Windows Support Forum

Compaq Presario CQ61 screen LCD cable change but not working

Q: Compaq Presario CQ61 screen LCD cable change but not working

hi all got a post further down explaining lcd cable was no good so got another plugged it all on but now nothing coming on is there any button or anything i can do or is it another bad cable

Relevancy 100%
Preferred Solution: Compaq Presario CQ61 screen LCD cable change but not working

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Compaq Presario CQ61 screen LCD cable change but not working

hi all as in previous tpost further down i explained screen comes on fully when little movement of lcd cable just where it plugs to mother board so got another wire but does same thing so now know it wasnt wire so thinking what inverter or lcd backlight please help as i do not want to buy 1 then its the other is the only way finding out by buying part and testing. thanks in advance

http://www.techspot.com/community/topics/compaq-presario-cq61-screen-lcd-cable-change-but-not-working.178178/
Relevancy 24.94%

Something like this but with a thin male connector. I need it to connect flash drives to a usb port where there's little space available around the usb port because the ports around are busy (happens in MacBook air for example).

 

A:I need a usb to usb cable adapter with thin male end

I think you're talking about a USB to Lightening converter
 

http://www.techspot.com/community/topics/i-need-a-usb-to-usb-cable-adapter-with-thin-male-end.217601/
Relevancy 24.94%

Hey guys I have been trying to set up my tv so I can watch movies online... to say the least it is not going well.. I have been trying for over 2 hours and 2 trips to Best Buy to figure out why i have no sound on my tv.

My headphone jack does work.
There is a picture due to the vga cable.
I have a Y Cable plugged all in but no sound

Please someone help!!
 

A:Laptop to TV no audio with VGA cord and y cable

Hey, I've tried to set this up at one point.. VGA doesn't seem to give sound at least on some T.V's so if you have a sound input you could try:
amazon [dot ] co.uk/s/?ie=UTF8&keywords=vga+with+audio&tag=googhydr-21&index=aps&hvadid=8326471606&ref=pd_sl_2xe1bbnp3q_e

sor maybe you could get something like:
electgadget [dot] co.uk/sg/index.html?s=3219F6825E2CD6CA31C2DE7A93A69CF9&p=51679ce3738a69b94d40325e0e3d57db&m=1324951106152&a=/products&categoryid=28&stockid=460

play [dot] com/Electronics/Electronics/4-/20708900/Trixes-HDMI-Male-To-VGA-Cable-1-8m/Product.html?_%24ja=tsid:11518|cat:20708900|prd:20708900

However I don't with to take the blame if any of these don't work
 

http://www.techspot.com/community/topics/laptop-to-tv-no-audio-with-vga-cord-and-y-cable.175240/
Relevancy 16.77%

When I try and access the internet through any of the main browsers (I.e. Internet Explorer, Google Chrome, Firefox and Safari) they tell me along the lines of 'unable to access the network' and 'this page can't be displayed' after taking a while attempting to load. I also cannot access it through any of my Windows 8 apps. I know it's not an issue with the home broadband itself and is something to do with my laptop as it is running fine both wirelessly and through using an Ethernet cable on all other devices. I would really appreciate some help with trying to fix this asap as I have spent a lot of time researching this issue and trying most things to resolve it without success, I also need to use the internet for loads of coursework over the summer hols and cannot afford to be taking it to a pricey IT technician. Please helppp
 

A:My laptop cannot connect to the internet, even though wireless and ethernet are working

Take a look at the file
\windows\system32\drivers\etc\hosts​there MUST be at least a line reading 127.0.0.1 LOCALHOST
but the question is there anything other than comments in it?
If so, leave the comments and the localhost line and delete everything else.

If you modify the hosts file, then you also need to

ipconfig /flushdns
net stop "dns client"
net start "dns client"

 

http://www.techspot.com/community/topics/my-laptop-cannot-connect-to-the-internet-even-though-wireless-and-ethernet-are-working.195158/
Relevancy 17.2%

SO close Help me get this ball across the goal line I have a old quot Microtek ScanMaker E quot scsi flatbed scanner that originally came with an ISA scsi interface to give you some idea of how old it is I connected it to my PC using a equally ancient Tekram F pci SCSI card c 64bit my got scanner Almost w/Win7 old working that I ve been using with bit WinXP Pro for years The scanner has an - quot x quot scanning bed dpi and bit color reproduction It works great and I see no reason to spend a few hundred dollars to replace it just for Win compatibility so I m trying to get it to work with the bit Almost got my old scanner working w/Win7 64bit version of Windows To complicate things the company that made my SCSI card Tekram went out of business years ago so the bit XP driver was the last they made But after MUCH Googling I found a bit Win compatible driver for another card using the same chipset and low amp behold Windows recognized it It then quot detected quot my scanner for the first time but didn t have a driver Again after much searching I found a Vista bit version of Microtek s quot ScanWizard quot scanner software with bit driver and now bit Windows detects my scanner Yeah But when I try to access the scanner I get an error telling me I quot must install Color Matching System first quot for the scanner to work I don t remember any such software being needed to use the scanner with XP and there is no such program in the ScanWizard software I just installed searching online suggests I will also need to run an quot ICC Color Profiler quot Anyone have any ideas So close yet so far I love doing things I was told were quot impossible quot Help nbsp

A:Almost got my old scanner working w/Win7 64bit

That Microtek ScanMaker E3 scsi flatbed scanner ... didn't even work well with Windows XP... and the cost in time and components to attempt to make it work are much higher than a decent Canon or Epson scanner which can be had fof $40... Less if used...

On what system are you runny SCSI ?
 

http://www.techspot.com/community/topics/almost-got-my-old-scanner-working-w-win7-64bit.157055/
Relevancy 24.51%

I recently used a program Autoruns,, and deleted some startup things I shouldn't have.. Since then I cant connect to internet, the troubleshooter for wireless adapter says the Windows wireless service is not running on this computer (WLAN Autoconfig service) and fails to start the service.
I notice on windows task manager there are only about 13 Processes running and there are usually about 20, and on Services there are about 40 running and about 100 or more stopped services. Thanks for the help

Also on startup now I have a pop up on bottom saying, Failed to connect to a windows service. Windows could not connect to the System Event Notification Service service. This problem prevents standard users from logging on to the system. As an administrative user, you can review the System Event Log for details about why the service didn't respond. And the startup and logon time is really long now
 

A:Windows 7 can't connect to internet through Wifi or ethernet cable

Sounds like you deleted the network drivers, I did this once and ill be honest unless someone here knows a trick, or you have a CD with drivers you are going to have to have a hell of a time unless you know the name of the hardware and download the right driver, thats my guess. best of luck
 

http://www.techspot.com/community/topics/windows-7-cant-connect-to-internet-through-wifi-or-ethernet-cable.200026/
Relevancy 24.51%

I have an Aspire one NAV50 with Windows 7 starter.

One time, when I turned it on, The icon for wireless connection doesn't appear anymore. Every time I try troubleshoot it, it would just say that there is an ethernet cable unplugged. And so, I connected it into the ethernet cable and it works fine. But when I tried it again on the wireless connections, it doesn't locate to any wireless connection.

I've tried the ff on my laptop:

restart
update
scan the laptop with MalwareBytes
Fn+f2
by the way, last night, when I turned on again the laptop, the wireless connections can already be found. However, after few minutes, it went back to being unlocated again.
 

A:Laptop would work on ethernet cable not on Wireless Connections

I had doubt the Starter supports the Wireless connecting but since you say " the wireless connections can already be found.", so probably it's possible.
In this case and at the moment the thing I'm thinking about is the driver. Try to update its driver for wireless connecting. (You've said the 'update', but update of what?).
 

http://www.techspot.com/community/topics/laptop-would-work-on-ethernet-cable-not-on-wireless-connections.201158/
Relevancy 24.94%

hi there my wireless through cable work will not My only ethernet internet internet was My internet will only work through ethernet cable not wireless running fine until yesterday when I tried to connect to the internet the message quot windows can t communicate with the device or resource primary dns server quot came up I followed all methods on this website http answers microsoft com en-us w -b d ec fae but none of them worked for me I then returned my laptop to factory settings in the hope it will work but that didnt not work I then realised it works through the ethernet cable but not wireless I ran ipconfig all with my ethernet cable in and this is the result SOMEONE PLEASE HELP ME THANKYOU Windows IP Configuration Host Name Nida-TOSH Primary Dns Suffix Node Type Hybrid IP Routing Enabled No WINS Proxy Enabled No Wireless LAN adapter Wireless Network Connection Connection-specific DNS Suffix Description Realtek RTL CE Wireless LAN n PC I-E NIC Physical Address D -DF- A-EB- -B DHCP Enabled Yes Autoconfiguration Enabled Yes Link-local IPv Address fe d fccc e c eb Preferred IPv Address Preferred Subnet Mask Lease Obtained October Lease Expires October Default Gateway DHCP Server DHCPv IAID DHCPv Client DUID - - - - -EB- A- A-B - -F -D - -E DNS Servers NetBIOS over Tcpip Enabled Ethernet adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description Realtek PCIe FE Family Controller Physical Address B - -F -D - -EF DHCP Enabled Yes Autoconfiguration Enabled Yes Tunnel adapter isatap EEB-B - C-AC - CEB F Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter Local Area Connection Connection-specific DNS Suffix Description Teredo Tunneling Pseudo-Interface Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes IPv Address ef fb affc eb Pre erred Link-local IPv Address fe affc eb Preferred Default Gateway NetBIOS over Tcpip Disabled Tunnel adapter isatap DF D AB- BF- FA - CB -DFA C Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes nbsp

A:My internet will only work through ethernet cable not wireless

There may be an issue on the ISP side or router side since restoring to defaults didnt help. Or it could be an issue with the network adapter. Or it could be an issue with the firewall.

Try downloading running these tools (download via ethernet, run on wireless): Network Fix-It Tool (right click on the internet bars on the task bar in the bottom right hand side of the screen, and click "troubleshoot network...") and Firewall Fix-It Tool.

Did you install anything on your PC before this happened? Did Windows install any updates?

Try disabling your AntiVirus. That may be the issue. I doubt it though.

Tell me if any of these solutions help.
 

http://www.techspot.com/community/topics/my-internet-will-only-work-through-ethernet-cable-not-wireless.197067/
Relevancy 24.51%

Hey guys,

I have a Sony Vaio VPCEH15EN laptop & the OS is Windows 7 home basic. I have a wifi router which is of TPLINK.

The wifi won't connect to my laptop but it works fine on my mobile..it would only start working when I use the ethernet cable. I never had this problem before. I have tried everything ..I also tried the winsockfix.bat but all my efforts have gone in vain..I just don't know if the wifi router is faulty or the modem of my ISP...Please help me solve this problem.

Best Regards,
Om
 

A:Wifi on my laptop won't work but works when I use the ethernet cable

I have solved the problem by myself. To do this, first you have to disconnect your Ethernet cable from your laptop and follow the steps: Start>Control Panel>Network and Sharing Center>Manage Wireless Networks and remove all wireless connections by right click on it and select Remove network from the drop down menu. After doing this, close the windows and scan for the Wi-Fi networks. Click on the available network and select connect. After a while, you will be asked to give a password for your Wi-Fi connection. Type the password and click on connect button. And now will be connected to your Wi-Fi network via wireless.

May be it will help you.
Regards
MD. MAHMUDUL HASAN
 

http://www.techspot.com/community/topics/wifi-on-my-laptop-wont-work-but-works-when-i-use-the-ethernet-cable.200754/
Relevancy 24.51%

Hi! I don't know much about this place but there's a problem with my laptop and I don't know how to solve it. My laptop won't connect to the wifi anymore but it works perfectly fine with the ethernet cable. I appreciate it very much if you tech geniuses could help me out. THANK YOU!
 

A:My WiFi on my laptop won't work but works with Ethernet cable

Are there any yellow (!) in the device manager?
 

http://www.techspot.com/community/topics/my-wifi-on-my-laptop-wont-work-but-works-with-ethernet-cable.206652/
Relevancy 40.42%

Hi guys I ve been researching and trying to days to get this to work with no avail so I decided to post here for some help as doesn't Ethernet connected Wifi work cable. using working when only Internet I see this community is really active We ve got different laptops here and none of them can connect to the wifi anymore it suddenly stopped working for the last whole week We can connect to the internet through ethernet cables though We only use one at a time if ethernet then wireless is disabled and vice versa Here is a copy of the ipconfig all Windows IP Configuration Host Name PeterMai-HP Primary Dns Suffix Node Type Hybrid IP Internet only working when connected using Ethernet cable. Wifi doesn't work Routing Enabled No WINS Proxy Enabled No DNS Suffix Search List moolahd local Ethernet adapter Local Area Connection Connection-specific DNS Suffix moolahd local Description Realtek PCIe GBE Family Controller Physical Address AC- - D- B-ED-F DHCP Enabled Yes Autoconfiguration Enabled Yes Link-local IPv Address fe ac a d b Preferred IPv Address Preferred Subnet Mask Lease Obtained Monday October PM Lease Expires Tuesday October PM Default Gateway DHCP Server DHCPv IAID DHCPv Client DUID - - - - - -FB- -AC- - D- B-ED-F DNS Servers Primary WINS Server NetBIOS over Tcpip Enabled Wireless LAN adapter Wireless Network Connection Connection-specific DNS Suffix Description Broadcom GN b g n x Wi-Fi Ada pter Physical Address -ED-B - D- -FD DHCP Enabled Yes Autoconfiguration Enabled Yes Link-local IPv Address fe c f e e b fc f Preferred Autoconfiguration IPv Address Preferred Subnet Mask Default Gateway DHCPv IAID DHCPv Client DUID - - - - - -FB- -AC- - D- B-ED-F DNS Servers fec ffff fec ffff fec ffff NetBIOS over Tcpip Enabled Tunnel adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description Microsoft to Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter isatap optusnet com au Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter isatap moolahd local Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter Reusable ISATAP Interface CE FC E - F - C C- D - D EBEC Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter isatap DDFAF D- B- -AA A-DBE BA F Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter Reusable ISATAP Interface E ED - - A -BB -FB FA F F Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes And here is a copy of the route print Interface List ac d b ed f Realtek PCIe GBE Family Controller ed b d fd Broadcom GN b g n x Wi-Fi Adapter Software Loopback Interface e Microsoft to Adapter e Microsoft ISATAP Adapter e Microsoft ISATAP Adapter e Microsoft ISATAP Adapter e Microsoft ISATAP Adapter e Microsoft ISATAP Adapter e Microsoft ISATAP Adapter e Microsoft ISATAP Adapter IPv Route Table Active Routes Network Destination Netmask Gateway Interface Metric O... Read more

A:Internet only working when connected using Ethernet cable. Wifi doesn't work

You have an IP on your LAN, but none on your wifi. Check your router to make sure DHCP for wifi is turned on and you have enough available addresses.
 

http://www.techspot.com/community/topics/internet-only-working-when-connected-using-ethernet-cable-wifi-doesnt-work.197081/
Relevancy 21.5%

My Friend has a HP Pavilion DV2000 Laptop. His display isn't work. Suddenly display gone. But I thought it could be Display problem not a VGA. So, i tried to connect an external monitor and used Shortcut keys to change the display. I pressed fu + F1 or Fu + F2 or Fu + F3 or Fu + F4 up-to F12. But no result.
I couldn't check whether it's a Display or VGA card problem. IS there any other way to check it. in addition to these is there any other combination keys to Change the display to an external monitor. I'm unable to check whether i get login or not. if I can login then i can use Windows Key + P. Then i can select mode. But I'm Unable to anything here. Please help me to find the problem and i have to take it to repairing shop.
Thanks in Advanced
 

A:Change display of laptop to external monitor

It should be the Fn + the key that shows a monitor symbol. If it still doesn't display, the motherboard video processor has failed, and not the LCD Panel
 

http://www.techspot.com/community/topics/change-display-of-laptop-to-external-monitor.168817/
Relevancy 17.2%

Greetings!

I have an MSI GS70 laptop here , its about 1 month old and the webcam has stopped working,

It has worked earlier, Nothing happens when I try to start it and when I try to find it in the device manager it is not there.

Any idea what I can try?

Thanks!
 

A:MSI GS70 Gaming laptop Webcam not working

Ok I have an MSI GT70, did you try activating it via the toolbar at the top of the screen that comes on MSI laptops. It looks like a tiny paperclip at the top of the screen in the center, there should be once you open that toolbar up an option to activate the webcam.
 

http://www.techspot.com/community/topics/msi-gs70-gaming-laptop-webcam-not-working.197211/
Relevancy 17.2%

Resolved DNS on other on one problem working laptop, DNS network computers problem on one laptop other computers on network working I returned home for the holidays with my laptop running Windows Enterprise -bit When I connect to the wireless network my laptop reports that it is connected with internet access but there is no browsing capability at all P P works Steam works but Chrome Firefox Steam browser give me DNS problem on one laptop, other computers on network working the quot This webpage is not available quot page telling me that the DNS lookup failed All the other computers at home are working happily My settings were to obtain an IP address and DNS server address automatically nslookup said DNS request timed out It didn t work with the wireless or the wired internet with an ethernet cable I set up another network by using my iPhone as a hotspot to make sure it wasn t an issue with all connections and my computer could browse just fine using the iPhone hotspot But it didn t work with my home connection The first thing I tried was to use openDNS s DNS addresses and with my home connection It still failed and nslookup gave the same quot DNS request timed out quot I reset the modem router it s combined unfortunately to factory settings and tried directly connecting with an ethernet cable again It worked for half a second and I opened webpages before it stopped and gave the DNS errors again I tried the wireless internet and it still didn t work I can connect to the modem router I made a guest network just to try it and I got DNS errors again When I reconnected to my primary network it worked for half a second again then stopped My next attempt to fix it was going to the cmd prompt and typing ipconfig release then ipconfig renew I restarted my computer and tried again but I still received the same errors with P P working like before I turned off my firewall and tried but it still didn t work Then I tried ipconfig registerdns restarted my computer and tried again Still didn t work At this point IPv has been disabled but it s still not working I restarted the modem router multiple times but it does nothing to alleviate the problem I have Microsoft Security Essentials did a scan nothing detected Also tried System Restore to two days ago got an error about how it failed Summary Using openDNS address Turned off IPv ipconfig release ipconfig renew ipconfig registerdns no virus trojan system restore failed None of the above worked Other computers at home using the ISP s provided DNS server work My computer works with other connections but not my home network Is there anything else I can try Thanks in advance nbsp

A:DNS problem on one laptop, other computers on network working

Fe3C said:





Summary:
Using openDNS address.
Turned off IPv6
ipconfig /release
ipconfig /renew
ipconfig /registerdns
no virus/trojan
system restore failed

None of the above worked.
Other computers at home using the ISP's provided DNS server work[1].
My computer works with other connections, but not my home network.Click to expand...

Good work. The router is fine[1] so don't fuss with it anymore.

Look for an updated driver for your WiFi adaptor.

On any working system run IPCONFIG /ALL and compare it to the results on the failing system. Look for missing Gateway address or IP address like 169.x.y.z

Some concern re failing system restore, but that's not a networking problem per se.

Work on a wired network first and then move to wifi.
Empty all manual settings on the LAN Connection (get properties, scroll to tcp/ip, click property button - - check ALL tabs; delete everything.

You should be able to PING 8.8.8.8 and then PING google-public-dns-a.google.com.
This shows the LAN adaptor has connectivity and DNS resolution.

Now do the very same sequence with your WiFi connection.
Disconnection from the router and then reconnect.
Inspect IPCONFIG /ALL again to look for valid IP addr, gateway addr and valid DNS settings. (not the OpenDNS you had before).

ping 8.8.8.8 ; if this doesn't work, then the WiFi settings are invalid even before DNS is an issue.
 

http://www.techspot.com/community/topics/dns-problem-on-one-laptop-other-computers-on-network-working.174565/
Relevancy 15.48%

Hello,

I've got a Dell Inspiron 9400.

For a few years now the left half of the screen is really dark, with the other side normal brightness and a noticeable divide between the two. This only happens when the power supply is plugged in, the screen is fine when running off the battery.

I remember at the time doing a quick search and reading that it was likely to be a faulty battery, so that was replaced but didn't make a difference. Very few searches come back with an exact match of my situation, but keep seeing to detach the LCD cables and make sure they're in good condition yet haven't seen any success stories.

Does anyone know the problem?

Oli
 

A:Dell Inspiron half of the screen is dark

Does attaching an external monitor show the same problem?
 

http://www.techspot.com/community/topics/dell-inspiron-half-of-the-screen-is-dark.187509/
Relevancy 17.63%

So this is my first time making a forum post since 169.xx ip address working, Ethernet not I am not desperate because nothing I ve tried has worked So two weeks ago I had an electrical surge in my house on my desktop the ethernet port on the motherboard died so I sent Ethernet not working, 169.xx ip address back my motherboard to have that fixed Now that I have it back I tried getting my ethernet to work though now the Ethernet not working, 169.xx ip address connection properly works as in Ethernet not working, 169.xx ip address the local area connection is now at least recognized I still have no internet access I just tried reinstalling Windows bit fresh install after I wiped everything My ethernet adapter is called Realtek PCIe GBI Family controller I have a E Linksys router and a Comcast modem I tried plugging the ethernet cable into each other but no luck Currently I m attempting to at least make the desktop use the modem internet directly I seem to be sending packets but not receiving them when I looked in the Status of the Local Area Connection in network connection details I have an autoconfiguration ipv of xxx xxx ipv subnet mask and nothing in the ipv default gateway dns server or wins server and no ipv default gateway I ve tried many things too many to name now but I am willing to try anything you guys mention and post the appropriate data or logs just tell me what it is you would like to see Any help would be highly appreciated nbsp

A:Ethernet not working, 169.xx ip address

Anytime you see 169.x.y.z, that's the clue that your DHCP request to the router did not get an answer.

DHCP should return an IP address directly related to your router's address and two DNS addresses.

search the form for DHCP - - I've posted a solution here on TS.
 

http://www.techspot.com/community/topics/ethernet-not-working-169-xx-ip-address.203386/
Relevancy 17.2%

HP G62-b80SS laptop
Many keys in the keyboard aren't working. I've successfully replaced the motherboard for this laptop because it went dead because of some dampness trickling going inside and is now otherwise working fine. It's been abandoned for 7 months. I've reseated the keyboard connector and cleaned it with a contact cleaner.
I guess I need to get a new keyboard, am I right?
Thanks!
 

A:Many keys in keyboard not working HP G62-b80SS laptop

Or the motherboard keyboard connector is damages by corrosion...
 

http://www.techspot.com/community/topics/many-keys-in-keyboard-not-working-hp-g62-b80ss-laptop.213407/
Relevancy 16.34%

AMD graphics card owners that have tried playing The Witcher 3: Wild Hunt or Project Cars are likely already aware of the fact that both titles run like crap on Radeon hardware. There's a ton of controversy surrounding what did...

Read more
 

A:AMD is working on Catalyst beta drivers for 'The Witcher 3: Wild Hunt' and 'Project Cars'

"AMD graphics card owners that have tried playing The Witcher 3: Wild Hunt or Project Cars are likely already aware of the fact that both titles run like crap on Radeon hardware."

At the risk of pointing out the obvious, "runs like crap" doesn't strike me as professional an expression as "runs terribly" or "are both exceptionally poor performers on..." It may convey the sentiments of the accompanying article comments, but those are supposed to be crude.
 

http://www.techspot.com/community/topics/amd-is-working-on-catalyst-beta-drivers-for-the-witcher-3-wild-hunt-and-project-cars.213323/
Relevancy 24.51%

I get a bit jittery when I'm unplugging cable connectors (these images are just examples, I'm thinking of all types of connectors). What's the best way to safely unplug them?, pull from the cables or from the plastic case. What's your experience?. This pics are just a few examples of connectors. I'm posting this thread about any type of connectors. Thank you.


 

A:What's the best way to unplug laptop cable internal connectors on motherboard etc?

Many simply pull apart. Watch out for the ones with locking tabs though. I don't think you have anything to worry about as long as you take your time.
 

http://www.techspot.com/community/topics/whats-the-best-way-to-unplug-laptop-cable-internal-connectors-on-motherboard-etc.212863/
Relevancy 17.63%

My hard drive died and I took it to a computer shop where he put in a new one and windows XP, as no one had a vista disc. Since I got it back the blue Fn key doesn't work. Numbers lock works, but all the F keys, volume controls, brightness controls and my crt/lcd don't work at all. Dell doesn't seem to have a driver that I can find. Does anyone have one that would fix this? Is there another way to use the F keys, especially the crt/lcd without having to use the Fn key?
 

A:Fn key not working on Inspiron 1501 with XP

Be sure you are the registered owner, then call Dell Tech support, and ask them to send you the install disk set... It is usually free for the original owner, if not supplied at time of purchase.
 

http://www.techspot.com/community/topics/fn-key-not-working-on-inspiron-1501-with-xp.156952/
Relevancy 54.61%

I don't really know a lot about upgrading my computer. Any help would be great. Thanks.
 

A:Budget upgrade for HP/Compaq Presario CQ5000 Series Desktop CQ5802

I forgot to mention I am trying to make it run games like CS:GO and DayZ at a reasonable level.
 

http://www.techspot.com/community/topics/budget-upgrade-for-hp-compaq-presario-cq5000-series-desktop-cq5802.212644/
Relevancy 17.2%

Hi
I have an asus x555ld-x0549h, it has a built in camera that does not work. I have been searching for a driver all day and didnt find a thing...
then I tought that the camera was being blocked and I enabled it and... still noting...
can anyone help me please?
I'm using windows 8 and the camera app says that I need to plug in a camera... so.... wtf?! :S
 

A:Asus x555ld built in camera not working

How old is this laptop?
 

http://www.techspot.com/community/topics/asus-x555ld-built-in-camera-not-working.212530/
Relevancy 17.2%

I have no clue if I'm posting this in the correct place but here it goes my Sell insperion laptop worked just fine as of a couple of days ago. We ended up connecting it to the Ethernet cord and it works. We've tried restarting it numerous times and it doesn't recognize any networks. Any suggestions?
 

A:Wi-Fi stopped working now only works wired

Have you checked under your Device Manager to see if the WiFi was disabled for some reason? Does your Dell have a physical WiFi button, and is it turned on? You could also go to the Dell website and download the WiFi device drivers for your specific laptop. Un-install the WiFi drivers, reboot and then re-install them.
 

http://www.techspot.com/community/topics/wi-fi-stopped-working-now-only-works-wired.212471/
Relevancy 24.94%

Alright I ll make it short but informative I can t connect cable able internet Only via to ethernet to connect to the internet without an ethernet cable I have tried pressing the laptop s quot WiFi quot button but nothing has happened The light didn t even change I have tried Only able to connect to internet via ethernet cable rebooting and going into BIOS to see Only able to connect to internet via ethernet cable if there was on option there nothing I Only able to connect to internet via ethernet cable have tried going into Device Manager and under quot Network Cards quot I got options I believe I had options though now I have only first I tried to deactivate it and the reactivate it but that just made it not work at all and when I got home and got my connection back I tried to update the drivers which is when I noticed I only had because I was at school when all showed up so I didn t have connection to update them but it just said that they were all up to date I have tried using the windows recovering tool to go back before the problem occurred Though I did get an error the first time due to my AVG being up so it couldn t complete but after that I tried doing it again with AVG off but the situation didn t change and I know the problem isn t with the router as the problem occurs with different WiFi s In the beginning it would only say quot can t connect to the internet quot over and over again but now it won t even show the available WiFi networks in the area Any help is much appreciated nbsp

A:Only able to connect to internet via ethernet cable

Any suggestions at all? if you require more information in order to come up with a solution, just tell me what you need an ill try my best to figure it out
 

http://www.techspot.com/community/topics/only-able-to-connect-to-internet-via-ethernet-cable.212310/
Relevancy 17.63%

My computer is able to connect to the internet through an ethernet cable, but no devices besides my tv is able to wirelessly connect at all. The internet doesn't even show in the Choose A Network tab on my Ipad.
 

A:WiFi isn't working but ethernet is

What is the make and model of the router or modem you are using? What type of internet connection do you have (DSL / Cable / Satellite / etc). What have you done so far to try to correct this problem (reboot equipment, change settings, unplug then re-plug equipment, etc.)? Need to provide more information before anyone can really try to help.
 

http://www.techspot.com/community/topics/wifi-isnt-working-but-ethernet-is.212323/
Relevancy 21.5%

I have a desktop computer that is running on Windows Xp, up until this morning, everything was fine, I could connect to the internet with no problem.

I turned on my computer, and it is telling me that the network cable is unplugged, as well as my network is not showing when i go to "my network connections"

But yet.....

I AM connected to my router, and there is no problem with the cord (I tried it on different computers as well as my Xbox 360 on the same port....so I know its not the router)....when I go into device manager, everything seems to be working correctly, and my network adapter and ethernet card both are marked as working properly.

Any ideas how I can fix this issue ?
 

A:"Network cable is unplugged" but its really not..

sadgyrl514 said:





I have a desktop computer that is running on Windows Xp, up until this morning, everything was fine, I could connect to the internet with no problem.

I turned on my computer, and it is telling me that the network cable is unplugged, as well as my network is not showing when i go to "my network connections"

But yet.....

I AM connected to my router, and there is no problem with the cord (I tried it on different computers as well as my Xbox 360 on the same port....so I know its not the router)....when I go into device manager, everything seems to be working correctly, and my network adapter and ethernet card both are marked as working properly.

Any ideas how I can fix this issue ?Click to expand...

Try rebooting,
 

http://www.techspot.com/community/topics/network-cable-is-unplugged-but-its-really-not.166539/
Relevancy 15.48%

Hello,

I own a custom laptop on an MSI 16F2 platform. Few weeks ago my GTX 670M card died.

Out of better options, I bought an used GTX 660M from an acquaintance.

I had it installed, started Windows and everything looked OK. Then I installed the Nvidia drivers and after reboot, right after the loading screen, I got a black screen (with the screen still lit).

I went into Safe mode and uninstalled the driver. Then installed again and got the same result. Went into Bios, change settings, tried resetting CMOS, nothing worked. Installed Windows 7 Ultimate again, then Windows 8, same thing. I also tried the driver modding instructions on this forum, still nothing.

I have no clue what is wrong. If you have any idea, please help me with this.

Thank you,

Fox
 

A:GTX 660M black screen after installing driver

I have connected the laptop to an external monitor and it works with the Nvidia driver installed. The laptop screen works just fine without the drivers. I would really appreciate any form of help. Is it maybe the BIOS?

Thx,
Fox
 

http://www.techspot.com/community/topics/gtx-660m-black-screen-after-installing-driver.211105/
Relevancy 13.33%

Hi my daughter tried to adjust the resolution and now the screen is Black and stuck on Out Of Range. I cannot even get it safe mode or anything. Just a black screen with the writting. It's a windows xp 32. My son is so sad if anyone knows what to do please help. Thank you.
 

A:PC monitor screen is black & says "Out Of Range"

Repeatedly press F8 while the system is booting.. The very first stuff you see on screen will either be your motherboard splash screen or some text. When you get to the menu where you can make a selection, choose VGA mode NOT Safe Mode. That will boot your computer at 640x480, but it will boot with full driver support, just as if things were normal. Change the resolution to what you want after that.

Remember if you change it to something that goes 'out of range' DO NOT touch anything for 15 seconds. It will revert back to what it was after that time and you can try again.

Unrelated.. Go to school at UMR? or different Miner?
 

http://www.techspot.com/community/topics/pc-monitor-screen-is-black-says-out-of-range.210867/
Relevancy 40.85%

Hi there,

The laptop I have is an asus P550C, windows 7.

This laptop came pre-installed with Mcafee Antivirus protection for a limited amount of time. Wifi was working perfectly fine although there were occasions where the connection would disconnect by itself. After the free-trial ended, I did not want to buy the packaged they were advertising so I went to my Control Panel and uninstalled Mcafee. This was when the problem started to occur. The internet access icon had a red x and when I went to diagnose the problem, it said that I needed to connect via an ethernet cable. Since then, I have connected it with an ethernet and internet works and I have also installed AVG's free antivirus software.

I have tried to
type: ipconfig /flushdns
type: nbtstat -R
type: netsh int reset all
type: netsh int ip reset
type: netsh winsock reset

But I still cannot connect via wifi. Please help
 

A:Wifi has stopped working but still able to connect to internet via ethernet cable

C:\Users\jay>ipconfig/all

Windows IP Configuration

Host Name . . . . . . . . . . . . : jay-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : vlan1.phub.net.cable.rogers.com

Ethernet adapter Bluetooth Network Connection:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Bluetooth Device (Personal Area Network)
Physical Address. . . . . . . . . : 54-35-30-05-36-68
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . : vlan1.phub.net.cable.rogers.com
Description . . . . . . . . . . . : Realtek PCIe GBE Family Controller
Physical Address. . . . . . . . . : BC-EE-7B-28-57-D7
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::9dfa:dcc6:3d3b:ae86%11(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.0.20(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : March-27-15 4:14:52 PM
Lease Expires . . . . . . . . . . : March-28-15 4:14:52 PM
Default Gateway . . . . . . . . . : 192.168.0.1
DHCP Server . . . . . . . . . . . : 192.168.0.1
DHCPv6 IAID . . . . . . . . . . . : 247262843
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-1A-51-D7-D4-BC-EE-7B-28-57-D7

DNS Servers . . . . . . . . . . . : 192.168.0.1
NetBIOS over Tcpip. . . . . . . . : Enabled

Tunnel adapter isatap.vlan1.phub.net.cable.rogers.com:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . : vlan1.phub.net.cable.rogers.com
Description . . . . . . . . . . . : Microsoft ISATAP Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes

Tunnel adapter isatap.{A9DA0935-EE1F-4A59-8A97-DDA13A7DFFEA}:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter #2
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes

Tunnel adapter Teredo Tunneling Pseudo-Interface:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
IPv6 Address. . . . . . . . . . . : 2001:0:9d38:90d7:2c47:1b6c:9c1d:d26b(Pref
erred)
Link-local IPv6 Address . . . . . : fe80::2c47:1b6c:9c1d:d26b%14(Preferred)
Default Gateway . . . . . . . . . : ::
NetBIOS over Tcpip. . . . . . . . : Disabled

C:\Users\jay
 

http://www.techspot.com/community/topics/wifi-has-stopped-working-but-still-able-to-connect-to-internet-via-ethernet-cable.210787/
Relevancy 17.63%

I have same problem Recently ISP have changed my ADSL working stops Wi-Fi router to vDSL modem WiFirouter I m using assembled service of internet IPTV and VoIP My LAN works perfectly but WiFi Wi-Fi stops working is giving me some hard time everything works nice and I m using internet on my laptop Lenovo t Win phone LG G andorid tablet iPad but day after all devices are showing that they are connected to WIFI but there is no or low internet response for example skype works but cant open some pages other are opening but some images don t load fb etc I can t log in into router to reboot it And this issue when internet isn t working normally but showing as connected persists on all devices I ve mentioned above But at the same time when internet isn t working when I try it on my desktop PC Win everything works normally Then I need to go to router turn it off then on and everything works perfectly sometimes for a day sometimes for a couple of days I ve tried everything changing IP lease time changing freq form to changing channels switching from b g n to N almost everything I could think of My WiFi is secured with WPA PWA -PSK-TKIP AES password and name is a simple one with char name My modem router information s are Device Type ZXHN H N Device Serial No ZTEEG E Batch No T HW Version V SW Version V L BOSNIA BOOT Version V do anyone have an idea what it can be the reason why this is happening nbsp

A:Wi-Fi stops working

NetWalker85. Since your desktop works when your wireless devices don't, it's not your Internet signal from your ISP. Your devices are showing the router's SSID which is being broadcast, but not the wireless internet signal from the router. I would reset the modem/router to it's default settings and change the necessary items (SSID and passwords,security settings, max number of IP addresses for the router to assign to devices,etc). if that was never done. If the problem is still there, I would request a new combo unit, or possibly see if there is a firmware update for that combo unit.
 

http://www.techspot.com/community/topics/wi-fi-stops-working.210644/
Relevancy 17.63%

Gateway NE56R41u laptop freezes after 5-10 minutes of running, ran many many tests and scans to try to find malware but nothing was found, it works fine in safe mode but not in safe mode with networking, please help
 

A:Gateway Laptop isn't working

When something works in Safe Mode but not while in Normal it points to a driver issue. Have you tried updating your WiFi/Network Interface Card (NIC) drivers for your system from Gateway's website?

Do you use a cooling pad? Laptops can get hot quickly and high temps will freeze/shut-down a system fast.
 

http://www.techspot.com/community/topics/gateway-laptop-isnt-working.209213/
Relevancy 15.48%

My newest task is centered around an HP Pavilion 15-p033ca laptop with a broken screen. Replacing the screen is actually super simple but my issue lies elsewhere.

Normally I would hook the laptop up to a monitor via VGA cable. This newer laptop only has an HDMI hook-up, so I hooked it up to my TV with that cable. The HP logo upon start up is semi-visible as the picture is distorted. So, before I spend money and order the screen my question is...

Does an HDMI relay the Broken screens picture to the TV and that's why is messed up? or should the TV picture still be clear? Like when a broken screen laptop is hooked to an external monitor with a VGA and the external monitor works fine.

I'm worried there may be an internal GPU or Mobo issue aside from the screen being broke.... Finally is there a better way I can test this instead?

Thanks for any info or Ideas in advance!
 

Relevancy 24.94%

I need the best and most compatible router for TWC?
I need the router to reach a very good distance (between 3 houses really close to each other). Or would it be better to get a booster?
 

A:Wi-fi router for Time Warner Cable

To share from house-to-house, you need a strong RF signal so look for MIMO Class routers with multiple antennas, three if you can find one. If the lot layout is like a triangle between the houses, one good router should work, otherwise when lined-up like a fence, you will need a repeater.
 

http://www.techspot.com/community/topics/wi-fi-router-for-time-warner-cable.209487/
Relevancy 15.48%

I am having an intermittent issue with my screen not waking up. It goes to sleep after 10 minutes normally but just occasionally it doesn't come back on. usually I have to reboot the pc. I tried a different monitor which worked fine, when I reconnected my normal monitor it also worked fine. The monitor power light flashes to indicate its in sleep mode but doesn't want to wake despite moving mouse or pressing keyboard. The graphics card is only a couple of months old and the screen is over 5 years old.
This problem only happens maybe once a month, the rest of the time it works as normal. Any suggestions gratefully received.
 

A:Intermittent blank screen

First, are you doing anything specific when this occurs, I.e. a particular game, video rendering, etc.? Second, is there dust build-up in your system? Check especially your video card fan.
 

http://www.techspot.com/community/topics/intermittent-blank-screen.209381/
Relevancy 17.63%

Hi when I applied some new Thermal paste to my rig I noticed that my case fan stop spinning after the POST test on bootup.
my build is.
G33MO3 Motherboard
E8500 CPU
EVGA gtx 650 GPU
250 Seagate HDD
Simple samsung Optical drive
430w corsair PSU
2x1Gb DDR2 RAM
I am running the latest version of BIOS for my motherboard (dell revision 1.0.15).
This is unfortunate as I was just about to overclock my system and now the only fan on my case has gone.
I know the fan works because during POST it spins up.
I've tried clearing the BIOS to default with CMOS but that did nothing but slow my computer down.
Thank you.
 

A:Fan not working and PC instantly slowed down?

Hmm, don't try clearing the BIOS, try looking through it, the fan might be disabled for some reason in there. Also, do you have any other places you could plug that fan into ( on the motherboard, or you could just use two wires to connect it to the PSU directly ? Also, make sure any fan-control or overclock software doesn't interfere.
 

http://www.techspot.com/community/topics/fan-not-working-and-pc-instantly-slowed-down.207984/
Relevancy 17.63%

It was like any other day while I was working on the computer while my PC suddenly shut down I tried turning it back PC working not GPU using on but nothing So I opened up the case and noticed that when I press the power button not even PC not working using GPU the motherboard fan starts spinning I stripped down everything from the system and tried running it It worked flawlessly So after putting everything back on one by one the culprit turned out to be the Graphics card The computer would turn on with the card inserted into the PCI slot Whenever I would place it in there not even connected with the VGA cable just plugged in the slot the motherboard would refuse to start up So I decided to check the GPU for cylinder holes but everything seemed to be intact no burnt smell or anything The PC works just fine with the integrated graphics Can it really just die like that without a proper reason It wasn t over-heating I had that one checked So what should I do right now I don t have a spare GPU to check if it s the PCI slot that s the problem or the GPU which was fine like minutes ago nbsp

A:PC not working using GPU

Hmm, what graphics card are you using ? It might be that your power supply lost it's wattage over time, and that it's now not strong enough to power it. How much W does your PSU give ?
 

http://www.techspot.com/community/topics/pc-not-working-using-gpu.209267/
Relevancy 25.8%

Would it work to plug it in from the pc to tv to watch ?
 

A:Appropriate cable?

Does the TV and PC both support VGA connection? If so then yes, but only if you don't have a digital connection to choose otherwise. If you have a DVI, HDMI, or Display Port to use instead, those would be preferable over analog signaling.
 

http://www.techspot.com/community/topics/appropriate-cable.209089/
Relevancy 17.2%

I have a HP HPE- f i quad core with a TB WD primary and a TB WD secondary that I ve had for about - years and have cloned the primary several times with no problems About - weeks ago I cloned the primary once again with another TB WD only to find that after the cloning the DVD drive stopped writing It actually begins the process but after writing the lead-in it simply sits there and spins heating the disk and of course making it unusable Once this occurs working DVD burner stoped after cloning it usually cannot be stopped by any means and the machine has to be hard rebooted to proceed Since the first cloning operation I have re-cloned the original using three different cloning programs all with the same result as well as cloning to a new TB WD drive with the same results I ve also replaced the DVD drive with two different known good drives one being brand new went through all of the HP troubleshooting procedures uninstalled DVD burner stoped working after cloning the drivers and re-installed them deleted the high and low files from the registry etc with no success The strange thing is that if I use the original hard drive along with the cloned drive I can boot off the original and burn to the same DVD drive with no problem I can also write CD s with both the original and the clone both audio disks and data disks I ve also ran the DVD drive off from one of the other SATA ports on the mother board along with replacing the cable I even took the computer into a computer shop and they worked on it for over days and could not identify the problem To make a long story short this problem is just about ready to get the best of me I ve ordered an external DVD drive believing this will work but I would really like to determine why it is doing what it is doing The cloning should not have caused it but seems to be the only thing that is common to the problem I would really appreciate any incite that you may have nbsp

A:DVD burner stoped working after cloning

The only suggestion I can think of is some type of burning software is broken with the Cloned OS. If you have any software installed that handles the burning (include Roxio, Creative and all others) Remove them and the Registry files related.

I suggest using Revo Uninstaller as it will automatically search out and tell you whats left over, and let you delete them or save them. I suggest deleting all files/folders and registry items left to ensure they are not somehow causing the issue.
 

http://www.techspot.com/community/topics/dvd-burner-stoped-working-after-cloning.208883/
Relevancy 15.05%

Hi, am prepared to be labelled "thick as mince" however I wonder if anyone can advise how to proceed with the following: Replaced cracked laptop screen on a TM99, on first start up after replacement, the screen worked.....woohoo!, however.....on next startup, there was nothing, no lights, no start up screen...nada. Replaced new with original screen, which although cracked had worked, and it too now failed. Any ideas? The cable for the screen was seated properly and securely, nothing else was moved so am struggling to establish a reason for this non conformance. Could it possibly be a jammed "lid closed" switch? If this is potentially the culprit, anyone know whereabouts it is? Thanks
 

http://www.techspot.com/community/topics/packard-bell-tm99-laptop-failed-screen-replacement.208913/
Relevancy 16.77%

Hey,

Yesterday, I was working with my PC while my 1TB Seagate external hard (http://www.amazon.com/Seagate-FreeAgent-Ultra-Portable-External-STAA1000101/dp/B0045JLPMO) was plugged in via USB. The USB connection was a little bit loose.

Then when I was plugging a USB flash memory in, I noticed that the external hard was disconnected.
I connected it again, but it didn't appear in My Computer.
Here is the state in Disk Management and Device Manager:




After that, I plugged out the "SATA to USB converter" from the hard and connected it directly to SATA cable inside the PC case (like internal HDD), but this time nothing showed up in Disk Management, Device Manager and BIOS. However, it took a long time for the system to boot.


I searched and read lots of threads and tested some other stuff:





(It didn't appear in Minitool Partion Wizad).

I've got a lot of data on this HDD which really matters to me.
Any help is really appreciated.
 

A:FreeAgent 1TB External Hard stopped working (unknown, not initialized)

Hi there Sedhadi,

If your HDD is failing the manufacturer's tests it is probably dead. IF you need to get your data back look for a reputable data recovery company in the area.
Hope that helps.
 

http://www.techspot.com/community/topics/freeagent-1tb-external-hard-stopped-working-unknown-not-initialized.208828/
Relevancy 15.48%

I am getting White Horizontal line on top of the screen.
I plugged out signal cable, those white horizontal line is gone. but I plug in switch cable, horizontal line appearing on top of the screen, so what's causing this?
 

A:White Horizontal line on top of the screen

Could u give some specs what monitor and video card, what operating system? what computer?
 

http://www.techspot.com/community/topics/white-horizontal-line-on-top-of-the-screen.208508/
Relevancy 15.48%

Hi, I have a Toshiba Satellite Pro C660 with a blank screen. The laptop starts up and goes through its boot cycle fine, but nothing is displayed on the screen.

I've read through tons of forums, but nothing seems to work.

I did the whole removal of battery, power supply and holding the power button for 60 secs... still blank...

When plugging in an external monitor it works perfectly fine, so this eliminates any issues with the CPU / GPU / RAM / HDD, etc.

I re-installed windows 7, which would hopefully eliminate any software issues.

Next logical step was to check the LCD backlight, inverter and ribbon cable... So I replaced the screen, but still blank screen. Just as a side note, the backlight lights up with both old and new display, but no picture.

This leaves me to think that it might be something in the BIOS?

Any suggestions / ideas?
 

http://www.techspot.com/community/topics/toshiba-black-screen-problem.208461/
Relevancy 15.48%

Hi there! I'm using HP presario c700 . During few days I'm going to see display is not working properly. I mean I can't see anything without sound, It's display is going to show a black shadow with some scratchs.

Please anyone say something, what should I do?
 

A:Laptop Screen Problem

Hi there, have you tried hooking up to an external monitor? This will help you determine if it's a problem with the screen or logic board.
 

http://www.techspot.com/community/topics/laptop-screen-problem.208402/
Relevancy 15.91%

After 3 days of not using my pc(due to broken psu) after I replace with a new psu my screen is so dim tried everything from replacing wires,adjusting brightness,replacing hardwares to replacing monitors but the problem still persists I dunno what the problem is can someone help me. thanks in advance
 

A:Screen too dim

Information needed: Make and Model of computer / motherboard / video card / monitor / etc.
Cannot help if no information is available about what you are using. What Operating System are you using?
 

http://www.techspot.com/community/topics/screen-too-dim.208130/
Relevancy 16.77%

Hey, I'm a new member here with a problem!

I have a pair of Skullcandy Crushers with an arguably great built-in mic that turn on with a press of a button. However I built a new computer a few days ago and installed the latest version of the ASUS Realtek HD Audio manager, and while the audio on the headphones work, the mic refuses to work and isn't even recognized on programs like Skype and Hangouts.

I have tried the front two ports and tinkered with the settings and nothing has worked as of now, please help ASAP!

-Extabyte
 

A:Skullcandy Crusher mic not working with ASUS Realtek HD Audio Manager

Yeah thats because Skullcandys aren't really built for computers, just iPhone & Android. I had the same issue with my Skullcandy headphones and decided to buy a legit for PC headset. Sorry you spent your money on them!
 

http://www.techspot.com/community/topics/skullcandy-crusher-mic-not-working-with-asus-realtek-hd-audio-manager.204154/
Relevancy 15.48%

Have an unusual mark on screen at startup then green lines and pink but otherwise pc ok cannot upload jpeg image for some reason
 

http://www.techspot.com/community/topics/screen-issue-dell-1520.208131/
Relevancy 15.48%

I have a Packard Bell Easynote TE69KB laptop and the screen is either black or very dark, sometimes at the right angle you can just see the graphics, This started after the 18mth old son hit the top of the screen yesterday. I have tried adjusting brightness without change, with an external monitor plugged in it works fine, which is OK if I'm working at home but no good when I'm out. I am thinking I'm going to have to change he screen or can you make any other suggestions?
 

A:Very dark or black laptop screen

Your son has probably damaged or loosened the screen inverter. That is what lights up the screen and is a separate part. It can be found under the screen bezel. I don't think that this will cost much to fix. If you DIY read up about the job first because removing the bezel (frame) needs to be done carefully.
 

http://www.techspot.com/community/topics/very-dark-or-black-laptop-screen.208064/
Relevancy 24.51%

So I have a Toshiba Portege r500 with no H/d & a second one for parts. When I went to take the H/D and pop it in I realized the H/D hook-up cables are different. The "parts laptop" has a "FMUSH1" cable connecting it to the sata drive. The newer Portege has a cable labeled " FMUPH2" (I'm assuming for an SSD?)

My Question is....Can easily swap them somehow or is there an adapter/converter possibly?

Thanks in advance for any possible help!
 

A:Fmuph2 HDD Cable Issue (Toshiba Portege R500)

So with more research I'm thinking I have a ZIF Tape (Cable) that previously connected to a 1.8 SSD which I now need to convert to a 2.5 sata connection.
I ordered a 24-Pin ZIF to SATA Adapter Connector Card off eBay. It comes with its own "ribbon" (Tape/cable whatever) as shown in the pic. Will I need to replace the ZIF from my mobo with it? or is it simply in case "you" need it?
Also just wondering could I have swapped out the sata ribbon (Fmush1) with the ZIF ribbon (Fmuph2) where they connect to the MoBo instead? (It's extremely difficult to get to on this model and the "clips" seem very fragile so I avoided attempting it)
 

http://www.techspot.com/community/topics/fmuph2-hdd-cable-issue-toshiba-portege-r500.207530/
Relevancy 16.77%

hi guys wish you all a great new year.

im facing a very annoying issue with my laptop, some keys are not working, the left **** and the windows key I just don't know whats happening.

can someone please help mw with that.

thanks in advance.
 

http://www.techspot.com/community/topics/dell-inspiron-7537-shift-and-windows-key-not-working.207933/
Relevancy 17.63%

Sometimes when I'm skyping, I want to play audio so I enable my stereo mix. I got a new computer though so I had to re install the realtek high definition audio recording. I've tried using it, but it doesn't work. It says it's enabled and it's my default device, and no green bars pop up to indicate it's working either. Any help would be cool, thanks.
 

http://www.techspot.com/community/topics/stereo-mix-enabled-but-not-working.207783/
Relevancy 15.48%

I come here in need of some help I ve been troubleshooting this issue for quite some time and have not been able games goes while few a for seconds playing Screen black to find the solution on my own The issue Sometimes when I play games my screen Screen goes black for a few seconds while playing games will go black at a random time for a a period of time sometimes only lasting - seconds other times lasting up to a minute and then recovers itself and I m able to continue playing The sound continues playing during the black outs but I have no control of my computer Can t see anything and cannot use commands like ctrl alt del Sometimes when my computer recovers from the black screen I can hear the fans on my GPU boost up to about I have setting in MSI afterburner to Screen goes black for a few seconds while playing games increase my fan speeds as the temperature of my card goes up Sometimes when recovering from a black screen my fans will go up from to like Then it stays at for the remainder of the time until I reset my computer Once my computer is reset my card will run at the again Background and computer information This issue did not start happening until I installed and new graphics card and reinstalled windows The GPU was tested before I reinstalled windows and everything ran perfect no blackouts I reinstalled windows because I got an SSD here are my specs as of now CPU FX- MOBO Asrock Extreme RAM gb DDR and gb DDR SSD gb w windows installed on it GPU Radeon r upgraded from a radeon which ran perfect PSU w Corsair few last things to add that may be helpful - I have not experienced any black screens when using my computer and not playing games - I typically play low-end games like league of legends which aren t too intensive on the gpu - When I load into the UEFI my RAM displays as all sticks running at MHz Even though of my sticks are - my gpu has never gone over degrees since ive installed it so I dont think its an over-heating issue If you need any other information let me know and ill be happy to provide it Any help will be EXTREMELY appreciated I m going crazy right now because I can t figure this thing out lol Thanks so much - Nick nbsp

http://www.techspot.com/community/topics/screen-goes-black-for-a-few-seconds-while-playing-games.207781/
Relevancy 25.8%

I am trying to connect my laptop with an external monitor through vga The good thing is that all VGA cables work And by work I mean I see image on the external screen many Vga are How there? cable. configurations BUT I have noticed something else On pin of the cables I bought I found out that pins and are Vga cable. How many configurations are there? interconnected short circuited On an another pin cable pin is missing non of the pins are Vga cable. How many configurations are there? interconnected How does that affects anything Well if I install the pin cable my external monitor is recognized for what it is LG Vga cable. How many configurations are there? l bla bla Also from within the Intel graphics control panel I am able to access many of the monitor features such as brightness contrast etc And I am not talking about the emulated gpu features I am talking about native monitor settings as if I was controlling them from the screen menu Now if I install the other cables pin pins connected my monitor is recognized as generic non pnp monitor and non of these functions are available PLUS when I turn my laptop off screen does not go into power saving mode but stays on complaining about signal error I searched around and found a number of diagrams and pin configurations It seems that the standard vga cable is nothing but standard I also run into posts of people with similar problems Can someone provide a short explanation Why not all vga cables are the same And in my case how do I know what cable to use So far I ordered from e-bay and all came with pins and connected They work but not with the extra features and that is somehow an inconvenience Thanx My Monitor is Lg Flatron L QTQ-SF And the laptop is Samsung NP V A- S GR nbsp

http://www.techspot.com/community/topics/vga-cable-how-many-configurations-are-there.207565/
Relevancy 17.63%

I'm doing a simple build for my parents and when I boot it up the monitor doesn't respond. Everything is hooked up properly and I've tried a different monitor.
Processor - i3-3240 with hd 2500 integrated graphics
Motherboard - ASRock H61MV-ITX
 

A:Integrated graphics not working

Issue resolved. Sorry I dont know how to delete the thread
 

http://www.techspot.com/community/topics/integrated-graphics-not-working.207495/
Relevancy 22.36%

This is my configuration:
GPU - ATI Radeon HD 5770
STOCK COOLER
MONITOR 1280X1024 4:3 Ratio
CPU - AMD FX-8320
Motherboard - Asus M5A97 R2.0
RAM - Kingston HyperX 2 x 4 GB DDR3 1600 MHz
Hard Drive - Western Digital 1TB Blue SATA3
PSU - Thermaltake Smart SE 530W

Now, what should I buy:
1) New cooler - Probably the COOLER MASTER HYPER 212 EVO
2) New GPU - any good suggestions?
3) New Monitor - any good suggestions?

I'm using it for video rendering and gaming.
 

A:What should I change on my PC with $250?

I would not worry about the CPU because it is a decent processor. The cooler I would not worry about unless you are overclocking the CPU. If you are then yes, get the Cooler Master Hyper 212 EVO. It will bring the temps down a good amount over the "Stock" cooler. I would suggest getting a monitor (something with Widescreen and 1920x1080 resolution). You could probably get a decent monitor for around $100 to $150, then look at getting a better graphics card. You may have to save a little extra money for the graphics card, but it will be worth it in the end.
 

http://www.techspot.com/community/topics/what-should-i-change-on-my-pc-with-250.207425/
Relevancy 22.36%

Please somebody help me asap I tried to change the public Dns to google's one but failed to do so now I cant reverse it I clicked auto obtain IP and Dns but still cant connect to my router, I beg you somebody help me.
 

A:DNS change failed

I'm far from an expert on anything internet, but I had a similar experience when Verizon changed servers on me, and my router failed to track it.

I called Verizon tech support and they reconfigured the router for me while I was on the phone.

You can also try opening a command box and type, "ipconfig/release", wait a few moments and type, "ipconfig/renew" (obviously without the quotes). That will only work if the issue is with the computer, but not the router.

Don't despair though. Someone who actually knows what they're talking about could be along any minute...
 

http://www.techspot.com/community/topics/dns-change-failed.207375/
Relevancy 32.68%

I just purchased screen quot DELL U H quot and a new computer The happy unboxing time turned to a nightmare when the noob I am could not connect the screen to the computer like the guy is doing in the youtube video Thanls Screen Info http accessories us dell com sna productdetail aspx c us amp cs amp l en amp sku -BBCG What I am trying to do This guy is connecting his screens to each other than to the PC but I am unable to achieve it 3 station configure screen my working Can't My Computer Spec Asus ROG G Desktop PC i Can't configure my 3 screen working station GB TB NVIDIA GTX - CPU Intel Core i - M Cache up to GHz - VGA NVIDIA GTX GD - OS Windows - Memory G DDR MHz - Storage TB SATA G ASUS Can't configure my 3 screen working station westorage years - ODD Blu-Ray X Combo - LAN Mbps - Audio -channel Audio SonicMaster - Card readerN A - Front I O - USB x - Mic Port x - Earphone port x - back I O x RJ LAN x HDMI-Out - x channel Audio - x USB x USB - x Power jack - power supply WAdapter - certificates BSMI CB CE FCC UL CCC Energy Star VCCI Graphic Card Spec http www asus com Graphics Cards GTX PHOC GD specifications nbsp

A:Can't configure my 3 screen working station

As far as I can tell, Nvidia doesn't support Surround (three monitors) via daisy-chaining (the card in the video was AMD Radeon). You might be able to get two monitors to work like that - some sort of DisplayPort MST support was added a while ago because of tiled 4k displays - but to get them all working they need to be plugged to the card directly.

As GTX750 doesn't have proper connectors, you might need to change your graphics card to something that has three DP outputs or 2xDP + HDMI.
 

http://www.techspot.com/community/topics/cant-configure-my-3-screen-working-station.206802/
Relevancy 24.94%

Hey guys, my laptop asus stopped working with wifi connection and I was just reading some posts here about this same problem but didn't find how to fix it.

I was uninstalling some programs from my pc but I didn't uninstall programs named "something wireless". I just took off what I knew I could.

I also tried the option "solve problems" in the wireless pc symbol and the answer was to connect my laptop to an ethernet cable...that never happened. Just now.

Does anyone knows how I get back my wireless connection? Pleasee
 

A:WiFi doesn't work only with cable ethernet

Powercycle the modem and router. Here is a specific order if you have a separate modem and router.
1. Shut down all PC's.
2. Shut down the Modem and router.
3. Power on the modem only. Wait 2 minutes or so.
4. Power on the router. Wait 2 minutes or so.
If you have a modem/router combo, then you don't need step 4.
5. Boot up the PC and see if you can connect.
 

http://www.techspot.com/community/topics/wifi-doesnt-work-only-with-cable-ethernet.207136/
Relevancy 15.48%

I run two displays. When I got up this morning, one of them is on but black. When trying to adjust my display settings, it comes on briefly (maybe 3 seconds) and goes right back off again.

System specs are as follows:

Operating System
Windows 7 Home Premium 64-bit SP1
CPU
AMD Athlon II X2 255 45 C
Regor 45nm Technology
RAM
4.00GB Dual-Channel DDR3 @ 535MHz (7-7-7-20)
Motherboard
eMachines EL1352 (CPU 1) 49 C
Graphics
VE205 ([email protected])
VE205 ([email protected])
256MB NVIDIA GeForce 6150SE nForce 430 (Acer Incorporated [ALI])
Storage
465GB Western Digital WDC WD50 00AAKS-22V1A SCSI Disk Device (SATA) 48 C
Optical Drives
ATAPI DVD A DH16ABSH SCSI CdRom Device
Audio
USB Audio Device

Using Sabrent USB-DH88 USB Display Adapter also

I have checked all drivers and windows shows they are up to date. Both displays were fine as of about 1 AM this morning, and to my knowledge no updates or downloads were done during this time.

Any help would be appreciated; I work from home and having dual monitors is almost critical.
 

A:2nd display black screen

Try changing cables first, by some chance the cable has gone bad.

Sounds like it could be a lighting issue within the monitor. If it is a backlight issue, the monitor will still be displaying an image. You will not be able to see the image without some kind of lighting. If you can use a flashlight to expose the image, you would at least know it is a backlighting issue. I've been able to use this technique on phones as well as monitors.
 

http://www.techspot.com/community/topics/2nd-display-black-screen.207214/
Relevancy 21.5%

Hello all,

I use an ADSL modem for accessing Internet in my home. I think my wifi password is stolen. I wanna change it but I have a computer only in my office and use the Internet in my home by my iPhone. Is there a way to change that password with my iPhone or should I surely use a computer to do that work, please?
 

A:How to change the Wifi password of an ADSL modem without a computer

Hello abbasi ,
You can use your iPhone to log in the router and change the wireless settings, however this isn't usually recommended. If something goes wrong when configuring the wireless settings and you are not able to connect to the router you'll need a device that can be connected via Ethernet cable to restore the access.
If this router is supplied by your ISP you can ask them if they have remote access to it to change the password.
Hope that helps.
 

http://www.techspot.com/community/topics/how-to-change-the-wifi-password-of-an-adsl-modem-without-a-computer.207093/
Relevancy 16.77%

Hello hello After having a problem with my cd dvd drive I rebooted my computer and did a clean install of Windows from my Vista So right now I m running Windows Windows not install (Touch/slider) FN - 7 Clean Keys working I have a VAIO - VGN-CS J Windows looks and feels great so far The only problem is my little sliding touch pad at the top doesn t work I don t know if it s FN keys but on top of my keyboard there s a little sliding touch pad for volume along with a fast forward rewind key I used to be able to slide the volume up from there but now it s not working I looked it up and I know this has to do with my clean install of windows I tried installing a bunch of drivers like everyone said online Sony Shared Libraries Vaio Event Notebook Control Device And a bunch of other drivers that people talked about I don t know what s wrong but it s still not working so I did a system restore to before I installed everything so that I can have a clean slate Can someone please help me fix my volume control slider please Thank you so much nbsp

A:Clean install Windows 7 - FN Keys (Touch/slider) not working

Laptops have extras over and above Windows and if you reinstall the OS or upgrade it you lose these. I've been there and done that with the FZ. It was broken when I bought it and the hard drive had been removed. Fixing the computer was very hard, installing Windows 7 was easy. Afterwards, like yourself I found that the function keys didn't work. Trawling forums and looking for drivers then sorting it out took ages and that was the most challenging part of the whole exercise. Everything necessary was on the Sony support sites but these were not user friendly and I needed to use several Sony sites. Needless to say Sony support were clueless. In the end I got everything functioning but if you can manage with things as they are I'd not bother. One tip, although it might not work with your particular Vaio model is that stuff has to be installed in a particular order otherwise some keys don't work.

That'll teach you to mess with Windows when a cd/dvd plays up.
 

http://www.techspot.com/community/topics/clean-install-windows-7-fn-keys-touch-slider-not-working.207046/
Relevancy 17.63%

My wireless is not working on my computer, just a couple months ago I reset my computer using the ISO file, now my computer will only connect to the Ethernet cable. The wireless switch is on. I see a button near the VAIO button that shows a computer with signals coming off of it, I've tried pressing it but it doesn't do anything. Computer specs: VAIO Song Laptop with 6 GB Ram and 1 TB HDD.
 

A:Wireless network not working

Sounds like when you reset your computer the proper wireless drivers were not re-installed. I would start looking for a solution for this. What Operating System does it have (Windows 7 / Windows 8.1/ etc.)? Have you tried to remove the Wireless drivers and re-install those? How about downloading and installing updated drivers from the VAIO website?
 

http://www.techspot.com/community/topics/wireless-network-not-working.206511/
Relevancy 15.48%

So recently my laptop computer s screen has been exhibiting very odd behavior At random times and puslates out Laptop spazzes screen at random intervals the screen will suddenly begin to pulsate and Laptop screen spazzes out and puslates quot spazz out quot if you will The spazzing is a burst of bright pulsating pixels that either partially or completely obscure the picture on the screen When this first started happening they never lasted for more than a fraction of a second but they are becoming much longer There seems to be nothing that I do in particular that causes this It doesn t necessarily happen when I for example play a game with intense graphics Nor does it necessarily happen when my computer is hot I have a core thermometer installed to prove this It doesn t seem to specifically be caused when I move the computer around Recently the quot attacks quot have been getting more frequent and more violent but I m just not sure what causes it An attempted screenshot of the issue returned a normal-looking screen so I don t think it s a virus Here s a YouTube link to a video I caught of it The pulsating starts at Sorry about Brand New in the background Computer Model ASUS Notebook K E Processor Intel R Core TM i - M CPU GHz Installed Memory RAM GB GB usable System type -bit Operating System Thanks for your help nbsp

http://www.techspot.com/community/topics/laptop-screen-spazzes-out-and-puslates.206769/
Relevancy 17.2%

I have bought JBL Speaker FLIP Model FHP 2 on 14th July 2014 but it worked for only 2 to 2.5 months thereafter not working anymore.
I have taken to SPAR Artee Industrial on 29/09/14 but they are not providing free replacement not they are able to repairs as Charging PIN has spoiled. THe part is not available locally. The JBP Speaker are not working at all now.

Kindly suggest, for the Customer Care Complaints I am unable to find the Customer Care/ Replacement Customer Care / Service Center / Top Management Contact numbers for getting help for repairs / replacement.
 

http://www.techspot.com/community/topics/jbl-speaker-not-working-in-just-2-months-time-period.206690/
Relevancy 27.09%

Hi. New guy here. I'm an oldtimer...cut my teeth on tubes and ended up as a 2-way radio and power plant tech. Retired at that point and didn't keep up much with the digital age. I have a compaq fp5315 computer monitor with an audio problem....either lots of noise when volume is normal, or at times no noise, but very low volume. Can't find any scematics and don't want to tear it apart until I know a little more about where to look. Is the audio board in the monitor or in the computer tower? The connecting cord checks ok and the usual plug-wiggling doesn't make any difference. If the audio board is in the tower, is the audio coming from the tower a normal low-impedance speaker feed or like a 600 ohm? Don't think it's just a simple speaker problembecause it has two speakers and both sound the same and the odds are that both wouldn't be bad.
 

http://www.techspot.com/community/topics/monitor-problem-with-compaq-fp5315.206548/
Relevancy 15.48%

My laptop goes into sleep mode even on slightest jerk applied on screen to rotate it,what possibly could be wrong, and on repairing how much could it cost
 

A:Laptop going into sleep on bending the screen

Sounds like a fault somewhere in the wiring (or a "switch" that is located inside the hinges for the laptop screen. Not 100% sure but without knowing make and model of your laptop, it is my best guess.
What you can do is the following:

Select "Power Options" in the "Control Panel" list.

Click the plus sign next to "Power buttons and lid" to expand its sub-list.
Click the plus sign next to "Lid close action" to expand its sub-list.
Click the word "Sleep" to open a drop-down menu next to the power plan you wish to adjust (e.g. Plugged In). Select "Do Nothing" from the drop-down menu.
Click "OK" to save your settings and exit the window.
This should disable the sleep option, then you wont have to worry about it until you can get it fixed properly.
 

http://www.techspot.com/community/topics/laptop-going-into-sleep-on-bending-the-screen.206467/
Relevancy 21.5%

I have a Dell Latitude D630 and the motherboard died, It's out of warrenty so I bought a Motherboard on ebay. The Bios Service Tag does not match the number on the bottom so I would like to chage it to the correct one. How can I do this?

I read about a DST CD = Dell Service Technician CD that has this option but I can't find one.

It's not a real important thing but when I use the Dell System ID application it reads the Bios Service tag and not the real system tag that Is registered to me.
 

A:How to change the Service Tag in a Dell Latitude D630 BIOS

http://en.community.dell.com/support-forums/laptop/f/3518/p/19258463/19430485.aspx
 

http://www.techspot.com/community/topics/how-to-change-the-service-tag-in-a-dell-latitude-d630-bios.165117/
Relevancy 17.63%

My old computer is crapping out and yes I know I need a new one. But in the meantime, it is telling me I have no soundcard. I am attaching my dxdiag report... Please help...
 

A:Sound card not working

Go to device manager and check if there is a yellow exclamation mark in there.
 

http://www.techspot.com/community/topics/sound-card-not-working.204903/
Relevancy 15.48%

Just bought a 980, now all I get is a black screen no matter what GPU I use.
Here are my specs:

Operating System
Windows 8 Pro 64-bit
CPU
Intel Core i7 4770K @ 3.50GHz 25 C
Haswell 22nm Technology
RAM
16.0GB Dual-Channel DDR3 @ 800MHz (9-9-9-24)
Motherboard
MSI Z87-GD65 GAMING (MS-7845) (SOCKET 0) 30 C
Graphics
L204WT ([email protected])
Intel HD Graphics 4600 (MSI)
Storage
465GB Samsung SSD 840 EVO 500GB (SSD) 28 C
119GB SanDisk SDSSDHP128G (SSD) 28 C
1863GB Seagate ST2000DL003-9VT166 (SATA) 28 C
1863GB TOSHIBA DT01ACA200 (SATA) 30 C
Optical Drives
CZYJMF MJW5MF4 SCSI CdRom Device
PIONEER DVD-RW DVR-221L
Audio
Sound Blaster Z

I had an EVGA 780TI working great. My 980 arrived so I swapped. All I got was a black screen. After taking the card out and putting it back in a few times nothing changed. Giving up I put my 780ti back in and now that just gives me a black screen too.

Any ideas?
Thanks

Edit: My mobo gives the code A0 which is normal so I don't think it detected anything was wrong.
 

A:Just bought a 980, now all I get is a black screen no matter what GPU I use

If your not getting an error code its probably booting up normally. It maybe defaulting to the integrated card for some reason so I would try plugging onto the on board video when booting to see what happens.

If that is the case you will just have to go into the bios and change your default video card to the PCIE.
 

http://www.techspot.com/community/topics/just-bought-a-980-now-all-i-get-is-a-black-screen-no-matter-what-gpu-i-use.205925/
Relevancy 15.48%

A few days ago my laptop started doing something weird - I would watch a video on YouTube or browsing the internet when my screen would glitch out and then I am not able to do anything. Most of the times the laptop will keep on running but the screen is frozen. Yesterday I even got blue screen after that happening.

Those are the specifications. I am using Windows 7 Proffesional. My GPU is Nvidia Geforce 525M 2GB + The the graphics card that comes with the processor
 

A:Laptop screen glitches

What antivirus program are you running?
 

http://www.techspot.com/community/topics/laptop-screen-glitches.205605/
Relevancy 17.63%

I have a sennheiser HD 202 and I am not able to hear any sound from the right side. I have to hold the cable in a position rhen it works. So what shall do now? Is there any chance of bringing it to normal state?
 

A:Sennheiser HD 202 sound not working

It's probably one of the wires inside the headphone lead has broken.
Does the same problem happen on all devices you plug the headphones into?
Or just one thing, say your PC for instance? (could it be a laptop headphone socket?)
If the problem is with all devices, ipods, pc's etc, then it's the headphone lead broken inside. If you can solder small wires and parts, you could change the lead yourself, but if the headphones are less than a year old you should return them under guarantee.
 

http://www.techspot.com/community/topics/sennheiser-hd-202-sound-not-working.205645/
Relevancy 17.63%

Okay, so yesterday I was dropped off for my first day at Uni and I went into my room to set up my laptop. Somehow (truly a mystery) a single tear fell onto my keyboard, right in the gap below the space bar. Obviously, I thought nothing of it... for about a minute. Then suddenly my keyboard went absolutely crazy. The space bar stopped working and when I tried to type with any other key, weird stuff happened. For example, I would type "B" and instead it would come up as "###O'xnF."

As you can imagine, very weird. I left it for a little bit while I unpacked and when I came back to it, it seemed to have settled down, but some of the keys had stopped working all together. These include the space bar, the z, the s, the shift key, the left alt key etc. Basically, several on the left side of the space bar. I am having to use a USB keyboard but obviously I would rather not have to.

Does anyone know how to fix it, or should I lug it over to the nearest computer repairs place?
 

A:Laptop keys not working

"Does anyone know how to fix it, or should I lug it over to the nearest computer repairs place?"... Tears contain salt, salt is corrosive. Yes, take it to a repair place and tell them what you told us
 

http://www.techspot.com/community/topics/laptop-keys-not-working.205454/
Relevancy 17.63%

Hi, can someone help me get my Soundblaster Zx beamforming mic to work as it is advertised to please. People can hear my game in the background and they shouldn't be able to.

I'm running Windows 8 64 bit.

Thanks
 

A:Soundblaster Zx Mic not working as described

Just to confirm, have you enable beam-forming in mic properties?

go to sound control panel, select recording devices, then highlight your soundblaster and right click to properties and find enhancement tabs. alternatively you might also want to try "setup microphone" inside windows. im not sure what it is named in windows 8, but in windows 7 that's what you need to type inside the start search box.
 

http://www.techspot.com/community/topics/soundblaster-zx-mic-not-working-as-described.204584/
Relevancy 17.2%

I bought new computer 1 year ago and everything went really nice until 10 days ago my graphic card fan stops working at times. At first I didn't know what was going on but I decided to open my case and start playing some really required game like WatchDogs and I noticed this. The fan stops working only when I play games. I updated my drivers but that didn't solve anything. I don't know why this is happening or how to fix it. I can tell when the computer is going to shut it self down because of overheating so I quickly alt+f4 my game whenever I see its going to happen. And I stare at the fan hoping that it will start working on it self again. I try to push it with my fingers but it wont continue. Only after 5-10 minutes pass I can move it with my fingers and it will start spining again.

What do I do?
 

A:Graphic card fan stops working.

When the fan is spining everything is working fine. And when it start spining again the temperature goes down fast.
 

http://www.techspot.com/community/topics/graphic-card-fan-stops-working.205181/
Relevancy 15.48%

I am now working on a ASUS G jh I ll describe the problem from when I first acquired the laptop The laptop started up with a blue BIOS background eventually the OS started Very lightly and blue tinted After playing around I discovered that the problem was intermittent when changing the elevation of the LCD lid I ordered NEW LCD Video Cable For Asus G G JH G JW G J G SW SERIES - Q ASA http www ebay com itm trksid p m l amp ssPageName STRK MEBIDX IT thinking this would fix the problem It did not Since then I have tried one different LCD panel and get the same results Now the problem is no longer blue It s just dark very very dark I can see that it still sends the image to the screen but it looks at if it s Asus G73jh problem screen the older LCD panels with the backlight disabled I know that this does not have a backlight or inverter though I have reinstalled Windows reinstalled the drivers reinstalled CCC still having issues maybe this is related AMD Catalyst fails to load properly The error message is quot Catalyst Control Centre Command Line Interface has stopped working quot It seems maybe there is something wrong with the graphics processor but I currently have a monitor connected through VGA and have also tested the HDMI output and both work fine I have been using and testing this system Asus G73jh screen problem with the external monitor since I have disassembled the laptop to replace the LCD LED cable I no longer have the old cable Anyone with any tips I would really like to figure this out if not for a working laptop for the curiousity of knowing what caused the problem Please help I will appreciate it very much nbsp

A:Asus G73jh screen problem

Is the display panel an LCD or LED type? Many LCD laptops can be converted to LED by using a simple flat cable adapter...
 

http://www.techspot.com/community/topics/asus-g73jh-screen-problem.205184/
Relevancy 17.63%

I have this flash drive:
http://www.amazon.com/PNY-Turbo-Performance-Drive-P-FD128TBOP-GE/dp/B00FE2N1WS

And I am afraid it is dead. When I plug it in, 50% of the time, the red light constantly flashes at about 8 flashes a second, or flashes 3-4 times quickly before just shutting off and nothing happens.

If it is in constant flashing mode, I can open my windows explorer and see "Removable disk", however it is slightly transparent, and when I try to open it, it says "Please insert a drive", which leads me to believe the computer detects it, but can't read it. The properties window shows 0 bytes. Is there any hope at all of getting my ~65gb of used data off of this thing at all? Do I have to take it apart and do some soldering? Please help.
 

A:PNY 128 GB Flash Drive not working

Your flash drive probably has a damaged controller. If that data is important, best chance of retrieving your data would be a professional data recovery service. The cost of recovery depends on how extent is the damage of your disk.
 

http://www.techspot.com/community/topics/pny-128-gb-flash-drive-not-working.204524/
Relevancy 21.93%

I'm a new Plusnet customer and I cannot connect to the internet using wifi I just get a page saying the broadband is down. So I tried using an ethernet cable and after manually setting this up I can use the internet. I accidentally disconnected the cable yesterday but the internet didn't fault, it's now working wirelessly. I can connect to the wifi using my mobile and iPad but I cannot connect to the internet. A new router has been sent and the problem still persists, a bt engineer has also visited but cannot find a solution.

Can anybody please help me?
 

A:I can't connect to wifi but connect with an Ethernet cable works, even when it isn't plugged in

It gets confusing as to which device is being used so as a guideline
disable one or the other (wifi vs wired) and don't allow both to be active at the same time. Technically, which ever device gets an IP address from your router will become the gateway to your ISP - - ignoring the connectivity of the second device to access your router.

With a laptop, we just toggle the keyboard to enable/disable wifi and the wired is easy - - just pull the cable out.

create a desktop shortcut to \windows\system32\devmgmt.msc
to control the devices (needs admin access)
expand [+] network adapters and you'll see the list
mine are

Dell Wireless 1502 ....
Realtek PCIe FE Family Controller
Just right-click->disable and you can always right-click->enable

The png posted shows both are enabled and the wired has the gateway.
If the cable is disconnected, this is quite impossible.

SO, first control which device is to be used and then make the connection.
 

http://www.techspot.com/community/topics/i-cant-connect-to-wifi-but-connect-with-an-ethernet-cable-works-even-when-it-isnt-plugged-in.204891/
Relevancy 15.05%

Hi, I'm having a problem with my Dell Latitude E6400. When I'm not using it for a while the screen goes black (like into a sleeping mode) like all computers and laptops do. But if it stays black for a little while, and when I go to get back on it and move the mouse around or press the keys the screen won't turn back on but the computer is running because the light on the keyboard are lit up and I can hear the fan running. The only way I can get the screen back on is if I shut it down by pressing the power button on my keyboard and turning it back on.

Can anyone please tell me what to do or what is wrong with it. That would be much appreciated. Thank you

Being thirteen doesn't mean I don't know what I'm talking about.​
 

http://www.techspot.com/community/topics/latitude-e6400-screen-goes-black-after-not-using-and-wont-turn-back-on.204671/
Relevancy 16.77%

My year old ACER Aspire keyboard just stop working in a couple of capacities First the numbers on the key wouldn t type at all Checked Num Lock fine then stopped some thing... Laptop working wrong the type and keys tried to type numbers at top of keyboard well some typed the right number but most didn t or typed more than one number Ran Webroot Anti-spyware and Anti-Virus clean Then I shook my computer to see if any crumbs or foreign materials were throwing something off clean Took out battery nada Restored computer to the day before any problems Changed nothing Pressed every Laptop keys stopped working and some type the wrong thing... key to see if something was stuck or key broken None The Delete Backspace Enter and Space Bar do NOT work at all So basically the entire keyboard is not working due Laptop keys stopped working and some type the wrong thing... to something If I type any one key some of them type what I wanted but continue to type the letter or number until I log out of my Google Engine I have always had issues with the keyboard I will be typing along and the cursor will randomly go back to previous sentences and start typing what I am currently typing It is so annoying Why is it hopping all over the place A computer major friend who teaches computer classes said to write to Google and maybe I would find others with similar problems I found several quot sticky keys quot problems but none on point with none of the keys working or working properly He suggested perhaps a Trojan Horse virus but my sweeps come up clean Can anyone help me Thank you Shawnascy nbsp

A:Laptop keys stopped working and some type the wrong thing...

It could be a virus. But It also could just be your keyboard is bad. You may need to take it to your local repair shop if it. Is a laptop and have them check the keyboard out for you. I really do not think it is a virus.
 

http://www.techspot.com/community/topics/laptop-keys-stopped-working-and-some-type-the-wrong-thing.204613/
Relevancy 15.48%

I am running Windows 8.1. After restarts, the laptop screen would be blank, yet the computer would load. If I hooked up a 2nd monitor, it would show the desktop on that screen but laptop screen blank.

Now when I try to type on that computer (I'm currently on a different computer) the typing of the keys is all off (none of the letters actually type what they are supposed to and some open up random windows and command prompts)

I am wondering if this is a virus. Currently running Malwarebytes. I did a system restore earlier and the problem wasn't solved.
 

A:Blank Screen error and typing issues

Could be a virus, but could also mean the motherboard is faulty. If still in warranty, RTM.

Does the laptop have a bootable CD reader? If so, then download and make a bootdisk of a small linux (e.g. puppy linux). Booting off that will virtually prove if the motherboard is faulty or not.
 

http://www.techspot.com/community/topics/blank-screen-error-and-typing-issues.204596/
Relevancy 17.2%

Hello!
About a year ago, the newest monitor for our home's main computer stopped functioning, so it had stopped being used. However, today I was in search of some files I needed that were on our old main computer, so I hooked up the old monitor that came with that computer and it didn't work as well. (The old monitor worked on a different computer). I tried hooking up a few other spare monitors to the old computer, but it they also did not work either. I came to the conclusion that the monitor input had crashed.

So, here's my question: Is it possible to use a KVM switch to display the old computers monitor display on my laptop to get access to my files, even without the old computer's monitor input functioning?
 

http://www.techspot.com/community/topics/kvm-switch-no-working-monitor-input.204590/
Relevancy 15.48%

Hi, hope I've put enough specs in profile for you to help. I have a Compaq Presario 6735s I bought around 2008. CPU quite slow but graphics card not bad so made decision to upgrade. Looked up the laptop manual here to find compatible CPUs for motherboard, socket type etc. Went through 3 different (*****ic) buys before I found one that actually fitted.
Now with everything reassembled, screen will flash up once upon powering on, then nothing. All usual lights come on, even my wireless connects, makes usual start up noises, fan, dvd drive etc ....
Proceeded to take everything apart again, re-connected everything I tampered with. Even RAM, which I didn't have to remove before.
Still same reaction starting up.

Really frustrated with myself as thought this would be the right one. Could honestly cry, haha.

I read the tutorial on here called 'No POST' to no avail either. I really hope it can come back from this.
One last thing I can think of (before pulling new CPU out) is upgrading BIOS to support new CPU but with no screen I am stuck.

Can someone please give me a little direction?
 

A:Upgraded CPU on laptop, now screen won't work

Did you re-install the old CPU to see if the laptop booted normally again? Upgrading CPU's on laptop motherboards can be a very difficult thing to do. What is supposed to be compatible in reality is not
 

http://www.techspot.com/community/topics/upgraded-cpu-on-laptop-now-screen-wont-work.204383/
Relevancy 15.48%

A few days ago I bought some screenwipes to clean my monitor screen & iPhone screen. They worked great on my iPhone & laptop but when I did my W7 tower I felt bumps which are from un expected sneezes & would like to know if there is another way to clean that off or if I'll just have to use more than one wipe.
 

A:Cleaning my monitor screen

You just have to put some muscle into it! I had the same sneeze marks on my screen from over the years and a bit of elbow grease was the key.
 

http://www.techspot.com/community/topics/cleaning-my-monitor-screen.204176/
Relevancy 15.48%

Hi all,

So I managed to drop my laptop Satellite C870 - 15K to the floor. It cracked my screen (see attached) so I'm thinking of replacing the screen myself. However before I purchase the screen I wanted to make sure the laptop is still working.

When I try to connect it to my TV through HDMI to verify if the laptop is still function I get no image. I thought maybe it's in standby mode or something so I removed the battery and tried again without luck. When I start up the laptop it sounds normal but I don't hear any windows sound or anything. Any advice on how to continue?
 

A:Broken Toshiba LCD screen

Pull off the bottom access panel(s) and make sure the memory and hard drive are seated properly by removing them and re-installing them. It is also possible that the broken screen is shorting out the motherboards video. Try connecting the TV after you remove the LCD panel. One more thought... you have pressed the proper F key to activate the external video port?
 

http://www.techspot.com/community/topics/broken-toshiba-lcd-screen.203601/
Relevancy 24.94%

Someone help me please cannot access but can cable LAN wifi internet My It s urgent Windows IP Configuration Host Name kent-PC Primary Dns Suffix Node Type Hybrid IP Routing Enabled No WINS Proxy Enabled No Ethernet adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description My wifi cannot access internet but LAN cable can Atheros AR PCI-E Gigabit Ethernet Controller NDIS Physical Address - -A -AF- - E DHCP Enabled Yes Autoconfiguration Enabled Yes Wireless LAN adapter Wireless Network Connection Connection-specific DNS Suffix Description Atheros AR WB- NG Wireless Network Adapter Physical Address - -CA- - - DHCP Enabled Yes Autoconfiguration Enabled Yes Link-local IPv Address fe a e b ec Preferred IPv Address Preferred Subnet Mask Lease Obtained June Lease Expires June Default Gateway DHCP Server DHCPv IAID DHCPv Client DUID - - - - -D - C- - - -CA- - - DNS Servers NetBIOS over Tcpip Enabled Tunnel adapter isatap CB C E- EC - E - CD- BE B CDC Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter isatap AA FDD -F C - BD - D -CEDB F Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description Microsoft to Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter Teredo Tunneling Pseudo-Interface Media State Media disconnected Connection-specific DNS Suffix Description Teredo Tunneling Pseudo-Interface Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes nbsp

A:My wifi cannot access internet but LAN cable can

Are there any yellow (!) in the device manager?
 

http://www.techspot.com/community/topics/my-wifi-cannot-access-internet-but-lan-cable-can.203495/
Relevancy 15.05%

I turn-on the power on my laptop and all I see is a cycle of Red, Green, Blue, White, & Black of color on my screen. Computer was working the night before. I do not know much about troubleshooting a computer. Can anyone please give me an advice or guide if this is something I would be able to tinker to work or bring the laptop over for service.
I have a Dell XPS1730 (5 years old) with Nvidia IUPGA5D G84. Recently, upgraded to Windows 7
I appreciate your assistance.

Thanks.
Daire
 

A:Laptop screen flashes RGBWB color upon power-up

The internal video has died. To verify this you can attach an external monitor and see if the display is normal
 

http://www.techspot.com/community/topics/laptop-screen-flashes-rgbwb-color-upon-power-up.203382/
Relevancy 15.48%

Can anyone help,
I have a compaq presaio cq61

the other day the screen went dark, could just see the screen in the background, scrolled through forums and decided that it could be the inverter.
Purchased and fitted a new one screen lights up fine but now is continuously pulsating. Does anyone have an idea on this, could it be the wrong inverter? or other problems.

Your help in this would be extremely appreciated.
 

A:Laptop screen pulsing

The LCD panel could be bad...
 

http://www.techspot.com/community/topics/laptop-screen-pulsing.203088/
Relevancy 17.2%

Replaced the mobo (Gigabyte GA-78LMT-USB3), CPU (AMD FX-4300 Vishera), and RAM (G-Skill RipJaws 4MBx2) in an older system running WinXP (planning to upgrade to Win7 ASAP). Everything booted up just fine, but the HP keyboard and the Logitech mouse, both of which which work fine on another computer, aren't being recognized at all by the computer. No error messages, just not working. Not even lighting up. We've tried every USB port on the system, and even used a USB-PS/2 adapter to try it that way, to no avail. I'm out of things to try. My only thoughts:

1. Could USB be disabled in BIOS by default? If so, how do I change that without a keyboard and mouse, when I can't even access the BIOS?

2, Could the USB system on the new motherboard be defective? How do I test that?

3. Is there any possibility at all that it's related to the Antec 500W PSU--perhaps not enough wattage for this system? (Hard drives are all pretty old.)
 

A:USB keyboard and mouse not working after upgrade

Create and boot from a Knoppix Live CD (just google to find and download the ISO). If USB still doesn't work when you boot from knoppix, you know it must be either hardware or BIOS issue.
 

http://www.techspot.com/community/topics/usb-keyboard-and-mouse-not-working-after-upgrade.203285/
Relevancy 15.48%

I have a Dell Latitude D that I dropped while in its carrying bag so even backlight Dell screen Latitude replacement no after it wasn t a real hard landing Now the backlight won t come on I swapped an entire screen assembly from an identical D and it still won t turn the backlight on I swapped the screens again and the borrowed D still works fine and mine won Dell Latitude no backlight even after screen replacement t work I didn t bother to test my screen in the borrowed D I can run an external CRT with mine and I can see the LCD display if I shine a light on it so I know the display is working and not cracked The laptop won t drive the CRT Dell Latitude no backlight even after screen replacement unless it thinks the lid is down so to use the keyboard I removed the sense magnet from the lid and taped it to the place where it would be with the lid closed I ve noticed in the past that this D often stayed fully on including the display it seemed when I closed the lid and walked away for hours Note When I tested the borrowed screen I had the sense magnet removed When the magnet is taped in place simulating lid down both the backlight and the display are off I can t see the display even when a light is shined on it but when the magnet is removed simulating lid up I get the display with no backlight It seems like the display knows whether the lid is up or down but the backlight seems to act like the lid is always down Is this possible What should I look for nbsp

A:Dell Latitude no backlight even after screen replacement

Did you replace the backlight inverter?
 

http://www.techspot.com/community/topics/dell-latitude-no-backlight-even-after-screen-replacement.198916/
Relevancy 27.52%

I recently got a laptop it turns on well it doesnt boot up ive tried installing windows xp and nothing happens also ive tried wiping the hard drive using various disk erasers and nothing happens also tried using different hard drives but the xp disc ive got and the Dban and other disk erasers ive got only work when I take the hard drive out I really need help im baffled by it nothing seems to work when any hard drive is inserted?????? please help me
 

A:Got a Compaq NX9000 and can't seem to do anything with it

Have you looked at the BIOS and checked the boot settings are correct?
 

http://www.techspot.com/community/topics/got-a-compaq-nx9000-and-cant-seem-to-do-anything-with-it.190534/
Relevancy 18.92%

My laptop had headphones plugged in because I was watching a film but while I was in another room my laptop was knocked onto the floor around - ft drop change mic to a HD audio headphones Realtek port? port a manager, landing on the headphones jack the wire is fine but the ports completely broken I can see cracks and its loose and everything The laptop has Realtek HD audio manager and in my experience of this program on other desktops I ve had I was able to change Realtek HD audio manager, change a mic port to a headphones port? what port does what My laptop only has a headphones port and Realtek HD audio manager, change a mic port to a headphones port? a mic port and I would like to see if I can switch the mic port to be the headphones port because I never use an external mic however in Realteks audio manager I can t find out how to do this In pictures I ve seen on the internet there is a quot Device Advanced Settings quot button as seen in this picture http www vistax com attachments ealtek-hd-audio-driver-version-hd manager jpg but my program doesn t have this Do I need to download a newer version of the software or is it just not possible to change my mic port to be my headphone port I dont mind if I have to use third party software I just want it to tide me over till I can get it sent away Thanks for suggestions greatly appretiated nbsp

A:Realtek HD audio manager, change a mic port to a headphones port?

I doubt very much if this will be possible. The mic and headphone ports are wired directly to the Audio section of the motherboard, there connections cannot be altered.

Your best bet is to get the damaged port repaired.
 

http://www.techspot.com/community/topics/realtek-hd-audio-manager-change-a-mic-port-to-a-headphones-port.166497/
Relevancy 24.08%

Whenever I unplug from the router and go upstairs, I can't connect to my wi-fi. The problem also persists downstairs unless I am connected by ethernet. It's been happening for about 2 days. At first the wi-fi would jump in and out randomly and quickly but now it simply wont connect. Is it a virus or how can I fix it?
 

A:Wifi doesn't connect unless directly connected to router by ethernet cable

You might just need to restart your router / WiFI AP to resolve that issue.
 

http://www.techspot.com/community/topics/wifi-doesnt-connect-unless-directly-connected-to-router-by-ethernet-cable.202219/