Windows Support Forum

Excite.com Stock Tracker missing?

Q: Excite.com Stock Tracker missing?

I've used Excite.com for years but with in the last few days I have noticed that a feature of theirs Stock Tracked is missing! Anyone happen to know if this is permanent?

http://www.techspot.com/community/topics/excite-com-stock-tracker-missing.147085/
Relevancy 100%
Preferred Solution: Excite.com Stock Tracker missing?

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Relevancy 19.78%

Hi All,
This is my first post here
So the issue I am facing is that I have a Dell Laptop with dual graphics card (Intel(R) 4400 integrated and AMD Radeon 8850m dedicated). The System would not detect any AMD driver installed on it. The device manager was showing only the Intel Graphics Card being installed .
Then I went on to uninstall the Catalyst Command Center from Control Panel, wherein I completely uninstalled the AMD Graphics driver and everything related to it.
Now, AMD is not at all being recognized by my system. Device manager doesnt show it even in hidden devices, DriverEasy scan doesnt read it, Even Dell System detect is failing to detect the AMD graphics Card.

How do I proceed ahead with this issue.

Have I somehow unmounted the hardware internally?
Is there anyway besides a factory reset to get this working again ( I have concerns with a factory reset also not helping me )
What system scan tools can I use to get my laptop to recognize the Device again?
Please Help
Thanks In Advance
 

A:AMD Radeon 8850m device is missing

Have you tried going to Dell support site and down loading the orginal drivers and software for your graphics.
 

http://www.techspot.com/community/topics/amd-radeon-8850m-device-is-missing.215797/
Relevancy 37.41%

Hi, I just bought a GB Windforce 770 4GB. It has an asic quality of 83.5%. How far have you guys taken this card on the stock cooler?
 

A:How far have you OC'ed your Gigabyte 770 Windforce 4GB on stock cooler?

According to this write up, you wouldn't get much more out of the card. They mention the card is already clocked near its maximum.

Gigabyte GTX 770 4GB Windforce 3X Benchmark and Review - Page 5 of 18




With our favorite overclocking tool MSI Afterburner we couldn?t get any where when it comes to overclocking. However, with EVGA Precision we managed to slightly bump up the voltage which enabled us to reach a stable 1280 MHz for GPU and 7484 MHz for memory which, we must state again is a very nice overclocking endeavor, especially if you take into a count that we were dealing with a cards voltage that has been locked in the BIOS. Now since the card was already overclocked to its maximum we knew we won?t get much out of it. +50 MHz (1280 MHz w/boost in total) and +233 MHz for memory making it 7484 MHz respectively is probably the maximum you can get from any GTX 770 unless your really really lucky.Click to expand...


 

http://www.techspot.com/community/topics/how-far-have-you-oced-your-gigabyte-770-windforce-4gb-on-stock-cooler.198987/
Relevancy 19.78%

I've got my build together to use a Socket 1150. I have read that one of these CPU's does not have the full/latest instruction set vs. the others. Overclocking is not important to me but I will buy the "K" series if it has the fullest instruction set.

Can anyone enlighten me further on this?

Thanks.
 

A:I7-4770 vs. i7-4771 vs. i7-4770K - Which has missing instruction set vs. the other 2?

4770k
http://ark.intel.com/products/75123

4771
http://ark.intel.com/products/77656/

4770
http://ark.intel.com/products/75122/

They all have the same instruction sets according to the intel site, unless im missing something, which one are you reffering to.

Those are essentially the same chip, just different clock speeds and 1 is unlocked.
 

http://www.techspot.com/community/topics/i7-4770-vs-i7-4771-vs-i7-4770k-which-has-missing-instruction-set-vs-the-other-2.197871/
Relevancy 37.41%

So I ve been monitoring my computer s temperatures and I must admit I m not happy with what I ve seen After gaming my FX- has been reaching temperatures above the C max recommendation temperatures FX-8320 high Stock with that AMD has in place The highest I ve seen so far Stock FX-8320 with high temperatures is C which is just outrageously high I m running my FX- at completely stock speeds with the stock fan on a Gigabyte FXA-UD rev motherboard Now as of writing this thread I Stock FX-8320 with high temperatures have already ordered a Cooler Master Hyper EVO as my research suggest that this is a very capable fan for an FX- xxx series processor at stock speeds and maybe even a modest overclock as well I actually intended to get this cooler earlier in my system s life but I ve been lazy and frugal and figured that the stock fan would be fine for stock speeds I also figured my spacious Antec case with a ton of fans at max speed would ve been enough Anyway what shocked me is that when I built this system I kept a very close eye on temperatures during gaming and I never would exceed C under load and idled around C Now quite a while down the line the same cooler can hardly keep the processor below C under load but when the machine is idle I get really low temperatures so low it s at C at some points I ve included a screenshot of both these situations So frankly put what the hell is going on here My idle temperatures are better than ever but my load temperatures are worse than ever Could I have an inaccurate sensor on my processor As precautionary measure I already cleaned out all of the dust filters in my Antec quot Illusion quot case photo also included I also opened that puppy up and blew as much dust out as I could off of the components so it s not real dusty in there anymore The heatsink fan combo was properly secured so it doesn t seem to have become improperly seated over this time Despite this I haven t seen an improvement in temperatures Any assistance in figuring out what the deal is here would be greatly appreciated My specs are as follows AMD FX- GHz Vishera Gigabyte GA- FXA-UD rev G Skill Sniper GB DDR - RAM Gigabyte GeForce GTX GB WindForce Western Digital Black TB SATA-III HDD Antec Illusion case Antec HCG W PSU Windows Ultimate SP x x mm Antec fans mm Antec fan nbsp

A:Stock FX-8320 with high temperatures

Have you cleaned the actual cpu cooler? If it has as much dust as your filter does, that could really affect the efficiency of the cooler. I have both a 8320 in a build and a 8350 and I use AIO water coolers such as Corsair H80 or H100.
The CoolerMaster Hyper 212 EVO is a very good air cooler. Take your time mounting it and be sure to use quality thermal paste.
 

http://www.techspot.com/community/topics/stock-fx-8320-with-high-temperatures.202655/
Relevancy 37.41%

So I recently started to overclock to boost performance out of my old cpu,core i3-530..I could manage 3.6 ghz at stock volt..with more volts, I have clocked till 4.07 ghz..I don't see any point crossing that barrier.Here's my concern..Is it safe to overclocked(say 3.6ghz) and then reset it back to default/stock frequently or rather set to a certain speed and keep it as it is..I am concern with longevity of processor and power consumption since I couldn't set the bios to increase or decrease the clock hertz as windows does at its default..
 

A:Overclocking and resetting to stock frequently

What voltage did you use to get to 4ghz? If we know that we can kinda say if its a safe day to day OC voltage. If your planning on running your system Overclocked all the time I have always kept speedstep/cool and quiet enabled to allow the cpu to down clock when idle to save on power and I have gotten 3+ years out of every chip I have overclocked while doing that.
 

http://www.techspot.com/community/topics/overclocking-and-resetting-to-stock-frequently.208746/
Relevancy 36.55%

Hi, I have an amd fx 8320 with an r9 280 with the stock cooler, it's at 3.5 ghz, no overclocking, and I was playing some Saints Row 4, I left HWMonitor on and when I came off (20 mins later or so), it said max temp 79?!?!?! During gameplay the fans are louder than a chainsaw... I was looking at getting some decent thermal paste and a 212 evo, but I dont know if that will help. The airflow in thecase is quite poor, but im going to try and work on it.. also, it went over 70 max temp when I was just playing football manager 2014 last night...
 

A:AMD FX-8320 stock cooler/heatsink - crazy rpm/temps

79 on what? CPU or GPU?
 

http://www.techspot.com/community/topics/amd-fx-8320-stock-cooler-heatsink-crazy-rpm-temps.205058/
Relevancy 19.78%

Hi,

I have recently built a desktop computer, that had minor issues that I had eventually worked around or found a solution to. This issue is an exception. When I first used my computer, everything was fine with sound, until I found that my graphics card was not inserted correctly, and I was running with terrible resolution. After fixing this issue, I had no sound. This was about 10 months ago. On and off throughout this period I began to try and fix this issue, by disconnected and uninstalling my GPU. I launched skype and trying calling someone, but it alerted me that my sound card was missing. I know this is not true, so I have 3 main theories: 1. The sound card was fried (not likely). 2. My graphics card audio overrode the onboard audio, 3. The two (GPU and sound card) were operating on the same frequency. As I have said before, I had sound before I re-installed my graphics card, so I would either appreciate a solution to switch back to onboard audio, or a way to use both somehow.
Specs: Motherboard: ASUS P8z77
Graphics Card: Nvida Ge Force 670
Processor: Intel i7 core.
 

A:Cannot use speakers/headphones: Sound card is missing?

Please respond, this issue has been pressing me for almost a year, and I would really like it to be resolved.
 

http://www.techspot.com/community/topics/cannot-use-speakers-headphones-sound-card-is-missing.203668/
Relevancy 19.78%

Hello,

Old Dell computer running Windows XP that was never backed up and I am trying to recover files and photos. I get NTLDR is missing when I boot. I've used Testdisk/Photorec to try to recover my data but when going through the recovered data it seems to be all system files that I know nothing about. I used Ubuntu on the Dell to run Testdisk. I also hooked up the hard disk to my laptop with a hard disk adapter and got the same results.I also ran a NTLDR boot disk but ended up with the same NTLDR is missing message. I dont have a XP recovery disk. Anybody that has had this issue please help!
 

A:NTLDR is missing. Hard Drive Failure.

Trobles86 said:





I also hooked up the hard disk to my laptop with a hard disk adapter and got the same results.Click to expand...

If you have access to another PC or laptop then you can connect the hard drive in to that machine and get the files you wanted to recover from your hard drive in there.
 

http://www.techspot.com/community/topics/ntldr-is-missing-hard-drive-failure.203104/
Relevancy 37.84%

I have a question guys, is the reference model of the GTX 780 Ti better than some custom models made by Sapphire, Palit, EVGA etc? Do they have any advantage oever them?
 

http://www.techspot.com/community/topics/nvidia-gtx-780-ti-is-the-stock-one-better-than-some-models.201259/
Relevancy 20.21%

I burned 1 GB of info in a DVD-R disc. Computer could read it perfectly and said 1 GB was recorded and 3 GB still free available for more data.
Next day I tried to add more data, 0.5 GB in a folder. All was OK, I dragged folder to DVD and PC said it was doing the job, after 2 minutes said folder was ready to be burnt. But the previous folders did not appear. I quit burning and tried to check the information on DVD. right- clicked properties and PC says it has 1 GB of data burnt and 3 GB available. But if I try to read the information I had burnt before, nothing, no files or folders.
May I still recover the 1.0 GB recorded first day? HOw?
 

A:DVD-R with 1 GB info but data is missing

When burning multiple sessions to a DVD-R disk, if the sessions are not left open or closed improperly, then it can "lose" data or make the entire disk worthless. As for recovering data from a DVD-R or any optical disk, for all intents & purposes it's a lost cause, it's not impossible, but it would cost out the wazoo and the likelihood of recovery is slim.
As cheap as DVD-R disks are, don't burn multiple sessions, just burn once and be done with it.

Hope this helps, take care!
 

http://www.techspot.com/community/topics/dvd-r-with-1-gb-info-but-data-is-missing.198267/
Relevancy 37.41%

I accidentally bought a 4770K without a cooler :/

But I have an unused 3770 stock cooler somewhere, would it be OK to use that?

Thanks
 

A:Can the 3770 stock cooler be used on a 4770K?

I would say yes after reading the following. It seems the difference mentioned below is all in the backplate design. Since the stock cooler doesn't use a backplate, it is a non-issue.

Noctua Offers Free LGA 1150 Haswell Mounting Kit Upgrade for Older Heatsinks



Because the LGA 1150 socket keeps the same mounting hole spacing as the current LGA 1156 and LGA 1155 sockets, many newer Noctua cooler will not need the mounting kit upgrade, and can simply be installed into the Haswell machine as is. In other words, if the heatsink worked with your Lynnfield, Sandy Bridge, or Ivy Bridge-based system, it will work in a Haswell system as well.Click to expand...


 

http://www.techspot.com/community/topics/can-the-3770-stock-cooler-be-used-on-a-4770k.198945/
Relevancy 37.41%

Hi, I'm using an Akasa K32 cooler on my 3770 and my max temps seems to be 95 degrees so I'm wondering if I would get better cooling with the stock cooler.

My idle temps are 47 degrees.

Thanks
 

A:I7 3770 with stock cooler, what are your max temps?

You shouldnt go past 80C on a CPU, otherwise you are killing its lifespan. The Stock Cooler should be better for now. Get a Hyper 212 Evo for $35 if you want. It is very good.
 

http://www.techspot.com/community/topics/i7-3770-with-stock-cooler-what-are-your-max-temps.196123/
Relevancy 36.98%

I had a problem with my PC turning off which occurred in Ubuntu and Windows I turned to the bios hardware monitor and found that heat ineffective fan/cooler suddenly I2500 stock was building up to degrees and then turning off The case was full of fluff and dust which I cleared out The stock fan cooler was loaded with the I2500 stock fan/cooler suddenly ineffective stuff No wonder it was overheating Now I cleaned off the old thermal grease with isopropol alcohol qtips and a glasses cleaning cloth I reapply a small amount of thermal grease I had a lot of trouble with one push pin on the cooler but got that running Each time I fit the cooler fan I use I2500 stock fan/cooler suddenly ineffective fresh grease after cleaning off the old gunk I found that the grease seems to be about right as applying it in a small blob in the middle of the CPU I found it covered the whole area of the cooler when I later took off the cooler as cooling isn t working The grease isn t leaking outside of the area of the heatsink so I guess my loading isn t excessive The grease is Arctic silver It may be a couple of years old Is that the problem The temperature still climbs up to about before shutting off I turn it off early now once I see the cooling isn t working Taking the other side of the case off I can see that all four push pins are correctly seated on the motherboard I check the CPU fan and it is working OK The other case fans are working but even they being off couldn t account for overheating like this Any ideas nbsp

A:I2500 stock fan/cooler suddenly ineffective

What are you getting for a reading on "Vcore"?

If the CPU voltage is too high, that would explain the heat up.

That's all I got ATM.

Is this thing overclocked at all?
 

http://www.techspot.com/community/topics/i2500-stock-fan-cooler-suddenly-ineffective.194390/
Relevancy 20.21%

I have a USB drive on my WinXP that does not work. The error message that I get , when I plug a flash drive in, says that the driver for the USB drive has not been installed.

Now I have 6 USB's on the system. All of them work but this one.
Device Manager shows 5 "Standard OpenHCD USB Host Controller" entries. I assume these are for the 5 working USB drives(?) Am I missing one more USB entry for the 6th USB drive that does not work?

I need to install the missing driver for the 6th USB, but don't know how. I head that you could just uninstall all of the "Standard USB Host Controller" entries and have WinXP. re-install them after re-boot, but am not sure if this is correct.

Any help with installing the missing USB driver?

Thanks for your help

Scott
 

A:Missing USB driver in Win XP

Im not sure if that is true but u can try go to website like if ur computer is dell go to www.dell.com/support and follow to drivers then lookfor your make and model laptop look under xp and download usb drivers
 

http://www.techspot.com/community/topics/missing-usb-driver-in-win-xp.194210/
Relevancy 20.21%

Hello guys , I have a seagate external hard drive I dont know if its a TB or WD ? but it has a max capacity of 500gb. so here is the problem , the external drive shows that it occupies 295gb out of 500gb capacity but when I opened it , the files inside the drive does NOT shows up,I dont know if they are missing or something,and I dont know what is the real problem ..so ive tried to unhide it but nothing happened can you suggest some solutions to this problem ?, I really need the files inside the external drive , and I dont want to format it . thank you guys . ask me if there's a part you doesnt understand
 

A:Missing files

If the ext drive is drive E: then run CHKDSK E: /F /R
 

http://www.techspot.com/community/topics/missing-files.191677/
Relevancy 43.86%

I have new Tosh tablet. when I swipe my finger across the screen it always leaves an irritating blue line showing the path of my swipe. Also, the top of the screen always shows coordinate info in 7 small boxes across the top of the screen. It is like it is in a graphics mode & it came out of the box this way. How do I turn that off please?
 

A:Toshiba Excite tablet scrolling

Have you tried a fresh restart of the tablet? Contact Toshiba support or your phone provider for additional help
 

http://www.techspot.com/community/topics/toshiba-excite-tablet-scrolling.191144/
Relevancy 20.21%

Hi all of you, I am pretty sure there is already a thread helping with this subject, but I have tried, and seems I am unable to do so. I am stuck with the error message on start up saying
C:\Users\Utilisateur\AppData\Roaming\avimg.dll unable to find the file.
I have use ccleaner, malawarebites, and few other things. Seems I have been able to delete the medfos.ca trojan, but now I am left with this message.

I have seen a thread, but been unable to do as they said. Anyone to help with this issue ?
( by the way, french speaking here )
Thanks
 

http://www.techspot.com/community/topics/avimg-dll-missing.188915/
Relevancy 37.41%

I'm not an enthusiast overclocker, so I was wondering if I can safely push my i5 2500K to 4GHz on stock voltages.
I have an ASUS P8P67 motherboard
 

A:Overclocking i5-2500k on stock voltages

I got to around 4.3Ghz with 2600K on stock voltages. From what I've read you should manage 4Ghz no problem with stock voltages with a 2500K. With no hyperthreading the temperatures at this speed should be less than my 2600K, so it should not even be a problem with stock heatsink from Intel. Although I'd still advocate using the Asus software to monitor the cpu temps.
 

http://www.techspot.com/community/topics/overclocking-i5-2500k-on-stock-voltages.169836/
Relevancy 20.21%

Good afternoon and thanks in advance Last week during a weird power surge in my house my PC started having difficulties and eventually with no warning the BIOS apparently reset itself to factory defaults So for about a week I was working through figuring out a Operating system is missing error However after finally getting missing Network adapter my BIOS set back up and realizing it switched me back to IDE from RAID I got the machine working and everything seemed to be ok except now I cannot connect to the internet When I go into device manager the only Network adapter missing two Network adapters listed are the ones that were created when i installed vmware software last year Prior to the BIOS issue I had no issues what so ever connecting to my home network and even trying to install Legacy devices doesn t bring up the Realtek network adapter the MoBo came with Any Network adapter missing suggestions Long story short After my computer being out of comission for a week after getting it back on my network adapter is missing and I cannot connect to the internet Thanks nbsp

A:Network adapter missing

Try restoring default bios settings then reconfigure your raid. Or disable the net adapter at the bios then boot windows, then reenable it at bios, again check device manager.
 

http://www.techspot.com/community/topics/network-adapter-missing.177957/
Relevancy 20.21%

I have an old HP NC6000 which I installed Windows 7 on. I can not get the SD card slot to work. At first it wouldn't see anything when I put a card in. After installing and un- installing several drivers from HP and Microsoft, now when I put a card in it shows up as being able to eject it If I want to. It does not show up in my computer as removable storage or any thing. I noticed in devise manager there is no SD host adapter listed. There is not even a heading for SD host adapter. The card works on my other laptop which is an NC6400. Do I need to install An SD host adapter?
 

A:Missing SD host adapter

"I have an old HP NC6000 which I installed Windows 7"...

There is probably no Windows 7 SD host adapter driver for this old laptop. Stick with XP
 

http://www.techspot.com/community/topics/missing-sd-host-adapter.177171/
Relevancy 18.92%

Hi,

Restored laptop (Acer Aspire 5735, OS Windows Vista Home Basic 32 bit) to factory settings a few months ago and noticed that there was a lot of space being used up on C: drive even though I hadn't started installing programs and putting files back on to laptop.

Used SpaceSniffer to see where all the space was being used up and it only found the C: drive to have size of 38.1GB even though it should have 69.6GB. Also ran WinDirStat and that also said C: drive had size 38.1GB.

Any suggestions on why there seems to be 31.5GB missing?

Any help would be greatly appreciated,
thanks!
 

A:Missing hard drive space after restoring laptop to factory settings

"it should have 69.6GB"...
Is the drive 80GB unformatted? Did you format the drive when starting the restore? This is known as a "destructive" restore. If you didn't, it is possible that the old Vista files are still on the drive, along with the new files, taking up the space
 

http://www.techspot.com/community/topics/missing-hard-drive-space-after-restoring-laptop-to-factory-settings.175311/
Relevancy 19.35%

Hey guys My internet provider has just recently been switched to Time Warner Cable They came by and hooked everything up to my desktop and my internet worked for that day The next day I had to call technical support and road runner services because my computer says I m connected but I m not sending nor receiving area Missing network connection and local controller any packets Road Runner took me through Device Manager where I noticed a big yellow question mark near Other Devices Network Controller Also after going through my Network Connections there s no Local Area Connection listed The techs responded that they couldn t help me unless I fixed my computer software I have already tried going through Computer Management and checking Plug And Play Services amp RPC Missing network controller and local area connection Services Any other suggestions are much appreciated I m currently working off of my laptop because I can t get online with my desktop Any requested information would just Missing network controller and local area connection be done by my usb flash Missing network controller and local area connection drive Thank you so much for your time nbsp

A:Missing network controller and local area connection

Open device manager. Uninstall those device with ? on them. Reinstall drivers for your network adapter.

What devices are listed under network adapter?
 

http://www.techspot.com/community/topics/missing-network-controller-and-local-area-connection.174762/
Relevancy 20.21%

im running a dell optiplex L In the My Computer Im missing the CD drive the specs are as follows Specifications Dell OptiPlex L User s Guide Processor Processor type Intel Pentium and Intel Celeron design provides for future Dell-supported upgrades Level L cache KB or KB depending on your computer configuration Level L cache -KB -KB -KB or -MB depending on your computer configuration pipelined-burst eight-way CD drive missing set associative write-back SRAM Memory Type -MHz or -MHz DDR SDRAM NOTE DDR memory runs at MHz when configured with -MHz FSB processors NOTE DDR memory runs CD drive missing at MHz when configured with Pentium -MHz FSB processors Memory Architecture dual-channel DDR SDRAM Memory connectors Memory capacities - - -MB or -GB non-ECC Minimum memory MB single-channel mode MB dual-channel mode NOTE Between and MB of system memory may be allocated to support graphics depending on system memory size and other factors Maximum memory GB BIOS address F h Can anyone help me on this nbsp

A:CD drive missing

This is a fairly old computer. Optical (CD/DVD) drives fail after time. Replace the drive...
 

http://www.techspot.com/community/topics/cd-drive-missing.171959/
Relevancy 20.21%

Hi there ive just started getting this problem with my pc,every time i try to connect to the net is closes internet explorer down,this just happened the last few days now i cant get on the net with that computer,it was doing it every now and again but now it is perminant,a message did appear saying no network devices have been found ?? also it says that i should enable my network adapter/ any suggestions will be grately appreaciated,i have tried my broadband provider and they say its not my modem,and that it is more lickly to be a IT problem.:grinthumb
 

A:Network adapter is missing

How are you connecting to the Internet
{cable vs dsl modem vs dial-up}?

who is your ISP?

What is the make/model of your Modem?

What is the version of Windows you are using {XP, Vista, Win7}?

The SP level of it?

The Edition { home, pro, starter, ultimate, ... }?
 

http://www.techspot.com/community/topics/network-adapter-is-missing.171560/
Relevancy 37.41%

I have a pentium 4 2GB processor with a stock video card. The screen went blank and I pulled the video card to look at it. The screen is a year old and I am using the DVI port. I plugged my old monitor into its VGA slot and still nothing. So, I bought a new video card the exact same as the one I have that isn't working. Still nothing from both the DVI port and VGA port. I can't see the screen at all. I recently put new memory stick in it, but it worked just the same before/after install..... What now? Its old but trusty and I don't want to stick a small fortune in it.
 

A:Stock computer looses video

To rule out issue w/ your display, have you tried plugging it into a different computer?
 

http://www.techspot.com/community/topics/stock-computer-looses-video.171311/
Relevancy 19.78%

So, my mom brought home this computer and I started it up, and it was brand new, like, operating system still not installed. So, I popped in the cd that was in a case that came with it [everything matching the system settings, etc.] and installed the operating system. So, I'm thinking: Huh, what luck! ...Wrong. I plugged in the Ethernet chord to connect it to the internet, and it's not even pulling up an LAN Icon. So, I go into Device Managers, and the Network Adapter is missing. So, I'm lost. Any of you smart people got any advice?
 

A:Ethernet plugged in, but LAN icon missing?

After you installed the operating system, did you install all of the drivers including the LAN driver?
 

http://www.techspot.com/community/topics/ethernet-plugged-in-but-lan-icon-missing.170149/
Relevancy 19.78%

The drive has a 7.45 GB capacity and says it has 1.80 GB free. When I select all the folders in it there total size is 51.5 MB on disk (yes I remembered to show hidden files). I use to get the error that the disk is not working correctly and I clicked "fix and scan for bad sectors" and it did so and came back with no errors. It use to be used for ReadyBoost but I disabled that and I can't figure where all the space went
 

A:Missing space on USB flash drive

I'm not sure exactly what "Fix and scan for bad sectors" would do to a USB Flash drive since it's my understanding that it's a tool for mechanical hard disks only. If you haven't already I'd backup your data off of the USB flash drive and attempt a format of the memory.
 

http://www.techspot.com/community/topics/missing-space-on-usb-flash-drive.169485/
Relevancy 19.78%

Hi there I m inexperienced when a driver after network adapter Missing thunderstorm it comes to PC s so i apologise in advance After a recent thunderstorm my PC won t connect to the internet any Missing network adapter driver after a thunderstorm more I keep getting a message on the screen saying there is something wrong with my network adapter and i need to install the drivers I ve done some searching on forums for the last days and have tried lots of solutions but keep drawing a blank My motherboard is a Biostar A G M and the NIC is onboard I ve been running a bit version of Windows home premium for months which i upgraded from windows XP Below is a list of everything i ve tried already I ve checked BIOS to see if NIC is enabled which was o k I ve done a loop back test ping which came back packets sent and packets received There are lights on the NIC socket on the back of the tower green and orange There is no network adapter tab in device manager I can get this to appear by showing hidden devices but the onboard NIC isn t showing The chipset drivers which came with the motherboard are all for Windows XP so I ve downloaded what i thought was the correct chipset drivers for windows from Boistar Europe and installed them with no change I ve completely unplugged the tower for minutes and pressed the power on button to fully power down the tower as it as awake by LAN option in the BIOS with still no change Any suggestions would be appreciated Thanks in advance nbsp

A:Missing network adapter driver after a thunderstorm

Was theNIC protected from lightening by at least a surge protector.
lighting loves telephone modem lines and easy targets like that.
You have LEDs but if it isn't showing up in device manger it is probably gone. Good news is a new NIC is cheap and easy to replace.
 

http://www.techspot.com/community/topics/missing-network-adapter-driver-after-a-thunderstorm.169016/
Relevancy 19.35%

I'm missing the "local area connection" for a Dell Inspiron 1300 laptop. Hence, I cannot seem to connect to the net.

Anybody got any solutions?

Thanks in advance.
 

A:Local area connection missing, Dell Inspiron 1300

Is your wireless working? Go under your BIOS and see if the WiFi is enabled or functioning. Download any BIOS updates, WiFi drivers update an etc.. If all is done and you still have the issue. Buy USB WiFi NIC Dongle and test that and see if you can get LAN or WAN connection.
 

http://www.techspot.com/community/topics/local-area-connection-missing-dell-inspiron-1300.168709/
Relevancy 31.82%

Alright, so recently my stock cooler for my CPU has been getting really annoying. It seems to get really loud during gaming, with my CPU temps averaging around 43c.

So I decided to grab a new CPU cooler. Ive had my eyes on the
COOLER MASTER V8


But now after a little of reading up on the cooler, I'm a little concern about size and effectiveness. Here's my case if anyone knows if it will definitely fit.
http://www.newegg.com/Product/Product.aspx?Item=N82E16811147047&Tpk=Rosewill armor gaming case

Also,id like to know if there are any other good CPU coolers out their along the same price range, that performs better.

-Thanks In advance
 

A:New CPU cooler to replace AMD 965BE stock cooler

The V8 is still a very good cooler, and was top dog for its time. if you want the top performers now , you are going to pay another $30 for them.

http://www.newegg.com/Product/Produ...00 50001444&IsNodeId=1&name=Thermalright, Inc.

http://www.newegg.com/Product/Product.aspx?Item=N82E16835608018

http://www.frozencpu.com/products/1...Cooler_Sockets_775_1156_1366_AM2_AM2_AM3.html

http://www.frozencpu.com/products/1...Cooler_Sockets_775_1156_1366_AM2_AM2_AM3.html

I have the Silver Arrow (3 fan) cooling an AMD Phenom II x6 1100T @ 4.3Ghz and It's stellar.

Make sure you know the measurements of your case if you are getting a high end cooler.
 

http://www.techspot.com/community/topics/new-cpu-cooler-to-replace-amd-965be-stock-cooler.167347/
Relevancy 36.55%

Needless to say, having the stock fan going absolutely full bore while trying to play Mafia 2 is not fun! I have a Corsair 800D case, but I have not yet focused on the cooling part of things. I built it last week and both side panels are STILL off!

So, air, or water? Either way it will be from Corsair.

The A70 is on sale right now at a local store for $30, regular $65! It is either this or the H70 or H80.

What's the best way to go? My goal is QUIET, I want it to be as quiet as possible.
 

A:Stock cooler on 970BE driving me absolutely nuts

If you decide to go air, I just installed the Thermalright Silver arrow in my machine. It is the coolest and quietest air cooler available. (if you have the chassis for it.)
http://www.hardocp.com/article/2010/11/03/thermalright_silver_arrow_heatsink_fan_unit_review/3
 

http://www.techspot.com/community/topics/stock-cooler-on-970be-driving-me-absolutely-nuts.167059/
Relevancy 37.41%

I have a Phenom II in my PC which has only cores couldn t unlock a th and is running at stock speed I m not much of an overclocker and my limited attempts failed to gain any significant speed The PC has an AM motherboard Gigabyte GA-MA X-UD Recently I encountered some cases where the was just too little for me I m working from home and was running simulations which are single core but sometimes I ran more than one at a time I got to where my PC slowed down all cores were 710 1090T? to II Upgrade stock Phenom at and I could also use a Upgrade stock Phenom II 710 to 1090T? faster single core speed so they finish faster While my usage has changed somewhat in recent weeks more remote work instead of local I still think it s worth getting an upgrade I was hoping that the Phenom II X T will drop in price once Bulldozer appears but since that got postponed and I have someone to bring me the CPU from the US if I order right now I thought it might be a good opportunity especially since my birthday is coming up next month is a little more than I hoped to pay but not really that bad Still I d like to get some opinions about this The benefits I see - Compatible with my current PC no need to upgrade anything else saving money and time - Double the cores which is good for when I need that - Higher core speed GHz GHz with turbo vs GHz - Black Edition so easy to overclock if I want it - Will cost less than the cost me two years ago if I buy it in the US Down sides - Old CPU tech slower than Intel s or the upcoming Bulldozer - It will be harder to make an excuse for a new PC any time soon especially to my wife What do you think nbsp

A:Upgrade stock Phenom II 710 to 1090T?

It is hard to argue with any of your points there, however the performance increase will be profound from the x3 710 to the x6 1090. You can save about $30 (US) and get the 1055T to accomplish the same thing. The Thubans are all the same CPU (unlocked multi excluded)
The Thubans OC easily, and the 1055,1075,1090,1100, will all OC to between 4.0-4.3 Ghz with little effort, and for multi-threaded applications it is very fast. I am running an 1090T @ 4.26Ghz for Video editing,3DSMax,Photoshop CS5, and other adobe applicatiuons and am very pleased with it. Contrary to poplular belief, there are a number of games now that make use of 4+ cores as well.
Here are some numbers to look at.
http://www.guru3d.com/article/asus-crosshair-iv-formula-review/16
I am however awaiting Bulldozer, so good luck with whateveryou decide.
 

http://www.techspot.com/community/topics/upgrade-stock-phenom-ii-710-to-1090t.166734/
Relevancy 20.21%

When I open 'My Computer' there is no DriveD (Cd/Dvd drive) like before. I'm using Windows XP. Please help. Thanks in advance.
 

A:Missing CD/DVD drive

Back in the day's of me using Windows XP, sometimes this very thing would happen to me. For me the fix was simple, I would "refresh" the "my computer" window. Also on some of my clients computers, they would, for not knowing any better, instruct Windows to hide the drive, through it's properties. Just sounds like to me something has gone just slightly haywire and maybe all you need to do is a simple "system restore" to fix this, maybe back to a date that your CD Drive icon was showing.

A question before I go, if you were to stick a audio or data CD inside the CD-ROM drive does it work? If not, than maybe "connectivity" is the issue, answering the above question will help me maybe guide you better on fixing this issue!
 

http://www.techspot.com/community/topics/missing-cd-dvd-drive.166108/
Relevancy 20.21%

Hi all. I am a photographer. Usually I do all files back up. However this ones I didn't. I woke up in the morning and BUM. Files were no longer on my drive. I have not used the drive since then, but need to know what file recovery software would be the best to recover them?

RG
 

A:Recovering missing files

rgboy said:





Hi all. I am a photographer. Usually I do all files back up. However this ones I didn't. I woke up in the morning and BUM. Files were no longer on my drive. I have not used the drive since then, but need to know what file recovery software would be the best to recover them?

RGClick to expand...

u could try the program called recuva, u can dl it here http://download.cnet.com/Recuva/3000-2242_4-10753287.html and give it a shot =P
 

http://www.techspot.com/community/topics/recovering-missing-files.165246/
Relevancy 36.98%

I don't want to tweak voltages as I am a amateur overclocker. So what's a stable overclock at stock voltages?
I have a Hyper 212+ w/ 2 fans (push and pull)
Also, which one should I use to overclock? turbo boost multiplier or the core multiplier?
all replies are appreciated.
 

A:2600K stable overclock on stock voltages?

I think 4.2 Ghz would be ok on stock voltages. also use core to overclock.
 

http://www.techspot.com/community/topics/2600k-stable-overclock-on-stock-voltages.164266/
Relevancy 20.21%

Hi everyone I recived an ASUS PRO G laptop today from a friend in return for fixing his second missing component Laptop laptop he told me it show s an orange charge light and when he turns it on it show s the green lights for - second then it turns off and all the lights go out Another - seconds the charge light comes on again shortly after I didnt know what the problem was i assumed it most likely was out for the count well i got it home and right away gutted it It turns out that its a missing component that appears to have been ripped off the board the problem here is that i have no idea what it is So my question is can you please help me identify a component and find a replacement luckily the Laptop missing component legs for the missing component are kind of still there and so is some blue stuff that came off onto the board I have looked all over the board and came across this witch has the same legs and colour of blue on the bottom of the component it has IR written on it i was thinking that Laptop missing component it might be the same part can anyone tell me Laptop missing component what it is though I have attached picture s Thank you so much to anyone that can help or has any instight nbsp

A:Laptop missing component

look for OEM Power management tools. my Toshiba has a set to control
{standby (orange), hybernate (nothing), charging (green) }
 

http://www.techspot.com/community/topics/laptop-missing-component.163798/
Relevancy 38.27%

An interesting article at Xbit pitting five different (and current) CPU families in a variety of benchmarks in both stock and overclocked form.
http://www.xbitlabs.com/articles/cpu/display/core-i7-2600k-990x.html
Well worth a browse
 

http://www.techspot.com/community/topics/p67-v-x58-v-p55-v-am3-performance-stock-oc.163547/
Relevancy 19.78%

Hi Forum I ve just re-built my desktop machine as its problem - vocals missing sound Wierd internals were years old and really showing their age quot New quot system is Asus mobo P C -e deluxe intel P GHz ati radeon xt vid card SB sound card Win XP Everything clapped Wierd sound problem - missing vocals together no bother so I started into some testing and hit this very strange sound problem Voices vocals are missing - actually they are there but VERY faint - you need full volume to make them out but if music is also there vocals are impossible to hear It s just as if there was a mid-range filter in operation - frequencies either side of voice range are normal There is also a bit of a reverb effect Sound system is a basic speaker system - always checked when doing tests i e no switched on I ve tried removing the sound card and using the on-board chip an Analog Devices AD device - no difference I ve tried different Win XP installations SP and SP - no difference I ve tried Win media player VLC media player and GOM media player - no difference I m running out of ideas here - anyone help with this Many thanks jrmch nbsp

A:Wierd sound problem - missing vocals

some more info

Hi forum,

Some more info on this problem.

Main item is that I when I play the .wma sound samples that come with xp, they come out perfectly. Also, when I stream .wma files they're playing perfectly.

However, mp3 files (from memory stick or streaming) sound all 'out of phase' - sort of all 'swishing around' and very weak vocals.

When I stream videos (You tube) sometimes there is audio (all strange of course) and sometimes none at all.

The fact that the system can play correctly (with the .wma files) tells me that the hardware is all OK along with the sound driver. Problem must surely lie with Codecs or ?

jrmch
 

http://www.techspot.com/community/topics/wierd-sound-problem-missing-vocals.162195/
Relevancy 19.78%

I'm using a Mac Pro (desktop) but running it exclusively in Windows XP 64-bit. Until recently, all 16 GB of RAM was working correctly. Now however only 8 GB of RAM shows up under system properties and DxDiag. However, CPU-Z from CPUID shows 8 slots of memory each with 2 GB (which is indeed what is loaded). Why is there this discrepancy and how can I make the machine use all of it again? Thanks.
 

A:Memory missing from system properties

Has the machine been moved? Even though some software is correctly reporting the memory it would be worthwhile opening it up and checking all the sticks of memory are firmly pushed down and correctly seated in the slots. I'd guess the different software has different methods of querying the system properties. Some might actually query the memory, others might just query what the bios reports which might register the ram details even if it isn't functioning properly.
 

http://www.techspot.com/community/topics/memory-missing-from-system-properties.159844/
Relevancy 19.78%

I have a weird problem Here are the specs Computer A - Intel Quad Core GHz - Win bit Computer B - Intel Pentium GHz - Win bit - Shared drive - no password Network - gigabit wired Same workgroup on both computers Mapped the drive from computer B on computer A as Z drive When transfering let s say files let s say mp s from computer A to Z drive computer B it only transfers about - files At this time if I refresh the folder containing the - files on the mapped drive it will eventually show two more files If I select all files again and try to transfer them to the same location it will prompt my that some files are already there After clicking on quot do not copy quot Missing mapped after a to a files transfer drive it will copy another - files to the shared drive after a refresh to the folder on shared drive there are - more files I can t seem to figure out why this is happening I tried Missing files after a transfer to a mapped drive from another computer win bit via wireless and it never does that to the same mapped drive Any suggestions nbsp

A:Missing files after a transfer to a mapped drive

No ideas? Am I the only one with this issue?
 

http://www.techspot.com/community/topics/missing-files-after-a-transfer-to-a-mapped-drive.155077/
Relevancy 20.21%

Whenever I start up my computer, i get an error message,

"ERROR LOADING WINMPA32.ROM....THE SPECIFIED MODULE COULD NOT BE FOUND"

How do i resolve the issue
 

A:Missing ROM files?

Blaze, can you make sure you are giving us the exact spelling because there is absolutely nothing on the whole internet concerning WINMPA32.ROM.
 

http://www.techspot.com/community/topics/missing-rom-files.147839/
Relevancy 20.21%

Great site thanks guys. don't know if this is of use but here goes anyway.
Purchased 500 gig internal laptop drive, fitted it inside a usb case, plugged it in, windows confirmed new hardware found etc, went to my computer, it wasn't there.
Scratched head for a while, opened device manager which informed me the drive was working correctly, disabled and re enabled the drive, still not there.
Brainwave : Opened EASEUS partition master, the drive was listed as disk 2, I partitioned and formatted it and gave it a drive letter.
Went back to my computer and there it was.
This saved me a trip to the computer shop and a bill.
 

http://www.techspot.com/community/topics/missing-drive-found.153641/
Relevancy 20.21%

After formatting mu computer my CDROM does not show up in My computer or on desktop. However it is working properly and shows up in the BIOS. There's no "!" or "?" in Device Manager and its there.

However in all the fixes that take me to the bit about lower and upper filter values, they do not appear in the line they are supposed to.

I run XP. I also tried that applicacion called dvdunhide and nothing happened.
Please help!
 

A:My CDROM icon is missing

1.) Did you install the drivers for your CD drive?
2.) Does it auto-play anything when you put a disk in?
 

http://www.techspot.com/community/topics/my-cdrom-icon-is-missing.153203/
Relevancy 37.84%

Hi I m trying to help my dad build his new PC but we re having a major problem with the heatsink We looked at the little stupid manual telling us how to install it and it looked as straight stock in going 650 Problems with i5 heatsink not forward as any other heatsink so my dad puts in one of the four pegs then the diagonal one to it won t go in we both try for a very long time trying Problems with i5 650 stock heatsink not going in to get them in but they won t go After deliberating at what to do next and thinking about removing the heatsink my dad tests one of the other two pegs and it goes in by mistake as he s testing the tension on it we think we should probably put the other one in that Problems with i5 650 stock heatsink not going in isn t giving us a problem and that goes in without next to no pressure also So right now we have three out of four of the Problems with i5 650 stock heatsink not going in pegs in but the last peg just doesn t want to know it does seem that it has tapered a little already so maybe that s stopping it going through the hole first at which point it should taper to make it secure but now we really do not know what to do We can t find any help on how to remove it except for the rubbish pictures in the intel manual showing the heatsink with four up arrows and so the building has ground to a halt Anybody got any ideas or advice on what to do next Thanks for your time Tom nbsp

A:Problems with i5 650 stock heatsink not going in

here you go, this is for LGA 1366 but it still should work for you.

DIY Guides: How To Install/Remove Intel Socket 1366 CPU and Heatsink
 

http://www.techspot.com/community/topics/problems-with-i5-650-stock-heatsink-not-going-in.153240/
Relevancy 37.41%

I hear everyone saying that the stock fan that comes with the Intel i7 quad core processor is trash. I am looking for suggestions on which one to possibly upgrade to. I would like to slightly increase performance from 2.8GHz to around 3.2GHz. Nothing major but i would much rather be safe then have a melted CPU and short-circuited motherboard.
 

A:i7 processor stock heatsink inadequate?

This Cooler Master has received some rave reviews; http://www.newegg.com/Product/Produ...103065&cm_re=Hyper_212-_-35-103-065-_-Product

Unfortunately Newegg has persisted in jacking up the price since that occurred.

Microcenter has this at a walk-in price of about 30 dollars, if you're fortunate enough to live near one.

I actually bought one of these from them, but never hung it, as my i3-530 runs so cool at stock speed, there doesn't seem to be much point. Keep in mind the 530 is only 73 watts TDP max (idles @ about 26 watts), your CPU is a bunch more. (130 Watts TDP).
 

http://www.techspot.com/community/topics/i7-processor-stock-heatsink-inadequate.151555/
Relevancy 37.41%

cooler is rather large with copper base and what looks like copper headers lol
downloaded cpuid hv monitor
cpu 85c
mainboard 33c
core 0 49c

core 1 51c

cpu vcore 1.57v

+12v 12.67

vbat 3.17


seems a little hot to me guys

shouldn't a higher performance fan like this do better

fans all working and running approx. 3600 rpms

your thoughts are most appreciated

thanx
 

A:AMD 6400+ running at 85c with a stock cooler

Try seeing what your bios is telling you about cpu temp. is this a stock cooler?
when was the last time you applied new thermal compound?
Have you recently moved the computer? any gap at all, even a .001" gap will heat things up
third, download a different temp program to verify that reading.
and is that reading under load , or idle?
 

http://www.techspot.com/community/topics/amd-6400-running-at-85c-with-a-stock-cooler.151348/
Relevancy 20.21%

Hi, My computer has 320 gb hd., I add/installed new 1tb hard disk, and it's working normally, i save all downloaded movies and music in that hd. until the problem came, the icon suddenly disappeared, i looked in the disk management and it's not there, i reboot to see if it will detected but still no luck..i removed the connection of that 1tb hd, but the system did not boot up.. what could be the possible reason and solution for this problem...

thank you very much...
 

A:Missing hard drive

The hard drive could have failed suddenly (It happens, but rarely), or a loosely inserted cable came loose. Cables are notorious for failure as they age and components shrink in dry air or heat. Then it can be an infestation, or Windows error... or heat related issues.
It could also be a failing power supply where one section continues to work, causing the fan to blow air, but the power to the drive or board is dead in some way.
First test would be to unplug and reseat all cables. Then trying another drive.
 

http://www.techspot.com/community/topics/missing-hard-drive.150551/
Relevancy 20.21%

i have a toshiba satellite L305-S5919, i cant find anything that can help me either re-install the driver or card not sure what it is, or anthing to maybe update what i might have.

i also currently cant get internet on that computer and am using my sisters right now. i have been downloading and saving to mem. card then installing on the other computer.

anything would be helpful and greatly appreciated!!

thx in advance
 

A:My vga graphics adapter is missing

there are known issues with this laptop and Nvidia graphics processors installed on them. You need to take the laptop to someone capable of circuit board level repairs as in many cases the chip will have to be re-flowed.
 

http://www.techspot.com/community/topics/my-vga-graphics-adapter-is-missing.147983/
Relevancy 20.21%

Hi all well i have a job in i did an image drive so i have files on a good drive.
but here is the problem it is telling me the files are empty ???? i know 100% that the files had data on
it is a seagate 1tb 7200.12 so tell me what is the deal is it a segate thing do i have to get the segate startup working
do the files have coding at the start?
 

A:Data missing on Seagate 1TB

The 7200.11 and the 7200.12 have had some serious issues. A shame too because I'm running two Seagate 250 gig harddrives and they have been great.

Check out this link I read just yesterday: http://forums.anandtech.com/showthread.php?t=2068653

I would contact Seagate immediately and let them know of this issue and you want it "fixed." keep us up-to-date.
 

http://www.techspot.com/community/topics/data-missing-on-seagate-1tb.146183/
Relevancy 19.78%

HI

I have a dell dimension 3100 and it's using a Sigmatel High Definition Audio Codec.

I have had several unsuccessful attempts at resolving a problem with it.

Some time ago some of the windows components associated with it such as the audio mixer and volume control (that I think were in the accessories menu) have disappeared...

When I go into my system devices I can't change anything from here either as it says I don't have the software or certain files installed on the machine and i need to reinstall them from 'add/remove windows components' but they are not listed there.

I can't find any downloads or driver updates to replace them.

Any ideas?

Thanks
 

A:Missing windows components from Sigmatel driver?

just stumbled across your post... Are you still having the problem?
 

http://www.techspot.com/community/topics/missing-windows-components-from-sigmatel-driver.143546/
Relevancy 19.35%

My Sony VGC RB38G runs Windows Media Center 2005 Xp, the hdd is orginal still, and is fuctioning yet and is only 250GB. I bought a 500GB Seagate Barracuda and used the Seatools to Clone, yet it will not start. I can see it in My Computer as drive F and I can see in the BIOS.

Any help here???
 

A:Cloning a hdd in XP new drive gets message Missing Operating System

So you cloned the 250GB to 500GB. So does the 500GB have XP on it or are you just using it as a additional storage. You might want to do that. Leave the 250GB as the Primary C: then have the 500GB as archive media storage. There you can have all your music, pictures, music for Media Center 2005. This way you don't have to clone the HDD.

C: 250GB (OS/Programs/MCE)
D: 500GB (Media)
E: DVD/CD
 

http://www.techspot.com/community/topics/cloning-a-hdd-in-xp-new-drive-gets-message-missing-operating-system.144759/
Relevancy 19.35%

Hi folks My Lenovo Athlon desktop came with Windows XP Home installed on a drive that has the EISA recovery partition Later I installed Vista Home Premium on two other HDDs I have in the desktop Now in order to do a clean install of bit Windows I need to clean boot the system from the Windows installation CD but my desktop won t boot from CD DVD RW drive I changed BIOS startup sequence to have the CD drive first follows from w/EISA Desktop Can't partition: boot missing CD, NTLDR by the primary HDD containing XP which is on the disk that has the EISA the CD light comes on at bootup and it starts spinning but then the light goes off and system shows the normal bootup OS selection screen showing all the OS s available to boot from and asking me select one Then I also tried removed the primary XP drive Desktop w/EISA partition: Can't boot from CD, NTLDR missing from the BIOS startup sequence so that the CD is the only drive there now upon bootup again the CD lights up and starts spinning as earlier but then I get quot NTLDR is missing press ctrl alt del to restart quot I have tried the Windows CD on another laptop and that booted fine and showed me the Windows install screen - so the CD is definitely bootable I have also verified all jumpers cables etc and they seem to be okay Would appreciate any help with this issue Is my CDDVD drive bad i e unbootable Or is the EISA partition the culprit nbsp

A:Desktop w/EISA partition: Can't boot from CD, NTLDR missing

"then I get "NTLDR is missing, press ctrl+alt+del to restart"...

This message means that the computer is still "looking" for a boot hard drive, and not an optical drive. You should see "boot from a CD/DVD, press any key" message. The boot device selection is still incorrect. Make sure the bios detects the Optical Drive(s) correctly
 

http://www.techspot.com/community/topics/desktop-w-eisa-partition-cant-boot-from-cd-ntldr-missing.142803/
Relevancy 19.78%

Correct me if I'm wrong

(Working with old computer, getting it to work)
I was having problems with re-installing Windows XP and SP1-3 updates, and connecting to internet.and getting DNS errs.
Went into ipconfig, and had no default gateway

So, I eventually found my way to windows error reports,doing a search:
for "setuperr"

Turns out the "computer name" had errors in it with non-allowed characters.
Went into Control Panel, clicked on System, did the fix.
No underlines, etc. allowed

Looking into setuperr logs is really helpful, dont ya think?
 

http://www.techspot.com/community/topics/missing-default-gateway-dns-server.142171/
Relevancy 38.27%

im after something better then the stock cooler for my lga 775 Q9550, from the link below or or any sites please recommend one to me, price limit is $60 AUD

im looking for a good balance between noise and cooling, good cooling and not noisy.

http://www.techbuy.com.au/search.asp?what=BeginSearch&srchFilterSubCat=&srchNumRecs=20&srchQuery=ALL&srchCat=COOLING_CPU_FANS&srchBy=&srchManuf=%25&srchSortBy=2&min=40&max=$60.00&rbSrchType=ALL&recMax=500&Page=1


thanks for the help.
 

A:Best cooler other than stock?

Are you planning to overclock?
Will your chassis accept a tower cooler based on a 120mm fan design ? (You will need approx 160mm of space between the motherboard and the side of the case)
From the Techbuy site these are good coolers:
http://www.techbuy.com.au/p/78580/COOLING_CPU_FANS/CoolerMaster/RR-CCH-LB12.asp
http://www.techbuy.com.au/p/86540/COOLING_CPU_FANS/Xigmatek/CAC-SXHH3-U03.asp
http://www.techbuy.com.au/p/132192/COOLING_CPU_FANS/Xigmatek/CAC-SXHH4-CK2.asp
http://www.techbuy.com.au/p/114953/COOLING_CPU_FANS/ZEROtherm/ZT-NV120PWM.asp

The Cooler Master Hyper 212 would be the best performer.

If you limited to approx <130mm of space then this:
http://www.techbuy.com.au/p/120117/COOLING_CPU_FANS/Xigmatek/CAC-S9HH3-U03.asp

the 3R Systems Iceage 120 (especially the Boss II variant if within your price range), Thermalright Ultra-90, Sunbeamtech Core-Contact Freezer (120 and 92mm fan versions) would also be good choices.

The Arctic Cooling Freezer 7 range are cheap but not a huge step up from the stock Intel cooler- ok if you plan on no (or mild) overclocking.

My second system runs a tower cooler (Sunbeamtech Core-Contact Freezer- the 120mm version) on top of a Q9400 running at 3.6GHz ( 425 x 8, 1.25v in BIOS) 24/7 at 33-37 C idle, 45 C (approx) normal load, 47-52 C using OCCT torture test (Prime95 small/blend FFT). These are summer temps when the ambient (room) temp is 26-34 C.Most good coolers in a well ventilated chassis will give similar results.
 

http://www.techspot.com/community/topics/best-cooler-other-than-stock.140563/
Relevancy 19.35%

After considerable time and effort, I managed at last to find the correct Sound Max driver for this machine. The history is: Bought a used machine Compaq EVO d310, for personal and not technical reasons I must use Win2k O/S, HP does not provide drivers for Win2k Only for XP. When I finally got the right driver, at the next boot I received an alert "No adi codec driver found". In the device manager, all audio functions display as working properly. Now what???
 

A:Missing adi codec - sound devices sd1891-a -win2k

For personal reasons? Almost all Windows computers can run XP now. This is a laptop? You can use a USB sound device on it. Here is an example:
USB Audio Device
 

http://www.techspot.com/community/topics/missing-adi-codec-sound-devices-sd1891-a-win2k.139831/
Relevancy 20.21%

Hey everyone,

I am currently using a PC and I use an Iomega 1TB external hard drive to hold my Mp3's so they dont slow down my computer. Well the other day I went on to my ITUNES and tried to play music but it all was missing. I then Checked the file on my Hard Drive and all of the folders were there, but the Mp3s were missing. The folders would contain the album art and whatnot but none od the MP3s were in any folder.

This collection is pretty much priceless to me so any help getting them back would be great!
 

A:6500 MP3's Missing on External HD

You might try file recovery software like Recuva

If you want to be extremely cautious, you might want to first create a sector-by-sector "clone" of your drive so you can preserve it's current state (because some recovery procedures can modify the drive as it attempts recovery) but that would require you have another large drive to store the clone copy. EASUS disk copy can create the clone for you
 

http://www.techspot.com/community/topics/6500-mp3s-missing-on-external-hd.139803/
Relevancy 19.35%

Hi guys,

I've accidentally reset my bios and now whenever I boot it says "missing operating system"! I have an Alienware Aurora and I really don't want to reinstall the whole os... please help is there a way I can get it back??
 

A:Accidently reset BIOS.. missing operating system help

Running Bios Setup Defaults should not have done that
Unless you have your Windows system drive not connected internally in the right spot?
 

http://www.techspot.com/community/topics/accidently-reset-bios-missing-operating-system-help.139577/
Relevancy 19.78%

Hello all, first time poster although i often come to the boards to find solutions. You'll have to bare with me as I'm not that computer savvy (even though i think i am). Basically I have a Fujistu Esprimo Mobile v5505. I got fed up of Vista and thought i would install my old XP pro. I partitioned my drive and installed XP, i then formatted the drive that Vista was on. I came back and when i turned on my computer i got the NTLDR is missing error, now i would be able to deal with this but I cant even enter the bios to change boot options (which were set to flash, cd, HD). Before I fiddled with my laptop I had the options on the Fujitsu load up screen to enter BIOS/change boot options etc not anymore. I hope someone can shed some light on this matter.

Cheers

Jason
 

A:NTLDR Missing + Can't access bios

well, if ur post happens too fast for u to see anything on the screen u can try to press the pause button on the keyboard
If it displays only the logo but not the post summary, try pressing esc key several times or try to hold down a key or you can also try different keys like (del, f10, f2,) etc.
I hope this helps
 

http://www.techspot.com/community/topics/ntldr-missing-cant-access-bios.139172/
Relevancy 20.64%

I have the Asus Rampage II MOBO which allows up to 12 GB of triple channel RAM. I had 6 2GB Chips of OCZ Platinum installed.

A few days ago My computer's CPU fan Stopped working and the emergency alarm went off. I was able to fix that by installing the stock fan my CPU came with.

When I booted it back up however In bios and in windows it only displays that I have 8GB of RAM. I tried reinstalling them to make sure they were set right and tried moving them around but still only 8GB.

Is there anything I can do to get them working? Am I missing something?

Thanks for your help.
 

A:Missing RAM?

Try running Bios defaults

This settings area can be called:
Bios Setup
CMOS Settings
System Setup
even just Setup
You can enter it by pressing the keyboard key that is displayed on your screen when first turning on your computer
Its sometimes:
A Fn Button like F1, or F2, or F10 or some other Fn key
DEL key
(whatever the computer states on screen when you first turn on your computer)
Once in Bios Setup, locate Setup Defaults (sometimes called Optimized Defaults)
Apply it, then Save and Exit Bios Settings (which is usually F10, but it will tell you in the Bios Settings screen)

If that doesn't help try 1 Ram card at a time, seeing if you first get 2Gig on your first Ram card
Continue on (shutting down each time) until you find the possible Ram at fault
 

http://www.techspot.com/community/topics/missing-ram.138117/
Relevancy 18.92%

I tried to find the link to introduce myself, and couldnt. I am not very technically advanced. My laptop (its an older one with windows xp operating system home) (my new one was stolen and I am quite depressed about it) now this problem.
I am using my sons laptop now.

I do not have any discs but blank ones. Can someone halp me? My computer will not start, it just displays that message, and when i press f8, safe mode and everything comes up but it never does anything
 

A:Compaq 2700 <Windows root>\system32\ntoskrnl. exe is missing or corrupt

The hard drive (boot drive) is bad or its contents are corrupted. With no discs, you might want to take it to a friend or to a repair shop to have it repaired
 

http://www.techspot.com/community/topics/compaq-2700-windows-root-system32-ntoskrnl-exe-is-missing-or-corrupt.137562/
Relevancy 20.21%

I have a HP desktop with Windows XP that I attempted to install a Linksys wireless router to. Prior to installing my internet, which is through cable modem, was working fine. After attempting to install, I was no longer able to connect to the internet and the IP address on my 1394 connection was gone. It says connected and when I go under properties for it shows a blank spot where the IP address is supposed to be. I clicked repair but it says "TCP/IP is not enabled for this connection". I also have a Local Area connection 3 and a Local area connection 4 both state Limited or no connectivity. The 4 is VIA Rhine II Fast Ethernet Adapter and the 3 is Intel 21041-Based PCI Ethernet Adapter. I no longer have the Linksys router and am just trying to get back on internet with that computer. Can anyone help me try to re-establish an IP address?
 

A:Missing IP address

Do you actually have a network adapter attached to your Firewire (the IEEE 1394) connector?. I'm guessing not and guessing you never had an IP address there

More likely you have network adapters on your Ethernet ports (which are what the other LAN connections you see are referring to)

Click Start->Run, then copy/paste the command line below.
Code:
cmd /c ipconfig /all > "%userprofile%\desktop\ipconfig.txt"
The command will put an ipconfig.txt file on your desktop. Please attach it to your next post
 

http://www.techspot.com/community/topics/missing-ip-address.137457/
Relevancy 19.35%

Hello and thank you in adance.
I am reinstalling XP on my Dell XPS 600 (had ubuntu but need Windows again) and at the onset of the install XP gives me an error that it cant detect my HD (I lost the original XP reinstall CD).
No problem got the drivers from Dell"s tech support site. Extracted the files onto floppy drive but now during the install XP is missing some txtsetup.oem file...Dell wants me to renew warranty fro $150 bwfore they help.
Any ideas where i can find this file?

Thax again
 

http://www.techspot.com/community/topics/maxtor-7v250f0-250gb-sata-3-0gb-missing-txtsetup-oem.137002/
Relevancy 19.35%

Hello everybody I m new here and I found a lot of useful information already However I am at a loss as to how I can solve this problem It boot Attempted from Missing SATA NTLDR drive, is similar to other problems yet not quite I will explain First my specs Custom Built Unit Cooler Master Casing ASUS M A -T MoBo Dual Core Attempted boot from SATA drive, NTLDR Missing - MoBo has one slot for IDE and the rest is SATA gig Seagate Barracuda SATA HDD s Initially set as slaves gig Attempted boot from SATA drive, NTLDR Missing Seagate IDE HDD initially set as master Now that we have that bit of information taken care of here s the issue My gig IDE showed signs of imminent failure I had no money to buy another hard drive immediately so I partitioned one of my g hard drives and re-installed on that one I currently use this new installation which is D instead of C I attempted to remove the IDE drive and kept receiving an NTLDR missing press ctrl alt del to restart error After doing some researching here and other places I discovered that this shows up when trying to load from a non-bootable device and that Windows by default loads the NTLDR file into the C drive and if unable to find it will not know what to do I wanted to name the drive to the new partition quot C quot but of course there was already a drive with that letter so I had to go with quot D quot Do i have to change the drive letter to quot C quot If so will all of my program installations files etc - reflect that change I don t want to leave this bad drive in my PC because when it fails and you know it will I don t want the rest of my system dependent upon it you know Any help would be greatly appreciated Thanks guys n gals nbsp

A:Attempted boot from SATA drive, NTLDR Missing

Your 750G is not bootable thus the NTLDR missing error.

More info on how you partitioned your 750G HDD. Download PARTINFO, extract and run. Post screenshot.
 

http://www.techspot.com/community/topics/attempted-boot-from-sata-drive-ntldr-missing.136515/
Relevancy 19.78%

I am looking for a driver for a webcam i got for christmas a few years back i just found it and i cant seem to find any information or drivers for it maybe someone on here knows its a camera shaped like a dragon it looks like its made of some kind of hard ceramic the dragon is wrapped around the actual quot camera quot part of for driver webcam name/manufacturer Missing and a the device i found a picture that Missing name/manufacturer and driver for a webcam looks a lot like it but mine stands taller and its blue the eyes of the dragon glow red Missing name/manufacturer and driver for a webcam i do remember when the camera is on the only other information i can find on it is on the bottom it has a sticker stuck to it it reads quot AP- NWB Dragon PC Camera quot and the barcode but of course i cannot find any manufacturers with the name or initials of NWB nor can i find any information on the model number listed above it wont let me put the link to the picture on the post so please if anyone can help me it would be appreciated thanks nbsp

A:Missing name/manufacturer and driver for a webcam

Have you seen this thread in the Device Drivers forum?: http://www.techspot.com/vb/topic123880.html

BTW, don't take this the wrong way but a little punctuation would make your post much more readable.
 

http://www.techspot.com/community/topics/missing-name-manufacturer-and-driver-for-a-webcam.133419/
Relevancy 19.78%

Ok here s the deal I woke up yesterday morning and turned on my laptop and I noticed that everything was running a little now manager missing? was boot PC slow, slow and a lot was freezing up It s gotten progressively worse and even Windows Task Manager says Not Responding Now here s the worst part I was trying to download the free AVG virus protection software since my Symantec expired I figured it must be a virus spyware malware trojan whatever I had a the Windows malware thing running and then everything just stopped Explorer AVG Malicious Software Removal everything quit so I tried to open Task Manager and it wouldn t work So i shut down my comp and now when I try to restart it no luck it says that it failed to restart and gives me options to open Command Prompt or do System Restore I have no restore points and I can t find the system restore disk I ve only had this comp since december and I don t know what went so terribly wrong Please help nbsp

A:PC was slow, now boot manager missing?

you're going to have to either get a new manufacturer disk or buy a copy of the OS to install.

if you still have issues, then it's hardware related.
 

http://www.techspot.com/community/topics/pc-was-slow-now-boot-manager-missing.132507/
Relevancy 20.21%

Hello folks,

My problem is that my DVD-ROM drive on my laptop is missing. It is not showing up in Device Manager either. I tried Microsoft's fix by removing the lowpass and highpass filters in the registry. This worked for a few minutes and I could use my DVD-ROM drive but soon I had the same problem again. I formated and reinstalled the OS (running vista). My DVD-ROM drive was working again, only for a few minutes then it was gone again. I downloaded the latest drivers from Acer and again, my drive was working. After I ran some windows updates, my DVD-ROM drive disappeared again. Does anyone have any ideas or suggestions to a permanent fix.

Thanks!
Antil0ck
 

A:DVD-ROM drive is missing

If it is more than a year old, or if it has had a lot of use, it may have burned out. Some of the little devices inside do burn out like a bulb, and other things go awry as they age.
We find that once they begin to fail, you are out of luck.
Keep your old one, as new drives may not have all the exterior hardware... and you can save money by buying a basic unit, then adding on the framework, sliders, etc., yourself.
We recommend Teac and Toshiba, followed by Plextor, LG and Samsung. Most of our clients have terrible luck with Sony, HP, HLDS or HL, and the other 87 makers.
We may, perhaps, be alble to help if you give us the brand and model of the laptop, as well as age, operating system, and hardware configuration.
 

http://www.techspot.com/community/topics/dvd-rom-drive-is-missing.131593/
Relevancy 19.78%

My friend had made my computer and he moved away so i cant ask him anything i dont know what happened to my sound device i dont have a cd and i forgot what it was called Computer PC- B A FA PC-CorleoneKJ Generator kurt Operating Missing Audio Controller Multimedia System Microsoft Windows XP Professional WinXP Retail Date - - Time -------- Summary ----------------------------------------------------------------------------------------------------- Computer Computer Type Missing Multimedia Audio Controller ACPI Uniprocessor PC Operating System Microsoft Windows XP Professional OS Service Pack TRIAL VERSION Internet Explorer IE DirectX DirectX c Computer Name PC- B A FA PC-CorleoneKJ User Name kurt Logon Domain TRIAL VERSION Date Time - - Motherboard CPU Type Intel Pentium MHz x Motherboard Name Gigabyte GA- SD PCI AGP SDR DIMM Audio Motherboard Chipset SiS System Memory TRIAL VERSION BIOS Missing Multimedia Audio Controller Type Award Modular Communication Port Communications Port COM Communication Port Communications Port COM Communication Port Printer Port LPT Display Video Adapter RAGE PRO Ultra GL AGP Microsoft Corporation MB D Accelerator ATI Rage Pro AGP X Monitor ViewSonic VA w- quot LCD QN Multimedia Audio Adapter SigmaTel STAC SiS Audio Device CPU Intel Core Penryn No Intel Pentium Chipset Intel GM GM GS PM No SiS WLAN Intel WiFi Link Series No System Centrino Compliant No -------- Sensor ------------------------------------------------------------------------------------------------------ RasAcd Remote Access Auto Connection Driver rasacd sys Kernel Driver Running Rasl tp WAN Miniport L TP rasl tp sys Kernel Driver Running RasPppoe Remote Access PPPOE Driver raspppoe sys Kernel Driver Running Raspti Direct Parallel raspti sys Kernel Driver Running Rdbss Rdbss rdbss sys File System Driver Running RDPCDD RDPCDD RDPCDD sys Kernel Driver Running rdpdr Terminal Server Device Redirector Driver rdpdr sys Kernel Driver Running RDPWD RDPWD Kernel Driver Stopped redbook Digital CD Audio Playback Filter Driver redbook sys Kernel Driver Running ROOTMODEM Microsoft Legacy Modem Driver RootMdm sys Kernel Driver Running rt Ralink n USB Wireless LAN Card Driver rt sys Kernel Driver Stopped RT D-Link DWA- Wireless G USB Adapter Driver rt sys Kernel Driver Stopped RTL xp Realtek PCI NIC Family NDIS XP Driver Rtnicxp sys Kernel Driver Running Secdrv Secdrv secdrv sys Kernel Driver Running serenum Serenum Filter Driver serenum sys Kernel Driver Running Serial Serial port driver serial sys Kernel Driver Running Network adapters Belkin Wireless G USB Network Adapter - Symantec Network Security Miniport Belkin Wireless G USB Network Adapter Direct Parallel D-Link DWA- Wireless G USB Adapter - Symantec Network Security Miniport D-Link DWA- Wireless G USB Adapter Realtek RTL Family Gigabit Ethernet NIC - Symantec Network Security Miniport Realtek RTL Family Gigabit Ethernet NIC WAN Miniport IP - Symantec Network Security Miniport WAN Miniport IP WAN Miniport L TP WAN Miniport PPPOE WAN Miniport PPTP -------- Device Resources -------------------------------------------------------------------------------------------- DMA Exclusive Standard floppy disk controller DMA Exclusive Direct memory access controller IRQ Exclusive System timer IRQ Exclusive Communications Port COM IRQ Exclusive Communications Port COM IRQ Exclusive Standard floppy disk controller IRQ Exclusive System CMOS real time clock IRQ Shared Multimedia Audio Controller IRQ Shared Microsoft ACPI-Compliant System IRQ Exclusive MPU- Compatible MIDI Device IRQ Exclusive PS Compatible Mouse IRQ Exclusive Numeric data processor IRQ Exclusive Primary IDE Channel IRQ Exclusive Secondary IDE Channel IRQ Shared RAGE PRO Ultra GL AGP Microsoft Corporation IRQ Shared Realtek RTL Family Gigabit Ethernet NIC IRQ Shared SiS PCI to USB Open Host Controller nbsp

A:Missing Multimedia Audio Controller

In your listing, the Multimedia device is your Sound Device.
This may be your driver... http://www.bioticaindia.com/sigmatel-stac9721-23.html

What I would like for you to do is this...
First
Go to Start -> My Computer and RIght Click.
Click on Properties.
Click on Device Manager.
Scan down through the list...
Do you see any red x, or yellow circles (or yellow triangles) with Exclamation Marks?
(it would probably be in the section called "Sound, Video, and Game:.

If there are no issues here....

Second... Double Check your speakers...
Are they attached to your sound card (and plugged into the correct jack)?
Are they plugged in to their power source (or do they have fresh batteries)?
Are they turned on?

Third,
If you do not have a speaker icon in your system tray,
Go to Start -> Control Panel -> Sound and Audio Devices - Double Click on this icon...
On the Volume Tab... Make sure that your sound is not muted (a check box)- and make sure the slider is not set too low.
Check the Speak Volume Button for the same issues.
Back at the Device Volume section, Click the Advanced button, This will bring up a control panel that looks like a mixer board.
Make sure that your sliders are not set to zero, and not checked "to Mute".

If you DO have the speaker icon in the system tray, it will bring up the Mixer Board mentioned above.

Fourth; make sure that your external volume control, (if you have one) is not set too low.

Lastly, When you say you don't have a cd, are you referring to a "driver disk"?

Are any of these helpful?
 

http://www.techspot.com/community/topics/missing-multimedia-audio-controller.131491/
Relevancy 19.78%

I recently (last week) came across a problem I couldnt find the answer to. Eventually after tinkering around I figured it out(as Im not that good with Vista...still)

Did your harddrive go missing after you backed up ur pc or just disappeared all of a sudden?

if so check this out

right click my computer > click Manage > click Disk Management >

now look at your internal hard drives, does 1 not say formmated or "uninitialized"? If so easy fix to get that hard drive back!

right click, select initlize (format) and blamao let it work its magic( takes a few minutes depending on the size of the drive) Once it's done you should be good togo!

Hope this helps a few people, as it helped me after finally figuring out "initilized" meant format o.O
 

http://www.techspot.com/community/topics/do-you-have-vista-and-your-hard-drive-is-missing-click-here.131443/
Relevancy 20.21%

Hi - winXP disk management no longer shows drive letters but just drive names for all the partitiions on four hdd. My dvd has a letter!
Also I note that when I select 'change drive letter & paths' I am not given the current drive letter nor the option to 'add, change, remove'
The drive letters show up in windows explorer
I must have done something but know not what. Any ideas would be appreciated.
TKIA
 

A:Drive letters missing

Riley50 said:





Hi - winXP disk management no longer shows drive letters but just drive names for all the partitiions on four hdd. My dvd has a letter!
Also I note that when I select 'change drive letter & paths' I am not given the current drive letter nor the option to 'add, change, remove'
The drive letters show up in windows explorer
I must have done something but know not what. Any ideas would be appreciated.
TKIAClick to expand...

Very interesting to hear! 'cuz i just happened to notice the same anomaly on my own version of Windows XP SP3 within the last coupla days!! (i.e. drive letters appear normally in Windows Explorer and all works well. yet Disk Management doesn't show the drive letters for your my HDD partitions!)

Anyone else also see the same??? In any case, will let you know if i should find why this is happening (but appears to not just be you!)

/* EDIT */
Hmm... but let me one thing that may be different (tho still odd). For my case:
1) If i click Change Drive Letters and Paths i DO have the Add button option
2) If i click Add, it does still available drive letters

But it's the simple display of drives and volumes in disk management that's not showing assigned drive letters (is what's in common with what you repport)
 

http://www.techspot.com/community/topics/drive-letters-missing.130439/
Relevancy 38.27%

when you buy a procesor and it is BOX it conteins a fan cooler...
do i need any other cooler system for my procesor or only that does the work?
 

A:CPU stock fan cooling enough?

If you are not going to be playing heavy CPU intensive games or overclocking, the stock supplied CPU heatsink/fan will be ok
 

http://www.techspot.com/community/topics/cpu-stock-fan-cooling-enough.130594/
Relevancy 19.35%

Hi folks,


I passed from Vista 32 bit to Vista 64 bit but my dual screen options in Nvidia Control panel are missing!
I was using it to expand my gaming screen to two 22 inch LCD Monitors but Vista 64 bit driver has problems about it?
Do you know how can I solve this problem?


My specs

E8400
GTS 250
GA-X48-DS5 Mobo
4GB Ram
1TB Hard Drive
Vista 64 bit
 

A:Nvidia Control Center Dual Monitor Options Missing?

Pls help my problem

Pls Help to my problem
 

http://www.techspot.com/community/topics/nvidia-control-center-dual-monitor-options-missing.130120/
Relevancy 19.78%

Hi all,

Need some help if poss?? Have a USB 2gb flash drive which is currently saying it only has 3mb storage capacity

I have re-formatted the drive, and it is currently in NTFS format. All hidden folders are active, so I can only assume there is no more data on there at all, so don't know why I am missing the rest of my storage

Has anyone come across this before? The only possible thing I can think of is something to do with the partioning etc but I don't know enough to be able to fix this.

Thanks in advance for any help
 

A:Missing Storage on USB Flash Drive

Try formatting in FAT, not FAT32 or NTFS
 

http://www.techspot.com/community/topics/missing-storage-on-usb-flash-drive.128383/
Relevancy 37.41%

Hey all i have a stock intel cooler and want to overclock my cpu it is the G0 stepping model i was wondering what is a the maximum temps that would my cpu could handle for a 24/7 overclock?
 

A:Overclocking a Q6600 with stock cooler

You won't get far with just a stock cooler. I suggest you get a custom cooler, they don't cost you much, like the budget killing Arctic Cooling Freezer 7 Pro or the OCZ Vendetta 2.

Its pretty risky overclocking with a stock cooler... max temps i would allow is 80 on full load.
 

http://www.techspot.com/community/topics/overclocking-a-q6600-with-stock-cooler.127655/
Relevancy 36.98%

I just built my first system.


SAPPHIRE 100245HDMI Radeon HD 4850 512MB 256-bit GDDR3 PCI Express 2.0 x16 - $86

Antec Sonata Designer 500 Silver Steel ATX Mid Tower Computer Case 500W - $80

SAMSUNG Spinpoint F1 HD103UJ 1TB - $82

AMD triple core 720 ? combo ($219 CPU + MOBO)

LG Black 22X (CAV) DVD+R 8X DVD+RW - $25

OCZ 4 gig ram - free

****ing shipping - $8

Total: $500

I ran out of money to buy a cpu heatsink, what would be the appropriate overclocking for a phenom II 720 black edition on stock heatsink?

Thanks.
 

A:Stock overclocking for AMD Phenom II 720 Black Edition?

You tell us when you have the stock heatsink installed and the system is up and running stable
 

http://www.techspot.com/community/topics/stock-overclocking-for-amd-phenom-ii-720-black-edition.127700/
Relevancy 36.98%

Hi I have a Cooling settings issue AMD 4200 stock X2 AMD x processor running at default settings for the processor voltage and speeds along with SPD settings for the memory I have an ABIT AN Ultra MOBO with AMD X2 4200 Cooling issue stock settings the most current bios update installed My problem is that while in Vista and monitoring my tempatures of Core and Core I see them Idle at C and C respectivly My first question is is this normal for the core s to be at different tempatures Then when I run the cores at usage for about seconds the temps jump to C and C I thought that tempature seemed to be a bit high considering the temp in the room is only about deg F I replaced the stock cooler with a heat pipe cooler from Comp USA when they existed It is made by quot Zalman quot I have tried pulling this cooler off and reapplying the thermal grease and ensured it s thin and consistant I ve also verified that the fan is running at full speed when the processor hits C and verified it via monitoring programs I m wondering if anyone can tell me for sure if this cooler will run on a MOBO that is standing vertical correctly and if anyone has any suggestions as to how to lower the temps Everything I read on here seems to lead me to believe that with stock settings I should not see much over C with a good cooler I m not positive this is a good cooler but I know I paid a lot for it One other thing to note is that I can touch the base of the cooler the copper pad portion while at processor usage and it feels body temp I m unable to AMD X2 4200 Cooling issue stock settings get to the processor because of the size of the base of the cooler Also of note i ve tried to overclock this and can run the processor up to mhz and still not have the temps climb over C Any suggestions or adivce would be very welcome Thanks nbsp

A:AMD X2 4200 Cooling issue stock settings

Hi Tim,
different core temps (at least different readings) are common for for the athlon x2 series. I have a x2 4200 in another machine and it is almost identical to your readings. I even have a copper Zalman 7000 'flower' series cooler on it. i would try a different program to confirm temps, however 55c is well within recommended operating temps. max temp for the 4200 is 71c.
here is another program you can use to confirm your temps. http://www.cpuid.com/hwmonitor.php.
I have not been impressed with the Zalman copper coolers for the Athlon x2's not that they let the cpu overheat, but the 'heat pipe' coolers seem to work so much better.
hope that helped
 

http://www.techspot.com/community/topics/amd-x2-4200-cooling-issue-stock-settings.127520/
Relevancy 37.84%

Hey guys i just want to know if i would be able to overclock my amd phenom II 810 2.6GHZ to 3.00GHZ with a stock cooler by amd.???
 

A:Stock heatsink for OC Phenom II 810

It is aways good to use a quality 3rd party cooler in any computer, not just for overclocking abilities, where it is very necessary
 

http://www.techspot.com/community/topics/stock-heatsink-for-oc-phenom-ii-810.126554/
Relevancy 19.35%

Hi Everyone. I have my new Dell Latitude D620 that i purchased and have recently wiped the hard drive. However, i have now realized that my desktop OS disc is not working to install windows onto my laptop. Are there any other ways to install windows without purchasing 200-300$ software? Any help would be greatly appreciated. Thank you.
 

A:Missing Windows OS disc for Dell Latitude D620

If it is a new machine, then you can get a replacement from dell. Just let them know the one you have will not complete the install. If it was purchased from a 3rd party and is used, Find out if it is still covered under warranty. If it is, ask that person to call dell and do a change of ownership. Once there system shows you as owner (or you get the info used when they purchased and/or registered the computer, if you bought from a friend) you should be able to get help from Dell.

Good Luck. Let me know how it turns out.
 

http://www.techspot.com/community/topics/missing-windows-os-disc-for-dell-latitude-d620.60447/
Relevancy 20.21%

Want to buy an open box motherboard from newegg. What all items will be missing.. Anybody know

KK Lenin
 

A:What is missing in open box mobo

umm

"Newegg.com offers a 15-day refund-only return policy for all open box merchandise. Remember if you purchase a Open Box product you will receive an OEM BAREBONE item, meaning you will only receive the item itself. Accessories are NOT INCLUDED with Open Box products, even if the missing accessory is required for the item to function properly."

from the webb site it self
 

http://www.techspot.com/community/topics/what-is-missing-in-open-box-mobo.126220/
Relevancy 19.78%

Multimedia Video Controller PCI\VEN_4444&DEV_0016&SUBSYS_813D104D&REV_01\4&2CF26B65&0&2820 This device is not configured correctly.

Is what it says in the MSINFO32. I got the device from a computer my friend had. I thought Windows Driver Detector could fix it for me, but was unable to. I've been having a lot of difficulty try to find drivers to use this. Any help would be fantastic. Please tell me if you need more information.
 

A:Missing Multimedia Video Controller Driver

Start with a look through this thread. You have the identical device.
/* EDIT */
In general, you might also look here for the drivers from your system manfacturerClick for the driver page listed my System Vendor Find your System Vendor, click for their driver support site. Enter your model number, then download your drivers as needed
 

http://www.techspot.com/community/topics/missing-multimedia-video-controller-driver.125711/
Relevancy 19.78%

I bought a 2nd hand IBM ThinkPad Lenovo r61i some a little while ago. i never got any driver cd's with it but i've installed all the drvers i can find but Device manager still seems to think theres a few things that are missing drivers, could anyone give me a hand.

Base Laptop Specifications :
* Intel® Core? 2 Duo T5450 (1.66 GHz)
* Genuine Windows Vista Home Premium
* 15.4? WXGA TFT with integrated camera
* 1 GB / 4 GB, DDR2 SDRAM
* 120 GB, Serial ATA
* DVD Recordable, 24X Max
* Bluetooth Version 2.0 + EDR / PAN
* Intel® Graphics Chipset
* Weight 2.91 Kg
* Integrated Gigabit Ethernet

and i know the chipset is Intel GM965 Express

Any ideas? thanks
 

A:Lenovo R61i Missing drivers?

Go to the IBM support site and download and install the chipset drivers for your model laptop. Did the laptop come with Vista or is this an upgrade from XP?
 

http://www.techspot.com/community/topics/lenovo-r61i-missing-drivers.125229/
Relevancy 19.78%

I have a client's machine on which one of his darling little brats has created or reset the BIOS password and now denies all knowledge of the thing. I seem to recall there is either a means of generating the default password from the Service Tag or, failing that, shorting out one of the motherboard chips. That I have done before but would prefer to know which chip it is.
The system is a Dell Dimension 3100.
Anyone able to help before I condemn the thing to perdition and a drop kick into the neighbours wheelie bin?
 

A:Missing Dell BIOS (boot) password

Difficult task.
What you describe will not happen. But you can check with Dell support to see if the computer is registered to that owner. Then Dell will send someone out as an authorized service rep with a little disk that runs the fix... and has a cost.
I would first see if the hard drive can be accessed while installed in an external USB enclosure.
If it can, then even if passworded, you can put in a replacement drive. And Dell XP install disk will work.
Then you can buy a Dell motherboard on eBay. Many Optiplex boards are cheaper, and work better than the Dimension boards... for a cheaper price... around $70 to $85.... or refurbished Dell government computers are for sale at PCSurplusonline for $120 to $180 with shipping... just move the board into the 3100. And the dell OS will work.
 

http://www.techspot.com/community/topics/missing-dell-bios-boot-password.123040/
Relevancy 17.2%

HI Here again asking stupid questions I have a quot TP-Link Mbps Gigabit Ethernet PC Card quot and first I installed the original drivers from the cd that came with the card and got an error message Windows cannot load the device driver for this harware The driver may be corrupted or missing Code Click Troubelshoot to start the troubelshooter for this device Ok so I click and then i only get an empty screen So I downloaded the newest drivers and GB TP-Link Drivers "corrupted or missing" LAN installed them but it says still the same So the next thing I did was google and from there I found loads of random sites and then ofcourse Microsofts support site so I tried it and it says st Click Troubleshoot to start the Troubleshooting Wizard The wizard asks you some simple questions and provides a solution to your problem based on the answers that you provide If the Troubleshooting Wizard is not available go to step Follow the resolution steps provided by the wizard to resolve the problem Yeah good TP-Link GB LAN Drivers "corrupted or missing" luck when I only get an empty window where even not the search works So what to do btw the card is installed in a quot Dell Dimension XPS T quot and before that it was in my other computer and worked just fine nbsp

A:TP-Link GB LAN Drivers "corrupted or missing"

Hi

last time i saw this i was trying to get a WIFI nicon XP working on a nasty pcworld laptop, it was built for vista and no matter what i tried i couldnt find the drivers for it, all the ones i tried gave me the code 39 error.

The cure, i used the restore disk and driver disk to put Vista back on the laptop and it worked fine.

Seems to be a case of find the right driver for it, although its possible that the card has gone faulty, have you tried it back in the PC to make sure.?
 

http://www.techspot.com/community/topics/tp-link-gb-lan-drivers-corrupted-or-missing.124649/
Relevancy 19.78%

please help i have a HUGE issue at hand i had recently installed norton goback and after it not installing correctly i uninstalled it with the removal utility after boooting into windows xp i have a missing since SATA 1TB seagate uninstall goback pro and home version on two different drives my ubuntu linux partition isnt working im going to live cd 1TB SATA seagate missing since goback uninstall it soon my tb 1TB SATA seagate missing since goback uninstall drive isnt showing in windows explorer in disk management console it 1TB SATA seagate missing since goback uninstall is showing as there with free and no drive letter all it says to do is format it and help i cannot assign it a drive letter i had gigs of data backed up onto this all of this is either irreplaceable or will be extremely hard to get again if anyone has any ideas please help plasma edit - live cd ubuntu isnt showing it either think trying a program to recover a lost partition would work edit - gonna try http www cgsecurity org wiki TestDisk Download wish me luck nbsp

A:1TB SATA seagate missing since goback uninstall

TestDisk worked thank god. Problem solved, 300 gigs of data recovered, topic able to be closed

~plas
 

http://www.techspot.com/community/topics/1tb-sata-seagate-missing-since-goback-uninstall.124119/
Relevancy 19.78%

Hello all,

Weird problem. I hooked up a linksys device to one of my laptop to change settings on it. Now that I have unhooked it. For some reason, there is no longer a network tab under the properties of my wireless card! I have enabled the wired and wlan config in services but it still will not come back! I'm trying to configure a wireless connection with the internal wireless card like I normally do. The tab is just no longer there! I have no idea why and I'm lost.

Any ideas? Remember this is Vista there is no wireless zero configuration just the wired and wlan config.
 

A:Wireless network tab missing in Vista

Is your copy of Vista updated to SP1? What version of Vista are you running? Is your system clean and free of viruses and other malware. By Network tab, do you mean the word "Network" in the start menu?
 

http://www.techspot.com/community/topics/wireless-network-tab-missing-in-vista.123639/
Relevancy 19.78%

This will be the third time this has happened since Christmas and nobody has a clue what has happened I hope this is the right forum for this post To try and cut a long story short- Decided to build a computer I am new to this and dont know much themselves. changed NTLDR is missing letters Drive but got help putting it together Worked fine for a week or so then wouldnt boot Got NTLDR file missing errors Took out TB drive found it faulty dealer replaced it Installed new drive it was faulty from the off I could hear it and was changed for a different make of drive TB Now weeks after install and working fine I turn off one night turn on the next morning and the computers asking for a boot disk Went to do a reinstall over the top of the old OS and discovered that what was my C drive with Windows XP was now the E drive and the D drive with XP was now the C drive Drive letters changed themselves. NTLDR is missing And it wont boot up from it because quot NTLDR is missing quot I have a feeling this is what happened to the first install but I never noticed the drive letters Any idea what may have caused this Hardware- Asus P Q Deluxe Motherboard CPU Intel Quad Core Duo Q overclocked to Zalman Reserator V Fanless Water Cooling System X OCZ GB Reaper Mhz PC Memory Coolermaster W Real Power M Powersupply BFG GTX OC Graphics Card TB Samsung SATA HD GB Samsung PATA Drive GB Seagate SATA Drive Creative Fatlity Platinum sound card Internal card reader PCI-Express x FireWire and x USB Ports I O Card Sony DVD Rom Drive LG DVD Drive Dual boot if it would ever work properly Windows and XP nbsp

A:Drive letters changed themselves. NTLDR is missing

Hi Chegwell,

My first reaction to this is that the battery that holds the PC's BIOS settings (and system date, etc.) whilst the machine is switched off, is faulty.

Try accessing the Bios (usually by hitting DEL or F1, F2) while the PC is booting, set the hard drive priority to SATA, save and reboot.

Good Luck,

Taff.
 

http://www.techspot.com/community/topics/drive-letters-changed-themselves-ntldr-is-missing.123495/
Relevancy 37.84%

right now my motherboard has the default voltage at 1.2500 volts. idle temp is about 39c but under load its about 55c with stock intel box cooler. i have read over places that the voltage should be 0.85V ? 1.3625V oh i have the E0 stepping
 

http://www.techspot.com/community/topics/stock-e8500-voltage.122975/
Relevancy 19.78%

Hello,
I recently bought a used Panasonic Toughbook CF-73. I formatted and re-installed Windows XP. I am unable to find a few drivers, mainly the audio driver. I have tried updating through Microsoft/Windows Update to no avail. I have Everest installed and I am attaching the report. Any help in resolving this issue would be greatly appreciated.
Thanks in Advance!
 

A:Missing Panasonic Toughbook Hardware

On our toughbooks, we find everything we need on the Panasonic support site. Try starting with
http://www.panasonic.com/business/toughbook/fully-rugged-computers.asp
then keep searching on Panasonic support for the drivers you need. There is nothing that is missing from that site, unless something happened in the past three days.
 

http://www.techspot.com/community/topics/missing-panasonic-toughbook-hardware.121604/
Relevancy 19.78%

im new here, and i didnt know where to turn to. or if anyone had the same problem but i will put it out there.

I have a Seagate 100 gig Hard Drive and i used Partition Magic 8 from DOS to partition the spaces. i dont know much of the program aside from knowing that all it can do is split spaces.

out of 100 gigs, i split one parition to 30 gigs
i left the rest about 70 gigs unallocated
i press apply totally forgot to turn the 70 gigs of unallocated space into its own partition.

now when i start windows..i can see my 30 gig space. but where did my 70 gigs go
i went back into Partition Magic 8 (Dos) and all i can see is 30 gigs, i can parition that. Did partition magic delete my 70 gigs?

how can i get my 70 gigs back?

please help me, i will be checking back every 10 minutes till this problem is solved
 

A:Missing Hard Drive Space

on My computer icon-right click it, choose Manage under Storage single click Disk Management now you can see the 70 gig unallocated...right click it and choose format(to proper the drive for using it..

right click the unallocated drive and choose format(to prepare the drive for using it)...pls. reply if it works
 

http://www.techspot.com/community/topics/missing-hard-drive-space.121148/
Relevancy 20.21%

Hey, this is my Motherboard. In the description it has Quad 10/100/1000 Mb/s Ethernet, But as you can see in the picture there are only 2 ports.

- Does Quad Ethernet mean what i think it does, (4 ports)
- If i can have up to 4 ports, how can I supply those?

I'm thinking a PCI Card...

What's the heck do you say?
 

A:Missing Ethernet ports?

Code:
Onboard LAN
LAN Chipset 4 x Realtek 8111C
Max LAN Speed Quad 10/100/1000Mbps
this means you have the (4x) Realtek Nics on the motherboard and
they should have access ports on the rear for standard RJ45 cable connections.
 

http://www.techspot.com/community/topics/missing-ethernet-ports.120587/