Windows Support Forum

Wont boot up past hp screen shows black empty screen

Q: Wont boot up past hp screen shows black empty screen

Hp notebook computer wont startup past the hp screen. It shows a black screen then goes back to hp screen. I did the hard reset, it didn't work. I did the test and all of them said passed. It started doing this when i was reseting it and it dropped on the floor. The battery and the hard drive fell out. When i turned it back on, it wasnt working. I dont know what is wrong with it....

http://h30434.www3.hp.com/t5/Notebook-Boot-and-Lockup/Wont-boot-up-past-hp-screen-shows-black-empty-screen/td-p/5609776
Relevancy 100%
Preferred Solution: Wont boot up past hp screen shows black empty screen

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Relevancy 15.91%

Hello I have a tower just recently bought all the parts from newegg and was building the tower for the last days I had everything put in as it should be and initially it stayed on but no image was portraying problems up boot Building computer on the monitor A friend explained I was using the wrong port to portray image as it should be through the video card I should be connecting it but after troubleshooting the problem Building computer boot up problems initially I removed RAM and put it back in but computer now turns on for a second then right off I hear and see the fans running the dvd drive spinning and the lights go on but then it shuts right off after another - seconds it turns on again and then after another second turns right back off in an endless cycle until I turn it off completely and unplug it Not sure what the next steps are or if I should return the moba for an exchange After reading a lot of forums I noticed that it could be the RAM was improperly placed so I tried many times to take it out and put it back in but same problem keeps occurring I hear no beeps and only hear a click from the power supply when it goes on I tried the psu tester on the power supply and it tells me it should be working fine Any one have any idea moba ASRock Z M Pro Micro ATX Intel Motherboard ram CORSAIR Vengeance GB x GB -Pin DDR SDRAM DDR PC Desktop Memory Model CMZ GX M A C B power EVGA -G - -XR W Power Supply case Thermaltake Level Series Level GT VN W N Black Computer Case processor Intel Core i - K GHz LGA BX I K Desktop Processor video card EVGA GeForce GTX Ti G-P - -KR FTW w ACX Cooling Video Card Please someone help and thanks to all nbsp

A:Building computer boot up problems

Okay, I've had the same issue with a new build: Put it all together, switch on the power and basically nothing. Do the following tried and true diagnostic steps that can be tedious but costs nothing to do and can often zero in on your issue:

1. Uninstall everything from your motherboard and disconnect all peripherals from your power supply except psu to motherboard, cpu, and one stick of RAM. Now turn it on. If it boots up and stays booted then shut it down and then...

2. Add your second stick of memory -- nothing else. Repeat by booting up and if it stays booted up then...

3. Start adding one piece of hardware at a time and repeat as directed.

What are your findings?
 

http://www.techspot.com/community/topics/building-computer-boot-up-problems.215853/
Relevancy 16.34%

Hi all, my pc has been playing up for a while, it has gone through 3 CMOS batteries in the space of 5 months, but just now it has presented a new issue (could be related), with two sticks of RAM in, it posts and boots the os as normal... With 3 in, it will post and get through BIOS, but it starts loading OS and jumps back to BIOS again... Now with 4 sticks in, it wont even post... Are there any suggestions

My PC specs...
Penryn 1600SLI-110dB mobo
Intel quad core q6700
And (now only) 4gb ram
 

A:RAM preventing boot

Try one stick at a time
 

http://www.techspot.com/community/topics/ram-preventing-boot.214773/
Relevancy 20.64%

My Asus Q550LF crapped out on me. I was browsing when a whole bunch of black rectangles appeared on my screen, about an inch long. I restarted my computer thinking it just froze or something. I could occasionally get to the desktop page if I unplugged the charger but now it doesn't even turn on. It'll make one beep when I push the power button but that's it. What might the issue be and is it gonna be expensive? Because this computer has been one of the worst I have ever owned and I would just scrap it or something if it might end up being costly.
 

A:Laptop wont turn on anymore

How old is it? It sounds like it could be a multiple of hardware failures including the motherboard. The black rectangles sounds like what we call video card artifacting which means the video card is dying. But the fact that it is not even booting up could point to a failed hard drive. Again, it could be anything.

Asus is known for poor customer service but you could try giving them a call.

Do you know anyone who can do some diagnostics on it? I certainly would be checking out the hard drive.
 

http://www.techspot.com/community/topics/laptop-wont-turn-on-anymore.214221/
Relevancy 27.09%

Microsoft showed off a whole range of new PCs and devices running Windows 10 at Computex 2015, but one that really caught the eye is the Quanta Compute Plug, an entire PC integrated into a power plug the size of...

Read more
 

A:Microsoft shows off PC integrated into power plug

They may be handy to a lot and even have very reasonable prices but I can't imagine myself ever wanting any of these.
 

http://www.techspot.com/community/topics/microsoft-shows-off-pc-integrated-into-power-plug.213681/
Relevancy 30.53%

Hello,

I've got a Dell Inspiron 9400.

For a few years now the left half of the screen is really dark, with the other side normal brightness and a noticeable divide between the two. This only happens when the power supply is plugged in, the screen is fine when running off the battery.

I remember at the time doing a quick search and reading that it was likely to be a faulty battery, so that was replaced but didn't make a difference. Very few searches come back with an exact match of my situation, but keep seeing to detach the LCD cables and make sure they're in good condition yet haven't seen any success stories.

Does anyone know the problem?

Oli
 

A:Dell Inspiron half of the screen is dark

Does attaching an external monitor show the same problem?
 

http://www.techspot.com/community/topics/dell-inspiron-half-of-the-screen-is-dark.187509/
Relevancy 26.66%

Microsoft has had plenty to say about Windows 10 over the past several months leading up to its Build conference that wraps up today. While we've heard some details about DirectX 12 and how it'll be exclusive to Windows 10,...

Read more
 

A:This Square Enix tech demo shows DirectX 12 in all its glory

Looks like the character was pulled directly from Morrigan (Dragon Age)...
 

http://www.techspot.com/community/topics/this-square-enix-tech-demo-shows-directx-12-in-all-its-glory.212604/
Relevancy 21.07%

Hi I have an HP zbook white a K610m GPU. I want to play GTA V and I read on forums it helps to disable your gpu. howerver when I disabled my GPU the screes flashes black for like 1 sec and then my gpu isnt disabled. can you help me to resolve this?
 

http://www.techspot.com/community/topics/gpu-wont-stay-disabled.212026/
Relevancy 52.03%

Hello,

I own a custom laptop on an MSI 16F2 platform. Few weeks ago my GTX 670M card died.

Out of better options, I bought an used GTX 660M from an acquaintance.

I had it installed, started Windows and everything looked OK. Then I installed the Nvidia drivers and after reboot, right after the loading screen, I got a black screen (with the screen still lit).

I went into Safe mode and uninstalled the driver. Then installed again and got the same result. Went into Bios, change settings, tried resetting CMOS, nothing worked. Installed Windows 7 Ultimate again, then Windows 8, same thing. I also tried the driver modding instructions on this forum, still nothing.

I have no clue what is wrong. If you have any idea, please help me with this.

Thank you,

Fox
 

A:GTX 660M black screen after installing driver

I have connected the laptop to an external monitor and it works with the Nvidia driver installed. The laptop screen works just fine without the drivers. I would really appreciate any form of help. Is it maybe the BIOS?

Thx,
Fox
 

http://www.techspot.com/community/topics/gtx-660m-black-screen-after-installing-driver.211105/
Relevancy 15.48%

I have just added a new SSD drive does recognize 1720 Inspiron in modular boot bay not BIOS sequence HDD in the modular bay of my Inspiron The SSD drive in modular bay is accessible if I boot using my normal harddrive or USB DVD-ROM drive for OS installation which I managed to install on the SSD drive Once boot using my regular HDD I can see the drive is set to Disk in Windows Disk Management And my other HDDs Inspiron 1720 BIOS does not recognize modular bay HDD in boot sequence as Disk and Disk I can boot thru HDD or HDD by selecting them in boot sequence However the SSD drive is not available as part of the boot sequence in the BIOS setup or F boot sequence The BIOS though recognize that there is an SSD drive attached Inspiron 1720 BIOS does not recognize modular bay HDD in boot sequence in modular drive bay My Inspiron is using the latest A BIOS and I could not find a way to include the SSD as part of the boot sequence The boot sequence works when I put back the DVD-ROM drive which boots without any problem with any bootable CD DVD Is there any way I can make the modular bay SSD bootable other than of course putting the SSD in the HDD or HDD caddy which some thing I do not wish to do Please help nbsp

http://www.techspot.com/community/topics/inspiron-1720-bios-does-not-recognize-modular-bay-hdd-in-boot-sequence.210955/
Relevancy 45.58%

Hi my daughter tried to adjust the resolution and now the screen is Black and stuck on Out Of Range. I cannot even get it safe mode or anything. Just a black screen with the writting. It's a windows xp 32. My son is so sad if anyone knows what to do please help. Thank you.
 

A:PC monitor screen is black & says "Out Of Range"

Repeatedly press F8 while the system is booting.. The very first stuff you see on screen will either be your motherboard splash screen or some text. When you get to the menu where you can make a selection, choose VGA mode NOT Safe Mode. That will boot your computer at 640x480, but it will boot with full driver support, just as if things were normal. Change the resolution to what you want after that.

Remember if you change it to something that goes 'out of range' DO NOT touch anything for 15 seconds. It will revert back to what it was after that time and you can try again.

Unrelated.. Go to school at UMR? or different Miner?
 

http://www.techspot.com/community/topics/pc-monitor-screen-is-black-says-out-of-range.210867/
Relevancy 30.53%

My newest task is centered around an HP Pavilion 15-p033ca laptop with a broken screen. Replacing the screen is actually super simple but my issue lies elsewhere.

Normally I would hook the laptop up to a monitor via VGA cable. This newer laptop only has an HDMI hook-up, so I hooked it up to my TV with that cable. The HP logo upon start up is semi-visible as the picture is distorted. So, before I spend money and order the screen my question is...

Does an HDMI relay the Broken screens picture to the TV and that's why is messed up? or should the TV picture still be clear? Like when a broken screen laptop is hooked to an external monitor with a VGA and the external monitor works fine.

I'm worried there may be an internal GPU or Mobo issue aside from the screen being broke.... Finally is there a better way I can test this instead?

Thanks for any info or Ideas in advance!
 

Relevancy 31.39%

I am having an intermittent issue with my screen not waking up. It goes to sleep after 10 minutes normally but just occasionally it doesn't come back on. usually I have to reboot the pc. I tried a different monitor which worked fine, when I reconnected my normal monitor it also worked fine. The monitor power light flashes to indicate its in sleep mode but doesn't want to wake despite moving mouse or pressing keyboard. The graphics card is only a couple of months old and the screen is over 5 years old.
This problem only happens maybe once a month, the rest of the time it works as normal. Any suggestions gratefully received.
 

A:Intermittent blank screen

First, are you doing anything specific when this occurs, I.e. a particular game, video rendering, etc.? Second, is there dust build-up in your system? Check especially your video card fan.
 

http://www.techspot.com/community/topics/intermittent-blank-screen.209381/
Relevancy 30.1%

Hi, am prepared to be labelled "thick as mince" however I wonder if anyone can advise how to proceed with the following: Replaced cracked laptop screen on a TM99, on first start up after replacement, the screen worked.....woohoo!, however.....on next startup, there was nothing, no lights, no start up screen...nada. Replaced new with original screen, which although cracked had worked, and it too now failed. Any ideas? The cable for the screen was seated properly and securely, nothing else was moved so am struggling to establish a reason for this non conformance. Could it possibly be a jammed "lid closed" switch? If this is potentially the culprit, anyone know whereabouts it is? Thanks
 

http://www.techspot.com/community/topics/packard-bell-tm99-laptop-failed-screen-replacement.208913/
Relevancy 30.96%

I am getting White Horizontal line on top of the screen.
I plugged out signal cable, those white horizontal line is gone. but I plug in switch cable, horizontal line appearing on top of the screen, so what's causing this?
 

A:White Horizontal line on top of the screen

Could u give some specs what monitor and video card, what operating system? what computer?
 

http://www.techspot.com/community/topics/white-horizontal-line-on-top-of-the-screen.208508/
Relevancy 20.64%

Hopefully someone can answer this as im baffle, my computer will turn on and of with no problem as ling my printer is plug in but if printer cable unplug it won't turn on but if printer cable in plug in it will turn on but while the comptuer turn on and I unplug the printer cable it will shut down nothin making since but as long the printer is unplug it will not start or boot blank screen but printer plug in I can get to the boot or cmos screen please help Thanks

PS it a Dell PP17L Latitude
 

http://www.techspot.com/community/topics/pc-wont-turn-on-if-printer-not-plug-in.208502/
Relevancy 52.46%

Hi, I have a Toshiba Satellite Pro C660 with a blank screen. The laptop starts up and goes through its boot cycle fine, but nothing is displayed on the screen.

I've read through tons of forums, but nothing seems to work.

I did the whole removal of battery, power supply and holding the power button for 60 secs... still blank...

When plugging in an external monitor it works perfectly fine, so this eliminates any issues with the CPU / GPU / RAM / HDD, etc.

I re-installed windows 7, which would hopefully eliminate any software issues.

Next logical step was to check the LCD backlight, inverter and ribbon cable... So I replaced the screen, but still blank screen. Just as a side note, the backlight lights up with both old and new display, but no picture.

This leaves me to think that it might be something in the BIOS?

Any suggestions / ideas?
 

http://www.techspot.com/community/topics/toshiba-black-screen-problem.208461/
Relevancy 31.39%

Hi there! I'm using HP presario c700 . During few days I'm going to see display is not working properly. I mean I can't see anything without sound, It's display is going to show a black shadow with some scratchs.

Please anyone say something, what should I do?
 

A:Laptop Screen Problem

Hi there, have you tried hooking up to an external monitor? This will help you determine if it's a problem with the screen or logic board.
 

http://www.techspot.com/community/topics/laptop-screen-problem.208402/
Relevancy 32.25%

After 3 days of not using my pc(due to broken psu) after I replace with a new psu my screen is so dim tried everything from replacing wires,adjusting brightness,replacing hardwares to replacing monitors but the problem still persists I dunno what the problem is can someone help me. thanks in advance
 

A:Screen too dim

Information needed: Make and Model of computer / motherboard / video card / monitor / etc.
Cannot help if no information is available about what you are using. What Operating System are you using?
 

http://www.techspot.com/community/topics/screen-too-dim.208130/
Relevancy 15.91%

Hi there I ve recently bought a second hand laptop because it was cheap and seemed to only have a minor problem which I hope to be able to fix So far problem TK Easynote boot Bell Packard I ve not been able to so I thought I d ask here for Packard Bell Easynote TK boot problem some help Specs Packard Bell Easynote TK CPU AMD Phenom II X N GHz Videochip AMD Radeon HD M GB VRAM RAM GB DDR orginal OS Windows Home Premium So the problem is that if I try to boot it Packard Bell Easynote TK boot problem about times it starts up I can hear the fan and HDD starting and see the lights turn on Then after a couple of seconds before seeing anything on screen I hear the fan stopping while the lights remain on The times it boots up properly and everything works What I ve Packard Bell Easynote TK boot problem done so far remove battery and power adapter reinstall RAM both at once and one by one hold down power button for a minute and try again with the power adapter connected This doesn t appear to do anything much I haven t removed the CMOS battery yet because it s embedded in a peculiar way and I m not familiar with how to remove it yet Then during one of the few sessions where I was able to boot successfully I installed the newest BIOS-version from the Packard Bell site This also didn t do anything Then since I wanted to do it anyway I started with the installation of Arch Linux where so far I ve only wiped the entire HDD and repartitioned it then I was too busy and couldn t complete it This doesn t matter much as long as I can get into the BIOS properly I ll be fine I m a Linux newbie but have successfully installed Arch Linux on a very old laptop So what I wanted to ask do you know any way to make the startup work everytime Do you have any ideas what it might be My theories so far - It s probably a hardware related problem since it still occurred after BIOS-update and full HDD-wipe without OS - broken powerbutton connection somehow -- gt replace powerbutton - broken fan overheating -- gt shutdown - broken fan cable sometimes does connect correctly I m curious if you have any theories on how to save the laptop Kind regards Ilja nbsp

A:Packard Bell Easynote TK boot problem

The laptop may need its thermal pads or paste replaced. The motherboard may be detecting a false over-heating signal...
 

http://www.techspot.com/community/topics/packard-bell-easynote-tk-boot-problem.207489/
Relevancy 15.91%

Hi all. I've got this issue with my graphic card (fresh and crispy by the way - 1 month old). Few days ago I was just browsing web when suddenly blue screen came out of nowhere on my Windows 8.1 desktop PC. Ever since then when computer boots screen is filled mozaic-like with green squares, after few seconds it's changing to vertical lines. Obviously Windows window manager won't open at all, and it greets me with black screen. After I deactivated graphic card, and switched cable to main boards VGA port computer runs ok.

I've seen some similar threads on techspot suggesting that due to escessive dust 'consuption' GPU can overheat and irreverisbly burn therefore. Is it possible that the same thing occured here?




 

A:Green squares on computer boot, Nvidia GTS 250

It's what I've seen on the screen when one of my graphics cards has died. As it's almost new changing it shouldn't be a problem. It's more likely to be a faulty graphics card than dust. Double check that it's seating properly in its port and that the video cable is OK.
 

http://www.techspot.com/community/topics/green-squares-on-computer-boot-nvidia-gts-250.208163/
Relevancy 16.34%

Hi there! I was wondering if any of you tech heads can help? Been given my nephews laptop which had the vague description of it hasn't turned on in a couple months.

It's a zoostorm loaded with windows 7. I can get into the bios but after that it just sits with a black screen. Any help would be appreciated.

Steve
 

http://www.techspot.com/community/topics/laptop-failing-to-boot.208148/
Relevancy 30.96%

Have an unusual mark on screen at startup then green lines and pink but otherwise pc ok cannot upload jpeg image for some reason
 

http://www.techspot.com/community/topics/screen-issue-dell-1520.208131/
Relevancy 52.46%

I have a Packard Bell Easynote TE69KB laptop and the screen is either black or very dark, sometimes at the right angle you can just see the graphics, This started after the 18mth old son hit the top of the screen yesterday. I have tried adjusting brightness without change, with an external monitor plugged in it works fine, which is OK if I'm working at home but no good when I'm out. I am thinking I'm going to have to change he screen or can you make any other suggestions?
 

A:Very dark or black laptop screen

Your son has probably damaged or loosened the screen inverter. That is what lights up the screen and is a separate part. It can be found under the screen bezel. I don't think that this will cost much to fix. If you DIY read up about the job first because removing the bezel (frame) needs to be done carefully.
 

http://www.techspot.com/community/topics/very-dark-or-black-laptop-screen.208064/
Relevancy 21.07%

Hi, I have a MSI g31m3 v2 s-7529 motherboard and wont turn on.
I change the power supply
I put on some themical paste in the cpu
I put away all hard drivers
but didnt work, only the fan turn on then its turn off
I think the motherboard dosent work.
 

A:Motherboard wont turn on

Please provide list of make and model for everything you have for this setup (CPU, RAM, GPU, Hard Drives, Optical Drives, Power Supply, Aftermarket coolers, etc.). We need to make sure that you have all compatible parts.
Also, have you tried to disconnect all things except the power supply connection to the motherboard, CPU & RAM and see if the motherboard starts?
 

http://www.techspot.com/community/topics/motherboard-wont-turn-on.208015/
Relevancy 21.93%

Hello everyone I m having a problem that I cannot understand at all with my old Acer AL W monitor As I turn on the screen it shows whatever it is recieving for about one second then goes black but still getting the goes black Monitor signal The only thing that makes it show anything again is to turn it of then on again and the same thing happens It shows what it s recieving for a second and goes back to Monitor goes black black It has not shown any messages of not recieving a signal but the screen stays black I can t even use the monitors own menu since that is blacked out too I don t wan t to replace it Monitor goes black though that s what I think must be done in the end so I had to post it here for all of you who know much more than I do Here s what I ve tried so far with no luck the same problem in every scenario changed port on GFX Changed cable Tried connecting it to another GFX the onboard port and another PC Tried disconnecting power to monitor and holding the power button before retry Thanks for your time nbsp

A:Monitor goes black

Looks like u need a new monitor, I say it is worn out. do not get me wrong some can last for 10 to 20 years and others will fail in a year.
 

http://www.techspot.com/community/topics/monitor-goes-black.208011/
Relevancy 21.07%

Now I got a new problem on my dell Latitude E6410, I install windows 7 ultimate 64bit, and instal all upadates, its works fine, but when I plug in or plug out charger pin there is appear total black screen for a moment, I tried power settings and so many things about graphics but fail, if anyone have a solution then tell me, I'll be glad.
 

http://www.techspot.com/community/topics/dell-latitude-e6410-black-secreen-on-charging.207887/
Relevancy 52.03%

I come here in need of some help I ve been troubleshooting this issue for quite some time and have not been able games goes while few a for seconds playing Screen black to find the solution on my own The issue Sometimes when I play games my screen Screen goes black for a few seconds while playing games will go black at a random time for a a period of time sometimes only lasting - seconds other times lasting up to a minute and then recovers itself and I m able to continue playing The sound continues playing during the black outs but I have no control of my computer Can t see anything and cannot use commands like ctrl alt del Sometimes when my computer recovers from the black screen I can hear the fans on my GPU boost up to about I have setting in MSI afterburner to Screen goes black for a few seconds while playing games increase my fan speeds as the temperature of my card goes up Sometimes when recovering from a black screen my fans will go up from to like Then it stays at for the remainder of the time until I reset my computer Once my computer is reset my card will run at the again Background and computer information This issue did not start happening until I installed and new graphics card and reinstalled windows The GPU was tested before I reinstalled windows and everything ran perfect no blackouts I reinstalled windows because I got an SSD here are my specs as of now CPU FX- MOBO Asrock Extreme RAM gb DDR and gb DDR SSD gb w windows installed on it GPU Radeon r upgraded from a radeon which ran perfect PSU w Corsair few last things to add that may be helpful - I have not experienced any black screens when using my computer and not playing games - I typically play low-end games like league of legends which aren t too intensive on the gpu - When I load into the UEFI my RAM displays as all sticks running at MHz Even though of my sticks are - my gpu has never gone over degrees since ive installed it so I dont think its an over-heating issue If you need any other information let me know and ill be happy to provide it Any help will be EXTREMELY appreciated I m going crazy right now because I can t figure this thing out lol Thanks so much - Nick nbsp

http://www.techspot.com/community/topics/screen-goes-black-for-a-few-seconds-while-playing-games.207781/
Relevancy 16.34%

So I ve owned my P HM gaming laptop for around years now and for the most part I haven t had any issues However when I start my laptop it always defaults to booting off of the ethernet card even after switching my SSD to the position in the bios menu Normally this isn t that much of an issue as I can just cycle through the bios boot options using CTRL Laptop Boot issue ALT DEL The main issue that I am having now is that the last time I was using my laptop I used hibernate instead of the normal quot sleep quot or quot standby quot Now whenever I attempt to start my laptop up the message quot Resume from hibernate quot is on my screen which is normal except it tries to resume using the ethernet card If the laptop is in hibernate evidently I am not able to access the BIOS menu or cycle through my boot drives I have read that a way to fix this Laptop Boot issue might just be taking the battery out and letting any residual power that the motherboard might be running off of fade away over time I read that this normally only takes minutes or so I tried waiting minutes and it Laptop Boot issue didn t work so I just tried again but waited a few hours this time before putting the battery back in and attempting to start my laptop up The laptop is still attempting to boot from hibernate Does anyone know of any way to get to the BIOS menu from the hibernate screen Or does anyone know of anyway to fully shut off my laptop Laptop Boot issue to get rid of hibernate and just start up normally Any assistance would be greatly appreciated nbsp

A:Laptop Boot issue

it always defaults to booting off of the ethernet cardClick to expand...

This means that BIOS is not seeing any HD, marked Active and contains a bootable partition
 

http://www.techspot.com/community/topics/laptop-boot-issue.207645/
Relevancy 30.96%

I just purchased screen quot DELL U H quot and a new computer The happy unboxing time turned to a nightmare when the noob I am could not connect the screen to the computer like the guy is doing in the youtube video Thanls Screen Info http accessories us dell com sna productdetail aspx c us amp cs amp l en amp sku -BBCG What I am trying to do This guy is connecting his screens to each other than to the PC but I am unable to achieve it 3 station configure screen my working Can't My Computer Spec Asus ROG G Desktop PC i Can't configure my 3 screen working station GB TB NVIDIA GTX - CPU Intel Core i - M Cache up to GHz - VGA NVIDIA GTX GD - OS Windows - Memory G DDR MHz - Storage TB SATA G ASUS Can't configure my 3 screen working station westorage years - ODD Blu-Ray X Combo - LAN Mbps - Audio -channel Audio SonicMaster - Card readerN A - Front I O - USB x - Mic Port x - Earphone port x - back I O x RJ LAN x HDMI-Out - x channel Audio - x USB x USB - x Power jack - power supply WAdapter - certificates BSMI CB CE FCC UL CCC Energy Star VCCI Graphic Card Spec http www asus com Graphics Cards GTX PHOC GD specifications nbsp

A:Can't configure my 3 screen working station

As far as I can tell, Nvidia doesn't support Surround (three monitors) via daisy-chaining (the card in the video was AMD Radeon). You might be able to get two monitors to work like that - some sort of DisplayPort MST support was added a while ago because of tiled 4k displays - but to get them all working they need to be plugged to the card directly.

As GTX750 doesn't have proper connectors, you might need to change your graphics card to something that has three DP outputs or 2xDP + HDMI.
 

http://www.techspot.com/community/topics/cant-configure-my-3-screen-working-station.206802/
Relevancy 53.32%

I run two displays. When I got up this morning, one of them is on but black. When trying to adjust my display settings, it comes on briefly (maybe 3 seconds) and goes right back off again.

System specs are as follows:

Operating System
Windows 7 Home Premium 64-bit SP1
CPU
AMD Athlon II X2 255 45 C
Regor 45nm Technology
RAM
4.00GB Dual-Channel DDR3 @ 535MHz (7-7-7-20)
Motherboard
eMachines EL1352 (CPU 1) 49 C
Graphics
VE205 ([email protected])
VE205 ([email protected])
256MB NVIDIA GeForce 6150SE nForce 430 (Acer Incorporated [ALI])
Storage
465GB Western Digital WDC WD50 00AAKS-22V1A SCSI Disk Device (SATA) 48 C
Optical Drives
ATAPI DVD A DH16ABSH SCSI CdRom Device
Audio
USB Audio Device

Using Sabrent USB-DH88 USB Display Adapter also

I have checked all drivers and windows shows they are up to date. Both displays were fine as of about 1 AM this morning, and to my knowledge no updates or downloads were done during this time.

Any help would be appreciated; I work from home and having dual monitors is almost critical.
 

A:2nd display black screen

Try changing cables first, by some chance the cable has gone bad.

Sounds like it could be a lighting issue within the monitor. If it is a backlight issue, the monitor will still be displaying an image. You will not be able to see the image without some kind of lighting. If you can use a flashlight to expose the image, you would at least know it is a backlighting issue. I've been able to use this technique on phones as well as monitors.
 

http://www.techspot.com/community/topics/2nd-display-black-screen.207214/
Relevancy 30.96%

So recently my laptop computer s screen has been exhibiting very odd behavior At random times and puslates out Laptop spazzes screen at random intervals the screen will suddenly begin to pulsate and Laptop screen spazzes out and puslates quot spazz out quot if you will The spazzing is a burst of bright pulsating pixels that either partially or completely obscure the picture on the screen When this first started happening they never lasted for more than a fraction of a second but they are becoming much longer There seems to be nothing that I do in particular that causes this It doesn t necessarily happen when I for example play a game with intense graphics Nor does it necessarily happen when my computer is hot I have a core thermometer installed to prove this It doesn t seem to specifically be caused when I move the computer around Recently the quot attacks quot have been getting more frequent and more violent but I m just not sure what causes it An attempted screenshot of the issue returned a normal-looking screen so I don t think it s a virus Here s a YouTube link to a video I caught of it The pulsating starts at Sorry about Brand New in the background Computer Model ASUS Notebook K E Processor Intel R Core TM i - M CPU GHz Installed Memory RAM GB GB usable System type -bit Operating System Thanks for your help nbsp

http://www.techspot.com/community/topics/laptop-screen-spazzes-out-and-puslates.206769/
Relevancy 21.07%

So I recently purchased a gtx 780 SC with the intention of gaming and doing 3d modeling work and game development with maya/blender/unreal engine 4. Originally, I was thinking of starting with the 780 and maybe a little later get the mid range quadro k4000 to use specifically for the 3d modeling work. I was wondering if just purchasing a GTX titan black with its double precision floating point performance would be a better option? Doing this would be around 100-150 cheaper and I would be able to game and do 3d modeling work with one card. I guess my main question is does the titan black compare with the quadro card mentioned above in terms of 3d modeling? I know the K4000 is a mid-ranged card so I wasn't sure if the titan maybe would do even a little better than the k4000? Any help appreciated.
 

A:Titan black or GTX 780 + Quadro K4000 for 3d modeling/gaming

boagz said:





So I recently purchased a gtx 780 SC with the intention of gaming and doing 3d modeling work and game development with maya/blender/unreal engine 4. Originally, I was thinking of starting with the 780 and maybe a little later get the mid range quadro k4000 to use specifically for the 3d modeling work. I was wondering if just purchasing a GTX titan black with its double precision floating point performance would be a better option? Doing this would be around 100-150 cheaper and I would be able to game and do 3d modeling work with one card. I guess my main question is does the titan black compare with the quadro card mentioned above in terms of 3d modeling? I know the K4000 is a mid-ranged card so I wasn't sure if the titan maybe would do even a little better than the k4000? Any help appreciated.Click to expand...

As far as 3D modeling goes, the biggest thing you will need is ram on the card for the blender and 3D modeling aspect. Some programs are specifically limited to the Quaddro series of cards which means you will have to check if the programs you use will work with any GPU.

Basically, I would say either just get a 780ti 6gb edition (Being released this month I believe) if your programs will all work fine on the GTX series of cards. Or if that won't work, you should be fine with the 780 and grabbing a Quaddro series card to go with it. I would say only get Titan black if you really need the extra compute performance it brings because otherwise its expensive and still would end up being better in my book just getting an K4000 with your 780 since you already own the 780.
 

http://www.techspot.com/community/topics/titan-black-or-gtx-780-quadro-k4000-for-3d-modeling-gaming.201518/
Relevancy 30.96%

My laptop goes into sleep mode even on slightest jerk applied on screen to rotate it,what possibly could be wrong, and on repairing how much could it cost
 

A:Laptop going into sleep on bending the screen

Sounds like a fault somewhere in the wiring (or a "switch" that is located inside the hinges for the laptop screen. Not 100% sure but without knowing make and model of your laptop, it is my best guess.
What you can do is the following:

Select "Power Options" in the "Control Panel" list.

Click the plus sign next to "Power buttons and lid" to expand its sub-list.
Click the plus sign next to "Lid close action" to expand its sub-list.
Click the word "Sleep" to open a drop-down menu next to the power plan you wish to adjust (e.g. Plugged In). Select "Do Nothing" from the drop-down menu.
Click "OK" to save your settings and exit the window.
This should disable the sleep option, then you wont have to worry about it until you can get it fixed properly.
 

http://www.techspot.com/community/topics/laptop-going-into-sleep-on-bending-the-screen.206467/
Relevancy 20.21%

Hi,
So I have noticed my pc would shut off randomly and its because the 24 volt connector wasn't in all the way so when the pc would move slightly the connector would disconnect itself. When I go to push the 24 volt in all the way it wont clip onto the clip on the motherboard. It will stay in but it wont fully go in and I can easily just pull it out or it will just fall out from movement. Any ideas how to fix this?
Motherboard- http://www.newegg.com/Product/Product.aspx?Item=N82E16813130741
PSU- http://www.newegg.com/Product/Product.aspx?Item=N82E16817139026
 

A:24 Volt connector wont fully connect to Motherboard

I think it is not 24 volts. it is a 24-pin(also labelled as 20+4pin) , 12volts main power connector.
the slots are designed so that the power connector will slide into the slot to form like a 'lock and key'. to remove it.
see to it that the power connector is inserted in the right direction as shown in the pics (towards the side):


edit, any moderator: please delete this post.
(my second post to this thread is more 'presentable')
 

http://www.techspot.com/community/topics/24-volt-connector-wont-fully-connect-to-motherboard.206189/
Relevancy 21.07%

My new build wont power on all I hear is a few high pitch sounds coming from what I think is the psu.
My specs:

SSD 128GB SAMSUNG 850 Pro
1TB HDD (from previous build it was working fine 2 days ago)

2TB HDD(from previous build it was working fine 2 days ago)

GPU = GTX 680 2GB (from previous build it was working fine 2 days ago) MSI GTX 970 GAMING 4G GeForce GTX 970 4GB 256-Bit on it's way in the mail.

Case is pretty old and doesnt have a lid but it was working fine with my pervious buid)

PSU = CORSAIR Enthusiast Series TX750 V2 750W ATX12V v2.31/ EPS12V v2.92 80 PLUS BRONZE Certified Active PFC High Performance Power Supply (from previous build it was working fine 2 days ago)

Heatsink = Scythe Ashura Universal Processor Cooler

CPU = Intel Core i7-4790K Haswell Refresh Quad-Core 4.0GHz

Motherboard = MSI Z97-Gaming 7 Intel Z97 Motherboard

Memory = CORSAIR Vengeance 16GB (2 x 8GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory

Please help me
 

A:New build wont power on

Disconnect everything except the monitor, cpu, ram. In fact, go down to 1 stick of ram. Will it POST now?
 

http://www.techspot.com/community/topics/new-build-wont-power-on.206021/
Relevancy 52.46%

Just bought a 980, now all I get is a black screen no matter what GPU I use.
Here are my specs:

Operating System
Windows 8 Pro 64-bit
CPU
Intel Core i7 4770K @ 3.50GHz 25 C
Haswell 22nm Technology
RAM
16.0GB Dual-Channel DDR3 @ 800MHz (9-9-9-24)
Motherboard
MSI Z87-GD65 GAMING (MS-7845) (SOCKET 0) 30 C
Graphics
L204WT ([email protected])
Intel HD Graphics 4600 (MSI)
Storage
465GB Samsung SSD 840 EVO 500GB (SSD) 28 C
119GB SanDisk SDSSDHP128G (SSD) 28 C
1863GB Seagate ST2000DL003-9VT166 (SATA) 28 C
1863GB TOSHIBA DT01ACA200 (SATA) 30 C
Optical Drives
CZYJMF MJW5MF4 SCSI CdRom Device
PIONEER DVD-RW DVR-221L
Audio
Sound Blaster Z

I had an EVGA 780TI working great. My 980 arrived so I swapped. All I got was a black screen. After taking the card out and putting it back in a few times nothing changed. Giving up I put my 780ti back in and now that just gives me a black screen too.

Any ideas?
Thanks

Edit: My mobo gives the code A0 which is normal so I don't think it detected anything was wrong.
 

A:Just bought a 980, now all I get is a black screen no matter what GPU I use

If your not getting an error code its probably booting up normally. It maybe defaulting to the integrated card for some reason so I would try plugging onto the on board video when booting to see what happens.

If that is the case you will just have to go into the bios and change your default video card to the PCIE.
 

http://www.techspot.com/community/topics/just-bought-a-980-now-all-i-get-is-a-black-screen-no-matter-what-gpu-i-use.205925/
Relevancy 31.39%

A few days ago my laptop started doing something weird - I would watch a video on YouTube or browsing the internet when my screen would glitch out and then I am not able to do anything. Most of the times the laptop will keep on running but the screen is frozen. Yesterday I even got blue screen after that happening.

Those are the specifications. I am using Windows 7 Proffesional. My GPU is Nvidia Geforce 525M 2GB + The the graphics card that comes with the processor
 

A:Laptop screen glitches

What antivirus program are you running?
 

http://www.techspot.com/community/topics/laptop-screen-glitches.205605/
Relevancy 21.5%

This build will be for my 77 year old mother who lives in another state and I am trying to build this as stable and problem free preventative mode as best as I can with the understanding that any hardware can fail at any time.

Anyway, NewEgg is having both their Blue and Black WD 1TB hard drives on sale that goes off of sale after tomorrow. I know Black is often the choice due to build quality and 5 year warranty. However, the Blue would really help budget wise because every dollar counts and it sees many people have had good success with the Blue.

She does MS Office, email, surfing plus she has an online business that keeps her very busy along with uploading a lot of photos.

Thanks.
 

A:New Build: Western Digital Blue or Black?

Blue. Because of her work tasks.
 

http://www.techspot.com/community/topics/new-build-western-digital-blue-or-black.204928/
Relevancy 21.93%

Ok so I got this computer it works great! until I try to game the only game that works is Fable TLC (it works for all games) all other games the monitor goes black for a few seconds so I cant play any games really. how do I fix this without spends tons of money on parts? everything works fine even others have no problem see things thru remote access im the only one that's having the issues. brand new tower and monitor.
 

A:Monitor goes black for a few seconds

Can you give us your hardware components such as the make and model of your power supply and the watts, amount of RAM, your cpu, and video card? Is this a new system?
 

http://www.techspot.com/community/topics/monitor-goes-black-for-a-few-seconds.204797/
Relevancy 16.34%

Hello everyone Been having some crazy stuff going on with this new PC that I just built I cannot get it to startup at first try I just get a black screen and the BIOS welcome try always doesn't first second/third at (but does try) up PC boot at doesn t show up and neither does the windows startup loading of course When I manually restart it Power Button long press it runs just fine I have read that thousands of things could be potentially causing this from Hard Drive to Power Supply to graphics card but my actual bet is on RAM voltages overclock causing it since I recently overclocked it via BIOS setting the default frequency at mhz which is what my RAM offers at maximum and the max that my Motherboard can read The actual voltage is set to auto via BIOS which stays at V so I m not sure if lowering or raising it will solve the problem XMP is disabled not sure if that s relevant My BIOS is up to date My graphics card is old I m planning to change it soon but I didn t have any problem in the past with it Hard drive is also old but runs just fine I m open for any suggestions Specs - Tacens Mars Gaming W power supply - AMD FX- Eight-Core - PC doesn't boot up at first try (but always does at second/third try) MSI Gaming Motherboard http thepcenthusiast com msi- PC doesn't boot up at first try (but always does at second/third try) -gaming-am -motherboa - XFX ATI Radeon HD GB DDR - G Skill Ripjaws X DDR PC - GB CL x modules of GB Dual channel in slots amp - Hard Drive SATA II WD EADS- M B TB - Win - bit Some screenshots CPU-Z confirms I m running at mhz MSI Command Center does not get accurate frequency readings Thanks in advance for all the help If I forgot to mention something please tell me nbsp

A:PC doesn't boot up at first try (but always does at second/third try)

Check and make sure the wire cables are connected properly and not loose. Also, can replace CMOS battery and see you may able to access your computer.

P.S. Also check that the hard drive connection is set to UEFI under BIOS connection settings. Windows 8/8.1 supports only secure booting.

Good luck though!!
 

http://www.techspot.com/community/topics/pc-doesnt-boot-up-at-first-try-but-always-does-at-second-third-try.205119/
Relevancy 21.07%

Hi guys im new in the forum don t ON PC wont stay know PC wont stay ON if I can start threading right away but here goes My setup k stock ASROCK Z pro x gb of gskill ripjaw HX WD Black gb PC wont stay ON SG gb Shappire My problem started quite a while ago with another motherboard one day I started my PC and it just wouldn t boot it ran for about - sec and then it would shut off infinite loop So PC wont stay ON at the time I just swapped my HX psu for a temporary w one and it was all ok apart from having to take the gpu out since this psu wouldn t handle it Then that motherboard burned and I swapped it for a brand new one z pro At the same time as I got the new board I went to a electronic repair shop with my HX psu since I was sure it was broke And a week later they call me to go get it back and the guy tells me shes in perfect condition which was very awkward since ive been messing around with computers for years and I usually dont make this sorta stupid mistake I thought well maybe it was the previous board Even if she did work with the w PSU it didnt really make any sense but I thought wtv lets give it a try anyway Got home got it running and voila works perfectly For TWO days After those two days with a new board and the rest of the same components the PC went back to the same simptoms it would power on and off for seconds and loop and loop Again I switched to the old w psu and it works perfectly Went back to the store they tested it and swap some internal components just to keep it safe and deliver it to me saying it ran for days without a hiccup with HDDs and a bunch of different OS s If that even mattered So I got back home tested it and hurray its finally over its running perfectly and im playing a bunch of games without any problems But its been two days Wont boot LOOP LOOP Same old story HX wont work and im back to the w psu Any ideas Im out of options this makes sense Thanks in advance nbsp

A:PC wont stay ON

I would rather think the PSU is bad. Your best bet would be to invest in a new one. This more or less would save time and the problems you are having. Plus the expense of repair a PSU that keeps failing.
 

http://www.techspot.com/community/topics/pc-wont-stay-on.205436/
Relevancy 20.64%

Laptop wont load bios or OS Interesting wont load Laptop bios OS or issue here When I press the power button the HD activity led light comes on for just a second I feel the HD spinning up and running the fan kicks in and runs then nothing No Laptop wont load bios or OS leds flahing just power led no beeps no screen and no bios I v discharged static build up battery out power button held down quot and tried both mains amp battery to no effect There were no precursors to this issue So I can deduce the laptop is unable to complete POST in pre bios despite the lack of beeps yet can supply power to fan amp HD Now the GPU is Laptop wont load bios or OS GForce m GS aware of the issues with the xxx series I v kept the air flow clean and use a laptop cooler Possible suspect though it never ran hot and all worked fine till I turned on a couple of Laptop wont load bios or OS days ago Now I understood that a failure of the xxx series usually presented a degraded screen lines etc rather than failing post I m backed up and use my second laptop so nothing urgent just a oportunity to learn I am interested in hearing from hardware geeks and their thoughts nbsp

A:Laptop wont load bios or OS

Seem to have been redirected here for some unknown reason !!
 

http://www.techspot.com/community/topics/laptop-wont-load-bios-or-os.205327/
Relevancy 20.64%

My internet wont work, ive tried using both crome and IE but both browsers say that I am not connected to the internet despite the fact my computer says that I am connected to the internet. I know its not a network problem because my other devices are connecting fine. Also I tried connecting to the wifi at home and at school and it still does not work. My laptop is a HP ProBook 6390b and I am using windows 7. This problem started occurring after about 4 months disuse of my laptop which I think might be a factor as to why its not working. I have run windows updater and run a scan with my antivirus but still nothing helps. Thank you for any assistance in advance.
 

A:Internet wont work on laptop

Have you kept up and installed all the Windows 7 updates and are there any yellow (!) in the device manager?
 

http://www.techspot.com/community/topics/internet-wont-work-on-laptop.204944/
Relevancy 30.96%

I am now working on a ASUS G jh I ll describe the problem from when I first acquired the laptop The laptop started up with a blue BIOS background eventually the OS started Very lightly and blue tinted After playing around I discovered that the problem was intermittent when changing the elevation of the LCD lid I ordered NEW LCD Video Cable For Asus G G JH G JW G J G SW SERIES - Q ASA http www ebay com itm trksid p m l amp ssPageName STRK MEBIDX IT thinking this would fix the problem It did not Since then I have tried one different LCD panel and get the same results Now the problem is no longer blue It s just dark very very dark I can see that it still sends the image to the screen but it looks at if it s Asus G73jh problem screen the older LCD panels with the backlight disabled I know that this does not have a backlight or inverter though I have reinstalled Windows reinstalled the drivers reinstalled CCC still having issues maybe this is related AMD Catalyst fails to load properly The error message is quot Catalyst Control Centre Command Line Interface has stopped working quot It seems maybe there is something wrong with the graphics processor but I currently have a monitor connected through VGA and have also tested the HDMI output and both work fine I have been using and testing this system Asus G73jh screen problem with the external monitor since I have disassembled the laptop to replace the LCD LED cable I no longer have the old cable Anyone with any tips I would really like to figure this out if not for a working laptop for the curiousity of knowing what caused the problem Please help I will appreciate it very much nbsp

A:Asus G73jh screen problem

Is the display panel an LCD or LED type? Many LCD laptops can be converted to LED by using a simple flat cable adapter...
 

http://www.techspot.com/community/topics/asus-g73jh-screen-problem.205184/
Relevancy 20.21%

Hi can any one help I cant hear any sound on my laptop its all turned up but when I conect it to my tv the volumes fine but soon as I disconnet from the tv the sound ont go.
 

A:Audio wont work on asus x53u laptop

Did you fix this?
 

http://www.techspot.com/community/topics/audio-wont-work-on-asus-x53u-laptop.204577/
Relevancy 51.6%

Hi, I'm having a problem with my Dell Latitude E6400. When I'm not using it for a while the screen goes black (like into a sleeping mode) like all computers and laptops do. But if it stays black for a little while, and when I go to get back on it and move the mouse around or press the keys the screen won't turn back on but the computer is running because the light on the keyboard are lit up and I can hear the fan running. The only way I can get the screen back on is if I shut it down by pressing the power button on my keyboard and turning it back on.

Can anyone please tell me what to do or what is wrong with it. That would be much appreciated. Thank you

Being thirteen doesn't mean I don't know what I'm talking about.​
 

http://www.techspot.com/community/topics/latitude-e6400-screen-goes-black-after-not-using-and-wont-turn-back-on.204671/
Relevancy 30.53%

I am running Windows 8.1. After restarts, the laptop screen would be blank, yet the computer would load. If I hooked up a 2nd monitor, it would show the desktop on that screen but laptop screen blank.

Now when I try to type on that computer (I'm currently on a different computer) the typing of the keys is all off (none of the letters actually type what they are supposed to and some open up random windows and command prompts)

I am wondering if this is a virus. Currently running Malwarebytes. I did a system restore earlier and the problem wasn't solved.
 

A:Blank Screen error and typing issues

Could be a virus, but could also mean the motherboard is faulty. If still in warranty, RTM.

Does the laptop have a bootable CD reader? If so, then download and make a bootdisk of a small linux (e.g. puppy linux). Booting off that will virtually prove if the motherboard is faulty or not.
 

http://www.techspot.com/community/topics/blank-screen-error-and-typing-issues.204596/
Relevancy 20.64%

As the title states I cant seem to get my monitor to turn on when I put ram in slots 3-4.. I currently have 2x2gb ram installed and im trying to install 2x1gb more(in slots 3-4)
both sets are matching pairs

Any suggestions?

CPU: amd phenom ii x4
GPU: Radeon hd 7700
MOBO: Gigabyte M720-US3
64 bit*
 

A:Monitor wont turn on with ram in slots 3-4

What's the timings, frequency, and voltage on the RAM sets?

Also confirming, that you are putting them into matching ram slots? 3-4 tells me nothing and can be misunderstood anyway.
 

http://www.techspot.com/community/topics/monitor-wont-turn-on-with-ram-in-slots-3-4.204476/
Relevancy 30.96%

Hi, hope I've put enough specs in profile for you to help. I have a Compaq Presario 6735s I bought around 2008. CPU quite slow but graphics card not bad so made decision to upgrade. Looked up the laptop manual here to find compatible CPUs for motherboard, socket type etc. Went through 3 different (*****ic) buys before I found one that actually fitted.
Now with everything reassembled, screen will flash up once upon powering on, then nothing. All usual lights come on, even my wireless connects, makes usual start up noises, fan, dvd drive etc ....
Proceeded to take everything apart again, re-connected everything I tampered with. Even RAM, which I didn't have to remove before.
Still same reaction starting up.

Really frustrated with myself as thought this would be the right one. Could honestly cry, haha.

I read the tutorial on here called 'No POST' to no avail either. I really hope it can come back from this.
One last thing I can think of (before pulling new CPU out) is upgrading BIOS to support new CPU but with no screen I am stuck.

Can someone please give me a little direction?
 

A:Upgraded CPU on laptop, now screen won't work

Did you re-install the old CPU to see if the laptop booted normally again? Upgrading CPU's on laptop motherboards can be a very difficult thing to do. What is supposed to be compatible in reality is not
 

http://www.techspot.com/community/topics/upgraded-cpu-on-laptop-now-screen-wont-work.204383/
Relevancy 27.52%

One of my hard drives just failed after years of reliable service. A lot of valuable information was lost.

To avoid this in the future, it would be helpful to know just how old a drive is to know when it's time to be replaced.

Is there a program that can tell me when I drive was manufactured?
 

A:A program that shows Manufacture date?

Drive age doesn't really have much to do with 'drive failures'. Time in service increases the risk, but it's not a defining factor either.

The HDD should have a sticker on it showing date of manufacture. I don't know of a program.
 

http://www.techspot.com/community/topics/a-program-that-shows-manufacture-date.204415/
Relevancy 20.64%

So my laptop will not connect to the internet only by the ethernet cable. Ive made sure my wifi is on but for some reason everytime I click troubleshooting it will only tell me to try to connect to the ethernet cable. I tried to find different interney connection or try to disconnect to my router but that option does not even show up.

Ive gone through device manager n unstall things like the newtwork adapter of course after I restrted the computer itll reinstall it. Ive tried the options of restarting the router try to turn off the wifi restarting a an d reconnecting. Please help!! Lol
 

A:My laptop wont connect to the internet

I have a laptop and use wired connection when at home. Laptops typically have an enable/disable key or switch for the wifi - - on my Dell, <fn>F2 toggles wifi on/off.
I normally run with it off and the device manager looks like this



EVEN when F2 has it disabled! Notice, no red/yellow flags because it's just fine.

The system tray (for a wired connection) looks like



and IF I enable wifi, it changes to



*** SO BE SURE your wifi is 'enabled' (that is not the same as the device mgr enbled)
 

http://www.techspot.com/community/topics/my-laptop-wont-connect-to-the-internet.204212/
Relevancy 31.39%

A few days ago I bought some screenwipes to clean my monitor screen & iPhone screen. They worked great on my iPhone & laptop but when I did my W7 tower I felt bumps which are from un expected sneezes & would like to know if there is another way to clean that off or if I'll just have to use more than one wipe.
 

A:Cleaning my monitor screen

You just have to put some muscle into it! I had the same sneeze marks on my screen from over the years and a bit of elbow grease was the key.
 

http://www.techspot.com/community/topics/cleaning-my-monitor-screen.204176/
Relevancy 31.39%

Hi all,

So I managed to drop my laptop Satellite C870 - 15K to the floor. It cracked my screen (see attached) so I'm thinking of replacing the screen myself. However before I purchase the screen I wanted to make sure the laptop is still working.

When I try to connect it to my TV through HDMI to verify if the laptop is still function I get no image. I thought maybe it's in standby mode or something so I removed the battery and tried again without luck. When I start up the laptop it sounds normal but I don't hear any windows sound or anything. Any advice on how to continue?
 

A:Broken Toshiba LCD screen

Pull off the bottom access panel(s) and make sure the memory and hard drive are seated properly by removing them and re-installing them. It is also possible that the broken screen is shorting out the motherboards video. Try connecting the TV after you remove the LCD panel. One more thought... you have pressed the proper F key to activate the external video port?
 

http://www.techspot.com/community/topics/broken-toshiba-lcd-screen.203601/
Relevancy 29.67%

Recently a hard drive named OS (X: ) (space inserted so it isn't posted as a smiley face) appeared in my computer. It seems to be identical in memory to my actual hard drive, but is actually empty. What exactly should be done about this?





 

A:Empty extra hard drive?

Not sure off hand but I'd open up Disk Management to see what it says there.
 

http://www.techspot.com/community/topics/empty-extra-hard-drive.203533/
Relevancy 30.53%

I turn-on the power on my laptop and all I see is a cycle of Red, Green, Blue, White, & Black of color on my screen. Computer was working the night before. I do not know much about troubleshooting a computer. Can anyone please give me an advice or guide if this is something I would be able to tinker to work or bring the laptop over for service.
I have a Dell XPS1730 (5 years old) with Nvidia IUPGA5D G84. Recently, upgraded to Windows 7
I appreciate your assistance.

Thanks.
Daire
 

A:Laptop screen flashes RGBWB color upon power-up

The internal video has died. To verify this you can attach an external monitor and see if the display is normal
 

http://www.techspot.com/community/topics/laptop-screen-flashes-rgbwb-color-upon-power-up.203382/
Relevancy 31.39%

Can anyone help,
I have a compaq presaio cq61

the other day the screen went dark, could just see the screen in the background, scrolled through forums and decided that it could be the inverter.
Purchased and fitted a new one screen lights up fine but now is continuously pulsating. Does anyone have an idea on this, could it be the wrong inverter? or other problems.

Your help in this would be extremely appreciated.
 

A:Laptop screen pulsing

The LCD panel could be bad...
 

http://www.techspot.com/community/topics/laptop-screen-pulsing.203088/
Relevancy 20.21%

So I have windows 7 installed on my pc ..... I cant hear any sound from my headphones or speakers whether plugged into the front or rear panel. and also windows shows that there are headphones plugged into the front panel. maybe that's the reason I cant hear any sound....but I tried all possible ways....also disconnected the front panel from the motherboard but still it says its connected.
 

A:Front audio jack panel wont disconnect in any way

Have you checked out the Sound section in Control Panel. Also check Device Manager.
 

http://www.techspot.com/community/topics/front-audio-jack-panel-wont-disconnect-in-any-way.202869/
Relevancy 30.53%

I have a Dell Latitude D that I dropped while in its carrying bag so even backlight Dell screen Latitude replacement no after it wasn t a real hard landing Now the backlight won t come on I swapped an entire screen assembly from an identical D and it still won t turn the backlight on I swapped the screens again and the borrowed D still works fine and mine won Dell Latitude no backlight even after screen replacement t work I didn t bother to test my screen in the borrowed D I can run an external CRT with mine and I can see the LCD display if I shine a light on it so I know the display is working and not cracked The laptop won t drive the CRT Dell Latitude no backlight even after screen replacement unless it thinks the lid is down so to use the keyboard I removed the sense magnet from the lid and taped it to the place where it would be with the lid closed I ve noticed in the past that this D often stayed fully on including the display it seemed when I closed the lid and walked away for hours Note When I tested the borrowed screen I had the sense magnet removed When the magnet is taped in place simulating lid down both the backlight and the display are off I can t see the display even when a light is shined on it but when the magnet is removed simulating lid up I get the display with no backlight It seems like the display knows whether the lid is up or down but the backlight seems to act like the lid is always down Is this possible What should I look for nbsp

A:Dell Latitude no backlight even after screen replacement

Did you replace the backlight inverter?
 

http://www.techspot.com/community/topics/dell-latitude-no-backlight-even-after-screen-replacement.198916/
Relevancy 20.64%

I built a gaming PC and it wont connect to the monitor. Also the keyboard and mouse won't turn on.
My graphics card is a NVIDIA Geforce GTX 700
 

A:Built own computer, but it wont connect to monitor

Could you please provide the specs for your build? Need to list the exact parts you used, including make and model. It makes things easier to help with diagnosing your issue or issues.
 

http://www.techspot.com/community/topics/built-own-computer-but-it-wont-connect-to-monitor.203102/
Relevancy 15.48%

when i start my computer, it goes to the gateway start page, and after a while (it's quite slow) it goes to the black page, and this is what it says:

Intel Boot Agent FE v4.1.10
Copyright (C) 1997-2003 Intel Corporation

Intel Boot AGent PXE Base Code (BA 1210BC-GW1)
Copyright (C) 1997-2003 Intel Corporation

PXE-E61 media test failure check cable
PXE-M0F exiting Intel Boot Agent

Reboot and select proper boot device or insert boot media
in selected boot device.

it just stays on that screen until i do a CTRL ALT DEL, then it goes back to the Gareway screen and after about 30 seconds finally boots up and i get the Windows XP start up page, and it opens up my desktop and i can continue .

Can anyone tell me why this started happening and how to correct it?
 

A:Computer start up is bringing up boot agent message

How old is the computer, or the hard drive. It appears you have a failed or failing hard drive.
 

http://www.techspot.com/community/topics/computer-start-up-is-bringing-up-boot-agent-message.150663/
Relevancy 53.32%

Earlier I was surfing when the monitor went black & the laptop shut down. Simple as that/ I booted it up & no problems till a few minutes ago it happened again. Both times I had two tabs open. I'm going to save what needed in case I do a factory restore.` Vista Home Premium
 

A:Black screen twice on my Vista

Overheating..? Download Speedfan and tell us temps.
 

http://www.techspot.com/community/topics/black-screen-twice-on-my-vista.202144/
Relevancy 21.93%

So I just finished a new build and am having a strange issue with my monitor and am at a loss The monitor will randomly just go black power stays on pc is still running fine its done it mid game as well as just sitting idle I have disabled sleep modes The new build is a a k and a asus a x - plus mobo radeon r gamer series ram MHz WD black gig hd raidmax watt PSU Now if I hook monitor up to my old video card radeon hd I have no out goes Monitor black of ideas issues but when I plug it into the motherboards VGA I have problems Now here is whats giving me problems I have hooked my wifes monitor into my new computer her monitor works fine with the onboard vga and my monitor works fine on her pc Also if I plug my tv into onboard hdmi I have no issues I would test dvi but I don t have a converter I do have updated bios and drivers and am running windows Things I have tried so far reinstalled windows and all drivers swapped monitors tried separate gpu adjusted refresh rate tried hdmi my tv instead of monitor instead of vga so far the only issue I can come up with Monitor goes black out of ideas is maybe my monitor is just not compatible for some reason Monitor and a AOC swl btw which from what ive managed to find about it there shouldn Monitor goes black out of ideas t be any compatability issues nbsp

A:Monitor goes black out of ideas

Did you ever figure this issue out? I'm having the exact same symptoms with my beautiful Dell 27" LED screen, but unfortunately, I'm starting to believe it's the monitor, which is just over the one year warranty. The sad part is, I was having this problem for over six months now, and had switched to the VGA cable to avoid the issue when it first started happening, but finally tried to troubleshoot it now, and I'm discovering that it may be a hardware issue and if I would have done something when it started, it was still under warranty.

Anyway, the only thing I haven't ruled out yet is the DVI cable, as that is still a possibility, however it seems unlikely that a DVI cable would go bad by itself after a few months of use. And looking at the cable, I see no signs of damage or broken/bent pins.
 

http://www.techspot.com/community/topics/monitor-goes-black-out-of-ideas.202016/
Relevancy 20.64%

My laptop does not identify my home wifi... while my phone, Ipad and work laptop all identify and connect. it identifies very rarely and this started about a few weeks ago..

this same laptop identifies other wifis but not my home WIFI... even while I am next to it.. it connects very easily when I connect a ethernet cable...

what could be wrong.. please help

Shantanu
 

A:Why wont my laptop connect to my WIFI

Specs on your laptop would be a big help.
Other than that, is there a switch you need to turn/switch on?
How old is this laptop?
Give more info so we don't have to play 20 questions.
 

http://www.techspot.com/community/topics/why-wont-my-laptop-connect-to-my-wifi.202025/
Relevancy 15.91%

Hi everyone, I have a problem.
I pinmodded an LGA771 Xeon to work with my LGA775 motherboard. I decided to do it the hard way and use aluminum foil and tape to pin mod it. I think it worked out fine but anyway, on to the problem.

When I cut off the LGA775 alignment pieces, I accidentally bent 2 pins out of shape a little. Initially, I didn't notice, so I put in the Xeon to try it out, didn't work.
Then I tried my old processor, also didn't work (worked fine previously).

So then I noticed the pins and bent them back into shape, AFAIK it is perfect and you can't even tell that anything happened.
Tried both CPUs, nothing, no beeps, no signal to the monitor.

Is it possible to damage my motherboard if I didn't do the pinmod correctly?
Is it possible that I damaged my processor or motherboard by trying to run it with those 2 pins out of place?

Help please
 

A:Bent motherboard pins, fixed but now will not boot

I am not really sure, but my guess is you did not do the pinmod correctly since both CPUs do not work. I hope someone else can provide some insight on this issue. Good luck!
 

http://www.techspot.com/community/topics/bent-motherboard-pins-fixed-but-now-will-not-boot.198999/
Relevancy 27.09%

My dell 1905fp finally crashed after a lot of years. I'm not a gamer, but I was very happy with that monitor.

Of course they no longer make it, and I understand refurbished monitors of this type are not necessarily a good option.

I can't seem to find reviews or comparisons which point the way to other similar monitors. I'm retired and just can't afford the $600 and way up price of what I've seen so far.

I just need a basic monitor with VGA and DVI, but would like the screen performance to be decent, incl for watching movies etc.

Any recommendations, and where to get a reasonable price? Again, don't want a wide screen.

Thanks much!
 

A:Reasonably priced 19" or 20" monitor, not wide-screen?

Nothing wrong with buying refurbs. They may have a few blemishes in the frame but nothing serious to keep them from functioning. I've bought a few myself and have had no issues with them. Although the monitors I bought were 20" widescreens that averaged $120 or less. For what you need/want, I wouldn't spend more than $150.

I know you said no widescreen, but movies do view better on widescreen.

http://www.amazon.com/Dell-UltraSharp-1905FP-Rotating-Landscape/dp/B00091R6KC - less than $100
 

http://www.techspot.com/community/topics/reasonably-priced-19-or-20-monitor-not-wide-screen.201641/
Relevancy 21.5%

Guys plz help me..ma dad wont let me game..so I cnt upgrade ma pc..I myself cn afford a pci vga..cn it run latest games?
 

A:Can I play Black Ops 2 on a PCI card like Nvidia 6200?

If that's your graphics card, then the rest of the system must be ancient. I'm gonna go with 'NO'.

To test: download Steam and Team Fortress 2. Turn resolution and all settings to minimum. Does the game run acceptably?
 

http://www.techspot.com/community/topics/can-i-play-black-ops-2-on-a-pci-card-like-nvidia-6200.201428/
Relevancy 15.48%

My partner's laptop HP 0700 Notebook will not boot up and just comes up with the above message. We found an HP troubleshooting site which said to reset the BIOS default settings by pressing the Escp key, F10 followed by F9 to reset. Then it said to press the F2 System Diagnostics keys which tested the hard disk and all the tests came out OK. When we tried to restart it, it came up with the same message and we have noticed that before it comes up with this message it says in the bottom left-hand corner "Prepare boot to OS" and then comes up with the message in the heading. We have not bootable disk as the laptop already had everything installed.

Coupled with this my partner's virus protection is coming up with "Threat detected" every minute on practically every site my partner visits on the Internet. You will appreciate that we cannot run any virus checks as we cannot get into the computer.

Any suggestions would be very much appreciated.

Compused
 

A:No bootable device - insert boot disk and press any key

Any luck with this?
 

http://www.techspot.com/community/topics/no-bootable-device-insert-boot-disk-and-press-any-key.201065/
Relevancy 16.34%

Model dx -ub gtx ti evga win Today my brother was granted a hand-me-down gpu from a good friend of mine and after attempting everything I know installing the card computer visuals boot on No nothing seems to work I get no visuals boot The card seems to power up the heatsink at least but the card still gives no visuals Installing the card was goofy as all hell For some reason when apparently fully seated the end of the card where the ports are refuse to line up properly There is about maybe a quarter of a No visuals on computer boot inch gap Seeing this makes me assume it is definitely not No visuals on computer boot seated correctly I re-seated about plus times it does not want to go in correctly or so it seems I am starting to think the gpu is far to big for this moba or the case is just poorly made On top of everything the computer does not detect the gpu in any form on device manager or any other program Installing the drivers won t work because it doesn t detect the gpu as well Could it be a faulty psu - idk Maybe the gpu just went because it was nold - idk All I know is this is a friggin pain maybe someone could help me out The gtx ti was working on the current day when it was in my friends computer And yes I have plenty of power wats it was the same power supply from said friend s computer nbsp

http://www.techspot.com/community/topics/no-visuals-on-computer-boot.200851/
Relevancy 49.45%

Laptop Model Acer Aspire G Graphic Card Model ATI Mobility Radeon HD MB 512MB) screen 5470 with problem Black ATI (Acer Aspire Radeon 4745G HD Mobility OS Windows bits Problem Laptop starting to turn to blackscreen constantly since last week At the Black screen problem (Acer Aspire 4745G with ATI Mobility Radeon HD 5470 512MB) beginning it still manage to back to normal after restart But then after few days it turn to black screen during every startup whenever it progress until window start-up animation I can even still hear the welcome sound although the screen is black I can still using the laptop through safe mode After that I google for some related solution and found that it s probably the graphic card display adapter problem So I disable the graphic card Radeon HD Black screen problem (Acer Aspire 4745G with ATI Mobility Radeon HD 5470 512MB) option under display adapter and it goes Black screen problem (Acer Aspire 4745G with ATI Mobility Radeon HD 5470 512MB) perfectly well But when I enable the graphic card option under display adapter in normal mode my laptop screen will turns black again back to previous problem I tried to uninstall the graphic card under display adapter and reinstall the graphic card driver download from Acer Support but the problem still appears The graphic card driver after reinstall is appears to be ATI Mobility Radeon HD series instead of previously ATI Mobility Radeon HD Is it normal or I download the wrong driver although it s from Acer Support What should I do to solve this blackscreen problem nbsp

A:Black screen problem (Acer Aspire 4745G with ATI Mobility Radeon HD 5470 512MB)

Try this:
1) Uninstall the all AMD software with this AMD Uninstall tool.
2) Restart your PC.
3) Download and install the latest stable driver (13.4) from here: http://sites.amd.com/us/game/downloads/Pages/radeon_win7-64.aspx
 

http://www.techspot.com/community/topics/black-screen-problem-acer-aspire-4745g-with-ati-mobility-radeon-hd-5470-512mb.193825/
Relevancy 31.82%

Hello everyone,

I am not very tech savvy, so I apologise in advance for my uselessness..

I'm having serious issues with my Dell, every now and then the screen will fragment violently, sometimes just part of the screen, sometimes all of it, I can move the cursor and click and open things, if I can see the screen, which is not always possible..

I believe it may be a problem with my graphics card, my Dell does not have a tower, it is the monitor and tower in one device.

It's getting to the point where I cannot submit schools tasks on time because of my system, and I am just in need of serious assistance..

Thank you.
 

A:Screen scrambling

It more or less is the graphics chip. If this is the case you may need to take it to a local computer repair shop.
 

http://www.techspot.com/community/topics/screen-scrambling.200457/
Relevancy 20.64%

I have a Xerox Phaser 3117 Laser Black and White Printer. When print, half of the paper come out to the out-put tray. Other half still in the fuser unit. Stop printing and red light indicate. When I check the print out, all details have printed. But, first row of my details have moved very top of my A4 paper.( Whole document moved 2-3 inches above[to the top of the paper]. What is this and how to resolve this problems( Paper Jam and document move to top of the sheet)????
 

A:Xerox Phaser 3117 laser black and white printer problem

chathura said:





I have a Xerox Phaser 3117 Laser Black and White Printer. When print, half of the paper come out to the out-put tray. Other half still in the fuser unit. Stop printing and red light indicate. When I check the print out, all details have printed. But, first row of my details have moved very top of my A4 paper.( Whole document moved 2-3 inches above[to the top of the paper]. What is this and how to resolve this problems( Paper Jam and document move to top of the sheet)????Click to expand...

what can I do
 

http://www.techspot.com/community/topics/xerox-phaser-3117-laser-black-and-white-printer-problem.196151/
Relevancy 27.95%

Hi I've recently built my pc with a lot of help from a friend but I've run into a problem my CPU is:

http://www.ebuyer.com/538278-fx-9590-4-7ghz-16mb-220w-wof-skt-am3-l2-l3-16mb-220w-fd9590fhhkwof

and my motherboard is

http://www.ebuyer.com/269072-asus-m...annel-hd-audio-matx-motherboard-m5a78l-m-usb3

I'm a novice PC builder so I let my friend choose the parts and he assured me the parts were all compatible but this error says otherwise.

I've updated the bios to the latest but I'm not sure my cpu was even on the list of supported cpus...Can anyone please offer me advice?

Oh and I have to keep resetting my cmos whenever I turn on m pc or the monitors just go to sleep.
 

A:CPU meant to be 4.7 but shows 4.0

FX 9590 is a high Watt CPU and was only supported on a few of the very high end motherboards. That board is not one of the supported boards and in actuality is not designed for that class of overclocking and power.

The only boards with guaranteed FX 9370 & 9590 support are a few of the 990FX boards: The Asus Crosshair V-Z, The ASrock Extreme9, Asus Sabertooth, and the 2 Gigabyte 990FX Extreme boards.

I would return that motherboard and pick up one of those boards to replace the one you have otherwise you will probably run into issues. This particular Motherboard you bought only support up to 140Watt CPU's where as the 9590 is a 220Watt CPU.
 

http://www.techspot.com/community/topics/cpu-meant-to-be-4-7-but-shows-4-0.200342/
Relevancy 14.19%

I just got new SSD - Transcend 128GB. Installed Windows. When I cold boot my PC -- from a shut off state -- I get this message before Windows loads: "Reboot and select proper boot device or insert boot media in selected boot device and press a key."

However, if I press Ctrl+Alt+Delete and reboot I come into Windows.

If I enter BIOS from cold boot, it does not detect my SSD. After rebooting it detects my SSD. Seems like the SSD is slow at firing up?

I have run chkdsk and memory test without any errors.

My motherboard is the MSI Z87-G55.
 

A:"Reboot and select proper boot device"

Just installed newest BIOS, it didn't help.

When I go into Board Explorer in BIOS it says SATA port 1 is empty. After reboot it says the same port is occupied by my SSD.

Update: Plugged in another hard drive (non-SSD). Same rules apply to it. On cold boot, none of the drives are detected. After reboot, both drives are detected. I used a non-SSD as system drive before this, worked perfectly.
 

http://www.techspot.com/community/topics/reboot-and-select-proper-boot-device.200351/
Relevancy 16.34%

So I installed a second Hard drive this weekend. And I want to create a new partition on the new hard drive, which will hold my boot files. So I want a partition of my second hard drive to be my main boot device. (Like 20gb)

Then I?m going to combine my first hard drive, and the remaining space left into 1 partition.

My Local disk has my Boot, Page file, and Crash dump. I want to move this to my new partition. (Second HD)

I tried moving the entire windows file in my local disk to the second hard drive, half way through it wouldn?t allow me to move all of the files.

How do I do this without re-installing windows?
 

http://www.techspot.com/community/topics/changing-boot-drives.200248/
Relevancy 31.82%

cursor goes off screen to the right and bottoom i tried the video settings with the duel monitor setting and its not that nor is it my monitor itself it happened while i was messing around with toolbars and taskbars but i tried everything and nothing helps evem n system restore dont work or adjusting my video card which is a nvida 8400 gs on my win xp sp3 dell dimension 2350, i already had my integrated video card disabled so im stumped if someone can help plz do so thanx in advanced
 

A:Cursor goes off screen

Most problems like this are down to having the wrong Graphic card drivers installed.
If you go to the Nvidia site, select your card from the drop down boxes.

http://www.nvidia.com/Download/index.aspx?lang=en-us

Save the driver somewhere easy to find on your pc, (desktop)

To uninstall the current drivers, go to Control panel, system, device manager.
Click on Display adapters, right-click and choose uninstall driver.
Go back to the Desktop and run the new driver installer.
Set up the display as you want in Control panel, display.

*While you are in 'Device manager', do you have a yellow warning sign next to the 'mouse and pointing devices'?
If yes, you can right click on it and choose 'Update driver'
 

http://www.techspot.com/community/topics/cursor-goes-off-screen.160081/
Relevancy 52.46%

I have a prob,whit a geforce 8800 gts 512mb.

I got it from a secondhand site and all was alright till I started to overclock

Nothing big,oc at 16% and the temp was 60*C wich aint so high.But when I started the pc next day,I got only black screen,no bios no safe mod no nothing.

I have a
pentium D 805 2.66
gigabyte ga-8i945pl-g as mobo
500 mb ram drr II/ 4 slotsX 500=2gb
acopia dual fan it-25f2 -psu

I know the mobo aint dead cuz I tested with my other gpu,and it worked
Did a bios reset-still black screen
changed the ram position
tried with other monitor
dvi-vga adapter works(I tested on the other gpu)
Nothing worked

I noticed that now when I start the pc,the gpu fan speed doesn't change I mean its at 100% but when I had a image on the screen at the start up,the fan speed was at 100% only for 3 sec,then it changed lets say at 50% after those 3 sec.

should I try the bake fix or its a certain dead card?

Sry for my spelling mistakes hope u can give me an answer cheers.
 

http://www.techspot.com/community/topics/black-screen-startup-8800-gts.199989/
Relevancy 27.09%

My Hp pavilliin g7 series laptop running windows 7 home starts up with white screen and no beeps or sounds . Started freezing on Hp logo screen last week only sometimes. Id turn off and it would work on second try. About a year and a half ago I used laptop to preview windows 8. And after I reinstalled windows 7 it has been acting funny. Ie freezing and louder fan noise. I did recently update the bios and a pci device driver that never installed. But now it has white screen this morning. I shut off and powered up and still white.
I took off battery and pressed power for 10 sec plugged back in and still white. Still no noise.
Any ideas?
 

A:HP G7 17" screen starts up white and stays white

Try attaching an external monitor and notice what it displays...
 

http://www.techspot.com/community/topics/hp-g7-17-screen-starts-up-white-and-stays-white.199331/
Relevancy 27.52%

Hi !
I have HP Pavilion w1164d Desktop PC , I formatted my system and now whenever I insert my dvd or any cd it shows blank dvd/cd. I tried a video cd it shows the icons but when I play it it does'nt pay and shows some error.

Conclusion - After formatting my system , my Cd/Dvd reader cum writer is showing the Cd blank, I have tried many dvd's but it shows that my DVD is blank
System info -
HP Pavilion w1164d Desktop PC
Ram is upgraded to 1 GB
CD /DVD reader/writer is from LG (company)
Please click and check the system information -
http://h10025.www1.hp.com/ewfrf/wc/...s&dlc=en&lc=en&os=228&product=441189&sw_lang=
Kind Regards
 

http://www.techspot.com/community/topics/dvd-reader-writer-shows-blank-dvd-cd.199844/
Relevancy 27.09%

I have the same problem When turning on the laptop screen goes to white I can hear windows starting but cannot see anything I Laptop white starts and white stays screen up connected it to an external monitor which will only display once windows has loaded I then took the whole laptop apart and discovered the LCD cable was frayed due to a faulty laptop hinge I replaced the cable and it was the same just white The problem I think is with the motherboard Laptop screen starts up white and stays white and the intergrated video card Upon taking the whole thing apart I noticed that where the video card plugs in is right where the heat sink is and the cooling fan which gets exceptional hot I figure it has fried the board to the extend the monitor will not work where it is plugged in but the external monitor will work but only when windows boots So sad to say because of the the heat this laptop puts off and if you have it sitting on your lap or bed or anywhere else that it cannot cool properly it has over heated and you will have to get a new motherboard Moderator note Moved from this thread - http www techspot com community t up-white-and-stays-white post- nbsp

A:Laptop screen starts up white and stays white

"I connected it to an external monitor, which will only display once windows has loaded"... This is normal behavior because the video signal to the external monitor is not sent until Windows loads. If you can see normal video, the motherboard video chip is good
 

http://www.techspot.com/community/topics/laptop-screen-starts-up-white-and-stays-white.199498/
Relevancy 30.96%

Hi, I'm new to this site, as to any forums in general, but I was wondering if someone would help me identify what's wrong with my laptop.
It's been used for at least two good years and 've been working better or worse, I'm currently running W8, I've cleaned it many times and it isn't overheating (as far as I can tell by checking the fan.
The problem is that after an hour or so of use, it just goes to the Shutting down... screen. Sometimes it shuts down during a game, sometimes during a video or if I wait long enough it'll shut down on the desktop without any apps running.
It's really frustrating and weird, there are no errors or any indications as to why it shuts down. Happened about 20 times for the past few days. Ideas?
 

A:Laptop goes to shutdown screen abruptly

The laptops thermal compound has probably gone bad and hardened... This causes the motherboard to trigger its "overheating" circuit, even though it doesn't seem that hot
 

http://www.techspot.com/community/topics/laptop-goes-to-shutdown-screen-abruptly.199673/
Relevancy 31.39%

Acer Aspire 2000 (Cl32) runs WinXP/Pro/Sp3 and can be set to display in its native resolution of 1280 x 800 from its ATI Mobility Radeon 9200 video card. However, when it reboots, it reverts to 640 x 480, and often blames an absent or corrupt video driver. My remedy is to UNinstall the video driver from Device Manager and reboot, but I'd like to have native resolution without going through this 'readjustment' at every reboot. On the rare occasions that I can access the ATI Control Panel, Schemes in the Display tab, is empty. If I select 'Default Single Display' from the offered options, the SAVE button is greyed out. Any suggestions as to how I can get the native resolution to 'stick' ?
 

A:Impermanent Screen Resolution

Uninstall driver via the 'Add/Remove Programs'. Run Ccleaner and clean the temp files plus registry. Download a fresh copy of the latest drivers, install.
 

http://www.techspot.com/community/topics/impermanent-screen-resolution.199565/
Relevancy 51.17%

Dell Studio i nd Gen GB Gb Gb Graphic My laptop screen suddenly shows some small color boxes and goes black but laptop still on when I restart screen shows nothing but Hard disk CPU fan are running normally than I tried this Power off the computer Press and hold the quot Screen on laptop turn wont My dell D quot key on the keyboard and then My dell laptop Screen wont turn on press the power button and My dell laptop Screen wont turn on wait for the computer to start I just heard only loud beep sound continuously but screen remain black than I tried this Unplug the power cord -- gt Remove the battery -- gt Hold the power button for seconds -- gt Connect the power supply then try to switch ON the laptop and It Worked and laptop start normally but after - minutes it happen again screen gone black it shows small color boxes and go black than I tried above method once again but this time It s not working Than I connect the laptop to the external monitor and start It shows nothing on it First sec monitor run like working mode green light then it goes to offline mode orange light It s like something is resist in laptop to startup I don t know what s happening Please help Mod note Please do not spam the boards with posts of the same problem One time in the appropriate forum is sufficient Thanks nbsp

A:My dell laptop Screen wont turn on

Sounds like the graphics processor on your laptop is on the way out, if even an external monitor didn't work.

Does BIOS work? F12/DELETE when booting up to get in.
 

http://www.techspot.com/community/topics/my-dell-laptop-screen-wont-turn-on.199389/
Relevancy 20.64%

Hello, I am using windows 7 and have an ASUS DRW-24B1ST c ATA driver. It shows up as so in the device manager but for some reason won't show up in my computer and the autoplay feature wont work because when I put a cd into the darn thing nothing happens.

I did a google search and found this http://support.microsoft.com/kb/314060 but it failed to fix the problem.

Not quite sure what to do now...any help would be greatly appreciated.
 

A:CD/DVD ROM drive wont show up in 'My Computer'

Download and run Filter Driver Load Order. Select your CD/DVD device, click Clipboard button then paste the result into your next post
 

http://www.techspot.com/community/topics/cd-dvd-rom-drive-wont-show-up-in-my-computer.198890/
Relevancy 30.96%

So this is an interesting one...
There is a yellow streak on the right hand side of my screen. It has no discernible shape, and to be honest it looks like a coffee stain. However, it is defitely internal, since I have noticed that I cannot get it out, and it is...growing. It is just a light tint, with part of it being more intense than others. And here is another catch: when the resolution changes, or the screen refreshes, or when it is booting up (basically when there is a black screen) it sometimes switches to a bluish color. This is very odd. The only solution I can think of is opening it up and making sure wires are secure (note this is a laptop).

PS: I am pretty experienced in computers, first time seeing something like this.
 

A:Yellow Streaks in computer screen

It may be a damaged LCD screen...
 

http://www.techspot.com/community/topics/yellow-streaks-in-computer-screen.198100/
Relevancy 30.96%

Just over the weekend I got rid of my extra PS I had laying around and got a HP DV - US Laptop The guy I had got it from had Windows Ultimate on it which I was okay with But it was -bit not -bit The laptop has a dual core i M processsor clocked at ghz with gb ddr ram installed so it s perfectly capable of running bit windows So I got an installation of Ubuntu bit to put on the computer as a fail-safe incase something went wrong with the installion of bit windows Well heres the thing I installed Ubuntu but it had said a file was corrupt so I had to stop it and start over again so I went ahead and formatted the Formatted Offset Is Now DV4-2164US, HP Screen whole harddrive for two reasons the install messed up and the guy had the harddrive have sections partitions on it and I didnt want that After I tried to install it went perfectly and installed but then as it rebooted some problems occured - when it booted up the screen was black but when I changed the brightness with the keys the screen showed but it was strethed past the screen about - inches to the right It was on the left edge perfectly but went past the right edges Also at the bottom it stretches anything down some and shows whats at the very top of the screen again at the bottom - when updates installed the screen was normal again so I tried to install Windows alongside Linux but it simply wouldn t so I had to Formatted HP DV4-2164US, Now Screen Is Offset format again giving me the same offset problems as the first time I ve heard people say its a screen cord problem and that its the screen itself But iif thats true then why after updates on Linux it was fixed the first time If needed I can upload pics of the screen display I would like to have anyone help that can with this problem Thanks nbsp

http://www.techspot.com/community/topics/formatted-hp-dv4-2164us-now-screen-is-offset.198479/
Relevancy 31.39%

What cause the screen resolution to be distorted?

It is not the monitor. When the monitor is connected to another system it is displaying perfectly.
 

A:Screen Resolution Distorted

Adjust your screen resolution.
 

http://www.techspot.com/community/topics/screen-resolution-distorted.198374/
Relevancy 52.46%

I bought a Sapphire HD graphics card card screen Black new with (almost) graphics about months ago Everything worked fine until one day ago when I booted up my computer everything booted up Black screen with (almost) new graphics card Fans Lights amp No system beeping But I was only getting a black screen with occasional small white flashes I tried booting with multiple displays and multiple ports nothing worked I also tried changing my bios settings also with no luck the on-board graphics work fine when the graphics card is removed from the PC My power supply is a W which is more than enough Again Everything worked fine until that day I doubt anything is damaged I handle everything in my PC with extreme care And yes all of the AMD drivers are installed I will try to reply to any questions asap I m sorry if I don t reply quickly I have a very busy schedule Any help on this issue would be VERY much appreciated Some PC Specs listed Black screen with (almost) new graphics card below Lenovo idea centre K Watt new power supply Intel th Generation Core i gb system RAM Not shure about the motherboard type nbsp Black screen with (almost) new graphics card

http://www.techspot.com/community/topics/black-screen-with-almost-new-graphics-card.198269/
Relevancy 29.67%

Hey,,how are the things,,I have a problem,my dvdrom doesn't read any empty disks.I tried some disks that has things on it..all of them worked.only the empty disk doesn't work.I bought another disk and it still not read,,what to do ? :/
 

A:DVD-Rom Doesn't Read Empty Disks

Question: Do you have a DVD Rom or a DVD burner? If you have a DVD burner then it should be able to read the blank disks so that you can add files to it. But if you insert a blank disk into a DVD Rom drive (that does not have burning capabilities) then it might not read the disk because it contains no information to read.
 

http://www.techspot.com/community/topics/dvd-rom-doesnt-read-empty-disks.198089/
Relevancy 15.91%

Hey guys I ve recently installed a new hard drive on my desktop PC It s a GB quot drive that I removed off of a new laptop I got The drive works great BUT ever since I installed it I get a really annoying drive, hard boot new get message Installed on message every time I boot my machine It s some sort of copyright disclaimer It says the brand of the HDD Hitachi and lists the copyright of the disk management system or something like that It says copyright jmicron com and then quot Hit enter to continue quot The message is displayed maybe for seconds and it disappears on its own so no need to press enter Pressing enter will get rid of it faster So yes Installed new hard drive, get message on boot it s not an error but it s annoying and it adds to Installed new hard drive, get message on boot my boot time I m assuming the exact brand and model of the HDD isn t relevant nor is it the message but if it is let me know and I ll post that information I m not near my PC at the moment Is there an option in the BIOS or msconfig I Installed new hard drive, get message on boot could change to get rid of this Intel Core i GHz GB DDR RAM Mhz GB Samsung SSD Main drive additional HDDs GB GB and GB ATI Radeon HD GB W Power Supply W nbsp

A:Installed new hard drive, get message on boot

A little help with this, please? I'm baffled, I'm no computer newbie and I've installed many-a hard drives before, but I had never gotten this message after installation. The exact model of the hard drive is:

Hitachi HTS547575A9E384

This is a picture of the message:
 

http://www.techspot.com/community/topics/installed-new-hard-drive-get-message-on-boot.197890/
Relevancy 31.39%

Laptop, Tosh R945,Win 7 Home Premium

The computer changes the "on battery" brightness to full periodically. I cannot figure out the common theme to this....

I set it to 70% to save battery

sometime later it is 100% again

nobody uses the computer except me
I am not changing it
 

http://www.techspot.com/community/topics/windows-7-screen-brightness.197917/