Hello , Maybe its a stupid question I recieved a Z600 desktop pc .2x Intel® Xeon® Processor E5606 4C 2.13 GHz, 80W, 8M cache,4.80 GT/s QPI, DDR3 1066MHzQuadro 4000And 8 gb ram I know i will not be able to run the latest games with those specs . But what if i would install for example 2x x5570 toghether with gpu gtx 750 or 760. Would i be able to play games like dark souls 3 , battlefield 4 , .... Is it still worth to put some little money in it , max 150euro ? Its just that i watched this video on youtube and he is able to play the witcher 3 ultra settings .https://www.youtube.com/watch?v=8LfW366E9fw
I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.
I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.
You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)
That is still a great workstation, and you can upgrade it nicely. Read this entire thread, and be happy you have been gifted a "revision 1" motherboard that has higher capabilities than the original motherboard. Link is here. http://h30434.www3.hp.com/t5/Business-PCs-Workstations-and-Point-of-Sale-Systems/CPU-Upgrades/td-p/5... Google Z600 QuickSpecs, and the top one will be about version 7 but the next one will be about version 51. Those reflect the original versus revision 1 motherboard. The SSD I recommended in the above thread is the one to get. A fresh W7Pro64 is the way to go. You can upgrade processors, but if the Max TDP for the one(s) you want is over 95W then you need to make sure you have a "Perfomance" heatsink/fan over it. The search bar in this forum directs to this forum only. You'll need to spend some time. Note that you should only install a processor from the list in the QuickSpecs later versions to max out your performance, though you can use the older ones too. These are still new enough and in demand..... two fastest "revision 1" category processors will not be cheap even used off eBay.http://h30434.www3.hp.com/t5/Business-PCs-Workstations-and-Point-of-Sale-Systems/Z600/td-p/5590293
I just finished setting up my new to me Z with x E CPUs and gb of ram the ad said gb but it actually had x gb and x gb nbsp nbsp I have done some reaseach on this forum already and I got lucky with the later version of the motherboard I have gb of ram on the way and Z600 me to New plan to explore CPU upgrades New to me Z600 as funds allow nbsp nbsp Couple of things I am wondering about at this point nbsp nbsp The power button LED does not seem to light up I New to me Z600 saw refernce to this issue somewhere and they maybe burnt out Unless there is a BIOS setting I am missing this seems like the only plausable cause The machine seems to work as it should nbsp I am missing the top trim grill and the rear handle I think it was mounted in a rack Its a minnor thing but I'd like to replace if I can I have come up with P N nbsp - is this correct I found one on ebay with a suspect picture does anyone know of any other sources I have searchedhttp://h30434.www3.hp.com/t5/Business-PCs-Workstations-and-Point-of-Sale-Systems/New-to-me-Z600/td-p/5788493
i've got a new to me z600 workstation. Looking to upgrade it for video editing. Currently it's running windows XP pro, looking to upgrade that. Currently it has a X5550 chipset( single) 3gb ramCurrently it's running dual 160gb hd's Looking to upgrade the CPU's dual processors, largest possible. and max out ram (24gb) What should I use?Hard drive, looking to install a SSD Any help is appreciated
I am working on a Z600 project right now, so this is timely. You will need to use the search box on this page upper left area, which searches this forum only. 1. First step is to see if you have an original motherboard or the later "revision 1" motherboard. Best way to tell is if you look up the boot block date in BIOS, under the first tab. The boot block date tells you if you have original or revision 1 most easily. 2. Assuming it is the better later motherboard, then you need to find the latest Z600 QuickSpecs.... its in the 50s, maybe 51 or 58. From that you can look at the HP supported processors. Your memory should be the faster 1333 type but most of those processors listed there run slower than that. 3 run at the faster speed which will let your memory run faster too. You can choose from those 3 for the best heavy lifting. Note that the fastest quad core is faster than the fastest hexacore. So, if you want raw speed I'd bet the quad core would serve you well. If you want 12 rather than 8 total cores then go with the fastest hexacore. I use the Noctua thermal paste. We have had good success with used processors off eBay for these types of workstation upgrades. 3. You'll want 2 processors, and you'll want to match to the heatsink/fan you already have. 4. I believe you don't need a "performance" heatsink for 95 watt processor.... the motherboard wants one for processors that are over 95 watts, from my reading. There is a way to spoof a motherboard into thinking it has a performance heatsink attached when it only is a mainstream, by the way. 5. SSDs.... I have been very pleased with the Intel 320 series 300GB SSD that you can get off eBay. We use a lot of those.... rock solid, and the Intel Toolbox is great for tuning it. That workstation is a SATA Gen II one, and HP warns against using SATA Gen III HDDs in those unless they are sourced from HP (assume special HP firmware applied). We have not seen a comment from HP on whether this rule holds also for SSDs, but I am assuming so. Hence, I choose to use that particular SSD, and also have used HP-sourced Gen III SSDs in our SATA Gen II workstations with zero problems. The Intel 320 series SSD is a SATA Gen II drive with enterprise features, and has served us very well. Even used off eBay they almost always have had 100% life left in them. I update their firmware as needed via the Intel Toolbox. 6. We use W7Pro64 mostly, but I have been pleased with the W10Pro64 OS. You can upgrade to W10Pro64 for free at this time, so I have been "W10 activating" all my xw and Z workstations and having that ready for the future, but still mainly running them with W7Pro64. Once your box is W10 activated you can install W10 anytime later. You certainly want a 64 bit OS. 7. You need a second processor to take advantage of the second set of 3 memory slots..... ideally you'll run with 6 x 1GB, 6 x 2GB, or 6 x 4GB. The sweet spot for $/GB is with the 2GB sticks. Having them all the same size gets you a speed benefit too.... Look at official HP sticks for that on eBay and you also can find the same codes from other vendors such as Dell. I consider the HP sticks the best because they have been "binned" for quality. 8. HP just came out with a new BIOS for the Z600. It is best to update BIOS from within BIOS. I have gathered best HP driver sets for W7Pro64 from later HP workstation sources and they load fine on the Z600, but for W10 I've been using what comes from the autoload from MS. 9. I like to add in a quality eSATA backplane adapter to the bottom opening for fast backup and Acronis image captures. I also like to add one of the TI-based HP USB3 cards into the top PCIe slot, and am working on a nice use of that ... Read morehttp://h30434.www3.hp.com/t5/Business-PCs-Workstations-and-Point-of-Sale-Systems/z600-upgrades-CPU-HD/td-p/5604870
Xin chào. Em có con z600 ver 1.01 không ch?y ???c chíp e5620. Xin anh chi giúp ?? cho em.http://h30434.www3.hp.com/t5/Business-PCs-Workstations-and-Point-of-Sale-Systems/Z600-kh%C3%B4ng-ch%E1%BA%A1y-%C4%91%C6%B0%E1%BB%A3c-E5620/td-p/5663057
Hello nbsp nbsp nbsp nbsp I have a HP Z and love the machine nbsp It currently has nbsp nbsp Dual Xeon E Ghz nbsp Processors can HP V1.0 I Z600 Mobo do? with What - GB Ram nbsp Evga Geforce SC nbsp Lately I have been gaming a little on the machine because of the HP Z600 - with V1.0 Mobo What can I do? card I have installed nbsp However I am noticing slight performance issues with the machine nbsp I am assuming the processors at this point nbsp DUe HP Z600 - with V1.0 Mobo What can I do? to the fact all spec testing coming back and saying the processors are the minimum requirement's nbsp for allot nbsp of the games nbsp BF GTA Doom nbsp Don't get me wrong nbsp Doom plays amazing on this machine on nightmare ultra settings on a screen nbsp However there is some slight shuttering and hiccups here and there nbsp I have read so many different answers to this question and hope I can get a more direct answer nbsp With a Z V HP Z600 - with V1.0 Mobo What can I do? motherboard what are my faster Xeon processor options nbsp nbsp I would like an X however my understanding is that may not be a possibility nbsp with my older MB I have something like V bios software installed nbsp Or am I looking at a processor like the X nbsp nbsp Thank you for the input nbsp nbsp nbsphttp://h30434.www3.hp.com/t5/Desktop-Hardware-and-Upgrade-Questions/HP-Z600-with-V1-0-Mobo-What-can-I-do/td-p/5769174
Hi everyone nbsp I've got a couple questions im not a very tech savy person so I tried to research as C2 for Z600 Upgrade much as I could nbsp st Question nbsp I would like to upgrade my z ram to gb which I read is the max amount of ram I can have also read that needs to be ECC Registered memory so I found this and I would like to know if it's the right option nbsp http www ebay com itm Server-RAM- GB- x- GB-PC - R-ECC-Registered- MHz- - v- Upgrade for Z600 C2 pin-Memory- nbsp nd Question nbsp Im interested in getting an USB pcie card but since this computer has been out for quite a long time im not sure if the card is compatible as I read thunderbolt cards are not compatible so this is the next best thing I found nbsp http www ebay com itm nbsp I would really appreciate any help I can get nbsp Thanks in advance and excuse my english not a native speaker
Heya there, this link might answer your 2nd question http://h30434.www3.hp.com/t5/Business-PCs-Workstations-and-Point-of-Sale-Systems/PCIe-SSD/td-p/55733...http://h30434.www3.hp.com/t5/Desktop-Hardware-and-Upgrade-Questions/Upgrade-for-Z600-C2/td-p/5484111
I have the following HP Z and I want to upgrade the CPU from the Z600 upgrade CPU current Intel Xeon E nbsp to E E or X processors The two basic questions I have nbsp are nbsp Is nbsp that possible If so what exactly do I have to do Implicit in those two questions are nbsp Will the chipsets on the motherboard will support the newer processors Will the current heatsinks for the E CPUs work or will it be necessary to replace them Thanks nbsp Bob nbsp ------------------------------------------------------------- nbsp ComputerModel HP Z Workstation C XSerial Number UA Chassis HP Mini TowerMainboard HP AE Z600 CPU upgrade hSerial Number UA BIOS HP G v NUMA Support Z600 CPU upgrade Unit s Total Memory GB ECC DIMM DDR nbsp Z600 CPU upgrade ProcessorsProcessor Intel R Xeon R CPU nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp E nbsp GHz C GHz GHz GHz IMC x kB L MB L Processor Intel R Xeon R CPU nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp E nbsp GHz C GHz GHz GHz IMC x kB L MB L Socket Slot FC LGA nbsp ChipsetMemory Controller HP Tylersburg- D I O Hub x GHz GHz Memory Controller HP Xeon Nehalem UnCore x GHz GHz x GB ECC DIMM DDR GHz -bitMemory Controller HP Xeon Nehalem UnCore x GHz GHz x GB ECC DIMM DDR GHz -bit nbsp Memory Module s Memory Module Freescale Motorola KSF AZ- G K GB DIMM DDR PC - U DDR - Memory Module Freescale Motorola KSF AZ- G K GB DIMM DDR PC - U DDR - Memory Module Freescale Motorola KSF AZ- G K GB DIMM DDR PC - U DDR - Memory Module Freescale Motorola KSF AZ- G K GB DIMM DDR PC - U DDR - Memory Module Freescale Motorola KSF AZ- G K GB DIMM DDR PC - U DDR - Memory Module Freescale Motorola KSF AZ- G K GB DIMM DDR PC - U DDR - nbsp Video Adapter ASUS R X Series CU SP SM GHz GB DDR GHz -bit PCIe x nbsp Graphics ProcessorOpenCL GP Processor ASUS R X Series SP C GHz GB DDR GHz -bit Compute Shader Processor ASUS R X Series SP C GHz GB DDR GHz -bit nbsp Storage DevicesGB C GB SATA MB Cache GB CWDC WD FAEX- BA TB SATA rpm TB E F G HWDC WD FAEX- BA TB SATA rpm TB D IASUS nbsp nbsp nbsp BW- D HT SATA BD-RE DVD -RW CD-RW MB Cache N A Z nbsp Operating SystemWindows System Microsoft Windows Ultimate Service Pack Platform Compliance x nbsp Solved View Solution
Bob, Correct Prefix of these processors is (x5650, x5660 and X5675) Model No Part No x5650 WG731AA x5660 WG732AA X5675 LB215AA I have also mentioned technical information below what these prefix's means, Letter Prefix:X = PerformanceE = Mainstream (rack mount)L = Power OptimizedW = Workstation for up to 2 processors per motherboard. The letters also refer to the power consumption figures of the CPUs in question. Note that the numbers associated with the letters are for the "Nehalem"-based Xeon family and older Xeons that use the letter designations have different TDP values associated with the letters. L = Thermal design power (expected power draw with a 100% CPU load running normal software) of 60 watts or less. These are the "low voltage" chips. E = TDP of 80 watts. Intel refers to the Xeon 5500/5600s with this letter prefix as the "basic" line and as a result, the idle power draw on these chips is frequently worse than any of the other series of chips, despite the other chips possibly having a higher full-load power draw. X = TDP of 95 watts. These are the "premium" mainstream chips as their TDP is not so excessive that they are difficult to cool in a rack server, yet their idle power consumption is far lower than the E-series chips. W = TDP of 130 watts and higher. These are the fastest, hottest Xeons made and they are designed to be used in workstations and pedestal servers with better cooling than an average 1U or 2U rack server. ========================================================Although I am an HP employee, I am speaking for myself and not for HP.========================================================**Click the KUDOS star on the left to say 'Thanks'**http://h30434.www3.hp.com/t5/Business-PCs-Workstations-and-Point-of-Sale-Systems/Z600-CPU-upgrade/td-p/5053635
Hey there! I got a later spec Z600 WS here that came with dual X5650 (TDP 95W).I made a good deal and got two X5680 (TDP 130W), and tryed to install those to the WS.System tells me, that the CPU installed needs too much power, and the System got halted. Is it a Problem with the Heatsink, because of the fact, it is to small (for TDP <95W), or is itrealy the mainboard, that just can't take the X5680 Xeons?I googled a lot and found some Z600 running on those CPUs, so what's the deal? I already tryed to bridge Pin 1 and 5 of the Heatsink-Fan Connector to simulate a Performance Heatsink,just to test if it would boot, but that did'nt work.
First, I don't see your new processor type listed in the latest QuickSpec for the Z600 I looked up this morning..... version 51, which lists your current X5650 but not the X5680. There is a hot X5647 listed (at 130W max TDP) but the other higher performance processors are all 95W. So, there must have been a 130W cooling option for the Z600, and I'd presume it is the same as used for the Z800 (see below). Also, the Z600 must be able to provide 130W to each of its two processor sockets. I checked with the Z800 QuickSpecs (v56) and don't see the X5680 listed there either. The latest QuickSpecs, however, often do not list all processors that were listed previously. The now-unlisted ones will still work, and you can go back through the HP QuickSpec archives for your Z600 to see if the X5680 was ever officially listed. If it was then it surely should work. A HP engineer I trust fully has let me know that there are some cases in which a processor that was never officially listed will work. Let's just say that will be a rare exception. Maybe you have found one of those processors? The X5680 processor has only one sSpec code, SLBV5, and can be bought new now from Intel for $1663.00 each. On eBay you can buy that processor today for about $200.00 each, USD, used. It is encouraging that you can get to the point of boot that the motherboard rejects your heatsink/fan combination, because my experience with truly non-listed processors is that they won't even get to that level. Flat zero progression into boot. So, I'd buy one of the "Performance" heatsink/fans from eBay, and the Alan guys there have almost 450 in stock at a fair price, new. That is a US source, and I have bought from them in the past many times, with never a problem. Buy one for about $50 and test with that and a single X5680 in place. The wiring trick..... that jumper wire should work if HP is using the same motherboard sensing method for detecting presence of a performance heatsink/fan as was used in the xw8600, but who knows? This performance boost is worth spending $50.00 more on at this stage of the game to get an official Performance heatsink/fan to experiment with. For example, perhaps HP added to the motherboard the ability to detect the larger 92x92x15mm heatsink fan rather than the regular heatsink's 80x80x15mm fan. Take a look at this link, for more details on the Performance heatsink/fan that I believe you need. Those have been available on eBay for a fair price, new and you can find that via searching for part numbers 463991-001 and 535588-001: Z800 Performance heatsink larger fan Here's a picture of the performance heatsink/larger fan for the Z800, and likely exactly what you need for your Z600 project. All my references indicate these are identical, but the Z400 performance fan is different. Note how this heatsink/fan is shifted leftward on its mounting plate, when viewed from front (the fan side). The Z400 performance heatsink/fan is not shifted leftwards because it is a single socket motherboard and has a fair amount of room around it on both right and left sides. Thus, the performance Z400 heatsink/fan will not fit on the primary socket of a Z600 but this one below will. The performance Z400 heatsink/fan will however fit on the secondary socket of a Z600 with a little bending down of its rear air deflector plate at its bottom. You can see pictures of that Z400 performance heatsink/fan elsewhere in the forum. I'd make sure you have the latest BIOS installed, and also confirm in BIOS that you have the latest revision of the motherboard by checking the boot block date. It sounds like you'll have already done all that. If one of those X5680 processors works then the other will ... Read morehttp://h30434.www3.hp.com/t5/Business-PCs-Workstations-and-Point-of-Sale-Systems/Z600-with-dual-X5680-CPU/td-p/5082965
I would like to know if the Z600 will support the 3.1 USB adapter card and if so, what do I need for an installation?
Agree.... that card should work in a Z600, but will it work to the USB 3.1 10Gbps speed standard? No. The HP Z600 workstation has no PCIe generation 3 slots. It has 3 PCIe Gen2 slots, 1 PCIe Gen1 slot, and 2 PCI slots. Below is a link to the HP page describing the Z600's slots: http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c01719695 Here is a note from StarTech regarding their card's speeds, emphasis added: "The maximum throughput of this card is limited by the bus interface. PCI Express Gen 1.0 max throughput is 2.5Gbps. PCI Express Gen 2.0 max throughput is 5Gbps. PCI Express Gen 3.0 max throughput is 10Gbps. The available bandwidth (10Gbps) is shared equally between the two ports." These USB 3.0/USB 3.1 PCIe cards generally need power supplementation.... the +5VDC they need does not come up from the slot, but it is easy to find a 4-wire "molex" peripheral-to-SATA power adapter which can provide you the higher wattage 5VDC they need to meet potential power draws (versus what USB 2.0 needs). All this info came from research figuring out how to add the Texas Instruments based HP USB 3.0 card to our xw6600 workstations, which have 2 PCIe Gen2 slots (the rest are Gen1). Z620 gives you some PCIe Gen3 slots.... slots 2,4 and 5. Here's the Z600 slots diagram:http://h30434.www3.hp.com/t5/Business-PCs-Workstations-and-Point-of-Sale-Systems/Usb-3-1-adapter-in-a-Z600-workstation/td-p/5693335
I have this product but after updating my computer to W7 ı have a problem with it. The original cd refers to Xp , 2000, 98 but now for W7 it says " it ' s not suitable for your system.
I ' m looking forwart to hearing news from you
Here is the Windows Vista Driver if you want to attempt to use it.
Lexmark - United States
Also as far as a Windows 7 driver here is what I saw on their website:
Cannot find MS Windows 7 printer driver; Unable to locate driver
Lexmark is in the process of preparing for the launch of the new Microsoft Windows 7 operating system.Driver Availability
In the weeks leading to consumer launch of Microsoft Windows 7, Lexmark will publish the type of support expected and the timeframe in which drivers will be available. Lexmark is currently finalizing Windows 7 support for a variety of its existing products. The list of products which will have Windows 7 support at launch is available in the links below. Windows 7 Business Products
Windows 7 Home Office and SMB Products
Operating System Driver Support
Some printer models will have native easy-to-install printer drivers embedded in the operating system's driver library. Lexmark is providing a wide variety of printer drivers to be included with Microsoft Windows 7.Driver Delivery
Drivers will be available for download from support.lexmark.com , and recently released printers may have the Microsoft Windows 7 driver available on the Software and Documentation CD provided in the box with the device, or a combination of both driver delivery methods will be available.Future Products
Starting in 2010, all new products will ship with Windows 7 support.
So im trying to upgrade to 2 X5650s but it wont boot. I updated the bios to 3.57 and at least the 2 80mm fans dont go crazy but still no boot. The manuals online say its compatible. Thanks for any help Model Z600 (FW863AV)Z600B/ZC2.66+/L160/W4.0/295+a/p
What is your boot block date, from BIOS?http://h30434.www3.hp.com/t5/Business-PCs-Workstations-and-Point-of-Sale-Systems/Z600-X5650-upgrade/td-p/5532857
I have just upgraded to windows 7 (from Vista) and now I can't print. I have a Lexmark Z600 and although I did have problems getting the driver loaded & working with Vista, it did finally work. After upgrading to windows 7, I reloaded the printer driver to no avail. I even deleted it and went out and found the latest driver available for my printer and still no help. Any ideas ?
I gave up trying with my X74 All-in-one in the end.
Lexmark website was very definite XP was last driver release.
I never had vista.
Bought Canon MP 250 All-in-One then from Argos at £34.99 which I am very happy with. Although I dont do an awful lot of printing.
And mostly convert colour web pages to print in Grayscale.
(to save on colour cartridges)
The printer is quite noisy at start of printing as it resets heads and loads a page of paper, but quiet enough during printing.
Hi, Description explains it all, I've been thinking of replacing my current HDD for a SSD. I haven't done much researching on this myself but thought I would check here just encase there's any known issues/pit falls with installing a ssd into z600 workstation, I will be looking at adding a 1TB ssd. 1. Installing hardware? the z600 3.5 inch caddy wouldn't house an SSD, do HP sell brackets which will fit the z600 ? 2. Compatibility with the workstation? are there types of SSD which are best suited for z600 workstations? 3. Installing and set up? is it as straight forward as plugging in the SSD via SATA cable and installing the OS? Any Bios tweaks? Any info would be appreciated, Griff
Installed a Samsung Evo 500gb SATA III into my z600..and it works perfectly. Installed it last week and have been installing programs and having general use from it with no problems. I wanted to test it properly before posting a response. It could be possible that i experience issues with it later, but I would of thought that if it had any issues I would know about it by now. My SSD reads at 282 MB/s and writes at 270 MB/s - Random Read 51612 (IOPS) Random Write (IOPS) 47395. Being a SATA II gen workstation its not reaching the SSD's full potential at 540/520 Mb/s read write but from what I've read you wouldn't even notice the difference its so fast.. and I agree CC suite, mozilla, (haven't installed 3dsmax yet) all boot in seconds compared to minutes on old HDD. Just to note I didn't use a HP recovery disk to reinstall OS. I used an official windows 7 .iso and booted from USB (even though it some has some useful things, i didn't want HP bloatware) Drivers installed perfectly without a hitch. Windows serial on bottom of tower 1. Installing hardware? the z600 3.5 inch caddy wouldn't house an SSD, do HP sell brackets which will fit the z600 ?" Via Scott's comments, look for the 'needs-tool' version in the post's above, mine cost £8.50 and takes all of 5 seconds to fit the ssd to the z600. I wouldn't sugguest buying the tool-less version.. unless you have no hands and lots of money." 2. Compatibility with the workstation? are there types of SSD which are best suited for z600 workstations?"Yes they're HP approved SSDs detailed in the post's above, but I've had no issue with consumer grade SSD, but you roll the dice with which brand. The Samsung EVO 500gb, no problems. You can use SATA III ssd's but you can get issues as warned by HP as their firmware doesn't support some types (so basically if it doesn't work they wont help you) ". 3. Installing and set up? is it as straight forward as plugging in the SSD via SATA cable and installing the OS? Any Bios tweaks?"Make sure your BIOS is set to RAID+AHCI (Mine was already setup like this). I used the samsung magician tool after install and it will say that your PC is not set to AHCI, but i just ignore it. As long as BIO's and firmware are up to date you will be fine. Use a blindmate formfactor to install the ssd (see above posts). Make sure you get the latest firmware on a usb before you install SSD, it should be the first thing to check after installing the SSD. You don't need to change SATA cables from II to III as the cables are backwards compatible.. either way having a SATA III in a z600 will just limit you to SATA II speeds (which compared to a normal HDD are ridiculously quick). Just plug-in and install OS. It may be worth reading up on SSD optimistation, the samsung magician advises some things to do but not all neccessary, its either lifespan over performance.. defintely worth reading up on, if this is your first SSD as it was for me." Hands down best upgrade i've done to my workstation, and very simple to do. I'm glad I waited for better support and for the cost to go down on SSD's before using them. Want to say a big thanks to Scott Harrison for his help on this subject. I pestered him lots but have really appreciated his guidance! cheers Scott and anyone else who posted help. Enjoy your SSD, I will. Griffhttp://h30434.www3.hp.com/t5/Business-PCs-Workstations-and-Point-of-Sale-Systems/installing-a-SSD-into-Z600-Workstation/td-p/5081717
Hi,I would like to know if I can install a Geforce GTX 1080 in a z600 workstation?My power supply is 650W so that seems to be enough. I have 2 * 6 pin connector so I guess I can add an adapter to 8 pin. Would this work? Thanks.http://h30434.www3.hp.com/t5/Business-PCs-Workstations-and-Point-of-Sale-Systems/HP-Z600-amp-Geforce-GTX-1080/td-p/5846991
Hello guys,I bought a used hp z600 six month ago and it works perfectly so far. However, i realized that the blue led of the power button doesnt work and has never been on in my machine. I wonder if there are software or hardware solutions to make it work again ? Bios options or cable fiddling ? Thanks in advancehttp://h30434.www3.hp.com/t5/Business-PCs-Workstations-and-Point-of-Sale-Systems/Z600-No-blue-power-led/td-p/5590330
We have a number of HP Z600 workstations that were upgraded with additional memory. After rebooting the system reports:207-Incompatible DIMMs detected slot CPU1 DIMM1203-Memory module failed self-test and the failing rank was disabled slot CPU1 DIMM1.The BIOS indicates DIMM1 as ERRDiagnostics show the memory module at the correct size and speed but its part number does not fully populate.When the DIMM is removed the system still reports the 203/207 error.I have tried to update the BIOS with the latest version, apply default setup and clear CMOS but the device still reports an error with DIMM1 (populated or unpopulated). All other DIMMs work fine.http://h30434.www3.hp.com/t5/Business-PCs-Workstations-and-Point-of-Sale-Systems/HP-Z600-Workstation-203-207-Memory-Fault/td-p/5829718
I wish to find a suitable cooler for my HP Z600.The original part it is no longer available.In fact I wish to change both of them, the original one it is already 5 years old.So if you have some experience , maybe you can help me.Bolt connection it is a square 80 mm.The spring bolt a 3mm?The original cooler has a height of 95mmThe space to insert the cooler, betwen socket 0 and 1, it is also different.From my point of view even U3 cooler it is too big.
Try eBay: http://www.ebay.com/sch/i.html?_from=R40&_trksid=p2050601.m570.l1313.TR0.TRC0.H0.Xz600+heat+sink.TRS... /Rogerhttp://h30434.www3.hp.com/t5/Business-PCs-Workstations-and-Point-of-Sale-Systems/Cooler-Xeon-5500-HP-Z600/td-p/5145718
hi guysi'm an engineering student and a graphic designer so i need a workstation to get my work done . actually i'm a huge fan of Apple Mac but buying Mac Pro will cost me more so i've decided to go with HP solution i gan get used HP Z600 or Z800 and customize them i've a question does any one of them support PCEi SSD or i've to go with Z620 ?http://h30434.www3.hp.com/t5/Desktop-Hardware-and-Upgrade-Questions/does-HP-Z600-or-Z800-Support-PCIe-SSD/td-p/5815710
Ladies, gents, I recently got a refurbished Z600 workstation and immediately noticed that the chipset fan is always running at approx. 2,500 rpm, even right after a cold boot and when idling. I can't image that this is normal - all the temperatures are fine, so I see no reason for the fan to spin this high. I know that it is a small fan which needs the high rpm to create sufficient air flow, but 2,500 rpm seems excessive. Has anybody experienced this before? Is this in fact the normal idle speed for the chipset fan (as the seller's customer service wants to make me believe)?http://h30434.www3.hp.com/t5/Desktop-Hardware-and-Upgrade-Questions/Z600-Chipset-Fan-Always-Running-on-High-RPM/td-p/5592042
Hello there nbsp i'm happy user of HP Z with quadro inside right now i'm changing the way i work with d - by doing more and more graphic card Z600 HP upgrade real time d rendering using Graphic card power via the octane render software solution HP Z600 graphic card upgrade i plan to upgrade my GC i got solutions and questions about each one nbsp solution nbsp the existing quadro nbsp a new quadro using SLIQUESTION does SLI works with quadro in a HP Z nbsp solution nbsp the existing quadro nbsp a new quadro QUESTION does the HP Z support differents cards nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp does the quadro can be sloted inside a HP Z i think the quadro has a larger size nbsp solution nbsp the existing quadro nbsp a Geforce GTX TITANQUESTION does the HP Z support differents cards nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp does the Geforce GTX TITAN nbsp can be sloted inside a HP Z i think the Geforce GTX TITAN nbsp has a larger size nbsp thanks
The Z600 QuickSpecs indicates you can only have a single high end graphics card in the Z600. That is either one Quadro 4000 (142W) card or one Quadro 5000 (152W) card or one FirePro V7900 (<150W) card can be installed in the Z600. However, you can have two Quadro 2000 (62W) cards or two FirePro V5800 (74W) cards or two FirePro V5900 (<75W) cards in the system as this is supported (not that this will help with your graphics processing needs). The Z600 Maintenance and Services Guide also states you can have one 150W graphics card in either PCIe slot 2 or 4 (leaving the adjacent slot empty) OR you can have 2 75W graphics cards in PCIe slot 2 and 4. So SLI or crossfire is not a supported configuration with high end 3D cards due, in part to the 650W 80% efficient HP proprietary PSU used in the Z600 (which can't supply the needed power) and in part to the lack of system cooling validation for these more powerful 'heaters'. And as the HP PSU is a proprietary design, it is not a simple swap to an of the shelf standard ATX supply. Some cabling modifications would be needed and it still may not mechanically fit or work (as others have experienced no boot issues when attempting to use a modified standard ATX swap in their HP workstation - some have even damaged their system board so be warned). As for mixing cards in SLI configuration, IIRC, Nvidia allows mixing cards from the same family. So, presumably a Q4000 & Q5000 would work as would a GeForce 760 with a Titan, should the PSU have supported the load (which it doesn't). Mixing Q4000 with GeForce Titan in SLI configuration will fail as they would be considered a different family. And you can't use a Quadro driver with a GeForce card or a GeForce driver with Quadro card which creates a driver issue if you try such SLI mixes. So you may need to buy a more capable system (or do some development work to find a more powerful HP PSU you can fit into the Z600 or instead modify a standard ATX PSU to fit and resolve any issues this creates while also modifying the Z600 chassis cooling system to better cope with the extra heat). Good luck. [edited to add underlined text]http://h30434.www3.hp.com/t5/Business-PCs-Workstations-and-Point-of-Sale-Systems/HP-Z600-graphic-card-upgrade/td-p/5054360
I have a problem during installation,
after windows copies setup files and right before the beginning of the installation wizard, a color test striped pattern (Red, Green, Blue, Gray) keeps blinking and the installation STOPS.
Any suggestions ?!
Where did you get the Ultimate install dvd from, sounds bad.
Just reboot, see if the install will finish.
We have a Z at my workplace which powers off unexpectedly after some time usually a few hours I have not been able to catch it happening but I come back to the machine and it is powered down nbsp I have done a bit of investigation so far but have not been able to get to the root of the problem - Updated bios problem still occurs I saw mention of bios updates fixing an unexpected poweroff problem - Checked temperatures during stress testing seem normal rules out heat problems - Tried removing extra HDs still get poweroff I suspected bad power supply - Tried MemTest still get poweroff indicates that it is not an OS software problem I have not seen any failures detected by memtest - Looked blink codes on the Z600 Troubleshoot workstation: poweroff unexpected LED on the back of the PSU after a shutdown LED does not blink nbsp I got this info from here nbsp http h www hp com hpsc doc public display docId emr na-c N F My next step nbsp would be to try swapping the power supply from another known working Z machine which we have nbsp It looks like a straightforward operation although the machines have different CPU configurations CPUs in Troubleshoot Z600 workstation: unexpected poweroff the problematic machine vs CPU in the Troubleshoot Z600 workstation: unexpected poweroff good machine - perhaps the capacities are different nbsp Can anyone suggest any other troubleshooting steps to take before I nbsp put it in for service nbsp Thanks in advance nbsphttp://h30434.www3.hp.com/t5/Desktop-Hardware-and-Upgrade-Questions/Troubleshoot-Z600-workstation-unexpected-poweroff/td-p/5727701
I am the recent owner of a new to me nbsp Z with the C revision motherboard nbsp Specs are pretty basic with one E GB x gb unbuffered ram a gb SATA HD a DVDRW and a single NVIDIA Quadro nbsp The machine posted the first two times without incident and I booted a live CentOS CD and everything was working fine so I installed it and everything went perfectly nbsp In fact I can't recall such an easy linux install ever nbsp Then I rebooted again and Z600 cmos cannot reset compute. after enabling entered the BIOS to enable hyperthreading nbsp While in the BIOS Z600 cannot reset cmos after enabling compute. the genius in me could not help but play around nbsp At some point I enabled compute for both of the x slots nbsp I know I know big mistake nbsp When I rebooted again I was introduced to the six beeps of death nbsp To me enabled meant allowed not mandatory nbsp I reseated the card cleared or attempted to clear the Z600 cannot reset cmos after enabling compute. CMOS and the offending setting about a nbsp hundred times following the official procedure then Z600 cannot reset cmos after enabling compute. any other I could find to no avail nbsp I found a thread with the exact same issue which mentioned having to wait for the stored energy in the system to bleed off and pressing the power button several times before pressing the CMOS reset button nbsp It worked for others but not me nbsp I have tried everything moving the card changing the card to one that supports CUDA but I enabled both slots I have powered down the machine unplugged the power cord removed the power supply waited hours pressed the CMOS reset button for seconds three times and I still have the six beeps nbsp Unless my machine contains some secret alien technology I am lost nbsp How do you clear the CMOS nbsp I have tried every procedure theory guess chant and encantation I know nbsp I started building computers when Jimmy Carter was Preident and I have seen it all almost nbsp The only other option I can see is a PCI VGA card so I can get back into the BIOS nbsp Any ideas or advise would be appreciated nbsp nbsp It's a great machine and I want it back
I don't know the exact positon of the CMOS RESET switch, but you can remove the battery to set BIOS defaults.Don't forget to unplug the power cord, no need to remove the power supply or graphics card.Put back the battery after a few minutes and power on the machine.Video should be back now and all BIOS settings (including time and date) are lost.http://h30434.www3.hp.com/t5/Business-PCs-Workstations-and-Point-of-Sale-Systems/Z600-cannot-reset-cmos-after-enabling-compute/td-p/5065741
Thank you in advance for any and all help provided, My father gave me a "Z600 workstation" that he is not going to use anymore(retired). I noticed that this unit can have a dual CPU setup. My question is if I can use this unit for gaming. Can I set up the rig with 2 CPU for better gaming performance? I am aware of GPU and RAMM upgrades but not to sure if it's even possible to run the 2 CPU at the same time? Will having the 2 CPU increase the GHz speed from 2.13GHz - 4.26GHz? system : HP Z600 WorkstationIntel Xeon E5506 (1x)@2.13GHz3GB DDR3 RAMMWindows 8.1 ProBoot Block Date 01/30/09 B3-based systemhttp://h30434.www3.hp.com/t5/Desktop-Hardware-and-Upgrade-Questions/Will-adding-second-CPU-improve-speed-Z600-workstation/td-p/5672234
Hi everybody i need your help i have hp z600 workstation but when start doesnn't show anything i change procesor ram graphic card but same problem didnt show anything in scren can anybody know what is to happen with my pc ?
Do the system fans start to spin after you hit the power button ?Does the workstation not beep and blink red ?http://h30434.www3.hp.com/t5/Business-PCs-Workstations-and-Point-of-Sale-Systems/HP-Z600-Workstation-doesn-t-show-anythink/td-p/5571295
Hello,I recently acquired a z600 with a quad core Intel Xeon E550 and I would like to know if it is possible/desirable to put my old z400 two quad core Intel Xeon W3550.I checked and both use socket b type soo I'd assume I should have a problem but as hardware is outside of my knowledge base I wanted to ask =)Thank you in advance
Hi, The z600 series of workstations support Intel Xeon Processor X5570 QC 2.93 GHz, 95W, 8M cache, 6.40GT/s QPI, DDR3 1333 MHz, HT, TurboIntel Xeon Processor X5560 QC 2.80 GHz, 95W, 8M cache, 6.40GT/s QPI, DDR3 1333 MHz, HT, TurboIntel Xeon Processor X5550 QC 2.66 GHz, 95W, 8M cache, 6.40GT/s QPI, DDR3 1333 MHz, HT, TurboIntel Xeon Processor E5540 QC 2.53 GHz, 80W, 8M cache, 5.86GT/s QPI, DDR3 1066 MHz, HT, TurboIntel Xeon Processor E5530 QC 2.40 GHz, 80W, 8M cache, 5.86GT/s QPI, DDR3 1066 MHz, HT, TurboIntel Xeon Processor E5520 QC 2.26 GHz, 80W, 8M cache, 5.86GT/s QPI, DDR3 1066 MHz, HT, TurboIntel Xeon Processor E5506 QC 2.13 GHz, 80W, 4M cache, 4.80GT/s QPI, DDR3 800 MHzIntel Xeon Processor E5504 QC 2.00 GHz, 80W, 4M cache, 4.80GT/s QPI, DDR3 800 MHzLooks like they support CPU's with 80W to 95W. The Intel Xeon W3550 has TDP 130W . http://ark.intel.com/products/39720/Intel-Xeon-Processor-W3550-8M-Cache-3_06-GHz-4_80-GTs-Intel-QPI I don't think this is going to work. Regards.http://h30434.www3.hp.com/t5/Business-PCs-Workstations-and-Point-of-Sale-Systems/Changing-my-z600-processor-to-my-z400-processors-CPU-upgrade/td-p/5854559
I am running an HP Z workstation Bios version G V nbsp OS is duel boot Windows Professional -bit amp Ubuntu LTS nbsp Using F set-up I have Enabled Advanced- gt Bios Power On for all days of the week and have set a time for power on Under Advanced- gt Device Options I have enabled wake on lan Under Advanced- gt Power on- gt Options After Power Loss i have set the option to always on nbsp If push power on button on front of machine it auto boots to Linux If I then pull the plug the machine immediately goes off If I plug the machine back in NOTHING HAPPENS It doesn't power up I have to push the button If I unplug the machine and then plug it in and wait until the BIOS Pwoer On time then machine does NOT boot or power up at the selected workstation auto after won't Z600 power loss boot time Again I have to push the button to get it to power on nbsp What am I missing or doing wrong The machine is being used as a remote server It has to automatically reboot after power loss nbsp Any help would be greatly appreciated nbsp Solved View Solution
Changed nothing and the issue went away.Had a 4 hour power failure in the building.When power was restored machine automatically rebooted.So pulling plug on Z600, machine doesn't auto-boot.Power fail entire building: router, monitor, Z600 and machines boots.http://h30434.www3.hp.com/t5/Desktop-Boot-and-Lockup/Z600-workstation-won-t-auto-boot-after-power-loss/td-p/5464151
Greetings nbsp st time come date Qestion about block (urgent) Z600 boot here but i need a quick answer to a question related to CPU amp Memory supporting - nbsp I try to obtain a used Z workststion for editing projects originally Qestion about Z600 boot block date (urgent) nbsp fitted with DDR GB x nbsp E x Nvidia NVS x G HD x being offered by a seller nbsp Seller managed to sent me a photo capture part of the bios it writes boot block date c revision board nbsp My question is - nbsp is it possible to run dual X Westmere core CPus using stock heatsinks kit No WG AA nbsp is it possible to run max GB x GB DDR - ECC Registered Ram nbsp Note that both Cpus and Ram will most likely obtain from after-market sellers other than designated HP distributers nbsp See attached jpeg for snap shot of system bios boot block date nbsp nbsp Kindly i need a quick reply or the Z offer will slip away fast nbsp Regards nbsp PMhttp://h30434.www3.hp.com/t5/Business-PCs-Workstations-and-Point-of-Sale-Systems/Qestion-about-Z600-boot-block-date-urgent/td-p/5682114
I am in need of a new system board for a Z600 but want to know which version would work with the 56xx series of Xeon dual processors? There's 460840-001, 460840-002 and 460840-003. The one that came with the machine was 460840-003 / REV AE, but it died so I got a replacement 460840-001 / REV 0D, however, I can't get the computer to post. So I'm looking for which board and Revision I need to make it work? Thanks. Would this one work?http://bit.ly/1omeMkF
The Z600 460840-003 supports both the 55xx and 56xx Xeon processors. As you discovered, the 460840-001 only supports the 55xx Xeons. I am not sure about the 460840-002, but there are other threads in this forum where some have tried the varioius -00x Z600 versions.
I am an HP Employee.My opinions are my own, and do not express those of HP.
I have a Z600 that came with an REV #003 motherboard and two X5670 CPU's. The board went bad and I replaced it with a REV #001, not realizing that it won't run X56xx chips. So I then purchased two X5570 CPU's and put them in. When I boot, I get a series of 8 beeps, and an error message that the BIOS is corrupt. So I created a BIOS recovery disc and flashed the machine as per the instructions. I then unplug the power cord (as opposed to powering down first), wait 5 seconds and plug it back in a power up. I then get the 8 beeps and the error message just like nothing has been done to fix it. Is it possible that trying to run X56xx chips on that board fried something? Is there a way to reset it? What should I try next? Thanks.http://h30434.www3.hp.com/t5/Desktop-Boot-and-Lockup/Z600-Bios-Image-Corrupt-ROM-flash-doesn-t-work/td-p/5599283
HP Z600 & Z800 Workstations support Nvidia Quadro M4000 8GB Grpahic Card? Can the defual power supply hand the wattage from the new GPU's? Currently running Nvidia Quadro FX4800 graphic card.http://h30434.www3.hp.com/t5/Business-PCs-Workstations-and-Point-of-Sale-Systems/HP-Z600-amp-Z800-Workstations-support-Nvidia-Quadro-M4000/td-p/5614092
Hi.Our brand new HP Z600 workstation running win srv 2008 rebooted after only couple of weeks with the following output from bios level screen:System reset caused by CATERR.927 - Fatal error on dimm in slot CPU0 DIMM1ECC Error on read operation What does this mean and how can we prevent this from happening in the future ? ThanksSergey
Having the a similar caterr error message.Did you recieve any response? Thanks.http://h30434.www3.hp.com/t5/Desktop-Hardware-and-Upgrade-Questions/Z600-workstation-reboots-system-reset-caused-by-CATERR/td-p/157403
Edit - CPU model revised for a porper CPU X nbsp it's st time come here but i need a quick answer to a question related date block about CPU for Qestion Z600 model) (Revised boot to CPU amp Memory supporting - nbsp I try to obtain a used Z workststion for editing projects originally nbsp fitted with DDR GB x nbsp E x Nvidia NVS x G HD x being offered by a seller nbsp Seller managed to sent me a photo capture part of the bios it writes boot block date c revision board nbsp My question is - nbsp is it possible to run dual X Westmere core Qestion about Z600 boot block date (Revised for CPU model) CPus using stock heatsinks kit No WG AA nbsp is it possible to run max GB x GB DDR - ECC Registered Ram nbsp Note that both Cpus and Ram will most likely obtain from after-market sellers other than designated HP distributers nbsp See attached jpeg for snap shot of system bios boot block date nbsp nbsp Kindly i need a quick reply or the Z offer will slip away fast nbsp Regards nbsp PMhttp://h30434.www3.hp.com/t5/Business-PCs-Workstations-and-Point-of-Sale-Systems/Qestion-about-Z600-boot-block-date-Revised-for-CPU-model/td-p/5682114