Windows Support Forum

Found new hardware " High definition audio bus' - what?

Q: Found new hardware " High definition audio bus' - what?

I cant seem to find drivers to install the above?

The intel site says they should be included with my GM945 graphics drivers, but it wont find them!

So, i have the drivers for my chipset but it wont work - microsoft say its included in xp so whats going on??

Relevancy 100%
Preferred Solution: Found new hardware " High definition audio bus' - what?

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Found new hardware " High definition audio bus' - what?

I believe you're getting help here: http://www.techsupportforum.com/f19/...op-224022.html

http://www.techsupportforum.com/forums/f10/found-new-hardware-high-definition-audio-bus-what-224084.html
Relevancy 20.21%

Hey guys I have been trying to set up my tv so I can watch movies online... to say the least it is not going well.. I have been trying for over 2 hours and 2 trips to Best Buy to figure out why i have no sound on my tv.

My headphone jack does work.
There is a picture due to the vga cable.
I have a Y Cable plugged all in but no sound

Please someone help!!
 

A:Laptop to TV no audio with VGA cord and y cable

Hey, I've tried to set this up at one point.. VGA doesn't seem to give sound at least on some T.V's so if you have a sound input you could try:
amazon [dot ] co.uk/s/?ie=UTF8&keywords=vga+with+audio&tag=googhydr-21&index=aps&hvadid=8326471606&ref=pd_sl_2xe1bbnp3q_e

sor maybe you could get something like:
electgadget [dot] co.uk/sg/index.html?s=3219F6825E2CD6CA31C2DE7A93A69CF9&p=51679ce3738a69b94d40325e0e3d57db&m=1324951106152&a=/products&categoryid=28&stockid=460

play [dot] com/Electronics/Electronics/4-/20708900/Trixes-HDMI-Male-To-VGA-Cable-1-8m/Product.html?_%24ja=tsid:11518|cat:20708900|prd:20708900

However I don't with to take the blame if any of these don't work
 

http://www.techspot.com/community/topics/laptop-to-tv-no-audio-with-vga-cord-and-y-cable.175240/
Relevancy 20.21%

Every 10 seconds audio manager will set the volume on my mic to 0 and mute it I have already tried to uninstall it and reinstall it but no result.
It may be malware but I am not sure as of yet. Would really appreciate help right now.
 

A:Realtek Audio Manager Mic Problem

Problem Solved, As suspected it was malware. To fix this launch task manager, then go to start up, go through the list if something dosn't have a icon or dosn't seem to fit in right click and open its file location. If you are definite that it is malware disable it, restart go to the file location and delete all the files.
 

http://www.techspot.com/community/topics/realtek-audio-manager-mic-problem.216938/
Relevancy 20.64%

Hello guys,
So I build myself a new PC and I plugged in the headset that I have and found out that audio is louder on the right side, and I got it centerd after a while but I had to go to Sound manager and manually increase the audio on the left! But then, the sound is more queiter and I don't want that!
I know that this isn't a problem with my headset because they work fine on other PCs and I tride some others headphones and they had the same issue(on this PC)! My audio drivers are up to date and they are Realtek HD audio!
Is there anyone that knows how to fix this?
Thanks in advance!
 

A:PC audio isn't centered as it is supposed to be

Having the same problem with high quality audio equip

my research:

it is on every pc that gives digital audio via usb, spdif, or the 3,5 jacks from onboard soundcards aswell as hifi soundcards

so far, only music players did give me a correct audio image. VERY wierd, working on this since about 1 year and no audio expert could give me a good way to work around it OR a solution
 

http://www.techspot.com/community/topics/pc-audio-isnt-centered-as-it-is-supposed-to-be.209506/
Relevancy 20.21%

Hello,

first I already wanna thank everybody who replies to this and try to help me. Yesterday morning I tried to download a sound driver that would make the Stereo Mix option available. It was not from the original website of Realtek or HP. It was from here: http://driveragent.com/c/archive/196a161c/Realtek-High-Definition-audio#summary. After I finished the installation and restarted my PC there was a red cross next to the sound icon and when I tried to open volumemixer it said 'No audio output device installed'. I tried to uninstall it with system restore. Than I also tried to install the latest sound drivers from the Realtek and HP site but both didn't work. Also I saw on another topic that maybe some services were stopped but that wasn't. Now I really don't know what to do. Hope someone can help me.

Tsjeuke

PC manufactrurer: HP
Operating system: Windows Vista Home Premium SP2 32-bit
 

A:There is no output device (Realtek HD Audio)

Your PC manufacturer is HP but what is the model?
 

http://www.techspot.com/community/topics/there-is-no-output-device-realtek-hd-audio.216620/
Relevancy 43.43%

I just solved my own problem and thought others might benefit since I could not find the solution using internet search My Realtek HD Audio manager seemed to be creating an echo on my quot Line In quot HD Audio Realtek "line from effect) (if in" echo it Removing output sound not a is audio signal I had already set the environment and equalizer sound effects options to lt None gt but the echo persisted I found the problem seems that I was essentially duplicating the Removing "line in" echo from Realtek HD Audio output (if it is not a sound effect) Line In audio stream The first quot source quot I found was the HD Audio manager You can open the manager and view the Line In tab - mine had a non-zero playback volume the slider was NOT all the way to Removing "line in" echo from Realtek HD Audio output (if it is not a sound effect) the left for zero playback If you want Removing "line in" echo from Realtek HD Audio output (if it is not a sound effect) output from the HD Manager that makes sense I also found out a second Line In quot source quot It was in the Line In properties settings where I had checked off the option to quot Listen to this device quot When I disabled that the echo disappeared To view this Line In properties tab right-click on the speaker icon in the notification area then select Recording Devices yes quot Recording quot Then the tab will display in a window with the title Sound You should see the Line In device in the list Right-click on this item and select Properties The Line In properties window pops up Then select the Listen tab UNselect Listen to this device The echo should disappear if you re experiencing my problem I hope this helps someone I m just trying to help the community from which I ve received so much help grinthumb nbsp

A:Removing "line in" echo from Realtek HD Audio output (if it is not a sound effect)

Two same signals

You're doing the right thing... getting rid of the other input signal.
 

http://www.techspot.com/community/topics/removing-line-in-echo-from-realtek-hd-audio-output-if-it-is-not-a-sound-effect.178881/
Relevancy 21.5%

Just checking it seems like something is not wife's on this - my Keyboard - - found disabled getting computer of EPP tired still wrong on this computer just using a standard plain usb keyboard All of a sudden this morning when she was changing a plain ordinary mouse the keyboard quit working it works on Keyboard not found - EPP - disabled - getting tired of this on my wife's computer another computer the mouse works while using the same usb port in device manager there is no entry for Keyboard in devices and printers way down at the bottom a quot usb multimedia quot keyboard shows but when I try to look at the drivers there are several drivers and I cannot delete or disable any Looking at the HID compliant consumer control device driver details there are no drivers Device Manager Keyboard shows keyboard there are speed settings but in the hardware tab no name manufacturer location or device status Just in case with all of the problem we have had lately I did some scans the dss scan seems strange Is it mbam Windows Service Pack x NTFS Internet Explorer Motherboard FOXCONN Keyboard not found - EPP - disabled - getting tired of this on my wife's computer AB Processor AMD Phenom tm II X T Processor CPU mhz Disk Partitions C is FIXED NTFS - GiB total GiB free D is FIXED NTFS - GiB total GiB free E is CDROM F is Removable G is Removable H is Removable I is Removable J is Removable K is CDROM M is NetworkDisk NTFS - GiB total GiB free P is NetworkDisk NTFS - GiB total GiB free R is NetworkDisk NTFS - GiB total GiB free S is NetworkDisk NTFS - GiB total GiB free T is NetworkDisk NTFS - GiB total GiB free Something is rotten in Denmark nbsp

A:Keyboard not found - EPP - disabled - getting tired of this on my wife's computer

Some place I saw a message that windows updates was set to no update hareware files, but I can't find where to change that.
 

http://www.techspot.com/community/topics/keyboard-not-found-epp-disabled-getting-tired-of-this-on-my-wifes-computer.191043/
Relevancy 20.64%

Hello, I have a brand new ASUS laptop with REAltek and WINdows 8.1. The frustrating issue I have is that my headphone audio sounds as if there is an echo-like sound to it. More like a sewer-pipe. I have restarted the audio programs under computer management. set the default in REALTEK to 16 bit 48000, and all devices seem to be operating fine. I even uninstalled SKYPE as suggested.The test in REALTEK is also okay. Please, any assistace would be more than appreciated.
 

A:Headphone audio on laptop

It sounds hollow with no bass or clarity. I have adjusted the equalizer to no avail.
 

http://www.techspot.com/community/topics/headphone-audio-on-laptop.216378/
Relevancy 22.36%

I have a choice to make on a new monitor.

It needs to be VESA mountable and will be for strategy gaming and work purposes. Games like Wargame, Supreme Commander and World of Tanks. I work as a sysadmin so think lots of windows open!

Do I get a 24" monitor like this Benq (recommendations on a different one are welcome)

Or do I get a 27" monitor. If you think 27" what res would you recommend baring in mind I am sporting a 760gtx.

Thanks,
 

A:24" monitor or 27"

I think 1080P is the best bet for your GTX 760. 2560x1600 or 2560x1440 (27 inch panels) might be a bit too much. It is really personal preference whether you weant a 24 inch or a 27 inch. There are 1080P monitors in both sizes. I recommend Dell, BenQ, ASUS, Samsung, and ACER monitors. There are some other good ones, but I cant think of them off the top of my head.
 

http://www.techspot.com/community/topics/24-monitor-or-27.201808/
Relevancy 23.65%

While the AMD Radeon R9 Fury X has been praised for its compact PCB and powerful closed-loop liquid cooling solution, many Fury X owners noticed that the pump block included with the card emits an annoying high-pitched whine, ruining what...

Read more
 

A:AMD revises Radeon R9 Fury X pump block to kill high-pitched whine

Kill every sound, AMD, but the whining will continue...
 

http://www.techspot.com/community/topics/amd-revises-radeon-r9-fury-x-pump-block-to-kill-high-pitched-whine.216096/
Relevancy 21.93%

Hello,

I have been using the same set up for just over a year now and yesterday my monitor (which is just a TV with a HDMI port) stopped receiving signal.

I can boot up the pc and get the BIOS, which I can go into and see everything fine, as well as the windows loading icon but when it would normally go to the log in screen I get nothing.

I can however plug in an extra monitor (an actual Samsung monitor) with a VGA cable and it all works fine and on top of that if I connect the TV at the same time it works perfectly fine as a second monitor.

However if I try to turn off the VGA monitor and just use the HDMI TV then I get no video signal again.

No idea how to get my main TV monitor working again. Totally stumped.

OS: Windows 8.1
Processor: Intel Core i5-4570 CPU @ 3.20GHz
RAM: 8.00GB
Video Card: GeForce GT 620
MOBO: Asus Ranger VII
PSU: Corsair 500w
Monitor: Technika 22" HDMI + Samsung SyncMaster 2032 VGA
 

http://www.techspot.com/community/topics/monitor-no-video-found-when-main-display.215571/
Relevancy 46.44%

Corsair is well known for its PC components spanning a range of categories -- from memory to cases, power supplies, cooling and more. But this year it's trying something new with Bulldog, a barebones, console-like Mini-ITX box that's designed for...

Read more
 

A:Corsair goes for the living room with Bulldog PC kit, supports liquid cooling and high-end hardware

The case looks downright awful too me. I wouldn't have that thing displayed in my lounge.
 

http://www.techspot.com/community/topics/corsair-goes-for-the-living-room-with-bulldog-pc-kit-supports-liquid-cooling-and-high-end-hardware.213594/
Relevancy 25.37%

Hey there all.

This problem just happened recently. Every time I put a blank CD in my CD drive, a message appears saying "E:\ is not accessible. Incorrect Function. I can watch DVDs but it won't recognize any blank CDs I put.

Any ideas?

Thanks in Advance.
 

A:Drive is not accessible - "incorrect function"

First try this from the Windows Explorer after you have inserted a disc.

Right-Click on E: drive

Select Properties from the pop up menu

Select the Recording Tab

then check the "Enable CD Recording On This Drive" box.
.
 

http://www.techspot.com/community/topics/drive-is-not-accessible-incorrect-function.166087/
Relevancy 24.94%

AMD is today launching the A10-7870K, a new, high-end desktop APU that provides minor spec bumps over the company's previous desktop APU flagship at a similarly competitive price point.

Read more
 

A:AMD launches the A10-7870K, a new high-end desktop APU

The pricing is what kicks Intel in the nuts, which is great if you going for a low budget computer and don't mind not having a dedicated video card.
 

http://www.techspot.com/community/topics/amd-launches-the-a10-7870k-a-new-high-end-desktop-apu.213480/
Relevancy 24.08%

Many in the PC gaming world are turning their attention to AMD's upcoming Radeon R9 300 series launch and specifically, the R9 390X. According to the latest scuttlebutt, this card will ship with two different SKUs - an air-cooled version...

Read more
 

A:AMD Radeon R9 390X variant will come water-cooled with High Bandwidth Memory

Having to resort to water cooling just to be on par with nvidia what a joke
amd with their hot running primitive brute force gpus
 

http://www.techspot.com/community/topics/amd-radeon-r9-390x-variant-will-come-water-cooled-with-high-bandwidth-memory.212772/
Relevancy 24.94%

Oculus VR on Friday revealed the recommended hardware specifications needed to deliver the best experience when using its upcoming virtual reality headset.

Read more
 

A:A high-end PC will be needed for the best Oculus Rift experience

I don't get it? It's supposed to be peripheral device. like an LCD screen, just with inbuilt mouse pointer. What does your PC specs got to do with performance, other than necessity to setup the resolution for inbuilt displays? What does it mean 'games and applications created for the Rift in-house'? Does it mean it will require custom games and applications, no support out of the box for existing games? If that's the case, their VR is gonna die faster than 3D. Please tell Me I'm mistaken?
 

http://www.techspot.com/community/topics/a-high-end-pc-will-be-needed-for-the-best-oculus-rift-experience.213137/
Relevancy 25.8%

Hi,
the following are the specs of my computer:
Asus P8Z77-V- LX2 Motherboard
Intel i7-2600CPU @ 3.4GHz
16GB RAM DDR3 668.5MHz
NVIDIA GeForce GTX 780 Ti

I lag on almost every single game, including League of Legends, Maple Story, DotA 2. Most of these does not lag on my low-mid end laptop and I find it very annoying why has it been lagging on my PC. I thought it was a faulty graphics card back then when I had the ATI 6970M graphics card then I upgraded to the GTX 780Ti and it still lags.

I notice miracle happens when I was using my 6970M graphics card, whenever I uninstall and re install the driver of the graphics card at the "Manage my computer" program, the lag disables and I am able to play all games with no lag. However, after restarting, the lag resumes and I must repeat the same step to remove the lag. However, with my GTX 780Ti, it does not work.
 

http://www.techspot.com/community/topics/high-end-pc-lag-while-gaming.213241/
Relevancy 19.78%

I have a problem that I hope can be fixed I headset is up is that output Microphone audio receiving picking my just recently bought a new computer and I did not have the same issue on the old computer which was XP The one I have now is Windows bit home premium Same headset and everything Not using a sound card either just using an integrated one The problem I am having is this when talking to someone in Skype my microphone is somehow picking up any output audio that my headset is receiving For example when I m playing any game or listening to music and talking to someone they can hear everything that is happening with crystal clearness This was not happening on my old computer with the same headset So I m guessing it s a Windows thing but I have combed every option and I just don t know what to do They say it sounds like I m not even using a headset at all and people tell me to turn off my speakers and put on my headset all the time when this isn t the case It s not because my sound is on max either if I have the sound at they hear it at the exact same level on top of listening to me talk I have combed tons of forums and even found another thread with the same issue but it was outdated from years ago and no fixes for Windows I realllly need some help Any is appreciated nbsp

A:Microphone is picking up output audio that my headset is receiving

Right click the speaker Icon and select playback devices>>>Communications>>>Mute all other sounds
 

http://www.techspot.com/community/topics/microphone-is-picking-up-output-audio-that-my-headset-is-receiving.176509/
Relevancy 25.8%

I have scoured the from computer, sounds" can speakers "computing my hear my through I internet for a solution to this and have found nothing First my dxdiag is attached I have had this issue for over a year now and I am getting fed up If I put my ear to my pc I can hear computer noises coming from it I can not compare it to another sound as there is nothing else to compare it too it just sounds like my CPU or Hard Drive thinking That doesnt bother me though I expect my computer to make some noise HOWEVER I dont expect to hear it in my speakers too I have a lot of speakers and a lot of headphones no they are not I can hear "computing sounds" from my computer, through my speakers the problem Right now I am using a knappenberger tube hooked up to a GK MB just cuz I can When I plug in any speakers I can hear the CPU sound through them regardless of the volume level I can turn the speaker all the way down and yet the sound will come through This leads me to believe I can hear "computing sounds" from my computer, through my speakers it is a grounding issue or electrical to some degree I would like to try physically grounding my case to see if it would eliminate this God awful feedback However I can not find a guide as to I can hear "computing sounds" from my computer, through my speakers the best way to do this or any other suggestions So here I am Help me and earn my eternal gratitude Some notes If I unplug all of my cables except power and the speaker cable I still hear it if I plug in my speaker cable to my monitor instead of my PC I still hear it Front port still hear it I have yet to try a different sound card as I dont have one Once I find one I will update nbsp

A:I can hear "computing sounds" from my computer, through my speakers

Checked some settings in the Bios, noticed the sound isnt there while navigating it. Static started once windows loaded. Maybe it is some sort of issue with the hard drive
 

http://www.techspot.com/community/topics/i-can-hear-computing-sounds-from-my-computer-through-my-speakers.202182/
Relevancy 23.65%

Leaked specifications from a pair of upcoming Intel Skylake processors have hit the web. If accurate, we could see Intel pumping out CPUs with high clock rates on par with the company's existing Devil's Canyon offering.

Read more
 

A:Leaked specs for upcoming Intel Skylake CPUs reveal high clock rates, 95W TDP and more

@shawn
I read that the performance jump between Broadwell and Skylake will be like what we saw with Prescott to Conroe. Do you believe this is possible with the unlocked Skylake-S parts? Have you heard this rumour?
 

http://www.techspot.com/community/topics/leaked-specs-for-upcoming-intel-skylake-cpus-reveal-high-clock-rates-95w-tdp-and-more.212186/
Relevancy 24.94%

I have a desktop computer that is running on Windows Xp, up until this morning, everything was fine, I could connect to the internet with no problem.

I turned on my computer, and it is telling me that the network cable is unplugged, as well as my network is not showing when i go to "my network connections"

But yet.....

I AM connected to my router, and there is no problem with the cord (I tried it on different computers as well as my Xbox 360 on the same port....so I know its not the router)....when I go into device manager, everything seems to be working correctly, and my network adapter and ethernet card both are marked as working properly.

Any ideas how I can fix this issue ?
 

A:"Network cable is unplugged" but its really not..

sadgyrl514 said:





I have a desktop computer that is running on Windows Xp, up until this morning, everything was fine, I could connect to the internet with no problem.

I turned on my computer, and it is telling me that the network cable is unplugged, as well as my network is not showing when i go to "my network connections"

But yet.....

I AM connected to my router, and there is no problem with the cord (I tried it on different computers as well as my Xbox 360 on the same port....so I know its not the router)....when I go into device manager, everything seems to be working correctly, and my network adapter and ethernet card both are marked as working properly.

Any ideas how I can fix this issue ?Click to expand...

Try rebooting,
 

http://www.techspot.com/community/topics/network-cable-is-unplugged-but-its-really-not.166539/
Relevancy 24.94%

So to clear out what my hardware is my core is an intel i LGA For a bit of background - A few months back I encountered this problem that my high temperature with too constantly Problem CPU fan started to malfunction Though a few hours later the fan started to work again I used a flashlight to look into the CPU and yeah it was spinning Both of Problem with CPU temperature constantly too high them at equal rates So onto the actual problem I few days ago I just got my PC fixed since my vid card malfunctioned Fearing it was overheating I downloaded speedfan and now constantly check my GPU temperature However what worries me now is that it constantly reads my CPU temperature to be around - Celsius The frightening thing is it s ALWAYS at that range Even when I just turn my computer on despite it being in air-conditioning the temp is always at that range I also asked the guy who fixed my PC and said that it was a problem but that C is standard for a PC that s been used for hours Since I m kind of lazy to screenshot upload I ll just type out what it reads in Speedfan CoreTemp and CPU Thermometer Speedfan GPU C System C CPU C AUX C SMIOVT - C HD C Core C CoreTemp Tj Max C Core C Min Max Core C Min Max Load varies from - CPU thermometer reads relatively the same with a - C range What the hell is up with my PC and what can I do to solve it nbsp

A:Problem with CPU temperature constantly too high

Hello, omni23414.
It could be a miscalculation on the part of the on-die sensors, or a horribly failing cooling system.
I've checked Google for that chip's average temps, and they aren't supposed to be that high.
My CPU isn't a multi-core, so it by default doesn't generate much heat, but it's overclocked enough to make a toast.

Try disabling any 'Quiet fan' features in your mobo's BIOS, and check the temps.
For how long have you had this problem? Only recently, or since Day 1 of the assembly?

Try taking off all the fans and checking them individually. Check whether any fan is malfunctioning. If none is, it could be a case of bad case airflow. Or miscalculated temps.

Still, give me some more details on which programs you mostly run, how much load they give the CPU. I'll abuse Google for more information on your case.

Good luck!
 

http://www.techspot.com/community/topics/problem-with-cpu-temperature-constantly-too-high.179473/
Relevancy 24.94%

I'm trying to record some karaoke but every time I play back the recorded track, the music is "doubled" with a slight delay, as if the laptop's built-in microphone was picking up the music along with my voice. Here is an example:

http://www.singsnap.com/karaoke/watchandlisten/play/c58ef46c3

Notice how those staccato notes are doubled with that slight delay.

I'm using Windows 7 on a Dell laptop with Realtek.
Under Playback I have two devices: Loudspeaker (enabled) and Realtek Digital Output (disabled)
Under Recording I have: Microphone (enabled) and Stereomix (disabled)

I'm recording using headphones and the laptop's built-in microphone. This is what the Realtek Audio Manager looks like:

It's in German but most options are self-explanatory.

If you could help I'd be very grateful.

Thanks for reading.
 

http://www.techspot.com/community/topics/bleeding-when-trying-to-record-on-laptop.211024/
Relevancy 25.8%

I have been having this issue for about 2 weeks now. Ive literally tried everything including uninstalling/reinstalling network card, restore points (there are none), a windows update download, and reformatting the hard drive (wont let me). Any help is appreciated. I cant afford a new pc or any new hardware at this time.
 

A:"Failed to query TCP/IP settings of the connection. Cannot proceed."

failed to query tcp/ip settings of the connectionClick to expand...

what did you do when this occurred?

Describe network equipment {modem, router} ISP, and your system.

Connect it all together, get a command prompt, enter ipconfig /all >myTcp.txt
and come back here and paste the contents of myTcp.txt as your reply
 

http://www.techspot.com/community/topics/failed-to-query-tcp-ip-settings-of-the-connection-cannot-proceed.177223/
Relevancy 20.21%

I have one problem with my PC sound on board,
My pc is windows 7 ultimate 32bit, Intel Desktop Board E210882,
The driver is already install but the icon of sound still red cross like image attach file, I already plug in the headset, any one please help me?

thank, seahong heng
 

A:No audio output device is installed

Well, one way or another, your computer isn't using the device, so have you checked to see if it's disabled in any way? right click the speaker and go to playback devices, it'll come up with a list of your sound devices, make sure the one you're trying to use isn't disabled (right click to change that) if you're unsure which is yours, just enable them all lemme know if that helps at all
 

http://www.techspot.com/community/topics/no-audio-output-device-is-installed.188878/
Relevancy 25.37%

Hi my daughter tried to adjust the resolution and now the screen is Black and stuck on Out Of Range. I cannot even get it safe mode or anything. Just a black screen with the writting. It's a windows xp 32. My son is so sad if anyone knows what to do please help. Thank you.
 

A:PC monitor screen is black & says "Out Of Range"

Repeatedly press F8 while the system is booting.. The very first stuff you see on screen will either be your motherboard splash screen or some text. When you get to the menu where you can make a selection, choose VGA mode NOT Safe Mode. That will boot your computer at 640x480, but it will boot with full driver support, just as if things were normal. Change the resolution to what you want after that.

Remember if you change it to something that goes 'out of range' DO NOT touch anything for 15 seconds. It will revert back to what it was after that time and you can try again.

Unrelated.. Go to school at UMR? or different Miner?
 

http://www.techspot.com/community/topics/pc-monitor-screen-is-black-says-out-of-range.210867/
Relevancy 18.06%

Hello I have a PC with HDD - GB not IDE - GB IDE I could boot normally with both connected Everything worked even tho in the Jmicron thing before booting I see only any no found drives Detect Drives:done, the gb drive So I bought a new PC and decided to sell this old one but only with the GB HDD So I removed the GB IDE hard disc and now the computer can t Detect Drives:done, no any drives found boot Jmicron thing Detect Drives:done, no any drives found says this error quot Detect Drives done no any drives done quot and after a second I get a black screen with message that says I need to select a proper boot device I ve selected this GB HDD on which the Windows is installed in BIOS it is set as primary boot device Things what I ve done -Changed SATA to IDE RAID AHCI - when RAID the HDD can t be found -Reset BIOS to Defaults - no result -Removed the battery - no result -Added back the IDE drive - no result -Changed the cables in the motherboard there are x sata cables red black the red ones I guess are for Jmicron so I connected the hdd on all of them and no result -Disabled Jmicron thing in BIOS and the message where it says that no drives were found is now skipped and I get to the black screen with message about Selecting proper boot device -Connected this GB HDD to the new PC - booted without problems So I guess this is something in the BIOS that IDE drive I removed changed and I dont know how to fix it The BIOS detects the HDD it s set on first position in the boot device priority I even disabled the others - still nothing but I get the error that there is no boot media Please help Thanks nbsp

A:Detect Drives:done, no any drives found

Ok I fixed it . What I did:
-used windows 7 disc and ran a repair ( note I have a windows 10 installed xD) so the first repair couldnt find the drives so it did something.
-after this repair it restarted I opened the repair again and now I saw my C:\ drive with windows 10 enterprise installed. I clicked and I pressed repair and now it said I need windows 10 repair disc.
-I changed SATA type to RAID and booted successfully.
-at the boot it asked me whether I want to start windows or repair. I clicked on repair.
-after the repair it restarted. Message apeared "Getting Devices Ready" - took about 5-10 mins
-PC booted successfully with no Data loss
 

http://www.techspot.com/community/topics/detect-drives-done-no-any-drives-found.210292/
Relevancy 24.94%

So I ve been monitoring my computer s temperatures and I must admit I m not happy with what I ve seen After gaming my FX- has been reaching temperatures above the C max recommendation temperatures FX-8320 high Stock with that AMD has in place The highest I ve seen so far Stock FX-8320 with high temperatures is C which is just outrageously high I m running my FX- at completely stock speeds with the stock fan on a Gigabyte FXA-UD rev motherboard Now as of writing this thread I Stock FX-8320 with high temperatures have already ordered a Cooler Master Hyper EVO as my research suggest that this is a very capable fan for an FX- xxx series processor at stock speeds and maybe even a modest overclock as well I actually intended to get this cooler earlier in my system s life but I ve been lazy and frugal and figured that the stock fan would be fine for stock speeds I also figured my spacious Antec case with a ton of fans at max speed would ve been enough Anyway what shocked me is that when I built this system I kept a very close eye on temperatures during gaming and I never would exceed C under load and idled around C Now quite a while down the line the same cooler can hardly keep the processor below C under load but when the machine is idle I get really low temperatures so low it s at C at some points I ve included a screenshot of both these situations So frankly put what the hell is going on here My idle temperatures are better than ever but my load temperatures are worse than ever Could I have an inaccurate sensor on my processor As precautionary measure I already cleaned out all of the dust filters in my Antec quot Illusion quot case photo also included I also opened that puppy up and blew as much dust out as I could off of the components so it s not real dusty in there anymore The heatsink fan combo was properly secured so it doesn t seem to have become improperly seated over this time Despite this I haven t seen an improvement in temperatures Any assistance in figuring out what the deal is here would be greatly appreciated My specs are as follows AMD FX- GHz Vishera Gigabyte GA- FXA-UD rev G Skill Sniper GB DDR - RAM Gigabyte GeForce GTX GB WindForce Western Digital Black TB SATA-III HDD Antec Illusion case Antec HCG W PSU Windows Ultimate SP x x mm Antec fans mm Antec fan nbsp

A:Stock FX-8320 with high temperatures

Have you cleaned the actual cpu cooler? If it has as much dust as your filter does, that could really affect the efficiency of the cooler. I have both a 8320 in a build and a 8350 and I use AIO water coolers such as Corsair H80 or H100.
The CoolerMaster Hyper 212 EVO is a very good air cooler. Take your time mounting it and be sure to use quality thermal paste.
 

http://www.techspot.com/community/topics/stock-fx-8320-with-high-temperatures.202655/
Relevancy 25.37%

For the past month, Nvidia has faced its fair share of bad PR thanks to the GeForce GTX 970's memory allocation issue. As has been uncovered by users and explained by Nvidia, the GTX 970's last 512 MB of VRAM...

Read more
 

A:Nvidia CEO says GTX 970 memory controversy "won't happen again"

Again: the performance didn't change overnight; it's today the same performance than the advertised on launch date. Even that technicality can kill the case. Specifications were the "misleading" part.
 

http://www.techspot.com/community/topics/nvidia-ceo-says-gtx-970-memory-controversy-wont-happen-again.209149/
Relevancy 24.51%

Hi guys, while playing DOTA 2 (on lowest settings), I am experiencing the problem that my FPS is down to 30 almost all of the time. This started about a month ago and is really annoying to me, which is why I decided to updgrade my hardware in order to fix this problem. Now I am facing the problem though that I have no idea which parts of my hardware cause the low performance and thus need to be exchanged, some help would be very much appreciated.

I have the Medion Erazer X6817 with the following hardware:

CPU: Intel Core i7-2670QM @ 2.20 GHz
Graphics Card: NVIDIA GeForce GTX 560M
RAM: 4GB DDR3

OS: Windows 7 Home Premium, 64 Bit
Some Additional Facts:

I use a LG 24MPHQ Monitor to display the game at 1920x1080 resolution
When playing RAM usage is constantly at about 3,2 GB, CPU Usage pending between 15 and 45
So what part of my notebook do I have to upgrade to improve my FPS?
 

A:Hardware Upgrade to fix low FPS?

If you can upgrade your RAM to 8 gigs that might help; it seems to be the sweet spot for gaming. Otherwise Dota 2 is not that demanding on hardware.

As one who is experiencing League of Legends disconnects I have found through the help of jobeard and Rage_3K_Moiz that it probably has to do with my internet connection. Here are 2 that I ran (both are safe) to check for Packet Loss:

http://netalyzr.icsi.berkeley.edu/
http://www.dslreports.com/pingtest
 

http://www.techspot.com/community/topics/hardware-upgrade-to-fix-low-fps.208832/
Relevancy 22.79%

Nvidia's G-Sync technology is currently available on a handful of displays but the cost of entry isn't cheap. That's because the current crop of monitors require custom hardware to work their gaming magic - a requirement that soon won't be...

Read more
 

A:Nvidia G-Sync technology is coming to laptops, no custom hardware required

LOL the G-Sync module was only ever used to verify 100% that someone was using a Nvidia GPU. What a bunch of crooks...
 

http://www.techspot.com/community/topics/nvidia-g-sync-technology-is-coming-to-laptops-no-custom-hardware-required.208532/
Relevancy 25.8%

As you've probably heard by now, Nvidia is having a few issues with their GeForce GTX 970 graphics card. In response, AMD has lowered the price of the card's main competitor, the Radeon R9 290X, in an attempt to get...

Read more
 

A:AMD cuts Radeon R9 290X price amid GTX 970 "issues"

Meaning AMD could have been selling the card cheaper this whole time.

AMD needs to stand more firmly in their business decisions. Changing prices on a whim every time the wind blows, shows lack of confidence in their product to sell itself.
 

http://www.techspot.com/community/topics/amd-cuts-radeon-r9-290x-price-amid-gtx-970-issues.208450/
Relevancy 20.64%

Hey ya so I'm having pretty much the same problem and I'm not finding anything you guys are talking about. Here's my problem. Like the rest of you I'm having troubles with recording the audio from my computer using the stereo-mix setting in audacity. This occurs only when my usb microphone is plugged in. I understand that it has something to do with changing the inputs or outputs or something I'm just having trouble understanding where those are on my computer. My setup is this. I'm running on a laptop that has windows technical preview. My microphone is directly plugged into my laptop via usb (obviously) and my headset plugged directly into the microphone. If someone could please tell me step by step where to go on the computer and what to do to fix this so that I can have my microphone plugged in and also record my computer that would be great. I know this is over 2 years old but I'm hoping someone sees this and is able to help.
 

A:Trouble recording audio

I am surprised no one has replied to this yet, but no worries, I will do my best to help solve your problem

So from the sounds of it, you are having troubles with Audacity noticing your Microphone to record audio. Now, I have never used this program before, but from the sounds of it the only thing you are missing is setting your headset/microphone to the default in windows.

Now, I have not used Windows Technical Preview either, but based on how window's has operated since Windows Vista I am going to say it's safe to assume I could point you in the right direction to the very least.

To start, in the bottom right hand corner (Near your time) you have icons. One of them should look like a speaker, right click it and select "Recording Devices" In here you should have the option to make your Microphone the Default device.

Another way to get to this option if it's no longer accessible the way I described is to go to Control Panel, if you have the option in the upper right hand corner of the screen that says "View by:" and change it to large or small icons. There should now be one just called "Sound" in there go to "Recording" at the top.

Now in this window, find out which one is your device, easiest way is to make sure the mic is not muted (a lot of headsets have a mute button on them) and just speak into the mic, you should see the bar fill with a bit of green when you're taking, this indicates it's picking up sound. Set the "Default" to the headset you are using and then close and reopen Audacity (most of the time if the program is open when you change the default, it wont pick up on it)

let me know if any of that worked, didn't work, or you have any trouble finding what I have mentioned.
 

http://www.techspot.com/community/topics/trouble-recording-audio.208161/
Relevancy 19.78%

Hey, I'm a new member here with a problem!

I have a pair of Skullcandy Crushers with an arguably great built-in mic that turn on with a press of a button. However I built a new computer a few days ago and installed the latest version of the ASUS Realtek HD Audio manager, and while the audio on the headphones work, the mic refuses to work and isn't even recognized on programs like Skype and Hangouts.

I have tried the front two ports and tinkered with the settings and nothing has worked as of now, please help ASAP!

-Extabyte
 

A:Skullcandy Crusher mic not working with ASUS Realtek HD Audio Manager

Yeah thats because Skullcandys aren't really built for computers, just iPhone & Android. I had the same issue with my Skullcandy headphones and decided to buy a legit for PC headset. Sorry you spent your money on them!
 

http://www.techspot.com/community/topics/skullcandy-crusher-mic-not-working-with-asus-realtek-hd-audio-manager.204154/
Relevancy 25.8%

I have a mystery on my hands. I received a Bluetooth speaker as a gift. The BT-4.0 adapter plugged into my computer (USB-2.0 port) detects it (as a "Bluetooth headset"), but when I try to select it as my output device (from the "Sound" Control Panel), Windows reports it as "Disconnected".

If I open "Devices and Printers" and right-click the "Bluetooth headset" icon, I get an alert that the device "Failed to initialize".

I've tried rebooting, tried a different BT adapter, updated my BT drivers off the makers' website, Device Manager shows everything is connected & working (including "Bluetooth Audio").

64bit Win7 Home. Inateck BT-4.0 usb adapter. Speaker is a "MicroBoom" BT v2.1:
Any ideas?

PS: Eliminated the obvious. Speaker is fully charged and works just fine with my phone.
 

http://www.techspot.com/community/topics/bluetooth-headphones-paired-but-disconnected-failed-to-initialize.207624/
Relevancy 20.21%

I am running a Windows 7 x64 machine with an Asus motherboard, AMD FX-8350 Eight-core processor, Radeon HD6450 graphics card, 11 GB ram with two monitors. The problem is audio & video are constantly starting & stopping (very choppy). I have updated my os, flash, java and shockwave. All my browsers are up to date. It doesn't matter if I try to play something in a browser or something I have on my computer using windows media player or vlc... everything is choppy. It is constant & is driving me to drink... Any help and/or suggestions would be greatly appreciated.
 

A:Audio & Video choppy during playback

Once check your laptop or desktop chipset drivers are working fine or not, its effects the other related devices functioning. update or install the latest chipset drivers and video and audio drivers which are compatible with your system.
 

http://www.techspot.com/community/topics/audio-video-choppy-during-playback.207417/
Relevancy 24.51%

Hi Sorry for the long post but I wanted to provide as much info as possible for a better solution I have been experiencing strange clicking sounds please see link coming from my XFX HD lately or it can XFX PC noise, 4850 temp HD and clicking then High crashes be from PSU I have been using this card since years It XFX HD 4850 clicking noise, High temp and then PC crashes used to be very rare only at bootup but ever since I have started playing Bioshock infinite it has become much more frequent Initially I did not get any problems playing but last time I could only manage hr and then mins before pc crashed Today when I started the pc there was not any of that sound but XFX HD 4850 clicking noise, High temp and then PC crashes after minutes the hideous sound started and after few seconds pc shutdown This happened again and again with shorter time frames Interesting thing is I did not even played the game was only browsing the potential problem on the net Turns out it can either be -Some hindrance in fans spinning -Coil whine -PSU problem I couldn t pinpoint the exact problem I tried listening to it very closely could only guess that it was coming from gpu it also seemed very hot Using GPUz I started monitoring and gpu temp went from - C range to C within minutes before it shut down So it seems gpu is the reason I put a bit of load on gpu by emulating a game in pj during that time I had got my power outlets checked by a voltmeter few days ago the electrician said they were fine My desktop airflow is good never had a high temp problem with my cpu and side of the cover is always open My questions are -Can I underclock my gpu so that it consumes less power -Do I need to install ccc since I haven t earlier -I used an air blower a couple of months ago and also cleaned the gpu with a brush did nt find much dust or any object blocking the fans I can t rma since I had a bad time doing that in the last few times other h w long wait Also I don t have a built in gfx with this build What do you suggest Thanks Link screens and audio http s tinyupload com index php file id GPUZ min max temps Date GPU Core Clock MHz GPU Memory Clock MHz GPU Temperature C Fan Speed Fan Speed RPM RPM GPU Load GPU Temp DISPIO C GPU Temp MEMIO C GPU Temp SHADERCORE C Memory Usage Dedicated MB Memory Usage Dynamic MB VDDC V - - - - Update After I cleaned my pc again with air blower and also the gpu separately tested the system Starting temps were better from c instead of c and biggest difference was the dramatic reduction in fans rpm previously and now - rpm and noise But bad news is during those - mins the gpu temps kept rising again even at gpu load and once I put a bit of load on gpu - via pj emulater it rised to c before pc shutdown again So does it means I have to apply thermal paste too Or can this be fixed if I update the gpu driver Please any solutions suggestions wil be really appreciated nbsp

A:XFX HD 4850 clicking noise, High temp and then PC crashes

I'm having a bit of trouble following (more than likely my fault). What is the GPU fan speed during load?

If the RPM's seem normal, it could be thermal bond in the thermal paste that is broken.
If the fan speed doesn't appear to be normal, the fan itself could be broken.
 

http://www.techspot.com/community/topics/xfx-hd-4850-clicking-noise-high-temp-and-then-pc-crashes.207299/
Relevancy 25.37%

Hey guys I've got a problem. My GPU GTX780 GHz is making a buzzing / whining sound at very high fps and I mean 300+. I tried to google it but most buzzing seems to be made by PSU however PSU has nothing to do with fps. And I assume that the power consumption is roughly the same when playing Crysis 3 120 fps or Dead Space 2 400+ fps.
Yes I know I could use v-sync but sometime it causes noticeable input lag.

Is it normal? Safe for the GPU? Does it go away?

Thanks for info
 

A:GPU buzzing / whining at very high fps

What is you PSU make and model? When was the last time you cleaned your system out (physically powering down, opening the case and removing all the dust - especially on all the fans)? Do you monitor your internal temps when you game - if so what are they when you game? Have you overclocked anything?
 

http://www.techspot.com/community/topics/gpu-buzzing-whining-at-very-high-fps.207333/
Relevancy 23.65%

Updated my hardware drivers including the wireless adapter, and something must have gotten changed as I can not connect to wifi anymore on HP Notebook G72-253NR with Windows 7.

Flushed winsock, released/renewed ipconfig and deleted/reinstalled adapter. Can meanwhile connect thru Ethernet cable again but not wifi. Finds my wifi network (previously didn't) but can't connect, don't have tcp/ip addresses in LAC or wireless properties, automatically obtain is enabled. IPv4/6 enabled in both also.

Getting message of "HOST Process was prevented from changing settings of ZoneAlarm by modifying registry key HKCS/Services/VSDATANT? at initial startup.

"COM surrogate was prevented from changing settings of ZoneAlarm by modifying registry key HKCS/services/vsdatant" whenever I simply access/exit ip protocol settings.

How can I fix this? My brain is fried after several DAYS of trying to fix my friends computer... Please someone help!
 

A:Can't connect to wifi after hardware driver update

Call your ISP they will walk you through it.
 

http://www.techspot.com/community/topics/cant-connect-to-wifi-after-hardware-driver-update.206983/
Relevancy 20.64%

I just got a new computer...with Realtek HD Audio. Specifically: Realtek ALC888S.

The computer has no bass. Music played through YouTube, Winamp, WMP, iTunes, or through games have essentially nothing coming out of the sub.

I do have 5.1 selected, that is what my setup is.

Here is the weird thing. When I plug my MP3 Player into the Line-In and play through there, the bass sounds great. When I play from inside the computer, there is none. Can anyone point me to some places to look inside the Realtek HD Audio Manager? I can't seem to find anything useful in there at all.
 

A:Realtek HD audio, no bass

have you checked the bass management and swap bass and center option? you might want to try checking those option to check if it bring back the bass.

btw also try the 5.1 speaker test to check if all channels sound properly.
 

http://www.techspot.com/community/topics/realtek-hd-audio-no-bass.166680/
Relevancy 19.78%

When I am playing a video with any browser it is very choppy (sound and video).
Even Window sounds are choppy. It seems like if I move the mouse it gets worse.

Computer is very slow to open programs, even though the system idle process
is at 99% before starting another progam. This happens even when no browser is open and the
anti-virus software is disabled.

I don't know is this is a software or hardware issue.
 

A:Computer very slow. Choppy video and audio playback from browsers

Post this here:
http://www.techspot.com/community/forums/virus-and-malware-removal.28/
See if they can help with this problem
 

http://www.techspot.com/community/topics/computer-very-slow-choppy-video-and-audio-playback-from-browsers.207159/
Relevancy 24.51%

This is my current setup and am wondering if there's anything that can be improved.
primary hard drive 210GB Samsung SSD
secondary hard drive 931 GB Western Digital
8 GB DDR 3 dual channel memory
2TB Western Digital Passport external hard drive
Intel i5 2500K processor (not overclocked)
After running Winaero WEI tool I was supprised to see my primary hard drive is the bottle neck as it's SSD. Is there a way I can tell that SSD is primary, and not the old hard drive?


I run Windows 8.1 as main computer, then with VMware I run Windows 7 from secondary hard drive (all of its files are on secondary hard drive).

I noticed with the VM running some programs take a while to load the first time. For example Maple and Photoshop take 10 seconds, but if they are closed and open again then they take 2 seconds to open. Also with the VM and Firefox running 75% of memory is used. Does this mean I need more RAM?
 

A:Best setup with hardware

All that means is drive as far as windows is concerned is slower than the graphics card, memory ,and processor is. that means nothing. u'r computer is fine.
 

http://www.techspot.com/community/topics/best-setup-with-hardware.206940/
Relevancy 25.8%

Hello It may seem like a simple problem but I know nothing of the subject and I ve had the problem for ages Whenever I copy large files Movie size think MB the copy progresses very remaining" drives "5 sec Copying to/from stuck before for flash on 30 finishing seconds fast MB s until it reaches about where it gets stuck for about seconds to a minute and it says quot Time remaining seconds quot during all that time I have this problem with any flash drive in any USB port amp It also happens when copying to network drives and external harddrives which leads me to think it s a software windows issue Some vital information Copying to/from flash drives stuck on "5 seconds remaining" for 30 sec before finishing The flash drive I mainly use is USB quite new and easily capable of MB s writing speeds It reaches about - MB s during the copy until the final point where it still says MB s but does nothing for seconds USB port is also and I ve also tried every single other port in my computer None are broken and none ever show any signs of being slow The flash drive is NTFS formatted but it used to be FAT I ran checkdisk to see if there was anything wrong but there wasn t It s NTFS since I occasionally need files gt GB I tried using TeraCopy to bypass the issue but this way doesn t reach speeds of over MB s which takes even longer in the end It does fix the hanging at issue I tried converting the drive back to FAT which removes the issue of it hanging at but again the speed doesn t go above MB s which means it takes longer in the end making it not worth it What bothers me is that the files transfer at the maximum speed right until the very end where it just magically gets stuck for seconds or more before finishing like nothing happened Please advise P S I shamefully have to admit I never safely remove my hardware nbsp

A:Copying to/from flash drives stuck on "5 seconds remaining" for 30 sec before finishing

Marty9231 said:





Hello!

It may seem like a simple problem, but I know nothing of the subject and I've had the problem for ages.

Whenever I copy large files (Movie size, think 700MB+), the copy progresses very fast (~100MB/s) until it reaches about 99% where it gets stuck for about 30 seconds to a minute, and it says "Time remaining: 5 seconds" during all that time.

I have this problem with any flash drive, in any USB port (2 & 3). It also happens when copying to network drives and external harddrives, which leads me to think it's a software/windows issue.

Some vital information:

The flash drive I mainly use is USB 3.0, quite new and easily capable of ~150MB/s writing speeds. It reaches about 120-130 MB/s during the copy until the final point where it still says 130 MB/s but does nothing for 30 seconds.

USB port is also 3.0, and I've also tried every single other port in my computer. None are broken, and none ever show any signs of being slow.

The flash drive is NTFS formatted, but it used to be FAT32. I ran checkdisk to see if there was anything wrong, but there wasn't. It's NTFS since I occasionally need files >4GB.

I tried using TeraCopy to bypass the issue, but this way doesn't reach speeds of over 20MB/s which takes even longer in the end. It does fix the 'hanging at 99% issue'.

I tried converting the drive back to FAT32, which removes the issue of it hanging at 99%, but again the speed doesn't go above 20MB/s which means it takes longer in the end, making it not worth it.

What bothers me is that the files transfer at the maximum speed right until the very end, where it just magically gets stuck for 30 seconds or more, before finishing like nothing happened.

Please advise!!

P.S.: I shamefully have to admit I never safely remove my hardware. Click to expand...

Although I've had the same happen on my downloads, this "P.S.: I shamefully have to admit I never safely remove my hardware." could be part of the problem, good luck.
 

http://www.techspot.com/community/topics/copying-to-from-flash-drives-stuck-on-5-seconds-remaining-for-30-sec-before-finishing.207001/
Relevancy 24.08%

Hi all Apologies in advance for such a long post I headaches + installation = hardware New Win7 don t know if I just have a corrupt New hardware + Win7 installation = headaches Windows Ultimate installation or what but this all started three weeks ago or so after installing new hardware specifically New hardware + Win7 installation = headaches motherboard Asus A M-A New hardware + Win7 installation = headaches processor AMD A K and RAM Kingston HyperX GB DDR Since I had the extra RAM slot I also put in one of the Aeneon XTune GB DDR I have from before the upgrade The sticker on it says it s but it shows up in BIOS POST as Since then I ve had the following problems Internet Unable to establish any connection at all when using the ethernet cable plugged into my Cisco Linksys EA Router I can connect wirelessly but that connection is lousy and I m not sure why especially since the router is only about feet from the computer To be fair the lousy wireless connection is something I was dealing with since before the hardware upgrade Windows reinstall which is why I finally gave up and bought a ethernet cable the computer used to be in a different room though on the same floor of the house The problem with being unable to get any type of connection when plugged in started after reinstalling Windows and then doing something like updates and then moving the PC to the new spot I made a point of moving the tower myself just so that I could be sure nothing happened to it so I know there was no physical damage done because of dropping or otherwise banging it around at all I ve checked the ethernet cable that runs from the modem to the router as well as the one and neither of them appear to be damaged at all I ve also tried plugging the one into all of the ports on the back of the router in the event that one of them just bit the dust somehow but nothing changed Any thoughts on how I can either get my wired connection working again or what might be making the wireless connection so horrible For clarification on quot horrible quot I m not talking dial-up speeds but some sites either load slowly or not at all sites that load up just fine on every other device in the house - specifically cell phones and iPod an Xbox a Wii and a laptop My connection to Battle net for playing WoW Starcraft II Diablo III is also pretty lag-tastic My NIC is an onboard Realtek GR PCIe Gigabit LAN controller according to the motherboard manual In terms of anything that may be interfering with the wireless signal there s a metal support post and a metal I-beam a few feet from where the router currently sits though it was previously or so feet from both Other than being in close proximity to those the room is wide open I was told that water can interfere with a wireless signal and we do have a lot of ground water under around the house can anyone verify whether ground water can degrade the signal so much over such a relatively small space Hard drive partition issues Until the upgrade when the computer just wouldn t boot presumably because Windows couldn t handle dealing with such big hardware changes all at once I had Windows installed on a partition on a TB Western Digital drive Since I had to reinstall anyway I installed Windows to a partition on a smaller but faster TB Seagate drive Up until this afternoon when I installed Seagate Discwizard one of the partitions on the big drive was inaccessible showing up in disk management and a couple of rd-party hard drive utility partitioning programs as simply quot unallocated space quot Since this afternoon though that partition is now showing up as a completely separate hard drive in disk management AND as quot unallocated space quot on the drive it s actually a part of I m a little leery of just leaving things as they are and using that partition since it s showing up different ways Discwizard only shows that partition as a separate drive there is no quot unallocated space quot showing on the TB drive Is this something I sh... Read more

A:New hardware + Win7 installation = headaches

Update: Wired connection issue is fixed. I have to (sheepishly) admit that I completely forgot to install the router via the CD that came with it. The lousy wireless performance is still a problem, though, as well as the hard drive/partition issues.
 

http://www.techspot.com/community/topics/new-hardware-win7-installation-headaches.206345/
Relevancy 24.94%

Now I know this question has been asked quite a few times but the results always vary and it appears really dependent on the hw So Recently I have been hearing an interrupted high pitched whistle from the case It is not too loud but interrupts when pitched High whistle PC coming from somewhere I need to ex read High pitched whistle coming somewhere from PC something and concentrate It is not a singular long beep High pitched whistle coming somewhere from PC but series of small beeps When I opened the case I tried to High pitched whistle coming somewhere from PC listen where it goes from it does not appear to whistle from the electric source and CPU Graphics Net card Motherboard are too close to each other to properly determine I tried to listen with a straw but it always appears to emanate from someplace else when using this method I tried to dust everything firm the screws nothing helped The issue started about two or three weeks back I purchased the PC about a year ago and the user have not reported anything similar the last change was adding a new CPU fan about four months ago The Rig Mobo ASUS M N -AM SLV CPU AMD Phenom tm II X T Processor CPU Fan Coolermaster Hyper Evo Ram x GB PC AM Vga AMD Radeon FDD in apacer sln HDD seagate GB sln E C Cdrom DVDRW LG sln Advice very much appreciated nbsp

A:High pitched whistle coming somewhere from PC

That noise could be either:

FAN
HDD
PSU

Is this system OC = overclocked?
 

http://www.techspot.com/community/topics/high-pitched-whistle-coming-somewhere-from-pc.206833/
Relevancy 25.8%

Please help.. Can't connect to the wifi but using ethernet is working fine.. My phone could connect to the same wifi though
tried to backread some of the threads but didn't work on my laptop
 

A:Cannot "fully" connect to wifi but works fine on ethernet

Additional info. I am using Atheros AR5006EXS Wireless Network Adapter
and I did deleted the driver and it installed again automatically, but sadly it still doesn't work
 

http://www.techspot.com/community/topics/cannot-fully-connect-to-wifi-but-works-fine-on-ethernet.206650/
Relevancy 23.65%

There use to be an official site where one could buy the Alpha Shield but I can't find it anymore. Does anyone know what became of this product or if it's useful? I've only heard good things about it.
 

A:Whatever happened to the Alpha Shield hardware firewall?

Jskid, I just ran across your question (on Oct.28, 2014!) I bought one in 2004...it worked well until three years later when we moved to the Niagara Peninsula, at which time the unit simply cut all access to the Net. A tech tried it, and said "Toss it." A rather expensive lesson.
Brian, sadder/poorer/wiser.
 

http://www.techspot.com/community/topics/whatever-happened-to-the-alpha-shield-hardware-firewall.166371/
Relevancy 25.37%

I've been having an issue which started this morning. The previous night, I forgot to plug in my Dell Inspiron N5050 after using it. I woke up to find that my battery had died (obviously). I plugged in the laptop, running Windows 7 HE 64 bit, and turned it on. It booted normally and I was able to do all of my tasks as needed. Then I noticed my problem. The battery icon down on the taskbar showed that the device was plugged in, but was not charging. It has stayed at a constant 2% charge for more than 24 hours now. The Battery Meter stated that my battery is performing normally, so I ruled the battery out as the cause. The adapter I am using is the default one that came with the laptop when I bought it, and it appears to be functioning normally as well. What could be the cause of this incident, and what can I do to fix it?
 

A:Battery Stated as "Plugged in, Not Charging"

Most likely you have a bad battery. Dell has had whole series of batteries that they shipped out in a not fully functional state. I have an HP laptop (about 8 years old now) that the battery took a "steamy one" and it will no longer charge properly. You can try this trick (it may not work, but worth a try because did work for me a couple times): power down laptop and take the battery out for 30 minutes; replace battery and plug in charger but do not power on; wait 4 hours of charge and power on. I had it work a couple times that it gave a full 100% charge. Again, if it doesn't work then sorry, but at least you tried.
 

http://www.techspot.com/community/topics/battery-stated-as-plugged-in-not-charging.203683/
Relevancy 24.94%

I used RV042 10/100 4-Port VPN Router. I've configured the dual WAN, and enable Load Balancing for faster internet. But if I accessedhttp://ipchicken.com/ my IP Address is always chaging? How can I setup the router sticking to just one IP address?
 

A:How to "Load Balance" without changing the IP?

Let me preface by saying....taking two circuits and using them at the same time, even with protocol management from the LB is most likely not worth the effort.

But for the sake of the argument, the first hurdle you have is that both circuits need to have static IPs. What type of connections are they?
 

http://www.techspot.com/community/topics/how-to-load-balance-without-changing-the-ip.205897/
Relevancy 20.21%

I am getting a clicking noise, but it is purely audio based, I have razer kraken pro 7.1's, and a stereo with a headphone jack conector and the harman Kardon speakers that came on my laptop. No matter which audio out put I choose, it still makes this almost metronome clicking.
I checked a lot of different settings, but cant find anything wrong?
Does anyone have any ideas what it is?
Please let me know if you have had or are having a similar problem.

Thanks
 

A:My Toshiba is making a clicking noise through audio out put

Could be a failing hard drive...
 

http://www.techspot.com/community/topics/my-toshiba-is-making-a-clicking-noise-through-audio-out-put.205782/
Relevancy 23.22%

24x7 - Low Power Consumption ? Internet Download Machine

I want to build a System that has LOW POWER Consumption.

Use:

Mostly Downloading Stuffs , Might Host Own Cloud too , Email Clients , IRC Clients , Other Internet Connected Apps

I was thinking of a Kabini System

Athlon 5350 (25 W TDP) & Some AM1 Mother Board

http://products.amd.com/en-us/DesktopAPUDetail.aspx?id=105

Again I was thinking about the Intel G3258 Anniversary edition processor (But it has Much Larger TDP)

It should be A Windows 7 Machine . Not Linux or other what nots !

But I am Here for some Advice. I already told you my requirements.

Advise me - What should I do ?
I only want to buy

Processor + Motherboard + RAM

&

SMPS (PSU) + HDD

I have the rest
 

A:Hardware Suggestions - 24x7 - Low Power Consumption Internet Connected PC

Hmm; Why is power consumption a hi priority issue - - are you running off a solar powered system or portable generator?
 

http://www.techspot.com/community/topics/hardware-suggestions-24x7-low-power-consumption-internet-connected-pc.205627/
Relevancy 19.78%

Hi can any one help I cant hear any sound on my laptop its all turned up but when I conect it to my tv the volumes fine but soon as I disconnet from the tv the sound ont go.
 

A:Audio wont work on asus x53u laptop

Did you fix this?
 

http://www.techspot.com/community/topics/audio-wont-work-on-asus-x53u-laptop.204577/
Relevancy 25.8%

Hello guys,
I built myself a new PC and it is pretty loud so I am worried I didn't made a good seal between thermal paste and a CPU, I use a stock AMD cooler and the CPU is AMD Athlon X4 760K, no overclocking.
Max temperatures that my BIOS showed was I think 69°C-71°C.
Should I be worried and should I replace thermal paste or it's all OK?
Thanks in advance.
 

A:High temperatures on AMD CPU?

That seems a bit hot. AMD recommends that the 760K stay below 74C and you are approaching that point. I would recommend putting $35 into a Hyper 212 Evo. that will ensure cool temps on the cheap.
 

http://www.techspot.com/community/topics/high-temperatures-on-amd-cpu.205049/
Relevancy 17.63%

Dell is releasing a new 5K monitor in Q4 this year. That's your ideal 2560 x 1440 quadrupled for retina effect, while keeping the perfect proportions, with the software that supports it that is, for the total of 5120 x 2880 madness.
 

A:Dell 27" 5K Monitor

VitalyT said:





Dell is releasing a new 5K monitor in Q4 this year. That's your ideal 2560 x 1440 quadrupled for retina effect, while keeping the perfect proportions, with the software that supports it that is, for the total of 5120 x 2880 madness.Click to expand...

And I thought 4K was crazy high resolution already xD.
 

http://www.techspot.com/community/topics/dell-27-5k-monitor.205015/
Relevancy 25.8%

Hi guys
lately I changed my windows from 7 ultimate to another 7 ultimate
then my hell started ... my CPU Usages just jump high with out any reason ... when no program running it jump to 15% ... browser take more than it should take ... and if I open any online game it jump to 70-80% which should not happen I used to open all things I want at once and have near 20% cpu usages
I tryed every think closed back gorund programs and scan for virus or malwares I tried a lot of things but still nothing no change still high ...
how can I fix this ?!!!!
 

A:High CPU Usage

Hello, can you post your full system specifications? Also, are you sure this new Windows 7 copy is legitimate and not pirated?
 

http://www.techspot.com/community/topics/high-cpu-usage.204817/
Relevancy 24.08%

Hi, when I typed " dxdiag " it said n/a, last time I checked there was something written in it..
 

A:When I typed " dxdiag " it said n/a

Check your graphics drivers and install the latest one.
 

http://www.techspot.com/community/topics/when-i-typed-dxdiag-it-said-n-a.204746/
Relevancy 20.64%

"No Audio Device" is the message I get when I try to adjust the volume from my "Start" button. I have an old Dell-Optiplex270 running Windows XP with an external speaker unit. I have "RealTech Audio Device" and VLC" Media Player. I read where I need to download "SoundMAX". Help!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!1
 

http://www.techspot.com/community/topics/no-audio-device.204166/
Relevancy 17.63%

My sister's 13" MBP (2011) died a few hours ago. According to what she told me, she was using it, and then, poof, black screen and no power. She doesn't have the cash at the moment to have it properly checked by a tech, so I did a basic troubleshoot in an attempt to narrow things down.

While the internals are a bit dirty, I didn't see any obvious signs of physical damage (it was relevant to check for this). Furthermore, the machine doesn't seem to respond to any power sources. I tried a couple different power cables and, while the little amber light on the magsafe (sp?) tab will come on briefly, the computer with neither power on nor display a charge on the built-in charge indicator. I will also note that the machine failed while disconnected from an outlet source with a full battery indicated.

My initial conclusions are a) the computer fried itself or b) the battery is toast. Any suggestions?
 

A:2011 MBP 13" Won't Power Up

If no one here can offer any insight, I would post this to the Apple discussion forum. There are usually people there that can diagnose this from just a description so that is your best bet.
 

http://www.techspot.com/community/topics/2011-mbp-13-wont-power-up.204013/
Relevancy 17.2%

I'm wondering whether I can overclock my ASUS R500VD notebook it has an INTEL sandy bridge core I5 3210M 2.50 GHz processor 4GB (max 8) of ram running puppy linux and windows xp home edition SP2 32 bit I have benchmarked it and ill email the results to anyone who replys and gives me their email and if you're wondering why I'm running windows xp read my article in the Alternative OS section of the forums called "If all else is too hard try puppy linux" bye
 

A:Can I overclock my asus notebook 17"

Nope sorry, the I5 3210M isn't OC enabled.
 

http://www.techspot.com/community/topics/can-i-overclock-my-asus-notebook-17.202019/
Relevancy 17.63%

Hi all,
I have an Acer Aspire Z5610 AIO computer.When I first bought it a few years back the @ and " were transposed.Hit the @ and " would come up and vice versa.At the time I contacted someone (can't remember who) and with their advice I was able to correct the problem.Due to age the PC was running v.slowly,painfully so.I decide to revert back to Factory default settings,unwisely it turns out,but the old problem of @ and " transposition is back.Has anyone out there got a solution to this problem.It is fixable as I have done it before,but how !!!
Thanks in advance,
Frank.
 

A:Keyboard @ and" are transposed

It's not really a problem particularly as you know which keys to press to get @ or ". This is one of the few differences between UK and US keyboard layouts. You can change the English language version from one of the options in Control Panel.
 

http://www.techspot.com/community/topics/keyboard-and-are-transposed.203000/
Relevancy 23.65%

Hi new to the forum and newbie-level in knowledge with handling for Safety and art junk in storing hardware hardware So sorry for how my questions sound Also I didn t know where else to put this I d just found out that computers have toxic parts and am just wondering I have some old laptops and parts Safety in storing and handling hardware for junk art flash drives hard drives etc Are the levels of these metals in a few - flash drives laptops and hard drives high enough to be Safety in storing and handling hardware for junk art considered toxic Anything else I should watch out for I want to store a bunch of old computers laptops flash drives and hard drives from old laptops until I get the time to sort them out to resell them but I live in the tropics and don t know how to store them properly Should I be worried about heat And I held and will hold internal parts the internal hard drives taken out of old laptops barehanded--is Safety in storing and handling hardware for junk art that okay Or it s not dangerous unless they re broken up Is there a difference between internal hard drives and the internal parts of flash drives I admit I m also thinking of making money off of the laptops flash drives and parts by uh trying art I admit I m not an artist but I m thinking of taking that up as a hobby and yes additional income source in case the reselling doesn t work I know of someone who does something related with internal parts of old computers we re not close so I got the idea there Is this idea viable for me And if it can be done anything I have to watch out for Any precautions I have to take Can I for instance paint on or glue them will the paint or glue affect anything Which parts--the green board the black chips anything else my amateur mind hasn t picked up Drill holes or cut them anything--green board black chips etc via scissors knife to make a picture frame Christmas tree decor or a keychain If I make a keychain for instance will I have to watch what kind of material for the hook I should pick out Is it dangerous if I use a hammer to dismantle a flash drive I don t know how else to pry open the casing Can I do all of this barehanded About heat my only storage option is prone to getting hot I admit I am more worried about say the metal getting hot enough to release fumes and the like than about whether the parts get too damaged to work properly Would heat do that nbsp

A:Safety in storing and handling hardware for junk art

I've never heard of this problem, but I suppose if lead-based solder was used, it could give off fumes. I'm not an expert in the field, but I have all kinds of old hardware parts that I've stored, dismantled, used, handled, melted, painted, what have you... never had any issues. Battery packs from laptops might be of concern though. They can fail and vent, resulting in fire or leakage of bad juju. Best toss them or store them properly (this you would have to research).
 

http://www.techspot.com/community/topics/safety-in-storing-and-handling-hardware-for-junk-art.201627/
Relevancy 24.08%

Hey everyone I own the Acer Aspire G- and I ve had it for a little over two years now One 5552G-7641 Aspire with Temperatures Acer Extremely High of the main problems I have with it is its temperature Right now when all I have open Extremely High Temperatures with Acer Aspire 5552G-7641 is Firefox and iTunes the temperature according to Speedfan is as follows HD C Temp C GPU C Core C I have the rear of my laptop suspended about cm in the air by putting two bottle caps in the rear corners This is an attempt to promote better cooling When I play video games it overheats to the point that the laptop shuts off automatically I understand that the majority of overheating issues is not cleaning enough And indeed I have never cleaned my laptop before However opening the laptop or bringing it to a tech-guy is not really an option at the moment I have read on many forums that using compressed air is efficient but I have also read that it can be extremely dangerous on laptops because of water moisture Also they seem to only pertain to desktops With that said I am here to ask for advice as to what to do with this thing The only ventilation hole is on the left of the laptop and takes up about of the side If any additional information is needed I will gladly provide it Thank you nbsp

A:Extremely High Temperatures with Acer Aspire 5552G-7641

Speedfan is not accurate 95% of the time. Tell me the readings using Realtemp: http://www.techpowerup.com/realtemp/.
 

http://www.techspot.com/community/topics/extremely-high-temperatures-with-acer-aspire-5552g-7641.192887/
Relevancy 19.78%

So I have windows 7 installed on my pc ..... I cant hear any sound from my headphones or speakers whether plugged into the front or rear panel. and also windows shows that there are headphones plugged into the front panel. maybe that's the reason I cant hear any sound....but I tried all possible ways....also disconnected the front panel from the motherboard but still it says its connected.
 

A:Front audio jack panel wont disconnect in any way

Have you checked out the Sound section in Control Panel. Also check Device Manager.
 

http://www.techspot.com/community/topics/front-audio-jack-panel-wont-disconnect-in-any-way.202869/
Relevancy 20.64%

Hello, im using

Windows 7 64bit
Motherboard Name Intel Whitesburg DP55WB
Realtek ALC888/1200 @ Intel Ibex Peak PCH - High Definition Audio Controller [B-2] PCI
Headphones steelseries syberia v2 - 3.5mm jack

this is integrated sound card

so my problem is, what not working balance. then I press test, the sound must come from left to right ear, but it comes from both always, even I do all volume on right ear it anyway plays on both sides.
Even I delete driver, on default win7 driver remains same problem.
I tried to use earbuds, another headphones still same.

now im thinking just buy sound card to solve problem
 

A:Audio problem

I solved, so problem was my razor black widow keyboard it has 3.5mm jacks, so my headphones plug dont stick full.
im so shocked how razor failed
 

http://www.techspot.com/community/topics/audio-problem.202664/
Relevancy 17.63%

My laptop had headphones plugged in because I was watching a film but while I was in another room my laptop was knocked onto the floor around - ft drop change mic to a HD audio headphones Realtek port? port a manager, landing on the headphones jack the wire is fine but the ports completely broken I can see cracks and its loose and everything The laptop has Realtek HD audio manager and in my experience of this program on other desktops I ve had I was able to change Realtek HD audio manager, change a mic port to a headphones port? what port does what My laptop only has a headphones port and Realtek HD audio manager, change a mic port to a headphones port? a mic port and I would like to see if I can switch the mic port to be the headphones port because I never use an external mic however in Realteks audio manager I can t find out how to do this In pictures I ve seen on the internet there is a quot Device Advanced Settings quot button as seen in this picture http www vistax com attachments ealtek-hd-audio-driver-version-hd manager jpg but my program doesn t have this Do I need to download a newer version of the software or is it just not possible to change my mic port to be my headphone port I dont mind if I have to use third party software I just want it to tide me over till I can get it sent away Thanks for suggestions greatly appretiated nbsp

A:Realtek HD audio manager, change a mic port to a headphones port?

I doubt very much if this will be possible. The mic and headphone ports are wired directly to the Audio section of the motherboard, there connections cannot be altered.

Your best bet is to get the damaged port repaired.
 

http://www.techspot.com/community/topics/realtek-hd-audio-manager-change-a-mic-port-to-a-headphones-port.166497/
Relevancy 29.24%

Hello
I have an Acer E1-571 suddenly I have an X on my audio controller icon on home page and no audio devices in control panel. I have tried installing sound video and gaming controllers and then tried to install update but it says best already installed and still no Audio.
Any and all help greafully appreciated and many thanks in advance
 

A:Audio Disabled no audio devices windows 8

Look for audio drivers on the motherboard CD delivered to when after purchasing your system. If you can't find it or don't have mobo CD around, navigate to manufacturer website and download driver for audio device from there.

Good luck!!
 

http://www.techspot.com/community/topics/audio-disabled-no-audio-devices-windows-8.202541/
Relevancy 20.64%

I was not sure on what board to post this.
When running Windows XP on my older computer I could play an enhanced CD that besides a full tack of music I would also see really nice graphics in the beginning where I could make selections to see maps and different info.
Now that I am running Windows 7 I only have the option of hearing the music.
Any ideas as to what the problem may be?
 

http://www.techspot.com/community/topics/enhanced-audio-cd-problem.202328/
Relevancy 17.63%

Hi, my relatively new "HP ENVY TouchSmart m7 Notebook PC" has been having crippling lag while playing video games. The lag slows the computer down to about 0.2-0.5 frames per second, and slows the audio down to match the video speed (which produces a grinding sound). This lag happens every 10-45 seconds depending on how long the computer has been running. Some help would be appreciated.
 

A:Grinding audio/video lag during video games (CPU related?)

What antivirus program are you using? Is the notebook fully updated using Windows Update? Are you running Windows 8.1?
 

http://www.techspot.com/community/topics/grinding-audio-video-lag-during-video-games-cpu-related.201939/
Relevancy 22.36%

I just bought a

Amd A6 6400k apu

ecs a55f2-m4 motherboard

kingston hyperx 4gb 1600 ram

and I installed all drivers but even when I try to open solitaire it says no suitable graphics device found.
 

A:No suitable graphics device found

Which graphics driver and version did you install?

AMD Catalyst 14.4

32-bit Catalyst Software Suite
64-bit Catalyst Software Suite

 

http://www.techspot.com/community/topics/no-suitable-graphics-device-found.202170/
Relevancy 25.8%

Hi I have an older PC which I gave to my mum It originally ran Vista but I bought and installed Windows Ultimate around weeks ago after it had been inactive for months It was running great but a couple of weeks ago it just started hanging for no real reason Also at startup it would say that the computer had not been shut down properly even if it had This was only when it was switched off at the wall not after checksum defaults loaded" replaced error battery after - "cmos a restart or when the PC was left plugged in and switched on She only "cmos checksum error - defaults loaded" after battery replaced uses the PC to look at You Tube and some webcams from her grandkids and that s it she s not very computer literate Initially I left Windows repair to run overnight but when I looked at it the following morning it was still in the repair screen so I assume it had hung I spoke to a local repair shop and they suggested I test the RAM test the hard drive and replace the CMOS battery The RAM and hard drive checks went without any errors and after I replaced the battery the hanging stopped I played with the computer all evening and shut it down as normal and switched it off at the wall Next day I thought I would start it up just to check it and I was faced with a quot cmos checksum error - defaults loaded quot message I thought that was strange but maybe the battery was dead so I swapped it over with one from my perfectly working desktop to try it out and my desktop worked fine but after shutting down my mum s one it had the same problem when power was pulled So battery was ruled out Incidentally I will say that I reset the BIOS date and time every time I was faced with the error following up with a save and exit It worked fine until I unplugged the computer I then moved on to the BIOS and set it back to default and the same again After this opened the case and used the jumpers to reset the BIOS to default again but no difference My mum will not leave it switched on at the wall constantly in case it self-combusts same with her washing machine TV lamps etc otherwise I would just do that and ignore it Is there anything else someone can suggest that I try System Shop bought by Mesh Motherboard is an ASUS PSN-E SLI gb Ram - samsung gb hard drive - ASUS Thanks for any help nbsp

A:"cmos checksum error - defaults loaded" after battery replaced

I must add that the PC is the same as when I bought it new from the shop, except for adding a Creative Labs sound card (approx 2012) and installing Windows 7 (around 6 weeks ago). All Windows updates are downloaded and installed.
 

http://www.techspot.com/community/topics/cmos-checksum-error-defaults-loaded-after-battery-replaced.201304/
Relevancy 25.37%

My dell 1905fp finally crashed after a lot of years. I'm not a gamer, but I was very happy with that monitor.

Of course they no longer make it, and I understand refurbished monitors of this type are not necessarily a good option.

I can't seem to find reviews or comparisons which point the way to other similar monitors. I'm retired and just can't afford the $600 and way up price of what I've seen so far.

I just need a basic monitor with VGA and DVI, but would like the screen performance to be decent, incl for watching movies etc.

Any recommendations, and where to get a reasonable price? Again, don't want a wide screen.

Thanks much!
 

A:Reasonably priced 19" or 20" monitor, not wide-screen?

Nothing wrong with buying refurbs. They may have a few blemishes in the frame but nothing serious to keep them from functioning. I've bought a few myself and have had no issues with them. Although the monitors I bought were 20" widescreens that averaged $120 or less. For what you need/want, I wouldn't spend more than $150.

I know you said no widescreen, but movies do view better on widescreen.

http://www.amazon.com/Dell-UltraSharp-1905FP-Rotating-Landscape/dp/B00091R6KC - less than $100
 

http://www.techspot.com/community/topics/reasonably-priced-19-or-20-monitor-not-wide-screen.201641/
Relevancy 24.51%

Hello folks. I'm from Brazil. I would like to know if there is a good place to buy Computer parts and Gaming Laptop in Toronto. I'm going to Toronto soon and I'll study English at King George International College (150 Eglinton E. Toronto, ON M4P 1E8). Is there a Computer Store near from KGIC?

Thanks.
 

A:Where can I buy hardware in Toronto?

You can order parts from Newegg.ca or Amazon.ca and send them to your dorm room. As for hardware stores, I think a store called Frys is big in Canada.
 

http://www.techspot.com/community/topics/where-can-i-buy-hardware-in-toronto.192343/
Relevancy 20.64%

I accidentally deleted IDT audio from the contol panel. Because of this, the audio is not working. Therefore, I tried downloading it again but my laptop responded with [error, declined, your computer does not reach the requirement ect]
Just to clarify I have a hp laptop windows 7.
 

A:Audio is not working

It could be the driver you downloaded not compatible to your system.... are you using 32bit or 64bit? if you are using 32bit then download only driver for your audio according to their compatibility..likewise in 64bit..
 

http://www.techspot.com/community/topics/audio-is-not-working.201819/
Relevancy 16.34%

I have networked PCs before many times successfully so this is not my first time trying to network PCs in a home environment Though I m wondering if Windows is part of the problem I would have thought that for sure until one of the name credentials bad password? user with unknown even correct failure: or "Logon new laptops running W would not connect to any of the other three PCs Laptops running W Yet these other three W PCs Laptops CAN connect to this laptop Then it gets a little more "Logon failure: unknown user name or bad password? even with correct credentials interesting this same laptop that couldn t connect to those three W PCs Laptops CAN connect to a Windows desktop and a XP Laptop and those two can also connect back to it without issue It s almost like my network is divided in half and only half can talk to each other But then when I thought it couldn t get any more interesting I realized the first three W PCs Laptops can talk to the others it s just that the others W Laptop W Desktop XP Laptop can t talk back to them without getting the error quot Logon failure unknown user name or bad password even though the username and password are correct I don t fully understand this error because on the surface it s just WRONG My username and password are correct but it appears something somewhere is interfering or hijacking the authentication process Three of the computers laptops are brand new just purchased last week and setup this week The HostPC is also fairly new just purchased last month I am not using a HomeGroup and have removed all computers that were part of a HomeGroup I have enabled file sharing and network discovery and enabled Use user accounts and passwords to connect to other computers on all PCs I have DSL and am using the wireless modem provided by my ISP which has router functionality built into it It is a Sagemcom Model F ST N All computers are connected wirelessly Time is correct on all PCs I cannot use Group Policy since they re all Standard or Home edition DHCP is enabled and all computers are on the same subnet using the x range of ip addresses The six computers are as follows I figured this may make is easier to visualize the layout HostPC HP Desktop W PC Name DrsBlend U N DrsBlend p w not showing my real password PC HP Laptop W PC Name DrsBlend- U N DrsBlend P W PC HP Laptop W PC Name DrsBlend- U N DrsBlend P W PC HP Laptop W PC Name DrsBlend- U N DrsBlend P W PC HP Desktop W SP PC Name DrsBlend- U N DrsBlend P W PC Dell Laptop XP SP PC Name DrsBlend- U N DrsBlend P W Every PC stated above has the same user name and password and is logged-in with the username DrsBlend and the password The quot Logon failure unknown user name or bad password happens when trying to access HostPC PC or PC from PC PC or PC The HostPC can see and connect to all the PCs but only PC and PC can talk back or access the HostPC It s like the HostPC and PC and PC are in their own little clique and can talk back and forth to each other Those three PCs can also talk to PC PC and PC as well but PC PC and PC cannot talk back to them HostPC PC PC Profile corruption I would have entertained that thought but the fact the first three PCs can access and talk to one another kind of defeats that idea and the fact the PCs were just recently setup Firewall Disabled and disabled TrendMicro with no change With them on off the first three PCs can still talk to each other and the rest of the PCs Anyone have any additional suggestions nbsp

A:"Logon failure: unknown user name or bad password” even with correct credentials

I experienced a similar problem when I was trying to network my 8.1 machine the host network. As you say the host PC can see and connect to all of the machines, but not the other way around. Not sure if it is the same in your situation but I found that Microsoft's idea of network sharing on the Windows 8 class of OS differs greatly from previous OS's in that you can connect to it from an external host, but when trying to do the other way around it doesn't "see" the PC in question due to differing network sharing protocols included in the OS.

Anyone feel free to correct me if I am wrong, I am speaking only from what happened with my network.
 

http://www.techspot.com/community/topics/logon-failure-unknown-user-name-or-bad-password%E2%80%9D-even-with-correct-credentials.201313/
Relevancy 17.2%

So newegg is offering the Acer 29" B6 B296CLbmlidprz IPS monitor for about 350. Seems like a pretty good deal but I can't find many reviews on it. I was wondering if anybody had any experience with this monitor and/or if you guys have better options for someone who is looking for an IPS monitor below 400 bucks. I want to game with it as well as do some 3d modeling and photoshop work. So I need reasonable response time for gaming. I was also looking at the HP ZR2440w and was gonna get that until I saw this deal on newegg for a larger monitor. 24" models are fine but if there are good deals on some 27" inch ones then I would be interested in those as well. Any suggestions? Thanks.
 

A:Question on Acer 29" monitor and other monitors

Heres the link for that monitor.
http://www.newegg.com/Product/Product.aspx?Item=9SIA24G1GC2421
 

http://www.techspot.com/community/topics/question-on-acer-29-monitor-and-other-monitors.201698/
Relevancy 20.64%

Hello, everybody. Sorry if this is the wrong category.

I've got a relatively new HP Envy 4-1035TX Ultrabook Laptop and I've had this problem lately: while playing a YouTube video or a song from my iTunes library, it keeps slurring and crackling. The problem is very sporadic: sometimes it will not slur at all, but other times it will once every 10 seconds. Playing a video in BS Player works perfectly fine, though.

Thanks in advance.
 

A:Audio and Video slur

What version of Windows are you running? Is Windows fully updated using Windows Update until there are no more updates are found?
 

http://www.techspot.com/community/topics/audio-and-video-slur.192909/
Relevancy 23.65%

Hello

When I play Diablo 3 I get some fps drops , usually at the same places. usually im around 130 FPS but can go down to 50 or even 25 sometimes when its bad. its not unplayable but its no fun at all.

The places are demanding I guess, there is a lot of **** on the screen and action all around.

My current setup :

Nvidia 780Ti HOF , goes to around 60C during load
i5 4570 goes to around 65 during load
8 GB ram,

Im assuming the 780Ti should be able to handle Diablo 3 even when its demanding?

I used an AMD r9 290 earlier and got the same issue at the same places.

Before I changed card from the 290 to 780Ti I formated my computer and installed Windows 8 Pro.

So it shouldnt be any software causing this,

Am I doing something wrong here?

Is it perhaps my CPU?

What can I do?

if you want to I can record the actual gameplay and show you
 

http://www.techspot.com/community/topics/fps-drop-when-playing-diablo-3-something-wrong-with-my-hardware.201463/
Relevancy 24.51%

Hi, I want to know if Motherboard GIGABYTE Z87X-UD3H is suitable with the GPU unit GIGABYTE GV-N65TOC 1GI ??
how to know if that GPU unit will use what kind of PCI port??

thanks guys.
 

A:Help to match the hardware

Yes it will work fine.
 

http://www.techspot.com/community/topics/help-to-match-the-hardware.201306/
Relevancy 20.21%

I recently purchased a Supermicro SuperWorkstation A- and am having problems getting the audio to work I installed Windows Pro and the Motherboard has built in Realtek ALC audio I did install the latest drivers that Supermicro has for the ALC I have one green plug that Supermicro Not Working Audio Workstation runs speakers and subwoofer I have that plugged into the Supermicro Workstation Audio Not Working green plug on the back of the computer In the Realtek HD Audio Manager the SPEAKERS Tab is check as the default device In the SOUND window Speakers are also checked as the Default device When I play some music the green bar moves up and down in the SOUND window and in the VOLUME MIXER window So the speakers have been detected when I plugged them in and it is showing that the built in Audio is working but no sound is coming out Any ideas on this Supermicro may eventually solve this problem but I really want to get on with this using this computer now When I installed the Drivers for the NVIDIA Quadro K Graphics Card it also seems to have installed some NVIDIA High Definition Audio Drivers It doesn t seem to help when I disable them Also I noticed lots of people talking about not seeing the SPEAKERS tab in these forums I was also having that problem The computer seemed to quit detecting when anything was plugged in so the tab never came up I finally figured out how to fix that problem though To get the SPEAKERS Tab to reappear you go to the right had side of the Realtek HD Audio Manager window and click on the little folder icon A CONNECTORS SETTINGS Window pops up and there is a box you can check for Enabling auto popup dialog when device has been plugged in You need to uncheck that box and click OK You then go back to that folder and recheck that box and click OK again The Speakers tab should now appear when you plug in something nbsp

A:Supermicro Workstation Audio Not Working

The next time my computer rebooted the Speakers Tab once again disappeared and there is nothing I can do that will bring it back! *sigh*
 

http://www.techspot.com/community/topics/supermicro-workstation-audio-not-working.201241/
Relevancy 20.21%

Hi. I am looking for a new PC/Laptop mainly for audio editing and some amateur video editing. I have read around the web and found a few things I probably want in on my computer:

Firewire or IEEE 1394 input,
An SSD hard-drive or atleast an 7200rpm hard drive
A half-decent video card for video editing
A decent sized RAM (atleast 8 gb I think)
Processor which isnt a slug probably

I was looking at a refurbished Mac Mini for Ł579. (http://store.apple.com/uk/product/FD388B/A)
It has some good reviews online and since Im not too experienced with computers an Apple product would probably give me less headaches. The Intel HD 4000 isnt too good though, which might be a problem for video editing. The hard drive isn't fast either, but I read, that that can be replaced.
Any comments on this? Maybe I should build my own PC or buy a laptop, could you give me some suggestions as well? My budget is about Ł600-700.
Thanks.
 

http://www.techspot.com/community/topics/advice-on-a-new-rig-for-audio-video-editing.201081/
Relevancy 20.64%

Iam using intel i3motherboard. My audio driver installed perfeftely iam getting no sound from the speakers for whenever I connect my headphone it is showing in realtek audio manager that current connect decvice is ......, so I can say that hardware is also fine but no output to speakers and head phones what should I do? What might be the problem?
 

http://www.techspot.com/community/topics/problem-with-my-audio-output.200731/
Relevancy 20.64%

Hi everyone!

so I was watching a video but then decided to take a break and put my old Dell laptop on hibernate for about a few minutes. when I came back I logged back in played the video back but then there was no sound.

I checked if if I was just on mute. nope. on the audio tray I can see considerable activity on the volume gauge in sync to my video playing.

I tried to connect a headset. still nothing.

I tried connecting to my TV using a HDMI cable.... audio came out of my TV just fine

So I stll was perplexed why I had no audio on my laptop even through the headphone jack

I tried a system restore. still nothing

I tried uninstalling and reinstalling the device.. nothing

restarted multiple times through all of the process...

anyone got any idea whats going on here ?
 

A:No audio coming out from laptop

Have you tried shutting it down normally, let it sit a bit & restart it?
I wouldn't of done the system resore, but....
 

http://www.techspot.com/community/topics/no-audio-coming-out-from-laptop.200646/
Relevancy 25.8%

I just got new SSD - Transcend 128GB. Installed Windows. When I cold boot my PC -- from a shut off state -- I get this message before Windows loads: "Reboot and select proper boot device or insert boot media in selected boot device and press a key."

However, if I press Ctrl+Alt+Delete and reboot I come into Windows.

If I enter BIOS from cold boot, it does not detect my SSD. After rebooting it detects my SSD. Seems like the SSD is slow at firing up?

I have run chkdsk and memory test without any errors.

My motherboard is the MSI Z87-G55.
 

A:"Reboot and select proper boot device"

Just installed newest BIOS, it didn't help.

When I go into Board Explorer in BIOS it says SATA port 1 is empty. After reboot it says the same port is occupied by my SSD.

Update: Plugged in another hard drive (non-SSD). Same rules apply to it. On cold boot, none of the drives are detected. After reboot, both drives are detected. I used a non-SSD as system drive before this, worked perfectly.
 

http://www.techspot.com/community/topics/reboot-and-select-proper-boot-device.200351/
Relevancy 24.51%

I am building a new system for editing/rendering and have two options currently - any comments, critiques are welcome
option 1
core i7 4770 3.4GHZ quad core processor
MSI Motherboard with 4 memory slots, USB 3.0 and all of the goodies
32 GB of corsaire 1600 RAM
120GB solid state hard drive
3TB mechanical hard drive
2GB dedicated graphics card XFX R7-260x
Noctua CPU cooler with 2 fans

or Option 2
CPU: Intel Core i7-4770K 3.5GHz Quad-Core Processor
CPU Cooler:Noctua NH-U14S 55.0 CFM CPU Cooler
Motherboard: Gigabyte GA-Z87X-UD3H ATX LGA1150 Motherboard
Memory: Corsair Vengeance Pro 16GB (2 x 8GB) DDR3-1600 Memory
Storage: Samsung 840 EVO 120GB 2.5" Solid State Disk
Storage: Seagate Barracuda 2TB 3.5" 7200RPM Internal Hard Drive
Video Card: Asus GeForce GTX 660 2GB Video Card
Case: NZXT Phantom 530 CA-PH530-B1 Black ATX Full Tower Case
Case Fan: Noctua NF-F12 PWM 55.0 CFM 120mm Fan X4
Case Fan: Noctua NF-A15 PWM 140mm Fan
Case Fan: Noctua NF-A14 PWM 82.5 CFM 140mm Fan
Power Supply: Corsair CX 500W 80+ Bronze Certified Semi-Modular ATX Power Supply
Optical Drive: Asus DRW-24B1ST/BLK/B/AS DVD/CD Writer
 

A:Please critique my hardware

jeff young said:





I am building a new system for editing/rendering and have two options currently - any comments, critiques are welcome
option 1
core i7 4770 3.4GHZ quad core processor
MSI Motherboard with 4 memory slots, USB 3.0 and all of the goodies
32 GB of corsaire 1600 RAM
120GB solid state hard drive
3TB mechanical hard drive
2GB dedicated graphics card XFX R7-260x
Noctua CPU cooler with 2 fans

or Option 2
CPU: Intel Core i7-4770K 3.5GHz Quad-Core Processor
CPU Cooler:Noctua NH-U14S 55.0 CFM CPU Cooler
Motherboard: Gigabyte GA-Z87X-UD3H ATX LGA1150 Motherboard
Memory: Corsair Vengeance Pro 16GB (2 x 8GB) DDR3-1600 Memory
Storage: Samsung 840 EVO 120GB 2.5" Solid State Disk
Storage: Seagate Barracuda 2TB 3.5" 7200RPM Internal Hard Drive
Video Card: Asus GeForce GTX 660 2GB Video Card
Case: NZXT Phantom 530 CA-PH530-B1 Black ATX Full Tower Case
Case Fan: Noctua NF-F12 PWM 55.0 CFM 120mm Fan X4
Case Fan: Noctua NF-A15 PWM 140mm Fan
Case Fan: Noctua NF-A14 PWM 82.5 CFM 140mm Fan
Power Supply: Corsair CX 500W 80+ Bronze Certified Semi-Modular ATX Power Supply
Optical Drive: Asus DRW-24B1ST/BLK/B/AS DVD/CD WriterClick to expand...

Well your first option does not have much information on it so based off the two sets of specs alone I would say go with your second option since your mostly doing editing.

However, what program are you useing for video editing might I ask? If you are using Adobe, I would definitly go with an AMD card since Adobe likes OpenCL and AMD cards are better at OpenCL than Nvidia.

I would say your selections for the second are quite nice, just swap the 660 for something like this and you will be good if your using Adobe.

Also, I would jump your PSU up to a 600 watt if your going with this setup. 500 Would be to close to the bare minimum and for last-ability I would go with a 600 or 650 watt minimum to keep the system open for overclocking and to insure overworking the PSU is not an issue.
 

http://www.techspot.com/community/topics/please-critique-my-hardware.200093/
Relevancy 25.37%

Hi,

I reviewed the forum but could not find exactly what I was looking for. I am a computer user not a builder. I am considering a high end Mac
3.5GHz Quad-core Intel Core i7, Turbo Boost up to 3.9GHz
32GB 1600MHz DDR3 SDRAM - 4X8GB
3TB Fusion Drive
NVIDIA GeForce GTX 780M 4GB GDDR5
This is like $3.3k USD. Will I get as much out of this as say a high end alien ware desktop? I am a geezer and prefer the Mac for the all in one design and aesthetics. I usually keep my Mac's for about 5 years then get a new one. Given I'm not price sensitive and my concerns, will I get as good a gaming experience on this as I would a high end gaming PC?

Thanks
 

A:High-end Mac versus gaming PC

The higher resolution of the iMac will mean you definitely won't be able to max out all games. Also, there's not many games to start with - Steam is probably your best resource here.

I, along with anyone else here, cannot recommend an iMac for you, unless:
- You desperately need OSX.
- You need an All-in-one form factor for some unknown reason.

$3.3K is laughably-high, and more than enough to buy parts and pay someone to build it for you. For comparison, $800 parts (<$1000 including building fee) will demolish the above iMac in gaming.
 

http://www.techspot.com/community/topics/high-end-mac-versus-gaming-pc.200069/
Relevancy 17.2%

Recently my network storage device has stopped me from accessing folders with the exception of music. All my pictures for the last 11 years are on it and not backed up anywhere else. Cannot find manual and have done reset but cannot remember URL to setup or admin username and password. Doesn't seem to be online and Edge is giving me no help whatsoever.
 

A:Edge DiskGo 3.5" network harddrive

Ouch if this is a NAS Device or has an IP you can use an app called FIng for your mobile device to find its ip so you can put it in the browser and get to the gui site. If you cant try fing you can use angry ip scanner for winwdows to find its ip.

If you want to try and recover files I would try recuva to obtain any data that has been lost. I am not sure if it is lost or just changed in the mapping.

As most guys will tell you here its very good idea to have three forms of back up. Local, external and online. If you don t know how to use fing or any of the software I duscusses please let me know. I will have links to the downloads below. Goodluck.

http://angryip.org/w/Download
For Fing just type in Fing in either google play or Itunes.
For Recuva: http://www.piriform.com/recuva/download/standard
 

http://www.techspot.com/community/topics/edge-diskgo-3-5-network-harddrive.200015/
Relevancy 20.64%

After upgrading my MacBook Pro with Maverick, Audio Hijack Pro pretends not finding the source application for recording. Anyone the same problem?
 

http://www.techspot.com/community/topics/audio-hijack-problems.199984/
Relevancy 15.05%

My Hp pavilliin g7 series laptop running windows 7 home starts up with white screen and no beeps or sounds . Started freezing on Hp logo screen last week only sometimes. Id turn off and it would work on second try. About a year and a half ago I used laptop to preview windows 8. And after I reinstalled windows 7 it has been acting funny. Ie freezing and louder fan noise. I did recently update the bios and a pci device driver that never installed. But now it has white screen this morning. I shut off and powered up and still white.
I took off battery and pressed power for 10 sec plugged back in and still white. Still no noise.
Any ideas?
 

A:HP G7 17" screen starts up white and stays white

Try attaching an external monitor and notice what it displays...
 

http://www.techspot.com/community/topics/hp-g7-17-screen-starts-up-white-and-stays-white.199331/
Relevancy 42.14%

Operating System Windows Home Premium A few months ago I had purchased an INSTEN Composite AV Cable for Sony PlayStation and INSTEN mm Stereo to RCA Cable M F Inch Cm Black With these I connected the sound from my PlayStation through the Audio In jack on my computer This allowed for an audio transfer from PlayStation into computer and out the Speaker Jack in the back This has worked fine until February rd On February nd I had changed my W power supply for a W power supply Problem "In Audio Line" That day everything worked perfectly however the next day I heard a "In Line" Audio Problem humming and the sound was messed up I found out the cause was the power supply I changed out the new power supply for my old one Now my audio "In Line" Audio Problem is messed up I hear what sounds like an echo in the sound If I have the speaker volume set to I can hear the sound fine but only in the left speaker Any higher I hear interference and it sounds like it is being muffled The other problem is I can t play any music or sound without the Stereo Cable being plugged in Also the port is being labled as In Line in my Realtek HD Audio Manager If there is anything that I need to add let me know nbsp

http://www.techspot.com/community/topics/in-line-audio-problem.199925/
Relevancy 24.94%

Yes yet another topic seemingly on one that has been asked many times before But this is definitely different The PC Windows enterprise an mdg vxi with dual NICs one is running to science equipment with a static ip - works fine the other connects to the company network well it s supposed to It s not actually on the domain yet because the network path can never be found because of this DNS issue The Issue I can ping any site by it s IP but never by its hostname I cannot load Yet another ping but title hostname" - different "can't any sites though the browser by using the IP the browsers IE lt -- it s our standard browser right now eww Yet another "can't ping hostname" title - but different and firefox although that s not really supposed to be installed cannot load anything According to windows the card is fully connected with internet access We have tried trying different Yet another "can't ping hostname" title - but different NICs as the Yet another "can't ping hostname" title - but different secondary ones removing the secondary and using only the onboard to connect externally giving it a static IP and entering the DNS servers - we ve tried our dns servers as well as googles public ones all cmd commands that I could think of - nbtstat ipconfig flush and reg DNS fixing the host file deleting the TCP IP stack plugged in a laptop just to make sure the port was okay and everything worked I ve pretty much done anything I can think of and anything I ve read online I m sure other things were tried I just can t remember everything I ve done or my team as done as we ve been working on this for over a week on and off I am cisco certified and took network engineering in school I even called in my networking brain trust back home and we couldn t figure this out I m thinking it s something the science company that came in to set up the machine did and I am hoping it doesn t have to be re imaged as they would have to be called back in to setup the machines again Anyone that solves this will be my hero forever nbsp

A:Yet another "can't ping hostname" title - but different

Any luck with this issue?
 

http://www.techspot.com/community/topics/yet-another-cant-ping-hostname-title-but-different.163897/
Relevancy 17.63%

Hi,

My wife is pestering me to buy her a 10" tablet, which she'll use for surfing, watching videos, etc, and I wondered if anyone can please help me decide a good one for her. I never really delved into tablets before, myself being more of a desktop PC person. I decided to get her something Android based because it iPad seems to have its limitations.

What should I look out for when choosing a tablet? What version of Android, processor, CPU, RAM, storage capacity and screen resolution should I be looking for, do they all take SD cards or a means of data transfer, etc. She also wants the option to attach a keyboard to it. With regard to internal storage, I heard it's partitioned on some models so apps can only be installed in one partition and the other is for photos, documents, videos, media, etc; what minimum partiton size should we be looking at for installing apps nowadays. Can anyone recommend any models we should be considering?

Thanks.
 

A:What 10" tablet for my missus?

To make this simple. What Operating System you have on your PC or your wife PC. Should stick to what you have so you already know how to use it on the tablet.

Windows Users get Windows tablet
Surface RT, Pro, 2nd Gen (remember these cost more)
DELL has one for $299 8-inch. You wanted a 10-inch.

Now some Windows users have Android tablets because at the time there was much of choice even though Windows XP Tablet and Windows 7 Tablet options where available. Android tablets were used more.

If your both are on MAC apple get the iPAD 9.7-inch 4:3 ratio tablet. They do have 7-inch again 4:3 ratio tablet.

I have one Windows 7 Ultimate 64-bit dual core 9.7-inch 4:3 ratio tablet. I use the touch pen with mine it's the same one for the iPad. Surface tablets uses digitize pen with 2 AAA batters inside.
 

http://www.techspot.com/community/topics/what-10-tablet-for-my-missus.199527/