I have windows xp sp2 on 80gb harddisk , mother board mercury make,intel processor now this mercury mother borad what i have donot support ddr2 RAM, i had moved harddisk to intel motherboard box.
i am able to detect harddisk and windows apologies to start safe , last good menu and start normally and command prompt appears, i tried all options but fail to start windows xp.
MY IDEA IS AFTER LOGGING INTO WINDOWS , LOAD INTEL MOTHER BOARD DRIVERS.
Pl. find me solution to loginto windows and resume work.
I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.
I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.
You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)
you cant use the same xp on another motherboard.
I have recently somehow disabled my windows key. I have tried going to Microsoft and doing the "Fix it" thing for the registry and it does not work. I have tried this numerous times. Could it possibly be the keyboard I'm using? It use to work however with the same keyboard. I use Avast Anti-Virus, Malwarebytes and iObit system care as my general cleaners. Not sure if any of those have a default setting to disable the button. Thoughts / Suggestions please?!?!
Do you mean Windows is asking you to activate again? What version of Windows are you running?
Box art and pricing for Intel's upcoming Skylake K processors have leaked onto the web ahead of its official launch. Some sellers in Australia are even getting a jumpstart, offering both the Core i5-6600K and the Core i7-6700K as of...
Got tired of waiting and bought 4690k months ago. Giving todays exchange rate, paid exactly $230+VAT. Probably saved some on DDR3 vs DDR4, maybe s1151 MOBOs will be also more expensive on release, while You can buy s1150 on sales and specials. What I don't get is the sentence: 'If so, what CPU are you upgrading from or are you building an entirely new PC from scratch?'? It's not like You can upgrade just Skylake, have to basically build a new PC: CPU, MOBO, RAM. If You play building your PC, rest is usually left over from previous builds.
Power outage due to storm. Came back on without pictures and documents. It's an HP desktop. Would a file recovery program work? I've tried some of the instructions online, but they don't work.
Oh mary; I feel your pain. Were the pics within one folder and now they're ALL missing?
Intel is gearing up to release their next-generation Skylake processors as early as next week, but before they've been able to release any official information, a set of benchmarks detailing the flagship Skylake CPU's performance have leaked onto the web.
No surprises here. Keep Calm and Carry On... Strong dollar and no sensible impovements in IPC, that's gonna be even tougher year for PC manufacturers.
I sometimes wonder about techs using tools such as Seatools, HDD regenerator etc to diagnose/repair hard drives. Do any of these tools beat Chkdsk in any way?
(besides data recovery tools, I guess those have no match in Windows).
IMO, always use the tool provided by the vender. At the time you need this tool, you don't need a 3rd party screw-up to 'help you' really mess it up.
Intel and Micron held a joint press conference earlier today to announce a breakthrough memory technology called 3D Xpoint (pronounced 3D crosspoint) that's up to 1,000 times faster (read speeds) than today's NAND, features 1,000 times better endurance and is...
I hope this really brings about the death of the hard drive. And it can't come soon enough.
Gimme a 1 TB Xpoint SSD that doesn't break the bank and I'm sold.
I have a Soundblaster Z on my PC that was working fine until I upgraded to Windows 10 today. Now the sound still works but sounds like there is hardly any treble at all. It sounds like singers in songs are singing in a tunnel or something. You can't hardly make out what the vocalist is saying over top of the background music.
Can someone please help me fix this!?!?!?!?!
Not yet maybe. According to Creative's website, drivers for Soundblaster Z will be available in August 2015. It doesn't say exactly when though.
Following yesterday's worldwide launch of Windows 10, all three major GPU vendors have released new graphics drivers that support Microsoft's new operating system. If you're upgrading to Windows 10, make sure you download and install these drivers soon after launch.
Is AMD planning to release Windows 10 drivers for RadeonHD234k cards too? Are those machines stuck with Windows 7?
I have a little problem here. I have that intel in my pc right now and I found that pentium in a pc at my father work and now my question is:
Which is better for my pc? My motherboard suport pentium 4 soo I want to know which is better. Thanx.
For the past ten years, Intel has successfully managed to shrink the manufacturing process for their CPUs every two years. However, with each shrink of the process node there are complications to deal with, which is why Intel has announced...
I think this will be better in the long run. maybe amd will play catch up and cpu prices will become more affordable.
I recently used a program Autoruns,, and deleted some startup things I shouldn't have.. Since then I cant connect to internet, the troubleshooter for wireless adapter says the Windows wireless service is not running on this computer (WLAN Autoconfig service) and fails to start the service.
I notice on windows task manager there are only about 13 Processes running and there are usually about 20, and on Services there are about 40 running and about 100 or more stopped services. Thanks for the help
Also on startup now I have a pop up on bottom saying, Failed to connect to a windows service. Windows could not connect to the System Event Notification Service service. This problem prevents standard users from logging on to the system. As an administrative user, you can review the System Event Log for details about why the service didn't respond. And the startup and logon time is really long now
Sounds like you deleted the network drivers, I did this once and ill be honest unless someone here knows a trick, or you have a CD with drivers you are going to have to have a hell of a time unless you know the name of the hardware and download the right driver, thats my guess. best of luck
The second quarter of 2015 saw the sharpest decline in global PC shipments in close to two years and once again serves as a reminder that last year's brief resurgence was little more than a fluke.
Nobody needs to upgrade every three years now. You can easily hold your hardware for up to 10 years if you really want to.
I can not find any DirectX compatible graphics when I try to play the Sims 2 for the Windows XP. Please Help Me! But I do not have any internet though.
Try this page for help and then let us know what the outcome is.
I have previously on a different PC recorded the stereo mix in Audacity, whilst playing a CD and would get the full frequency range of the CD. On my current PC I now get a 20khz cut off, despite changing the settings (the sample rate and bit despth) on the playback and recording devices in Windows and also in Audacity. Does anyone know why this would be, and if there is any way of correcting it?
Intel has led the desktop processor market for the last decade, dominating in price and performance nearly without challenge since the introduction of the Core 2 chips in 2006. However, as of late the challenges of improving silicon chips has...
"Devil's canyon" take two
Okay so for the past several hours I ve gone through the throes of attempting to get my Asus laptop s built-in webcam to work I took a on laptop cannot Windows 7 webcam the built-in Asus detect my look at Device Manager and had found two items titled quot Base System Device quot or something to that effect I don t quite remember and I thought that one of them would be the webcam Well after searching for the mystery items Hardware ID on Google I had Windows 7 cannot detect the built-in webcam on my Asus laptop discovered that these devices were in fact not the webcam Then I had used the quot Add a Device quot option under Devices and Printers in the Control Panel to try and find the webcam After letting it churn for ten minutes it appeared that Windows wasn t even searching anymore and I was staring at a blank window for nothing The only clue I have about the situation is after running DriverEasy it listed quot USB M UVC WebCam quot as a needed update but it also said quot unplugged quot beside the selection and was highlighted in red After attempting to download and install the driver the program had given me some Packard-Bell webcam driver that is most definitely not correct Packard-Bell still exists This had all started however when I made a clean install of Windows I had just spent the last two days scouring the web digging up my lost drivers and programs that had come with the laptop Everything s been successful save for this one element My webcam is lost somewhere in my laptop I just can t get to it If anyone has any ideas as to what s happened and yes I know it s a possibility the wiring is shot and how to fix the issue please give me any tips that you can I ve done everything possible in my power including trying to find the drivers but you obviously can t install drivers for devices that Windows doesn t even detect Oh before I forget my laptop model is Asus x v B if that helps in any way nbsp
Was this laptop purchased with Windows 7 as the OS that was installed on it ? Or did it come with Windows Vista and you just wiped it out and put Windows 7 on yourself??
According to MSI and Biostar representatives on the Computex 2015 show floor, speaking to PC Gamer, motherboards that feature Intel's new Z170 chipset will become available this August.
It better come with Thunderbolt 3 included, if they want to attract PC enthusiasts.
On a related subject, this new Thunderbolt 3 isn't as good as we hoped...
Thunderbolt 3 also includes an update to the DisplayPort side of matters, though likely not what everyone has been expecting. With the increase in bandwidth, Thunderbolt 3 is able to carry twice as much video data as before. However Intel is not implementing the latest version of DisplayPort ? DisplayPort 1.3 ? in to the Thunderbolt 3 standard. Instead they are doubling up on DisplayPort 1.2, expanding the number of equivalent DisplayPort lanes carried from 4 to 8, essentially allowing one Thunderbolt 3 cable to carry 2 full DisplayPort 1.2 connections. The end result is that Thunderbolt 3 will not be able to drive the kind of next-generation displays DisplayPort 1.3 is geared towards ? things like 8K displays and 5K single-tile displays ? but it will be able to drive anything 1 or 2 DisplayPort 1.2 connections can drive today, including multiple [email protected] monitors or 5K multi-tile displays.Click to expand...
So, basically, they had all the opportunity to have DisplayPort 1.3 included, but decided not to. That is just wrong... It won't even support a single-tile 5K screen. And if so, then what good is it, really?
I am new to this forum..
To start, I had just bought an ASUS computer.. wanting to play games like borderlands 1, left for dead 2 etc. But, when I was very trilled waiting to start the games, both of them had blacked screen and forced shutdown my computer every time after the game has been launched!
I had done many researches in the net, changing the registry values in directx11, reinstalling the NVIDIA drivers (halfway black screen upon reinstalling), changing the compatibility to Windows 7, adding missing physxcudart_20 to the games...None of them works..T-T
Any help is greatly appreciated!
I'd recommend to do the following:
Perform a clean install of Windows
Re-install Nvidia drivers
Download CPU-Z and GPU-Z (or any CPU and GPU monitoring software)
Monitor both while attempting to play games - check for temperature spikes.
Doing the above will help you rule out a lot of potential issues that are causing your problems. The clean windows install will get rid of any OS related issues. You never want to touch the windows registry unless you really have to, especially if you're not very well versed in the way it works. It can cause way more harm than good. With that said, the system crashes were probably due to a bad driver instillation and was causing a BSOD - most modern systems are set to restart / shutdown when this happens. You'll never know it happened unless you changed the configuration to stop the automatic shutdown. It could also be temperature related, if your CPU or GPU overheats, it'll typically trigger a system crash as well and result in the same BSOD sequence.
Let me know how it goes after you've tried what I've mentioned.
Lenovo is the latest PC maker to join the budding PC-on-a-stick movement. The company on Tuesday announced the Ideacentre Stick 300, a wallet-friendly compute stick suitable for use in multiple scenarios.
It's too bad HDMI couldn't supply the power.
I'm trying to connect my PC and my Asus Zenfone 2 with Bluetooth. When I use the "add a device" wizard on Windows 8.1, my mobile phone is detected, but when I try to add it I get: "Windows doesn't have a network profile for this device".
Also, when I try to detect my computer with my mobile phone, itīs not detected.
I'm using a Trust USB 2.0 dongle Bluetooth adapter (the little one you insert on the usb port) that came with a keyboard and mouse Bluetooth set that I used. Could that dongle be designed only for the bluetooth keyboard and mouse set?
The Bluetooth device seems fine as it already detected your keyboard and mouse. However, your phone seems not supported with the current Bluetooth device and you might need to take another look.
Intel has launched a selection of new 5th-generation Core processors based on the company's Broadwell microarchitecture. Five of these new CPUs are designed for performance mobile and IoT devices, while two are socketed desktop CPUs for Intel's LGA 1150 platform,...
The full list of socketed desktop and performance mobile Broadwell CPUs can be found below.Click to expand...
the two pictures link to only R series (socketed/1364, BGA/soldered to motherboard) and mobile/IOT processors. C series (unlocked, socketed/1150) are not shown in the two pictures but are listed in the article.
Infinity displays are all the rage among notebook buyers these days. Dell's XPS 13 (2015) was an excellent example of what's possible when it launched earlier this year and now, they're bringing the gorgeous screen to its bigger brother.
What's an Infinity screen?... Short answers please, I'm not interested enough to Google it.
Much of the tech press regularly overlooks PCs for wearables, smart homes, and IoT-related topics but, in the real world and to many people, PCs still matter a lot. So, this week's news out of Redmond and Taipei (where the...
No matter what others think about W10.
THIS is not a reason for an upgrade, if one has a choice.
Stay away from -remote host,-cloud centered OS.
Take your hardware and host your stuff by yourself.
Do not accept crippled OS (what unfortunaly OS X (since making iCloud a default location for files, belongs to).
Thanks for any help in advance..
I own a WD MyBook 4TB hard drive, which I've used on Windows for the past 2 years. I got a macbook last week and hooked the drive into it, some error message came up so I figured it wouldn't work, however when I went to plug it back into my windows machine I got the "USB device not recognised" message, the laptop is windows 8. I then tried it on my fathers windows xp computer and it seemed to think it was a completely new hard drive..
I've done some googling on it but I just wanted to ask here incase I went formatting it by mistake or anything..any advice/help would be greatly appreciated.
Sounds like you made some procedural error, allowing the Mac to alter the partition - - bad choice.
Using Windows tools, examine the partition on that drive - - should show up as
somelabel (dl): size HTFS
Healthy (other qualifiers)
Try Control Panel ->Admin Tools->Computer Mgmt->Disk Mgmt
Integrated graphics solutions won't get you far when it comes to gaming, but they've evolved to the point that you can actually get decent frame rates in relatively modern games with the right graphics settings. Looking to remove some of...
So they're teaching you how to move all the sliders to the left? ^___^
Hi techspotters it has come time to modify my old rig I m planning to upgrade the cpu without changing my motherboard but there is a slight risk involved that the purchase I am going to make is with CPU board AM3+ AM3 faul So back to basics My current MB M A TD PRO AM3 board with AM3+ CPU USB - link Current CPU Phenom t oc running ghz Current RAM EVOleggera x running underclocked mhz the one to upgrade to AMD FX -- So this is a basic operation a cpu swap but few questions popped up on the research phase M A TD is a AM board which apparently after some searching supports some of the FX series cpus that are AM I have also found the corresponding BIOS that I need to flash myself to to make it work properly and be recognized by the MB link Q amp A FX is known to support mhz RAM speeds my existing RAM runs max at without overclock and is placed x which occupies all slots and might confuse the FX which supports dualchannel as usual Meaning I will need to leave my RAM running at mhz how big will the reduce be in the performance of the CPU- mhz vs When setting up the proceccor I will need to disable the Turbocore to make it stable on the older AM board which only supports cpu speeds up to ghz and the fx on turbo bumps to ghz After disabling turbo all cores are set to run at which by research is the most stable option on my existing MB Will FX bottleneck gtx or gtx and how bad it is going to be Upgrading hardware is always nice but am I making bold move by upgrading a year old cpu to almost as old one And if someone with more knowledge can state me that there is no performance gain to be maid I just might stick with my old as long as its still breathing and calculating Thanks in advance for replys And no changing an motherboard is not an option So fond of my old rig best regards m nbsphttp://www.techspot.com/community/topics/am3-board-with-am3-cpu.214400/
Hi I would appreciate if someone could help me please The problem I have has been going on since about the time I formatted my PC and reinstalled Windows Had issues with BSOD on install because of my graphics card seem to have been slighty dislogded See http www techspot com vb topic html Okey the problem is my mouse keeps freezing up after a while and after moving it or clicking a couple times it works again When this happens I get either a beep or the usb disconnect connect sound depending on which mouse is being used Current using Windows mouse issues freezing 7 Bluetooth Apple Magic Mouse connecting to a generic Windows 7 mouse freezing issues bluetooth dongle this makes a beep when Windows 7 mouse freezing issues it freezes The USB Wireless Logitech Dongle Logitech Mouse I had before this made disconnect connect sound The USB Wired Mouse before the Logitech also made disconnect connect sound I have tried to work around this using several methods but have had no luck Steps taken to try and rectify issue Changed mouse I am on my th mouse now I will not change for another again the mouse is not the problem Tried all the mouses on other computers where they all worked fine I have switched ports on numerous occasions all other device work with no problem keyboard touch screen monitor external hard drive s usb flash I have removed conflicting hardware and ensured only on mouse is plugged in also removed touchscreen cable from monitor I have gone to Device Manager and set USB Root Hub and Power Management tab and unchecked quot Allow the computer to turn off this device to save power quot on all devices I have removed drivers for all other mouse s used previously I have disabled C E as this uses some power saving methods I have check Event Viewer which only has networking errors which all forward to my network drive I have run System File Checker SFC sfc scannow I need to know whether Windows is the issue or whether its the usb ports Can anyone please help me as it is now really bothering me I can t even play Battlefield games Thanks nbsp
This is a problem I have not seen before. Try using this guide to find any other mouse drivers that you may not have deleted.
A leaked Intel roadmap tipped us off in January that desktop versions of Intel's Broadwell CPU would arrive by the middle of this year. We now know that information to be true.
Sounds exciting, I'll wait for that to hit the shelfs.
I bought an interesting little Single Board Computer as an mITX motherboard (a WADE-8020, more info at the link below):
I have another similar board in an old Hoojum Cubit 3 case, and was wondering if anyone might have any other suggestions for a similarly eye-catching case, probably ready-made, though I'm not averse to either buying a DIYed case, or maybe trying to make one myself (I have a Dremel but not much else, and that includes skill )
At Computex 2015, Intel has announced Thunderbolt 3, a new iteration of the company's high bandwidth hardware interface. And for the first time, Intel has ditched Thunderbolt's proprietary connector, instead opting to funnel everything through the soon-to-be-ubiquitous USB Type-C connector.
Can I mention this is f*cking epic!
Ahead of tomorrow's launch of The Witcher 3: Wild Hunt, Nvidia has released a new GeForce graphics card driver that's Game Ready for the open-world action RPG. The GeForce 352.86 drivers are also WHQL certified, meaning they are stable enough for everyday...
Mine were updated hours ago, you just can't beat GFE for this sort of thing (or for game display settings optimisation as far as I'm concerned, it works for me).
I recently moved my computer from one side of my desk to the other and somehow it managed to make it so when I press the power button nothing happens. I've disassembled and reassembled the computer numerous times and tested the psu. The psu is working and it seems like the motherboard is the culprit. What is confusing me the most is that when I short the 24 pin connector to the motherboard then plug it in if I also press the power button I can turn on the computer. I dont see that as a permanent fix just in case it sleeps and I assume it is not good for the computer so I am looking for help on how to permanently fix my issue. Thanks in advance.
Leaked specifications from a pair of upcoming Intel Skylake processors have hit the web. If accurate, we could see Intel pumping out CPUs with high clock rates on par with the company's existing Devil's Canyon offering.
I read that the performance jump between Broadwell and Skylake will be like what we saw with Prescott to Conroe. Do you believe this is possible with the unlocked Skylake-S parts? Have you heard this rumour?
I have a Gateway NE56R and ever since I updated to windows 8.1 I cannot use the internet at home even though it says it is connected to WiFi, but it works at other places. Please help asap
I have on same HD-500GB win7 and win xp. I conect another HD-320GB in sata drive. Bios recognize both HD, win 7 too, but win xp recognize only HD-500GB. When I go to disk manager in win xp it's same problem I only see one HD-500GB. Please help me.
Good news on the consumer solid state drive front as storage capacity is expected to ramp up dramatically in the coming months thanks to a partnership between Intel and Micron.
Will believe it when I see it but it sounds freaking awesome!
Intel's Compute Stick, the impossibly small computer crammed inside an HDMI dongle, is now available for pre-order running your choice of Windows 8.1 or Linux (Ubuntu 14.04).
I like it.
It has been rumored that there will only be a short gap between the launch of Intel's socketed Broadwell and Skylake CPUs for desktop systems, and as such, the company will only launch two LGA 1150 Broadwell-based CPUs onto the...
It often makes you wonder why push Broadwell now, when Haswell has a lot of traction and it's a few months to Skylake. They also included some BGA in the mix for other devices, but pushing a desktop chip seems a bit odd. Given the few months in between them and people unlikely, to drop Haswell unless for lower power systems.
All in all it's negligible power savings, we'd need to obviously see how the integrated graphics fair. It might be a solution for some people, but obviously not everyone is going to see it as a huge importance. It's kinda amusing to me because, I'm looking to replace my mobo / CPU right now. I'd likely sit and wait for Skylake, simply because I'd only be wanting to buy one upgrade. Upgrading is a low priority right now anyways, so there's less inclination to spend right away.
One feature of Intel's chipsets that hasn't changed much over the past few years, even for the enthusiast X-series chips, is the amount and speed of the PCI Express lanes provided. Most chipsets, including the latest Z97 and X99 models,...
I was wondering when they were going to address this.
This was a major handicap on the Haswell E platform.
Hello I apologize in advance for my almost complete lack of computer knowledge That said my PC was built for me by one of the IT guys at work who has since moved on I can t scare him card Good with Windows 7? graphics compatible up from his last known email addy So I m sort of out there drifting on this stuff trying to find any help I can The PC is connected to the home theater system TV through HDMI About weeks ago and video from the internet stopped producing sound In addition the PC doesn t Good graphics card compatible with Windows 7? play audio dvds anymore And when I click on the samples in the library I can t play them either I m assuming without knowing the graphics card is shot I think it s about four years old I opened up the box pulled out the graphics card I didn t make a note of manufacturer model but my device manager says it s nvidia and the driver is up to date and cleaned it I plugged it back in still no sound I can play youtube videos or stream online content but none of it has sound Does it sound to you guys like I need a new graphics card If so I need a recommendation for a better than average one that is compatible with windows professional something in the range or so Any help would be greatly appreciated Thanks nbsp
Open up nVidia Control Panel.
Under Display select "Set up Digital Audio".
Verify settings to make sure they are correctly set up to send audio.
A while ago, after accidentally opening the Store app, Windows forced me to restart to install Windows 8.1, which I was unable to weeks before because of driver issues. I didn't need Windows 8.1 yet, so I didn't download it before then.
However, during the installation, it failed (again) due to either my antivirus or the aforementioned driver issues. Upon logging back in, my computer was unable to find any WiFi networks. Seeing as I live in the middle of a densely populated city, this isn't possible. Plugging in an ethernet cord still works, so no issues with that adapter or my home internet. I checked all the drivers for my WiFi adapter, and my Ethernet adapter, and both are up to date and display as working properly. Restarting several times didn't seem to fix this issue, and using system restore didn't seem to work either. I used the Troubleshooting tool, and that didn't give my any helpful advice or answers, so I got nothing.
What can I do to fix this issue?
For reference, I have a Broadcom 802.11ac Network Adapter, Driver Version 184.108.40.206, and a Qualcomm Atheros AR8151 PCI-E Gigabit Ethernet Controller, Driver Version 220.127.116.11.
Never mind, it seems to have resolved itself overnight after I put it to sleep for several hours.
I wonder if anyone could help me shed some light on the best process for the above subject.
I currently have a Dell Studio XPS 435MT (Vista 64bit) running two HDD's in RAID 0 (as from factory) I need to install Windows 7 64bit and would like to also install it onto the new SSD I have bought (Crucial 128GB) as an upgrade.
Could I simply take the current HDD's out (after backing up essential data) to keep safe as backup plan and add the SSD into slot 0 and install Windows 7?? Then possibly add say a 1tb storage drive to the system later?
One solution someone has sent my way is to clone the two 500gb RAID 0 drives to a single 1tb drive then install Windows 7 onto the new SSD and have both drives on a multiboot? Could this work?
I have seen/heard many versions of how to go about this install but no real evidence of a true way?
Any help would be much appreciated.
It takes 3-500GB drives to give you 1.3TB of storage space because of formatting over-head. 2-500GB drives will be considerably less than 1TB. Keep the 2-500's in a single RAID array and set the SSD as a separate partition for Windows 7
Is there a way to connect a displayport monitor to an IBM style PC? Found a new monitor in my brother-in-law estate and was wonder if there is a way to use it. Thanks for any help
If the monitor and the video card in u'r computer have the same connections, and u have a power cable for it. It should work if it is new as u say. Try it and see. That should not cost anything.
Hi all I have a problem thats been ongoing for months and I just cant get it solved so im hoping you can help The problem is that whenever someone speaks in teamspeak ventrilo skype insertvoiphere my game volume drops to almost nil This volumes game Windows ducking is not a problem tied to any individual app as ive been through all the individual fixes to no avail such as volume control plugin disabled etc And the fact that every single voip program does it leads me to it being a windows option somewhere I have also gone into the sounds gt communication and have that set to do nothing It still happens It is not just with Windows ducking game volumes game either I tried different games and the sounds on every single one duck out when someone talks Also another note it also ducks out when I click to run any program on my pc via admin You know when the box pops up asking you if you want to allow this program to make changes to your computer where you click yes When the box pops up and it goes quot beep beep quot at that exact moment the game volume ducks out note - its only ducking game volumes too it doesnt duck out media player youtube vids or anything like this Please please if anyone can help me solve this issue it would be so appreciated Thanks nbsp
I'm assuming that you are on Windows 7? Go to the sound icon on the bottom-right of the desktop, right click and select playback devices. Right click on your default device (Either speakers or an integrated chip set normally) and select properties. Go to the advanced tab and make sure that the Allow applications to take exclusive control of this device box is un-ticked.. and make sure that the give exclusive mode applications prioirty is un-ticked, then report back to see if it has worked (Don't forgot to apply and OK the changes).
Hi, a friend of mine has dropped off a Mac HD to recover some pictures for him. He supplied the HD and a ProBox HDF-SU2. This I would think to be plug and play but no matter what I do including swapping to known good USB sockets the ext dive is not being seen. Windows is not even offering to install a driver for the ProBox HDF-SU2. Any help gratefully received. TIA
It s going to be interesting I ve heard so much contrasting information about Intel Vs AMD I m curious as heck to see which is better So Former Rig Haf Mid Tower AMD Running at stock- could not overclock this Probably because my Watt PS couldn t take the voltage Noctua NH-D Gigabyte FXA-Ud AMD Radeon Gamer Ram mhz Twin Asus Gtx- Not TI GB Evo My four year old Watt PS just could not take that much voltage so I decided that if I m going to replace the PS I might as well replace the case Hey and if I have to do all that work I might as well Sidewise Grade to Intel Mother Board and CPU I changed my Ram for Two reasons st on a benchmark it came in as very slow nd AS-Rock compatibiliy page had the G Skill Trident mhz Ram as the only compatible gb mhz chip Sure enough XMP Profile recognised it as a mhz chip No Problem So they say in for a penny in for a pound Sent the Ram back to Amazon for Refund and my Do rig-Which 9590 my Shootout Think Intel Win? Will Verse AMD new on You 4820 CPU is on Ebay Auction right now bidding is up to hopefully by Sunday it ll be in the low to mid range So I Intel AMD 9590 Verse 4820 Shootout on my new rig-Which Do You Think Will Win? won t take a really big beating I chose the because I hope that my SLI Video Cards running in PCI- mode would be better utilized by this CPU It also has a reputation as a overclocking beast So far I can get a stable OC to New Rig AreoCool - Awesome Case Cubular Intel K Ivy As Rock Extreme G Skill Trident mhz ram Twin GTX- EVGA Supernova Watt PS Gb Evo So far the Intel seems to run smoother but the verdict is not in yet Amazingly enough Windows accepted my upgrade and I didn t have to reinstalll Problem is that I have years of garbage in that system also stuff left over from the AMD so last night I backed everything up and did a fresh install of Windows Rock and Roll Out with the old and in with the new Anyone have a prediction about which will be the better performer I have a few different Benchmarking Utilities including Passmark and Furmark I ll post the performance as soon as I get done with my testing nbsp
The reason you can't overclock your 9590 is because your motherboard has weak VRMs and VRM cooling. Also if you have a revision3 board that might be why too.
The 4820k is a far far superior CPU not sure where you'd get any conflicting information.
And no your FX9590 is certainly not holding back SLI 660.
BTW furmark is a gpu test.
Hello everyone. I am a 3D arch viz artist, using 3Ds Max + Vray render. I am looking for additional render power.
My budget is around 2.000 Euros, so I was considering 2 options:
A guy is selling a HP DL580 G7 server, which includes 32 GB ram and 4x Xeon E7540 2 GHz (6-core CPU, based on Nehalem), which is a total of 24 cores / 48 threads.
For the same money, I could buy a 5960X system or 2 systems running a Core i7 4790 CPUs. The hardware in my country is a bit more expensive when compared to USA / EU.
I can't find any benchmarks for the E7540 CPUs, so I am not sure if 4xE7540 would outperform 2 modern 4-core Core i7 CPUs (like the 4790K). That would be 24cores vs 8 cores / 48 threads vs 16 threads.
Vray render uses all of the available CPU cores, no limit there.
The 5960X system, if for the same money would be the best buy.
This laptop will not save documents or files to the hard drive. They are there when initially saved, but disappear when the system is next switched on.
Anyone help me pls...
You need to say whether you are new to computers or not and which Windows operating system you have. I remember when we first got a computer many years ago the wife thought that I'd deleted her work. In fact we didn't know whereabouts it was saved and couldn't find our way around. If you are a beginner using Windows 7 try clicking on the Start button and then Documents in the menu that opens to the right. By default that's where things are saved but you can use the Save As option and choose a different location.
Hi guys, I have set up a RAID 0 array using an XFX Revo64 controller card and the Netcell bios setup that cones with it. According to the Netcell bios the array is working but booting into 8.1 I cannot find the drive in explorer and device manager shows the Revo64 as "Generic Mass Storage Controller ".
I am very new to Raid this is the first array I have tried to setup. Any help would be greatly appreciated
Why not use the RAID card as more sata ports and then use windows to make your RAID array? I've never used a controller but im sure that it would work for that purpose.
just go on youtube and find a video on how to setup RAID in windows 8. I know its possible for windows 7 to im pretty sure 8.1 will have it
On my studio pc, I've installed a new rack mounted firewire audio interface in the studio. On the other drives (windows 8.1) the interface has installed perfectly but on the xp drive, although the drivers etc have been installed, once set, it works perfectly with the new outboard soundcard.
However, whenever I reboot to the xp drive, xp always reverts back to the on-board realtek sound card. I set the default to the new interface (a Presonus Firestudio Project) but every reboot it defaults to the realtek.
The motherboard is a P5N-E SLI if that helps.
How can I stop this happening so the new interface is the default?
Thanks in advance,
hi guys wish you all a great new year.
im facing a very annoying issue with my laptop, some keys are not working, the left **** and the windows key I just don't know whats happening.
can someone please help mw with that.
thanks in advance.
I have done everything I can think of. I have windows 7 64 bit. I have disabled/re-enabled sound cards, uninstalled/reinstalled drivers. I have checked all settings I possibly can think of. My head phones work GREAT and on startup I can hear the sound, but once in windows, no sounds through my speakers.
Hi all. Simple question.
Would a Intel Q9550 Quad core CPU be worth the $100(AUD) I can get one for, over my current CPU?
I know my rigs old but shes all ive got for now until I built one from scratch in about 2 years time.
Uses are web,email, gaming, some photo editing, storing/opening manuals/catalogues and some 3D work such as google sketch ect....Any/all help appreciated.
Windows 7 Home Premium 32-bit SP1
Intel Core 2 Duo E7500 @ 2.93GHz
4.00GB Dual-Channel DDR3 @ 533MHz (7-7-7-20)
ASUSTeK Computer INC. P5G41T-M LX (LGA775)
VS248 ([email protected])
1024MB ATI AMD Radeon HD 5700 Series (XFX Pine Group)
465GB SAMSUNG HD501LJ ATA Device (SATA)
SONY DVD RW DRU-840A ATA Device
ASUS Xonar DGX Audio Device
PSU Silverstone 500w SST-ST50F-230
The Q9550 is still a solid quad core CPU, especially in comparison to the E7500 which is a bit anaemic thanks to its 3MB L2 cache (the Q9550 of course is blessed with 12MB). If completion time is a priority for content creation then it does represent a decent upgrade for your system.
I wouldn't recommend any overclocking adventures with that board though. While virtually any Q9550 (especially the E0 revision) runs at 400 FSB ( 3.4GHz) or better with anything above the stock cooler, the power draw goes up fairly markedly also, so stability is very dependant upon the voltage regulation of the board and the PSU's capacity.
Ive got a 2 yr old laptop that my parents bought for me at walmart of all places. I basically just use it for facebook, facebook games, and email. havent had any real issue til now. at first, when it was plugged in it would start up and let me log into windows but would immediately shut down. later it started going through a disk check when I turned it on and would shut off before it was complete. if the power cord was connected it would have a big red x over the power cord logo on the bottom right. I was going to factory reset it but I cannot get that far before it shuts off. bettery is fine and power cord is good. had them both tested. PLEASE HELP!!! IM VERY POOR SND CANNOT TAKE IT TO A REPAIR SHOP!! tyvm
It won't stay on long enough to do anything so this doesn't look promising. Have you tried removing the battery and just using the power brick?
I am trying to set up my Windows Xp computer as a VPN server I have taken the initial steps I get to the Accept Xp setup VPN hanging server Windows incoming connections screen and click okay The computer hangs for about a minute or so and then comes up with the following message Incoming connections depend on Routing and Remote access Windows Xp VPN server setup hanging service which was unable to start For more information check the system event log I presumed I had to go to control panel performance and maintenance Administrative Tools Event viewer I have already made sure that Routing and Remote access are enabled as well as Telephony I could not find Netbios in the services list and don t know where to Windows Xp VPN server setup hanging look for it Also when I try to start Routing and Remote access service manually I get the following message Windows could not start Routing and Remote access on local computer For more information review the System Event Log If this is a non-Microsoft service contact the service vendor and refer to the service specific error code- Can some one give me a step by step walk through of how to resolve this issue so I can connect to that computer from work over the internet nbsphttp://www.techspot.com/community/topics/windows-xp-vpn-server-setup-hanging.207658/
This is my first thread here, and my english is not that good also, so excuse me for any mistakes
I have my Prestigio PC for a 5 years and there were no problems. But today when I started the PC, a error occured.
On starting screen(American Megatrends GUI) there was written: "Primary IDE Slave: Not Detected" and after a few seconds my screen went black and "reboot and select proper Boot device or insert boot media into selected boot device and press a key" message appeared.
So I thought that I will just need to put my Win 7 CD to the CD-ROM, but then I found out I lost it while we were moving.
My BIOS is also saying that Primary IDE Slave is not detected
Is there any way to solve this problem? Is there any way to boot Win from USB?
Thank you for answers
Have a nice day!
Open up the computer, check that the cables are properly 'seated' (pushed in all the way) on the drive and on the motherboard. I know you said it has worked for several years, but for it not to boot with the Primary IDE Slave not connected the only way that makes sense for this to happen is if the optical drive is jumpered to Master and the hard drive itself to Slave. That is a bit unusual. You typically would have your hard drive as Master and the optical as Slave. It doesn't really matter, as evidenced by it working in the past, it just isn't a 'normal' setup.
If the cables are seated properly (power and data), your drive could have failed.. 5 years is a decent lifespan for a hard drive.
You can make a bootable USB for Windows 7, although you can't without a working computer.
Hey guys, I was recently in the malware section, because my laptop had some problems and could not connect to the internet. Broni was very awesome and helped me clear my laptop up, but we still couldn't get it to connect to the internet. He advised me to come here for help.
I will link the previous thread, because there are some log files toward the end I think would be much more helpful than me explaining problems.
Thank you so much for any help.
Can you try to re-install the WiFi driver?
This all started after I reset the router putting in new pass code I m using same name of the old SSID When you click to Windows SSID was to unable connect on the wireless network connection on the name of my SSID on connect it saying Getting information from SSID this sounds like Windows was unable to connect to SSID good thing that windows can see the router and talk to it Type in the network key same thing looks like windows can see the router and talk Windows was unable to connect to SSID to it I type in the network key and OK Than it is saying windows was unable to connect to SSID name I have set up other computers and it can connect but this one computer running windows cannot I have the pass code down on paper and other computers can connect So wrong pass code is not the case The only thing I can think of is is computers using the old profile or my network card may need to be reset When I open networking sharing center and click on manage wireless networks I removed the old profiles in the list But I m not sure if there is still some kind of conflict or the old setting still there some where Well because I m using the same SSID despite the router reset and new pass code I m not sure why I cannot connect unless Windows was unable to connect to SSID the windows thinks I m connecting to the old SSID I tried to restart the computer and no change nbsp
Force the system to forget that SSD and then reboot.
Now look for it again and enter the passphrase.
I have a Windows 7 HP desktop system that is connected to the internet via an ethernet cable. The system says it is connected, and a ping confirms it is accessing the internet. BUT, all the browsers say the computer is not connected to the internet (tried Chrome, Firefox and IE). All of the Microsoft network adapters (6to4, ISATAP adapter, ISATAP adapter #2, Teredo Tunneling Adapter) shown under device manager cannot start (Code 10). the Realtek PCIe FE Family Controller is the only network adapter shown as working properly. What do I need to do to fix this? Let me know if there is any other information needed to help me.
Does your router see this computer on the network?
Are you on Private Network or Home Network?
Is the IP address showing 192.168.x.x or is it showing 169.xx.xx.xx?
NIC network card you can do a few things. You can can disable it and re-able it.
Open dos prompt
type: ipconfig /flushdns
type: ipconfig /release
type: ipconfig /renew
Give this a sec or two.
Now under services.msc (use the control panel and type services)
Select view local services
Scroll down for
DHCP Client (right click and stop it) wait then right click and start it
DNS Client (right click and stop it) wait then right click and start it
If none of the above work go into the device manager. under control panel type: device manager. click on device manager
-Realtek PCI-e this one uninstall the drivers (BUT DO NOT DELETE THEM)
Two options here.
One: Scan computer for new hardware changes
Two: Reboot the PC
Choose Two, because Windows will re-install the drivers and setup network card settings. for you. The Choosing One would do that same but you really want to flush out any prior issues that got you to this point.
I had a new PC so I thought I would do a recovery disk on a separate partition of my parent's disk. Turns out windows wipes out everything regardless of partition when it does that. So now lifelong memories are gone and I'm freaking out! I used EaseUS to make different partitions which were deleted. After I found that the partition I chose stayed the same size but was renamed RECOVERY and it had the recovery data in it. However the rest was "unused" and so I dragged the RECOVERY to make full use of the disk and then I started scanning it deeply with hard drive recovery software. I am now through scanning with my 2nd program now (1st one didn't give me the files I needed) and I'm using RecoverMyFiles. The problem is I'm not really getting back any of the files I had deleted by windows, but I get some stupid windows files which were probably deleted in the recovery process!! PLEASE help me!!! I am desperate. Future hanging in balance thank you.
There are quite a few programs you could try, I have had most success with Recuva by Piriform, but recently this program was said to be excellent by a user,
Obviously it's worthwhile trying both of them.
Good day Sir/Madam;
Hi! I got a problem with my pc when starting it because it beeps 3 times, so I tried to removed the cmos battery, memory and the hardrive and return it again but still it beeps. what should I need to do,Hope you will help me regarding this problem. thanks a lot.
Hi I had this problem a DVD-R 7 Won't Windows Vaio read - couple months ago fixed it and am now facing the same problem again I have a Vaio Windows My CD DVD player isn t reading any of my DVD-R cds Whenever I put in a DVD-R cd autoplay comes up and it asks to format the cd I checked these DVDs and they work on other computers They re all burned DVD with files on them Before when this happened I tried many different things I Deleted upper lower filters -- Actually I didn t have upper or lower filters to delete System restored Deleted and updated drivers Finally found a post talking about creating a new key in the regedit NoCDburning After doing this it started working Fast forward three months later my cd dvd player won t read any Vaio Windows 7 - Won't read DVD-R of my DVD-R cds again I did the same things all over again System restored Deleted and updated re-installed drivers Ran Fixit Looked for upper lower filters -- not there Tried looking at the NoCDburning thing again -- deleted and repeated the steps and nothing is happening I don t want to reboot my computer because I already did a month ago and it just takes way too much time for me to reboot everything all over again I cleaned my CD player as well like most of you guys said before I know my drive is still working as it worked before after I fixed it I checked and the last time this happened was in June Since then the only new things I installed updated were CC Cleaner Itunes and some other programs I have Spybot as well Can someone please please please help me I ve been looking for an answer everywhere and I m running into the same answers Thank you nbsp
Have you tried a a system file check to see if Windows can sort this issue out?
sfc /scannow (in admin mode.)
Also if you just explore the DVD do you see the list of files on it? Or is the DVD-R not 'seen' by Windows at all?
Or is the error only with the autoplay part? (Windows trying to help you choose a media player from whatever you have installed?)
Hello hello After having a problem with my cd dvd drive I rebooted my computer and did a clean install of Windows from my Vista So right now I m running Windows Windows not install (Touch/slider) FN - 7 Clean Keys working I have a VAIO - VGN-CS J Windows looks and feels great so far The only problem is my little sliding touch pad at the top doesn t work I don t know if it s FN keys but on top of my keyboard there s a little sliding touch pad for volume along with a fast forward rewind key I used to be able to slide the volume up from there but now it s not working I looked it up and I know this has to do with my clean install of windows I tried installing a bunch of drivers like everyone said online Sony Shared Libraries Vaio Event Notebook Control Device And a bunch of other drivers that people talked about I don t know what s wrong but it s still not working so I did a system restore to before I installed everything so that I can have a clean slate Can someone please help me fix my volume control slider please Thank you so much nbsp
Laptops have extras over and above Windows and if you reinstall the OS or upgrade it you lose these. I've been there and done that with the FZ. It was broken when I bought it and the hard drive had been removed. Fixing the computer was very hard, installing Windows 7 was easy. Afterwards, like yourself I found that the function keys didn't work. Trawling forums and looking for drivers then sorting it out took ages and that was the most challenging part of the whole exercise. Everything necessary was on the Sony support sites but these were not user friendly and I needed to use several Sony sites. Needless to say Sony support were clueless. In the end I got everything functioning but if you can manage with things as they are I'd not bother. One tip, although it might not work with your particular Vaio model is that stuff has to be installed in a particular order otherwise some keys don't work.
That'll teach you to mess with Windows when a cd/dvd plays up.
My USB drive is enabled. The USB flash drive or any other storage device is recognized when connected to my laptop. But when I click on the drive in windows explorer, it says access denied. The same works fine in other laptops. I have admistror previlages. There is no local group policy set up on Removable storage access. I have searched multiple forums and tried out various options, but still cant connect to my USB drive. The drivers are successfully installed and are the latest. This happens even when I connect my camera or mobile phone. It shows up as 'Removable Disk' in windows explorer, but cant access it. I have given authorization to the drive as well. Please help.
My old hard drive was a sata drive but it failed so I had an old ide 80gb barracuda 7200rpm drive that I wanted to install windows on but when I load the windows installation and goto custom it wont show my drive. My bios detects it its just windows . I tried using diskpart and even formating the drive to ntfs witha complete whip but still no luck .
Perhaps the hard drive's jumper setting is incorrect. Are there any other IDE devices connected on the same cable as the HDD?
Hello...I will start from the begining .
I bought the Acer V5 and tried booting it up...it came with boot-up Linux which means nothing to me so I made a Windows 8 bootable USB and the problems started. First I could'n find the USB and after enabling the Legacy mode it finally found it and booted from it. Turned out the partitions are GPT and as I made the USB MBR it couldn't install so I canceled which I guess was my mistake but there was no other option. After that I created the bootable USB with GPT partition scheme and tried again. Unfortunately this time I got something called GNU GRUB....wth? I googled around and found the commands required for booting - root (hd1,0), then chainloader +1 and finally boot. Then I get the famous The Boot Configuration Data for your PC is missing or contains errors with Status: 0xc000000e. Of course tried that couple of more times but still to no avail. I cannot recover or repair as Windows was never really installed, so I don't know what to do....Hopefully someone here would be able to help. Thanks in advance guys.
I an trying ti install a video graphics card, when I plug in to my pci ex slot and plug in the leads the screen does not work, but the computer does, now I see that I have a pnp monitor but the card and a vga adapter on it, I have tried everything possible but cant get to work, anyone any ideas?????????
So heres the story The computer has been working fine for several years Last night I decide to D850MV/D850EMV2 long Three desktop board beeps on Intel plug in my tv to the desktop via dvi It Three long beeps on Intel desktop board D850MV/D850EMV2 works fine and I dont have any problems I get home today and try and turn the computer Three long beeps on Intel desktop board D850MV/D850EMV2 on and I dont get any video signal to either the tv or the normal monitor Also long beeps accompany start up it sounds as though things boot but I dont get video or sound but it sounds like the hard drives click now and then like normal and the fans all run fine Ive swapped the first ram stick with one other and havent tried the rest yet and I have not changed the video card yet but plan to in the next minutes as of writing this Nothing looks physically damaged and I dont have any extra ram for this computer laying about since its a rambus so all I can do is swap the ram thats in it around and because I cant get video I cant run a test on the ram Suggestions or help would be appreciated Specifically what the long beep codes mean ive Three long beeps on Intel desktop board D850MV/D850EMV2 found a couple different versions of the code online and not sure which is correct Also what might have caused the problem plugging the tv in thats the only thing I did different unless someone was messing around with it without my knowledge or could it just be from years of wear or what nbsp
I think three beeps on Intel is a memory issue. At least that what it was when I had a stick of cheap RAM crap out on me.
I'd run Memtest and go from there
RAM can fail from a number of causes. Heat exposure, flaky transistor junctions, who knows. I seriously doubt plugging the TV in had anything to do with it.
You could go into BIOS to ascertain if the RAM voltage is set correctly. Over-volting is a DIMM killer.
You should be able to get documentation for that board directly off Intel's web site. Intel used to give BIOS beep codes ion the board/chipset manuals.
They also have hardware monitor software as a free download. Look up "Intel Desktop Utilities Lite".
Recently I noticed that my laptop speakers aren't working consistently at all. Sometimes I watch youtube, listen to pandora, and everything will work fine. Other times it won't work at all. I've been getting by like this for a week, but now it seems like now the only audio my speakers will play is a notification sound. I still have the computer under warranty, and I can take it into the store and get the speakers fixed. However, I was wondering if there was a way I could skip all the trouble/paperwork of taking it back in? maybe I just clicked something I shouldn't have?
Any tips are hugely appreciated!
I m kind of obsessed with fps on Will cod intel on i3 3240 core ghosts? bottleneck 760, the gtx my games and on wow with vertical sync I get steady fps but sometimes it goes to and when goldshire is packed it goes to like when theres alot of people I ve ordered the Intel Core i - K GHz Ivybridge will games be much better with this upgrade I also got gb of ram azrock z extreme mobo corsair w power supply need to upgrade that too for overclocking right now im running cod ghosts well enough for it not to affect Will intel core i3 3240 bottleneck the gtx 760, on cod ghosts? my gameplay probably but I m aiming for constant fps so my pc beats ps and xbone I sold my ps graphics card is this one http www kfa com hof shtml I think it s best on the market massive card and seems like it has nice overclocking capabilities but I cant overclock because of my powersupply maybe my powersupply could be bottlenecking even without overclock I m having suspicious thoughts that my mobo is a bit disfunctional cuz when I swap ram slot and put gb stick of ram on A slot and the other one in B my pc wont start initial boot process overall im happy with my new system tbh Here is my system specs KFA GeForce GTX HOF MB GDDR PCI-Express Graphics Card NPH DT KXZ ASRock Z Extreme Intel Z Socket DDR Motherboard Intel Core i - GHz Ivybridge Socket LGA Processor W - Retail Kingston HyperX Blu GB x GB DDR PC - C MHz Dual Channel Kit KHX C D B K GX Western Digital Caviar Blue TB SATA Gb s MB Cache WD EZEX - OEM Single Platter HDD Corsair Builder Series CX w Modular Plus Bronze Power Supply CP- -UK Corsair Carbide R Compact ATX Case - Black CC- -WW Cooler Master Hyper Evo CPU Cooler Antec Formula Nano Diamond Thermal Compound NVIDIA PROMOTION WATCHDOGS Special Edition PC Game - Email Download View your codes here DHL Worldwide Express VAT Order Total Thanks guys Chris I don t pay VaT where I live but since this is like one of the only sites that ship to where im from the shipping goes up so it s nearly same price as if I were to pay vat with no shipping Just seen a review on my psu someones complaining that it pulls back gpus or something AvoidFirstly not to complain about OCuk they ve already replaced my first unit no questions asked Currently on my second CX M soon to be third - and hopefully different PSU This particular model seems to suffer horrendously with coil whine under GPU loading Incredibly disappointed with Corsair quality control The unit buzzes when the machine is turned off and really ramps up to varying frequencies and amplitudes under gaming loads Avoid at all costs If like me your stuck with a size constraint of mm thro case restrictions then really do look elsewhere nbsp
So I built my system using this SSD caching It works really well My hard drive is terrabyte and my Cache drive is a gig ssd Lately while a Intel Storage Rapid Technology question.. playing Star Wars the Old repubic I have been freezing Intel Rapid Storage Technology a question.. in game This freezing completely locks the computer I run Teamspeak and I can still push to talk and my friends can still talk and I can talk to them via this during the freeze What is odd is Cnt alt delete will not bring up the control panel to allow me to kill the game I am just stuck Normally I would say this is a Video driver issue I did cleanly reinstall the latest Nvidia driver and this will still occur sometimes Now when I disable RST I never get the problem I can play and play and play When I reactivate RST to maximized I can still play but its like a timer After about or days the Freeze will happen So my RST question is has the driver been updated since when I built my computer and is it possible to update this driver now without having to re-install Windows and all my programs If I am left with having to re-install I am likely to just fork over the money and just buy a gig SSD and keep Windows and or of my favorite games on it and use the Terrabyte drive for Music videos and storage nbsp
Yep, there's 2013 versions for Win7.
I have a Windows 8.1 Laptop and yesterday it said I had no connections.
My computer is wireless but then it went to Ethernet it didn't let me connect to anything either.
I tried looking things up to see how to fix it but it just kept talking about buying cables.
Anyone know whats wrong?
You may try to disable your Ethernet adapter (wired connection) while you're connected via a wireless connection through your wireless adapter.
Hi, not great with computers and had a look around at various forums and can't find a solution to my problem.
Essentially, whilst I can view the wireless network connections available, I cannot connect to the wireless connection I want to although all other computers at home can connect.
I think the issue is that I have no IP address on this computer (using Windows XP that has just been reinstalled). The result of ipconfig/release is:
No operation can be performed on Wireless Network Connection 2 while it has its media disconnected.
Sorry if further information is required, will provide whatever is needed. Thanks for any help!
First disconnect any wired connection and THEN attempt the wifi.
Something called DHCP is responsible to give the PC an IP address and also the DNS addresses (regardless of wired or wireless).
This is my Entire system spec Im looking to upgrade my processor but I need help Operating System System Model Windows Home Premium x Service Pack build Install Language English United States System Locale English United States Installed AM Boot Mode BIOS Secure Boot not supported eMachines ET G System Serial Number PTNBA Enclosure Type Desktop Processor a Main Circuit Board b gigahertz AMD Athlon II X u kilobyte primary memory cache kilobyte secondary memory cache -bit ready Multi-core total Not hyper-threaded Board eMachines MCP PM-GM Bus Clock megahertz BIOS AMI P -A Drives Memory Modules c d Gigabytes Usable Hard Drive Capacity Gigabytes Hard Drive Free Space HL-DT-ST DVDRAM GH N SCSI im with AMD is board? to my What Processor mother compatible this And new CdRom Device Optical drive WD Virtual CD USB Device Optical drive Generic- Compact Flash USB Device Hard drive -- drive Generic- MS MS-Pro HG USB Device Hard drive -- drive What AMD Processor is compatible with my mother board? And im new to this Generic- SD MMC USB Device Hard drive -- drive Generic- SD MMC MS What AMD Processor is compatible with my mother board? And im new to this MSPRO USB Device Hard drive -- drive Generic- SM xD-Picture USB Device Hard drive -- drive WD My Book USB Device Hard drive GB -- drive s n WMAVY WDC WD AAKX- CA SCSI Disk Device GB -- drive s n WD-WMAYUL SMART Status Healthy Megabytes Usable Installed Memory Slot DIMM has MB serial number DE B Slot DIMM has MB serial number D B Slot DIMM is Empty Slot DIMM is Empty Local Drive Volumes c NTFS on drive GB GB free k FAT on drive GB GB free Operating System is installed on c Network Drives None discovered Users mouse over user name for details Printers local user accountslast logon Quentin PM admin UpdatusUser AM local system accounts Administrator AM admin Guest PM HomeGroupUser never Marks a disabled account Marks a locked account HP LaserJet Professional P w on IP Microsoft Shared Fax Driver on SHRFAX Microsoft XPS Document Writer on XPSPort Controllers Display ATA Channel Controller ATA Channel Controller NVIDIA nForce Serial ATA Controller x Standard Dual Channel PCI IDE Controller What AMD Processor is compatible with my mother board? And im new to this NVIDIA GeForce GTS Display adapter DELL WFP Monitor quot vis s n XX- JU -XXXXX- - S June Bus Adapters Multimedia Standard Enhanced PCI to USB Host Controller Standard OpenHCD USB Host Controller HP Webcam HD- Mobiola Wave Audio Device WDM Mobiola Web Camera Video Source NVIDIA Virtual Audio Device Wave Extensible WDM Realtek High Definition Audio Senstic PocketAudio Senstic PocketCam USB Audio Device Virus Protection Back to Top Group Policies No details available None discovered Communications Other Devices Hamachi Network Interface primary Auto IP Address Gateway Dhcp Server Physical Address A D Connection Speed Mbps Microsoft to Adapter Microsoft ISATAP Adapter NVIDIA nForce Mbps Ethernet Auto IP Address Gateway Dhcp Server Physical Address FC C AA Connection Speed Mbps Teredo Tunneling Pseudo-Interface Networking Dns Servers HID-compliant consumer control device x HID-compliant device x USB Input Device x HP Webcam HD- HID Keyboard Device x HID-compliant mouse Microsoft PS Mouse USB Composite Device x USB Mass Storage Device x USB Root Hub x Generic volume shadow copy WD SES Device E F G H I nbsp
That is an AM3 socket CPU which means it should be compatible with the Phenom II series CPU's. I looked up the board and it should still support up to a 95 watt CPU so any Phenom II X4 CPU with a 95 watt TDP would work on it.
Whenever I connect my Hard-disk to laptop, my laptop slows down and am not able to open the hard-disk folder. Am not able to access my data in it. As soon as I disconnect the Hard disk, laptop gets back to normal. Can anyone please help with the issue ?
If it's physically damaged, nothing you can do it in your own. You need to consult it to a professional unless you have knowledge and experience on some DIY hard drive repair.
I have got a new desktop PC, which works fine with Ethernet but I am not able to connect through wireless.When I tried to connect to the broadband, it says error connecting to the Broadband connection
Error 651: The modem (or other connecting device) has reported error. However, same comnnection works very well with my vista home premium Dell Laptop.
Thanks in advance
How to reset TCP/IP by using the NetShell utility
need to know if I can upgrade my graphics card for upgrade to windows 7.
current graphic card:ati radeon 9200 se 128mb ddr tvo
computer :fujitsu siemens scaleo 600
motherboard :microstar ms-6585 2.oa
power supply:dc output 250w
thanks so much.
I don't know if you CAN upgrade your graphics card, but:
You most likely don't NEED to.
It's not really a good idea to upgrade at all. Those parts are old as dirt and you won't find anything cheap that'll fit.
I have an Acer E1-571 suddenly I have an X on my audio controller icon on home page and no audio devices in control panel. I have tried installing sound video and gaming controllers and then tried to install update but it says best already installed and still no Audio.
Any and all help greafully appreciated and many thanks in advance
Look for audio drivers on the motherboard CD delivered to when after purchasing your system. If you can't find it or don't have mobo CD around, navigate to manufacturer website and download driver for audio device from there.
I've recently bought a HP Pavilion 15-n252sq laptop, with Free Dos - unfortunately I can't install Windows 7 over it, due to the following error I keep receiveing in the Installation screen:
"Select the driver to be installed" - and regardless of the paths I have and the available folders, I can not seem to proceed wtih the W7 installation.
Please notice that, I've tried to use both a W7 DVD and also a bootable USB drive (and yes, connected in the USB 2.0 port and not USB 3.0 ) - but I always get to the same point where I have to select drivers.
Please also notice that the BIOS doesn't allow me to make any modifications except for some minor ones (like select boot priority, or enable USB 3.0), as the rest of the MAIN features are greyed out .
Can anyone please help me with this issue?
You may have to use a program Like KillDisk to reformat the drive. Then try installing your Win 7 DVD.
I am writing because from few weeks I can not solve this problem of connection:
if the computer is in safe mode there aren't problems, while in normal mode, the following programs don't connect / update:
Internet Explorer 11, Dropbox, Malwarebytes, Mozilla Thunderbird, Flash player update, Java update, StartUp Delayer.
While Firefox, Chrome, Emsisoft Anti-Malware (Antivirus), Online Armor (firewall), and other programs work and update normally.
I've tried and tried various "solutions" found in the Web and in the Forums, but without any result.
I noticed that Dropbox and StartUp Delayer "tell" me that's is probably a Proxy problem.
I honestly have never used a proxy, and tried in every way possible to disable any proxy, but nothing changed, same issue.
I tried uninstalling antivirus and firewall, but the issue still remain, the same as resetting the connection settings and even Windows Firewall (which is usually disabled).
This problem is present both with ethernet connection and wireless.
I use a HP dv6000 notebook with Windows Professional 64bit.
I thank you if you can help me, because I really don't know how to fix this problem =/
I MIRACULOUSLY solved this situation!
Among the many details I forgot to say that for the connection I use a router, and after several attempts to copy the settings from a computer connected to the same network, I tried to enter the DNS entry of the parameter TCP/IPv4 (in connection properties) 192.168.1.1 and 192.168.1.7 ..and all began to work perfectly.
I can not explain, howeve, why the other computer works even without these two values.
But I'm happy that this (strange) situation is solved, and hope this can help someone else
Have a nice day,
I bought a new machine, basically to work with VM Workstation, but I'm wanting to know if there is more to this machine by tweaking it or should I just leave it as it is?
I would leave it as is, there is no reason to have that much extra performance on the chip if your doing VM workstation stuff. You can overclock it if you want so long as you have a decent cooler attached, but I do not see a reason for you to do it.
As the topic says, my computer doesn't detect my on-board sound card. It all started when I tried to install new audio drivers from manufacturers page, but the next day when I booted PC up there were no sound. In Device Manager, under Sounds, game,.. controllers tab sit 4-5 High Definition Audio Devices. Here's pic:
Then tried re-installing original audio drivers from motherboard CD, enabling/disabling On-Board HD Audio in BIOS but still no luck.
My Audio Device is VIA VT1705.
DxDiag shows that no sound card was found.
This is what is shown in Playback Devices tab:
But I have no HDMI kind audio devices..
How to make my system recognize my sound card?
I would like to ask anyone about these processors because I want to build my own PC for office needs editing and I don't know where to start I wanted also a triple monitor setup so I can manage my editing :3 don't know what specs to choose everything can someone help me any suggestions will be great helpThanks
To start: Do you have a budget in mind for this build? If so how much can you spend? What Software will you be using for editing? Do you need help on building the whole system or just which processor to choose?
Both AMD and Intel have positives and negatives. We here can help you as much as possible, but you have to give us some more information first.
I recently built this computer see other a thread on building a PC using Windows on a ssd drive and I used my sata drives for storage audio video The other drives folders using Can't 7 storage create Windows on drives are from my old system and they were set up for RAID I re-formatted the drives but now they automatically create a system info folder and a recycle bin folder I don t know why but Can't create folders on storage drives using Windows 7 I can t create a folder on these drives They are patitioned NTFS Does this have something to do with the RAID configuration from my old system I need to create folders to manage my projects but it will not allow it Also I installed Norton on the system I am using the internet for downloading programs I need once everything is going smooth I will no longer access the web with this PC The Norton has an error on it and when I try to fix it it gets stuck on trying to optimize the storage disk E My SSD is drive C with a partition D for B U the next drive is E Does anyone know what I am doing wrong Thanks to anyone who can speak to this problem nbsp
Which RAID Configuration are you in? I think you may have have it set up incorrectly. Depending on what RAID you are using will depend on how your drives can be used. Let us know what RAID you are running which you should be able to find this in your RAID control panel when you boot into it. Thanks.
Just signed up although I have been following these forums for a few weeks now
Just after some advice. Basically I have the FX-8350 but I'm looking at switching to Intel (specifically the 4770k) as I've been told it's better for the GPUs I have, currently running dual-290x setup. Someone said the 8350 causes a lot of bottlenecking and that I would get a lot more out of them if I switched to the 4770k? Can anyone attest to that?
The 8350 is more than enough. The i7 could gain you a few frames per second (FPS) depending on the game (somewhere from 5 FPS to as much as 15 FPS). I would keep the 8350 until more attractive CPU options come out like Haswell-E or the next generation of AMD FX CPUs or even the 5th generation of Intel's i7.
The reason I am saying this is because the 8350, while it may not perform as well as the 4770K (not by much), the 8350 completely serves your needs and there is no need to upgrade to a 4770K at this moment since it wont bring you that much of an improvement.
I hope this helps.
We need to restrict several Windows 7 (32) desktops with staff, Server 2003 really does not have anything, same as Win7 GPEDIT, seems to be all or nothing, however,
From the Windows 7 desktop:
- Windows 7 Explorer
- Go to the DVD\CD
- Right-Click Properties
- Advanced Sharing
- ?Share this?
- Add Domain (User1, User2, Etc) or create a Domain group ?AllowWin7CD? and add user to this,
- Remove default ?Everyone?
Anyone see a security or problem with this? Simply sharing as a network resource and assigning domain rights.
Just bought thermal take challenger ultimate keyboard and having a problem when when I plugin the keyboard it override the windows sound and goes off, tried with 2 pcs win 7 and win 8 same thing no sound
want a solution
Got the same problem..
Hello I got a weird one for you guys and I literally have tried everything can think of so I am hoping someone has some new fresh ideas I have a Dell Latitude E that can no longer connect via wired or wireless connections Both adapters display yellow exclamation marks next to them and in the properties of both adapters says Windows cannot install because the drivers are not recognized Error Both adapters are also missing from the adapter page in network settings I have download the most recent versions of the driver and installed no luck I have downloaded previous version of the driver from dell and installed no luck I download the driver directly from Intel and installed no luck Tried a BIOS update nothing Tried to reset to defaults nothing So I decided I would rebuild the is one Windows 31, not NICs weird Error this working 7 machine and SURPRISE that worked for a week and then the problem started again So my first thought is well maybe its a bad motherboard so I swapped the HDD with another Dell E boot it up and NICs not working Windows 7 Error 31, this one is weird both connections are working In the laptop with the drive from the bad laptop it can no longer connect now so the problem is related to windows and follows the drive Does anybody have any idea whats happening hear I am all tapped out of ideas Thanks let me know if you need any additional info Dell E Windows Enterprise auretsky vailresorts com nbsp
"so the problem is related to windows and follows the drive"... Re-install Windows on this drive. Error 31 relates to a bad driver that may be reflected in the device manager
MY WD 500GB USB HD just yesterday stopped working normally, it was working fine two days ago. When I connect the drive via USB it appears as a different drive letter for some reason Local Disk : I then disappears. My laptop makes two noises one that I've connected a device to the laptop then another noise which is when I disconnect a device. It makes this connection/disconnection noise when the HD is plugged in numerous times every minute or so.
The HD doesn't appear in windows explorer but appears in devices.
Very strange and unusual any ideas?
Can anyone assist??
Sorry if it s the wrong section Hi guys I have a problem with my new keyboard I am running Windows and I ve tried on other computer on windows The quot Fn quot key doesn t work On the box it s says the keyboard comes with shorcuts like Fn F Computer If I try a quot test key program quot it doesn t seem to recognize it Please tell me what to do My keyboard I think it s a no-name keybaord quot digittex quot I could not find any drivers for it Please help Take a look at this pic http gyazo com b c a bb ec bcc ee on FN problem Windows 8.1 key d e png That is my keyboard - gt Shows that I have a quot Media quot button I also have play pause volume down and volume up All that are working - gt You can see the images of quot Internet Explorer Favorite Search - gt The windows doesn t recongnize the quot Fn quot key so I cannot acces the keyboard quot shorcuts quot Take a look at this FN key problem on Windows 8.1 pic too http gyazo com eae a f d fbf fb e png That s what it says on the box - gt You can see quot FN quot amp - gt You can see what it supposed to do Ex FN F My Computer Help me please nbsp