Windows Support Forum

Solution for pendrive not visible problem

Q: Solution for pendrive not visible problem

HI There is a solution for Pendrive not detecting or usb drive not visible in My computer and device manager Recently I had a problem with Sandisk Cruzer Micro gb pendrive When I inserted the pen drive the system is detecting but it is not visible in Windoes explorer and device manager But it is working in other computers So it is not damaged or virus problem Solution for not visible pendrive infected If you Open Disk management there you will find your pendrive without any drive letter Here the problem is not with the pendrive it is with the system To resolve this Solution for pendrive not visible problem I tried in many ways and installed driver detecting softwares but there is no use Finally I succeeded in the following method The problem occured because unexpectedly the drive was un-mounted To solve you should have Administrator privilages on your local system Later go to Local security policy select Local policies in that select Audit policy and select Audit object access and check Success and apply From RUN type diskpart and right click on it and select Run as Administrator At the DISKPART prompt type automount press enter next type recover press enter next type rescan press enter and exit In Device manager under storage devices find your device not recognized and uninstall it Unplug the device and plug it again then the driver automatically installs and it is mounted to your computer You will get the autoplay window Thats it Solution for pendrive not visible problem nbsp

Relevancy 100%
Preferred Solution: Solution for pendrive not visible problem

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Solution for pendrive not visible problem

This is the only and unique one that was worked!!!n awsome!!
how did u found it???

http://www.techspot.com/community/topics/solution-for-pendrive-not-visible-problem.169381/
Relevancy 51.6%

I am using moserbaer pen drive (4GB) . When i plug it into my USB port, I get the icon of it in system tray but i could not see my pen drive icon in the explorer window.

Not only with pen drive even with the card reader the same problem( i could not see the contents of the memory card)
Please help me.
 

Relevancy 51.6%

sir,
i have a problem with my pendrive.
when i'm going to disk manag here it shows the unallocated space of my pendrive at that time what i do please help me.

A:problem with pendrive

Hi. . .

You can either create a partition and format giving you two partitons or re-format the pen drive in NTFS format. Right click on the area in the disk management box for options.

Regards. . .

jcgriff2

.

http://www.techsupportforum.com/forums/f217/problem-with-pendrive-287065.html
Relevancy 51.6%

Hello

Today, i bought myself a 512mb pendrive, i wanted to use it, windows recognized it as a removable drive without any problems, so i drag-n-dropped a file onto the drive window, but it froze at 30 percent

Ive tried rebooting but no change, the files were still freezing at 20-50 percent

Ive tried to disconnect, and then connect my pendrive, but this also didnt work

I went to a friend of mine to see if this is because of a badly manufactured pendrive, but at his place everything seems to work out ok

Now, im quite a newb to computers, so if you guys could hook me up with any solutions do this, id be very thankful

My system is winxp sp1
 

A:Pendrive problem

first i would say, get sp2 and all the updates, and you'r sure you have no bugs, i would try to copy one file using xp right click. can't get much in 512mb.but clean temps. defrag, run chkdisk, unplug it, restart, nothing else running, try again.
 

https://forums.techguy.org/threads/pendrive-problem.353489/
Relevancy 51.6%

I was having a problem with my windows laptop, I have a pendrive that I want to install Ubuntu with I already installed all the files to it but when I boot up the laptop it loads windows any help?
Also it is not a problem with the pendrive I tried it on another laptop and the installation booted properly

A:Pendrive Problem

Boot into Setup (Bios) and set the First Boot Device to be USB/Key

http://www.techsupportforum.com/forums/f10/pendrive-problem-583084.html
Relevancy 51.6%

i have a verbatim 2GB store n Go USB pendrive. the problem is i can't accsess my work as the USB slots both at college and on my laptlop won't read my USB pendrive.

hoe can i go about sorting this problem out as i need my work back ASAP
 

A:USB pendrive problem

hum; sad to say, it may all be lost. XP has not been kind to USB Flash drives.
The typical user error is to unplug the device without using the Safe To Remove
feature OR its brother right-click-->menu-->Eject

ALL USB Flash devices are formated FAT32 so you might try mounting it on
some other kind of system (Mac / Linux)
 

http://www.techspot.com/community/topics/usb-pendrive-problem.88937/
Relevancy 51.6%

i everyone,i bought a pendrive 4gb a week ago n now it isn't working.
'the disk needs to be formatted' apperars upon inserting it n 'windows cannot complete formatting' appears wen i try to format it. i cannot open or explore the pendrive. it also shows zero capacity. i'm using vista home premium, RAM: 4gb and HDD: 250 gb. plz help.
 

Relevancy 51.6%

my pendrive was working in a verry good conditin with good transfrer rate,but suddenly it is not getting detected ,but other pendrives are getting detected in my system.is there anything we can do about pendrive
 

A:pendrive problem

Have you tried it in another computer? If it doesn't work on multiple computers then its failed and simply needs to be replaced.
 

https://forums.techguy.org/threads/pendrive-problem.1075231/
Relevancy 51.17%

I`ve got a problem with Kingston 8Gb pendrive. I plug it in at home (Windows 7) and it works fine. When I plug it in at work (W7 as well), I cannot copy some files. From what I see it stucks at 1.5Gb and when I try to copy more files (regardless of file size) it says that the device is full. Any ideas?

A:kingston pendrive problem

Try to format it as NTFS and use it like that instead.

http://www.sevenforums.com/hardware-devices/42355-kingston-pendrive-problem.html
Relevancy 51.17%

hi there guys,, i have this pendrive that has my acer aspire one's recovery thing, that i made some time ago,,

i just wanted to know how i can reformat my pendrive, because i need the pendrive to transfer some files,, by the way my pendrive is an HP 2gb usb stick,, hope you can assist me,, thank you in advance,, (",).")
 

A:Solved: usb pendrive problem

Plug it into the computer then right click its icon > Format. Enter your desired format and options then press okay.
 

https://forums.techguy.org/threads/solved-usb-pendrive-problem.743852/
Relevancy 51.17%

How can I get my pendrive to it's previous state just by formatting or anything else.

Do I need to update my drivers after os installation for getting wifi worked ?
 

A:Pendrive and wifi problem

armahee said:





How can I get my pendrive to it's previous state just by formatting or anything else.Click to expand...

Not sure I follow you. When you format the USB drive it will be blanked.



armahee said:





Do I need to update my drivers after os installation for getting wifi worked ?Click to expand...

You will need to install the drivers for your Netbook after so the wifi will work, yes.
 

http://www.techspot.com/community/topics/pendrive-and-wifi-problem.213757/
Relevancy 51.17%

I Have Kingston 8Gb Usb 2.0 pendrive,for which actual capacity is 7.45 Gb.

I used my pendrive to record videocon D2H HD Recorder.STB formatted pendrive before used.Also no recordings are done.
But after inserting it in my laptop,windows is showing its capacity as 145Mb after initial formatting.Reformatting the drive dosent solved the issue.Can anyone please help?

A:Problem with Kingston 8GB Usb pendrive

Are you confident that you have a genuine 8gb unit, have you ever filled it with data ?
There are lots of fake/counterfeit units running around on ebay etc that are engineered to look like they have a larger capacity than they actually do

http://www.sevenforums.com/general-discussion/355857-problem-kingston-8gb-usb-pendrive.html
Relevancy 51.17%

Hello There,

I have a Toshiba Satellite L300-11F laptop, using XP Professional w/ SP3 on it.
It comes with 3 USB ports.
I have an older 1GB pendrive and just recently purchased a Maxell 16GB pendrive.
The pendrive works flawless at work, desktop pc but does not seem to work with the laptop.

I managed to use it only once, since then the laptop USB port simply does not recognize it.
I can tell it as the red led is not flashing and the pendrive can not be accessed.
I tried using the supplied Toshiba USB hub, no luck either

The 2 USB ports are ok as I use mouse, digital camera with it.
So is the 16GB pendrive, it works perfectly using other machines eg desktop pcs

Am I missing some USB drivers or whats the problem ?
Please help as I need to be able to use the unit on the laptop too.

Thank you!

blaze
 

https://forums.techguy.org/threads/16gb-pendrive-problem-on-xp.800394/
Relevancy 50.31%

Hello There,

I have a Toshiba Satellite L300-11F laptop. It comes with 3 USB ports.
I have an older 1GB pendrive and just recently purchased a Maxell 16GB pendrive.
The pendrive works flawless at work, desktop pc but does not seem to work with the laptop.

I managed to use it only once, since then the laptop USB port simply does not recognize it.
I can tell it as the red led is not flashing and the pendrive can not be accessed.
I tried using the supplied Toshiba USB hub, no luck either

The 2 USB ports are ok as I use mouse, digital camera with it.
So is the 16GB pendrive, it works perfectly using other machines eg desktop pcs

Am I missing some USB drivers or whats the problem ?
Please help as I need to be able to use the unit on the laptop too.

Thank you!

blaze
 

A:Maxell 16GB pendrive problem : HELP PLS !

I'm doubting its drivers but you said something I want a little more information on.

supplied Toshiba USB hubClick to expand...

Was this a powered Toshiba usb hub or unpowered?

If unpowered do you have access to a powered one?
 

https://forums.techguy.org/threads/maxell-16gb-pendrive-problem-help-pls.800393/
Relevancy 50.31%

hello tech guys

when i try to copy an ISO file(6.70GB) from PC to a pen drive (16GB) it says :The file is too large for the destination file system.I don't know what is this.please help me.
thank you.
 

Relevancy 50.31%

Hello there,

I'm having problems with my pendrive and windows7.

When I connect it, it is allright. I can read it, view all files, copy them from pendrive to HDD, delete them, etc.

The problem occurs when I try to write some file. Windows start to copy it but in the middle of the transfer it crashes and says me that my Pendrive is no longer connected. I have to disconnect my device and reconnect it to get it "work" again.

I read a lot of threads about this issue but I can't solved it. Please I need help.

I'm using Windows 7 RC Build 7100 on my HP TX2 1020us. I don't know what drivers could help.

Thanks in advance

A:Usb flash drive or pendrive problem

  
Quote: Originally Posted by VictorV


Hello there,

I'm having problems with my pendrive and windows7.

When I connect it, it is allright. I can read it, view all files, copy them from pendrive to HDD, delete them, etc.

The problem occurs when I try to write some file. Windows start to copy it but in the middle of the transfer it crashes and says me that my Pendrive is no longer connected. I have to disconnect my device and reconnect it to get it "work" again.

I read a lot of threads about this issue but I can't solved it. Please I need help.

I'm using Windows 7 RC Build 7100 on my HP TX2 1020us. I don't know what drivers could help.

Thanks in advance


Hi Victor,

Can you try it in another PC?

Try checking the drive for errors

Try formatting the Drive

I hope this helps

Pooch

http://www.sevenforums.com/hardware-devices/8315-usb-flash-drive-pendrive-problem.html
Relevancy 50.31%

Hi!
First of all my English is not perfect and I'm new here. The problem is with my friends notebook. Her laptop got infected probably from pendrive. She only has MBAM and sent me 2 screens what could it be. When she plugs other pendrive the only thing she can see is shortcut, and sometimes when she plug pendrive (not always) MBAM show info about virus/infection.

A:Problem with pendrive, Gamarue infection?

Hello and welcome to Bleeping Computer Win32/Gamarue is a worm that spreads via emails and flash drives. You will need an antivirus to detect it - Malwarebytes Anti-Malware is not meant to be used against worms.Due to the nature of this infection, I must warn you of the following...Looking through your logs I noticed that your machine is infected with a backdoor Trojan.They allows hackers to remotely control your computer, steal critical system information and download and execute files.If you do any banking or other financial transactions on the PC or if it should contain any other sensitive information, please change all your passwords on a known clean and secure machine, and it would be wise to contact those same financial institutions to apprise them of your situation.Though the trojan has been identified and can be removed, because of it's backdoor functionality, your PC is very likely compromised and there is no way to be sure your computer can ever again be trusted. Many experts in the security community believe that once infected with this type of trojan, the best course of action would be a reformat and reinstall of the OS. Please read these for more information:How Do I Handle Possible Identify Theft, Internet Fraud and CC Fraud?When Should I Format, How Should I ReinstallWe can still clean this machine but I can't guarantee that it will be 100% secure afterwards. Let me know what you decide to do.Regards,Alex

http://www.bleepingcomputer.com/forums/t/579132/problem-with-pendrive-gamarue-infection/
Relevancy 50.31%

HDD 1 tb Seagate hardisk not working,is not visible in the laptop, can b seen in device manager for 1min then gets disconnected automatically and the light on the hard disk starts blinking
 

A:HDD hardisk not working,not visible in the laptop,visible in device manager for 1min then disconnect

If the system worked before with this drive, I would say the drive is bad.
 

http://www.techspot.com/community/topics/hdd-hardisk-not-working-not-visible-in-the-laptop-visible-in-device-manager-for-1min-then-disconnect.198749/
Relevancy 49.45%

Hi,

I had a problem with my Windows 7 laptop. It starts when I trying copying some stuff from my netbook to the my Windows 7 laptop via pendrive. I cannot click directly because it shows:

F:\
Application not found.

The popup above didn't come if the pendrive doesn't have any stuff. Beside that, the files that copied from pendrive can be corrupted. I had formatted my pendrive many times but the issue still exist.

Please help.........

http://www.techsupportforum.com/forums/f217/problem-copying-files-from-external-drive-pendrive-679116.html
Relevancy 49.45%

Hi whenever i try to open my external hard disk n pendrive i get this error : Can not find script file "G:\autorun.vbs". But ONLY with my USB all my local drivers working perfect. I probably deleted the file with avg which detected it as a trojan. i need some help.... Any help appreciated!!!!
 

Relevancy 48.59%

I have a macro that populates my sheet with data it copies from a filtered search. It copies the search results from Column A, then Transposes it to each of the rows visible, before clearing the filters. My problem is that sometimes there is data already present in those cells, data from previous searches. I need to keep that data and paste the new data. Right now the macro pastes over the old data, I would like it it if it simply moved it or shifted it to the right.
 

https://forums.techguy.org/threads/vba-to-transpose-visible-cells-in-column-a-to-each-visible-row.1138315/
Relevancy 45.15%

Hi team,We got a big trouble while working on data in excel.We tried to copy a list of values that are straight not hide or unhide.And then paste to other sheet in same file in visible cells only by using command "=Sheet1!Cell reference" and then Ctrl+enter.It do copy only upto straight sequence like 1-8 and then 9th & 10th cell hide then 11th cell require value due to visible cells but it unable to do so.So the basic problem occur due to copy from a file which is straight and paste to other only in visible cells only in other sheet.But pasting wouldn't consider the visible cells and paste the number in hide cells also.Hope you understand my problem.Kindly provide the solution asap

A:Problem in pasting in visible cells only from other sheet

This is solution to problem.Just click Alt+F11 then click insert and then click moduleCopy below code :Sub CopyFilteredCells()
'Updateby20150203
Dim rng1 As Range
Dim rng2 As Range
Dim InputRng As Range
Dim OutRng As Range
xTitleId = "KutoolsforExcel"
Set InputRng = Application.Selection
Set InputRng = Application.InputBox("Copy Range :", xTitleId, _
InputRng.Address, Type:=8)
Set OutRng = Application.InputBox("Paste Range:", xTitleId, Type:=8)
For Each rng1 In InputRng
rng1.Copy
For Each rng2 In OutRng
If rng2.EntireRow.RowHeight > 0 Then
rng2.PasteSpecial
Set OutRng = rng2.Offset(1).Resize(OutRng.Rows.Count)
Exit For
End If
Next
Next
Application.CutCopyMode = False
End SubThen press F5 to run then it ask to copy range and then paste range.Just click on copy what you would like to copy and then click paste range where would like to paste either visible or notThanks team for further clarify the problem which helped me to find the above codes.

http://www.computing.net/answers/office/problem-in-pasting-in-visible-cells-only-from-other-sheet/20261.html
Relevancy 45.15%

On the welcome screen, when I click to logon into another user's account while an existing user's session is running, I just get bounced back to the welcome screen. And also my browser's look it's weird(menus not visible and history entries grayed out, as far as I can see), I notice the above behavior when my pc became infected with the "razespyware" thing which it has been cleaned already with ewido scanner, however I keep seeing that behaviour.

Pc details:
win xp home edition spanish version 2002
service pack 1
IE 6.0.2800.1106.xpsp2.050301-1526

hope you can help.
 

A:simultaneous logon problem and IE's menus not visible

bump
 

https://forums.techguy.org/threads/simultaneous-logon-problem-and-ies-menus-not-visible.422029/
Relevancy 42.14%

My Game IGI was working fine 2 weeks ago , but now when I start the game , choose a mission after that load screen arrives , after that load screen -- - I RECEIVE AN ERROR MESSAGE -->
IGI.exe hasa encountered a problem and needs to close.we are sorry for the inconvenie
Any solutions for this
 

https://forums.techguy.org/threads/igi-1-problem-do-anyone-have-solution-for-this.711351/
Relevancy 42.14%

Hi there Tnight (28th of febuary 2010) my dad found out his pc had a major virus on it and asked me to help try and fix it, i imediatly got onto my own pc and started to scower the internet for a solution and low and behold this forum popped up, i was relived that there was a soultion as myfather was at his wits end with what to do. i followed the steps involved in http://www.bleepingcomputer.com/forums/lof...hp/t275495.html and once i put it onto my dads pc the virus stated that the mbam program could not be opened as it was infected, i have since lost hope in my dads pc and have reccomended that he buy a new one, however he refuses to o that, please anyone who can help it would be greatly appreciated and i would love any kind of help atall.Very kind regards Jamie

A:Same Problem Different solution please

you could try this Did you download the setup file from the infected computer?If you did, download the file onto a usb drive from a different computer, then transfer it to the infected one and see if you can get it to run.If you tried that, I think you have to try renaming the setup file, to fool the malware into thinking it isn't MBAM.also i read this off another forum * Click on Start, click Run, and then type devmgmt.msc and click OK * On the View menu click on Show hidden devices * Browse to Non-Plug and Play Drivers and you should see something like TDSSserv.sys * Highlight that driver and right click on it and select DISABLE * Now RESTART your computer. * Download a copy of Malwarebytes but DO NOT run it yet. * Rename the downloaded installer file to any generic name such as your own name but keep the .EXE extension on the file and run it. * Once the program is installed go to the UPDATE tab and try to update the program if you can. * Then go to the SCANNER tab and run a Quick Scan and allow MBAM to fix anything found.hope this helps

http://www.bleepingcomputer.com/forums/t/299257/same-problem-different-solution-please/
Relevancy 42.14%

Hello I have an ongoing without new far... thus problem, a A solution problem A new problem, without a solution thus far... with my laptop details of laptop as per below On start up error messages are Cannot find inojegoz dll Cannot find radiac dll After clicking ok a new error message Javascript error - syntax error I downloaded a smartpc fixer program paid for it online It is A new problem, without a solution thus far... not able to connect The syntax error window appears with just about every new picture on a page Pretty frustrated Every search I have done for javascript errors has lead to yet another site asking for more money to download another program promising to fix it Anyone got any ideas thanks Rek Tech Support Guy System Info Utility version OS Version Microsoft Windows Home Premium Service Pack bit Processor AMD Athlon tm II Dual-Core M AMD Family Model Stepping Processor Count RAM Mb Graphics Card AMD M G with ATI Mobility Radeon Mb Hard Drives C Total - MB Free - MB Motherboard TOSHIBA NSWAE Antivirus Microsoft Security Essentials Updated and Enabled nbsp

A:A new problem, without a solution thus far...

Hi, my name is Mark and I will be helping you.

IMPORTANT: Please take the time to read this first.
For the benefit of others that are waiting for help please try to respond as fast as you can and make sure you read all of the instructions I will be giving you to follow. Time spent waiting for replies or having to repeat questions keeps other people waiting in the queue for help.

I am in Spain at GMT+1 hour, I check my emails several times a day so will usually reply to your responses within a few hours or less unless it is night time here. During the evening here I will usually reply within minutes. Please try to do the same for a swift clean up. Some Malware needs to be dealt with quickly or it will multiply and become deeply embedded in your system and more difficult to find and remove, so quick replies will have more than one benefit.

Keep in mind that I cannot see your PC, so please give as much detail as possible if something goes wrong or you receive any error messages.

Malware can be unpredictable and often time consuming to remove, on rare occasions something can go awry and your system may need to have Windows re-installed. Please make sure before we start that you have copies of all your important data saved to an external hard drive or CD/DVD's. Please make sure you disconnect any external hard drives and/or Flash drives during the clean up.

If you have run any scans that found an infection please let me know.

DO NOT run any scans or make any changes that I have not asked you to do as this can cause misleading results and make my job much harder in trying to help you. Please also uninstall any file sharing software i.e. uTorrent, BitTorrent, etc, if you insist on keeping it do not use it until we are finished. Use of file sharing software is one of the easiest ways to get your PC infected.

If I get no reply from you for two days I will mark the thread as Solved and move on to helping someone else. If you know you will be unable to reply for any length of time please let me know in advance.

Please don't abandon the thread as soon as your PC starts to work normally again as there will be other important checks to make to help protect your system from re-infection. It is also important to follow the correct procedure when removing the tools used to ensure all quarantined infections are completely removed and infected Restore Points are safely deleted.

Stick with me and we can quickly clean up your PC, if you cannot dedicate the time then a Reformat and Re-install will be your quickest option.

_____________________________________________________________________________________

Sorry you wasted some money on that program, but glad you have not tried any more.

The two file do not appear to be Microsoft files and most likely relate to a program you may have recently uninstalled, have you uninstalled anything recently.
Please go Here and follow the instructions to run DDS, then Copy and Paste both the logs into your next reply.
 

https://forums.techguy.org/threads/a-new-problem-without-a-solution-thus-far.1080165/
Relevancy 42.14%

Ok here's the problem: new mobo installed, everything seems to be working okay, went to install operating system, win xp pro and after loading the primary drivers i get the bsd that says there's a problem with pci.sys.

now i know that this is a common problem that's been addressed in this forum many times.
but i went out to the intel website and researched the error and someone posted this as a solution:

"My workaround was to go into the BIOS and disable the dual core function and then load the operating system. It worked. After getting the major Service Pack updates, I re-enabled the dual core function. All is well."

have any of you ever heard of doing this? should i try it?
 

A:possible new solution to old pci.sys problem

Can't hurt to try. There were numerous issues resolved in the SP updates for XP.
 

https://forums.techguy.org/threads/possible-new-solution-to-old-pci-sys-problem.1078269/
Relevancy 42.14%

hello everyone i have made another thread stating one of these problems just that was with my old hardware Now that ive pulled this pc from its hiding ive changed all a to need solution problem lag it s guts to a more slower solution just mainly the hard drive graphics card and power supply lt -- psu wouldnt be causing it anyway These are the factors that are DEFINETLY not causing it Not enough power need a solution to lag problem Overheating Old hardware issues ive tried the hdd graphics and psu all in different mobos and worked fine -not that a psu would do something to cause lag Windows or any OS Drivers if it ain t broke don t fix it even though i still do Hard Drive Graphics Card I ve had this problem for nearly a full year and when i take it to a shop they never get the problem It seems to only occur when I m doing something in additon to doing something else I E Winamp running and starting up Steam Client or MSN Messenger What bugs me the most is that its not a game lag this would be fine but more of a global lag affecting Windows GUI and gaming or mulltimedia and utility programs I don t think this happens in the BIOS or in DOS need a solution to lag problem but I know for a fact whatever windows i put on it will still lag even during installation process After a while thinking it could be the motherboard I have maybe come to the conclusion that it may be my actual CPU causing it I have a AMD Athlon XP but I m not so sure about this My mobo is a Gigabyte GA- VT N Pro Rev NForce i think Please help as fast as you can as I need this pc in tip-top shape by this weekend As I ve said it suffers from extreme lag in Windows when not doing anything and can also be heard by an audio lag as well as songs stutter so do videos and whatnot Thanks in advance Neo SYSTEM SPECS Gigabyte Nforce Pro mobo AMD Athlon XP IBM GB hDD x x MB DDR- RAM Sparkle GeForce MX MB Onboard sound LAN nbsp

A:need a solution to lag problem

How much space is left on the harddisk? A full disk will slow you down.
Is the file system FAT32 or NTFS?
When did you last do a full chkdsk and defrag?
Is DMA enabled? (check in the System/Device Manager, under IDE ATAPI Controller)
Your mobo might not support such fast RAM, try 512MB of either PC2100 or PC2700 (my best guess).

Your mobo does not exist, wrong type I guess.
 

http://www.techspot.com/community/topics/need-a-solution-to-lag-problem.24620/
Relevancy 42.14%

multimedia keyboard driver has stoped working
 

A:solution my problem

when i worked online the computer restart itsef and when i try to open some program i see message:application not found. after i restore program i see message : multimedia keyboard driver stoped working
 

https://forums.techguy.org/threads/solution-my-problem.910143/
Relevancy 42.14%

Ok here's the problem: new mobo installed, everything seems to be working okay, went to install operating system, win xp pro and after loading the primary drivers i get the bsd that says there's a problem with pci.sys.

now i know that this is a common problem that's been addressed in this forum many times.
but i went out to the intel website and researched the error and someone posted this as a solution:

"My workaround was to go into the BIOS and disable the dual core function and then load the operating system. It worked. After getting the major Service Pack updates, I re-enabled the dual core function. All is well."

have any of you ever heard of doing this? should i try it?

Relevancy 42.14%

Greetings all. I got a new HP Pavilion with windows 7 upgraded to professional. Three of the programs I use had to be replaced since they would not work on Windows 7. My windows 7 seems to be missing a number of files such as xp mode and the solution to a problem with loading Print Master 2012 platinum requires some folders that also appear to be missing... to fix the java.lang.reflect.InovationTargetExemption error, the trouble shooters recommended going into the users folder, click on the administrators folder, into the appdata file and then the local settings folder. I go into the administrator folder and I can't find the appsdata folder at all. CCleaner states that a number of links and some files appear to be missing. I sent word to the software trouble shooters but I need this problem solved immediately to get out a newsletter that is already late.

A:Problems with solution to Print Master solution

appsdata is a hidden system folder. Instructions on how to enable seeing hidden files is HERE

http://www.bleepingcomputer.com/forums/t/422090/problems-with-solution-to-print-master-solution/
Relevancy 41.71%

Dear Frenz,

Can anyone know, how to disable or remove Worm:W32/Downadup.gen.

i try few removal tools such as f-secure,dcleaner & ssclean. The worm is deleted. But after few minutes its back.

any idea frenz?

thansk for sharing.

A:Virus problem+need Solution

Hello and welcome to TSF.

We want all our members to perform the steps outlined in the link given below, before posting for assistance. There's a sticky at the top of this forum, and a
Quote:




Having problems with spyware and pop-ups? First Steps




link at the top of each page.

Please follow our pre-posting process outlined here:

http://www.techsupportforum.com/f50/...lp-305963.html

After running through all the steps, you shall have a proper set of logs. Please post them in a new topic, as this one shall be closed.

If you have trouble with one of the steps, simply move on to the next one, and make note of it in your reply.

Please note that the Virus/Trojan/Spyware Help forum is extremely busy, and it may take a while to receive a reply.

http://www.techsupportforum.com/forums/f100/virus-problem-need-solution-502692.html
Relevancy 41.71%

I have 3 computers, all connected by a D-Link DSL-504G router and it is supposed to have 3 green flashing lights in the places of 1.2 and 3 but now only 1 and 2 flash and the other computer says that it is connected to the internet but i can't sign on msn, yahoo or internet explorer, in network connections it says my computer is receiving and sending 0 packets, i have tried unplugging the router and putting it back on but with no luck, i have tried different cables but no luck and i reformatted my computer and still no luck so i beleive the problem has something to do with the computer, any information on the problem would be really helpful. please and thank you.
 

Relevancy 41.71%

I've found following solution in CNet Forums, applied and realized that my unworking WMP 11, surprisingly started to work as it used to be. I've copied the instruction as is.
"On Vista OS ...
Go into Command Prompt as administrator from your accessories folder, (right click Command Prompt <CLICK> "Run as Administrator").
<TYPE> regsvr32.exe wmp.dll
In a moment, a window will pop up & tell you that the Registry Server command was successful, (it may take about 10-15 seconds for the prompt).
Then simply open Windows Media Player from your shortcut & you're golden.
Have fun...Good Luck...
MrJinx68"

http://www.vistax64.com/general-discussion/182771-solution-wmp-11-problem-vista.html
Relevancy 41.71%

I got a notice that there were Windows XP updates that I had not installed. I downloaded them and installed them, now I have a continuous popup informing me that windows is no longer valid. That's odd as I have used this windows version on this lap top for many many years and have never had this issue.According to a Microsoft web page provided through the popup, the only solution is to purchase a new computer from or through Microsoft. The word "blackmail" comes to my mind when I get guidance like that. Is there a way to simply remove the popup and continue using my Win XP as I have been doing , up until I loaded the last of the 'official' windows updates?Any help would be appreciated.Thanks.message edited by sonoffar2

A:Solution to a new win popup problem??

Did you try to uninstall the update?True, XP support has ended so there may be some security risks. I confess that I still use it, along with 98SE, on older machines.Linux Mint, or another flavor, might be an option for you. The software is free and it is very XP like.

http://www.computing.net/answers/windows-xp/solution-to-a-new-win-popup-problem/203546.html
Relevancy 41.71%

hi for along time i was on this forum trying to figre out why my integrated camera bison cam nb pro kept crashing my msn everytime i selected it and i still don t know why but what i did stumble upon accidently was how to actually get it to work when i signed into msn i would turn on the cam so that the person i was talking to could see the webcam icon underneath my picture once it was there i asked them to send me a invite so they could viewing me on webcam at this point in time is when everything freezes and and the top of your msn window it says quot not responding quot don t end the program just click on the start button and click on hibernate or if you have the sleep function on your keyboard use that either way wait until everything has turned off and the light is flashing indicating the comp is in hibernation sleep mode solution to CAM !! BISON problem NB PRO then turn your computer back on and voila everything should start working your msn should start running normally and you can now use your bison cam NB pro like i said before i havn t got the foggiest why this works because i just stumbled upon it accidently but give it a try and if it works please leave a post on this thread letting others know if it works for you as well nbsp

A:solution to BISON CAM NB PRO problem !!

my cam and all works fine, but does anyone know where i can get some freeware that has a pic timer. i'd like to take some pics of myself for websites but it looks kinda stupid all of them with me leaning over to click 'tack picture'
i'm no slouch on searching but it's all screencap or streaming webcap. aaarrgh.
 

https://forums.techguy.org/threads/solution-to-bison-cam-nb-pro-problem.684420/
Relevancy 41.71%

I have been trying to run MEMTEST86 and have decide I do not know how to install it to a floppy. every time I run the disk on boot I get remove the disk and press a key to start over. what am I doing wrong?
 

A:Memtest86 problem need solution

Download Memtest floppy image: http://www.memtest.org/download/2.01/memtest86+-2.01.floppy.zip
Extract the zip file
Insert a blank floppy
Double click on Install.bat

Restart, confirm CMOS set to boot from Floppy
All done

From README.txt, inside the extracted zip "floppy" folder:




BIOS reporting floppy disk read errors. Either re-write or toss the floppy disk.Click to expand...

Also run Memtest for 7 Passes on your Ram (approx: 4Hrs)
Any faults what-so-ever, discard the Ram card and purchase new
.
 

http://www.techspot.com/community/topics/memtest86-problem-need-solution.108761/
Relevancy 41.71%

Hello,

Awhile back I was given instructions on how to change the folder standard green folders to new pink folders. Well, my computer crashed out and I had to get a new hard drive.

I tried to follow the instructions from the previously solved thread, but I can not find the "desktop.ini".

When I go to the users folder inside my choices are Administrator and Public and I can not find the "desktop.ini" file.

I have windows vista.

Thank You

A:New Problem with Previous Solution

Open up Windows Explorer and go to organize, folder and search options, then on the view tab clear the check mark for hiding system files.

http://www.vistax64.com/general-discussion/243142-new-problem-previous-solution.html
Relevancy 41.71%

I have a problem with Gameguard MMO protection from hacking I'm not hacking first of all For some reason the exe to the program closes and I believe it is gameguard's program that initiates it I have been looking for the problem solution so I've decided to post a HijackThis log If you guys have any other suggestions it would be extremely appreciated Logfile of Trend Micro a solution for Hijackthislog. problem Looking HijackThis v Scan saved at PM on Platform Windows XP SP WinNT MSIE Internet Explorer v SP Boot mode Normal Running processes C WINDOWS System smss exe C WINDOWS system csrss exe C WINDOWS system winlogon exe C WINDOWS system services exe C WINDOWS system lsass exe C WINDOWS system Ati evxx exe C WINDOWS system svchost exe C WINDOWS system svchost exe C WINDOWS System svchost exe C Hijackthislog. Looking for a problem solution WINDOWS system svchost exe C WINDOWS system svchost exe C WINDOWS system Ati evxx exe C WINDOWS Explorer EXE C WINDOWS system spoolsv exe C Program Files Common Files Apple Mobile Device Support bin AppleMobileDeviceService exe C Program Files Symantec LiveUpdate ALUSchedulerSvc exe C Program Files Bonjour mDNSResponder exe C WINDOWS eHome ehRecvr exe C WINDOWS eHome ehSched exe C Program Files Common Files LightScribe LSSrvc exe C Program Files Eset nod krn exe C WINDOWS system svchost exe C WINDOWS system svchost exe C Program Files Viewpoint Common ViewpointService exe C WINDOWS ehome mcrdsvc exe C Program Files Hewlett-Packard Shared hpqwmiex exe C WINDOWS system dllhost exe C WINDOWS system wbem wmiprvse exe C WINDOWS System alg exe C Program Files hpq HP Wireless Assistant HP Wireless Assistant exe C Program Files Hp HP Software Update HPWuSchd exe C PROGRA AIM AIMWDI EXE C Program Files Google Google Talk googletalk exe C Program Files FlashMute FlashMute exe C PROGRA hpq Shared HPQTOA EXE C Program Files Winamp winamp exe C Program Files AIM aim exe C Program Files Megaupload Mega Manager MegaManager exe C WINDOWS system notepad exe C Program Files Mozilla Firefox firefox exe C Documents and Settings thomas hayes My Documents My Downloads HiJackThis exe C WINDOWS system wbem wmiprvse exe R - HKCU Software Microsoft Internet Explorer Main Start Page http ie redirect hp com svs rdr TY lion amp pf laptop R - HKLM Software Microsoft Internet Explorer Main Default Page URL http ie redirect hp com svs rdr TY lion amp pf laptop R - HKCU Software Microsoft Windows CurrentVersion Internet Settings ProxyOverride local F - REG system ini UserInit C WINDOWS system userinit exe C WINDOWS system ntos exe O - BHO AcroIEHlprObj Class - E F-C D - D -B D- B D BE B - C Program Files Adobe Acrobat ActiveX AcroIEHelper dll O - BHO Megaupload Toolbar - E BD F- B D- E-CCB -B EEDBE C - C PROGRA MEGAUP MEGAUP DLL O - BHO no name - - F - D - - D F - C Program Files Spybot - Search amp Destroy SDHelper dll O - BHO SSVHelper Class - BB-D F - C-B EB-D DAF D D - C Program Files Java jre bin ssv dll O - BHO Google Toolbar Helper - AA ED - DD- d - -CF F - c program files google googletoolbar dll O - BHO Google Toolbar Notifier BHO - AF DE - D - -B FA-CE B AD D - C Program Files Google GoogleToolbarNotifier swg dll O - BHO MegaIEMn - bf e - a - fd -b - b e c - C Program Files Megaupload Mega Manager MegaIEMn dll O - Toolbar amp Google - C B - - d - B - A CD F - c program files google googletoolbar dll O - Toolbar Megaupload Toolbar - E BD F- B D- E-CCB -B EEDBE C - C PROGRA MEGAUP MEGAUP DLL O - HKLM Run WinampAgent C Program Files Winamp wianmpa exe O - HKLM Run nod kui quot C Program Files Eset nod kui exe quot WAITSERVICE O - HKLM Run hpWirelessAssistant C Program Files hpq HP Wireless Assistant HP Wireless Assistant exe O - HKLM Run HP Software Update C Program Files Hp HP Software Update HPWuSchd exe O - HKLM Run DeadAIM rundll exe quot C Program Files AIM DeadAIM ocm quot ExportedCheckODLs O - HKLM Run AIMWDInstallFilename C PROGRA AIM AIMWDI EXE O - HKLM RunOnce SpybotSnD quot C Program Files Spybot - Search a... Read more

http://www.techsupportforum.com/forums/f284/hijackthislog-looking-for-a-problem-solution-209273.html
Relevancy 41.71%

i have big problem
pic here :click here

A:problem windows 7 I need solution

? Do not click the link. Unsafe site. FE Notified.

http://www.pcadvisor.co.uk/forum/windows-29/problem-windows-7-i-need-solution-4598766/
Relevancy 41.71%

Hmmm the best way to describe it My desktop this problem? solution Have the to missed I running w is wired into my router I have an inventel livebox Internet suddenly drops out on my desktop I check my phone nope wireless internet still connects and browses fine After a few minutes a yellow Have I missed the solution to this problem? triangle appears on the network symbol I go to my browser and try to connect to my router invalid web page wtf I run the fixing troubleshooting thing - problem not found I restart my router it then connects again So this is definitely a windows problem as it causes my computer to just forget to go online yet restarting the router seems to be the only fix It is incredibly frustrating when it happens while in the middle of an online game I cant be the only one experiencing this so there has to be a fix that no-one has told me about My power settings are telling my lan to never sleep as well as everything else for good measure Any help Thanks

A:Have I missed the solution to this problem?

Ok it just happened again while i was in the middle of a game.

First:

[img] http://i177.photobucket.com/albums/w...3/Capture1.png [/img]

So i log into my router and get this:

[img] http://i177.photobucket.com/albums/w...3/Capture2.png [/img]

When i click the yellow triangle i get this:

[img] http://i177.photobucket.com/albums/w...3/Capture3.png [/img]

My network map:

[img] http://i177.photobucket.com/albums/w...3/Capture4.png [/img]

I run the diagnostics and this is the outcome:

[img] http://i177.photobucket.com/albums/w...3/Capture5.png [/img]



Leaving the only way to work around it is to disconnect my router. Everything else hooks up to the internet fine. This W7 machine is the only problem.

Any ideas?.... anyone?


Does anyone have a clue why it just randomly shuts me off or any idea how to prevent this from happening?

http://www.sevenforums.com/network-sharing/73748-have-i-missed-solution-problem.html
Relevancy 41.71%

gadmei utv332 e have no sound on win 8...i'm also in the same problem. plz give me a solution...i'm also in the same problem. plz give me a solution...

A:i'm also in the same problem. plz give me a solution...

gadmei utv332e no sound windows 8 http://is.gd/yYGlAb

http://www.computing.net/answers/windows-8/im-also-in-the-same-problem-plz-give-me-a-solution/1616.html
Relevancy 41.71%

how can i solve svchost problem in my pc iam using xp 2003 edition

A:wat s the solution for svchost problem

Can you describe the trouble that you have in a little more detail.
You gave no info that could help.
What type of system?
What makes you think its the svchost?
any error logs?
anything?

http://www.techsupportforum.com/forums/f10/wat-s-the-solution-for-svchost-problem-404982.html
Relevancy 41.71%

I have a Gateway machine running NT Server, yesterday when I turned it on, It said "Load Error" Press a key to reboot..." That is the exact message, I pressed a key the same message came up again, then I put in the Server disk, it repaired "so-called" a bunch of .dll files and then robooted itself but the same problem!!!! HELP this machine runs my Help Desk Software!!!!!
 

A:NT PROBLEM...LOOKED EVERYWHERE FOR SOLUTION!!!

Do you have an NT Boot Disk? If not, you're going to need to get one (create it on another machine) so you can get your computer booted to troubleshoot the problem.
 

https://forums.techguy.org/threads/nt-problem-looked-everywhere-for-solution.48545/
Relevancy 41.71%

hello,
i received pictures in my e.mail and i can't open and see them.
the computer writes:"insert disc of solution center and click ok.
tell me what to do,if i have to download any program?
help me please.
the pictures were sent from France

A:problem with solution center

what format are the pictures sent to you in...? is it a Winzip file ? are they Jpeg files, or TIF files or bitmap files or??? why can you not right click on the attachment and select save attachment to desktop?? what email program are u using?

http://www.techsupportforum.com/forums/f10/problem-with-solution-center-405204.html
Relevancy 41.71%

Hello everyone Black-out problem solution? a - Is there I ve had my computer Black-out problem - Is there a solution? for around years now and I ve been experiencing a very annoying problem through those years Now Black-out problem - Is there a solution? I ve decided to finally try and get some proper help You ll get my computer specs Black-out problem - Is there a solution? first Pentium HT Northwood GHz ATI Radeon Pro mb x mb Kingston Valueram PC W PSU Windows XP Home Edition SP fully updated The problem is that my computer irregularly goes black after an uncertain amount of playing time It happens in any newer full-screen game World of Warcraft Warcraft Counter-strike rarely - my monitor goes black the monitor power symbol starts flashing as if it had no signal my sound stops playing BUT my fans are still running and the light on quot num lock quot is still on To start the computer again I have to turn the power off and on again as nothing else responds Sometimes I can play for hours without experiencing the problem - it s happening irregularly I don t think it can be the drivers as I ve been formating my computer several times through the past years and I ve always downloaded the newest ATI driver and still had the problem I can say already that my temperatures are a bit high I m running with only one side on my case or else the CPU-temp goes beyond celcius degrees Right now it s max celcius degrees which I know is too high but would the CPU-temp cause a black-out It goes black with or without both sides on my cabinet I ve run the quot Windows Memory Diagnostic Tool quot under boot for minutes which didn t give any errors My computer should be spyware and virus free as I ve run full-scan with several anti virus and spyware scanners just to make sure I am very frustrated that I can t find a proper solution and I wouldn t like to spend a fortune on making it work again I really hope you can help me fix the problem Thanks in advance nbsp

A:Black-out problem - Is there a solution?

Definetly Overheating.

Try going into the bios and go to the fan control configuration and turn of CPU fan control, or smart fan control or whatever so that you let your CPU fan run at full speed constantly.

Download and run CPU-Z (google it). Check for the current voltage running on the cpu screen. If it looks like the voltage is high (aka overvoltage), them there is a problem with your motherboard. It could also be the PSU. Try to fix this problem by going into the BIOS and setting it to default settings agian. If it still overvolts by itself, then there is a problem with your motherboard. Download and flash your BIOS to the latest version and see if it corrects the problem.

Is your pc running at 65C while doing nothing, no programs or apps running? If it is, then that is VERY VERY bad. If you built your pc yourself, then reinstall the heatsink and re-apply thermal paste.

If your PC has none or insufficient case fans, your CPU will obviously overheat since it's a northwood. You need at least a fan to pump cool air into the case, and a fan to pump air out of the case.

It's all about the airflow, the faster the air is moving through the case, the cooler the heatsink will be. Taking off the cover will not help much, as ambient air is still not moving across the heatsink, your heatsink fan will just pump more hot air onto the heatsink making it really hot. Install case fan if you have not already.

Google on how to take off your heatsink, how to re-apply thermal paste, and how to install it agian.

If you still have problems, start troubleshooting your video card. test your Video card to see if it's overheating. Do a video card swap with a different one and see if the problem persist.

If that dont work, start looking at the Northbridge heatsink. If it's hot enough to cause considerable pain, consider looking for a aftermarket Northbridge heatsink for better cooling.

If you still have problems, consider looking at problems with your PSU. Do a PSU swap.

Then if you still have problems, try a Memory swap with seperate new RAM.
 

http://www.techspot.com/community/topics/black-out-problem-is-there-a-solution.59725/
Relevancy 41.71%

out of no where this popped up out of no where Desktop Window Manager Problem Stopped working Files that help describe the problem AppCompat txt WERInternalMetadata xml minidump mdmp WERDataCollectionFailure txt View a temporary problem solution Windows copy of these files Warning If a virus or other security threat caused the problem opening a copy of the files could harm your computer AsusSetup exe Problem Program Windows problem solution compatibility problem Files that help describe the problem appcompat txt View a temporary Windows problem solution copy of these files Warning If a virus or other security threat caused the problem opening a copy of the files could harm your computer There Client Program Problem Program Compatibility Files that help describe the problem appcompat txt Tab FD tmp View a temporary copy of these files Warning If a virus or other security threat caused the problem opening a copy of the files could harm your computer Local Security Authority Process Problem Stopped working Files that help describe the problem AppCompat txt WERInternalMetadata xml minidump mdmp View a temporary copy of these files Warning If a virus or other security threat caused the problem opening a copy of the files could harm your computer DHCP Client Problem Stopped working Files that help describe the problem AppCompat txt WERInternalMetadata xml minidump mdmp View a temporary copy of these files Warning If a virus or other security threat caused the problem opening a copy of the files could harm your computer Diagnostic Policy Service Problem Stopped working Files that help describe the problem AppCompat txt WERInternalMetadata xml minidump mdmp View a temporary copy of these files Warning If a virus or other security threat caused the problem opening a copy of the files could harm your computer Network Location Awareness Problem Stopped working Files that help describe the problem AppCompat txt WERInternalMetadata xml minidump mdmp View a temporary copy of these files Warning If a virus or other security threat caused the problem opening a copy of the files could harm your computer Network Store Interface Service Problem Stopped working Files that help describe the problem AppCompat txt WERInternalMetadata xml minidump mdmp View a temporary copy of these files Warning If a virus or other security threat caused the problem opening a copy of the files could harm your computer RPC Endpoint Mapper Problem Stopped working Files that help describe the problem AppCompat txt WERInternalMetadata xml memory hdmp View a temporary copy of these files Warning If a virus or other security threat caused the problem opening a copy of the files could harm your computer Windows Memory Diagnostic Problem Memory test results reported Files that help describe the problem MemDiag bin View a temporary copy of these files Warning If a virus or other security threat caused the problem opening a copy of the files could harm your computer Windows Problem Video hardware error Files that help describe the problem WD- - dmp sysdata xml WERInternalMetadata xml View a temporary copy of these files Warning If a virus or other security threat caused the problem opening a copy of the files could harm your computer Windows Problem Video hardware error Files that help describe the problem WD- - dmp sysdata xml WERInternalMetadata xml View a temporary copy of these files Warning If a virus or other security threat caused the problem opening a copy of the files could harm your computer Windows Problem Video hardware error Files that help describe the problem WD- - dmp sysdata xml WERInternalMetadata xml View a temporary copy of these files Warning If a virus or other security threat caused the problem opening a copy of the files could harm your computer where did all these come from

A:Windows problem solution

of course when i try to send the information it never works....

http://www.sevenforums.com/performance-maintenance/52638-windows-problem-solution.html
Relevancy 41.71%

I tend to believe it is nothing serious since trouble began when I unplugged the dell inspiron desktop to move it to another desk in the SAME ROOM nbsp So I plug everything in and no sound nbsp Ok simple I have something plugged in wrong nbsp I have tried every possible usb port and speaker pin to every opening as tried solution about going someone knows I out will -- just the everything problem, bet on have sound here well nbsp No luck nbsp Got some ms phone techs on it who connected to my pc and they could not find anything tried uninstalling and reinstalling drivers nbsp Even bought some dell speakers nbsp NOTHING nbsp There is a clue nbsp whenever I shut the system down I hear a crackle noise from the speaker - both old and new nbsp Same when I on going sound problem, have tried just about everything -- I will bet someone out here knows the solution turn it on nbsp So some sound is alive on going sound problem, have tried just about everything -- I will bet someone out here knows the solution Called an expensive pc support dude who told me it could be the MOTHERBOARD nbsp I don t think so nbsp Can anyone give me their thoughts nbsp thanks nbsp Mary still a big fan of DELL

http://en.community.dell.com/support-forums/desktop/f/3513/t/19987310
Relevancy 41.71%

after a while in safe mode trying to discover why my monitor was flashing
looking around video drivers and stuff

i restart to go normal
and i get BSOD nv4_disp

:O

i;ve looked thru forums with no recent solution (all are prior 2006)

so i;m looking for a new solution to old problem..

any help guys?

p.s. is taking a problem to geek squad ever worth it?
 

A:Old Problem New Solution? nv4_disp

Hello!
Fristly what you have to do is:

- Load optimized defaults in your BIOS and do not modify memory settings
- set your memory settings in the BIOS less aggressively and test
- make sure you have an adequate power supply
- update your BIOS and test
- disable or enable AGP fast write and test (this has worked for some people) worked for me! ^^

Then install this patch:

www.synapse.gr/downloads/nv4loopfix.zip

What does it do? It closes the RX55 memory register in BIOS. The RX55 register's official name and function is Memory Write Queue (MWQ) timer. The MWQ timer is actually a timing device included in the memory host controller to prevent write data being held in the memory queue too long. After the data has been in the queue too long it times out. This timed out data is then given a higher write request priority. Now that might sound nice &#8211; a bit of extra performance BUT the procedure fails when overloaded. 3D games and Win XP put too much load on the memory queuing timer procedure. The nVidia new driver exaggerates the problem even more as the driver enables nVidia cards to use even more memory than previous driver versions.

So in a nutshell it&#8217;s a memory timing problem that only happens when the RX55 register is opened. Some motherboard manufacturers have already released new BIOS that have the register closed. In other instances, this patch is needed.
Run a 3d game like cod2/bf2 etc for 2-5s and it should work smoothly. The patch does really work.
If you get freezes for like 2-3s dont worry about it since it will go away eventually..but a rare problem.

If those steps have not worked, then there's something wrong with your card.. talk to your manufacturer and hopefully u can claim for warranty.

( I've found this solution here: http://www.ngohq.com/graphic-cards/6718-nv4_disp-bsod-error-fix.html)
 

https://forums.techguy.org/threads/old-problem-new-solution-nv4_disp.841095/
Relevancy 41.71%

Who can help me? when i playing a game or sometimes my internet is not responding.. i get Windows Solution problem, and my program closes

I installed windows 7 again, updated
I updated my videocard.

Who knows whats wrong?



Problem signature:
Problem Event Name: APPCRASH
Application Name: TmForever.exe
Application Version: 0.0.0.0
Application Timestamp: 4b9e9148
Fault Module Name: POWRPROF.dll
Fault Module Version: 6.1.7600.16385
Fault Module Timestamp: 4a5bdb0c
Exception Code: c0000005
Exception Offset: 00014619
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 1033
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e789
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt



Please help me

A:Windows Solution problem

  
Quote: Originally Posted by [COLOR=royalblue


jaferrari[/COLOR];691963]Who can help me? when i playing a game or sometimes my internet is not responding.. i get Windows Solution problem, and my program closes

I installed windows 7 again, updated
I updated my videocard.

Who knows whats wrong?



Problem signature:
Problem Event Name: APPCRASH
Application Name: TmForever.exe
Application Version: 0.0.0.0
Application Timestamp: 4b9e9148
Fault Module Name: POWRPROF.dll
Fault Module Version: 6.1.7600.16385
Fault Module Timestamp: 4a5bdb0c
Exception Code: c0000005
Exception Offset: 00014619
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 1033
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e789
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt



Please help me


Hello jaferrari & welcome,
The info you provided above may indicate you are having problems with a game that you play................ It may be wise to uninstall it to see if your problem goes away.

If your problem remains please provide the following information -
1. How Windows 7 was installed? Was it an upgrade installation or a clean installation?

2. Please provide red error messages in the Event Log for more information:
a. Click "Start", input "eventvwr" (without quotation marks) in the Start Search bar and press Enter.
b. Go to Windows Logs - Application - note red errors.

3.Your system specs need to be filled in.
Go to User Control Panel [CP] - Your Control Panel - Your Profile - Edit System
Specs.

4. What Anti Virus & firewall are you using?

Let us know how you go.

http://www.sevenforums.com/bsod-help-support/79215-windows-solution-problem.html
Relevancy 41.71%

i have booting problem that i can't boot from windows cd Because when i Because I am running a device does not boot, but booting from hard disk ,Even when you choose from a list containing the :
1-boot from HD
2-boot from CD
3-booy from LAN
Whatever i choose from these options, it will boot from HD.

Are there ideas please ?

A:Hi, I want a solution to the problem of Booting,please

I am not certain what you are saying, but for clarity, go to the bios setup menu (Boot Area) and when in there, set your boot order to:

CDRom/DVD - 1st on the list
Floppy - 2nd on the list (if any)
Hard Drive - 3rd on your list

Then, make sure your Hard Drive Priority has the boot drive listed first if you want to add the OS disk to the rig.

Don't forget to save before you exit.

Then, put your CD Disk in there and boot up and it should find the CD or DVD depending upon what you have.

http://www.techsupportforum.com/forums/f10/hi-i-want-a-solution-to-the-problem-of-booting-please-481007.html
Relevancy 41.71%

The GF Aniso problem has anyone thought of this Seeing that the GF doesn t have the multitexturing bug that bug The problem: solution? GF4 possible Aniso the GF does The GF4 Aniso bug problem: possible solution? when doing anisotropic filtering in Direct D has ANYONE tried installing a GF quot manually quot as a GF It might be hell getting it to work hell it might be hell getting it to load windows but if one of you clever people could get it to render D without it locking up perhaps you could see if Anisotropic filtering works properly it doesn t cut your multitexturing fillrate in half basically disabling multitexturing completely with the GF using it as a GF The fillrate of single texturing and multitexturing is exactly the same with aniso enabled So the card isn t multitexturing at all which cuts your fillrate in half Now trying to install a GF as a GF might not even be halfway possible with XP but I could see some hacking going on with SE It might require the xx drivers for it to work though The only reason to do this is just to see if multitexturing works with d d aniso enabled IF you can even get video Anyone brave enough to try nbsp

A:The GF4 Aniso bug problem: possible solution?

Yikes, I wasn't clear at all in the original message. That's what I get for typing stuff when I'm half sleep.....

Anisotropic filtering works on the GF4, and looks great. But multitexturing is disabled when using it ! In other words, the fill rate is literally cut in half !

The 2nd TMU is apparently not even being used (or the fillrate for both are cut in half). You can test this easily by using 3dmark fillrate test with aniso of 2 or higher enabled. Your single texturing and multitexturing scores will be exactly the same.....the same as single texturing.

A Geforce3 with aniso enabled will **BEAT** you in the multitexturing test.....meaniing, it is _faster_ than the GF4's.
 

http://www.techspot.com/community/topics/the-gf4-aniso-bug-problem-possible-solution.1447/
Relevancy 41.71%

These 2 pop-ups keep showing up.

One is spybot, and I always click no to it.
And the other I reject as well.
How do I get rid of these?
 

A:Most likely a very simple solution to problem: 2 pop ups. HELP! please

https://forums.techguy.org/threads/most-likely-a-very-simple-solution-to-problem-2-pop-ups-help-please.667777/
Relevancy 41.71%

Periodically I try to install and a program and receive a msg saying"The procedure entry point setupapi.CM_Set_HW_Prof_FlagsA could not be located in the dynamic link library CFGMGR32.dll".I have tried to repair XP and such,but have had no luck finding a solution.It seems almost certain that at some point I improperly uninstalled something,but I have no idea how to repair the problem and can not find a solution googling.Any assistance would be greatly appreciated.

A:I have a dll problem could someone please suggest a solution

What program are u installing?
-blitze

http://www.techsupportforum.com/forums/f10/i-have-a-dll-problem-could-someone-please-suggest-a-solution-71028.html
Relevancy 41.71%

hello,
my name is fawad. i have dell gx520 ,2.8ghz processor with 2gb ram and 250gb h.d.,sir from last one week i have been facing a problem as i operates my computer it hangs after some time ,some times it happens after just 2 or 3 min and some time after many hours and sometimes it don't happen ,i have changed my ram and installed a new one in my pc, as i was thinking that it was my ram problem ,but it still hanging ,and moreover i don't have any type any type of electricity voltage problem in my house,because some of my friends are saying that my system is hanging due to electricity voltage ups and downs.plz i want a solution from u guys help me i came here with someone reference ,i hope u guys can solve my problem
thank you
 

Relevancy 41.28%

My OS is Vista Home Premium 32 bit. I recently installed the most recent version of HP Solution Center for my all-in-one Officejet Pro L7680. HP Solution Center opens and gives me my options for scanning. I choose to scan a document to PDF and it tells me it will be put in to the MY SCANS folder in my Documents, but when I got to my Documents, nothing is there...no scan...no PDF. I've tried it about five times and can't figure out what the problem is. Any suggestions?? Thanks.

A:HP Solution Center - Scanning problem

Hi,

Have you looked in: -
My Documents

Documents

for the "My Scans" folder?

http://www.vistax64.com/drivers/284201-hp-solution-center-scanning-problem.html
Relevancy 41.28%

For those people getting the error 'Setup could not be completed because an error occurred' error (such as MacDrive 7.2 error on Vista Ultimate x64, please help...), the solution is to extract the MSI from the file, and run it via the command line (msiexec.exe /i filename.msi)

http://www.vistax64.com/software/288082-macdrive-8-problem-installing-solution.html
Relevancy 41.28%

I was unable to join a Homegroup on my netbook and found no help anywhere but stumbled on a solution on solution problem join Can't - homegroup and my own Here is what fixed my homegroup problem Go to Control Panel and click on Adminstrative Tools Scroll down and click on Services Scroll down and right click on Homegroup Provider Service Click on Start the Service If got this Can't join homegroup - problem and solution messsage Windows could not start Homegroup Provider Service on Local Computer Error The account specified for this service is different from the account specificied for other services running the same process Here Can't join homegroup - problem and solution is what I did next Cancel error message and right click on Homegroup Provider Service again Scroll down and click on Properties Click on Logon tab Click on This Account button Click on Browse Click on Advanced Click on Find Now Double Click on Local Service Click on OK Local Service then appears in a box on the Logon tab Beneath it are two boxes with rows of asterixes Delete all of the asterixes then click on Apply then click on OK Right click on Homegroup Provider Service Click on Start Homegroup Provider Service then started and I was able to join a homegroup

A:Can't join homegroup - problem and solution

Thanks for sharing your fix with everyone

http://www.sevenforums.com/network-sharing/235471-cant-join-homegroup-problem-solution.html
Relevancy 41.28%

when i log on to my computer it takes a while to go to the desktop after the ''loading your personal settings'' page. and when it takes me there an errror message pops up saying [I]''cannot find the file named IBM XXXXX and please search again typing correctly.......................'' this window pops up everytime i log in and its annoying as it takes some time to log in...i tried resoting system but nothing worked.

pls help me with this matter....thank you very much....

A:startup problem!!! solution needed...

Hi and Welcome to TSF

You have a program loading at startup that is giving you issues.
Open the System Congfiuration Utility and see whats running at startup.

You may also want to try this tool....
StartupList :
A simple tool that lists all and every auto starting program on your system. You might be surprised what it finds, this is way better than Msconfig. Commonly used to troubleshoot malfunctioning systems, trojan/viral infections, new spyware/malware breed and the likes.

Download HERE

http://www.techsupportforum.com/forums/f10/startup-problem-solution-needed-116828.html
Relevancy 41.28%

http://www.techsupportforum.com/secu...er-help-2.html

Referring to the above post, it is applicable to all the users or the only the asker in that post. I have the same problem in PC. Please guide

A:Already discussed problem and solution, is it relevant for me?

This is my dss log, main.txt contents and attached in this post are the contents of extra.txt

Deckard's System Scanner v20071014.68
Run by Shaad on 2008-06-12 16:15:55
Computer is in Normal Mode.
--------------------------------------------------------------------------------

-- System Restore --------------------------------------------------------------

Successfully created a Deckard's System Scanner Restore Point.


-- Last 3 Restore Point(s) --
3: 2008-06-12 10:46:00 UTC - RP3 - Deckard's System Scanner Restore Point
2: 2008-06-12 10:19:15 UTC - RP2 - ComboFix created restore point
1: 2008-06-12 10:01:58 UTC - RP1 - System Checkpoint


Backed up registry hives.
Performed disk cleanup.



-- HijackThis Clone ------------------------------------------------------------


Emulating logfile of Trend Micro HijackThis v2.0.2
Scan saved at 2008-06-12 16:18:33
Platform: Windows XP Service Pack 2 (5.01.2600)
MSIE: Internet Explorer (7.00.6000.16640)
Boot mode: Normal

Running processes:
C:\WINDOWS\system32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\system32\wscript.exe
C:\WINDOWS\explorer.exe
C:\Program Files\ESET\ESET NOD32 Antivirus\ekrn.exe
C:\WINDOWS\system32\dxdlg.exe
C:\Program Files\ESET\ESET NOD32 Antivirus\egui.exe
C:\WINDOWS\system32\rundll32.exe
C:\WINDOWS\system32\rundll32.exe
C:\Program Files\Sify Broadband\BBImpSec.exe
C:\WINDOWS\system32\wscntfy.exe
C:\Program Files\Mozilla Firefox\firefox.exe
C:\WINDOWS\system32\notepad.exe
C:\WINDOWS\system32\notepad.exe
C:\Documents and Settings\Shaad\Desktop\dss.exe

R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Search Bar = http://us.rd.yahoo.com/customize/ie/...ch/search.html
R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Search Page = http://us.rd.yahoo.com/customize/ie/.../www.yahoo.com
R0 - HKCU\Software\Microsoft\Internet Explorer\Main,Start Page = http://www.yahoo.com/
R1 - HKCU\Software\Microsoft\Internet Explorer\SearchURL,(Default) = http://us.rd.yahoo.com/customize/ie/.../www.yahoo.com
R1 - HKCU\Software\Microsoft\Internet Connection Wizard,ShellNext = http://www.champion.sify.com/bbhome/...9dd0ac7a9bc46f
R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Default_Page_URL = http://www.yahoo.com/
R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Default_Search_URL = http://us.rd.yahoo.com/customize/ie/.../www.yahoo.com
R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Search Bar = http://us.rd.yahoo.com/customize/ie/...ch/search.html
R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Search Page = http://us.rd.yahoo.com/customize/ie/.../www.yahoo.com
R0 - HKLM\Software\Microsoft\Internet Explorer\Main,Start Page = http://www.yahoo.com/
F0 - system.ini: Shell=explorer.exe wproxp.exe
F2 - REG:system.ini: Shell=explorer.exe wproxp.exe
F2 - REG:system.ini: UserInit=C:\WINDOWS\system32\userinit.exe,C:\WINDOWS\system32\wscript.exe C:\WINDOWS\system32\boot.vbs
O1 - Hosts: 203.27.235.25 www.payseal.icicibank.com
O1 - Hosts: 210.210.19.82 www.sifymall.com
O2 - BHO: (no name) - {02478D38-C3F9-4efb-9B51-7695ECA05670} - (no file)
O2 - BHO: (no name) - {166BCB27-FCFD-4588-9BDB-44FC6A02EF35} - C:\WINDOWS\system32\yayaxvSM.dll
O2 - BHO: RealPlayer Download and Record Plugin for Internet Explorer - {3049C3E9-B461-4BC5-8870-4C09146192CA} - C:\Program Files\Real\RealPlayer\rpbrowserrecordplugin.dll
O2 - BHO: (no name) - {31FF080D-12A3-439A-A2EF-4BA95A3148E8} - (no file)
O2 - BHO: BitComet ClickCapture - {39F7E362-828A-4B5A-BCAF-5B79BFDFEA60} - C:\Program Files\BitComet\tools\BitCometBHO_1.1.3.19.dll
O2 - BHO: (no name) - {71CE2E05-9982-44DD-B2AF-E02E8CCED73B} - C:\WINDOWS\system32\urqRKEUk.dll (file missing)
O2 - BHO: {86958283-dc84-9298-81a4-977639c9d127} - {721d9c93-6779-4a18-8929-48cd38285968} - C:\WINDOWS\system32\hvvvctap.d... Read more

http://www.techsupportforum.com/forums/f284/already-discussed-problem-and-solution-is-it-relevant-for-me-258772.html
Relevancy 41.28%

Hello friends.. any solution for my problem? I face with BSOD problem.My dell laptop crash repeteadly even I,ve tried so many solution to overcome this BSOD problem n even it is still a new laptop.

-when I check the caused of the problem using bluescreen view software,its show that it is caused by tcpip.sys.Please help me.I've not install any software to be the cause of this problem,it is just happen this week without any reason.Please help me..
I also attach the crash file from minidump folder..Thanx a lot..=)

A:BSOD Problem.Any effective solution?Please help me.

Welcome to SF!

The most straightforward reading of your dmp looks like your network adapter drivers are causing the issue. I suggest uninstalling them completely in Device Manager, and installing a fresh copy. If you can find an updated version on the computer manufacturer's site, use it.

I also suggest removing Kaspersky completely in Programs and Features, and then running its removal tool: http://support.kaspersky.com/downloa...vremover10.zip

Then download and install Microsoft Security Essentials.


Code:
Microsoft (R) Windows Debugger Version 6.11.0001.404 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\Jonathan\Desktop\050210-18345-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (2 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7600.16539.amd64fre.win7_gdr.100226-1909
Machine Name:
Kernel base = 0xfffff800`03203000 PsLoadedModuleList = 0xfffff800`03440e50
Debug session time: Sun May 2 02:04:23.648 2010 (GMT-4)
System Uptime: 0 days 4:55:31.365
Loading Kernel Symbols
...............................................................
................................................................
.........................................
Loading User Symbols
Loading unloaded module list
......
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1E, {ffffffffc0000005, fffff8000327c275, 0, ffffffffffffffff}

Unable to load image \SystemRoot\system32\DRIVERS\kl1.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for kl1.sys
*** ERROR: Module load completed but symbols could not be loaded for kl1.sys
Probably caused by : tdx.sys ( tdx!DbgTdxReferenceTransportAddress+2f )

Followup: MachineOwner
---------

1: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

KMODE_EXCEPTION_NOT_HANDLED (1e)
This is a very common bugcheck. Usually the exception address pinpoints
the driver/function that caused the problem. Always note this address
as well as the link date of the driver/image that contains this address.
Arguments:
Arg1: ffffffffc0000005, The exception code that was not handled
Arg2: fffff8000327c275, The address that the exception occurred at
Arg3: 0000000000000000, Parameter 0 of the exception
Arg4: ffffffffffffffff, Parameter 1 of the exception

Debugging Details:
------------------
EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.

FAULTING_IP:
nt!KeAcquireSpinLockRaiseToDpc+55
fffff800`0327c275 f0480fba2900 lock bts qword ptr [rcx],0

EXCEPTION_PARAMETER1: 0000000000000000

EXCEPTION_PARAMETER2: ffffffffffffffff

READ_ADDRESS: GetPointerFromAddress: unable to read from fffff800034ab0e0
ffffffffffffffff

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

BUGCHECK_STR: 0x1E

PROCESS_NAME: System

CURRENT_IRQL: 2

EXCEPTION_RECORD: fffff880060a7808 -- (.exr 0xfffff880060a7808)
ExceptionAddress: fffff8000327c275 (nt!KeAcquireSpinLockRaiseToDpc+0x0000000000000055)
ExceptionCode: c0000005 ... Read more

http://www.sevenforums.com/bsod-help-support/82193-bsod-problem-any-effective-solution-please-help-me.html
Relevancy 41.28%

Hi I am a parent of a teen who goes to a large school almost students Last year I started sending out a weekly email to some a to be Access or Excel this Would problem? better solution of the parents with a list of the events at the school The way I collected this data was time-consuming I downloaded and printed calendars for each sport Would Access or Excel be a better solution to this problem? and club that I Would Access or Excel be a better solution to this problem? could and put them in a binder Each week I would find the events for the upcoming event and type it into a word document Then I would visit the school's website and check the announcements and counselors' web pages for events and add them to the word document I copied the word document into an email message and sent it out in batches I had less than email addresses The people who got the email liked it and the school wants to expand the list We are looking at Constant Contact as an option If anyone has an opinion on that I would like it Here is short sample of what I would send out THIS WEEK S CALENDAR Monday - PM Student Council Meeting- PM Special-called Board Meeting Spotlight Awards- PM Dazzler Booster Club MeetingTuesday - PM Auto Tech Awards Night Commons Wednesday - PM to PM AFJROTC Pot Luck Dinner and Awards Program THIS WEEK S ATHLETICS BASEBALLThursday - PM Varsity vs Georgetown High School at Georgetown N Austin Ave Regional Play-offsFriday - PM Varsity vs Georgetown at RidgeSaturday - noon Varsity vs Georgetown at Georgetown if needed UPCOMING EVENTS Saturday -Athletic Booster Club Casino Night at Crazy FrogsTuesday -Seniors Awards Program My question is how could I do this more easily And would Excel or Access work Most of the lists were in Word documents but each one was formatted differently What I envision is that I could import the information into a program and then do a sort or search for the events that fall within the coming week And maybe bleeping computer isn't the best place to ask this question Any help would be appreciated Leah

A:Would Access or Excel be a better solution to this problem?

I think I have decided that the best way to do this is through a Word document.

I just made a long document that is one page per week (inserted page breaks). I had the days of the week written out along the left margin followed by a page break, and copied and pasted it to the bottom of the document about forty times. Went back in and added dates chronologically beginning with next week's dates. Saved that document as a master and then saved again as master athletic schedule. (It is easier to keep the two separate.)

So, instead of searching schedules and websites for info the the upcoming weeks, I'll input the scheduled items onto the master schedule, a sport, club or fine art organization at a time. I hope that won't take too long.

Then, when it comes time to send the email, I'll do a check to see if there is anything new or that has changed, and then copy the info from the master document and paste into the email.

Leah

P.S. Would still be interested in any comments!

http://www.bleepingcomputer.com/forums/t/337032/would-access-or-excel-be-a-better-solution-to-this-problem/
Relevancy 41.28%

I ran malewarebytes in safe mode and it found one infection. I deleted it, restarted in regular mode and its still there. Im thinking maybe because I haven't updated malewarebytes in a while? Thanks for the help.

Relevancy 41.28%

When I made a password to my harddisk it asked me to save the recovery key somewhere, So.. I saved it inside the hdd and this is the problem
Cause after that, I wanted to enter the harddisk but i couldn'n remembere the password, and of caurse the recovery key is inside the hdd which i can't enter any more without remembering the password

So.. can anybody help me with a solution to this problem pls ?!! I'll be so thankful

A:What is the solution to the problem of BitLocker Drive?

Drive encryption can really bite some people in the behind.

If there was an easy solution to this problem, there would be no point to encrypting the drive in the first place. So you will either need to remember the key or attempt to brute force guess you way into the box.

http://www.sevenforums.com/system-security/234018-what-solution-problem-bitlocker-drive.html
Relevancy 41.28%

After seeing numerous threads on the infamous "locked for editing" problem, I thought I'd share an answer - possibly not the answer, but one that has worked every time for me.

The problem usually is created when you have a MS file open and a page fault, memory, or some other error occurs. The corresponding temporary file (~xxxx.tmp) stays hidden and won't get deleted on a reboot (or even in DOS).

Solution:

1. Close all Word, Excel, etc., documents and the programs themselves.

2. Open the folder where your documents (such as *.doc, etc.) are stored.

3. Find any *.tmp files ... right-click on each one, select Properties, and then uncheck the box marked hidden - now click on Apply and then OK.

4. Next highlight these *.tmp files and press the Delete key followed by the Enter key.

You should now be able to normally access and edit the files.

john.s
(newbie to the forum)
 

A:A solution for LOCKED FOR EDITING problem

Welcome to tSG!

Good to see that you're jumping right in with useful and helpful advice.

Keep it up!

BTW, for future reference, post these wonderful little gems in Tips and Tricks!
 

https://forums.techguy.org/threads/a-solution-for-locked-for-editing-problem.77111/
Relevancy 41.28%

Hi!
I have a problem with burning .avi files using the NERO 5.5 software.
For some unknown reason when I add the file I want to burn to the list of files I want to put on the cd, the file gets a lot larger.
Dor instance, on my HD I have a file which is 576 MB but when I add it, it turns to b 961 MB. why?
it's an .avi file, I chose the Video CD option and another thing is that before it burns the cd it does file encoding...
please help me,
nobody else I asked did!!!
thanks in advance
 

A:Help!!! Nobody knows the solution to this NERO CD burning problem I have. Do U?

https://forums.techguy.org/threads/help-nobody-knows-the-solution-to-this-nero-cd-burning-problem-i-have-do-u.148064/
Relevancy 41.28%

Hello all I've been wrestling with this problem solution. read Possible CD/DVD problem Blank - a while now and have tried pretty near all the hints and tips on the Forum to no avail Having lost one or Blank CD/DVD read problem - Possible solution. two DVD's formatting them via the open Explorer folder method and choosing the 'Live File System' or 'Mastered' only to find the Blank CD/DVD read problem - Possible solution. DVD un-useable as it's already FULL ie no free space Got to thinking about that and realised you don't really FORMAT a DVD the way you do a hard drive you burn files to it So I had a look and thought where is the BURN option on my Windows Explorer ribbon bar This is what you should see - Mine was missing See attachment - Ribbon Bar Off to the big Google in the sky to look into this and found an article showing how to REMOVE the BURN option so I thought well if you can remove it you can put it back This is the article hope the mods don't mind me showing something from another Forum How to Remove Burn Button from Windows Explorer Command Bar in Windows - Tweaking with Vishal If you read through it things are quite straight forward even though it is a REGISTRY poke about so make sure you BACKUP the registry first Assuming most of you have either the Home Basic or Home Premium versions of Windows the nd part of the article is more relevant Following the instructions as if I was going to REMOVE the BURN button I was surprised to find I had the DWORD 'NoCDBurning' already in my registry How it got there I have no idea I took the simple step of deleting the whole DWORD entry After a re-boot the results were - First DVD I put into my drive up pops the expected FORMAT choice dialogue box Step one passed ok Dragged a few files and odds and ends to the DVD The vital thing here is the quot Close Session quot button appearing This is what you should see - See attatchment Ribbon Bar This closes down the burn operation so you can add more files at a later time to the DVD Step two passed ok I have added files to the same DVD four different times now so things are working ok I'm not sure if this will work for you but it's worth checking out that DWORD entry and finding out what the setting is on your machine All the best Mick C P S I've been using DVD-R CD-R and CD-RW for this testing

A:Blank CD/DVD read problem - Possible solution.

One word of caution, UDF formatted discs (RW) have a history of losing format and/or data. This goes back many years and includes Nero InCD, Roxio Drag to disc, etc. It would appear these discs can be used like the old floppies and to add, remove data, reformat, use again, etc. But its an iffy proposition. Best suggestion, if you want to use UDF, do not have your only copy of any data on one of these.

My take is if I want to put it on a disc, I use an "R" disc only. Discs are now relatively cheap so 10 or 15 cents (US) for something to save data to is insignificant. The other option is to use a flash drive instead of an RW disc, you can then read, write, rewrite, etc.

I also use a regular burning program (I have the full Nero suite that I use in my recording studio). The free and popular Imgburn and CDBurnerXP are other options.

http://www.sevenforums.com/hardware-devices/300862-blank-cd-dvd-read-problem-possible-solution.html
Relevancy 41.28%

HI Everyone i am student of animation and i use softwares like 3ds max n maya i was using windows xp sp2 that was working properly then one day the windows crashed and pc was restarting (it cant load windows). i m having 500gb hdd, so i formatted c drive and installed windows again but now i cant install my softwares like max, maya or z brush properly(initially they gat install but after reatart of pc they get currupted) whith this i cant install any games with high graphics.... small softwares like photoshop n players are installing properly with no prob. then i formatted windows again and installed vista but then too i m faceng the same prob.

can u please help me with this problem...
 

A:Need help finding problem and giving solution

When the system crashes does it give Blue Screens and are there error codes along with listed drivers? If so please give us both.
 

http://www.techspot.com/community/topics/need-help-finding-problem-and-giving-solution.136775/
Relevancy 41.28%

THIS IS FOR VISTA USERS WHO HAVE TRIED USING THE "RESET ALL" BUTTON OR RESET IE7 TO IT'S FACTORY'S SETTINGS... but have failed

GO FROM THIS...



TO THIS...



BY opening internet explorer 7
clicking Tools->Internet Options



then click on connections tab



then click on LAN settings-> then uncheck "use a proxy..."

A:Solution To Vista Ie7 Cannot Connect Problem

works for all vista users who have not suspected mal/spyware and have tried the "reset all button"

http://www.techsupportforum.com/forums/f217/solution-to-vista-ie7-cannot-connect-problem-221977.html
Relevancy 41.28%

I feel more than foolish (less than?). For months I've been annoyed by Windows' continuing to tell me to turn my firewall on. I did and then next boot, same thing. I cannot tell you why I didn't do this sooner but I finally did do a search on it and the answer is so obvious. But in case someone else is fighting the battle, and to thank "Golden", I'm posting a screenshot of the solution.

So. Thanks SevenForums and Golden.

Gorham

A:Thank you for solution to Windows 7 firewall problem

Thanks for posting back that this helped you Gorham - glad we could be of assistance

http://www.sevenforums.com/system-security/286018-thank-you-solution-windows-7-firewall-problem.html
Relevancy 41.28%

**lOvE PrObLeM SoLuTiOn +917891556551****lOvE PrObLeM SoLuTiOn +917891556551****lOvE PrObLeM SoLuTiOn +917891556551****lOvE PrObLeM SoLuTiOn +917891556551****lOvE PrObLeM SoLuTiOn +917891556551****lOvE PrObLeM SoLuTiOn +917891556551****lOvE PrObLeM SoLuTiOn +917891556551****lOvE PrObLeM SoLuTiOn +917891556551****lOvE PrObLeM SoLuTiOn +917891556551****lOvE PrObLeM SoLuTiOn +917891556551****lOvE PrObLeM SoLuTiOn +917891556551**

http://en.community.dell.com/support-forums/laptop/f/3518/t/19978043
Relevancy 41.28%

We have a Wifi on a camp site working again after hours of Solution what ?? cross-cable, is problem the was but experimenting but we have no clue as to what was the problem This is bugging us Setup Telephone ADSL gt Solution is cross-cable, but what was the problem ?? Standard Solution is cross-cable, but what was the problem ?? modem gt PC with M n wall gt Access point gt Solution is cross-cable, but what was the problem ?? Multiple Laptops M n wall linux-based portal software that creates a welcome password screen similar to what you d find in hotels The PC is a -year old DELL with on-board NIC for entry and extra NIC going to the Access point This was all working fine until we had a storm with a lot of lightning Phone and Internet went dead st conclusion Modem broken but replacement did not work nd conclusion Telephone line faulty This was indeed the case and was repaired This fixed the phone but not internet It turned out that internet did work but only at the exit of the modem Inside the PC the connection to the ISP WAN was down where it should have been active rd conclusion NIC also broken but using another NIC did not help snip- al lot of detours Then we noticed that the LED on the NIC did not light up when connected neither on the M n wall-PC nor on the modem It did light up when something else was connected Then we replaced the standard UTP cable modem to PC by a crossover cable and everything worked fine again Problem solved We now have a physically different setup as compared to before the telephone line was broken and repaired because we now cross between the modem and the rest of the system So either it is working where it should not work or it has been working before where it should not have worked for about a year Either way we cannot figure out what has happened Any clues Is it for instance possible that the Network card has the ability to switch the wires when needed and that the lightning only damaged that part of the NIC leaving everything else intact Seems very far fetched Could it be that the two wires of the telephone line were physically switched and that the modem didn t mind To us it is puzzling and we would like to understand why this crosscable is a solution because it might not be the best one Thanks in advance Bas Hartkamp nbsp

A:Solution is cross-cable, but what was the problem ??

If the modem's or the computer's port is auto-sensing (MDI/MDIX) it doesn't matter whether you use a patch or cross-over cable. Pretty much all ethernet devices made in the last couple years has been auto-sensing. If neither is auto-sensing you use a patch (regular) cable.

While a power surge usually fries the modem or the NIC, it could have knocked out the cable between them.
 

https://forums.techguy.org/threads/solution-is-cross-cable-but-what-was-the-problem.836866/
Relevancy 41.28%
Relevancy 41.28%

I ve had nothing but trouble with the memory in my computer Fails memtest if it runs it at all Any memory fails gig sticks s doesn t matter they all fail in my computer doing memtest V Put the ram in my other computer it passes with problem Strange memory solution of flying colors My usb TV is out of sync audio slowly lags until it is impossible to watch people talk I guess I must lip read a little If I shut off the tv and turn it back on it works for a few minutes until it starts to lag again and Strange solution of memory problem it seems that I am watching Iron Chef I ve been on the support phone for about three weeks daily trying to find out what is wrong found it today I have to turn off USB legacy support What the heck does that have to do with my memory I ve been through a lot of grief with this formatting weekly reloading tons of programs and I would sure be beholding to someone that could explain what the problem was If this is posted in the wrong spot I apologize but I thought it was a Mobo problem nbsp

http://www.techspot.com/community/topics/strange-solution-of-memory-problem.46184/
Relevancy 41.28%

I may have misunderstood a question asked on this site. A user could not find some thumbnail images that were missing from his pictures folder. If so, I found an easy solution: Start > Control Panel > Folders Options > View Tab > Clear check box "Always show icons, never thumbnails". Close.
This step allowed me to see thumbnail images on each file.

I hope I haven't wasted your time.

Wes Duckett
 

A:Solution to missing thumbnails problem

wesleyroyce said:

I may have misunderstood a question asked on this site. A user could not find some thumbnail images that were missing from his pictures folder. If so, I found an easy solution: Start > Control Panel > Folders Options > View Tab > Clear check box "Always show icons, never thumbnails". Close.
This step allowed me to see thumbnail images on each file.

I hope I haven't wasted your time.

Wes DuckettClick to expand...

Thank you. Took care of one issue I've had.
 

https://forums.techguy.org/threads/solution-to-missing-thumbnails-problem.635268/
Relevancy 41.28%

Here is the situation I am running one eqemu server uses tcp udp behind a firewall I want to run three more eqemu servers my router is using dd-wrt i don t understand all the functions but if you tell me to do something with it i can follow instructions I have only ONE external WAN and it s not static ip address to work with The eq clients are LOCKED into using port and there is NO way for me to change it therefore every client HAS to come in through port Port forwarding iptables only let me forward a specific to a single internal ip address unless I purchase a second ip address A problem Solved: ip, no One port! one solution? with from my ISP then I can redirect traffic based on which incoming external ip I can set the server ports and ip addresses to whatever I want on the private side of the router however the client HAS to be coming in through port on the wan side Someone told me that virtual servers or VMware might be the solution but I don t think they fully understood the situation and they weren t sure unless I am missing something I am a bit of a novice in networking everything I learned from google or wiki I haven t had formal training so please be gentle and dont assume I know what you are talking about Thanks in advance for any help Davood nbsp

Relevancy 41.28%

Some time ago someone sent me a link on MSN - unable to solution find problem MSN I clicked on it and it wanted me to sign in using my msn account so that I will get something good out of it I forgot what exactly But after doing so I realised that it's a virus and my messenger has been full of problems since then Firstly a lot of my MSN problem - unable to find solution messages doesn't get through to the other person whom I'm talking to I can MSN problem - unable to find solution type and type many types but it will just say quot error quot Secondly the msn keeps logging out by itself when I have done absolutely nothing This occurs so frequently that I have difficulty making a conversation with someone Thirdly and most importantly I keep sending similar links to others even when I'm logged off The links look like this kind http xmas realdealzz com I tried looking for a solutions online There was one available but apparently it was for a different kind of virus The one I found was for the virus you get when you accept a pic file and you get solve the problem by deleting the file But in this case I didn't accept any file I just logged into a website using my account No solutions were found for this kind of problems Does anyone know how to solve this problem I really want to fix it as soon as possible because I'm like troubling all my friends by sending them links I've also caused one of them to get infected

A:MSN problem - unable to find solution

Hello and Welcome to TSF.

Please Subscribe to this Thread to get immediate notification of replies as soon as they are posted. To do this click Thread Tools, then click Subscribe to this Thread. Make sure it is set to Instant notification by email, then click Add Subscription.

Please note that the forum is very busy and if I don't hear from you within three days this thread will be closed.

If you're not receiving help elsewhere and still require assistance for this issue, please follow the process outlined here:

NEW INSTRUCTIONS - Read This Before Posting For Malware Removal Help

After running through all the steps, you shall have a proper set of logs. Please post/attach as instructed.

If you have trouble with one of the steps, simply move on to the next one, and make note of it in your next reply.

------------------------------------------------------

http://www.techsupportforum.com/forums/f284/msn-problem-unable-to-find-solution-328620.html
Relevancy 41.28%

hello guys well here is my problem, havent Help Big solution. u can. if found problem i was just chillin on my pc friday night and my pc shutsdown and reboots and since it wasnt uncommon kinda happening when i overloaded my pc with turned on but then its before the windows logo it turns black my screen doesnt shut down it just turns into the color black So after that i tried to Big problem, havent found solution. Help if u can. login wndows safe mode and it gets black again everytime i tried to get into the windows it just turned black safe mode previous functioning settings nothin worked then i got my windows cd to format i put cdrom priority above the disk and all that i turn it on goes into quot boot from cd quot then again black tried and tried friends came to help me over it prob means that something on my hardware got fried but before i go out and buy a new one i was hoping maybe someone of u genious could make a miracle happen and get this fixing thank you

A:Big problem, havent found solution. Help if u can.

i would check your memory ive seen that happen when dimms go bad.

http://www.techsupportforum.com/forums/f10/big-problem-havent-found-solution-help-if-u-can-563303.html
Relevancy 41.28%

Hi all,

I am using a Sony vaio laptop VGN-SZ75GN. I recently upgraded my windows vista busniess 32-bit to a windows 7 ulitmate 64-bit using a clean installation.

I have a external graphic card which is NVIDIA? GeForce? 8400M GS notebook graphics processing unit(GPU) (SPEED MODE) / Intel? Graphics Media Accelerator X3100 (STAMINA MODE). After installing Windows 7, it couldn't detect the graphic card. This was done by looking at the device manager saying that it only detected a stardard VGA Graphic Adapter. I tried to check for updates, but it said that the stardard VGA Graphic Adapter was the best driver software. I looked around the forum like a headless chicken and couldn't find a solution for my laptop.

Can anyone find a solution for my problem? Will be very much apprieciated.
This are some of the pictures of my laptop's specs.

Yours Sincerely,
Legendation.

A:Hi all. Need solution for my graphic card problem.

Hi.

Follow this link.

http://www.sevenforums.com/graphic-cards/37339-hi-all-need-solution-my-graphic-card-problem.html
Relevancy 41.28%

Hello, i hope someone can help.

I have a Packard Bell intellinote laptop, the laptop boots up as normal but the screen is black. when i try and close the lid the screen switches back to normal and bright, but when i open the lid about halfway it again goes black

i am not sure what is going on.

Can someone help?? Is it faulty?? Is the video card broken?? Is it something to do with drivers???

Please help

Cheers
 

A:Laptop Problem, whats the solution???

Could be a loose connection. Because it's a laptop you need to take it to the shop for them to look at.
 

https://forums.techguy.org/threads/laptop-problem-whats-the-solution.379975/
Relevancy 41.28%

I have vista home premium and for months now iv tried to use windows update, i click to install the updates and then after a while it says "preparing to install updates".

This however never changes no matter how long i leave it, i dont recieve any error message.

Its stopping me for getting updates for windows live messenger and getting the new Internet explorer version because i dont have the required updates.

Can anyone help??

Thank you!

PS. i have attatched a screen shot

A:Can't find a solution to this update problem!

Download and install the following updates:

Windows Installer
DirectX (You need this whether you running DirectX 9, 10 or 10.1)
.NET Framework
C ++ for Vista 32 bit
C ++ for Vista 64 bit

Now reboot your pc. Once back at the desktop run windows update again. It will come up with a list of all the updates available for you. Uncheck every box except for the oldest update. Then click Install.

This way you are telling vista to only install one update. If that fails then run windows update again and select a different update to install making sure that you only select 1 update to install.

http://www.vistax64.com/windows-updates/228051-cant-find-solution-update-problem.html
Relevancy 41.28%

A friend of mine recently encountered a problem he wanted me to fix for him.  Svchost would eventually eat up all his RAM & run at, or near, 100% cpu, rendering things useless.
 
I found that a virus had patched a system file called RPCSS.
 
I renamed the infected file & copied a legit version from another PC.  Problem solved.
 
Don't know why MBAM never found it.

A:Old problem, new solution. Svchost high CPU.

A friend of mine recently encountered a problem he wanted me to fix for him.  Svchost would eventually eat up all his RAM & run at, or near, 100% cpu, rendering things useless.
 
I found that a virus had patched a system file called RPCSS.
 
I renamed the infected file & copied a legit version from another PC.  Problem solved.
 
Don't know why MBAM never found it.
 
AFAIK...neither MBAM nor any other single program...is capable of detecting all of the various instances of malware.  I know that many like to believe such to be the case...but it just isn't so, IMO.
 
Louis

http://www.bleepingcomputer.com/forums/t/528710/old-problem-new-solution-svchost-high-cpu/
Relevancy 41.28%

Hi, i hope someone can help

What has happened is that where the actual charger wire goes at the back of the laptop has gone loose and broken. I am talking about the hole at the back where you put the charging wire, this bit has broken.While the laptop was charging someone tripped over the wire and the actual bit inside the laptop came loose, now it does not charge and the batteries are dead :-(

Does anyone have an idea of what is needed to reair this???

Also someone told me i may need to replace the motherboard, is this true?

Also will i be able to fix it?? will it be eady to fix or do you recommend i pay someone to do it?

Lastly roughly how much will it take to fix??

Let me know

Thanks
Sam
 

A:Laptop Problem, whats the solution???

You would actually have to open up the laptop and look inside to see the extent of the damage.
I'd get an estimate from a repair shop before I did anything else.
 

https://forums.techguy.org/threads/laptop-problem-whats-the-solution.367628/
Relevancy 40.85%

Hi there gurus.

My pc doesn?t show certain colour objects in Publisher 2007 and some on-line sites. Overall, the screen colour is generally very good. I know the fault is localised, because when I switch to Print Preview in Publisher it looks fine and I can see all the object colours. (I only lose the colour with objects, not text)
Also, when I send a copy of a Publisher page to my partner who is on the same PC, it looks fine on her screen.

I?ve tried going to Install/uninstall programs and run the Repair, but to no avail. The guys in my computer shop are clueless without seeing it. Anyone who can help solve this for me is a gem.
Cheers!
David

A:This is my 2nd shot at posting my problem. Hasn't anybody out there got a solution?

Hi welcome to TSF,

if it's only showing under your profile but it's fine under another profile on the same machine, ergo it's a profile problem somewhere.

Delete and recreate your user profile, let us know whether this resolves for you.

http://www.techsupportforum.com/forums/f10/this-is-my-2nd-shot-at-posting-my-problem-hasnt-anybody-out-there-got-a-solution-474971.html
Relevancy 40.85%

I have a Windows -bit Dell do problem, my or reset a fact. a specific to should there Is solution computer One day while going through some un-wanted programs and un-installing them my theme suddenly changed from aero to basic theme From there on everything went horribly wrong my audio and video ceased to work they work in safe mode Microsoft Security Essentials Dell Webcam Central and Audio FX Engine have been un-installed without my consent Sometimes it wont even start up in normal mode I Is there a solution to my specific problem, or should do a fact. reset log in but it stays on the loading screen windows explorer wont work I can't go into programs such as quot Services quot for it says I Is there a solution to my specific problem, or should do a fact. reset have Is there a solution to my specific problem, or should do a fact. reset my theme will start in aero in normal mode and then switch after a few minutes It states on multiple accounts when I want to open something quot Error Message Not enough storage is available to complete this operation quot One along the lines sof quot You do not have the authority to access memory quot and recently a Windows message saying quot This service cannot accept control messages at this time quot I can no longer rate my computer my drivers seemed to un-install and I am at my wits end I've seen multiple reports of Aero theme automatically switching to basic after a minutes of login yet no solution working solution was provided Doing a Please advise me on what to do As I'm sure you've noticed I'm not the brightest person please carefully explain each step

A:Is there a solution to my specific problem, or should do a fact. reset

Sounds like it`s toast, I would re install windows. I wouldn`t think twice about it with all those problems.

But ............ you could try a system restore first. If you`re still not happy, then do a factory reset.

Backup your data before you try anything

System Restore

Clean Install Windows 7

Clean Reinstall - Factory OEM Windows 7

Use your COA to activate windows.

http://www.sevenforums.com/general-discussion/339173-there-solution-my-specific-problem-should-do-fact-reset.html
Relevancy 40.85%

i am having all kinds of problems and they are all stating basically the same thing as the titile it is either: internet options will not open when i click on the icon in the control panel; problem solution stopped working. When I am away from my laptop for some time and it goes into the sleep mode i click on the icon to start working again it will click back to the locked icon. i am a novice when it comes to troubleshooting; also i get the same message when i try to clean disk (problem reporting solution stopped working)

A:problem report solution stopped working

The first thing I'd do is run chkdsk from the Recovery Console.

Instructions:

1) Boot from the Vista CD

2) Choose the Repair -> Recovery Console options when prompted.

3) Type "chkdsk /r" (without the quotes) at the prompt

This will likely take 30-40 minutes, but often solves many OS related issues.

If chkdsk hangs or otherwise doesn't complete all 5 steps, let me know. That's unlikely, but I've seen it happen.

Assuming chkdsk does complete, reboot the laptop and see if you can access internet options or still receive errors. Reply with results.

http://www.techsupportforum.com/forums/f56/problem-report-solution-stopped-working-533894.html
Relevancy 40.85%

I have a Windows -bit Dell computer One day while going through some un-wanted programs and un-installing them my theme suddenly changed from aero to basic theme From there on everything went horribly wrong my audio and video ceased to work they work in safe mode Microsoft Security Essentials Dell Webcam Central and Audio FX Engine have been un-installed without my consent Sometimes it wont even start up in normal mode I log in but it stays on the loading screen windows explorer wont work I can't go into programs such as quot Services quot for it says I have my theme will start in aero in normal mode and then switch after a few minutes It states on multiple accounts when I want to open something quot Error Message Not enough storage is available to complete this operation quot One along the lines sof quot You do not have the authority to access memory quot and recently a Windows message saying quot This service cannot or specific my a to fact. problem, do a solution should Is reset there accept control messages at this time quot I can no longer rate my computer my drivers seemed to un-install and I am at my wits end I've seen multiple reports of Aero theme automatically switching to basic after a minutes of login yet no solution working solution was provided Doing a Please advise me on what to do As I'm sure you've noticed I'm not the brightest person please carefully explain each step

A:Is there a solution to my specific problem, or should do a fact. reset

It sounds like a reinstall is needed. F8 at power on will access the Dell PC Restore and allow restoring back to the factory condition. However, before you do that, backup (copy) all your user data to some other media such as CD's, USB flash drive or external hard drive as all data will be lost when you do the backup.

http://www.sevenforums.com/sound-audio/339172-there-solution-my-specific-problem-should-do-fact-reset.html
Relevancy 40.85%

Hi
Looking for a solution to a recent HP 5280 Photosmart printer problem (was previously working well). On trying to activate the HP Solution Center icon to use the scanning features of this printer, the screen flashes up the the function then I receive the msg "No HP devices have been detected. HP Solution Center will close now." Have uninstalled and reinstalled followed all the HP Tech advice to check functionality etc - still no joy and HP Tech seem unable to assist. Can anyone help with a solution for this problem.
Thanks Nyaa
 

Relevancy 40.85%

After running the latest Windows Update this week I found that IE11 would not start at all. Other browsers started as normal.
After many false leads I finally nailed the issue down to a Logitech service called "process monitor" which was installed with the webcam software. This starts a service by default called LVPrcSrv.exe. After disabling and then re-enabling services using msconfig.exe I finally found that this was the offending culprit. I uninstalled the relevant Logitech software module which I wasn't using anyway and everything works again normally.

I post this now in case it save someone else a few hours of false trails.

http://www.eightforums.com/browsers-mail/68486-problem-solution-ie11-will-not-start-after-win-update.html