Windows Support Forum

Panasonic Toughbook CF-C1MDB01 error

Q: Panasonic Toughbook CF-C1MDB01 error

i recently instaled win 7 ultimate 64 x
downloaded drivers from panasonic but i am unable to see wi-fi conections or to instal intel network lan driver
sry for my engl
for the last 12 h i am working on this crap laptop
Relevancy 100%
Preferred Solution: Panasonic Toughbook CF-C1MDB01 error

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link (This link will automatically start a download of Reimage that you can save to your computer.)

Relevancy 85.14%

Relevancy 85.14%

i am trying to install an os on a toughbook with a backpack....the system boots but then goes to a screen indicating to install a boot floppy & press f1, if a do this my drivers are not present for the backpack so i get an "a" prompt, i try to install the drivers but it isnt showing the hd????? i'm lost .......i cant find a "detect a hd mode anywhere ..can anybody help

Relevancy 85.14%

i have a really old panasonic toughbook with windows xp on it heres the problem:
when i go to my computer it says that my total space on my c drive is 18.6 mb but when i go to my computer it says that microsoft office takes up like 74 mb hows that possible?
also when i try to remove the program i get this error message C\WINDOWS\SYSTEM32\AUTOEXEC.NT The systenm file is not suitable for running MS-DOS and Microsoft Windows applications. close or ignore but when i press ignore it closes it anyways can anyone help?

Relevancy 84.28%

I just bought a working Panasonic CF25 ToughBook at a yardsale for $20!!! The battery is no good but it works fine with the AC adaptor, it has win98 installed, the bad thing is it only has a 800mb harddrive in it and I want to use it to store and review Digital pictures when I go on trips, what kind of harddrive will fit this laptop and is there a size limit? I would gladly spend $100 on a new drive if I knew what would fit, and does anyone know where I might find a good battery for it cheap, a new one is over $125 on E-bay and I don't feel good about buying a use one there? And do laptops need a special version of windows or will any off the shelf version work? Thanks

Relevancy 84.28%

I'm working on a Panasonic toughbook CF-27 with xp sp3, 256 ram, no wireless card or usb. I had this laptop for over 10 years and had it in storage for the past 8 due to computer problems but want to put it back in use again. My question is am I able to upgrade the memory anymore? find a wireless card(if I'm able to what information do i need to find one)? and how do I go about getting usb ports for it if I'm able too?

Relevancy 84.28%

Hey Techcats

I have been searching for a resolution for a while and figured i would shoot to the forums. I have a newly formatted CfC1 mkII toughbook with windows 7 64bit operating system and I am unable to connect to the internet... this is vital because I am trying to update my drivers. I have gone through and downloaded the lan, modem and wireless options to no avail. So if anyone can find a thread or has an answer please get at me.


A:Panasonic CF-C1 toughbook Internet

and welcome to the Forum

Please post a screenshot of Device Manager with the Network Adaptor group expanded. . see the link in my signature for how.

How do I get into Windows Device Manager?
Relevancy 84.28%

Hey missi again, I got so lucky with my dell that I thought I would take a shot at this Panasonic Touchbook. Older laptop, cant find any info on it. Dont have a clue about bios or anything. A friend brought it to me and said see what you can do with it. First time I have ever seen a cd eject out of the keyboard. I do have a model no.CF-61KXF4BAM. Its locked out with a cmos password or something. Any help would be greatful. Im sure its a long shot. Thanks a million missi

A:I have a Panasonic toughbook cf-61 locked out

This is fixable. You may need to open up the Laptop
and reset a jumper temporarily.

Sometimes manufacturers post bios default password on there site.

BTW Welcome to Techspot

I hope you have a very pleasurable stay at Techspot.

Regards Jase
Relevancy 84.28%

So i have an old panasonic toughbook with windows xp on it and when i check the c drive it says that the total space on my c drive is only 18.6 mb but i just had microft word on it and thats like 78 mb isnt that like an anomalie or something?please help ive been posting all day

Relevancy 84.28%

Hey I have a Panasonic Toughbook CF- My friend CF-19 Panasonic Reformatting Toughbook thought he would do me a favor and put Windows Ultimate on it I constantly get error messages and at the bottom of my desktop screen quot Windows Build This copy of Windows is not genuine quot I have a feeling this version of Windows is too much Reformatting Panasonic CF-19 Toughbook for my CF to handle anyways Problem being I m not too sure on how he did it or how to reformat it myself So How would I go about wiping this computer and then find a way to use the sticker on the bottom of the tablet which says quot Reformatting Panasonic CF-19 Toughbook Microsoft Windows XP Tablet PC Edition Panasonic quot Product Key xxxxxx Maybe an easy way out is to buy a product key and downgrade Hmm Any help would be great I have a research paper due and instead of buying a new laptop- I decided to fix this one Hah hope that wasn t a bad idea Speak kindly in your tech lingo please I will do my utter best to keep up nbsp

A:Reformatting Panasonic CF-19 Toughbook

Use the techguy utility to give us the specifications. From what I've been able to garner from Google and using the search Toughbook CF-19 , it should be able to support Windows 7 and should have had it as default, not the tablet version.
We need more details that the utility will reveal.
Relevancy 83.42%

I recently bought a used Panasonic Toughbook CF-73. I formatted and re-installed Windows XP. I am unable to find a few drivers, mainly the audio driver. I have tried updating through Microsoft/Windows Update to no avail. I have Everest installed and I am attaching the report. Any help in resolving this issue would be greatly appreciated.
Thanks in Advance!

A:Missing Panasonic Toughbook Hardware

On our toughbooks, we find everything we need on the Panasonic support site. Try starting with
then keep searching on Panasonic support for the drivers you need. There is nothing that is missing from that site, unless something happened in the past three days.
Relevancy 83.42%

I recently purchased a Panasonic Toughbook CF-28 on Ebay and wanted to know where I can get a caddy with the wire, without selling a leg and an arm? Thanks

A:Solved: Panasonic Toughbook CF-28 Caddy

You mean like this
Relevancy 83.42%

My brother has a Panasonic Toughbook CF-27 laptop. He put a BIOS password on it a long time ago. He now needs to get in the BIOS, but forgot the password. He's tried everything he could think of and nothing works. I know on PC's you can change some jumpter settings or take out the lithium ion battery to remove the password. Is there an easy way to get rid of the password on this laptop? I searched the Panasonic site, but didn't find anything helpfull. Will removing the motherboard battery on the laptop do the same? If so, doe anyone know where it's located? Is it easy to get to or deep down in the system?

Any help is appreciated.



A:Panasonic CF-27 Toughbook BIOS password...

It does just that it takes a bit longer.... I mean need to take the battery out for about 3 -4 days to drain it completly. Otherwise ( since i'm not quite famialiar with that particual model ) look inside the laptop for a "CLS CMOS" or something close to that , which will clear the BIOS and subsequently the password.
By the way what BIOS does the laptop has? Award , AMI , Phoenix....
Relevancy 83.42%

panasonic toughbook cf-18 laptop , windows xp pro, version 2002 sp 2

i restored the machine to factory condition after having some windows issues using the 3 product recovery panasonic discs that came with the machine.
i cannot get the wireless to work or turn on . when i open the intel proset wireless program it states that wireless is turned off , when i select wireless on, i get an indication of....the intel PRO wireless network connection is still disabled.use your hardware switch to disable it.
i thought this machine did not have a hardware switch to turn on or off the wireless, if it does please tell me where it is physically located
if not can you talk me through turning wireless on using some sort of software.
i know the machine has wireless capability , as i have used i t before, thanks paul

Relevancy 83.42%


have a Panasonic Toughbook CF-51RCLDFBM.
I bought new hard drive 160 GB PATA 2,5 inch and start to install WIN XP.
When I choose which hard drive want to install system on , getting message that hard drive cofiguration is wrong and ......
There is no setting in BIOS for hard drive. Hard drive is visible in BIOS.

60GB hard drive working ok.

Dont know whats wrong. IS this computer need BIOS updates or I don`t know.

Can anyone help ?


A:New Hard Drive in Panasonic toughbook CF-51

Go into BIOS and make sure BIOS has configured the drive set it to Automatic and that it shows the headers sectors and LBA.
Relevancy 83.42%

If someone is still having issues with wireless not turning on as mentioned here :

Do the following:

Go into BIOS > Advanced > and set the "Wireless Switch" option to DISABLED.

Also, if you need, you can uninstall the Panasonic Wireless Switch software after you have disabled the BIOS option as mentioned above.

This will fix the wireless not working or unable to turn on the wireless issues.
Relevancy 82.56%

My laptop computer cannot log on to the wireless connection at work it says Speed: 54Mbps....Connected....Excellent. But no internet.

I went to Device Manager> Network Adapters

Cisco systems VPN Adapter has a red X


Realtek RTL8139/810x Family Fast Ethernet NIC has a red X

Please help!!!

A:Panasonic Toughbook detects wireless but cannot get on the internet

one more thing:

Intel (R) PRO/Wireless 2915ABG Network Connection has no red X
Relevancy 82.56%

When replacing a hard drive in a laptop, specifically the Panasonic Toughbook CF-61, do I have to use the same exact one that was in it? (Toshiba HDD2612/MK2720FC)

My laptop got chucked across the living room and the hard drive is now inoperable.

Thanks in advance!

A:Relacing hard drive in Panasonic Toughbook CF-61


Well I guess it wasn't tough enough!

Unless there is something proprietary on the Drive I do not see why you would. To be safe check either with Toshiba, or the HD vendor of choice to see if the new drive you select is compatible.
Relevancy 82.56%


I just installed Windows 7 Home Premium 32bit on a Panasonic Toughbook model CF-W8 and not able to determine what two different devices are listed as "Unknown Device" in device manager

Any help or guidance would be greatly appreciated

Thank you!

A:Panasonic Toughbook CF-W8 Unknown Device Drivers

We have many excellent tutorials here at the forums, written by some very knowledgeable people. Here's one that may help, just click on the link. Hope this helps

Device Manager - Finding Unknown Devices
Relevancy 82.56%

I need 3 Toughbook hard drive caddies for a CF-29. I really did not want to pay an arm and a leg for it. The prices on ebay, I think is a bit high.

Relevancy 79.98%


I have a Panasonic Toughbook running Windows 2000.
I used to be able to run wireless PCMCIA adapters and it worked.

Now when I insert both a Netgear and D-link PCMCIA card the entire system freezes.(after installing the drivers) I pull the card out and the system resumes.Also, the lights on the PCMCIA flash and do what they are suppposed to do.

I can use my D-link wired PCMCIA adapter.

So - it is not the PCMCIA slot - it is not the cards - they both work on other computers. It must be 2000.

Anyone have nay thoughts on what i can try next?



A:Panasonic toughbook - running WIN 2000 - wireless PCMCIA freezing system

Hello Colleen,
you may need to do a fresh install of Win2K... Have you downloaded and installed all the Windows 2000 service packs?
Relevancy 52.46%

I have a Panasonic KX-P4410 Laser printer that is displaying the error code E35 and will no longer function.

Does anyone know what the error code means and can anyone tell me how to clear the error??

All Suggestions are greatly appreciated.


A:Error Code for Panasonic Printer

Logic problem, call customer support. Pages/kxp4420e.htm

P.S. This came off the 4420, but my guess would be it's pretty similar.
Relevancy 50.74%

I bought a Panasonic Viera tx-42AS520E SMART TV and I did all the steps of the guide to give acces of the shared folder, but it says, that it is unable to register. They both are on the same wireless network. Can I somehow do a thing like clicking on the video file on my PC and give the instruction to play it on the TV, like using a smartphone?
Relevancy 49.45%

does anyone know anything about the panasonic dmc-f1 (also called dmc-fx1)? does anyone own one (or know anyone who does)?

Relevancy 46.44%

Good day, We have a CF28 PTJAZDM-B It was working fine when we bought it and has been in storage for several months. Now when I turn the power on the power light comes on; the MP light comes on (there are two on this unit one in a left pointing arrow and one in square) and the keyboard lights up.... and sometimes there is a crackling sound. The unit then issues a series of beeps. 1 beep; 3 beeps; 3 beeps; 1 beep I checked the service manual and this series of beeps doesn't appear. The screen remains dead and nothing else happens. Please can anyone help? Thanks Graham

Relevancy 46.44%

ok i just got a panosonic tough book cf-18b thats the one with the tablet mode touch sreen stuff well hear is my question i instaled win xp profesinol on it not the tablet version im haveing torouble geting some of the drivers and also ami gona be able to make the touch screen work without having tablet edition i think from what i read i can but any help or opinons would be great.

thanks in advance
Relevancy 46.44%

Got a sweet little needs OS Toughbook Panasonic toughbook for hubby but Toughbook needs OS no OS installed It is old and used Specs as best as I can tell Model CF M VHFZDM Serial JKYA CPU Type Mobile Intel r Pentium r III CUP - M MHz CPU Speed MHz BIOS V L Embedded Controller V L System Memory MB Primary Master GB Touch pad enabled Display Simultaneous Environment Normal Temperature Serial port A serial port B Touch screen parallel port Modem Legacy USB support All of these are enabled Mode ECP Password is enabled but not set Boot CD Drive there is not one HDD Floppy drive there is not one LAN When powered on screen displays Intel UNDI PXE- build Copyright - For Realtek RTL X X PCI Fast Ethernet Controller v PXE-E Media test failure check cable PXE-MOF Exiting PXE ROM Operating system not found My first step was to take it to my local guy amp have him fix this for me He basically said it would take too much money which I interpret as too much of his time Second step was to connect CD drive and attempt to install OS XP Same message I don t think it recognized the CD drive Third step was to have toughbook boot from LAN with cable connected to my notebook I never said I was smart but but at least my notebook didn t crash I got this message CLINT MAC ADDR D C GUID - - - - D C PXE-E No DHCP or proxyDHCP offers were received PXE-MOF Exiting PXE ROM Operating System not found Fourth step research which was also my between amp step I found a link that described how to install OS w o cd floppy but it was a bit overwhelming I probably could manage this but am too timid to go it alone http www syschat com install-windows-xp-without-floppy-cd- html Is there a kind soul out there who will talk walk me through getting this toughbook to work I am capable of opening it up and doing quot stuff quot I would just like to have someone who knows a bit more ok ok a whole lot more about computers than me to help Thanks for any feedback I know it s Christmas season amp I myself have to work but if you get bored with all the new toys well thanks anyway nbsp

Relevancy 45.58%

I purchased a Toughbook CF-18KDHKBVM w/ a 60GB HDD. I'd like to upgrade this drive to a 100-120GB drive. I'm not sure which dive is compatible w/ my laptop / tablet. I know most of the OEM drives are Toshiba, Hitachi & Fujitsu. Does anyone have a specific model number of a compatible drive??



Relevancy 45.58%

I have a panasonic toughbook CF-R3 and the problem I have is that sometimes it turns on and the times time not. The LED is on and when I push the power button it turns off and if I leave it in the bag a couple of days then it works fine but as soon as I turn off again it will need some days to be able to start again. Very bizzare! Does anyone have any idea.

A:Toughbook won't turn on sometimes

When you shut it off, do you close the lid?

If you do, next time don't and see =over a period of several days if it starts ok.

If it does, then a sticky micro-switch on the close-lid circuit is likely.
Relevancy 45.58%

Does anyone have experience on upgrading a panasonic Cf-25 toughbbok.
Relevancy 45.58%

Hi All,
I have a Panasonic CF-29 and I'm trying to open it up to install a different WLAN card. I couldn't find any instructions on how to open it up and install a mPCI. I know I will void the warrantee but still need to test this.
please help !!!!

Thank you in advance.

A:Toughbook & mPCI

There is no mention in the specs that it actually has a mini PCI expansion slot.

I would suspect that the WLAN cound be integrated on-board in the Centrino chipset.

Or do you have some reason to think that's not the case?
Relevancy 45.58%

Hello everyone I have Panasonic cf- CCBAXBM I have no sound since I have upgraded my OS to Windows so I try Windows dance edition I can t hear anything from my laptop speaker nor I put on earphones Help! cf-74 Sound! Toughbook No speaker I tried uninstalling High Definition Audio Device trying to replace it by Realtel Sigmatel and other drivers I can t remember but it always say quot it don t match my device quot And the Windows kept on re-installing the HDA whenever I tried to reboot So I started looking for other drivers in Device Manager to see what might Toughbook cf-74 No Sound! Help! have the problem Under System device gt system speaker gt properties it says Device Type System Device Manufacturer Standard System Devices Location on Intel R GBM ICH -M LPC Interface Controller - B Device Status No driver installed in this device That is what it also says on Programmable Interrupt Controller System Timer Intel R G ICHM Family SMBus Controller DA I havn t check the other drivers but I think those are the problem I tried to find them but I still have no luck Please anyone help me nbsp
Relevancy 45.58%

I have a Panasonic CF-19CDBAXVM Toughbook, I created a bootable ghost boot disk with an image on it and booted from the USB CD/DVD drive into ghost no problem but when I went to select the image it no longer sees the CD drive???? I can boot from ghost boot disk, I have also tried XP and it will boot from that as well but as soon as I go to find the CD drive it is not there?

It's a Intel Core Duo 1.6, 1.5GB RAM and 80GB SATA HD.

A:CF-19 Toughbook won't see CD/DVD drive

Try going into the controll panel, select systems, then hardware and Device manager. Is the drive listed there or have a yellow exclamation on it? If it does, right click on it select remove. then reboot your system and let windows reinstall it automatically. This should work. let us know if you have/or don't have success.
Relevancy 45.58%

hi i had a hard drive out of my fugitsu with 7100 installed i have put it in my old toughbook and everything works fine altough a bit slow apart from the sound if i right click on the speaker icon it says 'no audio devices installed' could anyone point me in the right direction is this a driver problem?

A:toughbook sound

Have you checked in device mngr to see if their is a little yellow triangle in your sound? If so try update driver.How to find device mngr. I use my computer start menu, right click then click manage. Then you'll see device mngr. clcik on it and check your sound devices . If you know how to use the snipping tool do a snip then use the paperclip icon on the post to attach a snip of your device mngr.
Relevancy 45.15%

I recently purchased a Del Latitude 7202 Toughbook.
At same time purchased 12V power adapter.
The adapter was shipped separately.  SKU 469-4546.  The power plug did not fit computer.
It is too fat.  Spent 4 hours with tech support and they told me the wrong part was shipped.
They said they would send a replacement.  10 days later I get a package with an HDMI cable in it.
Call support back, was told they would just issue me a credit and I can purchase one online.
I was told I needed part.  450-AAYR.  Web page for that part lists the 7202 as compatible.
It arrived yesterday.  Still doesn't fit.  I am returning it as well.  
What is required to get the correct part?
Relevancy 45.15%

I have 2 CF-19 one Mk1 and the second Mk2.
The problem is that both don't recognized the PCI Express card, however, it is recognized in my Fujitsu laptop with Win XP no problems.

Can anyone please shine some light on this problem? I have installed all drivers from Panasonic site to no avail.


A:PCI Express card on Toughbook cf-19

Hmm, that is indeed strange as, "Panasonic incorporates ExpressCard/54 slots in all the fully rugged and semi-rugged models of their Toughbook brand of laptop computers."

Is there some setting in BIOS that isn't set right?
Relevancy 45.15%

Hello aquired a Panasonic toughbook of whichs screen is only white when I start it up. I have connected it to an external monitor and everything works hunk dory. I don't think the screen is dead because usually don't they go black when dead? plus it responds to signals like when the windows xp boot disc changes the screen dramtically on the normal monitor it'll flash black then back to solid unchainging white? what is the deal

Relevancy 45.15%

Hey so my toughbook CF-72 has an ethernet port which is covered by a metal sheath which I removed and promptly put a cable into but evidently it doesn't work. Well not only does it not work device manager doesn't even recognize it as being there. it does say however there is an "unknown device" so I tryed to install the ethernet controller driver but it did nothing so I rolled it back to "unknown device".

Whats the Deal here? thanks in advance

Relevancy 45.15%

Recently updated a Panasonic Tough Book CF-28 from Windows 2000 to XP. The touch screen drivers worked in 2000 but I can't get the touch screen to work in Windows XP. I've tried numerous drivers such as Evio and Fujitsu to no avail. The screen is a Fujitsu but none of the available drivers work. Anyone have any ideas how to get the touch screen back? Thanks in advance!!

A:ToughBook CF-28 Touch Screen

install winxp tablet edition
Relevancy 39.99%

I wanted to ask a question of how to look for an upgrade fro ram on a panasonic tough book Cf-25. I would like to upgrade to windows XP but from what I understand the minimum requirements are at least 128megs of ram. I have spent a couple of hours on search engines trying to find a proper upgrade. They talk about a 64x1 is that the best I can do? I am not the literate on this topic I work as a sous chef in a hotel so I hope I'm not stating the obvious. I am strarting aside business with a friend and wanted to use the computer for on the road sales eventually adding a mobile printer. Thanks for any help

A:Panasonic CF-25

If I recall, the CF 25 uses a 133 MHz pentium 1.

If that is correct, then thats a long way below the minimum CPU specs required (to be useable at all it needs to be 450 MHz, even though Microsoft claim it will run on a 300 MHz chip) for XP.

Thats not going to be upgradeable, so don't get too hopeful about running XP.
Relevancy 39.56%

Hi, everyone - nice to be back..............
I have one or two problems with my Panasonic camcorder on my new HP laptop operating on Windows 7.

I was able to use either the installed movie maker on my old XP computer or the Panasonic software supplied on disc with the camcorder.

I'm not very happy with the Windows 7 movie maker replacement, nor the Roxio software which is installed and which keeps cutting itself off for no apparent reason about 5 minutes into the download.

But most important is the reaction to my attempts to re-install my Panasonic software disc. I keep getting an error message, which I neither understand nor do I have any idea what to do with it. I can't get the attached screenshot to open but the error message reads:-
! Error executing file.
The requested operation requires elevation

Can anyone out there help with any of these issues?

Relevancy 39.56%

Does anyone use the Panasonic Broadband Router? I have tried everything I know to do to get it to work with WinMx. I use XP but the firewall is turned off. I have mapped the ports and entered that info in the setup of WinMx. No luck. Can anyone help?


A:Panasonic Router

Hiya and welcome

What is the full version of the router? There are a few FAQ's jotted about the Web, so may take some searching.


Relevancy 39.56%

I just bought a Panasonic PV-L453 VHS C camcorder with a built in still camera. I got a new Panasonic 64MB SD card for it, and whenever i put it on photo mode with the card in it, it says it is write protected whether the switch on the card is in the lock position or not. It did the same thing with another 128MB card made by simpletech. I'd appreciate any ideas on how to fix this. Thanks.

A:Panasonic VHS C still camera

are you sure that the camcorder will accept cards that large? are you able to go into card setup and format the card?
Relevancy 39.56%

hi all.

im looking for panasonic kx-p1121 win 7 driver.

its connected to my pc using LPT printer port.

please help

A:Panasonic Dot Matrix

Here are the drivers...
Go Printers-Add new printer-Have disk-Go to extracted folder-Select the inf file-Choose your model and install

Happy printing
Relevancy 39.56%

I have a new Laptop with Win 7 Ultimate. I cannot find any Driver for my Multi-Function Station Panasonic KX FLB751 for Win7 at the Internet. Does anybody knows a solution for that.

A:Win 7 Driver for Panasonic

Try here :
Remember - Google is usually your friend !
Chris Cosgrove
Relevancy 39.56%

I have a Panasonic Palm Cam model PV-SD4090. The last time I turned it on, it sounded like it couldnt read the disk. It just sounds like it was "cycling" trying to read the disk, even when it was turned OFF. I finally got the diskette out. It is a disk mentioned in the SUBECT line. Obviously the camera needs repair, but that does not make monetary sense, since newer cameras are much smaller and cheaper. I got a new one for Christmas (Kodak Easy Share C433). Any help would be appreciated.

A:Panasonic Superdisk 120 MB

speedbump1100 said:

I have a Panasonic Palm Cam model PV-SD4090. The last time I turned it on, it sounded like it couldnt read the disk. It just sounds like it was "cycling" trying to read the disk, even when it was turned OFF. I finally got the diskette out. It is a disk mentioned in the SUBECT line. Obviously the camera needs repair, but that does not make monetary sense, since newer cameras are much smaller and cheaper. I got a new one for Christmas (Kodak Easy Share C433). Any help would be appreciated.Click to expand...
Relevancy 39.56%

Does anyone know if this camcorder is good for everyday basic video taking? If not can you please tell me your opinion if it is under $300.00.

Thank you for your time!
Relevancy 39.56%

Hello i would like to know if there is anyone that could tell me how to fix the following problem.

My LCD screen on my P3 CF-72 has a line across the screen, at first i though it was dead pixels but then it moved.

Bad connection maybe? Thanks for any help- if you need anymore detail i will post later, i am in a rush now.

A:Panasonic CF-72 LCD Problem

It could be interference, but its more likely that you are trying to use a screen resolution or refresh rate that isn't fully supported by your flat panel.
You will need to read its manual and adjust your resolution according to what it says.
Relevancy 39.56%


I am installed panasonic multifunctional in windows 7. Model KX-FLB800/KX-FLM650.

Driver does not support.

In driver CD support upto Windows XP. How to installed panasonic multifunctional in Windows 7.


A:Panasonic Driver


Install in xp compatiblity mode

Save driver to desktop.
Right click the driver and select propertie/compatiblity. Make the proper selections
Click OK
Right click and run as administrator
Relevancy 39.56%

Hi, I have the above mention camera. I want to take pictures of my kids at night at a fountain with lights under the shooting water. ( i will attach a picture) BUT I don't know the correct setting. We went the other night and my pictures are terrible. Any help would be great!

A:Panasonic DMC-FZ30

The fountain was moving, the kids were moving and the camera was moving-all in a night shot that requires the lense to remain open for considerable time, and also the backlighting places everyone in shadow. Worst of all conditions. I can think of no way to get that shot unless the fountain is taken seperatly and the kids are superimposed from a seperate shot taken in daytime.
Relevancy 39.56%


I have a panasonic NV-GS230 video camera. When i connect it to W7/32 bit i only have the webcam. I'm unable to upload my video's from the camera to W7.

When i tried installing the usb drivers i've got the message that they aren't supported in W7. I contacted panasonic about this and they told me i have an unsupported camera (which is only 2 years old).

I now tried installing the USB drivers in the Win XP Mode. But now I get an error that my computer doens't have any supported USB 2.0 ports.

Anyone any idea how to fix this.

A:Panasonic NV-GS230

hi baldeagle , download the vista drivers for your camera and run them in compat mode ,run them as administrator , the vista drivers are more compatible than the XP ones
Relevancy 39.56%

I ve just been given a Lumix G Naturally the accompanying manual hardly helps with any of the functions so I uploaded the pdf manual - G3 lumix panasonic all pages of it I ve printed out panasonic lumix G3 some of the pages which seem to be the most relevant but since there s no search facility I may have missed some crucial explanation My real problem is I only know how to take a basic picture on the camera and even when trying to follow the instructions I find they aren t detailed enough I don t know how to zoom in other than twisting the lens which has a very limited action and I don t know how to turn on flash Plus lots of other things The other problem is that my eyesight isn t good so trying to see what the icons are in the so called manual is next to impossible Does anyone know if there s an easier more explanatory manual available I ve Googled it but come up with nothing nbsp

Relevancy 39.56%

We are trying to stream do 170 Panasonic How a use HPX as I webcam? my live video to a member subscription site It s a short show stream The trick is that we want to be able to do this using an HD video camera that gives us greater How do I use my Panasonic HPX 170 as a webcam? flexibility to record the show in HD as it streams as well as offers the advantages of a professional camera things How do I use my Panasonic HPX 170 as a webcam? like remote control operation high quality auto focus manual white balance external shotgun mic etc We have done this in the past using a pinnacle analog capture card in a Windows XP system However the system was old and unstable and we need to move our operation to our new Windows bit system We ve been unable to find a solution for this We tried putting the card in the new computer but the cam How do I use my Panasonic HPX 170 as a webcam? platform which recognized the video signal when the Pinnacle card was in the XP system will not recognize the signal in the Windows system Does anyone have any experience with this sort of thing nbsp

A:How do I use my Panasonic HPX 170 as a webcam?

have you got the updated w7 driver for that cam?
Relevancy 39.56%

Hey all,

Does anybody out here have an industrial grade Panasonic Toughbook? If so, how do you get a commercial toughbook for non-commercial purposes?

A:Panasonic toughbooks?

Panasonic won't let you buy one?
Relevancy 39.56%

Gentlemen I have apparently discovered the sole incarnation of a mobius strip in software from I have a Panasonic Toughbook CF- that needs a OS change My local IM geeks wiped everything from it because it was quot no longer network compatible quot Here s my problem It OS? install Panasonic new to could be a nice toss-around PC for field work if it had an OS however it no longer does Here s the never ending problem It has a removeable FDD bay and CD drive and Floppy Both will not fit at once and ME and XP will not allow me to make the C drive a bootable drive Therefore I cannot boot with a boot disk and run setup from the CD Confused So am I Anyone have any idea how to put a modern OS on a laptop with one drive capability By the way I actually thought that ME was bootable but it doesn t act like it Is it supposed to be Thanks I need to go iron my pocket Panasonic to install new OS? protecter now nbsp

A:Panasonic to install new OS?

start with the floppy drive and use the fdisk utility.. then reboot and format c: after format is complete copy the bootdisk to the hard drive. this should enable you to then attach the cd and install os.
Relevancy 39.56%

Hi all. I just aquired a Panasonic Toughbook model cf-37. It is older but the price was right (free) so I jumped on it. It has a DVD drive on it and I am unsure how to use it. the DVD is model # cf-vdd372.

The manual was talking about requiring some kind of card to play dvds? I am totally stupid when it comes to things like this, so if anyone would, please walk me through getting this thing hooked up.


Rob Oneal

A:Panasonic Laptop DVD

Can you clarify exactly what type of card your manual speaks of - this is not normally the case.
Have you tried watching a DVD on it yet? I'm assuming that the previous owner plugged the drive in and used it at some point? Generally, if a computer comes with a DVD Rom drive then it generally has some software enabling the viewing of DVD's.
The drive should work anyway with DVD's that have content other than DVD video, (data, pics, music etc. - DVD's aren't only about films) But to watch DVD films then you would normally require some software to view them with or a standalone codec (another type of software) to enable already installed media players (windows media player for example) to play the films.
Try a DVD Film - what happens if anything?
Relevancy 39.56%

My boss uses a Panasonic Quiet KX-P2124 DM printer (ancient!!) and the Out of Paper light is blinking, but it has paper. I don't know much about dot matrix printers. Can anyone help?

Relevancy 39.56%

My camcorder appears to record etc., as you can see the stuff you are recording on the screen but when you go to play it back it will not read the dvd. A friend says the pick up lens is not moving freely. The eye? I have no idea what he means. All I know as that it does not recognize the dvd even to finalize it. Anybody have any suggestions? Please?
Relevancy 39.56%

I have a 52" DLP tv as a second monitor attached through pc-vga port. It looks great, it's just that is has flickering, does anyone know if there is a way to get rid of the flickering or atleast reduce it. My graphics card is a Nvidia GeForce 7300 GT. i have it installed on Vista Home.

A:Panasonic Tv as second monitor

Check the refresh rate you're using, perhaps changing it might help.

I connected my 50" plasma to my new laptop using the HDMI connection, and it was rock-steady. I also tried the VGA connector, and that appeared to be fine too.
Relevancy 39.56%

Hi i am about to buy a Panasonic DMC FX 77 compact which has a touch screen .. ive never had a touch screen before and would appreciate any comments regarding the benifits or even draw backs of a touch screen and wether im doing the right thing .. its a big touch screen on the FX 77 and vitually fills the entire camera back .. thanks for your help and comments .. Michael

A:FX 77 touchscreen < Panasonic >

I didnt even know touch screen cameras were avalible. I would suggest you go try it out in a store setting. If it is really compact I can see big fingers being an issues- as they can be with smartphone keyboards. Otherwise at this point I wouldn't sink much money into a digital camera seeing they are dirt cheap these days. the next technology is the consumer friend dSLRs which are more compact than a traditional SLR. but they have interchangeable lenses. I'd be looking for them to drop in the next couple years.
Relevancy 39.56%

My wife has an old Panasonic VS6 mobile phone. The Panasonic Handset Manager Software used to work with XP but doesn't load with Windows 8. Is there any free compatible handset software that might work?
Relevancy 39.13%

On start-up, my Panasonic CF-27 Toughbook displays a red backround message that reads:

Save to Disk file not found
Save To Disk feature is disabled

I have looked in the BIOS through the F2 key for Setup, but I cannot find a suitable change to overcome this message.

Can anyone tell me how to correct this?


Relevancy 39.13%

SD cards and Panasonic Plasma

Just bought a panasonic plasma (TH-42PZ80U) with an SD card slot and am having a problem with the SD card.

1) The Plasma allows you to view photos on screen, off the SD card. I use a Sony Cybershot as a camera (with a memory stick PRO duo card), so after downloading to my computer, I then download images onto a SD card. The Plasma wont display them?? It says file not available. I am saving the pictures as a jpeg file without modifing them on the computer. I know the pictures are on the SD card because I can open them from the card on the computer. The SD card is a standard 2MB san disk card.
Any help would be appreciated

A:Panasonic television and SD card

Read the manual. Which picture format(s) does it support?
Relevancy 39.13%

Unable to download pictures from my new panasonic lumix camera. Using a card reader.

A:Download Panasonic Lumix

do you know if the card reader works - it should just find the images on the card - they maybe in a subdirectory - what happens if you use windows explorer and browse to the cardreader ?
Relevancy 39.13%

I can capture vhs tapes and make a mpg file on my hard disk. Once it is a mpg file, I can import in into Pinnacle Studio 10.8. I have on my motherboard firewire input/output capability but even though it sees my Panasonic dvr, I get the yellow "i" and it it is looking for a driver which Panasonic doesn't supply. I prefer using my external dvr recorder not my internal dvd writer because on this Panasonic DMR-ES25, I have the ability of getting almost dcvd quality in 4 hr. mode and I would like to combine many vhs tapes to make 8 gb files before burning.

Any suggestions will be appreciated.
Relevancy 39.13%

When I try to import video files from my Panasonic SDR-H200 video camera to my PC using ImageMixer 3, I get an error message which reads, "IMxBrowser.exe has encountered a problem and needs to close blah, blah, blah" The error signature shows, App Name: imbrowser.exe, App Ver:, Mod Name: imbrowser.exe, Mod Ver:, Offset: 0002f885.
If I try and use other software it indicates that my video camera is not detected, any ideas?

A:ImageMixer 3 for Panasonic problem

It would appear that my recently installed Kaspersky I.S.7 was causing the importing problems. I temporarily suspended Kaspersky and everything worked beautifully.
Relevancy 39.13%

Wondered if anyone might be able to help with a problem I'm having with my Panasonic PV-DV203 palmcorder. Whenever I try to record or even play back a tape, I get a message -- "Tape Not Inserted" -- when there IS a tape inserted. The palmcorder will not play or record. I've tried different new tapes and switched batteries, but still get the same result. My tapes are Panasonic and I've only recorded four or five tapes since I bought the camcorder. I haven't used the camcorder very much, and it's never been dropped, abused or overused. Any ideas from anyone? Thanks.
Relevancy 39.13%

Hi i have a panasonic NV-GS27EB camcorder W/tape I dnt have a firewire port on my pc but i bought a 4 pin firewire to usb cable to connect the camera to my pc but it doesnt recoqnize the device i recon i need the drivers but i wasnt supplyed a drivers disk, Im running win7 any help would be appreciated its startin to annoy me cnt find drivers anywere.

regards LAMY

A:panasonic camcorder issues

the firewire to usb do not always work

whats the make and model of the PC - do you have an express slot or pcmcia slot
Relevancy 39.13%

When I download movies taken on my Panasonic DMC-TZ4, the file extension is .MOV. According to the camera manual and your FAQs QuickTime should be able to play this type of file. But, when I try I just get weird colored patterns (the audio works). I updated my QuickTime to the latest version. Any advice?

Relevancy 39.13%

here is the issue sense i upgraded to windows 7 i can no longer burn dvd's. i looked in the device manager and it has now been labeled as a cd drive and not dvd . This has also effected nero as well. I have been searching forums for days with no answers to this at all. it seems rather hopeless at this point i guess. To think this all started with the quest to create a win 7 rescue disk so i could fix my desktop. . . .

A:panasonic uj-822b and windows 7

Hi Werterion,

Have you tried updating the device's drivers yet? Here's a tutorial: Installing and updating drivers in 7


Windows Outreach Team
Relevancy 39.13%

I have an Mgd laptop with a VGA plug, to a Panasonic plasma tv with an HDMI plugged in, windows xp will not recognize the tv. Is there a way to get my desktop dislayed on the tv?

A:how to connect laptop to Panasonic

i am not sure i undrestand what cable you are using to connect the laptop to the TV?

your laptop has VGA, you should be able to use that. it might also have an s-video out which you can also use.
the TV has HDMI, which you probably will not be able to use. check if it has VGA and use that, if it does not, it probably has a DVI port, which should work fine. you can get a VGA-DVI cable or a VGA cable with a DVI adapter.
you can google these ports to see what they look like.

hope this helps
Relevancy 39.13%

I have a camera that has been having SD card problems. Sometimes when I put a card in, it says "insert SD card again". I reinsert it until it says "try another card. If I push it back and forth in the slot, it will sometimes work.

Relevancy 39.13%

When I try to import video files from my Panasonic SDR-H200 video camera to my PC using ImageMixer 3, I get an error message which reads, "IMxBrowser.exe has encountered a problem and needs to close blah, blah, blah" The error signature shows, App Name: imbrowser.exe, App Ver:, Mod Name: imbrowser.exe, Mod Ver:, Offset: 0002f885.
If I try to use different software to do the same job it indicates that my video camera is not detected, any ideas?

A:ImageMixer 3 for Panasonic problem

It would appear that my recently installed Kaspersky I.S.7 was causing the importing problems. I temporarily suspended Kaspersky and everything worked beautifully.
Relevancy 39.13%

I am trying to figure this out because everytime I put in a DVD+RW into my DVD +-RW drive I get an error to please insert a blank disc. Am I am using the right disc? Does anyone have suggestions?


A:Imagemixer 3 for Panasonic camcorder

Hello Elizabeth, Welcome to TSF!

There are a couple of ways that might help you with this issue.

Method One: Remove the registry entry

Warning: Serious problems might occur if you modify the registry incorrectly by using Registry Editor or by using another method. These problems might require that you reinstall your operating system.

Please Note: If you had installed multiple CD-writing software products on your computer, you need to uninstall the software products before you remove the registry keys.

1. Click Start, and then click Run.

2. In the Open box, type regedit, and then click OK.

3. Locate and then click the following registry subkey:

4. On the File menu, click Export.

5. In the File name box, type savedkey, and then click Save.

6. Click the REG_MULTI_SZ data type UpperFilters, and then click Delete on the Edit menu. When you are prompted to confirm the deletion, click Yes.

Note: If this data type is missing, go to Method 2.

7. Click the REG_MULTI_SZ data type LowerFilters, and then click Delete on the Edit menu. When you are prompted to confirm the deletion, click Yes.

8. Quit Registry Editor, and then restart the computer.

Method 2: Replace the existing driver

1. Click Start, and then click Control Panel.

2. If Control Panel is in Category view, click Performance and Maintenance, and then click System.

If Control Panel is in Classic view, double-click System.

3. On the Hardware tab, click Device Manager.

4. Click the drive with the question mark (?) next to it.

5. On the Action menu, click Uninstall. When you are prompted to confirm the removal, click OK.

6. Repeat steps 4 through 5 for any other drives with question marks.

7. On the Action Menu, click Scan for hardware changes.

Close all windows and reboot the computer.

Please give these two methods a try and post back with the results.

Kind Regards,
Relevancy 39.13%

Hi, is anyone able to help?

I have a problem with connecting Panasonic Viera TX-32LXD70 to PC with Windows 7 and graphic card MSI Nvidia Gforce GTX560 TI.

I have tried using Mini HDMI to HDMI cable, and also DFI to HDMI, but none of them work. I have only one HDMI socket in the TV. And on the card there is only mini HDMI and two DFI sockets.

In Nvidia Contro Panel there is an option to find the second screen, but it does not detect it. I have also tried to find it in Screen Resolution options, but it also does not see it.

I have had this TV connected in the past, but since upgrading to Win 7 (and also buying a new pc) I have been unable to do it.

I have also all the recent drivers for the graphic card.

Any help would be greatly appreciated.

A:Problems with detecting Panasonic TV by PC

Did you select HDMI in the Panasonic's on-screen input signal menu?
Relevancy 39.13%

My computer will not let me change the printer to online, it will not print at all at this point, not even saved documents, please help

A:Panasonic DP-C262 offline

in printer properties check it is listed on the correct port
Relevancy 39.13%

Our problem is we have a Panasonic KXL-807A external CDrom to hook up to a Toshiba Portage 7020 running Windows XP Professional with a FAT32 file system. This is not on an internet connection. All indications show the drivers for this product are not compatible with XP, but the wealth of collective information on this site has proven my indications wrong on many occasions. Can anyone point us toward some drivers that might work with this device?
Thank you
Relevancy 39.13%


I have a Panasonic lumix DMC-FZ18 and I can not increase shutter speed. It stops up to 8 in the mode is "S" and "A" (shutter & Aperture) and up to 60 in the mode "M" (Manual) Previously it was not like that. Now I'm unable to increase my shutter speed. Another problem is time delay in taking pictures it's showing seconds before the shutter fires. Previously it was not like that. Kindly help me.

Thanks in advance,

A:Panasonic Lumix DMC-FZ18

I&#8217;m not sure what you might have been doing before, but the specs for the camera show that in shutter and aperture priority it is limited to 8 seconds and in full manual it is 60 seconds: It appears to be working properly.

Long zoom shots with difficult contrast will cause most non-DSLR cameras to hunt for focus. On a bright day shooting a normal scene at wide angle, if it is taking several seconds to focus there is something wrong and you might contact Panasonic for repairs. But if it is just happening sometimes and especially at zoom it is probably normal.
Relevancy 39.13%

Below is what i see in my browser network page and what i see on my network map.
The tv(Panasonic viera) connects both wireless and via ethernet to the internet.
The tv sees the media player but when opened there are no files to play?
The technicolour is the router which is what the tv says is the media player?
The media is set to allow media streaming and the network drive is open.
Can someone please tell me what im doing wrong?

A:panasonic tv-cant see media from network

and i get this when i try play too
Relevancy 39.13%

If you own a camera or camcorder that uses SD cards, chances are you've confounded yourself at some point trying to figure out how fast a card you need (or want) for your device. This is complicated by a lot of factors, primarily that the Class specification defines a minimum sustained transfer rate--Class 6 is 6 megabytes per second, Class 10 is 10MBps, and....
Relevancy 39.13%

Hi, I bought the Panasonic Lumix DMC-FZ35, it is very convenient but I find that a lof ot pictures come out blurry if there is even a very small movement, can anyone tell me how to configurate it or what to do to avoid this?

Relevancy 39.13%

Hi, everyone! Using Windows XP here with a Panasonic KX-P1124 and have a strange issue: we're printing on a continuous stencil paper (for part marking) and every time the label is done printing, the printer feeds about 5 labels through. We have to rip off our label, then move the paper down, then reload. Takes awhile to work through if you are printing more than one label. I know this is an old printer but it works well and we need the stencils. Does anyone have the same issue or knows of a fix? We've tried to change the form feed to "not available" but it doesn't work. Thanks in advance!

A:Panasonic Dot Matrix printing in XP

change the page size on your physical printer. sounds like the default is not set to the size of your label.
Relevancy 39.13%

Hi Guys.

I have a Lumix DMC-FZ5. When I turn the camera on, the zoom extends and I can operate the shutter button. However, nothing else works. The battery is fully charged. I would appreciate any advice.

Many thanks!

A:Panasonic Lumix problem.

I think that is the same model as mine. There is a mode that you can turn on and off to use the built in viewfinder only. If that is turned on then you can't see anything on the crystal display and it will appear that your camera is not working. It's a small button above the crystal display that you just press and your camera should work normally.
dvr surveillance system
Relevancy 39.13%

I am making some yoga dvds using image mixer3 for panasonic.
When the dvd's are less than 65mins they write into disc. For my longer dvds - 75min ones- I have bought printable dvd+R 8.5GB (double layer, single sided) however image mixer fails to write. The writing starts normally and everything looks to be coming along just fine then at some point it stops writing, ejects and the messege is "fails to write" (or something similar)
I really want to record some longer dvds(75mins)- I have tried and tried but am stuck. I need help
Jackie - good at teaching yoga - hopeless with computers!

A:image mixer 3 for panasonic

What is the make and model # of your DVD burner? Is it a Double Layer (DVD9) burner? What are the brands of blanks? What is the burn speed you are using to burn DVD's? Are the blanks DVD+R, DVD-R or DVD-RW?
Do not use generic blanks. Use only named brand blanks. (Phillips, Sony, TDK etc) I have most luck with -R blanks and not the +R discs. -+RW discs are harder to work with because they have to be formatted before they can be used and they need to be finalized before they can be ejected. You should burn at the slowest speed for your media. Burning at too fast of a speed will fail the burn or make it so it cannot be played without skipping.
Relevancy 39.13%


Just bought a panasonic plasma with an SD card slot.

2 Problems;

1) I can record programmes on to the card, but when I put the card in my Sony Vaio they won't play!

2) Similarly, the Plasma allows you to view photos on screen, off the SD card. I use a Sony T9 as a camera, so after downloading to my computer, I then download images onto a SD card. The Plasma wont display them?? The TV instruction says a folder DCIM will automatically be created for the photos. Could it be that I have managed to get images onto the card, but not in the right place. How do I create a DCIM folder on the card??

Any help would be appreciated

A:SD cards and Panasonic Plasma

1) What format are the files in? It might that its in a propriety format, or you dont have the right video codecs on your Sony Vaio.

2) You probably just need to create a folder on the SD card much like creating a folder on your harddrive. and have this named DCIM

The model number of the panasonic would be handy if you have more questions.
Relevancy 39.13%

I have a friend with a toughbook laptop and we have taken it apart to the core to find that the cpu is a standard 2.8v socket 7 p166mmx pentium cpu. we cannot find jumpers anywhere and wonder if there is any way to upgrade this chip to a 2.8v p233mmx or to one of these low volt socket 7 p266mmx cpus.

We would like to put in a k6-2 but see no way of configuring the chip. These units came stock with 100-166mhz pentium laptop and standard cpus so there must have been a way of "jumpering" them to run each chip

Any thoughts?


A:Panasonic CF-25 notebook cpu upgrade

Hmm, we just installed a pentium MMX 200mhz cpu and it works great but only at 166mhz like the old cpu.

There must be a way of reconfiguring the board with different multipliers as the laptop came with anything from a p100 to a p150. but the bios has no options for this and the motherboard itself does not have jumpers to change.

Any ideas?
Relevancy 39.13%

I have a vidoecam suite 2.0 for my panasonic camera. I am having problem importing the video to the computer. I am running on vista home edition. Do you have any suggestion as how to fix this problem
Relevancy 39.13%

well, the title says all
my panasonic cd stereo system sa-pm21
"Top Loading CD Player, cassette deck, AM / FM tuner
MP3 Playback with ID3 Tag
CD-R/RW Playback
Full Range Bass Reflex Speakers
Remote controller"
When i turn it off(the press of the button) for example, i am going out of my room(about 5-8 secs after i turn it off) it turns on, but not like a player, it goes like this:
Turns on
Some line goes thru screen and it looks like it is "checking" that all the text is ok, all the text(id3 tag,mp3,tune,vocal,hello,good bye and all this stuff goes on infinitive loop and reshows and reshows. sorry if you missunderstood i will try to make some pics then

Thanks for reading

A:My Psycho Panasonic player

Bump, 3 days waiting
Relevancy 39.13%

Just got a gift from a friend. A Panasonic CF48E. Put a new HD in it, Installed WIN XP pro, and was happy... NO sound.. Looking at the Control panell, looks like the Multimedia Audio Controller has a ( ! ) in the yellow circle. Downloaded what seems to be the correct drivers for it, ir starts to install but mid installation I get the Blue SOD, that says portcls.sys, and it shuts down, and restarts the laptop real fast ( no time to read what the blue screen says..
Anyone see that problem before?
Any solutions? I read all kinds of suggestions, but none work.
Help please.

A:Panasonic CF-48 E Portcls.sys BSOD

Try here:
Relevancy 39.13%

pls. help me i need drivers for notebook Panasonic CF-X1.thanks