a problem about CMOS Checksum Error, every time I turn on the computer it will wait about 30 secs before the first beep. Then the CMOS checksum error occur. Some days ago I had changed my battery after that this problem occurs. Please help me. I have a snapshots of the same problem.You can check here: http://wealthamplifier.in/images/cmos1

A:CMOS Checksum Error - Defaults Loaded

Could you have installed the battery backwards by mistake? Even though the battery is new, it could be defective.

Relevancy 18.06%

Not sure if I'm in the right section

Just unpluged my m audio delta 2496 card to do some other repairs. After reconnecting and powering up I have no sound in Cubase ( In device setup selecting m audio delta driver I get the following Error message "audio engine error could not activate asio driver m audio delta" Now even windows system sounds don't work. Have tried re-installing 2496 driver....no go. Any suggestions would be welcome.

A:Error message "audio engine error could not activate asio driver m audio delta"

List any Problem devices

Make sure devices are connected and powered on
Click Start->Run, enter: msinfo32. Click the + sign next to Components to expand it
Click Problem Devices. Anything appear?
If yes, click on it, Ctrl-A to select all, Ctrl-C to copy it, Ctrl-V to paste into next post
On the other hand, if no devices are listed, tell me so
Generate and attach a DirectX report

Click Start->Run, enter dxdiag and click OK
===> If you?re running 32 bit Windows, dxdiag will launch on its own
===> If you?re running 64 bit Windows, you?ll see 64-bit DxDiag. Click it to launch the 64-bit version of dxdiag
Notice progress in lower left window corner
When done, click Save Information button and save as a text file to your Desktop
Click the Upload a File button to upload and attach the file to your next TechSpot post

http://www.techspot.com/community/topics/error-message-audio-engine-error-could-not-activate-asio-driver-m-audio-delta.197151/
Relevancy 15.91%

Once in a while when using my Vista Home Premium laptop on battery, it'll shut down after a few minutes even thou my settings are set to Turn off Display after 1 hour.
Put computer to sleep after 2 hours.
When I go to start the laptop back up, it gives me the choices of which "Start Windows Normally" is one of them. Confused as heck.

The laptop may be over-heating or the battery is going bad...

Relevancy 30.1%

Normally, 99.999% of the time I just shut it down completely but I'd like to know what "sleep" means?
Does that mean if I do so, upon opening the lid it'll be where I left it at?
I notice in Control Panel>Power Options>System Settings whether its on battery or plugged in , it shows sleep.

A:Choose What closing the lid does?

I recommend sleeping the laptop if you are gonna use it after you close it within the next few hours. Otherwise shut it down.

http://www.techspot.com/community/topics/choose-what-closing-the-lid-does.196755/
Relevancy 14.19%

I have to new hp laptops same type and specs but for some reason one of them gets a dns error and the other doesnt why?

A:DNS Error

Compare the output of IPCONFIG /ALL for the two machines; suspect the failing one is not accessing the DHCP properly . . .

http://www.techspot.com/community/topics/dns-error.196646/
Relevancy 14.19%

I tried to format my laptop today but I cant. "It said that my pc needs to be repaired" and "the application or operating system couldn't be loaded because a required file is missing or contains errors." What should I do then???

A:Error formatting PC

"What should I do then???"... The built-in restore feature is corrupt, so you may have to get a Windows install disc. The hard drive may also be bad

http://www.techspot.com/community/topics/error-formatting-pc.196528/
Relevancy 13.76%

lt lt RESOLVED gt gt For some reason whenever I try to run the file benchmark on my WD Blue TB or WD Black TB on HDTune Pro it always immediately returns a screen saying quot I O Error Test aborted quot Normally I would understand if this was happening if these drives were HDTune on gives drives I/O very test and new aborts Error old or had any indication that they are dying in some way However both drives have been purchased within the last months and the Blue drive was purchased only four HDTune gives I/O Error and aborts test on very new drives months ago They are each filled to approximately - capacity at the moment with this being the highest capacity the Blue has ever reached while the Black drive at one point hit before I reshuffled some files I haven t noticed any other issues with the drives at all except that HDTune s regular benchmark seems to say that the Blue drive is slightly faster than the Black which clearly shouldn t be the case HDTune s own drive status program shows no SMART issues in any of my drives either Does anyone know what could be causing this or how I could fix it Also I m not sure if this is relevant but my motherboard is currently set to run its SATA ports in quot RAID Mode quot instead of AHCI mode I HDTune gives I/O Error and aborts test on very new drives m not sure if that would matter but I don t currently have a RAID array this setting is just from a previous array that I used to have and now I m afraid that if I change the setting my drives might not boot anymore nbsp

A:HDTune gives I/O Error and aborts test on very new drives

Never mind, I figured it out. Problem was being caused by my drives being assigned as the A: drive and B: drive (Windows 8 allows this, and my slight OCD has always tormented me at not being able to use them for hard drives previous to this, so naturally I jumped on the opportunity to assign those letters). Anyway I reassigned to J: and K: drives just for the purpose of testing and all is now well!

http://www.techspot.com/community/topics/hdtune-gives-i-o-error-and-aborts-test-on-very-new-drives.196324/
Relevancy 14.19%

I am so close to having my new audio system established On the headphone side all I need to do is place my order However I ve run into Z for 32x, card Sound PCI-E? (Will PCIE SBX Sound Blaster Vista work?) a bit of a snag considering the sound card I was Sound card for Vista 32x, PCI-E? (Will Sound Blaster Z SBX PCIE work?) originally recommended the Sound Blaster Z to pair with my headphones Exact card here the one with the external microphone since I ll need it Unfortunately this sound card specifies Windows and as supported operating systems I asked if it would still work for Vista but the other forum headphone forum seemed to think that it wouldn t unfortunately I m not looking to upgrade my OS As horrible and clunky as it is I ve made it work for me IF it would work with Vista than just let me know and read no further If not I d love if I could get some recommendations for a comparable card I m looking for the best sound card possible given my physical and operational specs I have PCI-E slots x and x free and my OS is Windows Vista Ultimate x The card will support both gaming and music though I m more concerned with gaming than music at this point I m not looking to drop a bundle the SB-Z was a little on the expensive side but as high as or is acceptable Please let me know if you have any suggestions I m raring to place my orders haha nbsp

http://www.techspot.com/community/topics/sound-card-for-vista-32x-pci-e-will-sound-blaster-z-sbx-pcie-work.196149/
Relevancy 14.19%

FYI: For those dependent upon MSN.COM, today the website certificate is no longer valid,
as shown in the attached JPG.

Your A/V program may respond differently, but Avast! found the error and offers two solutions:
1) PUNT, ie abandon the access
2) accept the cert and make an exception for this error

http://www.techspot.com/community/topics/msn-com-certificate-error.196061/
Relevancy 13.76%

Hi I am wondering if anyone has Drill After using Error Hard Drive Disk had the same happening to them or even better if anyone knows how to save my hard drive The external HDD is an month old Western Digital hard drive TB was working perfectly fine before this incident I had some jpg files that I accidentally deleted from my ext HDD so I used disk drill in order to try to recover the files disk drill estimated the process to app hours and during this time I could hear the hard drive making some noises usually it is very quiet When the process was done I saved the recovered images to my mac hard drive and saved the session All seemed fine so I dismounted the WD HDD the image disappeared but when I unplugged the Hard Drive Error After using Disk Drill USB an error message showed up saying I hadn t disconnected it properly Now when I try to connect the WD HDD it makes heaps of noises and clicking sounds and it doesn t show up as a device on mac I tried to open the saved session when WD HDD was connected but a message that I needed to connect the device showed up in disk drill I restarted mac plugged in the HDD and opened disk drill once again and now I Hard Drive Error After using Disk Drill get this message quot Dead disk detected The disk quot WD My Passport Media quot seems to be non-responsive dead Unfortunately you won t be able to recover any data from it without hardware intrusion As a quick recommendation please try to reconnect it to your Mac quot I am devastated everything was working Hard Drive Error After using Disk Drill fine previously I just wanted to recover jpg images and instead I lost everything on my HDD that contained a lot of really important data Please please help me solve this nbsp

A:Hard Drive Error After using Disk Drill

I only use WD drives here. WD Passports sometimes they don't work. What I do is this.
Place one in a ziplock bag and stick it into the freezer for 3 hrs or longer.
Thaw-it or use-it while it comes to life while you connect to a USB source like a PC
Most of the time the Passport will continue to work again. It all depends on the condition of it.

Clicking or clunking means the HDD is going bad.
In the pass others would say to use a screw driver handle and hit the drive.
But I always use the freezing method and it works enough to recover the data.
If the HDD is too far gone then nope not going to work.

http://www.techspot.com/community/topics/hard-drive-error-after-using-disk-drill.195888/
Relevancy 13.76%

Hi all my brother has a pc at home that he didnt want anymore so he put it in some black bags and I was taking it to the charity shop so they could sell it but the bag split at top of stairs and pc went tumberling down when I looked at it all the metal brackets had come loose from where u can put cards in and the gpu card came out to I put it all back propaly had couple of errors that I sorted but power abit dodgy when switching on. but the main problem is message comes up in task bar saying usb not recognised after plugging anything in any of the ports checked device manager and nothing wrong in there please help ... only 2 was not working before but now none work.. thanks in advance

http://www.techspot.com/community/topics/usb-not-recognised-message-error.195740/
Relevancy 13.76%

Hi all,
Can som1 help me?
I have a asus p5n-d mobo, that keeps giving the same error at start up " Cmoc checksum error - Defaults loaded". Ive updated the bios file from 0601 to 0801 and also changed the battery but I keep getting the same message.

Ive tried to reset the bios with the mobo cd but that aren't no help either.
If their arent anything else I can do, im thinking of getting a budget socket 1155 mobo with sli, could som1 recommended a mobo.

Thanks

A:Asus mobo Bios error?

Clear CMOS And Update Bios

http://www.techspot.com/community/topics/asus-mobo-bios-error.195357/
Relevancy 15.91%

Have a new Netgear wireless router and can connect to it, but can only get local access only, no internet.
Tried a few things with no luck so far.
The one thing that did work was eliminating the wireless security, but dont want to leave it that way.
Seems like this is a common problem with Vista.

Can anyone help?

Thanks

A:Local Access Only With Wireless Using Windows Vista

Go to the Device Mgr, expand Network Adapters and look for yellow or red flags. It's most likely that the driver is missing or needs to be updated.

If there's any driver at all, then the led lights near the ethernet cable will be on.

Uninstall the existing driver (but do not delete it) and reboot.
The system should find the device and use the autoconfig feature to install the
correct one.

http://www.techspot.com/community/topics/local-access-only-with-wireless-using-windows-vista.194148/
Relevancy 14.19%

This is my first post and hope I am doing it right, if this is the wrong place to post...I apologize.
quite often when opening a web site I get the error "Error 105 (net::ERR_NAME_NOT_RESOLVED): Unable to resolve the server's DNS address."
If I refresh the page usually I am able to open it. I am using chrome.

Thank You

A:DNS Look up fail error

Try this:
Go to the start menu and type in CMD-->Right click on CMD, and press "Run as Administrator"-->type this in exactly: ipconfig /flushdns

Tell me if this works out.

http://www.techspot.com/community/topics/dns-look-up-fail-error.193748/
Relevancy 13.76%

Everything on the network was set up fine with sharing between all the computers and it seemed like as time went on the windows computer encountered more and more problems One of the xp computers suddenly required a password to access the windows computer Windows suddenly couldn t access any of the other computers but you could still push files to it from the other ones But now I cant push any files to the windows computer or Between other Networking computers Error Windows and 8 all access any of the windows or xp computers files from the windows comp I get an error message saying Network Error Windows cannot access insertnamehere insertdrivehere You do not have permission to access insertnamehere insertdrivehere Contact your network administrator to request access I get this error message through both windows and and xp Networking Error Between Windows 8 and all other computers gives a cannot access error But I can see the drives I wish to access and the computers themselves I just cannot get into the drives even though all my permissions seem to be set properly If anyone can help it would be appreciated nbsp

A:Networking Error Between Windows 8 and all other computers

First it is a big time security hole to allow shared access directly to a drive

Windows cannot access \\insertnamehere\insertdrivehereClick to expand...

Sharing should be to a directory such as

\\systemName\publicFolder or
\\systemName\personalDocuments
Sharing has two major components:

Hopefully your XP is SP3 which has the LLTP service necessary for Win/{7&8}. If you have XP SP1 or 2, then find the LLTP update for it.

Before we go crazy, you mentioned

any of the other computersClick to expand...

so verify that all the other systems can share with each other (ie ignore Win/8) in both directions A can share with B and conversely. This will ensure the systems are configured correctly AND that the firewall is not a problem.

http://www.techspot.com/community/topics/networking-error-between-windows-8-and-all-other-computers.192500/
Relevancy 13.76%

Hellow guys again ,, hello the best website ever !!!
I jus wanna ask about something ,, Earlier I mentioned something about upgrading my processor to core 2 duo ,, now ive done that but when ever I start my computer ,, this msg shows up !
""" 1801 - microcode update Error
Missing or invalid processor microcode update. please contact hewlett-packard company for a new microcode update to support the new processor stepping """
Any help ?
HP compaq dx7300 microtower is my pc and Intel core 2 duo E4500 @2.20GHz is the new processor.

A:Microcode update Error ?

Have you tried contacting HP concerning it?

http://www.techspot.com/community/topics/microcode-update-error.191974/
Relevancy 13.76%

I have a asus a8n delexe sli which gaves the above error when I do alt f2 on post to enter the flash utility. I was driven to reinstall bios or upgrade it because I am getting freezing; reboot issues; missing drivers; unrecognised hardware issues etc. I have swapped out drives, video cards, reinstalled OS and even swapped PSU to no avail. So has my motherboard just had it?
I folllowed asus instructions and copied the bios to a floppy disk and tried to flash from that. Although I copied all three files in the downloaded zip so I presume it would select the exe file automatically. I will download again. Should it work if I copied to a blank CD? I presume the bios would automatically pull the exe from any device besides the hard drive? I get this error with or without the floppy inserted?

A:BIOS image file check sum error

Did you finally get this solved?

http://www.techspot.com/community/topics/bios-image-file-check-sum-error.190931/
Relevancy 13.76%

I have a Dell Studio 1737 Windows Vista Home 64 Service Pack 2. All of my drivers are up to date and I have the most recent BIOS.

I get this error message in my event viewer a couple of time an hour:

Source: ACPI
Event ID: 13

: The embedded controller (EC) did not respond within the specified timeout period. This may indicate that there is an error in the EC hardware or firmware or that the BIOS is accessing the EC incorrectly. You should check with your computer manufacturer for an upgraded BIOS. In some situations, this error may cause the computer to function incorrectly.

Also, when my computer is unplugged from the AC and running on battery power the system lags a lot and after about 15 minutes its turns off without warning.

I feel like this is all connected. Any advice?

Thank you!

A:ACPI error Event ID 13

This could be caused by a failing hard drive

http://www.techspot.com/community/topics/acpi-error-event-id-13.190645/
Relevancy 13.33%

I have a HP LaserJet Earlier this week I was using my laptop with a phone and an external hard drive both connected to the laptop HP power printer 2430 since error surge will USB LaserJet print not through USB connectors However when I connected the HP LaserJet using a printer cable with HP LaserJet 2430 printer will not print since USB power surge error a USB connector I received a message that said USB Power Surge Error or something similar Since then I have not been able to print I bought a new printer cable and it still does not work I ve been able to use the USB port on the laptop by connecting other items and they work fine so that s not the problem I am able to use the Menu button on the Printer to print out the Printer Info such as configuration page usage page etc However I can not get the Printer to work via a Printer Cable I keep receiving an error that says This document failed to print Is it possible the port which accepts the cable on the printer is damaged My family uses this printer on a daily basis Any assistance with this issue will be greatly appreciated Thanks Rachel nbsp

A:HP LaserJet 2430 printer will not print since USB power surge error

I forgot to add that the printer previously worked using this USB Printer Cable for years prior to this.

I'm still looking for help on this. If anyone has any knowledge regarding this, PLEASE let me know.
Thanks!

http://www.techspot.com/community/topics/hp-laserjet-2430-printer-will-not-print-since-usb-power-surge-error.189947/
Relevancy 13.76%

I keep getting DNS errors when trying to use the internet on an iMac on my network. The DNS errors sort of come and go. RIght now it's fine, but 5 minutes ago it wasn't. It keeps happening. Now that I think of it, this iMac sometimes also has issues connecting to the internet. One second it's working, then suddenly browsing the internet just times out. Again, every other computer on the network would work fine though.

I'm behind a wrouter that's connected to a modem. How can I begin to figure out what's the issue?

A:DNS error on one computer in network

Which OS X are you using? Try flushing the DNS cache: https://support.apple.com/kb/HT5343

http://www.techspot.com/community/topics/dns-error-on-one-computer-in-network.191162/
Relevancy 13.76%

Hey Just signed up to hopefully find Answers Here comes the crazy Ok a few days ago My computer would not load ANY Websites in Any of the Browsers I couldn t even connect to my router which seems VERY strange Luckily I had my laptop right next to me however this was working perfectly fine It had no problems establishing a connection So That led me to believe I may have a faulty Ethernet Cable after testing it via different Computers and Laptop it was obvious it wasn t the Cable So I could only come to the conclussion I might of had a DNS Error somewhere So I changed the DNS adress to OpenDNS However this also did not fix the problem I have tried using a specific IP Unexplainable error network and this doesn t fix it either So In a Final effort to find out what was wrong I disabled my AntiVirus AVG and still it isn t fixing the problem I know that my router itselfs works as I can download perfectly fine on this computer and Apps such as Steam work perfectly Its just connecting to Websites Which my laptop can do I am With SKY I am at my limit I have no Unexplainable network error clue what is doing this Everyone I talked to has no idea Even my University Computer Lecture is baffled All I know is that My computer hates me PS The only solution to fix this is a reboot I have tried various Anti virus and malware detectors They find nothing nbsp

A:Unexplainable network error

What OS are you running?

http://www.techspot.com/community/topics/unexplainable-network-error.190526/
Relevancy 13.76%

My computer has computer error screen like this the picture I attach and it keeps on coming back after I restart my computer. sometimes it will start normally and then I viewed the event viewer there are a lot of errors, criticals, warning and etc. what shall I do? I don't even know how to fix this please help me thanks

A:My computer has an error screen

Lol. What's that? A photo of your monitor?

If yes, monitor could be dying. Or graphics card...

http://www.techspot.com/community/topics/my-computer-has-an-error-screen.190154/
Relevancy 12.04%

Ok here s the history of the problem I have GB Hard drive quot Samsung sp c quot and I am using it since two years with my old desktop system with this S M A R T error at the startup BIOS TWO YEARS BACK I think there are some bad sectors involved at the last part of the HDD space There were partitions initially I e C D E amp F The problem started with partition #83" attribute "1720-SMART failure failing? drive detects imminent hard failed: ... HDD error F with following issues Always took so long copying files into F System got stuck up when some file s folder s from F drive were opened and then automatic restart That time ran CHKDSK on F drive but in the middle of scanning it always restarted the PC automatically Sometimes system restarted when I was copying some HDD error "1720-SMART hard drive detects imminent failure attribute failed: #83" ... failing? random data in the F partition Whenever this restart thing happened at the start up it displayed that there is no primary hard drive detected Then eventually it came back live after - attempts always I also deleted the Partition F and then recreated the partition but same problems persisted YEAR BACK Due to above issues HDD error "1720-SMART hard drive detects imminent failure attribute failed: #83" ... failing? I left the partition F as it was and used others like C D amp E but an year before the partition E started to do things same way F was doing and at that point F was not accessible with error popping The disk is not formatted Do you want to format it now I formatted the partition F and ran following HDD tools afterwards Partition Table Doctor HDD Regenerator Surface tests for C D E was fine but when it started scanning the HDD somewhere in F partition area these tools messed up with something took so long stuck at sectors for long time without repairing it MONTHS BACK I came to know that there are some serious issues in the HDD sectors inside the last GB part of HDD error "1720-SMART hard drive detects imminent failure attribute failed: #83" ... failing? the hard disk I made partitions C D E F G The G partition was for GB space and I never opened this drive since I created it because this will cause same problem what the F was doing before NOW I don t have much issues with C D E amp F while operating them Don t use F too much to be at safe side But I feel that HDD is very slow overall and and every time I turn this system on I get quot -SMART Hard Drive detects imminent failure Attribute failed quot Wondering if it could be fixed or not and I know and understand that my hard disk was failing ever since and most of you guys will advice to back up and purchase a new one but I am still on to fix this one and as if there s any way to get it right up Many Thanks nbsp

A:HDD error "1720-SMART hard drive detects imminent failure attribute failed: #83" ... failing?

The fundamentals still apply:

for every partition ?X?
chkdsk ?X? /f /r​
The /R will remap bad sectors in an effort to avoid future I/o errors.

a} fix all partitions
b} get the SMART data and save it for reverence (it will not be reset to zero by chkdsk)
c} view the SMART data every day
d} look for increasing statistics

PLAN on getting a new HDD asap

http://www.techspot.com/community/topics/hdd-error-1720-smart-hard-drive-detects-imminent-failure-attribute-failed-83-failing.190152/
Relevancy 13.76%

I recently built a pc with a fx 6100 8gb ddr3 and a 7850 in a nzxt phantom 410. and I'm getting what I think are good temps my gpu reaches 50c in load, and the cpu says relatively cool but on speed fan it says the aes says it's like 90c. So what is this aes and do you think these temps are correct. I believe this could'nt be correct, because I have my fans at 100% and I would like to see what you guys think 2. Ill upload gpu-z cpu-z and speed fan diagnostics later today.

A:Weird temp error? (hopefully)

Do not use Speed fan to monitor temps. Use Core Temp or HWmonitor and then report back.

http://www.techspot.com/community/topics/weird-temp-error-hopefully.189984/
Relevancy 13.76%

New system just built a week ago:

Asus P8Z77-V Pro
i7 3770K
F3-12800CL9D-8GBSR2 DDR3-1600 8GB(4GB*2)KIT CL9 1.25V
GIGABYTE GTX670 2GB OC PCI-E WINDFORCE3X GV-N670OC-2GD
OCZ Vector 2.5" 128GB SSD Indilinx Barefoot3 HD1237 VTR1-25SAT3-128G
Windows 8
The problem is, every 2nd or 3rd time I boot up I get a message by that white flag on the bottom right with a red X on it saying 'restart your PC to repair drive error (Important).

I have attached two screenshots at the bottom showing the messages I get within windows, then a short video of what happens when it reboots.

A:Restart your PC to repair drive error (important)

I'm not familiar with SSDs. It is safe to run a check on it, and what software would you recommend?

http://www.techspot.com/community/topics/restart-your-pc-to-repair-drive-error-important.189187/
Relevancy 15.48%

Connect vista to wireless home network

how can I connect a vista laptop to existing wireless home network with other 3 xp machines.

I followed googled info but keep chasing my tail as all effords end trying to make an internet connection.

My router is Negear wired & wireless capable in which 2 PCs are wired & an Acer netbook wireless connected, all 3 XP machines.

Hewlett-Packard Compaq Presario CQ61 Notebook PC
2.00 gigahertz Intel Pentium Dual-Core
160gb HD, 3GB Ram
32 operating system

A:Connect Vista laptop to XP wireless home network

How to connect to a wireless network in Windows Vista.

Come back if you have problems.

http://www.techspot.com/community/topics/connect-vista-laptop-to-xp-wireless-home-network.189516/
Relevancy 15.48%

The system I m working on is a Medion prebuilt running Vista Home Basic not on any service packs as of yet as I ve been too busy trying to fix this problem first I believe it s profiles deleting restart network Vista wireless saved on a Celeron D on GB of RAM but I m not sure Recently purchased a Dynamode I know it uses Vista deleting saved wireless network profiles on restart a Realtek chipset n wireless adapter so it could connect to the net and share its printer to a laptop on the same network There is a Realtek utility on the system but I ve set it to use the Windows networking as I thought this would be easier so this isn t running on boot I can add the wireless network and it connects fine I can verify it is in the Manage Wireless Networks section and it is set to automatically connect when in range When I restart the PC the entry disappears from Manage Wireless Networks and the PC does not reconnect It is set to save and automatically connect when I add the network each time When it s connected it works fine I m stumped Any ideas nbsp

http://www.techspot.com/community/topics/vista-deleting-saved-wireless-network-profiles-on-restart.189511/
Relevancy 13.76%

Every time I start up my laptop, I get this window that pops up and it saids

<Error>
An error has occurred.
ERROR : F3-F100-0004
An error has occurred.
Please press [OK] to turn off the computer.

That is all I get every time I turn it on.
It is a Toshiba Windows 7

-Shamu

A:Error F3-F100-0004

Are you seeing the bios screen before this error appears, if so start tapping the F8 key from the instant that you power on. See if it will run in safe mode.

How old is the PC?

Were you attempting to use the recovery options before this happened? If so read this: http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=194865

Do you have a Recovery disc or a Windows 7 disc?

http://www.techspot.com/community/topics/error-f3-f100-0004.162440/
Relevancy 19.35%

Hi there!

Straight to the point:

Tablet specifications:
- Manta Tablet PowerTab 10" HD MID1001
- CPU - Cortex A-8 1.5GHz
- GPU - Mali-400
- 3D OPEN GL V2.0
- Ram 1GB
- Android ver. 4.0.4
- compile number - crane_axmid-eng 4.0.4 IMM76D 20120803 test-keys
- kernel 3.0.8+ [email protected] #52

Problem:
- slow page load (if any!) - tested on default browser, chrome, opera, opera mini, etc etc

Thoughts:
- not a router problem (802.11n WPA2/AES)
- other android devices working well on that hotspot
- Google Play working well on tablet, no lags, no interference (same other online soft - skype etc)
- tried system restore, default settings, changing router settings

Techspot is my last hope. Help me!

A:Slow browser failing to load pages on tablet

Check the advanced setting for the Wifi, there may be some weird DNS entries or something.

Relevancy 13.76%

Hi I m a new member I recently decided to build my first PC Parts were Asrock Z Extreme MoBo Intel i K - LGA DDR Single stick GB G-Skill GeForce GTX GD OC Seagate Barracuder SATA TB w PSU Now for the problem - BIOS error Extreme update Z77 4 Asrock I installed everything correctly and got to POST so I decided to follow most Internet forum instructions to update my BIOS so I did so over the Internet flash update from the AsRock BIOS setup The problems arose after trying to update it via the Internet Now the motherboard won t even get to POST or show any signs or working Asrock Extreme 4 Z77 - BIOS update error on a monitor the fans for ten graphics card CPU and chassis all work the PSU is working fine But the Dr Debug is showing the status code which states in the description is that it is quot not used quot I don t know what to do iv taken out the graphics card and tried still the same disconnected everything except the socket and all pins are fine on the PCIe slots and RAM Any help would be appreciated ps I have a spare Gigabyte gt GB hanging round and was wondering if I can get the MoBo to work will it be worth sticking the in with the for any improvements however slight until I can afford another for SLI nbsp

A:Asrock Extreme 4 Z77 - BIOS update error

"Now the motherboard won't even get to POST or show any signs or working on a monitor" You might be able to get the motherboard to respond by removing the battery for a few minutes. If not, the motherboard may need to be replaced

http://www.techspot.com/community/topics/asrock-extreme-4-z77-bios-update-error.188524/
Relevancy 14.19%

Hi everyone I ve been having a strange A55 error Z77 Asrock issue since I cleaned my PC this morning When I booted up my PC after cleaning I got an Error which signifies that no memory is installed detected I m using two identical GB sticks of GSkill Ripjaws Asrock Z77 error A55 MHz and both were correctly installed in slots A and B So I switched out the sticks and put them in slots Asrock Z77 error A55 A and B and the system booted up just fine I shut the system down and switched the DIMMs back to their original slots A B and now the computer again booted successfully I played Hitman Absolution for about an hour then turned off my machine and went out Just reached home and started up the system All was fine till I again started the game and it crashed with a BSOD On reboot I again got Error Did the same DIMM switching procedure and all seems well again Any pointers as to what might be wrong I ve used the system without issues for months and suddenly this nbsp

A:Asrock Z77 error A55

Maybe something went wrong with the RAM. When you say you cleaned it, were you talking about dust or cleaning out temp files and the like? If dust, maybe there was some stray static that zapped something. Anyway, see what happens if you leave the RAM in the A2 and B2 slots and play games. Up to now you've only just booted up and then switched them back.

http://www.techspot.com/community/topics/asrock-z77-error-a55.187530/
Relevancy 15.91%

Hi, I am trying to connect my Macbook Pro to my old Vista PC over ethernet cable but I can't get them to connect. I set up static IP's on both and the PC can ping the Mac but the Mac times out when I try to ping the PC. I even had the Windows firewall turned off. I had already turned on SMB connections in file sharing. They connect fine over wifi but I want to transfer 50gb of files faster.

Thanks.

A:Can't connect to Windows Vista PC from Mac over Ethernet

From what you're saying, it sounds like you're just connecting directly using only an Ethernet cable. However, in order to connect two computers directly, you'll need to use a crossover cable (Ethernet cable with some wires changed on one end). You also have the option of using a network hub or router in between.

Respond if we can help any more. I could be understanding your situation wrong as well.

http://www.techspot.com/community/topics/cant-connect-to-windows-vista-pc-from-mac-over-ethernet.187116/
Relevancy 20.21%

Hi I recently bought a blackberry phone (at&t) and unlocked it in jamaica (to use all networks) but even with my plan on it says "your device does not currently have any browser configuration service book"
and that I'm to check with my service provider to enable the browser.
Digicel (service provider) has sent this over 15 times and still no success I cant get on to the browser at all to select options or got o or so forth.

It's a bold 9000 and I've checked the time, did battery pulls, wipe the phone, update the OS to version 5 and still no success.

I can use BBM on my plan and check emails so the plan works and opera mini works on wifi but not on plan, the browser doesn't work at all.

A:Blackberry browser won't work

Remove and re-install the battery. Or restore the Blackberry to factory settings if you can

http://www.techspot.com/community/topics/blackberry-browser-wont-work.186700/
Relevancy 15.91%

Hi all
I have a small home network with 3 computers and 1 network printer with a BT Home Hub 2 router.
Computer 1 is PC with Vista home premium sp2 connected by Ethernet.
Computer 2 is PC with XP sp3 connected by Ethernet.
Computer 3 is laptop with Ubuntu 12.04 connected by wireless.

I can see and access everything from C1 (Vista).
I can see but cannot access C1 (Vista) from the other 2. I cannot ping Vista from either of the other 2 and have tried to allow pinging by setting various ICMP settings for this to no avail.

On C1 (Vista) I have Windows Firewall on
Vista settings for Network are:
Private Network
Network Discoveryn
File Sharingn
Public folder sharingn
Printer sharingn
Media sharingff

I am pulling my hair out!
regards
Steve

A:Vista not accessible on home workgroup

Ping only tells you that the adapter ALLOWS ping and the system is up; no mapping or access is implied.

ALL systems must be on the same WORKGROUP name,
ports 137,138,139,445 must be open

the XP machine needs the LLPD protocol and library installed
Link Layer Topology Discovery (LLTD) Responder (KB922120)

Vista --> Linux
see this story

Linux -->Vista is an Samba config issue

http://www.techspot.com/community/topics/vista-not-accessible-on-home-workgroup.185961/
Relevancy 13.76%

Hi I have a toshiba laptop satellite a15-s157 and a black page comes and says 1DE number 1 error

A:Toshiba Satellite a15-s157 error

Sorry there mate, your choices in the Poll make no sense to me . . .

http://www.techspot.com/community/topics/toshiba-satellite-a15-s157-error.185453/
Relevancy 13.76%

Hi guys,
I am running ASUS M2N68-AM PLUS motherboard. SOCKET 940 ON xp
Ive installed a Gigabyte HD 7770 Graphics card. I installed it according to instructions. The card is getting power but after installing it with the CD that came with it, it keeps saying cant detect drivers for this device.This is obvious because of the display Im getting.
Wouldnt be a compatability problem could it.?

Any ideas guys
Rob777

A:Functioning error after installing video card

Hey Rob, pardon me but I'm a little confused of what you've said. It says here that you have the ASUS M2N68-AM Plus Motherboard and yet, it still on the classified Socket 940? Not to mention that mobo is running both Socket AM2/AM2+ already. That's a long road for that architecture.

Therefore, you shouldn't be having problems with that Radeon HD 7770 of yours, because it's totally compatible with that motherboard; Unless you have checked inside the system unit if it has been connected properly.

http://www.techspot.com/community/topics/functioning-error-after-installing-video-card.179902/
Relevancy 15.91%

I have a windows vista laptop and had a external tv connected to it and it worked.
I now have a new tv and cant get an output to it.
connected via a vdu cable as it was before.
and can get an output if I start the laptop in safe mode so I know the connection is ok.
any ideas?
Barry

A:Problem with extra monitor for Vista laptop

Did you get this working?

http://www.techspot.com/community/topics/problem-with-extra-monitor-for-vista-laptop.183152/
Relevancy 13.76%

Hello helpful people of TechSpot I m creating this thread because my graphics card is reoccurring problem This problem occurs on multiple occasions I am sure loading a game Civilization V Starcraft is causing this to occur but in the past I think Video error hardware running multiple applications web browser music application games has also had the same effect This error isn t constant I have had multiple occasions where I can load multiple apps or a game as mentioned and have no video hardware error at all The only other thing I can report is before I installed my new graphics cards see specs below I had another card that I swapped out The software is still installed but I figure that doesn t effect my current graphics card I have installed the software for my new graphics card using the CD software but I fear something may have gone awry My specs are Graphics Card ASUS HD -DC TG- GD -V Radeon HD GHz Edition Motherboard ASRock Z Extreme Gen LGA Intel Z Processor Intel Core i - Sandy Bridge GHz Here is a log of my most recent hardware error Source Windows Summary Video hardware error Date PM Description A problem with your video hardware caused Windows to stop working correctly Problem signature Problem Event Name LiveKernelEvent OS Version Locale ID Files that help describe the problem WD- - dmp sysdata xml WERInternalMetadata xml Extra information about the problem BCCode BCP FFFFFA Video hardware error BDF E BCP FFFFF C BCP BCP OS Version Service Pack Video hardware error Product I am wondering if anyone has any suggestions on what I should do to fix this reoccurring problem In addition a less significant question Am I able to uninstall past video card software I am wondering this because I have gotten rid of my older graphics card as mentioned above and I would like to uninstall the software because I no longer need it Thanks a ton nbsp

A:Video hardware error

Are you saying you left the software for the other Video card install.. This would mean the drivers to. If this is the case. and I am understanding you right. If so this may very well be your problem. I would uninstall the software for the old video cards software and drivers.

http://www.techspot.com/community/topics/video-hardware-error.184185/
Relevancy 16.34%

Hi. Since a recent malware infection I have been unable to access one of the PCs on my home network. The PC shows up in the Network device list and maps but I get the 0x80070035 error message when attempting to connect to it. I can't ping it from either of the other two machines on the network even with its firewall disabled. I have searched many forums for a solution and followed all the recommended courses of action but have so far been unsuccessful. I have full access to the network from the problematic machine. Any help would be greatly appreciated.

A:Cannot access Vista PC on LAN

get a command prompt and enter EVENTVWR.MSC
open the SYSTEM LOG and look for ERROR events
Find the first one, double click to see the details
*IF* it is your 0x80070035 error, click the little document icon below the down arrow
the content

http://www.techspot.com/community/topics/cannot-access-vista-pc-on-lan.184218/
Relevancy 13.76%

I have no sound on my PC . I used to have before but I don't have now . Any ideas :S HELP

I ran msinfo32 and found this error :
Realtek Ac '97 Audio Pci/Ven_878 etc... This Device cannot Start

A:Realtek cannot start error 10

What are your PC's specs? A desktop or laptop?

http://www.techspot.com/community/topics/realtek-cannot-start-error-10.184217/
Relevancy 15.91%

I ve been troubleshooting this one all day If anyone can give me some insight it would be much appreciated Just built a new boot not Vista on or drive reading DVD in system ECS Black deluxe mobo i - GB ram took the other out to trobuleshoot thermaltake SP- M psup and a DVD drive not reading on boot or in Vista LG ODD MOBO link http www newegg com Product Prod Power Supply DVD drive not reading on boot or in Vista http www newegg com Product Prod SP- M I DVD drive not reading on boot or in Vista can t get the DVD Drive to read my windows boot disc I ve installed a Vista HDD from another machine which boots fine and runs everything except for the ODD The ODD does respond to eject commands from Vista I ve tried plugging it in to multiple SATA ports and switched the SATA cable with ones I know to be good from the HDD I ve also tried using the Vista install disk for kicks but no dice there either More than that I ve tried swapping the DVD Drive with a known good one and I get nothing out of it Any ideas Am I missing something with the way the SATA cables connections have to be configured nbsp

Relevancy 13.76%

Hi to all. I am not sure if this is the correct board to post my problem to! I apologize if I am wrong.

I save my picture albums in external storage device. Its the memory of an entire lifetime, my school, highschool and all. Now I opened it after many days to find that many of the JPEG files are showing 'X' although their properties are showing appropriate file size. If I try making a slideshow, it says 'No preview available'. I have tried opening it with MS Office Picture Manager and Adobe Photoshop 7 but of no avail. I have tried to look it up on google and tried repairing the images using a few free online picture repair tools, but it says no data available or something. Please help me resurrect those images. I dont understand what could possibly go wrong with them! I use Windows XP home. They are very valuable to me.

Thanks in anticipation.

A:JPEG file error

can you open ANYTHING on that external device?

http://www.techspot.com/community/topics/jpeg-file-error.183222/
Relevancy 15.48%

Hai,
I am facing the problem of mouse pointer moving by itself without any control, on my Windows Vista laptop. The pointer is moving to the right-top corner of any open window and placed on the 'Close' (X) button and if mouse is clicked or Enter key prressed, accidently closing the active window. I tried many anti-malware and anti virus tools as per the same issue posted in Virus and Malware removal section here.While doing the steps according to the replies everytime, first it looks like the issue is solved but it is still there when the system is restarted. Please help me on this problem which is causing lot of nuisance and disturbance for my work. Thank you.

Regards,

A:Cursor moving by itself erroneously on Windows Vista laptop

It doesn't happen often, but the laptops touch pad may be waring out or is dirty. I have replaced physically broken touch pads with the same symptom as you describe here

http://www.techspot.com/community/topics/cursor-moving-by-itself-erroneously-on-windows-vista-laptop.165754/
Relevancy 12.04%

Pls anyone who can advise me on how to fix this minor issue.. So I had a windows welcome tune whenever I on my PC.. but after a few minutes, there are no sounds when I watch online or some movies on my pc.. and when I click the audio icon on taskbar, it states that there are no active audio mixers.. So I just go to services.msc and windows audio then start it, then everything's fine.. not until I restart my PC.. it is set to Automatic but it just stops on its own after every restart.. I thought of having a system restore but afraid of what might happen.

http://www.techspot.com/community/topics/there-are-no-active-audio-mixers-error-despite-having-a-functional-hardware.182911/
Relevancy 13.76%

My fan recently broke. So I simply jus popped another one on. The fan I replaced it with jus has red and black which is obv live and neg but the one I took out has red black and yellow any idea about the yellow ? The fan works great but CPU fan failed error keeps appearing then when I press F11 it says entering setup but still shuts down.any ideas about how to keep it running just to get into the settings and change the CPU fan settings. Would be grateful with any help. Thankyou.

A:Help needed to bypass the CPU fan failed error at startup

You bought the wrong type of fan. They aren't all the same. You should have bought a CPU fan but you have a case fan instead. The yellow wire goes to a sensor connection that controls the speed of the fan. The motherboard detects the missing connection and throws the error you saw. The solution is to buy the correct type of fan.

http://www.techspot.com/community/topics/help-needed-to-bypass-the-cpu-fan-failed-error-at-startup.170008/
Relevancy 13.76%

Hello,

I've just changed my internet from wireless to wired using a D-Link 2780 modem connected to a gigabyte SP2612R Network Adapter.since then I have had nothing but problems.

Youtube will not play videos - it's just the rotating timer circle all the time. IE 8 opens to a Diagnose Connection Problem even though connection is good - if I then search anywhere there's no problem.

Various Websites give me a 'Diagnose Connection Error' usually https sites.

I've run a Malawarebytes scan which found one issue which was fixed. But still the same annoying issues.

I using Windows XP and I connect with TALKTALK.

Any help is greatly appreciated.

Thank You

David

A:Diagnose connection error

Sorry - I copied a Hijack this log and Malawarebytes in this post but it doesn't seem to have copied correctly. I've now uploaded these logs.

David

http://www.techspot.com/community/topics/diagnose-connection-error.180820/
Relevancy 14.19%

Recently, I had a problem with my laptop's harddrive(?). Whenever I ran a file, it would usually stall/lag, or freeze. May it be a song, picture, application or whatever, it takes hours to load or sometimes it just goes not responding.I can't even copy files from second to primary partition or vice versa (takes 15min to copy 30mb of files? & ends up with)
0x8007045d​Cleaned registry(CCleaner), antivirus(Avira) scanned, MBAM scanned, Chkdsk /r'd, and even though it is a little better than before, it's still messed up. Can hardly get anything to run, what do you think could be the issue?
OS : Windows 7 Ultimate 32bit
It didn't ever happen before so I don't really think it's about system specs, and I don't really remember installing anything since yesterday (that's when it all started)

A:0x8007045d I/O error

The laptop has a self diagnostic test in BIOS, so I just ran that and yeah it's failing with some error codes.
I even formatted and all before checking with that but nope no luck, it's still lagging.

Would had drive solely cause this problem or could there be something wrong with the memory as well?

Update:
Windows won't let me format my second partition

http://www.techspot.com/community/topics/0x8007045d-i-o-error.180103/
Relevancy 14.19%

hi all,

A:VPU error

First off, welcome to TechSpot, second, I don't have that much experience dealing with VPU error's. For those types of error's are normally caused by ATI video card software. I've been a strict Nvidia only guy, so VPU error's, never had any!

But your question might gain greater traction if asked inside our "audio & video" section, I'm providing that areas link.

Good luck...

http://www.techspot.com/community/topics/vpu-error.179721/
Relevancy 13.76%

Hi,

My L500 fan is no longer working correctly

I am getting this message

Warning:a problem with the cooling system has been detected. please turn off the computer immediately, and return it for service.

The fan runs inconsistently (always for a few seconds on start-up, very sporadically the rest of the time, but it is completely stationary for the most part.

The computer is currently in pieces, and I am ready to replace the fan with a new one, however im not sure that will fix the problem (as the fan still seems to sometimes run).

Thread Name - 'My Toshiba Satellite l500 cooling fan has stopped working'
This closed thread had a post at the bottom by kristain, has anyone else encountered and resolved something along these lines

A:Toshiba Satellite l500 cooling error

Are you going to replace the fan or the entire cooling heatsink and fan? Was the heatsink clogged with dust? Keep in mind, this also may be a motherboard issue

http://www.techspot.com/community/topics/toshiba-satellite-l500-cooling-error.179149/
Relevancy 15.48%

So recently my Windows laptop went all wack and crushed into it s self so i went and pulled out one of my old laptops and booted it up to Windows problems Vista Toshiba keyboard/trackpad see if it still worked it is currently a Windows Visa and i plan to change the system soon anyways i started it up Windows Vista Toshiba keyboard/trackpad problems and everything ran smoothly till i got to my login screen and the keyboard mouse pad dont work so i decided to plug a USB connect keyboard and mouse in and those dont seem to be working either i havent used this laptop for a good years almost now and im not entirely sure whats going on even when i try to restore it i cant click on restore in order to do so any suggestions of any sort would be a great help to me either that or im going to have to take it in to be repaired and i just recently replace the hard drive in my laptop that crushed into it s self so i wont be exactly thrilled if i have to pay for it to be repaired Computer Toshiba Satellite L - Laptop System Windows Visa Home Edition Thanks Natasha PS yes i just noticed the spelling mistakes in the title but its an odd computer im currently using so not entirely use to it yet its a loner from a friend nbsp

Laptop keyboard issues?

Hi, Could be one or more problems here, but for a simple test, if the laptop has more than one USB connector, try each of them, with the extra keyboard, as it's possible the first one you tried isn't working. I have the same problem with an old HP, two out of three don't work.
Try just the keyboard plugged in, not a USB mouse at the same time.
If you get no response from the keyboard in any of the USB sockets, then it's most likely that the Windows software is not 'seeing' the keyboard.
When you first power on the laptop, do you see the white text on black background, such as 'Windows Vista' etc, then it goes to the Vista login screen ?
If your laptop is the type where it has the same Windows on as it had when new, then you may be able to do a 'Factory restore', but if the keyboards won't work, then it won't be so simple.
If it was mine, I would try a Linux CD in the DVD drive, and see if it works using that instead of Windows. That would prove if the hard drive is ok, and if the keyboard works (or not.)
If you don't have Linux CD, and you don't mind spending £5.99, you get them included with magazines such as 'Linux User'. If that does work, then you can save any files, mp3, videos, etc on the hard drive, off to a USB flash stick or external USB hard drive.
(It's not difficult, you just put the Linux disc in the drive and re boot the laptop, it will do the rest. You will end up with a different desktop, but it's not changing or using your Windows Vista at all, it won't damage it.
You may need to change the 'boot sequence' in the BIOS to force the DVD to be first, but it's fairly easy to do.)
If you find the mouse/track pad, and keyboard work, you will know the laptop's hardware is ok, and the fault really is with the Windows Vista software.
Hope that helps.

Relevancy 13.76%

Hello everyone

I'm having a problem with my DVD burner... actually I've had it for almost two years now, but I only decided that enough is enough with this thing and I want to find a solution for it.

The long and short of it is this. Whenever I try to burn something on my DVD, it fails at the end and gives me an 'input/output' error and ejects the DVD. I have no idea why this happens. I should note that my DVD drive is fine otherwise, it can play DVDs and CDs without any problem. If anyone needs any additional information, I even saved the log-file that the my DVD burning software saved after it was finished.

Can anyone lend a hand? Thanks in advance.

A:Input/output error when burning DVDs

What software are you using? Try CDBurnerXP, it's free.
Also, try a different manufacturers DVD's.
And you could look for a firmware update for the drive.

http://www.techspot.com/community/topics/input-output-error-when-burning-dvds.177467/
Relevancy 13.76%

Hi somebody can help me ? when i try to install soundmax appears
The audio driver files do not support your computer hardware
Note: if you uninstalled audio software without restarting your PC restart now then run this setup again.
But this driver i had it before reboot my pc and now it doesnt work.
My audio is integrated in motherboard and the motherboard is asus p5lo2.
Thanks!!

A:SoundMax installation error

http://drivers.softpedia.com/get/SO...us-Realtek-ALC882-Audio-Driver-51005125.shtml

http://www.techspot.com/community/topics/soundmax-installation-error.178195/
Relevancy 13.76%

hi guys I'm wondering if anyone would happen to know what the led codes for this card are I get one flash on the top led then 2 quick flashes on the bottom then the bottom stays lit, I get no signal from the card. I have emailed asus with no reply

A:HD 3850x2 error codes

The codes must be in the installation manual.

http://www.techspot.com/community/topics/hd-3850x2-error-codes.177981/
Relevancy 13.76%

Hello, it is the first message I have gotten along with messages that say that failure is imminent. I am backing up the computer, but I need advice on how to fix it and it it is possible that the error will just "go away"

A:First error message HM641JI on Sony VAIO

I thought I might give more info...it's a Sony vaio f series and the error is with the Samsung hm641ij and I haven't switched in the computer since lat night.i am using my phone. Thank you again for any help

http://www.techspot.com/community/topics/first-error-message-hm641ji-on-sony-vaio.176299/
Relevancy 13.33%

Hi everyone In need of help Started up my Dell laptop and I am 1737 2000-0321 display on laptop, Error Dell Blank greeted by a blank screen though the machine goes through the motions of starting up I do not see any faint ghosting When connected to an external monitor all works fine and I have tried changing the inverter but Blank display on Dell 1737 laptop, Error 2000-0321 no luck Ran a diagnostic check and receive the following Error Code Msg Error Code - Msg LCD EDID - Unable to access EDID EEPROM I also tried holding the quot D quot key and powering up The LCD flashed a series of solid color screens Red Green Blue White Black I assume that this means that the backlight is good Does it also mean that the cable is good Not sure what else to check I am guessing that it is eiter the LCD screen controller board itself or the cable Any advice I am comfortable replacing parts Prior to this everything was working fine The display had even brightness and color Would anyone be able to restore my sanity and offer some words of wisdom guidance Would be much appreciated Many Thanks nbsp

A:Blank display on Dell 1737 laptop, Error 2000-0321

Replace the LCD panel including the backlight. External monitor okay, motherboard is okay... Slight chance of a damaged LCD cable to motherboard

http://www.techspot.com/community/topics/blank-display-on-dell-1737-laptop-error-2000-0321.176322/
Relevancy 15.05%

I just received a Dell Inspiron 1420 and it did not have an OS on it. I installed Windows Vista Home Premium which was the original OS on the laptop. Everythng seems to be working fine however the touchpad freezes. The buttons work fine.

did you run Windows Update?

Relevancy 15.48%

I am trying to help my sister-in-law with her laptop issues. She has a Gateway that runs Windows Vista. The computer states that is connected to the internet, we have tried both wireless and an actual cable connection, but we can not surf the internet. We have tried the internet settings options, I ran her antivirus(AVG) and no luck.
I do however remember her stating that she had virus at one time. Her AVG had not been ran in over 6 months.
I even downloaded something called WinsockxpFix on my desktop, put it on a cd and then tried running it on the laptop. It didn't help.
I am not very computer tech savvy, but she doesn't have the money to take it in and have a professional look at it.
Any idea's?

A:Gateway laptop/Windows Vista Internet issues

go to device manager. Are there any explanation points/marks next to the Wireless/Network?

http://www.techspot.com/community/topics/gateway-laptop-windows-vista-internet-issues.175510/
Relevancy 13.33%

when I start my Dell laptop Inspiron 1720, I get an error "Disk read error, press ctrl+alt+del to restart".
I tried formatting the harddisk using Windows 7 installation disk but am unable to do it.
Kindly reply as soon as possible.

A:Disk read error press ctrl+alt+del to restart

Sounds like you have a dead Hard Drive, you'll need to replace it.