Windows Support Forum

User page to user desktop page problem

Q: User page to user desktop page problem

I am using windows xp with two user accounts. Both desktops have minimal folders and stuff on desktops. The problem is when either user tries to go from the user page to the individual desktop. Very slow, sometimes paints black screen for sometime, sometime repaints desktop few times, sometimes goes back to user page.. and sometimes actually goes directly to the desktop.. very confusing. Anybody got any ideas what is causing this software behavior.
Thanks
GRSadow

Relevancy 100%
Preferred Solution: User page to user desktop page problem

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: User page to user desktop page problem

Hello & welcome to TSF,

could you check your device manager to see if you have any (red or yellow) quotation marks

if you do then this means you have driver issues / note down what they are and getback to us

also you need to follw this link

http://www.techsupportforum.com/secu...sting-log.html

you will need to note any probs, that you have with any of the steps/ save all logs to the desktop for ease of retreival ( DO NOT POST BACK HERE AT THIS THREAD) you will need to go to the (HJT LOG forum) here at this site / make sure that you tell the techs there of all problems when posting

stand strong for the techs there are busy

Mike

http://www.techsupportforum.com/forums/f10/user-page-to-user-desktop-page-problem-206067.html
Relevancy 88.15%

Of 3 users on W7 system one is unable to print any web page within IE (V 9.05). Print Preview shows blank page. Print will print just a blank page. Both of the other users can print web pages from within IE just fine. Note the problem account is able to print web pages from Firefox, just not IE.

Any help will be appreciated.

Denis

A:One user cannot print web page in IE while others can

Hi Denis,

Have you tried resetting the IE settings and reinstalling IE on that user account?

http://www.sevenforums.com/browsers-mail/220359-one-user-cannot-print-web-page-ie-while-others-can.html
Relevancy 88.15%

I switched off today and switched back on and now have only 'other user' on the login page. All of my normal user logins have disappeared

So, I cannot get past this.

Anyone got any ideas?

Thanks

Eddie (from my netbook)

A:Only have 'other user ' on login page

Hello Eddie, and welcome to Seven Forums.

You might see if doing a system restore using a restore point (if available) dated before this happened may be able to help.

If the above is not an available option for you, then you might see if the tutorial below may be able to help even though you only have the "other user" part.

Logon Screen - Fix Showing Only "Other User" and Last Logged On User

Hope this helps,

Shawn

http://www.sevenforums.com/general-discussion/246508-only-have-other-user-login-page.html
Relevancy 88.15%

Hi - I ve been trying to peruse the forums and though it seems like lots of folks have similar issues not seeing any common fix Basically having the problem that after doing a google search and clicking on a link that was returned I get redirected to various other web pages Here s some general things WinXP - all latest updates installed IE Firefox Norton Internet Security and AdAware running real time protection Here s what I had tried to date before finding this forum Reset IE settings to defaults uninstalled re-installed IE redirects page Another user Web with ran SpyBot - fixed found issues ran full system scan with AdAware - fixed found issues ran full system scan with Norton - nothing uncovered during scan though since then a few things have been reported as blocked cleaned ran quick and full scan using Malwarebyts Anti-Malware and cleaned all it could Ran the quot fixit quot program from Microsoft Ran Another user with Web page redirects RegClean to clean out old registry items Though some issues were reported - nothing really worked So - I ve followed recommended steps on this forum web page Ran the defogger - though I don t believe I am running any kind of CD emulation - ran it just in case Ran the DDS program attaching logs Ran GMER attaching log I d really love any help or suggestions I was guided to this webpage from some suggestions I found elsewhere that this was the place to run a very effective utility combofix but I ve also read enough here to know that there might be some level of danger so I haven t downloaded or tried that yet - Another user with Web page redirects thought I would wait for some advice first Thanks very much all -Scott Copy of text from dds txt DDS Ver - - - NTFSx Internet Explorer Run by Alex at on - - Microsoft Windows XP Professional GMT - AV Lavasoft Ad-Watch Live Anti-Virus Enabled Updated A C F E - FDE- -AFAE- EFC EDE AV Norton Internet Security Enabled Updated E A - - -B - C C F AV Smart Engine Enabled Updated E -D BF- AF- C- F ED B AV Internet Security Essentials Enabled Updated BFE C - B B- - C-C FFEB FW Smart Engine Enabled FW Internet Security Essentials Enabled FW Norton Internet Security Enabled Running Processes C WINDOWS system svchost -k DcomLaunch svchost exe C WINDOWS System svchost exe -k netsvcs svchost exe svchost exe C Program Files Lavasoft Ad-Aware AAWService exe C WINDOWS system spoolsv exe C WINDOWS Explorer EXE C WINDOWS RTHDCPL EXE svchost exe C WINDOWS system nvraidservice exe C Program Files Common Files Apple Mobile Device Support AppleSyncNotifier exe C Program Files iTunes iTunesHelper exe C Program Files LogMeIn Hamachi hamachi- -ui exe C Program Files Google Google Desktop Search GoogleDesktop exe C Program Files Dell Support Center bin sprtcmd exe C Program Files Common Files Apple Mobile Device Support AppleMobileDeviceService exe C WINDOWS system ctfmon exe C Program Files Skype Phone Skype exe C Program Files Google GoogleToolbarNotifier GoogleToolbarNotifier exe C Program Files Bonjour mDNSResponder exe C Program Files LogMeIn Hamachi hamachi- exe C Program Files Hi-Rez Studios HiPatchService exe C Program Files Java jre bin jqs exe C Program Files Skype Plugin Manager skypePM exe C Program Files Norton Internet Security Engine ccSvcHst exe C Program Files NVIDIA Corporation nTune nTuneService exe C WINDOWS system nvsvc exe C Program Files Macrium Reflect ReflectService exe C Program Files Microsoft Search Enhancement Pack SeaPort SeaPort exe C Program Files Dell Support Center bin sprtsvc exe C WINDOWS system svchost exe -k imgsvc C WINDOWS system SearchIndexer exe C Program Files Canon CAL CALMAIN exe C Program Files Norton Internet Security Engine ccSvcHst exe C Program Files iPod bin iPodService exe C Program Files Lavasoft Ad-Aware AAWTray exe C Program Files Mozilla Firefox firefox exe C WINDOWS regedit exe C WINDOWS system wuauclt exe C WINDOWS system NOTEPAD EXE C WINDOWS system SearchProtocolHost exe Pseudo HJT Report uSearch Page hxxp www goog... Read more

A:Another user with Web page redirects

Hello and welcome to Bleeping Computer We apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here. If you have since resolved the original problem you were having, we would appreciate you letting us know. If not please perform the following steps below so we can have a look at the current condition of your machine. If you have not done so, include a clear description of the problems you're having, along with any steps you may have performed so far. Upon completing the steps below another staff member will review your topic an do their best to resolve your issues. If you have already posted a DDS log, please do so again, as your situation may have changed. Use the 'Add Reply' and add the new log to this thread. Thanks and again sorry for the delay. We need to see some information about what is happening in your machine. Please perform the following scan:Download DDS by sUBs from one of the following links. Save it to your desktop.DDS.scr DDS.pifDouble click on the DDS icon, allow it to run. A small box will open, with an explaination about the tool. No input is needed, the scan is running. Notepad will open with the results. Follow the instructions that pop up for posting the results. Close the program window, and delete the program from your desktop.Please note: You may have to disable any script protection running if the scan fails to run. After downloading the tool, disconnect from the internet and disable all antivirus protection. Run the scan, enable your A/V and reconnect to the internet. Information on A/V control HERE We also need a new log from the GMER anti-rootkit scanner. Please first disable any CD emulation programs using the steps found in this topic: Why we request you disable CD Emulation when receiving Malware Removal Advice Then create another GMER log and post it as an attachment to the reply where you post your new DDS log. Instructions on how to properly create a GMER log can be found here: How to create a GMER logThanks.DR

http://www.bleepingcomputer.com/forums/t/405579/another-user-with-web-page-redirects/
Relevancy 88.15%

Not sure if this is the right section for this I m having a problem with IE that s driving me mad It s that bloody page faults & new hjt page user fault in user exe and some various dll s I ve done the deselect inline options deltree history command in dos mode reselect new hjt user & page faults inline options I ve done a repair on ie and rebooted I ve done the spybot search and atm new hjt user & page faults I m down to Backweb lite CoolWWWSearch eacceleration and new hjt user & page faults IGetNet all of which I have no clue what to do with I downloaded hijackthis to see if maybe it s something else causing these damn illegal op s I just don t know how to read the logs o Here s the log and yes I m terribly aware lockdown k is a giant p o s and need an update of software Logfile of HijackThis v Scan saved at AM on Platform Windows SE Win x A MSIE Internet Explorer v SP Running processes C WINDOWS SYSTEM KERNEL DLL C WINDOWS SYSTEM MSGSRV EXE C WINDOWS SYSTEM MPREXE EXE C WINDOWS SYSTEM mmtask tsk C WINDOWS EXPLORER EXE C WINDOWS TASKMON EXE C WINDOWS SYSTEM SYSTRAY EXE C ANTIVIRUS LOCKDOWN LOCKDOWN EXE C WINDOWS LOADQM EXE C MOUSE SYSTEM EM EXEC EXE C KMAESTRO KMAESTRO EXE C WINDOWS SYSTEM STIMON EXE C PROGRAM FILES CLEARSEARCH LOADER EXE C EFDTOP DTLOADER EXE C MY DOCUMENTS DESKTOP DICONS DICONS EXE C EFDTOP WINXSERVER EXE C WINDOWS SYSTEM WMIEXE EXE C PROGRAM FILES AMERICA ONLINE WAOL EXE C PROGRAM FILES AMERICA ONLINE SHELLMON EXE C WINDOWS SYSTEM SPOOL EXE C WINDOWS SYSTEM DDHELP EXE C WINDOWS SYSTEM RNAAPP EXE C WINDOWS SYSTEM TAPISRV EXE C MY DOCUMENTS SECURITY HIJACKTHIS HIJACKTHIS EXE R - HKCU Software Microsoft Internet Explorer SearchURL http www jethomepage com ie R - HKCU Software Microsoft Internet Explorer Main Search Bar about blank R - HKCU Software Microsoft Internet Explorer Main Search Page http www jethomepage com ie R - HKCU Software Microsoft Internet Explorer Main Default Search URL http www jethomepage com ie R - HKCU Software Microsoft Internet Explorer Search SearchAssistant http www jethomepage com ie R - HKLM Software Microsoft Internet Explorer Main Search Bar http search presario net scripts redirectors presario srchredir dll c c amp lc amp s search amp i enu R - HKCU Software Microsoft Internet Explorer Main Window Title Microsoft Internet Explorer provided by GCR Online R - HKCU Software Microsoft Internet Explorer SearchURL Default http search presario net scripts redirectors presario srchredir dll c c amp s search amp query s amp i enu O - BHO no name - EF - - - C - AA A DA - no file O - BHO no name - B - B - A- F- A C AE - no file O - BHO no name - F ADBE - C - -B E - AA EE - no file O - BHO Clear Search - E D A- B F- CF - B - CA D - C PROGRAM FILES CLEARSEARCH IE CLRSCH DLL O - Toolbar msdxmLC dll email protected amp Radio - E - F- D - E- A C - C WINDOWS SYSTEM MSDXM OCX O - Toolbar no name - F ADBE - C - -B E - AA EE - no file O - HKLM Run ScanRegistry c windows scanregw exe autorun O - HKLM Run TaskMonitor c windows taskmon exe O - HKLM Run SystemTray SysTray Exe O - HKLM Run LoadPowerProfile Rundll exe powrprof dll LoadCurrentPwrScheme O - HKLM Run ProDsl C WINDOWS ProDsl exe P O - HKLM Run LockDown C ANTIVIRUS LOCKDOWN lockdown exe O - HKLM Run LoadQM loadqm exe O - HKLM Run EM EXEC C MOUSE SYSTEM EM EXEC EXE O - HKLM Run KeyMaestro C KMAESTRO KMaestro exe O - HKLM Run StillImageMonitor C WINDOWS SYSTEM STIMON EXE O - HKLM Run ClrSchLoader Program Files ClearSearch Loader exe O - HKLM RunServices CPQDFWAG C WINDOWS cpqdiag CpqDfwAg exe -I O - HKLM RunServices LoadPowerProfile Rundll exe powrprof dll LoadCurrentPwrScheme O - Startup EDLoader lnk C EfDtop DTLoader exe O - Startup Shortcut to Dicons exe lnk C My Documents Desktop Dicons Dicons exe O - Startup America Online Tray Icon lnk C Program Files America Online aoltray exe O - Extra context menu item AltaVista Home - http jump altavista com avie home O - Extra context menu item AV Search This Term - http jump altavi... Read more

Relevancy 87.29%

I have a Dell Dimension desktop Until last night I was having trouble doing anything on my computer After start up my outdated version of Norton would pop up saying a virus was found I couldn t get anything page. Can't selection XP the past get user else to respond and the Can't get past the XP user selection page. window would never go away So I eventually got it to stop and the I ran various spyware registry and anti-virus utilities to the point where my computer was working flawlessly Then I decided that I would just uninstall Norton since I installed a new anti-virus program I hadn t updated it in over a year and I never really liked it anyway Can't get past the XP user selection page. It took over an hour to remove I think because the quarantine folder was so large I chose to remove everything including the quarantine folder After the uninstall successfully completed I restarted the computer I got to the Windows XP user selection screen I have users set up and tried to select my user profile but I couldn t click on it I tried selecting each of the users I have set up but none of them work It just seems frozen Did I screw up by uninstalling every last bit of Norton Did deleting the quarantine folder release viruses back onto my system Is there anything I can do at this point to at least get into Windows so I can run a new virus scan nbsp

Relevancy 87.29%

I been having this problem for months. Everytime I boot up my computer, it makes me click on the user I want to log on in, but the only user on this PC is my own. This is tedious to me because even if I don't click on it my desktop won't load up until I do click on it and it takes about 6 minutes to do so.

A:How to get user accounts out of the Startup page?

Go to start and type in "netplwiz" then uncheck the box that says that users have to enter a username and password to use this computer. Click
"Apply" and it will ask you for your password and a confirmation and then the next time you boot it will not.

http://www.techsupportforum.com/forums/f217/how-to-get-user-accounts-out-of-the-startup-page-705277.html
Relevancy 87.29%

my user, the thing you log onto, has suddenly disappeared and but one user is still there. this user is an administrator. Under the admin's user i went onto the control panel and found all of the users that had disappeared right there. The only problem is I can't get them back on the start screen. This happened after a program was installed. Has anyone had this problem and can they help me?

A:My user has disappeared on the start page

Do a System Restore to before you installed the program, see if that fixes the problem.

Click on Start, type system restore and press Enter to get there.

http://www.sevenforums.com/general-discussion/232898-my-user-has-disappeared-start-page.html
Relevancy 86.43%

I have a bit of as stumper at least for me An employee's laptop is connected to the network just fine she sees her mapped drives gets to the Exchange server and browses the internet But when she tries to access our internal-only intranet website she gets a error I noticed when she gets the error the address changes in the bar We have our intranet set by group policy in the browser options as http xxx xxxx org but when the error displays the address in the bar is http xxx xxxx org cgi-bin restart I have no idea where that is coming from I checked with our web guys and they don't know what that address is either IE is locked down by group policy nothing in the options window can be changed by the user I have uninstalled all other Page Intranet Getting User Home Error 404 for browsers and toolbars thank you Adobe and cleared all caches This employee is the only one having the problem The laptop is Win Pro with IE Can anyone point me in the right direction or give me a hint on where or what to look at

A:User Getting 404 Error for Intranet Home Page

Hi,
If the settings are locked down I don't see allot you can do or us for that matter ?
First thing would be to clear the cache Alt+TD Delete browser history/ Uncheck the top box and check all others.

If you found a bunch of third party crap,
I'd use some scanners to remove anything else that might of slipped in,
Review Jacee’s instructions to run Adwcleaner here post #7,
Ignore the title of the thread,
Instant Savings App
Screen shot of the download button to use for Adwcleaner
You can use these free tools to see if they find anything,
Manually Update them before running full scans,
Try not to use your computer while the scans are running, (one at a time of course).
Uncheck the box to Activate the Free trial from the final install options,
Also use the Custom scan option not the Threat scan,
Select the drive to scan usually C,
If your really infected check the box to scan for Rootkits = this scan option will take several hours to complete,
Never use your machine while scans are running for best results,
Please Do Not clean/ Delete or Remove Any detections before posting the scan results first before review especially Malwarebytes,
http://www.malwarebytes.org/products/malwarebytes_free
SAS is safe to remove anything it finds
http://www.superantispyware.com/?tag=SUPERANTISPYWARE
This one is the longest up to 4 hours, the others are only about 45 minutes,
http://www.microsoft.com/security/scanner/en-us/default.aspx

http://www.sevenforums.com/browsers-mail/342315-user-getting-404-error-intranet-home-page.html
Relevancy 86.43%
A:pointer is stuck in the middle of my other user page

Welcome to TSF

Not much info to go off of.
First question is have you tried another mouse? Try removing device from Device Manager and reboot allowing the driver to reinstall. Can you use the keyboard to navigate using the Windows key and Tab key?

http://www.techsupportforum.com/forums/f217/pointer-is-stuck-in-the-middle-of-my-other-user-page-488399.html
Relevancy 86.43%

split from http www techsupportforum com f ly- html Quote Originally Posted by djf Ther were lots of viruses and spyware which i was Non Area only in one Page Fault Paged on user able to removed using spyhunter malwarebytes spybot bitdefender nod superanmtispyware spydoctor avg panda and kaspersky Anyway there are users on this pc but only Page Fault in Non Paged Area on one user only one of of them gets that blue screen with error message Page Fault in Non Paged Area and dumping memery It appears just after i login to this user it does the same thing in safe mode All the other users works fine for some reason I tested Ram with mem and had pass checked both hdds both ok I did a windows repair too but didn't fix it I put new RAM too to make sure it wasn't the ram problem I did a PC-Check CPU stress test too If it happens only to one user I would think it isn't a hardware problem or can it still be DDS Ver - - - NTFSx Run by Olsen at on Internet Explorer BrowserJavaVersion Microsoft Windows XP Home Edition GMT - AV ESET NOD Antivirus On-access scanning enabled Updated Running Processes C WINDOWS system svchost -k DcomLaunch svchost exe C WINDOWS System svchost exe -k netsvcs svchost exe svchost exe C WINDOWS system spoolsv exe C WINDOWS Explorer EXE C Program Files Common Files Apple Mobile Device Support bin AppleMobileDeviceService exe C Program Files Symantec LiveUpdate ALUSchedulerSvc exe C Program Files Bonjour mDNSResponder exe C Program Files ESET ESET NOD Antivirus ekrn exe C Program Files Google Common Google Updater GoogleUpdaterService exe C WINDOWS System svchost exe -k HTTPFilter C Program Files Java jre bin jqs exe C Program Files Common Files Symantec Shared PIF B E DD - - c -B F- F FCA A PIFSvc exe C Program Files ESET ESET NOD Antivirus egui exe C Program Files LogMeIn x LogMeInSystray exe C Program Files Microsoft ActiveSync wcescomm exe C Program Files LogMeIn x LMIGuardian exe C WINDOWS system ctfmon exe C Program Files Google GoogleToolbarNotifier GoogleToolbarNotifier exe C Program Files ArcSoft TotalMedia Backup amp Record uBBMonitor exe C PROGRA MICROS rapimgr exe C Program Files LogMeIn x RaMaint exe C Program Files LogMeIn x LogMeIn exe C Program Files LogMeIn x LMIGuardian exe C Program Files Common Files Intuit QuickBooks QBCFMonitorService exe C WINDOWS system svchost exe -k imgsvc C Program Files Common Files Symantec Shared CCPD-LC symlcsvc exe C Program Files IBM ThinkVantage Rescue and Recovery rrservice exe C Program Files IBM ThinkVantage Common Scheduler tvtsched exe C Program Files ThinkVantage SystemUpdate UCLauncherService exe C WINDOWS system WFXSVC EXE C WINDOWS system SearchIndexer exe C Program Files WinFax WFXMOD EXE C Program Files Canon CAL CALMAIN exe C Program Files Pure Networks Network Magic nmsrvc exe C Program Files IBM ThinkVantage Common Logger logmon exe C WINDOWS system mmc exe C WINDOWS system DfrgNtfs exe C WINDOWS system SearchProtocolHost exe C Documents and Settings Olsen Desktop dds scr Pseudo HJT Report uStart Page hxxp mywinnipeg com uSearch Page hxxp www google com uSearch Bar hxxp www google com ie uSearchMigratedDefaultURL hxxp www google com search q searchTerms amp sourceid ie amp rls com microsoft en-US amp ie utf amp oe utf uSearchAssistant hxxp www google com ie uSearchURL Default hxxp www google com search q s BHO RealPlayer Download and Record Plugin for Internet Explorer c e -b - bc - - c ca - c program files real realplayer rpbrowserrecordplugin dll BHO F E - A- B A-BCAF- B BFDFEA - No File BHO CA F - F E- B -A E- E E C C - No File BHO Java tm Plug-In SSV Helper bb-d f - c-b eb-d daf d d - c program files java jre bin ssv dll BHO E D - A- EC-A -BA D E E - No File BHO Windows Live Sign-in Helper d - c - abf- ecc- c - c program files common files microsoft shared windows live WindowsLiveLogin dll BHO Google Toolbar Helper aa ed - dd- d - -cf f - c program files google googletoolbar dll BHO WebPerform ab f b- fe- - -ed bb b - WebPerform Object BHO Google To... Read more

Relevancy 86.43%

First of all this is not my computer. I am just repairing it. Ther were lots of viruses and spyware, which i was able to removed using spyhunter, malwarebytes, spybot, bitdefender, nod32, superanmtispyware, spydoctor, avg, panda and kaspersky.

Anyway there are 4 users on this pc, but only one of of them gets that blue screen with error message Page Fault in Non Paged Area, and dumping memery. It appears just after i login to this user. it does the same thing in safe mode. All the other users works fine for some reason.

I tested Ram with mem86 and had 33 pass, checked both hdds, both ok.

I did a windows repair too, but didn't fix it. I put new RAM too, to make sure it wasn't the ram problem.

I did a PC-Check CPU stress test too.

If it happens only to one user. I would think it isn't a hardware problem or can it still be?

Please advise

A:Page Fault in Non Paged Area on one user only

Hi djf863000 and welcome to TSF !

Could be software, some program that's only installed for that user account, but then it's strange that it happens in safe mode as well since safe mode deactivates most of the programs that start automatically after login. There may be some remnants of the infection, follow these instructions to post your logs : http://www.techsupportforum.com/secu...oval-help.html

Go to start => run and type chkdsk c: /R. Answer y when prompted to schedule the scan for next startup and restart the computer. It'll take some time, once back within Windows go to start => run and type eventvwr.msc. Go to the application section and double-click the last winlogon event to see the scan's results. Report if any errors were found.

Create a new user account and copy the old user account to the new one : How to copy data from a corrupted user profile to a new profile in Windows XP

http://www.techsupportforum.com/forums/f10/page-fault-in-non-paged-area-on-one-user-only-338622.html
Relevancy 85.57%

Ok people I have a very nice project in my head, but to archive this I need help

I am quite new to phpBB forums cause I used to code my own, but I lost my own template in php so I don't want to do it all over again. So here's the real question.

I have a website registration form. and I want to be able to connect to phpbb database and insert the stuff required for the user to be a registered user on the forums.

So I know some basic stuff what I have to add, but is there a complete tutorial of what I need to add to the database.

Thanks in advance for all those who help
ClayC
 

https://forums.techguy.org/threads/phpbb-adding-a-new-user-to-the-database-from-another-registration-page.847802/
Relevancy 85.57%

I have installed Vista and joined it to our Domain. However, I still get the Switch User option. I don' t want to be able Fast User Switching. Is there an easy way to set this up to the way XP acts in a Domain environment?
Thanks a million.
Ian
 

A:Vista Login Page Fast User Switching

you can dear brother it is so simple click on the Lock icon on the pearl button near to it and you can do fast user switching without any problem and without logging off dear ................ enjoy,......... if any problem i will send you the screenshots
 

https://forums.techguy.org/threads/vista-login-page-fast-user-switching.542623/
Relevancy 85.57%

Hi guys been having this problem since yesterday Upon booting the system all looks fine till it loads the error in log 0x000000d1 BSOD at everytime, user page user account log in screen whereit hangs makes a screeching noise speakers followed by the BSOD Then it collects data for crash dump and reboots At the safe mode options I've tried all three options but only the 'safe mode only' option doesn't cause the system to hang o as I log in to my account in safe mode I'm greeted with the 'windows have recovered from an unexpected shutdown' box with the following Problem signature Problem event name Bluescreen OS version Locale ID Additinal information about the problem BCCode d BCP BCP BSOD at user log in page everytime, error 0x000000d1 BCP BCP F CC OS Version Ser pack Preduct Files that describe the problem C windows minidump - - dmp C users home appdata local temp WER- - sysdata xml I can't locate this file I have no access to internet and sound as it is in safe mode so I can't download any external driver reader as recommended by several online help I don't really know how to use the windbg as I'm not really an expert at computers Hope you guys can help really appreciate it

A:BSOD at user log in page everytime, error 0x000000d1

According to Carrona.org, STOP 0x000000D1: DRIVER_IRQL_NOT_LESS_OR_EQUAL
Usual causes: Device driver

But not seeing the crash dumps, we cannot decide about the driver; so please post it following the Blue Screen of Death (BSOD) Posting Instructions. If you cannot boot normally at all, boot into Advanced Boot Options, safe mode with networking, and then do it.

BTW, do you use any virtual drive emulator, say Daemon Tools or MagicDise?

http://www.sevenforums.com/bsod-help-support/264326-bsod-user-log-page-everytime-error-0x000000d1.html
Relevancy 85.57%

*Note: I am not sitting at this computer, and can provide only limited information about it, as it is not in my state. I have some info, but not much.
We have a new network printer, an HP LaserJet P4515, which is on our network. We added it today, and installed it via adding a new TCP/IP port, the usual way that we install network printers. It works for three out of four users that we installed the printer with. The fourth user is not able to print the test page, it just says pending, then error- failed to print.
Please advise so these people can finish their daily work.
Thanks,
Nemesis General

Relevancy 84.71%

Quote:




Mozilla has pulled a "Chrome" by adding a search box to the new tab page in Firefox 31, which reached beta status yesterday and is slated to ship in final form on July 22.
Along with the nine thumbnails representing the user's most-frequently-visited websites, the new tab page in Firefox 31's beta sports a search field near the top of the window. Typing a search string in the box initiates a search on Google, unless the user has changed the default search engine. If the Firefox user has changed the search engine -- say, to Yahoo or Microsoft's Bing -- that choice is also used in the new tab page's search box.




Firefox risks user backlash by adding search box to new tab page - Computerworld

http://www.techsupportforum.com/forums/f131/firefox-risks-user-backlash-by-adding-search-box-to-new-tab-page-850914.html
Relevancy 83.85%

Hello,

There are three user accounts on my friends computer.

Question:

What if He wanted to stay logged in continuously for hours on end just to his profile without the log in screen reappearing after so many minutes (that shows everyones account like at bootup). I thought this could be achieved by disabling the --on resume, password protect-- feature.

Well, that didnt work.

I hoping to disable the time out feature, that unlogs accounts, and to just run the screen saver, so even if we're away from the computer for a few hours, we dont have to log back in.

Is this possible in XP Home?

Why is not important.... Im just wondering if its possible.

Thanks.
 

A:Solved: user accounts, how to avoid the default login account page?

https://forums.techguy.org/threads/solved-user-accounts-how-to-avoid-the-default-login-account-page.388852/
Relevancy 80.84%

Hi! I'm using a Neo netbook, running Windows Ultimate 32-bit. I found out that my user profile got corrupted after a forced shut down (the battery doesn't work and the power went out causing it to shut down). The Welcome screen goes on for minutes, then "Preparing Your Desktop" appears and when it finally starts, Windows says that I've logged on with a temporary profile and that files will be deleted when I log off. Of course I've searched about this on the web and tried the REGEDIT method wherein I renamed the .bak file or something. I also tried making a new user profile, but the problem is, the new user that I created also seemed to be temporary, like, when I save a file, it will disappear after a reboot. Does anyone know any other method to fix this? Thank you in advance!

A:Preparing Your Desktop User profile corrupted, TEMP User

This looks like the same or similar problem as here:
http://www.sevenforums.com/general-d...ed-hidden.html

http://www.sevenforums.com/general-discussion/332536-preparing-your-desktop-user-profile-corrupted-temp-user.html
Relevancy 80.84%

Here's my issue, I would like to RDP to a Windows 7 laptop. Even with Administrative privledges, it will tell me "Waiting for user to respond". I would like to either switch users via RDP, or force them to log off without prompting.

Server is SBS 2008. I already have "Set Rules for remote control of Terminal Services user sessions" to Full Control without user's permission.

Relevancy 78.69%

Windows XP Remote Desktop Behaviour is desireable. that is, when one account is logged in, if another account is tried to use to log in remotely from another computer, then the 2nd user cannot connect and it is indicated who is currently logged in.

Windows 7 Default behaviour is to allow the second user to try to disconnect the first user through a query message which has an idle timer.

Is there any way to change the behaviour back to windows xp, where 1) disconnection of the 1st user session is not possible, and 2) it is indicated which user is signed on?

Also, even one out of 1) , 2) is better than nothing...

thanks,

A:Remote Desktop disconnects rdp user when 2nd rdp user tries to log on

Hi Rnj,

You maybe able to do this within group policy.

See:
All Group Policy Settings for Remote Desktop Services in Windows Server 2008 R2

You can set an option to 'Deny logoff of an administrator logged in to the console session' or 'Set time limit for active but idle Remote Desktop Services sessions' etc.

I suggest that you make a note of what you do so that you can un-do it if needed
Dave

http://www.sevenforums.com/network-sharing/222661-remote-desktop-disconnects-rdp-user-when-2nd-rdp-user-tries-log.html
Relevancy 76.97%

Hello I need some assistance here A user unknowingly clicked on one of those warning screens which unfortunately installed some icons shortcuts pointing to porn sites I have tried to run some things like SS amp D and Tea Timer but it would not load processes are showing Also iexplorer exe seems to have been loaded too though it s not on the screen Let me know what I need to do so I can get these scans going Note that we do use Cisco Security Agent but that didn t seem to be effective Log of the HJT report is included Note that the domain name in the O s were change for security reasons Also in that log I only had Internet Explorer window open and though it says S amp D is running it was not visable All of this was done in safe mode loading windows normally results with explorer exe freezing Thanks in advance EDIT More information - I was able to get online and use an online scanner Right now it has found Win Bagle gen zip and Win Autorun LN worms Since this is for work I will not be able to do anything until I get back in tomorrow but please let me know what I need to do so I can at least log into windows normally without crashing out Thanks nbsp

A:user clicked "warning that system is infected" page

ended up getting a new drive into the machine... thanks though
 

https://forums.techguy.org/threads/user-clicked-warning-that-system-is-infected-page.902221/
Relevancy 76.97%

Trying to get one more year out of old XP machine. If I try to print in a non-administrator account the printer does its thing, but no ink comes out. I thought I was out of ink and got two refurbished cartridges and they work in administrator, but not user account. I'm using IE8 or Mozilla foxfire 30.
I recently had to reinstall Windows XP. printer is a HP deskjet 3740 and I recently reinstalled the software and driver. (in admin account)
This is a non-network, one use system
 

A:HP deskjet only prints ink in administrator, prints blank page in user account

Here is the support site for the HP Deskjet 3740 Color Inkjet Printer.

You should add and save this site in your browser's favorites/bookmarks list so you can readily refer to it when needed.

Here is the most current full-feature software driver package(10.1.0.0) for it for Windows XP.

The "Print" section in the "Solve a problem" section should be helpful to you.

-----------------------------------------------------------
 

https://forums.techguy.org/threads/hp-deskjet-only-prints-ink-in-administrator-prints-blank-page-in-user-account.1130061/
Relevancy 76.97%

I have a problem, I get to the Windows login that says to sign in but on the right there is not a user name it is just blank. Can anyone tell me what to do. This does this in Safe mode as well. I click ctrl. alt. del and a user login box comes up but still will not take password. This is a Windows XP Home SP2. Very strange. Thanks....

A:Can't login Windows XP Home Login page missing user names

This happened to me one time, I think it's a corrupt profile. I really don't remember how I solved it.

Do you use XP's System Restore? That would be my first idea.

Best suggestion that I can think of is to run chkdsk /r or the equivalent and see if that helps.

Louis

http://www.bleepingcomputer.com/forums/t/191067/cant-login-windows-xp-home-login-page-missing-user-names/
Relevancy 76.54%

Starting several weeks ago, after someone used it, my computer started going to the page I after the log off, switch user page when it was not being used. This is the page I would get to if I delibertly went to the start menue, clicked " log off" then clicked "switch user"

In order to get back to the main screen I now have to click onto the block with my user name. .

When the computer is not being used , the screen goes blank (as it did before) (because of power managment), but once I hit any key, what comes up is the little box I have to click to switch on as a user, instead of the main screen. .
How can I get the computer to work the way it did before.
 

A:computer goes to page after "switch user" by iteself when not in use

Right click the desktop, properties, screensaver tab, power, advanced tab, uncheck "prompt for password when computer resumes from standby" and click ok.
In the screensaver tab, uncheck "on resume..." and click ok.
 

https://forums.techguy.org/threads/computer-goes-to-page-after-switch-user-by-iteself-when-not-in-use.262435/
Relevancy 76.54%

Hi All,

I enabled the security policy to not display last logged on user, but now it says OTHER USER, and I don't like how it looks. I would like to just hide that text completely, while keeping that policy enabled. Has anyone found a way to do this? Thank you!

http://www.tenforums.com/user-accounts-family-safety/52190-hide-other-user-text-login-page.html
Relevancy 76.11%

I run windows 7 premium 64 and all of the sudden I stated to get this popup after windows loads that says
"C:\User\Lori-Bee\AppData\Local\Temp\032150Log.iniis lost"
How can I fix this?...I tried check disk running CCleaner ....No difference

A:C:\User\User -User\AppData\Local\Temp\032150Log.iniis lost

Hi there ... Read the Link below and follow the Instructions ..
ASUSTeK Computer Inc.-Forum- Error 182418Log.iniis lost

http://www.sevenforums.com/general-discussion/325334-c-user-user-user-appdata-local-temp-032150log-iniis-lost.html
Relevancy 75.68%

So here s the problem I share my computer with my mother who is going back to school She wants to be able to log on to the www tri-c edu website but when she clicks on the quot my tri-c space quot link at the top or types in my tri-c edu it says quot error on page quot and displays a blank page Here s the strange thing This only happens when trying to access the user on but one not for page" account, another "Error page with her user account When I log in with my user account and click on the link or type in my tri-c edu everything works fine This is all very mysterious It all started happening after I removed a malware infection The details of everything I did are in this thread on spywareinfo com I have tried deleting her user account and re-creating it but it didn t help Can someone please help me I hope this is in the right forum It deals with internet explorer but also XP user accounts so I m not sure nbsp

A:"Error on page" for one user account, but not another

Make sure that under your mother's login, Internet explorer has Java, JavaScript, and cookies all turned "on".

Here's some instructions on the tri-c.edu website:
https://lum-app.tri-c.edu/cp/misc/java_cook.html

If this fails, then I would unistall and reinstall Java.
 

https://forums.techguy.org/threads/error-on-page-for-one-user-account-but-not-another.750991/
Relevancy 75.68%

For some reason all of a sudden my machine is showing two users: myself and "Other user". I do not need to show "Other user" as I am the only person who uses the machine, and until this morning I was the only user shown.

How do I hide the "Other user" from the login page?

Trivial I know - but annoying...


Regards.

A:Removing "Other user" from login page.

I think it is more important to be sure that it is not a major problem.
Run your antivirus and download and run malwarebytes. Update and run full scan.
If it show nothing, we can either hide the profile or try to delete it.
User Account - Hide - Vista Forums
Works on 7, too.

http://www.sevenforums.com/general-discussion/120684-removing-other-user-login-page.html
Relevancy 75.68%

So here's the problem I page" another for user account, but not on one "Error share my computer with my mother who is going back to school She wants to be able to log on to the www tri-c edu website but when "Error on page" for one user account, but not another she clicks on the quot my tri-c space quot link at the top or types in my tri-c edu it says quot error on page quot and displays a blank page Here's the strange thing This only happens when trying to access the page with her user account When I log in with my user account and click on the link or type in my tri-c edu everything works fine This is all very mysterious It all started happening after I removed a malware infection The details of everything I did are in this thread on spywareinfo com I have tried deleting her user account and re-creating it but it didn't help Can someone please help me I hope this is in the right forum It deals with internet explorer but also XP user accounts so I'm not sure

http://www.techsupportforum.com/forums/f10/error-on-page-for-one-user-account-but-not-another-293371.html
Relevancy 75.68%

We are using Windows XP Home edition and 10+ user account is created and ?\Documents and Settings\All Users\Desktop? is shared so that any network computer can access or send data to desktop. Here problem is when login user save any file in desktop then it is saved in ?\Documents and Settings\<LoginName>\Desktop? which is not a shared Folder and i donot want to share it.
We are saving files ?\Documents and Settings\All Users\Desktop? with shortcut on desktop. But if new user login he must be informed otherwise he/she may paste in this desktop.
So is it possible to set All User Desktop has default Desktop to all the user account. So that if a user save any file is desktop then it saves in ?\Documents and Settings\All Users\Desktop? by default.

A:How to set All user desktop to all user account

Not really per se.
You can setup Microsoft office applications to default to saving new documents to a specific folder. In Word you can click on Tools > Options > File Locations.

I suppose you could redirect the users entire My Documents target to that folder location but that just seems too dangerous to me. But then it would dump all their files into there.

http://www.techsupportforum.com/forums/f10/how-to-set-all-user-desktop-to-all-user-account-412477.html
Relevancy 75.25%

Good evening from Graz,

i have quite a strange problem on my personal pc since the last few days. I cannot login to my useraccount(which has a transparent picture at the logon screen since a few days).
I have just one workarround: if i login with my adminaccount and logoff, the userpicture of my privateaccount appears again and the login is possible.

What could this problem be related to?

greetings
Nico Müller
 

A:Solved: Windows 7 User Account Problem(Transparent User Picture)

Good morning,

solved it. Disabled the admin account, and removed the pw of my useraccount.
Kind a strange problem indeed, but seems to be solved.

Thanks anyway,
Nico
 

https://forums.techguy.org/threads/solved-windows-7-user-account-problem-transparent-user-picture.946560/
Relevancy 75.25%

Hi! I did an new install of windows 7 (home first then upgraded to pro)
I want to hide a user by doing this on the registry:
HKEY_LOCAL_MACHINE \SOFTWARE \Microsoft \Windows NT \CurrentVersion \Winlogon \SpecialAccounts\ UserList ..then add dword32 by my username value to 0
I did this on my old laptop and it worked perfectly.

Now I've done the same thing on my new laptop. It works but stangely, the folder still appears in c\users.

The user is not visible in the panel control\users or at the start of the PC

I'm sure i've done the right thing, what is causing this? Could it be a bad install of windows? Please let me know if you have a idea!

Thank you very much for your help!

A:Hide user by registry stange problem: User still appears in C folder

If you log into that user it is going to have a user directory, regardless if you have the user hidden or not.

http://www.sevenforums.com/general-discussion/339572-hide-user-registry-stange-problem-user-still-appears-c-folder.html
Relevancy 74.82%

My grandmother was recently hacked and she changed all her passwords herself (yay!). However she did not write down her new local user account password for her laptop.

I tried downloading OPHCrack, I burned it as an ISO file and put it on a DVD-R(only thing I had on hand) and i changed the boot order on her BIOS menu to had the DVD drive as the first priority. It does not run....I hear the disk drive moving, or spinning but the program does not run. Are there any other options or do I have to do a complete system restore to bypass this? Also if that is what I have to do how do I do that without being in her control panel?

A:Old Problem New User- Forgot Local User Account Password

Hello there "hater",are you sure you downloaded the right OPHcrack version?It should be the one that is intended to be used on,not the one being used to download and be burned on.Try imgburn,never failed me to create bootable CDs or DVDs.

http://www.eightforums.com/user-accounts-family-safety/40661-old-problem-new-user-forgot-local-user-account-password.html
Relevancy 74.39%

I'm using Windows on a Dell machine When I installed a few months back I didn't set up a system password I don't think because I'm the only person on this machine and I didn't want to log-in each time when starting up Normally when I start or restart the computer I go straight into Windows and into my account While playing chess today my monitor page log-in "other get user" past on Can't froze I turned off the monitor and restarted the machine and the monitor seemed fine during start-up But then I got a system log-in screen and an option to log in Can't get past "other user" on log-in page as quot other user quot and that's the only log-in option was available I'm not sure why all of a sudden I have to log in So when I hit quot other user quot and then try to log in with what I think is my username and a likely password the system says no go Why am I getting to a log-in screen now all of a sudden And how do I get in to the system if Can't get past "other user" on log-in page it's saying my username and password are wrong Update OK after restarting several times all of a sudden I see the welcome screen and then my desktop -- I'm in like normal But my desktop picture is now back to a default Windows one and the task bar which used to be a dark blue is now a light gray My theme had gone to quot basic quot Any guesses as to what all happened to my system

A:Can't get past "other user" on log-in page

Hello Bilco, and welcome to Seven Forums.

Since you are now logged in, see if you may be able to do the tutorial to hopefully fix this "Other User" log on screen issue. Logon Screen - Fix Showing Only "Other User" and Last Logged On User
If not, then you might see if doing a system restore at boot using a restore point (if available) dated before this happened may help.

Hope this helps,
Shawn

http://www.sevenforums.com/general-discussion/296896-cant-get-past-other-user-log-page.html
Relevancy 74.39%

I am using Vista Home Premium Registry - User on Leaks User Problem Accounts -bit and I am having problem logging in using my user account An error flagged quot The User Profile Service service failed the logon User Account Profile cannot be loaded quot The Event Viewer window has these details Windows detected your registry file is still in use by User Registry Leaks - Problem on User Accounts other applications or services The file will be unloaded now The applications or services that hold your User Registry Leaks - Problem on User Accounts registry file may not function properly afterwards DETAIL - user registry handles leaked from Registry User S- - - - - - - Classes Process Device HarddiskVolume Windows System svchost exe has opened key REGISTRY USER S- - - - - - - CLASSES I was able to logged in through Safe Mode but still an error flagged in status bar that the profile was not properly loaded Although I was able to copy all data from that user account to a new account can I still troubleshoot the problem and be able to log in using the old user account I have all my shortcuts and archives there and quot every customized thing quot Any help would be greatly appreciated Thanks

A:User Registry Leaks - Problem on User Accounts

Hi aice and welcome to Vista Forums

Have you checked the information in the following Tutorial?

The User Profile Service failed the logon. User profile cannot be loaded.

http://www.vistax64.com/general-discussion/223345-user-registry-leaks-problem-user-accounts.html
Relevancy 74.39%

CANT FIND THE DEL BUTTON,,, 
 
NOT RIGHT PLACE FOR MY WRIGTING,,,:-)

A:1 account, 2 user names, but only 1 user = Big Registry Problem

What is exactly the meaning of this topic? Is it a queestion or a discussion?

http://www.bleepingcomputer.com/forums/t/563705/1-account-2-user-names-but-only-1-user-big-registry-problem/
Relevancy 74.39%

I have 2 seperate users on my computer (Myself and my wife) and I noticed that when I install a game, it puts a shortcut on both Desktops.

The problem comes in when I delete the game shortcut from one desktop (My wifes) it deletes it from both.

My wife does not play games and would rather not have the shortcuts on her Desktop.

How does one manage Desktop shortcuts so that they can just be in one profile and not the other?

A:User Profiles and the Desktop Problem

Hello Scorpiuscat,

Some programs will have the option during installation to allow all users or just your account access to the program.


If the shortcut is placed in the hidden C:\Users\Public\Desktop folder, then it will show up on all user account's desktop.

You can place the shortcut in the C:\Users\(user-name)\Desktop folder for any individual user account that you want the shortcut in though.

Hope this helps,
Shawn

http://www.vistax64.com/general-discussion/232347-user-profiles-desktop-problem.html
Relevancy 74.39%

when I log into my user account the desktop appears normal for a few seconds then goes into some sort of mode whereby the desktop goes black for most of screen but start button still there. I can access start button but anything I open appears at bottom with only the icon, it seems to be behind it. The cursor is silver and glittery as if its in some sort of drawing or graphic mode. This is not the administrator account but I've tried to find out how to chage display options using adminstrator account but i'm stumped!!

A:desktop problem with one user account

Hello mar18 and welcome to TSF,

Is this the only user account on the PC?

Do the other accounts load and work properly?

http://www.techsupportforum.com/forums/f217/desktop-problem-with-one-user-account-670680.html
Relevancy 73.53%

I've been trying to set up remote desktop on 2 Win XP Pro computers. I've enabled remote desktop connections on both computers and have put the admin account on both computers into the Remote Desktop Users group. When I establish a connection to the computer I try to log on with the admin account but Windows pops up an error message that says that user restrictions prevent me from logging on. What's going on??
 

A:User restriction problem with Remote Desktop

I'm just taking a guess here because I don't have XP Pro, I've got XP Home, but heres what may be the problem.

XP could possibly be giving you that error because the account you are trying to log on with (using the remote desktop connection) is already logged on, on the local machine.
What I suggest is to create another user, and put that user into the remote desktop connection group and then try to use that user to log in under the remote desktop connection.
 

https://forums.techguy.org/threads/user-restriction-problem-with-remote-desktop.93936/
Relevancy 73.1%

Help Please I've been searching this forum and on line all day I cannot find anything close to my problem or any instructions to help me fix it I have two user accounts on my computer Both have Administrator privileges however recently certain functions and capabilities have disappeared from these User Logons I think they have somehow become corrupt so I thought I would create a new user and Profile/ User Creation User Problem copy over the files minus the Ntuser dat Ntuser dat log and Ntuser ini HOWEVER when I open the Control Panel User Accounts and click Add or Remove User Account User Profile/ User Creation Problem - I get nothing No window opens I have even activated the built in Administrator Account through the elevated command prompt but was unable to rename as per the tutorial on here and it doesn't work either I think not being able to rename the Administrator account has something to do with me not having true administrator privileges When I tried to save the rename program into the Windows system folder I got a you must have administrative rights to do this pop up so I clicked to activate but it never placed the file in the system folder Other things discovered while working on this - I cannot see find from the start prompt local security policies - Manage Computer does not show Users amp Groups I can boot into safe mode and use the Toshiba Restore option which will bring it back to out of the box condition - but I believe I would have to reinstall all my programs - not something I want to do -- so this is a worst case Armageddon scenario Any idea on how to fix these profiles and or what could be wrong with Windows running Home Premium bit Sandy

A:User Profile/ User Creation Problem

Other things discovered while working on this:
- I cannot see/find (from the start prompt) "local security policies" 
- "Manage Computer" does not show "Users & Groups".
 
These are only available in the Pro version of Windows 7.
 
You should not need to rename the hidden Administrator group. When logging into the Hidden Administrator Account you activated, you cannot create a new user in Control Panel?

http://www.bleepingcomputer.com/forums/t/562590/user-profile-user-creation-problem/
Relevancy 71.81%

Problem with user accounts no taskbar no explorer exe it isn't running no desktop icons Hi I'm having trouble when I load my desktop with no accounts:no explorer.exe, Problem user taskbar, no icons side of the computer and the only way I can access programs is through Windows Task Manager All that will load is the desktop background picture I have looked up various solutions - it seems the explorer exe process is Problem with user accounts:no taskbar, no explorer.exe, no desktop icons missing or unable to be located when I try to run it I have ran Problem with user accounts:no taskbar, no explorer.exe, no desktop icons an AVG scan and two infection were found and supposedly healed These were C Programfiles MicrosoftCommon wuauclt exe Win Heur and C WINDOWS System ntos trojanhorsePakes c RZ Have not yet ran any other scans and really need futher advice on what to do next I have Spybot and Adaware but have not yet ran a scan since before the computer started playing up I've also had to manually open Zonealarm so that I have a functioning firewall I've only had this problem once before - I think it was yesterday and I panicked and just turned off the computer at the switch Restarted everything was fine and the toolbar amp desktop was there Today it was working fine until I turned it on about hours ago

A:Problem with user accounts:no taskbar, no explorer.exe, no desktop icons

Quote:





Originally Posted by elcacat


Problem with user accounts:no taskbar, no explorer.exe (it isn't running), no desktop icons

Hi I'm having trouble when I load my side of the computer and the only way I can access programs is through Windows Task Manager. All that will load is the desktop background picture. I have looked up various solutions - it seems the explorer.exe process is missing or unable to be located when I try to run it. I have ran an AVG scan and two infection were found and supposedly healed. These were C:\Programfiles\MicrosoftCommon\wuauclt.exe (Win32\Heur)and C:\WINDOWS\System32\ntos (trojanhorsePakes_c.RZ). Have not yet ran any other scans and really need futher advice on what to do next! I have Spybot and Adaware but have not yet ran a scan since before the computer started playing up. I've also had to manually open Zonealarm so that I have a functioning firewall :/

I've only had this problem once before - I think it was yesterday and I panicked and just turned off the computer at the switch. Restarted, everything was fine and the toolbar &desktop was there. Today it was working fine until I turned it on about 2 hours ago






I've seen something like this once but could not fix it, however try the following. At the blank desktop (just wallpaper) bring up task manager ctrl-alt-delete. You should see some tasks but explorer.exe is missing.

Click new task, enter explorer.exe and press enter. The rest of the desktop will load, icons, taskbar and menubar. You now have a chance to fix whats wrong.
If you can run a scan with either SysInternals autorun of HijackThis this will be your best chance, compare each running task with google, you may be able to pinpoint the cause(s).

You may however be able to create a new user in control panel with admin rights and copy your files across from the old account to the new account.
I'm not sure exactly where in the boot process explorer.exe is called from, but your machie has been compromised, and sometimes its easier to format and reinstall.

The machine I had a look at for a friend also had a folder on the root C: drive just called ! This folder contained hundreds of p0rn type avi's but worse still refused to be delted recreating itself on reboot. Check for any strange folder names called ! may also be worth you running msconfig and hecking the contents of win.ini system.ini, startup services and programs.
Good luck.

http://www.techsupportforum.com/forums/f10/problem-with-user-accounts-no-taskbar-no-explorer-exe-no-desktop-icons-273358.html
Relevancy 70.09%

As of today in our domain environment consisting of Windows and Windows Enterprise machines we are experiencing the quot User Profile service failed the sign-in - User profile cannot be loaded quot error message whenever a user tries to login This only affects users new to the particular machine If they have signed on before and already have Default service 8 User Profile loaded. be Profile Profile sign-in Win Environment Domain in Corrupt The failed User 7 the User Win cannot and - a cached account the computer logs them in with no issue This is occurring on both Win and Win machines We are an academic institution so this is becoming a huge problem in our labs Students generally use different computers so this is popping up very frequently I have a solution for the issue It appears that on the non-working machines that the quot Default quot user profile is corrupt I have discovered that if I find a machine Win or Win doesn't matter that is allowing first time users to logon I can copy the quot Default quot user profile and replace the corrupt one I must first permanently delete the corrupt profile before copying over the new one Corrupt Default User Profile in Domain Environment - The User Profile service failed the sign-in User Profile cannot be loaded. Win 8 and Win 7 I am doing this over the network by navigating the C users folder Even this way is becoming cumbersome though as we have over computer in labs I have googled and googled and I keep seeing the same answers offering various solutions none which are any more practical than my method I cannot find information on a cause or a reason of why this would just crop up out of nowhere I suspect maybe a Windows update but I cannot verify that yet If anyone can offer any advice share a possible patch it would be much appreciated Thanks nbsp

https://social.technet.microsoft.com/Forums/en-US/5a617fa3-ddbe-49a2-af23-e68fd6b015a3/corrupt-default-user-profile-in-domain-environment-the-user-profile-service-failed-the-signin?forum=w8itprogeneral
Relevancy 65.79%

Hi,

Request you to please help me to fix this error which i am facing since long time.

I am getting error as Blue dump screen IRQL not less than or equal and sometime Page fault in non paged area.

I have removed my Ram Cleaned and reinstalled and tried different RAM still facing same issue.

Hard Disk also changed and still facing issue but frequency of error is less.

Looked device manager and cannot see any exclamation mark under any driver.

Changed Sata Cable but no use.

How we come to know where is the issue. Please help me out to fix this. I have attached dump file in zip.

My system specifications are:
Operating system : Windows XP service pack 2
Ram 512 MB
Hard Disk 160 GM
Pentium ®D CPU 3.40 GHZ.

I really appreciate your help. Thanks in Advance!
 

A:Blue dump screen IRQL not less than or equal and page fault in non page area

Try testing your memory using Memtest86... Use Google to find it
 

http://www.techspot.com/community/topics/blue-dump-screen-irql-not-less-than-or-equal-and-page-fault-in-non-page-area.171290/
Relevancy 65.79%

Hello guys

I have experienced some errors, let me provide the details:

Acer Laptop,
OS: XP 2002, SP3, IE8, I have set a webpage as home page, but when ever I click to open new web page it come blanks showing a glob and saying:
" Internet Explorer cannot disply the webpage"
underline saying:

What you can try:
and displaying an icon saying: "Diagnose Connection Problems"

under this icon: showing an arrow with discription: More information...

it's really borhting.. and I tried even to change the home page website but still comong the same, will disply the website online when I type in the address bar and select from the favourites menu,

I will appreciate if any advises,
thanks
 

A:Solved: Internet Explorer opens a black page instead of the home page site

https://forums.techguy.org/threads/solved-internet-explorer-opens-a-black-page-instead-of-the-home-page-site.967179/
Relevancy 65.79%

Okay so when I play World of Warcraft for minutes- hours the game randomly shuts down I found out my problem was that my Video Card isnt up to date so I updated I updated and im still getting the same issue I looked at my EPU- Engine and when i click on VGA it says VGA [SOLVED] Area BSOD not Page Driver less or Page Non Equal IQRL Fault not detected Can someone please tell me what the possible problem can be and how I can fix this My graphics [SOLVED] BSOD Driver IQRL not less or Equal Page Fault Non Page Area card is a ATI Radeon HD mb I cant attach mini-dumps because for some odd reason it I apparently dont have permission so if anyone know how to bypass through this please let me know System specs Motherboard ASUS M A -M Processor AMD Phenom II X GHz RAM GBDDR VGA ATI RADEON HD mb Oh and by the way it sometimes goes blackscreen with these lines coming down while the game plays in the background and I have to manually turn off my computer Sometimes it gives me BSODs with PAGE FAULT NON PAGE AREA or IRQL NOT LESS OR EQUAL

A:[SOLVED] BSOD Driver IQRL not less or Equal Page Fault Non Page Area

Smells like video card puttering out.

Are you referring to a permission denial by attempting to attach the dumps directly? You'll need to zip them first before sending them over, as only certain file types are permitted. Plus there's a 5 MB limit (doubt that's the cause though).

http://www.techsupportforum.com/forums/f299/solved-bsod-driver-iqrl-not-less-or-equal-page-fault-non-page-area-565765.html
Relevancy 65.79%

I've searched the internet for answers, try many programs and suggestions, but nothing worked to clean the malware, and nothing on how to open the tools/extensions on chrome again, when I clic on it, it closes the window. I'm sending files of the latest scans.
 

https://malwaretips.com/threads/clic-on-broswe-page-opens-add-page-and-unable-to-open-extension-on-chrome.61766/
Relevancy 65.79%

I using a d630 with Windows 7 everything was fine until I installed AVG Antivirus Free Edition then my computer really screwed up I have three different error message when I do the diagnostics
They all start with 00F0 :
I have went to many sites and tried various options my computer will not download in any of the modes not safe mode. Normal mode not start in last known good configuration nothing every time it starts to boot it goes back to this blue screen this is the technical info below
STOP: 0x000F007EMAIL (0xFFFFFFFFC0000005 , 0xFFFFF8000C1ADOF3 ,0xFFFFF880027F08B8,
0xFFFFF880027F0110

http://www.bleepingcomputer.com/forums/t/589117/blue-screen-message-page-load-in-non-page-and-will-not-boot-in-any-mode/
Relevancy 65.79%

I was wondering,my site adviser button was up there with my other buttons before the update,now,although there is space with my other buttons on my tool bar,it takes up a whole slot,reducing my viewing space.
Can anyone tell me how to get it in line with the others please?
Thanking you

A:Page switching to advertising page?/Also McAfee site adviser tool bar

Right click on the IE7 toolbar (area between home page icon and tab) and scroll down to "customize command bar" then go to "add or remove commands". See if you see the siteadvisor icon in the "available toolbar buttons". If so just move it to the "current toolbar buttons" area. You may want to then "lock" your toolbar.In Internet Explorerright click somewhere on the toolbaruncheck lock toolbarleft click and drag the items anywhere you want them to be.right click anywhere on the toolbar and choose lock toolbar.

http://www.bleepingcomputer.com/forums/t/187928/page-switching-to-advertising-pagealso-mcafee-site-adviser-tool-bar/
Relevancy 65.79%

One of my computers loads the page but then reverts back to the previous page. I couldn't get far enough to even register on you forum before it would revert. I ran spybot and it found a lot of problems but it also said it fixed, yet I still have problem. Also affecting mouse. Left double click only works sporadically. Also noticed that sometimes my 3 key on the tenkey was acting like the enter button. What a mess!! Please let me know what I should do next!

A:internet page loads thenreverts to previous page; also mouse problems

Also tried to run the panda activescan but could not get it to scan. Popup would time out before activex could load.

http://www.techsupportforum.com/forums/f284/internet-page-loads-thenreverts-to-previous-page-also-mouse-problems-177225.html
Relevancy 65.79%

On navigating from one page to another page in windows store app all objects and previous page still in memory,
also the app memory keeps on increasing on switching tabs and switching pages even unregistering unused events and using GC.Collect. App crashes on continuous usage ,
Can anyone suggest an option to clean unwanted memory.

A:How to Destroy previous page while doing page Navigation in Windows Store Apps

Originally Posted by Windows Central Question On navigating from one page to another page in windows store app all objects and previous page still in memory,
also the app memory keeps on increasing on switching tabs and switching pages even unregistering unused events and using GC.Collect. App crashes on continuous usage ,
Can anyone suggest an option to clean unwanted memory. is this on PC? You can reset the store app in settings > system > apps > select store app > advanced options > reset
If you need additional help or have more questions or details to share, please join the site so you can reply in this thread. See this link for instructions on how to join Windows Central.

http://forums.windowscentral.com/ask-question/438228-how-destroy-previous-page-while-doing-page-navigation-windows-store-apps.html
Relevancy 65.36%

I have worked out how to set the print area using a macro, but what I want to know is can you make the excel not split the data between pages. So if you have a block of information is there a way to have a macro or VB code that moves the line breaks so that the print area must always keep that block of information on the same page.
Thanks David
 

A:print area and setting page break to show block of info on same page in Excel

Hi, I guess a macro is the best solution but it must be written, you'll have to calculate the number of rows and columns per block v.s. the page size to set the page break.
This includes margins, header rows and foorter rows.
You could record a macro and then set the blocks of data as you need them.
Stop the recording ans see how it's done, then edit it to suit your purposes and replace the fixed references to dynamic ranges
 

https://forums.techguy.org/threads/print-area-and-setting-page-break-to-show-block-of-info-on-same-page-in-excel.1109270/
Relevancy 65.36%

This question is about using quot Page PAGE of NUMPAGES quot I ve read many solutions for this online and in MS s help files None of them are working and it really has me perplexed because I consider myself an advanced user My document is a book The first page of my book is a cover page It shouldn t be counted in page numbering Beginning on the second page my book has a TOC and then chapters The TOC and each chapter are set up in their own sections I do this because I include the chapter s name - which is the section name - in the footer along with page numbers It also facilitates creating the TOC I want the TOC to be counted Page {NUMPAGES} Solved: 2? Make start from counting Word Page Numbering: 2007 as Page All of that works fine for the PAGE page number To accomplish it I Solved: Word 2007 Page Numbering: Make {NUMPAGES} start counting from Page 2? told Word to start counting page numbers from and I suppressed displaying the number on the Cover Then for subsequent pages I selected quot Continue from previous section quot My issue is that I Solved: Word 2007 Page Numbering: Make {NUMPAGES} start counting from Page 2? really want to show both the current page and the total number of pages Solved: Word 2007 Page Numbering: Make {NUMPAGES} start counting from Page 2? quot Page PAGE of NUMPAGES quot in the footer When I try that PAGE displays correctly but NUMPAGES shows one too many It is obviously counting the cover page Evidently what I did in above only affects the count for PAGE and not for NUMPAGES All over the web I find the simple solution of using a formula field for NUMPAGES as follows NUMPAGES Actually I think that would do the opposite of what I want I would probably have to subtract a page rater than add one but the formula doesn t work anyway I ve found all sorts of variants of that and have tried numerous ones I have also tried many things on my own Each time I try something Word either displays a Syntax Error or else nothing at all where the Number of Pages should appear I ve shared a document on SendSpace that shows screenshots along the way The document itself is a Word document Here s a link http bit ly gwbCh I should add that I wondered if there was something funky in that document so I started a brand new document pasted junk plain text to create several pages and tried it there I still get the same Syntax Error when using the formula quot NUMPAGES quot So either this doesn t really work in Word I am doing something wrong or there s something screwy about my Word settings or Normal dot that s affecting this What am I missing here This thing has kicked my butt and taken far too much time Can anyone verify that in their own Word the formula above in the footer produces the desired result and not a Syntax Error Thanks N nbsp

A:Solved: Word 2007 Page Numbering: Make {NUMPAGES} start counting from Page 2?

I was just messing with the same issue and found a solution:

{={NUMPAGES}-1}

This may look exactly like something you tried already but here is the difference:

Instead of typing in the curly braces ( { ) manually, you have to hit "Ctrl-F9" to insert a field, then do the same for the braces around "NUMPAGES". You wind up with a field inside a field. That way it interprets the "NUMPAGES" as your document property, returns a number like "42", then the next field takes the equation "= 42 - 1" and returns "41". If you don't use "CTRL-F9" to enter the "NUMPAGES" field, it sees the first curly brace and stops, seeing it as a syntax error.

Hope it works for you! It worked for me!
-cheers
 

https://forums.techguy.org/threads/solved-word-2007-page-numbering-make-numpages-start-counting-from-page-2.989006/
Relevancy 65.36%

Guys I been facing some issues with my relatively new CPU I have an Intel i cpu combined with GB DDR memory Mobo is DH BL - revision No GPU installed Power supply is via Corsair VX Problem i been facing BSOD saying BSOD(Page page interrupt hangs area/Clock not + recd) Non Facing fault that A clock interrupt wasnt recd Screenshot - http i tinypic com lbhc jpg BSOD Facing BSOD(Page fault Non page area/Clock interrupt not recd) + hangs saying Page fault in non paging area Couldnt grab a screenshot for this Display randomly goes off for a split second and reappears but the color of the panes go blue i havent chosen blue My setting is Facing BSOD(Page fault Non page area/Clock interrupt not recd) + hangs for clear pane Screenshot - http i tinypic Facing BSOD(Page fault Non page area/Clock interrupt not recd) + hangs com o vfs png This error solves itself after random number of hours mins Display vanishes for a split second and reappears and a small balloon at the bottom right corner prompts that the display driver had stopped working System plain hangs stops responding Randomly happens but more so while on youtube or after hrs of it idling i come back to the comp and try to scroll the content onscreen Sometime it revives from the stuck state as if nothing happened sometimes i have to give it a cold boot While reading forums with blue bands the blue bands kinda form blurry bars which stretch till the end of the screen I tried to grab a screenshot but the screenshots were clean The bands moved as i dragged the image about Also my comp's display went off one day and within a second came back with a blue-ish hue It restored itself but again has gone back to blue-ish I never have overclocked my processor What can be the reason for this Pls help me out here Other relevant information Windows x No other OS resides installed on system Full Retail Version OS was installed in July The cpu mobo were purchased in July I had Dynet RAM x GB each now using Corsair x GB Purchased in Aug i think The issue of hanging etc was faced with the Dynet RAM as well RAM info http i tinypic com hrolw png http i tinypic com neuxzk png

A:Facing BSOD(Page fault Non page area/Clock interrupt not recd) + hangs

33 of 44 crashes were related (as you surmised ) to a Bugcheck of 101. The rest were various hardware complaints. Please read below for what to try.

STOP 0x101: CLOCK_WATCHDOG_TIMEOUT troubleshtg
You should also update to SP-1 when you resolve this issue.

http://www.sevenforums.com/bsod-help-support/223527-facing-bsod-page-fault-non-page-area-clock-interrupt-not-recd-hangs.html
Relevancy 65.36%

I am using free avast for my av program. I have using avast for many years and have been happy with it. Just recently I just upgraded to 2014 and it takes a long time between pages to go from page to page (10- 40 sec) that is too long and I am getting older with not to much time to live, and I do not want to waste it waiting for a page change. If I disable avast and run without av the pages zip by rather rapidly. So my problem is with avast enabled..has anybody had the same problem? Should I switch to an other free av prog???
Kas

A:Avast 2014 takes a long time from page to page

First thing I would try is to disable the Avast Browser add-ons if you are using them.

If that doesn't help, some other things you can try:
Do a Repair Avast.
Set up exclusions for your browser(s) in Avast.
If you're using a 3rd party Firewall, check the settings.
Do an uninstall using the Avast clean utility and re-install Avast.
Post your issue/question on the Avast forum, maybe someone there has seen this and knows an answer.

http://www.sevenforums.com/system-security/311940-avast-2014-takes-long-time-page-page.html
Relevancy 65.36%

this is my 1st post so i hope im doing everything right. ive had this problem from the beginning, when i built this computer. it just happens more so when im playing online games. i get 3 different errors the most common one is the page fault non page error the other two are dxgmms1.sys and memory management something. i thought it might be bad ram so a ran memtest86+ and everything came back good. i also thought it might be a bad install so i ran a repair and it found NET framework 4.0 was bad, so i downloaded it again. i thought it was fixed but its still doing it, crashes. please help

A:BSOD mostly when playing mmos page fault non page error

Welcome,

You have 32 GB of RAM. Are all the ram speed/clocks at the same level?

How many passes did you take memtest for? Did you try inserting each stick in different slots and see how your computer performs?

http://www.sevenforums.com/bsod-help-support/257162-bsod-mostly-when-playing-mmos-page-fault-non-page-error.html
Relevancy 65.36%

Hi,
I troubleshooting this "an ActiveX control on this page might be unsafe to interact with other parts of the page." This is not an error by itself but... I troubleshooting why you cant open an .doc fil from a intranet with word. 1. You go to an Intranet
page with your IE8/IE9. 2. You click on an .doc file. 3. you got this massage "an ActiveX control on this page might be unsafe to interact with other parts of the page." 4. you have Yes and No option 5. You click yes. 6. a white small IE window open. 7 the
.doc file was expected to open./SaiTech

A:an ActiveX control on this page might be unsafe to interact with other parts of the page.

If you trust the site go to internet options, security section,
Custom level button,
Scroll all the way to the bottom and check on disable xss filtering, apply and okay,
Close and reopen a window.

https://social.technet.microsoft.com/Forums/en-US/84e399d7-19d9-432e-a6b8-cf40005293fa/an-activex-control-on-this-page-might-be-unsafe-to-interact-with-other-parts-of-the-page?forum=ieitprocurrentver
Relevancy 65.36%

hi guys basically when im browsing some sites they do not load properly on interet explorer or firefox. i have attached images of what i mean and also the services i am running on my pc as i have disabled some.
running xp sp2 home edition latest updates. Im on a local lan and using windows firewall. my flat mate does not suffer the same problems with same setup as me.
any services not on the jpg are not running, may have something to do with it maybe?

A:page page display error on internet explorer and firefox

It could be your firewall, and also in FireFox theres an option to block images from certain websites maybe you sometimes clicked on that by acciddent. You can go to settings and see if those sites are on the list.

http://www.techsupportforum.com/forums/f56/page-page-display-error-on-internet-explorer-and-firefox-19925.html
Relevancy 65.36%

I am facing same issue of being redirected to different web pages when I click links in google search results. I have uninstalled all brower except IE V8.0. Tried to remove them by Malaware scanning but nothing works for me. Your help highly appriciated.
 

A:Google search page links when clicked redirects me to different web page

https://forums.techguy.org/threads/google-search-page-links-when-clicked-redirects-me-to-different-web-page.912349/
Relevancy 65.36%

I often right click in IE (I'm actually using Avant, a kind of IE mask I guess) and select Create Shortcut. It puts a shortcut and my desktop to that page. This mysteriously stopped working. The icon appears on my desktop with the page title and all, but when I double click it, it just opens up my browser and loads about:blank. In the shortcut file's properties, it just says:

Type: Internet Shortcut
Description: (the title of the page)

and then gives me the file's size, location, etc., but it doesn't list the URL anywhere. It's just getting on my nerves having to copy a page's URL to a text file on my desktop if I want to remind myself of something.
 

A:Simple but annoying. Web page shortcuts just open a blank IE page.

Sounds like you have been hijacked by about:blank. Go to this website that will help you remove it.
http://www.pchell.com/support/aboutblank.shtml
 

https://forums.techguy.org/threads/simple-but-annoying-web-page-shortcuts-just-open-a-blank-ie-page.348646/
Relevancy 65.36%

hello,

i am really desperate. I have problems with redirections shaibaoj.com ... and some chinese recepise redirections. I have tried to clean stuff with at least 10 programs but unsucessfully. I also formated computer , but problem did survive !!!

its a little better when i use public wifi, but when i use private router/modem its almost impossible to surf over the internet...

Please help me
 

A:Browser redirections on chinese recipes page or blank page

Hello,

They call me TwinHeadedEagle around here, and I'll be working with you.

Before we start please read and note the following:

At the top of your post, please click on the "Watch thread" button and make sure to check Watch this thread...and receive email notifications. This will send an email to you as soon as I reply to your topic, allowing me to solve your problem faster.
Please do not install any new software during the cleaning process other than the tools I provide for you. This can hinder the cleaning process. Please do not perform System Restore or any other restore.
Instructions I give to you are very simple and made for complete beginner to follow. That's why you need to read through my instructions carefully and completely before executing them.
Please do not run any tools other than the ones I ask you to, when I ask you to. Some of these tools can be very dangerous if used improperly. Also, if you use a tool that I have not requested you use, it can cause false positives, thereby delaying the complete cleaning of your machine.

All tools we use here are completely clean and do not contain any malware. If your antivirus detects them as malicious, please disable your antivirus and then continue.
If during the process you run across anything that is not in my instructions, please stop and ask. If any tool is running too much time (few hours), please stop and inform me.
I visit forum several times at day, making sure to respond to everyone's topic as fast as possible. But bear in mind that I have private life like everyone and I cannot be here 24/7. So please be patient with me. Also, some infections require less, and some more time to be removed completely, so bear this in mind and be patient.
Please stay with me until the end of all steps and procedures and I declare your system clean. Just because there is a lack of symptoms does not indicate a clean machine. If you solved your problem yourself, set aside two minutes to let me know.

Please attach all report using button below. Doing this, you make it easier for me to analyze and fix your problem.

Do not ask for help for your business PC. Companies are making revenue via computers, so it is good thing to pay for the repair.
If I don't hear from you within 3 days from this initial or any subsequent post, then this thread will be closed.


Rules and policies

We won't support any piracy.
That being told, if any evidence of illegal OS, software, cracks/keygens or any other will be revealed, any further assistance will be suspended. If you are aware that there is this kind of stuff on your machine, remove it before proceeding!
The same applies to any use of P2P software: uTorrent, BitTorrent, Vuze, Kazaa, Ares... We don't provide any help for P2P, except for their removal. All P2P software has to be uninstalled or at least fully disabled before proceeding!

Failure to follow these guidelines will result with closing your topic and withdrawning any assistance.


Please download Farbar Recovery Scan Tool and save it to your desktop.

Note: You need to run the version compatibale with your system. If you are not sure which version applies to your system download both of them and try to run them.
Only one of them will run on your system, that will be the right version.
Double-click to run it. When the tool opens click Yes to disclaimer.
Press Scan button.
It will make a log (FRST.txt) in the same directory the tool is run. Please attach it to your reply.
The first time the tool is run, it makes also another log (Addition.txt). Please attach it to your reply.

 

https://malwaretips.com/threads/browser-redirections-on-chinese-recipes-page-or-blank-page.54827/
Relevancy 65.36%

Someone please help!

Everytime I open a yahoo page on internet explorer it is redirected to the Dell page which tells me I am probably infected with malware. I don't know what to do, hence why I am here.

I beseech you kind people who are far more computer literate than I please help!

A:Yahoo page on Internet explorer redirects to Dell page

Hello and welcome to Bleeping ComputerWe apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here.If you have since resolved the original problem you were having, we would appreciate you letting us know. If not please perform the following steps below so we can have a look at the current condition of your machine. If you have not done so, include a clear description of the problems you're having, along with any steps you may have performed so far.Upon completing the steps below another staff member will review and take the steps necessary with you to get your machine back in working order clean and free of malware.If you have already posted a DDS log, please do so again, as your situation may have changed.Use the 'Add Reply' and add the new log to this thread.Thanks and again sorry for the delay.We need to see some information about what is happening in your machine. Please perform the following scan:Download DDS by sUBs from one of the following links. Save it to your desktop.DDS.scrDDS.pifDouble click on the DDS icon, allow it to run.A small box will open, with an explaination about the tool. No input is needed, the scan is running.Notepad will open with the results.Follow the instructions that pop up for posting the results.Close the program window, and delete the program from your desktop.Please note: You may have to disable any script protection running if the scan fails to run. After downloading the tool, disconnect from the internet and disable all antivirus protection. Run the scan, enable your A/V and reconnect to the internet. Information on A/V control HERE

http://www.bleepingcomputer.com/forums/t/279807/yahoo-page-on-internet-explorer-redirects-to-dell-page/
Relevancy 65.36%

Can anyone help with this problem that I have in MS Word 2000.

I have created a 15 page document with a Title page and a Table of Contents(TOC).

I want to do the following:

1. create a footer with the following page format - page X of Y

2. Ensure that the title and TOC page do not display the footer numbering.

The help feature in Word says a section break should be inserted to prevent a page number from displaying. It is not clear to me where I should do this as the end of TOC page already has a section break and also the Help doesn't indicate how one can prevent page numbers from displaying on two pages.

Any suggestions would be greatly welcomed.

Regards
 

A:Preventing page numbering in title and table of contsnt page

Firstly, in the footer of the required section, you'll need a custom NUMPAGES field, but you'll have to tweak it to allow for however many pages aren't to be counted. I used "-1" because I had a first section containing one page.

See attached for the syntax (NB: you can't type the brackets, they must be inserted with CTRL+F9).
 

https://forums.techguy.org/threads/preventing-page-numbering-in-title-and-table-of-contsnt-page.457251/
Relevancy 65.36%

Computer has been going to Fault Non in Blue provideed Area...HJT Page Screen-Page blue screen and saying quot Page fault in non page area quot then begins dump of memory I dont know if it has been infected or what I have in the recent past had to remove the xp virus pro bug with Malware Blue Screen-Page Fault in Non Page Area...HJT provideed Bytes Seemed all was ok then a couple of days later this started happening Have attached the hjt log from my initial request of help I thank Blue Screen-Page Fault in Non Page Area...HJT provideed you for any help Hijack this log Logfile of Trend Micro HijackThis v Scan Blue Screen-Page Fault in Non Page Area...HJT provideed saved at PM on Platform Windows XP SP WinNT MSIE Internet Explorer v Boot mode Normal Running processes C WINDOWS System smss exe C WINDOWS system winlogon exe C WINDOWS system services exe C WINDOWS system savedump exe C WINDOWS system lsass exe C WINDOWS system svchost exe C WINDOWS System svchost exe C Program Files Common Files Symantec Shared ccSetMgr exe C Program Files Lavasoft Ad-Aware aawservice exe C WINDOWS system spoolsv exe C PROGRA AVG AVG avgwdsvc exe C WINDOWS System GEARSec exe C Program Files Microsoft SQL Server MSSQL HONDAEPC Binn sqlservr exe C WINDOWS system PRISMSVC EXE C WINDOWS Explorer EXE C WINDOWS system PRISMSVR EXE C PROGRA AVG AVG avgrsx exe C PROGRA AVG AVG avgemc exe C WINDOWS system hkcmd exe C WINDOWS system igfxpers exe C WINDOWS System DLA DLACTRLW EXE C Program Files Microsoft IntelliPoint ipoint exe C PROGRA AVG AVG avgtray exe C Program Files Adobe Reader Reader Reader sl exe C WINDOWS system ctfmon exe C Program Files Common Files InstallShield UpdateService issch exe C Program Files Spybot - Search amp Destroy TeaTimer exe C Program Files kinberlin kinberlink Kinberlink exe C Program Files Microsoft SQL Server MSSQL HONDAEPC Binn sqlagent EXE C WINDOWS system wuauclt exe C Program Files Trend Micro HijackThis HijackThis exe R - HKLM Software Microsoft Internet Explorer Main Default Page URL http go microsoft com fwlink LinkId R - HKLM Software Microsoft Internet Explorer Main Default Search URL http go microsoft com fwlink LinkId R - HKLM Software Microsoft Internet Explorer Main Search Page http go microsoft com fwlink LinkId R - HKLM Software Microsoft Internet Explorer Main Start Page http go microsoft com fwlink LinkId R - URLSearchHook Yahoo Toolbar - EF BD -C FB- D - F- D F - C Program Files Yahoo Companion Installs cpn yt dll O - BHO amp Yahoo Toolbar Helper - D -C F - efb- B - ECA - C Program Files Yahoo Companion Installs cpn yt dll O - BHO Adobe PDF Reader Link Helper - E F-C D - D -B D- B D BE B - C Program Files Common Files Adobe Acrobat ActiveX AcroIEHelper dll O - BHO WormRadar com IESiteBlocker NavFilter - CA F - F E- B -A E- E E C C - C Program Files AVG AVG avgssie dll O - BHO Spybot-S amp D IE Protection - - F - D - - D F - C PROGRA SPYBOT SDHelper dll O - BHO DriveLetterAccess - CA D E- - CF- E - - C WINDOWS System DLA DLASHX W DLL O - Toolbar no name - BF - F - - - FE E AA - no file O - Toolbar Yahoo Toolbar - EF BD -C FB- D - F- D F - C Program Files Yahoo Companion Installs cpn yt dll O - HKLM Run igfxtray C WINDOWS system igfxtray exe O - HKLM Run igfxhkcmd C WINDOWS system hkcmd exe O - HKLM Run igfxpers C WINDOWS system igfxpers exe O - HKLM Run DLA C WINDOWS System DLA DLACTRLW EXE O - HKLM Run IntelliPoint quot C Program Files Microsoft IntelliPoint ipoint exe quot O - HKLM Run AVG TRAY C PROGRA AVG AVG avgtray exe O - HKLM Run LXCGCATS rundll C WINDOWS System spool DRIVERS W X LXCGtime dll email protected O - HKLM Run Adobe Reader Speed Launcher quot C Program Files Adobe Reader Reader Reader sl exe quot O - HKLM Run ISUSPM Startup quot C Program Files Common Files InstallShield UpdateService isuspm exe quot -startup O - HKCU Run ctfmon exe C WINDOWS system ctfmon exe O - HKCU Run ISUSScheduler quot C Program Files Common Files InstallShield UpdateService issch exe quot -start O - HKCU Run SpybotSD... Read more

Relevancy 65.36%

Hi,

I have Excel 2000. When I try to print a spreadsheet with four columns, the preview shows the first two columns on page one the next two columns on page two, the first two on page three, the next two on page four, etc. It alternates printing only two columns on each page. I tried both portrait & landscape. The same thing happens. I changed page order from "down then over" to "over then down". It didn't help. How do I get all 4 columns to print on each page? Thanks.
 

A:Trouble Printing From Excel--Prints 2 Columns On First Page, Others On Next Page

Without seeing the spreadsheet, I can only offer a few suggestions.

Check print set up and check to see if it is set to print 2 pages wide. Change that to 1 page wide, however many "tall".

How wide are your columns? In print preview, turn on the margins view and resize the columns there.

Change your paper size to legal and print in landscape format if the columns need to be very wide.

Of course, then again, I could be completely off the mark here...
 

https://forums.techguy.org/threads/trouble-printing-from-excel-prints-2-columns-on-first-page-others-on-next-page.687989/
Relevancy 65.36%

Here are my system specs:
AMD 2200+
WinXP Pro SP2
760MB Ram
nVIDIA GForce 4 video

My computer will randomly shut down with either the page fault in non page area or driver not less of equal errors.

I have uninstalled and reinstalled drivers for the video and usb.

I don't know what else to do.

Will

A:BSOD Page Fault in Non Page Area/ Driver not less or equal

Hi flannelman,

Please give us the exact error message.

Thanks,

Rigel

http://www.bleepingcomputer.com/forums/t/28411/bsod-page-fault-in-non-page-area-driver-not-less-or-equal/
Relevancy 65.36%

See the attachment. Read the NY TIMES newspaper!

{redoak}
 

A:First page of front page NY TIMES artcle- monster hacking!

Really good hacker.....!!
 

https://forums.techguy.org/threads/first-page-of-front-page-ny-times-artcle-monster-hacking.1017225/
Relevancy 65.36%

I have areport that has the grouped on field appear above the column headings in the page header section of the report. this is to make the report fit on the A4 width, and works well. I force a page break on that grouped field footer.
The page break happens, but the grouped field is the previous one on the new page and only on the 2nd page for the new group does this grouped field value change.
How do I get the page break to force the grouped value to change?
 

A:Solved: Page header changes 1 page too 'late' - Access 2007

Okay sorted. Put the name back under the group header section and it changes when it should. Only makes the report 1 line longer per page.
 

https://forums.techguy.org/threads/solved-page-header-changes-1-page-too-late-access-2007.1066178/
Relevancy 65.36%

Hey guys,

I have a client at my workplace who has some problems in Internet Explorer 7 on a Windows XP desktop system.

You see, every time my client wanted to print out something, he/she usually goes into print preview. From there, there is a blank page on the first page, but there is some text on the second (and subsequent) pages. He/she is trying to print from a pop-up window with the menu bars and buttons in place.

I have to experiment and play around with the zoom buttons and even change it from portrait and landscape. My client is trying to print some reports and statistics for the VOIP lines on the administration page. How do I fix the particular issue?

My best guess is to upgrade the entire IE web browser to 8 (or maybe 9). Any other suggestions?

A:IE7 - print preview shows blank on first page, but some text on 2nd page

Hello simon726,

I would recommend upgrading to IE8. IE9 is not compatible with XP.

Also is the computer running the latest service pack?

http://www.techsupportforum.com/forums/f56/ie7-print-preview-shows-blank-on-first-page-but-some-text-on-2nd-page-571184.html
Relevancy 65.36%

TwinHeadedEagle said uarr Hello They call me TwinHeadedEagle around here and I ll be working with you Before we start please read and note the following At the top of your post please click on the quot Watch thread redirections recipes page blank Browser chinese on page or quot button and make sure to check Watch this thread and receive email notifications This will send an email to you as soon as I reply to your topic allowing me to solve your problem Browser redirections on chinese recipes page or blank page faster Please do not install any new software during the cleaning process other than the tools I provide for you This can hinder the cleaning process Please do not perform System Restore or any other restore Instructions I give to you are very simple and made for complete beginner to follow That s why you need to read through my instructions carefully and completely before executing them Please do not run any tools other than the ones I ask you to when I ask you to Some of these tools can be very dangerous if used improperly Also if you use a tool that I have not requested you use it can cause false positives thereby delaying the complete cleaning of your machine All tools we use here are completely clean and do not contain any malware If your antivirus detects them as malicious please disable your antivirus and then continue If during the process you run across anything that is not in my instructions please stop and ask If any tool is running too much time few hours please stop and inform me I visit forum several times at day making sure to respond to everyone s topic as fast as possible But bear in mind that I have private life like everyone and I cannot be here So please be patient with me Also some infections require less and some more time to be removed completely so bear this in mind and be patient Please stay with me until the end of all steps and procedures and I declare your system clean Just because there is a lack of symptoms does not indicate a clean machine If you solved your problem yourself set aside two minutes to let me know Please attach all report using button below Doing this you make it easier for me to analyze and fix your problem Do not ask for help for your business PC Companies are making revenue via computers so it is good thing to pay for the repair If I don t hear from you within days from this initial or any subsequent post then this thread will be closed Rules and policies We won t support any piracy That being told if any evidence of illegal OS software cracks keygens or any other will be revealed any further assistance will be suspended If you are aware that there is this kind of stuff on your machine remove it before proceeding The same applies to any use of P P software uTorrent BitTorrent Vuze Kazaa Ares We don t provide any help for P P except for their removal All P P software has to be uninstalled or at least fully disabled before proceeding Failure to follow these guidelines will result with closing your topic and withdrawning any assistance Please download Farbar Recovery Scan Tool and save it to your desktop Note You need to run the version compatibale with your system If you are not sure which version applies to your system download both of them and try to run them Only one of them will run on your system that will be the right version Double-click to run it When the tool opens click Yes to disclaimer Press Scan button It will make a log FRST txt in the same directory the tool is run Please attach it to your reply The first time the tool is run it makes also another log Addition txt Please attach it to your reply Click to expand I have the same issue could you please help me attached are the files from Farbar thanks nbsp

https://malwaretips.com/threads/browser-redirections-on-chinese-recipes-page-or-blank-page.54835/
Relevancy 65.36%

I am knee deep in writting up my final dissertation and need some help I need to number my pages but not from the first page I looked online and it said I should have an option to number pages from the page I was on but that was not the case I then read a and word numbering contents page page help making 2007 Need that you can insert an header and the page will be numbered from there again I could not get this to work I know in word you can generate a contents page that will show the page number of all my subsections and headings but I have no clue how to do this and until I get the page numbers working I cannot do it anyway If anyone can help me please reply I don t want to do my usualy trick of having two documents one the body Need help making a contents page and page numbering word 2007 of the work and the other all the pages that are not numbered because it will take for ever at this point nbsp

Relevancy 65.36%

On my W500 keyboard there are two keys on either side of the up arrow in the lower right corner. Pressing them allows you to navigate forward and back in your browser or in explorer. However, these have to be the worst placed keys possible. Whenever I am typing a message on a website and I want to move around in my text to make some edits, I go to use my arrow keys but occasionally I will hit the back key, thus going back to my previous page and losing all that I was typing. It is extremely frustrating. Is there a way to disable these key? I have no need for them, they only cause me headaches. Cheers,Jordan











Solved!
Go to Solution.

A:W500 - Disable page-back, page-forward keys

Yes,Start > Thinkvantage > Keyboard Customizer Utility > Key Sensitivity tab > uncheck Enable Browser Keys box utility found at (on mine) "C:\Program Files\ThinkPad\Utilities\TpKmapAp.exe" RickW500 4058-CTO WinXP   




RickW500 4058-CTO WinXP

https://forums.lenovo.com/t5/ThinkPad-P-and-W-Series-Mobile/W500-Disable-page-back-page-forward-keys/td-p/202882
Relevancy 65.36%

Sir,in ms-word document, i dont wont to give the page number to the whole document but when i am giving a page number to a selected page automatically it is giving page numbers to the whole document. So, is there any way to give a page number to the selected page.message edited by GulamMurtuza

A:How to give page numbers to selected page in word document.

Create separate sections.Make the page(s) where you want a number a section on its own. It will still be in sequence in the finished document.You insert a section break at the end of the page preceding the page where you want the page numbering to start. When you want to stop page numbering, create another section break at the end of the last numbered page in that section..Remember to enable/insert or not page numbering as appropriate for each section.

http://www.computing.net/answers/office/how-to-give-page-numbers-to-selected-page-in-word-document/20589.html
Relevancy 65.36%

Hello All,

I manage the maintenance on a corporate jet. I have a Dell Inspiron 6400 laptop running Vista. We use Microsoft Word 2007 for our maintenance log book, oldest maintenance entries to newest. I want WORD to open my logbook document on the last page of the document when I fire it up, not the first. Any ideas? My email address is [email protected].

Thanks, Greg Stultz
 

A:How can I get Word 2007 to open on the last page of a multi-page document?

The only way I know how to do this is using a macro. Open the document and press ALT + F11 to open the VBA editor. In the project explorer window on the left you will need to right click the object labeled "ThisDocument" and choose "View Code"

Paste the code below into the blank code window and save the document. You will need to adjust the macro security level to medium or low from the main Word window by clicking TOOLS --> MACRO --> SECURITY
Code:
Private Sub Document_Open()

Selection.EndKey Unit:=wdStory

End Sub
You can also accomplish the same action without using a macro by opening the document and clicking CTRL + END to take you to the last page.

Regards,
Rollin
 

https://forums.techguy.org/threads/how-can-i-get-word-2007-to-open-on-the-last-page-of-a-multi-page-document.601542/
Relevancy 65.36%

I bogus about:blank by Solved: page search page replaced am trying to help out a friend with their computer that was infested with a few trojan horses and a virus or two I have fixed most of it but still have problems when trying to use intenet explorer Here Solved: about:blank page replaced by bogus search page is the HijackThis log file Logfile of HijackThis v Scan saved at PM on Platform Windows XP SP WinNT MSIE Internet Explorer v SP Running processes C WINDOWS System smss exe C WINDOWS system winlogon exe C WINDOWS system services exe C WINDOWS system lsass exe C WINDOWS system svchost exe C WINDOWS System svchost exe C WINDOWS system LEXBCES EXE C WINDOWS system spoolsv exe C WINDOWS system LEXPPS EXE C Program Files Common Files AOL ACS AOLAcsd exe C Program Files Common Files AOL TopSpeed aoltsmon exe C WINDOWS system cisvc exe C WINDOWS System CTsvcCDA exe C WINDOWS system drivers KodakCCS exe C Program Files Norton AntiVirus navapsvc exe C WINDOWS System nvsvc exe C WINDOWS System svchost exe C WINDOWS wanmpsvc exe C WINDOWS System MsPMSPSv exe C Program Files Common Files Symantec Shared Security Center SymWSC exe C WINDOWS system cidaemon exe C WINDOWS system cidaemon exe C WINDOWS Explorer EXE C WINDOWS ntzc exe C Program Files Common Files Microsoft Shared Works Shared WkUFind exe C Program Files Real RealPlayer RealPlay exe C PROGRA NORTON navapw exe C Program Files Roxio Easy CD Creator DirectCD DirectCD exe C Program Files Common Files AOL ACS AOLDial exe C PROGRA COMMON AOL AOLSPY AOLSP Scheduler exe C Program Files HP hpcoretech hpcmpmgr exe C PROGRA COMMON AOL EE AOLHOS EXE C PROGRA COMMON AOL EE AOLServiceHost exe C Program Files Microsoft AntiSpyware gcasServ exe C WINDOWS system apino exe C Program Files Microsoft AntiSpyware gcasDtServ exe C Program Files Digital Line Detect DLG exe C Program Files Kodak Kodak EasyShare software bin EasyShare exe C Program Files Kodak KODAK Software Updater Program Kodak Software Updater exe C Program Files Common Files Microsoft Shared Works Shared wkcalrem exe C Program Files HP Digital Imaging bin hpqgalry exe C WINDOWS System msiexec exe C Program Files Internet Explorer iexplore exe C Documents and Settings Jane Bryant My Documents hijackthis HijackThis exe R - HKCU Software Microsoft Internet Explorer Main Search Bar res C WINDOWS system wmzpp dll sp html R - HKCU Software Microsoft Internet Explorer Main Search Page res C WINDOWS system wmzpp dll sp html R - HKLM Software Microsoft Internet Explorer Main Default Page URL about blank R - HKLM Software Microsoft Internet Explorer Main Default Search URL res C WINDOWS system wmzpp dll sp html R - HKLM Software Microsoft Internet Explorer Main Search Bar res C WINDOWS system wmzpp dll sp html R - HKLM Software Microsoft Internet Explorer Main Search Page res C WINDOWS system wmzpp dll sp html R - HKCU Software Microsoft Internet Explorer Search SearchAssistant res C WINDOWS system wmzpp dll sp html R - HKLM Software Microsoft Internet Explorer Search SearchAssistant res C WINDOWS system wmzpp dll sp html R - HKCU Software Microsoft Internet Connection Wizard ShellNext http www dellnet com R - Default URLSearchHook is missing O - BHO NAV Helper - BDF E -B - AD-A -FADC B - C Program Files Norton AntiVirus NavShExt dll O - BHO Class - F EA - F- - -CC A CAF - C WINDOWS system mfcve dll O - Toolbar Norton AntiVirus - CDD BF- FFB- - AD - DF B D - C Program Files Norton AntiVirus NavShExt dll O - HKLM Run Microsoft Works Update Detection C Program Files Common Files Microsoft Shared Works Shared WkUFind exe O - HKLM Run NvCplDaemon RUNDLL EXE C WINDOWS System NvCpl dll NvStartup O - HKLM Run diagent quot C Program Files Creative SBLive Diagnostics diagent exe quot startup O - HKLM Run UpdReg C WINDOWS UpdReg EXE O - HKLM Run RealTray C Program Files Real RealPlayer RealPlay exe SYSTEMBOOTHIDEPLAYER O - HKLM Run NAV Agent C PROGRA NORTON navapw exe O - HKLM Run AdaptecDirectCD quot C Program Files Roxio Easy CD Creator Direc... Read more

Relevancy 65.36%

Using Mozilla Firefox. I have set Home Page as blank, so the initial screen is blank. When the + to open a new tab is clicked the page is always displayed as a FIREFOX START page displaying a GOOGLE Search in the middle of it. (happens on at least v-24.0 thru 26.0 beta)


How in the heck do I get rid of it... ?
I do not want to see GOOGLE stuck in my face even if I will not use it.. Damn!
Thanks

A:GOOGLE Search page always displayed on Firefox new page (+) openings

Hi idahjo,

Type about:config in the address bar, press enter, click I'll be careful, I promise!
copy & paste into the search box.
browser.newtab.url
Right click & select modify
Input the page you want
or about:blank for a blank page.

http://www.sevenforums.com/browsers-mail/314251-google-search-page-always-displayed-firefox-new-page-openings.html
Relevancy 65.36%

https gist github com TrueToonatio fe caf f e Hi I've ran a mem check through windows and it says my ram is fine I was page been Screen: table win7? page Blue corrupted has A thinking of re-flashing my motherboard The story A week and a half ago I had to go back to windows from windows I did a clean install with Blue Screen: A page table page has been corrupted win7? a boot drive everything seemed fine then this blue screen happened Updated it and everything the blue screen happened again So I reinstalled windows again from my CD this time and wanted to upgrade to windows and I got Safe OS error Tried it with a boot driver had the same error again Then it blue screened again So I reinstalled windows up Updated it completely and it messed up with the updates I reseatted Blue Screen: A page table page has been corrupted win7? my ram switched slots reseated my gpu etc I do not know why windows is being so unstable when everything was fine when I had windows I'm thinking its a driver issue but I do not Blue Screen: A page table page has been corrupted win7? know where to look Currently this version of windows SP I have only has a few updates IE has direct x stuff etc Win on SSD two secondary hard drives M -CT M SSD ATA Device ST DM - YN ATA Device WDC WD EZEX- BN A ATA Device Sapphire as gpu i k cpu biostar motherboard B MU B LGA Ram Patriot Gamer DDR PGD G ELK GB The computer can run hours at a time without blue screening TLDR installed windows around times still same problem

A:Blue Screen: A page table page has been corrupted win7?

Hello Toonation and welcome to 7forums!

Please run this as it will help us help you:

Blue Screen of Death (BSOD) Posting Instructions

The dump files are a good start but to reach the finish line we need more!

Cheers, Boris

http://www.sevenforums.com/bsod-help-support/393516-blue-screen-page-table-page-has-been-corrupted-win7.html
Relevancy 64.93%

Hello,
I currently have 5 user accounts on my windows vista 32-bit computer and I needed to create a new account. So, I logged onto the administrator account and created a new user account. Then, I logged off the administrator account and tried to log onto the new account. However, I received the following message
The user profile service failed the log on.
User profile can not be loaded.
After receiving the message I restarted the computer and attempted to log onto the new account but I received the same message.
Please help me.
Thank you in advance.

A:The user profile service Service failed the log on. User profile can not be loaded. Problem. Windows Vista 32-bit

Fix a corrupted user profile, Vista - http://windows.microsoft.com/en-US/windows-vista/fix-a-corrupted-user-profile

Louis

http://www.bleepingcomputer.com/forums/t/456439/the-user-profile-service-service-failed-the-log-on-user-profile-can-not-be-loaded-problem-windows-vista-32-bit/
Relevancy 64.93%

Earlier today I turned on my Toshiba laptop Satellite P -S and got some sort of error screen and then it brought me to a screen asking if I wanted to do a system repair or start windows normally I chose system repair but then it seemed to get stuck in that process It was taking forever and nothing was happening so I turned off the laptop I know big no no booted in safe mode and did a system restore to a restore point from about a week ago The quot starting Windows quot screen came and went no problem Everything seemed fine till I got to the User Selection screen the default blue one with the little hummingbird or whatever Then it just sat there on that screen I could see the hummingbird and the little squiggly lines but there were no buttons to click my user I just let it sit there and after about minutes the user names popped up and Windows takes the screen 7 user forever load select user/switch to I was able to continue using the computer without any problems no other speed Windows 7 takes forever to load the select user/switch user screen issues whatsoever It now makes me wait every time always about Windows 7 takes forever to load the select user/switch user screen minutes before the user names pop up It does this when I restart the machine and when I try to switch users It is a Pentium Core i Ghz GB RAM Windows Home Premium bit Let me know if you need any other specs Any ideas Thanks Tim

A:Windows 7 takes forever to load the select user/switch user screen

Work through these steps for Troubleshooting Windows 7 Failure to Start.

The steps begin with disinfection from Safe Mode or boot disk, since if Win7 is badly infected it may not repair until cleaned up. Then everything possible to start it is sequenced.

I would also do the hardware tests provided before rescuiing the data to run Recovery or get the superior Clean Reinstall.

http://www.sevenforums.com/general-discussion/274499-windows-7-takes-forever-load-select-user-switch-user-screen.html
Relevancy 64.93%

So a new box recently built, when booted, defaults to the local administrator account.

This is a Windows 7 machine for a Linux guru that doesn't want to be bothered pressing more buttons than is necessary, if you get my drift.

So my question is, after pressing Ctrl+Alt+Del...how do I dictate to Windows that the preferred used is "HisDomainAccount" on our company domain, as opposed to the local admin account?

If I'm not being clear, please let me know and I will try to explain a little better.

A:Strange Defult Login User Prompt - Local Admin, Not Domain User

  
Quote: Originally Posted by Norwood


So a new box recently built, when booted, defaults to the local administrator account.

This is a Windows 7 machine for a Linux guru that doesn't want to be bothered pressing more buttons than is necessary, if you get my drift.

So my question is, after pressing Ctrl+Alt+Del...how do I dictate to Windows that the preferred used is "HisDomainAccount" on our company domain, as opposed to the local admin account?

If I'm not being clear, please let me know and I will try to explain a little better.


The above is a bit confusing. Is this computer joined to a work domain or is it not?

If this is a domain computer, the user will have to use the classic log on screen (Ctrl+Alt+Delete), not the Welcome Screen. If he wants to switch to logging in to the Local computer account and not the domain, he'll have to "Switch User" then log in with the format of Computername\User Name

http://www.sevenforums.com/general-discussion/208916-strange-defult-login-user-prompt-local-admin-not-domain-user.html
Relevancy 64.93%

(reposted from Customization)

Having just learned from an OLD post here that renaming a user account apparently doesn't change the order in which the corresponding logon icons appear at startup -- due to the order being apparently determined by when each folder was originally created, which was when this computer was first opened back in 2011 -- I want to be able, after creating a new user account, to migrate data from the account whose name I changed. I'd been previously suggested to try User Profile Wizard from Forensit.com... would this be a good idea, or can you suggest something different?

HP/Compaq CQ2014, AMD E-300, Radeon HD graphics, Win7 Home Premium 64-bit custom SP1, 3MB RAM, 500GB disk

Bob

http://www.sevenforums.com/performance-maintenance/392449-create-new-user-migrate-old-users-data-change-logon-icon-order.html
Relevancy 64.93%

Hi Guys One of our staff to User Solved: Account - User Deleted Guest - File Type Changing PC has a problem the scenarios Specs Alias Names -Company Name Contoso -Staff PC under Domain Alpha -PC Name Contoso -PC -Local Users are administrators and john Solved: Changing User Account Type - User to Guest - File Deleted -User profiles gt operations contoso domain gt john local gt administrator local -MS Outlook connected to email protected Thursday IT remove uninstall chat messengers blocked linkedin facebook twitter youtube change User Account Type Local Staff John Doe from User to Guest I change the type from User Accounts gt Properties gt Group Membership gt Others gt Guest shutdown the system Friday turn on the PC and staff asks for the correct username provides the username Contoso -PC john staff login to his local account using his password Saturday staff called and his desktop files are gone and document files are gone IT check the Users folder there are particular folders john and john contoso -pc both folders empty outlook not connected account is totally FRESh IT check on webmail under Domain Alpha not working the usual password webmail contoso com owa after an hour the usual password works IT tried to connect MS outlook using email protected not working saying quot outlook pst is not offline file quot PROBLEM files are gone Totally FRESh account I don t know what happen guys please help the FIles are gone Hoping your best solution THanks nbsp

A:Solved: Changing User Account Type - User to Guest - File Deleted

https://forums.techguy.org/threads/solved-changing-user-account-type-user-to-guest-file-deleted.1102921/
Relevancy 64.93%

On build I noticed a new Desktop Icon 'desktop' - solid yellow icon No need for that on the desktop so I put it in the Recycle Bin and to my amazement a popup appeared - quot This folder is too big to recycle do you want to permanently delete it quot after it compiled the size IF were to go ahead and do this - the Desktop clears out of folders a blank Desktop On build I noticed a new Desktop Icon 'my user name' I had no reason to go directly to that folder in C Users so I put it in the Recycle Bin and to my amazement it started to compile the size after that the popup would have appeared - quot This folder is too big to recycle do you Icon - Issue 10586 leads User User DELETION Folder deleted to want to permanently delete it quot IF were to 10586 Issue - User Icon deleted leads to User Folder DELETION go ahead and do this - the ENTIRE CURRENT USER FOLDER would be GONE I'm now running rs release - - which quot fixed it quot by requiring Administrator approval to 10586 Issue - User Icon deleted leads to User Folder DELETION continue Why is any Desktop Icon once deleted deleting any other file but itself System Restore wouldn't do any good for that GB of videos gone

A:10586 Issue - User Icon deleted leads to User Folder DELETION

Have not seen that on mine. Are you sure that no third party utility placed that icon, along with maybe third party Internet Security software.

http://www.tenforums.com/general-discussion/37679-10586-issue-user-icon-deleted-leads-user-folder-deletion.html
Relevancy 64.93%

For security reasons Microsoft does not allow parents computer administrators to check on maintain adjust or otherwise enter their kids limited users XP profiles without either resetting their passwords or waiting for them to come home and being confrontational about it Ideally I would like to be able to log on to a limited user account from my administrator account without tampering with anyone s passwords-resetting them or Bypass or or Screensaver W/out Password Adjust User Find XP User Reset Limited otherwise Actually I have little interest in the step kids personal life and stuff Alternately perhaps you may help me with my ultimate goal limiting screensaver activity My Find or Bypass XP Limited User Password W/out Reset or Adjust User Screensaver arrogant and belligerant teenage stepson likes to customize the family room to his tastes rather that leave it to the generic unbiased interest of the family in general Latest he has designed his quot my pictures quot screensaver somehow to override cmos settings to illustrate various pictures of himself for unlimited time rather than allow cmos or windows to shut off the monitor after periods of inactivity Typically he would prefer to be confrontational about it fight and argue over the issue stressing out his depressed mom in the process I do not want to fight-I just want my monitor to go off after a while of non-use and not be kept on by XP Sorry about all the disfunctional family issues I had to mention for background It is hard dealing with Find or Bypass XP Limited User Password W/out Reset or Adjust User Screensaver an aggressive controlling kid Obviously most of the time the computer is left on his profile but I quot am not allowed quot to adjust the power settings when it is for some reason from his profile nbsp

A:Find or Bypass XP Limited User Password W/out Reset or Adjust User Screensaver

looks like you have no choice in resetting passwords, who's house is it anyway???
 

https://forums.techguy.org/threads/find-or-bypass-xp-limited-user-password-w-out-reset-or-adjust-user-screensaver.428368/
Relevancy 64.93%

Having just learned from an OLD post here that renaming a user account apparently doesn't change the order in which the corresponding logon icons appear at startup -- due to the order being apparently determined by when each folder was originally created, which was when this computer was first opened back in 2011 -- I want to be able, after creating a new user account, to migrate data from the account whose name I changed. I'd been previously suggested to try User Profile Wizard from Forensit.com... would this be a good idea, or can you suggest something different?

HP/Compaq CQ2014, AMD E-300, Radeon HD graphics, Win7 Home Premium 64-bit custom SP1, 3MB RAM, 500GB disk

Bob

http://www.sevenforums.com/customization/392313-create-new-user-migrate-old-users-data-change-logon-icon-order.html
Relevancy 64.5%

Hi all I had to repair Windows XP Home from original disk because of a system error Now choose Showing to Cannot user Names Startup at Welcome No User a logon : Windows when I start Windows on the welcome page it says quot To begin click your user name quot but the right part of the screen where the users normally are is completely blank There are no users to choose from I can run No User Names Showing at Windows Welcome Startup : Cannot choose a user to logon Safe Mode so I have tried the following In safe mode went to Control Panel gt Users gt and added a new user and checked the Administrator password was still the same yes This made no difference and blue logon screen still asked me to choose a user but had no users showing In safe mode Start gt Run quot Control Userpasswords quot and unchecked quot Users must use a password on this computer quot This has now created the error when I boot quot Unable to log you on because of an account restriction quot Then goes back to blue quot To begin click your user name quot but no users Tried repairing Win XP AGAIN but no difference Has anyone seen this problem before I would so appreciate any input Thanks MJ nbsp

https://forums.techguy.org/threads/no-user-names-showing-at-windows-welcome-startup-cannot-choose-a-user-to-logon.703502/
Relevancy 64.5%

When I tried to log on to my computer, I'm getting this message saying, the user profile service failed the logon, User profile cannot be loaded. Please someone tell me how I can fix this problem. I tried rebooting my computer but that did not seem to work please help me:( thank you!

A:[SOLVED] I'm getting this message saying the user service failed the logon user profi

I had forgot to mention I have an hp windows 7 laptop!

http://www.techsupportforum.com/forums/f217/solved-im-getting-this-message-saying-the-user-service-failed-the-logon-user-profi-951817.html
Relevancy 64.5%

Hi In A domain environment when wifi user a reseting connect cannot user directory from password to Active after i rest a user password from active directory users and user cannot connect to wifi after reseting a user password from Active directory computers he is unable to login to Windows with new password He is configured to login through wifi And we are using single sign on in the wifi settings This issue is only affecting few users connection to company wifi network is authenticated through x so we manualy create a wifi profile for x At the dual login screen the new credentials we are using active directory credentials for wifi since it's x are entered First it user cannot connect to wifi after reseting a user password from Active directory spits an error that unable to connect to wifi Then windows spits an error of invalid user name or password If we enter the old credentials at login in both wifi access and windows access we are able to login to Windows it logs in with Cached credentials but I it obviously is unable to connect to wifi network The user is a member of wifi group so he has access to wifi and he can access wifi through his iPhone Also another observation is that if I login with his Cached credentials and configure a wifi profile connection using his new reseted password password windows spits an error that cannot connect to the network So the core issue is that after reseting his password from active directory users and computers he cannot connect to wifi through windows The workaround that currently I do is i login with his Cached credentials to Windows and then i use my own credentials to configure wifi connection and ask him to login to Windows using his Cached credentials while he will be using my credentials for wifi access And for other systems that will be using credentials like email he uses new credentials Pretty crude solution Any way how to figure out what could go wrong Besides i have tried configuring a wifi connection profile on another users laptop using the affected user credentials I got same error that windows cannot connect you to wifi So the real issue is that after resetting the password of the user from aduc he cannot connect to wifi Any clue idea Windows is latest and updated We are using Microsoft forefront endpoint protection

http://www.techsupportforum.com/forums/f217/user-cannot-connect-to-wifi-after-reseting-a-user-password-from-active-directory-769826.html
Relevancy 64.5%
Relevancy 64.5%

Hi, I am using Teamviewer to remotely control my friend's computer and help him with tech problems, and I need to help him with a certain thing that will take a long time. He gets bored of me controlling the computer for so long, so I want him to be able to do something else on his computer while he waits. Can I control his computer in the background while he has a different window open so he can watch videos while I work on his computer?

And if not, is it possible to make a 'plugin' for teamviewer to do this?

I really need this feature, so thank you so much to anyone that can help me with this.
 

A:Solved: Teamviewer MultiTasking (Local User and Remote User Using At The Same Time)

https://forums.techguy.org/threads/solved-teamviewer-multitasking-local-user-and-remote-user-using-at-the-same-time.1107145/