Windows Support Forum

Trouble with chassis fan

Q: Trouble with chassis fan

Hey, I just moved my rig into a new Thermaltake case, which has about 3 huge led fans. I have 2 problems...

Most of the fans work but seem to run very slow, and particularly the fan speed control won't work.

I'm not too sure what I did wrong here, but there was one thing I noticed that was weird and wasn't in my old tower, which was a 2nd, 2-prong PWR Led lead in addition to the main power lead. I didn't do anything with it because I didn't know where to attach it to.

I have a Gigabyte GA-880GMA-UD2H Mobo, and the new case I got was this one http://www.newegg.com/Product/Product.aspx?Item=N82E16811133086

Any help is appreciated, thanks!
~Wes

Relevancy 100%
Preferred Solution: Trouble with chassis fan

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Trouble with chassis fan

are these fans plugged into the motherboard, or using a 4 pin molex?
If the MB, are the ones running slowly 3 pin, or 4 pin?

They are probably being auto controlled by the MB according to temperature. Have a look in your bios to see what temp/fan settings are enabled or disabled and how they are set.

http://www.techspot.com/community/topics/trouble-with-chassis-fan.168159/
Relevancy 54.61%

Hi In November last year I wanted to try and overclock my CPU through bios Couldn t do that Tryed doing it through windows but my cpu just wouldn have Intruded -I Chassis a chassis! don't ! t go any higher than hz without becoming unstable so I tryed Chassis Intruded ! -I don't have a chassis! to look for any vcore settings in my bios None So I looked all over the web trying to find a hacked bios for my OEM MS- board but with no luck I recently bought a new Chassis Intruded ! -I don't have a chassis! ASUS P GDC-V board and it booted up fine a couple of times then when I tryed to overclock I miscalculated and set my fsb too high I thought the c p r function would reset the settings but it didn t and by mistake I removed the chassis jumper intead of the bios reset I replaced the jumper and reset the bios and now it keeps giving me the Chassis Intruded message although the jumper is in the right place Any help nbsp

A:Chassis Intruded ! -I don't have a chassis!

Load up on your motherboard a new bios file,with asus its easy.
 

http://www.techspot.com/community/topics/chassis-intruded-i-dont-have-a-chassis.42115/
Relevancy 43.86%
Q: Chassis

Hello! i am trying to look for the complete chassis of my hp gaming  laptop i've been trying to do hp part surfer but i am not able to do find the chassis, can some one tell me where can i find a complete chassis?   thanks!

A:Chassis

Hi @WaffleWizard, Welcome to the HP Forum!Thank you for becoming a HP Forum member.  It is a dynamite location to get help from the community, get suggestions and find what has worked for others. For you have the best experience, here is a link to First Time Here? Learn How to Post and More for you to review, should you have any concerns.I grasp you are looking to replace the chassis of your notebook, but have been unable to locate it in HP Part Surfer.  I would be happy to assist you, but will need to know your exact model of Pavilion gaming notebook. HP Notebook PCs - How Do I Find My Model Number, Serial Number or Product Number?  I will wait for your reply. 

http://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/Chassis/td-p/5603149
Relevancy 43.86%

......my ''92x38mm Vantec Tornado'' has just arrived from the states, its time to fit this UBER LOUD beast to my CPU H/S

110CFM @ 55db ....lets see how loud it actually is....lol

A:new chassis fan

Haha, VERY nice Skunk. I like people who don't care how loud the system is....as long as it over clocks well !!

http://www.sevenforums.com/hardware-devices/24244-new-chassis-fan.html
Relevancy 43.43%

I get this error all of sudden and no hardware or software changes with my hp evo 510 :
512-chassis fan not detected
 

A:512-chassis fan not detected

closing duplicate, please respond at http://forums.techguy.org/hardware/973633-512-chassis-fan-not-detected.html

Please do not create duplicate posts for the same issue.
 

https://forums.techguy.org/threads/512-chassis-fan-not-detected.973630/
Relevancy 43.43%

Hey people I am wondering how to route my Side panel's fan cable's so that it does not look messy on the inside of the chassis like How to hide the cable's. Chassis : Aerocool Xpredator White edidtion : http://www.aerocool.com.tw/index.php/products/chassis/28-pgsb/138-xpredator-white and the fans are 4 Aerocool Shark fans 12 CM : http://www.aerocool.us/accessory/shark_w12.html Thanks for the help guys Cheers
 

A:Chassis fan solution

With an all clear design like that it may be hard to hide it completely. Your best bet would be to make it less visible. Maybe try bunching all the wires (or if you're okay with DIY, combine them all to a single wire) and route it towards the back of the case, and from there to the closest power point?
 

http://www.techspot.com/community/topics/chassis-fan-solution.184122/
Relevancy 43.43%

I had a bit of a catastrophe when opening my pc case. The wires and connector from my Chieftec D80SM-12 chassis fan have become separated from the motherboard. (An ASUSTek A8N-SLI Deluxe) and I don't know how to reconnect. The connector is a 3 pin with yellow, red and black wires leading into it and there are red and black wires leading out of it. Any help would be very gratefully received.
Thanks
 

Relevancy 43.43%

A few weeks ago, the (8mm?) side case fan, which has an LED light in it to help light up the inside of the computer started to blink, like multiple times a second. I was hoping it was the fan's light going bad, but I replaced it with a new (different) fan, and the same thing is happening.

What is the issue? It appears it must be a motherboard issue, but the motherboard seems to be powering everything else consistently and good.

Any help would be greatly appreciated! I'm running Windows XP if that helps, but the flashing starts pre-Windows, so it probably doesn't matter.

A:Flashing Chassis Fan?

What's the fan plugged into? Is it a motherboard fan plug? Or is it a four-pin Molex? I think I'd be wondering about the power supply. The only lighted fans I've had were so annoying that I uninstalled them immediately. There's no way to concentrate in front of the computer when it looks as if the gendarmes are coming.

http://www.bleepingcomputer.com/forums/t/55103/flashing-chassis-fan/
Relevancy 43.43%

Hello,

I don't know if I should get a bench or a chassis for a new setup. I will be playing games, and I will not be doing benchmarks.

I will have a Seasonic M12II Bronze 520 watt as my PSU, a HD 6950 Sapphire Toxic @ 6970, my current CPU and motherboard, maybe 8GB or 6GB of RAM instead of 4GB, current HDD.

Thanks in advance
 

A:Chassis or bench?

The choice is entirely down to your personal preference, but there are a few things to consider. First, do you swap out your hardware all the time? If so, you might want a bench. Which do you think looks better? A decent chassis will cool just as well as a bench, so you might as well just pick the better looking one. Also, with a bench there will be more dust buildup and greater risk of something accidentally breaking your hardware.
 

http://www.techspot.com/community/topics/chassis-or-bench.171869/
Relevancy 43.43%

I can't find anywhere I can get a new laptop chassis My current laptop chassis is damaged and has several issues with the ports and buy chassis? laptop Where new can I my computer manufacturer can't help me and even if I could ship the computer to them they'd want to be paid in full for everything I live in China so it makes more sense to just DIY it instead of paying insane shipping costs But the problem is that I can't find a compatible chassis anywhere It seems that just about nobody sells laptop chassis Does anyone know where I can find a good chassis for a quot dual-fan setup My system is an EON -S from Origin PC and it use a P HMx from Clevo as it's chassis I was told by Origin that their current chassis Where can I buy new laptop chassis? model is a P EM I can show you the inside of the unit if it helps you finding a good match for me It's just a quot setup with twin fans that bring in air from the bottom and blow out the back One is a large fan and one is smaller The large one is for the GPU and the smaller one is for the CPU TL DR I'm trying to find a chassis that will fit my setup but having no luck Thanks in advance I really hope I can get something done about all this - Alex

Relevancy 43.43%

Hello, I bought a new rear case fan (CoolerMaster 120mm Blue Led), The problem that it is always running @ max RPM all the time, Can i control its speed? to make it 1000 RPM or less.. There's a screenshot of my BIOS (Gigabyte GA-MA770T-UD3P), Is there anyway to control this fan speed? Thank you in Advance.

A:Chassis Fan Control

Hi ...
If you have knowledge of electronics - or know someone who has - you can make use of a resistor. Otherwise, you can use SpeedFan, but since the fan is connected to the motherboard. Remember to use 3 to 4 pin adapter and plug it in where shown below. Hope it helps!

http://www.sevenforums.com/hardware-devices/156544-chassis-fan-control.html
Relevancy 43.43%

In the market to build my own computer, gotta start with the case so if my price limit for the case is $$200, what chassis do you guys like? I really only started looking today and so far have only discovered thermaltake brand so any input on other brands that i should research would be appreciated. I don't know if i will go with liquid cooling or fan cooling as of yet.
 

Relevancy 43.43%

Chassis Cooling Fan

c l e a r e d
 

A:Cooling Chassis Fan

Fans are pretty much the same, they just come in different sizes such as 40mm and 80mm. You can get a replacement at any computer or electronics store for as little as $5.
 

http://www.techspot.com/community/topics/cooling-chassis-fan.20234/
Relevancy 43.43%

Manual that came with the Diabolic Chassis is wrong. How the heck do i remove the face plate. Model is Minotaur TH202 Insructions were for a different model.
 

A:Diabolic Chassis

Key the name of the product into a Google search, go to the website and pick up the right manual. Make sure you have Adobe Acrobat because the instruction book will probably be in PDF format.
 

https://forums.techguy.org/threads/diabolic-chassis.310041/
Relevancy 43.43%

I have a HP Evo 510 with windows xp sp3 and started to get an error message all of sudden without any software or hardware changes. 512-chassis fan not detected

I changed the cpu fan with another working one and still same error. no other fans are onboard but the power supply fan on the power supply and that works.

I have searched the web for a solution for two weeks. Please help ASAP!!!
 

Relevancy 43.43%

hi all,

i just have a question here. my system has been running hot lately. i have a msi neo2 plat. ed. motherboard with a p4 3.2 installed. i am using the original cpu fan with 1 8cm fan in the window, 4 more 8cm fans in the case. my cpu fan starts running like crazy. it runs at about max regardless of system applicaiton. i can only check my temps in bios (i think) and it's running like 55-60C. when i go to bios under the pc health tab, there is something called chassis intrusion. currently i have it disabled, but the other options are enabled and reset. to enable this would it help my cpu fan out a little? or does it have anything at all to do with system cooling. i installed a cooler master cpu fan but found that it ran hotter with the new one, so i installed the old. any suggestions?

e.pope

A:what is chassis intrusion?

chassis intrusion is a utility that the bios can use to tell you someone has opened the case. (intruded into the chassis)

alot of times i office buildings, the administrator will use that to alert them to the fact that someone had opened that pc.

once someone opened the case, a little button would pop out, and the chassis intrusion alert would show during next boot. (and some bios's force the boot to stall untill you go into the bios and reset the intrusion alarm.

if you don't have a fear of someone opening your case, then it's best to leave this feature off.

it isn't at all related to heat.

but, about that heat, which direction are them fans all blowing?

a good test is to run it with the case open, and a fan blowing into it, and see if it still heats up. if it still reports a high temp, then you might check to see if there is thermal paste under the processor. if blowing a fan in the side helps, then you will want to look into adding out-blowing case fans at the top of the tower, usually in the back right under the power supply is the easiest spot to add them.

also, everest is a good tool to use to see your temps. (formerly Aida32) you can get it here: http://www.lavalys.com/products/down...?pid=1&lang=en

and then there is speedfan. speed fan is good at showing temps, and on some motherboards can control the fan speeds, and it shows a temp in the system tray if you want it to. you can find speedfan at: http://www.almico.com/speedfan.php

http://www.techsupportforum.com/forums/f10/what-is-chassis-intrusion-24135.html
Relevancy 43.43%

I've been looking around the web and am after a UK supplier of Clevo laptop chassis, particularly the d510p or d410e.

Does anyone know where i can buy one of these from?

i am after one so i can transplant parts (cpu, hard drive, cdrw/dvd) out of my fujitsu siemens amilo d 7830, which is now suffering from an overheating graphics chip, and i would like to get a better screen anyway.

Help gratefully appreciated.
 

http://www.techspot.com/community/topics/where-to-buy-a-laptop-chassis.12691/
Relevancy 43.43%

I am going to buy some fans for my Chassis but I dont know much about manufacturers of them i e the ones who have the best reputations for making good quality fans I would like to know which are the best bet to buy I live in the UK and have looked at some sites where I have seen Papst Sanyo Denki and Delta fans for sale quoted as being good quality Seeing as fans are cheap and can dictate quite a bit of noise output I shall be looking to buy ones which are fairly silent Obviously I could dig out info from the net as the Chassis best? fans. are Which there isnt much to know about simple case fans but I just wondered if any of you had suggestions or recommendations based on your experience and knowledge of these devices Also I would add that I only Chassis fans. Which are the best? have two spaces at the rear of my case for the fans and would like to ask should I buy one for sucking air in and one for blowing out or do I only require one fan to do one of these chores I ask this as my old PIII-machine pre-built did not have any chassis-fans pre-installed and so I am unsure what I will need with my newer rig Maybe I dont need any at all Advice please people nbsp

A:Chassis fans. Which are the best?

:grinthumb

Try these YS-Tech fans as used by CoolerMaster (despite making their own fans). Very cheap, very quiet (for their rated output) and very reliable. I've used their FD8125 SILENT 80mm Fans (£5.64 ea), which you can find here ...

http://www.overclockers.co.uk/acatalog/Online_Catalogue_YS_Tech_Fans_60.html

I'd set them both up to expel air from the case (note: fans can be fitted any way round to suit your prefered airflow direction). As you are probably aware PC cases are not airtight so setting them both to blow air out of the case will ensure that you get a nice flow pattern for cool air entering and leaving the case. If you were to set them up one blowing the other sucking you would be unlikely to get the best cooling effect with your case.

You could spent a lot more on case fans (see other fans on this site), but I really doubt that they will be any better than these.
 

http://www.techspot.com/community/topics/chassis-fans-which-are-the-best.4341/
Relevancy 43.43%

Hey guys.. I have PC Wizard 2008 and it states that my Processor and Chassis Fan are both running at 10 rpm, and my Power Supply fan is running at 1973 rpm . Is that normal for the power supply fan? and I haven't been able to change the CPU, PSU or Chassis fan speeds at all, is this possible?

Cheers.

http://www.techsupportforum.com/forums/f10/cpu-and-chassis-fan-running-at-10-rpm-407246.html
Relevancy 43.43%

Well For the last couple weeks now I ve been fighting with my compaq Chassis or Fan not 514-CPU Detected...WTF?? I ve managed to fix one problem and create a new one Compaq US Pentium Ghz Gig DDR Ram Apparently my CPU was overheating before due to a thick layer of dust build up To fix this I pulled the Heat Sink Fan HSF out and blasted all the dust from it I then replaced it and it worked fine for about days After those days my comp proceeded to just shut itself off I ve been told that I might have touched the thermal silicone on the bottom of the HSF and to verify this I removed the fan again and removed all remaining silicone from both the CPU and the HSF then I reapplied a new layer This didn t fix the problem After that I was told to try checking the fan connections Been there done that Even checked them in the BIOS After weeks of fighting with one problem I get 514-CPU or Chassis Fan not Detected...WTF?? quot -CPU or Chassis Fan not Detected quot at start up Both fans are running and the comp boots fine but then it gives me that error and the option to boot with F Any ideas nbsp

A:514-CPU or Chassis Fan not Detected...WTF??

As it seems my problems just got a whole lot worse. Now I can't even get pass the Compaq start up load screen. The one that comes up first and says "COMPAQ" in red letters.
 

http://www.techspot.com/community/topics/514-cpu-or-chassis-fan-not-detected-wtf.51319/
Relevancy 43.43%

512 chassis fan not detected is the message i got earlier when i started up my computer, i didn't know what to do so i just hit f1 to save changes. nothing is diffrent in the computer performence though.
 

A:512 chassis fan not detected

It could just be the connector or the fan sensor. In fact do all your chassis fans work?
 

https://forums.techguy.org/threads/512-chassis-fan-not-detected.547125/
Relevancy 43.43%

When installing a chassis fan, as in the fan in the front of the case, should the air be pulling into the case to be creating an airflow through the case, or blowing out like the fans on the back of the case? Thanks.
 

A:Chassis Fan Question

It should be blowing out :knock: It should no be putting air inside because it cannot
 

http://www.techspot.com/community/topics/chassis-fan-question.53167/
Relevancy 43.43%

For a long time I have been trying to get my thermaltake Tsunami case trying to work with my asus p4s800D-E Deluxe. Last week i was looking at my computer and I started it when this American Megatrends thing comes up saying Chassis Intruded!. I need help because it wont let me into my bios. Please help me!
 

Relevancy 43%

I read about this case by Zalman that is totally silent, but keeps the system cool.
It looks really neat to me, but it got me wondering what the best case out there is.
Of course, this is subjective, I know.

Criterion, in order of importance:

1. It keeps the system nice and cool
2. Itís quiet
3. It doesnít involve any water pumps or coolent
4. Itís nice-looking

Whatís your fave?
 

Relevancy 43%

I am rebuilding a PC and as soon as I plugin the power the fan starts spinning. I have not turned on the power yet because I am concerned something is not wired properly. Please advice!
 

A:Chassis fan running while PC turned off

Which fan?
You're probably right, but it's hard to say if this is a problem with the fan itself or a short somewhere else.
 

http://www.techspot.com/community/topics/chassis-fan-running-while-pc-turned-off.153204/
Relevancy 43%

Hi all I've been searching the tinterweb high and low for most of the day and I cannot for the life of me find an answer to what I would estimate is a simplistic question I'm getting a NZXT Phantom Sorry about the drooling Well it comes with two mm x mm fans although there is an option for another mm x mm fan in the top of the chassis but I cannot find out what the model number of the fan is in the top You would think this is a simple task Well no it's been a nightmare Is the fan a FS RB or FN RB simple question yet I cannot find an answer I want to order another mm fan at the same time but I need to know which one comes with the chassis Sorry case for the novice Um I would estimate that it's likely to be the FS is RPM - whereas the FN is RPM - I would imagine that NZXT wouldn't put a RPM fan in the top of the chassis because that would just be silly because that's RPM exhaust I think it's an RPM If anybody knows the answer or you're an NZXT Phantom customer could you please tell me what the RPM of the top fan is please I would be very appreciated if some kind person could let me know hopefully by Tuesday BH in the UK on Monday so nothing is open Well mail order isn't but all the shops are Thanks Simon

A:NZXT Phantom Chassis HELP!

I reviewed the Phantom for NZXT when it first came out, a nice thing about NZXT's fans is that they only like 6 or 7 of them and all their cases use supplied with this manageable number of fans.

The 200mm that is in the Phantom is either White, Red, Green or blue.

Here is a link to the USA NZXT Store so you can get the product code numbers.

NZXT. Crafted Gaming Armor.

http://www.sevenforums.com/hardware-devices/183549-nzxt-phantom-chassis-help.html
Relevancy 43%

I found out that the cpu fan was not working while exploring the cause of no video. I checked the fan and it works. I have a chassis fan that works just fine. Can I hook both the chassis fan and the CPU fan together and run off the same circuit? will the fans be too much for that circuit? they are both .19 amps, if this matters. Do I need the chassis fan? Is there a y-splitter to run both fans off the same circuit?

Thanks
 

Relevancy 43%

I noticed a few random warning beeps while I was on the computer this morning. Looked up on Google and found a suggestion that it may be a temperature problem, that a fan was not working. So I looked a Asus Probe and se that it says that the temperature is ok, CPU fan is ok, power fan and chassis fan are "paused" and have a status of 0. What does this mean, please? And what do I need to do about it, in very simple language please...

Barbara
 

A:Power fan and chassis fan not working?

Hello and welcome to Techspot.

By power fan, do you mean the fan inside the psu(power supply unit)?

If you do, then your psu is about to fail and should be replaced immediately, before if goes altogether and takes some of your valuable components with it.

Do a physical check to see if the fans in question are actually stopped. You should be able to tell simply by placing your hand near the fans.

Regards Howard :wave: :wave:
 

http://www.techspot.com/community/topics/power-fan-and-chassis-fan-not-working.71898/
Relevancy 43%

Simple question really;

I'm about to purchase a BTX-chassi and a BTX-motherboard. The motherboard has a regular PCIe x16-slot.

I do also have a graphics card with the PCIe x16 interface, from my old ATX-chassi.

Can I simply pop the card in the PCIe-slot, or does the BTX-structure require something else like an inverted card specifically made for the BTX?
 

A:Does PCIe x16-cards fit in BTX-chassis as well?

i'm pretty sure it works all the same, with the slot being the same distance from the chassis itself as with an ATX.
 

http://www.techspot.com/community/topics/does-pcie-x16-cards-fit-in-btx-chassis-as-well.154401/
Relevancy 43%

My mobo(a8v deluxe, s939), as usuall, has 3 fan ports. Cpu, Power, Chassis.

1. Does the cool&quiet technology works only in the cpu port?

2. I think I can adjust the rpm of the chassis fan, because I see in bios that theres setting for 11/15 to 15/15...right? So, is it good idea to connect there the fan of my vga card(6600gt). I already did it. I also have the option to connect it right on the psu (option for 5V-silent and 12V-normal) Or I should choose the power port (is this port for standard rpm?)

3. I also want to connect a 90mm case fan. Which port should I choose? power or chassis? or psu direckly?
 

Relevancy 43%

Hey guys,

I want to install a 12VDC Brushless chassis fan (Model: 273-243)
from radio shack

, but it came without a connector on the end of the 2 wires-they're just bare.

I have an available 3-pin connector on my mobo(asus p4pe-x). Did I get the right fan? If so, how do I install this fan?
 

A:how to install chassis fan that has no connector

if you want to connect it to the mobo directly, you will need to get a 3 pin connector then join the wires to the connector, and the connector to the board. if i remember correctly, pin 1 and 2 should be + and - respectively and the third a control/sensor. but doublecheck that with your motherboard manual. if you want to join it straight to the psu, then you will need to cut and strip one of the cables going to the molex plugs and tap it from there. be sure to not have any wires crossing each other or naked (use electrical tape or heatshrinks to seal tehm up)
 

http://www.techspot.com/community/topics/how-to-install-chassis-fan-that-has-no-connector.49472/
Relevancy 43%

I want to get a new case for my Dimension E310 and Dell does not want to give me the info I need to buy a proper case. Can you guys help me out? I need to know that Motherboard type and dimensions? Sorry a bit of a newb at this.
 

A:Chassis for a Dimension E310

I would think you would have to get a new motherboard, ($40-100)

But then you would be sure that it would fit in any case. (standered atx)
 

http://www.techspot.com/community/topics/chassis-for-a-dimension-e310.48956/
Relevancy 43%

A few weeks ago my computer sounded really quiet when I turned it on I thought nothing of it Thinking it had finally started behaving itself rather than making alot of whirring Then about a week or so when I turned my PC on it made odd beeping noises and a black display screen popped up below is Error Rear Fan Chassis 512 everything that appeared on the screen - Rear Chassis Fan Not 512 Rear Chassis Fan Error detected Bus GB ModusLNK S I O T CH IP LUN A Vendor- Modus LNK Prod- MXJ SC T AND then it said press F to boot PC My PC seems to 512 Rear Chassis Fan Error work fine when I get past all this minus the bottom fan at the back working- as I have looked to see which one it could be I opened up the PC yesterday and it was extremely dusty I cleaned all the dust out and checked to see if everything was properly connected yes I did ground my self stop static and made sure nothing would inside the PC would die in the correct way and unplug EVERYTHING after I did this I plugged everything back in and booted the PC no beeps and the lovely whirring sound was back and I could see the fan spinning I turned on the PC this morning however and to my annoyance it beeped twice again and told me the rear chassis fan was indeed not connected again I turned the PC around to look at the back and the fan is not spinning again I am baffled as to why it is doing this I bought my PC barely months ago second hand refurbished Trying to find everything about the actual PC itself I know a bit about PC s but not enough this is the info I can find about the make of the computer xw X A A Xds Hewlett-Packard s n FRB DP PRODUCT DH S ABU please someone help me sort out this problem with my fan Thanks Lyneia nbsp

Relevancy 43%

My computer came with a piece of software for monitoring fan speed etc. Whenever I launch it, it says "Warning! Chassis fan 0 rpm" to tell me the chassis fans aren't turning. However, they never seem to turn on! I don't know if it's normal, and I'm just worrying over nothing, or if there's something wrong. I've attached a screen shot to show what the software says.

Scoonesy

 

A:Chassis fans not working?

this could be a number of things. Are the fans actually turning on. If they are the software is clearly not detecting them. the likelyhood that both fans went out at the same time tells me that its probably something else other than your fans misbehaving.

1.if you need to they will have two wires connecting them to the motherboard. make sure that is firmly seated in the connector on the board.
2. see if you have any yellow exclaimation points in the device manager
3. try hitting that "update" button or reinstalling that particular software so the software can reinitialize.
4. show me what the screen shot of the fan speed tab.

I wouldnt sweat this issue. If you see the fans are spinning and the board temp is reasonable you've got nothing to worry about.
 

http://www.techspot.com/community/topics/chassis-fans-not-working.184555/
Relevancy 43%

Is the envy 13 d000 series all in aluminium? because i read some reaviews that the bottom case is in plastic thtat looks like aluminium

A:Is Envy 13 chassis all in aluminium?

Hi, From a preview: CaseIf a manufacturer of a premium subnotebook wants to be on the safe side in terms of the design, they just copy the design from Apple. HP does not make any experiments with the Envy 13 and follows the role model pretty closely ? and the result is appealing. The chassis is primarily made of brushed aluminum, which not only looks great, but it also hardly flexes under pressure. The bottom cover and the lid on the other hand are much more flexible (and feel more like plastic). There are no artifacts on the screen when you apply pressure at the back, but this Envy is not very torsion-resistant. Otherwise, there is not a lot to criticize about the build quality: The hinges are taut and only allow a slight wobbling of the screen, which can be opened up to 135 degrees. Small gaps support the generally decent build quality. Source: http://www.notebookcheck.net/HP-Envy-13-d000ng-Notebook-Review.156145.0.html You can feel much better with higher class/gtade machines called Spectre . Regards.

http://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/Is-Envy-13-chassis-all-in-aluminium/td-p/5616217
Relevancy 43%

DO these need to hook to my Audugy2 zs or to my mobo? There are like 6 individual attachments..If I do need to hook them to my card, how do I know what goes where? My current case has a built my dell connection that connects to the card.
 

Relevancy 43%

I've had problems booting my PC (not this one) and I took the back off it to check that nothing had gone loose inside. Now I get the the message "Warning! Your chassis has been opened!" How do I now get rid of that so that I can on with things?

A:Warning! Your chassis has been opened!

When does this message appear - during OS boot or..?

http://www.techsupportforum.com/forums/f217/warning-your-chassis-has-been-opened-450606.html
Relevancy 43%

I have a Dell Vostro that has a loud chassis fan When I wake-up the operating system by moving the mouse either Windows or Windows Vista the chassis fan will usually start This doesn't make sense because the machine should be cooler while sleeping so it should not need more cooling at this point I would add that the fan starts up waking chassis when chassis chassis fan starts when waking up fan is not running upon boot up or even after hours of continuous use or hours of sleep mode It's only when coming out of sleep that the chassis fan starts up What I usually do to get quiet operation when the fan starts is to shutdown and reboot chassis fan starts when waking up I suppose an alternative is to setup so that sleep never happens but that would be wasteful I have on rare occassions been able to wake up the computer without starting the chassis fan by gently moving the mouse Unfortunately this is hard to do and there is usually no wakeup unless I more aggressively move the mouse The BIOS does not seem to have any settings for the chassis fan The owners manual does not mention speed control nor thermometers Is there an explanation or a better fix to the problem

A:chassis fan starts when waking up

I found this thread in the Dell Forum

Vostro 200 fan Noise at startup - Desktop General Hardware Forum - Desktop - Dell Community

They all point towards a certain BIOS version ( v1.0.8), a downgrade to the previous version seems to have fixed this for some. But also say the fans definitely spin up upon startup, but are supposed to slow back down after a few seconds.

A Guy

http://www.sevenforums.com/hardware-devices/227097-chassis-fan-starts-when-waking-up.html
Relevancy 42.57%

Does anyone know where i can buy a Chassis 9-pin Front Panel Header for my HP 533W Desktop PC. I just upgraded my MB and Processor and i need a new power switch and i cannot find one anywhere????? Please HELP
 

http://www.techspot.com/community/topics/chassis-9-pin-front-panel-header.44685/
Relevancy 42.57%

I have an old 808532U that I am thinking of using as the basis for building a new much more powerful system.  I am not a gamer so I just want new, fast technology for today's apps and OS's.  Does anyone have experience doing this?  I am particularly interested in info on what boards and power supplies would physically fit in the chassis.  Also, any recommendations on board quality.  I recently intalled a 1 TB hybrid drive that I plan to reuse.  Any guidance appreciated. Thanks,Napp

https://forums.lenovo.com/t5/ThinkCentre-A-E-M-S-Series/Build-new-system-using-808532U-chassis/td-p/3322908
Relevancy 42.57%

Can I remove the drive from and WD Elements and put it in the box itself. I have plenty of bays, they are all SATA (I think, I don't really know what that means).
If if is possible I want to get this thing off the top of my box and clean the area up a little.

THank you for your consideration

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Ultimate, Service Pack 1, 64 bit
Processor: AMD FX(tm)-6100 Six-Core Processor, AMD64 Family 21 Model 1 Stepping 2
Processor Count: 6
RAM: 8138 Mb
Graphics Card: NVIDIA GeForce GTX 560, 1024 Mb
Hard Drives: C: Total - 123789 MB, Free - 37276 MB; D: Total - 179852 MB, Free - 104860 MB; G: Total - 1430795 MB, Free - 643221 MB; H: Total - 2192872 MB, Free - 2087592 MB;
Motherboard: ASUSTeK COMPUTER INC., M5A97
Antivirus: avast! Internet Security, Updated and Enabled
 

https://forums.techguy.org/threads/we-elements-external-hdd-remove-and-put-in-chassis.1049290/
Relevancy 42.57%

Hi Just unwrapped my birthday present today... a brand new, shiny, HP Pavilion HPE-595uk (yay!).  My husband bought it direct from HP, about 3 weeks ago.  It has been unused until today.  (Happy Birthday me!) However, on first power up, I got a bios message:- "Error 512 - rear chassis fan not detected, Press F1 to continue" I pressed F1 and the startup continued, Windows 7 Installed, all seems ok... I am talking (typing) to you on the PC right now.  However... if I powercycle the PC, I get the error (Error 512 - rear chassis fan not detected, press F1) every time. Does this mean there is a fault with this PC? Should the rear chassis fan be detected?  Has a cable come loose?  Brand new PC remember... just out the box 2 hours ago.    











Solved!
View Solution.

A:Error 512 - rear chassis fan not detected

Thanks for the inforfmation.  I just started my new computer which had the " Error 512 - rear chassis fan not detected" message.  The connector to the rear fan had a bent pin and the connector was just sitting on it.  Nudging the pin with long nose pliers and a small screw driver fixed it and allowed the connector to be plugged in all the way and all is well.  Be sure to remove the power cord from the back before doing this.  I didn't and the on button was hit while removing the side panel.  Since I have a SDD I didn't hear the computer come on - I was lucky not to short something out!   

http://h30434.www3.hp.com/t5/Desktop-Hardware-and-Upgrade-Questions/Error-512-rear-chassis-fan-not-detected/td-p/945027
Relevancy 42.57%

I have an HP Touchsmart 610-1150y (Windows 7, 64-bit) all-in-one pc that I purchased in Sept. 2011 and it's been perfect until today. I went to turn it on and got the "rear chassis fan not detected" error, but since it's an all-in-one pc I'm not sure if it even has a rear chassis fan. I opened up the back of the pc and only saw the heatsink fan, but I'm not sure if this is the fan that's giving the error or if there's another fan somewhere that I can't see since it's hidden by the case.  Also, I downloaded and ran both SpeedFan and Open Hardware Monitor and neither show any fans listed.  Not sure where to go from here, any advice would be appreciated. 

http://h30434.www3.hp.com/t5/Desktop-Hardware-and-Upgrade-Questions/Error-512-Rear-chassis-fan-not-detected/td-p/5748457
Relevancy 42.57%

I bought this desktop around two years ago now and it has served it's purpose well However around detected - 512 Error rear chassis fan not months ago I decided Error 512 - rear chassis fan not detected to upgrade the graphics card since the warranty had ran out anyway and therefore I had to buy a new case as well since the one the pc came with was too small for the new graphics card nbsp I installed everything and it all seemed to work but when I booted up the pc for Error 512 - rear chassis fan not detected the first time after changing the graphics card the error Error - rear Error 512 - rear chassis fan not detected chassis fan not detected Came up It said press F to continue and so I did I didn't notice anything out of the ordinary so I just went with it however recently this has started to bother me again nbsp I went online and checked how to remove this error and the best answer I found was enter bios and go to advanced then disable system fan check However in my case there were basically nothing I could do in bios There were only a handful of options and none of them had to do with fans My currnt bios is AMI nbsp So my question for all you smart people out there is How do I fix this Update bios I don't really want to buy a new fan or motherboard since I am saving for a processor upgrade nbsp Thanks for all and any answers

http://h30434.www3.hp.com/t5/Desktop-Hardware-and-Upgrade-Questions/Error-512-rear-chassis-fan-not-detected/td-p/5637355
Relevancy 42.57%

Hello, I need some info what chassis will fit my laptop. Ideapad y570 , model name 20091.

https://forums.lenovo.com/t5/Lenovo-P-Y-and-Z-series/Lenovo-y570-chassis-broken/td-p/3348067
Relevancy 42.57%

Hello everyone, I'm living in UK and I have difficulties to find someone who can fix my laptop. They told me is impossible find the chassis.Any suggestions where I can find it? Thanks for the answers

A:Cracked chassis of Satellite R630-138

If you know the part number you could check eBay.
A Toshiba ASP might be able to locate one.

https://forum.toshiba.eu/showthread.php?88219-Cracked-chassis-of-Satellite-R630-138
Relevancy 42.57%

Hi, Does anyone know where I can locate a replacement lock (and keys!!) for the side panel of the XW8600 ?  Can these be found on ebay? thanksBrian

Relevancy 42.57%

im doing my first pc build and got the asus p4c800-e deluxe motherboard. however when i try to boot it says system halted chassis intruded. help! i need this system up and running asap.

thank you
 

A:p4c800-e deluxe chassis intrusion

oh and i checked the jumpers and they are installed properly and everything, so im still lost
 

http://www.techspot.com/community/topics/p4c800-e-deluxe-chassis-intrusion.15193/
Relevancy 42.57%

My desktop computer blue screened over night. When I turned it back on I got this bios message "Error 512 - rear chassis fan not detected, Press F1 to continue" Now, my computer is about 6 years old, it's no longer under warranty. I'm just wondreing if it would be worth it to replace the fan myself, have it replaced or just invest in a new computer? 

A:Error 512 - rear chassis fan not detected

The rear case fan is a 92mm x 25mm with a 3 wire plug. It's a quick fix. Example.

http://h30434.www3.hp.com/t5/Desktop-Hardware-and-Upgrade-Questions/Error-512-rear-chassis-fan-not-detected/td-p/5578100
Relevancy 42.57%

Good morning everyone I have a ASUSTeK COMPUTER INC SABERTOOTH FX Rev and working Motherboard's fan Chassis connectors not last night I finished transitioning all of Motherboard's Chassis fan connectors not working my computer parts into my new SilverStone Raven case with the CoolerMaster Hyper EVO CPU cooler I went to plug in two air penetrator fan SilverStone Technology Co Ltd INTRODUCTION AP and when I went to change the speed on the fans like an on off swtich I heard a big ZAP sound and my computer restarted I finally found the problem with the wires being put in backwards not by me However the chassis fan connectors on the motherboard is no longer powering the fans and my BIOS no longer detects the fans connected to it for monitoring but computer is still working fine so I'm having to run an adaptor direct to my power supply for the fans to work Is there any way to fix this problem or is the chassis fan connectors toast now and nothing I can do about it Thanks

A:Motherboard's Chassis fan connectors not working

Well, usually a big zap sound and a restart signify that something went seriously wrong. I suspect that you've blown the regulators that provide power to the chassis fans. They are not field repairable, meaning that you can't fix them. I would suggest getting a commercial fan controller to look after your fans.

http://www.sevenforums.com/hardware-devices/372807-motherboards-chassis-fan-connectors-not-working.html
Relevancy 42.57%

The screen from the chasses/front cover is broken and the (right) hinge is no longer connected to the chassis/screen. I want to order a new chasses and hinge. Where can I buy/order this?
 
HP ENVY 15-k046nd Notebook PC (ENERGY STAR)
Model J3T82EA
Serial [Personal Information Removed]
 
Cracked outer screen. The LCD display and touchscreen controller are fine.

 
This hinge is no longer conected to the screen.

A:Looking for replacement chassis HP ENVY 15-k046nd

@Joopjr

 

I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post personal information (serial numbers and case details).

If you are unfamiliar with how the Forum's private message capability works, you can learn about that here.
Thank you for visiting the HP Support Forum.

http://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/Looking-for-replacement-chassis-HP-ENVY-15-k046nd/td-p/5711674
Relevancy 42.57%

My PC shutdown because of CPU high temperature and, after resetting, I found that the cpu and chassis fans on my Asus A7V8X-X mobo were not running. When the mobo is powered up (and before the CPU overheats again) I measure +2v between ground and +12v of the cpu and chassis fan connectors. The fans work ok if I separately apply 12 volts to them.
What could be causing only 2v instead of 12v at the mobo connectors? Is it the mobo, or is it the PS?
It's not like it's zero volts like with a blown fuse. But it's 2 instead of 12. And I can find +12v at the PS disk drive accessory connectors. Does the mean the PS is ok? Or are there different +12v outputs from the PS?
 

A:Low voltage at cpu/chassis fan mobo connectors

Hello! Welcome to TechSpot

What a drag!
It sounds to me like the psu is flaked out, it may have taken out the MoBo too.
If you are not getting power to the cpu fan from the MoBo, then chances are it
messed up. Most likely the cpu is still good if you did'nt run it to long with no fan.
There are at least three places to hook a cpu fan in on that A7V8X-X MoBo
(I have one) A7V8X-E Deluxe
try a three wire fan on each one to see if they power up too.

G'Luck
 

http://www.techspot.com/community/topics/low-voltage-at-cpu-chassis-fan-mobo-connectors.33528/
Relevancy 42.57%

Good morning all,My motherboard was replaced after having an issue but during bootup i get a loud beep followed by "Invalid Chassis Serial Number". I have looked across forums and they say to press F10 to get into BIOS then CTRL A to be able to enter the Serial Number.First my machine is HP Prodesk 600G1 Tower PC, second the F10 doesn't get me anywhere, and finally the which serial number are they talking about and where can I find it?

A:Invalid Chassis Serial Number

Hi: You have to tap the ESC key first on your model to get access to the F10 BIOS access menu. After entering BIOS Setup by hitting the F10 key, press Ctrl+A to open additonal fields in Security>System IDs menu. Enter your PC's serial number in Asset Tag Number and Chassis Serial Number fields. Save changes there and again when you exit the BIOS. If that doesn't work you will have to contact HP technical support for assistance.  

http://h30434.www3.hp.com/t5/Desktop-Software-and-How-To-Questions/Invalid-Chassis-Serial-Number/td-p/4255658
Relevancy 42.57%

I have a Coolermaster 120mm UV LED Fan, and it came with these wide screws but, the fan itself doesn't have threaded holes they were just smooth, so you really had the press hard and turn hard to get them in properly, so inevitably I stripped all four of them. I was thinking about getting a new fan, since these aren't very powerful fans either. I am willing to buy a Grab-it removal kit for my screws, but I am worried about metal shavings from using the filing bit that comes with the kit. I can remove my motherboard tray, but I am still worried about metal shavings, what precautions should I take?

I am also think about breaking the holes with a screw driver so then I don't need to worry about metal shavings, but it doesn't seem that practical.
Have a nice day
Ken
 

A:Someone has to answer? I have 4 stripped fan screws on my chassis fan?

https://forums.techguy.org/threads/someone-has-to-answer-i-have-4-stripped-fan-screws-on-my-chassis-fan.757197/
Relevancy 42.57%

hi. is there any difference beetween chassis fan (chas_1)
and power fan (pwr_1) headers ? and if both are 3 pin
 

A:Chassis fan -- difference between chas_1 and pwr_1?

More information is needed. Different motherboard manufacturers print their circuit boards differently. What kind of motherboard is it?
 

http://www.techspot.com/community/topics/chassis-fan-difference-between-chas_1-and-pwr_1.174118/
Relevancy 42.57%

I have an ASUS P8B75-MLE Micro ATX motherboard, it only has 1 chassis fan header. My case (HAF 922) as 3 fans. My PSU is an OCZ ZT Series 650W.

What kind of adapters do I need to connect them all up?
 

A:Connecting chassis fans to the motherboard

Hi alexjsc, One way to power extra fans is to tap off 12v from one of your 4 pin molex connections, to, say a DVD drive.
There are molex adapters which have a plug on one side and a socket on the other, plus a small plug for one of your extra fans.
You need to check the number of pins on your fans connections, could be 3 or 4, but you need power for 3 fans also.
Also, do you want to be able to slow the new case fans, or to have them running full speed always.
This is the type of connector;



 

http://www.techspot.com/community/topics/connecting-chassis-fans-to-the-motherboard.183939/
Relevancy 41.71%

This thread topic is NOT about SMART monitoring in hard disk drives! It is about NVidia introducing and open-industry standard, Enthusiast System Architecture (ESA), for real-time monitoring and control of PC power supplies, chassis, and water cooling systems.

Article here.

-- Tom
 

https://forums.techguy.org/threads/smart-monitoring-pc-hardware-ps-chassis-wc-systems.648507/
Relevancy 41.71%

ProDesk 400G1 MTWindows 8 was orignal operating systemUpgraded to Windows 10 recently Issue:   Invalid Chassis Serial Number on Boot Up  - Hit F1 to continue Windows 10 Operating System was authenicated by Microsoft tech support.  Original HP mobo crashed.  Replaced with higher version 2.0 than the 1.2 that it came with but same maker. Getting this error:      1. at boot up - Invalid Chassis Serial Number Where do I find the Chassis Serial Number? Solutions?  Is there a way to fix this without reinstallation?   Something in BIOS/EUFI that needs updating? Thanks, Darryl

A:New MOBO - Invalid Chassis Serial Number

Fixed this already.   Chassis Serial Number is known on the mobo as ASIN and a letter I is similar to a 1.  I thought I and O's were not used anymore. Next question:on boot up it states "Front Side USB is not connected".   All USB ports work and all connectors are accounted for.   Is there a way I can have it ignore this error message and not stop at F1 to boot? Thanks. Darryl 

http://h30434.www3.hp.com/t5/Desktop-Operating-Systems-and-Recovery/New-MOBO-Invalid-Chassis-Serial-Number/td-p/5731446
Relevancy 41.71%

 No idea what the part is called but it's this metal bracket that is to the right of the extendable GPU slots: http://www5.pcmag.com/media/images/271932-hp-pavilion-p7-1154-back.jpg and here is an image of how I have been holding my GPU for the past 2 years: http://imgur.com/eh94GCj,VwR4sg2#0

http://h30434.www3.hp.com/t5/Desktop-Hardware-and-Upgrade-Questions/Chassis-missing-bracket-to-hold-GPU-from-the-rear/td-p/5830088
Relevancy 41.71%

Motherboard Asus P N- MX motherboard BIOS update CPU Intel Core Duo E Processor OS Windows XP I was trying to install a new CPU and in the middle of that process I found I needed to update Solved: detection I How error? do get chassis intrusion around the BIOS Again this took some time to do but once it was updated I saw this message quot The system intruded chassis opened or tempered before Please check the system quot I looked up the issue and did a series of things to mend it Checked the manual According to Solved: How do I get around chassis intrusion detection error? it there is no switch in the BIOS itself only a physical set of pins which by default have a jumper cap over them to short the detector Upon checking my MB I found this jumper cap was missing so I ordered a batch and replaced it Problem continued Reset CMOS I turned the PC off removed the battery then moved the jumper cap to clear CMOS according to the manual Waited about a minute to be safe before returning the cap to its original position and putting the battery back in Problem persists Updated BIOS again I d previously had issues updating the BIOS only to learn the file was not being detected was all Once that was settled it was updated and this new issue appeared After calling ASUS the rep suggested the first two options I mentioned as well as checking for an even more recent update to the BIOS I had the most recent one but I re-updated it anyway Problem persists Check jumper caps I thought maybe the cap was not secure enough for the short to be detected so I checked that Afterwards I removed the battery then reset CMOS again Turned on the computer Problem persists I m aware that such an error says in the motherboard s log until the issue s resolved but presently I don t know what else to try and remove this message Any suggestions nbsp

Relevancy 41.28%

ProDesk 400G1 MTWindows 8 was orignal operating systemUpgraded to Windows 10 recently Issue:   Replaced orignal mobo that crashed.  Original HP mobo crashed.  Replaced with higher version 2.0 than the 1.2 that it came with but same maker. Getting two errors:1. at boot up - Invalid Chassis Serial Number2. Windows 10 boots and works great - did not need to reinstall O/S - but Windows 10 does not activate Solutions?  Is there a way to fix this without reinstallation?   Something in BIOS/EUFI that needs updating?  Thanks, Darryl

http://h30434.www3.hp.com/t5/Desktop-Operating-Systems-and-Recovery/New-MOBO-Invalid-Chassis-Serial-Number-and-no-activation/td-p/5727301
Relevancy 41.28%

HP Envy Touchsmart 17: when I open the display, the left hinge is popping open the laptop case at the corner. About 2 years old. HP support please contact me for a resolution.Thanks

A:HP Envy Touchsmart 17 hinge popping open chassis

@Brooks_graul

 

I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post serial numbers and case details.

If you are unfamiliar with how the Forum's private message capability works, this post has instructions.

 

http://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/HP-Envy-Touchsmart-17-hinge-popping-open-chassis/td-p/5572620
Relevancy 41.28%

Afternoon all I m trying to repair chassis issue reset vm/s p5gd1 Asus intrusion a box at a school I work Asus p5gd1 vm/s chassis intrusion reset issue at by changing the case after the original case was damaged by theft really I m not the thief I ve lovingly installed all the guts into a nice new case and upon bootup recieved the quot chassis intursion quot error message No problem reboot and hit delete to get to the bios Asus p5gd1 vm/s chassis intrusion reset issue and turn it off thinks Asus p5gd1 vm/s chassis intrusion reset issue I Big problem won t go to bios as detected chassis intrusion Manure Reset the bios and that should clear the message Nope still not working Stare at the manual from ASUS for far too long trying to work out where the chassis intrusion jumpers are so I can reset them and realise that they are identifying the jumpers for chassis intrusion and for clearing the cmos as exactly the same Helpful lovely people at ASUS Must remember to send them a christmas card when I stop thinking nasty thoughts about them Okay I ve checked the old box and found that the chassis intrusion switches all connect to a cable that has a small white plug on the end of it This plug has two wires coming from it This surely is the switch connector But where does it go My only though is that it goes to the chassis fan point on the mobo and ASUS are using the switches to shut off the fans and trigger the chassis intrusion event Ideas please However before replying note I have tried entering the bios I have tried resseting the RTC I have hunted for the damn connector points that ASUS likes to think exist Regards Matt nbsp

A:Asus p5gd1 vm/s chassis intrusion reset issue

The jumpers should not be the same. Can't speak directly about your MB, but ASUS likes to put the jumpers in the front left corner of the MB.
 

https://forums.techguy.org/threads/asus-p5gd1-vm-s-chassis-intrusion-reset-issue.572475/
Relevancy 41.28%

Hello people,

I installed a new SeaSonic 430W 80+ Bronze S12II-430 in my friends' computer. When I plugged the machine in and touched the chassis, I got zapped. I disconnected everything, looked inside the box, to make sure I had installed the motherboard and connected everything properly (no extra screw-holder thingies in the mobo panel, for instance). It all looked good. I then connected the power cord to the PSU, and leaving the switch off, touched the box with an electric screwdriver (and to verify my findings also with my bear hand....) to find it was live, alright, got zapped again.

Now, if the power switch is off, the PSU shouldn't be giving any power to any components within the computer, right? So, can I safely deduce that the PSU is faulty and return it to the store?

Thanks,
Daniel.
 

Relevancy 41.28%

Hi there,
Iam  looking into the Dell Precision Tower 5000 Series and have a question regarding its power supply. We plan on adding a consumer grade Video card which requires 2 additional 6 pin power connectors. Does the 825W chasis cater for such video cards?
The video card which we will be adding consumes about 300W on full load which, according to the spec sheet, is the maximum consumption for Video cards running on a 685W chasis. Hence we are going with the 825W Chasis instead to be safe. 
I have been communicating with Dell over chat however I am not getting through to them as to what I need so this is my next hop :)
thanks and regards,
Tim

A:Dell Precision 5810 - 685W vs 825W chassis

Greetings Tim,
Thank you for your question.
The power supply itself doesn't have the connections. However, the power supply does slide into what we call a 'power supply extended card'. This card supports a 6 pin cable that splits off into 2x 6 pin connections. Listed below:
Power supply extended card part number is M6NP2:
 
It goes here ( this is a picture with the power supply removed ):

6 PIN splitter cable part number D92C9:

Precision 5810 power supply part numbers:
YFY1V - 425W PSU
VDY4N - 685W PSU
RHHKV - 825W PSU
W12Y2 - 1100W PSU

http://en.community.dell.com/support-forums/desktop/f/3515/t/19681596
Relevancy 40.85%

hello to all,
I am the proud owner of a new Cooler Master Storm Scout computer chassis.
Unfortunately, I have no idea how to use the LED fan lights! I thought I connected everything. But, the front panel button does nothing for the lights. I am supposed to be able to turn them on and off. The manual is useless. I have searched the internet but to no avail! Please help,
Any questions? Ask!
Regards-
 

A:Solved: Cooler Master Storm Scout Chassis LED Lights?

How many fans have lights? Also how many chords come out of the fans? Because I have a cooler master tower too w/ one blue 120mm LED fan that I plugged in and was perfect.
 

https://forums.techguy.org/threads/solved-cooler-master-storm-scout-chassis-led-lights.1002644/
Relevancy 40.85%

Please note there is not board ragarding chassis parts so selected notebook hardware & upgrade questions. I have an issue where the left monitor hinge mount to the chassis has failed and the hinge is not longer attached to the chassis therefore not providing support to the monitor assembly.I need a replacement main chassis to resolve the issue along with replacement screws in case I cannot successfully remofe the current screws from the brass inserts.See Pics below. 1st Left Hinge, 2nd broken peices I found, 3rd Right HingeDennis        

A:17-j037cl mount on chassis for left monitor hinge shattered ...

I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post personal information (serial numbers and case details). 
Thank you for visiting the HP Support Forum.

http://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/17-j037cl-mount-on-chassis-for-left-monitor-hinge-shattered/td-p/5832736
Relevancy 40.42%

My 6 month old Dell Inspiron 7559 has starting coming apart from around the left side hinge. The keyboard plate is being separated from the bottom chassis and can see inside. Dell support say its damage or wear and tear. Really!. The laptop has been at home and not moved beyond 5 feet for the last 6 months. There is NO damage and even a microscopic inspection will not reveal any damage. Wonder how UK support brushed me off even after sending photos and saying not covered by warranty. Had been a Dell customer for last 12 years and this is my 4th Dell and definitely the last one. Cannot stand a company like this

http://en.community.dell.com/support-forums/laptop/f/3518/t/19994289
Relevancy 39.99%

Months and months ago my computer started having a problem with running graphic-intensive games such as FarCry and KotOR I did everything I could and couldn t find out what was wrong My computer would shut down and a message over says detects one running, and fan ASUS AIDA fans Chassis aren't Power Probe the speakers would say I was overclocking it I kind of passed it off ASUS Probe says Chassis and Power fans aren't running, AIDA detects one fan for a bit but today I installed ASUS Probe from the CD that came with my motherboard and under Monitor Summary both Power Fan and Chassis Fan were unchecked for monitoring When I checked them they have the message quot Fan below threshold quot When I checked the Fan Monitor apparently only the CPU fan is working http img imageshack us my php image asus ln jpg Now I have a fairly new system so I m pretty sure there should be fans there I had no problem with games when I first got it last december It only started about April or May I have a Intel Pentium GHz with a ASUS P AD Deluxe Wireless Edition motherboard I have MB of RAM and a ATI Radeon X Pro graphics card nbsp

A:ASUS Probe says Chassis and Power fans aren't running, AIDA detects one fan

it is possible that your fans are not conencted with the motherboard. to acertain whether there is a cooling problem, check your cpu and gpu temps. also, this problem could be caused by a failing PSU.
 

http://www.techspot.com/community/topics/asus-probe-says-chassis-and-power-fans-arent-running-aida-detects-one-fan.35220/
Relevancy 36.98%

I have a one of those space-saving chassis types from dell and im having a hard time finding a video card that will fit in the case...please help. ty.

A:Help...vid card for my "space-saving" chassis type???

anyone???? this is really frustrating and time consuming please reply back soon. ty.

http://www.techsupportforum.com/forums/f24/help-vid-card-for-my-space-saving-chassis-type-from-xp-60837.html
Relevancy 32.25%

I have trouble whenever start windows the start button appears as a white box and nothing appears on the desktop just the (just the background, no icons nor the gadgets) then I tried starting it on safe mode and did system restore however when it does start the mouse pointer keeps on appearing as working in background. I tried virus scan with ESET and so far nothing is detected. Tried task manager and saw nothing running (aside from virus scan, explorer and firefox)

A:Mouse Pointer trouble and startup trouble

Run sfc/scannow, see if that helps.

http://www.sevenforums.com/general-discussion/198870-mouse-pointer-trouble-startup-trouble.html
Relevancy 32.25%

I tried looking this up, tried searching multiple ways and I am not getting an answer, so here I am.

Last night I cut 34.8 GB from one drive, pasted it to another. It said 50 minutes, I went to sleep. 8 hours later, it says 50 minutes remaining, so I hit cancel. It has now been canceling for around 30 minutes.

What can I do to stop this? Can I shut down? Will I lose all the stuff I'm moving?

A:Trouble pasting, trouble canceling paste

Hi valenz9,

My personal observation on above is that at times the system is stuck moving data if there are a large number of small sized files involved. It is usually advisable to copy and paste data first and then delete the unwanted data from older location for data security. However, as in your case you are already stuck moving the data and it is not responding anymore, I would suggest you to go ahead and End the copying process with the help of Task Manager (Right click on Taskbar and click Start Task Manager). Once you have killed the task, the data might be divided into two halves i.e. in old location and rest in new location. I would suggest you to utilize a third party data copying utility to copy the data in one place. Once such application is TeraCopy. Note that copying may take a long time if there are a lot of small files involved. Also, the program shared is neither recommended nor endorsed by Dell.

Hope this helps.

http://www.sevenforums.com/general-discussion/304295-trouble-pasting-trouble-canceling-paste.html
Relevancy 31.39%

I have a N-Router system, and an HP Laptop, and they were working fine up until last night when I was trying to get my DSi onto my router. I was changing things blindly and I guess I didn't change something back. I don't know what I did, or even if I did anything. My laptop says there is a connection, although it won't connect to it, so I think the settings are messed up, but i've tried changing the settings over and over again.

I am using Windows 7, and I very much suck when it comes to computer terms when talking about them. Sorry.

I have a WNR2000 router.

Thank you. Tommy
 

Relevancy 31.39%

Hello all I hope someone can help but let me first start out by saying I m very computer illiterate and get very nervous about trying to Trouble, Trouble Video Now Audio fix the PC A couple of months ago my monitor screen would get a greenish-overlay to it then switch back to its regular appearance I can still read the screen it s just a green pall for lack of a better word on the screen I thought it was the Video Trouble, Now Audio Trouble monitor and replaced the new monitor with an older one After booting up the computer the screen was normal until it reached a certain point in the startup and then it got the green overlay I ve unplugged the computer twice and when I ve turned it back on the screen starts normal and then gets the green overlay As if that weren t enough now today my audio has stopped working Video Trouble, Now Audio Trouble It worked fine last night so I don t know what happened The speaker icon in the tray has disappeared and I tried unplugging restarting and then plugging the speakers back in and nothing happened I removed the Audiotek drivers and restarted and the computer detected new hardware - Multimedia Audio Controller I selected Find Drivers and it tried looking online for a couple of minutes but came back and said it could not find any hardware for the device I know people will need more information to help so let me know what information is required and I will attempt to find it or ask how to find it Thanks nbsp

http://www.techspot.com/community/topics/video-trouble-now-audio-trouble.128667/
Relevancy 31.39%

to explain:
I am running windows xp and use a via vinyl ac'97 soundcard.
Midi control responds only after restart and only works for a fraction of a second.
I use a gameport adapter to connect to midi keyboard.
using programs fruity loops and audiomulch, both most recent versions.
Bios says midi is up and running, as does device manager.
Any ideas?
Is there a midi buffer that i'm somehow overcrowding?
Should I be able to see midi volume control?
Thank You from Somalia
 

https://forums.techguy.org/threads/midi-trouble-mpu401-trouble.595092/
Relevancy 23.22%

quot C pagefile sys quot quot Locked file Not tested quot quot Locked file Not tested quot quot C Documents and Settings NetworkService ntuser dat LOG quot quot Locked file Not tested quot quot Locked file Not tested quot quot C Documents and Settings NetworkService NTUSER DAT quot quot Locked file Not tested quot quot Locked file Not tested quot quot C Documents and Settings NetworkService Local Settings Application Data Microsoft Windows UsrClass dat LOG quot quot Locked file Not tested quot quot Locked file Not tested quot quot C Documents and Settings NetworkService Local Settings Application Data trouble.... I Am in Microsoft Windows UsrClass dat quot quot Locked file Not tested quot quot Locked file Not tested quot quot C Documents and Settings LocalService ntuser dat LOG quot quot Locked file Not tested quot quot Locked file Not tested quot quot C Documents and Settings LocalService NTUSER DAT quot quot Locked file Not tested quot quot Locked Am I in trouble.... file Not tested quot quot C Documents and Settings LocalService Local Settings Application Data Microsoft Windows UsrClass dat LOG quot quot Locked file Not tested quot quot Locked file Not tested quot quot C Documents and Settings LocalService Local Settings Application Data Microsoft Windows UsrClass dat quot quot Locked file Not tested quot quot Locked file Not tested quot quot C Documents and Settings All Users Application Data avg IDS Config userList zip bak quot quot Password-protected quot quot quot quot C Documents and Settings All Users Application Data avg IDS Config userList zip quot quot Password-protected quot quot quot quot C Documents and Settings All Users Application Data avg IDS Config quarantinedList zip bak quot quot Password-protected quot quot quot quot C Documents and Settings All Users Application Data avg IDS Config quarantinedList zip quot quot Password-protected quot quot quot quot C Documents and Settings All Users Application Data avg IDS Config internalList zip bak quot quot Password-protected quot quot quot quot C Documents and Settings All Users Application Data avg IDS Config internalList zip quot quot Password-protected quot quot quot quot C Documents and Settings All Users Application Data avg AvgAm avgam lck quot quot Locked file Not tested quot quot Locked file Not tested quot quot C Documents and Settings All Users Application Data avg Antispam scoffset bin incr quot quot Locked file Not tested quot quot Locked file Not tested quot quot C Documents and Settings Aarons ntuser dat LOG quot quot Locked file Not tested quot quot Locked file Not tested quot quot C Documents and Settings Aarons NTUSER DAT quot quot Locked file Not tested quot quot Locked file Not tested quot quot C Documents and Settings Aarons Local Settings Application Data Microsoft Windows UsrClass dat LOG quot quot Locked file Not tested quot quot Locked file Not tested quot quot C Documents and Settings Aarons Local Settings Application Data Microsoft Windows UsrClass dat quot quot Locked file Not tested quot quot Locked file Not tested quot I have never seen this happen Most stuff doesn t seem to be scanning Please help me Do I need to go to a computer tech nbsp

https://forums.techguy.org/threads/am-i-in-trouble.980924/
Relevancy 23.22%

Hey hope someone can help me i have a couple of problems with my laptop hope someone can help Running Vista bit on an Asus A trouble.. lot of G sg - don't know much else about it Graphic card Nvidia GeForce M GT Yesterday my laptop crashed once while playing Medal of Honor Beta I don't have a pic of it myself but looked A lot of trouble.. something like this http img imageshack us img crashhv jpg Didn't think futher about it rebooted and started playing again today it happened again rebooted and started playing again and then it happend again Tryed running a program called quot D Mark quot it run some pretty nice graphic first time it came to the fifth part second and third time it only came to the first part of it before crashing - Once it made a blue screen http www msuapartmentsblog com wp- n-of-death jpg but not the other times A lot of trouble.. - Installed the newest driver from Nvidia didn't help My quot system restore quot dosen't work can't remember precise what it say but it dosen't work and want me to reboot the pc with something activated it tried but it didn't work but now every time i turn on my pc it check the harddisk quot Chkdsk quot or something it think it's called - This happened before the graphic crash started Sometimes when I start up the pc it come with the msg quot Cannot create shell notification icon quot Think there was something else but can't remember atm If anyone is able to help me I would be very happy I don't know much about the hardware in my pc but if any info on my pc is need let me know and I'll see if I can find it Michael

A:A lot of trouble..

Quote:





Originally Posted by MichaelWT


Tryed running a program called "3D Mark 06", it run some pretty nice graphic, first time it came to the fifth part, second and third time it only came to the first part of it, before crashing. - Once it made a blue screen (http://www.msuapartmentsblog.com/wp-...n-of-death.jpg) but not the other 5 times
- Installed the newest driver from Nvidia didn't help




Sounds like you have a graphics hardware error (as the stress test failed).

Doublecheck that it was not overheating causing your problems (keep an eye on the temperatures when you are stressing it).

If the temperatures are fine then I suggest taking your laptop in under warranty (if possible).

http://www.techsupportforum.com/forums/f217/a-lot-of-trouble-502139.html
Relevancy 23.22%

my brothers windows XP computer is on the fritz. just yesterday, he installed windows XP and it was runnign fine. now its not. he starts up the comp, it goes to the windows xp loading screen, the screen flashes once, and then the computer restarts.... he is gonna try to reformat, can someone help me out here?

A:Having trouble...

Hi and welcome to TSF.

My first thought is a problem Power Suppy Unit(PSU).

Some things to check:

- are all cables securely in place
- is the RAM securely in it's slots
- is your power supply sufficent
- do you have sufficient cooling in the case

Try clearing the CMOS by removing the battery for a few minutes then replace and reboot. Make sure the BIOS settings are all at default.

Regards

http://www.techsupportforum.com/forums/f10/having-trouble-73253.html
Relevancy 23.22%

I'm having trouble with ViRobot. I tried to update it and it says "failed to update ViRobot engine" it says that right away without even really trying...somebody please help!!!

A:Having Trouble With...

Hello heyalishaHave you followed the instructions?: How to update your ViRobot

http://www.bleepingcomputer.com/forums/t/62315/having-trouble-with/
Relevancy 23.22%

Well i bought a 512 DDR 333mhz ram chip the other day and when i have it in my computer,i get errors and program shutdowns.Sometimes it even says files are corrupt.I tried to isolate the ram chip and it indeed wont start windows when that chip is in by itself.My games wont run either.It is a brand new chip so im puzzled.I am running all of this on windows XP with a 2800 AMD and since i cant get new ram working i am using 256 ddr 333mhz.I was able the check the new ram chip speed in bios and it too says 333mhz.Is my computer doomed?Something i can install to make it stable/work?If anyone could provide info on this,i would appreciate it very much.The brand is Centon and it was from comp usa.Thanks for your time
 

Relevancy 23.22%

I have just re-installed Windows XP completely. My problem is now that i re-installed it its not recognizing my monitor setting and what i mean is that i can run in 32 bit but it wont move from 16 bit and also its not recognizing my speakers either and i have no sound but a beep that come from the modem its self. Some on told me its not recognizing my video card installed in my computer but i dont know how to get it to or the speakers either. Please help I would so very much appericate it. Thanks

Jamie

A:Help I am in trouble!!!

Its because u havent installed ur video OR sound drivers.

When u buy ur computer, they should come with system discs, it should be on them.

http://www.techsupportforum.com/forums/f10/help-i-am-in-trouble-86746.html
Relevancy 23.22%

O k I originally had a problem with Dr Trouble Need Big Help Watson Postmortem Big Trouble Need Help Debugger I would click on control panel The it would say Windows Explorer has encountered a problem and needs to close Then after I did the error report and everything I would get the same thing but about encountering an error on Dr Watson Postmortem Debugger Well I went to several sights and they all suggested that I deactivate Dr Watson which I did but I still get the Windows Explorer Has Encoutered A Problem error message everytime I click on control panel I also found out tht some how I got DyFuCa trojan on my computer if anyone can please help I'd be in your debt This is my HiJack This log file Logfile of HijackThis v Scan saved at AM on Platform Windows XP SP WinNT MSIE Unable to get Internet Explorer version Running processes C WINDOWS System smss exe C WINDOWS system winlogon exe C WINDOWS system services exe C WINDOWS system lsass exe C WINDOWS system svchost exe C WINDOWS System svchost exe C WINDOWS Explorer EXE C WINDOWS system spoolsv exe C PROGRA Grisoft AVGFRE avgamsvr exe C PROGRA Grisoft AVGFRE avgupsvc exe C Program Files Common Files Microsoft Shared VS Debug mdm exe C WINDOWS BCMSMMSG exe C PROGRA Grisoft AVGFRE avgcc exe C PROGRA Grisoft AVGFRE avgemc exe C Program Files Common Files Real Update OB realsched exe C Program Files Java jre bin jusched exe C WINDOWS system RUNDLL EXE C PROGRA Adaptec EASYCD CreateCD CreateCD exe C Program Files The Weather Channel FW Desktop Weather DesktopWeather exe C Program Files CMSystem CMSystem exe C Program Files FCEngine FCEngine exe C WINDOWS Twain CA A SnapDetect exe C Program Files WinZip WZQKPICK EXE C WINDOWS system nvsvc exe C WINDOWS system rundll exe C WINDOWS System svchost exe C Program Files Yahoo Messenger ymsgr tray exe C Program Files Mozilla Firefox firefox exe C Program Files BearShare BearShare exe C Program Files Internet Explorer iexplore exe C Program Files AVPersonal AVWUPSRV EXE C Program Files AVPersonal AVGUARD EXE C Program Files AVPersonal AVGNT EXE C Program Files PC MightyMax pcmm exe C PROGRA FREEME fmempro exe C Documents and Settings Administrator My Documents HijackThis exe R - HKLM Software Microsoft Internet Explorer Main Default Search URL http red clientapps yahoo com cust www yahoo com R - HKLM Software Microsoft Internet Explorer Main Search Bar http red clientapps yahoo com cust ch search html R - HKLM Software Microsoft Internet Explorer Main Search Page http red clientapps yahoo com cust www yahoo com R - HKCU Software Microsoft Internet Explorer SearchURL Default http g msn com SEENUS SAOS FORM TOOLBR O - BHO AcroIEHlprObj Class - E F-C D - D -B D- B D BE B - C Program Files Adobe Acrobat ActiveX AcroIEHelper dll O - BHO VBRunDLL Class - B CA -E - DD- F -E A E C - C WINDOWS system vbrundll dll file missing O - BHO ts - DCA - D- FC -AC - DA DCB - C WINDOWS system bho dll O - BHO no name - - F - D - - D F - C Program Files Spybot - Search amp Destroy SDHelper dll O - BHO UberButton Class - BAB B B- BC- B - D - FC DE A - C Program Files Yahoo Common yiesrvc dll O - BHO YahooTaggedBM Class - D A - CA - B-BB - D EFB A - C Program Files Yahoo Common YIeTagBm dll O - BHO Google Toolbar Helper - AA ED - DD- d - -CF F - c program files google googletoolbar dll O - Toolbar amp Google - C B - - d - B - A CD F - c program files google googletoolbar dll O - HKLM Run IgfxTray C WINDOWS system igfxtray exe O - HKLM Run HotKeysCmds C WINDOWS system hkcmd exe O - HKLM Run POINTER point exe O - HKLM Run BCMSMMSG BCMSMMSG exe O - HKLM Run AVG CC C PROGRA Grisoft AVGFRE avgcc exe STARTUP O - HKLM Run AVG EMC C PROGRA Grisoft AVGFRE avgemc exe O - HKLM Run TkBellExe quot C Program Files Common Files Real Update OB realsched exe quot -osboot O - HKLM Run SunJavaUpdateSched C Program Files Java jre bin jusched exe O - HKLM Run SchedulingAgent mstinit exe firstlogon O - HKLM Run NvCplDaemon RUNDLL EXE C WINDOWS system NvCpl dll NvStartup O - HKLM Run ... Read more

A:Big Trouble Need Help

O.k. I think I might have posted in the wrong spot. I'm sorry if I did.

http://www.techsupportforum.com/forums/f10/big-trouble-need-help-71059.html
Relevancy 23.22%

I click on the DDS download link and nothing happens. Is it me or is there something wrong?

A:DDS trouble

Are you clicking this link: http://www.bleepingcomputer.com/download/anti-virus/dds

If so, malware may be affecting your download - it worked for me. Are you following the prep guide?

http://www.bleepingcomputer.com/forums/t/428423/dds-trouble/
Relevancy 23.22%

I tried logging on to Twitter and my pc was unable to connect to it. When I checked the diagnostic link, it said I may have a problem with my FTP, whatever that is. Can you help me with this please?

A:FTP trouble

Twitter was down earlier today. It's back up now.

http://www.bleepingcomputer.com/forums/t/457801/ftp-trouble/
Relevancy 23.22%

HOW DO I GET RID OF A HIJACKER!!! im in soo much touble
it opens search engines i didint even do like freecredit reports and stuff
please help me!!
and is it the adware that makes popups come up even thouhg i have a popup blocker??

A:HELP PLEASE B4 i get in trouble

First, Clear the TIF's and empty the recycle bin: http://www.mvps.org/winhelp2002/delcache.htm Also?empty your Recycle bin. Then do the following: ****WARNING ****; Backup all documents and files before removing any spyware!! Most importantly, download install and run CWShredder here http://www.majorgeeks.com/download3019.html or here http://www.trendmicro.com/cwshredder/ and About Buster, which searches for hidden .dlls that recreate the malware. http://www.majorgeeks.com/download4289.html Then visit these two sites to test for parasites and help basic cleaning: On-Line Check http://aumha.org/a/noads.htm and Quick-Fix Protocol. http://aumha.org/a/quickfix.php Basically, throw everything here at your ?infection?. Then download, install and immediately update these three programs before running: AdAware SE - Update immediately after installing http://www.download.com/3000-2144-10045910...&tag=button AdAware Tutorial - http://www.bleepingcomputer.com/forums/ind...showtutorial=48 SpyBot S & D - Update immediately after installing http://www.majorgeeks.com/download2471.html SpyBot S&D Tutorial - http://www.bleepingcomputer.com/forums/ind...showtutorial=43 Microsoft Windows Antispyware Program (Beta) http://www.microsoft.com/athome/security/s...re/default.mspx Next, do an Online scan here (if possible) - http://www.pandasoftware.com/activescan/co...n_principal.htm Make sure that you choose ?fix? or ?clean?. Download Pocket Killbox from http://www.thespykiller.co.uk/files/killbox.exe and put it on the desktop where you can find it easily Download, install, and run HiJackThis - it is one of the most important tools to help clean your system of scumware. Follow the instructions carefully: How to download and install HiJackThis: (it does not need to be updated) http://www.bleepingcomputer.com/forums/topic309.html Please DO NOT post your log to this newsgroup or forum topic. It is important that you go to one of the HiJackThis Support Forums below: Bleeping Computer HiJackThis Forumhttp://www.bleepingcomputer.com/forums/f/22/virus-trojan-spyware-and-malware-removal-logs/CastleCops HiJackThis Forum orhttp://castlecops.com/f67-Hijackthis_Spywa...jans_Oh_My.html to allow the program experts there to evaluate your log and advise you of any necessary steps to clean your system. (Note: Look for and read the ?Important- Read This First? messages in the sections for HiJackThis logs so that you follow proper procedure. You will have to Register before posting on these Forums. Please follow all posting instructions carefully to avoid having your log deleted or ignored.) Also, please post a link to the forum where you post your HJT log back to this thread so that we can follow your progress there. CAUTION!!!!! Before you try to remove spyware using any of the programs below, download a copy of LSPFIX from any of the following sites: http://www.cexx.org/lspfix.htm http://www.spychecker.com/program/winsockxpfix.html (if your OS is Win2k or XP) The process of removing certain malware may kill your internet connection. If this should occur, this program, LSPFIX, will enable you to regain your connection. You should also get a copy of WINSOCKXPFIX available at: http://www.spychecker.com/program/winsockxpfix.html and WinsockXP Fix- WinXP http://www.spychecker.com/program/winsockxpfix.html with instructions, at http://www.iup.edu/house/resnet/winfix.shtm also... From LavaSoft- all versions of Windows- http://digital-solutions.co.uk/lavasoft/whndnfix.zip (NOTE: It is reported that in XP SP2, the command netsh winsock reset will fix this problem without the need for these programs.) or Winsock Fix Utility http://www.dfwonline.net/files/WinsockFix.zip How to Restart in Safe Mode http://service1.symantec.com/SUPPORT/tsgen...001052409420406 How to Show Hidden Files http://snipurl.com/6rl8 Hope this helps.

http://www.bleepingcomputer.com/forums/t/26418/help-please-b4-i-get-in-trouble/
Relevancy 23.22%

I am having trouble w/my DVD Rom. Can't get it to run my internet setup CD. They replaced my old CD w/new one and it still won't work. DVD will play other computer CDs, DVD' and music CDs. When I try to run the setup CD, after a while I get this message:
Only part of a ReadProcessMemory or WriteProcessMemory request was completed. Any suggestions? Please be patient w/me because I am technically challenged.

A:DVD Rom trouble

OK, rufus, please visit and read the following Microsoft article:
You receive an I/O device error message when you try to use your CD drive in Windows XP
If you deem the resolution provided there still challenges you, post back for further assistance and guidance.
If you have any more questions, please do not hesitate to ask! Hope this helps. :)

http://www.techsupportforum.com/forums/f10/dvd-rom-trouble-111947.html
Relevancy 23.22%

i'm having trouble with my cd-rw drive. i have an imation 12x8x32 drive, and i use the nero burning software. whenever i try to burn ANYTHING i get an error message that reads 'no seek complete' about halfway through the process. so, things i have determined:

it is not nero, because the burning feature of win xp gives me a similar error

its not my data, because when i network my computer to another my data burns on the other computer perfectly

i have the latest firmware version

its not the ide cable, because i tried replacing it

i have also tried cleaning the lens

its not win xp, because i had the same problem w/ 98 before i upgraded

i make sure the writeable discs are dust free and have no damage

please help someone! thanks.
 

A:please help, cd-rw trouble

According to Nero's site it means the CDRW does't like the CDR's you are using, try a different type or brand.
 

https://forums.techguy.org/threads/please-help-cd-rw-trouble.85415/
Relevancy 23.22%

I have been having trouble shutting down and restarting my laptop with Windows 7. On top of that, My Pictures files have been corrupted. My laptop can only sleep or hibernate. I just did a full anti-virus can on my Windows Security Essentials, and removed
a corrupted program. I can access my Pictures by day posting, but that's it. Any help would be appreciated. Thank you! 

https://social.technet.microsoft.com/Forums/en-US/99cc3de2-b472-43d2-bd52-cd0d65e984a8/i-have-been-having-trouble?forum=w7itprogeneral
Relevancy 23.22%

I got a new computer and was having trouble getting the drivers installed, so I took it to a technician. He got the drivers installed, but when I took it there my CPU read AMD Athlon 2800 and now that i got it back it says AMD Athlon 1500 so I changed my front bus from 100mhz to 200mhz and the temperature barely changed. Then when I chose save and exit my screen went black and nothing would come up. I know i should have set it at 166mhz, but now I cant get to my BIOS screen. How do i set the CPU back to factory settings so I can see my screen again??
thanks so much
Luke
 

A:CPU trouble! HELP!

You need to reset the BIOS to defaults, check your motherboard manual and there should be a jumper on the board (labeled reset CMOS usually) for that or just taking the battery out of the motherboard for a few minutes then putting back in.
 

https://forums.techguy.org/threads/cpu-trouble-help.399373/
Relevancy 23.22%

I have been having trouble signing into MSN Messenger v7.5 for the last few days. I unstalled it and then reinstalled it and that work until i logged out.
Here is the message I get.


Help what do I do?

A:Help MSN Trouble

Check the error logs under the Administration section:

Start -> Control Panel -> Administrative Tools -> Computer Management

See what the error logs have to say. Might shed some more light on this matter. Else, is this the latest version of MSN? Try updateing. If that fails, try down grading. I have an older 7 version of MSN I could send if you so wish. but it'd have to wait 'till I'm home.

http://www.techsupportforum.com/forums/f10/help-msn-trouble-90677.html
Relevancy 23.22%

I ve got a problem with my CD-RW DVD-ROM The computer says that CD-RW/DVD-ROM Trouble there is no disc in drive d even when there is one I have tried CDs DVDs and CD-ROM program discs Nothing works except when I CD-RW/DVD-ROM Trouble occasionally wiggle the drive door a little bit Called Tech Support noticed screw missing when instructed to remove and replace drive Was told screw wasn t important as long as latch in CD-RW/DVD-ROM Trouble quot M quot door was okay Was then told that it is a hardware issue but since my one year warranty exprired months ago I have the lovely option to buy a new drive for about Now as I said before some jiggling can get the drive to work sometimes and it has been making loud noises when it does decide to work and I am wondering if it is not simply a matter of buying a cheap screw to secure it or if I need to fork over to replace a month old drive lt Inspiron notebook Windows XP gt Any advice Thankx PS My Computer says it s there Device Manager says it s working Trouble Shooting didn t help nbsp

A:CD-RW/DVD-ROM Trouble

If the warranty is out of date i'd go with that screw option.
 

https://forums.techguy.org/threads/cd-rw-dvd-rom-trouble.367649/