Windows Support Forum

Tower is turning on but nothing is happening

Q: Tower is turning on but nothing is happening

Well idk what to do my tower will turn on but nothing is working no screen flash not even a welcome screen just black screen

https://forums.techguy.org/threads/tower-is-turning-on-but-nothing-is-happening.1157878/
Relevancy 100%
Preferred Solution: Tower is turning on but nothing is happening

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Relevancy 63.64%

I have an Emachines W2686. For a while it would work fine, smoothly, and efficiently. But just recently it decided to REALLY act up. When I turn the tower on, it sounds as if everything runs smoothly. Hard Drive, Fans, Power unit. But it doesnt seem to be reading at all. Ive checked and changed the memory, checked the hard drive, unpowered it for a day, and yet nothing. It still turns on, but just doesnt read it. Ive even switched out monitors, checked monitor connections, and changed the cords. There are lights, for example, the smart card light is on, the CD light flickers, (no cd), and below the power button, a orange light flickers once in a while. The main power button, that usually turns green, stays off.

I know my first mistake was getting an emachines, but is there any possible way to fix this? Might it be the Motherboard?
 

A:Tower problem (Turning on)

Hi Vermiere and welcome to the TS Forum :wave:







Vermiere said:



There are lights, for example, the smart card light is on, the CD light flickers, (no cd), and below the power button, a orange light flickers once in a while. The main power button, that usually turns green, stays off.Click to expand...


Sounds very much like your Board, the other lights show that the board is receiving power Ok.

Unless you have access to a similar machine then your only choice is to take it to a PC Repair shop for them to diagnose further.

Sorry to be the bearer of bad news, if you do decide to scrap it then DONT ever buy an Emachine again, all that I have read about them is bad.

Regards
 

http://www.techspot.com/community/topics/tower-problem-turning-on.79017/
Relevancy 62.78%

I'm just wondering where to find the settings that would adjust/turn off lights that are on my tower.  Or am I stuck using a winter hat to cover it up for the rest of my life, lol.  Thanks.

A:Turning off lights on my desktop tower

Hi, From the following front, which ligh or lights are you talking about ?               Source: http://support.hp.com/us-en/document/c03135882 Worse case, a black piece of tape (such as electrical tape) could fix it/them Regards.

http://h30434.www3.hp.com/t5/Desktop-Operating-Systems-and-Recovery/Turning-off-lights-on-my-desktop-tower/td-p/5804396
Relevancy 50.31%

hi, I am going to upgrade my graphic card to ATI 5770 so I need a new power supply which has power about 550--600 watt. But the most frustrating problem is that I failed to find a proper power supply with the correct dimension.
I have an HP pavilion e9300 which uses a very wired power supply tower-150mm(W) 86(H) 140(D). But so far all the PSUs I found is the standard size --150mm(W) 86(H) 150(D) which cannot fit in my setup.

So could any PC God give me some suggestion, please??
Is any PSU with the size of my tower or can I just simply install a bigger PSU which can still successfully power up the comptuer?

Thx in adance.
 

A:Power supply bigger than the tower - frustrated by HP PSU tower

If the power supply will physically fit your case, it should work fine with your computer. Will the extra 10mm interfere internally with anything inside the PC?
 

http://www.techspot.com/community/topics/power-supply-bigger-than-the-tower-frustrated-by-hp-psu-tower.148841/
Relevancy 49.45%

I need to retrieve some old info from my old tower. Is it possible to hook the old tower to the new one and use it as a big memory bank? And if so, how do I do it?
 

A:Hooking old tower to new tower to retrieve old programs

This TCP/IP Home Networking and File Sharing Tutorial should get you started.
 

https://forums.techguy.org/threads/hooking-old-tower-to-new-tower-to-retrieve-old-programs.613660/
Relevancy 47.73%

Forgot to ask this in my last thread. Is there any difference between a mid-tower ATX case and a full-tower other than height? Thanks.
 

Relevancy 42.14%

Here is the issue, when my computer goes to sleep after it's on for a while when I move the mouse to get the screen back up it shows the backround no icons or anything to click.
Same if I turn it off and turn it back on. I have to turn it off and on many times then go to safe mode and shut down then turn it on again for it to work. Just now I had to turn it on/off 4 times for it to show the icons and task bar. Usually it is left blank with nothing to click having no choice but to turn it off.
Norton says no viruses.
My computer is HP with windows 7. I bought it in 2011.
This problem has been happening for a long time. Please help.

A:When turning off computer & turning it back on again screen is blank

Hello squirrels and welcome to Seven Forums.

I think I'd start out by trying to do a startup repair. It's been suggested that the startup repair be done 3 times (regardless of what the notifications say) and the computer rebooted after each repair.

Startup Repair

If this doesn't fix the problem one of the Forum experts has prepared these troubleshooting guides with some additional suggestions.

Troubleshooting Windows 7 Failure to Boot

Troubleshooting Steps for Windows 7

http://www.sevenforums.com/general-discussion/271551-when-turning-off-computer-turning-back-again-screen-blank.html
Relevancy 42.14%

Hi there, i have some issues with my monitor (awhhh).

It's working fine like 10-20-30 minutes and then it's turning off (for no reason) while the cumputer is running and the flash/button goes pink. I don't know what's this colour stands for. Blue is when the monitor is active, yellow is when the monitor is turn to sleep and when i shut down my computer, but PINK? What's that, anyone?

The monitor is turning OFF, not in a sleep mode or something.
I must remove the cable and push back in every 20 minutes. That's wrong.

Maybe it's the cabel, maybe something with drivers and stuff...i don't know.

HELP!



please anyone....it's my moms monitor and she's gonna kill me, i blew it up.

Thanks.

Flux333
 

A:Monitor is turning off and the button in the right corner is turning pink

It would be nice to know the brand and model of the monitor
 

http://www.techspot.com/community/topics/monitor-is-turning-off-and-the-button-in-the-right-corner-is-turning-pink.151054/
Relevancy 42.14%

My other half and son were using the computer yesterday, and then left it on to do some other things, upon returning to the laptop noticed that the power button was solid blue (should be flashing orange when in standby mode), with nothing on the screen, moved the mouse with nothing happening as well as CTRL+ALT+DELETE.

Powered computer down by holding the on/off button for 5 seconds, restarted but noticed that I could hear the DVD drive power up but that is where it stops/hangs, nothing comes on the screen. Have done this numerous times, as well as removing the battery and starting with just mains power on?


Can anyone help with what might be going on ??



JeffM

A:Re: Satellite A100 - Won't reboot after turning off and turning back on ?

Hi,

Can you enter Bios (f2 on startup) to check if the HDD recognized. Also, try to reinstall Windows with a recovery disk or Windows copy disk.

https://forum.toshiba.eu/showthread.php?54535-Re-Satellite-A100-Won-t-reboot-after-turning-off-and-turning-back-on
Relevancy 39.99%

Long story short My computer suddenly shut off And when i pressed the power button it would attempt to turn on then just fail and shut down completely no signal to anything only fans I cleaned out the pc and cleaned out the power supply reassembled and it help turning Need on. off/not ASAP. Computer turning turned on as per normal i used it for Need help ASAP. Computer turning off/not turning on. about minutes set it to sleep for an hour or two turned it on used Need help ASAP. Computer turning off/not turning on. it for about an hour and a half then it suddenly turned off again When this happens it either powers on for seconds then powers down or it powers up all fans and mouse led but no signal to keyboard or screen whatsoever i assumed it was the power supply so i purchased a new one today and installed it It turned on first try i assumed it was fixed i used it set it to sleep as per normal and went to turn it on again and it turned on all fans but once again no power to anything else just fans it seems I tried everything I have two sticks of ram so i switched them used them singularly tried running without fans Oddly it didn't beep even without video card or ram but nothing made a difference I just borrowed a single gb stick of ram from a friend and it successfully powered on and I am using it normally But i just can't imagine the problem was just the ram and i expect it to power off again soon Can anyone help

http://www.pchelpforum.com/pc-hardware/127014-need-help-asap-computer-turning-off-not-turning.html
Relevancy 36.98%

Just few hours ago I was listening to songs on Napster. Then I played some online games. I had to reboot at one point since it was going slow on me.

For some reasons unknown, my computer turns off and tried to boot itself, but kept turning off and booted itself. Somehow it did that in a loop. I tried to wipe up some dirt from inside(it may not be completely wiped up). I even tried to rearrange the cables and such. Now, if I press the power button, it only shows the power indicator, but it won't boot. I'm just puttoping it to rest right now hoping that it would back up tomorrow when I turn it on.

I have Velocity Micro with Windows XP SP3 (update progression). Motherboard: ASUS. I posted this using my laptop. I appreciate any help or input.

Thanks,
G.
 

Relevancy 36.98%

Whenever i turn the laptop on, in just 2 seconds it turns off by itself.
 

A:Help on laptop keeps turning off after turning it on?

Reseat Ram and HardDrive
Disconnect any externals especially USB
Test without the battery plugged in
Check for any build up of dust near where the fan is
 

http://www.techspot.com/community/topics/help-on-laptop-keeps-turning-off-after-turning-it-on.116989/
Relevancy 36.98%

Let me clarify My brother brought his computer over for me to recable it Simple process right Not so much Before I get into details let me give you specs Keep in mind since I did not build the system I do not have all the information I usually would Windows Vista GB of RAM unknown brand on, turning turning on then not Computer Abit motherboard unknown serial number AMD athlon GHZ processor GB harddrives In raid configuration to look like hard drives GB each Antec watt power supply Nvidia Geforce Computer turning on, then not turning on GT Video card Okay so when I recabled everything and powered the system on it would not boot at all Everything was on and running but the bios was not doing anything and everything was at a standstill Not knowing if the raid configuation and the motherboard had anything to do with it I started swtiching the sata connections into Computer turning on, then not turning on different configurations based on what I think the individual would have done In doing this I accidentally pulled a jumper from the motherboard Setting it aside and not thinking it was important I plugged everything back in and attempted to power on the computer This is where it gets interesting Instead of even powering on like it did last time it powered up for MAYBE one second before shutting off Any other attempts to power it on were futile and resulted in nothing After this I replaced the jumper where it was supposed to go and powered on the system again The same thing happened I want to think the power supply is toast but I would like some ideas advice on what others may think it will be before I go switching parts out and or buying new parts for my brothers machine Thankfully if I have to buy new parts they should be inexpensive because the processor is fairly old Any help is appreciated Thank you nbsp

A:Computer turning on, then not turning on

Make sure that you have the 24-pin main power connector and the 4-pin power connector both connected to the motherboard.
 

https://forums.techguy.org/threads/computer-turning-on-then-not-turning-on.803239/
Relevancy 35.26%

Alright, I have this game named Sim Tower, which is a tad bit slow (but shouldnt be). I can manage to install it fine, and even play it off the CD quite well if I wanted to. Although when I start the game, it automatically goes into fast mode (which means time is fast forwarded until there is activity with the people in the game). It hasnt got too much to do with fast mode, but this is when it effects the game speed a lot (mainly the cursor though). I take fast mode off, and then the cursor drags all over the screen, making it nearly impossible to play. At most last time I got to put in some office floors, but Alt F4 Seemed like the best option after that. I have tried running it in compatability mode, and even with this kinda of patch. Any suggestions on how to stop my cursor from slowing down?
 

https://forums.techguy.org/threads/sim-tower.450700/
Relevancy 35.26%

hey all I have recently bought a gb seagate sata HD's in One tower Two harddrive to go with my current gb sata harddrive and i think i ve made a right mess of things I installed it fine and everything computer read Two HD's in One tower that is was there etc only i tried to move my files from one hard to another and im sure as you can imagine its all gone pete tong What i was trying to do or aiming to achieve to have one hard drive purely for the OS and the program files that i use and the other for all other filetypes such as documents music and videos etc I have managed to recover some of my data but all of my music a good gbs worth and gbs worth in guitar drum training teaching movies etc etc Is what i m attempting to do possible on windows xp if so how do i do it safely so i don t screw anything else up LOL Many thanks in advance Mikeyprs nbsp

Relevancy 35.26%

Hi

I need some info from my old HD. This 'puter was running WIN ME.
I have memory problems that will not allow this to boot or even POST

http://forums.techguy.org/showthread.php?p=2674998#post2674998
My new 'puter is runing XP Home.

I would like to put the old HD into my new machine.
Is this asking for big trouble or should this be ok?

thanks
bm
 

A:old HD new tower

here's the thing...it depends. if you installed xp on fat32 then yes you can install your old ME HD as a slave and be able to read it...however if you installed xp in NTFS then you'r just plain outta luck. you can't read fat32 with ntfs
 

https://forums.techguy.org/threads/old-hd-new-tower.370584/
Relevancy 35.26%

hi guys I am trying to connect my pc tower to tv using s video cable.I have A VIDEO CARD raddeon x300 with s video dvi and vga,TOWER IS A SR5010NX COMPAQ PRESARIO..I need help on connecting this tower to an hitachi53 inch projection screen tv.I get a picture black and white. moving screen.. I am using french version of windows vista basic for some reason when i got the pc formated they added vista and in french.can someone please help.THANKS
By the way I LIKE TO THANK THIS FORUM AND THE PEOPLE WHO HELPED ME WITH THE ISSUE I HAD WITH DVD DRIVE. THANKS GUYS

http://www.techsupportforum.com/forums/f217/pc-tower-to-pc-471966.html
Relevancy 35.26%

Im looking to buy a tower to replace my old one. Can anyone give me a link for the best tower with os already on it for around 200-300$.I know that not much but im a broke dude I would like to find at least a 2ghz .
 

A:What tower should i buy?

Dell outlet would be a good place to start. Personally, I would save up a little more and wait for a good deal at Dell.

This is an example of what they have:

System Price : $269.00

Operating System Genuine Windows XP Home
Memory 512 MB DDR NON-ECC SDRAM 400MHz (2 DIMMs)
Hard Disk Drive 40 GB EIDE Hard Drive (7200 RPM)
Modem 56Kbps Data/Fax Modem
Base Dimension 3000 Desktop: Intel Pentium 4 Processor (2.80GHz, 533 FSB)
Media Bay 48X Max Variable CD ROM Drive
 

http://www.techspot.com/community/topics/what-tower-should-i-buy.54410/
Relevancy 35.26%

Tech Support Guy System SSD New for tower? old Info Utility version OS Version Microsoft Windows XP Professional Service Pack bit Processor Intel R Core TM CPU GHz x Family Model Stepping Processor Count RAM Mb Graphics Card NVIDIA GeForce Mb Hard Drives C Total - MB Free - MB D Total - MB Free - MB E Total New SSD for old tower? - MB Free - MB F Total - MB Free - New SSD for old tower? MB G Total - MB Free - MB H Total - MB Free - MB J Total - MB Free - MB Motherboard Intel Corporation D GCF Antivirus avast Antivirus Updated Yes On-Demand Scanner EnabledClick to expand As shown above I have an older tower that I have modestly upgraded with a SATA DVD drive more RAM and a better video card I was wondering if my system is compatible to a SSD drive and if it is how much would it improve performance Also would I be able to clone my current SATA drive to it nbsp

A:New SSD for old tower?

Well there are three issues I see;
1 Your mb only has sata 2 ports and that will limit or throttle the speed of a modern ssd. It will still be a HUGE improvement over a mech hard disk however you will be somewhat limited.
2 Next issue is that xp [your os] does not support TRIM or wear leveling for the ssd. This causes a degrading of performance over time. Sometimes the drive mfg has a utility that will do basically the same thing. Another option is to make an image of the ssd and store the image on a second hd, external, etc. Once the image is made, boot with parted magic linux and secure erase the ssd. Once the ssd is secure erased, restore the image. This will also restore the ssd drive's speed.
3 XP does not apply the correct partition offset for a ssd. This can be edited manually using linux OR you can create the partitions with a win7/win8 boot disk then install xp.

Other than the above issues, you can install a ssd drive and you will see a significant improvement in performance however not as much as with a modern mb supporting sata3.
 

https://forums.techguy.org/threads/new-ssd-for-old-tower.1154425/
Relevancy 35.26%

I had to buy a new computer A couple months ago I was using an Emachine desktop computer I know Emachines aren t anywhere near being quot the quot but when you come from Tower Old a not so financially stable family you are not greedy Anyway the computer worked for the longest time and I had a separate tower as well The separate tower had Adobe Photoshop on it and that is a program I love to play around in and so I would just take the chord from the back of my Emachines tower that led to the monitor and I would plug it into the older tower without powering down or anything Obviously my first mistake but I didnt knw that at the time So I kept doing this and then one day I went to plug the chord back from the old tower to the Emachines tower and nothing happened It was like the Emachines tower was sending no signal to the monitor anymore I tried different monitors and none of them worked there s something wrong with the tower now Maybe the video card I am computer illiterate to the core so alot of abbreviations tend to stump me If someone could help I would highly appreciate it Being a recent graduate from high school I have pictures on that Emachine tower that I do not want to part with nbsp

Relevancy 35.26%

So I recently got a used tower from a buddy of mine for free he told me that there was a virus and needed to be cleaned I thought i could install a windows operating system since With Need Serious Help Tower my this was a windows vista and fix Need Serious Help With my Tower it however when i try to run the installation i get a yellow screen and the computer either freezes or crashes before the start up I was thinking of getting a new hard drive for it I also tried running it on safe mode and tried to get to command prompt to type in rstriu exe to be able to restore it but it seems to keep crashing before i can get past the starting screen its an hp pavilion media center m f pc with an amd athlon x dual core processor mb system memory gb hard drive an nvidia gefore se graphics and running windows vista home premium I was thinking of keeping the tower and buying a new processor hard drive and graphic card if needed but i feel like if i change the hard drive it will help i dont know what to do at this point can anybody help nbsp

Relevancy 35.26%

Hello there, the tower on my Windows Xp will not come on. It's plugged in, I swear, the monitor will come on just not the tower. Please give me some good advice.

Thank you much,
Elizabeth
 

Relevancy 35.26%

hi i have a Philips Freevent ls1600 it keeps locking up and in the tower display there is a symbol with a keyboard and two z above it and a time starting at 1200 i have to wait till the time goes to about 0100 then i can log on also when i shut the computer down the power is still going to the tower with the above symbol still showing.

http://www.techsupportforum.com/forums/f217/locked-tower-621449.html
Relevancy 35.26%

hI I am new to this site not sure if I have come to the right place or not??
I know absolutely nothing about computers.
I hooked up a used tower it worked great for 15 mins then comp. froze. tried to reboot and orange light came on moniter stayed black..tower is not making any beeps at all..Can some one help???
 

A:Tower Not Working

Do you happen to have any of the computer's specs you can post?
Problems like this could be a number of things, but my guess is either dead PSU or motherboard.

Let's start here: open up the case, and see if there are any led lights on the motherboard that are lit up, even when the power is off, as long as it is plugged in you should get something.
 

http://www.techspot.com/community/topics/tower-not-working.38498/
Relevancy 35.26%

will a p2b board fit in a mid-tower?
i have to replace my tower (i believe is a full tower, the cage is nose to nose with the board however)
and need to know if i can use a mid tower?
 

A:will a p2b board fit in a mid-tower?

p2b board?? Motherboards are described by form form factor. IE... AT, ATX, Baby At, Micro At. I am not sure what p2b means. Do you know what brand and model the motherboard is?

Let us know
 

https://forums.techguy.org/threads/will-a-p2b-board-fit-in-a-mid-tower.114622/
Relevancy 35.26%

Okay I m totally new to this site as in I just registered moments ago I m not entirely certain if this is Tower beeping? the right forum for this if it s not please feel free to direct me to the correct forum for it I am currently on my boyfriend Tower beeping? s computer which is right beside mine About an hour ago my tower started beeping continuously I had no idea why and just figured I should shut it down to be safe as I was on my way to the store at the Tower beeping? time When I returned from the store my computer would not boot back up It gets to the windows screen but never goes past there Also the tower no longer beeps and hasn t since I tried rebooting it earlier I googled for some answers and discovered that there is such a thing as beep codes Which would be great and probably help me solve the problem or at least know what the hell the problem is if I had known about them sooner and was bright enough to count the beeps So now I am totally at a loss does anyone know what I could do to try and figure out what is wrong with it If all else fails I ll have to take it to a tech I guess which I really don t want to do Any feedback would be nice thanks nbsp

A:Tower beeping?

If it beeped, then it is almost certainly a hardware thing. This could be due to loose memory (this happened to me before), a loose PCI/AGP card, or a more serious hardware (motherboard) failure. I'd make sure your connections are nice and tight. Also watch if the fans are working.
 

http://www.techspot.com/community/topics/tower-beeping.16835/
Relevancy 35.26%

i have no idea whats causing it but it started a few days ago while i was playing lotro but when i would log out of the game it would no longer do it now it is doing it all the time it is coming from the tower itself it is the beep u hear when u first turn the computer on but its constant and other than it the computer is running fine what can i do to stop this? ive ran a spyware scan a virus scan even registry repair and nothing is correcting it ty to anyone that can help me solve this problem

A:My Tower Keeps Beeping

What is the Operating system on this PC,Xp?
This is more likely a hardware issue what is the make and model of the PC?

http://www.bleepingcomputer.com/forums/t/147424/my-tower-keeps-beeping/
Relevancy 35.26%

I m posting this in here because this forum has the most people viewing it right now and no one replied to it in the general hardware forum I originally posted it on I am currently on my boyfriend s computer which is right beside mine About an hour ago my tower started beeping continuously I had no idea why and just figured I should shut it down to be safe as I was on my way to the store at the time When I returned from the store my computer would not boot back up It gets to the windows screen but never goes past there Also the tower no longer beeps and hasn t since I tried rebooting it earlier I googled for some answers and discovered that there is such a thing as beep codes Which would be great and probably help me solve the problem or at least know what the hell the problem is if I had known about them sooner and was bright enough to count the beeps So now I am totally at a loss does anyone know what I could do to try and figure out what is wrong with it If all else fails I ll have to take it to a tech I guess which I really don t want to do Any feedback would be nice thanks nbsp

A:Tower beeping?

Design ,It would be helpful to fill in your profile on your Hardware .In this case the Motherboard ,brand and model #.
You will get a lot more help that way.
Beep codes differ and are specific to the company that wrote the bios. Also they will have a different pattern for each type of error.this is a repeating pattern of long and/or short beeps.
However these occur at initial boot time .
Since your computer has re-booted up to Windows almost ,you should look in your event viewer for errors.
Try to boot windows into Safe mode.
 

http://www.techspot.com/community/topics/tower-beeping.16836/
Relevancy 35.26%

I'm looking to upgrade my dad's computer setup. He has a Gateway with Windows 98 -- all hardware from around '97 or '98. It needs upgraded so I wanted to get something like this new tower, but he wants to keep the same monitor. Will a 10+ year old monitor work with a modern tower?
 

A:Getting a new tower for old monitor

it will definitely work , it will just look like crap.. its totally worth getting an LCD if what you currently have is an older CRT monitor
 

https://forums.techguy.org/threads/getting-a-new-tower-for-old-monitor.979855/
Relevancy 35.26%

I have a Xigamatek CPC-T45UB-U01 Asgard Chassis tower where the PSU is a top mount.

https://www.amazon.co.uk/Xigmatek-CP...0680271&sr=8-3

Does it make a big difference when the PSU is mounted at the top or bottom?.

I really need to know as i have just purchased a new mb, i was also thinking of purchasing a case with a bottom mount for a psu.

I need to hear some info before i make my mind up.

As always, i appreciated the advice.

A:PC tower PSU top or bottom?

I can always mod the the case, adding a new hole on the top in the centre for a fan.

http://www.sevenforums.com/hardware-devices/195948-pc-tower-psu-top-bottom.html
Relevancy 35.26%

Has anyone ever tried 2PSU's in one tower? I ask because I'd like just one to run my video card <ATI X800GTO> so I'd like to know if that's worthwhile since I have a few laying around that are not all that great. I know it's probably a stupid question, go easy on me.... ;>)
 

A:2 PSUs in one tower?

I've never heard of that being done. I don't know where you would get the room. I would recommend that you get a new Psu with greater wattage.
 

http://www.techspot.com/community/topics/2-psus-in-one-tower.122693/
Relevancy 35.26%

Hey I have recently ran into a problem with my computer a few days ago while moving furniture my couch fell and PC hit tower was after BSOD hit into my PC case no damage was done to the case but BSOD after PC tower was hit I have been having a few problems since The PC was running as it was hit the PC remained on and I was able to use it normally I booted my PC up the next morning and was told that windows was unable to load correctly and to either launch into repair mode or start normally I tried repair mode and it finished but after rebooting again I received the message again Occasionally while trying to boot up I would see a very quick flash of a Blue Screen but it was not in my mini dump folder After hearing that the hit to my PC may have caused damage to my SSD i decided to get it checked out after having the SSD checked out at a PC Repair Shop I was told that the SSD was fine but he believed that the cause of the BSOD was a half installed Windows update My PC was fine again for about a day but then I got another BSOD this morning luckily this one has appeared in the minidump folder so hopefully someone will be able to shed a little light on what may be causing this So far I have not received the quot Windows was unable start quot message since getting my PC looked at by the Repair Shop I have attached the zip from SF Diagnostic Tool Thanks in advanced prizna

A:BSOD after PC tower was hit

SSD is take no damage from the vibrations like HDD does. However the driver causing the BSOD is the Intel Rapid Storage Technology. You might wanna remove that.

http://www.sevenforums.com/bsod-help-support/353576-bsod-after-pc-tower-hit.html
Relevancy 35.26%

hello. My sister pulled the power cable from the back of the tower while her computer was on, now when i turn it on, the fan is abnormally loud. No image to the monitor what-so-ever. is there a fix to this? thank you =]
 

A:Odd tower issue

Sounds like some stuff got fried. It could be your Mobo. Isolating your hardware might be a good idea in figuring out what got fried. Do you have another graphics that you could swap for the one presently installed?
 

http://www.techspot.com/community/topics/odd-tower-issue.112025/
Relevancy 35.26%

Compaq Presario SR5010NX Desktop
Celeron D processor 360
Windows 7 Home Premium
1 GB RAM
120 GB HDD
Intel graphics media accelerator
DVD/CD w/Lightscribe
=================================
I recently performed a clean install of Win7 HP on this older tower and it's been running very well. Trouble is, it sounds like a vacuum cleaner on its last legs...very loud noises. I'm not qualified to identify a correlation between the upgrade and the outrageously noisy internals, but I've been given suggestions about poor heatsink mounting a la dried up thermal compound, or bad fans' bearings, or hard drive, etc.

I took a snapshot of the inside of the chassis with the side panel removed for uploading of the jpeg here, because I'm not savvy enough to understand where the heatsink is I'm happy to replace fans and even the heatsink if someone will please just tell me how to find it

Thank you.

sbuxman

A:Noisy tower

Is it definitely louder than before the clean install, with no new components? That is, is this a new development?

The heatsink refers to the CPU cooler in the lower right portion of that picture. If the heatsink were mounted poorly, it might cause the CPU fan to speed up in an attempt to lower temperatures. It wouldn't be my first guess for the source of noise, but that fan may be working very hard or going bad.

Check your temperatures and fan speeds with a tool such as HWInfo.

Fans spinning above 1000 rpm are typically audible--some more than others.
Get your ear in there and listen. You can stop case fans or even the CPU fan for a second or two to see if the noise disappears---that's one way to determine if it is a fan issue.

Listen near the power supply, probably upper left in that pic. It has a fan also.

Does the noise sound like a wooshing? That's most likely fans or air turbulence.

Whines can be drives, power supply coils, or even motherboards.

Hard drives are probably lower left in your pic.

Cases can be noisy in general, some more than others. You might have a vibration component to the noise from the front bezel rattling a bit--or just from poor design where noise leaks out through gaps or vents.

It's not easy to quiet a noisy case. The best way to get a quiet PC is to assemble it from quiet components, rather than trying to quiet it after the fact.

Some fans are noisier than others, even if working properly. You'd have to replace them with known quiet fans--preferably of the largest diameter that will fit the mount.

http://www.sevenforums.com/hardware-devices/256810-noisy-tower.html
Relevancy 35.26%

hi it is my first time hear and oi hope some one can help me

i have a new motherboard and tower and i would like to keep my old hard drive and put it in the new one as the primery as ther is a lot of important info can some tell me how to do this THANKS
 

A:ne mobo and tower, would like to use old hdd.

davet said:



i have a new motherboard and tower and i would like to keep my old hard drive and put it in the new one as the primery as ther is a lot of important info can some tell me how to do this THANKSClick to expand...

Hi and welcome :wave:
Plugging in the HDD is easy, only has one connector for the data and a molex for the power. Jumper settings are on the info sticker ontop your HDD. The most you'll run into is windows xp not booting properly, in which a windows Repair *Not a Reinstall/Format* will fix.

If you have any more questions, please start a new thread in the HDD and Network section of the forum with an appropriate title.

N3051M
 

http://www.techspot.com/community/topics/ne-mobo-and-tower-would-like-to-use-old-hdd.61364/
Relevancy 35.26%

im going to update my stock case fans with a couple Vantec torndoes. the only issue i am afraid of is actually causing a vacuum within the case as to where the air can actually be sucked back through my power unit causing it to over heat.... is this possible?

A:new tower fans

Originally Posted by narcopletic pc


im going to update my stock case fans with a couple Vantec torndoes. the only issue i am afraid of is actually causing a vacuum within the case as to where the air can actually be sucked back through my power unit causing it to over heat.... is this possible?



it is happening, per the new PC case layouts were seeing with the PSU on the floor of the case sucking straight from the outside & venting it back out the rear..

but the old case design has worked perfectly for years with the PSU at the top, thats why a 140mm fan was added to newer PSUs to help remove hot air from the case

but its not really an issue, your PSU will never die from the extra heat of your components...

it is on the other hand possible to create a ''dead spot'' where the PSU fan cannot extract due to chassis fan configs, but each case is different so its something you would have to test.

move your chassis fans to different locations each time holding your hand by the PSU exhaust, see if the flow changes at all. (i doubt it will)

i always try to put a ''positive'' pressure inside the case (more intake than exhaust), so air cant be sucked in through cracks & drive bays, thus lowering dust coverage

but a PSU can get very hot so i wouldnt worry too much....

SK

http://www.vistax64.com/general-discussion/193380-new-tower-fans.html
Relevancy 35.26%

Several months ago I bought an Elite Cooler Master Tower It was in Tower Air Flow for a build for a file server I liked it because it had a section on the front for quot hard drives I figured I could take advantage of that Plus it was cheap Also I liked other Cooler Master Products and I figured that they knew how to deal with air flow I ve messed with stacking hard drives in the slots to see how well air flow would work I have since wondered whether or not I made the right decision Any Air Flow in Tower thought about air flow in all the hard drive slots is welcome Here are some pictures http www coolermaster-usa com product php product id http www newegg com Product Product aspx Item N E To a lesser extend I also bought a module for converting the quot bay into at least quot hard drives There is air flow around the hard drives albeit the air flow space is quot http www coolermaster-usa com product php product id http www newegg com Product Product aspx Item N E amp Tpk cooler master module nbsp

A:Air Flow in Tower

It's not specific to just that Cooler Master case. In any situation where you stack numerous drives, air flow is impeded as there typically isn't much space between the drives. You would overcome the issue by using fans to suck more air through the case.

As for the module, it converts 3 (not the - inferring one) 5.25" bays. I prefer the Icy Dock model as the drives are all accessible from the outside. http://www.newegg.com/Product/Product.aspx?Item=N82E16817994028
 

https://forums.techguy.org/threads/air-flow-in-tower.1018162/
Relevancy 35.26%

well- at least i think it is. lately there has been a wierd burning smell coming from my tower. i've been shutting it down when i smell it, but i was wondering if anyone had any idea what it is and what i can do about it. i think the fan may be broken. is this the beginning of the end for my little puter?
 

Relevancy 35.26%

Today I turned on my computer, just like everyday. But after awhile, it started to beep. A series of 4 different pitched beeps with a pause after all 4 have sounded. It keeps coming back and never stops. Whats going on?
Follow Ups:
 

A:Beeping from my Tower

if it's while you're in Windows, that means the internal temperature settings are to high and it's telling you to shut down before you fry your processor or more. If it's during the RAM count, then it's a different problem which i'll go more in-depth into later if you tell us whether it's secnario 1 or 2
 

https://forums.techguy.org/threads/beeping-from-my-tower.47042/
Relevancy 35.26%

Hi everyone, newbie here :) My question: I recently purchased a refurbished Dell 780 Optiplex DT, small form pc. I would like to put in in a tower case, that way I can use a standard dvd drive, and and perhaps a better power supply (I did some research and found a wiring schematic showing how to convert a standard supply to work with these little fellers :) but not sure what type case to use..any suggestions? 

http://en.community.dell.com/support-forums/desktop/f/3514/t/19993622
Relevancy 35.26%

I almost had my tower catch fire because the power supply fan stopped. The cputhermometer software wouldn?t shut it down because the cpu operates at only 40c but the mother board and the other wiring was melting. By the time the cpu would be effected by the ambient temperature it would be too late. I am trying to find a method of sensing an overheating problem which would be an independent stand alone system. Even though my system has fans everywhere and is dust free I still want it to be safe from setting its self on fire when I?m away.
Would someone please know of a solution.

A:tower melt down

This is some interesting reading
It's a pdf document
www.freeweb.hu/t-t/elokep/pic/download/tb067a.pdf

http://www.bleepingcomputer.com/forums/t/230524/tower-melt-down/
Relevancy 35.26%

Im working on Compaq something tower. Doing a favor for the mother in law. This tower is her co-workers and asked if I could look at it.

At first glance, all the internal cables and wired are firmly attached. So I direct my attention to the power source, It is equipped with a green led light (to tell its getting power I assume). This little green light is not lighting up when plugged in. Its doing nothing. Power source model is a Bestec ATX-250-12z

Any ideas or suggestions?

A:Tower not getting power?

Hi garaboldi,

This might sound daft, but I've done it before. Have you made sure that you have plugged it in and switched on at the wall socket? Is there power to the wall socket? Try with another appliance that you know is working. Does the fuse need changing in the plug, and is the wiring secure?

http://www.vistax64.com/general-discussion/211783-tower-not-getting-power.html
Relevancy 35.26%

I want to know if i can add another tower to my current computer, i just want to add a tower and no monitor. In this tower i want to just put a CD RW drive and whatever it takes to run that drive (if anything is needed). also i might like to put another hard drive and other drives like a DVD ROM. if possible i might like to add more RAM (if i can use this for the computer that has the monitor attached to it.)

can i do any of this?

thanks for your help.
 

Relevancy 35.26%

Hello Everyone tower will turn off not The problem that I am having with my system is that every time I click the shutdown icon and when the message appears tower will not turn off telling me it is now safe to turn off my computer I press the power button nothing happens the message on my screen is still on press serveral times even hold the power button in for couple of minutes and still it will not turn off I went into BIOS and there is nothing in it to cofigure the power mode or the shutdown I am at loss here I check for virus spyware and tower will not turn off every thing else that I can thing of using professional mechanic and another thing the lights for the power status and hard drive are not on the reset button does not even work when I press it also the sleep button my motherboard is a GFXcel PC in which i will like to disassemble and clean but i do not have a manual for it and that i will be confuse and lost with the power connections when it comes to reconnection Any suggestions

A:tower will not turn off

Check here: PC Chips
Just search for the board

Or here
There is a download at the bottom of the page for the manual.

http://www.techsupportforum.com/forums/f10/tower-will-not-turn-off-99353.html
Relevancy 35.26%

My wife has over 5000 itune songs on the computer. We have decent litte logitec speakers but they still dont sound all that great. If I bought a pair of tower stereo speaker is there anyway to hook them to the PC?

A:tower speakers

If I bought a pair of tower stereo speaker is there anyway to hook them to the PC?
 

There is a possibility but there is a need to know what kind of in/output jack on the logitech speakers are being used. Usually the 3.5mm stereo plug jack type can be soldered on the speaker wires and then connect on the logitech 3.5 jacks audio out. The in audio jack then would be connected to your PCs audio jack. There are also dual 3.5 mm male/female to RCA audio adapter http://www.amazon.com/3-5mm-Stereo-splitter-Adapter-Female/dp/B004D0LTL2 if you prefer the RCA cable. All audio outputs should pass the amplified speakers going to the PC. 

http://www.bleepingcomputer.com/forums/t/511374/tower-speakers/
Relevancy 35.26%

A friend recently gave me an old tower of his with Windows XP installed. He did not give me a monitor. I was hoping I could use a VGA monitor cable and be able to plug that cable into my laptop and the tower but I am having difficulties. There is no place for me to "physically" boot up to that tower. Do I need to buy another/different cable to do something like this?

A:Tower with no Monitor

  
Quote: Originally Posted by codyw


A friend recently gave me an old tower of his with Windows XP installed. He did not give me a monitor. I was hoping I could use a VGA monitor cable and be able to plug that cable into my laptop and the tower but I am having difficulties. There is no place for me to "physically" boot up to that tower. Do I need to buy another/different cable to do something like this?


Don't even think about using the laptop screen as the desktop monitor unless you know exactly what you are doing, how the desktop was configured, etc. What you are proposing is having the XP desktop set up like a headless server, connecting the desktop and laptop via a crossover cable (or connecting to a network) then "running" the desktop using remote access from the laptop. Not a simple undertaking.

Buy a cheap used monitor and keyboard for the desktop - it's cheaper than replacing a fried laptop!

Regards,
GEWB

http://www.sevenforums.com/hardware-devices/175910-tower-no-monitor.html
Relevancy 35.26%

Hey guys, I'm in the process of building another computer. It's been awhile so, I propose the question: If you could buy any ATX Tower Case which one would it be and why? My price range is 65.00-150.00 and or there any sites a could visit to compare and contrast the cases? Thanks!
 

Relevancy 35.26%

Hello I am thinking of building myself a new tower a Tower Making new for the first time ever I am not sure if all the things I have chosen for my desktop build are everything I need for it to run or if all the components I have chosen will work together compatible or not Making a new Tower Please check my specs components Newegg com - AMD Phenom II X GHz x KB L Cache Socket AM W Quad-Core Desktop Processor HDX WFGMBOX Newegg com - Antec EarthWatts Green EA- D Green W Continuous power ATX V v EPS V Making a new Tower PLUS BRONZE Certified Active PFC Power Supply Newegg com - Antec Three Hundred Black Steel ATX Mid Tower Computer Case Newegg com - ASUS M A TD-V EVO USB AM AMD G HDMI SATA Gb s USB ATX AMD Motherboard Newegg com - Asus VW T-P Black quot Making a new Tower ms LED BackLight LCD Monitor w Speakers Newegg com - Crucial Ballistix sport GB x GB -Pin DDR SDRAM DDR Desktop Memory Model BL KIT BA A Newegg com - GIGABYTE GV-N D - GI GeForce GT Fermi GB -bit DDR PCI Express x HDCP Ready Video Card Newegg com - Seagate Barracuda ST AS GB RPM MB Cache SATA Gb s quot Internal Hard Drive -Bare Drive Newegg com - ZALMAN A-LED mm Ball CPU Cooler Thank You Slasher

A:Making a new Tower

If you are not going to overclock, you shouldn't need Ballistix RAM, but Crucial is a good brand.

That's a good basic case.

Many here would try to steer you away from Seagate hard drives toward WD or Samsung, but you can obviously have good or bad luck with any of them.

http://www.sevenforums.com/hardware-devices/157279-making-new-tower.html
Relevancy 35.26%

Hmm, hey guys, I'm looking for a new case to replace my current raggidy, ugly, overall horrible looking case.

Want to help me in this adventure of mines?

Here's what I would like:
-Black case
-Mid Tower
-Comes with 1 or 2 120mm fans
-Power supply is optional
-Something durable yet not soo heavy that I cant even pick up.

thanks
 

Relevancy 35.26%

Hi for the past few days I have been hearing sounds coming from my tower. I just had it cleaned about 2 months ago, so I don't think it is could be dust built up on the fan. It sounds like it is trying to load a disk, but there isn't on in the slot where you put one. Any help would be great.

Thank you,
dlkseedig
 

A:Tower sounds

Describe the sound better. Is it a clicking? A beep? A drives clicking sounds bad.
 

https://forums.techguy.org/threads/tower-sounds.543752/
Relevancy 35.26%

Looking for feedback on this new desktop. I am looking to replace a Dell XPS435T / 9000 that I purchased in April 2009 which has served me well.

1. Does the XPS Tower VR require s "Pure Sine Wave" UPS like the XPS435T / 9000?
2. I am planning on having a total of there hard drives in addition to the SSD. Based on the information that I have seen this seems to be possible.
3. I am also trying to determine exactly what 512GB M.2 SSD is being provided.

http://en.community.dell.com/support-forums/desktop/f/3514/t/19989306
Relevancy 35.26%

What do you reckon folks???????????????

A:Whats the best pc tower?

You aren't likely to get a clear answer to this one. It all depends upon what you are trying to accomplish and what your goals are.

Some will insist of full towers, others need/want smaller cases. Some people love windows and lights, and others don't care for them at all.

Generally speaking, there are lots of recommendations on this forum for
Antec
CoolerMaster
Corsair Obsidian 800

http://www.sevenforums.com/hardware-devices/73463-whats-best-pc-tower.html
Relevancy 35.26%

I'm hearin' a new song in my case... It's a Dell Dim 2400, 4 y/o, P4, to which I've just added two HD's, and two [in-spec] ramsticks.

No operational problems; just the buzz/hum sound. It's not rhythmic, or regular. Does it when idling, or photo editing.

And nothing shows in tasman... I'm thinkin' it's my original HD, although it does NOT make the same sound as a HD that's busy - like defragin', or a crash from an app that's wrong. Just a buzz, or hum.

Any ideas?

Thanks
 

Relevancy 35.26%

Recently sound began playing out of my computer tower as well as through the speakers. It seems to happen of its own accord. Sometimes it stops when I restart the computer and sometimes it doesn't.

What do I need to do to fix this? Thanks in advance for any help.
 

A:Sound through the tower

Open the windows volume control and make sure system speaker
is muted.
If there is any other software like the realtek control panel,check
there too.
 

https://forums.techguy.org/threads/sound-through-the-tower.870036/
Relevancy 35.26%

I just got back from being out of town; went to check my email and my computer won't turn on. Everything else is getting power just fine: printer, scanner, router, modem, keyboard, screen. The light won't even come on on the tower. I have: unplugged and replugged from tower and the wall; tried a different and known-to-work power cord; used the toggle on the back of the tower to turn on and off; held the on button in for 5-10 seconds; opened up the case and made sure everything inside is seated firmly.

Any thoughts? I'm a pretty basic user but can follow directions!

Thanks.
 

Relevancy 35.26%

Hello, i just bought an hp z240 workstation (tower format).I'm trying to configure a transcend m.2 30GB drive. After installing it on the dedicate m.2 slot on the motherboard i can't see it in the bios and even in windows 7.the first drive is connected on sata0 (original 1tb hdd with win 7 installed on it)On bios settings the m.2 slot is enabled. any suggestion? Thank you

http://h30434.www3.hp.com/t5/Desktop-Boot-and-Lockup/m-2-ssd-on-hp-z240-tower/td-p/5639374
Relevancy 35.26%

I am purchasing a new Intel Core 2 Quad Processor system. I wish to keep and use my old Dell Dimension 8200 tower with extra hard drives, optical drives and 1.44 floppy drive for storage and whatever. My new machine has Windows Vista Home Premium. The old machine has Windows XP SE2. My home network has three computers wireless and wired.

Where can I learn how to set up and utilize this older tower on my home network? Do I need to leave a full operating system on it? What else do I need to know to make this work efficiently?

'I am guessing the old tower would be a "server." I'm a neophyte when it comes to these matters. All help including the very basics would be much appreciated.
 

Relevancy 35.26%

About 6 months ago, i was moving furniture around in my room and whilst moving, my tower fell over and hit my carpet, and the case cracked. Ive been using my older tower for quite some time now. Ive deleted all viruses, spyware, addware...still didnt help. anyways to the point..I tried to hook up my other tower, which is alot better, but whenever i hook it up and turn it on, i get no reaction from the monitor. Ive tried unplugging and replugging it, and the dell symbol shows up on my monitor but then my monitor goes blank. Ive tried hitting f8 many times, but nothing comes up. Can anyone help me? Ive also opened my tower, cleared any dust, and all parts are connected as they should be.
 

https://forums.techguy.org/threads/help-with-monitor-and-tower.660605/
Relevancy 35.26%

Hello!

I'm wondering whether it's okay to run my Dell Dimension 4600 tower on its side for a few hours. Is that going to cause HDD problems? If I try it on its side will I cause any damage if it won't run, or will it just refuse to go?? There's also a gfx card in it.

I'm hoping that it can run on its side so I can mount my LCD monitor on top of it and have a nice, compact little tower/monitor combo that I can use as a synth via MIDI for a performance.

Thanks for your input,
~Charlie
 

Relevancy 35.26%

I was on my computer when it froze. I tried to get to the task manager by clear alt delete bt it wouldn't work. So I shut it off via power button. When I tried to stat it up it wouldn't turn on. I tried checking the cords and the power source but I couldn't find anything wrong. I unplug the powe cord and tried again the CD drive light and a yellow light below the power light flashed but nothing else. The power light seems to be red. I don't know what's wrong with it could you help? My computer info Compaq Windows XP Home Editor, Intel inside celeron processor. Thank you.
 

Relevancy 35.26%

Hi. Well i have got an HP slimline and had problems with gaming since i have a integrated gfx card, so as i have discovered that a integrated gfx card is not very good i wanted to buy a new one that is more powerful, untill i found out that my slimline is too small to even put a decent gfx card in although i have a slot.
Well i have just bought this computer and do not want to buy a new one. is there a way to take all my things out and put it in a bigger tower then will i be able to fit a better gfx card in? if so how can i even do it.
Thanks for reading and i hope you can help.
 

Relevancy 35.26%

I have been looking for a new computer, was going towards a laptop because of the size of computer, saw a new tower yesterday which just sits next to PC about 6inches long and 2inches high & 4 inches deep, has 2gb hard drive and 2gb memory, do you have any thoughts about this being as good as the normal size tower? Not sure where I should post this hope its okay on this forum.

Barbaramac.
 

A:Solved: tower for PC

Well, a 2GB harddrive is practically microscopic in storage capacity.

I can only assume that the processor is weak, and the graphics card would need to be to fit comfortably in a case that size.

To answer your question, no, it is nowhere near as good as most fullsize desktops, and is a lot worse than most laptops. The only thing that really compares to the tower you described are the ultra-portable notebooks that are mainly used for word processing and web surfing.
 

https://forums.techguy.org/threads/solved-tower-for-pc.728337/
Relevancy 35.26%

During a recent thunderstorm, I shut down my computer for protection. disconnected power. After the storm I reconnected the power and turned on the system and nothing. I have an e-machine model T2984 with XP Windows Home. I have looked inside the tower and can see a small green light burning. Am I missing a reset button or have I lost the power supply unit? The machine has worked great until this problem. The machine is approx. 3 to 4 years old. Anyone have any ideas?
 

Relevancy 35.26%

Hi all

I have a Tuniq Tower 120 on an LGA 775 board.

Does anyone know whether I can get the appropriate rear bracket to fit it on the Gigabyte EX58-UD5 motherboard with an i7 920.

I checked Tuniq's site but they seem to have bought out a new tower for the i7 and I can't find any info on whether it'll fit or I need a bracket(or whether I can get one)

I would have thought the original 120 would do a good job cooling an i7 and I don't want to spend more than I need.

Anyone know anything or have any comments?

Thanks, John

A:Can I use my Tuniq Tower 120 with this lot?

I don't own one.

A little web searching makes it look like Tuniq hasn't produced a backplate and retention bracket for this model for Socket 1366.

I suppose that they could if they wished. My cooler is a Thermalright Ultra 120. It was an existing product to which Thermalright added Socket 1366 support. (Works well on an I7 920 at 3.8 GHz.)

http://www.sevenforums.com/hardware-devices/26247-can-i-use-my-tuniq-tower-120-lot.html
Relevancy 35.26%

Do I need repair?
The tower case gets hot enough to make you "OUCH" when touched
 

Relevancy 35.26%

Hello:I can't afford a new computer right now and I wanna know how can I find out what the Best? parts I can get to upgrade my tower. It dosen't play games very well IE Steam games. Also where can I gtet these parts? Thank you Larry

A:I would like to know how to upgrade my tower please

@BigLarryMan?, welcome back to the forum. Here is the Product Specifications page for the computer.  You can upgrade the processor, memory, video card and power supply unit (PSU). The processor and memory upgrade information entries will give a list of compatible upgrades. Newer video cards require UEFI in the motherboard instead of a standard BIOS.  The last video cards that didn't require UEFI are the GTX 660/670.  They are very powerful cards.  As for the PSU, I like Corsair products.  I recommend at least 500W.  A modular PSU is good for a small case because you only have to use the cables that are absolutely necessary. Please click the Thumbs up + button if I have helped you and click Accept as Solution if your problem is solved. 

http://h30434.www3.hp.com/t5/Desktop-Hardware-and-Upgrade-Questions/I-would-like-to-know-how-to-upgrade-my-tower-please/td-p/5698493
Relevancy 35.26%

I have a Dell 17"" LCD TV/Monitor. The only way I've found to have the sound play through the computer's sound system is to run a line from the earphone jack on on LCD to a "hole" on the tower. Actually did that once upon a time. However, when moving everything to a new desk, we unplugged ALL the cables, lines, whathaveyou. Now, no one can find the bloody slot, hole, or whatever it is that the line from the earphone jack is to go into. Please be rather explicit as I'm in a wheelchair, and thanks to my new set up I can't actually see the back of the tower. My helpers are able to do so, but don't have a clue as to what anything is on the back. Thanks much, Jack My system: Windows XP. Dell 2300.
 

https://forums.techguy.org/threads/sound-from-lcd-to-tower.374501/
Relevancy 35.26%

Ok, i have a great idea, it may be idiotic so that is why i am posting this here.. to get some feedback.

I have gotten my cpu down to 32 C when idle using arctic silver 5.

That is very good, yet I am still not satisfied!

I know that water cooling is even better, but even that can only get the temperature down to as cool as the ambient room temperature is , correct? which would be only as low as about 22C then.

My idea is.... buy a small refrigerator or freezer and put my whole cpu tower inside!!

this should get the temperature down to about 0C or lower with a freezer!

Anytime I want to use the cd drive, i simply open the freezer door, not a big deal! This also allows me to overclock a lot!

What does anyone think of this idea? Would it somehow be dangerous?

appreciate any input thanks
 

Relevancy 35.26%

Since i installed windows 7 my tower started just randomly making that click/tick noise it makes just as your shutting it down or booting it up, the case doesnt restart, just get this weird click noise, in explicable really, just started happening since i updated from 7 and ive no idea if its my PSU or mobo showing signs of early wear or maybe if 7 has a fan controller or something i dont know about that keeps kickin in and out on one of my onboards, im still clueless as to why it came up, and i know this probably isnt the most informative post, but even to know if anyone else has it happen as well would be wonderful

A:Tower clicks

You are going to need to remove the side of the case and try to isolate the noiseA clicking sound is usually related to hard drive problems. Often called the click of deathhttp://datacent.com/hard_drive_sounds.php

http://www.bleepingcomputer.com/forums/t/276233/tower-clicks/
Relevancy 35.26%

When I bought my new cmputer, I didn't transfer my photoshop 7 stuff, now can I hook up my old tower to my new computer, download the PS 7 stuff on to a CD, then upload info onto the hard drive of my new computer? I'm new at this, so if this is a real stupid question, just say so.
 

A:question re tower

You can move any files PS created, but to use the program, it will have to be installed on the new pc.

wrs
 

https://forums.techguy.org/threads/question-re-tower.330086/
Relevancy 35.26%

Hi all.

Not too long ago, I saw this amazing looking pc that was part of a contest that featured an LCD screen on the front of the tower. It was blue, and looked almost like it read off all of the specs for the interior of the pc, as well as the hard-drive and mobo running capacity and such. I am pretty sure it also acted as a fan controller. But it seemed ultimately like it was just there to read off the pc specs of usage and such.

It looked to be about the size of half the case, and probably pretty expensive. It looked really sharp and useful though.

Anyone know what this is or where to find it or something similar?

Also, anyone tried out those fingerprint readers for your pc that removes the need to remember any password? They are only 40 bucks so its worth a shot...any reviews?
 

A:PC Tower LCD Screen

http://www.crystalfontz.com/ is my LCD supplier...

Software and drivers are available from their page.. There's also quite a bit of third party LCD software floating around, of the open-source variety..
 

https://forums.techguy.org/threads/pc-tower-lcd-screen.320146/
Relevancy 35.26%

I thought I had started a "help!" thread on this subject earlier today, but can't find it. Must have had a "senior moment" and not licked the submit button!
Here is my problem:
I see a tutorial on the HP site that explains how to add a PATA to my new machine (Adding or Replacing a Hard Drive HP Pavilion p6347c Desktop PC - HP technical support (Ireland - English)), but it remains a mystery to me how to match any of my connectors to the old drive. I see no parallel cable anywhere! And if I need to go and buy one, where the hell is the connection on the motherboard? The tutorial assumes I know all this, but if I did, I wouldn't need the tutorial.

A:installing IDE in new tower.

Look for a blue connector next to the 24pin power connector. I can see it in the manual
http://h10032.www1.hp.com/ctg/Manual/c01859455.pdf

http://www.sevenforums.com/hardware-devices/102038-installing-ide-new-tower.html
Relevancy 35.26%

solved
 

A:Optiplex GX1 Tower

Jonathon,

You need to use Thread Tools in the ORIGINAL Post to flag you Q as solved. Creating an unrelated new Post is a compounded problem.
 

https://forums.techguy.org/threads/optiplex-gx1-tower.366470/
Relevancy 35.26%

I was fixing someone's computer. (Win XP). All of a sudden this computer crashed. While I wasn't there. This person called Gateway (the maker of their computer). They said it was most likely a short in the tower. Does anyone know of symptoms the computer would be experiencing if this was a short in the tower. (Before the actual crash, her computer was giving the same error message and it had been happening for over a year now). Thanks.
 

Relevancy 35.26%

Hi...Lately, I have been getting noises in my tower when I run on line tests like Panda Active Scan and Window Security Trojan Scan that are like those that emergency vehicles make in Europe. It doesn't happen with Housecall antivirus or when I run Ad Aware se. Sometimes the same noise comes when I run Spybot 1.3. The noise stops at the end of the scan and no viruses are found. What can I do to stop this because it does get rather annoying?
Regards.
 

Relevancy 35.26%

Hi
  I  would like to purchase a secondhand tower Desktop PC, which seems a bargain,
 
but the seller has confused me as i have asked if it is a genuine installed Windows 7 Professional edition which
 
is all i would like to purchase, A genuine  Windows 7 professional installed on a Desktop,
 
the seller has explained in email   "I only have a copy of the disk but  it's a real copy with a legal code"
 
Would this be genuine ?
 
I would be grateful for some advice please.
Ben
 
 

A:Secondand Tower

"I only have a copy of the disk but it's a real copy with a legal code" should set off red flags.The copy would be "real" (it certainly would not an unreal copy) but it is still copy. You don't know if he has given anyone else the same copy with the same license.

http://www.bleepingcomputer.com/forums/t/571422/secondand-tower/
Relevancy 35.26%

i have a yr old desktop hp humming tower pc pc with mb of mem recently added motherboard is a trigem have celeron processer ghz i have two fans inside case first one is cpu fan the other fan is inclose inside its own case inside the pc tower and blows hot air outside the pc through the back below that is a vent the sides of pc tower have vents but are small the pc tower is sitting on two sm bricks that allow air to flow underneath it i have the pc tower in a desk cabinet with the door on the front that can be open which i have open when pc is on the back of the cabinet is open pc tower humming so air can escape and so i can hook up wires to pc i also have made sm pc tower humming vents in both sides of desk cabinet to allow for cross ventlation thus my problem i still notice a humming from pc at times when visiting gaming sites not the poker sites but sites like teagames com mousebreaker com etc i usually download sm size games under mb but don t play them everyday what i notice is when i do play these games after a while i notice pc get noiser and right side of tower gets a little warm to the touch leaving site pc quiets down and tower cools off but i still notice faint humming noise coming from pc almost have to put ear to tower to hear it any ideas or thoughs on a possible solution would be big help nbsp

Relevancy 35.26%

I have just had a phone call from me girlfriend. Her pc tower is not turning on when she presses the ON button on the front of the pc. She has unplugged all units, inc printer, monitor and scanner. Then plugged them back in, the tower is the only thing that is still not working. Now the printer is not working either.

Any help would be appreciated thanks
 

Relevancy 35.26%

Hi there, Not sure if this is the right forum for this question......

But basically i wanna upgrade my desktop PC. I don't need Monitor, keyboard, printer etc i just wanna buy a new Tower and plug it straight in.

Now does anyone know of any good websites i could look at, prefably in the UK as thats where i live.

Also just a bit of advise regarding 32 bit & 64 bit, what exactly does this mean and where on the PC spec is it shown?

Many Thanks
 

Relevancy 35.26%

I just purchased a new PC tower. I stayed with Windows 7 because didn't like the way 10 functioned. The tower is thin. The one feature I don't like is the DVD drawer is vertical. Can I lay it on its side if I put legs on the tower to allow for the circulation for the cooling fan? I have a couple of older grandchildren (H.S. & College) that come to the house and use the computer. I know that they are careful, but I have a concern about their use of the DVD/CD drawer.
mthumjdo
 

Relevancy 35.26%

Hey guys,

i was wondering if anyone knew or could recommend a tower, full would be nice, that has the space for 3 hard drives; but with generous space for hdd coolers to be mounted on each.

Currently have a midi tower, micro atx with 3 hdd but they are literally bunked together and no fan at all can be fitted between them. this is quite unstable i would imagine. Temps are around 45c; when i had one it was about 21c. so i just need a case that would accomidate for 3 hard drives that allows space, about at least an inch between. also be nice if the case had memory card reader built in with a nice design. price doesn't really matter.

cheers!
 

Relevancy 35.26%

I don't know if this is the right forum for it but...

I was wondering if there is any problem with placing a subwoofer on top of my PC? It's a pretty small sub and doesn't vibrate so much but I was just wondering if anyone knows of any problems with this?
 

Relevancy 35.26%

This may sound strange but. I pulled an old tower out of my closet to see if it works. It kinda does. When I turn it on the fans go and the lights to but it dosent turn on on. It's like its in a standby. But yesterday I was messing with it and I went to move it (it was still on) and I heard a click, the fans slowed down, and the computer fully turned on. I am at my limit here. What do I do!?
 

Relevancy 35.26%

I just put together my new computer for the first time successfully Now I am wondering what to do with my old one Its still operating however it is approx years old running on an Intel Pentium I m old my not? scavenge tower To or not sure what components it has atm but I am wondering if I should look to see if anything it has is worth adding or installing in my new build My current tower has To scavenge my old tower or not? the following and my old tower had both a cd burner and a dvd burner plus some additional RAM i added but it probably isn t compatible I also know To scavenge my old tower or not? it was running a Radeon Sapphire gfx card Mushkin Enhanced Chronos Deluxe MKNSSDCR GB-DX quot GB SATA III MLC Internal Solid State Drive SSD Western Digital Caviar Black WD AALX GB RPM SATA Gb s quot Internal Hard Drive -Bare Drive Corsair Carbide Series R Black Steel structure with molded ABS plastic accent pieces ATX Mid Tower Computer Case ASUS P Z -V PRO GEN LGA Intel Z HDMI SATA Gb s USB ATX Intel Motherboard with UEFI BIOS XFX HD- X-CNDC Radeon HD GB -bit GDDR PCI Express x HDCP Ready CrossFireX Support Video Card with Eyefinity Intel Core i - K Sandy Bridge GHz GHz Turbo Boost LGA W Quad-Core Desktop Processor Intel HD Graphics CORSAIR XMS GB x GB -Pin DDR SDRAM DDR PC HP X Multiformat DVD Burner Black SATA Model i LightScribe Support CORSAIR H CWCH Extreme Performance Liquid CPU Cooler CORSAIR Enthusiast Series TX V W ATX V v EPS V v PLUS BRONZE Certified Active PFC High Performance Power Supply nbsp

A:To scavenge my old tower or not?

Somewhere there is a young and budding computer tech who would love to have that, and improve upon it, if the price is right.

Otherwise, it is always helpful to have a computer in reserve for when things do not go right. on the new one.
 

http://www.techspot.com/community/topics/to-scavenge-my-old-tower-or-not.175341/
Relevancy 35.26%

Our power went out. 30 minutes later the power came back on. Everything connected to my PC came on except my tower. The printer, the router, the camera etc are all up and working - the tower will not come back on. The monitor screen will display the code warning bar when that button is turned on - otherwise the PC is dead. I have a laptop but all my documents are on the other computer - what do I do. We unplugged from the wall, replugged everything into the tower etc...nothing works. Could it have blown a fuse?
 

A:Dead tower

The computer might've been fried.
Have you tried plugging into different outlets?
 

https://forums.techguy.org/threads/dead-tower.565143/
Relevancy 35.26%

Hi all I am about one? CPU I cooling the or tower Should my old OEM use to start my computer upgrade and have a question The AMD FX- Vishera GHz GHz Turbo Socket AM W Six-Core Desktop Processor I am using came with a cooling tower in the box http www newegg com Product Product aspx Item N E It s not nearly as big as the one I purchased Should I use my old CPU cooling tower or the OEM one? for my previous iteration back in It s a Rosewill RCX-Z mm Ball CPU Cooler http www newegg com Product Product aspx Item Should I use my old CPU cooling tower or the OEM one? N E My question is should I go with the new smaller one or remove clean and re-use my Rosewill cooler on this CPU It has seen almost continuous use since I built it in but I am not an overclocker and most use is light I do occasionally use it for gaming but not extensively I am certain the Rosewill has far greater cooling capacity but I don t know about the longevity I might expect to get out of it Should I use my old CPU cooling tower or the OEM one? It s still very quiet and seems to be perfect in every way so far I am on a budget so would prefer not to buy a new aftermarket one but rather choose between the two I currently have available PS my computer case has a side fan in addition to the big one on the back of the case Any thoughts would be appreciated nbsp

A:Should I use my old CPU cooling tower or the OEM one?

if u read the comments in the newegg link for the Vishera alot of people are saying the stock heatsink sucks......so probably use the rosewill cooler if it is quiet and works well.......... and i wouldn't worry about longevity, u can always replace the fan on it if and when it fails
 

https://forums.techguy.org/threads/should-i-use-my-old-cpu-cooling-tower-or-the-oem-one.1097093/
Relevancy 35.26%

Hi

I bought the Lego Robotics System some years ago and since some months I use it again with Java + Eclipse + Lejos but the problem is since I have W7 the USB Tower doesn't work because I only have Drivers for XP.

Do you have any idear how I can get it to work on W7?

Thanks for help!
Greetings
Julian

A:Lego USB Tower

try finding vista drivers they might work better

http://www.sevenforums.com/drivers/3445-lego-usb-tower.html
Relevancy 35.26%

I am running Windows 2000Pro on a Vectra 400 series tower. The unit seems like a heavy duty work horse, but is a bit noisier than I am used to hearing in a business setting. At a job I left sometime back and in my current position we are using XP on newer and smaller HP towers. They run very quietly. I am trying to set my unit up to do voice-over freelance work. Is there anything I can do to run a bit quieter. Also I downloaded a backup program called LojiklSweep for my system. Any suggestions for checking to make sure they have all of my backup material on file in case this older system takes a dive?
 

Relevancy 35.26%

Win XP Ser 3, Got error message CPU changed or Ratio changed fail, Reenter CPU Settings in CMOS. So I changed the battery then changed the date in BIOS. Don't know what else to do?? My mentor passed away and I'm lost.

A:tower won't shut down

Post the make/model of the PC. If custom built then post the specs.

MB-CPU-RAM-GPU-PSU brand/wattage

http://www.techsupportforum.com/forums/f10/tower-wont-shut-down-518184.html
Relevancy 35.26%

i want one for hopefully $400 to $500. i want to be able to play YouTube video's on an

HDTV that will be connected to it. i want to be able to open multiple tabs at the same time

on my Firefox browser. i am not a gamer. i don't do video, movie or major graphic editing. i

can't open multiple tabs at the same time on my present PC. it has a core i3 processor. my

memory usage stays around 2GB Even during video playing. i don't use much processor

power even when playing video's. i have an Intel HD graphics card.
 

Relevancy 35.26%

Hello,
Was looking for advice on running two monitors/Screens in separate rooms off of one tower..
Should I try to get two video cards, or is there a successful way to have a Split like VGA cable to run to two separate rooms, from one tower/video card?
THANKS IN ADVANCE!!!