Windows Support Forum

My Keyboard doesn't work, and the computer turns on but doesn't start.

Q: My Keyboard doesn't work, and the computer turns on but doesn't start.

For the last month or so, every time I log off my account, the keyboard does not register at the Windows Log In screen. This makes it so I have to restart the computer and then it works fine.
There are three accounts on the computer, the casing has been half removed for the last 3 months, a DVD burner and driver recently installed 3 months ago and I am using a wireless off brand USB keyboard and mouse.
OS: Windows Xp Home Edition 5.1.2600 Service Pack 3
As for the second part, the computer requires several restarts to boot up, sometimes up to twenty minutes of turning on and off to boot up. Only started doing this a week ago.

Relevancy 100%
Preferred Solution: My Keyboard doesn't work, and the computer turns on but doesn't start.

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: My Keyboard doesn't work, and the computer turns on but doesn't start.

It sounds like something is wrong with your Windows XP drivers. Something like that happened to me while building my computer, and when I boot up the keyboard did not work because my copy of windows XP was bad. You could try reinstalling windows XP, and It might work better, but I dont have a definite answer to your problem.

http://www.techsupportforum.com/forums/f10/my-keyboard-doesnt-work-and-the-computer-turns-on-but-doesnt-start-381732.html
Relevancy 13.33%

After going through lots of programs and cleaning out an infection, I restarted it and it is almost totally unusable. I can confirm that both mouse and keyboard work, mouse light is on, and keyboard lets me open the calculator. Any help please? Thanks.
 

A:Can't move my mouse, but computer is not frozen

If the mouse is USB (not a PS/2 connection), try disconnecting and then reconnecting. You could also try a different USB port for the mouse.
 

http://www.techspot.com/community/topics/cant-move-my-mouse-but-computer-is-not-frozen.183253/
Relevancy 13.33%

Hi, I have decided to buy a new computer(or the parts for one).
It will be the first time I assemble one so I would like a little
help from the people on here that has some experaince with computer hardware,
because I myself do not know very much about it.

I have done some research and this is what I came up with:
Motherboard : Asus Z97-A Intel Z97 4xDDR3 SLI CrossFireX Socket 1150 ATX
CPU : Intel Core i5-4460 3.2GHz Socket 1150
RAM : Crucial Ballistix Sport DDR3 DIMM PC12800/1600MHz CL9 2x4GB
GPU : Gigabyte GeForce GTX 750Ti OC 2GB D
PSU : CORSAIR PSU 550W VS550
Hard Drive : Western Digital WD20E, 2TB, SATA 6 Gb/s, 3.5", IntelliPower, 64MB

What I want to know is if all these parts will fit together and if it is a good
computer? I want a fast computer thats good at a bit of everything. What I will be using it for mostly is programming, games like bfbc2, downloading/watching movies/tv series and just browse the internet.

And I think I will be using mint as my os(still new to linux).
 

A:Assembling a computer for the first time

I think those are great choices.
 

http://www.techspot.com/community/topics/assembling-a-computer-for-the-first-time.217526/
Relevancy 13.33%

I just bought these I will return them if need be so don t pamper me http www newegg com Product Product aspx Item N E Question one these Questions about computer speakers speakers plug into my old jack front speaker port on my mobo should I use the center sub-woofer port instead Should I have bought some kind of HDMI or SDPIF speakers instead If so how much better are they My video card nvidia has extra hdmi ports my Questions about computer speakers mobo has a spdif port Should I buy sound card speaker combo Is my mobo and or video card just as good as a good sound card Should I download some software to compliment my new speakers Do I need to change any settings on my computer to take advantage of them In the control panel should I up the quot quality quot from bit hz studio Virturilze sound Boost enhance Will loudness equalization hurt my coolness nvidia g gaming http www newegg com Product Produ e nvidia g gaming- - - - - -Product Mobo z m pro http www newegg com Product Produ amp cm re z m pro - - - - - -Product p s my old speakers were like years old I don t even see where to adjust the bass p s s I use my speakers for music and gaming ps was trying to spend on a speaker upgrade flac is wow nbsp

http://www.techspot.com/community/topics/questions-about-computer-speakers.217390/
Relevancy 19.78%

Logitech has unveiled a new high-end gaming keyboard equipped with the company's own Romer-G mechanical switches. Officially known as the Logitech G310 Atlas Dawn Compact Mechanical Gaming Keyboard, it appears to be a direct descendant of the G910 Orion Spark...

Read more
 

A:Logitech G announces G310 Atlas Dawn mechanical gaming keyboard with in-house Romer-G switches

Has a great design.
 

http://www.techspot.com/community/topics/logitech-g-announces-g310-atlas-dawn-mechanical-gaming-keyboard-with-in-house-romer-g-switches.216921/
Relevancy 19.35%

Hello I am new to building the pcs so I am afraid I may have fried mine I really am pry I did not but this is what happened I finish tower Power will not work button My the pc and My tower Power button will not work when I turned on the power supply the power button on the motherboard glowed so then I pressed my tower button and nothing worked so then I re setup he F PANEL cords u know the pwr switch and all that jazz turns out it was set up wrong so I put them in right and tried to turn on the computer again the power button on the motherboard turns on but not my towers power button and so my pc will not officially turn on I am guessing and I am worried that I may have fryed my pc because when I took out the f panlle cords I realized my pc was still on and turned it off immanently and I am afraid that may have fryed the motherboard if anyone can help me it would be wonderful I am freaking out and have no Idea what the problem thank you for reading P S My tower button does not making a clicking sound when you push it I am not sure if that normal or it is broken or somthing it just doesnt make any click sounds nbsp

A:My tower Power button will not work

You could have a defective power switch on the PC case. Test this by using the reset switch as a temporary power switch. The power switch and the reset switch are the same for practical purposes except, of course, the size of the button (on most cases). If the reset switch works and is able to start the PC, then you know the power switch is defective.
 

http://www.techspot.com/community/topics/my-tower-power-button-will-not-work.203422/
Relevancy 19.35%

I recently bought a Windows DVD to put it on the new PC I'm building for my mom. That PC has troubles with the DVD drive itself (stupid motherboard doesn't have IDE..), so I figured I'd set up a bootable USB to install Windows before the adapter arrives. Problem is, the installation DVD isn't playing on my drive (I tried another DVD with a movie on it before, so I don't think its my drive). I brought it to a PC shop and for them it worked fine, even though its quite scratched on the back (I guess the person selling those DVDs doesn't know how to ship them properly) I didn't wanna pay 20 bucks for them copying the DVD, even though I'll probably end up having to do that.

Any ideas what the problem is, or what I can do? I'm not sure if the DVD will work in my moms drive either..
 

http://www.techspot.com/community/topics/dvd-works-with-other-drives-but-not-mine-while-other-dvds-work.216661/
Relevancy 18.92%

I have an Aspire one NAV50 with Windows 7 starter.

One time, when I turned it on, The icon for wireless connection doesn't appear anymore. Every time I try troubleshoot it, it would just say that there is an ethernet cable unplugged. And so, I connected it into the ethernet cable and it works fine. But when I tried it again on the wireless connections, it doesn't locate to any wireless connection.

I've tried the ff on my laptop:

restart
update
scan the laptop with MalwareBytes
Fn+f2
by the way, last night, when I turned on again the laptop, the wireless connections can already be found. However, after few minutes, it went back to being unlocated again.
 

A:Laptop would work on ethernet cable not on Wireless Connections

I had doubt the Starter supports the Wireless connecting but since you say " the wireless connections can already be found.", so probably it's possible.
In this case and at the moment the thing I'm thinking about is the driver. Try to update its driver for wireless connecting. (You've said the 'update', but update of what?).
 

http://www.techspot.com/community/topics/laptop-would-work-on-ethernet-cable-not-on-wireless-connections.201158/
Relevancy 19.35%

hi there my wireless through cable work will not My only ethernet internet internet was My internet will only work through ethernet cable not wireless running fine until yesterday when I tried to connect to the internet the message quot windows can t communicate with the device or resource primary dns server quot came up I followed all methods on this website http answers microsoft com en-us w -b d ec fae but none of them worked for me I then returned my laptop to factory settings in the hope it will work but that didnt not work I then realised it works through the ethernet cable but not wireless I ran ipconfig all with my ethernet cable in and this is the result SOMEONE PLEASE HELP ME THANKYOU Windows IP Configuration Host Name Nida-TOSH Primary Dns Suffix Node Type Hybrid IP Routing Enabled No WINS Proxy Enabled No Wireless LAN adapter Wireless Network Connection Connection-specific DNS Suffix Description Realtek RTL CE Wireless LAN n PC I-E NIC Physical Address D -DF- A-EB- -B DHCP Enabled Yes Autoconfiguration Enabled Yes Link-local IPv Address fe d fccc e c eb Preferred IPv Address Preferred Subnet Mask Lease Obtained October Lease Expires October Default Gateway DHCP Server DHCPv IAID DHCPv Client DUID - - - - -EB- A- A-B - -F -D - -E DNS Servers NetBIOS over Tcpip Enabled Ethernet adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description Realtek PCIe FE Family Controller Physical Address B - -F -D - -EF DHCP Enabled Yes Autoconfiguration Enabled Yes Tunnel adapter isatap EEB-B - C-AC - CEB F Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter Local Area Connection Connection-specific DNS Suffix Description Teredo Tunneling Pseudo-Interface Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes IPv Address ef fb affc eb Pre erred Link-local IPv Address fe affc eb Preferred Default Gateway NetBIOS over Tcpip Disabled Tunnel adapter isatap DF D AB- BF- FA - CB -DFA C Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes nbsp

A:My internet will only work through ethernet cable not wireless

There may be an issue on the ISP side or router side since restoring to defaults didnt help. Or it could be an issue with the network adapter. Or it could be an issue with the firewall.

Try downloading running these tools (download via ethernet, run on wireless): Network Fix-It Tool (right click on the internet bars on the task bar in the bottom right hand side of the screen, and click "troubleshoot network...") and Firewall Fix-It Tool.

Did you install anything on your PC before this happened? Did Windows install any updates?

Try disabling your AntiVirus. That may be the issue. I doubt it though.

Tell me if any of these solutions help.
 

http://www.techspot.com/community/topics/my-internet-will-only-work-through-ethernet-cable-not-wireless.197067/
Relevancy 18.92%

Hey guys,

I have a Sony Vaio VPCEH15EN laptop & the OS is Windows 7 home basic. I have a wifi router which is of TPLINK.

The wifi won't connect to my laptop but it works fine on my mobile..it would only start working when I use the ethernet cable. I never had this problem before. I have tried everything ..I also tried the winsockfix.bat but all my efforts have gone in vain..I just don't know if the wifi router is faulty or the modem of my ISP...Please help me solve this problem.

Best Regards,
Om
 

A:Wifi on my laptop won't work but works when I use the ethernet cable

I have solved the problem by myself. To do this, first you have to disconnect your Ethernet cable from your laptop and follow the steps: Start>Control Panel>Network and Sharing Center>Manage Wireless Networks and remove all wireless connections by right click on it and select Remove network from the drop down menu. After doing this, close the windows and scan for the Wi-Fi networks. Click on the available network and select connect. After a while, you will be asked to give a password for your Wi-Fi connection. Type the password and click on connect button. And now will be connected to your Wi-Fi network via wireless.

May be it will help you.
Regards
MD. MAHMUDUL HASAN
 

http://www.techspot.com/community/topics/wifi-on-my-laptop-wont-work-but-works-when-i-use-the-ethernet-cable.200754/
Relevancy 18.92%

Hi! I don't know much about this place but there's a problem with my laptop and I don't know how to solve it. My laptop won't connect to the wifi anymore but it works perfectly fine with the ethernet cable. I appreciate it very much if you tech geniuses could help me out. THANK YOU!
 

A:My WiFi on my laptop won't work but works with Ethernet cable

Are there any yellow (!) in the device manager?
 

http://www.techspot.com/community/topics/my-wifi-on-my-laptop-wont-work-but-works-with-ethernet-cable.206652/
Relevancy 13.76%

Memory is a key component in any computer and without a sufficient amount on tap, the entire system will feel sluggish regardless of what other beefy hardware you might be running.

Read more
 

A:How much RAM is in your computer?

16GB... Because I love keeping numerous Chrome tabs open.
 

http://www.techspot.com/community/topics/how-much-ram-is-in-your-computer.213529/
Relevancy 61.49%

Hi guys I ve been researching and trying to days to get this to work with no avail so I decided to post here for some help as doesn't Ethernet connected Wifi work cable. using working when only Internet I see this community is really active We ve got different laptops here and none of them can connect to the wifi anymore it suddenly stopped working for the last whole week We can connect to the internet through ethernet cables though We only use one at a time if ethernet then wireless is disabled and vice versa Here is a copy of the ipconfig all Windows IP Configuration Host Name PeterMai-HP Primary Dns Suffix Node Type Hybrid IP Internet only working when connected using Ethernet cable. Wifi doesn't work Routing Enabled No WINS Proxy Enabled No DNS Suffix Search List moolahd local Ethernet adapter Local Area Connection Connection-specific DNS Suffix moolahd local Description Realtek PCIe GBE Family Controller Physical Address AC- - D- B-ED-F DHCP Enabled Yes Autoconfiguration Enabled Yes Link-local IPv Address fe ac a d b Preferred IPv Address Preferred Subnet Mask Lease Obtained Monday October PM Lease Expires Tuesday October PM Default Gateway DHCP Server DHCPv IAID DHCPv Client DUID - - - - - -FB- -AC- - D- B-ED-F DNS Servers Primary WINS Server NetBIOS over Tcpip Enabled Wireless LAN adapter Wireless Network Connection Connection-specific DNS Suffix Description Broadcom GN b g n x Wi-Fi Ada pter Physical Address -ED-B - D- -FD DHCP Enabled Yes Autoconfiguration Enabled Yes Link-local IPv Address fe c f e e b fc f Preferred Autoconfiguration IPv Address Preferred Subnet Mask Default Gateway DHCPv IAID DHCPv Client DUID - - - - - -FB- -AC- - D- B-ED-F DNS Servers fec ffff fec ffff fec ffff NetBIOS over Tcpip Enabled Tunnel adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description Microsoft to Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter isatap optusnet com au Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter isatap moolahd local Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter Reusable ISATAP Interface CE FC E - F - C C- D - D EBEC Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter isatap DDFAF D- B- -AA A-DBE BA F Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter Reusable ISATAP Interface E ED - - A -BB -FB FA F F Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes And here is a copy of the route print Interface List ac d b ed f Realtek PCIe GBE Family Controller ed b d fd Broadcom GN b g n x Wi-Fi Adapter Software Loopback Interface e Microsoft to Adapter e Microsoft ISATAP Adapter e Microsoft ISATAP Adapter e Microsoft ISATAP Adapter e Microsoft ISATAP Adapter e Microsoft ISATAP Adapter e Microsoft ISATAP Adapter e Microsoft ISATAP Adapter IPv Route Table Active Routes Network Destination Netmask Gateway Interface Metric O... Read more

A:Internet only working when connected using Ethernet cable. Wifi doesn't work

You have an IP on your LAN, but none on your wifi. Check your router to make sure DHCP for wifi is turned on and you have enough available addresses.
 

http://www.techspot.com/community/topics/internet-only-working-when-connected-using-ethernet-cable-wifi-doesnt-work.197081/
Relevancy 33.97%

Just checking it seems like something is not wife's on this - my Keyboard - - found disabled getting computer of EPP tired still wrong on this computer just using a standard plain usb keyboard All of a sudden this morning when she was changing a plain ordinary mouse the keyboard quit working it works on Keyboard not found - EPP - disabled - getting tired of this on my wife's computer another computer the mouse works while using the same usb port in device manager there is no entry for Keyboard in devices and printers way down at the bottom a quot usb multimedia quot keyboard shows but when I try to look at the drivers there are several drivers and I cannot delete or disable any Looking at the HID compliant consumer control device driver details there are no drivers Device Manager Keyboard shows keyboard there are speed settings but in the hardware tab no name manufacturer location or device status Just in case with all of the problem we have had lately I did some scans the dss scan seems strange Is it mbam Windows Service Pack x NTFS Internet Explorer Motherboard FOXCONN Keyboard not found - EPP - disabled - getting tired of this on my wife's computer AB Processor AMD Phenom tm II X T Processor CPU mhz Disk Partitions C is FIXED NTFS - GiB total GiB free D is FIXED NTFS - GiB total GiB free E is CDROM F is Removable G is Removable H is Removable I is Removable J is Removable K is CDROM M is NetworkDisk NTFS - GiB total GiB free P is NetworkDisk NTFS - GiB total GiB free R is NetworkDisk NTFS - GiB total GiB free S is NetworkDisk NTFS - GiB total GiB free T is NetworkDisk NTFS - GiB total GiB free Something is rotten in Denmark nbsp

A:Keyboard not found - EPP - disabled - getting tired of this on my wife's computer

Some place I saw a message that windows updates was set to no update hareware files, but I can't find where to change that.
 

http://www.techspot.com/community/topics/keyboard-not-found-epp-disabled-getting-tired-of-this-on-my-wifes-computer.191043/
Relevancy 28.81%

Hi, my name's Ashley.

Basically, when I turn my computer on and press delete to go into my bios settings, this comes up


When I turn the computer on, I press delete and go into my BIOS settings, it starts off at about 40 degrees then shoots up to 60-70, it stays there for a while but slowly goes up to 80, then turns off.

It's also saying that I have only 1 fan active (on this screen) when I actually have 4 other external ones that are working perfectly fine. I don't know whether to replace the thermal paste, CPU, PSU, heat sink or the entire motherboard. I'm stuck. Please help.

Kind regards

Ashley
 

A:CPU Temperature idling at 65°, rises to 80° then turns off

I would first replace the thermal paste. If that doesn't help then get a different heatsink. Any dust build-up?
 

http://www.techspot.com/community/topics/cpu-temperature-idling-at-65%C2%B0-rises-to-80%C2%B0-then-turns-off.216113/
Relevancy 18.06%

I have a dell latitude e6510 that won't start up. When I push the power button, the cooling fan starts up, several of the lights on the case come on for about five seconds (hdd and power) and then the whole thing powers down.
Anyone have any ideas?
Any help greatly appreciated!
 

A:Dell Latitude E6510 will not start up

Have you tried a hard start. Disconnect the battery and power cord. Then hold down the power button for about 30 seconds. Then try reconnecting the battery or the power plug and see if it will start. If this dose not work you might what to post your computer or laptops Model and make plus your systems specs.
 

http://www.techspot.com/community/topics/dell-latitude-e6510-will-not-start-up.183347/
Relevancy 21.93%

Can you even get a good one for under 50$? I haven't used ones since the junior high but a lot of people have told me they work a way better. I do a lot of typing for work and I also game. My current keyboard is winding down.
 

A:Good mechanical keyboard for under $50?

"Good" and "cheap" don't typically go together very often. There are certainly a lot of good lower end choices in the keyboard market, but a quality mechanical keyboard from Corsair for instance is around $100. The cheaper you go, the poorer the quality will be. If you don't mind buying a used one, you might check eBay and could probably nab a K70 - for around your price range. I use a Corsair red LED backlight K70 (w/cherry red switches) and its the best keyboard I've ever used. Love it!!! Once you try mechanical, you'll never go back.
 

http://www.techspot.com/community/topics/good-mechanical-keyboard-for-under-50.216237/
Relevancy 12.9%

I have scoured the internet for months, and I couldn't find anything. I even checked an old article from this website, which didnt help. I have tried most obvious things, such as disabling stereo mix, though and help at all is accepted because you never know. Thanks.
 

http://www.techspot.com/community/topics/turtle-beack-x12-replaying-computer-sounds.216239/
Relevancy 21.5%

Hi e1! my keyboard is going crazy, I spilled my drink and hitted the arrow keys by accident, they started to work backwords so I tried fixing them by removing the buttons and cleaning underneath.
But once I replaced the buttons the whole keyboard started to work funny, certain keys dont work and others are running randomly... Please HELP!!!
Thank you.
PS: I have a HP pavillion g series laptop.
Sorry for my bad english.
 

A:Keyboard going crazy after spilling my drink

Your keyboard may still have some moisture. How much time have you allowed for it to dry out? I've heard that a blow dryer at the lowest possible setting will sometimes do the trick in the case of moisture, but it'd take a while and you would have to be very careful as too much heat will damage the electronics. I'm not too sure about this fix, though. Taking a blow dryer to a laptop does sound a bit risky. How did you clean your keyboard? Did you use any cleaning fluids?

I don't mean to get you down, but since it's a laptop we're talking about here -- and granting that you've allowed it ample time to dry out , then I think you will probably need to have the keyboard replaced. Do not let that stop you from doing further research on a possible remedy, though.
 

http://www.techspot.com/community/topics/keyboard-going-crazy-after-spilling-my-drink.186609/
Relevancy 19.78%

Hey guys... I just got a new EVGA GTX650 ti boost superclocked. I just put it in and I was not getting any signal to my monitor. I tried VGA, HDMI and DVI. Nothing worked and when I took it out to try booting with my integrated graphics, I didn't get any signal to my monitor. All of my connections and wires are connected properly, my power supply is the right voltage and has enough power to support my graphics card. My hard drives are spinning but I cant access my BIOS. I have tried everything that is common. I know my graphics card is not defective and im thinking that it might be my motherboard. Any suggestions?
 

A:My integrated graphics won't work

You were using integrated graphics before the discrete card? It's strange that your onboard isn't working if it was before hand. Usually it's just a overlooked cable or something plugged in the wrong place. Did you make any changes to BIOS? Some boards require you to change the primary display adapter to PCIE or onboard. Maybe a BIOS reset will help the situation. I doubt there is any issues with the MOBO itself. I suggest stripping the build down to nothing but the bear essential components for operation. This way you can isolate the issue a lot easier.
 

http://www.techspot.com/community/topics/my-integrated-graphics-wont-work.194322/
Relevancy 44.72%

Hi every one
I need your help gays
I saved some files in my USB but when I explore my USB the files are not appear
it shows that usb is empty
I do not know what to do
thanks
 

A:USB drive doesn't show my files

Have you tried the same USB on a different pc? If not, do so.
 

http://www.techspot.com/community/topics/usb-drive-doesnt-show-my-files.187106/
Relevancy 13.33%

Hello I have a tower just recently bought all the parts from newegg and was building the tower for the last days I had everything put in as it should be and initially it stayed on but no image was portraying problems up boot Building computer on the monitor A friend explained I was using the wrong port to portray image as it should be through the video card I should be connecting it but after troubleshooting the problem Building computer boot up problems initially I removed RAM and put it back in but computer now turns on for a second then right off I hear and see the fans running the dvd drive spinning and the lights go on but then it shuts right off after another - seconds it turns on again and then after another second turns right back off in an endless cycle until I turn it off completely and unplug it Not sure what the next steps are or if I should return the moba for an exchange After reading a lot of forums I noticed that it could be the RAM was improperly placed so I tried many times to take it out and put it back in but same problem keeps occurring I hear no beeps and only hear a click from the power supply when it goes on I tried the psu tester on the power supply and it tells me it should be working fine Any one have any idea moba ASRock Z M Pro Micro ATX Intel Motherboard ram CORSAIR Vengeance GB x GB -Pin DDR SDRAM DDR PC Desktop Memory Model CMZ GX M A C B power EVGA -G - -XR W Power Supply case Thermaltake Level Series Level GT VN W N Black Computer Case processor Intel Core i - K GHz LGA BX I K Desktop Processor video card EVGA GeForce GTX Ti G-P - -KR FTW w ACX Cooling Video Card Please someone help and thanks to all nbsp

A:Building computer boot up problems

Okay, I've had the same issue with a new build: Put it all together, switch on the power and basically nothing. Do the following tried and true diagnostic steps that can be tedious but costs nothing to do and can often zero in on your issue:

1. Uninstall everything from your motherboard and disconnect all peripherals from your power supply except psu to motherboard, cpu, and one stick of RAM. Now turn it on. If it boots up and stays booted then shut it down and then...

2. Add your second stick of memory -- nothing else. Repeat by booting up and if it stays booted up then...

3. Start adding one piece of hardware at a time and repeat as directed.

What are your findings?
 

http://www.techspot.com/community/topics/building-computer-boot-up-problems.215853/
Relevancy 12.9%

I heard there's some certification to mount ESD safe equipment (ESD mats, etc) at computer workshops and other ESD safe environments. Could I get this certification myself in London? Is it expensive?
 

A:Is there some certification to mount ESD safe equipment at computer workshops, etc?

See https://www.esda.org/
OR domestic (U.S) http://www.dekra-certification.us/en/electrostatic-discharge-esd
 

http://www.techspot.com/community/topics/is-there-some-certification-to-mount-esd-safe-equipment-at-computer-workshops-etc.214706/
Relevancy 12.9%

So I'm building a coomputer for my first time and have already selected parts that I think would be good. Not sure though as this is all new to me, but basically I just want a good computer capable of running a flight simulator in high quality graphics. So I just want to make sure that everything is compatable with each other, and if you have a part that would be better than what I have listed, please recommend. The list of parts I have come up with are as follows:

Case: Xigmatek Soundwave ATX Mid Tower

Power Supply: Cool Power Performance CP P600 204 pin ATX Power Supply w SATA PCIe & Dual 12V Rails

Mobo: MSI ATX DDR3 2133 Motherboard 970 Gaming

CPU: AMD FX 4350 Unlocked Quad Core Processor 4.2 4

RAM: Corsair Vengeance 8gb (2 x 4gb) DDR3 1600 MHz PC3 12800 240-Pin DDR3 Dual Channel Memory Kit

Optical Drive: Asus 24x DVD-RW Serial-ATA Internal OEM

Audio Drive: Asus Xonar DG Headphone Amp & PCI 5.1 Audio Card

Video Card: MSI GTX 960 Gaming 4G

Hard Drive: Western Digital Caviar Blue 500gb SATA III 7200 RPM 16mb Cache Bulk/OEM

Then I will be installing Windows 7 Home Premium.

Thanks Guys!
 

A:Are these parts sufficient for a decent gaming computer?

Give us your budget.
 

http://www.techspot.com/community/topics/are-these-parts-sufficient-for-a-decent-gaming-computer.214561/
Relevancy 19.78%

I am considering purchasing a MSI ATX DDR3 2133 Motherboard 970 for my new computer build, and heard from somewhere that it is not compatable with windows 7? Is this true?
 

A:Will my mobo work?

Where did you hear that? It will run Windows 7 just fine.
 

http://www.techspot.com/community/topics/will-my-mobo-work.214529/
Relevancy 21.93%

Hello guys,

I have ASUSTeK COMPUTER INC. H81-PLUS mobo in my desktop PC. I looked the menus of the BIOS but didn't find some option for turning the system on by pressing a key on keyboard. Has my mobo such an option? If yes, which menu please?

Thanks.
 

A:Turning the PC by keyboard

Press the space bar/mouse button for standby and the power button for hibernation.
 

http://www.techspot.com/community/topics/turning-the-pc-by-keyboard.213889/
Relevancy 21.93%

I have a keyboard that has been working fine last night then this morning this happened:

When I type o it types o+ and when I type l it types l and enter (the key)
So this makes it extremely hard to get anything done, please help, thanks
 

A:Keyboard problems

How old is the keyboard? Sometimes "gunk" gets built up under the keys and can cause the keyboard to start failing. Have you tries to remove the keys (or take the keyboard apart) and properly clean it? There are plenty of tutorials (video and non-video) available if you are unsure of how to clean a keyboard.
Regular cleaning on all computer parts will extend the life of those parts.
 

http://www.techspot.com/community/topics/keyboard-problems.213578/
Relevancy 21.07%

HP G62-b80SS laptop
Many keys in the keyboard aren't working. I've successfully replaced the motherboard for this laptop because it went dead because of some dampness trickling going inside and is now otherwise working fine. It's been abandoned for 7 months. I've reseated the keyboard connector and cleaned it with a contact cleaner.
I guess I need to get a new keyboard, am I right?
Thanks!
 

A:Many keys in keyboard not working HP G62-b80SS laptop

Or the motherboard keyboard connector is damages by corrosion...
 

http://www.techspot.com/community/topics/many-keys-in-keyboard-not-working-hp-g62-b80ss-laptop.213407/
Relevancy 13.33%

ASUS ROG G751JY-DH72X Intel i7 2.40GHz 32GB Memory 512GB SSD GTX 980M 4GB Laptop

Windows 8.1
Intel Core i7 4860HQ 2.4GHz
32GB Memory 1TB HDD 512GB SSD
NVIDIA GeForce GTX 980M 4GB
17.3-inch (1920 x 1080)
Retail Price:
$2,999.00
Price:
$2,749.00
 

A:Is the CPU good on this computer for gaming?

I'd say it's a good CPU, but note that you won't be able to upgrade it in the future as it is soldered onto the motherboard.
 

http://www.techspot.com/community/topics/is-the-cpu-good-on-this-computer-for-gaming.213433/
Relevancy 43.86%

Hi all,

My friend's USB flash memory has data (its drive shows that there is data in it) but when I double click on it to open it and see the contents, it doesn't show any folders and files! I did the following works:

1- I scanned it by my updated kaspersky AV. but no threat found
2- Scanned by windows defender tool. same result!
3- scanned by malwarebytes anti-malware. same.
4- cmd (run as administrator) -> go to its drive (e.g., H:, when H is my flash drive) and typing the attarib -s -h *.* /s /d command. It could not to show the data.

All my attempts faced failure till now.

Can anyone help me please?
 

A:USB flash memory has data but doesn't show the contents

Salam
Go to cmd (run as administrator) -> go to its drive (e.g. H: where H is my flash drive) and type the attrib -s -h *.* /s /d
Now flash will show the data.
Your attrib spelling was wrong correct them
Try it.
 

http://www.techspot.com/community/topics/usb-flash-memory-has-data-but-doesnt-show-the-contents.193421/
Relevancy 19.35%

As I don't go menu and Monitor's won't buttons the work away am writing this I have this blue square on the screen with all the settings for this monitor Whichever button I press on the monitor the menu won t go away Not even the power button works so that means I can Monitor's menu won't go away and the buttons don't work t disable Monitor's menu won't go away and the buttons don't work the monitor Unplugging and plugging it back in doesn t work as soon as the picture appears the menu appears Monitor's menu won't go away and the buttons don't work as well Let me give you a bit of a history as it might help determine the cause About a month ago my old monitor monitor started behaving weird It started turning itself off every now and again Sometimes few times a minute Every time it turns off it turns back on with the splash screen saying quot BENQ quot and everything I had no idea why it does that I tried pressing the buttons on it to go into the menu but every button seemed to shut it off and every button seemed to turn it on So I gave it to a family friend to try and fix it He said that the quot control board quot started dying and that he doesn t have a spare one or something like that He then gave me a spare monitor of his monitor until I can buy a new one or fix monitor So I took monitor from him and sent monitor to the shop so they can try and fix it About a week passes and the shop calls and says that they fixed monitor I go and pick it up and when I came home I unplug monitor and plug in monitor monitor was working perfectly then Monitor worked for about minutes and started shutting down again And when I tried using the buttons they wouldn t work again Same thing as last time So I return it to the shop and tell them that it doesn t work That was about a week and a half ago They still didn t fix it The problem is now the monitor also started having problems It doesn t turn off yet but the menu buttons don t work Power button doesn t work Nothing And on top of that the menu won t disappear from the screen As I am typing this there s a menu on top of everything Every now and again the menu will switch to a different option like quot brightness quot quot auto adjustment quot and such like the buttons are being pressed Now I am wondering could it be that my PC is quot breaking quot these monitors Is there a way for a PC to physically damage a monitor What should I do in that case Also I should say that ever since monitor died and after I installed monitor my PC has been getting blue screens of death It hasn t happened once in years since I got this PC and it started after I got monitor I don t know if that s something that s important but there it is If you need more info please let me know I am trying to figure out what is happening and every bit of help is appreciated Thank you nbsp

A:Monitor's menu won't go away and the buttons don't work

No one has any relevant information?
 

http://www.techspot.com/community/topics/monitors-menu-wont-go-away-and-the-buttons-dont-work.212651/
Relevancy 29.24%

Hello its my first post!
Well anyways I just build my first ever pc using tutorials like (Austin Evans) well I build it turned it on, and all the fans would work then right after stop! Sometimes I get one bleep from the psu, What should I do as im really annoyed as I spent hours do this!

thanks
 

A:PC turns on then off (newly build)

Since you say the machine tries to boot, I'll assume the front panel connectors are correctly connected.
Make sure all cards, memory, and cables are properly seated. Including the 4pin/8pin motherboard power connector.
Try a different PSU. I had a PSU go out that acted this way, after an instant shutdown. Yours could be a DOA that acts the same way.
Try a single RAM module at a time. Switch modules if the first one doesn't help.
Try with all unnecessary components disconnected. Any damaged component can keep the PSU from receiving power good status.

 

http://www.techspot.com/community/topics/pc-turns-on-then-off-newly-build.212476/
Relevancy 13.33%

I have a HP Pavilion Elite m9600t CTO Desktop PC that has 2 drives. One which clearly says it can do lightscribe and burning, however, everytime I try to burn a disk using any software(I've tried a couple) it says no drive that can burn was found....

Config Flags 0x00000000
It's kinda driving me crazy to the point where I'm not sure if I'm wrong or its wrong. Here are the drives I have:

Drive 1

Spoiler
ATAPI DVD D DH16D3S
Device ID IDE\CDROMATAPI_DVD_D__DH16D3S____________________SH12____\4&A9C04EF&0&0.1.0
Status 0x0180200a Started
Problem 0x00000000 (0)
Service wd
Capabilities 0x00000000
Class CDROM
Manufacturer (Standard CD-ROM drives)
Drive 2

Spoiler
WJWDG UBKDE3C5U3 SCSI CdRom Device
Device ID SCSI\CDROM&VEN_WJWDG&PROD_UBKDE3C5U3&REV_1.03\5&36E5972&0&000000
Status 0x0180200a Started
Problem 0x00000000 (0)
Service cdrom
Capabilities 0x00000060
Config Flags 0x00000000
Class CDROM
Manufacturer (Standard CD-ROM drives)

 

A:My computer can't burn disks?

They both appear to be ROM drives when reading the spoiler info.

The best I can tell, here is the "ATAPI DVD D DH16D3S" which is a ROM drive.

http://www.newegg.com/Product/Product.aspx?Item=N82E16827106262
I can not find the second listing with the details provided. I'm assuming that is the drive pictured in the screenshot.

HP Pavilion Elite m9600t Desktop PC Product Specifications




Primary Optical Drive

Must select one of the following options:

16X DVD(+/-)R/RW 12X RAM (+/-)R DL LightScribe SATA
Blu-ray player & SuperMulti DVD burner with LightScribe Technology
SuperMulti Blu-ray Disc burner with LightScribe Technology
​Click to expand...

There is lack of detail on HP's site as to which specific drives were used. The drive you pictured is not Blu-ray, so I'll assume the first listed drive is the one you have. The drive may need to pulled out of the case, to find out for sure which unit was used.
 

http://www.techspot.com/community/topics/my-computer-cant-burn-disks.212153/
Relevancy 13.33%

I recently moved my computer from one side of my desk to the other and somehow it managed to make it so when I press the power button nothing happens. I've disassembled and reassembled the computer numerous times and tested the psu. The psu is working and it seems like the motherboard is the culprit. What is confusing me the most is that when I short the 24 pin connector to the motherboard then plug it in if I also press the power button I can turn on the computer. I dont see that as a permanent fix just in case it sleeps and I assume it is not good for the computer so I am looking for help on how to permanently fix my issue. Thanks in advance.
 

http://www.techspot.com/community/topics/computer-will-not-power-on-after-i-moved-it.212377/
Relevancy 21.5%

I have a logik keyboard for pc and this what my keyboard gives instead

q gives `
w opens 'help' box on whatever programme is open
r gives 5
u gives 6
I gives =
p gives -
g gives b
h gives n
; gives '
' gives /

how can this be solved?
 

A:Why is my keyboard typing wrong characters

This might help you out!

How To Fix A Keyboard With Wrong Characters
http://www.wikihow.com/Fix-a-Keyboard-That-Has-the-Wrong-Characters

Good luck and let us all know how the repair job went!
 

http://www.techspot.com/community/topics/why-is-my-keyboard-typing-wrong-characters.184068/
Relevancy 11.61%

I have scoured the from computer, sounds" can speakers "computing my hear my through I internet for a solution to this and have found nothing First my dxdiag is attached I have had this issue for over a year now and I am getting fed up If I put my ear to my pc I can hear computer noises coming from it I can not compare it to another sound as there is nothing else to compare it too it just sounds like my CPU or Hard Drive thinking That doesnt bother me though I expect my computer to make some noise HOWEVER I dont expect to hear it in my speakers too I have a lot of speakers and a lot of headphones no they are not I can hear "computing sounds" from my computer, through my speakers the problem Right now I am using a knappenberger tube hooked up to a GK MB just cuz I can When I plug in any speakers I can hear the CPU sound through them regardless of the volume level I can turn the speaker all the way down and yet the sound will come through This leads me to believe I can hear "computing sounds" from my computer, through my speakers it is a grounding issue or electrical to some degree I would like to try physically grounding my case to see if it would eliminate this God awful feedback However I can not find a guide as to I can hear "computing sounds" from my computer, through my speakers the best way to do this or any other suggestions So here I am Help me and earn my eternal gratitude Some notes If I unplug all of my cables except power and the speaker cable I still hear it if I plug in my speaker cable to my monitor instead of my PC I still hear it Front port still hear it I have yet to try a different sound card as I dont have one Once I find one I will update nbsp

A:I can hear "computing sounds" from my computer, through my speakers

Checked some settings in the Bios, noticed the sound isnt there while navigating it. Static started once windows loaded. Maybe it is some sort of issue with the hard drive
 

http://www.techspot.com/community/topics/i-can-hear-computing-sounds-from-my-computer-through-my-speakers.202182/
Relevancy 18.49%

I have a Gateway NE56R and ever since I updated to windows 8.1 I cannot use the internet at home even though it says it is connected to WiFi, but it works at other places. Please help asap
 

http://www.techspot.com/community/topics/gateway-ne56r-wifi-doesnt-work-at-home-after-windows-8-1-update.212135/
Relevancy 13.33%

As the title implies I m currently having issues the first major issue is that my PC is turning on off and which the second is that my other hard drive suddenly up and Issue Invisible & HDD Computer Grounding disappeared on me My computer started to turn on and off on me for no reason while I was trouble shooting my initial problem of the HDD when I fiddled around inside my case Eventually ripping everything out of the case and quot card-boarding quot the motherboard which it worked and stayed on and as I gradually put everything back together it was all good until I sat the motherboard back onto the brass copper studs that sits inside the frame and screwed it in At that point my computer started to turn on and off again which lead me to believe it s some manner of a grounding issue Computer Grounding Issue & Invisible HDD I have no clue on what to do at this point about going about this should I just get a new case made of plastic My current full tower case is all steel While I was watching a movie which was stored on my second hard drive is started to freeze lag repeat all that good stuff on me It froze my computer up completely and I was force to hard reset the computer when I booted my PC back up I found that my second hard drive had up and vanished on me So I went into my bios and saw it quot working quot I switch to ACHI to see if it ll make a difference but I got a BSoD so I left it at IDE At that point my computer gave me the option to quot repair windoe files quot or start normally Both options made my computer get stuck on the loading screen thankfully safe mode boots up fine So what could had caused this and how may I go about fixing it nbsp

A:Computer Grounding Issue & Invisible HDD

I also swapped out the PSU with a spare I had lying around, didn't get any power from it so I reused my old one. Now I don't have power from that one either. So besides the "missing" HDD and a suddenly a "no longer working PSU "I'm assuming the motherboard is bad, opinions?
 

http://www.techspot.com/community/topics/computer-grounding-issue-invisible-hdd.211499/
Relevancy 13.33%

Okay so I am having an issue working out if my case will be able to hold my motherboard and graphics card Case Details Available Color Black Materials Steel body plastic Dimension x x mm x x inch (I Computer Building my First setup) changed W x H x D Net Weight kg lbs M B Type Micro-ATX ATX quot Drive Bays exposed quot Drive Bays exposed hidden quot Drive Bays hidden I O Panel USB x int USB x Mic x Audio x supports AC HD Audio Expansion Slots Cooling System Front mm fan x optional or mm fan x Building First Computer (I changed my setup) optional Rear mm black fan x pre-installed Side left mm or mm fan x optional Side right mm fan x optional Building First Computer (I changed my setup) Power Supply Type Standard ATX PS EPS V optional Maximum Compatibility VGA card length mm inch with HDD cage CPU cooler height mm inch Now Ill list my other parts I have They should Building First Computer (I changed my setup) also be links if they are not links just search the name WD quot Green TB WD EZRX SATA M RPM HDD Patriot Signature GB Kit Gx DDR - - PSD G KH Samsung SATA x Black DVD RW Gigabyte N - GI N SL- GL DDR GT PCI-E VGA Card Intel BX G Pentium G GHz MB LGA ASRock H M Anniversary Motherboard nbsp

A:Building First Computer (I changed my setup)

From the case details you have supplied (Motherboard type: Micro ATX or ATX and maximum video card length of 320mm) you are well within the parameters of having everything fit.
ASRock H97M motherboard is a Micro ATX board.
Gigabyte N730-2GI video card is 185mm in length.
 

http://www.techspot.com/community/topics/building-first-computer-i-changed-my-setup.210947/
Relevancy 39.56%

Neither my keyboard or mouse are working on any of the 7 USB ports on my computer. My mouse was initially working, but I read somewhere if you delete the keyboard drivers you can reinstall them and it will work again. BUT when I was doing that I stupidly uninstalled my mouse driver so now NOTHING works. I can't try if it works in safe mode because my keyboard doesn't respond when I hit f12 during boot up.

When I plug in the mouse or keyboard, I get a window that pops up asking if I want to install the hardware, but it's impossible for me to do anything because my mouse and keyboard don't work! If anyone has any ideas I would greatly appreciate the help. Thanks!
 

A:My Dell Demension e510's (Window's XP) keyboard and mouse don't work

First I would try to find a different working keyboard because you should at less be able to boot into safe mode because the drivers don't even load until windows start loading.
 

http://www.techspot.com/community/topics/my-dell-demension-e510s-windows-xp-keyboard-and-mouse-dont-work.211116/
Relevancy 13.33%

I have done some research and have not found a solution to my problem.

I plug in my HDD (Fantom Drive, Green Drive) and I hear the 2tone sound when I plug it into my USB2.0 port.
My computer then searches for a driver. It decides a suitable driver for what I plugged in is called "Initio Default Controller". I got this information from the Device Manager.
I have looked in my "computer and right clicked "manage". The HDD is not listed. I have used more than one USB cord, ports, and 2 different computers with the same problem.
Both the computers are running windows 7 64bit. One is a laptop (ASUS) and a desktop(HP).

Can someone please help me with this problem.

Thanks,
Chris&Dawn
 

A:External HDD not recognized by my computer

So I said the facts but I never mentioned exactly what the issue is. sorry.

When I open my computer when the external HDD is plugged in, it's not there. I can't save files in it, open anything, it's just not there.

Also the icon that pops up that lets you "remove hardware safley" in the bottom right is not there. Also the external hard drive does not show up on any programs like "Defraggler" or "Speccy"

Thanks,
Chris&Dawn
 

http://www.techspot.com/community/topics/external-hdd-not-recognized-by-my-computer.176212/
Relevancy 12.9%

With Broadwell and Skylake desktop CPUs expected to launch next quarter, the urge to upgrade my computer has never been stronger.

Read more
 

A:Weekend Open Forum: What CPU powers your computer?

Got an i5-2500k in my gaming computer, and a C2Q Q8200 in my home server. Because of the small enclosures they are in I have not overclocked them, with the watercooled 2500k being in a Prodigy case stuffed to the gills, and the Q8200 is in a 2U rack case.

Not sure about the server, but I know with Star Citizen in the distant horizon, I'm very compelled to upgrade around the end of the year. This is driven less by my CPU and more by my graphics card (watercooled GTX 570) and memory, which I only have 8GB.

edit: oh yeah, and my XPS 12 has an i5-4210.
 

http://www.techspot.com/community/topics/weekend-open-forum-what-cpu-powers-your-computer.208477/
Relevancy 12.9%

A factory AMD or Intel heatsink is something I simply won't consider when building a computer. I acquired my first aftermarket cooler 15 years ago to assist in overclocking an AMD Athlon 500 (it reached 800MHz with help from a...

Read more
 

A:Weekend Open Forum: What heatsink / water kit cools your computer?

Mine is water cooled. Except instead of liquid its solid. And instead of water its aluminum. And instead of a pump its got a fan. Its actually a laptop.
 

http://www.techspot.com/community/topics/weekend-open-forum-what-heatsink-water-kit-cools-your-computer.209240/
Relevancy 21.5%

Hello, lately I've been having the strangest of problems:
My mouse doesn't work as it should - sometimes clicking on something doesn't do anything, sometimes it does something different, as if some altering keys were pressed - eg sometimes clicking on a tab in a browser will close it (with left mouse button).
I have tried to locate and update new drivers for my keyboard and mouse, since these are my guesses for what could be causing this, but couldn't find any driver for the keyboard and the driver for the mouse didn't change anything.

My mouse : Trust MI-6970C Laser Mouse
My keyboard: Genius KB-G265
I'm running Win 7 Professional

I can't think of any changes that I did at the time this started happening, so I'm really at loss.
Thank you for any advice on this.
 

A:Mouse and Keyboard acting strange

Try them with another computer. If they both work OK suspect either a hardware problem with your computer or a possible malware infection. It could also conceivably be a Windows problem but the other two possibilities are more likely.
 

http://www.techspot.com/community/topics/mouse-and-keyboard-acting-strange.208308/
Relevancy 21.93%

Hi there,

I am not sure how to ask this properly but basically I have a laptop pad controller (AKAI LPD8), normally used for controlling midi. I would like to use this device to control my shortcuts in foobar2000. The problem is that the program does not really like my controller. When I check the device manager, I saw that my controller is seen as "audio device". Is there any way to make computer see the device as another input device like a keyboard? If I can manage to make controller act like a keyboard I think I can handle the rest, is this possible?

Thanks for your helps in advance!
 

A:Using pad controller as a second keyboard

Okay, if anyone else look for it I've found the solution:
for mac: http://www.charlie-roberts.com/midiStroke/
and for windows http://www.bome.com/products/miditranslator/overview/classic
 

http://www.techspot.com/community/topics/using-pad-controller-as-a-second-keyboard.209081/
Relevancy 46.01%

I built my desktop in Sept These are the specs Motherboard Intel BOXDH CLB LGA Intel H HDMI SATA Gb s USB ATX Intel recognized doesn't HDD get Motherboard Power Supply RAIDMAX HYBRID RX- SS W ATX V V EPS V SLI Ready CrossFire Ready Modular Power Supply New HDD doesn't get recognized Version with Build-in LED Fan On Off Switch Graphics Card GIGABYTE GV-N - HDD doesn't get recognized GI GeForce GT Fermi GB -Bit DDR PCI Express x HDD doesn't get recognized HDCP Ready Video Card CPU Intel Core i - Sandy Bridge Quad-Core GHz GHz Turbo Boost LGA W Desktop Processor Intel HD Graphics BX I Last night Feb th I was peacefully watching tv on it I shut it down before I slept Next morning I wake up and turn it on And my baby doesn t turn on She won t respond to my fingers Fans aren t spinning like nothing So what did I do -I opened her up I saw the green light on the mobo was on This gave me a hint that PSU is Okay -Checked if everything was connected even though I haven t moved the computer anywhere lately so I don t imagine anything to get loose Seemed all good -Then I wanted to test the PSU I unplugged the PSU from Mobo the pin connector Only top fan was connected to the PSU Then I carefully performed the paper clip test The top fan ran Woo This makes me thing that PSU is still okay -So I connected it to the rear fan component on the mobo I did not connect the pin connector So at this point I still have the paper clip in the PSU plug I did the test again Only the top fan ran Rear fan did not run Top fan is directly connected to the PSU Rear fan is connected through the mobo -Now I am not sure if the rear fan is supposed to run if the connector aren t connected If the rear fan should run regardless if the pin connected as long as PSU is directly supplying to the rear fan component on the mobo then I would say that my mobo is bad If I need the pin connector to run the rear fan along with the direct connection from the PSU to the component then I would say my PSU is not giving enough power -So I went on got a PSU from best buy with same watts to see if it turns on It did Therefore my old PSU wasn t producing enough energy However now my HDD is not being recognized The BIOS says no Hard Disk recognized All my SATA cable is connected to my PSU I feel my SATA cable that connects HDD to mobo is bad -I connected PSU directly to HDD and still not luck I did this to find out if the connector that comes out of HDD had problems which I think it doesn t Less probable -This is why I think my SATA cable from HDD to mobo is bad as it s not giving good connection I hope my HDD didnt go bad I am trying to see if I can find anyone to check if my HDD will work on their desky -Any Suggestions nbsp

A:HDD doesn't get recognized

A SATA cables are cheap, go get one and try that.
 

http://www.techspot.com/community/topics/hdd-doesnt-get-recognized.208757/
Relevancy 18.06%

My Dell Inspiron 5520 will respond when I press the power button, will flash all the LEDs and then just shut down. The whole process takes about 6 seconds. The fan starts up but nothing is displayed on the screen and there are no weird beeps. Any ideas on what is happening or how to get it to complete booting up?

I got this in December of 2012 and have had very few other problems with it
 

A:Dell Inspiron 5520 Will not start up

Are you comfortable with disassembling the laptop? Really the only thing we can test is removing the Hard Drive, RAM, and DVD player.

First I would try the HD and DVD to see if either of those are stopping it from powering for what ever reason, and you will still get something on the screen and see if it boots.

Once you remove RAM you are not going to get anything on the screen, it doesn't POST(Power-On Self-Test) it will fail guaranteed, but you "SHOULD" get beeps, however the problem with that is ensuring the MB is actually causing the Beep, and if it's not it'll just do the same thing regardless, it's best to have some spare RAM that you know works to test with. (Same speeds and kind, need to be sure) The reason for this is to make sure that it's not RAM but you're not just getting the same issue.

Putting in some spare RAM will at least allow you to ensure it's not just the RAM chips, one thing to try if you have multiple sticks of RAM is try each stick separately, and in each slot to make sure it's not one stick or one slot causing and issue.

The only other things to make sure is the power that is getting to the laptop is clean power. Two ways to do this as well, firstly you can test the power supply using a Multi-Meter if you have one and know how to use it. You can check the voltages on the power supply, Connect to the wall and test the first portion to ensure 120V clean power, then if its good, test it going through the transformer and check the bottom of the laptop (Possibly underneath the battery) for the proper Voltage and Amperage. Test with the multimetre and see if it matches, if its not giving proper power it can cause tons of issues.

The other option is to buy a universal power supply and change the voltage to match the laptop and then try it. Due note that not ALL universals work with all models of laptop and that it's not the recommended way of power, it's best to use the adapter designed by the company, specially for HP's and Dell's as they seem to be much more proprietary than other companies.
 

http://www.techspot.com/community/topics/dell-inspiron-5520-will-not-start-up.208719/
Relevancy 18.49%

My PC with windows 7 is the only computer with issues in the house. Ethernet works perfectly but wifi doesn't even when I don't have the ethernet hooked up. The wifi says it is connected but browsers, steam, and Itunes don't work. I have Bitdefender A/V and already tried uninstalling it, no change. I also uninstalled steam and Itunes with still no change. I even uninstalled and reinstalled the drivers for the wireless adapter. I tried looking and I don't recall downloading or installing anything around the time the problem started. Before I try replacing the adapter itself, I was hoping for help here since I saw a very similar problem in another thread.
 

A:Internet connects but doesnt work on wifi, ethernet works fine

Bump
If there is any more info I can give to help you help me, please let me know.
 

http://www.techspot.com/community/topics/internet-connects-but-doesnt-work-on-wifi-ethernet-works-fine.199827/
Relevancy 18.92%

Hey!
I have an Acer that spontaneously decided I no longer needed to play games. Everything else works perfectly fine. It's been doing this for the past few weeks and I've done all that I can. I'm no tech wizard by any means and I need some help. Pretty much it'll open to the load screen for a few moments then disappear back to my home screen. Any ideas on what it could be and what I can do?

These are the specs:
Acer Aspire V5 Touch with Windows 8.1
Aspire V5-V561PG-9683
Model number: Z5WV2

If you need more info let me know, I still have everything for it.
 

A:Acer Aspire issues; Games no longer work

If you are talking about the games that are loaded by a app. You will need to uninstall the app. Then reinstall the app. I have no ideal why this happens . But I have seen it more then once.
 

http://www.techspot.com/community/topics/acer-aspire-issues-games-no-longer-work.208471/
Relevancy 21.07%

I m doing this on my Toshiba laptop at the moment and you ll see why later in this post Earlier today I acquired an ASUS Z C notebook and had noticed that the keyboard is acting rather strange Certain keys will also register other keys when pressed Here s which ones react this ASUS Issue Z54C/X54C Mapping Keyboard way letters are not case sensitive U will also register Zero will register registers registers R W registers S ASUS Z54C/X54C Keyboard Mapping Issue I I places a Date Stamp this might be the problem There may be others but I d like to move on to the behavior the way this behaves is if I press the key U then quot u quot or quot U quot will show up depending on ASUS Z54C/X54C Keyboard Mapping Issue if I press Shift or not The same thing happens if I press the key This is the same for all others if I press one or the other of these keys in question the other appears with it At first I thought this was a problem with the copy of Windows that was installed so I installed Windows Tech Preview I was going to do so anyway However this behavior did not go away Looking for help and I d be more than happy to resolve this problem I should note that not all keys behave this way but that the majority of them work fine It s just that this should not be happening to begin with I ve also pulled the keyboard out and inspected it I didn t see any dried fluids or any obstructions in the keys Should I perhaps consider replacing the keyboard Sadly I have no USB keyboards to see if the behavior is isolated to the laptops primary keyboard although using the On-Screen Keyboard doesn t elicit this behavior nbsp

http://www.techspot.com/community/topics/asus-z54c-x54c-keyboard-mapping-issue.208302/
Relevancy 12.9%

Hi all. I've got this issue with my graphic card (fresh and crispy by the way - 1 month old). Few days ago I was just browsing web when suddenly blue screen came out of nowhere on my Windows 8.1 desktop PC. Ever since then when computer boots screen is filled mozaic-like with green squares, after few seconds it's changing to vertical lines. Obviously Windows window manager won't open at all, and it greets me with black screen. After I deactivated graphic card, and switched cable to main boards VGA port computer runs ok.

I've seen some similar threads on techspot suggesting that due to escessive dust 'consuption' GPU can overheat and irreverisbly burn therefore. Is it possible that the same thing occured here?




 

A:Green squares on computer boot, Nvidia GTS 250

It's what I've seen on the screen when one of my graphics cards has died. As it's almost new changing it shouldn't be a problem. It's more likely to be a faulty graphics card than dust. Double check that it's seating properly in its port and that the video cable is OK.
 

http://www.techspot.com/community/topics/green-squares-on-computer-boot-nvidia-gts-250.208163/
Relevancy 19.35%

Can I run 1600mhz ram on a mb which is supported 1333mhz (my config MSI-760gm P21-FX 1gb asus amd radeon 5450 gfx card And 4gb rm of 600mhz.
 

A:Can 1600mhz ddr3 ram will work on mb which is supported at 1333mhz?

1600 MHz RAM should down-clock to 1333MHz just fine, but I will not make guaranties. It usually works perfect, but there is always the possibility of incompatibilities.

The GPU memory and frequency is independent and irrelevant for this topic.
 

http://www.techspot.com/community/topics/can-1600mhz-ddr3-ram-will-work-on-mb-which-is-supported-at-1333mhz.207921/
Relevancy 19.35%

I have done everything I can think of. I have windows 7 64 bit. I have disabled/re-enabled sound cards, uninstalled/reinstalled drivers. I have checked all settings I possibly can think of. My head phones work GREAT and on startup I can hear the sound, but once in windows, no sounds through my speakers.

Any suggestions?
 

http://www.techspot.com/community/topics/i-hear-windows-startup-but-after-that-nothing-headphones-work-though.207890/
Relevancy 19.78%

Hi,

I installed win 7 x86 on a sony vaio vpceb36fg. Everything seems OK but the Fn keys. The combination of Fn+related keys work only for sound volume and screen lock button and not for others!

How to get all Fn keys worked please?
Is it needed to install any tool/utility?
 

A:Fn keys don't work

Your laptop came with Windows 7 Home Premium 64 bit so I'm curious as to why you decided to install a 32 bit version.

Laptops, particularly Vaios, have specific functions assigned to keys. On yours you were previously able to surf the web and play DVDs without booting up into Windows. To regain all that you've lost will take quite a bit of work. The utilities you need will be on a Sony support site. However, sometimes things have to be installed in a particular order before they work. It took me a long time Googling, downloading utilities and experimenting to get everything working when I reinstalled the OS on my Vaio.
 

http://www.techspot.com/community/topics/fn-keys-dont-work.207842/
Relevancy 21.93%

Without going into details, about a teaspoon of shampoo got spilled on my laptop keyboard in the top left quarter. I tried posting this from it, but it was unreadable. I immediately shut it down & used a dry towel to wipe up excess but some keys still don't work .
Please don't tell me I have to tear my laptop apart The Esc key does work.
Its a VGN-CR590
I do have the manual ,but I don't think it shows how to remove the keyboard. TIA
 

A:How do I remove my laptop keyboard?

I'm stumped. I found this http://www.laptopkeyboard.com/Guides.php/Sony/VGN-CR (Silver)/VGN-CR590/KBS15
checked out the manual but still can't find the screws with keyboard icons & I fear breaking the keyboard by removing it incorrectly.
 

http://www.techspot.com/community/topics/how-do-i-remove-my-laptop-keyboard.206608/
Relevancy 19.78%

Before I say anything else, I am very new to building a computer. Ive never built one in my life. I am curious if the setup I have to far will work! I am trying to look for pretty cheap but good options for parts. So far I have a case, processor, and GPU in mind. I need ideas for the motherboard especially. I dont know how to tell if everything would work correctly, so if something would be incompatible, could you tell me?

So far I have

GPU: Nvidia GTX 760
CPU: Intel Core i7-3770k
Case: NZXT Phantom 240 Mid Tower
Ram:
Motherboard:
Hard-Drive: Seagate Barracuda 2TB HDD
Power Supply:
DVD Drive:
Operating System: Windows 7 64 Bit
Monitor:

Would there be anything else I need? Also what is thermal compound and Heatsink? Are these required for my setup? Please tell me if there is anything wrong with this so far and what items I should use for the unfilled spaces! Thank you all so much!
 

http://www.techspot.com/community/topics/will-this-setup-work.207722/
Relevancy 45.15%

Over multiple devices on the network wifi works including this laptop I m running on However any time I try to use ethernet including on this laptop there is no internet connection The error when troubleshooting is Wi-Fi Works, Ethernet Doesn't Dns server not responding While on ethernet connection Wi-Fi Works, Ethernet Doesn't I can access the networked printer but cannot access the default gateway so connection is going from room to the modem and through I have tried restarting the wifi lan modem which then connects to another router down stairs which I haven t restarted my dad won t let me I have tried flushing dns uninstalling and re installing the adapter starting in safe mode with networking This is my ipconfig all while on wifi Windows IP Configuration Host Name Rob-Laptop Primary Dns Suffix Node Type Hybrid IP Routing Enabled No WINS Proxy Enabled No DNS Suffix Search List BigPond Wireless LAN adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description Microsoft Wi-Fi Direct Virtual Adapter Physical Address B - - - - - B DHCP Enabled Yes Autoconfiguration Enabled Yes Wireless LAN adapter Wi-Fi Connection-specific DNS Suffix BigPond Description Mediatek MT E bgn Wi-Fi Adapter Physical Address B - - - - - DHCP Enabled Yes Autoconfiguration Enabled Yes Link-local IPv Address fe c d f d a Preferred IPv Address Preferred Subnet Mask Lease Obtained Wednesday December PM Lease Expires Friday December PM Default Gateway DHCP Server DHCPv IAID DHCPv Client DUID - - - - B- - D-A - -A - - -C - DNS Servers NetBIOS over Tcpip Enabled Ethernet adapter Ethernet Media State Media disconnected Connection-specific DNS Suffix BigPond Description Realtek PCIe GBE Family Controller Physical Address -A - - -C - DHCP Enabled Yes Autoconfiguration Enabled Yes Tunnel adapter Teredo Tunneling Pseudo-Interface Connection-specific DNS Suffix Description Teredo Tunneling Pseudo-Interface Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes IPv Address d d e fbb a Preferred Link-local IPv Address fe e fbb a Preferred Default Gateway DHCPv IAID DHCPv Client DUID - - - - B- - D-A - -A - - -C - NetBIOS over Tcpip Disabled Tunnel adapter isatap BigPond Media State Media disconnected Connection-specific DNS Suffix BigPond Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes And here it is on Ethernet Windows IP Configuration Host Name Rob-Laptop Primary Dns Suffix Node Type Hybrid IP Routing Enabled No WINS Proxy Enabled No DNS Suffix Search List BigPond Wireless LAN adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description Microsoft Wi-Fi Direct Virtual Adapter Physical Address B - - - - - B DHCP Enabled Yes Autoconfiguration Enabled Yes Wireless LAN adapter Wi-Fi Media State Media disconnected Connection-specific DNS Suffix BigPond Description Mediatek MT E bgn Wi-Fi Adapter Physical Address B - - - - - DHCP Enabled Yes Autoconfiguration Enabled Yes Ethernet adapter Ethernet Connection-specific DNS Suffix BigPond Description Realtek PCIe GBE Family Controller Physical Address -A - - -C - DHCP Enabled Yes Autoconfiguration Enabled Yes Link-local IPv Address fe b c dc Preferred IPv Address Preferred Subnet Mask Lease Obtained Thursday December PM Lease Expires Friday December PM Default Gateway DHCP Server DHCPv IAID DHCPv Client DUID - - - - B- - D-A - -A - - -C - DNS Servers NetBIOS over Tcpip Enabled Tunnel adapter Teredo Tunneling Pseudo-Interface Media State Media disconnected Connection-specific DNS Suffix Description Teredo Tunneling Pseudo-Interface Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter isatap BigPond Media State Media disconnected Connection-specific DNS Suffix BigPond Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Any help you could give would be mu... Read more

http://www.techspot.com/community/topics/wi-fi-works-ethernet-doesnt.207715/
Relevancy 13.33%

I recently bought several Dell Optiplex GX computers online for repair I usually do a thorough review of what I am getting but this was a a with VGA Help DVI-D on port computer monitor using a cheap deal on a big lot and a few things slipped by me For one it takes a special power cord that I can t find for less than and there were none Help using a VGA monitor with a DVI-D port on computer with the lot I ordered one to test them with for now but that is not my main problem but if anyone knows where I can get those DA- adapter power cords any cheaper please let me know where My main problem is that these are the small form factor cases so they have no card slots I am dependent upon the motherboard options only So here is my problem the only connector for a monitor on the back of the computer is for a DVI-D which would be great if I had monitors with those connections The only connections I have on my monitors are the VGA I bought some adapters from e-bay that were supposed to convert the DVI port to the VGA which the connector did but I have no screen using this adapter and I am thinking that I was cheated Can this even be done this way I have always just changed the video card but this computer has no way I can see to do that it is all in the motherboard Does anyone know what I can do here I put a fresh install of io xp pro on several of then since that is what they came with They only have pentium s with hyperthreading and single core processors and I didn t think windows would help any If anyone knows what I can do to use these VGA monitors please tell me because without being able to put a video card in it I am lost sincerely cableman nbsp

A:Help using a VGA monitor with a DVI-D port on computer

Your best bet for Global spares is www.pchub.com.

As to the DVI to D-Sub you did the right thing in buying an adapter. It should work period. Did you get the joblot from eBay? Was it sold as untested? Are the PCs even powering on? Maybe there are issues with memory/cpu/motherboard....

http://support.dell.com/support/edocs/systems/opgx620/en/ug/A02/solve00.htm#wp1286323

Yes you have to be very careful when upgrading the CPUs for this unit as they follow a narrower roadmap. Top line CPU would appear to be a Pentium D3.4Ghz which worked in a GX620 usff with bios revision A11.

Good luck!
 

http://www.techspot.com/community/topics/help-using-a-vga-monitor-with-a-dvi-d-port-on-computer.172534/
Relevancy 19.78%

I have a toshiba laptop right at a year of having it, it will not allow me to get internet connection even though it shows its getting wifi or set up through the router.. Is this a virus or other issue
 

A:Toshiba Internet won't work

Moving this topic to appropriate forum.
 

http://www.techspot.com/community/topics/toshiba-internet-wont-work.207422/
Relevancy 13.33%

My computer is being running slow and is choppy also, I'm making sure the system is clean right now.
 

A:Computer slow and choppy

Problem solved, runned some anti-malaware programs and cleaned my computer.
 

http://www.techspot.com/community/topics/computer-slow-and-choppy.207403/
Relevancy 12.9%

I have a Windows 7 HP desktop system that is connected to the internet via an ethernet cable. The system says it is connected, and a ping confirms it is accessing the internet. BUT, all the browsers say the computer is not connected to the internet (tried Chrome, Firefox and IE). All of the Microsoft network adapters (6to4, ISATAP adapter, ISATAP adapter #2, Teredo Tunneling Adapter) shown under device manager cannot start (Code 10). the Realtek PCIe FE Family Controller is the only network adapter shown as working properly. What do I need to do to fix this? Let me know if there is any other information needed to help me.
 

A:Windows 7 computer says connect via ethernet and ping confirms but cannot get to any page

Does your router see this computer on the network?
Are you on Private Network or Home Network?
Is the IP address showing 192.168.x.x or is it showing 169.xx.xx.xx?

NIC network card you can do a few things. You can can disable it and re-able it.
Open dos prompt
type: ipconfig /flushdns
type: ipconfig /release
type: ipconfig /renew

Give this a sec or two.

Now under services.msc (use the control panel and type services)
Select view local services
Scroll down for
DHCP Client (right click and stop it) wait then right click and start it
DNS Client (right click and stop it) wait then right click and start it

If none of the above work go into the device manager. under control panel type: device manager. click on device manager

-Network adapters
-Realtek PCI-e this one uninstall the drivers (BUT DO NOT DELETE THEM)

Two options here.
One: Scan computer for new hardware changes
Two: Reboot the PC

Choose Two, because Windows will re-install the drivers and setup network card settings. for you. The Choosing One would do that same but you really want to flush out any prior issues that got you to this point.
 

http://www.techspot.com/community/topics/windows-7-computer-says-connect-via-ethernet-and-ping-confirms-but-cannot-get-to-any-page.207373/
Relevancy 13.33%

Hey , I am not good at computers
plz help me to choose the best and cheap graphic card for my computer
the details of my computer are:
OS Name Microsoft Windows 7 Professional
Version 6.1.7601 Service Pack 1 Build 7601
Other OS Description Not Available
OS Manufacturer Microsoft Corporation
System Name PAWAN-PC
System Manufacturer WIPRO
System Model MS-7267
System Type X86-based PC
Processor Intel(R) Celeron(R) CPU 2.80GHz, 2792 Mhz, 1 Core(s), 1 Logical Processor(s)
BIOS Version/Date American Megatrends Inc. V17.21B6, 9/10/2007
SMBIOS Version 2.5
Windows Directory C:\Windows
System Directory C:\Windows\system32
Boot Device \Device\HarddiskVolume1
Locale United States
Hardware Abstraction Layer Version = "6.1.7601.17514"
User Name pawan-PC\pawan
Time Zone India Standard Time
Installed Physical Memory (RAM) 1.00 GB
Total Physical Memory 0.99 GB
Available Physical Memory 211 MB
Total Virtual Memory 1.99 GB
Available Virtual Memory 921 MB
Page File Space 1.00 GB
Page File C:\pagefile.sys
 

A:What's the best and cheap video card for my computer?

I don't think that GPU will make any difference in your 'rig'
 

http://www.techspot.com/community/topics/whats-the-best-and-cheap-video-card-for-my-computer.207332/
Relevancy 63.64%

Hey guys, my laptop asus stopped working with wifi connection and I was just reading some posts here about this same problem but didn't find how to fix it.

I was uninstalling some programs from my pc but I didn't uninstall programs named "something wireless". I just took off what I knew I could.

I also tried the option "solve problems" in the wireless pc symbol and the answer was to connect my laptop to an ethernet cable...that never happened. Just now.

Does anyone knows how I get back my wireless connection? Pleasee
 

A:WiFi doesn't work only with cable ethernet

Powercycle the modem and router. Here is a specific order if you have a separate modem and router.
1. Shut down all PC's.
2. Shut down the Modem and router.
3. Power on the modem only. Wait 2 minutes or so.
4. Power on the router. Wait 2 minutes or so.
If you have a modem/router combo, then you don't need step 4.
5. Boot up the PC and see if you can connect.
 

http://www.techspot.com/community/topics/wifi-doesnt-work-only-with-cable-ethernet.207136/
Relevancy 19.35%

Hi all I have to the WLAN work as rather Router on from a WiFi LAN a a typical situation in my Internet and LAN setup My ISP provides me with a direct LAN cable that I need to connect either into my PC or into the WiFi Router WLAN port I also have a LAN that I need to connect to so I have installed a separate LAN card for the internal LAN purposes My two setups are below with their issues I hope someone can suggest a middle grounds to have a LAN and a WiFi too Scenario The ISP cable goes into the WLAN port of the Router Cables from the router goes into my PC network card and to other PCs for LAN purposes The PC cards are all configured to automatic IP LAN Internet WiFi is now available This works fine for a few days and then the internet stops working because there is a conflict of IP The ISP expects IPs like xxx and the one on the LAN Router for my PC is Scenario Router to work as a WiFi on the LAN rather from a WLAN The ISP cable goes into network card internet sharing is enabled Router to work as a WiFi on the LAN rather from a WLAN and automatic IP with the ISP s expected IP xxx Another cable goes from my PC s network card fixed IP into the regular LAN port of the same Router Without any issues over the months the Internet works the LAN works other PCs have fixed IPs too etc but no Wifi Can I have best of both the worlds in such a situation I can t install a rd network card for sure as the slot on the mother board is limited Please advise Thanks in advance Bhavbhuti nbsp

A:Router to work as a WiFi on the LAN rather from a WLAN

Code:

Scenario-1
isp==>(wan)router-->PC card-1, et al (conflict 123.237,234.xxx v 192.168.1.100)

Scenario-2
ISP===->pc card-1
pc card-2==>router
scenario-1 is a configuration or firmware condition
scenario-2 is a real security issue and the primary PC is basically acting as a DMZ server and is at risk.
Here's my setup:
Code:

isp==(wan)router-1--- PCs in the same room
|
+---(lan)router-2(with wifi) - - - wifi connections in the den

configuration to make this work with full file/print sharing:
router-2:

disable DHCP in this router
setup all WiFi settings here
notice: router-2 wan slot is left empty to make this work
Router-1:

set LAN address of router one as you please (eg: 192.168.1.1 )

set an address reservation for router-2's MAC -> a fixed, constant IP address on that same subnet (eg 192.168.1.254)
set the DHCP range small (eg 2-32)
router-1 will control all auto-ip assignments for both routers.

Personally, I add another tweak;

reserve ip addresses for all of my devices into the low-end of the dhcp range (say 2-10) and
let 'guests' take addresses above 10
This gives the opportunity to allow file/print sharing to known systems (2-10) and disallow for the guests.

Setup totally within the routers allow my laptop to travel and not be effected by these choices.
 

http://www.techspot.com/community/topics/router-to-work-as-a-wifi-on-the-lan-rather-from-a-wlan.207258/
Relevancy 12.9%

When I am playing a video with any browser it is very choppy (sound and video).
Even Window sounds are choppy. It seems like if I move the mouse it gets worse.

Computer is very slow to open programs, even though the system idle process
is at 99% before starting another progam. This happens even when no browser is open and the
anti-virus software is disabled.

I don't know is this is a software or hardware issue.
 

A:Computer very slow. Choppy video and audio playback from browsers

Post this here:
http://www.techspot.com/community/forums/virus-and-malware-removal.28/
See if they can help with this problem
 

http://www.techspot.com/community/topics/computer-very-slow-choppy-video-and-audio-playback-from-browsers.207159/
Relevancy 12.9%

Hello all,

I use an ADSL modem for accessing Internet in my home. I think my wifi password is stolen. I wanna change it but I have a computer only in my office and use the Internet in my home by my iPhone. Is there a way to change that password with my iPhone or should I surely use a computer to do that work, please?
 

A:How to change the Wifi password of an ADSL modem without a computer

Hello abbasi ,
You can use your iPhone to log in the router and change the wireless settings, however this isn't usually recommended. If something goes wrong when configuring the wireless settings and you are not able to connect to the router you'll need a device that can be connected via Ethernet cable to restore the access.
If this router is supplied by your ISP you can ask them if they have remote access to it to change the password.
Hope that helps.
 

http://www.techspot.com/community/topics/how-to-change-the-wifi-password-of-an-adsl-modem-without-a-computer.207093/
Relevancy 13.33%

I need a computer that can handle video editing, mainly Final Cut Pro and Adobe Suite. Right now I have a 5-year-old MacBook Pro that can't manage FCP let alone run any programs smoothly and quickly. I can't afford a MacPro, so I've been considering iMacs. What's my cheapest option that will get the job done? I've heard you can buy PCs and install Mac OS. Would that be my best option? (Having PC capabilities would be awesome, for light gaming). I want to save money but I don't want to buy anything that isn't equipped to handle video editing well (cause then I'm just wasting money). I want to stick with Mac OS, but I don't care about the design or whatever, so I'd happily get a PC and put Mac on it, but I don't know how I would go about doing that. So if you have any suggestions or advice, please let me know! Thanks!!
 

A:Buying new computer/OS for video editing

What is your budget (how much can you spend) for this new computer?
 

http://www.techspot.com/community/topics/buying-new-computer-os-for-video-editing.207058/
Relevancy 13.33%

I have been thinking about buying a really good Gaming Computer, and now I have no idea which computer or specs to actually get. I want something cheap but don't mind expensive. I also heard that custom built computers are better than already engineered computers. I was checking out http://www.ibuypower.com/Store/Intel-B85-Configurator but like I said I don't know what specs to get for this computer. I want a computer that can support any game like any call of duty, minecraft, LoL, WoW, etc. and maybe posting videos on YouTube or others. Please help and thank you for your attention.

Please comment the specs
 

A:A good gaming computer

That is a good place to have a computer built as far as specs go there is no computer specs that have to be met, a good PSU is good in any machine, a reasonable mobo is needed in any machine. I prefer ASUS but they will be the highest if top of the line. if u are going to overclock make sure it is over clockable and make sure the processor is over
clockcable and yes they both have the ability, although the board will just put the # down. any video card will play games, but the newer ones should give u more frames, and last longer. as far as the processor AMD or Intel will be fine. and that site will e-mail u if the MOBO and processor will not work together.
 

http://www.techspot.com/community/topics/a-good-gaming-computer.206756/
Relevancy 19.35%

Well I am accessing my remote router via and it works access work via phone, Remote PC doesnt via ok when I am using my Phone s Remote access ok via phone, doesnt work via PC browser chrome or IE on Samsung however when I am at computer at work I cant access my router I ran Tracert and I am getting up to hoops and th says quot Request timed out quot lt ms lt ms ms lt ms lt ms lt ms lt ms lt ms lt ms ms ms ms ms ms ms ms ms ms ms ms ms ms ms ms ms ms ms Remote access ok via phone, doesnt work via PC ms ms ms border ge - unitedair- chg pnap net ms ms ms core te - -bbnet chg pnap net ms ms ms ae - chi ip gtt net ms ms ms xe- - - chi ip gtt net ms ms ms c-eth- - - -pe ecermak il ibone comcast ms ms ms he- - - - -cr ecermak il ibone comcast ms ms ms ms ms ms te- - - - -sur mortongrove il chicago com net ms ms ms te- - -cdn mortongrove il chicago comcas t Request timed out Request timed out Request timed out Request timed out Request timed out Request timed out Request timed out Request timed out Request timed out Request timed out Request timed out Request timed out Trace complete Anyone would know why it works on the phone and doesnt really go through all the way to the end nbsp

A:Remote access ok via phone, doesnt work via PC

Ok I have to ask first when you are using your phone is it always using mobile data or do you connect it at work via wifi? When reason that makes sense to me is at your work they maybe blocking the remote port. I guess it all depends on what you are using also. If you are just using standard RDP then they might be blocking port 3389. If you could give further information on how you are connecting remotely whether using software such as teamviewer or just standard RDP. Also how do you have your router configured. I can better understand witht is information thanks....
 

http://www.techspot.com/community/topics/remote-access-ok-via-phone-doesnt-work-via-pc.206550/
Relevancy 29.67%

Printer Problems in Windows XP sp3
Dell Personal Printer all in one A940
After trying to speed up an older computer running Windows XP
I may have cut off the Print Spooler (or it was already off ?)
I went back to Services dialog box & selected Print Spooler
I clicked the "Start" link at left of service list & got a message tgat said
"could not start print spooler service on local computer error 1068 The dependency service or group failed to start."
Printer is still not working can anyone help?
 

A:Could not start print spooler service on local computer error 1068

On Win/7 the dependencies are

HTTP

Remote Procedure Call (RPC)
DCOM Server Process Launcher
RPC Endpoint Mapper
Manually start each on and set to AUTOSTART as you go.
If one fails, then that is the root problem.
 

http://www.techspot.com/community/topics/could-not-start-print-spooler-service-on-local-computer-error-1068.206839/
Relevancy 12.9%

My 320 GB Seagate external hard drive is detected but not showing up in my computer. What should I do?

In cmd> diskpart> list volume it does not show up. (screenshot attached)

In Device Manager it gets detected. (screenshot attached)

In disk management it shows up as 'unallocated'. If I initialize it, will I lose all data on the drive? It had 4 partitions. (screenshot attached)

In My Computer also it does not show up. (screenshot attached)
Even BIOS recognizes it.

What to do? I don't want to lose any data on the drive. If I initialize it in device manager will I lose data?

I was installing window XP on my computer, usually I remove the external drive but this time I did not. The external drive was shown as 4 drives in partition manager during installation. But the installation failed. The next time I was installing windows again, the external drive was shown as 1 single unknown or unrecognized drive. I'm not sure if it was unknown or unrecognized. I'm sure I didn't format it. So what I need to do now? I don't want to lose any data.
 

A:Seagate external hard drive not showing up in my computer. It is detected.

Yes, if you initialize it you will 'lose' everything. You will want to try something like [email protected] Recovery or maybe Easeus Partition Recovery.
 

http://www.techspot.com/community/topics/seagate-external-hard-drive-not-showing-up-in-my-computer-it-is-detected.205926/
Relevancy 17.63%

I use a nice old Asus VW266 27" LCD monitor that's at least 5 years old.

Recently, it suddenly started taking several minutes to finally detect a signal after turning on the computer.

When the computer is off, the power light on the monitor is orange. When I turn on my computer, it blinks blue until it detects a signal, at which point it goes solid blue. This takes about 3 minutes during which time the monitor is off (no logo, no backlight).

Once the monitor finally "warms up", it suddenly detects a signal and instantly turns on (no "fade in"). I connected it to on-board video to rule out my video card. Once it starts working, it's perfect. Runs fine for hours. No flicker, no fading, no outages.

So, is my monitor dying? What might be wrong and is there a way to fix it w/o spending a fortune? (it is very hard to find affordable 16:10 monitors nowadays, so I'm not anxious to replace it.)

Thx.
 

A:Monitor taking minutes to start. Is it dying? Fixable?

I think this is easy to fix ...
Don't worry
Just some tests must be done by a technician to know what exactly is happening

You may also try to unplug the monitor after it detects the signal and reconnect it to see what will happen ... This may make it more easy to determine what is wrong
 

http://www.techspot.com/community/topics/monitor-taking-minutes-to-start-is-it-dying-fixable.205974/
Relevancy 21.93%

My Gateway NV52 keyboard randomly stops typing o, p, l, ., and (.
All f a sudden it starts working as normal. Again while I am typing, the above mentioned letters stop working.

I checked for dirt stuck under the keys but nothing was there

the weirdest thing is, I tried a USB flexible keyboard instead and that was working properly for a while and that o, l, and . stopped working on that one as well.

I am confused why it's happening., and sick of filling the blanks of o, p. l with "on-screen keyboard". Please help me to figure this out.

Thanks guys, appreciated.
 

http://www.techspot.com/community/topics/gateway-nv-keyboard-issues.206519/
Relevancy 19.78%

Hey guys

I have a problem with my laptop.
Sometimes the space bar, n and enter key stops working. When this happens, I can usually hit the button a few times and the key finally registers. It happens randomly and quite often. But sometimes I can type for hours without it happening.

I have not spilled any liquid on my laptop and I haven't dropped it. The problem started randomly a few months ago.
Does anyone know what could be causing this?

The laptop is an Asus K55V. It is nearly 3 years old

- Fred
 

A:Laptop keys sometimes don't work

Hey Fred,
Not sure if this might work that well, but give it a try! If it doesn't..go to a technician...its probably the best idea.

Shut down the laptop, removed battery and cable for a moment, press and hold the start button for 60 seconds... and replace the battery.. start the lap top.

Hope this helps!
 

http://www.techspot.com/community/topics/laptop-keys-sometimes-dont-work.205954/
Relevancy 12.9%

Hi,

I'm using a Huawei Mobile Broadband E303 and I've been having this problem for 6-7 days now Ples halp
It was working perfectly fine before but now the speed wont go past 60-70kbps.
My current operating system is windows 7 ( V 6.1.7601 )

I've tried using it on other laptops with windows 7/xp/vista as their operating systems still the same problem except for my brothers laptop which runs on windows 8. and dont tell me that this Thing wont work because its not compatible with my operating system, because I've been using it for over a year without an issue.

My ipconfig shows:
Mobile Broadband adapter Mobile Broadband Connection:

Connection-specific DNS Suffix . :
Link-local IPv6 Address . . . . . : fe80::7450:69bc:7a3e:fee8%57
IPv4 Address. . . . . . . . . . . : 172.22.155.137
Subnet Mask . . . . . . . . . . . : 255.255.255.252
Default Gateway . . . . . . . . . : 172.22.155.138
And when I try to do nslookup:
C:\Windows\system32>nslookup
Default Server: google-public-dns-a.google.com
Address: 8.8.8.8

The default server shouldn't be that thing. please help. Nor the address

Edit: I've tried Uninstalling the Program which came with the USB.
I've tried calling my ISP, with no problems on their end.
 

http://www.techspot.com/community/topics/your-computer-seems-to-be-correctly-configured-but-the-device-or-resource-dns-server-not-respondin.206332/
Relevancy 13.33%

Randomly, about 2-3 weeks ago my computer began to run slowly. If I'm just browsing the internet or using word documents and things like that it is fine and I cannot tell. The problem lies in things like playing games or running programs like itunes. I checked for all virus/malware, and there was nothing that I could see. I did a defrag and cleaned/cleared the registry and temp folder. Does this sound like it could be a hardware or driver problem? If its not a virus, could you give me a few other reason a computer would start doing this randomly.
 

A:Computer runs slow

Overheating? What are the computers specs?
 

http://www.techspot.com/community/topics/computer-runs-slow.179236/
Relevancy 13.33%

These are the specs I have so far,

MSI X99S Gaming 7 Motherboard
i7 5820K
Corsair Vengeance LPX 16GB (4x4)
2x MSI GeForce GTX 970 Gaming 4GB SLI
Cosair Hydro Series H80i
Cosair HX1000i 80plus Platinum 1000W (For future maybe a third gtx970)
Coolermaster Cosmos 2 Ultra
Samsung EVO 250GB (OS)
2x Samsung EVO 1TB (Main Games)
2x Western Digital Black 3TB (Other older games and programs)
Windows 7 Pro 64x

Other various fans (going with a black and blue theme outside and red and white inside)

Plenty for max setting at that resolution?
 

http://www.techspot.com/community/topics/parts-for-3440x1440-computer.205962/
Relevancy 29.24%

I bought my laptop(asus x52j)back in 2010 or 11(I don't remember)but in 2012 a problem occured with the battery so I always have it plugged in since then.I never experienced this problem before:while I was watching a youtube video,my laptop turned off.For a second I thought it was a blackout but my ps4 was still on.I turned the laptop on but it was operating slower than normal,so I restarted it.Everything was running fine for about 10 minutes after the restart but then it turned itself off again.What should I do?Please help me!!!!!!!
 

A:My laptop turns off itself

HWMonitor is a neat little freeware program that shows temperatures and fan speeds. You can use it to check for overheating issues. If the notebook has never been cleaned out or had the heat paste renewed there's a good chance it's down to that. If not, you could remove the notebook battery and run it on the mains/charger unit to see if it's the battery. (HWMonitor will also give info on the state of the battery you are using.)
 

http://www.techspot.com/community/topics/my-laptop-turns-off-itself.205753/
Relevancy 13.33%

A few months ago my computer started crashing when playing games. The screen would turn either black, white, (or once pink), the fan/fans would max out, and the audio would just change to a loud buzzing sound. This would continue until the laptop was turned off.
Around that time, one of my hard drives was failing. We thought, seeing as it fitted so well, that it was the problem. I've just had the hard drives replaced, and while it was running perfectly for a few days, it has now started to crash again, and far more frequently. Most of the time just after the desktop loads.

I'm currently running in safe mode, and that's perfectly fine. No crashing.
I've tried disabling my audio drivers, and rolling back my video card driver, but with no success. I'm assuming that as safe mode has no problems that it must relate to a driver, or, some software, but I have no real clue what I'm talking about.

My video card is the NVIDIA GeForce GTX 580M, if that's important. No idea what other information to include. Thanks for any help anyone can give me.
 

A:Computer crashes increasingly often

Go to C:\windows\minidump. Minidump files have a .dmp extension. If there are any .dmp files, select them all and right-click, sending the files to a compressed(zipped)folder. Upload this folder as file here
 

http://www.techspot.com/community/topics/computer-crashes-increasingly-often.205623/
Relevancy 13.33%

Hello guys..I have a same a problem..I cant play any of my mouse in my laptop..can u help me to fix it..thank you so much.

Moderator note: Moved from this thread: http://www.techspot.com/community/t...t-computer-is-not-frozen.183253/#post-1430301
 

A:Can't move my mouse, but computer is not frozen

You can't use any USB mice in your laptop? How many have you tried?
 

http://www.techspot.com/community/topics/cant-move-my-mouse-but-computer-is-not-frozen.205615/
Relevancy 64.5%

What the title says. I bought a TP-Link WDR4300 and installed it, and everything works perfectly on every device except for my laptop (Windows 8.1 Lenovo G480, running Windows Defender as AV). When connecting wirelessly, I get access to the router, but it shows "limited", and it doesn't even let me get into the setup page (192.168.0.1) and when I ping it, every packet is lost. Ethernet, meanwhile, works perfectly. I'd appreciate any suggestions on how to fix it.

I'd like to attach the ipconfig outputs but my command prompt is in spanish and some of the characters are missing in the .txt file, too. I don't know how to get the file in english.

@jobeard I saw one thread you solved in which you said to mention you so you could help. I'd really appreciate it. Thanks beforehand for any and all suggestions.
 

A:WiFi doesn't work, Ethernet does

Hi, You will always have to use the ethernet (Cat 5) cable to get into your router's software, at 192.168.0.1, all routers are set up like that for security reasons.
It's done that way so that no one can change your settings, passwords etc using a wireless connection, you must use the Cat 5 cable to make setup & security changes.
Did you get any setup software with the TP Link router?
If you get good internet access using Windows 8.1 using the ethernet cable, it
might point to possible wireless driver issues.
It might be worth downloading the latest driver for your WDR4300 from the TP-link website;
http://www.tp-link.es/support/download/?model=TL-WDR4300&version=V1
 

http://www.techspot.com/community/topics/wifi-doesnt-work-ethernet-does.205530/
Relevancy 13.33%

Hello all,

I'm reading this (http://wps.pearsoned.com/ecs_kurose_compnetw_6/) networking book.
The exercise no 13 of chapter one says:

P13. (a) Suppose N packets arrive simultaneously to a link at which no packets are currently being transmitted or queued. Each packet is of length L and the link has transmission rate R. What is the average queuing delay for the N packets?

(b) Now suppose that N such packets arrive to the link every LN/R seconds. What is the average queuing delay of a packet?

I've obtained these for (a) and (b):

(a): (N-1)/2 L/R sec.
(b): For nth LN/R: [n(N-1)-2(n-1)]/2 L/R sec.

1- Are these answers correct?
2- Is here a correct place for posting such problems?
 

A:Computer networking exercises

My my; Network theory. Not to dampen your efforts, but unless there's a switch, knob, or parameter that can alter the outcome, there's little practical use of this kind of information IMO.

As an example of a practical issue, the SACKOPTS paramater greatly improves TCP performance.
 

http://www.techspot.com/community/topics/computer-networking-exercises.205528/
Relevancy 21.5%

Greetings. I typically use and love Microsoft's ergonomic keyboard. However I am pretty hard on my keys playing Star Wars, EQ2 and other games (alt+1, alt+2, ect). I love the feel of mechanical keyboards, love the springy-ness! I also really REALLY love the bent/split ergonomic design that Microsoft came out with. I can type soo much faster on it.

I have searched High n Low and I cant seem to find an ergonomic 'mechanical' keyboard.

So, is there such a keyboard on the market and where can I possibly purchase it?
 

http://www.techspot.com/community/topics/looking-for-an-ergonomic-bent-mechanical-keyboard.205511/
Relevancy 46.01%

Hello everyone Been having some crazy stuff going on with this new PC that I just built I cannot get it to startup at first try I just get a black screen and the BIOS welcome try always doesn't first second/third at (but does try) up PC boot at doesn t show up and neither does the windows startup loading of course When I manually restart it Power Button long press it runs just fine I have read that thousands of things could be potentially causing this from Hard Drive to Power Supply to graphics card but my actual bet is on RAM voltages overclock causing it since I recently overclocked it via BIOS setting the default frequency at mhz which is what my RAM offers at maximum and the max that my Motherboard can read The actual voltage is set to auto via BIOS which stays at V so I m not sure if lowering or raising it will solve the problem XMP is disabled not sure if that s relevant My BIOS is up to date My graphics card is old I m planning to change it soon but I didn t have any problem in the past with it Hard drive is also old but runs just fine I m open for any suggestions Specs - Tacens Mars Gaming W power supply - AMD FX- Eight-Core - PC doesn't boot up at first try (but always does at second/third try) MSI Gaming Motherboard http thepcenthusiast com msi- PC doesn't boot up at first try (but always does at second/third try) -gaming-am -motherboa - XFX ATI Radeon HD GB DDR - G Skill Ripjaws X DDR PC - GB CL x modules of GB Dual channel in slots amp - Hard Drive SATA II WD EADS- M B TB - Win - bit Some screenshots CPU-Z confirms I m running at mhz MSI Command Center does not get accurate frequency readings Thanks in advance for all the help If I forgot to mention something please tell me nbsp

A:PC doesn't boot up at first try (but always does at second/third try)

Check and make sure the wire cables are connected properly and not loose. Also, can replace CMOS battery and see you may able to access your computer.

P.S. Also check that the hard drive connection is set to UEFI under BIOS connection settings. Windows 8/8.1 supports only secure booting.

Good luck though!!
 

http://www.techspot.com/community/topics/pc-doesnt-boot-up-at-first-try-but-always-does-at-second-third-try.205119/
Relevancy 12.9%

Hello,

I'm really new to the tech/ computer world, and know next to nothing about graphics cards. I was wondering if someone could help me figure out what graphics card I can upgrade my computer to (if I can upgrade at all) I was wanting to buy the new Sims 4 game, but after having played a very slow and choppy Sims 3 for years on this computer, I'm ready to actually play a game smoothly without it freezing all the time.

Here's what computer I have:
Compaq Presario PC SR5601P
Processor: AMD Athlon X2 4400
Dual-Core Processor
Memory: 1 GB
Hard drive: 250 GB
Graphics: NVIDIA GeForce 6150 SE Graphics
Windows Vista SP 1

Thanks!
 

A:Unsure of what graphics card my computer can upgrade to

Sims 4 System Requirements & your PC system results

For Sims 4 according to the link above, your CPU GPU and memory is lacking for even the minimum system specs. We can recommend a GPU, but that's not all you need if you plan on playing Sims 4. And if you get a stronger GPU, chances are you will also need a stronger PSU. If 300W's is all you have for power, you are limited to sub $100 graphic cards. Which would be fine for Sims 4, but then you also have a CPU and memory that needs upgrading.
 

http://www.techspot.com/community/topics/unsure-of-what-graphics-card-my-computer-can-upgrade-to.205298/
Relevancy 17.63%

Hello,

I just finished assembling my first build. At first it turned on without a hitch, was able to install windows and a few drivers.

I had to restart a few times, which went fine for the first few times, and then it just didn't boot back up. The power button doesn't do anything, the fans don't start, nothing happens.

When I jump the psu, all the fans start, so I'm thinking the issue must be with the mobo..

Here's a list of all the parts I'm using : http://ca.pcpartpicker.com/p/JFVvD3

Thanks.
 

A:Mobo issue? Custom build won't start anymore

First, are any wires touching that might be causing a short such as a wire touching the back of the mobo? Second, I had something similar happen to me a few years ago with a new build. There is a tried and true though often tedious way that can help diagnose possible issues.

1. Remove all hardware except for one RAM stick from the motherboard and this includes Sata and fan connections to peripherals such as your SSD, etc,

2. Now see if the system boots with only the one RAM stick. If it boots then shut down add the second stick of RAM and then reboot. If it boots then repeat by adding a piece at a time.

3. If is doesn't boot then it is either your mobo or your power supply. Also, check to see if your heat sink is seated correctly.

BTW, nice little system there.
 

http://www.techspot.com/community/topics/mobo-issue-custom-build-wont-start-anymore.205000/
Relevancy 21.5%

My friend found this electronic sign. The ones with red leds that scroll a message across it. On the back is a connector marked keyboard. It looks like a Cat5 connector. Anyone know how that would work or what kind of keyboard/adapter he would use?
 

A:Electronic Sign Keyboard Connector

I know absolutely nothing about the Electronic Signs. The only thing I can do is share a link I found that may help. You can try Programming Alpha Signs Without a Keyboard which points to AlphaNet for Windows for programming software.
 

http://www.techspot.com/community/topics/electronic-sign-keyboard-connector.205333/
Relevancy 19.35%

My internet wont work, ive tried using both crome and IE but both browsers say that I am not connected to the internet despite the fact my computer says that I am connected to the internet. I know its not a network problem because my other devices are connecting fine. Also I tried connecting to the wifi at home and at school and it still does not work. My laptop is a HP ProBook 6390b and I am using windows 7. This problem started occurring after about 4 months disuse of my laptop which I think might be a factor as to why its not working. I have run windows updater and run a scan with my antivirus but still nothing helps. Thank you for any assistance in advance.
 

A:Internet wont work on laptop

Have you kept up and installed all the Windows 7 updates and are there any yellow (!) in the device manager?
 

http://www.techspot.com/community/topics/internet-wont-work-on-laptop.204944/
Relevancy 19.78%

I got a hp 6371it

link --> (http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02054227&tmp_track_link=ot_faqs/top_issues/it_i...

I have this problem: I bought a kingston Dimm ValueRam 4GB DDR3 1333MHz Non-ECC CL9 (it is compatible with my mb according to hp website). I installed it on my pc and:
1) if I install just that ram it works fine
2) if I install that ram I bought and one ore both ram I had already installed in my pc it doens't work or it blocks on hp main screen or it appears the classic blue screen of hardware error and it never enter on windows (it asks for a system reinstallation)
what is the problem? should I do something else? I tried mounting rams in different slots, I tried everything

please help!!
 

A:Compatible ram don't work

Sound as though the ram you bought is not compatible with the existing ram. Is the ram you bought the same specs as the old ram?
 

http://www.techspot.com/community/topics/compatible-ram-dont-work.205230/
Relevancy 15.05%

About a week ago, our cable internet connection went out. Before I had a chance to reboot the modem & router, my 11 year old decided to completely reset the router to factory settings! Ugh! This caused several issues: my home network is now gone, only a unsecured factory network is available. When I try to plug my laptop into the router via ethernet cord (in order to login to router and setup secure network) my computer will not recognize the router and won't connect to internet. I tried troubleshooting with my cable provider and they say it's in my computer (IP address will not reset) and he recommended I replace my network card. However, today when I brought my laptop to work, it will instantly recognize the wifi at work. So is it really my network card that is causing issues? Please help, I'm desperate and not tech too tech savvy!

Details:
Linksys wireless router
Charter cable modem
Hp pavillion dv6 laptop with Windows Vista OS
 

A:Laptop won't connect to home wifi but will connect to work wifi

Did you figure this out?
 

http://www.techspot.com/community/topics/laptop-wont-connect-to-home-wifi-but-will-connect-to-work-wifi.204978/
Relevancy 18.92%

Hi can any one help I cant hear any sound on my laptop its all turned up but when I conect it to my tv the volumes fine but soon as I disconnet from the tv the sound ont go.
 

A:Audio wont work on asus x53u laptop

Did you fix this?
 

http://www.techspot.com/community/topics/audio-wont-work-on-asus-x53u-laptop.204577/