Windows Support Forum

Tecra 8200 recognizes only one 128MB memory module

Q: Tecra 8200 recognizes only one 128MB memory module

Hi,

I have a Tecra 8200 p3 (850 i think) that currently has 2x 128MB RAM.

The laptop only registers 128MB, so I think one of the sockets may be faulty.

I understand the maximum memory the tecra 8200 will address is 512MB, but can this be in a single Dimm, or must it be in 2x256?

Thanks

Ian

Relevancy 100%
Preferred Solution: Tecra 8200 recognizes only one 128MB memory module

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Tecra 8200 recognizes only one 128MB memory module

Hi

You can use 2 x 256MB memory modules 144-Pin PC133 SODIMM or 144-Pin PC100 SODIMM

Best regards

https://forum.toshiba.eu/showthread.php?31966-Tecra-8200-recognizes-only-one-128MB-memory-module
Relevancy 92.88%

Greetings,

How many memory slots there are available? And how much memory can it handle? And what memory it uses?

Message was edited by: topini

A:What memory Tecra 8200 uses

Hi

I found this page about memory modules for Tecra 8200:
http://www.orcalogic.co.uk/asp/prodtype.asp?prodtype=5841&ft=m&st=3

It looks like the Tecra 8200 would support max. 512MB and you could use the 144-Pin PC133 SODIMM or 144-Pin PC100 SODIMM memory modules!

Hope I could help a little bit!

https://forum.toshiba.eu/showthread.php?30626-What-memory-Tecra-8200-uses
Relevancy 85.14%

Hello!

How to remove the memory module?

Get the following message and for me this means that one of the modules is broken:

Memory Error
Address = 00034000H
Read Date = 28034000H
Write Data = 00034000H

For my opinion the computer should boot again when I remove the broken memory slice?

Cheers Australia

A:Tecra R10 - How to remove memory module?

Hi

You can remove easily the memory modules.
I think the bay is placed at the bottom of the unit.
You have to remove the screw securing the bay and you will get a access to the module.

Here is a video how to do this on another notebook Satellite L500. But the procedure is not very different on Tecra R10
http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=81

Hope this helps a little bit

https://forum.toshiba.eu/showthread.php?55258-Tecra-R10-How-to-remove-memory-module
Relevancy 71.81%

I want to update this NB as I have only just got it second hand. Info on the label doesn't seem to correspond to what Tosh. are asking me. Model Number: PT8200E-05WQP-GR. P3 750Mhz. I dont know whether it is a A2 A3 A8 etc etc. Ta.

A:Tecra 8200 Identity?

The reason why you cannot find your machine is because you?re searching in the wrong section.
Your machine is a little bit older and doesn?t belongs to the new generation of toshiba notebooks. To find the drivers and the BIOS update, you will have to choose Archive in the Drivers Download section.

Here?s some short description to find your machine in the drivers section:

Go to the Drivers Download section and choose:
"Product type" -> Archive
"Family" -> Tecra-Archive
"Product series" -> Tecra 8xxx
"Model" -> Tecra 8200
"Short model number" -> PT820E

Afterwards choose the operating system where you need drivers. The BIOS update is included in the driver list.

Greets

https://forum.toshiba.eu/showthread.php?33545-Tecra-8200-Identity
Relevancy 71.81%

Greetings,

I'm in need of XP drivers for my old laptop, but the Toshiba has completely removed drivers for their old laptops. Where could I found these drivers? I honestly spend last 30min trying to search drivers from the web.

And I read that WiFi doesn't work in XP, has there been found any solution to this problem?

Thank you for your help and btw, English is not my strongest language :)

A:Need WXP drivers for my Tecra 8200

It is really amazing!!!

It is sooooooooo easy to find all this stuff and I am asking myself what you have done 30 minutes. If you have old notebook model it is LOGIC that this stuff can be placed under option *ARCHIVE*. Am I right about that?

Please go to Toshiba download page again and under *PRODUCT TYPE* choose option *ARCHIVE*.

I really hope this time you will need just a minute to find WXP drivers.

Bye and good luck!

https://forum.toshiba.eu/showthread.php?30591-Need-WXP-drivers-for-my-Tecra-8200
Relevancy 71.38%

I have just bought an old Tecra 8200 with a CD-Rom drive in its SelectBay.
I would like to change to a CD-RW/DVD-ROM combo drive.
Could anyone let me know the correct model number for this combo drive please?

Best wishes

Michael

A:Need CD-RW/DVD-ROM combo drive for Tecra 8200

How about this:

*PA3073E-1CD2*
4x CD-R, 4x CD-RW, 24x CD-ROM, 6x DVD-ROM

and it supports this medias:
CD-R (read/write), CD-RW (read,re-write), CD-ROM, DVD-ROM, DVD-R (read only), DVD-RW (read only)

Greetings

https://forum.toshiba.eu/showthread.php?31804-Need-CD-RW-DVD-ROM-combo-drive-for-Tecra-8200
Relevancy 71.38%

Okay this is probably a stupid question but I have a Tecra 8200 .
Do I have to buy something else for the wireless connection to work?

A:Tecra 8200 wireless question

Hi

This question is not stupid ;) because the Tecra 8200 was equipped optional with the internal minPCI WLan card. This could be a little bit confusing.
So in some Tecra 8200 units the WLan is already included and in some Tecra?s the minPCI WLan card must be installed firstly to use the WLan technology.

You should check your device manager if an WLan module is listed in ?Network adepter?
If it?s already listed then you don?t need an additional WLan card.
If it?s not listed, then you will have to upgrade the machine with the minPCI WLan card or with a USB WLan stick.

As far as I know the PA3070U-1MPC Wireless LAN mini-PCI card coudl be compatible with your notebook.

https://forum.toshiba.eu/showthread.php?34362-Tecra-8200-wireless-question
Relevancy 71.38%

Having installed WXP over the original 2000 I have lost most of the utilities.
Have downloaded the new BIOS and utilities etc, but cannot install the BIOS as it demands to be loaded via floppy disk and pressing F12.

*I dont have a floppy on this machine. How can I load this bios via CD, memory stick or any other way?*

A:BIOS update on Tecra 8200

there is a list of methods of how to install new bios [here|http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/faq.jsp?service=EU&FID=TRO0000000b07]

Hope this helps!

https://forum.toshiba.eu/showthread.php?32354-BIOS-update-on-Tecra-8200
Relevancy 71.38%

Hi All,

I have a Toshiba Tecra 8200 that constantly freezes up. I find that it mainly occurs when I physically move the laptop. Any suggestions?
 

A:Toshiba Tecra 8200 Freezing

When it freezes, do you have a mouse physically attached to it? If so, possibly a defective mouse. Otherwise, I'd have to think a loose wire someplace or you're creating a horrendous amount of static when you're moving. Just a few avenues to take.
 

http://www.techspot.com/community/topics/toshiba-tecra-8200-freezing.9932/
Relevancy 70.52%

I want to update BIOS to latest level v1.6 .
I don't have a selectabay FDD ,only a DVD drive.
Now it would take 3 DVD's to do this i presume .ie having to sequentially update the BIOS to the latest.,
v1.4 then 1.5v and lastly v1.6.

Does the board support booting of a USB Mem stick, or a USB FDD.
Any thoughts on the best way to do this.

Is there a utility that I could download and do it from windows..

My system is an 820E. Tecra series 8200.

Thanks.

A:Can I update my BIOS using a USB Mem stick on Tecra 8200

I doubt you cannot do this.

Toshiba page provides a trad BIOS update which can be update only using the FDD drive.

Please check this Toshiba BIOS update ?How to? document:
[How do I update the BIOS on my Toshiba Notebook and where can I get the latest BIOS for my machine?|http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/faq.jsp?z=234&service=EU&from=faq_selection&CFID=B IOS&FID=TRO0000000b07]


Regards

https://forum.toshiba.eu/showthread.php?34743-Can-I-update-my-BIOS-using-a-USB-Mem-stick-on-Tecra-8200
Relevancy 70.52%

Where can I download the drivers and manual for a TECRA 8200 (PIII 900/128/20/CD)

A:Where can I download drivers and manual for Tecra 8200

Take a look on this Toshiba European website:
http://eu.computers.toshiba-europe.com

There you will find an Support homepage which contains different links to the drivers and manuals.
Then you have to choose the *ARCHIVE* in the download form!
This unit is an oldie and therefore all manuals and drivers were moved to the ?Archive?.

Bye

https://forum.toshiba.eu/showthread.php?30807-Where-can-I-download-drivers-and-manual-for-Tecra-8200
Relevancy 70.52%

My Tecra 8200 PT820E has at some time been formatted minus the Tosh. control software. Hand book says go to Control Panel/power saving and alter screen brilliance there. That does not exist on my machine.

The problem is when on battery power the brilliance level drops to an unreadable level. Is there any other way to increase the brightness level?

Thanks.

A:LCD screen brilliance control on Tecra 8200

You can do this very easy by using FN+F7 to raise brightness level.
And I think it is supposed to be the Toshiba Power Saver where you have to look for that option.

This little utility can handle behaviour for power saving modes and there is an option how much display is darkened.

https://forum.toshiba.eu/showthread.php?34502-LCD-screen-brilliance-control-on-Tecra-8200
Relevancy 70.52%

High all
Can anyone tell me how to tell what the model I have? I am trying to download the drivers for my machine but am not sure what series / model it is.

I have the following information on the base of the machine:

TOSIBA Tecra 8200
Model No: PT820E-05WQT-E
Serial No: 61276516G ST820-0

It is a Pentium 3 machine but is it an: A / M / R / S series? Then what model do I select after that please?

Thanks.

A:Tecra 8200 - Which notebook Model number do I have?

Your Tecra is simply Tecra 8200 and there is no other model number.
Drivers you can find on Toshiba download page under http://eu.computers.toshiba-europe.com > Support & Downloads but under Product type you must choose option ARCHIVE.

Then you will find option for Tecra 8200.

Good luck!

https://forum.toshiba.eu/showthread.php?41789-Tecra-8200-Which-notebook-Model-number-do-I-have
Relevancy 70.52%

When I use my Tecra 8200 laptop with (the brand new) battery, the light goes down on the screen making it almost impossible to work with. I use windows XP. I havn?t found any settings to adjust this - anybody knows what to do?

Thankful for help!
Peter

A:Tecra 8200 screen goes black when I use the battery

Hi there,

I mean thats normal, you have a notebook which has some powersaving features. Just a question besides: had it the same behaviour before you exchanged the battery?? Or did you recently installed some new drivers/tools/software??

Otherwise I would suggest you to go to the Toshiba Drivers Download site and download the latest powersaver for your machine to adjust the screen brightness.

Just give it a try if not already did and it should work.

Cheers

https://forum.toshiba.eu/showthread.php?30463-Tecra-8200-screen-goes-black-when-I-use-the-battery
Relevancy 69.66%

I just got a 2nd HD Module . I installed a Samsung MP0603H 60 gig. HD. I assume that the jumper should be set to slave. When I installed it after updating the BIOS, it is recognized by Windows XP. It says adding new hardware and Samsung HD found. It appears in Device Manager listing but not in My Computer. I need to know where do I go from here . I think I am going to like the additional HD, but can't seem to get it to work. Any help would be appreciated. Thanks
 

Relevancy 68.37%

Tecra 8200 with Win XP professional

The cursor randomly freezes and jumps back to life after a few seconds, very occasionally I have to re-boot.
This happens both with the keyboard mouse or a remote mouse.

Hope some one can help as it's driving me mad.

Cheers
Matt

A:Cursor randomly freezes and jumps back to life on Tecra 8200 with Win XP

It could be caused by anything.

However I had this problem on my previous laptop, it was the wireless card causing it.

Try disabling it in Device Manager and see how that goes.

https://forum.toshiba.eu/showthread.php?37378-Cursor-randomly-freezes-and-jumps-back-to-life-on-Tecra-8200-with-Win-XP
Relevancy 63.21%

Hello,
i have a Tecra R840-110 model, there is also 3G module inside, i would like to install the mSata SSD in the pcie slot.
Is possible to use the mSata SSD in the pcie slot instead of 3G module?

Thank you for your help!

A:Tecra R840 installing mSata SSD in position of 3G module

I think something like this is not possible. Mainboard ports are not some kind of ?flexible ports?.
In the past Toshiba has offered second HDD upgrade in place of optical disc drive using special adapter.

https://forum.toshiba.eu/showthread.php?71341-Tecra-R840-installing-mSata-SSD-in-position-of-3G-module
Relevancy 59.77%

please help me resolve my problem with my new 128MB PRETEL Memory Stick. the RAM Drive can be detected but can not be accessed.

i tried to format it using Disk Management, but it cannot be formatted coz the stick was detected as NO MEDIA.

please please please please

i need your help the soonest possible time..

joel
 

A:Problem with my new 128MB Memory Stick

Try going back to Disk management and if the drive is recognized , change the drive letter to something in the middle of the alphabet eg "m"
Then try to Format.
I have seen windows get confused when a newly inserted drive gets a letter like " D or E" and it thinks it's a CDrom
 

http://www.techspot.com/community/topics/problem-with-my-new-128mb-memory-stick.45161/
Relevancy 59.34%

I have tried to increase the amount of memory my computer has but am running into some issues. It says I can use 1066/800/667/533/400 for which there are 4 slots each of which have a led light next to them. They light up in either green for good or red for not so good. Anyway I have a total of 3 2gb memory cards (PC5400) but I always seem to get a red light on which ever one I put in the third slot.... I want to get the maximum usage out of my pc but would like to fix this problem. Any clues?

XFX GeForce 8200 AMD SOCKET 940
Galaxy GT430 1gb GPX Card
AMD Athlon 64 X2 5800+ 3.0 ghz.
4gb (At the moment) pc-5400 2gb x2
 

A:XFX GeForce 8200 AMD socket 940 memory

As XFX has a really annoying system for hiding whatever minimal amount of info they have for this board of yours, it is hard to give you too much help.

The general specs for the GF 8200 chipset allow for easily 6 GB of RAM. If I interpret your question correctly, you are having trouble with the 3rd slot only and not the others. If so, don't use the troublesome slot and use the 4th slot. If that doesn't work either, your board is probably starting to fail, but then again, your board is probably starting to fail. It may well be time to move away from an AM2+ board to an AM3 or AM3+. You may also have to change your CPU and/or RAM but then again you may well still be able to get a compatible board such as this:

http://www.newegg.com/Product/Produ...esult=True&SrchInDesc=ddr2&Page=1&PageSize=20

Prices are not very high and will probably only be available for the next 6 months or so as all these boards have been phased out by their makers. This is the not-so-bad news. The good news is that you will be able to use all your other parts with them.
 

http://www.techspot.com/community/topics/xfx-geforce-8200-amd-socket-940-memory.173088/
Relevancy 59.34%

upgrade memory in my 8200 dell. from 512 to 1024 after upgrade i do not get any display on my computer. if I place the new 2*256 in the computer works ok, if I place the old 2*256 in the computer works ok, but if a place all the memory in the computer 4*256 no display .
 

A:new memory upgraded in a dell 8200

same kind?



phyphi11 said:



upgrade memory in my 8200 dell. from 512 to 1024 after upgrade i do not get any display on my computer. if I place the new 2*256 in the computer works ok, if I place the old 2*256 in the computer works ok, but if a place all the memory in the computer 4*256 no display .Click to expand...


Are all four sticks the same? (mfr, speed, etc.)
 

http://www.techspot.com/community/topics/new-memory-upgraded-in-a-dell-8200.42108/
Relevancy 59.34%

248 Megabytes Installed Memory

Slot 'DIMM_1' has 1024 MB
Slot 'DIMM_2' is Empty

for belarc advisor.

Dell Computer Corporation Dell DE051 2.53 gigahertz Intel Celeron
Main Circuit Board b Board: Dell Computer Corp. 0WF887
Serial Number: ..CN7082167301AE.
Bus Clock: 533 megahertz
BIOS: Dell Computer Corporation A01 01/03/2006

i had 256mb memory installed the sticker on old memory says 256mb ddr-400mhz-cl3 promos pc3200-3033-Ao

i bought a crucial 1gbb184-pin dimm 128mx64 ddr pc3200 unbuff memory chip installed it and went to bios and said 1054mb installed but when i went to system properties only said 248mb ram
 

https://forums.techguy.org/threads/bios-recognizes-memory-but-xp-doesnt.764842/
Relevancy 59.34%

i just went out and baught another 256mb chip for my computer and after installing it i booted up and went to dxdiagnostics to make sure it read right and discovered my v-card ram went down to 96 mb.but it did correctly read my ram as 512.i took the new ram out and then my v-card read at the usual 128 mb any help about how to fix it and why its doing this would be appreciated,thanks
 

Relevancy 58.91%

Dell Dimension Memory Problem Today I just received my new processor for my Dell Dimension I know it old but runs great as a media pc I upgraded from a GHz bus L processor to a GHz bus L with Hyper-Threading The new processor runs at GHz since I do not have the Dell Dimension with the bus I knew this before updating the computer However after running the Windows Experience Scoring I went from a score in memory to a score The processor went from a score The following is the build on this computer MB x 8200 Memory Dell Problem Dimension Samsung PC NS RDRAM running as duel channel Any Ideas On PCI Raid CardOn PCI Raid CardOn PCI Raid Card Determined by lowest subscore Memory RAM GB Graphics ATI Radeon X Series Gaming graphics MB Total available graphics memory Primary hard disk GB Free GB Total Windows Professional Manufacturer Dell Computer Corporation Model Dimension Total amount of system memory GB RAM System type -bit operating system Number of processor cores -bit capable No Storage Total size of hard disk s GB Disk partition C GB Free GB Total On PCI Raid Card Disk partition D GB Free GB Total On Dell Dimension 8200 Memory Problem PCI Raid Card Raid Disk partition E GB Free GB Total On PCI Raid Card Media drive F CD DVD On PCI Raid Card Media drive G CD DVD Graphics Display adapter type ATI Radeon X Series Total available graphics memory MB Dedicated graphics memory MB Dedicated system memory MB Shared system memory MB Display adapter driver version Primary monitor resolution x DirectX version DirectX or better Network Network Adapter Bluetooth Device Personal Area Network Dell Dimension 8200 Memory Problem Network Adapter Linksys WUSB N Wireless-N USB Network Adapter with Dual-Band ver

A:Dell Dimension 8200 Memory Problem

To be honest I was expecting a real problem. These numbers are really nothing something to concern yourself over.

http://www.sevenforums.com/performance-maintenance/136227-dell-dimension-8200-memory-problem.html
Relevancy 58.91%

I have HP Compaq 8200 Elite SFF fitted with 4Gb Ram type PC3-12800 and 2X2 Gb Ram type PC3-10600 and it work s fine with i5 CPU, does that mean the PC3-12800 is compatible with this model?otherwise I intend to upgrade ram shall I add more PC3-12800 or PC3-10600?I appreciate help and answer to my question. 

http://h30434.www3.hp.com/t5/Desktop-Hardware-and-Upgrade-Questions/HP-Compaq-8200-Elite-SFF-PC-memory-upgrade/td-p/5609958
Relevancy 58.91%

What is the maximum RAM this model can accept?16Gb or 32Gb?in the manual it says maximum 16Gb and in another manual it says maximum 32Gb which one is correct? Which channel is channel A and which channel is channel B?In the manual it shows Dimm1 and Dimm2 for channel B and Dimm3 and Dimm4 for channel A, but on looking at the BIOS the details are different it shows XMM1 and XMM2 for channel  A and Xmm3 and Xmm4 for channel B,which one is correct? Any help and answer is very much appreciated.

http://h30434.www3.hp.com/t5/Desktop-Hardware-and-Upgrade-Questions/HP-Compaq-8200-Elite-SFF-PC-memory-population/td-p/5640403
Relevancy 58.91%

I have a 4+yr old Dell Dimension 8200 P4/200ghz that I would like to upgrade memory on. It currently has the original Rambus memory at only 256mb. Do I have to use DRAM memory or if I toss the original Rambus memory (RAMBUS INLINE MEMORY MODULE, 128, 400M, 64X16, 4C, 40) can I use a less expensive type of memory as a replacement?

Thanks
 

A:Dell 8200 Memory Upgrade Question

RAMBUS and DRAM are not interchangable. RAMBUS is proprietary. Please read the installing ram guide in the guide forum. The only ram you can use is from DELL itself. RAMBUS is also obsolete now.
 

http://www.techspot.com/community/topics/dell-8200-memory-upgrade-question.72483/
Relevancy 58.91%

Dell Dimension Memory Problem Today I just received my new processor for my Dell Dimension I upgraded from a GHz bus L processor to a GHz bus L with Hyper-Threading The new processor runs at GHz since I do not have the Dell Dimension with the bus I knew this before updating the computer However after running the Windows Experience Scoring I went from a score in memory to a score The Problem Memory 8200 Dell Dimension processor went from a score The following is the build on this computer MB x Samsung PC NS RDRAM running as duel channel Any Ideas On PCI Raid CardOn PCI Raid CardOn PCI Raid Card Determined by lowest subscore Memory RAM GB Graphics ATI Radeon X Series Dell Dimension 8200 Memory Problem Gaming graphics MB Total available graphics memory Primary hard disk GB Free GB Total Windows Professional Manufacturer Dell Computer Corporation Model Dimension Total amount Dell Dimension 8200 Memory Problem of system memory GB RAM System type -bit operating system Number of processor cores -bit capable No Storage Total size of hard disk s GB Disk partition C GB Free GB Total On PCI Raid Card Disk partition D GB Free GB Total On PCI Raid Card Raid Disk partition E GB Free GB Total On PCI Raid Dell Dimension 8200 Memory Problem Card Media drive F CD DVD On PCI Raid Card Media drive G CD DVD Graphics Display adapter type ATI Radeon X Series Total available graphics memory MB Dedicated graphics memory MB Dedicated system memory MB Shared system memory MB Display adapter driver version Primary monitor resolution x DirectX version DirectX or better Network Network Adapter Bluetooth Device Personal Area Network Network Adapter Linksys WUSB N Wireless-N USB Network Adapter with Dual-Band ver

A:Dell Dimension 8200 Memory Problem

Welcome to Seven Forums
First off could I get you to enter your system information here

So all members have to do is clcik on My system specs in the lower left hand corner of any of your posts insted of having to go to this post.

Next coudl you download cpu-z and post a snip of what speed your memory is running at?
cpu-z CPUID - System & hardware benchmark, monitoring, reporting
Thanks. Fabe

http://www.sevenforums.com/hardware-devices/136225-dell-dimension-8200-memory-problem.html
Relevancy 58.91%

After looking on the Dell Support forums I was advised that my system:
Dell dimension 8200 uses RDRAM PC800
So I went and bought 2 x 128 (I understand RDRAM has to be in pairs)
SAMSUNG Memory 800-45

They fit in the slots fine, but when the PC boots its beeps and displays and error saying the memory is incompatible, please replace with memory 40ns or faster!

Please advise!!!

Cheers
 

A:Dell Dimension 8200 Memory Upgrade

Did you get an upgrade on the motherboard or processor?
The Dell 8200 base model might use PC800, but if you upgraded it might take some faster RAM. Check into that and post back.
 

http://www.techspot.com/community/topics/dell-dimension-8200-memory-upgrade.3996/
Relevancy 58.05%
A:128MB ATI Radeon X1300 vs 128MB NVIDIA GeForce 8300GS?

isnt the 8300 newer? Im not very familiar with ATI's system of numbering cards, they like to skip around, like a friend of mine has a 9800 pro or something, yet there are newer cards in the 1k range? I dont get that.

I used to say avoid ATI like the plague, but i feel that they have gotten better. At the same time though i would recommend the 8300, because i know for sure that it supports DX10 (as its an 8 series) but the other one i cant really say no to because i dont know what it is offhand.
 

https://forums.techguy.org/threads/128mb-ati-radeon-x1300-vs-128mb-nvidia-geforce-8300gs.621899/
Relevancy 58.05%

Anyone got any views on the two cards?
Any Views/Advice welcome
 

A:*Radeon 128mb 9800 Pro 'Vs' GeForce 128mb 6600GT* AGP Battle

GeForce 6600GT or Radeon 9800 Pro
I just had to look at the bottom of this thread in the "Similar Threads" area.
 

http://www.techspot.com/community/topics/radeon-128mb-9800-pro-vs-geforce-128mb-6600gt-agp-battle.22595/
Relevancy 58.05%

I want to upgrade my memory, I have a Dell Dimension 8200 Desktop Computer. It has 256MB PC800 RDRam presently. I want to add at least 1 GB, but am not sure what i need to buy.What memory is compatible for this?
 

Relevancy 58.05%

Can I mix single sided and double sided ram in this model? or rams has to be all either single sided or double sided? Can I populate the white slots only with identical rams. has the ram to be of same make or can be of different make but same capacity? I installed two identical ram 4GB each in the white slots, the PC booted with no problem or error, but after few uses it started to have BSOD blue screen with error MEMORY_MANAGEMENT, which was repeating, the only way to overcome this I return to my previuos installed ram,does this mean rams are faulty,or incompatible, or caused windows registry error, or had to be installed in the black slots? How can I populate 3 X 2GB rams and 1 4GB rams in this model?and will expect best performance as dual channel?Any help and information is very much appreciatedthank you 

http://h30434.www3.hp.com/t5/Desktop-Boot-and-Lockup/HP-compaq-8200-Elite-SFF-desktop-memory-configuration/td-p/5739295
Relevancy 57.62%

I have a choice between these too..they're similarly priced..which do you guys recommend?
 

Relevancy 53.75%

How much memory can i fit in a Tecra M10-1CN and should it be in two 200 Pin SO DIMM DDR2 PC2-6400 800MHz modules

A:How much memory can i fit in a Tecra M10-1CN?

Hi

The memory expand possibility depends on the chipset of the motherboard
The Tecra M10 supports the Mobile Intel(R) GM45 Express chipset? and this chipset supports max DDR2 800MHz 8GB RAM

So first of all you can use 2 x 4GB RAM modules and secondly the memory speed is limited to 800MHZ.

Even if you would use faster modules i.e. 1033Mhz the FSB would clock down the speed to 800Mhz? so it?s not worth to use faster modules than DDR2 800Mhz

https://forum.toshiba.eu/showthread.php?67426-How-much-memory-can-i-fit-in-a-Tecra-M10-1CN
Relevancy 53.75%

Hi Tech Guy,
Can you email me web URL's to buy a 1 GB Memory Module for a Dell OptiPlex GX270 with a Processor x86 Family 15 Model 2 Stepping 9 Genuiielntel ~2992 Mhz so I can upgrade my PC & OS ASAP
 

Relevancy 53.75%

what is the difference in ecc and non ecc memory sticks and does it make a difference which one you can use in a dell optiplex 200. also does it make a difference if it is 40ns or 45ns? currently i have just 256mb and want to upgrage to 512mb. so i guess i need to know what is the correct sticks to buy that work with my dell. the stick in it now is 40ns.
 

A:memory module

Most desktop don't use ECC (Error Correction Code) Memory. However, this is a link to Dell with what they have available for sale for an Optiplex GX 200 if that's what you have. It is ECC memory. I looked at crucial.com, usually a good site to do a memory search and they didn't have anything listed, but suggested you might need "proprietary" memory.

Optiplex GX200
 

https://forums.techguy.org/threads/memory-module.337721/
Relevancy 53.75%

I have an NEC memory module with the following markings on each of the two chips:4318160-70 and 9451AU600. the back of the board has the markings: P7460 and P10-04B74600.

Can someone please advise me as to the capacity of the module and whether or not it is parity.
 

https://forums.techguy.org/threads/nec-memory-module.32757/
Relevancy 53.75%

By looking at a stick of memory how can you tell how much RAM it is please?

TIA
 

A:memory module

There should be a sticker on the module giving the specifications.
 

https://forums.techguy.org/threads/memory-module.474000/
Relevancy 53.75%

Hi, i was just checking out a site that sells memory upgrades... http://www.comptick.com/cq-m266-1gb.html

I noticed that theyre selling 1 GB laptop memory for hp (it doesnt mention two 512mb sticks).
Im using a compaq m2000 laptop, is it possible to just buy a single 1GB memory stick to place into one slot or would i have to buy 2 x512mb? how many bytes can each slot hold?

thankz
 

A:1GB memory module?

The max ram for that model laptop is 1GB so the safest most reliable way to go would be to purchase 2x 512MB. read this page from 4allmemory.com
Good website for memory, I use it all the time.
 

http://www.techspot.com/community/topics/1gb-memory-module.127639/
Relevancy 53.75%

I have this laptop thats a bit old, I know it has a Pentium3 and 128mb ram. What I am trying to find out is the size,module of the ram? like if its PC100? or PC133? are there any programs out there that do this trick? thanks
 

A:memory module?

Make and model of the laptop would be useful. You can also go on sites like Kingston ,use their configurator and you will find exactly the memory you need.
 

https://forums.techguy.org/threads/memory-module.462785/
Relevancy 53.75%

My owners manual for Dell 2400 series desktop calls for a PC2700(333-MHz)DDR SDRAM (non-ECC) Memory Module

Will a Kingston 512MB PC2700DDR (KVR333/512R, KVR33350/512R) Memory Module be OK?

I'm confused can some one help?
 

Relevancy 53.75%

Dear Sirs I recently put together a system that consists of Motherboard - Soyo K VTA VIA KT chipset FSB CPU - AMD Athlon Thunderbird Mhz Memory - Micron MB PC Hard Drive - IBM GB ATA RPM OS - Windows SP Video - Gigabyte Geoforce MX MB This system has been running fine and without incident until I recently purchased an addition memory module The memory module is identified on the chips as Siemens HYB S T- B It was advertised as MB Unregistered PC I installed the memory into the next available DIMM socket onboard When I rebooted the computer several things happened The PC booted through BIOS where the memory was tested Memory Module from ......... and recognized total memory them Memory Module from ......... memory and began to load Windows and then suddenly rebooted This occured over and over After booting into BIOS setup Memory was recognized in BIOS I exited and when the machine rebooted I received a STOP error STOP error The ACPI BIOS in this system is not fully compliant with the ACPI specification x A X X XEB C X C I then removed the new memory module and the machine booted normally Can you please offer me some suggestions Thank You Kelly Rudnick email protected nbsp

A:Memory Module from .........

What happens if you put just the new module in? Any problems (could be a bad module)? If not:
Do you know if the new memory is ECC or non-ECC? What about the original memory?
Also, do you know if the original memory is also unregistered/unbuffered as opposed to registered/buffered?
If they are of different types, they may not play well together.
 

https://forums.techguy.org/threads/memory-module-from.58788/
Relevancy 53.32%

Hi All,

Have ordered some RAM to upgrade my Toshiba Tecra Z40-A, but can't for the life of me find anything online of where to insert it.

I have installed RAM previously under the keyboard (couple of clips holding it in) and on others, a small covering on the bottom, but the Z40 doesn't seem to have anywhere easily accessible.

Has anyone upgraded RAM on the Z40? Or is this a big no no, due to warranty?

Thanks,
Lance

A:Tecra Z40-A - Upgrading Memory (RAM)

Memory upgrade on this Tecra model is a bit complicated and, I think, should not be done by notebook owner. For some models Ram upgrade can be done by notebook owner and exact instructions how to do this is offered in user?s manuals document, but not for your Tecra.

For full access to RAM modules bottom cover must be removed and it can be done by service people only. If you do this alone you can cancel valid warranty.
I recommend you to contact nearest Toshiba service provider in your country and ask for help or advice.

https://forum.toshiba.eu/showthread.php?79672-Tecra-Z40-A-Upgrading-Memory-(RAM)
Relevancy 53.32%

Hi all This is my first post here Memory compatibility A11 Tecra - so Tecra A11 Memory compatibility greetings to all This problem is about memory compatibility with several Tecra A laptops I have two - a A - F and a A - F Both computers run well with a pair Tecra A11 Memory compatibility of Kingston x gb gb ram sticks Recently I have bought two separate pairs of x gb sticks - neither works - both reboot after seconds and they don't get more than seconds into memtest before rebooting The first pair - which I had bought but now returned - were Samsung x gb I don't have the model number because they are now sent back I thought they were too fast or incompatible So I bought a pair of Kingston KTD-L BS G - hoping they would run because my other Kingston sticks work even though the Toshiba specs say Again they did the crashing and rebooting after seconds What are the varibles here I can't get these specs from Toshiba and various ram sites like MrMemory or Crucial recommend different things v or v C or C R or R what kinds of chip layouts on the sticks I thought it might be bios - maybe they can't recognise gb - but I have having trouble with the Windows-based bios updater and it didn't work I am a bit perturbed now because I have now bought separate memory pairs and I really thought the Kingstons would work Any suggestions would be appreciated Please don't simply recommend that I buy memory of a Toshiba part number because I'm sure a major-brand ram will work Thanks H

https://forum.toshiba.eu/showthread.php?94797-Tecra-A11-Memory-compatibility
Relevancy 53.32%

Hi all,

I have a Toshiba A11-11G with standar memory : 4,096 (2,048 + 2,048) MB with Tecnology : DDR3 RAM (1,066 MHz)

I would like to upgrade to:
8,096 (4 + 4) MB with Tecnology : DDR3 RAM (1,333 MHz)

Could it be possible?
Did you recommend me?

Thanks and Regards
David

A:Main Memory for Tecra A11-11G

According notebook specification your notebook can be upgraded up to 8 GB. What you should do is to use tested and compatible RAM modules.
Compatible 4 GB RAM for your Tecra has part number PA3677U-1M4G.

https://forum.toshiba.eu/showthread.php?64393-Main-Memory-for-Tecra-A11-11G
Relevancy 53.32%

I have read some data that says that Windows Seven has problems with mixed sizes of memory modules. In my system I have three 2 Gig modules and one 1 Gig module. Can this cause any problems. The memory came preinstalled in my system so I assume it is of same type and manufacturer. Still trying to chase a problem with desktop heap allocation failure at boot up.

A:Memory module size

  
Quote: Originally Posted by arliedog


I have read some data that says that Windows Seven has problems with mixed sizes of memory modules. In my system I have three 2 Gig modules and one 1 Gig module. Can this cause any problems. The memory came preinstalled in my system so I assume it is of same type and manufacturer. Still trying to chase a problem with desktop heap allocation failure at boot up.


The size of the module shouldn't matter as long as they are exactly the same specs. If you think the heap problem is caused by memory download and run memtestx86 for several hours at least.

You can also check in event viewer (type event vwr in search) for log entries. Go to windows logs>application tab (and system)and look for errors (red in the left hand colum) relating to the problem. When found note the event ID and source codes and relay them to us

Let us know if you need help

Ken J+

http://www.sevenforums.com/general-discussion/41533-memory-module-size.html
Relevancy 53.32%

memory module not functional led blinks three times tried other rams still not bootingwifi f12 button blinks simultenuoslyhow to repair

http://h30434.www3.hp.com/t5/Notebook-Boot-and-Lockup/memory-module-not-functional/td-p/5612658
Relevancy 53.32%

Sorry I am dim, but I can't figure out if the memory I have will work with the mobo i have.

mobo: Asus A7V400-MX
(from the supoprt manual: supports up to 2GB unbuffered PC2700/PC2100/PC1600 non-ECC DDR SDRAM)

Memory: 1 x 512 DDR 400 PC3200 UDIMM made by elixir.

I know the 'PC' numbers don't match, but i was assured twice by the tech guy that the memory is backwards-compatible with the mobo specs.

Unfortunately I am having problems with the new mobo, which may be due to the new memory, I'm not sure!!

The full problem I'll describe if I get past this issue. Don't want to bore you with it all stright up at first.

Ben
 

A:Does this memory module fit this mobo?

Yes it should work. It will just run at most 2700 (333MHz) or slower
instead of 3200 (400MHz), depending on the CPU FSB and your settings.
 

http://www.techspot.com/community/topics/does-this-memory-module-fit-this-mobo.22285/
Relevancy 53.32%

I'm currently running my system on a puny (it seems) 512 MB of DDR SDRAM (2 sticks of 256).
However, I've just bought 1GB PC3200 DDR SDRAM 1 stick 400mhz to upgrade it & have heard a horror story from a friend that this won't work as I need to buy 2 matching sticks of the same memory for it to work.
Is this true?
 

Relevancy 53.32%

Memory Test FailedFaiure ID: 90931T 64P84A QFPK1G 407K03Product ID: A5F74AV Memory Module Hi, I am trying to figure out what is wrong with my laptop and see what I need to fiix or replace. When you try and boot it, it goes in circles trying to do the "Preparing Automatc Repair" but it always fails and says the PC did not start correctly. Upon hitting restart the process repeats. Ocassionally ading the step of diagnosing PC but nothing else happens.  I am unable to get passed the booting process. Any help or advice would be great!

A:A5F74AV Memory Module

You have a dv6t-7000 model and you have a bad memory module. This is a little fuzzy but watchable. See at 2:50 into the video how there are 2 modules. Try each module by itself in each slot and see if you can boot the machine and also run the test. That should isolate the bad memory module and all you would need to do is replace it. Will also diagnose if a slot is bad if modules work in one slot but neither works in the other slot.  Post back your fuindings and we can go from there.  https://www.youtube.com/watch?v=Xnw3lnSMXEg

http://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/A5F74AV-Memory-Module/td-p/5623274
Relevancy 53.32%

Hi I have recently purchased inspiron 5567 laptop and I think I would need to add more RAM to it.
in India I don't find anywhere on the Dell official site, an option to purchase a memory module.
So I wanted to know from where I can purchase a compatible RAM for Inspiron 5567? (do I have to look for any specific brand for memory module?)
Is it okay to purchase from a local computer store or from online store like Amazon or Flipkart?
Secondly, do I have to take my laptop to the service center to replace the module or I can replace it at my home itself?
If I replace it at my own, will it affect my laptop's warranty?

A:Upgrading Memory Module

It'll take up to 2X8G DDR4-19200 modules; yes, you can purchase the memory and install it yourself (simply requires removing the base cover).
Disconnect the battery and unplug the system before upgrading.

http://en.community.dell.com/support-forums/laptop/f/3518/t/19996261
Relevancy 53.32%

Hello Windows Vista Forums I would like to upgrade my Random Access Memory RAM I am thinking to put GB RAM cards into my machine I have a small problem though I don't know what type of memory my I should put into my machine I own a Alienware Area Here are the system specs System Manufacturer Model Number Alienware OS Vista Ultimate x CPU Area Motherboard MB-EVGA CKNF B Memory GB ElPIDA DDR PC - U-DIMM MHZ Graphics Card s NVIDIA GeForce GTS Memory Module Upgrade RAM Sound Card EAX Monitor s Displays SAMSUNG quot GAMERS CHOICE Screen Resolution Primary X Secondary X Hard Drives ST AS Model ST AS Size GB PSU CoolerMaster Case Alienware Black Head Chasis Cooling Noctua NH-U P x x mm fan x mm case fans Keyboard Alienware M Standard Keyboard Mouse Alienware RAM Memory Module Upgrade M Standard Size Mouse Internet Speed MBPS Other Info Bought in October of from Alienware If anyone RAM Memory Module Upgrade can reccomend a type of RAM for machine and where to purchase for a good RAM Memory Module Upgrade reliable price that would be fantastic All help is appreciated Thanks Regards alienware

A:RAM Memory Module Upgrade

Pretty sure you'll be good with 240 pin DDR2 modules. Best to install in pairs, so keep that in mind. While newegg isn't guaranteed to give you the best price, they've always been reliable wherever I am in the world when it comes to shipping.

Newegg.com - Computer Hardware,Memory,Desktop Memory,240-Pin DDR2 SDRAM

Those are the modules for your board sorted by rating. I personally have Mushkin brand in my tower, but I'm not partial to any brand. Check out the reviews. Maybe someone else here has the same mobo as you and can offer some first hand experience on what you should get. Good luck.

Also for future reference

http://www.crucial.com/

You can go there and find the proper ram size/timings and then use that info to do a search on newegg or your favorite shopping site.

According to them here's the ram you need (http://www.crucial.com/store/listpar...AREA-51%207500)

Package: 240-pin DIMM
Feature: DDR2 PC2-5300

http://www.vistax64.com/general-discussion/236895-ram-memory-module-upgrade.html
Relevancy 53.32%

Hi Guys,
Thought i'de upgrade my 2 half gig ddr 266 memory sticks, too
2 one gig ddr 266 memory sticks.
when i installed the sticks the system soon started rapid bleeping, and the moniter display the no video input message. I reinstalled the old memory, back to normal. Any ideas would be appreciated.
All the best.
Cos.
:chef:
 

A:Memory Module Issues

What is the make and model of the new memory?
 

http://www.techspot.com/community/topics/memory-module-issues.94232/
Relevancy 53.32%

my laptop is not starting and caplock key is blinking 3times between a pause it means it has a memory failure. I'm using original memory, tell me how to reseat my device.

http://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/where-is-memory-module-in-hp-15-ac-197-nia-notebook-how-can/td-p/5659168
Relevancy 53.32%

Helloes mates ive got the following problem thats been annoying me for the last couple days I just bought brand new computer Memory module/processor? parts and im trying to get them to work together Ive gotten to a point where motherboard displays an error quot C quot continuously this motherboard has a small led display that shows error messages Even tried resettin CMOS changing places of memory modules only using one module etc but i still can t get it to work Also the memory modules seem to generate alot of heat during that time that motherboard is stuck at C phase I haven t had the balls to keep it going for more than minutes since at that point memory modules heat build-up seems to be too much Motherboards manual says for C code that Detect memory -Auto-detection of DRAM size type and EEC -Auto-detection of L cache socket or below System Motherboard Memory module/processor? Abit AB Memory module/processor? Pro Intel LGA ATX CPU Intel Core Duo E Ghz Socket FSB MB Cache Power Nexus NX- W ATX Video card Club D GT MB GDDR PCI-E DUAL-DVI TV Memory Corsair Twin X x GB DDR Mhz kit nbsp

A:Memory module/processor?

POST error C1 indicates RAM refresh has failed.

Try the RAM in another bank or try a diff module. Check to make sure the banks are clear and free of obstructions.
 

https://forums.techguy.org/threads/memory-module-processor.599838/
Relevancy 53.32%

hi everyone wondering if anyone can help me please i have virus memory module ran malwarebytes and it has picked up two virus and says will delete on reboot but they wont go away it makes my computer bleep now and again and its definitely not running right slow and keeps messing internet pages and desktop icons in toolbar area not present as to what they were before so on well i dont want anything thats not supposed to be memory module virus in there you know what i mean i ran avg and that has picked them up but still when i run malware it still finds the same two trojans and in the log file this is what it says globalroot systemroot system hjgruixjetaspb dll Trojan TDSS - gt Delete on reboot the second one is globalroot systemroot system hjgruixjetaspb dll Trojan TDSS - gt Quarantined and deleted successfully but like i say avg has done full scan and then malware keeps finding them and theyre still there anyone help please

A:memory module virus

Hello and welcome to Bleeping Computer.Please subscribe to your topic so that you will be notified as soon as I post a reply, instead of you having to check the topic all of the time. This will allow you to get an email notification when I reply.To subscribe, go to your topic, and at the top right hand corner by your first post, click the Options button and then click Track this topic. The bullet the immediate notification bubble. Then press submit.I am sorry to be the bearer of bad news but: One or more of the identified infections is a backdoor trojan. This allows hackers to remotely control your computer, steal critical system information and download and execute files.I would counsel you to disconnect this PC from the Internet immediately. If you do any banking or other financial transactions on the PC or if it should contain any other sensitive information, please get to a known clean computer and change all passwords where applicable, and it would be wise to contact those same financial institutions to apprise them of your situation.Though the trojan has been identified and can be killed, because of it's backdoor functionality, your PC is very likely compromised and there is no way to be sure your computer can ever again be trusted. Many experts in the security community believe that once infected with this type of trojan, the best course of action would be a reformat and reinstall of the OS. Please read these for more information:How Do I Handle Possible Identity Theft, Internet Fraud, and CC Fraud?When Should I Format, How Should I ReinstallWe can still clean this machine but I can't guarantee that it will be 100% secure afterwards. Let me know what you decide to do.

http://www.bleepingcomputer.com/forums/t/244106/memory-module-virus/
Relevancy 53.32%

i just installed a Kingston 64MB PC100 in the next slot to the one already holding a 64MB PC100...... restarted...... no monitor..... black....... took the emodule out again... rebooted....... everything back to normal.... what is going on? Did I miss something? What else do you have to do besides insert the memory into the slot and make sure it's seated and the claps are closed? The Ram is new.
 

Relevancy 53.32%

Hey there,
I checked to c what memory would b suitable for my laptop ( HP Compaq nx6110 ), and it seems i need DDR PC2700..
I was wondering if it matters if i use PC2700,2100 or some other ...
Does anyone know if my system would function with any of the other PC speeds?

Greetz,

Pendejo
 

A:Memory Module question

Usually, faster speeds are OK (it will just run at the motherboard speed or the speed of any other RAM module also installed, whichever is the slower)

But if you install slower RAM (2100) then all RAM, including any original module that may be faster will run at the slower speed.

I have not experienced issues using faster RAM, but very rarely timing issues may arise and it will fail to work. But it's rare.
 

https://forums.techguy.org/threads/memory-module-question.587265/
Relevancy 53.32%

When I checked my computer screen this morning it was stuck on Reset 2%. After shutting down, my system will not start, just displays hp with very slow blink. I was able to run a system check and received a failure ID: RGFX3F-78387E-QFFV61-402G03. MEMORY MODULE FAILURE. Oh, what to do, can anyone help?

http://h30434.www3.hp.com/t5/Desktop-Boot-and-Lockup/Memory-Module-Failure-ID/td-p/5739359
Relevancy 53.32%

I went to the Gateway site and found they recommend the following memory upgrade.

Infineon 512 MB PC2-4200 533 MHz Dual-Channel DDR2 SDRAM

When I place this in the search engine for Newegg, it comes up with nothing. I want to add 1 GB of memory. My computer is a Gateway GT5220.

According to the site I have 4 memory slots, 2 free (512+512+0+0)

With the information above, can you tell me what I need to look for online to order the correct memory for my computer?
Thanks
Peg
 

A:Solved: What memory module do I need

Here you go http://www.newegg.com/Product/Produ...080+1052408147+1052308476&name=1GB+(2+x+512MB)

Kingston, Corsair and Crucial are all good brands.
 

https://forums.techguy.org/threads/solved-what-memory-module-do-i-need.640883/
Relevancy 53.32%

Hello I am trying to reformat a friends computer It is a real mess so I do not infected module Memory want to clean it out But when I try to run the xp-setup it gives me a Memory module infected bsod with different messages all including setupdd sys I can boot normally setup loads files I am Memory module infected asked what I want to do press enter to setup accept license agreement When it asks me where I want to set up windwos partitions etc it show unknown devices with unknown size no harddisk no partitions after that whatever I do a bsod I googled this up and it seems to have to do with bad ram My computer shows all disks and partitions without problems so I figure it is not a hardware problem but malware preventing me from formatting re-installing windows xp The problem is that all works fine ram test is fine I ran several antimalware tools and mbam gave me one time not the first scan an infected memory module with a win trojan It said delete on reboot I rebooted and reran the scan and now it says the same Sorry I did not include the log but I am afraid to use my usb-stick to copy the log after what I was on that PC I became a little paranoid Malwarebytes run in normal mode quick scan reports memory module infecten with trojan downloader c wiindows system wmimgr dll and the file c windows system wmimgr dll When I run the scan in safemode it does not detect a thing I appreciate any help

A:Memory module infected

In time I also ran dr. Web, some 2000 infected files with win32.hllp.neshta and win32.sector.204800, file infectors, very nasty, but apparently cured. I ran windows memory test, no errors found. I ran also checkdisk, inclusive surface scan and it found some problems (as a result of file intection?). The problem still remains, I start windows setup, it still does not recognize any partitioned/unpartitioned space (I checked in my computer, 50 Gb partitioned and 100 Gb unpartitioned) and after any choice I make there (create, delete, setup) a bsod.

http://www.bleepingcomputer.com/forums/t/207721/memory-module-infected/
Relevancy 52.89%

I'm working on a Tecra 8100 laptop for a friend. Machine doesn't seem to recognize memory installed in Slot B at all. Is there a trick in the BIOS to force it to rescan or am I simply looking at a broken slot? It looks ok visually and the clips seem sound .....

A:Tecra 8100 not seeing all installed memory

You cannot force anything. Either it works or not.
Try to start notebook with RAM placed in slot B only.

Anyway, if you use compatible RAMs and if this was worked before I believe slot B is defective.

https://forum.toshiba.eu/showthread.php?46073-Tecra-8100-not-seeing-all-installed-memory
Relevancy 52.89%

Hello,

Can i install 16GB Ram in my Toshiba Tecra R950-104?

Currently i have 8GB and i would like to replace the existing 2x4GB with 2x8GB.

Best regards,

LRP

A:Tecra R950-104 - Memory Expansion

Hello

According notebook specification your Tecra can be upgraded up to 32GB and you can use 4 X 8GB RAM modules.
Compatible 8 GB RAM modules have part number PA5037U-1M8G.

https://forum.toshiba.eu/showthread.php?77660-Tecra-R950-104-Memory-Expansion
Relevancy 52.89%

Hello everyone A few weeks ago I pushed the button to start my PC It started with its usual Memory or Module System Board? routine but then stopped booting up and just started beeping at me After several attempts at forcing it to shut down then starting it again only to have it beep at me I just left it off and used the laptop to do some research about the beeping Seems it had to do with a memory problem which I managed to locate by removing the memory modules one at a time and replacing them in the same location they came from I managed to Memory Module or System Board? isolate one module that when installed caused the machine to beep and boot no further and when removed the machine booted up o k although it was a bit sluggish and acted like it wasn't to sure about what it was supposed to do with itself It just so happened that it was in an end socket and when I removed a Memory Module or System Board? module from the opposite end and placed it in the suspect socket the beeping started again so I put that module back in it's place at the other end and left the other socket empty I'm actually using the PC in question to make this post it seems to run satisfactorily without the one module in place but at times seems to loose its bearings Sorry about running on my question is quot Is the the memory module the problem or is it the socket that the memory module plugs into the problem and what is the solution either way On this particular machine a H P a n Media Center desktop I can install up to -gig modules I'm using the MB modules it came with and have added -gig modules I'd like to fill it with Gigabits of memory but I'm just not sure what to do just yet Any help would be appreciated and as always Thank You for Your Response D J L

A:Memory Module or System Board?

Hello,

Since the beeping starts when using a known good module in the "suspect" slot it

would seem to indicate a problem with the slot.

You can try testing using one working module in all slots to make sure that the issue is the slot.

If the slot is determined to be defective the board would have to be replaced.

This can be an issue with OEM unless the board is replaced with the same board.

http://www.techsupportforum.com/forums/f10/memory-module-or-system-board-692800.html
Relevancy 52.89%

have CQ60-101AU laptop. I'd like to buy Corsair Memory ? 2GB DDR2 SODIMM Memory (VS2GSDS800D2). Is it compatible with my laptop?
 

A:CQ60 memory module (RAM) compatibility

http://www.crucial.com/upgrade/compatible-memory-for/HP+-+Compaq/Presario+CQ60-101AU/list.html
 

http://www.techspot.com/community/topics/cq60-memory-module-ram-compatibility.165159/
Relevancy 52.89%

Hello I have a Dell Studio laptop Runs Vista Bought in A month or more ago the battery stopped working I haven t replaced it yet because It went from working to not working very abruptly and I m not sure that s how batteries die Checking online I read it might be my BIOS I know someone who replaced her battery and it only worked for a week or so So her computer must have another issue going on maybe mine does too The last weeks the laptop has been freezing at random times When it s not freezing it s running great I run virus and malware checks often Paid Avast free Malwarebytes ADWcleaner CCleaner and I ran Windows Repair All in One I ran a diagnostic or memory Battery, module? BIOS test Battery, BIOS or memory module? at Dell it found a critical hardware failure--my memory module isn t working properly and should be replaced My System Info says that my -- RAM is GB Total physical Battery, BIOS or memory module? memory - GB Available physical memory - Total virtual memory - GB Available virtual memory - GB Question-could this memory module issue cause the battery issue and or the random freezing I also attempted to update my BIOS at Dell which was a recommended update It wouldn t allow me to complete the update because there was no battery Any advice would be welcome Thanks marber

A:Battery, BIOS or memory module?

Hello - Yes batteries can die abruptly.. normally you would see a decrease in how long it stays charged and then it would simply fail.  But it could be yours just decided to die.  Also your computer's freezing can be attributed to bad memory and if their memory tester found a problem you may indeed have failing memory, but I would try replacing the battery first ( just in case somehow the lack of battery is affecting the memory circuit. (unlikely but possible).

http://www.bleepingcomputer.com/forums/t/584378/battery-bios-or-memory-module/
Relevancy 52.03%

My Tecra R840 will not recognize USB Memory sticks. USB works fine with USB hard drives and USB wireless mouse. Help! Any ideas? Many thanks

A:USB Memory Stick not recognized on Tecra R840

Have you tested t with different USB sticks and connected to different USB ports?

https://forum.toshiba.eu/showthread.php?70986-USB-Memory-Stick-not-recognized-on-Tecra-R840
Relevancy 52.03%

Hello,
I've posted this already but I was wondering if there was anyone else had an opinion on this.
I have a Dell Dimension 4550 which currently has 512mb of RAM on board.
I want to add another 512 module.
The Owners Manual states that I should remove the AGP CARD before adding a new module. It doesn't say that I should replace it when the new memory is inserted.
Can anyone tell me what is the function of the AGP card and if it is necessary to remove it before adding the new memory module?
Thanks.
Cobh Rambler.
 

A:Is it necessary to remove AGP CARD before adding memory module?

The AGP card would be your video card, you'd definitely want to put that back in or your computer won't work. Normally you don't remove the video card to install more memory.

The only reason I see for doing that, since its not a normal procedure, is that the card may be in the way of the latches on the side of the memory slots.
 

https://forums.techguy.org/threads/is-it-necessary-to-remove-agp-card-before-adding-memory-module.670068/
Relevancy 52.03%

Hello,
I have a Dell Dimension 4550 which currently has 512mb of RAM on board.
I want to add another 512 module.
The Owners Manual states that I should remove the AGP CARD before adding a new module. It doesn't say that I should replace it when the new memory is inserted.
Can anyone tell me what is the function of the AGP card and if it is necessary to remove it before adding the new memory module?
Thanks.
Cobh Rambler.
 

A:Is it necessary to remove AGP CARD before adding memory module?

There is no reason to remove an AGP card if you are adding more memory. Unless the AGP card physically blocks the RAM slot (not allowing you to put the RAM in), you need not worry about the AGP card.
 

https://forums.techguy.org/threads/is-it-necessary-to-remove-agp-card-before-adding-memory-module.669262/
Relevancy 52.03%

Hello members, this is my first day as a member and i got a problem.
I have a ASROCK K7VT2 motherboard with a Athlon 2000 cpu and 256 mb of 266ddr ram, but i have decided to upgrade so i have lobbed the 256 mb of ram out and replaced it with a single stick of 1gb of 266 ddr ram.
Noweverything works and it is faster BUT its only showing as 512mb of ram, the BIOS is fully updated and i have tryed the ram in the second slot to no avail. Have looked in the manual and the board says it takes 2gb of ram and it has 2 slots so 1+1 = 2 YE only this board dont wanna play i have tryed emailing asrock but go no reply so HHHEEELLLPPP can anyone help me please

dave
 

A:Asrock K7VT2 memory module not recognized!!! HELP

this will definitely not solve your problem, but please read the contents of this link http://forums.techguy.org/t337978.html

it says how much asrock sux. sorry man.

by the way

Hello and Welcome to Techspot
 

http://www.techspot.com/community/topics/asrock-k7vt2-memory-module-not-recognized-help.23280/
Relevancy 52.03%

This is supposedly what happened to my computer. Is there some way to prevent this or find out early enough to prevent drive erasure?
 

Relevancy 52.03%

I get this message whenever I log on; try to run regedit or msconfig. I'm frustrated trying to find out what the problem is...can you help???

Each time the @ # is different...i.e., ". . . in module kernel32 at 5443:91271892" these numbers change each login.

I can't see what is running on startup because this message occurs and never goes into msconfig.

HELP!!
 

Relevancy 52.03%

Hi,

I've just bought a Toshiba NB 510-10D and I can't find where do I have to change the RAM memory,

Can anyone help me?

Thanks!

A:Replace the memory RAM module of TOSHIBA NB510

Hi

I found very nice YouTube movie How to replace the RAM for Toshiba NB500, NB520, NB550D Series
http://www.youtube.com/watch?v=6mnQQbladnA

Check this.
The plastic cover at the bottom of the unit needs to be removed? there you will see the HDD and the memory modules. Spread out the two memory lock latches so that the memory module pops up. Pull the memory module up and out at an angle, using care to avoid touching the connectors. Remove the memory module.

That?s all.

https://forum.toshiba.eu/showthread.php?66870-Replace-the-memory-RAM-module-of-TOSHIBA-NB510
Relevancy 52.03%

I know you re not Module my Solved: This System? Harm Memory Can supposed to mix memory modules but I have an extra mg module that s a different brand from the modules now in my system My mb ASUS manual says quot For dual channel configuration the total size of memory modules installed per channel must be the same for Solved: Can This Memory Module Harm my System? better performance quot which I have now w the mg modules installed Patriot It also says quot Always install modules w the same CAS latency quot My questions Could installing the mg module actually weaken performance of the quot dual channel configuration quot If it is a different CAS latency could it harm the mb or other memory modules in any way I figure if it doesn t work the system just won t boot and I ll remove the extra module But if it does boot I want to be sure no harm is done to the mb the other modules and that it won t actually degrade the dual channel performance of the other modules Thanks much Harold nbsp

Relevancy 52.03%

Hi. I done a report on my pc using EVEREST because I wanted to upgrade my RAM. It says:

[ Memory Controller ]

Memory Controller Properties:
Error Detection Method None
Error Correction None
Supported Memory Interleave 1-Way
Current Memory Interleave 4-Way
Supported Memory Speeds 70ns, 60ns
Supported Memory Types DIMM, SDRAM
Supported Memory Voltages 3.3V
Maximum Memory Module Size 256 MB
Memory Slots 2

It says maximum Memory Module Size 256MB. Does this mean I cannot put a 512MB memory module in or does it mean the most ive got in it is 256mb?
 

Relevancy 51.6%

My Tecra R850-11U has 8GB (2x 4GB) memory inside. I am running W7 professional 64bit and the machine only shows 4GB as memory.

I allready upgraded the bios, but the bios also shows 4GB. I have 2 banks of original samsung memory in it; changed one to an kingston bank but it still doesn't show more than 4GB.

How can i solve this problem?? I like full memory

A:Tecra R850-11U doesn't recognise full memory

The chipset supports 8GB RAM so you should be able to use the 8GB.
But if the BIOS does not recognize the 8GB RAM then one of the modules could be faulty or not compatible with another module.

This is only and one plausible explanation for me

https://forum.toshiba.eu/showthread.php?68090-Tecra-R850-11U-doesn-t-recognise-full-memory
Relevancy 51.6%

Hello,

I jsut installed 4GB of RAM on my Tecra A9 PTS52E; but Windows 7 tells me it can only use 2.99 GB of RAM. In order to get more out of the memory I read that I have to enable "memory remapping" in my BIOS. But where do I find that? I have BIOS version 2.10-WIN installed... If I'm not mistaken this is the most recent version for my model...?


Thanks,

Jan

A:Tecra A9 PTS52E - Enable BIOS memory remapping

If you installed 32bit Windows 7, you won't get more than 3GB due to 32bit addressing limitations.

If you have 64bit Windows 7, the 1GB is probably being used by the graphics chip (GPU) as Video RAM.

https://forum.toshiba.eu/showthread.php?64113-Tecra-A9-PTS52E-Enable-BIOS-memory-remapping
Relevancy 51.6%

Please help.
Does anyone have a *photo or physical description* on the original 128 Meg module that went in the the 3440CT.

I know the part number and specification I'm specifically trying to identify if the one in my 3440CT is a Toshiba part and therefore under the 10year guarantee. Its faulty.

Paper Label Printed with:-

* square "3d" bar code
* 128MB PC-133
* MTGA83S-86KI3
* EAE
* S/N:S36000801096
* WARRANTY VOID IF LABEL REMOVED

The chips are KTI
TSV864T4I1A

it has 4 chips on each side and is a Micro Dimm 144 pin.
Printed on board is T3-0196 REV:1.0

I hope this link works. This is one on Ebay in Poland
http://i8.ebayimg.com/01/i/000/d1/ae/cd1e_1.JPG

Thanks
Neill

Message was edited by: neill.bird

A:Portege 3440CT: What is a orginal memory module spec

Hi

Portege 3440 supports 64Mb of internal memory and this memory cannot be removed.
So only one slot is available.

As far as I know Toshiba recommends using these modules for an upgrade:

*SDRAM 64MB (PA3033U-1M06)*
*SDRAM 128MB (PA3034U-1M12)*

I think you could google for these single numbers and you should get a photo or all needed details about these modules?


Bye

https://forum.toshiba.eu/showthread.php?32351-Portege-3440CT-What-is-a-orginal-memory-module-spec
Relevancy 51.6%

Good day to all Can someone please assist me advance thanks I bought a PC module new &/or memory BSOD brand on after upgrading installing new PC with MSI mainboard N GT with - GB Kingston KVR D N G BSOD after upgrading &/or installing new memory module on brand new PC installed RAM GB GB HDD Everything works smooth until I read that I could upgrade memory up to GB max BTW my OS is Win Ultimate So I decided first to buy BSOD after upgrading &/or installing new memory module on brand new PC and install pcs- GB Kingston KVR D N G GB for a few days everything works fine as expected I shut it down one night and the following day restarting my PC it turned BLUE with messages and then on as often as every minutes or less it turns BSOD I asked my friends and told me to do a clean OS BSOD after upgrading &/or installing new memory module on brand new PC reinstallation and I did that but the problem persisted as if nothing changed So I did a memory diagnostic and It noted that possible hardware problem I did immediately changed and swap back my original pcs- GB memory and surprisingly until this thread writing it is ok My mainboard supports dual channel two slots only and I want to know how could I checked which one of the two GB memory modules is not working or is it safe to install only one GB memory to checked which of the two is working or both are not working Any immediate response is of great help thanks

A:BSOD after upgrading &/or installing new memory module on brand new PC

The Kingston Value Ram (KVR) is known to be marginal and not even work in some PC's. The regular Kingston memory is usually OK but none of the techies that I know will use or recommend the KVR.

Check the MSI (or whoever the motherboard vendor is) site for your motherboard model (you didn't list it so I can't check for your). The N430GT is your video card, not the motherboard. Most motherboard vendors list compatible memory for their motherboards. Best to use memory that has been certified for the specific motherboard.

http://www.sevenforums.com/hardware-devices/260701-bsod-after-upgrading-installing-new-memory-module-brand-new-pc.html
Relevancy 51.6%

I have the small Inspiron 3250 Desktop.  Processor information:  Intel(R) Core(TM) i5-6400 CPU @ 2.70GHz (CPU:0).  Memory type:  DDR3 (1600 MHz).
I want to add another 8gb memory module.  I have asked Dell representative 5 times about which module to order.  I have received 4 different recommendations and one "your PC can't be upgraded).  I do know that my PC has two slots for memory and is only using 1 8gb module so I know it can be upgraded.  I just don't know which module is best suited for my PC.
Any suggestions??  Thanks in advance

A:Inspiron 3250 Small Desktop Memory Module

Have you called Dell Spare Parts directly (totally separate from Dell tech support) and given them that part number?
You can look at Crucial.com. They have 2x8GB RAM for this system model for ~$94. The good thing about Crucial is they guarantee it works in whichever system they recommended it for or they take it back. Many people around this forum buy from Crucial.
But do yourself a favor. Start at Crucial's home page and work through their product finder on the left side so you know you looking at RAM for your system. Don't just rely on the link I posted, because -after all- it is your money.  
You will have to click the "Show more" button when you get to the page for your model to see the 8 GB modules.
And I guess you could sell the Hynix module on eBay etc to recover some of the cost of a new pair...

http://en.community.dell.com/support-forums/desktop/f/3514/t/19996380
Relevancy 51.6%

I Upgrade Module | 5521 | Dell Inspiron RAM Memory have a nbsp Dell Inspiron nbsp Laptop having GB RAM I am planning to add additional GB RAM So the Total RAM Dell Inspiron 5521 | RAM Upgrade | Memory Module would be GB I found the following information in Dell Specifications User Guide Memory Connectors Inspiron nbsp Two internally-accessible DDR SODIMM connectors Inspiron Two internally-accessible DDR L SODIMM connectors Capacity Up to GB Type Inspiron Dual channel DDR Inspiron Dual channel DDR L Speed Up to MHz Configurations supported nbsp GB GB GB GB and GB I found the following Dell Inspiron 5521 | RAM Upgrade | Memory Module Memory Module information by running Command on my Laptop nbsp span style color font-family arial helvetica sans-serif Total Width bits Data Dell Inspiron 5521 | RAM Upgrade | Memory Module Width bits Size MB Form Factor SODIMM Set None Locator JDIMM Bank Locator Not Specified Type DDR Type Detail Synchronous Speed MHz span br br Question Is it possible to add GB configuration in this Laptop Question Should i use DDR instead of DDR L RAM in this Laptop Question Which RAM is best supported with this Laptop Kingston or nbsp CORSAIR Vengeance Note I am using Ubuntu on this Machine

A:Dell Inspiron 5521 | RAM Upgrade | Memory Module

1. Yes, albeit at a performance penalty.  It's designed for a pair of matched modules.
2.  Either will work by itself.  Don't mix DDR3 and DDR3L though -- if you have DDR3, use that; if L, use that if you're adding a module.
3.  Crucial is hard to beat particularly given its compatibility guarantee when purchased through its memory configurator.  Anything else- ask the vendor about compatibility guarantees (or be sure you understand the possible restocking charge if a return is required).

http://en.community.dell.com/support-forums/laptop/f/3518/t/19984900
Relevancy 51.6%

Hi my name is Richard I got a pc here and we got a major problem nbsp nbsp nbsp - Memory module failed self test and failing rank was disabled slot nbsp I know this a ram motherboard problem but I don't know how to fix it nbsp My devices was di... - and Memory 203 rank test self module failing failed does not work it said LSI Raid error my keyboard mouse does not work I tried to spam f for bios but 203 - Memory module failed self test and failing rank was di... It still showed up the error message I dont wanna spend too much money on this I really need to fix this problem before I ever get in trouble I believe my ram comes with the motherboard because I don't see any ram sticks inside my pc I tried to reboot but nope it still gave me the message This really scared me I could not get any devices working I could not go to bios I dont have a clear disk to diagnose on I've seen forums thesame as this but non of them worked Please help us I will try to be active as soon as possible nbsp nbsp Any replies will be replied and nbsp Please help us and tell us the solution for this I only saw HP users have this I don't want to spend bucks for a new pc nbsp nbsp Specs nbsp PC HP Workstation x DDR Memory gbPciE Zotac Geforce GT nbsp nbsp Any further replies will be replied as fast as possible I will try to be active as soon as possible nbsp nbsp nbsp Thank you staff volunteers and members for reading this thread I've tried everything i could do to fix this nothing seems to be working nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp -Screen Guy

http://h30434.www3.hp.com/t5/Desktop-Boot-and-Lockup/203-Memory-module-failed-self-test-and-failing-rank-was/td-p/5757559
Relevancy 51.17%

Hello all I need help with some issue My system says that I have GB RAM available for applications services etc The rest graphic How card? of the can shared memory - Tecra R850 I the reduce of it between and GB RAM is shared and Tecra R850 - How can I reduce the shared memory of the graphic card? reserved for the graphic card I searched for a way to reduce it via BIOS how it normally works tried an update for the bios hopping that it would add this feature But that wasn't the case I can't understand why Toshiba doesn't allow his customers to modifity this setting I can understand to put such a setting by default but also giving an option for advanced users to modifiy this setting GB RAM are not very much and I Tecra R850 - How can I reduce the shared memory of the graphic card? often need more than that MB more RAM for sys would be really nice And bit OSs are currently not supported in our company So does anyone know a way to reduce the shared memory to e g MB My system specs Windows Pro SP bit Modell TECRA R Serialno B H Partno PT E- E KGR Thanks in advanced for your answers null

A:Tecra R850 - How can I reduce the shared memory of the graphic card?

As far as I know shared memory works automatically and notebook user cannot control it.
It is nothing new and the same principle is on all Toshiba notebooks.

Sorry but there is nothing to do about it.

https://forum.toshiba.eu/showthread.php?76404-Tecra-R850-How-can-I-reduce-the-shared-memory-of-the-graphic-card
Relevancy 51.17%

Hello, I have a dell 8250 that i am pretty happy with but have noticed that i need more ram. I have 512 now but several programs that i run suck up much of it. I have just purchased 2 new 512 modules for this thing and plan on pulling the 256 sticks out and replace them with the new ones. My question is i know i need to put rambus in matched pairs but can i have a pair of 512 and a pair of 256? any ideas? also i was thinking about wiping out my main drive for a complete clean reinstall. Is that a little overkill? opinions requested. thanks for your time.

specs:
Motherboard:
CPU Type Intel Pentium 4A, 2400 MHz (18 x 133)
Motherboard Name Dell Dimension 8250
Motherboard Chipset Intel Tehama i850(E)
System Memory 512 MB (RDRAM)
BIOS Type Phoenix (04/22/03)
Operating System Microsoft Windows XP Home Edition
OS Service Pack Service Pack 1
Internet Explorer 6.0.2800.1106 (IE 6.0 SP1)
DirectX 4.09.00.0904 (DirectX 9.0c)
 

A:Solved: Rambus Inline Memory Module, 256, 533mhz, 128x16, 8c

rrlr420 said:

Hello, I have a dell 8250 that i am pretty happy with but have noticed that i need more ram. I have 512 now but several programs that i run suck up much of it. I have just purchased 2 new 512 modules for this thing and plan on pulling the 256 sticks out and replace them with the new ones. My question is i know i need to put rambus in matched pairs but can i have a pair of 512 and a pair of 256? any ideas? also i was thinking about wiping out my main drive for a complete clean reinstall. Is that a little overkill? opinions requested. thanks for your time.

specs:
Motherboard:
CPU Type Intel Pentium 4A, 2400 MHz (18 x 133)
Motherboard Name Dell Dimension 8250
Motherboard Chipset Intel Tehama i850(E)
System Memory 512 MB (RDRAM)
BIOS Type Phoenix (04/22/03)
Operating System Microsoft Windows XP Home Edition
OS Service Pack Service Pack 1
Internet Explorer 6.0.2800.1106 (IE 6.0 SP1)
DirectX 4.09.00.0904 (DirectX 9.0c)Click to expand...

Good question--try it--I don't think it will work, but all it can do is not boot.
 

https://forums.techguy.org/threads/solved-rambus-inline-memory-module-256-533mhz-128x16-8c.394489/
Relevancy 51.17%

I boot my Hp machine, nothing shown on screen and "capslock & numlock 3 times blink"i tried hard reseting it / AC adapter and battery does not seem to be the reason of this issue. is it memory module error? how to fix it?

A:Memory module error capslock & numlock 3 times blink

@usmanm27? Try reseating the memory boards first."Just remove them and reinsert them." HP EliteBook 8530w Mobile Workstation - Remove/Replace Videos http://h20464.www2.hp.com/results.htm?SID=3781677&MEID=C773CE52-9448-4212-9A06-3FF8E456DBA7 REO

http://h30434.www3.hp.com/t5/Notebook-Boot-and-Lockup/Memory-module-error-capslock-amp-numlock-3-times-blink/td-p/5739116
Relevancy 49.88%

I have upgraded one of my old computers from MB RAM to GB by buying another PC DDR setting BIOS Rate Module of Installation DRAM Command Problem New with Memory MB module Upon booting Windows XP after the installation of RAM BSODs with various errors show up sometimes before loading to the desktop sometimes after the desktop has loaded Some of the errors include IRQL LESS THAN EQUAL error and another error that has the word Page DRAM Command Rate BIOS setting Problem with Installation of New Memory Module in it I forgot if it is Page fault or Page file I have traced this down to the BIOS Memory settings Before the upgrade I have set other settings to the optimal setting that the BIOS can allow DRAM Command Rate BIOS setting Problem with Installation of New Memory Module me by reading this guide http www techarp com freebog aspx without any problems Upon upgrading setting the DRAM Command Rate to T will prevent the BSODs before the installation of the new module this setting was set to T and my system worked fine without any BSODs I am wondering if there is another way I can get my system to work while still setting the DRAM Command Rate to T As I have seen from various websites like this one Techwarelabs com http www techwarelabs com reviews memory memory timings index shtml there is a performance increase if the DRAM Command Rate is set to T I also would like to know if the performance gain is not that significant and if it is better if I just leave it at T I am also wondering if module order matters based from closeness to the processor in performance and stability I have found out thru Everest Home Edition that the new module I bought has a slightly slower memory timing that my old one I have set my old module closer to the processor This system is Windows XP P GHZ ASUS P VP-MX motherboard my BIOS is also recently updated My motherboard contains two RAM module slots each slot has a PC DDR MB RAM - GB total nbsp

A:DRAM Command Rate BIOS setting Problem with Installation of New Memory Module

Put the slower one into Slot 1 - that ought to ensure it runs at that speed, not the faster sticks timings..

You could try resetting it to 1T if that proves stable. A slight bump in Ram Voltage probably wouldn't hurt - if your board has that Facility in the BIOS.

A quick way to test stablility is to run a 2m SuperPi - it's not foolproof, but if it passes, you know you're on the right track. If you get errors, it's still suss, and you might want to run a MemTest on each stick individually - although it's new, it may still be faulty!
 

http://www.techspot.com/community/topics/dram-command-rate-bios-setting-problem-with-installation-of-new-memory-module.90812/
Relevancy 47.3%

 Hello , Product  : HP ENVY Ultrabook 4-1046txCurrent Wifi Module : Broadcom 802.11 b/g/n I need to upgrade my wifi module to a new dual band module preferably the Intel one.http://www.intel.com/content/www/us/en/wireless-products/dual-band-wireless-ac-7260-bluetooth.htmlCould anyone confirm that whether my laptop is Whitelist or not ?  Thanks in Advance !

A:Upgrade Wifi Module to a new Dual band module

Hi, Your machine was built long way before mid 2014. The chance to change wireless card is from slim to none. Do you know the whitelist story don't you ? Regards.

http://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/Upgrade-Wifi-Module-to-a-new-Dual-band-module/td-p/5844154
Relevancy 46.01%

One for all you quot Experts quot Hey all I m new around here and I joined because I have bad computer trouble and maybe someone could identify my problem The other day I opened up my computer to put a stick of Mb DDR Ram into it and i found two Mb DDR sticks already in there So I took one of the Mb Chips out and put the Mb in mixing them you new memory module for Installing (One "Experts") all up with each other Anyways when I turned on my computer to boot it up it made a bunch of Installing new memory module (One for all you "Experts") wierd noises like beeps so I turned it off fairly fast I took out the Mb and put back in the old Mb stick Now whenever I push the button for my computer to come on It will only make a long beep pause for a second then keep making the beeps over and over again the screen does not light the LED stays orange If anyone could help anything is appreciated Thanks - Thread moved amp title edited Didou nbsp

A:Installing new memory module (One for all you "Experts")

Take out all the sticks of ram, and then out in the 128 and 512. Be sure to take all of them out first though, and they are pushed ALL the way down, it requires some force.

What I do is, line up the RAM with the slot, then just push down hard on the ram until the clips at the side automatically come up and clip the ram into place
 

http://www.techspot.com/community/topics/installing-new-memory-module-one-for-all-you-experts.14152/
Relevancy 44.72%

I possess a tecra A10 complete with Windows Vista Business installed (and backed up to an image file using Easeus Todo backup


However I also have access to a Tecra M10 which came with no operating system, although the COA sticker (product key) is likewise for a windows Vista Business.


My question is: would my Windows Vista Business back up from the A10 work on the M10 (ie would it load onto the M10 hard drive and then work properly

If anyone can advise on this matter I would be appreciative please

Best wishes
Ian

A:Can I use Tecra A10 OS disk to install OS on Tecra M10?

At first I must say that Toshiba recovery image is created for each notebook model separately and it is 100% created to work on specific model. Why?
Every notebook model has different hardware platform and all drivers, tools and utilities for certain model are part of recovery image. These recovery images are also tested.

Generally speaking if both models have identical hardware platform (hardware parts) it can be used.

https://forum.toshiba.eu/showthread.php?71852-Can-I-use-Tecra-A10-OS-disk-to-install-OS-on-Tecra-M10
Relevancy 41.71%

I ran Malwarebytes several times and always get two infections One is Trojan TDSS with the Catagory Memory Module and Items globalroot systemroot system SKYNETnpoysrwi dll The other is Trojan TDSS with the Catagory File and Items globalroot systemroot system SKYNETnpoysrwi dll I make sure they are checked Infected Memory File Trojan.TDSS Module Trojan.TDSS and with remove them restart as prompted rescan and get the same result I have repeated this process several times I tried another method from another site of getting rid of these by disabling the driver in the device manager and running quot Avenger quot to delete the driver and then I believe reinstall it It is currently still disabled and the icon has an exclamation on it I hope this helps Infected with Trojan.TDSS Memory Module and Trojan.TDSS File you Thanks DDS Ver - - - NTFSx Run by Mr Amazo at on Sun Internet Explorer Microsoft Windows XP Professional GMT - AV AVG Anti-Virus Free On-access scanning enabled Updated DDD - FF- F- E B- D D BF Running Processes C WINDOWS system svchost -k DcomLaunch svchost exe C WINDOWS System svchost exe -k netsvcs C Program Files Intel Wireless Bin EvtEng exe C Program Files Intel Wireless Bin S EvMon exe C Program Files Intel Wireless Bin WLKeeper exe svchost exe svchost exe C WINDOWS system spoolsv exe C PROGRA COMMON AOL ACS AOLacsd exe C Program Files Common Files Apple Mobile Device Support bin AppleMobileDeviceService exe C PROGRA AVG AVG avgwdsvc exe C Program Files Bonjour mDNSResponder exe C Program Files WIDCOMM Bluetooth Software bin btwdins exe C Program Files Common Files Creative Labs Shared Service CreativeLicensing exe C PROGRA AVG AVG avgrsx exe C PROGRA AVG AVG avgnsx exe C WINDOWS eHome ehRecvr exe C WINDOWS eHome ehSched exe C Program Infected with Trojan.TDSS Memory Module and Trojan.TDSS File Files Java jre bin jqs exe C Program Files Common Files Microsoft Shared VS DEBUG MDM EXE C Program Files Microsoft SQL Server MSSQL MICROSOFTSMLBIZ Binn sqlservr exe C Program Files Dell QuickSet NICCONFIGSVC exe C Program Files Intel Wireless Bin RegSrvc exe svchost exe C WINDOWS system svchost exe -k imgsvc C WINDOWS wanmpsvc exe C Program Files Canon CAL CALMAIN exe C WINDOWS system dllhost exe C WINDOWS Explorer EXE C WINDOWS ehome ehtray exe C WINDOWS system igfxpers exe C WINDOWS stsystra exe C Program Files Synaptics SynTP SynTPEnh exe C Program Files Creative SBAudigy Surround Mixer CTSysVol exe C WINDOWS system Rundll exe C Program Files Common Files InstallShield UpdateService issch exe C WINDOWS system igfxsrvc exe C Program Files Intel Wireless bin ZCfgSvc exe C Program Files Intel Wireless Bin ifrmewrk exe C WINDOWS system LVCOMSX EXE C WINDOWS eHome ehmsas exe C Program Files Logitech Video LogiTray exe C WINDOWS system dla tfswctrl exe C Program Files iTunes iTunesHelper exe C Program Files CyberLink PowerDVD DVDLauncher exe C PROGRA AVG AVG avgtray exe C Program Files Java jre bin jusched exe C Program Files Logitech Desktop Messenger Program BackWeb- exe C WINDOWS system ctfmon exe C Program Files Linksys EasyLink Advisor LinksysAgent exe C DOCUME MR BA AMA LOCALS Temp clclean C Program Files Spybot - Search amp Destroy TeaTimer exe C Program Files WIDCOMM Bluetooth Software BTTray exe C Program Files Intel Wireless Bin Dot XCfg exe C Program Files Microsoft SQL Server Tools Binn sqlmangr exe C PROGRA WIDCOMM BLUETO BTSTAC EXE C Program Files iPod bin iPodService exe C Program Files Logitech Video FxSvr exe C Program Files Internet Explorer iexplore exe C Program Files Internet Explorer iexplore exe C Program Files Internet Explorer iexplore exe C Program Files Internet Explorer iexplore exe C Documents and Settings Mr Amazo Desktop dds scr Pseudo HJT Report uStart Page hxxp www google com uSearch Page hxxp www google com uSearch Bar hxxp www google com ie uDefault Page URL www google com ig dell hl en amp client dell-usuk amp channel us uSearchMigratedDefaultURL hxxp www google com search q searchTerms amp ... Read more

A:Infected with Trojan.TDSS Memory Module and Trojan.TDSS File

Reformated drive, so no reply is neccessary. However it would be nice to know what is required for this fix. Thanks.

http://www.bleepingcomputer.com/forums/t/237303/infected-with-trojantdss-memory-module-and-trojantdss-file/