Windows Support Forum

Win 10 Pro 14332 and Office 2016 - Outlook Install Issue

Q: Win 10 Pro 14332 and Office 2016 - Outlook Install Issue

Performed a clean install of Win 10 14332 and all is working well with the exception of installing my corporate MS Exchange email via Office 2016.

The issue is when I launch MS Outlook and provide the appropriate credentials (email, password, etc.) I receive the additional MS Security prompting for the corporate MS Exchange email/account (password (email or Domain account). The issue, even though the MS Security box is present I can?t click the field to enter the password and MS Outlook (32) goes into a Not Responding status in task manager ? see below.

Never had this issue in the past until this latest build ? installed successfully on every prior build. Any advice/direction would be appreciated.

Thanks

Relevancy 100%
Preferred Solution: Win 10 Pro 14332 and Office 2016 - Outlook Install Issue

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Win 10 Pro 14332 and Office 2016 - Outlook Install Issue

Sorry posted in wrong forum - mod please move to appropriate forum...

http://www.tenforums.com/installation-setup/48540-win-10-pro-14332-office-2016-outlook-install-issue.html
Relevancy 17.2%

Hi everyone A few days ago I replaced my cpu motherboard and hdds on my system OLD System main components Case Antec v Cpu i Mobo Asus onboard realtek mobo low crackling) bk volume (very ud3h sound ac1150 issue - and Gigabyte p x d-e RAM corsair vengence gb x GPU Zotac GTX Boot drive Intel Gigabyte ud3h bk mobo - realtek ac1150 onboard sound issue (very low volume and crackling) gb ssd Win HDD WD TB black New System main components Case Antec v Cpu i k Mobo Gigabyte z x - ud h-bk RAM corsair vengence gb x GPU Zotac GTX Boot drive Samsumg evo gb ssd Win HDD WD Gigabyte ud3h bk mobo - realtek ac1150 onboard sound issue (very low volume and crackling) TB black I was able to clone the ssd and hdd samsung migration for ssd and Easeus todo backup for hdd Initally I had some driver conflict when I Gigabyte ud3h bk mobo - realtek ac1150 onboard sound issue (very low volume and crackling) booted up the computer on the new mobo I managed to uninstall all the old drivers and then used the driver cd to install the mobo drivers and even updated all of them to the latest version I The conflict I m still having is with the back panel audio for the onboard sound I get very low volume and and crackling at certain frequencies tried on both my generic creative speaker and Audio technical headphones When I m plugging in the speaker into the green port and have it plugged in half way or accidentally touch the jack to the I o plate I get really strong loud static noise Here is the list of solution that I tried with no success Updated the Realtek HD Audio Manager app I e the one installed from the driver cd to the latest one Used DPC latency checker and it is showing all greens didn t test it for more than a minute though should I be doing something while the app is on to test for interference Installed Generic Realtek driver for ac codec Disabled C E and EIST in the bios Played with the equalizers on Realtek HD Audio Manager helped to reduce bit of static but its still there and the volume is still very low Disabled all line in devices Checked audio with a ubuntu live cd and the problem still persists does this indicate a hardware issue What I find strange is that my front panel that is connected to the HD audio pins on the motherboard works fine with the same speaker and headphones I still have some more solutions I need to test out like Update the bios currently on F version the latest is F I have a spare asus xonar dg PCI so will try to install it and test if audio will works fine But this is not a permanent solution as I only have one PCI slot which I m using for my wireless card adapter Edimax g Run Memtest can this ever be a problem for sound related issues Driver Sweeper I believe I have properly manually uninstalled all the mobo drivers but going try this app to be sure Can someone please point me in the right direction on how to solve this This is the first time I m installing replacing a mobo and cpu so should check if there is a wiring issue when I replaced all the parts back into the case Please let me know if more information is need to help resolve this I have a few more days left incase I have to RMA the mobo so any pointers would really be helpful before I decide to send it back if at all TIA Sreejit S nbsp

http://www.techspot.com/community/topics/gigabyte-ud3h-bk-mobo-realtek-ac1150-onboard-sound-issue-very-low-volume-and-crackling.217321/
Relevancy 16.77%

Hi Could anyone please confirm if I buy Samsung 850 Evo 500GB, will I be able to install this on my desktop? Just looks like it only fits for laptops?

Thank you
 

A:Samsung 850 Evo 500GB, want to install on desktop

There are adapters available if the drive doesn't come with them packaged. The adapters adapt from 3.5" drive bay to 2.5" drive bay.

http://www.newegg.com/Product/Produ...scription=hdd+adapter+bracket&N=-1&isNodeId=1
 

http://www.techspot.com/community/topics/samsung-850-evo-500gb-want-to-install-on-desktop.216637/
Relevancy 16.34%

Hi all,
I am new to this forum..
To start, I had just bought an ASUS computer.. wanting to play games like borderlands 1, left for dead 2 etc. But, when I was very trilled waiting to start the games, both of them had blacked screen and forced shutdown my computer every time after the game has been launched!
I had done many researches in the net, changing the registry values in directx11, reinstalling the NVIDIA drivers (halfway black screen upon reinstalling), changing the compatibility to Windows 7, adding missing physxcudart_20 to the games...None of them works..T-T
Any help is greatly appreciated!
 

A:Unable to install Nvidia driver and also to play games on Windows 8.1

I'd recommend to do the following:

Perform a clean install of Windows

Re-install Nvidia drivers
Download CPU-Z and GPU-Z (or any CPU and GPU monitoring software)
Monitor both while attempting to play games - check for temperature spikes.
Doing the above will help you rule out a lot of potential issues that are causing your problems. The clean windows install will get rid of any OS related issues. You never want to touch the windows registry unless you really have to, especially if you're not very well versed in the way it works. It can cause way more harm than good. With that said, the system crashes were probably due to a bad driver instillation and was causing a BSOD - most modern systems are set to restart / shutdown when this happens. You'll never know it happened unless you changed the configuration to stop the automatic shutdown. It could also be temperature related, if your CPU or GPU overheats, it'll typically trigger a system crash as well and result in the same BSOD sequence.

Let me know how it goes after you've tried what I've mentioned.
 

http://www.techspot.com/community/topics/unable-to-install-nvidia-driver-and-also-to-play-games-on-windows-8-1.213781/
Relevancy 31.39%

According to the latest reports, AMD will skip the problematic 20nm manufacturing node for their next-generation 'Arctic Islands' GPUs, which the company is expected to launch in 2016. Instead, Arctic Islands will progress directly to 14nm FinFET in the hope...

Read more
 

A:AMD to reportedly skip 20nm entirely for its 2016 GPU family

Sounds like a good strategy.
 

http://www.techspot.com/community/topics/amd-to-reportedly-skip-20nm-entirely-for-its-2016-gpu-family.212286/
Relevancy 30.96%

AMD's roadmap for the next two years has leaked, and it's filled with information about what the company is planning for their desktop and mobile CPU and APU lines. While 2015 will see a mix of 32, 28 and 20nm chips,...

Read more
 

A:Leaked AMD roadmap suggests all 2016 APUs will be 14nm

If it beats the Bulldozer family by a solid 5-10% in video games plus media encoding with reasonable prices, I am going to use it for all my builds.
 

http://www.techspot.com/community/topics/leaked-amd-roadmap-suggests-all-2016-apus-will-be-14nm.212540/
Relevancy 18.92%

Hello,

I need some professional help.
My computer:
AMD a10
4fb RAM
R9270x BY XFX
....
NOW, without the graphics card the computer runs fine. When I install the ddriver's for the r9 it will work, but eventually the display driver stopped working makes its way back.

I've ran all diagnostics on the memory and checked temperstures which all turned out to be fine.

I sent the card into xfx and they returned it saying it's fine.

WTF DO I DO MATES. I think it's the card....but that's just me.
 

http://www.techspot.com/community/topics/amd-and-display-driver-issue.212301/
Relevancy 18.49%

As the title implies I m currently having issues the first major issue is that my PC is turning on off and which the second is that my other hard drive suddenly up and Issue Invisible & HDD Computer Grounding disappeared on me My computer started to turn on and off on me for no reason while I was trouble shooting my initial problem of the HDD when I fiddled around inside my case Eventually ripping everything out of the case and quot card-boarding quot the motherboard which it worked and stayed on and as I gradually put everything back together it was all good until I sat the motherboard back onto the brass copper studs that sits inside the frame and screwed it in At that point my computer started to turn on and off again which lead me to believe it s some manner of a grounding issue Computer Grounding Issue & Invisible HDD I have no clue on what to do at this point about going about this should I just get a new case made of plastic My current full tower case is all steel While I was watching a movie which was stored on my second hard drive is started to freeze lag repeat all that good stuff on me It froze my computer up completely and I was force to hard reset the computer when I booted my PC back up I found that my second hard drive had up and vanished on me So I went into my bios and saw it quot working quot I switch to ACHI to see if it ll make a difference but I got a BSoD so I left it at IDE At that point my computer gave me the option to quot repair windoe files quot or start normally Both options made my computer get stuck on the loading screen thankfully safe mode boots up fine So what could had caused this and how may I go about fixing it nbsp

A:Computer Grounding Issue & Invisible HDD

I also swapped out the PSU with a spare I had lying around, didn't get any power from it so I reused my old one. Now I don't have power from that one either. So besides the "missing" HDD and a suddenly a "no longer working PSU "I'm assuming the motherboard is bad, opinions?
 

http://www.techspot.com/community/topics/computer-grounding-issue-invisible-hdd.211499/
Relevancy 18.92%

Ever since I setup a KVM switch to have 2 computers sharing 1 monitor/keyboard/mouse, I have had monitor problems.

There is a subtle but noticeable wobble/ wavey-ness thing happening across the screen when connected to one of my computers (my AMD).

Also, my display (with AMD computer) has a stretched horizontally look. I have tried different screen resolutions but they all give this stretched look which I didn't have before.

And my AMD used to give 1920 x 1080 as an option for max resolution, but this is now capped at 1600 x 1200.

Please help as this is very annoying & looks awful. The specs of the KVM switch say "Max. Resolution: 1920 x 1440. Bandwidth: 200MHZ"

My AMD computer:
Windows 7 64 bit SP1.
AMD Athlon II X4 620 2.6GHz.
4GB Ram.

Philips 226V3L.

Video card ATI Radeon HD 4350
 

A:KVM issue with monitor

What is the make and model of the KVM switch you purchased? I have tried lower quality switches at my work and found similar results. Ended up having to get one of the more expensive / better brand ones that solved the issues.
 

http://www.techspot.com/community/topics/kvm-issue-with-monitor.210931/
Relevancy 18.49%

My Dell has been acting up pretty recently (6 months old and still under warranty), and the battery does not charge past 80%. Once it get's near the 80% charge, it immediately fills up to 100%.

I've remembered using the laptop for more than 6 hours under moderate use but now it barely lasts 2 hours.

Please give me some advice because I'm really dependent on this laptop.
 

A:Dell Inspiron 3437 Battery Issue

You have 6 or 8 cells battery. If 6 it's normall. Should work about 2-max 3 hours when new. On 8 cells could work till 5 h.
Producers give only 6 months of warranty on bateries
 

http://www.techspot.com/community/topics/dell-inspiron-3437-battery-issue.210804/
Relevancy 17.2%

Hey guys, I've just upgraded my 5 year old pc with almost everything new. I got an Asus Maximus VII Ranger & an i7-4790k cpu & other new stuff except my graphics card & ram, 2 x 8gb Hyper X Fury 1600mhz. What I don't understand is reading the manual about the speed of ram I can install.

4 x DIMM, Max. 32GB, DDR3 3200(O.C.)/3100(O.C.)/3000(O.C.)/2933(O.C.)/2800(O.C.)/2666(O.C.)/2600(O.C.)/2500(O.C.)/2400(O.C.)/2200(O.C.)/2133(O.C.)/2000(O.C.)/1866(O.C.)/1600/1333 MHz Non-ECC, Un-buffered Memory *
Dual Channel Memory Architecture
Supports Intel® Extreme Memory Profile (XMP)
* Hyper DIMM support is subject to the physical characteristics of individual CPUs.

I would like to install higher speed rams like 2400mhz or higher if possible (are there even 3000++ mhz ddr available? Looking at my local shop, 2400mhz ddr3 is the highest) without overclocking but I'm lost at the " (O.C) " bit. Do I need to overclock them to get at that speed or can I just get rams that are made at that speed? Thanks!
 

A:Need info on RAM to install on new mobo

The OC means you will need to OC your motherboard to use RAM rated at that speed. If you are not planning on OCing, just get the 1600/1333 Mhz modules.

BTW the average person would never notice the differences in RAM speeds. Memory is not the bottleneck in computing.
 

http://www.techspot.com/community/topics/need-info-on-ram-to-install-on-new-mobo.210150/
Relevancy 18.49%

I recently got this amazing p monitor for my custom rig and I love it Well most of it There is this problem with the backlight where when the monitor turns on after a while of inactivity the backlight turns on Monitor Backlight ASUS an with Issue VK-248h for a split second Issue with an ASUS VK-248h Monitor Backlight then suddenly goes very dim Issue with an ASUS VK-248h Monitor Backlight The brightness setting Issue with an ASUS VK-248h Monitor Backlight is unchanged kept at a solid yet it s a quarter as bright as it should be I can go into the menu and change the brightness and I can tell faintly that it does adjust but never up to the proper level To remedy the issue I repeatedly turn the monitor off and on until the display finally lights up properly and it stays that way for the entire time I am using it At the start of the session in which I write this post I had to do this at least times before it worked so I finally decided to really look into this problem It seems this is a unique issue as I found absolutely no matching posts on the interwebs by searching with the all-mighty Google Search Is there anyone that can provide some insight as to why this occurs and or how to fix it Thanks for your time nbsp

A:Issue with an ASUS VK-248h Monitor Backlight

New theory: Bad capacitors... somewhere. Possibly power supply

After a day at work, observing some coworkers working on used LCD TVs (and working on one myself), I now understand quite a bit more about such things.

I had removed the display from my setup and left it on the floor for a few days. Today, I decided to try it again. The backlight started up perfectly fine, surprisingly. The ASUS screen showed for a couple seconds, then went off, as normal. Then, when it's supposed to activate the selected display input, it shows the screen for just long enough to get half a frame drawn, then goes completely black. Turning monitor off and on repeatedly, and trying different input methods, gave same result. I got it to work once, but at that time the backlight had gone too dim again.

I think now I might know how to fix it, but I can't for the life of me figure out how to take the dang thing apart! Lol.
 

http://www.techspot.com/community/topics/issue-with-an-asus-vk-248h-monitor-backlight.209650/
Relevancy 19.35%

Hi all,

I'm working on a XP machine. I think its slowness when installing apps (and also when its installation) is because of the HDD issue. Maybe there are bad sectors. I know that using C:\ drive properties -> tools, I can test the C: drive for bad sectors. But how to see the results!? It's wants me to restart the PC. Is there any log file after finishing of the test?
Is there any better way to find and solve the issue please?
 

A:HDD issue

The better way is to run a true diagnostic utility like SeaTools. Run a Long Generic test on the drive and see what happens (this will take a while).
 

http://www.techspot.com/community/topics/hdd-issue.209045/
Relevancy 19.35%

Hi All I have a strange one here I connect to the net via my Belkin router nothing special about the setup of the router My main pc however I have configured to use a static IP for downloading purposes I have used the same IPV settings for a number of years with no dramas Last night I switched on the PC and connected to the Internet but after a few minutes I got the no internet connection symbol yellow triangle I am connected via networking plugs also so tried the see if they were the issue but they are fine I ran the windows troubleshoot wizard and it came back with Your computer is trying to use a DNS server that is incorrect or doesn t exist I removed my static IP details and tried to connect by obtaining IP details automatically but this had no effect I used my phone s internet connection DNS Issue to google this DNS Issue and was advised to try which I then reinput my static ip details but this time putting the google dns settings and I can connect to the net The wierd thing is that my wifi will not connect to the net my DNS Issue question really is do I need to update the DNS setting in my router in order to get wifi working or should I be flushing DNS on pc the wifi is for my Ipad so not a lot DNS Issue I can do on that to connect Making my brain ache a bit sorry for the long post any help or advice would be appreciated Arvon nbsp

A:DNS Issue

Yes, you can set the DNS addresses in the router manually and then every device connected to that router will inherit your settings when they are configured to you DHCP
 

http://www.techspot.com/community/topics/dns-issue.208570/
Relevancy 18.06%

I m doing this on my Toshiba laptop at the moment and you ll see why later in this post Earlier today I acquired an ASUS Z C notebook and had noticed that the keyboard is acting rather strange Certain keys will also register other keys when pressed Here s which ones react this ASUS Issue Z54C/X54C Mapping Keyboard way letters are not case sensitive U will also register Zero will register registers registers R W registers S ASUS Z54C/X54C Keyboard Mapping Issue I I places a Date Stamp this might be the problem There may be others but I d like to move on to the behavior the way this behaves is if I press the key U then quot u quot or quot U quot will show up depending on ASUS Z54C/X54C Keyboard Mapping Issue if I press Shift or not The same thing happens if I press the key This is the same for all others if I press one or the other of these keys in question the other appears with it At first I thought this was a problem with the copy of Windows that was installed so I installed Windows Tech Preview I was going to do so anyway However this behavior did not go away Looking for help and I d be more than happy to resolve this problem I should note that not all keys behave this way but that the majority of them work fine It s just that this should not be happening to begin with I ve also pulled the keyboard out and inspected it I didn t see any dried fluids or any obstructions in the keys Should I perhaps consider replacing the keyboard Sadly I have no USB keyboards to see if the behavior is isolated to the laptops primary keyboard although using the On-Screen Keyboard doesn t elicit this behavior nbsp

http://www.techspot.com/community/topics/asus-z54c-x54c-keyboard-mapping-issue.208302/
Relevancy 18.49%

Have an unusual mark on screen at startup then green lines and pink but otherwise pc ok cannot upload jpeg image for some reason
 

http://www.techspot.com/community/topics/screen-issue-dell-1520.208131/
Relevancy 16.34%

HI all I am having problems detecting the Xonar Pheobus and have tried all and 5 Rampage Asus Phoebus Xonar issue Asus Extreme the pcie slots with no luck Red and the grey - even the shorter grey slot Have disabled the motherboard s HD onboard Asus Xonar Phoebus and Asus Rampage 5 Extreme issue sound too and still not detected in my devices The pcie cable is connected to the sound card and I have enough PSU to power all - Enermax W When the card is inserted to the grey slots - The red light Asus Xonar Phoebus and Asus Rampage 5 Extreme issue is seen through the control extension box Headphone Microphone Connector Asus Xonar Phoebus and Asus Rampage 5 Extreme issue box jack ports However the green light is NOT seen AND the Xonar Phoebus logo on the card itself is lit powered up However when I insert the card into the red pcie slots these lights are not on One this else I noticed is the card DOES go warm over some time so tells me it is not switched off I tried to install the driver and I get a message no card detected etc etc Is there anyone kind enough to advise me their BIOS settings etc who has managed to get the Xonar to work properly Did you have to adjust any BIOS settings from default to get the card to be recognised Printscreens would be cool if it is not too much of a bother Thank you in advance Kind regards Killershadow nbsp

A:Asus Xonar Phoebus and Asus Rampage 5 Extreme issue

The question(s) I have is ->
Am I missing anything when attempting to install the sound card? I have tried with no GPU drivers (including the Nvidia sound for the GTX 750 ti sc) / disabled onboard HD sound and still the sound card not detected.
Even in this motherboard, it should detect the sound card regardless of what sound source is set as default and then allow me to install it and set it as default (without messing about with the BIOS)?
Maybe my sound card has died when moving it from the last computer - Static death.....................
Thanks
 

http://www.techspot.com/community/topics/asus-xonar-phoebus-and-asus-rampage-5-extreme-issue.208076/
Relevancy 18.92%

Hello All I am having a bit of a strange issue that I have with CPU Motherboard or Strange issue never run into before Yesterday after getting home from the store I booted up my PC and started to play a game although I noticed that I was getting framerate stuttering It seemed to keep dropping a lot throughout my play So I started taking a look at some of my sensor utilities Strange issue with CPU or Motherboard When I opened Asus Probe II I noticed that it was telling me that one of my chassis fans weren t running Okay no problem it must have gone bad I than took at look at the frequency and noticed that my AMD FX- was only running at GHz per core I also checked CPUZ and had the same results So I booted to the bios just to take a look and noticed that it show my Chassis fan WAS running fine and that my frequency was at GHz per core as it should So I though that it must be a fluke Booted back into windows and again same issues So I shutdown and took the side off my case which is also where the Chassis fan it said was running is located Turned the computer back on and noticed the fan was running fine I logged into windows and noticed that seconds after windows logs in that one chassis fan turns off and the CPU underclocks to GHz multiplier All of the other fans in my case still running perfectly GPU running fine HDD s running fine Could it be possible that Asus probe II itself is underclocking my CPU If so what would be causing the fan to shut off My first thought was power-supply but I have no issues when stressing my hardware even in this state I am an IT consultant but have not run into this issue before Any help would be greatly appreciated PC Specs- ASUS m a r Motherboard AMD FX- CPU CoolerMaster HYPER N CPU Cooler Kingston HyperX Blu GB x Galaxy Geforce GTX Ti OC w PowerSupply Cougar Evolution Full Tower Case Samsung gb SSD Let me know if you need any other information nbsp

A:Strange issue with CPU or Motherboard

CPU temperature too high?
 

http://www.techspot.com/community/topics/strange-issue-with-cpu-or-motherboard.203184/
Relevancy 18.06%

So I have a Toshiba Portege r500 with no H/d & a second one for parts. When I went to take the H/D and pop it in I realized the H/D hook-up cables are different. The "parts laptop" has a "FMUSH1" cable connecting it to the sata drive. The newer Portege has a cable labeled " FMUPH2" (I'm assuming for an SSD?)

My Question is....Can easily swap them somehow or is there an adapter/converter possibly?

Thanks in advance for any possible help!
 

A:Fmuph2 HDD Cable Issue (Toshiba Portege R500)

So with more research I'm thinking I have a ZIF Tape (Cable) that previously connected to a 1.8 SSD which I now need to convert to a 2.5 sata connection.
I ordered a 24-Pin ZIF to SATA Adapter Connector Card off eBay. It comes with its own "ribbon" (Tape/cable whatever) as shown in the pic. Will I need to replace the ZIF from my mobo with it? or is it simply in case "you" need it?
Also just wondering could I have swapped out the sata ribbon (Fmush1) with the ZIF ribbon (Fmuph2) where they connect to the MoBo instead? (It's extremely difficult to get to on this model and the "clips" seem very fragile so I avoided attempting it)
 

http://www.techspot.com/community/topics/fmuph2-hdd-cable-issue-toshiba-portege-r500.207530/
Relevancy 19.35%

My pc was getting heated nd fan was a bit noisy.
so cleaned my fan in a shop .when I returned home hardly 10 min my pc worked then shut down
again I went der he saw fan was not moving he pushed it a bit nd it started moving it worked for me till this this evening but again when I shut it down fr a while it gave me the same issue I removed the keypad tried to move the fan with my fingers nd its working now .....
whats the main issue
 

A:Fan issue

The fan is old and needs to be replaced.
 

http://www.techspot.com/community/topics/fan-issue.207605/
Relevancy 18.92%

So I ve owned my P HM gaming laptop for around years now and for the most part I haven t had any issues However when I start my laptop it always defaults to booting off of the ethernet card even after switching my SSD to the position in the bios menu Normally this isn t that much of an issue as I can just cycle through the bios boot options using CTRL Laptop Boot issue ALT DEL The main issue that I am having now is that the last time I was using my laptop I used hibernate instead of the normal quot sleep quot or quot standby quot Now whenever I attempt to start my laptop up the message quot Resume from hibernate quot is on my screen which is normal except it tries to resume using the ethernet card If the laptop is in hibernate evidently I am not able to access the BIOS menu or cycle through my boot drives I have read that a way to fix this Laptop Boot issue might just be taking the battery out and letting any residual power that the motherboard might be running off of fade away over time I read that this normally only takes minutes or so I tried waiting minutes and it Laptop Boot issue didn t work so I just tried again but waited a few hours this time before putting the battery back in and attempting to start my laptop up The laptop is still attempting to boot from hibernate Does anyone know of any way to get to the BIOS menu from the hibernate screen Or does anyone know of anyway to fully shut off my laptop Laptop Boot issue to get rid of hibernate and just start up normally Any assistance would be greatly appreciated nbsp

A:Laptop Boot issue

it always defaults to booting off of the ethernet cardClick to expand...

This means that BIOS is not seeing any HD, marked Active and contains a bootable partition
 

http://www.techspot.com/community/topics/laptop-boot-issue.207645/
Relevancy 16.34%

Hello hello After having a problem with my cd dvd drive I rebooted my computer and did a clean install of Windows from my Vista So right now I m running Windows Windows not install (Touch/slider) FN - 7 Clean Keys working I have a VAIO - VGN-CS J Windows looks and feels great so far The only problem is my little sliding touch pad at the top doesn t work I don t know if it s FN keys but on top of my keyboard there s a little sliding touch pad for volume along with a fast forward rewind key I used to be able to slide the volume up from there but now it s not working I looked it up and I know this has to do with my clean install of windows I tried installing a bunch of drivers like everyone said online Sony Shared Libraries Vaio Event Notebook Control Device And a bunch of other drivers that people talked about I don t know what s wrong but it s still not working so I did a system restore to before I installed everything so that I can have a clean slate Can someone please help me fix my volume control slider please Thank you so much nbsp

A:Clean install Windows 7 - FN Keys (Touch/slider) not working

Laptops have extras over and above Windows and if you reinstall the OS or upgrade it you lose these. I've been there and done that with the FZ. It was broken when I bought it and the hard drive had been removed. Fixing the computer was very hard, installing Windows 7 was easy. Afterwards, like yourself I found that the function keys didn't work. Trawling forums and looking for drivers then sorting it out took ages and that was the most challenging part of the whole exercise. Everything necessary was on the Sony support sites but these were not user friendly and I needed to use several Sony sites. Needless to say Sony support were clueless. In the end I got everything functioning but if you can manage with things as they are I'd not bother. One tip, although it might not work with your particular Vaio model is that stuff has to be installed in a particular order otherwise some keys don't work.

That'll teach you to mess with Windows when a cd/dvd plays up.
 

http://www.techspot.com/community/topics/clean-install-windows-7-fn-keys-touch-slider-not-working.207046/
Relevancy 18.49%

I need help Okay so I hooked up all my parts last night with issue 560ti Crosshair and Video V Asus GPU to my ASUS Crosshair Formula V mobo and Video issue with Asus Crosshair V and 560ti GPU when I boot it will not show any video whatsoever No beeps no video no nothing I have a ti in there right now because I wanted to test it before my new came in that I ordered yesterday Video issue with Asus Crosshair V and 560ti GPU just wanted to see if the mobo was functional and all my other components were working Does anyone know why I would be getting no video I was thinking maybe I need to reset Video issue with Asus Crosshair V and 560ti GPU the CMOS Some people told me to check the BIOS but how do I do that if I have zero video on my screen Any help would be great as I am at wit s end with this stupid computer it has not run right since I moved and it is extremely frustrating putting all this time and money into this thing with no results I used to have a Corsair Liquid CPU cooler but the pump died and I finally got fed up with Liquid Coolers and went with a Noctua heat sink instead Going to do some more testing after work but was hoping to get some tips from you guys I have other ti s I can test to see if that card is just dead but it was like midnight and just decided to give up for the night last night Also My motherboard doesn t have an on-board video port I don t believe I see none at least My PC was up and running with drivers loaded for this exact card before it went down the computer has just been sitting there for months I am using the same hard drive only thing that has changed is the Noctua cpu cooler being in place of the now dead Corsair H All the fans are running the video card fan is running the psu fan is running so it seems like everything is getting power Any help would be greatly appreciated If you need more info please let me know nbsp

A:Video issue with Asus Crosshair V and 560ti GPU

Let's do this one step at a time, first no part of any computer lasts for ever. U said u had 2 other video cards, first, see if either one of them will work. If that does not work, it could be the slot in the mother board, try an other X16 slot. but honestly to me it sounds like the mother board is not working if u have a speaker plugged into it and assuming the speaker is working because normally there would be beeps if the motherboard is not sending a video signal.
 

http://www.techspot.com/community/topics/video-issue-with-asus-crosshair-v-and-560ti-gpu.206575/
Relevancy 18.92%

Hey, so I have an OCZ ZT 750 and its one of the units which runs 100% fan noise when ever im doing anything that requires the GPU, ive seen you can run the fan into a molex with a resistor to keep it constant, but what I want to do is, run it to my fan controller, just so I can ramp the fan up if needed, rather than nailing down the performance.

What I found is the fan is a 2 Pin connector, but fan controllers run 3 pins, am I able to run the 2 pin into the 3 pin on the fan controller and have control over it, or does the 3rd pin need to be connected for it to work?
 

http://www.techspot.com/community/topics/psu-issue-with-the-fan-pin-to-pin-connector.206390/
Relevancy 18.06%

Hello,

I just finished assembling my first build. At first it turned on without a hitch, was able to install windows and a few drivers.

I had to restart a few times, which went fine for the first few times, and then it just didn't boot back up. The power button doesn't do anything, the fans don't start, nothing happens.

When I jump the psu, all the fans start, so I'm thinking the issue must be with the mobo..

Here's a list of all the parts I'm using : http://ca.pcpartpicker.com/p/JFVvD3

Thanks.
 

A:Mobo issue? Custom build won't start anymore

First, are any wires touching that might be causing a short such as a wire touching the back of the mobo? Second, I had something similar happen to me a few years ago with a new build. There is a tried and true though often tedious way that can help diagnose possible issues.

1. Remove all hardware except for one RAM stick from the motherboard and this includes Sata and fan connections to peripherals such as your SSD, etc,

2. Now see if the system boots with only the one RAM stick. If it boots then shut down add the second stick of RAM and then reboot. If it boots then repeat by adding a piece at a time.

3. If is doesn't boot then it is either your mobo or your power supply. Also, check to see if your heat sink is seated correctly.

BTW, nice little system there.
 

http://www.techspot.com/community/topics/mobo-issue-custom-build-wont-start-anymore.205000/
Relevancy 18.92%

My brothers schoolwork laptop is frozen the problem occured like 2 days ago were the laptop seemed to be freezing for a couple of minutes and now when he trys to switch it on

Bios is not booting up.

and the only options he gets is launch in repair safe mode and start windows normally. which end up both the same in a black screen and a little black cursor with nothing to do but move the cursor.

after this happened my first reaction was for a complete format so I tried to install him a new copy of windows but my bootable device isnt even being recognized by the system it always ends up in the same screen for the windows startup.

edit ok so I dug a little more.psh..never had a laptop and found out the bios is on the asus logo screen.....well anyhow I booted up the system from the pendrive and the result is always the same the black screen with cursor only
 

A:Laptop Issue

The laptops hard drive has failed...
 

http://www.techspot.com/community/topics/laptop-issue.204852/
Relevancy 17.2%

I decided to upgrade my old hard drive to a new hard drive. When I tried to install Windows Xp on the hard drive it wouldn't let me. I have a Dell Xps 400 bought back in 2006.
The new HD is a WE 1tb. The error codes comes when I try to install windows xp on the hd. It says

I got a blue screen error after clicking enter at the screen where there is no partition found:
Check to be sure you have adequate diskspace. If a driver is identified in the stop message, disable the driver or check with manufacturer for driver updates. Try changing video adaptors.

Check with your hardware vendor for any bios updates. Disable bios memory options such as caching or shadowing. If you need to use safe mode to remove or disable components. Restart your computer, press f8 to select advanced startup options, and select safe mode.

Technical information:

Stop:0x0000008E (0X0000005, 0XF7419CAD, 0XF6FF17E4, 0X00000000)

Setupdd.sys ? address f7419cad base at F73ED000, datastamp 48025277
 

http://www.techspot.com/community/topics/error-on-trying-to-install-new-sata-hd.204857/
Relevancy 18.49%

I've recently built a new computer for myself and has been running perfect for a few months. A couple days ago whilst gaming/browsing my monitor went into power safe mode and shortly after my computer shut off, I tried to start up again only to have the same problem occur , the only old parts were a graphics card and psu, I just got in a new gpu and installed it successfully. Same problem occurs. All fans are running properly including the heatsink , processor core temps are around 39 , everything seems to be running ok? Thoughts?
 

A:Very strange custom computer issue

Check event viewer to see why it shut down.
 

http://www.techspot.com/community/topics/very-strange-custom-computer-issue.204679/
Relevancy 16.77%

I an trying ti install a video graphics card, when I plug in to my pci ex slot and plug in the leads the screen does not work, but the computer does, now I see that I have a pnp monitor but the card and a vga adapter on it, I have tried everything possible but cant get to work, anyone any ideas?????????
 

http://www.techspot.com/community/topics/trying-to-install-nvidia-quadro-nvs-259-on-windows-7.204678/
Relevancy 22.79%

Hi all

We're about to get fibre connected to our office building and the installation team have told us they'll be running Cat 7 cables to each office so we need to source a compatible router. I didn't even know there was a Cat 7 until last week, so don't know what I need to get!

I've been looking at AC Wireless routers but I have no idea if Cat 7 is compatible with them. Does Cat 7 use the same terminals as Cat 5/5e/6? Will I be fine going for a standard router or do I require something more specific?

Thanks in advance

EDIT: Now looking for recommendations on suitable routers, see post 3 for details
 

A:Fibre Router for Office

Same connectors as 5/5e/6, so any router that would be suitable for your office on 5e/6 will be fine for 7.
 

http://www.techspot.com/community/topics/fibre-router-for-office.203903/
Relevancy 19.35%

My mother in law gave me her old computer because it would start for a few seconds then stop and continue to repeat the process until she unplugged it. I only wanted it for the extra hard drive. After installing the hard drive into my computer (wanting to format it then clone it since it is larger than the one I currently have) it caused my computer to start and stop even being set as a secondary or slave. If I completely unhook it from my computer and start it up again, My normal set up works fine. Any ideas about what could cause this?
 

A:HDD issue

There is only one answer, the drive has gone bad. Chances are the rest of the machine may still be good.

Will the old machine attempt to boot without a drive? Does it come up to a boot drive not found error? If it does, the HDD was the whole trouble.
 

http://www.techspot.com/community/topics/hdd-issue.203400/
Relevancy 18.49%

First of all hello from a new user, I have a problem with my computer but I need help to nail it down to one part (I think it's the graphics card, but who am I to tell).
A friend of mine said people over here are very nice and competent so why not try to get help here.

Long story short, I played a game, Velvet Assassin, that is rather buggy (I.e. it didn't let me change the resolution to my native 1680x1050).
After some time the screen started flickering in complete white with some color bars here and there. I thought it was another bug on newer systems and changed the resolution; the problem seemed resolved.

Until my little brother started to play Forge of Empires, that little browser game, where the problem again occured at an even faster rate.

I hope you can help me, I made a short video of the issue, I know it's not of best quality, but maybe it helps.
Thank you in advance
 

A:Asus HD 6870, flickering issue

Have you tried updating your drivers? Also could you please post the make and model of your laptop /desktop and the system specs.
 

http://www.techspot.com/community/topics/asus-hd-6870-flickering-issue.203121/
Relevancy 16.77%

Hello all,

I've recently bought a HP Pavilion 15-n252sq laptop, with Free Dos - unfortunately I can't install Windows 7 over it, due to the following error I keep receiveing in the Installation screen:

"Select the driver to be installed" - and regardless of the paths I have and the available folders, I can not seem to proceed wtih the W7 installation.

Please notice that, I've tried to use both a W7 DVD and also a bootable USB drive (and yes, connected in the USB 2.0 port and not USB 3.0 ) - but I always get to the same point where I have to select drivers.

Please also notice that the BIOS doesn't allow me to make any modifications except for some minor ones (like select boot priority, or enable USB 3.0), as the rest of the MAIN features are greyed out .

Can anyone please help me with this issue?

Regards,
Adrian
 

A:HP Pavilion 15-n252sq - Can not install Windows over Free Dos

You may have to use a program Like KillDisk to reformat the drive. Then try installing your Win 7 DVD.
 

http://www.techspot.com/community/topics/hp-pavilion-15-n252sq-can-not-install-windows-over-free-dos.202523/
Relevancy 18.49%

My dad was putting some paper into his printer and had apparently put the paper in too far. When he tried to print something it jammed up and the printer had abruptly shut off. I have tried leaving it unplugged for a while and plugging it back in however, the printer WILL NOT turn back on at all.
 

http://www.techspot.com/community/topics/dell-3510-printer-issue.202348/
Relevancy 18.92%

Hi gang. My usb modem HAS to be unplugged then plugged in for it to work?
Even if PC is off when I do this it will automatically start/connect when windows(7) loads and will work normally. If I don't do this I can not get it to work?
'device mngr' shows it as an 'unknown device'?
I have reinstalled it to no avail.
 

A:USB wireless issue

Are you talking about a modem or a usb network adapter?
 

http://www.techspot.com/community/topics/usb-wireless-issue.201928/
Relevancy 19.35%

Hello. my rig is

fx 4100 4.53ghz
amd r9 270
corsair 600w gs600 gaming series psu
ocz vertex 3 90gb boot drive
240gb samsung 840 ssd
500 gb seagate hdd
1866mhz kingston hyperx ram
asus sabertooth fx990 r2.0
so my issue is this. I can overclock the r9 just fine, run benchmarks and whatnot. everything runs stable. I have clocked it as far as 1100 core and 1600 memory. everything ran stable on heaven and 3dmark vantage and things like msi kombustor to check for stability. as soon as I went into a game, it went bsod. so I figured ok. oc too high. I dropped it abit, tried again. same result. I continued reducing the core and memory till it went down to stock, and then it runs stable. any increase in core or memory by even 1 mhz, will cause it to crash in game. drivers are all up to date, bios, things like that all up to date. any suggestions as to why games don't like it? its multiple games as well. me1, 2, 3, swtor, wow etc. thanks
 

A:Gpu oc issue

Well if the overclock if causing the issue, chances are it can seem stable but then turn out to not be because a certain area is stressed more than on benchmarks or other games. Normally I would suggest working on bumping up the core clock first before memory and then checking stability because thats the easiest part to focus on at first. Memory can cause distortions and other issues like a BSOD just because you stressed it just enough to cause an issue.

Try moving just the core clocks and voltage up first, then work on the memory once you have that stable.
 

http://www.techspot.com/community/topics/gpu-oc-issue.201838/
Relevancy 18.06%

Hello everyone,

I'm having an issue connecting to my wireless network with my computer. Things were working fine until a few weeks ago when the wifi on my computer stopped connecting; now I can only get internet through a wired connection (although the fact I can do this is strange to me). My rooommate is not having any issues with the wireless whatsoever. I have a fairly new acer aspire s7 which has no difficulties connecting to any other wireless network while I am at campus or have gone home for the weekend. I'm at a loss as to how to fix this issue as it has become impossible to do any form of research while I am at home. Any help would be greatly appreciated.

-Jay
 

A:Laptop issue connecting to wireless internet but connects w/ LAN

Posibilities are your wireless signal is not in range or the wireless router is full of user who are connected to it, or it surpasses the user's limit.. how many user's has wifi connected to the wireless router?
 

http://www.techspot.com/community/topics/laptop-issue-connecting-to-wireless-internet-but-connects-w-lan.201675/
Relevancy 18.92%

PSU issue I think

heres what it is when I first installed this card (had a 500w antec psu) the comp was fine till I played diablo and poof shut off the comp via psu , so decide to get a thermaltake 2 600w and hook tht up now ot plays for a longer time
but does the same thing,I took the card back and got a new one of the same
same thing happens , so I decided to try a different approach and I have a psu I modded for xbox 360 tht is wired to stay on and I ran the card powered by tht and was able to play for hours and only 2 times it shut that psu off suggestions or now a psu tht doesnt get fooled so easy or what is really going on...lol thank you

 

A:PSU issue with evga gtx 660 superclocked

If you got a different video card and a different PSU, chances are there is something else wrong unless you got very unlucky and got another bad part from one of the two things swapped out.
My guess would be one of the following just from one you said:
The new PSU is bad as well
The CPU is overheating and shutting off
GPU could be overheating and shutting off (Though this is unlikely)
Those are just a few things to check, I would go into the bios and see what temp the CPU is running at while in there and decide if its running above what it should be. If that's not the issue I would try returning the PSU for a different one and see if that fixes the issue. Though the fact that the machine shuts off with 3 different PSU's points to a different part being an issue.
 

http://www.techspot.com/community/topics/psu-issue-with-evga-gtx-660-superclocked.201615/
Relevancy 18.92%

What command do I type in Command Prompt if I want to use Last Known Good configuration
 

A:Laptop recovery issue

Boot into Safe Mode (F8), that's where the option is located
 

http://www.techspot.com/community/topics/laptop-recovery-issue.201476/
Relevancy 17.2%

Hello all,

My friend has a Canon 3-in-1 MF 4010 (Printer-scaner and copier) device. He has lost the manual. Now, how can I see whether is it installed on the machine (Windows 7 32-bit) or not? And if it's not installed how to install it?
Thank you.
 

http://www.techspot.com/community/topics/how-to-install-the-canon-mf-40-10-3in1.201448/
Relevancy 18.49%

Hi All,

I am having a issue with my new router (Tenda W150D Router), its not giving me access for uploading any files through wi fi on my iphone 5s using app (Wireless Drive), even I tried the same with vlc upload feature in iphone still it doesnt work......

I think the issue is with the firewall in the router which I cannot access normally from the router setup...

guys pls help.. any comments are welcome
 

A:Tenda W150D Router Issue

Hmm; accessing a website is an outbound action thru the firewall on port 80.
A site with file uploading uses the same port 80 as normally used for surfing the web.

We need more data to analyze the problem
?What URL are you accessing for the upload?

from this "iphone 5s using app (Wireless Drive)", I assume the data moves this way:
ISP==router -- wifi to your 5S: using an app called Wireless Drive​?can you confirm this please?

?are you sure you're accessing the router and NOT attempting upload via the cellular connection?
 

http://www.techspot.com/community/topics/tenda-w150d-router-issue.201199/
Relevancy 18.06%

Hello, I'm new here. I'm trying to fix my sons Asus laptop. it won't connect wirelessly but will connect via ethernet cable. device manager has exclamation point beside network controller. I cannot download drivers for it. can you help?
 

A:Asus X53E network controller issue/no wireless

"I cannot download drivers for it"... Why? Can you get the driver from here:
http://support.asus.com/download.aspx?SLanguage=en&p=3&s=114&m=X53E&os=&hashedid=mDFYFQWEpTitMwA6
If the driver won't install, the Wifi card may be bad... Something that doesn't happen very often
 

http://www.techspot.com/community/topics/asus-x53e-network-controller-issue-no-wireless.201175/
Relevancy 18.49%

Hey guys I had some contractors doing some work on my house today and they needed to shut the circuit off to the room my computer was in The computer was on at the time so it shut off when the power was cut Now it won t go back on Power button does nothing at all and I don t know if it s the power supply mobo or switch I ve got a power supply tester which causes my computers fans to start up when it s plugged in so the power supply does respond not Power mobo button working... issue? The results are in the attached file It shows LL which means to low to register voltage for the - V line I honestly don t know if I even have that line so I don t know if that s bad I attached the label on my power supply too Would Power button not working... mobo issue? no voltage cause a computer to completely not respond Because the fans DO start up when the power supply tester is plugged in I don t think the switch is the problem because I tried to short the power switch jumpers with a paper clip and nothing happened I also took the CMOS battery out for a while and then tried it again and that didn t work Any ideas on whether I need a mobo or a power supply I don t have an extra PSU around to test with but I may try to find one before ordering a new mobo thanks in advance -mike nbsp

A:Power button not working... mobo issue?

Not the switch. Could be the motherboard or PSU, but I don't have any good insight.

I would unplug the PSU and flip the 120/240V switch to 240V, then flip it back before plugging it in. To me, this doesn't make any logical sense, but over about 16 years of playing with PCs I have seen it work twice.
 

http://www.techspot.com/community/topics/power-button-not-working-mobo-issue.201009/
Relevancy 16.77%

I bought a Samsung 840 SSD (120GB) for my gigabyte GA-770T-USB3 motherboard. I am unable to install win 7 64bit on it. It is a SATA SSD.

I have tried ACHD mode in the BIOS, I have tried IDE mode. The drive works as I have tested it as an external drive on other computers.

I bought the drive specifically to be used as a primary drive.

My regular hard drives work fine on the motherboard.
 

A:Unable to install SSD on Win7 x64 system

Well, first of all, your motherboard only supports 3GB/s and the 840 is a 6GB/s drive. Just by that you won't really get your moneys worth. And how so are you unable to install? Also can you please list your system specs?
 

http://www.techspot.com/community/topics/unable-to-install-ssd-on-win7-x64-system.190141/
Relevancy 18.49%

Hi all I m hoping you might be able to guide me in diagnosing what the problem is with my editing workstation Specs Microsoft Windows Professional -bit SP CPU Intel Core i GHz C RAM GB Triple-Channel DDR MHz - - - Motherboard Gigabyte Technology Co Ltd X A-UD Socket C Graphics MB GeForce GTX EVGA C Hard Drives GB Western Digital WDC WD HLHX- JJPV SATA C GB Seamus SATA GB Western Digital WDC WD EARS- Z B SCSI Disk Device SATA C Optical Drives PIONEER DVD-RW DVR- D ATA Device have attached rest of Speccy TXT file I ve had a range of problems from random BSOD to general instability slow downs rebuild, PC issue etc) numerous Help diagnosing (after reinstalls, to very slow internet to HDMI output of video card not working OCCT tests said occt core over maximum value I have formatted and reinstalled Windows twice tested no problems and even reseated ram - which seemed to work for a time Help diagnosing PC issue (after numerous reinstalls, rebuild, etc) When problems started again I bit the bullet and paid someone to check it rebuild update BIOS and reinstall Windows which AGAIN seemed to fix the problems for a time this was doubtless a waste of time and money It s caused so much grief that I d move on and buy an entirely new machine - but I m too stubborn I want to get to the bottom of the hardware issue which is hopefully a component that needs to be upgraded anyway and can get on with my life So I m hoping people can give me guidance to run tests and diagnose exactly what the hell is broken in this box Thanks in advance Morgan nbsp

http://www.techspot.com/community/topics/help-diagnosing-pc-issue-after-numerous-reinstalls-rebuild-etc.200246/
Relevancy 18.49%

I have a problem with a batch of Dell optiplex 980's, for some reason the Main boards fail at a alarming rate.

According to Dell it is the memory controller that fails.

Error Lights 1,3,4 are on nothing on screen, power led solid blue about 10 error beeps!

Dell tech replaced the main boards and all is fine for a while but same problem persists.

Also according to Dell level 6 tech, it could be over heating, I had some fun proving them wrong, two PC's sealed in a box , hammering them, Temp between 85 Celsius - 90 Celsius in the sealed enclosure, optical drive started melting, cooled the PC's for a day and powered back on, no problems!!

Does any one out there maybe have a issue similar to this on the optiplex 980, main board failures?
 

A:Motherboard failure issue on Dell Optiplex 980

Dell Optiplex 980 Lights 134 on no screen

Yes I have exactly the same problem. Turned PC on this morning lights 134 on plus blue power light but no screen at all. Still under warranty, phoning dell in the morning - I will keep you posted
 

http://www.techspot.com/community/topics/motherboard-failure-issue-on-dell-optiplex-980.169232/
Relevancy 18.92%

After Broni s series of attempts to help me in THIS THREAD he suggested that I may have a video chip or motherboard issue NOTE I am on issue motherboard Possible a Chromebook now and am trying to clean my fiance s laptop He just got it back from a local tech shop on windows reinstall - he downloaded some nasty viruses via email attachments we believe BAD BAD BOY and I tried to reinstall windows on my own times but the acer discs would not complete the reinstall so we took it to the shop By he d managed to get reinfected but I don t know if it was residual from the previous infection My latest thread to him following his instructions to go into System Recovery mode was After some Googling re not being able to start the Acer the only way I could figure Possible motherboard issue out how to get past the screen with several vertical lines comprised of the little horizontal lines like my earlier video shows let s call it my HVLinePattern for shorthand was to take out battery for over minutes while unplugged the whole time press down power for seconds plug back in reboot and I could F and F but NOT F At some point I got a single set of short beeps cpu failure wild guess per http www fixya com support t -acer aspire laptop problems booting I cannot seem to reproduce these beeps tho I tried to let the laptop Possible motherboard issue start up in regular mode and kept looping the acer logo with options to F or F at the bottom vs a brief flash of black screen until I powered it down with the power button I rebooted tried to F and got what I interpret to be long short beeps immediately followed by long short beeps immediately followed by long short beeps immediately followed by the HVLinePattern screen I powered down and rebooted then hit F chose boot by disc took a screenshot but it s in video format oops can add later if necessary hit F and changed to boot order screenshot on my google drive -bit ly foRTDf put my windows install disc in the drive recovery disc of crossed my fingers rebooted got what I interpret to be long short beeps immediately followed by long short beeps immediately followed by long short beeps immediately followed by the HVLinePattern screen I then took out battery for over minutes while unplugged the whole time pressed down power for seconds plugged back in rebooted and long short beeps immediately followed by long short beeps immediately followed by long short beepsimmediately followed by the HVLinePattern screen I rebooted a few times and shot a little video LINK ON YOUTUBE while I observed the same pattern of beeping Riveting stuff Click to expand As I expressed to Broni I m not terribly optimistic we ve already began the process of shopping for a replacement Now that I know the beeps have a significance I m a bit agitated that the tech shop ignored the HVLinePattern screen and the beeps they likely also heard Oh well At any rate if you have any insights I d be so very appreciative If not I truly understand that my fiance managed to do too much damage by not getting help quickly enough and or by clicking on an especially malicious piece of malware We just hope we can take steps to avoid it again in the future Thank you nbsp

A:Possible motherboard issue

Sorry! must've been half asleep when I posted this under MOBILE COMPUTING ... meant to put it in PROCESSORS AND MOTHERBOARDS and just did so. If there's a way I can delete my original post above, let me know so I can learn the RIGHT WAY to take advantage of this valuable resource.

Moderator note: Irwynn, I moved your post here to a more appropriate subject forum IMO.
 

http://www.techspot.com/community/topics/possible-motherboard-issue.199691/
Relevancy 17.2%

Hey how's it going. Any help would be great.
Had an older system so got a new motherboard and CPU. Installed it all and then no power when I try to switch it on. The orange modem light comes on but nothing else turns on.

New system-
Motherboard- z87-d3hp
CPU- i7-4770
Gpu- GeForce GTX 460
Ram- Kingston DDR 3
Psu- Shaw p4s6 860w.

Thank you

I also tried putting in one ram card at a time. Taking the graphic card out and using on board. Taking the motherboard out of the case to see if it was shorting out.
 

A:No power after motherboard install

Ratchetz said:





Hey how's it going. Any help would be great.
Had an older system so got a new motherboard and CPU. Installed it all and then no power when I try to switch it on. The orange modem light comes on but nothing else turns on.

New system-
Motherboard- z87-d3hp
CPU- i7-4770
Gpu- GeForce GTX 460
Ram- Kingston DDR 3
Psu- Shaw p4s6 860w.

Thank you

I also tried putting in one ram card at a time. Taking the graphic card out and using on board. Taking the motherboard out of the case to see if it was shorting out.Click to expand...

By any chance could you post a picture of your computer as it is hooked up right now so we can see if your missing anything. Try to check if the 4pin/8pin connector on the motherboard is hooked up and check for tightness of all the Motherboard connectors to start with.
 

http://www.techspot.com/community/topics/no-power-after-motherboard-install.199528/
Relevancy 18.92%

I have a 2TB My Book Live that I and my housemates use to store media. Initially I was the primary contributor to the drive, and at that time there were no issues. Eventually, someone else began adding files to the server. Since then, any folder that someone else has added files to cannot be accessed by me unless I am logged in as a guest. If I log in as an administrator the folders show up but are greyed out. This only happened with one user. I am running a Mac, and they were using Windows, but other Windows users have added files without causing this issue. I was wondering if anyone else has experienced this, and if anyone knows of a workaround other than always logging out as administrator when I want to access those folders.

Thanks for any help
 

A:WD My Book Live issue

This appears to be an issue on how the drive was formatted and hard disk permissions. Before I go through a bunch of steps to fix, since this is an older post, is this still an issue or have you resolved it?!

Post back please.
 

http://www.techspot.com/community/topics/wd-my-book-live-issue.196247/
Relevancy 18.92%

OK, so I have a stable network connection through my modem at all times and of which is currently hard wired to my desk top. Every hour or so I seem to lose connection to the internet through my pc but the modem still shows a stable signal (online light stays on) I run the trouble shooter for internet and get nothing most times so I end up having to re-boot the pc to get connection back. I'm not the most tech savy so any suggestions on how to get this fixed step by step instructions would be VERY helpful !
 

A:Internet connection issue

First I would try replacing the Ethernet cable being used to connect the modem & PC. Next, if there are other "LAN" ports in the modem, plug into a different port. After that I would try pinging the default gateway (ip address of the modem) with an infinite ping and watch to see if there are dropped packets. if there are multiple dropped packets, then it could be a bad network card in the PC or a bad port in the modem.

to infinite ping, open the command prompt and type the following:

ping <ip address of modem> -t (c:\ping 192.168.1.1 -t)

to make the ping stop press: Control C look at the results and see if you have dropped packets. Here's a look at mine after 10 pings

************************************************
C:\>ping 192.168.10.1 -t

Pinging 192.168.10.1 with 32 bytes of data:
Reply from 192.168.10.1: bytes=32 time<1ms TTL=64
Reply from 192.168.10.1: bytes=32 time<1ms TTL=64
Reply from 192.168.10.1: bytes=32 time<1ms TTL=64
Reply from 192.168.10.1: bytes=32 time<1ms TTL=64
Reply from 192.168.10.1: bytes=32 time<1ms TTL=64
Reply from 192.168.10.1: bytes=32 time<1ms TTL=64
Reply from 192.168.10.1: bytes=32 time<1ms TTL=64
Reply from 192.168.10.1: bytes=32 time<1ms TTL=64
Reply from 192.168.10.1: bytes=32 time<1ms TTL=64
Reply from 192.168.10.1: bytes=32 time<1ms TTL=64

Ping statistics for 192.168.10.1:
Packets: Sent = 10, Received = 10, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
Control-C
^C
C:\>
**********************************************************
Hope this helps, post back!!
 

http://www.techspot.com/community/topics/internet-connection-issue.199470/
Relevancy 18.92%

I am new to upgrading my PC, but I have some experienced friends and I have stumped them all with my issue. I installed a new MSI Twin Frozr III R7850 graphics card in my HP Pavillion Desktop, I have a PCIe x16 2.0 and the card uses 3.0, however from research that should not be my problem. I installed the card and two startups in a row I got 8 1 second beeps. On the third startup however I got nothing, it just started up, no picture and obviously not loading any programing, but no beeping. I have tried the HDMI and DVI ports that the graphics card uses and I still have nothing. My computer, however, runs perfectly fine when I do not have this new graphics card powered. Am I doing something wrong, or is my card just dead?
 

A:Graphics Card Issue

Well ill go through a few basic things:

First did you hook up both 6 pin connectors?

Second what video card was installed previously, if it was NVidia, did you remove the previous drivers.

Third, have you tried different slots on the motherboard for testing, also does the motherboard have onboard video.

Try these solutions and lets go from there.
 

http://www.techspot.com/community/topics/graphics-card-issue.198865/
Relevancy 18.92%

I'm having an issue with the keyboard for my Toshiba Satellite P775-S7320. Put plainly, keys have started triggering other keys, as if both keys were pressed at the same time. Nothing was spilled on the keyboard, but now, A and Tilde trigger one another, and the same for 1 and 2, Q and S, W and Tab, X and Capslock. The only exception to this is Z and \. Z will trigger \, but \ will not trigger Z. I've popped off the keys and cleaned them with compressed air, I've rebooted my computer several times, and am unsure of where to go from here.
 

A:Issue with Laptop Keyboard

Try hitting the NUM LK/SCRN LK key
 

http://www.techspot.com/community/topics/issue-with-laptop-keyboard.199043/
Relevancy 18.92%

Hello, I have a aspire 1430G desktop that has an AMD E-450 APU and I recently upgraded the PSU to support my also recently gained Gigabyte GT610. When I place the GT610 into its PCI slot and turn it on I get a black screen that says no input detected. When I remove the graphics card my computer runs like normal, and now im stuck with not a clue in the world of what to do to get the GT610 to work with my desktop. Any suggestions of what to do?
 

A:Graphics card issue with a APU

Are you connecting the monitor to the card? In order for the card to work the monitor must be connected to a port on the card.

If not the reason for the black screen is the integrated graphics is disabled when installing a dedicated graphics card.
 

http://www.techspot.com/community/topics/graphics-card-issue-with-a-apu.198893/
Relevancy 18.92%

I have a Dell Inspiron with Windows Home A few days ago while watching a video on ESPN com an error message popped up saying I had an issue with my video card and then my computer froze and restarted itself before I can write down what the error message said Now when I turn on my computer I get to the screen to type in my username and password and get to my desktop but before the computer is fully loaded it freezes Everything on my desktop comes up normally with all the icons and background I can start my computer in safe mode and tried a system restore to no avail Can anyone help with my issue or send me in the right direction I did notice that under safe mode when my screen saver is supposed to come on I get this message quot The screen save can t run because it requires a newer video card or one that s compatible with Direct D quot Don t know if that is related Thanks for the help Card Video Issue Possible nbsp

A:Possible Video Card Issue

This laptop has Intel HD Graphics. It is called on-board graphics permanently part of the motherboard and it is not a video card. The graphics driver might have become corrupted or the graphics chip might have overheated
 

http://www.techspot.com/community/topics/possible-video-card-issue.198605/
Relevancy 18.92%

I issue An logins with user have a former company PC Earlier I was attempting to remove the company An issue with user logins domain from it so that I didn t have to An issue with user logins log in as the previous user every time just to get to the desktop So I changed the computer name right click my computer properties computer name I then clicked on Network ID and set to this computer is for An issue with user logins home use and then it went wrong I restarted the computer as instructed and tried to log on as the user as before but it is telling me the password is incorrect The username is correct and so is the password It s clear that whatever I did with the Network ID has caused this I have logged on as administrator but need to access the other user due to the saved files on there etc Can someone help me revert back access that user account from admin Is there a way to completely detach the PC from the previous domain so that it is like a normal home PC with no log in Thank You nbsp

A:An issue with user logins

Administrator account has permission to access files from other users. Just go to the C:/Users section or whatever.
 

http://www.techspot.com/community/topics/an-issue-with-user-logins.198449/
Relevancy 18.49%

Alright this is really driving me kinda nuts I recently upgraded from a Pentium Dual Core ghz to AMD A - K ghz Quadcore Gigabyte F A M D H GB DDR RAM PowerColor HD GB temp issue A8-5600K monitoring TB HDDs Cooling A8-5600K temp monitoring issue info Aerocool Vs running stock heatsink intake mm fans x facing CPU side x bottom x front facing HDDs and exhaust mm fan at the back And everything s basically fine except the temperature monitoring for the processor A - k in the BIOS it s like C even if System Temperature was C is that even realistic and in Windows bit I can t tell which temp it is using HWInfo HWmonitor Gigabyte s easytune and coretemp In HWinfo it kinda claims the CPU is - degrees Then in Gigabyte s easy tune CPU is C so I traced it and if you look in the picture atleast according to Gigabyte it s Temperature - C but that s kinda unrealistic as it also stays at C even under full load Then finally in HWMonitor there s a Package under AMD A - K that says it s around - C but I m still not sure which one is it What is that quot package quot anyway In fact one time Hwmonitor said C was the max but maybe that was because I was runinng other temp monitors and it conflicted On the rest of the instances in this original post I made sure to run one at a time I ran a Blend Test in Prime and both the TMPIN which is the same value as the - C in Easytune and HWinfo and the A - K Package are changing and maxing at C and C respectively So all in all SpeedFan BIOS HWinfo and ET all display - C or something HWMonitor and Speccy display the - s Which should I trust or what should I use nbsp

A:A8-5600K temp monitoring issue

Trust the package temp, that's the one on those processors you should be watching for.
 

http://www.techspot.com/community/topics/a8-5600k-temp-monitoring-issue.197971/
Relevancy 18.92%

I recently upgraded the memory in my fathers Laptop from the original 256Mb sim to a 2Gb sim. No problem there however the Return key and the Cursor keys seem to have stopped working even in the Bios.

I have removed the battery and held the power button in for 30secs thinking a reset of the Bios would fix the problem, no luck there they still do not function.

I have removed the keys and checked that nothing has been spilled on the keyboard, no problem there ether.

I have also checked internally to see if there was any damage to the ribbon cable. Seems fine.

To be honest I cant seem to locate the issue and was hoping someone could offer some additional support. Anybody any ideas?

Specs: Esystem EI 3101 laptop, Intel Celeron M430 1.73ghz CPU, 2Gb DDR2, Internal 256mb GFX card.
 

A:Laptop keyboard issue

Did you try re-installing the 256MB memory to see if the keyboard started working again?
 

http://www.techspot.com/community/topics/laptop-keyboard-issue.195455/
Relevancy 18.49%

Hey, my name is Dazz. I am pretty new here and have just built a new PC, I have connected all the parts of the PC up correctly and seem to be having problems on startup. I hear the general kick into life startup but when I look at my monitor it is completely black, no startup screen. Doesnt even turn on, the light on the monitor is set to 'standby' straight away. I have no idea what the problem is at all.

Any ideas what it might be?

P.s.
I am using Sabertooth 990FX R2.0 motherboard, 750W ATX PSU, Corsair Dominator 4GB Phenom II x6, and a Prolite E2208HDS monitor
 

A:GeForce GTX 690 black screen issue

The real question I have is why you are pairing a GTX 690 with a Phenom X6 and 4GB of RAM!

Jokes aside, does the GPU fan spin when you startup the PC? Is it properly seated on the PCIe port? Is there a power connection to the GPU?
 

http://www.techspot.com/community/topics/geforce-gtx-690-black-screen-issue.196993/
Relevancy 16.77%

Hey Everyone,

I'm not sure whether this is the correct place to post this (I'm new here). Sorry if it's the wrong place!

So my problem is I am running a laptop on windows XP. Every time I start up the computer, it prompts me to install device drivers (HID-compliant devices and stuff). The weird part is, I've already installed those drivers when I first got the computer. I've learned to just press cancel every time those prompts pop up, but I'm wondering if I'm able to stop them from popping up every single time I start the computer. I'm also curious as to why it's doing this. Any help would be greatly appreciated!

Specs:
Operating System: Windows XP Service Pack 3
Processor: Intel core 2 duo
RAM: 2GB DDR3 RAM
Brand: Lenovo R500
Graphics: Intel R 4 series express chipset family (on-board)
 

A:Drivers always prompting to re-install (windows XP)

I'm far from an expert, but why not let them install to see if it quits prompting you? If all else fails, you can roll them back. After all, they could be "updated drivers". Just my thoughts.
 

http://www.techspot.com/community/topics/drivers-always-prompting-to-re-install-windows-xp.196822/
Relevancy 16.34%

In Windows 8, whenever we copy any exe files to USB device/pen drive, there is an Interrupted Action dialog saying that "the file has properties that can't be copied to the new location". How to fix this issue?
 

A:Windows 8 File Copy "Interrupted Action" Issue

I missed to say that there is an easier alternative method to copy files with properties is by creating image of the files need to be copied. For example, iso, daa , bin, etc.
Even if we use alternate methods, we need an easy solution to fix the main issue without any tools or software.
 

http://www.techspot.com/community/topics/windows-8-file-copy-interrupted-action-issue.196667/
Relevancy 18.92%

Hi guys.
I have problem in starting my Laptop,window could not start normall I got black screen infront
of me whenever I start it so I have to ctrl+Alt+del to start it then thats the time windows is up and
running.What seems to be the problem?Please help I no idea in this issue
 

A:Windows 8 start up issue

Hi Bonmar,

It may be possible that Secure sign-in requiring all users to press Ctrl+Alt+Del is enabled on your computer. This generally provides an additional layer of security to protect the system.

In order to disable this option, please try the following steps:

In the Start screen, type netplwiz in the Search box, and then press ENTER.
Administrator permission is required. If you are prompted for an administrator password or confirmation, type the password or provide confirmation.
Click the Advanced tab, un-check the "Require users to press Ctrl+Alt+Delete" check box, and then click Apply/Ok.
Hopefully, this may resolve the issue for you. Please reply if you have further queries.

Thanks and regards,
Babita G
#iworkforDell

For easy access to drivers, manuals and product updates, please visit our Support Site .
 

http://www.techspot.com/community/topics/windows-8-start-up-issue.195528/
Relevancy 18.92%

Issue I currently have hard drives installed on my desktop I m Hard Issue(s) Drive using them as separate Hard Drive Issue(s) drives One is a gig which has windows vista came with the computer for every day use and the other is terabyte with windows which is for music recording purposes only Whenever I boot my computer it gets to a blue HP screen that has several F key options F F F and then there is an ESC option for boot menu to select between the hard drives The gig always boots up regardless of which one I choose All the cables are hooked up properly I don t understand Could somebody please help Oops I forgot issue My gig hd freezes up It was doing this before I got the terabyte hd which is why I bought it in the first place Everything loads up and works fine for about a minute or and then everything freezes Even after letting it set for awhile nothing works Not even Ctrl Alt Delete works Nothing I did a factory restore on it after I got all the files moved from the to the tera Any ideas on this one as well nbsp

A:Hard Drive Issue(s)

What are the make/models of the Hard drives? Have you tried going into your bios and set the 2 Terabyte hard drive as primary? In my opinion, I would eliminate Windows Vista (no point in running Dual Boot Windows Vista AND Windows 7). If you've already saved what you want from the 750 GB hard drive, then I would just format it and use it as extra storage until it no longer works, or just eliminate it totally from the system. You can setup profiles if you are worried about keeping information separate or you can give another operating system (Linux) a try.
 

http://www.techspot.com/community/topics/hard-drive-issue-s.195088/
Relevancy 18.49%

Long of it Hey I was playing Minecraft this Friday night when suddenly the screen stopped working correctly The moniter diplays everything fuzzy similer to the background here However at the top of my screen maybe about a centimeter everything is fine I can see the title bar of open folders and even managed to move my task bar up to the top of the screen and can see it about half way I can start the computer and access folders programs threw guessing where the icons are or using the keyboard to select the icons Works best when I have hot keys to work with to remove the clicking guesswork I m not sure what is going on with my laptop I purchased it almost a year ago on June th So I m probably out of luck on the manufacturer s warranty but I did purchase the year warranty from Wallmart so I m trying there But as my collage classes start on the th sooner I can get my laptop working the better Short of it The graphics on my Dell Laptop ain t working properly I can see a centimeter at the top properly but that is it The computer itself still works on issue Laptop Dell Sudden graphics I can open access everything I just don t have a visual on the GUI to make clicking things easy Is there anything I can do to alleviate this problem while waiting to hear back about my warranty Sudden graphics issue on Dell Laptop Or am I just out of luck My laptop is an Inspiron N Intel Core i - M Processor GB Memory Integrated Intel HD Graphics Windows Home Premiun -bit Microsoft Office Starter Dell Stage software nbsp

A:Sudden graphics issue on Dell Laptop

It's the sort of screen corruption seen when the integrated graphics are shot. The laptop probably needs a new motherboard. Playing high intensity video games for long periods on laptops isn't a good idea unless they have been designed to do the job. That warranty should come in handy.
 

http://www.techspot.com/community/topics/sudden-graphics-issue-on-dell-laptop.195152/
Relevancy 18.92%

Hi there guys, hope you are all having a wonderful day. I need a little advice on my computer as I am a very passionate gamer. I have a custom made PC which I spent quite a bit of money on and now I come to play games such as Counter-Strike:Global-offensive or DotA/HoN and I get crazy FPS issue. I honestly cannot understand why. Anyways I hope someone can shed some light on this situation or maybe take me towards the right directions

AMDPhenom(tm) II X6 1055T Processor (6CPUs) 2.8GHz
8192MB RAM
AMD Radeon HD 6900 Series (2.1GB RAM)
10MB Internet - Which runs really fast seeing as I am right next to the exchange

Not sure what other details you need. If you can help me or need more information to do so please let me know! thanks

Sorry I forgot to add that I get around 30-80 FPS on CS:GO
 

A:Searching for some advice - FPS issue

Are you running Windows 7 64 bit?
 

http://www.techspot.com/community/topics/searching-for-some-advice-fps-issue.194945/
Relevancy 16.77%

Hi I have an all in one hp touch smart 520 pc and I have had it for about 2 years now and it doesn't do well with games and I was wondering if I can install a new better graphics card? if so can you recommend me one ?

thanks
 

A:Can I install a new graphics card on an All in one HP Touchsmart 520 PC?

I did some research and I found this
[
Expansion Slots:
1 PCI Express x16 module socket for MXM graphics card
2 PCI Express x1 mini card sockets
and
One PCI Express x16 Module (MXM) socket
MXM version: Type B
Power source = 19V
UMA or MXM Graphic card not exceeding 35W TDP
That is direct from HP. I asked today, because of your answers, HP support and I got the answer, that a Type II video card shut work as a upgrade on the inglewood motherboard. And don't worry. Bestbuy in Canada will upgrade the card in the store. But thank you anyway!

]
[
Yes, the MOTHERBOARD has those slots, no it is not upgradable after purchase, but good luck with that ]

apperantly the hp touchsmart 520 was never meant for gaming of high caliber and it cannot be upgraded :S


http://h30434.www3.hp.com/t5/TouchS...s-card-in-hp-touchsmart-520-1010/td-p/1128935

credits to that site.
 

http://www.techspot.com/community/topics/can-i-install-a-new-graphics-card-on-an-all-in-one-hp-touchsmart-520-pc.194772/
Relevancy 16.77%

Hey folks

where can I install a sd card reader on this unit there was a build in on the tower but I dont know where to plug it in the?



I have it pluged into 1 of the usb 2.0 ports on the bottom right now and the usb on the unit works but nothing when it comes to reading cards.
 

A:F2a85xm-d3h install of peripherals problem

What is the model of SD card reader?
 

http://www.techspot.com/community/topics/f2a85xm-d3h-install-of-peripherals-problem.194545/
Relevancy 18.49%

Hi, I have been trying to solve my problem for two days. I spent some hours on the phone with my internet provider (Bell) to solve the problem and they finally told me that the problem would be my computer or my config.

The problem is that I can connect to internet with my cellphone and my tab but I cant connect with my computer. It says limited connectivity on my windows8. I tried disabling my firewall and most of the turotials posted on the net but still nothing works.

I would love to be able to solve this problem .ty

Ps: sorry if I am difficult to understand I usually speak french =)

I already tried to reinstall my network drivers (Broadcom) and it still doesnt work. My computer is a Dell AMD phenom X6 operating with windows 8 (64)

...I also tried the ip release and renew
 

A:Limited connectivity issue at home

Hey Math.Is your router secured?. If so,I would verify that you can connect using an Ethernet cable. If so, I would go into the router's setup and change the broadcast channel the router is using, change it to 10 or 11 and save the changes. Remove the cable, wait a minute, then try to connect.What is the make and model of your router?.
 

http://www.techspot.com/community/topics/limited-connectivity-issue-at-home.194246/
Relevancy 18.92%

Problem began a few weeks ago with the lap turn not shutting down...would only go to hibernate... now I can't run any virus software or malware software both of which are installed on hard drive, it gives me a message that foxfire is running and I need to close it but it won't allow me to close anything...even loaded malware on external hd and tried to run it from there but the computer won't open it up...
 

A:Lenovo laptop issue

What OS (Operating System) are you using? To shutdown firefox, right click the taskbar & on the menu that pops up left click Start Task Manager & go to the Processes Tab,find firefox,highlight it & click End process. You might get a pop up asking you to confirm it,click yes & X out of Task Manager.
You need to install Malwarebytes on the harddrive. Once its installed, update it & run a (full) scan.
 

http://www.techspot.com/community/topics/lenovo-laptop-issue.194154/
Relevancy 16.34%

I got this laptop in for repairs recently and it has been a very tricky one I already told the client that I don t think it can be fixed but my curiosity has driven me to keep working on it This system came in unable to startup freezes during startup or said no boot device present I pulled the HDD out and scanned it from another computer Sure enough every error check would freeze around Note that I said freeze not display an error I would have to end task to close the windows drive check Chkdsk r from command prompt resulted in the same freezing partway through Disk copy and clone software would also freeze partway So during failure - drive after Toshiba Shuts OS install A305-S6898 off Satellite I copied the users files off manually and went to load a new Toshiba Satellite A305-S6898 - Shuts off during OS install after drive failure HDD in the laptop Every Toshiba Satellite A305-S6898 - Shuts off during OS install after drive failure time the OS install disk would load there would be Toshiba Satellite A305-S6898 - Shuts off during OS install after drive failure problems Sometimes it would freeze during the quot loading windows quot screen of the windows install Sometimes it would get to the install process and freeze right after selecting the disk to use Lately the most common problem is at variable points in the initial install loading process the system will just power cycle and restart At this point I ran memtest and found no errors Just the same I switched out the RAM and still it had problems I tried multiple different OS install disks and set bios back to defaults The problem persisted never being able to install a new OS I tried different hard drives external dvd drive and installing from a USB stick Oddly enough half of my repair utilities simply won t load things like seagate disk utilities paragon and acronis disk directors either freezing or giving weird errors like quot cd drive not present quot or quot memory not found quot The only thing that will run without freezing or restarting seems to be memtest which makes me think it s not an overheating issue since this can run for hours Frankly I m stumped It seems odd that the hard drive failed at the same time as whatever component is causing this problem so I assume either coincidence or some sort of drive controller failure that caused damage to the drive as well as making the system freeze while loading most any volume Any thoughts nbsp

A:Toshiba Satellite A305-S6898 - Shuts off during OS install after drive failure

Yeah, it may be a motherboard issue... Have you tried removing or resetting the CMOS battery?
 

http://www.techspot.com/community/topics/toshiba-satellite-a305-s6898-shuts-off-during-os-install-after-drive-failure.193323/
Relevancy 21.93%

I have operated a small one man IT company for the last several years Most of my clients are small businesses Lawyers Chiropracters non-profits Right now I have several client offices that are upgrading up from Pentium systems and a few others that want to add basic desktop systems to their offices to act as counterparts to their mobile computers that they use primarily These offices generally are interested in low cost systems that can adequately and relatively speedily handle their basic operations web browsing word processing email database and CRM access etc Anyways I have generally not kept a large number of systems in stock before usually reselling systems that clients trade-in to other clients or just helping an office choose a good system off of newegg or geeks Since I have had so many requests for systems lately though I have decided to start actively buying systems office to Processor resell suggestions systems budget for I have over a decade of experience refurbishing systems so I decided to shop around for used systems to fix up but I have been having a hard time deciding Processor suggestions for budget office systems to resell on a processor line generation brand to focus on I m considering the Intel Core Duo or a Turion or Athlon dual core Pentium D dual cores are very cheap but I know they are much slower than the core duos From their benchmark scores though it seems like a GHZ pentium d might be better than a Ghz core duo Any tips or suggestions would be appreciated in this regard My goal is to keep these systems under to sell and I don t need anything cutting edge nbsp

A:Processor suggestions for budget office systems to resell

I think a Pentium G2020 will bring you the best performance for $65. The AMD A4-5300 is another great choice for $55. I think the Pentium is probably the better choice because of the larger cache, but for web browsing, word processing, and basic activities, the AMD will be fine.
 

http://www.techspot.com/community/topics/processor-suggestions-for-budget-office-systems-to-resell.192622/
Relevancy 22.36%

Hello At the office where I work one view to office network DVR Using card there are two different phone lines each of which has a DSL contract On Using one network card to view office DVR one of the lines there is a dsl modem router which has a dvr connected for the security cameras I use the other router to Using one network card to view office DVR connect to the internet and for the local network sharing files with colleagues When I view the security cameras over the internet Using one network card to view office DVR using the router I connect to the image is really delayed I want to connect to the DVR v a local network with one network card so that the image is not delayed and use the other network card for the file sharing and accessing the internet How can I do this without creating a conflict I e having my computer try to connect to the internet using the network card for the dvr In summary I want to use one network card exclusively to view the security cameras and another network card for the internet and file sharing I m using Windows Home Premium Any help would be appreciated nbsp

A:Using one network card to view office DVR

You should be fine as long as the Internet NIC is plugged in first. Your routing table will confirm you have done it correctly.

jobeard can expand.
 

http://www.techspot.com/community/topics/using-one-network-card-to-view-office-dvr.193241/
Relevancy 17.2%

Hi I don't know if this is the right place to post this, but I couldn't find another place to right about my issue, I have the same laptop, and I have the weirdest problem!

My screen turns on but I can't install any OS, I have tried Ubuntu, windows 8, windows xp.... for example for windows 8 it shows a logo and then a blank screen, for Ubuntu I can't even boot from CD!

I have tried CD, usb drive
I have ran PC-CHECK, and it says no problem!
I have taken out the hd, and dvd drive to just boot from CD, and still nothing!

I have also updated the bios to the latest version from acer's website, this is so frustrating please help me
your help is appreciated in advance
 

A:Can't install any operating system

What is the make and model of your laptop? Have you changed anything in your Bios other then updating to the latest version? Did you update to the latest version of the bios before or after you started having problems?
 

http://www.techspot.com/community/topics/cant-install-any-operating-system.193122/
Relevancy 18.49%

Hi all just need a little help from you smarter people.

I have lots of devices on my wireless all work fine until this Hp notebook starts it seems to kick everything else off the network. So now called the death machine by all the family. Is this just a setting on the notebook that causes this? It happens on all networks that it joins to and stops as soon as the computer goes back into sleep.

Any help would be most appreciated

Thanks Oli
 

A:Notebook network issue (death machine)

Likely you have an IP address conflict - - two machines with the same address.
This will cause problems with everything attached to that same router (wifi or wired).

Make sure ALL devices do not use manual settings but rather use automatic DHCP for both IP and DNS
 

http://www.techspot.com/community/topics/notebook-network-issue-death-machine.193051/
Relevancy 18.92%

The reason that I put this here is because of the crashes I get when running any dx10 game like call of duty, saints row the third, etc.. Every time it crashes I will get a different colored screen but it is all the same color. I seem to just get orange,red,and black mostly. And on some occasions my sound repeats itself over and over. My computer is not overheating for it runs 60c while playing games and it is getting ample power and air so I have no idea as to what is wrong and I cannot find a fix anywhere.
 

A:Dx10 issue

What are your full system specs?
 

http://www.techspot.com/community/topics/dx10-issue.193078/
Relevancy 18.92%

Hi, I recently installed Norton 360 onto my OSwin7 Toshiba laptop andsubsequently now the computer wont start. it comes up with startup repair then says startup repair failed... is there any way to fix this issue? or get my files off the hdd onto another laptop??
 

A:Any help for a startup issue?

Firstly, I would never recommend Norton to anyone, its not as good as it appears - their marketing is just very good! Try starting it up in safe mode (push F8 non-stop from the moment you boot the PC and then select safe mode with the keyboard). If it starts up and you log in, open system restore (start > accessories > system tools > system restore) and restore the computer to a time before you isntalled Norton. It should help get it back up and running. If it doesn't work, I'll give you an alternative
 

http://www.techspot.com/community/topics/any-help-for-a-startup-issue.192907/
Relevancy 16.34%

Hi guys I m a bit desperate right now Here s the thing I have an acer g English bought in the Netherlands out of warranty original HD GB western digital included with windows home premium The hard disk is dying Everytime I restart windows demands a launch repair that takes HOURS otherwise it won t boot and will restart I bought a brand new Momentus XT GB It was fairly simple to remove the original disk and replace it physically Problems start with trying to install an OS on the acer -First off I went to the bios and set it to boot up first with the optical drive so I can use the recovery DVDs that I created on day one when I purchased the laptop It just doesn t doesn t do anything when I put the first one and restart Only the prompt blinking and the disk even stops spinning -I made New hard on drive 7 5740 can't windows acer aspire install sure the DVD drive reads discs I put back my old hdd waited till I can use windows again hours after launch repair and tried to read many DVDs and they all seem fine -Back to New hard drive on acer aspire 5740 can't install windows 7 the new drive installed No recovery I researched a bit and found out that erecovery only works New hard drive on acer aspire 5740 can't install windows 7 on acers with the quot hidden partition quot on the disk that came from factory Gotta find New hard drive on acer aspire 5740 can't install windows 7 another plan -I downloaded a copy of windows GB and burned the iso file on a blank DVD with hopes of installing it and then activating it with my key - Inserted Windows DVD created with the microsoft tool Same problem no reading I check again if my optical drive can read at all checked it reads DVDs - At this point I m not sure what else to do What I want All important files I had in my old hard disk are backed up somewhere else I just need to get rid of the dying disk and replace it with my brand new hd and install windows on it and then activating it I just can t seem to do this any thoughts would be appreciated Thanks nbsp

A:New hard drive on acer aspire 5740 can't install windows 7

Try formatting the new drive using something like this:
http://www.ultimatebootcd.com/download.html
then try and install Windows 7
 

http://www.techspot.com/community/topics/new-hard-drive-on-acer-aspire-5740-cant-install-windows-7.192341/
Relevancy 19.35%

This is probably the third or fourth time I'm attempting this... I have a HP m390n desktop that absolutely refuses to connect to the LAN. Before, we would have it connected wirelessly to the internet by a card, but it recently took a dump. I've tried to get the LAN to work several times in the past, and even posted threads on other tech forums. They had me do many things, but in the end they were all stumped.

To put it simply, the internet won't connect. It shows that it sends (slowly) packets of info, but never receives. It won't load any pages . The Ethernet card is enabled, I have tried updating/uninstalling the drivers. The wire itself works, tested by my laptop and another PC. We have 2 other desktops that are connected wired to the modem, they never have issues just this one desktop.

Any ideas?
 

A:PC LAN Issue

Do you still have the wireless adapter connected? If so you may need to disable it. In order for the ethernet adapter to work.
 

http://www.techspot.com/community/topics/pc-lan-issue.192338/
Relevancy 18.92%

I have been having issues with nfs for the longest time ok here s whats going on on different os s same specs let me break it down Windows XP q ti drivers nfs hot pursuit GPU usage x max settings - all the time Windows q ti drivers nfs hot pursuit GPU usage - x or x max settings - fps all the time Windows q ti drivers nfs hot pursuit GPU usage - x max settings - fps all the time Is this a CPU problem I swear nfs is the only game I own and tested and play that struggles on windows but works flawless on windows XP at x max On win you see the frames did increase when I play at and it works great but recording sucks Pretty sure once I upgrade my q to something better I wont have this issue but why does it run so good in XP also the gpu usage stuggles to get up to or but did slightly increase at in win just weird nbsp

A:NFS Hot Pursuit 2010 issue

http://www.needforspeed.com/news/need-speed-hot-pursuit-minimum-pc-specs. That is very odd because NFS: HP 2010 doesnt use DX11, and thus, should prove to perform equally well on Win 7. Try clean installing the 314.22 driver (custom install-->check the clean install checkbox)-->then install).
 

http://www.techspot.com/community/topics/nfs-hot-pursuit-2010-issue.192321/
Relevancy 18.92%

I have a HP laserjet 4014dn. Only when I print large reports, I get a little bit of black residue on the edge of the paper. I just replaced the maintenance kit, but it only helped alittle. Any suggestions on how I can get rid of it?
 

A:Printer issue

Not sure if this will help, but maybe cleaning the drum may help? http://www.ehow.com/how_4811815_clean-printer-drum.html
 

http://www.techspot.com/community/topics/printer-issue.192043/
Relevancy 18.49%

I am having a strange issue with a Sony netbook (VPCM12M1E) in that the keyboard seems to have a mind of its own, it used to be an intermittent issue but is more prevalent now. The issue is that if I try to type it enters the letters in capitals, if I press CapsLock it goes back to lower case letters. If I use the numbers, ie. 1234567890 they come out as !"£$%^&*(), whatever I do with CapsLock or NumLock. If I try \,./ I get |<>? However if I boot into safe mode it all seems to work fine.
So far I have restored back to factory, reloaded the drivers for the keyboard and pulled my hair out and there isn't too much left now. Have any of you guys any words of wisdom for me
 

A:Sony Vaio keyboard issue

The replacement keyboards are not expensive. Try a new keyboard. Other than this, the motherboard may be the cause
 

http://www.techspot.com/community/topics/sony-vaio-keyboard-issue.190786/
Relevancy 18.92%

Anyway that I can make the Thermal Element G case compatible with the ASUS P8Z77-V LK LGA 1155? I know the case doesn't have a USB 3.0 front port but the motherboard does. What can I do to get around this, because this is the only case that I can find that I really like.
 

A:MB and case compatibility issue

Ah, good to see you have received your components . I dont really get what you mean. The case doesnt have front USB3 ports? This may be because the case is an old model.
 

http://www.techspot.com/community/topics/mb-and-case-compatibility-issue.191480/
Relevancy 18.92%

I got this older computer I built just recently and when I power on the computer it turns on then off then right back on and I gotta say that this is the first time I seen this happen before. It has an ASUS mobo and there are no issues as far as I can tell and I think I tried the PSU in another computer and it was fine so I am not sure what would cause this? Any ideas why this would be happening? Thanks.
 

A:Computer power issue

Few things I can think of 1 take cmos battery out and replace it 2 check bios settings (default settings ) then depending how many sticks of ram u got take them out and put 1 at a time and see if problem still happens
 

http://www.techspot.com/community/topics/computer-power-issue.189876/
Relevancy 18.06%

Hey dudes got a small tech problem and hoping you guys know what the problem is ever since I built my computer last year I ve noticed a lot of my games stutter when my character is moving I ve noticed this in Sleeping Dogs and Path of Exile most notably but other games like The Witcher and Chivalry Medieval Warfare as well the screen seems to stutter for a millisecond every or so seconds or sometimes issue games, Stuttering in monitor possibly problem every second occasionally it ll just stop completely as in it won t stutter at all my FPS is staying a constant though no dips in FPS at all it s Stuttering issue in games, possibly monitor problem like the game jumps or something anyone have a clue what it is it s a minor visual complaint but it s pretty irritating also my specs GB RAM GB i k factory settings EDIT okay so I ve noticed this issue does not happen in windowed mode I m trying to go fullscreen on my nd monitor to see if it s monitor related but having a little Stuttering issue in games, possibly monitor problem trouble EDIT tried recording in Fraps to show people seems to completely or almost fix the stuttering while recording so I m guessing it s not my monitor here s the video showing off a little bit of it the beginning is where it s mostly at and the big stutter at is just an FPS drop but the rest is the stuttering issue I m getting nbsp

A:Stuttering issue in games, possibly monitor problem

What is the make and model of the power supply?
 

http://www.techspot.com/community/topics/stuttering-issue-in-games-possibly-monitor-problem.188648/
Relevancy 18.06%

I am trying to figure out what s wrong with an older machine -- distortion on issue? Flash Audio older machine I put together for my dad It has a ghz Athlon XP processor GB RAM Audio distortion on older machine -- Flash issue? and a sound blaster Live -bit PCI sound card Very unimpressive machine by today s standards but he basically only needs it for web surfing and audio He likes to use YouTube as a source to learn new music etc The problem I am having is whenever audio is streamed in the browser which as of right now is Chrome the flash playback is very distorted or garbled I noticed that CPU usage is very high and I ve disabled hardware acceleration which didn t seem to help When audio files are played from the system however be it mp or wav the audio is completely fine so I m not sure what the problem is The computer is definitely somewhat of a relic but it should be able to stream audio video just fine I would think I am going to try a different newer power supply and maybe try to find more RAM for it but right now I can t figure out why the flash audio is messed up nbsp

http://www.techspot.com/community/topics/audio-distortion-on-older-machine-flash-issue.188162/
Relevancy 18.92%

The build consists of a core quad running at ish is it a Q or something like that I think has GB DDr GT and some intel branded motherboard Until the motherboard issue? Likely a new build im getting this from a bro what happened was it stopped detecting half the ram and started running mindboggingly slow Nothing as slow as hard drive issues would Likely a motherboard issue? cause I mean it would take minutes to open a web browser and games he used to be able to play fine like GTA IV would barely run then crash later Likely a motherboard issue? on saying your pc isnt good enough to run this game or something like that So its nothing a hard drive would or should do The mothervboard seems a likely choice for RAM problems but would it cause the speeds his CPU was running very hot at some points before this happened ish idk but it still worked fine So thats my question is it a definite motherboard problem or is it a possible CPU problem or something I would be buying a new drive since he took the old one out and a new motherboard if that was the problem and maybe a better heatsink If the CPU is the problem ill probably just part the whole thing out and use the money towards a new build nbsp

A:Likely a motherboard issue?

What version of windows and is it 32 v 64bit?

64bit systems with only 2gb active ram would be a poor performer. however, don't judge the system using the Internet - - there are many more reasons for poor network performance.

Process of elimination to test memory:
Keep stick in slot 1 and remove stick in slot 2; reboot - if it runs, stick 1 is good, else

Pull stick 1, insert stick 2 into slot 1 and reboot - - if it runs stick 2 is good, else trash and replace w/new

If #2 is good & #1 is bad, replace
 

http://www.techspot.com/community/topics/likely-a-motherboard-issue.187324/
Relevancy 16.34%

I recently purchased a GTX and after installing it and rebooting my computer once windows fired up I noticed my speakers were making a high pitched noise along with fluctuating static Upon further investigation I realized my audio was also not working Here are some things I have tried to remedy the situation - Checked the speakers They work perfectly on another computer likewise I still get install new audio buzzing, no video after card Speakers the noise when I tried a different set of speakers and a set of earbuds in the problem computer - Tried changing the video card out with the old GTX didn t work - I have tried uninstalling reinstalling both audio and video drivers using these instructions http www Speakers buzzing, no audio after new video card install evga com forums tm aspx m amp mpage with drive sweeper again to no success - Speakers buzzing, no audio after new video card install I have swapped out PSU s and still get the problem - I have tried doing a fresh windows install with a spare HDD and I still get the noise as soon as windows boots I have figured out that if I go in to Device Manager under System Devices and disable one of Speakers buzzing, no audio after new video card install the High Definition Audio Controller there are two but the other is associated with my video card then the noise will stop At this point I am pretty perplexed as to what is causing this Could something on my board have been zapped I m out of ideas for a fix any help ideas would be greatly appreciated ASUS x Sabertooth mobo Intel i - Bloomfield GHz Quad Core EVGA GTX GB Corsair Vengeance DDR RAM Kingston SV GB SSD WD Black TB RPM HDD Corsair HX Watt PSU nbsp

http://www.techspot.com/community/topics/speakers-buzzing-no-audio-after-new-video-card-install.187870/
Relevancy 18.49%

Hello Community My name is Andrew Fratello and I work for a computer repair shop in Florida I m new in the field at a professional level but I ve been tinkering with computers since I was a little kid I m new to this site as well and I hope it to bring me some good help with some of my future work if I cant trouble shoot it myself The HP Pavilion Dv - dx Laptop came into the shop today The problem with the PC is that it doesn t have any display HP laptop Dv6-3025dx issue Pavilion display at all You can turn it on and it will stay on just fine but even when I plug in a VGA cord connected to one of our shop HP Pavilion Dv6-3025dx laptop display issue monitors the screen still isn t displaying If it was a LCD screen issue I m sure I would have been getting video feed from the external monitor which leads me to believe that the motherboard is malfunctioning I want to double check here with you guys and get a couple opinions before I let the guy know what the problem is and what needs replacing The last thing I want to do is have the gentleman buy a new part that is worth a couple hundred and then it turning out to not have been the problem at all Please get back to me ASAP Thanks and looking forward to your responses nbsp

A:HP Pavilion Dv6-3025dx laptop display issue

My guess would be the video chip. If you are not getting it on either screen.
 

http://www.techspot.com/community/topics/hp-pavilion-dv6-3025dx-laptop-display-issue.187734/
Relevancy 18.92%

I am trying to use FoxFi with my ASUS TF101(jelly bean) and my HTC Desire C. I cant seem to get the Tablet to see the phone in the network settings. Can anyone help me please or recommend another free tethering app that will allow me to pair my devices wifi?
 

A:Tethering Issue

The web site doesn't offer much info, but found the following on the Market. See if they help if you haven't tried already. My Samsung Fascinate (GB 2.3.5) is rooted and I have Barnacle installed. I've connected my Transformer Infinity and Dell laptop to it w/o issues.





Here are some tips to help your usage:
1. On some models if you run into WiFi problem after using the Hotspot, simply reboot your phone and rename the hotspot before activating to clear the issue.
2. For some Samsung phones if your computer is not able to get an IP address, try to turn on WiFi on the phone first and make sure it does not connect to any WiFi network, then turn on FoxFi.
3. FoxFi is tested on non-rooted phones. If your phone has a rooted ROM it may or may not work.
4. When WiFi hotspot is activated you may also see a hotspot notification of the built-in WiFi hotspot feature. Please ignore it. As long as you do not sign up for a tether plan you won't be charged.
5. If you enter or change the hotspot password, make sure you rename the hotspot also before activating.
6. Sometimes Windows need a "repair" on the WiFi menu to get a correct IP address.Click to expand...


 

http://www.techspot.com/community/topics/tethering-issue.187271/
Relevancy 18.92%

Specs Tp-link TD- modem bridge mode gt Linksys wrt g v router running DD-WRT v -sp firmware PPPoE pretty much everything is default settings except for the wlan setup gt to Win laptop wired and wireless Win desktop issue? Router? Set-up Network? wired and a tv box for streaming wired Internet amp Speed DSL mbps kbps Been experiencing some dropped connection for the past week and was wondering if it was the router the modem the chords Router? Network? Set-up issue? the power adapter source or my computer In the past even with the tv box tvpad streaming the internet connections would never drop and speeds were still consistently strong-ish able to game surf download-non P P etc that was until the two weeks now I d lose connection extremely momentarily but reconnect even without the streaming MSN would log off but reconnect pages would stop loading etc I ve done numerous disconnects resets and power cycles swapped cords and nothing has worked Speeds would also be extremely erratic sometimes normal but mostly slow laggy Speedtest net results were irregular on good days - mbps kbps but then have horrid momentary dips sub mpbs kbps ping was consistent though usually around - ms range Thinking it was perhaps the modem or the ISP I spent over an hour on the phone with the ISP tech We did several line tests and speedtests with both the laptop and desktops directly connected to the modem that showed strong signal and great speeds - ms ping just over mbps and under kbps consistently Surfing the net and what not was smooth My ISP provider does not provide support for my router which is understandable since it s not something that they sell but the tech was more than helpful perhaps even overstepping what he s allowed to help customers with After I hung up I factory resetted the router and reconnected it to the modem but it became same old irregular download speeds with dips and lags both the laptop and desktop I was able to surf and what not for a bit but I would still get a dropped connection every so often The other nite monitoring the router on and it seems like every so often the wan ip would change does not seem like it s holding onto the ip and the router seems to be picking up a new ip every once in a while On the other hand when plugged in the tvbox and tried streaming with it it ran ever so smoothly no buffering consistent data transfer and blinking lights I d still be able to surf slowly not at crippling speeds but this was never a problem in the past Does this seem to be a router problem wear and tear Did the tvpad tvbox cripple the router it seems like the router has been trained to give the tvpad tvbox nice connections nbsp

A:Router? Network? Set-up issue?

wakwak1214 said:





Specs: Tp-link TD-8816 modem (bridge mode) > Linksys wrt54g v3 router(running DD-WRT v24-sp2 firmware; PPPoE; pretty much everything is default settings except for the wlan setup) > to Win 7laptop (wired and wireless) , Win 7 desktop (wired), and a tv box for streaming (wired). Internet & Speed: DSL 6mbps/800kbps

The other nite, monitoring the router on 192.168.1.1 and it seems like every so often the wan ip would change; does not seem like it's holding onto the ip and the router seems to be picking up a new ip every once in a while. On the other hand, when plugged in the tvbox and tried streaming with it, it ran ever so smoothly; no buffering, consistent data transfer and blinking lights.Click to expand...

WAN ip changes will mess with streaming and disconnects for sure. Look in your router, WAN side (or Connection Status), and take note of the LEASE Obtain/Expires. Then attempt to look into the MODEM for Obtain/Expires.

My NetGear has Obtained 12:55;56, Sunday (of last week) and Expires 23:12:59 Sunday (of this week)
 

http://www.techspot.com/community/topics/router-network-set-up-issue.187248/
Relevancy 18.92%

Specs:
Motherboard: Sabertooth Z77
CPU: Intel i7 2700k
GPU: Nvidia GeForce GTX 670
PCU: Corsair TX750

Hi there, this is my first post. I am having an issue with the sound not working. The HD audio is connected properly and I am not using an HDMI cable. I'm not entirely sure if the Motherboard Sound Card works (in which case I would buy a separate sound card), but everything is connected. Would the problem be that I'm using a DVI cable in the GPU rather than an HDMI cable in the Motherboard?
 

A:GTX 670 sound issue

DVI and VGA have nothing to do with audio.
Could you maybe be a tad more specific about your problem?
when did it start occurring?
are you using speakers/headphones? what kind?
also when you say "DVI cable in the GPU rather than an HDMI cable in the Motherboard?" that's a bit confusing. please don't tell me you have a DVI and HDMI cable plugged in at the same time
anyway, some more information would be welcome
 

http://www.techspot.com/community/topics/gtx-670-sound-issue.185300/
Relevancy 18.92%

So my wireless keeps disappearing from my list of networks on my PC. The weird thing is it is only my router that disappears from the list and not my neighbors' routers. The reason it weirds me out so, is the router is working fine, as I am typing this on my laptop connected to the network, also WII, and Ipad are still connected just fine. The only fix I've found is to restart the computer, but it only works sometimes, and when it does it is only temporary. Device Manager says Drivers are up to date. It has a gigabyte gn-wp01gs WLAN card.Not sure what would cause this, it has all worked fine for about 3 years, and just started doing this yesterday.
 

A:Weird wireless issue

Is your ISP a DSL or Cable connection?
get a copy of inSSIDer and it will show all wifi stations in range and the channel they are using - -
set yours to an unused or least used number.

inSSIDer also shows signal strength and supports both 2.4 & 5.0 GHZ bands
 

http://www.techspot.com/community/topics/weird-wireless-issue.186837/