Windows Support Forum

How do replace ssd boot drive in a HP ENVY Phoenix 860VX Des...

Q: How do replace ssd boot drive in a HP ENVY Phoenix 860VX Des...

I purchased a HP ENVY Phoenix 860VX Desktop with a 256 GB SSD drive as the boot drive with a 1TB storage drive. I have a Samsung Evo Pro 500GB SSD that I want to use as the boot drive. I cloned the original drive to the Samsung Evo without a problem. I opened the case of the PC to switch hard drives, and I can't find the SSD drive. I found the 1 TB storage drive easy enough but can't find the SSD drive. Can anybody help?










Solved!
View Solution.

Relevancy 100%
Preferred Solution: How do replace ssd boot drive in a HP ENVY Phoenix 860VX Des...

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: How do replace ssd boot drive in a HP ENVY Phoenix 860VX Des...

Greetings, You may have a 256 GB M.2 PCIe (Non-SED) Solid State Drive. This drive connects on the motherboard, It is about the size of a stick of gum. It could be mounted vertically or laying flat on the motherboard (MB). The M.2 drive is much faster than a SATA 3 SSD. You may not be happy with this change if you purchased a SATA 3 SSD. You might be better off going to a 512 GB M.2 if the MB supports it. I have noticed the M.2 drive performs closer to rated speed when you use an i7-5930k or an i7-5960x due to the 40 lane PCIe bus as opposed to 28 lanes on the i7 -5820k. It should be near the PCIe slots. Asrock, Asus, and Gigabyte locate the M.2 slots there as it connects to the PCIe x16 bus and uses the bandwidth of one of the x16 slots. If this is true, install the SATA SSD in available HHD bay using a 2.5 inch adapter. Then change default boot device in BIOS to the SATA SSD. You may have to experiment on what SATA port you use. EFI can be finicky. It is also possible that you may have to reinstall the factory image. I have an Asrock x99 board with M.2. The Asrock BIOS is much more forgiving and configurable. I am not familiar with your PC's MB or the boot configuration options available when going from an M.2 boot device to a SATA boot device. Making this hardware change could also mess up using the factory image to restore the PC. It depends on whether this hardware change is a configurable option at purchase. Cheers!

http://h30434.www3.hp.com/t5/Desktop-Operating-Systems-and-Recovery/How-do-replace-ssd-boot-drive-in-a-HP-ENVY-Phoenix-860VX/td-p/5586968
Relevancy 14.62%

I sometimes wonder about techs using tools such as Seatools, HDD regenerator etc to diagnose/repair hard drives. Do any of these tools beat Chkdsk in any way?
(besides data recovery tools, I guess those have no match in Windows).

Thank you
 

A:Do you need more than Windows default tools to check/repair a hard drive?

IMO, always use the tool provided by the vender. At the time you need this tool, you don't need a 3rd party screw-up to 'help you' really mess it up.
 

http://www.techspot.com/community/topics/do-you-need-more-than-windows-default-tools-to-check-repair-a-hard-drive.217548/
Relevancy 14.62%

I've said time and time again that solid state drives are the future but the truth of the matter is, traditional spinning disks still have a place inside a modern PC as a storage / backup drive. The question then becomes,...

Read more
 

A:Latest hard drive reliability data reveals it may be best to avoid 3TB drives

Well I'm glad I have never bought a Seagate HD. I usually buy Western Digital, except my SSD is Samsung.
 

http://www.techspot.com/community/topics/latest-hard-drive-reliability-data-reveals-it-may-be-best-to-avoid-3tb-drives.208285/
Relevancy 15.48%

Hello,
This is my first login and first topic , I see on this category thousands of topic at this time , my problem is error message "The disk is write protected" , I am wondering what is this mean and how to solve this error?
Sincerely Yours,
Have a wonderful day
 

http://www.techspot.com/community/topics/write-protected-drive.217334/
Relevancy 14.62%

SanDisk has come up with a clever take on a common PC accessory that kills two birds with one stone. Its new wireless mobile flash drive is designed to make it easier to transfer files between devices while simultaneously extending...

Read more
 

A:SanDisk's new wireless flash drive kills two birds with one stone

"...when you consider micro SD card slots on smartphones are on the way out."

Just because a prominent phone maker decides to experiment by not including the microSD slot, does not mean this tech is on the way out. There is REAL need for this, and if the big S doesn't want to include this in their phones, people will find other phones that do have this capability.
Lets not forget just how bad sales were/are for the S6.
 

http://www.techspot.com/community/topics/sandisks-new-wireless-flash-drive-kills-two-birds-with-one-stone.216608/
Relevancy 22.79%

Hello I have a Dell Inspiron laptop I have an image of the entire hard drive that I created when I first got the computer using Acronis TrueImage and I d like to restore that image returning the laptop back to that fresh clean original state I ve done this two or three times before and it worked great each time But now there s a problem Normally I would in boots as when drive external but laptop hard Primary recognized isn't drive used connect to the laptop a USB storage backup drive that has the disk image boot the laptop from a Rescue Media CD created by Acronis then restore that disk image from the back-up drive onto the laptop s HDD When I tried it this time round the laptop s HDD was not listed in TrueImage at all I created a new rescue media disk tried it again and got the same result I then took the HDD out of the laptop connected it to Primary hard drive boots in laptop but isn't recognized when used as external drive an adapter kit that let s you power up and plug in the drive via a USB port and external power supply and tried the same procedure using my desktop to run the operation Same result The drive was not detected by Acronis The drive does not seem to spin up at all Primary hard drive boots in laptop but isn't recognized when used as external drive when it is connected Keep in mind the drive still works when installed in the laptop -- it boots into Windows XP etc When I plug the drive into my desktop the drive does not show up in Disk Management Start Right-click My Computer Manage Disk Management It doesn t show up in either of the two right-side windows so there s no way I know of to format it or do any work on it in Windows When I go to Device Manager Disk Drives I see quot USB Device quot for that drive and under Properties it is listed as quot Disk Drives quot for quot Device Type quot and its status says it is working properly So what I don t get is it works fine when it is in the laptop boots into XP etc but when connected as an external drive or when the laptop is being run off of CD the drive can t be detected and not on just one computer but multiple Is it junk Any ideas nbsp

A:Primary hard drive boots in laptop but isn't recognized when used as external drive

It's a power issue. Had the same issue taking a 2.5" laptop hdd and attempting to hook up w/ a passive usb sata hdd cable. my recommendation is to use a powered usb sata cable. like this one: http://www.newegg.com/Product/Product.aspx?Item=N82E16812119475 having proper power will allow the USB bus to detect and power the hdd correctly. Hope this helps, take care!
 

http://www.techspot.com/community/topics/primary-hard-drive-boots-in-laptop-but-isnt-recognized-when-used-as-external-drive.174938/
Relevancy 15.05%

Hi every one
I need your help gays
I saved some files in my USB but when I explore my USB the files are not appear
it shows that usb is empty
I do not know what to do
thanks
 

A:USB drive doesn't show my files

Have you tried the same USB on a different pc? If not, do so.
 

http://www.techspot.com/community/topics/usb-drive-doesnt-show-my-files.187106/
Relevancy 15.91%

Hello I have a tower just recently bought all the parts from newegg and was building the tower for the last days I had everything put in as it should be and initially it stayed on but no image was portraying problems up boot Building computer on the monitor A friend explained I was using the wrong port to portray image as it should be through the video card I should be connecting it but after troubleshooting the problem Building computer boot up problems initially I removed RAM and put it back in but computer now turns on for a second then right off I hear and see the fans running the dvd drive spinning and the lights go on but then it shuts right off after another - seconds it turns on again and then after another second turns right back off in an endless cycle until I turn it off completely and unplug it Not sure what the next steps are or if I should return the moba for an exchange After reading a lot of forums I noticed that it could be the RAM was improperly placed so I tried many times to take it out and put it back in but same problem keeps occurring I hear no beeps and only hear a click from the power supply when it goes on I tried the psu tester on the power supply and it tells me it should be working fine Any one have any idea moba ASRock Z M Pro Micro ATX Intel Motherboard ram CORSAIR Vengeance GB x GB -Pin DDR SDRAM DDR PC Desktop Memory Model CMZ GX M A C B power EVGA -G - -XR W Power Supply case Thermaltake Level Series Level GT VN W N Black Computer Case processor Intel Core i - K GHz LGA BX I K Desktop Processor video card EVGA GeForce GTX Ti G-P - -KR FTW w ACX Cooling Video Card Please someone help and thanks to all nbsp

A:Building computer boot up problems

Okay, I've had the same issue with a new build: Put it all together, switch on the power and basically nothing. Do the following tried and true diagnostic steps that can be tedious but costs nothing to do and can often zero in on your issue:

1. Uninstall everything from your motherboard and disconnect all peripherals from your power supply except psu to motherboard, cpu, and one stick of RAM. Now turn it on. If it boots up and stays booted then shut it down and then...

2. Add your second stick of memory -- nothing else. Repeat by booting up and if it stays booted up then...

3. Start adding one piece of hardware at a time and repeat as directed.

What are your findings?
 

http://www.techspot.com/community/topics/building-computer-boot-up-problems.215853/
Relevancy 15.05%

Today, my external hard drive has not appeared on my PC. It did work before I went to sleep yet when I began my PC in the next morning, it didn't show. Can you please help me how to fix this?
 

A:External hard drive not showing up on my PC

Hello there,

There are a lot of different reasons for an HDD to stop showing. A few things you can try are:

Try using a different USB cable, make sure it is as short as the original one, or even shorter. This is important it terms of providing enough power for the drive to function properly.

Try connecting it to different USB ports.

Try connecting it to a different PC.

Sometimes the drive can misbehave due to insufficient power even if it appears to be spinning make sure you connect the HDD directly to the USB port and not through a USB hub.

Check if you can see the HDD in Windows Device Manager and in Disk Management. Good luck.
 

http://www.techspot.com/community/topics/external-hard-drive-not-showing-up-on-my-pc.209548/
Relevancy 16.34%

Hi all, my pc has been playing up for a while, it has gone through 3 CMOS batteries in the space of 5 months, but just now it has presented a new issue (could be related), with two sticks of RAM in, it posts and boots the os as normal... With 3 in, it will post and get through BIOS, but it starts loading OS and jumps back to BIOS again... Now with 4 sticks in, it wont even post... Are there any suggestions

My PC specs...
Penryn 1600SLI-110dB mobo
Intel quad core q6700
And (now only) 4gb ram
 

A:RAM preventing boot

Try one stick at a time
 

http://www.techspot.com/community/topics/ram-preventing-boot.214773/
Relevancy 15.05%

Hi

Thanks for any help in advance..

I own a WD MyBook 4TB hard drive, which I've used on Windows for the past 2 years. I got a macbook last week and hooked the drive into it, some error message came up so I figured it wouldn't work, however when I went to plug it back into my windows machine I got the "USB device not recognised" message, the laptop is windows 8. I then tried it on my fathers windows xp computer and it seemed to think it was a completely new hard drive..

I've done some googling on it but I just wanted to ask here incase I went formatting it by mistake or anything..any advice/help would be greatly appreciated.

Thanks
 

A:External USB hard drive not recognised on Windows after plugging it into a Mac

Sounds like you made some procedural error, allowing the Mac to alter the partition - - bad choice.

Using Windows tools, examine the partition on that drive - - should show up as
somelabel (dl): size HTFS
Healthy (other qualifiers)​
Try Control Panel ->Admin Tools->Computer Mgmt->Disk Mgmt
 

http://www.techspot.com/community/topics/external-usb-hard-drive-not-recognised-on-windows-after-plugging-it-into-a-mac.200827/
Relevancy 13.33%

Hey there all.

This problem just happened recently. Every time I put a blank CD in my CD drive, a message appears saying "E:\ is not accessible. Incorrect Function. I can watch DVDs but it won't recognize any blank CDs I put.

Any ideas?

Thanks in Advance.
 

A:Drive is not accessible - "incorrect function"

First try this from the Windows Explorer after you have inserted a disc.

Right-Click on E: drive

Select Properties from the pop up menu

Select the Recording Tab

then check the "Enable CD Recording On This Drive" box.
.
 

http://www.techspot.com/community/topics/drive-is-not-accessible-incorrect-function.166087/
Relevancy 15.48%

Hi I have a few questions about my external hard drive. I play games and I noticed that my internal hard drive was getting full so I bought a new external hard drive. I was wondering if I backed up my internal hard drive to my external one and then formatted my internal hard drive, would I have to re install everything or would I be able to access my games and such. Thanks for your time its much appreciated.
 

A:External Hard Drive

You would have to e-install all of your games, and applications, and windows updates
 

http://www.techspot.com/community/topics/external-hard-drive.213122/
Relevancy 28.81%

I'm replacing a motherboard for a HP laptop. I need to replace this backplate for the CPU heatsink to the new motherboard. I've tried to pull it out but it seems to be glued onto the motherboard.
If I manage to pull it out, should I replace the glue, double-sided tape or whatever is underneath?

HP G62-b80SS laptop.
Intel Core i3 CPU.
Thank you
 

A:How can I remove/replace this CPU heatsink backplate (where the CPU socket is screwed)?

It is probably double stick tape used to insure it stays in place. Replacing it is your call. As long as the heatsink is mounted correctly, it really doesn't matter if the backplate is loose or stuck in place. Sticking the backplate simply makes mounting the heatsink easier to manage.
 

http://www.techspot.com/community/topics/how-can-i-remove-replace-this-cpu-heatsink-backplate-where-the-cpu-socket-is-screwed.213375/
Relevancy 15.05%

Guys I need all the expert help I can get I ve got a Western Digital quot My Book quot i think it was called that that has had every picture that me and my girlfriend have ever corrupt drive hard photos All on newborn external taken including when we first met holidays pets and most importantly pictures of All newborn photos corrupt on external hard drive my girlfriends pregnancy and s of photo s of our month old son that have all gone missing and even some other photo s that still show the thumbnail image don t open because I get an error saying that photo s are corrupt or damaged my girlfriend is already going mad and I don t know what software to get them back At present i ve tried opening with different picture veiwers like photoshop no luck I ve tried EASEUS Photo recovery software but then cancelled because I read that Recova could do a better job turns out recova doesn t work on external drives NOW NOTHING WILL OPEN ON THE EXTERNAL HDD I need some expert advise on what program WORKS to try and recovery these files A S A P because otherwise we will be devistated I don t wanna buy loads diferent software only to find that i m doing more damage nbsp

A:All newborn photos corrupt on external hard drive

try pc inspector file recovery. http://www.snapfiles.com/get/smartrecovery.html

ALWAYS back up photos to more than one device.
 

http://www.techspot.com/community/topics/all-newborn-photos-corrupt-on-external-hard-drive.156964/
Relevancy 15.48%

Got a WD 500 Gb ext. drive. Won't turn on. pls, help
 

A:WD external drive

Is it a brand new hard drive? if yes, then you need to contact tech support of the drive and get help
 

http://www.techspot.com/community/topics/wd-external-drive.212453/
Relevancy 15.48%

How to repair a corrupt 64gig flash drive
 

A:Flash drive repair

Hi, This really depends on how it has 'gone wrong'.
If it's a hardware failure then nothing you can do will sort it out.
But if it's a software/format failure then;
Save everything you want off of it with a program such as 'Recuva'.
https://www.piriform.com/recuva/download
Then Format it again by;
Right-click on the Flash drive's icon in 'explorer' or 'Computer',
Choose 'Properties' from the list,
Choose 'Format'
Set the option of FAT 32,
Untick the 'Quick format' option, so that you are using the slower full format option.
Click OK.
Note that all the files that were on it will be gone, so be sure to save any valuable files first, if you can.
 

http://www.techspot.com/community/topics/flash-drive-repair.212321/
Relevancy 15.05%

Copying truscont protected usb flash drive
 

A:Copying truscont protected usb flash drive

You said the same thing in the title. You could be a little bit more descriptive. As it stands, I'm assuming you are wanting to copy someone Else's copyrighted media. In either case you couldn't prove the copyrighted media is yours therefor TechSpot cannot help you.
 

http://www.techspot.com/community/topics/copying-truscont-protected-usb-flash-drive.212030/
Relevancy 14.62%

Hello I need urgent help with resolving this as I am trying to get the harddrive showing up or at least recover files by Hard Portable Drive External Slim detected Seagate PC not I was using it at school first and my computer froze so I shut down the Seagate Portable External Hard Drive Slim not detected by PC computer and restarted without safely removing Seagate Portable External Hard Drive Slim not detected by PC the hard drive at first the PC wouldnt reboot because I had it still plugged in after unplugging it and the PC loaded up it did not recognize the hard drive anymore I have tried it on several PCs including the one at home all using Windows and none of them recognize it I tried all USB ports on my PC and none of them work the light on the hard drive is ON so I know there is no connectivity issue I tried several free trial softwares even the ones by Seagate and none of them recognized the drive so I cannot use their tools for recovering files or detecting the hard drive When I check the Disk Management it does not show there When I check the Device Manager it does not show under USB controllers but it DOES show under Disk Drives I also checked and the drive is up to date The Model is BUP Slim BK In my quick launch the drive is recognized there and gives me the option to Eject it but it doesn t actually Eject it when I click on it it either stop responding or does nothing unless I manually unplug it EDIT After a really long time the Eject message says the device is already in use which is probably why it doesnt Safely eject nbsp

A:Seagate Portable External Hard Drive Slim not detected by PC

I am also having the same problem, as I need to get some stuff off my hard drive but it does not show up on any of it, was just wondering if you had found a way to fix this yet?
Kind Regards
 

http://www.techspot.com/community/topics/seagate-portable-external-hard-drive-slim-not-detected-by-pc.207640/
Relevancy 22.36%

Ok im having this problem on 2 desktops. The drives are both DVD-RW drives. They show up properly in device manager and in my computer. That is, untill I stick a disc in it. Then it will spin and act like its about to read then it says its a CD drive with nothing inserted into it. If I explore the drive there is nothing in it. I went to device manager disabled and enabled it. also updated the driver and rolled back the driver they still do the same thing. Wondering if anyone has any ideas or solutions
 

A:DVD-RW drive reads as blank CD drive when disc is inserted

What sort of CD are you using? it could just be that your drive can't read the specific type of disk.
 

http://www.techspot.com/community/topics/dvd-rw-drive-reads-as-blank-cd-drive-when-disc-is-inserted.185776/
Relevancy 15.48%

I have just added a new SSD drive does recognize 1720 Inspiron in modular boot bay not BIOS sequence HDD in the modular bay of my Inspiron The SSD drive in modular bay is accessible if I boot using my normal harddrive or USB DVD-ROM drive for OS installation which I managed to install on the SSD drive Once boot using my regular HDD I can see the drive is set to Disk in Windows Disk Management And my other HDDs Inspiron 1720 BIOS does not recognize modular bay HDD in boot sequence as Disk and Disk I can boot thru HDD or HDD by selecting them in boot sequence However the SSD drive is not available as part of the boot sequence in the BIOS setup or F boot sequence The BIOS though recognize that there is an SSD drive attached Inspiron 1720 BIOS does not recognize modular bay HDD in boot sequence in modular drive bay My Inspiron is using the latest A BIOS and I could not find a way to include the SSD as part of the boot sequence The boot sequence works when I put back the DVD-ROM drive which boots without any problem with any bootable CD DVD Is there any way I can make the modular bay SSD bootable other than of course putting the SSD in the HDD or HDD caddy which some thing I do not wish to do Please help nbsp

http://www.techspot.com/community/topics/inspiron-1720-bios-does-not-recognize-modular-bay-hdd-in-boot-sequence.210955/
Relevancy 15.05%

I am looking for a new USB flash drive with all of the following features:

Metal case or very hard plastic. Not rubberized.
USB 3.0 with R/W speeds of at least 50MB/s
No cap, swivel cap or removable protective casing.
At least 16GB or more.

I still have SanDisk Cruzer Micro Titanium. I am looking for something similar in size and features, but faster with bigger capacity.

Any ideas? Thanks
 

A:Recommend a good USB 3.0 Flash Drive

I bought the Mushkin Enhanced Atom 64GB USB Flash Drive. The write speeds are a bit slower than I wanted at 20MB, but read speeds are above 100MB. I can't complain though as the drive performs as advertised. And for what I want it works perfectly. The casing is hard plastic not rubberized. I know you said no cap, I had that rule as well but grew tired of trying to sort through the available options. Anyway I wanted to pass the word on the recorded speed for my purchase. My last purchase was years ago for a 16GB Cruzer Micro like the one you have.

Here are the benchmarks for my flash drive.




Code:
Starting benchmark.
Bechmarking H:(070B51D3EFFD0114)
Started at 3/27/2015 7:46:25 PM
Filename: H:\test.tmp
Starting large file benchmark. With 100MB file.
16384k:6 Write Speed:30.01MB/s
16384k:6 Write Speed:12.35MB/s
16384k:6 Write Speed:12.21MB/s
16384k:6 Average Write Speed:15.29MB/s
16384k:6 Read Speed:120.24MB/s
16384k:6 Read Speed:119.94MB/s
16384k:6 Read Speed:120.17MB/s
16384k:6 Average Read Speed:120.11MB/s
8192k:12 Write Speed:15.81MB/s
8192k:12 Write Speed:11.34MB/s
8192k:12 Write Speed:11.79MB/s
8192k:12 Average Write Speed:12.70MB/s
8192k:12 Read Speed:120.74MB/s
8192k:12 Read Speed:121.35MB/s
8192k:12 Read Speed:121.55MB/s
8192k:12 Average Read Speed:121.21MB/s
4096k:25 Write Speed:12.96MB/s
4096k:25 Write Speed:15.06MB/s
4096k:25 Write Speed:12.31MB/s
4096k:25 Average Write Speed:13.34MB/s
4096k:25 Read Speed:119.21MB/s
4096k:25 Read Speed:118.23MB/s
4096k:25 Read Speed:119.46MB/s
4096k:25 Average Read Speed:118.97MB/s
2048k:50 Write Speed:13.38MB/s
2048k:50 Write Speed:8.91MB/s
2048k:50 Write Speed:8.88MB/s
2048k:50 Average Write Speed:10.01MB/s
2048k:50 Read Speed:111.43MB/s
2048k:50 Read Speed:110.82MB/s
2048k:50 Read Speed:111.68MB/s
2048k:50 Average Read Speed:111.31MB/s
1024k:100 Write Speed:10.32MB/s
1024k:100 Write Speed:12.79MB/s
1024k:100 Write Speed:15.42MB/s
1024k:100 Average Write Speed:12.50MB/s
1024k:100 Read Speed:116.58MB/s
1024k:100 Read Speed:113.60MB/s
1024k:100 Read Speed:116.50MB/s
1024k:100 Average Read Speed:115.54MB/s
512k:200 Write Speed:11.92MB/s
512k:200 Write Speed:14.19MB/s
512k:200 Write Speed:14.09MB/s
512k:200 Average Write Speed:13.31MB/s
512k:200 Read Speed:120.32MB/s
512k:200 Read Speed:119.08MB/s
512k:200 Read Speed:120.05MB/s
512k:200 Average Read Speed:119.82MB/s
Deleting file.
Starting small file benchmark. With 10MB file.
256k:40 Write Speed:8.28MB/s
256k:40 Write Speed:11.13MB/s
256k:40 Write Speed:7.81MB/s
256k:40 Average Write Speed:8.86MB/s
256k:40 Read Speed:94.47MB/s
256k:40 Read Speed:95.36MB/s
256k:40 Read Speed:94.49MB/s
256k:40 Average Read Speed:94.77MB/s
128k:80 Write Speed:6.15MB/s
128k:80 Write Speed:13.09MB/s
128k:80 Write Speed:4.10MB/s
128k:80 Average Write Speed:6.21MB/s
128k:80 Read Speed:91.57MB/s
128k:80 Read Speed:92.04MB/s
128k:80 Read Speed:93.11MB/s
128k:80 Average Read Speed:92.23MB/s
64k:160 Write Speed:8.12MB/s
64k:160 Write Speed:11.53MB/s
64k:160 Write Speed:11.81MB/s
64k:160 Average Write Speed:10.19MB/s
64k:160 Read Speed:87.04MB/s
64k:160 Read Speed:89.33MB/s
64k:160 Read Speed:86.33MB/s
64k:160 Average Read Speed:87.55MB/s
32k:320 Write Speed:1.87MB/s
32k:320 Write Speed:11.50MB/s
32k:320 Write Speed:9.33MB/s
32k:320 Average Write Speed:4.11MB/s
32k:320 Read Speed:31.22MB/s
32k:320 Read Speed:30.31MB/s
32k:320 Read Speed:31.01MB/s
32k:320 Average Read Speed:30.84MB/s
Deleting file.
Starting tiny file benchmark. With 1MB file.
16k:320 Write Speed:1.69MB/s
16k:320 Write Speed:8.21MB/s
16k:320 Write Speed:7.90MB/s
16k:320 Average Write Speed:3.57MB/s
16k:320 Read Speed:28.70MB/s
16k:320 Read Speed:29.28MB/s
16k:320 Read Speed:28.30MB/s
16k:320 Average Read Speed:28.76MB/s
8k:640 Write Speed:4.43MB/s
8k:640 Write Speed:5.20MB/s
8k:640 Write Speed:5.06MB/s
8k:640 Average Write Speed:4.87MB/s
8k:640 Read Speed:24.73MB/s
8k:640 Read Speed:25.06MB/s
8k:640 Read Speed:24.82MB/s
8k:640 Average Read Speed:24.87MB/s
4k:1280 Write Speed:2.83M... Read more

http://www.techspot.com/community/topics/recommend-a-good-usb-3-0-flash-drive.210791/
Relevancy 15.48%

My external drive cannot be detected by any computer. I also used diskmgmt and devmgmt. I plugged it to different usb ports as well but to no avail. I have important files here and I really need your help. thanks
 

A:Undetected external drive

What OS and how do u connect to this drive? Also have u tried the drive on another computer?
 

http://www.techspot.com/community/topics/undetected-external-drive.207982/
Relevancy 15.05%

I'm in deep doggy-doo.

When my 2TB Sata-III drive wasn't being recognized (ported to a new build), I pulled the data cable off to check the connection and off came the little plastic tab that guides the plug onto the pins!

Without it, there is nothing to press contact between the cable & pins, let alone hold the cable firmly in place.

Worse, I can't even plug it in to rescue the data off it! I suspect I must have damaged the connection somehow when I plugged it in. The pins appear fine (within reason considering what happened.)

Gluing the tab back in place is no help if the connection still doesn't work and I need to unplug it again.

Am I screwed or is there a way around this mess (short of paying hundreds to some recovery service)?
 

A:Plastic tab on SATA drive port broke off

Oh boy do I know the feeling, I once pulled off the same thing from a month old mobo, but I was able to find a replacement in a shop and soldered it back, maybe you can do the same ? Try finding a female SATA and soldering the other end of it to the HDD ?
 

http://www.techspot.com/community/topics/plastic-tab-on-sata-drive-port-broke-off.209316/
Relevancy 30.1%

I currently have 2 x 4GB sticks to equal 8GB but I want to upgrade to 16GB total. Initially I was going to buy the same 2 x 4GB sticks again since I have 2 RAM slots spare, but then I read about dual channel/quad channel etc and basically want to know if it would be better to add 2 more 4 GB sticks, or buy 2 x new 8GB sticks. Thinking performance wise, the price isn't too different.
I have MSI Z77A-GD55 mobo, and my RAM is Kingston 8GB 1600MHz DDR3

Thanks in advance for advice
 

A:Upgrading my RAM, better to add, or replace?

For DDR3 there is no quad channel, either way would work fine, go for the cheaper.
 

http://www.techspot.com/community/topics/upgrading-my-ram-better-to-add-or-replace.208842/
Relevancy 15.48%

So my DVD drive has died on my and I hear if u get a new one off Ebay u have to get the key from the old one DVD a drive 360 dead Replacing and stick it on the new so your Xbox will read it thats all well and good if your drive would work be picked up by PC The drive is dead and there is no way of getting the key Now if my logic is right the key is stored on one of the Microchips in the board so If I can get the chip off the board by heating it up what piece of Hardware would I need to read it and software to get the Needed information off in order to flash it onto the new XBox drive I plan to order I don t want to shell out on a new console as its in full working order despite DVD drive and doing it said way would be cheaper Yes Also if anyoen knows which chip it is on the Xbox Ben Q VAD Drive I be very happy I Plan on replacing it with another benQ drive I point out I do not intend to play pirated games I just want to be able to replace my DVD drive which may be against MS EuLA but I don t care as its not breaking UK law I will use it to back my games up again fully within UK law Thanks in advanced for replys nbsp

A:Replacing a dead 360 DVD drive

If you're positive that the old drive is dead (i.e. no power to the drive) then getting the key is impossible. if the drive has already been flashed then the key should have been saved. i'm quite positive there is no way to retrieve the key from the motherboard itself, without the use of specialized equipment, that you don't have access to anyways.

buy a new console and keep the old one for parts or sell it as is
 

http://www.techspot.com/community/topics/replacing-a-dead-360-dvd-drive.152537/
Relevancy 15.05%

USB flash drive - unreadable, can't format, cannot access

Symptoms in Windows 7/8

1) I Can see drive in "My Computer"
2) Double click on drive in my computer and it says : "Please insert disc into drive H:"
3) Right click and select format and it says: "There is no disc in drive H. Insert a disc, and then try again"

plz provide any solution
 

A:Usb flash drive hp 16gb v215b

Try removing or reformatting the partition from Disk Management. If you can't, see if you can delete the partition and create a new one.
 

http://www.techspot.com/community/topics/usb-flash-drive-hp-16gb-v215b.208440/
Relevancy 15.91%

Hi there I ve recently bought a second hand laptop because it was cheap and seemed to only have a minor problem which I hope to be able to fix So far problem TK Easynote boot Bell Packard I ve not been able to so I thought I d ask here for Packard Bell Easynote TK boot problem some help Specs Packard Bell Easynote TK CPU AMD Phenom II X N GHz Videochip AMD Radeon HD M GB VRAM RAM GB DDR orginal OS Windows Home Premium So the problem is that if I try to boot it Packard Bell Easynote TK boot problem about times it starts up I can hear the fan and HDD starting and see the lights turn on Then after a couple of seconds before seeing anything on screen I hear the fan stopping while the lights remain on The times it boots up properly and everything works What I ve Packard Bell Easynote TK boot problem done so far remove battery and power adapter reinstall RAM both at once and one by one hold down power button for a minute and try again with the power adapter connected This doesn t appear to do anything much I haven t removed the CMOS battery yet because it s embedded in a peculiar way and I m not familiar with how to remove it yet Then during one of the few sessions where I was able to boot successfully I installed the newest BIOS-version from the Packard Bell site This also didn t do anything Then since I wanted to do it anyway I started with the installation of Arch Linux where so far I ve only wiped the entire HDD and repartitioned it then I was too busy and couldn t complete it This doesn t matter much as long as I can get into the BIOS properly I ll be fine I m a Linux newbie but have successfully installed Arch Linux on a very old laptop So what I wanted to ask do you know any way to make the startup work everytime Do you have any ideas what it might be My theories so far - It s probably a hardware related problem since it still occurred after BIOS-update and full HDD-wipe without OS - broken powerbutton connection somehow -- gt replace powerbutton - broken fan overheating -- gt shutdown - broken fan cable sometimes does connect correctly I m curious if you have any theories on how to save the laptop Kind regards Ilja nbsp

A:Packard Bell Easynote TK boot problem

The laptop may need its thermal pads or paste replaced. The motherboard may be detecting a false over-heating signal...
 

http://www.techspot.com/community/topics/packard-bell-easynote-tk-boot-problem.207489/
Relevancy 30.1%

I have an old router. It's a D-link DIR-625. Lately it seems like browsing on my laptop and tablet have been sluggish. Could it be wearing out or has technology passed it by? I'm wondering if I should replace it.
 

A:When to replace a router

There are numerous other things that could effect Internet traffic. Of the most common in my area is bad service from ISP (bad lines or equipment).

Resetting your router could help if it is the router causing the issue. Simply unplugging it is not enough to do a full reset of all settings.

What does running http://www.speedtest.net/ state your connection rate is and does it match what you are paying for?
 

http://www.techspot.com/community/topics/when-to-replace-a-router.208133/
Relevancy 15.91%

Hi all. I've got this issue with my graphic card (fresh and crispy by the way - 1 month old). Few days ago I was just browsing web when suddenly blue screen came out of nowhere on my Windows 8.1 desktop PC. Ever since then when computer boots screen is filled mozaic-like with green squares, after few seconds it's changing to vertical lines. Obviously Windows window manager won't open at all, and it greets me with black screen. After I deactivated graphic card, and switched cable to main boards VGA port computer runs ok.

I've seen some similar threads on techspot suggesting that due to escessive dust 'consuption' GPU can overheat and irreverisbly burn therefore. Is it possible that the same thing occured here?




 

A:Green squares on computer boot, Nvidia GTS 250

It's what I've seen on the screen when one of my graphics cards has died. As it's almost new changing it shouldn't be a problem. It's more likely to be a faulty graphics card than dust. Double check that it's seating properly in its port and that the video cable is OK.
 

http://www.techspot.com/community/topics/green-squares-on-computer-boot-nvidia-gts-250.208163/
Relevancy 16.34%

Hi there! I was wondering if any of you tech heads can help? Been given my nephews laptop which had the vague description of it hasn't turned on in a couple months.

It's a zoostorm loaded with windows 7. I can get into the bios but after that it just sits with a black screen. Any help would be appreciated.

Steve
 

http://www.techspot.com/community/topics/laptop-failing-to-boot.208148/
Relevancy 15.48%

I am building a new system, only part used is the power supply. My motherboard can't detect my hard drive. I tried switching cables but it only detects my dvd drive. Any assistance will be greatly appreciated.
 

A:Can't detect hard drive

First make shure the data & power cables are plugged in securely, on both the MB and hard drive. and no there is not a power cable for the hard drive on the MB.
 

http://www.techspot.com/community/topics/cant-detect-hard-drive.207744/
Relevancy 16.34%

So I ve owned my P HM gaming laptop for around years now and for the most part I haven t had any issues However when I start my laptop it always defaults to booting off of the ethernet card even after switching my SSD to the position in the bios menu Normally this isn t that much of an issue as I can just cycle through the bios boot options using CTRL Laptop Boot issue ALT DEL The main issue that I am having now is that the last time I was using my laptop I used hibernate instead of the normal quot sleep quot or quot standby quot Now whenever I attempt to start my laptop up the message quot Resume from hibernate quot is on my screen which is normal except it tries to resume using the ethernet card If the laptop is in hibernate evidently I am not able to access the BIOS menu or cycle through my boot drives I have read that a way to fix this Laptop Boot issue might just be taking the battery out and letting any residual power that the motherboard might be running off of fade away over time I read that this normally only takes minutes or so I tried waiting minutes and it Laptop Boot issue didn t work so I just tried again but waited a few hours this time before putting the battery back in and attempting to start my laptop up The laptop is still attempting to boot from hibernate Does anyone know of any way to get to the BIOS menu from the hibernate screen Or does anyone know of anyway to fully shut off my laptop Laptop Boot issue to get rid of hibernate and just start up normally Any assistance would be greatly appreciated nbsp

A:Laptop Boot issue

it always defaults to booting off of the ethernet cardClick to expand...

This means that BIOS is not seeing any HD, marked Active and contains a bootable partition
 

http://www.techspot.com/community/topics/laptop-boot-issue.207645/
Relevancy 15.48%

Not sure where to post this so I can move it if necessary.

Started up my laptop today and I tried to open the cd rom/dvd bay and nothing happened. It will open with a pin pressed into the release hole, but not with the button. (Asus u50f)

When I looked in the device manager there was no drive listed. in computer management/storage/disk management there is no drive showing.

I took out the drive it looks ok. Is there anyway to test it or do I need to buy one and try it?

Thanks,

Warren
 

A:Optical drive is gone

Sounds like u need to replace u'r drive. I am not expert but cd rom and dvd rom do wear out.
 

http://www.techspot.com/community/topics/optical-drive-is-gone.207561/
Relevancy 15.05%

Is there any way of sharing hard drives/folder over the internet with the client side need to install anything.
I.e use add network location option in my computer
Or a client programme that is user friendly

The server side will need to run on my computer,
looked at FreeNas thats not an option,
Filezilla looks like it the best option server side of things but uses a client programe.

Im happy to run any programmes/OS's in a VM if that were needed.

Thanks in Advance
 

http://www.techspot.com/community/topics/sharing-hard-drive-over-internet-without-client-programes.207578/
Relevancy 14.19%

I had a new PC so I thought I would do a recovery disk on a separate partition of my parent's disk. Turns out windows wipes out everything regardless of partition when it does that. So now lifelong memories are gone and I'm freaking out! I used EaseUS to make different partitions which were deleted. After I found that the partition I chose stayed the same size but was renamed RECOVERY and it had the recovery data in it. However the rest was "unused" and so I dragged the RECOVERY to make full use of the disk and then I started scanning it deeply with hard drive recovery software. I am now through scanning with my 2nd program now (1st one didn't give me the files I needed) and I'm using RecoverMyFiles. The problem is I'm not really getting back any of the files I had deleted by windows, but I get some stupid windows files which were probably deleted in the recovery process!! PLEASE help me!!! I am desperate. Future hanging in balance thank you.
 

A:Recovering Lifelong Memories from Windows Recovery-Wiped External Hard Drive

There are quite a few programs you could try, I have had most success with Recuva by Piriform, but recently this program was said to be excellent by a user,
http://www.ylcomputing.com/content/view/350/153/
Obviously it's worthwhile trying both of them.
 

http://www.techspot.com/community/topics/recovering-lifelong-memories-from-windows-recovery-wiped-external-hard-drive.207350/
Relevancy 15.48%

I burn a fair amount of DVR disks with games, movies, and personal files. The drive works just fine. I can play DVDs and it reads other disk. However, I have one disk that just isn't reading at all. I ran the Windows Fix it says the media is not readable. When I insert the disk it is loading in the My Computer screen, and then makes a load funny sound and just doesn't read the disk. When it finishes, the drive ejects when you click on it and says to insert a disk. I looked at ISObuster and it also picks up nothing. I'm not 100% certain, but I'm pretty sure the disk was readable at one time. The disk doesn't appear to have any scratches, cracks, etc. Is there anything I can do to get the disk to be readable and work again? It has unreplaceable personal items. Any help would be greatly appreciated.

Thanks!
 

A:Media in DVD Drive is not readable

Have you tried using the disk in another machine, preferably a machine that has a newer drive? Is the disc a name brand disk that you know was bought from a reputable store?
 

http://www.techspot.com/community/topics/media-in-dvd-drive-is-not-readable.207225/
Relevancy 15.05%

Hi,
My USB drive is enabled. The USB flash drive or any other storage device is recognized when connected to my laptop. But when I click on the drive in windows explorer, it says access denied. The same works fine in other laptops. I have admistror previlages. There is no local group policy set up on Removable storage access. I have searched multiple forums and tried out various options, but still cant connect to my USB drive. The drivers are successfully installed and are the latest. This happens even when I connect my camera or mobile phone. It shows up as 'Removable Disk' in windows explorer, but cant access it. I have given authorization to the drive as well. Please help.
Dnana
 

http://www.techspot.com/community/topics/usb-flash-drive-is-recognized-but-still-cant-acess-windows-7.207068/
Relevancy 15.05%

I cloned my failing hard drive (a 160gb) to a new one (500gb). The installation seemed to go smoothly enough (it was my first time though) as it just required me to stay grounded and remove about 4-5 screws. When I loaded the PC up it wouldnt start the first time so I had to a Windows repair, which didn't seem to do anything except now it worked (it said it failed or something). I then had an issue with Windows 7 claiming to not be genuine although for one reason or another that stopped. Now my issue is that I am unable to access the additional memory of my new hard drive, I am able to access the cloned portion but not the rest (about 316gb). Any help would be appreciated, my PC is a Dell Latitude E6400 if that helps.
 

A:Inaccessible Memory on Cloned Hard Drive

Hello there,

It is absolutely normal not to see the rest of the free space in the moment. When you clone a drive you create the exact same image of old drive on the new one. This includes the size of the original HDD. However if you go to Disk Management ( type diskmgmt.msc in the search in the start menu and hit enter) you will see that you have one partition of 160GB and the rest of the space will be listed as unallocated. To use it you have two options ? you can create a second partition or you can extend the original one to take all the available space.

To create a new second partition just right-click on the unallocated space and select ?New Simple Volume?. This will starts a wizard to guide you through the rest of the process. First it will ask about the size of the partition. To use all the remaining space just type in the same value you have for Maximum disk space. Click Next.

Then you will get to choose and available drive letter to assign to this partition. Choose one and click Next.

Then you get to the Format partition window. You should choose ?Format volume with the following settings: ?. For the file system is best to leave NTFS. Allocation unit size as default. You can also put a label for the volume here. Then tick the box for ?Perform a Quick Format. ? Click Next. Then Click Finish. And you're done.

If at any point Windows pops up with the following message ?The operation selected will convert the disk to dynamic... are you sure you want to continue? ? click NO as this will most probably make your Windows unbootable and you will have to reinstall it.

If you want to extend the existing partition right-click on 160GB partition and select ?Extend Volume?. It will start the wizard and will only ask about how much space to add. Just select the maximum available space here and click Next, then click Finish. Once done your existing partition will be bigger and you'll be able to use all the space on your new HDD.

Hope that helps.
 

http://www.techspot.com/community/topics/inaccessible-memory-on-cloned-hard-drive.206835/
Relevancy 15.48%

Hi..

I have a problem with opening files from my pen drive. Actually I have deleted all my files from pen drive manually and after when I tried to open the pen drive contents its showing an error

"Please insert a disk into drive G:"

Please help me in resolving this problem.

I tried to rename the drive letter going to disk management but still its not working.

Is there any other method where I can repair or correct my pen drive to work.
 

A:Kingston 32GB Pen Drive

Try using diskpart to format your flash drive.
Open a command prompt (run as administrator).
Type in diskpart and press enter
Type in list disk and press enter
Type in select disk x (substitute x with the corresponding disk number of your flash drive in the list) and press enter
Type in clean and press enter
Type in create partition primary and press enter
Type in active and press enter
Type in format fs=ntfs label=Kingston_32GB quick and press enter
Type in assign and press enter
Type in exit and press enter

I hope that will fix your problem.
 

http://www.techspot.com/community/topics/kingston-32gb-pen-drive.202782/
Relevancy 14.62%

My 320 GB Seagate external hard drive is detected but not showing up in my computer. What should I do?

In cmd> diskpart> list volume it does not show up. (screenshot attached)

In Device Manager it gets detected. (screenshot attached)

In disk management it shows up as 'unallocated'. If I initialize it, will I lose all data on the drive? It had 4 partitions. (screenshot attached)

In My Computer also it does not show up. (screenshot attached)
Even BIOS recognizes it.

What to do? I don't want to lose any data on the drive. If I initialize it in device manager will I lose data?

I was installing window XP on my computer, usually I remove the external drive but this time I did not. The external drive was shown as 4 drives in partition manager during installation. But the installation failed. The next time I was installing windows again, the external drive was shown as 1 single unknown or unrecognized drive. I'm not sure if it was unknown or unrecognized. I'm sure I didn't format it. So what I need to do now? I don't want to lose any data.
 

A:Seagate external hard drive not showing up in my computer. It is detected.

Yes, if you initialize it you will 'lose' everything. You will want to try something like [email protected] Recovery or maybe Easeus Partition Recovery.
 

http://www.techspot.com/community/topics/seagate-external-hard-drive-not-showing-up-in-my-computer-it-is-detected.205926/
Relevancy 15.48%

Hello all,

My machine is running XP professional. My problem is about the CD/DVD drive. In normal state, when it's empty, it can be opened and closed just as normal. But for most of the CDes or DVDes, one problem will occur.
The problem is, first that CD or DVD will not be read/recognized. Then the CD/DVD drive is no longer available in my computer window like that is not recognized as well. And also in deice manage's list, there isn't any CD/DVD drive item!
In those situations, every time I need to restart the PC one or several times and try to eject the cd drive and put out that CD/DVD and start the machine again. Then the CD drive will return again!

How to fix that problem please?
 

A:My problem with my cd/dvd drive

Hi, It could be the DVD's firmware is out of date or corrupted in some way (unlikely though.)
If the DVD drive shows in 'Device manager' at first boot, with no disc in, try uninstalling it (right click on the drive) then reboot the pc, it should re-discover it.
Also remove both the power plug and the data plug from the back of the DVD drive and plug them back in again just to remake the connections.
Might be worth checking the connections from the ribbons to the motherboard as well.
 

http://www.techspot.com/community/topics/my-problem-with-my-cd-dvd-drive.206353/
Relevancy 15.48%

My Buffalo HD which is actually a WD 500GB Hard drive. I opend it up and connected via SATA adapter but still the problem persists. I checked the drivers. Looked for clicking noise as in dead hard drive but none of those problems seems to be there. Also I tried formatting it but was unable to do so. Can anyone tell me whats the cause? It still may be the head problem but its not clicking as a dead hard drive does. It also seems to be spinning just fine but can't get to the root of the problem. Does anyone knows whats the problem?
 

A:Hard Drive Not Responding

Could be some issue on the PCB. Suppose if you were really dedicated to getting your data back you could buy the same drive off eBay or wherever and swap the boards. That may be more difficult to do since Buffalo may not have stuck to WD the whole time OR WD supplied a special series of drives to Buffalo. Check the model numbers to be sure before going that route.
 

http://www.techspot.com/community/topics/hard-drive-not-responding.206015/
Relevancy 15.05%

My old hard drive was a sata drive but it failed so I had an old ide 80gb barracuda 7200rpm drive that I wanted to install windows on but when I load the windows installation and goto custom it wont show my drive. My bios detects it its just windows . I tried using diskpart and even formating the drive to ntfs witha complete whip but still no luck .
 

A:Windows installation can't detect my ide hard drive?

Perhaps the hard drive's jumper setting is incorrect. Are there any other IDE devices connected on the same cable as the HDD?
 

http://www.techspot.com/community/topics/windows-installation-cant-detect-my-ide-hard-drive.192208/
Relevancy 15.05%

Hi,

Quick question and I believe the answer is NO. If you have a PC with one drive where OS is already running and configured, can you add another identical drive and configure RAID 1 without having to reinstall or reformat anything?

Thanks
 

A:Setting up RAID 1 on already running OS drive

Hey there, pioneerx01!

Unfortunately, you can't convert a single drive into a RAID array without data loss. At least one sector will be overwritten, which will cause problems because the file system and partition information will not be correct anymore. This will lead to a lot of annoying notifications and very unpleasant problems.
However, I believe there's a chance to create RAID arrays while keeping the data but I'd strongly advise against it.
The best way to deal with this is the safe way - back up your data and properly create the RAID 1 array.

Hope this helps.
SuperSoph_WD
 

http://www.techspot.com/community/topics/setting-up-raid-1-on-already-running-os-drive.205730/
Relevancy 29.67%

I dont think im getitng a CPU upgrade in awhile so i need to know how often should i replace my CPU thermal paste. I dont think i replaced the paste in like 6 years (Day my dad bought)
Any suggestions and will it improve my performance
 

A:How often should I replace my thermal paste?

As long as the temps are not too high there will not be any performance loss. I wouldn't worry about replacing thermal compound, unless you are experiencing temperature issues.

If you are wondering what your temps are. Download Core Temp and watch your CPU temps.
 

http://www.techspot.com/community/topics/how-often-should-i-replace-my-thermal-paste.178411/
Relevancy 15.05%

This issue started when I was connected to it and while accessing it recognized Google at day my despite External drive fu not attempt long I touched the cable and it disconnected Since that External drive not recognized despite my day long attempt at Google fu no luck in finding the external drive to External drive not recognized despite my day long attempt at Google fu access it I ve been using it for a a year and although a touch of the cable caused a disconnect it still worked well The device shows up nowhere on my laptop which I use to edit my photographs Here s a screenshot showing device manager disk management etc http I imgur com u ezzj png The hard drive is a WD MyBook Essential TB that is named quot Local Disk E quot on my laptop I should mention the hard drive s light is on when I plug it to the computer and will idly blink The light is off if not connected to a computer even if it is plugged in to a power source My troubleshooting steps Use different cables-- did not work Connect it to other USB ports-- did not work Connect other devices iPhone and a different WD hard drive -- all devices work on all ports Check for presence in disk management and device manager-- nothing there so I can t change the drive letter Remove all USB drivers and reinstall using Intel USB driver set obtained from Asus website using my computer model Asus G VW http www service asus com downloads c wax -- did not work Install drivers obtained from WD support website link to model http support wdc com product download asp groupid amp lang en -- did not work Shut down disconnect then start up and connect hard drive-- did not work Change cables and test-- nothing wrong with cables The biggest f you of them all connect the same hard drive to another laptop-- works flawlessly I am at a complete loss on what to do nbsp

A:External drive not recognized despite my day long attempt at Google fu

What do you mean by the point #9. Did it really worked well on different computers? Have you replaced cable or anything before connecting it to different computer?

The reason I'm asking it because you've already tried everything we could suspect off for the external hard drive to not work properly.

Instead of connecting it externally, try connecting it directly to the motherboard using SATA/IDE cable and see if it may start properly and allows you to see your data properly.

In worst case, you can take help from the WD support professional or alternatively, can ask for returns if the hard drive is in warranty.

Good luck though!!
 

http://www.techspot.com/community/topics/external-drive-not-recognized-despite-my-day-long-attempt-at-google-fu.205135/
Relevancy 16.34%

Hello everyone Been having some crazy stuff going on with this new PC that I just built I cannot get it to startup at first try I just get a black screen and the BIOS welcome try always doesn't first second/third at (but does try) up PC boot at doesn t show up and neither does the windows startup loading of course When I manually restart it Power Button long press it runs just fine I have read that thousands of things could be potentially causing this from Hard Drive to Power Supply to graphics card but my actual bet is on RAM voltages overclock causing it since I recently overclocked it via BIOS setting the default frequency at mhz which is what my RAM offers at maximum and the max that my Motherboard can read The actual voltage is set to auto via BIOS which stays at V so I m not sure if lowering or raising it will solve the problem XMP is disabled not sure if that s relevant My BIOS is up to date My graphics card is old I m planning to change it soon but I didn t have any problem in the past with it Hard drive is also old but runs just fine I m open for any suggestions Specs - Tacens Mars Gaming W power supply - AMD FX- Eight-Core - PC doesn't boot up at first try (but always does at second/third try) MSI Gaming Motherboard http thepcenthusiast com msi- PC doesn't boot up at first try (but always does at second/third try) -gaming-am -motherboa - XFX ATI Radeon HD GB DDR - G Skill Ripjaws X DDR PC - GB CL x modules of GB Dual channel in slots amp - Hard Drive SATA II WD EADS- M B TB - Win - bit Some screenshots CPU-Z confirms I m running at mhz MSI Command Center does not get accurate frequency readings Thanks in advance for all the help If I forgot to mention something please tell me nbsp

A:PC doesn't boot up at first try (but always does at second/third try)

Check and make sure the wire cables are connected properly and not loose. Also, can replace CMOS battery and see you may able to access your computer.

P.S. Also check that the hard drive connection is set to UEFI under BIOS connection settings. Windows 8/8.1 supports only secure booting.

Good luck though!!
 

http://www.techspot.com/community/topics/pc-doesnt-boot-up-at-first-try-but-always-does-at-second-third-try.205119/
Relevancy 15.48%

I have this flash drive:
http://www.amazon.com/PNY-Turbo-Performance-Drive-P-FD128TBOP-GE/dp/B00FE2N1WS

And I am afraid it is dead. When I plug it in, 50% of the time, the red light constantly flashes at about 8 flashes a second, or flashes 3-4 times quickly before just shutting off and nothing happens.

If it is in constant flashing mode, I can open my windows explorer and see "Removable disk", however it is slightly transparent, and when I try to open it, it says "Please insert a drive", which leads me to believe the computer detects it, but can't read it. The properties window shows 0 bytes. Is there any hope at all of getting my ~65gb of used data off of this thing at all? Do I have to take it apart and do some soldering? Please help.
 

A:PNY 128 GB Flash Drive not working

Your flash drive probably has a damaged controller. If that data is important, best chance of retrieving your data would be a professional data recovery service. The cost of recovery depends on how extent is the damage of your disk.
 

http://www.techspot.com/community/topics/pny-128-gb-flash-drive-not-working.204524/
Relevancy 15.05%

So, when I built my PC I installed the OS on a HDD drive with the thoughts that I could later transfer it to SSD,

(did it before using hard drive cloning software to copy the OS drive to a new drive and then once working formatting the old drive.)

however when I started doing some reserch on cloneing software I noticed that windows 7 might not be cloneable (my past experiances are with XP) since there are mixed reviews on each bit of software out there both on Amazon and on the web. sevral report that windows 7 sees the clone as an unlicenced copy and refuses to boot. others say the clone drive misses it's boot file.

can some people advise me on if any of these facts are true or not?
 

A:Hard drive migration to SSD questions

Hi.
Cloning should work fine if you do it properly with windows 7. It's possible that windows can throw up a licensing issue, but very unlikely. In the event that it does, call Microsoft and they should be able to get it sorted out for you.

As for the bootability of the drive, cloning the drive's data does not necessarily make it bootable, but if you look online you'll see some cloning tutorials that include a section for rewriting the MBR on your SSD to make it the primary bootable drive in case it ends up not booting properly. This isn't hard to do and usually isn't a necessary step.

Also just keep in mind that simply cloning the SSD will probably result in an unaligned drive, so make sure that you get it properly aligned. Some cloning software has an aligning option built into the cloning process that you'll want to select.

So go for it and come back if you're having any issues.
 

http://www.techspot.com/community/topics/hard-drive-migration-to-ssd-questions.204382/
Relevancy 15.48%

Okay, okay, I know that most of you stopped using floppies long ago. But my question is: I was about to buy a Buslink external USB floppy disk drive (brand new, still sealed) from someone on Craigslist, and just wondered if it's a decent brand.

And would have I have by anything extra, other than perhaps a cord? Never done this before.
 

A:Is Buslink an okay brand for an A-drive?

I'm sure it is fine, the technology in those hasn't changed since about 1992, lol. The only thing that is different is the USB interface. The drive alone should be enough, I don't think USB Floppys needed external power.
 

http://www.techspot.com/community/topics/is-buslink-an-okay-brand-for-an-a-drive.204731/
Relevancy 15.05%

Hi, I have a Verbatim Store n' go ex hard drive which used to work perfectly with usb 3.0 and 2.0. A few weeks ago it stopped working with 2.0 and now not even with 3.0. When I plug it in the hard disk starts to rotate and lights up normally, but is never shown on the drive list. The computer doesn't even do the beep sound when a usb device is connected. I tried on 2 different pc's but they show no result.

Any kind of help is greatly appreciated
 

http://www.techspot.com/community/topics/external-hard-drive-failure.204788/
Relevancy 15.05%

Hi Frnds

I hav a Toshiba 1 TB external HDD. It was working fyn till today. Now it is not showing in My Computer or Disk Management. It does make the sound when I connect or disconnect it from the laptop. and the HDD light remains on.

Please advise how to fix this

Thanks
 

A:Toshiba external USB hard drive not detected in any laptop

Go under the Device Manager and uninstall all the USB Controllers then reboot your PC don't connect the 1 TB just yet. Make sure nothing is connect to those ports like a keyboard or mouse otherwise they'll lockup. Once rebooted Windows will rebuild the table for USB Controllers. Now you should be all set. Unless you have some sort of conflict with IRQ or Registry setting. There is a free app called USBDVIEW what you would do is disconnect from all non-disconnected USB devices that are stored on the PC these settings can cause all sort of issues.
 

http://www.techspot.com/community/topics/toshiba-external-usb-hard-drive-not-detected-in-any-laptop.173740/
Relevancy 15.05%

My bother had deleted my laptop partition files and folders when attempting to extend my C partition. All my stored partition movies were lost and could not be found in Recycle Bin. Do you know where these partition videos are? I really want to view these videos again. What can I do to rescue them? Thank you for any advice!
 

A:Delete hard drive partition data

Hey, Luminaton03!

Sorry to hear you are experiencing such an issue.
Your data is stilll there somewhere as long as you don't overwrite it. If you save new data, it would rewrite your previous files.
I did some research for you and I found a threat that you might find helpful:
http://answers.microsoft.com/en-us/...back-the/a003d747-b760-42a7-819b-0235e8ec6d2c

I really hope this works for you!
Good luck!

SuperSoph_WD
 

http://www.techspot.com/community/topics/delete-hard-drive-partition-data.204583/
Relevancy 15.05%

Hello,

Is there any difference between software which are used for recovering data from HDD or flash memory drives and SSD? For example, can we use of the apps used for HDD to recover data from SSD too?
 

A:Solid state drive data returning

I do not see why the HDD programs shouldn't work for SSDs. Maybe @jobeard can weigh in if I am wrong. I would check out this article.
 

http://www.techspot.com/community/topics/solid-state-drive-data-returning.204388/
Relevancy 15.48%

I'm trying to partition my hard drive, when I click shrink, it takes me to the shrinking window and it says:

Total size before shrink: 704749 MB
Size available to shrink: 7185 MB
Enter the amount of space to shrink: 7185 MB
Total size after shrink: 697564 MB

I don't understand how I have so much space, but I can only shrink it 7185. It is an NTFS.
Here's some screenshots
 

A:Why can't I partition my hard drive more?

Some files that are read only are preventing you from shrinking beyond a certain point while those files are open.

My suggestion would be to use partitioning software that is bootable. Boot to the disk and shrink your partition without windows running.

There are several freeware apps available to select from. The one I use is Partition Wizard Boot CD.
 

http://www.techspot.com/community/topics/why-cant-i-partition-my-hard-drive-more.204093/
Relevancy 15.48%

My hard doesn't show up anymore.when I plug it in I hear 2 beep sounds coming from it and then nothing.any one now what the problem might be.
 

A:WD external Hard drive

Probably an internal hardware failure on the drive. Hope you had your data backed up from that drive.
 

http://www.techspot.com/community/topics/wd-external-hard-drive.203951/
Relevancy 15.05%

Tried just about everything but I still can't seem to get my external hard drive to show up in my disk management or computer. It say it's installed and ready to use but I don't see it.. only in the device manager and in devices and printers I can see it.. but nowhere else.. I'm working with windows 7 upgraded from windows xp but has be downgraded which was originally windows vista I think.. A friend gave me a computer and I had it upgraded.. can any one help me get my computer and external hard drive straight. Thanks.
 

A:Don't see my external hard drive in disk management or on computer

Check this thread out: http://goo.gl/rxkBN
 

http://www.techspot.com/community/topics/dont-see-my-external-hard-drive-in-disk-management-or-on-computer.203836/
Relevancy 14.62%

The Seagate Momentus 5400.6 hard drive I'm using is from my old laptop it has 4 disks.
After I put it in the (IT-CEO IT-700) enclosure, and connect it to my new laptop it does not show up in 'My Cumputer' and 'Disk Management', but displays in the 'device and printer' section of control pannel.
I also can't eject the hard drive, even when I'm not doing anything to it, the (IT-CEO IT-700) enclusre's blue signal light just keeps flashing for a while then goes off for a sec, then resume flashing again.
My laptop also keeps trying to install the hard drive.

I tried reinstall the hard drive's driver, but that did not solve the problem.

Please Help.
 

A:External Hard drive not showing up in 'My Computer', and 'Disk Management'

Have you tried using different drive enclosure other than the IT-CEO IT-700?
 

http://www.techspot.com/community/topics/external-hard-drive-not-showing-up-in-my-computer-and-disk-management.201875/
Relevancy 30.1%

On my hp laptop pavllion. Noinstructions came with it
 

A:How to replace keyboard

Google: "replace keyboard HP pavillion model_number"
 

http://www.techspot.com/community/topics/how-to-replace-keyboard.203766/
Relevancy 15.05%

I have a Dell Precision T which I just purchased off of Ebay Recognized Possible Hard Formation, Second Not Drive Raid It came with gb of ram and gb hard drives installed In quot my computer quot it shows drive quot c quot but not the second drive This computer supports raid configurations but when I received it it had no operating system installed I installed windows ultimate bit This computer has quad core processors and I have been noticing a Possible Raid Formation, Second Hard Drive Not Recognized slower response time lately which leads me to believe it may be in one of the raid modes even though they are supposed to be faster most of the time Possible Raid Formation, Second Hard Drive Not Recognized I went into the bios and the setting it is on is to automatically detect raid configuration in the drives and if not detected the regular mode I read some information about raid setup and cannot find the software quot Intel Matrix Storage Console quot on the computer to help verify or change settings Could this be an extra program like drivers that are downloaded from the Dell website because they don t normally come with a regular windows install If someone is familiar with configuring raid formations could you please help me determine what my system is set on and how to set it properly I would be satisfied to not have raid active as I don t need that kind of constant backup My work is not that important I can back up important files in other ways nbsp

A:Possible Raid Formation, Second Hard Drive Not Recognized

What shows up in the Disk Manager vs the Device manager?
 

http://www.techspot.com/community/topics/possible-raid-formation-second-hard-drive-not-recognized.202015/
Relevancy 15.48%

My External hard drive wont open without format I try doing format it gets stuck I try opening computer > mange > disk management it wont open unless I take it out and gets stuck and gives me connecting to virtual disk service
please please help me! im freaking out I need this hard drive to work I need help
 

A:External hard drive

If you need this drive because there is data on it, formatting is the last thing you want to do.
 

http://www.techspot.com/community/topics/external-hard-drive.203628/
Relevancy 15.05%

Recently a hard drive named OS (X: ) (space inserted so it isn't posted as a smiley face) appeared in my computer. It seems to be identical in memory to my actual hard drive, but is actually empty. What exactly should be done about this?





 

A:Empty extra hard drive?

Not sure off hand but I'd open up Disk Management to see what it says there.
 

http://www.techspot.com/community/topics/empty-extra-hard-drive.203533/
Relevancy 15.05%

Hello,

Old Dell computer running Windows XP that was never backed up and I am trying to recover files and photos. I get NTLDR is missing when I boot. I've used Testdisk/Photorec to try to recover my data but when going through the recovered data it seems to be all system files that I know nothing about. I used Ubuntu on the Dell to run Testdisk. I also hooked up the hard disk to my laptop with a hard disk adapter and got the same results.I also ran a NTLDR boot disk but ended up with the same NTLDR is missing message. I dont have a XP recovery disk. Anybody that has had this issue please help!
 

A:NTLDR is missing. Hard Drive Failure.

Trobles86 said:





I also hooked up the hard disk to my laptop with a hard disk adapter and got the same results.Click to expand...

If you have access to another PC or laptop then you can connect the hard drive in to that machine and get the files you wanted to recover from your hard drive in there.
 

http://www.techspot.com/community/topics/ntldr-is-missing-hard-drive-failure.203104/
Relevancy 15.48%

Hello I have just removed much malware and viruses from a computer with windows vista. It is still running slow from time to time, having problems with freezing on the internet and I thought maybe by defragging it would fix the issue. Yes I have reset firefox many times, scanned many times fully for viruses and malware, removed and reinstalled flash player, etc. I need to first backup the C drive only because the D drive is full of crap. I cannot afford to do anything other than DVD-R to store it on. I am trying to find out how to do this. Is anyone familiar with such a process?
 

A:How do I backup C drive from Vista to DVD-R?

First, run CLEANMGR for each login on the PC and that includes Administrator.
This reduces the amount of data captured to at least active & meaningful.

Second, IMO backup \Users and forget all else
 

http://www.techspot.com/community/topics/how-do-i-backup-c-drive-from-vista-to-dvd-r.202672/
Relevancy 15.05%

I have 64bit Win7 Home. My C: boot drive is a 120GB SSD with most of my programs installed on an ordinary HDD, saving the SSD for frequently used stuff.

I bought a duplicate SSD (same brand/size/model) for the purpose of creating a Raid-0 array.

I've backed up everything on my SSD, but how do I restore it once I setup the Raid?

Thx.
 

A:Moving single C: drive to Raid-0

Copy/paste?

Or create image of the SSD, then apply it to the raid partition.
 

http://www.techspot.com/community/topics/moving-single-c-drive-to-raid-0.203051/
Relevancy 15.05%

I am a beginner of hardware. I find two series of SSD to compare, 840 EVO and M500, because the specifications and the prices of them are approximate.

Both of them use SATA 3, so you need to compare with the read speed and the write speed, if you prefer faster one. The sequential read speed of 840 is 540MB/s, and the sequential write speed is 410MB/s. M500 is slower, but the performance of M500 is great as well, its Shock-resistant design makes it more durable than 840. The most important thing of SSD is the controller, 840 uses 3-core Samsung MDX controller, M500 uses Marvell?s latest controller, maybe the second one is better.

This is my poor review, how to compare them with more details, give me your advice.
 

A:The comparison of hard-state-drive, Samsung VS Micron

Read in-depth reviews such as this:
http://www.techspot.com/review/709-samsung-840-evo-ssd/
 

http://www.techspot.com/community/topics/the-comparison-of-hard-state-drive-samsung-vs-micron.202945/
Relevancy 15.48%

when i start my computer, it goes to the gateway start page, and after a while (it's quite slow) it goes to the black page, and this is what it says:

Intel Boot Agent FE v4.1.10
Copyright (C) 1997-2003 Intel Corporation

Intel Boot AGent PXE Base Code (BA 1210BC-GW1)
Copyright (C) 1997-2003 Intel Corporation

PXE-E61 media test failure check cable
PXE-M0F exiting Intel Boot Agent

Reboot and select proper boot device or insert boot media
in selected boot device.

it just stays on that screen until i do a CTRL ALT DEL, then it goes back to the Gareway screen and after about 30 seconds finally boots up and i get the Windows XP start up page, and it opens up my desktop and i can continue .

Can anyone tell me why this started happening and how to correct it?
 

A:Computer start up is bringing up boot agent message

How old is the computer, or the hard drive. It appears you have a failed or failing hard drive.
 

http://www.techspot.com/community/topics/computer-start-up-is-bringing-up-boot-agent-message.150663/
Relevancy 15.48%

Hi Im new here and im hopeless hope u can help me, !st sorry because I cant find in forum on my problem. well here it is..

I have Samsung 900x New series 9.0 Usb slot is 3.0. just a simple problem but for me its big problem, I cant install any of my 6 pcs usb all is 2.0, It detect yes in device manager but cant install while im updating driver so my laptop can install what usb I inserted, It says error code 28. acess denied, so I cant install any of my flash drive including my external hdd 500gb, pls can someone help me.. I already search to google but non of it helps.. Thanks very much! hope to hear from you guys,
 

A:USB Flash Drive U2 to U3 slot

Can you please provide more specific information of your laptop's specifications and operating system used.
 

http://www.techspot.com/community/topics/usb-flash-drive-u2-to-u3-slot.201977/
Relevancy 15.48%

Hello all!!!! My name is John. I am trying to find some help with an issue that arose after I installed a new hard drive in my computer. I started getting a message that stated:

C:\Users\Owner\App Data\Local\Conduit\API Support\API Support.dll

Anyone know how I can repair this? I saved an image of my system before installing the new hard drive and then just downloaded the image to the new hard drive. HELP!!! please!!
 

A:Installed new hard drive

You might just need to run some registry cleaners to fix and remove those corrupt registry keys.
 

http://www.techspot.com/community/topics/installed-new-hard-drive.201991/
Relevancy 15.05%

My computer recognizes that the hard drive is there as local disk E but wont actually load. I can get it to load on my tv but it wont play my movies. Please help it has a lot of important things on there,
 

A:External Hard drive not loading

You could try running chkdsk /f in command prompt to check and fix errors on your drive.
 

http://www.techspot.com/community/topics/external-hard-drive-not-loading.202166/
Relevancy 30.1%

I have a HP a1020n Pavilion I use to do audio reconditioning on, it's running WinXP. I've maxed the memory and have a terabyte drive installed already. My question is; should I bother to try to upgrade to Win7 and add a DirectX 9 video card and a better audio card to replace the onboard chip or just junk it and buy something newer with Win7 packaged with it? I've read one thread here by someone trying to install an upgraded video (Upgrading video card on HP Pavilion a1020n with ATI Radeon X1600 Pro PCI-e) and it doesn't paint a very good picture of trying to do any of this. Any thoughts/advice are appreciated.
 

A:To Replace or Upgrade?

It isn't worth the money to upgrade in exchange for the performance increase you would get.

What do you audio reconditioning with? What software? Potentially you could scrap XP, install Linux and use Audacity. Only costs you your time, no money.

I've done a fair bit of audio reconditioning of speeches recorded on cassette tapes with Audacity.
 

http://www.techspot.com/community/topics/to-replace-or-upgrade.201671/
Relevancy 15.05%

I have had a look round the posts but nothing I try stops the internal drive getting accessed.
I have unchecked the CD autorun using TweakUI (this worked for someone else)
I have temp disabled AVG along with BoostSpeed and Team Viewer
The only process running apart from sys idle is svchost.exe (1%)

I hope someone out there manages to work their magic as they did the last time I posted here!
Thanks
 

A:Hard drive light flashing with nearly no processes running

Sounds like the System Index service is running.

When you find that happening, disconnect from the Internet to be sure MS Update is not running or something on your system is phoning home to be sure.

To see all Internet connections from your PC, grab a copy of CurrPorts - - runas admin and you will see everything. Click on the column heading Remote Host Name to get active connections at the top if the list. The menu Options is used to customize the display; here's my list

display Listen, Established, TCP, UDP, IPv6,

display port in The Address,

sort on refresh,
Ask Before Any Action
That last one is interesting; running as admin, you can Close a port or Kill the application with that port.

CurrPorts identifies all ports on the pc (mine number 112 as I write) and if I select all ports with a Remote Address, I see I have 20 connections.

btw: Remote Addresses shown as 127.0.0.1:nnn are local services (like a proxy or AV service), so out of the 20, only two are actually remote - - both HTTP browser connections.
 

http://www.techspot.com/community/topics/hard-drive-light-flashing-with-nearly-no-processes-running.202265/
Relevancy 15.48%

Hello. recently I have been getting the Drive e needs to be formatted before it can be used. However, I have no drive e. there are no flash drives or sd cards plugged in, its a laptop so it has the normal c drive and the system d drive (ie 1 hard drive). I have no dvd drive as I have removed it because it has been causing problems. in disk management it has drive e there, but no name to it and it is in the raw format. any idea as to how to remove this nuisance?

Windows 7 32 bit pro
hp pavilion dv6700 laptop
 

A:Format drive E

Just format it, you shouldn't get further prompts. Then you can see if it's another partition on your main HDD or not.
 

http://www.techspot.com/community/topics/format-drive-e.201098/
Relevancy 15.91%

Hi everyone, I have a problem.
I pinmodded an LGA771 Xeon to work with my LGA775 motherboard. I decided to do it the hard way and use aluminum foil and tape to pin mod it. I think it worked out fine but anyway, on to the problem.

When I cut off the LGA775 alignment pieces, I accidentally bent 2 pins out of shape a little. Initially, I didn't notice, so I put in the Xeon to try it out, didn't work.
Then I tried my old processor, also didn't work (worked fine previously).

So then I noticed the pins and bent them back into shape, AFAIK it is perfect and you can't even tell that anything happened.
Tried both CPUs, nothing, no beeps, no signal to the monitor.

Is it possible to damage my motherboard if I didn't do the pinmod correctly?
Is it possible that I damaged my processor or motherboard by trying to run it with those 2 pins out of place?

Help please
 

A:Bent motherboard pins, fixed but now will not boot

I am not really sure, but my guess is you did not do the pinmod correctly since both CPUs do not work. I hope someone else can provide some insight on this issue. Good luck!
 

http://www.techspot.com/community/topics/bent-motherboard-pins-fixed-but-now-will-not-boot.198999/
Relevancy 15.48%

Hi, I have problem with my flash drive. It just won't load, I tried everything, and still nothing.
Here is some pictures that can help.. I think..








 

A:Problem with Flash Drive

Windows installs multiple drivers for this device. This is the 2nd driver (that's failing to install). The first will be listed under USB in Device Manager. By default, Device Manager only displays a device when its connected.

Plug in/remove your device and look for a device appearing/disappearing under USB. It'll probably be a USB Mass Storage device. (Maybe a USB Composite). When you find it, right click it Properties->Details tab. Use the pull down menu to select Hardware IDs. Copy/paste what you see in your next post
 

http://www.techspot.com/community/topics/problem-with-flash-drive.201684/
Relevancy 15.48%

Greetings all The DVD RW drive on my HP Pavilion dv series us is not working Please find the relevant details below The drive is Model TS-L N HPMH - I think this is Toshiba It s detected in My Computer as HD-DVD ROM When I try to play a CD DVD the light comes on and spins but then shows quot Please insert drive not as DVD ROM CD working - shown a disk into HD DVD-ROM Drive F quot DVD drive shown as CD ROM - not working The Device Manager detects it DVD drive shown as CD ROM - not working as a CD ROM and obviously the Windows generic driver doesn t work The Device Manager picks it up as an quot Unknown Device quot and is shown as quot NCB XYB QNKX SCSI CdRom Drive quot The driver is not available on the HP site so tried the regedit option I believe I deleted all the strings associated with the driver key Then tried the Microsoft tool which must have installed the generic driver which causes the DVD drive to be recognised as a CD ROM instead I tried the sfc scannow as well and it shows that there are corrupt files which could not be fixed The laptop works well otherwise Please help Where can I find the driver for the drive How can I go about fixing this issue nbsp

A:DVD drive shown as CD ROM - not working

List any Problem devices

Make sure devices are connected and powered on
Click the Start Orb, type msinfo32 in the search box. Hit Enter
Click the + sign next to Components to expand it
Click Problem Devices. Anything appear?
If yes, click on it, Ctrl-A to select all, Ctrl-C to copy it, Ctrl-V to paste into next post
On the other hand, if no devices are listed, tell me so

 

http://www.techspot.com/community/topics/dvd-drive-shown-as-cd-rom-not-working.201725/
Relevancy 15.05%

I have to say I am a little worried about my hard drive. Often I bought it for the purpose to protect my game videos, and some program files. For a long time, it behaved rightly with my HP windows 7 desktop when directly used. Sometimes ago I decided to let this old PC alone and bought a Macbook pro. The latter has no such a SATA interface for me to input the data from this drive. For the convenience, I borrowed this SATA dock from my brother . ( I have to admit previously I once use another dock to exchange the data . )

My mac just could not recognize my drive as a normal one. I am not sure where the problem lies in. The key is that other drives have no similar issue with this dock. I wonder if anything happen before in the process I handle the data with another dock.

Grateful for any advice.
 

A:Previous WD hard drive 500GB could not be recognized as it always

Yeah. At present I have no such another one to have a try. I will turn to my friend see if any gadget he has to test my drive.
 

http://www.techspot.com/community/topics/previous-wd-hard-drive-500gb-could-not-be-recognized-as-it-always.201163/
Relevancy 15.05%

Okay not really very good at this but my laptop stopped working so I took hd out and connected it to anotherlaptop through usb lead it appears in my disk management (although it shows up grey instead of black or blue if that makes sense to anyone) but it wont show in my computer I have a load od family photos on this drive and would really love some help and will send out good karma to all who try to help me many thanks in advance
 

A:Trying to recover data from crashed hard drive

Hi techmichellenot. When you say it stopped working,is there anything on the screen when you power up, or any indication that the system passed it's POST procedure (Power On Self Test), usually indicated by a beep before Windows itself tries to boot up?. Any error messages seen?. Sounds like you put the drive in an external case that can connect via USB. If there is indeed a problem with the disk drive and it's not a physical problem with the drive (maybe a corrupted Windows boot file,etc),your system may have a Recovery procedure that will reinstall your OS without erasing your data files (called a non destructive OS reinstall) as opposed to a destructive which erases everything and reinstalls the OS. I would check your documentation to see if your laptop has such a procedure.
 

http://www.techspot.com/community/topics/trying-to-recover-data-from-crashed-hard-drive.189487/
Relevancy 15.48%

My partner's laptop HP 0700 Notebook will not boot up and just comes up with the above message. We found an HP troubleshooting site which said to reset the BIOS default settings by pressing the Escp key, F10 followed by F9 to reset. Then it said to press the F2 System Diagnostics keys which tested the hard disk and all the tests came out OK. When we tried to restart it, it came up with the same message and we have noticed that before it comes up with this message it says in the bottom left-hand corner "Prepare boot to OS" and then comes up with the message in the heading. We have not bootable disk as the laptop already had everything installed.

Coupled with this my partner's virus protection is coming up with "Threat detected" every minute on practically every site my partner visits on the Internet. You will appreciate that we cannot run any virus checks as we cannot get into the computer.

Any suggestions would be very much appreciated.

Compused
 

A:No bootable device - insert boot disk and press any key

Any luck with this?
 

http://www.techspot.com/community/topics/no-bootable-device-insert-boot-disk-and-press-any-key.201065/
Relevancy 15.48%

Hi all!
C drive on my computer is almost full, I keep receiving notifications regarding no or less space in C drive. I have Partitioned my hard disk into 3 parts.
C drive is only 25 GB :/
D drive is 80 GB
E is close to 150 GB

I would like to increase my C drive space from 25 GB to 100 GB cutting E drive down . I am unable to do so through disk management. The option Extend Volume is grayed out. Please suggest an alternate way to increase the volume of my C drive. The OS I have is Windows 7 ultimate!!
Thank you in advance.
 

A:How to increase volume on C drive

0. Make sure you have everything you can't afford to lose backed up.
1. Get Easeus Partition Master (the free one for home use)
2. Shrink E
3. Expand D
4. Shrink D
5. Expand C

Partition Master may let you just shrink E and expand C, but if you have a traditional partition layout the steps I listed will have to occur (even if PM hides the middle ones).

Personally, I would do 1 step at a time and reboot between each. This way if something goes wrong your chances of recovering are much greater.
 

http://www.techspot.com/community/topics/how-to-increase-volume-on-c-drive.200779/
Relevancy 15.48%

Do you know how to increase my C drive without deleting some important data or programs? In fact, yesterday, when I attempted to install a newly download program, a message popped out and told me there was a low disk space problem. I had also checked my C drive space. There was really 597MB of free space left. So, I just want to increase this drive successfully. Do you how I can do that? Any advice could be greatly appreciated here. Thank you!
 

A:How to increase my C drive without deleting something?

Open up My Computer and tell us if there is any available space on another hard drive.
 

http://www.techspot.com/community/topics/how-to-increase-my-c-drive-without-deleting-something.200953/
Relevancy 15.48%

I put together a comp. with parts of my brothers old comp. For my brother to have a new 1 ,but he wanted programs like office "which is on his old Hard drive" and my widows vista business that I have doesn't have office . So I thought maybe I could put his old hard drive as a slave drive and he would have all his old programs ,but it say's they won't run on that OS. Is there any way around this or am I better off getting office somewhere and fresh installing it ?His old Comp. was a Dell.
 

A:Running off slave drive

What you want to do can't be done. Has to be installed on that Windows install.

Does he really need "Microsoft Office"? because there are a few pretty solid free office suites out there, just for some of the more complex formatting causes problems sharing with people that use Microsoft Office.
 

http://www.techspot.com/community/topics/running-off-slave-drive.200846/
Relevancy 16.34%

Model dx -ub gtx ti evga win Today my brother was granted a hand-me-down gpu from a good friend of mine and after attempting everything I know installing the card computer visuals boot on No nothing seems to work I get no visuals boot The card seems to power up the heatsink at least but the card still gives no visuals Installing the card was goofy as all hell For some reason when apparently fully seated the end of the card where the ports are refuse to line up properly There is about maybe a quarter of a No visuals on computer boot inch gap Seeing this makes me assume it is definitely not No visuals on computer boot seated correctly I re-seated about plus times it does not want to go in correctly or so it seems I am starting to think the gpu is far to big for this moba or the case is just poorly made On top of everything the computer does not detect the gpu in any form on device manager or any other program Installing the drivers won t work because it doesn t detect the gpu as well Could it be a faulty psu - idk Maybe the gpu just went because it was nold - idk All I know is this is a friggin pain maybe someone could help me out The gtx ti was working on the current day when it was in my friends computer And yes I have plenty of power wats it was the same power supply from said friend s computer nbsp

http://www.techspot.com/community/topics/no-visuals-on-computer-boot.200851/
Relevancy 15.48%

Hi all I have custom built pc and in last month now and then it switches off I believed it to be a faulty psu but now ive notice blue screen couple of times I looked it up and it points to faulty hard drive .also on restart I get few chkdsk .so I thought ok I got spare harddrive ill clone main one on to that and use that but when I plug it in it shows up but making a weird noise, also secured by bit lock,, I put password in and then it dissapears with error something like cannot be specified ...does this mean both hard drives have failed or could it still be psu maybe not giving enough power..thanks in advance.. any more info please ask
 

A:Hard drive fail

A noise coming from the hard drive you replace is faulty,,, it's indicates mechanical failure..you better buy new one...
 

http://www.techspot.com/community/topics/hard-drive-fail.200737/
Relevancy 15.48%

I have had this laptop for several years but recently the cd dvd drive has stopped reading discs In the past couple of months it has gone from sometimes reading a disc to not reading any disc I try putting in I have tried using different discs and lately it has not been reading any of the ones I try I have tried uninstalling the driver and restarting my computer but that hasn t helped reading CD/DVD not drive discs I tried to update the driver from the device CD/DVD drive not reading discs manager but it just tells me that I have the current version From what I can remember I started noticing the problem soon after I installed VLC media player but I m not sure how to determine if that is causing the issue or not CD/DVD drive not reading discs I have also tried to delete the Upper Filters from the registry but I can t find the files named quot Upper Filter quot or quot Lower Filter quot Earlier this week a co-worker suggested I try one a cleaning cd that has little brushes on it to clean the lens in the drive but I am a little hesitant about that but I am willing to CD/DVD drive not reading discs try it Just last night I tried wiping the lens with a cotton swab Q-tip with a little bit of rubbing alcohol on it to see if that would help but I am still having trouble today My computer is a Dell Insprion running Windows -bit In the device manager under DVD CD-ROM Drives it has quot HL-DT-ST DVD -RW GT N quot If there is any other information that would help I will do my best to find it but I am not very computer-literate Thanks for taking the time to read through all this nbsp

A:CD/DVD drive not reading discs

First see if you can boot your computer from CD. If you can't, then your drive is shot
 

http://www.techspot.com/community/topics/cd-dvd-drive-not-reading-discs.200504/
Relevancy 15.05%

HELP!!!

I have a 500gb external hard drive which, up until a few days ago, was working absolutely fine.

When I would plug it in to my laptop the device was found under 'my computer'.but would not open. Instead when I tried to open it my computer froze and the 'not responding' message was shown, resulting in a forced close of my computer. Now when I attach the hard drive and open 'my computer' the hard drive does not show at all, but 'my computer' still shows the message 'not responding', resulting in a forced close.

I've been on to a couple of forums already and tried the route of right clicking 'my computer', 'manage' and 'disk management'; but the hard drive does not appear there.

I'm at a total loss what to do and would massively appreciate your help as I have backed up company data on to this hard drive.

Thank you in advance!
 

A:External hard drive not showing in My Computer

Hey pcrquals. I would try the drive in another pc to narrow down where the problem is, a problem with the drive itself, or a problem with the pc recognizing the drive, which might be a problem with the USB port(s) or with the USB drivers. Does another USB device like a flashdrive work when plugged into the same port?
 

http://www.techspot.com/community/topics/external-hard-drive-not-showing-in-my-computer.191206/
Relevancy 14.19%

I just got new SSD - Transcend 128GB. Installed Windows. When I cold boot my PC -- from a shut off state -- I get this message before Windows loads: "Reboot and select proper boot device or insert boot media in selected boot device and press a key."

However, if I press Ctrl+Alt+Delete and reboot I come into Windows.

If I enter BIOS from cold boot, it does not detect my SSD. After rebooting it detects my SSD. Seems like the SSD is slow at firing up?

I have run chkdsk and memory test without any errors.

My motherboard is the MSI Z87-G55.
 

A:"Reboot and select proper boot device"

Just installed newest BIOS, it didn't help.

When I go into Board Explorer in BIOS it says SATA port 1 is empty. After reboot it says the same port is occupied by my SSD.

Update: Plugged in another hard drive (non-SSD). Same rules apply to it. On cold boot, none of the drives are detected. After reboot, both drives are detected. I used a non-SSD as system drive before this, worked perfectly.
 

http://www.techspot.com/community/topics/reboot-and-select-proper-boot-device.200351/
Relevancy 15.48%

I have an external WD hard drive, I accidently removed the network file and folder sharing componet. Now when I go to access my hard drive it tells me that access is denied. I dont want to lose the data. Is there a way to restore this opion and gain access? PLease help. I oringially was trying to limit access to this hard drive.
 

A:WD external hard drive

Google How to Take Ownership for the instructions your version of Windows. Try taking ownership of files/folders on the drive
 

http://www.techspot.com/community/topics/wd-external-hard-drive.200328/
Relevancy 16.34%

So I installed a second Hard drive this weekend. And I want to create a new partition on the new hard drive, which will hold my boot files. So I want a partition of my second hard drive to be my main boot device. (Like 20gb)

Then I?m going to combine my first hard drive, and the remaining space left into 1 partition.

My Local disk has my Boot, Page file, and Crash dump. I want to move this to my new partition. (Second HD)

I tried moving the entire windows file in my local disk to the second hard drive, half way through it wouldn?t allow me to move all of the files.

How do I do this without re-installing windows?
 

http://www.techspot.com/community/topics/changing-boot-drives.200248/
Relevancy 15.05%

We have a new Dell Precision laptop but cannot get two of our USB flash drives (both Lexar Jumpdrive SecureII Plus) to work. They work on our other computers. We can connect other USB devices to the new laptop, including an older flash drive. Strangely, if the problem drives are plugged in before the computer starts they will open properly - but I cannot remove them and plug them in again later.

They do beep every so often. USB Mass Storage shows up in Device Manager, with the warning exclamation. Disk Management will briefly show a disk (1 or 2) with "no media"; sometimes it will disappear then reappear for a second or so.

I have checked for USB driver updates, uninstalled and reinstalled USB hubs shown in Device Manager (though I'm plugging directly into the side of the laptop). I do not understand what would cause these drives only to not work with this computer only.
 

A:Some usbs drive fail to open on newest computer only

I forgot to mention: the laptop is running Windows 7 Pro.
 

http://www.techspot.com/community/topics/some-usbs-drive-fail-to-open-on-newest-computer-only.199812/