Windows Support Forum

Getting the error Windows Update Client failed to detect with error 0x800b0001

Q: Getting the error Windows Update Client failed to detect with error 0x800b0001

Hi All

Some of our client machine(Windows7) is not taking update from WSUS server. When we verified the WindowsUpdate logs, we could see that WU client version is changed to 7.6.7600.256 from 7.5.7601.17514.Our WSUS server is running with version WSUS 3.0 SP1 on windows 2003 server. So we suspect this may be the reason windows 7 machines is getting the error message 'Windows Update Client failed to detect with error 0x800b0001' when it try to get the update from WSUS server.

So please suggest any steps to change the WU client version on windows 7 back to 7.5.7601.17514

Please find the attached log file.

Relevancy 100%
Preferred Solution: Getting the error Windows Update Client failed to detect with error 0x800b0001

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Getting the error Windows Update Client failed to detect with error 0x800b0001

Hi this is about your error Error code when you try to use Windows Update or Microsoft Update to install updates: "0x800B0001"

http://www.techsupportforum.com/forums/f217/getting-the-error-windows-update-client-failed-to-detect-with-error-0x800b0001-658345.html
Relevancy 93.62%

Hi all System Win Prof bit SP Automatic updates went into loop few days ago when the installation of optional update KB failed Log files had several entries with x bc error Inspite of hiding the update the problem persisted Tried lot of microsoft fix it's few other stuffs and the current state of - detect failed with Windows 0x80070bc9 Looping Client Update to error the computer is a After I login into the system Windows update says quot Check for updates for your computer quot with RED Check Mark Always install updates to enhance your computer's security b When I invoke quot Check for updates quot button After sometime it shows quot Restart your computer to install important updates Windows Windows Update Client failed to detect with error 0x80070bc9 - Looping can't update important files and services while system is using them save any open c If I invoke quot Restart now' button it would repeat to step a This is in a loop now no more updates are visible in the screen including the hidden updates ReportingEvents log file a AutomaticUpdates Failure Software Synchronization Windows Update Client failed to detect with error x a bc SelfUpdate Failure Software Synchronization Windows Update Client failed to detect with error x bc Windows Update Client failed to detect with error 0x80070bc9 - Looping bc is the one which is appearing for the past weeks windows update log file - - d Agent Windows Update access disabled No - - d DnldMgr Download manager restoring downloads - - d AU AU Initializing Automatic Updates - - d AU AU disabled through User preference - - d AU Will interact with non-admins Non-admins are elevated User preference - - d AU Will display featured software notifications User preference - - d AU Initializing featured updates - - d AU Found cached featured updates - - d Report Report Initializing static reporting data - - d Report OS Version - - d Report OS Product Type x - - d Report Computer Brand Dell Inc - - d Report Computer Model Vostro - - d Report Bios Revision - - d Report Bios Name Default System BIOS - - d Report Bios Release Date - - T - - d Report Locale ID - - d AU Successfully wrote event for AU health state - - d AU Successfully wrote event for AU health state - - d AU AU finished delayed initialization - - Report CWERReporter finishing event handling OutputReport txt Failed to add and register service f -a - - - a d efe d to the data store x CheckSur LOG No errors detected Windows Update Posting Steps Installed SURT no issues SFC Scan No issues Windows Update screen shots attached Log collection Zip attached Anyway to fix windows update without reinstalling Windows Thanks Vasanth

A:Windows Update Client failed to detect with error 0x80070bc9 - Looping

Hello and welcome snvasanth try this Windows update error 0x80070BC9 with windows 7

na d it may be worth while installing the Microsoft Readiness Tool.


The error you are getting seems to be related to an Office program too - have you just installed one recently or updated it?

Anyhow the Readiness Tool is worth getting anyway.

Download System Update Readiness Tool for Windows Server 2008 R2 x64 Edition (KB947821) [November 2012] from Official Microsoft Download Center

http://www.sevenforums.com/windows-updates-activation/270317-windows-update-client-failed-detect-error-0x80070bc9-looping.html
Relevancy 90.21%

Tried the following Update works if I bypass the router ie connect the PC directly to modem It also works from different ISP through router at work Format disk amp Reinstall windows From windowsupdate log - - c Misc WARNING WinHttp SendRequestUsingProxy failed for lt http download windowsupdate com v windowsupdate redir muv wuredir cab gt error x efd - - c Misc WARNING WinHttp SendRequestToServerForFileInformation MakeRequest failed error x efd - - c Misc WARNING WinHttp SendRequestToServerForFileInformation failed with x efd - - c Misc WARNING WinHttp ShouldFileBeDownloaded failed with x efd - - c Misc WARNING DownloadFileInternal failed for http download windowsupdate com v windowsupdate redir muv wuredir cab error x efd - - c Misc Validating signature for C Windows SoftwareDistribution WuRedir F B -E - B -B - A BC C muv wuredir cab - - c Misc Microsoft signed Yes - - c Misc WARNING SendRequest failed with hr efd Proxy List used lt gt Bypass List used lt null gt 0x80072efd update - with Windows Client error Windows detect Update to Can't failed 7 Auth Schemes used lt gt - - c Misc WARNING WinHttp SendRequestUsingProxy failed for lt http download microsoft com v windowsupdate redir muv wuredir cab gt error x efd - - c Misc WARNING WinHttp SendRequestToServerForFileInformation MakeRequest failed error x efd - - c Misc WARNING WinHttp SendRequestToServerForFileInformation failed with x efd - - c Misc WARNING WinHttp ShouldFileBeDownloaded failed with x efd - - c Misc WARNING SendRequest failed with hr efd Proxy List used lt gt Bypass List used lt null gt Auth Schemes used lt gt - - c Misc WARNING WinHttp SendRequestUsingProxy failed for lt http download microsoft com v windowsupdate redir muv wuredir cab gt error x efd - - c Misc WARNING WinHttp SendRequestToServerForFileInformation MakeRequest failed error x efd - - c Misc WARNING WinHttp SendRequestToServerForFileInformation failed with x efd - - c Misc WARNING WinHttp ShouldFileBeDownloaded failed with x efd - - c Misc WARNING SendRequest failed with hr efd Proxy List used lt gt Bypass List used lt null gt Auth Schemes used lt gt - - c Misc WARNING WinHttp SendRequestUsingProxy failed for lt http download microsoft com v windowsupdate Can't update Windows 7 - Windows Update Client failed to detect with error 0x80072efd redir muv wuredir cab gt Can't update Windows 7 - Windows Update Client failed to detect with error 0x80072efd error x efd - - c Misc WARNING WinHttp SendRequestToServerForFileInformation MakeRequest failed error x efd - - c Misc WARNING WinHttp SendRequestToServerForFileInformation failed with x efd - - c Misc WARNING WinHttp ShouldFileBeDownloaded failed with x efd - - c Misc WARNING SendRequest failed with hr efd Proxy List used lt gt Bypass List used lt null gt Auth Schemes used lt gt - - c Misc WARNING WinHttp SendRequestUsingProxy failed for lt http download microsoft com v windowsupdate redir muv wuredir cab gt error x efd - - c Misc WARNING WinHttp SendRequestToServerForFileInformation MakeRequest failed error x efd - - c Misc WARNING WinHttp SendRequestToServerForFileInformation failed with x efd - - c Misc WARNING WinHttp ShouldFileBeDownloaded failed with x efd - - c Misc WARNING DownloadFileInternal failed for http download microsoft com v windowsupdate redir muv wuredir cab error x efd - - c Misc Validating signature for - - c Misc WARNING WinHttp SendRequestUsingProxy failed for lt http www update microsoft com v windowsupdate redir muv wuredir cab gt error x efd - - c Misc WARNING WinHttp SendRequestToServerForFileInformation MakeRequest failed error x efd - - c Misc WARNING WinHttp SendRequestToServerForFileInformation failed with x efd - - c Misc WARNING WinHttp ShouldFileBeDownloaded failed with x efd - - c Misc WARNING SendRequest failed with hr efd Proxy List used lt gt Bypass List used lt null gt Auth Schemes used lt gt - - c Misc WARNING WinHttp SendRequestUsingProxy failed for lt http www update microsoft com v windowsupdate redir muv wu... Read more

A:Can't update Windows 7 - Windows Update Client failed to detect with error 0x80072efd

Hi,
 
Try to remove the proxy server entry from the WinHTTP proxy configuration for Windows 7:
 
1.   
Click Start, and then type cmd in the Start programs and files box.
2.   
Right-click cmd.exe in the Programs list, and then click Run as administrator.
Note If you are prompted for an administrator password or confirmation, type the password or click Continue.
3.   
Type the following command and then press Enter:
netsh winhttp show proxy
Note The proxy setting is listed next to Proxy Server. If there is no proxy server, Direct Access <no proxy server> is shown in the Command Prompt window.
4.   
To remove the listed proxy setting, type the following command and then press Enter:

netsh winhttp reset proxy
5.   
Click Start, click All Programs, click Windows Update, and then try to download and install updates again.Alex Zhaozx
TechNet Community Support

https://social.technet.microsoft.com/Forums/en-US/f37e3638-beac-445a-83f4-21cf85cb05fe/cant-update-windows-7-windows-update-client-failed-to-detect-with-error-0x80072efd?forum=w7itproinstall
Relevancy 103.63%

Hi Guys,

I'm getting the following pop-up from Windows Defender when I start the computer. The same message pops up when I try to start the service manually:

"Windows could not start the Windows Defender service on Local Computer.

Error 0x800b0001: Unknown trust provider."

I've also noticed the Windows Update is unable to search for new updates, giving an Error Code 800B0001.

I've done some searching around the web and nothing I've done seems to work. What exactly is this error and does anyone have any suggestions as to how to fix it?

Thanks.

A:Windows Defender/Update Error 0x800b0001: Unknown trust provider

Try the Microsoft FixIt: Windows Update Not Working.

http://www.techsupportforum.com/forums/f217/windows-defender-update-error-0x800b0001-unknown-trust-provider-702304.html
Relevancy 82.13%

Greetings!
I have an Optiplex 9010 AIO. This morning I was trying to update the BIOS of my system, from A10 to A13. During the update process it showed an error: "ME FW Update Failed: Internal error: FWU_Buffer " - please see the photo below. Although the update failed on the Management Engine part, it still boots up and running OK. I tried couple of times to update the BIOS, and each time I got the same error. I tried to flash the A12 and A11 BIOS as well, A12 gives same error, and A11 has the same Management Engine version hence no use.
Any help on this is very much appreciated!

A:Optiplex 9010 AIO BIOS Update Error - ME FW Update Failed: Internal error: FWU_Buffer

Hi Stone3t,
Can you provide a screen shot showing the current BIOS version?

http://en.community.dell.com/support-forums/desktop/f/3514/t/19534388
Relevancy 80.84%

I HAVE A DELL LATITUDE D830 AND I HAVE DONE COMMAND PROMPT, I WANT TO INSTALL THE MICROSOFT SYSTEM UPDATE READINESS TOOL, I CANNOT TURN ON MY FIREWALL, I CANNOT DOWNLOAD ANYTHING BECAUSE OF THESE ERROR CODES. THE ONLY THING I CAN DO IS BUY A NEW COMPUTER.
BUT RIGHT NOW I CANNOT AFFORD ONE. I HAVE TRIED EVERYTHING AND NOTHING WORKS I KEEP GETTING   UNKNOWN TRUST PROVIDER 0X800B0001. WHAT CAN I DO TO RESOLVE THIS PROBLEM. THANK YOU  STEVE LARKIN  541-610-2286.

https://social.technet.microsoft.com/Forums/en-US/e34aeb5b-9693-4bd2-88cd-f2537ac4a637/error-codes-0x800b0001-0x800b0003?forum=w7itprosecurity
Relevancy 80.84%

Hello,

I followed the instructions from the link below at the C: prompt and received a "The file could not be copied" message. I am running XP on an old Dell Dimension 8100 that I literally only need to keep alive for another 2 weeks while I await its successor.

The HD has known issues (I get that warning message every time I boot up that a disk error has been detected, but I can usually just boot past it).

Please help! Thanks!!

http://www.techsupportforum.com/f10/ntdetect-failed-resolved-149634.html

A:NT DETECT FAILED Error

Hi,
Sorry my simple instructions didn't work. Here is another method recommended by a colleague. If this doesnt work post back and we'll try something else. I also suggest you download the diagnostic disc for your hard drive and boot from that to check your hard drive.



What you need to do is ask a friend or colleague that has Windows? XP Home? on their computer, if you can copy these files...

ntldr: NTDETECT.COM: and boot.ini

These are the three files that are needed to boot Windows?...

Now to gain access to these particular files, you will need to change the viewing attributes of the files so that the system files and folders are 'visible'...to do this...

Double click the My Computer desktop icon > Tools > Folder Options > View.

Once in here scroll to Files and Folders; then, tick Display contents of system folders...Scroll down to the next section Hidden Files and Folders > tick Show Hidden files and Folders; now Untick Hide extensions for known file types and Hide Protected Operating System Files. Close out of the My Computer window and reopen it.

Right click on the C: Drive > Explore... the three mentioned files will now be visible for you to copy to the floppy.

To make it even easier to 'see' the files, do this...

Go View > Details > Arrange icons by > Modified > Show in Groups. (You will need to go into "View" for each one of these steps.)

Copy them to a floppy disc; then, insert the floppy into your computer...this will allow the computer to boot up.

Once up and running, simply copy the three files from the floppy to the C: Drive.

Having done that, telephone your nearest Microsoft? Support Centre and ask them to email you a copy of their Bcupdate2.exe utility and follow the instructions that they give you.

One very important fact to take into consideration...The computer that you use to copy the files must have the same "flavour" of Windows? XP installed on it.
Unfortunately, you cannot use a computer with Windows? XP Professional, (as the file make-up is different) if your computer happens to have Windows? XP Home? installed...they must be the same version!

Of course, you will need to reverse the viewing attributes after you have copied the files. (Recommended, but not entirely essential.)

Give it a go and report back with the result and if there are any other queries/concerns.

http://www.techsupportforum.com/forums/f10/nt-detect-failed-error-168967.html
Relevancy 79.98%

Hi I'm running Windows bit I performed a clean install on a new hard drive I successfully ran a few updates with Windows update and eventually was offered the NET Framework Client Profile which i installed When i tried to check for updates after that it failed with error x f I have tried the quot FixIt quot tools from Microsoft none hav ehelped The only thing that allows me to check for updates succesfully is if I uninstall NET Framework Client Profile I downloaded more updates from the Microsoft catalog site specifically for NET hoping that these would fix the problem I have also tried reinstalling windows after having formatted the drive again and without any other software not even anti virus software running windows update The 4 causing Windows Update Client Error Framework .NET 0x8024402 Profile same thing happened the first few updates were succesfull but as soon as NET Client profile is installed checking for updates fails I have a few files that might be helpfull namely a Network capture .NET Framework 4 Client Profile causing Windows Update Error 0x8024402 taken during the attempted update check an excerpt from the WindowsUpdate log file Bottom line is though This problem only happens when i have NET framework Client Profile installed This is a very strange problem becuase I installed the NET Framework when it was released and have not had any issues with updates since then Its just recently since I reformatted Please help PS I had to append TXT to the cap file in order to upload it

A:.NET Framework 4 Client Profile causing Windows Update Error 0x8024402

So, I ended up intstalling .NET Framework 4.5 BETA and now I am able to check for and install updates through Windows Update.

http://www.sevenforums.com/windows-updates-activation/229315-net-framework-4-client-profile-causing-windows-update-error-0x8024402.html
Relevancy 79.98%

Update for Windows 7 Client Beta for x64-based Systems (KB963660)
Install this update to resolve issues with Media Player or Media Center for Windows 7 Beta where multimedia codecs are not functioning on or after 15 March 2009. For complete details of this update, see KB963660. After you install this item, you may have to restart your computer. This update is provided to you and licensed under the Windows 7 Prerelease License Terms.

An update is available that will replace certain audio and video codecs that expire in prerelease versions of Windows 7 on March 15, 2009
Yesterday update installing fail with error 80070643. Tryed manually also install it but no luck, any suggestion how to debug it why it fails or solution for this?

A:Update for Windows 7 Client Beta for x64-based Systems (KB963660) error

Same problem here, anyone get this to install after it fails the first time?

http://www.sevenforums.com/general-discussion/4460-update-windows-7-client-beta-x64-based-systems-kb963660-error.html
Relevancy 79.55%

Hello everyone I've looked around at other threads related Windows Error SP2 with Client Windows WSUS 80080005 7 Update server 3.0 to my issue and I can't seem to find a correct answer I have a computer lab that I've recently installed a Windows Enterprise image onto Dell Optiplex computers most are 's a few older 's I created the image using MDT and used one of the 's as a reference All has been well for about a month or two but recently computers are giving me Windows Update errors with the error code of I have a WSUS SP server running and all of my other computers seem to be getting their updates just fine nbsp WSUS has the problematic computers in it's database but it Windows Update Error 80080005 Windows 7 Client with WSUS 3.0 SP2 server shows that they haven't checked in for quot x quot days I have Avast Professional installed I Windows Update Error 80080005 Windows 7 Client with WSUS 3.0 SP2 server have OpenDNS configured to block bad websites etc and I also use an Untangle server to prevent access to bad websites nbsp I've ran a Malwarebytes' Anti-Malware scan on the affected computers as well as Windows Defender scan and Windows Live OneCare scans and all have found no malicious software I have also tried resetting the Windows update service as described here nbsp http support microsoft com kb nbsp as well as a script that supposedly does the same thing but also resets all previous update events but I can't find the script source right now I had ran it last week and it didn't work I'm currently running a SFC Scannow on one of the computers and now it has finished nbsp It gives the error Windows Resource Protection could not start the repair service nbsp I'll have to google that next The last windows update that ran on the computer that I'm working on now was installed on - - and was a Windows Defender Update KB Def Previous to that was updates KB and KB I guess I'll have to look at all of the other machines to see if they have the same updates installed Anyway has anyone else had this problem nbsp I've seen vista home editions and RC's but no real Windows Pro RTM versions in business environments where updates were controlled by WSUS Thanks for any help that you can provide By the way I only work at this location once a week tuesdays well thursdays too but I'm next door to this building but I have remote access so bare with me on trying to fix things

A:Windows Update Error 80080005 Windows 7 Client with WSUS 3.0 SP2 server

Alright, I re-attempted to run the "SFC /scannow" command under a Administrator Command Prompt window, and got this error:
"SFC /scannow error message: Windows Resource Protection could not start the repair service"
I searched around a bit, and found a suggestion to check that the TrustedInstaller/Windows Module Installer is running.
When trying to start the Windows Module Installer, I get this error: 
 

Windows Modules Installer - Error 1450 Insufficient System Resources
What a fun problem this is turning out to be.  I'd like
to just re-image these computers, but I fear that it'll just happen again and I'm wondering why it's only a handful of computers that are affected, yet I have over 65 machines that were all installed from the same exact image.
 
I'll keep poking along trying to find something that fixes this darn issue.  If anybody comes up with any ideas, I'll gladly try them.  Thanks!
 
Just found this: http://social.technet.microsoft.com/Forums/en-US/w7itproui/thread/42e2a200-defe-4c6b-a1b3-606836dcfabb
and I'm trying the suggestion to set the registry limit size to "no limit" (setting hex value of 0xfffffff) to see if it works.  If it gets the sfc to run, it might fix my windows update issue as well.
I have ArcGIS installed on 25 of the lab machines, and according to the link that I posted above, others have experienced problems after installing the ArcGIS software.  Hopefully I'm getting somewhere!

https://social.technet.microsoft.com/Forums/en-US/8d4ebdf4-9f69-4505-a7e2-0f2e1c6debb8/windows-update-error-80080005-windows-7-client-with-wsus-30-sp2-server?forum=w7itproinstall
Relevancy 79.55%

Getting below error when tried to do windows update from windows prof client Troubleshooting steps performed below didn't fixed the issue Error An error occurred while checking for nbsp new updates for your computer Error code EE windows update client version Steps performed Method net stop wuauserv ren c windows SoftwareDistribution softwaredistribution old net start wuauserv Method Start gt type cmd in start search gt right click run as administrator Copy issue 7 to update windows client.Seeking guidance Windows this 80072EE2,in professional error fix and paste the command below as given net stop wuauserv - OK cd systemroot - OK ren SoftwareDistribution SoftwareDistribution old - Duplicate file found so changed it to old net start wuauserv - OK net stop bits - The BITS service is not started message net start bits - OK net stop cryptsvc - OK cd systemroot system - OK ren catroot catroot old - Duplicate file found so changed it to old net start cryptsvc - OK regsvr Softpub dll s - OK regsvr Wintrust dll s - OK regsvr Initpki dll s - OK regsvr Mssip dll Windows update error 80072EE2,in windows 7 professional client.Seeking guidance to fix this issue s - OK Restart the computer Success Windows update now working Method sfc scannow WSUS server synchronization successful from upstream server and client communication to WSUS server is verified through downloading nbsp http mksasps iuident cab nbsp nbsp this link in client Windows update log - - nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp f c nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp PT nbsp nbsp Windows update error 80072EE2,in windows 7 professional client.Seeking guidance to fix this issue nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp WARNING Cached cookie has expired or new nbsp PID is available - - nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp f c nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp PT nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp Initializing simple targeting cookie clientId ee -f e - -a a - f ac target group MKS-Workstations DNS name mksdt na ad crbard com - - nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp f c nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp PT nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp Server URL http mksasps SimpleAuthWebService SimpleAuth asmx - - nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp f c nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp Misc nbsp nbsp nbsp nbsp nbsp nbsp WARNING Send failed with hr ee - - nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp f c nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp Misc nbsp nbsp nbsp nbsp nbsp nbsp WARNING SendRequest failed with hr ee Proxy List used lt null gt Bypass List used lt null gt Auth Schemes used lt gt - - nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp f c nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp Misc nbsp nbsp nbsp nbsp nbsp nbsp FATAL SOAP WinHttp - SendRequest SendRequestUsingProxy failed error x ee - - nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp f c nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp PT nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp Last proxy send request failed with hr x EE HTTP status code - - nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp f c nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp PT nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp Caller provided credentials No - - nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp f c nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp PT nbsp nbsp nbsp nbsp... Read more

https://social.technet.microsoft.com/Forums/en-US/6dcc891a-45a2-4f1b-b2a4-132313b571f4/windows-update-error-80072ee2in-windows-7-professional-clientseeking-guidance-to-fix-this-issue?forum=w7itprosecurity
Relevancy 79.55%

Getting below error when tried to do windows update from windows prof client Troubleshooting steps performed below didn't fixed the issue Error An error occurred while checking for nbsp new updates for your computer Error code this issue guidance 7 error fix to professional Windows client.Seeking windows 80072EE2,in update EE windows Windows update error 80072EE2,in windows 7 professional client.Seeking guidance to fix this issue update client version Steps performed Method net stop wuauserv Windows update error 80072EE2,in windows 7 professional client.Seeking guidance to fix this issue ren c windows SoftwareDistribution softwaredistribution old net start Windows update error 80072EE2,in windows 7 professional client.Seeking guidance to fix this issue wuauserv Method Start gt type cmd in start search gt right click run as administrator Copy and paste the command below as given net stop wuauserv - OK cd systemroot - OK ren SoftwareDistribution SoftwareDistribution old - Duplicate file found so changed it to old net start wuauserv - OK net stop bits - The BITS service is not started message net start bits - OK net stop cryptsvc - OK cd systemroot system - OK ren catroot catroot old - Duplicate file found so changed it to old net start cryptsvc - OK regsvr Softpub dll s - OK regsvr Wintrust dll s - OK regsvr Initpki dll s - OK regsvr Mssip dll s - OK Restart the computer Success Windows update now working Method sfc scannow WSUS server synchronization successful from upstream server and client communication to WSUS server is verified through downloading nbsp http mksasps iuident cab nbsp nbsp this link in client Windows update log - - nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp f c nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp PT nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp WARNING Cached cookie has expired or new nbsp PID is available - - nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp f c nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp PT nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp Initializing simple targeting cookie clientId ee -f e - -a a - f ac target group MKS-Workstations DNS name mksdt na ad crbard com - - nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp f c nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp PT nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp Server URL http mksasps SimpleAuthWebService SimpleAuth asmx - - nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp f c nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp Misc nbsp nbsp nbsp nbsp nbsp nbsp WARNING Send failed with hr ee - - nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp f c nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp Misc nbsp nbsp nbsp nbsp nbsp nbsp WARNING SendRequest failed with hr ee Proxy List used lt null gt Bypass List used lt null gt Auth Schemes used lt gt - - nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp f c nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp Misc nbsp nbsp nbsp nbsp nbsp nbsp FATAL SOAP WinHttp - SendRequest SendRequestUsingProxy failed error x ee - - nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp f c nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp PT nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp Last proxy send request failed with hr x EE HTTP status code - - nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp f c nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp PT nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp Caller provided credentials No - - nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbs... Read more

https://social.technet.microsoft.com/Forums/en-US/2aedf679-8084-4740-aeb1-18cdf176c1c7/windows-update-error-80072ee2in-windows-7-professional-clientseeking-guidance-to-fix-this-issue?forum=w7itprogeneral
Relevancy 78.26%

got that error code whilst trying to run MS security essentials and while trying to install directX i got the quot regsvr initpki dll is missing quot error i can give pictures if needed please help ive tried several things i know my way around a computer i went to school for this type of stuff but im stumped i ran sfc scannow and apparently i have some corrupt system files which btw the scan was NOT able to complete i dont know how to manually fix them so im at a loss with that as well i can provide & code: error to regsvr32 initpki.dll due missing 0x800b0001 DirectX pictures if needed my first post on error code: 0x800b0001 & DirectX due to regsvr32 initpki.dll missing this forum so thanks in advance the first pic is what happens when i try and open MS security essentials the second is when i try and get directX the third is an update that i have tried numerous times to install with no luck figured it could be connected in some way also i would very much like to be able to solve this WITHOUT having to reinstall my OS thanks much love

A:error code: 0x800b0001 & DirectX due to regsvr32 initpki.dll missing

Hi, Welcome to Seven forums.

For this error:

Failed to find updates with error code 800B0001

It indicated that Windows Update engine files has been corrupted.

Please use the following steps to re-register system files:

1. Click Start, Run, type: notepad C:\register.bat and press Enter. Choose "Yes"
when you are prompted.
2. Copy the following commands and then paste them into the opened Notepad window.
net stop wuauserv
regsvr32 wuapi.dll /s
regsvr32 wups.dll /s
regsvr32 wuaueng.dll /s
regsvr32 wucltui.dll /s
regsvr32 wuweb.dll /s
regsvr32 msxml.dll /s
regsvr32 msxml2.dll /s
regsvr32 msxml3.dll /s
regsvr32 urlmon.dll /s
net start wuauserv
regsvr32 softpub.dll /s
regsvr32 initpki.dll /s
regsvr32 mssip32.dll /s
regsvr32 wintrust.dll /s
regsvr32 dssenh.dll /s
regsvr32 rsaenh.dll /s
regsvr32 gpkcsp.dll /s
regsvr32 sccbase.dll /s
regsvr32 slbcsp.dll /s
regsvr32 cryptdlg.dll /s
regsvr32 jscript.dll /s

3. After the above commands have been pasted, please close the Notepad window.
Choose "Yes" when you are prompted to save the file.
4. Click Start, Run, type: C:\register.bat and press Enter to run the commands that
have been pasted.

Once you have completed the above steps, try to connect to the Windows Update site
and download the Updates again.

FOR DirectX issue.

1. navigate to \Windows\System32\directx\ or \Windows\SysWow64\directx
if you have Windows 7 x64.
2. Click on "organise" file menu, then "folder and search options" then
in the "View" tab check "show hidden files and folders" and then "ok"
3. websetup folder will be visible now. go in there and delete all
contents.
4. run "dxwebsetup" again.

http://www.sevenforums.com/general-discussion/317666-error-code-0x800b0001-directx-due-regsvr32-initpki-dll-missing.html
Relevancy 77.83%

I have been trying to install the latest windows 7 updates for several days and all of them (14) keep failing. The same error is received for all of them, Error 8000ffff. I researched what the updates were for and it looks like they are for Windows 7 x64, I have Windows 7 x86. Also, just before this happened I started getting an error message that my windows was not genuine. But I ran the activation and it says it is genuine (I have had Windows 7 Professional for a couple of years). I did some googling and ran into several post that suggested uninstalling KB971033 (for the windows not genuine error), so I did that and the error message no longer shows.

The windows Malicious Tool update worked just fine.

Any ideas?

A:Windows 7 Update failed error 8000ffff

Uninstalling KB971033 just hides the problem, it does NOT solve it.
Please reinstall KB971033 from http://support.microsoft.com/kb/971033 and then post an MGADiag report.


Please follow this tutorial and post an MGADiag report - then we can see what the problem is.

http://www.sevenforums.com/windows-updates-activation/234159-windows-genuine-activation-issue-posting-instructions.html


Please also state the Version and Edition of Windows quoted on your COA sticker (if you have one) on the case of your machine (or inside the battery compartment), but do NOT quote the Key on the sticker!
http://www.microsoft.com/en-us/howtotell/Hardware.aspx

http://www.sevenforums.com/windows-updates-activation/257571-windows-7-update-failed-error-8000ffff.html
Relevancy 77.83%

I have Windows 7 with Internet Explorer 11 and I have done a Windows update with errors with Code 80200010 and Code 80246005 What are they to do with and what do I need to get to install successfully?

A:Windows Update two Codes error failed

Please follow the Windows Update Posting Instructions and post the requested data

If the file is too large (8MB compressed), remove the older CBSPersist cab files until the final file is below the limit - you can always post them separately after zipping them. (the forum doesn't allow the upload of bare CAB files, for a number of reasons)

Please also post the C:\Windows\windowsudpate.log file

http://www.sevenforums.com/windows-updates-activation/369871-windows-update-two-codes-error-failed.html
Relevancy 77.83%

My computer fails to install the update for windows 7 for 64x-based systems (KB2761217)

The error code is 8007065E

I've tried the windows fixit program and the problem still persists.

Attached is the CBS.log

Can I get some help please =)

A:Windows 7 update failed. Error 8007065E

The problem is this...

Code:
2013-11-03 09:07:39, Info CBS Read out cached package applicability for package: Package_for_KB2584146~31bf3856ad364e35~amd64~~6.1.1.3, ApplicableState: 112, CurrentState:112
2013-11-03 09:07:45, Info CBS Session: 30333086_301750403 initialized by client WindowsUpdateAgent.
2013-11-03 09:07:45, Info DPX Started DPX phase: Resume and Download Job
2013-11-03 09:07:45, Info DPX Started DPX phase: Apply Deltas Provided In File
2013-11-03 09:07:45, Info DPX Ended DPX phase: Apply Deltas Provided In File
2013-11-03 09:07:45, Info DPX Ended DPX phase: Resume and Download Job
2013-11-03 09:07:45, Info DPX DpxException hr=0x8007065e code=0x020217
2013-11-03 09:07:45, Info CBS Failed to extract file update.mum from cabinet \\?\C:\Windows\SoftwareDistribution\Download\8de8eccc51302e3ad3cd631c70492dc1\windows6.1-kb2761217-x64-express.cab [HRESULT = 0x8007065e - ERROR_UNSUPPORTED_TYPE]
2013-11-03 09:07:45, Info CBS Failed to extract package manifest from cabinet [HRESULT = 0x8007065e - ERROR_UNSUPPORTED_TYPE]
2013-11-03 09:07:45, Info CBS Failed to initialize internal package [HRESULT = 0x8007065e - ERROR_UNSUPPORTED_TYPE]
2013-11-03 09:07:45, Error CBS Failed to create internal package [HRESULT = 0x8007065e - ERROR_UNSUPPORTED_TYPE]
2013-11-03 09:07:48, Info CBS Session: 30333086_329562903 initialized by client WindowsUpdateAgent.
This appears to be corruption in the SoftwareDistribution folder

Let's see if we can cure it the 'easy way' -

Open an Elevated Command Prompt, and run the following command...

RD C:\Windows\SoftwareDistribution\Download\8de8eccc51302e3ad3cd631c70492dc1 /S /Q

reboot, and then run another Check for Updates - then try installing ONLY KB2584146.



Here are some instructions to make lifeeasier

1) To open anElevated Command Prompt Window (the ECP window), click on Start, All Programs,Accessories – then right-click on Command Prompt, and select Run asAdministrator. Accept the UAC prompt.

2) To run thecommands easier, highlight the block of commands, and right-click on thehighlight – select Copy. In the CP Window, click on the black/white icon at topleft – select Paste. The commands will run but may not complete the lastcommand, so hit the Enter Key once.

3) To copy theresults... click on the Black/White icon in the top left, and select Edit...'Select All', and hit the Enter key - then use Ctrl+V or r-click+Paste to pasteit into your response.

http://www.sevenforums.com/windows-updates-activation/310526-windows-7-update-failed-error-8007065e.html
Relevancy 77.83%

Windows update has not been able to install new updates for a couple of weeks. I first noticed this after getting a notification in my task tray saying that updates could not automatically install. However, updates will not manually install either.

I get the error "Windows Could not Search for New Updates" and error code 8024402C. (See attached screenshot).

I followed all the instructions in the Windows Update Posting Instructions Thread and have also attached my error log.

Please let me know what can be done to restore automatic updates. Thanks!

A:Windows Update Failed: Error 8024402C

Open Windows Update
Click on Change Settings
Select 'Never Update...'
Click OK
exit Windows Update
Now open Windows update again
Click on Change Settings
Select 'Update automatically'
Click OK
exit Windows Update
Open Windows Update, and do a manual Check for Updates.
If it still fails, please post an MGADiag report - it may show what the problem is, even if the tool isn't strictly applicable here.
Please follow this tutorial and post an MGADiag report - then we can see what the problem is.

http://www.sevenforums.com/windows-updates-activation/234159-windows-genuine-activation-issue-posting-instructions.html
Please also state the Version and Edition of Windows quoted on your COA sticker (if you have one) on the case of your machine (or inside the battery compartment), but do NOT quote the Key on the sticker!
http://www.microsoft.com/en-us/howtotell/Hardware.aspx

Ignore errors produced when clicking on the Copy button - they simply mean that the tool could not create the backup files for some reason. The data is still copied to the clipboard for pasting to your response.

http://www.sevenforums.com/windows-updates-activation/281811-windows-update-failed-error-8024402c.html
Relevancy 77.83%

Hello I have been having problems installing Important Security Updates and optional updates onto my machine I have tried to install them several times since they was released but every time I get the same Error Code B They are the following Important - Cumulative Security Update for Internet Explorer for Windows for x -based Systems KB - Failed Error 800B0100 Update Windows Security Update for Windows for x -based Systems KB - Security Update for Windows for x -based Systems KB - Security Update for Windows for x -based Systems KB Optional - Update for Windows for x -based Systems KB - Update for Windows for x -based Systems KB - Update for Windows for x -based Systems KB I have followed the steps from your quot Windows Update Posting Instructions quot Windows Update Failed Error 800B0100 and I have attached the logs to the thread as well However the CBS log will not allow me to read it so I created a new sfcdetails txt file on my desktop and included it with the zipped folder instead of the true CBS log file I hope that is alright There were also quot CbsPersist quot Cabinet Files in the Logs CBS folder which made the zipped file much too large so I did not include them Let me know if you do need them and I can put them on my google drive and give the link Thanks

A:Windows Update Failed Error 800B0100

Here's your CheckSUR error list

Code:
Summary:
Seconds executed: 1988
Found 30 errors
CBS MUM Corrupt Total count: 15
CBS Catalog Corrupt Total count: 15
Unavailable repair files:
servicing\packages\Package_102_for_KB3023562~31bf3856ad364e35~amd64~~6.1.1.2.mum
servicing\packages\Package_102_for_KB3023562~31bf3856ad364e35~amd64~~6.1.1.2.mum
servicing\packages\Package_103_for_KB3023562~31bf3856ad364e35~amd64~~6.1.1.2.mum
servicing\packages\Package_103_for_KB3023562~31bf3856ad364e35~amd64~~6.1.1.2.mum
servicing\packages\Package_104_for_KB3023562~31bf3856ad364e35~amd64~~6.1.1.2.mum
servicing\packages\Package_104_for_KB3023562~31bf3856ad364e35~amd64~~6.1.1.2.mum
servicing\packages\Package_105_for_KB3023562~31bf3856ad364e35~amd64~~6.1.1.2.mum
servicing\packages\Package_105_for_KB3023562~31bf3856ad364e35~amd64~~6.1.1.2.mum
servicing\packages\Package_108_for_KB3023562~31bf3856ad364e35~amd64~~6.1.1.2.mum
servicing\packages\Package_108_for_KB3023562~31bf3856ad364e35~amd64~~6.1.1.2.mum
servicing\packages\Package_109_for_KB3023562~31bf3856ad364e35~amd64~~6.1.1.2.mum
servicing\packages\Package_109_for_KB3023562~31bf3856ad364e35~amd64~~6.1.1.2.mum
servicing\packages\Package_110_for_KB3023562~31bf3856ad364e35~amd64~~6.1.1.2.mum
servicing\packages\Package_110_for_KB3023562~31bf3856ad364e35~amd64~~6.1.1.2.mum
servicing\packages\Package_111_for_KB3023562~31bf3856ad364e35~amd64~~6.1.1.2.mum
servicing\packages\Package_111_for_KB3023562~31bf3856ad364e35~amd64~~6.1.1.2.mum
servicing\packages\Package_49_for_KB3023562~31bf3856ad364e35~amd64~~6.1.1.2.mum
servicing\packages\Package_49_for_KB3023562~31bf3856ad364e35~amd64~~6.1.1.2.mum
servicing\packages\Package_50_for_KB3023562~31bf3856ad364e35~amd64~~6.1.1.2.mum
servicing\packages\Package_50_for_KB3023562~31bf3856ad364e35~amd64~~6.1.1.2.mum
servicing\packages\Package_51_for_KB3023562~31bf3856ad364e35~amd64~~6.1.1.2.mum
servicing\packages\Package_51_for_KB3023562~31bf3856ad364e35~amd64~~6.1.1.2.mum
servicing\packages\Package_52_for_KB3023562~31bf3856ad364e35~amd64~~6.1.1.2.mum
servicing\packages\Package_52_for_KB3023562~31bf3856ad364e35~amd64~~6.1.1.2.mum
servicing\packages\Package_77_for_KB3023562~31bf3856ad364e35~amd64~~6.1.1.2.mum
servicing\packages\Package_77_for_KB3023562~31bf3856ad364e35~amd64~~6.1.1.2.mum
servicing\packages\Package_for_KB3023562_SP1~31bf3856ad364e35~amd64~~6.1.1.2.mum
servicing\packages\Package_for_KB3023562_SP1~31bf3856ad364e35~amd64~~6.1.1.2.mum
servicing\packages\Package_for_KB3023562~31bf3856ad364e35~amd64~~6.1.1.2.mum
servicing\packages\Package_for_KB3023562~31bf3856ad364e35~amd64~~6.1.1.2.mum
I'll post a fix protocol later.

http://www.sevenforums.com/windows-updates-activation/363085-windows-update-failed-error-800b0100.html
Relevancy 77.83%

I have a Acer Windows 8 computer and its stuck on reverting update changes and restarting. It says "Failed configuring Windows Updates Reverting changes" then restarts and then does that again. I cannot go to the desktop. How do I fix this?

A:Windows 8 Failed to update reverting changes error

don't have a answer, but do have a suggestion ,its the weekend and all helpers are volunteers ,hang tough , someone will come along
some suggested reading in the meantime ,good luck
"Failure configuring Windows updates. Reverting changes. Do not turn off your computer" error when you try to install Windows updates

http://www.eightforums.com/windows-updates-activation/31409-windows-8-failed-update-reverting-changes-error.html
Relevancy 77.83%

Hi,
i am trying to install SP1 via windows update and it fails by giving error 800b0100.
i tried installing after antivirus and firewall disable. but same error.

Please help

A:Windows 7 SP1 update failed error 800b0100

Just in case our Richard {who is good with this particular Error problem} does NOT come to your rescue...
Please read through the link below.

Error Code 800B0100 when trying to install Windows Updates KB974145 - Microsoft Answers

http://www.sevenforums.com/windows-updates-activation/206992-windows-7-sp1-update-failed-error-800b0100.html
Relevancy 77.83%

Hi,
I've tried to install the sp1 update several times now, allways getting the error 800b0100.
I read up on the problem in several forums but nothing has worked for me. I ran the System Update Readiness Tool but I still can't install the update.
Hoping for some help here.

A:Windows 7 SP1 update failed error 800b0100

Please refer to the below links...

Error Code: 0x800B0100 - Can't install SP1 - Microsoft Answers

Error code 0x800B0100 when using Windows Update or Microsoft Update to install updates

Error Code 800B0100 when trying to install Windows Updates KB974145 - Microsoft Answers

Windows Update error 800B0100

http://www.sevenforums.com/windows-updates-activation/215858-windows-7-sp1-update-failed-error-800b0100.html
Relevancy 77.83%

800b0100 is the only code that is poppin up. hopefully I did all of this correctly. thanks

A:Windows Update Failed error 800b0100

Here's the SFC error...

Code:
2015-07-31 11:26:20, Info CSI 00000326 [SR] Repairing 1 components
2015-07-31 11:26:20, Info CSI 00000327 [SR] Beginning Verify and Repair transaction
2015-07-31 11:26:20, Info CSI 00000328 Hashes for file member \SystemRoot\WinSxS\x86_microsoft-windows-imagingengine_31bf3856ad364e35_6.1.7601.17514_none_2df065c88c5d1cef\ImagingEngine.dll do not match actual file [l:34{17}]"ImagingEngine.dll" :
Found: {l:32 b:gexYj1iOf5gx9+qYGp8EzvA0G1rfqclgNeXCyfJP/vc=} Expected: {l:32 b:9zLwUwp//Wxn/3dHYBdLjgE3fcEIWUIhWHDIUjXxHGE=}
2015-07-31 11:26:20, Info CSI 00000329 [SR] Cannot repair member file [l:34{17}]"ImagingEngine.dll" of Microsoft-Windows-ImagingEngine, Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
There are no apparent errors in the CheckSUR log - but we may need to revisit that later.

I'll post a fix protocol for this error a bit later.

http://www.sevenforums.com/windows-updates-activation/377142-windows-update-failed-error-800b0100.html
Relevancy 77.83%

Everytime i boot my laptop, windows update automatically download newest update and only this one is failed. Its almost 10 times i retry to redownload and install but always failed. There's no problem with my internet connection and my PC successfully install this update.
I used windows 10 pro edition i upgrade it from windows 7.
Here some screenshot might help
I need your guys help. Thanks ..

A:Windows update failed error 0x8020002b

​I am having problems too and just replying to this thread since I don't feel like starting a new one.

http://www.tenforums.com/windows-updates-activation/56712-windows-update-failed-error-0x8020002b.html
Relevancy 77.4%

i just installed google chrome from online installer and then i moved the file using application mover to the HDD.. then i pasted a symlink in "C:\Program Files (x86)\" ... "C:\" is the SSD where the windows and the drivers are installed.... when i turn on chrome everything works file.. but the updater doesn't work... when i try to update i get this:



can anyone help me get that fixed.. thanks!

A:Update failed (error: 3)An error occurred while checking for updates:

Just uninstall Chrome then install it directly to the destination you want it installed instead of moving it post installation.

http://www.sevenforums.com/general-discussion/346220-update-failed-error-3-error-occurred-while-checking-updates.html
Relevancy 77.4%

Has anyone seen this error before?

"The Group Policy Client service failed the sign-in.
The universal unique identifier (UUID) type is not supported."

I got the error when signing in with my normal non-Admin local account. I'd just updated to the latest set of patches from Microsoft, and apparently all had installed OK. I then logged in using my Admin-level account - again apparantly all OK - and shut down.

Then when I started the laptop again, I logged in with my non-Admin account and after I'd entered the password, it processed for longer than normal, and gave me this error (only option available ="OK") and took me out to the login screen.

However when I tried again it worked.

But I can't help wondering if something is still wrong...?

http://www.eightforums.com/user-accounts-family-safety/24139-error-group-policy-client-service-failed-sign.html
Relevancy 77.4%

The system log shows The Group Policy Client service failed to start due to the following error The service did not respond to the start or control request in a timely fashion That tells me nothing I can use the computer because Client error service failed Policy The to start Group I am the administrator I can access files programs etc from the task bar or the The Group Policy Client service failed to start error start menu but my desktop is blank I have no idea how to troubleshoot this What happened was I shut down the computer this morning because I kinda thought there were some windows updates yesterday Turned The Group Policy Client service failed to start error it on this afternoon and it booted The Group Policy Client service failed to start error fine but I got the error shown above It's been suggested in my searching that there are keys missing now from the registry regarding the Group Policy Editor because of the windows update This link says Vista but the gentleman who posted the info posted it in February quot I FOUND SOLUTION TO THIS PROBLEM The crash of your computer after Windows Updates most probably caused that It has nothing to do with Antivirus or anything else I had this issue on my laptop since November and it really bugged me I sifted through the event log and found the pattern of events that preceded the issue and probably caused it In short the pattern is as follows Windows updates run automatically as scheduled and when reboot is initiated after the updates are finished the computer crashes probably during reboot sequence When it boots up it reports that the last shutdown was unexpected and the issue begins to occur I spent days trying to dig out a solution from the Internet to no avail until I came across this page It doesn't say anything about this particular problem but it gives more information about SVCHOST process that starts many services including Group Policy Client It looks like during reboot a vital registry settings were lost during crash and Group Policy Client quot don't know quot how to start Let me explain There are two places to look in the registry HKEY LOCAL MACHINE SYSTEM CurrentControlSet Services this path should contain gpsvc key a folder which is responsible for service parameters and configuration I found that the key was intact so you do not touch anything here - just check that the key exists HKEY LOCAL MACHINE SOFTWARE Microsoft Windows NT CurrentVersion SVCHOST This is the most important path you should look into as it must contain the keys and values referred in the key Below are descriptions what must be present there There must be Multi-String value called GPSvcGroup My laptop was missing it So you should create multi-string value named GPSvcGroup and assign it value GPSvc Next you must create a key a folder and name it GPSvcGroup - this key normally should be there but again it was missin on my laptop Then open newly-created GPSvcGroup folder and create DWORD values First called AuthenticationCapabilities and you must give it a value of x or in decimal Second is called CoInitializeSecurityParam and it must have value of Once you complete all steps above reboot the computer and the problem will be fixed Video walkthrough for those who are not very technical is here quot Windows could not connect to Group Policy Client services quot how to fix Firewall failed load x d - YouTube I am so relieved I was able to fix it and hope this will help others with the similar issue quot Does that sound as though it's something worth pursuing

http://www.eightforums.com/general-support/56951-group-policy-client-service-failed-start-error.html
Relevancy 77.4%

Hoping someone can help me here. I have seen Noel DP post several resolutions but each seem custom to the errors the other user gets.

I ran SFC/Scannow with no errors. Ran Checksur and got errors.

Unavailable repair files:
servicing\packages\WUClient-SelfUpdate-Core-TopLevel~31bf3856ad364e35~x86~~7.6.7600.320.mum
servicing\packages\WUClient-SelfUpdate-Core-TopLevel~31bf3856ad364e35~x86~~7.6.7600.320.mum
servicing\packages\WUClient-SelfUpdate-Core-TopLevel~31bf3856ad364e35~x86~~7.6.7600.320.cat
servicing\packages\WUClient-SelfUpdate-Core-TopLevel~31bf3856ad364e35~x86~~7.6.7600.320.cat

CBS log and CheckSUR Log attached.

A:Windows Update failed error code: 800F0900

This sounds to me like you may have to try going in and deleting the windows update catalog files and re running windows update and see what happens. If that doesnt solve the issue post back and we can take it from there.

http://www.sevenforums.com/windows-updates-activation/349610-windows-update-failed-error-code-800f0900.html
Relevancy 77.4%

I've been getting the 9C59 error for a while with the Windows automatic updater. I've attempted a manual update of IE 10, but had the same error. Not sure where to go from here.

I've attached the CBS file.

Thanks.

Dennis

A:IE 10 Update Failed - Windows 7 - Error Code 9C59

CheckSUR found and fixed a large number of errors - but there are still a couple of errors remaining, which it may be able to fix if you run the tool a second time. Please post (just) the new CheckSUR.log file afterwards.

There are a couple of errors in the CBS.log which may relate to the errors outstanding in the CheckSUR - so we need to get those fixed first, and only then see if it's affected the SFC/CBS results.

http://www.sevenforums.com/windows-updates-activation/296411-ie-10-update-failed-windows-7-error-code-9c59.html
Relevancy 77.4%

Hello, My windows update keeps failing on the same 5 updates with the error code 8024200D , This is really annoying me, I have tried everything on the internet i could find and nothing has worked, Can anybody help?, Thank you,

Sean.

Windows 7 Professional 64bit:

Windows 7 Service Pack 1 for x64-based Systems (KB976932)

Update for Windows 7 for x64-based Systems (KB2763523)

Update for Windows 7 for x64-based Systems (KB2533552)

Security Update for Windows 7 for x64-based Systems (KB2864058)

Security Update for Windows 7 for x64-based Systems (KB2620704)

Relevancy 77.4%

Hello, I've been have several issues with my laptop ever since I swapped over my faulty C drive by Ghosting it onto another HDD. My troubleshooters all fail to run when I try to start them and Windows Update will not work despite the fact that I've checked and re-checked that the service is running. I've run sfc twice now with reboots in between and I've tried to repair install windows 7 using the tutorial provided by this forum, but I keep running into errors while trying to fix the problem.

I do not want to run a clean install unless I absolutely have to, but repairing it doesn't seem to work. I have the CBS log and the error codes from the troubleshooters if you need them.

A:Windows 7 repair install failed; error when trying to run Update

Start by running a couple of Startup Repairs to make sure the boot files are in order.

Post back a screenshot of Disk Management - Post a Screen Capture Image - Windows 7 Help Forums.

Did the clone hold activation after cloning? Check at Computer>Properties activation link.

If these are okay, then let's move to addressing the UPdates. Try each of these tutorials:
reset Windows Update components
System Update Readiness Tool fixes Windows Update errors in Windows 7, Windows Vista, Windows Server 2008 R2, and Windows Server 2008
Windows Update - Reset - Windows 7 Forums

Report back the results of each of these steps.

Is this the original Asus factory preinstall with the bloatware and duplicate utilities that have better versions built into Win7? If so this is a corrupt install to begin with that smothers Win7 native performance. So I'd stronglly consider doing the superior Clean Reinstall - Factory OEM Windows 7 as you'd go from one of the worst possible installs to one of the best. Once you've done it you can preserve a backup image so you never have to do it again.

http://www.sevenforums.com/installation-setup/288844-windows-7-repair-install-failed-error-when-trying-run-update.html
Relevancy 77.4%

I have been trying to update windows 7 for a few days now and i have been getting the same error message over and over again. I only have 1 important update left and like 10 optional updates. The important update is KB295664, and most of the optional ones are similar. I tried to repair network frame and nothing

A:Windows Failed to update,Error code 80070643

Please follow the Windows Update Posting Instructions and post the requested data

If the file is too large (8MB compressed), remove the older CBSPersist cab files until the final file is below the limit - you can always post them separately after zipping them. (the forum doesn't allow the upload of bare CAB files, for a number of reasons)

Please also post the C:\Windows\windowsudpate.log file

http://www.sevenforums.com/windows-updates-activation/377744-windows-failed-update-error-code-80070643-a.html
Relevancy 77.4%

Hello The windows update keeps offering me the same update KB over and over again even after I reboot The installing information says it failed every time I try and after the attempt to install it says quot Not needed quot Code Update for Windows for x -based Systems KB Installation date Installation status Failed Error details Code Update type Important Install this update to resolve issues in Windows For a complete listing of the issues that are included in 0x80073712 /error KB2887595 Failed Windows Update: this update see the associated Microsoft Knowledge Base article for more information After you install this item you may have to restart your computer More information http support microsoft com kb Help and Support http support microsoft com If that doesn't happend I receive an error after trying to installed still with Windows Update Here is the details for that failed attempt Code Update for Windows for x -based Systems KB Installation date Installation status Failed Error details Code Update type Important Install this update to resolve issues in Windows For a complete listing of Windows Update: Failed KB2887595 /error 0x80073712 the issues that are included in this update see the associated Microsoft Knowledge Base article for more information After you install this item you may have to restart your computer More information Windows Update: Failed KB2887595 /error 0x80073712 http support microsoft com kb Help and Support http support microsoft com Please help me I have not yet installed it manually

A:Windows Update: Failed KB2887595 /error 0x80073712

Fixed after a using restore point previous to the first attempt install

http://www.eightforums.com/windows-updates-activation/57195-windows-update-failed-kb2887595-error-0x80073712.html
Relevancy 77.4%

I'm trying to install update KB2639308 but it keeps saying that it fails and gives me the error code WindowsUpdate_FFFFFFFE. I looked it up online and it says that it can't update because of malware. However, when I run Norton and do a full system scan it doesn't find anything. I also tried to fix it with the Windows Update Troubleshooter and that doesn't help either. Is there anything else I can do without having to fully reinstall Windows 7 like the info on the site says? Please help.

A:Failed Windows Update, error code WindowsUpdate_FFFFFFFE

Hi,

A pre-requisite for this update is having Service Pack 1 installed. Can you confirm that this is the case?

Also, which version of Norton are you running? Is it the very latest? I have found posts where running Microsoft's own MSE doesn't find any malware, yet the error this occurs, so lets try something totally different:

Please perform an online virus scan using ESET
ESET Online Scanner

Can you also please run this tool to allow us to diagnose any other conditions that might prevent this update installing:

http://go.microsoft.com/fwlink/?linkid=52012

1. Click the Continue button.
2. Click Copy button (ignore any error messages if they appear)
3. Paste the results here in your next reply

Regards,
Golden

http://www.sevenforums.com/windows-updates-activation/220812-failed-windows-update-error-code-windowsupdate_fffffffe.html
Relevancy 77.4%

hi ..., i need help regarding the windows update issue.
i'm using windows vista business sp2 running on lenovo thinkpad sl300.
i want to upgrade my harddrive since i need a bigger capacity. so, i try to move my data on old harddrive to a new one.
i'm already try to migrate my harddrive several ways:
1. i try to clone my harddrive with sector by sector copy
2. i try to use rescue and recovery (utilities from thinkvantage)
3. i try to use backup and restore center (windows complete pc backup)
all of them give me the result, everything works just fine, except i no longer can run windows update and all related to it, for example microsoft security essentials.
i already try to fix the windows update with microsoft fix it
http://support.microsoft.com/kb/971058/en-us with normal and  aggresive mode, none of them works.
can anyone help me on this?Regards, Ferry Huang

A:Windows Update Failed Error Code 0xc8000247

but when i register the dll, there are some error saying the dll is missing or not valid (something like that),
maybe some DLLs are damaged.

Please start the command prompt (cmd.exe) with admin rights [1] and run sfc [2]:

sfc.exe /scannow

Is it able to find and repair broken files (create the txt file shown under [2] and look if all files are restored)?


best regards
André

[1]
http://windows.microsoft.com/en-US/windows7/How-do-I-run-an-application-once-with-a-full-administrator-access-token

[2]
http://support.microsoft.com/kb/929833 "A programmer is just a tool which converts caffeine into code"

Want to install RSAT on Windows 7 Sp1? Check my HowTo: http://www.msfn.org/board/index.php?showtopic=150221

https://social.technet.microsoft.com/Forums/en-US/54066ae6-d318-4c09-96a0-316e573c9c37/windows-update-failed-error-code-0xc8000247?forum=itprovistamigration
Relevancy 77.4%

I recently did a factory restore to get rid of some malware and now for some reason updates aren't going through properly.
Everytime i shut down my computer i have 85 updates and they all fail except two.
But the error code is Code 80071A2D

Almost all the updates are Security updates.

A:Windows Failed update Error code 80071A2D

Please follow the Windows Update Posting Instructions and post the requested data
If the file is too large (8MB compressed), remove the older CBSPersist cab files until the final file is below the limit - you can always post them separately after zipping them. (the forum doesn't allow the upload of bare CBA files, for a number of reasons)

http://www.sevenforums.com/windows-updates-activation/332754-windows-failed-update-error-code-80071a2d.html
Relevancy 77.4%

Hi,

I have encountered error code 800F0900 with the recent Windows Update process. The followings are my screen shots and CBS logs for your perusal.

Thanks for taking time to solve my problem.

Regards.
STLai

A:Windows Update failed error code: 800F0900

Please follow the Windows Update Posting Instructions and post the requested data
If the file is too large (8MB compressed), remove the older CBSPersist cab files until the final file is below the limit - you can always post them separately after zipping them. (the forum doesn't allow the upload of bare CAB files, for a number of reasons)

http://www.sevenforums.com/windows-updates-activation/346084-windows-update-failed-error-code-800f0900.html
Relevancy 77.4%

hello about a month I have a problem - code 8000ffff Update error Windows failed with the updates of windows professional bit When I turn on the PC Windows tries to install an Windows Update failed - code error 8000ffff update it hangs at and the pc restarts times before using it after if I click on search updates I have error code ffff I tried microsoft fixit but I Windows Update failed - code error 8000ffff have not resolved this is the file of MGA please help me I'm going crazy Code Diagnostic Report ----------------------------------------- Windows Validation Data-- gt Validation Code Cached Online Validation Code x Windows Product Key - - - -XFPHJ Windows Product Key Hash FjeWkdSWrMt bkVKGJPOMAaHKUo Windows Product ID - - - Windows Product ID Type Windows License Type Volume MAK Windows OS version ID B A - F- E - C -F F FBD Is Admin Yes TestCab x LegitcheckControl ActiveX N A hr x Signed By N A hr x Product Name Windows Professional Architecture x Build lab win sp gdr - TTS Error Validation Diagnostic Resolution Status N A Vista WgaER Data-- gt ThreatID s N A hr x Version N A hr x Windows XP Notifications Data-- gt Cached Result N A hr x File Exists No Version N A hr x WgaTray exe Signed By N A hr x WgaLogon dll Signed By N A hr x OGA Notifications Data-- gt Cached Result N A hr x Version N A hr x OGAExec exe Signed By N A hr x OGAAddin dll Signed By N A hr x OGA Data-- gt Office Status Blocked VLK Microsoft Office Enterprise - Blocked VLK OGA Version N A x Signed By N A hr x Office Diagnostics D FF - - D FF - - D FF - - D FF - - D FF - - D FF - - D FF - - D FF - - Browser Data-- gt Proxy settings N A User Agent Mozilla compatible MSIE Win Default Browser C Users UnoCheScassa AppData Local Google Chrome Application chrome exe Download signed ActiveX controls Prompt Download unsigned ActiveX controls Disabled Run ActiveX controls and plug-ins Allowed Initialize and script ActiveX controls not marked as safe Disabled Allow scripting of Internet Explorer Webbrowser control Disabled Active scripting Allowed Script ActiveX controls marked as safe for scripting Allowed File Scan Data-- gt Other data-- gt Office Details lt GenuineResults gt lt MachineData gt lt UGUID gt B A - F- E - C -F F FBD lt UGUID gt lt Version gt lt Version gt lt OS gt lt OS gt lt Architecture gt x lt Architecture gt lt PKey gt - - - -BBBBB lt PKey gt lt PID gt - - - lt PID gt lt PIDType gt lt PIDType gt lt SID gt S- - - - - - lt SID gt lt SYSTEM gt lt Manufacturer gt Acer lt Manufacturer gt lt Model gt Aspire lt Model gt lt SYSTEM gt lt BIOS gt lt Manufacturer gt Phoenix Technologies LTD lt Manufacturer gt lt Version gt V lt Version gt lt SMBIOSVersion major quot quot minor quot quot gt lt Date gt lt Date gt lt BIOS gt lt HWID gt DA FA lt HWID gt lt UserLCID gt lt UserLCID gt lt SystemLCID gt lt SystemLCID gt lt TimeZone gt W Europe Standard Time GMT lt TimeZone gt lt iJoin gt lt iJoin gt lt SBID gt lt stat gt lt stat gt lt msppid gt lt msppid gt lt name gt lt name gt lt model gt lt model gt lt SBID gt lt OEM gt lt OEMID gt ACRSYS lt OEMID gt lt OEMTableID gt ACRPRDCT lt OEMTableID gt lt OEM gt lt GANotification gt lt MachineData gt lt Software gt lt Office gt lt Result gt lt Result gt lt Products gt lt Product GUID quot - - - - FF CE quot gt lt LegitResult gt lt LegitResult gt lt Name gt Microsoft Office Enterprise lt Name gt lt Ver gt lt Ver gt lt Val gt ACD E lt Val gt lt Hash gt fFic JgCreGGRxyF uMWB R Jcg lt Hash gt lt Pid gt - - - lt Pid gt lt PidType gt lt PidType gt lt Product gt lt Products gt lt Applications gt lt App Id quot quot Version quot quot Result quot quot gt lt App Id quot quot Version quot quot Result quot quot gt lt App Id quot quot Version quot quot Result quot quot gt lt App Id quot quot Version quot quot Result quot quot gt lt App Id quot A quot Version quot quot Result quot quot gt lt App Id quot B quot Version quot quot Result quot quot gt lt App Id quot quot Version quot quot Result quot quot gt lt App Id quot A quot Version qu... Read more

A:Windows Update failed - code error 8000ffff

Open Regedit, - File - Export - save to desktop ( creates backup of your current registery

Then locate and remove:

HKEY_LOCAL_MACHINE\COMPONENTS\PendingXmlIdentifier
HKEY_LOCAL_MACHINE\COMPONENTS\NextQueueEntryIndex
HKEY_LOCAL_MACHINE\COMPONENTS\AdvancedInstallersNeedResolving
Reboot - then check for updates.

Source - Microsoft.

http://www.sevenforums.com/windows-updates-activation/276122-windows-update-failed-code-error-8000ffff.html
Relevancy 77.4%

When trying to run windows update, I come up with an error number 0x80070424. I have tried to find help with this issue on the website but no luck. Anyone have any suggestions??? Thanks in advance.
 

A:WIndows update failed Error number 0x80070424

Have you been here:http://support.microsoft.com/default.aspx?scid=kb;en-us;830086
 

https://forums.techguy.org/threads/windows-update-failed-error-number-0x80070424.293692/
Relevancy 77.4%

hi

please could you advise on how to resolve the following

windows update error 80070490 (see cap)
kb2904266

w7 x64 sp1 home premium
acer 5742z 4gb 500gb
ie8
(not installed ie9,10 or 11 nor bing desktop)

SUR tool run
sfc /scannow stops at 12% see cap attached (see attached log)


machine appears to run ok
comodo av and firewall
malwarebytes anti exploit

malware bytes also ran no nasties found....

Thanks
jeremy

A:Failed Windows Update, error 80070490 re kb2904266

check out this link that hopefully may help ya out: December 2013 cumulative time zone update for Windows operating systems

http://www.sevenforums.com/windows-updates-activation/314823-failed-windows-update-error-80070490-re-kb2904266.html
Relevancy 76.54%

For the sake of completeness I m going to give the full history here We have a computer running Windows Vista Home Premium This is on a home network no domain The other morning following a Windows Update and restart when the user tried to login she received the message quot User Profile Service service failed the logon User profile to please Group service policy - help! error Solved: client failed start cannot be loaded quot We followed online Solved: Group policy client service failed to start error - please help! advice to log in with an administrator account and change setting in the registry for the Profile resetting some values to We also followed instructions to delete the ntuser dat file however we could not locate a file that was just ntuser Solved: Group policy client service failed to start error - please help! dat they also had long series of numbers after them apparently indicating that they are temporary files After several tries at fixing this she now gets a different error when she tries to log on quot group policy client service failed to start quot She can log onto the account in Safe mode and I can log on to her computer using her account from my computer on the same home network without any problems We have tried copying the user directory to a new profile except for the ntuser dat files as suggested on Windows help This took a good - hours to copy and the new profile seems to be severely hosed none of her setting have been carried over webshots will not run Firefox keeps asking if she wants to set it as the default browser even after she tells it yes each time and she can t access the User Accounts settings from the new profile It s almost like it doesn t really have administrator permissions even though the Accounts and Users control panel shows that it does We know that two other things were going on when the Windows update that caused the restart occurred iTunes was conducting a large download and Symantec was running a scheduled security scan The security scan was showing as still running but was making no progress After checking a few Symantec forums we managed to cancel the process and uninstall Symantec which may be the only way to stop the scan Apparently active Symantec scans are known to cause profile login errors However this did not fix the problem When we log on to her profile in safe mode and look at the advanced user account settings the list of profiles includes two profiles with her original user name The basic list of user accounts only shows one I have no idea what this means Her profile now does have an ntuser dat file However we can t copy or delete it - it s in use by the system We also can t restore an earlier version of the ntuser dat file - apparently it doesn t get backed up in the archive probably for the same reason we can t delete or copy it We tried doing a system restore from the start of the day This was while it was still having the quot user profile service failed quot but before the quot group policy client service failed to start quot We have run sfc scannow It indicated that some files were corrupt but it could not repair them I couldn t figure out which files it thought were corrupt The Group Services Client is not running when I view it from the original profile in Safe Mode However I have no idea if it is supposed to be running in Safe Mode or not There is no way to start it all the options to start or stop are grayed out and unselectable The Group Services Client IS running when I check it with a different profile on the system Would really appreciate a fix for this or at least a way to create a new profile that carries over all her settings and doesn t result in a complete disaster nbsp

A:Solved: Group policy client service failed to start error - please help!

I think we've got this resolved. Unfortunately, there have been so many steps that I'm not sure which were neccessary. These includes:
* The instructions here: http://answers.microsoft.com/en-us/...gon-user/4ed66b21-c23e-42f1-98b2-706dcf931fae
(changing some registry entries for the profile)
* Uninstalling Symantec, which had an automatic scan that had been interrupted and was stuck not being able to complete or be cancelled.
* The final bit of fix that worked was (hope I'm getting this all right):
1) Clearing the registry entries as above.
2) Renaming the profile folder.
3) Restarting the computer and letting it create a new profile folder with the same name.
4) Copying the ntuser files from the newly created profile to the old profile.
5) Deleting the new profile and renaming the old profile back.
And now things seem to be working, though she had to run setup on some programs again.
 

https://forums.techguy.org/threads/solved-group-policy-client-service-failed-to-start-error-please-help.1050515/
Relevancy 76.54%

I am trying to install net framework and keep getting error HRESULT xc As a result I attempted to use running failed Windows Update not 0xc8000222, error Service with windows update and realized it Windows Update failed with error 0xc8000222, Service not running is failing It says the service is not running I tried installing Windows -KB -v -x and it also fails with error code xc I tried to start services using elevated command prompt and here are the results Microsoft Windows Version Copyright c Microsoft Corporation All rights reserved C Windows system gt net start bits The requested Windows Update failed with error 0xc8000222, Service not running service has already been started More help is available by typing NET HELPMSG C Windows system gt net start wuauserv The requested service has already been started More help is available by typing NET HELPMSG C Windows system gt NET START BFE The requested service has already been started More help is available by typing NET HELPMSG C Windows system gt NET START TRUSTEDINSTALLER The Windows Modules Installer service is starting The Windows Modules Installer service was started successfully Any help would be greatly appreciated

A:Windows Update failed with error 0xc8000222, Service not running

Please run a full CHKDSK and SFC scan....

Click on Start > All Programs > Accessories
Right-click on the Command Prompt entry
Select Run as Administrator and accept the UAC prompt - the Elevated Command Prompt window should pop up.

At the Command prompt, type

CHKDSK C: /R

and hit the Enter key.
You will be told that the drive is locked,
and the CHKDSK will run at he next boot - hit the Y key, press Enter, and then reboot.

The CHKDSK will take a few hours depending on the size of the drive, so be patient!

After the CHKDSK has run, Windows should boot normally (possibly after a second auto-reboot) -
then run the SFC.

SFC -System File Checker - Instructions
Click on Start > All Programs > Accessories
Right-click on the Command Prompt entry
Select Run as Administrator and accept the UAC prompt - the Elevated Command Prompt window should pop up.

At the Command prompt, type

SFC /SCANNOW

and hit the Enter key

Wait for the scan to finish - make a note of any error messages - and then reboot.
Copy the CBS.log file created (C:\Windows\Logs\CBS\CBS.log) to your desktop (you can't manipulate it directly) and then compress the copy and attach it to your reply

http://www.sevenforums.com/windows-updates-activation/275389-windows-update-failed-error-0xc8000222-service-not-running.html
Relevancy 76.54%

I've finally solved the problem preventing me from updating my Dell Inspiron laptop from Windows Home to Windows as described in quot Something Happened quot What Next The installation was consistently failing at the point where Windows is about to restart for the first time with a grey information window titled quot Something has happened quot with the information quot Windows installation has failed quot I've posted below how to diagnose and repair your PC to enable the Windows installation to proceed The installation should proceed smoothly once the Failed 10 Installation 0x80004005 Error Update for Solution Windows error is corrected Symptoms You are booting in UEFI mode i e you have a separate EFI System Partition ESP on your system disk You are updating from Windows to Windows using the USB install disk a mounted ISO update image or Windows Update Solution for Failed Windows 10 Update Installation Error 0x80004005 The installation consistently fails at the point where Windows is about to restart for the first time with a grey information window titled quot Something Solution for Failed Windows 10 Update Installation Error 0x80004005 has happened quot with the information quot Windows installation has failed quot The setuperr log installation error logging file contains error x towards the end of the file and there is an error message referring to quot Failed to backup BCD database quot The command bcdedit export lt yourfilename gt fails with the error quot The store export operation has failed The handle is invalid quot Diagnosis The ESP partition has become corrupted causing the failure to export the boot configuration data and failure of the Windows installer Note your PC may boot to Windows normally despite the corruption The boot configuration data on the ESP partition needs to be repaired to enable the installation to proceed Solution The successful solution I implemented is shown below Perform a full backup of your Windows system I recommend Macrium Reflect Your PC may be unbootable if the repair is not implemented correctly Boot the computer using the Windows installation bootable DVD Make sure you boot the media in the same configuration as your UEFI installation On the Windows Setup wizard click on Next and click on Repair your computer You will then see a blue screen and an option to choose Click on Troubleshoot then click on Advanced Option and then click on Command Prompt Type these commands on the Command Prompt for UEFI configuration diskpart opens Disk Partitioning tool select disk or whichever disk is your system disk list volume please note the number of the volume that has no drive letter assigned and has FAT listed in the FS column usually the only FAT volume partition select volume x lt where x is the number of - MB FAT volume with no drive letter or with label ESP EFI or SYSTEM gt assign letter Z gives drive letter Z to EFI System Partition list volume to check drive letter Z is correctly assigned exit closes Disk Partitioning tool cd d Z EFI Microsoft Boot changes current folder in Command Prompt window attrib Z EFI Microsoft Boot BCD -h -r -s removes hidden read-only and system attributes from BCD folder bootrec fixboot writes a new boot sector to the system partition ren Z EFI Microsoft Boot BCD BCD old renames BCD folder to BCD old bcdboot c Windows l en-gb s b f ALL en-gb is for the UK - use your own locale Installation Checking Your boot configuration is probably correctly configured if the following commands report correctly Confirm the PC bootsRun bcdedit and confirm boot configuration is correct You can use bcdedit enum all for the full details Run reagentc info and check recovery configuration is correct In my case Windows RE was not configured and I had to run regaentc enable to enable it Run bcdedit export lt yourfilename gt and confirm the command worksMinitool Partition Wizard may be used to explore the EFI system partition and confirm the correct files have been copied Your Windows ins... Read more

http://www.tenforums.com/installation-setup/32684-solution-failed-windows-10-update-installation-error-0x80004005.html
Relevancy 76.54%

I have a HP mini 110-3000 and am trying to install the Windows 7 Service Pack 1 but every time I have tried to update, it comes up with error code 26. I have tried everything that I could think of and need assistance.

A:Windows 7 Service Pack failed to update, error code 26

Hello Krayola47, welcome to SevenForums!

Can you post the requested data please?

Windows Update Posting Instructions

Tom

http://www.sevenforums.com/windows-updates-activation/300678-windows-7-service-pack-failed-update-error-code-26-a.html
Relevancy 76.54%

Tried running windows update KB2545698 and it failed due to error code 800B0100. Please help!

A:Update for Windows 7 (KB2545698) failed due to error code 800B0100

Please follow the Windows Update Posting Instructions and post the requested data
If the file is too large (8MB compressed), remove the older CBSPersist cab files until the final file is below the limit - you can always post them separately after zipping them. (the forum doesn't allow the upload of bare CAB files, for a number of reasons)

http://www.sevenforums.com/windows-updates-activation/338121-update-windows-7-kb2545698-failed-due-error-code-800b0100.html
Relevancy 76.54%

Basically when I tried to do a windows update, it downloaded about 5 other updates and installed them, but 2 updates did not download. Instead of "Downloading [updatename]... complete!" it says it failed. I tried to download/install them again after a system restart (had to restart for the updates that DID install) but no luck. I tried disabling my firewall and antivirus and tried again, didn't do anything. The error code is 0x80070005, and it just says to install the update again (which I can't do...). Specifically, the updates are "Update for Windows XP (KB951072)" and "Security Update for Windows XP (KB950974)"

Is anyone else having this problem or have any idea what to do?

A:[SOLVED] Windows Update downloads failed (error 0x80070005)

how did you solve this?

http://www.techsupportforum.com/forums/f10/solved-windows-update-downloads-failed-error-0x80070005-280798.html
Relevancy 75.68%

Auto security update seems to have created error code C0000142 and saying unable to access (?) as well as volume on computer no longer works - now what folks?  Many thanks as always.

A:windows 7 home 64 bit dell PC update failed caused error code

Please download MiniToolBox  , save it to your desktop and run it.
 Checkmark the following checkboxes:  List last 10 Event Viewer log  List Installed Programs  List Users, Partitions and Memory size.
 Click Go and paste the content into your next post.
 Also...please Publish a Snapshot using Speccy - http://www.bleepingcomputer.com/forums/topic323892.html/page__p__1797792#entry1797792 , taking care to post the link of the snapshot in your next post. 
Louis

http://www.bleepingcomputer.com/forums/t/586384/windows-7-home-64-bit-dell-pc-update-failed-caused-error-code/
Relevancy 75.68%

Hi folks I have a HP Elitebook Folio p nbsp It came Failure: error Windows with failed 0x800F0922 install the Installation to following update with Windows and I installed it on my corporate domain nbsp I was trying to do Installation Failure: Windows failed to install the following update with error 0x800F0922 some Windows updates so nbsp I could upgrade it to Windows but it fails installing the updates whether or not I try to install them one at a time or all of them nbsp It has about updates it needs from security updates to a net framework update nbsp I run Symantec EP and disabled it checked for driver updates for things like display and networking and they are all up to date I'm at a loss as to what to do nbsp It gives this error in the event log for each file Event ID Installation Failure Windows failed to install the following update with error x F Security Update for Windows for x -based Systems KB This is the example for KB but it gives the same error for every one nbsp I've tried to auto fix for Windows update issues and it fixed a couple of the issues but not all of them and provides no other help I also deleted folders and files from the SoftwareDistribution folder as well to no avail nbsp Any ideas what I can do to get whatever updates it needs so I can fully patch it and upgrade it to Win Thanks for any help

https://social.technet.microsoft.com/Forums/en-US/7060c961-3b7c-42ba-ad84-008c357478d8/installation-failure-windows-failed-to-install-the-following-update-with-error-0x800f0922?forum=w8itprogeneral
Relevancy 75.68%

Hi when running windows update all the updates fail and give the error code 800706F7. I have retried 3 times all to the same result. i have searched for this error code and the only results i found was about removing a previous 2014 update but this was not on my computer. i have ran the System Update Readiness Tool which installed 1 update however i can still not download the other updates

A:windows update error code 800706F7 54 important updates failed

Tried again and am now also getting error codes 80246007 and 8007002

http://www.sevenforums.com/windows-updates-activation/371496-windows-update-error-code-800706f7-54-important-updates-failed.html
Relevancy 74.82%

Hello all This file error failed KB2836502 Multiple Update attempts, Windows 8024200D is my first post to this forum and Multiple failed Windows Update attempts, error 8024200D file KB2836502 I must say after perusing a few posts I'm excited to post my question Multiple failed Windows Update attempts, error 8024200D file KB2836502 It looks like this is a great Multiple failed Windows Update attempts, error 8024200D file KB2836502 community I recently reformatted my computer due to intermittent crashes during resource intensive application sessions The crashes have continued with decreased frequency and make me suspect my PSU However my computer crashed during one of the first lengthy rounds of update installations after the reformat and I suspect that crash may have damaged a Windows Update installation Since then I have always had an quot updates available quot prompt and the update fails each time it tries to run I think I have narrowed it down to a single update that is not correctly installing I think this poster was encountering the same issue but it seemed wise to follow the forum recommendation not not try solutions posted for others Per the forum guidelines here are the details of my problem Used SURT and got the attached SURT results Ran SFC and got the attached results Windows Update returns error code for file KB see attached The compressed CBS log folder was too larger to attach to the post You can get it here Any and all help is much appreciated Brock Attachment Attachment Attachment Attachment

A:Multiple failed Windows Update attempts, error 8024200D file KB2836502

Try installing the patch from the download here...
Download Update for Windows 7 for x64-based Systems (KB2836502) from Official Microsoft Download Centre

If it fails, please post the new CBS.log file, and also the C:\Windows\windowsupdate.log file

http://www.sevenforums.com/windows-updates-activation/320214-multiple-failed-windows-update-attempts-error-8024200d-file-kb2836502.html
Relevancy 74.82%

I followed the steps to install microsoft ATA. Unfortunately, im at stage where i downloaded ATA Gateway setup and extract the zip and ran as in administrative mode. I comes with error " Windows KB2919355 update is missing".



However i tried to install the KB2919355 (windows8.1-kb2919355-x64 707363KB), it comes up with error windows update standalone installer " the update is not applicable to your computer". I cannot seems to figure out the problem here.



Could anyone help please?

OS: windows server 2012 r2 stdType: VM x64-bitATA center was setup was seccessfully without any error. it has .NetFramework 2.0 & 3.5 installed as well.

Vinnie Grack IT Administrator/consultant, London,UK

https://social.technet.microsoft.com/Forums/en-US/b30a93f1-18a1-45b8-86a1-c4a37b6c3c6d/microsoft-ata-gateway-setup-failed-with-error-windows-kb2919355-update-is-missing?forum=mata
Relevancy 73.96%

At my wit's end Cannot find the Systems x64-based Error Windows 8000FFFF (KB971644) Platform for Vista Update Failed right Platform Update for Windows Vista x64-based Systems (KB971644) Failed Error 8000FFFF answer anywhere I had to use restore points to get Media Center TV Pack installed on SP It is working pretty well Windows update had lots of problems but finally got SP reloaded Now I'm looking to get Windows Live Family Safety installed but it requires Platform Update I read about how Platform Update for Windows Vista x64-based Systems (KB971644) Failed Error 8000FFFF this fails because of issues in Update but the quot fixes quot don't do any good I've tried using the FixIt I've tried installing standalone Update packages related and unrelated I've tried the manual fix that edits the registry I haven't seen any other suggestions besides start all over with a new install of Vista and try to do it all in sequence the right way the first time I'm not even sure what that would be anyway and I really don't want to start all over just to get a peripheral bit of software to work Anyone else find the quot magic key quot to this problem that is not sharing it out on the Internet

A:Platform Update for Windows Vista x64-based Systems (KB971644) Failed Error 8000FFFF

Here are the results of Windows Update Posting Instructions.

CBS.zip

I attempted to perform the update again and the same error is still there: Code 8000FFFF

http://www.vistax64.com/windows-updates/302778-platform-update-windows-vista-x64-based-systems-kb971644-failed-error-8000ffff.html
Relevancy 72.24%

Howdy Tech Guys I am having a problem here I try to update my Norton Antivirus and this message pops up I am not really sure what to do to fix this Any tips Common Client ccProxy Update The update was not completed The update process was unable to complete successfully Please click the Details button for more information Windows XP Service Pack Common Client ccProxy LiveUpdate was not able to Needed Common Error: Client Help ccProxy Update complete Common Client ccProxy Update Error: Help Needed this update Please contact Technical Support and provide all information displayed on this screen For contact information go to Help- gt Technical Support from your Symantec product The files below could not be updated by LiveUpdate ----------------------------------- File C Program Files Common Files Symantec Shared CCLOGIN DL Bytes v File C Program Files Common Files Symantec Shared CCPROXY EX Bytes v File C Program Files Common Files Symantec Shared CCPXYEVT DL Bytes v File C Program Files Common Files Symantec Shared DPHTML DL Bytes v File C Program Files Common Files Symantec Shared DPHTTP DL Bytes v File C Program Files Common Files Symantec Shared DPJS DL Bytes v File C Program Files Common Files Symantec Shared DPVBS DL Bytes v File C Program Files Common Files Symantec Shared PXYHTTP DL Bytes v File C Program Files Common Files Symantec Shared STRMFILT DL Bytes v File C Program Files Common Files Symantec Shared SYMICONV DL Bytes v Any help would be greatly apprechiated Eagle nbsp

A:Common Client ccProxy Update Error: Help Needed

If you contact Symantac,they will offer you several options. the final one is usually to uninstall and then reinstall. which is usually the easiest.
 

https://forums.techguy.org/threads/common-client-ccproxy-update-error-help-needed.358720/
Relevancy 72.24%

I'm running Windows Pro on my Dell laptop This laptop has update error.. System Checker install integrity Windows error..iTunes File error been in storage and hasn't been turned on in a year Originally all I wanted to do was use iTunes The problem It made me update it in order to use it but I got an error I un-installed it and tried downloading a fresh copy and I get the following error After some Googling I read that not having the latest Windows NET framework might be the problem Sounded reasonable so I fired up Windows Update but that gave me an error and wouldn't start checking for updates I managed to get it to check for updates but now when it starts the process I get the following I Windows update error.. System File Checker integrity error..iTunes install error Googled the error code E and tried a few things to try and fix it I downloaded the windowsupdatediagnostic diagcab found on Microsoft's site here http windows microsoft com en-us windows troubleshoot-problems-installing-updates TC windows- I tried resetting the Windows Update reset tool using MicrosoftFixit found here http go microsoft com linkid I download the system readiness tool found here https www microsoft com en-us download details aspx Windows update error.. System File Checker integrity error..iTunes install error id I tried a clean boot I tried renaming the Windows Update Softwaredistribution folder None of this worked I ran the System File Checker tool SFC exe and the results said I had bad files but I don't know how to fix them It generated a CBS log which is too large for me to post MB so I've uploaded to dropbox here https www dropbox com s upin te z lcx CBS log dl And a sfcdetails log which from what I understand is a easier-to-read version of the CBS log which I've attached in the following post It was also recommended that I run SFCfix from here http www sysnative com niemiro apps SFCFix exe At some point it asked me to insert the windows DVD if I had it which I didn't I'm trying to fix this laptop for a relative of mine and I don't think they have their original CDs I've attached the SFClog here SFCFix version by niemiro Start time - - Microsoft Windows Service Pack - amd Not using a script file AutoAnalysis CORRUPT C Windows winsxs amd microsoft-windows-servicingstack bf ad e none ce c de cb f smipi dll SUMMARY Some corruptions could not be fixed automatically Seek advice from helper or sysnative com CBS amp SFC total detected corruption count CBS amp SFC total unimportant corruption count CBS amp SFC total fixed corruption count SURT total detected corruption count SURT total unimportant corruption count SURT total fixed corruption count AutoAnalysis directive completed successfully Successfully processed all directives SFCFix version by niemiro has completed Currently storing datablocks Finish time - - ----------------------EOF---------------------- I appreciate any help you can offer All of this is just to fix iTunes and I don't even know if any of this will even fix the iTunes problem to begin with But I'd still like to try Thank you for your help SFC details log if you need that - - Info CSI SR Verifying x components - - Info CSI a SR Beginning Verify and Repair transaction - - Info CSI c SR Verify complete - - Info CSI d SR Verifying x components - - Info CSI e SR Beginning Verify and Repair transaction - - Info CSI SR Verify complete - - Info CSI SR Verifying x components - - Info CSI SR Beginning Verify and Repair transaction - - Info CSI SR Verify complete - - Info CSI SR Verifying x components - - Info CSI SR Beginning Verify and Repair transaction - - Info CSI SR Verify complete - - Info CSI SR Verifying x components - - Info CSI a SR Beginning Verify and Repair transaction - - Info CSI c SR Verify complete - - Info CSI d SR Verifying x components - - Info CSI e SR Beginning Verify and Repair transaction - - Info CSI SR Verify complete - - Info CSI SR Verifying x components - - Info CSI SR Beginning Verify and Repair transaction - ... Read more

A:Windows update error.. System File Checker integrity error..iTunes install error

Open the Command Prompt, copy and paste the commands below one at a time followed by pressing Enter after each command.
 
net stop wuauserv
 
rmdir /s %windir%\softwaredistribution\wuredir
 
net start wuauserv

http://www.bleepingcomputer.com/forums/t/576057/windows-update-error-system-file-checker-integrity-erroritunes-install-error/
Relevancy 71.38%

Hi I setup a HP Desktop - a last weekend with windows Setup restore point and installed client service ??? policy issue - error Update group various programs WLM and Openoffice On the Monday had a call - the PC reported a quot Windows could not connect to the Group Policy Client service group policy client service error - Update issue ??? This problem prevents standard users from logging on to the system quot message I remotely looked at a couple of things and decided a restore maybe in order or repair So Advised to Hold the Shift Key and Restart As the PC shut down - it mentioned Updating and so when the trouble shooting screen eventuality appeared - I decided just to continue to windows And the PC worked fine and has been used every day - upto yesterday when he got the same error message and symptoms So i decided to do the same restart Shift Key amp Restart Then Continue The PC restarted fine no error message - so the Shift Key restart fixes something I decided to look into the issue a bit further As updating had been mentioned last week i thought I would start there Indeed Windows update had failed and I noticed that the Windows defender had two entries for the th and also for yesterday The Update also had a button for a retry Which I did - and then the upgrade started to install I have allowed this to run and install - so all the issues maybe solved I had to enable restore - as this appears to be off by default and also re-associate OpenOffice with MSfiles as they went back to Office - which We had not installed Anyone have an idea what the cause of quot Windows could not connect to the Group Policy Client service This problem prevents standard users from logging on to the system quot Maybe - in case it re-appears I'm do not have access to the PC as it is at a friends house who lives a distance from me

http://www.techsupportforum.com/forums/f338/group-policy-client-service-error-update-issue-1072394.html
Relevancy 70.52%

Recently a Windows update arrived called Microsoft Security Essentials Client Update Package - KB Since then my computer started malfunctioning Whenever I try to install the update everything goes fine and then suddenly goes blank and the desktop returns but the Windows update screen had closed When I open Windows update it shows that the aforesaid update is not installed And when I try to open Microsoft Security Essentials shortcut on my desktop the machine is not able - Client Package Security KB2544035 Microsoft Update error Essentials to find it and asks to delete it I can t even open Microsoft Security Essentials manually from Program files Things return to normal on System Restore But the Microsoft Security Essentials appears potentially unprotected and asks for a full system scan But before the scan is complete Microsoft Security Essentials Client Update Package - KB2544035 error the Microsoft Security Essentials screen closes and the desktop returns once again And once again when I try to open Microsoft Security Essentials shortcut on my desktop the machine is not able to find it This problem has occurred twice already and I m very frustrated I tried to full system scan in Safe Mode and that has not helped Please help nbsp

A:Microsoft Security Essentials Client Update Package - KB2544035 error

https://forums.techguy.org/threads/microsoft-security-essentials-client-update-package-kb2544035-error.1009793/
Relevancy 70.52%

Hey guys Quick summary the installation of Norton SystemWorks froze on my comp when i was instaling it so i cancelled (Boot failed error of Error) Loading after Windows install SystemWorks it and pretty much forgot about it When i rebooted a few days later Windows wouldnt load I did some reading correct me if i'm wrong and i found out it was becasue of Norton GoBack i didnt even want it on my system in Windows Loading error after failed install of SystemWorks (Boot Error) teh first place Windows Loading error after failed install of SystemWorks (Boot Error) It alters your boot files and i'm guessing when it froze it was in the prosses of changing those files So far i've tried everthing I could and had Windows Loading error after failed install of SystemWorks (Boot Error) no luck fixing it I tried the NOrton fix A file that unInstalles go back from dos but it didnt work since the installation was not complete in the first place I tried plugging it onto another system as a Slave but it doesnt even show up Heres the big problem i ran into I cant seem to get in teh partitions on my HD View or enter there were of them on this HD Is there any proggy you guys would recomend to get into NSFT partitions from dos Also I tired this a prog off of bootdisk com called xpquik it's suppose to be for reseting boot records for boot errors and it came back with a missing file called hal dll I wanted to copy that file back into the dir but i cant seem to get into drive C SO If you guys know how i could get into the C partition and copy hal dll file from a floppy or RE-fresh the XP install i have with out formatting the C drive or if there is no other way format JUST the C drive and do a clean install Or if you know any other way or anyhting else i could try It's a big gig HD and theres stuff on it that I really need for school so I would really really prefer not formating the whole thing If anyhting is unclear pls let me know and i'll try to explain better if I can Thx for your time and help in advance D

A:Windows Loading error after failed install of SystemWorks (Boot Error)

http://www.michaelstevenstech.com/XPrepairinstall.htm

You should probably start off with the simple method of booting to the recovery console (see the above for instructions to enter the recovery console) and running the commands fixboot and fixmbr.
http://www.michaelstevenstech.com/r_c_cmds.htm

http://www.techsupportforum.com/forums/f10/windows-loading-error-after-failed-install-of-systemworks-boot-error-80947.html
Relevancy 70.52%

e:\$Mft windows -delayed write failed

error:disk read error - read fails, the system cannot find the file specified.
================
these are the error messages that come up when I run my external hdd. What is the possibility that it is caused by a virus called minesweeper. My anti virus can not detect it. Please help.

A:e:\$Mft windows -delayed write failed . error:disk read error

anyone please ?

http://www.techsupportforum.com/forums/f10/e-mft-windows-delayed-write-failed-error-disk-read-error-349872.html
Relevancy 70.52%

I get that error (wmi related i think), when i try to check the policies on this client.. its an XP sp2 machine, a member of a 2003 domain..

I've tried removing the workstation from the domain, then deleting its account.. then renaming the machine and rejoining, but nothing has gotten me around this error..

Does anyone know what else to look for..

EIther way, i'm pretty sure GPO's arent being applied properly on this machine (actually there is another machine having a similar error as well).. I think on that machine.. the window that pops up after hitting rsop.msc, was something like "not found".

Thanks

http://www.techsupportforum.com/forums/f10/initialization-failed-error-when-running-gpresult-or-rsop-msc-on-client-machine-192735.html
Relevancy 70.09%

I got an update notice for an MSE Client Package to update to MSE V4 (KB2691905).
The update failed on Win7-x64 leaving no AV installed.

I tried to download MSE and I get a "Page cannot be found" at
Microsoft Security Essentials - Free Antivirus for Windows

I did find this page can download MSE, but I'm not sure what it would download/install...
Anti-Malware, Virus, Spyware Protection | Microsoft Security Essentials

If anyone knows more about this, I'd appreciate any info.

I re-booted the PC in Win7-x86 for now, using Avast ...

Not sure if this post should also be in "Windows Updates and Activation" subforum.
I don't want to duplicate a post...

Thanks,
David

A:MSE Client Update Package - V4 failed

I got the update notice yesterday and used your first link. When I clicked the Free* download button it showed an upgrade dialog box and the upgrade went smoothly. It's possible that you may have remnants of the old version of MSE that are preventing the new version from installing. This Microsoft KB article may help.

How to manually uninstall Microsoft Security Essentials 2.0.1963 if you cannot uninstall it by using the Add or Remove Programs item

I'd use the Fix it button first and then try to reinstall MSE. Remove Avast first through Programs and Features and then run the official Avast uninstaller to remove any Avast remnants.

avast! Uninstall Utility | Download aswClear for avast! Removal

If the Fix it button doesn't let you reinstall MSE then I'd try the "Let me fix it myself" steps.

http://www.sevenforums.com/system-security/226405-mse-client-update-package-v4-failed.html
Relevancy 69.23%

I Update Flash Failed Error have a Pentium Failed Flash Update Error system I built Failed Flash Update Error about years ago The system has been stable and running smoothly until today There were a number of XP Security updates that needed to be installed so while I was working on a different PC I decided I had time to install these updates The update installation routine ran without problem until time to reboot I gave the okay to reboot and returned to my work on the second PC After several minutes I noticed that the screen was blank as if the PC had shut down I started to hit the start button but noticed that the power light was on After checking things out all cables plugged in etc I hit the start button The PC shut down and then restarted I got the intel boot screen heard a single beep from the motherboard and then nothing I repeated these steps twice with no change Finally I unplugged the PC waited seconds plugged it in and rebooted This time after the intel screen and beep I see text that says quot Flash Update Failed Press F to continue quot or something very similar I pressed F but nothing but a black screen with a horizontal cursor flashing in the upper left corner This sounds like a failed bios update except that I was not updating the bios There were no disks in any drive and I had not downloaded a bios update I also keep my PC reasonably secure running ZoneAlarm Symantec A V Corporate and WebRoot SpySweeper with fresh updates and recent scans So does anyone have any ideas here Does it sound like the bios is dead and with it the motherboard I can live with replacing the board and cpu if I have to but I would really like some ideas as to why this might have happened Thanks nbsp

Relevancy 69.23%

i have not so mutch to give more then i have problem patching all my games. it pop upp says Failed to update host, both for NeverWinter,SWTOR,Tera,Wow.

and what happen is that i run the game---> patch loading for (1sec)----->Close---> (window) with the error Failed to update host ----->(Klick OK) ---->>> same thing over again

i guess some thing happend when i flushed the DNS. would some one like to help me i would really be glad ! thx .

http://www.techsupportforum.com/forums/f217/error-failed-to-update-host-695816.html
Relevancy 69.23%

Hello,

I'm receiving an Error on Windows startup:





Registry update failed



When I click OK, it shows UserInitialisationDone error:





System\CurrentControlSet\Services\TBUPDDNT\Parameters



What does it all mean?

Thanks.

A:Registry update failed Error

Originally Posted by Irina


Hello,

I'm receiving an Error on Windows startup:





Registry update failed



When I click OK, it shows UserInitialisationDone error:





System\CurrentControlSet\Services\TBUPDDNT\Parameters



What does it all mean?

Thanks.



Hi Irina

I think that an entry is incomplete
Have you installed/uninstalled new software recently?
Try using CCleaner registry cleaner
If this fails a system restore might help

I hope this helps

Pooch

http://www.vistax64.com/windows-updates/197386-registry-update-failed-error.html
Relevancy 68.37%

anybody have any ideas?
have tried sfc /scannow
also the steps in this Windows Update Error 80246008 in Windows 7 - Fix
but to no avail, i still receive the error message

i have also used take ownership on the downloader file in programdata/microsoft/network
and was able to start bits service once i then re enabled windows update. it hung for awhile so i restarted and got the same error for bits, tried take ownership again, but still get the same error
screenshot included

A:Windows Updates Failed BITS failed to start error code 2147024894

Please follow the Windows Update Posting Instructions and post the requested data
If the file is too large (8MB compressed), remove the older CBSPersist cab files until the final file is below the limit - you can always post them separately after zipping them. (the forum doesn't allow the upload of bare CAB files, for a number of reasons)

Also...

Open Event Viewer
click on the Windows logs entry in the left pane to expand it.
Now click on the Application entry - wait while it loads.
Click on 'File' in the menu bar and select Save...
Save the file as Appevt.evtx
Repeat for the System log
then zip both, and upload them.

http://www.sevenforums.com/windows-updates-activation/334252-windows-updates-failed-bits-failed-start-error-code-2147024894-a.html
Relevancy 68.37%

This one has me boggled. I've searched high low looking for a solution to this issue without any success thus far. As the title of the thread say, I've been unable to install SP1.

Link to my CBS directory (zipped): https://skydrive.live.com/redir?resi...6E21F538FA!107

SFC /SCANNOW reported no errors.

Let me know if you need anything else and thanks for the help.

The error message says, "Windows Update encountered an unknown error"

A:Win 7 x64 SP1 Update Failed, Error Code 80070002

There's no sign in your CBS.log file that SFC actually ran.
an 0x80070002 error is actually a 'File not found' error, and often means that a registry entry is pointed in the wrong direction, rather than that a file is missing.

Is your machine showing any other signs of problems?

http://www.sevenforums.com/windows-updates-activation/269020-win-7-x64-sp1-update-failed-error-code-80070002-a.html
Relevancy 68.37%

Hi

I started up my computer yesterday and got a blue screen which sayed "Failure configuring Windows updates. Reverting changes. Do not turn off your computer". I decided to reinstall windows 8.1 from disk and then update to windows 10 but I am now getting the RegSvr32 error box every time I start the computer. After a while I will also get the BAD_POOL_HEADER blue screen.

Any help would be great and I will certainly donate if the problem can be fixed. Thanks
 

Relevancy 68.37%

Hi

I started up my computer yesterday and got a blue screen which sayed "Failure configuring Windows updates. Reverting changes. Do not turn off your computer". I decided to reinstall windows 8.1 from disk but I am now getting the RegSvr32 error box every time I start the computer. After a while I will also get the BAD_POOL_HEADER blue screen.

Any help would be great and I will certainly donate if the problem can be fixed. Thanks
 

A:RegSvr32 error and BAD_POOL_HEADER after failed update

not malware related so moved to W8
 

https://forums.techguy.org/threads/regsvr32-error-and-bad_pool_header-after-failed-update.1162093/
Relevancy 68.37%

Hello, I am having a small issue with Windows update. Windows 7 Home Premium, 64BIT OEM on HP Pavilion.

Window Update failing error code 800736B3

I have followed the SFC, update readiness, and clean boot procedures listed in the thread I linked above. I believe I have a SIMILAR issue (not the same).

Can anyone give me a light in the proper direction?

SFC found nothing, readiness tool ran and installed hotfix but did not fix issue. I also tried to install updates 1 at a time, to not avail, as well as the clean boot.

Based on my checksur log, I have the following:

Checking Package Watchlist
(f) CBS Watchlist Package Missing 0x80070002 Microsoft-Windows-Embedded-SKU-Foundation-Package~31bf3856ad364e35~amd64~~0.0.0.0 Microsoft-Windows-InternetExplorer-Package~31bf3856ad364e35~amd64~~10.2.9200.16521 Package registry presence failed, possibly an orphaned package on package watchlist

But I am unsure where to go or how to continue at this point. Any sugegstions?

http://www.sevenforums.com/windows-updates-activation/381411-update-error-800736b3-updates-failed.html
Relevancy 68.37%

I am having a problem when I google Most times a page comes up that says file has been moved to - If I click back it goes to the page I was expecting to go to I try to update my AVG but gets most of way through and comes up quot Update failed General error quot Please can anyone error failed general message. AVG - Update help Logfile AVG Update failed - general error message. of Trend Micro HijackThis v Scan saved at on Platform Windows XP AVG Update failed - general error message. SP WinNT MSIE Internet Explorer v Boot mode Normal Running processes C WINDOWS System smss exe C PROGRA AVG AVG avgchsvx exe C WINDOWS system winlogon exe C WINDOWS AVG Update failed - general error message. system services exe C WINDOWS system lsass exe C WINDOWS system svchost exe C WINDOWS System svchost exe C WINDOWS system svchost exe C Program Files Lavasoft Ad-Aware AAWService exe C WINDOWS Explorer EXE C WINDOWS system spoolsv exe C Program Files Common Files LogiShrd LVMVFM LVPrcSrv exe C Program Files AVG AVG avgwdsvc exe C Program Files Common Files LogiShrd LComMgr Communications Helper exe C Program Files Common Files Java Java Update jusched exe C Program Files AVG AVG avgtray exe C Program Files Java jre bin jqs exe C Program Files Common Files Nokia MPlatform NokiaMServer exe C Program Files Logitech QuickCam Quickcam exe C WINDOWS system rundll exe C WINDOWS system ctfmon exe C Program Files Microsoft ActiveSync wcescomm exe C Program Files Skype Phone Skype exe C Program Files Messenger msmsgs exe C Program Files Common Files LogiShrd LVCOMSER LVComSer exe C PROGRA MI AA rapimgr exe C Program Files Common Files Microsoft Shared VS Debug mdm exe C WINDOWS system nvsvc exe C WINDOWS system PnkBstrA exe C WINDOWS System svchost exe C Program Files Common Files Microsoft Shared Windows Live WLIDSVC EXE C Program Files AVG AVG Identity Protection agent bin avgidsmonitor exe C Program Files AVG AVG avgnsx exe C Program Files AVG AVG Identity Protection Agent Bin AVGIDSAgent exe C Program Files Skype Plugin Manager skypePM exe C Program Files Common Files Microsoft Shared Windows Live WLIDSvcM exe C Program Files Common Files Logishrd LQCVFX COCIManager exe C Program Files PC Connectivity Solution ServiceLayer exe C Program Files Common Files LogiShrd LVCOMSER LVComSer exe C Program Files PC Connectivity Solution Transports NclUSBSrv exe C Program Files PC Connectivity Solution Transports NclRSSrv exe C WINDOWS system wuauclt exe C Program Files AVG AVG avgui exe C Program Files Lavasoft Ad-Aware AAWTray exe C PROGRA AVG AVG avgrsx exe C Program Files AVG AVG avgcsrvx exe C Program Files Mozilla Firefox firefox exe C Program Files Mozilla Firefox plugin-container exe C WINDOWS System msiexec exe C Documents and Settings Blackburn My Documents Downloads HijackThis exe R - HKCU Software Microsoft Internet Explorer Main Search Page http go microsoft com fwlink LinkId R - HKCU Software Microsoft Internet Explorer Main Start Page http go microsoft com fwlink LinkId R - HKLM Software Microsoft Internet Explorer Main Default Page URL http go microsoft com fwlink LinkId R - HKLM Software Microsoft Internet Explorer Main Default Search URL http go microsoft com fwlink LinkId R - HKLM Software Microsoft Internet Explorer Main Search Page http go microsoft com fwlink LinkId R - HKLM Software Microsoft Internet Explorer Main Start Page http go microsoft com fwlink LinkId O - BHO AcroIEHelperStub - DF C-E AD- -A -FA C EBDC - C Program Files Common Files Adobe Acrobat ActiveX AcroIEHelperShim dll O - BHO WormRadar com IESiteBlocker NavFilter - CA F - F E- B -A E- E E C C - C Program Files AVG AVG avgssie dll O - BHO Windows Live ID Sign-in Helper - D - C - ABF- ECC- C - C Program Files Common Files Microsoft Shared Windows Live WindowsLiveLogin dll O - BHO SkypeIEPluginBHO - AE - E C- ED - F B-F F A - C Program Files Skype Toolbars Internet Explorer skypeieplugin dll O - BHO Java tm Plug-In SSV Helper - DBC -A - b-BC - C C C A - C Program Files Java jr... Read more

https://forums.techguy.org/threads/avg-update-failed-general-error-message.989903/
Relevancy 68.37%

HI all,

Just registered after seeing a similar thread on here to the issue I have.

I have a laptop with 7 Home premium 64 bit SP1 that is up to date with the exception of an IE9 update that refuses to install at all.

Have tried various different methods but to no avail including attempting to remove IE9 and then try a reinstall.

Uninstall hasn't been possible. Any help would be much appreciated.

Attachment 256916

Attachment 256917

A:Win7 64 Update failed Error 9C48

Hello adz76 and welcome to the forums

I've never seen a 9C48 error code from these problems before! Thank you for all of the logs, they are very helpful.

Windows Update Package Replacement

Warning: this fix is specific to the user in this thread. No one else should follow these instructions as it may cause more harm than good. If you are after assistance, please start a thread of your own.

Please download the attached file, Packs.zip and save this to your Desktop.
Right-click on the file and select Extract All...
Tick the box labelled Show extracted files when complete then click Extract
A window will open showing two folders, Manifests and Packages
Open the Manifests folder and copy the files into the following folder (if there are any files)

C:\Windows\Temp\CheckSur\Winsxs\Manifests

Open the Packages folder and copy the files into the following folder (if there are any files)

C:\Windows\Temp\CheckSur\Servicing\Packages

Run the System Update Readiness Tool (SURT) again
When the SURT finishes installing, copy (Ctrl + C) and paste (Ctrl + V) the contents of the SURT log into your next post please:

C:\Windows\Logs\CBS\CheckSUR.persist.log
You will probably be shown the error code 0x8024200D after performing this fix, if so, please download and install the update from this link. It must be downloaded using Internet Explorer.

Download Cumulative Security Update for Internet Explorer 9 in Windows 7 x64 Edition (KB2675157) from Official Microsoft Download Center

If you aren't shown an 8024200D, please let me know - it isn't an issue, I would just like to know for future reference.

Tom

http://www.sevenforums.com/windows-updates-activation/279973-win7-64-update-failed-error-9c48.html
Relevancy 68.37%

Hello everyone First I'm new in here and not Failed with more) to error KB2667402 (and two update codes an native speaker so please don't beat me if not everything Failed to update KB2667402 (and more) with two error codes is correct P Failed to update KB2667402 (and more) with two error codes Just correct me thank you About my problem Sadly the list was too long Failed to update KB2667402 (and more) with two error codes for the title so here is the list KBs KB KB KB KB KB KB KB Error codes Code B Code D as far as I know it could mean my PC shut off during an update Here some background infromations Two months ago someone destroyed my PC since the beginning of august I'm finally able to build my new desktop PC In this process I tried to reuse my old HDDs bothe WD Green TBs both work fine which was succesfull Shouldn't be to important but just to be safe In the process of preparing windows Professional x I had some driver problems motherboard because I tried to use my old boot drive in the end I newly installed Win on my SSD and it worked Right now only the old boot drive isn't whiped But so far I hadn't any problems because of that Afterwards I started updating As far as I know the PC had once or twice a problem while updating I think it shut off At least once - I tried to reach the fan control of my pc-case and missed the right button wasn't used to the new case In about this time the problems with the updating started I think it was before I could do my first backup sadly But I still think there is a solution even though it's hard My trials so far error code D and security update KB - Microsoft Community Quote Irma Select Start Control Panel Programs and Features View Installed Updates Locate KB in the list and remove it Restart your computer and download and install the KB again - Gerry C J Cornell Secure boot and then updating microsoft quot fix it quot Windows safe mode and then updating I think maybe this was just point and I am mixing up not totally sure C Windows System catroot name change to catroot old and C Windows SoftwareDistribution name change to SoftwareDistribution old in safe mode restart and then try updating Downloading the update manually and install it just tried it KB and KB For example Download Security Update for Windows for x -based Systems KB from Official Microsoft Download Center I think once it told me it worked but in fact it wasn't the case Edit Tried it again told me it worked But you know the drill haha Sevenforums to do list Windows Update Posting Instructions System Update Readiness Tool completed sfc scannow completed Here also a part from CheckSur txt CBS as dropbox link at the end Quote Summary Seconds executed Found errors CSI Manifest All Zeros Total count CBS MUM Corrupt Total count CBS Catalog Corrupt Total count Unavailable repair files winsxs manifests amd microsoft-windows-winsock-core bf ad e none c manifest winsxs manifests amd microsoft-windows-winsock-core bf ad e none a a e d manifest servicing packages Package for KB bf ad e amd mum servicing packages Package for KB bf ad e amd mum servicing packages Package for KB SP bf ad e amd mum servicing packages Package for KB SP bf ad e amd mum servicing packages Package for KB bf ad e amd mum servicing packages Package for KB bf ad e amd mum servicing packages Package for KB bf ad e amd cat servicing packages Package for KB bf ad e amd cat servicing packages Package for KB SP bf ad e amd cat servicing packages Package for KB SP bf ad e amd cat servicing packages Package for KB bf ad e amd cat servicing packages Package for KB bf ad e amd cat I hope my informations were usefull If not or you need more just ask I also can send a DxDiag if you want so and can tell me if there are personal informations which I should delete first haha Thanks a lot for your help and patience Sincerely MisterBroda P S I think tonymaloney Update KB failed error code B has had a similar problem P P S Probably nothing important but I tried to start Sniper Eli... Read more

A:Failed to update KB2667402 (and more) with two error codes

I've uploaded a file - mbaaa.zip - to my OneDrive at Noel's OneDrive
Please download and save it.
Right-click on the downloaded file, and select Extract all…
Extract to the default location - which will create a new folder mbaaa in the same place.
Open this folder - there should be two folders inside it (Manifests and Packages)

Copy the content of the Packages folder to the folder
C:\Windows\Temp\CheckSur\Servicing\Packages

And the content of the manifests folder (.manifest files) into this folder:

C:\Windows\Temp\CheckSur\Winsxs\Manifests

Now run the CheckSUR tool again (it may take a while)

Post the new CheckSUR.log file, and the CheckSUR.persist.log file.

http://www.sevenforums.com/windows-updates-activation/340907-failed-update-kb2667402-more-two-error-codes.html
Relevancy 68.37%

Hello all I've been having a similar problem to what has been addressed here already and I Update IE10 9C48 - Error Failed was hoping that I could get some help I am IE10 Update Failed - Error 9C48 running IE on Windows Home Premium bit and haven't really been having any IE10 Update Failed - Error 9C48 problems except that Windows keeps trying to update to IE and when I let the update run it fails with error code C I think the update keeps coming back because in Windows Features it only shows IE and in the installed updates it only shows IE IE10 Update Failed - Error 9C48 I've tried uninstalling IE but there is nowhere to execute an uninstall command no version of IE shows up in the Remove Programs menu in Control Panel I would like for the auto update to go away because these three features are synched auto update windows features and installed updates rather than hiding the update and running the IE Update Blocker I have attached the CBS log and a screenshot of the error Thank you in advance Attachment Attachment Attachment Attachment

A:IE10 Update Failed - Error 9C48

Both CheckSUR and SFC are free of problems - so we'll have to look elsewhere.

It may be a case of attempting to rip IE10 out by the roots...
command line uninstall IE10 on W7 may help with that.

Please post the C:\Windows\windowsupdate.log file and all IE*.log files

http://www.sevenforums.com/windows-updates-activation/319452-ie10-update-failed-error-9c48.html
Relevancy 68.37%

im trying to upgrade my bios as i have discovered it's not update since 2012 but evey time i try to update it it returns that error, and the reason i want to update is that i thought mybe that would fix the fact that i dont the secure boot option in my bios nor an uefi option so i thought that updating to 2.18 version  might fix that but even if thats not possible/wont be fixed with the update i still want to update my bios.addtional info:  *my pc is acer aspire v5-271G; running windows 10 (not preloaded into it i just installed last week). **also if it's releavant my pc was also NOT preloaded with windows 8 when i bought it i just thought that might be useful.any help is much appreciated  

http://community.acer.com/t5/V-and-VN-Series-Laptops/cant-update-bios-error-235-OEM-check-failed-from-bios-service/td-p/431798/jump-to/first-unread-message
Relevancy 68.37%

I have had SP fail every single time Update failed SP1 800B0100 Consecutive error since we got this damn laptop It's now affecting the rest of the computer making updates pile up behind it I've been unable to update anything successfully Consecutive failed SP1 Update error 800B0100 since and Consecutive failed SP1 Update error 800B0100 that was Security update for C Besides running around the forums trying to figure this out I've done nothing I've never done a quot hotfix quot or used a repair tool or anything really besides running a clean boot and clearing out some space in case that was the issue which obviously it is not I'm literally starting from scratch Consecutive failed SP1 Update error 800B0100 I need guidance I am so frustrated with this thing and I just don't have the will to go trying to fix it on my own I'm pretty tech savvy so I can navigate pretty well I just need to know where to go Give me some instructions so I can get this show on the road What do you need to help me P Updates that are in queue now Security Update for Microsoft NET Framework on Windows and Windows Server R for x - based Systems KB Security Update for Microsoft NET Framework on Windows and Windows Server R for x -based Systems KB Security Update for Microsoft NET Framework on Windows and Windows Server R for x -based Systems KB Security Update for Microsoft NET Framework on XP Server Vista Windows Server Server R for x KB Security Update for Microsoft NET Framework on XP Server Vista Windows Server Server R for x KB Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Security Update for Windows for x -based Systems KB Update for Windows for x -based Systems KB Update for Windows for x -based Systems KB Update for Windows for x -based Systems KB Windows Service Pack for x -based Systems KB Windows Malicious Software Removal Tool x - January KB Those are the Updates that quot Important quot that need to be installed There are also quot Optional quot updates including one for my display but i'm not worrying about those right now Any help is appreciated and I understand you will need logs and whatnot I am just not sure which ones or how to acquire them Thank you Kitty

A:Consecutive failed SP1 Update error 800B0100

Please follow the instructions in Windows Update Posting Instructions and post the results.

http://www.sevenforums.com/windows-updates-activation/273060-consecutive-failed-sp1-update-error-800b0100.html
Relevancy 68.37%

I got error code 9c48 when trying to install the important update for IE9. Not only has the update failed, but it has caused IE9 to be inoperable, resulting in NO browser. I can't seem to find any solution. Please help.

A:IE9 Update Failed - Error code 9c48

Try a system integrity scan
RUN > CMD > SFC /SCANNOW

Also try using firefox to access the net,then uninstall IE & download to install IE9 again.

You can try rolling back to your previous ver as well.

http://www.sevenforums.com/windows-updates-activation/165023-ie9-update-failed-error-code-9c48.html
Relevancy 67.51%

ASUS Desktop PC CM Series Windows Home Premium SP -bit Core i GB RAM GB HDD Windows updates not working for a while Initial was B appearing in the Windows Update window when searching for updates Found bad memory using Memtest and pulled the stick Other stick no errors after passes Toshiba HDD installed Ran two different HDD diagnostics test on it and it passed No conflicts in device manager Now Windows Update window showing error Based upon instructions ran System Update Readiness Tool SURT but that appears to have not made any resolution Ran it twice to ensure it ran successfully Then ran the Windows Update Diagnostic diagcab from go Error Update 0x8007370B Windows & Error Windows Update 80070002 Diag microsoft com fwlink LinkID and it shows Windows Update error x Windows Update Error 80070002 & Windows Update Diag Error 0x8007370B B - - -T- P as NOT FIXED All other items in list shows as FIXED SFC scannow will not run displaying the message quot windows resource protection could not perform the requested operation quot I tried the same in a elevated prompt in normal windows and in safe mode with the same result No luck running Surface Scan Ran chkdsk r twice also Screen captures of both errors and CBS log file attached Any help is greatly appreciated In the meantime I will begin running some antimalware scans just in case Thanks for any assistance

A:Windows Update Error 80070002 & Windows Update Diag Error 0x8007370B

Please follow the Windows Update Posting Instructions and post the requested data
If the file is too large (8MB compressed), remove the older CBSPersist cab files until the final file is below the limit - you can always post them separately after zipping them. (the forum doesn't allow the upload of bare CAB files, for a number of reasons)

We need that data whether or not either CheckSUR or SFC complete.

http://www.sevenforums.com/windows-updates-activation/346188-windows-update-error-80070002-windows-update-diag-error-0x8007370b.html
Relevancy 67.51%

I've done everything here with no fix Error Code x occurs in Windows Update or Microsoft Update I've done everything here with no fix KB Windows Update Fails f and - Microsoft Community These are the only solutions that i can find and i've done both of them and neither has worked or they've given me additional errors such as the troubleshooter just telling me it couldn't fix it and the second one saying invalid package In a week now i 0x80073712. all Error KB2919355 failed. update fixes won't be able to get updates to Windows because of this stupid update KB2919355 Error 0x80073712. all fixes failed. update so i'm desperate for help hoping that update KB2919355 Error 0x80073712. all fixes failed. there is something i've missed over the google search results i've gone through I also want to make it clear that I CAN'T WIPE THIS PC under any circumstances unless there is no other possible option If it truly is the only option than I'll do it but it's going to be months until i have the time to actually do it I have tried the DISM healthrestore it failed with Error x f f DISM failed No operation was performed I have tried the dism online remove-package packagename Package for KB bf ad e amd it failed with Error x f The specified package is not a valid windows package Again i need to make it very clear that i can't wipe my PC right now It will be weeks if not months until i can wipe this machine and it is the only one i can use right now And to be completely honest i shouldn't have to wipe my PC because microsoft screwed up I've been using windows since and i've never EVER had a problem this insanely stupid edit tried one crazy solution to erase HKEY LOCAL MACHINE SOFTWARE Microsoft Windows Curr entVersion WINEVT quot from the registry did not work

A:update KB2919355 Error 0x80073712. all fixes failed.

If you are still having a problem installing the latest KB2919355, zip up the files under c:\windows\logs\cbs and share them out on OneDrive, and I will take a look.

http://www.eightforums.com/windows-updates-activation/45742-update-kb2919355-error-0x80073712-all-fixes-failed.html
Relevancy 67.51%

Hi guys.

Thanks in advance

Legit copy of windows.

Removed 4 .cab's to get under 8megs.

Scannow clean.

A:Update KB2961072 failed error code 800B0100

Here's the error-lit from the CheckSUR scan


Code:
Unavailable repair files:
winsxs\manifests\amd64_microsoft-windows-winsock-core_31bf3856ad364e35_6.1.7601.18489_none_35c7815175410855.manifest
winsxs\manifests\amd64_microsoft-windows-winsock-core_31bf3856ad364e35_6.1.7601.22705_none_36a3a0208e215d89.manifest
servicing\packages\Package_2_for_KB2961072~31bf3856ad364e35~amd64~~6.1.1.1.mum
servicing\packages\Package_2_for_KB2961072~31bf3856ad364e35~amd64~~6.1.1.1.mum
servicing\packages\Package_for_KB2961072_SP1~31bf3856ad364e35~amd64~~6.1.1.1.mum
servicing\packages\Package_for_KB2961072_SP1~31bf3856ad364e35~amd64~~6.1.1.1.mum
servicing\packages\Package_for_KB2961072~31bf3856ad364e35~amd64~~6.1.1.1.mum
servicing\packages\Package_for_KB2961072~31bf3856ad364e35~amd64~~6.1.1.1.mum
servicing\packages\Package_2_for_KB2961072~31bf3856ad364e35~amd64~~6.1.1.1.cat
servicing\packages\Package_2_for_KB2961072~31bf3856ad364e35~amd64~~6.1.1.1.cat
servicing\packages\Package_for_KB2961072_SP1~31bf3856ad364e35~amd64~~6.1.1.1.cat
servicing\packages\Package_for_KB2961072_SP1~31bf3856ad364e35~amd64~~6.1.1.1.cat
servicing\packages\Package_for_KB2961072~31bf3856ad364e35~amd64~~6.1.1.1.cat
servicing\packages\Package_for_KB2961072~31bf3856ad364e35~amd64~~6.1.1.1.cat
I'll post a fix protocol later.

http://www.sevenforums.com/windows-updates-activation/338932-update-kb2961072-failed-error-code-800b0100.html
Relevancy 67.51%

I have been getting help from Arc over on the BSOD section of this forum site for a few weeks now. I figured I'd start a thread here about the update troubles I've been experiencing over the past few days as well. There is one update that won't apply no matter what I try. I've run the amalgamated .bat tool posted on this forum and that didn't solve my issue. I will let my logs and screenshots speak for themselves from here, though.

Thanks in advance for any help!

As stated in the title, error code is 80073712. Also, I can't seem to get my CBS logs to upload. I keep getting an internal server error about the resource not being available. The screenshot attached perfectly fine. I will try to either edit this post to add them or add them as a comment.

Attachment 298869

A:Security update failed, error code 80073712

Still can't get the CBS.zip to upload. I will attach a screenshot of the error page. I'll try it again later.

Attachment 298870

http://www.sevenforums.com/windows-updates-activation/316272-security-update-failed-error-code-80073712-a.html
Relevancy 67.51%

I've haven't been able to install this update 'Security Update for Microsoft .NET Framework 3.5.1 on Windows 7 and Windows Server 2008 R2 SP1 for x64-based Systems (KB2943357)'
It keeps coming up with an error code 80073712.

I am also getting an error 8004100E when trying to upgrade to Windows 10

Using the SUR tool I got the following log:

A:Security Update Failed Error code 80073712

You have rather a lot of errors there!

Code:
Summary:
Seconds executed: 124
Found 96 errors
CSI Manifest All Zeros Total count: 72
CBS MUM Corrupt Total count: 14
CBS Catalog Corrupt Total count: 10

Unavailable repair files:
winsxs\manifests\amd64_microsoft.transactions.bridge.dtc_b03f5f7f11d50a3a_6.1.7601.22733_none_65085bdd54b4a629.manifest
winsxs\manifests\amd64_wcf-m_sm_ins_rc_dll_31bf3856ad364e35_6.1.7601.22733_none_2795328d79930284.manifest
winsxs\manifests\amd64_wcf-system.runtime.serialization.ref_b03f5f7f11d50a3a_6.1.7601.22733_none_424d323c8e896dad.manifest
winsxs\manifests\amd64_wcf-icardres_dll_vista_31bf3856ad364e35_6.1.7601.18523_none_6f276a738180cba8.manifest
winsxs\manifests\amd64_wcf-system.servicemodel.ref_b03f5f7f11d50a3a_6.1.7601.22733_none_5ebf2b63339ef82d.manifest
winsxs\manifests\amd64_wcf-smdiagnostics_b03f5f7f11d50a3a_6.1.7601.18523_none_f5ee0756c06c09cd.manifest
winsxs\manifests\msil_system.runtime.serialization.resources_b77a5c561934e089_6.1.7601.22733_en-us_787b5545d9776103.manifest
winsxs\manifests\msil_smdiagnostics.resources_b77a5c561934e089_6.1.7601.18523_en-us_496526973f1e68f2.manifest
winsxs\manifests\amd64_wcf-m_sm_ins_rc_dll_31bf3856ad364e35_6.1.7601.18523_none_271663c8606d49a2.manifest
winsxs\manifests\amd64_microsoft-windows-wcfcorecomp.resources_31bf3856ad364e35_6.1.7601.22733_en-us_ff634b2369479517.manifest
winsxs\manifests\amd64_wcf-infocard_api_dll_31bf3856ad364e35_6.1.7601.18523_none_02011939c648dcfe.manifest
winsxs\manifests\amd64_wcf-system.servicemodel.washosting_b03f5f7f11d50a3a_6.1.7601.18523_none_0242455f46f9765d.manifest
winsxs\manifests\amd64_wcf-icardagt_exe_31bf3856ad364e35_6.1.7601.22733_none_907097fea175fea2.manifest
winsxs\manifests\amd64_wcf-system.runtime.serialization_b03f5f7f11d50a3a_6.1.7601.22733_none_7d243f06e2816846.manifest
winsxs\manifests\amd64_wcf-m_sm_cfg_ins_exe_31bf3856ad364e35_6.1.7601.22733_none_5eba49464cf449c9.manifest
winsxs\manifests\msil_system.runtime.serialization_b77a5c561934e089_6.1.7601.22733_none_bff6ca10b626f70a.manifest
winsxs\manifests\msil_system.identitymodel_b77a5c561934e089_6.1.7601.18523_none_f1b7e3b500b0dd75.manifest
winsxs\manifests\amd64_wcf-system.servicemodel_b03f5f7f11d50a3a_6.1.7601.18523_none_a1a8f58c939aac4a.manifest
winsxs\manifests\amd64_infocard.resources_b77a5c561934e089_6.1.7601.18523_en-us_1c3528fb3f63ae97.manifest
winsxs\manifests\amd64_microsoft-windows-wpfcorecomp.resources_31bf3856ad364e35_6.1.7601.18523_en-us_102e1681a6f8daa0.manifest
winsxs\manifests\msil_system.servicemodel.washosting_b77a5c561934e089_6.1.7601.22733_none_7b9fe117b7a77077.manifest
winsxs\manifests\msil_smsvchost.resources_b03f5f7f11d50a3a_6.1.7601.22733_en-us_b2b27b25e379631c.manifest
winsxs\manifests\msil_system.servicemodel_b77a5c561934e089_6.1.7601.22733_none_627b1e3960ee4846.manifest
winsxs\manifests\msil_smsvchost.resources_b03f5f7f11d50a3a_6.1.7601.18523_en-us_c97f21bfc9d2e96e.manifest
winsxs\manifests\amd64_microsoft.transactions.bridge.dtc_b03f5f7f11d50a3a_6.1.7601.18523_none_7bd502773b0e2c7b.manifest
winsxs\manifests\amd64_wcf-m_sm_mof_31bf3856ad364e35_6.1.7601.22733_none_230aba46aff3690d.manifest
winsxs\manifests\msil_system.servicemodel.resources_b77a5c561934e089_6.1.7601.22733_en-us_0f4b4b63d0545797.manifest
winsxs\manifests\amd64_wcf-infocard_api_dll_31bf3856ad364e35_6.1.7601.22733_none_027fe7fedf6e95e0.manifest
winsxs\manifests\amd64_wcf-smsvchost_b03f5f7f11d50a3a_6.1.7601.22733_none_b0fabad924c43863.manifest
winsxs\manifests\msil_microsoft.transacti..ridge.dtc.resources_b03f5f7f11d50a3a_6.1.7601.22733_en-us_ee690b9c8991e0b1.manifest
winsxs\manifests\amd64_infocard.resources_b77a5c561934e089_6.1.7601.22733_en-us_05688261590a2845.manifest
winsxs\manifests\msil_system.identitymodel.resources_b77a5c561934e089_6.1.7601.18523_en-us_d834c775e8e8bf5a.manifest
winsxs\manifests\amd64_wcf-icardagt_exe_31bf3856ad364e35_6.1.7601.18523_none_8ff1c939885045c0.manifest
winsxs\manifests\msil_system.service... Read more

http://www.sevenforums.com/windows-updates-activation/377490-security-update-failed-error-code-80073712-a.html
Relevancy 67.51%

error code: 80075070
Security Update for Microsoft .NET Framework 3.5.1 on Windows 7 and Windows Server 2008 R2 SP1 for x64-based Systems (KB2972211)
Download size: 12.8 MB

cbs.zip is 35mb max upload limit is 8mb

this is a laptop i have been removing addware on for a freind
it now seems to be working fine other than this one update

thanks

A:.NET Framework 3.5.1 failed to update error code: 80075070

Ok i deleted some of the files in the cbs folder to make it smaller and uploaded it
hopefully someone can reply now so i can get this laptop back to them

edit
nevermind
downloading the update from the microsoft website rather than relying on windows update seems to have fixed it

http://www.sevenforums.com/windows-updates-activation/345688-net-framework-3-5-1-failed-update-error-code-80075070-a.html
Relevancy 67.51%

This appears to be a language pack error. Failed to update error 00000002 What is that even mean? I typed in this error code here and get no matched results 130 views so far and no one has any idea? HeLp? And thank you!

A:Security Update for Microsoft .NET Framework 1.1 SP1 Failed error 2

try to disable the firewall, check if there is any other security software , you should not have more than 1 security software. email me if the problem persist again

http://www.vistax64.com/windows-updates/296324-security-update-microsoft-net-framework-1-1-sp1-failed-error-2-a.html
Relevancy 67.51%

automatic microsoft update continued to fail on everyday from Feb 16th and today i tried to do manual update [Microsoft .NET Framework 2.0 Service Pack 1 (KB110806)]. I received a error:Error Code: 0x80246008.

The Microsoft Help asked me to start BITS (Background Intelligent Transfer Service) and I received an "cannot start the Background Intelligent Transfer Service on Local Computer. Error 126: The specified module couldnot be found"

Please help me. What I can do to resolve this error? I am actually using Win XP (servicepack 2). why the update is installing servicepack 1?
 

Relevancy 67.51%

OS is Vista Home Premium. Windows Update fails when trying to install KB980248. I can download the Update KB980248 manually, but the installation fails. The error code is 80070020.

A:Update KB980248 failed error code 80070020

Happy Holidays

The error indicates that the process is being used by another program
Perform a clean boot to determine the source of the other use.
http://support.microsoft.com/kb/929135

The above procedure should solve your problem. If it does not and you are certain that you follwed the procedure correctly, try these methods. Ask about method 1, above if you have questions, it should work

How do I reset Windows Update components?
Description of the System Update Readiness Tool for Windows Vista, for Windows Server 2008, for Windows 7, and for Windows Server 2008 R2
Cannot Update Windows using Windows Update

If it were my computer I would turn off the firewall and anti virus to start. I feel that one of these two are the problem

http://www.vistax64.com/windows-updates/286253-update-kb980248-failed-error-code-80070020-a.html
Relevancy 67.51%

Hello
I'm trying to install this update KB978637 and it always gives the 800B0100 error. I already installed the system readiness tool but I still have the same problem. Can anyone help out? I have on attachment the log files. It seems that some files are corrupted, but how do I replace them? This is a clean install of windows 7.
Cheers.

A:Update KB978637 failed to install - 800B0100 Error

Here is a bit sophisticated because you have coruupted not only in C:\Windows\Servicing\Packages but also in C:\Windows\WinSxS\Manifests

I attached to post corrupted files according to path they should be placed






Quote:
Unavailable repair files:
winsxs\manifests\amd64_microsoft-windows-wow64_31bf3856ad364e35_6.1.7600.20602_none_c4f7d8ca09dfa6fb.manifest
winsxs\manifests\amd64_microsoft-windows-wow64_31bf3856ad364e35_6.1.7600.16491_none_c40bea82f10bec2c.manifest
winsxs\manifests\wow64_microsoft-windows-wow64_31bf3856ad364e35_6.1.7600.20602_none_cf4c831c3e4068f6.manifest
winsxs\manifests\wow64_microsoft-windows-wow64_31bf3856ad364e35_6.1.7600.16491_none_ce6094d5256cae27.manifest
servicing\packages\Package_1_for_KB978637~31bf3856ad364e35~amd64~~6.1.1.1.mum
servicing\packages\Package_1_for_KB978637~31bf3856ad364e35~amd64~~6.1.1.1.mum
servicing\packages\Package_2_for_KB978637~31bf3856ad364e35~amd64~~6.1.1.1.mum
servicing\packages\Package_2_for_KB978637~31bf3856ad364e35~amd64~~6.1.1.1.mum
servicing\packages\Package_for_KB978637_RTM~31bf3856ad364e35~amd64~~6.1.1.1.mum
servicing\packages\Package_for_KB978637_RTM~31bf3856ad364e35~amd64~~6.1.1.1.mum
servicing\packages\Package_for_KB978637~31bf3856ad364e35~amd64~~6.1.1.1.mum
servicing\packages\Package_for_KB978637~31bf3856ad364e35~amd64~~6.1.1.1.mum
servicing\packages\Package_1_for_KB978637~31bf3856ad364e35~amd64~~6.1.1.1.cat
servicing\packages\Package_1_for_KB978637~31bf3856ad364e35~amd64~~6.1.1.1.cat
servicing\packages\Package_2_for_KB978637~31bf3856ad364e35~amd64~~6.1.1.1.cat
servicing\packages\Package_2_for_KB978637~31bf3856ad364e35~amd64~~6.1.1.1.cat
servicing\packages\Package_for_KB978637_RTM~31bf3856ad364e35~amd64~~6.1.1.1.cat
servicing\packages\Package_for_KB978637_RTM~31bf3856ad364e35~amd64~~6.1.1.1.cat
servicing\packages\Package_for_KB978637~31bf3856ad364e35~amd64~~6.1.1.1.cat
servicing\packages\Package_for_KB978637~31bf3856ad364e35~amd64~~6.1.1.1.cat


Two methods to fix thiese files (your choose)

METHOD I

1.Empty folder C:\Windows\Logs\CBS
next download files attached to post and unpack them anywhere
2.Navigate to C:\Windows\Servicing\Packages ,takeownership of this folder and add your account to have full control
3.Copy my *.cat ,*.mum files to this folder -if you have already any file then replace it.
4.Remove your account from permissions to Packages folder
5.Restore ownership of Packages folder back to "NT Service\TrustedInstaller"
6.Go to C:\Windows\WinSxS\Manifests ,takeownership of this folder and add your account to have full control
7.Copy my *.manifest files to this folder -if you have already any file then replace it.
8.Remove your account from permissions to Manifests folder
9.Restore ownership of Manifests folder back to "NT Service\TrustedInstaller"

helpful links (please read them)

Take Ownership of file - Vista Forums
TrustedInstaller - Restore as Owner - Vista Forums
Folder Permissions - Vista Forums

//sometimes you may have problem to apply changes for Manifests problem even if you everything correct doing//

METHOD II (uncomfortable but always work)

1.Download attached to post FixPacks.zip file -in zip file is packed Packs folder -you have to unpack it and place directly on C: exactly as I show below:


2.Boot Win 7 DVD (if you don't have Win7 DVD instead use special recovery disk Download Windows 7 System Recovery Discs &#x2014; The NeoSmart Files )
Choose language>>Repair Computer>>WinRE>>command prompt

and type:

robocopy C:\Packs C:\ /E /IS

press ENTER,and next type:

del C:\Windows\Logs\CBS\*.*

press ENTER

3.Run system normally and try install updates

If still no result again run Readiness Tool and attache new CheckSur.log to post.

http://www.sevenforums.com/windows-updates-activation/68403-update-kb978637-failed-install-800b0100-error.html
Relevancy 67.51%

I have a desktop computer that is running Windows Vista. I have Adobe Reader 9 and every time I turn on my computer, Adobe Reader says it is ready to install an update to address customer issues and security vulnerabilities. I click through to install it, and after a few seconds, it gives me this error message:

Error 1325. Documents is not a valid short file name.

I don't know what to do. I tried uninstalling Adobe 9 so that I could reinstall from scratch, but I got the same exact error message when I tried to uninstall the program from the Control Panel. I tried downloading Adobe X from the Adobe website, but got the same error there as well. I don't know what to try next, but this problem is bugging me and I don't know what it means.

Thanks for your help.
 

https://forums.techguy.org/threads/adobe-reader-update-failed-error-1325.1020531/
Relevancy 67.51%

Hello sevenforums Today I installed important updates one failed - quot Cumulative Security Update for Internet Explorer for Windows for x -based Systems KB quot I use firefox should I ignore the failed update or make error Security Failed IE9 Cumulative Update, 80242016 sure that it is installed properly so I don't cause future problems The update is quot Important quot it says so i the view installed updates Failed IE9 Cumulative Security Update, error 80242016 One of the updates was - quot Internet Explorer for Windows for x -based Systems quot I uninstalled IE because it messed up my weather desktop gadget and I didn't plan on using IE I tried the standalone installer for the failed updated and got the quot this update is not applicable to your computer quot message The Failed IE9 Cumulative Security Update, error 80242016 only thing I can think of doing now is using system restore and trying to install the updates again My antivirus was not disabled during the installation of the updates Should I disable it It never caused problems with any of my previous updates Thank you for any help Cumulative Security Update for Internet Explorer for Windows for x -based Systems KB Installation date AM Installation status Failed Error details Code Update type Important A security issue has been identified in a Microsoft software product that could affect your system You can help protect your system by installing this update from Microsoft For a complete listing of the issues that are included in this update see the associated Microsoft Knowledge Base article After you install this update you may have to restart your system More information MS - Cumulative security update for Internet Explorer December Help and Support Microsoft Support

A:Failed IE9 Cumulative Security Update, error 80242016

Sorry - seems your post got lost in the rush!


Please follow the Windows Update Posting Instructions and post the requested data

http://www.sevenforums.com/windows-updates-activation/314672-failed-ie9-cumulative-security-update-error-80242016-a.html
Relevancy 67.51%

I m seeing this a few times now on PC that are set to upgrade including one of my own ASUS Windows PC The fix appears to be to do the following - MS appears to be recommending the link on twitter Go into quot C Windows SoftwareDistribution Download quot and delete everything in that folder Now run the command prompt as an administrator Type in quot wuauclt exe updatenow quot Go to your Control Panel gt Windows Update and your Windows should start re-downloading from scratch hopefully without flaws this time https www reddit com r windows comments eyrre fix for the error when trying to install Click to expand Some sites also recommend emptying the recycle bin as well before running the Command Prompt http answers microsoft com en-us owsSupport amp linkId I l edit back in a few hours as my PC has now started to download the files again MB - It already has the hidden files - loaded on the th windows BT windows WS Under C nbsp

Relevancy 67.51%

help i am trying to update my vista 32 bit and when the program is searching for a update, i get the error code and it says " windows update encountered an unknown error." code 80070424 please help me solve my problem

A:Help! update search failed error code 80070424

Please read thoroughly this one:Windows Update Error 80070424

If described steps are too hard to follow then please prepare log from VistaSysInfoTool (select all) VistaForums SysInfo Tool

Log attache to post

http://www.vistax64.com/windows-updates/261987-help-update-search-failed-error-code-80070424-a.html
Relevancy 67.08%

Hi everyone,

I have had this issue since September now and cannot seem to fix it,

The Windows update does not seem to be able to get past KB2943357 or KB2937610.
Worst part is that it attempts to install them every time I shut down resulting in a +20 minute shutdown every time.

- For SURT : i have downloaded and installed the KB947821 twice, first time it found errors, second time it didn't.

- SFC scan : Results are in the CBS.log file
- Windows error codes : 80073712

I use Windows 7 SP1 Home Premium x64

I hope you all can help me, ive been struggling with it for months now.

A:KB2943357 and KB2937610 error code 80073712 failed update

You have some MAJOR corruption.

Code:
Line 349082: 2015-01-05 18:19:25, Info CSI 000008b9 [SR] Repairing 128 (0x0000000000000080) components
Line 349083: 2015-01-05 18:19:25, Info CSI 000008ba [SR] Beginning Verify and Repair transaction
Line 349086: 2015-01-05 18:19:25, Info CSI 000008bc [SR] Cannot repair member file [l:32{16}]"bthprops.cpl.mui" of BTH-USER.Resources, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture = [l:10{5}]"en-US", VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
Line 349089: 2015-01-05 18:19:25, Info CSI 000008be [SR] Cannot repair member file [l:28{14}]"hidbth.inf_loc" of hidbth.inf.Resources, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture = [l:10{5}]"en-US", VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
Line 349092: 2015-01-05 18:19:25, Info CSI 000008c0 [SR] Cannot repair member file [l:12{6}]"ks.inf" of ks.inf, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type = [l:24{12}]"driverUpdate", TypeName neutral, PublicKey neutral in the store, hash mismatch
Line 349095: 2015-01-05 18:19:25, Info CSI 000008c2 [SR] Cannot repair member file [l:48{24}]"accessibilitycpl.dll.mui" of Microsoft-Windows-accessibilitycpl.Resources, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture = [l:10{5}]"en-US", VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
Line 349098: 2015-01-05 18:19:25, Info CSI 000008c4 [SR] Cannot repair member file [l:24{12}]"hwcompat.txt" of Microsoft-Windows-Application-Experience-Inventory, Version = 6.1.7601.18683, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
Line 349101: 2015-01-05 18:19:26, Info CSI 000008c6 [SR] Cannot repair member file [l:30{15}]"xpsservices.dll" of Microsoft-Windows-Component-XpsOMAndStreaming, Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
Line 349104: 2015-01-05 18:19:26, Info CSI 000008c8 [SR] Cannot repair member file [l:32{16}]"FntCache.dll.mui" of Microsoft-Windows-DirectWrite-FontCache.Resources, Version = 7.1.7601.16492, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture = [l:10{5}]"de-DE", VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
Line 349107: 2015-01-05 18:19:26, Info CSI 000008ca [SR] Cannot repair member file [l:32{16}]"FntCache.dll.mui" of Microsoft-Windows-DirectWrite-FontCache.Resources, Version = 7.1.7601.16492, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture = [l:10{5}]"zh-HK", VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
Line 349110: 2015-01-05 18:19:26, Info CSI 000008cc [SR] Cannot repair member file [l:46{23}]"DevicePairingWizard.exe" of Microsoft-Windows-DevicePairingApp, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, Publi... Read more

http://www.sevenforums.com/windows-updates-activation/357447-kb2943357-kb2937610-error-code-80073712-failed-update.html
Relevancy 67.08%

computers desktop running Ultimate and backing up to AC-powered external drive and laptops running Professional and back up to USB-powered external drives Backups set for full data and included system image for all SP-1 Access Backup denied 0x80070005 Error: Failed after update , - No Error: 0x80070005 - Access denied , Backup Failed after SP-1 update problem with desktop which backs up daily but unable to successfully back up either laptop since Windows Update installed SP- Fails as below Error x - Access denied Both laptops were set to run backups once a week since the external drives are not plugged in at all times and never had a problem with the backups failing before No changes were made before or after SP- checked permissions all set to Full Control log in as Administrator with UAC off only one using the computers Ran chkdsk on both laptops and both external drives and no problems found Ran sfc scannow and also clean for both Tried disabling all non-Microsoft services except for anti-virus and bluetooth mouse is bluetooth on one laptop and backup still failed with the same error Seems to get to approx - before it fails Have found older posts referecing making sure the D drive is not set for backup or system restore Have never used it backups have always been to the external drives L on one laptop and H on the other Other than a problem with the fingerprint reader on laptop after the SP- update had to go back and install the original HP driver SP- seems to be fine and do not really want to un-install Not sure if I even have a valid system image for either computer at this time as each time the backups failed the image file on the ext HDDs was significantly larger than before one drive is GB and was showing approx GB for the image and GB for all the data now shows GB for the image and GB for the data and less than GB still free - had over GB free initially the other drive is GB and also shows similar stats I have also posted on the answers microsoft forum and their suggestion was to disable my anti-virus Did so and was able to complete a backup tried re-enabling and again the backup failed Have not changed the program I m using and its not causing backups to fail on the desktop computer running the same program Do not really want to have to disable my anti-virus every time a backup is scheduled to run for both laptops seems there must be another solution as backups were working just fine before SP- Thanks nbsp

A:Error: 0x80070005 - Access denied , Backup Failed after SP-1 update

https://forums.techguy.org/threads/error-0x80070005-access-denied-backup-failed-after-sp-1-update.984116/