Windows Support Forum

Event Viewer - Power Troubleshooter event question

Q: Event Viewer - Power Troubleshooter event question

I wanted to see who was viewing my computer and went to event viewer, under System > filter current log > power troubleshooter -- I found that the wake source for the system resuming from sleep was a device usb root hub, what does this mean?
Relevancy 100%
Preferred Solution: Event Viewer - Power Troubleshooter event question

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link (This link will automatically start a download of Reimage that you can save to your computer.)

Relevancy 20.21%

Power outage due to storm. Came back on without pictures and documents. It's an HP desktop. Would a file recovery program work? I've tried some of the instructions online, but they don't work.

A:Lost pictures on Windows 7 from power outage

Oh mary; I feel your pain. Were the pics within one folder and now they're ALL missing?
Relevancy 18.49%

I've done no overclocking, no advanced work whatsoever. Every time I try to google my issue, all of the solutions seem to be based around the person with the issue overclocking their system thus causing high tempuratures. This is not that issue.

On to the actual problem, my motherboard reports temperatures of 69c when running any program that takes any worthwhile amount of system resources (and some that don't), in particular, most games. CPU and GPU tempuratures seem far lower, around 30-40c. Assuming the sensor isn't to blame (and it isn't, if the feel of the case is any indication), are there any reliable ways to lower MB tempurature with simple BIOS and power settings?

Running an old F1a55-M (FM1) on Win 7 Home Premium, SP1.

EDIT: The motherboard idles at 47, which also seems high. I've changed locations for better airflow several times and wonder if I just flat-out need a larger case.

A:Question re: system temperatures

Fans running, dust?
Relevancy 20.21%


My laptop wont power on at all.
No charge light.
No light when power is pressed.

Was working fine yesterday.
Have tried battery and charger from identical working laptop to no avail.

Any ideas? I can usually fix laptops etc but if it wont power on at all I'm lost.

A:Dell Latitude E6520 won't power up (no lights at all)

Did you try removing the battery and AC adapter and holding down the power button for 30 seconds. Then re-installing the battery and try booting again?
Relevancy 18.49%

I recently decided I'm going to start using my old laptop again. I swapped the hard drive for an SSD and I'm quite pleased with the performance boost that got me. I am now looking for a ram upgrade from 2gb to 8gb.
I have a Dell inspiron n4010.
I went to crucial's website and did the system scan. The scan said that this would fit my needs.

Unfortunately, crucial doesn't ship to me. I'm forced to look elsewhere. I looked for something similar on another store's website. My question to all the experts out there is: will 2 of these work with my laptop and get me the 8gb of ram I need?
thanks for the help!

A:Quick ram upgrade question

Yes. The specs are exactly the same. Over the years I have used both Kingston and Crucial many times for memory upgrades and both are excellent.

You can also do a memory scan at Dell's own website. Just don't buy what they offer because they'll tell you to only buy genuine Dell memory blah, blah, blah. The Kingston will do you quite fine.
Relevancy 20.64%

Hello I am new to building the pcs so I am afraid I may have fried mine I really am pry I did not but this is what happened I finish tower Power will not work button My the pc and My tower Power button will not work when I turned on the power supply the power button on the motherboard glowed so then I pressed my tower button and nothing worked so then I re setup he F PANEL cords u know the pwr switch and all that jazz turns out it was set up wrong so I put them in right and tried to turn on the computer again the power button on the motherboard turns on but not my towers power button and so my pc will not officially turn on I am guessing and I am worried that I may have fryed my pc because when I took out the f panlle cords I realized my pc was still on and turned it off immanently and I am afraid that may have fryed the motherboard if anyone can help me it would be wonderful I am freaking out and have no Idea what the problem thank you for reading P S My tower button does not making a clicking sound when you push it I am not sure if that normal or it is broken or somthing it just doesnt make any click sounds nbsp

A:My tower Power button will not work

You could have a defective power switch on the PC case. Test this by using the reset switch as a temporary power switch. The power switch and the reset switch are the same for practical purposes except, of course, the size of the button (on most cases). If the reset switch works and is able to start the PC, then you know the power switch is defective.
Relevancy 20.64%

I have an older eMachines Desktop PC model EL1360G which has a 200 watt power supply.
I would like to upgrade it to at least a 400 watt power supply.
Does anyone have a suggestion as to where or what I should buy? I watched a few videos on youtube on how to do the replacement but how do I know all the plugs on the new unit are the same and will fit? Because if they don't, I'll be more confused than I already am.

A:Emachines power supply upgrade

Check and make sure all the connectors are the same as the ones you have

I'm not certain if the image above is what you have but I'm thinking it is.

Image above looks to have:

1x 20pin+4pin (ATX Power)

1x 4pin (P4)

2x SATA power
Does your power supply have these and only these?
Relevancy 18.49%

I am planning on building a small form factor PC but it will need RS232. I don't know for sure if there will be room for an add on card for the RS232. Is there a usb to RS232? If so, will it work as good as an add on card?

A:RS232 Question

Check out this link: TRENDnet USB to RS-232 . I do not personally own one, but I have used them at my job and they seem to work pretty well. You may have a driver issue, depending on the OS you will be using, but for the most part it works.
Relevancy 18.92%

As seen on this site, the previous USB 3.0 drivers were v3.0.4.65 for Intel 8/9 Series Chipset. On Gigabyte's website for the Z97 boards, they also list USB 3.0 v3.0.4.65 as the latest for their boards. Now my question is, why on Intel's Download Center, is USB 3.0 v3.0.4.65 listed as Intel NUC drivers? Intel forum staff claim that version is for Intel NUC only, but it doesn't seem that way.
Relevancy 20.64%

Hi guys, new here...I'm setting up a new pc, sooo a few questions here.
I'm planning on getting an Asus A88XM-plus motheboard, Amd X4 860K cpu and Sapphire R9 280 3GB video how much power supply would be enough...450-500W?..would 650 be an overkill? Is all of this fully compatible?
Do I need a sound card, modem or special cooling or something? ( I already have 2*8gb Ram sticks and HDD, don't really need DVD drive).
I'm also thinking in between Antec 902 V3 case and a lot cheaper LC Power Gaming 975b Air wing much quality difference is there in between these two?
Also, how much improvement is there in between this card and my current one, sapphire r7 265 2gb?
Are there anything that you would exchange for something else...I'm on a tight budget, but I don't mind spending a few extra bucks if it be worth in the long run.
Thanks in advance.
Relevancy 20.21%

Microsoft showed off a whole range of new PCs and devices running Windows 10 at Computex 2015, but one that really caught the eye is the Quanta Compute Plug, an entire PC integrated into a power plug the size of...

Read more

A:Microsoft shows off PC integrated into power plug

They may be handy to a lot and even have very reasonable prices but I can't imagine myself ever wanting any of these.
Relevancy 38.7%

Hi, Guys (And Gals) I'm attempting my 1st PC build and HAVE used the various online power supply calculators... however I'd like to hear some feedback from you all. No matter where I look online I always like to come here to be sure. My specs for the build are as follows:

Amd A6 5400K 3600Mhz Blk Edt 1mb 65w Socket FM2


HDD: Seagate 1TB Serial ATA HD 7200/64MB/SATA-6G

I would really like to use one of the 350W or 400W power supply I stripped from my previous PC's. I'm thinking of hooking it to an HDMI or VGA projector eventually though (Haven't bought it yet) Can I get away with one of these and play a game like World of Warcraft? or do I need to order something like the
SolidGear 650W PS2 ATX Power Supply on Tiger Direct?

Thanks in advance for any advice & thoughts

A:1st Build Power Supply Question

Over engineer the PS;

Calculate the actual needed power,

add a fudge factor and

multiply by 1.5.
Then round up to the next commonly available size
Relevancy 18.49%

Hey guys,

I have question about backbone networks. Need Help!

If an organisation has 3 departments.

Key servers are in different departments ? so a user from 1 department X reads and writes to file servers in another department Y. And both users access mail from a server in department Z.

The traffic and broadcast storms originating in one department is causing bandwidth saturation in other departments.

The core of the network is slow and is unable to meet the response time requirements of various critical business applications.

What is the solution based on core technology design, LAN technologies and design solutions to address inter-departmental traffic issues?

A:Question about backbone networks

The traffic and broadcast storms originating in one department is causing bandwidth saturation in other departments.Click to expand...

major faux paux. Broadcasts should not go beyond the current subnet.

I would guess

you're departments are co-located in the same building
and all are on one subnet
For large companies per the above, likely the 192.168.x.y is insufficient and your lan is using a subnet like 10.x.y.z for ease of network administration.

Broadcasts should be limited to resource online/offline and contained within the network segment where the device is attached. Users / systems in HQ do not need the status of a printer going offline the the shipping department.


segment the departments into unique subnets
then add static routes between them according to their need
eg: the company domain server would be needed by all (dept <-> srvr)
including the email and directory system.

FEW departments need access to the sales group or its data

You need to analyze the departmental workflow to begin this project, and implement one network change at a time.
Relevancy 20.64%

Here's the situation. I have this old mITX computer I built a few years ago that I'd like to hook up to Dad's big-screen TV so he can Skype from his living-room. Problem is, the computer is VGA only and his TV is HDMI only. The MoBo has just one PCI (not PCIe) slot with a maximum output of 75watts.

I tried a PCI video card with HDMI output, but the slot couldn't drive the card. Didn't even detect it.

I believe DVI uses less power (the cards are definitely cheaper), and I could just use a simple DVI-to-HDMI cable. A native HDMI port would be better. As long as it works, I don't care. But w/o an external power input, the card can't draw more than 75watts from the PCI slot.

Anyone know of a card that fits this very specific bill? Thx.

ADDENDUM: PC only has a tiny 300watt PSU.

A:I need a PCI (not PCIe) DVI card (either <75w or w/power input)

Check this one out: Zotac GeForce GT 610
It is a PCI Card (non express) that has DVI / VGA / HDMI. It is also a Low Profile and requires a 300w power supply or higher. It looks like it should work with your situation.
Relevancy 20.64%

I recently moved my computer from one side of my desk to the other and somehow it managed to make it so when I press the power button nothing happens. I've disassembled and reassembled the computer numerous times and tested the psu. The psu is working and it seems like the motherboard is the culprit. What is confusing me the most is that when I short the 24 pin connector to the motherboard then plug it in if I also press the power button I can turn on the computer. I dont see that as a permanent fix just in case it sleeps and I assume it is not good for the computer so I am looking for help on how to permanently fix my issue. Thanks in advance.
Relevancy 20.21%

Hello I need to connect power/reset buttons to dell optiplex 620, but I just can't connect them anywhere on motherboard.

I need help as fast as possible

Thank you
Relevancy 20.64%


I've got FSP Aurum Pro 1200W.
What UPS should I buy for that power supply if we assume that it has 100% workload?

A:UPS for 1200W power supply

See watts to KVA calc:

issue: what is the power factor?

hint: PF ~ 0.75
Relevancy 18.92%

Hey guys I was wondering if I bought one of these if it would work it s a dvi-d to vga adapter The site says quot the adapter only works if your computer AND your monitor both support digital and analog quot I bought a new GPU but now I can t connect my vga output VGA question to DVI-D from my DVI-D to VGA question tv to my videocard There is a vga port but it s already occupied for my old crt screen On my older GPU I had a DVI-I port so I used a DVI-I to VGA adapter to connect the tv But now I ve got VGA HMDI and DVI-D ports I don t use the hdmi on my tv because the input lag is terrible cheap tv So I want to buy this adapter to fix my problem but I ve read DVI-D is only digital I m kinda confused on this My GPU and tv both support digital and analog as the site requests so is this gonna work or is it just a scam This also made me wonder why the hell they don t just put DVI-I ports on all videocards it s supports both analog an digital Which is far more convenient than having only a digital signal or am I missing something here Thanks for reading nbsp

A:DVI-D to VGA question

I've also found this adapter/converter. It's more expensive but it looks more trustable than the 1st one I posted.
Relevancy 20.21%

HI, I was wondering if it is safe to use an atx psu on a motherboard with an eatx power connector. The motherboard has a 24-pin eatx and a 4-pin atx 12v connector. I bought the motherboard and started using an atx psu and everything seems to work ok then realized after it was an eatx power connector on the motherboard. Are there eatx psu's? Thanks

A:Safe to use ATX PSU on a motherboard with an EATX power connector?

EATX is a form factor (12"x13") not a power connector. I'm assuming you are talking about using a PSU with a 20 pin (old ATX) connector with a newer motherboard that has a 24 pin (current ATX) connector. If that is the case you will need to consult your motherboard's manual. Some 24 pin boards run fine with only 20 pins some don't. The issue is that each pin in only rated to carry a certain amount of current (Amps). If you overload one of these pins your risk burning or melting the ATX connector on either the PSU, Motherboard, or both.
Relevancy 20.64%

I want to learn how to manage ARM processor power management with LINUX (for example the Cortex-A53 MP Core).
Can someone recommend literature, a tutorial or web based information?
Thank you in advance
Relevancy 18.49%

I'm looking for an inexpensive router, any suggestion? The current router is downstairs, I plan plugging it in upstairs to boost the wifi. TIA

A:Router question

ASUS and TP-Link have some pretty good routers.. Do you plan to have Consoles (Xbox One, PS4, Wii U) using the network?? If so just ensure the router will properly support it as some older models may not work well with them.
Relevancy 20.64%

I was given a year old Corsair power supply XMPSU- TX-C I wanted to make sure it Questionable Power Corsair Supply s working right before plugging it to a motherboard So I did the paper clip power on trick and all the voltages were ok I proceeded to connect just one harddrive The harddrive spins up and then Corsair Power Supply Questionable makes a revving noise every second as if its powering down and back up repeatedly Also theres a green LED light on the harddrive that blinks normally its a solid on This doesn t happen every time I cycle the power supply however When the harddrive powers up properly the LED light is constantly on and rpm is constant I tried two other harddrive with the same outcome The problem is definitely intermittent I connected all three harddrives with the same results I tried the same setup with two other power supplies with no issues at all I am now sure the issue is specific with the Corsair power supply Is it because there s not enough load on all rails making the power supply unstable The AC current draw was only mA so it wasn t the overcurrent protection kicking in The V line was steady Corsair Power Supply Questionable but the V line fluctuated a few hundredths of a volt in unison Corsair Power Supply Questionable with the harddrive revving The V line was steady when the harddrive powers up normally I m hesitant to connect a full computer to this Anyone have an idea before I try to RMA the power supply Is this just a peculiarity of this model nbsp
Relevancy 50.74%

In a strange turn of events, Nvidia elected to use Epic Games' media event (instead of its own last night) at the Game Developers Conference to reveal its newest flagship graphics card, the Titan X.

Read more

A:Nvidia crashes Epic Games' media event, announces Titan X graphics card

Soo... What are the chances of a 6GB "980Ti" variant? A bit like the 780Ti was to the Titan Black?
Because it would be better for games and a hell of a lot cheaper

If the rumor mill is to be believed, the price is going to be $1,349, Most people who buy this for gaming will have no use of the double precision floating point prowess of the card, and the few that would probably should have spent a couple hundred extra bucks to get a proper Quadro!
Relevancy 20.64%

I am looking to get a new graphics card for my computer because atm it has integrated graphics, which as most of you know sucks. The power supply is 250W which I doubt would be enough to have a whole new graphics card implemented. The model is p6166f. The mother board has this for a graphics card slot PCI express 16x GPU. Please give me suggestions, I am looking to spend approximately 150 - 200 $ total.

A:Looking for new Graphics card and Power supply

We need to know who made your system. How old is your system?
Relevancy 18.49%

I am running Windows 7 Home Premium 64 bit SP1 AMD E 300 with Radeon HD 6310 Graphics.
I would like to be able to play a few of the newer PC games but when I try they seem to stutter and do not run smoothly.
Do I need to install a better graphics card? If so can someone recommend what kind I could buy and install without a high cost?
Thank you for any advice.

A:Upgrade question

The AMD E-300 (codename Zacate) is a dual core processor for small notebooks and netbooks. It offers a relatively powerful integrated graphics card and a single ...Click to expand...

It appears you have a portable device that likely doesn't have upgrade options. If your device maker doesn't list upgrade options on their website, you can likely scratch this idea.

Portables (Phones, Tablets, Netbooks, and Notebooks) are not designed with upgrading in mind. They are small and very limited with cooling capabilities. And most of the time everything is integrated in small form factors and can not be replaced.
Relevancy 20.64%

So I've been thinking about upgrading my GPU from a GTX 760 2gb to a GTX 980 but I'm not sure if I have to buy a new Power Supply aswell. I'm using a 650W power supply.
My specs are: MSI motherboard(forgot the name), 8GB ram DDR3, SSD 200GB, HDD 1TB, DVD-RW, 2 120mm fans + the CPU fan , a core i5 4670k (3.40 ghz) and the gtx 760 itself.


A:Should I upgrade my Power Supply?

Try this out;
Relevancy 21.07%

my laptop HP g61 does not power on either with battery or when connected to the mains supply(AC). whenever i press the power botton the battery lit in the front of the system will only blink for about 3 seconds without the system been power on(the fan,the keyboard light nor the power botton lit will not on) i try to remove the battery nd press the power button for 30 secs before putting it back,still their is no respond. but i discovered each time i remove the battery and plug it to the Mains,the indicator power light beside the plug of the system will lit for about 3 seconds before it went off again.i have checked it with another charging adapter all to no avail. pls ,help me out.

A:My laptop HP G61 does not power on

Perhaps you have one of those infernal HP laptop motherboard problems? How old is your HP g61, and have you kept the cooling channels free of lint and dust? How old is the hard drive?
Since it doesn't work from a battery or from wall power, you should have an experienced tech take a look.
First thing I would do is remove the hard drive, so you can rescue the data if need be.
Then I would remove the battery, and try again from the Mains. If nothing, then there is some real work ahead. Consider this a major failure in that case, and get expert help to take a look.
I doubt there is a quick fix.
Please keep us informed as to what you learn and what helped get your HP G61 back up and running.
Relevancy 18.49%

Ok first I know this is the hardware section but because of the nature of my question this is the best place I feel it should go I am upgrading my motherboard Upgrading cpu question mobo and and CPU from Asus M A TD-V EVO USB Xtreme Design ATX AMD Mobo and an Amd Athlon II x Ghz to ASRock Z Extreme LGA Intel Z HDMI SATA Gb s USB ATX Intel Motherboard and a Intel Core i - K Sandy Bridge Quad-Core GHz GHz Turbo Boost LGA Upgrading cpu and mobo question W Desktop Processor Intel HD Graphics Now all hardware does work but my issue seems to be a software issue more likely than Win bit which I need to get a hold of the disc my brother has was a family pack thing Anyway my question is pretty simple I Upgrading cpu and mobo question hope Without doing a fresh install of Win bit is it possible in any form to get the new mobo and cpu working like maybe using the repair method or installing over the current installed win Os so I do not have to back-up a ton of data and re-install lots of programs Also is there Upgrading cpu and mobo question any other work-around that might help I do have a Tb external Hdd I plan to backup my C drive with either way but it would be great if I did not have to do a fresh install Again sorry if this is in the part of the forums nbsp

A:Upgrading cpu and mobo question

Just back it up, bite the bullet, and reinstall Windows to get things right. An intel mb is not going to work right with the AMD drivers installed.
Relevancy 18.49%

Hello, I was recently given a Dell Dimension 2400 from a friend. It had absolutely no upgrades, however I had old parts sitting around and I gave it a bit of an upgrade. I put in 4gb of ram (however found out it had only supported up to 2gb, so I had to remove a card) and added a Visiontek Radeon 9200 graphics card in. Now, I have two processors here that look like the might fit, but I wasn't sure. So, I was hoping to get a second opinion from someone who has a bit more experience with this than I do. I have two spare processors

one of them is a Pentium 4 3.00Ghz (

the other is a Pentium 4 1.6Ghz (

Would either of them work? Also, would upgrading to windows 7/vista increase the support for ram? Thank you.

A:CPU upgrade question

Socket details:

Pentium 4 3.00Ghz is LGA775
Pentium 4 1.6Ghz is PPGA478
That is two different architectures.

Specs for Dell Dimension 2400

Intel Pentium 4 that runs at 2.2 or 2.4 GHz
internally and 400 MHz externally, or 2.266, 2.4,
2.53, 2.66, 2.8, or 3.06 GHz internally and 533 MHz

Intel Celeron that runs at 2.0, 2.2, 2.3, 2.4, 2.5,
2.6, or 2.7 GHz internally and 400 MHz externally.Click to expand...

Please note this would be PPGA478 architecture not LGA775.

What CPU is currently in the computer?

Relevancy 18.49%

Greetings. I have an Asrok Z77 Extreme 6 Motherboard.

I currently have an I5 3570K in there. I believe my Mobo is LGA 1155.

Can I pull out the 3570L and drop in a I7 4790K? I 'think' they are the same socket.

Not sure if I will see any real increase in performance. I over clock the I5 to 4.2.

Any advice is welcome.

A:Question about my motherboard

Larsenex said:

Can I pull out the 3570L and drop in a I7 4790K? I 'think' they are the same socket.Click to expand...

Sorry, no. While your motherboard does have socket 1155, the processor i7 4790K is socket 1150. You'll need a new motherboard.
Relevancy 18.06%

This ink cartridge[1]

Is labelled as "T048120-S" on some online stores... others it's labeled just as "T048120"

What does the "-S" mean? single cartidge?

A:Question about Epson printer ink model #

Probably means standard capacity.
Relevancy 20.64%

I know we had a thread on this in April of last year but what I really want is a poll so I can quickly see the numbers. What I'm trying to see is how many people are running 3 core machines and how many people have 6 core procs. Keep in mind I want to know actually cores, not the number of simultaneous threads you can run. Also, if you're using a multiprocessor machine please add up your cores. Also, if you have a triple core machine but it's not your primary I would appreciate it if you would post so in the thread.

A:How many cores power your primary machine?

Work related question or just curiosity?

I run 2 cores now in almost everything I physically use. I have a single core system that runs and does stuff for me nearly 24/7, but I almost never sit in front of it.
Relevancy 18.49%

Hi all. So I was wondering if you guys had any opinions on gaming headsets for pc. My headphone jack for my computer isn't working so I don't think I can use any wired headsets (if I'm wrong on this please let me know). So I was looking into wireless ones, preferably $100 and under. The three I narrowed it down to were the corsair 2100, turtle beach px4 or 5 (from amazon or ebay) and the PDP afterglow kral. Anybody have any opinions on any of these ones or any other ones you would recommend? Thanks for any help on this!
Relevancy 21.07%

I m a tech with years of IT experience PSU. power bad Still or motherboard a won't up Not and I ve built my fair share of computers over the years I have a puzzling one I cannot get to Not a bad motherboard or PSU. Still won't power up the bottom of I m afraid I cannot for the life of me Not a bad motherboard or PSU. Still won't power up get this computer to power on Here is a list of things I ve tried and or eliminated The first thing to happen was quite strange The computer would start when I first got it it was a used system but only after a few presses of the power button I don t ever remember it powering up on the first press of the power button It s an Intel DX BT Extreme Series motherboard with a bit Intel CPU in it GB of RAM FYI the motherboard has a aux power on off switch ON the motherboard itself used for testing at the labs - the manual recommends using the front panel switch however obviously Current state the computer will not turn on at all There are two LED s by the CPU that are for indicating a voltage regulator overheating and the CPU overheating When I hit the power switch the VR Regulator LED blinks quickly once and that is all Ok here goes - Tested PSU came back fine Decided to use that PSU in another system to double check would not boot up in the nd system I replaced the PSU with a good one I know that works of even higher wattage Still doesn t boot up - Tried using onboard power switch same result Tried using the reset switch as a power switch same result so the switches are likely OK I even removed all front panel switch connectors and tried to jumper the two power pins using a flathead screwdriver Still doesn t boot up no power only a solid green light on the mobo when power is plugged in - Reseated all RAM sticks although a system should still POST if a stick is bad as well as CPU same result - Replaced RAM with RAM I know works Same clock speed compatible with this motherboard Again if it s RAM it shouldn t prevent the fans from spinning - Replaced CPU with a good one same socket factor Still no powering up - Removed all other hardware USB cables video card speaker connector drives etc same result - Also replaced the fan with a non-OEM intel fan that has a higher RPM and draws more air - Tried replacing thermal paste on the premise that since the VR reg is showing it s overheating hopefully this would do something - Replaced CMOS battery Same result After testing just about everything I came to the conclusion that it must be a bad motherboard What Yeah a faulty Intel motherboard I ve never heard of such a thing So I RMA ed the board and got the new on in the mail How puzzled was I when the same exact thing happened Words can t describe Solid green light when power cord is plugged in VR light flashes BTW the green light is a V Standby Power Indicator Now in the manaul it states that these lights CPU amp VR LED s will flash when they re indicating a fault not blink once So I tried all the steps again nothing I have replaced every piece of hardware I can think of with good hardware and am still getting the same result - a flashing VR regulator LED Intel has no support for this and the people I ve spoken with at tech support at Intel are stumped My only thought left is a grounding issue which would seem strange to me since the problem gradually got worse that is taking more presses of the power button to power on then eventually no response I am going to switch cases and see if that s the problem If that fails I am out of troubleshooting steps - I ve literally replaced EVERYTHING inside and outside the computer Again to reiterate these are the things that have remained constant in both motherboards original and RMA ed Solid green V Standby Power Indicator Flash of the VR LED when applying power I have replaced every component with the exception of the case and the standouts which I believe have grounding rings on the threads Any ideas nbsp

A:Not a bad motherboard or PSU. Still won't power up

Speaking of shorts, try pulling the motherboard out of the case. Place it on a non-static, non-conducting surface and leaving in the CPU, heatsink/fan, only hook up the PSU, RAM and graphics card, see if will post.
Relevancy 29.67%

Hello everyone - I have just assembled a new build It will not power up I need a suggestion to figure out if the problem is the case or the motherboard This is a mini-itx build power-up: power New or Build MB? no supply case's The case is New Build no power-up: case's power supply or MB? Linkworld LC - B This case comes with a volt watt external laptop-style power supply that plugs into the rear of the case just like New Build no power-up: case's power supply or MB? a laptop power supply plugs into a laptop - a barrel connector Inside this power connection connects to a power supply component that is not like a regular ATX power supply but is on a printed-circuit board New Build no power-up: case's power supply or MB? mounted on the case This has several capacitors and other stuff From that comes the -pin and -pin power supply lines for the motherboard I assume the -volt power supply for this external power supply unit is right since it came with the case It was watt The processor is an IBM t with TDP of watts Lower-powered CPUs can be put in a small so I assumed the power supply might be under-powered I ordered a -watt volt power supply with the right size barrel - and same polarity pos inside The MB is an ASRock H MV-ITX It is mini-itx form factor Still same problem Everything is connected correctly When I press the power-on button an external CD drive I have plugged-in spins up for a while But no power light comes on in the front of the case there are no POST beeps the fan for the CPU does not spin up No other signs of life So power is getting into the MB - the external CD drive is plugged into a USB socket in the rear panel of the MB After trying a watt and watt power supply I believe the problem cannot be the power supply cord Can it be that I have too little load I don t think so I plugged in another mm fan and an ol-fashion floppy drive just the power connection to add more load - same thing no power-up no POST nothing but the CD drive will spin up when I open-then-close it yet again So here is the help I need what else can I try -assuming the MB and case are fine is it more likely the case power supply is bad or the MB --Thanks nbsp

A:New Build no power-up: case's power supply or MB?

Well, I figured out the problem.
I am planning to re-do the older mini-itx system I have; it has gotten riddled with Trojan software for kids downloading games; it basically has been de-commissioned already.

So, I took the pico-psu power supply from that older computer, and hooked it up to the one I am making. Everything went perfectly.

So, I un-did that, removed the MB from case, disconnected the barrel-power connection from the case, unscrewed and removed the power supply that had been mounted in the case, put the pico-psu power supply back in place (I had to drill the hole for the barrel-connection out to be a little bigger since the pico-psu internal/external connection is threaded and held in place by nut with lock washer), and routed wires to be clear of cpu fan, screwed MB to stand-offs, and closed it all up.

now, everything is great. I like this linkworld case, but the power supply is worthless. I may try to get a few dollars back from the ebay vendor, to make me happy with a case that is less than what I should have gotten, but is working for me; I don't want to wait on returns, etc.
Relevancy 18.49%

Hey, I wanted to update my cpu stock heatsink to something new sense this one sucks and I was gonna get
for my cpu
but I wasn't sure if that huge cpu heatsink would fit in my case, could anyone give me advice whether it will or not I am still new to building, Thanks!
This is my case -

A:Cpu heatsink question

You can try to use partpicker (needs a valid email to save parts list) to test your builds. a warning will show for any possible incompatibility. to expand...

based on newegg product, it seems able to handle 'full sized cpu coolers'

Rosewill Line-M
This review is from: Rosewill LINE-M Micro-ATX Mini Tower Computer Case, Dual USB 3.0, come with Dual Fans, Support up to 4 Fans, 12.5" card-Retail

Pros: Size, Appearance, USB 3.0 Front Panel. I own two of these one with fx8350 and one intel 4770 both with r9 280x gfx cards. Cable managment is tough but I expected that with the amount I packed into this form factor. Keeps my gfx cards around 70 degrees on stock settings. Fits full size CPU coolers. This is just about the perfect size for a computer case in my opinion.
Cons: bent the back panel slightly removing cut outs for PCI and PCIe mounts other than that no complaints really.
Other Thoughts: Get a modular PSU for this case.Click to expand...

based on partpicker: to expand...

Compatibility Notes
Unable to verify the Rosewill Line-M MicroATX Mini Tower Case and the Cooler Master Hyper 212 EVO 82.9 CFM Sleeve Bearing CPU Cooler are compatible.Click to expand...
Relevancy 20.64%

My new build wont power on all I hear is a few high pitch sounds coming from what I think is the psu.
My specs:

1TB HDD (from previous build it was working fine 2 days ago)

2TB HDD(from previous build it was working fine 2 days ago)

GPU = GTX 680 2GB (from previous build it was working fine 2 days ago) MSI GTX 970 GAMING 4G GeForce GTX 970 4GB 256-Bit on it's way in the mail.

Case is pretty old and doesnt have a lid but it was working fine with my pervious buid)

PSU = CORSAIR Enthusiast Series TX750 V2 750W ATX12V v2.31/ EPS12V v2.92 80 PLUS BRONZE Certified Active PFC High Performance Power Supply (from previous build it was working fine 2 days ago)

Heatsink = Scythe Ashura Universal Processor Cooler

CPU = Intel Core i7-4790K Haswell Refresh Quad-Core 4.0GHz

Motherboard = MSI Z97-Gaming 7 Intel Z97 Motherboard

Memory = CORSAIR Vengeance 16GB (2 x 8GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory

Please help me

A:New build wont power on

Disconnect everything except the monitor, cpu, ram. In fact, go down to 1 stick of ram. Will it POST now?
Relevancy 18.49%

My gaming computer turned in February and now that it s no longer under warranty things are going wrong This week in the middle of a project the machine rebooted on its own It restarted but shortly after did replacement PSU question it again and again I still have free tech support and two tech s offered help on what could be causing it First I replaced the cooling system thinking the PSU replacement question one installed failed and the cpu was overheating doing it It still rebooted I purchased software called Hardware Monitor to see if the power supply voltage was bad but it seemed ok then I swapped out the memory in case there was a bad stick It still rebooted My support tech feels it still could be the power supply and suggested I replace it I was told that I would need to buy the exact model and that buying any other would require a complete rebuild of my PC Since the computer is years old the power supply isn t sold anymore I was wondering if it s true that my computer would need to be completely rebuilt if I bought a PSU that wasn t the same The power supply is a Enermax Galaxy EVO w model egx ewt My computer was made by Digital Storm More system details available if needed nbsp

A:PSU replacement question

1. What hardware do you have in your system that needs such power? We need your hardware specs: CPU, GPU, amount of RAM, drives, etc.
2. Why does he believe a complete rebuild is necessary because that particular psu isn't made anymore? Is it a special size? If your case is to standard specs then see point #3.
3. Who is this support tech? Does he work for Digital Storm by chance? Check these psu's that will more than meet your power needs: 600479299&IsNodeId=1&name=1200W - 1499W
4. Before you spend any $ find someone who has a digital volttage meter and test your psu to see if that is really the cause.
Relevancy 19.78%

24x7 - Low Power Consumption ? Internet Download Machine

I want to build a System that has LOW POWER Consumption.


Mostly Downloading Stuffs , Might Host Own Cloud too , Email Clients , IRC Clients , Other Internet Connected Apps

I was thinking of a Kabini System

Athlon 5350 (25 W TDP) & Some AM1 Mother Board

Again I was thinking about the Intel G3258 Anniversary edition processor (But it has Much Larger TDP)

It should be A Windows 7 Machine . Not Linux or other what nots !

But I am Here for some Advice. I already told you my requirements.

Advise me - What should I do ?
I only want to buy

Processor + Motherboard + RAM



I have the rest

A:Hardware Suggestions - 24x7 - Low Power Consumption Internet Connected PC

Hmm; Why is power consumption a hi priority issue - - are you running off a solar powered system or portable generator?
Relevancy 20.64%

A good example of why not to buy cheap power supplies.

This power supply was about 6 months old, Used for 2 or 3 days per week, And drew around 450 watts under full load.

Thankfully the rest of my pc components were spared. It was used in my second older pc, I use a corsair TX850 v2 in my main machine.
Relevancy 20.64%

Sorry I must not have sent the last post correctly I am new to this site So I will try again I was getting ready to upgrade to bigger hard drive or drives Before doing that I needed to take the old hard drives out to obtain some information off the labels I did so and while they where out I cleaned the Mounting slots a little better than using just No drives to SATA Power hard air Having done that I re-installed them both When I turned on the power button the button lit up and the fans were running But No Power to SATA hard drives it No Power to SATA hard drives does not seem that the hard drives are getting any power as I can t hear or feel any thing Plus the computer is not booting No Power to SATA hard drives I don t recall unplugging anything other than the two hard drives But I also notice that I have a short cable bundle with two white plugs with three pins and one empty pin hole on the other end a black connection with with five connector slots with one middle on blank That makes me think that I unplugged the power to the hard drive someplace along the ling As I have a wire bundle that has two SATA power connectors that are plugged in But their are three white female plugs marked P P and P which are not connected to anything in that wire bundle I don t know at this point if the power comes through that bundle from the power source Of if I do not have the power plugged into the lope I hope that somebody can help me figure this out and let me know if I burnt out the hard drives and have to start over with my recover disk reloading windows and going from there nbsp

A:No Power to SATA hard drives

How would I close this post out. Dumb me had the monitor plugged into an unused VGA port. It only took me two and a half days to figure that out. I wanted to let others know to check and see if they have everything plugged in where it should be. Including the VGA or other monitor cables.
Relevancy 18.49%

Hi guys,
My wife's Galaxy was hacked and sent emails out to her entire contact list.
The message contains a link that may provide a clue to who did it.
Is there a way to possibly isolate and open the link to view it without letting whatever it is destroy/spread/etc?
Relevancy 18.06%

Hey guys just another quick question about my motherboarding and CPU. Currently I am not satisfied with my CPU at all and I'm thinking of upgrading to this
and my current motherboard is this
on that ^ website it says that my current motherboard supports the CPU that I linked, however my PC technician says that I also have to upgrade to a newer motherboard that can support that CPU that I want. My question is is that really the case? Can my motherboard run that CPU or is it really too old?
Again thanks for reading/helping

A:Upgrading CPU, question about motherboard compatability

Vidosoli said:

Hey guys just another quick question about my motherboarding and CPU. Currently I am not satisfied with my CPU at all and I'm thinking of upgrading to this
and my current motherboard is this
on that ^ website it says that my current motherboard supports the CPU that I linked, however my PC technician says that I also have to upgrade to a newer motherboard that can support that CPU that I want. My question is is that really the case? Can my motherboard run that CPU or is it really too old?
Again thanks for reading/helping Click to expand...

No, that motherboard is LGA 1156 while the i5 4670 is LGA 1150. You would need a new motherboard to go with that CPU>
Relevancy 18.49%

I am using a corsair H60 liquid cooler. Am I going to get better cooling results by putting the radiator on the top of the case and sucking room temp air in through the radiator and then pushing it out back with another fan(plus a front fan intake also). Or am I not going to notice anything by just having my front intake fan and push the air out through the radiator with a fan? Thanks.

A:Cooling question

It is probably best to push air out of the case with the radiator since that will probably lessen the amount of dust that comes into the radiator. That is my opinion though. Maybe someone else thinks otherwise.
Relevancy 20.64%

I wanted to reset my admin password on my asus ultrabook,
so I took advice from some wanker who told me to remove round battery for 5 min, unplug it from motherboard, plug ac power in without replacing battery yet....... So... THIS WANKER DID!...
Now turning my computer on ive got nothing .... Except a 'battery charging flicker', when releasing power button after holding it a long,long time!!!!! PLEASE HELP ME IM STUMPED, OR SIMPLY THE OWNER OF A PAPER WEIGHT? .... ( I did see a green light briefly when I plugged it in, without the round battery. )

A:My Asus Ultrabook won't power up

Sounds like this procedure corrupted the motherboards bios, and you may have a "paperweight" now for good. Did you re-install the "round" Bios button battery?
Relevancy 20.64%

I have a 9 yr old Desktop PC and my power supply is going out. The one I have is a modular style power supply. Is it required that I replace it with another modular power supply or does it matter?

A:Buying new Power Supply

No, it doesn't matter which one you use. Use whatever type you wish.
Relevancy 21.07%

I had a completely new experience.

I installed a new R9 280 today.
I have a CORSAIR HX Series HX750 750W 80 PLUS GOLD PSU. ([email protected])
I was running an ATI 6870.

Previously I never heard the PSU. While checking out a game a fan ramped up and I thought it the
R9 280. I thought man that's loud. Through some experimentation I found the R9 280 fan noise was not the problem but the HX 750. I cannot tolerate too much noise from my computer so this PSU has to go.

I know the R9 280 draws more power then the 6870 so the PSU is doing it's job.

My question is: How many watt PSU would I need so it won't ramp up....or are there other considerations I need to focus on as well...besides the +12 rating and wattage.

Thanks for any help

A:Power supply has to go. No, I am not asking which one to buy.

Just get the Rosewill Gold 450w, I think it's on sale.
You won't really find any good passive power supplies.
Relevancy 20.64%

I bought a gaming PC, and I am wondering if my graphics cards and the computer itself are pulling to many watts, Will the lighting inside the box put a demand on the power supply??? I am debating about taking them out, I don't even have the lights on anyways I find them a waste they came with the computer I bought

A:Will lights draw too much power?

Josh86 said:

I bought a gaming PC, and I am wondering if my graphics cards and the computer itself are pulling to many watts, Will the lighting inside the box put a demand on the power supply??? I am debating about taking them out, I don't even have the lights on anyways I find them a waste they came with the computer I boughtClick to expand...

Josh*^ - the lights could not possibly be pulling more that 10 watts, at an extreme. Probably they are actually pulling a level that you could not notice before-and-after if you used an actual measurement, such as with the Kill-A-Watt.

Same for fans, and most anything else you plug in or on except video cards.

Everyone: you will spend all kinds of money to have powerful components, and a suitable power supply - so go ahead and get an ACTUAL power draw measurement -

The kill-a-watt is simple to use and read, very simple. it costs $20 or $25.

You can use it on anything you plug into a 120 volt outlet. Vacuum cleaner, hair curler, radio, anything. It tells you exactly how much power is being used. Exactly.

For over a decade, these power calculators have been estimating power needs, and they have been over-estimating by 100% the entire time.
Relevancy 20.64%

Greetings I ve moved to another country where electricity is not stable and goes high low or even disconnect power failure many times a day So i brought an old UPS i have discovery and connected it to the outlet and connected the PC and the LCD screen to it Sometimes when the electricity goes high down the UPS seems can t regulate fast enough or when the electricity disconnect the UPS can t change to battery mode fast enough so the PC restarts I though the problem is from the UPS so i bought failure during My despite restarts UPS PC power a new one iXA PRO which also has a built in AVR with wide input range of - Vac wide range of input frequency output short circuit protection overload protection and the transfer time My PC restarts during power failure despite UPS is ms I connected the PC and the LCD screen My PC restarts during power failure despite UPS to the new UPS and connected my modem and an external hard to the old one Surprisingly when the electricity went high low or when it disconnected the modem did not reset but my PC restarted which means that the old UPS is still working and the problem is from the PC itself I use My PC restarts during power failure despite UPS a very god power supply Blue Storm - wat so any idea what the problem could be Note When the electricity goes high low or disconnect the PC doesn t actually restart it just half turned off i mean i can still hear the fans rolling but there is nothing on the screen and i have to turn it off then on Note Sometimes when electricity goes high low or disconnect the PC keeps working normally Thanx in advance nbsp

A:My PC restarts during power failure despite UPS

My guess is your power supply in your PC uses active PFC (Power Factor Control) while your uninterruptible power supply is likely rated for a passive PFC.
Relevancy 20.64%

My sister's 13" MBP (2011) died a few hours ago. According to what she told me, she was using it, and then, poof, black screen and no power. She doesn't have the cash at the moment to have it properly checked by a tech, so I did a basic troubleshoot in an attempt to narrow things down.

While the internals are a bit dirty, I didn't see any obvious signs of physical damage (it was relevant to check for this). Furthermore, the machine doesn't seem to respond to any power sources. I tried a couple different power cables and, while the little amber light on the magsafe (sp?) tab will come on briefly, the computer with neither power on nor display a charge on the built-in charge indicator. I will also note that the machine failed while disconnected from an outlet source with a full battery indicated.

My initial conclusions are a) the computer fried itself or b) the battery is toast. Any suggestions?

A:2011 MBP 13" Won't Power Up

If no one here can offer any insight, I would post this to the Apple discussion forum. There are usually people there that can diagnose this from just a description so that is your best bet.
Relevancy 18.49%

Hello I am looking to upgrade my current pc will post specs below and am wondering what will give me the most bang for my buck as my budget is limited a $600 with budget only Upgrade question and I may not have the funds to upgrade again for a while Current PC specs Intel Core i LYNNFIELD GHz GB ram and a Geforce EVGA GTX ti GB I was set to order a new MB ram cpu and another GTX ti to run sli My new pc would have been this was all within my budget Intel Core i - K Processor GHz GB ram ASUS Z PRO LGA Motherboard Geforce GTX ti GB x Ive had some people recently tell me the most bang for the buck would be just spending almost all of it on a video card as thats where the bottleneck for most games is I can see that being true but my cpu ram and mb are about years old I still think Upgrade question with only a $600 budget id get more performance for the overall package but im far from an expert and could use any advice and or suggestions Also im a but Upgrade question with only a $600 budget hung up on going from a I to a I but the newer cores have to make up for whatever difference there may be right Thanks and sorry if I put this in the wrong spot nbsp

A:Upgrade question with only a $600 budget

Does your current system not support SLI?

And does you PSU provide enough power for the two 660Ti?
Relevancy 18.49%

Hi Everyone,
I'm new here so I'm not very aware of the things going on. But I'm desperately posting this because I want some good answers and advice regarding my PC. And I'll appreciate any response.

Now here's my question. I recently bought a PC but not the kind you'd want as a gamer. I want to know if it's possible for me to replace its current Video card to Higher one, I mean a Graphic card capable for gaming and compatible for my system. Also about the RAM, I want to know if it's OK for me to change it to like 16g? My current Video card is NVDIA GeForce GT 620 1g. -


A:Just a Simple Question :)

It mainly depends on your power supply, motherboard, and your computer's case on whether you can upgrade your video card. Chances are your power supply will be the most limiting factor on your machine. You could bump up to something like a 750 Ti without much concern about the PSU but anything higher and you'll likely need to change that part out also.

As far as the RAM goes it's all motherboard and what you've already got installed. You might end up having to remove some of your memory modules in order to put higher capacity ones in. That shouldn't be an issue with the Core i3 though - 16GB should be easily attainable.
Relevancy 18.06%

So I built my system using this SSD caching It works really well My hard drive is terrabyte and my Cache drive is a gig ssd Lately while a Intel Storage Rapid Technology question.. playing Star Wars the Old repubic I have been freezing Intel Rapid Storage Technology a question.. in game This freezing completely locks the computer I run Teamspeak and I can still push to talk and my friends can still talk and I can talk to them via this during the freeze What is odd is Cnt alt delete will not bring up the control panel to allow me to kill the game I am just stuck Normally I would say this is a Video driver issue I did cleanly reinstall the latest Nvidia driver and this will still occur sometimes Now when I disable RST I never get the problem I can play and play and play When I reactivate RST to maximized I can still play but its like a timer After about or days the Freeze will happen So my RST question is has the driver been updated since when I built my computer and is it possible to update this driver now without having to re-install Windows and all my programs If I am left with having to re-install I am likely to just fork over the money and just buy a gig SSD and keep Windows and or of my favorite games on it and use the Terrabyte drive for Music videos and storage nbsp

A:Intel Rapid Storage Technology a question..

Yep, there's 2013 versions for Win7.®+Rapid+Storage+Technology+(Intel®+RST)
Relevancy 20.21%

I turn-on the power on my laptop and all I see is a cycle of Red, Green, Blue, White, & Black of color on my screen. Computer was working the night before. I do not know much about troubleshooting a computer. Can anyone please give me an advice or guide if this is something I would be able to tinker to work or bring the laptop over for service.
I have a Dell XPS1730 (5 years old) with Nvidia IUPGA5D G84. Recently, upgraded to Windows 7
I appreciate your assistance.


A:Laptop screen flashes RGBWB color upon power-up

The internal video has died. To verify this you can attach an external monitor and see if the display is normal
Relevancy 20.64%

So I've got a mostly custom built pc, its motherboard has everything built in(Graphics.etc) but im looking to upgrade to this for graphics:
I have two questions:
1. I have a 500w psu currently, will I have to upgrade, and by how much. will I take of the built in graphics on the motherboard.

And also, are there any reccomendations for a better psu

A:Power Supply Vs Graphics Card

Product Description
Technology:GDDR5 SDRAM, Size:3 GB, Bus Width:384-bit, Effective Clock Speed:6.4 GHz, Width:4.2 cm, Depth:31.1 cm, Package Type:Retail, Height:15 cm, Cables Included:1 x DVI-VGA adapter, Peripheral / Interface Devices:Two 8-pin power connectors, Required Power Supply:750 WClick to expand...

your link clearly states that a 750w PSU is required.

you can use any of these online power supply calculators:
newegg(store) calculator(power supply requirement)
outervision calculator
Relevancy 20.64%

When I power on my Toshiba equium a200-151, the screen lights up but no display at all - even though there is loading activity. I rigged up to my PC monitor and everything is fine - see bios and windows loading etc. Borrowed a spare compatible working screen but same problem. I'm not 100% sure if its the inverter or the ribbon connector - any ideas before I buy a new inverter? Thanks for looking.

A:Lcd lights at power on but no display

I would say that the video cable (ribbon cable) is bad based on what you have tried so far. This cable goes from the motherboard to the LCD display. Did you use the old inverter off the suspect Toshiba when you tried the compatible spare LCD panel?
Relevancy 20.64%

Hi all. I just bought a graphics card that needs 350 watts and +12v with 20 amps to run. My power supply has to following output:

+5V 22A MAx -12V 1A max
+5V (FP) 2A Max +3.3V 17A max
+12VA 18A max +12VB 18A max

combined power on +12VA and +12VB rails must not exceed 360 watts

Total combined power must not exceed 375 watts

Can it run the card?
Thanks all.

A:Can my power supply run my new video card?

Hi, could you please post a little more detail.
Instead of saying graphics card, it would help if you said the actual graphics card.
Instead of power supply, you could say what power supply you have.
Relevancy 20.64%

Hi there. Since I bought my new mouse and illuminated keyboard, when I use the PC a lot, they have spontaneously been stoping for a period of time and then they work fine. I didn't have this problem before because I had a ps2 keyboard. Now I have USB mouse and keyboard and this happens. I do believe there is a problem with the power management. A friend of mine has the same motherboard and he incurs the same problem. I have a Gigabyte GA-B75M-D3V and here is a printscreen of my bios with the power management tab.
What settings should I change?

A:Bios power management


I think you'd be able to adjust that power management settings in Windows under

Control Panel>Power Options>Edit Plan Settings>Change Advanced Power Settings>USB Settings
Or in Device Manager>USB Root Hub Properties>Power Management Tab
Relevancy 20.64%

Is my motherboard compatible with and does it have enough power watts it compatible my Card have power new to & enough with run Is mob Video to run new video card My specs More details about my computer Component Details Processor Intel R Core TM i CPU GHz Memory RAM GB Graphics Intel R HD Graphics Gaming graphics MB Total available graphics memory Primary hard disk GB Free GB Total Windows Home Premium System Manufacturer Gigabyte Technology Co Ltd Model H M-UD H Total amount of system memory GB RAM System type -bit operating system Number Is my mob compatible with new Video Card & have enough power to run it of processor cores Storage Total size of hard disk s GB Disk partition C GB Free GB Total Media drive D CD DVD Graphics Display adapter type NVIDIA GeForce LE Total available graphics memory MB Dedicated graphics memory MB Dedicated system memory MB Shared system memory MB Display adapter driver version Secondary monitor resolution x Primary monitor resolution x DirectX version DirectX Video Card Information Network Realtek RTL D D Family PCI-E Gigabit Ethernet NIC NDIS New Video card info Nvidia G-Force Video Px Video card UPC- Mb PCIExpress X Dual Monitor Support My power supply is watts and on my motherboard now there is only sticks of GB ram Patriot Viper Extreme and nothing else in any of the expansion slots I looked online but cannot get a straight answer Can my motherboard run this card with no issues Thanks I am shine nbsp

A:Is my mob compatible with new Video Card & have enough power to run it

No one can say if it will run with no issues, just because there could be any number of complications that could pop up. If you asking will it work with your current system, then yes it will run on your current system with the PSU. I would advise that you uninstall the video drivers (and software) for the current card, changing out to the new card. This will create less of a head ache for you in the end.
I would also suggest trying to find another 2GB ram stick because your motherboard is a Dual Channel motherboard and the computer will run better if you have 4 sticks of ram instead of 3. Its not going to hurt your computer by having 3 sticks of ram versus 4, but you will get better overall performance.
Relevancy 18.49%

I have a Lenovo Thinkpad T430 that I configured with 4 gigs of RAM (budget constraints at the time). It is in single channel (Lenovo never mentioned this tidbit of info; the sad part is both my wife's and daughter's 1st Generation Thinkpad Edge came with 4 gigs of dual channel at 7 timings). My CAS Latency is currently 11.

I am wanting to double the RAM to 8 gigs dual channel and I have the option of CAS Latency at either 9 or 11.

This laptop is used for business such as Office work, internet, email, streaming video, etc. In real world applications would I even notice the difference between my system running either 9 or 11 timings?


A:CAS Latency Question

I dont think it makes much of a difference. But of course, lower latency is better, but it doesnt mean it will bring a big performance boost. The boost will be miniscule.
Relevancy 18.06%

So newegg is offering the Acer 29" B6 B296CLbmlidprz IPS monitor for about 350. Seems like a pretty good deal but I can't find many reviews on it. I was wondering if anybody had any experience with this monitor and/or if you guys have better options for someone who is looking for an IPS monitor below 400 bucks. I want to game with it as well as do some 3d modeling and photoshop work. So I need reasonable response time for gaming. I was also looking at the HP ZR2440w and was gonna get that until I saw this deal on newegg for a larger monitor. 24" models are fine but if there are good deals on some 27" inch ones then I would be interested in those as well. Any suggestions? Thanks.

A:Question on Acer 29" monitor and other monitors

Heres the link for that monitor.
Relevancy 20.21%

I have put together a new build with the Gigabyte Assassin 2 m/board and a Corsair AX 860i PSU. On start up the PSU clicks out and won't run. The PSU Self test is good - green light and the fan is running, however when I connect all the peripherals the PSU just drops out and will not run. I have double checked all connections from the CPU, M/board, memory, graphics cards. This is all in a Thermaltake Level 10 case, my next check will be the hard drive connections - hot swap bays. Any help will be really appreciated.
Relevancy 20.21%

Hey guys I had some contractors doing some work on my house today and they needed to shut the circuit off to the room my computer was in The computer was on at the time so it shut off when the power was cut Now it won t go back on Power button does nothing at all and I don t know if it s the power supply mobo or switch I ve got a power supply tester which causes my computers fans to start up when it s plugged in so the power supply does respond not Power mobo button working... issue? The results are in the attached file It shows LL which means to low to register voltage for the - V line I honestly don t know if I even have that line so I don t know if that s bad I attached the label on my power supply too Would Power button not working... mobo issue? no voltage cause a computer to completely not respond Because the fans DO start up when the power supply tester is plugged in I don t think the switch is the problem because I tried to short the power switch jumpers with a paper clip and nothing happened I also took the CMOS battery out for a while and then tried it again and that didn t work Any ideas on whether I need a mobo or a power supply I don t have an extra PSU around to test with but I may try to find one before ordering a new mobo thanks in advance -mike nbsp

A:Power button not working... mobo issue?

Not the switch. Could be the motherboard or PSU, but I don't have any good insight.

I would unplug the PSU and flip the 120/240V switch to 240V, then flip it back before plugging it in. To me, this doesn't make any logical sense, but over about 16 years of playing with PCs I have seen it work twice.
Relevancy 19.78%

My brother in law has a got himself a free computer to which I am going to donate my old Sapphire X1950GT graphics card. The problem is, is that I can't easily wire it in to the computer as it has a crappy generic PSU with only one Molex and several Sata power plugs.
What I do have, without slicing and dicing and getting out the soldering iron, is the adaptor cable below. What I don't know is whether this has a sufficient amount of wires I.e. 0V and 12V to provide power to my G/Card.
Any ideas?



A:Wiring a graphics card to a generic PSU - sufficient power wires on plug?

System power consumption with a Sapphire X1950 GT is less than 250W. I think you will be fine with the splitter mentioned above. You probably don't need much extra power to run the card. I assume there is at least a 300W PSU or greater in the system.
Relevancy 18.49%

I have to be at a meeting in about 2 hours. We are on the beach in South Carolina. Our ISP, Hargray, constantly goes out. We are a condo association and have a group connection with little radio connectors in each building. We are more out than on line. I did a speed check and get a dl of 11.24, and an ul at 1.18. Does this matter in affecting my internet connection? I have an ipad and laptop and both get get nada. Please give me something to take to my meeting to make an intelligent statement. Thank you.

A:Internet Question Needs Quick Help

How did the meeting go?
Relevancy 18.06%

I have a 128gb samsung SSD. I was wondering what updates I can remove to get more space on the SSD because windows7+all updates are currently using half of the SSD space and somehow only 119gb of the SSD space is displayed so I'm guessing that 8gb is reserved or something.
I'm currently removing the extra languages and those are giving me and extra 5,5gb space

A:Windows 7 Ultimate updates and SSD question

Somehow I think you have more installed than Windows and updates. Internet Explorer, Bing Bar, and Bing Desktop are the only updates I have hidden. All other Windows Updates have been installed. I wouldn't put all the blame on WIndows, if you have an install using 60GB.

​Anyone with more than 8GB memory and still has Pagefile and Hibernation, by default has more than 16GB used by these two files alone. I recommend using them only if needed. I personally don't need them and have removed them both.

Check and see if you have a Hibernation file. If you don't use hibernation features, the file can be removed.

Windows 7 ? Delete Hibernation File (hiberfil.sys)
To turn off or disable hibernation, type the following command at the prompt:
powercfg ?h off
This will disable hibernation and will remove the hiberfil.sys file from your system.Click to expand...

Monitor your memory usage and if you have more memory than you ever use. The Pagefile can be minimized. I currently have mine turned off, with 8GB installed. But caution though if you turn the Pagefile off, Windows will not be able to compensate for a shortage of memory and the Windows session will crash. While I am comfortable not using a Pagefile, I do not recommend others do the same until they are comfortable doing so. I recommend lowering the Pagefile size to 1GB, and if Windows needs more, the size will be automatically adjusted.
Relevancy 20.64%

Hey how's it going. Any help would be great.
Had an older system so got a new motherboard and CPU. Installed it all and then no power when I try to switch it on. The orange modem light comes on but nothing else turns on.

New system-
Motherboard- z87-d3hp
CPU- i7-4770
Gpu- GeForce GTX 460
Ram- Kingston DDR 3
Psu- Shaw p4s6 860w.

Thank you

I also tried putting in one ram card at a time. Taking the graphic card out and using on board. Taking the motherboard out of the case to see if it was shorting out.

A:No power after motherboard install

Ratchetz said:

Hey how's it going. Any help would be great.
Had an older system so got a new motherboard and CPU. Installed it all and then no power when I try to switch it on. The orange modem light comes on but nothing else turns on.

New system-
Motherboard- z87-d3hp
CPU- i7-4770
Gpu- GeForce GTX 460
Ram- Kingston DDR 3
Psu- Shaw p4s6 860w.

Thank you

I also tried putting in one ram card at a time. Taking the graphic card out and using on board. Taking the motherboard out of the case to see if it was shorting out.Click to expand...

By any chance could you post a picture of your computer as it is hooked up right now so we can see if your missing anything. Try to check if the 4pin/8pin connector on the motherboard is hooked up and check for tightness of all the Motherboard connectors to start with.
Relevancy 21.07%

Hi im planning to maximuize my fans in my case Phantom But im not sure if My power Supply could Handle it Right now It Running on Phanton Case top MM fans rear mm fans and front mm fans Raidmax RX- K W ATX Power Supply ASRock GM-VGS FX AM w Radeon AMD FX- GHz Quad-Core Processor AMD Stock AM AM w Case Fan GB Supply Power x GB DDR MHz GB SATA Hard Drive DVDROM DVD Reader Power Supply Drive External USB Wireless N Adapter SAPPHIRE R GB DDR WITH BOOST Required watt My system is running fine now even if I put the fans controler into max speed but now im planning to maximize my fans in my case here is the fans status for my case Side x x mm included rpm Front x x mm included rpm Top x x mm included rpm Rear x x mm included rpm Bottom x mm HDD Pivot x mm Question Can my PSU handle everything for my system im also planning to upgrade my ram to gb or What is the Power Supply recommended for my system Or when im planning to upgrade my motherboard what would fit well with my system looking for slot ram or if my watt power supply strong enough to power thermaltake dual frio heatsink Thx you very much for trying to help nbsp
Relevancy 52.03%

How serious is this? I'm running on a Dell laptop with a Intel(R) ICH9M-E/M SATA AHCI Controller.

It is saying that I should back up all of my important files because of possible hard drive failure.

PLEASE HELP? I don't know how to fix this because I don't know what it means.

A:Hard drive is reporting a Smart Event error message

It telling you your hard drive is on its way out. You can try running a check disk and see if that helps. But to be on the safe side you should back up your personal files.
Relevancy 19.78%

Hello all I made a post regarding the performance failing of one of my supply power affect hard performance? drive/computer Faulty hard drives The conclusion we came to has unfortunately not resolved my problem and I am beginning to think my Power Supply may be the culprit Faulty power supply affect hard drive/computer performance? ------------------------------------------------------------------------------------------------------ Before I go into details here is my current Hardware Q GHZ GIGABYTE EP -DS R GB PC mhz x gb x gb Nvidia GTX mb requires x pin power adapters Asus Xonar soundcard requires floppy power adapters Windows x Jeantech W PSU modular PSU PCI-E nodes and nodes for other devices gb HDD operating system tb HDD data tb HDD data tb HDD data - added recently ------------------------------------------------------------------------------------------------------ My original problem in brief Upon accessing certain files in one of my TB drives I hear a distictive quot click lockup halt quot sound and then the entire system crashes first the drive will become inaccessible then windows explorer will crash followed by the mouse and eventually a BSOD after a minute ------------------------------------------------------------------------------------------------------ I bought a new TB a month ago to replace what then I thought was a failing TB drive Since the problems have become quot random quot and happen across all four drives tb tb gb tb I am now considering my PSU the culprit Jeantech Absolute w It seems logical to me Sometimes while performing tasks which put stress on several HDD s at the same time my computer is quot choking quot running as fast smooth as it should but with sudden freezes with those HDD quot click - stop - restart quot sounds Booting into windows is failing from time to time freezes on the quot starting windows quot screen or DISK BOOT FAILURE Insert system disk The PSU is modular - could certain quot plugs quot in my PSU are faulty I haven t tested this extensively but in some cases when the computer is not starting up at all using different power ribbon cable combinations seems to help Also I had to remove my DVD drive completely when I first installed the new TB I bought and I don t think my computer will start at all with it plugged in anymore so my PSU MUST be having a hard time coping with all the components If it is of any relevance I use an Nvidia GTX which requires x PCI-E pin power connections hard drives power is supplied via THREE modular ribbon power cables - two HDD s share power from the same ribbon cable lastly worth noting I use an asus Xonar sound card requires floppy power connector several symptoms suggest the PSU any thoughts nbsp

A:Faulty power supply affect hard drive/computer performance?

a 1000Watt shouldn't have any problem coping with the components that you have, i would recommend that u borrow a power supply from a friend and try it out on your computer, maybe the power supply is old and is not supplying proper voltages on all the rails....
Relevancy 18.49%

Hi there Tech Forum thanks in advance for your help - I have a question about a LAN and stuff There is a modem and a wireless router with LAN ports In one of them there is conected also a switch Network LAN Question with LAN ports - Some weird things have been going on I always get a wireless connection so LAN Network Question no problem there Issues appear with the wired network On one hand I had many times an unidentified network a x x x ip and no LAN Network Question network Nothing changed in configuration on my box or the router and got to connect at MB s while if connected through wi fi I got LAN Network Question more than MB s From a moment on again unidentified network and no signal in the adapter a yellow light would blink quick So now after touching the cable and a little bit of despair not driven to the computer by the way I have a full conection by lan and by wi fi both at a good speed AND weird for me a green light on and the same yellow blinking - So main questions are - What does the green light ON not blinking means - Could there be a difference due to the cable manipulation - Is there a gost inside my router D Thanks a bunch to all of you I try my best to understand computers so now I am happy with the connection but curious on the rest - Regards nbsp

A:LAN Network Question

How new are these devices? Are you using new 'patch' cables? Is DHCP running on only one of the devices? Seems weird that "touching the cable" caused a change.

1. The LEDs differ, but usually one signifies a connection [on/off] and the second signifies activity [blinking]
Relevancy 18.06%

Hey guys, I've been looking for a GFX card to upgrade my HD6870. I've already decided to go with an AMD R9 280X, I just don't know which model to buy yet.

Right now, the MSI 280X seems like the best option to me. But I use 2 monitors and the MSI 280X only has these connections:
Dual-link DVI-I x 1
HDMI (version 1.4a) x 1
Mini DisplayPort x 2

The monitors I use are a BenQ XL2411T (144hz) and a NEC LCD22WV (old).
The BenQ has: D-sub / DVI-DL / HDMI x 1
The NEC has: VGA 15 pin D-sub x 1

Would I be able to use my NEC screen with the MSI 280X and use my BenQ at the same time, with 144hz refresh rate? I read somewhere that a newer type of HDMI supports at least 120hz, though I couldn't find a clear answer to that. I am willing to purchase converters if needed.

A:Simple question regarding GPU - Monitor connections

I'd connect BENQ via DVI, then use miniDP > DVI > VGA adaptors for the NEC.

Also I don't know what games you are playing, but you're not going to get 144fps @ 1920x1080 with a R9 280x on most games.
Relevancy 18.06%

This is not intended to be a sob story but I just want you to know what it is all about. I have a niece that is slowly deteriorating from MS. She does not have much that she can do anymore but one of her enjoyments is playing a game called WSOP Challenge (world series of poker challenge). Right during Christmas the game stopped working and Sprint can't seem to help her get it back on her phone. She called me asking if I knew what to do and I tried but could not find any info on what she needed to do to get it working. Sprint told her to delete it from her phone which was not a good idea because I have found no where that she can download it from and put it back on her phone. Would anyone be so kind to give me some advice on how to fix her problem. Time is not on her side but what she does have left I want it to be very enjoyable. Thanks so much for your help.
Relevancy 21.07%

Hi can anyone help please, I just received my new Plait GTX Nvidia 770 Jetstream card and noticed it came with an 8pin and 6pin power requirement. They provided a 6pin to 8 pin adapter and I have a Corsair 650 TX PSU with 2 6pin power lines problem is the 6 to 8 pin adapter looks like it need both 6pin lines from the PSU to provide the necessary voltage/amps and that still seems to leave me short the other 6 pin port on the GFX card. Do I need to plug both 6 pin attachments in to the adapter or will one suffice?

A:GTX 770 Power Requirments

My bad, silly fool that I am I failed to realize both 6pin PSU power lines also have additionally the other 2pin lines required to make up the 8pin connection right along side. Thought I may need a newer PSU there! LoL
Relevancy 18.49%

Recently bought the GPU and realised that my current power supply wasn't quite good enough, so I went and bought an "emergency" PSU locally. Specifically an 850w PSU by Power Zone.

Now the GPU is amazing but sometimes I struggle to run some games on full settings, such as Assassins Creed 4, Shadow Warrior, etc. , and obviously I bought the card with intentions of running games on ultra with decently good FPS.

Now to the point, is it the PSU that could be holding me down? The recommended wattage on the AMD site stated it to be 750w. and I do believe that my system specs are pretty much good enough.

I'd also like to point out that a friend recently got a Radeon 7950 and claims to run above mentioned games on full settings with no problems. Again so he claims

Also included dxdiag info

A:Question about AMD Radeon 7990

May we ask what you and your friends PC specs are? It could be other variables at fault.

Never mind! Just noticed the specs are listed in the txt file.
Relevancy 20.21%

I gave my external hard drive to a friend but his laptop didn't recognize it. after getting it back, I connected it to my laptop but it didn't show up in disk management at all. the drive is receiving power since the light is on. I felt the drive upon connecting to laptop and noticed it tries multiple times to rotate the magnetic disk but in the end it come to a stop and nothing after that. I think my friend's laptop somehow damaged my drive since I'm sure it's a hardware problem.
So, I was wondering maybe any of you guys have an idea how to fix it if possible otherwise, I'd like to know if I can recover the data without spending for the experts?

A:WD external drive receiving power but not working

Hey armmzd. Sure sounds like a drive gone bad, and assuming you know it was good when you gave it to him,maybe it was dropped,etc. All I can suggest is going to the drive manufacturer's site and see if they have a drive diagnostic tool you can try.
Relevancy 18.49%

For Christmas I got another mm case fan aerocool shark rpm and I tried mounting it at the top of the case to suck out hot air as I have intakes and exhaust already but I couldn t seem to get the right screws to screw it in at the top my case aerocool fan cooling Case question strike x gt came with long screws for the top of the case but they are too thin to screw into the fan So instead I mounted the new fan on the side door on the top fan slot by the CPU as an intake and today when I played a new game that I got for Christmas BF I noticed the CPU temps would get rather hot I am using the stock intel cooler bear that in mind I was getting a max temperature of about degrees C after a roughly Case fan cooling question hour gaming session Would I benefit from making the new fan an exhaust by the CPU or would I be better off or is there a secret way of mounting a fan up there at the top as an exhaust that I son t know about as I imagine that way would be the best way to do things Also my graphics card could handle BF at all max p with FPS Thanks EDIT - To clarify I have intakes at the front one rear exhaust and the new fan as an intake on the side door by the stock CPU cooler nbsp

A:Case fan cooling question

hopgop1 said:

For Christmas I got another 120mm case fan (aerocool shark 1500 rpm) and I tried mounting it at the top of the case to suck out hot air as I have 2 intakes and 1 exhaust already but I couldn't seem to get the right screws to screw it in at the top, my case (aerocool strike x gt) came with long screws for the top of the case but they are too thin to screw into the fan. So instead I mounted the new fan on the side door on the top fan slot by the CPU as an intake and today when I played a new game that I got for Christmas (BF3) I noticed the CPU temps would get rather hot (I am using the stock intel cooler, bear that in mind) I was getting a max temperature of about 80 degrees C after a roughly 2 hour gaming session. Would I benefit from making the new fan an exhaust by the CPU or would I be better off, or is there a secret way of mounting a fan up there at the top as an exhaust that I son't know about as I imagine that way would be the best way to do things. Also my graphics card could handle BF3 at all max 1080p with 60+ FPS. Thanks. EDIT - To clarify I have 2 intakes at the front, one rear exhaust and the new fan as an intake on the side door by the stock CPU cooler.Click to expand...

With stock coolers, the fan on the intel cooler is pulling the air through the heat sink off the CPU and into the case away from it. By putting a fan blowing air down on the CPU, you are pushing the air back onto your cpu thus keeping the hot air hovering around it.

I would suggest swapping to exhaust.
Relevancy 18.92%

I have a Compaq dc5750 that would of had pc 5300 ram but it has none atm, but I have some pc 6400 will it work? I mean all the other specs are ok, but it's pc 6400. thx

A:Ram question

There is only one way to find out. That is to try it. If it does work it will not run at 6400 unless the motherboard supports that speed. If the motherboard only supports 5300, the memory modules will down clock to 5300.
Relevancy 20.64%

Hi guys I ve spent today building a pc for myself However on pressing the on button there s no reaction at all My machine specs are M B - Gigabyte GA- A-UD Processor - AMD RAM - Corsair Gb DDR Case - Zalman Z Graphics card - Gigabyte HD PSU - Corsair CX M W Wi-fi card also installed but can t remember the name and seem to have temporarily lost the box in a pile of packaging So far I ve checked the CPU and motherboard power sockets the wall plug sockets and the power cord to my PSU I ve also checked the connections between my case and the motherboard and these all appear to be correct on power build PC doesn't As part of this final point I switched the power on LED with the power button they both originate from the same location so thought they may be mixed up Anyhows I got a solid LED which suggests to me that a there s power running through the switch circuit and b the pc isn t booting when told to as a PC build doesn't power on solid LED would indicate PC build doesn't power on circuit completion which would be the equivalent of holding in the on button If anybody could shed any light on where to go next I d be eternally grateful currently searching the house for a paperclip to test the PSU nbsp

A:PC build doesn't power on

Does the CPU and case fans move at all, when pressing the power button?
Relevancy 20.21%


I have a printer
There is no lighting up
The power supply give
red wire about 7 V
blue wire about 11 V

Holding down the power button en stop/reset won't work

How can I test the logic board is defect?

Image logig board

Relevancy 18.06%

If I'm able to, how would I go about running a network hub from an existing port on the router?

I.E. Modem->Router->PCs/Hub->TV/PC

In theory I'm trying to run a wired connection to my room and have the ability to have my PC/TV and any other devices connected to the network physically, my wireless strength isn't exactly good and it's very inconsistent at best when it comes to my internet speeds makes it a bit harder to watch Netflix/Play games.

Any insight would be wonderful!

A:Question about a home network using a Linksys WRT54GS2

Modem > Router >

Then use a LAN port on the router to connect to a LAN port on the hub.
Relevancy 18.49%

Is there a way to know where on a laptop/tower the wi fi signal enters the computer? I'm just curious. TIA

A:WiFi Question

The WiFi signal enters though the antenna... In a laptop the antenna is around the display. In a desktop the antenna is either attached to the WiFi card directly or contained inside a USB WiFi device
Relevancy 20.21%

Its my first turned power Supply Flashback when LED is flashing on build and I think my motherboard isnt working but more specifically I want to know why the flashback led is flashing when I turn on the power supply Power is going into the motherboard the standby light comes on as well as the Flashback LED but when I attempt to turn the computer on with the power button Flashback LED is flashing when power Supply turned on on the case nothing happens I ensured both the ATX power connectors were fully in everything is connected RAM is in but the computer will not boot Also I might have have connected the power to the case in at the opposite ends ground to power and power to ground but it has been reversed and if that is the problem would I have to replace the case or the motherboard Here are the specs -ASUS M A motherboard -Fractal R ATX Tower Case -AMD FX- core AM GHz -Kingston GB in SSD -Corsair TX -Kingston gb HyperX DDR Ram nbsp

A:Flashback LED is flashing when power Supply turned on

No idea but slight suggestion Power supply???
Relevancy 18.06%

My motherboard is a Z77 Asrok Extreme 6.

It has four dimm slots. I have One kit of 8 gigabyte memory from Gskill that is DDR3. 'dual channel' (11-11-11-28) PC 2133.

If I get another kit of 8 gig from ANOTHER vendor and its different timings can I put them into the alternate slots and have it work? Say I buy Corsair (9-9-9-9) PC 1600. Would the two kits work against each other since they are different timings? Is this NOT recommended?

Here is another better question. What if I buy the exact same memory from Gskill and drop them in as well? So I have two kits of dual channel 8 gig ram for a total of 16 gigs. Both kits would be same type/speed and latency. Will this work or do I need to use 'quad channel'?

Edited for spelling.

A:Question about installing memory modules

Larsenex said:

If I get another kit of 8 gig from ANOTHER vendor and its different timings can I put them into the alternate slots and have it work? Say I buy Corsair (9-9-9-9) PC 1600. Would the two kits work against each other since they are different timings? Is this NOT recommended?Click to expand...

I'm thinking that different timings will cause issues with Dual Channel functionality. I'm also thinking that Dual Channel only functions if all modules can operate in dual mode. If you are not planning on operating in Dual Channel mode, I don't think it matters. However the modules should operate with the same timing, if they are to be linked together.

Anyway without actually knowing for sure, those are my thoughts.
Relevancy 21.07%

I got this laptop, neo, 1 1/2 year in my possession, it so happened that I accidentally hybernate I for a couple of hours, when I tried to open it, the there is no booting taking place., no fan,just the led light for charging/power , I have tried the hard reset as suggested in other forum, but the charging light just blinking as I press the power button( connected with the adaptor and w/o the the battery)
is there any one know my case?

A:Laptop won't power on

Remove the battery altogether; then hit the POWER key, which will drain any power left onboard.

Now reinstall the battery and connect to the A/C charger - - does it show as charging?

Wait a few minutes and then hit power on again - - it should resume from hibernation.
Relevancy 18.06%

I recently built a computer with the asus OCII GTX 770 gpu and ran a quick stress test with msi kombustor. I set the setting to no anti-aliasing and 720p resolution (not full screen) and ran the furry and tessy (gl4) stress test. At about 7 minutes my gpu got up to about 83 degrees C with fan speed at 100 percent. I stopped the test as I still don't know too much about stress testing and how hot I should really let my GPU get. I know the NVidia website says the max this card can take is about 98 C but I was wondering if at 7 minutes, 83 degrees C was normal or if that is too hot even for this stress test. Thank you.

A:Question about my stress test results for GTX 770

For a stress test, that's pretty normal on an GPU like that, stress testing pushes the GPU to it limits which most of the time is more than games will even push it. As long as your temp stays below the threshold NVidia says (Which in your case is 98) then your fine. I would however, if you want to improve the temp, see if you can improve the airflow around the GPU area, the Asus Cooling system is pulling in air and pushing it down on the GPU which means you have to move the air once its been pushed over the card. I would try adding a fan around the GPU exhausting if your worried.

But honestly, your fine.
Relevancy 20.21%

My mom gave me a Dell Dimension 4700 computer that was acting up. She said it would turn it's self off randomly and she thought it was a virus. When I brought the computer to my place, it powered on once, then I went to turn it on again and nothing. No lights, no power what so ever. So after doing some research I bought a new power supply for it. I just replaced the power supply and plugged the computer in and now there is a blinking amber light in the front and a solid green light on the motherboard but it won't turn on. I have checked all of the connections and they are properly seated. Any ideas what is causing the problem?
Relevancy 20.21%

My iphone 4S can not support whole day use as the battery nearly drain .

So I searched iphone 4S external battery in amazon and find Plush cartoon toys power banks AD below. The price is 29.99$ a little expensive as its 5200mAh. T (avoild link, delet url space when past in IE)

Also I found a external battery case here :

The battery capacity is only 1700mAh but can be used as a case protector for iphone 4s

Which one I should bought or

do anyone find the similar high capacity like 10000mAh but cheaper one in ebay or amazon and other place?

A:Power bank or external battery case?

Before you invest in more equipment, try to reduce power consumption (see this)
Relevancy 18.49%

My friend has a laptop and needs to get SD connectivity to be able to download into his computer. He has an HP 6565B laptop with an express card 54 slot. Is there an express card that has an SD adapter built in? Is the express card slot faster than usb 2.0? If not, I guess a usb 2.0 external card reader would be fine. Unless someone has a better idea. Thanks.
Relevancy 18.49%


it's kinda weird but last few months my pc was getting slower and slower, and when I decided today to format my pc it wasn't needed anymore, cause I started my pc on, typed pass and right after I typed the pass it goes directly to my desktop, programs starts directly all the same. It's like my pc is fast again...but the question is why???


A:Performance Question

I am not really sure what the cause of this is, but it happens to me every once and awhile.
Relevancy 20.64%

My father is having issues with his computer and shut down The computer turns on and runs fine It shut downs successfully as far as I can tell Fans stop spinning power LED turns off but then starts itself about or seconds later POST beeps are one short then about a second later a somewhat longer beep at a different tone deeper if I remember correctly I then get a quot Power Surge Detected possible faulty PSU quot warning The computer continues to boot to windows properly if I allow it I haven t tried holding the power button when windows is running I don t want to either but all other attempts to shut down from windows lead to the same end result I can shut down from BIOS Shut Down and Power Supply by pressing the power button and the system does not restart itself I m not sure where to look There have been no problems with the computer during usual use It runs fine I don t see any signs of a PSU issue although I m not terribly experienced there Temps are between and degrees C OS and drivers are fully updated I m not entirely certain if BIOS is fully updated or not Any ideas on what the issue could be Do I need to look into a new power supply I m going to try replacing the CX M with the Silencer MkII W from my gaming computer Power Supply and Shut Down this weekend to see if that resolves the issues Specs Intel i - Stock cooler Asus P Z -V LK Rosewill Line Glow Only of the blue LED fans are installed WD Caviar Blue GB Crucial Ballistix GB Asus Blu-Ray CDD Corsair watt CX M Running Windows nbsp

A:Power Supply and Shut Down

A faulty PSU can cause serious damage to other components. My first advice is do not start this PC up again especially in light of the warnings you are receiving. If you know of anyone who has a multimeter to test this psu it please have them do so.

Corsair is known for their quality power supplies but even they can ship out faulty ones. Let us know how the switching of the psu works.