Windows Support Forum

KB982670 .Net Framework 4 Client Profile update fails to install

Q: KB982670 .Net Framework 4 Client Profile update fails to install

KB982670 .NET Framework 4 Client Profile update keeps failing to install. The registry only shows versions 2, 3 and 3.5 but not 4. Is this why the update keeps failing? And if I don't have version 4, why does KB982670 keep trying to install?

PS - Do I need version 4, and if so, what else do I need to install to get this update to install? Any help really appreciated.

http://www.sevenforums.com/windows-updates-activation/384007-kb982670-net-framework-4-client-profile-update-fails-install.html
Relevancy 100%
Preferred Solution: KB982670 .Net Framework 4 Client Profile update fails to install

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Relevancy 100.19%

Installation log (Warning, very long: ? 2009 Microsoft Corporation. All rights reserved. Terms of Use. [5/2/2015, 12 - Pastebin.com

Tried Microsoft Fixit, didn't work.

A:Can't install .NET Framework 4.0 Client Profile, error 0x80070643

Bump

http://www.sevenforums.com/software/368789-cant-install-net-framework-4-0-client-profile-error-0x80070643.html
Relevancy 100.19%

Hi, I have re-installed my operating system, Windows Vistas, and loads of updates. however, I cannot seem to install .net framework 4. after saying it has installed successfully it then downloads it again to be re-installed. any ideas what might be wrong?
 

http://www.techspot.com/community/topics/net-framework-4-client-profile-for-windows-vistas-x86-wont-install.164853/
Relevancy 99.33%

Hi I'm running Windows bit I performed a clean install on a new hard drive I successfully ran a few updates with Windows update and eventually was offered the NET Framework Client Profile which i installed When i tried to check for updates after that it failed with error x f I have tried the quot FixIt quot tools from Microsoft none hav ehelped The only thing that allows me to check for updates succesfully is if I uninstall NET Framework Client Profile I downloaded more updates from the Microsoft catalog site specifically for NET hoping that these would fix the problem I have also tried reinstalling windows after having formatted the drive again and without any other software not even anti virus software running windows update The 4 causing Windows Update Client Error Framework .NET 0x8024402 Profile same thing happened the first few updates were succesfull but as soon as NET Client profile is installed checking for updates fails I have a few files that might be helpfull namely a Network capture .NET Framework 4 Client Profile causing Windows Update Error 0x8024402 taken during the attempted update check an excerpt from the WindowsUpdate log file Bottom line is though This problem only happens when i have NET framework Client Profile installed This is a very strange problem becuase I installed the NET Framework when it was released and have not had any issues with updates since then Its just recently since I reformatted Please help PS I had to append TXT to the cap file in order to upload it

A:.NET Framework 4 Client Profile causing Windows Update Error 0x8024402

So, I ended up intstalling .NET Framework 4.5 BETA and now I am able to check for and install updates through Windows Update.

http://www.sevenforums.com/windows-updates-activation/229315-net-framework-4-client-profile-causing-windows-update-error-0x8024402.html
Relevancy 89.87%

My windows 7 system had .Net Framework v. 4.5.1 installed and windows update notified me of a security update. Every time I try to install it, it fails with an error code 643. I did some googling and found a couple of things, including a Microsoft Fix-It (that didn't work) and a .NET Repair tool (that didn't work). So I went and uninstalled it completely. Then windows update shows an update available of course, the .NET 4.5.1 so I re-installed and it failed the install. When I re-boot I get an error saying I need to install .NET 4.0.30319.

what's going on? Why does it keep failing the install?
 

Relevancy 86.86%

Hello so last night a installed .NET framework 4.0 and I would like to uninstall it due to reasons causing a bit of problem. My question is it safe to remove it and will this remove .NET framework 3.5 as well as previous versions.

2nd question) Does .NET framework actually affect these applications such as adobe flash player,Web browsers(Chrome,Firefox)

I'm planning on using this tool

http://blogs.msdn.com/cfs-file.ashx/..._5F00_tool.zip

A:Is it safe to Uninstall .Net framework 4.0 kb982670?

Just uninstall "microsoft .NET framework client profile" form installed programs and reboot. It will NOT remove .NET 3.5.
What problem do you get?

http://www.sevenforums.com/windows-updates-activation/285697-safe-uninstall-net-framework-4-0-kb982670.html
Relevancy 86.86%

Is it possible to install the above on a computer running Vista Home Prem. 32bit?
I have tried and failed 4 or 5 times (ox800f0900)
I need it to update the maps for my Garmin Sat-Nav.

A:.NET framework 4 Client profile

Hi jonmal123,

Welcome to Vista Forums!

I'm not certain what you are trying to download, but here is what you need to install .NET Framework 4 on your system (and it is possible and it does apply as long as you meet the conditions): Download details: Microsoft .NET Framework 4 (Standalone Installer).

If you still have the problem, try the following solution proposed by MVP Mow Green in another forum (but first create a System Restore point and backup the Registry just to be on the safe side):

0x800f0900 CBS_E_XML_PARSER_FAILURE
unexpected internal XML parser error.

See if running this tool resolves the error:

AU Check (v78a)
http://www.codeplex.com/aureset/Rele...eleaseId=17263

Download and *save* it. After the download completes close all open
programs and browsers.

*** Temporarily disable the installed antivirus/security
suite/anti-malware/3rd party softwares. This includes all services nd
processes associated with them. Either consult the User Guide or the
manufacturer's web site to learn how this is accomplished.
You can use the following steps to Clean Boot Vista if the above task is
too complicated: How to troubleshoot a problem by performing a clean
boot in Windows Vista
http://support.microsoft.com/kb/929135

*Enable* the native Vista firewall as the system must be connected to
the net when the tool runs so that it can downloaded needed updating
software components. ***

Now run au_check_v78a_codeplex.exe by *right* clicking it and choosing
'Run as administrator'. Allow it time to complete it's operation.
Reboot afterwards.

See if the system can (install the) update now.

MowGreen [MVP 2003-2009]

I hope this helps.

Good luck!

http://www.vistax64.com/windows-updates/285793-net-framework-4-client-profile.html
Relevancy 84.71%
Relevancy 83.85%

Hello,

I was trying to install a CAT application (MemoQ) when the process got interrupted during the installation of .net framework client profile, version 4. I found out that this version is no longer supported, but I'm not sure if this is the issue, since I broke off the installation during the first time. Also, I used a cleanup tool, but to no avail.
As for RegEdit, the versions for Net Framework Setup that came with my Windows 7 version (installed it last December) are v2.05727, v3.0 and v3.5, so I'm well behind.
Do I need to clean out any files from the failed installation, and then move on to installing the proper version (which one? for Windows 7 Pro 64-bit)?

Many thanks,

Gerben

P.S. I tried copy-pasting the analysis from the MGDAT, but that doesn't work, sorry.

http://www.sevenforums.com/windows-updates-activation/392116-stuck-net-framework-client-profile-installation-version-4-a.html
Relevancy 82.99%

Hello I've been having problems for a while installing this client profile Here's the log of the action Please help CBS Log http www shared com file a VbsVp CBS html Code OS Version Platform Service Pack OS Description Windows - x Home Premium Edition Service Framework Error 0x80070643 Fatal - Microsoft .NET Profile 4 Client Pack CommandLine C f bfb bf a c dba Setup exe x x ia web TimeZone Pacific Daylight Time Initial LCID Microsoft .NET Framework 4 Client Profile - Fatal Error 0x80070643 Using Simultaneous Download and Install mechanism Operation Installing Package Name Microsoft NET Framework Client Profile Setup Package Version User Experience Data Collection Policy AlwaysUploaded Number of applicable items Exe C f bfb bf a c dba SetupUtility exe succeeded Exe Log File dd SetupUtility txt ServiceControl operation succeeded ServiceControl operation succeeded Microsoft .NET Framework 4 Client Profile - Fatal Error 0x80070643 ServiceControl operation succeeded ServiceControl operation succeeded Exe C Users Felix AppData Local Temp Microsoft NET Framework Client Profile Setup Windows -KB -v -x msu failed with x - null Exe Log Microsoft .NET Framework 4 Client Profile - Fatal Error 0x80070643 File CBS log Exe C f bfb bf a c dba SetupUtility exe succeeded Exe Log File dd SetupUtility txt MSI C Users Felix AppData Local Temp Microsoft NET Framework Client Profile Setup netfx Core x msi Installation failed Msi Log Microsoft NET Framework Client Profile Setup -MSI netfx Core x msi txt Final Result Installation failed with error code x quot Fatal error during installation quot Elapsed time LOG FROM USING Collect exe Code Collect OptionsFile CommandLine quot C Users Felix Downloads Collect exe quot Version Variant External LocalTime OSInfo Version Major x Minor x Build x db PlatformId x CSDVer Service Pack SPMajor x SPMinor x SuiteMask x ProductType x ProductInfo ProductInfoName Home Premium MachineMsiPolicy Reg Key HKEY LOCAL MACHINE SOFTWARE Policies Microsoft Windows Installer UserMsiPolicy Reg Key HKEY CURRENT USER SOFTWARE Policies Microsoft Windows Installer CLR mscoreeVersion CPU Branding AMD Athlon tm II X Processor String AuthenticAMD Stepping Model Family ExtendedFamily CacheLineSize CacheSize K Directories Temp C Users Felix AppData Local Temp WindowsDirectory C Windows CSIDL PROGRAM FILES C Program Files x CSIDL COMMON APPDATA C ProgramData CSIDL WINDOWS C Windows CSIDL SYSTEM C Windows system CSIDL PROGRAM FILES C Program Files x CSIDL SYSTEMX C Windows SysWOW CSIDL PROGRAM FILESX C Program Files x CSIDL PROGRAM FILES COMMON C Program Files x Common Files CSIDL PROGRAM FILES COMMONX C Program Files x Common Files C Type Fixed Total MB TotalFree MB CallerFree MB D Type CD Q Type Fixed FileList C Users Felix AppData Local Temp VSSetupEvents txt C Users Felix AppData Local Temp cbs log C Users Felix AppData Local Temp WindowsUpdate log C Users Felix AppData Local Temp ReportingEvents log C Users Felix AppData Local Temp dd dotNetFx Client setup decompression log txt C Users Felix AppData Local Temp dd dotNetFx Client x x decompression log txt C Users Felix AppData Local Temp dd dotNetFx Full setup decompression log txt C Users Felix AppData Local Temp dd dotNetFx Full x x decompression log txt C Users Felix AppData Local Temp dd SetupUtility txt C Users Felix AppData Local Temp dd TMP E tmp decompression log txt C Users Felix AppData Local Temp dd TMP D tmp decompression log txt C Users Felix AppData Local Temp dd TMPA C tmp decompression log txt C Users Felix AppData Local Temp dd vcredistMSI DE txt C Users Felix AppData Local Temp dd vcredistUI DE txt C Users Felix AppData Local Temp dd NETFXRepair log C Users Felix AppData Local Temp Microsoft NET Framework Client Profile Setup html C Users Felix AppData Local Temp Microsoft NET Framework Client Profile Setup html C Users Felix AppData Local Temp Microsoft NET Framework Client Profile Setup html C Users Felix AppData Local Temp Microsoft NET Framework Client Profile Setu... Read more

A:Microsoft .NET Framework 4 Client Profile - Fatal Error 0x80070643

Has the that particular frame work ever been installed on the machine, even in the beta form>? If So follow this:






Quote:
I'd suggest looking under [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services] on your computer to see if you already have a version of that service installed (maybe from an older beta or something like that?), and if so, manually remove it to see if that helps solve this error.

http://www.sevenforums.com/general-discussion/245839-microsoft-net-framework-4-client-profile-fatal-error-0x80070643.html
Relevancy 81.27%

I booted from my xp boot disc. It wouldnt upload service pack three so I had to download to my desk and upload it from there. It loaded and now has two Admins The original Admin and Admin with a number behind it.

...worked around most problems by reloading but Turbo tax wont reload it says microsoft.net framework4 client profile is messed up.

It messed up my outlook express , itunes and many other programs ...data was there and I fixed it...adobe is old version.

Is there anyway to get a disc that has alll the updates on it so this doesnt happen again? Is two admins going to cause a problem??? What can I do about microsoft framework 4...tried a couple things I found on internet but nothing fixed it.
Thanks!
Diane
 

A:Xp reloaded from boot disc now microsoft framework 4 client profile wont work

https://forums.techguy.org/threads/xp-reloaded-from-boot-disc-now-microsoft-framework-4-client-profile-wont-work.1087852/
Relevancy 74.82%

I keep getting an update from MS for .NET Framework 1.1 SP1 that fails to update. I have .NET Framework 3.5 installed om my XP SP3 machine. The update always fails and leaves to following message "Microsoft .NET Framework 1.1 Service Pack 1 Security Update for Windows 2000, Windows XP, Windows Vista, Windows Server 2008, Windows 7, and Windows Server 2008 R2 (KB953297)" I don't have any actual problems, but I never know if the update includes anything I should install or just the .NET update.

Any suggestions?
Darryl

A:.Net Framework Update that fails

As no logs have been posted, I am shifting this topic from the specialized HiJack This forum to the Am I Infected forum.==>PLEASE DO NOT NOW POST LOGS<== unless a log is specifically requested.

http://www.bleepingcomputer.com/forums/t/289417/net-framework-update-that-fails/
Relevancy 74.82%

I am having issues updating Mircrosoft .net Framework 1.1. This is happening on two machines. One is a laptop running Windows Vista Ultimate and the other is a desktop running Widows XP. I tried to uninstall it, but i just get an error saying: the installation source for this product is not available . . . I downloaded the .net Framework install from Microsoft's website and tried to install it. That did not work either.

Any ideas what needs to be done at this point?

Thank You
 

Relevancy 73.96%

When attempting to run a Windows Update, I get notifications that 3 updates fail.

I've run the SURT & SFC scan. SFC scan reported: "Windows Resource Protection did not find any integrity violations."
The error/codes copied from the Windows Update window are:

Code 80070057 Windows Update encountered an unknown error.

Code 9C48 Windows Update encountered an unknown error.
The error/codes copied from Event Viewer System log are:

Installation Failure: Windows failed to install the following update with error 0x80070643: Internet Explorer 11 for Windows 7 for x64-based Systems.

Installation Failure: Windows failed to install the following update with error 0x80070057: Security Update for Microsoft .NET Framework 3.5.1 on Windows 7 and Windows Server 2008 R2 SP1 for x64-based Systems (KB2937610).

Installation Failure: Windows failed to install the following update with error 0x80070057: Security Update for Microsoft .NET Framework 3.5.1 on Windows 7 and Windows Server 2008 R2 SP1 for x64-based Systems (KB2972211).

Windows logs are attached.
Thanks in advanced for the assistance!

A:Windows Update fails on IE 11 & .NET Framework 3.5.1

It looks to me as if you had some severe problems back in May this year - which were apparently fixed.
The question is... How did you fix these problems? 'Fixing' them by using a 'registry cleaner' could well produce the type of problem you are currently seeing.

Do you still have any System Restore points from around this time? (Please do NOT attempt to use them, if so - it may create even more problems)

Please post your C:\Windows\windowsupdate.log file.

http://www.sevenforums.com/windows-updates-activation/349051-windows-update-fails-ie-11-net-framework-3-5-1-a.html
Relevancy 73.96%

Hi,

Hopefully someone can help me. I'm running XP Professional with SP2 installed. I use automatic Windows Update. The Express Install option advises me that .Net Framework 1.1 SP1 is not installed. When I select the install option my computer appears to begin the installation but hangs during initialization- I've even left it overnight but nothing happens. I've trawled through various websites but can't seem to find a solution to my problem - Any ideas?

Steve

A:.Net Framework 1.1 SP1 Fails to Install

Download the redistributable here:http://download.microsoft.com/download/a/a...06/dotnetfx.exeAnd see if that works better

http://www.bleepingcomputer.com/forums/t/5261/net-framework-11-sp1-fails-to-install/
Relevancy 73.96%

Windows 7 SP1 32-bit OS
Dell Inspiron Desktop
4 GB RAM

I have reinstalled Window 7 Home Premium from and image backup on a partition on my hard drive. Everything appeared to be okay until the catch-up process of Windows Update started - there were about 130 updates to install. Eventually, most appeared to install okay but I have a persistent problem with Security Updates for .NET Freamework 3.5.1 (see fail notice at top of attachment). I then tried the .NET Framework Setup Repair Tool from the link in a forum message but that did not help. I also noticed when I looked at the Update History for my Window 7 installation that there had been a lot of failures. The remainder of the attachment shows the full update history.

I would be grateful for any assistance in overcoming the update problems.

A:.NET Framework 3.5.1 Fails to Install

Try this Fix the problem with Microsoft Windows Update that is not working

http://www.techsupportforum.com/forums/f217/net-framework-3-5-1-fails-to-install-836186.html
Relevancy 73.96%

Problem has been going on for many months.
My Windows XP PC continues to download .NET Framework updates. When I attempt to install them, they fail.
Here are the updates that fail to install:

Update to .NET Framework 3.5 Service Pack 1 for the .NET Framework Assistant 1.0 x86 (KB963707)
Microsoft .NET Framework 3.5 SP1 and .NET Framework 2.0 SP2 Update for Windows Server 2003 and Windows XP x86 (KB982524)
Microsoft .NET Framework 3.5 Service Pack 1 and .NET Framework 3.5 Family Update for .NET versions 2.0 through 3.5 (KB951847) x86
Microsoft .NET Framework 2.0 Service Pack 2 Security Update for Windows 2000, Windows Server 2003, and Windows XP (KB974417)

I read everything I could find online about this issue, but am unclear as to best way to proceed.
Any help?
Thanks.

A:.NET Framework fails to install

Current install could be damaged.Using Add/Remove Programs...I would uninstall all items reflecting MS.NET versions 1.0 thru 3.5...then I would install only 3.5, SP1.http://www.microsoft.com/downloads/details...;displaylang=enThen...I would go to Windows Updates for security updates related to such.Louis

http://www.bleepingcomputer.com/forums/t/331251/net-framework-fails-to-install/
Relevancy 73.96%

I have been trying to install the .NET Framework for multiple games, but it always fails to install. I have tried to install 4.0, 4.5 and 4.6. Each time, it says: "A fatal error has occurred during installation." Event Log says a newer version is already installed. Windows Update can't install it either, returning error code 643. Programs and Features says I don't have the .NET Framework whatsoever. I am attempting to remove the .NET Framework 3.5 via Windows Update > Installed Updates but it can't find it. On my list of Update History, it said its install was successful. For more detail, just ask.

Thanks in advance,
David W

http://www.sevenforums.com/software/388822-net-framework-fails-install.html
Relevancy 73.53%

XP keeps trying to install a security patch over and over again on start up, but fails with this message:Security Update for Microsoft .NET Framework 1.1 SP1 on Windows XP, Windows Vista, and Windows Server 2008 x86 (KB2698023)How do I fix this?(XP SP3. Virus/Firewall disabled during install)

A:Security Update for Microsoft .NET Framework 1.1 SP1 fails

This fix seems to have worked for many

Install the latest version of windows installer from here

https://www.microsoft.com/en-us/download/details.aspx?id=8483

Download and install KB2698023 manually.

http://www.bleepingcomputer.com/forums/t/475238/security-update-for-microsoft-net-framework-11-sp1-fails/
Relevancy 73.53%

MS Automatic Updates successfully downloaded installed f updates yesterday MS Automatic Updates was unable to successfully install Security Update KB for NET Framework Version I have tried to get a useful response from http support microsoft com gp wusupport in the past Initial response takes several days The response directs me to appropriate MS tech group Tried that Tried repeatedly on several issues No response ever That's why I'm here now Here's the relavent part of fails, log says handle update .NET Framework fusion.dll bad has 2.0 the quot Verbose quot eventog DDSet Status .NET Framework 2.0 update fails, log says fusion.dll has bad handle CustomActionData C WINDOWS Microsoft NET Framework v GAC System configuration dll DDSet Status ProductCode D-CD C- F - B -CD E E EF DDSet Status Calling Fusion on C WINDOWS Microsoft NET Framework v GAC System configuration dll DDSet Status Loading mscoree dll DDSet Status Loading fusion .NET Framework 2.0 update fails, log says fusion.dll has bad handle dll using LoadLibraryShim DDSet Error Error occurred while initializing fusion Setup could not load fusion with LoadLibraryShim Error The handle is invalid The Event Viewer for applications shows quot Product Microsoft NET Framework - Error Error occurred while initializing fusion Setup could not load fusion with Library Shim Error The Handle is invalid quot A similar problem occurs downloading installing DirectX V c Update The DXError log shows quot module dxupdate Mar file dxupdate cpp line function GetCachePath Unable to initialize CFusion module dxupdate Mar file dxupdate cpp line function CFusion CFusion Failed API LoadLibraryShim Error x - The handle is invalid quot I deleted the six KB files folders and its copies Made no difference The yellow shield quot update ready to install quot icon remains in my notification area If I click on it computer again tries to install update Fails However at shutdown there is a little multicolored shield at o'clock on top of the shutdown icon I click on shutdown the message is that the computer is installing the update don't turn off computer it will turn itself off After a few minutes it does shutdown by itself But at next startup update is not installed yellow icon still in notification area This happens every time at startup shutdown and is very annoying I found the NET Framework Version Redistributable Package The issue here is NET Framework Version I have not found Redistributable Package for NET Framework Version Regardless this backdoor method to get the NET update leaves the main issue unresolved NOTE The problem is not just with downloading installing the NET Framework update Direct X updates don't download install either and Windows Defender updates often fail The error log says there is a problem with the fusion dll and or the Cfusion cold fusion which is an Adobe Macromedia thing i e Real Time Messaging Protocol Raster to vector Macromedia Dreamweaver Export Control Classification Number etc THE ISSUE quot Failed API LoadLibraryShim Error x - The fusion dll handle is invalid quot Please provide assistance to resolve the invalid fusion dll handle or direct me to someone who can Thanks Rob XP sp MCE Dell I PentiumM GHz GB RAM

A:.NET Framework 2.0 update fails, log says fusion.dll has bad handle

I had a similar problem like this... but I couldn't figure out what it was, so I used the usb connection from my cable modem and then I could download and install Microsoft .Net 2.0. I found out that I had a faulty built in NIC

so I bought another NIC and havn't had a problem since...

http://www.techsupportforum.com/forums/f10/net-framework-2-0-update-fails-log-says-fusion-dll-has-bad-handle-108416.html
Relevancy 73.53%

Here s the relevant part of the very quot Verbose quot eventog most relevant in RED MSI s F C Executing op ActionStart Name CA CacheGACAssemblyDeferred F FC D A A BB MSI s F C Executing op ActionStart Name CA CacheGACAssemblyRB F FC D A A BB MSI s F C Executing 2.0 Installation Update Fails Of.net Framework Security op CustomActionRollback Action CA CacheGACAssemblyRB F FC D A A BB ActionType Source BinaryData Target RollBackToCacheAssembly CustomActionData C WINDOWS Microsoft NET Framework v GAC System configuration dll MSI s F F Invoking remote custom Installation Of.net Framework 2.0 Security Update Fails action DLL C WINDOWS Installer MSI tmp Entrypoint RollBackToCacheAssembly DDSet Status LANGID DDSet Entry PatchPFROAssembly started - Rolling back to preinstall state of the GAC DDSet Status CustomActionData C WINDOWS Microsoft NET Framework v GAC System configuration dll DDSet Status ProductCode D-CD C- F - B -CD E E EF DDSet Status Calling Fusion on C WINDOWS Microsoft NET Framework v GAC System configuration dll DDSet Status Loading mscoree dll DDSet Status Loading fusion dll using LoadLibraryShim DDSet Error Error occurred while initializing fusion Setup could not load fusion with LoadLibraryShim Error The handle is invalid How do I fix the fusion dll s handle Could someone point me in the right direction Thanks RobXP sp MCE Dell I PentiumM GHz GB RAM

A:Installation Of.net Framework 2.0 Security Update Fails

Are you doing the installation thru Windows Update or thru a file that was downloaded?If thru a downloaded file - the install file may have a problem - delete it and re-download and try installing againIf thru Windows Update What problem are you having with Windows Update? Use Internet Explorer for this task.http://support.microsoft.com/gp/wusupport

http://www.bleepingcomputer.com/forums/t/58803/installation-ofnet-framework-20-security-update-fails/
Relevancy 73.53%

Good morning I cannot update Net Framework to from nbsp I receive repeated failures with the following errors Net 4.5.2 with 1603 Update .Net fails Error Framework Framework log file shows PerformOperation returned translates to HRESULT x Other notes of interest in the log include Returning IDOK INSTALLMESSAGE ERROR Could not write value ImplementedInThisVersion to key Software Classes CLSID CB F -AB A- d - C - C FA A E InProcServer nbsp Verify that you have sufficient access to that key or contact your support personnel I verified the permissions on .Net Framework 4.5.2 Update fails with Error 1603 the above Registry key and ensured Administrators SYSTEM and TrustedInstaller all have Full Control nbsp I did note that the subkey quot quot does not exist however nbsp The only subkey present is quot quot Cause I am running the install with elevated privileges nbsp I have run the NetFixRepair tool with no success I am performing the install with a clean boot msconfig nbsp No non-MS services are running to interfere with the Net install I have run sfc scannow which completed some repairs and I rebooted the machine Even logged on as my admin account I receive the same result This computer is a standalone laptop not connected to any domain or network other than to my residential ISP service nbsp No GPOs are present to cause any issues The error first occurred via Windows Update I tried running the Net update on its own with my Internet connection with the same result nbsp I last tried with the offline Net downloaded installer package and the result is still the same The problem is not with the installer service as all other Windows updates install properly I have found nothing online with this specific scenario so I'm going straight to the source nbsp Is anyone familiar with this issue nbsp What other methods may I try nbsp I would really prefer to avoid rebuilding this machine if at all possible Please note that I am NOT a programmer developer and therefore not fluent in Net or its use my expertise is in Windows desktop and network server administration If anyone has any ideas please advise and assist nbsp Thank you very much Kim NetSpecI

https://social.technet.microsoft.com/Forums/en-US/ee278179-0824-489c-aebd-059d91834d59/net-framework-452-update-fails-with-error-1603?forum=w7itprogeneral
Relevancy 73.53%

Hi guys,

three updates according Microsoft .NET framework 4 always FAIL for like 2 months now, the update codes are KB2468871, KB2539636 and KB2533523 and the error code for the three updates is 643

im running Windows 7 starter 32 bits

Any help would be appreciated

Thank you.

Relevancy 73.1%

Hi I have Windows XP Professional Version SP I think I recently deleted SP with Revo Uninstaller thinking it was unnecessary I don't see any MSXL SP in my Add Remove programs I tried to do Windows Automatic updates and the following items failed to install -Microsoft NET Framework Service Pack and NET Framework Family Update for NET versions through KB x -Security Update for Microsoft NET Framework SP on Windows XP Windows Server Windows Vista Windows Server x KB -Update to NET Framework Service Pack for the NET Framework Assistant x KB And because of that I SP1 Think I to fails Framework .Net install 3.5 deleted and SP1 used the Net Framkework Remover Tool which deleted all the Net Framkeworks from my system Now when I go to Windows update it says No high-priority updates for your computer are available To check for optional updates return to our home page and click Custom Think I deleted SP1 and .Net Framework 3.5 SP1 fails to install I think Think I deleted SP1 and .Net Framework 3.5 SP1 fails to install I messed up my computer really badly And I'm not sure I have all the necessary MSXL These are all the MSXL that are listed in Add Remove programs MSXL SP KB MSXL SP KB MSXL SP Parser MSXL SP Parser KB

A:Think I deleted SP1 and .Net Framework 3.5 SP1 fails to install

Why do you need MSXL 4.0? It's not a requirement unless you have a program that needs it in order for it to run, same goes for .NET Frameworks.

http://www.bleepingcomputer.com/forums/t/503724/think-i-deleted-sp1-and-net-framework-35-sp1-fails-to-install/
Relevancy 72.24%

gt net Framework installation fails every time The log file and screen shot will provide more information Error Log Code OS Version SP Platform OS Description Future OS - x Unkonw Edition ProductType MSI Windows servicing CommandLine D a ded c c b Setup exe Using Simultaneous 4.5.2 .Net to Framework install Pack fails Developer Download and Install mechanism Operation Installing Package Name Microsoft NET Framework Developer Pack KB Developer Pack Setup Package Version User Experience Data Collection Policy Disabled Number of applicable items D a ded c c .Net Framework 4.5.2 Developer Pack fails to install b SetupUtility exe - Signature verification for file SetupUtility exe D a ded c c b SetupUtility exe failed with error x The cryptographic operation failed due to a local security option setting No FileHash provided Cannot perform FileHash verification for SetupUtility exe File SetupUtility exe D a ded c c b SetupUtility exe failed authentication Error - It is recommended that you delete this file and retry setup again Final Result Installation failed with error code x quot The cryptographic operation failed due to a local security option setting quot Elapsed time

A:.Net Framework 4.5.2 Developer Pack fails to install

Of course it does. .NET 4.6 is included in Windows 10, so you can't install 4.5.x on top of it.

The 4.6.1 developer pack says it's for Windows 10, so this should work.

Download Microsoft .NET Framework 4.6.1 Developer Pack and Language Packs for Windows 7 SP1, Windows 8, Windows 8.1, Windows 10, Windows Server 2008 R2 SP1, Windows Server 2012 and Windows Server 2012 R2 from Official Microsoft Download Center

http://www.tenforums.com/software-apps/58136-net-framework-4-5-2-developer-pack-fails-install.html
Relevancy 72.24%

HI
The above fails with an error "check for updates failed" in the gui.
Sometimes it determines the list of updates to get, but then fails to download those updates, sitting on the download screen and doing nothing.
Files are created C:\Users\adrian\AppData\Local\Dell\ClientSystemUpdate\temp but they never exceed 11.7MB.
Any ideas on how to solve this?
Is there a better logfile somewhere other than the bland gui messages above?

Adrian

A:E6420 Client System Update Fails

Hi Adrian
Before I go ahead and help you out, I would like to know following details:
1. When & where do you get this error message i.e. I mean do you get this message while installing windows update or updates related to any other 3rd party software?
2. Also please share the model number of the system?
3. Let me know the operating system which is installed on the system?
Please provide me following details so we can help you.
Thanks & Regards
Prateek K
#iworkfordell

http://en.community.dell.com/support-forums/laptop/f/3518/t/19462008
Relevancy 71.81%

I installed .net framework 2.0 already on my computer.
I get the following error message trying to install .NET Framework 3.5 sp1


XPSEPSC Installer: [2] Setup Failed on component XPSEPSC Installer

WapUI: [2] DepCheck indicates XPSEPSC Installer is not installed.Click to expand...

I tried installing .NET Framework 2.0 before 3.5 but it didnt work out either.

Also XPSEPSC installer is not completing when I downloaded and tried to install it.

Hope to get this sorted out. Thanks in advance.

I am using Windows XP sp3.
 

https://forums.techguy.org/threads/net-framework-install-3-50sp1-fails-with-following-error-message.1085455/
Relevancy 71.81%

I installed .net framework 2.0 already on my computer.
I get the following error message trying to install .NET Framework 3.5 sp1



XPSEPSC Installer: [2] Setup Failed on component XPSEPSC Installer

WapUI: [2] DepCheck indicates XPSEPSC Installer is not installed.

I tried installing .NET Framework 2.0 before 3.5 but it didnt work out either.

Also XPSEPSC installer is not completing when I downloaded and tried to install it.

Hope to get this sorted out. Thanks in advance.

I am using Windows XP sp3.

A:.NET Framework Install 3.50sp1 fails with following error message

Download the DotNet_FX_Cleanup_Tool. Uninstall all versions of .Net Framework. Then go back to Windows Update and download all the the Optional .Net Frameworks in the proper order, starting with 1.1 and ending with 4.0. Restarting when it asks.

http://www.techsupportforum.com/forums/f10/net-framework-install-3-50sp1-fails-with-following-error-message-683610.html
Relevancy 70.95%

I'm simply attempting to run update on my Windows 7 machine. Update will not run, downloading and running the SP1 update fails, downloading and running the Update Readiness Tool fails, trying to launch a troubleshooter fails. I ran sfc and have attached the log along with all the error codes screenshots. I have no idea how to proceed from here other than to drop this machine off at the nearest recycling center.

A:update fails, SP1 install fails, troubleshooter fails

Looks to me like you're having problems accessing the COMONENTS registry hive - although I would have thought that would also make a SFC scan fail.

I suspect I know what the problem is - let's see if a different tool can expose it...
I need to see a full copy of the report produced by the MGADiag tool
(download and save to desktop - http://go.microsoft.com/fwlink/?linkid=52012 )
Once saved, run the tool.
Click on the Continue button, which will produce the report.
To copy the report to your response, click on the Copy button in the tool (ignore any error messages at this point), and then paste (using either r-click/Paste, or Ctrl+V ) into your response.x

http://www.sevenforums.com/windows-updates-activation/377980-update-fails-sp1-install-fails-troubleshooter-fails.html
Relevancy 69.23%

The two recent driver updates to nbsp Intel Dynamic Platform and Thermal Framework Driver both fail to install on my XPS Specifically the Platform Driver Dynamic fails on to 9550 and XPS install Framework Thermal Intel drivers packages nbsp Chipset Driver YPN Y WN A EXE nbsp and nbsp Chipset Driver KDDXT WN A EXE the original driver nbsp Chipset Driver TWNH WN A EXE does seem to install correctly nbsp Really only the thermal manager portion fails After downloading and reviewing the inf files I can see the A and A driver have smilar inf files save the driver version numbers but the A working driver is different from the Intel Dynamic Platform and Thermal Framework Driver fails to install on XPS 9550 two in A I see nbsp INT DeviceDesc EsifManager INT in the INTEL NTamd and INTEL NTamd sections in A and A it is INT DeviceDesc EsifManager ACPI INT Here is the bottom of the driver failed install log Sorting action list for installation File - - Marking C Program Files x Intel Intel R Dynamic Platform and Thermal Framework ufx combined xsl for delete during uninstallation INF - Installing C Users james AppData Local Temp ESIFInstall drivers production Windows -x dptf acpi inf dptf acpi inf INF C Users james AppData Local Temp ESIFInstall drivers production Windows -x dptf acpi inf dptf acpi inf Execute command C Users james AppData Local Temp ESIFInstall x Drv exe -driverinf quot C Users james AppData Local Temp ESIFInstall drivers production Windows -x dptf acpi inf dptf acpi inf quot -flags -keypath quot Software Intel Difx quot Installation source C Users james AppData Local Temp ESIFInstall drivers production Windows -x dptf acpi inf dptf acpi inf DriverStore location C WINDOWS System DriverStore FileRepository dptf acpi inf amd a ffa eb e dptf acpi inf Package Requires Reboot no INF - Installing C Users james AppData Local Temp ESIFInstall drivers production Windows -x dptf cpu inf dptf cpu inf INF C Users james AppData Local Temp ESIFInstall drivers production Windows -x dptf cpu inf dptf cpu inf Execute command C Users james AppData Local Temp ESIFInstall x Drv exe -driverinf quot C Users james AppData Local Temp ESIFInstall drivers production Windows -x dptf cpu inf dptf cpu inf quot -flags -keypath quot Software Intel Difx quot Installation source C Users james AppData Local Temp ESIFInstall drivers production Windows -x dptf cpu inf dptf cpu inf DriverStore location C WINDOWS System DriverStore FileRepository dptf cpu inf amd ab a a dptf cpu inf Package Requires Reboot no INF - Installing C Users james AppData Local Temp ESIFInstall drivers production Windows -x esif manager inf esif manager inf INF C Users james AppData Local Temp ESIFInstall drivers production Windows -x esif manager inf esif manager inf Execute command C Users james AppData Local Temp ESIFInstall x Drv exe -driverinf quot C Users james AppData Local Temp ESIFInstall drivers production Windows -x esif manager inf esif manager inf quot -flags -keypath quot Software Intel Difx quot DriverPackageInstall error xE IIF will NOT initiate rebootExit code xE ResultCode - lt lt lt --- End of Vendor Software Log --- Vendor Software Return Code logo png Name of Exit Code SUCCESS Exit Code set to x Result SUCCESS Open file C ProgramData Dell UpdatePackage Log Chipset Driver YPN Y WN A txt This is the UI error I get Here is an image of the driver failing to install

A:Intel Dynamic Platform and Thermal Framework Driver fails to install on XPS 9550

Hi. I have the exact same issue on my 9550 using windows 10. Windows keeps trying to update it and it keeps right on failing. Tried downloading the version from dell site, unzipped, exact same set of errors. No resolution

http://en.community.dell.com/support-forums/laptop/f/3518/t/19670250
Relevancy 67.51%

I am to install driver Windows Update Kernel-mode Update: framework Unable unable to update Unable to install Windows Update: Update Kernel-mode driver framework the Kernel-mode driver framework ver for windows Unable to install Windows Update: Update Kernel-mode driver framework for x -based systems KB I get error Also I am getting BSOD stop errors in normal mode that say anything from -memory management x a - quot A device driver attempting to corrupt the system has been caught The faulty driver currently being on the kernel stack must be replaced with a working version quot GDRO sys- address fffff a f base at fffff datestamp b d I'm not sure if they are related When I run in safemode I do not get the BSOD When in normal mode I will get BSOD consistently when running Norton Full System Scan specifically when the full system scan gets to the Windows system folder System specs Processor Intel K Core Duo Unleashed MOBO Gigabyte GA-p A-UD P RAM I have x Corsair Vengeance only using stick of GB corsair vengeance currently due to troubleshooting GPU NVIDIA EVGA GTX HD HDDs Intel GB SSD and Western Digital Caviar Black TB empty PSU corsair watt Soundcard MOBO When I canoo

A:Unable to install Windows Update: Update Kernel-mode driver framework

I, again, apologize for double posting. I figure I should include the host of other issues I'm having. Maybe they can all be inter related.

-my DVD/RW drive, when connected to mother board in ANY SATA slot, causes the BIOS screen to freeze forever. I have disconnected the drive at this time while trouble shooting. I have tried known-good SATA cables so I know it's either the DVD/RW drive or perhaps a driver or mobo failure.

-I have run the memory diagnostic tool in windows. No issues were reported.

-I have NOT run memtest86 because I do not have a disk drive connected.

-I have had stop-errors (BSODS) such as PFN_list_corrupt, System_service_Exception, Memory_management, IRQ_not_less_or_Equal
All of these could be a result of bad RAM.

I have purchased new RAM as a means to fix my problems. It seemed to work for 2 weeks, then the stop errors returned.

http://www.sevenforums.com/windows-updates-activation/266002-unable-install-windows-update-update-kernel-mode-driver-framework.html
Relevancy 64.93%

My PC keeps trying .Net update won't Framework install 1.1 to install the Net Framework update KB .Net 1.1 Framework update won't install but it keeps failing The Update is it says that fails is Microsoft NET Framework .Net 1.1 Framework update won't install Service Pack Security Update for Windows Windows XP Windows Vista Windows Server Windows and Windows Server R KB I recently cleaned some malware rootkit and hijacker stuff off my PC so I m not sure if that could have caused this update to keep failing Note I know there are newer version of the Net Framework but my PC doesn t seem to have them installed my Add Remove programs only shows the Microsoft Net Framework However I do remember it showing the and the X can t remember if it was or before I ran a dotnetfx exe from microsoft that removed all the Net stuff from my PC so it removed all versions Since then automatic updates isn t picking up the other Net Framework versions it s only finding the version update Anyone have any thoughts on how to get this update to install Or do I even need Could I just install the newer versions and if so how do I do that

A:.Net 1.1 Framework update won't install

Re .Net Framework problemsThis topic probably covers all your questionshttp://www.bleepingcomputer.com/forums/t/264765/security-update-kb953297-fails/Worth reading, may help.FYI - The following are now installed on my computer:Version 2.0Version 3.0Version 3.5 SP1Version 1.1 does not seem to be necessary and when it is offeredas an update, if it will not install, you can select 'Don't show this update again'.No program has called for the 1.1 version; until that happens, I regard it as unnecessary.Uninstall other versions first.Install:cumulative update for .net framework 3.5 SP1http://www.microsoft.com/downloads/details...;displaylang=enYou should then update through Windows Update.

http://www.bleepingcomputer.com/forums/t/270396/net-11-framework-update-wont-install/
Relevancy 64.93%

The update: Update to .NET Framework 3.5 Service Pack 1 for the .NET Framework Assistant 1.0 x86 (KB963707)

Update type: Important

The update to .NET Framework 3.5 Service Pack 1 for the .NET Framework Assistant 1.0 for Firefox addresses several compatibility issues with version 1.0 of the extension

My OS and protection:
Vista Home Basic
AVG 8.5
SPYBOT
This keeps wanting to install and won't. I do not use firefox either. How do I install it or stop it from coming up? I didn't find any solution in the MS website only others with the same problem and no solution.

I've gone into Control panel/programs and features and the program Microsoft.NET Framework 3.5 SP1 was installed 4/13/2009
So it's there to be updated.

http://www.techsupportforum.com/forums/f217/update-net-framework-3-5-sp1-will-not-install-or-go-away-421443.html
Relevancy 64.93%

Running Windows Home Premium x Cannot update attempting to upgrade to Win professional Discovered automatic updates were fried for some time and the system did not install home 8007370B error cannot update, fails, Win7 update SP1. - have SP which is apparently required for the upgrade I see similar threads each seems to require advanced individual registry repair Win7 home update fails, error 8007370B - cannot update, install SP1. so starting my own - if there is a generic fix please reply with it and I can give it a shot I have tried the normal tools to fix without change- see below Symptoms Windows updates fails with an error code B - Windows Update encountered an unknown error I have run SURT several times successfully I have run Fixit MicrosoftFixit wu LB Run Each returns 'Repair Windows Update components' Win7 home update fails, error 8007370B - cannot update, install SP1. and 'Windows Update components must be repaired' All claim to have fixed the problem no change naturally Attempted Win7 home update fails, error 8007370B - cannot update, install SP1. to run SFC scannow from an elevated prompt and it fails with 'Windows Resource Protection could not perform the requested operation' Same behavior when attempted from Safe Boot Downloaded and attempted to install SP locally both the all platforms version and the Win x version Both fail with errors Ran the Norton remover tool and Macafee remover tool - think Norton came with the system but was never activated ran the Macafee remover tool just to be sure Have renamed the Softwareupdate folder without any change Uploaded CBS logs Download CBS zip from Sendspace com - send big files the easy way

A:Win7 home update fails, error 8007370B - cannot update, install SP1.

See most of the repairs require the components file as well

Download COMPONENTS.zip from Sendspace.com - send big files the easy way

http://www.sevenforums.com/windows-updates-activation/281843-win7-home-update-fails-error-8007370b-cannot-update-install-sp1.html
Relevancy 64.5%

These came up on auto updates yesterday. They won't install. I have tried the Microsoft Update site, uninstalling and reinstalling .NET Framework 3.5 and downloading Microsft Installer 4.5. None of this worked and I don't know what else I should do. It doesn't seem to affect my system at all. I want it to either insrall properly or get rid of this nuisance update. Advice please.


Microsoft .NET Framework 3.5 SP1 and .NET Framework 2.0 SP2 Update for Windows Server 2003 and Windows XP x86 (KB982524)
Microsoft .NET Framework 3.5 Service Pack 1 and .NET Framework 3.5 Family Update for .NET versions 2.0 through 3.5 (KB951847) x86

A:Microsof .NET Framework update won't install

In Start -> Control Panel -> Add/Remove Programs uninstall your .NET Framework installations.After uninstalling all your .NET Framework, download .NET Framework Cleanup Tool and execute it and clean up any configuration data that was left behind.Then connect to http://windowsupdate.microsoft.com with Internet Explorer and do a Custom Update. In Optional components you will have the .NET Framework installers listed. Select the one required by the software you are using on your system. If you are unsure, install them all.Then your updates will install properly.

http://www.bleepingcomputer.com/forums/t/351602/microsof-net-framework-update-wont-install/
Relevancy 64.5%

It tells me updates are available. I try to download Microsoft .NET Framework 1.1 Service Pack 1 and it gives me error 652. What's up with this and how can I fix it? Thanks in advance!

http://www.vistax64.com/software/186277-cannot-install-update-microsoft-net-framework.html
Relevancy 64.5%

I just installed Windows 7 Embedded (Windows Thin) on a USB Stick and booted it.

I'm trying to installed .Net Framework 4 and it keeps telling me to Update Windows first.

So I tried updating windows but I keep getting the 80070005 error.
I googled the error and I came across this

Basically I should download subinacl.msi and install it in c:\windows\system32
but when I do I get this: error 2755 1632

I have no idea what to do next. I can't install .Net Framework, can'y update windows, I can't do anything.

I even checked if the TEMP folder is encrypted, it's not.
Any advise?

A:Can't install .Net Framework or Update Windows

Please answer your other thread

http://www.techsupportforum.com/forums/f217/cant-install-net-framework-or-update-windows-696690.html
Relevancy 64.5%

Yesterday Windows Update offered me security update error .NET (re)install/update Framework ! 4 for NET Framework KB The install failed and the cause .NET Framework 4 (re)install/update error ! might be i recently deleted C Windows Installer not a smart move but it grew way too big some months ago .NET Framework 4 (re)install/update error ! had some Visual Studio uninstall problems as well removed it with the clean up utility but i'm not sure it was done well I already tried Uninstalling Framework from Windows Add Remove Programs no luck using Windows Install Clean Up no luck using NET Framework cleanup tool removed it cleaning with CCleaner for registry temp files Reinstalling it from Windows Update no luck amp Manual Install with both Web and Standalone Installer full and client version no luck More Details -I still have Microsoft NET Framework NGEN v X and X services even if i get error on trying to start them quot the system cannot find the file specified quot -On manual install it rollbacks the progress during installation of Net Framework Client profile then i get fatal error and a windows setup error I attach the log file along with the setup utility log file MSI log rar archive and screenshots of the windows setup error and Event Viewer logs Any suggestions Thanks in advance

A:.NET Framework 4 (re)install/update error !

Run the DotNetFix Cleanup tool and remove all versions of .Net Framework and restart. Now download the Windows Installer. After that go back to Windows Update and download all the .Net Frameworks in the right order leaving 4.0 to be the last.

http://www.techsupportforum.com/forums/f217/net-framework-4-re-install-update-error-605936.html
Relevancy 64.5%

Notice it has zero size! unfortunately as it's classed as critical I'm unable to download any other updates until this has been installed, help welcomed
 

Relevancy 64.5%

Well, bought a new video card, a XFX Radeon HD 4850 1gb DDR3, and while installing the drivers and CCC, it says that I need to have Framework 3.5 SP1 installed to use.

So, I went to update.microsoft, downloaded, and on install attempt, it says "DotNetFXInstallBlock.exe has encountered a problem and needs to close."

This happens every time I attempt to install it.

It's the 32 bit version by the way. (x86)

It doesn't even reach any menus or user agreements.

Any help is greatly appreciated, and thank you for your time.
 

https://forums.techguy.org/threads/cannot-install-new-framework-3-5-sp1-and-family-update.890557/
Relevancy 64.5%

i got an update message from windows update to install the following:

Microsoft .NET Framework 3.5 Service Pack 1 and .NET Framework 3.5 Family Update for .NET versions 2.0 through 3.5 (KB951847) x86

i went to the update site and downloaded from it directly (instead through the automatic update icon/feature)

it downloaded completely but failed on installation.

the error message was:
Suite Integration Toolkit Executable has encountered a problem and needs to close. We are sorry for the inconvenience.
i am uploading/attaching the error report file generated.

i tried this many times, and it failed to install even after restarts.

i have winXP SP2 with all windowXP updates except SP3.

i hope this info is sufficient for you to diagnose what went wrong - with my comp, or with me.
regards
biren

A:HELP! .NET Framework 3.5 update failed to install

FWIW: http://www.google.com/search?hl=en&q=S...mp;oq=&aqi=I guess that I have to ask...if the prompt came via WUS, why didn't you use it?IMO, it's possible you downloaded the wrong package...also possible that the download became corrupt/damaged.You might check Event Viewer for possible related documented errors, How To Use Event Viewer - http://www.bleepingcomputer.com/forums/t/40108/how-to-use-event-viewer/ Louis

http://www.bleepingcomputer.com/forums/t/229116/help-net-framework-35-update-failed-to-install/
Relevancy 64.5%

I admit to being a cheap SOB and have bought second han Dell Latitude D610 from work. For security they have COMPLETLY wiped hard drive and only reloaded original Window XP. I have neen working through all sorts of issues in loading all the drivers etc for a week of nights and have almost made it but I am having an issue in loading the MS update. I get the following message in automatic Updates window.
"The following updates were not installed
Microsoft .NET Framework 3.5SP1 and .NET Frammework 2.0 [email protected] Update for Windows Server and Windows XP x86 (KB982524)"
Are they important. I think I need them to get the Dell Program Manager to work to download all the drivers (I have done most by transferring to stick from desktop.)
 

A:MS .NET framework update install fail

Right-click MY COMPUTER, then click Properties. What's the version of Windows XP that's currently installed in that computer?

If Windows XP was reinstalled in that computer, it needs to be upgraded to SP3 first and then have all the post-SP3 high priority updates installed before you start installing any optional updates.

----------------------------------------------------------------

Since it's a Dell computer, there should be a sticker on the case with a 7-character "service tag number". Advise what that number is.

----------------------------------------------------------------
 

https://forums.techguy.org/threads/ms-net-framework-update-install-fail.937799/
Relevancy 64.5%

My automatic updater keeps telling me I need to install the latest security update for Net Framework 1.1. I've tried a number of times and always get a failure report. The logs say Ox643 is the error code. Looking this up on the MS site was no help. Any ideas about how to get past this? I really don't need Net Framework ( I think), so would un-installing it be an option to remove the nuisance reminders about updating it?
 

Relevancy 64.5%

Security Update for Microsoft .NET Framework 1.1 SP1 on Windows XP, Windows Vista, and Windows Server 2008 x86 (KB2656370) can't be installed on my Clevo (Mesh) D480W. Windows automatic updates keep proposing it but keeps failing since yesterday morning.

Thanks for help.
 

Relevancy 64.5%

Running Win 8.1 on a Lenovo U530 (factory specs).
I can't update the microsoft.net framework to 4.5.2 or 4.6.1.
I've tried a clean boot, the microsoft.net framework repair tool and windows update repair tool. The update repair tool fixed 3 issues and after doing so showed that there was no framework update for my pc. As soon as i began to manually download it however,
i then got a popup saying there were updates (surprise surprise, it was .net framework finally coming to its senses). And of course it didn't mean squat, the update still fails. 
On further attempts of various methods I did notice that the .net framework version 4.5.2 fails to install, while the 4.6.1 will "rollback" its installation, although this doesn't seem to have any effects ill or otherwise. 

https://social.technet.microsoft.com/Forums/en-US/0729df31-db37-47c0-820e-fd0790c8d81e/microsoftnet-framework-will-not-updateinstall?forum=MTCWin8
Relevancy 64.07%

I did a repair install of W7 Ult. x64 SP1. Applied all updates, but if fails to install IE10 update :

Attachment 286642

(as you see it is a dutch version).

If have run sure & sfc /scannow. Both report no problems.
CBS files are attached.
Please help ?

A:Windows update fails to install IE10 after repair install

Ok, it is working now. Steps I took :

1) Hide the update for IE10
2) Download and tried the installer for (my localized) IE10 : failed to install
3) Started windows update, suddenly there where 43 optional updates available including IE9
4) Installed all optional updates except IE9
5) Retried the installation of IE10 (not visible any more in updates) : succes

Hope someone else can bennefit,

Regards, Jan

http://www.sevenforums.com/windows-updates-activation/305609-windows-update-fails-install-ie10-after-repair-install.html
Relevancy 63.64%

This problem has been occuring for awhile and is preventing my windows XP from being up to date. It's now preventing me from running certain games and applications that require an up to date windows install. In general it's probably not good either ! I can't install the .NET framework updates for SP2. It seems to work, but then when I log back in it always asks me to update the same ones. I'm not sure what's going on or if there is a way to manually install them? Any help would be appreciated. Thank you!

Thank you!

 

http://www.techspot.com/community/topics/cant-install-net-framework-with-windows-update-xp-issue.186119/
Relevancy 63.64%

Windows Update  KB 2901983 failed to install. error code 643.  Consequently I am unable to install Adobe, Photoshop Elements 13. The problem is occurring on  Dell, Latitude notebook model E6400, Intel Core 2 Duo CPU, Windows 7 Ultimate, 32-bit.  How can I determine what's preventing the update from installing and correct the problem? 
 
 

http://www.bleepingcomputer.com/forums/t/570680/microsoftnet-framework-452-update-failed-to-install/
Relevancy 63.64%

I try to install "Security Update for Microsoft .NET Framework 4 on Windows XP, Windows Server 2003, Windows Vista, Windows 7, Windows Server 2008 x86 (KB2446708)" using windows Automatic update service, in many times, but i can't. Always show "66A error". Windows update center only show error for this "Microsoft .NET Framework 4 " update. (Other updates successfully install.) Then i manually downloaded its .exe installer and try to install it. Then i receive this error. How do i install this security update?


Windows Update center error.


Manual installation error.

A:Why can i install Security Update for Microsoft .NET Framework 4?

Try this:

Error code 66a .net framework 4 - Microsoft Answers






Quote:
A. Click on Start and click on Control panel.
B. Go to Program and Features.
C. Scroll down to Microsoft.Net Framework 4 Client Profile, right click it.
D. It will give you a choice of Uninstall/Change, click it.
E. Then, it will give a choice to Repair it, pick Repair it. It will take about 4-10 minutes to repair (with my PC) your experience may vary.
F. When completed, go to your update center, and update it again.

http://www.sevenforums.com/windows-updates-activation/162474-why-can-i-install-security-update-microsoft-net-framework-4-a.html
Relevancy 62.35%

I was running a number of automatic updates most of them installed quot Security Update for Microsoft NET Framework SP on Windows XP Windows Vista and Windows Server x KB quot did not I just keep receiving quot Error Code x quot So far I ve tried a number of fixes to no avail I cannot really remember the exact links But I tried two different Microsoft FixIts intended for similar problems MicrosoftFixit wu LB RunMicrosoftFixit ProgramInstallUninstall MATSKB RunI ve also tried Miscrosoft s NetFxRepairTool And finally I tried installing the newest version of Windows Installer and getting the file manually but when I go to install quot NDP sp -KB -X quot it just keeps telling me quot The feature you are trying to use is on a network service that is unavailable Click OK to try again or enter an alternate path to a folder containing the installation package netfx msi in the box below quot and it shows me this box where I can browse for a location I have no idea what the location would be or even if what it wants is actually on this computer On a side note I ve been having this message pop up in my browser allot lately quot Security Warning Although this page is encrypted the information you have entered is to be sent over an unencrypted connection and could easily be read by a third party Are you sure you want to continue sending this information quot Mostly if not only Microsoft sites keep telling me this It also seems that every Microsoft site I visit wants me to log on to Windows Live which might explain that but it s never done that before and isn t doing it on any other computers I own Security (KB2698023) .NET on Update 1.1 Cannot Windows for Framework install Microsoft XP SP1

A:Cannot install Security Update for Microsoft .NET Framework 1.1 SP1 on Windows XP (KB2698023)

Download the KB2698023 to desktop and try to install from there -Next run the automated troubleshooter in this KB article from start to finish, reboot & see if the update will install:? How to fix MSI software update registration corruption issueshttp://support.microsoft.com/kb/971187If no joy, see...? You receive ?0x80070643? or ?0x643? error codes when you try to install .NET Framework updates through Windows Update or Microsoft Updateshttp://support.microsoft.com/kb/976982Now try the first link again -If these are the ones you have used, please post back and we can look for other ways to install -

http://www.bleepingcomputer.com/forums/t/475327/cannot-install-security-update-for-microsoft-net-framework-11-sp1-on-windows-xp-kb2698023/
Relevancy 61.92%

Hi.
An update fails to install.
It tells me this:

Code: 57A

"WindowsUpdate_0000057A" "WindowsUpdate_dt000"

It's an update for spamfilter for Microsoft Outlook.(I'm not even sure I have Outlook. -At least I don't use it.)
I would like to successfully install it, or at least get rid of it so it doesn't annoy me about a pending update.

Help appreciated. =)

A:Update fails to install

Which update (KB number) is this? If you don't have Outlook on your system, and this update pertains to it, then this might explain the failure.

You can hide this update http://www.sevenforums.com/windows-u...n-updates.html so that it doesn't bother you in the future.

http://www.sevenforums.com/windows-updates-activation/85309-update-fails-install.html
Relevancy 61.49%

Hi,

I cannot install this as I keep getting an error saying it cannot be installed. I don't necessarily want it, I just don't want the update to display anymore. Is this possible?

Do I need another update to replace it?

Thank you,
Lynne
 

https://forums.techguy.org/threads/cant-install-windows-net-framework-1-1-service-pack-1-security-update-kb953297.881742/
Relevancy 61.06%

I have a Dell Desk top using Windows 7 Home Premium. I get notifications constantly to Update KB2862330 388 KB to my Computer. It fails to configure this Microsoft update over and over, but the notifications continue over and over. I cannot stop the update
notifications.,, can you help me with this please. All other updates are successful in updating 100 % percent. This KB2862330 shuts down @ 11% and will not configure...

A:Update KB2862330 fails to install

You can try disabling notifications for this individual update by going into control panel checking for updates, when the update appears you can check the box to hide the update. (Sorry I don't have any pending to give you a better walk through)
OR
Manually download the update from Microsoft and do the install.

Let me know if either helps

https://social.technet.microsoft.com/Forums/en-US/1f85a559-9091-4afc-9929-3f22b1050573/update-kb2862330-fails-to-install?forum=w7itprogeneral
Relevancy 61.06%

Windows update keeps reminding me to install a Security Update for Microsoft .NET Framework, version 2.0 (KB928365). No matter how many times I download the 14.7mb file and successfully install it, the update shield keeps reappearing to remind for another installation of the same update. Would appreciate help in resolving this issue. Thanx.

A:windows update fails to install

I am having the same problem. Will someone please help?
Thanks

http://www.techsupportforum.com/forums/f10/windows-update-fails-to-install-170662.html
Relevancy 61.06%

Ok update to fails install [SOLVED] here is the deal I was having problems with my router and was receiving help from this site on another thread when I suddenly couldn't get online I did some research and found out that I had malware that prevented me from getting an IP address and caused me many many headaches to fix After almost days without being able to get online I finally found a fix that resolved my issue a complete repair install of XP [SOLVED] update fails to install After that I was finally able to get online but one of my drivers was causing a BSOD error I think that's how you say it and I remember when my computer completely crashed back in February and I did a complete XP re-installation I had the same problem I remember that the fix was to download the XP updates So I go to Microsoft Windows update site and try to download the program that lets you use the site for XP updates and keep getting an error message quot The following updates were not installed Update for Background Intelligent Transfer Service BITS and WinHTTP KB Microsoft Windows Installer quot When I go to Windows Update History instead of saying that it failed and allowing me to see why it failed it says that it was cancelled and I can't find out why I have tried six times to download this update to no avail and am ready to get out the hammer I plan on getting a new computer within the [SOLVED] update fails to install next month but I need this one to work until then My stress level is already through the roof with work so when I say I'm ready to take a hammer to this SOAB computer I mean it ANY help would greatly be appreciated

A:[SOLVED] update fails to install

Dont get teh hammer out yet..

try a manual install of the update-
http://www.microsoft.com/downloads/d...displaylang=en
* if your system does not validate, your XP install key is no good
or
Try clearing the Windows download directory, and then visit Windows update again.
To do this, follow these steps:
Stop the Automatic Updates service. To do this, follow these steps:
Click Start, click Run, type services.msc, and then click OK.
Right-click the 'Automatic Updates' service, and then click Stop.
Minimize the Services snap-in.
Empty the SoftwareDistribution directory. To do this, follow these steps:
Click Start, click Run, type explorer, and then click OK.
Open My computer - local disk C - Windows - SoftwareDistribution
( or paste this in the address bar: C:\Windows\SoftwareDistribution\ )
empty the folder
Start the Automatic Updates service. To do this, follow these steps:
Maximize the Services snap-in.
Right-click the Automatic Updates service, and then click Start.
Close the Services snap-in window.
Visit the Windows Update Web site

http://www.techsupportforum.com/forums/f10/solved-update-fails-to-install-387033.html
Relevancy 61.06%

I run XP SP3. Automatic updates is turned on and works all the time except this one:Microsoft .NET Framework 1.1 Service Pack 1 Security Update for Windows 2000, Windows XP, Windows Vista, Windows Server 2008 (KB953297)It would seem that this is an old update as I run SP3 and this appears to be an SP1 update. If there are more updates it installs them but fails on this one.The machine works fine. Is this a symptom of a larger issue?Thank You

A:Windows Update fails to install

That update means it is for .NET Framework 1.1-SP1. SP1 refers to the NET Framework,not your XP version.
Go to the Windows Update website,let it scan your computer for updates and this update shows again,try to install it there.If it fails again then don't worry about it.
Have you checked your"Add/Remove Programs" to see if you have .NET Framework 1.1 installed on your computer,or .NET Framework 1.1 SP1?

http://www.bleepingcomputer.com/forums/t/340899/windows-update-fails-to-install/
Relevancy 61.06%

For about 3 months now, my mother's laptop, which runs Windows Vista, has been out of date update wise because one particular update, KB2443685, fails too install. I've tried everything I can think off, even manually downloading the update itself, and it still won't install. The Error code is 80070490 So if you can, please let me know what the problem is. I'd be truly grateful for your help.
 

A:KB2443685 update fails to install

Have you tried disabling your antivirus first?

Are all subsequent updates also failing to install?
 

https://forums.techguy.org/threads/kb2443685-update-fails-to-install.986383/
Relevancy 61.06%

Running Windows 2000 Pro SP4. All Microsoft updates download and install without problem except NET.Framework 1.1 Service Pack 1. The update downloads fine but fails to install. No error message just fails to install and recommends trying again. No other perceived problems.
 

https://forums.techguy.org/threads/windows-update-fails-to-install.373641/
Relevancy 61.06%

A software update for the bing bar 6.0 was received onn Mar 8, and every time I shut my system down I get a message to not to turn of the power because software is being installed (KB2459075). It fails every time but i can't find any meassage why it failed.
I am NOT using the Bing bar, & would just like to get this fix out of my system
Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows 7 Home Premium , 32 bit
Processor: Pentium(R) Dual-Core CPU T4200 @ 2.00GHz, x64 Family 6 Model 23 Stepping 10
Processor Count: 2
RAM: 3003 Mb
Graphics Card: Mobile Intel(R) 4 Series Express Chipset Family, 3 Mb
Hard Drives: C: Total - 227397 MB, Free - 176460 MB; D: Total - 10972 MB, Free - 1218 MB;
Motherboard: Wistron, 3612, 09.66, 2CE927T5DX
Antivirus: Norton AntiVirus, Updated and Enabled
 

A:Bing Bar update install FAILS

On IE. Go to tools, manage add ons, and uninstall or disable bing tool bar.

Or use ccleaner/tools/uninstall/run uninstaller

or review http://www.sevenforums.com/browsers-mail/23619-how-remove-bing-toolbar.html
 

https://forums.techguy.org/threads/bing-bar-update-install-fails.988831/
Relevancy 61.06%

After help cleaning the Malware and junk from this laptop the windows updates fail to install. I rebooted and retried to no avail. I couldn't find a wi 8 problem like this so I'm asking if anyone can help clear this up?

Relevancy 61.06%

Sorry for the short title, I didn't know how to word my issue.

My problem started when I had started getting BSOD's. To fix I had de-fragmented (didn't work) and then I had to do a system restore which appeared to fix it although it didn't keep my files instead deleted them. I tried installing a game on steam that required framework 3.5 but It failed to install giving me this error code: '8007371B'. I had researched and found no luck with finding any fixes, it's not even heard of. I tried doing a factory reset with comes up with the same error code, I have also tried upgrading to win 10 and using a media (installation disk) to install which had no luck and come up with the same error code.

I am desperate as soon I will not be able to upgrade to windows 10.

-Fraser J-

A:Windows 8 fails to update, install etc. Please help.

It's a problem with your Boot Manager. Your Boot Manager is what boots into Windows, and a problem with it can cause ou to not be able to boot into Windows.

First thing to try is something called 'Startup Repair'. You'll want to follow this guide: http://www.bleepingcomputer.com/tutorials/http-wwwbleepingcomputercom-tutorials-automatically-repair-windows-8-with-automatic-repair-/

If that doesn't work, you'll need to reformat the PC. If you can't repair the boot manager though there's going to be no other options. You'll lose your data so do try Startup Repair first.

The reformatting will work for sure, but regardless, once you're up and running I would recommend that you start backing up your data regularly. Either a disk imager like Macrium Reflect or a snapshot tool like Rollback Rx. Either will do the trick but you'll want to start backing up your data.

http://www.eightforums.com/bsod-crashes-debugging/75486-windows-8-fails-update-install-etc-please-help.html
Relevancy 61.06%

I have tried to install the nvidia update (see the pic),
but It fails at some point of the progress. Also, why doesn't it download the file, because after pressing "install" it doesn't start to download the file, has it done it already? The file is about 245mb. Has my PC downloaded a corrupt download which causes why the setup fails? Any ideas?

Thanks.

A:nvidia update - fails to install

Hello Deepndark,

You might see if you may be able to download the NVIDIA driver directly from NVIDIA at the link below instead. You'll just need to select the model number of your graphics card/chip.

NVIDIA Driver Downloads - Advanced Search

Hope this helps,
Shawn

http://www.sevenforums.com/windows-updates-activation/311957-nvidia-update-fails-install.html
Relevancy 61.06%

when windows update fails to install a KB, and it lists it as FAIL.

why wont it reinstall or re-download ?? Or does vista reinstalls it when you restart the computer?

A:when windows update fails to install?

Try it from the administrator account. Do you see custom and express?

http://www.vistax64.com/windows-updates/220661-when-windows-update-fails-install.html
Relevancy 61.06%

I keep getting an update for my printer,Brother 2240D series, 4.7MB. I think I can remember it loading successfully about 6 months or so ago? The printer works OK but the update is still there even after I try to update it? Theres no problem except that its annoying. Can I get rid of it?

A:Printer update fails to install.

Is it a Windows update?. If so just hide it.

http://www.sevenforums.com/windows-updates-activation/397609-printer-update-fails-install.html
Relevancy 61.06%

I have Windows 7 Ultimate 64bit. I went to install the update KB2454826 by way of windows update, and I got a "failed to install" error.
It specifically gave me: "WindowsUpdate_80073712" "WindowsUpdate_dt000"
I went and manually downloaded this update to install it myself, and the entire install process went as normal until the end, and it gave me a fail install error again. I rebooted my computer between each attempt.
Can anyone provide for me some information on how to correct this?
Thank you.

A:Update KB2454826 Fails to Install

the WinSxs folder is damaged.

Please start the command prompt (cmd.exe) with admin rights [1] and run sfc [2]:

sfc.exe /scannow

Is it able to find and repair broken files (create the txt file shown under [2] and look if all files are restored)? If not, replace the DLL with the file from your DVD [3]. Also try the
System Update Readiness Tool for Windows [4].

Are you now able to install the updates? If not, please run the Windows Explorer and go to the folder "C:\Windows\Logs\CBS\" and copy all files to your document folder (otherwise you can't upload it), zip all files into 1 ZIP and upload the zip to
your SkyDrive [5] and post a link here.

best regards
André

[1]
http://windows.microsoft.com/en-US/windows7/How-do-I-run-an-application-once-with-a-full-administrator-access-token

[2]
http://support.microsoft.com/kb/929833
[3]
http://blog.nirsoft.net/2009/09/17/how-to-extract-missing-system-files-from-the-dvd-of-windows-7vista/

[4]
http://support.microsoft.com/kb/947821
[5]
http://social.technet.microsoft.com/Forums/en-US/w7itproui/thread/4fc10639-02db-4665-993a-08d865088d65
"A programmer is just a tool which converts caffeine into code" CLIP- Stellvertreter http://www.winvistaside.de/

https://social.technet.microsoft.com/Forums/en-US/78ed25a3-9eb0-4bd4-abdd-f64c572be7f6/update-kb2454826-fails-to-install?forum=w7itprogeneral
Relevancy 61.06%

I've been trying to update my Nvidia driver and so far have had no luck.

I've got two 570's in SLI running great on version 290.53 but all attempts to update my driver to 295.73 end in failure.

I've tried doing a standard install and also doing a custom install with the "Clean Install" box checked on the driver's options screen when starting the install.

I may be missing something, but going through the device manager and uninstalling the driver there first only leads to Windows automatically starting a driver search, preventing me from installing the one I want. Also using the control panel to uninstall them reaches the same point.. windows automatically installing a driver (285 version)

Any ideas, guys?
Specs are listed where they should be below.

A:Cannot install Nvidia 295.73. Fails During update

  
Quote: Originally Posted by Gromit1710


I've been trying to update my Nvidia driver and so far have had no luck.

I've got two 570's in SLI running great on version 290.53 but all attempts to update my driver to 295.73 end in failure.

I've tried doing a standard install and also doing a custom install with the "Clean Install" box checked on the driver's options screen when starting the install.

I may be missing something, but going through the device manager and uninstalling the driver there first only leads to Windows automatically starting a driver search, preventing me from installing the one I want. Also using the control panel to uninstall them reaches the same point.. windows automatically installing a driver (285 version)

Any ideas, guys?
Specs are listed where they should be below.


Had this happen before , get this file - run - then select Nvidia - select the nvidia files - follow the prompts . restart the computer - when asked if you want to install the video driver / new hardware found / select NO . install the new driver ..

All should be good in Nvidia land ..

http://www.sevenforums.com/drivers/215790-cannot-install-nvidia-295-73-fails-during-update.html
Relevancy 60.63%

For more than weeks I have been trying to install windows security update KB and i will fail to install giving error code x I looked up this error code online and it means NOT DOWNLOADED but I am sure it was downloaded because I fails install Windows update KB2564958 to went directly to microsoft com and looked up the stand alone of this update and downloaded it and my download manager showed the progress bar downloading KB which I saved to desktop but when I tried to onstall it the setup was interrupted at the beginning saying Setup was cancelled I have scanned my pc with Spybot Malwarebytes Superantispyware Norton Security suite Windows update KB2564958 fails to install and they found no viruses or troyans at all note that I don t have any antispyware actively monitoring on task-bar I use all of them manually to scan so there is no conflicts I ran Chkdsk and found no errors I ran Registry First Aid and clea-ned the registry to no avail this up-date will not install There must be some bug or this update was corrupted since they offered it I have tried several options that I found online and did not solve the issue My Norton protection and all other softwares never interfered with Microsoft Updates I contacted Microsoft support and after they gave me a list of several options to solve the problem that I followed to the letter to no avail they asked me to use and pay phone support and I replied to them that Microsoft offers FREE complete support for problems related to Windows security updates and I refuse to pay for that support That was a week ago and they have not responded at all they left me on my own I don t know if some of you have had problems trying to install this update but if you found a solution please share it with us nbsp

Relevancy 60.63%

Hi,

I am trying to install Windows Update KB3074543 but it fails over and over. If anyone has any suggestions/thoughts, please let me know.

Thanks,
Kevin

A:Windows Update KB3074543 fails to install

Please follow the Windows Update Posting Instructions
and post the requested data

If the file is too large (8MB compressed), remove the older CBSPersist cab files until the final file is below the limit - you can always post them separately after zipping them. (the forum doesn't allow the upload of bare CAB files, for a number of reasons)

Please also post the C:\Windows\windowsudpate.log file

http://www.sevenforums.com/windows-updates-activation/383120-windows-update-kb3074543-fails-install.html
Relevancy 60.63%

First of all I'm new here so try to be patient as I stumble through the rules Normally I'm pretty good at fixing software issues but this one has me stumped I have a machine running Win h p which seems to have installed any other updates fine but always chokes on IE throwing quot Code C Windows Update encountered and unknown error quot As a side note I've never seen it encounter a known error What I have done with no success Renamed the SoftwareDistribution folder Turned off Norton's Uninstalled IE and reinstalled it said I had a newer version of IE installed after I had removed it and rebooted Tried downloading and running the redistributable installer for IE All failed I IE10 fails Windows install in *Only* Update have since downloaded and run SURT run an sfc scan and checked the Windows error log while I waited There are loads *Only* IE10 install fails in Windows Update of instances of this in the event viewer quot Installation Failure Windows failed to install the following update with error x Internet Explorer for Windows for x -based Systems quot I compressed a copy of the CBS folder and attached it Thanks in advance for any help Greg

A:*Only* IE10 install fails in Windows Update

The errors from the CheckSUR log are these....

Code:
Unavailable repair files:
servicing\packages\Package_1_for_KB2817183~31bf3856ad364e35~amd64~~9.4.1.0.mum
servicing\packages\Package_2_for_KB2817183~31bf3856ad364e35~amd64~~9.4.1.0.mum
servicing\packages\Package_for_KB2817183_RTM~31bf3856ad364e35~amd64~~9.4.1.0.mum
servicing\packages\Package_for_KB2817183~31bf3856ad364e35~amd64~~9.4.1.0.mum
servicing\packages\Package_1_for_KB2817183~31bf3856ad364e35~amd64~~9.4.1.0.cat
servicing\packages\Package_2_for_KB2817183~31bf3856ad364e35~amd64~~9.4.1.0.cat
servicing\packages\Package_for_KB2817183_RTM~31bf3856ad364e35~amd64~~9.4.1.0.cat
servicing\packages\Package_for_KB2817183~31bf3856ad364e35~amd64~~9.4.1.0.cat
The CBS.log appears to be incomplete - it ends a lot earlier than it should do - but still shows the following error....

Code:
2013-08-06 14:30:23, Info CSI 0000009d [SR] Beginning Verify and Repair transaction
2013-08-06 14:30:24, Info CSI 0000009e [SR] Cannot repair member file [l:20{10}]"csrsrv.dll" of Microsoft-Windows-Csrsrv, Version = 6.1.7601.18113, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, file is missing
Please reboot and post the new CBS folder - meanwhile I'll try and produce a fix protocol for the CheckSUR errors.

http://www.sevenforums.com/windows-updates-activation/300142-only-ie10-install-fails-windows-update.html
Relevancy 60.63%

I cannot get my windows update to work correctly. WU 7.2.6001.788 tries to install itself and fails. I've changed the name of the software distribution directory to "erase" the memory of old updates and that worked but still no luck installing WU.

THanks in advance for your help.

A:Windows Update 7.2.6001.788 Fails to install

Try installing the standalone package manually from here: How to obtain the latest version of the Windows Update Agent to help manage updates on a computer

http://www.vistax64.com/windows-updates/219649-windows-update-7-2-6001-788-fails-install.html
Relevancy 60.63%

This is my husbands computer (way more computer illiterate than me) and I cannot get it to update.  I have run mamb, mamrootkit, tdskiller, adwcleaner, junkremovaltool and tweaking all in one repair.  Running microsoft security essensials(mse) for security as well as superantispyware and mbam.  Still nothing.  rkill run in safemode and rerun of mbam.  still nothing.  I searched the forum using won't update, KB951847, etc. but found no real answer.  Any help would be appreciated. It is this website that saved my laptop so hopefully you can help here too.

A:KB951847 XP update downloads but fails to install

Remove .NET FrameworkRun the .NET Framework cleanup toolReinstall .NET FrameworkGo to Windows Update and let it install all the updates for .NET Framework.

http://www.bleepingcomputer.com/forums/t/494616/kb951847-xp-update-downloads-but-fails-to-install/
Relevancy 60.63%

I'm using Windows XP, SP3. My computer is a Dell Optiplex GX270 (full tower, not the smaller horizontal things), 3.20 GHz processor with 1GB RAM.

I tried to use Windows Update today after finding out that I 11 critical updates. They all downloaded, but when it goes to install, it just fails. I've turned off my anti-virus, and my firewall. I've restarted, and nothing is working. I'm stumped.

A:[SOLVED] Windows update fails to install?

Is this right after you installed SP3?

Try this:

1. Re-register the Windows Update DLL with the commands below

Click Start, click Run. or Windows key + R (faster)

Copy and paste each of the following commands. Press ENTER after each command.

regsvr32 wuapi.dll
regsvr32 wuaueng.dll
regsvr32 wuaueng1.dll
regsvr32 wucltui.dll
regsvr32 wups.dll
regsvr32 wups2.dll
regsvr32 wuweb.dll

Restart computer.

Then run the update again . .

http://www.techsupportforum.com/forums/f10/solved-windows-update-fails-to-install-272578.html
Relevancy 60.63%

Windows update KB974431 x86 always fails to install on my Windows 7 rtm build 7600 ultimate x86.

Any solution ?

A:Windows update KB974431 fails to install

I've read here and elsewhere that this is due to an invalid key, supposedly you need to remove your bad key, extend the trial period if necessary, and then you can install the update

http://www.sevenforums.com/windows-updates-activation/30700-windows-update-kb974431-fails-install.html
Relevancy 60.63%

I have been trying for the past 2 months to get KB952241 to install, but it continues to fail. And I cannot get any help from Support except to direct me to this forum. So, if there are any MS people on this thing, please advise as to how to get this installed. I have log files from the installation if needed. Thanks.

A:KB952241 Windows Update Install Fails

This is a Security Patch for Microsoft Visual Studio 2008 ... Do you have this installed??

http://www.sevenforums.com/windows-updates-activation/24979-kb952241-windows-update-install-fails.html
Relevancy 60.63%

My computer has Windows XP Service Pack 3.
Everytime the computer tries to install the latest update, which is Security Update for Microsoft .NET Framework 1.1 SP1 on Windows XP, Windows Vista, and Windows Server 2008 x86 (KB2833941), it fails (Error Code: 0x643). I tried to follow the fix-it steps from http://support.microsoft.com/gp/windows-update-issues/en-us, but when I tried to download and run "Fix This Problem" I couldn't open the file type (diagcab). I also tried method 2 but the update still didn't install after the restart.
 
Thank you for any help or advice.

A:latest update fails to install everytime

You mean method 2 from here: http://support.microsoft.com/kb/976982/ ?
This is the method...
 
Uninstall .NET Framework 1.1. Then download the .NET Framework Cleanup Tool and unzip and run.
From the drop-down box, select 1.1 and clean.
Reinstall .NET Framework 1.1
Download and install .NET Framework 1.1 Service Pack 1
Visit Windows Update or Microsoft Update and let it install the rest of the 1.1 updates including KB2833941.
Check if it's installs and report back.

http://www.bleepingcomputer.com/forums/t/501133/latest-update-fails-to-install-everytime/
Relevancy 60.63%

Hi,
I have my PC set to automatic updates. I have no problems with installing the updates apart from KB2698023. It fails to install and I get a message saying, "Security Update for Microsoft .NET Framework 1.1 SP1 on Windows XP, Windows Vista, and Windows Server 2008 x86 (KB2698023)". The Windows Updater keeps trying to install this update, and it fails every time. Is there anything I can do to rectify this problem?

Many thanks.

A:Security Update KB2698023 fails to install.

Download DotNetFX_Cleanup Tool uninstall all versions of .Net Framework. Go to Windows Update and download .Net Framework in proper order, starting with 1.1 and ending with 4.5

http://www.techsupportforum.com/forums/f10/security-update-kb2698023-fails-to-install-681367.html
Relevancy 60.63%

Update, Net Framework 1.1 service pack 1 fails to install. Message : Fatal Execution Engine Errow (0x7927baca). Also, view of history of update, Errow Code (0x80131506) Installation Failue
 

A:Net Frame work update fails to install

.NET Framework? Try downloading it again from Microsoft.
 

https://forums.techguy.org/threads/net-frame-work-update-fails-to-install.662670/
Relevancy 60.63%

Hey guys,
I am having this problem quite a long time now. Whenever I want to install updates from windows update in order to be able to upgrade from Windows 8 to 8.1, it shows me message while rebooting: Failure configuring Windows updates, Reverting changes, Do not turn off your computer. Then showing me couple of these multiple times:
and yes, you guessed it, I am once again where I started. I tried literally everything I found on the internet, and nothing ever worked. I just want to upgrade to Windows 8.1(which I can't aswell but I think the reason why, is Windows Update). My last chance is reinstalling Windows but I would like to solve this with different option. Thank you for any tips or anything that could eventually lead to solving this problem of mine.

A:Windows update fails to install updates

This is a BSOD problem. Please create a topic over there and include reports needed with your report.

http://www.eightforums.com/windows-updates-activation/62740-windows-update-fails-install-updates.html
Relevancy 60.63%

Four days ago Fails After Upgrade KB976902 Install Update I did a Windows Update for KB Ever since then update has failed to work Restore to a prior state did not work Chkdsk MS FixIt sfc etc have failed to run or failed to work I had hoped that the Repair Install might do it Unfortunately at Step after of files have been copied Mb I get the following message IMG file C Users MichaelM AppData Local Temp Upgrade Fails Install After KB976902 Update moz-screenshot- png IMG quot Setup can't Upgrade Fails Install After KB976902 Update continue Restart the computer and restart Setup When prompted try getting the latest updates quot I've tried this twice with the same result I am running Win Professional x on a gb SSD Custom i build w gb ram I strongly suspect it is the same problem the prevents Windows Update from working correctly TrustedInstaller exe uses of the CPU cycles without accomplishing anything Additionally there is an error generated every - seconds TrustedInstaller exe is running I can only stop the error messages by manually stopping the wuauserv service There are basic messages of which one is shown at the bottom Anyone encountered or solved this problem I recognize that I can do a fresh install but I want to avoid it because of the great hassle in reloading everything In fact except for updates the system runs as stable and fast as ever That makes me think there is a relatively simple fix Thanks and sorry for the length of this message Fault bucket type Event Name WindowsWcpOtherFailure Response Not available Cab Id Problem signature P P base wcp sil merged ntu ntsystem cpp P Windows Rtl SystemImplementationirectRegistryProvider SysOpenKey P P c P xda ce P P P P Attached files C Windows Logs CBS CbsPersist cab C Windows Logs CBS CbsPersist cab C Windows Logs CBS CbsPersist cab C Windows Logs CBS CbsPersist cab C Windows Logs CBS CBS log C Windows servicing Sessions Sessions xml C Windows winsxs poqexec log C Windows System LogFiles Scm SCM EVM C Windows Logs CBS FilterList log These files may be available here Analysis symbol Rechecking for solution Report Id - - e - - cf Report Status

A:Upgrade Fails Install After KB976902 Update

Out of courtesy I will be starting a new thread referencing this one since, at this writing, it is a year and a half old. I am having very much the same problems, although I am not absolutely sure that they began with installation of the KB976902. An MS telephone support tech says to backup and format. I want to do an in-place reinstall, if that will return my Windows functionality. I'll post a new thread with the SUR log, in hopes someone may be able to provide instructions how (and whether) I can replace the missing component store objects or delete/repair their invalid references.

http://www.sevenforums.com/windows-updates-activation/139147-upgrade-fails-install-after-kb976902-update.html
Relevancy 60.63%

As the title says this particular update fails to install. It tried to automatically one day and still does every time I shut down my laptop.

Error code is: 80070005

CBS zip is included as attachment.

Have thuroughly checked my computer for viruses and malware and its totally clean, also went through steps to remove any corrupted files but it still wont install.

Help greatly appreciated.

A:Windows update KB3035583 fails to install

I can't see any attachment?

That said the 70005 error does have at least one known cause...
https://support.microsoft.com/en-us/kb/968003

http://www.sevenforums.com/windows-updates-activation/370828-windows-update-kb3035583-fails-install.html
Relevancy 60.63%

Quote Some Updates were not installed The following updates were not installed Installation Failure Windows failed to install the following update with error x Microsoft NET Fails Install [SOLVED] to Microsoft Update Framework Service Pack Update for Windows Server and Windows XP [SOLVED] Microsoft Update Fails to Install x KB Installation Failure Windows failed to install the following update with error x Microsoft NET Framework Service Pack Update for Windows Server and Windows XP x KB Installation Failure Windows failed to install the following update with error x Microsoft NET Framework SP Update for Windows Server and Windows XP x KB Installation Failure Windows failed to install the following update with error x Microsoft NET Framework SP and NET Framework SP Security Update for Windows Windows Server and Windows XP x KB Installation Failure Windows failed to install the following update with error x Microsoft NET Framework SP and NET Framework SP Update for Windows Server and Windows XP x KB Installation Failure Windows failed to install the following update with error x Security Update for Microsoft NET Framework SP and SP on Windows Server and Windows XP x KB Installation Failure Windows failed to install the following update with error x Security Update for Microsoft NET Framework SP on Windows XP Windows Server Windows Vista Windows Server x KB Installation Failure Windows failed to install the following update with error x Security Update for Microsoft NET Framework SP on Windows XP Windows Vista and Windows Server x KB Installation Failure Windows failed to install the following update with error x Security Update for NET Framework SP and SP on Windows Server and Windows XP x KB Note this are all NET related I don't know what that means I've run every Windows Update repair tool I can think of All other Windows Updates install normally I assume this is NET specific I'm hoping to avoid having to manually uninstall all the NET stuff I did it a while back and remember it was pretty tedious Any help

A:[SOLVED] Microsoft Update Fails to Install

I note these are all Net Framework Updates, did you ever install the originals which you can do from "Optional Software" at the Windows Update site?

http://www.techsupportforum.com/forums/f10/solved-microsoft-update-fails-to-install-578676.html
Relevancy 60.63%

My current java version is 8.45 (32bit), and I use windows 7 64bit enterprise.

My java update failed when I was trying to update.
The error code is 1603.
 

A:Java update fails after install bitdefender IS

Uninstall java with GeekUninstaller with it's left over, use ccleaner to clean trash & try to download new version of java & run it. R u sure bitdefender is not blocking the update?
 

https://malwaretips.com/threads/java-update-fails-after-install-bitdefender-is.48443/
Relevancy 60.2%

Hi I tried twice today to download and install the (KB951847) .NET 3.5 x86 1 Update .NET 3.5 Family and Service Pack Microsoft Framework Framework following updates Microsoft NET Framework Service Pack and NET Framework Family Update KB x it is a Microsoft .NET Framework 3.5 Service Pack 1 and .NET Framework 3.5 Family Update (KB951847) x86 large update taking approx mins to download the MB package Both times it got to the end of the download and the next I got was a message saying installation failed At first I thought it was Comodo BoClean so turned it off the second time but got the same result anyway My PC is an AMD Athlon XP GB of RAM running on XP and updated via Automatic Updates quot notify but do not install quot I Microsoft .NET Framework 3.5 Service Pack 1 and .NET Framework 3.5 Family Update (KB951847) x86 got a MSN email notification on IE RC and decided to check my Firewall connection to Microsoft Update where I was told that the mentioned updates were available and decided to install them though not IE at this time For real time protection I use Comodo CIS Comodo BoClean and SpywareBlaster I switched off BoClean the second time and set CIS to installation mode both times I cannot see anything else on my PC which could hinder the installation process In my Add Remove program list I have Microsoft NET Framework versions Hotfix Service Pack Service Pack Should I uninstall these before installing the latest version or should they all remain on my installed programs I would appreciate it if someone could offer some help here as I like to keep my PC up to date

A:Microsoft .NET Framework 3.5 Service Pack 1 and .NET Framework 3.5 Family Update (KB951847) x86

Hi .Well...let's start with the reason you have MS .NET installed on your system.What applications/drivers do you use which require any version?If you have no such applications...IMO it's not even necessary to install any version of MS .NET on a system. Doing so is a waste of time for those who don't have applications which demand MS .NET.http://forums.techarena.in/customize-xp/866859.htmLouis

http://www.bleepingcomputer.com/forums/t/199539/microsoft-net-framework-35-service-pack-1-and-net-framework-35-family-update-kb951847-x86/
Relevancy 59.77%

After the second boot on the updating screen, the one with the spinning thing. When it gets to 83%, my screen just freezes out of nowhere. I tried switching off and back on again but it reverts back to my previous version of Win10. I tried getting Microsoft Support to help but their service wasn't all that great and I wasn't too happy with them. So I'm calling on you guys to help me out.

A:Tried to install Anniversary Update but it fails by error 0xC1990. Please help me?

Welcome!
Please consider joining us here at Windows Central as a valued member.
Here's a recent WC article that may help you: Windows 10 Anniversary Update common problems and how to fix them | Windows Central

http://forums.windowscentral.com/ask-question/434591-tried-install-anniversary-update-but-fails-error-0xc1990-please-help-me.html
Relevancy 59.77%

For the past week or so Windows Automatic Update has been telling me I should install the Service Packs for NET Framework and NET Framework I tell it to go ahead it piddles install Update Packs Service fails tries but -- .NET Automatic to and diddles around for quite a while but the progress indicator never moves Finally it gives up and pops up a message box saying the items could not be installed Uh ok it just finished its attempt Here is the message Some updates could not be installed The following updates were not installed Microsoft NET Framework Service Pack KB Microsoft NET Framework Service Pack KB Sometimes it immediately again announces the availability of the updates and suggests I install them Other times it waits a while or until the next reboot FYI I am not a quot developer .NET Service Packs -- Automatic Update tries to install but fails quot but some programs that I use require NET to be installed OS WinXP with SP If you d like any other info including exports from Event Viewer let me know Oh the question How do I .NET Service Packs -- Automatic Update tries to install but fails fix this nbsp

A:.NET Service Packs -- Automatic Update tries to install but fails

Download and use the .Net Framework cleanup tool: HERE

Once done using the tool download to your hdd and install Net Framework 2 sp1: Here

and Net Framework 3 sp1: Here
 

https://forums.techguy.org/threads/net-service-packs-automatic-update-tries-to-install-but-fails.709780/
Relevancy 59.77%

Windows Update installation of Win SP updating existing version of reports the install as successful until reboot then says successful and unsuccessful in the same dialog box Error ID is Subsequent run of windows update shows SP not installed Problem repeats even after following all steps in troubleshooting including running Windows SP1 of install error update Win 80242016 7 with fails the recommended hot fix for KB troubleshooting amp turning off anti-virus Also the windows update troubleshooter identifies my system as AMD architecture even though it is Intel I K System infomation id s the CPU correctly Any suggestions System MB is ASUS P P PRO GB memory AMD Radeon HD Series video card Tech Support Guy System Info Windows update install of Win 7 SP1 fails with error 80242016 Utility version OS Version Microsoft Windows Professional bit Processor Intel Windows update install of Win 7 SP1 fails with error 80242016 R Core TM i - K CPU GHz Intel Family Model Stepping Processor Count RAM Mb Graphics Card AMD Radeon HD Series Mb Hard Drives C Total - MB Free - MB Motherboard ASUSTeK COMPUTER INC P P PRO Antivirus Norton Internet Security Updated and Enabled nbsp

A:Windows update install of Win 7 SP1 fails with error 80242016

Not the same symptoms, but check out this sticky thread to see if anything there works for you.
 

https://forums.techguy.org/threads/windows-update-install-of-win-7-sp1-fails-with-error-80242016.1050306/
Relevancy 59.77%

Yesterday I downloaded and installed latets WinXP updates Was not able to install Server SP update Found following information from their support website http support microsoft com kb When you try to install a security update for Microsoft SQL Server Service Pack Microsoft update install windows xp 2005 server sp2 fails to SQL Server is not successfully updated This issue occurs because the rollback process for the security updates incorrectly removes windows xp update server 2005 sp2 fails to install the SQL Server service accounts from the respective local SQL Server service groups CAUSE This issue occurs because the rollback process for security updates incorrectly This issue occurs because the rollback process for security updates incorrectly removes the SQL Server service accounts from the respective local SQL Server service groups windows xp update server 2005 sp2 fails to install The permissions are granted to local service groups and not to the service accounts Therefore the services cannot access the required resources and the services cannot start RESOLUTION To resolve this issue follow these steps Identify the SQL Server service To resolve this issue follow these steps Identify the SQL Server service group that is located on your computer To do this follow these steps a Click Start click Run type compmgmt msc and then press ENTER b Expand Local Users and Groups and then click Groups The SQL Server service group starts with quot SQLServer quot Identify each group and then double-click to determine the group membership If the group membership is empty go to step If the group membership is not empty check the next group In the Services Microsoft Management Console MMC snap-in determine the service account for the SQL Server services To open the Services snap-in click Start click Run type services msc and then press ENTER The names of SQL Server services start with quot SQL Server quot For example quot SQL Server MSSQLSERVER quot is a SQL Engine service for the default instance of SQL Server To determine whether this service is from SQL Server follow these steps a Right-click the service and then click Properties b Locate the program file of this service This file is shown in the Path to executable area c Right-click the file name the properties and the version The file version should begin with either quot quot or quot quot In the Computer Management MMC snap-in double-click the service group name that you located in step Determine whether the service account entry is missing in the service group If the service account entry is missing click Add type the service account name in the Enter the object name to select dialog box and then click OK Note To open the Computer Management MMC snap-in click Start click Run type compmgmt msc and then press ENTER In the Services MMC snap-in start the SQL Server services Note To open the Services snap-in click Start click Run type services msc and then press ENTER I followed these steps The problem I am having is I do not understand file version and what I need to do to correc this Thank you

http://www.bleepingcomputer.com/forums/t/264593/windows-xp-update-server-2005-sp2-fails-to-install/
Relevancy 59.77%

Help!
I have created the Senslogn Registry, deleted SoftwareDistribution, Edb.log, Catroot2, Checked all services, Checked the Registry Key "NoWindowsUpdate" I have been spending hours trying to fix 0x80240020. I need to have someone tell me what the problem could be, I am an administrator running Windows XP Pro SP2

A:Help with 0x80240020 Windows Update fails to Install Updates

Please help.

http://www.techsupportforum.com/forums/f10/help-with-0x80240020-windows-update-fails-to-install-updates-110047.html
Relevancy 59.77%

Ok I have an activated genuine copy of Vista preinstalled on a new laptop I am trying to play an old game Dungeon Siege and I have compatibility warnings when I try to run it I also get very low FPS particularly while I have chosen through the game application manual fails update install compatibility setup my NVidia Geforce M GT as the video driver I googled the issue and found that the May application compatibility update kb addresses issues with this game I read that if I have application compatibility update manual install fails automatic updates on which I do then I would have already installed the latest compatibility update I went to check the already installed updates in order to make sure it's installed and I couldn't find kb on my list Question does that mean that I don't have the latest application compatibility update could I have it installed under a different kb number Anyway to make sure I went to install it manually at http support microsoft com kb choosing option get it manually from Microsoft Download Center I run windows genuine advantage and after successful authentication I downloaded and run the update It said that the update does not apply to my system Question could that be because it's already installed Ok that's about it The following questions are not very relevant but still Question I realize this is not the right place to ask this but do you have any idea why I get so low FPS on such an old game Question Internet Explorer froze on the attempt to download the WGA tool Windows Genuine Advantage authentication I had to get it using firefox Any ideas why I just bought my laptop days ago Thank you for any answers

http://www.techsupportforum.com/forums/f217/application-compatibility-update-manual-install-fails-299243.html
Relevancy 59.77%

Hi Because I recently formatted my computer s hard drive I have had to go online and redownload all of the critical and other windows updates for my Windows XP Pro computer When I first started to download the Update Install Critical Updates to Fails Windows updates I had Windows Update Fails to Install Critical Updates Critical Updates to download Now I think I have or something like that Well these last or whatever absolutely refuse to install They are apparently downloaded though because I attempt to redownload them and they quot download quot at speeds way faster than what dialup is capable of Windows Update Fails to Install Critical Updates Well then it proceeds to install the updates However every single update fails Windows Update Fails to Install Critical Updates During the attempted installation of these updates by Windows Update my computer accesses the floppy drive for some unkown reason It does this only once or twice I believe that during these downloads I am running programs such as Norton Internet Security but I don t know why this would affect it because my other downloads completed fine with this and the rest of the programs mentioned here running I was also running Windows Messenger Yahoo Messenger I think Kazaa Lite I think and Norton Antivirus with Autoprotect enabled I have not tried downloading these files with any of these programs disabled Oh yeah I use AOL for my Internet connection but I use Microsoft Internet Explorer to do most if not all of my web browsing which does include Windows Update Please help me with this problem I am quite stumped really I have tried multiple or times to get these critical updates but each and every time the exact same thing happens Also I have deleted all of my cookies and everything in my Temporary Internet Files and tried the download again Now this really confuses me because I would think that the previously downloaded files would be deleted when I emptied the Temporary Internet Files I am thinking that the problem is that the files that I have downloaded are corrupt and they are hiding somewhere on my computer which is why every time I quot download quot these files again they quot download quot way faster than what dialup is capable of Oh yeah and just how fast these downloads go is well lets say a megabyte download completed in approximately seconds on my dialup connection which runs at bps according to Session Speed under AOL s System Information Also my version of AOL is Any help you guys can provide me will be extremely appreciated Looking forward to your replies nbsp

Relevancy 59.77%

So I had to do a System Repair thing where Windows would repair itself and removing all my apps but keep my documents, photos and music etc. So I was reinstalling every program again and also wanted to install the updates.
But I ran into 0x800f0922 error code and I couldnt install them. (I run Windows 8.1 Pro) I was trying to install Adobe Photoshop but couldnt continue cuz .NET framework 3.5 was required. But after trying to manually download + install I got the same error (0x800f0922). I've tried almost every cmd command but couldnt fix it. (im a kinda noob on it anyways)
Any help would be appreciated!

P.S. I just reinstalled Windows and tried installing the updates again, but same thing. I cannot install any update at all.

If you want, you can add me on Skype: septurae

A:Windows 8 fails to install EVERY update, error 0x800f0922

have you tried to run
Code:
chkdsk c: /f /r /x


? I had Windows Updates failing recently and ran chkdsk by booting from the Installation disk (so that the OS was not running and the HD could be unmounted). It found bad sectors and fixed them and the updates installed perfectly fine after that.

http://www.eightforums.com/windows-updates-activation/52120-windows-8-fails-install-every-update-error-0x800f0922.html