Windows Support Forum

Mouse cursor shaking from side to side

Q: Mouse cursor shaking from side to side

Hi all,

I found this issue in the last day or two, progressingly getting worse. It did it with two separate mice and would not go away. After some thinking I decided to remove the usb plug from NEXT to the one I was using for my mouse. It fixed the issue. I think that the reason I was having an issue was that the usb ports could not handle so much load on all of them, and therefore was causing glitches in the data when it was sending and receiving from the mouse. If in doubt, remove all usb plugs and try it again. Thats my 2 cents for today

http://www.techspot.com/community/topics/mouse-cursor-shaking-from-side-to-side.181179/
Relevancy 100%
Preferred Solution: Mouse cursor shaking from side to side

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Relevancy 109.22%

I recently was given this netbook Acer AspireOne Netbook AOA - It is running Win XP I just had a question When I put my mouse to the right side it disappears The scroll bar is almost gone off the side of the screen It isn't a PROBLEM but it is annoying I have checked my display adapters and in Device manager there are listed In properties right clock on desktop disappears cursor right side Mouse of screen on there are monitors listed One says default it is listed as and the other is listed as plug and Mouse cursor disappears on right side of screen play When I click identify the netbook screen is identified as use this device as the primary monitor and extend my windows desktop onto this monitor are checked on display but greyed Mouse cursor disappears on right side of screen out and I cannot uncheck them When I switch to the second display the extend my windows desktop option is not checked and the use this device as the primary monitor is not either and is greyed out If I click on the extend option it ungreys and I can click use this device as primary However it doesn't change anything Any ideas It's more of an annoyance than anything OMG don't judge me message edited by shanna

A:Mouse cursor disappears on right side of screen

See if #3 helps in any way:http://www.computing.net/answers/wi...Always pop back and let us know the outcome - thanks

http://www.computing.net/answers/windows-xp/mouse-cursor-disappears-on-right-side-of-screen/203389.html
Relevancy 107.93%

I?ve updated to Windows 10 and after doing so the trackpad/touchpad mouse side to side and vertical scrolling no longer work. These worked fine before converting from Windows 7. I have an Acer Aspire 5750 laptop and the trackpad/touchpad mouse hardware is ELAN ELAN driver date and version: 24/09/2015 - 11.15.0.18 

A:Updated to Windows 10 - now mouse side to side and...

Uninstall the mouse from device manager and reboot the computer.

http://community.acer.com/t5/Windows-10/Updated-to-Windows-10-now-mouse-side-to-side-and-vertical-scroll/td-p/418443/jump-to/first-unread-message
Relevancy 107.93%

I?ve updated to Windows 10 and after doing so the trackpad/touchpad mouse side to side and vertical scrolling no longer work. These worked fine before converting from Windows 7. I have an Acer Aspire 5750 laptop and the trackpad/touchpad mouse hardware is ELAN ELAN driver date and version: 24/09/2015 - 11.15.0.18 

A:Updated to Windows 10 - now mouse side to side and...

Uninstall the mouse from device manager and reboot the computer.

http://community.acer.com/t5/Windows-10/Updated-to-Windows-10-now-mouse-side-to-side-and-vertical-scroll/td-p/418443
Relevancy 105.78%

ok i got this new rig with a his x800xl video card and a 19 inch flat starlogic crt and it rips everything but sometimes the right of my screen mostly towards the top will start shaking.......sometimes just a little but sometimes a lot and makes in really annoying.....i thought i had a bad monitor so i exchanged it for a new one but it still shakes sometimes....am i pushing this monitor too hard and i need to go to an lcd or is my video card messed up any help would be greatly appreciated thanx
 

A:right side of picture shaking

deano, the problem might be that your monitor might be placed in a redius of a electronic device, eg microwave. also things with a magnetic source eg a subwolfer. i had this same problem and since i moved my computer into a different room then it has been fine. nothing wrong with video card
 

http://www.techspot.com/community/topics/right-side-of-picture-shaking.32678/
Relevancy 92.45%

So recently I received a blue screen of death The error was something along the after - File Check configuration application incorrect System Side-by-side errors lines of page fault in nonpaged area When it restarted windows advised me to perform a system file check So I left my computer for a bit and when I came back it was already at the logon screen However when I logged on and started firefox first thing I noticed was that all my bookmarks and some extensions had been wiped I then tried to start Microsoft Word but I received the following error amp quot The application has failed to start because its side-by-side configuration is incorrect amp quot I receive that error for most of my other programs When I tried to run event viewer it says amp quot MMC could not create the snap-in amp quot Please help Is it possible to restore my applications without reinstalling them all Sysinfo Log Tech Support Guy System Info Utility version OS Version Microsoft Windows Home Premium Service Pack bit Processor Intel R Core TM Duo CPU P GHz x Family Model Stepping Processor Count RAM Mb Graphics Card ATI Mobility Radeon HD Mb Hard Drives C Total - MB Free - MB D Total - MB Free - MB Motherboard Dell Inc F N A WZ S CN K Antivirus Microsoft Security Essentials Updated and Enabled EDIT I ran SCF again It said it detected corrupted files but when I restarted my computer I am still unable to run most of my applications Itunes also requires me to reinstall Latest Minidump also attached nbsp

A:Side-by-side configuration incorrect - application errors after System File Check

https://forums.techguy.org/threads/side-by-side-configuration-incorrect-application-errors-after-system-file-check.1003342/
Relevancy 92.45%

When I'm reading a message I have to scroll right to see the rest of the sentence. Is there a way to show the entire message in one window?

Thanks
 

A:Solved: Remove necessity to scroll side to side in order to read text.

https://forums.techguy.org/threads/solved-remove-necessity-to-scroll-side-to-side-in-order-to-read-text.546692/
Relevancy 92.45%

G'day everyone - I suspect this issue will be a tough one to get help with!

I've attached a screen-capture of a Microsoft Office Excel 2007 spreadsheet I'm working on at the moment. As you will be able to see on the screen-capture, I've marked the areas of interest and will explain here...

When I enter a name in this column (marked as '1'), I want the spreadsheet to check another column (marked as '2') to see if there is a match. If there is a match, I then want the spreadsheet to check the column marked as '3', and subtract that amount from the column marked as '4'. If there is no match between the column marked as '1' and the column marked as '2', I don't want anything to happen.

I hope that made sense, and if anyone can help me with a solution here, I would greatly appreciate it.
 

A:Solved: Calculating Side-By-Side Cells Dependant On Text Entries In Excel

https://forums.techguy.org/threads/solved-calculating-side-by-side-cells-dependant-on-text-entries-in-excel.833879/
Relevancy 92.45%

Problem I m trying to retrieve a problem from sub server-side client-side Solved: variable setting client-side lt form gt element value into a server-side variable The code works if I explicitly set strCCLastNameValue a data value in the db table column quot care Contact Last Name quot such as quot Jones quot I hope I have explained the situation adequately Thanks for any suggestions on resolving this issue Here s the code Solved: problem setting server-side variable from client-side sub in an asp file lt script language quot Solved: problem setting server-side variable from client-side sub VBScript quot gt Sub Solved: problem setting server-side variable from client-side sub prepop lt Dim dbConn oRS sSQL strCCLastNameValue strCCLastNameValue document getElementById quot careContactLastName quot value THIS IS THE LINE THAT IS GIVING ME PROBLEMS Set dbConn Server CreateObject quot ADODB Connection quot dbConn Open quot Provider SQLOLEDB Server MYServerurl Database wpgXXXXX NetworkLibrary DBMSSOCN UID XXXXX PWD YYYYYYYY quot Set oRS Server CreateObject quot ADODB Recordset quot oRS CursorLocation adUseClient With oRS ActiveConnection dbConn Source quot SELECT FROM CareMinistry WHERE care Contact Last Name quot amp strCCLastNameValue amp quot quot CursorType LockType CursorLocation Open End With oRS MoveFirst gt Then fill the lt form gt with the selected row document addform entryStatus value quot lt oRS quot entry Status quot gt quot document addform entryCategory value quot lt oRS quot entry Category quot gt quot document addform entryDate value quot lt oRS quot entry Date quot gt quot document addform entryTime value quot lt oRS quot entry Time quot gt quot document addform careContactLastName value quot lt oRS quot care Contact Last Name quot gt quot and more fields to fill lt Close objects gt End Sub In the asp file which invokes the above sub on a quot onclick quot event of the following lt input gt the Form is as follows lt form name quot addform quot method quot POST quot action quot https toMyWebserver CBC-CareMinistry RELM do DB listings secure asp quot gt lt Table cellspacing quot quot cellpadding quot quot bgcolor quot ffffff quot width quot quot BORDER quot quot gt lt tr gt lt td width quot quot height quot quot align quot right quot bgcolor quot FFFFCC quot gt Search on Last Name lt td gt lt td height quot quot bgcolor quot FFFFCC quot gt lt input type quot text quot name quot searchCareContactLastName quot id quot searchCareContactLastName quot value quot quot size quot quot gt lt td gt lt td bgcolor quot FFFFCC quot gt lt input type quot button quot name quot nameGo quot id quot nameGo quot value quot Go quot size quot quot onclick quot return prepop quot gt lt td gt lt tr gt lt table gt The SQL table defines multiple columns each of which is of type quot varchar quot with the column of interest being care Contact Last Name nbsp

Relevancy 92.45%

I am trying to fix my friends computer which is having several weird issues. When you login everything appears to be normal but Windows loads to a black screen with a cursor. Ctrl + Alt + Del to task manager and I can run explorer.exe to restore the desktop. However the problem now is once your at the desktop all programs when you try to run them pop up with an application failed to run side-by-side configuration is incorrect. these problems are not apparent when the computer is ran in safe mode, but I can not figure out what to do. I checked the registry HKLM software windows nt logon and explorer.exe is the value.
Malwarebytes when ran in safe mode does not detect anything either.

A:windows logs in to a black screen, programs have side by side config

Some possibilities: this application failed to start because side-by-side-configuration is incorrect

Was this computer upgraded from Vista to Windows 7? If so that may be the cause. You can try doing a Repair Install of Windows 7 to see if that corrects the problem.

http://www.sevenforums.com/general-discussion/224272-windows-logs-black-screen-programs-have-side-side-config.html
Relevancy 92.45%

First post I am coming to you as a last side work by programs Vista x64: :( halp no configuration error, Side resort I built my own PC and installed Vista Ultimate bit OEM edition Has been working fine for years Now every time I attempt to open a program I get the error quot The application has failed to start because its side-by-side configuration is incorrect Please see the application event log for more detail quot The only progam that is barely working is IE bit edition Vista x64: Side by side configuration error, no programs work halp :( I cannot download or run any files Microsoft wants to speak to a technical support representative What a joke multibillion dollar company wants extra for tech support Doing a ton of research I have tried various things to remedy this with no avail System restore did not work Doing a sfc scannow in command prompt does not work it does not even run Wasted hours of my life doing a thorough checkdisk as well The error in the event log is as follows Error in manifest or policy file quot C Windows WinSxS manifests x microsoft windows c -controls resources b ccf df en-us e f f dfabb manifest quot on line Invalid Xml syntax So the problem has to do with this manifest file I really am clueless as to my next move I can not download and run anything at all Can I do a Vista repair installation with my OEM version Should I try and get my hands on a cheap upgrade version of Windows

A:Vista x64: Side by side configuration error, no programs work halp :(

Welcome
Until our Forum expert in this area, Niemiro, comes on line, maybe this will give you a lead.
side by side configuration

http://www.vistax64.com/general-discussion/287781-vista-x64-side-side-configuration-error-no-programs-work-halp.html
Relevancy 92.45%

Hi all I wounder if some can help me please I have an error and stopping all fucctions Side 32bit by many apps side error window's message coming up on Side by side error stopping all 32bit apps and many window's fucctions all bit application that says the application has failed to start because its side-by-side configuration is incorrect I have done a lot of searching and found that most Side by side error stopping all 32bit apps and many window's fucctions say I have to uninstall Visual C then load an update from Microsoft That s great but the side by side error won t let me uninstall or install anything I ran sfc scannow and it found some error and did not fix others The log is below I hope Side by side error stopping all 32bit apps and many window's fucctions someone can help Code CBS log - - Info CBS Starting TrustedInstaller initialization - - Info CBS Loaded Servicing Stack v with Core C Windows winsxs amd microsoft-windows-servicingstack bf ad e none ce c de cb f cbscore dll - - Info CSI WcpInitialize wcp dll version called stack x fee ef ad x fee a x fee e xff e c xff d xff db f - - Info CSI WcpInitialize wcp dll version called stack x fee ef ad x fee f x fee c aac x fee b xff e c xff d - - Info CSI WcpInitialize wcp dll version called stack x fee ef ad x fef x fef xff e xff d de xff db f - - Info CBS Ending TrustedInstaller initialization - - Info CBS Starting the TrustedInstaller main loop - - Info CBS TrustedInstaller service starts successfully - - Info CBS SQM Initializing online with Windows opt-in False - - Info CBS SQM Cleaning up report files older than days - - Info CBS SQM Requesting upload of all unsent reports - - Info CBS SQM Failed to start upload with file pattern C Windows servicing sqm std sqm flags x HRESULT x - E FAIL - - Info CBS SQM Failed to start standard sample upload HRESULT x - E FAIL - - Info CBS SQM Queued file s for upload with pattern C Windows servicing sqm all sqm flags x - - Info CBS SQM Warning Failed to upload all unsent reports HRESULT x - E FAIL - - Info CBS No startup processing required TrustedInstaller service was not set as autostart or else a reboot is still pending - - Info CBS NonStart Checking to ensure startup processing was not required - - Info CSI IAdvancedInstallerAwareStore ResolvePendingTransactions call flags progress NULL phase pdwDisposition x fc - - Info CSI Creating NT transaction seq objectname quot null quot - - Info CSI Created NT transaction seq result x handle x - - Info CSI CSI perf trace CSIPERF TXCOMMIT - - Info CBS NonStart Success startup processing not required as expected - - Info CBS Startup processing thread terminated normally - - Info CSI CSI Store x b initialized - - Error CSI F Invalid attribute name found l quot ProcessorArchiteature quot gle x - - Error CSI a F d win sp gdr base wcp identity id baseidentity cpp Error STATUS SXS INVALID IDENTITY ATTRIBUTE NAME originated in function Windows Identity Rtl Implementation CRtlIdentityBase CRtlIdentityBase Initialize expression pBAI gle x - - Error CSI b F STATUS SXS INVALID IDENTITY ATTRIBUTE NAME from Windows Identity Rtl Implementation CRtlIdentityAuthority IRtlIdentityAuthority Parse flags string l quot e ec bc cd ed bbb dd Culture neutral Version PublicKeyToken bf ad e ProcessorArchiteature amd versionScope NonSxS quot gle xd - - Error CSI c F HRESULT FROM WIN from Windows ServicingAPI CEnumCSI COMPONENT IEnumCSI COMPONENT Next gle x b - - Info CSI d SR Verifying x components - - Info CSI e SR Beginning Verify and Repair transaction - - Info CBS Archived backup log C Windows Logs CBS CbsPersist cab - - Info CSI f Repair results created POQ starts POQ ends - - Info CSI SR Verify complete - - Info CSI SR Verifying x components - - Info CSI SR Beginning Verify and Repair transaction - - Info CSI Manifest hash for component ml l quot amd b f cc ad c f b ba b bf ad e none c da b b quot does not match expected value Expected l b ef fbb abadf d a e d d ad b a cb cfe cf ed d Found l b ef fbb abadf d ... Read more

A:Side by side error stopping all 32bit apps and many window's fucctions

Hi scott and Welcome to Seven Forums.

Did you try to boot into safe mode? Or even better a system restore?

http://www.sevenforums.com/general-discussion/284074-side-side-error-stopping-all-32bit-apps-many-windows-fucctions.html
Relevancy 92.45%

So I had the same problem as above I had developed a dll using Qt that worked fine on my machine but would not register on another The failed Solved: as configuration has side application to incorrect side start is by familiar quot This application Solved: application has failed to start as side by side configuration is incorrect has failed to start because the application configuration is incorrect quot appears when I ran the depencency walker on the dll So this was the solution that worked for me which may help some others see what s going wrong here Within my dll the manifest emedded read lt xml version quot quot encoding quot UTF- quot standalone quot yes quot gt lt assembly xmlns quot urn schemas-microsoft-com asm v quot manifestVersion quot quot gt lt dependency gt lt dependentAssembly gt lt assemblyIdentity type quot win quot name quot Microsoft VC DebugCRT quot version quot quot processorArchitecture quot x quot publicKeyToken quot fc b b a e e b quot gt lt assemblyIdentity gt lt dependentAssembly gt lt dependency gt lt assembly gt It seemed that the assembly definition was not found upon my client computer So then from within my original computer s Windows WinSxS directory I copied the x Microsoft VC DebugCRT f directory and it s associated files within the Policies and Manifests directories onto the client computer Once copied the dll registrered fine Hope this helps nbsp

A:Solved: application has failed to start as side by side configuration is incorrect

As above where?
 

https://forums.techguy.org/threads/solved-application-has-failed-to-start-as-side-by-side-configuration-is-incorrect.758168/
Relevancy 92.45%

all instructions can be found here at
http://www.howtogeek.com/howto/17342/upgrade-office-2003-to-2010-on-xp-or-run-them-side-by-side/

 

https://forums.techguy.org/threads/upgrade-office-2003-to-2010-on-windows-xpor-run-them-side-by-side.1007320/
Relevancy 92.45%

i cant open my windows live movie maker due to Side by Side configuration error. Can anyone help me?

A:Windows Live movie Maker Side by Side configuration error

Isn't that a Win 7 app?

http://www.vistax64.com/software/297074-windows-live-movie-maker-side-side-configuration-error.html
Relevancy 92.45%

I have a spreadsheet that has nine columns. Once of these columns (the fourth column) is used for a single character as a method of immediately letting the user know that the row in particular is different to the others. So, there's nothing different about that at all.

What I'd like to be able to do, though, is to have the other eight columns (the three columns before the column mentioned above and the five after) all change their background colour when the single character is entered in the fourth column.

So, if the user inputs data in a new row and leaves the fourth column cell blank, nothing happens. If the user enters the symbol (let's say it's a "#"), then the nine columns will all change their background colour to red.

If anyone can help me with this, I'd greatly appreciate it.
 

A:Solved: Formatting Side-By-Side Cells Dependant On Single Cell Value?

https://forums.techguy.org/threads/solved-formatting-side-by-side-cells-dependant-on-single-cell-value.877970/
Relevancy 92.45%

I have an Inspiron 5545 running win10.
On opening, the right side hinge on the keyboard section pulled three screws and inserts free, cracked the plastic in the corner where the hinge is located, killed the WiFi, and caused an intermittent vertical line to appear on the screen.
The laptop has never been out of  the house, never dropped, and seldom left my lap when I was home.
It runs, but is held together with aa 1.5" black paper clamp and connects to the home network via a USB WiFi dongle from Wal-Mart..
This is my fourth or fifth laptop and the first to have the case fail.  This is a design failure in my opinion.  Boo on you, Dell.  I've bought a lot of your computers over the years because they worked and did not fall apart with normal use.  This one disappoints.
Rev. William J McVay, D.D.

http://en.community.dell.com/support-forums/laptop/f/3518/t/19981821
Relevancy 92.02%

I sometimes find that some pictures look more or less the same & like to compare them side by side to see which I like best.

http://www.vistax64.com/software/239704-can-i-set-windows-photo-gallery-display-2-more-photos-side-side.html
Relevancy 92.02%

Hi whenever i open the Microsoft word documents infact every microsoft application is not opening.

To fix this sissue steps taken

1)installed Microsoft visual c++ 2010 as all previous versions are already installed

2)run sfc /scannow result:corrupted files found but cannot repair

3)repaired Msoffice home and student edition

4)uninstalled msoffice

5)when reinstalling it won't install

6)so at the end i restored my system from where i started.

Can anybody please help me in resolving this issue
i am using windows vista home premium edition.

A:Application Failed to start side by side configuration incorrect

I have posted 3 posts for help but unfortunately no one has replied with solution on any of the issues so i think that no one here is bothered here to help. I am greatly disappointed by this forum as i joined to interact and get help and help others however i am not getting any help.

http://www.bleepingcomputer.com/forums/t/415562/application-failed-to-start-side-by-side-configuration-incorrect/
Relevancy 92.02%

Hello Richard,

I've run a scan and the result appears encouraging:

"Windows Resource Protection" did not find any integrity violations."

Attached is a copy of the results: sfcdetailsFrancaBB.txt

I'm moving on to the sxstrace ... according to Lorien's directions.

George

A:Side-by-side configuration error after Quicken 2010 upgrade

Hello George!

Well done on creating a new thread. Thanks for that!

Well, nothing wrong in the SFC log. That has got to be good - as long as we get a lead from one of the other logs!

Thanks for continuing on. I am afraid that I can do nothing until I get those other logs, as that SFC logs showed nothing wrong.

Again, thank you, and the very best of luck!

Richard

http://www.vistax64.com/software/287466-side-side-configuration-error-after-quicken-2010-upgrade.html
Relevancy 92.02%

Is there such a program that will force any video or video game(executable) to display in SBS image? I would like to use this program to play video games from my pc on my GearVR unit. I feel like this shouldnt be too hard to do overall. I know apps like this exist for mobile. I want something like this for my pc. Please help, I beg of you.

http://www.computerhope.com/forum/index.php/topic,157651.0.html
Relevancy 92.02%

So far I have done this and it did not help:

1. Open an elevated command prompt. To do this, click Start, click All
Programs, click Accessories, right-click Command Prompt, and then click Run
as administrator. If you are prompted for an administrator password or for a
confirmation, type the password, or click Allow/Continue.

2. Type the following command, and then press ENTER:
sfc /scannow
(The sfc /scannow command scans all protected system files and replaces
incorrect versions with correct Microsoft versions.)


FYI, She gets the message when trying to launch the Second Life Phoenix Viewer, however Second Lifes Viewer 2 loads without error.

I am going to perform a CHKDSK on her Lenovo as recommended in an archived thread from this forum and hopefully that will solve the issue. Can anybody think of anything else?

A:Experiencing (side by side application error). Need troubleshooting tips

What is the application error? Can you upload a snip

See How to Use the Snipping Tool in Vista For More Information

http://www.vistax64.com/crashes-debugging/286501-experiencing-side-side-application-error-need-troubleshooting-tips.html
Relevancy 92.02%

Hello and thank you in advance for your to open configuration when Side-by-side trying incorrect excel & word help I am in desperate need To be honest I m not entirely sure when this problem started as I haven t been on much the last week or so but I ve tried all the trouble shooting I could find but still cannot manage to fix this problem When I try to open Word or Excel I get an error message quot The application has failed to start because Side-by-side configuration incorrect when trying to open excel & word its side-by-side configuration is incorrect Please see the application event log or use the command-line sxstrace exe tool for more detail quot Not totally sure what that means but I have ran an administrative command prompt of sfc scannow and all my bad Side-by-side configuration incorrect when trying to open excel & word files are fixed at least that s what it tells me when I try to run it again I also read tips where it tells you to go to the Event Viewer to get more details on the side-by-side problem Well this seems to be having a problem too I get an error message saying quot MMC could not create the snap-in The snap-in might not have been installed correctly Name Event Viewer CLSID FX b ad-fe c- -be - cbb cb quot I did just get rid of the Scour redirect virus and I m sure this was happening while I had that not sure if it s related but when I scan and am doing another just to check I come up clean Thanks again for your help

A:Side-by-side configuration incorrect when trying to open excel & word

Well...have you tried uninstalling the MS Office suite...and then reinstalling?

It could have become damaged. Uninstalling/reinstalling, then updating it would take care of that possibiliity.

Louis

http://www.bleepingcomputer.com/forums/t/411735/side-by-side-configuration-incorrect-when-trying-to-open-excel-word/
Relevancy 92.02%

I get this message whenever i try to start ay program in the Microsoft office and with trillian. I have tried re installing office but have not had any success in getting the program to run. Is there anything i can do to get these programs running again?

 error.png   152.54KB
  10 downloads

Thanks,
Ryan

A:the application failed to start because its side-by-side configuration is incorrect

I saw that message in Office 2010 when I had it over more than one drive, program on C, files on E it went badly. ended up uninstalling an re-installing on just C:// and never had the issue again

http://www.bleepingcomputer.com/forums/t/399912/the-application-failed-to-start-because-its-side-by-side-configuration-is-incorrect/
Relevancy 92.02%

My vista home premium was running perfectly until June after a recommended download from the Microsoft update site Microsoft NET Framework Client Profile for Windows Vista x KB At first I couldn t even get on the internet at all Local only network Called my ISP verified it was not their hardware or my computer Called Microsoft they at least got me back to the internet Now when I go to open programs that worked perfectly well before I get start by side because incorrect.. has configuration its side to Application is failed this message quot The application has failed to start because Application has failed to start because its side by side configuration is incorrect.. it side-by-side configuration is incorrect Please see the application event log for more detail quot A few programs still open most do not The ones that don Application has failed to start because its side by side configuration is incorrect.. t all come up with Application has failed to start because its side by side configuration is incorrect.. this same msg These are the ones that don t open Adobe Photoshop Elements exe zoombrower Ex exe a canon photo editing program c Program Files Microsoft Works WksWP exe quot quot quot WksCal exe quot quot quot wksdb exe quot quot quot WksSb exe quot quot quot wksss exe Norton Security Program c Program Files Norton Engine uiStub exe Quicken WillMaker Plus c Program Files Quicken WillMaker Plus qwp exe Windows Live c Program Files Windows Live Mail wlmail exe quot quot quot Photo Gallery MovieMaker exe quot quot quot Photo Gallery WLXPhotogallery exe There are others but I think they don t open because the system restore program cannot complete a system restore and my shortcuts and program paths have been shuffled due to the incompleted system restore attempt This one really stands out as an important one to be looked at ehshell exe- net Framework Initialization Error quot C Windows Microsoft net Framework V could not be loaded Am I misguided in hoping that if I quot fix quot this ehshell command program everything else may fall into place I am dreadfully afraid of attempting anything with the registry as I am a complete novice but am willing to give it a try if someone has the patience to guide me Please if anyone can help I can t really go out on the internet too far or too wide as my Norton Anti-virus program is not working My surfing for help with this is limited to sites that quot seem quot trustworthy and that s not many now a days nbsp

https://forums.techguy.org/threads/application-has-failed-to-start-because-its-side-by-side-configuration-is-incorrect.932612/
Relevancy 92.02%

i hate vista. but I gotta work on them cause they break.
I have a laptop handed off that is "stuck" in terms of the way it displays the file system [Windows Explorer].
How do I get this thing to display the side-by-side hierarchical view? you know... computer, drives, top level on the left pane, and the drill-down in the right pane???????

aarrrrgggghhhhh
 

A:? Vista Windows Explorer in side-by-side panes like good OS's??!!

The tree view is to the bottom left of the file view, below the favorites.
 

https://forums.techguy.org/threads/vista-windows-explorer-in-side-by-side-panes-like-good-oss.923995/
Relevancy 92.02%

Suddenly out of the blue nothing opens - Am not a programmer and don't understand all this lingo have 4 0r 5 redistributible programs C++ 2005, 2008 etc with all relevant service packs - NO LUCK - this is killing me am looking for work and can't get to my resume can't open any programs at all - adobe, microsoft office NOTHING please tell me how to restore my system files to default and start over
 

https://forums.techguy.org/threads/side-by-side-configuration-error-vista-office-2010.995353/
Relevancy 92.02%

Ok so I am going to go straight into the good stuff Essentially I launch Dragon Age and get an error about side by side configuration I have already done an enormous amount of research on this subject and have found that the problem is usually attributed to the C Redistributable from Microsoft I tried to remedy this problem different ways manually working from a system restore point where Dragon Age Configuration Error 'easy' Side by fixes several Side (Attempted already) amp Bioshock did not work but Mass Effect Call of Duty MW and the Original Bioshock were still fully functional this system restore point had the Microsoft C Redistributable installed and Side by Side Configuration Error (Attempted several 'easy' fixes already) again the games I listed in parenthesis were working fine I first uninstalled the Redistributable and downloaded and installed the Redistributable restarted the computer even though it did not prompt me and ran into a massive error Essentially this install made every game unplayable all of those I listed above Next I uninstalled the Redistributable and reinstalled the without a restart and tried to launch every game listed above Of course I was back to square one with Dragon Age and Bioshock still giving me the side by side configuration error Lastly I tried launching each game through the program depends exe using the exe to see exactly which dependencies each game required Of course both Dragon Age and Bioshock gave me the side by side configuration telling me that a MSVCP dll file could not be found within my system A quick google search later let me know that this file was part of the C Redistributable package My drivers directX etc are all up to date I fixed these first and I m so frustrated right now as I am bouncing back between somewhat working and completely broken If any fix could be thrown out there that d be greatly appreciated and I will be checking back very often to try to work with you guys My question is simply Is there some type of conflict of compatibility between and or is there some way to have both installed on the computer at once I am running Vista Service Pack nbsp

A:Side by Side Configuration Error (Attempted several 'easy' fixes already)

This error is by no means fixed, however I thought that I would post in some detailed error information from my event viewer (please read the first post, however, as my problem is unique):

Activation context generation failed for "C:\Program Files\Dragon Age\bin_ship\daorigins.exe". Dependent Assembly Microsoft.VC80.CRT,processorArchitecture="x86",publicKeyToken="1fc8b3b9a1e18e3b",type="win32",version="8.0.50727.4053" could not be found. Please use sxstrace.exe for detailed diagnosis.

Activation context generation failed for "c:\program files\2k games\bioshock 2\sp\builds\binaries\BIOSHOCK2.EXE". Dependent Assembly Microsoft.VC80.CRT,processorArchitecture="x86",publicKeyToken="1fc8b3b9a1e18e3b",type="win32",version="8.0.50727.4053" could not be found. Please use sxstrace.exe for detailed diagnosis.
 

https://forums.techguy.org/threads/side-by-side-configuration-error-attempted-several-easy-fixes-already.905945/
Relevancy 92.02%

I downloaded and installed Ubuntu and sectioned off a part of my hard drive for it. I intended to have it set up to run both windows 7 and linux together and let me choose which boot disk I wanted to use at start up. Ubuntu took over and so I read through some forums online. I can now get to the Windows 7 loading screen but it freezes there. I have my install disc and was hoping someone could assist me with getting windows 7 back. I do not care if I loose Ubuntu. I am currently sitting with the Administrator: X:\windows\system32\cmd.exe from the System Recovery Options Menu with my Windows 7 Disc in the tray. Any assistance would be greatly appreciated (if i can save my HD great if not I can live with that).

Tavious

A:Unable to boot Windows after installing linux to run side by side

You'll need to boot System Recovery Options to run Startup Repair repeatedly.

Make sure the Win7 partition or its 100mb System Reserved partition (preferred) is marked Active first: Partition - Mark as Active (Method Two)

If this fails after three separate repair attempts with reboots using DVD or Repair CD, boot free Partition Wizard bootable CD to doublecheck which partition is set Active, then click on Win7 HD to highlight it, from Disk tab select Rebuild MBR, OK, Apply, reboot.

If Win7 doesn't start, boot DVD/Repair CD to run Startup Repair 3 times again.

If these fail, change the Active flag to Win7 partition if it is on SysReserved. Try Rebuild MBR and if necessary Startup Repairs again.

Linux can corrupt Win7 beyond repair so you may need to copy out your files using Win7 disk or Paragon Rescue CD: Copy & Paste - in Windows Recovery Console

Then run full Factory Recovery from its partition at boot, or using disks you've made or order, or use the Win7 Install DVD to clean reinstall following these steps: Reinstalling Windows 7

http://www.sevenforums.com/installation-setup/191827-unable-boot-windows-after-installing-linux-run-side-side.html
Relevancy 92.02%

I just came home from work and there was a power failiure while I was working. I turned my computer back on and went to open Google Chrome, but this message appeared...

"The application has failed to start because its side by side configuration is incorrect. Please see the application event log for more detail."

I have no clue what this means or what to do. I'm using safari at the moment and went on google and all the instructions look really confusing. I know VERY little about computers and the terms and what not. So any help would be greatly appreciated.

Thanks,

A:Help! Cant Open Google Chrome. Side by Side Configuration Is Incorrect.

If this "repair" does not work I would try a restore point if you have a recent one.

Message: The application has failed to start because its side-by-side configuration is incorrect. | Chief Architect Knowledge Base

Basically for Vista it is open Programs and Features from Control Panel, scroll to chrome and click Repair.

http://www.vistax64.com/browsers-mail/302603-help-cant-open-google-chrome-side-side-configuration-incorrect.html
Relevancy 92.02%

I have Vista. When someone sends me an Adobe document I can't open it. The error message says that my side by side configuration is inaccurate. If I save the document to my desktop, I can then open Adobe and open it from there but it is a hassle. Why can't I just open the document from the source?

A:Adobe Reader - side by side configuration is inaccurate error

Latest version of Acrobat? Tried uninstalling and re-installing to see if it fixes it?

Didn't do something silly like use a duplicate file utility or remove things from the WinSxS folder?

Better option, use Foxit instead,

Foxit Software - Foxit Reader for Windows

http://www.vistax64.com/software/222633-adobe-reader-side-side-configuration-inaccurate-error.html
Relevancy 92.02%

I have extensively searched these forums for a solution to my problem but can't find it I have found some similar problems but none exactly the same here is what happened I have a Windows computer running just fine I pulled the hard drive out of my old computer and had installed it in the new one and it seems fine I can access both drives and i all my files are there The problem i am having is that i can't open any files Installed 2nd configuration incorrect drive....side-by-side hard from my old hard drive if the program they need to open is also on that old hard drive For example my old Installed 2nd hard drive....side-by-side configuration incorrect hard drive has AutoCAD on it my new hard drive doesn't When i click on AutoCad i get the annoying quot The application Installed 2nd hard drive....side-by-side configuration incorrect has failed to start because its side-by-side configuration is incorrect quot message This happens with lots of programs not just AutoCAD I have MS Office on the old hard drive but when I try to open a word or excel file it won't open It's like the computer is trying to open files from my old hard drive with applications that are on my new drive This is a problem because i cant afford to buy copies of autoCAD and copies of MS Office and copies of every program i have I feel like there is a simple fix for this but i can't figure this one out Thank you for help

A:Installed 2nd hard drive....side-by-side configuration incorrect

Hi welcome to the forum.

to my knowledge you will need to reinstall the programs as you cant use programs that are installed on the hard drive from another computer as it will have writen registry items when the program was installed.

i'm sure someone will correct me if i am wrong.

http://www.sevenforums.com/hardware-devices/358307-installed-2nd-hard-drive-side-side-configuration-incorrect.html
Relevancy 92.02%

Hi, I'm hoping someone here can help me, I was referred to this forum by nasdaq in the malware removal forum to help with some residual problems I've been having with my hp notebook (http://www.bleepingcomputer.com/forums/t/498613/infected-with-virus-appplicunwntwin32adwareibryteh289567536/
).
 
The following error is popping up when I try to open certain programs on my computer: "The application failed to load because its side-by-side configuration is incorrect.  Please see the application event log or use the command-line sxstrace.exe tool for more detail."
 
I am able to access the sxstrace.exe tool but when I try to get the trace to run, I get an error message- "Access is denied" (see above post for screenshots, etc.).  At first I just noticed this happening with my Kindle for PC, but has now graduated to my Dropbox as well.
 
Any advice on what to do next?

A:Error Msg: This application failed to start because its side-by-side configurati

I am currently trying the steps listed here-
 
http://answers.microsoft.com/en-us/windows/forum/windows_7-pictures/this-application-failed-to-start-because-side-by/7673bf12-87c2-48ca-b5ae-b8aa85e295dc 
 
and will advise.
 
Also- I realize the sxstrace.exe tool may not have worked because I didn't access the cmd prompt in administrator mode which gives me a different prompt: Windows\system32.
 
Will try that as well.

http://www.bleepingcomputer.com/forums/t/499830/error-msg-this-application-failed-to-start-because-its-side-by-side-configurati/
Relevancy 92.02%

Windows -bit None of my to configuration start failed - side-by-side application has is incorrect the applications or programs work not even internet explorer sending this from another computer I ran HJT and this is what I got Logfile of Trend Micro HijackThis v Scan saved at AM on Platform Windows WinNT MSIE Internet Explorer v Boot mode Normal Running processes C Program Files x TOSHIBA ConfigFree NDSTray exe C Program Files x TOSHIBA ConfigFree CFSwMgr exe C Users Aja Documents HijackThis exe R - HKCU Software Microsoft Internet Explorer Main Search Page http go microsoft com fwlink LinkId R - HKCU Software Microsoft Internet Explorer Main Start Page http msn com R - HKLM Software Microsoft Internet Explorer Main Default Search URL http go microsoft com fwlink LinkId R - HKLM Software Microsoft Internet Explorer Main Search Page http go microsoft com fwlink LinkId R - HKLM Software Microsoft Internet Explorer the application has failed to start - side-by-side configuration is incorrect Search SearchAssistant R the application has failed to start - side-by-side configuration is incorrect - HKLM Software Microsoft Internet Explorer Search CustomizeSearch R - HKLM Software Microsoft Internet Explorer Main Local Page C Windows SysWOW blank htm R - HKCU Software Microsoft Internet Explorer Toolbar LinksFolderName R - URLSearchHook Zynga Toolbar - b ec e- a- the application has failed to start - side-by-side configuration is incorrect b -b cb- b - C Program Files x Zynga tbZyn dll O - BHO AcroIEHelperStub - DF C-E AD- -A -FA C EBDC - C Program Files x Common Files Adobe Acrobat ActiveX AcroIEHelperShim dll O - BHO no name - C C A-E - b - D - CECB - no file O - BHO Zynga Toolbar - b ec e- a- b -b cb- b - C Program Files x Zynga tbZyn dll O - BHO Windows Live ID Sign-in Helper - D - C - ABF- ECC- C - C Program Files x Common Files Microsoft Shared Windows Live WindowsLiveLogin dll O - BHO Java tm Plug-In SSV Helper - DBC -A - b-BC - C C C A - C Program Files x Java jre bin jp ssv dll O - Toolbar Zynga Toolbar - b ec e- a- b -b cb- b - C Program Files x Zynga tbZyn dll O - DEFAULT User Startup Best Buy Software Installer lnk C Program Files Best Buy Software Installer Best Buy Software Installer exe User Default user O - Extra context menu item E amp xport to Microsoft Excel - res C PROGRA MIF BA Office EXCEL EXE O - Extra context menu item Google Sidewiki - res C Program Files x Google Google Toolbar Component GoogleToolbarDynamic mui en D FF C D BF dll cmsidewiki html O - Extra button Blog This - C - CB - a-A C -D FCDDC D - C Program Files x Windows Live Writer WriterBrowserExtension dll O - Extra Tools menuitem amp Blog This in Windows Live Writer - C - CB - a-A C - br D FCDDC D - C Program Files x Windows Live Writer WriterBrowserExtension dll O - Extra button Send to OneNote - A- - f c- - EE C C - C PROGRA MIF BA Office ONBttnIE dll O - Extra Tools menuitem S amp end to OneNote - A- - f c- - EE C C - C PROGRA MIF BA Office ONBttnIE dll O - Extra button Research - B - CC- C -B BE- C C A - C PROGRA MIF BA Office REFIEBAR DLL O - Unknown file in Winsock LSP c program files x common files microsoft shared windows live wlidnsp dll O - Unknown file in Winsock LSP c program files x common files microsoft shared windows live wlidnsp dll O - DPF E E F- F- FB - -AC BF A - http platformdl adobe com NOS getPlusPlus gp cab O - Service SystemRoot system Alg exe - ALG - Unknown owner - C windows System alg exe file missing O - Service SystemRoot system efssvc dll - EFS - Unknown owner - C windows System lsass exe file missing O - Service systemroot system fxsresm dll - Fax - Unknown owner - C windows system fxssvc exe file missing O - Service keyiso dll - KeyIso - Unknown owner - C windows system lsass exe file missing O - Service comres dll - MSDTC - Unknown owner - C windows System msdtc exe file missing O - Service SystemRoot System netlogon dll - Netlogon - Unknown owner - C windows system lsass exe file missing O - Service systemroot sys... Read more

https://forums.techguy.org/threads/the-application-has-failed-to-start-side-by-side-configuration-is-incorrect.1000341/
Relevancy 92.02%

My friends computer is displaying the message: "the application has failed to start because its side-by-side configuration is incorrect. please see the application log for more detail.", when trying to open Microsoft office and Windows live messenger.

Obviously the programs do not open.
How do we solve this?

Thanks, Joe.

A:the application has failed to start because its side-by-side configuration is incorre

I have seen this before. Do you have AVG installed? AVG and the C++ redistributable seem to conflict. Uninstalling and reinstalling both fixed it.

http://www.techsupportforum.com/forums/f217/the-application-has-failed-to-start-because-its-side-by-side-configuration-is-incorre-560333.html
Relevancy 92.02%

Hey Bunch of etc. errors - version configuration, by compatibility, side side Guys I have a problem Last night i was up all night using Bunch of errors - side by side configuration, version compatibility, etc. my pc I had quite a few tabs open using chrome and every once in a while the cpu had a lot Bunch of errors - side by side configuration, version compatibility, etc. of Work to do so the pc would respond more slow During one of these slows something different happened Quite a lot of icons just turned into one of the old school Windows icons most if not all of them being exe files I wanted to fix all of this so I used Bullguard and after that i wanted to use CCleaner CCleaner didn't Work Neither did the other programs They gave me an error in the lines of This version of this file is not compatible with the version of Windows you're running Check your computer's system information to see whether you need an x -bit or x -bit verion of the program Also whenever i shut down my computer or boot it up an error pops up from LogonUI exe Error C program files common files microsoft shared windows live wlidcredprov dll is either not designed to run on windows or it contains an error I figured out how to fix this part I simply installed Windows Live Essentials And when I open Google Chrome it just gives me another error It says that the side by side configuration is incorrect I tried uninstalling MyWinlocker but it is still running in the system tray I tried looking for a process called mwl exe but I can't find it Also whenever the computer boots up I am also greeted with a certain window It's the window that asks what program i want to use for opening a certain file The file is called Andreas and my user profile is called Andreas Gade so I think my user profile might be corrupted Thanks in advance Andreas

A:Bunch of errors - side by side configuration, version compatibility, etc.

Please run System File Checker
 
The sfc /scannow command scans all protected system files and replaces corrupted and incorrect versions with correct Microsoft versions.
 
Click on the Start orb and then type cmd in the Search programs and files box.
 
In the pane above the search box Programs will appear with cmd below it, right click on cmd and choose Run as administrator.
 
If you are prompted for an administrator password or for a confirmation, enter the password, or click Allow.
 
This will open the Elevated Command Prompt, it will look similar to the image below.
 

 
Type in sfc /scannow and then press Enter to start the scan.  Please notice the space between sfc and the /scannow.
 
If the scan finds no integrity  problems the scan will stop.  Type in exit, then press Enter to stop the scan.
 
When the scan is finished please post the log of this scan.
 
To find sfc /scannow log, type cmd in the Search programs and files box. 
 
cmd will appear above the search box under Apps., right click on it and choose Run as administrator, this will open the Elevated Command Prompt.  This will look simlar to the image above.
 
Copy and paste the following in the Elevated Command Prompt, then press Enter.  
 
findstr /c:"[SR]" %windir%\logs\cbs\cbs.log >%userprofile%\Desktop\sfcdetails.txt
 
This will place a new icon on the desktop titled sfcdetails.  Double click on this icon to open the log, copy the log and paste it in your topic. 

http://www.bleepingcomputer.com/forums/t/575574/bunch-of-errors-side-by-side-configuration-version-compatibility-etc/
Relevancy 92.02%

How can I open 2 excel files side by side in Office 2010?

A:How to open 2 excel files side by side in Office 2010?

See if this helps: Comparing Two Excel 2010 Worksheets Side by Side - For Dummies

http://www.sevenforums.com/microsoft-office/193878-how-open-2-excel-files-side-side-office-2010-a.html
Relevancy 92.02%

Hi there,

So in XP one was able to select open windows from the taskbar via holding CTRL and left clicking on each one, then right clicking and tile / arrange vertically the selected windows...

In windows 7 I cant seem to do it automatically. Yes i can do it manually with three or more windows, but i shouldnt have to.

I cant get three or more windows to tile next to each other, i can only get two windows to go side by side via the snap feature.

Any ideas on how to get three or more windows side by side semi-automatically?

Thanks for reading.
 

A:Window snap - How to get three or more windows arranged vertically side by side?

https://forums.techguy.org/threads/window-snap-how-to-get-three-or-more-windows-arranged-vertically-side-by-side.899043/
Relevancy 92.02%

So my issue is that when I log into Monitor side under over side resets environment setup not Multi to by my computer it will some times not all the time revert from a side by side multi monitor setup to a over under setup Like if you go into screen resolution settings I will have it set to monitor on Multi Monitor environment resets to over under setup not side by side the left and monitor on the right then when I Multi Monitor environment resets to over under setup not side by side lock the computer and then log back in it will have monitor positioned over the top of monitor nbsp I'm thinking there is possibly a default that it keeps going back to but I'm not sure where I would look for that other than the screen resolution settings Another possibility for the origin of this problem could be Microsoft User Experience Virtualization Agent which we have installed on all our computers here to synchronize the various setting we have connected to our profiles It looks like UEV might synchronize monitor layout settings and with that it could be some how defaulting on an over under set up Overall I am unsure of what to do about his nbsp

https://social.technet.microsoft.com/Forums/en-US/4290bed6-9fe9-4bad-bdd1-90bcb1179fa8/multi-monitor-environment-resets-to-over-under-setup-not-side-by-side?forum=w7itproui
Relevancy 92.02%

Hello I am usually the person people go to when they have computer issues but I am not by any means formally educated in any IT field or even familiar with C bin dll files etc but including config Side Side error by Multiple issues I am pretty good at figuring out resolutions to fairly complex computer situations both hardware and software related Unfortunatly I am having Multiple issues including Side by Side config error quite a few problems with my new Vista laptop that I cannot resolve after trying every suggestion seen online It seems to have started with Adobe I installed adobe reader and since then all my Multiple issues including Side by Side config error office programs adobe most Multiple issues including Side by Side config error other applications do not open The error is a side by side config error Heres are some examples in event log Activation context generation failed for quot C Program Files x Common Files Symantec Shared coShared Browser CoIEPlg dll quot Error in manifest or policy file quot C Windows WinSxS manifests x policy microsoft vc crt fc b b a e e b none e c b f c f manifest quot on line The policy contains a lt noInherit gt tag but only manifests may have these Activation context generation failed for quot C Windows Microsoft NET Framework v fusion dll quot Error in manifest or policy file quot C Windows WinSxS manifests x policy microsoft vc crt fc b b a e e b none e c b f c f manifest quot on line The policy contains a lt noInherit gt tag but only manifests may have these Activation context generation failed for quot C Program Files x Microsoft Office Office EXCEL EXE Manifest quot Error in manifest or policy file quot C Windows WinSxS manifests x policy microsoft vc crt fc b b a e e b none e c b f c f manifest quot on line The policy contains a lt noInherit gt tag but only manifests may have these I have uninstalled and reinstalled every program NET framework all C files in the programs list to no avail Also I cant recreate it but mscorwks dll seems to be corrupted or missing On occasion instead of the side by side error I get this if I run the program from a different location These could all be related but that is not the end of it I cannot install SP for vista It failed over times Error code I have tried manually same error Tried from a disk same error The updater actually just downloads to and sends the error code I dont know if this is related to the side by side errors but somewhere something is corrupted im assuming I cannot install directx I tried to run a game and when I did it tried to auto-install directx It failed citing error Now i am missing dxdx dll and cannot run any programs games that require directx I have tried to uninstall but obviously I cannot I tried every compatible version of directx Please help I am at a total loss I am pretty sure it is all related so hopefully someone has seen this and it is a quick fix Also there are no restore points that dont give me these errors Including the directx one Microsoft has no answers and I have searched every inch of the web and all three problems seem to go mostly unresolved and remain open I dont have another computer nor can I afford one I have to make this one work

A:Multiple issues including Side by Side config error

A quick update...

After going back to the log files to see when the errors exactly started i came across over 500 errors in a single day. They were caused by Symantec. Literally 50 a second for ten minutes these errors were logged, i paged through them and it took me forever.

Activation context generation failed for "C:\Program Files (x86)\Common Files\Symantec Shared\coShared\Browser\2.0\CoIEPlg.dll".Error in manifest or policy file "C:\Windows\WinSxS\manifests\x86_policy.8.0.microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.3053_none_516e2c7b0f48c07f.manifest" on line 3. The policy contains a <noInherit> tag, but only manifests may have these.

More error logs that may be usefull

Activation context generation failed for "C:\Program Files (x86)\ATI Technologies\ATI.ACE\Graphics-Full-Existing\MMLoadDrv.exe".Error in manifest or policy file "C:\Windows\WinSxS\manifests\x86_policy.8.0.microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.3053_none_516e2c7b0f48c07f.manifest" on line 3. The policy contains a <noInherit> tag, but only manifests may have these.

Activation context generation failed for "C:\Windows\SysWOW64\sirenacm.dll".Error in manifest or policy file "C:\Windows\WinSxS\manifests\x86_policy.8.0.microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.3053_none_516e2c7b0f48c07f.manifest" on line 3. The policy contains a <noInherit> tag, but only manifests may have these.


I finally found the first error date... here is the event log for immediatly before the errors began

The EventSystem sub system is suppressing duplicate event log entries for a duration of 86400 seconds. The suppression timeout can be controlled by a REG_DWORD value named SuppressDuplicateDuration under the following registry key: HKLM\Software\Microsoft\EventSystem\EventLog

http://www.techsupportforum.com/forums/f217/multiple-issues-including-side-by-side-config-error-408781.html
Relevancy 92.02%

"The application has failed to start because its side-by-side configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe tool for more detail."

First of all, I've gotten this on at least 3 different programs. Everyone who's written about this seems to think it's related to their specific program...it's not! Secondly, what I find here in the forum on the subject tells me there has been no solution...also am unable to find any on the 'net'. I think it acts like a virus and is spreading...

What's up with this??? Does anyone know...? It has kept me from opening iTunes so I can't work with my iPad anymore. Certainly there must be someone knowledgeable enough to know what this is and what to do about it...right?:

 

https://forums.techguy.org/threads/the-application-has-failed-to-start-because-its-side-by-side-configuration-is-incorre.1009325/
Relevancy 92.02%
A:What free photo viewer will allow me to view with two or more pictures side-by-side?

Chasys Draw IES allows working with layers and WildBit Viewer can compare photos side to side.

http://www.vistax64.com/software/291993-what-free-photo-viewer-will-allow-me-view-two-more-pictures-side-side.html
Relevancy 92.02%

On quite a few different programs i m getting the error message quot The application has failed to start because its side by side configuration is incorrect Please see the application event log or use the command line sxstrace exe tool for more detail quot I ve read so many forums online where people have had a similar issue but nothing has been helpful The most common suggestion is related to VisualC but when i installed it I multiple is error incorrect programs? on side-by-side configuration got side-by-side configuration is incorrect error on multiple programs? the same error I tried running it without saving then I saved it and tried running it again the same error I ve opened the event viewer theres quite a few sidebyside error messages but I dont side-by-side configuration is incorrect error on multiple programs? know what to do with any of that information The first side by side error is this one Microsoft Windows Common-Controls language quot amp x a quot processorArchitecture quot X quot publicKeyToken quot b ccf df quot type quot win quot version quot quot C Program Files x Microsoft Silverlight Silverlight Configuration exe I havn t a clue how it started my computer was fine yesterday I opened it today to these errors I tried rebooting but it didnt help If any more information is needed I ll provide what I can Thanks

A:side-by-side configuration is incorrect error on multiple programs?

Follow the instructions here http://support.microsoft.com/kb/929135 to install VisualC++

http://www.bleepingcomputer.com/forums/t/338101/side-by-side-configuration-is-incorrect-error-on-multiple-programs/
Relevancy 92.02%

Windows on Toshiba Laptop all of the recent windows updates have been installed I was having issues running the new zynga game on facebook the ville I assumed The because has failed side the application by side start configuration is Error: to that it was a resource hog and didn t like the laptop and it was possible that I didn t have the most recent installment of Adobe flash so I upgraded that as well It still wouldn t run So I decided to clean up the hard drive I used control panel to uninstall a game that the kids Error: The application has failed to start because the side by side configuration is no longer play because it s now obsolete I also uninstalled Quickbooks it wasn t just quickbooks it was a bunch of crapware that was installed on the laptop when we purchased it but since we don t use quickbook I figured we could get rid of it the only reason I bother stating all of this is because I believe in full disclosure You never know which action caused the issue so it s best to tell it all Sorry for the ramble I have been noticing that the machine was running slower lately so that is why I decided to de-clutter the hard drive After doing this and rebooting I found that I was unable to run Rockmelt it came up with the following Error The application has failed to start because the side by side configuration is incorrect please see the application event log or use the command line sxstrace exe tool for more detail I consider myself a fair pc tech so I have been troubleshooting this for most of the day by searching it out on the internet for the most part I have been told to update the C redist I have made an attempt I downloaded said files on another machine and burned to cd and attempted to install on the machine in question however any program that I attempt to run I get the side by side error message I have been told by my machine that Internet Explorer is not installed and asked if I wanted to remove the shortcut icon Basically my computer will boot up I can log into it and it brings up windows but I cannot do anything on the machine Please assist if possible I have also used the sxstrace program and I have a parsed filed I can attach if needed Thanks so much

http://www.techsupportforum.com/forums/f217/error-the-application-has-failed-to-start-because-the-side-by-side-configuration-is-656365.html
Relevancy 92.02%

So my issue is that when I log into my computer it will some times not all the time revert from a side by side multi monitor setup to a over under setup Like if you go into screen resolution settings I will have it set to monitor on the left and monitor on the right then when I lock the computer and then log back in it will have monitor positioned over the top of monitor I'm thinking there is possibly a default that it keeps going back to but I'm not sure where I would look for that other than the screen resolution settings Another possibility for the origin of this problem could be Microsoft User Experience Virtualization Agent which we have installed on all our computers here to synchronize the various setting we have connected to our profiles It looks like UEV might synchronize monitor layout settings and with that it could be some how defaulting on an over under set up Overall I am unsure of what to do about his Any one Monitor by to over resets side under side environment Multi setup not have any ideas

http://www.sevenforums.com/hardware-devices/386366-multi-monitor-environment-resets-over-under-setup-not-side-side.html
Relevancy 92.02%

I can't install or uninstall any software.
Most of the installed software are not working.
The default windows apps are working and few of the installed games are working (Witcher 3 - don't know how) .
Tried to reinstall Visual C++ Redistro but not working as none of exe files are opening with side by side config issue.

A:Side by side configuration issue since Windows 10 Update on 09 Aug 2016

Originally Posted by Windows Central Question I can't install or uninstall any software.
Most of the installed software are not working.
The default windows apps are working and few of the installed games are working (Witcher 3 - don't know how) .
Tried to reinstall Visual C++ Redistro but not working as none of exe files are opening with side by side config issue. can you perform a sfc scan?
And check that there aren't any pending OS updates and app updates
If you need additional help or have more questions or details to share, please join the site so you can reply in this thread. See this link for instructions on how to join Windows Central.

http://forums.windowscentral.com/ask-question/438113-side-side-configuration-issue-since-windows-10-update-09-aug-2016-a.html
Relevancy 91.16%

hope i'm posting in the correct place.

right side of screen is fading into right side of computer monitor, can't seem to expand.
it's about an inch on the left side and an inch on the top that show the background of the start up screen.

tia for your help.

http://www.techsupportforum.com/forums/f10/right-side-of-screen-is-fading-into-right-side-of-computer-monitor-433340.html
Relevancy 91.16%

Hello,

I've really been having a lot of trouble with .exe files downloaded from the internet (i.e. program installers and the like). When trying to run any .exe installer an error message comes up that says:






Quote:
The application has failed to start because its side-by-side configuration is incorrect. Please see the application log or use the command-line sxstrace.exe tool for more detail


This seems to happen with ALL downloaded .exe installers (including Firefox installer, GameStop's app installer, game demo installers, etc).

I'm really stuck for what to do. Any help would be greatly appreciated.

P.S. Also, I cannot read any PDF files in Chrome or Firefox (says "Object label badly formatted"). Any help with this would be appreciated also (Cannot download new version of Adobe Reader anyway).

A:Downloaded .exe files - side-by-side configuration incorrect

One possible fix: Prevent "The application has failed to start because its side-by-side configuration is incorrect..." error starting Access

http://www.sevenforums.com/general-discussion/264484-downloaded-exe-files-side-side-configuration-incorrect.html
Relevancy 91.16%

Hi

"My Outlook 2007 has just developed a strange error, as follows...

C:\Program Files\Microsoft Office\Office12\OUTLOOK.EXE

The applicationhas failed to start because its side-by-side configuration is incorrect. Please see the application event log for more details".


Ive been into the event viewer, as directed by other forums, and this message is displayed.

Activation context generation failed for "C:\Program Files\Microsoft Office\Office12\OUTLOOK.EXE.Manifest".Error in manifest or policy file "C:\Program Files\Microsoft Office\Office12\OUTLOOK.EXE.Manifest" on line 0. Invalid Xml

I am not very tech minded, although can generally follow instructions.

Does anybody know if this is something I can fix and how to go about it? Or do I need 'external' help.

Thanks

A:Outlook showing incorrect side-side configuration

Hi & welcome.

Have you set specific "Save folders for stored messages" created in Outlook on your computer? As these will be lost if you un-install Outlook!

On saying that my first thought & I think the easiest solution would be to un-install it & re-install it.

Please note the comment above about loosing stored folders & messages.

If in doubt, ASK. OK?

http://www.vistax64.com/browsers-mail/290088-outlook-showing-incorrect-side-side-configuration.html
Relevancy 91.16%

quot The application has failed to start because its side-by-side configuration is incorrect Please see the application event log or use the command-line sxstrace exe tool for more detail quot First of all I ve gotten this on at least different programs Everyone who s written about this seems to think it s related to their specific program it s not Secondly what I find here in the forum on the subject tells me there has been no solution also am unable to find any on the net I think it acts like a virus and is spreading What s up with this Does anyone know It failed configuration... its side-by-side The has start because application to has kept me from opening iTunes so I can t work with my iPad anymore Certainly there must be someone knowledgeable enough to know what this is and what to do about it right Tech Support Guy System Info Utility version The application has failed to start because its side-by-side configuration... OS Version Microsoft Windows Ultimate Service Pack The application has failed to start because its side-by-side configuration... bit Processor Intel R Core TM CPU T GHz x Family Model Stepping Processor Count RAM Mb Graphics Card NVIDIA GeForce Go Mb Hard Drives C Total - MB Free - MB D Total - MB Free - MB F Total - MB Free - MB G Total - MB Free - MB M Total - MB Free - MB Motherboard Quanta BD None Antivirus Microsoft Security Essentials Updated and Enabled nbsp

A:The application has failed to start because its side-by-side configuration...

You probably need Visual Studio C++ 2005 or 2008 Redistributable runtime files installing to fix this error:
http://www.microsoft.com/download/en/details.aspx?id=29
http://www.microsoft.com/download/en/details.aspx?id=3387
 

https://forums.techguy.org/threads/the-application-has-failed-to-start-because-its-side-by-side-configuration.1009331/
Relevancy 91.16%

I recieve this error for has to its configuration side-by-side Application start because failed every program that i try to open Tryed to uninstall vc and vc same problem quot application has failed to start because its side-by-side configuration is incorrect Please see the application event log or use the command-line sxstrace exe tool for more detail Code CBS Starting TrustedInstaller initialization - - Info CBS Loaded Servicing Stack v with Core C Windows winsxs amd microsoft-windows-servicingstack bf ad e none f dde d f cbscore dll - - Info CSI WcpInitialize wcp dll version called stack x fee ce d x fee d x fee d d xff e c xff d xff daff - - Info CSI WcpInitialize wcp dll version called stack x fee ce d x fee de x fee db a c x fee d a xff e c xff d - - Info CSI WcpInitialize wcp dll version called stack x fee ce d x fef x fef xff e xff d ae xff daff - - Info CBS Ending TrustedInstaller initialization - - Info CBS Starting the TrustedInstaller main loop - - Info CBS TrustedInstaller service starts successfully - - Info CBS SQM Initializing online with Windows opt-in False - - Info CBS SQM Cleaning up report files Application has failed to start because its side-by-side configuration older than days - - Info CBS SQM Requesting upload of all unsent reports - - Info CBS SQM Failed to start upload with file pattern C Windows servicing sqm std sqm flags x HRESULT x - E FAIL - - Info CBS SQM Failed to start standard sample upload HRESULT x - E FAIL - - Info CBS SQM Queued file s for upload with pattern C Windows servicing sqm all sqm flags x - - Info CBS SQM Warning Failed to upload all unsent reports HRESULT x - E FAIL - - Info CBS No startup processing required TrustedInstaller service was not set as autostart or else a reboot is still pending - - Info CBS NonStart Checking to ensure startup processing was not required - - Info CSI IAdvancedInstallerAwareStore ResolvePendingTransactions call flags progress NULL phase pdwDisposition x faa - - Info CSI Creating NT transaction seq objectname quot null quot - - Info CSI Created NT transaction seq result x handle x fc - - Info CSI CSI perf trace CSIPERF TXCOMMIT - - Info CBS NonStart Success startup processing not required as expected - - Info CBS Startup processing thread terminated normally - - Info CSI CSI Store x e ac initialized - - Info CBS Session initialized by client WindowsUpdateAgent - - Info CBS Failed to internally open package HRESULT x f - CBS E INVALID PACKAGE - - Info CBS Session initialized by client WindowsUpdateAgent - - Info CBS Archived backup log C Windows Logs CBS CbsPersist cab - - Info CBS Session initialized by client WindowsUpdateAgent - - Info CBS Read out cached package applicability for package Package for KB bf ad e amd ApplicableState CurrentState - - Info CBS Session initialized by client WindowsUpdateAgent - - Info CBS Read out cached package applicability for package Package for KB bf ad e amd ApplicableState CurrentState - - Info CBS Session initialized by client WindowsUpdateAgent - - Info CBS Read out cached package applicability for package Package for KB bf ad e amd ApplicableState CurrentState - - Info CBS Session initialized by client WindowsUpdateAgent - - Info CBS Read out cached package applicability for package Package for KB bf ad e amd ApplicableState CurrentState - - Info CBS Session initialized by client WindowsUpdateAgent - - Info CBS Read out cached package applicability for package Package for KB bf ad e amd ApplicableState CurrentState - - Info CBS Session initialized by client WindowsUpdateAgent - - Info CBS Read out cached package applicability for package Package for KB bf ad e amd ApplicableState CurrentState - - Info CBS Session initialized by client WindowsUpdateAgent - - Info CBS Read out cached package applicability for package Package for KB bf ad e amd ApplicableState CurrentState - - Info CBS Session initialized by client WindowsUpdateAgent - - Info CBS Read out cached package applicability for package Package for KB ... Read more

A:Application has failed to start because its side-by-side configuration

I had the same problem, some file got corrupt but cant remember what ones. i had to go for a fresh install of the app!

this may help you!

Resolving Side-by-Side Configuration errors (Windows Vista/7)

http://www.sevenforums.com/bsod-help-support/132515-application-has-failed-start-because-its-side-side-configuration.html
Relevancy 91.16%

Hey guys im having a problem with Windows Live Messenger.

Activation context generation failed for "C:\Program Files\Windows Live\Messenger\msnmsgr.exe".Error in manifest or policy file "" on line . A component version required by the application conflicts with another component version already active. Conflicting components are:. Component 1: C:\Windows\WinSxS\manifests\x86_microsoft.vc90.crt_1fc8b3b9a1e18e3b_9.0.30729.4148_none_5090ab56bcba71c2.manifest. Component 2: C:\Windows\WinSxS\manifests\x86_microsoft.vc90.crt_1fc8b3b9a1e18e3b_9.0.30729.1_none_e163563597edeada.manifest.

This is what is displayed in my Event Viewer and i have no idea to fix it. Any help would be greately appreciated.

Andrew

A:Windows Live Side-by-Side Configuration Error

Hello Andrew!

Welcome to the Vista Forums! I hope you enjoy your time here! Thanks for creating a new thread!

This error isn't the easiest to fix, but it also shouldn't be impossible.

Basically, although Windows can store two different version of a component, it cannot actually run two different versions at the same time.

The main available versions for that component are:


Code:
file:///C:/Windows/winsxs/Manifests/x86_microsoft.vc90.crt_1fc8b3b9a1e18e3b_9.0.21022.8_none_bcb86ed6ac711f91.manifest

file:///C:/Windows/winsxs/Manifests/x86_microsoft.vc90.crt_1fc8b3b9a1e18e3b_9.0.30729.1_none_e163563597edeada.manifest

file:///C:/Windows/winsxs/Manifests/x86_microsoft.vc90.crt_1fc8b3b9a1e18e3b_9.0.30729.4148_none_5090ab56bcba71c2.manifest

file:///C:/Windows/winsxs/Manifests/x86_microsoft.vc90.crt_1fc8b3b9a1e18e3b_9.0.30729.4974_none_50940634bcb759cb.manifest
As you can see, neither of the conflicting components is using the very latest file version. Now, what to do about it!

Windows Live is a Microsoft product. It is unusual for a Microsoft Product to have this sort of old file versioning issue, as long as it is up to date.

Can you please download a new copy of Windows Live Messenger from here: Windows Live Messenger 2011 - Instant messaging (IM), video chat

and install all of your Windows Updates.

If this doesn't fix it, we can look at more technical fixes, but hopefully we won't have to go there.

Thanks again, and the very best of luck,

Richard

http://www.vistax64.com/software/288157-windows-live-side-side-configuration-error.html
Relevancy 91.16%

Hi,
My Logitech wireless mouse and keyboard worked fine on Vista 64 Premium. Since upgrading to Vista 64 Ultimate, I get side-by-side configuration errors. I've uninstalled Setpoint, downloaded newer versions, reinstalled, installed the C++ Redistributable Package, but nothing eliminates the error. Has anyone had any success in resolving this problem?

A:Ultimate 64 Setpoint side by side configuration error

Hi newcitysue

Click the link in my sig and under step 2 download and install everything there, then reboot

http://www.vistax64.com/software/226283-ultimate-64-setpoint-side-side-configuration-error.html
Relevancy 91.16%

Hello all Im sorry in advance if this is the wrong forum to post but i think this problem has nothing to do with my windows version Im running windows pro bit updated from win pro leggal install Laptop is hp elitebook w All started with a sudden restart exe configuration files Side-By-side Win8: run cant incorrect / this happens usually due to some overheating problems of my laptop Anyway im used to it When pc restarted i tried to run chrome It poped up an error msg like the one in img Thought its something with chrome After that i tried opera Win8: Side-By-side configuration incorrect / cant run exe files same thing happened Problem is this happens for ALL exe files i cannot even start from control panel quot Uninstall a program quot or regedit Only some apps run like paint task manager disk management Win8: Side-By-side configuration incorrect / cant run exe files and some of win useless apps like maps I cannot enter safe mode either its shift f right Really dunno what to do my hands are tight Just a note i have loads of programs install mainly proffesional ones like microsoft c and ms sql server Any help would be usefull p s sorry for my english Thanks in advance

A:Win8: Side-By-side configuration incorrect / cant run exe files

Almost found a solution. Followed the guide here.
I repaired several times and did windows update. At the start i had several errors but now i'm stuck with those here:

Code:
2012-12-12 10:04:18, Info CSI 000003e1 [SR] Beginning Verify and Repair transaction
2012-12-12 10:04:20, Info CSI 000003e4 [SR] Cannot verify component files for Microsoft.VC80.CRT, Version = 8.0.50727.6910, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope neutral, PublicKeyToken = {l:8 b:1fc8b3b9a1e18e3b}, Type = [l:10{5}]"win32", TypeName neutral, PublicKey neutral, manifest is damaged (TRUE)
2012-12-12 10:05:42, Info CSI 00000446 [SR] Beginning Verify and Repair transaction
2012-12-12 10:05:47, Info CSI 00000449 [SR] Cannot verify component files for policy.8.0.Microsoft.VC80.CRT, Version = 8.0.50727.6910, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope neutral, PublicKeyToken = {l:8 b:1fc8b3b9a1e18e3b}, Type = [l:24{12}]"win32-policy", TypeName neutral, PublicKey neutral, manifest is damaged (TRUE)
2012-12-12 10:05:47, Info CSI 0000044c [SR] Cannot verify component files for policy.9.0.Microsoft.VC90.CRT, Version = 9.0.30729.6871, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope neutral, PublicKeyToken = {l:8 b:1fc8b3b9a1e18e3b}, Type = [l:24{12}]"win32-policy", TypeName neutral, PublicKey neutral, manifest is damaged (TRUE)
2012-12-12 10:12:29, Info CSI 0000073d [SR] Verifying 100 (0x0000000000000064) components
2012-12-12 10:12:29, Info CSI 0000073e [SR] Beginning Verify and Repair transaction
2012-12-12 10:12:30, Info CSI 00000741 [SR] Cannot verify component files for Microsoft.VC90.CRT, Version = 9.0.30729.6871, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope neutral, PublicKeyToken = {l:8 b:1fc8b3b9a1e18e3b}, Type = [l:10{5}]"win32", TypeName neutral, PublicKey neutral, manifest is damaged (TRUE)
2012-12-12 10:13:05, Info CSI 00000757 [SR] Verifying 100 (0x0000000000000064) components
2012-12-12 10:13:05, Info CSI 00000758 [SR] Beginning Verify and Repair transaction
2012-12-12 10:13:06, Info CSI 0000075b [SR] Cannot verify component files for policy.8.0.Microsoft.VC80.CRT, Version = 8.0.50727.6910, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope neutral, PublicKeyToken = {l:8 b:1fc8b3b9a1e18e3b}, Type = [l:24{12}]"win32-policy", TypeName neutral, PublicKey neutral, manifest is damaged (TRUE)
2012-12-12 10:13:06, Info CSI 0000075e [SR] Cannot verify component files for policy.9.0.Microsoft.VC90.CRT, Version = 9.0.30729.6871, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope neutral, PublicKeyToken = {l:8 b:1fc8b3b9a1e18e3b}, Type = [l:24{12}]"win32-policy", TypeName neutral, PublicKey neutral, manifest is damaged (TRUE)
2012-12-12 10:13:13, Info CSI 0000076c [SR] Beginning Verify and Repair transaction
2012-12-12 10:13:13, Info CSI 0000076f [SR] Cannot verify component files for Microsoft.VC80.CRT, Version = 8.0.50727.6910, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope neutral, PublicKeyToken = {l:8 b:1fc8b3b9a1e18e3b}, Type = [l:10{5}]"win32", TypeName neutral, PublicKey neutral, manifest is damaged (TRUE)
2012-12-12 10:13:13, Info CSI 00000772 [SR] Cannot verify component files for policy.9.0.Microsoft.VC90.CRT, Version = 9.0.30729.6871, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope neutral, PublicKeyToken = {l:8 b:1fc8b3b9a1e18e3b}, Type = [l:24{12}]"win32-policy", TypeName neutral, PublicKey neutral, manifest is damaged (TRUE)
2012-12-12 10:13:13, Info CSI 00000775 [SR] Cannot ve... Read more

http://www.sevenforums.com/software/268610-win8-side-side-configuration-incorrect-cant-run-exe-files.html
Relevancy 91.16%

Win 7 64 bit SP1. Attempting to install m-audio 2496 driver version 6_0_8 using an exe file. I was told to do this by m-audio support to try to overcome some problems with clicks and crackles in the card.

But when I try to run the installer, I get the message that the application has failed to start because its side by side configuration is incorrect.

Support told me to try to install the drivers manually using the device manager (!) but as I pointed out to them that does not work because ....the drivers are tied up in the exe file.....however....

Then it was suggested that I install C++ 2008 redist. That did not work.

So what is causing this side by side error?

It's nearly two weeks now since I started to ask them for help, so I am a little desperate. Any help would be appreciated.

Nick

A:[SOLVED] Driver won't install 'side by side' error

Ask the tech support personel if the driver is for a 64bit version of Windows. If it is not as him or her if they have 32bit drivers.

http://www.techsupportforum.com/forums/f217/solved-driver-wont-install-side-by-side-error-689364.html
Relevancy 91.16%

Hello I recently attempted to clean my system of some malware and thought I was successful When I was doing a Nvidia driver update the installer kept failing I addressed that as a unrelated issue and tried every possible permutation of solution driver sweeper safe mode installs etc etc When I took a look at my Windows Events I notice failed events related to the Nvidia installations Details Microsoft VC CRT processorArchitecture amd publicKeyToken fc b b a e e b type win version C - and Side Side AMD Event Strange Patch Behavior by Program Files Common Files Apple Internet Services ShellStreams dll Strange Behavior - Side by Side and AMD Patch Event Now Bitdefender doesn't finish running I can't see my graphics card I cannot install drivers or some software with Windows Installer Occasionally my mouse emulates the left button constantly being pressed i e you don't have to click it just hover the cursor over any executable object and it executes This can be reset temporarily with a reboot I've spent days trying to read boards and fix it myself Short of professional help I'm so frustrated I'm about ready to do an OS clean install You guys are my last change Below are the requested log posts Thank you in advance for your help DDS Ver - - - NTFS AMD Internet Explorer BrowserJavaVersion Run by Ken Strange Behavior - Side by Side and AMD Patch Event at on - - Microsoft Windows Home Premium GMT - AV Microsoft Security Essentials Disabled Updated E - ED- F -A - BCB F AV Bitdefender Antivirus Enabled Updated A D -CED -F B- E- D AF A D SP Bitdefender Antispyware Enabled Updated F C-E EC-F E - D E- A D A E SP Windows Defender Disabled Updated D DDC A- F- fae- E -DA C ACF SP Microsoft Security Essentials Disabled Updated DF E - D - BB- B - D E BFDE Running Processes C Windows system lsm exe C Windows system svchost exe -k DcomLaunch C Strange Behavior - Side by Side and AMD Patch Event Program Files Bitdefender Bitdefender vsserv exe C Windows system svchost exe -k RPCSS C Windows System svchost exe -k LocalServiceNetworkRestricted C Windows System svchost exe -k LocalSystemNetworkRestricted C Windows system svchost exe -k LocalService C Windows system svchost exe -k netsvcs C Windows system svchost exe -k GPSvcGroup C Windows system svchost exe -k NetworkService C Windows System spoolsv exe C Windows system taskhost exe C Windows system svchost exe -k LocalServiceNoNetwork C Windows system Dwm exe C Windows Explorer EXE C Program Files x Common Files Adobe ARM armsvc exe C Program Files Bonjour mDNSResponder exe C Program Files Intel iCLS Client HeciServer exe C Program Files Malwarebytes Anti-Malware mbamscheduler exe C Program Files Malwarebytes Anti-Malware mbamservice exe C Program Files Malwarebytes Anti-Malware mbam exe C Program Files x PasswordBox pbbtnService exe C Program Files x CyberLink Shared Files RichVideo exe C Windows system taskeng exe C Windows system svchost exe -k LocalServiceAndNoImpersonation C Windows system svchost exe -k imgsvc C Program Files x AVG AVG PC TuneUp TuneUpUtilitiesService exe C Program Files Bitdefender Bitdefender updatesrv exe C Program Files x DriverUpdate DriverUpdate exe C Windows system taskeng exe C Program Files Microsoft Mouse and Keyboard Center ipoint exe C Program Files Microsoft Mouse and Keyboard Center itype exe C Program Files Realtek Audio HDA RAVCpl exe C Program Files Realtek Audio HDA RAVBg exe C Program Files Bitdefender Bitdefender bdagent exe C Program Files Bitdefender Bitdefender pmbxag exe C Program Files Bitdefender Bitdefender antispam bdapppassmgr exe C Program Files x Seagate Seagate Dashboard Seagate Dashboard Uploader exe C Program Files x Callaway upro sync UPROsync exe C Program Files x AVG AVG PC TuneUp TuneUpUtilitiesApp exe C Windows system svchost exe -k NetworkServiceNetworkRestricted C Program Files x Google Chrome Application chrome exe C Program Files x Google Chrome Application chrome exe C Program Files Windows Media Player wmpnetwk exe C Windows System ... Read more

A:Strange Behavior - Side by Side and AMD Patch Event

It now seems something as completely taken up all the space on my C: drive.

http://www.bleepingcomputer.com/forums/t/536151/strange-behavior-side-by-side-and-amd-patch-event/
Relevancy 91.16%

We're Setting up wi-fi to support two 3 story houses side-by-side.

I want to do this we'll, but as economically as possible.

Right now I have the strongest 700mw Amped Wireless router on the upper floor of one of the houses. The best we can do is 3 bars in some areas next door, and no or low signal in the weaker areas.

I've read about using a second residential router on an ethernet cable as an access point in the second house.
I've read some about the Ubiquity Bullet devices.
I've tried various extenders over the years with limited success. For me, they've been temperamental and often have to be reset.

Can anyone make some suggestions? If it's with the Bullet, what parts would I need and do you know the approx prices?

Tips appreciated.
 

Relevancy 91.16%

The problem started today None of my microsoft office programmes open up configuration problem and help! Please Side-by-side file association. - Word Excel etc The suite has been istalled on my computer for the last year and have had no problems However yesterday when a update for my sony reader failed to complete I had to end task the sony update - could this have corrupted something I ve removed the sony software from the computer but still nothing works Everytime I click on the word excel etc icons to open up the applications I get this message This file does no have a programme associated with it for performing this action Create an association in the Set Associations panel So I accessed the control panel and looked over all these applications and the extensions All extensions like doc etc have the correct default programme - e g doc is defaulted to Word But the problem is that I can t even open up the Word application itself I uninstalled the microsoft office suite through control panel rebooted the computer and reinstalled And then I tried the following - When Side-by-side configuration problem and file association. Please help! I double click on the Word icon on the desktop to open it that way I get the message This application has failed to start because its side by side configuration is incorrect Please see the application event log for more detail - I did check out the event log and found this message MMC could not create the snap-in The snap-in might not have installed correctly NAME Event Viewer CLSID FX b ad-fe c- -be - a cbb cb Also when reinstalling the microsoft office suite during installation I got a message saying that the send to onenote driver failed to install because it was missing and I clicked ok and continued installation Please note that this message did not come up the first time I installed this suite back in July Can someone help me please I haven t a clue what s wrong and it just won t work None of the office programmes are opening and I m getting really frustrated Edit Just checked other progammes Adobe and such aren t working either The same messages show up List of programmes which are not working Adobe Reader Windows Live Messenger When I click on Norton it doesn t open up BUT it does open up when I click the icon on the task bar My network adapter is working I m on the internet now obviously but the adapters application doesn t open up I ve got Windows Vista -bit operating system service pack Thanks nbsp

A:Side-by-side configuration problem and file association. Please help!

If you Google the last error message and the CLSID of {b05566ad-fe9c-4363-be05-7a4cbb7cb510} you will find lots of people with the same problem, but they don't all appear to have been "fixed" the same way.
Some involve a DLL file and others seem to implicate AVG.
 

https://forums.techguy.org/threads/side-by-side-configuration-problem-and-file-association-please-help.948895/
Relevancy 91.16%

I'm at my wits end so I really hope someone can help. Every time I try to open a MS Office 2010 program, I get an error message "the application failed to start because its side-by-side configuration is incorrect. Please see the application event log for more details." I have not made any changes or added any programs.
I am running Vista SP2
I tried uninstalling and reinstalling Office.

I can open every other program, even other Microsoft programs, such as Frontpage 2003
 

A:The application has failed to start because its side-by-side configuration

Hi TamariaM

Googling your error message gives this link:
http://www.codeproject.com/KB/winsdk/sidebysideerror.aspx
http://blogs.msdn.com/b/developingf...rror-message-given-launching-dynamics-gp.aspx

Do you have Visual Studio installed?
Did you check the Event Viewer as the error message advised?
 

https://forums.techguy.org/threads/the-application-has-failed-to-start-because-its-side-by-side-configuration.965538/
Relevancy 91.16%

I run a HP [VISTA-64] computer with HP Upgrade to WIN7 DVD. I have run the DVD a few times, and *basically* W7 is fine. There is ONE issue though. When I have a few family JPGs open and go to the T-B, click on 'Show Windows Side by Side', it does not work right, as it did in V-64. The last time I reformatted, then upgraded to W7, Side by Side worked *once*, then...never again. Almost seems like something else I run 'kills' the ability to view a few JPGs [comparing]. My Wife will not use this W7 computer until I get this squared away. I cannot find a thing about the problem, and nothing on the HP Tech URL either...

Any Help ??

Bill

A:W7 Taskbar 'Show Windows Side by Side' Prob.

Hello BillsLastStand, welcome to Seven Forums!


Maybe a clean install will fix your issues, have a look at the tutorial at the link below.

Just backup all your important data first.

Clean Install with a Upgrade Windows 7 Version

http://www.sevenforums.com/general-discussion/65987-w7-taskbar-show-windows-side-side-prob.html
Relevancy 91.16%

Hi,

how can I merge two csv files (A and B) side by side with batch script ?:


Code:
A:

a b c
d e f

Code:
B:

h i j k
l m n o
p q r s
and the desired output should be C:


Code:
C:

a b c h i j k
d e f l m n o
(blank)p q r s

A:How do I merge two csv files side by side with batch script

Broke a sweat writing this one.

Here's your batch script, Electr0n2. Simply pass both CSV files as parameters.


Merge_two_csv_files_side_by_side.bat

Code:
:: Takes two CSV files and combines them "side-by-side".

@echo off
if "%~2"=="" exit /b 1& if not "%~3"=="" exit /b 1

::
set outfile=".\%~n1_%~n2.csv"
set outfile_csv_delimiter=","
::

goto :main

:file_line_counter FileName VariableName
setlocal
for /f "delims=" %%I in (' find /v /c "" ^< "%~1" ') do (
set VAR=%%I
)
endlocal & set %2=%VAR%
goto :eof

:SUB Counter CsvFileName
setlocal
if "%~1" GTR "0" ( set skip="skip=%1") else ( set skip="")
for /f "tokens=1,* %SKIP:"=% delims=]" %%I in (' find /v /n "" ^< "%~2" ') do (
for %%K in (%%J) do (
set/p=%%K <NUL >>%TEMPFILE%
)
goto :break
)
:break
endlocal
goto :eof

:r_trim_once Char
setlocal EnableDelayedExpansion
call :get_string_length "%~1"
for /f "delims=" %%I in ('type "%OUTFILE:"=%"') do (
set line=%%I
if "!LINE:~-%STRING_LENGTH%!"=="%~1" set line=!LINE:~0,-%STRING_LENGTH%!
echo.!LINE!>>%TEMPFILE%
)
copy %TEMPFILE% "%OUTFILE:"=%" >NUL
del %TEMPFILE%
endlocal
goto :eof

:get_string_length String
setlocal
set VAR=%~1
set "len="
:loop_1133
if defined VAR (
set VAR=%VAR:~1%
set /a len+=1
goto :loop_1133
)
endlocal & set string_length=%LEN%
goto :eof

:remove_numeric_chars VariableName String
setlocal EnableDelayedExpansion
set VAR=%2
for /l %%I in (0,1,9) do ( set VAR=!VAR:%%I=!)
endlocal & set "%1=%VAR%"
goto :eof

:main

if exist "%OUTFILE:"=%" del "%OUTFILE:"=%"

set tempfile="%TEMP%\tmp%RANDOM%_%~nx0.txt"

call :file_line_counter "%~1" LEN_1
call :file_line_counter "%~2" LEN_2
if "%LEN_1%" GTR "%LEN_2%" ( set /a len=LEN_1) else ( set /a len=LEN_2)
set "len_1="& set "len_2="

call :remove_numeric_chars outfile_csv_delimiter "%OUTFILE_CSV_DELIMITER:"=%"

for /l %%C in (0,1,%LEN%) do (
call :SUB %%C "%~1"
call :SUB %%C "%~2"
if exist %TEMPFILE% (
for /f "usebackq delims=" %%F in (%TEMPFILE%) do (
for %%I in (%%F) do (
set/p=%%I%OUTFILE_CSV_DELIMITER:"=%<NUL >>"%OUTFILE:"=%"
)
echo.>>"%OUTFILE:"=%"
del %TEMPFILE%
)
)
)

call :r_trim_once %OUTFILE_CSV_DELIMITER%

http://www.sevenforums.com/general-discussion/371218-how-do-i-merge-two-csv-files-side-side-batch-script.html
Relevancy 91.16%

I know computers fairly well, however I am new to 64 bit.
For some strange reason my Vista 64 started giving me side by side errors.
Every single 32 bit (Program files(x86)) app give me the error, while any 64 bit apps dont.

Trolling for a few hours I found the most common solution to be installing vcredist_x86 This file wont install it gives me the same error.

So I downloaded vcredist_x64, but this file is built with a 32 bit self extractor and results with the same error. I Tried uninstalling the Visual Studio 05 but it gives me a windows installer can not be accessed.

Is there some trigger that can enable windows 32 bit installs to work and I can install vcredist_x86? Thanks.
 

https://forums.techguy.org/threads/vista-64-side-by-side-error-running-32-bit-programs.808325/
Relevancy 91.16%

Running Windows 7. MS Office Basic 2007 will not open up word, excel, and outlook. I get the side by side configuration error. In checking the event log, it says that the Snap MMC would not start. I am totally lost and do not want to reformatt the hard drive.

I have uninstalled all the .NET programs and the office program. I ran all the Windows updates. I uninstalled the Visual C ++ programs and reinstalled them.

Please help.
 

A:Office 2007 side by side configuration error

Hi, welcome to the forum,

I have never heard of this but found this using Google :

http://www.codeproject.com/KB/winsdk/sidebysideerror.aspx

Maybe you can find your solution here,

Good luck

BTW, no need to format.
 

https://forums.techguy.org/threads/office-2007-side-by-side-configuration-error.1003391/
Relevancy 91.16%

For some strange reason my Vista 64 started giving me side by side errors.
Every single 32 bit (Program files(x86)) app give me the error, while any 64 bit apps dont.
Trolling for a few hours I found the most common solution to be installing vcredist_x86 This file wont install it gives me the same error.
So I downloaded vcredist_x64, but this file is built with a 32 bit self extractor and results with the same error. I Tried uninstalling the Visual Studio 05 but it gives me a windows installer can not be accessed.
I have tried using a restore point, I have tried sfc /f and it made a log that I am unable to read.
Is there some trigger that can enable windows 32 bit installs to work and I can install vcredist_x86? Thanks.

http://www.vistax64.com/general-discussion/257334-vista-64-bit-side-side-config-error-msg-all-programs.html
Relevancy 91.16%

Hi,

I am a student and need to install many types of software over and over again.
If I understand it correctly, windows makes backups of all DLL-files to prevent the DLL-hell scenario from happening.
But as I need to install/remove many programs I end up with a lot of garbage (I asume) in my winsxs folder.

Right now I have a winsxs folder of 11.3 gb, an application folder of 7.5gb on my 120gb ssd (windows) drive and about 117gb off apps (and games) on my storage drive.

I formatted my laptop this summer but I am concerned that my drive will get flooded with storage data faster then I can remove apps from my C-drive.

What I would like to know is:
- In what case does winsxs backup all my DLL-files
- How can I prevent windows from doing that? (protable apps?)
- How can I prevent the DLL-hell scenario while preventing sxs growth?

http://www.eightforums.com/performance-maintenance/32891-windows-side-side-service-hdd-space-usage.html
Relevancy 91.16%

I've tried deleting both of those and the one for the viewer can be removed but the windows one I can't do anything too.


Activation context generation failed for "C:\Program Files\Phoenix Viewer\PhoenixViewer.exe".Error in manifest or policy file "" on line . A component version required by the application conflicts with another component version already active. Conflicting components are:. Component 1: C:\Windows\WinSxS\manifests\x86_microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.4016_none_d0893820442e7fe4.manifest. Component 2: C:\Program Files\Phoenix Viewer\Microsoft.VC80.CRT.MANIFEST.

A:Phoenix Viewer [Event ID:78 Side by Side Error]

Hello and welcome

What process did you use to attempt to delete them, where and how.


americancritic

http://www.vistax64.com/crashes-debugging/289053-phoenix-viewer-event-id-78-side-side-error.html
Relevancy 91.16%

ERROR says,
The application has failed to start because its side-by-side configuration is incorrect. Please see the applications event log or use the command-line sxstrace.exe for more detail.

A:The application has failed to start because its side-by-side configura

what program are you running? Try to uninstall, reboot--> reinstall the program, then reboot. I've seen this a lot, sometime trying to uninstall third party firewall, then reinstall the program are solutions

Regard,
Tuan

http://www.sevenforums.com/software/94817-application-has-failed-start-because-its-side-side-configura.html
Relevancy 91.16%

When I attempt to open my windows live messenger the following error comes up:

"C:\Program Files\Windows Live\Messenger\msnmsgr.exe

The application has failed to start because its side-by-side configuration is incorrect. Please see the application event log for more detail."

I've tried to uninstall/reinstall and repair it. I don't understand what to look for in the event log to fix this. I am using Windows Vista Home, and my PC is an HP Pavillion.

I hope someone can help out
 

Relevancy 91.16%

HI all,

Well my low post count is going to get a bit bigger.

On my desktop this morning I received this error,

The application has failed to start because its side by side configuration is incorrect.....
Spent lots of time googleing and have done disc checks, start-up repair sfc /checknow, (or something like that as that was this morning), and all came up ok.

Next coarse of action looks like un-install and re-install of the .net framework and the Visual C++. Now that seems like a good idea but same error is coming up when trying to run the installers as there .exe..

Only managed to get files of the net by laptop.
Looks like repair install might be next

Any advise on how to get the .exe files running would be great. As it seems Im going nowhere till then.

Thanks
Timon

A:Side by side configuration incorrect...? Error stopping 95% of .exe

Sorry, also cant uninstall anything through control panel ether... so sad.
Thanks

*Edit*

I had wondered if it could have been a bit of nasty software, as was opening up some links to some screen shots of TPB and had a few more pop ups than I was happy with... closed them all of cause and didn't end up with anything downloaded that I was aware of. Only bring this up as this error seems to be linked with software install problems too.

Thanks

http://www.sevenforums.com/bsod-help-support/233157-side-side-configuration-incorrect-error-stopping-95-exe.html
Relevancy 91.16%

Hi Everyone!

I have 2 screens open side-by-side so that I can verify any duplicate content. When I scroll either document, they both scroll which isn't very helpful.

Can someone offer a suggestion on how to stop the simultaneous scrolling?

Thanks in advance for your assistance.

Vic

Relevancy 91.16%

First of all sorry if this doesn't belong here guys So guys I'm looking for quot tv box quot style device that would let me show completely different video inputs on a single display either side by side or top bottom After looking online one of the first results were from a company called Colorado Video and this is their most recent product Split Screen mode allows portions of each of two pictures to be displayed in a corresponding portion of a video display This mode can split a video image wipe or display two single side 2 by different display? a on inputs side shown video images or a dual video image one image over the other top to bottom or side by side to make portions of each viewable 2 different inputs shown side by side on a single display? on a single monitor Images from two cameras can be displayed on one video monitor This adjustable video screen splitter can split an image mix wipe overlay or switch an image or display from two different high definition video sources creating dual video images or pictures on one screen or monitor A front panel control selects whether the screen is split horizontally or vertically A control knob determines the proportion of the screen allocated to each source adjustable from to The user can freeze either of the inputs and either input can be viewed exclusively by push of a button Source High Definition Video Comparator Split Screen Mix Subtract Freeze Hi-Def HD DVI VGA HDMI It looks great and all that but the device costs around do you guys by any chance know of another cheaper option maybe one that you've worked with Thanks

A:2 different inputs shown side by side on a single display?

If you're willing to settle for something like PIP on a TV, you can save yourself a lot of money. That's the only "just works" solution I can come up with, but you don't have any real flexibility in the size and placement of the second image. You could probably also cobble something together with a video capture card, but when you factor in how much time you spend on putting it together, you probably haven't really saved any money.

http://www.eightforums.com/graphic-cards/56399-2-different-inputs-shown-side-side-single-display.html
Relevancy 91.16%

This application has failed to start because it's side by side configuration is incorrect. Please see the application event log for more detail.

This message pops up when I click any icon. So i pretty much can't do anything on my laptop. Please please please help me. I can't even open the internet browser.
 

A:The application has failed to start because it's side by side confirguration is..

Can you boot into safe mode??
 

https://forums.techguy.org/threads/the-application-has-failed-to-start-because-its-side-by-side-confirguration-is.1024544/
Relevancy 91.16%

Has anyone seen this before?
This seems to be happening more and more, I am using my PC (with Windows 8 Pro) as an HTPC and its connected via HDMI to a plasma TV so the PC is always on. Sometimes, when I go to use the pc I turn the TV on and then move the mouse around to turn the display on and I see the attached image, it looks as though the screen has shifted to the right and wrapped around to the other side.
I ran windows 7 with the same hardware on this setup for years without an issue. Any guidance is greatly appreciated.

A:Left side of screen rolled to right side of monitor..

Did you ever get any sulution for this problem ?

I have the same problem with my windows 7 ultimate, tried everything now, the last step i'm testing now is an older driver.

http://www.eightforums.com/graphic-cards/19753-left-side-screen-rolled-right-side-monitor.html
Relevancy 91.16%

This is kind of a pain. I can't find anyone out there except some C++ programmers that really talk about this problem. I have Vista Ultimate, 2 gigs of ram, 2 video cards in SLI, 2.4ghz X2 processor. All of my games and programs work, with the exception of BioShock, and now my windows update. I downloaded the demo yesterday from Steam, and got this messege

the application has failed to start because its side-by-side configuration is incorrect. Please see the application event log for more details

I thought this was a problem with the Steam download, so I went ahead and purchased the full game of BioShock. Got the same messege. I am really at my wits end. I have been at this since 10am and have gone nowhere... Thank you in advance.
 

A:Solved: ..failed because it's side-by-side configuration is incorrect

https://forums.techguy.org/threads/solved-failed-because-its-side-by-side-configuration-is-incorrect.613262/
Relevancy 91.16%

Hi everyone,

I am really new and not technically savvy like most of you seem to be!

I actually tried upgrading my iphone and that lead to having to upgrade itunes and that returned a side by side configuration error which I have spent hours trying to google and resolve - with no success. If anyone could help it would be greatly appreciated! I'm not sure what info you need or even where to start anymore. Thanks in advance.

A:Side by side configuration error when trying to install itunes

Hello megang,

My daughter's name is Megan Grace (MeganG) - you're not her are you?

Try running the System File Checker (SFC) - follow Option 2 of this SevenForums tutorial and attach your results (see option three to "shrink" the results) when you next post. You might have to run SFC a few times to completely resolve the SxS issues.

http://www.sevenforums.com/bsod-help-support/253990-side-side-configuration-error-when-trying-install-itunes.html
Relevancy 91.16%

All excuse my lack of computer knowledge but is there anyone out there who can dumb down an explantion or solution to the barrage of side by side config errors I just started getting whenever I try to run any application e g Office or Photoshop I have literally scoured the posts forums internet looking for solutions and I think a lot of my problem is I don't know the lingo so the explanations look like they are writtien in Klingon For instance one suggestions was to run sxstrace exe How the heck do you do that WHere do you do that What do you do with the results The example looked like a bunch for config Klingon side-by-side written Help in error...not of gobblygook was produced I am sorry to drag this forum down but maybe there are some tired experts out there tonight who Help for side-by-side config error...not written in Klingon are happy to use minimal brain effort to try to explain how I might resolve this I appreciate any and all assistance Your humble amateur friend Betty

A:Help for side-by-side config error...not written in Klingon

Originally Posted by Moraga Betty


All, excuse my lack of computer knowledge but is there anyone out there who can dumb down an explantion or solution to the barrage of side by side config errors I just started getting whenever I try to run any application (e.g. Office or Photoshop)? I have literally scoured the posts/forums/internet looking for solutions and I think a lot of my problem is I don't know the lingo so the explanations look like they are writtien in Klingon. For instance, one suggestions was to run sxstrace.exe. How the heck do you do that? WHere do you do that? What do you do with the results? The example looked like a bunch of gobblygook was produced. I am sorry to drag this forum down, but maybe there are some tired experts out there tonight who are happy to use minimal brain effort to try to explain how I might resolve this. I appreciate any and all assistance!

Your humble amateur friend,

Betty



Betty, no worries, you sound just like my friend.

Can you explain the error with a little more detail? When does it occur, what you are doing when it happens? Perhaps a screenshot of the error?

~Lordbob

http://www.vistax64.com/general-discussion/218990-help-side-side-config-error-not-written-klingon.html
Relevancy 91.16%

Hello.
I am getting the following error:

I've tried nearly everything possible. I've tried a sfc /scannow (CBD log is below), I just ran a chkdsk.exe, reinstalled Visual C++ and nothing has fixed it. I've also tried reinstalling the program.
What else can I do? I cannot use a Windows Installer Disk as I don't have one as the company installed Windows for me and I never got a disk.I also don't have a CD large enough to put the .iso on it. I made a Windows Repair Disk but I can't seem to be able to boot from it, my BIOS is that of a Gygabite 990x Mobo.

Please help.

Download to my CBS.txt log: CBS.txt

A:Side By Side Confiuration Incorrect (Installing Dreamweaver)

Here's the event log on the error:
Activation context generation failed for "C:\Program Files (x86)\Adobe\Adobe Dreamweaver CS5.5\Dreamweaver.exe".Error in manifest or policy file "C:\Windows\WinSxS\manifests\x86_microsoft.vc90.mfc_1fc8b3b9a1e18e3b_9.0.30729.6161_none_4bf7e3e2bf9 ada4c.manifest" on line 0. Invalid Xml syntax.

http://www.sevenforums.com/bsod-help-support/210457-side-side-confiuration-incorrect-installing-dreamweaver.html
Relevancy 91.16%

Good Morning,
I have three identical machines all running Vista Home Premium with Service Pack 2. All three have Office Home and Student 2010 installed. On one machine I have to keep uninstalling and reinstalling Office because I get the side by side configuration error on a random and recurring basis. Is there a permanent fix for this? I have the free upgrade for Windows 7 Home Premium for all three machines but have not used them because I am generally happy with Vista. Would upgrading to Win7 possibly help?
Thanks in advance for any help.

http://www.vistax64.com/software/296821-side-side-configuration-error-office-2010-a.html
Relevancy 91.16%

Hello
I use Dell Studio 1536 with this resolution :
1280*800

It is important for me to keep 2 apps in same screen at least, for example IE and Translator.

I also tried to edit regedit as a tutorial found on Bing said to follow to enabling this feature.
but the problem still is alive and restrict me just to switching between apps which is not comfort.

any solution ?

thank you

A:Metro side by side windows doesn't work

Try this:

ModernMix? - Run Modern (Metro) apps in a window on your desktop with ModernMix?

http://www.eightforums.com/general-support/26187-metro-side-side-windows-doesnt-work.html
Relevancy 91.16%

When I tries to run Glary Utilities 5.46, the following error message appears.
'The application has failed to start because the side by side configuration is incorrect please see the application event log or use the command line sxstrace.exe tool for more detail'

I had posted a question in Microsoft Community and did what the support engineer said, including repairing corrupted files with RestoreHealth, re-installation in compatible mode and restarting the computer, but the side by side configuration error still appears. What else can I do?

The following have already been installed. http://fud.community.services.suppor...9-a0777b03746e

http://www.tenforums.com/software-apps/45204-failed-start-because-side-side-configuration-incorrect.html
Relevancy 91.16%

I just got a new HP desktop computer with Vista Home Premium SP1 loaded. I am trying to install an older Photosmart C6150 All-in-One printer. I downloaded the latest software from the HP webside. After install, the printer works great. When I run HP Solution Center to initiate a scanning operation, I get the following error message:

"C:\Program Files\HP\Digital Imaging\bin\hpqkygrp.exe The application has failed to start because its side-by-side configuration is incorrect. See event log...".

I have tried everything I can think of. I have used the L4 uninstall, disabled antivirus, cleaned the registry, etc. Nothing works. I spent hours on the HP web contact site but got no useful help. From searching other forums (including HP's) I know other people have experienced this or similar problems. Does anyone have a solution?

A:HP Solution Center side-by-side error message

Re: 'The application has failed to start because it's side-by-side configuration is incorrectThis problem has annoyed me for months now, so I decided to have another go and I have just worked out how to successfully fix this issue!!!!!!!The file that has the problem is a manifest file that is required for any program written in Microsoft Visual C.In my case the file existed but was completely empty. The file is "C:\WINDOWS\WINXSX\MANIFESTS\x86_policy.8.0.microsoft.vc80.mfc_1fc8b3b9a1e18e3b_8.0.50727.762_none_8a14c0566bec5b24.manifest"As this is a system file, you cannot delete it from Vista (even with admin privileges) so first you have to take ownership of the file. To do, this follow the instructions on this link:"http://www.howtogeek.com/howto/windows-vista/how-to-delete-a-s...sta/"Once you own the file delete it and then reinstall the program that is failing (MS Flight Sim X Trail in my case).Everything now works absolutely fine.hardwareanalysis.com

http://www.bleepingcomputer.com/forums/t/225662/hp-solution-center-side-by-side-error-message/
Relevancy 91.16%

Hi

I cant remeber if i did anything out of the ordinary when it started, but some time ago(some time ago becouse i havn't had time to fix it) when i started my Windows 7 64bit ASUS laptop every time i opened an .exe file, it said side-by-side configuration incorrect. Later i found out it only happened to x86 programs. Don't know if there is an connection, but windows explorer wasn't working either at all after the same boot, but i managed to get it working again by disabling two shell extensions. (one preinstalled from ASUS, and one named XPClient.FileSystemBrowser.BackupContextMenuExtension.BackupContextMenuExtension)

I've seen some saying to reinstall microsoft visual c++, but as it isn't any 64bit installer, so its impossible at the moment.

(I already posted this in the general discussion, but i think it was the wrong forum, so i reposted it here. Is it possible to delete the previous thread?)

Any suggestions?
Thanks

A:Side-by-side configuration incorrect on all 32bit .exe programs

Welcome to Seven Forums janstephan. Actually, there are both versions for x64 systems. Here are the versions I have on my system

Here are the downloads for C++ 2005

http://www.microsoft.com/en-us/downl....aspx?id=21254

http://www.microsoft.com/en-us/downl...s.aspx?id=3387

Here are the 2 downloads for C++ 2008

http://www.microsoft.com/en-us/downl....aspx?id=15336

http://www.microsoft.com/en-us/downl...ils.aspx?id=29

Here are the 2 downloads for C++ 2010

Download Microsoft Visual C++ 2010 Redistributable Package (x64) from Official Microsoft Download Center

Download Microsoft Visual C++ 2010 Redistributable Package (x86) from Official Microsoft Download Center

There are also various SP1 versions, etc. Determine what versions you have already.

Start> In search box type Add or remove programs> Enter

Scroll down to Microsoft Visual C++

A Guy

http://www.sevenforums.com/software/269966-side-side-configuration-incorrect-all-32bit-exe-programs.html
Relevancy 91.16%

Hello everybody I have had this problem for over a year and have posted on other forums and done almost everything I could think of to try to get the game working again to no avail Let me start off with the beginning THE BEGINNINGAround this time last year I downloaded a game called Bully Scholarship Edition for my PC through steam It was running fine until one day when I went to start it up Steam gave me this error http puu sh ovHsI thought nothing of it for a while I then 'side-by-side Game Problem incorrect' configuration tried to run the raw exe file only to get this error http puu sh ovI I asked an online friend about this he said to check event viewer Game Problem 'side-by-side configuration incorrect' which I did I found this relating to Game Problem 'side-by-side configuration incorrect' the problem http puu sh ovICMEASURES TAKENNote - the above images are images taken after some of my first actions My online friend told me to open the manifest file with Notepad Not surprisingly this is what I got U V S Y c a amp d com amp d microsoft - U Microsoft Root Certificate Authority y J LsX e P U I G E C A http crl microsoft com pki crl products microsoftrootcert crl T H F D http www microsoft com pki certs MicrosoftRootCert crt U H D w yQM tq m mb W N P z W X x H S O I have attatched the corrupted manifest file to this thread He reconstructed the corrupted manifest file for me however even when I had set the file permissions of the manifest files to me Windows wouldn t let me modify move or delete them I had to resort to booting into linux and let him reconstruct the file It worked because when I tried to run the game again the error pointed to a different manifest file the picture in the link above Besides that here are the other measures I have taken I have deleted the game and re-downloaded it completely I tried to run it again with the same result I have followed all instructions at this link the Steam Support Database to no avail I am at my wits end I have procrastinated getting this sorted out simply because I don t have the knowledge to fix it This is why I have ended up hereIf I don t get this problem fixed I will have to resort to re-installing windows Thanks in advance -Sandsh rk

A:Game Problem 'side-by-side configuration incorrect'

Hi Sandsh8rk -Are you more interested in fixing the problem, or removal of the program and any traces of it ??The removal of all traces "may" cure your problem, but if you want / need to play the game it will require another approach -Thank You -

http://www.bleepingcomputer.com/forums/t/449339/game-problem-side-by-side-configuration-incorrect/
Relevancy 91.16%

Hi Pretty much the problems I m experiancing are all video streaming related I cannot stream most videos off the internet i always just get a blank loading screen saying and DivX configuration errors uninstallation side-by-side quot waiting for video quot and sometimes the websites suggest I download Divx plus Web player I have downloaded DivX web player and have the latest updates but everytime I try to run the actual DivX Plus player from my start menu I get an error message saying quot The application has failed to start because its side-by-side configuration is incorrect quot So naturally I tried to uninstal DivX from my computer so I could reinstal it to have it work but when I go into my control panel and use the add remove programs when I click uninstall nothing comes up I click it the windows permission thing comes up and I click Yes then nothing else comes up no interface that will allow me to DivX uninstallation and side-by-side configuration errors uninstall it So I guess what im asking is either a how can I delete it without using add remove utility or how to fix that and or b How do i uninstal DivX and reinstal it to have it work nbsp

A:DivX uninstallation and side-by-side configuration errors

You might try an actual player such as this free one called RealPlayer here as I only get my "codecs" from DivX and do not use or have not used their "Player" I cannot offer any reason why what your trying is not working. Hope this helps
 

http://www.techspot.com/community/topics/divx-uninstallation-and-side-by-side-configuration-errors.152556/
Relevancy 91.16%

I used to be able to peruse both at the same time, but suddenly this feature does not work. I'd like to restore this feature to my word processing activity. I used to go to the View tab, then click Zoom, but the side by side feature doesn't work, & I don't know how to access it. Does anyone know how to do this in MS Works 9? Thanks for any help.

http://www.sevenforums.com/general-discussion/391734-ms-works-9-how-place-2-documents-side-side-2-windows.html
Relevancy 89.44%

I just installed a Logitech wireless mouse for my laptop (should have done it years ago) which normal sets right next to my desktop. Now I am thinking of adding a wireless mouse and keyboard to my desktop. Will there be any conflict between the two. If I move the laptop mouse will it move the desktop mouse's cursor on the desktop and vice versa?

Thank you.

A:Two Wireless Mice and Keyboards Side by Side

It will depend whether they both operate on the same frequency. That may happen if they are from the same company. You would be safer if one of the mices would be wired.

http://www.sevenforums.com/hardware-devices/257425-two-wireless-mice-keyboards-side-side.html
Relevancy 89.44%

Tech Support Guy System Info Utility version OS Version Microsoft Windows Professional bit Processor Intel R Core TM Quad CPU Q GHz Intel Family Model Stepping Processor Count RAM Mb Graphics Card Intel R G G Express Chipset Family Mb Hard Drives C Total - MB Free - MB D Total - MB Free - MB J Total - MB Free - MB Motherboard Dell Inc N N Antivirus McAfee Anti-Virus and Anti-Spyware Updated and Enabled Using the above system I downloaded the trial version of PaintShop Pro X Ultimate After installation I clicked on the icon to start the program and I get this error message Red X C Program Fileks x Corel Corel PaintShop Pro X Corel PaintShop Pro exe The application has failed to start because its side-by-side configuration is incorrect Please see the application is incorrect side-by-side Error: configuration event log or use the command-line sxstrace exe tool for more detail This program is the ONLY ONE that comes up with the error message My PaintShop Pro X Ultimate runs fine I have tried most of the solutions found in this forum and Microsoft s with no success Thanks nbsp

https://forums.techguy.org/threads/error-side-by-side-configuration-is-incorrect.1052616/
Relevancy 89.44%

I've been running into a problem on my windows vista 64-bit, starting this morning, and can't seem to fix it. I tried opening itunes, mozilla, crysis, and other programs, and every time I do I get the error message:
"The application has failed to start because its side-by-side configuration is incorrect. Please see the application event log for more detail."
I checked in my event log, and it says the side-by-side error is number 33, if that helps. I've been online for hours now, and can only find the solution to download Microsoft Visual C++ 2005 SP1 (file name: vcredist_x86.exe) but as soon as I try to run the program I get the same side-by-side error.

any help would be appreciated
 

https://forums.techguy.org/threads/windows-vista-64-bit-having-side-by-side-error-33.753962/
Relevancy 89.44%

OK well this started today probably something I installed idk Whenever I try to open program I get the error side-by-side configuration is incorrect Please see the application log for more details To be more specific it s anything that was not already open at the time this started So mozilla and some other random programs are no problem but for example these configuration anything Can't open is incorrect ----side-by-side programs would not open winrar system restore regedit event viewer dxdiag And even I tried to plug something in I Can't open anything ----side-by-side configuration is incorrect got an error about device detection So ok no idea what the problem is no specific solution found online I resorted to safe mode I restarted and I couldnt log on I m assuming because of winlogon exe or whatever program windows uses to log me in OK so now I cannot even get to the operating system I decided to check out the windows repair menu Startup repair found no problems ok so I hate doing this but I decided to system restore to last week using the repiar menu Restore completed I still cannot log in though it did not seem to help I m am now running on my backup windows xp OS and am unable to get into windows pro x If there is anything I can do to fix this please let me know So the most I can change is anything from the repair menu and I can manage files from this OS nbsp

A:Can't open anything ----side-by-side configuration is incorrect

https://forums.techguy.org/threads/cant-open-anything-side-by-side-configuration-is-incorrect.918119/
Relevancy 89.44%

when i use the taskbar function to set windows side by side all i get is 2 small windows snapped onto the left side of my screen as oposed full screen coverage.

when i use snap by dragging it works no bother,

So far no one has been able to answer my issue so i have reposted for a fresh look.

see pic's;

1st picture i used drag to snap 2nd picture i used the taskbar to set windows side by side;

A:Windows side by side dont fit correctly

  
Quote: Originally Posted by HannibalUK


when i use the taskbar function to set windows side by side all i get is 2 small windows snapped onto the left side of my screen as oposed full screen coverage.

when i use snap by dragging it works no bother,

So far no one has been able to answer my issue so i have reposted for a fresh look.

see pic's;

1st picture i used drag to snap 2nd picture i used the taskbar to set windows side by side;




On my windows 7, when i have all my windows minimised i can not choose the show windows side by side option.

Does this only happen when you have 1 window minimised and 1 window showing no matter what size??????? For some reason when i have 2 windows opened, 1 window minimised and one showing no matter what size and then click on show windows side by side it only shows and maximises the visible window.

I got around it by keeping both windows visible and then choosing show windows side by side. At the end of the day it does not matter whether windows are minimised or not, that option should always do what it is meant to do.

Hope this helped, if not at last i tried.

http://www.sevenforums.com/general-discussion/118597-windows-side-side-dont-fit-correctly.html
Relevancy 89.44%

Hi when i select to open windows to show side by side they only open to the left of the screen not filling the screen, they have only opened a few time to the correct size filling the screen a few times and dont know what is going on here.

A:Windows side by side dont fit correctly

Have you looked at this tutorial...
Snap a Window to a Side

http://www.sevenforums.com/general-discussion/118351-windows-side-side-dont-fit-correctly.html