Windows Support Forum

Dead Board or Cpu?

Q: Dead Board or Cpu?

Just got a used AMD64 3200 and a B-stock(claimed to be working) MSI Neo FIS2R. Put it together with 512MB DDR3200 ram and a Radeon 9800 pro. pressed the on button and nothing. No screen, no beeps, no IDE activity, not even the GFX card fan was turning. Just the CPU fan and the PSU fan and the light on the HD was on. Does this sound like a motherboard problem or a CPU problem?
Cheers
Ben.

Relevancy 100%
Preferred Solution: Dead Board or Cpu?

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Dead Board or Cpu?

no post?

first thing video Radeon 9800 pro has no post issues with some power supplys
don't know much bout the board can it handle the speed of the DDR

http://www.techspot.com/community/topics/dead-board-or-cpu.17516/
Relevancy 61.92%

heyo,

so the problem is that about four people went through troubleshooting this PC before it finally came to me. The backstory is one day computer is turned on, hard drive not reading, person #1 gets her to buy a new HD and so they install. Person #1 can't seem to get it to read, so person #2 starts putting software on it. Approx. 2 hours into it, computer just powers off. Person #2 passes to person #3 who says bad power supply and replaces it.

Now, I being #4, have a comp with a new HD and new power supply. When you hit power switch, all of the fans "twitch" for less than a second and then silence. That makes me think bad board, but due to the infinite things other people may have done so far, I hesitate to replace until I'm sure I've got a good grip.

Any ideas? Any direction would be sweet.

Rabbo
 

Relevancy 57.19%

I have a customers eMachines T1840 with a dead motherboard. Its a socket 478 with a Intel chipset:
Intel
FW82801DB
F2230129
SL66K

The computers part# is 511453

Trying to locate a replacement.

If you need more information from me let me know.
 

Relevancy 56.76%

I have trouble shooted my hp a4316f to find that the main board. M2n78-la has died this is a link to the board i currently have.

http://h10025.www1.hp.com/ewfrf/wc/...25562&lc=en&dlc=en&cc=us&product=4122179#N400

This is the board i am looking at replacing it with just wanting to make sure it should work

http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=6321553&CatId=5539

Thank you
Justin
 

Relevancy 56.76%

ASUS p4s133
sdram
no built in video card

when i connect the power supply, the board seems to be gud because the green led, lligths. . but when i switch it on, it doesn't turn on. pls help what seems to be the problem. . .
plssssssssssssssss heeeeeelp!!!!!!!!!!!!!!!!

A:[SOLVED] board is dead plsssssssssss

if the computer doesn't power on, then the PSU has failed and needs to be replaced.

http://www.techsupportforum.com/forums/f10/solved-board-is-dead-plsssssssssss-592747.html
Relevancy 56.76%

Hi New to this but here goes I have read all the help there is but this has me stumped I have an Asus A N Sli Deluxe mobo AMD with two Ultras and gb Corsair memory and x Maxtor Gb in raid run on a Antec truepower w Psu Have been running for yrs now Recently my power switch seemed to give trouble wont start then does temperamental as hell Now the system wont start at all Tried to bypass switch with reset one tried to jumpstart with screwdriver no luck Used a piece of wire in pins and and psu powers up all pins giving Sli A8N Deluxe board Asus Dead right current Used an old w psu and everything powers up but now no post Cleared the cmos with jumper pulled out mobo and set up outside case with only memory and graphics card plugged in still same Antec wont fire up and old psu works but Asus A8N Sli Deluxe Dead board no post screen I did Asus A8N Sli Deluxe Dead board flash bios a month ago with asus update and the machine has been purring beautifully Only thing i can think that was different was our lovely South African load shedding that crashed my PC during a game I then replugged in antec to mobo and placed the wire clip in from behind forcing power on but it wont post or stay on without wire clip Why can i jump my Antec to work but it wont power up with switch Why no post screen now i know the mobo has something like a crash free bios nbsp

A:Asus A8N Sli Deluxe Dead board

Your psu is failing.
 

http://www.techspot.com/community/topics/asus-a8n-sli-deluxe-dead-board.103678/
Relevancy 55.9%

Hi techies,

My dell inspiron 4000 laptop is not powering up. When I plug in the power supply to the wall outlet the battery lights up but as soon as I plug it into the laptop the light on the battery goes out. The part on the laptop where the battery is plugged in also smells burnt when I plug it back out.

Is this a battery problem or is it as I feared, the power section on the board is fried? Do I have to get a new laptop or can that part of the board be replaced?

Your help would be greatly appreciated.

Thanks

Orville
 

Relevancy 55.9%

trying to salvage a Packard Bell Windows 98 machine. The on board video (driver/card) appears to have died. The monitor does work (tried it with a different computer).

How do I install a new video card when a can't see to change drivers/Cmos/bios/etc.

I did try to plug in a new video card into the PCI slot. Of course the machine never seemed to detect that it was there.

Any suggestions.
 

A:on board video dead, no signal to monitor

Putting a new card in may not work as some BIOS's require you to tell them that there is another card there. You could try finding the CMOS reset jumper, which is usually near the battery/BIOS chip on the motherboard. Using that may reset it and tell it to use the card you put in.
 

http://www.techspot.com/community/topics/on-board-video-dead-no-signal-to-monitor.84733/
Relevancy 55.9%

The logic board on my Maxtor drive drive died and the drive no longer spins up. I replaced the board with one from a drive of the same model number and now the drive spins up but the heads thrash back and forth. I'm pretty sure this is because of different firmware etc.

Seagate says I have to have the same PCBA number from the same drive family, but there are a dozen different numbers on the drive and I don't know which ones to use. Can someone tell me which numbers I need and where to find them? My drive is a...

MaxLine Pro 500 SATA
Model: 7H500F0
P/N: 118032509 A01
TLA: 7H500F008A5EE AAA
SN: H80XYAJH
Code: HA431DD0
LBA: 976773168
WWN: 500107507401825A1

And if anyone happens to have the drive I need I will buy it from you
 

A:Maxtor drive dead. Need new logic board.

I suggest you try a data recovery service, or get the board from Maxtor.
 

https://forums.techguy.org/threads/maxtor-drive-dead-need-new-logic-board.609681/
Relevancy 55.9%

And now according to the support rep I have to mail it in and be without it for another weeks nbsp I got my T s in November used it every day for work and loved it until about a month ago when it simply didn't turn on and then the nightmare begins nbsp I took it to a Lenovo certified warranty shop who replaced the system board but still couldn't get it to power on nbsp He noticed I had on-site warranty so suggested I T440s again board dead 3 system replacements after use that nbsp A certified repairman came to my workplace replaced the system board and was able to make it turn on nbsp T440s dead again after 3 system board replacements It worked for about a week until one morning it no longer turned on nbsp Yet another certified repairman came to my workplace several days after that replaced the system board got it working again nbsp Less than hours later it no longer turned on nbsp At this point most companies I'm T440s dead again after 3 system board replacements used to dealing with would send me a brand new product with instructions for me to send in my broken laptop which is clearly a lemon nbsp Yet instead I'm told I have to send in my laptop and be without a computer for TWO weeks and then they MIGHT send me a new one if they can't fix it nbsp I'm generally a very patient person sometimes to a fault but this is unacceptable to me nbsp I paid a good amount of for this laptop including extended warranty because it's my work computer and I didn't want to risk being without it nbsp nbsp Does anyone have a suggestion for getting a better resolution of this issue

A:T440s dead again after 3 system board replacements

As much as I hate to say it. Escalate, Escalate, Escalate. Get ticket numbers and be a pitbull. I don't know if that will work but that is what I would do. Frankly, I am awaiting my delivery of a customized T440s, 3/24 is the delivery date, and I am getting nervous about quality and support. Like everyone else, we all paid good money for a premium laptop and the quality and support is dubious at best. IMHO. I am an avid Thinkpad user and have used many during my career. They used to be quite solid and trouble free. I am starting to wonder. It may have been better to have gone to BestBuy. At least there would be the option to walk in and tell them "I want a new one!"

https://forums.lenovo.com/t5/ThinkPad-T400-T500-and-newer-T/T440s-dead-again-after-3-system-board-replacements/td-p/1470574
Relevancy 55.47%

In a prior post I spoke of issues with video driver I had a exception; video...? on-board system dead service screen that looked like quot safe mode quot but was not intentionally in safe mode But that seemed to quot heal quot itself so I stopped looking for solutions - if it ain t broke right This past weekend the exception message that titles this post appeared This was not a bsod event in spite of terms used Additional message in separate window quot Could not load task list All task entries have been lost The error returned was attempting to deserialize an empty stream quot On re-boot those messages did not reappear and system seemed OK But now I m in serious trouble and it appears related to the earlier issue Machine sounds like it system service exception; dead on-board video...? s booting fans running lights on etc -- BUT I HAVE NO MONITOR system service exception; dead on-board video...? No system service exception; dead on-board video...? error messages just black screen as if it weren t even plugged in I have tried another good monitor and that doesn t work either Seems like the original video driver problem is at the heart of this So I tried booting to the original driver install disk but that won t work I cannot get to cmos to check boot sequence cannot even raise a DOS command line The machine is useless now and that s unacceptable Also obviously I cannot provide basic sys info It s now running W quot up quot from v x all updates including Norton antivirus etc More if needed PLEASE help me with this I think I still have iso burning capability on an old xp box if I need to make some kind of bootable disk -- but if it won t boot to it s own install disk Thanks in advance nbsp

A:system service exception; dead on-board video...?

Also, obviously, I cannot provide basic sys infoClick to expand...

Certainly you can; open the case and look. Nothing replaces the Mark 1 mod 0 eyeball.

If it is a big box system ie dell, hp, whatever, then it is even easier. Post the make and model# along with the service tag#
 

https://forums.techguy.org/threads/system-service-exception-dead-on-board-video.1158289/
Relevancy 55.04%

I've dropped something heavy onto the keyboard of my Tecra M9, which has ruined the motherboard. I've been told that I now cannot access data on my password protected hard drive (ie it requires a password before boot up) as it needs the motherboard with which this password created. Can anyone advise if this is actually the case, and how I go about retrieving the data?

A:Tecra M9 - Can I access password locked HD when the mother board is dead?

Hi

Sorry to hear about your M9 - it is a very nice unit!
Concerning the HDD - I do not think this is correct.
However, You will need to put the disk on SATA-connection in a system with a BIOS supporting HDD password.

That should bring up the password question at power-on and then let You access the HDD (after successfully entered the password).

I would consider some issues while trying to recover the data:

- putting the HDD in a different system as primary HDD will make booting problematic (unless it is another M9) so You will need to boot of something else.
- putting the HDD in a different system as a second (or non-primary) HDD might cause problems in case the BIOS is not very good so it can handle HDD passwords set on the non-primary HDD.

I would suggest creating a bootable CD/DVD/USB with some competent system on it (like a Live Linux distro) and have the HDD installed as primary HDD.
Turn on the unit, enter the proper HDD password and boot of the CD/DVD/USB to gain access to your files and transfer them to another external or internal HDD.

That's what I would do.

Cheers.

Tom

https://forum.toshiba.eu/showthread.php?60336-Tecra-M9-Can-I-access-password-locked-HD-when-the-mother-board-is-dead
Relevancy 48.16%

I have a Old Micron computer that was working OK when stored a year ago. Now the mounter is dead. Tried several good monitors and different cords. Is there any way to check the board or replace board from another computer ? Thanks Vic.
 

Relevancy 43.86%

amd xp (Long get issue?)....before Thread) call new I a fix ideas(power/board for Last board palomino on a ga- vt winxp sp i upgraded video ram in my computer and now i can t even get the old what was replaced stuff to work here s a few things to list install new vid card update drivers settings reboot no picture to monitor unistall reinstall card boot and monitor has picture install another gig of ram boot no picture take new ram out boot no picture take new card out put new card in boot no picture take new card out Last call for fix ideas(power/board issue?)....before I get a new board (Long Thread) put old card in boot no Last call for fix ideas(power/board issue?)....before I get a new board (Long Thread) picture take all memory out try known good stick in all slots boot and no picture put all back in boot no picture turn power on and watch the led fans run on my lb paper weight it s a never ending combination that i ve tried here and i cannot get a picture on this monitor i ve swapped monitors around and all are good i ve put components from this computer into another computer and they all worked something is not letting this thing boot up i get no picture to the screen and no beeps sounds or anything else i turn the computer on and you hear the fans hard drives and burners powering up and everything but there is no picture going to the monitor it sounded like bad memory because i ran into a case of that before but all the components still work when placed into the other computer my last guess is the board has gone sour i was reading other posts and people have mentioned the power supply but where do i check that at it s a codegen w ps came with the case which was also made by gigabyte i m assuming since it is stamped all over the place if i can t find help with that problem then how about some suggestions for a new board since my options have opened up some because i ve been told my pc sticks will work on board that are rated below that they just have to be able to take gb per slot here s the components - amd xp palomino socket a - maxtor gb hd - maxtor gb hd - x dl dvd r rw drive - x x cd r rw drive - floppy drive - mb ddr pci nvidia geforce mx - mb savageIII agp will probably be placed in storage - gb pc mhz ddr sdram - mb pc mhz ddr sdram i m leaning toward an asus board but the abit s are cheaper and i won t be asking a lot out of the computer except reliabilty sorry for the long thread but i can t think of anything else that would be wrong except board or power supply tia for your help - tag nbsp

A:Last call for fix ideas(power/board issue?)....before I get a new board (Long Thread)

https://forums.techguy.org/threads/last-call-for-fix-ideas-power-board-issue-before-i-get-a-new-board-long-thread.423093/
Relevancy 42.57%

Hello All I ve been having this issue while playing on Asus P4P800S-X Sound On-Board Board games lately I just got an Intel Ghz Prescott with Gig of DDR ram and I m now using an ATI Radeon by Sapphire MB DDR I dont have a sound card so I m using the one on-board that comes with On-Board Sound on Asus P4P800S-X Board the Asus P P S-X motherboard SoundMax While im playing a game after a reboot everything is fine for about a minute then the video starts lagging and lagging and getting worse and worse Its like it locks up more and more and the sound cuts alot To the point that its not even close to being fun playing anymore The game On-Board Sound on Asus P4P800S-X Board im playing is Guild Wars which requires alot less than I have I also talk on Skype at the same time and when I m fighting or more guys I cant even hear anything on Skype I have a mbps connection on cable And this is with the game graphics at the lowest Now get this If I disable the audio in the Bios and load up the game with full graphics smooth nice game play I ve tested playing a long time and its perfect with no lag at all Now I m guessing that is pretty conclusive Should I get a Sound Blaster Live or could it still be something else Conflicts Im also running windows xp sp Thanks for taking the time XeroVariX -- lt SYSTEM CONFIGURATION gt -- On-Board Sound on Asus P4P800S-X Board CPU Pentium GHz Mhz FSB MEMORY Gig DDR RAM MOTHERBOARD Asus P P S-X Intel Chipset Mhz FSB CASE Watt Power Supply VIDEO CARD Sapphire ATI Radeon MB DDR AGP HARD DRIVE Quantum Fireball GIG RPM ND HARD DRIVE Western Digital GIG RPM DVD-R DRIVE LG X DVD Burner SOUND CARD SoundMAX Integrated Digital Audio NETWORK CARD On-Board Realtek RTL Family PCI MONITOR Viewsonic quot M B KEYBOARD Key PS MOUSE Logitech MX Optical Mouse USB CONNECTION Mbit Cable OS Windows XP Pro Service Pack nbsp

A:On-Board Sound on Asus P4P800S-X Board

Have you loaded the motherboard makers sound chip drivers, or is it just limping along on the default Windows drivers? Might make a difference.
 

https://forums.techguy.org/threads/on-board-sound-on-asus-p4p800s-x-board.419647/
Relevancy 40.85%

ok bought a barebones pc of ebay Came with a pc chips board wouldnt post reset jumpers and after a week of trying to get it to work finally said it was ead and went and bought a MSI KT board thinking this will fix problem installed cpu and heat sink installed board into case and installed stick of pc turned it on but same thing happened as before board to msi board..same chips from problem pc with pc chips board fans on cpu and vga card from pc chips board to msi board..same problem spin but just a black screen rset jumpers to clear and reset back tried again still wouldnt boot checked to make sure it board wasnt touching case and shorting from pc chips board to msi board..same problem out but everything seems to be good there theres no beep codes same as with pc chips board KT board comes with a pci slot attachment with usb and led error light when i start pc the light stay on red In manual it says that means cpu is not installed correctly from pc chips board to msi board..same problem or either it is damages reseated cpu and used some artic silver but still same thing and led light stay red im thinking there was nothing wrong with pc chips board just like theres nothing wrong with msi board Could it be the power supply It has a cheap power supply HERCULES is the name on it it weighs almost nothing Ive tried different stick of memory and vga card only things that are comman with problem cpu a AMD Athlon XP mhz and this cheap power supply The problem has to be with either the cpu or power supply thats what im thinking nbsp

A:from pc chips board to msi board..same problem

If ur not posting and considering what u've done coupled with the MSI diagnostics it is very likely there is a problem with this cpu.
You need to get a hold of another compatible AMD cpu just to see if u can post, from there u can confront the ebay seller for any restitution ovr the cpu if there was any kind of guarantee offered at all with the purchased items.
 

https://forums.techguy.org/threads/from-pc-chips-board-to-msi-board-same-problem.242873/
Relevancy 40.42%

I m In a dilemma to need Dead 2 T2792 Supplies Ressurect Power Emachine Dead Help with An Emachines T I received the pc from a friend whom knows I work on PC s on the side when I plugged it in I found it to be stuck turned on The green indicator light was lit like 2 Dead Power Supplies need to Ressurect Dead Emachine T2792 Help it was turned on but no signal was stated on the monitor then after 2 Dead Power Supplies need to Ressurect Dead Emachine T2792 Help trying unsuccessfully to press and Depress many times did nothing so I unplugged and replugged in the same so I unplugged again and messed with button some more then replugged in nothing no green indicator light then i noticed a soft whistling and clicking sounds from power supply so I got another brand new power supply correct power supply when I plugged tower in it lit the green indicator light on tower then softly went out I tried pressing in power button nothing no response Now my question is I am pretty sure I need to buy another power supply now But I need some ideas on what to replace to get the pc up and running again would it be the switch or the motherboard nbsp

A:2 Dead Power Supplies need to Ressurect Dead Emachine T2792 Help

I had a similar problem with an emachines T2825. When I plugged it in, it automatically came on, and wouldn't turn off unless I unplugged it. It wouldn't POST or anything. After testing everything, I found out that the motherboard was bad. So that would be my guess, is that it could possibly have a bad motherboard.
 

https://forums.techguy.org/threads/2-dead-power-supplies-need-to-ressurect-dead-emachine-t2792-help.556254/
Relevancy 40.42%

Hi friends,
I have windows xp sp2 on 80gb harddisk , mother board mercury make,intel processor now this mercury mother borad what i have donot support ddr2 RAM, i had moved harddisk to intel motherboard box.

i am able to detect harddisk and windows apologies to start safe , last good menu and start normally and command prompt appears, i tried all options but fail to start windows xp.

MY IDEA IS AFTER LOGGING INTO WINDOWS , LOAD INTEL MOTHER BOARD DRIVERS.
Pl. find me solution to loginto windows and resume work.
THANK YOU

Regards
Vinod

A:moved windows xp sp2 harddisk from mercury mother board to intel mother board

welcome
you cant use the same xp on another motherboard.

http://www.techsupportforum.com/forums/f10/moved-windows-xp-sp2-harddisk-from-mercury-mother-board-to-intel-mother-board-354286.html
Relevancy 39.99%

Nothing happens if I hit WinX, and if I right click START cursor moves up and right a bit but nothing happens. Right click an icon, very poor response, yet shellexview shows nothing odd. Had separate issue - couldn't log into to other IDs, fixed that by copying clean DEFAULT from other Win 10 PC. I've done everything I can find, the DISM stuff, the reinstallation of 'window' apps. This appears to be a common problem. It used to work fine some weeks ago, don't know exactly when this started.

System is a laptop with 16gb ram, I7, HP with hybrid graphics, build 10586 / 1511 up to date HOME.

http://www.techsupportforum.com/forums/f338/winx-dead-also-right-click-start-button-dead-1099553.html
Relevancy 39.13%

Hi

my toshiba laptop was dead, the powerlight came on, the hard-disk was spinning but the screen remained blank.
I tried everthing , stripping it completely, trying a new ram and narrowed the problem to the motherboard or the cpu. i.e I can conclude that the problem is with the the mobo or the cpu.
This was a month ago.

Today I switched on again and voila! it worked, the bios loaded! I had removed the hard-disk, so switched it off, attached the HD and started it up again.. this time it didn't work. And hasn't since. I have again stripped it down , but it still doesn't work.
CAn anyone plzzzzz exlplain what is going here?? I mean it started , that means nothings fried, right??

Thanks

btw the fan spins for exactly 5 seconds before turning off.
 

A:Dead laptop came back to life, now dead again

there is something like a "hardware reset" available on many laptops.
- try to plug out everything except cpu and memory
- remove the battery and do not attach the power supply
- open the lid and hold the power on button for like 20 seconds
- plug everything back in and try to boot
that worked for me for some compaq and dell laptops which did act like yours

my two cents...
mscrx
 

http://www.techspot.com/community/topics/dead-laptop-came-back-to-life-now-dead-again.94468/
Relevancy 39.13%

I'm working on a 10-yr old HP pavillion pc. The pc would not turn on at all, monitor displays 'no signal'. the pc lights flicker. I had an older atx power supply and tried that- it worked. so I know that the old power supply was bad. the case was VERY dirty. almost all the vent holes were clogged. even after I tried my 'new' power supply, the cpu fan does not come on and I still get 'no signal' on monitor (the hard drive/cdrom drive DO come on). I'm thinking the power supply blew, taking the mobo with it. I don't want to spend alot of time on this, but can anyone offer any thoughts on this? thanks.
 

A:power supply dead;cpu fan dead,mobo?

A 10 year old system that you don't want to spend a lot of time on. What can I say?
 

https://forums.techguy.org/threads/power-supply-dead-cpu-fan-dead-mobo.362828/
Relevancy 39.13%

Computer was given to me because the cdrom was dead.
The tick of death started, so the harddrive is dead too(it is dead now sure)
XP licence is stuck under laptop.

Pity to throw this laptop away, I would liket to get XPback on, but failling that anything is accepted.
 

Relevancy 39.13%

hi sony vaio xp sp lots of peripheral usage we have front and rear usb ports digital cameras printers mp players one morning when switching the usb printer dead Solved: all dying...DEAD. usb ports....not cable from the laptop back to the front usb port on the desktop the computer froze and NONE of the usb s front or back have worked Solved: all dead usb ports....not dying...DEAD. ever since important to note is that we do lots Solved: all dead usb ports....not dying...DEAD. of plugging unplugging usbs for the above devices what we have tried to awaken our usb s keep in mind we are in the early learning stages of computer knowledge static discharge boot reboot safe mode reinstallation of usb root etc system restore didn t work no matter how far back we went last ditch chance is a system recovery so we bought an external hard drive and are backing up as with everything Solved: all dead usb ports....not dying...DEAD. we do not without problems but that is another post here in preparation for the recovery any other clear step by step advice for us thanks in advance nbsp

Relevancy 37.84%

*as Noel tidy beard would say?

i have just been given a 200Gb Western Digital HDDm which appears to be faulty
after connecting it it storts to whir as it spins, then makes a clicking noise (as though a gear has been dropped) and stops.

does this mean it's dead or could it be salvageable?

cheers
 

Relevancy 37.84%

GOOGLE CHROME HAVING PROBLEM WITH "MANIFESTO.JSON" FOLDER

A:GOOGLE DEAD WITH MASSAGE "HE'S DEAD JIM"

Hello, Welcome to BleepingComputer.I'm nasdaq and will be helping you.If you can please print this topic it will make it easier for you to follow the instructions and complete all of the necessary steps in the order listed.===Error: "He's Dead, Jim!"https://support.google.com/chrome/answer/1270364?hl=en===If you can download the version of this tool for your operating system.Farbar Recovery Scan Tool (64 bit)Farbar Recovery Scan Tool (32 bit)and save it to a folder on your computer's Desktop.Double-click to run it. When the tool opens click Yes to disclaimer.Press Scan button.It will make a log (FRST.txt) in the same directory the tool is run. Please copy and paste it to your reply.The first time the tool is run, it makes also another log (Addition.txt). Please attach it to your reply.===

http://www.bleepingcomputer.com/forums/t/573656/google-dead-with-massage-hes-dead-jim/
Relevancy 37.84%

Here s is hard drive When dead a dead not a first for me usually when a hard drive dies it s dead end of story I have had hard When is a dead hard drive not dead drives in my system A brand new one When is a dead hard drive not dead gig and since my bios doesn t support over the ish limit I used an overlay program to get the drive recognized Before this I also had hard drives all varying sizes with no overlay programs As each hard drive had an operating system I could access my bios setup and boot from either of the three After I installed the gig with the ezbios yes I installed it on the other two drives as well everything was happy except for the fact I could no longer boot independently to the other drives When is a dead hard drive not dead I thought no biggie Still everything happy This morning turned on computer tried to access the gig hard drive for some files and the click click hard time trying to access but finally it did sooooooooo then I rebooted and guess what no gig drive Wonderful disconnected the other drives tried to boot to that one no operating system rebooted again physical medium error not going to be a good day Tried booting with a boot disk fdisk politely tells me no fixed c drive present lovely Downloaded the recovery program recommended by Slithy thanks hope you re reading this too and it would not even acknowledge that the drive existed The drive was still being seen in the bios correctly Downloaded the Maxtor drive diagnostics and got all the lovely you re in deep doodoo error messages so went to the RMA site and proceeded to request RMA as the drive has one more year on warranty There REALLY isn t that much on the drive of importance As the RMA page needed info from the top of the drive I removed the drive from my system it was quite warm to the touch but I didn t give that too much more thought A few hours later I thought what the heck I m going to try it in my other computer before I call in the chariots and it boots up after running thru scandisk warning me of shutdown errors and requesting I run scandisk in Windows I am now transferring files over the network to another hard drive Any ideas why it would report dead in so many ways and then boot up like nothing happened And I didn t even put it in the freezer God I hope Alex Ethridge doesn t see this thread he ll blame it on my overlay program nbsp

Relevancy 37.84%

Hi all, I've been through 3 harddisks now on my 3 year old system(8800 gt, 4 gb ram, e8400). Every (aprox) 6 months my harddisk dies(I think). On boot the bios will only read my two dvd drives, then proceed to "checking ide drives" and check for abnormally long time, and finally the nvidia boot agent fails to boot and I get some mac adress showing up in bios before I have to shut it down. What can be the cause to all my dying hdd's?

I tried:
Replugging the sata cable and try different slots.
Checking if there is any hdd in under the voltage perimeters on bios and I can't seem to find my hdd anywhere!
Can a faulty sata wire even be the cause?
Help! Thanks
 

https://forums.techguy.org/threads/harddisk-dead-cables-dead.837145/
Relevancy 37.84%

Ok heres my issue I have a wireless lan setup I my Is Brain being I Dead Dead? am Router or am using a Linksys router WRT GL This router was working fine for the longest then one night a power shortage hits it comes back up and everything seems fine But Is my Router Dead or am I being Brain Dead? now my LAN game cannot play I had a heck of a time setting it up to play and finally had been using Hamachi so I could create a makeshift VPN and have my friend play with me over the net So my setup was like this PCs behind a router played with PC on the internet One of the PCs behind the router would ALWAYS host Hamachi worked perfectly and everything would work so long as the firewalls were down Then that outage happened and I could no longer play My problem is I cant even play locally so now I know something is up with my router At least I think something is up I have tried everything my LAN is working I can share files and folders between the two PCs and ping them But as soon as I go to play the game Neither computer sees the other persons game I am in utter AWE and shock cause I have tried everything I want to purchase a new router to see if thats the problem but I am not sure what to do My router allows me to go online ping the each other and even share files So I am really at a loss Does anyone know any program I could use to monitor ports and whats happening when the game starts Or maybe a networking consulting company in the NY NJ area Im really desperate at this point and wouldn t mind paying for this solution cause its frustrating Its one of those problems where ya know you can fix it but when ya get into it its sucks hours out of you nbsp

A:Is my Router Dead or am I being Brain Dead?

If I were you I will try to reconfigure the router after you upgrade the firmware of your Linksys and try to play online again
 

https://forums.techguy.org/threads/is-my-router-dead-or-am-i-being-brain-dead.557099/
Relevancy 37.84%

NO viruses found from using AVG free top IE dead Desk launch also won't dead edition After I downloaded again My IE sp isn't in the program lists anymore the files are there but ie won't reinstall My spyware is spybot search and destroy and Ad aware se neither one will launch Highjack this works and don't come up with anything new Error fixer works and the same nothing new No Email working either except my direcway email Error when trying to launch IE or other applications on Desk top is Wininet DLL file is linked to missing export Shlwapi dll ShregGetValueW I am running Win se and thank goodness I am on Direcway and using firefox browser otherwise this computer would make a good target on the shooting range I have tried everything I can think of to correct this problem I can download downloads but can't launch Error also says my internet connection is'nt there I am on Direcway satillite and it is working because my Firefox is working great HELP

A:Desk top dead won't launch IE dead also

How old is ur computer for one? I would suggest just backing up anything you need from this computer and fdisk your hard drive and start fresh. If you computer has the specs...i would suggest goin to XP.....98 is way to old anymore and has too many vulnerabilities. Thats what i would suggest, it will take less time then finding out all the stupid missing IE errors and all that stuff.

http://www.techsupportforum.com/forums/f56/desk-top-dead-wont-launch-ie-dead-also-91101.html
Relevancy 37.84%

Hello

Lately, my pc had high temperature problems, obviously caused by lot of dust, stored on the cpu cooling system.
So I decided to clean the mess!
I removed the cpu cooling system, the cpu, cleaned everything, and put them back together. I have done this many times, but this time I forgot to apply thermal paste, on the cpu surface.
After the power on, I got only fan activity, no beeps and black screen only.
I checked the cpu on another pc and it appeared to be dead.

I would like to know: Is there any chance for other parts(mobo, vga card, memories) to have been damaged?

Also, I have a spare cpu, little slower than the previous, same socket although. Is there any danger to damage the spare cpu, if the mobo is already damaged?

Thank you in advance.
 

A:Cpu dead?? Mobo dead?? All dead??

READ: http://www.techspot.com/vb/topic53866.html
 

http://www.techspot.com/community/topics/cpu-dead-mobo-dead-all-dead.88551/
Relevancy 36.12%

I have a Compaq Persario A Laptop Vista Home Premium Dual Intel CPU T GHz Disk Drives Generic-Multi-Card USB Device Hitachi HST K SA USB Controllers Intel R ICH Family USB Universal Host Controller - Intel R ICH Family USB Universal Host Controller - Intel R ICH Family USB Universal Host Controller - Intel R ICH Family USB Universal Host Controller - USB Mass Stroage Device YES it is misspelled USB Root Hub USB Root Hub USB Root Hub USB Root Hub It appears and are not working My laptop has two USB ports on the right side they stopped working last dead! needed. It's port dead last USB Help port. my dead year and was never able to get them to work again On the left side I have one USB port and a multi-card reader Now the last USB port has suddenly stopped working The Enhanced USB Controller in Device Manager controls the multicard USB port dead dead dead! Help needed. It's my last port. reader and the built-in webcam This works fine The other USB port on the left side of the computer just above the multicard reader does have power When I plug in my external HD the lights come on but it will not recognize it as a drive being there I ve gone into device manager and uninstalled and reinstalled I ve disabled and enabled There is nothing in this computer s BIOS to enable any USB device I have updated drivers I have scanned for hardware changes I ve also unplugged and removed the battery and let it set overnight and still nothing I ve also added Add the ForceHCResetOnResume registry value for the USB host controller as described below Click Start type regedit in the Start Search box and then click regedit exe in the Programs list Locate and then click registry subkeys that resemble the following HKEY LOCAL MACHINE SYSTEM CurrentControlSet Control Class FC E -C - CF- - Four-digit number Notes In this step Four-digit number is a placeholder for the USB devices in the system In this step you must locate the registry subkey by using the value that you noted in Step j For example if the driver key from Step j is fc e -c - cf- - then you must look for HKEY LOCAL MACHINE SYSTEM CurrentControlSet Control Class FC E -C - CF- - On the Edit menu point to New and then click DWORD Value Type ForceHCResetOnResume for the name of the DWORD and then press ENTER Right-click ForceHCResetOnResume and then click Modify In the Value data box type and then click OK I ve also added - http support microsoft com kb Disable the Selective Suspend feature follow these steps Click Start and then click Run Note If you are running Windows Vista click Start and then use the Start Search box Type regedit and then click OK Registry Editor opens Locate and then click the following registry subkey HKEY LOCAL MACHINE System CurrentControlSet Services USB If the DisableSelectiveSuspend registry entry is present double-click it If it is not present create the entry To create the entry follow these steps On the Edit menu point to New and then click DWORD Type DisableSelectiveSuspend and then press ENTER On the Edit menu click Modify In the Value data field type to disable the Selective Suspend feature and then click OK Still only powers up my external HD but does not recognize it as a drive Nor does it recognize any other USB device Heeeeeeeeeellllllllllllllllppppppppppp As you can tell I ve done all I know to do at this point Deb nbsp

Relevancy 34.83%

Working on a computer which won t POST I have Dead dead CPU? MOBO or it narrowed down to the mobo or CPU but before I start sending things in for warranty work I would like to find out for sure which Dead MOBO or dead CPU? piece is dead The only thing I really have to go on is this When I press the power button the PS and case fans spin but the monitor light stays amber and the CDRW drive blinks When I swap the power supply for another good one I don t even press the power button and the fans will quot tick quot Meaning that they turn a quarter inch then stop turn a quarter inch then stop etc When I press the power button with this PS connected nothing turns on The ticking makes me think it s the mobo but I am unsure Is there anything else I can do to test either piece out It s a socket mobo cpu and I don t have another CPU to test with Thanks nbsp

Relevancy 34.83%

Hello everyone I gave my PC to my yrs niece she Motherboard or both? dead? CPU's dead? used for only days and boom The whole thing dropped dead I have been using for almost year without any major problems The spec - PIII MHz overclocked to MHz - MB PC SDRAM was on MB but I took out MB when I gave it away - Motherboard is Gigabyte GA- VX - X chipset VT CPU's dead? Motherboard dead? or both? C X VIA Apollo Pro A - VT C A - Inno D GeForce MX MB DDRAM - The rest is just standard CDROM X FDD amp GB HDD - W PSU I have taken the extra fan in the back of the PC out when I gave the PC to my niece - Was running Windows but I installed XP Home Ed coz my niece likes it According to my niece - when I asked her what happened - It was quot working fine last night but not today quot sigh after lot of promises that I won t get crossed if she tell me the true she said she was playing CD music then the machine hang so she put restart done that a few times and then the whole thing gone sighhhhhh Now when it turned on no signal sending to the screen screen stay at black - standby mode although the CPU fan the graphic card fan amp PSU fan still running the orange light on motherboard is on per normal no beeping at all from the m b to indicate that something has gone wrong i e RAM is not working light in the front panel is not light up when I press the quot Reset quot button I can see the green light underneath the HDD is turn on then off I reset the clock back to MHz but nothing changed replace the graphic card but monitor stayed at standby mode I thought based on experiences from the past that the CPU is fried overheat coz I took the back fan out hence system freeze I went to buy another CPU this time is a Celeron GHz Micron FC-PGA replace the PIII MHz but nothing changed the whole thing remain the same CPU fan Graphic card fan and PSU fan start up as soon as I plug in the power cord can t turn off by using the power button the front panel and the LED in the front panel is off What do you think the problem is The motherboard this time Please help Thank you for your time and advice PS Monitor tested on my other machine and it works fine so the problem is not from monitor nbsp

Relevancy 34.83%

I build a computer last December see below this was the recommend build for AMD at system went dead dead...really the time It s been working fine until today I system went dead...really dead put the system to sleep for a while and when I tried to wake it no response so I powered down and did a restart Absolutely nothing happened HD light went on for about a second and then nothing All fans spin and that s about it Couldn't get the BIOS to come up So I pulled the cover and checked all connections and even tried to boot from system went dead...really dead a different HD Still nothing This is when the panic starts to set in I decided to try unplugging the system and waiting a few seconds and when I did it booted normal and everything is cool Any idea what s going on here Should I be concerned that I have a component going bad Does unplugging the PS reset something I m stumped x ASUS HD - GD Radeon HD GHz Edition GB x Microsoft Windows - -bit - OEM - OEM x AMD FX- Zambezi GHz Socket AM Quad-Core D x ASUS M A LE R AM AMD SATA Gb s USB x G SKILL Ripjaws X Series GB x GB -Pin DDR x Seagate Barracuda ST DM GB RPM MB C - OEM x XFX Core Edition PRO W P - S-XXB W ATX x ASUS X DVD Burner - Bulk X DVD R X DVD RW X - OEM

A:system went dead...really dead

Possible the Psu needed to recycle and it would have started after a while anyway but your plugging and unplugging speeded that up is all, but that is what it sounds like.

http://www.techsupportforum.com/forums/f299/system-went-dead-really-dead-829410.html
Relevancy 34.83%

I have PC: PSU? Dead Dead, Totally a friend whose PC has as of late been experiencing failure to Dead, Totally Dead PC: PSU? come out of hibernation Instead of shutting down Dead, Totally Dead PC: PSU? at the end of the day the user would simply put the PC in question into Hibernation This could go on for long periods of time days at a time without a shutdown or reboot The problems started with the resume being very very slow when the keyboard and or mouse was used to quot wake up quot the PC and then finally the PC stopped resuming from Hibernation altogether When this would happen the PC was shut down hard and rebooted That worked for a while but the reboot was extremely slow or the PC would refuse to boot into Windows Dead, Totally Dead PC: PSU? At this point in time the PC refuses to restart at all By failing to restart I mean the PC is DEAD No fans spin-up when the power is turned on no blinking lights absolutely nothing happens Think quot doornail quot Without me having had a chance to look at the PC itself my first assumption is that the PSU is simply shot and needs to be replaced this is an eMachine we re talking by the way model and spec s unknown to me right now I have an old motherboard lying around with a CPU HSF a video card and I might have a stick of RAM lying around that would fit Could I double-check the PSU on the dead PC by connecting the main power connection to this older mobo to see if in fact the PSU is dead I m assuming by connecting the main power connector that when I switch on the PSU the HSF and fan on the video card would at least spin up or not telling me for sure if the PSU is dead and needs to be replaced or not Correct Also anything else that you could suggest that might cause the symptoms described Suppose it s NOT the PSU What else should I look at I ll check the obvious things of course like connections and so forth but any other ideas Thanks in advance nbsp

Relevancy 34.4%

Our printer should have an odometer....

Is there any way to tell besides trial and error whether the original printer cable needs replacing or the printer needs replacing?
 

Relevancy 33.54%

So Dell made a really terrible 15 Series power 15 Can a board power board? a with Inspiron Dell Dell I Series Inspiron 5000 replace 7000 decision nbsp They have a transparent strip in the power button for an LED light to indicate if the power is on nbsp A power indicator is a given in any laptop no matter how cheap it is nbsp However Dell in all of it Can I replace a Dell Inspiron 15 5000 Series power board with a Dell Inspiron 15 7000 Series power board? s genius decided to not include an LED bulb on laptops up to the Inspiron Series despite leaving a transparent slot for it nbsp Seriously what happened to this brand nbsp Do children make these laptops now I want to fix this as my laptop is no longer returnable and a power indicator is absolutely necessary nbsp So the only thing I can think of is replacing it with one from the Series somehow Can I replace a Dell Inspiron 15 5000 Series power board with a Dell Inspiron 15 7000 Series power board? with some help probably This is a Dell Inspiron nbsp I also have an Inspiron nbsp Not sure which exact model I should get the part for Are they compatible Is there an easier way Like how Fn H turns on the hard drive indicator Thanks

A:Can I replace a Dell Inspiron 15 5000 Series power board with a Dell Inspiron 15 7000 Series power board?

The systems use different case and mainboard designs -- and may even be made by different companies.  The answer in all likelihood is no.
I don't think Apple has produced a Macbook with a power indicator -- the PC vendors are playing follow Apple.

http://en.community.dell.com/support-forums/laptop/f/3518/t/19981673
Relevancy 30.53%

okay for a while now i screwed my computer over and i burns it lol so i was useing my laptop ( i gave to my dad ) until i get a new comp. i hate typeing on the lap top key boards because i keep hiting the mouse my mistake and it jumps lines ( built in mouse ) and so i connected a USB kep board to it, now that when i un-plug the USB key board the original key board is F***ed like when i hit p its puts a - and its realy anoying and my dads going to be realy mad, can you help me fix it?
 

Relevancy 30.53%

Epox 8K7A, refurbished or at least returned once, installed
in comp II and seems fine except for one thing. I can't get
it to read bootdisk from A. A drive is okay, so says screen.
Bios is navigable. Did I get a bad board?? Can anything
be done? Anyone ever seen this particular problem. Is Epox
a name to stick with or are they known for bad boards, i.e.
pcchips??

Not real pleased,
Eric
 

A:Bad Board??

Hi there,

Noooo, don't get rid of the Epox board. I have an Epox CU133A+ and it's fantastic and has been running brilliantly for over a year.

I had a similair problem once though. Tell me, is it just a boot disk it wont read or is it all floppies? Does it automatically ask if you'd like to format the disk?

If so, it sounds more like a processor fault unfortunately.

Also, I know this is a stupid question, but on boot up have you set your BIOS to try to boot from A: ? If not, do this or try boot from A only.

Write back and tell me your findings.

Thanks,

Peaker.
 

https://forums.techguy.org/threads/bad-board.82371/
Relevancy 30.53%

I have 2 keys on my keyboard that don't respond when hit. They are the letter B & N. Any ideas on whats causing this? Tried using different key board
with same results

A:key board

try a system restore to a previous date when it was working fine...you may have added or removed software recently that corrupted your keyboard driver did you say you tried a USB keyboard too and it did not work or vice versa if your original keyboard is a USB keyboard,,,then did you try a PS2 Keyboard and it did not work either...

http://www.techsupportforum.com/forums/f10/key-board-452712.html
Relevancy 30.53%

HI I HAVE JUST INSTALED A VERSION OF WINDOWS XP HOME ON A FRIENDS
LAPTOP AMILO L7300 WE HAVE A PROBLEM THAT WHEN WE ARE TYPING IT GIVE SOME WRONG CHRATERISTICS TRIED THE NUMBER LOCK AND THE FN KEY STILL HAVE SAME PROBLEM

http://www.techsupportforum.com/forums/f10/key-board-461965.html
Relevancy 30.53%

I have a gigabyte ga-m57sli-s4 and I was looking at going to an AM2+ processor at some point in the future. Have to figure out other problems first. I know the board will "work" with the newer AMDs but Gigabyte says:

(Note) If you install AMD AM2+ CPU on AM2 motherbord, the system bus speed will downgrade from HT3.0(5200MHz) to HT1.0(2000 MT/s) spec; however, the frequency of AM2+ CPU will not be impacted.

What does this mean exactly? Would a quad or tri with this impact act any better than my x2 5000 black (currently OC to 3.1). Do I need a newer board to run these in any way that will show gains.

I guess the main reason I'm asking is that Vista says my CPU has the lowest performance index of any of my parts. Like your thoughts. Thanks.
 

A:AM2+ in AM2 Board

It means that the HyperTransport link (the bus which connects the CPU to the rest of the system) will not be as fast as possible. I don't think it will bring a performance degradation on a desktop system though.
 

http://www.techspot.com/community/topics/am2-in-am2-board.108620/
Relevancy 30.53%

eTrust anti-virus from CA inc is offering for FREE their ezArmor suite. ($49.95 value). Free updates for 1 year. This, IMHO, is a very good A/V and firewall program. Go HERE This is a CA and Microsoft offer. After 1 year, you pay only the renewal fee.
 

A:To all on the Board

Emtronics,

Thanks for this and all the good tips you give all year round.

Season Greeting.
 

https://forums.techguy.org/threads/to-all-on-the-board.185451/
Relevancy 30.53%

This may not be the right place to post this but its close enough.

I need microphone help.

For the past few months my microphone just hasn't been working online! I have no clue why and nobody seems to be able to help me.

Its not because its muted or anything like that. We had a mic and it used to work but one day it just didn't work anymore so I bought a new one and that doesn't work online either.

It works fine with sound recorder, and with any voice test things for any applications, but whenever I enter an online game to use it, it seems to just shut off and disappear completely. It works while msn is running but whenever I click "start an audio conversation" it shuts off.

I am starting to get very agrivated so if you could help me out I'd appreciate it.

-Flea
 

https://forums.techguy.org/threads/perhaps-not-the-right-board.178195/
Relevancy 30.53%

I'm probably looking right at it & can't see it. I usually see it at the top of other forums. I see 'forum rules' right away but not a list of 'how to's' which is what I need.
Thanks.

A:Where is board help

What help do you need with the forum?

Post it here.

Or look in the Tutorials.
http://www.sevenforums.com/tutorials/

http://www.sevenforums.com/general-discussion/230624-where-board-help.html
Relevancy 30.53%

i built a computer with good specs... im very desprite so i cant type them up but it cost me over 3,000 dollars

its a athlon 3200XP+
asus motherboard
2 GB low latency corsair ram
500psu power supply
you know, all that good stuff

last night i was experminting with overclocking.. i did some voltage settings and it ran very fast, extreamly fast i liked it. well i got greedy and increaced some settings even higher and now IT ISNT BOOTING UP!!!! i cleared the cmos and everything i can think of.. im panicing out of my mind because
IM IN SO MUCH TOUBLE THIS ISNT MY COMPUTER!!

i tried different processors and ram
did i ruin the motherboard!!

any advice at all is helpfull!!!!
 

Relevancy 30.53%

HI i was wondering if i could change the pc board in my laptop to an hp 688277-501 pc board.

A:need new pc board

Yes you could. Here is the Manual: Manual See p. 16. This would upgrade you from the E-300 processor to an E2-1800 which is a slight upgrade but still an upgrade. All other parts will be transferrable...memory heatsink wi-fi card etc.  If you need any more help post back If this is "the Answer" please click "Accept as Solution" to help others find it. 

http://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/need-new-pc-board/td-p/5641079
Relevancy 30.53%

To start things off I would like to say hello to everyone on the board. My question that I ask of you is how can I get my print screen to work. I was just wondering if anyone knew any programs to get screen captures or shots while watching DVD of Windows Media Player. Now I tried to hit the print screen button and pass it to paint but it acts as if isnít anything there and gives me a black image where the DVD or media player was playing. I also down loaded the free print screen deluxe from download.com and it still didn't work. My last computer ran 98 and it worked fine, now that I have XP it wants to act stupid. Could you guys help me out if you can, it would be a big help.
 

Relevancy 30.53%

I am getting a Core i7 860 tomorrow. Also a Gigabyte P55-UD4P motherboard and some Mushkin 1600 RAM (7-8-7-20)

It should give me a couple of years of good use. (I hope)

Has anyone got a P55 setup yet. Anything bad or good you have heard about the platform.

I like to try new things. I could have got the i7 920 and a decent X58 board. that's boring. haha

I am hearing the i7 860 is right up there and even outperforms the 920 in some cases.

Anybody have any experience with Mushkin RAM? I was told to try it out. My friend seems to think I will be pleased with it.

I'm also wondering if anyone has a P55 board you have run into anything strange.

Thanks

A:Anyone have a P55 board set up yet?

I don't have one (yet) but I have only heard great things about the P55 chipset and especially the i7 860 processor. Be sure to let us know how it goes

http://www.sevenforums.com/hardware-devices/25011-anyone-have-p55-board-set-up-yet.html
Relevancy 30.53%

Could someone plese tell me how to input the power signs in algebra (windows 7). 3 to the power of 4
 

A:key board uses

Use the karot key (Shift - 6): ^. ex: 3^4
 

https://forums.techguy.org/threads/key-board-uses.958313/
Relevancy 30.53%
Q: board

I nbsp bought an HP spectre notebook nbsp and purchased an HP nbsp accidental damage plan waranty and year Care Pack This plan covers accidental liquid spills nbsp It has no exlcusions based on the type of liquid spill NONE nbsp THERE ARE NO STATED EXCLUSIONS FOR BIOHAZARDS IN THE POLICY ACCORDING TO HP nbsp I was at a coffee shop and a friend bumped the table and knocked over water coffe and tea It spilled all over my computer There were many witnesses nbsp keys on the computer stopped working after this liquid spill I contacted HP and they offered to board send on site repair staff but I couldn't take hours off of work board to wait for them to come HP preffered for me to send in the computer anyhow They confrimed the liquid spill of coffee tea and or water is a covered board event nbsp They sent me a box and I mailed the computer back in to them I took photos of the computer condition before shipping It was dry on the outside and we had shaken out as much of the liquid as we could I sent the computer in When it got there I immeidately got an email about a cracked LCD It did not have a cracked LCD when I shipped it and it was well packed nbsp I called them and they said someone would get back to me nbsp I then got a text about an hour later stating my computer was being shipped back to me I figured it had been repaired They gave no info about the computer itself nbsp I got the box on April th There were no biohazardous or dangerous material labels on the outside of the box I opened it and pulled out my computer The inside of the box was wet the computer was dripping with a whiteish brown liquid that smelled of coffee nbsp I immeidately took pictures and emailed them to HP to tell them they shipped me back my broken computer they need to fix it I figured the liquid on it was some of the spilled liquid that had shaken out of the computer on shipment The liquid had been all over my hands It seemed like an awful lot of liquid I had the photos to show I shipped them a computer that was dry on the outside nbsp I called HP and they informed me they had assessed the computer and had determined nbsp there was a nbsp dangerous biohazard liquid on it and they could not repair it because the liquid posed a safety and health risk to their staff nbsp I looked in the box and saw a soaked white piece of paper with biohazard checked off as a reason why they would not fix it This alleged biohazard was all over the notice itself and was all over my hands nbsp I had a complete nevrous breakdown and had to get medical care nbsp I called HP and they did research and determined their service center thought the white brown liquid was urine HP further accused the coffee shop of selling us drinks with urine in it I went to the health dept and had a friend who is a biochemist assess the situation All agreeed it was coffee not urine and HP was making serious and very wong accusations they had no basis to make All agreeed HP was trying to pull whatever they could to get out of a covered repair I called HP again and they looked at their own photos and they agreeed there was an error made by the service center and they agreeed to re-assess the computer nbsp They sent me a box to mail the computer back to them That box arrived May nd and I sent in the computer documenting the condition of the computer throughly and sealing it up at the FedEx office I did not put biohazard labels on it becaus emany witnesses and professionals had determined it was not a biohazard and never had been nbsp HP signed for the computer on May rd On May th HP agreed to refund the full amount of the computer and said they would send me a box to send the computer back to them in I pointe dout that they already had the computer They signed for it on May rd HP wrote me on May th to tell me they had searche their records and nbsp they again claimed there nbsp been a biohazard and the computer was shipped back to me on April th They told me the case was closed and indicated nothing abou... Read more

http://h30434.www3.hp.com/t5/Notebook-Operating-System-and-Recovery/board/td-p/5611850
Relevancy 30.53%
Q: board

Laptop under warranty, including accidental damage, until spring, 2016.  Sent it for repairs...blotches on screen and keyboard failure 4 days ago.  Received it back today, july 10, w/ a note claiming device contains "biohardous material" and cannot ever be repaired by HP due to health danger to support techs.  What the hell sort of biohazard can a computer contain?  I'm elderly, live alone, keep the device on a table by itself.  There is no radioactivity within hundreds of miles of here.  I have NO health issues which would constitute a biohazard: early cataract, mild depression, occasional insomnia, high blood pressure.   What constitutes a biohazard so dangerous that a tech's health might be endangered?  I'm on a fixed income and cannot afford another computer.  I am at a total loss.  Is this some scam to avoid honoring a warranty on a not-too-popular device?  Please advise.  Thanks!    

A:board

I bought an HP spectre 360 notebook and purchased an HP accidental damage plan waranty and 2 year Care Pack. This plan covers accidental liquid spills. It has no exlcusions based on the type of liquid spill. NONE.  THERE ARE NO STATED EXCLUSIONS FOR BIOHAZARDS IN THE POLICY ACCORDING TO HP. I was at a coffee shop, and a friend bumped the table and knocked over water, coffe and tea. It spilled all over my computer. There were many witnesses. 3 keys on the computer stopped working after this liquid spill. I contacted HP and they offered to send on site repair staff, but I couldn't take 6 hours off of work to wait for them to come. HP preffered for me to send in the computer anyhow. They confrimed the liquid spill of coffee. tea, and/or water is a covered event. They sent me a box and I mailed the computer back in to them. I took photos of the computer condition before shipping. It was dry on the outside and we had shaken out as much of the liquid as we could. I sent the computer in. When it got there, I immeidately got an email about a cracked LCD. It did not have a cracked LCD when I shipped it and it was well packed. I called them and they said someone would get back to me. I then got a text about an hour later stating my computer was being shipped back to me. I figured it had been repaired. They gave no info about the computer itself. I got the box on April 27th. There were no biohazardous or dangerous material labels on the outside of the box. I opened it and pulled out my computer. The inside of the box was wet. the computer was dripping with a whiteish brown liquid that smelled of coffee. I immeidately took pictures and emailed them to HP to tell them they shipped me back my broken computer, they need to fix it. I figured the liquid on it was some of the spilled liquid that had shaken out of the computer on shipment. The liquid had been all over my hands. It seemed like an awful lot of liquid. I had the photos to show I shipped them a computer that was dry on the outside. I called HP and they informed me they had assessed the computer and had determined there was a "dangerous biohazard" liquid on it and they could not repair it because the liquid posed a "safety and health risk" to their staff. I looked in the box and saw a soaked white piece of paper with "biohazard" checked off as a reason why they would not fix it. This alleged "biohazard" was all over the notice itself, and was all over my hands. I had a complete nevrous breakdown and had to get medical care. I called HP and they did research and determined their service center thought the white/brown liquid was "urine." HP further accused the coffee shop of selling us drinks with urine in it. I went to the health dept and had a friend who is a biochemist assess the situation. All agreeed it was coffee, not urine, and HP was making serious and very wong accusations they had no basis to make. All agreeed HP was trying to pull whatever they could to get out of a covered repair. I called HP again and they looked at their own photos and they agreeed there was an error made by the service center and they agreeed to re-assess the computer. They sent me a box to mail the computer back to them. That box arrived May 2nd and I sent in the computer documenting the condition of the computer throughly and sealing it up at the FedEx office. I did not put biohazard labels on it becaus emany witnesses and professionals had determined it was not a biohazard and never had been. HP signed for the computer on May 3rd. On May 4th, HP agreed to refund the full amount of the computer, and said they would send me a box to send the computer back to them in. I pointe dout that they already had the computer. They signed for it on May 3rd. HP wrote me on May 5th to tell me they had searche their records and they again claimed there been a biohazard and the computer was shipped back to me ... Read more

http://h30434.www3.hp.com/t5/Notebook-Software-and-How-To-Questions/board/td-p/5145007
Relevancy 30.53%

I have a very weird problem. My computer does not respond upon booting. It powers up but there is no response - the monitor stays in standby, the activity light on the CD-ROM stays ON, but in a multi-coloured manner and there's nothing I can do.

Maybe I'm wrong, but it looks as if power is coming to the M/Board from the PSU but not returning to the PSU to boot up the PC
 

https://forums.techguy.org/threads/is-it-the-psu-or-the-m-board.917233/
Relevancy 30.53%

Having problem with my key board. I can't seem to get the letter B or N to work. any suggestions? I changed key boards which didn't help an run all scans and did system restore. Thank you
 

https://forums.techguy.org/threads/key-board.880563/
Relevancy 30.53%

Hi guys! How can i identify the proper driver for my driver on my onboard agp vid accelerator... I recently formatted my computer and forgot to get the details of my driver.. now im having problems with my vid adpater... help please
 

A:On board AGP Vid RAM

Try PC Wizard - linked below on my sig. I don't know if it'll work on a driverless board. Also, you can look at your motherboard, locate the model number - look it up with google.com

its either Intel, Nvidia, ATI/AMD, VIA or SIS.
 

https://forums.techguy.org/threads/on-board-agp-vid-ram.685178/
Relevancy 30.53%

Hi, i need a new board my computer is currently not working and it freezes at the motherboard screen ive done tons of tests and diganosed it to be the motherboard as the problem. (ive also posted about this a few weeks ago)

I need to get a replacement board thats cheap under 100 bucks pref if you can help thanks.

Motherboard That needs Replacing - MCP61PM-HM (Has AMD Processor in it)
 

Relevancy 30.53%

I posted an earlier question about "PXE-E61: Media Test Failure, Check Cable"
I've been intouch with HP who told me it was probably the Hard Drive & the MB but a local PC store says that both are unlikely to be down, he tried to connect to the HD using an adapter but he couldn't detect it. So it's most likely the HD. Before I go buying a new HD I read about a PCB Board for sale on Ebay that fixes 50% of bad drives. I'm not sure of the likelyhood of this working - could it really work? and is it easy to change whatever I have to change?

http://cgi.ebay.com/SEAGATE-ST98082...ageNameZWD1VQQcmdZViewItem?_trksid=p1638.m118

Thanks.
 

Relevancy 30.53%

i just changed the board in my pc it is a asus cusl2 when it goes to start xp fires up fo r second and shuts down wondering how much ram is needed to run xp
 

A:new board

how much ram have you - I have seen it run on 128Mb - certainly a lot of machines with 256Mb where sold

have you made sure the cooling is correct and put any heatsink compound between the fan & CPU - could it be over temperature and shutting down ?

did you put the FAN on the correct way round - some CPUs had a small slot/ridge along oneside and you had to get the CPU Fan assembly the correct way around to nake good contact
 

https://forums.techguy.org/threads/new-board.787411/
Relevancy 30.53%

I'm planning on upgrading my processor later on to a core 2 duo e6750. The thing is what motherboard should I get because right now I'm on a dell E510 and the current motherboard in my computer doesn't support core 2 duo processors.
What's a good motherboard that will fit and is not too pricey?

Thanks.
 

A:What board?

You are likely better off building a whole new pc, rather than try to upgrade a dell. You may run into problems and find out that only other dell parts will fit your case.

If you think that you may want to upgrade in the future then it is best to build your own pc and stay away from propriatary parts. This way you won't have to worry about adding a new psu, mobo, etc.
 

https://forums.techguy.org/threads/what-board.652384/
Relevancy 30.53%

hello i have recently upgraded my ram on my dfi lanparty 790fx dark mobo it has an amd 9550 phenom quad core processor 2.2ghz the ram i just put in it is dominator 1066 dual channel 2 gig sticks and after doing the computer now reads processor as 1.6ghz and me nor my room mate can figure out what the problem is so if anyone can please help
 

A:Not too sure if this is the right board but...

Did you chk the multiplier in bios?
 

http://www.techspot.com/community/topics/not-too-sure-if-this-is-the-right-board-but.114564/
Relevancy 30.53%

What's up everybody??? Its good to be part of the Board!

Well...to start I have had this problem for over a week now and Im really losing hope...

Here are the facts:

1. I have NO sound from speakers, NO drag and Drop, UNABLE to paste from a copy...so I cant get all my important files OFF my computer to reformat...

2. IE doesn't open as well as Norton Antivirus, Or System Restore or System Installer, AVG wont launch due to installer problem...

3. Ran Regedit to erase some files...but cant run SR.INF or anything since I dont have service pack 2 disc on me right now...

4. Spybot scans for a while then reboots my computer...

5. I've used everything from Avira to Spybot, Hijack This to Spyware Terminator, AVG...etc...with Avira mainly doing the most good in identifying files...

So if there is ANYONE out there who can help...I would greatly appreciate it!

Thanks!!!
 

Relevancy 30.53%

Just got my hands on a Rampage III and have to say it looks twice as nice in person. However there is one issue, this being the number of usb headers on the mainboard. Whilst I had read somewhere that it was lacking in this area, I didn't expect to get a threefold decrease in them! This means I will have to ditch two usb's on the front panel and my card reader. I feel this is a bit unforgivable on a board so expensive. I thought I might return it as it's unused and get another but trouble is almost all the top boards don't have the three that I need with most only having two (including the big bang xpower).

Could anyone suggest a top board with 3?

A:Top X58 board...

GIGABYTE GA-X58A-UD9 LGA 1366 Intel X58 SATA 6Gb/s USB 3.0 XL ATX Intel Motherboard

This is a hard call, because I am an ASUS fan. But I think you will love this board.

http://www.sevenforums.com/hardware-devices/130334-top-x58-board.html
Relevancy 30.53%

my board is an ecs l7vmm3, can any one help me if i can put an 512mb ddr400 memory into it? im currently using 2x256mb ddr333. i just couldn't found info on their site regarding that matter. thanks
 

A:help ddr on my ecs board

Go here and do a scan: http://www.crucial.com/
Crucial says VMM2 supports DDR400, but they don't have VMM3 on the list, I don't know if it finds info for that board with the automatic scan...
 

https://forums.techguy.org/threads/help-ddr-on-my-ecs-board.775788/
Relevancy 30.53%

I have a compaq computer that stopped booting up about six months ago after i ran the restore disks. When I took it to a shop to be checked he found that by moving the RAM card to the empty slot worked and the computer did fine but he warned he didnt know if it would stay that way.
My daughter had to run the disks again and now its doing the same thing. I was told that the problem seemed to be in the mother board. My question is ... can i take the Ram card out of that computer and put it in my IBM compatible to increase its memory ... or will there be stuff from the other computer stored on that so that i cant use it in another computer?
HELP HELP
 

A:RAM Board

turtle523
RAM (Random Access Memory) only stores information temporarily
while the computer it is installed in is running. When a computer is properly shut down one of the functions of shutdown is to write information from the vcache to your hard drive.
So no usable information is stored on the RAM card.
Swapping RAM cards from one PC to another is not recommended since there are many different configurations of RAM and RAM cards and the card you pulled from the down unit may not be compatible with your other PC. Before you attempt such a swap you should do more investigation on what type of card was in the Compaq and what type is used in the other PC. Motherboards can be very fussy.
Dave
 

https://forums.techguy.org/threads/ram-board.55788/
Relevancy 30.53%

Looks like the 754 is an extinct species. But I still have a couple of working cpu for 754, and ddr400, and agp cards....so anybody know a source other than evil bay?
 

Relevancy 30.53%

I need help in locating drivers for a 648 MAX MSI motherboard, and I also need help in locating drivers for the network card also. Its ethernet

any help would be appreciated, I have XP-home edition installed on the computer
 

A:648 Max MSI board

I guess this is your board.
http://www.msicomputer.com/product/p_spec.asp?model=648_Max-L&class=mb

You have a sis chipset, so you look for sis, xp, drivers for whatever device you want.
http://www.msi.com.tw/program/support/driver/dvr/spt_dvr_list.php?part=1

I think the top driver here is for your lan.
http://www.msi.com.tw/program/support/driver/dvr/spt_dvr_list.php?part=1&kind=2&CHIP=2&COM=16

I think the top one here is agp.
http://www.msi.com.tw/program/support/driver/dvr/spt_dvr_list.php?part=1&kind=1&CHIP=1&COM=3

Or you can get drivers from sis.
http://www.sis.com/download/
Look that it's compatible with your motherboards chipset before you dl, it says your chipset on the link to your motherboard above.
 

http://www.techspot.com/community/topics/648-max-msi-board.29435/
Relevancy 30.53%

Good day everyone I am working a machine laptop Bug on Board that the ie stopped opening Owner was not using any anti-virus or anti-spyware software AFter working on machine I have found that ie won t open at all Spybot S amp D won t install AVG won t update and Ad-Aware won t update I installed firefox from external hard drive which works just fine I have done online scans HouseCall and scanned with AVG outdated and Ad-Aware outdated all of which found items and cleaned them up Still with same issue Went online and ran hi-jack this and removed several more items to no avail Installed webroot anti-spyware which says there is a trojan among other cookies but won t tell me where it is or clean it w o forking over I am not Bug on Board sure that I believe webroot The hijack this log follows Any assistance provided would be greatly appreciated Logfile of Trend Micro HijackThis v Scan saved at PM on Platform Windows XP SP WinNT MSIE Internet Explorer v Boot mode Safe mode with network support Running processes C WINDOWS System smss exe C WINDOWS system Bug on Board winlogon exe C WINDOWS system services exe C WINDOWS system lsass exe C Program Files Webroot WebrootSecurity Bug on Board WRConsumerService exe C WINDOWS system svchost exe C WINDOWS system svchost exe C Program Files Lavasoft Ad-Aware AAWService exe C Program Files Webroot WebrootSecurity SpySweeper exe C WINDOWS Explorer EXE C Program Files Lavasoft Ad-Aware AAWTray exe C WINDOWS system ctfmon exe C Program Files Trend Micro HijackThis HijackThis exe R - HKCU Software Microsoft Internet Explorer Main Search Bar http www toshiba com search R - HKCU Software Microsoft Internet Explorer Main Start Page http www toshibadirect com dpdstart R - HKCU Software Microsoft Internet Connection Wizard ShellNext http www toshibadirect com dpdstart O - BHO Ask com Toolbar BHO - D C F- A- -A AD- D - C Program Files Ask com GenericAskToolbar dll O - Toolbar Ask com Toolbar - D C F- A- -A AD- D - C Program Files Ask com GenericAskToolbar dll O - HKLM Run DLCCCATS quot rundll quot C WINDOWS System spool DRIVERS W X DLCCtime dll email protected O - HKLM Run dlccmon exe quot C Program Files Dell Photo AIO Printer dlccmon exe quot O - HKLM Run lxcrmon exe quot C Program Files Lexmark Series lxcrmon exe quot O - HKLM Run EzPrint quot C Program Files Lexmark Series ezprint exe quot O - HKLM Run FaxCenterServer quot C Program Files Lexmark Fax Solutions fm exe quot s O - HKLM Run LXCRCATS quot rundll quot C WINDOWS System spool DRIVERS W X LXCRtime dll email protected O - HKLM Run tsnpstd quot C WINDOWS tsnpstd exe quot O - HKLM Run snpstd quot C WINDOWS vsnpstd exe quot O - HKLM Run QuickTime Task quot C Program Files QuickTime QTTask exe quot -atboottime O - HKLM Run iTunesHelper quot C Program Files iTunes iTunesHelper exe quot O - HKLM Run AppleSyncNotifier quot C Program Files Common Files Apple Mobile Device Support bin AppleSyncNotifier exe quot O - HKLM Run KernelFaultCheck quot C WINDOWS system dumprep quot -k O - HKLM Run AVG TRAY quot C PROGRA AVG AVG avgtray exe quot O - HKLM Run Ad-Watch quot C Program Files Lavasoft Ad-Aware AAWTray exe quot O - HKLM Run SpySweeper quot C Program Files Webroot WebrootSecurity SpySweeperUI exe quot startintray O - HKCU Run ctfmon exe C WINDOWS system ctfmon exe O - HKCU Run MSMSGS quot C Program Files Messenger msmsgs exe quot background O - HKCU Run TOSCDSPD quot C Program Files TOSHIBA TOSCDSPD toscdspd exe quot O - Global Startup Adobe Reader Speed Launch lnk C Program Files Adobe Acrobat Reader reader sl exe O - Global Startup Kodak EasyShare software lnk C Program Files Kodak Kodak EasyShare software bin EasyShare exe O - Global Startup KODAK Software Updater lnk C Program Files Kodak KODAK Software Updater Program Kodak Software Updater exe O - Extra context menu item amp Google Search - res C Program Files Google GoogleToolbar dll cmsearch html O - Extra context menu item Backward Links - res C Program Files Google GoogleToolbar dll cmback... Read more

https://forums.techguy.org/threads/bug-on-board.812783/
Relevancy 30.53%

The XPS 13 laptop has an LED board in it. The board plugs into the motherboard, but it's not really clear to me what's for. The board is pictured here, www.ebay.com/.../262105473513

A:What is the LED board for?

It holds the system LEDs -- charging, power, etc.  They're on the front edge of the palmrest in this model.

http://en.community.dell.com/support-forums/laptop/f/3518/t/19993164
Relevancy 30.53%

Hi techspotters it has come time to modify my old rig I m planning to upgrade the cpu without changing my motherboard but there is a slight risk involved that the purchase I am going to make is with CPU board AM3+ AM3 faul So back to basics My current MB M A TD PRO AM3 board with AM3+ CPU USB - link Current CPU Phenom t oc running ghz Current RAM EVOleggera x running underclocked mhz the one to upgrade to AMD FX -- So this is a basic operation a cpu swap but few questions popped up on the research phase M A TD is a AM board which apparently after some searching supports some of the FX series cpus that are AM I have also found the corresponding BIOS that I need to flash myself to to make it work properly and be recognized by the MB link Q amp A FX is known to support mhz RAM speeds my existing RAM runs max at without overclock and is placed x which occupies all slots and might confuse the FX which supports dualchannel as usual Meaning I will need to leave my RAM running at mhz how big will the reduce be in the performance of the CPU- mhz vs When setting up the proceccor I will need to disable the Turbocore to make it stable on the older AM board which only supports cpu speeds up to ghz and the fx on turbo bumps to ghz After disabling turbo all cores are set to run at which by research is the most stable option on my existing MB Will FX bottleneck gtx or gtx and how bad it is going to be Upgrading hardware is always nice but am I making bold move by upgrading a year old cpu to almost as old one And if someone with more knowledge can state me that there is no performance gain to be maid I just might stick with my old as long as its still breathing and calculating Thanks in advance for replys And no changing an motherboard is not an option So fond of my old rig best regards m nbsp

http://www.techspot.com/community/topics/am3-board-with-am3-cpu.214400/
Relevancy 30.53%

Is a 4x, do I have to get a 4x card or will a 4x8x card work?
 

A:My board

if the card works in both 4x and 8x mode then a 4x slot should work fine. There may be a performance decrease running the card interface at half speed.
 

http://www.techspot.com/community/topics/my-board.44569/
Relevancy 30.53%

I bought a X 260 yesterday and now find when I type @ it actually types " and vice versa .Can some one help me to correct this

https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/Key-Board-on-X-260/td-p/3377902
Relevancy 30.53%

Is ti possible to use 5V power from molex to power up my on-board USB because i think there is something wrong with the power.I checked the cable connection couple of times and still the same message "Usb device has malfunction" when I connect device like my joystick to another USB it works fine.
 

A:On-board USB q?

You can try.. There is a good chance of smoke emerging though

You should start with making sure it's not a Windows/driver issue. Use a Linux CD and a USB mouse to test.

Connecting a stub usb cable and measuring the voltages coming out of the port is another thing you should do before going and breaking anything.
 

http://www.techspot.com/community/topics/on-board-usb-q.41033/
Relevancy 30.53%

Hi all.
First post here and it a question....my pc is over 4 yrs old running at 755mghz.
I know ****all about motherboards and cpu`s so do you think i should get a new board and bigger cpu or should i just get the bigger cpu???
Thanks in advance.
 

A:My Mo Board

Well there are a few things to consider while making this decision. First off, if you are fine with the performance of your current computer, then I don't see a need to update it and spend the money. But if you are looking for something a little faster or newer, then I would definately look into updating.
If you are interested in updating it, we will need more information on what type of motherboard you have, to see how fast of a processor it can take. But if it is 4 years old I am thinking you might need to get a new motherboard and CPU.
Post back with your system specs, or fill them out in your proflie
 

http://www.techspot.com/community/topics/my-mo-board.12459/
Relevancy 30.53%

I hope you kind folks can help me with a keylogger that I ve picked up a few days ago and haven t been able to get rid of I have a log here from hijackthis that I think points out the problem But I have no idea how to get rid of it Any help would be greatly appreciated Logfile of Trend Micro HijackThis v Scan saved at AM on Platform Unknown Windows WinNT MSIE Internet Explorer v Boot mode NormalRunning processes C Program Files x Norton Internet New need I and this help some to board Security Engine ccSvcHst exec Program Files x Hewlett-Packard TouchSmart Media Kernel CLML CLMLSvc exeC Program Files x Spybot - Search amp Destroy TeaTimer exeC Program Files x Hewlett-Packard HP Odometer New to this board and I need some help hpsysdrv exeC Program Files x Hewlett-Packard HP Remote Solution HP Remote Solution exeC Program Files x hp HP Software Update hpwuschd exeC Program Files x PictureMover Bin PictureMover exeC Program Files x Stardock Impulse Now ImpulseNow exeC Program Files x AVG AVG avgtray exeC Program Files x Lavasoft Ad-Aware AAWTray exeC Program Files x Trend Micro HijackThis HijackThis exeR - HKCU Software Microsoft Internet Explorer Main Default Page URL http g msn com HPDSK R - HKCU Software Microsoft Internet Explorer Main Search Page http go microsoft com fwlink LinkId R - HKCU Software Microsoft Internet Explorer Main Start Page http netscape aol com R - HKLM New to this board and I need some help Software Microsoft Internet Explorer Main Default Page URL http g msn com HPDSK R - HKLM Software Microsoft Internet Explorer Main Default Search URL http go microsoft com fwlink LinkId R - HKLM Software Microsoft Internet Explorer Main Search Page http go microsoft com fwlink LinkId R - HKLM Software Microsoft Internet Explorer Main Start Page http g msn com HPDSK R - HKLM Software Microsoft Internet Explorer Search SearchAssistant R - HKLM Software Microsoft Internet Explorer Search CustomizeSearch R - HKLM Software Microsoft Internet Explorer Main Local Page C Windows SysWOW blank htmR - HKCU Software Microsoft Internet Explorer Toolbar LinksFolderName O - BHO WormRadar com IESiteBlocker NavFilter - CA F - F E- B -A E- E E C C - C Program Files x AVG AVG avgssie dllO - BHO Spybot-S amp D IE Protection - - F - D - - D F - C Program Files x Spybot - Search amp Destroy SDHelper dllO - BHO no name - C C A-E - b - D - CECB - no file O - BHO Symantec NCO BHO - ADB E- AFF- - AA - DAC DFA - C Program Files x Norton Internet Security Engine coIEPlg dllO - BHO Symantec Intrusion Prevention - D EC - AAE- -AEEE-F F C - C Program Files x Norton Internet Security Engine IPSBHO DLLO - BHO Windows Live Sign-in Helper - D - C - ABF- ECC- C - C Program Files x Common Files Microsoft Shared Windows Live WindowsLiveLogin dllO - BHO Microsoft Live Search Toolbar Helper - d ce e -f a- - e- dc f c f - c Program Files x MSN Toolbar msneshellx dllO - Toolbar Microsoft Live Search Toolbar - E ED C- CB - d -B E -AB C C - c Program Files x MSN Toolbar msneshellx dllO - Toolbar Norton Toolbar - FEBEFE - B - - D -FFB D B CA - C Program Files x Norton Internet Security Engine coIEPlg dllO - HKLM Run hpsysdrv c program files x hewlett-packard HP odometer hpsysdrv exeO - HKLM Run HP Remote Solution ProgramFiles Hewlett-Packard HP Remote Solution HP Remote Solution exeO - HKLM Run HP Software Update c Program Files x HP HP Software Update HPWuSchd exeO - HKLM Run NortonOnlineBackupReminder quot C Program Files x Symantec Norton Online Backup Activation NobuActivation exe quot UNATTENDEDO - HKLM Run AVG TRAY C PROGRA AVG AVG avgtray exeO - HKLM Run TrojanScanner C Program Files x Trojan Remover Trjscan exe bootO - HKCU Run Steam quot C Program Files x Steam Steam exe quot -silentO - HKCU Run SpybotSD TeaTimer C Program Files x Spybot - Search amp Destroy TeaTimer exeO - HKCU Run tcactive C Program Files x The Cleaner tcap exeO - HKUS S- - - Run Sidebar ProgramFiles Windows Sidebar Sidebar exe autoRun User LOCAL SERVICE O - HKUS S- - - RunOnce mctadmi... Read more

A:New to this board and I need some help

Hello , And to the Bleeping Computer Malware Removal Forum. My name is Elise and I'll be glad to help you with your computer problems.I will be working on your malware issues, this may or may not solve other issues you may have with your machine.Please note that whatever repairs we make, are for fixing your computer problems only and by no means should be used on another computer.The cleaning process is not instant. Logs can take some time to research, so please be patient with me. I know that you need your computer working as quickly as possible, and I will work hard to help see that happen. Please reply using the Add/Reply button in the lower right hand corner of your screen. Do not start a new topic. The logs that you post should be pasted directly into the reply. Only attach them if requested or if they do not fit into the post.Unfortunately, if I do not hear back from you within 5 days, I will be forced to close your topic. If you still need help after I have closed your topic, send me or a moderator a personal message with the address of the thread or feel free to create a new one.You may want to keep the link to this topic in your favorites. Alternatively, you can click the button at the top bar of this topic and Track this Topic, where you can choose email notifications. The topics you are tracking are shown here.-----------------------------------------------------------If you have since resolved the original problem you were having, we would appreciate you letting us know. If not please perform the following steps below so we can have a look at the current condition of your machine. If you have not done so, include a clear description of the problems you're having, along with any steps you may have performed so far.If you have already posted a log, please do so again, as your situation may have changed.Use the 'Add Reply' and add the new log to this thread.We need to see some information about what is happening in your machine. Please perform the following scan:Please download OTL from one of the following mirrors:This is THE MirrorSave it to your desktop.Double click on the icon on your desktop.Click the "Scan All Users" checkbox.Push the button.Two reports will open, copy and paste them in a reply here:OTListIt.txt Will be openedExtra.txt Will be minimizedPlease download GMER from one of the following locations and save it to your desktop:Main MirrorThis version will download a randomly named file (Recommended)Zipped MirrorThis version will download a zip file you will need to extract first. If you use this mirror, please extract the zip file to your desktop.Disconnect from the Internet and close all running programs.Temporarily disable any real-time active protection so your security programs will not conflict with gmer's driver.Double-click on the randomly named GMER file (i.e. n7gmo46c.exe) and allow the gmer.sys driver to load if asked.Note: If you downloaded the zipped version, extract the file to its own folder such as C:\gmer and then double-click on gmer.exe.GMER will open to the Rootkit/Malware tab and perform an automatic quick scan when first run. (do not use the computer while the scan is in progress)If you receive a WARNING!!! about rootkit activity and are asked to fully scan your system...click NO.Now click the Scan button. If you see a rootkit warning window, click OK.When the scan is finished, click the Save... button to save the scan results to your Desktop. Save the file as gmer.log.Click the Copy button and paste the results into your next reply.Exit GMER and re-enable all active protection when done.-- If you encounter any problems, try running GMER in Safe Mode.-------------------------------------------------------------In the meantime please, do NOT install any new programs or update anything unless told to do so while we are fixing your problemIf you still need help, please include the following in your next replyA detailed description of your problemsA new OTL log (don't ... Read more

http://www.bleepingcomputer.com/forums/t/305174/new-to-this-board-and-i-need-some-help/
Relevancy 30.53%

when typing on my key board certain keys produce a diffrent symbol from the one on the key .is there a diffrent setting or somthing i can change to coorect this.
cheers
 

Relevancy 30.53%

hellow getsi live in pakistan. i hv HP envy 15 - 3207tx model B8M39PA. some keys of my laptop do not function. mechenics say it should be replaced. i did not find any key board in peshawar,  islam abad and even in lahore. its key board No is 668834-001. kindly help me how can i get key board. thanks 

http://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/key-board/td-p/5781751
Relevancy 30.53%

I am working on a new project and I have scoured the internet for AMD CPU's and boards for real cheap, and I mean CHEAP!

I think I have found the lowest price, but I wanted to see if you guys had anything, I am looking for the ABSOLUTE CHEAPEST AMD board and cpu you can find while keeping it over 1Ghz
 

Relevancy 30.53%

what ram would be best for the dfi nf4 sli board?

ocz has ram made just for dfi but i dont know
http://www.ocztechnology.com/produc...pc_5000_dual_channel_platinum_dfi_nf4_special

or should i go with something like this
http://www.ocztechnology.com/products/memory/ocz_el_ddr_pc_3200_dual_channel_platinum_rev_2
 

A:ram for dfi nf4 board

nice to see that a mobo manufacturer besides ABIT is putting out the extra money to put the good japanese caps on their boards. The specs for the board says it only supports DDR 400. So does that mean it won't support a Clawhammer with 1GHz FSB? weird. Anyway if you have a 1GHz FSB you would need the PC5000. i still don't get it. Sorry I'm an Intel guy so I'm not really into AMD, but no one was answering your post so.......... I thought all the 939 socket AMD's were 1GHz FSB? Someone correct me if I am wrong.
 

http://www.techspot.com/community/topics/ram-for-dfi-nf4-board.25045/
Relevancy 30.1%

I lnstalled window speech recognition on my laptop the keyboard massed up it just does not work right anybody knows what to do
 

https://forums.techguy.org/threads/key-board-massed-up.745540/
Relevancy 30.1%

If I put in 3 sticks of memory instead of 4 into a 939 board what will happen? Will I lose any speed? Would it be better to have just 2 and make 1GB or the 3 and have 1.5GB.
 

A:Question on 939 board.

Nothing bad happens, the memory will just work in single channel mode instead of dual channel. It's somewhat slower, but you can't really see the difference in everyday use. If I had to choose between 1.5 GB single channel and 1 GB dual, I'd pick the 1.5.
 

http://www.techspot.com/community/topics/question-on-939-board.95027/
Relevancy 30.1%

Looks like my old MSI board's IDE controllers are borked. So its new board time.

This (http://www.komplett.ie/k/ki.asp?sku=123081&view=detailed) looks OK, although I doubt it'll take my old RAM and CPU (DDR-1600 or DDR-2100, can't remember; and 1.7Ghz P4-B Celeron, 400 FSB).

Seems to be BeOS compatible as well, so no problems there.

Anybody here used one?
 

http://www.techspot.com/community/topics/this-a-decent-enough-board.16662/
Relevancy 30.1%

Hi all, am a beginner . just want to say hi to the community.
 

A:New techy on-board

I work in NIgeria, with an NGO that uses ICT for dvelopment(fantsuam founation)
 

http://www.techspot.com/community/topics/new-techy-on-board.93100/
Relevancy 30.1%

i asked hp tech support about the M.2 x22x110 slot on the mother board it's sdd labeled on the board, tech support says i cant use it with an m.2ssd drive board, i have to use a pciex16 graphics slot with an adator for m.2 ssd drive. they gave me a couple of part numbers ,but the drive is ssd sata 3. what kind of crapp is that all about.

A:M.2 M keyed says ssd on board

Hi @Ida213, I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post serial numbers and case details.If you are unfamiliar with how the Forum's private message capability works, this post has instructions.

http://h30434.www3.hp.com/t5/Desktop-Hardware-and-Upgrade-Questions/M-2-M-keyed-says-ssd-on-board/td-p/5599498
Relevancy 30.1%

my processor is 2400+ but no new board it is showing it 1800+
 

A:Mother board

Try clearing the cmos, your mobo manual will tell you how to do it.
 

http://www.techspot.com/community/topics/mother-board.89624/
Relevancy 30.1%

A couple of the capacitors are bulging and one has split at the top. The computer store told me to just get all my data off of it and wait for it to die. So far the only thing I've noticed wrong with it is that the USB ports continuously fail. But that's been happening for over a year and I've never looked at the board before. So I'm not really sure how fast it's going or what to expect. Is it safe to use it until it stops? Is it OK to leave it on all day or is it better to keep it off as much as possible? Can it start a fire? I feel like I need to start making arrangements for a proper funeral.
 

A:Using a blown board

noone will know when it will die....you're guess is as good as anyone else
 

https://forums.techguy.org/threads/using-a-blown-board.742415/
Relevancy 30.1%

Ive been having sluggish performance from a HP media center with an xp o/s installed; at first it wouldnt boot for ages and the hard drive was making a ticking noise so i changed the hard drive and did a fresh install. The HP booted ok but was still very sluggish so i swapped the PSU, RAM, and i reseated everything including the cpu but its still sluggish so that only leaves the motherboard or cpu.

I know that its unlikely to be the cpu so i was wondering if the m/board could cause this problem ?
I did a few tests on the m/board and cpu but they all passed so i am baffled.

Any ideas ?
 

https://forums.techguy.org/threads/could-this-be-a-m-board-problem.739527/
Relevancy 30.1%

DX48BT2 is the board i'm looking at getting and wonder if i should go with ddr2 or ddr3 Ram how much of a difference is it and is there other types of ram that would to a good job ..wanting it for ultimate gaming
 

A:Mother board and Ram

DDR3 comes with high clocks but also with price and high latency. So, high quality DDR2 would(COULD in some occasions) still outdo DDR3. To a point, latencies can determine the performance more than clocks.
 

https://forums.techguy.org/threads/mother-board-and-ram.738741/
Relevancy 30.1%

When i type its taking key strokes as other key strokes or adding in there own, for xample, when i hite 4 it types bt4 enter it gives me time and date. its seems as though its clustered if i hit t it types bt4 and if i hit b it types bt4, i believe there is something wrong with some settings could some one please help me in fixing this very annoying problem. This is on a dell. with a Zboard currently but the problem still accures with any other keyboard.
 

https://forums.techguy.org/threads/key-board-strokes.723991/