Windows Support Forum

Microsoft Works Database printing issue

Q: Microsoft Works Database printing issue

Hey all. My dad is having an issue with his computer that I've been unable to figure out, whether by my own means or just by searching. He is running Microsoft Works 6.0 on Windows Vista 32bit Home Edition, and is having some trouble printing from Works Database, which he uses quite a lot.

Whenever he tries to print something from Database (or go into print preview) he gets the following error:

The printer driver is missing or not valid.

Run the Windows Setup program to install the printer software again.
Naturally I have uninstalled and reinstalled the printer several times, but to no avail. Also an important note: This issue ONLY happens with Works Database, and not with any other product (Microsoft or otherwise).

If anyone has any suggestions it would be greatly appreciated

Relevancy 100%
Preferred Solution: Microsoft Works Database printing issue

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link (This link will automatically start a download of Reimage that you can save to your computer.)

A: Microsoft Works Database printing issue

I have been doing more research and I'm starting to think that there is just a compatibility issue. I'm still wondering if anyone knows how to make this work with Vista.

If anyone has any suggestions on a program that is an alternative to Microsoft Database, that would also be pretty helpful. It's the only program my dad uses from the Works Suite.

Thanks again...
Relevancy 100.19%

Since installing Windows 10, I need to print a DVD database that I created on Microsoft Works Suite 2005. The error message I receive is "no default printer" or some such wording. The default printer IS set, and printing from any other site or app works fine. The laptop is a Lenovo, and the printer is Kodak. However, I do not see that the problem is in either of those, since it prints other things. When I look at compatibility for Windows 10, it reads that the Works 2005 is compatible. Please help, as frustration abounds. Thanks.
Relevancy 81.7%

I have an address Works printing... Database book in the MS Works database which I use for mailing Christmas cards Using the quot older quot versions of Works it was very easy to set up the printing of envelopes in a batch process then just stuff in the Christmas cards amp lick the stamps I don t remember what the older version number was that enabled envelope printing as I have since sold my older computer Now that I have upgraded to a newer version of MS Works Ver I find that I cannot figure out how to print envelopes from the same database which I have imported to this PC Not only that but there is no Works Database printing... option in all the tabs for quot envelopes quot as there is in the earlier versions of Works My question is is there some work around or secret that I am missing here or has MS screwed up again and left that option out in the newer versions BTW my wife s laptop has version of MS Works and there is no envelope printing in that one either nbsp
Relevancy 77.83%

[ I have a dell 4700 running windows XP home edition. It came with quatro pro and word perfect software. I had one HP 3745 printer and everything worked fine.
a few months later I bought Microsoft Works Suite 2006 and installed it. Everything seemed to be OK. A few months later I bought and installed a HP all in one scanner 1600 series. Everything running fine.
Yesterday I tried printing some data from Microssoft spread sheet and I got this message.
Printer driver is missing or invalid. Run windows setup program to install printer software again.

All other applications print with no problems. What can be wrong here?

A:printing Microsoft database

When you have the "Microsoft spreadsheet" (whatever that is, assume the Works spreadsheet?) open, select File-Print and see what printer is selected as the default?
Relevancy 76.54%

i have the latest version of works and am having a problem with it.

when using the left scroll gets "stuck" therefore not allowing me access to several of the fields on the left side of the document

i have played around with it and can't seem to get around it

can anyone help?
Relevancy 76.54%

Hi, I want to create a database of Asteroids with extensive information in one or more fields but I can't figure out how to expand the fields to allow this. On my dinosaur Tandy the database I had would create records just like index cards. I loved it. Any idea what I need to do? I've already tried the help and clicking everywhere.

Thank you.
Relevancy 76.54%

Does anyone know how many record entries (not fields) are possible in a MWDB file? I was working on an inventory list when suddenly the database would not accept any more entries. I didn't know if the was a limit. Is there any database that has no limit as to entries?

A:Microsoft Works Database

I know microsoft access 2003 used to be a file size limit of 2GB - so would not expect works to be bigger (although, not yet found the spec)

Whats the filesize you currently have?
Relevancy 75.68%

How can I get my MS Works database files to be able to be transferred to another program such as Open Office or Office? I have a lot of collected information in many files that I can't share with anyone else who doesn't have Works. The Office Database is far too complicated for me and much more powerful than I need for my own use.

A:Microsoft Works Database files

Did you TRY exporting?

A typical choice for database conversions is to export -> CSV format and then work with that
to create the imports. Hint: Export only one TABLE at a time.
Relevancy 75.68%

I am working with the Microsoft Works Database program that comes with Windows XP. I am listing a number of books, their isbn's and their prices. I evidently punched a wrong button because now every time I enter a new book the price from the previous entry is automatically entered for the new book. For example, if the price for the previous book was 19.99 that is automatically entered as the price for the next book.

It's not a big problem, because I can override it by simply entering the correct price, but still it's annoying. Anyone know how I can undo this default price setting?



A:Problem with Microsoft Works Database

Look in the Options of the program.
Relevancy 75.68%

Hi, I have a large list of items in a database that are numbered using a numbering row.They are then filtered to match certain criteria.So now the number row is no longer consecutive.What I want to do is make a new number row that tells me the occurence of each record happening.For instance,if my database stats at number 3 then the next number is 7,i want to have 7 -3 to give four.Basically,I want to know the distance between each record.If I could use a formula for the whole number row that would take a record and minus it from another?Thanks JIM

A:microsoft works database question

Help me please
Relevancy 75.68%

Hey there Hope someone can help me out having a very perplexing problem that is happening in Microsoft Works with a database that my work has been using over the years without any problems The only way to explain it is that when you work on the database one day the next day some of the information disappears in the report view mode no one is deleting it The columns A to F seem to go missing Now A-F are the ones containing the data I need I dont know if makes any difference if I were to put that missing information back into those cells into columns from H onwards How can I get those missing A-F columns back Works problem Microsoft database Does anyone have any idea why they go missing periodically Just recently after a hardware upgrade this has started to happen I know that the version we are using of Works is Would upgrading the software help this problem Would appreciate anyones input greatly nbsp
Relevancy 74.82%

After a major crash I lost all of the Works Suite and had to reinstall it. Now the database crashes everytime I try to use it. Norton intercepts the crash and gives me this message:
Everything else in the Suite works fine.
I need some help.
Thank you

Relevancy 69.66%

I have Works 9 on a Dell Inspiron with Win 7/64. I also have a Canon Ip90 printer.

My printer will work EXCEPT from within a Works document. I can print from Works help etc. but from within a Works document the printer processes the paper through and prints nothing. Good for low paper usage but frustrating when you need a document printed.

I have reloaded Works and drivers.

A:Works 9 printing issue

According to Microsoft you need Works 9.7 or later for Windows 7 compatibility.
With versions prior to 9.7, compatibility is "variable" .
Relevancy 69.23%

Hi. I'm helping my grandparents with their new laptop and am showing them how to use the Works Word Processor. For some reason, after the first time we send something to print with multiple copies, it will only ever then print 1 copy even when you specify you want more. Has anyone come across this before and know of any solution, as its very annoying to have to print single sheets each time! Thanks in advance
Relevancy 67.94%

I recently purchased a used C E Kyocera color MFP to use as my sole printer for a home business network I am having printer issues We - Works Issue Network USB Fine Printing have a dell laptop and desktop PC running Windows Vista and they print just fine to the new Printer Copier The issue is that my Toshiba laptop - bit running Windows thinks the printer is offline on the network When running diagnostics it says the printer is turned off Now when I hook up a USB cable to it the printing works as it should Unfortunately this is not the solution to my problem I need to be able to quot Scan to PC quot images from the scanner I don t think I can do this through a USB connection I have not contacted Kyocera or Microsoft about this as of yet One will just push the blame on the other I have been down that road before with different manufacturers I am not a computer guru by any stretch and am an absolute novice at networking I haved tried dropping firewalls changing network ports on the router changing network cables Actually found a bad one printing through something other than Microsoft Office apps removing and reinstalling drivers many times All computers show up on the Network Printing Issue - USB Works Fine network so the router is identifying the Toshiba Confirmed I am printing through the TCP IP Confirmed the copier setup with the network IP address it works on the Vista computers grasping Is there a way to quot ping quot the printer through the Toshiba Remember novice Unfortunately I know what I don t know almost EVERYTHING about COMPUTERS other than to point and click and that is just enough to be extremely dangerous Any help would be appreciated nbsp

Relevancy 67.51%

Hi all I ve amended the MS-supplied Order Entry database for my own use and for the last years of running my small business Entry issue Access Default Order Microsoft database I ve not had any issues with it However I ran the Receivable Ageing report Default Microsoft Access Order Entry database issue a couple of days ago to let one of my customers know what amount he had outstanding There were amounts in Current - days amp - days He s made a payment today and I ve allocated that payment across several invoices but having run the query again I find that there is still an amount in - I ve looked I m the Order Entry table for balances that aren t but the only ones I can find are within days I ve been into the Payments table the Order Details table etc but cannot for the life of me find where this outstanding value relates to Is there any way I can modify the Receivable Ageing query to include order numbers which show the orders that generate this amount I have two invoices for that exact amount but both are showing as paid in full Any help gratefully received Martin nbsp
Relevancy 64.93%

I have setup a wireless network in my house. I have a desktop PC running XP and a Dell Laptop running VISTA connected to a wireless router. I also have my HP printer connected to the wireless router via a print server. All works fine except when I attempt to print a Word document from my Laptop, the document appears to goto the printer, but does not print. Do you have any suggestions as to how I can correct this issue?

A:Microsoft Word Printing Issue

Sometimes the same thing occurs with my HP All in One. This is what I use:
HP Diagnostic Utility

Download it, then install it on the computer to which the printer is directly connected via USB. You can run it whenever any problem occurs (like the document doesn't prin, etc.). It'll show you the problems that are affecting the printing. Select the issues and click on "fix".
Relevancy 63.64%

I am having problems printing in landscape from Microsoft Works 7.0 spreadsheet. It does not print in landscape and I get an error message that says it is out of memory. I updated the printer driver (HP C4280 photosmart), so I am out of ideas. I did read a rumor that this printer is not compatible with works 7.0. Is there any other patch I can download to help this situation. Re-installing the program is not an option in this case.


A:Microsoft Works 7.0 Speadsheet issue

Not sure if this is what you are looking for- but have you tried one of those .pdf "printers" like .pdf-Creator or Cute-pdf?? They install like a printer and when you want to create a file you do it as though you are printing-- it creates a .pdf file which you can send to anyone and they can read it with Adobe Reader (or Foxit).

You could then print from the .pdf with your .pdf reader--- or, just send the info as needed.

That might make Works more usable in your situation.

You could also consider a more standard spreadsheet program like the free OpenOffice which has its own open standard format (as well as saving in Excel format, if needed).

Relevancy 56.33%

WORKS SPREADSHEET QUESTION I m trying to figure out a way to use it to catalog my collection of RPM records but am stumped Basically I Works Database want to be able to sort them by record company or title or artist each data field think that s what its called -- I m totally unfamiliar with spreadsheets would contain at minimum something like this but would have room to expand a field if needed to get more data into it re a disc or the performer s DISC TITLE quot Espagnol Waltz quot Performed Works Database By Works Database Samuel Siegel Instrument Mandolin with Piano accompaniment Recorded Probably May Company Victor Talking Machine Company Label Master Take If known Comments Disc title is announced as quot Waltz Espagnol Mandolin Solo by Mister Samuel Siegel quot On some disc s the master take field may have to letters amp numbers in it But I cant get enough column width to type the info into A thru K amp have came to a stop nbsp

Relevancy 56.33%

I am working on a database for our Ambulance Company. One of the fields I am having trouble with is writing a formula to calculate response times when time enters another day.

Example, we use military time therefrore, 23:59:00 would be 11:59 pm. If we run the call till 00:10:00 ( 12:10 AM) the formula I have written ( = Arrival Time - Responding Time) gives me an invalid time because it doesn't recoginize I have gone past the current day into the next day.

Please help me figure out how to formulate this field.

Thank You.

Brett F. Murphy,
Paramedic Supervisor

Warsaw - Lincoln Ambulance District

A:Works Database


Working With Overtime Hours In Excel will show you how to write the formula in Excel.

It should work in in Works, but am unsure, as I do not use Works.
Relevancy 56.33%

How can I export records in database to print mailing labels? or get the database to print them?

A:Works database

don't have works anymore (like a looong time ago) but since it's an Office-Lite product hopefully there's some similarities

maybe try the help feature for:
mail merge

in the database and word processing software (it's likely the same help file, so it may not matter)

here's the detailed FAQ page and
here's one about works 3 and creating labels

sounds fairly similar to the office procedures

good luck
Relevancy 56.33%

Can anyone tell me how to set the print area in "Database"? I want to print a form which shows lots of names down the first column, and then has a blank "Signature " column next to it, but with horizontal gridlines to take their signatures.

When I look on "Print Preview" it only shows the "Names" column, and I can't get it to print a column next to it. If I remember corectly, there is a facility in Excel for this, but I can't find it in the Database application.

Any help would be appreciated.


Relevancy 56.33%

First time try. MS 98, Works database, MS Word file with a zillion names,addresses,ph#s,ect. I copy a name in Word, try to paste into a cell in d/b, I get "<picture>" in the cell, not the info I copied. Ive read the help files in Works, the archives in here. Any help will be greatly appreciated. Thank You. Andy

Relevancy 56.33%

When trying to print Access reports from a VB.Net application I get the following message:
"An unhandled exception of type 'System.NullReferenceException' occurred in AccessPrint1.exe
Additional information: Object reference not set to an instance of an object"

This refers to a line with the folowing code:
oAccess.DoCmd.OpenReport(ReportName:="ProductsList", View:=Microsoft.Office.Interop.Access.AcView.acViewPreview)

I have checked all Microsoft's info on this and tried various alternatives. No luck.

There are various correspondence on the internet from guys experiencing the same problem. Any suggestions.

My configuration is: Windows XP Home, Office 2000 Premium, VB.Net standard.

Thanks a lot.

Johann Smit
Cape Town
Relevancy 55.9%

We are trying to help out a friend here, and hoping someone can point us in the right direction.

We need to create a database, preferably a works database, because that's the program both of us have. What we need to do is collect statistics at the end of the day, and save all the results to one database. At the end of the year, we need to be able to go back in and total all occurrences of a particular statistic and combinations of certain statistics together.

I am TOTALLY GREEN in this area...can anyone help?? All suggestions are greatly appreciated....if more info is needed, please let me know!



A:Will a works database work?

Works will only "work" if it has an actual database like Access to enter your data into. You can set up one database and enter the data there directly. If you are on a network you can share the database and have forms set up for data entry. If you are in different locations you could use some kind of program like PCAnywhere and the remote person could dial in and do data entry on the database. There are way too many options so you might want to give us soem kind of idea on what your setup is and how to accomplish it.
Relevancy 55.9%

I have some Microsoft Works Database files I'd like to continue using, although MS Works has long disappeared. Does anyone know of a conversion technique/program to make these DB files usable with Microsoft Office. Seems like a step backward to not allow some kind of conversion for these files. I really liked Works DB.
Thanks in advance for any suggestions.

A:Update for Works Database

What version of Works was used to create these files and what version of Office are you using now.
Relevancy 55.9%

Been using Works for years and have never had this happen before. If I make a change in the database and try to SAVE, the program just closes, no error message. I re-open and the changes obviously have reverted to original state. I have run AdAWare, Spybot, AVG is up to date and runs nightly and am clean. I reinstalled MSWorks (just over the old program) and thought it was fixed, but now it is doing it again. Very frustrating Yes, I do get the message about more than 500 fonts, but since I have XP, I have been told that this is not critical anymore. Any ideas or suggestions? ... Millie in KY

Relevancy 55.9%

I have been tryin to sort records in WORKS 4.5 for 4 years now and it always sorts ALL the records. I have tried the highlight trick and even put blank records where I want to stop the sort. Does not work.

Can someone tell me how to sort, say, the 15 records in the middle of my database and not affect the other?


Relevancy 55.9%

For some obscure reason I cannot open some (not all) of my works db files.

I have downloaded the patch (KB933828), which is supposed to fix it but although it downloads ok, I can't seem to open the patch!

Can anybody help please?

Thx. Simon

Relevancy 55.9%

When I try to format a Feils, the program crashes. Downloaded KB933828, but it won't load. PaintShop Pro says it isn't a "valid MSP file".

Someone suggested that Works 9 works better on a Vista Home Premium machine.

Is that true?

Relevancy 55.9%

I'm using Works 2000 V.5 on 98SE. Want to retain grid lines when printing Also would like to create a custom form- none of the examples are useful.

A:Works 2000 database

I have that version, there's doesn't seem to be that option. As an alternative, try selecting the records and applying left -- right -- top -- bottom borders (via Format -- Border).

EDIT: my mistake ; File -- Page Setup -- Other Options.

By "custom form", do you mean an input form, like Access? Don't know, will look it up.

Relevancy 55.9%

I have an extensive list (about 400 entries) in which I would like to create a database and print mailing labels for each entry... is this possible in Access or am I wasting my time?

A:Solved: Printing labels using Access database?

Yes you can use Access, after you create your table look under reports, you should see the label wizard, follow the steps. You can select from common Avery type or customize the size.

It works great I have done it many times.
Depending on your Version of Office, Word will install with the Avery Label wizard ( Better than Word's labeling). .. this is also Handy in that it will link to an Excel List and link column headings
Relevancy 55.9%

I have created a database for mail merge purposes in microsoft word

how can i print the database??


A:Printing Mail Merge Database in Word

jim, you should be able to hit File-Open, double-click My Data Sources under your My Documents folder, and it should be there. What did you name it?

What version of Office/Word do you have? And do you have the whole Office suite or just Word?
Relevancy 55.04%

I have completed my database. I put one column in alphabetical order, and proceed to another, the column I just alphabetized goes back the way it was. They won't all stay alphabetical. What's the deal? Help?

A:works suite 2003 database

This happens in Excel too, putting a column in alphabetical order is assumed to mean that you want all the rows to still contain the original values.

In Excel, you can highlight the data in the column and this sorts only that column - Then move on to the next column, etc.

If that doesn't work in Works, you may want to
sort the first column,
cut and paste the remaining columns into separate worksheets (one column, one worksheet) and
then sort them,
then copy them all back...
Relevancy 55.04%

Hi, hopefully this is the proper forum,but if not, perhaps an administrator would move it to the correct one. Anyhow, I've sent a MSWorks database file to an associate & he doesn't have works on his system, therefore has been unable to open it.(wdb extension) Can anyone provide me with the info of a possible download "viewer" that would enable him to open & print it?
Thanks in advance, Ben

Relevancy 55.04%

Does anyone know of an app that will open the above, apart from works! and preferably free?

A:Works Database File Viewer

For anyone whose interested/had the same problem it seems that there is no such thing as a "viewer" the best option though I've yet to try it is to save the file as a .csv and open it with open office. If you just want to view the data and copy and paste what you want it can also be saved as a text file - this is all assuming you or someone has access to Ms Works, as a last resort you can open the .wdb file with notepad or wordpad though its a lot more messy to access what you want. - hope this helps.
Relevancy 55.04%

I recently installed Works 6.0. I have just composed a database document containing two columns of information. But when I print it, only the first column gets printed. I'm not aware of having done anything to cause the program to print less than all of the document. I have fooled around with the Select buttons and various other buttons but to no avail.

A:Works won't print all database columns

grandpaw7, you dumbell. You have the column too wide. If you bring the right hand margin of the column over to the left enough, you'll be in good shape.
Signed, grandpaw7

TO grandpaw 7: Well, I'll be dadburned if you're not right! But the dumbells are those guys who didn't program Works 6.0 to tell me the problem, but instead just decided not to print the column if it was too wide.
Signed: grandpaw7

Relevancy 55.04%

I have a databace in works database .wdb and need it to be a ms access .mbd file how can i do this seemingly simple task please?

A:convert works database to ms access?;en-us;q197894
Relevancy 55.04%

Can anyone please let me know where I can get for free an easy to setup download counter(a counter that counts how many times a certain files been downloaded), which also uses Access Database(s). Or, brendandonhu, if you don't mind, could you make one for me and post the source??? You'll need the following to connect to an access DB:
Set oConn = Server.CreateObject("ADODB.Connection")
sConnection = "Provider=Microsoft.Jet.OLEDB.4.0;" & _
"Data Source=\\premfs7\sites\premium2\membername\database\YourDB.mdb;" & _
"Persist Security Info=False"



Relevancy 55.04%

I want to create a new database using 'MS Works' 6.0 under Windows XP Home. I follow the 'Wizard's' instructions to launch "Create new blank data-
base" but I get no 'dialog box' from which to enter my new parameters. It just
gives me the last database I was observing. The 'wizard' tells me this is where I can make settings to configur my database to my needs, but it's not there. Am I doing something wrong, or is it a software problem?

A:MS Works has no 'Create Database' dialog box

I have MS Works 5 on one computer and MS works 7 on another, but they are both very similiar in the way they work. If you launch the MS Works Task Launcher and chose Works Database and then click on Start a blank database the box will come up for you to put in Field one -then add Field two, etc. (If a box comes up offering to show you what do to, just close it.) There are some differences between v. 5 & 7 when doing a mail merge, but that was not your question.
Relevancy 55.04%

Hi All,

Right now my "database" is a Word merge file that I use to insert merge fields in all my word documents, it's a bit archaic and slow, plus, there is no way to integrate with Outlook 2003. I tried Act! 2005, and its slow and clunky and wont work for my needs. I want to still be able to use all of my Word documents and all of the merge fields in them as well as update the database from Outlook, send emails to a sorted list, etc. Any suggestions?

Thanks, Roger.

A:Need database that works with Outlook and Word

To Roger:
Do You Have MS Office Suite installed on your computer? If so chances you have Msaccess, and i suggest you use access for your database. If msaccess is not installed get your office suite cd out and install the software. There is a learning curve, but give it a go and post your questions with the version of access your using and chances are someone will help.
Hope this helps, Flixx.
Relevancy 55.04%

Use XP OS and Works Got the following error message when I tried to open my document which I d been working on all day It is my time sheet and now I can t open it and I ve lost ALL my billing for October I ll donate Works message MS error database big bucks if someone can help Microsoft paid support MS Works database error message is a joke This has been a problem with earlier versions according MS Works database error message to my Google search but was supposed to be fixed with the version - but obviously MS Works database error message it s still an issue Here s the error message There was a serious error loading the data Your document appears to be damaged Works will stop loading the document with what was read when the error occurred Please try loading a recent backup copy of this document My backup won t open either so I m really screwed I m serious about the donation Please help me get this file opened Thanks in advance for your help nbsp

Relevancy 54.61%

hello all, i have one doubt. will LIMIT clause works with MS-ACCESS database? if it works the please explain how it will works....
i tried a lot by giving LIMIT clause in SELECT statement but every time it will give error. and when i remove that LIMIT part it will work fine.

pleeeeeease some body knows pagination in PHP with MS-ACCESS database support? please provide me that code,, plz.....
Relevancy 54.61%

I was just dragged into the st century not sure I like it at all Win was near values to 9 database ms to from copy spreadsheet works trying - death so I purchased a new computer with Vista bit but that's another story I have used MSWks for years and know my way around it Having a problem with MSWks - have a bank deposit system set up using a database for deposits with reports created that print my ms works 9 - trying to copy values from database to spreadsheet deposit slips and a deposit summary With MSWks I was able to copy values from my deposit database to a spreadsheet that was designed to act like a mini calculator - copied list of checks from deposit and used formula to total then copied total and pasted it back to database In MSWks if I try to copy values from deposit DATABASE and paste to a SPREADSHEET it arrives as a graphic instead of a numeric value so my formula that forces the spreadsheet to be a mini-calculator will not work Is ms works 9 - trying to copy values from database to spreadsheet there any way to defeat the quot paste as graphic quot It was really a timesaver for me I did try to install MSWks on Vista machine and was successful But ran into a lot of problems with both programs on my computer Decided to forget about the recording function and tough it out with MSWks Thanks tbach
Relevancy 54.61%

Please can anyone tell me how I can place the current date in a report generated by Works 7.0 database programme?

A:Works 7.0 Database report current date

"&d" or "&n" (no quotes) in the Header or Footer. Prefix with "&l" or "&r" if you don't want it centred.

Relevancy 54.61%

I'm wondering whether I can filter by date.

My case: I want to make a database filter that only shows coupons that haven't expired yet and also haven't been used yet. I can deal with the used part, but I need a formula type thing that lets me only show coupons whose expiration dates > today's date.

Is this possible? Or would I need access?

A:Works 7.0 Database Date Function in filter?

Field Name e.g. "Expiry".

Comparison ; is greater than or equal to.

Compare to ; INT(NOW())

In Formula View,


Relevancy 54.61%

Working on a Database program, and misspelled name of a field -- Cmopany instead of Company -- and cannot find a way to correct this without having to cut and paste everything already in this Database to a new one!

Is there a way to correct spelling errors in a Field Name, and if so, how is it done?

A:Works DataBase 6.0 ... How Do you change Field Names

Howdy. If I understand you correctly, select the table, then right-click and choose Design View. On the left is the name of each field. Change it there. When you try closing it, it will ask if you want to save changes. Obviously, Yes.
Relevancy 54.61%

I downloaded some Microsoft updates, rebooted, and now my Microsoft Works Calendar won't come up. I've been to MS website and tried their fix - it didn't work. Next option is to delete Works and reload. My question is - will this deletion get rid of all of my data files along with the program? Also, is Outlook Express part of Works? I've tried to find out, but can't. I'm really concerned about making a mess of things.

A:Solved: Microsoft Works Calendar -works cannot access one or more files.......

Outlook Express is not part of Works.

What version of Works do you have and is it supported by Windows XP?
Relevancy 53.32%

Hi all - running WLM on my clone fine new initially - Database then on vanishes works WLM machine Windows Netbook using accounts - all perfect Needed a clone on my Windows Desktop machine with exact WLM Database clone on new machine initially works fine - then vanishes Database Navigation and Folder Tree for same accounts as a final message destination setting my Netbook to quot Leave messages on server quot for mobile usage So Installed WLM on Desktop fine Copied cloned Database from Netbook over to AppData Local Microsoft Windows Live Mail Worked immediately like a charm all folders and messages in exact WLM Database clone on new machine initially works fine - then vanishes same folder tree and accounts passwords WLM Database clone on new machine initially works fine - then vanishes to input manually one OK Hurray However after - shut down start-ups of WLM the entire folder tree collapsed into a basic tree consisting of just basic INBOX DRAFT SENT Unwanted Mail Deleted for each account showing no messages although all cloned data was still resident on disc in its correct above location No way to retrieve nor show any messages nor the intended navigational structure - vanished although data was in its original location Uninstalled WLM delete clone Database did the whole operation over again and hey presto everything back OK After - shutdowns startups of WLM the navigation Folder Tree collapsed back into basic -line account blocks not showing any messages although all of them still reside in AppData Local Microsoft Windows Live Mail What is this How can initially everything run fine as intended and then vapourise Driving me mad as I did the exercise times now Also any reboot makes the initially nicely working folder tree AND messages visually disappear Anyone a clue why initially everything works as intended -- and then deconstructs and disappears Driving me bonkers - as I need this structure it is there and then after - uses vanishes Looking forward to your suggestions - Sam The Netherlands

A:WLM Database clone on new machine initially works fine - then vanishes

Hi Sam, welcome to Seven Forums.
It could be down to how your mail accounts are set-up.
I sign-in to WLM 2012 on both my pc's with the same Microsoft account but only use my Gmail account. If I read a message on my Desktop it will not be available on my Laptop as Gmail archives messages when accessed by POP.
Do you use POP or IMAP ???
Relevancy 52.89%

When I start MS Works 9, and go to File Open, it goes to My documents. I would like it to go to C:, Program Files(x86), Microsoft Works, Documents. That is where I want to put Word Processors And Spreadsheets. If I cannot open Documents Folder automatically, I at least want Microsoft Works Folder to open automatically. There must be a way to do this.
Relevancy 52.89%

On the new Dell PC (XP software) I am planning on buying, it comes loaded with Microsoft Works 8.

My existing PC is running on Win 98 2nd Ed with Microsoft Works 2000.

Question: Is Works 8 capable of reading files that were created on Works 2000?


Relevancy 52.46%

Hi I have a datbase in microsoft works that i m having a hard time trying to get out the answers to the questions i ask it because i m unsure how to ask My database consists of cards from texas holdem games that i have played it goes like this there are five columns containing flop flop flop turn and river Each title has a card value in it with either a letter or number representing the value of the card and also a letter representing which suit the card is S for spade d for diamond etc So the database is in rows of five something like this flop flop flop turn river Ad Qd Ah s Kc Nothing complex What I want to ask it is how many time that out microsoft database of of the first columns microsoft database are the same suit either specifically or independently I guess i would need to use a formula for this but am usure how to do it Also I want to know the standard deviation between each of the two suited flops happening Thanks nbsp
Relevancy 52.46%

On my desktop (windows xp) I have Microsoft Works Suite 2005. Recently Windows update gave me an update for Microsoft Works Suite 2003. My computer accepted it ok........but, my laptop (windows vista) rejected the update? Is there an update for the 2005 version or do they just bunch them together?
Relevancy 52.03%

I recently purchased an ASUS Windows bit computer I transferred my Microsoft Works Version word processor and spreadsheet files from my old computer onto the new computer I just purchased the Microsoft Office Home and Student Edition bit version from an online vendor and installed the software onto my new computer I have no problems opening my Works spreadsheet files in Excel However when I attempt to open a Works word processor file in Word I get gibberish I Microsoft Cannot Files Word in Works Microsoft Open 2013 did some research online and found out that there is a Microsoft tool called Works - Converter which allows Cannot Open Microsoft Works Files in Microsoft Word 2013 one to open Works files in Word I downloaded the Works - Converter tool from the Microsoft Support website and installed it on my PC However when I subsequently attempted to open a Works word processor file in Word a dialog box appeared with the error message Word cannot start the converter Wks Pxy cnv and the file Cannot Open Microsoft Works Files in Microsoft Word 2013 did not open properly i e I got gibberish I did a little more research online and found out that uninstalling the Works - Converter then downloading and installing the Microsoft Visual C Redistributable Package and finally reinstalling the Works - Converter may correct this problem I followed these steps but unfortunately when I attempt to open a Works word processor file in Word I get the same error message and the file does not open properly If someone can give me advice on a successful way to open Works spreadsheet files in Word I would greatly appreciate it

A:Cannot Open Microsoft Works Files in Microsoft Word 2013
Reboot after any changes you make.
Relevancy 52.03%

I need help uninstalling an add-in to Microsoft Works Suite 2006. I downloaded a program that helped me remove the actual program, Microsoft Works, but the add-in is still stuck and I can not for the life of me get this add-in to unisnstall.. This hole thing has been causing me problems for sometime now, it keeps making my WIndows Installer pop up flashing on the screen about fifty percent of the time I'm on my laptop. I have windows 7 if you need that information, I realize now the program has compatible issues..I finally got the program gone someone please help!! It is call Microsoft Works Suite Add-In for Microsoft Word.

A:Help Uninstalling Microsoft Works Suite (2006) Add-In for Microsoft Word
Relevancy 52.03%

hi everyone
i have question may someone can help me please
if i want make id card for some employer by Microsoft Access is this program helpful for this
cand i make design for id and put it Microsoft Access and put information in it and like this

i think may question is not verey clear but any way you can tray to understand
at the end could i make database by Microsoft Access


A:about Microsoft Access for database

no one can help
Relevancy 52.03%

Hi I Microsoft database question have a datbase in microsoft works that i m having a hard time trying to get out the answers to the questions i ask it because i m unsure how to ask My database consists of cards from texas holdem games that i have Microsoft database question played it goes like this there are five columns containing flop flop flop turn and river Each Microsoft database question title has a card value in it with either a letter or number representing the value of the card and also a letter representing which suit the card is S for spade d for diamond etc So the database is in rows of five something like this flop flop flop turn river Ad Qd Ah s Kc Nothing complex What I want to ask it is how many times that out of of the first columns are the same suit either specifically or independently I guess i would need to use a formula for this but am usure how to do it Also I want to know the standard deviation between each of the two suited flops happening What I m basically asking is how do you filter each record for items that match It seems simple in theory but I cannot figure out how to do it Thanks nbsp

Relevancy 52.03%

-------------------------------------------------------------------------------- Hi I have a question database microsoft datbase in microsoft works that i m having a hard time trying to get out the answers to the questions i ask it because i m microsoft database question unsure how to ask My database consists of cards from texas holdem games that i have played it goes like this there are five columns containing flop flop flop turn and river Each title has a card value in it with either a letter or number representing the value of the card and also a letter representing which suit the card is S for spade d for diamond etc So the database is in rows of five something like this flop flop flop turn river Ad Qd Ah s Kc Nothing complex What I want to ask it is how many microsoft database question time that out of of the first columns are the same suit either specifically or independently I guess i would need to use a formula for this but am usure how to do it Also I want to know the standard deviation between each of the two suited flops happening Thanks nbsp

A:microsoft database question

Are you sure it's a database? You'd probably be better off using a spreadsheet, then you could use a formula such as


, which returns "1" if 2 of 3 match or "0" if 0 of 3 match. Ugly I know, but it's all I can think of for now.

Relevancy 51.6%

Microsoft Office 2010 is installed on my PC (Dell Studio XPS8100, Windows 7). Another member of the household has asked whether she can install Microsoft Works 9.0 on my PC, now that her PC is on its last legs. (She greatly prefers Works over Office, for its simplicity and because of her long-term familiarity with Works.) If Works 9.0 is installed onto my PC, would this cause problems for Office 2010, Works 9.0, and/or my PC? If so, are there workarounds? Thanks.

A:Microsoft Works 9.0 and Microsoft Office 2010 compatibility

The official "word" from Microsoft (pun intended) is that Office & Works can co-exist on the same PC.

Provided you do not intend to share documents between Office & Works (ie both suites will be used separately), there are no "workarounds" or special procedures you need to remember when using them.
Relevancy 51.17%

I'm having problems printing in MS Works. When I choose for the document to print to a printer on my home network, it just prints to the computer I'm on's default printer instead and then manipulates my printers and makes the network printer I told it to print on in the first place the default printer. The problem only occurs with Microsoft Works on my WinXP machine. The network printer is on a Win98se machine. Thanks.
Relevancy 51.17%

Dear all

I have setup a number of databases in Microsoft Access 97 and have them setup as various DSNs on an NT 4 server with IIS 4. (SP6)

Web pages connecting to them all work great.

However, I now use Access XP and would rather not have to keep converting databases to and from Access 97 format.

So, what I'm asking is how can I get the Access XP/2002 database driver onto the server?

I have visted and downloaded (and installed) MDAC 2.7 RTM but this hasn't added the later driver to the ODBC settings within control panel. I've also tried downloading and installing Jet 4 but without any success.

Would installing OXP on the server help? I'd have to remove it afterwards because I only have the one licence.

Please help me out if you can - it would save me tonnes of time.

Many thanks


Relevancy 51.17%


I have an MS Access Database. However two people will have to work on it from different places in a City. Is it possible to make the database available through the internet or something similar maybe? Any ideas would be great cause I cant get my head around it.

Thanks guys.

Relevancy 51.17%

I have experience with MS Exchange Server 2013 for two years. But today I have seen - Corrupted header information, when I opened program. How did it happen? What to do?
Relevancy 51.17%

Hi to all Little background first I operate and look after a D cad package for a company in Philippines there are many changes being done monthly weekly and daily microsoft database scratch access from to the data we use for production Price microsoft access database from scratch changes to materials changes to construction methods of the cabinets we build changes to the hardware used in the construction etc To date I have been using a spreadsheet with column headings Item code ----Date reported ------reported by ---------- Nature of report -------------- dated completed ---------------completed by -----completed by comments Now as this list grows its getting more and more difficult to track what changes were done and when as some items have had major changes or times I used to use a purpose built DB for our customers when I was in sales back in Australia but no longer have a copy of this on my PC So what I figured was to make one myself The brief is this Fire up the program and a dialog input box appears with the above headings and input box s next to the headings The user clicks NEW microsoft access database from scratch i guess and inputs the info date can be automaticly generated The program I use is based to a large degree on ACCESS DB s and has info available from those tables if thats possible for the ITEM CODE input but also need to be manually input microsoft access database from scratch also as the cabinet assemblies themselves are not stored in a DB materials door styles construction methods and the like are however Once the info is saved its stored for later recall as an example the item code -xxx-c- relates to a cabinet say they want the construction changed from dowel joints to a cam fitting this would be entered into the NATURE OF REPORT field In weeks time the boss goes down and sees the change of construction and asks the question WHO WHAT WHY AND WHEN I need to be able to go to the report screen enter the item code and print out or view everything and all the changes that have been done on that item shows the date reported what was the nature of the report and the date completed reported by who and completed by who and completed by comments There you go Am I aiming too high for my first attempt at an access DB is there something thats a template that I can just modify to suit my needs Regards Steve nbsp

A:microsoft access database from scratch

Beard, welcome to the Forum.
This sounds like a nice little beginner database which could probably be expanded in the future.
If you already have an Excel workbook with this data I would start by Importing it.
I would then create a "cabinet" table with an Autonumber ID field and the Item Code as an Indexed field with "No Duplicates" set.
Then create an Append query that appends all the Item Codes from the imported table.
That will give you the start of a table of Item codes than can be selected using a Combo rather than having the user type in the data.
You then replace the Item codes in the Imported table with the ID number from the new Item Codes table.
Relevancy 51.17%

Hi - and thanks in advance for your help.
When I ask to play the song "When" (Artist - the Kalin Twins) in Media Player,
credit for writing the song is given to Clint Ballard, Jr. Clint managed the Twins at the time that "When" hit the charts. He didn't write the song.

The correct writers are Jack Reardon and Paul Evans.
How do I correct the error in the database?
Relevancy 51.17%

I'm not too hot at creating a database in Access, so I was wondering if there was anyone out their prepared to help me construct one.

This database is designed to search for property from various locations and from various price ranges, you can also pick the type of property, the amount of bedrooms and have the result in descending or ascending order.

For location just use: Location 1, Location 2, Location 3, and Any
Price Ranges use: 30,000, 50,000, 70,000, 90,000, and 110,000
Type of property please use: houses, flats, and bungalows
Bedrooms use: 1, 2, 3, 4 or 5+

Fill in any data you wish, I think this needs to have a query setup?

Thanks for your help

Relevancy 51.17%

Hi I am currently working on my Database assignment due in days trying to finish it up I currently have finished making all tables set everything up properly in field propeties and such Now I m facing to the main part of this assignment creating the forms I am required to make a database for Rick Smith of course a fake company so the user can add new customers in new sales and new products in And what I m stuck at the moment is Screenshot of relationship diagram with all the details inside How many queries do I need to make If so what do they need to have Both each In forms I m making Sale form with Sale Line subform Products form Customer form and a Switchboard I can do this myself Do I only need sub-forms for Sale Should I put sub-forms Access: Questions Database Microsoft for others S Should I do the Price of total per items Subtotal GST and Total of all in Query or on the actual form The preview of Sale form is How do I seperate the Subtotals GST and Total from the subform part Are they still in sub-form If so am I meant to make them in the forms rather than making them in Queries I made forms so far just like the ones I mentioned before Everything is working except for Sale Sale Sub-Form When I open a Sale form it asks you to put the Sales Number I m looking for I do not want to do that And let s say I just type and get in there are a lot of stuff which are not required in there Got person s name he bought items but Microsoft Access: Database Questions displays every single items of them I might need to rar and host the data as well to explain this Here s the requirement in pdf http www sendspace com file ewrm I did all field requirements and everything I just need to make forms and possibly queries Regards Maverick The True P S If any of you have a spare time willing to help me out over MSN please let me know I would appriciate Microsoft Access: Database Questions that nbsp
Relevancy 51.17%

Good morning everyone,

My database at work has hit a snag. Whenever I open it I get this error (see attach.) Once I click on yes, it still does not open. It just shows the loading circle (Vista) constantly...

A colleague and myself are the only ones who use this database - it holds 17,000+ files that we have to track. Hers works fine, albeit slowly.

Any help out there with this one? Always appreciated.

Relevancy 51.17%

Hello I have been using Microsoft Works database Works 4.5 Microsoft vs 2000 Works function for many years I am a secretary at a sportsmens club and I have the membership developed in a database that contains name address zipcode ss drivers licence etc From this databsae I create labels to be used to mail out our club newsletters We currently have over members that we store pertinent information on Using the label program in Microsoft works in previous Microsoft Works 2000 vs Works 4.5 versions such as or has been a breeze and always worked wonderfully We upgraded our computer system and now have the microsoft works version We were able to load our databse in this version and have been using it quite regularly We are continually adding to this database daily My problem is I have yet to figure out how to develop the labels for the mailing addresses You would think this would be an easy process but when I try to do this I get an error message saying I have characters such as periods etc and cannot produce these labels That would be quite a bit of extra work to remove any of those special characters and before I would do that I would want to make sure if that is really what the problem is Why would Microsoft Works 2000 vs Works 4.5 it be a problem in works and not works Right now I have the program loaded on a laptop with works just to devleop the labels I really do not want to convert to using just because of the dates that I use in the databse and with the newer version it recognizes dates in the year and greater Why has this become such a chore and that I am unable to do this I cannot believe that I would need to go through my database and take out any periods etc I do not have to do that for - why would I have to do that for the version I have been playing with this for months and still have not figured out the way to do this so if there is anyone that can help me with this dilemma I would appreciate it Thank-you nbsp
Relevancy 50.74%

My 90 year old father just bought an E-machine and has an HP printer. when he is in Works, he can print posters, other templates and note pad documents but the printer sends blank sheets through for any spread sheet or word documents. Any suggestions?

A:printing works documents

Download the newest printer drivers from HP.
Relevancy 50.74%

When I try to print a spread sheet from the menu bar, it crashes the document and won't send it to the printer. If I click on the spread sheet print icon it prints fine but you have no control over which sheets print. I have no problem printing in word or on the web. This problem has occurred before and I reinstalled works to fix it. This time the reinstall did not work. MY OS is Windows XP, SP2.
Relevancy 50.74%

Using MS WOrks 8.0V with MS Windows XP. Computer connected to a HP Deskjet printer. Windows test page and Works Word Processing print out fine. HP Deskjet selected for Default printer in Control Panel. When attempting to print Works Spreadsheet (new or saved) comes back with an error that Windows Default Printer not selected. Any advice???

A:MS Works Spreadsheet printing using XP

File - Print -(in Works)

Does that say the printer is selected? What happens if you select the printer?
Relevancy 50.74%

Not sure if this is the right forum but it seems close enough I got VectorWorks recently to use for my scenic designs and Lighting plots Previously I was only doing student projects so I could export my designs as images and then use Powerpoint and an LC projector to present them Vector Printing Works I am now working on the design for a real show one that we are actually producing and I have run into a dilemma I have no idea how to print it All I own is an quot x quot laser printer and the document is almost feet long I went to Kinkos but the guy said that they can only print Adobe Files I could export as an image and past it in illustrator but then it becomes a photo and is no longer to scale Another company who supposedly specializes in blueprinting will only take computer files in PDF Acrobat format I don t have Acrobat pro and I think that that would alter the scale also wouldn t it It appears that VectorWorks expects me to be able to afford a printer Are there places that will print a VectorWorks file in it s native format MCD Thanks Nick nbsp

Relevancy 50.74%

I cannot print from anything in works 7.0 I have a HP 1300 printer. I can print anything on the internet. I have tried printing from notepad aswell and this does not work, I just get blank pages. Please can you help
Relevancy 50.74%

I have been having a problem printing my Works Calendar. PLEASE HELP ME SOMEONE!!! thank you!! Carol.Mod Edit: Moved topic to more appropriate forum and closed tags. ~ Animal

A:Printing Works Calendar

Carol,I do not know what version of MS Works you have, but I googled your problem just as you stated it. I was able to come up with a multiple solutions listing that may work for you. Take a look at this link. Hope this helps. If not please post back with as much information about what happens when you try to print your calender.Be (Be 30 days hath April....)SafeDa Bleepin AniMod, Animal
Relevancy 50.74%

Win. Xp, when print a spreadsheet in Works 6.0 get out of memory. Need to answer Ok then it prints. (have updated driver, etc.) please help. thanks

Relevancy 50.74%

I have never been able to print a calendar from MS Works ver.6. I get a window showing papers dropping into a yellow folder and a message "please wait while the calendar prepares to print". It never reaches the printer. I have reloaded the software more than once to no avail. Every other printing task works fine. It is just the calendar. I have to take a screen shot, resize it and print it. This takes too much time. Can you help?

A:MS Works calendar printing

I have tried the WKpr60 fix, but it didn't work. I found if you use the "export" command under the "file" menu and save it in the html format, it will print. I now have upgraded to works 7.0 and it works fine.
Relevancy 50.74%

If I change my printer settings (such as color vs. B/W - Draft vs. Normal) when I go to print a spreadsheet using Works 6.0, it will still only print using the printer settings in place when the computer first booted up. When I look at print preview, it shows the changes, but will not print the way it shows. No other program does that.
I keep the printer defaults on Draft & B/W. When I want to print anything in color or higher resolution, I select Properties when the print window comes up and make the changes. The print copy always comes out with the changes - except with Works. When I want to change the print settings in Works, I have to go into my printer set up, change the default settings and reboot. Then and only then can I print with the new settings.
Can anyone tell me what's going on?
Relevancy 50.74%


I want to send group mail to email-addresses that are in my access database, but I can't find a way how to export the address' in a form that I don't have to manually copy and paste each address.... like this--> [email protected], [email protected], [email protected].... please help, I can't find the solution

A:Group mail from microsoft access database?

What type of group mail are you doing?
Relevancy 50.74%

when I entered my roll number in the following site:-
Then after pressing "submit",it showed following error:-
plz help

I want to see my marks

A:Microsoft JET Database Engine error '80004005'

Is it computer problem or site problem ??
Relevancy 50.74%

When opening Microsoft Access, the norm is to have a samller window inside the large window pop up that says the type of data base. Then you can click on the icon inside to open up the database. Well, someone in my office closed out the smaller window and I can't figure out how to get it back. I tried looking in the recent history to no avail.

I know this is a stupid question, but I can't figure it out and the database holds my list of clients which I desperately need. Any help would be appreciated.

Relevancy 50.74%

I am in the process of developing an Access 2003 application, and almost done. While I was fixing some errors with controls on one of the reports, seems like the database corrupted. Now, I keep getting "microsoft office access has detected corruption in this file....etc". It instructs me to Compact & Repair, but when I get the same error message when I try that. If I open a blank database & try to import objects from the corrupted database, I cannot access/view the objects of the corrupted file from the blank database. Unfortunately, I dont have a backup of the file, I can try to restore to an earlier storage point (using System Restore), but will lose considerable work. Any ideas?

A:How to fix corruption error in Microsoft Access database

It is sometimes a good idea to decompile your database and then compacting and repairing. I had a similar issue just the other week, my database kept of throwing an error "File not found" however i have no code within my DB that searching or references ANY file. I just decompiled the code and it all worked again..Create a shortcut and enter the below into the taget, you can also copy paste a shortcut and edit the target to the below. You will need the path to where MS ACCESS is installed and the path to where you database is stored.Then run the shortcut and it should decompile your database. Once you've sucessfully done that, compact and repair it again."C:\Program Files\Microsoft Office\Office14\MSACCESS.EXE" "c:\YourDatabaseName.mdb" /decompilemessage edited by AlwaysWillingToLearn
Relevancy 50.74%

Does anyone know the location of the Micrososft Security Essentials database as I need to set up an event trap to prevent myself from inadvertently disconnecting from the internet whilst any update is in progesss?

A:Microsoft Security Essentials database location

Copy and paste this filepath into the Run field, but I don't hold out any promises it's the correct answer.

C:\Documents and Settings\All Users\Application Data\Microsoft\Microsoft Antimalware
Relevancy 50.74%

Hi everyone,

While I am not a tremendously experienced Microsoft Access user, I did manage to set a database password for a file of mine.

I thought this had made it secure however now we have discovered that when the file is emailed to another computer it can be opened without having to put in the password.

I thought that putting a password on the database would mean that the password would need to be entered no matter where the file was opened. Is there any way I can secure my file across any computer that it could possibly be opened up on.

We are running Office XP on Windows XP.


Relevancy 50.74%

I am thinking about creating a password database in MS Access. Does anyone know where to find a template for type of database. I would want to encrypt it but I have found a lot of software to get the password of a Microsoft Access Database, Is this software good enough to protect all of my passwords? I had bought one, but it seems like Microsoft Access could do a much better job than the one I bought.

A:Password Management Database Microsoft Access

Joe, are you talking about a Database that contains Passwords?
Which I assume that you want to protect?
Relevancy 50.74%

afternoon techies I ve been having a nuisance of a time with Access I need to VBA not Microsoft my in objects does display database the Solved: access VBA for one of the objects in my database a form to be exact and for whatever reason VBA does not display any of the objects in my database when I open the it Funnily enough it doesn t happen with other databases it only happens with the one I am currently using As far I can recall I never changed any settings in the database for this to occur My database is simple as it only contains a table and forms Any idea as to what could be going on here It would be fantastic if I can get an immediate response because I need Solved: Microsoft VBA does not display the objects in my database to get this project finished by the end of this week and I really need to gain access to VBA Thanks for your help guys May I further add this problem was not around yesterday only upon starting Access today did it occur I ve tried to use VBA with databases but only one was successful nbsp

Relevancy 50.74%

just deleted micorosoft works and installed microsoft word(office) BUT now i cant open my old works documents? I have read alot about this but just wanted to check here before i did anything. Im sure i know what to do but just wanted to see what other methods are suggested? thanks!

A:microsoft works document to microsoft word?

What version are you using?

e.g. for 2003:

for 2010:
Relevancy 50.31%

I have an Epson WF-7510. It all of a sudden isn't printing tonight. Last I printed was 1-2 days ago with no problems at all. Nothing has changed with my computer since then. When I go to print it sits in the queue then after a while I get the printer error in the queue list. The printer printed its own test page (not through my computer but through my printer) and everything was fine. It is WiFi connected and checked out. The scanner works through Photoshop so I know the printer and computer are communicating. I have tried the basics - rebooting, resetting WiFi on printer, printing online vs Word document, troubleshooting through Windows, and nothing. Please help!!!

A:Solved: Printer not printing, but everything else works??

When you look inside Devices and Printers, is the printer listed as 'on line'? Is it listed as the default printer? Can you print the test page from the printer properties? Did you check the Print Spooler service to make sure that it is running? Did you shut down and unplug the printer?
The Cleaver
Relevancy 50.31%

I installed OfficeJet 6830 software with my replacement refurbished printer that HP sent.  Can print but cannot scan.  HP troubleshoot doesn't help
Relevancy 50.31%

We just bought a new machine and transferred all of our programs to it The original machine was Windows and now we have Windows XP I Works Printing Error Business installed the Business Works software and restored our backup to the new machine I went to test a report selected my laser jet printer selected the account hit ok and received Business Works Printing Error the error MZLPP DLL Unhandled exception occurred I have printers installed on the machine - local network I set the local printer as the default and I was able to print the report to that printer I kept Business Works Printing Error the local printer as the default and I was able to print the report to the Epson dot matrix network printer LQ- I tried printing to the hp Business Works Printing Error laserjet tn and got this error MZLPP DLL Unhandled Exception occurred I clicked quot Ok quot and got the following error Application Error Exception EPrinter in module MZLPP DLL at A E Printer selected is not valid When I clicked quot Ok quot Business Works would not let me close out of the program saying I had one option still open which I didn t I had to CTRL ALT DEL to get out of Business Works nbsp

Relevancy 50.31%

Hi! I hope someone could help me out.

I am using this Microsoft Access that has a database that is as old as 20-30years on an old desktop. It has been passed down to me for generations that used to work on this Access. Used it as a contact list, and a Report Generator Software that I use to generate a report that I could print via Access. The database is working fine, but is super super super slow! (The computer CPU even have a floppy disk reader, and it takes 10 minutes for the desktop to start. That's how old the computer is!).

I bought a brand new desktop an updated one, and I wanted to transfer all data from the Microsoft Access and Report Generator Software to my new desktop. How can I do this without missing a single data?

Thank you for those people that would try and help me out.