Windows Support Forum

Faulty Iiyama flat screen monitor

Q: Faulty Iiyama flat screen monitor

I have an Iiyama ProLite E1700S flat screen monitor - recently, the blue Contrast/Brightness dialogue box has started to appear (initially on/off, now permanently on) for no reason - have tried everything I can think of to "reset" the screen, but suspect it's gone faulty - any ideas? - worth repairing? - or just ditch it?
Relevancy 100%
Preferred Solution: Faulty Iiyama flat screen monitor

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link (This link will automatically start a download of Reimage that you can save to your computer.)

Relevancy 76.11%

Hello all,
I have a Phillips 32" LCD (model # 32TA2800/98) that I connect my laptops to with a VGA cable. I usually had my Gateway NV53A (AMD Mobility Radeon HD 4200 series Graphics card) connected and I never had a problem. Recently I connected my Samsung to the monitor and again, had no problems. When I reconnect my gateway the PC detects the monitor but the monitor does not detect the PC. If I switch back to the Samsung it works fine. I have reset the TV to factory default the only way I know how (owners manual). I have unplugged the power cable to the TV for 10 min+. I have changed from a 14 pin VGA to a 15 pin. I have updated all drivers.


A:1 monitor (Phillips 32" flat screen), 2 laptops, only 1 laptop detected by monitor

It appears this one has got them all stumped. I really need help with this one and I am at a total loss. I would be forever in someones debt.

Could it be that the TV has a capacitor that holds the settings for an extended period of time? Maybe I should leave it unplugged for 24-48 hours?
Relevancy 76.11%

Im doing this for my Dad so i have absolutely no idea how to describe the problem but i figured this place was my best shot as google is giving me no Can't monitor drivers for flat Solved: screen AOC install monitor results on my query There appears to be no monitor drivers installed on the pc and its running from the bare minimum settings I think the refresh rate is set at a low low low setting Solved: Can't install monitor drivers for AOC flat screen monitor because Solved: Can't install monitor drivers for AOC flat screen monitor lets say if i move a window by dragging it across the screen its all choppy doesnt move smoothly at all sort of like it jumps every half a second until Solved: Can't install monitor drivers for AOC flat screen monitor i stop moving my mouse then stops The same with when i m scrolling in internet explorer smooth scrolling doesnt exsist lol I figured it was a driver problem seeing as there wasnt one installed So i found the disk with the drivers on and followed the instructions which were as follows quot Right Click quot the mouse anywhere on the quot BLANK quot area on the desktop and click on PROPERTIES Click the SETTINGS tab and then click ADVANCED Click the MONITOR tab and then click PROPERTIES Under MONITOR PROPERTIES click DRIVER then click UPDATE DRIVER On the HARDWARE UPDATE WIZARD select Install from a list of specific location ADVANCED then click Next On the next HARDWARE UPDATE WIZARD window select DON T SEARCH I WILL CHOOSE THE DRIVER TO INSTALL Then click NEXT On the following window click on HAVE DISK Type D ENGLISH DRIVERS Where D is the drive letter of your CD ROM Drive on INSTALL FROM DISK window then click on OK Highlight the model of your monitor on the following list under HARDWARE UPDATE WIZARD then click NEXT Note If Windows prompts you that the driver is not signed click CONTINUE ANYWAY On the last window of HARDWARE UPDATE WIZARD click FINISH to complete the installation After the monitor driver installation has been done restart the computer to update the windows setup for driver installation I got as far as quot Display gt Monitors quot Then i couldnt get any further because there wasnt any properties button to select Can anyone tell me where im going wrong Sorry for the long post nbsp

A:Solved: Can't install monitor drivers for AOC flat screen monitor

Additional monitor drivers are usual not needed. What do you have for a video adapter and are those drivers installed? Right click on My Computer choose Properties/Hardware/Device Manager. What information is listed under Video Adapters?
Also what are your screen resolution and refresh settings?
Relevancy 73.53%

Movies I watch over the internet,on my HP-ze4910 Laptop,come in a little dark.
Will this situation be better,if I hook up a Flat panel Monitor,on Laptop,and or Desktop?
Relevancy 73.53%

could someone tell me what my monitor settings should be,i have an hp pavillion mx pages all look like they are on a curve,also my desktop has a black band all around it,i was messing around with it,and forgot the settings they were on,as far as height,and width .etc.thank you.

Relevancy 73.53%

I have just purchased a new 17" flat screen monitor from PC world today. Not a make I recognise but they have sold several 309 not cheapest, not most expensive. Chameleon-I on the box.
When I have set it up, there are 3 lit spots on the monitor, one white one just above centre - not quite eye level and two a white and a pink about 1" below the top of the screen.
Question: Is this acceptable - I assume these are lit or dead pixels but should I contact PC world and demand/request an exchange. Would another one be any better.
Probably as I go along I would get used to them being there but I would like your advise and to whether it is acceptable.
Thank you.

A:flat screen monitor

I would certainly call to see if an exchange is possible. It really depends on the retailer and the manufacturer. They all seem to have different policies regarding dead pixels on new monitors.
Relevancy 73.53%

I want to use a flat screen LCD monitor as a TV. I'm going to mount the TV on to a wall about 10 feet away from my laptop (that will feed signals to the monitor).

I want to be able to watch TV / DVDs / VHS on the monitor.

What additional hardware do I need, and how can I hook this up to minimize quality loss?


A:Using flat-screen LCD monitor as a TV

My pc is set up to be tv, dvd video etc all in one. I use the Winfast DTV2000H card.

I run my video through it, although I dont watch videos hardly at all. I also run my sky digi box into it. Im using the coaxial rf in though & the picture isnt amazing, Im not sure what quality you would get using other connections.
Relevancy 73.53%

I got a 15" Flat screen LCD TV/Monitor. I don't have sound. I didn't get any kind of cables for sound to & from pc hookup and the book doesn't tell me anything about it. How do I get sound to work??? Do I need any special cables? No, it is not set to mute. Thanks!

A:HELP w/ LCD Flat screen TV/MONITOR...

A bit more information please. The name/model of the LCD Monitor/TV, are the speakers on the monitor or are you trying to use the computer speakers?
Relevancy 73.53%

Not even sure if anyone can help with this, and more than likely my flat screen monitor is a goner. What happened is it just simply stopped working. No power surge, no falling off my desk. Just kaput. The only thing that happens is that by the button, the green light that turns on when the monitor is on, flashes in 7 second incriments, which tells me its getting power. There is no power adapter, just a regular cable, the exact same as what plugs into a computer tower. So is there some kind of trick I'm missing to get it working again?

A:Flat screen monitor out?

You need to try another monitor to eliminate the possibility of the computer at being fauly and not the monitor
Relevancy 72.67%


My TFT monitor has failed.
It's giving little flashes on the screen, rather like a strip-light thats trying to start.
Anybody have any idea what could be wrong?

Im wondering if the light inside could be a bit like a strip light.
Maybe it needs a new lamp.

But ive never seen this problem before.
Anybody seen this before on a TFT monitor?

Relevancy 72.67%

Hello. I am new here. I have a Samsung T240 monitor. It worked when we had it hooked up in one place. Moved it, and it wasn't dropped or anything, but it has horizontal lines all through it. You can still see the screen, but its not functional. Any advice or anyone know if this is repairable and if it is, where could I find such a person in Bowling Green, KY? Thanks again~

A:Flat Screen Monitor advice

Check that your video drivers are all correctly installed and that the cable is plugged into the system fully. Also check to ensure you are not trying to run a higher resolution then that of what is supported by the monitor.
Relevancy 72.67%

I have a new BenQ flat screen - and whenever I try to open a video file the whole screen goes to black before it plays it. And then when I close the application that is playing the video file the screen goes to black again. It doesnt happen when I have the resolution set to the highest (1280 X 1084) but I like the resolution set to 1024 X 768. It wasn't happening when I first set everything up - and I don't know why it has started. Im using Win ME and have a 17inch screen. Anyone know what might be going on? BenQ tech support knows nothing about it...


A:Flat Screen Monitor Goes to Black

Is 1280 X 1084 the monitor's native resolution? If so, LCD's like to be only at their native resolution. This could be the source of your problem.
Relevancy 72.67%

I have a Gateway flat screen monitor model 900G. When I plug the flat screen in and turn it on. the screen will come on just fine for a minute then go dark. the monitor power light stays on but the screen is blank. I can ether push the power button off and on or hit the input button on the side and the screen will come up normal for a minute then go blank agen. Has anyone run into this problem before?

A:re: a problem with a flat screen monitor

Is the screen refresh rate set to the correct rate (hertz)? You'll find the setting in the advanced display settings.
Relevancy 72.67%

I have a Dell with a flat monitor. sometimes it totally goes white. not blue, but white. the whole thing. i have to shut it off because i can't warm boot, then unplug it and go into f12 then get out of it and it comes back to the normal windows screen. would this be the video card or motherboard or what? i'm clueless and frustrated. the pc is not that old. thanks


Relevancy 72.67%

When I bought my refurb HP running Windows XP Home I thought I could use the monitor from my old system Dell Dimension XPST running Windows se The old monitor is an analog flat-panel and it has two cables coming out of the back One connection fits into the Monitor Flat Screen new computer an CPU Flat Screen Monitor an new computer s video port I m nor sure where the other cable and connector goes It doesn t fit into any port on the CPU It has a group of pins on the left and a group of pins on the right of the connector if you turn it over and look inside the connector However on boot-up I get a message that Flat Screen Monitor an new computer the computer doesn t recognize the monitor but if I turn off the monitor and turn it on again it will display my desktop but not the systray icons Do I need a special driver for the monitor What else could be the problem Thanks in advance for any advice on this nbsp
Relevancy 72.67%
Relevancy 72.67%

After installing a new "True Flat Screen", CRT Monitor. I cannot adjust to get straight horizontal lines. The best I can get is a horizontal "Hour Glass", screen. The monitor has been checked by the manufactuer and is working properly. Could ther be a confiquration or conflict with the video card.
I have removed all speakers and adjusted monitor geometry buttons. Anyone experienced this problem.

Windows Me
ATI 9200 Video Card
9.0 DirectX

A:Flat Screen CRT Monitor Distortion.

Please don't duplicate post, reply here:
Relevancy 72.67%

this morning black monitor HELP screen out! flat i was on my desktop working fine before we had a power cut in our flat which shut off all the eletric flat screen monitor black out! HELP socket points My pc was switched off immediately I managed to switch on the main power suppy in our flat then electricity was back on again flat screen monitor black out! HELP switched on the pc running okay i could even hear the windows starting up from my speaker but my monitor Dell FP inch flat screen years old went completly black out tried to switch on the indicator light it wouldn t turn on normally it s green when on tried other buttons brightness etc still no light It s as if it s been switched off spoken to a few friends who suggested me to see whether the fuse s flat screen monitor black out! HELP been blown tested fuse on a reader absolutely fine tested the power cable on other applicance and it s working fine Also tried to disconnect monitor from pc leaving only the power cable connected to monitor still the same - does this mean that it s not the power suppy but the monitor itself Is the problem repairable I m aware that during the last couple of weeks the monitor screen blinked once in a while say twice during the day just randomly but very subtle help nbsp

A:flat screen monitor black out! HELP

The LCD monitor itself has a power supply (or 2) built in to handle the lighting of the screen. Sometimes the power supply and/or fuses are fine, but the capacitors are blown or leaking.

I would take apart the monitor and take a look around.
Relevancy 72.67%

I have a HP 2035 flatscreen monitor.  The power indicator light went out.  Is there a reset or do I replace it?
Relevancy 72.67%

I need a new monitor, I was wondering if there are any bargins out there. I was thinking about a flat screen. Thank you for any info.

A:Looking for deal on flat screen monitor

Depends on how much your willing to spend. But check this out.
Relevancy 72.67%

Have been using a VUESCAPE flat screen monitor about two years with no problems.
This week the monitor went black.
If I turn it off, then back on I get a clear & crisp picture of my desktop. This only lasts less than two seconds and the screen goes black again. I have repeated this cycle many times to no avail, problem persists.
I have tried the following;
replaced power cord --- same results.
replaced the vga cable --- same results.
connected a different monitor --- works with no problems.

Is there somthing missing that I can do ?

If I open the case on the monitor what should I look for ?

Unit is out of warranty so I did not get much tech support.

Any advice you give me will be appreciated.


Relevancy 72.67%

I just plugged a flat monitor in to my WIN 200o box - I get the win splash screen and than a message from the monitor saying Video not compatible. What do I need to do?

A:Flat Screen Monitor and Win 2000

i suspect it may need a driver - whats the graphic card you have - whats the PC make/model
whats the flatscreen make model?
Relevancy 72.67%

I have an LG flatscreen model L17ns. The buttons on the bottom of the screen are all wiggley and skewed. How can I open the case to access them?
Thanks in advance
Relevancy 72.67%

Hi I ve got a Dell quot flat screen monitor that I purchased in with an intermittent white screen problem that has now become a permanent condition I am using my laptop to post this thread because I can t use my PC now Every time now that I turn on the PC the screen is white and I have to press and hold the start button to shut it down I have read other threads on this forum for this same problem and it seems it could be either the monitor or possibly a graphics card The PC ran perfectly during the times the monitor was working in between white screen episodes Suggestions were to try to hook up the monitor to another system which I don t have or connect another monitor to my computer which I also don t have What are the chances that it is simply the monitor I d hate screen monitor dead? Flat to purchase a new monitor when the problem lies elsewhere like the PC Any help would be greatly appreciated nbsp

Relevancy 72.67%

I have a Gateway 17" Flat Screen Monitor that I bought just over a year ago, so the warranty isn't any good anymore. It just stopped working, but it's not like any monitor failure I've ever seen before -- the screen went completely white, with the exception of a couple of horizontal bands of dark colors (blue) that are just one or two pixels high.

At first I though my video card may have failed, but I hooked up another flat screen monitor that I borrowed from work (used the same cables as the other monitor, so it's not the cables) and it works fine.

Any ideas what may have failed and whether it is economically repairable?


A:Flat Screen Monitor Failure?

I'd guess you're out of luck. The LCD appears to have had a catastrophic failure. It could be the control circuitry, but either would be more than the current price of a 17" LCD to repair.
Relevancy 71.81%

I have an opportunity to purchase a very nice flat screen monitor. It is a Gateway and hooked up now to a Gateway computer. I don't have a Gateway computer. I suppose this monitor would have specific drivers. I have tried to contact Gateway but they will not help because I don't have a computer serial number. I am wanting to difficult would this use this monitor on another computer. I suppose I would need specific drivers for this that correct? How might I acquire these drivers? Can I simply copy the driver files from the guys gateway computer. Is it that simple?


Relevancy 71.81%

Ive got an LG266w flatscreen, with 2 inputs, both Analog and DVI.
I just upgraded my vid card to a Geforce 7300, which has both out puts.

I tried setting the monitor to go dvi mode full time but it won't do it.

So can someone explain the differance between the two modes? Do they randomly change or is there something I missed in the setups?

I have the drivers installled for both.. Just don't know when a picture is DVI or not..

I run my screen at 720x480, because if I try to go 1680x1240 or whatever, the icons and writting are too small for me to to be able to read them.


Relevancy 71.81%

I know people say it cant be done. But it HAS to be possible.
I have an old laptop that survived a flood... Barely. thr processor is toast, but the video subsystem and most of the mobo is good.
I want to be able to rewire the flat panel to accept a signal from a standard vga card. The dead laptop is a omnibook 4100. Has anybody played with this kind of thing before? It should be possible, YES? i can send pics of the parts to anyone willing to help. Thanks!

A:LAPTOP screen as flat panel monitor

Hmm..from the laptops I've taken apart the screen is usually connected to the motherboard by a thin ribbon.

I assume you would have to somehow connect the leads from the ribbon to a normal monitor cable and then rig up a way to get power to the monitor.

Worth a try I guess if it's all junk anyway..

Good luck.
Relevancy 71.81%

I want to disassemble this monitor. However, the model does not have the typical four screws at corners, where, once removed, the frame comes off easily. There are four screws under the monitor stand mount (once stand is removed) but that seems to be it. Anyone know the trick or catch of separating the monitor from the frame?
Relevancy 71.81%

Well, I'm using a flat-screen (not flat panel, so its CRT, I believe), Compaq FS7600 and simply put, it just flickers occasionally with a noise. This is kind of annoying...anyone know what to do?

I unplugged all its wires and it still does the flickering.

A:Solved: Flat-screen monitor flickers

Internal monitor problem, either a component on its way out or a bad connection internally.

These can be all but impossible to find, and remeber that there is about 25,000 volts inside the monitor...
Relevancy 71.81%

Hello guys.
Ok so i am having a tough time deciding on which/ what spec i should get for a flat screen monitor.

I use the computer mainly for film viewings and photos. the other stuff aswell like the internet and games sometimes but not much. I need to know what to look for.

I was thinking of getting one with 1280x1024, 700:1 contrast, 75hz, response time of 12ms. The model is an iiyama. the main reason for getting one is actually lack of space. So do i get one thats great in one area or good in many?

I'm pretty much stuck on what is best. Any help would be very good.

Cheers then

A:Need advice on buying a flat screen lcd monitor...Please help

the_Joster said:

Hello guys.
Ok so i am having a tough time deciding on which/ what spec i should get for a flat screen monitor.

I use the computer mainly for film viewings and photos. the other stuff aswell like the internet and games sometimes but not much. I need to know what to look for.

I was thinking of getting one with 1280x1024, 700:1 contrast, 75hz, response time of 12ms. The model is an iiyama. the main reason for getting one is actually lack of space. So do i get one thats great in one area or good in many?

I'm pretty much stuck on what is best. Any help would be very good.

Cheers thenClick to expand...

Go ahead and get one, for what you're wanting to do there is no limitation whatsoever within the specs you stated.
Relevancy 71.81%

Do I HAVE to buy the special cleaner??? there an acceptable substitute? I am thinking a little windex on a soft cloth but I really don't know for sure. I don't want to ruin them (I have two) I haven't cleaned them before and I noticed the one I am using is lookin' a bit dusty.

A:Solved: Cleaning a flat-screen monitor


Just a damp cloth is usually adequate, followed by a dry lint free cloth. Windex contains chemicals that can be harmful to the surface finish of some screens.

Relevancy 71.81%

I just got a 2003 Flat Screen monitor that works fine but it has built-in speakers and the audio cable is missing. What kind of cable do I need and is it standard? The company name is an importer called PROVIEW TECHNOLIGIES INC and gives no technical support. FYI; Model 568, Product PL566s.



A:Pc flat screen monitor audio cable

All of the cables I've seen so far are the same on the monitor end as they were on the computer end. If it looks the same on the monitor end, it probably is the same.
Relevancy 71.81%

Is it worth investigating repair for a flat screen monitor ? My 3 1/2 year old 19" Gateway monitor just quit working.

If I turn it off and back on, it'll display the Windows Desktop for about one sec and then it goes blank. Also, the monitor power light stays lit, so I know I'm not losing power to it. I attached another monitor to the PC, so it's definitely got a problem.

A:Solved: Flat Screen Monitor issue

Depending on the problem,it could cost as much as just replacing it.
I usually check then when I need to
get parts.
Here is a dell monitor on sale.........
You can do a search at for deals from different stores.
You might check craiglist for your area,
Someone might be selling one cheap.
Relevancy 71.81%

Hello, I just got this monstrosity of a monitor..
When set to reccomended resolution of 1680x1050, the stuff on the screen is really small. Things like the browser window fills the whole screen, but the web page only takes up a small portion and leaves the rest blank. Is there a way to adjust the content onscreen so that it uses the whole screen? Ive had to lower the resolution to 1024x768. So that the wife is happy with the way it looks.
Also does someone know a thing or two about the hows and whys of resolutions. Or a site where I can learn about them. So that when someone asks me what they do I dont respond " it makes stuff on the screen smaller!"

A:Flat screen monitor resolution questions

Resolution size shouldnt be viewed like TV size where the screen is bigger and so the image is bigger. The best way to put it is like a house (web page) to a plot of land (your monitor), if your land grows (resolution increases), the house remains the same size, so if your resolution gets higher, the website size doesnt change but its viewable space has increased so you have a bunch of dead space now dont you?

Most websites are built with a 800-1100 px width to accomodate the most common resolutions (800 x 600 & 1024x768) and not make them to wide. When your monitor is set at 1680 for the width, you have about 800 to 600 pixels left on the screen as filler space. By getting a larger monitor but keeping your same 1024x768 resolution, you really just increased the size of what you were viewing. Increasing the resolution gives you more viewable space to accomodate multiple windows more multi-tasking, etc... Higher resolutions do make things smaller because you are making more space for your desktop both horizontal and vertically. If you put your resolution at 800 x 600, you'd have to scroll left or right on most of the pages you visited.

Widescreen lcd's like this one are sold more for video or gaming uses. Playing a DVD at the optimal size for the monitor will look a lot better than at the 1024x768 setting. If you simply want to browse the web then you can just leave your settings at whatever you feel comfortable viewing.
Relevancy 71.81%

Hi guys,

I just recently purchased a new flat wide screen monitor and already it's very dusty! This is my first flat screen so I'm unsure as to how to properly dust/clean it. Is it safe to use normal yellow dusters?

Thanks in advance,

Relevancy 71.81%

My husband and I started with identical computer systems just over a year ago Now his flat-screen monitor has gone wonky Unless someone has a suggestion for getting it to work again we may be out the cost of replacing it He has a Compaq Presario S V computer with a Compaq FP quot flat-screen monitor Almost a month ago now he tells me it started rolling the picture like an old TV without vertical lock Nothing but vertical streaks He finally got it to quit but has no idea what he did because he tried Solved: problems Flat-screen monitor everything he could think Solved: Flat-screen monitor problems of at the time Yesterday it started again warranty ran out March of course and now there is NO picture at all on the monitor Just black screen The little green light at the bottom by the big button that doesn t work now flashes on briefly every - seconds He took a screen shot and it printed what should be showing on the screen so we know it isn t the computer Is there anything he can do besides replace it nbsp

Relevancy 71.81%

I have a flat screen monitor and my manual lists the do not's on cleaning but not the do's!!!

What is the best way to clean flat screen monitors????

Sorry for posting such a basic question, but we are talking about a couple of hundred pounds worth of kit))))

A:Solved: Flat screen monitor cleaning

I usually use a semi-damp cloth (not dripping wet! - squeeze all the water out) to wipe the whole thing clean once a week.
Just plain soap, cleaning fluids, etc.
Relevancy 71.81%

The screen is blank for a very long period after start-up and it also goes blank if the PC is idle for long period.

The PC is also getting slow again. I've done the auto-run and check off programs and turned some progrmas to manual from auto but it has not helped. And I have degragged and do disk cleanups daily.

Relevancy 71.81%

I just bought a second hand Philips 170C flatscreen monitor off eBay.

My previous 15" NEC MultiSync LCD 1560NX works fine. So no issues with graphics card or pc.

I have tried both the proper display driver and the default plug and play - no difference to the problem.

Problem - When I put up a white screen there is a pink cast over the screen which is more evident towards the edges and stronger at the top left.

This particularly effects light greys on the screen, but all clours seen affected.

I've played around with the colours but because the problem is not even over the screen - I can't fix it.

Could this be down to a backlighting fault?

Any help from you tech wizards would be very much appreciated.


David (havendel)

A:Flat Screen Monitor Display Problem

More to the point is that the LCD element took a strong hit somewhere and is out of alignment - ya can't bounce these things!

The backlight is simply a white flourecent bulb, and won't cause color missplacement, unless its what's loose and is pressing the LCD element somehow.

How was it packed when it arrived? There's a reason why the manufacturer inserts these screens in a foam sleeve when shipping, and this is it.

Relevancy 70.95%

I just got a used Dell Inspiron S from a guy - it is running Signal to Monitor??? No Flat Screen Dell - Inspiron/Mag Windows Dell Inspiron/Mag Flat Screen - No Signal to Monitor??? XP and boots up just fine I have a Mag Innovision LT B and all I get from it is quot no signal quot I emailed the guy and right away he said the PC probably isn t compatible with my flat screen I did not tell him it was a flat screen which it is He offered to give me an old monitor not flat screen and said it would work with it - - or he has a Compaq that he said would work with my flat screen I don t mean to be dumb here but why is that I thought well maybe the video card was bumped on the ride home OR I could Dell Inspiron/Mag Flat Screen - No Signal to Monitor??? swap out the Dell video card for the one in my old PC that died custom built one I popped the hood of both and I cannot even figure out how to GET to the video card in the Dell let alone swap it for my old one Mag s site has a trojan and Dell s site suggests something about three types of video connections display port connector integrated video card connector which is the type of connection my monitor has and add-in video card in expansion slot The information says that quot Usually integrated video cards are automatically disabled when an add-in video card is installed The monitor must be connected to the add-in video card if present quot Please help Is there anything - within reason - I can do to get these two to work together I am so close to being back in business not literally but I miss my home PC and yet so far Thanks for any help nbsp

Relevancy 70.95%

I have owned this monitor from brand new for a number of years
It has recently started flickering

any thoughts?

A:Princeton VL193 flat screen monitor flickers

Try the monitor on another system see if it still flickers.
Relevancy 70.95%

had been using nvidea for many years set to 1280 x 720 32 bit with no problems.
my hdd died, and for the cost of a new hdd the computer shop sold me a used bigger faster computer. with an ati 9200.
closest video setting are 1280 x 768 32 bit, a little to big. cant see the edges of my browser. any other settings tv won't reconize. anything i can do?

Relevancy 70.95%

My NVIDIA GeForce2 MX 400 won't work on my HP Flat Screen Monitor. When I hook it up the screen shakes and I can't figure out how to fix it. Please help me.

A:NVIDIA GeForce2 MX 400 won't work on HP flat screen monitor

I would guess that the card is not capable of displaying the required screen res. Are you getting a post display or are you able to enter the bios? Can you boot the system in safe mode? If you can enter the bios or safe mode and it is displayed normally, you can attempt a driver update. Note you will have to uninstall the current driver in safe mode.

You are dealing with 10yr old technology with that card. There comes a time where old stuff just cannot be used with modern hardware. This may well be the case here.
Relevancy 70.52%

Question: Why will my Inspiron 8200 hook-up to a television, but not to a 20" FLAT PANEL LCD SCREEN MONITOR?

Thanks for educating me.
Relevancy 70.52%

Hi just re formatted my PC but the drivers were lost. I think I need the Intel 32 ID drivers to work with my monitor. Does anyone no where I can get them???

Thank you

Relevancy 70.52%

I am looking to buy a new flat screen monitor, minimum 17 inches. Knowing that there are probably deals out there waiting to be taken advantage of, and being completely ignorant of almost all of them, I am posting here to see if any of you brilliant folks who are have been so kind answering my questions in the past, know of where decent lcd's can be found, without parting with too much dough. Please let me know. Thanks.

A:Best source for a cheep, yet good 17 inch flat screen monitor..?
Relevancy 70.52%

I am having some issues with my used flat screen monitor that I recently got. I plugged it in and turn on my P3 Desktop. The desktop is too big for the screen and the color is all wacky. I right clicked on the desktop and got to the 'properties' I then went to the tab with the monitor settings. It will not let me change the dimensions it stays on 800 X 600 and it won't let me change it to anything else. Also the color options is not like the regular 256 or thousand or million colors it is something completely different.

Does anyone know how to fix this issue? I have actually 2 monitors that do the same thing.


A:Solved: Certified Data 14" Flat Screen Monitor

Update your video card drivers.
Relevancy 69.66%

Im an expat living in Veracruz Mx and have used Samsung monitors for many years in the US I recently monitor flat plate screen white N problems..solid Samsung 701 purchased N monitors after months failed for various reasons I returned them to Samsung here and months later they replaced them with N s That was Samsung 701 N flat plate monitor problems..solid white screen months ago Yesterday I switched one of them on and it came up with a solid white screen all pixels on I disconnected the monitor from the desktop and connected it to the laptop and same result Additionally with the white screen none of the on screen menus will come up nor will it display video What Im wondering is short of a hardware failure probable has the monitor somehow entered a test Samsung 701 N flat plate monitor problems..solid white screen mode which switches all the pixels on Are there not commonly known easter eggs hold down button and button for example when powering up to enter test mode that I may have inadvertently activated and if so how to reset things if in fact thats the case I REALLY dont want to return the monitor to service here because it s so lousy Three MONTHS for a warranty replacement any light anyone could shed on this problem would be deeply appreciated Thanks for the excellent forum Additionally I did a forum search before posting and was not able to find any problem like this Regards expat nbsp

Relevancy 68.37%

Greetings All - I hope someone can help me I have a IIyama Prolite monitor which has been running fine for about years but recently for unknown reasons at random times the display goes gray sometimes with vertical lines I can hear sound in the background but there is no way of getting back from this state unless I switch the PC off When I switch off sometimes if I reboot quicky then I get the grey screen Iiyama grey! Monitor goes on reboot and even hear the windows chime in the background but cant see Iiyama Monitor goes grey! anything If I leave for minutes then reboot we are fine - until the next time I have a bog standard Dell PC about years old and am running a nVidia Geforce card I have tried disabling both the integrated card and the PCI card and the grey screen happened in both scenarios I have updated the nVidia drivers and also the iiyama drivers Any ideas or suggestions gratefully recvd Thanks Tank nbsp

Relevancy 68.37%

I have just bought the above monitor but I think I might have boobed.

The maximum resolution I can get is 2048 x 1152 which apparently is due to the graphics running off the mother board. I would obviously like to achieve the maximum resolution of 2560 x 1440 but I assume I will need a graphics card.

My question is; in order to achieve this resolution, is there a graphics card that will be able to run from a 380 watt power source?

I don't need a card for games, just able to handle a photo editing program while using the extra resolution.

A:XB2776QS iiYama monitor

What type of motherboard do you have? Also what type of video cable?
Relevancy 67.51%

I have just been given a nice present, an iiyama vision master pro 510 22 inch monitor.

But there seems to be a problem, everything is tainted green, now im use to monitors or thought I was that use Red Green Blue, but in this case its just Red Blue which I assume come together to make green.

Does anyone have experience with this particular monitor, or iiyama's in general, any ideas what I can try, its one hell of a monitor and don't really want to give up on it even though it was free

Relevancy 66.65%

I ordered a new 19" monitor (see post title). But the display is badly off-colour towards some of the corners. For example, wide bands of green and purple appear against a blue windows background. Other parts of the display are perfectly normal.
It looks a bit like thin paint or dye has been spilled on the screen (this is not what has actually happened, I'm just giving you an idea of what it looks like ).
I was able to reduce the effect slightly by adjusting the on-screen landing settings, but it is still very bad. Deguassing does nothing.
I'm pretty sure the problem is the monitor, not the system.
Anyone know how to fix this?

And if you can find an Iiyama (or monitors in general) tech support forum please point me to it. I have had no luck

A:iiyama 1451 monitor display prob

Does your old monitor look ok on the system? If so I would send the new monitor back. The monitor may have been damaged in shipping. New monitors should not have color distortions in the corners.

For service try here.
Relevancy 66.65%

I use Vista Home Premium and because my monitor has irretrievably died, I am considering purchasing an old CRT monitor - Iiyama Vision Master Pro 514 - for my photographic work.

Does anyone know whether this old monitor will work with the new OS.

A:Old Iiyama monitor with Vista Home Premium?

Almost any monitor will work if it can connect to computer.
I'd worry more about what kind of connector the monitor and graphics card have. Here's the two currently used a lot:

Some graphics cards may have both like this pic
so you wouldn't have to worry about it.

If you have a DVI graphics card, but the monitor is VGA, you can always get a cheap adapter like one of these:
Relevancy 65.36%

Two times in the last week my monitor (a KDS visual sensations CRT) has come on with the image looking like an hourglass (wide at the top and bottom, pinched in the center). This happened imediately upon boot up and both times rebooting has returned the monitor to normal, leaving the computer running does not bring the problem back. Which is more likely, that my monitor is beginning to fail or maybe my graphics card (a saphire, ATI radeon 7000) is failing? Is there some way (other than swaping my monitor out and trying another as this seems so far to be an intermitent problem and may not arise when a new monitor is conected) to check and see which it may be?

Relevancy 63.64%

I have a HP vp17 monitor with a DVI input I tried to connect it to my Sharp flatscreen using a HMDI convertor cord. Connecting it was no problem but I'm not getting a signal from the monitor to the TV. When I went into the monitor menu it indicated that I could have a digtal or DVI default input.

Is the DVI port for input only? Is there a way I can get it to send the image to the TV?

Relevancy 63.21%

Hi friends.

I am not on this forum unless I have a problem.
I have a year 2000 flat screen View Sonic monitor. When I boot my computer, the monitor will try to come on but quits in few seconds. It shows black screen. LED on monitor used to stay "Green" Vs yellow or nothing at present. do you think my video card might be bad in the computer or the fuse inside the monitor is blown or monitor is bad period?

Please help.
Thanks -----

A:Flat Screen Monitor will not turn "ON"

It sounds like your system is not booting. As a quick test of your monitor, connect it to the system you are using now. That will tell you if the monitor is working or not.
FWIW I had a viewsonic 22" monitor from around the same time; it stopped working about 6 months ago.
Relevancy 62.35%

I have tried to get the Iiyama Touch Screens working with the HP t Thin Clients but unfortunately failed The t recognize the Touch Screen and t510 T1521MSC-B1 + Screen Touch Iiyama HP Windows installs the drivers successfuly and is recognized as touch device Only can't I get the touch functions working under the t and if I connect HP t510 + Iiyama T1521MSC-B1 Touch Screen the screen to a fat client or laptop the touch functions will work directly HP t510 + Iiyama T1521MSC-B1 Touch Screen after plugging in the monitor nbsp System Details nbsp HP t Thin ClientWindows EmbeddedIiyama T MSC-B Touch Screen nbsp Troubleshoot nbsp Connected to other systems Success Installed Iiyama DriversDisabled Windows Drivers nbsp It seems to be the HP Embedded Image cause if I connect the same screen to an full Win Embedded OS the touchscreen works instantly nbsp What I can find on the internet is that the t have all sorts of problems with touch screens but HP is the Company who recommends the t cause it is compatible with all touch screen models nbsp nbsp nbsp nbsp
Relevancy 61.06%

Hi folks I have bad issues with the resolution settings under W With a fresh install of W I can't move up to X the native resolution of my monitor resolution ASUS issues /IIYAMA Screen B2403 7800GTX is X I started to try some others drivers but without any success I tried to use the NV panel wich offers me the correct ASUS 7800GTX /IIYAMA B2403 Screen resolution issues resolution but when I click on the apply button nothing change or kick me out of range The exact same thing using the possible settings from the adapter properties The reason is that the refresh rate seemed to be lock hz which is too high for that resolution using VGA Some of you may say to try with HDMI cable but I don't want because I 'm also using an analog KVM It reminds me a PB I had when I installed OSX on my PC but we're talking about W here and of course it's not the same exact problem It seems to be a common problem with many of you Any solution to fix it Thanks

A:ASUS 7800GTX /IIYAMA B2403 Screen resolution issues

The DVI cable seems to be the only fix at the moment.
Relevancy 57.62%

DELL UltraSharp 2005FPW 20.1-inch Wide Aspect Flat Panel LCD Monitor with Height Adjustable Stand

i currentley have the 17 inch version to this and thinking of upgradeing think this is a good one to go with?

A:want a new flat panel monitor how is this one?

or is this one a better one to go with?
Relevancy 57.62%

I am looking for a good LCD flat panel monitor. I want a 15inch. What sort of specs do I like at to see if the monitor has good picture?

I was looking at this one. How does it look?

Relevancy 57.62%

Flat Panel Monitor Quite possibly I ve painted myself into a corner due to my ignorance In spite of that I thought I d throw my dilemma into the forum for others to chew on Getting what I considered to be a pretty good deal on the purchase of a Gateway Flat Panel Monitor FPD which required the installation Panel Monitor Flat of a DVI card it now appears that my motherboard does not have the facility to incorporate such a card Below is an overview of my system Are there any options available for me or is the return resale of the monitor my only choice Thanking you roy Operating System System Model Windows Gateway Processor a Main Circuit Board megahertz Intel Celeron kilobyte primary memory cache kilobyte secondary memory cache Board Intel Corporation FJ ZX AA - Serial Number IMFJ Bus Clock megahertz BIOS Intel Corp F JZ XB A P Drives Memory Modules Gigabytes Usable Hard Drive Capacity Gigabytes Hard Drive Free Space IOMEGA ZIPCD x CD-ROM drive TOSHIBA DVD-ROM SD-M CD-ROM drive Generic floppy disk drive quot Generic IDE hard disk drive GB -- drive Megabytes Installed Memory Megabyte Module Size - Installed Megabyte Module Size - Installed Local Drive Volumes c on drive GB GB free Network Drives Controllers Printers Standard Floppy Disk Controller Intel AB EB PCI Bus Master IDE Controller Primary IDE controller dual fifo Secondary IDE Flat Panel Monitor controller dual fifo HP DeskJet C Series on LPT Display ATI Rage VR AGP English Display adapter Plug and Play Monitor Bus Adapters Multimedia Intel AB EB PCI to USB Universal Host Controller Creative Gameport Joystick Creative Sound Blaster AudioPCI D SB AudioPCI D Legacy Device Wave Device for Voice Modem Communications Other Devices K PCI Voice Modem SF- IV R A PCI Modem Enumerator Hewlett-Packard ScanJet C Standard -Key or Microsoft Natural Keyboard OpticalMouse PS USB Root Hub nbsp

Relevancy 57.62%

Hey, I'm wondering if I should hurry up and exchange this monitor before the 30-day period is over.

Last night for a few mins it looked as though everything on the screen sort of had a trail. Like when you have the trail turned on for the mouse. Anyway, it went away a couple minutes later. But this morning when I turned it on I had the same trail type look on all the icons, and there was an occasional blink of the screen. I tightened the monitor cable but the trail remained. Then I left the room and came back, and they were gone.

Do I need a new monitor, or does this happen with all flat panels?

A:Flat Panel Monitor

It may not be the flat panel that is the problem. First check to see if this trail exists outside of your operating system. Like go to the BIOS or DOS, does it happen there too? Don't use the MS-DOS shortcut in windows because you are still running the monitor driver that it loaded. Your problem could be software related, corrupt or incorrect drivers.

If you do have correct drivers and connects, it may be monitor. I don't know it all, but this is my theory.
Relevancy 57.62%

The lcd is flashing all the time. Is there any repair for a LCD flat panel that does this.could it be a bad power supply......

A:GEM Flat panel Monitor

I believe LCD displays are backlit by flourescent lamps. It sounds like you have a bad lamp or ballast. I don't know your experience factor but I would remove the back of the display and check the lamps.
Relevancy 57.62%

I recently tried to install a flat panel monitor. When I turn it on all I get is a message "out of range" as I have not any info on this can it be installed?

Relevancy 57.62%

I want to buy a flat panel monitor...what is the minimum video memory i need

A:flat panel monitor

Generally, the requirements for LCD monitors and bulky CRT monitors are the same, but today, a good baseline would be at least 16MB.
Relevancy 57.62%

I have recently purchased a Flat Screen CRT Monitor. After connecting the monitor. I can not get straight horizontal lines. I have returned the monitor to the manufactuer thinking it was defective. They sent it back saying that it was tested and functioning properly. I have spent hours adjusting the geometry buttons on the monitor.
Has anyone ran into this problem? I think it might be the video card.
I am running a Radeon 9200 Video Card on Windows Me.

Relevancy 57.62%

Hi all. I want to replace my old Compaq 15" with a 17". What's a good one for under $200? My compaq has been reliable and a workhorse for 8 years. But it's showing signs of wear. The screen gets blurry after a couple hours. I'm not sure if I should buy another compaq or try a different brand?

A:Good . flat CRT monitor under $200?

That's a decent monitor and it's a 19" for $200
Relevancy 57.62%

I have a 17" Dell SL1 Flat Panel LCD Monitor that displays just fine when I turn it on for maybe 1 second and then blanks out. I know it's the monitor because I've connected an Optiquest to the computer and it works just fine. Has anyone else seen this with Dell monitors and what can I do to fix it short of sending it in (cost prohibitive) or throwing it out (don't want it in a landfill)?

Thanks in advance.


Relevancy 57.62%

I have dell diminsion 3000 which uses intel 82865G video card.I am looking for flat panel monitor which is compatible with my computer and video card.Any advice is welcome.Thanks

Relevancy 57.62%

Hope I am in the right forum. Can a HP flat panel be used in the place of the screen on a Gateway laptop?

A:Flat Panel MOnitor

i used a crt monitor years ago on a w95/laptop because the screen was broken and plugged it into the vga port on the back. like the connector on a desktop.
Relevancy 57.19%

My monitor is less than 6 months old. Twice in the last week it's frozen with diagnol lines of different colors, each pattern is different. I've posted on security thinking I had a virus or spybot but have found nothing. One time it happend while I was surfing the net and the next when it was unattended.

Has anyone had this problem with a flat panel monitor before?

Relevancy 57.19%

Hi all, I will be purchasing this soon and I was wondering if it's ok to leave the monitor on for a few hours (screensaver on). Would this adversely affect the monitor ? I don't think it affects regular CRT monitor life, but I'm not sure about LCD monitors.


A:Flat Panel Monitor question

As far as I know, there's no problem leaving the monitor on for an extended period. I use two LCD flat-screen monitors and have never experienced a problem. Note that if you have power management enabled, your monitor may go into sleep/suspend mode even if your screensaver is active, which definitely is not a problem.

Hope this helps.
Relevancy 57.19%

Hey thanks in advance for what i already know will be welcomed useful information to a hardware challenged newby such as myself I have a quot Microtek i know but it wuz an X-mas gift and has worked wonderfully ??? monitor saved flat this panel can LCD be Flat Panel LCD monitor my cell slipped out of my hand and hit the lower right hand corner of the monitor screen causing what i can only say looks like a spider-web pattern to appear - can this flat panel LCD monitor be saved ??? that part is very small but there are also very fine lines that extend from the bottom to the top of the screen on the right side and very fine lines that go from right to left and in towards mid screen about quot in the very bottom right corner there is a part where the background color is black still with the lines thru it but on the entire rest of the screen i can see my wallpaper just fine no problem with resolution etc just these very fine very bothersome lines where it used to be absolutely perfect My question to u is can this monitor be repaired If so is it something that i can do myself given the right information and having access to the parts im not as challenged as u might think but then again maybe Please advise look forward to hearing ur thoughts on this no way can i replace this monitor right now and really dont want to learn to live with it this way Thanks again enjoy nbsp

A:can this flat panel LCD monitor be saved ???

Sounds like you damaged the membrane, and I say it is beyond help. If turning the LCD on and off a couple times doesn't fix it, its time to explore your options and either buy a new monitor or "live with it".
Relevancy 57.19%

I have a Compaq FP-500 flat panel monitor that I want to use with a Dell Dimension XPST500 tower. (Bottom line is I have a working tower from one system and a good monitor from another one.) My problem is the connector from the monitor cable is not compatible with the monitor outlet of the Dell. In looking at my Compaq manual, it says the input terminal is a 20 pin, mini D connector. The female connection on the Dell is the typical 15 pin variety that a monitor (not flat panel) plugged into. Is there some way for me to be able to use this flat panel with this tower? Any help greatly appreciated on how I would do this.

A:Flat Panel Monitor Compatibility

Get a video card with a DVI socket on it or find a dvi to vga adapter.
Relevancy 57.19%

Has anyone had this problem ?

My monitor has had one of those Storm fly's (little splinter size bug ) crawl into the screen, does anyone know if I can remove it somehow, I'd be grateful for any idea's.
Thanks Adrian

Relevancy 57.19%

Do you like a Dell ultrasharp 1704fpt 17-inch flat lcd monitor with height adjustable? It costs 235.00 because of 25%off?
Relevancy 57.19%

Is the contrast ratio the important thing when looking for one of these? And under "description" on them, I see ie 12x10 alog or 12x10 colum, what's the difference between alog and colum?

Thanks, it's a little confusing when pricing them.

Relevancy 57.19%

I just bought a LiquidVideo 15" TFT-LCD 1024x768/XGA from Circuit City. I've hooked it to my IBM ThinkPad 1411-411, and the text is fuzzy. When I change from 800x600 to 1024x768, the text sharpens, but there's a ghost image like on old TV signals. There are no XGA drivers on my computer. Is this what I need, and if so, does it have to be a driver from LiquidVideo, since I can
't find them on the web and Circuit City, so far at least, can't help?

If this isn't the fix, any other ideas are most welcome.


A:Fuzzy XGA flat panel monitor

Can you try it with another machine? It should be crystal clear with no ghosting
Relevancy 57.19%


I'm looking to get a flat 17 or 18' flat panel monitor and would like some advice. I will only be using this monitor for the internet, print shop, word processor..etc..I will not be watching movies or on this....occasionally I might play a game , but not too often. I keep reading about a DVI cable and video card to make it look better , but I don't think I need it. I need a reccommendation for a 17 or 18" flat panel ...Thanks a lot!!


A:flat panel with decision

Hi shim,
If you can afford it and really want a flat panel go with the 18. But,in my opinion, a CRT 17 or 19 flat screen would do the job at a lot less money.
Relevancy 57.19%


I was on the computer last night when my power flicked. It shut my computer off. So I turned it back on...and ever since then, (which was last night) the colors on my monitor have been different. I believe the colors are dimmer.

For example, when you search something on Google...that horizontal bar that runs across the screen that displays the number of results your search contains...well that bar is nearly pink/purple!

Any ways I can maybe fix this?

I have an LCD Flat panel monitor. It's a Northgate computer if that helps anything.


Relevancy 57.19%

I am currently experiencing a problem with my monitor and I am at a loss to explain the cause I have a Liquid Video quot flat panel and as of three weeks ago panel) problems (flat Monitor it has begun to quot blip quot out intermittently There is no regular pattern to it and I can find no specific action that causes the monitor to act up I have tried updating the video drivers to no avail Monitor problems (flat panel) The video card has been replaced due to out-dated-ness also to no avail In order to test the monitor it was hooked up to another person s Monitor problems (flat panel) computer and the monitor works perfectly The computer was originally built by CyberPower Inc in Since that time the MoBo video card memory and two hard drives have been upgraded or replaced Am currently running W K Processor is an AMD Athlon Thunderbird Ghz and has GB memory with a GB and GB hard drive Vid card is GeForce FX with MB memory I would appreciate any help available and if there is anything I have missed please let me know nbsp

Relevancy 56.33%

I was prepared to purchase a Dell Ultrasharp inch monitor for a system I am currently building when someone suggested that I consider a Dell inch LCD TV monitor instead screen of TV a couple of inches shorter in height but a couple of inches wider They said it would function the same but would allow me to split screen documents view two pages at once and be better LCD TV Monitors: Panel LCD Flat Monitor... VS Digital for video LCD Monitors: Digital Flat Panel VS LCD TV Monitor... viewing movies presentation videos etc I do biomedical research so my primary use for this new monitor computer will be statistical analysis medical and financial programming SAS SPSS EXCEL internet research digital picture analysis MRI CAT ultrasound images etc digital video presentations and analysis and non-work related DVD viewing and music recording burning and listening all work and no play gotta have a life too o I d really appreciate help to know which monitor system would be best for these uses Would there be any difference in refresh rates or letter clarity documents Ultimately I guess I am wondering about the pros and cons of each type Thank you very much once again for your help TV ms response time contrast nits brightness x WXGA native resolution display quot x quot x quot http www us dell com content pro c us amp cs amp l en amp s dhs amp tab specstab tabtop LCD Monitor ms response time contrast nits typical brightness x Pixels max resolution Diagonal Size quot http accessories us dell com sna amp sku - amp category id amp c us amp l en amp cs nbsp

Relevancy 56.33%

I purchased the Dell Computer and Monitor exactly one year ago. For the past two weeks, I have intermittenly experienced the following problem. After having the computer and monitor on for approximately one hour or so, a flashing occurs every 2-3 seconds or so, as well as a thin, black horizontal line at the bottom of the screen just above the task bar. I have nothing near which would cause interference (microwave, etc) and there are no loose connections which I can see. Does anyone have any idea what the problem could be? If so, how to correct it?

A:Dell E198WFP Flat Panel Monitor

I would suggest trying a different monitor to rule out either the video card or the monitor. If it happens with a different monitor then swap out the video card for a new one.
Relevancy 56.33%

I just bought a Dell flat panel monitor and am having problems I am using Windows SE mb of RAM and I think that the video card is NVIDIA TNT M xAGP The monitor works fine when I am viewing a webpage and the page is still The problems occur when I panel monitor Problems flat new Dell with scroll using either the mouse Problems with new Dell flat panel monitor or the arrow keys On a webpage Problems with new Dell flat panel monitor with a white background and blue links the blue Problems with new Dell flat panel monitor links turn aqua turquoise as the page scrolls The white background has a bit of a blue cast due to all of the turquoise When I am viewing a webpage with a dark background sometimes the part that I am scrolling gets very dark and the wording is almost illegible Everything goes back to normal once I stop scrolling and the page is still It is as if when the page is scrolling there is extra quot white quot behind the monitor I know this sounds nuts but this is the best way to describe it This is the second I received from Dell I sent the first one back because I was sure it was defective This one is doing exactly the same thing Is it my video card Drivers I am not a computer guru and Dell is not being at all helpful in trying to come up with an answer Thanks in advance for any help Lisa nbsp

Relevancy 56.33%

Good selection of electronic items to chose from
Click HEREHave to click on the offer you want and follow the steps
Relevancy 56.33%

I am a graphic designer and I am looking to buy this kind of monitor - all sites that review and CRT monitor models have out of date recommendations (2002 was the best I could find)

looking for fair price 19" FLAT! CRT with high resolution and lower dot pitch .

Thanks, the lemurian.

A:Looking for a professional 19" flat CRT monitor for graphics

I have this one and love it:
Relevancy 56.33%

I just bought a new 17" flat panel monitor by SVA. I tried it on a machine at work, and on 800X600 resolution everything looks great. I took it home to my personal computer, and the 800X600 setting makes things look smeared or tiered. The higher settings (1248Xsomething) work OK but everything is too small. I have the ATI Radeon All-In-Wonder video card at home, and both home and work are set at 75MHZ refresh rate. Any ideas why it won't show up clearly at 800X600? Thanks

A:Wrong Resolution on Flat Panel Monitor

Have you tried 1024x768? That works fine for me at a 75hz refresh rate -- and using an ATI Radeon 9700.

At 800x600 -- is it web pages that are smeared, particularly when scrolling, or the desktop itself? If web pages or text, then the problem may be with the video driver installation -- see if there's an update available.
Relevancy 56.33%

Suddenly my monitor quit working a couple days ago. I guess it's about 4 or 5 yrs old. Never a problem until Sun a.m. When I got up my computer was dead. Put a new power supply in and then everything worked. Checked my e-mail and later came back and the monitor wouldn't work. I have a new moniter now, but wonder if there is any way to trouble shoot the old one. I don't know if they are worth doing anything with or not.
Relevancy 56.33%

Hi all Recently my Dell flat-panel keeps turning Dell off monitor flat-panel monitor has been turning off on its own green power light does not light on Dell flat-panel monitor keeps turning off I ll push the power button Dell flat-panel monitor keeps turning off back on and the screen will come back on for a split second and then turn right back off On some tries it doesn t even come back on I tried plugging the monitor power cord into another outlet and I am still havintg the same issues I do not have an extra monitor to test to see if the problems occurs with another monitor I don t know if the monitor is overheating if that s even possible Or if it just old and needs replacing The monitor is probably years old Right now I ve left the computer shut off for a few hours and I haven t had this problem recur tonight yet I don t see a model on the screen but if anyone needs additional information I can gladly try to provide Thanks in advance nbsp

A:Dell flat-panel monitor keeps turning off

Cheaper to replace that 5-year old. You got your money worth out of that display.
Relevancy 56.33%

I am a graphic designer and I am looking to buy this kind of monitor - all sites that review and CRT monitor models have out of date recommendations (2002 was the best I could find)

looking for fair price 19" FLAT! CRT with high resolution and lower dot pitch .

Thanks, the lemurian.

A:looking for a professional 19" flat CRT monitor for graphics

It's hard to find CRT's these days as most people go flat panels. Dell makes the best bang for the buck flat panels if you're considering going this way.

Other than that, we just bought a Samsung SyncMaster 19" as these are some of the most readily available and fair price 19" true-flat screen monitors. We're extremely happy with it.

I was always a hardcore Sony fan, but you just can't find Sony CRT's anymore...

Edit- here's a link to the one we got. It's FLAT (as in totally flat), .20 dot pitch, 1920x1440 resolution,