Windows Support Forum

Getting a "user profile service failed the logon. user profile cannot be loaded" message

Q: Getting a "user profile service failed the logon. user profile cannot be loaded" message

It is an HP computer that my brother brought over because it wouldn t boot It was giving me a quot bootmgr is compressed quot message So I got my Vista repair disc and uncompressed his drive That got rid of that message but then it was giving me winload exe errors So I fixed that and FINALLY it booted up but when I clicked on his user account to log on I get this error message I have searched for answers I came across a fix where you edit the registry if there is a duplicate entry in the profiles a loaded" profile cannot the service Getting message be logon. "user profile user failed section but there isn t an extra one I can boot into safe mode but I get no administrative tools no ability to see the event viewer or manage users idk if this is normal I did a command I found to make the default administrator account active or something like that and now when it boots up there is his user account Getting a "user profile service failed the logon. user profile cannot be loaded" message and an admin user If I click his user to log on I get the error message If I click the admin account it loads but it loads telling me the Vista copy is not genuine Anyone have any idea how to fix this Why is the admin account telling me Vista is not genuine Thank you

Relevancy 100%
Preferred Solution: Getting a "user profile service failed the logon. user profile cannot be loaded" message

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Getting a "user profile service failed the logon. user profile cannot be loaded" message

I came across a fix where you edit the registry if there is a duplicate entry in the profiles section but there isn't an extra oneExtra one? you mean the .bak key?Did you follow this guide?http://support.microsoft.com/kb/947215

http://www.bleepingcomputer.com/forums/t/466518/getting-a-user-profile-service-failed-the-logon-user-profile-cannot-be-loaded-message/
Relevancy 21.93%

Does anyone know of a way or download I can use to remove an existing service tag on a Dell system board? Working on a Dell Latitude E7250.

Your feedback would be much appreciated.
 

A:Dell Service Tag removal on a Latitude E7250/7250 (Late 2014)

WHY? The tag is fundamental to getting parts for that system.
 

http://www.techspot.com/community/topics/dell-service-tag-removal-on-a-latitude-e7250-7250-late-2014.215604/
Relevancy 19.35%

I have a three month old Dell Dimension GHZ P Gig Ram and a gig SATA Hard Drive When I got the computer I used the files and transfer PC Relocator utility And had in Error system drives did hard Message: disk find Setup not your installed any a bunch of unwanted extras that came with it I m having a Satellite Internet system installed and they wanted a clean install of windows XP So I opened the owner s manual and got out the reinstallation disk and the problems began By the way Dell tech support s only response has been to say gee that s not right and would send a tech sometime after Christmas Anyway heres step by step what I did I boot to the Dell reinstallation disk Error Message: Setup did not find any hard disk drives installed in your system The windows setup screen appears and loads files The next screen says welcome to setup and offers three options -to setup XP press enters To repair XP press R to exit without installing XP press F I press enter and the following message comes up Setup did not find any hard disk installed in your computer Make sure any hard disk drives are powered on and properly connected And any disk related configuration is correct ect Press F to quit It dose this if I try repair also Dell had me check the connections to the HD and Motherboard They re good And debug the hard drive No luck Everything worked fine until I put in the reinstallation disk Any help would be welcome nbsp

A:Error Message: Setup did not find any hard disk drives installed in your system

During Setup, it will ask you if you need any extra drivers such as SCSI (or SATA in your case). If so, press F6. Now you are in trouble, because SATA drivers come on a floppy and new(er) Dells don't have a floppy anymore. Borrow a floppy-drive from another PC and install that in your Dell.
Setting up with the Dell disks, I'm not sure if they are RESTORE-disks or full XP-disks.
That may cause another problem.
 

http://www.techspot.com/community/topics/error-message-setup-did-not-find-any-hard-disk-drives-installed-in-your-system.18329/
Relevancy 21.07%

I have been having this issue for about 2 weeks now. Ive literally tried everything including uninstalling/reinstalling network card, restore points (there are none), a windows update download, and reformatting the hard drive (wont let me). Any help is appreciated. I cant afford a new pc or any new hardware at this time.
 

A:"Failed to query TCP/IP settings of the connection. Cannot proceed."

failed to query tcp/ip settings of the connectionClick to expand...

what did you do when this occurred?

Describe network equipment {modem, router} ISP, and your system.

Connect it all together, get a command prompt, enter ipconfig /all >myTcp.txt
and come back here and paste the contents of myTcp.txt as your reply
 

http://www.techspot.com/community/topics/failed-to-query-tcp-ip-settings-of-the-connection-cannot-proceed.177223/
Relevancy 23.22%

A while ago, after accidentally opening the Store app, Windows forced me to restart to install Windows 8.1, which I was unable to weeks before because of driver issues. I didn't need Windows 8.1 yet, so I didn't download it before then.

However, during the installation, it failed (again) due to either my antivirus or the aforementioned driver issues. Upon logging back in, my computer was unable to find any WiFi networks. Seeing as I live in the middle of a densely populated city, this isn't possible. Plugging in an ethernet cord still works, so no issues with that adapter or my home internet. I checked all the drivers for my WiFi adapter, and my Ethernet adapter, and both are up to date and display as working properly. Restarting several times didn't seem to fix this issue, and using system restore didn't seem to work either. I used the Troubleshooting tool, and that didn't give my any helpful advice or answers, so I got nothing.

What can I do to fix this issue?

For reference, I have a Broadcom 802.11ac Network Adapter, Driver Version 6.30.95.14, and a Qualcomm Atheros AR8151 PCI-E Gigabit Ethernet Controller, Driver Version 2.1.0.7.
 

A:Unable to connect to WiFi after failed Windows 8.1 update

Never mind, it seems to have resolved itself overnight after I put it to sleep for several hours.
 

http://www.techspot.com/community/topics/unable-to-connect-to-wifi-after-failed-windows-8-1-update.210268/
Relevancy 43.86%

Hello,

I bought a R9 270X by XFX. My current specs are:

CPU: AMD A10 7800k (Standard Clock Speeds, Graphics Disabled)
RAM: 4GB (2 sticks, both working)
Motherboard: FM2, Gigabyte
PSU: 500 watt 80+ Cert Silver
HDD: 500GB WD Blue

So the issue is that the R9 card consistenly crashes out of all games no matter if I uninstall the drivers or reinstall them. I have tried removing the drivers through catalyst control center and through application based tools (DisplayDriverUninstaller). Once I uninstall and reinstall, it works, until the computer is restarted and then rinse and repeat.

Is this the card saying it is dying? If so it is a weird way of graphics card dying.
 

http://www.techspot.com/community/topics/r9-270x-doa-or-user-error.209138/
Relevancy 23.22%

Hi, am prepared to be labelled "thick as mince" however I wonder if anyone can advise how to proceed with the following: Replaced cracked laptop screen on a TM99, on first start up after replacement, the screen worked.....woohoo!, however.....on next startup, there was nothing, no lights, no start up screen...nada. Replaced new with original screen, which although cracked had worked, and it too now failed. Any ideas? The cable for the screen was seated properly and securely, nothing else was moved so am struggling to establish a reason for this non conformance. Could it possibly be a jammed "lid closed" switch? If this is potentially the culprit, anyone know whereabouts it is? Thanks
 

http://www.techspot.com/community/topics/packard-bell-tm99-laptop-failed-screen-replacement.208913/
Relevancy 22.79%

About or months ago I switched to a new internet provider whom also sent me a new modem Problem is is that To My Party Modem How 3rd To Connect Provider's New My Service? this new modem prevents my burglar alarm s dial out alert system from contacting my nominated phone numbers during an activation test If I turn off the modem there is no problem the alarm works perfectly This would be fine except that my brother in law lives next door and uses my internet connection so it is inconvenient if I m away and have to switch the modem off to have the alarm fully functional Prior to the provider change over I was using a rd party TP-Link TD-W ND modem with my prior service provider This modem caused no problems at all with the function of the burglar alarm when left on Therefore I would like to use the TP-Link modem again but I can t get it to work on the new service From memory the modem that was supplied by the new provider was basically plug and play and all I did was just cable it in and there was no keyboard work required This is why I don t know why the TP modem doesn t work since I didn t change anything Evidently there are some How To Connect My 3rd Party Modem To My New Provider's Service? configurations that do need altering but I haven t got a clue Any help or ideas Tom nbsp

A:How To Connect My 3rd Party Modem To My New Provider's Service?

Hello there, You need to apply the appropriate ADSL and network settings on the modem so it can connect to your new provider's network. The ISP support should provide those. Hope you get it up and running soon.
 

http://www.techspot.com/community/topics/how-to-connect-my-3rd-party-modem-to-my-new-providers-service.207609/
Relevancy 21.07%

I have a mystery on my hands. I received a Bluetooth speaker as a gift. The BT-4.0 adapter plugged into my computer (USB-2.0 port) detects it (as a "Bluetooth headset"), but when I try to select it as my output device (from the "Sound" Control Panel), Windows reports it as "Disconnected".

If I open "Devices and Printers" and right-click the "Bluetooth headset" icon, I get an alert that the device "Failed to initialize".

I've tried rebooting, tried a different BT adapter, updated my BT drivers off the makers' website, Device Manager shows everything is connected & working (including "Bluetooth Audio").

64bit Win7 Home. Inateck BT-4.0 usb adapter. Speaker is a "MicroBoom" BT v2.1:
Any ideas?

PS: Eliminated the obvious. Speaker is fully charged and works just fine with my phone.
 

http://www.techspot.com/community/topics/bluetooth-headphones-paired-but-disconnected-failed-to-initialize.207624/
Relevancy 24.51%

Please somebody help me asap I tried to change the public Dns to google's one but failed to do so now I cant reverse it I clicked auto obtain IP and Dns but still cant connect to my router, I beg you somebody help me.
 

A:DNS change failed

I'm far from an expert on anything internet, but I had a similar experience when Verizon changed servers on me, and my router failed to track it.

I called Verizon tech support and they reconfigured the router for me while I was on the phone.

You can also try opening a command box and type, "ipconfig/release", wait a few moments and type, "ipconfig/renew" (obviously without the quotes). That will only work if the issue is with the computer, but not the router.

Don't despair though. Someone who actually knows what they're talking about could be along any minute...
 

http://www.techspot.com/community/topics/dns-change-failed.207375/
Relevancy 43%

Hi,

I am playing around with Server 2012. If I want to have a laptop configured for "at office use" with option to go on site, what would be the best way to do that in order to retain access to shared locations on server that is "at office"?

Should I create a standard windows account unrelated to my domain controller, and have them VPN regardless if they are in office or on site? Or is there a way to have a laptop configured for domain use, where it will still be functional (local computer use) on site outside of the office, even without internet connection (I know you can's VPN without it).

Thanks
 

A:Best way to set up local and remote user with Server 2012

Well this is kind of interesting. You can in fact use a domain laptop away from the local network as long as you have logged into int once on the domain so it can cache your password for future log ins. Now comes to the more difficult part of your question's. Accessing files remotely while not online, you can set up what is called offline files. Offline files will give you acess to your files away from domain network. So if you choose to do offline files any changes made to the file while away from the domain controller where you shares are set up will have to be synced once back on the domain network. So if you make changes to lets say docA while off domain network, once you get back to domain network you will have to sync offline files to the server to update any changes you have made. This set up would not require offsite network but can bring problems when syncing once you reconnect on domain. But now lets say you have the same shares and now you have multiple individials with the same access to the shares. Say you make changes to docA and the other person makes changes to docA while offiste. Once you both reconnect and sync to server you could have issues with data such as duplicate information or doc merging. VPN would be the best option for sure....
 

http://www.techspot.com/community/topics/best-way-to-set-up-local-and-remote-user-with-server-2012.206403/
Relevancy 21.93%

Printer Problems in Windows XP sp3
Dell Personal Printer all in one A940
After trying to speed up an older computer running Windows XP
I may have cut off the Print Spooler (or it was already off ?)
I went back to Services dialog box & selected Print Spooler
I clicked the "Start" link at left of service list & got a message tgat said
"could not start print spooler service on local computer error 1068 The dependency service or group failed to start."
Printer is still not working can anyone help?
 

A:Could not start print spooler service on local computer error 1068

On Win/7 the dependencies are

HTTP

Remote Procedure Call (RPC)
DCOM Server Process Launcher
RPC Endpoint Mapper
Manually start each on and set to AUTOSTART as you go.
If one fails, then that is the root problem.
 

http://www.techspot.com/community/topics/could-not-start-print-spooler-service-on-local-computer-error-1068.206839/
Relevancy 42.14%

I bought a ADSL Modem D-Link 2730U

We are connecting to the Modem via Laptop, PC, Phone,... at the same time.

I want to know how can I monitor network(Receive/Send) for each user who connected to the Modem.

Can I do such thing?
 

http://www.techspot.com/community/topics/monitoring-network-for-each-user-connected-to-adsl-router-modem.206910/
Relevancy 22.36%

I have a Dell Latitude D630 and the motherboard died, It's out of warrenty so I bought a Motherboard on ebay. The Bios Service Tag does not match the number on the bottom so I would like to chage it to the correct one. How can I do this?

I read about a DST CD = Dell Service Technician CD that has this option but I can't find one.

It's not a real important thing but when I use the Dell System ID application it reads the Bios Service tag and not the real system tag that Is registered to me.
 

A:How to change the Service Tag in a Dell Latitude D630 BIOS

http://en.community.dell.com/support-forums/laptop/f/3518/p/19258463/19430485.aspx
 

http://www.techspot.com/community/topics/how-to-change-the-service-tag-in-a-dell-latitude-d630-bios.165117/
Relevancy 43%

I have joined a computer (PC1) to a domain control server (2008), and user able to login using their domain user account - although recently I have found out that even though the computer (PC1) do not connect to a server, user still able to access using their domain account.
Is there a way for me to restrict domain account user from accessing the computer (PC1) if they are disconnected from server?
Hope my explanation make sense to you guyz.

Thank in advance
 

A:Prevening domain user from accessing Computer

Lots to be considered. Joining a domain is intended to give the company admin configuration control of all the company users.
This is normal, expected and even proper for the company to do this.




restrict domain account userClick to expand...

hmm; only the company admin should be able to do this and almost always it is done using some scripts, NOT by loggin into your PC. So - - who is accessing your PC remotely, the admin - - how do you know this occurs?

PCs joined to a domain usually get a replacement for PC Login - - the network form and that creates a link to the domain controller.
 

http://www.techspot.com/community/topics/prevening-domain-user-from-accessing-computer.204127/
Relevancy 22.79%

Had an AMD HP G62-227CL laptop that overheated and required motherboard replacement with similar Intel motherboard. Old board clocked at 2.2 MHZ .. new one is 2.0 MHZ.
Board I got from Ebay works but now computer believes that it is a Compaq CQ42 Laptop. Do not know the model number, which I would need on HPs site to download BIOs upgrades.

Is there a way to tell which bios I need or what model I now have?

Thank you,

Steve
 

A:Replaced Failed Motherboard.. now how do I determine model number and which BIOS to download?

Finding a bios update rather then the one hp would give for this board. Would be next to none.
You could check a few of the support pages for this model. Which their are a lot Of
Maybe find out the motherboard you have bought.

HP Support, Drivers, Contact and Help Forums | HP ® Support
 

http://www.techspot.com/community/topics/replaced-failed-motherboard-now-how-do-i-determine-model-number-and-which-bios-to-download.203956/
Relevancy 22.79%

Good day chaps, yesterday night I was casually playing a game (Aion > mmorpg) and I decided to put some music on(it was on browser, YouTube), when I pressed alt+tab to change it it started flashing telling me the exact issue : AMD DRIVER CRASHED AND FAILED TO RECOVER.

I got a bit scared when it gave me a blue screen, so I thought of asking for any tips or clues why it does that~

For unkown reasons, I can't upload the .dmp file saying either its empty, or The uploaded file does not have an allowed extension.

Hope you can help me and thanks a buck!~
 

A:Dell Inspiron 3512 AMD Radeon HD 8500/8700M crashed and failed to recover

Upgrade the driver and see if this helps.
 

http://www.techspot.com/community/topics/dell-inspiron-3512-amd-radeon-hd-8500-8700m-crashed-and-failed-to-recover.203323/
Relevancy 20.21%

when i start my computer, it goes to the gateway start page, and after a while (it's quite slow) it goes to the black page, and this is what it says:

Intel Boot Agent FE v4.1.10
Copyright (C) 1997-2003 Intel Corporation

Intel Boot AGent PXE Base Code (BA 1210BC-GW1)
Copyright (C) 1997-2003 Intel Corporation

PXE-E61 media test failure check cable
PXE-M0F exiting Intel Boot Agent

Reboot and select proper boot device or insert boot media
in selected boot device.

it just stays on that screen until i do a CTRL ALT DEL, then it goes back to the Gareway screen and after about 30 seconds finally boots up and i get the Windows XP start up page, and it opens up my desktop and i can continue .

Can anyone tell me why this started happening and how to correct it?
 

A:Computer start up is bringing up boot agent message

How old is the computer, or the hard drive. It appears you have a failed or failing hard drive.
 

http://www.techspot.com/community/topics/computer-start-up-is-bringing-up-boot-agent-message.150663/
Relevancy 43.86%

I finally found out why my wireless keyboard didn't work as I mentioned in another thread several months back.
Evidently the USB wifi thingy was in a USB port that didn't work. When I was going thru this thread http://www.techspot.com/community/topics/unknown-device.202706/
I removed it thinking it might be the unknown device.
Anyhow, I've been trying to find the manual for my wireless KB & can't find it.
I'm not sure which number(s) I need. MS PART NO. X820309-001
Serial number or Product ID? Here it is

 

A:MS Keyboard user manual help

Well, I went here http://www.microsoft.com/hardware/en-us/d/wireless-keyboard-3000 & despite the fact its default language is English, the downloads are in any language BUT.
 

http://www.techspot.com/community/topics/ms-keyboard-user-manual-help.202759/
Relevancy 28.81%

Hi I have an older PC which I gave to my mum It originally ran Vista but I bought and installed Windows Ultimate around weeks ago after it had been inactive for months It was running great but a couple of weeks ago it just started hanging for no real reason Also at startup it would say that the computer had not been shut down properly even if it had This was only when it was switched off at the wall not after checksum defaults loaded" replaced error battery after - "cmos a restart or when the PC was left plugged in and switched on She only "cmos checksum error - defaults loaded" after battery replaced uses the PC to look at You Tube and some webcams from her grandkids and that s it she s not very computer literate Initially I left Windows repair to run overnight but when I looked at it the following morning it was still in the repair screen so I assume it had hung I spoke to a local repair shop and they suggested I test the RAM test the hard drive and replace the CMOS battery The RAM and hard drive checks went without any errors and after I replaced the battery the hanging stopped I played with the computer all evening and shut it down as normal and switched it off at the wall Next day I thought I would start it up just to check it and I was faced with a quot cmos checksum error - defaults loaded quot message I thought that was strange but maybe the battery was dead so I swapped it over with one from my perfectly working desktop to try it out and my desktop worked fine but after shutting down my mum s one it had the same problem when power was pulled So battery was ruled out Incidentally I will say that I reset the BIOS date and time every time I was faced with the error following up with a save and exit It worked fine until I unplugged the computer I then moved on to the BIOS and set it back to default and the same again After this opened the case and used the jumpers to reset the BIOS to default again but no difference My mum will not leave it switched on at the wall constantly in case it self-combusts same with her washing machine TV lamps etc otherwise I would just do that and ignore it Is there anything else someone can suggest that I try System Shop bought by Mesh Motherboard is an ASUS PSN-E SLI gb Ram - samsung gb hard drive - ASUS Thanks for any help nbsp

A:"cmos checksum error - defaults loaded" after battery replaced

I must add that the PC is the same as when I bought it new from the shop, except for adding a Creative Labs sound card (approx 2012) and installing Windows 7 (around 6 weeks ago). All Windows updates are downloaded and installed.
 

http://www.techspot.com/community/topics/cmos-checksum-error-defaults-loaded-after-battery-replaced.201304/
Relevancy 67.51%

I have networked PCs before many times successfully so this is not my first time trying to network PCs in a home environment Though I m wondering if Windows is part of the problem I would have thought that for sure until one of the name credentials bad password? user with unknown even correct failure: or "Logon new laptops running W would not connect to any of the other three PCs Laptops running W Yet these other three W PCs Laptops CAN connect to this laptop Then it gets a little more "Logon failure: unknown user name or bad password? even with correct credentials interesting this same laptop that couldn t connect to those three W PCs Laptops CAN connect to a Windows desktop and a XP Laptop and those two can also connect back to it without issue It s almost like my network is divided in half and only half can talk to each other But then when I thought it couldn t get any more interesting I realized the first three W PCs Laptops can talk to the others it s just that the others W Laptop W Desktop XP Laptop can t talk back to them without getting the error quot Logon failure unknown user name or bad password even though the username and password are correct I don t fully understand this error because on the surface it s just WRONG My username and password are correct but it appears something somewhere is interfering or hijacking the authentication process Three of the computers laptops are brand new just purchased last week and setup this week The HostPC is also fairly new just purchased last month I am not using a HomeGroup and have removed all computers that were part of a HomeGroup I have enabled file sharing and network discovery and enabled Use user accounts and passwords to connect to other computers on all PCs I have DSL and am using the wireless modem provided by my ISP which has router functionality built into it It is a Sagemcom Model F ST N All computers are connected wirelessly Time is correct on all PCs I cannot use Group Policy since they re all Standard or Home edition DHCP is enabled and all computers are on the same subnet using the x range of ip addresses The six computers are as follows I figured this may make is easier to visualize the layout HostPC HP Desktop W PC Name DrsBlend U N DrsBlend p w not showing my real password PC HP Laptop W PC Name DrsBlend- U N DrsBlend P W PC HP Laptop W PC Name DrsBlend- U N DrsBlend P W PC HP Laptop W PC Name DrsBlend- U N DrsBlend P W PC HP Desktop W SP PC Name DrsBlend- U N DrsBlend P W PC Dell Laptop XP SP PC Name DrsBlend- U N DrsBlend P W Every PC stated above has the same user name and password and is logged-in with the username DrsBlend and the password The quot Logon failure unknown user name or bad password happens when trying to access HostPC PC or PC from PC PC or PC The HostPC can see and connect to all the PCs but only PC and PC can talk back or access the HostPC It s like the HostPC and PC and PC are in their own little clique and can talk back and forth to each other Those three PCs can also talk to PC PC and PC as well but PC PC and PC cannot talk back to them HostPC PC PC Profile corruption I would have entertained that thought but the fact the first three PCs can access and talk to one another kind of defeats that idea and the fact the PCs were just recently setup Firewall Disabled and disabled TrendMicro with no change With them on off the first three PCs can still talk to each other and the rest of the PCs Anyone have any additional suggestions nbsp

A:"Logon failure: unknown user name or bad password” even with correct credentials

I experienced a similar problem when I was trying to network my 8.1 machine the host network. As you say the host PC can see and connect to all of the machines, but not the other way around. Not sure if it is the same in your situation but I found that Microsoft's idea of network sharing on the Windows 8 class of OS differs greatly from previous OS's in that you can connect to it from an external host, but when trying to do the other way around it doesn't "see" the PC in question due to differing network sharing protocols included in the OS.

Anyone feel free to correct me if I am wrong, I am speaking only from what happened with my network.
 

http://www.techspot.com/community/topics/logon-failure-unknown-user-name-or-bad-password%E2%80%9D-even-with-correct-credentials.201313/
Relevancy 43%

I have a Dell Inspiron 2200 still running XP that has an administrator account, as well as a guest account (where the important docs I need are stored). It has a faulty DC jack, and I plan on having it recycled due to the fact the repair would cost more than the computer is worth. If I remove the hard drive and put it in a USB housing, would I be able to access the info stored under the guest account without any problems?
 

Relevancy 23.65%

When I am accessing wifi network I get dns failed error message. what is the problem? pls help
 

A:DNS failed error in WiFi network

Can you connect using a wired connection?
Get a command prompt and enter
ipconfig /all >myTCP.txt​then open that file, copy the contents and paste into your follow-up
 

http://www.techspot.com/community/topics/dns-failed-error-in-wifi-network.200577/
Relevancy 19.78%

How serious is this? I'm running on a Dell laptop with a Intel(R) ICH9M-E/M SATA AHCI Controller.

It is saying that I should back up all of my important files because of possible hard drive failure.

PLEASE HELP? I don't know how to fix this because I don't know what it means.
 

A:Hard drive is reporting a Smart Event error message

It telling you your hard drive is on its way out. You can try running a check disk and see if that helps. But to be on the safe side you should back up your personal files.
 

http://www.techspot.com/community/topics/hard-drive-is-reporting-a-smart-event-error-message.199432/
Relevancy 43.86%

I issue An logins with user have a former company PC Earlier I was attempting to remove the company An issue with user logins domain from it so that I didn t have to An issue with user logins log in as the previous user every time just to get to the desktop So I changed the computer name right click my computer properties computer name I then clicked on Network ID and set to this computer is for An issue with user logins home use and then it went wrong I restarted the computer as instructed and tried to log on as the user as before but it is telling me the password is incorrect The username is correct and so is the password It s clear that whatever I did with the Network ID has caused this I have logged on as administrator but need to access the other user due to the saved files on there etc Can someone help me revert back access that user account from admin Is there a way to completely detach the PC from the previous domain so that it is like a normal home PC with no log in Thank You nbsp

A:An issue with user logins

Administrator account has permission to access files from other users. Just go to the C:/Users section or whatever.
 

http://www.techspot.com/community/topics/an-issue-with-user-logins.198449/
Relevancy 22.79%

I use google drive as my primary online backup, can anyone suggest a second good online backup service which is both
SECURE and FREE?

that way if google loses my data it's still on a second server and my harddrive.
thanks
 

A:Any recommendations for secure online backup service?

None are secure and free. You can pay, but then your 'security' is still not 100% guarantee'd.

But, be assured, Dropbox/Google/Microsoft aren't going to lose your data ...
 

http://www.techspot.com/community/topics/any-recommendations-for-secure-online-backup-service.198239/
Relevancy 20.21%

Hey guys I ve recently installed a new hard drive on my desktop PC It s a GB quot drive that I removed off of a new laptop I got The drive works great BUT ever since I installed it I get a really annoying drive, hard boot new get message Installed on message every time I boot my machine It s some sort of copyright disclaimer It says the brand of the HDD Hitachi and lists the copyright of the disk management system or something like that It says copyright jmicron com and then quot Hit enter to continue quot The message is displayed maybe for seconds and it disappears on its own so no need to press enter Pressing enter will get rid of it faster So yes Installed new hard drive, get message on boot it s not an error but it s annoying and it adds to Installed new hard drive, get message on boot my boot time I m assuming the exact brand and model of the HDD isn t relevant nor is it the message but if it is let me know and I ll post that information I m not near my PC at the moment Is there an option in the BIOS or msconfig I Installed new hard drive, get message on boot could change to get rid of this Intel Core i GHz GB DDR RAM Mhz GB Samsung SSD Main drive additional HDDs GB GB and GB ATI Radeon HD GB W Power Supply W nbsp

A:Installed new hard drive, get message on boot

A little help with this, please? I'm baffled, I'm no computer newbie and I've installed many-a hard drives before, but I had never gotten this message after installation. The exact model of the hard drive is:

Hitachi HTS547575A9E384

This is a picture of the message:
 

http://www.techspot.com/community/topics/installed-new-hard-drive-get-message-on-boot.197890/
Relevancy 24.08%

Networked for years in XP machines.

I read help files how to but, could not make it work.

My w8 win wxplorer list shows under Network the VISTA LAPTOP. When I click on it it asks for user name/password but, what name & password?.

I naver had any name/password for my networks.

Any body knows what does it refere to?
 

A:Failed to network w8, xp & vista

Hey nichos. Was a name and password used when this Win8 system was first set-up. When I first unpacked a WIN8 laptop, it threw me for a loop as it requires a username and password to unlock it.
 

http://www.techspot.com/community/topics/failed-to-network-w8-xp-vista.197366/
Relevancy 22.36%

Hi,

I have Windows XP SP3 installed on my desktop and suddenly my LAN/NIC is not receiving and sending packets from my network. The DHCP Client Services and TcpIP services wont start it gives error from the above.

From the device manager of non-plug and play drivers, the tcpip protocol driver, ip network address translator and netbios over tcpip has exclamation point. When I uninstall the drivers and start the services the connection is established but when I shutdown/restart the PC it will came back again the issue.

AFD is running

Below drivers are present in system32\drivers folder.

afd.sys
tcpip.sys
netbt.sys
Any ideas?
 

A:DHCP Client Service Won't Start - Error 1068

Hello,

I update the system and the LAN driver but still the issue exist.

I copy the netbt.sys from a working machine and paste that to the non-working machine. Same problem.

Is there other way resolving this issue aside from repairing or fresh install of the OS?
 

http://www.techspot.com/community/topics/dhcp-client-service-wont-start-error-1068.197233/
Relevancy 32.68%

Hello all!
I regularly have the folllowing line appear when my bios starts up -CMOS checksum error defaults loaded. I am having a problem about CMOS Checksum Error, every time I turn on the computer it will wait about 30 secs before the first beep. Then the CMOS checksum error occur. Some days ago I had changed my battery after that this problem occurs. Please help me. I have a snapshots of the same problem.You can check here: http://wealthamplifier.in/images/cmos1
 

A:CMOS Checksum Error - Defaults Loaded

Could you have installed the battery backwards by mistake? Even though the battery is new, it could be defective.
 

http://www.techspot.com/community/topics/cmos-checksum-error-defaults-loaded.197153/
Relevancy 15.91%

Not sure if I'm in the right section

Just unpluged my m audio delta 2496 card to do some other repairs. After reconnecting and powering up I have no sound in Cubase ( In device setup selecting m audio delta driver I get the following Error message "audio engine error could not activate asio driver m audio delta" Now even windows system sounds don't work. Have tried re-installing 2496 driver....no go. Any suggestions would be welcome.
 

A:Error message "audio engine error could not activate asio driver m audio delta"

List any Problem devices

Make sure devices are connected and powered on
Click Start->Run, enter: msinfo32. Click the + sign next to Components to expand it
Click Problem Devices. Anything appear?
If yes, click on it, Ctrl-A to select all, Ctrl-C to copy it, Ctrl-V to paste into next post
On the other hand, if no devices are listed, tell me so
Generate and attach a DirectX report

Click Start->Run, enter dxdiag and click OK
===> If you?re running 32 bit Windows, dxdiag will launch on its own
===> If you?re running 64 bit Windows, you?ll see 64-bit DxDiag. Click it to launch the 64-bit version of dxdiag
Notice progress in lower left window corner
When done, click Save Information button and save as a text file to your Desktop
Click the Upload a File button to upload and attach the file to your next TechSpot post


 

http://www.techspot.com/community/topics/error-message-audio-engine-error-could-not-activate-asio-driver-m-audio-delta.197151/
Relevancy 20.64%

Hi all my brother has a pc at home that he didnt want anymore so he put it in some black bags and I was taking it to the charity shop so they could sell it but the bag split at top of stairs and pc went tumberling down when I looked at it all the metal brackets had come loose from where u can put cards in and the gpu card came out to I put it all back propaly had couple of errors that I sorted but power abit dodgy when switching on. but the main problem is message comes up in task bar saying usb not recognised after plugging anything in any of the ports checked device manager and nothing wrong in there please help ... only 2 was not working before but now none work.. thanks in advance
 

http://www.techspot.com/community/topics/usb-not-recognised-message-error.195740/
Relevancy 43.43%

I have a Windows 7 computer wired into my home network. It has a printer attached to it that I have set to share. I have a windows 7 laptop and an XP laptop. Both 7 machines can see open the shared drives on the XP machine but when I try to access the shared drives of either 7 machine from any of the other machines I am asked to give a User ID and a password. This is a private Home network. I have no passwords set up on any of the machines. I'm trying to set up the printer on the two laptops and I can't access it without the User ID Password window popping up. Does anyone know what the problem is?
 

A:Home Network asking for user ID and password

This is all normal operation for print/file sharing. If you really want sharing without using passwords (imo a security risk), then you need to google for "anonymous sharing"
 

http://www.techspot.com/community/topics/home-network-asking-for-user-id-and-password.194484/
Relevancy 22.79%

I live in India. I have 12 computers in two workgroup (9 and 3), also I have two different broadband plans of 2mbps on both workgroup.

Now I want to join two networks which I can do with a switch (I think). the main issue is that if I joined the two workgroup in a single network how I can run internet on different workgroup separately. in other words I want different internet broadband lines to two workgroup and also want them in a single network.

I run a shop have 9 computers as a cyber and 3 computers for working on a government website. and I don't want that cyber system use bandwidth of those three computers and also want these 3 computers to be on network so that I can monitor them from 1 place.

Thanks....
 

A:Two diffrent Interet service on two workgroup in a network

The key to your issue is where the 9 systems vs the 3 get DHCP replies.
If the 3 systems go to one router, they will get a gateway address of that router AND each system will also get a DEFAULT route pointing to that gateway address.

Here's my IPCONFIG, showing the gateway

Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . : socal.rr.com
IPv4 Address. . . . . . . . . . . : 192.168.0.5
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.0.1

and the routing table that gets created with that connection; notice the line beginning with 0.0.0.0 - - that's the default.

Code:
IPv4 Route Table
===================================================================
Active Routes:
Network Destination Netmask Gateway Interface Metric
0.0.0.0 0.0.0.0 192.168.0.1 192.168.0.5 20
127.0.0.0 255.0.0.0 On-link 127.0.0.1 306
127.0.0.1 255.255.255.255 On-link 127.0.0.1 306
127.255.255.255 255.255.255.255 On-link 127.0.0.1 306
192.168.0.0 255.255.255.0 On-link 192.168.0.5 276
192.168.0.5 255.255.255.255 On-link 192.168.0.5 276
192.168.0.255 255.255.255.255 On-link 192.168.0.5 276
224.0.0.0 240.0.0.0 On-link 127.0.0.1 306
224.0.0.0 240.0.0.0 On-link 192.168.0.5 276
255.255.255.255 255.255.255.255 On-link 127.0.0.1 306
255.255.255.255 255.255.255.255 On-link 192.168.0.5 276
You must make sure that the two routers have different addresses!!!

Then the 9 systems will have their own gateway and route tables.

Assuming the three systems have a router address of 192.168.3.1 and the 9 systems use 192.168.9.1 [the third digit is the number of systems just to make this discussion clear]

then your problem becomes to connect the two networks inside the routing tables of all systems.

MANUALLY, you add a route using
on the 9.system side
route ADD 192.168.3.0 MASK 255.255.255.0 192.168.9.x METRIC 1​on the 3.system side
route ADD 192.168.9.0 MASK 255.255.255.0 192.168.3.y METRIC 1​​That makes TCP see both sides but only resources specifically requested cross from one side to the other - - USING IP ADDRESSES. If you need print/file shares using names, you will need
to add them to the drivers\etc\hosts file everywhere and the shared systems need fixed addresses :sigh:

I am reluctant to lead you down this path UNLESS you are very experienced as this is considerable customization and will need to be well documented.



 

http://www.techspot.com/community/topics/two-diffrent-interet-service-on-two-workgroup-in-a-network.193922/
Relevancy 24.08%

I have try many things but the result is still the same...
already tried restarting the computer.....switching off the modem....
when I disable it.. I cant enable it again.. and when I try to switch off the computer it got stuck at the saving setting or something like that.... even the hamachi network cant be disable... the internet connection was working great last nigh but when I woke up.. this thing shown up... I never adjust any system or add any program before shutting it down last night...
I also tried to go to control panel



ithe ethernet is still enable... I realy need help on this... the wireless is working fine but the cable connection is the problem...
 

A:LAN network conection failed

the wireless is working fine but the cable connection is the problemClick to expand...

Are you trying to get BOTH connected at the same time?
 

http://www.techspot.com/community/topics/lan-network-conection-failed.191371/
Relevancy 55.04%

I just bought an HP ENVY h8-1418 Desktop.


I would like to know the best Low Profile graphics card to replace the integrated HD graphics that came with unit. Some important specs listed might help you give me some options I hope:

1 PCI Express x16 (Gen 3.0 for i5 and i7 Ivy Bridge processors, all others Gen 2.0)

Processor: Intel Core i5 3330

TDP: 77W
Operating speed: Up to 3.0 GHz (up to 3.2 GHz turbo)
Number of cores: 4
Socket: LGA 1155
Bus speed: DMI (Direct Media Interface) - 5.0 GT/s
Memory - 8GB

Intel Graphics Media Accelerator HD Integrated graphics (DX11)

Power Supply
Internal 460W (100V-240V)
 

A:Low profile graphics card options

What is your budget? Also why do you need a low profile card?
 

http://www.techspot.com/community/topics/low-profile-graphics-card-options.191192/
Relevancy 20.64%

Ok here s the history of the problem I have GB Hard drive quot Samsung sp c quot and I am using it since two years with my old desktop system with this S M A R T error at the startup BIOS TWO YEARS BACK I think there are some bad sectors involved at the last part of the HDD space There were partitions initially I e C D E amp F The problem started with partition #83" attribute "1720-SMART failure failing? drive detects imminent hard failed: ... HDD error F with following issues Always took so long copying files into F System got stuck up when some file s folder s from F drive were opened and then automatic restart That time ran CHKDSK on F drive but in the middle of scanning it always restarted the PC automatically Sometimes system restarted when I was copying some HDD error "1720-SMART hard drive detects imminent failure attribute failed: #83" ... failing? random data in the F partition Whenever this restart thing happened at the start up it displayed that there is no primary hard drive detected Then eventually it came back live after - attempts always I also deleted the Partition F and then recreated the partition but same problems persisted YEAR BACK Due to above issues HDD error "1720-SMART hard drive detects imminent failure attribute failed: #83" ... failing? I left the partition F as it was and used others like C D amp E but an year before the partition E started to do things same way F was doing and at that point F was not accessible with error popping The disk is not formatted Do you want to format it now I formatted the partition F and ran following HDD tools afterwards Partition Table Doctor HDD Regenerator Surface tests for C D E was fine but when it started scanning the HDD somewhere in F partition area these tools messed up with something took so long stuck at sectors for long time without repairing it MONTHS BACK I came to know that there are some serious issues in the HDD sectors inside the last GB part of HDD error "1720-SMART hard drive detects imminent failure attribute failed: #83" ... failing? the hard disk I made partitions C D E F G The G partition was for GB space and I never opened this drive since I created it because this will cause same problem what the F was doing before NOW I don t have much issues with C D E amp F while operating them Don t use F too much to be at safe side But I feel that HDD is very slow overall and and every time I turn this system on I get quot -SMART Hard Drive detects imminent failure Attribute failed quot Wondering if it could be fixed or not and I know and understand that my hard disk was failing ever since and most of you guys will advice to back up and purchase a new one but I am still on to fix this one and as if there s any way to get it right up Many Thanks nbsp

A:HDD error "1720-SMART hard drive detects imminent failure attribute failed: #83" ... failing?

The fundamentals still apply:

for every partition ?X?
chkdsk ?X? /f /r​
The /R will remap bad sectors in an effort to avoid future I/o errors.

a} fix all partitions
b} get the SMART data and save it for reverence (it will not be reset to zero by chkdsk)
c} view the SMART data every day
d} look for increasing statistics

PLAN on getting a new HDD asap
 

http://www.techspot.com/community/topics/hdd-error-1720-smart-hard-drive-detects-imminent-failure-attribute-failed-83-failing.190152/
Relevancy 23.22%

Hi Fellows I have TOSHIBA GB HDD I made it external delayed showing External to 0MD size failed due errors write HDD HDD through a drive case and using it since few months for storing the data it has partitions Now External HDD showing 0MD size due to delayed write failed errors I have a problem with it A week before the drive started giving following errors when I was plugging it in to the system There might be a problem with some files on this device or disc this can happen if you remove the device or disc before all files have been written to it Delayed Write Failed I O Device Error Initially it was only reading two partitions after - days it only showed one partition not all data then now it is showing partition with zero data with zero mb total disk space It is asking to format each partition I am trying to open I tried to access the HDD from multiple systems XP VISTA SEVEN but same MB size showing up now every time How can I get the external HDD back to normal state without losing the data already there please help Thanks nbsp

A:External HDD showing 0MD size due to delayed write failed errors

http://windows.microsoft.com/en-US/windows7/Check-a-drive-for-errors
Check the drives for errors as instructed in the link above^. This may take a few hours depending on the size of the drive. If this fails then we will resort to other options. After doing some research, it seems as if this error occurs a lot in XP.
 

http://www.techspot.com/community/topics/external-hdd-showing-0md-size-due-to-delayed-write-failed-errors.189965/
Relevancy 22.79%

I have been driving myself crazy with this issue My main computer out of quot quot cannot bring up the Home Group password to view or leave it nor change the password I have been researching this problem for about a month and know one seems to know how to go about fixing it I tried Microsoft Fix-it with no success and it keeps sending me back to the fix-it download page So I m bring this problem to you guys Now the Peer Networking Grouping controls the features in home group that allow you to see the other systems on your network and also depends on two other services to start the problem is is that I can t and windows can t seem to start them all at the same time or however they are suppose to start it seems to be a catch situation one can t start with out the other and vice-versa Is there anyone who has ever heard of this and tell me how Peer service restarting Networking not Grouping to repair this issue all help would be completely appreciated Page of Windows Peer Networking Grouping service not restarting Network Diagnostics Issues Peer Networking Grouping service not restarting found Either the Peer Name Resolution Protocol service PNRPsvc Enable the services needed for Peer-to-Peer Grouping Not fixed Failed Issues found Either the Peer Name Resolution Protocol service Not fixed PNRPsvc or the Peer Networking Identity Manager service p pimsvc is not running The Peer Networking Grouping service p psvc depends on both these services in order to function properly Enable the services needed for Peer-to-Peer Grouping Failed Network Diagnostics Log File Name ABE - A - A- BED- F Repair Admin etl Detection details Network Diagnostics Log File Name ABE - A - A- BED- F Diagnose Admin etl Other Networking Configuration and Logs File Name NetworkConfiquration cab Collection information Computer Name Windows Version Architecture Time PAULWADE-PC x Wednesday May AM Publisher details Windows Network Diagnostics Detects problems with network connectivity Package Version Publisher Microsoft Windows file IIIC lUserslPaul Wade AppDataiLocallElevatedDiagnostics This is the results from Microsoft Fix-it My Specs are MSI-MS- AMD Athlon X Dual Core Processor GHz Gb Kingston HyperX DDR- ram a GB TB HHD Galaxy GeForce GT DDR MB video card Corsair TX PSU nbsp

A:Peer Networking Grouping service not restarting

So I did some more research and found out to repair Peer Networking Grouping svc and how to also restart my HomeGroup that I also had problems with!
 

http://www.techspot.com/community/topics/peer-networking-grouping-service-not-restarting.181081/
Relevancy 23.22%

My computer wiz of a brother moved across country! Im not a computer wiz but can follow instructions well! IF anyone would like to guide me in the right direction I would appreciate it! thank you!

He can get wireless signal, and at times access the internet for a few minutes, then he is booted again! My brother suggested we install Chrome for him, did so last night! Now I receive messages server cant be found, bc the DNS lookup failed!
 

A:Trouble getting father's computer online wirelessly! DNS look up failed!

It's not a browser issue - - it's the TCP settings

get a command prompt (btw which version of windows?)

enter IPCONFIG /ALL >myTCP.txt

on your follow-up, attach the file myTCP.txt
 

http://www.techspot.com/community/topics/trouble-getting-fathers-computer-online-wirelessly-dns-look-up-failed.189000/
Relevancy 20.21%

My 1TB Western Digital external drive has failed. It's out of warranty so that's not an option. After much internet research and trying many "fixes" that didn't work, I moved on to getting it out of its enclosure. But I need help on what I do next to determine if its the USB port that failed or the drive itself. This is my main backup of all my data (I know my fault for not having a backup of my backup) so I really need to get the data off of it if possible. The sticker on the drive says: SATA / 32MB Cache. My only computer is an HP Pavilion laptop. I am a novice in terms of computer hardware but can follow directions and do "techy" things pretty well. Your help is greatly appreciated.
 

http://www.techspot.com/community/topics/failed-wd-external-drive-is-it-the-drive-or-the-usb-port.188620/
Relevancy 24.51%

Hello I recently purchased a new laptop a Dell Model N Windows home premium It s been about a week that DNS lookup failed I have been attempting to access the web I have successfully set up the wireless network I just added the existing network I have set up through my old laptop My task bar shows that I am connected to the internet using DNS lookup failed google chrome I receive the error message quot the DNS lookup failed quot And while using internet explorer I get quot The DNS server isn t responding quot All of my Wireless Network Connection Properties are set to obtain automatically I ve even tried disabling the IPV I know all these settings are correct because my old laptop is still connected and I am having no difficulty connecting to the internet I consider myself to be fairly computer savvy and this has left me puzzled and extremely frustrated Any help would be greatly appreciated This might be helpful- results from ipconfig from Dell not connecting to internet Windows IP Configuration Host Name Daisha-PC Primary Dns Suffix Node Type Hybrid IP Routing Enabled No WINS Proxy Enabled No Wireless LAN adapter Wireless Network Connection Connection-specific DNS Suffix Description Dell Wireless b g n Physical Address - - -F - - DHCP Enabled Yes Autoconfiguration Enabled Yes IPv Address Preferred Subnet Mask Lease Obtained Sunday October PM Lease Expires Sunday October PM Default Gateway DHCP Server DNS Servers NetBIOS over Tcpip Enabled Ethernet adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description Realtek PCIe FE Family Controller Physical Address -B -FD- A- - DHCP Enabled Yes Autoconfiguration Enabled Yes Ethernet adapter Bluetooth Network Connection Media State Media disconnected Connection-specific DNS Suffix Description Bluetooth Device Personal Area Network Physical Address - - -F - - DHCP Enabled Yes Autoconfiguration Enabled Yes Tunnel adapter TO Adapter Media State Media disconnected Connection-specific DNS Suffix Description Microsoft to Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter isatap - E- - FC-B BF Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter isatap FAF A- DA - CAA- -D DEA B D Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter Teredo Tunneling Pseudo-Interface Connection-specific DNS Suffix Description Teredo Tunneling Pseudo-Interface Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes IPv Address e c ebe f fff Preferred Link-local IPv Address fe c ebe f fff Preferred Default Gateway NetBIOS over Tcpip Disabled Data from Dell computer that will connect Windows IP Configuration Host Name Daisha-PC Primary Dns Suffix Node Type Hybrid IP Routing Enabled No WINS Proxy Enabled No Wireless LAN adapter Wireless Network Connection Connection-specific DNS Suffix Description Dell Wireless b g n Physical Address - - -F - - DHCP Enabled Yes Autoconfiguration Enabled Yes IPv Address Preferred Subnet Mask Lease Obtained Sunday October PM Lease Expires Sunday October PM Default Gateway DHCP Server DNS Servers NetBIOS over Tcpip Enabled Ethernet adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description Realtek PCIe FE Family Controller Physical Address -B -FD- A- - DHCP Enabled Yes Autoconfiguration Enabled Yes Ethernet adapter Bluetooth Network Connection Media State Media disconnected Connection-specific DNS Suffix Description Bluetooth Device Personal Area Network Physical Address - - -F - - DHCP Enabled Yes Autoconfiguration Enabled Yes Tunnel adapter TO Adapter Media State Media disconnected Connection-specific DNS Suffix Description Microsoft to Adapter Physica... Read more

A:DNS lookup failed

Is this WiFi to your own router, or some public hotspot?
These look really good:

Code:

Host Name . . . . . . . . . . . . : Daisha-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : [B]Hybrid[/B]
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Wireless LAN adapter Wireless Network Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Dell Wireless 1701 802.11b/g/n
Physical Address. . . . . . . . . : 64-27-37-F2-85-05
DHCP Enabled. . . . . . . . . . . : [B]Yes[/B]
Autoconfiguration Enabled . . . . : Yes
[COLOR=#ff0000]IPv4 Address.[/COLOR] . . . . . . . . . . : [B]192.168.0.12(Preferred)[/B]
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : Sunday, October 14, 2012 3:23:34 PM
Lease Expires . . . . . . . . . . : Sunday, October 14, 2012 5:42:06 PM
Default Gateway . . . . . . . . . : 192.168.0.1
DHCP Server . . . . . . . . . . . : 192.168.0.1
[B]DNS Servers . . . . . . . . . . . : 8.8.8.8[/B]
[B]8.8.4.4[/B]
[B]NetBIOS over Tcpip. . . . . . . . : Enabled[/B]
In Services, ensure DNS Client is Autostart and running.


These are the test you can run; get a command prompt, then
verify NIC is active ping 127.0.0.1
get your IPv4 Address and then ping it
run tracert 8.8.8.8

first line will be your router/gateway
second will be your ISP
... last should be 8.8.8.8
now test DNS with

nslookup 8.8.8.8
should return google=public-dns-a.google.com

 

http://www.techspot.com/community/topics/dns-lookup-failed.186215/
Relevancy 24.51%

Hello,

I've got a problem. I can't seem to get the wireless working on 1 laptop. It used to work, but since I logged into another Wifi it doesn't work anymore.

It keeps giving the DNS lookup failed in Chrome.

I checked the DNS client, it's running. I renewed, released, did netsh resets.

IP and DNS are on automatic.

The only thing I can find it the logs is that the "Gateway" is empty.

EDIT:

On top of that it takes really long to acquire the network address. Then it gives a limited connectivity warning for 2 seconds, and then it says the connection was succesful and that the signal strength is excellent.
 

A:DNS lookup failed

Go to this post scroll to the bottom, find the attachment

Save to your HD, rename by stripping off the .TXT

Now using an admin login, dbl-click that file to make the change - - reboot.
 

http://www.techspot.com/community/topics/dns-lookup-failed.186338/
Relevancy 43.43%

I?ve never had to set the BIOS password, but the kids are growing up and I need to lock access to my PC.

My Bios has two Password Options: Supervisor and User.

The Supervisor password was accepted, and before I attempt to change the BIOS settings, the Supervisor password is asked for.

Then I set the user password.

However, when I boot up the PC, I am not asked for any password and windows loads as usual.

What am I missing?

The BIOS is Award Software International, Inc. F4 HI 07/03/2007
 

A:Unable to set BIOS user password

Do you have the option mentioned below?

Setting a BIOS Password




...
Now you'll want to set your system to ask for that password every time it boots, so select the BIOS FEATURES SETUP option, to see a menu something like this:

Fairly obviously, it's the Password Check option we're interested in, so select it and change the setting to ALWAYS.

etc....Click to expand...


 

http://www.techspot.com/community/topics/unable-to-set-bios-user-password.183774/
Relevancy 20.64%

Hello all,
I hope someone can help me. When I turn on my ACER Aspire 5733 laptop, after putting in my password the screen turns white and the above message comes up and stays up not letting me do anything, even the curser doesnt move. It also says, What you can try, but gives me no options. I can turn off the laptop but when I try to use again the same thing happens. I have Windows 7 and am using Firefox.
Thanks for your help.
 

A:Message: Navigation to the webpage was canceled

Have you tried ,Booting into safe mode . If not try that and run a good spyware program. Such as Superantispyware or Malware antibites. Plus run your anti virus program. Sound like you might have a virus or some nasty spyware. If this is the case you might want to post in the Virus and Malware Thread. Some over their will help you.
 

http://www.techspot.com/community/topics/message-navigation-to-the-webpage-was-canceled.182612/
Relevancy 20.21%

So for many weeks, I had the blue screen startup loop problem. I finally managed to log in Somehow and reformatted my computer. Now I am receiving a hard drive failing message, and the internet says I should download crystal disk. I did so, and this is what it says



Would be grateful is someone could tell me how to solve this, or if I have to replace it =/
 

A:Windows 7 hard drive fail message

You'll have to replace it.
 

http://www.techspot.com/community/topics/windows-7-hard-drive-fail-message.182416/
Relevancy 23.65%

My fan recently broke. So I simply jus popped another one on. The fan I replaced it with jus has red and black which is obv live and neg but the one I took out has red black and yellow any idea about the yellow ? The fan works great but CPU fan failed error keeps appearing then when I press F11 it says entering setup but still shuts down.any ideas about how to keep it running just to get into the settings and change the CPU fan settings. Would be grateful with any help. Thankyou.
 

A:Help needed to bypass the CPU fan failed error at startup

You bought the wrong type of fan. They aren't all the same. You should have bought a CPU fan but you have a case fan instead. The yellow wire goes to a sensor connection that controls the speed of the fan. The motherboard detects the missing connection and throws the error you saw. The solution is to buy the correct type of fan.
 

http://www.techspot.com/community/topics/help-needed-to-bypass-the-cpu-fan-failed-error-at-startup.170008/
Relevancy 24.51%

Hello I m Redsuns and I have this Dell Inspiron Laptop I ve been getting the quot DNS lookup failed quot error message constantly while using Google Chrome Sometimes when refresh the webpage of Facebook or go to google homepage this problem always happen What method shall I use to DNS failed lookup solve it Any DNS lookup failed suggestions would be appreciated Thanks in advance Host DNS lookup failed Name Dell-PC Primary Dns Suffix Node Type Hybrid IP Routing Enabled No WINS Proxy Enabled No DNS Suffix Search List Home Wireless LAN adapter Wireless Network Connection Media State Media disconnected Connection-specific DNS Suffix Description Microsoft Virtual WiFi Miniport Adapter Physical Address -F -A - E- - C DHCP Enabled Yes Autoconfiguration Enabled Yes Ethernet adapter Bluetooth Network Connection Media State Media disconnected Connection-specific DNS Suffix Description Bluetooth Device Personal Area Network Physical Address - - - D- - D DHCP Enabled Yes Autoconfiguration Enabled Yes Wireless LAN adapter Wireless Network Connection Connection-specific DNS Suffix Home Description Dell Wireless WLAN Mini-Card Physical Address -F -A - E- - C DHCP Enabled Yes Autoconfiguration Enabled Yes Link-local IPv Address fe b bc Preferred IPv Address Preferred Subnet Mask Lease Obtained Lease Expires Default Gateway DHCP Server DHCPv IAID DHCPv Client DUID - - - - - F-DB- -A -BA-DB-AA-F - DNS Servers NetBIOS over Tcpip Enabled Ethernet adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description Realtek PCIe FE Family Controller Physical Address A -BA-DB-AA-F - DHCP Enabled Yes Autoconfiguration Enabled Yes Tunnel adapter isatap CDD B - BA - -B -C A FD Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description Microsoft to Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter isatap BF ED - - - -B BFDA Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter isatap - - -BFDD- BFD AA BC Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter Teredo Tunneling Pseudo-Interface Media State Media disconnected Connection-specific DNS Suffix Description Teredo Tunneling Pseudo-Interface Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter isatap A EC- C E- - FE - FC D A Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes nbsp

A:DNS lookup failed

Do you know how to access your router to configure it? If you do, I would try adding 8.8.8.8 as a secondary DNS server in the DHCP settings. Let me know if you need help with this.
 

http://www.techspot.com/community/topics/dns-lookup-failed.181576/
Relevancy 35.26%

I was running Win XP which finally failed and I was able to enter in safe mode (only, no networking) and ran all the tests I could think of. Hard drive is ok and so I attempted to repair WinXP from the installation CD. However, the PC failed to shut down and restart so I eventually force closed it. Now it won't even load past the initial black windows screen, don't even get the option of going into safe mode.

Is there any way I (or someone) could access the hard drive to retrieve the data? I guess I could reinstall the OS but don't want to do that yet as I'll definitely lose the data.

Any advice would be appreciated.

Thanks.
 

A:Win XP failed, repair failed -- can I access hard drive?

Sure, there are many ways. Depending on what you want in the end decides how to proceed.

If you have a lot of space free on the drive, you could boot off a linux dvd and create a new partition. You'd have to shrink the existing, then make a new one. Then you could just copy over the data from the old one to the new one. Then reinstall windows onto the old partition, and copy your stuff back (then delete the partition and expand the remaining to fill the rest of the space).

You can also just boot off a linux disk and copy it to a thumb drive or whatever.

Or you could remove the hard drive and place it in another computer.

Also, I'm not convinced you lose the data if you install Windows again. I'm pretty sure you can install without formatting the drive. Your programs won't work, but it shouldn't overwrite any of your data. This is a non-ideal solution though.
 

http://www.techspot.com/community/topics/win-xp-failed-repair-failed-can-i-access-hard-drive.179446/
Relevancy 22.36%

I sent my laptop in to be serviced under warranty because the keyboard would not work. was denied service because of water damage but now my screen doesn't work, can someone help
 

A:My screen won't turn on after service was denied on warranty due to water damage

Water can destroy a laptop or any other electronic device. Chances are that the water sat underneath the keyboard and flowed onto the motherboard where it dried causing corrosion and damaging the motherboard permanently. You could take the laptop to a repair shop and they could give you a repair estimate. Of course, you will have to pay for this repair. If a liquid is spilled on a laptop in the future, immediately open it and turn it upside down. This allows the liquid not to hit and pool on the motherboard, or in a keyboard
 

http://www.techspot.com/community/topics/my-screen-wont-turn-on-after-service-was-denied-on-warranty-due-to-water-damage.178774/
Relevancy 32.68%

I hope i put this in the right section:

Something this good might not even exist but im looking for the cheapest and most fully featured unlimited storage service that will work cross platform with Windows and Linux (and even iOS as a bonus). The search has been a little overwhelming as there are so many services and all these little nuances of details.

The reason I want a large amount of space is that my friend just accidentally killed two of my external hard drives with a faulty power adapter, and I want something that will keep my files safe from harm. I have quite a bit to upload (few hundred gigs) so the more the merrier. I'm also tight on money which is why it's paramount that I find something cheap.

Thanks for the help fellas
 

A:Looking for cheap, feature loaded unlimited storage

Several accounts with those who offer 150GB but most are 11GB like Minus then 2GB with dropbox or it could be 10GB. Cloud base is not cheap and going to cost.
 

http://www.techspot.com/community/topics/looking-for-cheap-feature-loaded-unlimited-storage.176891/
Relevancy 20.21%

Hello, it is the first message I have gotten along with messages that say that failure is imminent. I am backing up the computer, but I need advice on how to fix it and it it is possible that the error will just "go away"

Thank you in advance!
 

A:First error message HM641JI on Sony VAIO

I thought I might give more info...it's a Sony vaio f series and the error is with the Samsung hm641ij and I haven't switched in the computer since lat night.i am using my phone. Thank you again for any help
 

http://www.techspot.com/community/topics/first-error-message-hm641ji-on-sony-vaio.176299/
Relevancy 23.22%

To start I left my laptop off for two days while away on vacation I return home and attempt to load it and receive the windows error message quot Windows failed to start A recent hardware or software change might be the cause quot I am left with options to boot start windows boot manager to load windows normally When I try option at the bottom of screen there s a bar that says loading windows file and then the screen goes to a black screen with an arrow never to load--even after a substantial amount of time hours When I try option it goes to the windows logo screen for a couple of minutes and then returns to the error message screen I have a Toshiba Satellite L -S Windows bit My year warranty on the laptop just ended less than a month ago and when contacting Toshiba they note this Upon a minute conversation I was told that the harddrive crashed and needs to be replaced as well as windows OS I just don t understand what could have happened because prior to leaving for vacation L655 start failed Windows Toshiba Satellite to - windows was functioning no problem My laptop is not making any weird sounds I just want to be sure their solution is necessary or is there any other solutions I could try before dishing out for this computer Also know any strategies getting around out of date warranty when right outside within weeks of the warranty period nbsp

A:Windows failed to start - Toshiba Satellite L655

I don't know if you got this settled, but it sounds like the hard drive might be okay if you can re-format and re-load Windows fresh
 

http://www.techspot.com/community/topics/windows-failed-to-start-toshiba-satellite-l655.175786/
Relevancy 43.43%

Hey guys every time i restart my laptop it wipes all the user profiles, leaves one and wipes all the custom settings on that profile. I have no idea and any help would be greatly appreciated

Thanks again
 

A:User profiles deleted on start up

This might be caused by a virus or other malware infection, a corrupt hard drive or Windows itself is corrupt... Can you do a destructive laptop restore? This is a way that the laptop is put back just like it was when you turned it on when you first bought it
 

http://www.techspot.com/community/topics/user-profiles-deleted-on-start-up.175534/
Relevancy 21.07%

I just tried to get into my ISY99 which is a lighting control hrough my dyndns account. I got a 403 forbidden message. I have never seen this before and don't know how to fix it. Anyone care to help? Thanks.
 

A:403 forbidden message

Which browser did you try? Try IE or Chrome or Firefox.
 

http://www.techspot.com/community/topics/403-forbidden-message.173765/
Relevancy 20.21%

Hi - I have a yellow warning indicator in my Devices and Printers folder next to my PC. The error message is:

Name - Texas Instruments 1394 OHCI Compliant Host Controller
Device Type - IEEE 1394 Bu host controllers
Device Status - This device cannot start (Code 10)

I am not exactly sure what this is affecting but I am unable to print for one, despite uninstalling and reinstalling the print drivers.

Anyone seen this type of issue before?
 

A:TI compliance host controller error message

What is the make and model of your printer. What type connection does it have? USB, Firewire or wireless?
 

http://www.techspot.com/community/topics/ti-compliance-host-controller-error-message.172675/
Relevancy 20.64%

This is the message I keep getting on boot up. I was messing around in the bios before I was getting this message. I managed to reinstall Windows 7 and it is working fine. The hard drive is Sata. I may have plugged it into another sata port on the board. Anyone have a clue how I can fix this?

Serial ATA AHCI BIOS, version UPSD Source 08-24-2007
Copyright (c0 2003-2007 Intel Corporation
** This version supports only Hard Disk and CDROM drives**
Please wait. This will take few seconds.

Controller Bus#0 Device#1F, Function#2: 06 ports, 01 Devices
Port-01: No Device Connected
Port-02: No Device Connected
Port-03: No Device Connected
Port-04: No Device Connected
Port-05: No Device Connected
AHCI BIOS not installed
 

A:Getting AHCI BIOS not installed message

go into your bios and turn off AHCI mode
 

http://www.techspot.com/community/topics/getting-ahci-bios-not-installed-message.173476/
Relevancy 23.65%

I attempted to promote a member server to be a BDC in a single server domain It seemed to complete successfully but later I found that it did not I now have multiple issues with the server I see the following in Event Viewer In the system log I am receiving SAM errors In the Directory Service log I am receiving NTDS Replication errors that full synchronization did not occur In the DNS Server log I am receiving Event id stating that the DNS BDC Issues a a had server failed 2000 DCPromo that with server is unable to open the Active Directory In File Replication I am receiving a error Apparently the SYSVOL cannot be created I do see that the user database did come over from the PDC however I am also receiving messages that I cannot create new Issues with a 2000 server BDC that had a failed DCPromo user objects until the BDC can sync with the PDC I am researching all this stuff but not really knowing where to begin I have tried to DEMOTE the failing BDC but since it cannot attach to the Issues with a 2000 server BDC that had a failed DCPromo DNS server the ip address of the PDC the demotion fails too Any thoughts are GREATLY appreciated Greg nbsp

A:Issues with a 2000 server BDC that had a failed DCPromo

Maybe this will help:
http://support.microsoft.com/kb/837932
 

http://www.techspot.com/community/topics/issues-with-a-2000-server-bdc-that-had-a-failed-dcpromo.172227/
Relevancy 43.86%

In our network we have many remote sites. We are currently all WinXP Pro but are starting to transition to Windows 7 (64-bit) when we cycle PCs out.

We have been using RealVNC for years instead of RDP because RealVNC allows shared control of the PC between you and the local user (ie: "Show me what you are talking about"). I've tried Tight (which leaves lots remnants after uninstalling), Real (simply does not work unless you buy the Enterprise version, for ~800 computers that just isn't going to work) and Ultra (works, but randomly resets its options and closes down once you log out of a profile).

Is there a way to allow shared control during RDP? If not, is there another VNC-ish program I can try (freeware) that's as reliable as RealVNC has been under XP?
 

http://www.techspot.com/community/topics/allow-local-user-control-in-rdp.171996/
Relevancy 24.08%

Hi I use Windows DNS lookup failed, continuously -bit as my OS I just moved into DNS lookup failed, continuously a new apartment got the internet installed and was using it for days or so Suddenly it was taking much longer to load sites then it would just show a quot dns lookup failed etc quot message This happens regardless of browser used chrome opera firefox IE Strange thing is that the internet connection is still very strong and my service is mb s so I still download torrents at speeds of mb s It just can t seem to manage more than one thing For instance while downloading a torrent even at speeds of just kb DNS lookup failed, continuously s if i try to check out websites the DNS message will usually show up again by the nd opened page It s pretty much like this all the time though I ve used Hijack this malwarebytes and avg free version to get rid of whatever malicious thing might DNS lookup failed, continuously be in my comp but no success so far Any suggestions would be great BTW I m a completely newb so explicit instructions would be greatly appreciated nbsp

A:DNS lookup failed, continuously

get a command prompt window (start->run->cmd)
enter IPCONFIG /ALL >myTcp.txt

open the myTcp.txt file, copy all the data <ctl>c
and follow-up to this thread, pasting the data.

PLEASE describe your Internet setup

ISP name?
connection type? {dial-up, DSL, Cable, Satellite}

Brand name and model of your modem? _____ your router _____?

Are you using a wired or wifi connection?
 

http://www.techspot.com/community/topics/dns-lookup-failed-continuously.170666/
Relevancy 44.29%

Hello everybody, I have a home network with about 3 computer connected. I am using a laptop and when ever I use the net view command in cmd, I can only view my laptop. Why can't I see the other 2 computer?

All the computer have Win. 7 Home Premium Installed. Is there a way to send messages to those computers within the network, without the use of 3rd party applications... Perhaps by cmd?

I know you can, but I am unsure how.
 

A:Net view/net user

examples

Code:
C:\Documents and Settings\Jeff>net view $SYSTEM_NAME
Shared resources at $SYSTEM_NAME
[B]lt-beard[/B]

Share name Type Used as Comment
--------------------------------------------------------
Italy-1 Disk
Italy-2 Disk
RealEstate Disk
SharedDocs Disk
The command completed successfully.

C:\Documents and Settings\Jeff>net view emac
Shared resources at emac

Mac OS X

Share name Type Used as Comment
--------------------------------------------------------
homes Disk User Home Directories
i860 Print Canon i860
jeff Disk User Home Directories
MP470 series Print Canon MP470 series
The command completed successfully.
It should be clear that NET VIEW SYSTEM is dependent upon getting Print/File Sharing working correctly.


Code:
C:\Documents and Settings\Jeff>[B]net user jeff[/B]
User name Jeff
Full Name Jeff
Comment primary user(LUA)
User's comment
Country code 000 (System Default)
Account active Yes
Account expires Never

blah blah ...

Workstations allowed All
Logon script
User profile
Home directory
Last logon 9/2/2011 10:55 AM

Logon hours allowed All

Local Group Memberships *Users
Global Group memberships *None
The command completed successfully.

Would appear to be Policy settings for the user
 

http://www.techspot.com/community/topics/net-view-net-user.170621/
Relevancy 39.13%

My m-in-l s computer crashed so I brought it message ATI everyone! Control to Panel Error Hello "The initialize..." failed to my house to reinstall everything for her I am almost to the point of setting it back up at her house but I am still having a couple of problems Hello everyone! Error message "The ATI Control Panel failed to initialize..." I ve searched and searched for all three but nothing has worked yet so I thought I Hello everyone! Error message "The ATI Control Panel failed to initialize..." would post on here I noticed a yellow circle with a quot quot in the middle of the yellow circle under device manager of her Display adapters Video Controller VGA Compatible quot In the system tray it says quot Found New Hardware ATI Radeon Xpress Series quot So I went to Gateway website to get the specific drivers for my M-in-law s GT e Os XP and their was a chip driver for the ATI Radeon Xpress Series so I downloaded it amp extracted the files into Cabs like the instructions said to and now I am getting the error message quot Severe - Setup was unable Hello everyone! Error message "The ATI Control Panel failed to initialize..." to complete the installation Try to set up your display adapter with a standard VGA driver before running setup quot So I closed that window and a new window popped up saying quot The ATI Control Panel failed to initialize because no ATI driver is installed or ATI driver is not working properly The ATI Control Panel will now exit quot Any suggestions would be appreciated to how amp where do I fix this nbsp

A:Hello everyone! Error message "The ATI Control Panel failed to initialize..."

Hello and welcome to TechSpot.

The subforum you posted in is for new member introductions only, so I have moved your thread to the relevant forum so others can best assist you.
 

http://www.techspot.com/community/topics/hello-everyone-error-message-the-ati-control-panel-failed-to-initialize.170409/
Relevancy 95.03%

Okay here is the story My laptop has a ton of valuable information on it recently my Norton protection ran out and was unable to renew it Well somebody hacked my system and now I have a ton of viruses trojans and malware So I was still able to use my Copy to drive external profile user entire hard PC for internet usage and my music still played in Windows Media Player So all in all my laptop still worked Now today I go to turn on my laptop and it will not boot up at all I can t even system restore or repair it with windows repair However I do need to back up my files and since my hard drive is what is wrong in the first place I think it might be better instead of copying the entire hard drive to my terabyte external hard drive if it would make more sense just to copy my entire user profile onto my external I am wondering if this is possible i have heard of LiveCD s and Parted Magic from this forum But I am wondering if I can just back up all of my files that way If I can back up all of my files like that I might save money instead of taking to a repairman and just fix it myself So is it possible to copy and back-up the entire user profile of a laptop that will not boot up to an external hard drive Basically I want to copy the entire contents of my User Profile on Vista onto an external drive so I can use my reboot CD to reboot my laptop without losing any of my files and folders or Copy entire user profile to external hard drive anything for that Copy entire user profile to external hard drive matter I figure the best way to do that would be to copy the user profile so all the contents of that profile would go onto my external Then I reboot my computer and put Copy entire user profile to external hard drive the User Profile back on Simple nbsp

A:Copy entire user profile to external hard drive

Have you tried a repair install? If that is possible that will leave your files intact.. It is a good idea to back on a regular basis anyway.

The other possibility is connecting your hard drive as a slave drive on another pc.

If the repair install is not possible there are a number of ways using boot cd's to access your data.

Here is one solution that is free and should do what you want
http://www.paragon-software.com/home/rk-express/
 

http://www.techspot.com/community/topics/copy-entire-user-profile-to-external-hard-drive.169549/
Relevancy 20.64%

I am getting an error message saying "The file or directory is corrupted and unreadable." I have run CHKDSK /r to try and repair any errors on the drive; cmd showed a report stating chkdsk has finished. But when I try to access the drive I still receive the same error report. Is there anything anyone out there can suggest that could help me with this problem?! Thank you so much in advance for you help!
 

A:Maxtor One Touch 4 error message!

chkdsk drive name: /f /r

Segate now owns Maxtor you can check their site for some Tools to use. But you might have a faulty HDD. Try that set of commands listed above.
 

http://www.techspot.com/community/topics/maxtor-one-touch-4-error-message.168131/
Relevancy 22.79%

my internet connection keeps going off and I have phoned my service provider to trouble shoot but it keeps on happening intermittantly. I have restarted my computer and then it goes back online.
 

A:My internet connection keeps going off and I have phoned my service provider

We need a bit more information.

Is it wireless or do you connect with a cable to your router.

What version of windows are you using.

Is this a laptop or desktop with a built in wireless card or are you using a dongle.

Please provide the make and model of the PC.

Apart from that you have started this thread in the section for introducing yourself, it should be in Storage and Networking.

You may get moved but help will continue.
 

http://www.techspot.com/community/topics/my-internet-connection-keeps-going-off-and-i-have-phoned-my-service-provider.166632/
Relevancy 22.79%

Hi.. I need to know the authorized service centers for Corsair Memory in India(Mainly in Coimbatore/Chennai).
 

A:Corsair Service Centre locations in India?

If this is to return a faulty product under warranty, go to here: http://www.corsair.com/support/technicalsupport

Fill it out, and they will be in touch with where to send your product for repair.
 

http://www.techspot.com/community/topics/corsair-service-centre-locations-in-india.165122/
Relevancy 44.72%

Hi fellow service unknown status start failed or the Connection to dependency group computer junkies I can see a multitude of difficulties have been overcome by your group effort I hope you ve got another fix up your sleeves My laptop is years old HP COMPAQ C Notebook PC Vista Home Premium purchased with Intel Pentium Dual CPU T Ghz GB RAM bit OS My internet connection is normally T-Mobile USB Internet card Also connect WiFi with built in card Local Disk C NTFS GB Free GB Presario RP Disk D GB Free GB Pc tools spyware doctor w Antivirus Malwarebytes The first indication of a problem began with announcement that new Connection status unknown the dependency service or group failed to start hardware had been found Knowing that I had installed nothing I blocked the new hardware attempt to connect Next day I found I could not reach the internet using T-mobile Among other things Windows Defender and Firewall were not operating I got a message quot Failed to connect to a windows service Windows could not connect to System Event Connection status unknown the dependency service or group failed to start Notification Service This problem prevents limited users from logon on to the system As an administrator user you can review the system Event Log for details about why the service didn t respond quot Of course upon investigating I found I could not open Event Notification log Normally at a time like this I would reach for System Restore But I was informed no restore points were available With help from Brother-in-law Larry and using desktop with the T-mobile connection I was able to get online to find the fix to the problem I started in Safe Mode Clicked start search cmd right click ran as administrator typed quot netsh winsock reset quot enter and restarted Also ran sfc scannow That got rid of that problem Was then able to see Event Notification log But now new error quot Connection status unknown The dependency group failed to start quot I right clicked on that message got option to Diagnose and Repair Got message Network Diagnostics cannot run because Diagnostics Policy service is not running Clicked to open Service Control Manager SCM is in Management Console This opened Local Services which shows full pages of application descriptions status startup type and log on as I found Diagnostic Policy Service Properties set to startup automatic but service status is stopped I clicked start result was Error Access is denied Many other items are in same state When start attempted on some other applications Error was received also Some applications gave Error quot The dependency service or group failed to start I don t know if this is important but After being allowed to view Event Notification Log I looked at Security log which had as earliest date that was days ago Today the earliest date is I noticed several entries throughout from oldest to newest dates the entries were quot Special Logon quot with Special Privileges assigned to new logon On the oldest one it seemed to be given privileges which included among others I can t remember assign Primary token privilege Security Privilege Audit Privilege take ownership privilege TCB privilege load driver privilege backup privilege restore privilege debug privilege system environment privilege and Impersonate Privilege That s it for now bout all I know Send help please Bill Ellison nbsp

A:Connection status unknown the dependency service or group failed to start

Shot in the Dark

Have you tried running MalwareBytes in safe mode? Do you have an antivirus on your computer? Sometimes Virus' know MBAM so you may want to change the name of the program before you run it.

My Computer Lady
 

http://www.techspot.com/community/topics/connection-status-unknown-the-dependency-service-or-group-failed-to-start.164058/
Relevancy 43.86%

Hello,

I have a lynksis wrt400n wireless router. I noticed today that there is a user named 'scotty-PC' in my network.

I do have it password protected.

I'm thinking the easiest way would be to shut off the wireless if that is possible. My wife and I are both hardwired into the router anyways.

How do I go about shutting off the wireless signal from the router?

Thank you in advance!
 

A:Need help with unknown user in my network

use your browser to reconfig the router - - use the IP address 193.168.1.1 as a URL
login: leave user name empty, password is admin
(obviously this needs to be changed too - - read on)

the Users Guide is here

Option one would be to DISABLE the radio - - read thru to find that

Option two would be to use WiFi Mac Filtering; -- pg 14
This option will allows ONLY defined systems access, so set a dummy, like the MAC
address of your wired NIC

Before you quit, DISABLE remote management on port 8080
and CHANGE that admin password
 

http://www.techspot.com/community/topics/need-help-with-unknown-user-in-my-network.164009/
Relevancy 53.75%

I have a Dell Dimension 2400 with 2gb ram and Pentium 4 2.80 GhZ. I'm ready buy the Radeon HD 5450 PCI only LP for 94.99. Will this card work for the new games and will it work for Dell Dimension 2400?

Please don't say go buy a gaming computer or buy a gaming console. I don't have money and I need to earn money for better housing. I am buying this card for my son's birthday.

PS: Since I'm new and I can't post the link. It's on NewEgg.
 

A:Will the Radeon HD 5450 Low Profile PCI only work good on new games?

There would be no problem with the card playing new/old games, given appropriate graphics settings, but I'd be much much more worried about the processor.
You'll want to check with someone else but I would suspect that the powersupply won't be enough either.
 

http://www.techspot.com/community/topics/will-the-radeon-hd-5450-low-profile-pci-only-work-good-on-new-games.163269/
Relevancy 17.63%

I have a WD quot Caviar Black quot GB installed in a Gigabyte H board as a quot volume quot Path quot G quot The drive is running under Windows in quot ACHI quot mode The drive is not being detected Available" Windows Not "Drive message: upon resume Windows message: "Drive Not Available" from S- possibly from boot also All that is necessary is to remove and replace the SATA connector cable and the drive responds hot plug The problem manifested itself once earlier and I replaced the SATA cable the drive then became operative and I thought the problem was resolved Apparently this is not so I m thinking that the drive is defective since I have no trouble with the system drive Seagate GB Barracuda SATA But since comparing the Windows drive with a volume drive might be an apples to oranges issue second opinions would be welcomed Edit I suppose that it also might be a bad SATA controller so which is more likely Edit Now I can t make it do it nbsp

A:Windows message: "Drive Not Available"

Are you running the latest BIOS and chipset drivers ?
I know Gigabyte boards do (or have had) various S3 resume issues- non detection of SATA optical drives (H55M-USB3 heading, first paragraph) as well as the continuous boot cycle issue that plagued P43/P45 boards.
 

http://www.techspot.com/community/topics/windows-message-drive-not-available.150892/
Relevancy 23.22%

please help me, i'm from vietnam, so my english so bad, i'm very need dell service tag utilities version 5.1, please send for me, thank you very much, i need for my job, if not my boss fired me, thanks again for read here
 

A:Need Dell Service Tag Utilities version 5.1

Call Dell support.
I think you will find that the utility is available ONLY to Dell service providers.
 

http://www.techspot.com/community/topics/need-dell-service-tag-utilities-version-5-1.162126/
Relevancy 20.21%

This is the message I get - not sure what it is indicating or what to do about it Thanks ------------ email Not available Problem Description Product Name WD Anywhere Backup Product Version CLRVersion OSVersion Microsoft Windows NT Service Pack Build Version Shutdown False Platform bit Backup Plan Backup Name quot My WD Backup quot Destination E My WD Backup Secure False Provider Type Tanagra HardDisk InstanceID A DED - A- -B A- B E E Exception System Exception Please open log file and search quot Possible database file corruption alert quot for more details about this error and possible fixes --- gt Finisar SQLite SQLiteException unable to open database file at Finisar SQLite sqlite Throw at Finisar SQLite sqlite sqlite vm Dispose at Finisar SQLite SQLiteCommand ExecuteNonQuery at Tanagra DataClad Utility SQLiteFileError DoUpdate SQLiteConnection conn AutoBackupErrorItem item String fileName at Tanagra DataClad Utility SQLiteFileError Add AutoBackupErrorItem item at Tanagra DataClad ProviderInstance ErrorDBAdd Message msg Exception ex at Tanagra DataClad BackupMessageSink DoProcessQueue IMessageQueue queue at Tanagra DataClad BackupMessageSink ProcessQueues --- End of inner starting Passport) (WD Error upon drive external message exception stack trace --- at Tanagra DataClad BackupMessageSink ProcessQueues at System Threading ThreadHelper ThreadStart Context Object state at System Threading ExecutionContext Run ExecutionContext executionContext ContextCallback callback Object state at System Threading Error message upon starting external drive (WD Passport) ThreadHelper ThreadStart App Tanagra DataClad nbsp

http://www.techspot.com/community/topics/error-message-upon-starting-external-drive-wd-passport.162122/
Relevancy 18.06%

Hey Guys,

my motherboard is an ASUS P8H67-M PRO i built my computer a few days ago and haven't really had any major problems but i noticed today when i turn my computer on there is a little message the top left hand corner of the screen i can really make it all out as it is gone in an instant but what i can make out is
"No Devices"

Does anyone know how to fix this? it doesnt make sense as my drives work fine and they are recognised inside the bios. The only issue i have had is i cam to install linux today and i received an error message saying CD/DVD + USB devices not found and i cant help thinking they are linked.

Thanks in advance
 

A:"No Devices" message appears before BIOS loads

Did you install the chipset drivers?

Are there any devices in Device Manager with a yellow ? or triangle next to it.

What version of windows are you running.
 

http://www.techspot.com/community/topics/no-devices-message-appears-before-bios-loads.161876/
Relevancy 23.22%

Hello!
I have Asus M50Sv with Realtek HD Audio and Vista 32bit SP2.

Once a day after rebooting the sound dissapeared because of Windows Audio service not started.
In events log I see Windows Audio service starting error with code 13 (OxD).
If I try to start this service manually - it also fails to stard whth error code 13.

I read all found threads about Audio service problem whth Vista and didn't found a solution.


All services Windows Audio service depends from are running properly.
I have reinstalled audio device using lates version of Realtek audio drivers.
I have updated all other drivers and installed latest Windows updates.
I don't have rollback points.

Can someone give me more ideas how I could be fixed?
(reinstalling windows is not an option so far)

What it means then service fails to start with code 13?

Please help!

Thanks in advance!
 

A:Windows Audio Service not starting

I'm assuming the sound card is integrated? Try reinstalling the driver completely. Uninstall the current one and then reinstall it (or the most current one).
 

http://www.techspot.com/community/topics/windows-audio-service-not-starting.161648/
Relevancy 31.82%

I have a satellite A65-S126. model no. PSA60U-02KO15. the laptop is failing to boot. When l power it up, Iit requires me to pick last known good configuration or us the safe mode options.
I have tried to reinstall the operation system and when the installer tries to copy files to the disk, it gives the following error message, "file ntkrnlmp.exe could not be loaded. the error code is 7. setup cannot continue, press any key to exit"..
l have checked my dvd rom by way of installing it on another similar laptop and it has worked. Have also checked my memory modules and they again proved to be working.
Your assistance on this matter, team, will greatly be appreciated.
 

A:Satellite A65-S126. File ntkrnp.exe could not be loaded. Error code is 7

See this link:
http://www.computer-adviser.com/error-code-7.html
 

http://www.techspot.com/community/topics/satellite-a65-s126-file-ntkrnp-exe-could-not-be-loaded-error-code-is-7.161198/
Relevancy 20.64%

Hi,I have installed a new pci express card i get a message when starting up it says warning make sure the fan is connected and there is good ventilation is this normal as the card fan is working fine.if it is the norm is there away of stopping this message.Regards Martin.
 

http://www.techspot.com/community/topics/pci-express-card-installed-odd-message.160909/
Relevancy 43.43%

I ll try to shorten this some I was having some problems that I determined were either caused by the hard drive corrupted WinXP Media Version or my RAM I ran MEM Test user paste Can't switch copy can't and and it failed so I replaced the RAM with one G Can't switch user can't copy and paste stick That solved several issues I still had an issue with switching users I had the computer set up for users with myself as the admin My partition is that what it s called works just fine but if I log into one of the other three it will not allow shutdown restart log off or change user It forces me to do a hard shutdown I decided that my OS may be corrupted so I took the opportunity to install a bigger faster HD and installed WinXP Pro The problem did not go away This doesn t make sense to me What else could cause this I also have a new problem Sometimes the copy and paste feature will just quit working It seems to copy but then the Paste will not quot light up quot when I right click in the program I want to use Could this be driver related nbsp

A:Can't switch user can't copy and paste

It's possible that the group policy is keeping the regular users from doing things like log off, or shutdown. You may want to check what the settings are or put all those users into a single group and give them the proper permissions to do whatever you want.
 

http://www.techspot.com/community/topics/cant-switch-user-cant-copy-and-paste.159642/
Relevancy 23.65%

Bit of a weird problem i try to send a file to my computer less than about 300kb it transfers fine any larger it fails. I try sending it through MyPhoneExplorer, it transfers all of it but my point is I some times need files from other people not just my own phone. Any ideas? I am on windows 7 home premieum 64 bit i do have a uknown device listed as "bluetooth peripheral device" with that yellow triangle.
 

http://www.techspot.com/community/topics/bluetooth-file-transfer-failed.159627/
Relevancy 24.51%

My Seasonic S12 E+ 650W PSU failed suddenly this morning without warning with smoke sending the UPS into overload mode. After removing the supply and plugging into wall outlet it blew the circuit breaker as soon as I turned it on. It's two years old with a five year warranty.

1. Anyone had this happen?
2. What are the possibilities of damage to devices connected to the output?
3. Anyone dealt with the Seasonic RMA system? What is the turn around time?
 

A:Seasonic PSU failed big

I've never had a PSU bigger than 430 watts, and never had one go up in smoke. Since that's just my individual experience, I can't adequately answer for "anyone". Sorry

There's at least a 50/50 chance of the board or such being damaged, since what you're describing is a catastrophic failure. I'm sure that a big Seasonic PSU has circuit protection in place, just hope it didn't either break, or fail to kick in in time. And we're both aware that you won't know until you substitute another PSU anyway. A rhetorical question maybe?

This is a wild guess, but it would likely take at least a month round trip for an adjustment under warranty. Part of that is dependent on if you're shipping coast to coast, or fifty miles away. That could add, up to six days to the total.
 

http://www.techspot.com/community/topics/seasonic-psu-failed-big.158716/
Relevancy 23.65%

Ok so his power turned off randomly in his house because of some faulty kitchen appliance.

His computer started in safe mode and he thought it was broken so he started messing with services/startup.

Now he has no internet because in the network connections folder it says windows can't display any adapters and he doesn't know what he's done.

His internet in the house is still working because he has access on his blackberry it's just purely the access on his computer.

I'm nowhere near him and I'm on W7 not XP like he is and I can't really fix his problem but I was wondering if anyone had any ideas about what he might have done?

In services I told him to check that Network Connections 'Netman' service was on but don't know what else to say.

Thanks for any help you can provide guys!
 

A:Friend's Internet failed - possible setting in Windows?

Try System Restore to a point before the power problem. If that doesn't help, try uninstalling the old LAN/NIC driver through Add or Remove Programs and installing a fresh new one.
 

http://www.techspot.com/community/topics/friends-internet-failed-possible-setting-in-windows.158972/
Relevancy 33.54%

well, I have a desktop computer that I got from work.

I formatted and it is an re-installed XP service pack 2. Now I cannot see the second harddrive and I also cannot connect to the internet. It looks like the network card is not there but it is an integrated one. I am not too terchnical with this stuff but could use your help. I am re-loading XP again to see if I missed a step,
 

A:Loaded XP, now no Internet

Is the hard drives got the same manufacturer if so you will only see one.

As for the connection to the Internet you may need the drivers for the network card also check in device manager to see everything is working.
 

http://www.techspot.com/community/topics/loaded-xp-now-no-internet.158882/
Relevancy 45.58%

hello my name is kim and i am having major problems trying to play my sims games i keep Failed message getting a failed msg about direct x c blah blah blah so anyway i have jus upgraded to windows which comes with direct x so i am trying to figure out what the problem is i have read all the post on this website regarding the problem and have downloaded and followed every step i possibly can if someone can please help me fix this problem that i have never come across that would be great here is my computer info someSystem Information ------------------ Time of this report Machine name ARICKIM-PC Operating System Windows Ultimate -bit Build win gdr - Language English Regional Setting English System Manufacturer Compaq Presario System Model PC A-ABA SR WM NA BIOS Phoenix - AwardBIOS v PG Processor Intel R Celeron R CPU GHz GHz Memory MB RAM Available OS Memory MB RAM Page File MB used MB available Windows Dir C Windows DirectX Version DirectX DX Setup Parameters Not found User DPI Setting Using System DPI System DPI Setting DPI percent DWM DPI Scaling Disabled DxDiag Version bit Unicode ------------ DxDiag Notes ------------ Display Tab No problems found Sound Tab No problems found Sound Tab No problems found Input Tab No problems found -------------------- DirectX Debug Levels -------------------- Direct D Failed message retail DirectDraw retail DirectInput retail DirectMusic retail DirectPlay retail DirectSound retail DirectShow retail --------------- Display Devices --------------- Card name Standard VGA Graphics Adapter Manufacturer Standard display types Chip type Intel r G GL GE GV Graphics Chip Accelerated VGA BIOS DAC type Failed message bit Device Key Enum PCI VEN amp DEV amp SUBSYS amp REV Display Memory n a Dedicated Memory n a Shared Memory n a Current Mode x bit Hz Monitor Name Generic PnP Monitor Monitor Model Monitor Id Native Mode Output Type Driver Name vga Driver File Version English Driver Version DDI Version unknown Driver Model unknown Driver Attributes Final Retail Driver Date Size bytes WHQL Logo d Yes WHQL Date Stamp Device Identifier D B E - - CF-D -C AADC CB Vendor ID x Device ID x SubSys ID x Revision ID x Driver Strong Name Unknown Rank Of Driver Unknown Video Accel Deinterlace Caps n a D D Overlay n a DXVA-HD n a DDraw Status Not Available D D Status Not Available AGP Status Not Available ------------- Sound Devices ------------- Description Speakers Realtek AC Audio Default Sound Playback Yes Default Voice Playback Yes Hardware ID PCI VEN amp DEV C amp SUBSYS amp REV Manufacturer ID Product ID Type WDM Driver Name RTKVAC SYS Driver Version English Driver Attributes Final Retail WHQL Logo d Yes Date and Size bytes Other Files Driver Provider Realtek Semiconductor Corp HW Accel Level Basic Cap Flags xF F Min Max Sample Rate Static Strm HW Mix Bufs Static Strm HW D Bufs HW Memory Voice Management No EAX tm Listen Src No No I DL tm Listen Src No No Sensaura tm ZoomFX tm No Description Realtek Digital Output Realtek AC Audio Default Sound Playback No Default Voice Playback No Hardware ID PCI VEN amp DEV C amp SUBSYS amp REV Manufacturer ID Product ID Type WDM Driver Name RTKVAC SYS Driver Version English Driver Attributes Final Retail WHQL Logo d Yes Date and Size bytes Other Files Driver Provider Realtek Semiconductor Corp HW Accel Level Basic Cap Flags xF F Min Max Sample Rate Static Strm HW Mix Bufs Static Strm HW D Bufs HW Memory Voice Management No EAX tm Listen Src No No I DL tm Listen Src No No Sensaura tm ZoomFX tm No --------------------- Sound Capture Devices --------------------- Description Microphone Realtek AC Audio Default Sound Capture Yes Default Voice Capture No Driver Name RTKVAC SYS Driver Version English Driver Attributes Final Retail Date and Size bytes Cap Flags x Format Flags xFFFFF Description Line In Realtek AC Audio Default Sound Capture No Default Voice Capture No Driver Name RTKVAC SYS Driver Version English Driver Attributes Final Retail Date and Size bytes Cap Flags x Format... Read more

A:Failed message

Wow thats alot of system stats, but I'm gonna go for the obvious unfortunately, am I right in saying that Sims 2 is for an older operating system than Windows 7? if so, try compatability mode. I had a similar problem with an older version of a codec being needed, yet I had a newer one, and it wouldnt run the game. As soon as I ticked compatability mode and selected the OS the game was meant for, the games run perfectly.
 

http://www.techspot.com/community/topics/failed-message.158088/
Relevancy 23.22%

I was just wondering what the members here at techspot thought about Boost mobile.. I was considering switching to boost mobile and wasn't sure about the service.

SOO, What are your thoughts?!!? Thanks =]
 

A:Boost Mobile service

did you see http://en.wikipedia.org/wiki/Boost_Mobile ?

Primary service is via Sprint - - how's your coverage and satisfaction with Sprint?
 

http://www.techspot.com/community/topics/boost-mobile-service.157204/
Relevancy 55.9%

Hi, in a rush.

I have seen a low profile cpu cooler that can have 2 standard 140 mm fans on it. It extends sideways from the cpu and not up. Good for Q-XPack 2 Apevia MicroATX.

Any Ideas?

Thanks a bunch!

12johnni

23.11.2010

edit: I am doing a X58 Micro in the Case and my friend is doing the same. I got him back from hell (iMacs) when he realised from me how much you can get for how little. With a small $2,000 Australian budget, you can have 1,000W PSU a MicroATX case
i7 950
GTX 580
EVGA X58 Micro SLI
etc. But the cooler has to be under about 8 cm for the Q-XPACK 2. Anyone know the best one?

Thanks!
 

A:Low profile CPU dual fan

Do what? Most low profile heatsinks only have one fan on them because they are top end mounted, pulling air directly off the heatsink, rather than side mounted. As far as I know, you WON'T find any low profile heatsink with more than 1 fan. I'd love to see one that does (Probably a wedge shaped heatsink...).That and you can't have 140mm fans mounted on the sides if you have an 80mm height restriction, unless they are at an angle. That being said If you know a place online/brick and mortar in Australia you can try finding:

Scythe Big Shuriken SCBSK-1000
COOLER MASTER GeminII S RR-CCH-PBU1-GP (Too big at 87mm, but you could use a smaller height fan and make it work)
EVERCOOL HPK-10025EA

Also, you don't need a 1000w PSU for that hardware, it is a waste of money. You could easily save some money (and possibly internal space) with a 750w PSU with modular cables.
 

http://www.techspot.com/community/topics/low-profile-cpu-dual-fan.157034/
Relevancy 54.18%

When I try to login to Windows a message is displayed quot Windows can t load the user s profile but has logged on with the login to - system default profile Cannot Windows default system profile Reason insufficient system resources exist to complete the Cannot login to Windows - default system profile requested service quot That isn t the message Cannot login to Windows - default system profile word for Cannot login to Windows - default system profile word because after seconds the message automatically closes Then there is only the cursor which can move and a blue back ground and nothing loads When I press ctr alt delete I get a message saying quot The application failed to initialize properly x d Click on OK to terminate the application quot When I press the power button the laptop goes into hibernation and when it comes out of it I need to re-enter the password so it s not completely dead It s a Compaq nx with Windows XP Pro Sometimes little things change for example this time it showed an message titled quot Parser Message quot but the body of the message failed to load Edit I tried booting into safe mode and it worked the next time I tried booting the laptop normally it worked Why does this happen EDIT but it only worked the one time after booting into safe mode Edit Every time I properly turn off the laptop it can t login the next time but if I hold down the power button it can login next time nbsp

A:Cannot login to Windows - default system profile

The hard drive is probably corrupt... Try formatting and re-installing XP
 

http://www.techspot.com/community/topics/cannot-login-to-windows-default-system-profile.156115/
Relevancy 20.21%

Ok so I was trying to help out business near where I work They have a a really old tower and just recently the CRT monitor (I settings! not display of out message error range Monitor think) - they were using had Monitor error message out of range - not display settings! (I think) a the green on light on it but the screen was completely blank I lent them a flat screen monitor thinking maybe the monitor had had it This time I got the start up stuff - american megatrends etc but when it started booting windows just before it displays the desktop it says out of range I managed to get into safe mode to change resolution etc but there was no option for changing refresh rate it was greyed out and set as default didnt say what number What could be causing this So the CRT monitor wouldnt display anything at all The flatscreen gave error message just before displaying the desktop Is it display settings Is it the graphics card I told them I can t fix it unless I ve got a spare graphics card to replace theirs with and their mobo doesn t have a monitor out built in I could easily wipe it and reinstall windows good idea for this year old computer anyway but I don t think this is the real problem I ve lent them a tower in the mean time to tide them over Any ideas on this Cheers nbsp

A:Monitor error message out of range - not display settings! (I think)

Possibly the graphics card or the power supply could be going south.
 

http://www.techspot.com/community/topics/monitor-error-message-out-of-range-not-display-settings-i-think.156361/
Relevancy 32.25%

I have an old laptop that contracted a virus that I couldn't purge. So, I reformatted the harddrive using DBAN. Then I booted the laptop with Windows XP. Now I'm trying to connect to the internet using a LAN connection and am getting no connection.

I have a Dell Latitude D810. I went to the Dell site (on my working desktop) and attempted to download all of the drivers onto a flash drive to transfer to the laptop. I tried double-clicking on the downloads that I had (downloaded all of the "recommended" links available) and nothing really happens.

As you can tell I have very little knowledge with this part of laptop setup.

Any suggestions would be greatly appreciated.

Thanks!
 

A:Reformatted comp, loaded Windows XP and now can't connect to Internet

Hi, You have installed XP on the laptop, so did it install right through to the desktop?
And you have entered the product key? Can you go into the BIOS and check that the LAN setting is enabled? If so, it should be able to connect to the 'net, assuming there are no other problems. Then you should be able to go to Dell's site and download all the drivers provided by them for your laptop. There may be several drivers you need that must be downloaded from their own makers sites. You can find out which by using, Control panel, system, device manager. Look for the devices with yellow triangles next to them. That indicates that the driver is either faulty, or more likely, missing. Hope that makes sense.
 

http://www.techspot.com/community/topics/reformatted-comp-loaded-windows-xp-and-now-cant-connect-to-internet.156312/
Relevancy 22.36%

I have lost all sound and there is the quot x quot next to my speaker icon on the bottom right I have read what other people have done here and none of the fixes have helped If I right click on the speaker icon I get the quot Would you like to enable Windows Audio quot message If I say yes I do NOT get an error It goes to the screens about my audio But my audio is obviously not working So I go to the Windows Audio in the Services section It Audio Service not running Vista/Toshiba laptop is on automatic but not running When I try to run it I get the message quot Windows could not start the Window Audio service on the local computer Error The account specified for this service is different from the account specified for other services running in the same process quot I have looked at all of the dependent services Plug N Play Multimedia Class Scheduler Remote Procedure Call Windows Audio Endpoint Builder Those are Audio Service not running Vista/Toshiba laptop ALL automatic and Running I saw someone mention something about going to the Registry Editor to remove dependencies but I couldn t figure out the registry looked like lots of gobblegook to me but since all of my dependent processes are running just fine Audio Service not running Vista/Toshiba laptop I don t think that would be the answer anyway Any other ideas of what I can try Also All of my sound drivers are working properly and I have no error messages that I can find I am not sure if this is relevant Product Host Process for Windows Services Problem Windows Update installation problem Date AM Status Not Reported Description A Windows update did not install properly Sending the following information to Microsoft can help improve the software Problem signature Problem Event Name Audio Service not running Vista/Toshiba laptop WindowsUpdateFailure ClientVersion Win HResult UpdateId DA B A-FD E- EB - -FFC B EB Scenario Install SourceId Environment Unmanaged OS Version Locale ID There is one of these for every day for a week But the sound problem has only existed for days nbsp

A:Audio Service not running Vista/Toshiba laptop

I saw someone mention something about going to the Registry Editor to remove dependencies but I couldn't figure out the registry (looked like lots of gobblegook to me) but since all of my dependent processes are running just fine, I don't think that would be the answer anyway.Click to expand...

You're absolutely right. DON'T try modifying the registry for this problem. Is far more likely to do damage then any good

A few thoughts...

1. I'd first attempt to simply uninstall then reinstall your audio drivers. To uninstall, look in Ctrl Panel->Program and Features and look for your audio to uninstall. Locate the driver download from the vendor website for your computer to reinstall

2. If reinstalling doesn't solve it Also, take a look at Reference Guide to Help Setup and Troubleshoot Windows Audio and Sound Cards

3. Tho I'll also mention that SOMETIMES malware can be what interferes with audio service and prevents it from running. I mention this to also keep in mind because you say Windows Update is also reporting errors. Both your audio and Windows update problem might due to malware.

In any case, try reinstalling first and post back with any results
 

http://www.techspot.com/community/topics/audio-service-not-running-vista-toshiba-laptop.155858/
Relevancy 23.65%

Hey guys,

Windows Vista 32-bit
AMD Athlon 64x2 Dual core processor 6400 +
2gb ram
Nvidia Geforce 9600 GT

So I went to Nvidia and downloaded the latest driver, at the time it was 260.89 I believe and it failed, and so does the most current driver (260.99). But when I tried to download it my first time (260.89), it totally changed everything:

1. Now I can't play ANY games because it gives me error messages like "Unable to initialize renderer"
2. DxDiag only shows "N/A" next to basically everything under the Display tab.
3. The sleep option is now grayed out

Whenever I try to download the drivers again the Graphics Driver installation always fails.

So what the hell happened? Does anyone know how to fix this?
 

A:Nvidia 260.99 graphics driver install failed

Hi Nohone welcome to Techspot,

have you tried doing a rollback on the graphics card? this will hopefully revert your drivers back to the origional setup. You can do this from the hardware setup OR via system restore and re-set your computer BACK to a date before you installed the drivers. This wont effect your personal files but MAY effect any new software you may have installed.

Also make sure you ahve downloaded the correct drivers for it i.e. the VISTA-32 bit drivers instead of the VISTA-64 bit drivers.

A link for the latest driver for your graphics card can be found here:
http://www.nvidia.com/object/win7-winvista-32bit-260.99-whql-driver.html


Hope this helps
James
 

http://www.techspot.com/community/topics/nvidia-260-99-graphics-driver-install-failed.155574/
Relevancy 23.65%

I just bought this re-conditioned emachine from tigerdirect.com and it has worked great...till about a week or so ago the monitor will not come on. i tried another monitor and nothing happened, and i put both monitors on older computer and worked just fine. i figured it is the onboard graphics card but i do not know what graphics card to buy that will fit and work properly. i have found some on ebay but do not know if they are compatible. I dont need anything super fast just want it to work same as the old one. It says it has NVIDIA GeForce 7050 Integrated. Thank you
 

A:Emachines ET1831-01 graphics failed

Looking at the newegg page for that item ( Emachines ET1831-01 ) it seems it has a PCI-Express x16 slot open.

So, any PCI-Express card would work, such as:
HD3450

Which is a decent card for regular stuff the 7050 would've taken care of, plus it'll do a decent job on video.
 

http://www.techspot.com/community/topics/emachines-et1831-01-graphics-failed.155230/
Relevancy 23.22%

Hello I checked many websites not Audio running Service is amp forums to solution for my problem before posting the question here A week back my Computer s Audio started giving me problems At first the audio used to stop suddenly during normal working amp wouldn t return Audio Service is not running unless I restart my system So I tried reinstalling my sound driver amp was successful in doing that But now I see an quot X quot mark near the Sound Icon on my task bar amp says quot Audio Service is not running quot Here are the trouble shooting I did Control Panel -- gt Administrative Tools -- gt Services Plug amp Play is ON amp Automatic Multimedia is ON amp Automatic Windows Audio Endpoint Builder is stopped Windows Audio is stopped I tried starting the Windows audio Endpoint Builder amp the following error msg appears quot windows could not start the windows audio endpoint builder service on local computer quot quot Error x The system cannot find the file specified quot Under path for executable I saw that it is looking for a file Audio Service is not running named svchost exe File seems to be present at the location though nothing seem to happen when I try double clicking it Please help in resolving this issue Since I purchased an HP Laptop with Windows Vista they didnt give me a separate Vista DVD to try amp reinstall it all over again Help nbsp

A:Audio Service is not running

1) HP usually includes a "Recovery Partition" on your hard drive. You can use to
=> Restore your installation using their Recovery Partition and
=> I usually allow you the option of creating ONE set of recovery DVDs on your own

2) You only want to focus on Windows Audio service. Do you see StartupType= Automatic or ??? Is it's Status=Stopped? Can you restart Windows Audio?
 

http://www.techspot.com/community/topics/audio-service-is-not-running.146707/