Windows Support Forum

Razer Onza or Microsoft controller for Windows?

Q: Razer Onza or Microsoft controller for Windows?

I've been playing games for more than 12 years with KB+Mouse and have never used a controller before. Games are becoming more and more controller optimized and I have an Eyefinity setup that would give a better experience with a gamepad, so I decided to get one

I've narrowed my options to Razer Onza TE BF3 Edition (Wired):

http://store.razerzone.com/store/razerusa/en_US/pd/productID.235034100/categoryId.54297600

And Microsoft Xbox 360 Wireless Controller for Windows :

http://www.amazon.com/Microsoft-Xbo...d-20&ref=sr_1_3?ie=UTF8&qid=1322381006&sr=8-3

They both seem pretty good, but have heard very mixed views on razer products...

Which one is better ?

Relevancy 100%
Preferred Solution: Razer Onza or Microsoft controller for Windows?

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Razer Onza or Microsoft controller for Windows?

Do you already own a wireless 360 controller? You can use a 360 controller on your PC if you add one of these. I use it and it works fine.
http://www.amazon.com/Xbox-360-Wire...FCT2/ref=sr_1_1?ie=UTF8&qid=1331256805&sr=8-1

http://www.techspot.com/community/topics/razer-onza-or-microsoft-controller-for-windows.178459/
Relevancy 63.64%

hello, i have been using windows 7 for almost 3 years now, and i had a xbox controller and razer keyboard in the usb slots, and the keyboard isn't working when i take you the xbox controller or vice versa. the keyboard works when i am in windows system repair, but not on the password screen. please help

A:driver issue with razer keyboard and xbox controller?

Hit F8 on startup then enter on "Disable Driver Signature Enforcement"
You can also uninstall the driver for the keyboard and controller and re-install using Device manager.

http://www.sevenforums.com/drivers/367415-driver-issue-razer-keyboard-xbox-controller.html
Relevancy 59.34%

Hello,
I just bought a Razer Reclusa keyboard and the only problem I'm having is that it does not "power up" so to speak until after post. If I needed to get into the BIOS I could press [del] a million times and nothing would happen. Once windows starts up, it works fine. Is this just the way the keyboard is? I'd appreciate any info.
Thanks.
 

A:Microsoft Razer Reclusa Keyboard

Haven't looked up that keyboard, but I think I know what it is (the fix) anyway.

You need to get into your BIOS (with another keyboard, ideally PS/2 if you have the connection)
Then set Enable for USB Keyboard/Mouse support

I think that may be a bit of a mind teaser to do, but I'm sure you'll work it out
 

http://www.techspot.com/community/topics/microsoft-razer-reclusa-keyboard.109352/
Relevancy 57.19%

I wonder if anyone knows if DeathAdder and Tarantula going to function if I install Windows7 64bit?

A:Razer DeathAdder and Razer Tarantula Windows7 64bit

Here is an article from Razer. They state they will be offering windows 7 drivers before the Windows 7 launch on the 22nd. So I would have to say that they should work. The models you are inquiring about are on the list. Razer & Windows 7 | Razer - Windows 7 Updates

http://www.sevenforums.com/drivers/32455-razer-deathadder-razer-tarantula-windows7-64bit.html
Relevancy 55.9%

Hi all. I have just got windows 10 and after installating it I installed common programs that I use. I went through them a bit fast though and am now have problems with my xbox 360 controller. I have a wireless receiver that I got on ebay and it's not the official one. While installing the drivers for the receiver rather than clicking 'choose my own driver' and choosing 'Microsoft common controller for windows' I choose the xbox 360 prehiperals one.Now no matter what I do to reinstall the driver correctly I don't have the option to choose Microsoft common controller for windows anymore.Does anyone know what I can do to get this option back again so I can correctly install the driver??By the way the receiver works and I know that it does work on windows 10 the same way it works on windows 7.

A:Microsoft common controller for windows has disappeared

Doesn't sound like they are Win 10 drivers...

http://www.computerhope.com/forum/index.php/topic,153383.0.html
Relevancy 55.9%

Hi all. I have just got windows 10 and after installating it I installed common programs that I use. I went through them a bit fast though and am now have problems with my xbox 360 controller.

I have a wireless receiver that I got on ebay and it's not the official one. While installing the drivers for the receiver rather than clicking 'choose my own driver' and choosing 'Microsoft common controller for windows' I choose the xbox 360 prehiperals one.

Now no matter what I do to reinstall the driver correctly I don't have the option to choose Microsoft common controller for windows anymore.

Does anyone know what I can do to get this option back again so I can correctly install the driver??

By the way the receiver works and I know that it does work on windows 10 the same way it works on windows 7.

http://www.tenforums.com/drivers-hardware/34618-microsoft-common-controller-windows-has-disappeared.html
Relevancy 54.18%

there is a problem in device manager showing yellow marks due to reinstall the ethernet controller driver for laptop hp pavilion dv9000 . this problem arised when i reinstall windows vista .. so what should i do bcoz internet is not connecting em using dsl connection of home cable.. so what should i do....???????????

A:ethernet controller driver of hp pavilion dv9000 for microsoft windows vista has not

and welcome to the Forum

Use another pc and go to the hp support site . . download the driver to a flash drive and install in on the crippled pc

http://www.techsupportforum.com/forums/f217/ethernet-controller-driver-of-hp-pavilion-dv9000-for-microsoft-windows-vista-has-not-625475.html
Relevancy 48.59%

Greetings. Ive got a problem with my Razer mouse and keyboard. Ive just downloaded Windows 7 compatible driver but it doesnt work for me at all. If i tryed to change dpi on my mouse it wrote me that no usb mouse found. It seems that driver for USB doesnt support this configurators. It seems that system work with keyboard and mouse but cant recognize them for external drivers. Anyone knows what can i do with that? It annoning, i cant use macros on my lycosa and i cant even change dpi and freq on my mouse. Thx for any reply.

A:Razer Lycosa and Lachesis + Windows 7

Hi Krezz,

i think i have the same problem like you do...but for macro part i haven't try it on.

one thing for sure, every time i start up my windows 7, the OS can detect my keyboard Lycosa but can't detect my Lachesis...but after i unplug the USB (i usually connect my Lachesis tru the USB port in Lycosa) and re-plug it again, then then windows can detect it. Strange rite?

So currently, every time i open my comp, i need to unplug and replug my lachesis.

Does anyone can help both of us? thx

http://www.sevenforums.com/drivers/25755-razer-lycosa-lachesis-windows-7-a.html
Relevancy 48.59%

Hi everyone I have recently encountered blue screens while playing World of Warcraft for an hour or so I believe it is a compatibility issue with my Razer drivers for my Lycosa keyboard and Naga mouse I have also requested help Razer 7 Drivers Windows BSOD and from Razer but from reading the forum I believe you guys might be able to help me out I am not too knowledgable on the driver verifier software but I had been using it with default settings and sellecting all drivers This had resulted in blue screens right after the Windows load screen only after the Lycosa or Naga drivers had been installed It did not occur after any other driver isntallation I have also used the verifier settings suggested here and this results Razer Drivers and Windows 7 BSOD in a blue screen after log in after installing the Lycosa driver minidump attached but the Naga driver apparantly only causes verifier to blue screen with standard settings and all drivers selected minidump attached Is the dump for the Naga Razer Drivers and Windows 7 BSOD using these settings even useful What does it mean I believe I have all the latest drivers installed as well as having Windows fully updated Any help would be much appreciated My main computer specs are as Razer Drivers and Windows 7 BSOD follows Motherboard - Asus P P D-E Pro CPU - Intel i RAM - Kingston T DDR - C Graphics - Gigabyte GTX GB Sound - Asus Xonar Essence STX

A:Razer Drivers and Windows 7 BSOD

Hi -

Please --> http://www.techsupportforum.com/f217...ns-452654.html

Regards. . .

jcgriff2

`

http://www.techsupportforum.com/forums/f299/razer-drivers-and-windows-7-bsod-517175.html
Relevancy 48.59%

I have a problem with my Razer DeathAdder since I started using Windows 7 on my computer.
Last time, when I used Windows XP I hadn't had this kind of problem...
alright, so when I specify macro assignment on Button 4 and 5 of my Razer DeathAdder (the 2 buttons that u press with your thumb), my razer starts not working in Warcraft III game.
It works if I use notepad, but not in warcraft game...

I am using Firmware ver 1.27 and Driver ver 1.09...
I am logged in as administrator in my windows.
If anyone had experienced this problem, and it was solved.. pls help me -.-
Thanks in advance...

A:Razer DeathAdder Problem on Windows 7

Warcraft may not support those buttons. I have ran into this issue with my Lachesis.

~Lordbob

http://www.sevenforums.com/drivers/36673-razer-deathadder-problem-windows-7-a.html
Relevancy 48.16%

I dont know whether does windows 7 affect this, so here's the problem. After installing the latest windows 7 compatible driver for my diamondback and assigning the respective hotkeys (numpad 7 and 8) to the sidebuttons, yet it doesnt seem to work in Warcraft 3 whenever i play dota with it. But it works when i click it on notepad, so can any kind soul solve my issue?

Thanks in advance
 

https://forums.techguy.org/threads/razer-diamondback-3g-warcraft-3-windows-7-problem.967191/
Relevancy 48.16%

hello forum please help, im having driver and windows update issues...i have a razer deathstalker ultimate keyboard, it gave me problems in the past but nothing i couldn't fix,but now for some reason the driver from the windows update for the deathstalker titled (razer inc other hardware software update released in November, 2013 driver) keeps failing to install followed by a error code 800F0203....ive downloaded the latest update from the razer website installed it everything went fine except for the razer update found in the windows update section....it used to work before, never gave me an error automatically downloading and installing it..can someone please help me, its just this one driver that needs to be installed from the windows update and the keyboard will work again....

A:razer inc deathstalker update from windows keeps failing..please help

In device manager you can right click it and roll the driver back to previous. Try that.

http://www.bleepingcomputer.com/forums/t/601889/razer-inc-deathstalker-update-from-windows-keeps-failingplease-help/
Relevancy 48.16%

hello forum please help, im having driver and windows update issues...
i have a razer deathstalker ultimate keyboard, it gave me problems in the past but nothing i couldn't fix,
but now for some reason the driver from the windows update for the deathstalker titled
(razer inc other hardware software update released in November, 2013 driver) keeps failing to install followed by a error code 800F0203....ive downloaded the latest update from the razer website installed it everything went fine except for the razer update found in the windows update section....it used to work before, never gave me an error installing it..can someone please help me, its just this one driver that needs to be installed from the windows update and the keyboard will work again....

http://www.sevenforums.com/drivers/389249-razer-inc-deathstalker-update-windows-keeps-failing-please-help.html
Relevancy 48.16%

I have Windows 7 x64. I've been trying to connect my Raze Megalodon to my PC but it doesn't recognize it. I've found out that it is missing USBAUDIO.sys.
I found out by connecting the headset to my laptop and looking at the drivers in Driver Manager.

What should i do from here? I still have no clue how to make my headset to be recognized by my PC.

Thanks in advance.

A:Razer Megalodon drivers missing in Windows 7 SP1.

hi you have a thread started here do not make multiple threads. this one is closed. Razer Megalodon drivers missing.

http://www.techsupportforum.com/forums/f217/razer-megalodon-drivers-missing-in-windows-7-sp1-698262.html
Relevancy 48.16%

Hi everyone I just made a stupid move and decided to install razer red 64 bit on my os which ****ed up my pc and now it couldn't start it just keeps flashing when I turn it on it wouldn't even show f12 or f2..and that's what makes it difficult for me to fix the problem

A:windows 8 cannot start after uninstalling razer red skinpa

Try the Delete key.

http://www.eightforums.com/software-apps/28868-windows-8-cannot-start-after-uninstalling-razer-red-skinpa.html
Relevancy 47.73%

Well! I finally got around to installing my VMWare Tools. On the reboot MS decided that my version 10074 no longer applied and automatically updated me to 10130. As if I had a say in this.... Thank God I'm in VM. I would be Pissed! I'm posting this from my Win 10 VM. You Have No Say At All.... Thank you You For Your Cooperation... Your Support Team At Microsoft.. We Have Control, You Have NON.... I'm rethinking Windows.. Apple, No!!! Linux Would be the most prudent course to take. At least you have control.

Am I The Only One Pissed About This??

 

Relevancy 47.3%

Hey guys!

My friends owns a Razer Megaladon headset, that he daily uses to talk to me via skype.
Every time he becomes silent, or whispers, breathes in the mic etc. it makes the auto adjust go mad.
I am quite certain that it isn't skype, because I know that the Windows 8 version of Skype doesn't have any settings that include auto adjust.

We have tried to fix it by fiddeling around with the control panel settings, but nothing, which has been suggested in other threads. Has worked.

I think it has something to do with the headset, or at least the mic. Probably the drivers or something similar.
It is auto-adjusting the sound to 100% each time.

How do we fix the mic/headset/pc from auto-adjusting the volume?
Any help greatly appreciated.
Thanks!

http://www.eightforums.com/drivers-hardware/16538-razer-megaladon-headset-auto-adjusts-windows-8-a.html
Relevancy 47.3%

on the hardware page on my system the controller is there but has a yellow sign next to it when i try to update the driver with the 2009 driver i get this problem
the installation of this device is forbidden by system policy
i am the admin on the pc made a seprate account for admin i still get the same issue when trying o update the driver so i can use this.

ANy Help please

A:Microsoft Gaming Controller

Have you tried uninstalling it then re-installing the updated driver. or uninstall it then reeboot and the driver should reinstall itself, and hopefully the yellow triangle will dissappear.

http://www.sevenforums.com/drivers/187716-microsoft-gaming-controller.html
Relevancy 46.87%

I installed windows 7 on Sony VGC LT15E. I installed Nvidia driver. its good working but Im looking for driver for and mass storage controller and media controller
Where do I find it Thanks for advance!

A:Mass Storage controller and Media Controller Windows-7

Hi.

You can find numerous drivers at your models support page. - eSupport - VGC-LT15E But THIS is the file you are looking for. Run them in Compatibility Mode and they should work.

http://www.sevenforums.com/drivers/74706-mass-storage-controller-media-controller-windows-7-a.html
Relevancy 46.87%

Hi on my old z x-ud h when formatted Microsoft controller? Storage space in windows and installed the drivers for mother board it installed a marvel x driver I think it was in the device manager The Microsoft Storage space controller? symbol is like a diamond shape silver G in device manager In windows it automatically finds it but its called Microsoft Storage space controller In windows I cant find these drivers for my newer Asus H M-k motherboard like I could for the z x-ud h So if I wanted to format back into windows at some point what drivers is the Microsoft Storage space controller for windows for the asus h m-k as these driver are not on the mother board disc or website Also can you use any intel inf file download as also this is not on the asus web site or disc There is a Intel Management engine components but no separate Inf file Another thing is on https www asus com support Downloa Qm y qHcHK I don't under stand the driver release as it looks like the date doesn't match the driver versions Which is the newer driver version Take this chip set driver Version release date update Version release date

http://www.sevenforums.com/hardware-devices/382014-microsoft-storage-space-controller.html
Relevancy 46.01%

Hi, I'm running windows 7 home premium and have just bought the microsoft xbox 360 wireless controller for windows and I cant get it to work at all!! I have installed the disc that came with it and the devices can be seen in control panel, I hold down the wireless controller button until it flashes and then hold the wireless button on the controller, they seem to pair up ok but the controller is completely unresponsive, I'm trying to play call of duty - world at war, what do I have to do to get this controller working?
 

A:Cant get my Microsoft xbox 360 wireless controller to work

if you press the center XBox button does a little menu pop up on screen? Mine pops up a bar that shows the battery life.
Some games you need to go into the options and chose the controller instead of the mouse and keyboard.

You can also try microsux's site for any updated drivers, as the disc may be pretty old. http://www.microsoft.com/hardware/en-us/p/xbox-360-wireless-controller-for-windows#support
I think that is the right site..

Oh, I just found this, http://www.gamefaqs.com/boards/944197-call-of-duty-world-at-war/47960938 seems that specific game is mislabeled and does not support the use of a controller.
So you'll need to try another game to test the controller.
 

https://forums.techguy.org/threads/cant-get-my-microsoft-xbox-360-wireless-controller-to-work.1095914/
Relevancy 46.01%

Hi All,
I have a Microsoft usb wireless, xbox360 controller I use on Win7. I have tried to install on Win8, but get a cannot install error.

Has anybody got any advise on using such a device with win8.

Thanks for your help in advance.

Gavatar

A:Xbox360 Wireless controller. USB Microsoft adapter.

Had the same issue with my 360 controller got it working with drivers found online. My PS3 controller worker no problem though oddly enough.

http://www.eightforums.com/drivers-hardware/4956-xbox360-wireless-controller-usb-microsoft-adapter.html
Relevancy 46.01%

Please help:
I can't get this computer to run the files for the drivers(Zipped files). I have 7-Zip to open them.
Thanks for any help.

A:yellow ! on Video controller and. ? on multimedia Audio controller, RAID controller, and an unknown device

Just to add, I tried updating the drivers but windows won't run the downloads.

http://www.bleepingcomputer.com/forums/t/480199/yellow-on-video-controller-and-on-multimedia-audio-controller-raid-controller-and-an-unknown-device/
Relevancy 45.58%

Hello I have a bit installation for Driver failed? Controller Microsoft Wired of a problem I have this controller as seen here Xbox Controller for Windows Microsoft Hardware Okay I'm trying to hook this thing up to my new Dell Inspiron R The thing is when I plug it in it keeps failing the driver installation Ok now here is other part I have used this controller Driver installation for Microsoft Wired Controller failed? perfectly fine on my previous HP Mini As you know that's a pretty weak computer compared to the one I just bought Now after about hours of researching I've downloaded the current drivers from M and that didn't help at all Next I came across someone who said check the device manager Okay so I did a cross examination with both computers and found the netbook had something called quot universal serial bus usb controller quot drivers with several others branching off while my Dell did not Also the fact that the Mini uses USB while the Dell is So I've come to the conclusion that my Dell is lacking and it is these quot Controller quot drivers Now the annoying part is when I use the device manager to search for updates it says it can't find anything I've googled around and used the driver disk that came with my Dell to no avail I would greatly appreciate it if anyone could help with my problem I'm just using the controller for gaming It works fine in the netbook so I don't think power to the controller is an issue My M drivers are up to date so I don't think it's those either If it helps my computer says the controller is made by MadeCatz I brought it from GameStop though My Dell specs are rd Generation Intel Core i - M processor M Cache up to GHz Windows Home Premium Bit English quot High Definition p LED Display with Truelife GB Dual Channel DDR SDRAM at MHz GB RPM SATA Hard Drive X Tray Load CD DVD Burner Dual Layer DVD -R Drive Intel HD Graphics

A:Driver installation for Microsoft Wired Controller failed?

Ok, so after a little messing around, I got the USB drivers. Still no luck with the controller itself though.

http://www.sevenforums.com/drivers/252205-driver-installation-microsoft-wired-controller-failed.html
Relevancy 45.58%

So, I have a brand new HP Pavilion 15 Notebook PC. The other day, all the USB ports stopped working. Looks like I have a couple unknown divices missing drivers. This is what I get.. AMD USB 3.0 Extensible Host Controller 0100 (Microsoft) Code 28.  I cant find this driver anywhere, even on the AMD website. I've also updated my BIOS and chipset and just about everything else I can think of and the USB ports still dont work. They get power, I can charge a phone through them, but the laptop doesnt see what is connected.  Anyone know where to find this driver? Thanks

A:AMD USB 3.0 Extensible Host Controller 0100 (Microsoft) Code...

Hi @KFM1 , Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue on your HP Pavilion 15 Notebook and the USB not working correctly. Please note remove any and all USB devices. Disconnect all non-essential devices. I would go to the device manager and uninstall any USB devices. Restart the notebook. Here is a driver for your Notebook and Windows 8.1. I would be happy to assist if needed. How Do I Find My Model Number or Product Number?Please let me know. Thanks.

http://h30434.www3.hp.com/t5/Notebook-Software-and-How-To-Questions/AMD-USB-3-0-Extensible-Host-Controller-0100-Microsoft-Code/td-p/4680024
Relevancy 45.58%

Are there any Windows 7 drivers for the controller? I have tried installing the Vista drivers in compatibility mode. No good!

Thanks!

A:Microsoft Sidewinder Dual Strike Gaming Controller

You could try forcing the install by going into device manager click on update driver software>browse my computer>let me pick>have disk> browse navigate to where you downloaded the file>click(or double click) the .inf file>hit ok> then next and see if it will install. Fabe

http://www.sevenforums.com/drivers/51462-microsoft-sidewinder-dual-strike-gaming-controller.html
Relevancy 45.58%

I am running Windows 7 Home Premium 32bit, and I have a problem where I cannot connect my XBox 360 controller to the wireless receiver I own. I have looked online to find a solution for my situation, but none that I have found have worked. I have even tried the solution involving going into the device manager and updating the device drivers. I would like help ASAP.

A:Microsoft XBox 360 Wireless Receiver Not Syncing With Controller

did it use to to work or is it a new receiver and does it light up solid green when plugged in?

http://www.sevenforums.com/hardware-devices/315656-microsoft-xbox-360-wireless-receiver-not-syncing-controller.html
Relevancy 45.58%

Does anybody know how to get razer synapse to work with razer naga right-handed mouse and razer naga left-handed mouse at the same time? Razer synapse will not support this. Does anybody know how to run two instances of razer synapse from one computer. One instance of razer synapse for the razer naga right-handed mouse and one instance of razer synapse for the razer naga left-handed mouse? That is the only way I can think of getting both mice to work simultaneously on one computer.
 

https://hardforum.com/threads/use-razer-naga-right-razer-naga-left.1897302/
Relevancy 45.15%

Heres the situation I installed a fresh copy of WIN on my IBM Thinkpad A m ACPI on Device Unknown Embedded Compliant Microsoft Controller?!?! but I am having a problem setting up a device in Device Mangager I have no idea what is going on When i reboot the laptop it prompts me that it has found a new piece Unknown Device on Microsoft ACPI Compliant Embedded Controller?!?! of hardware and it wants me to install the driver for it The problem is that I have no idea what device it is since all the devices that should be working are working - so i don t know what to do The clues that I have noticed that might help - the laptop Unknown Device on Microsoft ACPI Compliant Embedded Controller?!?! takes a LOOOONG time to boot up or mins and is sort of sluggish in operation compared to how it ran when i bought it - my internet connection is super slow I have a DSL router that serves computers incl mine the other two have XP and everythign runs smooth - the unknown device says it is located Unknown Device on Microsoft ACPI Compliant Embedded Controller?!?! on the the quot Microsoft ACPI-Compliant Embedded Controller quot Would any one know what Device this quot Unknown Device quot is I just need to know so i can install the driver so my system can run properly thanks Zach nbsp

A:Unknown Device on Microsoft ACPI Compliant Embedded Controller?!?!

https://forums.techguy.org/threads/unknown-device-on-microsoft-acpi-compliant-embedded-controller.84473/
Relevancy 45.15%

Hello,
I have these drivers for my HP Media Center m370.uk PC missing. I have searched via HP's website but found nothing about reinstalling them.

I have attempted to install them using the Install Wizard but also no luck.

(These are under Other Devices in Device Manager)

How can I get these drivers? (I also reformatted my PC to Windows XP it was Windows Media Center before)

Thanks in advance.
 

A:Multimedia Video Controller And Microsoft IR Transceiver Drivers Missing

https://forums.techguy.org/threads/multimedia-video-controller-and-microsoft-ir-transceiver-drivers-missing.737002/
Relevancy 45.15%

Hi all,

i have updated my system to ultimate x64 sp1.

now in device manager, i found one unknown device(which is shown in Other Devices in Device manager), i tried most of drivers for it.

but not able to get it. i even do not know what device it is.

Please refer attached images.



thanks,
krunal

A:Unknown Device on Microsoft ACPI Compliant Embedded Controller?!?!

DId you *upgrade* from 32bit to 64bit?

http://www.vistax64.com/drivers/167584-unknown-device-microsoft-acpi-compliant-embedded-controller.html
Relevancy 45.15%

And gives an extremely vague error message:

Obtained from here: http://www.microsoft.com/downloads/...12-576b-42f2-b7c1-2a17ce25188b&displayLang=en

I'm running Windows XP Pro SP2, 32-bit, on a MacBook Pro using Boot Camp. I've redownloaded and tried several times, but the same thing always happens. It only takes about a second.

Clearly, such a vague error message is troubling? Any help would be vastly appreciated...(Is this in the right forum?)
 

A:Xinput Driver for Microsoft Common Controller (32 Bit) Fails to Install

Yeah, I figured as much. *sigh*
 

https://forums.techguy.org/threads/xinput-driver-for-microsoft-common-controller-32-bit-fails-to-install.754282/
Relevancy 39.99%

Log Name nbsp nbsp nbsp Microsoft-Windows-Kernel-PnP Configuration Source nbsp nbsp nbsp nbsp Microsoft-Windows-Kernel-PnP Date nbsp nbsp nbsp nbsp nbsp AM Event ID nbsp nbsp nbsp Task Category None Level nbsp nbsp nbsp nbsp Error Keywords nbsp nbsp nbsp User nbsp nbsp Date: Keywords: Level: User: AM 6:00:17 Category: 1/16/2016 SYSTEM Name: None Error Computer: Microsoft-Windows-Kernel-PnP ID: Log Source: Microsoft-Windows-Kernel-PnP/Configuration Event Task 411 DESK nbsp nbsp Log Name: Microsoft-Windows-Kernel-PnP/Configuration Source: Microsoft-Windows-Kernel-PnP Date: 1/16/2016 6:00:17 AM Event ID: 411 Task Category: None Level: Error Keywords: User: SYSTEM Computer: DESK nbsp SYSTEM Computer nbsp nbsp nbsp DESKTOP- C QOQ Description Device IDE CdRomHL-DT-ST DVDRAM GH NSB LN amp c a amp amp had a problem starting Driver Name cdrom inf Class Guid d e -e - ce-bfc - be Service cdrom Lower Filters nbsp Upper Filters nbsp Problem x Problem Status xC Event Xml lt Event xmlns quot http schemas microsoft com win events event quot gt nbsp lt System gt nbsp nbsp Log Name: Microsoft-Windows-Kernel-PnP/Configuration Source: Microsoft-Windows-Kernel-PnP Date: 1/16/2016 6:00:17 AM Event ID: 411 Task Category: None Level: Error Keywords: User: SYSTEM Computer: DESK lt Provider Name quot Microsoft-Windows-Kernel-PnP quot Guid quot C A - - D-ABD -E C quot gt nbsp nbsp lt EventID gt lt EventID gt nbsp nbsp lt Version gt lt Version gt nbsp nbsp lt Level gt lt Level gt nbsp nbsp lt Task gt lt Task gt nbsp nbsp lt Opcode gt lt Opcode gt nbsp nbsp lt Keywords gt x lt Keywords gt nbsp nbsp lt TimeCreated SystemTime quot - - T Z quot gt nbsp nbsp lt EventRecordID gt lt EventRecordID gt nbsp nbsp lt Correlation gt nbsp nbsp lt Execution ProcessID quot quot ThreadID quot quot gt nbsp nbsp lt Channel gt Microsoft-Windows-Kernel-PnP Configuration lt Channel gt nbsp nbsp lt Computer gt DESKTOP- C QOQ lt Computer gt nbsp nbsp lt Security UserID quot S- - - quot gt nbsp lt System gt nbsp lt EventData gt nbsp nbsp lt Data Name quot DeviceInstanceId quot gt IDE CdRomHL-DT-ST DVDRAM GH NSB LN amp amp c a amp amp amp amp lt Data gt nbsp nbsp lt Data Name quot DriverName quot gt cdrom inf lt Data gt nbsp nbsp lt Data Name quot ClassGuid quot gt D E -E - CE-BFC - BE lt Data gt nbsp nbsp lt Data Name quot ServiceName quot gt cdrom lt Data gt nbsp nbsp lt Data Name quot LowerFilters quot gt nbsp nbsp lt Data gt nbsp nbsp lt Data Name quot UpperFilters quot gt nbsp nbsp lt Data gt nbsp nbsp lt Data Name quot Problem quot gt x lt Data gt nbsp nbsp lt Data Name quot Status quot gt xc lt Data gt nbsp lt EventData gt lt Event gt

https://social.technet.microsoft.com/Forums/en-US/ac564a06-5cb4-4869-b92b-df7d5087297e/log-name-microsoftwindowskernelpnpconfiguration-source?forum=TechNetEvents
Relevancy 39.56%

Ok so I this is what I have:
-razer mamba tournament edition chroma
-razer deathadder chroma
-roccat taito control/midsize mousepad
-gaming computer
-csgo
-2 monitors

ok so whenever I am on my computer, my mouse stops working. I will be looking one way and shoot and then I can aim around or anything, my mouse stops working... I have to move my mouse around for like 4 seconds and then it my aim pops back into working. It is very frustraiting and everything and I don't know how to fix it. My dpi is set to 400, and my polling rate is 500 (it was worse when it was at 1000). My ingame sense if it matters is 1.8. I don't know how to fix it and haven't found anything on the internet about it so I am turning to you guys again.

Cheers

Luke

http://www.pchelpforum.com/pc-hardware/129142-razer-trouble.html
Relevancy 39.56%

A few days ago I stumbled upon a Razer start orb, but I didn't save it and now I have formatted my computer.

I know how to change it, but does anyone know where to find it? I found it in a this sorta thread (Start menu orb thread) but it wasn't "Continued". Where can I find it?
Change Windows 7 Start Orb with Windows 7 Start Button Changer | The Windows Club

Relevancy 39.56%

Hello I Razer Naga bought a Razer Naga a week ago and I seem to be having problems with it a lot during that week The problems I am getting are blue screen errors and I have not been getting these since I bought the new mouse First was when I was playing WoW and suddenly when I clicked the left mouse button it minimized the game and I realized I couldn't press anything with my left button except the task bar then a few seconds later I got a blue screen of death Then a few days later I was just browsing through the my pc going through my files then again my left mouse button wasn't working got a Blue screen of death again Just now I was playing WoW and my game just froze I think it was when I clicked the bottom left button where the back and forward button It's what I use to get on my mounts in game Please don't just say it's because of the macro keys because like I mentioned above it did it just on my desktop Plus I do have the latest drivers software so could you please help with my problem I do have Windows

A:Razer Naga

You'll want to fill in your system specs via the User CP that way people can help you.

Also, you'll want to read this thread > http://www.sevenforums.com/crash-loc...d-problem.html

http://www.sevenforums.com/hardware-devices/76563-razer-naga.html
Relevancy 39.56%

Hi.

I have a Razer Lycosa (Mirror Edition) gaming keyboard. It works fine, but sometimes, when I start my computer, the backlightning of the keyboard has changed from 'on' to 'wasd'. (I always use the 'on' setting.)
I figured maybe updating the drivers and firmware would solve this problem.
I updated the drivers to the latest drivers found on Razer's website.

Now to my problem:
I can't find a firmware update anywhere on Razer's website.
I searched using google and found forum posts relating to firmware updates, so it seems that there is/was firmware files available. I just can't seem to find them.

Help, please.

A:Razer Lycosa

I dont have much useful to say, but, as far as I'm concerned, I have a Razer Lachesis, and I've been constantly sending Razer emails with my semi-serious problem.

Still no reply: Major jerks when it comes to problems like this.
They even refused to ship me a new one when they did reply, telling me the same crap, "Uninstall, unplug, install, unplug etc.."

Razer Support
'bout as far as it goes really.

You'll have to persevere like me probably.

http://www.sevenforums.com/drivers/72717-razer-lycosa.html
Relevancy 39.56%

I recently bought the Razer Kraken 7.1 sadly I can't seem to hear the Surround Sound.
Whenever I go to "Audio Deviceslayback" I see the "Headset Earphone (Razer Kraken 7.1)" and "Speakers (Razer Surround Audio Controller)"
When I enable the Headset Earphone I can hear any audio playing but when I enable Razer Surround Audio Controller I can't seem to hear anything even though the bars on the right are flashing green (when there is audio playing).
I suppose something went wrong when setting up the Razer Surround Pro because I couldn't choose from any audio source.
 

A:Razer Surround Pro

Take a look here -- http://www.razersupport.com/gaming-audio/razer-kraken-71/

If that doesn't help, contact them directly for help or replacement.
 

https://forums.techguy.org/threads/razer-surround-pro.1130089/
Relevancy 39.56%

Hi there
I am having some problems with my new keyboard
http://eu.razerzone.com/gaming-keyboards/razer-lycosa/

the touch panel is a bit hit and miss, I hear this is common on earlier builds of this product but this is well newer then the ones mentioned in the razer support forums

when it works, its fine but then it will just stop ( just the touch pad the rest in fine) I think its driver related as when I check in device manager there are 3 keyboards showing ....... so, right click properties to check 'em out and disable the 2 that dont refer to razer ... still the same
uninstall them .. not much better and on reboot all 3 are there again

any thoughts guys ??

cheers in advance

Rick
 

https://forums.techguy.org/threads/razer-lycosa.842980/
Relevancy 39.56%

Hello, I recently plugged my razer nostromo in and the backlighting won't come on. I have the latest driver (2.05) and the backlighting did work before this.

Thanks,
-Rick

A:Razer nostromo isn't lit

i have a similar issue! i cannot get nostromo to work! i installed the new drivers but i get the message No razer Nostromo is connected!

does the driver work on you?

http://www.eightforums.com/drivers-hardware/16001-razer-nostromo-isnt-lit.html
Relevancy 39.56%

Anyone own this combination? I plan on getting it but would like some input from anyone that owns one of each or both. My folks are tired of me shaking the house with my current speaker config. :chef:
 

http://www.techspot.com/community/topics/razer-barracuda-ac-1-and-hp-1.75256/
Relevancy 39.56%

My friend gave it to me Friday, I have what I assume is its base already plugged into a USB.
It looks like this



But I cannot figure out where to plug the hand held things in at? I've tried the base,but NO way.
No instructions/manual. Can someone help?
 

A:Anybody know of Razer Hydra?

Maybe this will help.

http://www.razersupport.com/gaming-controllers/razer-hydra/

http://dl.razerzone.com/master-guides/Hydra/HydraOMG-ENG.pdf
 

http://www.techspot.com/community/topics/anybody-know-of-razer-hydra.203126/
Relevancy 39.13%

Hi

is there any one can help me I can not re start my computer I keep getting this error on my screen.
Thanks

A:starting...microsoft(r) windows millennium (C) copyright microsoft corp 1981-1999 A:\

Quote:





Originally Posted by maskin26


Hi

is there any one can help me I can not re start my computer I keep getting this error on my screen.
Thanks




Hello maskin26,

Make sure that you don't have any media in the drives (cd,floppy,etc)

Was anything recently added before the problem?

Boot into the BIOS and make sure that the HDD is recognized by the system and check the boot order.

http://www.techsupportforum.com/forums/f10/starting-microsoft-r-windows-millennium-c-copyright-microsoft-corp-1981-1999-a-319361.html
Relevancy 39.13%

Hey everyone I like to play the occasional MMORPG so I went ahead and got myself Razer Replacing my Naga. a Razer Naga mouse Its super handy since it has extra buttons on the side for easy keybindings and such but i ran into a huge problem So I have had a Razer Naga for about months now and I have to admit that I really love it and that I am having a hard time using a quot normal quot mouse again Anyway After realizing that my mouse once in a while would do a quot double click quot when only pressed once I went and looked it up It seems that the double clicking problem is a common issue with the Razer Naga and it is a simple wear and tear problem I refuse to start opening the mouse breaking the warranty and fiddle with the parts myself because I expect an mouse to at least not wear down after months I m sending the mouse right back and will be getting a refund Can you guys recommend a mouse for me I don t mind paying a decent amount of money for a mouse since I use it on a daily basis But I need to get my money s worth Thanks in advance and enjoy your weekend nbsp

https://forums.techguy.org/threads/replacing-my-razer-naga.1049207/
Relevancy 39.13%

Hello When my Razer Naga Epic is hooked mouse Razer problem.. up via usb to my computer the computer will stay at the HP load screen on startup My Razer Anansi keyboard is also hooked up via usb and work fine with the computer I have Razer mouse problem.. the keyboard hooked up in the back of the pc on the bottom usb ports I have the mouse on one of the top usbs in the back I switched the slots and it still does it I downloaded and updated Synapse and still nothing I disconnect the mouse from the computer and the pc loads windows and all is well Once the pc is on and loaded I hook up the mouse and it works fine ONce i restart it freezes again at the HP load screen I even tried hooking up the mouse in the front usb ports but still not workig The mouse works fine on my other HP computer What could be the problem thx nbsp

https://forums.techguy.org/threads/razer-mouse-problem.1156054/
Relevancy 39.13%

Hello there, basically I'm in a rage-mood at the moment because every time I go to download the Razer Deathadder Drivers 1.09 from Razerzone (Official Razer Website), the download automatically cancels and I have absolutely no control over it.

I tried downloading in Opera, Chrome, Internet Explorer and I even downloaded an old Netscape to try it out.

I'm in dire need of the Firmware and Drivers but theres nothing I can do to download them..

Does anyone know why this is happening?
 

https://forums.techguy.org/threads/razer-deathadder-drivers.875220/
Relevancy 39.13%

for some reason my razer copperhead all of a sudden has become choppy and innacurate. i have messed with settings, installed newest firmware and drivers... im at a loss now, could my mouse be physically failing after only a year??
 

https://forums.techguy.org/threads/razer-mouse-getting-all-choppy.796145/
Relevancy 39.13%

Since using Win 8 CP I have noticed my keyboard often misses the letter "e" and double types other letters randomly. I am not sure if it is a win 8 problem or coincidence that this has happened since using Win 8.

A:Razer Blackwidow Keyboard

Razer is completely notorious with drivers. Make sure you are using their latest and if you are already, complain to them.

http://www.eightforums.com/drivers-hardware/5253-razer-blackwidow-keyboard.html
Relevancy 39.13%

Just as the title says

Hi guys I got a new mouse a couple of days back, it's one of those fancy Razer mouses with 12 buttons on the side that is used for gaming and stuff. I have an issue when I try to use usb 3.0 instead of 2.0 ports. ( my tower only has like 2 2.0 ports so I try to use those for other things ) I am trying not to buy a usb hub before somebody says it

On games ( fullscreen or Windowed ) quickslot controls where you can use the numbers on your mouse I can't use the 3.0 port as it won't recognize the side buttons but it will on the 2.0 port.

I am guessing this is a driver problem but I am unsure. Neither the native mouse driver for Windows nor the fancy Cloud Synapse driver 2.0 works. Is there another one I don't know about or is there a fix to this?

A:Razer Mouse - USB 3.0 port using 2.0

It could be that the 3.0 port is being provided by an add-on chip on the motherboard, rather than native to the motherboard itself, which could explain the compatibility issue.

While I understand that your ports are limited, plugging the mouse into a 3.0 port is a total waste of bandwidth and is not going to have any kind of advantage over using the 2.0 spec. Can't you just unplug one of your existing devices that is occupying the 2.0 port, and use the 3.0 for that to free up a 2.0 port for the mouse?

From my own past experience, using a 3.0 port for a mouse has occasionally caused abnormal mouse behavior.

You could also try looking in BIOS for an option to set your 3.0 port to "legacy" or the 2.0 spec. Some BIOS' will give you that option...

http://www.eightforums.com/drivers-hardware/53210-razer-mouse-usb-3-0-port-using-2-0-a.html
Relevancy 39.13%

My mouse cursor has started freezing on screen for a few seconds at a time. Then Windows will make the "ding dong" disconnection sound, and the mouse will start working again, though sometimes it takes a few ding dong sounds.

You would think maybe it's a faulty wire, but the lights in the mouse stay on the whole time. And I tried cleaning the lens with rubbing alcohol, but to no difference.

Also it seems to happen more often when the comp is doing something intensive.

A:Razer Diamondback keeps freezing

Try another mouse you know is good to see if the issue is still there. If it is, work through these steps.
USB Driver - General Fix for Problems

It could be a defective Diamondback too.

http://www.sevenforums.com/hardware-devices/330694-razer-diamondback-keeps-freezing.html
Relevancy 39.13%

I've just done a fresh install of Ultimate x64 and can't solve one problem with my audio. I am using a 6.1 surround sound system (Onkyo HT-R520) but putting 5.1/7.1 sound into it from Vista. The problem is that the sound from the front center channel goes straight to the rear center instead in both configurations.

When I was running the 32-bit version of Vista Ultimate, it never had these problems. I was always able to get 5.1 sound out of the proper speakers.

Any ideas on what's happening or how to fix it? The rear channel isn't needed, but I sure would like to have my front center back!

A:Razer Barracuda AC-1 issue.

Hi Sylver,

It would help to have more info about your computer sound chip/card

Or if it works for you, just swap the two center cables

Pooch

http://www.vistax64.com/sound-audio/196251-razer-barracuda-ac-1-issue.html
Relevancy 39.13%

Hello.

So I guess this is in the off-topic section and if I posted in the wrong section again, I'm sorry.

I have noticed that whenever I startup my computer, Razer Configurator kept poping out showing me my settings which usually isn't the case after it has loaded. But after the last update, it kept showing up. Is there a way to prevent this? I have tried re-installing but it didn't work.

Can someone give some advice on this?

Sorry and thanks.

A:Razer Configurator Kept Showing...

  
Quote: Originally Posted by 1337


Hello.

So I guess this is in the off-topic section and if I posted in the wrong section again, I'm sorry.

I have noticed that whenever I startup my computer, Razer Configurator kept poping out showing me my settings which usually isn't the case after it has loaded. But after the last update, it kept showing up. Is there a way to prevent this? I have tried re-installing but it didn't work.

Can someone give some advice on this?

Sorry and thanks.


Go to start, type in msconfig, and press enter. When msconfig opens, find the Razer program and untick the checkbox for it. Then, hit apply and then hit ok and click on restart now.

Startup Programs - Change

http://www.sevenforums.com/performance-maintenance/252398-razer-configurator-kept-showing.html
Relevancy 39.13%

My Deathadder is on strike I think Ok I ll try to explain this as clearly as possible I m computer literate but not work. Deathadder not Razer will computer Einstein For Christmas I received a brand Razer Deathadder will not work. new hard drive which I had immediately installed I upgraded from an old used gb to a brand new tb Previous to the upgrade my deathadder worked fine no problems no issues no glitches no bugs After I upgrade to my new hard drive everything but my death adder will work For some reason my mouse driver will not I have tried all the basic trouble shooting steps I uninstalled and reinstalled the driver updated the firmware updated my windows system Multiple restarts later nothing I ve even gone into BIOS and to make sure the USB legacy was enabled It was Nothing In another effort to trouble shoot I hooked my mouse up to my spouses computer and ran the driver It worked perfectly So the problem is not the mouse If anyone can help me with this I would appreciate it My system Window s Vista -bit New HDD ST DL - VT Seagate Baracuda My mouse Razer Deathadder Driver up to date Firmware up to date Can anyone help nbsp

Relevancy 39.13%

Okay I m not usually one to look to a forum for help but this has stumped me Bought a brand new set of Razer Megaladons Today perfect condition from CCLONLINE COM Picked it This. Tricky Megaladon, One Razer up Got it home unboxed undamaged in fine condition now the Razer Megaladon, Tricky One This. Razer Megaladon is USB Only so i plugged it in the back USB Port it detected it fine downloaded the necessary driver and life was good untill i noticed absolutely no sound was coming through at all Now i ll walk you through some steps i v done so far - Tested it straight away on a Laptop i have worked perfectly plug in and play - Searched for drivers via Razer Site amp Google only Firmware downloaded and installed that but still no luck with the sound - Went into the Sound Playback set the Megaladon to Default Device amp experimented with others still no luck attempted restarts inbetween - Ran a driver sweeper and updated EVERYTHING possible still no good - Ran a driver cleaner cleaned and uninstalled all audio drivers and started from scratch still no sound - Tried in all different USB Ports i have nothing - Tried an external powered USB Ports nothing - Reformatted my entire system Nothing What the actual My system specs are as follows Processor - Intel I k - Overclocked to Ghz RAM - GB Vengence DDR MHZ Graphics - GTX Ti Gainward Dual Fan Harddrive - TB Western Digital Green MB Cache P H -M Pro Motherboard Chip Powercool Gaming Powerpack W Omg if you can get this working i ll internet High-Five you Thanks for reading nbsp

Relevancy 39.13%

My Taipan mouse worked fine with my i system with Windows then without using the Synapse software once I turned off USB ErP in BIOS But when I built a Skylake system and installed Windows Pro it started showing some issues it repeatedly freezes for at least minutes on a cold boot like it used to on my i system until I turned off USB ErP and unfortunately my ASRock H Combo-g motherboard has no such options in the BIOS to fix that but now there's another issue is that the middle wheel click is finicky and doesn't work everytime- I thought the mouse was wearing out however it works of the time in Linux and BSD it's most noticeable when I play a game like PlanetSide middle click in the game reloads my gun I have to click it at least - times for it to work but occasionally it happened in Firefox when middle clicking to scroll down No I don't have the Synapse software installed Any alternatives to tweaks in Windows or the BIOS besides the lack of USB ErP feature It does have power on by mouse keyboard options which Razer issues Taipan I think both are turned off atm

http://www.tenforums.com/drivers-hardware/53528-razer-taipan-issues.html
Relevancy 39.13%

I bought and returned a defective set of Razer Barricuda Headphones today, got another and the replacement was even worse. Does anyone here have these headphones and how are they? Really? And has anyone else have problems with this model headphone or any other razer product? (is this thread in the right place?)
 

http://www.techspot.com/community/topics/razer-headphones-problem.121801/
Relevancy 39.13%

ok i have recently bought a razer copperhead to compliment my new pc though i seem to have a major issue which no one seems able to resolve Basically i use a Plantronics DSP as a Headset Mic for music gaming as i have no speakers They work Problem Razer Copperhead perfectly fine until i plug my razor copperhead in which instantly makes the microphone on my headset not Razer Copperhead Problem work and distorts the sound from the headset to an extent where i can hear sounds but surrounded by buzzing and distortion I instantly thought it might be the new mouse so plugged both the headset mouse into my old pc but there was no problems As my old mouse is completely broken i can now only use my pc with sound and no mouse or a mouse and no sound upsetting as you can guess Anyway i hope you can help i will post my specs below AMD Athlon ASUS A N-VM PCI-Express Mainboard MB RAM Nvidia Geforce Gs XXX edition Channel Surround Sound Audio motherboard Windows XP Sp Thanks and hope someone can help nbsp

A:Razer Copperhead Problem

after viewing a few other threads, in the device manager everything is running fine with no problems apparent and i also updated all my drivers, someone said it could be a power problem though i have 550w psu

Rich
 

https://forums.techguy.org/threads/razer-copperhead-problem.485239/
Relevancy 39.13%

I recently just bought a Razer Naga 2012 for my comp. Should I have gotten the death adder instead? I play bf3, mw3, skyrim, gta iv, cod4, minecraft, sniper elite v2, and more
Or do you think I went well with the Naga because of the extra buttons and possibilities?

A:Razer Naga thoughts

I seem to like the Naga so far.. But should I have gotten the death adder?

http://www.sevenforums.com/hardware-devices/253124-razer-naga-thoughts.html
Relevancy 39.13%

hi guys i got my first in Razer Balade Laptop i was playing dota 2 and than when im finished i exit my game and wanted to put my laptop on sleep mode i got BSOD here is the files
System Spec of my Razer blade laptop
Intel? Core™ i7 Processor Dual Core w/ Hyper-Threading – 64Bit CPU: 2.8GHz (Base) / 3.5GHz (Turbo)\
Intel? HM65 Express Chipset
8GB Dual Channel DDR3 at 1333MHz
ntegrated Intel? GMA HD – Mobile Mode NVIDIA? GeForce? GT 555M 2GB DDR5 VRAM Using NVIDIA Optimus™ Technology
anyone would help it would be great thanks a lot!!!

A:Got BSOD Razer Blade 1st Gen

any help would be great thanks a lot!

http://www.sevenforums.com/bsod-help-support/288420-got-bsod-razer-blade-1st-gen.html
Relevancy 39.13%

I have a problem with my Lenovo G50-80 and Razer Kraken Pro headset. The headset is having a combo plug as I understand it should be for Lenovo, when plugging in the headset I can hear the sound ok but voice via the microphone is very very blurry, would say not usable. Have tried to figure out from audio settings if something is wrong but no help so far. Even tried other pair of headset (ohter brand) and that has exactly the same symptom. Both headsets work fine though in my smart phone (Samsung). Anyone experienced similar challenge and what could be the solution?

https://forums.lenovo.com/t5/Lenovo-B-and-G-Series-Notebooks/Lenovo-G50-80-does-not-work-with-Razer/td-p/3483692
Relevancy 39.13%

AMD Athlon XP, 2166 MHz (13 x 167) 3000+
Microsoft Windows XP Home Edition

When I restart my computer, my cursor randomly jumps around. I have downloaded the latest drivers. I have contacted their support team and they have offered me no help at all, and after many many more attempted to contact them, they won't respond anymore. I keep submitting tickets but now my username doesn't work on their website.

Does anyone have this mouse or know of this problem? I've had it over 30 days or I would have taken it back and gotten my money back.
 

A:Razer Copperhead problems

try this...go to device manager and remove the mouse and drivers...reboot and let windows "find" the new hardware..then install the drivers...let us know how it goes
 

https://forums.techguy.org/threads/razer-copperhead-problems.479121/
Relevancy 39.13%

My Razer Kraken 7.1 Chroma headsets audio keeps cutting out and to get it to work again I have to disable it in the sound bit of the control panel and enable it again, anyone know any fixes?

http://www.pchelpforum.com/windows-7-a/127790-razer-kraken-7-1-chromas.html
Relevancy 39.13%

hey guys,
well previously my friend decided to giv me a really crap death adder and i mean busted up "scroll wheel up or down wont work as well the mouse buttons" the only thing that does work is the laser, anyways i took a look inside and it seems ive got a lot soldering (or however you spell it) to do and find a new scroll wheel and since i wont be able to replace it, is it worth just finiding an old mouse obviously one thats optical or whatever, and replace the chip thats inside of that mouse with the death adder.

im only interested in really the feel of the mouse as currently i am using a microsoft ime 3.0 so i wouldnt be fussed but do you guys reckon it's possible?

sounds like a real abstract thing thou but holidays is coming and i got some spare time. cheers

A:Razer DA FULL CUSTOM

... In all reality, I have to ask why would you want to use a "really crap death adder"? When its "busted up". Are you referring to the insides or the whole mouse?

Chances of finding the exact scroll wheel used in the mouse as well as the clickers for the buttons for time and parts, it would be cheaper just to buy a new death adder, BTW they are not the best mice now days.

http://www.sevenforums.com/hardware-devices/118722-razer-da-full-custom.html
Relevancy 39.13%

Hello

I am having problems with my gaming mouse. (Razer viper) When I'm playing the games and I start to move mouse faster, the mouse don't move. When I'm moving my mouse slowly it is good when I start to move it faster it is not moving like I want.
Does anybody knows what it's wrong with my mouse?

Sorry for my bad english.
 

http://www.techspot.com/community/topics/problems-with-razer-viper.55421/
Relevancy 39.13%

Hi,

I recently purchased a Razer Kraken 7.1 USB Headset and I can hear static but only when audio is playing. If I am in game or watching a video, I will hear the static. I changed one program from Surround Sound to Stereo and the static stopped for that program, but then later the static returned. I searched around and it seems that a lot of people are having this problem, and it may be a USB issue. I also checked to see if the "listen to this device" option was enabled, it was not. If there is no solution for this, should I return this one and get a 3.5mm version, or get a USB to 3.5mm adapter?

Thanks

A:Razer Kraken 7.1 Static (USB)

USB headsets do not use the PC's audio system, they have built in electronics to convert the digital to audio. Sounds like it could be the headset, if the regular PC audio does not have this problem.

http://www.sevenforums.com/sound-audio/356353-razer-kraken-7-1-static-usb.html
Relevancy 39.13%

i got updates through windows update even though i turned off device installation settings



and i got this in windows updates wtf?!

wtf to do... i have razer synapse

A:razer update driver

Hello Cromax,

If you have at least Windows 10 build 14328 or later instead, then you could use a new option in the tutorial below to disable drivers in Windows Update.

Driver Updates in Windows Update - Enable or Disable in Windows 10

http://www.tenforums.com/windows-updates-activation/48899-razer-update-driver.html
Relevancy 39.13%

I'm happy to say my Razer Death Adder Mouse software (just loaded) works fine in Windows 7 RC1 build 7100 installed in XP SP3 compat mode (love this mouse )

A:Razer Death Adder

I'm really hoping it will work, I'm going to get mine on Saturday. Right now I just have a cheap Dynex wireless mouse that has been thrown at my wall and the middle mouse button is already worn out :/

http://www.sevenforums.com/drivers/15837-razer-death-adder.html
Relevancy 39.13%

Hello guys I have owned a Razer Naga for nearly two years now And I have had several problems with it in the past that I have managed to solve Or has solved it self I remember having this bug once or twice before but I have managed to solve it I cant remember how though I just remember having this exact problem a few times before I can move the mouse cursor left and right without problems But when I try to move the mouse up and down it stops and suddenly moves again Like if the edge of bug! movement Razer Naga up/down invisible program window is blocking the mouse from moving for a second It is really hard to move the mouse so everything takes a lot longer time I play games a lot thats why I bought the Naga so it's really annoying to not be able to play if there isn't any fix to this I read another thread Razer Naga up/down movement bug! about a guy who had the exact same issue who had to get a new one Because razer told him it was defective So have I managed to use a defective mouse for years managing to solve the problems each time Anyhow I need help And every answer is greatly appreciated

A:Razer Naga up/down movement bug!

Well, I resintalled all of my drivers. And uninstall Synapse.
I uninstalled the Naga from the device manager and repaired all of the drivers, and rebooted.
After repairing the drivers another time, it worked.

And I apparently have to repair my drivers on every start up to be able to move the mouse cursor.. ffs..

The cursor movement is still bugged, help would be apreciated..

http://www.sevenforums.com/hardware-devices/279179-razer-naga-up-down-movement-bug.html
Relevancy 39.13%

New drivers are available for the Razer Diamondback mouse supporting Vista 32 and 64 bit. Download from Razer Support

I have tested these drivers and they work a treat.

A:Razer Diamondback Drivers

n1 thanks just what i needed.

http://www.vistax64.com/drivers/53587-razer-diamondback-drivers.html
Relevancy 39.13%

I m here to tell you 2000 Razer Boomslang all about the worse mouse and service I ve ever experienced It s called Razer Boomslang and K rna Precision I bought my mouse months ago for about the best way to waste money is to do the same It took the mouse about moth to break down The left mouse button started lagging and soon it completely frooze on top of that it doesn t feel very precise infact I now use my http www sandberg it sandberg hardware jpg button no scroll mouse wich gives me the same result the no spot - bf ALWAYS Well that wouldn t bother me if it hasn t been that the company won t return my emails And I ve send since i got the mouse over months The lack of service is fustrating and the worse part is that the company haven t even released a WinXP driver The last driver was created nov How lousy is that The company can t even provide the customers with a propper driver for a common used operating system DON T BUY THE RAZER BOOMSLANG MOUSE - IT S NOT WORTH IT nbsp

A:Razer Boomslang 2000

Didnt they discontinue making the razor boomslang quite some time ago? I know they went out of business once and someone started it back up but didnt that venture go under too?
 

http://www.techspot.com/community/topics/razer-boomslang-2000.4167/
Relevancy 39.13%

I am having trouble upgrading my razer Lachesis mouse driver I have the latest driver (1.10) but I have the old firmware installed (1.64) and I downloaded the upgrade and try to install it but it keep failing I took off driver signature protection when i started up and try to install it again but no luck I am running win 7 home premium 64x

A:Razer Lachesis 1.91 driver

Hi Cilx. Welcome to SevenForums

Here is a link to the latest firmware for your mouse :Razer Lachesis Firmware Updater v1.94

Download that firmware and then right click on the file that you have saved. Click on "Troubleshoot compatibility"

Choose "Try recommended settings", and you will see that it chooses Win XP (SP2).

Click "Start the program" and the Razer Lachesis firmware updater will run. Run it and your firmware will update. Install your new drivers and all should be ok!

Hope this helps.
.

http://www.sevenforums.com/drivers/58279-razer-lachesis-1-91-driver.html
Relevancy 39.13%

I am currently using a Razer Lachesis for my computer, and in the past couple days I have encountered some problems. When ever one of my opponents use a rooting ability meaning that i get stuck to the ground or stunned or something along those lines my mouse clicking stops working. I can click all I want however it won't work. The only to temp. fix it that i have come across is to quickly Alt+tab out of the game and back in quickly...but once the opponent uses ability of the same type it happens again and again. I have tried re-installing the drivers, and so on but it doesn't work.
 

https://forums.techguy.org/threads/razer-lachesis-4000k-dpi-wow.1007500/
Relevancy 39.13%

My Razer Lachesis mouse is not working properly under 7 (jumping cursor).

The system cant find the mouse via firmware and also for firmware and mouseware it`s impossible to upgrade..

Anyone knows when razer is releasing new win seven drivers?

A:Razer Lachesis mouse

I'm using a Lachesis mouse, I didn't need to install any driver myself and I have no problems. You could try a different usb port but I'm afraid it wont help

http://www.sevenforums.com/drivers/8448-razer-lachesis-mouse.html
Relevancy 39.13%

Hey guys, I just recently bought a Razer Electra gaming headset which has a mic.

I am not able to set it up so I can Hear Noise / Talk through the mic at the same time.
I am using Realtek Audio HD player, I am not sure if its a problem with the Audio program or the headset it self. I have tried lots of different ways on trying to set it up through Realtek Audio HD player but have been having trouble for the past few hours.

Does anyone have any suggestions or some information which could help me out.

Thanks guys.

A:Razer Electra Headset

SenCe, welcome to the Seven Forums.

You can stop playing around with the Realtek controls as there is nothing you can do there to get it to work. Looking at the specs and manual for that headset, it looks like it only uses a single cable for both audio and mic,

and will only work on smartphones and the like that support that sort of thing, your onboard Realtek (and I doubt any sound card either for that matter) doesn't support audio and voice over a single connection.

Looks like either return them for a headset that uses two connections for audio and mic, or pick up a cheap desk mic if you like the sound/fit of the headphones.

http://www.sevenforums.com/sound-audio/219658-razer-electra-headset.html
Relevancy 39.13%

Hi i currently have they Problem With Razer Drivers. razer deathadder g and i am having trouble installing the drivers so currently when i GOTO devices and printers the mouse comes up as an optical mouse http imgur com DmCa LRcac and when i look in the device manager my mouse comes up under Human interface devices and mice and other pointing devices http imgur com DmCa LRcac i have attempeted various times to install the drivers from the razer site but the software does not detect my mouse what so ever Also as a side note i bought my mouse from ebay and the scroll wheel does Problem With Razer Drivers. not lite up have been having suspicions that its a fake mouse but im not sure Recomend me what i can do now thanks Tech Support Guy System Info Utility version OS Version Microsoft Windows Ultimate bit Processor Intel R Core TM i - K CPU GHz Intel Family Model Stepping Processor Count RAM Mb Graphics Card AMD Radeon HD Series Mb Hard Drives C Total - MB Free - MB Motherboard Gigabyte Technology Co Ltd Z XP-UD Antivirus Kaspersky Internet Security Updated and Enabled nbsp

A:Problem With Razer Drivers.

can you try it on another computer
 

https://forums.techguy.org/threads/problem-with-razer-drivers.1070283/
Relevancy 39.13%

Hello everyone I just picked up a Razer Blackshark green and black headset from my local Best Buy I get home and immediately plug it in The reason I bought a new one was because my old Astro A s started to produce a static sound in replacement of my voice over skype I just recently bought a Cyberpower Fang Cobra and upgraded to windows I wanted to know if the headset itself was broken so I plugged it Blackshark (Static?) Razer into my phone and called my brother everyone Razer Blackshark (Static?) was working fine The headset comes with a split end connecter for PC s I am assuming using my minutes of Google knowledge Razer Blackshark (Static?) that I have a problem with my Audio jack My PC has sets of audio jacks and I tried all of them Each pair produced the same static noise to my friends on skype I am lazy and most likely do not want to send it in for repairs Does anyone know if there is any cheap device I can use to plug the audio mic volume into a USB and skip my faulty jacks Or better yet would that solve my problem nbsp

https://forums.techguy.org/threads/razer-blackshark-static.1078406/
Relevancy 39.13%

Hello I bought a Razer Naga a week ago and I seem to be having problems with it a lot during that week The problems I am getting are blue screen errors and I have not GPU Naga or Razer BSOD? been getting these only since I bought the new mouse First was when I was playing WoW and suddenly when I clicked the left mouse button it minimized the game and I realized I Razer Naga or GPU BSOD? couldn't press anything with my left button except the task bar then a few seconds later I got a blue screen of death Then a few days later I was just browsing through the my pc going through my files then again my left mouse button wasn't working got a Blue screen of death again Just now I was playing WoW and my game just froze I think it was when I clicked the bottom left button where the back and forward button It's what I use to get on my mounts in game Please don't just say it's because of the macro keys because like I mentioned above it did it just on my desktop Plus I do have the latest drivers software so could you please help with my problem OK this is a recent update I posted this on a wrong forum so updating while I can I went to event viewer and I noticed the problem was with my graphics card driver so I've uninstalled used DriverSweeper to get rid of anything and re-installed just incase it could be a problem with just the GPU drivers But on the earlier BSOD's I am not sure if was because of my GPU drivers this is why I need anyones help with my problem here I will put BSOD memory dumps inside the zip please check both

A:Razer Naga or GPU BSOD?

  
Quote: Originally Posted by Metal Loops


Hello, I bought a Razer Naga a week ago and I seem to be having problems with it a lot during that week.
The problems I am getting are blue screen errors, and I have not been getting these only since I bought the new mouse. First was when I was playing WoW, and suddenly, when I clicked the left mouse button it minimized the game, and I realized I couldn't press anything with my left button except the task bar, then a few seconds later I got a blue screen of death. Then a few days later, I was just browsing through the my pc, going through my files, then again my left mouse button wasn't working, got a Blue screen of death again.
Just now I was playing WoW and my game just froze (I think it was when I clicked the bottom left button where, the back and forward button) It's what I use to get on my mounts in game, Please don't just say it's because of the macro keys, because like I mentioned above it did it just on my desktop. Plus I do have the latest drivers/software, so could you please help with my problem.

OK, this is a recent update (I posted this on a wrong forum, so updating while I can) I went to event viewer, and I noticed the problem was with my graphics card driver, so I've uninstalled, used DriverSweeper to get rid of anything, and re-installed just incase it could be a problem with just the GPU drivers.

But on the earlier BSOD's I am not sure if was because of my GPU drivers, this is why I need anyones help with my problem here.

I will put 2 BSOD memory dumps inside the zip, please check both.



These two had different causes, but both were related to your vidoe dirver. I would un-install the current driver completely and download a fresh copy

Let us know if you need help

Ken

Code:
040610-34226-01.dmp 4/6/2010 5:10:00 PM 0x00000116 0x874fe138 0x916f8a50 0x00000000 0x00000002 nvlddmkm.sys nvlddmkm.sys+eaa50 32-bit C:\Users\K\Desktop\New folder (4)\040610-34226-01.dmp 8 15 7600
040110-33087-01.dmp 4/1/2010 10:31:04 PM DRIVER_CORRUPTED_EXPOOL 0x000000c5 0x00000004 0x00000002 0x00000001 0x82b23067 ntkrnlpa.exe ntkrnlpa.exe+4685b 32-bit C:\Users\K\Desktop\New folder (4)\040110-33087-01.dmp 8 15 7600

http://www.sevenforums.com/bsod-help-support/76584-razer-naga-gpu-bsod.html
Relevancy 39.13%

So earlier today my PC was shut off via the power button (dunno if that helps) and when I turned it back on, I had no sound in my headset. I restarted and it still occured. None of the volume and sound options seems to have been changed and I dunno what happened! Please assist me if you can.

A:No sound in Razer Tiamat 2.2

Depending on what the reason for the power button shut down, almost anything can happen.

You say no sound in headset. Do you have sound in speakers?

Go to the Device Manager Sound section. Right click to highlight your sound device (e.g. RealTek or whatever you have) and then LEFT Click "Uninstall". DO NOT check the box to uninstall the drivers. Restart the PC and when Windows starts it will detect and reinstall the sound. This fixes a lot of Windows corruptions and may fix your problem.

BTW, more system info should be posted. Dell XPS doesn't tell us much as there are many XPS models. But, DO NOT include the Service Tag number, as that is personal data.

http://www.sevenforums.com/sound-audio/333875-no-sound-razer-tiamat-2-2-a.html
Relevancy 39.13%

I've got a Razer Nostromo on my main PC that I use for gaming but after the Windows install the Razer programming software won't recognize the pad It shows up correctly under devices but the programming software gives the error of quot No Razer Nostromo Connected Application will close now quot and then exits So far I've tried pretty much all the compatiblity options admin winxp win etc I've tried both the drivers that came with the pad and I've also tried the drivers that Windows pulls down from the repository I even went so far as to install several virtual machine packages Hyper-V Vmware amp VirtualBox windows xp only one I can force the pad over to the virtual machine with is Virtualbox and it works perfectly under that VM software detects it and will program it but once you switch OUT of VB it reverts to the default programming At one time I had the older version of this pad Belkin Nostromo programming? Razer N TE and it stored the settings in nvram on the pad I could move it over to my laptop and the programming moved with it But for whatever reason Razer decided to remove the nvram and make it completely dependent on their software for programming Anybody out there got one of these and were able to get the Razer software to recognize it on Windows Or anybody have any ideas on making it work

A:Razer Nostromo programming?

I tracked down a version of their software that will actually program the little beastie, v1.03 of the Nostromo software apparently will see the device under Windows 8 (funny that v2.02, the lastest won't). Exported profiles from the 2.0x versions aren't compatible with 1.0x, but I can live with that.

Link to the drivers if anybody needs them:

http://down3.driversdown.com/Input/Razer_Nostromo_Driver_v1.03.exe

http://www.eightforums.com/drivers-hardware/8475-razer-nostromo-programming.html
Relevancy 39.13%

Hello everyone I am joining other MVPs who have volunteered to answer Windows amp Office questions directly from the public in a live chat For the first time ever MVPs Chat About Experts MVP Windows and with Microsoft Office Microsoft Invite: from both Windows and Office have come together as a collaborative group for a special live chat MVPs will be on hand to take questions about Microsoft Office or Office products such as Word Excel PowerPoint Outlook Access Project and OneNote as well as Windows and earlier versions This event is a great opportunity to tap into the vast knowledge of these industry professionals who are regarded as the best in their field All levels of experience are welcome from beginners and students to intermediate power users Please join us for this informative Q amp A style chat and bring on your basic and your tough questions Chat About Microsoft Office and Windows with Microsoft MVP Experts October A M - A M Pacific Time Would you like to learn more about the cool new features in Office and Windows and what has changed since previous versions Do you use Microsoft Office but would like to learn tips and tricks to be more productive at home school or at work Perhaps you are a new user who has questions on how to get started with Windows or using the Office ribbon Or would like to learn how to protect your computer from malware and viruses Or perhaps you are just stuck and need answers The Microsoft Most Valuable Professionals MVPs are here to help The MVPs are the same people you see in the technical community as authors trainers user groups leaders and answerers in the Microsoft forums For the first time ever we have brought these experts together as a collective Invite: Chat About Microsoft Office and Windows with Microsoft MVP Experts group to answer your questions live MVPs will be on hand to take questions about Microsoft Invite: Chat About Microsoft Office and Windows with Microsoft MVP Experts Office or Office products such as Word Excel PowerPoint Outlook Access Project OneNote and more As well as the Windows and earlier versions such as Windows Vista In addition to Microsoft Office the chat will cover Windows related topics such as upgrading setup and installation securing your PC Internet Explorer personalizing your computer desktop or having fun with Windows Live Essentials to share photos make movies and more All levels of experience are welcome from beginners and students to intermediate power users Please join us for this informative Q amp A style chat and bring on your basic and your tough questions Join the Chat HERE October A M - A M Pacific Time Add to Calendar Join the event on Facebook Chat about Microsoft Office amp Windows with MVP Experts nbsp

https://forums.techguy.org/threads/invite-chat-about-microsoft-office-and-windows-with-microsoft-mvp-experts.956005/
Relevancy 38.7%

Hi,

I've recently bought a set of Razer Mako 2.1 Speakers and plugged in in via 3.5mm to my PC. The satellites are working fine but i'm getting very poor sound out of my subwoofer. I've set bass on both realtek HD audio manager and on the Mako control pod to maximum and when i ran the bass test on the link below the bass was still not very strong. Any solutions?

http://sinan.ussakli.net/basstest/TH...20Speakers.mp3

Any help you guys can give me will be much appreciated!

A:Razer Mako - Realtek & 2.1 Speakers

Do you get generally good bass if you plug in a headset? Or have you used other speakers that had good bass?

I looked at the manual for this and the only thing I see is the bass adjustment on the speaker systems control pad. It says to set the Equalizer in the media players for Off or Flat, in the troubleshooting section.

If you still do not have enough bass, and it is properly cabled and the bass unit sitting on the floor, it would appear it has a hardware problem.

http://www.sevenforums.com/sound-audio/199564-razer-mako-realtek-2-1-speakers.html
Relevancy 38.7%

Razer Diamondback 3G problem

Well Mous3(middle click) is acting weird.
1)When i press mouse3 It wont function
2)Mouse3 Will do its function after i press mouse3. then Mouse1 or 2 then mouse 3 doing its click

SO its somehow like stuck lol i mean i press mouse3 nothing happens then i press mouse1 or 2 and then Mouse3 works for that click and repeat all time like that lol its annoying

for example

Call of duty 4
Granade Throw- Mouse 3
Shoot- Mouse 1
Aim- mouse2

I want to throw nade but it wont come out then i press mouse1 or 2 and nade comes out and all time like that..

Anyidea what that problem might me? (Broken.Driver,Dirty) --__--?
 

A:Solved: Razer Diamondback 3G problem

UPDATE: Well i uninstalled driver and i have no problem like that now. Now il install driver again and il hope i wont have that problem
so il notify here
 

https://forums.techguy.org/threads/solved-razer-diamondback-3g-problem.892805/
Relevancy 38.7%

Hey guys !
So,I just got a new headset. It's the Razer Electra.I literally opened them 30mins ago ( ) ,but there is one issue - my mic doesn't work,at least I think it doesn't.
So,they came with 2 cables - one is for only for the sound ,and the other one is for the in-line mic and audio,but the mic seems to be off the whole time,even though my Sounds says that it's turned on.
Any help would be great.
Thanks in advance

A:Mic Doesn't Work On Razer Electra

Try the headset on a different PC if that doesn't work just send it back or return to the store you brought it from. Sometimes its not worth the hassle unless its a pain to send it back for you

http://www.sevenforums.com/sound-audio/306729-mic-doesnt-work-razer-electra.html
Relevancy 38.7%

Help me I have error 0xc0000135. I really need to fix it. I can't use synapse and a couple other apps. It is a possibility that While I was messing around in my programs file and then this happened. I know that this is bad. But how do i fix it. I tried re-downloading it and uninstalling it and repairing it, but it doesnt work!!!!! This has been happenening for atleast 2 months. It also happened after I downloaded windows 8.1

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 8, 64 bit
Processor: Intel(R) Core(TM) i7-3632QM CPU @ 2.20GHz, Intel64 Family 6 Model 58 Stepping 9
Processor Count: 8
RAM: 8088 Mb
Graphics Card: LogMeIn Mirror Driver, 7 Mb
Hard Drives: C: Total - 461510 MB, Free - 49932 MB;
Motherboard: Gigabyte, Blade
Antivirus: Trend Micro Client/Server Security Agent Antivirus, Updated and Enabled
 

A:Razer Synapse Error 0xc0000135

Maybe a restore will sort it http://windows.microsoft.com/en-gb/windows-8/restore-refresh-reset-pc
good luck
 

https://forums.techguy.org/threads/razer-synapse-error-0xc0000135.1118381/
Relevancy 38.7%

Hi guys i have a Razer Arctosa Keyboard but i lost the cd driver does anyone know where i can download the driver from internet and what kind of driver i need to download? Also i have a Razer Naga Mouse i have the driver called Razer Synapse that's only for the mouse right? not for the keyboard

A:Razer Arctosa Keyboard Driver

Directly from Razer,

Razer Arctosa Vista/XP Driver v1.00 (English)

http://www.sevenforums.com/drivers/284033-razer-arctosa-keyboard-driver.html
Relevancy 38.7%

Good day I have a problem that has recently sufaced with my Razer Anansi keyboard and I hope that some one here can shed light on it I recently built a rig for myself Tech Support Guy System Info Utility version OS Version Microsoft Windows Ultimate Service Pack bit Processor Intel R Core TM i - K CPU GHz Intel Family Model Stepping Processor Count RAM Mb Graphics Card x NVIDIA GeForce GTX - Mb SLI not Razer Anansi Solved: recognised. being Hard Drives C Total - MB Free - MB E Total Solved: Razer Anansi not being recognised. - MB Free - MB Motherboard ASRock P Extreme Gen Antivirus ESET NOD Antivirus Updated and Enabled I use an Razer Anansi Keyboard and a Razer Deathadder mouse The Keyboard works as a Solved: Razer Anansi not being recognised. standard keyboard and the soft keys also work in their default configuration however i am unable to load up the Anansi configuration software When i do so i get an error that quot No Razer Anansi connected Application will close now quot Windows is recognising my keyboard as an Anansi as seen here in this image of my devices However and i am not sure about this there looks like there may be a conflict with the Razer Deathadder as in Device Manager there are entries for both the Anansi nd Deathadder under mouse amp keyboard devices Things i have tried so far Emailing Razer support they were initially quick to respond however their attempts to fix this issue have been in vain Reinstalling Drivers both the Anansi driver both the latest version and the previous version and Synapse for the Death adder Removing Synapse driver for the Deathadder and replacing with legacy mouse Driver V Tried the Anansi on a second computer old Dell optiplex - Keyboard and driver worked fine Updated Mother board Bios- v to v to eradicate the motherboards intolerance to certain keyboards on POST Uninstalled the keyboard and mouse from device manager and reinstalled Just to recap the keyboard does work as a standard keyboard however it inst been seen by the configuration software which the ability to program the soft keys and macro ability is a big reason for me owning this particular keyboard Anyone have any suggestions Thank you for your time nbsp

A:Solved: Razer Anansi not being recognised.

I guess you are as stumped as me
 

https://forums.techguy.org/threads/solved-razer-anansi-not-being-recognised.1064685/
Relevancy 38.7%

Hi. Its my first time here. Ive had my system for 3 mos., no problems. playing a shooter game called a.v.a on IJJI.com. i installed the software for my new razer mouse, and after 5 mins of playing, bsod. i see threads for this problem for lots of different games, but the thing they seem to have in common is win7. my friends use the same software in same game without issue, but i am the only one using win 7. everyone else has xp or vista. i zipped my latest minidump to upload here, so i will try it now.

A:razer software crashes win7

First of all, make sure that you have the latest drivers and firmware installed. Also, make sure that you're using the correct version (Windows 7 x86/x64). Here's the razer downloads directory.

Razer Support

For future technical support questions, you may want to update/revise your system specifications via your User CP. In many cases, this is the only way supporters can get the required information to diagnose your problem. Make sure to use the exact model numbers of all your hardware, the more detailed the better.

http://www.sevenforums.com/bsod-help-support/76258-razer-software-crashes-win7.html
Relevancy 38.7%

Hello everyone issues with Deathadder Razer Funky First I would like to point out that I didn t really had a clue where to put this question but I figured since I m using my mouse to play games with mostly I thought Funky issues with Razer Deathadder I would put it here Since a few days my mouse is really acting strange It happens to be that I can t hold down the Left mouse button For instance I m quiet the counterstrike player and when I m holding down my left mouse button in order to spray it stops after a few shots Another example when I want to drag a file from one folder to another I keep dropping the file Or when scrolling on a website using the left mouse button it stops after a few Funky issues with Razer Deathadder secs It s really weird never had this problem before I m not sure it this has anything to do with it but I m having this problem more and more often since I installed a game on my pc a couple of days ago I m using a Razer Deathadder Thanks nbsp

A:Funky issues with Razer Deathadder

Can you tell us the computer and configuration on which you are working?
What is the brand and model of mouse ? What has happened when you have trieds using an alternate mouse?
 

http://www.techspot.com/community/topics/funky-issues-with-razer-deathadder.148561/
Relevancy 38.7%

I ve recently reinstalled my Windows x and i wanted to update my drivers and firmware for my lachesis I first installed the driver v restarted my PC and than i tried to update firmware using firmware updater for windows Razer stoped working! Lachesis After that firmware updater reported that flash was successful and that i should re plug my lachesis and restart my drivers I pressed enter after that to close message window Razer Lachesis stoped working! and that was it mouse was dead My USB ports don t even detect it Even snake logo is dead Mouse scroll LED is still working even when i shut down windows I understand that flashing firmware is a Razer Lachesis stoped working! sensitive matter but i don t understand where did i go wrong if i did anything wrong Lachesis Config is reporting correct driver v but firmware is still v it should be Did i complete firmware installation correctly Is there any way i could fix my mouse Thanks edit its Razer and in Device manager nothing shows There is no quot Mouse and other pointer devices quot tab edit found a guy on youtube with exact same problem as i Faulty razer or firmware bricked my mouse by the looks of it nbsp

https://forums.techguy.org/threads/razer-lachesis-stoped-working.1047195/
Relevancy 38.7%

If your a gamer that used the commands WASD on your keyboard to game. I recommend you use a Razer Nostromo Gaming Keypad. There are 16 programmable keys that are extremely easy to configure. It also has the ability to have 8 different custom sets of keys for 8 different games. It is form fitting to your hand and easy to use. I will Post the Link to the Razer Website here and also the link to the Razer Nostromo Keypad Driver here(Driver takes a few seconds to download depending on internet quality and speed)
Razer Website: http://www.razerzone.com
Razer Driver Website: http://www.razersupport.com/index.php?_m=downloads&_a=viewdownload&downloaditemid=593
If any of these websites do not work copy and paste them into the URL box.
Hope this enhances your gaming experiences!
 

http://www.techspot.com/community/topics/razer-nostromo-gaming-keypad.189605/
Relevancy 38.7%

Can spectre 13 suppport razer core?There are two thunderbolts on spectre 13 ( the latest model)

http://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/Can-spectre-13-suppport-razer-core/td-p/5710910