Windows Support Forum

Key Board Issues

Q: Key Board Issues

Let me start off by saying that I do not condone the usage of pirated software. What I meant earlier was that I wasn`t sure if the OS was pirated or not. I was really hoping it wasn`t pirated. Would it be pirated if it has the OEM number displayed in the proper place, or would it be genuine? In any case, I do have a legal copy of Windows XP that I could put on it, the only question I have is will the product key on the computer work with the legel XP to get a clean install?

Relevancy 100%
Preferred Solution: Key Board Issues

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Key Board Issues

Quote:





Originally Posted by bones6987


Let me start off by saying that I do not condone the usage of pirated software. What I meant earlier was that I wasn`t sure if the OS was pirated or not. I was really hoping it wasn`t pirated. Would it be pirated if it has the OEM number displayed in the proper place, or would it be genuine? In any case, I do have a legal copy of Windows XP that I could put on it, the only question I have is will the product key on the computer work with the legel XP to get a clean install?




Hi bones,

If there is an oem key on the computer case, then this key will work if you use an oem install disk on the same machine. Just make sure the disk you are using is the right one. Usually the oem xp CDs were reflective/holographic and any other kind could be a retail/VL/AP version.

You may still need to call Microsoft to get the activation sorted due to the oem key already being used (on the same machine).

L

http://www.techsupportforum.com/forums/f217/key-board-issues-609312.html
Relevancy 49.45%

hi all i accientally knocked my pg up and pg dn buttons out i usually can pop them back in but im have trouble please help (diagrams are better)

http://h30434.www3.hp.com/t5/Notebook-Operating-System-and-Recovery/key-board-issues/td-p/5791749
Relevancy 49.02%

The usb ports all failled on my son's pc. So I bought and installed a pci card with usb ports. Now when I start the machine, it goes to the "windows xp" page and then quits. If I take out the board battery and put in a new battery it just does the same exact thing!

A:board battery issues.

The article the link below will take you to is very comprehensive and should have the information you need to troubleshoot this problem.
 
Microsoft Windows XP - Resolving USB controller installation issues
 
What board battery are you referring to?  The CMOS battery?

http://www.bleepingcomputer.com/forums/t/486657/board-battery-issues/
Relevancy 49.02%

Quote Originally Posted by justpassingby Try safe mode same menu as last known good configuration Reset the CMOS refer to the motherboard manual search for Clear CMOS Jumper http www evga com support manuals -CK-NF key issues and mouse board pdf Did you uninstall the video drivers related to the Nvidia GTX key board and mouse issues video card or the nforce drivers related to the nforce i chipset of the motherboard Is this XP Home Pro MCE What service pack If you have the retail install CD then you can do a repair installation and keep all your files and documents intact You'll have to use a CD with the same service pack as the one installed on the computer Use these guides with another computer to create an SP or SP CD if needed http www winsupersite com showcase slipstream asp http www lancelhoff com to-windows-xp Boot on the XP CD press enter to setup windows now accept the licence select your current windows installation then press 'R' to repair the selected installation Make sure the option you get is quot repair quot else exit and report here Edit If you had installed internet explorer then you'll have to uninstall it before starting the repair process This can be done from the recovery console Follow these instructions from Microsoft How to perform a repair installation of Windows XP if Internet Explorer is installed well im just confsed because when i install the motherboard software they had this uninstal some old drive to give it with new drive and need to reset then after that my mouse and key board wont work T T so is there a way to reformat my hardrives without passing that windows menu because when i get to windows mode the keyboard and mouse wont work but my key board work on the BIOS so im just confused is it the mother board drivers or the windows itself well i got two windows XP now i accidentally redownloaded it and i got two of them so the other one the first one i installed the mouse and keyboard was not working then the other one worked fine so how can i delete the other one the Os that dont work and TY

http://www.techsupportforum.com/forums/f10/key-board-and-mouse-issues-293618.html
Relevancy 49.02%

Hi I'm currently using bit Vista Home Premium and an Audigy ZS Platinum sound card The OS is not recognizing my rear speakers at all I've tried letting Vista install the drivers itself and I've also used beta and current release drivers from Creative's site sound is enabled in the sound properties tab in Vista Creative board issues w/ 5.1 along with Creative Audio Console I've toyed around with different settings and these are the results If audio console is set to and Vista all channels play correctly but rear channels play through 5.1 issues w/ Creative board Front Left and right speakers If both are set to sound is distorted center and sub don't play and there is no sound from rear Sound plays through rear speakers if I use Dolby Pro Logic II settings on my speakers Logitech Z- That said the OS still does not play through the rear channels This only works on movies and music but not games or other software At one point in the past my rear-right channel would work I don't know what I did but no nothing works Halp

A:5.1 issues w/ Creative board

Disregard this thread, I fixed it.

http://www.vistax64.com/sound-audio/200101-5-1-issues-w-creative-board.html
Relevancy 49.02%

I've had my laptop for only about a month now and everything has been working fine. However the past few days, while im playing a game, the keyboard will stop working and then the enitre system will freeze. The only way to fix this is by shuting my system down manually, which i do not like doing. Why did this problem begin to occur and what can i do to fix it?

https://forums.lenovo.com/t5/Lenovo-P-Y-and-Z-series/Y-700-15ISK-Key-Board-issues/td-p/3423021
Relevancy 48.16%

I have a old PC , PIII 600 which looks like the on board graphics card has broken. I am getting cable not connected from the monitor.

The monitor is fine, I have tested it on other PC's.

I have installed a PCI graphics card, but do not know how to get the PC to recognise it without disabling the onbaord on in the bios. I cannot see the bios as the monitor will not pick up the onboard one?

Please advise?
 

A:On board ghraphics card issues

Onboard Video

Hi Potterman;

Well, you?re defiantly on the right track. All bios programs are somewhat different; so, I really can?t advise you if the disabling of the onboard video is possible; especially with an older PC. I would think it should be possible!

And yes, see if you can disable the video first, then reboot. If you gotten that far and still don?t see video, try installing the drivers for the PCI card the next time around.

It wouldn?t surprise me if it?s not possible. The malfunction of the onboard video in a mother board is a pretty big break.

Hope that helps!

Eric Korson
Korson.us
The Internet Web Firm
 

http://www.techspot.com/community/topics/on-board-ghraphics-card-issues.38295/
Relevancy 48.16%

My on board video adapter is non functional. I am trying to replace it with a PCI video adapter but the issue is that I cannot see the screen in order to gain access to the BIOS and disable the on board video adapter. Anyone have any other ideas other than replacing the motherboard?

I have confirmed that the video adapter is broken at the motherboard.

It is a Emachine desktop.

Thanks!

Antil0ck
 

A:On board Video card issues

so you can't see any display?
 

http://www.techspot.com/community/topics/on-board-video-card-issues.128718/
Relevancy 48.16%

hi Im new around here so sorry if i posted in the wrong area But here s the story i bought a laptop about months ago Its been working just fine Then weeks ago all of a Having laptop system issues...maybe board? sudden i turn it on and i get to the login screen and i start seeing lines across it and then it flickers Im unable to do anything i cant reboot cant move the mouse cant even put the computer in hybernation mode I have to wait for the battery to die for it to shut off I tried a few other times and i got the same results So after calling HP a million times i sent it in and Having laptop issues...maybe system board? today i got it back on the invoice it says repaired but then when i turn it on its still doing the same stuff im pretty ticked off at em so im about to call em up and chew em out does anyone know what could be causing this If its something i can do myself ill do that instead of sending it back again and going through the pain in the Thanks nbsp

A:Having laptop issues...maybe system board?

Try a test first.

Do you have a desktop? If so, plug your desktop monitor into your laptop and then turn it on. If it works fine then it is your laptop monitor. Some people that I went to college with had the same problem as you have, only got lines showing on the monitor (but their's happened after their warranty ran out). The IT department at our school told them it was the monitor. Usually some could get it working if they pressed the sides of the laptop monitor. Just an idea, but I would definitely try the test first and see what you get. If it works send it back and tell them you want a new laptop or a refund. At this point I wouldn't even want them to replace the monitor.

Hope this helps.

hu_nr
 

http://www.techspot.com/community/topics/having-laptop-issues-maybe-system-board.17950/
Relevancy 48.16%

Here's the deal : My friends motherboard fried, like, no bios flash, no mouse/keyboard lights, nothing (so I assumed is the mobo), so I got a new Mobo and dropped it in, connected everything, then tried to boot up and the mouse now lights up, but stil no bios flash, nor keyboard lights - helpppp?

-Sean
 

A:Mother board issues I thinkk?

Hello,

This sounds quite odd. Have you tried
* a new power supply?
* unplugging anything put the core minimum?
* It could be the graphics card doing odd things to the motherboard (assuming no on-board video).
* The ram or cpu?

I would...
1) Try another power supply if you have another one
2) Test the ram, as this easy to do.
3) Unplug every thing slowly (as to find the error) until the problem is resolved or you are at the bare minimum (motherboard and power supply, as the motherboard should beep to say there is no cpu or ram, if it is working).
4) Test vital system components in different machines.
 

https://forums.techguy.org/threads/mother-board-issues-i-thinkk.662251/
Relevancy 48.16%

Hi everyone I computer issues and Key my on board Mouse have had a my computer for around - years now and it has worked great I'm an avid computer gamer and love to Mouse and Key board issues on my computer play games with my friends CSGO Gmod etc Recently I have had this issue where at random times my keyboard and mouse will just stop working It happens at the same exact time that the keyboard and mouse shut off The light form my mouse is still on yet It does not Mouse and Key board issues on my computer seem to be putting any input into the computer As a gamer this comes to be a problem because I have been screamed at multiple times from my friends because I have to shut down my computer and turn it back on again JUST TO GET THEM TO WORK AGAIN Afterwards I could be playing Mouse and Key board issues on my computer again and low and behold my keyboard and mouse shut off again This has really become a problem because one time i was writing an essay and had not saved it yet GUESS WHAT Key board and mouse gone I couldn't save my work and I had to re write pages of hard thought out text Thanks windows I appreciate it

https://social.technet.microsoft.com/Forums/en-US/522fe2b0-a2b7-4e22-8d20-ba771ec0073a/mouse-and-key-board-issues-on-my-computer?forum=w8itprohardware
Relevancy 47.73%

I just built myself a system with an ASUS P P S-X mainboard and for storage I m using a Western Digital WD JD SATA hard drive in addition to a Maxtor H PATA drive Over the past few weeks there have been about four instances where the system has completely frozen and immediately preceding that freeze was a quot click quot like the hard disk powered down In the Event Viewer I have also seen multiple instances of Error controller error on my WD drive and a couple instances with P4P800S-X board SATA WD and Issues drives of Warning error while in a paging operation for the same drive I ve run diagnostics on both my hard drives and regularly monitor SMART attributes and drive temperature Everything s in perfect shape in every way -- EXCEPT for those errors reported by Windows and the mysterious crashes Now I ve searched forums all across the Net and I have found a couple other people who have had this same problem with the combination of a WD SATA hard disk and the ASUS P P S-X Issues with P4P800S-X board and WD SATA drives mainboard I haven t found any updated drivers for either piece of hardware and ASUS hasn t released a BIOS update My question is this -- does anyone else have the combination of a P P S-X and a WD SATA drive and if so have you encountered this problem The crashes happen rather infrequently but they come at rather awkward times watching a DVD accessing the Internet running Windows Media Player or Winamp etc Also the quot click quot concerns me Usually that s a very bad sound and a sign of upcoming hardware failure However as I search I m finding lots of people are having similar issues and it almost always isn t as easy as quot your drive is failing buy a new one quot FYI I am replacing the WD drive with a PATA Maxtor DiamondMax PY LO hard disk since it seems like the simplest way to solve this problem However I still would like to start a conversation about the whole deal since I m sure plenty of people like myself would like to get to the bottom of what s causing the whole deal so it can be avoided in the future nbsp

A:Issues with P4P800S-X board and WD SATA drives

The same problem...

Yes, I had the same problem. During game play, sometimes even in the menu, and with the 3D text screen saver running my system would freeze with the hdd light on preceded by a "twang" from the hard drive, requiring a reboot. The motherboard was a P4P800S-X and a WD800JD SATA hard drive. The P4P800S-X seems to have a problem controlling a SATA hard drive. I chased this problem for days thinking it was a video problem. Then I removed the SATA hdd and installed an IDE hdd and it worked fine. I have since returned that motherboard and upgraded to a P4P800E-Deluxe + another WD800JD and set it up for RAID-0. With this new set-up I haven't had a problem. I would suggest that you consider upgrading your motherboard (the probable culprit) or doing as you have stated and avoid a SATA hdd. This really sucks for Asus, they're suppose to be "top of the line". They don't even show P4P800S-X on their products list anymore, they kinda "swept it under the rug".
 

http://www.techspot.com/community/topics/issues-with-p4p800s-x-board-and-wd-sata-drives.18558/
Relevancy 47.73%

Hi Im somewhat new issues board! with a locking and Sound aopen to this forum so i thought i would see how good youguys are Im going to tell you what i have then explane the issues Motherboard Aopen vK T a-LF Sound and locking issues with a aopen board! CPU Amd Hard drive WD YD sata Video card Nvidia geforce fx AGP x Windows OS Windows xp home Valid Memory G samsung stick Ok All the hardwear is new I just bought it all and got it together I had some issues with getting the motherboard to see the sata hard drive but i figured out the hard drive i was using had a g speed and my motherboard supported mb so i had to set the jumper on the hard drive to only mb This worked i was on my way and didnt think much of it So then i go and install my OS windows xp home and get it all setup and it works great So i insert the motherboard driver disk and install the drivers No issues yet Then i install the video card and its drivers No issues As you know the vk t does not have onboard video so no need to mess with bios Now im on my way I go online to download the windows xp updates and thats when it happens Or i should say thats when it all starts All of the sudden the computer locks up and i have to hard shut down I figured it was something silly so i didnt pay it muxh mind I reboot and as soon as the windos comes up it locks up again Now im concerned So i gop into bios and make sure and set the defaults I reboot and it locks again Soon after it start not locking at startup but anytime i try to install updats or install cdrom softwear I installed a game called world of warcraft and couldnt update it so i went into safe mode and downloaded them that way The sound gos out So now i have a whole new bag of issues Now the sound gos out anytime i play a game or try to update or use msn msgr Infact it wont even open msn msgr without locking up So i went ahead and took out the video card to see if that was the issue and replaced it with a mb cheep card and it still locked up Then i replaced the cdrom and tryed that It still locked up So now i have no sound unless i reboot and it locks up all the time Im wondering if anyone knows of any simular issues with this board or if i just got a bad one Or maybe there is a driver update for this board i dont know about I searched everywear anddidnt find one If youguys could help me i would be greatfull I also put in a soundblaster sound card to try and fix the sound It didnt work I still get no sound if i play games or download Thank you -Mike nbsp

Relevancy 47.73%

Referring to article: http://www.techspot.com/vb/all/windows/t-18558-Issues-with-P4P800SX-board-and-WD-SATA-drives.html.

The error you?re getting (click and temporary freeze of the system) is a conflict with your AGP graphics cards; because, it cannot pass the 3D Mark 2001SE.

Go to DriverGuide.com and update the BIOS for the P4P800S-X board. You will download an extractable file to create a boot-up disk. Make sure nothing interrupts that update; because, you can render your mother board useless.

After the update, the board will operate like it should running the SATA drives.

Eric Korson
Korson.us
The Internet Web Firm
 

A:Issues with P4P800S-X board and WD SATA drives

Thanks for the update... looks like they finally got around to fixing that error at the BIOS level. Since my PATA hard disk has been working fine for a while, I had pushed this into the back of my mind...

Anyways, it's nice to know that if I wanted to upgrade to SATA, I actually could.
 

http://www.techspot.com/community/topics/issues-with-p4p800s-x-board-and-wd-sata-drives.64649/
Relevancy 47.73%

OK so I had a similar issue with sound in Windows that has been described multiple times in this forum The sound was crackling and buzzing so I installed Realtek audio drivers as suggested in this forum and it started working albeit temporarily The sound will now work fine for a number of minutes sometimes up to minutes before wigging out and freezing the application that is running sound or sometimes even the whole damn machine So after some investigation and reading I believe I am on the correct tack to solving this problem but have hit a snag I have the ASUS P TE board with onboard audio The driver I downloaded from Realtek by following a link in a forum post Realtek was the Realtek HD audio driver Now I m pretty sure my board is not the HD audio board but rather the standard AC board I have a CD that contains these drivers but when I try to run it in Windows I am greeted with the This CD Sound Board) Issues More (ASUS Integrated is not supported by this OS message Ok so I downloaded the AC driver off the same page I used for the HD driver I m pretty sure this is the right driver as I said above and this was further solidified as I recognize the installation menu However now More Sound Issues (ASUS Integrated Board) I have an error message This driver is not More Sound Issues (ASUS Integrated Board) digitally signed Of course I am given the option to proceed with the installation anyway or to cancel I click proceed anyway and the error message just keeps re-appearing in an endless loop though it cheerfully responds when I click cancel and terminates the installation sigh So two ways this can go Can I fake a digital signature or get a signed driver from Realtek for the AC Figure out how to bypass the digital signature required by Window security I ve already tried a few things with Option with no joy at all if anyone knows I would greatly appreciate it Thanks

http://www.eightforums.com/sound-audio/11027-more-sound-issues-asus-integrated-board.html
Relevancy 47.73%

I ve just been helping my brother set up his computer so it outputs sound to his hifi amp so he can listen to music in the rest of sound/hifi issues on-board Audio: his house but we have run into some issues Configuration is as follows Gigabyte K V M mobo audio-out - gt mm adapter which splits to two mm stereo sockets one end connects to a mm stereo cord for his computer speakers the other connects to a mm to xRCA Audio: on-board sound/hifi issues which plugs into his hifi amplifier See the following image for a clarification What we have noticed is that if there is no audio being played the hifi system has Audio: on-board sound/hifi issues a very strong hum coming from the speakers It is no apparent when a song is playing The same is also for the computer speakers I tested the cables and I Audio: on-board sound/hifi issues couldn t isolate it specifically to either cable The latest audio drivers are installed for the hardware and I don t believe there were any issues with the pc speaker set-up before we connected this other stuff up I m not sure if the cables are duds or if what we have done weakens the signal or something Thanx nbsp

Relevancy 47.3%

Hi y'all

I got a Intel Server Board L440GX with the dual Pentium III processors and i cant get it to recognize the Mylex eXtreme RAID 2000 FW 7.01-00. I have never configured a raid before but i think i got it right(not sure) anyway the bios says that no h.d. or likewise is installed. I ain't got any ideas on what to do please help
 

A:Intel server board L440GX RAID issues

bwta, sound like you better take a look at:
http://download.intel.com/support/motherboards/server/l440gx/AcceleRAID1_0.pdf
 

http://www.techspot.com/community/topics/intel-server-board-l440gx-raid-issues.168173/
Relevancy 43.86%

amd xp (Long get issue?)....before Thread) call new I a fix ideas(power/board for Last board palomino on a ga- vt winxp sp i upgraded video ram in my computer and now i can t even get the old what was replaced stuff to work here s a few things to list install new vid card update drivers settings reboot no picture to monitor unistall reinstall card boot and monitor has picture install another gig of ram boot no picture take new ram out boot no picture take new card out put new card in boot no picture take new card out Last call for fix ideas(power/board issue?)....before I get a new board (Long Thread) put old card in boot no Last call for fix ideas(power/board issue?)....before I get a new board (Long Thread) picture take all memory out try known good stick in all slots boot and no picture put all back in boot no picture turn power on and watch the led fans run on my lb paper weight it s a never ending combination that i ve tried here and i cannot get a picture on this monitor i ve swapped monitors around and all are good i ve put components from this computer into another computer and they all worked something is not letting this thing boot up i get no picture to the screen and no beeps sounds or anything else i turn the computer on and you hear the fans hard drives and burners powering up and everything but there is no picture going to the monitor it sounded like bad memory because i ran into a case of that before but all the components still work when placed into the other computer my last guess is the board has gone sour i was reading other posts and people have mentioned the power supply but where do i check that at it s a codegen w ps came with the case which was also made by gigabyte i m assuming since it is stamped all over the place if i can t find help with that problem then how about some suggestions for a new board since my options have opened up some because i ve been told my pc sticks will work on board that are rated below that they just have to be able to take gb per slot here s the components - amd xp palomino socket a - maxtor gb hd - maxtor gb hd - x dl dvd r rw drive - x x cd r rw drive - floppy drive - mb ddr pci nvidia geforce mx - mb savageIII agp will probably be placed in storage - gb pc mhz ddr sdram - mb pc mhz ddr sdram i m leaning toward an asus board but the abit s are cheaper and i won t be asking a lot out of the computer except reliabilty sorry for the long thread but i can t think of anything else that would be wrong except board or power supply tia for your help - tag nbsp

A:Last call for fix ideas(power/board issue?)....before I get a new board (Long Thread)

https://forums.techguy.org/threads/last-call-for-fix-ideas-power-board-issue-before-i-get-a-new-board-long-thread.423093/
Relevancy 42.57%

Hello All I ve been having this issue while playing on Asus P4P800S-X Sound On-Board Board games lately I just got an Intel Ghz Prescott with Gig of DDR ram and I m now using an ATI Radeon by Sapphire MB DDR I dont have a sound card so I m using the one on-board that comes with On-Board Sound on Asus P4P800S-X Board the Asus P P S-X motherboard SoundMax While im playing a game after a reboot everything is fine for about a minute then the video starts lagging and lagging and getting worse and worse Its like it locks up more and more and the sound cuts alot To the point that its not even close to being fun playing anymore The game On-Board Sound on Asus P4P800S-X Board im playing is Guild Wars which requires alot less than I have I also talk on Skype at the same time and when I m fighting or more guys I cant even hear anything on Skype I have a mbps connection on cable And this is with the game graphics at the lowest Now get this If I disable the audio in the Bios and load up the game with full graphics smooth nice game play I ve tested playing a long time and its perfect with no lag at all Now I m guessing that is pretty conclusive Should I get a Sound Blaster Live or could it still be something else Conflicts Im also running windows xp sp Thanks for taking the time XeroVariX -- lt SYSTEM CONFIGURATION gt -- On-Board Sound on Asus P4P800S-X Board CPU Pentium GHz Mhz FSB MEMORY Gig DDR RAM MOTHERBOARD Asus P P S-X Intel Chipset Mhz FSB CASE Watt Power Supply VIDEO CARD Sapphire ATI Radeon MB DDR AGP HARD DRIVE Quantum Fireball GIG RPM ND HARD DRIVE Western Digital GIG RPM DVD-R DRIVE LG X DVD Burner SOUND CARD SoundMAX Integrated Digital Audio NETWORK CARD On-Board Realtek RTL Family PCI MONITOR Viewsonic quot M B KEYBOARD Key PS MOUSE Logitech MX Optical Mouse USB CONNECTION Mbit Cable OS Windows XP Pro Service Pack nbsp

A:On-Board Sound on Asus P4P800S-X Board

Have you loaded the motherboard makers sound chip drivers, or is it just limping along on the default Windows drivers? Might make a difference.
 

https://forums.techguy.org/threads/on-board-sound-on-asus-p4p800s-x-board.419647/
Relevancy 42.14%

I am running windows Home Premium 64bit. I just did a fresh install and when I ran the WEI the computer rebooted. I can run it with out being in SLI mode, but as soon as I enable and refresh the computer reboots. I am wondering if it is caused by the power supply. I have a rosewill RP650 2 psu. Newegg.com - Rosewill RP650-2 650W ATX12V v2.3 & EPS12V v2.91 SLI Ready CrossFire Ready Active PFC Power Supply

What are your thoughts?? I have the latest drivers and again this is a new OS install.

A:Evga GTX 260 SLI with Evga x58 mother board reboot issues

Hi and welcome to seven forums

How recent is the SLI? Have you just added the 2nd card?

Could you tell us the rest of your system specs or fill them in on your profile.

Do both cards work fine if you just have 1 installed?

Sounds like it could be a power issue if so.

Cheers

Paul.

http://www.sevenforums.com/graphic-cards/187047-evga-gtx-260-sli-evga-x58-mother-board-reboot-issues.html
Relevancy 41.28%

Keep in mind that this is my first venture into the Core-i series systems All my other systems are C D and C Q Hence the issues a user having on "New" board. new ram quot new quot user I recently purchased this motherboard http www asrock com mb Intel Fatal ty Z Professional And got pieces of this memory F - CL D- GBNQ pcs DDR - GB http www newegg com Product Product aspx "New" user having ram issues on a new board. Item N E However the website claims to support this memory instead F - CL D- GBHZ I took a chance knowing this difference Note that I never overclock I always run things at default so I got the fastest default the board will do - MHz The following is the best description I can recall when I installed the memory It powers up fans etc but no display A few seconds later it cuts itself off again for a bit then fires back up Again no display then cuts off again Time lengths I estimate about seconds running cuts off for seconds then continues in that cycle I m running the board with a couple old DDR - Kingston sticks just to have it work It does work but it s not letting me use the new memory I have no other boards that support the new G Skill memory either so that s out Can someone guide me through setting the BIOS to the proper setting so I can get this new memory to work I figure if I can set the BIOS values I can power the unit off when it s in reboot to quickly switch out the memory If it ll actually work with the board Anyone care to take the time to show a non-tweaker how to tweak the board to work with the memory I have Meaning suggested values for this memory - I know how to change BIOS values heh To restate I m using pieces GB sticks part number F - CL D- GBNQ I should note that even though the board is less than weeks old I haven t yet attempted to flash the BIOS Haven t been able to really And the new G Skill memory only came in Wednesday From Newegg nbsp

A:"New" user having ram issues on a new board.

I dont see that PARTICULAR memory module listed either. That could be why you are having problems. If you have already tried with the new memory there aren't going to be ANY "tweaks" to fix it. seeing as its not on the list its probably noit going to be supported.
 

https://forums.techguy.org/threads/new-user-having-ram-issues-on-a-new-board.1103496/
Relevancy 40.85%

ok bought a barebones pc of ebay Came with a pc chips board wouldnt post reset jumpers and after a week of trying to get it to work finally said it was ead and went and bought a MSI KT board thinking this will fix problem installed cpu and heat sink installed board into case and installed stick of pc turned it on but same thing happened as before board to msi board..same chips from problem pc with pc chips board fans on cpu and vga card from pc chips board to msi board..same problem spin but just a black screen rset jumpers to clear and reset back tried again still wouldnt boot checked to make sure it board wasnt touching case and shorting from pc chips board to msi board..same problem out but everything seems to be good there theres no beep codes same as with pc chips board KT board comes with a pci slot attachment with usb and led error light when i start pc the light stay on red In manual it says that means cpu is not installed correctly from pc chips board to msi board..same problem or either it is damages reseated cpu and used some artic silver but still same thing and led light stay red im thinking there was nothing wrong with pc chips board just like theres nothing wrong with msi board Could it be the power supply It has a cheap power supply HERCULES is the name on it it weighs almost nothing Ive tried different stick of memory and vga card only things that are comman with problem cpu a AMD Athlon XP mhz and this cheap power supply The problem has to be with either the cpu or power supply thats what im thinking nbsp

A:from pc chips board to msi board..same problem

If ur not posting and considering what u've done coupled with the MSI diagnostics it is very likely there is a problem with this cpu.
You need to get a hold of another compatible AMD cpu just to see if u can post, from there u can confront the ebay seller for any restitution ovr the cpu if there was any kind of guarantee offered at all with the purchased items.
 

https://forums.techguy.org/threads/from-pc-chips-board-to-msi-board-same-problem.242873/
Relevancy 40.42%

Hi friends,
I have windows xp sp2 on 80gb harddisk , mother board mercury make,intel processor now this mercury mother borad what i have donot support ddr2 RAM, i had moved harddisk to intel motherboard box.

i am able to detect harddisk and windows apologies to start safe , last good menu and start normally and command prompt appears, i tried all options but fail to start windows xp.

MY IDEA IS AFTER LOGGING INTO WINDOWS , LOAD INTEL MOTHER BOARD DRIVERS.
Pl. find me solution to loginto windows and resume work.
THANK YOU

Regards
Vinod

A:moved windows xp sp2 harddisk from mercury mother board to intel mother board

welcome
you cant use the same xp on another motherboard.

http://www.techsupportforum.com/forums/f10/moved-windows-xp-sp2-harddisk-from-mercury-mother-board-to-intel-mother-board-354286.html
Relevancy 33.54%

So Dell made a really terrible 15 Series power 15 Can a board power board? a with Inspiron Dell Dell I Series Inspiron 5000 replace 7000 decision nbsp They have a transparent strip in the power button for an LED light to indicate if the power is on nbsp A power indicator is a given in any laptop no matter how cheap it is nbsp However Dell in all of it Can I replace a Dell Inspiron 15 5000 Series power board with a Dell Inspiron 15 7000 Series power board? s genius decided to not include an LED bulb on laptops up to the Inspiron Series despite leaving a transparent slot for it nbsp Seriously what happened to this brand nbsp Do children make these laptops now I want to fix this as my laptop is no longer returnable and a power indicator is absolutely necessary nbsp So the only thing I can think of is replacing it with one from the Series somehow Can I replace a Dell Inspiron 15 5000 Series power board with a Dell Inspiron 15 7000 Series power board? with some help probably This is a Dell Inspiron nbsp I also have an Inspiron nbsp Not sure which exact model I should get the part for Are they compatible Is there an easier way Like how Fn H turns on the hard drive indicator Thanks

A:Can I replace a Dell Inspiron 15 5000 Series power board with a Dell Inspiron 15 7000 Series power board?

The systems use different case and mainboard designs -- and may even be made by different companies.  The answer in all likelihood is no.
I don't think Apple has produced a Macbook with a power indicator -- the PC vendors are playing follow Apple.

http://en.community.dell.com/support-forums/laptop/f/3518/t/19981673
Relevancy 33.11%

Okay About three months ago I got hacked HARD permissions were changed administrator rights were removed from my administrator accounts etc i was flabbergasted THe iactually didn t bother me though until I ran a MBAM scan and found viruses and spyware instances on my drive NOT including tracking cookies I cleaned and recleaned using scan...won't Machine during reboots Spyware issues! updates. issues load Issues MBAM SuperantiSpyware Avira running each one in safe mode first then loading into my normal account and running them and finally erasing Machine reboots during Spyware scan...won't load updates. Issues issues issues! my user account and creating a new one But even after the new user account was created with Administrator privileges I still routinely received virus and Malware threat warnign flags from MBAM and Avira Eventually Avira and MBAM were disabled and Avira was quot deleted quot Windows will not uninstall because the setup exe file has been Changed quot and won t reinstall it because I don t have quot Administrator privileges quot on my Administrator accounts even though at startup I receive an error message saying that Avira has been corrupted The most telling issue is that antivirus and spyware Malware scans come up clean on Safe mode scans but using my normal account the machine reboots Using Superantispyware I notice that it s always during the memory test that this occurs and in Safe Mode it passes through this section with no issue None of my antivirus programs will download updates even ones I start manually and although I have no problem accessing my network Internet connection anytime I try to go to a site to download updates info or programs relating to Internet Security I get a quot You have no connection to the internet quot screen I ve tried initiating my PC maker s quot system recovery quot i e software reload program but the system just reboots just like when the antivirus programs are running I just want to clean my drive just enough that I can do a sys recovery wipe the slate and start over I will run and post a HJT log as soon as I know someone s ready to help Thanks in advance nbsp

A:Machine reboots during Spyware scan...won't load updates. Issues issues issues!

bump
 

https://forums.techguy.org/threads/machine-reboots-during-spyware-scan-wont-load-updates-issues-issues-issues.848982/
Relevancy 30.53%

What's up everybody??? Its good to be part of the Board!

Well...to start I have had this problem for over a week now and Im really losing hope...

Here are the facts:

1. I have NO sound from speakers, NO drag and Drop, UNABLE to paste from a copy...so I cant get all my important files OFF my computer to reformat...

2. IE doesn't open as well as Norton Antivirus, Or System Restore or System Installer, AVG wont launch due to installer problem...

3. Ran Regedit to erase some files...but cant run SR.INF or anything since I dont have service pack 2 disc on me right now...

4. Spybot scans for a while then reboots my computer...

5. I've used everything from Avira to Spybot, Hijack This to Spyware Terminator, AVG...etc...with Avira mainly doing the most good in identifying files...

So if there is ANYONE out there who can help...I would greatly appreciate it!

Thanks!!!
 

Relevancy 30.53%

This may not be the right place to post this but its close enough.

I need microphone help.

For the past few months my microphone just hasn't been working online! I have no clue why and nobody seems to be able to help me.

Its not because its muted or anything like that. We had a mic and it used to work but one day it just didn't work anymore so I bought a new one and that doesn't work online either.

It works fine with sound recorder, and with any voice test things for any applications, but whenever I enter an online game to use it, it seems to just shut off and disappear completely. It works while msn is running but whenever I click "start an audio conversation" it shuts off.

I am starting to get very agrivated so if you could help me out I'd appreciate it.

-Flea
 

https://forums.techguy.org/threads/perhaps-not-the-right-board.178195/
Relevancy 30.53%

I hope you kind folks can help me with a keylogger that I ve picked up a few days ago and haven t been able to get rid of I have a log here from hijackthis that I think points out the problem But I have no idea how to get rid of it Any help would be greatly appreciated Logfile of Trend Micro HijackThis v Scan saved at AM on Platform Unknown Windows WinNT MSIE Internet Explorer v Boot mode NormalRunning processes C Program Files x Norton Internet New need I and this help some to board Security Engine ccSvcHst exec Program Files x Hewlett-Packard TouchSmart Media Kernel CLML CLMLSvc exeC Program Files x Spybot - Search amp Destroy TeaTimer exeC Program Files x Hewlett-Packard HP Odometer New to this board and I need some help hpsysdrv exeC Program Files x Hewlett-Packard HP Remote Solution HP Remote Solution exeC Program Files x hp HP Software Update hpwuschd exeC Program Files x PictureMover Bin PictureMover exeC Program Files x Stardock Impulse Now ImpulseNow exeC Program Files x AVG AVG avgtray exeC Program Files x Lavasoft Ad-Aware AAWTray exeC Program Files x Trend Micro HijackThis HijackThis exeR - HKCU Software Microsoft Internet Explorer Main Default Page URL http g msn com HPDSK R - HKCU Software Microsoft Internet Explorer Main Search Page http go microsoft com fwlink LinkId R - HKCU Software Microsoft Internet Explorer Main Start Page http netscape aol com R - HKLM New to this board and I need some help Software Microsoft Internet Explorer Main Default Page URL http g msn com HPDSK R - HKLM Software Microsoft Internet Explorer Main Default Search URL http go microsoft com fwlink LinkId R - HKLM Software Microsoft Internet Explorer Main Search Page http go microsoft com fwlink LinkId R - HKLM Software Microsoft Internet Explorer Main Start Page http g msn com HPDSK R - HKLM Software Microsoft Internet Explorer Search SearchAssistant R - HKLM Software Microsoft Internet Explorer Search CustomizeSearch R - HKLM Software Microsoft Internet Explorer Main Local Page C Windows SysWOW blank htmR - HKCU Software Microsoft Internet Explorer Toolbar LinksFolderName O - BHO WormRadar com IESiteBlocker NavFilter - CA F - F E- B -A E- E E C C - C Program Files x AVG AVG avgssie dllO - BHO Spybot-S amp D IE Protection - - F - D - - D F - C Program Files x Spybot - Search amp Destroy SDHelper dllO - BHO no name - C C A-E - b - D - CECB - no file O - BHO Symantec NCO BHO - ADB E- AFF- - AA - DAC DFA - C Program Files x Norton Internet Security Engine coIEPlg dllO - BHO Symantec Intrusion Prevention - D EC - AAE- -AEEE-F F C - C Program Files x Norton Internet Security Engine IPSBHO DLLO - BHO Windows Live Sign-in Helper - D - C - ABF- ECC- C - C Program Files x Common Files Microsoft Shared Windows Live WindowsLiveLogin dllO - BHO Microsoft Live Search Toolbar Helper - d ce e -f a- - e- dc f c f - c Program Files x MSN Toolbar msneshellx dllO - Toolbar Microsoft Live Search Toolbar - E ED C- CB - d -B E -AB C C - c Program Files x MSN Toolbar msneshellx dllO - Toolbar Norton Toolbar - FEBEFE - B - - D -FFB D B CA - C Program Files x Norton Internet Security Engine coIEPlg dllO - HKLM Run hpsysdrv c program files x hewlett-packard HP odometer hpsysdrv exeO - HKLM Run HP Remote Solution ProgramFiles Hewlett-Packard HP Remote Solution HP Remote Solution exeO - HKLM Run HP Software Update c Program Files x HP HP Software Update HPWuSchd exeO - HKLM Run NortonOnlineBackupReminder quot C Program Files x Symantec Norton Online Backup Activation NobuActivation exe quot UNATTENDEDO - HKLM Run AVG TRAY C PROGRA AVG AVG avgtray exeO - HKLM Run TrojanScanner C Program Files x Trojan Remover Trjscan exe bootO - HKCU Run Steam quot C Program Files x Steam Steam exe quot -silentO - HKCU Run SpybotSD TeaTimer C Program Files x Spybot - Search amp Destroy TeaTimer exeO - HKCU Run tcactive C Program Files x The Cleaner tcap exeO - HKUS S- - - Run Sidebar ProgramFiles Windows Sidebar Sidebar exe autoRun User LOCAL SERVICE O - HKUS S- - - RunOnce mctadmi... Read more

A:New to this board and I need some help

Hello , And to the Bleeping Computer Malware Removal Forum. My name is Elise and I'll be glad to help you with your computer problems.I will be working on your malware issues, this may or may not solve other issues you may have with your machine.Please note that whatever repairs we make, are for fixing your computer problems only and by no means should be used on another computer.The cleaning process is not instant. Logs can take some time to research, so please be patient with me. I know that you need your computer working as quickly as possible, and I will work hard to help see that happen. Please reply using the Add/Reply button in the lower right hand corner of your screen. Do not start a new topic. The logs that you post should be pasted directly into the reply. Only attach them if requested or if they do not fit into the post.Unfortunately, if I do not hear back from you within 5 days, I will be forced to close your topic. If you still need help after I have closed your topic, send me or a moderator a personal message with the address of the thread or feel free to create a new one.You may want to keep the link to this topic in your favorites. Alternatively, you can click the button at the top bar of this topic and Track this Topic, where you can choose email notifications. The topics you are tracking are shown here.-----------------------------------------------------------If you have since resolved the original problem you were having, we would appreciate you letting us know. If not please perform the following steps below so we can have a look at the current condition of your machine. If you have not done so, include a clear description of the problems you're having, along with any steps you may have performed so far.If you have already posted a log, please do so again, as your situation may have changed.Use the 'Add Reply' and add the new log to this thread.We need to see some information about what is happening in your machine. Please perform the following scan:Please download OTL from one of the following mirrors:This is THE MirrorSave it to your desktop.Double click on the icon on your desktop.Click the "Scan All Users" checkbox.Push the button.Two reports will open, copy and paste them in a reply here:OTListIt.txt Will be openedExtra.txt Will be minimizedPlease download GMER from one of the following locations and save it to your desktop:Main MirrorThis version will download a randomly named file (Recommended)Zipped MirrorThis version will download a zip file you will need to extract first. If you use this mirror, please extract the zip file to your desktop.Disconnect from the Internet and close all running programs.Temporarily disable any real-time active protection so your security programs will not conflict with gmer's driver.Double-click on the randomly named GMER file (i.e. n7gmo46c.exe) and allow the gmer.sys driver to load if asked.Note: If you downloaded the zipped version, extract the file to its own folder such as C:\gmer and then double-click on gmer.exe.GMER will open to the Rootkit/Malware tab and perform an automatic quick scan when first run. (do not use the computer while the scan is in progress)If you receive a WARNING!!! about rootkit activity and are asked to fully scan your system...click NO.Now click the Scan button. If you see a rootkit warning window, click OK.When the scan is finished, click the Save... button to save the scan results to your Desktop. Save the file as gmer.log.Click the Copy button and paste the results into your next reply.Exit GMER and re-enable all active protection when done.-- If you encounter any problems, try running GMER in Safe Mode.-------------------------------------------------------------In the meantime please, do NOT install any new programs or update anything unless told to do so while we are fixing your problemIf you still need help, please include the following in your next replyA detailed description of your problemsA new OTL log (don't ... Read more

http://www.bleepingcomputer.com/forums/t/305174/new-to-this-board-and-i-need-some-help/
Relevancy 30.53%

Just got my hands on a Rampage III and have to say it looks twice as nice in person. However there is one issue, this being the number of usb headers on the mainboard. Whilst I had read somewhere that it was lacking in this area, I didn't expect to get a threefold decrease in them! This means I will have to ditch two usb's on the front panel and my card reader. I feel this is a bit unforgivable on a board so expensive. I thought I might return it as it's unused and get another but trouble is almost all the top boards don't have the three that I need with most only having two (including the big bang xpower).

Could anyone suggest a top board with 3?

A:Top X58 board...

GIGABYTE GA-X58A-UD9 LGA 1366 Intel X58 SATA 6Gb/s USB 3.0 XL ATX Intel Motherboard

This is a hard call, because I am an ASUS fan. But I think you will love this board.

http://www.sevenforums.com/hardware-devices/130334-top-x58-board.html
Relevancy 30.53%

I bought a X 260 yesterday and now find when I type @ it actually types " and vice versa .Can some one help me to correct this

https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/Key-Board-on-X-260/td-p/3377902
Relevancy 30.53%

Is ti possible to use 5V power from molex to power up my on-board USB because i think there is something wrong with the power.I checked the cable connection couple of times and still the same message "Usb device has malfunction" when I connect device like my joystick to another USB it works fine.
 

A:On-board USB q?

You can try.. There is a good chance of smoke emerging though

You should start with making sure it's not a Windows/driver issue. Use a Linux CD and a USB mouse to test.

Connecting a stub usb cable and measuring the voltages coming out of the port is another thing you should do before going and breaking anything.
 

http://www.techspot.com/community/topics/on-board-usb-q.41033/
Relevancy 30.53%

when typing on my key board certain keys produce a diffrent symbol from the one on the key .is there a diffrent setting or somthing i can change to coorect this.
cheers
 

Relevancy 30.53%

To start things off I would like to say hello to everyone on the board. My question that I ask of you is how can I get my print screen to work. I was just wondering if anyone knew any programs to get screen captures or shots while watching DVD of Windows Media Player. Now I tried to hit the print screen button and pass it to paint but it acts as if isnít anything there and gives me a black image where the DVD or media player was playing. I also down loaded the free print screen deluxe from download.com and it still didn't work. My last computer ran 98 and it worked fine, now that I have XP it wants to act stupid. Could you guys help me out if you can, it would be a big help.
 

Relevancy 30.53%

The XPS 13 laptop has an LED board in it. The board plugs into the motherboard, but it's not really clear to me what's for. The board is pictured here, www.ebay.com/.../262105473513

A:What is the LED board for?

It holds the system LEDs -- charging, power, etc.  They're on the front edge of the palmrest in this model.

http://en.community.dell.com/support-forums/laptop/f/3518/t/19993164
Relevancy 30.53%

hellow getsi live in pakistan. i hv HP envy 15 - 3207tx model B8M39PA. some keys of my laptop do not function. mechenics say it should be replaced. i did not find any key board in peshawar,  islam abad and even in lahore. its key board No is 668834-001. kindly help me how can i get key board. thanks 

http://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/key-board/td-p/5781751
Relevancy 30.53%

i built a computer with good specs... im very desprite so i cant type them up but it cost me over 3,000 dollars

its a athlon 3200XP+
asus motherboard
2 GB low latency corsair ram
500psu power supply
you know, all that good stuff

last night i was experminting with overclocking.. i did some voltage settings and it ran very fast, extreamly fast i liked it. well i got greedy and increaced some settings even higher and now IT ISNT BOOTING UP!!!! i cleared the cmos and everything i can think of.. im panicing out of my mind because
IM IN SO MUCH TOUBLE THIS ISNT MY COMPUTER!!

i tried different processors and ram
did i ruin the motherboard!!

any advice at all is helpfull!!!!
 

Relevancy 30.53%

I need help in locating drivers for a 648 MAX MSI motherboard, and I also need help in locating drivers for the network card also. Its ethernet

any help would be appreciated, I have XP-home edition installed on the computer
 

A:648 Max MSI board

I guess this is your board.
http://www.msicomputer.com/product/p_spec.asp?model=648_Max-L&class=mb

You have a sis chipset, so you look for sis, xp, drivers for whatever device you want.
http://www.msi.com.tw/program/support/driver/dvr/spt_dvr_list.php?part=1

I think the top driver here is for your lan.
http://www.msi.com.tw/program/support/driver/dvr/spt_dvr_list.php?part=1&kind=2&CHIP=2&COM=16

I think the top one here is agp.
http://www.msi.com.tw/program/support/driver/dvr/spt_dvr_list.php?part=1&kind=1&CHIP=1&COM=3

Or you can get drivers from sis.
http://www.sis.com/download/
Look that it's compatible with your motherboards chipset before you dl, it says your chipset on the link to your motherboard above.
 

http://www.techspot.com/community/topics/648-max-msi-board.29435/
Relevancy 30.53%

I have a compaq computer that stopped booting up about six months ago after i ran the restore disks. When I took it to a shop to be checked he found that by moving the RAM card to the empty slot worked and the computer did fine but he warned he didnt know if it would stay that way.
My daughter had to run the disks again and now its doing the same thing. I was told that the problem seemed to be in the mother board. My question is ... can i take the Ram card out of that computer and put it in my IBM compatible to increase its memory ... or will there be stuff from the other computer stored on that so that i cant use it in another computer?
HELP HELP
 

A:RAM Board

turtle523
RAM (Random Access Memory) only stores information temporarily
while the computer it is installed in is running. When a computer is properly shut down one of the functions of shutdown is to write information from the vcache to your hard drive.
So no usable information is stored on the RAM card.
Swapping RAM cards from one PC to another is not recommended since there are many different configurations of RAM and RAM cards and the card you pulled from the down unit may not be compatible with your other PC. Before you attempt such a swap you should do more investigation on what type of card was in the Compaq and what type is used in the other PC. Motherboards can be very fussy.
Dave
 

https://forums.techguy.org/threads/ram-board.55788/
Relevancy 30.53%

I'm probably looking right at it & can't see it. I usually see it at the top of other forums. I see 'forum rules' right away but not a list of 'how to's' which is what I need.
Thanks.

A:Where is board help

What help do you need with the forum?

Post it here.

Or look in the Tutorials.
http://www.sevenforums.com/tutorials/

http://www.sevenforums.com/general-discussion/230624-where-board-help.html
Relevancy 30.53%

my board is an ecs l7vmm3, can any one help me if i can put an 512mb ddr400 memory into it? im currently using 2x256mb ddr333. i just couldn't found info on their site regarding that matter. thanks
 

A:help ddr on my ecs board

Go here and do a scan: http://www.crucial.com/
Crucial says VMM2 supports DDR400, but they don't have VMM3 on the list, I don't know if it finds info for that board with the automatic scan...
 

https://forums.techguy.org/threads/help-ddr-on-my-ecs-board.775788/
Relevancy 30.53%

I am getting a Core i7 860 tomorrow. Also a Gigabyte P55-UD4P motherboard and some Mushkin 1600 RAM (7-8-7-20)

It should give me a couple of years of good use. (I hope)

Has anyone got a P55 setup yet. Anything bad or good you have heard about the platform.

I like to try new things. I could have got the i7 920 and a decent X58 board. that's boring. haha

I am hearing the i7 860 is right up there and even outperforms the 920 in some cases.

Anybody have any experience with Mushkin RAM? I was told to try it out. My friend seems to think I will be pleased with it.

I'm also wondering if anyone has a P55 board you have run into anything strange.

Thanks

A:Anyone have a P55 board set up yet?

I don't have one (yet) but I have only heard great things about the P55 chipset and especially the i7 860 processor. Be sure to let us know how it goes

http://www.sevenforums.com/hardware-devices/25011-anyone-have-p55-board-set-up-yet.html
Relevancy 30.53%

I have 2 keys on my keyboard that don't respond when hit. They are the letter B & N. Any ideas on whats causing this? Tried using different key board
with same results

A:key board

try a system restore to a previous date when it was working fine...you may have added or removed software recently that corrupted your keyboard driver did you say you tried a USB keyboard too and it did not work or vice versa if your original keyboard is a USB keyboard,,,then did you try a PS2 Keyboard and it did not work either...

http://www.techsupportforum.com/forums/f10/key-board-452712.html
Relevancy 30.53%

HI i was wondering if i could change the pc board in my laptop to an hp 688277-501 pc board.

A:need new pc board

Yes you could. Here is the Manual: Manual See p. 16. This would upgrade you from the E-300 processor to an E2-1800 which is a slight upgrade but still an upgrade. All other parts will be transferrable...memory heatsink wi-fi card etc.  If you need any more help post back If this is "the Answer" please click "Accept as Solution" to help others find it. 

http://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/need-new-pc-board/td-p/5641079
Relevancy 30.53%

eTrust anti-virus from CA inc is offering for FREE their ezArmor suite. ($49.95 value). Free updates for 1 year. This, IMHO, is a very good A/V and firewall program. Go HERE This is a CA and Microsoft offer. After 1 year, you pay only the renewal fee.
 

A:To all on the Board

Emtronics,

Thanks for this and all the good tips you give all year round.

Season Greeting.
 

https://forums.techguy.org/threads/to-all-on-the-board.185451/
Relevancy 30.53%

what ram would be best for the dfi nf4 sli board?

ocz has ram made just for dfi but i dont know
http://www.ocztechnology.com/produc...pc_5000_dual_channel_platinum_dfi_nf4_special

or should i go with something like this
http://www.ocztechnology.com/products/memory/ocz_el_ddr_pc_3200_dual_channel_platinum_rev_2
 

A:ram for dfi nf4 board

nice to see that a mobo manufacturer besides ABIT is putting out the extra money to put the good japanese caps on their boards. The specs for the board says it only supports DDR 400. So does that mean it won't support a Clawhammer with 1GHz FSB? weird. Anyway if you have a 1GHz FSB you would need the PC5000. i still don't get it. Sorry I'm an Intel guy so I'm not really into AMD, but no one was answering your post so.......... I thought all the 939 socket AMD's were 1GHz FSB? Someone correct me if I am wrong.
 

http://www.techspot.com/community/topics/ram-for-dfi-nf4-board.25045/
Relevancy 30.53%

HI I HAVE JUST INSTALED A VERSION OF WINDOWS XP HOME ON A FRIENDS
LAPTOP AMILO L7300 WE HAVE A PROBLEM THAT WHEN WE ARE TYPING IT GIVE SOME WRONG CHRATERISTICS TRIED THE NUMBER LOCK AND THE FN KEY STILL HAVE SAME PROBLEM

http://www.techsupportforum.com/forums/f10/key-board-461965.html
Relevancy 30.53%

okay for a while now i screwed my computer over and i burns it lol so i was useing my laptop ( i gave to my dad ) until i get a new comp. i hate typeing on the lap top key boards because i keep hiting the mouse my mistake and it jumps lines ( built in mouse ) and so i connected a USB kep board to it, now that when i un-plug the USB key board the original key board is F***ed like when i hit p its puts a - and its realy anoying and my dads going to be realy mad, can you help me fix it?
 

Relevancy 30.53%

Good day everyone I am working a machine laptop Bug on Board that the ie stopped opening Owner was not using any anti-virus or anti-spyware software AFter working on machine I have found that ie won t open at all Spybot S amp D won t install AVG won t update and Ad-Aware won t update I installed firefox from external hard drive which works just fine I have done online scans HouseCall and scanned with AVG outdated and Ad-Aware outdated all of which found items and cleaned them up Still with same issue Went online and ran hi-jack this and removed several more items to no avail Installed webroot anti-spyware which says there is a trojan among other cookies but won t tell me where it is or clean it w o forking over I am not Bug on Board sure that I believe webroot The hijack this log follows Any assistance provided would be greatly appreciated Logfile of Trend Micro HijackThis v Scan saved at PM on Platform Windows XP SP WinNT MSIE Internet Explorer v Boot mode Safe mode with network support Running processes C WINDOWS System smss exe C WINDOWS system Bug on Board winlogon exe C WINDOWS system services exe C WINDOWS system lsass exe C Program Files Webroot WebrootSecurity Bug on Board WRConsumerService exe C WINDOWS system svchost exe C WINDOWS system svchost exe C Program Files Lavasoft Ad-Aware AAWService exe C Program Files Webroot WebrootSecurity SpySweeper exe C WINDOWS Explorer EXE C Program Files Lavasoft Ad-Aware AAWTray exe C WINDOWS system ctfmon exe C Program Files Trend Micro HijackThis HijackThis exe R - HKCU Software Microsoft Internet Explorer Main Search Bar http www toshiba com search R - HKCU Software Microsoft Internet Explorer Main Start Page http www toshibadirect com dpdstart R - HKCU Software Microsoft Internet Connection Wizard ShellNext http www toshibadirect com dpdstart O - BHO Ask com Toolbar BHO - D C F- A- -A AD- D - C Program Files Ask com GenericAskToolbar dll O - Toolbar Ask com Toolbar - D C F- A- -A AD- D - C Program Files Ask com GenericAskToolbar dll O - HKLM Run DLCCCATS quot rundll quot C WINDOWS System spool DRIVERS W X DLCCtime dll email protected O - HKLM Run dlccmon exe quot C Program Files Dell Photo AIO Printer dlccmon exe quot O - HKLM Run lxcrmon exe quot C Program Files Lexmark Series lxcrmon exe quot O - HKLM Run EzPrint quot C Program Files Lexmark Series ezprint exe quot O - HKLM Run FaxCenterServer quot C Program Files Lexmark Fax Solutions fm exe quot s O - HKLM Run LXCRCATS quot rundll quot C WINDOWS System spool DRIVERS W X LXCRtime dll email protected O - HKLM Run tsnpstd quot C WINDOWS tsnpstd exe quot O - HKLM Run snpstd quot C WINDOWS vsnpstd exe quot O - HKLM Run QuickTime Task quot C Program Files QuickTime QTTask exe quot -atboottime O - HKLM Run iTunesHelper quot C Program Files iTunes iTunesHelper exe quot O - HKLM Run AppleSyncNotifier quot C Program Files Common Files Apple Mobile Device Support bin AppleSyncNotifier exe quot O - HKLM Run KernelFaultCheck quot C WINDOWS system dumprep quot -k O - HKLM Run AVG TRAY quot C PROGRA AVG AVG avgtray exe quot O - HKLM Run Ad-Watch quot C Program Files Lavasoft Ad-Aware AAWTray exe quot O - HKLM Run SpySweeper quot C Program Files Webroot WebrootSecurity SpySweeperUI exe quot startintray O - HKCU Run ctfmon exe C WINDOWS system ctfmon exe O - HKCU Run MSMSGS quot C Program Files Messenger msmsgs exe quot background O - HKCU Run TOSCDSPD quot C Program Files TOSHIBA TOSCDSPD toscdspd exe quot O - Global Startup Adobe Reader Speed Launch lnk C Program Files Adobe Acrobat Reader reader sl exe O - Global Startup Kodak EasyShare software lnk C Program Files Kodak Kodak EasyShare software bin EasyShare exe O - Global Startup KODAK Software Updater lnk C Program Files Kodak KODAK Software Updater Program Kodak Software Updater exe O - Extra context menu item amp Google Search - res C Program Files Google GoogleToolbar dll cmsearch html O - Extra context menu item Backward Links - res C Program Files Google GoogleToolbar dll cmback... Read more

https://forums.techguy.org/threads/bug-on-board.812783/
Relevancy 30.53%

Hi, i need a new board my computer is currently not working and it freezes at the motherboard screen ive done tons of tests and diganosed it to be the motherboard as the problem. (ive also posted about this a few weeks ago)

I need to get a replacement board thats cheap under 100 bucks pref if you can help thanks.

Motherboard That needs Replacing - MCP61PM-HM (Has AMD Processor in it)
 

Relevancy 30.53%

Looks like the 754 is an extinct species. But I still have a couple of working cpu for 754, and ddr400, and agp cards....so anybody know a source other than evil bay?
 

Relevancy 30.53%

Hi guys! How can i identify the proper driver for my driver on my onboard agp vid accelerator... I recently formatted my computer and forgot to get the details of my driver.. now im having problems with my vid adpater... help please
 

A:On board AGP Vid RAM

Try PC Wizard - linked below on my sig. I don't know if it'll work on a driverless board. Also, you can look at your motherboard, locate the model number - look it up with google.com

its either Intel, Nvidia, ATI/AMD, VIA or SIS.
 

https://forums.techguy.org/threads/on-board-agp-vid-ram.685178/
Relevancy 30.53%

I am working on a new project and I have scoured the internet for AMD CPU's and boards for real cheap, and I mean CHEAP!

I think I have found the lowest price, but I wanted to see if you guys had anything, I am looking for the ABSOLUTE CHEAPEST AMD board and cpu you can find while keeping it over 1Ghz
 

Relevancy 30.53%

Is a 4x, do I have to get a 4x card or will a 4x8x card work?
 

A:My board

if the card works in both 4x and 8x mode then a 4x slot should work fine. There may be a performance decrease running the card interface at half speed.
 

http://www.techspot.com/community/topics/my-board.44569/
Relevancy 30.53%

I have a very weird problem. My computer does not respond upon booting. It powers up but there is no response - the monitor stays in standby, the activity light on the CD-ROM stays ON, but in a multi-coloured manner and there's nothing I can do.

Maybe I'm wrong, but it looks as if power is coming to the M/Board from the PSU but not returning to the PSU to boot up the PC
 

https://forums.techguy.org/threads/is-it-the-psu-or-the-m-board.917233/
Relevancy 30.53%

i just changed the board in my pc it is a asus cusl2 when it goes to start xp fires up fo r second and shuts down wondering how much ram is needed to run xp
 

A:new board

how much ram have you - I have seen it run on 128Mb - certainly a lot of machines with 256Mb where sold

have you made sure the cooling is correct and put any heatsink compound between the fan & CPU - could it be over temperature and shutting down ?

did you put the FAN on the correct way round - some CPUs had a small slot/ridge along oneside and you had to get the CPU Fan assembly the correct way around to nake good contact
 

https://forums.techguy.org/threads/new-board.787411/
Relevancy 30.53%

Hi all.
First post here and it a question....my pc is over 4 yrs old running at 755mghz.
I know ****all about motherboards and cpu`s so do you think i should get a new board and bigger cpu or should i just get the bigger cpu???
Thanks in advance.
 

A:My Mo Board

Well there are a few things to consider while making this decision. First off, if you are fine with the performance of your current computer, then I don't see a need to update it and spend the money. But if you are looking for something a little faster or newer, then I would definately look into updating.
If you are interested in updating it, we will need more information on what type of motherboard you have, to see how fast of a processor it can take. But if it is 4 years old I am thinking you might need to get a new motherboard and CPU.
Post back with your system specs, or fill them out in your proflie
 

http://www.techspot.com/community/topics/my-mo-board.12459/
Relevancy 30.53%

I posted an earlier question about "PXE-E61: Media Test Failure, Check Cable"
I've been intouch with HP who told me it was probably the Hard Drive & the MB but a local PC store says that both are unlikely to be down, he tried to connect to the HD using an adapter but he couldn't detect it. So it's most likely the HD. Before I go buying a new HD I read about a PCB Board for sale on Ebay that fixes 50% of bad drives. I'm not sure of the likelyhood of this working - could it really work? and is it easy to change whatever I have to change?

http://cgi.ebay.com/SEAGATE-ST98082...ageNameZWD1VQQcmdZViewItem?_trksid=p1638.m118

Thanks.
 

Relevancy 30.53%

Could someone plese tell me how to input the power signs in algebra (windows 7). 3 to the power of 4
 

A:key board uses

Use the karot key (Shift - 6): ^. ex: 3^4
 

https://forums.techguy.org/threads/key-board-uses.958313/
Relevancy 30.53%

Having problem with my key board. I can't seem to get the letter B or N to work. any suggestions? I changed key boards which didn't help an run all scans and did system restore. Thank you
 

https://forums.techguy.org/threads/key-board.880563/
Relevancy 30.53%

Hi techspotters it has come time to modify my old rig I m planning to upgrade the cpu without changing my motherboard but there is a slight risk involved that the purchase I am going to make is with CPU board AM3+ AM3 faul So back to basics My current MB M A TD PRO AM3 board with AM3+ CPU USB - link Current CPU Phenom t oc running ghz Current RAM EVOleggera x running underclocked mhz the one to upgrade to AMD FX -- So this is a basic operation a cpu swap but few questions popped up on the research phase M A TD is a AM board which apparently after some searching supports some of the FX series cpus that are AM I have also found the corresponding BIOS that I need to flash myself to to make it work properly and be recognized by the MB link Q amp A FX is known to support mhz RAM speeds my existing RAM runs max at without overclock and is placed x which occupies all slots and might confuse the FX which supports dualchannel as usual Meaning I will need to leave my RAM running at mhz how big will the reduce be in the performance of the CPU- mhz vs When setting up the proceccor I will need to disable the Turbocore to make it stable on the older AM board which only supports cpu speeds up to ghz and the fx on turbo bumps to ghz After disabling turbo all cores are set to run at which by research is the most stable option on my existing MB Will FX bottleneck gtx or gtx and how bad it is going to be Upgrading hardware is always nice but am I making bold move by upgrading a year old cpu to almost as old one And if someone with more knowledge can state me that there is no performance gain to be maid I just might stick with my old as long as its still breathing and calculating Thanks in advance for replys And no changing an motherboard is not an option So fond of my old rig best regards m nbsp

http://www.techspot.com/community/topics/am3-board-with-am3-cpu.214400/
Relevancy 30.53%
Q: board

Laptop under warranty, including accidental damage, until spring, 2016.  Sent it for repairs...blotches on screen and keyboard failure 4 days ago.  Received it back today, july 10, w/ a note claiming device contains "biohardous material" and cannot ever be repaired by HP due to health danger to support techs.  What the hell sort of biohazard can a computer contain?  I'm elderly, live alone, keep the device on a table by itself.  There is no radioactivity within hundreds of miles of here.  I have NO health issues which would constitute a biohazard: early cataract, mild depression, occasional insomnia, high blood pressure.   What constitutes a biohazard so dangerous that a tech's health might be endangered?  I'm on a fixed income and cannot afford another computer.  I am at a total loss.  Is this some scam to avoid honoring a warranty on a not-too-popular device?  Please advise.  Thanks!    

A:board

I bought an HP spectre 360 notebook and purchased an HP accidental damage plan waranty and 2 year Care Pack. This plan covers accidental liquid spills. It has no exlcusions based on the type of liquid spill. NONE.  THERE ARE NO STATED EXCLUSIONS FOR BIOHAZARDS IN THE POLICY ACCORDING TO HP. I was at a coffee shop, and a friend bumped the table and knocked over water, coffe and tea. It spilled all over my computer. There were many witnesses. 3 keys on the computer stopped working after this liquid spill. I contacted HP and they offered to send on site repair staff, but I couldn't take 6 hours off of work to wait for them to come. HP preffered for me to send in the computer anyhow. They confrimed the liquid spill of coffee. tea, and/or water is a covered event. They sent me a box and I mailed the computer back in to them. I took photos of the computer condition before shipping. It was dry on the outside and we had shaken out as much of the liquid as we could. I sent the computer in. When it got there, I immeidately got an email about a cracked LCD. It did not have a cracked LCD when I shipped it and it was well packed. I called them and they said someone would get back to me. I then got a text about an hour later stating my computer was being shipped back to me. I figured it had been repaired. They gave no info about the computer itself. I got the box on April 27th. There were no biohazardous or dangerous material labels on the outside of the box. I opened it and pulled out my computer. The inside of the box was wet. the computer was dripping with a whiteish brown liquid that smelled of coffee. I immeidately took pictures and emailed them to HP to tell them they shipped me back my broken computer, they need to fix it. I figured the liquid on it was some of the spilled liquid that had shaken out of the computer on shipment. The liquid had been all over my hands. It seemed like an awful lot of liquid. I had the photos to show I shipped them a computer that was dry on the outside. I called HP and they informed me they had assessed the computer and had determined there was a "dangerous biohazard" liquid on it and they could not repair it because the liquid posed a "safety and health risk" to their staff. I looked in the box and saw a soaked white piece of paper with "biohazard" checked off as a reason why they would not fix it. This alleged "biohazard" was all over the notice itself, and was all over my hands. I had a complete nevrous breakdown and had to get medical care. I called HP and they did research and determined their service center thought the white/brown liquid was "urine." HP further accused the coffee shop of selling us drinks with urine in it. I went to the health dept and had a friend who is a biochemist assess the situation. All agreeed it was coffee, not urine, and HP was making serious and very wong accusations they had no basis to make. All agreeed HP was trying to pull whatever they could to get out of a covered repair. I called HP again and they looked at their own photos and they agreeed there was an error made by the service center and they agreeed to re-assess the computer. They sent me a box to mail the computer back to them. That box arrived May 2nd and I sent in the computer documenting the condition of the computer throughly and sealing it up at the FedEx office. I did not put biohazard labels on it becaus emany witnesses and professionals had determined it was not a biohazard and never had been. HP signed for the computer on May 3rd. On May 4th, HP agreed to refund the full amount of the computer, and said they would send me a box to send the computer back to them in. I pointe dout that they already had the computer. They signed for it on May 3rd. HP wrote me on May 5th to tell me they had searche their records and they again claimed there been a biohazard and the computer was shipped back to me ... Read more

http://h30434.www3.hp.com/t5/Notebook-Software-and-How-To-Questions/board/td-p/5145007
Relevancy 30.53%

Epox 8K7A, refurbished or at least returned once, installed
in comp II and seems fine except for one thing. I can't get
it to read bootdisk from A. A drive is okay, so says screen.
Bios is navigable. Did I get a bad board?? Can anything
be done? Anyone ever seen this particular problem. Is Epox
a name to stick with or are they known for bad boards, i.e.
pcchips??

Not real pleased,
Eric
 

A:Bad Board??

Hi there,

Noooo, don't get rid of the Epox board. I have an Epox CU133A+ and it's fantastic and has been running brilliantly for over a year.

I had a similair problem once though. Tell me, is it just a boot disk it wont read or is it all floppies? Does it automatically ask if you'd like to format the disk?

If so, it sounds more like a processor fault unfortunately.

Also, I know this is a stupid question, but on boot up have you set your BIOS to try to boot from A: ? If not, do this or try boot from A only.

Write back and tell me your findings.

Thanks,

Peaker.
 

https://forums.techguy.org/threads/bad-board.82371/
Relevancy 30.53%

hello i have recently upgraded my ram on my dfi lanparty 790fx dark mobo it has an amd 9550 phenom quad core processor 2.2ghz the ram i just put in it is dominator 1066 dual channel 2 gig sticks and after doing the computer now reads processor as 1.6ghz and me nor my room mate can figure out what the problem is so if anyone can please help
 

A:Not too sure if this is the right board but...

Did you chk the multiplier in bios?
 

http://www.techspot.com/community/topics/not-too-sure-if-this-is-the-right-board-but.114564/
Relevancy 30.53%

I have a gigabyte ga-m57sli-s4 and I was looking at going to an AM2+ processor at some point in the future. Have to figure out other problems first. I know the board will "work" with the newer AMDs but Gigabyte says:

(Note) If you install AMD AM2+ CPU on AM2 motherbord, the system bus speed will downgrade from HT3.0(5200MHz) to HT1.0(2000 MT/s) spec; however, the frequency of AM2+ CPU will not be impacted.

What does this mean exactly? Would a quad or tri with this impact act any better than my x2 5000 black (currently OC to 3.1). Do I need a newer board to run these in any way that will show gains.

I guess the main reason I'm asking is that Vista says my CPU has the lowest performance index of any of my parts. Like your thoughts. Thanks.
 

A:AM2+ in AM2 Board

It means that the HyperTransport link (the bus which connects the CPU to the rest of the system) will not be as fast as possible. I don't think it will bring a performance degradation on a desktop system though.
 

http://www.techspot.com/community/topics/am2-in-am2-board.108620/
Relevancy 30.53%

I'm planning on upgrading my processor later on to a core 2 duo e6750. The thing is what motherboard should I get because right now I'm on a dell E510 and the current motherboard in my computer doesn't support core 2 duo processors.
What's a good motherboard that will fit and is not too pricey?

Thanks.
 

A:What board?

You are likely better off building a whole new pc, rather than try to upgrade a dell. You may run into problems and find out that only other dell parts will fit your case.

If you think that you may want to upgrade in the future then it is best to build your own pc and stay away from propriatary parts. This way you won't have to worry about adding a new psu, mobo, etc.
 

https://forums.techguy.org/threads/what-board.652384/
Relevancy 30.53%
Q: board

I nbsp bought an HP spectre notebook nbsp and purchased an HP nbsp accidental damage plan waranty and year Care Pack This plan covers accidental liquid spills nbsp It has no exlcusions based on the type of liquid spill NONE nbsp THERE ARE NO STATED EXCLUSIONS FOR BIOHAZARDS IN THE POLICY ACCORDING TO HP nbsp I was at a coffee shop and a friend bumped the table and knocked over water coffe and tea It spilled all over my computer There were many witnesses nbsp keys on the computer stopped working after this liquid spill I contacted HP and they offered to board send on site repair staff but I couldn't take hours off of work board to wait for them to come HP preffered for me to send in the computer anyhow They confrimed the liquid spill of coffee tea and or water is a covered board event nbsp They sent me a box and I mailed the computer back in to them I took photos of the computer condition before shipping It was dry on the outside and we had shaken out as much of the liquid as we could I sent the computer in When it got there I immeidately got an email about a cracked LCD It did not have a cracked LCD when I shipped it and it was well packed nbsp I called them and they said someone would get back to me nbsp I then got a text about an hour later stating my computer was being shipped back to me I figured it had been repaired They gave no info about the computer itself nbsp I got the box on April th There were no biohazardous or dangerous material labels on the outside of the box I opened it and pulled out my computer The inside of the box was wet the computer was dripping with a whiteish brown liquid that smelled of coffee nbsp I immeidately took pictures and emailed them to HP to tell them they shipped me back my broken computer they need to fix it I figured the liquid on it was some of the spilled liquid that had shaken out of the computer on shipment The liquid had been all over my hands It seemed like an awful lot of liquid I had the photos to show I shipped them a computer that was dry on the outside nbsp I called HP and they informed me they had assessed the computer and had determined nbsp there was a nbsp dangerous biohazard liquid on it and they could not repair it because the liquid posed a safety and health risk to their staff nbsp I looked in the box and saw a soaked white piece of paper with biohazard checked off as a reason why they would not fix it This alleged biohazard was all over the notice itself and was all over my hands nbsp I had a complete nevrous breakdown and had to get medical care nbsp I called HP and they did research and determined their service center thought the white brown liquid was urine HP further accused the coffee shop of selling us drinks with urine in it I went to the health dept and had a friend who is a biochemist assess the situation All agreeed it was coffee not urine and HP was making serious and very wong accusations they had no basis to make All agreeed HP was trying to pull whatever they could to get out of a covered repair I called HP again and they looked at their own photos and they agreeed there was an error made by the service center and they agreeed to re-assess the computer nbsp They sent me a box to mail the computer back to them That box arrived May nd and I sent in the computer documenting the condition of the computer throughly and sealing it up at the FedEx office I did not put biohazard labels on it becaus emany witnesses and professionals had determined it was not a biohazard and never had been nbsp HP signed for the computer on May rd On May th HP agreed to refund the full amount of the computer and said they would send me a box to send the computer back to them in I pointe dout that they already had the computer They signed for it on May rd HP wrote me on May th to tell me they had searche their records and nbsp they again claimed there nbsp been a biohazard and the computer was shipped back to me on April th They told me the case was closed and indicated nothing abou... Read more

http://h30434.www3.hp.com/t5/Notebook-Operating-System-and-Recovery/board/td-p/5611850
Relevancy 30.1%

I am a disabled person am using On Screen Key Board I have Zimbra Desktop am trying to make the Fonts bigger where you read mail in your inbox it is to small they said You can use the CTRL plus the key + to zoom your Zimbra Desktop, and CTRL plus the key - to reduce the size with a regular Key Board can this be done with the On Screen Key Board

A:On Screen Key Board ?

Because of our previous "encounters", I'm only going to post once to this thread. You can achieve what you want by changing your resolution (go to a lower number).

http://www.techsupportforum.com/forums/f338/on-screen-key-board-1122538.html
Relevancy 30.1%

hi every one i have fujitsui v5535 lap top that i have restored but now keyboard symbols are wrong #this is pound sign and " this is @ have i down loaded wrong stuff or is it easy fix happy new year to you all
 

A:Solved: key board

you need to change the keyboard language
http://www.sevenforums.com/tutorials/86239-keyboard-layout-change.html
 

https://forums.techguy.org/threads/solved-key-board.1083132/
Relevancy 30.1%

I have an ASUS Maximus Formula X38 crossfire capable motherboard and I need to replace my hd3870 graphics that just died. I wish to purchase two cards and crossfire it now but do not know what is a compatable card that is available on the general market. I believe I will need to bridge them as the board itself will not. But most cards I see do not have a bridge connector. Has time past up my board?
ASUS Maximus Formula X38
E8400 Core2duo
Crucial 800 4 gb
550 ps
WD 320 & 640 Blue
XP Pro
 

A:What to crossfire on old x38 board

What power supply do you have? Using two cards will put higher load on the power supply then just one card.

You should be able to use any ATI cards you wish, as long as you have a power supply capable of handling it.

A single high end card may be better then two low end or mid range cards.
 

https://forums.techguy.org/threads/what-to-crossfire-on-old-x38-board.926203/
Relevancy 30.1%

this organization and people provide a great service As a computer novice it is great to get support from someone who knows computers ive purchased mcaffee for my computer the log new board..hijack to and norton for my brothers spyware was rampant on new to the board..hijack log both computers i cleaned deleted over files from the two computers Both are not right yet anyway here is my log Running processes C WINDOWS System smss exe C WINDOWS system new to the board..hijack log winlogon exe C WINDOWS system services exe C WINDOWS system lsass exe C WINDOWS system svchost exe C WINDOWS System svchost exe C WINDOWS system spoolsv exe C Program Files McAfee McAfee Privacy Service GUARDDOG EXE C WINDOWS System PackethSvc exe c PROGRA mcafee com vso mcvsrte exe C PROGRA McAfee com PERSON MPFSERVICE exe C PROGRA McAfee SPAMKI MSKSrvr exe C WINDOWS System nvsvc exe C WINDOWS system svchost exe C WINDOWS Explorer EXE C Program Files McAfee McAfee Privacy Service GUARDDOG EXE new to the board..hijack log c PROGRA mcafee com vso mcshield exe C PROGRA McAfee com PERSON MpfAgent exe c program files mcafee com agent mcagent exe C Program Files Common Files Microsoft Shared Works Shared WkUFind exe C Program Files Adaptec Easy CD Creator DirectCD DirectCD exe C PROGRA LEXMAR ACMonitor X exe C PROGRA LEXMAR AcBtnMgr X exe C PROGRA McAfee SPAMKI MskAgent exe C Program Files McAfee McAfee Shared Components Guardian CMGrdian exe C PROGRA mcafee com vso mcvsshld exe c progra mcafee com vso mcvsescn exe C PROGRA McAfee com PERSON MpfTray exe C Program Files Nextel Desktop Assistant vdac exe C WINDOWS Bbabc exe C WINDOWS System jmcpvl exe C Program Files Adobe Acrobat Distillr AcroTray exe C Program Files Common Files Microsoft Shared Works Shared wkcalrem exe C Program Files Microsoft Office Office OLFSNT EXE C Documents and Settings GoldCoast Local Settings Temp Temporary Directory for hijackthis zip HijackThis exe R - HKCU Software Microsoft Internet Explorer SearchURL http www iquicksearch com search htm R - HKCU Software Microsoft Internet Explorer Main Default Page URL http smbusiness dellnet com R - HKCU Software Microsoft Internet Explorer Main Search Bar http websearch drsnsrch com sidesearch cgi id R - HKCU Software Microsoft Internet Explorer Main Search Page http websearch drsnsrch com sidesearch cgi id R - HKCU Software Microsoft Internet Explorer Main Start Page http www yahoo com R - HKLM Software Microsoft Internet Explorer Main Search Bar http websearch drsnsrch com sidesearch cgi id R - HKLM Software Microsoft Internet Explorer Main Search Page http websearch drsnsrch com sidesearch cgi id R - HKLM Software Microsoft Internet Explorer Main Start Page http smbusiness dellnet com R - HKCU Software Microsoft Internet Explorer Search SearchAssistant http www iquicksearch com search htm R - HKLM Software Microsoft Internet Explorer Search SearchAssistant http websearch drsnsrch com sidesearch cgi id R - HKLM Software Microsoft Internet Explorer Search CustomizeSearch http websearch drsnsrch com sidesearch cgi id R - HKCU Software Microsoft Internet Explorer SearchURL Default websearch drsnsrch com q cgi q R - HKCU Software Microsoft Internet Explorer Main Start Page bak http www xxxtoolbar com ist script es manager php R - HKCU Software Microsoft Internet Connection Wizard ShellNext http smbusiness dellnet com R - URLSearchHook CleverHook Class - E F - FFB- -A -EA BC - C WINDOWS jeired dll O - Hosts aimtoday aol com O - Hosts aimtoday aol com O - Hosts search netscape com sitefinder verisign com O - BHO LocalNRDObj Class - -B C - A - F -F C D FAD - C WINDOWS localNRD dll O - BHO Band Class - F A A- C - -A - E DC AB E - C WINDOWS systb dll file missing O - BHO AcroIEHlprObj Class - E F-C D - D -B D- B D BE B - C Program Files Adobe Acrobat Reader ActiveX AcroIEHelper dll O - BHO CleverHook Class - E F - FFB- -A -EA BC - C WINDOWS jeired dll O - BHO CHungryBHO Object - BCF FB - F B- B-AECC- A - C WINDOWS hhUU dll file missing O - BHO McA... Read more

A:new to the board..hijack log

Welcome to TSF.

You didn't post the whole log file. Please post the header too after you do the fixes below.

Before you do anything else, please create a folder for HijackThis and put it in a permanent folder (like C:\HJT) instead of the Temp folder. This is required because HijackThis will create backups and we don't want them to be deleted.

Please print out or copy this page to Notepad. Make sure to work through the fixes in the exact order it is mentioned below. If there's anything that you don't understand, ask your question(s) before proceeding with the fixes. You should not have any open browsers when you are following the procedures below.

Go to My Computer->Tools/View->Folder Options->View tab and make sure that 'Show hidden files and folders' (or 'Show all files') is enabled. Also make sure that Display the contents of System Folders' is checked. Windows XP's search feature is a little different. When you click on 'All files and folders' on the left pane, click on the 'More advanced options' at the bottom. Make sure that Search system folders, Search hidden files and folders, and Search subfolders are checked.

For the options that you checked/enabled earlier, you may uncheck them after your log is clean. If we ask you to fix a program that you use or want to keep, please post back saying that (we don't know every program that exists, so we may tell you to delete a program that we think is bad to keep).

Download CWShredder and click on Fix (it will automatically fix anything it finds for you). If it asks if you want to delete a certain random file, choose No and post that filename here.

If you have a fast internet connection (broadband), run an online virus scan at TrendMicro. Make sure to select the Autoclean option. Otherwise, make sure your antivirus program has the latest definitions and run a full system scan.

Download RapidBlasterKiller and run it.

Reboot into Safe Mode (hit F8 key until menu shows up). Make sure to close any open browsers. Go into HijackThis->Config->Misc. Tools->Open process manager. Select the following and click Kill process for each one if they are still listed (they shouldn't be - but double check it):

C:\WINDOWS\Bbabc835.exe
C:\WINDOWS\System32\jmcpvl.exe

Uninstall the following via the Add/Remove Panel (Start->(Settings)->Control Panel->Add/Remove Programs) if they exist:

SpyKiller - it?s rogueware and we highly recommend that you uninstall it. Rogue/Suspect means that these products are of unknown, questionable, or dubious value as anti-spyware protection.

CometServer
PowerScan

Run a scan in HijackThis. Check each of the following and hit 'Fix checked' (after checking them) if they still exist (make sure not to miss any):

R1 - HKCU\Software\Microsoft\Internet Explorer,SearchURL = http://www.iquicksearch.com/search.htm
R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Default_Page_URL = http://smbusiness.dellnet.com/
R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Search Bar = http://websearch.drsnsrch.com/sidesearch.cgi?id=
R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Search Page = http://websearch.drsnsrch.com/sidesearch.cgi?id=
R0 - HKCU\Software\Microsoft\Internet Explorer\Main,Start Page = http://www.yahoo.com/
R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Search Bar = http://websearch.drsnsrch.com/sidesearch.cgi?id=
R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Search Page = http://websearch.drsnsrch.com/sidesearch.cgi?id=
R0 - HKLM\Software\Microsoft\Internet Explorer\Main,Start Page = http://smbusiness.dellnet.com/
R1 - HKCU\Software\Microsoft\Internet Explorer\Search,SearchAssistant = http://www.iquicksearch.com/search.htm
R0 - HKLM\Software\Microsoft\Internet Explorer\Search,SearchAssistant = http://websearch.drsnsrch.com/sidesearch.cgi?id=
R0 - HKLM\Software\Microsoft\Internet Explorer\Search,CustomizeSearch = http://websearch.drsnsrch.com/sidesearch.c... Read more

http://www.techsupportforum.com/forums/f284/new-to-the-board-hijack-log-24249.html
Relevancy 30.1%

Hi chaps,

I've just upgraded one of my PCs with a new motherboard, CPU etc, however when I came to boot it up Win2k threw a blue screen and said "INACCESSIBLE_BOOT_DEVICE".

The bios recognised both my existing IDE devices (HD, CD-ROM), however I can't do the things Win2k suggested (Remove HD Controllers, Run Chkdsk) because I can't get a command prompt or boot in any mode.

I've still got the old board, if that may be needed again.

Any help greatly appreciated,

Rep
 

A:New Board and Win2k

The operating system (OS) is tied very tightly to the hardware now days. Because you changed the motherboard, CPU, and etc. the OS is very confused. You need to re-install Windows 2000. I recommend you first backup your data, format the hard drive to start fresh, and then install Windows 2000.

Cheers.
 

https://forums.techguy.org/threads/new-board-and-win2k.58147/
Relevancy 30.1%

Hi All,

A mate of mine has got a Dual Core P4 that runs (used to run) on a gigabyte mbo but now it does not work.

All the fans including CPU and case fans work. All the LED's (power etc) all turn on. However, i do not a get a POST beep to say that all is OK. I've had all hardware taken off the mbo and i do not get any success. I've had RAM removed and i do not get any beeping however i've known some mbo not to beep.

However, in my experiences repairing PC's, CPU rarely fail under normal/manufacturer use. Is there anyway for me to identify this problem as a dead cpu or mbo if i do not have other hardware to swap?

any help would be great. ta.

Steve
 

Relevancy 30.1%

Okay so I just got a stick of gb pc- dimm mhz pin count I also have x gb pc- I won't Ram board help! work please with have Ram won't work with board please help! an intel p gz it doesn't allow overclocking The system came with gb of kingston and mb of pc- If I try the two sticks of gb together or the other one seperately it won't boot If I stick the gb of pc- it wont even display the acer screen If I put the x gb it will show the acer screen but won't let me go into bios so I assume this is indicating a crash I am running an e intel core duo with an evga graphics card with mb dedicated Right now I am on the system with the mb in it but any other combination of ram and it will cease to boot Many thanks to whoever can help me with my problem as this is very frustrating The board says it supports up to gb at gb s

A:Ram won't work with board please help!

  
Quote: Originally Posted by hexxon


Okay so I just got a stick of 2gb pc-5300 dimm 667mhz 240 pin count. I also have 2x2gb pc-6400, I have an intel p946gz it doesn't allow overclocking. The system came with 1gb of kingston and 256mb of pc-4200. If I try the two sticks of 2gb together or the other one seperately it won't boot. If I stick the 2gb of pc-5300 it wont even display the acer screen. If I put the 2x2gb it will show the acer screen, but won't let me go into bios so I assume this is indicating a crash? I am running an e6400 intel core 2 duo with an evga 210 graphics card with 512mb dedicated. Right now I am on the system with the 1256mb in it, but any other combination of ram and it will cease to boot. Many thanks to whoever can help me with my problem as this is very frustrating. The board says it supports up to 8gb at 10.8gb/s.


From what i read on Intel's site, this Intel946GZ supports max 4gb ram @ 800MHz FSB, so there should be no problem with installing your 2x2gb PC-6400....have you run a memory check on those 2x2gb sticks?

http://www.sevenforums.com/hardware-devices/99244-ram-wont-work-board-please-help.html
Relevancy 30.1%

Is it possible to change mother boards without losing my installation of XP?
 

Relevancy 30.1%

I have a Compaq Presario CQ5210f with a M2N68-LA (Narra6) motherboard and I also have a old Compaq Presario SR1010NX with a MS-6577 (Giovani, Giovani2) mother board and it seems like the second mother board is better than the first. I would like to know which one is better because I have both computer towers but only use the CQ5210f. I am planning on putting in a new graphics card soon and I cant afford a whole new computer or motherboard right now so I have to pick between these to.

SR1010NX mother board: HP and Compaq Desktop PCs - Motherboard Specifications, MS-6577 (Giovani, Giovani2) - c00063244 - HP Business Support Center

Narra6 mother board: https://h10025.www1.hp.com/ewfrf/wc/...6&lang=en#N389

A:Which Mother Board is better?

No contest the second one. The first is an ancient (in computer terms) Pentium 4/DDR/AGP based board, whereas the first is a much more recent AMD AM3/DDR3/PCI-E board that the Compaq bios allowing can up to probably the Phenom II x4 965, which will eat that old P4 for breakfast (would eat for lunch and dinner too).

http://www.sevenforums.com/hardware-devices/160234-mother-board-better.html
Relevancy 30.1%

will a p2b board fit in a mid-tower?
i have to replace my tower (i believe is a full tower, the cage is nose to nose with the board however)
and need to know if i can use a mid tower?
 

A:will a p2b board fit in a mid-tower?

p2b board?? Motherboards are described by form form factor. IE... AT, ATX, Baby At, Micro At. I am not sure what p2b means. Do you know what brand and model the motherboard is?

Let us know
 

https://forums.techguy.org/threads/will-a-p2b-board-fit-in-a-mid-tower.114622/
Relevancy 30.1%

I have recently purchased the 8X-GA-7VAX K7 Triton 400 series. Also was suggested to try the A-open GFMX440 64mb vid card 4x. I can't seem to get the video going. My board posts and the monitor works on another puter. Is there a jumper that I'm missing or what??
 

https://forums.techguy.org/threads/gigabyte-board.113880/
Relevancy 30.1%

My Friend in CA tells me that when she try to type, her key board just make her computer beep, and i ask her to check the sticky keys and she said it isn't the sticky key. What can she do?

A:Key Board not working

oh yeah she say she put other key boards on the computer and get the same problem.

http://www.sevenforums.com/hardware-devices/102495-key-board-not-working.html
Relevancy 30.1%

when i try to play msn game zone games like bejeweled
all i get is a black square i can go to rooms and play
spades and checkers but all board games remain a black
square i have enabled cookies and numerous other things
nothing works please help!!!!!! my wife is having bejeweled
with drawals
 

A:msn board games

Try this link
http://support.microsoft.com/Support/Games/Zone/Tshoot/Causes/ActScript_Lby.asp

Also I would suggest going to windows update and downloading the current updates

also clean out your cache in internet explorer by going to tools, internet options, temporary internet options, delete.

Also update your virtual machine to this link'\
http://www.microsoft.com/java

[Edited by brianF on 07-22-2001 at 10:43 PM]
 

https://forums.techguy.org/threads/msn-board-games.48837/
Relevancy 30.1%

This is the firt time I have used a forum so I hope I am doing this correctly. I am still new with computers and I installed my first new motherboard today. Every thing went good but I hooked the on off switch wires incorrectly. I think I got it on two + posts. Needless to say I did let some smoke out of the switch box. I have since corrected this but now the computer will not boot up. Did I fry the new motherboard? Any help I can get would greatly be appriciated.
Paul

http://www.vistax64.com/general-discussion/268210-new-mother-board.html
Relevancy 30.1%

The only way I can write with my k/bd is to hold the key down for 3seconds,
every key is effected. Can you help ?
Harry.M
 

A:key board problem

Take a look in Control Panel > Keyboard and see if it can be adjusted there.
 

https://forums.techguy.org/threads/key-board-problem.348036/
Relevancy 30.1%

Hi all, i need to help with choose my MOBO, cause i have GA-X58A-UD3R and have problem with memory maping.
http://www.sevenforums.com/overclock...59-my-ram.html

I try all solution and nothing help.Sometimes it boot with all 5Gb, but usualy only 2Gb or 3GB usable
Memory are all right i try them all in 1st white slot with memtest-all passed without error.

So i wanna chose from this boards:
ASUS P6T SE | Alza.cz
ASROCK X58 EXTREME | Alza.cz

And my memory are Zeppelin Gold Evolve 6GB (3x2G kit) DDR3 1600MHz

A:What board you recommend ?

Be sure to get one that will let you roll back the BIOS........Some won't.....

http://www.sevenforums.com/hardware-devices/106267-what-board-you-recommend.html
Relevancy 30.1%

How can I find out what mother board I have?

--maxim
 

A:Mother board

You can download sisoftsandra from http://www.tweakfiles.com It will identify some motherboards or else the hard way. Look at it and find the manufacturers make and model or the fcc number. The fcc number is generally located right around the dimm slots.

or you can try ctbios, it will read the bios rom's and report what is there. http://www.windrivers.com/identity/mboard/biosid.htm

 

https://forums.techguy.org/threads/mother-board.49773/
Relevancy 30.1%

How does the board look all weird, its white background? Looks like the page isn't loading?

A:Whats going on with the board

It looks fine with Internet Explorer.

http://www.sevenforums.com/browsers-mail/124464-whats-going-board.html
Relevancy 30.1%

well don't now if anybody can help but ill give it a go.
bought packard bell 5077 (imedia) last year for my wife working ok very good spec, but was getting board of the case (tower) so bought new case & swopped everything over ok all works fine apart from have no idea how to wire up the the top usb2 ports, yes it had them before but were all multi block conections now its loads of single wires HELP HELP. the only thing i can get from the net is the mother board is a columbia4?????? but cant get the full wiring diagram. any help would be nice CHEERS..
 

https://forums.techguy.org/threads/mother-board-usb-set-up.226807/
Relevancy 30.1%

Ok basically there's a new version of my motherboard out that supports the UCC function for AMD's.
I have been doing some research, and it turns out my CPU unlocks into something called a Phenom II FX5000.
Now my question is, the only difference between my board:
ASRock > Products > N68-S

And the UCC board:
ASRock > Products > N68-S UCC

Is the colours, so I'm just wondering, is it possible to flash my BIOS with a UCC boards BIOS? I just thought I would check here first, because I don't want to say bye bye to a board I brought not 1 year ago.

A:Update into UCC board?

I hate doing this, but.. *BUMP*

http://www.sevenforums.com/hardware-devices/113760-update-into-ucc-board.html
Relevancy 30.1%

Can anyone tell me how to diable my On Board Graphics?
 

A:On Board Graphics

Usually there are 2 ways to disable onboard video, either in the bios or by means of a jumper located on the mainboard. You don't give any information here as to what type of machine/board you have but I would suggest looking in you manual for information. In the absence of the manual look first in your bios, you'll probably find the switch there and you can disable the onboard video.
 

https://forums.techguy.org/threads/on-board-graphics.73736/
Relevancy 30.1%

Question: I have an old PS/2 A4 Tech Cordless mouse IR Transmitter/Receiver. Can I connect that to my IrDA port on my motherboard? the IrDA port on my board has 6 pins which are:

1. Power +
2. FIR
3. IR Data Input
4. GND
5. IR Data Output
6. Over Current

is it possible to do? the IR Transmitter/Reciever that I have has just the standard PS/2 wiring.
 

https://forums.techguy.org/threads/ps-2-ir-on-board-ir-port.110214/
Relevancy 30.1%

hi i just swapped a pc in to a new tower board is a m848a ver 2.1.
everything was fine last night although i was short a couple of power sockets for the case fans.
got the adaptors this morning plugged them in and all i got was a long continuous beep unplugged them in case they were draining power, still beeping.
Unplugged everything exept ram and graphics card, still beeping .
Cleared the cmos jumper and reset no beeping but will not boot ??????????? Any help would be greatly appreciated


hi again the chip is a amd 2200+
the psu is a kobian 280 w
hdd 200gig ata
ram 512 crucial 184 pin 333
graphics card nvidia 32 mb
all was working untill this morning
i put 2 case fans with led in to a 3 pin power splitter to attach both to the mother board
 

http://www.techspot.com/community/topics/help-board-gone-wrong.50732/
Relevancy 30.1%

The letter l (L) appears on its one and all the time. However if I select L it does not work.Also the mouse pad is not always working. I can hear the binging sound in the background and sometimes it just goes back to the log in page.My laptop went mental, how can this be fixed?

http://h30434.www3.hp.com/t5/Notebook-Boot-and-Lockup/key-board-error/td-p/5634973