Windows Support Forum

Satellite T110-107 - Touchpad not working properly

Q: Satellite T110-107 - Touchpad not working properly

I love my Satellite T110-107 but there are issues with the TouchPad.

1). The mouse cursor doesn't move at times. With this one I can get it to move by taking both hands away from the laptop for a moment.
2). The mouse cursor suddenly 'shoots' off to the right hand of the screen.

I've tried changing the touchpad sensitivity to both the minimum and the maximum levels, i've adjusted the 'Palm' sensitivity but nothing seems to help other than by making the sensitivity low which helps a little.

I've also noticed that when the laptop is on my lap, the problem is worse than if it's on a table.

I think that it's a problem with a build up of static on the case.

Any other ideas?.

Relevancy 100%
Preferred Solution: Satellite T110-107 - Touchpad not working properly

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Satellite T110-107 - Touchpad not working properly

Hi buddy,

I use Satellite T110 for months now and really and no problem. Everything runs great and I don?t have any problems. It?s really great notebook!!!

So it must be something wrong with yours or installation.
First of all I would recommend updating the touchpad driver. You can download it on the Toshiba website:
http://eu.computers.toshiba-europe.com

After this you should test it again. Check also the touchpad settings again. There are a lot of settings to improve touchpad.

https://forum.toshiba.eu/showthread.php?55571-Satellite-T110-107-Touchpad-not-working-properly
Relevancy 94.17%

When the power button is pushed the power and wireless lights come on, the fan whirs for a moment then nothing more happens. If I take out the battery and leave it for 30 mins then it boots fine when the power button is pushed. Currently away from home, but have internet access.

Running Windows 7.

Any and all suggestions welcomed!

A:Satellite T110-107 - Reboot doesn't work properly

Hi buddy,

Since when do you notice this problem and have you changed something on hardware configuration?

It?s hard to say why it happens but fact is it must be a hardware issue? Have you installed newest BIOS version for Satellite T110? You can download it on official Toshiba website:
http://eu.computers.toshiba-europe.com > Support & Downloads > Download Drivers

But before you start the update, close all running programs (also AntiVirus and Firewall).

https://forum.toshiba.eu/showthread.php?57149-Satellite-T110-107-Reboot-doesn-t-work-properly
Relevancy 84.28%

Hi.

As the program TEMPRO was informing of a new version for the wLan driver, I uninstalled the current and installed the new one (Realtek Wireless LAN Adapter 8191SE/8192SE)

([http://aps2.toshiba-tro.de/wlan/?page=downloads])



Since then I have *no wireless detection*. I had:



* installed the previous version
* let Windows7 install automatiquily the driver

Nothing worked out. Does anyone has had this problem, or a solution?


Thank you.

null

A:After driver upgrade WLAN stops working on Satellite T110

> As the program TEMPRO was informing of a new version for the wLan driver, I uninstalled the current and installed the new one (Realtek Wireless LAN Adapter 8191SE/8192SE)

Have you tried to rollback the driver in device manager? I don't know much about your laptop, are you sure you install the righ driver?

https://forum.toshiba.eu/showthread.php?53963-After-driver-upgrade-WLAN-stops-working-on-Satellite-T110
Relevancy 72.24%

i am using hp ay008tx and have installed latest driver as recomended on hp website of SYNAPTIC TOUCHPADV1.3.. sometimes i have to click twice ot thrice to get one click.

http://h30434.www3.hp.com/t5/Notebook-Video-Display-and-Touch/touchpad-not-working-properly/td-p/5822977
Relevancy 72.24%

No idea if this is hardware or software, but I'm trying this first.

I have an Inspiron 1525 laptop running Vista. My touchpad stopped working for some random reason a couple days ago except for the buttons. It might have started working again a while ago, but I just noticed 2 hours or so again that it was working, except for 2 things: I can't do that... uhhh... dunno what it's called, where you click the two buttons together and it does what clicking the mouse wheel on a normal mouse would do... and I can't scroll. The thing on my taskbar that tells me where my finger is on the touchpad has disappeared, as well.
 

A:Touchpad not working properly

Touchpads are usually proprietary pieces of hardware that have drivers supplied by the manufacturers. Check your device manager and settings in Control Panel (it may be under the Mouse settings) to be sure everything is all right there.

You might also go to the manufacturer's web site to check on a driver, and maybe an update to it. You could always reinstall it, anyway.
 

https://forums.techguy.org/threads/touchpad-not-working-properly.851233/
Relevancy 72.24%

My hp touchpad isn't working properly. It stops after sometime and windows 8.1 is working really slow. Kindly fix this issue as soon as possible. I shall be highly grateful to you.

http://h30434.www3.hp.com/t5/Notebook-Video-Display-and-Touch/My-hp-touchpad-isn-t-working-properly/td-p/5638583
Relevancy 72.24%

OK so now if my touchpad is switched on the mouse cursor sometimes makes continuous erratic movements around the screen. Turning it off solves this problem. Is this a sign it's wearing out, or is there something I can do to stop this?

A:Touchpad not working properly

What state is your laptop on when the touchpad issue occurred? This happens on my fujitsu laptop when charger is plugged in. After a quick googling, found out that I just had to put the "brick" part of the charger to a good distance away from my laptop. Worked wonders! Issue usually happens with replacement chargers (due to voltage or ampere incompatibility).

Not sure though if this was your case.

http://www.tenforums.com/drivers-hardware/42868-touchpad-not-working-properly.html
Relevancy 72.24%

Hi i have hp i7 4712 laptop.but its touch pad is not working properly.Because when i using it some its stop for few minute and then it start working.

http://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/Touchpad-is-not-working-properly/td-p/5615965
Relevancy 72.24%

My touchpad is not working properly.I can drag my cursor using it but am unable to hold it or tap it to select something which causing several inconvenience.

http://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/Touchpad-not-working-properly/td-p/5663156
Relevancy 71.81%

I bought a Lenovo G50-80 (intel(R) Core i3-5005U, 2GHz) a few months ago. A week after buying, I noticed touchpad not working properly while charger plugged in, also it was not working while my printer?s USB cable connected. Touchpad button and finger tap working fine but, cursor hanging or moves very slow. When I unplugged the charger and printer cable touchpad working fine. But, it was not working anymore (it is also not working properly when the charger and printer?s USB cable unplugged). Usb mouse working perfect.My Laptop have installed windows 7 64bit operating system. I tried to reinstall windows 7 64bit ultimate and professional os (Not other like windows 8 or 10), I updated a latest bios and touchpad driver from Lenovo and synaptics website, But I am getting same problem.

A:Lenovo G50-80 touchpad not working properly when t...

Hi there, Nmparmar          -
 
Thank you for writing in to the Lenovo Forum - happy to have you here today.
 
Can you try to:
Make sure you use the original 65W 20V/3.25A or 90W 20V4.5A AC adapter that came with the unit.
 
Plug the AC adapter in another wall outlet in your house (preferrably another side of the house) - if this works, the original wall outlet that you used before when you got the issue may not be properly grounded.
 
Perform a power drain by:a turning the PC OFF. Remove the battery & AC adapter then hold the power button for 30secs. When done, reinsert the AC adapter and battery then boot into the BIOS by pressing F2. When inside the BIOS, press F9 to reset default settings and press F10 to save and exit.
 
Update the Touchpad Driver below:
 
Synaptics Touchpad Driver      
 
Update us how it goes.
 
 
 
 
Regards,
 
Tap that kudos button if I helped  If you find a post helpful and it answers your question, please mark it as an "Accepted Solution

https://forums.lenovo.com/t5/Lenovo-B-and-G-Series-Notebooks/Lenovo-G50-80-touchpad-not-working-properly-when-the-charger-or/td-p/3438701
Relevancy 71.81%

Hello hi im lili b any my toupad isnt working right the dang strolling up or down wont work and I cant fix it I have an hp pavilion dv4 1435dx could someone help mi find the orrect driver that could fix it
 

A:Laptop touchpad is not working properly

http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=3979336&lc=en&cc=us&dlc=en&lang=en&cc=us

You should find the drivers you need here. Click on next By the windows 7 64 bit box.
 

http://www.techspot.com/community/topics/laptop-touchpad-is-not-working-properly.194368/
Relevancy 71.81%

Brand new chromebook and the touchpad lags, or does't respond correctly (scrolling when it shouldn't, clicking the wrong area, etc.)  Is there somethig I can do to fix this?

A:chromebook CB5-311 touchpad not working properly

Factory resethttps://acer.custhelp.com/app/answers/detail/a_id/11188/~/how-do-i-recover-my-acer-chromebook%3F Replace the Chrome O/S recovery drivehttps://acer--uk.custhelp.com/app/answers/detail/a_id/27636/~/how-to-create-recovery-media-for-a-chr...

http://community.acer.com/t5/Chromebooks/chromebook-CB5-311-touchpad-not-working-properly/td-p/395936/jump-to/first-unread-message
Relevancy 71.81%

I have a HP Pavilion DM4-3099se Laptop with a Intel Core i5 dual core processer and 6GB of RAM. On this laptop is a Synaptics touchpad and uptill now it was working fine. It recently started glitching and now when i move my finger on the touchpad, the mouse moves but it repeatedly stops and then starts moving and then moves in all different directions. I went to the Synaptics website and installed the latest drivers for the touchpad and the installation was successful but the trackpad was still the same way. My external wired mouse works fine right now though. I tried restoring my system the earliest point there was on the list and still no improvement on the touchpad. Please help. Thank you.

A:SYNAPTICS TOUCHPAD NOT WORKING PROPERLY!

Thanks everyone for reading but I already fixed the problem. My computer shipped with two Operating Systems, one being windows 7 and the other being HP QuickWeb. I just booted into HP Quickweb and my trackpad was working fine and then i booted back into windows and it worked perfectly after that. I just though i would let you know and can somebody please close this topic because i dont know how to. thanks.

http://www.bleepingcomputer.com/forums/t/485995/synaptics-touchpad-not-working-properly/
Relevancy 71.81%

1. when i start my laptop, touchpad works fine but after a while it starts missbehaving. right click n left click work fine but cursor is out of control.i have checked if its driver is not updated but it is updated.i uninstalled its driver n installed it back but even then it is not working. i read somehwere if its touch screen is turned off then touchpad works fine but even if i turn touch screen off it does not work.2.i dont know about other function keys but i use function keys for brightness and volume all the time. i dont know if it was last window update or what else went wrong that these function keys are not helping anymore. These keys still make a pop up sound which means keyboard buttons are working fine.please help.

http://h30434.www3.hp.com/t5/Notebook-Video-Display-and-Touch/1-touchpad-not-working-properly-2-function-key-does-not-work/td-p/5723984
Relevancy 71.81%

My laptop touchpad is not working properly; that is I cannot scroll properly and also have problems with the sensitivity of touch. I downloaded and installed the Synaptic touchpad driver but it is still not functioning very well. Please can someone help me with a solution.
The name of my Laptop is; Compac Presario CQ50-115NR Notebook PC
Thank you.
 

A:My laptop touchpad is not working properly

Go to Start -> control panel -> Hardware and Sound.

Somewhere in there you should find adjustments for the sensitivity.

If this does not work please state your operating system for further help and try it with a USB mouse.
 

http://www.techspot.com/community/topics/my-laptop-touchpad-is-not-working-properly.163990/
Relevancy 71.81%

My scrolling up and down option of touch pad is not working what should I do...?
 

A:My laptop touchpad is not working properly

Are you referring to the the right side scroll bars on laptop touch pads that allow you to scroll up and down pages?

Try updating the driver for your touchpad and see if that helps.
 

http://www.techspot.com/community/topics/my-laptop-touchpad-is-not-working-properly.201621/
Relevancy 71.81%

Hi I have a Samsung RV laptop and I have a problem with the elan touchpad It can scroll up and down but I touchpad working Elan not properly when I click or tap on anything it doesn t do anything I am using a USB plug in mouse but I am working on an university assignment and I need the USB portal to save my work on an USB key Elan touchpad not working properly Before Christmas I had the same problem and I went into the tech support in uni and he said that I had set the left click button to right click function or something like that and he went into control panel and mouse to resolve the problem He fixed it by doing something in Mouse under Control Panel but I just can t remember what and by the way I have the setting where the elan touchpad is disabled when an USB plug in mouse is inserted I really need help today if you can I have tried to adjust the settings of the touchpad in Mouse in Control Panel but even switching the buttons does not do anything to solve the problem Sometimes when I start the laptop the touchpad works fine but an indication that is going wrong is when I am scrolling the screen with the touchpad the pop up that appears on screen when one right click appears by itself and keeps appearing whenever on the screen I move the touchpad mouse After that the tap to click as well as left and right click buttons fail to work at all and I do not know if this is a software problem or is it a hardware problem as I said I encountered this problem already and now it s returned Thanks nbsp

https://forums.techguy.org/threads/elan-touchpad-not-working-properly.1117590/
Relevancy 71.81%

I upgraded windows 10 about 2 days ago and from that my elan touchpad starts to not working after some minutes of usage, it always detects an unexisting tap.
I tried to uninstall and reinstall the driver but it seems to not working.
 
Mod's Edit: System model added to the front of Subject line to improve visibility / clarity.
 

A:G50-80 - Elan touchpad not working properly after ...

Good day and welcome to the community.Please provide more information about your system model, otherwise it may be difficult for the community to assist you. We will also be able to confirm that your post is in the proper forum.Regards.
 
Mod's Edit: System model added to the front of Subject line to improve visibility / clarity.
 

https://forums.lenovo.com/t5/Lenovo-B-and-G-Series-Notebooks/G50-80-Elan-touchpad-not-working-properly-after-win10-upgrade/td-p/3393903
Relevancy 70.95%

I upgraded windows 10 about 2 days ago and from that my elan touchpad starts to not working after some minutes of usage, it always detects an unexisting tap.I tried to uninstall and reinstall the driver but it seems to not working.

https://forums.lenovo.com/t5/Lenovo-B-and-G-Series-Notebooks/Elan-touchpad-not-working-properly-after-win10-upgrade/td-p/3393903
Relevancy 70.95%

I just reformatted the HDD on my girlfriends laptop and now the touchpad mouse is not working properly. The scroll wheel doesn't work and when scrolling down on a web page with the keyboard it goes step by step. Are their any settings that I need tochange to make it work right?
 

A:Laptop touchpad mouse is not working properly

Some touchpads require specific drivers installed. Did you install these from the manufacturer? This is the integrated one on the laptop not add-in devices?
 

https://forums.techguy.org/threads/laptop-touchpad-mouse-is-not-working-properly.421227/
Relevancy 70.95%

Hi, I have a strange problem with my inspiron Inspiron 15 (N5050). When I plugged in the AC charger, the touchpad / mouse does not work properly. Sometimes it moves and sometimes not eventhough I have moved and touched the touchpad. When I disconnect the AC charger, the touchpad works perfectly fine. Can anyone give me advise on this? thanks in advance

A:My mouse/touchpad is not working properly while charging

Hi suneel_zee.
Welcome to the Community,
Have you tried different power outlets? Does this happen in different locations(even outside you house/work)?
I would suggest you to release flea power.To release flea power disconnect AC adapter,remove battery,disconnect all external peripherals(USB devices),press and hold power button for 30 seconds.
Reconnect the battery and AC adapter.Check how touchpad responds with AC Adapter connected.
If the issue persists try a different AC adapter(may be borrow from some one who uses same watt Dell AC adapter).
Let me know how it goes.
Thank You

http://en.community.dell.com/support-forums/laptop/f/3518/t/19481178
Relevancy 70.95%

hi
I have problem with multi touchpad, doasn't work. I think I just delete by mistake my drivers and I can't fund another one to dowland.
Thx for any help
kris

A:Touchpad is not working on my Satellite S50-B-12Q

I think I just delete by mistake my drivers



Are you sure?
What have you done in the past?

Usually you could roll back the system to the early time point and this would help to get the driver back.

Please try it out… use the Windows own internal option “Backup & Restore” to set the OS back to early restore point.

https://forum.toshiba.eu/showthread.php?83438-Touchpad-is-not-working-on-my-Satellite-S50-B-12Q
Relevancy 70.95%

For no obvious reason, the touchpad on my Satellite L70-C-13C stopped working
The mouse still works.
I've powered down and back several times without success... any ideas? The laptop is about 2 months old

https://forum.toshiba.eu/showthread.php?92173-Satellite-L70-C-13C-Touchpad-not-working
Relevancy 70.52%

Hello,

on your computer Toshiba Satellite T110-11J I want to install Microsoft Windows XP. I wonder if the drivers installed on this website is for 32bit system or 64bit system.

Thank you for your answer

A:Re: Windows XP and Satellite T110-11J

As far as I know Toshiba hasn?t supported WXP 64bit. 32bit version only.

https://forum.toshiba.eu/showthread.php?64987-Re-Windows-XP-and-Satellite-T110-11J
Relevancy 70.52%

Hi,

My mother has dementia and has forgot her password to access Windows, I've tried everything to get it or restore the laptop but it's seeming impossible , does anyone have any idea how to restore the laptop to factory settings?

Andy
 

A:Toshiba Satellite T110-121

Sorry to hear that
However, we are still unable to assist in bypssing any passwords

If you want to go back to factory settings - you will lose all the data and possibly any emails that have been used with a program on the PC and POP
Recovery

From CD
http://cdgenp01.csd.toshiba.com/content/support/downloads/PMA500339010_web.pdf

You may have a hidden partition on the harddrive - if so you can recovery from there -
BUT - you should also be able to create some bootable recovery DVD or CDs from the hidden partition using the toshiba recover cd creator

two ways to get to the hidden partition on Toshiba
Press an hold the zero key and power on - this will enable the recovery menu
OR on later models
Tap F8 as it boots and then use repair computer - from menu

hold F8 and turn on PC
choose first option
Repair PC

may need to change the keyboard layout to UK
then log in to Administrator user

Full menu of options appear

if not you can order replacement recovery cds
https://backupmedia.toshiba.eu/landing.aspx
http://cdgenp01.csd.toshiba.com/content/support/downloads/pma500208010_web.pdf

http://cdgenp01.csd.toshiba.com/content/support/downloads/PMA500339010_web.pdf
 

https://forums.techguy.org/threads/toshiba-satellite-t110-121.1167085/
Relevancy 70.52%

I am looking to increase the processing power of my T110-107, and I was wondering if it could take a different processor, and which processors it would take?

A:Satellite T110-107 - What processors can it take?

Hi

As far as I know the notebook is equipped with the Mobile Intel(R) GS40 Express Chipset
The new CPU needs to be supported by the chipset.
As far as I know the chipset supports
Intel? Core?2 Duo ULV CPU SU2700 1.30GHz CPU(956P)743 1.3G and the Intel? Celeron? Processor ULV 763 (1M Cache, 1.40 GHz, 800 MHz FSB)
But the point is that nobody knows if the new CPU would run stable in connection with the BIOS?
So there is always a small part of risk regarding this theme,?

https://forum.toshiba.eu/showthread.php?68269-Satellite-T110-107-What-processors-can-it-take
Relevancy 70.52%

Notebook won't power on.

Had sleep mode loght flashing amber. Plugged in mains adapter and getting green power light, and battery light turning green. No other lights lit.

Tried taking battery out and putting back. Sleep node light now stopped flashing.

Nothing happens when pressing on/off buton, or holding down.

Any help would be appreciated.

A:Satellite T110 won't power on

Disconnect AC power supply and remove battery. Leave it for a while and try to start your Satellite using AC power supply only.

https://forum.toshiba.eu/showthread.php?70920-Satellite-T110-won-t-power-on
Relevancy 70.52%

I bought a Satellite T110 (Win7). There's no Stereo Mix option with the recording devices. I marked show disabled and disconnected devices. I updated the conexant driver (4.98.16.61). Nothing helped. Still no stereo mix option. I tried connecting a male-male cord from headphones to line in - gave very bad quality.
please help!

Message was edited by: lelbd

A:No stereo mix with Satellite T110

Hi

As far as I know the Conexant sound chip does not provide this functionality.
As far as I know Stereo Mix is supported by Realtek chip but Conexant sound chip misses this feature.

Greets

https://forum.toshiba.eu/showthread.php?53202-No-stereo-mix-with-Satellite-T110
Relevancy 70.52%

IS IT POSSIBLE TO INSTALL WINDOWS XP IN TOSHIBA SATELLITE T110.
BECAUSE WHEN I START INSTALLING XP IT SAYS SOMETHING "HARDISK ERROR" PRESS F3 TU QUIT.

WHAT SHOULD I DO ??

A:Is it possible to install Win XP on Satellite T110?

Of course its possible.
The Win XP does not seem to recognize the HDD due to missing SATA driver.
You have to add SATA driver while Setup procedure.
The SATA drivers are part of Intel Storage Manager which you can download from Toshiba EU driver page.

https://forum.toshiba.eu/showthread.php?68069-Is-it-possible-to-install-Win-XP-on-Satellite-T110
Relevancy 70.09%

Hi nbsp I got my nbsp HP ENVY t-q CTO Notebook PC in September It has Windows -bit For the first few weeks of use I did not have any issues Then I started having more occurences of cursor touchpad issues to the point where it happens every hour of use not an external mouse issue nbsp Jumps around on screen a few millimeters to inches nbsp Move incrementally on its own without me anywhere near the laptop generally spazzes to the left nbsp Not allow scrolling normal touchpad functions when issues are occuring nbsp Functions as if I am holding down the click button while I try to move it - most sporadic, not ... jumping, and touchpad working properly Cursor frustrating part when I am doing important work nbsp Randomly click stuff as I attempt to move it nbsp nbsp Here is what Cursor jumping, sporadic, and touchpad not working properly ... I have tried to do Cursor jumping, sporadic, and touchpad not working properly ... to fix it and has not worked Roll back driver didn't work nbsp Update driver no updates available nbsp Reset device works for a minute or so nbsp Restart I do this daily anyway nbsp Reduce cursor speed and other mouse options suggested online nbsp nbsp nbsp I have seen similar issues for the HP Envy and other notebooks but no actual fixes have been proposed Please help me with this issue nbsp

A:Cursor jumping, sporadic, and touchpad not working properly ...

Hi Please find the link given below might help you to fix your issue. In case you have already tried the steps let me know. Link Try updating the Bios then update the update the driver. Try performing a system restore to the date where unit was working fine.

http://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/Cursor-jumping-sporadic-and-touchpad-not-working-properly/td-p/4666130
Relevancy 70.09%

Hi I m a first-time user and happy to have found your website My operating Working Touchpad 7520 Not Inspiron Properly Dell system is Windows I am using a wireless Logitech Mouse uses USB hardware I Dell Inspiron 7520 Touchpad Not Working Properly have had this laptop for years PROBLEMS The touchpad will not turn off Under Dell Inspiron 7520 Touchpad Not Working Properly quot Mouse quot on the Control Panel functions for the Dell Touchpad should allow me to simply turn the touchpad on and off Regardless whether it is Dell Inspiron 7520 Touchpad Not Working Properly in the on or off position it is still on Even when I don t touch the touchpad the cursor skips around the screen highlights text and deletes text Typed text re-locates within earlier typed text There is an on off light at the top of the touchpad that indicates the touchpad is on off This is not working Also this panel item allows me to manage sensitivity buttons gestures amp edge scroll amp zoom I can work these but the Edge Scroll amp Zoom buttons do not see to change the settings WHAT I HAVE DONE TO ATTEMPT RESOLUTION I have checked the drivers for both the touchpad and mouse and I get messages that they are each up to date Because the touchpad will not turn off I have tried to manage the buttons to turn down the sensitivity to minimize movement of text This does not help Turning on Disable Touchpad amp Point Stick when USB Mouse present does not disable the touchpad nbsp

https://forums.techguy.org/threads/dell-inspiron-7520-touchpad-not-working-properly.1165207/
Relevancy 70.09%

Hi,

On windows 7 the touchad isn't working properly meaning that I can't scroll on pages by sliding my finger at the edges of the touchpad. It worked perfectly witn Vista and now it's not. I have 64bit version.

I searched for new drivers but there aren't any. How should I resolve this?

Thanks,

A:Portege M800 - Touchpad not working properly on Windows 7

What Model do you have exactly?

PPMxxx-xxxxxx?

https://forum.toshiba.eu/showthread.php?55714-Portege-M800-Touchpad-not-working-properly-on-Windows-7
Relevancy 70.09%

Hello guys,

I have a problem with the touchpad of a Toshiba Satellite Pro R50-b pssg1e - basically, I can move the cursor, but I cannot use it to scroll or anything else.

I have encountered this problem firstly on windows 8.1 and I thought there wasn't yet a driver for the touchpad. Now, I have installed Windows 7 64bits and still the same problem. Idon't understand the problem, I have installed all the drivers from the website including "touch pad driver made by alps electric".

In device manager, the mouse is recognized as just a Ps/2 compatible mouse. And, in the mouse settings, I don't have an advance tab where I can enable the extra functions of the touchpad.

Ps. the touchpad is enabled, so, no, the solution isnt fn+f5.

Thank you very much in advanced!
Andrei

A:Satellite Pro R50-B - touchpad functionality isn't working

I think I have zeroed it on the problem - the touchpad driver from toshiba.com is not installing.

I've tried it a number of times - at the end of the installation process, it says that the installation is successful, but I cannot find anywhere on the computer.

Any other place where I can find a working driver for the alps touchpad for toshiba satellite pro r50?

https://forum.toshiba.eu/showthread.php?80882-Satellite-Pro-R50-B-touchpad-functionality-isn-t-working
Relevancy 70.09%

Can anyone please tell me why the touchpad has suddenly stopped working. I have done FN F5, it is enabled. Thanks in advance.

https://forum.toshiba.eu/showthread.php?94929-Touchpad-not-working-on-Satellite-L-series
Relevancy 70.09%

Toshiba satellite c -a- About months ago my laptop keyboard stopped working When The log in screen came on the password box filled up with black dots and I was unable to delete them It was like a / C50-A-156 Keyboards not working touchpad Satellite key was stuck I was mid exams so used Satellite C50-A-156 Keyboards / touchpad not working the ease of access to log in and bought a usb keyboard to use so I could use it as I was unable to find a fix for it online I also updated from Windows to Windows in a bid to have it working again I've been using the usb keyboard since now completed exams and I've just turned to laptop on The same thing is happening however now my mouse is not working so I can't click on the ease of access I've changed usbs for the keyboard - nothing Unplugged removed battery turned on A lot Seen on a forum to combine these and repeatedly press f then f enter and F enter but this isn't working on either keyboard I've done ctrl alt delete X but still Nothing is coming up I've attempted to reboot it by following online instructions but nothing is coming up It's only responsive when I press enter on usb keyboard once all the endless black dots are there in the password box Then it comes up its incorrect obviously but I can't press enter again to get back to a clear password box in an attempt to renter my password I don't use my laptop that often outside exam time and it's mainly for lesuirely use but this is infuriating Also I hope this makes sense because I'm really out of my depth here I'm clueless on this stuff Thanks

https://forum.toshiba.eu/showthread.php?92376-Satellite-C50-A-156-Keyboards-touchpad-not-working
Relevancy 70.09%

To start off I seen another thread about the TouchPad not working but this is a slightly different situation First off it's a really new computer and I'm dual booting windows and linux Anyways the TouchPad only works in windows but it not TouchPad Satellite working Toshiba randomly stops Toshiba Satellite TouchPad not working working every once in a while and I have to go into the mouse settings and re-enable it but what I thought was really weird is that when I go to the efi firmware settings it doesn't work either The mouse cursor is stuck on the left side of the screen and i have to use the keyboard to navigate even a Bluetooth mouse won't work there That tells me that is not a windows issue but that also tells me that is not a hardware issue either because it works in windows when i enable it in the settings I also have to use the bluetooth mouse for linux as it doesn't work at all I'm not a noob by no means i fix pc's for a living and i usually have some kind of idea on how to fix issues but this one i have no idea Any help would be great Thanks Sent from my SGH-M N using Tapatalk

A:Toshiba Satellite TouchPad not working

Did u try putting your USB mouse in another USB slot?
Does your mouse even turn on?

http://www.techist.com/forums/f84/toshiba-satellite-touchpad-not-working-276546/
Relevancy 70.09%

I just turned on the laptop and as was trying to set up wifi connections the touchpad stopped working.

I tried the Fn+F9 but nothing changed. I turned the laptop off and then back on without any results.

I can work connecting a usb mouse, but the touchpad is still not working.

Do you have any solution or do I have to take it to be repaired?

I bought it one week ago and I just had office and antivirus installed and was working perfectly well up until now.

Thank you

A:Satellite Z30-B-100 - enabled touchpad not working

Does the touchpad work in the BIOS?

If not, it may be a hardware problem, or it is simply disabled in the BIOS.

https://forum.toshiba.eu/showthread.php?83531-Satellite-Z30-B-100-enabled-touchpad-not-working
Relevancy 70.09%

Hello,

Just tried to boot up my T110-11U and got 3 quick beeps followed by 2 slow beeps, any ideas?
I tried removing the RAM and swapping them around & also tried some ram I know works out of my other laptop without and success.
Any ideas? Also the screen does not come on at all just keeps making the beeping sounds.

Thanks for any replies...............

Neil

A:Satellite T110-11U wont start up

Hi

The beep codes means that an error on motherboard has been detected.
The notebook supports Phoenix BIOS.
You can google for Phoenix BIOS beep codes to check what this could mean.
But generally it?s something with hardware? so possibly you will need a new board.

https://forum.toshiba.eu/showthread.php?59196-Satellite-T110-11U-wont-start-up
Relevancy 70.09%

We have lost our password on only the second time out of the box!

I believe we need to launch the Disk2Disk recovery feature by pressing F8 when the computer is first switched on and select from menu Repair my Computer. This o.k. but Toshiba HDD recovery is also password protected.

Help please!

A:Satellite T110-121 lost password

Hi mate

What password do you mean exactly?
Are you speaking about BIOS password which appears directly after powering the notebook?

If yes, then I have bad news for you;
You will need assistance from Toshiba ASP technician :( Only the ASP can remove such password.

https://forum.toshiba.eu/showthread.php?59408-Satellite-T110-121-lost-password
Relevancy 70.09%

My computer is 3 years old. about a month ago when I turned it on it only showed the THOSHIBA logo and a black lit screen (like its waiting to start, but it wont). The support center guided me to unplug the ac adapter and the battery and wait a while, than plug it back in.

It worked and i left the computer on until I bought a new battery thinking that was the problem (the old battery wasn't charging anymore).

Everything was ok for a few days since i made sure the new battery will always be full but yesterday i left it without the ac adapter and the battery got completely empty- and now it wont turn on again.

Please help. tnx

A:Satellite T110 wont load

And did you try to repeat the same procedure recommended by service agent?
Remove AC adapter and battery, wait a while and then connect all parts again?

Otherwise I don?t think its battery problem since the notebook should also work with plugged AC adaptor.

https://forum.toshiba.eu/showthread.php?71670-Satellite-T110-wont-load
Relevancy 70.09%

Hi guys,

I have this model *T110-10x* and I was wondering when should the front LED for Wireless WAN should be blinking or turning on?
This is the model's specifications page:
[http://eu.computers.toshiba-europe.com/innovation/product/Satellite-T110-10X/1076616/|http://eu.computers.toshiba-europe.com/innovation/product/Satellite-T110-10X/1076616/]

I have bought a 3G USB modem which is working just fine, but I was just curious if the laptop needs to have an embedded 3G modem, and if so, what is the meaning of the FN key and the LED as this model doesn't have a built-in modem.

Thanks.

A:Satellite T110-10x - Wireless WAN LED not turning on

Hi mate

Please take a look into the User manual which should be preinstalled on the notebook.
There you will find a info that the FN buttons in combination with F1-F12 buttons would enabled some features/options.
Also the Wlan/WAN can be enabled and disabled using the FN button!

>...should the front LED for Wireless WAN should be blinking or turning on
The LED should be ON and it does not flashes...

https://forum.toshiba.eu/showthread.php?55889-Satellite-T110-10x-Wireless-WAN-LED-not-turning-on
Relevancy 70.09%

Hi

I have a Satellite T110-10N. The battery does not load 100% only on 50%. I like to know how recalibrate it.

A:Satellite T110-10N - How to recalibrate my battery?

Hello

Why you want to recalibrate the battery?

If it loads only up to 50% it means that some battery cells are dead and you have to replace the whole HDD. The battery can be charged 500 times, then it needs replacing and sometimes the battery cells get faulty.

I recommend contacting an authorized service provider. The guys can order all Toshiba spare parts.

https://forum.toshiba.eu/showthread.php?55585-Satellite-T110-10N-How-to-recalibrate-my-battery
Relevancy 70.09%

Hi,

I have a T110-107.
For security reasons i only turn the wireless LAN on when i require it.

The problem is that sometimes 'something' switches it on, sometimes when i boot up and sometimes while i'm using it.
I use the 'FN' and 'F8' hotkeys to switch my WLAN on and off so there's no possibility that i can do it accidentally.

Can anyone help?.

A:Satellite T110-107 WLAN keeps switching On?

Hi

Sometimes something enables WLan???
Strange? as far as I know you can disable the WLan using the FN + F8 button combination.
Be sure that you have disabled this using these keys and ensure that you don?t enable the WLan accidentally pressing these keys.

Greets

https://forum.toshiba.eu/showthread.php?62322-Satellite-T110-107-WLAN-keeps-switching-On
Relevancy 69.23%

Hi guys and Circle Loading Flashing Not Touchpad Working Elantech Properly I Elantech Touchpad Not Working Properly and Flashing Loading Circle hope someone can help me with this Elantech Touchpad Not Working Properly and Flashing Loading Circle So I recently upgraded from Windows to Windows and I noticed a few issues with the touchpad on my laptop two finger scrolling no longer works Now I have to drag one finger on the right edge of the touchpad up and down in order to scroll vertically I've also noticed the blue loading circle beside the pointer keeps flashing roughly once per second whenever i leave it alone even if I am not running any programs I can leave it on the desktop and the blue circle still keeps flashing It appears Win installed a new driver called ELAN Input Device That's what it says when I go to the device manager However when I go to the settings menu gt devices gt mouse and touchpad gt additional mouse options to the mouse properties there is no way to configure the gestures I found out that I have to go to the Elantech folder in program files and run the ETDAniConf application and that brings up the gesture customization menu However when I run the program the option for two finger scrolling pinch zoom etc are checked on as is the default There is no option for one finger right side scrolling like I mentioned earlier And as I said the blue circle keeps flashing when idle My laptop is a MSI GT running Windows upgraded from which was updated from Any help would be greatly appreciated To sum up ELAN is messing up my touchpad and the pointer loading circle keeps flashing when idle Thanks for reading

http://www.techsupportforum.com/forums/f338/elantech-touchpad-not-working-properly-and-flashing-loading-circle-1081937.html
Relevancy 69.23%

I recently updatet my Laptop (Z930-12m) to windows 10, everything is working fine so far, except the Touchpad (Synaptics).
I can't scroll any more and also the momentum setting I used before seems not to be working any longer.

So I ask myself are there any updates for the drivers planed for this? Or can I get them anywhere else?

A:Portege Z930-12M - Touchpad is not working properly after Windows 10 update

Update:
The scrolling on the touchpad works now, I just did not adjust the settings properly.
But the momentum still does not work.
Anyhow, I found a view drivers for my laptop
http://win10upgrade.toshiba.com/swup...=DE&country=AT

https://forum.toshiba.eu/showthread.php?84069-Portege-Z930-12M-Touchpad-is-not-working-properly-after-Windows-10-update
Relevancy 69.23%

Hi

My keyboard and touchpad stopped working out of nowhere (i think it was after windows updated???) and i can't seem to be able to fix it, i tried to reinstall the touchpad drivers and nothing changed, also i couldn't find the keyboard drivers.

is there anything someone can recommend me to do? I'm going insane with this laptop!

(The model is Satellite M50-A-118)

A:Satellite M50-A - ELAN touchpad stopped working

Identical problem here. Satellite M50-A-11Q. Allowed windows update and touchpad and keyboard drivers are disabled.

Using an external mouse to access - currently doing a system restore to before the latest update. This looks like a fault at Microsoft's end.

Will update once I have a definite solution.

UPDATE: Restore has temporarily fixed the problem. Disabling windows update for the time being.

https://forum.toshiba.eu/showthread.php?82754-Satellite-M50-A-ELAN-touchpad-stopped-working
Relevancy 69.23%

my daughter received the above from f. christmas. the touch pad and associated buttons have stopped working - no cursor. how do we get it working again? Rod+

A:Satellite C50-B-189 touchpad and buttons stopped working

Hi, this is due to the pad driver (which is bugged), just kill the process using CTRL+SHIFT+ESC AND THE TAB plus DOWN ARROW to navigate to the target process. I have to do this each starts.

From tomsguide (november 2014):





These fixes don't help, all that happens is, after some time, the touchpad fails again. While Toshiba works on this, I have figured out a quick, effective workaround. This is for my new Windows 8 Toshiba.
Press CTRL ALT SHIFT to get your processes to come up. Find the Touchpad "enhancer" process. End the process. Your touchpad will work fine until next restart at which point just repeat this step.
If you are struggling to end the process without being able to use your touchpad, I found a curious thing out. If you hold a mouse click down, you can move the mouse arrow with the touchpad just fine. Its a bit... inconvenient...but all you need to do this for is to end that process and after that you can use the touchpad normally.

https://forum.toshiba.eu/showthread.php?89660-Satellite-C50-B-189-touchpad-and-buttons-stopped-working
Relevancy 69.23%

on my childs satellite click mini L9W-B-102 the touch pad dosnt work and no mouse pointer can someone please help me

https://forum.toshiba.eu/showthread.php?89832-Touchpad-not-working-on-Satellite-Click-Mini-L9W-B-102
Relevancy 69.23%

As the tiltle suggest.

My laptop is a Satelltie Pro A300 2C4.

The Touchpad no longer responds,

I have tried FN F9 - nothing happens.
I have tried pressing top left corner of Touchpad - nothing happens.
I have tried going to control panel mouse and looking for an enable Touchpad bit can only find the mouse defined.

The O/S is Windows 7

A:Satellite Pro A300 Touchpad has stopped working

Hi

Did you try to install the touchpad driver?
You can find the touchpad driver on the Toshiba EU driver page.

Additional tip: in some cases its possible to enable and disable touchpad in BIOS.
Please check this!

By the way: is an external USB mouse attached to the notebook? if yes, disconnect this and try to use the touchpad

https://forum.toshiba.eu/showthread.php?69815-Satellite-Pro-A300-Touchpad-has-stopped-working
Relevancy 69.23%

Hi,

In the beginning of this week I bought Toshiba satellite Z30-A-1D0.

My touchpad seemed fine but once in a while the cursor stops working for about 1 minute. I can use the left and right button of the touchpad but I just can't move the cursor.

First I thought that I accidentally had locked the touchpad so I pressed Fn+F9 and the light turned on meaning that the touchpad was locked, then I pressed it again and the cursor was still not moving, it only starts almost a minute after... I've tried to be at alert to what I'm doing in the touchpad but it happens when i'm just moving the cursor.

This happens about 4 times a day and the fisrt time it happened was on the day I bought. And I never used a USB mouse in this computer.

Thanks for your atention to my problem and hope you can help me.

A:Touchpad stops working for a moment on my Satellite Z30-A-1D0

It is not easy to say why this happen.
If possible try to use external mouse. It will be interesting to know if there is some general problem with mouse or just with internal touchpad.

https://forum.toshiba.eu/showthread.php?78450-Touchpad-stops-working-for-a-moment-on-my-Satellite-Z30-A-1D0
Relevancy 69.23%

I have been using both the touchpad and usb mouse together successfully for many months then first the touchpad stopped responding then 30 minutes later the pad buttons quit working.

I have been in control panel and made sure the touchpad is turned on, tried it with the mouse unplugged, nada.

Any ideas?

Toshiba Satellite M-100 1111e

Thanks
 

https://forums.techguy.org/threads/toshiba-satellite-touchpad-stopped-working.530153/
Relevancy 69.23%

Hi.

I have a Satellite Pro P300 running Vista and the scroll function has given up the ghost on my machane too.
I have also lost the touchpad icon in my task bar and the function to configure the touchpad.

I have unistalled and re-installed the drivers to no avail.

If I had more hair, I'd probably be tearing it out. Please help.


Thanks

A:Touchpad on Satellite Pro P300 stopped working

Strange.
Have you in device manager under ?Mice and other pointing devices? listed ?Synaptics PS/2 Port TouchPad??

Is anything else listed there?
Is maybe touchpad disabled (FN+F9)?

https://forum.toshiba.eu/showthread.php?51502-Touchpad-on-Satellite-Pro-P300-stopped-working
Relevancy 69.23%

I would like to install just Windows 7 on my Satellite T110 and remove all the Toshiba software/nag screens. I also have my own copy of ms office that I would like to install,
Sourcing all the additional drivers will not be an issue.

Can i source a Disk from Toshiba for Windows 7? Has anyone else here had experience of doing this?
thank you

A:Satellite T110 - Disk from Toshiba for Windows 7?

Hi buddy,

As far as I know such a disk is not available but you can download all drivers and tools on Toshiba website:
http://eu.computers.toshiba-europe.com > Support & Downloads > Download Drivers

If you want Windows 7 64bit, all drivers and tools you can download on this page! :)

https://forum.toshiba.eu/showthread.php?57546-Satellite-T110-Disk-from-Toshiba-for-Windows-7
Relevancy 69.23%

Hi all In traditional fashion I've joined Won't Driver Satellite WLAN Locate T110-11U the forum because I have an issue but was unable to find a helpful solution I have a Satellite T - U that I purchased years ago while in the UK As I'm about to upgrade I'm preparing it to give to a friend who currently has nothing The original HHD gave out a while ago forcing to fit new and load Win bit independently I'd like to say I have the reload disks but they never worked I've loaded up all the latest drivers but the WLAN driver doesn't work Toshiba's website says Satellite T110-11U Won't Locate WLAN Driver I need an Intel driver wlesslan- but I'm pretty sure it's a realtech interface I've connected the laptop to the internet via the LAN interface and done a search through device manager Nothing Still shows up 'other devices' Can anyone share a link to the driver I need or offer any handy but not too technical hints as to what I can do Thanks Ady

A:Satellite T110-11U Won't Locate WLAN Driver

OK,

I eventually found it here:

http://www.driverscape.com/manufacturers/toshiba/laptops-desktops/satellite-t110/3634

https://forum.toshiba.eu/showthread.php?91581-Satellite-T110-11U-Won-t-Locate-WLAN-Driver
Relevancy 69.23%

Hello,

I just reinstall a fresh copy of windows and I can't find the driver for ACPI\QCI0701
tell me which driver I should use

fine thank you

A:Satellite T110-107 - need driver for ACPI\QCI0701

And can you tell us which windows you have installed?

By the way ? check http://forums.computers.toshiba-europe.com/forums/message.jspa?messageID=190545

https://forum.toshiba.eu/showthread.php?55731-Satellite-T110-107-need-driver-for-ACPI-QCI0701
Relevancy 69.23%

Hello,

I just would like to know if Toshiba doesn't made the Satellite T110 any more? Because here in spain I don't find it anywhere to buy it.
If it's true that Toshiba don't made it anymore, is there an other toshiba notebook with a size screen between 11" and 12" ? Is just the size that I want.

Thanyou,

Kind regards.

A:Satellite T110 Series offer in Spain

Hello Nicolas

T series is pretty old and I can imagine this model will not be offered anymore. If you check Toshiba Europa page or Toshiba Spain page you will see that Toshiba offers second generation of T series. This new model looks much better as old T notebook.

T series notebooks were reworked and now Toshiba offers them in new look, modern design and, I believe, with Win7 as operating system.

Visit Toshiba pages and check these new models.

https://forum.toshiba.eu/showthread.php?59493-Satellite-T110-Series-offer-in-Spain
Relevancy 69.23%

Could anyone please tell me how I fit a new power port in my Toshiba Satellite T110-121.
My daughters boyfriend was going to replace it, but they have since split up.

A:Power port replacement for Satellite T110-121

Hi

The replacement is very, very tricky because you have to disassemble the whole notebook unit.
You have to remove all parts before you will get access to the motherboard and to the DC in cable.

I don?t think you can do this without any step by step instruction and guidelines.

As far as I know and as suggested in this forum, the maintenance manuals are not available for common notebook users. Such manuals are released only for authorized service technicians and I think you will not be able to download such manuals but I think you can search in internet for some useful information and details.

For example you could take a look on irisvista.com website and could look for Satellite T110/T115 series how to disassemble such units.

But such disassembling is your own risk!

https://forum.toshiba.eu/showthread.php?75937-Power-port-replacement-for-Satellite-T110-121
Relevancy 69.23%

Hello,

After manually installing windows 7 32bit on my satellite T110-13R after formatting the C: drive, my wireless card does not want to connect and fn + f8 does not work.

The wireless card appears in the Device Management but does not connect and no network is detected.

All other functions are OK.

After downloading several drivers on the support, nothing changes ....

Wanting restore in a state of factory with f8 at startup, HDD TOSHIBARECOVERY function is not available.

Excuse me for my bad english

Thank you for your help.

A:Satellite T110-13R wireless card does not want to be connected

Hello

If your notebook was delivered with Win7 64bit home premium and you have installed yours 32bit version original HDD image installation cannot be started anymore. This works with ?factory settings? only.

Have you installed Toshiba Value Added Package?
Be sure WLAN card is enabled properly. Yu can do this using ConfigFree tool too.

https://forum.toshiba.eu/showthread.php?62409-Satellite-T110-13R-wireless-card-does-not-want-to-be-connected
Relevancy 69.23%

Hi,
I'm looking for battery for my T110-11U, but in the store Toshiba and other shops is not available.
The number of baterry PA3780U-1BRS.
Can I use other battery for my laptop?
If yes which ones?

Sorry for my english.

Thanks
Best Regards

A:Baterry PA3780U-1BRS for Satellite T110-11U

According notebook specification your notebook has 6 cell battery and you can use follow batteries:
PA3780-1BRS
PA3821U-1BRS

https://forum.toshiba.eu/showthread.php?74695-Baterry-PA3780U-1BRS-for-Satellite-T110-11U
Relevancy 69.23%

How do I increase the volume of the speakers in my T110?
Ive read other forums that suggest thats just the way it is but that cant be right - its impossible to hear on max.
My partner has a Toshiba NB300 (much smaller) but the speaker volume is much better.
Is it a common problem with T110 buyers?
Is there a fix PLEASE?

A:Satellite Pro T110 - speaker volume problem

Hi buddy,

I never saw any other forums where people talk about low volume on Satellite T110? I also have this model and the sound volume is ok for this small and ultra portable notebook.

I think you want to increase the volume when watching movies or listen music, right?
Well, in this case I would recommend using VLC media player. In my opinion it?s the best freeware player and using it you can improve volume compared to Windows media player.

Have a look on Google to find it. It?s freeware tool so I don?t think it?s a problem to find. ;)

Check this!!!

https://forum.toshiba.eu/showthread.php?59207-Satellite-Pro-T110-speaker-volume-problem
Relevancy 69.23%

I received my new T110-121 the other day and after a couple of hours use a small black dot appeared on the screen and has remained in the same spot since even after the computer being switched off and on again.

Ordinarily such a thing would not bother me too much but i have just purchased the laptop and it is bugging me.

I was wondering if anyone would know how to resolve this issue or if it is something that need repairing?

A:Satellite T110-121 Black dot constantly on screen

Hi

It looks like an dead pixel on the screen.
Such dead pixels are not unusual and this could happen.

I found this Toshiba document:
+Information on screen technology and pixel failure tolerance for LCD displays+
http://aps2.toshiba-tro.de/kb0/TSB9502LZ0000R01.htm

It seems that an certain pixel value is required in order to get the screen replaced.

https://forum.toshiba.eu/showthread.php?56604-Satellite-T110-121-Black-dot-constantly-on-screen
Relevancy 68.8%

HI all, I am a little concerned about my defrag report.

When it Analyses, the first third is mainly blue with some fine red lines the rest is white with massive of red lines and two bits of green. After defrag it looks not better, the report says 10GB could not be moved doc/settings and quite a few lesser things.
No matter how often I defrag I get the same results and even if I Analyze after defrag it always says defrag now.

I have tried Windows tools for repairing bad sectors but to no avail. Could I just say having said all this, the computer although a bit slow seems to work ok, with no real problems but would appreciate any advice

Satellite P10 504 and XP pro
[used to be XP home]thanks my friends, colin

A:Satellite P10-504 - Defrag isn't working properly

Hello

What Service Pack have you installed for Windows XP?

In my opinion the problem is Microsoft related so you should search on the Microsoft Knowledge Base or contact Microsoft directly for this problem.

But have you tried another defrag tool? I?m using O&O Defrag and I?m very satisfied with it because it works more efficient as Windows tool.
Check this!!

Greets

https://forum.toshiba.eu/showthread.php?46933-Satellite-P10-504-Defrag-isn-t-working-properly
Relevancy 68.37%

Hello. I upgraded my laptop Toshiba satellite S50D B100 to Windows 10. And everything is perfect the only problem I've had since I updated the touchpad is not working at all or to the left or right click. My ELAN touchpad is smart pad 15.8.3.2_X64_WHQL version. I searched all over the internet and can not find a solution valid. From what I understand the problem is to update this driver. I went to the ELAN own page and can not find the update, but it says I have to go to the computer manufacturer. I went to the page and neither toshiba meeting and nose to do this and the truth esque driving me crazy because I can not use my laptop and I need it urgently. I appreciate a prompt solution. Thank you.

A:Satellite S50D-B - TouchPad is not working after update to Windows 10

Hello

after two full days looking for a solution to this problem validates I found in a Microsoft forum page to download the driver and achieve ELAN touchpad solve the problem or I think because so far not returned to give me problems.

What I did was this link between this

http://support.toshiba.com/drivers locate the driver called ELAN touchpad was published on 07.08.2015. After my toshiba I went to settings, devices, mouse and touchpad, extra mouse options, Hardware, properties, General, change settings, controller and revert to the previous driver, restart the PC and then install the driver to download toshiba page back to restart the PC.

But I discovered that the update had launched ELAN Microsfot not go away so I went back to reverse the upgrade I had done with the downloaded driver, restart and install Microsoft had released early and then went back to restart the PC.

At the end the whole process I did not need to reinstall the driver unloaded and everything works perfectly so far.

I hope you like because I really suffered much to find an effective solution and that I did not lose the functions of the touchpad.

A greeting.

https://forum.toshiba.eu/showthread.php?85055-Satellite-S50D-B-TouchPad-is-not-working-after-update-to-Windows-10
Relevancy 68.37%

Hi Toshiba Fans,
I got some very odd problems. The keyboard works in the BIOS but later on, after windows 7 64bit booted only if I go in sleep mode and awake.
Why is that?
The touchpad is not working at all, neither the pad, nor the buttons. I have activiated it with the little black button above the touchpad.
Bye
Philip

https://forum.toshiba.eu/showthread.php?92434-Satellite-L755-Touchpad-and-keyboard-not-working-AFTER-sleep
Relevancy 68.37%

hey all, i'm typing from a keyboard-only laptop that i'm fixing for a friend. it's got a standard touchpad and mouse buttons, but they dpn't work. iver tried updating the drivers, uninstalling, etc to no avail. the driver status is always 'the device could not start' leading me to believe that the touchpad's hardware has burned out, but would this explain a USB mouse not working? it's a kensington USB mouse, and i dont know the model right now.. it has all supposedly worked before but now it doesnt. everything on the laptop seems to be in perfect working order... LCD screen, sound, wireless, speed, etc.it's a windows xp sp2 with pentium 4.
any help would be appreciated..
ram
 

A:Toshiba Satellite A45-S250 touchpad/mouse NOT working

bump
 

https://forums.techguy.org/threads/toshiba-satellite-a45-s250-touchpad-mouse-not-working.360187/
Relevancy 68.37%

Hi,

Just bought a Satellite S50D-B last week. Comfortable with technology. Updated to Windows 10 (3rd machine I have done this on). New laptop is the only one giving problems. Tried enabling in the Settings - seems Win 10 auto disables the device which is strange. Indeed this (kinda) works except for the left and right buttons. Tried reinstalling Elan software but no change. Any ideas?

Thanks in advance,

Peter
There can be only One Highlander (1Timothy 2:5)

A:Satellite S50D-B - TouchPad is not working after update to Windows 10

Hi
I have the same problem - I updated a brand new Toshiba Satellite S50D-B-100 to Windows 10 and the cursor has disappeared all together. I connected a USB mouse and re-enabled the touchpad in Control Panel's mouse/touchpad settings but I am still unable to see the cursor, or have any functionality at all from the touchpad. Uninstalling and re-installing and re-starting does nothing... now the laptop is tethered with a USB mouse = please help !

https://forum.toshiba.eu/showthread.php?83885-Satellite-S50D-B-TouchPad-is-not-working-after-update-to-Windows-10
Relevancy 68.37%

Remember this recent thread?

https://forum.toshiba.eu/showthread....topped-working

Well guess what my mouse and touchpad stopped working again today, this time during a Windows update (rather than after) - and guess what... the "Elan - Other Hardware - ELAN Input Device" was one of the updates, same as last time.

The good news, for me anyway is that the problem was temporary this time. After forcing a reboot by a long press of the power key, mouse and touchpad functionality was restored after the updates finished installing.

EDIT - just to say that my touchpad customisations e.g. reverse direction of scroll, 3 finger press to launch browser etc. have all been lost. No big deal, just a nuisance

A:Satellite M50A - ELAN touchpad stopped working - again!

And as a follow up, having edited the registry to restore the functionality to launch my favourite browser with a 3 finger press (see another thread for reason for why I had to use regedit) I've had intermittent results.

I've now realised that the 3 finger "press" feature seems to have disappeared to be replaced with a 3 finger "touch". It's not documented that I can see, the registry key names have remained the same but pressing doesn't do anything while a lingering 3 finger touch does work.

https://forum.toshiba.eu/showthread.php?83686-Satellite-M50A-ELAN-touchpad-stopped-working-again!
Relevancy 68.37%

I went to use my laptop today, and I discovered that the touchpad has stopped working. In fact, I was unable to even get past the sign-on screen, and if it weren't for the fact that I got a mouse arrow with a plug-in USB mouse, the laptop would be completely dead to me.

My son uses the laptop for Minecraft gaming, but I don't think that has anything to do with this. Even a reboot didn't change anything. I wonder if a Windows update screwed something up (again)? I'm at a loss. I'm not always where I can set up a physical mouse to use - and frankly I don't want to have to.

Any suggestions?
 

A:My Toshiba Satellite touchpad suddenly stopped working

Found the solution. When I pressed the F5 button (not Fn + F5), I got a popup that said "touchpad disabled." When I pressed it again, it said "touchpad enabled." I unplugged my USB mouse and tried again, and it's now working. What a screwed up design that allows a user to accidentally disable one's touchpad with an accidental press of the F5 key. Then you have to research the problem before figuring out the problem. Someone in the Toshiba laptop design department should be fired.
 

https://forums.techguy.org/threads/my-toshiba-satellite-touchpad-suddenly-stopped-working.1172008/
Relevancy 68.37%

I have a Toshiba Satellite U50T-A-10F which did the usual turn off and update last night however when I turned it back on the scroll mouse and keyboard won't work I managed to get in on because the touchscreen is still working but does anyone know why it would of updated then won't work?

Tried phoning support but only open Monday to Friday, I did take out extended warranty thank god!

A:Satellite U50T-A-10F - keyboard and ELAN touchpad not working

Having the exact same problem here, having to type on the touch screen as my keyboard and mouse have suddenly stopped working. Very annoying as I really need to use my laptop at the moment. Any suggestions on how to fix it are very much welcomed.

https://forum.toshiba.eu/showthread.php?82748-Satellite-U50T-A-10F-keyboard-and-ELAN-touchpad-not-working
Relevancy 68.37%

For no reason at all. (as far as i can recall). I was just doing random stuff on pc (like every other time), surfing the web, while I just recognized my scroll on touchpad isn't working. I tried rebooting pc, turning touchpad on and off, but didn't hepled.

I have Satellite R850 2R notebook with win7 on it.

A:Satellite R850 - scroll on touchpad stopped working

Try to check if Windows update has installed something today and roll back OS to earlier time (two days back if possible) using system restore tool.

I don?t know if this will help but you can try it. Several times I saw that synaptics driver update is offered by option windows updates.

https://forum.toshiba.eu/showthread.php?68745-Satellite-R850-scroll-on-touchpad-stopped-working
Relevancy 68.37%

I have the T110, I can create the recovery discs in Windows but when I restart the computer and press F12 it shows no CD/DVD drive in the BIOS.

So I cannot restore from or boot from the external CD/DVD drive.

Help!

A:Satellite T110 - USB powered CD/DVD drive not recognized in BIOS

Hey,

I don?t have the notebook in front of me but check the BIOS if you can find an option called ?USB legacy support?. If yes you have to enable this feature that your notebook can recognize the external drive.

Can you boot from an USB stick? I mean you can also create the recovery files on an USB stick so this would be also an option to restore factory settings.

https://forum.toshiba.eu/showthread.php?60672-Satellite-T110-USB-powered-CD-DVD-drive-not-recognized-in-BIOS
Relevancy 68.37%

Does anyone know the part number for a set of hinge/display supports for the T110-121?

Mine broke last week and I can't seem to source a replacement or suitable alternative.
Thanks in advance.

A:Satellite T110-121 - broken hinge/support bracket

Huh... it is not easy to get such information but, in my opinion, you don't need it. all Satellite T110 have the same hinges and there is no difference.
Different can be only mainboard and some other hardware components like HDD, Ram WLAN card and so on.

Basic stuff like hinges is the same. I don't know where do you live but try to use Google for your country and check if you can find ?Hinge Bracket Set or Laptop Hinges for Toshiba Satellite T110?.

Check also eBay for your country.

https://forum.toshiba.eu/showthread.php?77566-Satellite-T110-121-broken-hinge-support-bracket
Relevancy 68.37%

My Toshiba T110 netbook came with Windows 7 home, 64bit preinstalled.
I have some critical applications which will only run under the 32bit version so I have to downgrade.

I have ordered a 500Gb hard disc to install the 32 bit version (keeping the original disc for returning to 64bit if required in the future, since no installation discs were supplied, just a recovery partition). My expected difficulty will be adding the Toshiba specific programs for activating eco mode, switching WiFi and bluetooth via function keys etc. and sleep & charge etc.

Are the installation files for these programs available somewhere? and if so in 32bit versions?

A:Satellite T110: Where to find Toshiba software for Win 64bit

Hi

Visit Toshiba support page and download area there and check what operating systems are support and what Toshiba stuff is offered for your notebook model.
http://eu.computers.toshiba-europe.com > Support & Downloads > Support Homepage > Drivers download

https://forum.toshiba.eu/showthread.php?59141-Satellite-T110-Where-to-find-Toshiba-software-for-Win-64bit
Relevancy 68.37%

It happens most of te times.
The webcam of my T110 fails to initilize, and a message appears saying that Web cam failed to initilize, please verify the device and restart the program (Web Camera Aplication) or the computer!

Other times, it works, but after a pop up appears on task bar saying that a unsupported USB device was detected and couldn't be installed!

This is anoying! Can anybody help me please?

Thank you.
Manuel Quinaz

A:Re: Most of times Satellite T110 webcam fails to initialize

Hi

Seems that the webcam software stopped working.
I think you should firstly try to reinstall this software.

Remove firstly the webcam software from the system.
Then clean the system and registry using CCleaner!
Reboot the notebook twice and run CCleaner several times to ensure that everything has been cleaned properly.
Then download the webcam software from the Toshiba European driver page and install it.
Then reboot the unit. Start msconfig (in RUN type msconfig) and go to Startup tab.
There you should uncheck mark from the webcam software. This will prevent the software from starting automatically. Reboot the unit.

Now if you would like to use the webcam go to All programs -> Toshiba -> webcam software and start it.

https://forum.toshiba.eu/showthread.php?53078-Re-Most-of-times-Satellite-T110-webcam-fails-to-initialize
Relevancy 68.37%

I have a 6 month old Satellte T110-11U running a manufacturer installed OS - Windows 7. Every time I start the computer I get an error message:
There as a problem starting , C:\ users\home\AppData\local\imagusud.dll , The specified module could not be found. I can ignore the prompt, but would like to sort it out.

Does anyone known how to resolve this issue?

A:Satellite T110-11U - Error message when starting computer

Hi

It looks like something would be corrupt in your user account.
Did you try to repair the OS or to clean the registry using CCleaner?

CCleaner is a free tool which cleans the registry and removes garbage from the HDD.
Try this.

Otherwise you can check the msconfig -> Startup tab.
There you should search for some entries containing the imagusud.dll file and could disable or remove this?

Good luck

https://forum.toshiba.eu/showthread.php?57706-Satellite-T110-11U-Error-message-when-starting-computer
Relevancy 67.94%

Hi,

I hope somebody can help me as it is driving me mad. Most of the time when I push down the silver on button nothing happens.

Sometimes if I push it rapidly it comes on other times I?ve got to hold my finger on it for a couple of minutes. To get it on. I seem to think it could be the switch its self . If so does anyone know where I can buy one from?

Many thanks ,,,,dino

A:ON/OFF button is not working properly on my Satellite A660-1H7

Such small parts and hardware components you cannot buy so easily. I presume the mechanism under the button must be replaced.

I have similar problem on my old Portege M800. It starts only if I press power button on certain place (upper right border). Just then can I hear ?click? noise and notebook starts properly. I presume you have similar problem, right?

Until now I didn?t open the notebook because I don't have maintenance manuals and don't want to damage anything.

Maybe you should contact nearest Toshiba service provider and ask for help. They can order right part and exchange it for you.

https://forum.toshiba.eu/showthread.php?81279-ON-OFF-button-is-not-working-properly-on-my-Satellite-A660-1H7
Relevancy 67.94%
Relevancy 67.94%

OK, I was using my Toshiba Satellite, and out of nowhere, the touchpad stops working completely. no buttons work or anything. I've run a virus scan, booted in safe mode, tried rolling back driver, tried updating driver, tried installing driver package from Toshiba... Nothing... Any ideas?

A:Toshiba Satellite C55-B5302 touchpad stopped working completely

Obvious question...but...did you hit the button or key combination that disabled the touchpad?

http://www.techist.com/forums/f84/toshiba-satellite-c55-b5302-touchpad-stopped-working-completely-275813/
Relevancy 67.94%

Hello "Toshiba"

After the update for Windows 10 I have a problem with the touch pad does not work and became come boiling Forum and found out that the solution is to uninstall "ELAN Input Device" from "Device Manager", finally worked the touchpad but alas multi touch properties like: "zoom/minimise scrolling gestures and two-fingered" no longer work

Please help me solve this problem Toshiba company

A:Satellite S50T-B950 - touchpad is not working after Windows 10 Update

Hi

I can't give you the perfect answer.
Howver, I can share my road to success:

In Win 8.1 - uninstall the ELAN package. The touchpad will continue to work, at least basic pointer-move and click.
Upgrade to Win10
In Win 10, reinstall the Win 8.1 ELAN driver.

That worked for me.

BR Tom

https://forum.toshiba.eu/showthread.php?84152-Satellite-S50T-B950-touchpad-is-not-working-after-Windows-10-Update
Relevancy 67.51%

Hi,

I'm trying to use the Web Camera that came with laptop, it's a Satellite Pro T110-11L.

It's running Windows 7 64 bits, and I've already tried to install web camera drivers for Windows 7 64 bits and even the XP version that Toshiba site has on drivers page.

Both web camera drivers fail when installing giving the error "DMICheck Application stopped working".

Can you help?

Thanks,
Hugo Figueira

A:Webcam driver fails to install using Win 7 64bit on Satellite Pro T110-11L

Hello Hugo

According notebook specification your T model was delivered with preinstalled Win7 64bit Professional. Original recovery image contains preinstalled webcamera software and it is set to start automatically so I would like to know since when you have noticed this problem.

I cannot imagine this problem persists from the day one. Am I right about that?

Do you still use original preinstalled OS?
By the way: THIS is the right webcam driver for your notebook model.

https://forum.toshiba.eu/showthread.php?65775-Webcam-driver-fails-to-install-using-Win-7-64bit-on-Satellite-Pro-T110-11L
Relevancy 67.51%

Help Very frustrated since I purchased external hard drive Western Digital WD external hard won't hard external Satellite T110 drive Toshiba Pro recognize drive Elements for complete backup as well as a complete Image of Toshiba Satellite Pro T hard drive of GB used -- using purchased NovaStor's NovaBackUp software -- so it can be moved to my next laptop Running Windows Home Premium operating system and all USB ports are fully functional but the software does not recognize a valid drive letter for the WD Elements Also Windows Explorer does not display any drive letter for this external hard drive However Windows plug amp Toshiba Pro Satellite T110 won't recognize external hard drive play worked since this WD Elements external drive appears as a device under Windows Devices amp Printers window when reporting on all peripherals It also reports under Properties as operational no updated device driver available when checked that My ladyfriend Lori has an HP-Compaq laptop which has no issues recognizing this as a valid device with an assigned hard drive letter She has USB ports like my Toshiba Satellite Toshiba Pro Satellite T110 won't recognize external hard drive Pro so the USB ready external drive WD Elements must be compatible with USB Could there be a USB port issue on my Toshiba Satellite Pro involving power volts watts amps that is somehow an issue when plugging in the WD Elements external hard drive If so is a possible workaround to use a Cross Over cable to connect my Toshiba with my friend's HP-Compaq where the external drive is available letter drive there and then use a LapLink software program to allow the computers to sync with each other so I can run the NovaStor NovaBackUp software for full backup amp imaging on my Toshiba thru her HP-Compaq to the external WD Elements external hard drive Any suggestions feedback advice or recommendations would be much appreciated I am a CPA and Enrolled Agent so my accounting career forces me to have some knowledge of personal computers but I am merely a Advanced Basic type with computer technology no geek training or desire to be one but admire geeks very much Thank You

A:Toshiba Pro Satellite T110 won't recognize external hard drive

When connected...is the external drive reflected in Disk Management?
 
Start/Run...type diskmgmt.msc and hit Enter.
 
Louis

http://www.bleepingcomputer.com/forums/t/505633/toshiba-pro-satellite-t110-wont-recognize-external-hard-drive/
Relevancy 67.08%

Brand new laptop running windows 8.1 Touchpad works for about 30 seconds after windows boots up then stops. Tried downloading latest drivers from Toshiba site but it didn't fix the problem. Tried the touchpad function keys but that is not the issue. Called Toshiba support and they suggested sending it in for a factory reset.

I also have a problem with AMD graphics going split screen after computer goes into a sleep state. Downloaded and installed latest drivers for this on advice of Tech support but not fixed either.

I'm a bit concerned as a search shows both these problems not uncommon and iv'e spent a lot of time copying over data and installing software, don't want to lose it and lose time waiting for factory reset if I have to send ot back.

Anyone have any ideas?

A:Satellite L855 and Win8.1 - Touchpad stops working after login window

Factory reset is best way to fix this but have you upgraded your machine following step-by-step instructions from http://www.toshiba.eu/innovation/generic/windows8_1-message/ ?

https://forum.toshiba.eu/showthread.php?73736-Satellite-L855-and-Win8-1-Touchpad-stops-working-after-login-window
Relevancy 66.65%

I have been paying off a Toshiba Satellite P50t-A to take to my sponsored student in Jakarta.

I have not opened it till today ( had for 20 months in dry clean environment still its box and find to my horror there is a problem with Windows.

it tries to automatic repair and it appears to work but every time I turn off and turn back on the problem is there again.
I know nothing about computers and am horrified to think my $1200 AUD is lost and my student will have no laptop that i am meant to be taking to him on 16th November.

Can anyone help me with my problem?

Thanking you in advance.
Pamela

https://forum.toshiba.eu/showthread.php?86546-Toshiba-Satellite-P50t-A-windows-system-not-working-properly
Relevancy 66.65%

I have problem with my external mouse and external keyboard. It started about 3 weeks ago. They freeze, jump or shutdown, most annoying is mouse, I need to reconnect it usually. It will work well about 1-5 min and again. Touch Pad works well.

I have installed newest Windows updates, also downloaded and installed drivers from Toshiba web. I set up default BIOS settings. Nothing helped.

I don't have recovery disk to try that. Is there any solution other then recovery/reinstalling system?

Someone had such problem?

A:External mouse and keyboard are not working properly on Satellite Pro C650

Hi

It is not easy to say much about this issue.
Do you use wireless devices? Are batteries OK?
Have you noticed the same problem using other USB devices?
I presume both devices uses USB port on your notebook.

https://forum.toshiba.eu/showthread.php?81491-External-mouse-and-keyboard-are-not-working-properly-on-Satellite-Pro-C650
Relevancy 66.65%

Hello,

I have a Satellite XC 250895Q. Windows 8 keeps giving me message my graphics card isn't working properly.
I go on the Radeon site and click on the appropriate boxes and let Radeon check my system to see if the drivers are current. It tells me I need to download something (?New driver) but when I do it tells me there is a problem with compatibility with my system.

I haven't noticed any problems with graphics.
It may be a Radeon problem, but what I got on my system is what got installed at the factory.

Thanks for any replie
Hetty

+Message was edited: model nr. added to subject+

A:Graphics Card isn't working properly on Satellite L850 PSKFWA

Just a bit more info after I tried again:
Radeon tells me: AMD Catalyst Mobility is the best driver for my system. After downloading and trying to install I get the following message:
AMD Catalyst Mobility cannot be downloaded due to incompatible hardware/software on your computer.
The version of your graphics adapter is not supported.
Please contact your notebook manufacturer for a graphics driver update.

https://forum.toshiba.eu/showthread.php?71501-Graphics-Card-isn-t-working-properly-on-Satellite-L850-PSKFWA
Relevancy 66.65%

Had this issue after upgrading Windows Bing to Windows Pro About - seconds after putting the computer to sleep the computer can't wake up again When switching the computer on after about seconds after putting it to sleep you can see Windows switching the computer off automatically In the system event protocol there is the message quot Das System wurde aufgrund eines kritischen thermischen Ereignisses heruntergefahren quot in englisch something like The system was shut down because of a critical thermal event followed by quot ACPI-Thermozone SoC Board Sensor quot and quot CRT K After some experiments I came to this temporary solution In the BIOS settings I disabled the quot Internal USB Controller quot setting - then sleep works properly This error only occures when on the Pro-version of Windows not with the original Bing-version Switching off the internal USB controller is not the ideal solution Is there a chance there is another solution I also already tried upgrading to Bios-version which didn't solve the problem

https://forum.toshiba.eu/showthread.php?84191-Satellite-Click-Mini-Sleep-is-not-working-properly-when-on-Windows-8-1-Pro
Relevancy 62.78%

Hello Everyone,

My problem started after updating windows 8.1 to windows 10, of course!
First the touchpad just stopped working, for no reason.

My solution was to uninstall the drive and restart the laptop. And from time to time I had to do this proceed. Two weeks ago windows updated, and the touchpad issue's gone. . Unfortunately, another one appeared.

The feature "mousekey", which is turn it on at ease access to use the numeric keys to use them as a mouse, It's turning itself on. And doesn't matter how many times I turn it off, few seconds and it's on again.

I've tried uninstalling the drive, which after windows the last updating was "ELAN".

Then I replaced by the Toshiba drivers, which is "Synaptic", and uninstalled the drives ,the problem is the same. Because of that, I can't use my numeric key, which is annoying!! If anyone can come up with something I will be grateful.

https://forum.toshiba.eu/showthread.php?89824-Touchpad-numeric-keyboard-touchpad-tuning-itself-on-Satellite-S50-B-15N
Relevancy 61.49%

Hello,

I have started using my nice new Satellite T110-12. How can I create a recovery disk?

Why there is a frequent message about vibration has been detected, hard drive head disk has been moved to a safe position? Is there something wrong? Should I return it before the week is up?

Please answer, many many thanks!

A:Satellite T110-121 - Question about recovery disk and hard disk

Hi LindaMon,

> How can I create a recovery disk?
What about reading your user manual?
You need an 8GB USB stick for creating a recovery medium and preinstalled Toshiba recovery disk creator.

> hard drive head disk has been moved to a safe position?
Yes, that?s normal and everything is ok with your notebook. Your HDD will be protected by HDD/SSD Alert utility that is a nice feature from Toshiba to avoid head crashes and can enhance the life of internal HDD.
But yoou can disable these notifications if you want. ;)

https://forum.toshiba.eu/showthread.php?56539-Satellite-T110-121-Question-about-recovery-disk-and-hard-disk
Relevancy 54.18%

ok so i got a new compaq pc and my old polkaudio speakers wont work! does anyone no what the problem is? i no that they are connected properly, and the volume is cranked to the fullest and all sounds still play quietly. the speakers worked properly on my old pc though.
 

A:speakers not working properly, sound is very low, connected properly, please help!

I think...

1.You may have accidently adjusted you sound configuration settings.
2.You may not have the correct sound Drive (Or none at all). If so check your sound card and browse the web for installable driver (The acctual drivers don't cost anything)
 

http://www.techspot.com/community/topics/speakers-not-working-properly-sound-is-very-low-connected-properly-please-help.66605/
Relevancy 53.75%

Yesterday I purchased the HP 15-AB521TX and quite happy with it , except one thing. The touchpad right bottom side is not alligned properly with the laptop surface (It is actually little below the surface) and I can feel it clearly when the border between touchpad and surface is touched with a finger. Because of this when I right click the touch pad goes too low and I feel like I am pushing  the touchpad too deep, but the right click works fine without any issues. Is it some problem to be worried about and ask for a replacement / repair? The left side is perfectly fine.

http://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/Touchpad-right-bottom-side-is-not-alligned-properly-with-the/td-p/5652370
Relevancy 53.75%

I have Lenovo G50-80 (80E5) Laptop with Intel® Core? i3-5005U Processor (2.00 GHz) Processer,My laptop Have 4 GB Ram and 1 TB Hard disk (Windows 7 32bit OS).My Laptop touchpad work fine when used on the bettery, but when i plugged in charger touchpad was not working properly and mouse working perfect, when i unplug my charger mouse and touchpad work proprely. I trid to reinstall touchpad driver many time from Lenovo and synptics website but problem was not solvedi have no other power supply to try.
 
Mod's Edit: System model added to the front of Subject line to improve visibility / clarity.
 

https://forums.lenovo.com/t5/Lenovo-B-and-G-Series-Notebooks/G50-80-Laptop-touchpad-doesn-t-work-properly-while-charging/td-p/3395981