Windows Support Forum

DVD R/RW Drive Firmware update help

Q: DVD R/RW Drive Firmware update help

i have been trying to update the driver firmware for my pioneer dvd writer and im having a problem running the software the drive is the Pioneer DVD-RW DVR- and im trying to install the firmware version i think its called filename DVR FW B EXE i follow the vague instructions from pioneeraus com au and run the exe file and it comes up with a command promp window and i get a dialogue box pop up in front of that titled DVD Drive help Firmware update R/RW quot DVD R/RW Drive Firmware update help UPGDVD quot and it DVD R/RW Drive Firmware update help says quot available target is not found quot i also tried to update the driver through device manager but there is no inf file that i can find on the net so im pretty sure thats a no go if anyone knows a way around this problem or if there is another way to update my driver i would be very greatful if you could help im running xp with a P gig CPU with gig ram and a gig HDD cheers nbsp

Relevancy 100%
Preferred Solution: DVD R/RW Drive Firmware update help

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: DVD R/RW Drive Firmware update help

First of all a firmaware update is not a "driver". all optical drives use the windows native drivers and only MS updates that. I have never seen a firmware update as you describe open a command prompt window. if Pioneer actually uses this method then you will probably have to set the command prompt to the location of your drive. ie; type the locaion ( drive letter of the drive you are updating) if your pioneer is the D drive then you would type D:\ and then press enter

http://www.techspot.com/community/topics/dvd-r-rw-drive-firmware-update-help.52360/
Relevancy 14.62%

I sometimes wonder about techs using tools such as Seatools, HDD regenerator etc to diagnose/repair hard drives. Do any of these tools beat Chkdsk in any way?
(besides data recovery tools, I guess those have no match in Windows).

Thank you
 

A:Do you need more than Windows default tools to check/repair a hard drive?

IMO, always use the tool provided by the vender. At the time you need this tool, you don't need a 3rd party screw-up to 'help you' really mess it up.
 

http://www.techspot.com/community/topics/do-you-need-more-than-windows-default-tools-to-check-repair-a-hard-drive.217548/
Relevancy 14.62%

I've said time and time again that solid state drives are the future but the truth of the matter is, traditional spinning disks still have a place inside a modern PC as a storage / backup drive. The question then becomes,...

Read more
 

A:Latest hard drive reliability data reveals it may be best to avoid 3TB drives

Well I'm glad I have never bought a Seagate HD. I usually buy Western Digital, except my SSD is Samsung.
 

http://www.techspot.com/community/topics/latest-hard-drive-reliability-data-reveals-it-may-be-best-to-avoid-3tb-drives.208285/
Relevancy 15.48%

Hello,
This is my first login and first topic , I see on this category thousands of topic at this time , my problem is error message "The disk is write protected" , I am wondering what is this mean and how to solve this error?
Sincerely Yours,
Have a wonderful day
 

http://www.techspot.com/community/topics/write-protected-drive.217334/
Relevancy 14.62%

SanDisk has come up with a clever take on a common PC accessory that kills two birds with one stone. Its new wireless mobile flash drive is designed to make it easier to transfer files between devices while simultaneously extending...

Read more
 

A:SanDisk's new wireless flash drive kills two birds with one stone

"...when you consider micro SD card slots on smartphones are on the way out."

Just because a prominent phone maker decides to experiment by not including the microSD slot, does not mean this tech is on the way out. There is REAL need for this, and if the big S doesn't want to include this in their phones, people will find other phones that do have this capability.
Lets not forget just how bad sales were/are for the S6.
 

http://www.techspot.com/community/topics/sandisks-new-wireless-flash-drive-kills-two-birds-with-one-stone.216608/
Relevancy 22.79%

Hello I have a Dell Inspiron laptop I have an image of the entire hard drive that I created when I first got the computer using Acronis TrueImage and I d like to restore that image returning the laptop back to that fresh clean original state I ve done this two or three times before and it worked great each time But now there s a problem Normally I would in boots as when drive external but laptop hard Primary recognized isn't drive used connect to the laptop a USB storage backup drive that has the disk image boot the laptop from a Rescue Media CD created by Acronis then restore that disk image from the back-up drive onto the laptop s HDD When I tried it this time round the laptop s HDD was not listed in TrueImage at all I created a new rescue media disk tried it again and got the same result I then took the HDD out of the laptop connected it to Primary hard drive boots in laptop but isn't recognized when used as external drive an adapter kit that let s you power up and plug in the drive via a USB port and external power supply and tried the same procedure using my desktop to run the operation Same result The drive was not detected by Acronis The drive does not seem to spin up at all Primary hard drive boots in laptop but isn't recognized when used as external drive when it is connected Keep in mind the drive still works when installed in the laptop -- it boots into Windows XP etc When I plug the drive into my desktop the drive does not show up in Disk Management Start Right-click My Computer Manage Disk Management It doesn t show up in either of the two right-side windows so there s no way I know of to format it or do any work on it in Windows When I go to Device Manager Disk Drives I see quot USB Device quot for that drive and under Properties it is listed as quot Disk Drives quot for quot Device Type quot and its status says it is working properly So what I don t get is it works fine when it is in the laptop boots into XP etc but when connected as an external drive or when the laptop is being run off of CD the drive can t be detected and not on just one computer but multiple Is it junk Any ideas nbsp

A:Primary hard drive boots in laptop but isn't recognized when used as external drive

It's a power issue. Had the same issue taking a 2.5" laptop hdd and attempting to hook up w/ a passive usb sata hdd cable. my recommendation is to use a powered usb sata cable. like this one: http://www.newegg.com/Product/Product.aspx?Item=N82E16812119475 having proper power will allow the USB bus to detect and power the hdd correctly. Hope this helps, take care!
 

http://www.techspot.com/community/topics/primary-hard-drive-boots-in-laptop-but-isnt-recognized-when-used-as-external-drive.174938/
Relevancy 17.2%

AMD has launched their first WQHL-certified Catalyst graphics card driver update since December 2014, bringing a heap of new features and performance updates across the board, as well as the usual array of bug fixes.

Read more
 

A:AMD launches major GPU driver update: Catalyst 15.7 WHQL

I have played with the CFX and Freesync support on the Acer 1440p 144hz monitor. Works great and makes me want to actually own a Freesync monitor now...
 

http://www.techspot.com/community/topics/amd-launches-major-gpu-driver-update-catalyst-15-7-whql.216359/
Relevancy 15.05%

Hi every one
I need your help gays
I saved some files in my USB but when I explore my USB the files are not appear
it shows that usb is empty
I do not know what to do
thanks
 

A:USB drive doesn't show my files

Have you tried the same USB on a different pc? If not, do so.
 

http://www.techspot.com/community/topics/usb-drive-doesnt-show-my-files.187106/
Relevancy 15.05%

Today, my external hard drive has not appeared on my PC. It did work before I went to sleep yet when I began my PC in the next morning, it didn't show. Can you please help me how to fix this?
 

A:External hard drive not showing up on my PC

Hello there,

There are a lot of different reasons for an HDD to stop showing. A few things you can try are:

Try using a different USB cable, make sure it is as short as the original one, or even shorter. This is important it terms of providing enough power for the drive to function properly.

Try connecting it to different USB ports.

Try connecting it to a different PC.

Sometimes the drive can misbehave due to insufficient power even if it appears to be spinning make sure you connect the HDD directly to the USB port and not through a USB hub.

Check if you can see the HDD in Windows Device Manager and in Disk Management. Good luck.
 

http://www.techspot.com/community/topics/external-hard-drive-not-showing-up-on-my-pc.209548/
Relevancy 15.05%

Hi

Thanks for any help in advance..

I own a WD MyBook 4TB hard drive, which I've used on Windows for the past 2 years. I got a macbook last week and hooked the drive into it, some error message came up so I figured it wouldn't work, however when I went to plug it back into my windows machine I got the "USB device not recognised" message, the laptop is windows 8. I then tried it on my fathers windows xp computer and it seemed to think it was a completely new hard drive..

I've done some googling on it but I just wanted to ask here incase I went formatting it by mistake or anything..any advice/help would be greatly appreciated.

Thanks
 

A:External USB hard drive not recognised on Windows after plugging it into a Mac

Sounds like you made some procedural error, allowing the Mac to alter the partition - - bad choice.

Using Windows tools, examine the partition on that drive - - should show up as
somelabel (dl): size HTFS
Healthy (other qualifiers)​
Try Control Panel ->Admin Tools->Computer Mgmt->Disk Mgmt
 

http://www.techspot.com/community/topics/external-usb-hard-drive-not-recognised-on-windows-after-plugging-it-into-a-mac.200827/
Relevancy 13.33%

Hey there all.

This problem just happened recently. Every time I put a blank CD in my CD drive, a message appears saying "E:\ is not accessible. Incorrect Function. I can watch DVDs but it won't recognize any blank CDs I put.

Any ideas?

Thanks in Advance.
 

A:Drive is not accessible - "incorrect function"

First try this from the Windows Explorer after you have inserted a disc.

Right-Click on E: drive

Select Properties from the pop up menu

Select the Recording Tab

then check the "Enable CD Recording On This Drive" box.
.
 

http://www.techspot.com/community/topics/drive-is-not-accessible-incorrect-function.166087/
Relevancy 15.48%

Hi I have a few questions about my external hard drive. I play games and I noticed that my internal hard drive was getting full so I bought a new external hard drive. I was wondering if I backed up my internal hard drive to my external one and then formatted my internal hard drive, would I have to re install everything or would I be able to access my games and such. Thanks for your time its much appreciated.
 

A:External Hard Drive

You would have to e-install all of your games, and applications, and windows updates
 

http://www.techspot.com/community/topics/external-hard-drive.213122/
Relevancy 49.88%

I have a Razer BlackWidow keyboard Recently I downloaded and installed the latest version of Razer s Synapse on update keys swapped firmware Razer BlackWidow to try and fix this issue I was having with my Naga Lo and behold my Naga issues Razer firmware update swapped keys on BlackWidow were fixed but another problem emerged The new version of Synapse added support for the BlackWidow and also upgraded the firmware But after the upgrade my Windows and Alt keys have been swapped so when Razer firmware update swapped keys on BlackWidow I press one I get the other The only way I ve been able to fix it so far is to use SharpKeys to switch the keys back around but when I connect another keyboard that keyboard now has its Windows and Alt keys swapped It s not that big Razer firmware update swapped keys on BlackWidow of a deal but I do swap to a quieter keyboard late at night from time-to-time and I would really prefer to have it fixed without having to rely on a workaround like this I ve check around and I can t find any information about this issue and Razer s support website is completely useless as usual Likewise I haven t had any luck so far with downgrading the firmware either Does anybody have any idea on what I could do particularly other BlackWidow owners nbsp

A:Razer firmware update swapped keys on BlackWidow

Can't you just go into Synapse and assign the Windows key to the Alt key and vice versa? All the keys are programmable and hopefully this wouldn't affect your other keyboard.
 

http://www.techspot.com/community/topics/razer-firmware-update-swapped-keys-on-blackwidow.182990/
Relevancy 15.05%

Guys I need all the expert help I can get I ve got a Western Digital quot My Book quot i think it was called that that has had every picture that me and my girlfriend have ever corrupt drive hard photos All on newborn external taken including when we first met holidays pets and most importantly pictures of All newborn photos corrupt on external hard drive my girlfriends pregnancy and s of photo s of our month old son that have all gone missing and even some other photo s that still show the thumbnail image don t open because I get an error saying that photo s are corrupt or damaged my girlfriend is already going mad and I don t know what software to get them back At present i ve tried opening with different picture veiwers like photoshop no luck I ve tried EASEUS Photo recovery software but then cancelled because I read that Recova could do a better job turns out recova doesn t work on external drives NOW NOTHING WILL OPEN ON THE EXTERNAL HDD I need some expert advise on what program WORKS to try and recovery these files A S A P because otherwise we will be devistated I don t wanna buy loads diferent software only to find that i m doing more damage nbsp

A:All newborn photos corrupt on external hard drive

try pc inspector file recovery. http://www.snapfiles.com/get/smartrecovery.html

ALWAYS back up photos to more than one device.
 

http://www.techspot.com/community/topics/all-newborn-photos-corrupt-on-external-hard-drive.156964/
Relevancy 15.48%

Got a WD 500 Gb ext. drive. Won't turn on. pls, help
 

A:WD external drive

Is it a brand new hard drive? if yes, then you need to contact tech support of the drive and get help
 

http://www.techspot.com/community/topics/wd-external-drive.212453/
Relevancy 15.48%

How to repair a corrupt 64gig flash drive
 

A:Flash drive repair

Hi, This really depends on how it has 'gone wrong'.
If it's a hardware failure then nothing you can do will sort it out.
But if it's a software/format failure then;
Save everything you want off of it with a program such as 'Recuva'.
https://www.piriform.com/recuva/download
Then Format it again by;
Right-click on the Flash drive's icon in 'explorer' or 'Computer',
Choose 'Properties' from the list,
Choose 'Format'
Set the option of FAT 32,
Untick the 'Quick format' option, so that you are using the slower full format option.
Click OK.
Note that all the files that were on it will be gone, so be sure to save any valuable files first, if you can.
 

http://www.techspot.com/community/topics/flash-drive-repair.212321/
Relevancy 17.2%

I have a Gateway NE56R and ever since I updated to windows 8.1 I cannot use the internet at home even though it says it is connected to WiFi, but it works at other places. Please help asap
 

http://www.techspot.com/community/topics/gateway-ne56r-wifi-doesnt-work-at-home-after-windows-8-1-update.212135/
Relevancy 15.05%

Copying truscont protected usb flash drive
 

A:Copying truscont protected usb flash drive

You said the same thing in the title. You could be a little bit more descriptive. As it stands, I'm assuming you are wanting to copy someone Else's copyrighted media. In either case you couldn't prove the copyrighted media is yours therefor TechSpot cannot help you.
 

http://www.techspot.com/community/topics/copying-truscont-protected-usb-flash-drive.212030/
Relevancy 14.62%

Hello I need urgent help with resolving this as I am trying to get the harddrive showing up or at least recover files by Hard Portable Drive External Slim detected Seagate PC not I was using it at school first and my computer froze so I shut down the Seagate Portable External Hard Drive Slim not detected by PC computer and restarted without safely removing Seagate Portable External Hard Drive Slim not detected by PC the hard drive at first the PC wouldnt reboot because I had it still plugged in after unplugging it and the PC loaded up it did not recognize the hard drive anymore I have tried it on several PCs including the one at home all using Windows and none of them recognize it I tried all USB ports on my PC and none of them work the light on the hard drive is ON so I know there is no connectivity issue I tried several free trial softwares even the ones by Seagate and none of them recognized the drive so I cannot use their tools for recovering files or detecting the hard drive When I check the Disk Management it does not show there When I check the Device Manager it does not show under USB controllers but it DOES show under Disk Drives I also checked and the drive is up to date The Model is BUP Slim BK In my quick launch the drive is recognized there and gives me the option to Eject it but it doesn t actually Eject it when I click on it it either stop responding or does nothing unless I manually unplug it EDIT After a really long time the Eject message says the device is already in use which is probably why it doesnt Safely eject nbsp

A:Seagate Portable External Hard Drive Slim not detected by PC

I am also having the same problem, as I need to get some stuff off my hard drive but it does not show up on any of it, was just wondering if you had found a way to fix this yet?
Kind Regards
 

http://www.techspot.com/community/topics/seagate-portable-external-hard-drive-slim-not-detected-by-pc.207640/
Relevancy 22.36%

Ok im having this problem on 2 desktops. The drives are both DVD-RW drives. They show up properly in device manager and in my computer. That is, untill I stick a disc in it. Then it will spin and act like its about to read then it says its a CD drive with nothing inserted into it. If I explore the drive there is nothing in it. I went to device manager disabled and enabled it. also updated the driver and rolled back the driver they still do the same thing. Wondering if anyone has any ideas or solutions
 

A:DVD-RW drive reads as blank CD drive when disc is inserted

What sort of CD are you using? it could just be that your drive can't read the specific type of disk.
 

http://www.techspot.com/community/topics/dvd-rw-drive-reads-as-blank-cd-drive-when-disc-is-inserted.185776/
Relevancy 17.63%

The impending launch of DirectX 12 is one of the more exciting things to happen in PC gaming in recent years. Many people are eager to see how the low level API will improve the performance of games that implement...

Read more
 

A:You can now test DirectX 12 yourself with latest 3DMark update

This is way windows is doomed. DirectX 12 should be available for win 7-10, but MS is so greedy, they cant seem to understand why they are disliked and windows will evientaly be destroyed by Google. Just look at there market share. I betting big on SteamOS, and once it takes off, I will take the jump. Windows is now to bloated, and with greed, I hope all backers back Vulkan. DX12 on Win 10 only has officially broke the camel back.
 

http://www.techspot.com/community/topics/you-can-now-test-directx-12-yourself-with-latest-3dmark-update.210768/
Relevancy 15.05%

I am looking for a new USB flash drive with all of the following features:

Metal case or very hard plastic. Not rubberized.
USB 3.0 with R/W speeds of at least 50MB/s
No cap, swivel cap or removable protective casing.
At least 16GB or more.

I still have SanDisk Cruzer Micro Titanium. I am looking for something similar in size and features, but faster with bigger capacity.

Any ideas? Thanks
 

A:Recommend a good USB 3.0 Flash Drive

I bought the Mushkin Enhanced Atom 64GB USB Flash Drive. The write speeds are a bit slower than I wanted at 20MB, but read speeds are above 100MB. I can't complain though as the drive performs as advertised. And for what I want it works perfectly. The casing is hard plastic not rubberized. I know you said no cap, I had that rule as well but grew tired of trying to sort through the available options. Anyway I wanted to pass the word on the recorded speed for my purchase. My last purchase was years ago for a 16GB Cruzer Micro like the one you have.

Here are the benchmarks for my flash drive.




Code:
Starting benchmark.
Bechmarking H:(070B51D3EFFD0114)
Started at 3/27/2015 7:46:25 PM
Filename: H:\test.tmp
Starting large file benchmark. With 100MB file.
16384k:6 Write Speed:30.01MB/s
16384k:6 Write Speed:12.35MB/s
16384k:6 Write Speed:12.21MB/s
16384k:6 Average Write Speed:15.29MB/s
16384k:6 Read Speed:120.24MB/s
16384k:6 Read Speed:119.94MB/s
16384k:6 Read Speed:120.17MB/s
16384k:6 Average Read Speed:120.11MB/s
8192k:12 Write Speed:15.81MB/s
8192k:12 Write Speed:11.34MB/s
8192k:12 Write Speed:11.79MB/s
8192k:12 Average Write Speed:12.70MB/s
8192k:12 Read Speed:120.74MB/s
8192k:12 Read Speed:121.35MB/s
8192k:12 Read Speed:121.55MB/s
8192k:12 Average Read Speed:121.21MB/s
4096k:25 Write Speed:12.96MB/s
4096k:25 Write Speed:15.06MB/s
4096k:25 Write Speed:12.31MB/s
4096k:25 Average Write Speed:13.34MB/s
4096k:25 Read Speed:119.21MB/s
4096k:25 Read Speed:118.23MB/s
4096k:25 Read Speed:119.46MB/s
4096k:25 Average Read Speed:118.97MB/s
2048k:50 Write Speed:13.38MB/s
2048k:50 Write Speed:8.91MB/s
2048k:50 Write Speed:8.88MB/s
2048k:50 Average Write Speed:10.01MB/s
2048k:50 Read Speed:111.43MB/s
2048k:50 Read Speed:110.82MB/s
2048k:50 Read Speed:111.68MB/s
2048k:50 Average Read Speed:111.31MB/s
1024k:100 Write Speed:10.32MB/s
1024k:100 Write Speed:12.79MB/s
1024k:100 Write Speed:15.42MB/s
1024k:100 Average Write Speed:12.50MB/s
1024k:100 Read Speed:116.58MB/s
1024k:100 Read Speed:113.60MB/s
1024k:100 Read Speed:116.50MB/s
1024k:100 Average Read Speed:115.54MB/s
512k:200 Write Speed:11.92MB/s
512k:200 Write Speed:14.19MB/s
512k:200 Write Speed:14.09MB/s
512k:200 Average Write Speed:13.31MB/s
512k:200 Read Speed:120.32MB/s
512k:200 Read Speed:119.08MB/s
512k:200 Read Speed:120.05MB/s
512k:200 Average Read Speed:119.82MB/s
Deleting file.
Starting small file benchmark. With 10MB file.
256k:40 Write Speed:8.28MB/s
256k:40 Write Speed:11.13MB/s
256k:40 Write Speed:7.81MB/s
256k:40 Average Write Speed:8.86MB/s
256k:40 Read Speed:94.47MB/s
256k:40 Read Speed:95.36MB/s
256k:40 Read Speed:94.49MB/s
256k:40 Average Read Speed:94.77MB/s
128k:80 Write Speed:6.15MB/s
128k:80 Write Speed:13.09MB/s
128k:80 Write Speed:4.10MB/s
128k:80 Average Write Speed:6.21MB/s
128k:80 Read Speed:91.57MB/s
128k:80 Read Speed:92.04MB/s
128k:80 Read Speed:93.11MB/s
128k:80 Average Read Speed:92.23MB/s
64k:160 Write Speed:8.12MB/s
64k:160 Write Speed:11.53MB/s
64k:160 Write Speed:11.81MB/s
64k:160 Average Write Speed:10.19MB/s
64k:160 Read Speed:87.04MB/s
64k:160 Read Speed:89.33MB/s
64k:160 Read Speed:86.33MB/s
64k:160 Average Read Speed:87.55MB/s
32k:320 Write Speed:1.87MB/s
32k:320 Write Speed:11.50MB/s
32k:320 Write Speed:9.33MB/s
32k:320 Average Write Speed:4.11MB/s
32k:320 Read Speed:31.22MB/s
32k:320 Read Speed:30.31MB/s
32k:320 Read Speed:31.01MB/s
32k:320 Average Read Speed:30.84MB/s
Deleting file.
Starting tiny file benchmark. With 1MB file.
16k:320 Write Speed:1.69MB/s
16k:320 Write Speed:8.21MB/s
16k:320 Write Speed:7.90MB/s
16k:320 Average Write Speed:3.57MB/s
16k:320 Read Speed:28.70MB/s
16k:320 Read Speed:29.28MB/s
16k:320 Read Speed:28.30MB/s
16k:320 Average Read Speed:28.76MB/s
8k:640 Write Speed:4.43MB/s
8k:640 Write Speed:5.20MB/s
8k:640 Write Speed:5.06MB/s
8k:640 Average Write Speed:4.87MB/s
8k:640 Read Speed:24.73MB/s
8k:640 Read Speed:25.06MB/s
8k:640 Read Speed:24.82MB/s
8k:640 Average Read Speed:24.87MB/s
4k:1280 Write Speed:2.83M... Read more

http://www.techspot.com/community/topics/recommend-a-good-usb-3-0-flash-drive.210791/
Relevancy 17.2%

A while ago, after accidentally opening the Store app, Windows forced me to restart to install Windows 8.1, which I was unable to weeks before because of driver issues. I didn't need Windows 8.1 yet, so I didn't download it before then.

However, during the installation, it failed (again) due to either my antivirus or the aforementioned driver issues. Upon logging back in, my computer was unable to find any WiFi networks. Seeing as I live in the middle of a densely populated city, this isn't possible. Plugging in an ethernet cord still works, so no issues with that adapter or my home internet. I checked all the drivers for my WiFi adapter, and my Ethernet adapter, and both are up to date and display as working properly. Restarting several times didn't seem to fix this issue, and using system restore didn't seem to work either. I used the Troubleshooting tool, and that didn't give my any helpful advice or answers, so I got nothing.

What can I do to fix this issue?

For reference, I have a Broadcom 802.11ac Network Adapter, Driver Version 6.30.95.14, and a Qualcomm Atheros AR8151 PCI-E Gigabit Ethernet Controller, Driver Version 2.1.0.7.
 

A:Unable to connect to WiFi after failed Windows 8.1 update

Never mind, it seems to have resolved itself overnight after I put it to sleep for several hours.
 

http://www.techspot.com/community/topics/unable-to-connect-to-wifi-after-failed-windows-8-1-update.210268/
Relevancy 15.48%

My external drive cannot be detected by any computer. I also used diskmgmt and devmgmt. I plugged it to different usb ports as well but to no avail. I have important files here and I really need your help. thanks
 

A:Undetected external drive

What OS and how do u connect to this drive? Also have u tried the drive on another computer?
 

http://www.techspot.com/community/topics/undetected-external-drive.207982/
Relevancy 15.05%

I'm in deep doggy-doo.

When my 2TB Sata-III drive wasn't being recognized (ported to a new build), I pulled the data cable off to check the connection and off came the little plastic tab that guides the plug onto the pins!

Without it, there is nothing to press contact between the cable & pins, let alone hold the cable firmly in place.

Worse, I can't even plug it in to rescue the data off it! I suspect I must have damaged the connection somehow when I plugged it in. The pins appear fine (within reason considering what happened.)

Gluing the tab back in place is no help if the connection still doesn't work and I need to unplug it again.

Am I screwed or is there a way around this mess (short of paying hundreds to some recovery service)?
 

A:Plastic tab on SATA drive port broke off

Oh boy do I know the feeling, I once pulled off the same thing from a month old mobo, but I was able to find a replacement in a shop and soldered it back, maybe you can do the same ? Try finding a female SATA and soldering the other end of it to the HDD ?
 

http://www.techspot.com/community/topics/plastic-tab-on-sata-drive-port-broke-off.209316/
Relevancy 15.48%

So my DVD drive has died on my and I hear if u get a new one off Ebay u have to get the key from the old one DVD a drive 360 dead Replacing and stick it on the new so your Xbox will read it thats all well and good if your drive would work be picked up by PC The drive is dead and there is no way of getting the key Now if my logic is right the key is stored on one of the Microchips in the board so If I can get the chip off the board by heating it up what piece of Hardware would I need to read it and software to get the Needed information off in order to flash it onto the new XBox drive I plan to order I don t want to shell out on a new console as its in full working order despite DVD drive and doing it said way would be cheaper Yes Also if anyoen knows which chip it is on the Xbox Ben Q VAD Drive I be very happy I Plan on replacing it with another benQ drive I point out I do not intend to play pirated games I just want to be able to replace my DVD drive which may be against MS EuLA but I don t care as its not breaking UK law I will use it to back my games up again fully within UK law Thanks in advanced for replys nbsp

A:Replacing a dead 360 DVD drive

If you're positive that the old drive is dead (i.e. no power to the drive) then getting the key is impossible. if the drive has already been flashed then the key should have been saved. i'm quite positive there is no way to retrieve the key from the motherboard itself, without the use of specialized equipment, that you don't have access to anyways.

buy a new console and keep the old one for parts or sell it as is
 

http://www.techspot.com/community/topics/replacing-a-dead-360-dvd-drive.152537/
Relevancy 15.05%

USB flash drive - unreadable, can't format, cannot access

Symptoms in Windows 7/8

1) I Can see drive in "My Computer"
2) Double click on drive in my computer and it says : "Please insert disc into drive H:"
3) Right click and select format and it says: "There is no disc in drive H. Insert a disc, and then try again"

plz provide any solution
 

A:Usb flash drive hp 16gb v215b

Try removing or reformatting the partition from Disk Management. If you can't, see if you can delete the partition and create a new one.
 

http://www.techspot.com/community/topics/usb-flash-drive-hp-16gb-v215b.208440/
Relevancy 15.48%

I am building a new system, only part used is the power supply. My motherboard can't detect my hard drive. I tried switching cables but it only detects my dvd drive. Any assistance will be greatly appreciated.
 

A:Can't detect hard drive

First make shure the data & power cables are plugged in securely, on both the MB and hard drive. and no there is not a power cable for the hard drive on the MB.
 

http://www.techspot.com/community/topics/cant-detect-hard-drive.207744/
Relevancy 15.48%

Not sure where to post this so I can move it if necessary.

Started up my laptop today and I tried to open the cd rom/dvd bay and nothing happened. It will open with a pin pressed into the release hole, but not with the button. (Asus u50f)

When I looked in the device manager there was no drive listed. in computer management/storage/disk management there is no drive showing.

I took out the drive it looks ok. Is there anyway to test it or do I need to buy one and try it?

Thanks,

Warren
 

A:Optical drive is gone

Sounds like u need to replace u'r drive. I am not expert but cd rom and dvd rom do wear out.
 

http://www.techspot.com/community/topics/optical-drive-is-gone.207561/
Relevancy 15.05%

Is there any way of sharing hard drives/folder over the internet with the client side need to install anything.
I.e use add network location option in my computer
Or a client programme that is user friendly

The server side will need to run on my computer,
looked at FreeNas thats not an option,
Filezilla looks like it the best option server side of things but uses a client programe.

Im happy to run any programmes/OS's in a VM if that were needed.

Thanks in Advance
 

http://www.techspot.com/community/topics/sharing-hard-drive-over-internet-without-client-programes.207578/
Relevancy 17.63%

Updated my hardware drivers including the wireless adapter, and something must have gotten changed as I can not connect to wifi anymore on HP Notebook G72-253NR with Windows 7.

Flushed winsock, released/renewed ipconfig and deleted/reinstalled adapter. Can meanwhile connect thru Ethernet cable again but not wifi. Finds my wifi network (previously didn't) but can't connect, don't have tcp/ip addresses in LAC or wireless properties, automatically obtain is enabled. IPv4/6 enabled in both also.

Getting message of "HOST Process was prevented from changing settings of ZoneAlarm by modifying registry key HKCS/Services/VSDATANT? at initial startup.

"COM surrogate was prevented from changing settings of ZoneAlarm by modifying registry key HKCS/services/vsdatant" whenever I simply access/exit ip protocol settings.

How can I fix this? My brain is fried after several DAYS of trying to fix my friends computer... Please someone help!
 

A:Can't connect to wifi after hardware driver update

Call your ISP they will walk you through it.
 

http://www.techspot.com/community/topics/cant-connect-to-wifi-after-hardware-driver-update.206983/
Relevancy 14.19%

I had a new PC so I thought I would do a recovery disk on a separate partition of my parent's disk. Turns out windows wipes out everything regardless of partition when it does that. So now lifelong memories are gone and I'm freaking out! I used EaseUS to make different partitions which were deleted. After I found that the partition I chose stayed the same size but was renamed RECOVERY and it had the recovery data in it. However the rest was "unused" and so I dragged the RECOVERY to make full use of the disk and then I started scanning it deeply with hard drive recovery software. I am now through scanning with my 2nd program now (1st one didn't give me the files I needed) and I'm using RecoverMyFiles. The problem is I'm not really getting back any of the files I had deleted by windows, but I get some stupid windows files which were probably deleted in the recovery process!! PLEASE help me!!! I am desperate. Future hanging in balance thank you.
 

A:Recovering Lifelong Memories from Windows Recovery-Wiped External Hard Drive

There are quite a few programs you could try, I have had most success with Recuva by Piriform, but recently this program was said to be excellent by a user,
http://www.ylcomputing.com/content/view/350/153/
Obviously it's worthwhile trying both of them.
 

http://www.techspot.com/community/topics/recovering-lifelong-memories-from-windows-recovery-wiped-external-hard-drive.207350/
Relevancy 15.48%

I burn a fair amount of DVR disks with games, movies, and personal files. The drive works just fine. I can play DVDs and it reads other disk. However, I have one disk that just isn't reading at all. I ran the Windows Fix it says the media is not readable. When I insert the disk it is loading in the My Computer screen, and then makes a load funny sound and just doesn't read the disk. When it finishes, the drive ejects when you click on it and says to insert a disk. I looked at ISObuster and it also picks up nothing. I'm not 100% certain, but I'm pretty sure the disk was readable at one time. The disk doesn't appear to have any scratches, cracks, etc. Is there anything I can do to get the disk to be readable and work again? It has unreplaceable personal items. Any help would be greatly appreciated.

Thanks!
 

A:Media in DVD Drive is not readable

Have you tried using the disk in another machine, preferably a machine that has a newer drive? Is the disc a name brand disk that you know was bought from a reputable store?
 

http://www.techspot.com/community/topics/media-in-dvd-drive-is-not-readable.207225/
Relevancy 15.05%

Hi,
My USB drive is enabled. The USB flash drive or any other storage device is recognized when connected to my laptop. But when I click on the drive in windows explorer, it says access denied. The same works fine in other laptops. I have admistror previlages. There is no local group policy set up on Removable storage access. I have searched multiple forums and tried out various options, but still cant connect to my USB drive. The drivers are successfully installed and are the latest. This happens even when I connect my camera or mobile phone. It shows up as 'Removable Disk' in windows explorer, but cant access it. I have given authorization to the drive as well. Please help.
Dnana
 

http://www.techspot.com/community/topics/usb-flash-drive-is-recognized-but-still-cant-acess-windows-7.207068/
Relevancy 15.05%

I cloned my failing hard drive (a 160gb) to a new one (500gb). The installation seemed to go smoothly enough (it was my first time though) as it just required me to stay grounded and remove about 4-5 screws. When I loaded the PC up it wouldnt start the first time so I had to a Windows repair, which didn't seem to do anything except now it worked (it said it failed or something). I then had an issue with Windows 7 claiming to not be genuine although for one reason or another that stopped. Now my issue is that I am unable to access the additional memory of my new hard drive, I am able to access the cloned portion but not the rest (about 316gb). Any help would be appreciated, my PC is a Dell Latitude E6400 if that helps.
 

A:Inaccessible Memory on Cloned Hard Drive

Hello there,

It is absolutely normal not to see the rest of the free space in the moment. When you clone a drive you create the exact same image of old drive on the new one. This includes the size of the original HDD. However if you go to Disk Management ( type diskmgmt.msc in the search in the start menu and hit enter) you will see that you have one partition of 160GB and the rest of the space will be listed as unallocated. To use it you have two options ? you can create a second partition or you can extend the original one to take all the available space.

To create a new second partition just right-click on the unallocated space and select ?New Simple Volume?. This will starts a wizard to guide you through the rest of the process. First it will ask about the size of the partition. To use all the remaining space just type in the same value you have for Maximum disk space. Click Next.

Then you will get to choose and available drive letter to assign to this partition. Choose one and click Next.

Then you get to the Format partition window. You should choose ?Format volume with the following settings: ?. For the file system is best to leave NTFS. Allocation unit size as default. You can also put a label for the volume here. Then tick the box for ?Perform a Quick Format. ? Click Next. Then Click Finish. And you're done.

If at any point Windows pops up with the following message ?The operation selected will convert the disk to dynamic... are you sure you want to continue? ? click NO as this will most probably make your Windows unbootable and you will have to reinstall it.

If you want to extend the existing partition right-click on 160GB partition and select ?Extend Volume?. It will start the wizard and will only ask about how much space to add. Just select the maximum available space here and click Next, then click Finish. Once done your existing partition will be bigger and you'll be able to use all the space on your new HDD.

Hope that helps.
 

http://www.techspot.com/community/topics/inaccessible-memory-on-cloned-hard-drive.206835/
Relevancy 33.54%

Hi all,

EEPROM is a hardware piece that the BIOS (which is a code) is inside it. What about some piece named firmware? Is there any independent device named firmware in PC? If so, what does it do?
 

A:EEPROM, BIOS & firmware

A firmware is a structure code, embedded and instructed written languages that is designed by programmer to communicate with devices attached to the particular device. Most especially of our input devices has firmware inside talk of mouse, keyboard, flash drive e.t.c
 

http://www.techspot.com/community/topics/eeprom-bios-firmware.206033/
Relevancy 15.48%

Hi..

I have a problem with opening files from my pen drive. Actually I have deleted all my files from pen drive manually and after when I tried to open the pen drive contents its showing an error

"Please insert a disk into drive G:"

Please help me in resolving this problem.

I tried to rename the drive letter going to disk management but still its not working.

Is there any other method where I can repair or correct my pen drive to work.
 

A:Kingston 32GB Pen Drive

Try using diskpart to format your flash drive.
Open a command prompt (run as administrator).
Type in diskpart and press enter
Type in list disk and press enter
Type in select disk x (substitute x with the corresponding disk number of your flash drive in the list) and press enter
Type in clean and press enter
Type in create partition primary and press enter
Type in active and press enter
Type in format fs=ntfs label=Kingston_32GB quick and press enter
Type in assign and press enter
Type in exit and press enter

I hope that will fix your problem.
 

http://www.techspot.com/community/topics/kingston-32gb-pen-drive.202782/
Relevancy 14.62%

My 320 GB Seagate external hard drive is detected but not showing up in my computer. What should I do?

In cmd> diskpart> list volume it does not show up. (screenshot attached)

In Device Manager it gets detected. (screenshot attached)

In disk management it shows up as 'unallocated'. If I initialize it, will I lose all data on the drive? It had 4 partitions. (screenshot attached)

In My Computer also it does not show up. (screenshot attached)
Even BIOS recognizes it.

What to do? I don't want to lose any data on the drive. If I initialize it in device manager will I lose data?

I was installing window XP on my computer, usually I remove the external drive but this time I did not. The external drive was shown as 4 drives in partition manager during installation. But the installation failed. The next time I was installing windows again, the external drive was shown as 1 single unknown or unrecognized drive. I'm not sure if it was unknown or unrecognized. I'm sure I didn't format it. So what I need to do now? I don't want to lose any data.
 

A:Seagate external hard drive not showing up in my computer. It is detected.

Yes, if you initialize it you will 'lose' everything. You will want to try something like Active@Partition Recovery or maybe Easeus Partition Recovery.
 

http://www.techspot.com/community/topics/seagate-external-hard-drive-not-showing-up-in-my-computer-it-is-detected.205926/
Relevancy 15.48%

Hello all,

My machine is running XP professional. My problem is about the CD/DVD drive. In normal state, when it's empty, it can be opened and closed just as normal. But for most of the CDes or DVDes, one problem will occur.
The problem is, first that CD or DVD will not be read/recognized. Then the CD/DVD drive is no longer available in my computer window like that is not recognized as well. And also in deice manage's list, there isn't any CD/DVD drive item!
In those situations, every time I need to restart the PC one or several times and try to eject the cd drive and put out that CD/DVD and start the machine again. Then the CD drive will return again!

How to fix that problem please?
 

A:My problem with my cd/dvd drive

Hi, It could be the DVD's firmware is out of date or corrupted in some way (unlikely though.)
If the DVD drive shows in 'Device manager' at first boot, with no disc in, try uninstalling it (right click on the drive) then reboot the pc, it should re-discover it.
Also remove both the power plug and the data plug from the back of the DVD drive and plug them back in again just to remake the connections.
Might be worth checking the connections from the ribbons to the motherboard as well.
 

http://www.techspot.com/community/topics/my-problem-with-my-cd-dvd-drive.206353/
Relevancy 15.48%

My Buffalo HD which is actually a WD 500GB Hard drive. I opend it up and connected via SATA adapter but still the problem persists. I checked the drivers. Looked for clicking noise as in dead hard drive but none of those problems seems to be there. Also I tried formatting it but was unable to do so. Can anyone tell me whats the cause? It still may be the head problem but its not clicking as a dead hard drive does. It also seems to be spinning just fine but can't get to the root of the problem. Does anyone knows whats the problem?
 

A:Hard Drive Not Responding

Could be some issue on the PCB. Suppose if you were really dedicated to getting your data back you could buy the same drive off eBay or wherever and swap the boards. That may be more difficult to do since Buffalo may not have stuck to WD the whole time OR WD supplied a special series of drives to Buffalo. Check the model numbers to be sure before going that route.
 

http://www.techspot.com/community/topics/hard-drive-not-responding.206015/
Relevancy 15.05%

My old hard drive was a sata drive but it failed so I had an old ide 80gb barracuda 7200rpm drive that I wanted to install windows on but when I load the windows installation and goto custom it wont show my drive. My bios detects it its just windows . I tried using diskpart and even formating the drive to ntfs witha complete whip but still no luck .
 

A:Windows installation can't detect my ide hard drive?

Perhaps the hard drive's jumper setting is incorrect. Are there any other IDE devices connected on the same cable as the HDD?
 

http://www.techspot.com/community/topics/windows-installation-cant-detect-my-ide-hard-drive.192208/
Relevancy 15.05%

Hi,

Quick question and I believe the answer is NO. If you have a PC with one drive where OS is already running and configured, can you add another identical drive and configure RAID 1 without having to reinstall or reformat anything?

Thanks
 

A:Setting up RAID 1 on already running OS drive

Hey there, pioneerx01!

Unfortunately, you can't convert a single drive into a RAID array without data loss. At least one sector will be overwritten, which will cause problems because the file system and partition information will not be correct anymore. This will lead to a lot of annoying notifications and very unpleasant problems.
However, I believe there's a chance to create RAID arrays while keeping the data but I'd strongly advise against it.
The best way to deal with this is the safe way - back up your data and properly create the RAID 1 array.

Hope this helps.
SuperSoph_WD
 

http://www.techspot.com/community/topics/setting-up-raid-1-on-already-running-os-drive.205730/
Relevancy 15.05%

This issue started when I was connected to it and while accessing it recognized Google at day my despite External drive fu not attempt long I touched the cable and it disconnected Since that External drive not recognized despite my day long attempt at Google fu no luck in finding the external drive to External drive not recognized despite my day long attempt at Google fu access it I ve been using it for a a year and although a touch of the cable caused a disconnect it still worked well The device shows up nowhere on my laptop which I use to edit my photographs Here s a screenshot showing device manager disk management etc http I imgur com u ezzj png The hard drive is a WD MyBook Essential TB that is named quot Local Disk E quot on my laptop I should mention the hard drive s light is on when I plug it to the computer and will idly blink The light is off if not connected to a computer even if it is plugged in to a power source My troubleshooting steps Use different cables-- did not work Connect it to other USB ports-- did not work Connect other devices iPhone and a different WD hard drive -- all devices work on all ports Check for presence in disk management and device manager-- nothing there so I can t change the drive letter Remove all USB drivers and reinstall using Intel USB driver set obtained from Asus website using my computer model Asus G VW http www service asus com downloads c wax -- did not work Install drivers obtained from WD support website link to model http support wdc com product download asp groupid amp lang en -- did not work Shut down disconnect then start up and connect hard drive-- did not work Change cables and test-- nothing wrong with cables The biggest f you of them all connect the same hard drive to another laptop-- works flawlessly I am at a complete loss on what to do nbsp

A:External drive not recognized despite my day long attempt at Google fu

What do you mean by the point #9. Did it really worked well on different computers? Have you replaced cable or anything before connecting it to different computer?

The reason I'm asking it because you've already tried everything we could suspect off for the external hard drive to not work properly.

Instead of connecting it externally, try connecting it directly to the motherboard using SATA/IDE cable and see if it may start properly and allows you to see your data properly.

In worst case, you can take help from the WD support professional or alternatively, can ask for returns if the hard drive is in warranty.

Good luck though!!
 

http://www.techspot.com/community/topics/external-drive-not-recognized-despite-my-day-long-attempt-at-google-fu.205135/
Relevancy 15.48%

I have this flash drive:
http://www.amazon.com/PNY-Turbo-Performance-Drive-P-FD128TBOP-GE/dp/B00FE2N1WS

And I am afraid it is dead. When I plug it in, 50% of the time, the red light constantly flashes at about 8 flashes a second, or flashes 3-4 times quickly before just shutting off and nothing happens.

If it is in constant flashing mode, I can open my windows explorer and see "Removable disk", however it is slightly transparent, and when I try to open it, it says "Please insert a drive", which leads me to believe the computer detects it, but can't read it. The properties window shows 0 bytes. Is there any hope at all of getting my ~65gb of used data off of this thing at all? Do I have to take it apart and do some soldering? Please help.
 

A:PNY 128 GB Flash Drive not working

Your flash drive probably has a damaged controller. If that data is important, best chance of retrieving your data would be a professional data recovery service. The cost of recovery depends on how extent is the damage of your disk.
 

http://www.techspot.com/community/topics/pny-128-gb-flash-drive-not-working.204524/
Relevancy 15.05%

So, when I built my PC I installed the OS on a HDD drive with the thoughts that I could later transfer it to SSD,

(did it before using hard drive cloning software to copy the OS drive to a new drive and then once working formatting the old drive.)

however when I started doing some reserch on cloneing software I noticed that windows 7 might not be cloneable (my past experiances are with XP) since there are mixed reviews on each bit of software out there both on Amazon and on the web. sevral report that windows 7 sees the clone as an unlicenced copy and refuses to boot. others say the clone drive misses it's boot file.

can some people advise me on if any of these facts are true or not?
 

A:Hard drive migration to SSD questions

Hi.
Cloning should work fine if you do it properly with windows 7. It's possible that windows can throw up a licensing issue, but very unlikely. In the event that it does, call Microsoft and they should be able to get it sorted out for you.

As for the bootability of the drive, cloning the drive's data does not necessarily make it bootable, but if you look online you'll see some cloning tutorials that include a section for rewriting the MBR on your SSD to make it the primary bootable drive in case it ends up not booting properly. This isn't hard to do and usually isn't a necessary step.

Also just keep in mind that simply cloning the SSD will probably result in an unaligned drive, so make sure that you get it properly aligned. Some cloning software has an aligning option built into the cloning process that you'll want to select.

So go for it and come back if you're having any issues.
 

http://www.techspot.com/community/topics/hard-drive-migration-to-ssd-questions.204382/
Relevancy 15.48%

Okay, okay, I know that most of you stopped using floppies long ago. But my question is: I was about to buy a Buslink external USB floppy disk drive (brand new, still sealed) from someone on Craigslist, and just wondered if it's a decent brand.

And would have I have by anything extra, other than perhaps a cord? Never done this before.
 

A:Is Buslink an okay brand for an A-drive?

I'm sure it is fine, the technology in those hasn't changed since about 1992, lol. The only thing that is different is the USB interface. The drive alone should be enough, I don't think USB Floppys needed external power.
 

http://www.techspot.com/community/topics/is-buslink-an-okay-brand-for-an-a-drive.204731/
Relevancy 15.05%

Hi, I have a Verbatim Store n' go ex hard drive which used to work perfectly with usb 3.0 and 2.0. A few weeks ago it stopped working with 2.0 and now not even with 3.0. When I plug it in the hard disk starts to rotate and lights up normally, but is never shown on the drive list. The computer doesn't even do the beep sound when a usb device is connected. I tried on 2 different pc's but they show no result.

Any kind of help is greatly appreciated
 

http://www.techspot.com/community/topics/external-hard-drive-failure.204788/
Relevancy 15.05%

Hi Frnds

I hav a Toshiba 1 TB external HDD. It was working fyn till today. Now it is not showing in My Computer or Disk Management. It does make the sound when I connect or disconnect it from the laptop. and the HDD light remains on.

Please advise how to fix this

Thanks
 

A:Toshiba external USB hard drive not detected in any laptop

Go under the Device Manager and uninstall all the USB Controllers then reboot your PC don't connect the 1 TB just yet. Make sure nothing is connect to those ports like a keyboard or mouse otherwise they'll lockup. Once rebooted Windows will rebuild the table for USB Controllers. Now you should be all set. Unless you have some sort of conflict with IRQ or Registry setting. There is a free app called USBDVIEW what you would do is disconnect from all non-disconnected USB devices that are stored on the PC these settings can cause all sort of issues.
 

http://www.techspot.com/community/topics/toshiba-external-usb-hard-drive-not-detected-in-any-laptop.173740/
Relevancy 15.05%

My bother had deleted my laptop partition files and folders when attempting to extend my C partition. All my stored partition movies were lost and could not be found in Recycle Bin. Do you know where these partition videos are? I really want to view these videos again. What can I do to rescue them? Thank you for any advice!
 

A:Delete hard drive partition data

Hey, Luminaton03!

Sorry to hear you are experiencing such an issue.
Your data is stilll there somewhere as long as you don't overwrite it. If you save new data, it would rewrite your previous files.
I did some research for you and I found a threat that you might find helpful:
http://answers.microsoft.com/en-us/...back-the/a003d747-b760-42a7-819b-0235e8ec6d2c

I really hope this works for you!
Good luck!

SuperSoph_WD
 

http://www.techspot.com/community/topics/delete-hard-drive-partition-data.204583/
Relevancy 15.05%

Hello,

Is there any difference between software which are used for recovering data from HDD or flash memory drives and SSD? For example, can we use of the apps used for HDD to recover data from SSD too?
 

A:Solid state drive data returning

I do not see why the HDD programs shouldn't work for SSDs. Maybe @jobeard can weigh in if I am wrong. I would check out this article.
 

http://www.techspot.com/community/topics/solid-state-drive-data-returning.204388/
Relevancy 15.48%

I'm trying to partition my hard drive, when I click shrink, it takes me to the shrinking window and it says:

Total size before shrink: 704749 MB
Size available to shrink: 7185 MB
Enter the amount of space to shrink: 7185 MB
Total size after shrink: 697564 MB

I don't understand how I have so much space, but I can only shrink it 7185. It is an NTFS.
Here's some screenshots
 

A:Why can't I partition my hard drive more?

Some files that are read only are preventing you from shrinking beyond a certain point while those files are open.

My suggestion would be to use partitioning software that is bootable. Boot to the disk and shrink your partition without windows running.

There are several freeware apps available to select from. The one I use is Partition Wizard Boot CD.
 

http://www.techspot.com/community/topics/why-cant-i-partition-my-hard-drive-more.204093/
Relevancy 15.48%

My hard doesn't show up anymore.when I plug it in I hear 2 beep sounds coming from it and then nothing.any one now what the problem might be.
 

A:WD external Hard drive

Probably an internal hardware failure on the drive. Hope you had your data backed up from that drive.
 

http://www.techspot.com/community/topics/wd-external-hard-drive.203951/
Relevancy 15.05%

Tried just about everything but I still can't seem to get my external hard drive to show up in my disk management or computer. It say it's installed and ready to use but I don't see it.. only in the device manager and in devices and printers I can see it.. but nowhere else.. I'm working with windows 7 upgraded from windows xp but has be downgraded which was originally windows vista I think.. A friend gave me a computer and I had it upgraded.. can any one help me get my computer and external hard drive straight. Thanks.
 

A:Don't see my external hard drive in disk management or on computer

Check this thread out: http://goo.gl/rxkBN
 

http://www.techspot.com/community/topics/dont-see-my-external-hard-drive-in-disk-management-or-on-computer.203836/
Relevancy 14.62%

The Seagate Momentus 5400.6 hard drive I'm using is from my old laptop it has 4 disks.
After I put it in the (IT-CEO IT-700) enclosure, and connect it to my new laptop it does not show up in 'My Cumputer' and 'Disk Management', but displays in the 'device and printer' section of control pannel.
I also can't eject the hard drive, even when I'm not doing anything to it, the (IT-CEO IT-700) enclusre's blue signal light just keeps flashing for a while then goes off for a sec, then resume flashing again.
My laptop also keeps trying to install the hard drive.

I tried reinstall the hard drive's driver, but that did not solve the problem.

Please Help.
 

A:External Hard drive not showing up in 'My Computer', and 'Disk Management'

Have you tried using different drive enclosure other than the IT-CEO IT-700?
 

http://www.techspot.com/community/topics/external-hard-drive-not-showing-up-in-my-computer-and-disk-management.201875/
Relevancy 15.05%

I have a Dell Precision T which I just purchased off of Ebay Recognized Possible Hard Formation, Second Not Drive Raid It came with gb of ram and gb hard drives installed In quot my computer quot it shows drive quot c quot but not the second drive This computer supports raid configurations but when I received it it had no operating system installed I installed windows ultimate bit This computer has quad core processors and I have been noticing a Possible Raid Formation, Second Hard Drive Not Recognized slower response time lately which leads me to believe it may be in one of the raid modes even though they are supposed to be faster most of the time Possible Raid Formation, Second Hard Drive Not Recognized I went into the bios and the setting it is on is to automatically detect raid configuration in the drives and if not detected the regular mode I read some information about raid setup and cannot find the software quot Intel Matrix Storage Console quot on the computer to help verify or change settings Could this be an extra program like drivers that are downloaded from the Dell website because they don t normally come with a regular windows install If someone is familiar with configuring raid formations could you please help me determine what my system is set on and how to set it properly I would be satisfied to not have raid active as I don t need that kind of constant backup My work is not that important I can back up important files in other ways nbsp

A:Possible Raid Formation, Second Hard Drive Not Recognized

What shows up in the Disk Manager vs the Device manager?
 

http://www.techspot.com/community/topics/possible-raid-formation-second-hard-drive-not-recognized.202015/
Relevancy 15.48%

My External hard drive wont open without format I try doing format it gets stuck I try opening computer > mange > disk management it wont open unless I take it out and gets stuck and gives me connecting to virtual disk service
please please help me! im freaking out I need this hard drive to work I need help
 

A:External hard drive

If you need this drive because there is data on it, formatting is the last thing you want to do.
 

http://www.techspot.com/community/topics/external-hard-drive.203628/
Relevancy 18.06%

CPU:AMD FX-8320
Motherboard:ASUS M5A97 R2.0
OS:Windows 8.1 64-bit

I hardly know anything about the BIOS so I am asking you this:
Will I need to update my BIOS and if so how to do that?
Am I going to update it to the latest version(2103) or the version when the processor was first compatible(1006)?

Please help, I do not want to make a mistake when updating so please provide a detailed explanation ! ! !
 

A:BIOS update

Some might say updating the BIOS is not worth the risk unless you have a reason to chance it. On the other hand I've never had a BIOS update go badly. BIOS updates are not that difficult to do. But there is always a risk of the update failing. In the off chance of failure, the motherboard will be bricked. There are motherboards that come with a second BIOS for failsafe. I don't know if the failsafe can be used under a bricked board, I will assume it can until I hear otherwise.

There are three ways to update that I am aware of. All of which may not be available depending on motherboard model and age of system.

Within the Operating System (I've used this method but for awhile it was advised against)
You will need to download BIOS Update application. The application will download and install the new BIOS.

Within the BIOS
Within the BIOS there is an update facility. You will only need the new BIOS. (My BIOS will only update from a USB stick.)

From DOS utility
Not only will you need to download the new BIOS, you will need to download the flash utility that is designed for the update.

I recommend updating from within the BIOS (assuming you have this option). Download the new BIOS to a USB stick and then boot into the BIOS. Browse around to find the update facility and the rest is self explanatory.
 

http://www.techspot.com/community/topics/bios-update.198931/
Relevancy 15.05%

Recently a hard drive named OS (X: ) (space inserted so it isn't posted as a smiley face) appeared in my computer. It seems to be identical in memory to my actual hard drive, but is actually empty. What exactly should be done about this?





 

A:Empty extra hard drive?

Not sure off hand but I'd open up Disk Management to see what it says there.
 

http://www.techspot.com/community/topics/empty-extra-hard-drive.203533/
Relevancy 15.05%

Hello,

Old Dell computer running Windows XP that was never backed up and I am trying to recover files and photos. I get NTLDR is missing when I boot. I've used Testdisk/Photorec to try to recover my data but when going through the recovered data it seems to be all system files that I know nothing about. I used Ubuntu on the Dell to run Testdisk. I also hooked up the hard disk to my laptop with a hard disk adapter and got the same results.I also ran a NTLDR boot disk but ended up with the same NTLDR is missing message. I dont have a XP recovery disk. Anybody that has had this issue please help!
 

A:NTLDR is missing. Hard Drive Failure.

Trobles86 said:





I also hooked up the hard disk to my laptop with a hard disk adapter and got the same results.Click to expand...

If you have access to another PC or laptop then you can connect the hard drive in to that machine and get the files you wanted to recover from your hard drive in there.
 

http://www.techspot.com/community/topics/ntldr-is-missing-hard-drive-failure.203104/
Relevancy 15.48%

Hello I have just removed much malware and viruses from a computer with windows vista. It is still running slow from time to time, having problems with freezing on the internet and I thought maybe by defragging it would fix the issue. Yes I have reset firefox many times, scanned many times fully for viruses and malware, removed and reinstalled flash player, etc. I need to first backup the C drive only because the D drive is full of crap. I cannot afford to do anything other than DVD-R to store it on. I am trying to find out how to do this. Is anyone familiar with such a process?
 

A:How do I backup C drive from Vista to DVD-R?

First, run CLEANMGR for each login on the PC and that includes Administrator.
This reduces the amount of data captured to at least active & meaningful.

Second, IMO backup \Users and forget all else
 

http://www.techspot.com/community/topics/how-do-i-backup-c-drive-from-vista-to-dvd-r.202672/
Relevancy 15.05%

I have 64bit Win7 Home. My C: boot drive is a 120GB SSD with most of my programs installed on an ordinary HDD, saving the SSD for frequently used stuff.

I bought a duplicate SSD (same brand/size/model) for the purpose of creating a Raid-0 array.

I've backed up everything on my SSD, but how do I restore it once I setup the Raid?

Thx.
 

A:Moving single C: drive to Raid-0

Copy/paste?

Or create image of the SSD, then apply it to the raid partition.
 

http://www.techspot.com/community/topics/moving-single-c-drive-to-raid-0.203051/
Relevancy 15.05%

I am a beginner of hardware. I find two series of SSD to compare, 840 EVO and M500, because the specifications and the prices of them are approximate.

Both of them use SATA 3, so you need to compare with the read speed and the write speed, if you prefer faster one. The sequential read speed of 840 is 540MB/s, and the sequential write speed is 410MB/s. M500 is slower, but the performance of M500 is great as well, its Shock-resistant design makes it more durable than 840. The most important thing of SSD is the controller, 840 uses 3-core Samsung MDX controller, M500 uses Marvell?s latest controller, maybe the second one is better.

This is my poor review, how to compare them with more details, give me your advice.
 

A:The comparison of hard-state-drive, Samsung VS Micron

Read in-depth reviews such as this:
http://www.techspot.com/review/709-samsung-840-evo-ssd/
 

http://www.techspot.com/community/topics/the-comparison-of-hard-state-drive-samsung-vs-micron.202945/
Relevancy 17.63%

Hi there
need to know if I can upgrade my graphics card for upgrade to windows 7.
current graphic card:ati radeon 9200 se 128mb ddr tvo
computer :fujitsu siemens scaleo 600
motherboard :microstar ms-6585 2.oa
power supply:dc output 250w
thanks so much.
learner1
 

A:Graphics card update to host windows 7

I don't know if you CAN upgrade your graphics card, but:

You most likely don't NEED to.
It's not really a good idea to upgrade at all. Those parts are old as dirt and you won't find anything cheap that'll fit.

 

http://www.techspot.com/community/topics/graphics-card-update-to-host-windows-7.202568/
Relevancy 15.48%

Hi Im new here and im hopeless hope u can help me, !st sorry because I cant find in forum on my problem. well here it is..

I have Samsung 900x New series 9.0 Usb slot is 3.0. just a simple problem but for me its big problem, I cant install any of my 6 pcs usb all is 2.0, It detect yes in device manager but cant install while im updating driver so my laptop can install what usb I inserted, It says error code 28. acess denied, so I cant install any of my flash drive including my external hdd 500gb, pls can someone help me.. I already search to google but non of it helps.. Thanks very much! hope to hear from you guys,
 

A:USB Flash Drive U2 to U3 slot

Can you please provide more specific information of your laptop's specifications and operating system used.
 

http://www.techspot.com/community/topics/usb-flash-drive-u2-to-u3-slot.201977/
Relevancy 15.48%

Hello all!!!! My name is John. I am trying to find some help with an issue that arose after I installed a new hard drive in my computer. I started getting a message that stated:

C:\Users\Owner\App Data\Local\Conduit\API Support\API Support.dll

Anyone know how I can repair this? I saved an image of my system before installing the new hard drive and then just downloaded the image to the new hard drive. HELP!!! please!!
 

A:Installed new hard drive

You might just need to run some registry cleaners to fix and remove those corrupt registry keys.
 

http://www.techspot.com/community/topics/installed-new-hard-drive.201991/
Relevancy 15.05%

My computer recognizes that the hard drive is there as local disk E but wont actually load. I can get it to load on my tv but it wont play my movies. Please help it has a lot of important things on there,
 

A:External Hard drive not loading

You could try running chkdsk /f in command prompt to check and fix errors on your drive.
 

http://www.techspot.com/community/topics/external-hard-drive-not-loading.202166/
Relevancy 15.05%

I have had a look round the posts but nothing I try stops the internal drive getting accessed.
I have unchecked the CD autorun using TweakUI (this worked for someone else)
I have temp disabled AVG along with BoostSpeed and Team Viewer
The only process running apart from sys idle is svchost.exe (1%)

I hope someone out there manages to work their magic as they did the last time I posted here!
Thanks
 

A:Hard drive light flashing with nearly no processes running

Sounds like the System Index service is running.

When you find that happening, disconnect from the Internet to be sure MS Update is not running or something on your system is phoning home to be sure.

To see all Internet connections from your PC, grab a copy of CurrPorts - - runas admin and you will see everything. Click on the column heading Remote Host Name to get active connections at the top if the list. The menu Options is used to customize the display; here's my list

display Listen, Established, TCP, UDP, IPv6,

display port in The Address,

sort on refresh,
Ask Before Any Action
That last one is interesting; running as admin, you can Close a port or Kill the application with that port.

CurrPorts identifies all ports on the pc (mine number 112 as I write) and if I select all ports with a Remote Address, I see I have 20 connections.

btw: Remote Addresses shown as 127.0.0.1:nnn are local services (like a proxy or AV service), so out of the 20, only two are actually remote - - both HTTP browser connections.
 

http://www.techspot.com/community/topics/hard-drive-light-flashing-with-nearly-no-processes-running.202265/
Relevancy 15.48%

Hello. recently I have been getting the Drive e needs to be formatted before it can be used. However, I have no drive e. there are no flash drives or sd cards plugged in, its a laptop so it has the normal c drive and the system d drive (ie 1 hard drive). I have no dvd drive as I have removed it because it has been causing problems. in disk management it has drive e there, but no name to it and it is in the raw format. any idea as to how to remove this nuisance?

Windows 7 32 bit pro
hp pavilion dv6700 laptop
 

A:Format drive E

Just format it, you shouldn't get further prompts. Then you can see if it's another partition on your main HDD or not.
 

http://www.techspot.com/community/topics/format-drive-e.201098/
Relevancy 15.48%

Hi, I have problem with my flash drive. It just won't load, I tried everything, and still nothing.
Here is some pictures that can help.. I think..








 

A:Problem with Flash Drive

Windows installs multiple drivers for this device. This is the 2nd driver (that's failing to install). The first will be listed under USB in Device Manager. By default, Device Manager only displays a device when its connected.

Plug in/remove your device and look for a device appearing/disappearing under USB. It'll probably be a USB Mass Storage device. (Maybe a USB Composite). When you find it, right click it Properties->Details tab. Use the pull down menu to select Hardware IDs. Copy/paste what you see in your next post
 

http://www.techspot.com/community/topics/problem-with-flash-drive.201684/
Relevancy 15.48%

Greetings all The DVD RW drive on my HP Pavilion dv series us is not working Please find the relevant details below The drive is Model TS-L N HPMH - I think this is Toshiba It s detected in My Computer as HD-DVD ROM When I try to play a CD DVD the light comes on and spins but then shows quot Please insert drive not as DVD ROM CD working - shown a disk into HD DVD-ROM Drive F quot DVD drive shown as CD ROM - not working The Device Manager detects it DVD drive shown as CD ROM - not working as a CD ROM and obviously the Windows generic driver doesn t work The Device Manager picks it up as an quot Unknown Device quot and is shown as quot NCB XYB QNKX SCSI CdRom Drive quot The driver is not available on the HP site so tried the regedit option I believe I deleted all the strings associated with the driver key Then tried the Microsoft tool which must have installed the generic driver which causes the DVD drive to be recognised as a CD ROM instead I tried the sfc scannow as well and it shows that there are corrupt files which could not be fixed The laptop works well otherwise Please help Where can I find the driver for the drive How can I go about fixing this issue nbsp

A:DVD drive shown as CD ROM - not working

List any Problem devices

Make sure devices are connected and powered on
Click the Start Orb, type msinfo32 in the search box. Hit Enter
Click the + sign next to Components to expand it
Click Problem Devices. Anything appear?
If yes, click on it, Ctrl-A to select all, Ctrl-C to copy it, Ctrl-V to paste into next post
On the other hand, if no devices are listed, tell me so

 

http://www.techspot.com/community/topics/dvd-drive-shown-as-cd-rom-not-working.201725/
Relevancy 15.05%

I have to say I am a little worried about my hard drive. Often I bought it for the purpose to protect my game videos, and some program files. For a long time, it behaved rightly with my HP windows 7 desktop when directly used. Sometimes ago I decided to let this old PC alone and bought a Macbook pro. The latter has no such a SATA interface for me to input the data from this drive. For the convenience, I borrowed this SATA dock from my brother . ( I have to admit previously I once use another dock to exchange the data . )

My mac just could not recognize my drive as a normal one. I am not sure where the problem lies in. The key is that other drives have no similar issue with this dock. I wonder if anything happen before in the process I handle the data with another dock.

Grateful for any advice.
 

A:Previous WD hard drive 500GB could not be recognized as it always

Yeah. At present I have no such another one to have a try. I will turn to my friend see if any gadget he has to test my drive.
 

http://www.techspot.com/community/topics/previous-wd-hard-drive-500gb-could-not-be-recognized-as-it-always.201163/
Relevancy 15.05%

Okay not really very good at this but my laptop stopped working so I took hd out and connected it to anotherlaptop through usb lead it appears in my disk management (although it shows up grey instead of black or blue if that makes sense to anyone) but it wont show in my computer I have a load od family photos on this drive and would really love some help and will send out good karma to all who try to help me many thanks in advance
 

A:Trying to recover data from crashed hard drive

Hi techmichellenot. When you say it stopped working,is there anything on the screen when you power up, or any indication that the system passed it's POST procedure (Power On Self Test), usually indicated by a beep before Windows itself tries to boot up?. Any error messages seen?. Sounds like you put the drive in an external case that can connect via USB. If there is indeed a problem with the disk drive and it's not a physical problem with the drive (maybe a corrupted Windows boot file,etc),your system may have a Recovery procedure that will reinstall your OS without erasing your data files (called a non destructive OS reinstall) as opposed to a destructive which erases everything and reinstalls the OS. I would check your documentation to see if your laptop has such a procedure.
 

http://www.techspot.com/community/topics/trying-to-recover-data-from-crashed-hard-drive.189487/
Relevancy 15.48%

Hi all!
C drive on my computer is almost full, I keep receiving notifications regarding no or less space in C drive. I have Partitioned my hard disk into 3 parts.
C drive is only 25 GB :/
D drive is 80 GB
E is close to 150 GB

I would like to increase my C drive space from 25 GB to 100 GB cutting E drive down . I am unable to do so through disk management. The option Extend Volume is grayed out. Please suggest an alternate way to increase the volume of my C drive. The OS I have is Windows 7 ultimate!!
Thank you in advance.
 

A:How to increase volume on C drive

0. Make sure you have everything you can't afford to lose backed up.
1. Get Easeus Partition Master (the free one for home use)
2. Shrink E
3. Expand D
4. Shrink D
5. Expand C

Partition Master may let you just shrink E and expand C, but if you have a traditional partition layout the steps I listed will have to occur (even if PM hides the middle ones).

Personally, I would do 1 step at a time and reboot between each. This way if something goes wrong your chances of recovering are much greater.
 

http://www.techspot.com/community/topics/how-to-increase-volume-on-c-drive.200779/
Relevancy 15.48%

Do you know how to increase my C drive without deleting some important data or programs? In fact, yesterday, when I attempted to install a newly download program, a message popped out and told me there was a low disk space problem. I had also checked my C drive space. There was really 597MB of free space left. So, I just want to increase this drive successfully. Do you how I can do that? Any advice could be greatly appreciated here. Thank you!
 

A:How to increase my C drive without deleting something?

Open up My Computer and tell us if there is any available space on another hard drive.
 

http://www.techspot.com/community/topics/how-to-increase-my-c-drive-without-deleting-something.200953/
Relevancy 15.48%

I put together a comp. with parts of my brothers old comp. For my brother to have a new 1 ,but he wanted programs like office "which is on his old Hard drive" and my widows vista business that I have doesn't have office . So I thought maybe I could put his old hard drive as a slave drive and he would have all his old programs ,but it say's they won't run on that OS. Is there any way around this or am I better off getting office somewhere and fresh installing it ?His old Comp. was a Dell.
 

A:Running off slave drive

What you want to do can't be done. Has to be installed on that Windows install.

Does he really need "Microsoft Office"? because there are a few pretty solid free office suites out there, just for some of the more complex formatting causes problems sharing with people that use Microsoft Office.
 

http://www.techspot.com/community/topics/running-off-slave-drive.200846/
Relevancy 15.48%

Hi all I have custom built pc and in last month now and then it switches off I believed it to be a faulty psu but now ive notice blue screen couple of times I looked it up and it points to faulty hard drive .also on restart I get few chkdsk .so I thought ok I got spare harddrive ill clone main one on to that and use that but when I plug it in it shows up but making a weird noise, also secured by bit lock,, I put password in and then it dissapears with error something like cannot be specified ...does this mean both hard drives have failed or could it still be psu maybe not giving enough power..thanks in advance.. any more info please ask
 

A:Hard drive fail

A noise coming from the hard drive you replace is faulty,,, it's indicates mechanical failure..you better buy new one...
 

http://www.techspot.com/community/topics/hard-drive-fail.200737/
Relevancy 15.48%

I have had this laptop for several years but recently the cd dvd drive has stopped reading discs In the past couple of months it has gone from sometimes reading a disc to not reading any disc I try putting in I have tried using different discs and lately it has not been reading any of the ones I try I have tried uninstalling the driver and restarting my computer but that hasn t helped reading CD/DVD not drive discs I tried to update the driver from the device CD/DVD drive not reading discs manager but it just tells me that I have the current version From what I can remember I started noticing the problem soon after I installed VLC media player but I m not sure how to determine if that is causing the issue or not CD/DVD drive not reading discs I have also tried to delete the Upper Filters from the registry but I can t find the files named quot Upper Filter quot or quot Lower Filter quot Earlier this week a co-worker suggested I try one a cleaning cd that has little brushes on it to clean the lens in the drive but I am a little hesitant about that but I am willing to CD/DVD drive not reading discs try it Just last night I tried wiping the lens with a cotton swab Q-tip with a little bit of rubbing alcohol on it to see if that would help but I am still having trouble today My computer is a Dell Insprion running Windows -bit In the device manager under DVD CD-ROM Drives it has quot HL-DT-ST DVD -RW GT N quot If there is any other information that would help I will do my best to find it but I am not very computer-literate Thanks for taking the time to read through all this nbsp

A:CD/DVD drive not reading discs

First see if you can boot your computer from CD. If you can't, then your drive is shot
 

http://www.techspot.com/community/topics/cd-dvd-drive-not-reading-discs.200504/
Relevancy 15.05%

HELP!!!

I have a 500gb external hard drive which, up until a few days ago, was working absolutely fine.

When I would plug it in to my laptop the device was found under 'my computer'.but would not open. Instead when I tried to open it my computer froze and the 'not responding' message was shown, resulting in a forced close of my computer. Now when I attach the hard drive and open 'my computer' the hard drive does not show at all, but 'my computer' still shows the message 'not responding', resulting in a forced close.

I've been on to a couple of forums already and tried the route of right clicking 'my computer', 'manage' and 'disk management'; but the hard drive does not appear there.

I'm at a total loss what to do and would massively appreciate your help as I have backed up company data on to this hard drive.

Thank you in advance!
 

A:External hard drive not showing in My Computer

Hey pcrquals. I would try the drive in another pc to narrow down where the problem is, a problem with the drive itself, or a problem with the pc recognizing the drive, which might be a problem with the USB port(s) or with the USB drivers. Does another USB device like a flashdrive work when plugged into the same port?
 

http://www.techspot.com/community/topics/external-hard-drive-not-showing-in-my-computer.191206/
Relevancy 15.48%

I have an external WD hard drive, I accidently removed the network file and folder sharing componet. Now when I go to access my hard drive it tells me that access is denied. I dont want to lose the data. Is there a way to restore this opion and gain access? PLease help. I oringially was trying to limit access to this hard drive.
 

A:WD external hard drive

Google How to Take Ownership for the instructions your version of Windows. Try taking ownership of files/folders on the drive
 

http://www.techspot.com/community/topics/wd-external-hard-drive.200328/
Relevancy 15.05%

We have a new Dell Precision laptop but cannot get two of our USB flash drives (both Lexar Jumpdrive SecureII Plus) to work. They work on our other computers. We can connect other USB devices to the new laptop, including an older flash drive. Strangely, if the problem drives are plugged in before the computer starts they will open properly - but I cannot remove them and plug them in again later.

They do beep every so often. USB Mass Storage shows up in Device Manager, with the warning exclamation. Disk Management will briefly show a disk (1 or 2) with "no media"; sometimes it will disappear then reappear for a second or so.

I have checked for USB driver updates, uninstalled and reinstalled USB hubs shown in Device Manager (though I'm plugging directly into the side of the laptop). I do not understand what would cause these drives only to not work with this computer only.
 

A:Some usbs drive fail to open on newest computer only

I forgot to mention: the laptop is running Windows 7 Pro.
 

http://www.techspot.com/community/topics/some-usbs-drive-fail-to-open-on-newest-computer-only.199812/
Relevancy 15.05%

You saved an old hard drive (or three) from previous computers and now you?d like to get at the data on them. Is there an easy way to access the data without cracking open your current computer and mounting the hard drives inside?

Read more
 

A:How to Get Data Off an Old Hard Drive (Without Putting It in a PC)

very good. I was trying to explain this to someone. Now I think I will just send then the Web Page.
 

http://www.techspot.com/community/topics/how-to-get-data-off-an-old-hard-drive-without-putting-it-in-a-pc.200129/
Relevancy 17.63%

I have no idea why this happened, after the update none of the ports on my computer work after booting into windows. bios was updated before this and all was fine. checked in bios if ports were enabled. still no joy. help!!!
 

http://www.techspot.com/community/topics/all-usb-and-ps-2-ports-dead-after-msi-motherboard-driver-update.200108/
Relevancy 15.48%

I have a Sandisk 16GB flash drive that is write protected, cant find any solution!
After trying to format the drive I tried to remove the write protection with diskpart and now the drive wont appear in my computer but is still detected in disk management. Also it keeps coming up as local disk G for some reason.

All suggestions appreciated
 

A:USB drive Write protected

Is there a partition for it in Disk Management? You need at least 1 partition on the drive.
 

http://www.techspot.com/community/topics/usb-drive-write-protected.200102/
Relevancy 14.62%

I've been having this problem for a few months now. I recently built my own computer, having been on a lap top for a couple of years, and found my old external hard drive. I plugged it in to the new computer, and it said something about needing to be formatted, which I promptly did due to nothing of importance being on it. I went to sleep, and woke up to see that it couldn't be formatted.

This is where my issue begins. It no longer appears in Computer, or Disk Management. Disk Management won't even load if I have the drive plugged in. There seems to be no way at all to format the drive, since Computer, and Disk Management both don't load when the drive is plugged in. Any help?
 

A:External Hard Drive is Not Recognized in Computer or Disk Management

I have a similar problem. I have an old external hard drive and it wont showed up or open under my computer or disk management. I tried to open it under disk management but there is no way to be found. The files F, G, H, etc are empty. I really appreciate an extra help here since I am not a computer expert. Thank you!!!!
 

http://www.techspot.com/community/topics/external-hard-drive-is-not-recognized-in-computer-or-disk-management.191966/
Relevancy 15.05%

Hi I m having a problem that I gather is fairly common with Windows machines but I haven t been able to find the same case in other threads nor a workable solution among similar cases I have two Windows computers the main laptop on Win and a hybrid tablet on Win I would like drive Win8.1 Trying connect to network to a for both devices to be able to access each other via my home network So for both devices I ve set the network settings to home private I turned on file sharing and discovery and even joined both devices to the same homegroup The end result is that my Win tablet can access my Win laptop both through the homegroup and through direct network access The problem is that my Win laptop cannot do either of those with regard to the tablet in all Trying to connect to a Win8.1 network drive cases I get the network error message that I cannot access the location and should check it for spelling To try to solve this issue I have attempted -Turning off the Windows firewall on my Win tablet -Looking around to see if I could find my Win tablet to unwittingly belong to some sort of domain have not been able to figure that out The odd thing is that I also tried to test out the network by setting up iTunes on both devices and setting them to share their music libraries via home share and sure enough both devices could access each other s libraries Similarly I was able to access my tablet from my Win laptop through a Remote Assistance invitation Would very much appreciate any advice I can get here Thanks in advance nbsp

A:Trying to connect to a Win8.1 network drive

Which Windows 8.1 tablet is this Pro or RT? RT your can't not x86 or x64. Pro you can. Disable Homegroup. Use Workgroup and call it something other than Workgroup like: DANET for example
So do this on laptop and tablet. On laptop make sure the folder is shared out to you the admin or your name example Dan.

So you should have local account on your system called Dan with admin rights. Back on the tablet side you need to create a local account. Did you setup Microsoft account so your login with that account only. You need to create a local account and start using that. It can be done to access the Microsoft account while being on local account while your at home.

If away from home then sign on to Microsoft account to access the cloud features. Or still use the local account and have Microsoft account to access store and skydrive (aka onedrive).
 

http://www.techspot.com/community/topics/trying-to-connect-to-a-win8-1-network-drive.199866/
Relevancy 14.62%

How serious is this? I'm running on a Dell laptop with a Intel(R) ICH9M-E/M SATA AHCI Controller.

It is saying that I should back up all of my important files because of possible hard drive failure.

PLEASE HELP? I don't know how to fix this because I don't know what it means.
 

A:Hard drive is reporting a Smart Event error message

It telling you your hard drive is on its way out. You can try running a check disk and see if that helps. But to be on the safe side you should back up your personal files.
 

http://www.techspot.com/community/topics/hard-drive-is-reporting-a-smart-event-error-message.199432/
Relevancy 14.62%

Hello all I made a post regarding the performance failing of one of my supply power affect hard performance? drive/computer Faulty hard drives The conclusion we came to has unfortunately not resolved my problem and I am beginning to think my Power Supply may be the culprit Faulty power supply affect hard drive/computer performance? ------------------------------------------------------------------------------------------------------ Before I go into details here is my current Hardware Q GHZ GIGABYTE EP -DS R GB PC mhz x gb x gb Nvidia GTX mb requires x pin power adapters Asus Xonar soundcard requires floppy power adapters Windows x Jeantech W PSU modular PSU PCI-E nodes and nodes for other devices gb HDD operating system tb HDD data tb HDD data tb HDD data - added recently ------------------------------------------------------------------------------------------------------ My original problem in brief Upon accessing certain files in one of my TB drives I hear a distictive quot click lockup halt quot sound and then the entire system crashes first the drive will become inaccessible then windows explorer will crash followed by the mouse and eventually a BSOD after a minute ------------------------------------------------------------------------------------------------------ I bought a new TB a month ago to replace what then I thought was a failing TB drive Since the problems have become quot random quot and happen across all four drives tb tb gb tb I am now considering my PSU the culprit Jeantech Absolute w It seems logical to me Sometimes while performing tasks which put stress on several HDD s at the same time my computer is quot choking quot running as fast smooth as it should but with sudden freezes with those HDD quot click - stop - restart quot sounds Booting into windows is failing from time to time freezes on the quot starting windows quot screen or DISK BOOT FAILURE Insert system disk The PSU is modular - could certain quot plugs quot in my PSU are faulty I haven t tested this extensively but in some cases when the computer is not starting up at all using different power ribbon cable combinations seems to help Also I had to remove my DVD drive completely when I first installed the new TB I bought and I don t think my computer will start at all with it plugged in anymore so my PSU MUST be having a hard time coping with all the components If it is of any relevance I use an Nvidia GTX which requires x PCI-E pin power connections hard drives power is supplied via THREE modular ribbon power cables - two HDD s share power from the same ribbon cable lastly worth noting I use an asus Xonar sound card requires floppy power connector several symptoms suggest the PSU any thoughts nbsp

A:Faulty power supply affect hard drive/computer performance?

a 1000Watt shouldn't have any problem coping with the components that you have, i would recommend that u borrow a power supply from a friend and try it out on your computer, maybe the power supply is old and is not supplying proper voltages on all the rails....
 

http://www.techspot.com/community/topics/faulty-power-supply-affect-hard-drive-computer-performance.160966/
Relevancy 15.48%

I opened up the optimization window to see if one this is going drive what sure Not with on of my hard drives needed to be defragmented and I found a weird drive that the computer is saying is fragmented Does anyone have any idea what is going on with it My laptop used to have a fast to start up time around - for the laptop to restart and load up all starting programs Now its being really slow where its taking minutes to restart and load all the start up programs Thinking this might be related to a fragmented drive I checked the optimization and found a weird drive segmentation I don t know if its supposed to be there and if its not what to do about it About a week ago Comoto had asked me whether or not to allow a program to access the internet The program name looked similar to that drive name however Comodo specified that it was a safe file so I did not Not sure what is going on with this drive block it from accessing the internet I do not know if these are related but I thought I would mention it So I guess my questions are Does anyone know what is going on with that drive Does anyone have any suggestions to return my start up back to near its Not sure what is going on with this drive original speed Windows Intel Core i - MQ CPU GHz GHz GB ram -bit Operating System x -based processor Lenovo y p laptop nbsp

A:Not sure what is going on with this drive

You have a single hard drive broken up into 5 partitions. One of those partitions is showing trouble. With the symptoms you describe here, I believe that the hard drive is going bad. Back up your important data and prepare to replace the hard drive. You may be able to perform a factory restore but you will loose all your personal data doing this too. If the factory restore fails, this will tell you that the hard drive is definitely bad
 

http://www.techspot.com/community/topics/not-sure-what-is-going-on-with-this-drive.199269/
Relevancy 15.05%

I deleted a folder with about 30 gigs of stuff in it from my 500 gig external hard drive about a week ago. I haven't done anything else with the drive since then. The folder was too large for the recycle bin so windows just automatically deleted it. I've tried recovering the files with Recuva and Puran File Recovery, but neither of them have been able to locate the files. Does this mean I will not be able to get them back, or is there something else I can try?
 

A:Recover files from external drive

To recover data you can install Pandora Recovery in windows or use PhotoRec in Linux.
 

http://www.techspot.com/community/topics/recover-files-from-external-drive.199187/
Relevancy 15.48%

Sir, my 500 GB Portable Seagate Hard drive is not being detected anymore in My Computer but it shows up id Disk Management. When I start disk management, it tries to initialize my portable drive but reports an I/O error. Also it shows my hard drive as an unallocated and unknown device. Is there any way I can get my disk back to use without losing my datas in it?
 

A:Hard drive not detected

Not very likely, at least not easily. Try it with another computer before you do anything further. Also try a different USB cable.

If those both fail, you might have some luck breaking open the case and getting at the drive itself and then placing that in an external dock..
 

http://www.techspot.com/community/topics/hard-drive-not-detected.199143/
Relevancy 15.48%

Is this the right Forum I have an older Compaq nc with a failing Fujitsu G HD that I decided to replace with a SSD PATA IDE drive Transcend TS GSD GB IDE Hardware Agere Systems AC Modem Broadcom NetXtreme Gigabit Ethernet Intel R Ultra ATA Storage Controler - CA HL-DT-ST RW DVD GCC- N DVD Drive ATI MOBILITY RADEON Series Display Adapter Intel R PRO Wireless BG Network Connection O Micro OZ M MemoryCardBus Controller Intel R Pentium R M processor GHz Started machine with OS recovery disk to load windows XP Loaded SP and all drivers Computer seemed SSD Hard Drive installed OK at first Then every time it is started up Windows loads up SSD Hard Drive installed to the background and stalls It takes another minutes or so to get the task bar and systray Also after a minute or so a window opens to tell me that a driver for some hardware has successfully loaded but the list of the hardware is blank Then the CPU maxes out the fan starts and the machine slows way down When I look at processes in Task Manager there is a svchost that is using of the CPU cycles When I kill this svchost process the machine runs much more in line with what I expected What do I do to fix it I need for this computer to run with the SSD drive nbsp

A:SSD Hard Drive installed

Is the SSD seen by the bios? The OS recovery disk is in a CD drive?
 

http://www.techspot.com/community/topics/ssd-hard-drive-installed.198946/