Windows Support Forum

BSOD New build W7 x64

Q: BSOD New build W7 x64

I was getting BSOD and freezeups slow downs on my Vista machine and did the easiest but most expensive fix - I upgraded by doing a new build Windows x Intel i - Lynnfield on a Gigabyte P A-UD P mobo GB x GB Corsair DDR OCZ Vertex GB SSD for the system drive - TB WD Green EAD and EAR - my x64 New build BSOD W7 bad on the EAR as I had to BSOD New build W7 x64 do a - jumper to get it aligned Asus ATI EAH GB videocard Corsair W PSU Software Loaded NIS Norton - I know most people think it's crap Various software Quickbooks Adobe PS CS Foxit WinRAR TeraCopy VLC player etc I ran Windows Update and updated all the drivers BSOD New build W7 x64 I could curiously the Gigabyte Motherboard DVD would not run under W including chipset Realtek IDE USB etc I DID NOT BSOD New build W7 x64 flash the BIOS - I figured it was the latest since it was so new I followed some quot tweak quot recommendations for the SSD and Windows Disabled defrag superfetch and prefetch drive indexing on the SSD some of these W does auto Reduced the Page File size moved some folders off the SSD like quot My Music quot etc I also tried to set up the drives as AHCI instead of IDE even though I won't do a RAID I have a Windows Home Server for backup and storage however I didn't do it initially and I made a regedit change and then changed the BIOS to the AHCI I couldn't get that to ever boot so I changed back to IDE The BSODs started randomly maybe after the AHCI but maybe before Various problems PFN LIST CORRUPT PAGE FAULT IN NON PAGED AREA REFERENCE BY POINTER SESSION INITIALIZATION FAILED I am running the Windows Memory Diagnostic Tool now it takes forever - actually I think IT HAS FROZEN too and I have the memtest disk to test afterwards If that is OK I read to go into the System logs in Event Viewer and use chkdsk f v Is there something else to do I'm not sure how to look at a minidump that's what I feel like doing to my PC right now Thanks in advance for your help I really don't want to do a re-install unless I know it's not a hardware issue OK Jumped the gun Windows x Ultimate new system new OS clean install i - ASUS ATI eaf GB P A-UD P Corsair W OCZ Vertex GB SSD WD Green TB - EADS and EARS jumpered - Upload attached

Relevancy 100%
Preferred Solution: BSOD New build W7 x64

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: BSOD New build W7 x64

Hello and welcome to TSF, boneman.

It looks like it may be a problem with your hard drive or memory. Bugchecks vary - 0x3B, 0x1A, 0x18 and 0x50. Some reference Ntfs.sys, all others reference win32k.sys.

Code:
Microsoft (R) Windows Debugger Version 6.11.0001.404 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\Users\Devin\Downloads\TSF\boneman\TSF_Vista_Support\020710-12339-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*c:\websymbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Machine Name:
Kernel base = 0xfffff800`02a1d000 PsLoadedModuleList = 0xfffff800`02c5ae50
Debug session time: Sun Feb 7 13:24:10.612 2010 (GMT-5)
System Uptime: 0 days 0:20:00.033
Loading Kernel Symbols
...............................................................
................................................................
.................................
Loading User Symbols
Loading unloaded module list
.............
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 50, {fffff8a0833e4b70, 1, fffff880012b7af5, 5}


Could not read faulting driver name
Probably caused by : Ntfs.sys ( Ntfs!NtfsDeleteScb+31 )

Followup: MachineOwner
---------

2: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

PAGE_FAULT_IN_NONPAGED_AREA (50)
Invalid system memory was referenced. This cannot be protected by try-except,
it must be protected by a Probe. Typically the address is just plain bad or it
is pointing at freed memory.
Arguments:
Arg1: fffff8a0833e4b70, memory referenced.
Arg2: 0000000000000001, value 0 = read operation, 1 = write operation.
Arg3: fffff880012b7af5, If non-zero, the instruction address which referenced the bad memory
address.
Arg4: 0000000000000005, (reserved)

Debugging Details:
------------------


Could not read faulting driver name

WRITE_ADDRESS: GetPointerFromAddress: unable to read from fffff80002cc50e0
fffff8a0833e4b70

FAULTING_IP:
Ntfs!NtfsDeleteScb+31
fffff880`012b7af5 488910 mov qword ptr [rax],rdx

MM_INTERNAL_CODE: 5

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

BUGCHECK_STR: 0x50

PROCESS_NAME: System

CURRENT_IRQL: 0

TRAP_FRAME: fffff8800317e810 -- (.trap 0xfffff8800317e810)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=fffff8a0833e4b70 rbx=0000000000000000 rcx=fffff8800317ea28
rdx=fffff8a0033e4b70 rsi=0000000000000000 rdi=0000000000000000
rip=fffff880012b7af5 rsp=fffff8800317e9a0 rbp=fffffa8007816180
r8=fffff8a0033e4c00 r9=0000000000000000 r10=fffff8a0033e4b40
r11=fffff8800317eb52 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0 nv up ei pl zr na po nc
Ntfs!NtfsDeleteScb+0x31:
fffff880`012b7af5 488910 mov qword ptr [rax],rdx ds:eb01:fffff8a0`833e4b70=????????????????
Resetting default scope

LAST_CONTROL_TRANSFER: from fffff80002b0cb91 to fffff80002a8ef00

STACK_TEXT:
fffff880`0317e6a8 fffff800`02b0cb91 : 00000000`00000050 fffff8a0`833e4b70 00000000`00000001 fffff880`0317e810 : nt!KeBugCheckEx
fffff880`0317e6b0 fffff800`02a8cfee : 00000000`00000001 fffff880`0317ea28 fffff8a0`0f6b8e00 fffff880`01100633 : nt! ?? ::FNODOBFM::`string'+0x40f5b
fffff880`0317e810 fffff880`012b7af5 : 00000000`00000000 fffff8a0`0f5677d0 fffff8a0`0f5677a0 fffff880`0122af6a : nt!KiPageFault+0x16e
fffff880`0317e9a0 fffff880`012b78d5 : 00000000`01010000 00000000`00000000 fffff800`02c32500 00000000`00000001 : Ntfs!NtfsDeleteScb+0x31
fffff880`0317e9e0 fffff880`0122acb4 : fffff8a0`033e4b70 fffff8a0`033e4c70 fffff800`02c32500 fffff880`0317eb52 : Ntfs!NtfsRemoveScb+0x61
fffff880`0317ea20 fffff880`012b52dc : fffff8a0`033e4b40 fffff800`02c325a0 fffff880`0317eb52 fffffa80`09392320 : Ntfs!NtfsPrepareFcbForRemoval+0x50
fffff880`0317ea50 fffff880`01233882 : fffffa80`09392320 fffffa80`09392320 fffff8a0`033e4b40 fffff880`0317ec00 : Ntfs!NtfsTeardownStructures+0xdc
fffff880`0317ead0 fffff880`012cc813 : fffffa80`07816180 fffff800`02c325a0 fffff8a0`6366744e 00000000`00000009 : Ntfs!NtfsDecrementCloseCounts+0xa2
fffff880`0317eb10 fffff880`012a638f : fffffa80`09392320 fffff8a0`033e4c70 fffff8a0`033e4b40 fffffa80`07816180 : Ntfs!NtfsCommonClose+0x353
fffff880`0317ebe0 fffff800`02a9c161 : 00000000`00000000 fffff880`01225200 fffff800`02c94101 000428bb`00000002 : Ntfs!NtfsFspClose+0x15f
fffff880`0317ecb0 fffff800`02d32166 : 74c084ff`ff530315 fffffa80`06738b60 00000000`00000080 fffffa80`0671f040 : nt!ExpWorkerThread+0x111
fffff880`0317ed40 fffff800`02a6d486 : fffff880`02f64180 fffffa80`06738b60 fffff880`02f6efc0 0000a0c4`8148c38b : nt!PspSystemThreadStartup+0x5a
fffff880`0317ed80 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KxStartSystemThread+0x16


STACK_COMMAND: kb

FOLLOWUP_IP:
Ntfs!NtfsDeleteScb+31
fffff880`012b7af5 488910 mov qword ptr [rax],rdx

SYMBOL_STACK_INDEX: 3

SYMBOL_NAME: Ntfs!NtfsDeleteScb+31

FOLLOWUP_NAME: MachineOwner

MODULE_NAME: Ntfs

IMAGE_NAME: Ntfs.sys

DEBUG_FLR_IMAGE_TIMESTAMP: 4a5bc14f

FAILURE_BUCKET_ID: X64_0x50_Ntfs!NtfsDeleteScb+31

BUCKET_ID: X64_0x50_Ntfs!NtfsDeleteScb+31

Followup: MachineOwner
---------

2: kd> r
rax=fffff6fb7dbed000 rbx=fffff6fb7dbf1410 rcx=0000000000000050
rdx=fffff8a0833e4b70 rsi=0000000000000000 rdi=fffff8a0833e4b70
rip=fffff80002a8ef00 rsp=fffff8800317e6a8 rbp=fffff8800317e700
r8=0000000000000001 r9=fffff8800317e810 r10=00000000000001f1
r11=fffff6fb7e2820c8 r12=fffff8800317e810 r13=fffff8a0833e4b70
r14=0000000000000000 r15=0000000000000001
iopl=0 nv up ei pl zr na po nc
cs=0010 ss=0018 ds=002b es=002b fs=0053 gs=002b efl=00000246
nt!KeBugCheckEx:
fffff800`02a8ef00 48894c2408 mov qword ptr [rsp+8],rcx ss:0018:fffff880`0317e6b0=0000000000000050
2: kd> k
Child-SP RetAddr Call Site
fffff880`0317e6a8 fffff800`02b0cb91 nt!KeBugCheckEx
fffff880`0317e6b0 fffff800`02a8cfee nt! ?? ::FNODOBFM::`string'+0x40f5b
fffff880`0317e810 fffff880`012b7af5 nt!KiPageFault+0x16e
fffff880`0317e9a0 fffff880`012b78d5 Ntfs!NtfsDeleteScb+0x31
fffff880`0317e9e0 fffff880`0122acb4 Ntfs!NtfsRemoveScb+0x61
fffff880`0317ea20 fffff880`012b52dc Ntfs!NtfsPrepareFcbForRemoval+0x50
fffff880`0317ea50 fffff880`01233882 Ntfs!NtfsTeardownStructures+0xdc
fffff880`0317ead0 fffff880`012cc813 Ntfs!NtfsDecrementCloseCounts+0xa2
fffff880`0317eb10 fffff880`012a638f Ntfs!NtfsCommonClose+0x353
fffff880`0317ebe0 fffff800`02a9c161 Ntfs!NtfsFspClose+0x15f
fffff880`0317ecb0 fffff800`02d32166 nt!ExpWorkerThread+0x111
fffff880`0317ed40 fffff800`02a6d486 nt!PspSystemThreadStartup+0x5a
fffff880`0317ed80 00000000`00000000 nt!KxStartSystemThread+0x16
2: kd> kvb
Child-SP RetAddr : Args to Child : Call Site
fffff880`0317e6a8 fffff800`02b0cb91 : 00000000`00000050 fffff8a0`833e4b70 00000000`00000001 fffff880`0317e810 : nt!KeBugCheckEx
fffff880`0317e6b0 fffff800`02a8cfee : 00000000`00000001 fffff880`0317ea28 fffff8a0`0f6b8e00 fffff880`01100633 : nt! ?? ::FNODOBFM::`string'+0x40f5b
fffff880`0317e810 fffff880`012b7af5 : 00000000`00000000 fffff8a0`0f5677d0 fffff8a0`0f5677a0 fffff880`0122af6a : nt!KiPageFault+0x16e (TrapFrame @ fffff880`0317e810)
fffff880`0317e9a0 fffff880`012b78d5 : 00000000`01010000 00000000`00000000 fffff800`02c32500 00000000`00000001 : Ntfs!NtfsDeleteScb+0x31
fffff880`0317e9e0 fffff880`0122acb4 : fffff8a0`033e4b70 fffff8a0`033e4c70 fffff800`02c32500 fffff880`0317eb52 : Ntfs!NtfsRemoveScb+0x61
fffff880`0317ea20 fffff880`012b52dc : fffff8a0`033e4b40 fffff800`02c325a0 fffff880`0317eb52 fffffa80`09392320 : Ntfs!NtfsPrepareFcbForRemoval+0x50
fffff880`0317ea50 fffff880`01233882 : fffffa80`09392320 fffffa80`09392320 fffff8a0`033e4b40 fffff880`0317ec00 : Ntfs!NtfsTeardownStructures+0xdc
fffff880`0317ead0 fffff880`012cc813 : fffffa80`07816180 fffff800`02c325a0 fffff8a0`6366744e 00000000`00000009 : Ntfs!NtfsDecrementCloseCounts+0xa2
fffff880`0317eb10 fffff880`012a638f : fffffa80`09392320 fffff8a0`033e4c70 fffff8a0`033e4b40 fffffa80`07816180 : Ntfs!NtfsCommonClose+0x353
fffff880`0317ebe0 fffff800`02a9c161 : 00000000`00000000 fffff880`01225200 fffff800`02c94101 000428bb`00000002 : Ntfs!NtfsFspClose+0x15f
fffff880`0317ecb0 fffff800`02d32166 : 74c084ff`ff530315 fffffa80`06738b60 00000000`00000080 fffffa80`0671f040 : nt!ExpWorkerThread+0x111
2: kd> kc
Call Site
nt!KeBugCheckEx
nt! ?? ::FNODOBFM::`string'
nt!KiPageFault
Ntfs!NtfsDeleteScb
Ntfs!NtfsRemoveScb
Ntfs!NtfsPrepareFcbForRemoval
Ntfs!NtfsTeardownStructures
Ntfs!NtfsDecrementCloseCounts
Ntfs!NtfsCommonClose
Ntfs!NtfsFspClose
nt!ExpWorkerThread
nt!PspSystemThreadStartup
nt!KxStartSystemThread
2: kd> lmntsm
start end module name
fffff880`04f5e000 fffff880`04f9c000 1394ohci 1394ohci.sys Mon Jul 13 20:07:12 2009 (4A5BCC30)
fffff880`00f89000 fffff880`00fe0000 ACPI ACPI.sys Mon Jul 13 19:19:34 2009 (4A5BC106)
fffff880`02cbe000 fffff880`02d48000 afd afd.sys Mon Jul 13 19:21:40 2009 (4A5BC184)
fffff880`04fb5000 fffff880`04fcb000 AgileVpn AgileVpn.sys Mon Jul 13 20:10:24 2009 (4A5BCCF0)
fffff880`010ee000 fffff880`010f9000 amdxata amdxata.sys Tue May 19 13:56:59 2009 (4A12F2EB)
fffff880`00ecd000 fffff880`00ed6000 atapi atapi.sys Mon Jul 13 19:19:47 2009 (4A5BC113)
fffff880`010c4000 fffff880`010ee000 ataport ataport.SYS Mon Jul 13 19:19:52 2009 (4A5BC118)
fffff880`03bdd000 fffff880`03bff000 AtiHdmi AtiHdmi.sys Wed Nov 18 18:25:33 2009 (4B04826D)
fffff880`03b14000 fffff880`03b40000 atikmpag atikmpag.sys Fri Dec 11 14:51:08 2009 (4B22A2AC)
fffff880`048dc000 fffff880`04f1f000 atipmdag atipmdag.sys Fri Dec 11 15:33:38 2009 (4B22ACA2)
fffff880`0199f000 fffff880`019a6000 Beep Beep.SYS Mon Jul 13 20:00:13 2009 (4A5BCA8D)
fffff880`098fd000 fffff880`099a4000 BHDrvx64 BHDrvx64.sys Wed Nov 25 00:09:37 2009 (4B0CBC11)
fffff880`03ac7000 fffff880`03ad8000 blbdrive blbdrive.sys Mon Jul 13 19:35:59 2009 (4A5BC4DF)
fffff880`03fbc000 fffff880`03fda000 bowser bowser.sys Mon Jul 13 19:23:50 2009 (4A5BC206)
fffff880`096e8000 fffff880`09784000 ccHPx64 ccHPx64.sys Fri Aug 21 19:01:40 2009 (4A8F2754)
fffff960`006c0000 fffff960`006e7000 cdd cdd.dll unavailable (00000000)
fffff880`0648f000 fffff880`064ac000 cdfs cdfs.sys Mon Jul 13 19:19:46 2009 (4A5BC112)
fffff880`0196c000 fffff880`01996000 cdrom cdrom.sys Mon Jul 13 19:19:54 2009 (4A5BC11A)
fffff880`00d05000 fffff880`00dc5000 CI CI.dll Mon Jul 13 21:32:13 2009 (4A5BE01D)
fffff880`01906000 fffff880`01936000 CLASSPNP CLASSPNP.SYS Mon Jul 13 19:19:58 2009 (4A5BC11E)
fffff880`00ca7000 fffff880`00d05000 CLFS CLFS.SYS Mon Jul 13 19:19:57 2009 (4A5BC11D)
fffff880`01000000 fffff880`01073000 cng cng.sys Mon Jul 13 19:49:40 2009 (4A5BC814)
fffff880`04fa5000 fffff880`04fb5000 CompositeBus CompositeBus.sys Mon Jul 13 20:00:33 2009 (4A5BCAA1)
fffff880`064ac000 fffff880`064ba000 crashdmp crashdmp.sys Mon Jul 13 20:01:01 2009 (4A5BCABD)
fffff880`03a26000 fffff880`03aa9000 csc csc.sys Mon Jul 13 19:24:26 2009 (4A5BC22A)
fffff880`03aa9000 fffff880`03ac7000 dfsc dfsc.sys Mon Jul 13 19:23:44 2009 (4A5BC200)
fffff880`02c97000 fffff880`02ca6000 discache discache.sys Mon Jul 13 19:37:18 2009 (4A5BC52E)
fffff880`018f0000 fffff880`01906000 disk disk.sys Mon Jul 13 19:19:57 2009 (4A5BC11D)
fffff880`03a00000 fffff880`03a22000 drmk drmk.sys Mon Jul 13 21:01:25 2009 (4A5BD8E5)
fffff880`064c6000 fffff880`064cf000 dump_atapi dump_atapi.sys Mon Jul 13 19:19:47 2009 (4A5BC113)
fffff880`064ba000 fffff880`064c6000 dump_dumpata dump_dumpata.sys Mon Jul 13 19:19:47 2009 (4A5BC113)
fffff880`064cf000 fffff880`064e2000 dump_dumpfve dump_dumpfve.sys Mon Jul 13 19:21:51 2009 (4A5BC18F)
fffff880`06483000 fffff880`0648f000 Dxapi Dxapi.sys Mon Jul 13 19:38:28 2009 (4A5BC574)
fffff880`03c21000 fffff880`03d15000 dxgkrnl dxgkrnl.sys Thu Oct 01 21:00:14 2009 (4AC5509E)
fffff880`03d15000 fffff880`03d5b000 dxgmms1 dxgmms1.sys Mon Jul 13 19:38:32 2009 (4A5BC578)
fffff880`09600000 fffff880`09676000 eeCtrl64 eeCtrl64.sys Mon Aug 17 19:05:31 2009 (4A89E23B)
fffff880`09fb6000 fffff880`09fd6000 ENG64 ENG64.SYS Wed Jan 06 17:14:39 2010 (4B450B4F)
fffff880`09fd6000 fffff880`09ffb000 EraserUtilDrvI9 EraserUtilDrvI9.sys Mon Aug 17 19:05:31 2009 (4A89E23B)
fffff880`09e09000 fffff880`09fb6000 EX64 EX64.SYS Wed Jan 06 17:23:25 2010 (4B450D5D)
fffff880`03e9c000 fffff880`03ed2000 fastfat fastfat.SYS Mon Jul 13 19:23:28 2009 (4A5BC1F0)
fffff880`01145000 fffff880`01159000 fileinfo fileinfo.sys Mon Jul 13 19:34:25 2009 (4A5BC481)
fffff880`010f9000 fffff880`01145000 fltmgr fltmgr.sys Mon Jul 13 19:19:59 2009 (4A5BC11F)
fffff880`013f0000 fffff880`013fa000 Fs_Rec Fs_Rec.sys Mon Jul 13 19:19:45 2009 (4A5BC111)
fffff880`018b6000 fffff880`018f0000 fvevol fvevol.sys Mon Jul 13 19:22:15 2009 (4A5BC1A7)
fffff880`0142b000 fffff880`01475000 fwpkclnt fwpkclnt.sys Mon Jul 13 19:21:08 2009 (4A5BC164)
fffff880`06a00000 fffff880`06a09000 gdrv gdrv.sys Thu Mar 12 23:22:29 2009 (49B9D175)
fffff800`02ffa000 fffff800`03043000 hal hal.dll Mon Jul 13 21:27:36 2009 (4A5BDF08)
fffff880`03d5b000 fffff880`03d7f000 HDAudBus HDAudBus.sys Mon Jul 13 20:06:13 2009 (4A5BCBF5)
fffff880`06427000 fffff880`06483000 HdAudio HdAudio.sys Mon Jul 13 20:06:59 2009 (4A5BCC23)
fffff880`0651d000 fffff880`06536000 HIDCLASS HIDCLASS.SYS Mon Jul 13 20:06:21 2009 (4A5BCBFD)
fffff880`06536000 fffff880`0653e080 HIDPARSE HIDPARSE.SYS Mon Jul 13 20:06:17 2009 (4A5BCBF9)
fffff880`0650f000 fffff880`0651d000 hidusb hidusb.sys Mon Jul 13 20:06:22 2009 (4A5BCBFE)
fffff880`03ef4000 fffff880`03fbc000 HTTP HTTP.sys Mon Jul 13 19:22:16 2009 (4A5BC1A8)
fffff880`015f6000 fffff880`015ff000 hwpolicy hwpolicy.sys Mon Jul 13 19:19:22 2009 (4A5BC0FA)
fffff880`09886000 fffff880`098fd000 IDSvia64 IDSvia64.sys Tue Oct 27 17:32:54 2009 (4AE76706)
fffff880`03afe000 fffff880`03b14000 intelppm intelppm.sys Mon Jul 13 19:19:25 2009 (4A5BC0FD)
fffff880`096ad000 fffff880`096d3000 Ironx64 Ironx64.SYS Wed Aug 26 20:41:31 2009 (4A95D63B)
fffff880`00dd5000 fffff880`00df5000 jraid jraid.sys Thu Oct 29 04:14:20 2009 (4AE94EDC)
fffff880`04890000 fffff880`0489f000 kbdclass kbdclass.sys Mon Jul 13 19:19:50 2009 (4A5BC116)
fffff880`0653f000 fffff880`0654d000 kbdhid kbdhid.sys Mon Jul 13 20:00:20 2009 (4A5BCA94)
fffff800`00bbd000 fffff800`00bc7000 kdcom kdcom.dll Mon Jul 13 21:31:07 2009 (4A5BDFDB)
fffff880`03b40000 fffff880`03b83000 ks ks.sys Mon Jul 13 20:00:31 2009 (4A5BCA9F)
fffff880`013c5000 fffff880`013df000 ksecdd ksecdd.sys Mon Jul 13 19:20:54 2009 (4A5BC156)
fffff880`01400000 fffff880`0142b000 ksecpkg ksecpkg.sys Mon Jul 13 19:50:34 2009 (4A5BC84A)
fffff880`048d5000 fffff880`048da200 ksthunk ksthunk.sys Mon Jul 13 20:00:19 2009 (4A5BCA93)
fffff880`065b9000 fffff880`065ce000 lltdio lltdio.sys Mon Jul 13 20:08:50 2009 (4A5BCC92)
fffff880`0655a000 fffff880`0657d000 luafv luafv.sys Mon Jul 13 19:26:13 2009 (4A5BC295)
fffff880`00c4f000 fffff880`00c93000 mcupdate_GenuineIntel mcupdate_GenuineIntel.dll Mon Jul 13 21:29:10 2009 (4A5BDF66)
fffff880`064e2000 fffff880`064f0000 monitor monitor.sys Mon Jul 13 19:38:52 2009 (4A5BC58C)
fffff880`0489f000 fffff880`048ae000 mouclass mouclass.sys Mon Jul 13 19:19:50 2009 (4A5BC116)
fffff880`0654d000 fffff880`0655a000 mouhid mouhid.sys Mon Jul 13 20:00:20 2009 (4A5BCA94)
fffff880`00c2f000 fffff880`00c49000 mountmgr mountmgr.sys Mon Jul 13 19:19:54 2009 (4A5BC11A)
fffff880`03fda000 fffff880`03ff2000 mpsdrv mpsdrv.sys Mon Jul 13 20:08:25 2009 (4A5BCC79)
fffff880`03e00000 fffff880`03e2c000 mrxsmb mrxsmb.sys Mon Jul 13 19:23:59 2009 (4A5BC20F)
fffff880`03e2c000 fffff880`03e79000 mrxsmb10 mrxsmb10.sys Mon Jul 13 19:24:08 2009 (4A5BC218)
fffff880`03e79000 fffff880`03e9c000 mrxsmb20 mrxsmb20.sys Mon Jul 13 19:24:05 2009 (4A5BC215)
fffff880`01809000 fffff880`01814000 Msfs Msfs.SYS Mon Jul 13 19:19:47 2009 (4A5BC113)
fffff880`00fe9000 fffff880`00ff3000 msisadrv msisadrv.sys Mon Jul 13 19:19:26 2009 (4A5BC0FE)
fffff880`01159000 fffff880`011b7000 msrpc msrpc.sys Mon Jul 13 19:21:32 2009 (4A5BC17C)
fffff880`02c8c000 fffff880`02c97000 mssmbios mssmbios.sys Mon Jul 13 19:31:10 2009 (4A5BC3BE)
fffff880`015e4000 fffff880`015f6000 mup mup.sys Mon Jul 13 19:23:45 2009 (4A5BC201)
fffff880`0148a000 fffff880`0157c000 ndis ndis.sys Mon Jul 13 19:21:40 2009 (4A5BC184)
fffff880`04fef000 fffff880`04ffb000 ndistapi ndistapi.sys Mon Jul 13 20:10:00 2009 (4A5BCCD8)
fffff880`04800000 fffff880`0482f000 ndiswan ndiswan.sys Mon Jul 13 20:10:11 2009 (4A5BCCE3)
fffff880`048c0000 fffff880`048d5000 NDProxy NDProxy.SYS Mon Jul 13 20:10:05 2009 (4A5BCCDD)
fffff880`02dbc000 fffff880`02dcb000 netbios netbios.sys Mon Jul 13 20:09:26 2009 (4A5BCCB6)
fffff880`02d48000 fffff880`02d8d000 netbt netbt.sys Mon Jul 13 19:21:28 2009 (4A5BC178)
fffff880`0157c000 fffff880`015dc000 NETIO NETIO.SYS Mon Jul 13 19:21:46 2009 (4A5BC18A)
fffff880`01814000 fffff880`01825000 Npfs Npfs.SYS Mon Jul 13 19:19:48 2009 (4A5BC114)
fffff880`02c80000 fffff880`02c8c000 nsiproxy nsiproxy.sys Mon Jul 13 19:21:02 2009 (4A5BC15E)
fffff800`02a1d000 fffff800`02ffa000 nt ntkrnlmp.exe Mon Jul 13 19:40:48 2009 (4A5BC600)
fffff880`01222000 fffff880`013c5000 Ntfs Ntfs.sys Mon Jul 13 19:20:47 2009 (4A5BC14F)
fffff880`01996000 fffff880`0199f000 Null Null.SYS Mon Jul 13 19:19:37 2009 (4A5BC109)
fffff880`02d96000 fffff880`02dbc000 pacer pacer.sys Mon Jul 13 20:09:41 2009 (4A5BCCC5)
fffff880`03c00000 fffff880`03c1d000 parport parport.sys Mon Jul 13 20:00:40 2009 (4A5BCAA8)
fffff880`00e40000 fffff880`00e55000 partmgr partmgr.sys Mon Jul 13 19:19:58 2009 (4A5BC11E)
fffff880`00e00000 fffff880`00e33000 pci pci.sys Mon Jul 13 19:19:51 2009 (4A5BC117)
fffff880`00ec6000 fffff880`00ecd000 pciide pciide.sys Mon Jul 13 19:19:49 2009 (4A5BC115)
fffff880`00dc5000 fffff880`00dd5000 PCIIDEX PCIIDEX.SYS Mon Jul 13 19:19:48 2009 (4A5BC114)
fffff880`013df000 fffff880`013f0000 pcw pcw.sys Mon Jul 13 19:19:27 2009 (4A5BC0FF)
fffff880`06a0f000 fffff880`06ab5000 peauth peauth.sys Mon Jul 13 21:01:19 2009 (4A5BD8DF)
fffff880`01850000 fffff880`0188d000 portcls portcls.sys Mon Jul 13 20:06:27 2009 (4A5BCC03)
fffff880`00c93000 fffff880`00ca7000 PSHED PSHED.dll Mon Jul 13 21:32:23 2009 (4A5BE027)
fffff880`04fcb000 fffff880`04fef000 rasl2tp rasl2tp.sys Mon Jul 13 20:10:11 2009 (4A5BCCE3)
fffff880`0482f000 fffff880`0484a000 raspppoe raspppoe.sys Mon Jul 13 20:10:17 2009 (4A5BCCE9)
fffff880`0484a000 fffff880`0486b000 raspptp raspptp.sys Mon Jul 13 20:10:18 2009 (4A5BCCEA)
fffff880`0486b000 fffff880`04885000 rassstp rassstp.sys Mon Jul 13 20:10:25 2009 (4A5BCCF1)
fffff880`02c2f000 fffff880`02c80000 rdbss rdbss.sys Mon Jul 13 19:24:09 2009 (4A5BC219)
fffff880`04885000 fffff880`04890000 rdpbus rdpbus.sys Mon Jul 13 20:17:46 2009 (4A5BCEAA)
fffff880`019e9000 fffff880`019f2000 RDPCDD RDPCDD.sys Mon Jul 13 20:16:34 2009 (4A5BCE62)
fffff880`019f2000 fffff880`019fb000 rdpencdd rdpencdd.sys Mon Jul 13 20:16:34 2009 (4A5BCE62)
fffff880`01800000 fffff880`01809000 rdprefmp rdprefmp.sys Mon Jul 13 20:16:35 2009 (4A5BCE63)
fffff880`011b7000 fffff880`011f1000 rdyboost rdyboost.sys Mon Jul 13 19:34:34 2009 (4A5BC48A)
fffff880`065ce000 fffff880`065e6000 rspndr rspndr.sys Mon Jul 13 20:08:50 2009 (4A5BCC92)
fffff880`04f1f000 fffff880`04f5e000 Rt64win7 Rt64win7.sys Thu Aug 20 12:05:06 2009 (4A8D7432)
fffff880`00c00000 fffff880`00c2f000 SCSIPORT SCSIPORT.SYS Mon Jul 13 20:01:04 2009 (4A5BCAC0)
fffff880`06ab5000 fffff880`06ac0000 secdrv secdrv.SYS Wed Sep 13 09:18:38 2006 (4508052E)
fffff880`03df3000 fffff880`03dff000 serenum serenum.sys Mon Jul 13 20:00:33 2009 (4A5BCAA1)
fffff880`02dcb000 fffff880`02de8000 serial serial.sys Mon Jul 13 20:00:40 2009 (4A5BCAA8)
fffff880`015dc000 fffff880`015e4000 spldr spldr.sys Mon May 11 12:56:27 2009 (4A0858BB)
fffff880`09481000 fffff880`094f2000 spsys spsys.sys Mon May 11 13:20:58 2009 (4A085E7A)
fffff880`09800000 fffff880`09886000 SRTSP64 SRTSP64.SYS Fri Aug 21 02:54:07 2009 (4A8E448F)
fffff880`09784000 fffff880`09798000 SRTSPX64 SRTSPX64.SYS Fri Aug 21 02:54:18 2009 (4A8E449A)
fffff880`06b68000 fffff880`06c00000 srv srv.sys Mon Jul 13 19:25:11 2009 (4A5BC257)
fffff880`06aff000 fffff880`06b68000 srv2 srv2.sys Mon Jul 13 19:25:02 2009 (4A5BC24E)
fffff880`06ac0000 fffff880`06aed000 srvnet srvnet.sys Mon Jul 13 19:24:58 2009 (4A5BC24A)
fffff880`03c1d000 fffff880`03c1e480 swenum swenum.sys Mon Jul 13 20:00:18 2009 (4A5BCA92)
fffff880`094f2000 fffff880`09560000 SYMDS64 SYMDS64.SYS Mon Aug 17 19:35:30 2009 (4A89E942)
fffff880`09560000 fffff880`0959a000 SYMEFA64 SYMEFA64.SYS Thu Aug 27 22:27:03 2009 (4A974077)
fffff880`09677000 fffff880`096ad000 SYMEVENT64x86 SYMEVENT64x86.SYS Thu Aug 13 18:28:21 2009 (4A849385)
fffff880`09400000 fffff880`09476000 SYMTDIV SYMTDIV.SYS Sat Aug 15 01:17:37 2009 (4A8644F1)
fffff880`01601000 fffff880`017fe000 tcpip tcpip.sys Mon Jul 13 19:25:34 2009 (4A5BC26E)
fffff880`06aed000 fffff880`06aff000 tcpipreg tcpipreg.sys Mon Jul 13 20:09:49 2009 (4A5BCCCD)
fffff880`01843000 fffff880`01850000 TDI TDI.SYS Mon Jul 13 19:21:18 2009 (4A5BC16E)
fffff880`01825000 fffff880`01843000 tdx tdx.sys Mon Jul 13 19:21:15 2009 (4A5BC16B)
fffff880`02c1b000 fffff880`02c2f000 termdd termdd.sys Mon Jul 13 20:16:36 2009 (4A5BCE64)
fffff960`00410000 fffff960`0041a000 TSDDD TSDDD.dll unavailable (00000000)
fffff880`03ad8000 fffff880`03afe000 tunnel tunnel.sys Mon Jul 13 20:09:37 2009 (4A5BCCC1)
fffff880`048ae000 fffff880`048c0000 umbus umbus.sys Mon Jul 13 20:06:56 2009 (4A5BCC20)
fffff880`064f0000 fffff880`0650d000 usbccgp usbccgp.sys Mon Jul 13 20:06:45 2009 (4A5BCC15)
fffff880`0650d000 fffff880`0650ef00 USBD USBD.SYS Mon Jul 13 20:06:23 2009 (4A5BCBFF)
fffff880`03de2000 fffff880`03df3000 usbehci usbehci.sys Mon Jul 13 20:06:30 2009 (4A5BCC06)
fffff880`03b83000 fffff880`03bdd000 usbhub usbhub.sys Mon Jul 13 20:07:09 2009 (4A5BCC2D)
fffff880`03d8c000 fffff880`03de2000 USBPORT USBPORT.SYS Mon Jul 13 20:06:31 2009 (4A5BCC07)
fffff880`03d7f000 fffff880`03d8c000 usbuhci usbuhci.sys Mon Jul 13 20:06:27 2009 (4A5BCC03)
fffff880`00e33000 fffff880`00e40000 vdrvroot vdrvroot.sys Mon Jul 13 20:01:31 2009 (4A5BCADB)
fffff880`019a6000 fffff880`019b4000 vga vga.sys Mon Jul 13 19:38:47 2009 (4A5BC587)
fffff880`019b4000 fffff880`019d9000 VIDEOPRT VIDEOPRT.SYS Mon Jul 13 19:38:51 2009 (4A5BC58B)
fffff880`01475000 fffff880`01485000 vmstorfl vmstorfl.sys Mon Jul 13 19:42:54 2009 (4A5BC67E)
fffff880`00e55000 fffff880`00e6a000 volmgr volmgr.sys Mon Jul 13 19:19:57 2009 (4A5BC11D)
fffff880`00e6a000 fffff880`00ec6000 volmgrx volmgrx.sys Mon Jul 13 19:20:33 2009 (4A5BC141)
fffff880`01073000 fffff880`010bf000 volsnap volsnap.sys Mon Jul 13 19:20:08 2009 (4A5BC128)
fffff880`02c00000 fffff880`02c1b000 wanarp wanarp.sys Mon Jul 13 20:10:21 2009 (4A5BCCED)
fffff880`019d9000 fffff880`019e9000 watchdog watchdog.sys Mon Jul 13 19:37:35 2009 (4A5BC53F)
fffff880`00ed6000 fffff880`00f7a000 Wdf01000 Wdf01000.sys Mon Jul 13 19:22:07 2009 (4A5BC19F)
fffff880`00f7a000 fffff880`00f89000 WDFLDR WDFLDR.SYS Mon Jul 13 19:19:54 2009 (4A5BC11A)
fffff880`02d8d000 fffff880`02d96000 wfplwf wfplwf.sys Mon Jul 13 20:09:26 2009 (4A5BCCB6)
fffff960`00060000 fffff960`0036f000 win32k win32k.sys unavailable (00000000)
fffff880`04f9c000 fffff880`04fa5000 wmiacpi wmiacpi.sys Mon Jul 13 19:31:02 2009 (4A5BC3B6)
fffff880`00fe0000 fffff880`00fe9000 WMILIB WMILIB.SYS Mon Jul 13 19:19:51 2009 (4A5BC117)
fffff880`0657d000 fffff880`0659e000 WudfPf WudfPf.sys Mon Jul 13 20:05:37 2009 (4A5BCBD1)

Unloaded modules:
fffff880`098fd000 fffff880`0999f000 BHDrvx64.sys
Timestamp: unavailable (00000000)
Checksum: 00000000
fffff880`09600000 fffff880`09677000 IDSVia64.sys
Timestamp: unavailable (00000000)
Checksum: 00000000
fffff880`09fd8000 fffff880`09ff8000 ENG64.SYS
Timestamp: unavailable (00000000)
Checksum: 00000000
fffff880`09e2b000 fffff880`09fd8000 EX64.SYS
Timestamp: unavailable (00000000)
Checksum: 00000000
fffff880`09800000 fffff880`09886000 SRTSP64.SYS
Timestamp: unavailable (00000000)
Checksum: 00000000
fffff880`09fe0000 fffff880`0a000000 ENG64.SYS
Timestamp: unavailable (00000000)
Checksum: 00000000
fffff880`09e33000 fffff880`09fe0000 EX64.SYS
Timestamp: unavailable (00000000)
Checksum: 00000000
fffff880`01936000 fffff880`01967000 WUDFRd.sys
Timestamp: unavailable (00000000)
Checksum: 00000000
fffff880`0659e000 fffff880`065b9000 USBSTOR.SYS
Timestamp: unavailable (00000000)
Checksum: 00000000
fffff880`01936000 fffff880`01944000 crashdmp.sys
Timestamp: unavailable (00000000)
Checksum: 00000000
fffff880`01944000 fffff880`01950000 dump_ataport
Timestamp: unavailable (00000000)
Checksum: 00000000
fffff880`01950000 fffff880`01959000 dump_atapi.s
Timestamp: unavailable (00000000)
Checksum: 00000000
fffff880`01959000 fffff880`0196c000 dump_dumpfve
Timestamp: unavailable (00000000)
Checksum: 00000000
Because you already have MemTest86+, go ahead and run that test. If that doesn't report any errors, open an elevated command prompt (Start>type cmd>right-click>Run as administrator) and enter the command chkdsk /r /f.

Let us know how the test turns out. Good luck.

http://www.techsupportforum.com/forums/f299/bsod-new-build-w7-x64-460349.html
Relevancy 43%

I had been getting BSODs on an older custom PC so I decided it was time to upgrade and I recently put together a new system and have been having irregular BSOD errors since day I initially thought that it was the RAM because that was the only other part besides the hard drives that was recycled from my old build but I ran memtest for passes and then passes Different System Types BSOD Build, of Many Errors. New After BSOD and received no errors A problem I have also been having is that my RAM will not boot to windows at it's rated speed of mhz and with XMP enabled I finally got it to boot to when I increased the timings by or on each but that didn't seem to BSOD After New System Build, Many Different Types of BSOD Errors. solve anything I should've clarified that I get BSOD when the RAM is set to auto or when it's set to manual or anything else in between I am also able to run Prime for about hours along with browsing and gaming with no issues until I BSOD eventually I've attached the many dump files I've accumulated since I started logging them The only consistent thing that keeps popping up is ntoskrnl exe which I doubt to be the actual cause Hopefully someone can help

A:BSOD After New System Build, Many Different Types of BSOD Errors.

An update of sorts. It seems my adobe flash player is crashing a lot after extended periods of viewing online videos and streaming. Also in the latest crash dump file in my zip folder my computer would hang and freeze and barely respond and when I looked at the resources panel my cpu was at a constant 100% before it crashed.

Edit: Here's another dump file from another BSOD.

http://www.sevenforums.com/bsod-help-support/313048-bsod-after-new-system-build-many-different-types-bsod-errors.html
Relevancy 39.99%

After a clean install of Window 7 64bit Pro full retail and the following new hardware:
CPU. i5-2500K 3.30Hz 6MB Cache
MB. ASUS P8P67 Pro B3 Revision
MEM. 8GB DDR3
Graphics ATI HD5570
PSU Corsair 800w
Disks:
WD Caviar Green 500gb
Maxtor 300gb
WD External 120gb.

I have had a few problems with a WPD driver that is now sorted but ever since installation there have been sudden PC shutdowns, program has stopped working messages, and general minor lockups. I hope the attached information will allow someone with the right knowledge to find what the problem maybe. I noted in the health report that there was no AV found, I have Spyware Doctor with Anti Virus and use PC Tools firewall plus.

I hope I have carried out the instructions correctly, if not I am sure you will let me know!

Happy Hunting

A:New build PC, still got a few BSoD's

  
Quote: Originally Posted by Trapper


After a clean install of Window 7 64bit Pro full retail and the following new hardware:
CPU. i5-2500K 3.30Hz 6MB Cache
MB. ASUS P8P67 Pro B3 Revision
MEM. 8GB DDR3
Graphics ATI HD5570
PSU Corsair 800w
Disks:
WD Caviar Green 500gb
Maxtor 300gb
WD External 120gb.

I have had a few problems with a WPD driver that is now sorted but ever since installation there have been sudden PC shutdowns, program has stopped working messages, and general minor lockups. I hope the attached information will allow someone with the right knowledge to find what the problem maybe. I noted in the health report that there was no AV found, I have Spyware Doctor with Anti Virus and use PC Tools firewall plus.

I hope I have carried out the instructions correctly, if not I am sure you will let me know!

Happy Hunting


You need to update a few older drivers:

http://www.sevenforums.com/bsod-help-support/206476-new-build-pc-still-got-few-bsods.html
Relevancy 39.99%

Hi all I recnetly gt week built a new PC and am having some issues I have had BSOD's in the last hours New BSOD's Build They all occured during moderate to heavy usage of the computer and all while either video playing hulu New Build BSOD's or gaming wow was going on or both All of the crashes had the code d which i understand is usually a driver issue I have tried to get the most recent drivers for all of my hardware I did run the MDSched util and got no New Build BSOD's errors I have tried to run memtest and New Build BSOD's had some issues there The single-cpu test gets no errors but stops and boots at percent of test which i understand is fairly common with multiple cpus the multiple cpu test looks like it just freezes but thats experimental so i didn't have high hopes for it I have the dumps and was very much hoping someone could just parse them and tell me the name of the driver file thats malfunctioniong if it is one and i can then either find a replacement driver or at worst a replacement part I am not currently OC'ing at all and the cooling should not be a problem at all My hardware is as follows MSI N GT-MD G Gb DDR video card Newegg com - MSI N GT-MD G GeForce GT GB -bit GDDR PCI Express x HDCP Ready SLI Supported Video Card - Desktop Graphics Video Cards- - gb x gb crucial Ram Newegg com - Crucial GB x GB -Pin DDR SDRAM DDR PC Dual Channel Kit Desktop Memory Model CT KIT BA - Desktop Memory- - Intel Quad Core Ghz not OC'd at all currently Newegg com - Intel Core Quad Q Yorkfield GHz MB L Cache LGA W Quad-Core Processor - Processors - Desktops- - i did replace the heatsink fan with a rosewill unit Newegg com - Rosewill RCX-Z -AL mm Sleeve CPU Cooler - CPU Fans amp Heatsinks- - Hard drives an older sata that i pulled from the last pc and a new gb WD Caviar drive Newegg com - Western Digital Caviar Green WD AADS GB MB Cache SATA Gb s quot Hard Drive -Bare Drive- - The mainboard is an Asus Newegg com - ASUS P P TD Pro LGA Intel P ATX Intel Motherboard - Intel Motherboards- - i also have an old wifi card a linksys wmp g and an old tv tuner card in the case although i haven't installed any drivers for the tuner yet and it is totally unrecognized by the system i scavenged the tuner as well and have no idea where to find vista or drivers for it lol i also have a dvd burner and dvd player scavenged from the old case without any drivers whatsoever seems to like em just fine shouldnt matter but the ps is Newegg com - Rosewill Stallion Series RD - SB W ATX V v Power Supply - Power Supplies- - and the case is Newegg com - Rosewill RCX-Z -AL mm Sleeve CPU Cooler - CPU Fans amp Heatsinks- - attached are the dumps all in one zip so if anyone can help it would be much appreciated

A:New Build BSOD's

Great problem write-up








  
Quote: Originally Posted by formerlystoner


All of the crashes had the code d7, which i understand is usually a driver issue. I have tried to get the most recent drivers for all of my hardware.


Actually, they're a mix of D1, A, and stop 0x50s. Some video, some low-level memory handling, some completely obliterated to the point where it's hard to tell what was going on, let alone where.








  
Quote: Originally Posted by martin10522


... the multiple cpu test looks like it just freezes, but thats experimental so i didn't have high hopes for it.


Hang on to that thought....








  
Quote: Originally Posted by martin10522


I have the dumps and was very much hoping someone could just parse them and tell me the name of the driver file thats malfunctioniong, if it is one, and i can then either find a replacement driver or at worst a replacement part.


There's no (obvious) involvement from 3rd-party code. It's all Microsoft stuff, mostly in the kernel.








  
Quote: Originally Posted by martin10522


I am not currently OC'ing at all, and the cooling should not be a problem at all.
...
attached are the dumps, all in one zip, so if anyone can help it would be much appreciated.


I think your processor may be screwy. There is evidence in one of the dumps that the cores may be experiencing problems while attempting to communicate with each other. That doesn't prove that the processor itself is at fault (a minidump hardly "proves" anything). However, in your situation it would be enough to make me think the processor may be the best place to start being suspicious.

http://www.sevenforums.com/bsod-help-support/29868-new-build-bsods.html
Relevancy 39.99%

Hey guys, i just built my first pc about 1 week ago and i've already got a problem. Im running windows 8 and i had a bsod on startup but i thought it was nothing anyways within a week i've had it 4 times. below are the details.
OS - ? windows 8
? x86 (32-bit) or x64 ? 64 bit
? What was original installed OS on system? Custom built pc
? Is the OS an OEM version (came pre-installed on system) or full retail version (YOU purchased it from retailer)? purchased from retailer.
? Age of system (hardware): 1 week
? Age of OS installation - have you re-installed the OS? 1 week, have not yet reinstalled.

? CPU: amd fx 6300
? Video Card: sapphire 2gb radeon hd 7850
? MotherBoard :Gigabyte GA-970A-DS3 Socket AM3+ 7.1 Channel Audio ATX Motherboard
? Power Supply - 650w xfx
From what i remember the errors i have seen are
bad_pool_caller
irql not less or equal

A:new build bsod

Recommendations:Crashes point to avast! as the culprit. We have seen a lot of problems with avast! and Windows 8. I would advise removing avast! and re-enabling Windows Defender.avast! Uninstall Utility | Download aswClear for avast! Removal
To re-enable Defender:
Click in the lower left corner of the desktop to open the Start Page.

Type Action Center and click Settings to open Action Center.

Click on Security to expand the Security area.

Wait a minute to let the Security area refresh to show Security vulnerabilities.

You should see a message to Turn on now for Windows Defender. Click the Turn on now button.

Make sure Windows Firewall is also turned on.

In Defender, click the Update tab, and then click the Update button.

Outdated and Problematic Drivers:You should update/replace/remove the following drivers. Any drivers that are known to cause BSODs, please remove the software or remove the drivers and then remove the device; steps to do so are given after the list of outdated drivers.
Rt630x64.sys Wed Oct 19 06:12:55 2011 (4E9EBEC7)
Realtek PCI/PCIe Adapters
http://www.carrona.org/drivers/driver.php?id=Rt630x64.sys

dtsoftbus01.sys Fri Jan 13 06:45:46 2012 (4F10358A)
Daemon Tools driver [br] Possible BSOD issues in Win7
http://www.carrona.org/drivers/driver.php?id=dtsoftbus01.sys

AODDriver2.sys Thu Apr 5 03:23:37 2012 (4F7D6499)
AMD Overdrive; also in EasyTune6 for Gigabyte motherboard [br] Known BSOD issues in Win7
http://www.carrona.org/drivers/driver.php?id=AODDriver2.sys

To update drivers, make sure to download the drivers from the manufacturer and not using 3rd party programs. Your drivers should be found from your motherboard support site (ASUS, Gigabyte, MSI, etc.) or your vendor support site (Dell, HP, Toshiba, Sony, etc.) first. If you have devices you bought yourself, the drivers for those devices need to be downloaded from the manufacturer support site for those devices. If you need help, let us know.

To remove drivers, do so by uninstalling the device or software associated with the driver. Devices can be uninstalled through device manager, and then the device itself should be physically removed from the system if possible.Uninstall or change a program

Open Device Manager
3rd Party Drivers: The following is for information purposes only. My recommendations were given above. The drivers that follow belong to software or devices that were not developed by Microsoft. Any drivers in red should be updated/replaced/removed. You can find links to the driver information and where to update the drivers in the section after the code box:

Code:
**************************Fri Feb 22 07:32:09.064 2013 (UTC - 7:00)**************************
Rt630x64.sys Wed Oct 19 06:12:55 2011 (4E9EBEC7)
dtsoftbus01.sys Fri Jan 13 06:45:46 2012 (4F10358A)
AODDriver2.sys Thu Apr 5 03:23:37 2012 (4F7D6499)
aswrdr2.sys Mon Oct 8 02:23:43 2012 (50728D8F)
aswFsBlk.SYS Tue Oct 30 16:43:04 2012 (509057F8)
aswMonFlt.sys Tue Oct 30 16:43:09 2012 (509057FD)
aswSP.SYS Tue Oct 30 16:44:06 2012 (50905836)
aswSnx.SYS Tue Oct 30 16:44:08 2012 (50905838)
aswnet.sys Sun Nov 4 03:12:57 2012 (50963FA9)
SCDEmu.SYS Sun Dec 9 01:46:41 2012 (50C44FF1)
AtihdW86.sys Wed Dec 12 10:20:30 2012 (50C8BCDE)
atikmpag.sys Wed Dec 19 12:32:55 2012 (50D21667)
atikmdag.sys Wed Dec 19 13:38:55 2012 (50D225DF)

http://www.carrona.org/drivers/driver.php?id=Rt630x64.sys
http://www.carrona.org/drivers/driver.php?id=dtsoftbus01.sys
http://www.carrona.org/drivers/driver.php?id=AODDriver2.sys
aswrdr2.sys - this driver hasn't been added to the DRT as of this run. Please search Google/Bing for the driver if additional information is needed.
http://www.carrona.org/drivers/dr... Read more

http://www.techsupportforum.com/forums/f299/new-build-bsod-687641.html
Relevancy 39.99%

BSOD on a new system

Win7
Win Home Prem. 64bit
Win7 original OS
OEM version disk, installed by me

system and OS about 1 mo. old

ASUS M4A89TD PRO
AMD Phenom II X6 1090T 3.20GHz
ASUS EAH6870 DC/2DI2S/1GD5 Radeon HD 6870
G.SKILL Ripjaws 16GB 240-Pin DDR3 SDRAM

please let me know if further hardware info is required.

A:BSOD new build

A lot of the BSODs are blaming the DirectX driver. I've also seen problems before with the ASUS branded video cards. It installs some drivers that cause conflicts.

Fist download the latest ATI drivers - ATI Radeon
Next, go into device manager and uninstall your video card. Make sure to choose the option to remove the drivers if one is available. After it's removed reboot the computer and install the latest drivers you just downloaded.

Also remove any ASUS software that you have installed that you don't use.

If the crashes continue then enable driver verifier - Driver Verifier - Enable and Disable

Please run these tests and report back the results
1. Memtest86 - Run for 7-8 passes - RAM - Test with Memtest86+
2. Prime95 - Run all three tests for 3-4 hours each or until fail - http://www.sevenforums.com/tutorials...t-prime95.html
3. Hard drive scan usings SeaTools - SeaTools for Windows | Seagate - Both long and short tests
BSOD BUGCHECK SUMMARY

Code:

Built by: 7601.17592.amd64fre.win7sp1_gdr.110408-1631
Debug session time: Thu May 26 21:18:20.297 2011 (UTC - 4:00)
System Uptime: 2 days 4:17:33.030
Probably caused by : ntkrnlmp.exe ( nt!KeSetEvent+139 )
BUGCHECK_STR: 0x3B
PROCESS_NAME: plugin-contain
FAILURE_BUCKET_ID: X64_0x3B_nt!KeSetEvent+139
BiosReleaseDate = 11/17/2010
SystemManufacturer = System manufacturer
SystemProductName = System Product Name
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7601.17592.amd64fre.win7sp1_gdr.110408-1631
Debug session time: Thu May 19 13:05:58.688 2011 (UTC - 4:00)
System Uptime: 3 days 20:48:17.420
Probably caused by : dxgmms1.sys ( dxgmms1!VIDMM_SEGMENT::MarkResourcesForEviction+204 )
PROCESS_NAME: System
BUGCHECK_STR: 0x7E
FAILURE_BUCKET_ID: X64_0x7E_dxgmms1!VIDMM_SEGMENT::MarkResourcesForEviction+204
BiosReleaseDate = 11/17/2010
SystemManufacturer = System manufacturer
SystemProductName = System Product Name
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7601.17514.amd64fre.win7sp1_rtm.101119-1850
Debug session time: Thu May 12 20:14:57.687 2011 (UTC - 4:00)
System Uptime: 4 days 9:06:50.420
Probably caused by : win32k.sys ( win32k!HmgShareLockCheck+73 )
BUGCHECK_STR: 0x3B
PROCESS_NAME: Photoshop.exe
FAILURE_BUCKET_ID: X64_0x3B_win32k!HmgShareLockCheck+73
BiosReleaseDate = 11/17/2010
SystemManufacturer = System manufacturer
SystemProductName = System Product Name
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7601.17514.amd64fre.win7sp1_rtm.101119-1850
Debug session time: Sat May 7 18:07:29.476 2011 (UTC - 4:00)
System Uptime: 0 days 0:00:16.584
Probably caused by : ntkrnlmp.exe ( nt!IovUtilMarkDeviceObject+9 )
PROCESS_NAME: System
BUGCHECK_STR: 0x7E
FAILURE_BUCKET_ID: X64_0x7E_VRF_nt!IovUtilMarkDeviceObject+9
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7601.17514.amd64fre.win7sp1_rtm.101119-1850
Debug session time: Sat May 7 10:18:38.609 2011 (UTC - 4:00)
System Uptime: 1 days 10:43:46.718
Probably caused by : dxgmms1.sys ( dxgmms1!VIDMM_SEGMENT::MarkResourcesForEviction+204 )
PROCESS_NAME: csrss.exe
BUGCHECK_STR: 0x7E
FAILURE_BUCKET_ID: X64_0x7E_dxgmms1!VIDMM_SEGMENT::MarkResourcesForEviction+204
BiosReleaseDate = 11/17/2010
SystemManufacturer = System manufacturer
SystemProductName = System Product Name
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7601.17514.amd64fre.win7sp1_rtm.101119-1850
Debug session time: Thu May 5 23:33:38.051 2011 (UTC - 4:00)
System Uptime: 1 days 21:34:56.542
Probably caused by : dxgmms1.sys ( dxgmms1!VIDMM_SEGMENT::MarkResourcesForEviction+204 )
PROCESS_NAME: System
BUGCHECK_STR: 0x7E
FAILURE_BUCKET_ID: X64_0x7E_dxgmms1!VIDMM_SEGMENT::MarkResourcesForEviction+204
BiosReleaseDate = 11/17/2010
SystemManufacturer = System manufacturer
SystemProductName = System Pro... Read more

http://www.sevenforums.com/bsod-help-support/165501-bsod-new-build.html
Relevancy 39.99%

Hello all Recently I BSOD pc. New build built a custom Pc The build went well New build pc. BSOD for a first timer The problem started with Windows home premeium SP I had two bsod New build pc. BSOD in two days I am not sure what caused them I can't seem to find the dmp text files Next windows failed updating Security Essentials The action center showed red flags for both windows defender and realtime protection I tried turning them on and updates with no luck Finally restored PC to the first MAJOR Updates of them PC only days old My question Is Widows corrupt Do i need to reinstall Should I get rid of Microsofts Security Essentials Any and all help will be greatly appreciated Windows Home Premium -bit SP Computer type Desktop Installation Date PM CPU Intel Core i K Cores Threads Name Intel Core i K Code Name Haswell Package Socket LGA Technology nm Specification Intel Core i - K CPU GHz Family Extended Family Model C Extended Model C Stepping Revision C Instructions MMX SSE SSE SSE SSSE SSE SSE Intel NX VMX AES AVX AVX FMA Virtualization Supported Enabled Hyperthreading Supported Disabled Fan Speed Bus Speed MHz Stock Core Speed MHz Stock Bus Speed MHz Average Temperature F Caches L Data Cache Size x KBytes L Instructions Cache Size x KBytes L Unified Cache Size x KBytes L Unified Cache Size KBytes Cores Core Speed Multiplier Bus Speed Temperature Threads Core MHz x MHz F APIC ID Core MHz x MHz F APIC ID Core MHz x MHz F APIC ID Core MHz x MHz F APIC ID RAM Memory slots Total memory slots Used memory slots Free memory slots Memory Type DDR Size MBytes Channels Dual DRAM Frequency MHz CAS Latency CL clocks RAS to CAS Delay tRCD clocks RAS Precharge tRP clocks Cycle Time tRAS clocks Command Rate CR T Physical Memory Memory Usage Total Physical GB Available Physical GB Total Virtual GB Available Virtual GB SPD Number Of SPD Modules Slot Slot Motherboard Manufacturer Gigabyte Technology Co Ltd Model G Sniper B -CF SOCKET Version To be filled by O E M Chipset Vendor Intel Chipset Model Haswell Chipset Revision Southbridge Vendor Intel Southbridge Model ID C Southbridge Revision System Temperature F BIOS Brand American Megatrends Inc Version F Date Voltage CPU CORE V MEMORY CONTROLLER V V V V V V V - V V - V V V HIGH THRESHOLD V CMOS BATTERY V PCI Data Slot PCI-E Slot Type PCI-E Slot Usage In Use Data lanes x Slot Designation J B Characteristics V Shared PME Slot Number Slot PCI-E Slot Type PCI-E Slot Usage In Use Data lanes x Slot Designation J B Characteristics V Shared PME Slot Number Slot PCI-E Slot Type PCI-E Slot Usage In Use Data lanes x Slot Designation J D Characteristics V Shared PME Slot Number Slot PCI-E Slot Type PCI-E Slot Usage In Use Data lanes x Slot Designation J B Characteristics V Shared PME Slot Number Slot PCI-E Slot Type PCI-E Slot Usage In Use Data lanes x Slot Designation J B Characteristics V Shared PME Slot Number Slot PCI Slot Type PCI Slot Usage In Use Bus Width bit Slot Designation J B Characteristics V Shared PME Slot Number Graphics Monitor Name W on NVIDIA GeForce GTX Current Resolution x pixels Work Resolution x pixels State Enabled Primary Monitor Width Monitor Height Monitor BPP bits per pixel Monitor Frequency Hz Device DISPLAY Monitor Intel HD Graphics Manufacturer Intel Model HD Graphics Device ID - Revision Subvendor Gigabyte Current Performance Level Level Voltage V Driver version Count of performance levels Level NVIDIA GeForce GTX Manufacturer NVIDIA Model GeForce GTX Device ID DE- Revision A Subvendor EVGA Current Performance Level Level Voltage V Technology nm Bus Interface PCI Express x Temperature F Driver version BIOS Version c Physical Memory MB Virtual Memory MB Count of performance levels Level GPU Clock MHz Memory Clock MHz Storage Hard drives ST ST NS SCSI Disk Device Manufacturer Seagate Form Factor quot Heads Cylinders Tracks Sectors SATA type SATA-II Gb s Device type Fixed ATA Standard ATA -ACS Serial Number QJ GASX LBA Size -bit LBA Power On Count times Power On Time days Spe... Read more

A:New build pc. BSOD

Hi,

There are no dump files located in your jcgriff2 output folder. Can you please navigate to C:\Windows\Minidump and manually zip up and attach any crash dumps?

Regards,

Patrick

http://www.techsupportforum.com/forums/f299/new-build-pc-bsod-815674.html
Relevancy 39.99%

I have just completed a new build and i am getting frequent bsod s that come in several varieties I Win 7 in new BSOD build have read some of the other posts on this subject but i wanted to start a new one to make sure i BSOD in new build Win 7 did it BSOD in new build Win 7 right So far i have made sure all my drivers are up to date but i have not tried to remove any hardware yet i downloaded and ran bluescreenview and came up with reports i will post them next here are my specs AMD X x GB gskill DDR Nvidia GeForce GTX Windows amp bit Asus m a t-e Mobo WD Caviar Black drive w GB i also have a wireless card and a SB Audigy card I have had multiple crashes including one where it did an auto scandsk where it found multiple drive errors that it auto fixed im hoping its just the Ram but idk will post bluescreen scan next Dump File - - dmp Crash Time PM Bug Check String NTFS FILE SYSTEM Bug Check Code x Parameter fb Parameter fffff f Parameter fffff f c Parameter fffff d a Caused By Driver Ntfs sys Caused By Address Ntfs sys d File Description Product Name Company File Version Processor x Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File - - dmp Crash Time PM Bug Check String SYSTEM SERVICE EXCEPTION Bug Check Code x b Parameter c Parameter fffff b bb Parameter fffff faa Parameter Caused By Driver ntoskrnl exe Caused By Address ntoskrnl exe File Description NT Kernel amp System Product Name Microsoft Windows Operating System Company Microsoft Corporation File Version win gdr - Processor x Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File - - dmp Crash Time AM Bug Check String NTFS FILE SYSTEM Bug Check Code x Parameter fb Parameter fffff e f Parameter fffff e Parameter fffff d e Caused By Driver Ntfs sys Caused By Address Ntfs sys a e File Description Product Name Company File Version Processor x Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File - - dmp Crash Time AM Bug Check String SYSTEM SERVICE EXCEPTION Bug Check Code x b Parameter c Parameter fffff a Parameter fffff ae Parameter Caused By Driver win k sys Caused By Address win k sys a File Description Product Name Company File Version Processor x Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version

A:BSOD in new build Win 7

well we can also add random app crashes to the list. can anyone give me a next step. should i start taking ram out? should i download that memtest thing.

http://www.bleepingcomputer.com/forums/t/312431/bsod-in-new-build-win-7/
Relevancy 39.99%

Ive been getting random bsod's and I'm not sure why. This is a first time build so it is very frustrating. Any help will be appreciated

A:BSOD 109 On A New Build

  
Quote: Originally Posted by Deansmilk


Ive been getting random bsod's and I'm not sure why. This is a first time build so it is very frustrating. Any help will be appreciated



Memory corruption probably caused by a driver. please run these two tests

1-Memtest.

*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program.

*Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

2-Driver verifier






Quote:
I'd suggest that you first backup your stuff and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

In Windows 7 you can make a Startup Repair disk by going to Start....All Programs...Maintenance...Create a System Repair Disc - with Windows Vista you'll have to use your installation disk or the "Repair your computer" option at the top of the Safe Mode menu .

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to crash to the Blue Screen. Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).

If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.

http://www.sevenforums.com/bsod-help-support/180959-bsod-109-new-build.html
Relevancy 39.99%

Hi All,

I hate my first post to be a problem but I've run out of ideas. I recently built a new PC for work, so no gaming.
I've had around 10 BSOD's a day and can't pin it down to one of my actions. It can be while browsing, using Office or Remote desktop. It even BSOD whilst running the DM Log Collector. The only way I can predict BSOD is when Chrome displays an "aw snap" page.

I have put more RAM in and Reinstalled Windows 10 on different SSD's and M.2 Drives so I would've had more log files if I hadn't.

The BSOD error messages received in order of popularity;
Memory Management
Kernal Security Check
Control Process Died
Page Fault in Non Paged Area.

No missing drivers in Device manager, Windows Updates Completed, Bios up to date, Temps good, running McAfee AV and a mem check for good measure.

Any help much appreciated, zip file attached.

A:BSOD on New Build

My first thought is to check all your cable and hardware connections....make sure they are in the correct slots and ports and that they are all firmly seated. Then disable McAfee and start up and safemode with networking and see if you still get a BSOD.

http://www.tenforums.com/bsod-crashes-debugging/66896-bsod-new-build.html
Relevancy 39.99%

Hi Build New PC BSOD - all Appreciate the level of detail you BSOD - New PC Build go in providing the tool to take all the relevant info and the support you give back Many thanks So I had a Dell XPS which died and therein i learnt it wasn't BSOD - New PC Build really upgradable so went to NovaTech and purchased the necessary components to create a New PC PC - CoolerMaster Case Intel I Gigabyte GA- X-UD H Motherboard Ballistix Sport GB X GB Sapphire HD gig BSOD - New PC Build SSD Drive I can't remember the make off the top of my head This is all weeks old This is the third Motherboard I've had in as many weeks with the current being about weeks old the other two died completely zero power etc after a few hours of being on and BSOD all the way through the Windows Install Speaking of - x -bit or x - bit - the original installed OS on the system - Its a Retail copy of Windows Pro - an OEM or full retail version Full Retail - What is the age of system hardware - Weeks - What is the age of OS installation - weeks'ish Currently its BSOD randomly however significantly less than the previous two motherboards and I can play games Syndicate for example for hours without it worrying I did have it running on x quot p Monitors however that just increased the instability so returned to a single quot I did want to do Graphic design D editing however I'm honestly concerned about the loss of data with it so prone to fail Please see attached and I'd really appreciate if anyone could shed some light NovaTech as much as I rate them have no idea Kind Regards

A:BSOD - New PC Build

Having read through a number of other BSOD threads its all pointing towards potentially being the SSD, so will go and pick up a SATA HD this weekend for testing whilst you guys review the above.

Many thanks.

http://www.sevenforums.com/bsod-help-support/236445-bsod-new-pc-build.html
Relevancy 39.99%

Hi there

Yesterday i just installed window 7 on my hdd and it started giving bsod and its also freeze the screen, white background with black dot. Please help me. All files are attached down below.

System:
CPU: AMD Phenom X2 550(AM3, 3.10GHz, Unlocked)
CPU-Fan: Cooler Master Hyper TX3 Evo
RAM: Kingston 1333mhz ddr3 2gb
Mobo: Asus M4n68t-m le v2
HDD: WD Sata 500GB
Graphic card: Zotac GTX 550TI, 1GB GDDR5
Power Supply: OCZ Fatal1ty 550w

A:BSOD on AMD build, HELP !!!!!!!

Hi, and welcome to TSF.

Please follow our Blue Screen of Death (BSOD) Posting Instructions - Windows 10, 8.1, 8, 7 & Vista

No need to start a new thread. Post results back here please.

http://www.techsupportforum.com/forums/f299/bsod-on-amd-build-help-1163529.html
Relevancy 39.99%

Not sure if this belongs in the hardware forum but more than likely I just upgraded my computer see below for specs I ve built many computers so I know my way around the hardware Everything was running fine No problems installing windows The first BSOD I noticed was not long after I was finished installing windows I left my computer running for a couple hours and when I returned it was sitting at the BSOD I figured it was just a glitch so I just restarted and everything seemed fine Then I was playing in a game and it happened again This time I recorded the stop error x A x x c x x FC I thought maybe my temps were getting too high while in the game but they didn t seem too bad when I checked them I didn t write them down but I went ahead and checked my cpu fan BSOD's...New Build. and adjusted it a bit to ensure that it was seated properly I checked the temps again and they were lower but it was probably just a coinceidemce Anyway I didn t see any more BSOD s for a couple days and BSOD's...New Build. I thought I was over them until just a while ago I went to BSOD's...New Build. install my printer and when I inserted the disk I get another BSOD x A xFFFFFFFC x c x x F Anybody know how to read these and can tell me what they mean Thanks RC nbsp

Relevancy 39.99%

Hey guys Ive just built a pc and I keep getting bsod s I was wondering if I could get any answers as to why its doing this and if it was my fault do to a mistake in putting it all together so i still get warenty I did follow the instructions very very carefully and read numerous guides before doing the build Its at a pc shop now because I couldnt work out how to fix it but the shop is incredibly BSOD a new build. on slow so I thought id ask here in the mean time So far to try and fix the issue ive ran mem tests for hours each which have retuned no errors Formatted and re installed windows about times ive installed different versions of windows off different cd s just to see if it was my windows cd s Ive opened it up and checked all connections and looked on the motherboard for any obvious damages I also upped the voltages to the ram from to v All tempatures are fine aswell I also updated the BIOS Also in a rather curious twist when I installed my tv card and tried to load the app bundled with it to use it it returns the error fail to build direct x required BSOD on a new build. but when i used the same cd and card in a different machine it BSOD on a new build. works fine Formatting and re-installing windows didnt work I have an error code from the memory dump Stop x e xc x dd xb eedbb x also it says BSOD on a new build. the problem or error was caused by wink sys I also noticed that the processes that have caused the crash have been different once it was messenger the other time firefox etc Sorry for not having the full details of the dump but its at the shop atm here are the specs of my PC cpu Intel Core Extreme qx ghz fsb mb l cache mobo Asus Striker II Formula n i SLI PCIe Ram gb Corsair twin x - c HDD gb seagate m ST AS GPU ESS GF Gs mb DDR PSU Thermaltake Toughpower w thanks guys nbsp

Relevancy 39.99%

Hi all This is my first build and I am constantly getting BSOD I really appreciate all the help I am going to receive from experts here The error always point to quot Platform Specific Hardware Error Driver win rtm - Microsoft Corporation -- -- first Please help BSOD My build C Windows system PSHED dll quot Specs AMD My first build -- BSOD -- Please help Phenom II X T A-Data X GB G PC - - - - V XFX Black Edition P - B-CAG W PSU ASUS M A TD-V EVO USB ASUS Black X DVD R X DVD RW Windows Home Premium bit OEM Cooler Master Hyper Cooler This is third fresh installation on this system with needed drivers and no windows updates are applied at this time The system is not overclocked Below are the hardware diagnostics I have run on my build already Hard Drive is tested for errors with Samsung ESTools Drive Testing Utility No Errors RAM is tested in DIMM DIMM slots for errors using Memtest V Passes No Errors RAM is tested in DIMM DIMM slots for errors using Memtest V Passes No Errors CPU is tested with IntelBurnTest for iterations Prime for hours Linx for My first build -- BSOD -- Please help hours and found no issues sfc scannow has found zero errors CPU temperature is always lt C during stability testing and lt C during normal load Motherboard temperature is always lt C I have already spent more than hours with no outcome Please provide some pointers to where to look for this error Thank You venky

A:My first build -- BSOD -- Please help

Welcome to SF, Vensky.

Some thoughts....

We're having a problem with atdcm64a.sys. Uninstall Catalyst and just install the driver for ATI.

Is your mobo TD-V or TD-M?

http://www.sevenforums.com/bsod-help-support/113877-my-first-build-bsod-please-help.html
Relevancy 39.99%

Yesterday I powered on my new system. Most of the parts are new, but I re-used the tower and video card from my old system. After an hour of playing either Skyrim, or World of Warcraft, my computer blue screens with different reasons the few times it has happened.

Once was "irql_not_less_or_equal" and another was Kernal-Power 41.

-

OS: Windows 7 (64 bit) (Was the only OS ever used.)
The OS is an OEM version that came with my computer. I got the original many years ago from iBuyPower.

The tower and video card (Radeon HD 5450) are a few years old. I can't give an exact age, but I've had the PC for 2-3 years.

The OS was freshly installed on my new build Sunday morning.

CPU: Intel Core i5-4670K
Video Card: Radeon HD5450
Motherboard: Asus B85M
Power Supply: Cooler Master Extreme Power Plus 700W

A:BSOD - New build.

Hi,

We have a few different bugchecks attached here:

BAD_POOL_HEADER (19)

Usual cause is a device driver has a bug.

This indicates that a pool header is corrupt.

Your *19 appears to be faulting iusb3xhc.sys which is the Intel(R) USB 3.0 eXtensible Host Controller Driver. Ensure this driver is up to date via - http://downloadcenter.intel.com/


Quote:




scmndisp fffff880`01836000 fffff880`01840000 Wed Jan 17 02:48:03 2007 (45add4b3) 00008b81 scmndisp.sys




^^ Netgear Neutral Wireless Solution dated from 2007. See if an update is available - http://kb.netgear.com/app/

DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)

A kernel-mode driver attempted to access pageable memory at a process IRQL (Interrupt Request Level) that was too high.

Usual causes are a device driver has a bug and attempted to access invalid memory, the pagefile has been corrupted or there is a memory problem.

SYSTEM_SERVICE_EXCEPTION (3b)

An exception happened while executing a routine that transitions from non-privileged code to privileged code.

This bugcheck is generally related to a video driver issue.

Ensure you have the latest video card drivers. If you are already on the latest video card drivers, uninstall and install a version or a few versions behind the latest to ensure it's not a latest driver only issue. If you've already tried the latest version as well as many possible previous versions, you can try a beta driver if available.

If the above do not help, enable Driver Verifier to see if we can catch any possible device driver conflicts:

Driver Verifier:

What is Driver Verifier?

Driver Verifier is included in Windows 8, 7, Windows Server 2008 R2, Windows Vista, Windows Server 2008, Windows 2000, Windows XP, and Windows Server 2003 to promote stability and reliability; you can use this tool to troubleshoot driver issues. Windows kernel-mode components can cause system corruption or system failures as a result of an improperly written driver, such as an earlier version of a Windows Driver Model (WDM) driver.

Essentially, if there's a 3rd party driver believed to be at issue, enabling Driver Verifier will help flush out the rogue driver if it detects a violation.

Before enabling Driver Verifier, it is recommended to create a System Restore Point:

Vista - START | type rstrui - create a restore point
Windows 7 - START | type create | select "Create a Restore Point"
Windows 8 - Restore Point - Create in Windows 8

How to enable Driver Verifier:

Start > type "verifier" without the quotes > Select the following options -

1. Select - "Create custom settings (for code developers)"
2. Select - "Select individual settings from a full list"
3. Check the following boxes -
- Special Pool
- Pool Tracking
- Force IRQL Checking
- Deadlock Detection
- Security Checks (Windows 7)
- Concurrentcy Stress Test (Windows 8)
- DDI compliance checking (Windows 8)
- Miscellaneous Checks
4. Select - "Select driver names from a list"
5. Click on the "Provider" tab. This will sort all of the drivers by the provider.
6. Check EVERY box that is NOT provided by Microsoft / Microsoft Corporation.
7. Click on Finish.
8. Restart.

Important information regarding Driver Verifier:

- If Driver Verifier finds a violation, the system will BSOD.

- After enabling Driver Verifier and restarting the system, depending on the culprit, if for example the driver is on start-up, you may not be able to get back into normal Windows because Driver Verifier will flag it, and as stated above, that will cause / force a BSOD.
If this happens, do not panic, do the following:

- Boot into Safe Mode by repeatedly tapping the F8 key during boot-up.

- Once in Safe Mode - Start > type "system restore" without the quotes.

- Choose the restore point you created earlier.
If you did not set up a restore point, do not worry, you can still disable Driver Verifie... Read more

http://www.techsupportforum.com/forums/f299/bsod-new-build-704394.html
Relevancy 39.99%

Hey guys I just put together a new system and have only had this one issue, a BSOD specifically when playing Rome Total War 2. I have a feeling it is a memory leak within the game since it has been a pretty buggy launch but it doesn't hurt asking in case it is something else.

I have also tried different drivers for the video card, stable and beta with similar results, no issues during the stress tests for the video card or cpu though and memtest passed as well.
OS: Windows 8 64bit
Version: OEM
Age of System: less than a month
CPU: Intel i5 4670k-Haswell 3.4ghz
Motherboard: MS-7821
Video Card: MSI N770-2GD5/OC GeForce GTX 770
Power Supply: EVGA Supernova 750W

A:BSOD new build

e22w8x64.sys Mon Dec 3 10:42:37 2012(Killer Networks Ethernet Card. Driver dated Mon Dec 3 10:42:37 2012 has Qualcomm Atheros Killer Service) is named in all 3
I did find this on the MSI site of all places> MSI USA it should work for your desktop.


Code:
Debug session time: Sat Sep 7 16:21:08.414 2013 (UTC - 4:00)
Loading Dump File [C:\Documents and Settings\Owner\Bsodapps\SysnativeBSODApps\090713-3687-01.dmp]
Built by: 9200.16628.amd64fre.win8_gdr.130531-1504
System Uptime: 0 days 21:07:38.195
*** WARNING: Unable to verify timestamp for e22w8x64.sys
*** ERROR: Module load completed but symbols could not be loaded for e22w8x64.sys
Probably caused by : e22w8x64.sys ( e22w8x64+1c353 )
BugCheck D1, {fffff8800dd4e000, 2, 0, fffff88004af8353}
BugCheck Info: DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
Bugcheck code 000000d1
Arguments:
Arg1: fffff8800dd4e000, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000000, value 0 = read operation, 1 = write operation
Arg4: fffff88004af8353, address which referenced memory
BUGCHECK_STR: 0xD1
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: Rome2.exe
FAILURE_BUCKET_ID: X64_0xD1_e22w8x64+1c353
MaxSpeed: 3400
CurrentSpeed: 3400
BiosVersion = V1.4
BiosReleaseDate = 08/18/2013
SystemManufacturer = MSI
SystemProductName = MS-7821

http://www.techsupportforum.com/forums/f299/bsod-new-build-711089.html
Relevancy 39.99%

This is my first build Windows AMD Phenom II X Black Edition ASUS M A XTD EVO G SKILL Ripjaws Series GB x GB SAPPHIRE - GHDMI Radeon HD GB Western Digital Caviar Blue WD AAKS GB Antec EarthWatts EA W So basically the pattern here is that whenever i shut down the computer for more than a few hours like i will get a bsod Specifically CI dll and 'Front Fault in nonpaged area' I would have to New BSOD build, manually turn off the computer and turn New build, BSOD on again which would fix the prob Once i do New build, BSOD that i could use the desktop for as long as i want and I can restart it with no prob Again the bsod happens if i New build, BSOD turn off the computer for a long period of time I've had people tell me it's the ram but i did a whole days worth of memtest and no problems Maybe you guys have some clue to this prob Regards

A:New build, BSOD

Your problem may have something to do with this reported problem:
Microsoft details Windows 7 memory leaks, hangs, freezes

Your system's problem might be how it reacts to this memory leak bug. Anything is possible, in this type of situation.


Quote:




Microsoft has been tracking some odd issues that occur on Windows 7 and Windows Server 2008 R2. These bugs are not typically fixed via Windows Update, because these hotfixes should only be applied to systems that are experiencing specific problems. So if you are not severely affected by either of them, wait for the relevant service packs. Here are the four most prominent issues, listed in order of decreasing severity.

The first manifests itself when the computer crashes after it runs for some time ...




The 'hotfix' in the above article is not part of any normal 'Update', so you do not get it unless you specifically request it.

Another thing that I always try, [almost] regardless of the actual computer's failure symptoms, is a known-good power supply.

A power supply that is putting out incorrect voltages, or that has a lot of AC noise on the DC outputs, can appear as almost any problem under the sun. Even a brand-new power supply, from a reputable manufacturer, can be bad.

Power supplies today are so inexpensive, that I always have a selection of various sizes on-hand at all times (it helps that I am an OEM of custom-built computers).

Something else, that often fixes 'unstable' machines, is to [when the power is off and the computer's case is open] basically un-plug (disconnect) and re-plug (connect) all connectors, RAM (DIMM) modules, the CPU chip, etc. You should be sure to do this (un-plug and re-plug) on every connector that you can see, inside your computer.

It is surprising, how many 'weird' problems can be traced to a simple 'the connector was not fully plugged in' type of problem.

One more thing, is to make sure that your RAM size/configuration/part number, is supported by your Motherboard's 'Qualified Vendors List', or 'QVL' for short.

In ASUS Motherboard manuals, the QVL will be in the section describing how to install the RAM (DIMM) modules into the Motherboard.

For example, in the ASUS M4A79T Deluxe manual (I have 2 of these Motherboards), the QVL is in Section 2.4.2 'Memory configurations', starting on Page 2-12.

I hope this helps,
Art

http://www.techsupportforum.com/forums/f299/new-build-bsod-468742.html
Relevancy 39.99%

Just built this system. I get numerous BSOD errors, the one that annoys me the most is 0x00000001E and 0x0000003B.
Other less frequent BSODs include:
0x000000A
0x000000FE
0x0000004E
0x00000019

All my pc specs should be in my profile.

The crashes wont let me play BF BC2.

A:New build and a BSOD

Just tried launching BFBC2 again. As soon as i hit resume game i got the error
0x0000007E but there was no dump created

http://www.sevenforums.com/bsod-help-support/181752-new-build-bsod.html
Relevancy 39.99%

Hello all I am a relative novice who has been doing my own upgrades for about years I just started from scratch and built a new system Windows x Home Premium Service Pack Intel i K Asus MAXIMUS VI HERO LGA MB Asus GeForce GTX Ti Boost Corsair Vengeance Gb X DDR Rosewell Hive Watt PS WD Black TB HD Samsung EVO GB SSD At first install I loaded Windows on the SSD and started installing programs and setting up e-mail etc I began getting BSOD quot Stop X quot I added all Windows updates updated all drivers and still was getting same BSOD after running for a while I checked the installation of all hardware and cables no help I tried a new install of Windows this time installing it on the WD HD Still no good I tried my DIMM's one at a time and switched my Video card out with an older one I had Still no help By now I can't even finish installing Windows updates without getting BSOD I have attached the files requested in BSOD Build New the quot BSOD Posting Instructions quot Any New Build BSOD help is much New Build BSOD appreciated John

http://www.techsupportforum.com/forums/f299/new-build-bsod-744721.html
Relevancy 39.99%

Hi,

need some help. My system is running Win7 Ultimate 64bit.
-Intel Q9650(3Ghz) overclocked to 3.5Ghz
-Gigabyte GA-P35-DS3
-4gb DDR2 800Mhz
-250gb WD Cavier Blue
-Freezer Pro rev2
System has been running stable for about 3 weeks now. Changed the hard drive 3days ago and yesterday i had 3 BSODs, non so far today.

Any help will be very much appreciated.

I have attached the Windows_NT6_BSOD file and Perfmon report file.

A:BSOD on new build

more info about BSOD

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 2057

Additional information about the problem:
BCCode: 3b
BCP1: 00000000C0000005
BCP2: FFFFF80002ECB4FE
BCP3: FFFFF880083FEE20
BCP4: 0000000000000000
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\052611-18252-01.dmp
C:\Users\Dave Quadcore\AppData\Local\Temp\WER-39624-0.sysdata.xml

Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

http://www.sevenforums.com/bsod-help-support/165382-bsod-new-build.html
Relevancy 39.99%

Hello everyone and Happy New Year Having BSOD issues with my computer Log in working or gaming for a while then the BSOD happens out of nowhere It s a new build I put together in the last couple of months Any Build BSOD New help will be greatly appreciated I updated the motherboard drivers etc The box itself has five fans running Spent money on high end thermo paste My brother and I took the time to make sure there wasn t too much or too little paste and that there were no bubbles Tech Support Guy System Info Utility version OS Version Microsoft Windows BSOD New Build Professional bit Processor AMD Phenom tm Quad-Core Processor AMD Family Model Stepping Processor Count BSOD New Build RAM Mb Graphics Card ATI Radeon HD Mb Hard Drives C Total - MB Free - MB D Total - MB Free - MB E Total - MB Free - MB Motherboard ASUSTeK Computer INC M A BSOD New Build -M Rev X x Antivirus ESET NOD Antivirus Updated and Enabled My zipped MiniDump files can be found at http attachments techguy org attachment php attachmentid amp stc amp d Thank you in advance for any advice or solutions that you may have VDC nbsp

https://forums.techguy.org/threads/bsod-new-build.971607/
Relevancy 39.99%

I build a new rig and it runs great my specs will be posted below but just click my name and about me and it has specs there as well My only problem is when I play WoW New Build BSOD the pc will randomly crash hours into gaming hours mins Usually the screen will freeze with the sound repeating During this lock up the New Build BSOD keyboard wont work or the mouse I cannot ctrl alt delete or tab out New Build BSOD so it forces me to hard boot Sometimes the freeze is diffrent example the screen will just go black or the monitor will say quot no signal quot while the pc keeps running hard boot My grx card has green lights on it that are suppost to turn red when it's failing over heating or whatever but they always remain green and have never turn red since i installed it Today I got the BSOD heres the info from that and I will also include comp specs right after this post BSOD Fault bucket X x E dxgkrnl VIDMM GLOBAL ReferenceAllocationForPreparation c type Event Name BlueScreen Response None Cab Id Problem signature P P P P P P P P P P Attached files C Windows Minidump Mini - dmp C Users Scott AppData Local Temp WER- - sysdata xml C Users Scott AppData Local Temp WER CD tmp version txt These files may be available here C ProgramData Microsoft Windows WER ReportArchive Report e c event iD System - Provider Name Windows Error Reporting - EventID Qualifiers Level Task Keywords x - TimeCreated SystemTime - - T Z EventRecordID Channel Application Computer Scott-PC Security - EventData X x E dxgkrnl VIDMM GLOBAL ReferenceAllocationForPreparation c BlueScreen None C Windows Minidump Mini - dmp C Users Scott AppData Local Temp WER- - sysdata xml C Users Scott AppData Local Temp WER CD tmp version txt C ProgramData Microsoft Windows WER ReportArchive Report e c

A:New Build BSOD

specs:
Code:

OS Name Microsoft? Windows Vista? Ultimate
Version 6.0.6001 Service Pack 1 Build 6001
x64-based PC

Gigabyte EP45-UD3P mobo

Intel(R) 2 Duo CPU E8500 @ 3.16GHz, 3800 Mhz, 2 Core(s), 2 Logical
BIOS Version/Date Award Software International, Inc. F9, 4/16/2009
SMBIOS Version 2.4

4gb ram

750w power supply

SONY DVD RW DRU-V200A ATA Device

Saphire ATI Radeon HD 4870 1gb with full updated drivers
Catalyst? Version 09.9

Aftermarket cpu cooler, 3 big fans,

dxdaig:

System Information
------------------
Time of this report: 10/24/2009, 17:30:24
Machine name: SCOTT-PC
Operating System: Windows Vista? Ultimate (6.0, Build 6001) Service Pack 1 (6001.vistasp1_gdr.090805-0102)
Language: English (Regional Setting: English)
System Manufacturer: Gigabyte Technology Co., Ltd.
System Model: EP45-UD3P
BIOS: Award Modular BIOS v6.00PG
Processor: Intel(R) Core(TM)2 Duo CPU E8500 @ 3.16GHz (2 CPUs), ~3.8GHz
Memory: 4094MB RAM
Page File: 1297MB used, 7124MB available
Windows Dir: C:\Windows
DirectX Version: DirectX 10
DX Setup Parameters: Not found
DxDiag Version: 6.00.6001.18000 64bit Unicode

------------
DxDiag Notes
------------
Display Tab 1: No problems found.
Sound Tab 1: No problems found.
Sound Tab 2: No problems found.
Input Tab: No problems found.

--------------------
DirectX Debug Levels
--------------------
Direct3D: 0/4 (retail)
DirectDraw: 0/4 (retail)
DirectInput: 0/5 (retail)
DirectMusic: 0/5 (retail)
DirectPlay: 0/9 (retail)
DirectSound: 0/5 (retail)
DirectShow: 0/6 (retail)

---------------
Display Devices
---------------
Card name: ATI Radeon HD 4800 Series
Manufacturer: ATI Technologies Inc.
Chip type: ATI display adapter (0x9440)
DAC type: Internal DAC(400MHz)
Device Key: Enum\PCI\VEN_1002&DEV_9440&SUBSYS_0851174B&REV_00
Display Memory: 2809 MB
Dedicated Memory: 1018 MB
Shared Memory: 1791 MB
Current Mode: 1920 x 1080 (32 bit) (60Hz)
Monitor: SyncMaster P2350/P2350G,SyncMaster Magic P2350G(Digital)
Driver Name: atiumd64.dll,atidxx64.dll,atiumdag,atidxx32,atiumdva,atiumd6a.cap,atitmm64.dll
Driver Version: 8.14.0010.0697 (English)
DDI Version: 10.1
Driver Attributes: Final Retail
Driver Date/Size: 8/13/2009 21:49:38, 4629504 bytes
WHQL Logo'd: Yes
WHQL Date Stamp:
Device Identifier: {D7B71EE2-D700-11CF-4276-5B28A1C2C535}
Vendor ID: 0x1002
Device ID: 0x9440
SubSys ID: 0x0851174B
Revision ID: 0x0000
Revision ID: 0x0000
Video Accel: ModeMPEG2_A ModeMPEG2_C
Deinterlace Caps: {6E8329FF-B642-418B-BCF0-BCB6591E255F}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
{6E8329FF-B642-418B-BCF0-BCB6591E255F}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB Video... Read more

http://www.techsupportforum.com/forums/f299/new-build-bsod-425341.html
Relevancy 39.99%

Hi All,

After being faced with the common issues my previous DELL system gave me, and realising its not a problem... its just Dell, I realised it was time for a change... a bit of an upgrade...

However I seem to be experiencing some BSOD issues whilst gaming, and was wondering if I could ask the experts to provide me with some expertise as to what my issue might be.

Below are my system specs:

AMD Phenom II x6 1055T
ASUS M4A72T Deluxe
8 GB Corsair Dominator 1600Mhz
ATI Sapphire HD 5830
AOC - 22.1" 1920x1020
2 x Western Digital 600 GB
Corsair GS600
Aerocool PGS b

I have attached my BSOD dmp files (3 in total) that I've had since my new setup.

Hope you can help!

Thanks in advance.

Michael

A:BSOD - New Build PC

Performed the sfc scan, came back negative. windows Resource Protection did not find any integrity violations.

http://www.sevenforums.com/bsod-help-support/140316-bsod-new-build-pc.html
Relevancy 39.99%

? OS - Windows 7 Pro
? x86 64bit
? HDD - WD 640gb Caviar Black (new)
? OS Windows 7 64bit Full Retail Version (Newegg)
? Age of OS installation - less than a week
? CPU i5 760 Lynnfield
? Video Card - ASUS ENGTX 460
? MotherBoard - ASUS P7P55D-E Pro
? Power Supply - Corsair TX850

BSOD has been happening frequently and mainly while using explorer. I really don't know what else to say because I haven't had time to work with it due to shut down problems.

I am concerned as to why the reports which were generated note that all my hardware is performing poorly. I am sure we can get this figured out though--you guys always do:)

thanks

A:New Build BSOD

There are issues with a PLXTech switch (most likely a PCI Express device).
Do you have such a device installed on your system?

The performance ratings may be significant - but what do your Windows Experience Index scores show?

Please visit Windows Update and ensure that you have all updates for your system. You appear to be short at least a few.

It is possible that the following older drivers may be causing your problems.
Please either REMOVE or Update the older drivers listed below.

Quote:




HOW TO FIND DRIVERS:
DO NOT use Windows Update or the Update Driver function of Device Manager as they are not the most current versions available.
Also, DO NOT update from the PC Manufacturer's website unless the Driver Reference cited below states that you should get the drivers from the OEM.

The most common drivers are located on this page: http://www.carrona.org/dvrref.html
If you can't find the driver, post back and we'll see what we can find.

Here's the older drivers that were found in the memory dump files:

Code:

ATKDispLowFilter.sys Tue May 13 23:03:13 2008 (482A5671)
- ASUSTeK Display Lower Filter
- http://www.carrona.org/dvrref.html#ATKDispLowFilter.sys

asusgsb.sys Thu Sep 27 09:14:50 2007 (46FBACCA)
- ASUS Virtual Video Capture Device Driver
- http://www.carrona.org/dvrref.html#asusgsb.sys






The memory dumps may point to a hardware cause for this - but let's see what the above steps do first. Please post back if you experience further issues after trying the stuff that I suggested.

While waiting you can try these free diagnostics:

Quote:




I suggest starting all troubleshooting with the following diagnostic tests. They'll save you a lot of time and heartache if there is a hardware failure, and you'll have the disks on hand in case you need them in the future:

Quote:




H/W Diagnostics:
Please start by running these bootable hardware diagnostics:
http://www.carrona.org/memdiag.html (read the details at the link)
http://www.carrona.org/hddiag.html (read the details at the link)

Also, please run one of these free, independent online malware scans to ensure that your current protection hasn't been compromised: http://www.carrona.org/malware.html (read the details at the link)









BSOD BUGCHECK SUMMARY

Code:

Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Tue Nov 23 15:11:34.063 2010 (UTC - 5:00)
System Uptime: 0 days 0:15:28.514
Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+33906 )
BUGCHECK_STR: 0x1a_41790
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: iexplore.exe
Bugcheck code 0000001A
Arguments 00000000`00041790 fffffa80`004e9120 00000000`0000ffff 00000000`00000000
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Tue Nov 23 14:54:46.407 2010 (UTC - 5:00)
System Uptime: 0 days 0:26:18.859
*** WARNING: Unable to verify timestamp for eamon.sys
*** ERROR: Module load completed but symbols could not be loaded for eamon.sys
Probably caused by : Ntfs.sys ( Ntfs!NtfsPagingFileIo+155 )
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x24
PROCESS_NAME: TrustedInstall
Bugcheck code 00000024
Arguments 00000000`000c08a2 00000000`00000000 00000000`00000000 00000000`00000000
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Mon Nov 22 19:41:34.337 2010 (UTC - 5:00)
System Uptime: 0 days 0:21:42.788
Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+33906 )
BUGCHECK_STR: 0x1a_41790
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: SearchIndexer.
Bugcheck code 0000001A
Arguments 00000000`00041790 fffffa80`00aa3b20 00000000`0000ffff 00000000`00000000
???????????????????????????????????????????????????????????????????... Read more

http://www.techsupportforum.com/forums/f299/new-build-bsod-530678.html
Relevancy 39.99%

Hello I have recently build a new computer i did a fresh install of windows bit After that i let it update and installed all other software i need Now every time the computer first starts up i get the Blue screen of death - BSOD After that i have to let it self-restart a few times I get an average of BSOD before i get to a stable point where it doesn New pc build BSOD - getting t crash After that the computer runs fine The crash happens just on the welcome screen or shortly after when the desktop shows up With that random programs start to crash like explorer exe ati control center etc and then the blue screen I have tried the safe mode but it also crashes a few minutes later I have formated the pc times already suspecting bad software the first startups and restarts worked but then the same problem i have also updated the bios to the latest version and tested the sicks of ram with memtest for passes with no error and set the default ram timmings in bios i took a look on the dump files but i haven t come to any significant conclusion i hope you will the Blue screens vary so i don t know where to start solving it next There is my setup Tech Support Guy System Info Utility version OS Version Microsoft Windows Ultimate bit Processor AMD Phenom tm II X T Processor AMD Family Model Stepping Processor Count RAM Mb Graphics Card AMD Radeon HD Series Mb New build pc - getting BSOD Hard Drives C Total - MB Free - MB D Total - MB Free - MB F Total - MB Free - MB Motherboard MSI FXA-GD MS- To be filled by O E M Antivirus ESET Smart Security Updated and Enabled nbsp

A:New build pc - getting BSOD

most of them are ntoskrnl.exe

need to do house work first

do a full check disk from explorer right click C drive properties tools error checking tick both boxes

then start type cmd right click run as administrator then type sfc /scannow

then re create your page file as you have crash from that

start right click my computer properties advanced performance settings advanced page file click change delete the one you have ( no page file) re boot then back to there create new @ 4000 min 4000 max do not let windows manage it

start type msconfig enter adnavced change settings to 6 cores and ram to 4096

re check all connectors seating of cables especially to HDD, check motherboard chips for loose ones

after all that re check drivers

http://www.driverupdate.net/ free version on left

you are not getting many crashes for a new build so would not worry too much

 

https://forums.techguy.org/threads/new-build-pc-getting-bsod.977651/
Relevancy 39.99%

Please help I wanna play swtor on 12/20/2011 ..i am afraid with this bsod that I will have issues ....I attached the file it said to attach...thank you

A:bsod on new pc build please help

sorry I forgot to post my system specs...this is my new build

Windows 7 Home Premium 64bit.
amd fx 6 core 6100 3.3ghz am3+
MB ASUS|M5A97 970 AM3+ SB950 R
MEM 4Gx2|GSKILL F3-12800CL9D-8GBRL 16g total 4 sticks
VGA EVGA|01G-P3-1556-KR GTX550 TI R
HDD 1.5T|WD WD15EARS-FR REC
PSU RAIDMAX | HYBRID2 RX-630SS 630W

http://www.sevenforums.com/bsod-help-support/202315-bsod-new-pc-build-please-help.html
Relevancy 39.99%

I just built a system withthe following specs:
-CPU: Intel Q9550 Core 2 Quad 2.83 Mhz.
-MoBo: GA EP45-UD3P rev 1.0
-RAM: OCZ Reaper 2x2GB DDRII
-Video Card: EVGA GT 220 1GB DDRIII
-Power Supply: OCZ 700 SXS 700W
-Case: CM Storm Scout
-Optical Drive: DVD BURNER LG | GH24NS50
-Hard Drive: 1TB 7200RPM Seagate
OS: Windows 7 Ultimate 64-bit
The problem is I've been getting BSOD's by different reasons, since this is my first build I've tried many things to solve this problem; like updating all the drivers, the BIOS and so on, but the blue screens don't seem to stop. I'm starting to think it might be a hardware problem.
I'm attaching the dump files created during the crashes. Any help would be greatly appreciate it. Thanks.

A:BSOD on DIY build

Have you read this section yet, so we don't have to ask you a long list of questions.


Questions to use for help with Installation Issues


One of our Gurus will read your dump file & get back to you quickly.

Welcome to SevenForums

http://www.sevenforums.com/bsod-help-support/55677-bsod-diy-build.html
Relevancy 39.99%

Hi, ive just recently built a computer from scratch, and have been experiencing multiple instances of BSOD, most of the times they occured was when playing computer games or browsing on Firefox. Any Help would be very much appreciated

OS - Windows 7
x86 - x64
Full Retail version of windows 7
CPU - Intel(R) Core(TM) 15-3570kk CPU @ 3.40GHZ 3.80 GHZ
Video Card - AMD Radeon HD 7850
Motherboard - GByte GA-Z77X-D3H Z77
Power Supply - Cooler Master Silent Pro Modular 700W '80 Plus Bronze' Power Supply

Relevancy 39.99%

I wanna play swtor on 12/20/2011 ..i am afraid with this bsod ERRORS. that I will have issues ....I attached the file it said to attach..hope this helps ..thanks in advance

system specs
Windows 7 Home Premium 64bit.
amd fx 6 core 6100 3.3ghz am3+
MB ASUS|M5A97 970 AM3+ SB950 R
MEM 4Gx2|GSKILL F3-12800CL9D-8GBRL 16g total 4 sticks
VGA EVGA|01G-P3-1556-KR GTX550 TI R
HDD 1.5T|WD WD15EARS-FR REC
PSU RAIDMAX | HYBRID2 RX-630SS 630W

A:Bsod on new pc build

  
Quote: Originally Posted by bobbywyatt


I wanna play swtor on 12/20/2011 ..i am afraid with this bsod ERRORS. that I will have issues ....I attached the file it said to attach..hope this helps ..thanks in advance

system specs
Windows 7 Home Premium 64bit.
amd fx 6 core 6100 3.3ghz am3+
MB ASUS|M5A97 970 AM3+ SB950 R
MEM 4Gx2|GSKILL F3-12800CL9D-8GBRL 16g total 4 sticks
VGA EVGA|01G-P3-1556-KR GTX550 TI R
HDD 1.5T|WD WD15EARS-FR REC
PSU RAIDMAX | HYBRID2 RX-630SS 630W


Best advice that I've seen about this error (from here: http://www.sevenforums.com/crashes-d...tml#post356791 )





Quote:
What you're looking for will be in one of the following categories:

a) BIOS bug
b) a driver whose activity is causing the target processor to lock up
c) a hardware defect (temperature, voltage, dust, RFI, outright borkedness...)


Check the drivers
Check the inside of the case (temperature, voltage, dust, etc).
Run Furmark, and Prime95 below.





Quote:
Try this free video stress test: FurMark: VGA Stress Test, Graphics Card and GPU Stability Test, Burn-in Test, OpenGL Benchmark and GPU Temperature | oZone3D.Net
Try this free stress test: Free Software - GIMPS







Quote:
Prime95 Setup:
- extract the contents of the zip file to a location of your choice
- double click on the executable file
- select "Just stress testing"
- select the "Blend" test. If you've already run MemTest overnight you may want to run the "Small FFTs" test instead.
- "Number of torture test threads to run" should equal the number of CPU's times 2 (if you're using hyperthreading).
The easiest way to figure this out is to go to Task Manager...Performance tab - and see the number of boxes under CPU Usage History
Then run the test for 6 to 24 hours - or until you get errors (whichever comes first).
The Test selection box and the stress.txt file describes what components that the program stresses.

http://www.sevenforums.com/bsod-help-support/202455-bsod-new-pc-build.html
Relevancy 39.99%

Here are my Please BSOD help, build new BSOD results of them here are some of the bsods Note that each new one is seperated by Please help, new build BSOD the line - - dmp PFN LIST CORRUPT x e d ff d Please help, new build BSOD fc nvlddmkm sys nvlddmkm sys e x ntoskrnl exe cc C Windows MiniDump - - dmp - - dmp PFN LIST CORRUPT x e beb bda ntoskrnl exe ntoskrnl exe cc NT Kernel amp System Microsoft Windows Operating System Microsoft Corporation win sp gdr - x ntoskrnl exe cc C Windows MiniDump - - dmp - - dmp PFN LIST CORRUPT x e edccb b cb ntoskrnl exe ntoskrnl exe cc NT Kernel amp System Microsoft Windows Operating System Microsoft Corporation win sp gdr - x ntoskrnl exe cc C Windows MiniDump - - dmp - - dmp MEMORY MANAGEMENT x a fffff e e b fffff c fltmgr sys fltmgr sys f x ntoskrnl exe cc C Windows MiniDump - - dmp - - dmp MEMORY MANAGEMENT x a fffff cc b fffff ntoskrnl exe Please help, new build BSOD ntoskrnl exe cc NT Kernel amp System Microsoft Windows Operating System Microsoft Corporation win sp gdr - x ntoskrnl exe cc C Windows MiniDump - - dmp - - dmp MEMORY MANAGEMENT x a fffff dea cf b fffff e ntoskrnl exe ntoskrnl exe cc NT Kernel amp System Microsoft Windows Operating System Microsoft Corporation win sp gdr - x ntoskrnl exe cc C Windows MiniDump - - dmp Specs Windows x i K ghz min temp c and max temp c Gb Corsair Vengeance x Gb NVidea GTX Gb Gigabyte Z MX UD H B Cool master w PSU Appreciate any help Thanks

A:Please help, new build BSOD

Plug your ram in one at a time a see if the blue screens go away.
It's probs bad ram, or you have overclocked the ram to far.

If none of these then, might be a driver issue, but i suspect a memory issue

http://www.techsupportforum.com/forums/f299/please-help-new-build-bsod-622368.html
Relevancy 39.99%

Hi Everyone,

Can anyone help? I expect it maybe driver related.

Thank you in advance

A:New Build BSOD

Sorry for the delay in responding. There just aren't that many people who do BSOD analysis, so at times we get a bit overwhelmed!
Also, with the debut of Win10, we are extremely busy with it.

Do your still need help with this problem?
I will be notified if you reply to this topic and will respond within 48 hours.

http://www.eightforums.com/bsod-crashes-debugging/54605-new-build-bsod.html
Relevancy 39.99%

Hi Everyone.

Just put together a new HTPC for a friend of mine. Here are the specs:

AMD Athlon II X3 440
Gigabyte GA-880GM-USB3 (rev. 1.0)
Geil 4gb Value 1600
WD 1TB Green
Gigabyte Ati 5570 1gb

The windows is windows 7 ultimate x64 (retail).

The rig is brand new, did a clean install and after around 10 mins, while trying to install microsoft office, the BSOD appeared. i had earlier done a clean format because the bsod kept appearing when installing certain software, or running programs like autocad or photoshop. Would appreciate any input, thank you!!

Relevancy 39.99%

I finished my new build and keep getting random bsod's about every day now. My specs are Intel I5 4690K - Asus Z97 Pro WiFi - Asus Strix GTX 980 - 16gb Corsair DDR3 - Samsung EVO 850 250gb SSD - Seagate 2tb HDD - Seasonic 650 Watt Gold+ PSU - Silverstone FT02 Case - Samsung 4k uhd monitor u28d590d

Any guidance is very appreciated.

http://www.techsupportforum.com/forums/f299/new-build-bsods-need-help-plz-1115130.html
Relevancy 39.99%

Hi guys,

Running on Windows 7 x64 Ultimate, retail with a fresh build, please see attachment for bsod info, and i've posted a short version here. Please help in anyway you can!

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1033

Additional information about the problem:
BCCode: 124
BCP1: 0000000000000000
BCP2: FFFFFA8009872028
BCP3: 00000000BE200000
BCP4: 000000000005110A
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\033112-2620-01.dmp
C:\Users\MyComp\AppData\Local\Temp\WER-12183-0.sysdata.xml

Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

A:BSOD - New Build

Stop 0x124 is a hardware error.... if you are overclocking try resetting your processor to standard settings and see if that helps ... if you continue to get BSOD here are some more things you may want to consider ..





Quote:
Stop 0x124 - what it means and what to try
Synopsis:

A "stop 0x124" is fundamentally different to many other types of bluescreens because it stems from a hardware complaint. Stop 0x124 minidumps contain very little practical information, and it is therefore necessary to approach the problem as a case of hardware in an unknown state of distress.
Generic "Stop 0x124" Troubleshooting Strategy:
1) Ensure that none of the hardware components are overclocked. Hardware that is driven beyond its design specifications - by overclocking - can malfunction in unpredictable ways.

2) Ensure that the machine is adequately cooled. If there is any doubt, open up the side of the PC case (be mindful of any relevant warranty conditions!) and point a mains fan squarely at the motherboard. That will rule out most (lack of) cooling issues.

3) Update all hardware-related drivers: video, sound, RAID (if any), NIC... anything that interacts with a piece of hardware. It is good practice to run the latest drivers anyway.

4) Update the motherboard BIOS according to the manufacturer's instructions. Their website should provide detailed instructions as to the brand and model-specific procedure.

5) Rarely, bugs in the OS may cause "false positive" 0x124 events where the hardware wasn't complaining but Windows thought otherwise (because of the bug). At the time of writing, Windows 7 is not known to suffer from any such defects, but it is nevertheless important to always keep Windows itself updated.

6) Attempt to (stress) test those hardware components which can be put through their paces artificially. The most obvious examples are the RAM and HDD(s). For the RAM, use the in-built memory diagnostics (run MDSCHED) or the 3rd-party memtest86 utility to run many hours worth of testing. For hard drives, check whether CHKDSK /R finds any problems on the drive(s), notably "bad sectors". Unreliable RAM, in particular, is deadly as far as software is concerned, and anything other than a 100% clear memory test result is cause for concern. Unfortunately, even a 100% clear result from the diagnostics utilities does not guarantee that the RAM is free from defects - only that none were encountered during the test passes.

7) As the last of the non-invasive troubleshooting steps, perform a "vanilla" reinstallation of Windows: just the OS itself without any additional applications, games, utilities, updates, or new drivers - NOTHING AT ALL that is not sourced from the Windows 7 disc. Should that fail to mitigate the 0x124 problem, jump to the next steps. Otherwise, if you run the "vanilla" installation long enough to convince yourself that not a single 0x124 crash has occurred, start installing updates and applications slowly, always pausing between successive additions long enough to get a feel for whether the machine is still free from 0x124 crashes. Should the crashing resume, obviously the very last software addition(s) may be somehow linked to the root cause.
If stop 0x124 errors persist despite the steps above, and the harware is under warranty, consider returning it and requesting a replacement which does not suffer periodic MCE events. Be aware that attempting the subsequent harware troubleshooting steps may, in some cases, void your warranty:
8) Clean and carefully remove any dust from the inside of the machine. Reseat all connectors and memory modules. Use a can of compressed air to clean out the RAM DIMM sockets as much as possible.

9) If all else fails, start removing items of hardware one-by-one in the hope that the culprit is something non-essential which can be removed. Obviously, this type of testing is a lot easier if you've got access to equivale... Read more

http://www.sevenforums.com/bsod-help-support/222157-bsod-new-build.html
Relevancy 39.99%

BSODs are starting to become regular. Please help me. I dont know what is wrong with my pc. I tried the memory test. All passed. Also tried HDTune for my SSD Samsung, still good. While playing the game League of Legends, it crashed with a long beep, then restarted. Attached are my minidumps, which I dont know how to open using Windows Diagnostic. I am using BLUESCREENVIEW. Even so, I dont understand it... Oh, the second or third crash, I was not playing. I was doing nothing. I am not sure, but I think the said game was on. I was just on login screen.
Thanks!

A:BSOD on my build

It appears you are experiencing the pre-SP1 bug. Updating to SP1 should fix the problem

Learn how to install Windows 7 Service Pack 1 (SP1)

BSOD BUGCHECK SUMMARY

Code:

Built by: 7600.16841.amd64fre.win7_gdr.110622-1503
Debug session time: Fri Aug 19 01:46:22.010 2011 (UTC - 4:00)
System Uptime: 0 days 0:28:44.306
Probably caused by : ntkrnlmp.exe ( nt!KiDoubleFaultAbort+b2 )
BUGCHECK_STR: 0x7f_8
PROCESS_NAME: System
FAILURE_BUCKET_ID: X64_0x7f_8_nt!KiDoubleFaultAbort+b2
BiosReleaseDate = 02/18/2011
SystemManufacturer = To Be Filled By O.E.M.
SystemProductName = To Be Filled By O.E.M.
CPUID: "Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz"
MaxSpeed: 3300
CurrentSpeed: 3292
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7600.16841.amd64fre.win7_gdr.110622-1503
Debug session time: Sat Aug 13 02:08:32.780 2011 (UTC - 4:00)
System Uptime: 0 days 0:22:43.076
Probably caused by : ntkrnlmp.exe ( nt!KiDoubleFaultAbort+b2 )
BUGCHECK_STR: 0x7f_8
PROCESS_NAME: System
FAILURE_BUCKET_ID: X64_0x7f_8_nt!KiDoubleFaultAbort+b2
BiosReleaseDate = 02/18/2011
SystemManufacturer = To Be Filled By O.E.M.
SystemProductName = To Be Filled By O.E.M.
CPUID: "Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz"
MaxSpeed: 3300
CurrentSpeed: 3292
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Debug session time: Sun Aug 7 03:11:40.846 2011 (UTC - 4:00)
System Uptime: 0 days 1:26:19.142
Probably caused by : NETIO.SYS ( NETIO!CompareSecurityContexts+6a )
BUGCHECK_STR: 0x7f_8
PROCESS_NAME: System
FAILURE_BUCKET_ID: X64_0x7f_8_NETIO!CompareSecurityContexts+6a
BiosReleaseDate = 02/18/2011
SystemManufacturer = To Be Filled By O.E.M.
SystemProductName = To Be Filled By O.E.M.
CPUID: "Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz"
MaxSpeed: 3300
CurrentSpeed: 3292
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Debug session time: Mon Jul 18 23:40:12.278 2011 (UTC - 4:00)
System Uptime: 0 days 2:36:17.199
Probably caused by : ntkrnlmp.exe ( nt!KiDoubleFaultAbort+b2 )
BUGCHECK_STR: 0x7f_8
PROCESS_NAME: System
FAILURE_BUCKET_ID: X64_0x7f_8_nt!KiDoubleFaultAbort+b2
BiosReleaseDate = 02/18/2011
SystemManufacturer = To Be Filled By O.E.M.
SystemProductName = To Be Filled By O.E.M.
CPUID: "Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz"
MaxSpeed: 3300
CurrentSpeed: 3292
??????????????????????????????????????????????????????????????????????????????????????``

http://www.sevenforums.com/bsod-help-support/181799-bsod-my-build.html
Relevancy 39.99%

Blue screen says device driver trying to corrupt windows. All help would be appreciated.

Thanks, Ken

A:Help with bsod's on new build!

NOT driver verified by related to your ESET. There has been an increase in crashes with the older ESET products of late. I suspect an update.

I would remove and replace ESET with Microsoft Security Essentials (at least to test)
http://download.eset.com/special/ESETUninstaller.exe

Microsoft Security Essentials - Free Antivirus for Windows

http://www.sevenforums.com/bsod-help-support/223260-help-bsods-new-build.html
Relevancy 39.99%

Hi, ive had a few BSOD and have no idea what is the problem specs are as follows


? OS - Windows 7
? x64
? Brand new, couple 2nd hand components
? 4670k
? MSI 750 ti
? MSI z87i
? Seasonic platinum 760 xps2



Please help, files attached. THank you!

A:BSOD Win 7 X64 New Build

ok looks like its the memory, ran memtest and within a very short space of time there was already over 43k errors

http://www.techsupportforum.com/forums/f299/bsod-win-7-x64-new-build-857825.html
Relevancy 39.99%

Hi first post on these forums which I just discovered thanks to BSOD. Build New PC our friends at google I've recently had a new computer build CPU Intel i Gigabyte GA-X A-UD R MB GB G-Skill NQ RAM GB New PC Build BSOD. ASUS GPU Lancool K Corsair HX- PSU GSKILL Falcon GB boot drive Samsung Spinpoint TB Sony DVD Samsung P The build was completed last weekend and has been running fine up until yesterday when it was turned on for the first time on several days As background I did have one stick of RAM which seemed a little suss in that it wasnt detected initially - removed and reseated and it seemed to be fine until yesterday After several minutes or so - New PC Build BSOD. I got a BSOD this continued for several reboots with no change - BSOD kicking in after minutes or thereabouts finally - I removed the suspect ram and downloaded memtest created a bootable CD and ran it This ran with no errors while running for about an hour with the suspect ram reinserted So rebooted machine into windows and it ran fine for several hours last night in which I ran dMark Vantage and PC Mark Vantage to get some benchmark results CPU cores all seened to be under degress and GPU running at about degress - Im NOT overclocking Anyway - left it for the night and waited until this morning to fire it up again tp repeat the benchmarking - however it felll over running D Mark and then again afterwards I have attached minidump and associated XML below as I'm unsure of the next step to diagnosing the problem I hope the amalgamated wiseness of this forum can point me in the right direction FYI - upon restarting dMark gave me the following error std exception Invalid Index available

A:New PC Build BSOD.

  
Quote: Originally Posted by mmattner


Hi,

first post on these forums which I just discovered thanks to our friends at google.

I've recently had a new computer build: CPU: Intel i7 930, Gigabyte GA-X58A-UD3R MB, 6 GB G-Skill NQ RAM, 1GB ASUS 5870 GPU, Lancool K62, Corsair HX-650 PSU, GSKILL Falcon2 64GB boot drive, Samsung Spinpoint 1TB, Sony DVD, Samsung P2350

The build was completed last weekend and has been running fine, up until yesterday when it was turned on for the first time on several days. As background I did have one stick of RAM which seemed a little suss in that it wasnt detected initially - removed and reseated and it seemed to be fine... until yesterday.

After several minutes (5 or so) - I got a BSOD ... this continued for several reboots with no change - BSOD kicking in after 5 minutes or thereabouts.

finally - I removed the suspect ram and downloaded memtest, created a bootable CD and ran it. This ran with no errors while running for about an hour.. (with the suspect ram reinserted). So rebooted machine into windows and it ran fine for several hours last night in which I ran 3dMark Vantage and PC Mark Vantage to get some benchmark results. CPU cores all seened to be under 40 degress, and GPU running at about 45 degress - Im NOT overclocking.

Anyway - left it for the night, and waited until this morning to fire it up again tp repeat the benchmarking - however it felll over running 3D Mark and then again afterwards. I have attached minidump and associated XML below, as I'm unsure of the next step to diagnosing the problem.

I hope the amalgamated wiseness of this forum can point me in the right direction.



FYI - upon restarting 3dMark gave me the following error:

std: exception
Invalid Index 5260 (5232 available)


these were caused by several problems. One (stdriver64.sys) I googled and found no reference to it at all. I wonder if it is a raid driver, or maybe a virus.

I would run a system file check to verify and repair you OS files. (type cmd in search>right click and run as admin>sfc /scannow)

If you are overclocking stop.
If you are running a raid, update its driver.
If you dont have a current working anti virus app get one and run it.
Let us know if you need help

http://www.sevenforums.com/bsod-help-support/80945-new-pc-build-bsod.html
Relevancy 39.99%

Hello and thanks for taking the time to view my post I am currently experiencing random BSOD's I just built build, new help! BSOD's, need my BSOD's, new build, need help! system last weekend and it's pretty kick a when it's not crashing I posted on these forums a BSOD's, new build, need help! couple days ago and Cybercore helped me out I took his advise and it seemed to had fixed the problems I was experiencing Now I am having some of the same issues I recently did a fresh install of windows pro bit re-formatting my ssd Every driver is up to date chipset video card etc and I have the latest Bios posted Tonight while plying Crysis everything maxed out I was having a great ol' time until about - mins in I got the BSOD My computer re-started I chose to start windows normally and it BSOD' again on windows startup It did this several times and on like the th time I got in and went straight here to hopefully get some help Attached are my crash logs I would really like to try and get these issues solved I appreciate any advise and help that is given Thanks in advance -Chris

A:BSOD's, new build, need help!

The .dmp files are evenly split between ntkrnlmp.exe (which is a core Windows file and not likely to cause a BSOD) and e1q62x64.sys which is part of your Intel based Ethernet Adapter..
Update it here...

Intel? Driver Update Utility
http://downloadcenter.intel.com/


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck D1, {9, 2, 0, fffff8800167d616}

Unable to load image \SystemRoot\system32\DRIVERS\e1q62x64.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for e1q62x64.sys
*** ERROR: Module load completed but symbols could not be loaded for e1q62x64.sys
Probably caused by : e1q62x64.sys ( e1q62x64+21219 )

Followup: MachineOwner
---------

*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck D1, {0, 2, 8, 0}

Probably caused by : ntkrnlmp.exe ( nt!KiPageFault+260 )

Followup: MachineOwner
---------
....
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck A, {fffff8000b05b644, f, 0, fffff80002e740a9}

Probably caused by : ntkrnlmp.exe ( nt!EtwpAllocateFreeBuffers+1c1 )

Followup: MachineOwner
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck D1, {9, 2, 0, fffff8800167a616}

Unable to load image \SystemRoot\system32\DRIVERS\e1q62x64.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for e1q62x64.sys
*** ERROR: Module load completed but symbols could not be loaded for e1q62x64.sys
Probably caused by : e1q62x64.sys ( e1q62x64+239e9 )

*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck D1, {a0, 2, 0, fffff88011e1b867}

Unable to load image \SystemRoot\system32\DRIVERS\e1q62x64.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for
*** ERROR: Module load completed but symbols could not be loaded for e1q62x64.sys

*******************************************************************************
* *
* Bugcheck Analysis *
* ... Read more

http://www.sevenforums.com/bsod-help-support/117397-bsods-new-build-need-help.html
Relevancy 39.99%

I have been experiencing repeated BSOD crashes on my new build It happens at varying times and functions Most times they happen when it hasn't been on long Here is the error details from the last crashed The second one happened while attempting to install the ATI new build my BSOD on updated driver st one Problem signature Problem Event Name BlueScreen OS Version Locale ID Additional information about the problem BCCode BCP BCP FFFFFA D F BCP BCP OS Version Service Pack Product Files that help describe the problem C Windows Minidump - - dmp C BSOD on my new build Users Ruth AppData Local Temp WER- - sysdata xml Read our privacy statement online Windows Privacy Statement - Microsoft Windows If the online privacy BSOD on my new build statement is not available please read our privacy statement offline C Windows system en-US erofflps txt nd one Problem signature Problem BSOD on my new build Event Name BlueScreen OS Version Locale ID Additional information about the problem BCCode a BCP FFFFF A BCP BCP BCP FFFFF CDDE OS Version Service Pack Product Files that help describe the problem C Windows Minidump - - dmp C Users Ruth AppData Local Temp WER- - sysdata xml Read our privacy statement online Windows Privacy Statement - Microsoft Windows If the online privacy statement is not available please read our privacy statement offline C Windows system en-US erofflps txt As I am posting this the system seems to be more stable I was able to finally install the ATI driver update by using another PC and downloading it to a flash drive Maybe this has solved the problem I'm not sure since I really don't know haw to quot read quot the error codes

A:BSOD on my new build

You could attach your minidump file for one of our Guru Team Members to look at.

http://www.sevenforums.com/crash-loc...tml#post351429

http://www.sevenforums.com/bsod-help-support/78429-bsod-my-new-build.html
Relevancy 39.99%

This issue goes back to a new build and my previous OS of Windows 7. I thought I had it narrowed down to the video card driver but now I am less sure. I have been using Windows 10 Pro 64 just about since it was released and the problem persists. My drivers are updated, I don't have a whole lot of programs installed on this computer but it's my home theater computer and I really need it to stay running all the time. The last couple of crashes after my most recent driver update were driver power state failures then as I was going to try driver verifier again it crashed when I was restarting with an irq not less or equal. dmp files are attached.

A:BSOD since new build

Please read BSOD Posting Instructions

http://www.tenforums.com/bsod-crashes-debugging/32827-bsod-since-new-build.html
Relevancy 39.99%

I have recently, this weekend, built a new computer using fairly standard parts. The system is periodically giving me the BSOD. I have followed your instructions for how to troubleshoot. Thanks in advance for any help.

Here are the system components I am using:

These are the new items:
Intel i5 650
4 GB of OCZ DDR3
Gigabyte MB H55-USB3
Seagate Barracuda 1TB

Using these as "legacy" but not very old
ASUS G100 Video card
OCZ 650w PS

I have attached the requested documents, note as requested the .html file is in the .zip.

I did just swap the memory but would like your thoughts on if something else is happening.


Thanks!

A:BSOD on New Build

  
Quote: Originally Posted by sruschill


I have recently, this weekend, built a new computer using fairly standard parts. The system is periodically giving me the BSOD. I have followed your instructions for how to troubleshoot. Thanks in advance for any help.

Here are the system components I am using:

These are the new items:
Intel i5 650
4 GB of OCZ DDR3
Gigabyte MB H55-USB3
Seagate Barracuda 1TB

Using these as "legacy" but not very old
ASUS G100 Video card
OCZ 650w PS

I have attached the requested documents, note as requested the .html file is in the .zip.

I did just swap the memory but would like your thoughts on if something else is happening.


Thanks!



Hi and welcome

These were caused by a few things. First Norton (ccHPx64.sys). Then two year old drivers

First remove Norton and replace with Microsoft Security Essentials.
Download and run the Norton Removal Tool to uninstall your Norton product | Norton Support

http://www.microsoft.com/security_essentials

Then Update the below drivers
How To Find Drivers:




Quote:
- search Google for the name of the driver
- compare the Google results with what's installed on your system to figure out which device/program it belongs to
- visit the web site of the manufacturer of the hardware/program to get the latest drivers (DON'T use Windows Update or the Update driver function of Device Manager).
- if there are difficulties in locating them, post back with questions and someone will try and help you locate the appropriate program.


- - The most common drivers are listed on this page: Driver Reference
- - Driver manufacturer links are on this page: Drivers and Downloads
Let us know if you need hep.


Code:

Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\K\Desktop\Windows_NT6_BSOD_jcgriff2\100910-15506-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*C:\symbols;*http://msdl.microsoft.com/download/symbols/;srv*e:\symbols
*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Machine Name:
Kernel base = 0xfffff800`02a52000 PsLoadedModuleList = 0xfffff800`02c8fe50
Debug session time: Sat Oct 9 19:01:54.186 2010 (GMT-4)
System Uptime: 0 days 0:08:35.341
Loading Kernel Symbols
...............................................................
................................................................
..............................
Loading User Symbols
Loading unloaded module list
...
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 19, {20, fffffa800386a800, fffffa800386a850, 4050006}

Unable to load image \SystemRoot\system32\drivers\NISx64\1106000.020\ccHPx64.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ccHPx64.sys
*** ERROR: Module load completed but symbols could not be loaded for ccHPx64.sys
Probably caused by : ccHPx64.sys ( ccHPx64+7d08 )

Followup: MachineOwner
---------

2: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
**************... Read more

http://www.sevenforums.com/bsod-help-support/117114-bsod-new-build.html
Relevancy 39.99%

Hi there, I have been trying to work through this problem with another forum but have so far not had much luck. So I want to start afresh with a new team.

I built my own PC
Intel Core i7 870 Lynnfield 2.93GHz 8MB
ASUS P7P55D-E LX DDR3 LGA1156 SATA3+USB3 ATX
OCZ Intel Extreme Series 2x2GB DDR3-1600 CL8
Prolimatech MegahalemsCooler
Samsung Spinpoint F3 1TB 32MB 7200rpm SATAII
EVGA nVidia GeForce GTS450 1GB GDDR5 PCI-E
Silverstone Strider Essential ST50F-ES 500W PSU
AOC IF23 IPS 16:9 Full HD Monitor
Windows 7 OEM Home Premium 64Bit

And occasionaly it crashes, this past time it would BSOD as soon as I opened IE and the BSOD message was "APC INDEX MISMATCH"

I removed 1 stick of ram and now it is running OK.

Please help!

Jason

A:New Build BSOD

Welcome to SF.

Probably caused by : aswMonFlt.sys ( aswMonFlt+1135 )

Try uninstalling Avast.

http://www.sevenforums.com/bsod-help-support/135341-new-build-bsod.html
Relevancy 39.99%

My new computer ran fine the first day but the next morning I started getting the dreaded BSOD. Sometimes when I try to boot the monitor can't detect a signal and my mobo beeps. I checked the manual and the long continuous beeps mean that my graphics card isn't inserted properly so I reinstalled the graphics card but the problem persists. Any help would be appreciated.

A:BSOD On A New PC Build

You uploaded a system dump from January 4th 2010

http://www.sevenforums.com/bsod-help-support/150568-bsod-new-pc-build.html
Relevancy 39.99%

Hi All I built a new PC a couple of days ago OS Windows Home Premium bit I now know I have to upgrade this to utilize Gb RAM CPU i - X Extreme Edition MOBO ASUS P X D-E RAM Corsair XMS x Gb CMX GX M A C VID Gigabyte GTX HD Crucial RealSSD Gb x New BSOD PC Build GB RAID Intel Raid Controller PSU Watt AV AVG after reading the forums I removed this after the Last BSOD I had a couple of BSOD on the first night MEMORY New Build PC BSOD MANAGEMENT I did not have small dump files set up so I can not attach them I updated the drivers from the ASUS website This did add a level of stability Since then I have had a couple of issues with World of Warcraft having critical errors This was followed by a BSOD quot PAGE FAULT NOT IN quot something quot I could not get memtest to run as ISORecorder will not install correctly on my system Any suggestions on this When I right click on an ISO file it doesn't have the drop down menu to write to CD I did download the bit version I have attached the dump files form last night Thanks in advance - Stew

A:New Build PC BSOD

  
Quote: Originally Posted by Akumastew


Hi All

I built a new PC a couple of days ago.

OS: Windows Home Premium 64 bit (I now know I have to upgrade this to utilize 24Gb RAM)
CPU: i7-980X Extreme Edition
MOBO: ASUS P6X58D-E
RAM: Corsair XMS (6x4Gb) CMX4GX3M1A1333C9
VID: Gigabyte GTX480
HD: Crucial RealSSD 128Gb (2x128GB) RAID 0. Intel Raid Controller
PSU: 1100 Watt
AV: AVG (after reading the forums, I removed this after the Last BSOD)

I had a couple of BSOD on the first night. MEMORY_MANAGEMENT. I did not have small dump files set up, so I can not attach them.

I updated the drivers from the ASUS website. This did add a level of stability.

Since then I have had a couple of issues with World of Warcraft having critical errors.

This was followed by a BSOD "PAGE_FAULT_NOT_IN_"something".

I could not get memtest86 to run as ISORecorder will not install correctly on my system. (Any suggestions on this?) When I right click on an ISO file it doesn't have the drop down menu to write to CD. I did download the 64bit version.

I have attached the dump files form last night.

Thanks in advance.

- Stew


If you cant load memtest on dvd then try a usb satick.

These two refer to your AVG. I would remove it and replace it with Microsoft Security Essentials.

http://www.microsoft.com/security_essentials/

http://www.sevenforums.com/bsod-help-support/119879-new-build-pc-bsod.html
Relevancy 39.99%

I just built a new PC- Installed Win 2000- went to install xp- and I get the error: BSOD

Stop:0x0000007E (0xC0000005, OxF748E0BF, 0xF78DA208, 0xF78D9F08)

pci.sys- Address F748E0BF base at F7487000, datestamp 3b7d855c
It runs Win 2000 perfectly- when I start to upgrade to XP- it starts to install- reboots- and this is what I get. I figure it is hardware- but what? I can give specs on my build if necessary-

PLEASE HELP-
Thx
 

A:BSOD on New build HELP

Please do not create multiple threads for the same problem.
Continue here: http://forums.techguy.org/hardware/776489-bsod-new-build-help.html
 

https://forums.techguy.org/threads/bsod-on-new-build-help.776488/
Relevancy 39.99%

I just installed windows XP on a new build. And I got a BSOD in 30 minutes. :(
That is all. I'll let you know if the problem happens again, but what shall I do to avoid another one?

EDIT: Now it just froze after I posted the thread. (I think I'm a failure with building now.)

SECOND EDIT: It froze again! :( [This time it was after about 15-30 minutes.]

A:Bsod on new build?

give us your complete system specs including the power supply and video card.

http://www.techsupportforum.com/forums/f10/bsod-on-new-build-410111.html
Relevancy 39.99%

Hi all I really hope someone can help me This is my first custom build I loaded everything correctly or so I thought Put it together last weekend and since then I've had BSOD happen during light web surfing and numerous crashes but NOT BSOD during gaming I feel if I can new anyone build my Getting on help? BSOD can fix the BSOD the crashes during gaming should stop I don't know but I'm hoping someone can help me out with the BSODs Build Cpu - AMD FX- Vishera GHz GHz Turbo Socket AM W Six-Core Desktop Processor FD WMHKBOX water Getting BSOD on my new build can anyone help? cooled by corsair h Gpu Getting BSOD on my new build can anyone help? - SAPPHIRE - L Radeon HD GB -bit GDDR PCI Express x HDCP Ready CrossFireX Support Video Card Mobo - ASUS M A LE R AM AMD SATA Gb s USB ATX AMD Motherboard with UEFI BIOS Memory- G SKILL Ripjaws Series GB x GB -Pin DDR SDRAM DDR PC Desktop Memory Model F - CL D- GBRL Psu - Getting BSOD on my new build can anyone help? CORSAIR Enthusiast Series TX V W ATX V v EPS V v PLUS BRONZE Certified Active PFC High Performance Power Supply

A:Getting BSOD on my new build can anyone help?

Hi Jerel

Looking at your BSOD dmp files

Causes :
atikmdag.sys - Graphic Card driver
iexplorer.exe - Internet Explorer
dxgmms1.sys - DirectX
X64_IP_MISALIGNED_AE1200w764.sys - Network Driver

When you Installed Windows did you use the Disc that came with the Motherboard? Or did you download the drivers off the Asus website ?

Asus Website : ASUSTeK Computer Inc. -Support- Drivers and Download M5A97 LE R2.0

NIC Driver : Realtek

Choose : Win7 and WinServer 2008 R2 Driver7.0692013/3/26839k
Question : Are you using a external network card ? Or you using the Ethernet ports on the motherboard? NeverMind

AE1200 Adapter Driver : http://downloads.linksys.com/downloa...in7_WHQL,0.zip
Firmware Update 070H : SSD drive



   Note
If you have this firmware than you don't need it


How To

Asmedia USB 3.0 Driver

http://www.sevenforums.com/bsod-help-support/285762-getting-bsod-my-new-build-can-anyone-help.html
Relevancy 39.99%

I'm having problems with my pc, as when I try and boot windows 8.1 from a usb onto the pc it recognizes windows and gos into the BSOD, with the error code 0xc000000f.
This is a new build and everything works

Gigabyte GA-970A-D3P ATX AM3+/AM3 Motherboard
AMD FX-6300 3.5GHz 6-Core Processor
G.Skill Ripjaws X Series 8GB (2 x 4GB) DDR3-1600 Memory
Gigabyte GeForce GTX 960 2GB Video Card
Cooler Master 450W 80+ Gold Certified Semi-Modular ATX Power Supply

A:BSOD On New PC Build

Are you trying to boot Windows from a USB drive or Install Windows from a USB drive?

http://www.techsupportforum.com/forums/f299/bsod-on-new-pc-build-1020002.html
Relevancy 39.99%

Hey guys,

I recently built my first computer, and although the hardware install went smoothly, im not the best when it come to debugging errors like this. My system is running ok but there are reoccurring BSoDs that are happening. In addition my system seem a little slow for the hardware, and some programs aren't opening properly.

I followed the steps to get the necessary reports and i will post them in here.

I appreciate any help you guys can give.

Chris


Windows 7 64bit
Full retail install
all new hardware and software assembled mid January.

Specs:
AMD Phenom II x6 1100T
16 GB G.Skill RAM DDR 3 1337 Ghz (4gb x4)
Gygabyte GA 890GPA UD3H Motheboard
Gygabyte 5870 radeon
750W cosair PSU

A:BSoD on my new build

bsods usually indicate a hardware conflict/failure or driver issue. I would first make sure that all your drivers for your hardware devices are the up to date ones from the manufacturer's website. The top line of the bsod usually indicates what the issue is. I usually google that and find the problem. Common problems for me have been ram and driver issues. If you have a faulty memory stick, you can run/ download memtest, and they will have you create a bootable cd that will test your memory. You can download it from Memtest86+ - Advanced Memory Diagnostic Tool.

If that doesn't help, try and catch what the bsod says on the top line and post it on here.

Hope that helps.

http://www.techsupportforum.com/forums/f299/bsod-on-my-new-build-546526.html
Relevancy 39.99%

Hello all I am fairly experienced at building computers but after building this latest one have been having unending difficulties with it I keep getting a memory dump blue screen of death I've noticed that it seems to only happen when I'm surfing the web whether it be Chrome or Firefox It crashes in minutes under these circumstances but I was using Microsoft word this morning for about an hour and played multiple video games last BSOD on new build night for over two hours without any crash I ran driver verifier and have attached the file generated by the system file collection app I BSOD on new build couldn't generate a system health report while in safe mode but can probably get that too if asked Memtest showed I had a bad RAM DIMM when I BSOD on new build first built the computer but I have since replaced it an ran memtest overnight with no errors I have ran seabreeze diagnostic tools on my hard drive and most recently wiped my hard drive In addition the CPU and RAM survive multiple burn-in tests and the GPU survives dmark fine I've now been running in safe mode for about an hour and it nevers seems to crash in safe mode I am really stumped here and am worried its a bad motherboard I appreciate any input Thanks Ben

A:BSOD on new build

Hi, Ben; and welcome to the forum. Sorry you are having trouble with your new build.

To start your troubleshooting, I recommend that you uninstall Zone Alarm using this uninstall tool: http://download.zonealarm.com/bin/fr...cpes_clean.exe. ZA is nearly a guaranteed cause of BSOD's on some Win 7 systems. Make sure that Windows Firewall is turned on. Don't use a third party firewall while you are troubleshooting.

Your Driver Verified enabled dump directly blames ISWKL.sys which is a ZoneAlarm ForceField driver.

Code:
Windows 7 Kernel Version 7600 MP (6 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Machine Name:
Kernel base = 0xfffff800`0285e000 PsLoadedModuleList = 0xfffff800`02a9be50
Debug session time: Wed Oct 27 15:29:25.108 2010 (GMT-4)
System Uptime: 0 days 0:01:47.466
Loading Kernel Symbols
...............................................................
................................................................
..........
Loading User Symbols
Loading unloaded module list
....
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck C4, {f6, 544, fffffa80070e2970, fffff88003a22d78}

Unable to load image \??\C:\Program Files\CheckPoint\ZAForceField\ISWKL.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ISWKL.sys
*** ERROR: Module load completed but symbols could not be loaded for ISWKL.sys
Probably caused by : ISWKL.sys ( ISWKL+1d78 )

Followup: MachineOwner
---------

1: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

DRIVER_VERIFIER_DETECTED_VIOLATION (c4)
A device driver attempting to corrupt the system has been caught. This is
because the driver was specified in the registry as being suspect (by the
administrator) and the kernel has enabled substantial checking of this driver.
If the driver attempts to corrupt the system, bugchecks 0xC4, 0xC1 and 0xA will
be among the most commonly seen crashes.
Arguments:
Arg1: 00000000000000f6, Referencing user handle as KernelMode.
Arg2: 0000000000000544, Handle value being referenced.
Arg3: fffffa80070e2970, Address of the current process.
Arg4: fffff88003a22d78, Address inside the driver that is performing the incorrect reference.

Debugging Details:
------------------
BUGCHECK_STR: 0xc4_f6

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VERIFIER_ENABLED_VISTA_MINIDUMP

PROCESS_NAME: ForceField.exe

CURRENT_IRQL: 0

LAST_CONTROL_TRANSFER: from fffff80002d593dc to fffff800028cff00

STACK_TEXT:
fffff880`095ecfe8 fffff800`02d593dc : 00000000`000000c4 00000000`000000f6 00000000`00000544 fffffa80`070e2970 : nt!KeBugCheckEx
fffff880`095ecff0 fffff800`02d6eae4 : 00000000`00000544 fffffa80`070e2970 00000000`00000004 fffff800`02b03918 : nt!VerifierBugCheckIfAppropriate+0x3c
fffff880`095ed030 fffff800`02b2a720 : ffff0800`00000000 fffff880`095ed238 fffff880`095ed700 00000000`00000030 : nt!VfCheckUserHandle+0x1b4
fffff880`095ed110 fffff800`02bdf350 : fffff880`095ed700 fffffa80`00001000 fffffa80`03989bc0 00000000`00000000 : nt! ?? ::NNGAKEGL::`string'+0x2105e
fffff880`095ed1e0 fffff800`028cf153 : 00000000`00000544 00000000`6448624f fffff880`095ed8e0 00000000`00000030 : nt!NtQueryInformationProcess+0x37f
fffff88... Read more

http://www.sevenforums.com/bsod-help-support/120865-bsod-new-build.html
Relevancy 39.99%

Hi everyone. I just built this computer 3 or 4 days ago and I've been experiencing a lot of BSOD (twice an hour or so) since then. I can't play a game without getting freezes that result in windows restart. Doing lower memory usage tasks like browsing facebook relates my google chrome to crash which never happened in the earlier pc I had. I installed new windows but no joy, thought I'm getting less BSOD but nope.

I've got the minidump as well as .txt that contains Instant Online Crash Analysis, brought by OSR Open Systems Resources, Inc. for my minidump that was created an hour earlier or so.

###worth to mention that I used to have a lot of problems with my RAMs (having to remove them to let it startup proberly isntead of having no display on my screen etc) but now, I only have this BSOD and Freeze to Restart problem and nothing else. Thank you in advance.

http://www.sevenforums.com/bsod-help-support/389691-bsod-after-new-build.html
Relevancy 39.99%

Hello Everyone!

I recently built my new computer about a month ago and about a couple of days ago, I started getting blue screens. My specs are:

i5 2500k
GTX560 Ti
4GB DDR3 2133MHz
XFX 650w PSU
Gigabyte GAZ68A-D3H-B3
1 TB HDD - Samsung
Windows 7 Ultimate x64

I usually get these blue screens when I just leave my computer on and when I come back, it sometimes is sitting there with a blue screen. I have attached the dumps and any help will be appreciated!

If you need anything else, please let me know.

Thanks.

A:BSoD's with new build! Please Help.

Anyone want to help?

http://www.sevenforums.com/bsod-help-support/177755-bsods-new-build-please-help.html
Relevancy 39.99%

Hello all! I'm new to the forums but I've lurked here a bit in the past few days looking for an answer to my BSOD prob. It seems random, I can't really reproduce the problem. All hardware is brand new minus the optical drive. For anti virus im using avast and spybot.

Thanks in advance for any and all help...

- 64bit Windows7 Home Prem
- Installed on a Clean Harddrive
- OEM Version
- Self Built Computer
- System is about 10 days old.
- OS installation is also 10 days old.

system is:

amd phenom II x6
ASUS mobo - m4a89gtd pro/usb3
nvidia geforce GTS 450
8gb ram
300gb WD Raptor hdd

A:New build BSOD

Hello Astro, Welcome to Sevenforums!

I noticed on one of your latest crashes you where playing Starcraft 2 Nice!!

Thus far your Dumps are pointing to MEMORY_CORRUPTION and MEMORY_MANAGEMENT which could be a bad driver, However i think you may have a bad stick of ram. Your drivers are all july 13th 2009 Or newer

SO i would like to start by running a memtest86+ This could take 6 to 8 hours making 7 passes. RAM - Test with Memtest86+

Post Back with results, and we will go from there.

- Tony

http://www.sevenforums.com/bsod-help-support/136695-new-build-bsod.html
Relevancy 39.99%

I keep getting bsod on new build computer -

windows 7 home premium full retail version

AMDF a10 7800
asus a88x-pro
coolmaster g550m

Attahced is the sysnative zipped file but I could not perfmon /report to come up in the search box?

Thanks in advance

Andrew

A:new build bsod

Attached is also latest mini dump.

http://www.techsupportforum.com/forums/f299/new-build-bsod-900138.html
Relevancy 39.99%

OS - Vista Windows -- gt Windows x -bit or x -- gt x What was original installed OS on system Build, BSOD getting New -- gt None custom built PC New Build, getting BSOD Is the OS an OEM version came pre-installed on system or full retail version YOU purchased it from retailer -- gt Retail version self-installed Age of system hardware -- gt Almost week Age of OS installation - have you re-installed the OS -- gt Almost week CPU -- gt Intel Core i - K Processor M Cache up to GHz Ivy New Build, getting BSOD Bridge Video Card -- gt EVGA GeForce GTX HD Superclocked Video Card - MB MotherBoard -- gt MSI Z A-GD Power Supply -- gt OCZ ModXStream Pro Power Supply - -Watt Modular Dual V Rails SATA Plus Case -- gt COOLER MASTER HAF RC- -KKN Black SECC ABS Plastic ATX Mid Tower Computer Case Memory -- gt Corsair Vengeance GB PC DDR RAM - MHz CMZ GX M A C Other Information Ran Memtest for passes no errors Does not appear to BSOD during gaming

A:New Build, getting BSOD

Go into bios and check what information your Mobo has put down for you CPU and post back

http://www.techsupportforum.com/forums/f299/new-build-getting-bsod-644817.html
Relevancy 39.99%

THis is a fresh install of Win 7 Pro (x64) on hardware that is less than a year old.

Im getting random BSOD since the install last night. Normally the screen will go jacked then BSOD.
Trying to figure out how to duplicate it so far no luck.

Since the install, I have only installed Mozilla, Thunderbird, and a few other small apps. Im thinking its some
type of driver issue - any help would be great!

Thanks
Rob

System Info :
OS : Windows 7 Pro x64
CPU : Intel i7 920
Motherboard : Gigabye UEX58-UD5
Memory : 12GB OCZ Platinum
Graphics Card(s) : ATI Radeon HD4890 (x2)
Monitor(s) Displays : HP 24"(x4)
Hard Drives :
2 OCZ Agility & 1 OCZ Vertex Raid 0
2 WD Raptor Raid 1
PSU : Corsair 850W

A:BSOD - New build - HELP!!!

Hi, Rob; and welcome to the forum. Your dump is BugCheck 1E and the dump blames usbuhci.sys, which a Windows system driver and very unlikely to be the real cause. What USB devices do you have plugged in?

I suggest that you download and install Microsoft Security Essentials. MSE supersedes Defender, runs very smoothly with Win 7 and offers superior protection to that of Defender. MSE will turn Defender off. It needs no action on your part.

I find two out of date drivers loaded on your system. Outdated drivers can caus econflicts, memory corruption and crashes. Update these drivers through the links provided. iaStorV.sys was involved in the crash. This does necessarily mean that it was the cause.





Quote:
iaStorV.sys Wed Apr 08 12:57:17 2009 - Intel Matrix Storage Manager driver (base). http://downloadcenter.intel.com/Default.aspx.

Rt64win7.sys Thu Feb 26 04:04:13 2009 - Realtek RTL8168D/8111D Family PCI-E Gigabit Ethernet NIC Realtek.


Update these two drivers and install MSE. Reboot and see if your system is more stable. Post back and let us know. If you get another BSOD, please upload the dump and we will go from there.

Code:
Windows 7 Kernel Version 7600 MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Machine Name:
Kernel base = 0xfffff800`02a14000 PsLoadedModuleList = 0xfffff800`02c51e50
Debug session time: Mon Jan 10 10:45:04.176 2011 (GMT-5)
System Uptime: 0 days 0:09:34.144
Loading Kernel Symbols
...............................................................
................................................................
.................
Loading User Symbols
Loading unloaded module list
...
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1E, {0, 0, 0, 0}

Probably caused by : usbuhci.sys ( usbuhci!UhciProcessDoneAsyncTd+24 )

Followup: MachineOwner
---------

0: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

KMODE_EXCEPTION_NOT_HANDLED (1e)
This is a very common bugcheck. Usually the exception address pinpoints
the driver/function that caused the problem. Always note this address
as well as the link date of the driver/image that contains this address.
Arguments:
Arg1: 0000000000000000, The exception code that was not handled
Arg2: 0000000000000000, The address that the exception occurred at
Arg3: 0000000000000000, Parameter 0 of the exception
Arg4: 0000000000000000, Parameter 1 of the exception

Debugging Details:
------------------
EXCEPTION_CODE: (Win32) 0 (0) - The operation completed successfully.

FAULTING_IP:
+529e952f017cdc20
00000000`00000000 ?? ???

EXCEPTION_PARAMETER1: 0000000000000000

EXCEPTION_PARAMETER2: 0000000000000000

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

BUGCHECK_STR: 0x1E

PROCESS_NAME: System

CURRENT_IRQL: 2

EXCEPTION_RECORD: fffff80000b9c878 -- (.exr 0xfffff80000b9c878)
ExceptionAddress: fffff8800486ef0c (usbuhci!UhciProcessDoneAsyncTd+0x0000000000000024)
ExceptionCode: c0000005 (Access violation)
ExceptionFlags: 00000000
NumberParameters: 2
Parameter[0]: 0000000000000000
Parameter[1]: ffffffffffffffff
Attempt to read from address ffff... Read more

http://www.sevenforums.com/bsod-help-support/136803-bsod-new-build-help.html
Relevancy 39.99%

Hi guys,

I'm having some problems with my new build. Whilst gaming (not under heavy loads or temps) I occasionally get freeze ups, game crashes and also BSOD's. The latest one was this morning, I've attached the dump file and that.

The specs are as follows:



Any help would be greatly appreciated. I think it might be a graphics issue but that's about it.

A:BSOD on new build.

You're right you are having trouble with a graphics driver called atikmdag.sys
http://www.sevenforums.com/crashes-d...kmdag-sys.html
Did you start with a completely fresh install?
A possibility is to rename the driver.
Another bad driver you have:http://www.sevenforums.com/crashes-d...sys-crash.html

http://www.sevenforums.com/bsod-help-support/175771-bsod-new-build.html
Relevancy 39.99%

It's Windows 7 64 bit

Brand new system (3 days)
Brand new OS

I wrote a story and included it in the files with everything I can remember doing.

I have googled and read many posts from this forum but none seemed very similar (noob)


Thanks for your time Callum0

A:BSOD - New build

Well the minidumps are pointing to a memory issue. Since you have a brand new machine this could be several things though
1 - you got a doa mem stick and it needs to be checked.
2 - your memory timings are wrong in the bios.
3 - a driver conflict I missed caused the error (all the drivers look proper and up to date though)

The first thing to do is let memtest run overnight following this guide.
See if we can smoke out a bad memory chip for you to rma
RAM - Test with Memtest86+

Checking the bios settings is a bit more involved you'll need to look up the spd info for the ram you got.


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

MEMORY_MANAGEMENT (1a)
# Any other values for parameter 1 must be individually examined.
Arguments:
Arg1: 0000000000041790, The subtype of the bugcheck.
Arg2: fffffa8000081c30
Arg3: 000000000000ffff
Arg4: 0000000000000000

Debugging Details:
------------------
BUGCHECK_STR: 0x1a_41790

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

PROCESS_NAME: svchost.exe

CURRENT_IRQL: 0

LAST_CONTROL_TRANSFER: from fffff80002d3d0ae to fffff80002cc9700

STACK_TEXT:
fffff880`05dfb968 fffff800`02d3d0ae : 00000000`0000001a 00000000`00041790 fffffa80`00081c30 00000000`0000ffff : nt!KeBugCheckEx
fffff880`05dfb970 fffff800`02d0b16a : 00000000`00000000 00000000`1a24ffff fffffa80`00000000 fffffa80`069e5060 : nt! ?? ::FNODOBFM::`string'+0x338c6
fffff880`05dfbb30 fffff800`02cc8953 : ffffffff`ffffffff 00000000`00b0f128 00000000`00b0f120 00000000`00008000 : nt!NtFreeVirtualMemory+0x5ca
fffff880`05dfbc20 00000000`7709f89a : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiSystemServiceCopyEnd+0x13
00000000`00b0f0e8 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x7709f89a
STACK_COMMAND: kb

FOLLOWUP_IP:
nt! ?? ::FNODOBFM::`string'+338c6
fffff800`02d3d0ae cc int 3

SYMBOL_STACK_INDEX: 1

SYMBOL_NAME: nt! ?? ::FNODOBFM::`string'+338c6

FOLLOWUP_NAME: MachineOwner

MODULE_NAME: nt

IMAGE_NAME: ntkrnlmp.exe

DEBUG_FLR_IMAGE_TIMESTAMP: 4d9fdd34

FAILURE_BUCKET_ID: X64_0x1a_41790_nt!_??_::FNODOBFM::_string_+338c6

BUCKET_ID: X64_0x1a_41790_nt!_??_::FNODOBFM::_string_+338c6

Followup: MachineOwner
---------

1: kd> lm t n
start end module name
fffff800`00baf000 fffff800`00bb9000 kdcom kdcom.dll Sat Feb 05 06:21:45 2011 (4D4D40D9)
fffff800`02c10000 fffff800`02c59000 hal hal.dll Mon Jul 13 20:27:36 2009 (4A5BDF08)
fffff800`02c59000 fffff800`03235000 nt ntkrnlmp.exe Fri Apr 08 23:14:44 2011 (4D9FDD34)
fffff880`00c00000 fffff880`00c17000 amd_sata amd_sata.sys Fri Apr 15 13:37:14 2011 (4DA8905A)
fffff880`00c17000 fffff880`00c2f000 rspndr rspndr.sys Mon Jul 13 19:08:50 2009 (4A5BCC92)
fffff880`00c5a000 fffff880`00c67000 mcupdate_AuthenticAMD mcupdate_AuthenticAMD.dll Mon Jul 13 20:29:09 2009 (4A5BDF65)
fffff880`00c67000 fffff880`00c7b000 PSHED PSHED.dll Mon Jul 13 20:32:23 2009 (4A5BE027)
fffff880`00c7b000 fffff880`00cd9000 CLFS CLFS.SYS Mon Jul 13 18:19:57 2009 (4A5BC11D)
fffff880`00cd9000 fffff880`00d99000 CI CI.dll Mon Jul 13 20:32:13 2009 (4A5BE01D)
fffff880`00d99000 fffff880`00da9000 PCIIDEX PCIIDEX.SYS Mon Jul 13 18:19:48 2009 (4A5BC114)
fffff880`00da9000 fffff880`00dc3000 mountmgr mountmgr.sys Mon Jul 13 18:19:54 2009 (4A5BC11A)
fffff880`00dc3000 fffff880`00ded000 ataport ataport.SYS Mon Jul 13 18:19:52 2009 (4A5BC118)
fffff880`00e00000 fffff880`00e15000 partmgr partmgr.sys Mon Jul 13 18:19:58 2009 (4A5BC11E)
fffff880`00e1500... Read more

http://www.sevenforums.com/bsod-help-support/177419-bsod-new-build.html
Relevancy 39.99%

Windows 7 SP1
x86 (32-bit)
full retail version
Everything inside is brand new
Havent tried re-installing
AMD Athlon II X4 640 processor 3.00Ghz
Ati Radeon HD5770
Asus M4A78LT-M LE
Z POWER 650W

Hi Thanks in advance for your help. This is the first pc i've built from scratch and the Bsod have only happened a few times and sometimes when playing games it crashes to desktop so i dont know if its related. The only other thing i can tell you is that i didnt realize that the graphics card needed a seperate power supply so i had to get a connector to go from two molex connectors.Thanks

Relevancy 39.56%

I just finished building a new PC, and now I have been getting BSOD from time to time. I have flashed the BIOS, and downloaded correct drivers but it does not seem to be working. I am going to do a mem test here soon, but hoping some one a little more experienced than myself can lend me a hand and point me in the right direction.

Will upload a dump file, sorry I have to keep it short for now, BSOD wont give me a chance to fully explain.
Specs:
ASUS P8Z68-V Pro Gen 3
Western Digital 250GB HD
Corsair Force 3 60GB SSD
16GB G-Skill DDR3 1333 Ram
Intel i-5 2500K
Windows 7 64bit OS
 

Relevancy 39.56%

Hi, I need help.
I have a new build that is throwing bsod when installing windows 7 home x64. some 0x00000124 and some 0x0000009c (0x0000000000000000, 0xfffff8000c36dpa0, 0x000000000f61d20000, oxoooooooo8f000136)
please and thank you
mobo a75m-hvs
apu amd a8-3850
ram team 4gx2 ted38192m13333hc9dc
hdd seagate 1TB st10000dl002
dvd samsung sh-222ab
 

A:Windows 7 new build F1 apu bsod

Ran any memory testers?
 

https://forums.techguy.org/threads/windows-7-new-build-f1-apu-bsod.1018209/
Relevancy 39.56%

Hello,

I've been having persistent BSoD problems on a custom rig. It happens mostly when I'm away. Of the few times I have been at my computer at the time of crash, I saw no warning signs.

Basic system info:
Windows 7 Professional (x64) retail
Fresh installation in March onto SSD

Hardware - Custom Build
Built in January but uses some older parts:
CPU: AMD Phenom II 720
Mobo: ASUS M4A79XTD Evo
GPU: Evga GTS 250 superclocked (used this card for a few years now)
Ram: Kingston hyperx KHX1333C7D3K4 (2 x 2gb)
SSD: OCZ Vertex 2 E 60gb
PSU: COOLER MASTER GX Series RS750-ACAAE3-US 750W

No memtest detected issues as on late April
No prime95 errors or induced crashes as of late April
If there's any other information or tests that might help please let me know.
Any help would be greatly appreciated.

A:BSoD on Custom Build

Unfortunately there were no dumps in your file but I found one major candidate for BSODs

Code:
DAEMON Tools Lite "c:\program files (x86)\daemon tools lite\dtlite.exe" -autorun KevinX3-720-Win\KevinX3-720 HKU\S-1-5-21-601797764-46032973-68966091-1000\SOFTWARE\Microsoft\Windows\CurrentVersion\Run
Uninstall, and de-install the driver after this tut:
DuplexSecure - FAQ
There are several substitutes for Daemon tools without harmful side effects
Freeware MagicISO Virtual CD/DVD-ROM(MagicDisc) Overview
SlySoft Virtual CloneDrive
Gizmo Central -- Enliven your PC
There were a couple BSODs (03/28 and 04/20) referring to your Roxio Software with the directive to update the PX engine from here
PX Engine - Description and Download
or uninstall it completely if you don't use it.

Boot into Safe mode and see if the comp crashes there, too
if not activate Driver Verifier to force some dumps to narrow down the problem and post any new dumps
Driver Verifier - Enable and Disable

-DG

http://www.sevenforums.com/bsod-help-support/165236-bsod-custom-build.html
Relevancy 39.56%

Good Evening,
I recently had a computer custom built at my local Fry's (not so local though..) 2 weeks ago.
On the second day, the CPU was BSOD hourly, and after bring it to Fry's, they said the power supply was bad, and they replaced it.
I'm still having issues with random BSOD and would rather not bring it to Fry's to have them trouble shoot it for a few days, replace the "bad" component, and give it back to me with the same issue.
My CPU and Motherboard temps average 30-35c even while gaming.

I'm beyond the "return" time frame and only have 2 weeks of build support left from Fry's.
Can someone please decode what the errors are saying and possibly point me in the right direction?
Thank you soooo much!
Sean

Here are my CPU specs
http://speccy.piriform.com/results/V...2duPWs4NcChjFo

A:BSOD on Custom Build

Hi

Your CPU seems to be overclocked and if i am not mistaken, it is intentional.


Code:
Core 0Core Speed: 4599.7 MHz
Multiplier: x 46.0
Bus Speed: 100.0 MHz
Temperature: 32 ?C
Thread 1
APIC ID: 0
Thread 2
APIC ID: 1
Core 1
Core Speed: 4499.7 MHz
Multiplier: x 45.0
Bus Speed: 100.0 MHz
Temperature: 34 ?C
Thread 1
APIC ID: 2
Thread 2
APIC ID: 3
Core 2
Core Speed: 4599.7 MHz
Multiplier: x 46.0
Bus Speed: 100.0 MHz
Temperature: 32 ?C
Thread 1
APIC ID: 4
Thread 2
APIC ID: 5
Core 3
Core Speed: 4599.7 MHz
Multiplier: x 46.0
Bus Speed: 100.0 MHz
Temperature: 26 ?C
Thread 1
APIC ID: 6
Thread 2
APIC ID: 7


Overclocking is the best way to make a system unstable, crash , freeze or blue screen. First logical steps in BSOD troubleshooting is nothing but reverting any changes made to the CPU/RAM frequency and voltage modifications. You should first uninstall "Asus AI suit III" otherwise it will auto overclock the system. Then enter BIOS setup and load "optimal default values".

You should also understand the merits and demerits of OC. There are certain situations where OC will benefit. Examples are "Autocad" and video rendering works. Those programs will show improved performance in higher clock speed. On the other hand, PC games are GPU centric and even the most CPU demanding games only require a basic quad core CPU like i5. None of today's games are capable of utilizing the full potential of your CPU and hence overclocking it is absolute unnecessary. By overclocking the CPU, you will get crashes instead of FPS increase.

http://www.eightforums.com/bsod-crashes-debugging/35286-bsod-custom-build.html
Relevancy 39.56%

Here s what I got PLEASE HELP AMD Phenom II x GHz x GB Corsair Ram DDR Biostar new build BSOD extravaganza on TA GB Corsair w power supply TB Samsung Spinpoint F HD SJ Acer H Monitor HP DVD DVD ROM Microsoft Wireless keyboard and mouse Windows Ultimate bit I put the PC together my self a couple months ago since then I ve been getting random almost always different BSOD s when starting up my PC It seems to happen more often on cold starts after hours of not turning on the pc I am also gettin BSOD s while using windows if I am able to load it -I ve done a clean install of windows ultimate several times -I ve run memtest through passes and haven t found errors on either stick I also tried using each memory stick individually and still came up with BSOD s -I tried sfc scannow several times as well as chkdsk -I tried startup repair sometimes it BSOD extravaganza on new build works sometimes it doesn t work -System restore usally lets me boot up after restart but later I will get BSOD again Sometimes I get the quot referenced memory could not be read quot error during system restore process and I have to reboot -I updated my bios after about weeks of getting errors and also tried updating everything else of the motherboard manufac site -I tried all windows updates for my hardware -I ran the samsung hard drive diagnostic and didn t get any errors -I get BSOD s even without installing any software on clean installs -I tried reseating everything on my MOBO -I don t have an extra PC to swap out hardware with I don t know if I can give anymore useful info but I have attached my dumpfiles and hopefully someone can please help me I finally built this PC and haven t been able to enjoy it yet PLEASE HELP SOMEONE nbsp

A:BSOD extravaganza on new build

What security software are you running? By the way, excellent diagnostic work on your part.
 

http://www.techspot.com/community/topics/bsod-extravaganza-on-new-build.153706/
Relevancy 39.56%

Hello all This seems like a pretty cool place I am surprised I haven't found it before Hardware Spec OCZ watt stealth stream PSU Cooler Master RC- and unstability build BSoD, 7 new WIN TDR, case Western Digital Caviar Black GB HDD Samsung x DVD Burner ASUS M A T-E Socket AM GX chipset BIOS MoBo onboard Radeon HD AMD Socket AM Phenom II X BE stock HSF no overclock GB X GB WIN 7 new build BSoD, TDR, and unstability OCZ obsidian DDR I recycled an old compaq keyboard a new Logitech wireless mouse and ancient Northgate Innovations quot LCD Monitor I am using Windows pro bit I have RAM set in BIOS mhz as my MoBo doesn't run natively also I have the voltage set to manufacturer specs is but my BIOS only allows increments it all started the day I built the system less then a week ago I built it updated my BIOS and all AMD ATI drivers for WIN 7 new build BSoD, TDR, and unstability my hardware I started getting TDR events with my ATI driver being recovered restared shortly followed by a BSoD After a crash course in the most basic usage of window debugging tools I saw it was calling out Atikmdag sys which after much forum trolling and googleing seems to be a pretty widespread issue When I had the most up to date ATI drivers and catylist control center installed i would get TDR events every minuet or so and my display was crappy kind of pixleated showing small 'tears' or slits in the desktop and big flashing blocks like an old NES game not loaded right If I used the scroll wheel on my mouse the page i was scrolling would go blank Anyways after uninstalling all ATI software I can now at least use the comp but it is still failing prime and if i stress the onboard GPU at all i get TDR or BSoD probably because i am not using ATI drivers Basicly I have tried old drivers newest drivers drivers only wih no CCC only one stick of RAM MSCONFIG Boot Tab and manually setting cores and Max RAM I have also tried running my RAM ganged into one channel So far the only way I have been able to keep the system stable enough to even test stability is by not running any ATI software Drivers at all but now my GPU is unstable and I am still hainge stress test problems with the whole system A Major concern of mine is I don't know if i should change my RAM out for something with more documented support from my MoBo could the RAM failing be adding to all my Blue screens and the failure of my GPU I have succesfully run Memtest on my RAM for a couple hours with no failure so i think the RAM is good but it might not be interacting well with the rest of my set up I have never built from scratch just rebuilt old systems back before SATA muti-cores and PCIe so I am just really at a loss as to what my next steps should be Any advice would be greatly appreciated

A:WIN 7 new build BSoD, TDR, and unstability

So anyone feel like taking a crack at this one?

http://www.techsupportforum.com/forums/f299/win-7-new-build-bsod-tdr-and-unstability-429793.html
Relevancy 39.56%

Hi!,

I finished building a day trading PC and had a BSOD last night with a 0x0000016 stop error. The minidump is attached.

System Specs

AMD A6-3650
Asus F1A55-M LX Plus M/B
8 GB DDR3 Ram
Sapphire Flex Radeon HD 6450
2 WD HDD's in RAID1
SeaSonic M12II 620 Bronze PSU 620Watt
3 Asus Monitors

Clean Install Windows 7 HP x64 with Important updates
Catalyst 12.4 Drivers

Any help would be appreciated

Thanks,
-Daniel

Edit: This is @ 5/30/2012 @ 3:46 AM
 

A:0x00000116 BSOD New Build

The dump file is pointing at the ATI card. Do you have the latest drivers? It also my be related to heat or power. If you have another computer, test the card and see if it blue screens there.
 

https://forums.techguy.org/threads/0x00000116-bsod-new-build.1055212/
Relevancy 39.56%

I've just put everything together and ran it for about 10 hours of total use before it randomly gotten a bsod. I was actually surfing the web at the time right before I had a pop up. I don't know if that's coincidence or it caused the bsod, which I think is unlikely. There are no overclocks or anything altered, it's pretty much put together and ran. I couldn't find much information but I did read that Avira can cause this bsod which I installed 3 hours prior. If anyone has any suggestions I would greatly appreciate it. Thanks in advance.

I will post the dump

Specs
os: windows 7 64 bit
cpu: I5 4460
mobo: Msi z87 g41 *most recent chipset
gpu: evga gtx 570 *older driver
ram: ddr3 gskill ares 8gb
psu: evga 600b
hdd: wd black 1tb
 

A:Random BSOD new build

Also forgot the mention the reason why I installed an older driver for the gpu is because the newest driver crashes frequently on my other build and it has been mentioned by many people that the newer drivers cause issues. I swapped the gpu over to this build and am I'm running 314.22 nvidia driver.
 

https://forums.techguy.org/threads/random-bsod-new-build.1166042/
Relevancy 39.56%

Just put together a new pc, Win 7 Pro.

Phenom II 940, 1 stick of Mushkin ram, running at lower than rated speeds (1 of the pair's sticks was bad, this stick tested good)
8800 Ultra gpu
Corsair 32gb SSD

All stock settings.

Get BSODs while playing resource demanding games. I am going to reinstall the graphics drivers, and turn off the automatic driver installation first... Also going to try to find my correct sound card drivers, creative x-fi card. The ones I had installed weren't quite right. Not sure what is conflicting. There is one driver error under device manager, but I don't know if that is causing it or not.

Thanks for input

A:BSOD, unknown causes, new build

  
Quote: Originally Posted by silentbravo


Just put together a new pc, Win 7 Pro.

Phenom II 940, 1 stick of Mushkin ram, running at lower than rated speeds (1 of the pair's sticks was bad, this stick tested good)
8800 Ultra gpu
Corsair 32gb SSD

All stock settings.

Get BSODs while playing resource demanding games. I am going to reinstall the graphics drivers, and turn off the automatic driver installation first... Also going to try to find my correct sound card drivers, creative x-fi card. The ones I had installed weren't quite right. Not sure what is conflicting. There is one driver error under device manager, but I don't know if that is causing it or not.

Thanks for input



Hi SB and welcome

A new pc? The most obvious problem is from some really old drivers. The most glaring is the acacpi.sys dated 3/05.

I would update the drivers

ASACPI.sys Sun Mar 27 22:30:36 2005
[quote]
The 2005 version of this driver is a known BSOD cause.
Please visit this link: ASUSTeK Computer Inc.-Support- download_item_mkt
Scroll down to the Utilities category, then scroll down to the "ATK0110 driver for WindowsXP/Vista/Windows 7 32&64-bit " (it's about the 8th item down).
Download and install it.
Go to C:\Windows\System32\drivers to check and make sure that the ASACPI.sys file is date stamped from 2009 or 2010 (NOT 2005).[/quote
Run a system file check

Run a system file check to verify and repair your system files.
To do this type cmd in search, then right click to run as administrator, then
SFC /SCANNOW

read here for more information SFC /SCANNOW Command - System File Checker

Let us know the results from the report at the end.

Ken



Code:
ASACPI.sys fffff880`042ad000 fffff880`042b5000 0x00008000 0x42476c4c 3/27/2005 22:30:36
RTCore64.sys fffff880`03bdb000 fffff880`03be1000 0x00006000 0x42941d90 5/25/2005 02:39:12
Alpham264.sys fffff880`05152000 fffff880`05157500 0x00005500 0x45ffae87 3/20/2007 05:51:03
Alpham164.sys fffff880`05145000 fffff880`05151f00 0x0000cf00 0x46a45f4f 7/23/2007 03:57:03
GizmoDrv.SYS fffff880`03eb8000 fffff880`03ec3000 0x0000b000 0x482fbd72 5/18/2008 01:24:02
ctac32k.sys fffff880`0491e000 fffff880`049cc000 0x000ae000 0x486b3e7e 7/2/2008 04:38:22
ALSysIO64.sys fffff880`03bd3000 fffff880`03bdb000 0x00008000 0x49eb7e50 4/19/2009 15:41:04
spldr.sys fffff880`017da000 fffff880`017e2000 0x00008000 0x4a0858bb 5/11/2009 12:56:27
lirsgt.sys fffff880`02709000 fffff880`02716000 0x0000d000 0x4a100bf1 5/17/2009 09:06:57
atksgt.sys fffff880`026ba000 fffff880`02709000 0x0004f000 0x4a1012e2 5/17/2009 09:36:34
amdxata.sys fffff880`01174000 fffff880`0117f000 0x0000b000 0x4a12f2eb 5/19/2009 13:56:59

http://www.sevenforums.com/bsod-help-support/109106-bsod-unknown-causes-new-build.html
Relevancy 39.56%

Windows 7 32bit SP1 on a new build:

? i5-2500k
? Sapphire 1GB Radeon HD 6950
? MSI P67A-C43 (B3)
? Power Supply: "Antec25 Earthwatts 650w"

There doesn't seem to be any pattern to what I'm doing when it happens.

Possibly useless info: I've been trying to install various drivers from MSI's site because originally the USB ports would all switch off whenever I connected my iPhone, saying there was a surge. Somewhere along the way that problem stopped happening, but unfortunately I can't remember whether the BSsOD were happening before or after I started trying to fix the USB problem.

Thanks in advance for any and all assistance. This is my first powerful machine in years so I'd like to get it working properly before Christmas!

A:[SOLVED] BSOD - new build

Hey buddy I had a very similar excperience with my new i7 build.

No patterens etc. I truned out to be the SSD in the end.

Do you have an SSD?

try an isntall on an old HDD and see if its fine

Run prime95 blend test for 24 hours - if this is fine maybe its storage....

http://www.techsupportforum.com/forums/f299/solved-bsod-new-build-616319.html
Relevancy 39.56%

I recently built a new BSoD Errors New Various Build After rig for a combination of rendering video editing and some gaming Over the past five days I've had BSoD errors at seemingly random times The first error occurred while I was running a game and checking my CPU temperature with a third party app It read SYSTEM THREAD EXCEPTION NOT HANDLED The second Various BSoD Errors After New Build two errors occurred right after I booted from the first error one after the other I would type in my pin to be greeted by MEMORY MANAGEMENT I've also run into PFN LIST CORRUPT while watching a video IRQL NOT Various BSoD Errors After New Build LESS OR EQUAL while my computer was in sleep mode And CRITICAL PROCESS DIED while running the first time setup for a game The files that seem to be repeatedly related to these crashes are hal dll and especially ntoskrnl exe although the first crash also referenced ACPI sys I am running windows with the following specs i - k GeForce GTX Ti GB of HyperX Fury DDR MSI Krait Gaming Motherboard The processor is water cooled and there is a decent amount of airflow through the case plus every time I've checked temperatures they've been below c so I don't think this is an overheating issue Things I've tried so far sfc scannow did not return any errors I did not do this with an install disc however so I don't know if that would change anything I did a memory test with Windows Memory Diagnostic standard test and it did not return any errors Addendum to this when I tried to run the extended test the program seemed to freeze at I also tried memtest After about hours and passes I still did not receive any errors I've taken out and reinstalled the memory sticks making sure they were connected properly Things I know From my research I've deduced that this could be a hardware problem most likely a problem with the ram However I want to make sure that's the issue before I go out buying new parts and returning these I've also heard that some of these errors can be caused by a short in a keyboard which mine might have as it sometimes behaves weirdly or other peripheral There have been very few issues with this computer so far This was my first time building a PC from scratch but the only issue I ran into was the motherboard not posting a few times This was resolved by me wiggling the on board lithium battery and just rebooting it a few times

http://www.techsupportforum.com/forums/f299/various-bsod-errors-after-new-build-1077578.html
Relevancy 39.56%

Hey thanks for reading it's good there's actually somewhere to go with these kinda errors seeing as M don't really care too much Error reporting lol and as I built this machine myself I don't have any kinda OEM support I suppose the best place to start is explaining where Build BSOD New (DRIVER_IRQL_NOT_LESS_OR_EQUAL) I am with this basically this is my first big build I've injected a lot of cash into this as a christmas birthday in days present to myself so it's a lot of excitement for me as a PC enthusiast which makes it even worse that the bloody thing keeps BSOD'ing on me At first I thought it was just when it was doing something involving my webcam Logitech's drivers have never been all that awesome if you ask me so I unplugged it uninstalled drivers etc to see if it'd give me stability It didn't Now I've had this machine for about hours now and so far I've had numerous BSOD's during web browsing fullscreen youtube videos gaming RUINED my Skyrim experience didn't quicksave - - and generally anytime I actually want to do anything on the machine After the New Build BSOD (DRIVER_IRQL_NOT_LESS_OR_EQUAL) webcam drivers made no difference I thought video drivers as I had the nVidia beta drivers installed Got rid of them put the stable official release on Clean install and thought that'd help Once New Build BSOD (DRIVER_IRQL_NOT_LESS_OR_EQUAL) again It didn't Lastly I thought 'It must be the RAM GiB is a lot and there's a lot of margin for error there' so I performed windows' own Memtest and All apparently fine I reseated the RAM hoping maybe a flake of skin or a hair was somehow making it unstable but no Nothing has helped It loves to BSOD So I hopped onto the Google Train and found my way here and I'm feeling pretty hopeful from reading other threads that there's a genuine community here able to help so in advance Thank you for saving Christmas and birthday OS Windows Home Premium x OEM Hardware All out-the-box new And now on with the zip

A:New Build BSOD (DRIVER_IRQL_NOT_LESS_OR_EQUAL)

  
Quote: Originally Posted by Arcasa


Hey, thanks for reading, it's good there's actually somewhere to go with these kinda errors seeing as M$ don't really care too much (Error reporting lol.) and as I built this machine myself I don't have any kinda OEM support.

I suppose the best place to start is explaining where I am with this, basically this is my first big build, I've injected a lot of cash into this as a christmas/birthday (20 in 6 days ) present to myself, so it's a lot of excitement for me as a PC enthusiast which makes it even worse that the bloody thing keeps BSOD'ing on me. At first I thought it was just when it was doing something involving my webcam (Logitech's drivers have never been all that awesome if you ask me) so I unplugged it, uninstalled drivers etc to see if it'd give me stability... It didn't.

Now I've had this machine for about 40 hours now and so far I've had numerous BSOD's during web browsing, fullscreen youtube videos, gaming (RUINED my Skyrim experience, didn't quicksave -.-) and generally anytime I actually want to do anything on the machine. After the webcam drivers made no difference, I thought video drivers, as I had the nVidia beta drivers installed... Got rid of them, put the stable official release on (Clean install) and thought that'd help. Once again... It didn't.

Lastly I thought 'It must be the RAM, 16GiB is a lot and there's a lot of margin for error there' so I performed windows' own Memtest and... All apparently fine. I reseated the RAM hoping maybe a flake of skin or a hair was somehow making it unstable, but no. Nothing has helped. It loves to BSOD.

So I hopped onto the Google Train and found my way here, and I'm feeling pretty hopeful from reading other threads that there's a genuine community here able to help, so in advance;

Thank you for saving Christmas.
... and birthday

OS: Windows 7 Home Premium x64 OEM
Hardware: All out-the-box new

And now on with the zip!


All of these (every one of them) were related to your Intel Ethernet driver(e1q62x64.sys)
I would re-install the newest version available.

http://www.sevenforums.com/bsod-help-support/201313-new-build-bsod-driver_irql_not_less_or_equal.html
Relevancy 39.56%

Have posted previously when the computer was built on an upgrade from XP. I have now built on a fresh HDD and am getting occasional Blue screens. Sometimes when nothing is happening and once when playing a game.

I have attached the minidump files. If someone could take a look and give me some pointers, that woudl be great

Many Thanks

Kwack

A:Random BSOD on new build

  
Quote: Originally Posted by kwack


Have posted previously when the computer was built on an upgrade from XP. I have now built on a fresh HDD and am getting occasional Blue screens. Sometimes when nothing is happening and once when playing a game.

I have attached the minidump files. If someone could take a look and give me some pointers, that woudl be great

Many Thanks

Kwack



Hi KWack and welcome

Well fairly obvious these were probably caused by memory corruption. Might also be heat. In any case its not sofware because you had these both under the upgrade and clean install

download memtestx86 anr run 5 passes. let us know if it passes or if you get any new bsods

Ken J+


Code:
123009-16286-01.dmp 12/30/2009 4:45:40 PM IRQL_NOT_LESS_OR_EQUAL 0x0000000a 00000002`00000259 00000000`00000002 00000000`00000001 fffff800`02b29abf ntoskrnl.exe ntoskrnl.exe+71f00
123009-16707-01.dmp 12/30/2009 10:58:02 PM IRQL_NOT_LESS_OR_EQUAL 0x0000000a 00000000`00000048 00000000`00000002 00000000`00000001 fffff800`02b27abf ntoskrnl.exe ntoskrnl.exe+71f00
122909-17113-01.dmp 12/29/2009 9:35:18 AM MEMORY_MANAGEMENT 0x0000001a 00000000`00041287 00000000`00000038 00000000`00000000 00000000`00000000 ntoskrnl.exe ntoskrnl.exe+71f00

Code:

Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\K\Desktop\123009-16707-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*d:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (2 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Machine Name:
Kernel base = 0xfffff800`02a05000 PsLoadedModuleList = 0xfffff800`02c42e50
Debug session time: Wed Dec 30 17:56:55.458 2009 (GMT-5)
System Uptime: 0 days 6:11:36.034
Loading Kernel Symbols
...............................................................
................................................................
........................
Loading User Symbols
Loading unloaded module list
.....
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck A, {48, 2, 1, fffff80002b27abf}

Probably caused by : memory_corruption ( nt!MiIdentifyPfn+26f )

Followup: MachineOwner
---------

0: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

IRQL_NOT_LESS_OR_EQUAL (a)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high. This is usually
caused by drivers using improper addresses.
If a kernel debugger is available get the stack backtrace.
Arguments:
Arg1: 0000000000000048, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000001, bitfield :
bit 0 : value 0 = read operation, 1 = write operation
bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: fffff80002b27abf, address which referenced memory

Debugg... Read more

http://www.sevenforums.com/bsod-help-support/50864-random-bsod-new-build.html
Relevancy 39.56%

All of these components are less than days old Build getting often Fresh BSOD bought new and put straight into this build Keep getting a BSOD so I guess I Fresh Build getting BSOD often ll try to give as much information as I can and hopefully someone can give me a hand Thanks in advance Edit It s also worth noting that it seems to occur more frequently while playing Star Wars the Old Republic but has also occurred while not doing so Quick Specs Case Thermaltkae - VL Series - Armor A PSU Antec HCG- W Main Board ASUS M A AMD AM - -MIBFS -G AAY Z CPU AMD FX - GHz Quad-Core - FD WMGUSBX GPU EVGA Geforce GTX Ti GB GDDR PCI Express - G-P - -KR RAMM Corsair XMS GB MHz DDR DIMM x - CMX GX M A C HDD Western Digital Caviar GP TB - WMAV Information from DxDiag ------------------ System Information ------------------ Time of this report Machine name CHAD-PC Operating System Windows Ultimate -bit Build win gdr - Language English Regional Setting English System Manufacturer To be filled by O E M System Model To be filled by O E M BIOS BIOS Date Ver Processor AMD FX - Quad-Core Processor CPUs GHz Memory MB RAM Available OS Memory MB RAM Page File MB used MB available Windows Dir C Windows DirectX Version DirectX DX Setup Parameters Not found User DPI Setting Using System DPI System DPI Setting DPI percent DWM DPI Scaling Disabled DxDiag Version bit Unicode ------------ DxDiag Notes ------------ Display Tab No problems found Sound Tab No problems found Sound Tab No problems found Sound Tab No problems found Input Tab No problems found -------------------- DirectX Debug Levels -------------------- Direct D retail DirectDraw retail DirectInput retail DirectMusic retail DirectPlay retail DirectSound retail DirectShow retail --------------- Display Devices --------------- Card name NVIDIA GeForce GTX Ti Manufacturer NVIDIA Chip type GeForce GTX Ti DAC type Integrated RAMDAC Device Key Enum PCI VEN DE amp DEV amp SUBSYS amp REV A Display Memory MB Dedicated Memory MB Shared Memory MB Current Mode x bit Hz Monitor Name LG E Digital Monitor Model E Monitor Id GSM E Native Mode x p Hz Output Type DVI Driver Name nvd dumx dll nvwgf umx dll nvwgf umx dll nvd dum nvwgf um nvwgf um Driver File Version English Driver Version DDI Version Driver Model WDDM Driver Attributes Final Retail Driver Date Size bytes WHQL Logo d Yes WHQL Date Stamp Device Identifier D B E E- - CF- A- FC C Vendor ID x DE Device ID x SubSys ID x Revision ID x A Driver Strong Name oem inf NVIDIA SetA Devices NTamd Section pci ven de amp dev Rank Of Driver E Video Accel ModeMPEG A ModeMPEG C ModeVC C ModeWMV C Deinterlace Caps CB - - - E - C DB Format In Out YUY YUY Frames Prev Fwd Back Caps VideoProcess YUV RGB VideoProcess StretchX VideoProcess StretchY DeinterlaceTech PixelAdaptive F F DA - B - B F- D -C E EAAB Format In Out YUY YUY Frames Prev Fwd Back Caps VideoProcess YUV RGB VideoProcess StretchX VideoProcess StretchY A A C -C EC- BD - EDE-F C DC B Format In Out YUY YUY Frames Prev Fwd Back Caps VideoProcess YUV RGB VideoProcess StretchX VideoProcess StretchY AA E- - A - C - F FAF E E Format In Out YUY YUY Frames Prev Fwd Back Caps VideoProcess YUV RGB VideoProcess StretchX VideoProcess StretchY DeinterlaceTech BOBVerticalStretch CB - - - E - C DB Format In Out UYVY UYVY Frames Prev Fwd Back Caps VideoProcess YUV RGB VideoProcess StretchX VideoProcess StretchY DeinterlaceTech PixelAdaptive F F DA - B - B F- D -C E EAAB Format In Out UYVY UYVY Frames Prev Fwd Back Caps VideoProcess YUV RGB VideoProcess StretchX VideoProcess StretchY A A C -C EC- BD - EDE-F C DC B Format In Out UYVY UYVY Frames Prev Fwd Back Caps VideoProcess YUV RGB VideoProcess StretchX VideoProcess StretchY AA E- - A - C - F FAF E E Format In Out UYVY UYVY Frames Prev Fwd Back Caps VideoProcess YUV RGB VideoProcess StretchX VideoProcess StretchY DeinterlaceTech BOBVerticalStretch CB - - - E - C DB Format In Out YV x Frames Prev Fwd Back Caps VideoProcess YUV RGB VideoProcess StretchX VideoProcess StretchY Dein... Read more

A:Fresh Build getting BSOD often

Did you download and install the latest applicable drivers, starting with the chipset driver?

http://www.bleepingcomputer.com/forums/t/441350/fresh-build-getting-bsod-often/
Relevancy 39.56%

Hi I have a new custom built computer put together by new BSOD on build Random someone I work Random BSOD on new build with I have been plagued with problems and I think it's hardware related I got my friend to reinstall Windows but it crashed several times before install completed He said he tried on my SSD and Samsung HD but still the same problems occur Ran Memtest and passed several cycles but tried again and got errors I removed a ram stick and it passed but got a BSOD after minutes of browsing the web Then the other stick had the same problems but passed Memtest for minutes until the text on screen garbled where errors are usually listed I reran test and it passed for a long time I have no overclock and everything is running at correct voltage Seems to be very random and can happen when purposely restarting my PC or doing barely anything at all I'm starting to think it's either the RAM or motherboard causing the problems Here are my components- i k Gigabyte G Sniper Z GB G Skill Ram ATI OCZ Vertex GB SSD TB Samsung HD Corsair HX W PSU I include my last batch of crash dumps since I had Windows reinstalled Thanks in advance I might have to RMA something but want to narrow things down Jay

A:Random BSOD on new build

Sorry for the bump, my thread is getting buried without a reply thus far. I guess my dump files are too generic for working out a potential hardware issue? If anybody has even the slightest suggestion I would be happy to hear it. Thanks.

http://www.sevenforums.com/bsod-help-support/199003-random-bsod-new-build.html
Relevancy 39.56%

Hey guys I just built a computer on Monday with the following specs all parts are brand new AMD Phenom II x BE Sapphire HD MSI A-G x GB Corsair RAM Antec W PSU So my computer has been running fine until yesterday while playing startup New on build BSOD Fallout NV my computer BSOD x a IRQL NOT LESS OR EQUAL and then it would BSOD on bootup every time I could also only boot into safe mode about of the time I ran memtest a couple of times and it reported no errors and I also tried removing each stick of ram and testing it that way but the computer still BSOD I tried reinstalling my ATI CCC and graphics drivers but still BSOD I finally gave up and New build BSOD on startup reinstalled Win Ultimate x Today however the same BSOD message appeared and I once again cannot boot into non-safe mode Please help I also cannot run perfmon report I get the error message quot The system cannot find the path specified quot

A:New build BSOD on startup

Welcome to SF.






Quote:
IRQL_NOT_LESS_OR_EQUAL (a)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high. This is usually
caused by drivers using improper addresses.


Update video driver:
Driver c:\windows\system32\drivers\vgapnp.sys (6.1.7600.16385, 28.50 KB (29,184 bytes), 7/13/2009 7:38 PM)

http://www.sevenforums.com/bsod-help-support/136432-new-build-bsod-startup.html
Relevancy 39.56%

My new parts I have installed: Phenom 965BE, ASRock M3A790GXH/USB3, 2x 2GB DDR3 1600MHz (Running @1333) Corsair XMS3.

I Have no clue why this is happening

Even worse, it's happening on Christmas D:

I've also noticed that my mouse + kb keep on disconnecting and re-connecting (quite quickly though) every minute.

Specs in 'My sys specs'

EDIT: Some other info.

I still get BSOD when I go into safe mode.
Much appreciated thanks, and merry Christmas!

A:New build - BSOD'ing like crazy!!

  
Quote: Originally Posted by nbkp


My new parts I have installed: Phenom 965BE, ASRock M3A790GXH/USB3, 2x 2GB DDR3 1600MHz (Running @1333) Corsair XMS3.

I Have no clue why this is happening

Even worse, it's happening on Christmas D:

I've also noticed that my mouse + kb keep on disconnecting and re-connecting (quite quickly though) every minute.

Specs in 'My sys specs'

EDIT: Some other info.

I still get BSOD when I go into safe mode.
Much appreciated thanks, and merry Christmas!


This one was caused by your video driver please use these instructions to remove and re-install

When upgrading your graphic driver you MUST remove all traces of the current driver. In order to do that we recommend using Guru3D - Driver Sweeper

When it is removed then download and install the fresh copy.

Code:

Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\K\Desktop\Windows7_BSOD_jcgriff2\081210-24070-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*C:\SymCache*http://msdl.microsoft.com/download/symbols;srv*e:\symbols
*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (2 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Machine Name:
Kernel base = 0xfffff800`02a4c000 PsLoadedModuleList = 0xfffff800`02c89e50
Debug session time: Thu Aug 12 11:54:05.616 2010 (GMT-5)
System Uptime: 0 days 2:19:53.442
Loading Kernel Symbols
...............................................................
................................................................
.................................
Loading User Symbols
Loading unloaded module list
.....
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 116, {fffffa80036584e0, fffff8800f38cf9c, 0, 2}

Unable to load image \SystemRoot\system32\DRIVERS\nvlddmkm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
Probably caused by : nvlddmkm.sys ( nvlddmkm+112f9c )

Followup: MachineOwner
---------

Ken J

http://www.sevenforums.com/bsod-help-support/133265-new-build-bsoding-like-crazy.html
Relevancy 39.56%

I've had the new computer I put together going for about a week now everything is new from Newegg but I have been getting build BSOD computer with new some very sporadic BSOD I have gotton up from my computer to get a drink BSOD with new computer build come back and the BSOD is up Playing a game Heroes of Newerth has BSOD during Each time I BSOD I reboot my computer and it BSODs again within secs- min After another reboot the computer seems to run fine for a day It happens about once BSOD with new computer build a day or every other day I'm trying to figure out what is causing it to fix it and to have a stable system I filled out my profile with my computer specs but I'll put the basic info here Windows Enterprise x Service pack Intel R i - k ghz GB ram GTX ti Kingston gb SSD My friend believes my CPU might be bad I did a burn test and it passed with the cores staying at good temps I've looked at temps in CPUID HWMON and CPU-Z at idle and while playing games and they seem fine Memory test in bios passed Any help would be much appreciated

A:BSOD with new computer build

Hi estier

I would like you to run memtest86 via this guide: RAM - Test with Memtest86+


Code:
Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\Administrator\Downloads\estierinfo\Windows_NT6_BSOD_jcgriff2\091111-8080-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*F:\SymCache*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Machine Name:
Kernel base = 0xfffff800`03067000 PsLoadedModuleList = 0xfffff800`032ac670
Debug session time: Sun Sep 11 21:08:09.239 2011 (UTC - 6:00)
System Uptime: 0 days 3:02:54.473
Loading Kernel Symbols
...............................................................
................................................................
......................
Loading User Symbols
Loading unloaded module list
......
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck F4, {3, fffffa800962bb30, fffffa800962be10, fffff800033e78b0}

Probably caused by : svchost.exe

Followup: MachineOwner
---------

3: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

CRITICAL_OBJECT_TERMINATION (f4)
A process or thread crucial to system operation has unexpectedly exited or been
terminated.
Several processes and threads are necessary for the operation of the
system; when they are terminated (for any reason), the system can no
longer function.
Arguments:
Arg1: 0000000000000003, Process
Arg2: fffffa800962bb30, Terminating object
Arg3: fffffa800962be10, Process image file name
Arg4: fffff800033e78b0, Explanatory message (ascii)

Debugging Details:
------------------
PROCESS_OBJECT: fffffa800962bb30

IMAGE_NAME: svchost.exe

DEBUG_FLR_IMAGE_TIMESTAMP: 0

MODULE_NAME: svchost

FAULTING_MODULE: 0000000000000000

PROCESS_NAME: svchost.exe

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

BUGCHECK_STR: 0xF4

CURRENT_IRQL: 0

STACK_TEXT:
fffff880`096259c8 fffff800`0346e5e2 : 00000000`000000f4 00000000`00000003 fffffa80`0962bb30 fffffa80`0962be10 : nt!KeBugCheckEx
fffff880`096259d0 fffff800`0341b99b : 00000000`00000001 fffffa80`0962b450 fffffa80`0962bb30 00000000`74e72450 : nt!PspCatchCriticalBreak+0x92
fffff880`09625a10 fffff800`0339b448 : 00000000`00000001 00000000`00000001 fffffa80`0962bb30 00000000`00000000 : nt! ?? ::NNGAKEGL::`string'+0x176d6
fffff880`09625a60 fffff800`030e2ed3 : fffffa80`0962b450 00000000`00000000 fffffa80`0962b450 fffffa80`00008001 : nt!NtTerminateProcess+0xf4
fffff880`09625ae0 00000000`772515da : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiSystemServiceCopyEnd+0x13
00000000`0008e318 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x772515da
STACK_COMMAND: kb

FOLLOWUP_NAME: MachineOwner

FAILURE_BUCKET_ID: X64_0xF4_IMAGE_svchost.exe

BUCKET_ID: X64_0xF4_IMAGE_svchost.exe

Followup: MachineOwner
---------

3: kd> lmtsmn
start end module name
fffff880`00f810... Read more

http://www.sevenforums.com/bsod-help-support/186238-bsod-new-computer-build.html
Relevancy 39.56%

Hey everyone,
Just got my new build going and have hit a BSOD already 0.0 just want to make sure all is OK

? OS - Windows 7
? Architecture - x64
? What was original installed OS on system? Yes
? What version OS: Full Retail
? Age of system (hardware) - Brand New
? Age of OS installation - have you re-installed the OS? Less than a day
? CPU - Intel 2500k
? Video Card - Intel HD3000 (currently)
? MotherBoard - Asus Gene-z
? Power Supply - Silverstone Strider 700W

Thanks for any help!!

A:BSOD on fresh build

I can find no record of the BSODs in the files. That does not necessarily mean they didn't occur - just that they were not recorded.

Follow these instructions, then next time a BSOD occurs take a photo of it and post it here:

Quote:




Go to START -> type view advanced system settings press enter -> Advanced -> Settings (under Startup and Recovery)

You should see a screen that looks like this -


Set the settings how I have them. Make sure Automatic Restart is unticked.

On the Drop-down with Small memory dump (256KB) in it select Kernel Memory Dump and check that that has the Directory set to %SystemRoot%\MEMORY.DMP. Make sure to set the drop down back to Small memory dump (256KB)

Then press OK.

Also go back a few windows, and instead of selecting Settings (under Startup and Recovery) select Settings (under Performance) -> Advanced -> Change (under virtual memory) -> make sure Automatically manage paging file size for all drives is ticked, then press OK.

http://www.techsupportforum.com/forums/f299/bsod-on-fresh-build-617239.html
Relevancy 39.56%

Hi everyone Ive been getting some bsods maybe one a day They happen when i'm not overclocked and when im overclocked I've build BSOD New getting occasional played crysis for hours with no problem at X but other times when im just surfing and listening to music bam bsod In fact two others came with little no stress on the system and one came on shutdown from what I can tell dump files and sysinfo attached its corrupted memory but I pass memtest hours so it's not corrupted memory Realtemp reports C idle C max load and prime passes after hours Heres my build CM New build getting occasional BSOD case CM realpower Pro W E with xigmatek HDT-S gb gskill - - - x had errors on memtest at v passes at v but still getting bsods gigabyte EP -DS L sapphire HD with fanspeed set to catalyst pioneer blu-ray segate barracuda gig running vista home premium x sp So I would suspect the power supply except the crashes happen when I'm basically doing nothing not when I'm stressing it It's about a week old build so really anyone have some ideas what else I can test to New build getting occasional BSOD find what might be wrong or New build getting occasional BSOD even which part i should RMA Thanks in advance

A:New build getting occasional BSOD

Hi mediv42 . . .

I picked up the three dump files and the msinfo32 NFO file (thank you) and will run them within the next few days.

Regards. . .

jcgriff2

.

http://www.techsupportforum.com/forums/f299/new-build-getting-occasional-bsod-277971.html
Relevancy 39.56%

OK so I built a system and after a frustrating bout with BSODs caused by a bad mobo (replaced) i finally got it to work. However i was just browsing the interwebs and i got a bluescreen in fact ive gotten several 3 have been stop code 3b

Specs
Win7 Ultimate
AMD FX-4100
ASUS Sabertooth 990FX
8gb of ram
560 Ti 1gb

ran memtest for 12 or so passes while i was at work no issues with it did a sfc/ scannow and all that good stuff. driver scanner is turning up clean
thinking this is beyond my knowledge they happen every 3-4 days and its quite irritating.
all dumps as of late attached

A:BSOD at random on new build

Hi,

Install SP1: Learn how to install Windows 7 Service Pack 1 (SP1)

Run each of the three Prime95 tests: Hardware - Stress Test With Prime95

What model is your PSU?

If the BSODs persist, please upload a jcgriff2 report: http://www.sevenforums.com/crashes-d...tructions.html

...Summary of the dumps:

Code:

Built by: 7600.16841.amd64fre.win7_gdr.110622-1503
Debug session time: Thu Nov 24 17:44:18.319 2011 (UTC - 5:00)
System Uptime: 0 days 7:14:22.802
Probably caused by : fltmgr.sys ( fltmgr!TreeInsert+40 )
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x3B
PROCESS_NAME: Safari.exe
FAILURE_BUCKET_ID: X64_0x3B_fltmgr!TreeInsert+40
BiosReleaseDate = 09/28/2011
SystemProductName = To be filled by O.E.M.
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7600.16841.amd64fre.win7_gdr.110622-1503
Debug session time: Sun Nov 20 23:43:37.363 2011 (UTC - 5:00)
System Uptime: 0 days 2:52:28.846
Probably caused by : memory_corruption ( nt!MiUnlinkFreeOrZeroedPage+1ca )
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x3B
PROCESS_NAME: svchost.exe
FAILURE_BUCKET_ID: X64_0x3B_nt!MiUnlinkFreeOrZeroedPage+1ca
BiosReleaseDate = 09/28/2011
SystemProductName = To be filled by O.E.M.
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7600.16841.amd64fre.win7_gdr.110622-1503
Debug session time: Thu Nov 17 15:37:09.128 2011 (UTC - 5:00)
System Uptime: 0 days 18:28:45.000
Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+4a13 )
BUGCHECK_STR: 0x1a_41284
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: System
FAILURE_BUCKET_ID: X64_0x1a_41284_nt!_??_::FNODOBFM::_string_+4a13
BiosReleaseDate = 09/28/2011
SystemProductName = To be filled by O.E.M.
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7600.16841.amd64fre.win7_gdr.110622-1503
Debug session time: Wed Nov 16 21:05:52.112 2011 (UTC - 5:00)
System Uptime: 0 days 7:56:16.594
Probably caused by : memory_corruption ( nt!MiUnlinkFreeOrZeroedPage+1ca )
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x3B
PROCESS_NAME: svchost.exe
FAILURE_BUCKET_ID: X64_0x3B_nt!MiUnlinkFreeOrZeroedPage+1ca
BiosReleaseDate = 09/28/2011
SystemProductName = To be filled by O.E.M.
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7600.16841.amd64fre.win7_gdr.110622-1503
Debug session time: Mon Nov 14 15:50:18.490 2011 (UTC - 5:00)
System Uptime: 0 days 2:56:43.363
Probably caused by : ntkrnlmp.exe ( nt!CmpDelayDerefKCBWorker+d6 )
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: System
BUGCHECK_STR: 0x7E
FAILURE_BUCKET_ID: X64_0x7E_nt!CmpDelayDerefKCBWorker+d6
BiosReleaseDate = 09/28/2011
SystemProductName = To be filled by O.E.M.
??????????????????????????????????????????????????????????????????????????????????????``

http://www.sevenforums.com/bsod-help-support/199134-bsod-random-new-build.html
Relevancy 39.56%

Just built a pc and everytime i start up i have to go through the windows 8 setup with personalizing and stuff, then right when it gets to setting up network it shows the error in the picture

http://www.techsupportforum.com/forums/f299/new-build-bsod-on-boot-1078954.html
Relevancy 39.56%

I just built a new PC- Installed Win 2000- went to install xp- and I get the error: BSOD

Stop:0x0000007E (0xC0000005, OxF748E0BF, 0xF78DA208, 0xF78D9F08)

pci.sys- Address F748E0BF base at F7487000, datestamp 3b7d855c
It runs Win 2000 perfectly- when I start to upgrade to XP- it starts to install- reboots- and this is what I get. I figure it is hardware- but what? I can give specs on my build if necessary-

PLEASE HELP-
Thx
 

Relevancy 39.56%

I just put together a new computer W PSU Intel Core i Nehalem GHz OCZ Gold GB x GB -Pin Build BSOD New error DDR SDRAM DDR EVGA -BL-E -TR LGA Intel X ATX X SLI LE Intel Motherboard EVGA -P - -AR GeForce GTX Western Digital Caviar Black WD AALS GB Everything seemed to be in working order except I get bsod with the following error BCCode b BCP C BCP FFFFFADF FFAB BCP FFFFFADF D BCP OSVer SP Product New Build BSOD error C DOCUME ADMINI LOCALS Temp WER b dir M ini - dmp C DOCUME ADMINI LOCALS Temp WER b dir s ysdata xml I read the minidump and found this WARNING Unable to verify checksum for disk sys Could not read faulting driver name WARNING Unable to verify checksum for PartMgr sys WARNING Unable to verify checksum for fltmgr sys Probably caused by disk sys disk memmove Not sure where to go from here Im guessing its something with ram If i log into world of warcraft i get fps which i assume is linked to this I would appreciate any help I can get Edit Forgot to put cpu in spec nbsp

Relevancy 39.56%

Okay hopefully someone can shed some light on a number of bsod I've been having with a new build PC Specs below OS Windows Home Premium Bit CPU AMD Phenom II X Six Core T ghz Motherboard Gigabyte GA- GM-UD H AMD G DDR Memory OCZ Gold GB DDR PC - C MHZ x Graphics Card s MSI ATI Radeon HD Hard Drives WD Caviar Black TB Sata PSU W Coolermaster GX Case OCUK EZCool NA Case Cooling Arctic Cooling W7 on new BSOD PC Frequent build Freezer Pro v CPU In the space of - hours tonight I've had no less than BSODs all roughly within - minutes of one another They've happened when the system has been idle Frequent BSOD on new build W7 PC or when trying to play blu ray via arcsoft TotalMedia Theatre The system was built yesterday we put all W updates on it updated drivers etc etc with no problems although I'm not sure how long the system was Frequent BSOD on new build W7 PC on before we were restarting for updates etc We did have a lot of problems initially even trying to install Windows though - it kept complaining about missing files tried windows disks both legit - eventually we switched the memory setting in the bios from ganged to unganged and that let us install windows clonedvd and microsoft office without any issues Tonight I installed Total Media Theatre which also installed Total Media Server I have the exact same program running on my other PC no bsod with W although admittedly my other PC is older Also stuck on d Mark Began to run memory test receiving crazy error totals errors although memory is brand new We will probably have to start taking out sticks of memory to test if there's a bad one but in the meantime I thought it'd be worthwhile having someone check the dmp files I've quickly looked at them in BlueScreenView and they all point to ntoskrnl exe with the exception of the latest dump which cites win k sys - did a bit of googling but there seems to be no real info on ntoskrnl although I'm led to believe it's really just a generic error if windows doesn't understand what's causing the problem Oldest driver in the dmps seems to be secdrv sys but this is present on my other PC so I doubt that's causing the problem It looks to me like there's probably an issue with the memory so I'll look at that next but if there's any info to be gained from the dmp files I'd be really grateful to hear it Many thanks

A:Frequent BSOD on new build W7 PC

  
Quote: Originally Posted by thebawp


Okay, hopefully someone can shed some light on a number of bsod I've been having with a new build PC.

Specs below:

OS
Windows 7 Home Premium 64 Bit
CPU
AMD Phenom II X6 Six Core 1055T 2.8ghz
Motherboard
Gigabyte GA-880GM-UD2H AMD 880G DDR3
Memory
OCZ Gold 2GB DDR3 PC3-106666C9 1333MHZ x4
Graphics Card(s)
MSI ATI Radeon HD 5850
Hard Drives
WD Caviar Black 1TB Sata
PSU
550W Coolermaster GX550
Case
OCUK EZCool NA 705 Case
Cooling
Arctic Cooling Freezer 7 Pro v2.1 (CPU)

In the space of 2-3 hours tonight, I've had no less than 7 BSODs, all roughly within 20-30 minutes of one another. They've happened when the system has been idle, or when trying to play blu ray via arcsoft TotalMedia Theatre 5. The system was built yesterday, we put all W7 updates on it, updated drivers etc. etc with no problems, although I'm not sure how long the system was on before we were restarting for updates etc. We did have a lot of problems initially even trying to install Windows 7 though - it kept complaining about missing files (tried 2 windows disks both legit) - eventually we switched the memory setting in the bios from ganged to unganged and that let us install windows, clonedvd and microsoft office without any issues.

Tonight I installed Total Media Theatre which also installed Total Media Server. I have the exact same program running on my other PC (no bsod) with W7 although admittedly my other PC is older. Also stuck on 3d Mark 06.

Began to run memory test, receiving crazy error totals (40,000+ errors) although memory is brand new? We will probably have to start taking out sticks of memory to test if there's a bad one, but in the meantime I thought it'd be worthwhile having someone check the dmp files. I've quickly looked at them in BlueScreenView and they all point to ntoskrnl.exe with the exception of the latest dump, which cites win32k.sys - did a bit of googling but there seems to be no real info on ntoskrnl although I'm led to believe it's really just a generic error if windows doesn't understand what's causing the problem.

Oldest driver in the dmps seems to be secdrv.sys (2006) but this is present on my other PC so I doubt that's causing the problem.

It looks to me like there's probably an issue with the memory, so I'll look at that next, but if there's any info to be gained from the .dmp files I'd be really grateful to hear it!

Many thanks.



Blue Screen view isnt reliable. 6 of the 7 crashes point directly to Memory

http://www.sevenforums.com/bsod-help-support/135743-frequent-bsod-new-build-w7-pc.html
Relevancy 39.56%

So i just finished building a new pc, everything was fine for the first day. I stress tested all of the hardware and checked for errors. No problems. I then overclocked my processor and stabilized it (pretty easy on these new intel chips) and set up a game to download then went to bed.

When i woke up i was on the login screen and windows reported an unexpected shutdown.

I don't believe this is overclock related, i think it may be a driver or other hardware issue. One of the blue screen reports was something about a sata driver.

Ill run through the BSOD sticky steps now.

? OS - Windows 7 SP 1 64 bit
? Age of system- All new but the hard drives/dvd drive
? Age of OS installation -fresh format and reinstall with all updates
? CPU-i5 3570k
? Video Card-Radeon HD 6870
? MotherBoard-Gigabyte Z77X-UD3H
? Power Supply - Corsair TX650 watts

A:Brand new build BSOD

I dont see a way to edit, but based on benchmarks my hard drives are running 10-20 MB slower than they were in my last system.

Not sure whats going on there.

http://www.techsupportforum.com/forums/f299/brand-new-build-bsod-661042.html
Relevancy 39.56%

Help....

New system build, everything seemed to run fine, was running updates then on one of the restarts BSOD. windows would load then BSOD hits causing restart. Try windows restore, BSOD hits before it runs. I format hard drive and try booting from disc...BSOD. I can't do anything now without it hitting BSOD.

System specs,
ASUS P8Z77-V Deluxe MOBO
i5 3570 CPU
Corsair 2x4GB 1600MHz ram,
WD Blue 500gb HDD
ASUS GTX 670 DCU II vid card,
Antec HCG 620m PSU
Windows 7 HP 64 bit

Relevancy 39.56%

Hi All I'm having trouble with seemingly random BSOD's on my new build The specs are as follows MoBo Gigabyte PA A-UD -B CPU Intel Core i GHz GPU Asus Nvidia GT Memory x Crucial GB DDR PC - PCI Belkin Firewire Card OS Windows Home Premium -Bit The BSOD seems to be happening at random and the screen shows the following code STOP x E xFFFFFDFFFC xFFFFF XFFFFF A xFFFFF A I'm also occasionally getting a message saying my display adaptor has stopped working but has recovered which may point to the graphics card as the culprit I've tried memtest on the RAM and also sfc scannow but neither have returned any errors I've also updated my Bios and downloaded the latest graphics drivers from the NVidia website I have attached the dmp file from the latest crash in case this helps track down the issue I've looked New on BSOD STOP: 7E Build at it in WinDBG but I'm not sure how to interpret this Quote Microsoft R Windows Debugger Version AMD Copyright c Microsoft Corporation All rights reserved Loading Dump File C Windows Minidump - - dmp Mini Kernel Dump File Only registers and stack trace are available Symbol search path is Invalid Symbol loading may be unreliable without a symbol search path Use symfix to have the debugger choose a symbol path After BSOD STOP: 7E on New Build setting your symbol path use reload to refresh symbol locations Executable search path is Symbols can not be loaded because symbol path is not initialized The Symbol Path can be set by using the NT BSOD STOP: 7E on New Build SYMBOL PATH environment variable using the -y lt symbol path gt argument when starting the debugger using sympath and sympath Unable to load image SystemRoot system ntoskrnl exe Win error n WARNING Unable to verify timestamp for ntoskrnl exe ERROR Module load completed but symbols could not be loaded for ntoskrnl exe Windows Kernel Version MP procs Free x Product WinNt suite TerminalServer SingleUserTS Personal Built by amd fre win gdr - Machine Name Kernel base xfffff c PsLoadedModuleList xfffff e Debug session time Sat May UTC System Uptime days Symbols can not be loaded because symbol path is not initialized The Symbol Path can be set by using the NT SYMBOL PATH environment variable using the -y lt symbol path gt argument when starting the debugger using sympath and sympath Unable to load image SystemRoot system ntoskrnl exe Win error n WARNING Unable to verify timestamp for ntoskrnl exe ERROR Module load completed but symbols could not be loaded for ntoskrnl exe Loading Kernel Symbols Loading User Symbols Loading unloaded module list Bugcheck Analysis Use analyze -v to get detailed debugging information BugCheck E ffffffffc fffff fffff a fffff a Kernel symbols are WRONG Please fix symbols to do analysis Your debugger is not using the correct symbols In order for this command to work properly your symbol path must point to pdb files that have full type information Certain pdb files such as the public OS symbols do not contain the required information Contact the group that provided you with these symbols if you need this command to work Type referenced nt KPRCB Your debugger is not using the correct symbols In order for this command to work properly your symbol path must point to pdb files that have full type information Certain pdb files such as the public OS symbols do not contain the required information Contact the group that provided you with these symbols if you need this command to work Type referenced nt KPRCB Your debugger is not using the correct symbols In order for this command to work properly your symbol path must point to pdb files that have full type information Certain pdb files such as the public OS symbols do not contain the required information Contact the group that provided you with these symbols if you need this command to work Type referenced nt KPRCB Your debugger is not using the correct symbols In order for this command to work properly your symbol path must point to pdb files that have full type information Certain p... Read more

A:BSOD STOP: 7E on New Build

Sorry to double-post, couldn't find the edit button

Someone suggested to me elsewhere that one crash dump wasn't sufficient to diagnose this issue so I've attached an additional 5 dumps to this post.

Thanks,
Reilly

http://www.techsupportforum.com/forums/f299/bsod-stop-7e-on-new-build-572081.html
Relevancy 39.56%

System Info:

Windows 7 Ultimate 64-bit SP1
AMD Phenom II X4 955 Black Edition
Gigabyte GA-970A-UD3
Corsair 2x2GB DDR3 1333MHz
XFX HD 6870 1GB GDDR5
Samsung SpinPoint F3 500GB

Sometimes it's happened randomly, two or 3 times it's when im shutting down.

The other day my system crashed whilst watching a youtube video, but i think that was something to do with the flash video options. - Though come to think of it, it has messed up whilst i was watching something in vlc before...

Could really do with some proper help, only just built this system for my birthday(mid august) .

Relevancy 39.56%

Hi Guys New here but hoping for some help CPU- Core i k Graphics - Strix Ram gb vengeance DDR Hard drives- one SSD one internal HDD and two external HDD Motherboard gigabyte z G gaming I just built a brand new computer from scratch Every component is new except for the Strix graphics card I have spent hours trying to troubleshoot this myself with no luck I get random BSOD sometimes when browsing webpages or even when the computer is idle I generally get - BSOD *** randomly, NEW BUILD, BSOD a night What I have done so far Ran memtest and BSOD randomly, NEW BUILD, *** the first pass was fine with no errors Tried again the next day and found multiple errors Tried each ram slot with just a single stick of memory but could not find anymore errors I changed my BIOS from default quot Auto quot ram management and entered the timings per manufacturer spec I ran a video card memory test which passed My system runs cool not a heat problem I haven't tried playing any games yet Don't have any yet but I have ran D mark to stress the graphics card without a crash I would love it if someone could analyze the log and help point me in the right direction I am beyond frustrated- this is a new system and I have no idea what the problem may be Thanks John Zip file is attached

http://www.techsupportforum.com/forums/f299/bsod-randomly-new-build-1075674.html