Windows Support Forum

Would a 500W power supply power this

Q: Would a 500W power supply power this

Would a 500W power supply power this

AMD Phenom II X4 955 Black Edition


Nvidia Geforce GTS450 1GB PNY

Gigabyte SKT-AM3 GA-880GM


DVD RW Drive

Relevancy 100%
Preferred Solution: Would a 500W power supply power this

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link (This link will automatically start a download of Reimage that you can save to your computer.)

A: Would a 500W power supply power this

Hi QGamez,

I reckon a 500W wouldn't be enough but a 750W may be the right one. I had a look in a few forums and they had 650W & 750W etc but not 500W.

But wait for more input from the others and see what they have to say
Relevancy 82.15%

Do you think a 500W XCLIO Power Supply
could do well with 2 7600GT's in SLI
With an AMD x2 3800+

A:500W XCLIO Power Supply

That power supply is listed by Nvidia as SLI certified for that configuration of graphics cards.
Relevancy 82.15%

Heya all,

I was was looking at this power supply...


And I was wondering what does the 90% efficiency usually mean? on a continuous basis? or only at peak performances? or what?

Because if its on a continuous basis, dang, I need to get that to cut down on my electric bills, hahaha.

Thanks for the help in advance,

A:XG Magnum 500W Power Supply

i would think that it either has something to do with the appearent power vs the actual power, or it has something to do with creating heat and wasting power....maybe someone else could clarify
Relevancy 85.14%

Toshiba Satellite L305-5955, Ive taken apart and replaced power jack. Not directly soldered to motherboard. While still apart, and battery out/in, connected power supply and still absolutely no response. Power supply is NOT original, and slightly different specs, i.e original 19v..6.3A

current 19v..3.1A

A:Toshiba Satellite L305-5955 does not respond to power supply, new power jack

Almost certainly the problem is that the current rating is wrong, if the laptop needs
6.3 A of current, it won't function on less (just as you can't use a 3A fuse for a kettle!)
Unfortunately it must be the right current rating, I know, I've been caught that way too!
Maybe you can exchange it?
Relevancy 85.14%

I m interested in the Toshiba G laptop but have heard that you can t use it on airplane seat power It comes with a W AC power supply Vx A but I ve been told that most airlines limit seat power to - W max Lind sells a V car adaptor for the G but specifically won t include an airline plug for this reason which I can get independently of course I ve read some interesting electrical discussions on this board Can ya ll comment on the following or provide any general advice about power consumption Given that the voltage of the laptop and airline seat power pretty much match up - V if the amp draw on the laptop exceeds what the airline power supply can deliver what will happen Will it damage the laptop to feed it insufficient current Will it shut down Supply, Power Airline 120W limitations Toshiba Power G25-AV513, the laptop altogether Merely dim the screen If I remove the laptop battery which requires power to charge it how much will that reduce the power Toshiba G25-AV513, 120W Power Supply, Airline Power limitations need of the laptop I m not sure how to work the Toshiba G25-AV513, 120W Power Supply, Airline Power limitations math but the spec sheet states the battery supplies mAh at A output Does it require the same to charge it Most importantly on my hour transpacific flights will the DVD player work with that ultrabrite screen at the low airline power supply A nice feature of the laptop is that you can watch DVDs without powering up the Windows operating system it has a small linux OS for the DVD player Granted the DVD drive and screen are probably of the most power hungry devices Has anyone used a G or a similar W laptop on a plane The ToshibaDirect support staff were mum on the issue probably for legal reasons Thanks nbsp
Relevancy 85.14%

Ever since i got this new motherboard and CPU ive been having a bit of a nightmare Wont Gigabyte Power up ga-ma790fx - Phenom AMD 9850 Supply & Power with it Gigabyte ga-ma fx-ds -Latest Bios AMD Phenom Black Edition gigs PC ram Corsair XMS CM X - ATI Radeon The problem is that the motherboard will NOT power up at all with the of the latest power supplies watt i have It wont work at all with Nothing happens its just dead Arctic watt Jeantech PSU brand new and working Corsair watt HX PSU working It only seems to work with my Jeantech Watt PSU and i cant for the life of me figure out why Ive tried everything to get the board to work with the new PSU s I had thought that the PSUs i got were dodgy but after testing out one in an older PC it worked fine Ive removed all parts and tried powering up and i cant get it to boot up But the PC seems to work fine with the oldish watt PSU which i find just unbelievable Can anyone help with this nightmare Now on the Gigabyte site the CPU i have isnt listed as supported by this motherboard which is kinda worrying could this be the reason If so how the old Power Supply Wont Power up - Gigabyte ga-ma790fx & AMD Phenom 9850 PSU boots up I just want to have the fracking thing working with the right PSU nbsp

A:Power Supply Wont Power up - Gigabyte ga-ma790fx & AMD Phenom 9850

if I read the specifications right on your mobo... it implies that it has the 4 pin PCI-e input(power) but it also has the 8pin ATX power conector. (it may be simply removing a cap that is actually right next to the 4 pin connector, thus making it an 8 pin connector (thats how it was on my mobo)

Try using the 8pin power with your new PSU, see if that works.
Relevancy 85.14%

I have a Dell 8600 about two years old. When I plug in the AC adapter, it intermittently fades to the battery as though the plug was pulled out (its not) and of course the screen fades in an out when every time it swithces--it does it every 30 to 60 seconds or so. I switched to a different AC adapter (I have a Dell 600M with the same AC adapter)-same thing so I know it is something internally. Any ideas?

A:Dell Laptop Power Supply Fading In and Out--power jack is bad or loose?
Relevancy 85.14%

I picked up this Alienware 5700 off ebay to hopefully refurbish for my son but I'm new at this and still learning and so this thing has me baffled. The laptop is in pristine condition but shows no signs of life. When I plug in the power supply the green light on the power supply goes from solid green to blinking rapidly to the point you can barely see it. To me that would mean a short somewhere right ? If so where ? Has anyone else ever had experience with something like this ? I just don't want to go buying a new battery for a laptop that maybe fried already. Any help would be greatly appreciated.

A:No power, no lights but green light on power supply blinks rapidly

Remove the laptops battery and try the AC power only. If the green light does the same, it still could only be a bad AC adapter, or at worst, a shorted laptop motherboard
Relevancy 85.14%

Yesterday in my house,electric fuse was switched to turn on cooker in my kitchen. During this power delivery was stopped for 4-5 second only.
When power back on then pc automatically turns on and just before bios show me :"?Power supply surges detected during the previous power on ASUS anti-surge was triggered to protect system from unstable supply unit.
Press F1 to continue.? And then pc booted fine to Windows.

Is this normal ? Did it damage something? Why i get that message is this normal?

6700K stock
Asus Z170-P
Corsair 750 RM
Gtx 1080
SSD 1x
Relevancy 84.71%

I have a Sony VGC-RB42G computer. I recently moved my computer, cleaned off all the dust, and when I plugged everything back in, it won't power up. The light on the power supply blinks green, inside the motherboard also has a green light that blinks as well. It has a ticking sound too, but I am not sure if it is coming from the power supply or the motherboard. Any idea what could be wrong.

FYI, I have already unplugged everything from the power supply, pulled out the ram, checked the battery, and put everything back together and still no change. One thing I thought was strange was after I unplugged everything, I pulled the power into the power supply again and this time the green light came on but did not blink. It stayed solid.


A:No Power, Blinking green light on power supply and motherboard

Sounds like a Power Supply problem.
Relevancy 84.71%

Hi, I just bought an HP pavilion e9300 a few week ago. And I am going to upgrade the power supply so that I can get a new graphic card--ATI 4870 which requires at least 500 watt power supply. My current computer is shipped with a 350 watt power supply. I will probably get a 650 watt considering the 70% effeciency of power supply.
However, when I talked to an HP technician, he insisted that I could go for a power supply with no more 450 watt. Because the system I just got has a motherboard which has a max power limit 450 watt. He said if I go beyond that, the motherboard will burn out.
So what shall I do? I really want to get ATI 4870 work well on my computer.
Thx very much.

A:Does power supply with higher power rating really burn motherboard?

The long answer is "No".
Just be sure of the dimensions of the power supply before you order a replacement, as HP uses some pretty strange sizes sometimes, and you want the new one to fit with room to spare.
Relevancy 84.71%

Hello guys.  Can anyone help me understand the power supply on the HP Envy Phoenix 860-019?  The PCIE connector 6 pin connected to the GTX 960 has black and white wires.  Shouldn't there be yellow and black wires?  Yellow is usually 12 volt and black wires ground.  Is the 6 pin connected to my GTX 960  supplying a standard 75 watts of power or something else?  I want to install a GTX 1070 but the 6 pin wire colors are not the industry standard color scheme.  Also there is a 2 pin power connector with a white and black wire.  Usually a 6 pin and a 2 pin can be used together to connect into a 8 pin socket on a GTX 1070.  Will my connectors supply the needed power and connect properly because the color scheme on the wires make no sense. Thank you
Relevancy 84.71%

Sorry I don't know the proper terms, but basically the pin inside the jack where the power cord gets plugged into on my laptop was bent so that it's really hard for me to plug in my power cord and have it stay in place. My warranty with best buy has expired, so I need to figure out how to solve this problem on my own. I can't just leave it like this because the cord comes out really easily and I can't continue to work with such a tenuous setup. Anyway, is this just a matter of replacing the entire unit inside my laptop? I know you probably need more information, but I'm not sure what to provide, so please ask any questions. The laptop is a Toshia M-45, about 3-4 years old. Thanks in advance

A:Bent power supply pin - Hard to plug in power cord

umm.. bend it back so it's closer to normal? That's all I can say about it. usually works for me.
Relevancy 84.71%

It's been a while since I built a system from scratch and have a... errr... simple question

gfx: Sapphire HD3850 512MB Ultimate (passive)

MB: MSI P35 Neo2 FIR

PSU: Seasonic M12II 500W

The motherboard has a power connector for the graphic card next to the slot.

Is there any reason I should connect the power for the card to the power connector on the board instead of directly to the power supply?

A:Graphic card power to power supply or connector on motherboard?

First time I have ever seen that feature. I like it. I'm thinking that is a neat/easy way to partially eliminate cable clutter from the PSU. Give it a shot, you can always revert to PSU cable if you wish.
Relevancy 84.28%

Working on a dell dimension 2400,think may have bad power supply.Anybody know if that model uses a proprietary PSU? or will a regular industry standard one work?

A:Dell Power Dimension 2400 power supply

Should be a standard ATX PS.
Relevancy 84.28%

Ok so it's time again for me to pick a new power supply however I'm in need of some help determining the appropriate wattage for my hardware setup AMD Phenom II X nm AM GSkill Ripjaw X GB Dual-Channel DDR MHz - - - new a Consumption-Picking Supply Hardware Power Power Corsair TX w I dont think its the V ASUS M A AM r here are the voltages listed on speccy if they are of any use V V V V CPU CORE V VIN V VIN V V V VIN Hardware Power Consumption-Picking a new Power Supply V VIN V VIN V ASUS ATI Radeon HD x in Crossfire w ea GB Patriot Pyro SE SSD GB OCZ OCZ-ONYX SSD LG HL-DT-ST DVDRAM GH NS ATA I have terrible luck with random bsod's and power supplies pooping on me I want to pick one this time that will last me Also I have my power running through a Monster Power HT I live in a new apartment so the wiring should be ok I've dusted out all Hardware Power Consumption-Picking a new Power Supply of the components inside the case double checked my connections all that jazz I've got a cooler over my memory I am still using my stock cpu cooler but thats changing soon I get crashes idle too Any help I could recieve I would appreciate thanks Andrew

A:Hardware Power Consumption-Picking a new Power Supply

You have pretty much the same problem as me (getting BSOD's randomly). For me it's bulging capacitors on motherboard. You should take a closer look for capacitors on your motherboard. Dead capacitors look something like that:
Relevancy 84.28% we finally got my girlfriends new PC up and running. The problem im having...or more of a concern really. Is when you flip off the power supply, and then flip it back on, the PC gets a short burst of power. IE the lights and fans all come on for a second or two. Then you can press the power button and turn it back on.

Any ideas guys?

Relevancy 84.28%

Hi forum and pc gurus My problem is specified down to my PSU at least I think so W Logisys PSU - maybe the quality has something to do with it I paid for it from NEW EGG I have A Gigabyte GA- P-DS Motherboard a Intel Core DUO Conroe GHz processor with heatsink and get I HELL! POWER FROM PC built HELP! custom power to on! cannot SUPPLY my Fan Sapphire ATI X Pro GIGS of WINTEC DDR PC RAM SATA Maxtor GIG HD inch SATA Gig HD and two DVD Burner Optical Drives both IDE I have it hooked up like this two Optical Drives connected to IDE connector cable which POWER SUPPLY FROM HELL! I cannot get my custom built PC to power on! HELP! is hooked into the IDE input on the motherboard both are set to slave Two CD outs connected one to each Optical Drives to one CD input on the motherboard Both HD s are connected to SATA inputs on the motherboard one is set for master one is set for slave I heard that it did not matter but wanted to state that anyway then my ATI RADEON X is hooked directly into my only PCI Xpress slot The power connectors are then all hooked into their respective inputs on the drives and Video Card ANd last but not least all the Power button and LED connectors are hooked into their input on the motherboard wich I set up exactly as the motherboard diagrams and directions directed I turned the switch on the PSU to on and I only got a faint mouse like squeek then nothing not even the fan So I figured it was DOA so I had newegg send me another I got it today installed it hooked all the power connectors to the hardware then popped the switch to on nothing again and the same little squeeky mouse like noise I have no idea what went wrong and this is my first custom built computer for me so any help would be great In relation I did not wear a ESD protective wristband but I did constantly touch metal to keep myself grounded but I couldnt rule out ESD to the motherboard I hope not but it is a possibility AND what is the possibility that both PSUs were DOA and what is the possibility that W is not enough to power my entire system THANKS GUYS FOR ANY HELP IN ADVANCE Oh and yeah I have it set to V nbsp

A:POWER SUPPLY FROM HELL! I cannot get my custom built PC to power on! HELP!
Relevancy 84.28%

I shut down my Pavilion Elite for 1 week while away and now it will not turn on. The power supply light is on, I replaced the CMOS battery and the power switch is ok.

A:Pavilion elite power supply light on, won't power up

As you did not mention any message or display on the screen, I would use this tutorial for a step by step diagnostic.  It also helps to remove the side panel, and visually watch the CPU and rear case fan movement(s).  As you press the power button, pay attention to the fans. Also does the Power Supply LED stay ON? Or did it go OUT when you pressed the power button?
Relevancy 82.56%

Hi I m currently a computing student so I rely won't up power (poss. Computer supply) power on my computer a lot for my studies and was hoping I could get some quick advice troubleshooting on here So here goes I ve had a problem with my computer recently it s been working fine Computer won't power up (poss. power supply) for a year or so with no problems and then one day i tried switching it on and nothing happened I tried once more and then the power short circuited I then had to turn the power back on from the mains switch The strange thing is my housemate had exactly the same problem and after searching for the answer he was told it was due to a static buildup and the solution was to take out components graphics card RAM e t c and put them back in I tried this and no luck I was thinking due to the short circuit there may be a problem with a fuse in the power supply other then that I m completely stumped and would appreciate any help given Many Thanks for all help received nbsp

A:Computer won't power up (poss. power supply)

Does it happen with any other appliances? as in does using the toaster while using the kettle While your mate is in the Electric shower, telly on, or ironing?

Possibly a static build up, it is possible, Wher are you situated??
What voltage are you on?

What is the make and model of your comp? is it the same as your friends?

is your machine custom built or is it a brand?
Answer a few of them and we will try to narrow it down 4 you..

Mean while if you could get your hands on a spare PSU that would be handy. And remember when dealing with PSU's alway leave them to sischarge for at least 24hrs,
the 3 D'S, Disconect, discharge, dismantle.
Relevancy 82.56%

Hi All Happy New Year to all members and technical assistants I have a little issue in which I require some help and guidance I have a PIII MHZ replaced power Pc supply after wont power on MB Pc wont power on after power supply replaced memory with a ASUS MB- Recently it died on me and assumed that the reason Pc wont power on after power supply replaced I could not get to power it up is due to my power supply I went out and spent the money and bought a brand new power supply from a computer retailor I saw him remove it from a brand new case I Pc wont power on after power supply replaced installed the power supply trying to power it up I can see the fan rotate a little bit but not enough to power on Changed socket and it power on It booted up but after sec it shut itself off and now I cannot power it back on until min later when I went and change power socket once more This time the power did not stay up very long As soon it powered up no more than min later while it was loading windows Xp it shut itself off nad now again can t power it back on I have a power extention and power bar in which I used and both shuts the computer off Anything else plugged to it doesn t seem to do any affect This is the second new power supply I m trying What else can it be I have not tried to place the computer in a different room on a different plug yet I will try that tonight but in the meantime what else can I try Thanks for your help and listening Cheers nbsp

Relevancy 82.56%

My first post I received my new DVD DL -RW drive today and eagerly installed it I of course unplugged my computer s power supply while doing it After plugging the power back in the green up power disconnecting after power supply Computer won't LED on the back of the CPU started blinking never noticed this before and when I hit the power button NOTHING happen No fan Computer won't power up after disconnecting power supply turns no lights nothing When I unplug the power supply the green LED blinking gets slower and slower and after about minutes it totally stops I plug the power suppply back in and it starts blinking all over again and still the power won t turn on All I did was replace a CD-ROM drive with a DVD Multi drive I didn t mess with anything else so there should be no power supply shortage or problem Any thoughts as to what could Computer won't power up after disconnecting power supply be happening By the way I have a year old Compaq computer with ghz Athlon gig RAM no problems thus far nbsp

A:Computer won't power up after disconnecting power supply

While installing the new optical drive, you might have inadvertently loosened one or more connectors. Recheck all data and power cables to make sure they are tight, including all those to the motherboard.
Relevancy 82.56%

Hey, got quite a problem with my laptop.. It's a Medion Erazer X7813, worked well for ~2 years.
I was doing a graphics card benchmark yesterday and it stopped in the middle of it(monitored temperature, it was at ~80 degrees Celsius when it turned off). No bluescreen or anything just off and I couldnt restart after that(no fans nothing). I thought it might be the power supply, so I tested it, but it was doing 19v when not plugged in, but when I plugged it in and unplugged it again it was at 1v. When testing I unintentionally shorted the power supply and it showed 1v after that just as it did after plugging it in, is it shorting inside the laptop? Could it be the battery or something more serious like the MB? Any ideas are welcome!

A:Laptop gets no power, power supply seems to be working

The charging circuits on the laptop motherboard may be shorted...
Relevancy 82.56%

Hi everybody I tried to search on google about this but it s not really help and it never happen to me before so I post here My PC was running normally for a long time just couple weeks ago I sent supply or button problem? power Power my faulty video card xfx nvidia ultra to get warranty service and they sent me back another The new one works fine but Power supply or power button problem? a week later I tried to turn on my computer and there s no power at all No lights on Power supply or power button problem? no fan running just no sign of power So I check inside if there s any wire from the PSU is unplugged but everything looks good nothing seems wrong I m sure the power from the wall is good and the power switch on the back is on So I tried to check the wired again push the power cable to the mother harder and press the button it worked But that doesnt solve the problem if I put something heavy near the PC or the desk is vibrating a little bit the power turns off I press the power button again it would not turn on until I open the case and press the power cable to the motherboard harder it s on I then close the side panel it s off no power This is really annoyed me I dont know what else to do What caused this problem The power supply or the power button Can somebody help me My system specs ECS G T-M mobo Intel E Duo x GB RAM x SATA HD nVidia ultra video card ULTRA s watt PSU nbsp

Relevancy 82.56%

I have a server that I would like HD Power Supply Question Power Consumption & to upgrade to TB Hitachi HD s They claim max startup current of A and idling down in the A range The platform will be a -series X with a Core Duo Graphics card is small does not even require aux power connector Not needed to just supply the KVM with x No other signficiant sources of V drain exist other than the MB CPU a slim CD-Drive for installs a slim floppy and one additional GB Power Supply Question & HD Power Consumption SSD startup drive W when active I am looking at an W Corsair I ve heard these are quality supplies and I don t want Power Supply Question & HD Power Consumption multiple rails since no one really knows what sort of Voodoo goes on as to how they divide multiple rails up And I don t want to get into that I will be using a single-rail V PS I can add a second if I need to but I d rather not Do you think this will be sufficient for handling Hitachi hard drives quot Green quot drives are a non-starter since they will drive my Raid controller and then me off the deep end with TLER issues I do have staggered spin-up control of the drives with the controller Thanks for any help nbsp

A:Power Supply Question & HD Power Consumption

Power Supply Question & HD Power Consumption, Pt. 2 - Laptop vs. 3.5"

My second question is this - I have a BTV server that needs to be on at all times during the season to record shows during day and evening.

Suffice it to say that you CANNOT reliably put one of the critters into sleep/hibernate mode and expect it to wake up and reliably record a show. It just won't happen.

Now, this is one case where I can use "Green" 3.5" drives, but I am also considering banking 500GB 7200RPM or even 5400RPM laptop drives. These will all be on a raid controller, but since they will be in pass-thru mode or RAID 0 mode the controller won't freak over TLER like it would with RAID 5/6 and mark the drives bad. The controller also has more than adequate cache to handle a 5400RPM spindle as OTA HDTV generates little more than 2.5MB per second per channel. Even 4 channels at once is 10MB/s and that should not tap the ability of a 3Ware controller with cache on 5400 RPM RAID 0 or even pass-thru drives.

My question is this - 2 500GB laptop drives burn much less startup and idle current than a single 1TB 3.5" drive. Has anyone tried running multiple laptop drives on a RAID controller, and what sort of luck have you had? What sort of sustained throuput can you obtain?

Electricity is a huge factor here, at 12 cents per KWh. I can recover the marginal cost of 2 500GB laptop drives vs. 1 1TB 3.5 drive.

Case construction and drive cages are not the issue here.
Relevancy 82.56%

Finally broke down and started building a new system - I m too old to game this all started out as a home video project Anyway - gathered all my components now I m working to assemble them The case power plug. fan power New for supply, no schematic, looking came with New power supply, no schematic, looking for power fan plug. an Okia Model -ATX power supply But no wiring schematic I m trying to identify the power supply fan plug - what New power supply, no schematic, looking for power fan plug. seems to be it doesn t at all match the connector on the board And I ve got that positively identified by the board manual The board has a small male pin connection The only thing I can find that might be the fan connector coming from the supply is a small pin plug at the end of of the New power supply, no schematic, looking for power fan plug. strings of drive power harnesses Nothing tucked up behind the supply case or anything Is that likely to be it Or would that be for a floppy or something I tried to Google for a wiring schematic but could find nothing In fact nothing much at all on this brand of supply - just a couple places that sell them Please don t tell me I got an el cheapo that isn t worth having At the risk of getting ahead of myself in case I need to adapt something like that to the different style male connector on the board in this case or something else I may find as i progress is there some type of source for adapters or what would I do Bear with me this probly won t be the last question I ll dream up - just getting started While I m at it - the board manual talks about a connector for a power supply that senses board temps - that s another reason I d like to find a schematic or some sort of instructions for the power supply OH The connectors for the fans in the case don t match the connector on the board either The board has another small male pin connector for the case fan s but these have a larger bigger pin pin connector Again - I suppose it s adapter time Guess I ll need that source Thanks for helping an quot old quot computer student still and probly always in a definite learning curve nbsp

A:New power supply, no schematic, looking for power fan plug.

There are basically two voltages available to you: 5V and 12V. Doesn't really matter where you get it from - some pin on the mobo or some wire from the PSU.

From the PSU the yellow wires are 12V and red ones 5V, black is ground. The fan voltages should be written on the fan itself, the black fan wire is ground, red may be 12V or 5V depending on the fan voltage.

Fan headers on the motherboard should be labelled so, check with a voltmeter what pin gives out what.
Relevancy 82.56%

was watching dvd and pc cut out completely... high pitch beeping comming from my power supply on hp 110 desktop... when i unplug from tower beeping stops .. plug it back in and it resumes.  No power, no flashing leds ... just constant beeping... no pattern ... just beeps continuously.

A:constant beep from power supply... no power to pc at all.

let me be clear.... beeping not coming from tower.... it comes from the plug in power supply... the square box part of it.
Relevancy 82.56%

I have a generic MB (P-120 CPU ) which I just switched to a different case and power supply. It has an extra "six pin power type connection" in the middle of the board. Only one supply that I have matchs this and the wires are three green and three black. What is the funtion of this connector, it looks from the wire colors to be some form of switch.

Its a case of not wanting to swap out the power suppy from my other unit unless necessary. I have 4 other supplies and none have the extra wire, which is listed as P10.

Many thanks in advance.

A:extra power leads on power supply?

Sounds like typical extra +5V lead and can be used for any number of things...(riser cards,backplanes,to drive extra slots, etc.)
Without knowing the specs. on your motherboard this question is impossible to answer...Post Mobo identification (make/model) or obtain FCC ID and post that. Perhaps we can find a more definitive answer for you...BOL
Relevancy 82.56%

So I hooked my pc up after I took it w/ me to work becuase I though I was going to a lan tonight. But when I came home and plugged it back. I noticed the power supply box light was blinking. And it wont turn on. No power or what so ever. I need help BADLY


A:Power Supply Light Blinking. No Power :(!

Have you opened case to make sure all connections are secure? Something may have come loose while you were transporting it. Give us more info about your computer (e.g. make and model, cpu, ram, name of psu, etc.)
Relevancy 82.56%

Hello everyone - I have just assembled a new build It will not power up I need a suggestion to figure out if the problem is the case or the motherboard This is a mini-itx build power-up: power New or Build MB? no supply case's The case is New Build no power-up: case's power supply or MB? Linkworld LC - B This case comes with a volt watt external laptop-style power supply that plugs into the rear of the case just like New Build no power-up: case's power supply or MB? a laptop power supply plugs into a laptop - a barrel connector Inside this power connection connects to a power supply component that is not like a regular ATX power supply but is on a printed-circuit board New Build no power-up: case's power supply or MB? mounted on the case This has several capacitors and other stuff From that comes the -pin and -pin power supply lines for the motherboard I assume the -volt power supply for this external power supply unit is right since it came with the case It was watt The processor is an IBM t with TDP of watts Lower-powered CPUs can be put in a small so I assumed the power supply might be under-powered I ordered a -watt volt power supply with the right size barrel - and same polarity pos inside The MB is an ASRock H MV-ITX It is mini-itx form factor Still same problem Everything is connected correctly When I press the power-on button an external CD drive I have plugged-in spins up for a while But no power light comes on in the front of the case there are no POST beeps the fan for the CPU does not spin up No other signs of life So power is getting into the MB - the external CD drive is plugged into a USB socket in the rear panel of the MB After trying a watt and watt power supply I believe the problem cannot be the power supply cord Can it be that I have too little load I don t think so I plugged in another mm fan and an ol-fashion floppy drive just the power connection to add more load - same thing no power-up no POST nothing but the CD drive will spin up when I open-then-close it yet again So here is the help I need what else can I try -assuming the MB and case are fine is it more likely the case power supply is bad or the MB --Thanks nbsp

A:New Build no power-up: case's power supply or MB?

Well, I figured out the problem.
I am planning to re-do the older mini-itx system I have; it has gotten riddled with Trojan software for kids downloading games; it basically has been de-commissioned already.

So, I took the pico-psu power supply from that older computer, and hooked it up to the one I am making. Everything went perfectly.

So, I un-did that, removed the MB from case, disconnected the barrel-power connection from the case, unscrewed and removed the power supply that had been mounted in the case, put the pico-psu power supply back in place (I had to drill the hole for the barrel-connection out to be a little bigger since the pico-psu internal/external connection is threaded and held in place by nut with lock washer), and routed wires to be clear of cpu fan, screwed MB to stand-offs, and closed it all up.

now, everything is great. I like this linkworld case, but the power supply is worthless. I may try to get a few dollars back from the ebay vendor, to make me happy with a case that is less than what I should have gotten, but is working for me; I don't want to wait on returns, etc.
Relevancy 82.56%

Ok so lately I have been getting a BSOD at very random times and it looks like a Diver Power State failure. SO all of my friends and every website I go to makes it seem like I need to get a PSU. Right now I have a Quad Core and a 8800GT and 375W PSU. So my friend told me to get a new 700W PSU.

So, if the only fix is to get a new PSU? I tried to rollback my GPU driver but it didn't help.

So any ideas?

A:Driver Power Failure = New Power Supply?

You're greatly risking the health of your whole computer while running with such underpowered power supply. Do yourself a favour and get a quality PSU. That's the cheapest one that is enough and of good quality that I could find with a quickish search.
Relevancy 82.56%

My power supply died a few days ago and I have replaced it. My PC will now boot but will not send a signal (turn on) the monitor. Everything on the PC seems to work but it just will not turn on signal to the monitor. I have tried two different monitors with the same result.




Relevancy 82.13%

I assume so, but it never hurts to make sure. The card I'm talking about is the Nvidia GeForce GTX 670. I currently use the GTX 460 SE, which recommends at least 450W of system power. I may end up going with the GTX 660, which requires the same amount of power as my 460 SE.

A:Will a Graphics Card requiring 500W of system power work fine with my 650W PSU?

Yes, more available power is never a bad thing and the system will only draw as much as it needs. Just make sure it's a quality brand unit otherwise if it's some cheap unit then the wattage numbers are pretty much irrelevant.
Relevancy 79.98%

Hey, i'm building a computer but i haven't realized that the power supply i need is an atx 2.0. What power supply should i get??

I was orignally looking at the Ultra X-connect but it doesn't support atx 2.0 Damn.

Relevancy 79.55%

I have a Windows XP Home Edition SP computer GHz MB Ram GB HDD Last week I installed SP on my computer because I had SP and decided to upgrade A couple days later when I click on quot turn off quot my computer restarts NOT shutdown When I click on quot stand by quot The screen goes black then I get a quot blue screen quot Like in Windows But it Power Supply Power or Strip? s dark blue and stays up for only a second Then the computer resets The next day my computer stopped Power Supply or Power Strip? that but Power Supply or Power Strip? then As soon as I press the power button the TV in the living room goes all fuzzy I turn it off I remove the power strip thinking that it went bad I do use every plug but other power strips in the house are full too I plug it directly into the wall The restart stops still fuzzy I unplug ALL the connections in the back of my PC except the Power and monitor It stops Plug it all back in Put it in another outlet in my room Does it again Change HDD power cable motor could be causing this I finally realize that it s the TV tuner card The cable connection is already being split into ths I had a bad plug on the TV splitter so the fuzziness got fixed I put the power strip back on and the restart is going on again I tried on a outlet too Why is my computer restarting when I click quot Turn Off quot Is the quot shutdown exe quot corrupted nbsp

A:Power Supply or Power Strip?

Check your power management settings (and reinstall software if needed, from the manufacturer website). I've run across many problems with SP2 messing with power management settings...
Relevancy 79.55%

HP Palvilion m c Motherboard IPIBL-LA Berkeley http h www hp com ewfrf wc lc en amp lang en amp lc en amp product amp task N Power Supply DPS- ab- a http www itwinkle com hp posu html Hello all this is my power Is NO motherboard? it or supply POWER, first post First let me thank all NO POWER, Is it power supply or motherboard? for being here and sharing your vast knowledge My PC and power supply is above web-links included for more accurate description Also I have scoured this forum internet attempting to resolved and yes there is a ton of info The problem is the I cannot find specific details quot similar quot to my problem regarding how they determined the repair action other than replaced power or mobo So hopefully when this is resolved this will help someone with my similar problem - Problem gt PC will not turn-on just as if not plugged into power source -- Sypnopsis gt Nothing unusual happened as far as I know Shut-down PC for the evening as usual next day went to turn it on nothing - Troubleshooting accomplished -- Checked power outlet amp cords checked good -- Green light on back of power supply is steady green normal indication -- Removed power supply to test with multi-meter Strapped jumpered pins green wire with ground blk wire All appears normal everything is in range of specifications values below pin pin pin pin pin pin pin pin pin pin pin - pin pin pin -- Tested my power button wires for continuity on PC case properly shorts -- Reassemble everything still nothing -- Disassemble entire PC motherboard is sitting on cardboard box --- Items plugged into motherboard -pin atx plug and from NO POWER, Is it power supply or motherboard? power supply -pin plug volt from power supply gig ram stick CPU amp CPU fan - Goal gt power-on motherboard -- Tried shorting power button pins nothing -- Tried shorting reset pins nothing -- Jump-started NO POWER, Is it power supply or motherboard? atx plug with paper clip POWERS ON See link below for example http www youtube com watch v FCspIGgBV amp feature related Unfortunately unlike the youtube video when I remove the paper clip I lose power and back to square one - Back to the PS tested PS with strap jumper on when I remove the strap the ATX loses power through its plugs though the green light stays constant green There is no external on off switch on the power supply -- Should the power supply lose power once the strap is removed -- If so how does the power supply know to stay on -- Any help is much appreciated trying to determine if power supply is bad MOBO etc and if I can repair it Also I cannot swap items I do not have any additional parts laying around ADDITONAL NOTES - When powered on the mobo pwr-btn pins and the reset pins have voltage accross them volts dc pwr btn pins though has quot NO quot effect when shorted volts dc reset pins resets when shorted it works the way it should - Attached additional items to see if I could fully boot PC System Fan note will not boot without this fan plugged-in quot ERROR System Fan Has Failed Service PC to prevent damage to the System Press F to continue quot video card geforce gt hp pn- key board plugged into PS keyboard port mouse plugged into PS mouse port Hard drive When strapped I can boot competely up and log-on to desktop When I choose quot restart quot via windows soft button it resets properly When I choose quot shutdown quot it will shutdown but then I have to remove the strap and reset the cmos I get no display unless I reset the CMOS to boot up properly again I m guessing ultimately its the power supply Since the problem directs back to losing power The PC boots properly when I make the conditions right so that would most likely eliminate a motherboard or cpu problem What I don t understand nor can I find any info on is how does the power supply stay activate I m aware of the shorting of the power button pins on the mobo Probably thinking too much into it but the power supply seems to be working accept for the mystery quot no po... Read more

Relevancy 79.55%

Came home walked in and noticed my PC was off monitor was on speakers on modem everything on as if the power had blinked out for a sec and my system had shutdown No Supply, lights no to Power power I pressed the power button on the front and got nothing i checked the power supply s own power on off switch on the back and got nothing no light that its on or anything thought maybe it was the cable so i plugged it into my other pc and the No power to Power Supply, no lights cable No power to Power Supply, no lights works so i m thinking maybe the psu went bad or took a hit Im guessing i just need to replace it How difficult is it to replace it by yourself i ve never done that before and do you think that its the psu at fault I m thinking that if there is not power on light then something is wrong big with it my heat temps stay down between C and C at the highest Also can i replace it with just any other w power supply or does it need to be a specific kind company i bought it from online listed it as dual core certified w psu no mention of v rail or anything else i guess i can get that from them if they have it on file nbsp

A:No power to Power Supply, no lights

Well sounds like your power supply took a power surge. Well to start with i would try a power supply. Now about replacing the power supply cheap is not the best way to go, learned from experience. Here is my recommendation:
And for replacing a PSU not hard. If you need help removing it Post back i will walk you through step by step if need be.
Relevancy 79.55%

Somebody, please tell me what this is and what's it used for?

Relevancy 79.55%

My PC suddenly shut off and wouldn't turn on, but the mouse and motherboard lights were still on. A tech took my PC and ran some tests. I assumed that either my Power supply or my Motherboard was unfunctional but he called me back telling me that it was neither, and that the problem was coming from "a part" that gave power to the motherboard. The replacement of this part would cost $80.

Am I getting ripped off? What part could possibly cost $80 and isn't the Power supply?

Relevancy 79.55%

Ok so i do know what the no Power and supply 100%, mobo are power problem is this is more about what i can do to use my computer until i can fix the problem Ill start off with what the problem is My computer wont turn on from the get go i knew the power supply was okay Power supply and mobo are 100%, no power because the mother board has a green light on it showing that its getting power of course just in case i tried putting a new supply in but there were no changes At first glance the mother board looked good No blown resistors or anything of that sort i sent it to a friend to check it out though once again just to be thorough and sure Finally after Power supply and mobo are 100%, no power hours of tedious searching i found the problem The chip that the power button plugs into has blown out Very happy thats all it is Now my question to all of you is is there anyway to bypass using that board so i can run my computer until i replace it if i just unplug the little board that the button is a part of the computer obviously does not turn on when i attach the computer to power and i dont know how i can trick it into turning on without having the use of the power button Any info would be greatly appreciated Thanks Ryan nbsp

A:Power supply and mobo are 100%, no power

There are some motherboards that have a power on button directly on the motherboard. I don't suppose you have one of those? There are some BIOS' that can enable the keyboard to power on the PC by pressing any key. I'm using one of them now. Of course, the problem with that is to get the PC started in the first place so you can change the BIOS setting (if it has that setting).

What motherboard do you have?
Relevancy 79.55%

Went to dinner left PC running Came back PC shut down Would not restart no power lights fans LEDs nada zip zilch We had a brown out a few days back I figured the power supply finally crapped out supply...still no power power!? new installed Tonight installed a new power supply Antec Smartpower w No installed new power supply...still no power!? change I push start button absolutely nothing I have checked a power at outlet OK b changed power cords original is installed new power supply...still no power!? cord OK but I notice when I insert the plug into the recepticle there is a spark Now I m not much of an electrician but I don t think there should be a spark for just plugging it in c I have plugged my backup PC this one into the same outlet on the surge protector and it s running fine soooo the problem is in the computer If I plug the power supply in shouldn t the PS fan run It doesn t Can there be something bad on the shudder mobo like maybe the start switch or something Also confusing me I have sata HD this new PS has power plugs for sata My old power supply only had the regular pin plug that I plugged into the sata HD yet it ran fine Do I need to use the sata plugs on the new PS Cripes I m so freakin computer impared Please need help this is my gamer PC and I m a BF junkie Thanks for viewing this thread AMD GA K NS ATI XT mb Turtle Beach Santa Cruz gig PC XP Home sp nbsp

A:installed new power supply...still no power!?

Is the LED lit on the MB? Try bypassing the front case switch by putting the blade of a small screwdriver across the pins on the MB that the switch connects to.
Relevancy 79.55%

I have a Delta DPS-150GB B Power Supply out of an Apple Macintosh Power Mac computer. I would like to use it as a 12v/5A power supply for my model train layout. I have a couple important questions:

1) I need to know the pin-outs of the connectors (1-4pin, 1-14pin, 1-5pin on ribbon wire), specifically which ones control start-up and various voltage outputs.

2) Being a Switching Power Supply, I think there must be a load on at least one of the output rails. Can I create this with a simple resistor of some sort? if so, how exactly what would I need to do.

I can email photo of the connectors if that would halp. I would appreciate any help. Thanks.

Relevancy 79.55%

hey I have an interesting problem supply jumper power and power When I plug the atx power supply into my motherboard as soon as it makes contact the psu fan spins about times then power supply and power jumper stops which i suspect means its testing to see if it works or something But i have a computer out of the case and i power supply and power jumper might have made the fatal mistake of useing a paper clip to quot jump start quot the motherboard by contacting the power jumpers now whenever and metal contact is made paper clip the actual start mechanism anything it won t cut on Well me thinking i must have messed up the jumpers cut the psu green and red cord i double checked to make sure they were the power on cords and twisted them togeather and put electrical tape around them I know its not the best job but i was just testing a theory When I plug in the psu and its plugged into the motherboard the psu fan becomes turned on because of the twisted on wires and spins But the cpu fan and motherboard remain powerless I am wondering if i ve done something wrong or have screwed something up any help would be appreciated ps before the problems begain i installed the motherboard into a case because it was just components and i founnd a cheap case When I installed the motherboard I screwed metal screws into the contace points where the motherboard is supposed to rest I heard somewhere metal is bad for the bottoms of motherboards so that could be it thanks nbsp

A:power supply and power jumper

Disconnect External Power To The Wall Socket Before Messing Around In The Box!!!!!!!!!!!
Relevancy 78.26%

hi guys as per one of my friend I could replace my memory RAM up to GB so I ve ordered Power Light Motherboard/Power 8300 AMBER Green XPS - Supply - Light a couple sticks of Kingston HyperX nbsp so I ve took slot and replaced GB Hynix RAM by GB HyperX Now I have a good old CPU that doesnt work plus it smell like burnt plastic with no apparent damage to XPS 8300 - AMBER Motherboard/Power Light - Green Power Supply Light the board or RAM nbsp Startup x BEEP No BIOS Motherboard Light Solid AmberBootup Light Flashing AmberPower Supply Light Solid Green I ve tried booting from nbsp a single RAM unit on slot one then slot two and nothing has changed anyone can help Motherboard Y MRGhttp www findlaptopdriver XPS 8300 - AMBER Motherboard/Power Light - Green Power Supply Light com specs- y mrg-dell Processor i Primary SSD Kingston HyperX Savage added Secondary Seagate TB TB added Barracuda New RAM nbsp ts HX C FK http www kingston com dataSheets HX C FK pdfOld RAM nbsp HMT U CFR C-H https www amazon com PC - - MHz-Hynix-HMT U CFR C-H -Unbuffered dp B BTRAS
Relevancy 76.97%

I just purchased a new Dell PC.  I now get this message when I turn on my speakers:
power surge on the USB port. Unknown USB device needs more power than the port can supply. I have no idea why or how to fix it. Can anyone help me?

Relevancy 76.97%

For the last two weeks every time I start my Dell INSPIRON E while using the power supply I am greeted with the following message quot The AC power adapter type cannot be determined Your system will operate slower and the battery will not charge Please cannot Supply power - AC type be determined....." "The adapter Power connect a Dell W AC adapter or higher for best system operation quot I press the F Key and everything works fine I ve read about this on other websites and most say it s a design Power Supply - "The AC power adapter type cannot be determined....." flaw in the power supply after the cord has been properly wound around the supply as designed Apparently a few of the cords internal wire strands Power Supply - "The AC power adapter type cannot be determined....." become broken and cause this message My computer is from June and shouldn t be having this issue so early or ever This seems like a flaw that should have created some type of manufacturers recall since so many people are having this issue I m of course out of warranty will Dell replace this free of charge nbsp

A:Power Supply - "The AC power adapter type cannot be determined....."

You are correct, the failure is due toloss of the power supply ID signal. Sometimes this happens because of strain on the plug, which breaks the signal wire. Some even are so severe that the insulation breaks away from the plug; this is due to rough handling. The other cause is one or more of the power socket solder connections to the system board become broken. This also is related to severe handling. I have seen one case where all three power connections and three of four mechanical connections were disconnected. If the power supply is bad, a replacement will cure the problem. If not, then the socket is bad, and this will require a system board replacement. If you are experienced, you can try to resolder the connections. I am experienced and was not able to get my daughter's E6000 to work by resoldered. More recent Dells are using a replacable power connection board which is a much cheaper repair.
Relevancy 73.53%

I went from a "compUSA" 400w to a "Real Power" 500w Thinking my PSU was going south, and yet things still dont seem rite,, like my MSI PcAlert says my 3.3v is at 3.14v and my +12v is at 11.64v (at its lowest) and my +5v is at 5.13v is this ok?
I would think not. maybe my MOBO is crapping out?
I mostly use my PC for gaming both single player and online.

This is what i have running:
1 CD burner
1 DVD-rom
5 case Fans (1) 120&(1) 80mm IN & (3) 80MM out
1 1394 Fire-wire pci card
VGA cooler (1 fan)
HDD cooler (twin fan)
Is that too much?

A:"Real Power" 500w PSU??

It is not too much, but your PSU is not one of the well-established makes. Antec, Enermax etc. will keep your voltages at the correct levels. As a coarse rule-of-thumb, the heavier a PSU, probably the better quality it is.

Compare the weight of your PSU with a similar one from one of the brands I mentioned earlier.
Relevancy 73.53%

Is 400W would be enough for a computer with: Intel Core Q8300, ATI Radeon 4890 1GB, 4GB RAM... ? (I would use computer for gaming too.)
If not, what would be recommended?

Relevancy 70.09%

Hi all im haven a problem with my power supply in this dell intel pentium i have I originaly had w of power i then upgraded to I hooked everything up correctly plugged the power in and on the front of the comp where the power light is Help Supply Power )= it started blinking orange I had Power Supply Help )= no clue why it was doing this so i contiuned to turn it on but nothing happend I then took it down to best buy he looked at it said everything was connected properly and could only say it must be a Power supply problem I then bought a Ultra V Series w power supply I hooked it up put in power and same damn thing happend it was blinking orange in the front I really have no idea why or what is causen this and its really stressen me out If any one could possibly help me id be very very very greatful On side note the nd new power supply the Ultra V i plugged the power into comp then went to put in the soket and there was a spark so im not sure if that could of fried the power supply but i cant tell sense it didnt smell funny and sense its acting like the st power supply i got i didnt think that was what happend nbsp

A:Power Supply Help )=

Hmm, I think it's probably a current surge or something. I highly recommend not plugging the PC directly into a wall socket. It can seriously damage the PC if there's a surge. Use a surge protector instead. And yes, u might have fried ur new PSU.
Relevancy 70.09%

Ok my computer has no sound and also the usb ports dont work. Smoke came out of the power supply, so i think its died.

What i want to know is can i buy any power supply to replace the old one. My old on is a 250 w atx.

Thanxs Baltan

A:Power Supply?

What are the rest of your system specs?

Did it happen all of the sudden happen or where you messing around with it?
Relevancy 70.09%

Well I am about to make a computer that has:

2x 7600GT PCIe SLI
AMD 4400+ x2
2x 250gb HDD 7200 RPM 8MB Cache
2 gig DDR 400 (dual channel 1 gig)
Audigy 2 ZS Platnium
DVD Dual layer burner
CD+RW Drive
Floppy Drive
6x80mm fans

So my question was, what size of power supply do you think I need for this. Most people tell me 500 watt. But I am not sure. Thanks in advance for any help.

Relevancy 70.09%

What's the difference between an ATX and an ATV power supply?
Can I install a 300W ps in a machine that had a 250W ps?


Relevancy 70.09%

Ok so here s the scenario I ve had this PC with the same hardware for the past year no changes to the hardware whatsoever I ve been at college with the PC all semester and hadn t had ANY problems with it I brought it home in the car and upon returning home I encounter a problem While windows is loading the screen flickers and Possible power supply? bad I hear a soft but high-pitched squeal come from my power supply or at least thats where it sounds like Possible bad power supply? its coming from The PC then reboots After coming across the Windows XP loading screen before login the one with the bar across the bottom right when the Possible bad power supply? graphics load I hear the sound and Possible bad power supply? it reboots again It does this in circular fashion about - times and then it loads fine I was then able to use the PC normally for the next hours or so After waking up in the morning I move my mouse to turn the monitor back on and I hear the sound and it reboots it again starts the circular rebooting Basically what causes it to do the initial reboot is random the only consistency is when I am coming back from having the PC be idle the monitor turns off but thats it and when I initialize an application after being idle Those are the most consistent times the rebooting starts But it is completely random otherwise Its gotten to a point where now sometimes it will start to make the noise and not reboot sometimes the screen will flicker and it will continue on and sometimes it will reboot I ve played - hours of intensive high-end graphics games with no problems I ve made sure all fans in the box are working there should be no reason the thing is overheating but I guess its not impossible At first I thought it was due to a loose connection like something was joggled loose during the transfer from school- gt home or that dust or something had caused hardware to have issues so I cleaned it out Another noise that it makes that sounds different than before is it sometimes sounds like there is something in the fan on the PSU almost sounds like a pebble Other than that nothing has changed Could it be the PSU I just don t understand how I can get random bursts of - hours with no problems and then all of a sudden reboot times in minutes Anyways thanks to anyone who has read this I appreciate your time Joe if you need hardware info i e PSU wattage system specs let me know nbsp

Relevancy 70.09%

I have a HP Pavilion A610Y, and it wont boot. I just plug it in, and It sort of "clicks" (i am sure its not the hard drive). The HDD light blinks every second, along with the power supply light on the back. The CPU fan doesnt start, the system and power supply fans dont start either. The powre supply fan "twitches" and it seems like the system is in some kind of loop. I called the tech support, and they told me I needed another power supply. This is a fairly new computer though... (1 1/2 years). It doesnt go to the post screen, and no display on the monitor... I think it could just be a jumper for the power button or something similar.... please someone tell me what is going on

A:Power supply??

edit: here are the specs for it:
2.6 GHZ Intel P4 Procesor
80 GB Seagate HDD
Intel Extreme Graphics 82845G Chipset
MSI Motherboard
Realtek AC'97 Audio
Relevancy 70.09%

alright im gonna be runnin a amd 4800+ x2. and like 1 or 2 gb of 3200 ram. and a evga 7950gt Oc'ed graphics card. what would u say a good power supply would be to run that???? in the future i might add a second card. so yea give me some links or something. thanks

A:power supply
Relevancy 70.09%

Hi - I've just replaced the power supply on my pc, tried to switch on, and I'm getting the message : pxe-e61 : media test failure, check cable. I've been searching for help and have tried to do what people have recommended to other people - no luck. I really need some help. I've been into my bios, and my primarey ide master and slave are saying that they're not installed...what am I doing wrong? Please help!!


A:power supply

What is your PC? a brand name or home built? what is the brand and wattage of the PSU? what are your specs? ie; motherboard, memory, video card?

if it is an intel board did you connect the 4 pin connector from the PSU to the plug in near the CPU?
Relevancy 70.09%

I have a friends Ultra 500w power supply that has past the test for the plugs, but does make the light in any room or house flicker once when you plug in the power cord. The unit switch is turn off. The mother board is shot and I think maybe this might be the trouble maker.
I have never had one do this, so I thought I would put it out there to see what you think.

A:Power supply

sunnyeagle said:

I have a friends Ultra 500w power supply that has past the test for the plugs, but does make the light in any room or house flicker once when you plug in the power cord. The unit switch is turn off. The mother board is shot and I think maybe this might be the trouble maker.
I have never had one do this, so I thought I would put it out there to see what you think.Click to expand...
wtf you needa 500w for lol, 250-300w is fine for anything man. i would most def. say that the 500w power supply is your troublemaker. trash it or sell it and get you something smaller and more scaled to what you will be doing or what your friend will be doing
Relevancy 70.09%

Well, I don't know how this happend but I'll try to explain it.

Yesterday around 7:00 one of my co-workers had informed me that the power at his house unit went out, so i called my brother and he confirmed it (he was using the PC at the time the power went out). Now when I arrived home around 10 or so he told me the PC won't turn on... I look and the power button is just flashing repeatedly....anyone know what could have happend to it?

A:Is it my Power Supply or something else?

Something about the ground on the PSU being broken and now you need a new PSU and/or motherboard. Before you do that though, try changing the wall plug or surge protector plug that the computer is plugged into.
Relevancy 70.09%

These are probably the stupidest questions in the world but I just bought this thing and the Use Manual wasn t in the box can t contact them until Monday about it so I have to ask as this is different from any power supply I ve used before apparently This is an older power supply I needed an ATX with the aux Help Power Supply power connector for my year model Gateway computer It s a Fortron FSP whatever http pcpartscollection com fspfs siled html power supply Well the first question is that black nob in the second picture It spins like a volume control nob one side is a the other a Power Supply Help - I m guessing it has Power Supply Help something to do with fan control Also there is no voltage switch Every power supply I have ever had has had one is there a reason there isn t one on this model I have to wait until Monday to contact them about my manual was hoping maybe someone here would know something I don t want to hook this thing up until I understand it nbsp

A:Power Supply Help

The black knob is the fan speed, and the power switch is right about the A/C connect, look a little closer. Looks like a standard P/S form-factor to me. FWIW, I've seen P/S models without the A/C switch, but pulling the cord out does the same job.
Relevancy 70.09%

I'm putting together a new system-
Asus P5B Deluxe WIFI motherboard
Core 2 Duo 6400
2 gigs corsair ram, 2 sata hard drives 250 gigs
Geforce 7900gs graphics card.

I'm looking at a Seasonic 500 watt power supply- is this enough? or do I need more?
Thanks for any input!

A:How much power supply do I need?

500W should work just fine although I'm not that familiar with Seasonic. When it comes to power supplies I try to stay with name bran such as Ante,Thermaltake and a few others
Relevancy 70.09%

I feel as if my power supply isn't enough for my computer. My computer runs fine but sometimes when I'm viewing a web page or opening files on my computer I get a sort of staticky sound from my power supply. A while ago I upgraded my computer to handle the latest games. I had a power supply in it from my old setup, I think it was 300 Watt. After I got a new motherboard, processor, video card, RAM, etc, the power supply buzzed real loud like it couldn't give my PC enough power. So I upgraded to a Smartpower 2.0 480 Watt power supply. The buzzing went away... Almost. I can barely hear it sometimes, like I explained above. Is this normal?

Motherboard: Asustek A8v-E SE

Memory: 1gb

Video: Radeon X1600 Pro Sapphire Edition

Processor: AMD Athlon 64 3200+ 2.00 Ghz

A:Power supply

480W would power your current system fine. You could have a bad failing fan (bearings) in the power supply fan. You sure it is coming from the power supply?
Relevancy 70.09%

Where would I be able to find a good Power Supply that has more than 500 Watts?

A:Best Power Supply

What exactly do you mean by "Where"?
All I can say is Antec would probably be the best option. (A little expensive.)
Relevancy 70.09%

I have a Pentium 4 Processor (478) which I want to use to build a system. I'll probably use an Asus socket 478 motherboard. Problem is this: I have been told it needs a certain minimum power supply. Can you please tell me what is the minimum I can get away with.
Many thanx.

A:Which power supply

Well, generally speaking the bare minimum that should be in any modern pc is 350watt. I personally think this should be higher, say 450 or more, but a good quality 350watt should do the job.

Of course this all depends on the number and type of components you want to install. High-end components will obviously draw more power than cheap stuff. Here's a good guide to use when configuring your system. It will give you a ballpark figure of the minimum you need for any system, so it's a good idea to add 50-100watts to this number to make sure you have more than enough.

Also, keep in mind that quality matters much more than anything else. Cheap PSU's cause all kinds of system problems and instability. Antec, Enermax, Thermaltake, and Ultra are all good brands.
Relevancy 70.09%

Well I have another question.My PC is a Dell Dimension 4400 series.I have a 150 watt power supply in my computer and want to upgrade. Problem is I have had different people from different places tell me things. Some say if I put in a higher power supply it will fry my mother board.Others have said it won't. from searching on google I have found that frying the mother board was true but halfway through production they changed something to where you could upgrade the power supply with no harmful effects.Can anyone one here tell confirm this or tell me how to tell which 4400 I have, upgradeable or not?
Thanks in advance.

Relevancy 70.09%

Hi guys new here I m setting up a new pc sooo a few questions here I m planning on getting an Asus A XM-plus motheboard Amd X K cpu and Sapphire R GB video card so how much power supply would be enough - W would be an overkill Is all of this fully compatible Do I do supply here? need much power How I need a sound card modem or special cooling or something I How much power supply do I need here? already have gb Ram sticks and HDD don t really need DVD drive I m also thinking in between Antec V case and a lot cheaper LC Power Gaming b Air wing Midi how much quality difference is there in between these two Also how much improvement is there in between this card and my current one sapphire r gb Are there any parts that you would exchange for something else I m on a tight budget but I don t mind spending a few extra bucks if it be worth in the long run Thanks in advance nbsp

A:How much power supply do I need here?

Power supply: 500+ should be adequate. However, the quality is MUCH more important than the size rating. Look at a brand such as Sea Sonic.

Other hardware depends on your requirements. The onboard audio chipset should be fine in most uses, but it largely depends on your output device (ie: speakers or headphones).

I've not used with of those cases. A case is a matter of personal preference. I've used cheap generic models and high end models over the years. They all work fine. The difference is usually in options and features. My personal brand preference is Cooler Master. Good quality, and average to excellent features based on model.

Quite a bit of difference between those two cards.
Relevancy 70.09%

hey guys i need new power supply greater than W I currently Which I Supply buy? should Power have W which is not that good because I can t run my cpu on full speed Should I go for generic one which is cheap its only bucks What do u guys think I also looked for quot Which Power Supply should I buy? OptiMax quot which is W and only for bucks Is that better than generic Should I be concerned about the volts or rails I don t know anything about powersupplies please help my Which Power Supply should I buy? specs Operating System Windows XP Professional Sp installed Case NETLINK IN W ATX CASE W FRONT USB PORT P READY Motherboard ASUS A V SOCKETA KT DUAL DDR AGP PCI SATA SOUND LAN MOTHERBOARD CPU AMD ATHLON XP K FSB SOCKET A RETAIL BOX running at CPU Heatsink VANTEC AEROFLOW SOCKETA cpu cooler TMD RPM CFM Memory GB PC DDR SAMSUNG RAM Video Card ABITR - CDT RADEON MB DDR AGP X Hard Drives X WD CAVIAR GB INT ATA HD LP MS MB RPM OEM cASE FANS FANS INFLOW OUTFLOW thanks guys nbsp

A:Which Power Supply should I buy?

U dont need a high end one
buy one for around 60$ from antec, enermax or viewsonic
Relevancy 70.09%

I m thinking of buying a new power supply of at least W but What power look for in a supply? to I don t know the first thing about them I want a new supply to fix What to look for in a power supply? a freezing problem I have with games and Device Manager and a problem with Windows Media Player where it displays green on divx and x-vid I posted to the games forum and we What to look for in a power supply? pretty much narrowed it down to the power http forums techguy org games What to look for in a power supply? -momentary-freeze-during-games-device html I have two DVD DL -RW drives a G rpm had drive an MSI nvidia motherboard a Athalon processer a floppy drive and an ASUS Nvidia N video card all to be hopefully powered I also have two side case fans that I d like to power and I could use a rear one My obsolete power supply is a Works Power W TFC W Here s a site with some info on it http www directron com w tfc html caption I am a poor unemployed post-college student and thus don t want to drop a lot on the power supply Knowing very little about power supplies I found these two at Newegg that looked good http www newegg com Product Product asp Item N E http www newegg com Product Product asp Item N E All advice is welcome thanks in advance nbsp

Relevancy 70.09%

so ive decided on upgrading to the 7800GS for my computer (meaning santa is going to give it to me) however, I recently learned im stuck with a 350w powersupply in my computer. The bfg site recommends 400watt minimum with a 12v-20A rail. Ive already been scrambling on newegg shopping around, but Im an agp user still, so how will i know which powersupply will run an agp card @400w or better with a 20A on 12v? the specifications on some of the ones they list are vague as far as what periphrials it can run. some say pci-e but none of the ones ive looked at say agp connector. price is somewhat of a factor here (obviously this is an outdated system so im not looking to break the bank on a powersupply. but the better quality is important i understand)

A:power supply

Agp cards don't have any special power connectors on them and thats why you cant find one that says it does!!!!

Any good quality 400watt psu should do you!!
Relevancy 70.09%

Can I use the the P50 with a smaller, 65W power supply? I currently own a W530 and that will not work. Thanks,Michael

A:P50 power supply

I am also interested to find out if there are any power supply options for the P50.  The one supplied (180W?) is huge and heavy.  The heaviest I've ever had.  Mostly I will be on workstation docks (if they ever arrive) but lugging that adapter around for portable use will be a bear!  

. . . . . Zeke . . . P50, Win10x64 (current) . . . T510, Win7x64 (6 years).
Relevancy 70.09%

my pc wont power up th cd roms no video not even a green lite on the monitor and it wont restart or turn off by the case buttons help please

A:could it be my power supply

jrad1966 said:

my pc wont power up th cd roms no video not even a green lite on the monitor and it wont restart or turn off by the case buttons help pleaseClick to expand...


The monitor is usually powered by a seperate mains lead, unless you have one of those older machines where the power supply has an in and out socket and the monitor is fed from that.

If your PC wont start up take a look at this google page I found , theres plenty of links to advice.

Relevancy 70.09%

I ordered it on Monday, and it arrived yesterday. There sure are alot of wires with this one. I am going to attemp to put it in tonight. Is there any thing I should be on the watch for? The instructions are pretty vague.

A:New Power supply

Ground yourself! Be careful of wires stuck in devices, and look and make sure that you new psu has no frayed/stripped wires. Good Luck!
Relevancy 70.09%

hi i have Power supply an amd athlon x processor at ghz with gb of ram im getting an ti because for the price i can get a used but Power supply really good condition on for around bucks which is an incredible deal i just want to be able to play games like counterstrike global offense and some of the newer games coming out it doesnt need to be at ultra setting so i firgured this a good choice for the price but no i need a psu because all i got is an offbrand w in there now tell me what you guys think about the choiices i have so far or if u got something better http www ebay com itm Ultra-X -AT l-Intel-AMD- hash item ea e dc http www ebay com itm Black- -W pt LH DefaultDomain amp hash item c b d http www ebay com itm Thermaltake U-OCZGXS - hash item a a http www ebay com itm OCZ-Technol U-OCZGXS - hash item a a http www ebay com itm Thermaltake sFire-Ready- hash item cffa f http www ebay com itm CORSAIR-CX- CMPSU- CX- hash item a nbsp

Relevancy 70.09%

For a while now turning on my computer has been a chore So lately it has started taking more than one push of the start button to turn ot on Once it took over pushes of the button for it to fire up The button does not feel broken so maybe it s gotta be some thing else It does have a very Do power I new supply? short whirr sound like it wants to start but it stops and I push the button again m n S Do I new power supply? N CN MR Part number GN AAR ABA Tech Support Guy System Info Utility version OS Version Microsoft Windows Ultimate Service Pack bit Processor AMD Phenom tm Quad-Core Processor AMD Family Model Stepping Processor Count RAM Mb Graphics Card ATI Radeon HD Mb Hard Drives C Total - MB Free - MB Motherboard ASUSTeK Computer INC M A -M Antivirus Lavasoft Ad-Aware Disabled Do I new power supply? As suggested by adviser flavallee I am asking for thoughts and recommendations as to what brand and wattage if you Do I new power supply? all think that a power supply is warranted Thanks for all your help Ron nbsp

A:Do I new power supply?

For those of you who reply, his request is associated with this thread.

Relevancy 70.09%

PC went through a recent storm, was plugged into a surge protector, but they didn't unplug anything. Now it get power for a split second or if you mess with the power cord it flickers and makes a couple crackle noises. I want to just put in a new power supply, how do I know if the one I buy will work, does it matter or most power supplies will work on any system. plan is to get a 400W minimum.

Relevancy 70.09%


I'm ordering a new system, and I'd like to make sure the power supply is a good one, any advice on what do I look for please?

I am in the UK but I would guess power supplies are pretty similar.


Relevancy 70.09%

I bought a brand new HP a1630n computer and I want to know how many watts of power supply I have. It is because I'm buying a BFG Tech GeForce 7950 GT and its minimum power supply is 350 watts. I need to make sure I have the power supply. If someone could tell me how to check my power supply, or more preferrably know my PC models power supply it would be great. Thank you!

Relevancy 70.09%

ok i have a 20 pin power supply and my mother board is a 24 pin. can i still plug in my 20 pin power supply into the 24 pin motherboard?

here is a link which cleared up some issues but want to ask you guys.

A:Power SUpply 20 pin

You need to buy a 20 to 24 pin converter. They only cost a few bucks.

See HERE for an example.

Regards Howard
Relevancy 70.09%

I am looking for an affordable high quality power supply that will last a long time with 500-600W that supports an AGP card. Any suggestions? Thanks.

A:Power Supply

Some more specs would reall help.

Likely you will need just a good brand ATX 20 + 4 pin PSU, Go Antec, Enermax or Thermaltake.

I would go overboard here, when you buy you your next PC you will want a ATX 2.0 or higher PSU with a 24 Pin out. The next system will also likely require PCI- express.
Relevancy 70.09%

My power supply does not work. The green light stays on then when I plug it back in the computer the light goes out. I purchased a similar power supply which the company said would work but it did not. Do I need to let the power supply charge for 24 hours? Any input will be greatly appreciated
Relevancy 70.09%

hello, i was just wondering if i upgraded from a 300 watt to a higher one to get more power to my 8800 gts, if i would get a notice in increased performance? or would it be kind of minimal increase in frames? also would more ram increase fps? any tips?

Relevancy 70.09%

I want to get a card thats says it needs 300W when i only have a 240W in my pc. What am i looking at possibly going wrong here?

A:power supply?

The power supply, the card, your motherboard, your CPU, your hard drives and optical drives (DC/DVD) being damaged, exploded, or otherwise wrecked, in a descending possibility order as I listed them.

If you decide to not risk your computer, also notice that getting the cheapest 10$ so-called 300W power supply is not really going to prevent the damage mentioned earlier. Get a power supply from OCZ, Antec, Corsair, Seasonic or similar reputable companies.
Relevancy 70.09%

I have replaced a power supply in a 2000 box and now I can't get anything to show up on the monitor. The computer comes on but you can't see anything.

Relevancy 70.09%

I have a pretty generic brand psu, it's a 480w Echo Star. Well, I noticed my video card is starting to run pretty hot lately, but I installed this psu like 7 months ago. The hotness has been causing major artifacts in my games. All my fans work fine, but my vid card runs extremely hot. I have an ati radeon 9800pro 128mb, it's connected directly to my psu. Could the psu be causing this, or is it my vid card? My specs: amd athlon 2600+, 1 gig ram, radeon 9800 pro vid card.

Relevancy 70.09%

What brands should I go with?

A:Power Supply

Antec is always a good bet. Fotron is another good brand.
Seasonic is supposed to make nice PSU's. PC Power and Cooling if you have money to burn.
Relevancy 70.09%

I need to replace the PS for a HP Pavillion. What's in there now is a "Bestek" I've find several places with a web search that have them or replacements. Can't put a regular sized PS in, not enough room. Anybody have a favorite PS supplier?

Relevancy 70.09%


I have a compaq presario 6000. Recently the psu fan stopped running, it appears to seized.

I removed the psu from the case to check the fan...when I placed it back in the case and hooked everything up again, and turned it on the CPU fan does not run. I quickly turned it off again (less than 2 seconds) and am not sure what to do.

Any ideas?

Relevancy 70.09%

my pc won't power up - will try and start and then click and no power - question the power supply - has a atx powmax 400 -is there a way to tell if it is the power supply or what else could it be.

A:power supply - hw do I know

Yes, by using a power supply testor or by trying another power supply.
Relevancy 70.09%

I am thinking of getting antecs smartpower 2.0 500 watt power supply. I have read that it has removable connectors. Can you tell me if there is a problem with these? I thought I read somewhere that someone had trouble with a power supply that had removable connectors.

Relevancy 70.09%

Well here is the whole story I decided to upgrade my computer after a year or so of ownership with a new SATA hard drive and a second stick of memory I plugged my memory in no problem I believe I am changing from IDE to SATA so had to switch a jumper to enable my MOBO s SATA interfaces I first moved the wrong jumper and reset my CMOS no big deal I booted into windows had both sticks of memory seen and reset my clock Upon switching the sata jumper and plugging in the drive my computer would not boot not even a beep to tell me I am doing something wrong I backstep and unplug new drive and switch jumpers no good I take out new memory still nothing All I get is my fans turning on my drives turning on my keyboard s light flash once but no beeps at all I start removing pieces one at a time still nothing I take it all the way down to MOBO and power still nothing I break out my multimeter and test my ATX power Is my supply bad? power leads All of them look good cept my - V which reads - ish Is this the most likely cause to my problem Specs MOBO ASUS A N X deluxe PSU Turbolink Is my power supply bad? ATX- V MEM Corsair D CMX - C Processor AMD Athlon Graphics ASUS V Magic T Any help would be greatly appreciated Thanks in advance nbsp

A:Is my power supply bad?

The voltage tolerances are + or - 5% on the 12 volt line so 11.4v to 12.6v. You're almost at the lower end with no load. I'm sure a load would take you below the tolerance minimums.
Relevancy 70.09%

I just took out a power supply from my testing PC in which I plan to trash when I take apart all the components.

Should I open the power supply? Is it safe? I heard somewhere that it is not safe to open a power supply. I know what's inside though: Rectifier and transformer.

Steps down and up - transformer?
AC to DC - rectifier?

I took out my RAM as well. Should I trash this? No one is going to use 128MB of Synchronous ram. Everyone seems to use DDR.

A:Power Supply

open your power supply why would you do that? but i think it would be safe as long as you unplug it lol
Relevancy 70.09%

Im only getting an output of 3.2-3.23 on my 3.3rail. Im just wondering if thats something i should look into and what would happen if i leave it at that?

A:Power Supply 3.3

3.3V tolerance according to ATX standard is 5%, meaning the acceptable range is 3.135V to 3.465V. If you have problems, then it is because of bad/nonstandard devices, not a bad PSU.