Windows Support Forum

Hard factory reset Win7 Desktop

Q: Hard factory reset Win7 Desktop

Last Saturday my computer encountered a problem and i cant seem to fix it so Ill just have to hard reset my desktop if thats possible?
Is there like a button in the CPU or on the motherboard to press to reset it all?
Its not reinstalling windows because i do not have the discs.
And also if i reset it, will it delete my files on my Back-up drive (F:) ?
regards.

Relevancy 100%
Preferred Solution: Hard factory reset Win7 Desktop

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Hard factory reset Win7 Desktop

Placidus:
 
Before resorting to a Factory Restore, could you describe your computer and the problem that you are having?  There is a tremendous amount of expertise here on this Forum, and they might be able to find a solution that preserves everything.
 
Most computers have a recovery partition and it is a matter of pressing an F# key to initiate a factory image recovery, but I would not do that until I had backed up all of my data to an external drive.  Some companies, like Acer, claim that they will put your data in a separate folder and preserve it, but that did not work on a friend's computer that did require a factory restore.  You do not need the Windows disks if you do a factory restore, at least in most cases that I am aware of.  I am not a pro here.
 
Is your backup drive an external USB drive?  If so, make sure it is unplugged ... just in case.  If not, copy your backups, after they have been verified by the backup program (assuming you are not using Windows backup), to ensure that they are good, and make sure that you have created a backup recovery CD to boot from just in case the factory recovery is not successful.  They can fail if the recovery partition is corrupt, or their are issues with the sector integrity on Drive C:\.
 
I really recommend that you post more information to assist the pros here (not me) to help you correctly diagnose what the real issue is.  If you have a dying hard drive, for example, doing a factory restore is a waste of time.
 
Hope this helps.  Have a great day.
 
Regards,
-Phil

http://www.bleepingcomputer.com/forums/t/574235/hard-factory-reset-win7-desktop/
Relevancy 17.2%

I sometimes wonder about techs using tools such as Seatools, HDD regenerator etc to diagnose/repair hard drives. Do any of these tools beat Chkdsk in any way?
(besides data recovery tools, I guess those have no match in Windows).

Thank you
 

A:Do you need more than Windows default tools to check/repair a hard drive?

IMO, always use the tool provided by the vender. At the time you need this tool, you don't need a 3rd party screw-up to 'help you' really mess it up.
 

http://www.techspot.com/community/topics/do-you-need-more-than-windows-default-tools-to-check-repair-a-hard-drive.217548/
Relevancy 16.77%

I've said time and time again that solid state drives are the future but the truth of the matter is, traditional spinning disks still have a place inside a modern PC as a storage / backup drive. The question then becomes,...

Read more
 

A:Latest hard drive reliability data reveals it may be best to avoid 3TB drives

Well I'm glad I have never bought a Seagate HD. I usually buy Western Digital, except my SSD is Samsung.
 

http://www.techspot.com/community/topics/latest-hard-drive-reliability-data-reveals-it-may-be-best-to-avoid-3tb-drives.208285/
Relevancy 26.23%

I have an old Toshiba laptop and it is unusable and I was wondering if there was a way to factory reset it without a disk.

Model # - psk2cu-s5150
 

A:Reset My Laptop

I believe there's a partition that contains the OEM setup, but you need a CD (any) and to recover from the Restore partition
 

http://www.techspot.com/community/topics/reset-my-laptop.217201/
Relevancy 18.92%

While Intel has dominated the high-performance CPU market for years, AMD continues to provide value to those on a budget with their reasonably attractive range of APUs. Today, the company has announced a new APU, the A8-7670K, that slots into...

Read more
 

A:AMD launches another desktop APU, the A8-7670K

This is so ho-hum. When are AMD gonna release some real boy racer stuff?
 

http://www.techspot.com/community/topics/amd-launches-another-desktop-apu-the-a8-7670k.216692/
Relevancy 18.92%

Hi Could anyone please confirm if I buy Samsung 850 Evo 500GB, will I be able to install this on my desktop? Just looks like it only fits for laptops?

Thank you
 

A:Samsung 850 Evo 500GB, want to install on desktop

There are adapters available if the drive doesn't come with them packaged. The adapters adapt from 3.5" drive bay to 2.5" drive bay.

http://www.newegg.com/Product/Produ...scription=hdd+adapter+bracket&N=-1&isNodeId=1
 

http://www.techspot.com/community/topics/samsung-850-evo-500gb-want-to-install-on-desktop.216637/
Relevancy 22.36%

SO close Help me get this ball across the goal line I have a old quot Microtek ScanMaker E quot scsi flatbed scanner that originally came with an ISA scsi interface to give you some idea of how old it is I connected it to my PC using a equally ancient Tekram F pci SCSI card c 64bit my got scanner Almost w/Win7 old working that I ve been using with bit WinXP Pro for years The scanner has an - quot x quot scanning bed dpi and bit color reproduction It works great and I see no reason to spend a few hundred dollars to replace it just for Win compatibility so I m trying to get it to work with the bit Almost got my old scanner working w/Win7 64bit version of Windows To complicate things the company that made my SCSI card Tekram went out of business years ago so the bit XP driver was the last they made But after MUCH Googling I found a bit Win compatible driver for another card using the same chipset and low amp behold Windows recognized it It then quot detected quot my scanner for the first time but didn t have a driver Again after much searching I found a Vista bit version of Microtek s quot ScanWizard quot scanner software with bit driver and now bit Windows detects my scanner Yeah But when I try to access the scanner I get an error telling me I quot must install Color Matching System first quot for the scanner to work I don t remember any such software being needed to use the scanner with XP and there is no such program in the ScanWizard software I just installed searching online suggests I will also need to run an quot ICC Color Profiler quot Anyone have any ideas So close yet so far I love doing things I was told were quot impossible quot Help nbsp

A:Almost got my old scanner working w/Win7 64bit

That Microtek ScanMaker E3 scsi flatbed scanner ... didn't even work well with Windows XP... and the cost in time and components to attempt to make it work are much higher than a decent Canon or Epson scanner which can be had fof $40... Less if used...

On what system are you runny SCSI ?
 

http://www.techspot.com/community/topics/almost-got-my-old-scanner-working-w-win7-64bit.157055/
Relevancy 15.48%

Hello I have a Dell Inspiron laptop I have an image of the entire hard drive that I created when I first got the computer using Acronis TrueImage and I d like to restore that image returning the laptop back to that fresh clean original state I ve done this two or three times before and it worked great each time But now there s a problem Normally I would in boots as when drive external but laptop hard Primary recognized isn't drive used connect to the laptop a USB storage backup drive that has the disk image boot the laptop from a Rescue Media CD created by Acronis then restore that disk image from the back-up drive onto the laptop s HDD When I tried it this time round the laptop s HDD was not listed in TrueImage at all I created a new rescue media disk tried it again and got the same result I then took the HDD out of the laptop connected it to Primary hard drive boots in laptop but isn't recognized when used as external drive an adapter kit that let s you power up and plug in the drive via a USB port and external power supply and tried the same procedure using my desktop to run the operation Same result The drive was not detected by Acronis The drive does not seem to spin up at all Primary hard drive boots in laptop but isn't recognized when used as external drive when it is connected Keep in mind the drive still works when installed in the laptop -- it boots into Windows XP etc When I plug the drive into my desktop the drive does not show up in Disk Management Start Right-click My Computer Manage Disk Management It doesn t show up in either of the two right-side windows so there s no way I know of to format it or do any work on it in Windows When I go to Device Manager Disk Drives I see quot USB Device quot for that drive and under Properties it is listed as quot Disk Drives quot for quot Device Type quot and its status says it is working properly So what I don t get is it works fine when it is in the laptop boots into XP etc but when connected as an external drive or when the laptop is being run off of CD the drive can t be detected and not on just one computer but multiple Is it junk Any ideas nbsp

A:Primary hard drive boots in laptop but isn't recognized when used as external drive

It's a power issue. Had the same issue taking a 2.5" laptop hdd and attempting to hook up w/ a passive usb sata hdd cable. my recommendation is to use a powered usb sata cable. like this one: http://www.newegg.com/Product/Product.aspx?Item=N82E16812119475 having proper power will allow the USB bus to detect and power the hdd correctly. Hope this helps, take care!
 

http://www.techspot.com/community/topics/primary-hard-drive-boots-in-laptop-but-isnt-recognized-when-used-as-external-drive.174938/
Relevancy 17.63%

Today, my external hard drive has not appeared on my PC. It did work before I went to sleep yet when I began my PC in the next morning, it didn't show. Can you please help me how to fix this?
 

A:External hard drive not showing up on my PC

Hello there,

There are a lot of different reasons for an HDD to stop showing. A few things you can try are:

Try using a different USB cable, make sure it is as short as the original one, or even shorter. This is important it terms of providing enough power for the drive to function properly.

Try connecting it to different USB ports.

Try connecting it to a different PC.

Sometimes the drive can misbehave due to insufficient power even if it appears to be spinning make sure you connect the HDD directly to the USB port and not through a USB hub.

Check if you can see the HDD in Windows Device Manager and in Disk Management. Good luck.
 

http://www.techspot.com/community/topics/external-hard-drive-not-showing-up-on-my-pc.209548/
Relevancy 18.06%

Intel has launched a selection of new 5th-generation Core processors based on the company's Broadwell microarchitecture. Five of these new CPUs are designed for performance mobile and IoT devices, while two are socketed desktop CPUs for Intel's LGA 1150 platform,...

Read more
 

A:Intel launches new Broadwell CPUs for performance mobile, socketed desktop

The full list of socketed desktop and performance mobile Broadwell CPUs can be found below.Click to expand...

the two pictures link to only R series (socketed/1364, BGA/soldered to motherboard) and mobile/IOT processors. C series (unlocked, socketed/1150) are not shown in the two pictures but are listed in the article.
 

http://www.techspot.com/community/topics/intel-launches-new-broadwell-cpus-for-performance-mobile-socketed-desktop.213613/
Relevancy 17.63%

Dear frnds,

I have been using my external hard disk(WD My Passport Essential SE) 1 Tb, since last 6 months, but after a recent virus scan, my laptop is not showing the external hard disk, i have tried using My computer, Manage and Disk management.

I am unable to find external hard disk even in Disk management i.e. it is not showing.
So please can anyone help me in this concern......
I would really appreciate and thanks in advance
 

A:Problem with my external WD 1TB My Passport hard disk

First, try accessing it from another computer to be sure it can be accessed elsewhere. The Western Digital Passport Essential has had a pretty high failure rate as seen in our shop... so the unavailable external hard disk may not have anything to do with the virus scan may have nothing to do with the problem.

In other cases, I would attempt to reinstall the Passport drive. You do not usually cause any damage to the data on the drive when you do this.
 

http://www.techspot.com/community/topics/problem-with-my-external-wd-1tb-my-passport-hard-disk.176021/
Relevancy 17.2%

Hi

Thanks for any help in advance..

I own a WD MyBook 4TB hard drive, which I've used on Windows for the past 2 years. I got a macbook last week and hooked the drive into it, some error message came up so I figured it wouldn't work, however when I went to plug it back into my windows machine I got the "USB device not recognised" message, the laptop is windows 8. I then tried it on my fathers windows xp computer and it seemed to think it was a completely new hard drive..

I've done some googling on it but I just wanted to ask here incase I went formatting it by mistake or anything..any advice/help would be greatly appreciated.

Thanks
 

A:External USB hard drive not recognised on Windows after plugging it into a Mac

Sounds like you made some procedural error, allowing the Mac to alter the partition - - bad choice.

Using Windows tools, examine the partition on that drive - - should show up as
somelabel (dl): size HTFS
Healthy (other qualifiers)​
Try Control Panel ->Admin Tools->Computer Mgmt->Disk Mgmt
 

http://www.techspot.com/community/topics/external-usb-hard-drive-not-recognised-on-windows-after-plugging-it-into-a-mac.200827/
Relevancy 17.63%

A leaked Intel roadmap tipped us off in January that desktop versions of Intel's Broadwell CPU would arrive by the middle of this year. We now know that information to be true.

Read more
 

A:Intel: overclocker-friendly 14nm desktop Broadwell CPUs to arrive by mid-year

Sounds exciting, I'll wait for that to hit the shelfs.
 

http://www.techspot.com/community/topics/intel-overclocker-friendly-14nm-desktop-broadwell-cpus-to-arrive-by-mid-year.209438/
Relevancy 18.92%

AMD is today launching the A10-7870K, a new, high-end desktop APU that provides minor spec bumps over the company's previous desktop APU flagship at a similarly competitive price point.

Read more
 

A:AMD launches the A10-7870K, a new high-end desktop APU

The pricing is what kicks Intel in the nuts, which is great if you going for a low budget computer and don't mind not having a dedicated video card.
 

http://www.techspot.com/community/topics/amd-launches-the-a10-7870k-a-new-high-end-desktop-apu.213480/
Relevancy 17.63%

Hi I have a few questions about my external hard drive. I play games and I noticed that my internal hard drive was getting full so I bought a new external hard drive. I was wondering if I backed up my internal hard drive to my external one and then formatted my internal hard drive, would I have to re install everything or would I be able to access my games and such. Thanks for your time its much appreciated.
 

A:External Hard Drive

You would have to e-install all of your games, and applications, and windows updates
 

http://www.techspot.com/community/topics/external-hard-drive.213122/
Relevancy 18.06%

I don't really know a lot about upgrading my computer. Any help would be great. Thanks.
 

A:Budget upgrade for HP/Compaq Presario CQ5000 Series Desktop CQ5802

I forgot to mention I am trying to make it run games like CS:GO and DayZ at a reasonable level.
 

http://www.techspot.com/community/topics/budget-upgrade-for-hp-compaq-presario-cq5000-series-desktop-cq5802.212644/
Relevancy 18.92%

I currently own a dell XPS 8300 with the following specs:

Processor: i7 2600 3.4 ghz quad core
RAM: 12 gb
GPU: AMD Radeon HD 6670
PSU: 460W
I am a computer science student and plan on using unreal engine 4 for some game development. I also plan to do some gaming over the next 4 months.

What do you guys think I need to upgrade, if at all? I don't want to spend too much money, I recently received a $75 gift card for best buy and would prefer to use that towards my purchase.

What do you guys think of the following:

ZOTAC GeForce 750 Ti 2GB

Diamond Radeon R7 250 OC 1GB GDDR5

ZOTAC GeForce GTX 750 2GB GDDR5
 

Relevancy 16.77%

I have a three month old Dell Dimension GHZ P Gig Ram and a gig SATA Hard Drive When I got the computer I used the files and transfer PC Relocator utility And had in Error system drives did hard Message: disk find Setup not your installed any a bunch of unwanted extras that came with it I m having a Satellite Internet system installed and they wanted a clean install of windows XP So I opened the owner s manual and got out the reinstallation disk and the problems began By the way Dell tech support s only response has been to say gee that s not right and would send a tech sometime after Christmas Anyway heres step by step what I did I boot to the Dell reinstallation disk Error Message: Setup did not find any hard disk drives installed in your system The windows setup screen appears and loads files The next screen says welcome to setup and offers three options -to setup XP press enters To repair XP press R to exit without installing XP press F I press enter and the following message comes up Setup did not find any hard disk installed in your computer Make sure any hard disk drives are powered on and properly connected And any disk related configuration is correct ect Press F to quit It dose this if I try repair also Dell had me check the connections to the HD and Motherboard They re good And debug the hard drive No luck Everything worked fine until I put in the reinstallation disk Any help would be welcome nbsp

A:Error Message: Setup did not find any hard disk drives installed in your system

During Setup, it will ask you if you need any extra drivers such as SCSI (or SATA in your case). If so, press F6. Now you are in trouble, because SATA drivers come on a floppy and new(er) Dells don't have a floppy anymore. Borrow a floppy-drive from another PC and install that in your Dell.
Setting up with the Dell disks, I'm not sure if they are RESTORE-disks or full XP-disks.
That may cause another problem.
 

http://www.techspot.com/community/topics/error-message-setup-did-not-find-any-hard-disk-drives-installed-in-your-system.18329/
Relevancy 17.2%

Guys I need all the expert help I can get I ve got a Western Digital quot My Book quot i think it was called that that has had every picture that me and my girlfriend have ever corrupt drive hard photos All on newborn external taken including when we first met holidays pets and most importantly pictures of All newborn photos corrupt on external hard drive my girlfriends pregnancy and s of photo s of our month old son that have all gone missing and even some other photo s that still show the thumbnail image don t open because I get an error saying that photo s are corrupt or damaged my girlfriend is already going mad and I don t know what software to get them back At present i ve tried opening with different picture veiwers like photoshop no luck I ve tried EASEUS Photo recovery software but then cancelled because I read that Recova could do a better job turns out recova doesn t work on external drives NOW NOTHING WILL OPEN ON THE EXTERNAL HDD I need some expert advise on what program WORKS to try and recovery these files A S A P because otherwise we will be devistated I don t wanna buy loads diferent software only to find that i m doing more damage nbsp

A:All newborn photos corrupt on external hard drive

try pc inspector file recovery. http://www.snapfiles.com/get/smartrecovery.html

ALWAYS back up photos to more than one device.
 

http://www.techspot.com/community/topics/all-newborn-photos-corrupt-on-external-hard-drive.156964/
Relevancy 25.37%

Hello I need to connect power/reset buttons to dell optiplex 620, but I just can't connect them anywhere on motherboard.

I need help as fast as possible

Thank you
 

http://www.techspot.com/community/topics/dell-optiplex-620-connect-power-reset-buttons.212270/
Relevancy 17.2%

Hello I need urgent help with resolving this as I am trying to get the harddrive showing up or at least recover files by Hard Portable Drive External Slim detected Seagate PC not I was using it at school first and my computer froze so I shut down the Seagate Portable External Hard Drive Slim not detected by PC computer and restarted without safely removing Seagate Portable External Hard Drive Slim not detected by PC the hard drive at first the PC wouldnt reboot because I had it still plugged in after unplugging it and the PC loaded up it did not recognize the hard drive anymore I have tried it on several PCs including the one at home all using Windows and none of them recognize it I tried all USB ports on my PC and none of them work the light on the hard drive is ON so I know there is no connectivity issue I tried several free trial softwares even the ones by Seagate and none of them recognized the drive so I cannot use their tools for recovering files or detecting the hard drive When I check the Disk Management it does not show there When I check the Device Manager it does not show under USB controllers but it DOES show under Disk Drives I also checked and the drive is up to date The Model is BUP Slim BK In my quick launch the drive is recognized there and gives me the option to Eject it but it doesn t actually Eject it when I click on it it either stop responding or does nothing unless I manually unplug it EDIT After a really long time the Eject message says the device is already in use which is probably why it doesnt Safely eject nbsp

A:Seagate Portable External Hard Drive Slim not detected by PC

I am also having the same problem, as I need to get some stuff off my hard drive but it does not show up on any of it, was just wondering if you had found a way to fix this yet?
Kind Regards
 

http://www.techspot.com/community/topics/seagate-portable-external-hard-drive-slim-not-detected-by-pc.207640/
Relevancy 18.92%

I would like to get gaming desktop computer and would like to know if Alienware would for get compute to I like under gaming $650 desktop or computer from Dell or Dell Alienware is good way to go or not Are mini computers like from Alienware or from Dell good for gaming http www dell com us p alienware-x -r pd aspx Are these Alienware or mini computers good for gaming Or is full desktop tower better I was thinking of buying computer of ebay Looks like it may be good computer http www ebay com itm AMD-Quad-Co pt LH DefaultDomain amp hash item b d But I think it may be build computer kit You have to put the computer together Buying computer from Best buy you are stuck with brand name computer like Acer or Gateway being very cheap and low budget computers or HP or Asus better and more costly computers I would like to get gaming desktop compute for under $650 CyberPowerPC and iBUYPOWER Gamerner PC both over price and not reliable computer lots of lots hardware problems I would like to get gaming desktop compute for under $650 and outdated Well build computer kits are good but you have to put it together and you get no software and windows does not come with it And Best buy office place business depot or target computers are over price and like years old Not sure if I should go for a full tower or mini tower The computer will be hooked up to my big TV for gaming I will also be doing some video editing and sound editing too and some basic Microsoft office apps Some games will be The Elder Scrolls V Skyrim Dark Souls Witcher Dragon Age II Divinity II Diablo Mass Effect Far Cry Risen Fallout Grand Theft Auto and Doom so on The budget no more than Is Dell Alienware or ebay a better way to go nbsp

http://www.techspot.com/community/topics/i-would-like-to-get-gaming-desktop-compute-for-under-650.210559/
Relevancy 17.2%

Look no further than a solid state drive for breakneck speed. If a large-capacity drive for storage is what you're after, however, traditional spinning hard drives are still the best bet in terms of price per GB. And if you...

Read more
 

A:Western Digital 'Green' hard drives now available in capacities up to 6TB

On a more interesting note, Seagate is already shipping 8TB HDD-s to its select customers, with 10TB ones to follow.

Besides, nothing beats the current 6TB Enterprise offer from Seagate anyway, in terms of price+performance+capacity. Let Western Digital lag behind as it does
 

http://www.techspot.com/community/topics/western-digital-green-hard-drives-now-available-in-capacities-up-to-6tb.204017/
Relevancy 17.2%

Hey,

Yesterday, I was working with my PC while my 1TB Seagate external hard (http://www.amazon.com/Seagate-FreeAgent-Ultra-Portable-External-STAA1000101/dp/B0045JLPMO) was plugged in via USB. The USB connection was a little bit loose.

Then when I was plugging a USB flash memory in, I noticed that the external hard was disconnected.
I connected it again, but it didn't appear in My Computer.
Here is the state in Disk Management and Device Manager:




After that, I plugged out the "SATA to USB converter" from the hard and connected it directly to SATA cable inside the PC case (like internal HDD), but this time nothing showed up in Disk Management, Device Manager and BIOS. However, it took a long time for the system to boot.


I searched and read lots of threads and tested some other stuff:





(It didn't appear in Minitool Partion Wizad).

I've got a lot of data on this HDD which really matters to me.
Any help is really appreciated.
 

A:FreeAgent 1TB External Hard stopped working (unknown, not initialized)

Hi there Sedhadi,

If your HDD is failing the manufacturer's tests it is probably dead. IF you need to get your data back look for a reputable data recovery company in the area.
Hope that helps.
 

http://www.techspot.com/community/topics/freeagent-1tb-external-hard-stopped-working-unknown-not-initialized.208828/
Relevancy 17.2%

When booting up my computer, directly after auto-detecting SATA devices, my computer regularly gives me an error that alternately reads "Primary Hard Disk Failure, Press F1 to Resume..." or "Secondary Hard Disk Failure, Press F1 to Resume..." Sometimes the word "Slave" or "Master" are there after the words "Primary" or "Secondary" in there as well. While the content of the message varies, the result is usually the same: The startup process lags after auto-detecting the drives, then gives me this error.

I have three SATA hard drives and a DVD drive plugged in to my mb via SATA. When no HDD are detached, but I have boot media in the DVD drive, the computer starts up quickly and normally, with no errors. When any or all of the HDDs are plugged in, I receive the above error. I borrowed a HDD from my roommate, plugged it in, attempted to boot up and still received the error. None of the HDD are bad, and it would be a pretty big coincidence for all four I've tested to fail at once.

What could the problem be?
 

A:Primary Hard Disk Failure, Press F1 to Resume

UPDATE:

When I plug in just one or two of the HDD + the DVD drive, the computer boots fine. When I plug in three HDD + DVD drive, failure! Do I perhaps need to upgrade my power supply?
 

http://www.techspot.com/community/topics/primary-hard-disk-failure-press-f1-to-resume.208761/
Relevancy 27.52%

Hi my name is Rafael of Brazil, rode a computer gamer very good, the settings I put down. My CPU is theoretically very good, but I can not play with it, the cooler that comes with the processor does not maintains the temperature when the BF 4 game with full graphics of 50 fps, but a few minutes later he shuts down and restarts in the middle of the game I think the manufacturing cooler's fault, because he goes from 100 degrees (HWMonitor), I will put an exhaust fan and I'm thinking about changing the cooler, am among the Hyper 212 EVO and H60. What would be better to cool off without the need for overclocking.
 

A:A10 6800k processor with factory cooler. Hyper 212 or H60

I would like someone to help me, which of these coolers is better. Hyper 212 EVO or H60?
 

http://www.techspot.com/community/topics/a10-6800k-processor-with-factory-cooler-hyper-212-or-h60.207197/
Relevancy 17.2%

Hey guys weird problem here The TB internal drive in my PC started slowly dying in December and my brother got me an SSD additional and connecting when laggy hard drives PC sluggish for Christmas I installed it and it works amazing flawlessly and I love it When I attempted to make my old dying drive a secondary hard drive Windows PC laggy and sluggish when connecting additional hard drives recognized it fine despite the SATA connection broken off and I was able to salvage what I wanted from it The speed of the transfer was blazing and I was pretty happy but I noticed Windows getting insanely laggy and sluggish The mouse would stop moving every few inches and the keyboard would stop responding Instead of normal lag such as me typing this sentence nothing happening and then it appearing in full a few seconds later when the lag would catch up it would be a jumble of letters For example if I typed quot wow my computer is going slow right now quot it would come out quot wom mpui gin sright n quot That s a new type of lag for me as my PC has never had issues I assumed this was due to the death of the drive and Windows having problems recognizing it or reading it Sure enough when I disconnected it everything ran smoothly I have an iOmega TB external drive LDHD-UP - don t judge it was on sale that I m not too fond of but I use regularly for storage and backup I usually have it plugged into the back of my PC and this presents a whole other issue which I need another thread for but I ve dealt with it fine and it normally works all right However I found out it s USB compatible and my PC has outlets on the top so I wanted to keep it plugged into there But when I do that I experience that exact same type of lag as before when the internal hard drive was plugged in It s persistent and near-constant but it stops the second I turn off the hard drive I ve disabled antivirus I ve ran disckchecks I ve formatted none of it makes a difference Does anyone know what would be causing this with separate hard drives connected in completely different ways Any help would be greatly appreciated nbsp

A:PC laggy and sluggish when connecting additional hard drives

I don't know the answer but will comment about the issue of lag in typing. I have a wireless keyboard and mouse and I know when the batteries need replacing because the keyboard behaves exactly like yours and the mouse stops moving the cursor properly. Maybe your issue's connected with the power being drawn when you have the two drives connected. Don't rush out and upgrade your psu though. I only switch on my usb external hard drive for the occasions I need it.
 

http://www.techspot.com/community/topics/pc-laggy-and-sluggish-when-connecting-additional-hard-drives.207975/
Relevancy 17.63%

I am building a new system, only part used is the power supply. My motherboard can't detect my hard drive. I tried switching cables but it only detects my dvd drive. Any assistance will be greatly appreciated.
 

A:Can't detect hard drive

First make shure the data & power cables are plugged in securely, on both the MB and hard drive. and no there is not a power cable for the hard drive on the MB.
 

http://www.techspot.com/community/topics/cant-detect-hard-drive.207744/
Relevancy 17.2%

Is there any way of sharing hard drives/folder over the internet with the client side need to install anything.
I.e use add network location option in my computer
Or a client programme that is user friendly

The server side will need to run on my computer,
looked at FreeNas thats not an option,
Filezilla looks like it the best option server side of things but uses a client programe.

Im happy to run any programmes/OS's in a VM if that were needed.

Thanks in Advance
 

http://www.techspot.com/community/topics/sharing-hard-drive-over-internet-without-client-programes.207578/
Relevancy 16.77%

I had a new PC so I thought I would do a recovery disk on a separate partition of my parent's disk. Turns out windows wipes out everything regardless of partition when it does that. So now lifelong memories are gone and I'm freaking out! I used EaseUS to make different partitions which were deleted. After I found that the partition I chose stayed the same size but was renamed RECOVERY and it had the recovery data in it. However the rest was "unused" and so I dragged the RECOVERY to make full use of the disk and then I started scanning it deeply with hard drive recovery software. I am now through scanning with my 2nd program now (1st one didn't give me the files I needed) and I'm using RecoverMyFiles. The problem is I'm not really getting back any of the files I had deleted by windows, but I get some stupid windows files which were probably deleted in the recovery process!! PLEASE help me!!! I am desperate. Future hanging in balance thank you.
 

A:Recovering Lifelong Memories from Windows Recovery-Wiped External Hard Drive

There are quite a few programs you could try, I have had most success with Recuva by Piriform, but recently this program was said to be excellent by a user,
http://www.ylcomputing.com/content/view/350/153/
Obviously it's worthwhile trying both of them.
 

http://www.techspot.com/community/topics/recovering-lifelong-memories-from-windows-recovery-wiped-external-hard-drive.207350/
Relevancy 22.36%

Hi all Apologies in advance for such a long post I headaches + installation = hardware New Win7 don t know if I just have a corrupt New hardware + Win7 installation = headaches Windows Ultimate installation or what but this all started three weeks ago or so after installing new hardware specifically New hardware + Win7 installation = headaches motherboard Asus A M-A New hardware + Win7 installation = headaches processor AMD A K and RAM Kingston HyperX GB DDR Since I had the extra RAM slot I also put in one of the Aeneon XTune GB DDR I have from before the upgrade The sticker on it says it s but it shows up in BIOS POST as Since then I ve had the following problems Internet Unable to establish any connection at all when using the ethernet cable plugged into my Cisco Linksys EA Router I can connect wirelessly but that connection is lousy and I m not sure why especially since the router is only about feet from the computer To be fair the lousy wireless connection is something I was dealing with since before the hardware upgrade Windows reinstall which is why I finally gave up and bought a ethernet cable the computer used to be in a different room though on the same floor of the house The problem with being unable to get any type of connection when plugged in started after reinstalling Windows and then doing something like updates and then moving the PC to the new spot I made a point of moving the tower myself just so that I could be sure nothing happened to it so I know there was no physical damage done because of dropping or otherwise banging it around at all I ve checked the ethernet cable that runs from the modem to the router as well as the one and neither of them appear to be damaged at all I ve also tried plugging the one into all of the ports on the back of the router in the event that one of them just bit the dust somehow but nothing changed Any thoughts on how I can either get my wired connection working again or what might be making the wireless connection so horrible For clarification on quot horrible quot I m not talking dial-up speeds but some sites either load slowly or not at all sites that load up just fine on every other device in the house - specifically cell phones and iPod an Xbox a Wii and a laptop My connection to Battle net for playing WoW Starcraft II Diablo III is also pretty lag-tastic My NIC is an onboard Realtek GR PCIe Gigabit LAN controller according to the motherboard manual In terms of anything that may be interfering with the wireless signal there s a metal support post and a metal I-beam a few feet from where the router currently sits though it was previously or so feet from both Other than being in close proximity to those the room is wide open I was told that water can interfere with a wireless signal and we do have a lot of ground water under around the house can anyone verify whether ground water can degrade the signal so much over such a relatively small space Hard drive partition issues Until the upgrade when the computer just wouldn t boot presumably because Windows couldn t handle dealing with such big hardware changes all at once I had Windows installed on a partition on a TB Western Digital drive Since I had to reinstall anyway I installed Windows to a partition on a smaller but faster TB Seagate drive Up until this afternoon when I installed Seagate Discwizard one of the partitions on the big drive was inaccessible showing up in disk management and a couple of rd-party hard drive utility partitioning programs as simply quot unallocated space quot Since this afternoon though that partition is now showing up as a completely separate hard drive in disk management AND as quot unallocated space quot on the drive it s actually a part of I m a little leery of just leaving things as they are and using that partition since it s showing up different ways Discwizard only shows that partition as a separate drive there is no quot unallocated space quot showing on the TB drive Is this something I sh... Read more

A:New hardware + Win7 installation = headaches

Update: Wired connection issue is fixed. I have to (sheepishly) admit that I completely forgot to install the router via the CD that came with it. The lousy wireless performance is still a problem, though, as well as the hard drive/partition issues.
 

http://www.techspot.com/community/topics/new-hardware-win7-installation-headaches.206345/
Relevancy 17.63%

I cloned my failing hard drive (a 160gb) to a new one (500gb). The installation seemed to go smoothly enough (it was my first time though) as it just required me to stay grounded and remove about 4-5 screws. When I loaded the PC up it wouldnt start the first time so I had to a Windows repair, which didn't seem to do anything except now it worked (it said it failed or something). I then had an issue with Windows 7 claiming to not be genuine although for one reason or another that stopped. Now my issue is that I am unable to access the additional memory of my new hard drive, I am able to access the cloned portion but not the rest (about 316gb). Any help would be appreciated, my PC is a Dell Latitude E6400 if that helps.
 

A:Inaccessible Memory on Cloned Hard Drive

Hello there,

It is absolutely normal not to see the rest of the free space in the moment. When you clone a drive you create the exact same image of old drive on the new one. This includes the size of the original HDD. However if you go to Disk Management ( type diskmgmt.msc in the search in the start menu and hit enter) you will see that you have one partition of 160GB and the rest of the space will be listed as unallocated. To use it you have two options ? you can create a second partition or you can extend the original one to take all the available space.

To create a new second partition just right-click on the unallocated space and select ?New Simple Volume?. This will starts a wizard to guide you through the rest of the process. First it will ask about the size of the partition. To use all the remaining space just type in the same value you have for Maximum disk space. Click Next.

Then you will get to choose and available drive letter to assign to this partition. Choose one and click Next.

Then you get to the Format partition window. You should choose ?Format volume with the following settings: ?. For the file system is best to leave NTFS. Allocation unit size as default. You can also put a label for the volume here. Then tick the box for ?Perform a Quick Format. ? Click Next. Then Click Finish. And you're done.

If at any point Windows pops up with the following message ?The operation selected will convert the disk to dynamic... are you sure you want to continue? ? click NO as this will most probably make your Windows unbootable and you will have to reinstall it.

If you want to extend the existing partition right-click on 160GB partition and select ?Extend Volume?. It will start the wizard and will only ask about how much space to add. Just select the maximum available space here and click Next, then click Finish. Once done your existing partition will be bigger and you'll be able to use all the space on your new HDD.

Hope that helps.
 

http://www.techspot.com/community/topics/inaccessible-memory-on-cloned-hard-drive.206835/
Relevancy 17.2%

My 320 GB Seagate external hard drive is detected but not showing up in my computer. What should I do?

In cmd> diskpart> list volume it does not show up. (screenshot attached)

In Device Manager it gets detected. (screenshot attached)

In disk management it shows up as 'unallocated'. If I initialize it, will I lose all data on the drive? It had 4 partitions. (screenshot attached)

In My Computer also it does not show up. (screenshot attached)
Even BIOS recognizes it.

What to do? I don't want to lose any data on the drive. If I initialize it in device manager will I lose data?

I was installing window XP on my computer, usually I remove the external drive but this time I did not. The external drive was shown as 4 drives in partition manager during installation. But the installation failed. The next time I was installing windows again, the external drive was shown as 1 single unknown or unrecognized drive. I'm not sure if it was unknown or unrecognized. I'm sure I didn't format it. So what I need to do now? I don't want to lose any data.
 

A:Seagate external hard drive not showing up in my computer. It is detected.

Yes, if you initialize it you will 'lose' everything. You will want to try something like [email protected] Recovery or maybe Easeus Partition Recovery.
 

http://www.techspot.com/community/topics/seagate-external-hard-drive-not-showing-up-in-my-computer-it-is-detected.205926/
Relevancy 22.36%

Hi,

if anyone can help ill be really thankful.
pc 1, 2 runnging win7 ultimate x64

1 adsl modem, 1 tp-link router, 2 computers (pc1, pc2).

ADSL(modem) - LAN1 - PC1 , LAN2 - Tp-link
Tp-link - LAN1 - PC2, WAN - ADSL(modem)

Everything is working, but computers cant see each other in HomeGroup.
Tried various methods but nothing work.

So my question is how to set HomeGroup for those 2 computers. Any suggestions?
Thank you
 

A:Win7 Homegroup problem

@Moirax . I can't answer your question, but your mention of Homegroup makes me ask what is it for? To avoid hijacking this thread,I'll PM you.
 

http://www.techspot.com/community/topics/win7-homegroup-problem.206524/
Relevancy 17.63%

My Buffalo HD which is actually a WD 500GB Hard drive. I opend it up and connected via SATA adapter but still the problem persists. I checked the drivers. Looked for clicking noise as in dead hard drive but none of those problems seems to be there. Also I tried formatting it but was unable to do so. Can anyone tell me whats the cause? It still may be the head problem but its not clicking as a dead hard drive does. It also seems to be spinning just fine but can't get to the root of the problem. Does anyone knows whats the problem?
 

A:Hard Drive Not Responding

Could be some issue on the PCB. Suppose if you were really dedicated to getting your data back you could buy the same drive off eBay or wherever and swap the boards. That may be more difficult to do since Buffalo may not have stuck to WD the whole time OR WD supplied a special series of drives to Buffalo. Check the model numbers to be sure before going that route.
 

http://www.techspot.com/community/topics/hard-drive-not-responding.206015/
Relevancy 17.63%

My old hard drive was a sata drive but it failed so I had an old ide 80gb barracuda 7200rpm drive that I wanted to install windows on but when I load the windows installation and goto custom it wont show my drive. My bios detects it its just windows . I tried using diskpart and even formating the drive to ntfs witha complete whip but still no luck .
 

A:Windows installation can't detect my ide hard drive?

Perhaps the hard drive's jumper setting is incorrect. Are there any other IDE devices connected on the same cable as the HDD?
 

http://www.techspot.com/community/topics/windows-installation-cant-detect-my-ide-hard-drive.192208/
Relevancy 17.63%

I have 2 new external hard discs do show on my computer .They are running but not showing in PC.What to do ? Thank you
 

A:External hard drives not showing up

Hello,

I'm not completely certain that I understood your situation. I wonder if it's possible to clarify the question? Otherwise Disk Management is a good place to start looking for a missing HDD.
If the HDD is brand new you might need to initialize it. This is needed if below the disk it says ?Not Initialized?. Right-click on the Disk that says ?Not Initialized? and click ?Initialize Disk?. Then you will have the option to choose between MBR and GPT. If the drive is more than 2 TB you should use GPT, if not you could use MBR as well. Once the Disk is listed as Basic and online right click the unallocated space and click create a ?New Simple Volume?. For the file system choose ?NTFS? if you want to use the HDD on Windows.

Hope that helps.
 

http://www.techspot.com/community/topics/external-hard-drives-not-showing-up.205942/
Relevancy 17.63%

So, when I built my PC I installed the OS on a HDD drive with the thoughts that I could later transfer it to SSD,

(did it before using hard drive cloning software to copy the OS drive to a new drive and then once working formatting the old drive.)

however when I started doing some reserch on cloneing software I noticed that windows 7 might not be cloneable (my past experiances are with XP) since there are mixed reviews on each bit of software out there both on Amazon and on the web. sevral report that windows 7 sees the clone as an unlicenced copy and refuses to boot. others say the clone drive misses it's boot file.

can some people advise me on if any of these facts are true or not?
 

A:Hard drive migration to SSD questions

Hi.
Cloning should work fine if you do it properly with windows 7. It's possible that windows can throw up a licensing issue, but very unlikely. In the event that it does, call Microsoft and they should be able to get it sorted out for you.

As for the bootability of the drive, cloning the drive's data does not necessarily make it bootable, but if you look online you'll see some cloning tutorials that include a section for rewriting the MBR on your SSD to make it the primary bootable drive in case it ends up not booting properly. This isn't hard to do and usually isn't a necessary step.

Also just keep in mind that simply cloning the SSD will probably result in an unaligned drive, so make sure that you get it properly aligned. Some cloning software has an aligning option built into the cloning process that you'll want to select.

So go for it and come back if you're having any issues.
 

http://www.techspot.com/community/topics/hard-drive-migration-to-ssd-questions.204382/
Relevancy 17.63%

Sorry I must not have sent the last post correctly I am new to this site So I will try again I was getting ready to upgrade to bigger hard drive or drives Before doing that I needed to take the old hard drives out to obtain some information off the labels I did so and while they where out I cleaned the Mounting slots a little better than using just No drives to SATA Power hard air Having done that I re-installed them both When I turned on the power button the button lit up and the fans were running But No Power to SATA hard drives it No Power to SATA hard drives does not seem that the hard drives are getting any power as I can t hear or feel any thing Plus the computer is not booting No Power to SATA hard drives I don t recall unplugging anything other than the two hard drives But I also notice that I have a short cable bundle with two white plugs with three pins and one empty pin hole on the other end a black connection with with five connector slots with one middle on blank That makes me think that I unplugged the power to the hard drive someplace along the ling As I have a wire bundle that has two SATA power connectors that are plugged in But their are three white female plugs marked P P and P which are not connected to anything in that wire bundle I don t know at this point if the power comes through that bundle from the power source Of if I do not have the power plugged into the lope I hope that somebody can help me figure this out and let me know if I burnt out the hard drives and have to start over with my recover disk reloading windows and going from there nbsp

A:No Power to SATA hard drives

How would I close this post out. Dumb me had the monitor plugged into an unused VGA port. It only took me two and a half days to figure that out. I wanted to let others know to check and see if they have everything plugged in where it should be. Including the VGA or other monitor cables.
 

http://www.techspot.com/community/topics/no-power-to-sata-hard-drives.204843/
Relevancy 17.63%

Hi, I have a Verbatim Store n' go ex hard drive which used to work perfectly with usb 3.0 and 2.0. A few weeks ago it stopped working with 2.0 and now not even with 3.0. When I plug it in the hard disk starts to rotate and lights up normally, but is never shown on the drive list. The computer doesn't even do the beep sound when a usb device is connected. I tried on 2 different pc's but they show no result.

Any kind of help is greatly appreciated
 

http://www.techspot.com/community/topics/external-hard-drive-failure.204788/
Relevancy 17.2%

Hi Frnds

I hav a Toshiba 1 TB external HDD. It was working fyn till today. Now it is not showing in My Computer or Disk Management. It does make the sound when I connect or disconnect it from the laptop. and the HDD light remains on.

Please advise how to fix this

Thanks
 

A:Toshiba external USB hard drive not detected in any laptop

Go under the Device Manager and uninstall all the USB Controllers then reboot your PC don't connect the 1 TB just yet. Make sure nothing is connect to those ports like a keyboard or mouse otherwise they'll lockup. Once rebooted Windows will rebuild the table for USB Controllers. Now you should be all set. Unless you have some sort of conflict with IRQ or Registry setting. There is a free app called USBDVIEW what you would do is disconnect from all non-disconnected USB devices that are stored on the PC these settings can cause all sort of issues.
 

http://www.techspot.com/community/topics/toshiba-external-usb-hard-drive-not-detected-in-any-laptop.173740/
Relevancy 17.63%

My bother had deleted my laptop partition files and folders when attempting to extend my C partition. All my stored partition movies were lost and could not be found in Recycle Bin. Do you know where these partition videos are? I really want to view these videos again. What can I do to rescue them? Thank you for any advice!
 

A:Delete hard drive partition data

Hey, Luminaton03!

Sorry to hear you are experiencing such an issue.
Your data is stilll there somewhere as long as you don't overwrite it. If you save new data, it would rewrite your previous files.
I did some research for you and I found a threat that you might find helpful:
http://answers.microsoft.com/en-us/...back-the/a003d747-b760-42a7-819b-0235e8ec6d2c

I really hope this works for you!
Good luck!

SuperSoph_WD
 

http://www.techspot.com/community/topics/delete-hard-drive-partition-data.204583/
Relevancy 18.92%

Hi friends I just recently upgraded my desktop with a bunch of what I thought was great parts (over $1000.00) to make my editing life more enjoyable, well I'm shocked to find out after testing both the same projects on both my laptop and newly upgraded desktop ,my laptop rendered the project faster than my big desktop, I'm just wondering why. I was expecting my desktop to render the project twice as fast!
Here are the specs on my laptop and desktop computers, can anyone explain to me why my laptop was faster. I used Corel VideoStudio ProX7 on both test.
Thanks
 

A:Desktop verses laptop

It shouldn't. Maybe there's something wrong with your hard drives. But there's no way the laptop should beat your desktop.
 

http://www.techspot.com/community/topics/desktop-verses-laptop.204561/
Relevancy 18.06%

So heres the story The computer has been working fine for several years Last night I decide to D850MV/D850EMV2 long Three desktop board beeps on Intel plug in my tv to the desktop via dvi It Three long beeps on Intel desktop board D850MV/D850EMV2 works fine and I dont have any problems I get home today and try and turn the computer Three long beeps on Intel desktop board D850MV/D850EMV2 on and I dont get any video signal to either the tv or the normal monitor Also long beeps accompany start up it sounds as though things boot but I dont get video or sound but it sounds like the hard drives click now and then like normal and the fans all run fine Ive swapped the first ram stick with one other and havent tried the rest yet and I have not changed the video card yet but plan to in the next minutes as of writing this Nothing looks physically damaged and I dont have any extra ram for this computer laying about since its a rambus so all I can do is swap the ram thats in it around and because I cant get video I cant run a test on the ram Suggestions or help would be appreciated Specifically what the long beep codes mean ive Three long beeps on Intel desktop board D850MV/D850EMV2 found a couple different versions of the code online and not sure which is correct Also what might have caused the problem plugging the tv in thats the only thing I did different unless someone was messing around with it without my knowledge or could it just be from years of wear or what nbsp

A:Three long beeps on Intel desktop board D850MV/D850EMV2

I think three beeps on Intel is a memory issue. At least that what it was when I had a stick of cheap RAM crap out on me.

I'd run Memtest and go from there

RAM can fail from a number of causes. Heat exposure, flaky transistor junctions, who knows. I seriously doubt plugging the TV in had anything to do with it.
You could go into BIOS to ascertain if the RAM voltage is set correctly. Over-volting is a DIMM killer.

You should be able to get documentation for that board directly off Intel's web site. Intel used to give BIOS beep codes ion the board/chipset manuals.

They also have hardware monitor software as a free download. Look up "Intel Desktop Utilities Lite".
 

http://www.techspot.com/community/topics/three-long-beeps-on-intel-desktop-board-d850mv-d850emv2.191367/
Relevancy 17.2%

I recently bought a external hard disk of WD (My Passport Ultra) 1TB. It was working fine untill now. Now there is a problem going on. I have used only 656GB of space but it now show that I have only 4GB of storage left. Earlier it was showing 257 GB of space left from 913GB but now it shows the above. I can't understand what is the problem. If anybody could guide me it would an immense help. Thank you.

Bodhiswattwa Tewari
[email address removed]
 

A:Problem With My Passport Ultra external hard disk by WD

Maybe @jobeard could help here. What OS are you running? OS X or Windows?
 

http://www.techspot.com/community/topics/problem-with-my-passport-ultra-external-hard-disk-by-wd.204228/
Relevancy 18.06%

Hi I have bought a laptop for my daughter its harddrive is 750gb but when I found it it is two hard drives.one initialled OS and the other data how is this supposed to work.regards Martin
 

A:Two hard drives

I know some manufactures have different ways they produce their setups, but most of the time its a partition and not another hard drive. What it does is store the System Backup / Restore on one partition so that you can reset the laptop to factory settings and the main "hard drive" (usually C prompt) is the partition you use on a daily basis. Unless you physically looked inside the laptop and saw 2 different hard drives, it should be just one hard drive that is split partitions. What is the make and model of this laptop? We can determine what setup you have with that information.
 

http://www.techspot.com/community/topics/two-hard-drives.204210/
Relevancy 17.63%

I'm trying to partition my hard drive, when I click shrink, it takes me to the shrinking window and it says:

Total size before shrink: 704749 MB
Size available to shrink: 7185 MB
Enter the amount of space to shrink: 7185 MB
Total size after shrink: 697564 MB

I don't understand how I have so much space, but I can only shrink it 7185. It is an NTFS.
Here's some screenshots
 

A:Why can't I partition my hard drive more?

Some files that are read only are preventing you from shrinking beyond a certain point while those files are open.

My suggestion would be to use partitioning software that is bootable. Boot to the disk and shrink your partition without windows running.

There are several freeware apps available to select from. The one I use is Partition Wizard Boot CD.
 

http://www.techspot.com/community/topics/why-cant-i-partition-my-hard-drive-more.204093/
Relevancy 17.63%

My hard doesn't show up anymore.when I plug it in I hear 2 beep sounds coming from it and then nothing.any one now what the problem might be.
 

A:WD external Hard drive

Probably an internal hardware failure on the drive. Hope you had your data backed up from that drive.
 

http://www.techspot.com/community/topics/wd-external-hard-drive.203951/
Relevancy 17.2%

Tried just about everything but I still can't seem to get my external hard drive to show up in my disk management or computer. It say it's installed and ready to use but I don't see it.. only in the device manager and in devices and printers I can see it.. but nowhere else.. I'm working with windows 7 upgraded from windows xp but has be downgraded which was originally windows vista I think.. A friend gave me a computer and I had it upgraded.. can any one help me get my computer and external hard drive straight. Thanks.
 

A:Don't see my external hard drive in disk management or on computer

Check this thread out: http://goo.gl/rxkBN
 

http://www.techspot.com/community/topics/dont-see-my-external-hard-drive-in-disk-management-or-on-computer.203836/
Relevancy 17.2%

The Seagate Momentus 5400.6 hard drive I'm using is from my old laptop it has 4 disks.
After I put it in the (IT-CEO IT-700) enclosure, and connect it to my new laptop it does not show up in 'My Cumputer' and 'Disk Management', but displays in the 'device and printer' section of control pannel.
I also can't eject the hard drive, even when I'm not doing anything to it, the (IT-CEO IT-700) enclusre's blue signal light just keeps flashing for a while then goes off for a sec, then resume flashing again.
My laptop also keeps trying to install the hard drive.

I tried reinstall the hard drive's driver, but that did not solve the problem.

Please Help.
 

A:External Hard drive not showing up in 'My Computer', and 'Disk Management'

Have you tried using different drive enclosure other than the IT-CEO IT-700?
 

http://www.techspot.com/community/topics/external-hard-drive-not-showing-up-in-my-computer-and-disk-management.201875/
Relevancy 17.63%

I have a Dell Precision T which I just purchased off of Ebay Recognized Possible Hard Formation, Second Not Drive Raid It came with gb of ram and gb hard drives installed In quot my computer quot it shows drive quot c quot but not the second drive This computer supports raid configurations but when I received it it had no operating system installed I installed windows ultimate bit This computer has quad core processors and I have been noticing a Possible Raid Formation, Second Hard Drive Not Recognized slower response time lately which leads me to believe it may be in one of the raid modes even though they are supposed to be faster most of the time Possible Raid Formation, Second Hard Drive Not Recognized I went into the bios and the setting it is on is to automatically detect raid configuration in the drives and if not detected the regular mode I read some information about raid setup and cannot find the software quot Intel Matrix Storage Console quot on the computer to help verify or change settings Could this be an extra program like drivers that are downloaded from the Dell website because they don t normally come with a regular windows install If someone is familiar with configuring raid formations could you please help me determine what my system is set on and how to set it properly I would be satisfied to not have raid active as I don t need that kind of constant backup My work is not that important I can back up important files in other ways nbsp

A:Possible Raid Formation, Second Hard Drive Not Recognized

What shows up in the Disk Manager vs the Device manager?
 

http://www.techspot.com/community/topics/possible-raid-formation-second-hard-drive-not-recognized.202015/
Relevancy 17.63%

My External hard drive wont open without format I try doing format it gets stuck I try opening computer > mange > disk management it wont open unless I take it out and gets stuck and gives me connecting to virtual disk service
please please help me! im freaking out I need this hard drive to work I need help
 

A:External hard drive

If you need this drive because there is data on it, formatting is the last thing you want to do.
 

http://www.techspot.com/community/topics/external-hard-drive.203628/
Relevancy 17.63%

Recently a hard drive named OS (X: ) (space inserted so it isn't posted as a smiley face) appeared in my computer. It seems to be identical in memory to my actual hard drive, but is actually empty. What exactly should be done about this?





 

A:Empty extra hard drive?

Not sure off hand but I'd open up Disk Management to see what it says there.
 

http://www.techspot.com/community/topics/empty-extra-hard-drive.203533/
Relevancy 18.92%

I have tried to fix a mates sony vaio's hdd issue. Re installed windows, and it boots fine from my pc. When I put it back into the laptop it doesn't boot. gives a blue screen with some writing on for a split second, then nothing - black screen....

Any ideas?
 

A:HDD will read in desktop but not laptop

Are both the same version of Windows? Win/7 & 8 don't like XP or Vista boot environments
 

http://www.techspot.com/community/topics/hdd-will-read-in-desktop-but-not-laptop.203466/
Relevancy 17.63%

Hello,

Old Dell computer running Windows XP that was never backed up and I am trying to recover files and photos. I get NTLDR is missing when I boot. I've used Testdisk/Photorec to try to recover my data but when going through the recovered data it seems to be all system files that I know nothing about. I used Ubuntu on the Dell to run Testdisk. I also hooked up the hard disk to my laptop with a hard disk adapter and got the same results.I also ran a NTLDR boot disk but ended up with the same NTLDR is missing message. I dont have a XP recovery disk. Anybody that has had this issue please help!
 

A:NTLDR is missing. Hard Drive Failure.

Trobles86 said:





I also hooked up the hard disk to my laptop with a hard disk adapter and got the same results.Click to expand...

If you have access to another PC or laptop then you can connect the hard drive in to that machine and get the files you wanted to recover from your hard drive in there.
 

http://www.techspot.com/community/topics/ntldr-is-missing-hard-drive-failure.203104/
Relevancy 22.79%

I finally bit the bullet and upgraded yesterday Before installing the new OS I installed g of ram gb sticks Got thru all the installation BS my goodness Microsoft eats up a from Upgraded XP to Win7 lot to memory with all those updates Any way I was checking out the specs on my systems on the My Computer page and it only shows that I have g of Ram The other problem is I have a gb but it s only showing that I have gb total I know you want my system info so I ll do Upgraded from XP to Win7 the best I can AMD Athlon tm X Dual Core Processor Ghz bit I m going to check out my memory sticks Maybe one of them isn t seated properly I have them side by side as it was shown in my MB book but was wondering if I should skip a slot Also is there something I need to do about my drivers I m really worried about my HD space I know before the guy who built my system had a partition put in That got wiped out when I tried to to a repair on my Windows XP and had to do a clean install When I got the system back up and running it showed all my HD space now I m barely showing a third of the space that should be there I m really at a lost nbsp

A:Upgraded from XP to Win7

Well since no one is answering, I'll get you up to date. I found my lost HD memory and got it all back, so I'm at full capacity there. As for my sticks of RAM, I just don't know. I removed one, but the system wouldn't boot. Then I put the other one in and the system still wouldn't boot. So I put them both back in and the system booted right up. I'm getting the feeling that I bought 2 2gb or ram and ended up with 2 1gb sticks. Also, I thought the system was suppose to recognize when you put new ram in. Mine didn't.
 

http://www.techspot.com/community/topics/upgraded-from-xp-to-win7.203160/
Relevancy 17.63%

Please help my segate external hard disk 500 gb not working all of the solutions are not working please any solution but not that solution of computer manage please help and replay fast

windows 7 (64)
 

A:Seagate external hard disk

Man... that sucks. If ALL solutions are not working you are screwed.

Please read the link in my signature and try again.
 

http://www.techspot.com/community/topics/seagate-external-hard-disk.203299/
Relevancy 17.2%

I am a beginner of hardware. I find two series of SSD to compare, 840 EVO and M500, because the specifications and the prices of them are approximate.

Both of them use SATA 3, so you need to compare with the read speed and the write speed, if you prefer faster one. The sequential read speed of 840 is 540MB/s, and the sequential write speed is 410MB/s. M500 is slower, but the performance of M500 is great as well, its Shock-resistant design makes it more durable than 840. The most important thing of SSD is the controller, 840 uses 3-core Samsung MDX controller, M500 uses Marvell?s latest controller, maybe the second one is better.

This is my poor review, how to compare them with more details, give me your advice.
 

A:The comparison of hard-state-drive, Samsung VS Micron

Read in-depth reviews such as this:
http://www.techspot.com/review/709-samsung-840-evo-ssd/
 

http://www.techspot.com/community/topics/the-comparison-of-hard-state-drive-samsung-vs-micron.202945/
Relevancy 19.35%

Looking to build a new computer with the maximum price of $2,000
I need:

At LEAST 16 GB RAM
At LEAST 500 GB SSD
Run any game smoothly
Windows 8+ compatibility
Intel, NO AMD, WHATSOEVER
nvidia graphics
Thanks for any recommendations.
 

A:New Gaming Desktop

I made this: http://pcpartpicker.com/p/3P7tG
 

http://www.techspot.com/community/topics/new-gaming-desktop.202647/
Relevancy 17.63%

I have a Western Death Disk Hard After Click of Digital Gig Drive which experienced the Click Of Death Hard Disk After Click of Death while accessing the drive It took out the last gig of the drive The first half on Check Disk works perfectly But when check disk attempted to go through the section where the COD hit it jammed the program and stopped saying it wasn t able to repair the area The drive was used for music storage in an automation system I partitioned the damaged area off so it cannot be used or accessed When the drive was connected to the last system I had it in the system s SMART said to quot back up all data that failure was eminent quot After partitioning off the ripped up area of the platters is it possible to use this drive as a slave only I may be coming off sounding like a mad scientist with this thought But if it s possible at all to continue using this drive I d love to use it for storage only No OS and keep the partitioned area marked off so it s no longer accessed what so ever I m I barking up the wrong tree with this thing or is it still able to work All data which was on it before the damaged area was saved easily The good section still works and saves data without issue Just curious about this If it works I ll use it if not I ll replace it and use it for a paperweight nbsp

A:Hard Disk After Click of Death

Ray G said:





I partitioned the damaged area off so it cannot be used or accessed. When the drive was connected to the last system I had it in, the system's SMART said to "back up all data that failure was eminent".Click to expand...

My experience with drives has been exactly as the Smart warning. Once the drive starts to fail, it will not stop deteriorating. I would say the drive is history and should not be trusted further, not even as a slave.
 

http://www.techspot.com/community/topics/hard-disk-after-click-of-death.202992/
Relevancy 19.35%

I need help in assembling a desktop, the specs are core i3, 4GB RAM, 500GB HDD. please help me with other components and its exact specs. thanks
 

A:Assembling a desktop PC

http://www.techspot.com/community/topics/how-to-post-all-pc-building-queries.119618/
 

http://www.techspot.com/community/topics/assembling-a-desktop-pc.202912/
Relevancy 17.63%

Hello all!!!! My name is John. I am trying to find some help with an issue that arose after I installed a new hard drive in my computer. I started getting a message that stated:

C:\Users\Owner\App Data\Local\Conduit\API Support\API Support.dll

Anyone know how I can repair this? I saved an image of my system before installing the new hard drive and then just downloaded the image to the new hard drive. HELP!!! please!!
 

A:Installed new hard drive

You might just need to run some registry cleaners to fix and remove those corrupt registry keys.
 

http://www.techspot.com/community/topics/installed-new-hard-drive.201991/
Relevancy 17.63%

My computer recognizes that the hard drive is there as local disk E but wont actually load. I can get it to load on my tv but it wont play my movies. Please help it has a lot of important things on there,
 

A:External Hard drive not loading

You could try running chkdsk /f in command prompt to check and fix errors on your drive.
 

http://www.techspot.com/community/topics/external-hard-drive-not-loading.202166/
Relevancy 17.2%

I have had a look round the posts but nothing I try stops the internal drive getting accessed.
I have unchecked the CD autorun using TweakUI (this worked for someone else)
I have temp disabled AVG along with BoostSpeed and Team Viewer
The only process running apart from sys idle is svchost.exe (1%)

I hope someone out there manages to work their magic as they did the last time I posted here!
Thanks
 

A:Hard drive light flashing with nearly no processes running

Sounds like the System Index service is running.

When you find that happening, disconnect from the Internet to be sure MS Update is not running or something on your system is phoning home to be sure.

To see all Internet connections from your PC, grab a copy of CurrPorts - - runas admin and you will see everything. Click on the column heading Remote Host Name to get active connections at the top if the list. The menu Options is used to customize the display; here's my list

display Listen, Established, TCP, UDP, IPv6,

display port in The Address,

sort on refresh,
Ask Before Any Action
That last one is interesting; running as admin, you can Close a port or Kill the application with that port.

CurrPorts identifies all ports on the pc (mine number 112 as I write) and if I select all ports with a Remote Address, I see I have 20 connections.

btw: Remote Addresses shown as 127.0.0.1:nnn are local services (like a proxy or AV service), so out of the 20, only two are actually remote - - both HTTP browser connections.
 

http://www.techspot.com/community/topics/hard-drive-light-flashing-with-nearly-no-processes-running.202265/
Relevancy 17.63%

I have to say I am a little worried about my hard drive. Often I bought it for the purpose to protect my game videos, and some program files. For a long time, it behaved rightly with my HP windows 7 desktop when directly used. Sometimes ago I decided to let this old PC alone and bought a Macbook pro. The latter has no such a SATA interface for me to input the data from this drive. For the convenience, I borrowed this SATA dock from my brother . ( I have to admit previously I once use another dock to exchange the data . )

My mac just could not recognize my drive as a normal one. I am not sure where the problem lies in. The key is that other drives have no similar issue with this dock. I wonder if anything happen before in the process I handle the data with another dock.

Grateful for any advice.
 

A:Previous WD hard drive 500GB could not be recognized as it always

Yeah. At present I have no such another one to have a try. I will turn to my friend see if any gadget he has to test my drive.
 

http://www.techspot.com/community/topics/previous-wd-hard-drive-500gb-could-not-be-recognized-as-it-always.201163/
Relevancy 17.63%

Okay not really very good at this but my laptop stopped working so I took hd out and connected it to anotherlaptop through usb lead it appears in my disk management (although it shows up grey instead of black or blue if that makes sense to anyone) but it wont show in my computer I have a load od family photos on this drive and would really love some help and will send out good karma to all who try to help me many thanks in advance
 

A:Trying to recover data from crashed hard drive

Hi techmichellenot. When you say it stopped working,is there anything on the screen when you power up, or any indication that the system passed it's POST procedure (Power On Self Test), usually indicated by a beep before Windows itself tries to boot up?. Any error messages seen?. Sounds like you put the drive in an external case that can connect via USB. If there is indeed a problem with the disk drive and it's not a physical problem with the drive (maybe a corrupted Windows boot file,etc),your system may have a Recovery procedure that will reinstall your OS without erasing your data files (called a non destructive OS reinstall) as opposed to a destructive which erases everything and reinstalls the OS. I would check your documentation to see if your laptop has such a procedure.
 

http://www.techspot.com/community/topics/trying-to-recover-data-from-crashed-hard-drive.189487/
Relevancy 17.63%

Hi All,

I have WD 1 TB passport, and all its operations are very very slow.
I cant use it at all. I have all the important documents in it.
Please someone help me out here.

Regards,
Sanoop.
 

A:WD hard disk all operations very slow

The only thing I can really recommend is to defragment the external HDD using a program such as Defraggler.

If that doesnt help, you may have a virus on the HDD, in that case, I would recommend posting in the malware forums.
 

http://www.techspot.com/community/topics/wd-hard-disk-all-operations-very-slow.201315/
Relevancy 18.92%

After dismantling this pc ,
I'm left with the Monitor & decided to see if it would work on my Vista Vaio laptop & it does.
BUT, I don't need the same thing on both screens (laptop too) & I ignorantly ignored the instrctions on how to make it external monitor only. The external monitor is a Compaq Q1859. I will bookmark this thread & will also need to know how to reverse it if need be down the road, thank you.
 

A:Compaq Desktop monitor on a laptop

After messing with the settings in the Control Panel>Display setting, I gave up & put the monitor back in the closet where it'll sit until someone in here helps or I find out how to do it.
 

http://www.techspot.com/community/topics/compaq-desktop-monitor-on-a-laptop.201233/
Relevancy 18.06%

Hey Guys. I would like to upgrade my computer. I've got a 40 GB HDD right now. Is it possible to add another 80 GB HDD to my computer? If so, how? Could I use both the HDDs?

Another question. I've got 512 MB RAM right now. And they are of PC2700 type. Is it possible to remove them and add PC3200 type RAM? And while inserting RAM, is it true that we should put it in sets of two? I mean if I want 1 GB RAM, could I put 2x 256 MB and one 512MB or should I put only 4x 256 MB?

Thanks
Amal
 

A:How to add new hard disk and RAM?

A general rule of thumb but not an absolute is, you can put in better RAM. RAM will simply down-clock to the highest settings the motherboard supports. But like I said though, it is not an absolute, as you can still find incompatible RAM.



amalsk said:





Hey Guys. I would like to upgrade my computer. I've got a 40 GB HDD right now. Is it possible to add another 80 GB HDD to my computer? If so, how? Could I use both the HDDs?Click to expand...

Before we can answer with a direct answer, we need to know if you are working with IDE and/or SATA ports. I'm certain your machine is IDE, but I'm not certain it has free IDE and/or SATA ports. Short answer is yes you can, it all depends on the availability of port and finding a drive that will connect.



amalsk said:





Another question. I've got 512 MB RAM right now. And they are of PC2700 type. Is it possible to remove them and add PC3200 type RAM? And while inserting RAM, is it true that we should put it in sets of two? I mean if I want 1 GB RAM, could I put 2x 256 MB and one 512MB or should I put only 4x 256 MB?Click to expand...

Your machine likely doesn't support Dual Channel Mode. I'm almost positive DDR memory doesn't support Dual Channel, but I'm not going to swear to it. If that is the case then it wouldn't really matter as long as the RAM is compatible with your system. The best way is to stay with RAM you know is compatible or is recommended for your board. Dual Channel though is the main reason, you would want matched RAM modules. With all that said, I personally always like keeping the same speed modules regardless of whether they needed to be matched.
 

http://www.techspot.com/community/topics/how-to-add-new-hard-disk-and-ram.201047/
Relevancy 53.32%

I have an ASUS MeMO Pad 7 inch non HD keep that in mind total different situation. But I cannot Factory Hard Reset it by using any normal button combinations or reset button. I have done a lot of research but have come up empty. The reasoning behind the need to perform factory reset is the number pin to log in was forgotten. Yea, yea I know I should not use it but it happened so non the less any ideas?

Vedrneronomous
 

A:Asus MeMo Pad 7 Inch non-HD will not factory reset

So you can't get to the factory reset menu? Holding the power button will turn the tablet off right?
This might help:

 

http://www.techspot.com/community/topics/asus-memo-pad-7-inch-non-hd-will-not-factory-reset.200868/
Relevancy 17.63%

Hi all I have custom built pc and in last month now and then it switches off I believed it to be a faulty psu but now ive notice blue screen couple of times I looked it up and it points to faulty hard drive .also on restart I get few chkdsk .so I thought ok I got spare harddrive ill clone main one on to that and use that but when I plug it in it shows up but making a weird noise, also secured by bit lock,, I put password in and then it dissapears with error something like cannot be specified ...does this mean both hard drives have failed or could it still be psu maybe not giving enough power..thanks in advance.. any more info please ask
 

A:Hard drive fail

A noise coming from the hard drive you replace is faulty,,, it's indicates mechanical failure..you better buy new one...
 

http://www.techspot.com/community/topics/hard-drive-fail.200737/
Relevancy 22.36%

I bought a Samsung 840 SSD (120GB) for my gigabyte GA-770T-USB3 motherboard. I am unable to install win 7 64bit on it. It is a SATA SSD.

I have tried ACHD mode in the BIOS, I have tried IDE mode. The drive works as I have tested it as an external drive on other computers.

I bought the drive specifically to be used as a primary drive.

My regular hard drives work fine on the motherboard.
 

A:Unable to install SSD on Win7 x64 system

Well, first of all, your motherboard only supports 3GB/s and the 840 is a 6GB/s drive. Just by that you won't really get your moneys worth. And how so are you unable to install? Also can you please list your system specs?
 

http://www.techspot.com/community/topics/unable-to-install-ssd-on-win7-x64-system.190141/
Relevancy 17.63%

HELP!!!

I have a 500gb external hard drive which, up until a few days ago, was working absolutely fine.

When I would plug it in to my laptop the device was found under 'my computer'.but would not open. Instead when I tried to open it my computer froze and the 'not responding' message was shown, resulting in a forced close of my computer. Now when I attach the hard drive and open 'my computer' the hard drive does not show at all, but 'my computer' still shows the message 'not responding', resulting in a forced close.

I've been on to a couple of forums already and tried the route of right clicking 'my computer', 'manage' and 'disk management'; but the hard drive does not appear there.

I'm at a total loss what to do and would massively appreciate your help as I have backed up company data on to this hard drive.

Thank you in advance!
 

A:External hard drive not showing in My Computer

Hey pcrquals. I would try the drive in another pc to narrow down where the problem is, a problem with the drive itself, or a problem with the pc recognizing the drive, which might be a problem with the USB port(s) or with the USB drivers. Does another USB device like a flashdrive work when plugged into the same port?
 

http://www.techspot.com/community/topics/external-hard-drive-not-showing-in-my-computer.191206/
Relevancy 22.36%

Hi All Right problem As stated above my laptop does not recognize my external The drive spins up inside the enclosure the power led lights up but it does not show I have been a Field Support Engineer Tier III for many years and following that a Technical Analyst all within the IT field and this one on not hdd recognize Win7 does external Compaq6710b has me totally STUMPED Steps followed Checked Win7 on Compaq6710b does not recognize external hdd Compmgmt - gt DrvMgmt drive does not show same as DevMgmt msc - gt Drvmgmt Went into CMD prompt - gt Diskpart - gt list disk only picks up my primary internal I e disk I have moved the hdd from one USB port to another - still no difference I have tried disconnecting and reconnecting it multiple times - no avail Tried rebooting - no avail Tried rebooting both with without the external connected - no change Connected the external to multiple other machines - it picks up on every single one of them Run RSOP machine is on a domain but there are as confirmed by domain admins no restriction policies in place seeing that my other smaller in capacity flash drives all pick up and show Ran a full malware scan - clean with the following in turn not at the same time also not installed simultaneously MBAM MSSE AVAST ESET - All came back clean Ran CCleaner getting desperate now and after all cleaning and clearing etc sorted rebooted machine - still no change Checked if the drive shows in BIOS upon restart - it does Just to slam dunk point above - checked if the drive shows as a possible boot media upon reboot - it does Only thing left to do is to try any Linux Unix based boot GUIs to see if it shows in thee as wel apps in the line of Knoppix to name but one Oh yeah also accessed the Advanced Properties af all the available USB Root Hubs and ensured that the computer is not allowed to turn off these devices in order to save power I have also downloaded EVERY POSSIBLE LATEST DRIVER from HP s site so everything THERE is up to date all drivers and firmwares up to date Flashed the CMOS Updated the BIOS as well If I connect any of my flash drives or any other mobile device tablet phone usb modem with micro sd card installed configured as storage to the laptop they all get recognized and are accessible but NOT my external even though every single other machine I have connected it to picks it up As per all my points above please do not suggest the following A Use of various or random drive checking tools - they won t work as the O S does not recognize the drive B Right click quot My Computer quot anything starting with that will be a waste as I have already gone through all those steps by means of accessing all relevant interfaces via cmd line interface - I cannot see the drive so I can also NOT change it s drive letter just read another post on another forum where the OP requests assistance as he cannot access his drive at all kind of similar to my scenario and the suggestions on there drove me out the walls - people missing obvious things and making suggestions which would be declared useless by using some common sense I am going to try and upload prt shots of both diskpart cmd result and compmgmt msc results okay failure with bmp jpg and png HA loaded successfully Any assistance would be appreciated Oh yeah it is a USB powered quot external hdd not the quot type which requires external power nbsp

A:Win7 on Compaq6710b does not recognize external hdd

Have you tried your Ext Hard drive to be connected to any other PC or Laptop. If the drive is still not recognized consult an expert for this.
 

http://www.techspot.com/community/topics/win7-on-compaq6710b-does-not-recognize-external-hdd.200463/
Relevancy 17.63%

I have an external WD hard drive, I accidently removed the network file and folder sharing componet. Now when I go to access my hard drive it tells me that access is denied. I dont want to lose the data. Is there a way to restore this opion and gain access? PLease help. I oringially was trying to limit access to this hard drive.
 

A:WD external hard drive

Google How to Take Ownership for the instructions your version of Windows. Try taking ownership of files/folders on the drive
 

http://www.techspot.com/community/topics/wd-external-hard-drive.200328/
Relevancy 17.63%

You saved an old hard drive (or three) from previous computers and now you?d like to get at the data on them. Is there an easy way to access the data without cracking open your current computer and mounting the hard drives inside?

Read more
 

A:How to Get Data Off an Old Hard Drive (Without Putting It in a PC)

very good. I was trying to explain this to someone. Now I think I will just send then the Web Page.
 

http://www.techspot.com/community/topics/how-to-get-data-off-an-old-hard-drive-without-putting-it-in-a-pc.200129/
Relevancy 17.2%

I've been having this problem for a few months now. I recently built my own computer, having been on a lap top for a couple of years, and found my old external hard drive. I plugged it in to the new computer, and it said something about needing to be formatted, which I promptly did due to nothing of importance being on it. I went to sleep, and woke up to see that it couldn't be formatted.

This is where my issue begins. It no longer appears in Computer, or Disk Management. Disk Management won't even load if I have the drive plugged in. There seems to be no way at all to format the drive, since Computer, and Disk Management both don't load when the drive is plugged in. Any help?
 

A:External Hard Drive is Not Recognized in Computer or Disk Management

I have a similar problem. I have an old external hard drive and it wont showed up or open under my computer or disk management. I tried to open it under disk management but there is no way to be found. The files F, G, H, etc are empty. I really appreciate an extra help here since I am not a computer expert. Thank you!!!!
 

http://www.techspot.com/community/topics/external-hard-drive-is-not-recognized-in-computer-or-disk-management.191966/
Relevancy 18.49%

This is For a Parts Buying Desktop Building Gaming my first time to build a computer so I want to know if Buying Parts For Building a Gaming Desktop the parts I m getting are good with each other and could say run battlefield and assassins creed on high or ultra and run a skyrim modded to hell with a good enb Here s the parts I Buying Parts For Building a Gaming Desktop have selected so far Case http www newegg com Product Produc E Monitor http www newegg com Product Produc Buying Parts For Building a Gaming Desktop E DVD Drive http www newegg com Product Produc E Hard Drive http www newegg com Product Produc E Network Adapter http www newegg com Product Produc E Graphics Card http www newegg com Product Produc E Sound Card http www newegg com Product Produc E Power Supply http www newegg com Product Produc E Keyboard http www newegg com Product Produc E Memory http www newegg com Product Produc E Motherboard http www newegg com Product Produc E CPU http www newegg com Product Produc E CPU Cooler http www newegg com Product Produc E Int SSD http www newegg com Product Produc E Thermal Compound http www newegg com Product Produc E Desk Decoration http www newegg com Product Produc SIA Y can t resist the Tali man And also I m a little confused on the SSD and HDD deal I was customizing a pc on maingear to just get some bearings on what I needed and they had a gb SSD as a caching drive and a T HDD as the main drive But I also heard that you want SSD as your main because its faster What is a caching drive and what difference will it make nbsp

A:Buying Parts For Building a Gaming Desktop

Don't get Velociraptor. Get a 1TB WD Black instead.
Caching drive: uses the HDD for files, but stores commonly-accessed stuff on the SSD.
For best performance, get an SSD and use it for OS and core productivity programs. Then store games/media/documents on the HDD.
Don't need additional LAN card.
Why are you buying an additional audio card? It's nice, but your mobo comes with a decent one to begin with.
It's probably cheaper to get TWO dual-channel 2x 8GB RAM kits, instead of the quad-channel one.
Maybe spend a little more on CPU cooler, since you're getting the top GPU too. May I suggest a ~$100 all-in-one water cooling kit.
120GB SSDs are better value these days.

 

http://www.techspot.com/community/topics/buying-parts-for-building-a-gaming-desktop.199552/
Relevancy 22.36%

Hello I have been experiencing with Video 7870 Win7 in Stuttering 64 an ongoing issue with video stuttering when using vsync and screen tearing when not of course in certain games Here are my specs Desktop PC OS Win -bit Intel Core i Ghz Motherboard ASRock Z Extreme GSkill Ripjaws GB DDR RAM AMD Radeon HD GB driver CCC -display setup monitors Video Stuttering with 7870 in Win7 64 x x Video Stuttering with 7870 in Win7 64 and one TV Video Stuttering with 7870 in Win7 64 at x HD Samsung SSD PRO GB HD OCZ Agility SSD GB HD Seagate HDD TB HD WD HDD GB This issue is present throughout all games and videos to varying degrees It becomes apparent when any smooth movement is supposed to occur such as camera panning or forward movement in fps games for example In certain games it is barely noticeable such as Borderlands however games Trine or Dead Island are virtually unplayable due to the amount of stutter when moving In other games I experience tearing unless forcing vsync with triple buffering with D D overrider I have tried changing the vsync settings in the individual games as well with no change I have tried a number of solutions recommended from various boards such as reinstalling installing older drivers I am using an ATI radeon HD and have downloaded and removed installed just about every driver version I could get my hands on I have also been lucky enough to have access to a great deal of spare parts As such I have swapped the following components with known-good ones with no result - Power supply - CPU - Motherboard - Hard drive SSD - full reformat as well The previous graphics card a also experienced the exact same problems initially I replaced this card in an attempt to solve the stutter issue but it remained exactly the same I have run memtest and had no errors I have run certain problem games off of a different hard drive and on different monitors of my setup and produced the same result Computer has been fully scanned cleaned of malware etc Running Malwarebytes CCleaner and MSE I m at the end of my rope here Not sure what else to do Seems like this is a tricky issue none of the solutions I have found while searching has worked but I m hoping I missed something crucial Any help suggestions would be appreciated If you need any more information please let me know Thanks for your time nbsp

A:Video Stuttering with 7870 in Win7 64

In-game Vsync sucks for many games, the problem being some games tend to be biased towards one company and that causes the other company Graphics card to run poorly in it.

Try downloading Radeon Pro, its a custom tool that helps for games like that on AMD cards that run into issues with Vsync. Once installed, all you do is add the games your having problems with, go to the options surrounding the games sync, and set it to use dynamic Vsync with the refresh rate of your monitor (You can also add your monitors refresh in).
 

http://www.techspot.com/community/topics/video-stuttering-with-7870-in-win7-64.199248/
Relevancy 17.2%

How serious is this? I'm running on a Dell laptop with a Intel(R) ICH9M-E/M SATA AHCI Controller.

It is saying that I should back up all of my important files because of possible hard drive failure.

PLEASE HELP? I don't know how to fix this because I don't know what it means.
 

A:Hard drive is reporting a Smart Event error message

It telling you your hard drive is on its way out. You can try running a check disk and see if that helps. But to be on the safe side you should back up your personal files.
 

http://www.techspot.com/community/topics/hard-drive-is-reporting-a-smart-event-error-message.199432/
Relevancy 15.48%

I have an external hard disk of Samsung 650GB which got damaged when I was transferring some files to my pc through it. Now when I connect to any PC or Laptop it shows the safely remove icon but there is no letter assigned to it and also doesn't show up in My Computer though it can be seen in Disk Management.

I tried Mini Tool Partition Wizard but when I create a new partition it stops at 90%. I tried wiping out the partition but to no avail.

Is there any solution for it??? Please help.
 

A:Creating A New Partition Or Wiping A Partition On External Hard Disk Stuck

I would check the manufacturers site for a windows utility to low level format it. If you cannot find a utility to do that on manufacturer's site, then try this: http://hddguru.com/software/HDD-LLF-Low-Level-Format-Tool/ to wipe the drive. WARNING!! this will destroy all data on the selected hard drive!! be very careful when selecting a drive to wipe that you don't inadvertently select the wrong disk. After a low level format, unplug the drive, plug back in, windows should detect as a new, virgin, drive and it'll prompt you to format it. Format it and hopefully everything will be fine from here on out for you.

Post back, Hope this helps!!
 

http://www.techspot.com/community/topics/creating-a-new-partition-or-wiping-a-partition-on-external-hard-disk-stuck.198811/
Relevancy 16.77%

Hello all I made a post regarding the performance failing of one of my supply power affect hard performance? drive/computer Faulty hard drives The conclusion we came to has unfortunately not resolved my problem and I am beginning to think my Power Supply may be the culprit Faulty power supply affect hard drive/computer performance? ------------------------------------------------------------------------------------------------------ Before I go into details here is my current Hardware Q GHZ GIGABYTE EP -DS R GB PC mhz x gb x gb Nvidia GTX mb requires x pin power adapters Asus Xonar soundcard requires floppy power adapters Windows x Jeantech W PSU modular PSU PCI-E nodes and nodes for other devices gb HDD operating system tb HDD data tb HDD data tb HDD data - added recently ------------------------------------------------------------------------------------------------------ My original problem in brief Upon accessing certain files in one of my TB drives I hear a distictive quot click lockup halt quot sound and then the entire system crashes first the drive will become inaccessible then windows explorer will crash followed by the mouse and eventually a BSOD after a minute ------------------------------------------------------------------------------------------------------ I bought a new TB a month ago to replace what then I thought was a failing TB drive Since the problems have become quot random quot and happen across all four drives tb tb gb tb I am now considering my PSU the culprit Jeantech Absolute w It seems logical to me Sometimes while performing tasks which put stress on several HDD s at the same time my computer is quot choking quot running as fast smooth as it should but with sudden freezes with those HDD quot click - stop - restart quot sounds Booting into windows is failing from time to time freezes on the quot starting windows quot screen or DISK BOOT FAILURE Insert system disk The PSU is modular - could certain quot plugs quot in my PSU are faulty I haven t tested this extensively but in some cases when the computer is not starting up at all using different power ribbon cable combinations seems to help Also I had to remove my DVD drive completely when I first installed the new TB I bought and I don t think my computer will start at all with it plugged in anymore so my PSU MUST be having a hard time coping with all the components If it is of any relevance I use an Nvidia GTX which requires x PCI-E pin power connections hard drives power is supplied via THREE modular ribbon power cables - two HDD s share power from the same ribbon cable lastly worth noting I use an asus Xonar sound card requires floppy power connector several symptoms suggest the PSU any thoughts nbsp

A:Faulty power supply affect hard drive/computer performance?

a 1000Watt shouldn't have any problem coping with the components that you have, i would recommend that u borrow a power supply from a friend and try it out on your computer, maybe the power supply is old and is not supplying proper voltages on all the rails....
 

http://www.techspot.com/community/topics/faulty-power-supply-affect-hard-drive-computer-performance.160966/
Relevancy 17.63%

Sir, my 500 GB Portable Seagate Hard drive is not being detected anymore in My Computer but it shows up id Disk Management. When I start disk management, it tries to initialize my portable drive but reports an I/O error. Also it shows my hard drive as an unallocated and unknown device. Is there any way I can get my disk back to use without losing my datas in it?
 

A:Hard drive not detected

Not very likely, at least not easily. Try it with another computer before you do anything further. Also try a different USB cable.

If those both fail, you might have some luck breaking open the case and getting at the drive itself and then placing that in an external dock..
 

http://www.techspot.com/community/topics/hard-drive-not-detected.199143/
Relevancy 17.63%

Is this the right Forum I have an older Compaq nc with a failing Fujitsu G HD that I decided to replace with a SSD PATA IDE drive Transcend TS GSD GB IDE Hardware Agere Systems AC Modem Broadcom NetXtreme Gigabit Ethernet Intel R Ultra ATA Storage Controler - CA HL-DT-ST RW DVD GCC- N DVD Drive ATI MOBILITY RADEON Series Display Adapter Intel R PRO Wireless BG Network Connection O Micro OZ M MemoryCardBus Controller Intel R Pentium R M processor GHz Started machine with OS recovery disk to load windows XP Loaded SP and all drivers Computer seemed SSD Hard Drive installed OK at first Then every time it is started up Windows loads up SSD Hard Drive installed to the background and stalls It takes another minutes or so to get the task bar and systray Also after a minute or so a window opens to tell me that a driver for some hardware has successfully loaded but the list of the hardware is blank Then the CPU maxes out the fan starts and the machine slows way down When I look at processes in Task Manager there is a svchost that is using of the CPU cycles When I kill this svchost process the machine runs much more in line with what I expected What do I do to fix it I need for this computer to run with the SSD drive nbsp

A:SSD Hard Drive installed

Is the SSD seen by the bios? The OS recovery disk is in a CD drive?
 

http://www.techspot.com/community/topics/ssd-hard-drive-installed.198946/
Relevancy 17.63%

Hi all,

My laptop's hard drive has been getting worse and worse in the past 2 months, eg. freezing for up to an hour at a time, heating up to painful temperatures until it overheats and crashes. But today she finally died and is completely unable to start.

A systems diagnostic gave error 2000-146, which apparently means hard drive failure. But everything's already backed up and safe, so I'm quite happy to just replace it.

But... I don't know how on earth I would go about doing that, or what I should be looking for when buying a new laptop hard drive, ie. what the difference is between a desktop HD and a laptop one.

So... Any advice?
 

A:Replacing a laptop hard drive

Hey Partian Shot. A desktop drive is bigger and will generally have greater capacity. What is the make and model number of your laptop?. Do you have the Windows OS on a disk?
 

http://www.techspot.com/community/topics/replacing-a-laptop-hard-drive.198680/
Relevancy 18.92%

Would it be possible to use a dell poweredge 1850 as a desktop computer?
 

A:Using Dell Poweredge 1850 as desktop?

Its a computer so yea you can, you can install a normal windows version on it and run it as a basic computer. I had a family member who bought a cheap server from dell and did the exact same thing just because it was cheaper at the moment than the desktop options (It was a pretty low end machine).
 

http://www.techspot.com/community/topics/using-dell-poweredge-1850-as-desktop.198620/
Relevancy 17.63%

I have 500GB hard drive, down to 220 atm. Anyways, I notice sometimes it will read 190GB, but when I go to download something or whatever, or if a day or two pass, it goes back to 220GB. Do my computer needs to take hard drive space to do something? anyway to fix this?

I am picking up a second hard drive soon 1tb , but was curious about this issue .
 

http://www.techspot.com/community/topics/hard-drive-disappearing.198606/
Relevancy 22.36%

I reinstalled Windows 7 (64bit) after moving to an SSD. Now, for some mysterious reason, I can no longer read UDF format discs (all Blueray and some DVD's are UDF).

Microsoft's Knowledge Base posts a "hotfix", but it didn't work.

I searched online and lots of people seem to have this same problem, but no one has a fix.

How is it I can WRITE udf discs but not READ them? What a pain.

(Note: I can read the discs in XP and Linux, just not Win7. Copying the discs to the HDD every time I want to read them is not a long-term solution. And I can't copy commercial BD discs anyway.)
 

A:Can't read UDF format discs (Win7)

http://support.microsoft.com/kb/321640 is for XP, but does contain some useful information and possible work-rounds. At a guess, I would expect MS to address whatever they have done wrong before too long. In the meantime, an update of the Win7 DVD driver (and/or firmware) for your actual hardware might be available. Try the website of your DVD manufacturer.

At worst, if there is no software solution within a couple of months, you might have to consider replacing the drive, at least you can return a new drive if it fails you too.
 

http://www.techspot.com/community/topics/cant-read-udf-format-discs-win7.198203/
Relevancy 17.63%

I bought a hard disk around 3 months ago. While watching a video today, it stopped working. It is not neing shown in My Computer or in Disk Management. But it appears in Devices and Printers.
Please help as there was some important stuff in it.
 

http://www.techspot.com/community/topics/hard-disk-not-being-detected.198069/
Relevancy 17.63%

Hey guys I ve recently installed a new hard drive on my desktop PC It s a GB quot drive that I removed off of a new laptop I got The drive works great BUT ever since I installed it I get a really annoying drive, hard boot new get message Installed on message every time I boot my machine It s some sort of copyright disclaimer It says the brand of the HDD Hitachi and lists the copyright of the disk management system or something like that It says copyright jmicron com and then quot Hit enter to continue quot The message is displayed maybe for seconds and it disappears on its own so no need to press enter Pressing enter will get rid of it faster So yes Installed new hard drive, get message on boot it s not an error but it s annoying and it adds to Installed new hard drive, get message on boot my boot time I m assuming the exact brand and model of the HDD isn t relevant nor is it the message but if it is let me know and I ll post that information I m not near my PC at the moment Is there an option in the BIOS or msconfig I Installed new hard drive, get message on boot could change to get rid of this Intel Core i GHz GB DDR RAM Mhz GB Samsung SSD Main drive additional HDDs GB GB and GB ATI Radeon HD GB W Power Supply W nbsp

A:Installed new hard drive, get message on boot

A little help with this, please? I'm baffled, I'm no computer newbie and I've installed many-a hard drives before, but I had never gotten this message after installation. The exact model of the hard drive is:

Hitachi HTS547575A9E384

This is a picture of the message:
 

http://www.techspot.com/community/topics/installed-new-hard-drive-get-message-on-boot.197890/
Relevancy 17.63%

Hi all I have a 750gb seagate external hard drive , and the usb port bit broke on it so ive taken the hard drive out the casing . just wanted to know is this a 3.5" .as I bought new one so thinking of selling this one on ebay or using it for my pc. any more info needed please reply thanks
 

A:External hard drive broken

Anyone please ?
 

http://www.techspot.com/community/topics/external-hard-drive-broken.197512/