Windows Support Forum

Unable to open "Uninstall a Program" through Control Panel

Q: Unable to open "Uninstall a Program" through Control Panel

Hi

Not sure if this is the right thread for this post.

I am unable to open "Uninstall a program" through control panel. Everytime when I try to open it, I get the following error message

"Windows cannot find '::{26EE0668-A00A-44D7-9371-BEB064C98683}...:{7B81BE6A-CE2B-4676-A29E-EB907A5126C5}' Make sure you typed the name corerctly, and then try again.

However, I can open this in safe mode. Unsure why this is the case. Have tried googling for help but none found.

I use Win 7 64bit.
Please help me here.
Many thanks

Relevancy 100%
Preferred Solution: Unable to open "Uninstall a Program" through Control Panel

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Unable to open "Uninstall a Program" through Control Panel

Hello jason & welcome to SevenForums!

Have you been trying to deleting this program by deleting the folder in the DATA path? It would probably fail after trying to uninstalling in the control panel then.
Try looking for the path and see if it's there!

Also, try this well popular software, for a perfect uninstallation of a software:

Revo Uninstaller

Best Regards,
FredeGail

http://www.sevenforums.com/software/171726-unable-open-uninstall-program-through-control-panel.html
Relevancy 51.6%

I just solved my own problem and thought others might benefit since I could not find the solution using internet search My Realtek HD Audio manager seemed to be creating an echo on my quot Line In quot HD Audio Realtek "line from effect) (if in" echo it Removing output sound not a is audio signal I had already set the environment and equalizer sound effects options to lt None gt but the echo persisted I found the problem seems that I was essentially duplicating the Removing "line in" echo from Realtek HD Audio output (if it is not a sound effect) Line In audio stream The first quot source quot I found was the HD Audio manager You can open the manager and view the Line In tab - mine had a non-zero playback volume the slider was NOT all the way to Removing "line in" echo from Realtek HD Audio output (if it is not a sound effect) the left for zero playback If you want Removing "line in" echo from Realtek HD Audio output (if it is not a sound effect) output from the HD Manager that makes sense I also found out a second Line In quot source quot It was in the Line In properties settings where I had checked off the option to quot Listen to this device quot When I disabled that the echo disappeared To view this Line In properties tab right-click on the speaker icon in the notification area then select Recording Devices yes quot Recording quot Then the tab will display in a window with the title Sound You should see the Line In device in the list Right-click on this item and select Properties The Line In properties window pops up Then select the Listen tab UNselect Listen to this device The echo should disappear if you re experiencing my problem I hope this helps someone I m just trying to help the community from which I ve received so much help grinthumb nbsp

A:Removing "line in" echo from Realtek HD Audio output (if it is not a sound effect)

Two same signals

You're doing the right thing... getting rid of the other input signal.
 

http://www.techspot.com/community/topics/removing-line-in-echo-from-realtek-hd-audio-output-if-it-is-not-a-sound-effect.178881/
Relevancy 44.29%

I have a choice to make on a new monitor.

It needs to be VESA mountable and will be for strategy gaming and work purposes. Games like Wargame, Supreme Commander and World of Tanks. I work as a sysadmin so think lots of windows open!

Do I get a 24" monitor like this Benq (recommendations on a different one are welcome)

Or do I get a 27" monitor. If you think 27" what res would you recommend baring in mind I am sporting a 760gtx.

Thanks,
 

A:24" monitor or 27"

I think 1080P is the best bet for your GTX 760. 2560x1600 or 2560x1440 (27 inch panels) might be a bit too much. It is really personal preference whether you weant a 24 inch or a 27 inch. There are 1080P monitors in both sizes. I recommend Dell, BenQ, ASUS, Samsung, and ACER monitors. There are some other good ones, but I cant think of them off the top of my head.
 

http://www.techspot.com/community/topics/24-monitor-or-27.201808/
Relevancy 19.35%

After months of build-up, AMD has finally unveiled its true next generation graphics card. The Radeon R9 Fury X broke cover at E3 last week and the review embargo lifted just days ago. While it's not the Titan killer some...

Read more
 

A:Weekend Open Forum: AMD or Nvidia?

And it starts!
Started with amd 7970
Then went nvidia 770sli now 980ti.
I just really like the physx and 3d nvision
 

http://www.techspot.com/community/topics/weekend-open-forum-amd-or-nvidia.215859/
Relevancy 24.08%

Hi, I have a single network with wired and wireless connection. I would like to control bandwidth usage by the users because some users just download big files while others watch movies on the network.
how best and how first can I solve this?
is it possible for me to allocate bandwidth to a specific access point?
I badly want to find users who are watching movies or downloading big files and control them.
thank you
 

A:Bandwidth monitoring and control

First caveat, there's a difference between Monitoring vs Controlling bandwidth.

That said, Paessler has good tools for monitoring. It is not clear that they also control.

They document Four Methods of Monitoring.

Download and use the 30-day free trial.
 

http://www.techspot.com/community/topics/bandwidth-monitoring-and-control.216145/
Relevancy 19.35%

Hi all,
I am new to this forum..
To start, I had just bought an ASUS computer.. wanting to play games like borderlands 1, left for dead 2 etc. But, when I was very trilled waiting to start the games, both of them had blacked screen and forced shutdown my computer every time after the game has been launched!
I had done many researches in the net, changing the registry values in directx11, reinstalling the NVIDIA drivers (halfway black screen upon reinstalling), changing the compatibility to Windows 7, adding missing physxcudart_20 to the games...None of them works..T-T
Any help is greatly appreciated!
 

A:Unable to install Nvidia driver and also to play games on Windows 8.1

I'd recommend to do the following:

Perform a clean install of Windows

Re-install Nvidia drivers
Download CPU-Z and GPU-Z (or any CPU and GPU monitoring software)
Monitor both while attempting to play games - check for temperature spikes.
Doing the above will help you rule out a lot of potential issues that are causing your problems. The clean windows install will get rid of any OS related issues. You never want to touch the windows registry unless you really have to, especially if you're not very well versed in the way it works. It can cause way more harm than good. With that said, the system crashes were probably due to a bad driver instillation and was causing a BSOD - most modern systems are set to restart / shutdown when this happens. You'll never know it happened unless you changed the configuration to stop the automatic shutdown. It could also be temperature related, if your CPU or GPU overheats, it'll typically trigger a system crash as well and result in the same BSOD sequence.

Let me know how it goes after you've tried what I've mentioned.
 

http://www.techspot.com/community/topics/unable-to-install-nvidia-driver-and-also-to-play-games-on-windows-8-1.213781/
Relevancy 19.78%

So about a few weeks ago (not exactly sure when it started) my computer stopped allowing me to access certain websites. It started out with only a few, but now it is almost 50-80% not connecting. I do not think it is a problem with my browser. I typically use Firefox, but IE will connect to the same ones Firefox allows, and will also not connect to the same websites Firefox will not allow.

I have searched these forums for a couple of hours now and nothing seems to fit my exact problem, and I am hesitant to use the solutions from other forums because it might further hurt my system. I am not tech-savvy/computer literate to say the least, and I would need a thorough walk-through on how to diagnose the problem, as well as how to fix it.

Any help would be greatly appreciated.
Thanks
 

A:Unable to connect to most websites -- not a browser problem

How are you not allowed to view the website? Does the page show "The page cannot be displayed"? or you are not authorized or something else?

Try running cmd.exe, type "ipconfig /flushdns" without quotes.
 

http://www.techspot.com/community/topics/unable-to-connect-to-most-websites-not-a-browser-problem.177710/
Relevancy 50.74%

Hey there all.

This problem just happened recently. Every time I put a blank CD in my CD drive, a message appears saying "E:\ is not accessible. Incorrect Function. I can watch DVDs but it won't recognize any blank CDs I put.

Any ideas?

Thanks in Advance.
 

A:Drive is not accessible - "incorrect function"

First try this from the Windows Explorer after you have inserted a disc.

Right-Click on E: drive

Select Properties from the pop up menu

Select the Recording Tab

then check the "Enable CD Recording On This Drive" box.
.
 

http://www.techspot.com/community/topics/drive-is-not-accessible-incorrect-function.166087/
Relevancy 25.37%

LG Australia has revealed a new FreeSync monitor on their website perhaps a little earlier than the company anticipated, and it could be a great option for gamers wanting to upgrade to a 4K display.

Read more
 

A:LG's 27MU67 monitor packs FreeSync alongside a 4K, 27-inch IPS panel

4 way split? That's pretty cool. I know other monitors have done it (though none immediately come to mind) but very cool nevertheless. It might not be an IPS type panel but that's not a bad price all things considered.
 

http://www.techspot.com/community/topics/lgs-27mu67-monitor-packs-freesync-alongside-a-4k-27-inch-ips-panel.213446/
Relevancy 18.92%

Anyone that spends a considerable amount of time in front of a monitor can attest that finding the right mouse is a must. While there are plenty of boxes to tick when searching for a suitable pointer, for me, it...

Read more
 

A:Weekend Open Forum: What kind of mouse do you use?

Roccat Kone XTD (laser). It's the best mouse I've had so far. My Death Adder has been demoted to closet duty.
 

http://www.techspot.com/community/topics/weekend-open-forum-what-kind-of-mouse-do-you-use.212356/
Relevancy 51.17%

I have scoured the from computer, sounds" can speakers "computing my hear my through I internet for a solution to this and have found nothing First my dxdiag is attached I have had this issue for over a year now and I am getting fed up If I put my ear to my pc I can hear computer noises coming from it I can not compare it to another sound as there is nothing else to compare it too it just sounds like my CPU or Hard Drive thinking That doesnt bother me though I expect my computer to make some noise HOWEVER I dont expect to hear it in my speakers too I have a lot of speakers and a lot of headphones no they are not I can hear "computing sounds" from my computer, through my speakers the problem Right now I am using a knappenberger tube hooked up to a GK MB just cuz I can When I plug in any speakers I can hear the CPU sound through them regardless of the volume level I can turn the speaker all the way down and yet the sound will come through This leads me to believe I can hear "computing sounds" from my computer, through my speakers it is a grounding issue or electrical to some degree I would like to try physically grounding my case to see if it would eliminate this God awful feedback However I can not find a guide as to I can hear "computing sounds" from my computer, through my speakers the best way to do this or any other suggestions So here I am Help me and earn my eternal gratitude Some notes If I unplug all of my cables except power and the speaker cable I still hear it if I plug in my speaker cable to my monitor instead of my PC I still hear it Front port still hear it I have yet to try a different sound card as I dont have one Once I find one I will update nbsp

A:I can hear "computing sounds" from my computer, through my speakers

Checked some settings in the Bios, noticed the sound isnt there while navigating it. Static started once windows loaded. Maybe it is some sort of issue with the hard drive
 

http://www.techspot.com/community/topics/i-can-hear-computing-sounds-from-my-computer-through-my-speakers.202182/
Relevancy 49.88%

I have a desktop computer that is running on Windows Xp, up until this morning, everything was fine, I could connect to the internet with no problem.

I turned on my computer, and it is telling me that the network cable is unplugged, as well as my network is not showing when i go to "my network connections"

But yet.....

I AM connected to my router, and there is no problem with the cord (I tried it on different computers as well as my Xbox 360 on the same port....so I know its not the router)....when I go into device manager, everything seems to be working correctly, and my network adapter and ethernet card both are marked as working properly.

Any ideas how I can fix this issue ?
 

A:"Network cable is unplugged" but its really not..

sadgyrl514 said:





I have a desktop computer that is running on Windows Xp, up until this morning, everything was fine, I could connect to the internet with no problem.

I turned on my computer, and it is telling me that the network cable is unplugged, as well as my network is not showing when i go to "my network connections"

But yet.....

I AM connected to my router, and there is no problem with the cord (I tried it on different computers as well as my Xbox 360 on the same port....so I know its not the router)....when I go into device manager, everything seems to be working correctly, and my network adapter and ethernet card both are marked as working properly.

Any ideas how I can fix this issue ?Click to expand...

Try rebooting,
 

http://www.techspot.com/community/topics/network-cable-is-unplugged-but-its-really-not.166539/
Relevancy 25.37%

The National Association of Broadcasters (NAB) trade show is in full swing this week with several technology giants on hand to show off their latest products. One of the early frontrunners for attention is HP's new DreamColor Z32x, a professional-grade...

Read more
 

A:HP's massive professional-grade 4K monitor features 10-bit color spectrum, IPS panel and more

The picture in picture feature is awesome
 

http://www.techspot.com/community/topics/hps-massive-professional-grade-4k-monitor-features-10-bit-color-spectrum-ips-panel-and-more.211399/
Relevancy 17.2%

Hello friends
i am unable to get sound from the external speakers , when the speaker jack is connected to the cpu i hear sound from the internal speakers, how do i get my external speakers working

regards
Shiv
 

A:Unable to hear from the hear external speakers

shiv said:





Hello friends
i am unable to get sound from the external speakers , when the speaker jack is connected to the cpu i hear sound from the internal speakers, how do i get my external speakers working

regards
ShivClick to expand...

How about some more info about your system man?

http://www.techspot.com/vb/topic33297.html
 

http://www.techspot.com/community/topics/unable-to-hear-from-the-hear-external-speakers.174073/
Relevancy 49.88%

I'm trying to record some karaoke but every time I play back the recorded track, the music is "doubled" with a slight delay, as if the laptop's built-in microphone was picking up the music along with my voice. Here is an example:

http://www.singsnap.com/karaoke/watchandlisten/play/c58ef46c3

Notice how those staccato notes are doubled with that slight delay.

I'm using Windows 7 on a Dell laptop with Realtek.
Under Playback I have two devices: Loudspeaker (enabled) and Realtek Digital Output (disabled)
Under Recording I have: Microphone (enabled) and Stereomix (disabled)

I'm recording using headphones and the laptop's built-in microphone. This is what the Realtek Audio Manager looks like:

It's in German but most options are self-explanatory.

If you could help I'd be very grateful.

Thanks for reading.
 

http://www.techspot.com/community/topics/bleeding-when-trying-to-record-on-laptop.211024/
Relevancy 51.17%

I have been having this issue for about 2 weeks now. Ive literally tried everything including uninstalling/reinstalling network card, restore points (there are none), a windows update download, and reformatting the hard drive (wont let me). Any help is appreciated. I cant afford a new pc or any new hardware at this time.
 

A:"Failed to query TCP/IP settings of the connection. Cannot proceed."

failed to query tcp/ip settings of the connectionClick to expand...

what did you do when this occurred?

Describe network equipment {modem, router} ISP, and your system.

Connect it all together, get a command prompt, enter ipconfig /all >myTcp.txt
and come back here and paste the contents of myTcp.txt as your reply
 

http://www.techspot.com/community/topics/failed-to-query-tcp-ip-settings-of-the-connection-cannot-proceed.177223/
Relevancy 50.74%

Hi my daughter tried to adjust the resolution and now the screen is Black and stuck on Out Of Range. I cannot even get it safe mode or anything. Just a black screen with the writting. It's a windows xp 32. My son is so sad if anyone knows what to do please help. Thank you.
 

A:PC monitor screen is black & says "Out Of Range"

Repeatedly press F8 while the system is booting.. The very first stuff you see on screen will either be your motherboard splash screen or some text. When you get to the menu where you can make a selection, choose VGA mode NOT Safe Mode. That will boot your computer at 640x480, but it will boot with full driver support, just as if things were normal. Change the resolution to what you want after that.

Remember if you change it to something that goes 'out of range' DO NOT touch anything for 15 seconds. It will revert back to what it was after that time and you can try again.

Unrelated.. Go to school at UMR? or different Miner?
 

http://www.techspot.com/community/topics/pc-monitor-screen-is-black-says-out-of-range.210867/
Relevancy 19.78%

A while ago, after accidentally opening the Store app, Windows forced me to restart to install Windows 8.1, which I was unable to weeks before because of driver issues. I didn't need Windows 8.1 yet, so I didn't download it before then.

However, during the installation, it failed (again) due to either my antivirus or the aforementioned driver issues. Upon logging back in, my computer was unable to find any WiFi networks. Seeing as I live in the middle of a densely populated city, this isn't possible. Plugging in an ethernet cord still works, so no issues with that adapter or my home internet. I checked all the drivers for my WiFi adapter, and my Ethernet adapter, and both are up to date and display as working properly. Restarting several times didn't seem to fix this issue, and using system restore didn't seem to work either. I used the Troubleshooting tool, and that didn't give my any helpful advice or answers, so I got nothing.

What can I do to fix this issue?

For reference, I have a Broadcom 802.11ac Network Adapter, Driver Version 6.30.95.14, and a Qualcomm Atheros AR8151 PCI-E Gigabit Ethernet Controller, Driver Version 2.1.0.7.
 

A:Unable to connect to WiFi after failed Windows 8.1 update

Never mind, it seems to have resolved itself overnight after I put it to sleep for several hours.
 

http://www.techspot.com/community/topics/unable-to-connect-to-wifi-after-failed-windows-8-1-update.210268/
Relevancy 18.92%

With Broadwell and Skylake desktop CPUs expected to launch next quarter, the urge to upgrade my computer has never been stronger.

Read more
 

A:Weekend Open Forum: What CPU powers your computer?

Got an i5-2500k in my gaming computer, and a C2Q Q8200 in my home server. Because of the small enclosures they are in I have not overclocked them, with the watercooled 2500k being in a Prodigy case stuffed to the gills, and the Q8200 is in a 2U rack case.

Not sure about the server, but I know with Star Citizen in the distant horizon, I'm very compelled to upgrade around the end of the year. This is driven less by my CPU and more by my graphics card (watercooled GTX 570) and memory, which I only have 8GB.

edit: oh yeah, and my XPS 12 has an i5-4210.
 

http://www.techspot.com/community/topics/weekend-open-forum-what-cpu-powers-your-computer.208477/
Relevancy 18.49%

A factory AMD or Intel heatsink is something I simply won't consider when building a computer. I acquired my first aftermarket cooler 15 years ago to assist in overclocking an AMD Athlon 500 (it reached 800MHz with help from a...

Read more
 

A:Weekend Open Forum: What heatsink / water kit cools your computer?

Mine is water cooled. Except instead of liquid its solid. And instead of water its aluminum. And instead of a pump its got a fan. Its actually a laptop.
 

http://www.techspot.com/community/topics/weekend-open-forum-what-heatsink-water-kit-cools-your-computer.209240/
Relevancy 50.74%

For the past month, Nvidia has faced its fair share of bad PR thanks to the GeForce GTX 970's memory allocation issue. As has been uncovered by users and explained by Nvidia, the GTX 970's last 512 MB of VRAM...

Read more
 

A:Nvidia CEO says GTX 970 memory controversy "won't happen again"

Again: the performance didn't change overnight; it's today the same performance than the advertised on launch date. Even that technicality can kill the case. Specifications were the "misleading" part.
 

http://www.techspot.com/community/topics/nvidia-ceo-says-gtx-970-memory-controversy-wont-happen-again.209149/
Relevancy 51.6%

As you've probably heard by now, Nvidia is having a few issues with their GeForce GTX 970 graphics card. In response, AMD has lowered the price of the card's main competitor, the Radeon R9 290X, in an attempt to get...

Read more
 

A:AMD cuts Radeon R9 290X price amid GTX 970 "issues"

Meaning AMD could have been selling the card cheaper this whole time.

AMD needs to stand more firmly in their business decisions. Changing prices on a whim every time the wind blows, shows lack of confidence in their product to sell itself.
 

http://www.techspot.com/community/topics/amd-cuts-radeon-r9-290x-price-amid-gtx-970-issues.208450/
Relevancy 23.65%

Hi,

Kindly advise how can I avoid the control and traffic limit set on the TP LINK router by the admin ? We are not operating through servers.....just a router and switch. The purpose is I can download without identifying its my PC.
 

A:Avoid Bandwidth/traffic control on router

avoid the control and traffic limit set on the TP LINK router by the adminClick to expand...

Be a good Net citizen and play by the rules. Techspot does not knowingly support hacking or hackers and bypassing the settings of an admin is hacking.
 

http://www.techspot.com/community/topics/avoid-bandwidth-traffic-control-on-router.208237/
Relevancy 23.65%

Hello there,
You can't buy these any more, and there's nothing on ebay.
Anyone have any ideas or one to sell. please let me know!
-Lisa renee
 

http://www.techspot.com/community/topics/need-control-pod-for-altec-lansing-fx4021-speaker-system.207745/
Relevancy 51.6%

I have a mystery on my hands. I received a Bluetooth speaker as a gift. The BT-4.0 adapter plugged into my computer (USB-2.0 port) detects it (as a "Bluetooth headset"), but when I try to select it as my output device (from the "Sound" Control Panel), Windows reports it as "Disconnected".

If I open "Devices and Printers" and right-click the "Bluetooth headset" icon, I get an alert that the device "Failed to initialize".

I've tried rebooting, tried a different BT adapter, updated my BT drivers off the makers' website, Device Manager shows everything is connected & working (including "Bluetooth Audio").

64bit Win7 Home. Inateck BT-4.0 usb adapter. Speaker is a "MicroBoom" BT v2.1:
Any ideas?

PS: Eliminated the obvious. Speaker is fully charged and works just fine with my phone.
 

http://www.techspot.com/community/topics/bluetooth-headphones-paired-but-disconnected-failed-to-initialize.207624/
Relevancy 20.21%

This all started after I reset the router putting in new pass code I m using same name of the old SSID When you click to Windows SSID was to unable connect on the wireless network connection on the name of my SSID on connect it saying Getting information from SSID this sounds like Windows was unable to connect to SSID good thing that windows can see the router and talk to it Type in the network key same thing looks like windows can see the router and talk Windows was unable to connect to SSID to it I type in the network key and OK Than it is saying windows was unable to connect to SSID name I have set up other computers and it can connect but this one computer running windows cannot I have the pass code down on paper and other computers can connect So wrong pass code is not the case The only thing I can think of is is computers using the old profile or my network card may need to be reset When I open networking sharing center and click on manage wireless networks I removed the old profiles in the list But I m not sure if there is still some kind of conflict or the old setting still there some where Well because I m using the same SSID despite the router reset and new pass code I m not sure why I cannot connect unless Windows was unable to connect to SSID the windows thinks I m connecting to the old SSID I tried to restart the computer and no change nbsp

A:Windows was unable to connect to SSID

Force the system to forget that SSD and then reboot.
Now look for it again and enter the passphrase.
 

http://www.techspot.com/community/topics/windows-was-unable-to-connect-to-ssid.207365/
Relevancy 19.35%

My Asus DRW 24B1ST CD/DVD-Rom device works in Dos (bootCD works no problems), and is recognized by my WinXP Device Manager and listed as working properly. But when I try to run or view a disk from My Computer, all I get is a blank window. The window has the correct partition/drive identity, so I know it's pointing to the device, but it just won't interact with the disk.

The same device was working fine in a previous WinXP installation on the same computer, but when I installed another WinXP sp2 (I had lost access to the original installation) I had a few glitches and this is the remaining one that needs to be fixed.

BTW, I can bootup from a bootCD and run a miniXP and have no problem with the CD/DVD-ROM device, so the issue must be with the current WinXP installation.

Any suggestions for repairing this problem?
 

A:CD-ROM device won't open or run disk

Wow very interesting. Yo had mentioned it will boot to disc, have you tried while in safe mode. So if you restart computer and utilize the function f8 button go to safe mode with networking check to see if it works in there. If it does then I assume it is driver related issue. Of course in safe mode it loads minimum drivers to have a functioning safe environment. Even though windows recognizes it in device manager does not mean it has a working driver. I would even go as far as uninstalling the driver and reinstalling one from the manufactures website. You could first try uninstalling the driver then rebooting the computer then letting windows reinstalling the driver upon boot up to see if that fixes it first. Hope this helps let me know what you find.
 

http://www.techspot.com/community/topics/cd-rom-device-wont-open-or-run-disk.206972/
Relevancy 51.6%

Hello It may seem like a simple problem but I know nothing of the subject and I ve had the problem for ages Whenever I copy large files Movie size think MB the copy progresses very remaining" drives "5 sec Copying to/from stuck before for flash on 30 finishing seconds fast MB s until it reaches about where it gets stuck for about seconds to a minute and it says quot Time remaining seconds quot during all that time I have this problem with any flash drive in any USB port amp It also happens when copying to network drives and external harddrives which leads me to think it s a software windows issue Some vital information Copying to/from flash drives stuck on "5 seconds remaining" for 30 sec before finishing The flash drive I mainly use is USB quite new and easily capable of MB s writing speeds It reaches about - MB s during the copy until the final point where it still says MB s but does nothing for seconds USB port is also and I ve also tried every single other port in my computer None are broken and none ever show any signs of being slow The flash drive is NTFS formatted but it used to be FAT I ran checkdisk to see if there was anything wrong but there wasn t It s NTFS since I occasionally need files gt GB I tried using TeraCopy to bypass the issue but this way doesn t reach speeds of over MB s which takes even longer in the end It does fix the hanging at issue I tried converting the drive back to FAT which removes the issue of it hanging at but again the speed doesn t go above MB s which means it takes longer in the end making it not worth it What bothers me is that the files transfer at the maximum speed right until the very end where it just magically gets stuck for seconds or more before finishing like nothing happened Please advise P S I shamefully have to admit I never safely remove my hardware nbsp

A:Copying to/from flash drives stuck on "5 seconds remaining" for 30 sec before finishing

Marty9231 said:





Hello!

It may seem like a simple problem, but I know nothing of the subject and I've had the problem for ages.

Whenever I copy large files (Movie size, think 700MB+), the copy progresses very fast (~100MB/s) until it reaches about 99% where it gets stuck for about 30 seconds to a minute, and it says "Time remaining: 5 seconds" during all that time.

I have this problem with any flash drive, in any USB port (2 & 3). It also happens when copying to network drives and external harddrives, which leads me to think it's a software/windows issue.

Some vital information:

The flash drive I mainly use is USB 3.0, quite new and easily capable of ~150MB/s writing speeds. It reaches about 120-130 MB/s during the copy until the final point where it still says 130 MB/s but does nothing for 30 seconds.

USB port is also 3.0, and I've also tried every single other port in my computer. None are broken, and none ever show any signs of being slow.

The flash drive is NTFS formatted, but it used to be FAT32. I ran checkdisk to see if there was anything wrong, but there wasn't. It's NTFS since I occasionally need files >4GB.

I tried using TeraCopy to bypass the issue, but this way doesn't reach speeds of over 20MB/s which takes even longer in the end. It does fix the 'hanging at 99% issue'.

I tried converting the drive back to FAT32, which removes the issue of it hanging at 99%, but again the speed doesn't go above 20MB/s which means it takes longer in the end, making it not worth it.

What bothers me is that the files transfer at the maximum speed right until the very end, where it just magically gets stuck for 30 seconds or more, before finishing like nothing happened.

Please advise!!

P.S.: I shamefully have to admit I never safely remove my hardware. Click to expand...

Although I've had the same happen on my downloads, this "P.S.: I shamefully have to admit I never safely remove my hardware." could be part of the problem, good luck.
 

http://www.techspot.com/community/topics/copying-to-from-flash-drives-stuck-on-5-seconds-remaining-for-30-sec-before-finishing.207001/
Relevancy 20.21%

So I have a very strange issue with my laptop.
It's a Toshiba a665-06f
I7 [email protected]
8gb ram
500gb Samsung ssd
Running Windows 8.1 pro

I can't get into the bios it boots in less than 10 secs, I've even tryed removing the hdd to get it to boot to the bios but it just sits at a blank screen when I do that. I've tryed tapping the all the f keys the del and esc on start cant get into the bios or even the boot options. Other than not booting into the bois it works great.
Any ideas please?
 

A:Unable to access bios

"Other than not booting into the bios, it works great"... So this means you can boot into Windows normally, and use the laptop?
 

http://www.techspot.com/community/topics/unable-to-access-bios.206928/
Relevancy 19.78%

The (Tp internet connect to 740n) router link via Unable to router worked fine in the past until recently my ISP had a break in the cable line and repaired it Now I am unable to connect to the internet If Unable to connect to internet via router (Tp link 740n) I connect the ISP s LAN cable directly to PC windows and do the following steps Control panel gt View network stats and tasks Setup a new connection or network gt Connect to the internet gt Next Broadband PPPOE gt Next Type in username password gt Connect Internet works fine This means there is no problem with the internet connection However if I connect the ISP s LAN cable to the quot blue quot port of the router and the short LAN cable to my PC then do the following steps Open http tplinklogin net It shows me router config page Click Quick setup gt Next Select PPPoE gt Next Type in username password gt Next Leave the Wireless Page untouched gt Next Click Reboot Wait till router reboots It does not work the router page shows quot Connecting quot but does not connect at all Here s the router log TL-WR N System Log Time - - s H-Ver WR N v S-Ver Build Rel n L M W PPPoE W M G st day OTHER INFO User clear system log st day PPP NOTICE PPPoE start connecting st day PPP NOTICE Standard authentication st day PPP INFO pppd start st day PPP INFO sent PADI Host-Uniq x st day PPP INFO sent PADI Host-Uniq x st day PPP INFO sent PADI Host-Uniq x st day PPP ERROR Timeout waiting for PADO packets st day PPP NOTICE Standard authentication st day PPP INFO pppd start st day PPP INFO sent PADI Host-Uniq x de st day PPP INFO sent PADI Host-Uniq x de st day PPP INFO sent PADI Host-Uniq x de st day PPP ERROR Timeout waiting for PADO packets st day PPP NOTICE Standard authentication st day PPP INFO pppd start st day PPP INFO sent PADI Host-Uniq x d st day PPP INFO sent PADI Host-Uniq x d st day PPP INFO sent PADI Host-Uniq x d st day PPP ERROR Timeout waiting for PADO packets st day PPP NOTICE Standard authentication st day PPP INFO pppd start st day PPP INFO sent PADI Host-Uniq x st day PPP INFO sent PADI Host-Uniq x st day PPP INFO sent PADI Host-Uniq x nbsp

A:Unable to connect to internet via router (Tp link 740n)

Please help me
 

http://www.techspot.com/community/topics/unable-to-connect-to-internet-via-router-tp-link-740n.206843/
Relevancy 51.6%

Please help.. Can't connect to the wifi but using ethernet is working fine.. My phone could connect to the same wifi though
tried to backread some of the threads but didn't work on my laptop
 

A:Cannot "fully" connect to wifi but works fine on ethernet

Additional info. I am using Atheros AR5006EXS Wireless Network Adapter
and I did deleted the driver and it installed again automatically, but sadly it still doesn't work
 

http://www.techspot.com/community/topics/cannot-fully-connect-to-wifi-but-works-fine-on-ethernet.206650/
Relevancy 50.74%

I've been having an issue which started this morning. The previous night, I forgot to plug in my Dell Inspiron N5050 after using it. I woke up to find that my battery had died (obviously). I plugged in the laptop, running Windows 7 HE 64 bit, and turned it on. It booted normally and I was able to do all of my tasks as needed. Then I noticed my problem. The battery icon down on the taskbar showed that the device was plugged in, but was not charging. It has stayed at a constant 2% charge for more than 24 hours now. The Battery Meter stated that my battery is performing normally, so I ruled the battery out as the cause. The adapter I am using is the default one that came with the laptop when I bought it, and it appears to be functioning normally as well. What could be the cause of this incident, and what can I do to fix it?
 

A:Battery Stated as "Plugged in, Not Charging"

Most likely you have a bad battery. Dell has had whole series of batteries that they shipped out in a not fully functional state. I have an HP laptop (about 8 years old now) that the battery took a "steamy one" and it will no longer charge properly. You can try this trick (it may not work, but worth a try because did work for me a couple times): power down laptop and take the battery out for 30 minutes; replace battery and plug in charger but do not power on; wait 4 hours of charge and power on. I had it work a couple times that it gave a full 100% charge. Again, if it doesn't work then sorry, but at least you tried.
 

http://www.techspot.com/community/topics/battery-stated-as-plugged-in-not-charging.203683/
Relevancy 20.64%

I'm attempting to connect my laptop to my Wi-Fi but I'm having problems. I'm able to connect other devices with no problems, but when I try connection my laptop I get a "limited connection" message with a yellow triangle. Someone please help!! Tell me what info about my laptop you need from me.
 

A:Unable to connect to Wi-Fi

"Other devices"? Do you mean other WiFi networks? If so, then reboot your router. Also make sure your laptop's wireless can handle what your router is outputting (ac, n? 2.4vs5.8Ghz).
 

http://www.techspot.com/community/topics/unable-to-connect-to-wi-fi.205919/
Relevancy 49.88%

I used RV042 10/100 4-Port VPN Router. I've configured the dual WAN, and enable Load Balancing for faster internet. But if I accessedhttp://ipchicken.com/ my IP Address is always chaging? How can I setup the router sticking to just one IP address?
 

A:How to "Load Balance" without changing the IP?

Let me preface by saying....taking two circuits and using them at the same time, even with protocol management from the LB is most likely not worth the effort.

But for the sake of the argument, the first hurdle you have is that both circuits need to have static IPs. What type of connections are they?
 

http://www.techspot.com/community/topics/how-to-load-balance-without-changing-the-ip.205897/
Relevancy 20.21%

I've never come across this and need a few more heads on this. All of a sudden this evening I am unable to upload to the internet. I've tried uploading to Facebook, gmail, and drop box all with a laptop, galaxy tab, HTC one phone, ( these three on wireless internet) and our hp desktop (hard wired). I can download from each program with all devices as well as browse internet and play YouTube videos. I've rebooted each device. Rebooted modem, router, as well as removed the router from the equation. I had my local isp (Wow! Internet) reboot their end twice. They say they have no problems in our area and it's not on their end.... Anyone ran across this or have any ideas?
 

http://www.techspot.com/community/topics/unable-to-upload-can-download.205781/
Relevancy 34.83%

Dell is releasing a new 5K monitor in Q4 this year. That's your ideal 2560 x 1440 quadrupled for retina effect, while keeping the perfect proportions, with the software that supports it that is, for the total of 5120 x 2880 madness.
 

A:Dell 27" 5K Monitor

VitalyT said:





Dell is releasing a new 5K monitor in Q4 this year. That's your ideal 2560 x 1440 quadrupled for retina effect, while keeping the perfect proportions, with the software that supports it that is, for the total of 5120 x 2880 madness.Click to expand...

And I thought 4K was crazy high resolution already xD.
 

http://www.techspot.com/community/topics/dell-27-5k-monitor.205015/
Relevancy 48.16%

Hi, when I typed " dxdiag " it said n/a, last time I checked there was something written in it..
 

A:When I typed " dxdiag " it said n/a

Check your graphics drivers and install the latest one.
 

http://www.techspot.com/community/topics/when-i-typed-dxdiag-it-said-n-a.204746/
Relevancy 20.21%

One of my hard drives just failed after years of reliable service. A lot of valuable information was lost.

To avoid this in the future, it would be helpful to know just how old a drive is to know when it's time to be replaced.

Is there a program that can tell me when I drive was manufactured?
 

A:A program that shows Manufacture date?

Drive age doesn't really have much to do with 'drive failures'. Time in service increases the risk, but it's not a defining factor either.

The HDD should have a sticker on it showing date of manufacture. I don't know of a program.
 

http://www.techspot.com/community/topics/a-program-that-shows-manufacture-date.204415/
Relevancy 34.83%

My sister's 13" MBP (2011) died a few hours ago. According to what she told me, she was using it, and then, poof, black screen and no power. She doesn't have the cash at the moment to have it properly checked by a tech, so I did a basic troubleshoot in an attempt to narrow things down.

While the internals are a bit dirty, I didn't see any obvious signs of physical damage (it was relevant to check for this). Furthermore, the machine doesn't seem to respond to any power sources. I tried a couple different power cables and, while the little amber light on the magsafe (sp?) tab will come on briefly, the computer with neither power on nor display a charge on the built-in charge indicator. I will also note that the machine failed while disconnected from an outlet source with a full battery indicated.

My initial conclusions are a) the computer fried itself or b) the battery is toast. Any suggestions?
 

A:2011 MBP 13" Won't Power Up

If no one here can offer any insight, I would post this to the Apple discussion forum. There are usually people there that can diagnose this from just a description so that is your best bet.
 

http://www.techspot.com/community/topics/2011-mbp-13-wont-power-up.204013/
Relevancy 20.21%

Recently sound has not been coming through my speakers, so I tried to plug in headphones and headset but no further luck. I then went into control panel then sound and check the settings on my playback and nothing was touched or muted etc. I then went to the Speakers and Headphones in sound right clicked and pressed test and it said "The device is being used by another application. Please close any devices that are playing through this device." but no other applications that I could find that would be using it. My prediction is that having no internet protection for a while and downloading off the internet has caused a virus to cause my audio to become mute, if this is so how would I be able to find this application causing it. AVG isnt picking it up.
 

A:No sound caused by a Virus/Program?

Broni, from the Virus and Malware Removal forum doesn't think it is malware related.
 

http://www.techspot.com/community/topics/no-sound-caused-by-a-virus-program.203961/
Relevancy 34.4%

I'm wondering whether I can overclock my ASUS R500VD notebook it has an INTEL sandy bridge core I5 3210M 2.50 GHz processor 4GB (max 8) of ram running puppy linux and windows xp home edition SP2 32 bit I have benchmarked it and ill email the results to anyone who replys and gives me their email and if you're wondering why I'm running windows xp read my article in the Alternative OS section of the forums called "If all else is too hard try puppy linux" bye
 

A:Can I overclock my asus notebook 17"

Nope sorry, the I5 3210M isn't OC enabled.
 

http://www.techspot.com/community/topics/can-i-overclock-my-asus-notebook-17.202019/
Relevancy 24.08%

I have a kenwood kdc-x798 and 2 12'' inch kickers powered by a kicker zx750.1

the rca ports on the deck read from top to bottom
sw
front
rear

and on the amp it only has input and output rca ports

my subs only work on the front rca port on the deck
and on this port I cant control my sw gain (-15 to +15)
and I cant turn them off on the deck neither even though there is
the option to. I can change sub output with the bass control though

on the sw rca port the subs just don't work even though all the settings are set
to have them on and working (that I know of)

please help, I like subs but not all the time
 

A:Can't control my subwoofers through my deck

Car http://www.kenwood.com/usa/car/excelon/kdc-x798/ or home?
 

http://www.techspot.com/community/topics/cant-control-my-subwoofers-through-my-deck.203644/
Relevancy 34.83%

Hi all,
I have an Acer Aspire Z5610 AIO computer.When I first bought it a few years back the @ and " were transposed.Hit the @ and " would come up and vice versa.At the time I contacted someone (can't remember who) and with their advice I was able to correct the problem.Due to age the PC was running v.slowly,painfully so.I decide to revert back to Factory default settings,unwisely it turns out,but the old problem of @ and " transposition is back.Has anyone out there got a solution to this problem.It is fixable as I have done it before,but how !!!
Thanks in advance,
Frank.
 

A:Keyboard @ and" are transposed

It's not really a problem particularly as you know which keys to press to get @ or ". This is one of the few differences between UK and US keyboard layouts. You can change the English language version from one of the options in Control Panel.
 

http://www.techspot.com/community/topics/keyboard-and-are-transposed.203000/
Relevancy 25.8%

So I have windows 7 installed on my pc ..... I cant hear any sound from my headphones or speakers whether plugged into the front or rear panel. and also windows shows that there are headphones plugged into the front panel. maybe that's the reason I cant hear any sound....but I tried all possible ways....also disconnected the front panel from the motherboard but still it says its connected.
 

A:Front audio jack panel wont disconnect in any way

Have you checked out the Sound section in Control Panel. Also check Device Manager.
 

http://www.techspot.com/community/topics/front-audio-jack-panel-wont-disconnect-in-any-way.202869/
Relevancy 19.78%

As the title says I'm trying to connect my HP3050 printer to my computer wirelessly. Problem is I get this:


The story goes that in the past week or so we swapped to a different internet provider and have swapped out the old modem/router for one that the new company has provided.
Prior to this no problems at all.

How do I counter this, I.e. remove the problem of what appears to be the availability of two routers, the new and the old?

Thanks,
Tom.
 

http://www.techspot.com/community/topics/unable-to-connect-my-hp3050-printer-wirelessly.202822/
Relevancy 19.35%

Hi,

I'm hoping someone will be kind enough to help with a problem. I am connected to my internet network on my PC through an Ethernet cable, but cannot access the internet through a browser or anything else. This is the second time this week this has happened. I had a separate PC issue early this week which caused me to reinstall windows. I have had the issue with connecting to the internet occur twice now since reinstalling windows, both times after installing windows updates. I resolved the first occur acne by having my ISP come out. I do not know what they did to fix the problem, only that the router was not the source, and he changed something while logged into the modem settings. Any help would be appreciated.
 

A:Cannot open web page, connected to router

First get a command prompt and then issue these to commands
ping 8.8.8.8
nslookup www.google.com

both should give some answers, neither should timeout or show errors
 

http://www.techspot.com/community/topics/cannot-open-web-page-connected-to-router.202181/
Relevancy 51.6%

Hi I have an older PC which I gave to my mum It originally ran Vista but I bought and installed Windows Ultimate around weeks ago after it had been inactive for months It was running great but a couple of weeks ago it just started hanging for no real reason Also at startup it would say that the computer had not been shut down properly even if it had This was only when it was switched off at the wall not after checksum defaults loaded" replaced error battery after - "cmos a restart or when the PC was left plugged in and switched on She only "cmos checksum error - defaults loaded" after battery replaced uses the PC to look at You Tube and some webcams from her grandkids and that s it she s not very computer literate Initially I left Windows repair to run overnight but when I looked at it the following morning it was still in the repair screen so I assume it had hung I spoke to a local repair shop and they suggested I test the RAM test the hard drive and replace the CMOS battery The RAM and hard drive checks went without any errors and after I replaced the battery the hanging stopped I played with the computer all evening and shut it down as normal and switched it off at the wall Next day I thought I would start it up just to check it and I was faced with a quot cmos checksum error - defaults loaded quot message I thought that was strange but maybe the battery was dead so I swapped it over with one from my perfectly working desktop to try it out and my desktop worked fine but after shutting down my mum s one it had the same problem when power was pulled So battery was ruled out Incidentally I will say that I reset the BIOS date and time every time I was faced with the error following up with a save and exit It worked fine until I unplugged the computer I then moved on to the BIOS and set it back to default and the same again After this opened the case and used the jumpers to reset the BIOS to default again but no difference My mum will not leave it switched on at the wall constantly in case it self-combusts same with her washing machine TV lamps etc otherwise I would just do that and ignore it Is there anything else someone can suggest that I try System Shop bought by Mesh Motherboard is an ASUS PSN-E SLI gb Ram - samsung gb hard drive - ASUS Thanks for any help nbsp

A:"cmos checksum error - defaults loaded" after battery replaced

I must add that the PC is the same as when I bought it new from the shop, except for adding a Creative Labs sound card (approx 2012) and installing Windows 7 (around 6 weeks ago). All Windows updates are downloaded and installed.
 

http://www.techspot.com/community/topics/cmos-checksum-error-defaults-loaded-after-battery-replaced.201304/
Relevancy 50.74%

My dell 1905fp finally crashed after a lot of years. I'm not a gamer, but I was very happy with that monitor.

Of course they no longer make it, and I understand refurbished monitors of this type are not necessarily a good option.

I can't seem to find reviews or comparisons which point the way to other similar monitors. I'm retired and just can't afford the $600 and way up price of what I've seen so far.

I just need a basic monitor with VGA and DVI, but would like the screen performance to be decent, incl for watching movies etc.

Any recommendations, and where to get a reasonable price? Again, don't want a wide screen.

Thanks much!
 

A:Reasonably priced 19" or 20" monitor, not wide-screen?

Nothing wrong with buying refurbs. They may have a few blemishes in the frame but nothing serious to keep them from functioning. I've bought a few myself and have had no issues with them. Although the monitors I bought were 20" widescreens that averaged $120 or less. For what you need/want, I wouldn't spend more than $150.

I know you said no widescreen, but movies do view better on widescreen.

http://www.amazon.com/Dell-UltraSharp-1905FP-Rotating-Landscape/dp/B00091R6KC - less than $100
 

http://www.techspot.com/community/topics/reasonably-priced-19-or-20-monitor-not-wide-screen.201641/
Relevancy 33.11%

I have networked PCs before many times successfully so this is not my first time trying to network PCs in a home environment Though I m wondering if Windows is part of the problem I would have thought that for sure until one of the name credentials bad password? user with unknown even correct failure: or "Logon new laptops running W would not connect to any of the other three PCs Laptops running W Yet these other three W PCs Laptops CAN connect to this laptop Then it gets a little more "Logon failure: unknown user name or bad password? even with correct credentials interesting this same laptop that couldn t connect to those three W PCs Laptops CAN connect to a Windows desktop and a XP Laptop and those two can also connect back to it without issue It s almost like my network is divided in half and only half can talk to each other But then when I thought it couldn t get any more interesting I realized the first three W PCs Laptops can talk to the others it s just that the others W Laptop W Desktop XP Laptop can t talk back to them without getting the error quot Logon failure unknown user name or bad password even though the username and password are correct I don t fully understand this error because on the surface it s just WRONG My username and password are correct but it appears something somewhere is interfering or hijacking the authentication process Three of the computers laptops are brand new just purchased last week and setup this week The HostPC is also fairly new just purchased last month I am not using a HomeGroup and have removed all computers that were part of a HomeGroup I have enabled file sharing and network discovery and enabled Use user accounts and passwords to connect to other computers on all PCs I have DSL and am using the wireless modem provided by my ISP which has router functionality built into it It is a Sagemcom Model F ST N All computers are connected wirelessly Time is correct on all PCs I cannot use Group Policy since they re all Standard or Home edition DHCP is enabled and all computers are on the same subnet using the x range of ip addresses The six computers are as follows I figured this may make is easier to visualize the layout HostPC HP Desktop W PC Name DrsBlend U N DrsBlend p w not showing my real password PC HP Laptop W PC Name DrsBlend- U N DrsBlend P W PC HP Laptop W PC Name DrsBlend- U N DrsBlend P W PC HP Laptop W PC Name DrsBlend- U N DrsBlend P W PC HP Desktop W SP PC Name DrsBlend- U N DrsBlend P W PC Dell Laptop XP SP PC Name DrsBlend- U N DrsBlend P W Every PC stated above has the same user name and password and is logged-in with the username DrsBlend and the password The quot Logon failure unknown user name or bad password happens when trying to access HostPC PC or PC from PC PC or PC The HostPC can see and connect to all the PCs but only PC and PC can talk back or access the HostPC It s like the HostPC and PC and PC are in their own little clique and can talk back and forth to each other Those three PCs can also talk to PC PC and PC as well but PC PC and PC cannot talk back to them HostPC PC PC Profile corruption I would have entertained that thought but the fact the first three PCs can access and talk to one another kind of defeats that idea and the fact the PCs were just recently setup Firewall Disabled and disabled TrendMicro with no change With them on off the first three PCs can still talk to each other and the rest of the PCs Anyone have any additional suggestions nbsp

A:"Logon failure: unknown user name or bad password” even with correct credentials

I experienced a similar problem when I was trying to network my 8.1 machine the host network. As you say the host PC can see and connect to all of the machines, but not the other way around. Not sure if it is the same in your situation but I found that Microsoft's idea of network sharing on the Windows 8 class of OS differs greatly from previous OS's in that you can connect to it from an external host, but when trying to do the other way around it doesn't "see" the PC in question due to differing network sharing protocols included in the OS.

Anyone feel free to correct me if I am wrong, I am speaking only from what happened with my network.
 

http://www.techspot.com/community/topics/logon-failure-unknown-user-name-or-bad-password%E2%80%9D-even-with-correct-credentials.201313/
Relevancy 33.97%

So newegg is offering the Acer 29" B6 B296CLbmlidprz IPS monitor for about 350. Seems like a pretty good deal but I can't find many reviews on it. I was wondering if anybody had any experience with this monitor and/or if you guys have better options for someone who is looking for an IPS monitor below 400 bucks. I want to game with it as well as do some 3d modeling and photoshop work. So I need reasonable response time for gaming. I was also looking at the HP ZR2440w and was gonna get that until I saw this deal on newegg for a larger monitor. 24" models are fine but if there are good deals on some 27" inch ones then I would be interested in those as well. Any suggestions? Thanks.
 

A:Question on Acer 29" monitor and other monitors

Heres the link for that monitor.
http://www.newegg.com/Product/Product.aspx?Item=9SIA24G1GC2421
 

http://www.techspot.com/community/topics/question-on-acer-29-monitor-and-other-monitors.201698/
Relevancy 20.21%

I have downloaded a program called Anomos, it tells me please forward your ports so the program can work, 5061. Ok so I go into my century link modem and it wants a ip address to forward the ports what ip address do I enter?
 

A:How do I port forward the Anomos program?

The LAN address of the system you want the data to go to.

It must always be the same address, so you need to make it so using
Address Reservation on the router OR a static address on the target machine (not recommended for laptops).
 

http://www.techspot.com/community/topics/how-do-i-port-forward-the-anomos-program.201628/
Relevancy 20.21%

I bought a Samsung 840 SSD (120GB) for my gigabyte GA-770T-USB3 motherboard. I am unable to install win 7 64bit on it. It is a SATA SSD.

I have tried ACHD mode in the BIOS, I have tried IDE mode. The drive works as I have tested it as an external drive on other computers.

I bought the drive specifically to be used as a primary drive.

My regular hard drives work fine on the motherboard.
 

A:Unable to install SSD on Win7 x64 system

Well, first of all, your motherboard only supports 3GB/s and the 840 is a 6GB/s drive. Just by that you won't really get your moneys worth. And how so are you unable to install? Also can you please list your system specs?
 

http://www.techspot.com/community/topics/unable-to-install-ssd-on-win7-x64-system.190141/
Relevancy 20.21%

I have a laptop with the Realtek high definition audio and Dolby home theater installed. After the latest win8.1 update the Realtek program has stopped forwarding the sound through the Dolby program (which it managed to do perfectly before the upgrade). I tried using Viper4Windows too but that didn't work eighter. Is there an option anywhere that will allow me to fix this?
 

A:Realtek and third party program problems

Are there any yellow (!) in the device manager?
 

http://www.techspot.com/community/topics/realtek-and-third-party-program-problems.200237/
Relevancy 51.17%

I just got new SSD - Transcend 128GB. Installed Windows. When I cold boot my PC -- from a shut off state -- I get this message before Windows loads: "Reboot and select proper boot device or insert boot media in selected boot device and press a key."

However, if I press Ctrl+Alt+Delete and reboot I come into Windows.

If I enter BIOS from cold boot, it does not detect my SSD. After rebooting it detects my SSD. Seems like the SSD is slow at firing up?

I have run chkdsk and memory test without any errors.

My motherboard is the MSI Z87-G55.
 

A:"Reboot and select proper boot device"

Just installed newest BIOS, it didn't help.

When I go into Board Explorer in BIOS it says SATA port 1 is empty. After reboot it says the same port is occupied by my SSD.

Update: Plugged in another hard drive (non-SSD). Same rules apply to it. On cold boot, none of the drives are detected. After reboot, both drives are detected. I used a non-SSD as system drive before this, worked perfectly.
 

http://www.techspot.com/community/topics/reboot-and-select-proper-boot-device.200351/
Relevancy 18.92%

We have a new Dell Precision laptop but cannot get two of our USB flash drives (both Lexar Jumpdrive SecureII Plus) to work. They work on our other computers. We can connect other USB devices to the new laptop, including an older flash drive. Strangely, if the problem drives are plugged in before the computer starts they will open properly - but I cannot remove them and plug them in again later.

They do beep every so often. USB Mass Storage shows up in Device Manager, with the warning exclamation. Disk Management will briefly show a disk (1 or 2) with "no media"; sometimes it will disappear then reappear for a second or so.

I have checked for USB driver updates, uninstalled and reinstalled USB hubs shown in Device Manager (though I'm plugging directly into the side of the laptop). I do not understand what would cause these drives only to not work with this computer only.
 

A:Some usbs drive fail to open on newest computer only

I forgot to mention: the laptop is running Windows 7 Pro.
 

http://www.techspot.com/community/topics/some-usbs-drive-fail-to-open-on-newest-computer-only.199812/
Relevancy 33.97%

Recently my network storage device has stopped me from accessing folders with the exception of music. All my pictures for the last 11 years are on it and not backed up anywhere else. Cannot find manual and have done reset but cannot remember URL to setup or admin username and password. Doesn't seem to be online and Edge is giving me no help whatsoever.
 

A:Edge DiskGo 3.5" network harddrive

Ouch if this is a NAS Device or has an IP you can use an app called FIng for your mobile device to find its ip so you can put it in the browser and get to the gui site. If you cant try fing you can use angry ip scanner for winwdows to find its ip.

If you want to try and recover files I would try recuva to obtain any data that has been lost. I am not sure if it is lost or just changed in the mapping.

As most guys will tell you here its very good idea to have three forms of back up. Local, external and online. If you don t know how to use fing or any of the software I duscusses please let me know. I will have links to the downloads below. Goodluck.

http://angryip.org/w/Download
For Fing just type in Fing in either google play or Itunes.
For Recuva: http://www.piriform.com/recuva/download/standard
 

http://www.techspot.com/community/topics/edge-diskgo-3-5-network-harddrive.200015/
Relevancy 19.78%

Hello everyone,

I'm using windows 7 on my pc and try to connect to my home wireless connection .
every time I try to connect and enter the password, it won't be connected.
However, I'm using my laptop and phone to connect and it worked properly.

Please help my problem
Thanks in advance
 

A:Windows 7 unable to connect to wireless connection

How is your wireless Configured. I have seen many issues when using mixed mode in certain Linksys or Cisco Products. What kind of adapter are you using on y our PC for wireless Connection? Has it ever worked?
 

http://www.techspot.com/community/topics/windows-7-unable-to-connect-to-wireless-connection.199928/
Relevancy 30.1%

My Hp pavilliin g7 series laptop running windows 7 home starts up with white screen and no beeps or sounds . Started freezing on Hp logo screen last week only sometimes. Id turn off and it would work on second try. About a year and a half ago I used laptop to preview windows 8. And after I reinstalled windows 7 it has been acting funny. Ie freezing and louder fan noise. I did recently update the bios and a pci device driver that never installed. But now it has white screen this morning. I shut off and powered up and still white.
I took off battery and pressed power for 10 sec plugged back in and still white. Still no noise.
Any ideas?
 

A:HP G7 17" screen starts up white and stays white

Try attaching an external monitor and notice what it displays...
 

http://www.techspot.com/community/topics/hp-g7-17-screen-starts-up-white-and-stays-white.199331/
Relevancy 49.88%

Operating System Windows Home Premium A few months ago I had purchased an INSTEN Composite AV Cable for Sony PlayStation and INSTEN mm Stereo to RCA Cable M F Inch Cm Black With these I connected the sound from my PlayStation through the Audio In jack on my computer This allowed for an audio transfer from PlayStation into computer and out the Speaker Jack in the back This has worked fine until February rd On February nd I had changed my W power supply for a W power supply Problem "In Audio Line" That day everything worked perfectly however the next day I heard a "In Line" Audio Problem humming and the sound was messed up I found out the cause was the power supply I changed out the new power supply for my old one Now my audio "In Line" Audio Problem is messed up I hear what sounds like an echo in the sound If I have the speaker volume set to I can hear the sound fine but only in the left speaker Any higher I hear interference and it sounds like it is being muffled The other problem is I can t play any music or sound without the Stereo Cable being plugged in Also the port is being labled as In Line in my Realtek HD Audio Manager If there is anything that I need to add let me know nbsp

http://www.techspot.com/community/topics/in-line-audio-problem.199925/
Relevancy 49.88%

Yes yet another topic seemingly on one that has been asked many times before But this is definitely different The PC Windows enterprise an mdg vxi with dual NICs one is running to science equipment with a static ip - works fine the other connects to the company network well it s supposed to It s not actually on the domain yet because the network path can never be found because of this DNS issue The Issue I can ping any site by it s IP but never by its hostname I cannot load Yet another ping but title hostname" - different "can't any sites though the browser by using the IP the browsers IE lt -- it s our standard browser right now eww Yet another "can't ping hostname" title - but different and firefox although that s not really supposed to be installed cannot load anything According to windows the card is fully connected with internet access We have tried trying different Yet another "can't ping hostname" title - but different NICs as the Yet another "can't ping hostname" title - but different secondary ones removing the secondary and using only the onboard to connect externally giving it a static IP and entering the DNS servers - we ve tried our dns servers as well as googles public ones all cmd commands that I could think of - nbtstat ipconfig flush and reg DNS fixing the host file deleting the TCP IP stack plugged in a laptop just to make sure the port was okay and everything worked I ve pretty much done anything I can think of and anything I ve read online I m sure other things were tried I just can t remember everything I ve done or my team as done as we ve been working on this for over a week on and off I am cisco certified and took network engineering in school I even called in my networking brain trust back home and we couldn t figure this out I m thinking it s something the science company that came in to set up the machine did and I am hoping it doesn t have to be re imaged as they would have to be called back in to setup the machines again Anyone that solves this will be my hero forever nbsp

A:Yet another "can't ping hostname" title - but different

Any luck with this issue?
 

http://www.techspot.com/community/topics/yet-another-cant-ping-hostname-title-but-different.163897/
Relevancy 20.21%

Hello
guys please I need your help, my laptop keep saying
Unable to connect to the proxy server what can I do to fit it please
 

A:Unable to connect to the proxy server

You are getting this message because the laptop can't find a wireless network to connect to...
 

http://www.techspot.com/community/topics/unable-to-connect-to-the-proxy-server.199618/
Relevancy 34.83%

Hi,

My wife is pestering me to buy her a 10" tablet, which she'll use for surfing, watching videos, etc, and I wondered if anyone can please help me decide a good one for her. I never really delved into tablets before, myself being more of a desktop PC person. I decided to get her something Android based because it iPad seems to have its limitations.

What should I look out for when choosing a tablet? What version of Android, processor, CPU, RAM, storage capacity and screen resolution should I be looking for, do they all take SD cards or a means of data transfer, etc. She also wants the option to attach a keyboard to it. With regard to internal storage, I heard it's partitioned on some models so apps can only be installed in one partition and the other is for photos, documents, videos, media, etc; what minimum partiton size should we be looking at for installing apps nowadays. Can anyone recommend any models we should be considering?

Thanks.
 

A:What 10" tablet for my missus?

To make this simple. What Operating System you have on your PC or your wife PC. Should stick to what you have so you already know how to use it on the tablet.

Windows Users get Windows tablet
Surface RT, Pro, 2nd Gen (remember these cost more)
DELL has one for $299 8-inch. You wanted a 10-inch.

Now some Windows users have Android tablets because at the time there was much of choice even though Windows XP Tablet and Windows 7 Tablet options where available. Android tablets were used more.

If your both are on MAC apple get the iPAD 9.7-inch 4:3 ratio tablet. They do have 7-inch again 4:3 ratio tablet.

I have one Windows 7 Ultimate 64-bit dual core 9.7-inch 4:3 ratio tablet. I use the touch pen with mine it's the same one for the iPad. Surface tablets uses digitize pen with 2 AAA batters inside.
 

http://www.techspot.com/community/topics/what-10-tablet-for-my-missus.199527/
Relevancy 24.08%

Just upgraded form my old EVGA Superclocked GTX 570 to my new Palit GTX 770 Jetstream 4Gb, had to fanny around a lot with my Antec 900 case to get the beast to fit but everything seems fine now, card idles at 30-35c. Underload at around 65c. However the overclocking/temperature control software that came with the card, Thunder Master just does not quite seem up to par with EVGA Precision. Can anyone tell me if I can continue to use EVGA Precision safely and without any adverse effects with this Palit card because I just cant seem to get to grips with this Thunder Master. For some reason it trys to allways achieve 70c.
 

A:Temperature control software

andy06shake said:





Just upgraded form my old EVGA Superclocked GTX 570 to my new Palit GTX 770 Jetstream 4Gb, had to fanny around a lot with my Antec 900 case to get the beast to fit but everything seems fine now, card idles at 30-35c. Underload at around 65c. However the overclocking/temperature control software that came with the card, Thunder Master just does not quite seem up to par with EVGA Precision. Can anyone tell me if I can continue to use EVGA Precision safely and without any adverse effects with this Palit card because I just cant seem to get to grips with this Thunder Master. For some reason it trys to allways achieve 70c.Click to expand...

My recommendation is to use MSI afterburner for your temperature controlling needs and overclocking. It is non-biased and will work with any video card no matter the type, whether its amd of nvidia, and who made it.

Link here
 

http://www.techspot.com/community/topics/temperature-control-software.199318/
Relevancy 50.74%

Hey guys, I was wondering if anyone might have an idea how to fix this.

I regularly plug in my laptop to my television to game or work and have had no issues other than some colors being slightly different. I played with the color settings and got it close, but the tweaker in me remembered reading that some people were getting more true color using the ycbcr444 color display settings. However, I didn't realize that my television does not support this format and now am unable to revert it back.

Is anyone aware of a way to do a full reset of the Nvidia control panel settings? I can't switch the color display modes for the external monitor if I do not have one plugged in, so this becomes a catch-22
 

http://www.techspot.com/community/topics/format-not-supported-plight-of-rgb-and-ycbcr444.199275/
Relevancy 34.4%

I'm looking to upgrade from my 24" 1920x1200. I tried to play games on my 55" TV and it just didn't feel right. I play mostly FPS like BF4
 

A:Does anyone here game on a 30" 2560x1600 monitor

I game on a 100Hz+ 27in 2560x1440 Qnix QX2710. The extra pixels and the higher framerates are excellent for FPS gaming, and for the price you can't get much better. A quick google will show up lots of useful threads if you're interested.

I wouldn't get a 30in 2560x1600 monitor just for gaming, they are very expensive and more aimed towards graphics/design professionals rather than gamers. Things you're paying a premium for such as a wide gamut won't be useful and indeed might be detrimental as a gaming and general use monitor.
 

http://www.techspot.com/community/topics/does-anyone-here-game-on-a-30-2560x1600-monitor.198467/
Relevancy 18.92%

I am currently trying to open my laptop so I can clean the processor/graphic card due to over heating. Though I took off all the screws off and no part seems to open... I tried looking on youtube but the models are different. Can someone please help me out?
 

A:How to open an asus laptop - a75v model?

Similar Asus models might help you even though they are slightly different. You probably have missed a screw hidden in the hard drive or memory/wifi bays...
 

http://www.techspot.com/community/topics/how-to-open-an-asus-laptop-a75v-model.198868/
Relevancy 50.74%

Hey,
I woke up on May 10th 2013 & when it started up my laptop I saw this.




I was a bit scared, but I decided to run the following programs:
Mbam (AV)
DSKCHK
Disk cleanup
Disk defragmenter
Scan disk (SCR-scanow)
AVG tuneup
AVG (AV)
MSE (AV)
Restore point.
I do not know what happened, but I have posted on several other forums, but no answer.
Thanks,
Danawesome.
 

A:Repeated "bad image" error (think it's something to do w/laptop)

Did you fix this?
 

http://www.techspot.com/community/topics/repeated-bad-image-error-think-its-something-to-do-w-laptop.198178/
Relevancy 20.21%

I am finding this problem to be a bit of a puzzler I have pc s networked together and connected to the internet through a switch and Unable the browse internet 7 to Windows then to a BTrouter all connected via Ethernet cabling None will connect to any page using IE one Unable to browse the internet Windows 7 has google chrome that will open google do a search if Unable to browse the internet Windows 7 I type in a subject but if I try to open one of the found pages it won t open them if I type in a website address same problem If I go into windows Live mail it will send and receive mails suggesting to me that internet is connected I have ran scans with Combofix and Malwarebytes which found next to nothing and booted into safe mode but still no success I can access the software on the routers so that connection is fine Have rebooted router and also changed the router for a different make and still no success both routers seem to tell me that broadband is connected This was all working OK some days ago and then all stopped working Any suggestions would be gratefully received nbsp

A:Unable to browse the internet Windows 7

Let's try this; using an Admin user login, get the command prompt and then enter:

ipconfig /flushdns
net stop "dns client"
Quit any existing browser, restart a browser and try Google again.
If you can run like this (btw: it will be slower to resolve the url), then we need to investigate youretc\hosts file. If you still can't surf the net correctly, we need to dig deeper.
 

http://www.techspot.com/community/topics/unable-to-browse-the-internet-windows-7.198415/
Relevancy 50.74%

Hello. I've got a basic problem I guess: I messed up with the Realtek microphone settings and selected "Set Default Device". I tried to fix it but I kinda destroyed my mic. - friends tell me they can hear me like I'm closer to them and they hear me worse than before. I just need to unset the Set Default Device thingy but I don't really know how.. any idea?
 

A:Realtek Microphone "Set Default Device"

Try doing a system restore to a previous time in which this was working correctly.
 

http://www.techspot.com/community/topics/realtek-microphone-set-default-device.197750/
Relevancy 23.65%

I had to format and re-install Windows XP on a Satellite A105-S4201 Laptop. I installed XP, and updated to SP3. The brightness control no longer works using Fn+F6/F7 (or any other way for that matter). It was working before the format.
I tried a couple of different Common Modules installs. This one: tc00324000b (version 6.07.03) won't even install. Gave me error message, "TVALG Driver installation has failed". And this one: SPA210 TCommon Modules-XP (version 1.00.06) installed, and had me restart, but when I tried to install the hotkey utilities afterward, it said "TOSHIBA Common Module not found! This setup will terminate." Also, I have the latest BIOS version installed (v 6.0)
Any ideas?
 

A:Fn Brightness Control lost, Toshiba Laptop

Are there any yellow (!) in the device manager?
 

http://www.techspot.com/community/topics/fn-brightness-control-lost-toshiba-laptop.197580/
Relevancy 49.88%

My external drive does not come up when plugged into any laptop or computer. It leaves a message saying it needs to be formatted. I say drive E for a second and then it never came back. How can I get my stuff out? please help.
 

A:WD external drive - "needs to be formatted before using"

Hi Cecilia. I would look through the post below and try one of the utilities for your WD drive.

http://www.techspot.com/community/topics/drive-diagnostic-utilities-compendium.7602/
 

http://www.techspot.com/community/topics/wd-external-drive-needs-to-be-formatted-before-using.197384/
Relevancy 51.6%

My TB Western Digital External hard disc is not working My laptop switched off suddenly while copying files After restarted my laptop when I try to open my External hard disc drive G I m getting the message as quot Location is not available G is not accessible The drive cannot find the sector requested quot The Properties of the drive shows as Type Local Disk File system Used space bytes Free space bytes when clicking My computer- gt Manage- gt Disk Management under Storage in left find External cannot not drive - "The requested" the is hard working disc sector side I can able to see my External hard disc drive G The "The drive cannot find the sector requested" - External hard disc is not working File System shows as quot RAW quot before it was NTFS Free as but I got around TB data Also I checked in different laptops but it shows the same error And finally I checked with quot Data Lifeguard Diagnostic for Windows quot it passed the test I m so afraid about my datas stored in the hard disc All my projects photos and many important files stored in that hard disc I dont know what the problem is I cant find any solutions in Internet Please help me to solve this problem Thanks in advance nbsp

A:"The drive cannot find the sector requested" - External hard disc is not working

Hey Allen. I would call Western Digital support and see what they say.Since you have data on it you need, I wouldn't play around with it, get some answers from the drive makers, and as is always said, have important data backed up in at least 2 different places, with at least one being to CD/DVD.
 

http://www.techspot.com/community/topics/the-drive-cannot-find-the-sector-requested-external-hard-disc-is-not-working.197220/
Relevancy 45.15%

Not sure if I'm in the right section

Just unpluged my m audio delta 2496 card to do some other repairs. After reconnecting and powering up I have no sound in Cubase ( In device setup selecting m audio delta driver I get the following Error message "audio engine error could not activate asio driver m audio delta" Now even windows system sounds don't work. Have tried re-installing 2496 driver....no go. Any suggestions would be welcome.
 

A:Error message "audio engine error could not activate asio driver m audio delta"

List any Problem devices

Make sure devices are connected and powered on
Click Start->Run, enter: msinfo32. Click the + sign next to Components to expand it
Click Problem Devices. Anything appear?
If yes, click on it, Ctrl-A to select all, Ctrl-C to copy it, Ctrl-V to paste into next post
On the other hand, if no devices are listed, tell me so
Generate and attach a DirectX report

Click Start->Run, enter dxdiag and click OK
===> If you?re running 32 bit Windows, dxdiag will launch on its own
===> If you?re running 64 bit Windows, you?ll see 64-bit DxDiag. Click it to launch the 64-bit version of dxdiag
Notice progress in lower left window corner
When done, click Save Information button and save as a text file to your Desktop
Click the Upload a File button to upload and attach the file to your next TechSpot post


 

http://www.techspot.com/community/topics/error-message-audio-engine-error-could-not-activate-asio-driver-m-audio-delta.197151/
Relevancy 19.78%

Well my cpu usage goes up to anything CPU whenever 100% open I usage or run whenever I open anything explorer or fire fox or when I try to install a program that s my pc Processor Inter R Pentium R CPU GHz GHz Installed memory GB Display adapter Nvidia Geforce GS I 100% CPU usage whenever I open or run anything tried the next but didn t succeed 100% CPU usage whenever I open or run anything to solve the problem - performed an virus scan using kaspersky and Avira - performed spyware scan using spyware doctor - performed malware scan using Malwarebytes Anti-Malware - reinstalled the OS several times tried windows seven ultimate and bit and windows xp sp bit - formatted my hard disk then installed a fresh copy of windows - checked the CPU temperature and made sure it s fine - tried removing one of my rams - tried working with the build-in VGA card instead of the nvidia one - tried restoring the BIOS default setting - even tried changing the processor itself but with an older one - and of course tried to see which progress sucks up the cpu usage and the result is that every program I open gets to of the cpu usage and yet I couldn t solve this problem wonder if any of u can help me thanks in advance nbsp

A:100% CPU usage whenever I open or run anything

Rick said:





In the Task Manager, if you were to click "Performance" and then enable "Show Kernel Times" under the "View" menu, what do you see? There should be a red line which indicates kernel times. If the line is abnormally high, then that's a good clue this could be driver related or hardware related.Click to expand...

Thanks for your reply!

I don't know if that's abnormal or not, but you can check that photo and see

sorry I couldn't post it as an image.
 

http://www.techspot.com/community/topics/100-cpu-usage-whenever-i-open-or-run-anything.163635/
Relevancy 51.6%

In Windows 8, whenever we copy any exe files to USB device/pen drive, there is an Interrupted Action dialog saying that "the file has properties that can't be copied to the new location". How to fix this issue?
 

A:Windows 8 File Copy "Interrupted Action" Issue

I missed to say that there is an easier alternative method to copy files with properties is by creating image of the files need to be copied. For example, iso, daa , bin, etc.
Even if we use alternate methods, we need an easy solution to fix the main issue without any tools or software.
 

http://www.techspot.com/community/topics/windows-8-file-copy-interrupted-action-issue.196667/
Relevancy 66.22%

Hi I m trying to play warcraft with my friend and we just got a problem which can be solved through portforwading And so I did it But still my PFPortChecker keeps telling me the messege quot Your port is not open or not reachable quot So I don t know what I did wrong I have only one router I checked it with some program which can tell me if there is a router covering my router I ve opened the settings of my router got into Virtual Servers created new chosen ports in range - applied to all tcp and udp confirmed It looks like its working but its not I ve got my firewall turned off and even so I added rules there for those ports I even turned off my antivirus Still its not working - just saying that its not open or not reachable Any ideas I ll appreciate any help and sorry for my grammar I m not from english speaking country so there might be a lot of mistakes nbsp

A:"Your port is not open or not reachable."

Okay what are we working with here?

OS?
Router?
System Specs?
System OC?
System Tweaked to the Max?
System Ports Changed or on defaults? Meaning you haven't changed anything only on the Router.
Under Services.msc did you set the UPnP to auto/start/enable

In the Router make sure you have the system set to the Port you want open and IP address should be Reserved by mac address of the NIC.

Are we using any other layered firewall software?
Are you using a Proxy?
Are you using Private Browsing?

What firewall are you using on PC?
 

http://www.techspot.com/community/topics/your-port-is-not-open-or-not-reachable.195947/
Relevancy 19.35%

When I connect my external hard drive to my computer it is recognized and shows up and everything but for some reason it can't be opened. This problem started after my brother put some wii games in there and connected it to the Wii...

I clicked on properties and it reads 0 bytes so nothing is detected when I scan it for viruses. (finishes after 5 seconds)

Even though it shows 0 bytes it still has all the data cause after this, I connected it on my wii and it has the games and on blu ray and it shows every video and photo I put in there, it's just a problem with windows...

I don't want to format it because I have like 5000 photos from trips with my family and also some pretty important documents from my dad's work.
 

A:Maxell HDD shows up but won't open

I found the answer! The Boot sector was damaged and Windows before looking for the information on the hard drive it looks for this sector. So all I had to do was to get a Linux computer and it was able to open it, it would have also worked with a Mac. Didn't lose any file I had in there.
 

http://www.techspot.com/community/topics/maxell-hdd-shows-up-but-wont-open.195674/
Relevancy 48.16%

I have an LED monitor and when I leave it powered off for an extended period of time (a few hours) and turn it back on the image 'pulses' and will sometimes force the monitor into sleep mode. If I unplug the power and plug it back in, the monitor works fine for as long as I have it on (even if it's on for hours). The same thing happens again when I power it down for a few hours or overnight.

Any ideas?
 

http://www.techspot.com/community/topics/monitor-pulsing-with-a-but.195656/
Relevancy 33.97%

Apollo Imation 500GB 2.5" HDD is not detected. Usual fixes not applicable. It can be found in Disk management as Unallocated Or Under Device mgmt as one of the Disk drives. Please help how to retrieve my information.

Thanks in advance.
 

A:Apollo Imation 500GB 2.5" HDD is not detected in Win 7

I hate to be the bearer of bad news, but it appears that since windows is seeing the hard drive, but not it's partitions - that something has messed up the file allocation table on the drive. Hopefully there's not something physically wrong with the drive. Some data recovery software should be able to "see" the data that windows cannot. I use a program called UFS Explorer ( http://www.ufsexplorer.com/index.php ) it works really well for drives that have data, but windows cannot see them. There are other data recovery programs/software out there, UFS Explorer is just what I am familiar with.

Hope this helps, take care!
 

http://www.techspot.com/community/topics/apollo-imation-500gb-2-5-hdd-is-not-detected-in-win-7.195183/
Relevancy 19.78%

Problem:
I have a PC that has to connect to a server through a modem for security reasons.
While it is connected to the modem, a screen needs to be printed.
The printer that is being used is connected to the local network.
While connected to the modem, attempting to print gives the error "The RPC server is unavailable."

System:
Windows XP Professional SP3
Printer server is Windows Server 2008
Modem is old 56k modem connected by serial port (don't think that matters)

What I've tried:
I have tried modifying the routing table to force connections to the subnet that the computer and printer are hosted on.
route -p add 10.1.0.0 MASK 255.255.255.0 10.1.61.0 METRIC 40 IF 0x2
ip for the PC is 10.1.61.53, ip for the printer is 10.1.61.22, IF 0x2 is the integrated NIC
The RPC service is running, and I have also started the RPC locator

Any suggestions what I should do next?
 

A:Unable to print to network printer while connected to modem

These are correct

ip for the PC is 10.1.61.53,
ip for the printer is 10.1.61.22, IF 0x2
but this is not

route -p add 10.1.0.0 MASK 255.255.255.0 10.1.61.0
and should not be necessary at all, if the PC gateway is on 10.1.61.x

Instead, get the output of ROUTE PRINT and post that
 

http://www.techspot.com/community/topics/unable-to-print-to-network-printer-while-connected-to-modem.195362/
Relevancy 23.65%

Hey everyone,

So I am using Windows 7 and I have been trying to open my Sound options under my Control Panel to no avail.

When I click on the "Sound" text, my Control Panel box slightly fades as if a window is going to open but no such window ever does. 5-10 minutes later, the sound controls will finally pop up. It is experiencing some kind of heavy delay.

I have been told it may be a driver issue but my drivers are relatively new (3-4 weeks old).

Let me know if you guys have any solutions.

Thanks.
 

A:Sound Control Opening With Heavy Delay

Hmm, could be a bug with the new drivers.

Try un-installing all audio devices and then re-install.
 

http://www.techspot.com/community/topics/sound-control-opening-with-heavy-delay.195146/
Relevancy 50.74%

This could sound confusing but please bare with me So I had a TB HD Sata with win I took it out and used a new SSD which I put Win on Then I hooked up a TB HD Sata as Storage Simple so far right Well now I want to get my documents Bookmarks etc off the quot OLD quot drive I figured simple like with IDE HD s but no When I hook it up as the only drive I get this message EFI Shell Version Current get do How main off Hard Data My Drive? I "former" running mode Map Cannot find required map name Press Esc in seconds to skip startup nsh any other key to continue shell id gt When I hook it up as the second How do I get Data off My "former" main Hard Drive? drive After the SSD the drive doesn t show up I tried to put it in another PC by itself but it said something like it wasn t the disk for that PC Someone please tell me there is an easy way around this I googled a bunch of stuff and tried a few things with no luck I m hoping I m just frustrated and missing the obvious Thanks for any help nbsp

A:How do I get Data off My "former" main Hard Drive?

How about unplugging ssd plug old drive back in then transfer stuff to ur 2tb once done unplug old and replug ssd ?
 

http://www.techspot.com/community/topics/how-do-i-get-data-off-my-former-main-hard-drive.194502/
Relevancy 19.78%

Hi. I use a 1tb external hard drive to store music, photos and movies. I use it on my Imac, also on my Asus e-book. I see that the external hard drive is partitioned into two. How or why I don't know. What I do know is that the first part is now full, and I cant see the second part when plugged into the USB on either computer. Could anyone help me by suggesting how I can access the second 500gig? Id appreciate answers in plain English, I really dont understand more than the basics, and the clearer ans simpler the answers the more I will learn, and thanks to all those about to read this !
 

A:Unable to access both partitions on external hard drive

Back-up all your data on the first partition.​
Right click on "My computer" and click "manage".This should take you to the computer management screen.​
Look at the left, you should see an option that says "Disk Management"; Click on it.​
You should be able to see all the disc partitions, find your External HDD partitions.​
Right-Click on the 2nd partition and delete it.​
After that right click on your first partition and select the option to "Extend Partition"​
​If you are confused, or need confirmation for anything please don't hesitate to ask.​
 

http://www.techspot.com/community/topics/unable-to-access-both-partitions-on-external-hard-drive.195074/
Relevancy 49.88%

Hey everyone..do y'all know good headsets for gaming? What do you think about Biostar headphones"iDEQN10"? I have heard its new but I dont know if it is good? Does anybody have some experience with it?

I need atleast your personal insights or experience about it though google could give info. but it is still different if its a word from someone whos familiar with it. this is really unknown for me..hope I can hear your knowledge with this, will be glad to know introductions from it.

currently im using Sennheiser PX 200
Thanks!
 

A:Headset for gaming? "iDEQN10?"

Lol, I see you've posted this on multiple forums..

Give me more info on it. All I can find is this, which doesn't tell me much. Open or closed back? Either way, Google has no results for reviews... so good luck.
 

http://www.techspot.com/community/topics/headset-for-gaming-ideqn10.194577/
Relevancy 24.51%

My son was using my computer temporarily for work. He was uninstalling Abobe Illustrator and needed to restart to complete the uninstall. When the computer restarted, the monitor ceased to get a signal from the computer. Have tried unplugging the monitor for a bit, tried restarting in safe mode - nothing has worked. Has the monitor somehow been fried from just a restart?
 

A:Monitor stopped working after uninstall

Really I don't think it fried from a restart. It just may have went bad. Have you tried another monitor to make sure. It could also be your on board Graphics or graphics card.
 

http://www.techspot.com/community/topics/monitor-stopped-working-after-uninstall.194220/
Relevancy 19.78%

Alright, so I've had this devilish little netbook for like two years, and so far the OS and the charging port have been shot. Replacing the OS is easy, it's just I cannot, for the life of me, open the casing up. I've tried for like 1 year, taking out every single screw I see that's in the frame, but nooooo it still doesn't want to come off. I've jammed screwdrivers inside and tryed prying open which was probably a bad idea but I know I didn't break anything from doing that, just scuff marks on the outside. Gateway calls this son of a b**** the LT2016u netbook. I've tried looking for a disassembly guide but gave up like 6 months ago. If you help me, I will love you forever.
 

A:How to open up my netbook

After reading the title I couldn't help but think of a smart_ss comment for a reply. I will spare you the pathetic attempt at humor. I know you wouldn't be amused. lol

This video should answer your question, allot easier than any words I could type.
How To Replace The Screen In A Netbook Laptop - Gateway LT2016U
 

http://www.techspot.com/community/topics/how-to-open-up-my-netbook.194098/
Relevancy 66.22%

Hi guys
I have a 500G WD usb3 hard drive, I unmount it without safely remove, when I mounted it again can't open it and windwos need to be format it for useable, but I do some fix on it & now windows can search in files & find all data, I can see drive properties used/free space, anti virus can scan it with all data too.... but I cant open or explore it & don't open file/folders when I use windows search!!
Error :
N:\ is not accessible​Access is denied​ ​what I must do!!!?​
 

A:"WD hard" can't be open and explore

Which OS are you on for Windows XP, 7, 8? Also make sure there isn't any USB connections other than the mouse and keyboard. Also you might want to look for a program called USBDVIEW run that as the admin. What that does is searches your PC for multi-USB connections that are dead (disconnected) Those disconnections need to be removed off your PC. So you would select the red X to fix your issue.

Another way is to go into the System Device Manager then under USB Controllers and remove all of them. DO NOT DELETE driver. Then reboot the system. Windows will re-build the Controllers drivers.

If the WD 500GB passport gives you errors or you hear a clunk noise, then you need to place that drive into a ziplock freezer bag and stick a folded paper towel inside there (for moisture) Zip it up and place the drive into the freezer for 8 to 10 hrs. Take it out let it thaw then try using it again. Only do this if you have issues with the unit.
 

http://www.techspot.com/community/topics/wd-hard-cant-be-open-and-explore.193162/
Relevancy 44.29%

I need to know if the HDMI motherboard in a 60" Samsung Plasma TV can be used in a Sony Bravia 52" TV. The motherboard in my Sony died and I have access to one in a Samsung Plasma that's screen cracked.
 

A:Is a 60" Samsung Plasma HDMI motherboard compatible with a 52" Sony Bravia HDMI motherboard.

No, it would not be, in the past I had to repair a tv for a friend that had his board shorted that was an LCD Sony Bravia 52 Inch and its board was very specific as with all Sony Products. The Boards on the TV's are the hearts and the companies that built them don't allow for parts to be interchanged easily. Your best bet is ebay and finding the part number to find a board, that's how I got the one I used to fix it.
 

http://www.techspot.com/community/topics/is-a-60-samsung-plasma-hdmi-motherboard-compatible-with-a-52-sony-bravia-hdmi-motherboard.193309/
Relevancy 51.17%

Hey everyone I have an old laptop with a battery that lasts about h in quot Power Saving quot mode I m going to be stuck next week for about hours at a location with few available public outlets and need to stretch my battery life as much as possible I ve already for battery to Looking life extend ways "techie" done the obvious generic tips of quot defragging the hard drive quot quot dimming the screen quot quot using few no external devices quot quot tweaking my power usage settings quot etc but it s not enough I m looking for some good quot techie quot solutions now like quot underclocking the CPU quot or quot removing the CD drive quot All suggestions are appreciated I d love to try to squeeze another hours out of this battery if possible no I don t have another battery and don t need to buy one just for this one event Thx PS Another idea Removing HDD and booting from USB Flash drive nbsp

A:Looking for "techie" ways to extend battery life

Removing the HDD and booting from a flash drive is probably the worst decision you can make. Flash drives have very slow speeds (even though they are flash memory, they arent fast) and very little capacity. Keep the HDD.

There are only a few more ways to improve battery life other than dimming your screen and adjusting the power usage settings. Under-clocking the CPU is really done by the "power saving" mode.

Try these suggestions:
1) Run this tool: http://support.microsoft.com/mats/windows_battery_power_settings
2) Turn of your network adapter. There is usually a switch on the side of the PC that toggles the network adapter on and off. That will save you a ton of power. Also make sure bluetooth is off. I dont think your older PC will have it, but just make sure.
3) Use this tool to remove any unnecessary processes from start up. This will speed up your computer while also reducing the amount of processes that run (thus reducing CPU and RAM usage).

I can suggest other options, I just need your OS. If it is Windows 7, it is easy too, if it is XP, I cant really help there since I forgot the OS.
 

http://www.techspot.com/community/topics/looking-for-techie-ways-to-extend-battery-life.192163/
Relevancy 50.74%

I have a WD External SATA 1TB Hard Drive that has ~700 GB of family memories/movies/documents/etc and it is now connected to Windows 8.

The original housing it came in was unsurprisingly cheap and the connection piece broke. I re soldered it on and the connection was made but the drive threw nothing but errors. I figured I messed it up so bought an external case and assembled it. Now however, the drive does not show up under my computer but does in Disk Management.

Disk Management claims that the HD has the full TB unallocated and not initialized. I don't want to initialize it because I don't want to lose the information I have on it. Any idea on how to get this working?

I have downloaded and used the Data Lifeguard available at WD and the External has passed the Quick Test so drivers are all there and working.

Thanks
 

A:WD External Drive "not initialized" but has data on it?

Umm, I would try first connecting it back to whatever PC version you were using before (Assuming Windows 7) and seeing whats up.

If that does not work, try messing with the connection that you re-soldered and making sure its all done fully correctly, something may have gotten crossed.
 

http://www.techspot.com/community/topics/wd-external-drive-not-initialized-but-has-data-on-it.193090/
Relevancy 51.6%

I m running the latest version of Firefox along Firefox The it Rolling Stones,"Paint Does Black"..Literally! with the extensions quot Video Download Helper quot amp quot NoScript quot This is on a G IGP Intel board w GBs of system RAM After perhaps tabs are open FF will black out when scrolling black out tabs or entire window sets and finally crash My other quot art collector machine quot P- GBs of DDR same browser but only quot NoScript quot Firefox Does The Rolling Stones,"Paint it Black"..Literally! will open literally hundreds without complaint Although at some point I suppose Firefox does simply get grossed out and exits Anyway the color value of pure black is So it seems to me that Firefox Does The Rolling Stones,"Paint it Black"..Literally! a some point the color management can no longer retain the color information necessary and the registers go to zero So my guess is it s acting like it s running out of Vram Yes there s a question in here somewhere Have any of you experienced this Or do any of you think a discreet graphics card might help Or perhaps more importantly do any of you agree or disagree with my diagnosis nbsp

http://www.techspot.com/community/topics/firefox-does-the-rolling-stones-paint-it-black-literally.192696/