Windows Support Forum

SCCM driver packages needed for Tecra R850 / R950 series

Q: SCCM driver packages needed for Tecra R850 / R950 series

Hi all,

we need a drivers package for SCCM, we have different models and series, for example:
TECRA R850-151, TECRA R850-1J5, TECRA R950-11H, etc.

Where do we downloads this package from?


Relevancy 100%
Preferred Solution: SCCM driver packages needed for Tecra R850 / R950 series

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link (This link will automatically start a download of Reimage that you can save to your computer.)

A: SCCM driver packages needed for Tecra R850 / R950 series


For own European notebook series, Toshiba provides the drivers for download on their Toshiba EU driver page:

If you need an SCCM driver packge, I would recommend you to check this Toshiba page:

This package provides the device drivers and tools for your Toshiba business notebook, in order to allow you to deploy Windows images with Microsoft System Center Configuration Manager (SCCM) by importing this package.

To obtain service, please contact *[email protected]*
Relevancy 85.25%

I've got several Notebooks Tecra R850 and Tecra R950. Many users are complaining that they have Problems with UMTS and Toshiba Wireless Manager. Much time the Driver is hanging up and is only working right after a reboot.
I tested a external UMTS USB-Card, it worked without any Problems.
So it's very strange, that there are so much Notebook affected with this Problem. Is there any bug or Problem know?
How can I save the Problem? It's not comfortable!
Thank you and
best regards
Isabel Metz
Relevancy 94.6%

I'am stuck with installing the WLAN Driver for the above mentioned Notebook on our preconfigured Windows bit image It seems to be a combined WLAN and Bluetooth Card Atheros AR WB-EG Wireless Unfortunately the problem is complicated by the fact that the Modell is NOT in the Support database of Toshiba maybe because it was custom tailored for our organization So neither not working WLAN PT534E-00E00CGR) Driver (Tecra-R950-116 quot autodetect my Model quot or entering Serial number on Toshiba Support works just yields quot Model not recognized quot Not very professional After putting the Image on the Notebook there are unrecognized devices in device Manager One is labeled Network Controller more are unknown I downloaded the official Driver for Atheros from Toshiba homepage It installs without error message but device is still shown as non-functional in device Manager In Toshiba Support Forums I picked up the tip to install BT Filter Driver package first but didn't help I WLAN Driver not working (Tecra-R950-116 PT534E-00E00CGR) tried rd Party Drivers There was an constant error of either quot Access Violation quot or quot file not found quot I didn't save the Image the Notebook was shipped with Ordering recovery media would lead to big administrative Overhead WLAN Driver not working (Tecra-R950-116 PT534E-00E00CGR) because it requires credit Card or payment in advance Anything more I can do Here is the Output of Toshiba PC Diagnostic ----------------------------------------------------------------------- Date PC Information Model Name TECRA R Part Number PT E- E CGR Serial Number XC H OS Version Microsoft Windows Professional Service Pack BIOS Version Version CPU Intel R Core TM i - M CPU GHz Physical Memory MB RAM Hard Disk Capacity Byte GB Video Intel R HD Graphics version Screen Resolution x Pixels Network Intel R V Gigabit Network Connection version MAC Address E E B B A Modem None IDE Device Hitachi HTS A A FW version ES O IDE Device MAT A DVD-RAM UJ B Internet Explorer PS-MICOM Version quot quot QFE Information CPU TEST DONE PASS NETWORK TEST DONE PASS Intel R V Gigabit Network Connection Host Controller - E D USB TEST DONE PASS Intel R Series C Chipset Family USB Enhanced Host Controller - E USB TEST DONE PASS USB-Root-Hub USB TEST DONE PASS Generic USB Hub CD DVD DRIVE TEST F SKIP -

A:WLAN Driver not working (Tecra-R950-116 PT534E-00E00CGR)

To be more specific: in device Manager the message for the WLAN device is: No device Driver installed (code 28).

This is an "approximate" Translation of the german error message, wording maybe different in english language Version of Windows 7.
Relevancy 91.59%

Hi I own a Tecra R with the ATI HD M and every now and again it hangs and BSOD appears I've observed that mainly it happens when reproducing flash videos After checking System Events I've discovered it's a problem with the display card driver The event system says that may be a solution here http wer microsoft com Responses Response aspx en SGD feb cd- c b- c a-aeee-ca ca c This webpage indicates that it is a bug in the driver and I must upgrade to the latest driver to solve de problem and it provides a link to ATI webpage I've downloaded the drivers from ATI webpage and the installation program says that it is not compatible with Toshiba laptops I've checked Toshiba webpage and I already have the latest and unique driver for my display card As it appears on the webpage it's a driver bug but Toshiba seems not to have released any update in the driver R850 Display problem - BSOD - Tecra driver despite Ati has Any one can help Thanks Jose

A:Tecra R850 - Display driver problem - BSOD

Hi Jose

Do you use original Toshiba preinstalled Windows or your own version?
Original display driver included in original recovery image is tested so you should not have some troubles with basic stuff like playing flash videos.

Since when have you noticed this issue? Can you give us one example when this happen?
Have you installed some updates?
To be honest I cannot imagine this issue is from the first day of usage.
Relevancy 90.3%

Hi I re-installed my computer since then it doesn't controller - not R850 found network TECRA driver wireless recognize any wireless device or network here-after is part of the result of the Toshiba diagnostic tool The device manager states that quot The drivers for this device are not installed Code There is no driver selected for the device information set or element To find a driver for this device click Update Driver quot However I cannot manage to find the driver after TECRA R850 - wireless network controller driver not found updating the Windows updates etc Please help Thanks lavver Date PC Information Model Name TECRA R Part Number PT E- BT Serial Number B H OS Version Microsoft Windows Professional BIOS Version Version CPU Intel R Core TECRA R850 - wireless network controller driver not found TM i - M CPU GHz Physical Memory MB RAM Hard Disk Capacity Byte GB Hard Disk Free Space Capacity Byte GB Video Intel R HD Graphics Family version Screen Resolution x Pixels Color Quality True Color Bit Sound Realtek High Definition Audio version Intel R Display Audio version Network Intel R V Gigabit Network Connection version MAC Address E D EA C HUAWEI Mobile Connect - G Network Card version MAC Address E F A Modem HUAWEI Mobile Connect - G Modem version Internet Explorer IDE Device Hitachi HTS A A MAT A DVD-RAM UJ A AS FW version Diagnostic Results CPU TEST DONE PASS MEMORY TEST DONE PASS Enhanced Host Controller - C D Enhanced Host Controller - C i LINK TEST DONE NOT FOUND

A:TECRA R850 - wireless network controller driver not found

Your Tecra has ATHEROS 802.11(B/G/N)WB195-HMC W/ BT WLAN card inside and all latest drivers you can find on Toshiba WLAN portal -

Check it out please.

It is card with BT so before you install WLAN driver install BT filter. You can find it on Toshiba download page -
Relevancy 80.41%


I have the Tecra R950 (PT530A-00S001) and find that the fan runs at full/high speed pretty much all of the time.

I am running Windows 8.1 and running on the balanced power setting.

Is this a common issue with this model?

Can anyone give me some info or steps to go about diagnosing the issue or should I just send it to Toshiba as a warranty?

Any assistance would be appreciated.

A:Tecra R950 Fan Speed


I would not say it?s a common issue because the fan activity depends on notebook usage.
The point is that the increased CPU/GPU performance leads to higher temperature due to heat dissipation? and this leads to higher fan activity?

There are no many settings which could be changed beside the settings within the Windows ?Advanced Power Options?. There you can change the cooling method to ?battery mode? and you can also decrease the max CPU performance from 100% to an lower level? lets say 80%-90%
Relevancy 80.41%

I have a Tecra R950-104 and, when I remove the battery, there is a slot for 3G Sim card, just like it says in the manual.

The problem is that Windows (Win 7 64bits) doesn't recognize any 3G modem in the computer.

Thus this mean that only some models have the modem, but all have the slot for the sim card?

I already installed the driver for 3G Modem, downloaded from Toshiba site, the driver was installed without any problem, I have a Sim card that is working - tested in a 3G USB Modem - but still I cant make any connection because Windows cant even find a modem.

A:Can I use 3G Modem on my Tecra R950-104?

You are right, just some models have 3G module inside and, unfortunately your model doesnt have it.
Relevancy 80.41%


I have a Toshiba Tecra R950-104 with almost one year.
Every thing works fine except for HDD.

In this period (almost on year) i had 2 hdd failures (2 hdd had to be replaced!!!).
Fortunately issues occours inside warranty period.

Is there any issues with this machine, regarding HDD (It's a 500GB, 7200RPM Toshiba HDD).


A:Tecra R950-104 HDD failure


HDD issues do not depend on notebook but the HDD usage and notebook usage.
The HDD is an wearing part. Sooner or later every HDD would die.

Such issue can happen mostly because the HDD is affected by shocks while moving the notebook. Furthermore there are many different HDDs on the market. Some are cheaper due to low quality and some HDD are more expensive because of good quality.

So you should keep eye on the HDD quality.
But to be honest, I would never purchase an HDD for a notebook. I replaced my HDD with an SSD drive. Its much faster and more durable as an HDD
Relevancy 80.41%

Tenho um Port?til TECRA R950-186 PT53OE, com o Sistema Operativo Windows 10. Vinha com o SO Win 7, posteriormente actualizei-o para o Win 8 e recentemente para o Win 10.
Depois de o atualizar para a vers?o 10 funcionou muito bem. Significativamente melhor do que com a vers?o 8.1.
H? poucos dias fiquei sem imagem no ecr?. Ou seja com o ecr? preto.
Quando ligo o computador ? perfeitamente vis?vel a mensagem inicial: TOSHIBA Leading Innovation >>>, mas depois do arranque fico com o ecr? preto.
Tenho trabalhado com ele ligando-lhe um monitor externo ? porta SVGA.
J? fiz a atualiza??o do controlador da placa gr?fica, mas o problema persiste.
Agrade?o que me seja apontada uma solu??o.

A:Tecra R950 - Blackscreen

Try this:
uninstall the display driver in Control Panel.
run Windows Update to install the new display driver.
Relevancy 79.55%

how long does it usually take to recharge the battery?

I've got a R950-10U and the NB needs 1h for every 10% charge.
This is an alsolutely unacceptable condition! This R950 is now my 3rd Tecra...
and no one had this problem before!

The system is configured in the balanced battery mode, not in the eco mode!
It it possible to setup the settings for the charching, to accelerate the charging?


A:Battery charging on Tecra R950


Usually you need some hours to charge the battery.
If the battery is new, the charging procedure would takes longer?

You should also calibrate the new battery? this mean that you should charge and discharge the battery until its fully empty and this process should be repeated several times in the row.
Relevancy 79.55%


Having some problems with the win 8 pro dvd included with my laptop.

Bios mode is set as UEFI + Secure boot, win 8 pro dvd starts and i can start recovery, after a while it asks for disc 2 and starts recovering win 8.

After completion and reboot, it won't boot and just shows toshiba logo.

Factory hdd is replaced with SSD OCZ VERTEX 4 regonized by bios.

What could be the issue?

A:Re: Tecra R950-18F: Win 8 Pro does not boot from new SSD drive

>Factory HDD is replaced with SSD OCZ VERTEX 4 recognized by Bios.

Do you have the same problems booting the Win 8 using the original HDD equipped with Tecra R950?

From my point of view it could be possible that notebook does not boot correctly due to the new SSD drive.

I would recommend checking the previous HDD.
If notebook would boot properly, then the problem is related to the new SSD drive.

In some cases it could be possible that the SSD firmware needs to be updated.
Relevancy 79.55%


Is it possible to replace my DVD drive with a SSD disk using a HDD Caddy?

My laptop is a Toshiba Tecra R950-104.



A:Tecra R950-104 - can I replace ODD with SSD drive?


I found in internet some UltraSlim SATA HDD/SSD mounting frame which allow the usage of 2nd 2.5? HDD/SSD drive instead of ODD within the Tecra R950 notebook but to be honest I?m not 100% sure if the BIOS would recognize such additional device.

I know that different Toshiba notebooks (Portege and Tecra) series supported such upgrade in the past but such replacement was not supported by every notebook model.

It depends on the BIOS and in case the BIOS would recognize the 2nd HDD/SSD drive, the system should be able to recognize the 2nd HDD
Relevancy 79.55%

The school where i work have a TECRA R950
when i boot the latop i have a password (it's not a bios password) but i don't know him
how can i proceed to reset this password ?
thank's for the answer

A:Password on boot TECRA R950

when i boot the latop i have a password (it's not a bios password)

Why do you think that this isn’t a BIOS password.
Are you able to access the BIOS pressing F2 button?

If not, the notebook is secured by BIOS password and such unknown BIOS password can be removed only by authorized service provider…

If you don’t know the password, you will need to ask the ASP for help
Relevancy 79.55%

Hi to all.

I would like to know if it is possible to upgrade (buy and then replace) my HDD-SSD (256GB) to one of 500GB/1TB on my Tecra R950-19E.

If yes, you have online stores to suggest to buy?

Thank you.

A:Upgrade of HDD/SSD to 500GB on Tecra R950-19E

I don't see any reason why you could not do this.
Online store? I don't know where do you live but I think you should try to find some online store in your country.
Relevancy 79.55%


Can i install 16GB Ram in my Toshiba Tecra R950-104?

Currently i have 8GB and i would like to replace the existing 2x4GB with 2x8GB.

Best regards,


A:Tecra R950-104 - Memory Expansion


According notebook specification your Tecra can be upgraded up to 32GB and you can use 4 X 8GB RAM modules.
Compatible 8 GB RAM modules have part number PA5037U-1M8G.
Relevancy 79.55%

Hi all,

I have just purchased an Tecra R950, and intermittently the LCD backlight flickers. The effect is similar to previous laptops I have had when the power lead develops a dodgy connection.

With the R950 the screen flickers with power lead connected, or not connected. It does not seem to be related to screen position.

Any ideas as to what is happening? Should I return the unit?


A:Tecra R950 - backlight flickering

Don?t waste your time thinking why this happen. If possible contact your local dealer as soon as possible, explain the situation and ask for replacement.
Relevancy 78.69%

Hi - off by Need deafult switched WiFi Tecra R950-15E all I am new to the forum and would like to ask a question whose answer I was unable to find both on the web and here in the forum at least with my keywords please direct me Tecra R950-15E - Need WiFi switched off by deafult if missed it For some time I own a Tecra R - E running Win Pro bit and am quite satisfied with it The only thing that bothers me a bit is the WiFi mode I know that by pressing quot FN F quot I can switch the wireless modes WiFi and G on and off It seems that by default the wireless modes are switched on after starting the system I'd like to have it all switched off by deafult mainly for saving battery and only switching it on manually when I really need it By now I have to do it the other way round by switching it off manually after Tecra R950-15E - Need WiFi switched off by deafult starting the system and I haven't found a setting to change it to my preference Does anyone have an idea to fix that Thanks tecra

A:Tecra R950-15E - Need WiFi switched off by deafult

I?m very surprised about your question here in the forum because usually the notebook/system should ?memorize? the last Wi-Fi status.
This means that the Wi-Fi should stay disabled, in case the WiFi has been disabled just before login off.

Try to reinstall the WLan driver just to check if this would solve your tiny issue.
You will need to uninstall the WLan driver before starting with a new installation.
Relevancy 78.69%


my finger print sensor has long time worked with Windows 8.1. Since 2 weeks the sensor makes problems. It began with the fingerprint utilty - it shows the message "no sensor found". I uninstalled the driver of the sensor and the utility. After reboot, there where no unknown device in the device manager. That was strange. Re-installing the Fingerprint Utility did not work. It always comes the message "Installation failed. Error code 0x80004005" when I start the Setup.

Yesterday I made complete new installation of Windows 8.1 with all the latest drivers from Toshiba site. I still not found any Biometrie Device or any unknown device in Device Manager. When installing the fingerprint reader software there is the same error 0x80004005 ....

I know no longer here on. Has anyone an idea?
Hardware failures?
Thanks for Help!

A:Tecra R950 - Fingerprint doesn't work

>Yesterday I made complete new installation of Windows 8.1...
Have you installed clean Win8.1 version or upgraded Win8 version that you got with your Tecra notebook?
Relevancy 78.69%

I can not update windows:

1.Run windows update
2.Installed updates
3.I rebooted
4.In the configuration phase to 20% appeared to be the option screen to restart or reinstall
5.I restored the computer to a previous restore point

anyone have the same problem?
Maybe you have to reinstall windows?

A:Tecra R950 - Windows update does not work

>Maybe you have to reinstall windows?
From my point of view the new Recovery process and the final Windows update should work properly but I think first of all you should try some alternative workarounds.

This isn?t a notebook problem?.definitely. Its Microsoft issue and therefore I recommend you to check some fixes provided by Microsoft.

Check this Fix Microsoft Windows Update Issues doc:

In many cases it?s essential to remove some previous installed updates to be able to finish the whole update procedure.

You can also try to install the single updates one by one. This is also an possible option.
Relevancy 77.83%

Brand New Tecra R950 with Toshiba dynadock.

Installed applications. MYOB, Office etc OK.

Windows updates. Reboot and blank screen. Power OFF / on. Need windows repair to recover. After long time, up she comes. Need to re-install everything.

Install applications, reboot, create restore point ;)

Do updates (windows in groups). Create restore point after each reboot.

Was working fine. Client used without DOCK connected. Shutdown. Connected dock and powered on next morning. OK. Machine went to sleep - could wake up. Power off /on, Windows fails to start once again, wants to do repair - after long time: failure, unknown auto failover, bad patch. Restart and it comes up???

What is happening with this machine?


A:Tecra R950 constantly wanting to run windows reapir

> What is happening with this machine?

Good question?
What do you think?
HDD issue? Microsoft Windows software problem?

Would recommend checking the Event Viewer.
This is an advanced tool that displays detailed information about significant events on your computer.
Usually the system problems should be mentioned too.
Relevancy 77.83%

follwing Problem:
Tecra R950 with Intel 520 series SSD and HDD/SSD password set = always F4 BSOD after wakeup from sleep.
OK with no password set.
OK with hibernate.
Same problem with iastor and msahci driver.

Any ideas? Think that it is a problem with the bios. It drops the ssd when wakeup, even can not write a memory dump (error 0xc0000010), cold boot required.

A:Tecra R950 with Intel SSD 520 and SSD Password set = F4 BSOD after wakeup


Did you replace the SSD drive?
As far as I know many of the Tecra R950 was equipped with an 500GB HDD.

I could be related to the SSD drive?
Relevancy 77.83%

I recently bought the mentioned notebook and everything works fine.

if the dynadock is connected to any USB Port the notebook stops booting after a few seconds.
The windows flag freezes ans nothing happens.

The same problem comes up if a USB Stick is connected to any USB Port of the R950.
If the DynaDock or the USB stick is attached to a different Notebook everything works.
So it must be something with the R950.

I already checked the boot device priority and and pushed the USB device to the end of the list without any result.

I hope somebody can help me.
thx in advance!

A:Tecra R950-10V PT530E stops booting if USB port is used


Try to set the BIOS to default (F9) and check if it helps?
Additionally check if the BIOS update (if possible) would solve this?
Relevancy 77.83%


I have an Tecra R950-16L for about 3 months now everything works fine. Now since a few days I have the problem, that sometimes, especially after I transported the notebook before, the internal display stays black after I power on the notebook.

I can blindly type my password and see from the disc activity that windows is starting probably, but no display is shown.

After I move the notebook around and shake it a bit it sometimes works again and the it stays working until I move the notebook again somewhere else (at least this is what seems to make the effect occur).

Seems to me like a loose connector to the display or something like that?

Is there any chance to repair this on my own?
I do need my notebook all the time and do not want to send it for repair if not 100% neccessary.

What do you suggest?

Michael Czierwitzki

A:Tecra R950-16L - Display stays dark on power up sometimes

>Seems to me like a loose connector to the display or something like that?

Yes, it looks like there is a loose connection or maybe something wrong with the lid sensor.

>Is there any chance to repair this on my own?
I don?t think so.
You would need to check what?s wrong exactly. After this has been checked, you would need to disassemble the notebook and this is not easy. Last but not least you would need the compatible parts to replace the affected hardware? I don?t think you can do that?

>I do need my notebook all the time and do not want to send it for repair if not 100% necessary.
Well, you could ask the Toshiba authorized service provider for details and how long such repair would take.

Here you can find all ASPs worldwide:
Relevancy 77.83%

My Tecra R950-F0036 touch pad suddenly stopped working (Serial No.4D027959H bought in South Africa).

I have tried all the usual options such as updating the driver.
The driver appears to be there but FN F9 does nothing to switch the pad on.

Any ideas on how to re-activate the touch pad?

A:Tecra R950 - touchpad has suddenly stopped working

I don't know which OS do you use but check please hardware status. Check please device manager and be sure touchpad is listed there and enabled properly.
Relevancy 75.68%

I'm considering buying a Toshiba Tecra R850 laptop, made in 2011, and even though it's been reconditioned by a reputable local computer company (and comes with a 3 month warantee) I'd like to know if there's been any known problems with this particular model. The other main specs with this laptop are that it's i5, 2520M 2.5 GHz. 4 Gb RAM, 320 Gb HD
Thanks in advance for any help.

A:Any known issues with Tecra R850?

Anyone out there with helpful answers?
Relevancy 75.68%

What kind od RAM and VENDOR are installed on Toshiba Tecra R850 - 147 (Samsung ? Kingston ? OCZ ? .... ? )


A:Tecra R850 - 147 - Question about RAM

Remove the RAM cover and check which modules are inside. It is fixed with two screws.
You don?t need more than two minutes to find out who is RAM manufacturer.
Anyway I think it must be Hynix or Samsung.
Relevancy 75.68%


On a Tecra R850, i can't use the FN key. I install all driver from toshiba and they does'nt work



A:Tecra R850 with Windows WXP - can't use the FN key


The whole thing is a bit complicated with WXP and it is important to install all stuff in right installation order. After some basic drivers like chipset, display, sound you should install common modules at first and continue with Toshiba specific tools and utilities like controls, display device, power saver and so on.

Can you use any FN key combination or none of them is working?
Relevancy 75.68%

Despite the claims that the R850 (with Radeon graphics) will do 4 displays, the most I can manage is 2. I'm trying to connect 2 external LCD monitors and still use notebook as another screen (3 in total).

I've done a lot of searching and although I can find plenty of people having the same problem, I cannot find an answer. I've tried updating the driver although that caused more problems than it solved. I am using W7.

Can someone tell me how to use more than 2 displays on a Tecra R850?


A:What can't I run more than 2 displays on my Tecra R850?

>I'm trying to connect 2 external LCD monitors and still use notebook as another screen (3 in total).

In such case you will need to use an external device like Dynadock

There are different models on the market? check some which would be the best solution for you..
Relevancy 75.68%


How can I enable HT on my notebook ?

A:How to enable HT on my Tecra R850-147?


Would you be so kind as to explain what you mean with ?HT??
Relevancy 75.68%

Today my son try to clean his computer but hi delete all disc C and his computer don't have nothing. What can i do?

I think intall a version of windows and the drivers but where are the drivers?. If some one have a better idea pleas tell me.

Sorry for my english

A:Deleted all on my Tecra R850

I don't know which OS have you use and how your Tecra was configured but if possible reinstall original recovery image. If possible make HDD recovery installation as described on

You can also use recovery disc if you have created it in the past. After doing this you will have clean preinstalled OS. Please check if this works for you. If not let us know.
Relevancy 74.82%

I recently brought +Logitech Stereo Headset H110+ for my +Toshiba Tecra R850-151+. I used a +3.5mm 4 Pin to 2x 3 Pin 3.5mm Headset Splitter Adapter+ to connect it.

The Headset works correctly as I tried them with another computer.
And with my Tecra R850 the earphones works correctly.

Now, the problem is that the microphone is not recognised with the sufficient volume.
The speech recognition works halfway as the green bar goes up very slightly when I talk through the headset but not enough to recognise my voice. In advanced options I tried to edit the microphone properties increasing the +Microphone level+ up to 100 and +Amplification level+ up +30.0 dB but still the headset did not recognise correctly my speech.

If someone could help me I would appreciate.

A:Headset mic low volume on Tecra R850-151


Did you already check the Realtek HD audio manager which can be found in control panel?
There are different tabs like Speakers or Microphone.

I recommend you to check microphone tab where you could find different settings like playback level and recording level.

You can also enable the noise suppression which should be also part of the mic
Relevancy 74.82%


I bought R850 with SSD.
The bad thing is that SSD 256gb installed is limited to SATA II with transfer up to 300/mb. I read that Sandy Bridge Supports SATA III which covers 600/mb.

Is somebody successfuly installed better SSD disk capable with SATA3?

I tried Sisoft Sandra and it reported that SSD SATA is II, the same for Motherboard. The HwINFO reported that chipset is capable with SATA 3. The Everest shows only SSD data with SATA 2.

Is the bios blocked for higher transfers ? I got 180mb/s read, 150 mb/write - which is 3x worse than normal SATA 3 256gb SSD harddisks.

Can anybody help me and tell - if it is matter of R850 bios ? or just only the old Toshiba SSD firmware ? if I buy better SSD with SATA3 - will it fully support higher speed ?

Best Regards

A:Tecra R850 - SSD support for SATA III 6.0GB


I?m not sure what R850-xxx notebook you have but as far as I know this series is equipped with one for the Intel (Sandy Bridge) i3/i5/i7 CPUs.
Also the notebook supports either Intel Cougar Point QM67 (AMT model) or HM65 (Non-AMT model). Both supports SATA II (3Gb/s) and SATA III (6Gb/s)

But for example if the host interface is 300MB/s you get sustained Data Read : Max 250MB/s and sustaine Data Write : Max 160MB/s
Relevancy 74.82%


Some time i got BS, i quess from ATI Graphic Card.
I take a screen shoot, please take a look, and tell me whats going on. [|]

A:Blue screen on Tecra R850-147

you are preety cool. Send some screen shot and want to have answer for your problem but without any relevant info in your posting.

For instance it will be interesting to know which operating system do you use.
Do you use original OS that you got with your notebook?

When the BSOD is shown? At the stat-up or later when OS is loaded?
Have you tried to do anything about that?

A few more sentences about this issue can be very useful.
Relevancy 74.82%

Good afternoon I am low Tecra resolution R850-151 and monitor contacting you to realizaros a technical question regarding a Toshiba Tecra R - model part no PT E b h and serial number I explain the scenario I have installed the laptop in a docking station this Tecra R850-151 and low monitor resolution one monitor keyboard and mouse I have installed the driver downloaded from your site for this laptop model and operating system and Tecra R850-151 and low monitor resolution I have configured in the control panel Intel Graphics and Multimedia screen operating mode displays clones both displays in x resolution and respect me as an administrator entering the operating mode of the screen and resolution the bug is when I access the system with another user without administrative privileges in this case the resolution does not respect me and sometimes not the operating mode of the screens I beg facilit is a solution to this issue because it is essential that resolution on both screens and the problem is that entering the system with another user respects me when I agreed resolution specically as administrator and if I change the theme of the screens or judgment as a user when I turn off the computer and turn on again you ignore the specically By the way I installed the OS twice now and the error persists and I installed the latest driver you have on the Web and previous to that as well and still the same A greeting

A:Tecra R850-151 and low monitor resolution


Did you notice this if you would use the Toshiba preinstalled image?
Recover the notebook to the factory settings using the HDD recovery and test this again.
Relevancy 74.82%


I am thinking of buying a Tecra R850-1D8 to connect it to a Samsung LS27A850DS monitor (2560x1440 px). Both the laptop and the monitor have a DisplayPort, and if I am not mistaken, the Tecra R850 uses the QM67 Express chipset which should support resolutions up to 2560x1600.

HOwever, the Tecra R850 specifications specify a maximum resolution of 2048 x 1536 for the external monitor, which puzzles me. Can anyone tell me if the R850 supports an external 2560x1440 display via DisplayPort?

Thanks already!

A:DisplayPort at 2560x1440? (Tecra R850)


You can download user?s manuals and open page 111 to find info about DisplayPort but unfortunately there is no table with supported resolutions.

It is listed for HDMI only.
Try to talk with your local leader. Maybe they have one in show room and you can test it.
Relevancy 74.82%

Computer OS Windows bit Toshiba Tecra R Processor Core i M fan vs on noise Loud R850 (HDD Tecra SDD) Sandy Bridge Grafik AMD HD M BIOS Ver Gentlemen in our company we use since months the Toshiba Tecra notebooks The noise of the fan is for us to loud you hear still the fan sitting one meter far away from the computer no CPU load What helps a little bit was to change in the Control-Center the Power-Options Change Plan Settings - gt Change advance power settings - gt TOSHIBA Power Saver Settings - gt Cooling Method to Loud fan noise on Tecra R850 (HDD vs SDD) Battery Optimized But you still hear the fan which is running at Loud fan noise on Tecra R850 (HDD vs SDD) - when CPU System temperature is Celsius On of the guys gets last week also a new Toshiba R notebook it is absolutely quiet The difference is that in his notebook a SSD is installed instead of a HDD Could it be that the SDD make the fan noise difference we don't believe it Maybe someone has made the same experience and has a solution Thanks in advance Regard VILSG

A:Loud fan noise on Tecra R850 (HDD vs SDD)


I've a R840-16J. Last week I replaced the original Seagate Momentus 500GB 7200.4 HDD for a Plextor M5Pro 512GB SSD.

Yes it is true, now is much more quiet and...there's no vibration at all.

With the HDD I could feel all the computer vibrating in the palm of my hand!!!! No there's a quiet no vibration laptop!

And, believe it or not, one of the reasons to go the ssd way (well, not the main reason) was precisely the noise and vibration of the 7200 rpm internal hdd.

Relevancy 74.82%

Please, can someone help me with SATA 3 support on Tecra R 850.

How to enable that, i've already updated bios but that didn't help me! Found somewhere that toshiba intentionally didn;t support SATA 3 although chipset support that.?????


A:SSD SATA 3 support on Tecra R850

As far as I know SATA 3 controller isn?t supported on Tecra R850.
Relevancy 74.82%

My screen died last year just lost the brightness. I replaced it with a new one but still no brightness. If I hold it the right way in the light I can see the screen very faint. what could the issue be?


A:Tecra R850 - Screen is very faint

I cannot say for sure but I think there is a problem with “background light” – FL inverter.
Relevancy 74.82%


I've recently purchased a 2nd hand Toshiba Tecra R850.

Is it normal for the laptop to start loading Windows, on opening the lid?

I always perform a proper shutdown when I will not be using the laptop - and I have always expected to press the on button to start it.

So is this normal for the laptop to start when I open the lid? Is there an override?


A:Tecra R850 starts when opening lid

I can answer this myself. I went in to the BIOS and there is an option for the laptop to automatically start up on opening the lid. I set this to Disabled.
Relevancy 74.82%

Hi on Tecra R pt e disk had pt524e drivers Tecra R850 a bad sectors and i replace it with SSD IT was not a big deal installed windows then i have a big problems with drivers for toshiba wireless and other drivers all drivers downloaded http www toshiba eu support drivers colunt start to install Tecra R850 pt524e drivers some of them installed but it was not effect like display driver ATM tool on toshiba notebook it was also not working I Tecra R850 pt524e drivers spend hours to figure out what is wrong Some of drivers return bios then i try to upgrade Bios also return old version wtf this toshiba is from Mars Tecra R850 pt524e drivers yes this toshiba is for adriatic region this is the reason why display was changed keyboard space is not working properly and disk dies I have HP all the time and i have never have problems daily is used for hours sometime it is turned on h a day Any help about drivers and download br Dani
Relevancy 73.96%


I'd update my laptops Tecra R850-1EP on windows 8.1, after a windows update, I couldn't use the fingerprint to logon my windows account.

When I'm in my session, the fingerprint do it's job, I can manage my fingerprint.

I'd already try to unistall/install the fingerprint utility and the drivers.

On the logon, I've not the fingerprint logo like as I'can't use it

Any idea ?


A:Tecra R850-1EP: Cannot use Fingerprint on logon Windows 8.1


To be honest, I don?t know exactly what?s going wrong with the fingerprint procedure but I guess this can be related to wrong update to Win 8.1
Probably you did not follow exactly the update procedure which was recommended by Toshiba.

Here you can find the Update to Windows 8.1 Toshiba EU website:

and here you can find the [Step-by-Step Instructions to update to Windows 8.1 |]

You have to follow exactly these steps in order to get the notebook working properly.

Therefore I recommend you to set the notebook back to factory settings and to repeat the whole update process once again following the +Step-by-Step Instructions+
Relevancy 73.96%

Hello I would appreciate some thoughts on the problem The problem The battery is not being charged The icon in System Tray says that the battery is quot plugged in quot but is quot not charging quot and quot Consider changing your battery quot Something similar to https bd Tecra "plugged battery charging" not R850, in, https cdn softlayer net BD images Tecra R850, battery "plugged in, not charging" consider-replacing-your-battery png Also the battery charging indicator is turned off What happened I was using the computer on the battery While using it the message appeared that the battery is at critical and computer suddenly shutdown or went to sleep hibernation It is possible that the battery was empty since I was not charging it Tecra R850, battery "plugged in, not charging" for days What was strange is that I did not get the message that the battery is at which is normal warning I get The next day I plugged in the power cable started computer While booting computer asked do I want to start in quot Safe mode quot or quot Normal quot I selected quot Normal quot Then I noticed the problem described above The history Nothing in particular Notebook is less than year old Battery was holding hours now dropped to some hours but had no previous problems No power surges did not drop the computer etc Observations - The computer works without battery only on power cable - The computer does not react if I put only battery without power cable although it says that battery has it said there is before the initial shutdown though - When I plug in the power cable the battery charging indicator is on for - seconds in orange and then is off This happens every time I take the cable out then in - What is strange is that every time when I turn off wireless mobile networks using quot Flash Cards quot and restart computer they are quot on quot again Before this was happening only when computer had a crash or I did forced shutdown holding the power button - I have tried what was suggested on Toshiba forums Remove power cable battery clean contacts put all back Leave to charge few hours - gt The battery charging indicator was not on after few hours Remove battery start computer Go to quot Device manager quot Uninstall Microsoft ACPI-Compliant Control Method Battery Restart computer Microsoft ACPI will be installed again Shutdown computer Put battery start computer - gt No change battery still not charging indicator is not on I have performed quot Factory reset quot After recovery and restart there was no change This time when I turn off wireless mobile networks using quot Flash Cards quot they stay quot off quot even when I restart computer which was not the case before quot Factory reset quot However if I take out the power cable and then put it in while the computer is shut down and then start the computer the wireless mobile networks are again quot on quot Any thoughts Thanks Miodrag

A:Tecra R850, battery "plugged in, not charging"

On the picture an information is shown: ?consider replacing your battery?. This would mean that the battery is somehow faulty.

I guess you would need to replace the battery using, new original good tested one.

I don?t thins that there is some kind of software problem since you have already tried the factory reset and notebook recovery. In case of software problems, this procedure should solve all ?software related? issues. But it didn?t.
Relevancy 73.96%


I Cant Find My Laptop Which is R850-1KX in the support portal
My Product code is PT52SE-001001FR.

So please if there's anyone who can help me i'll appreciate it.


A:I cannot find the Tecra R850-1KX on the support portal

As far as I know not all notebooks can be found via support portal.
As you said, Tecra R850-1KX has an model number: PT52SE-001001FR
It seems that it was released in France and the unit belongs to PT52SE series.
If you need drivers for this unit, go to Toshiba EU driver page and choose the R850 PT52SE series
Relevancy 73.96%


I need to have the sound out to an amplifier and i need to put 4 microphones through a mixing table als input.

How can we do that with *just 1 mini jack (* any adapter to 2 mini jack??)

Thanks for any help

A:Tecra R850-1HU: how to connect 4 external microphones


Never tried to use 4 microphones but I think you will need to use an external device, something like 4 channel microphone mixer? but I think this forum is the wrong place to talk about such themes since this is not really related to the notebook but to DJ equipment.

However, please share your experience with us after you have managed to connect 4 mic to the notebook.
Relevancy 73.96%

i want to install a hardware for 3g mobile broadband in my Tecra R850 pt520a-01s003. is it possible?

A:How to install 3G Broadband Modem on my Tecra R850

This is pretty new machine and I don?t think someone here can help you with this.
I don?t know if this model is ?ready? for such upgrade.

I recommend you to contact nearest Toshiba service and ask for help. I?m pretty sure they have exact hardware plans and maintenance manuals where they can check if such upgrade can be done or not.

By the way: where do you want to buy missing hardware for upgrade?
Relevancy 73.96%

After shutting down my Tecra R850-117 it will automatically restart after exactly 5 minutes.

This is unwanted behavior because it drains the battery while I'm not using the laptop and it could also damage the disk carrying it around while running...

Anyone knows what could cause this behavior and how I can stop it? The laptop is 6 months old and I'm only noticing this behavior since the last few weeks. I already noticed the battery would be drained after not using it for a few days (probably due to the same issue?), but never before noticed the unwanted restarts...

Thanks a lot in advance for any useful advice.


A:Tecra R850-117 boots up 5 minutes after power down


Did you disable the WakeUp options in BIOS?
Check this!
The enabled *WakeUp* options could power on the notebook even if the unit is powered off.
Relevancy 73.96%

hello :-) ,

do you know where to find the maintenance guide of the TECRA R850 -146... if it exists. Thanks in advance :-)

A:Tecra R850-146 - Where to find maintenance guide?

Unfortunately, maintenance manuals are available for Toshiba authorized service providers only.
Relevancy 73.96%

Good Day So I've had my R for a few years now and R850 Jack Issue Audio Tecra it's never given me a moments trouble However on Monday a silica bead managed find it's way in to the headphone jack This happened due to an unnoticed broken silica sachet in my laptop backpack and putting the laptop into the backpack one of the beads was pushed into the jack The intruder was not noticed until I tried to plug in my headphones unfortunately forcing the bead in further Be that as it may I have managed to free the bead but I fear that there is now permanent damage When I plug in the headphones the speakers do not cut out Audio does play through headphones but the quality is very poor compared to what it used to be So I am not sure if perhaps the bead short circuited something doing lasting damage or if it just pushed a contact out of the Tecra R850 Audio Jack Issue way inside the jack which is now not engaging with the headphone plug Is there anything I try in an effort to resolve this I really can't afford huge costs to have the plug replaced Thanks Bruce
Relevancy 73.96%

The original keyboard, the replacement i installed and occasionally the USB keyboard all randomly type, erratically fail to register commands and lag.

This occurred in windows 7 and continued into 10. I've removed the keyboard and cleaned it with compressed air, and installed the latest chipset drivers for my model, but still have trouble.

Device manager names the keyboard as Lenovo ThinkPad PS/2 keyboard. .

A:All keyboards buggy on Tecra R850-S8540

The lenovo is the external USB keyboard right?
The internal keyboard should be: Standard PS/2 keyboard

Remove any external keyboard and mouse drivers (Logitech etc..).
The internal keyboard might have a liquid spill in it.
Relevancy 73.1%

I want to connect my laptop to a DVI screen and it only has a DisplayPort (and VGA but I do want to get the full resolution) port.
So I need an adapter.
Can I use a passive adapter or do I need to buy an active?

A:Tecra R850-117: Need info about Display Port to DVI adapter


As far as I know the DisplayPort on the left side complies to the V1.1a standard.
This means that the DispplayPort is compatible with DVI and HDMI standards so you can use an DisplayPort to DVI or HDMI adapter.

So you could use something like that:
<img src='' border='0' width='300' height='200px'/>

Relevancy 73.1%

Hey Guys I have a weird bug with a clients Toshiba Tecra R lan on problem Port startup Replicator Tecra R850 - - no notebook with the port replicator It's about months old Almost each morning when the client connects the laptop to the port replicator and powers on and boots to the Windows desktop it doesn't create a quot LAN quot connection external monitor amp USB work through the port replicator though I have to get the client to power Tecra R850 - Port Replicator problem - no lan on startup off the laptop unplug it from the port replicator unplug the power from the port replicator and then plug everything back in and turn the laptop back on Here is what I have ruled out so far Port replicator I have replaced the port replicator with another users unit exact same model same issue Connected LAN directly If I connect the LAN directly i e completely remove the port replicator I get no issues with LAN Internet connection Here is the part number of the laptop and the dock Tecra R PT A- N Port Replicator II PA A- PRP Any ideas Could this be a faulty docking port on the laptop Kind Regards Aaron

A:Tecra R850 - Port Replicator problem - no lan on startup


Don?t think its faulty docking port because in such case other Port Replicator ports would not function too?

I think its system issue? did you test the port replicator with fresh recovered system?
Would be definitely worth a try?
Relevancy 73.1%

The display driver I have installed is the preinstalled one. It is the last version I see in Tosiba download web (8.801.2.3000). If I use Windows Update the reponse is that there are not newer version.
When I try to open Catalyst Control Center to adjust parameters, I see in the process explorer (sysinternals) a ccc.exe program running, but nothing happens, that is, I don't see any wndows.
If I execute the driver installation program, it fails at the beginin and nothing is installed
Oprating system is W7 profesional (preinstalled). UAC is deactivated

Message was edited by: PacoHache

A:Re: Tecra R850-1J5 - Can not open Catalyst Control Center

Hi :

I have solved the situation downloading the catalyst software from AMD web pages
Relevancy 73.1%


We have hundreds of these laptops and use encrypted HDD's in them.

On a soft reboot they cause the HDD to re-encrypt itself due to losing power during the soft reboot.
Has anyone got a workaround for this (BIOS settings, Updated BIOS) that will not cause this issue for us?
I believe we are currently on the BIOS version 2.'something' if this helps any.
Thanks in advance,


A:Tecra R850 cuts power to HDD on soft reboot

The notebook powers off for a moment during a warm reboot. A BIOS update wont change this.

Perhaps you should use Bitlocker instead.
Relevancy 73.1%

My Tecra R850-11U has 8GB (2x 4GB) memory inside. I am running W7 professional 64bit and the machine only shows 4GB as memory.

I allready upgraded the bios, but the bios also shows 4GB. I have 2 banks of original samsung memory in it; changed one to an kingston bank but it still doesn't show more than 4GB.

How can i solve this problem?? I like full memory

A:Tecra R850-11U doesn't recognise full memory

The chipset supports 8GB RAM so you should be able to use the 8GB.
But if the BIOS does not recognize the 8GB RAM then one of the modules could be faulty or not compatible with another module.

This is only and one plausible explanation for me
Relevancy 73.1%


My Tecra R850-1CL (with Ericsson 3G modem) has 2 led indicators for network : a yellow LED for WiFi, and a blue LED for 3G.

Under Windows 7 64-bit, everything was working OK, and Fn+F8 allowed to switch on or off WiFi and 3G.

Since I upgraded to Windows 8, Fn-F8 does only switch to plane mode, yellow Wifi indicator is always on even in plane mode, and blue 3G indicator is almost always on, even when 3G is not connected or when adapter is disabled.

I have done W8 upgrade with Toshiba upgrade utilities, and computer is up to date (BIOS and Drivers).

How cant get correct behavior for network LED indicators ?

A:Since Win 8 upgrade Fn-F8 does only switch to plane mode on TECRA R850

And WLAN and 3G are working properly, right?
Relevancy 72.24%


Is it possible to have the resolution in vga as 1280-1024 in external output or using the display port?
I have just seen the 1024 / 768 in the resolution 4/3 format

Maybe in the catalyst graphic card i have look in it without any success

All the resolution for output is in the 16/9 format

Thanks for any help

A:Tecra R850-1HU output VGA external in 1280-1024 (4/3 format)


The display port supports max 2560 x 1600 /32bit resolution.
But the available external resolution depends on the external monitor and the graphic card driver.
If both would support the favorite resolution (1024 / 768 ), you should be able to choose this?
Relevancy 72.24%

I got a R850 and complete random the laptop lockups. When it locks up fans begin to spin full speed and windows is locked up. I need to poweroff the laptop and start again.

This can happen three times on a evening, but it can also occur only ones a week.

Its complete random.

A:Tecra R850 - sometimes OS stuclocks-up, fans spin on full speed

On this virtual way it is not easy to say what happen exactly.
Every new notebook is delivered with clean preinstalled OS and something like this should not happen. Later when you start to install updates or own applications it can happen that some background application ?blocks? the system.

In my opinion either you must check preinstalled stuff, processes that run in the background to see which one can be responsible for this, or you must install recovery image again and check how it works with ?factory settings?.
Relevancy 72.24%

Hello all I need help with some issue My system says that I have GB RAM available for applications services etc The rest graphic How card? of the can shared memory - Tecra R850 I the reduce of it between and GB RAM is shared and Tecra R850 - How can I reduce the shared memory of the graphic card? reserved for the graphic card I searched for a way to reduce it via BIOS how it normally works tried an update for the bios hopping that it would add this feature But that wasn't the case I can't understand why Toshiba doesn't allow his customers to modifity this setting I can understand to put such a setting by default but also giving an option for advanced users to modifiy this setting GB RAM are not very much and I Tecra R850 - How can I reduce the shared memory of the graphic card? often need more than that MB more RAM for sys would be really nice And bit OSs are currently not supported in our company So does anyone know a way to reduce the shared memory to e g MB My system specs Windows Pro SP bit Modell TECRA R Serialno B H Partno PT E- E KGR Thanks in advanced for your answers null

A:Tecra R850 - How can I reduce the shared memory of the graphic card?

As far as I know shared memory works automatically and notebook user cannot control it.
It is nothing new and the same principle is on all Toshiba notebooks.

Sorry but there is nothing to do about it.
Relevancy 72.24%

I factory reset my laptop yesterday and every since the internal mic only works when nothing is plugging into the jack socket, including headphones without a mic and speakers. This was never a problem before the factory reset and i could plug headphones in to hear people and could use the mic to talk.. now i can only talk to people when nothing is plugged in meaning i have to hear people out of the laptop speakers..

Any ideas guys? I dont want to have to buy new headphones :/


A:Tecra R850 - Internal mic doesn't work when headphones are plugged in

Check settings in sound properties (playback and recording devices).
Be sure Microphone is listed and enabled in recording devices.

Please check all this and send some feedback.

I have two Toshiba notebooks and everything works perfectly so I don't see some reason why it should not work on your Tecra too.
Relevancy 72.24%

i've not find on toshiba site, the driver for the PC Card slot for 1x Type II card, type : Express Card slot ?
where is it possible to download it?

A:Re: Tecra A7 - Win XP driver for PC card Type II needed

The PC Card slot does not require additional driver and therefore the driver isn?t available for download
Relevancy 71.81%

Hi I got Tecra R - e for months from the begining I have the same problem - loud fan but no cpu load about - using win and win bit I tried to change windows profile to optimized or to power saver but i still get no and - load Win7 Tecra fan 64bit Win8 - - loud cpu R850-520E the fan to noise I upgrade the bios to I re-checked windows and still the fun ist loud when no cpu is used Notebook is cool - so I don't know where is the problem probably this is bad driver for ACPI or for temperature measuring I tried to change the notebook position - and I found two metal plate on Tecra R850-520E - loud fan - no cpu load - Win7 and Win8 64bit the bottom I think it is a temp measure sensors when I rotate the Tecra R850-520E - loud fan - no cpu load - Win7 and Win8 64bit notebook and the plates are quot on air quot Tecra R850-520E - loud fan - no cpu load - Win7 and Win8 64bit not touched by any material - the fan is going to slow down in minutes Could somebody tell if any speed fun will work or maybe Toshiba will update the bios or drivers for it finally The comfort for business laptop is very bad I have SDD - and this is limited too I didn t supposed that Toshiba will sell such a sh Could anybody have some drivers or setting that will slow down the fan in windows bit T

A:Tecra R850-520E - loud fan - no cpu load - Win7 and Win8 64bit


You need to adjust the Windows Power Plane settings in order to improve the cooling system.

<Setting Method>
Changes in Operating System:
Control Panel --> Power Options --> Change plan settings --> Change advanced power settings --> TOSHIBA Power Saver Settings --> Cooling Method

Changes in Bios (Power Management):
Intel Turbo boost Technology

Changes in Operating System:
TOSHIBA HW Setup --> CPU Frequency mode

Try this settings:
Power plane (Toshiba power saver) Battery optimized
Intel Turbo Boost technology (BIOS) - Disable
CPU frequency ? Always low

From my experience this should reduce the noise.
Relevancy 71.38%

Hello, I bought a refurbished Tecra A 11 19L, Windows 7 Prof. 64-bit installed.
Any drivers-CD is added.

Installed is a WLAN-Adapter-driver for Atheros AR 9280.

From beginning there were problems to enter my WLAN-net (other devices don?t have any problems), so I often had to restart. Since yesterday there is no more entering possible. I reinstalled the driver but: the same.
When I searched for depending drivers on Toshiba-site I didn?t find a driver for Atheros / Win 7-64.

May be the preinstalled driver is wrong? May be it is no Atheros AR 9280?
When I deinstalled the driver only an unknown network-adapter is found, automatic search on PC doesn?t find a depending driver...
May be you can help?

A:Tecra A11-19L - WLAN Driver for Win7 64bit needed

Try this driver
Relevancy 70.95%

Without telling a long story of frustration leading up to this request Please can anyone tell me where I can obtain an installable copy of the last published HP driver for my HP Series Deskjet Needed. Driver 970 Hp Deskjet Cxi Yes I know the printer is old but like a lot of older generation hardware from Hp Deskjet 970 Series Driver Needed. HP my DJ printer was still going on strongly That is until HP pushed an update to the HP Support Assistant on my Touchsmart p c an update that uninstalled and then deleted my printer driver HP excuse quot your printer is out of support life quot All information about HP hardware over ten years old has been wiped from the support servers Still struggling with WIN I thought I had auto-backup operating in which case I could have restored from an earlier system build well NO the auto -back up had not done any backups since the beginning of the current year Give me WIN K Pro any day it works all the time I have had some bad experiences with the commercial driver providers including refusals to honour money-back warranties I will willing buy someone s original driver disk I run WIN K Pro on one older HP P C and WIN on my newer HP e-mail PC Until its erasure the last version of the genuine HP driver ran quite happily under both versions of the WIN OS nbsp
Relevancy 70.09%

After formating I am unable to find PCI Serial Port driver.

Is there any one who has similar driver problem?

A:Other devices PCI Serial Port driver for Tecra R840-A208 needed

Have you installed own OS version?
Have you started to install drivers for your machine?
Have you installed chipset driver at first?
Relevancy 69.23%


I formatted my VAIO VPCEG2AEN laptop with Win 7 Ultimate 32 Bit which originally came with Home 64 bit.

The problem now is I am not able to find any 32 bit drivers.

What can I do, PLEASE HELP!

A:Sony VAIO VPCEG series 32 Bit Driver Needed !

Hi there
Try fiddling around on THIS site (Sony Asia)

Support for VPCEH15EG : E Series (VPCE) : VAIO™ Notebook : Sony Asia Pacific

(Ok that's my model) but yours should work -- if you can't find the EXACT same one try one that's similar. Sony won't change drivers for every possible piece of hardware -- a lot of these will work on most models of a similar series. Usually it's just the screen and video that's different.

Forget trying to find anything sensible on European or US sony sites. Fortunately the Asia site is in English.

Relevancy 65.79%

Dear guys,

I have a Tecra R850 laptop (the graphic card is an AMD Radeon HD 6450M) with a PA3916A-1PRP port replicator.

I already have a 23" running at 1920x1080 connected via HDMI.
I would like to buy a 27" to run it at 2560 x 1440.

So my ideal configuration would be the 27" at 2560 as main monitor and the 23" at 1920 as second monitor. One monitor (the 23") has Display Port, DVI and VGA input, the other one has DVI, Display Port 1.2, Mini Display Port 1.2, HDMI.

Is it possible to connect them as I wish (I would love to avoid the use of VGA)?
Do I need other stuff (another docking for example) to accomplish that?

Any idea is good for me!

Thanks a lot


A:Tecra R850 with 27" display at 2560 x 1440 and 23" display at 1920x1080


Generally speaking you may be able to connect two external monitors at a time depending on your notebook model.

In user manual of Tecra R850 you can read that when the Toshiba HI-Speed Port Replicator II is connected to the notebook, you cannot use _notebook?s_ external RGB (VGA) port.
This port will not work.

Furthermore you cannot use port replicator?s HDMI port and Display Port at the same time.
The hi-speed port replicator II contains a slider which can be moved to choose either the HDMI port or Display Port.

So it seems that you have one option to connect two externa monitors: (VGA + HDMI)
one monitor to HDMI/Display port and other to VGA/RGB port (port replicator's RGB port)

Another option to connect two external monitors at the same time, you should use another docking solution like for example Dynadock U3. It supports an HDMI and DVI port which can be used at the same time.
Relevancy 64.07%

Hi I have some Toshiba Tecra M series but for some reason the laptop no longer works with a battery attached and just get flashing light on the laptop It works fine with power but won't swatch on at all with a fully charge battery I have tried many and it's not the battery I have taken the laptop apart but can t find anything that is wrong So it must be the battery motherboard M10 Toshiba same Tecra the series series A10 asTecra motherboard? and or charge circuit resisters gone on the M Anyway Toshiba Tecra A10 series motherboard the same asTecra M10 series motherboard? I was looking at a motherboard replacement On looking about it appears that Toshiba released a M and a A series They both look about the same to me with the same Toshiba Tecra A10 series motherboard the same asTecra M10 series motherboard? fittings but to be sure can anyone tell me if a A motherboard is the same as the M motherboard Maybe someone who works with these day in day out hopefully will know Just don t want to buy and A if it s not compatible with M case and fittings
Relevancy 63.64%

Hi Packages; the Protection Worth Are Total Cost? System AntiVirus Packages After a recent malware event I began thinking AntiVirus Packages; Are Total System Protection Packages Worth the Cost? about a product that I thought was a little more than it actually proved to be My question here is what everyone thinks of the total system protection AV packages that companies like Symantec McAffee and AntiVirus Packages; Are Total System Protection Packages Worth the Cost? AVG sell Basically I have Norton total system protection which I religiously update almost daily installed on my PC and I let my guard down by accepting a program from a friend That was my main mistake but needless to say I paid for my lack of judgement Anyway as I installed the program I saw a quick blip from Norton saying that it was processing threats and then nothing else for the entire process of events There wasn't even a log saying that Norton processed anything If I had gotten up to get a drink I would never have even realized I got hit by something It turned out that I was infected by a nasty trojan with a keylogger etc So I guess the question is if real-time protection is really worth the cost Are there free alternatives that provide for the same thing I've seen alot of postings about Avira AntiVir and Comodo Firewall free editions along with Firefox and its add-ons and those seem like good alternates to the bloatware I see nowadays but what is everyone doing for real-time protection Are you even concerned about real-time protection Are items like SpyBot Tea Timer just as good or better I don't mind paying money for quot good quot protection but it should be quot good quot protection Any thoughts good bad or ugly are appreciated

A:AntiVirus Packages; Are Total System Protection Packages Worth the Cost?

I am very happy with ZoneAlarm. I do not use their full suite, just the Antivirus that comes with the firewall, which includes an operating system firewall. I did not mind paying the 30 bucks for the program and I do not mind paying the 20 bucks to renew it each year. I have used for many years and I have no desire to switch, not even to the free products many around seem to like a lot, that is how happy I am with it.

While I won't be without real time antivirus protection or an outbound firewall, ZoneAlarm is the only real time protection I use and it won't let me install anything it perceives as a threat. I do not like or use Spybots Tea Timer but I do use Spybot to immunize my system, along with SpywareBlaster. I use Malwarebytes and SuperAntiSpyware to run the occasional scan for malware/spyware;-are-total-system-protection-packages-worth-the-cost/
Relevancy 63.21%

I know it s been posted a Needed Price + 7-Series Advice v. in 8-Series: Performance s load of times but I figured I d go ahead and get something straightforward- all the other posts have been in jungle English and haven t included the proviso I m looking for Anyways my situation is that I bought my X GT from Newegg around Christmastime as a present to my ainsel ownself for those not familiar I ve been getting kind of disappointed in it Price v. Performance in 7-Series + 8-Series: Advice Needed recently It underperforms and often crashes on STALKER Shadow of Chernobyl and some more modern games akin to it It also runs hot as Hades I m in the market for a new card I d like to go DX but the late-production DX s series seem to outperform a lot of the more affordable DX offerings series especially at higher resolutions Price v. Performance in 7-Series + 8-Series: Advice Needed due to the -to- bit difference I could splurge and go for an I suppose but it would be a hit to the wallet and I d have to postpone cough quot Aruban Getaway quot So I don t want to pass up on the new line of DX -only Games for Windows Age of Conan Crysis etc that have been hyped to all hell just because I stuck with price and performance instead of currency and novelty I need some help deciding Then again I could always wait until DX becomes the vogue and buy a cheaper but better card then nbsp

A:Price v. Performance in 7-Series + 8-Series: Advice Needed

Keep what you got and see what's comming next. I have a 8600GT as a stopgap until something better comes out. There has been talk of a Nvidia 256bit card to fill the gap between the 8600's and 8800's. I can't fit a 8800 in my case, if I could I would just get the 8800GTS 320mb now. If I were you, wait for the game to upgrade instead of upgrading and waiting for the game. Your X1900GT is no slouch either.
Relevancy 62.78%

Dear All,

I want to buy a TECRA Z50-C-10M notebook, product code PT571E-01E00DIT (italian version) with FHD lcd screen.

I wonder if all TECRA of TECRA Z50-C-10M series have got IPS screens as shown at link:

In fact, regarding Z50-C-10M models, I can see only a 01E01HIT version; which differences with 01E00DIT version?

Some differences in screen typology?

Thank you.
Relevancy 61.49%

How the hell do you access the BOOT Menu on the Tecra R Series?

And why isn't this documented in the Operating Manual (Toshiba)?


A:BOOT Menu Access Tecra R Series


As far as I know boot menu is accessible if you press F12 at start-up.
Choose bootable device using up and down arrows and confirm with ENTER.

Check it out.
Relevancy 61.49%

My keyboard is locked on my other Tecra R serie computer,
I can't access to "?" only to 2 and so forth on the upper keyboard.

I didn't find what I did wrong or how to correct it with the keyboard or with windows 7...

Any idea what I should do ?


A:How to unlock the keyboard line on my Tecra R series


I think you enabled accidentally the Num Lock
Num Lock key is used to convert part of the main keyboard to act as a numeric keypad rather than letters.

Usually you can find the info in your user manual how to enable/disable Num Lock
In my case I have to press Fn + F11 (in some cases FN + F12) to get it enabled.
Relevancy 61.06%

Is there a X2 210 Driver/BIOS Pack for SCCM/MDT? All I've been able to find is individual driver collections somw of which like the BISO need to run the installer.
Relevancy 60.63%


I have a Tecra P5 and use an Express Port Replicator PA3508A-1PRP to hook up to external monitors, power etc.

I'm looking at a laptop upgrade and was wondering whether any of the R series machines would be compatible with this docking station?



A:Tecra Rxxx Series compatibility with docking station?


Some of the Toshiba Tecra R830, R840 and R850 series are equipped with an docking connector.

But the notebook can be used with Toshiba Hi-Speed Port replicator II.

You should not attempt to use any other Port Replicators
Relevancy 60.63%

Dear All, I am trying to import the network driver of EliteDesk 800 G2 to our SCCM . the driver should be intel I219 LM but it shows in sccm after the importing as  Intel I217-lm  so when i PXE the machine it reach to the networking section  and fail to continue the PXE . Please note that i use  winpe 3 , windows 7 x64 enterprise , latest drive from both Intel and HP site
Relevancy 60.2%

I have a set of HP Z Workstations with E - -V Xeon Cpu's SSD boot drives and varying sizes of memory from - GB Mghz DDR ECC We use Windows Enterprise for these machines with Hyper-V enabled We get regular driver failures from the sets of USB controllers on the machines Mainly and issue for the KB amp Mouse that can only be resolved with a full power down not restart and a power up This happens at least once every - days per machine I had gone through the HP support but Chipset fail Family causes USB Series/C200 Series Enhanced Hyper-V Controller driver Intel(R) to Host they have advised this isn't an issue on their side and I had agreed all along I was just hoping to get some traction by notifying them Anyway after a lengthy trouble shooting session we found that once Hyper-V was enabled the fault arose As it was an Intel chip they I asked them They advised that on Windows the drivers are supplied via windows update and that it was not their issue So how can I get this resolved Not through Hyper-V causes Intel(R) Series/C200 Series Chipset Family USB Enhanced Host Controller driver to fail HP or Intel surely through MS Maybe not Disabling Hyper-V is not desired as I the teams with these PC's are developers and require local visualization Also we have templates ready for Hyper-V I don't really want to remove Hyper-V and use Virtual box or VMWare workstation but I am at wits end with the fault and lack Hyper-V causes Intel(R) Series/C200 Series Chipset Family USB Enhanced Host Controller driver to fail of help from the vendors Please help

A:Hyper-V causes Intel(R) Series/C200 Series Chipset Family USB Enhanced Host Controller driver to fail

I have found a work around for this fault with the USB failure - ENSURE YOU POWER  THE MACHINE OFF - DO NOT RESTART.
Its almost like the restart doesn't initialise the device correct, thus causing a failure.
Relevancy 59.77%

Greetings, we received our first charges of Z440 workstations last week. We immediately downloaded the HP Z440 driverpack from and imported those into our System Center Configuration Manager 2012 R2. Of course we did use the Win 8.1 drivers to inject into our boot image and wie normally imported the Windows 7 drivers for the Windows 7 deployment.Well, unfortunately SCCM WinPE5 does not show any drives installed, even with the correct drivers installed. We even tried to import  the WinPE 5 driver pack and the drivers from SoftPaq download manager, but none of those seemed to work. Is there any known issues with Z440s drivers and SCCM? Please help me out on this, it's pretty urgent. Thank you & kind regards

A:Driver issues with HP Z440 and SCCM 2012 R2?

We were able to create a workaround with setting all RAID settings (including those of the eSATA ports) to AHCI. So now we see the drive. Still, with RAID mode we don't get any drives even with the correct drivers imported.
Relevancy 59.77%

Hello, I am downloading the drivers for the T460s for OS:-Win8.1-Win7x32-Win7x64 and I could not help but notice that the package was build in January... by now most of the drivers need updates.When talking to my peers I was told to NOT use the Lan driver in the package and to import the single one as there are issues with it. My question is: WHEN are the SCCM packages going to be updated? I would understand if this was a T430 or even a T440s.... but a new model....  Please advice.
Relevancy 59.77%

After deploying Windows 7 x64 via SCCM 2012 and injecting the drivers from the HP driver pack for 840 G3 Win 7 x64, I get a 0x0000007E. PC doesn't provide any specific driver that is failing, so disabling drivers in the priver package is mostly pick and guess. Any tips / comments from HP or the community?
Relevancy 59.77%

Hi all.

I've just received a shiny Z30-B (PT251A-008002) which will - if I can get this working - become the new workhorse for the work fleet.
Nice machine.

My only hurdle so far, is the very first one, getting it to boot into WinPE so I can apply a Task Sequence, and build it from SCCM.
I've found the correct LAN driver on the Intel website and applied it to the boot image, but it doesn't work.
I require the WinPE drivers.

The Intel package does contain "WinPE" drivers, but they don't actually seem to apply to my model laptop (if I look in the .inf file), and do not load, I tried them anyway.

If there was an SCCM driver package for this laptop, it would be awesome.
Failing that, just the LAN driver for WinPE would be perfect.

Appreciate any help or advice.


A:Portege Z30-B - WinPE LAN driver for SCCM build

I have downloaded these versions (all available from of the Intel I218-LM Windows 7 32bit driver (e1d6232.inf) and none of them have worked - so I must be looking in the wrong direction...

Relevancy 59.34%

Hi Buddies

I am having a Tecra R840-13V, Part No: PT429E-01Q01UAR, Purchased at Oman and i'm currently living at Qatar. I am using this laptop since 2010 and i need experts advise on Hard Disk upgrade. The default HDD capacity is 500GB and i planning to upgrade to 3TB and planning to get genuine Toshiba HDDs. The issue i am facing i could not figure out which model of Toshiba HDD will perfectly suits for my laptop. Kindly advise which model of HDD i can go for my Tecra. Thanks in advance.
Relevancy 59.34%

Hello nbsp I am unable to deploy the new ThinkPad P s model via our SCCM R - It nbsp fails loading our x boot image I assume its a driver issue) pxe - (Driver SCCM P50s ThinkPad boot related issues nbsp So I downloaded the WinPE -bit driver from the link below - But when I try to import the drivers into SCCM it fails with Unhandled exception See the ThinkPad P50s - SCCM pxe boot (Driver issue) full detail log at the bottom of this post nbsp Anyone who can point me to a working bit PXE driver for these P s becouse the one below doesnt seem to nbsp https support lenovo com dk da documents sccm-index lenovoid action uilogin amp lenovoid realm support nbsp ERROR Details nbsp See the end of this message for details on invokingjust-in-time JIT debugging instead of this dialog box Exception Text System ArgumentOutOfRangeException startIndex cannot be larger than length of string Parameter name startIndexat System String InternalSubStringWithChecks Int startIndex Int length Boolean fAlwaysCopy at Microsoft ConfigurationManagement AdminConsole Driver DriverDetailsPageControl PopulateData at Microsoft ConfigurationManagement AdminConsole Driver DriverDetailsPageControl OnActivated at Microsoft ConfigurationManagement AdminConsole SmsWizardPage OnActivated at Microsoft ConfigurationManagement AdminConsole WizardFramework WizardPage Activate at Microsoft ConfigurationManagement AdminConsole WizardFramework WizardForm OnNext at Microsoft ConfigurationManagement AdminConsole Driver ImportDriverWizardForm OnNext at Microsoft ConfigurationManagement AdminConsole WizardFramework WizardForm OnNextClicked Object sender EventArgs e at Microsoft ConfigurationManagement AdminConsole WizardFramework NavigationButtonBar OnNext Object sender EventArgs e at System Windows Forms Control OnClick EventArgs e at System Windows Forms Button OnClick EventArgs e at System Windows Forms Button OnMouseUp MouseEventArgs mevent at System Windows Forms Control WmMouseUp Message amp m MouseButtons button Int clicks at System Windows Forms Control WndProc Message amp m at System Windows Forms ButtonBase WndProc Message amp m at System Windows Forms Button WndProc Message amp m at System Windows Forms Control ControlNativeWindow OnMessage Message amp m at System Windows Forms Control ControlNativeWindow WndProc Message amp m at System Windows Forms NativeWindow Callback IntPtr hWnd Int msg IntPtr wparam IntPtr lparam Loaded Assemblies mscorlibAssembly Version Win Version built by FX RTMGDRCodeBase file C Windows Microsoft NET Framework v mscorlib dll----------------------------------------Microsoft ConfigurationManagementAssembly Version Win Version CodeBase file E Microsoft Configuration Manager AdminConsole bin Microsoft ConfigurationManagement exe----------------------------------------SystemAssembly Version Win Version built by FX RTMGDRCodeBase file C Windows Microsoft Net assembly GAC MSIL System v b a c e System dll----------------------------------------System CoreAssembly Version Win Version built by FX RTMGRELCodeBase file C Windows Microsoft Net assembly GAC MSIL System Core v b a c e System Core dll----------------------------------------System Windows FormsAssembly Version Win Version built by FX RTMGDRCodeBase file C Windows Microsoft Net assembly GAC MSIL System Windows Forms v b a c e System Windows Forms dll----------------------------------------System DrawingAssembly Version Win Version built by FX RTMGRELCodeBase file C Windows Microsoft Net assembly GAC MSIL System Drawing v b f f f d a a System Drawing dll----------------------------------------Microsoft EnterpriseManagement UI ConsoleFrameworkAssembly Version Win Version CodeBase file E Microsoft Configuration Manager AdminConsole bin Microsoft EnterpriseManagement UI ConsoleFramework DLL----------------------------------------Microsoft ConfigurationManagement ManagementProviderAssembly Version Win Version CodeBase file E Microsoft Configuration Manager AdminConsole bin Microsoft ConfigurationM... Read more
Relevancy 59.34%

I use HP CIK for SCCM Version on a SCCM 1511 Primary Site for downloading drivers and creating the SCCM Driver Packs. I Use the Feature "Create and Import Driver Pack" the tool works great but I am unable to download and import the "Intel Video Driver and Control Panel" Version A9 - SP75984 .. for Windows 10 X64 - Model HP Elitebook 820 G3 in the hpclient_CreateDriverPack.log I just find 2 Error Messages: Failed the operation: importing drivers..DirectoryNotFoundException: Could not find a part of the path '//Server/Sources/Drivers/Windows10/Elitebook8x0/IDFolder the IDFolder (with a long ID Number) does not get created during driver Import.. but e.g. when i choose the previous Intel video driver (Version the driver Import works perfect. what´s wrong? kind regards Klaus
Relevancy 59.34%

I am using the Windows 7 x64 Driver CAB in SCCM 2012 to deploy drivers to the optiplex 7040.
The "Apply Driver Package"  step is failing when trying to install the drivers, i receive the below error messages

CBS - Failed to unload offline registry ntuser.dat ACCESSDENIED
Unfortunately it doesnt give me details of the driver that is failing, otherwise i could just package the driver and apply it as a package.
All other builds are deploying fine so its definitely something thats only affecting the dell model, am using a 64 bit boot image already.
anyone seen this before?
I've seen some other posts which mention to use a 64 bit boot image which i already am, and this boot image works fine on all other hardware models.

Relevancy 58.48%

Hi. Since i can't post in the enterprise solutions forum, i'll post my request here.Yoga 460 has not been out for more than a few months, and in that time, pretty much all drivers have been updated, as is normal for a new model. What annoys me is that i have to run system update on all new laptop installed by SCCM, since there has not been a new SCCM package released since the original one, that fixes several important issues. Therefore, i request that Lenovo releases a new SCCM package with all the latest updates. Thanks!
Relevancy 58.48%

When running an SCCM 2012 R2 task sequence to install Windows 10 on a Z240, the network driver is working in Windows PE during the download and apply Windows image. I'm using Auto Apply Drivers step and after it's completed, the computer restarts into the Windows 10 OS, tries to set up the devices and then the task sequence fails because there is no network driver detected that it can use. I've tried to import multiple types of network drivers from both HP and Intel with no success. I've tried to specifically apply the Z240 driver package instead of using Auto Apply Drivers with no success. I've also tried to install a Windows 8.1 image instead and it still fails at the same point. I'm confused because it works fine in PE, but not after restarting and booting into the Windows OS. Any help or suggestions would be appreciated.
Relevancy 55.04%

After installing Windows 7 x64 on my Toshiba Tecra M11 I get two unknown devices that are unable to be installed. I believe them to be the USB connections since the Hardware Ids of the unknown devices are

I have the following model ...
Part Number PTME1U-03R034A1
Bios version 2.90

Can someone please point me to where I can download the drivers for this please ?
I have tried the download drivers site for Toshiba for my model but I only get the ability to download the latest BIOs Update to 3.20 ( which doesnt work either due to permission issues ).

Is there a specific driver package I am missing ?

The australian toshiba website only seems to be showing newer versions of drivers/software since the factory preinstalled image was built. SInce I no longer have the preinstalled image where can I get the downloads for all drivers for this model ?

A:Tecra M11 - USB Drivers needed


USB drivers are part of the Microsoft Windows OS. So you cannot update and install this manually.
By the way: this unit seems to be an Toshiba Australian notebook model. I could find this here:

But it seems that not all drivers have been released for Win 7 64bit.
But don?t worry? There is a Toshiba European driver page where you could download all Win 7 64bit drivers for the Tecra M11 PTME1E series?

This European series is a same like the Australian series PTME1U.

<img src='' border='0' width='550px'/>

Regarding the missing drivers:
The internal webcam is connected to the USB controller and I think you should install also the webcam software/driver in order to get the unknown devices disappearing.
Relevancy 55.04%


I have a Tecra A7, model number PTA71A-0DU003 and I have had no success finding drivers for it on any Toshiba website.

The HDD has been replaced and I have installed a fresh copy of Windows Vista operating system, but there are a number of devices listed in Device Manager that don't currently have drivers.

Could you please supply them, or point me towards their location?

Relevancy 55.04%

I upgraded my old M2 to run Vista Business/Ultimate.
Any compatible Toshiba VAP I can use ?

I am having a slow performance presumably due to the processor clock being run at 600MHz, which is way below the M735 spec, i.e. 1.7GHz.
I am trying to see if a compatible VAP can resolve the problem.

My M2 bios has already been flashed to the latest 1.6 version and with 2G RAM installed.

Thanks in advice.

A:Tecra M2 - VAP for Vista needed


Since VAP is not notebook specific software, you could use a VAP released for other Toshiba series. You could check the latest Tecra series as well.
But to be honest I?m not sure if you could solve a slow performance issue using latest VAP? don?t see any connection there?

The Tecra M2 is a oldie and you should not wonder about slow performance using Vista.
Vista eats more resources than other early MS systems.
Relevancy 54.18%

Supports the following models of Sound Blaster X-Fi cards (except Xtreme Audio):

- Auzentech X-Fi Forte
- SB0460 / SB0462 / SB0463 / SB0464 /SB0465 /SB0466 / SB0468 / SB0469
- SB046A / SB046B / SB046C
- SB0550 / SB055A
- SB0678 / SB0679
- SB0730 / SB073A
- SB0760
- SB0772 / SB0773 / SB0775 / SB0776 / SB0779

Operating systems supported (32-bit and 64-bit editions):

- Windows XP / Server 2003
- Windows Vista / Server 2008
- Windows 7 / Server 2008 R2

Driver only

- X-Fi series driver 2.20.0000.20 (Auzentech X-Fi HomeTheater HD RC4) - Supports the DisableXRAM setting.
SB X-Fi Series / Auzen Forte driver 2.20.0001 - Ho... - Creative Labs

Mirrors: RapidShare

Works on my Xfi Gamer the driver is newer than the recent creative official / beta

A:SB X-Fi Series Driver/ Auzen Forte driver 2.20.0001 - HomeTheater HD RC4 (09/05/2009)

Quality is good!