Windows Support Forum

Special Pool Detected Memory Corruption

Q: Special Pool Detected Memory Corruption

W SP bit GB RAM I had a power outage and I'm now getting the above message BSOD I have booted with a boot disc and ran chkdsk R it found a few errors I booted into Corruption Detected Pool Memory Special Safe Mode once and that worked but I decided to run Check Disk again now it won't boot anymore It won't boot into Safe Mode stopping Special Pool Detected Memory Corruption at C windows system drivers disk sys Check Disk starts at every bootup From the boot disc in Command Prompt I ran FSUTIL Dirty Query the results is Drive is not Dirty I ran Memtest and the Special Pool Detected Memory Corruption Windows Memory test RAM tests Fine I booted off W DVD and try Startup Repair It said this disc cannot repair volume From the boot disc I tried to run Driver Verifier it said it was not a Valid Windows application Not sure if this has anything to do with it but I have HDD's and when booting from the Windows DVD or Boot disc it lists the Windows Volume is Drive G with Drive C as the System Reserve When the computer boots into Windows the Windows Volume is C I cannot boot into the computer to run diagnostic mode I cannot scan for Malware I cannot update drivers as I can't boot in Not sure what else I can try before I re-install

Relevancy 100%
Preferred Solution: Special Pool Detected Memory Corruption

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Special Pool Detected Memory Corruption

Try disconnecting the drives that do not have the Windows install and see if it's Id'd as the C drive almost sounds like MBR corruption?

http://www.techsupportforum.com/forums/f299/special-pool-detected-memory-corruption-616207.html
Relevancy 103.54%

Hi, trying to be quick before I BSOD again.

Recently had problems getting multiple BSODs, even though I haven't changed any hardware.

I got the aforementioned BSOD error and ran verifier to see the driver problem.

spqp.sys is the only one that came up that wasn't loaded it said "never loaded". I did a Windows Search for it and could not find it.

I don't know what to do know. Thanks in advance.

A:Special Pool detected memory corruption

Can you access the hard drive long enough to get a hold of the contents of the C:\Windows\Minidump folder? If so, zip it up and upload it to your next post.

What settings did you use when running Driver Verifier?

If the spqp.sys file was never loaded, then it's not likely to be a current problem. But a google for it doesn't reveal any results - which makes it suspicious IMO. Try posting over in the Malware forum for assistance: http://www.techsupportforum.com/f50/

http://www.techsupportforum.com/forums/f10/special-pool-detected-memory-corruption-366029.html
Relevancy 102.3%

Dear Tech Support,

I think my computer has serious problems. I don't know what is wrong with it because it is very fast and works very good. But something it just crashes out of the blue and gives me BSOD. Mostly the BSOD is Memory Management or IRQL not less or equal.

I have followed your BSOD Posting Instructions. The OS on this computer is Windows 7 (32 bit), before I had Windows Vista as standard OS on it. The computer is approximately 4 years old, with "Intel (R) Core? 2 Quad CPU Q6600 @ 2.40GHz 2.40 GHz" processor and 3 GB RAM Memory. I also have the output folder and perfmon file attachted to this thread.

Thanks in advance!
Okki

A:BSOD - Special pool detected memory corruption

I don't see any crashdumps. You aren't using any "cleaning" software are you? The problem with them is they'll clean up crashdumps, which we need to analyze (plus most of them can end up being harmful).

http://www.techsupportforum.com/forums/f299/bsod-special-pool-detected-memory-corruption-558616.html
Relevancy 102.3%

Im getting this BSOD lately when im playing games browsing on the memory BSOD special pool corruption detected internet and generaly by using the pc This is the report i have found in the event viewer - lt Event xmlns quot http schemas microsoft com win events event quot gt - lt System gt lt Provider Name quot BSOD special pool detected memory corruption Microsoft-Windows-Kernel-Power quot Guid quot C B A- - C BSOD special pool detected memory corruption -AC E- C D B quot gt lt EventID gt lt EventID gt lt Version gt lt Version gt lt Level gt lt Level gt lt Task gt lt Task gt lt Opcode gt lt Opcode gt lt Keywords gt x lt Keywords gt lt TimeCreated SystemTime quot - - T Z quot gt lt EventRecordID gt lt EventRecordID gt lt Correlation gt lt Execution ProcessID quot quot ThreadID quot quot gt lt Channel gt System lt Channel gt lt Computer gt Klavon-PC lt Computer gt lt Security UserID quot S- - - quot gt lt System gt - lt EventData gt lt Data Name quot BugcheckCode quot gt lt Data gt lt Data Name quot BugcheckParameter quot gt xfffff ff f lt Data gt lt Data Name quot BugcheckParameter quot gt xfffff ff lt Data gt lt Data Name quot BugcheckParameter quot gt xab a lt Data gt lt Data Name quot BugcheckParameter quot gt x lt Data gt lt Data Name quot SleepInProgress quot gt false lt Data gt lt Data Name quot PowerButtonTimestamp quot gt lt Data gt lt EventData gt lt Event gt If anyone knows something pls help me Also im using windows bit

A:BSOD special pool detected memory corruption

Please upload your full reports:http://www.techsupportforum.com/foru...ta-452654.html

-----

http://www.techsupportforum.com/forums/f299/bsod-special-pool-detected-memory-corruption-686212.html
Relevancy 102.3%

Hi,

I've been having lots of BSOD's and not been able to track down the issue.

Tried driver verifier and mem test on each ram stick but no issues.

Files attached. If anyone has any ideas I would be very grateful.

Thanks.

A:BSOD's - mostly special pool detected memory corruption

opps forgot specs:


OS- win 7 64
CPU - Intel i7-920
RAM - 6gb G.skill ripjaws
BOARD - Gigabyte ex58 ud3r
PSU - Corsair tx650
GFX - Ati 5770 HD 1GB PCI VaporX
HD - raid 0: 2 x Barracuda 7200.12 500GB S300

Cheers.

http://www.techsupportforum.com/forums/f299/bsods-mostly-special-pool-detected-memory-corruption-492993.html
Relevancy 102.3%

Today I installed my new SSD, and installed windows 8.1.  It worked for the first 3 hours, until I got the special pool detected memory corruption BSOD.  I looked at other forums, and  I did the Memtest, and it didn't work.  It started happening when I got my ssd, anyone have any ideas how to fix this?
EDIT: I fixed the problem

A:special pool detected memory corruption BSOD

Could you let us know what you did?
It'll help others who come looking for help with a similar problem.
Thanks!

http://www.bleepingcomputer.com/forums/t/582683/special-pool-detected-memory-corruption-bsod/
Relevancy 91.76%

I've been receiving a blue screen of death every once in a while, and on the blue screen it states "Special Pool Detected Memory Corruption", among other things. Any ideas on how to get rid of this? I have Windows XP. Let me know if I need to post more info.

Thanks
 

https://forums.techguy.org/threads/special-pool-detected-memory-corruption.838548/
Relevancy 85.87%

For the past few days I've been experiencing random BSODs The computer can be idle and still do it I've already ran memtest to see pool BSOD memory Special corruption - if my memory were faulty I did test them one at a time to be make sure and neither have any problems Vista Ultimate AMD Athlon X GB Ram BFG GTX Three hard drives The BSOD error shows the following Special Pool memory corruption x c xba ef xba eb x c x I also looked into the event viewer and these showed up as an error Event filter with query quot SELECT FROM InstanceModificationEvent WITHIN WHERE TargetInstance ISA quot Win Processor quot AND TargetInstance LoadPercentage gt quot could not be reactivated in namespace quot root CIMV quot because of error x Events cannot be delivered through this filter until the problem is corrected Log Name System Source EventLog Date AM Event ID Task Category None Level BSOD - Special pool memory corruption Error Keywords Classic User N A Computer ToNiX Description The previous system shutdown at AM on was unexpected Event Xml lt Event xmlns quot http schemas microsoft com win events event quot gt lt System gt lt Provider Name quot EventLog quot gt lt EventID Qualifiers quot quot gt lt EventID gt lt Level gt lt Level gt lt Task gt lt Task gt lt Keywords gt x lt Keywords gt lt TimeCreated SystemTime BSOD - Special pool memory corruption quot - - T Z quot gt lt EventRecordID gt lt EventRecordID gt lt Channel gt System lt Channel gt lt Computer BSOD - Special pool memory corruption gt ToNiX lt Computer gt lt Security gt lt System gt lt EventData gt lt Data gt AM lt Data gt lt Data gt lt Data gt lt Data gt lt Data gt lt Binary gt D D FA D D FA C C lt Binary gt I haven't done anything software hardware related in the past two or three weeks so I have no clue as to whats causing this I've included the dump file for the latest BSOD If there is anymore information that I can supply please let me know I greatly appreciate any help

A:BSOD - Special pool memory corruption

This is (most likely) a malware issue or a corrupted driver IMO. This is also a Driver Verifier enabled minidump - please include information such as this in future posts. Please describe, in detail, what you've attempted to do to fix the issue - including links to any other online work.

Also, it's not usually sufficient to diagnose a Blue Screen issue from just one mini-dump - so please include all minidumps when posting here.

Please post over in the malware forums to ensure that your system is clean. The reason for this is the unidentified driver apx1gadg.SYS The forums are located here: http://www.techsupportforum.com/f50/

Once assured that you're clean, then try this:

Check to see if you have a program called Counter Spy installed. If so, uninstall it (making sure that you have other protection available if that's the only one you have on your system). The BSOD points to sbapifs.sys - a component of Counter Spy.

Finally, once you've accomplished all of this, ENSURE that you've turned Driver Verifier off. Leaving it on will make the system more unstable.

Here's the analysis:

Code:
Microsoft (R) Windows Debugger Version 6.11.0001.404 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\Users\FUBAR-RC1-Desktop\TempDUMP\DATA\01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows Server 2008/Windows Vista Kernel Version 6002 (Service Pack 2) MP (2 procs) Free x86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 6002.18005.x86fre.lh_sp2rtm.090410-1830
Machine Name:
Kernel base = 0x82001000 PsLoadedModuleList = 0x8210e930
Debug session time: Thu Aug 13 05:41:48.028 2009 (GMT-4)
System Uptime: 0 days 2:06:57.900
Loading Kernel Symbols
...............................................................
................................................................
...................
Loading User Symbols
Loading unloaded module list
........
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck C1, {ba41ef78, ba41eb04, 83408c, 32}

Unable to load image \SystemRoot\system32\DRIVERS\sbapifs.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for sbapifs.sys
*** ERROR: Module load completed but symbols could not be loaded for sbapifs.sys
Probably caused by : sbapifs.sys ( sbapifs+a17a )

Followup: MachineOwner
---------

0: kd> !thread;!analyze -v;r;kv;lmtn;lmtsmn;.bugcheck;.logclose;q
GetPointerFromAddress: unable to read from 8212d6dc
THREAD 88d98250 Cid 0e38.15c8 Teb: 7ffdf000 Win32Thread: fc488e90 RUNNING on processor 0
IRP List:
Unable to read nt!_IRP @ b9f7ee00
Not impersonating
GetUlongFromAddress: unable to read from 82106b54
Owning Process 88d986c0 Image: SearchProtocolH
Attached Process N/A Image: N/A
ffdf0000: Unable to get shared data
Wait Start TickCount 488323
Context Switch Count 40
ReadMemory error: Cannot get nt!KeMaximumIncrement value.
UserTime 00:00:00.000
KernelTime 00:00:00.000
Win32 Start Address 0x00f3c799
Stack Init ad22c000 Current ad22bb48 Base ad22c000 Limit ad229000 Call 0
Priority 9 BasePriority 8 PriorityDecrement 0 IoPriority 2 PagePriority 5
ChildEBP RetAddr Args to Child
ad22b6dc 820c7f95 000000c1 ba41ef78 ba41eb04 nt!KeBugCheckEx+0x1e
ad22b7d4 820e5b98 ba41ef78 0000000... Read more

http://www.techsupportforum.com/forums/f299/bsod-special-pool-memory-corruption-404267.html
Relevancy 110.08%

Im always getting this BSOD error. Please help me identify the driver that is causing it.
Minidumps attached.
Thanks.

A:special pool detected memory corrupt BSOD

  
Quote: Originally Posted by ceril


Im always getting this BSOD error. Please help me identify the driver that is causing it.
Minidumps attached.
Thanks.


These crashes were caused by memory corruption (probably a driver). Please run these two tests to verify your memory and find which driver is causing the problem.

If you are overclocking anything reset to default before running these tests.
In other words STOP!!!
1-Memtest.





Quote:
*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

*Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

Any errors are indicative of a memory problem.

If a known good stick fails in a motherboard slot it is probably the slot.



RAM - Test with Memtest86+

2-Driver verifier






Quote:
I'd suggest that you first backup your data and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

In Windows 7 you can make a Startup Repair disk by going to Start....All Programs...Maintenance...Create a System Repair Disc - with Windows Vista you'll have to use your installation disk or the "Repair your computer" option at the top of the Safe Mode menu .

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to crash to the Blue Screen. Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).

If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.


Driver Verifier - Enable and Disable
Further Reading
Using Driver Verifier to identify issues with Windows drivers for advanced users

http://www.sevenforums.com/bsod-help-support/205159-special-pool-detected-memory-corrupt-bsod.html
Relevancy 90.73%

Hello folk of Windows 7 Support Forums,
I've been having a lot of issues lately. It is a custom build, and I made it around June of last year. Recently, (in the past week) I have been getting a lot of blue screens. At first, I was getting Page Fault in Non Paged Area, since update drivers, trying memtest, and driver verifier, it is beginning to frequently blue screen with Special Pool Detected. I am using Blue Screen View. I have ran Check Disk with no errors. Whenever I play games (such as Chivalry, League of Legends, etc) they crash as well. I have updated my Nvidia Graphics driver from the site. Any help would be thoroughly appreciated. My dump info is attached.

A:BSOD's Galore, Mostly Special Pool Detected

I forgot to mention that (according to BluescreenViewer) ntoskrnl.exe has been involved with every blue screen.

http://www.sevenforums.com/bsod-help-support/280926-bsods-galore-mostly-special-pool-detected.html
Relevancy 67.51%

I've been receiving BSODs several times a day during random tasks during low load high load etc I've replaced both memory modules with no success and switched slots with a single module with no success I suspect this is a software every Special Pool BSODs day and IRQL based issue because of this Any assistance would be so incredibly appreciated OS - Windows or Vista Windows x -bit or x x What was the original installed OS on the system Windows Is the OS an OEM version came pre-installed on system or full retail version YOU purchased it from retailer Full retail Approximate age of IRQL and Special Pool BSODs every day system hardware years Approximate age of OS installation if you know years Have you re-installed IRQL and Special Pool BSODs every day the OS No CPU i - k Video Card GTX MotherBoard if NOT a laptop GA-Z -D HP Power Supply - brand amp wattage if NOT a laptop Thermaltake TR w System Manufacturer N A Exact model number if laptop check label on bottom N A Laptop or Desktop Desktop

A:IRQL and Special Pool BSODs every day

It appears to me to be tied to VMWare and the usb port drivers try completely removing VMware and see if the bsod's stop.


Code:
2015 Jul 03 18:24:26 PM 98-dbug Sysnative BSOD scripts
……………………………………………………………………………………………………………………………………………

Code:
Debug session time: Wed Jul 1 00:43:02.180 2015 (UTC - 4:00)
Loading Dump File [C:\Bsodapp\SysnativeBSODApps\063015-10405-01.dmp]
Built by: 7601.18869.amd64fre.win7sp1_gdr.150525-0603
System Uptime: 0 days 0:00:19.070
*** WARNING: Unable to verify timestamp for hcmon.sys
*** ERROR: Module load completed but symbols could not be loaded for hcmon.sys
Probably caused by : hcmon.sys ( hcmon+6855 )
BugCheck A, {fffff980015acfd0, 2, 1, fffff8000278f9a8}
BugCheck Info: IRQL_NOT_LESS_OR_EQUAL (a)
Bugcheck code 0000000A
Arguments:
Arg1: fffff980015acfd0, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000001, bitfield :
bit 0 : value 0 = read operation, 1 = write operation
bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: fffff8000278f9a8, address which referenced memory
BUGCHECK_STR: 0xA
DEFAULT_BUCKET_ID: VERIFIER_ENABLED_VISTA_MINIDUMP
PROCESS_NAME: vmware-usbarbi
FAILURE_BUCKET_ID: X64_0xA_VRF_hcmon+6855
MaxSpeed: 3400
CurrentSpeed: 3392
BiosVersion = F5
BiosReleaseDate = 08/14/2013
SystemManufacturer = Gigabyte Technology Co., Ltd.
SystemProductName = Z87-D3HP
??????????????????????????????????????????????????????????????????????????????????????``
Debug session time: Wed Jul 1 00:41:03.463 2015 (UTC - 4:00)
Loading Dump File [C:\Bsodapp\SysnativeBSODApps\063015-9952-01.dmp]
Built by: 7601.18869.amd64fre.win7sp1_gdr.150525-0603
System Uptime: 0 days 2:32:38.353
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
Probably caused by : nvlddmkm.sys ( nvlddmkm+1c09c5 )
BugCheck C1, {fffff98034d66f60, fffff98034d66892, cb40a8, 32}
BugCheck Info: SPECIAL_POOL_DETECTED_MEMORY_CORRUPTION (c1)
Bugcheck code 000000c1
Arguments:
Arg1: fffff98034d66f60, address trying to free
Arg2: fffff98034d66892, address where one bit is corrupted
Arg3: 0000000000cb40a8, (reserved)
Arg4: 0000000000000032, caller is freeing an address where nearby bytes within the same page have a single bit error
BUGCHECK_STR: 0xC1_32
PROCESS_NAME: chrome.exe
FAILURE_BUCKET_ID: X64_0xC1_32_VRF_nvlddmkm+1c09c5
MaxSpeed: 3400
CurrentSpeed: 3392
BiosVersion = F5
BiosReleaseDate = 08/14/2013
SystemManufacturer = Gigabyte Technology Co., Ltd.
SystemProductName = Z87-D3HP
??????????????????????????????????????????????????????????????????????????????????????``
Debug session time: Tue Jun 30 22:07:44.384 2015 (UTC - 4:00)
Loading Dump File [C:\Bsodapp\SysnativeBSODApps\063015-9859-01.dmp]
Built by: 7601.18869.amd64fre.win7sp1_gdr.150525-0603
System Uptime: 0 days 0:32:37.274
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
Probably caused by : nvlddmkm.sys ( nvlddmkm+1c09c5 )
BugCheck C1, {fffff9802f65af30, fffff9802f65a592, 9340d8, 32}
BugCheck Info: SPECIAL_POOL_DETECTED_MEMORY_CORRUPTION (c1)
Bugcheck code 000000c1
Arguments:
Arg1: fffff9802f65af30, address trying to free
Arg2: fffff9802f65a592, address where one bit is corrupted
Arg3: 00000000009340d8, (reserved)
Arg4: 0000000000000032, caller is freeing an address where nearby bytes within the same page have a single bit error
BUGCHECK_STR: 0xC1_32
PROCESS_NAME: chrome.exe
FAILURE_BUCKET_ID: X64_0xC1_32_VRF_nvlddmkm+1c09c5
MaxSpeed: 3400
CurrentSpeed: 339... Read more

http://www.techsupportforum.com/forums/f299/irql-and-special-pool-bsods-every-day-1012834.html
Relevancy 65.79%

Hey guys I just [Pool Corruption] BSoD joined on here as I ve gotten a little tired of searching for BSoD [Pool Corruption] my specific issue But basically very recently I started getting blue screened and I can speculate that it had something to do with the visual basic compiler executable I don t personally use vbs but I was using the Python IDE at the time if I remember correctly it was a few weeks back now So anyway it s done it a few times since then and it s happened twice today to the point where I can t get any work done Apart from one out of the last they ve all been pool corruptions I will send you an example crash dump so you can tell me what you think I ll oblige with any more information you might need you need but only ask Bugcheck Analysis BAD POOL HEADER The pool is already corrupt at the time of the current request This may or may not be due to the caller The internal pool links must be walked to figure out a possible cause of the problem and then special pool applied to the suspect tags or the driver verifier to a suspect driver Arguments Arg the pool freelist is corrupt Arg fffff c d d the pool entry being checked Arg fffff c d d the read back flink freelist value should be the same as Arg fffff c c d the read back blink freelist value should be the same as Debugging Details ------------------ BUGCHECK STR x CUSTOMER CRASH COUNT DEFAULT BUCKET ID VISTA DRIVER FAULT PROCESS NAME Photoshop exe CURRENT IRQL LAST CONTROL TRANSFER from fffff f ea to fffff e c STACK TEXT fffff c f fffff f ea fffff c d d fffff c d d nt KeBugCheckEx fffff c fffff a ef fffff c fffff d c nt ExDeferredFreePool xc fffff c fffff c a fffff c e fffff c fffff c nt ExFreePoolWithTag x fffff c fffff df e fffff c e fffff fffff c e a fffff c e c win k InternalRebuildHwndListForIMEClass x c fffff c b fffff c f fffff c b win k BuildHwndList xb fffff c e fffff e fffffa b ecd fffff c a win k NtUserBuildHwndList x d fffff c a d c a nt KiSystemServiceCopyEnd x ecb x d c a STACK COMMAND kb FOLLOWUP IP nt ExDeferredFreePool c fffff f ea cc int SYMBOL STACK INDEX SYMBOL NAME nt ExDeferredFreePool c FOLLOWUP NAME Pool corruption IMAGE NAME Pool Corruption DEBUG FLR IMAGE TIMESTAMP MODULE NAME Pool Corruption FAILURE BUCKET ID X x nt ExDeferredFreePool c BUCKET ID X x nt ExDeferredFreePool c Followup Pool corruption --------- Thanks Laurence nbsp

A:BSoD [Pool Corruption]

I'll add that the process name (photoshop) is not the culprit as I've had a few that state the culprit is windows explorer. Also, the last crash I had was different and referred to a power issue.

*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

INTERNAL_POWER_ERROR (a0)
The power policy manager experienced a fatal error.
Arguments:
Arg1: 0000000000000001, Error Handling power IRP.
Arg2: 0000000000000006, The system has failed to allocate a necessary power irp.
Arg3: fffffa8003edb060, target device object
Arg4: 0000000000000000, system power irp

Debugging Details:
------------------
BUGCHECK_STR: 0xA0

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

PROCESS_NAME: System

CURRENT_IRQL: 0

LAST_CONTROL_TRANSFER: from fffff800031da600 to fffff800030d9c40

STACK_TEXT:
fffff880`033a84a8 fffff800`031da600 : 00000000`000000a0 00000000`00000001 00000000`00000006 fffffa80`03edb060 : nt!KeBugCheckEx
fffff880`033a84b0 fffff800`03321598 : 00000000`00000005 00000000`00000003 00000000`00000006 fffffa80`00000000 : nt!PopAllocateIrp+0xd0
fffff880`033a8530 fffff800`033218d8 : fffffa80`00000002 fffffa80`0413ade8 fffffa80`b5c945e0 fffffa80`b5c94340 : nt!PopNotifyDevice+0x88
fffff880`033a8580 fffff800`0332383f : 00000000`00000008 00000000`00000000 fffff880`033a8700 fffffa80`b5c94340 : nt!PopSleepDeviceList+0x148
fffff880`033a8650 fffff800`03323b2c : 00000000`00000004 00000000`00000006 00000000`00000000 00000000`00000001 : nt!PoBroadcastSystemState+0x27f
fffff880`033a86e0 fffff800`033257a7 : 00000000`00000000 00000000`00000001 00000000`00000000 00000000`00000004 : nt!PopSetDevicesSystemState+0x7c
fffff880`033a8730 fffff800`030d8ed3 : fffffa80`03ce8040 fffff780`00000300 00000000`00000007 fffff800`030bfe00 : nt!NtSetSystemPowerState+0x467
fffff880`033a8870 fffff800`030d5470 : fffff800`03547f00 00000000`00000000 fffff800`0327a200 fffff800`0327a200 : nt!KiSystemServiceCopyEnd+0x13
fffff880`033a8a08 fffff800`03547f00 : 00000000`00000000 fffff800`0327a200 fffff800`0327a200 00000000`00000000 : nt!KiServiceLinkage
fffff880`033a8a10 fffff800`035480dc : 00000000`00000000 fffff800`0327a200 00000000`00000002 fffffa80`03ce8000 : nt!PopIssueActionRequest+0x280
fffff880`033a8aa0 fffff800`0309709d : 00000000`00000001 fffffa80`03ce8000 fffffa80`0433a130 00000000`00000000 : nt!PopPolicyWorkerAction+0x4c
fffff880`033a8b00 fffff800`030e4001 : fffff800`00000002 fffff800`00000004 fffff800`03096fa0 00000000`00000000 : nt!PopPolicyWorkerThread+0xfd
fffff880`033a8b70 fffff800`03374fee : 9fffffbf`f7fffffe fffffa80`03ce8040 00000000`00000080 fffffa80`03c6a9e0 : nt!ExpWorkerThread+0x111
fffff880`033a8c00 fffff800`030cb5e6 : fffff880`031d7180 fffffa80`03ce8040 fffff880`031e1fc0 eeadfe5f`f2e9fded : nt!PspSystemThreadStartup+0x5a
fffff880`033a8c40 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KxStartSystemThread+0x16
STACK_COMMAND: kb

FOLLOWUP_IP:
nt!PopAllocateIrp+d0
fffff800`031da600 cc int 3

SYMBOL_STACK_INDEX: 1

SYMBOL_NAME: nt!PopAllocateIrp+d0

FOLLOWUP_NAME: MachineOwner

MODULE_NAME: nt

IMAGE_NAME: ntkrnlmp.exe

DEBUG_FLR_IMAGE_TIMESTAMP: 4e02aaa3

FAILURE_BUCKET_ID: X64_0xA0_nt!PopAllocateIrp+d0

BUCKET_ID: X64_0xA0_nt!PopAllocateIrp+d0

Followup: MachineOwner
---------
 

https://forums.techguy.org/threads/bsod-pool-corruption.1067126/
Relevancy 64.93%

my dell studio laptop has been consistently crashing since the past months On most occasions it never dumps the reason for hanging in any dump file luckily this time it has i have the analysed dump file but cannot seem to understand the cause i have run a memtest which ran without errors for one pass here are the details of the memory dump any help would be appreciated Microsoft R Windows Debugger Version AMD Copyright c Microsoft 7 (pool corruption) windows BSOD Corporation All rights reserved Loading Dump File C Windows Minidump - - dmp Mini Kernel Dump File Only registers and stack trace are available Symbol search path is srv windows 7 BSOD (pool corruption) c symbols http msdl microsoft com download symbols Executable search path is Windows Kernel Version Service Pack MP procs Free x Product WinNt suite TerminalServer SingleUserTS Built by amd fre win sp gdr - Machine Name Kernel base xfffff c PsLoadedModuleList xfffff e Debug session time Sun Mar UTC System Uptime days Loading Kernel Symbols Loading User Symbols Loading unloaded module list Bugcheck Analysis Use analyze -v to get detailed debugging information BugCheck windows 7 BSOD (pool corruption) C fffff dadb Probably caused by Pool Corruption nt ExDeferredFreePool Followup Pool corruption --------- kd gt analyze -v windows 7 BSOD (pool corruption) Bugcheck Analysis DRIVER CORRUPTED EXPOOL c An attempt was made to access a pageable or completely invalid address at an interrupt request level IRQL that is too high This is caused by drivers that have corrupted the system pool Run the driver verifier against any new or suspect drivers and if that doesn't turn up the culprit then use gflags to enable special pool Arguments Arg memory referenced Arg IRQL Arg value read operation write operation Arg fffff dadb address which referenced memory Debugging Details ------------------ BUGCHECK STR xC CURRENT IRQL FAULTING IP nt ExDeferredFreePool fffff dadb c cmp qword ptr rax r CUSTOMER CRASH COUNT DEFAULT BUCKET ID VISTA DRIVER FAULT PROCESS NAME System TRAP FRAME fffff -- trap xfffff NOTE The trap frame does not contain all registers Some register values may be zeroed or incorrect rax rbx rcx fffff e e rdx fffffa eae rsi rdi rip fffff dadb rsp fffff rbp r r fffffa eaf r r fffffa eb r r r r iopl nv up ei ng nz ac po cy nt ExDeferredFreePool x fffff dadb c cmp qword ptr rax r ds Resetting default scope LAST CONTROL TRANSFER from fffff c d e to fffff c dc STACK TEXT fffff fffff c d e a nt KeBugCheckEx fffff fffff c be f nt KiBugCheckDispatch x fffff fffff dadb fffffa d c fffff e e fffff e nt KiPageFault x fffff fffff dad a ffffff fffffa ad nt ExDeferredFreePool x fffff a fffff f e fffff a fffff c e fffff c nt ExFreePoolWithTag x fffff fffff f db fffff a fffffa f fffff c Ntfs NtfsCheckpointVolume x d fffff fffff f b fffff a fffffa f fffffa f fffffa c f Ntfs NtfsCheckpointAllVolumesWorker x b fffff a fffff f fffff a fffff f fffff c Ntfs NtfsForEachVcb x fffff a fffff c fffff e e fffff f fffffa dcf fffffa d Ntfs NtfsCheckpointAllVolumes xb fffff c fffff f fee e d fffffa dcf b fffffa cd nt ExpWorkerThread x fffff d fffff c f e fffff df e fffffa dcf b fffffa ce fffff nt PspSystemThreadStartup x a fffff d fffff fffff b fffff f b nt KxStartSystemThread x STACK COMMAND kb FOLLOWUP IP nt ExDeferredFreePool fffff dadb c cmp qword ptr rax r SYMBOL STACK INDEX SYMBOL NAME nt ExDeferredFreePool FOLLOWUP NAME Pool corruption IMAGE NAME Pool Corruption DEBUG FLR IMAGE TIMESTAMP MODULE NAME Pool Corruption FAILURE BUCKET ID X xC nt ExDeferredFreePool BUCKET ID X xC nt ExDeferredFreePool Followup Pool corruption

A:windows 7 BSOD (pool corruption)

NOTE: Please provide the following information for a more detailed response: http://www.techsupportforum.com/foru...ta-452654.html

While waiting for a reply:

I suggest starting all troubleshooting with the following diagnostic tests (located at this link: Hardware Diagnostics ). They'll save you a lot of time and heartache if there is a hardware failure, and you'll have the disks on hand in case you need them in the future:

Quote:




H/W Diagnostics:
Please start by running these bootable hardware diagnostics:
Memory Diagnostics (read the details at the link)
Hard Drive Diagnostics (read the details at the link) - Test ALL of the hard drives.

Also, please run one of these free, independent online malware scans to ensure that your current protection hasn't been compromised: Free Online AntiMalware Resources (read the details at the link)
There are also free, bootable antivirus disks at this link: Free Online AntiMalware Resources - Bootable Disks

http://www.techsupportforum.com/forums/f299/windows-7-bsod-pool-corruption-633914.html
Relevancy 64.93%

my dell studio 1555 laptop has been consistently crashing since the past 2 months. On most occasions it never dumps the reason for hanging in any dump file. luckily this time it has. i have the analysed dump file but cannot seem to understand the cause. i have run a memtest which ran without errors for one pass.
here are the details of the memory dump.
any help would be appreciated.

specs:
windows 7 ultimate x64
laptop originally came with windows vista which was 2 years ago
windows 7 was installed in march 2011, and reinstalled in feb 2012 hoping to solve the BSOD
antivirus used=avast 7

A:random BSOD (pool corruption)

Avast can be a contributing cause of BSOD'S . Please remove and replace with Microsoft Security Essentials AT LEAST TO TEST
http://files.avast.com/files/eng/aswclear5.exe

Microsoft Security Essentials - Free Antivirus for Windows

http://www.sevenforums.com/bsod-help-support/217585-random-bsod-pool-corruption.html
Relevancy 64.5%

Hi guys

I like to attempt and fix PC issues myself but this one is stumping me?

6 month old laptop - first BSOD i've had for years (my old 7yr old PC never)

BSODs seemingly randomly 3 different indicators seen- special pool error, unequal or equal error, page fault in unpaged area...

Attached are the details in the SF Diag zip


I have run memtest86- no issues
Simple MS debug offered TCPip.sys but driver normal
Have a full belarc profile summary too if required



Other issues lately- unsure if related - wifi dropping out/slow to connect

Hit 2 websites lately that were viral- caught by symantec but noted.

Everything else updated as required
I dont game
Do watch movies, etc

Any help pointers would be appreciated

Thanks
Trevor

A:BSODs- special pool, unequal or equal error, page fault...help please!

Are you able to Up Date Windows?

http://www.sevenforums.com/bsod-help-support/243414-bsods-special-pool-unequal-equal-error-page-fault-help-please.html
Relevancy 64.5%

hi

i attached report for review and hope can find solution for this error.

thanks

A:BSOD Pool Corruption In File Area

BSOD Crashes and Debugging - Windows 8 Forums

http://www.sevenforums.com/bsod-help-support/353046-bsod-pool-corruption-file-area.html
Relevancy 62.78%

I'm getting BSOD's almost once a day. It's my work computer, so I run the same apps everyday, but I haven't noticed any kind of trend that would lead me to believe a specific app was causing it. From the little bit I've gathered and read, it seems to be a memory issue though. Can anyone confirm or investigate to determine the cause? Zip is attached.

Thanks in advance!

A:Random BSODs tdax.sys, ntkrnlmp.exe (spoolsv.exe), Pool Corruption...

Updated attached file.

http://www.sevenforums.com/bsod-help-support/356067-random-bsods-tdax-sys-ntkrnlmp-exe-spoolsv-exe-pool-corruption.html
Relevancy 58.91%

Hi all,

I have a long history of BSOD's with this computer during startup but I eventually discovered (also with the help of this forum) that they were caused by my DeathAdder mouse. BSOD's during startup have vanished.

Instead, they have been replaced with BSOD's during the use of Skype, Microsoft Word, LOTRO or anything else I might have running. There's no pattern that I can discern except the BSOD's originate under the Special Pool flag. I have previously turned on Driver Verifier to help get some additional detail in my dump files.

At this point, the best I can tell the BSODs point to my Webcam and NVIDIA drivers both of which are absolutely current and have been so for some time. I've reached the point where I need some assistance from someone with a lot more expertise in parsing out system info.

Thanks in advance for the help!

A:Random "Special Pool" BSOD's During General Use

Welcome
Your reports seem to point to your webcam. Go to the corporate website and update the driver
Lvrs64.sys file descriptionProductname:Logitech Webcam Software Description:Logitech Kernel Audio Improvement Filter Driver Company:Logitech Inc.
If the drivers are current as you say, try to roll them back.

http://www.sevenforums.com/bsod-help-support/246156-random-special-pool-bsods-during-general-use.html
Relevancy 55.9%

I believe I've a corrupt file system/registry. The windows explorer hangs a lot. Accessing files in drives takes too long. Ran Malwarebytes, NOD32 online scanner. It's all clean. SFC doesn't run.

So, I've run SFCfix.exe & attached the generated SFCfix.txt. I've also attached CBS.zip. Please help.

http://www.sevenforums.com/performance-maintenance/384353-sfcfix-surt-total-detected-corruption-count-113-a.html
Relevancy 55.47%

Can the laptop handle 2 8GB dimms for a total of 16 instead of how it is sold with 8. The laptop would be viable but the memory is holding it back.

A:Inspiron 17R Special Edition Memory

Hi,
Welcome to the community.
Well, Dell does not recommend 2 sticks of 8 GB RAM each installed in this system as that may cause a motherboard failure. However installing 8 GB, 1600 MHZ chips may or may not work.
Let me know in case there are any other concerns. Glad to be of assistance.
Thanks & Regards
Dell_Chiranjeev_S
Dell Social Media Responder

http://en.community.dell.com/support-forums/laptop/f/3518/t/19459330
Relevancy 55.47%

I've previously posted for help under quot Performance amp Maintenance quot I thought it would be more appropriate to ask for help here I believe I've a corrupt file system registry The windows explorer hangs a lot I've a hard time accessing files on the hard drive Ran Malwarebytes NOD online scanner It's all clean SFC doesn't run So I've run SFCfix exe amp attached the most recent version of SFCfix txt amp CBS zip I've attempted some repairs by running Windows Update Readiness tool looking at CHECKSUR log by downloading the individual updates mentioned in the log placing them in C windows temp checksur packages folder and running WURT again amp the summary of checksur log reads Seconds executed Found errors CSI Manifest All Zeros Total count CSI Payload File Missing Total count CSI Payload File Corrupt Total count CBS corruption 106 - Windows 7: SURT SFCfix detected count: total MUM Missing Total count CBS MUM Corrupt Total count CBS Catalog Missing Total count CBS Catalog Corrupt Total count CBS Registry Error Total count CBS Watchlist Package Missing Total count Unavailable repair files winsxs manifests x microsoft-windows-packager bf ad e none f c f manifest winsxs manifests x microsoft-windows-packager bf ad e none Windows 7: SFCfix - SURT total detected corruption count: 106 eff f Windows 7: SFCfix - SURT total detected corruption count: 106 f bb manifest servicing packages Gin IP-Microsoft-Windows-DownlevelApisets-Com-WinIP-Package bf ad e x ja-JP mum servicing packages Gin IP-Microsoft-Windows-DownlevelApisets-Com-WinIP-Package bf ad e x ja-JP mum servicing packages Microsoft-Windowc-PlatformUpdate-Win -SRV R -Package bf ad e x tr-TR mum servicing packages Microsoft-Windowc-PlatformUpdate-Win -SRV R -Package bf ad e x tr-TR mum servicing packages Microsoft-Windows-UIAnimation-WinIP-Package bf ad e x tr-TR mum servicing packages Package for KB bf ad e x mum servicing packages Package for KB bf ad e x mum servicing packages Package for KB bf ad e x mum servicing packages Package for KB bf ad e x mum servicing packages Win IP-Microsoft-Windows-DownlevelApisets-Com-WinIP-Package bf ad e x uk-UA mum servicing packages Win IP-Microsoft-Windows-DownlevelApisets-Windows-WinIP-Package bf ad e x sv-SE mum servicing packages Win IP-Microsoft-Windows-DownlevelApisets-WinIP-Package bf ad e x hr-HR mum servicing packages Win IP-Microsoft-Windows-Graphics-Package bf ad e x pt-BR mum servicing packages WUClient-SelfUpdate-Core-CoreComp bf ad e x en-US mum servicing packages Microsoft-Windows-PlatformUpdate-Win -SRV R -Package bf ad e x tr-TR mum servicing packages Win IP-Microsoft-Windows-DownlevelApisets-Base-WinIP-Package bf ad e x uk-UA mum servicing packages Win IP-Microsoft-Windows-DownlevelApisets-Com-WinIP-Package bf ad e x ja-JP mum servicing packages Gin IP-Microsoft-Windows-DownlevelApisets-Com-WinIP-Package bf ad e x ja-JP cat servicing packages Gin IP-Microsoft-Windows-DownlevelApisets-Com-WinIP-Package bf ad e x ja-JP cat servicing packages Microsoft-Windowc-PlatformUpdate-Win -SRV R -Package bf ad e x tr-TR cat servicing packages Microsoft-Windowc-PlatformUpdate-Win -SRV R -Package bf ad e x tr-TR cat servicing packages Microsoft-Windows-UIAnimation-WinIP-Package bf ad e x tr-TR cat servicing packages Package for KB bf ad e x cat servicing packages Package for KB bf ad e x cat servicing packages Package for KB bf ad e x cat servicing packages Package for KB bf ad e x cat servicing packages Win IP-Microsoft-Windows-DownlevelApisets-Com-WinIP-Package bf ad e x uk-UA cat servicing packages Win IP-Microsoft-Windows-DownlevelApisets-Windows-WinIP-Package bf ad e x sv-SE cat servicing packages Win IP-Microsoft-Windows-DownlevelApisets-WinIP-Package bf ad e x hr-HR cat servicing packages Win IP-Microsoft-Windows-Graphics-Package bf ad e x pt-BR cat servicing packages WUClient-SelfUpdate-Core-CoreComp bf ad e x en-US cat servicing packages Microsoft-Windows-PlatformUpdate-Win -SRV R -Package bf ad e x tr-TR cat servicing package... Read more

http://www.sevenforums.com/windows-updates-activation/384484-windows-7-sfcfix-surt-total-detected-corruption-count-106-a.html
Relevancy 55.04%

Hi

I'm getting bad pool caller blue screen crashes on a regular basis and now also DRIVER VERIFIER DETECTED VIOLATION

any help would be fantastic

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft® Windows Vista™ Home Premium, Service Pack 2, 32 bit
Processor: Intel(R) Core(TM)2 CPU T5200 @ 1.60GHz, x64 Family 6 Model 15 Stepping 6
Processor Count: 2
RAM: 3061 Mb
Graphics Card: Mobile Intel(R) 945 Express Chipset Family, 256 Mb
Hard Drives: C: Total - 93893 MB, Free - 55814 MB;
Motherboard: Intel Corporation, CAPELL VALLEY(NAPA) CRB
Antivirus: ESET Smart Security 5.2, Updated and Enabled
 

https://forums.techguy.org/threads/bad-pool-caller-and-driver-verifier-detected-violation-vista.1068360/
Relevancy 54.61%

Hi my neighbour has just shown me her tablet which is showing the following error which appeared after she accessed Facebook.
 
http://7811786.com
***** Don't restart your computer *****
WIndows Detected Hard Drive Data Corruption.
This indicates that some recent downloads on the computer has created problems on the computer.
 
Call technical support (0800) 802 1389 and share this code S4AW2 with the Agent to fix the issue.
 
 
I was surprised when she said she had rung the number and they were unable to help.  I presumed it was ransomware and they would want money.
 
Can anyone help please?  Is this genuine?  What are the next steps?
 
Thanks

A:Error Message Windows Detected Hard Drive Data Corruption

Hi jen000 This is what we call a technical support scam. Basically a fake alert pops-up in the web browser, stating that your system/computer is having an issue and it asks you to call a certain number. However the person that will answer and "assist" you is a scammer that will try to sell you an overpriced solution that is basically useless since you aren't affected by the problem in the pop-up. For more information, read the following post by quietman.http://www.bleepingcomputer.com/forums/t/407147/answers-to-common-security-questions-best-practices/#entry3897161

http://www.bleepingcomputer.com/forums/t/625445/error-message-windows-detected-hard-drive-data-corruption/
Relevancy 54.61%

I am in the process of developing an Access 2003 application, and almost done. While I was fixing some errors with controls on one of the reports, seems like the database corrupted. Now, I keep getting "microsoft office access has detected corruption in this file....etc". It instructs me to Compact & Repair, but when I get the same error message when I try that. If I open a blank database & try to import objects from the corrupted database, I cannot access/view the objects of the corrupted file from the blank database. Unfortunately, I dont have a backup of the file, I can try to restore to an earlier storage point (using System Restore), but will lose considerable work. Any ideas?
 

https://forums.techguy.org/threads/how-to-fix-error-in-database-microsoft-office-access-has-detected-corruption-in-this-file.1154046/
Relevancy 54.18%

Windows XP Service Pack I m using a beta version of Soundbooth and Adobe personnel asked me to temporarily disable C windows system nvoglnt dll and try Memory Corruption to open a video after renaming this file and starting their software holding the shift key down Well their software responded perfectly I then went back and changed the file back to the normal name After this I did a restart on the computer When it was shut down I got the blue screen and when it booted up I got the quot this computer has recovered from a serious system error quot message I read through the posts here and thanks to USASMA downloaded the Windbg program and came up with the following report and I don t understand any of it and don t know what to do Looking for some advise Thanks Microsoft reg Windows Debugger Version X Copyright copy Microsoft Corporation All rights reserved Loading Dump File C WINDOWS Minidump Mini - dmp Mini Kernel Dump File Only registers and stack trace are available Symbol search path is SRV Memory Corruption c symbols http msdl microsoft com download symbols Executable search path is Windows XP Kernel Version Service Pack MP procs Free x compatible Product WinNt suite TerminalServer SingleUserTS Built by xpsp sp gdr - Machine Name Kernel base x d PsLoadedModuleList x d Debug session time Wed Feb GMT- System Uptime days Loading Kernel Symbols Loading User Symbols Loading unloaded module list Bugcheck Analysis Use analyze -v to get detailed debugging information BugCheck E Probably caused by memory corruption Followup memory corruption --------- kd gt analyze -v Bugcheck Analysis PFN LIST CORRUPT e Typically caused by drivers passing bad memory descriptor lists ie calling MmUnlockPages twice with the same list etc If a kernel debugger is available get the stack trace Arguments Arg A PTE or PFN is corrupt Arg page frame number Arg current page state Arg Debugging Details ------------------ BUGCHECK STR x E PFN PAGE SINGLE BIT ERROR Bugcheck args and differ by a bit its hardware error MEMORY CORRUPTOR ONE BIT CUSTOMER CRASH COUNT DEFAULT BUCKET ID DRIVER FAULT PROCESS NAME rundll exe LAST CONTROL TRANSFER from ddc to f f STACK TEXT b b ddc e nt KeBugCheckEx x b b b a a c a ddf nt MiDecrementShareCount x a b b cc b bf a ddda ffff nt MiDeleteValidAddress x b b ec f a ddda a dded a ddda nt MiDeleteAddressesInWorkingSet x b b d ddda d nt MmCleanProcessAddressSpace x b b c d f b b c ff f nt PspExitThread x b b cc ff f d b b b b c nt PsExitSpecialApc x b b c b b nt KiDeliverApc x af b b c c e f b b nt KiServiceExit x WARNING Frame IP not in any known module Following frames may be wrong fb x c e f STACK COMMAND kb FOLLOWUP NAME memory corruption MODULE NAME memory corruption IMAGE NAME memory corruption DEBUG FLR IMAGE TIMESTAMP FAILURE BUCKET ID MEMORY CORRUPTION ONE BIT BUCKET ID MEMORY CORRUPTION ONE BIT Followup memory corruption --------- kd gt analyze -v Bugcheck Analysis PFN LIST CORRUPT e Typically caused by drivers passing bad memory descriptor lists ie calling MmUnlockPages twice with the same list etc If a kernel debugger is available get the stack trace Arguments Arg A PTE or PFN is corrupt Arg page frame number Arg current page state Arg Debugging Details ------------------ BUGCHECK STR x E PFN PAGE SINGLE BIT ERROR Bugcheck args and differ by a bit its hardware error MEMORY CORRUPTOR ONE BIT CUSTOMER CRASH COUNT DEFAULT BUCKET ID DRIVER FAULT PROCESS NAME rundll exe LAST CONTROL TRANSFER from ddc to f f STACK TEXT b b ddc e nt KeBugCheckEx x b b b a a c a ddf nt MiDecrementShareCount x a b b cc b bf a ddda ffff nt MiDeleteValidAddress x b b ec f a ddda a dded a ddda nt MiDeleteAddressesInWorkingSet x b b d ddda d nt MmCleanProcessAddressSpace x b b c d f b b c ff f nt PspExitThread x b b cc ff f d b b b b c nt PsExitSpecialApc x b b c b b nt KiDeliverApc x af b b c c e f b b nt KiServiceExit x WARNING Frame IP not in any known module Following frames may be wrong fb x c e f STACK COMMAND kb FOLLOWUP NAME memory corrupti... Read more

A:Memory Corruption

http://www.bleepingcomputer.com/forums/t/197882/alcmtrexe-alcwzrdexe/In order to avoid confusion, and make the best use of the limited amount of malware removal helpers and their own limited amount of time, this topic is closed. Please do not post in more than one forum, and if you have more topics open elsewhere, please ask that they be closed. Thank you for your cooperation and understanding.Bleeping Computer Staff

http://www.bleepingcomputer.com/forums/t/200744/memory-corruption/
Relevancy 54.18%

I ve had two crashes today this morning and tonight Both had identical crash dumps Here is what I got from the debugger Code WRITE ADDRESS f CURRENT IRQL FAULTING IP nt MiInsertPageInFreeList f fffff b a mov r x rdi CUSTOMER CRASH COUNT DEFAULT BUCKET ID DRIVER FAULT BUGCHECK STR xA LAST CONTROL TRANSFER from fffff b to fffff STACK TEXT fffffadf e e fffff b a Memory Corruption? f nt KeBugCheckEx fffffadf e e fffff ffffffff ad fffffadf e db d nt KiBugCheckDispatch Memory Corruption? x fffffadf e e fffff b a fffffadf e e a fffffadf e e a fffffadf e e fffffadf e ccfd nt KiPageFault x fffffadf e e a fffff dc eb a fffff f nt MiInsertPageInFreeList x f fffffadf e e fffff dd a a fffff fb fffffadf fadf e df a nt MiDeletePte x fb fffffadf e e c fffff cf fffffadf f fff fffffadf e eabf nt MiDeleteVirtualAddresses x ef fffffadf e e b fffff d ffffffff ffffffff fffffadf e e cf ef d nt NtFreeVirtualMemory xac fffffadf e e c ef a nt KiSystemServiceCopyEnd x ae c x ef a STACK COMMAND bugcheck kb FOLLOWUP IP nt MiInsertPageInFreeList f fffff b a mov r x rdi FAULTING SOURCE CODE SYMBOL STACK INDEX FOLLOWUP NAME MachineOwner SYMBOL NAME nt MiInsertPageInFreeList f MODULE NAME nt DEBUG FLR IMAGE TIMESTAMP cf IMAGE NAME memory corruption FAILURE BUCKET ID X xA W nt MiInsertPageInFreeList f BUCKET ID X xA W nt MiInsertPageInFreeList f Followup MachineOwner --------- I ran a test of the ram with DocMemory and it went through loops without a problem The question is whether this is a hardware of software problem nbsp

A:Memory Corruption?

While I do not expect a finite answer to my question, surely someone can shed at least a ray of light on this.

After posting this thread, I later received an error dialog that Cacheman had experienced a software error and it shutdown, without a BSOD. I cannot recall the terminology now, but it made me think that it might be linked to the BSODs that do regards memory functions. I left it shutdown to see, but I then started getting more frequent crashes. At this point, I have a hunch that Cacheman may be helping instead.

If no one has a solution, at least point me in a direction that I might find it myself.
 

https://forums.techguy.org/threads/memory-corruption.494797/
Relevancy 54.18%

I just found out I got some memory corruption I been trying to get windows update to work and I was told by Flavius and woundering how I could fix this I been getting some bluescreens Windows Update wont update and minor stuff wont save like to have the desktop on the toolbar Code Microsoft R Windows Debugger Version AMD Copyright c Microsoft Corporation All rights reserved Loading Dump File G Memory Corruption Folder MEMORY DMP Kernel Summary Dump File Only kernel address Memory Corruption space is available Symbol search path is SRV G SymCache http msdl microsoft com download symbols Executable search path is Windows Kernel Version MP procs Free x Product WinNt suite TerminalServer SingleUserTS Personal Built by amd fre win gdr - Machine Memory Corruption Name Kernel base xfffff PsLoadedModuleList xfffff e Debug session time Wed Sep GMT System Uptime days Loading Kernel Symbols Loading User Symbols PEB is paged out Peb Ldr fffdf Type quot hh dbgerr quot for details Loading unloaded module list Bugcheck Memory Corruption Analysis Use analyze -v to get detailed debugging information BugCheck E b b PEB is paged out Peb Ldr fffdf Type quot hh dbgerr quot for details PEB is paged out Peb Ldr fffdf Type quot hh dbgerr quot for details Probably caused by memory corruption nt MiBadShareCount c Followup MachineOwner --------- kd gt analyze -v Bugcheck Analysis PFN LIST CORRUPT e Typically caused by drivers passing bad memory descriptor lists ie calling MmUnlockPages twice with the same list etc If a kernel debugger is available get the stack trace Arguments Arg A PTE or PFN is corrupt Arg b page frame number Arg current page state Arg b Debugging Details ------------------ PEB is paged out Peb Ldr fffdf Type quot hh dbgerr quot for details PEB is paged out Peb Ldr fffdf Type quot hh dbgerr quot for details BUGCHECK STR x E DEFAULT BUCKET ID VISTA DRIVER FAULT PROCESS NAME SC exe CURRENT IRQL LAST CONTROL TRANSFER from fffff bc to fffff c STACK TEXT fffff bec f fffff bc e b nt KeBugCheckEx fffff bec f fffff fffff ecc nt MiBadShareCount x c fffff bec f fffff b fffffa a e fffff c f fffffff fffff a b ecbf nt FNODOBFM string' x c fffff bec fffff a fffffa a e fffffa fffff c fffff b nt MiDeleteAddressesInWorkingSet x fffff bec b fffff abc f fffff a c fffff bec c fffffa b f nt MmCleanProcessAddressSpace x fffff bec fffff d fd d fffffa c f nt PspExitThread x f fffff bec c fffff a e fffff c fbce fffff fffff nt PsExitSpecialApc x d fffff bec f fffff a f fe fffff bec a fffff dc nt KiDeliverApc x eb fffff bec a fffff c f fffff bec ca fffff d fa a nt KiInitiateUserApc x fffff bec bb dd nt KiSystemServiceExit x c e f f x dd STACK COMMAND kb FOLLOWUP IP nt MiBadShareCount c fffff bc cc int SYMBOL STACK INDEX SYMBOL NAME nt MiBadShareCount c FOLLOWUP NAME MachineOwner MODULE NAME nt DEBUG FLR IMAGE TIMESTAMP b cfeb IMAGE NAME memory corruption FAILURE BUCKET ID X x E nt MiBadShareCount c BUCKET ID X x E nt MiBadShareCount c Followup MachineOwner --------- kd gt analyze -v Bugcheck Analysis PFN LIST CORRUPT e Typically caused by drivers passing bad memory descriptor lists ie calling MmUnlockPages twice with the same list etc If a kernel debugger is available get the stack trace Arguments Arg A PTE or PFN is corrupt Arg b page frame number Arg current page state Arg b Debugging Details ------------------ PEB is paged out Peb Ldr fffdf Type quot hh dbgerr quot for details PEB is paged out Peb Ldr fffdf Type quot hh dbgerr quot for details BUGCHECK STR x E DEFAULT BUCKET ID VISTA DRIVER FAULT PROCESS NAME SC exe CURRENT IRQL LAST CONTROL TRANSFER from fffff bc to fffff c STACK TEXT fffff bec f fffff bc e b nt KeBugCheckEx fffff bec f fffff fffff ecc nt MiBadShareCount x c fffff bec f fffff b fffffa a e fffff c f fffffff fffff a b ecbf nt FNODOBFM string' x c fffff bec fffff a fffffa a e fffffa fffff c fffff b nt MiDeleteAddressesInWorkingSet x fffff bec b fffff abc f fffff a c fffff bec c fffffa b f nt MmCleanProcessAddressSpace x fffff bec fffff d fd d ... Read more

A:Memory Corruption

No,
It sounds like an infection. Try doing a complete system scan using Malwarebytes and Spybot S&D.

These should yeild some nasties hiding on your HDD.

Let us know what it finds,
Ben

http://www.sevenforums.com/bsod-help-support/108723-memory-corruption.html
Relevancy 54.18%

Please Advice Microsoft reg Windows Debugger Version AMD Copyright copy Microsoft Corporation All rights reserved Loading Dump File C Users JinXiang Desktop - - Memory Corruption?! dmp Mini Kernel Dump File Only registers and stack trace are available Symbol Path validation summary Response Time ms Location Deferred SRV C SymCache http msdl microsoft com download symbols Symbol search path is SRV C SymCache http msdl microsoft com download symbols Executable search path is Windows Memory Corruption?! Kernel Version MP procs Free x Product WinNt suite TerminalServer SingleUserTS Personal Built by amd fre win gdr - Machine Name Kernel base xfffff dd f PsLoadedModuleList xfffff dd dbaa Debug session time Mon Aug UTC System Uptime days Loading Memory Corruption?! Kernel Symbols Press ctrl-c cdb kd ntsd or ctrl-break windbg to abort symbol loads that take too long Run sym noisy before reload to track down problems loading symbols Loading User Symbols Loading unloaded module list Bugcheck Analysis Use analyze -v to get detailed debugging information BugCheck B c fffff e fffff d f Probably caused by memory corruption Followup memory corruption --------- kd gt analyze -v Bugcheck Analysis SYSTEM SERVICE EXCEPTION b An exception happened while executing a system service routine Arguments Arg c Exception code that caused the bugcheck Arg fffff e Address of the instruction which caused Memory Corruption?! the bugcheck Arg fffff d f Address of the context record for the exception that caused the bugcheck Arg zero Debugging Details ------------------ DUMP FILE ATTRIBUTES x Kernel Generated Triage Dump EXCEPTION CODE NTSTATUS xc - The instruction at x lx referenced memory at x lx The memory could not be s FAULTING IP netbt NbtReadRegistry fffff e add byte ptr rax al CONTEXT fffff d f -- cxr xfffff d f r rax rbx rcx fbb b rdx fffff d a b rsi ffffffff c rdi fffff d a rip fffff e rsp fffff d a rbp fffff d a r fffff a ab r r fffff dd d r fffffa r fffffa d e r fffff d a r r fffffa ff e iopl nv up ei ng nz ac pe cy cs ss ds b es b fs gs b efl netbt NbtReadRegistry x fffff e add byte ptr rax al ds b Last set context rax rbx rcx fbb b rdx fffff d a b rsi ffffffff c rdi fffff d a rip fffff e rsp fffff d a rbp fffff d a r fffff a ab r r fffff dd d r fffffa r fffffa d e r fffff d a r r fffffa ff e iopl nv up ei ng nz ac pe cy cs ss ds b es b fs gs b efl netbt NbtReadRegistry x fffff e add byte ptr rax al ds b Resetting default scope CUSTOMER CRASH COUNT DEFAULT BUCKET ID CODE CORRUPTION BUGCHECK STR x B PROCESS NAME svchost exe CURRENT IRQL ANALYSIS VERSION debuggers dbg - amd fre LAST CONTROL TRANSFER from fffff e aa to fffff e STACK TEXT fffff d a fffff e aa c c netbt NbtReadRegistry x fffff d a f fffff e c fffff a d de fffff d a f fffffa ff c b fffffa aa netbt LookupDeviceInRegistry x a fffff d a fffff e e fffffa c fffffa ff c b fffffa c fffffa c netbt DispatchIoctls x fffff d a fffff dd fffffa f b fffffa ff c b fffff d a b netbt NbtDispatchDevCtrl x e fffff d a fffff dd f fb nt IopXxxControlFile x e fffff d a a fffff dd bb f eaa fffff d a aa nt NtDeviceIoControlFile x fffff d a a fb f b a nt KiSystemServiceCopyEnd x f f f x fb f b a CHKIMG EXTENSION chkimg -lo -d netbt fffff e -fffff e bytes - netbt NbtReadRegistry f e da d da fffff e -fffff e f bytes - netbt NbtReadRegistry x f c fffff e -fffff e bytes - netbt NbtReadRegistry x a f d e fffff e -fffff e f bytes - netbt NbtReadRegistry x b c c f d fffff e -fffff e b bytes - netbt NbtReadRegistry x b b f f f fffff e e-fffff e a bytes - netbt NbtReadRegistry e x c b d b fffff e a - netbt NbtReadRegistry x fffff e a -fffff e bb bytes - netbt NbtReadRegistry x b e ff fffff e be-fffff e d bytes - netbt NbtReadRegistry e x b b c errors netbt fffff e -fffff e d MODULE NAME memory corruption IMAGE NAME memory corruption FOLLOWUP NAME memory corruption DEBUG FLR IMAGE TIMESTAMP MEMORY CORRUPTOR LARGE STACK COMMAND cxr xfffff d f kb FAILURE BUCKET ID MEMORY CORRUPTION LARGE BUCKET ID MEMORY C... Read more

Relevancy 54.18%

evening guys been having a few random hard locks over the last week or so - mainly while gaming now not or Memory else? corruption something everyone bsods in fact a couple of them have just rebooted the system without a bsod i have attached the dump files i have related to these crashes and the bsod Memory corruption or something else? screen via bluescreenreview - apologies if this is wrong Code Microsoft R Memory corruption or something else? Windows Debugger Version AMD Copyright c Microsoft Corporation All rights reserved Loading Dump File C Windows Minidump - - dmp Mini Kernel Dump File Only registers and stack trace are available Symbol search path is SRV C SymCache Symbol information Executable search path is Windows Kernel Version MP procs Free x Product WinNt suite TerminalServer SingleUserTS Built by amd fre win gdr - Machine Name Kernel base xfffff e f PsLoadedModuleList xfffff ce Debug session time Sun Jan UTC System Uptime days Loading Kernel Symbols Loading User Symbols Loading unloaded module list Bugcheck Analysis Use analyze -v to get detailed debugging information BugCheck E cdfb cddd Probably caused by memory corruption nt MiBadShareCount c Followup MachineOwner --------- kd gt analyze -v Bugcheck Analysis PFN LIST CORRUPT e Typically caused by drivers passing bad memory descriptor lists ie calling MmUnlockPages twice with the same list etc If a kernel debugger is available get the stack trace Arguments Arg A PTE or PFN is corrupt Arg cdfb page frame number Arg current page state Arg cddd Debugging Details ------------------ BUGCHECK STR x E CUSTOMER CRASH COUNT DEFAULT BUCKET ID VISTA DRIVER FAULT PROCESS NAME BlackOpsMP exe CURRENT IRQL LAST CONTROL TRANSFER from fffff f f c to fffff e f STACK TEXT fffff f fffff f f c e cdfb nt KeBugCheckEx fffff f fffff e fffff be ba cdfb b fffffa f fffffa deb nt MiBadShareCount x c fffff f fffff f fffff be fffff e fffffa b aa fffff e nt FNODOBFM string' x e d fffff f b fffff f fffff a af e fffff fca fffff a bd fffffa f b nt MiRemoveFromSystemSpace x d fffff f fffff ab e fffffa de fffff b fd nt MmUnmapViewInSystemSpace x fffff f fffff a b fffffa e fffff fca dxgmms VIDMM GLOBAL DestroyOneAllocation x fffff fa fffff b fffffa e a fffffa d d dxgmms VIDMM DMA POOL RemoveDmaBufferFromPool x fffff fa fffff d fffff a de fffa fffff a acefc dxgmms VIDMM DMA POOL scalar deleting destructor' x b fffff faa fffff d f fffff a acefc fffff a de fffa dxgmms VidMmDestoryDmaPool x fffff fad fffff d d fffff a de fffff a de fffff fca fffa dxgkrnl DXGCONTEXTDestroy x d fffff fb fffff d df dc fffffa deb fffff fbc a e c dxgkrnl DXGDEVICEDestroyContext xb fffff fb fffff eba ffffffff ffb b f f dxgkrnl DxgkDestroyContext x a fffff fbf fffff e e fffffa deb fffff fca fffa fffffa win k NtGdiDdDDIDestroyContext x fffff fc a nt KiSystemServiceCopyEnd x a e x a STACK COMMAND kb FOLLOWUP IP nt MiBadShareCount c fffff f f c cc int SYMBOL STACK INDEX SYMBOL NAME nt MiBadShareCount c FOLLOWUP NAME MachineOwner MODULE NAME nt DEBUG FLR IMAGE TIMESTAMP c c a IMAGE NAME memory corruption FAILURE BUCKET ID X x E nt MiBadShareCount c BUCKET ID X x E nt MiBadShareCount c Followup MachineOwner Code Microsoft R Windows Debugger Version AMD Copyright c Microsoft Corporation All rights reserved Loading Dump File C Windows Minidump - - dmp Mini Kernel Dump File Only registers and stack trace are available Symbol search path is SRV C SymCache Symbol information Executable search path is Windows Kernel Version MP procs Free x Product WinNt suite TerminalServer SingleUserTS Built by amd fre win gdr - Machine Name Kernel base xfffff e PsLoadedModuleList xfffff a e Debug session time Sun Jan UTC System Uptime days Loading Kernel Symbols Loading User Symbols Loading unloaded module list Bugcheck Analysis Use analyze -v to get detailed debugging information BugCheck a a d c b b eebc f a fffff e c Probably caused by memory corruption Followup memory corruption --------- kd gt analyze -v Bugcheck Analysis CRITICAL STRUCTURE COR... Read more

A:Memory corruption or something else?

Hi and welcome to the forum. I see a number of files are missing in your upload. I looked at your three most recent dumps. Each has a different error code, two directly blame memory corruption, and the other indicated memory corruption. This points to a hardware/hardware related (drivers) issue.

Uninstall Trusteer Rapport. It is known to cause BSOD's on Win 7 systems. Here is some reading on this software. Online Banking Security | Trusteer,

MPECS Inc. Blog: Windows 7 BSODs ? RapportPG64.sys is the Culprit

I recommend that you uninstall TuneUp Utilities. Windows 7 is a totally different operating system than XP. Win 7 is not an evolution from XP. It is a totally new OS and even changed from Vista. Thus the wisdom we learned about XP - tweaking, cleaning, modifying for speed, etc - do not apply at all to Win 7. Forget that knowledge.

Windows is a closed source system. Developers of tuneup utilities and registry cleaners do not have the core code of Win 7 and are not working on definitive information, but rather they are going on past knowledge and experience, most of which is not applicable to Win 7. Automatic cleaners will usually have to do some guesswork.

There is almost no tweaking that can be done to Win 7 to speed it up. The system is designed to diagnose itself and take care of itself which it does remarkably well. Win 7 maintains itself and that includes the registry.

Tuneup utilities are pure snake oil. At best they do nothing except use resources. At worst, they can mess your system up, slowing it down, and even crash it. There is no tuneup utility out there anywhere that can speed Win 7 up and improve its performance, at least not at this time.

This isn't to say that the system does not need to be maintained. Uninstall programs that you don't use, delete unneeded and unnecessary files. Defrag your hard drive. But don't screw with the registry unless you are an in depth expert in the Win 7 registry.

We have seen the adverse effects of tuneup utilities and registry cleaners and registry defraggers in the Crashes and Debugging Section. Most of the time, the cure is a clean install. Using a program such as Ccleaner is fine to get rid of old and unnecessary files. A tuneup utility is not only unneeded, it can actually harm your system. Don't use them.

If you are overclocking anything, return to default values.

Another cause of memory corruption are out of date drivers. These can and do cause conflicts, memory corruption and BSOD's. I find these outdated drivers loaded on your system. The ones in red font are really obsolete. Some are XP drivers. Update the following drivers through the links provided or uninstall the software they are associated with.





Quote:
ADIHdAud.sys Thu May 21 04:21:06 2009 - SoundMAX Digital HD Audio Driver. OEM - none at Analog Devices | Mixed-signal and Digital Signal Processing ICs. Try to update this driver through computer manufacturer's or motherboard manufacturer's website.

Alpham164.sys Mon Jul 23 03:57:03 2007 - Ideazon ZBoard/Ideazon ZBoard Fang MM USB HID. http://www.steelseries.com/download.

Alpham264.sys Tue Mar 20 05:51:03 2007 - Ideazon ZBoard/Ideazon ZBoard Fang MM USB HID. http://www.steelseries.com/download.

AsIO.sys Mon Apr 06 03:21:08 2009 - Asus PCProbe Utility. ASUSTeK Computer Inc.-Support-.

KMWDFILTER.sys Wed Apr 29 02:20:48 2009 - UASSOFT.com HID (mouse) Driver Suspect that this is a Kensington Mouse Works driver - but there's nothing listed here AFAIK: ??????????. Update the driver or upgrade your mouse.

se64a.sys Thu May 03 01:50:31 2007 - EnTech softEngine. EnTech Taiwan. This utility is obsolete. Uninstall it.

yk62x64.sys Mon Feb 23 10:02:27 2009 - NDIS6.2 Miniport Drive, Marvell: Support.


Follow these suggestions and see how your systems does.

Code:
Windows 7 Kernel Version 7600 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
... Read more

http://www.sevenforums.com/bsod-help-support/135279-memory-corruption-something-else.html
Relevancy 54.18%

 Like 4 years ago a guy uploaded following video:

- Recently, after sharp price drop, I bought same Corsair 16gb and installed into my 15R 7520 
- Tested and laptop works  properly & faster

See my current configuration (screenshot Dell website):
Picture package:
Adios amigos !

http://en.community.dell.com/support-forums/laptop/f/3518/t/19748922
Relevancy 54.18%

I've tried system restore and got this message Windows detected file system corruption on OS C You must check disk corruption You system "Windows disk (C:). e on Error: OS file check must detected for for Error: "Windows detected file system corruption on OS (C:). You must check disk for e errors before it can be restored Error: "Windows detected file system corruption on OS (C:). You must check disk for e So down below of that message there's a link which says ''Check the disk for errors'' So I clicked Error: "Windows detected file system corruption on OS (C:). You must check disk for e on it and then it says ''Windows can't check disk while in use do you want to check for hard disk errors the next time you start your computer '' So I agree to it by clicking ''Schedule disk check'' So then I restart my computer amp and it does nothing at all I wanted to try system retore because theres this pop-up that keeps accuring on my Internet screen Google Crome Internet Explore that says ''Please Install Flash Player Pro To Continue'' and saying that It's outdated But when I did try to install it It wouldn't let me Comes to find out I THINK Idk it's like some type of virus But I was just wondering on why my computer wont allow me to restore now What should I do My computer Desk Top Windows Hp S I'm super slow when it comes to computers so please bear with me

A:Error: "Windows detected file system corruption on OS (C:). You must check disk for e

Hi, go to start search and type, cmd, right click on the returned cmd.exe and select "run as administrator" at the command prompt copy paste the following:-

reg query "HKLM\SYSTEM\CurrentControlSet\Control\Session Manager" > 0 & notepad 0

press enter, please post the notepad outcome here.

http://www.techsupportforum.com/forums/f217/error-windows-detected-file-system-corruption-on-os-c-you-must-check-disk-for-e-859513.html
Relevancy 53.75%

Two months ago I was playing my computer and it crashed When I went to reboot it wouldn't even make it to the Bios screen Eventually I removed a stick of memory and it still woudln't boot so I put one back and and put the other back in It booted but put me down to gb of memory so I went out and bout playing Corruption Memory WOW while a new kit of memory KHX C B RK X Memory Corruption while playing WOW and took the old one out At first I couldn't boot with two sticks of memory so I went and reset the cmos and was eventually able to boot Since then I have received BSOD numerous times and have drove myself crazy trying to figure it out I ran memtest and passed with no errors And as long as I don't play wow it hasn't crashed So I went and spent six hours today redownloading and reinstalling wow and it crashed as soon as I did I went and downloaded windowsbugger kit and tried my best to decipher myself with no luck

A:Memory Corruption while playing WOW

First, we want to make sure the computer is saving your dump files. Go to Control Panel -> System -> Advanced System Settings -> Startup and Recovery [Settings] Make sure that "Write Debugging Information" is set to Small Memory Dump (256kb) if it is not already. Create a Dump File when you get a BSOD
Next, make sure that the folder C:\Windows\Minidump exists. If not, create it (allow permission if asked). Make sure any dumps you want to analyze, whether yours or others', are in this folder. You can ZIP/RAR the files and send them to someone else to analyze as well.

http://www.sevenforums.com/bsod-help-support/305567-memory-corruption-while-playing-wow.html
Relevancy 53.75%

First of all I d Memory Video Corruption?! just like to say that this is my first post on this forum and that it s nice to see a forum dedicated to help people out I ve searched all over the internet for a solution Video Memory Corruption?! to my problem and I really hope I find it here So let s get on with the show Somewhere around christmas time I decided I should Video Memory Corruption?! get myself a computer since I ve been deprived of one of my own a few years ago best regards to my brother for shortcircuiting my old motherboard Anyway I bought a Pentium Ghz from a friend of mine who assured me it was broken so he sold me the processor motherboard ram and box for roughly After a while I pinpointed the error to the motherboard so Video Memory Corruption?! I boought a new one System specs follow Motherboard Asus P S -MX Processor Pentium Mhz RAM DDR Mhz I m not sure about the memory speed though Gfx card Nvidia GeForce MX Mb vRAM OS Windows XP Pro SP Build HD Gb Gb IDE Sound Card is onboard along with network card I have the latest drivers for all devices including gfx card bios etc and also all windows updates latest virus and firewall defenitions for norton internet security Pro and norton antivirus pro I also have adaware and run weekly virus scans discscans etc The system should be sqweeky clean But it aint First but minor problem is a overheated Pentium processor that tends to be around C F Maybe I could just get a new cooler to fix that but I heard it tends to decreasse system performance in order to protect the CPU The second and major problem is what windows loged as a System Error It usualy happens while playing computer I don t play much but my brother is addicted to CS It also happens to me in what seems to be a random order but it s more usual when I m playing any multimedia content such as videos The screen goes black with a thick red line on the top after that the system reboots The error log follows Tipo de evento Erro Origem do evento System Error Categoria do evento ID do evento Data - - Hora Utilizador N D Computador JO- V ADEEDPW Descri o C digo de erro d par metro e b a par metro par metro par metro f f Para mais informa es consulte o Centro de ajuda e suporte em http go microsoft com fwlink events asp Dados d System E f rror Er f f ror code d d Param eters e c b a c c f f The error report returned to me three diferente results Driver Problem of unknown origin Memory Problem Problem with a file in norton auto-update Since I have the latest nvidia drivers and since I installed the norton update but the problem remained I started doing some error checking I used windows memory check utility but after passes of exaustive tests it found no errors So I ran Burnin test and I got a lot of quot Video Memory Corruption quot errors So I switched the GeForce card with a TnT card but the error remained So I thought it would probably be a driver problem since both card use forceware drivers I switched to the onboard card and the problem was gone NOTE This was when I updated to the latest forceware drivers before that I was running some drivers that were released in March Even with these drivers the problem remains so I m a bit lost Perhaps the problem is on the AGP slot of my brand new mother board maybe both my second hand gfx card have the exact same problem or maybe it s just a software problem I also found another possibility which I somehow ruled out My power input is V and my peak powerconsumtion would be Watts since I dont have physics since th grade I don t remember the diference between Volts and Watts but I don t this would be a power distribution problem since I don t have lots of USB devices only mice a ADSL modem and a webcam Soooooooo Can anybody help me with this I gave all the information I think it s can be usefull but if something sliped my mind please say so Also forgive me for any misspelled word but It s one AM and my english tends to fail a bit after midnight Thanks for all help in advance nbsp

Relevancy 53.75%

Please Advice Microsoft reg Windows Debugger Version AMD Copyright copy Microsoft Corporation All rights reserved Loading Dump File C Users JinXiang Desktop - - dmp Mini Kernel Dump File Only registers and stack trace are available Symbol Path validation summary Response Time ms Location Deferred Corruption?! Memory [BSOD] SRV c symbols http msdl microsoft Memory Corruption?! [BSOD] com download symbols Symbol search path is SRV c symbols http msdl microsoft com download symbols Executable search path is Windows Kernel Version MP procs Free Memory Corruption?! [BSOD] x Product WinNt Memory Corruption?! [BSOD] suite TerminalServer SingleUserTS Personal Built by amd fre win gdr - Machine Name Kernel base xfffff b a c PsLoadedModuleList xfffff b d aa Debug session time Thu Nov UTC System Uptime days Loading Kernel Symbols Press ctrl-c cdb kd ntsd or ctrl-break windbg to abort symbol loads that take too long Run sym noisy before reload to track down problems loading symbols Loading User Symbols Loading unloaded module list Bugcheck Analysis Use analyze -v to get detailed debugging information BugCheck B c fffff a fb fffff f a be Probably caused by memory corruption Followup memory corruption --------- kd gt analyze -v Bugcheck Analysis SYSTEM SERVICE EXCEPTION b An exception happened while executing a system service routine Arguments Arg c Exception code that caused the bugcheck Arg fffff a fb Address of the instruction which caused the bugcheck Arg fffff f a be Address of the context record for the exception that caused the bugcheck Arg zero Debugging Details ------------------ DUMP FILE ATTRIBUTES x Kernel Generated Triage Dump EXCEPTION CODE NTSTATUS xc - The instruction at x lx referenced memory at x lx The memory could not be s FAULTING IP Npfs NpCommonCleanup b fffff a fb ff inc dword ptr rax CONTEXT fffff f a be -- cxr xfffff f a be r rax rbx ffffffffffffffff rcx fffffa e rdx fffffa e rsi fffffa f e rdi fffff a b faaa rip fffff a fb rsp fffff f a e rbp fffff f a r fffffa dd r r r fffffa ce f r r r fffffa e r fffff a b faa iopl nv up ei pl zr na po cy cs ss ds b es b fs gs b efl Npfs NpCommonCleanup x b fffff a fb ff inc dword ptr rax ds b Last set context rax rbx ffffffffffffffff rcx fffffa e rdx fffffa e rsi fffffa f e rdi fffff a b faaa rip fffff a fb rsp fffff f a e rbp fffff f a r fffffa dd r r r fffffa ce f r r r fffffa e r fffff a b faa iopl nv up ei pl zr na po cy cs ss ds b es b fs gs b efl Npfs NpCommonCleanup x b fffff a fb ff inc dword ptr rax ds b Resetting default scope CUSTOMER CRASH COUNT DEFAULT BUCKET ID CODE CORRUPTION BUGCHECK STR x B PROCESS NAME nacl exe CURRENT IRQL ANALYSIS VERSION debuggers dbg - amd fre LAST CONTROL TRANSFER from fffff a to fffff a fb STACK TEXT fffff f a e fffff a fffffa dd fffff a ffc b Npfs NpCommonCleanup x b fffff f a fffff ee fffffa fcc Npfs NpFsdCleanup x fffff f a fffff b ebd a fffffa f e fltmgr FltpDispatch xee fffff f a f fffff b eb b fffffa ab fffff a bb f nt IopCloseFile x fffff f a fffff b eb b fffc fffffa ad fffffa a nt ObpDecrementHandleCount xc fffff f a fffff b eff ffff ac e e fffff b f nt ObCloseHandleTableEntry x b fffff f a f fffff b f d fffffa a fffffa a fffffa a fffff a bb f nt ExSweepHandleTable xb fffff f a fffff b eed fffff a ef d fffffa nt ObKillProcess x d fffff f a fffff b f d fffffa a f f ba fffffa f nt PspExitThread x fffff f a a fffff b ad fffffa a fffffa f fffff f a b ffffffff ffffffff nt NtTerminateProcess xfd fffff f a b fd cb d dda nt KiSystemServiceCopyEnd x fd x fd cb d dda CHKIMG EXTENSION chkimg -lo -d Npfs fffff a fc-fffff a ff bytes - Npfs NpCommonCleanup c cb ff errors Npfs fffff a fc-fffff a ff MODULE NAME memory corruption IMAGE NAME memory corruption FOLLOWUP NAME memory corruption DEBUG FLR IMAGE TIMESTAMP MEMORY CORRUPTOR LARGE STACK COMMAND cxr xfffff f a be kb FAILURE BUCKET ID MEMORY CORRUPTION LARGE BUCKET ID MEMORY CORRUPTION LARGE ANALYSIS SOURCE KM FAILURE ID HASH STRING km memory corruption large FAILURE ID H... Read more

A:Memory Corruption?! [BSOD]

Hi jinxiang & Welcome to the forums ^_^,
 
I would need the Dump files in order to analyse the situation your system is in and help cure it ^_^.
Please note that without the Dump files, I can't help you out.
Kindly ZIP Up the dump files and then upload them to a File Hoster like Mediafire. The Dump files are located in "C:\Windows\Minidumps". You might need to copy them to some other folder before zipping them due to permission issues.
 
Once they are uploaded, paste back a link to it here and I would be glad to analyse them ^_^
 
 
-Pranav

http://www.bleepingcomputer.com/forums/t/555956/memory-corruption-bsod/
Relevancy 53.75%

I recently ran a stress test for my computer or a reliability test.

It turns out i only have problems with 2d graphics and i got 90 errors. With 3d graphics i got no errors.

It says Video memory corruption and to be honest I don't know what that means.

Any help guys?

Joe.
 

https://forums.techguy.org/threads/video-memory-corruption.573467/
Relevancy 53.75%

I recently ran a stress test for my computer or a reliability test.

It turns out i only have problems with 2d graphics and i got 90 errors. With 3d graphics i got no errors.

It says Video memory corruption and to be honest I don't know what that means.

Any help guys?

Joe.
 

https://forums.techguy.org/threads/video-memory-corruption.573463/
Relevancy 53.32%

after installing a new graphics card and trying to play a game, i instead received an error message saying that there isnt enough "Paged Pool Memory".
what is paged pool memory and how can i increase it? do i basically just have to add memory to my system?
thanks
 

A:paged pool memory

Paged pool memory is a region in virtual memory which can be paged in and paged out of the system. Device driver which do not need to access the memory from DPC/Dispatch level or above can use paged pool. it is accessible from any process context.
 

https://forums.techguy.org/threads/paged-pool-memory.970121/
Relevancy 53.32%

Ive been having this problem for ages now with all Valve games and valve games ONLY. Just as im about to go in-game it crashes to desktop with an error message reading "Internal driver error at Present: You're likely out of OS Paged Pool Memory!"

I had a feeling this was a RAM related issue and considering I only had 2GB, I upgraded to 4 GB - It still does it

Iv'e tried changing the Paged Pool size through the regedit - It still does it.

Ive tried everything, its getting rediculous now, I really dont see what could be wrong, I have a beast of a PC for gods sake it can run crysis.

Thanks
 

https://forums.techguy.org/threads/os-paged-pool-memory.815978/
Relevancy 53.32%

I copied over a large file (550mb) earlier on today to give to a friend. It failed for problems I thought were on his memory stick.

I was just about to e-mail some very important work, a word doc, and found this in it's folder.
It is crucial that I somehow get this work back. In there there SHOULD be about 7 MS Office word documents in about 6 folders.
As you can see, nothing opens or is readable.

What do I do? I NEED this work!

Thanks for any help at all...
-Jack
 

A:Solved: Memory stick corruption

Well I had to format it and wipe it all indefinetely.

Thanks for your help... not.

Solved, I guess.
 

https://forums.techguy.org/threads/solved-memory-stick-corruption.518377/
Relevancy 53.32%

Why are so many people (myself included) suddenly seeing Memory Corruption Errors when installing Windows 7? Systems that appear to have been running previous versions of Windows fine for some time are suddenly crashing with this listed as a major culprit. What is different in Windows 7 that makes it so sensitive to memory errors?

Inquiring minds want to know...

-Jerry

A:Question about all of these memory corruption issues

Seems it usually pops up when installing Win 7 *AND* they have added memory.

http://www.sevenforums.com/bsod-help-support/41797-question-about-all-these-memory-corruption-issues.html
Relevancy 53.32%

Howdy!
My Laptop just recently went through the "blue screen of death phase", and now it wont even load windows for me to go to boot options for a safe mode..it gives me a black screen with a no read/write option along with specific codes and also says below that it is currently decreasing memory.
It doesn't load thereafter, and if I try to f8 or f12 upon rebooting it gives me a "1 time option" and then goes right to the no read/write black page.
I wish I would have caught this issue sooner, and just restored my computer to factory settings? I just bought this puppy about 4 months ago (it was used ofcourse, but everything was wiped clean..or so I thought)
Hoping I can get some help concerning all of this.
Upon reply I will type out the specific read/write error codes.
Cheers!!
 

https://forums.techguy.org/threads/dell-laptop-memory-corruption.1127209/
Relevancy 53.32%

I've already run Memtest86+ for 12 passes, about 24 hours, and the Windows memory diagnostic tool and neither found anything.

I just switched back to windows 7 as a fresh install. Wiped and formatted all hard drives minus a storage drive, and I've literally replaced all my hardware except my RAM. I've updated everything already, windows updates, drivers, etc.

I am getting the same crash as I was in Win 8 and 10 where the computer will freeze and audio will start to skip followed by a BSOD. I've attached the files below.

http://www.sevenforums.com/bsod-help-support/380339-bsod-memory-corruption-win7_driver_fault.html
Relevancy 53.32%

Firefox Memory Corruption Vulnerability dated July 14, 2009.

Related: Firefox 3.5 Vulnerability Rated 'Highly Critical'

Exploit code for a vulnerability in Firefox was posted online on Monday. Mozilla says it is working on a fix.

-- Tom
 

A:Firefox Memory Corruption Vulnerability

Dear lotuseclat79,
Thank you! How far will Sandboxie and GeSWall help in surviving the threats posed by security holes in FF3.5 and IE8?
 

https://forums.techguy.org/threads/firefox-memory-corruption-vulnerability.843410/
Relevancy 53.32%

Im constantly getting Memory Corruption BSOD within seconds or minutes of Corruption - Only BSOD first Memory on boot. logging in to the computer But the weird thing is after its crashed Memory Corruption BSOD - Only on first boot. once it wont do crash again until a few hours later when you restart System Specs are in the tab at the bottom Ive replaced the Memory Corruption BSOD - Only on first boot. graphics card with my old trusty ATI card and i still got these crashes Ive even replaced the ram i used to have GB of Corsair ram but changed to GB of G Skill mhz ram The cpu is overlocked from ghz to ghz all the overclocking was set up by a online company but after them failing to help me im willing to changed voltages etc ill post details of the voltages later in case that might be the cause Ive replaced my keyboard mouse installed only basic software because memory corruption can range from any type of device software driver googled it Ive also done a clean install of Windows and removed and reseated most of the components Ive also attached the mini dumps in case anyone can make more sense from them than i can Thanks

A:Memory Corruption BSOD - Only on first boot.

  
Quote: Originally Posted by fluffedup


Im constantly getting Memory Corruption BSOD within seconds or minutes of logging in to the computer. But the weird thing is after its crashed once it wont do crash again until a few hours later when you restart.


System Specs are in the tab at the bottom.

Ive replaced the graphics card with my old trusty 4870 ATI card and i still got these crashes. Ive even replaced the ram, i used to have 4GB of Corsair ram but changed to 8GB of G Skill 1600mhz ram.

The cpu is overlocked from 2.67ghz to 3.63ghz, all the overclocking was set up by a online company but after them failing to help me im willing to changed voltages etc, ill post details of the voltages later in case that might be the cause.

Ive replaced my keyboard/mouse/installed only basic software because memory corruption can range from any type of device/software/driver (googled it).
Ive also done a clean install of Windows 7 and removed and reseated most of the components.

Ive also attached the mini dumps in case anyone can make more sense from them than i can. Thanks.


Well these were casued by memory corruption. One ither thing I noticed was that your AVP.exe (kaspersky AV) was in the stack on several of the crashes. I would remove the AV and test the memory by downloading memtestx86 and run it for 5 passes.
Let us know if you need help
Ken


Code:
031910-23134-01.dmp 3/19/2010 6:35:32 PM BAD_POOL_HEADER 0x00000019 00000000`00000003 fffffa80`06692920 fffffa80`06692920 fffffa80`04692920 fltmgr.sys fltmgr.sys+1b52 x64 C:\Users\K\Desktop\Mini Dumps\031910-23134-01.dmp 4 15 7600
031910-21528-01.dmp 3/19/2010 6:38:16 PM IRQL_NOT_LESS_OR_EQUAL 0x0000000a fffff680`000117e8 00000000`00000000 00000000`00000000 fffff800`02eb81ca ntoskrnl.exe ntoskrnl.exe+71f00 x64 C:\Users\K\Desktop\Mini Dumps\031910-21528-01.dmp 4 15 7600
031910-22666-01.dmp 3/19/2010 6:27:14 PM MEMORY_MANAGEMENT 0x0000001a 00000000`00041790 fffffa80`04aecc50 00000000`0000ffff 00000000`00000000 ntoskrnl.exe ntoskrnl.exe+71f00 x64 C:\Users\K\Desktop\Mini Dumps\031910-22666-01.dmp 4 15 7600
032010-28704-01.dmp 3/20/2010 1:29:32 PM MEMORY_MANAGEMENT 0x0000001a 00000000`00041287 00000000`00000000 00000000`00000000 00000000`00000000 ntoskrnl.exe ntoskrnl.exe+71f00 x64 C:\Users\K\Desktop\Mini Dumps\032010-28704-01.dmp 4 15 7600
032010-29094-01.dmp 3/20/2010 1:25:18 PM MEMORY_MANAGEMENT 0x0000001a 00000000`00041790 fffffa80`04abdb50 00000000`0000ffff 00000000`00000000 ntoskrnl.exe ntoskrnl.exe+71f00 x64 C:\Users\K\Desktop\Mini Dumps\032010-29094-01.dmp 4 15 7600
032110-22994-01.dmp 3/21/2010 7:19:28 PM MEMORY_MANAGEMENT 0x0000001a 00000000`00041790 fffffa80`04abdb20 00000000`0000ffff 00000000`00000000 ntoskrnl.exe ntoskrnl.exe+71f00 x64 C:\Users\K\Desktop\Mini Dumps\032110-22994-01.dmp 4 15 7600
032110-27034-01.dmp 3/21/2010 12:18:56 PM MEMORY_MANAGEMENT 0x0000001a 00000000`00041201 fffff683`ff7f55e0 8a000002`085ed025 fffffa80`06a784f0 ntoskrnl.exe ntoskrnl.exe+71f00 x64 C:\Users\K\Desktop\Mini Dumps\032110-27034-01.dmp 4 15 7600
032110-34741-01.dmp 3/21/2010 11:53:40 AM MEMORY_MANAGEMENT 0x0000001a 00000000`00041790 fffffa80`04a8b750 00000000`0000ffff 00000000`00000000 ntoskrnl.exe ntoskrnl.exe+71f00 x64 C:\Users\K\Desktop\Mini Dumps\032110-34741-01.dmp 4 15 7600

http://www.sevenforums.com/bsod-help-support/72738-memory-corruption-bsod-only-first-boot.html
Relevancy 53.32%

Hello!
I get BSOD upon startup. But not everytime I start the PC. It's like once a day, and often when I start the PC for the first time in the morning. I hope some of you guys can give me some help. The only thing I catched from the dump file was something about a memory corruption...

Thanks in advance

M

A:BSOD at startup (only?), (Memory Corruption)

Welcome

Problematic software:

Code:
Start Menu\Programs\Norton Internet Security Public:Start Menu\Programs\Norton Internet Security Public
Norton is known to cause BSODs, please uninstall it.Norton Removal Tool

Recommended antivirus program for Windows 7 based on stability compared to others:- Microsoft Security Essentials - Free Antivirus for Windows
Malwarebytes - The Free version
Good and Free system security combination.
Run a full scan with both (separately) once downloaded, installed and updated.

Your graphic card drivers need to be updated. The current ones installed on your laptop is from 2009 (very old)

Code:
Drivrutin c:\windows\system32\drivers\atikmdag.sys (8.1.1.921, 5,76 MB (6*037*504 byte), 2009-08-18 03:48)

Code:
2: kd> lmvm atikmdag
start end module name
fffff880`07402000 fffff880`07a19000 atikmdag T (no symbols)
Loaded symbol image file: atikmdag.sys
Image path: \SystemRoot\system32\DRIVERS\atikmdag.sys
Image name: atikmdag.sys
Timestamp: Tue Aug 18 09:05:47 2009 (4A8A1A8B)
CheckSum: 005CE06B
ImageSize: 00617000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Click on the Start ► Control Panel ► Programs ► Uninstall a program ► Uninstall everything related to ATI and reboot.

Delete remnants of the older drivers using Driver Sweeper

Get the latest version from the AMD website or from a reliable source like filehippo.com. If not that way then open Device Manager and update from there.

Run the System File Checker that scans the of all protected Windows 7 system files and replaces incorrect corrupted, changed/modified, or damaged versions with the correct versions if possible:SFC /SCANNOW Command - System File Checker
Run Disk Check on your hard disk for file system errors and bad sectors on it:Disk Check
Keep us posted

http://www.sevenforums.com/bsod-help-support/260431-bsod-startup-only-memory-corruption.html
Relevancy 52.89%

When playing games via steam I occasionally get a crash followed by the error message.

failed to lock vertex buffer in cmesh dx8

According to the FAQ on steam this is caused by a lack of paged pool memory which is reserved for apps like direct3d.

To get round this issue its recommended that you remove a line form the boot.ini which unlocks the page pool memory. The line is /3GB /Userva=2900

Does anyone know where this line is in windows 7 or how I can unlock the paged pool memory as I'm finding the crashes are starting to interfere with my enjoyment of gaming.

Any help gratefully appreciated.

A:Paged pool memory issues

Paged pool is memory that's "paged" out to the paging file on your hard drive. The easiest way would be (I think) to increase the amount of paging file allowed on your hard drive (see this article for more details on the paged pool: Mark's Blog : Pushing the Limits of Windows: Paged and Nonpaged Pool )

As for the /3gb switch, this is for programs that are aware of the 3gB switch. It won't do anything if the programs aren't specifically designed for it. What it does is allocate 3 gB of virtual memory for user level processes - leaving 1 gB for kernel level processes. And, it only applies to a 32 bit OS. Are you running 32 or 64 bit Windows 7?

http://www.sevenforums.com/general-discussion/11393-paged-pool-memory-issues.html
Relevancy 52.89%

Hello I ve been having some issues with Windows XP Paged pool error memory over the last couple of months It got much worse once I installed StarCraft II on my computer I get the error quot Your computer has run out of paged pool memory quot and the program lags or crashes I looked under blizzards website and they state that this is a Windows XP problem From what I can find it usually occurs Paged pool memory error from a bad driver that is taking paged memory and not releasing it I upgrade drivers for every piece of hardware I could find under Device Manager with no luck Microsoft has some tools to track paged memory but I cant seem to get any of them to work Some of the tools seem out of date or missing Is there a program that will identify what is filling up my paged memory Is there a way to quot empty quot the memory pool My system exceeds the minimum requirements for the game I have reduced the video effects in game to the bare minimum with no result System AMD Dual Core Ghz GB RAM Microsoft Windows XP Home Edition Version Service pack ATI Radeon HD video card with Gb Vram Any help you can provide is appreciated

A:Paged pool memory error

Here is the error message that was reported after the last crash.================================================================================StarCraft II (B16561)Time: 2010-09-26 18:31:54.437Exe: C:\Program Files\StarCraft II\Versions\Base16561\SC2.exeParameters: Exe Built: 2010-09-21 16:33:41.187User: meComputer: ME-55BB3FBB205DVersion: 1.1.0.16561Branch: branches/1.1.0Revision: 84907Locale: enUS================================================================================e_gfxGraphicsAPIError"StarCraft II has encountered an unexpected DirectX/OpenGL error. This may indicate an issue with an out-of-date videocard driver. If the problem persists, for more information consult our support website at [url="http://starcraft2.com/support.""]http://starcraft2.com/support."[/url]Error code: D3DERR_INVALIDCALL (8876086C) ------------------------------------------------------------------------------------------------------------------------ Manual Stack Trace (ID:216 Stack:0x044D0000 + 8,388,608 "Main Thread")----------------------------------------DBG-ADDR<00A18449>("SC2.exe")DBG-ADDR<00A18541>("SC2.exe")DBG-ADDR<00A0F762>("SC2.exe")DBG-ADDR<00D100F3>("SC2.exe")DBG-ADDR<00D1031F>("SC2.exe")DBG-ADDR<00C77C83>("SC2.exe")DBG-ADDR<00C78A2E>("SC2.exe")DBG-ADDR<00C7A2A0>("SC2.exe")DBG-ADDR<00C7A9F5>("SC2.exe")DBG-ADDR<00BC08BB>("SC2.exe")DBG-ADDR<00BA8BF4>("SC2.exe")DBG-ADDR<00BA8C3C>("SC2.exe")DBG-ADDR<00BA8C3C>("SC2.exe")DBG-ADDR<00BA8C3C>("SC2.exe")DBG-ADDR<00BA8C3C>("SC2.exe")DBG-ADDR<00BA8C3C>("SC2.exe")DBG-ADDR<00BA8C3C>("SC2.exe")DBG-ADDR<00B98A08>("SC2.exe")DBG-ADDR<00804A17>("SC2.exe")DBG-ADDR<00808B17>("SC2.exe")DBG-ADDR<00809E06>("SC2.exe")DBG-ADDR<0080A085>("SC2.exe")---------------------------------------- DbgHelp Stack Trace (ID:216 Stack:0x044D0000 + 8,388,608 "Main Thread")----------------------------------------DBG-ADDR<00A18449>("SC2.exe") (8876086C,0146A9A4,00000000,00000001)DBG-ADDR<00A18541>("SC2.exe") (8876086C,0146A9A4,00000000,00000000)DBG-ADDR<00A0F762>("SC2.exe") (00000003,00000060,00000020,00000000)DBG-ADDR<00D100F3>("SC2.exe") (04CCE694,1EA810B4,00000001,00000001)DBG-ADDR<00D1031F>("SC2.exe") (1EA810B4,2F4C44C8,00000001,04CCE694)DBG-ADDR<00C77C83>("SC2.exe") (04CCE694,0000000B,04CCE678,00C7A2A0)DBG-ADDR<00C78A2E>("SC2.exe") (04CCE694,04CCE7C0,04CCE7C0,2F4C44C8)DBG-ADDR<00C7A2A0>("SC2.exe") (04CCE694,00000000,056E65C8,304A12A0)DBG-ADDR<00C7A9F5>("SC2.exe") (263FEF20,016E65C8,0000026F,00000284)DBG-ADDR<00BC08BB>("SC2.exe") (FF000000,0000012F,00000000,2E566108)DBG-ADDR<00BA8BF4>("SC2.exe") (0000012F,00000000,04CCEB48,0000012F)DBG-ADDR<00BA8C3C>("SC2.exe") (0000012F,00000000,04CCEB8C,0000012F)DBG-ADDR<00BA8C3C>("SC2.exe") (0000012F,00000000,04CCEBD0,0000012F)DBG-ADDR<00BA8C3C>("SC2.exe") (0000012F,00000000,04CCEC14,0000012F)DBG-ADDR<00BA8C3C>("SC2.exe") (0000012F,00000000,04CCEC58,0000012F)DBG-ADDR<00BA8C3C>("SC2.exe") (0000012F,00000000,04CCEC9C,00000010)DBG-ADDR<00BA8C3C>("SC2.exe") (0000012F,00000000,04CCF0DC,00000000)DBG-ADDR<00B98A08>("SC2.exe") (055007E0,053781A8,00000000,0000012F)DBG-ADDR<00804A17>("SC2.exe") (7C800000,0146A9A4,00000000,008092D3)DBG-ADDR<00808B17>("SC2.exe") (000502B2,04CCFFB4,0080A085,00000000)DBG-ADDR<00809E06>("SC2.exe"... Read more

http://www.bleepingcomputer.com/forums/t/349850/paged-pool-memory-error/
Relevancy 52.89%

Hey everyone I am a newbie PC builder I have recently built a computer consist of the following spec OS Version Microsoft Windows Home Premium Service Pack bit Processor Intel paged fix the How memory pool to problem? R Core TM i - K CPU GHz Intel Family Model Stepping Processor Count RAM G Skill Ripjaws X Series Mb Graphics Card Gigabyte NVIDIA GeForce GTX Mb Motherboard MSI Z A-GD MS- I have nothing but the msi driver utility process explorer office pro and Assassin s Creed II installed I have updated all MB drivers through the msi utility updated Windows as much as possible installed the latest GPU driver from nvidia When I played AC II the GPU driver crashes every sec I also got the message saying my PC is running out of paged pool memory How to fix the paged pool memory problem? I tried the method from teamliquid it doesn t work I went to process explorer under system information both of the paged and non-paged limit have no symbol That is all I have Thank you and greatly appreciate any help nbsp

https://forums.techguy.org/threads/how-to-fix-the-paged-pool-memory-problem.1041449/
Relevancy 52.89%

I have a serious memory leak in nonpaged pool which happen to be Irp packets Here is the whole story The system is Win Ultimate x which I primarily use to host some VirtualBox VMs Around beginning of May I noticed nonpaged in tag) (Irp pool memory Serious leak that the box started to lock up and it was rock solid for almost a Serious memory leak in nonpaged pool (Irp tag) year before then I discovered that the reason for lock ups is a memory leak that east up its Serious memory leak in nonpaged pool (Irp tag) GB of memory in a few days I started digging deeper and figured out that the nonpaged memory grows from the typical MB or so to a few GBs in a couple of days The poolmon tool pointed to Irp tag as the clear offender I thought it could be some update or new driver that got installed so I restored the system from an earlier image I went back to images as far back as November October and September last year but nothing helped The system was working fine till about end of April so I was very surprised that reverting back to the time the system was working OK did not fix the problem Anyway further troubleshooting with driver verifier log file analysis did not point to any driver with suspicious amount of allocated memory So the next step was to force a memory dump with driver verifier running and use verifier kernel debugger extension to see the memory allocated First of all driver verifier puts a lot of load on the system so it stops responding after few hours with CPUs pegged at Also the system is much slower when driver verifier is running and the memory leak happens at the much slower rate I recently forced a memory dump after about hours of system uptime The nonpaged memory was about MB so I'd expected a clear indication of what driver has plenty of memory allocated Unfortunately not so The verifier provided this output Verify Level enabled options are All pool allocations checked on unload Io subsystem checking enabled IRP Logging Summary of All Verifier Statistics RaiseIrqls x AcquireSpinLocks x b d Synch Executions x b a Trims x Pool Allocations Attempted x c Pool Allocations Succeeded x c Pool Allocations Succeeded SpecialPool x c Pool Allocations With NO TAG xa Pool Allocations Failed x Resource Allocations Failed Deliberately x Current paged pool allocations x a a for CA bytes Peak paged pool allocations x a for A EE bytes Current nonpaged pool allocations x e for C D bytes Peak nonpaged pool allocations x for AECF bytes Driver Verification List Entry State NonPagedPool PagedPool Module fffffa cb d Loaded hal dll fffffa cb Loaded kdcom dll fffffa cafd Loaded mcupdate dll fffffa cafd Loaded PSHED dll fffffa cb Loaded c f CLFS SYS fffffa cb Loaded a CI dll fffffa cb af Loaded e Wdf sys fffffa cb ad Loaded d WDFLDR SYS fffffa cb abd Loaded bc a ACPI sys fffffa cb aa Loaded WMILIB SYS fffffa cb a Loaded msisadrv sys fffffa cb a Loaded e pci sys fffffa cb a Loaded vdrvroot sys fffffa cb a Loaded ec partmgr sys fffffa cb a b Loaded compbatt sys fffffa cba e Loaded a BATTC SYS fffffa cba c Loaded volmgr sys fffffa cba a Loaded volmgrx sys fffffa cba b Loaded pciide sys fffffa cba d Loaded PCIIDEX SYS fffffa cba Loaded d jraid sys fffffa cba Loaded SCSIPORT SYS fffffa cba Loaded mountmgr sys fffffa cba f Loaded vmbus sys fffffa cba d Loaded e winhv sys fffffa cba b Loaded atapi sys fffffa cba a Loaded ec ataport SYS fffffa cba e Loaded amdxata sys fffffa cba Loaded ae fltmgr sys fffffa cba Loaded ba fileinfo sys fffffa cba Loaded abf a stcvsm sys fffffa cba fa Loaded f f d Ntfs sys fffffa cba dc Loaded b b msrpc sys fffffa cba bb Loaded a ksecdd sys fffffa cba d Loaded ae cng sys fffffa cba f Loaded pcw sys fffffa cba Loaded Fs Rec sys fffffa cba Loaded a ndis sys fffffa cba Loaded a NETIO SYS fffffa cba Loaded b ksecpkg sys fffffa cba f Loaded tcpip sys fffffa cba d Loaded e b fwpkclnt sys fffffa cba b Loaded vmstorfl sys fffffa cba Loaded c e f volsnap sys fffffa cba a Loaded spldr sys fffffa cba Loaded c rdyboost sys fff... Read more

A:Serious memory leak in nonpaged pool (Irp tag)

Memory leaks occur for only one reason, and that is flawed & poorly programmed software. You are running some 3rd party (non-Microsoft) software that is not releasing memory after it is done with it. It's the software's fault.

It might be patched in an update, but if not there is nothing you can do other than re-coding & fixing the software.

http://www.techsupportforum.com/forums/f217/serious-memory-leak-in-nonpaged-pool-irp-tag-669275.html
Relevancy 52.46%

I have been having a bunch of crashes while playing games like Battlefield 3 and Wow. When I've played Skyrim and other games there have been zero crashes. Using WhoCrashed tell me about memory corruption, and doing Windows Memory check comes up with no problems detected. How should I go about figuring out what is the cause?

GA-990XA-UD3
AX6950 1bg
AMD Phenom II x 4 965
G.Skil 6b (3x2bg) RAM

I think all drivers are up to date, but obviously one is causing a problem.

Any suggestions would be appreciated, I am pretty new to debugging so try not to use too much jargon.

A:BSOD memory corruption while playing come games

  
Quote: Originally Posted by Blakerade


I have been having a bunch of crashes while playing games like Battlefield 3 and Wow. When I've played Skyrim and other games there have been zero crashes. Using WhoCrashed tell me about memory corruption, and doing Windows Memory check comes up with no problems detected. How should I go about figuring out what is the cause?

GA-990XA-UD3
AX6950 1bg
AMD Phenom II x 4 965
G.Skil 6b (3x2bg) RAM

I think all drivers are up to date, but obviously one is causing a problem.

Any suggestions would be appreciated, I am pretty new to debugging so try not to use too much jargon.



We do need the actual DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.

It is almost impossible to spot trends from a single DMP file so if you have more than one please upload them. If you only have one please wait until the computer crashes again then upload both.

You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.

To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

The procedure:





Quote:
* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.
*If the files are too large please upload them to a file sharing service like "Rapidshare" and put a link to them in your reply.


To ensure minidumps are enabled:





Quote:
* Go to Start, in the Search Box type: sysdm.cpl, press Enter.
* Under the Advanced tab, click on the Startup and Recovery Settings... button.
* Ensure that Automatically restart is unchecked.
* Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
* Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
* OK your way out.
* Reboot if changes have been made.

http://www.sevenforums.com/bsod-help-support/200584-bsod-memory-corruption-while-playing-come-games.html
Relevancy 52.46%

Bad memory ,system corruption ,missing file

I found out in one of my thread on malware problem running a scan result of Farbar Recovery Scan Tool saying I may have bad memory.And because this is not malware related and I don't want to be taking any more time of the malware specialists there and so I will post here.

what scans can I run to see if my memory is okay? Could system corruption ,missing file or malware cause bad memory? Only problems I have been having is thumbnails taking a very long time to load in the administrator account but okay in the guest account

Farbar Recovery Scan Tool saying I may have bad memory thread saying it

http://forums.techguy.org/virus-oth...computer-after-malware-pop-6.html#post8982003
http://forums.techguy.org/virus-other-malware-removal/1133892-slow-computer-after-malware-pop-4.html
http://forums.techguy.org/virus-other-malware-removal/1133892-slow-computer-after-malware-pop.html
 

Relevancy 52.46%

Hello,

I just made a new computer last week and I have been getting BSODs when I first start up my computer. After the BSOD, the computer restarts and acts as normal.

I believe it may have to do with me having my window files on an SSD while my users files on an HDD. I did this separation using audit mode that comes with windows so i am not sure what exactly the problem is.

Thanks in advance for the help.

A:BSOD upon initial startup, memory corruption

Welcome

Have you updated to the latest firmware for your SSD?

http://www.sevenforums.com/bsod-help-support/259764-bsod-upon-initial-startup-memory-corruption.html
Relevancy 52.46%

Okay so I just bought this really nice laptop and I've had it for days now and you may be able to imagine my pained expression when I memory memory_management, BSOD corruption, kmode_exception_not_handled realized that I kept repeatedly getting blue screens Sometimes it happens when I am playing facebook games sometimes while watching youtube videos and once while launching a game I play called League of Legends BSOD memory_management, memory corruption, kmode_exception_not_handled I ran BSOD memory_management, memory corruption, kmode_exception_not_handled driver genius and it found driver updates and I installed all of them so I am pretty sure all my BSOD memory_management, memory corruption, kmode_exception_not_handled drivers are up to date I've tried reformatting and I didn't get a BSOD almost all day but then I finally got one again I don't know if it is one of the drivers I have installed or if it's my RAM or if it is my SSD or HDD I'm REALLY hoping this isn't a hardware problem because I don't have any blank discs at the moment to burn the memory tester for my RAM I have sticks of gigs of RAM If this does turn out to be a hardware problem I've already contacted the retailer of my laptop to begin the RMA process as a last resort Any help with this would be sooo greatly appreciated Before my reformat I had other mini dumps and one of them was for pfn list corruption as well

A:BSOD memory_management, memory corruption, kmode_exception_not_handled

Update the following drivers:
Logitech Gamepanel Virtual HID Device Driver
fffff880`150a4000 fffff880`150a6480 LGVirHid Tue Nov 24 02:36:48 2009 (4B0B38B0)

Atheros Bluetooth Bus
fffff880`051ed000 fffff880`051fa000 btath_bus Wed Jul 20 04:59:56 2011 (4E2644AC)

Name Logitech G930 Headset
fffff880`07457000 fffff880`074a8d00 ladfGSRamd64 Mon Apr 11 20:41:07 2011 (4DA34B43)

http://www.sevenforums.com/bsod-help-support/259766-bsod-memory_management-memory-corruption-kmode_exception_not_handled.html
Relevancy 52.46%

hello forum!

i got some bluescreens randomly around the day while playing bf1 / other games.

system setup:

board: asus m5A99FX PRO R2.0 990FX
cpu: amd fx 8350
gfx: EVGA 1070 SC
RAM: 8gb Kingston Hyper X Blu DDR3

I switched the ram to a known as fully working ram. but no fix.

now i think its a driver problem.

thanks for help! i appreciate the help here in the forum. very nice service!

regards

schnub

PS: if you need extra information please feel free to ask.

http://www.tenforums.com/bsod-crashes-debugging/67381-bsod-bf1-other-games-memory-corruption-bad-driver.html
Relevancy 52.46%

Hey guys,

Got an error in adobe acrobat saying "The application is being terminated because of memory corruption."

I have tried a couple of suggestions from Adobe's site with no avail. Is there any other suggestions? I will provide the link to Adobe's suggestions.

Thanks in advanced guys!

http://kb2.adobe.com/cps/331/331958.html

A:Adobe Acrobat 7.08 memory corruption error

Have you tried solution #2? Right click the Start button and choose Explore. Go up to Tools/Folder Options/View put a check in Show Hidded Files and Folders. Now Browse to C:\Documents and Settings\YourUserName\Application Data\Adobe\Acrobat\7.0\ and delete the file Organize70.

http://www.techsupportforum.com/forums/f10/adobe-acrobat-7-08-memory-corruption-error-437511.html
Relevancy 52.46%

Hi everyone

I'm running a sony vaio notebook, vista home premium 32 bit, 3gb ram (2gb hynix, 1gb kingmax), intel core 2 duo t8100, ati mobility radeon x2300. I have been getting a persistent blue screen of death with the error message: "special pool detected memory corruption".

I have run the debug program and was hoping someone could kindly assist me with interpreting the minidump. The debug report says the problem is probably caused by "memory corruption". Please refer to the attached notepad file. Many thanks, from a relative computer newbie.

A:BSOD memory corruption, please help with interpreting minidump!

Hi -

The bugcheck on your attached dbug log -

0xc1 (0x90966fb0, 0x90966ffe, 0x33804e, 0x24), prob cause = memory corruption.

As you noted, 0xc1 = SPECIAL_POOL_DETECTED_MEMORY_CORRUPTION = driver wrote to an invalid section of the special pool. The last perm 0x24 indicates that the driver freed memory in an improper manner.

Sorry, but not much can be done w/ that dump log. Run the driver verifier as it will help find the rogue driver:
START | type cmd.exe | right-click on cmd.exe uptop under programs | Run as Administrator | type verifier & hit enter - the Verifier screen will appear | do the following:

Code:

1. Select 2nd option - Create custom settings (for code developers)
2. Select 2nd option - Select individual settings from a full list.
3. Check the boxes? Special Pool
? Pool Tracking
? Force IRQL checking4. Select last option - Select driver names from a list
5. Click on the Provider heading - sorts list by Provider
6. Check ALL boxes where Microsoft is not the Provider
7. Click on Finish
8. Re-boot

If the Driver Verifier (DV) finds a violation, it will result in a BSOD. To see the status of Verifier - type verifier - select the last option on the first screen - "Display information about the currently verified drivers..". To turn Driver Verifier off - verifier /reset then re-boot. If you get a verifier-enabled BSOD, get it ASAP - go to \windows\minidump - get it, zip it up and attach.

Before I run any dumps, I will need system info from you. Please follow THESE instructions.

Reagrds. . .

jcgriff2

.

http://www.techsupportforum.com/forums/f299/bsod-memory-corruption-please-help-with-interpreting-minidump-339203.html
Relevancy 52.46%

OS - Win 10 x64 · What was original installed OS on system?Win 8. reinstalled clean with win 10.· Is the OS an OEM version (came pre-installed on system) or full retail version (YOU purchased it from retailer)?Full retail version· Age of system (hardware)3.5 year· Age of OS installation - have you re-installed the OS?Less than a year · CPUIntel i7-3770k CPU @3.50GHz(8CPU)· Video CardAMD Radeon HD 7800 Series· MotherBoard - (if NOT a laptop)· Power Supply - brand & wattage (skip if laptop) Will post information upon request· System ManufacturerGigabyte Technology     Extra note: I've been using an application called Driver Booster 3.3 which function as updating all of my drivers.

http://www.bleepingcomputer.com/forums/t/610503/memory-management-critical-structure-corruption/
Relevancy 52.46%

Hello and thank you in advance for any help with this and all the great info in the forums that has helped me in the past.

Problem is, built a new system, mobo, ram, cru. power supply all new. Runs pretty good but highly unstable,
Anyway, the BSOD seems to happen mostly while doing updates to either windows or drivers. I suspect something to do with the ATI driver that came with mobo but i'm at a loss here as i got same bad pool header or memory management BSOD during fresh install.
Ran MemTest 11 passes 0 Errors.

Thank you again

A:BSOD Memory Management and Bad Pool Header

Hello Darkrelik and welcome to Sevenforums.

Things we need
A nfo file




Quote:
To get this: Start Menu -> Type msinfo32 into the Search programs and files box -> When it opens, go to File, Save -> Save as msinfo32.nfo and save in a place you will remember -> Let it finish the process of gathering and saving the system info -> Right click the .nfo file, click send to compressed (zipped) folder -> Upload the .zip file here.



BSOD Analyse

Make sure that your pins on the cooler is all the way in. It seems like the pooler turned bad. Have you installed anything additionally such as software?


Code:
BAD_POOL_HEADER (19)
The pool is already corrupt at the time of the current request.
This may or may not be due to the caller.
The internal pool links must be walked to figure out a possible cause of
the problem, and then special pool applied to the suspect tags or the driver
verifier to a suspect driver.
Arguments:
Arg1: 0000000000000020, a pool block header size is corrupt.
Arg2: fffff8a00c34d2a0, The pool entry we were looking for within the page.
Arg3: fffff8a00c34d310, The next pool entry.
Arg4: 0000000005070207, (reserved)
Debugging Details:
------------------
BUGCHECK_STR: 0x19_20
POOL_ADDRESS: fffff8a00c34d2a0
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: poqexec.exe
Best Regards,
Frederik.

http://www.sevenforums.com/bsod-help-support/246021-bsod-memory-management-bad-pool-header.html
Relevancy 52.46%

Hi So for the past two weeks i have been recieving lots of BSOD's Most of them are IRQL not less than Equal then memory management I have tried doing the driver verification only to have it consitantly loop which is what it supposed to do for me to then turn it off in safemode I have also done a system restore with the same thing to happen I have also tried using Driver uninstaller DDU and reinstalling my driver for my gtx I have also tried reseating my gfx card Oh and i did a complete reinstall yesterday only to find a blue screen when i came home from being out for hours Essentially im out of idea's and i need some help with what this is Attached is my log collector dump if some one could please decipher and let me know which bit of hardware i need to send to a farm upstate Thanks in advance DESKTOP- E TRRQ-Mon zip

A:IRQL , Pool Curroption , Memory management HELP!

<ToolVersion>10.0.10240.16384</ToolVersion>
<LicensingStatus>SL_LICENSING_STATUS_NOTIFICATION</LicensingStatus>
<LicensingStatusReason>0xC004F034</LicensingStatusReason>
<LocalGenuineState></LocalGenuineState>



It looks like you do not have a genuine windows.
You're license might be valid (i don't know) but is certainly not activated.
Please fix this first.

Forum rules

4) No piracy or discussion of piracy allowed at all. Such as software, music, videos and other intellectual property violations (e.g. downloading youtube videos locally etc).
According to forum rules, we can not help you until this is resolved.
When you have this sorted out, we will be happy to assist!!

http://www.tenforums.com/bsod-crashes-debugging/46172-irql-pool-curroption-memory-management-help.html
Relevancy 52.46%

Hi, I have not installed any new hardware nor made any (as I can recall) significant changes software-wise. Nevertheless the last couple days my work at the computer has been interrupted by various BSODs. I have looked around on the internet for a fix for my problems but have not encounterd anything that helped me. Any help is greatly apreciated!

A:Various BSODs the last day, Memory management, bad pool header etc..

Hi Radanle.

Free up the startup. Windows does not need any other program to auto start with it, but the auto start programs often conflicts and causes various problems including BSODs.
Click on the Start button
Type ?msconfig (without quotes), click the resulting link. It will open the System Configuration window.
Select the ?Startup? tab.
Deselect all items other than the antivirus, and if you need Speech Recognition there, keep it.
Apply > OK
Accept then restart.
If possible, update the BIOS to Version 1202 dated 2011/10/10 from ASUSTeK Computer Inc. -Support- Drivers and Download P6T Deluxe V2.

Code:
BiosVersion = 0504
BiosReleaseDate = 05/19/2009
Test your RAM modules for possible errors.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes, preferably overnight.

If it start showing errors/red lines, stop testing. A single error is enough to determine that something is going bad there.

Let us know the results.
_________________________________________________________________________________________

Code:
BugCheck 19, {3, fffff8a0145d6670, fffff880145d6670, fffff8a0145d6670}

Probably caused by : Pool_Corruption ( nt!ExDeferredFreePool+cbb )

Followup: Pool_corruption
--------------------------------------------------------------------------------
BugCheck 50, {fffffa80c3352abb, 0, fffff800032ad8b5, 5}
Could not read faulting driver name
Probably caused by : memory_corruption ( nt!MiAgeWorkingSet+52b )

Followup: MachineOwner
---------

http://www.sevenforums.com/bsod-help-support/312487-various-bsods-last-day-memory-management-bad-pool-header-etc.html
Relevancy 52.46%

Hi Everyone I've been searching as much as i could here and there on the internet without any luck so i'm giving it a chance here if someone has an idea how to troubleshoot investigate this I'm Running Windows Update Enterprise custom built machine I K gb ram Samsung evo pro gb ssd x gtx sli the installation was done around constantly memory Pool increasing Paged end of january i don't have much running on that computer but games i have another system for work The issue i have is the Paged Pool memory after system is up is at roughly mb but keep increasing around - mb per sec and never stops after roughly h uptime i'm already at Paged Pool memory constantly increasing gb after Paged Pool memory constantly increasing day uptime yesterday i was at gb The non-paged pool is however never an issue and sits between mb and mb i would say normal values i've read about disabling NDU disabling killer networks application my network driver and many other things but Paged Pool memory constantly increasing so far still no luck i'm willing to run any kind of software or give any traces my main issue right now is how to find what is causing this i believe there is a memory leak somewhere but i have no idea clues how to trace it down Many thanks for your time and help cheers BuG

A:Paged Pool memory constantly increasing

Hello BuG,

With 32 GB of RAM installed, it's not unusual for your page file to get just as large.

If you like, you could use step 11 in the tutorial below to specify a minimum and maximum page file size for your C: drive to prevent it from getting larger on it's own. If you get a low memory or out of memory error afterwards while running Windows, then it means that you will need to increase the size of the page file until you stop getting the error.

If you have plenty of hard drive space, then it is recommended to leave the page file to be system managed though.

Virtual Memory Paging File - Change

Hope this helps,
Shawn

http://www.eightforums.com/performance-maintenance/45714-paged-pool-memory-constantly-increasing.html
Relevancy 52.46%

Hey all this is my first time posting here Memory Paged Pool Effects/How to Adverse Fix so please be gentle I like most gamers comp sci majors have fallen in to the trap of trying to get Half-Life to play on my laptop and am Paged Pool Memory Adverse Effects/How to Fix dealing with paged pool memory issues I followed a solution on a previous Paged Pool Memory Adverse Effects/How to Fix forum and went in to the registry editor changing the PagedPoolSize like so Quoted from the previous site http www halflife net forums showthread php t quot This is how to fix it Here's how you open Registry Editor Start Menu gt Run gt regedit Surf down to this key HKEY LOCAL MACHINE SYSTEM CurrentControlSet Control Session Manager Memory Management Double click on quot PagedPoolSize quot Hexadecimal is listed first Change the quot Value Data quot to one of these below Note You only need to enter EITHER Hexadecimal or Decimal They both are the same Megabytes Hexadecimal Decimal Mb c Mb Mb I went with the Mb option and it worked perfectly Once you are done make sure you reboot your computer quot I followed this solution with the Mb option restarted the computer and the computer didn't even load all the way the first time and after shutting down and restarted it again I barely got to the Desktop with nothing really running So I painfully went in and changed it back to the default setting like it was before and I restarted it and MOST of it is fine again but I am still getting a few adverse effects such as when right-clicking on anything on the desktop the menu does not appear right away and you have to scroll down with the mouse to see any of the menu items on it For example right clicking on the background you have to move the mouse down in order to see the Arrange Icons by Refresh Paste etc options I do not see any other adverse effects right off hand other than it takes a little bit longer to boot up the laptop it takes a little longer to do anything anymore I don't think I have to reinstall Windows or anything like that but is there anything else I can possibly do to make my laptop to run as normal again and get rid of some of the adverse effects as described I would be greatly appreciated by a quick response If you need anymore information about the situation do not hesitate to ask and thank you very much

A:Paged Pool Memory Adverse Effects/How to Fix

As this article says, 'Do not change the size of the paging file by editing the registry.'

http://technet.microsoft.com/en-us/l.../cc738265.aspx

Since you did play about, perhaps making a manual change as per the instructions will help 'kick' things back to normal.

Click start, control panel, system, advanced, performance, advanced and under virtual memory click change, then custom size, and set the vRam to whatever value you like (I would recommend equal to the installed Ram as a start) min and max. Click set and ok your way out.

You can always go back and set things to letting Window decide.

http://www.techsupportforum.com/forums/f10/paged-pool-memory-adverse-effects-how-to-fix-386233.html
Relevancy 52.03%

A vulnerability has been identified in Microsoft Word, which could be exploited by attackers to take complete control of an affected system. This issue is due to a memory corruption error when handling a malformed document, which could be exploited by attackers to execute arbitrary commands by tricking a user into opening a specially crafted Word document.Products: Office 2000 and XPExploits: Discovered as a 0-day. The vulnerability is currently being actively exploited.A brand new Word vulnerability affecting the 2000 and XP versions has been discovered. Please continue to be careful with all Office documents you may find attached to email messages:Microsoft Word - Memory Corruption Vulnerability being exploited http://www.microsoft.com/technet/security/...ory/933052.mspxhttp://secunia.com/advisories/24122/http://www.frsirt.com/english/advisories/2007/0607http://secunia.com/cve_reference/CVE-2007-0870/http://www.avertlabs.com/research/blog/?p=199

A:Microsoft Word - Memory Corruption Vulnerability & Exploit

I always see the wording "malformed document" in those notices from M$. What does it mean? Who malformed it? How? When? Me ?????

http://www.bleepingcomputer.com/forums/t/81523/microsoft-word-memory-corruption-vulnerability-exploit/
Relevancy 52.03%

Over the course of the last few months I have been Multiple Recent Corruption, BSOD's. NTKRNLMP.EXE Memory CI.DLL, getting random BSOD's and crash's I leave my PC on and most of the time it runs great once it finally gets booted A few times recently I'll leave it at the desktop overnight and come back the next day to find a BSOD At some points it takes me - times of powering on and off to finally get it to boot into windows otherwise it just BSOD's most of the time Each BSOD shows a different code as well I tried memtest i let it run for about hours It had either or complete pass's and errors Im not sure if its a hardware failure software clashing or driver issues Computer was customer built by myself about years ago Any help would be great appreciated as its really frustrating At times I have to sit for about minutes and hit the power button numerous times to get windows to finally boot It's also been running much slower than usual I have ESET NOD Recent Multiple BSOD's. CI.DLL, Memory Corruption, NTKRNLMP.EXE AV if that makes a difference No Wifi on this computer either Attached is the zip of my dump files and other information I hope Recent Multiple BSOD's. CI.DLL, Memory Corruption, NTKRNLMP.EXE I posted this correctly

A:Recent Multiple BSOD's. CI.DLL, Memory Corruption, NTKRNLMP.EXE

Eset can be a cause of BSOD's. Remove and replace with Microsoft Security Essentials to see if it provides more stability. Uninstallers (removal tools) for common antivirus software - ESET Knowledgebase

Microsoft Security Essentials and Malwarebytes, both recommended from a strict BSOD perspective.

Microsoft Security Essentials, Free antivirus for windows

Malwarebytes Anti-Malware Free



   Information
DO NOT start the free trial of MalwareBytes. Deselect the option when prompted.

Hard Drive/Storage

Post a screen shot using Crystal Disk Info: CrystalDiskInfo Standard Edition

How to Upload and Post a Screenshot and File in Seven Forums

Make a hard drive test from the hard drive manufacturers website: Hard Drive Diagnostic Procedure

Daemon Tools/Alcohol %

Code:
Start Menu\Programs\DAEMON Tools Lite Public:Start Menu\Programs\DAEMON Tools Lite Public
Uninstall DAEMON Tools and/or Alcohol % software. It uses a driver called sptd.sys which is known to cause BSODs in Windows 7. Uninstall the software using Add/Remove Programs. Reboot the system. Once the program is uninstalled, run sptd.sys uninstaller to remove the driver from your system.

As an alternative, many people recommend the use of Total Mounter or Magic ISO

SFC scannow

Check windows for corruption:

SFC /SCANNOW Command - System File CheckerClick on the Start
Scroll to Accessories
Select Command Prompt > Right click and Run as Administrator
Type
Code:
SFC /scannow

Start up

Keep less stuff at the start-up. Only anti-virus, this helps avoid driver conflicts and improves time to log in to windows.

Troubleshoot Application Conflicts by Performing a Clean Startup
Startup Programs - Change

-Blow out all vents with canned air (DO NOT use a vacuum cleaner or an air compressor, they can damage the components).
-Ensure that the fan comes on and is blowing air out of the vent (may not happen at startup, but should happen after using it for a while).

Temperature

For monitoring heat of the system, use Speccy or HWMonitor:
Speccy System Information
HWMonitor

Check for a BIOS update.

Code:
BIOS Version/Date Award Software International, Inc. F10, 2/5/2010
Stress Test

Hardware - Stress Test With Prime95: Hardware - Stress Test With Prime95

CPU - Stress Test Using IntelBurnTest: CPU - Stress Test Using IntelBurnTest

Video Card - Stress Test with Furmark: Video Card - Stress Test with Furmark

Monitor temperature of the system during the tests: Speccy - System Information - Free Download

Hope this helps for now

http://www.sevenforums.com/bsod-help-support/288609-recent-multiple-bsods-ci-dll-memory-corruption-ntkrnlmp-exe.html
Relevancy 52.03%

Hi there,

My laptop has been crashing randomly for no apparent trigger. But a noticeable cycle is ~ every 12 days.

Every time is the same error: "faulty hardware corrupted page"

So I try using memtest86 but with no luck (10 passes all gd)

Then I use windows debugging tool to read memorydump. It said is a 'hardware error'

But I am not sure am I using the tool correctly, also there are too many stuff I have no idea....

So if anyone can help analyse the memory dump is greatly appreciated

Please see attachment for memory dump, it is create using the tool provided in post "BSOD - Posting Instructions"

Thanks for reading this post! Thanks in advanced for any reply

http://www.tenforums.com/bsod-crashes-debugging/65547-bsod-random-crash-possibly-memory-corruption.html
Relevancy 52.03%

Hi, a freind of mine if havinging some probs with his comp. Here's the info. Hopefully someone can help.

He has a 2.8 amd athlon 128 graphics card and 512ram (He doesn't know the ram type)

His prob:

"Well my computer occasionally resets itself for no reason. Every game I play performs an error so I have to shut down the game. Sometimes when I turn on my pc it tells me my system has failed the memory test and on 1 of my games it tells me i cant play because of memory corruption."

I have attached a screen shot of the error he gets when a game crashes.

Thanks

http://members17.clubphoto.com/_cgi...ow.pl?album_item_id=35653433', '520', '600');
 

A:Game crashes, memory corruption, pc reboots without warning...

https://forums.techguy.org/threads/game-crashes-memory-corruption-pc-reboots-without-warning.161616/
Relevancy 52.03%

Hello all!

Built a system in January, solid as a rock ever since. Started ripping my dvd collection a week or two back, and started getting BSOD's after the third or fourth movie I ripped. Have posted my system stats elsewhere on the net and basically think that my ram is bad. Can this be confirmed? Also, assuming my BSOD's are ram related, is what I've attached to this post enough information to make a guess as to WHY my ram is going bad all of a sudden? The BSOD's only happen when ripping DVD using Handbrake.

Else where on the net, a forum reported to me that a memory leak can occurr between my Norton Security Suite and my Cisco VPN client. Can anyone confirm?

Edit: Running Win7 x64 on an AMD Phenom X4 965, 4 gb of Geil ddr3 (used to be 8), a Kingston SSD, HIS Radeon HD6850, and Jetway HZ03-GT-LF motherboard. Thanks.


Thanks so much,
G

Relevancy 52.03%

It seems I have the absolute worst luck with this laptop because here I am again with another virus or something This is my Dell C laptop Windows XP I have this ANG Antivirus program which -- Virus lack a or corruption or Malware memory?! virtual something and of my computer Malware or a Virus or something -- corruption and lack of virtual memory?! practically forced me to buy via consistant popups and lack of any other sort of virus protection etc and Spybot Search and Destroy which I thought was working pretty well Spybot started to send me these popups which like an idiot I didn t fully read There was an ALLOW button and a DENY button and I think for about three of them I hit Allow and basically Malware or a Virus or something -- corruption and lack of virtual memory?! allowed all kinds of Malware into my computer Now my programs exit out by themselves any type of Anti-Malware Spyware anything becomes corrupted the moment it s saved to my computer so I can t use it everything s freezing programs already on my computer such as Add or Remove Programs won t open are corrupted shut themselves off and it s a mess On top of that I keep getting a little pop up saying I m out of virtual memory I m wondering if that s actually relevant or if that s just my laptop being a jerk on top of anything else Help would be much appreciated My computer technician takes multiple days to get my laptop back to me whenever I bring it to him - - nbsp

https://forums.techguy.org/threads/malware-or-a-virus-or-something-corruption-and-lack-of-virtual-memory.835615/
Relevancy 52.03%

Hey there I'm having Memory Crash Bsod, Random Dump Corruption random BSoD's anywhere from a couple hours to a day or so Not exactly sure when they started happening since the computer used to reboot itself I changed that so I could see the stop error Here's a small history of some problems I'd been having prior to the BSoD's I had been using Nintendo's WiFi USB Connector by Buffalo and had many problems with it mostly with not connecting to the internet using the Nintendo Random Bsod, Memory Corruption Crash Dump Wii and DS but my computer also randomly froze completely no reset no blue screen nothing with no indication of why Usually it was just sitting on the desktop with nothing running but my Firewall and basic utilities see under Software This happened at random times usually at night and had happened while I was at the computer as well I talked to Nintendo and they told me not to use Spy-bot Ad-aware or AVG I took them off although I really didn't want to and I still had the problems So I am in the process of sending that back and have completely uninstalled all of the software included with the USB WiFi connector I had the exact same problem with a rd-party WiFi USB connector WiFiMAX before this BTW the Nintendo tech Representative I spoke to was kind of a prick you just don't whisper F k on a customer call and didn't seem to know what he was talking about sounded like he was reading off of a screen Here's the next piece of history I upgraded the RAM from MB to GB maximum allowed on the motherboard and also to the maximum speed allowed PC- when it was previously PC- I think I started having the blue screens at this time So I took the new RAM out replaced it with the old ram again I'm very careful about static discharge although I do not have a wrist strap But I still had blue screen problems at this time the computer was resetting So I replaced the RAM again with the new RAM since I didn't think it was a RAM problem Now since then and I'm not sure if I had the BlueScreens during the time I had the WiFi connector sorry I've been having nothing but problems with random blue screens The computer usually runs very well DOOM Ultramode with no Antialiasing is surprisingly smooth and I also ran MEMTEST just to be sure I wasn't having problems with the RAM passes no errors I had been using Avira Antivir as was a friend of mine He was having very strange computer problems so he uninstalled Antivir and his computer is fine I tried the same thing but it didn't help Avast seems ok though so I kept it on the computer Anything you can do to help will be more than appreciated since I've been tearing my hair out for several weeks on this It has gone days without BSoDing before but they always come back Below is my computer description HijackThis log Crash dump and CPUz Registers dump Software Windows XP Professional SP Avast Ad-Aware Personal no resident Spy-Bot Search and Destroy with Tea Timer Comodo FirewallSiSoftware SandraHijackThisDebugging Tools for WindowsCPUzComputer Custom Built CPU GHz Pentium Northwood Socket mPGAMB BioStar P VTB http www biostar-usa com mbdetails asp model p vtb Phoenix BIOS RAM GB GB sticks G Skill DDR PC- HDD GB Hard drivesSoundcard Creative Audigy EX With external box Video Card MB XFX NVidia GeForce GT AGP XPrinter Brother HL- Black Laser PrinterWebcam Logitech QuickCam MessengerSpeakers Crappy oldInternet Cable - Mbps BendBroadband comModem Motorola SB Surfboard Cable ModemDVD -RWDVD not connected One more thing The crash dump is usually very inconsistent but lately it's been mostly quot memory corruption quot and ntoskrnl exe Not sure what to make of it THANK YOU in advance p s sorry about the monstrous post HijackThis log Logfile of HijackThis v Scan saved at PM on Platform Windows XP SP WinNT MSIE Internet Explorer v Running processes C WINDOWS System smss exeC WINDOWS system winlogon exeC WINDOWS system services exeC WINDOWS system lsass exeC WINDOWS system svchost exeC WINDOWS System svchost exe... Read more

A:Random Bsod, Memory Corruption Crash Dump

I'm not sure why someone moved my post to the "Hijack this Logs and Analysis" area, since it's only for posting HijackThis logs. I'm having STOP errors, and my post concerns the Crash dump more than anything else. If someone could please move it back to a more appropriate area, I would appreciate it. Also it would be nice if I was notified that my post was moved, not sure how this works though (or who even moved it?)Here is a Crash Dump from today. The STOP error occurred while playing Diablo II (barely even 1 minute), and stated that LVMVDrv.sys was at fault. During the blue screen the music was going crazy and making strange grinding noises and repeating.__________________________________________________________________Microsoft ® Windows Debugger Version 6.7.0005.0Copyright © Microsoft Corporation. All rights reserved.Loading Dump File [C:\WINDOWS\MEMORY.DMP]Kernel Summary Dump File: Only kernel address space is availableSymbol search path is: SRV*c:\Program Files\Debugging Tools for Windows\Symbol Path*http://msdl.microsoft.com/download/symbolsExecutable search path is: Windows XP Kernel Version 2600 (Service Pack 2) UP Free x86 compatibleProduct: WinNt, suite: TerminalServer SingleUserTSBuilt by: 2600.xpsp_sp2_gdr.070227-2254Kernel base = 0x804d7000 PsLoadedModuleList = 0x8055a620Debug session time: Wed May 16 09:43:00.468 2007 (GMT-7)System Uptime: 0 days 4:19:24.072Loading Kernel Symbols...................................................................................................................................................Loading User SymbolsLoading unloaded module list.........................................******************************************************************************** ** Bugcheck Analysis ** ********************************************************************************Use !analyze -v to get detailed debugging information.BugCheck D4, {b7d74ff0, 2, 1, 804f7ec3}Probably caused by : rdbss.sys ( rdbss!RxpWorkerThreadDispatcher+18a )Followup: MachineOwner---------kd> !analyze -v******************************************************************************** ** Bugcheck Analysis ** ********************************************************************************SYSTEM_SCAN_AT_RAISED_IRQL_CAUGHT_IMPROPER_DRIVER_UNLOAD (d4)A driver unloaded without cancelling lookaside lists, DPCs, worker threads, etc.The broken driver's name is displayed on the screen.When possible, the guilty driver's name (Unicode string) is printed onthe bugcheck screen and saved in KiBugCheckDriver.An attempt was made to access the driver at raised IRQL after it unloaded.If kernel debugger is available get stack backtrace.Arguments:Arg1: b7d74ff0, memory referencedArg2: 00000002, IRQLArg3: 00000001, value 0 = read operation, 1 = write operationArg4: 804f7ec3, address which referenced memoryDebugging Details:------------------WRITE_ADDRESS: b7d74ff0 CURRENT_IRQL: 2FAULTING_IP: nt!KeTerminateThread+6a804f7ec3 894204 mov dword ptr [edx+4],eaxDEFAULT_BUCKET_ID: DRIVER_FAULTBUGCHECK_STR: 0xD4PROCESS_NAME: SystemTRAP_FRAME: b4cf0c0c -- (.trap 0xffffffffb4cf0c0c)ErrCode = 00000002eax=b7df4fec ebx=00000000 ecx=b7df4fcc edx=b7d74fec esi=886583c0 edi=8a6c0660eip=804f7ec3 esp=b4cf0c80 ebp=b4cf0c98 iopl=0 nv up ei ng nz na pe nccs=0008 ss=0010 ds=0023 es=0023 fs=0030 gs=0000 efl=00010286nt!KeTerminateThread+0x6a:804f7ec3 894204 mov dword ptr [edx+4],eax ds:0023:b7d74ff0=????????Resetting default sco... Read more

http://www.bleepingcomputer.com/forums/t/92323/random-bsod-memory-corruption-crash-dump/
Relevancy 52.03%

The error occurs in the calloc with this comment next to it This command triggers the error on the second iteration of the outermost while loop The comment is self-explanatory notes Note that the size of struct menu is bytes This program is written in ANSI C NOT C Please help me here I spent a day on this bug Table of Contents -Pertinent Functions -menus the file that I am getting interface data from -console output the output from the console from the instance of corruption memory (very malloc the specific issue) entire program struct vertex int x int y struct menu char name Name of the menu this represents malloc memory corruption (very specific instance of the issue) File Edit etc char children Pointer to begining of an array of strings in which the children names are held New Open etc int child count Number of children are in the menu int menu width Width of the menu struct vertex origin char delete newline char malloc memory corruption (very specific instance of the issue) char str char read ptr str while read ptr n amp amp read ptr NULL read ptr sizeof char if read ptr n read ptr Change the newline char to a NULL string terminator return str void draw interface Bool for click processing static struct vertex origin static Bool menu open int this click on menu Number of menus clicked on if more than one is invalid click float xRot f yRot f float circle size f float current pos f int i int j int k int chars written int menu dropdown offset static int menu number Number of the menu clicked on int desired menu raster pos is x is y y is currently unused int width render context nWinWidth int height render context nWinHeight float aspect float render context nWinWidth float render context nWinHeight char string holder char szString MENU ITEMS quot File quot quot Edit quot quot View quot quot Selection quot quot Tools quot quot Windows quot quot Settings quot quot Documentation quot quot About quot char default children DEFAULT CHILDREN quot Padding quot quot Child quot quot Child quot quot Child quot char temp Used as needed to hold values to be parsed etc struct menu menus MENU ITEMS GLfloat raster position char name char child FILE menu desc menu desc fopen quot resource menu menus quot quot r quot if menu desc NULL printf quot error quot fflush stdout exit i while i lt MENU ITEMS printf quot fault here d quot sizeof struct menu fflush stdout menus struct menu malloc sizeof struct menu name NULL name char calloc sizeof char fscanf menu desc quot s quot name name delete newline char name Delete the newline character menus- gt name name while ungetc getc menu desc menu desc c Reads the character and puts it back to check if we are done with children child NULL while child NULL child char calloc sizeof char fgets child menu desc child delete newline char child Delete the newline character menus- gt children j- child printf quot d quot j printf quot n s n quot menus- gt children j- fflush stdout j j fgets temp menu desc printf quot fault is here on the second iteration quot fflush stdout temp char calloc sizeof char This command triggers the error on the second iteration of the outermost while loop menus- gt child count j - The child count is the children read from the file minus the padding fgets temp menu desc k atoi temp menus- gt menu width k i fclose menu desc printf quot s s s s n quot menus - gt name menus - gt children menus - gt children menus - gt children define GL PI printf quot f quot aspect switch to drawing d with distortion allowed glDisable GL DEPTH TEST glDisable GL LIGHTING make static window render context nWinWidth render context nWinHeight draw the D interface here GLfloat x y z angle Storeage for coordinates and angles Save matrix state and draw the interface glPushMatrix glTranslatef f float render context nWinHeight- f f Draw the stuff behind the menu bar text glPushMatrix Draw the boxes behind the menu items Do the drop shadow glPushMatrix glColor f f f f Shadows are black for i i lt MENU ITEMS i while j... Read more

Relevancy 51.6%

Hi - running patch current Windows and am having an ongoing but not always constant issue regarding how much memory I have available to me on any given boot of Windows I have GB of memory installed on the computer and yet almost GB of that is not available to me and is shown as Hardware Reserved when I look at the Physical Memory in the Resource Monitor I have validated the memory is error free through multiple runs of Memtest have removed memory strips and blown out any possible dust from memory slots and SOMETIMES it properly will show me around GB available however most boots it is showing pretty consistently that GB is flaged as Hardware Reserved I did some searching and have tried some of the suggestions such as making sure the Maximum Memory box is not checked in MSCONFIG and have also tried editing nbsp ClearPageFileAtShutdown in the Registry to change it from the default value of ' ' to a new value of ' ' nbsp Nothing has worked thus far I DO need access to as much of that GB of memory as possible due to this computer using huge amounts of memory as a Digital Audio Workstation recording music with huge volumes of samples loaded fully memory Reserved Windows half shows as of Approximately but full and detected by memory installed BIOS Hardware into memory nbsp Approximately half of installed memory shows as Hardware Reserved but full memory detected by BIOS and Windows Performance suffers greatly when half of what is installed is not available I have also looked in the BIOS for any ways to adjust video memory and memory mapping and neither exists in the BIOS at all for me to try anything with nbsp The CPU happens to be an AMD A with multiple cores and video is embedded in the CPU with no way Approximately half of installed memory shows as Hardware Reserved but full memory detected by BIOS and Windows for me to control its memory usage Thanks in advance for any additional suggestions Bob Bone

https://social.technet.microsoft.com/Forums/en-US/4997e518-4bfd-4266-bf39-ac7f79620d5e/approximately-half-of-installed-memory-shows-as-hardware-reserved-but-full-memory-detected-by-bios?forum=w8itprogeneral
Relevancy 51.6%

I have a Compaq Presario running windows XP and 1G of RAM with a game that said the paged pool memory was to low. I subsequently reset it via the " run regedit" and now no applications will run and the computer has to be physically shutdown by holding the on/off button. The error message I get is "you do not have the required memory to run this application". How do get back to normal?

Thanks for the help.
 

A:Solved: OS Paged Pool Memory Reset to high

Restore the registry. System Restore is the easiest way.
 

https://forums.techguy.org/threads/solved-os-paged-pool-memory-reset-to-high.793004/
Relevancy 51.6%

Hey guys I have no programs running just chrome with a couple of websites On my previous pc with windows i've never had the memory use more than GB just for chrome Also the paged pool seems to fill up the longer I use my pc I've read numerous threads with people saying that it is normal for a pc to use all the RAM because otherwise it's useless RAM But I - paged in leak Windows problem Memory pool 8.1 don't really Windows 8.1 - Memory leak problem in paged pool believe that something like this is normal In most threads people talked about a Windows 8.1 - Memory leak problem in paged pool memory leak in the non-paged pool I find it also very weird that when I look at my processes they Windows 8.1 - Memory leak problem in paged pool just don't add up to the GB in use Using rammap or process explorer doesn't show annything at all Here are my specs Lenovo B Windows -bit Build Intel Core i - M CPU GHz CPU's MB RAM Games I'm having real problems with League of Legends I just get too much lag when I play I have a constant ping so that's not the problem my fps is - so that's not really bad But I just get these random stutters every few seconds Also when I browse my pc is just acting too slow for it's specs I hope someone can help with this problem as I am a noob when it comes to computers I paid about euros for this laptop and I find it sad that I this stupid problem I've already disabled superfetch and I really don't want a link to another thread as I've read every single one of them and I'm getting nuts Thanks

A:Windows 8.1 - Memory leak problem in paged pool

Hello SebaaVH,

You appear to be one of those affected by this Google Chrome bug that only affects "some." Now, since I don't know if they ever fixed it (I don't use Chrome), I would suggest trying a different browser (i.e., Firefox or Opera) to see if that fixes your issue. Now, some have stated they fixed their issue by clearing their browser cache but that would be just a band-aid IMHO:

Massive memory leak, though memory usage does not show for GC in task manager:
https://productforums.google.com/for...lp/xOQqvfK78sM

Regarding your League of Legends issue, I don't play it myself but your issue (or something similar) has come up several times quite recently and, if you do a Google search for that issue, you will find tons of people having issues when playing it online. You might be better off seeking assistance at a gaming forum for that specific issue IMHO.

Good luck.

SpringUpdate

http://www.eightforums.com/performance-maintenance/45045-windows-8-1-memory-leak-problem-paged-pool.html
Relevancy 51.6%

Hi all i will try and type this as fast as i can before it crashes. lol

Ive ran memtest and chkdsk with 0 errors found. I also did a malwarebytes scan and have a clean bill of health.

Ive been getting them for the past week with different errors. Hope fully someone can help me with this as its driving me crazy!!

Sorry for being short just need to post before it crashes, it happened once already.

Thanks in advance

ooops forgot i attached the zip too.
Thank you!

A:Many different BSOD's. Memory management, bad pool header, chkdsk etc.

Hi RugerBaby.

The zip is incomplete. Please try SF Diag Tool and upload the resulting zip with your reply post.

http://www.sevenforums.com/bsod-help-support/370709-many-different-bsods-memory-management-bad-pool-header-chkdsk-etc.html
Relevancy 51.6%

Heyo all It's been three days that I've memory pool increase nonpaged Downloads usage. trying to solve this problem and right now I have no idea what to do next I noticed that my memory usage would get Downloads increase nonpaged memory pool usage. very high as time went on Windows would use GB by itself with no processes accounting for this This also caused a bluescreen at one point with a Kernal inpage error I've checked in process explorer and the All Users section of task manager but the RAM usage amounts don't add to the total usage All of this memory is in my Nonpaged pool and after further searching I've found that it increases whenever a program is downloading something from the internet I've updated my Ethernet port's drivers but that has had no effect whatsoever I've tried tdsskiller combofix and ran a scan with Avast and Malwarebytes All of which have found no problems Any help would be greatly appreciated it's annoying to have to reboot my PC every hours if I have a download running

A:Downloads increase nonpaged memory pool usage.

Open the Task Manager and look in Processes and watch to see if a specific process is increasing in its use of memory.

http://www.bleepingcomputer.com/forums/t/556801/downloads-increase-nonpaged-memory-pool-usage/
Relevancy 51.6%

First post here let me know if I need to include anything else and thanks in advance I have been getting memory management BSODs left and right but I have seen a kernal security check failure and a bad pool header This has been happening since before I upgraded from to so I'm guessing it's hardware In Win I started getting BSODs mainly while playing games Management, also + Kernal mostly BSOD: Memory Pool Header since that is what I use it for mostly Chrome also crashed a lot I figured I put something on there I shouldn't have so I decided to wipe it and start fresh with a my student copy of Win With a clean slate SSD and HDD formatted the problem was still there However in Win I could see that it was a memory management error I looked it up and learned about checking my RAM so I ran Windows Memory Diagnostic which didn't find any error and memtest which crashed every time Tested my RAM in another system and it passed Long story short after RMAs and sending parts in I'm sitting with a new motherboard and cpu and the problem is still there Components and what if anything I've done to BSOD: mostly Memory Management, also Kernal + Pool Header test them Old CPU AMD FX- Current CPU AMD FX- brand new With the new cpu but old motherboard memtest still crashed Old Motherboard Gigabyte GA- XA-UD Current Motherboard ASRock Fatali ty FX Killer brand new After swapping the motherboard memtest now completes GPU ASUS EAH DC DIS GD V Radeon HD I don't know how to test this I made sure the drivers were up to date PSU Cooler Master GX - W Used a DMM to test every pin it works fine I also tried putting another psu in from a different working system and the BSOD: mostly Memory Management, also Kernal + Pool Header problem persists RAM G SKILL Ripjaws Series GB BSOD: mostly Memory Management, also Kernal + Pool Header x GB DDR Passes windows memory diagnostic and memtest SSD OCZ Agility AGT - SAT - G HDD Seagate Barracuda Green ST DL TB RPM Disk check doesn't show anything wrong with these I was able to update the firmware on the SSD but trying to update the HDD crashed I've tried disconnecting each one to use only the other but the problem persists Optical Drive Samsung X DVD Burner SATA Model SH- BB BEBE - OEM don't know if this matters but it's connected so maybe I have attached the zip file from the SF Debug Tool I can add some MEMORY dmp files and minidump files if that will help Again let me know if I need to do something differently And thanks for the help

A:BSOD: mostly Memory Management, also Kernal + Pool Header

This might be a stupid question to ask, but have you tested each stick separately for at least eight passes using Memtest86+?
RAM - Test with Memtest86+ - Windows 7 Help Forums

http://www.eightforums.com/bsod-crashes-debugging/60880-bsod-mostly-memory-management-also-kernal-pool-header.html
Relevancy 51.6%

I have a second hard drive in my PC that only has data on it. All of a sudden when I try to delete files on it I get the BSD. Not all the files, some delete with no issues. Others cause this problem. I have defragged the drive and checked it for errors. I have two of the DMP files that were created but this site says I'm not permitted to upload this kind of file. Can anyone help me?
 
Thank you!

A:Beginning Dump of Physical Memory - Bad Pool Header

to the Bleeping Community SteveZ73  . I have two of the DMP files If there are latest created minidumps under C:\Windows\Minidump folder, please post the latest dmp logs (atleast 5) by :Note : If dmp logs from minidump folder is not allowed due to security or admin permission problem, disable UAC control temporarilyor see this link.> Highlight (holding ctrl key) and choosing the latest dmp logs by hitting enter or left mouse click.> Right-click and choose send to desktop.> When on desktop, highlight all dmp logs and right-click and send to compressed zipped folder.> Upload and share the link by registering here https://www.box.com/* minidumps log sample 010613 - 16676 -01.dmp -> 01 is for month - 06 for day - 13 is for year.* If you use any 3rd party software such as Ccleaner, please uncheck the minidumps box so as not to remove the dump files next time. Try downloading Speccy and then install the program.  To post and publish a snapshot of your PC.. In the Menu bar, click File -> Publish Snapshot. Click Yes > then Copy to Clipboard. On your next reply, right-click on a empty space and click Paste on reply box then click Post. Download MiniToolBox and run the program. SelectList Last 10 Event Viewers, List Installed Programs and List Users, Partitions and Memory Size then click Go.A notepad will open then copy-paste the report on your next reply.

http://www.bleepingcomputer.com/forums/t/544763/beginning-dump-of-physical-memory-bad-pool-header/
Relevancy 51.6%

I am using a Dell Latitude D620 (laptop) running 1.6 Ghrtz and 3.24 MB of RAM. I have been getting blue screened about once every 2 hours. Per the instructions--I have updated the BIOS (I think). I have updated all of the drivers, but I am still getting the screen. Below is posted the error info sent to Microsoft--edited for content

Any suggestions? What else should I do? Is it hopeless? Thanks in advance!

A:Blue Screen Driver Corrupted Pool Memory Used...

Try disabling your anti-virus. It has been known that some antivirus software consumes a lot of page pool memory.

http://www.bleepingcomputer.com/forums/t/170776/blue-screen-driver-corrupted-pool-memory-used/
Relevancy 51.6%

Hello, as my title suggests, I am getting lots of BSOD's and freezing, specifically, I've been getting Bad Pool Caller, Memory Management, Page Fault in Nonpaged area, reference by pointer, and system service exception just to name a few. These crashes and freezes happen at seemingly random times, and do not appear to be related to what I am doing, whether it be browsing the internet or gaming Here are the system specs, bought December 2010, it worked well for the first few months. Of course attracted below is the BSOD dump and system health report. Thanks for any help.

A:Many BSOD's, Bad Pool Caller, Memory Management, and freezing.

Many of these issues are being cause by your ati video card drivers and ati catalyst suite please update them from here:
AMD Graphics Drivers & Software make sure you put in all the right specs.
Also please run Memtest86 and test your ram following this tutorial:
RAM - Test with Memtest86+
and last please check your disks by running chkdsk to check for any errors.

http://www.sevenforums.com/bsod-help-support/184921-many-bsods-bad-pool-caller-memory-management-freezing.html
Relevancy 51.6%

I've been having this problem for ages. After ive played on a different game for a while, i then try to play tf2. loads up properly, i choose a server and just as im about to connect - pow! crashes to desktop and says im out of paged pool memory! i thought it was cos i didnt have enough ram or not enough of it was free. so i upgraded my ram to 2gb. i have 1500MB of ram free at any one time and it still does the same thing!! the stupid thing is, when i restart the pc and go on tf2 before any other game, it works fine! what on earth is going on here?
 

Relevancy 51.6%

I have been getting some BSOD's for the past month or so. These are the three errors that I have received ... Memory Management, PFN_List_Corrupt and Bad Pool Header.

To try and solve the problem I have so far swapped the hard drive and reinstalled the OS (Win7 64). I also ran Memtest 86 on my ram. It ran all night and didn't find anything but I am thinking that perhaps I should test it one chip at a time. I have 3 4GB sticks of Tri channel memory so that is why I am thinking maybe they should be tested individually.

It is possible it is a driver but I have a pretty vanilla set up so I am a bit lost. I really hope it isn't a motherboard at this point. I am pretty tech savvy but I am struggling so I came here to beg for your wisdom.

I attached the dump file as directed.
Thanks!

A:BSOD Memory Management, PFN_List_Corrupt and Bad Pool Header

Hi,

The bugchecks you're getting mostly refer to memory. So go ahead and test the sticks individually on different slots and let us know the results.

http://www.sevenforums.com/bsod-help-support/260329-bsod-memory-management-pfn_list_corrupt-bad-pool-header.html
Relevancy 51.17%

Hey, I've been getting these two error messages and a third that comes up rarely [if I remembered I would tell you]. If you can help me solve my problems that would be I would be eternally grateful.

A:BSOD Memory management and bad pool header no specific trigger

Memtest86+
Run Memtest86+ for at least 8-10 passes. It may take up to 20 passes to find problems. Make sure to run it once after the system has been on for a few hours and is warm, and then also run it again when the system has been off for a few hours and is cold. How to Test and Diagnose RAM Issues with Memtest86+



   Note
Pay close attention to part 3 of the tutorial in order to rule the faulty RAM stick out.



   Tip
Do this test overnight.

http://www.sevenforums.com/bsod-help-support/290211-bsod-memory-management-bad-pool-header-no-specific-trigger.html
Relevancy 51.17%

So I recently purchased a new motherboard CPU RAM and PSU I kept things from my old computer such as my hard drives and video card I formatted my main hard drive that I keep Windows on and used to run x but am now running x I did this all for Borderlands I wanted a better computer to run and play this game on since I ve been Loss? Paged Memory Multiple Crashing, Pool Programs a fan of the first one since it came out Prior to the installation of all of these new parts everything on the older version of my computer worked fine I could play games albeit on low settings without a problem but now games such as Dota and Borderlands will run for about - minutes before the screen goes black Multiple Programs Crashing, Paged Pool Memory Loss? and comes back three times before the program itself stops responding One of the games gave me a reason as to the poor performance and said the game had run out of Paged Pool Memory and would decrease performance Even when doing so it still shuts down after a few seconds I know that this is a hardware problem which is why I didn t post about it in Games It s happening to many programs that require the use of memory and not just games If there s anything anybody can do to help me it would be greatly appreciated Below is a DXDiag ------------------ System Information ------------------ Time of this report Machine name JIMMUS-PC Operating System Windows Ultimate -bit Build Service Pack win sp gdr - Language English Regional Setting English System Manufacturer System manufacturer System Model System Product Name BIOS BIOS Date Ver Processor Intel R Core TM i - CPU GHz CPUs GHz Memory MB RAM Available OS Memory MB RAM Page File MB used MB available Windows Dir C Windows DirectX Version DirectX DX Setup Parameters Not found User DPI Setting Using System DPI System DPI Setting DPI percent DWM DPI Scaling Disabled DxDiag Version bit Unicode ------------ DxDiag Notes ------------ Display Tab No problems found Sound Tab No problems found Sound Tab No problems found Sound Tab No problems found Input Tab No problems found -------------------- DirectX Debug Levels -------------------- Direct D retail DirectDraw retail DirectInput retail DirectMusic retail DirectPlay retail DirectSound retail DirectShow retail --------------- Display Devices --------------- Card name NVIDIA GeForce GTX Ti Manufacturer NVIDIA Chip type GeForce GTX Ti DAC type Integrated RAMDAC Device Key Enum PCI VEN DE amp DEV amp SUBSYS DA amp REV A Display Memory MB Dedicated Memory MB Shared Memory MB Current Mode x bit Hz Monitor Name Generic PnP Monitor Monitor Model Acer X H Monitor Id ACR Native Mode x p Hz Output Type DVI Driver Name nvd dumx dll nvwgf umx dll nvwgf umx dll nvd dum nvwgf um nvwgf um Driver File Version English Driver Version DDI Version Driver Model WDDM Driver Attributes Final Retail Driver Date Size bytes WHQL Logo d Yes WHQL Date Stamp Device Identifier D B E E- - CF-E A- FC C Vendor ID x DE Device ID x SubSys ID x DA Revision ID x A Driver Strong Name oem inf NVIDIA SetA Devices NTamd Section ci ven de amp dev Rank Of Driver E Video Accel ModeMPEG A ModeMPEG C ModeVC C ModeWMV C Deinterlace Caps CB - - - E - C DB Format In Out YUY YUY Frames Prev Fwd Back Caps VideoProcess YUV RGB VideoProcess StretchX VideoProcess StretchY DeinterlaceTech PixelAdaptive F F DA - B - B F- D -C E EAAB Format In Out YUY YUY Frames Prev Fwd Back Caps VideoProcess YUV RGB VideoProcess StretchX VideoProcess StretchY A A C -C EC- BD - EDE-F C DC B Format In Out YUY YUY Frames Prev Fwd Back Caps VideoProcess YUV RGB VideoProcess StretchX VideoProcess StretchY AA E- - A - C - F FAF E E Format In Out YUY YUY Frames Prev Fwd Back Caps VideoProcess YUV RGB VideoProcess StretchX VideoProcess StretchY DeinterlaceTech BOBVerticalStretch CB - - - E - C DB Format In Out UYVY UYVY Frames Prev Fwd Back Caps VideoProcess YUV RGB VideoProcess StretchX VideoProcess StretchY DeinterlaceTech PixelAdaptive F F DA - B - B F- D -C E EAAB Format In Out UYVY UY... Read more

Relevancy 51.17%

Hey So I think I've found the fault as when I try to boot Vista from both a CD USB it blue screens and comes up with STOP x DE with the message quot A driver corrupted pool memory used for holding pages destined Bad Suspected - Vista BSOD Memory / Pool Corrupted Driver for disk quot If I boot from the HDD it BSODs too and is a problem with quot winload exe quot however I BSOD Vista - Suspected Bad Driver / Corrupted Pool Memory am pretty BSOD Vista - Suspected Bad Driver / Corrupted Pool Memory sure if I can get rid of this problem BSOD Vista - Suspected Bad Driver / Corrupted Pool Memory driver all will be okay However as it won't boot I can't disable the problem driver nor system restore I suspect the problem occured after Windows Update did an update Anyway my problem is the above So how can I disable drivers or system restore without using Windows' built-in functionality on a CD USB I assume there is other software I can burn to a CD USB I just don't know what Naturally as this is likely a one-time use free software would be preferable Thanks in advance

A:BSOD Vista - Suspected Bad Driver / Corrupted Pool Memory

Okay it gets stranger, I burnt a completely fresh Vista Recovery Disc and threw that in... it came up with the winload error again. I really don't know what to do, to get past that error... as it doesn't seem to want to load ANYTHING.

http://www.techsupportforum.com/forums/f299/bsod-vista-suspected-bad-driver-corrupted-pool-memory-641714.html
Relevancy 51.17%

Hi I recently have been having constant BSODs within the past month or so that at first seemed graphics related I am not sure what the problem BSOD Header) Pool Recent errors Management/Bad (Memory is but any assistance would be greatly appreciated Specs OS Windows Ultimate x SP MB ASUS M A XTD EVO AM CPU Recent BSOD errors (Memory Management/Bad Pool Header) AMD Phenom II x Deneb GHz RAM GB G Skill Ripjaw Series DDR x GB Originally GB See Below VID Sapphire RADEON HD GB HDD GB Hitachi SATA Primary TB WD Sata Secondary PSU Thermaltake Toughpower W PSU Originally I had thought this to be a graphics card issue because I had Recent BSOD errors (Memory Management/Bad Pool Header) a prior GeForce GTX die on me It was replaced by a GeForce GTX Superclocked and I was still experiencing BSODs After that I ran Memtest to test my ram and it came back with no errors I only ran the test for a few hours so I am wondering if I did not test thoroughly I ended up purchasing another GB and just replacing the original RAM The machine still continued to blue screen so I figured it wasn't a memory problem and installed the original GB of RAM I am still continuing to receive x A Memory Management and Bad Pool Header errors Any help that I could get would be greatly appreciated

A:Recent BSOD errors (Memory Management/Bad Pool Header)

Typical Memtest86+ runs should be done with at least 7 consecutive passes.

Nothing here is conclusive so far. I recommend you start Driver Verifier to see if it's driver related.

So far my biggest suspicion is hardware. One of the crashes mentioned code corruption where one solitary bit was lost. Often memory failure is not the cause of solitary bit problems, but they still have the potential to do so, in which case you'll want to run Memtest more. Usually, however, this is caused by either a failing Motherboard, CPU or PSU, or one of the components are overheating.

You can check with overheating using HWInfo with Sensors only enabled. Log two 30 minute sessions: one for idle, and one for high load (gaming, benchmarks, etc.). Send to use for viewing.

http://www.techsupportforum.com/forums/f299/recent-bsod-errors-memory-management-bad-pool-header-623763.html
Relevancy 51.17%

I built a computer last week and everything seemed to be going fine until earlier this week when I had a BSOD while surfing the internet and running Folding Home on my CPU and GPU I didn't BSOD Memory Page Fault Pool Bad Management, Header, think much of it until I got another BSOD the next day maybe while playing DiRT The first two BSOD's gave me the Memory Management error so I downloaded Memtest and ran passes with no errors I then got another BSOD while trying to play the Kerbal Space Program Demo and running F H on both the CPU and GPU This gave me the quot Bad Pool Header quot error I tried several things after this BSOD including flashing the motherboard BIOS to a newer version and uninstalling and reinstalling my video card drivers I also ran a GPU memory stress test and a minute Furmark stress test on the GPU thinking BSOD Memory Management, Bad Pool Header, Page Fault it might be my problem No issues I booted up the computer today thinking that my problems might be solved and left the computer running all day with F H on full on the CPU BSOD Memory Management, Bad Pool Header, Page Fault and GPU I started the KSP Demo again and got the Page Fault BSOD within about seconds of opening the game I'm at a loss as to what to do next Thanks for taking the time to read through my issues and a big thanks for any help you can give

A:BSOD Memory Management, Bad Pool Header, Page Fault

Hi waharvey.

Before doing anything else, uninstall AVG following http://www.avg.com/us-en/utilities. Use Microsoft Security Essentials as your antivirus with windows inbuilt firewall, and free MBAM as the on demand scanner.

Download, install and update those, and then run full system scans with both of them, one by one; as the installed antivirus is failing.

Let us know the results. Will decide about the further steps after seeing it.

Code:
BugCheck 19, {3, fffffa8006662d80, 0, 0}

*** WARNING: Unable to verify timestamp for avgmfx64.sys
*** ERROR: Module load completed but symbols could not be loaded for avgmfx64.sys
Probably caused by : Pool_Corruption ( nt!ExDeferredFreePool+a53 )

Followup: Pool_corruption
---------

http://www.sevenforums.com/bsod-help-support/323599-bsod-memory-management-bad-pool-header-page-fault.html
Relevancy 50.74%

Hi all Thanks in advance for reading any help is appreciated Experienced several BSODs during the past few weeks A few separate quot explanations quot for the crash shown on the blue screens may suggest a memory problem attached corruption; related likely Diag file to SF memory BSOD, dump quot SPECIAL POOL DETECTED MEMORY CORRUPTION quot quot BAD POOL HEADER quot quot IRQL NOT LESS OR EQUAL quot A dump file created using the SF Diagnostic Tool is attached Some additional information BSOD, likely related to memory corruption; SF Diag dump file attached The computer contains two sticks of RAM each DDRIII GB SODIMM If it helps the text on the label of each stick includes quot BEFMHGO- other characters Memtest was run with both sticks in the PC i e neither was removed before running and a single error was found with the following characteristics Tst Pass Failing address bc - MB Good bc Bad bc ff Err-Bits Count Chan blank System Restore was attempted but could not restore the computer to BSOD, likely related to memory corruption; SF Diag dump file attached a previous instance Windows Defender Offline was also run and also failed providing the following error quot The program's service has stopped You can start the service manually or restart your computer which will start the service Error code x ba quot Also ran BlueScreenView which identified ntoskrnl exe as a potential issue although we weren't able to follow this up I hope that at least some of the above is relevant Any help is sincerely appreciated

A:BSOD, likely related to memory corruption; SF Diag dump file attached

Welcome to SevenForums.

Recommendations:


Code:
MSC "c:\program files\microsoft security client\msseces.exe" -hide -runkey Public HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Run
Start Menu\Programs\Norton Internet Security Public:Start Menu\Programs\Norton Internet Security Public
Note that you have Microsoft security essentials installed but keeping two antiviruses such as NIS (which is often a cause of BSOD-s itself) would cause conflicts. Please uninstall Norton and keep MSE while troubleshooting. You may however, install Norton back if we know it was not contributing in the crashes. (you’ll have to remove MSE though).

Drivers that need to be updated: / or reinstalled.

Method: Click on the Start ► Control Panel ► Programs ► Uninstall a program ► Uninstall everything related to; the particular programs mentioned below. Restart the system, delete remnants of its drivers/older drivers using Driver Fusion/Sweeper. Restart again if required.

Wacom HID Router Driver Source: Driver Reference Table

Code:
0: kd> lmvm wachidrouter
start end module name
fffff880`049ab000 fffff880`049c0000 wachidrouter T (no symbols)
Loaded symbol image file: wachidrouter.sys
Image path: \SystemRoot\system32\DRIVERS\wachidrouter.sys
Image name: wachidrouter.sys
Timestamp: Tue Mar 20 01:27:08 2012 (4F67888C)
CheckSum: 0001CEAC
ImageSize: 00015000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Intel(R) Wireless WiFi Link 5000 Series Adapter Driver for Windows 7 Source: Driver Reference Table

Code:
0: kd> lmvm NETwNs64
start end module name
fffff880`058aa000 fffff880`06116000 NETwNs64 T (no symbols)
Loaded symbol image file: NETwNs64.sys
Image path: \SystemRoot\system32\DRIVERS\NETwNs64.sys
Image name: NETwNs64.sys
Timestamp: Wed Jan 05 01:29:41 2011 (4D237525)
CheckSum: 00823E68
ImageSize: 0086C000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Intel Storage drivers Source: Driver Reference Table

Code:
0: kd> lmvm iaStor
start end module name
fffff880`01271000 fffff880`013c5000 iaStor T (no symbols)
Loaded symbol image file: iaStor.sys
Image path: \SystemRoot\system32\DRIVERS\iaStor.sys
Image name: iaStor.sys
Timestamp: Thu Jan 13 07:50:12 2011 (4D2E5A54)
CheckSum: 0007188C
ImageSize: 00154000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Graphics card drivers also need to be updated:

Code:
0: kd> lmvm atikmdag
start end module name
fffff880`04a05000 fffff880`05302000 atikmdag T (no symbols)
Loaded symbol image file: atikmdag.sys
Image path: \SystemRoot\system32\DRIVERS\atikmdag.sys
Image name: atikmdag.sys
Timestamp: Mon Feb 07 00:31:45 2011 (4D4EE911)
CheckSum: 008B4A84
ImageSize: 008FD000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Source: Download AMD Catalyst Drivers 12.10 Vista 64 - FileHippo.com
(Avoice CCC - Catalyst Control Center during installation.)

Run the System File Checker that scans the of all protected Windows 7 system files and replaces incorrect corrupted, changed/modified, or damaged versions with the correct versions if possible:SFC /SCANNOW Command - System File Checker
Run Disk Check on your hard disk for file system errors and bad sectors on it:Disk Check
Free up the start-up, nothing except the antivirus is usually needed.Startup Programs - Change
Troubleshoot Application Conflicts by Performing a Clean Startup
Check for a newer BIOS version:

Code:
BIOS Version/Date Hewlett-Packard 68SCF Ver. F.08, 26/08/2011
Let us know how it went.

http://www.sevenforums.com/bsod-help-support/264299-bsod-likely-related-memory-corruption-sf-diag-dump-file-attached.html
Relevancy 50.74%

Hello everyone,

Looking for some help on these issue. I just built a new system and have been having nothing but crashes. They don't happen when I'm doing anything in particular and sometimes happen right after I boot up. I have windows installed on a SSD drive.

I've tried reinstalling the OS, updated all drivers and BIOS, reseated memory and video card. I've also tried to install windows on a mechanical HDD as well. ntoskernel.exe seems to show up on all the crashes.

I've attached the file, please let me know if any other info is required.

Thanks!

A:BSOD's - MEMORY MANANGEMENT, BAD POOL HEADER, SYSTEM SERVICE EXC, NTFS

Whits

Lets run a memory test

RAM - Test with Memtest86+

If you have more then 1 memory sticks if it fails test every memory stick on every slot .

http://www.sevenforums.com/bsod-help-support/286424-bsods-memory-manangement-bad-pool-header-system-service-exc-ntfs.html
Relevancy 50.74%

Hello,

I have been dealing with all sorts of BSOD's for a long time now and dont have the money to just buy another computer so any help would be nice. They happen at random times ie: playing WoW surfing the internet or just while the computer is inactive. Thanks for any input

A:Multiple BSOD Bad pool header, memory managment, page fault plz help

Welcome
The cause of your BSOD appears to be a driver. Take Verifier test
Driver Verifier
I'd suggest that you first backup your data and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Windows 7 Startup Repair feature).

In Windows 7 you can make a Startup Repair disk by going to Start....All Programs...Maintenance...Create a System Repair Disc - with Windows Vista you'll have to use your installation disk or the "Repair your computer" option at the top of the Safe Mode menu .

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to crash to the Blue Screen. Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).

If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.
Driver Verifier - Enable and Disable

Send all reports of BSODs that occur during the next 36 hours, while using verifier.

http://www.sevenforums.com/bsod-help-support/244491-multiple-bsod-bad-pool-header-memory-managment-page-fault-plz-help.html
Relevancy 50.74%

Hello ive built my computer mid december it ran smooth to about may when ive been getting random blue screens of memory management. Then ive been getting other ones like Bad pool header, System service exceptions and something about a list corrupt. I also got a few other but i dont remeber what they were If you can help me thank you very much its been 3 months you dont know how annoyed im getting from this!!!

A:BSOD Memory Management, System Service Exceptions, Bad pool header,etc

Seems to be memory related.

Run for 8 passes.
Then test each stick in a good slot for 6 passes.
If you have dual channel, the results may be incorrect, if shows pass.
Guide to using Memtest86+ - Geeks to Go Forums

http://www.sevenforums.com/bsod-help-support/249436-bsod-memory-management-system-service-exceptions-bad-pool-header-etc.html
Relevancy 50.74%