Windows Support Forum

Netgear C3000 speed issue

Q: Netgear C3000 speed issue

So i got a Netgear C I live in a tenant apartment building so not huge We ve issue speed C3000 Netgear been using the Wifi with good Mb speed until a few days ago the speed tests went down to between - Mb s The TW tech came out tried it on his modem and an actual Time Warner modem and it was the same Perfect wired speed terrible Wifi speed He thinks there s some Netgear C3000 speed issue kind of new interference somewhere but can t pinpoint it exactly understandable I live in an apartment with other roommates each are online gamers and streamers that s people using the same internet Tried connecting only PC to wireless and still same results Tried different channels Nothing So before we go and lower the internet speed Is there a good relatively cheap router modem that doesn t pick up interference Expensive router modem that doesn t pick up interference Or should I just get a modem router with a bunch of Ethernet switches and a bunch of Netgear C3000 speed issue Ethernet cables ft to wire around the apartment I m at a loss and I really don t want to limit the internet between gamers xD nbsp

Relevancy 100%
Preferred Solution: Netgear C3000 speed issue

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Netgear C3000 speed issue

The following may give us enough information to make a recommendation ...

Please attach a screen shot of the Networks page (don't collapse the Radar, Connection or Signal History) of the Xirrus Wi-Fi Inspector. If you need help with a screen shot see TSG Posting a Screenshot. FWIW to take screen shots with Windows Vista or latter I prefer to use the built-in Snipping Tool.

https://forums.techguy.org/threads/netgear-c3000-speed-issue.1153594/
Relevancy 72.67%

I Live in India(Madhya Prradesh,Indore). I have Tikona Broadband Connection and Netgear WNR612v3 router.
While I am connected through direct ethrnet then I get full 4mbps speed and while I am connected through router then the final speed is 4mbps but with many fluctuations. Please Help!!!
 

https://forums.techguy.org/threads/speed-issue-with-netgear-router.1156260/
Relevancy 58.05%

I just 'inherited' an HP C3000. I found the installation manual online. But now I need to know how to access the blades for loading software, etc. Is there another manual or manuals I can get?  Thanks,Tom TownsendFairmont High SchoolKettering, Ohio 

A:c3000 manuals?

Tom, HERE IS A PAGE that has many different manuals concerning the line of computers.  See if one of them ilustrare and explain what you are seeking.

http://h30434.www3.hp.com/t5/Business-PCs-Workstations-and-Point-of-Sale-Systems/c3000-manuals/td-p/5597596
Relevancy 53.75%

Hello.
I have a 20mb Cable connection (Virgin Media), and I recently bought a Netgear WGT624 v2 (Cable version, not DSL), so I can use wireless with my laptop, and hook up my Xbox 360.
When using the router, my connection speed never goes above 10mb speeds (half of what I am supposed to get). When I remove the router, my speed goes above 10mb.

Neither the Laptop nor the Xbox 360 are turned on, so they cannot be causing the problems.

Does anyone know if there is something I can do to get the speeds up? Maybe something I can set in the router config?
 

A:Netgear Router Limiting Speed

I couldn't find the link where there was a bunch of routers tested for their throughput performance. But just because a router has a 100 Mbit WAN port doesn't mean it's going to be able to route packets at that speed. The internal processor still has to process each packet going in and out of the router. Here's a link with a few routers tested: http://www.smallnetbuilder.com/content/view/30280/51/1/5/

In the chart you'll see WAN throughput both up and down. The FVS336, FVX538, and FVS124 are all in Netgear's SMB line of routers. The FVX538 is Netgear's top dog router which is the only one capable of reaching near 100 Mbit performance. Now look at the FVS124, it just barely breaks 10 Mbit/s.

So the performance you're getting might be indicative of really how fast that router can forward packets.
 

https://forums.techguy.org/threads/netgear-router-limiting-speed.706108/
Relevancy 53.32%

I have 20Mb broadband from Virgin and Motorola Surfboard modem connected to a Netgear WGT624V3 router.

Our household has 2 Vista laptops and an XP Desktop, all of which connect wirelessly to the internet.

However, none of the connected devices, even when only one is in use, can achieve a download speed of better than 3Mb.

But, if I connect any of these devices directly to the modem, I get consistent download speeds of 16-18Mb.

So the router would appear to be the weak link.

I've updated to the latest router firmware, and I've checked the Netgear website, this forum and the wider web for ideas, but have found nothing useful.

Perhaps I just need a better router, but I'd like to try to get this one working.

Thanks in advance for any suggestions.
 

Relevancy 52.89%

Ive got a new NETGEAR WG511 Wireless PCMCIA Card 54Mbps,
WinXP Home SP2
A Wireless Network using NETGEAR Router...

I have it up and running...BUT

when connected it shows speed of around 36/48Mbps (even if right next to router)
Iam using the laptop in same room 5ft away and when i open firefox it slows down to 11mb

Whilst this wud be ok for speed it seems that its not...My internet is 2Mb and 0.5Mb after 6pm
but with this wireless card its just a little faster than dial up (70-90kbps)

what can this be? ive enabled most internet related services..?

thanks
 

A:Solved: NETGEAR WG511 is slow (dial-up speed)

Hi,

I maybe misunderstanding but if your ISP limits you to a 512K connection after 6pm 70-90Kbps is slightly faster than you should be getting.

The connection speed to your router won't matter (unless it drops below the ISP connection speed).
 

https://forums.techguy.org/threads/solved-netgear-wg511-is-slow-dial-up-speed.596524/
Relevancy 51.17%

Hi I ve been experiencing some problems with my RangeMax wireless NETGEAR router model WPN in terms of wireless connectivity When directly plugged into my router i e using ethernet cables the download and upload speed in mbps - megabytes per second appear to be working correctly where we register average download speeds of - mbps and to mbps for upload speeds as shown on speedtest net However our wireless devices i e laptops and Nintendo Wii are not picking up the same download speeds but the upload speed is fine The problem is that the download speeds of the wireless devices are comparatively low where speeds of to mbps are a commonality We ve tried resetting the router pushing that small button at the back of the router using a pin and WPN824 download for Desperate problem mbps Solved: NETGEAR assistance!!!! speed - have a new -character key password We ve also tried simply unlugging the power cable to the router with disconnecting lengths of about seconds to over a minute for separate attempts It is also worth noting that the router occasionally disconnects and re-connects on irregular intervals and we have many wireless devices attached to the router though many of these are not in use and are very often disconnected from the internet so I do not think the router is being overwhelmed I am currently paying for mbps downloading speed and mbps with respect to uploading though the mbps downloading speed will likely only be registered if directly connected to the black box modem As such values of to mbps for downloading speed for a wireless device would be considered quot normal quot Why would our wireless devices not pick the correct mbps download speed Is it possible that there Solved: NETGEAR WPN824 mbps download speed problem - Desperate for assistance!!!! is a setting on the NETGEAR SMARTWIZARD page that is preventing this Any assistance would be greatly appreciated Thank you for your time Trav nbsp

A:Solved: NETGEAR WPN824 mbps download speed problem - Desperate for assistance!!!!

https://forums.techguy.org/threads/solved-netgear-wpn824-mbps-download-speed-problem-desperate-for-assistance.1068551/
Relevancy 49.02%

Hi I have a Netgear GSM Layer managed switch that is not booting up properly Recently i have tryed updating the firmware to version then tryed ver but with the exact same result the switch Netgear issue GSM7324 keeps booting continously with the following output Timebase MHz MEM MH NetGear Boot code Flash size MB Testing MB SDRAM Pass Unknown PCI devices PCI devices found - Motorola MPC Select an option If no selection in seconds then operational code will start - Start operational code - Start Boot Menu Select Unknown box topology The firmware files are being sent successfuly and are properly saved on the FLASH section of the switch I know that the PCI device listed as the quot Motorola MPC quot should be one or both of the processors inside of the Switch but which can be the quot unknown quot PCI device reported I tryed searching on the netgear site but got no information at all about the problem This started all of a sudden while the switch was online working perfectly It is being used as a regular switch no DHCP or IP address specified for it None of the Layer features are being used routing DHCP Vlans etc Any help is appreciated Thanks nbsp

A:Netgear GSM7324 issue

Hi again !
I've checked as well t he SDRAM that the router has, it works fine.

Any ideas?
Thanks !
 

https://forums.techguy.org/threads/netgear-gsm7324-issue.790513/
Relevancy 49.02%

Hi guys I ve had my NetGear WGR v wireless router since two years ago and I rarely Wireless issue NetGear used NetGear Wireless issue it because it kept disconnecting me So now I want to put it to use at my friends house as he needs a router but the wireless does not work on it The firmware on it is updated The service provider is Comcast cable modem is Motorola I ve tried unplugging the cable modem and plugging it back in then plugging into the router etc but this doesn t work The wired connection works fine on the router My friends laptop is however able to detect the wireless signal but when he tries to connect to it it s not able to connect I played around with restarting his laptop turning the cable modem and router on off fiddled with the router settings turning the firewall off turning the WPA security on and off etc but no luck I also tried that godforbid Setup Wizard CD that is provided and not only did it not solve the issue it changed around the wireless setting windows wireless to thinkpad accesspoint and did something to the ISP so that my wired connection didn t work Thus I unplugged the cable modem and plugged it back minutes after gaining back my wired connection Back to square one Is there something I m missing that s causing the wireless to not work nbsp

A:NetGear Wireless issue

Some things you can try here.
Change the channel on the router, I like channels 1, 6, and 11 in the US.
Update the firmware to the latest version available on the manufacturer's site.
Reset the router to factory defaults and reconfigure.

Many times these measures will resolve a lot of intermittent issues.

Since you've updated the firmware, that leaves changing the channel and doing a complete factory reset and reconfiguration.

If neither of these get the wireless working for machines that have no issues with other wireless networks, the wireless capability of that router may simply be broken.
 

https://forums.techguy.org/threads/netgear-wireless-issue.706655/
Relevancy 49.02%

I am wondering if anyone can help me out I am a total novice when it comes to networking ill explain my situation I live on a large farm complex and the internet fibre comes in to an outbuilding from the wireless router a cables runs to the main house which goes into a splitter maybe called a switch this then has a hardwire to my dining room which has a netgear range max which provides wireless to the kitchen and half of the ground issue Network/Netgear floor There is then another cable from the same switch that goes to another range master on the first floor landing I have another cable going from that switch which goes to a port in my office However I wanted to plug another similar range master in at this port I haven t bought one however was wondering if there is a configuration I could use to use a netgear DGN wireless router by switching off the modem side and just using the ethernet ports wireless side of the device Any advice if this is possible Was just wanting to save some Also I have noticed that since my hard wire to my office has been plugged in the internet wireless side seems to be dropping out or freezing lots Is there anything that I have set up in the description above that could be the issue Thanks John nbsp

A:Network/Netgear issue

If i get this right then its
Line> Main Modem> Switch> Router
and you want to do this
Line>main modem> switch> <Router><Router>?
or do you want to set the second router as a wireless signal extender?
as far as i know this would be a possible option as you cant set a 2 routers to work on a dhcp or pppoe at the same time.
one would have to be bridged while setting it up with the router that is negotiating the ip adress.

I remember doing something like that long ago but i cant remember the steps for the dlink or netgear. the firmware i know
is probably way out of date.
 

https://forums.techguy.org/threads/network-netgear-issue.1110264/
Relevancy 49.02%

Ok, so heres the scoop.

I have an old dual 108 Netgear router a/g that I am trying to connect to my dsl modem.

I can connect throught the moden to pc just fine and dandy however when I put the router in the middle it wont connect on the pc but it displays the wireless g I am trying to setup too. The router shows that it has no IP address i have tryed resteing the stack and have the router configered for PPPoE with my dsl username and password but still no dice.

I really dont want to have to go buy another router today if I dont have too if there is something minor I am missing...

Please help! Thank you!
 

Relevancy 49.02%

I am a service tech for a cable company, and have noticed that whenever I have a pc that has had either a older wireless adapter, or a broken adapter on it.....unless I install the exact same model, The wireless utilities (whether windows or Netgear) will expect a 8-digit WEP key....you can not reset this......the only way around it that I have found is to disable security....is there a way to correct it and still use security?
 

Relevancy 48.59%

I have four computers that are connected at any given time to the home network. I believe have two issues here.

The first, all of the computers connect and surf the Internet at very slow speeds. Sometimes it seems like I'm back on Dial-up. My MacBook (which is my main computer I work from) connects to the Internet with an Ethernet cable directly into the DSL box. Even if I turn the other three computers off in the office I still run slow on the Internet. Any thoughts on how to improve this? My DSL provider says its an issue with our setup. Great thanks for the help!

Second, my Mac overall seems to be running very slow. I have over 14GB of available space so I would not think that the computer is in overload.

Any support would be greatly appreciated.
 

A:Moving at turtle speed - Internal Network issue or DSL issue?

If you have more than one computer, and all exhibit the same symptoms, it's hard to believe they're all bad.
Pick one that doesn't exhibit any other issues and do this:

Register at DSLReports and run their Line Quality Tests. It's best to run this test with a direct wired connection to eliminate any wireless issues from the results. It's useful many times to run this test several times, and we'd like to see each of the results. Post the results link from the top of the test display page for each test run here.

The link to post is near the top of the page and looks like:

If you wish to post this result to a forum, please copy/paste this URL
http://www.dslreports.com/linequality/nil/2357195 <- sample only, yours will obviously be different!
and your IP will be disguised.

Copy/paste that link here.

Note: You will have to enable PING (ICMP) request response either in your router (if you have one), or in your computer's firewall for direct modem connections. This is very important to get the most important part of the test to run.
 

https://forums.techguy.org/threads/moving-at-turtle-speed-internal-network-issue-or-dsl-issue.773177/
Relevancy 48.59%

Hi everyone I m new here so I apologize if I don t post correctly at first DSL / Netgear Issue Wireless WGR614v6 AT&T I have a Netgear WGR v and an AT amp T DSL connection I had the quot Google Virus Netgear WGR614v6 Wireless / AT&T DSL Issue quot that redirected all my internet search Netgear WGR614v6 Wireless / AT&T DSL Issue traffic to malicious ad Netgear WGR614v6 Wireless / AT&T DSL Issue sites so I restored my router and modem After this I got the modem reconnected hooked up logged into AT amp T and am fully able to access the internet using an ethernet cable from the modem to my laptop The problem is with the Netgear I can log into the and access my settings it will recognize internet set up a network but will not actually relay the internet As long as the modem is plugged into the quot Internet quot port on my router the router will NOT allow any internet connection even though in the guided setup wizard it says it does indeed recognize an internet connection as being found Here is the odd part If i unplug the ethernet running from my modem to the quot internet quot port on the router and instead plug it into one of the quot LAN quot ports on the router I can then connect wired but not wirelessly to the internet via the router This is what is confusing me -- the internet works the router can relay the internet WIRED when connected to a LAN port -- not the internet port but it just can t seem to relay it correctly I know both parts work they were working this morning it s just a matter of a setting or information I have wrong somewhere Anyone who can help me out would be greatly appreciated Thanks so much in advance and if I can be any clearer or provide more information PLEASE just let me know nbsp

A:Netgear WGR614v6 Wireless / AT&T DSL Issue

The issue here is your "modem" is really a modem/router, and it's using the same 192.168.1.x subnet.

Login to the Netgear web setup and change it's base address to 192.168.2.1, and it'll start working.
 

https://forums.techguy.org/threads/netgear-wgr614v6-wireless-at-t-dsl-issue.934787/
Relevancy 48.59%

Basic background - using above router to connect both Wireless devices New WPN824 Netgear Connection - V2 Issue as well as desktop directly connnected into the router ISP is Time Warner cable modem For months only issues we ever had were related to TW issues No changes made to the internal network Netgear WPN824 V2 - New Connection Issue About a month ago I started experiencing some slowdowns on my desktop but figured this was more of TW quot enhancing quot the network without giivng owarning However the problems persisted and I Netgear WPN824 V2 - New Connection Issue would usually re-boot the cable modem followed by the router and for a while the speed would hold It did not seem to affect the wireless computers connected though they are used less often I ve connected different desktop PC s in the past month and had the sam eissues I ve rpelaced every ethernet cable to make sure it wasn t a simple cable issue and have also used all ports in the router I upgraded to the latest router firmware yesterday It seems to work for a while but after going to bed and getting up next morning no internet connection and then the reboots to fix My power saver settings on my desktop PC are turned off I am using an older version of ZOnealarm due to some issues I had with their newer versions not allowing me to shutdown WInXP version I think I have the settings to lock internet activity completley disabled in Zonealarm to ensure it does not lock out the internet which in the past would cause reconnnect issues When I connnect directly to the cable modem I have no issues with my desktop It seems to be an issue only with the Netgear router and the direct LAN connections Was curious if anyone had experienced similar behaviors Thx nbsp

Relevancy 48.59%

Ok here is my problem In the last few days my wireless G mainly on cell phones keeps loosing connection while issue WNDR3700 NETGEAR Wireless my Wireless N is staying connected with no problem I have no idea what caused it I have a friend here from europe and they use their phone with my WIFI and they were connected fine for about a week no problem All of a sudden the wifi on G has been throwing them off along with my cell phone now In the previous year or so since ive had this router i have had no issue Any idea what could have triggered this I have reset the router settings changed settings flushed DNS changed the MTU size no luck It is now starting to bother me that i my self cant connect my wireless internet but my N is staying connected with issues PLEASE help Do you think it could be their phone throwing off some settings sounds crazy but ill believe anything at this point Also my hard wire connection to my pc is not loosing connection either

A:NETGEAR WNDR3700 Wireless issue

  
Quote: Originally Posted by sotorious


Ok here is my problem. In the last few days my wireless G mainly on cell phones keeps loosing connection, while my Wireless N is staying connected with no problem. I have no idea what caused it.

I have a friend here from europe and they use their phone with my WIFI and they were connected fine for about a week no problem. All of a sudden the wifi on G has been throwing them off along with my cell phone now. In the previous year or so since ive had this router i have had no issue.

Any idea what could have triggered this?

I have reset the router, settings, changed settings, flushed DNS changed the MTU size no luck.

It is now starting to bother me that i my self cant connect my wireless internet. but my N is staying connected with 0 issues. PLEASE help. Do you think it could be their phone throwing off some settings? sounds crazy but ill believe anything at this point.

Also my hard wire connection to my pc is not loosing connection either.


After reading many reviews about this router at Amazon it seems that the wireless G dropout problem is caused from using the "Auto channel" setting in the routers set up page for wireless. Some reviews are great, many others complain of drop out connection problems. Amazon.com: Customer Reviews: NETGEAR N600 Wireless Dual-Band Gigabit Router WNDR3700

I would try using the manual channel setting and look for a clear channel using a WIFI scanner like Xirrus. Wi-Fi Inspector | Xirrus

http://www.sevenforums.com/network-sharing/231520-netgear-wndr3700-wireless-issue.html
Relevancy 48.59%

This issue RangeMax NetGear installing is really strange of an issue for me I have a wireless adapter WPN and well the only issue is installing it The device will work eventually it NetGear RangeMax installing issue just needs to be installed But every time I try using the latest version from the manufacturers website it will not work The issue is probably a lot to do with the driver In device manager it always comes up as something with a yellow over an icon The drivers for this device are not installed Code A service installation section in this INF is invalid To reinstall the drivers for this device click Reinstall Driver Click to expand I have felt the two websites here useful somehow http www keil com support docs htm http www fixya com support t -service installation section in inf So maybe it is something to do with C Windows inf and an inf file somewhere I can t find it with the help of seeing what file got created around the time I installed it date created or by looking at the filename nbsp

A:NetGear RangeMax installing issue

Well, if you look at the .INF files supplied with the driver, can you find any of them with a Windows search? I presume you looked in the INF folder and didn't find it? Did you look in the event log to see if additional information may have been logged? How about an install log, maybe there's a clue there?
 

https://forums.techguy.org/threads/netgear-rangemax-installing-issue.692846/
Relevancy 48.59%

ISP - Adelphia Modem - SurfBoard SB Who names these - - Router - Netgear RP OS - XPHome Well this has irritated me for the last hour so I m giving up thinking about it I had this router working for about six months until it started randomly dropping the connection so I simply unplugged it and connected directly to the modem Now I have a second Well fourth but it s going to be connected to port computer that I want to get online with at the same time and do some updating An older Medion that my aunt Issue. RP614 Connection... Netgear had for her kids that I rescued after they somehow ruined the OS - Fresh XPHome install on it now so eh So I hooked it up like new today and it ll gladly find an IP but it ll be damned before it ll let either computer connect to the internet The IP addresses are statically set for the LAN to and default gateway Netgear RP614 Connection... Issue. kept obv My laptop connects just fine directly with the modem but the desktop I just rescued doesn t so that s another issue I ll have to work on My aunt s in-laws brought it to some quot computer guy quot they know who among other things took out the nice sound card I put in for them when the on-board decided to take a dump quot Having two sound cards ruins the motherboard quot - Referring to the on-board sound being a card on its own that wasn t working anyhow and told them that quot All the games they play give them viruses quot Referring in a wtf way to the store-bought games they played Netgear RP614 Connection... Issue. without Netgear RP614 Connection... Issue. even going online once since it stopped connecting to the internet after the first time it went to those quot computer guys quot and got toyed with reformatted who knows what else when they had a spyware virus issue that they didn t want to quot bother me quot with But that s nearly irrelevant as I haven t really even gotten to that computer yet That was more of a quick mini-rant Due to the fact that I m halfway to a Network Administration degree I get angry when they don t even ask for my help and get even more frustrated when something I m nearly SURE should work refuses to So back to the issue at hand - I can see that it got the IP via the admin console only after MAC spoofing I haven t tried to get everything to work without MAC spoofing again anyhow I tried once and decided to give spoofing a shot but I have to run off to work in about minutes so I ve given up on it for now and was hoping I could get an extra brain or two thinking along with me Sorry for the long ramble but thanks for reading it I hope someone can come up with something I didn t couldn t And on a totally random note as I already have your attention will a GeForce FX be sufficient for Oblivion Thanks guys gals tentacle-creatures - Rick nbsp

A:Netgear RP614 Connection... Issue.

It sounds like your ISP requires a registered MAC in order for it to function properly.

Since your laptop works connected directly to the modem have you input that laptops MAC into the router for it to get an IP and then see if the desktop and the laptop will connect out through it?

BTW on the graphics card question -

Unofficially supported graphics chipsets :
+ GeForce FX 5200, GeForce FX 5500, GeForce FX 5600, GeForce FX 5700, GeForce FX 5800, GeForce FX 5900 & GeForce FX 5950

It will work but not great -

Oh yeah and tenticle creatures rock!
 

https://forums.techguy.org/threads/netgear-rp614-connection-issue.458151/
Relevancy 48.59%

Hello Solved: Netgear issue? WPN824 all I have a Netgear WPN router attached to my cable broadband modem My PC is connected via ethernet cable and I also have a PS connected wirelessly The Solved: Netgear WPN824 issue? problem is when im on the internet I can try to view another page any page and the PC says No connection to the internet is currently available To view Internet content that has been saved on your computer click WORK OFFLINE Click try again to attempt to connect I click try again or reconnect which ever it is and it fires right back with no problems Now it doesnt do this all the time maybe or times a night and at no perticular point its just random My PS keeps the wireless signal perfectly at and is uPNP enabled in the router settings There are no problems with with this connection only the PSNetwork problems It just seems to be the PC which is having issues Has anyone got any idea why this would be happening Regards Nick EDIT In the time it took to write this post when I clicked on SUBMIT the WORK OFFLINE box mentioned above appeared TRY AGAIN and its fine nbsp

Relevancy 48.59%

hi,

im havin problems playin certain pc and xbox games online.

i have my pc and xbox set as static ip addresses

upnp turned on

use router as DHCP server off

i have all the relevant ports open and forwarded to my static pc ip address

yet i still get NAT error messages.

i then decided that i would try and place my pc in the dmz to rule out a port issue. problem is when i access the screen in my router settings and tick default dmz server, the spaces where i should enter the ip address are greyed out and i cant enter anything.

also, there is only one line for an ip address so how would i also place my xbox in dmx?

any help on this would be great.
 

Relevancy 48.59%

Hi guys,
Just wanting some help setting up a "Netgear 54Mbps WG614 v7 router".
The power is "ON"
The test is off.
The wireless is flashing
the internet "i" is on

And all the other numbers are off. eg. next to the internet there
number 1 "off"
number 2 "off"
number 3"off"
number 4 "off"



I'm trying to setup this wireless Netgear 54Mbps WG614 v7 router with a optusnet ADSL 4200 modem.
When I go threw the netgear the netgear interface a show. But I NOT have interent access.
When connteched directly to the ADSL Modem 4200 I get internet.
Oh the have a WG111v2 USB Wireless adapter.

NO internet from the router.

P.s tried reset router already. I get page can not be display.
Thanks
 

A:Router Netgear 54Mbps issue

The ADSL mdoem is probably looking for the MAC address of your computer (which had normally been the first device modem connected to till now). The MAC address is unique hardware address assigned every network adapter.
=> Meaning your netgear router has its own MAC adress
=> And the modem won't provide internet connect to any hardware it sees that's different from the your PC's MAC address (we'll leave aside why some ISP's do this)

Couple options:
a) Most routers (you'll need look at the netgear) have a setup option where you choose to either
- Use the router MAC address (default)
- Use a MAC address you tell it (in which case you tell it the computer's MAC address)
b) But probably simplest to try and force your ISP to reset the address it looks for. Either call your ISP and tell them OR for most ISPs power down your modem for about 15 minutes. Should now accept the MAC address from router. (power down/up works most of the time, if not call ISP dor mac setup in netgear
 

http://www.techspot.com/community/topics/router-netgear-54mbps-issue.120706/
Relevancy 48.59%

Hello,

I am new to this site, so please bare with me.

I have a netgear wireless router that supposedly needs the driver updated. When I tried to download the new driver onto my hp laptop, the site said that I need to "create an association in the set associations control panel"; when I tried to do this I had no idea what to set the association to. Also, I found a list under the control panel and didn't know which one to change. I am so confused!!! I just want my laptop to connect to the router. Please help!!!
 

A:Netgear Wgr614V9 Driver issue

Routers don't need drivers. Follow the instructions for the router in connecting it.
 

https://forums.techguy.org/threads/netgear-wgr614v9-driver-issue.923359/
Relevancy 48.59%

Hey guys NEXT RangeMax Issue WN311T NETGEAR So basically I purchased NETGEAR RangeMax NEXT WN311T Issue a new NETGEAR router the NETGEAR R as my Virgin Media Super Hub firewall is seriously degrading They claim their firewall is exceptional and great against DDoS attacks yet when such attacks hit the router it completely destroys the DHCP modem connectivity to Virgin Media's dedicated server cabinet at the end of my road it practically brutally murders it So I had to constantly contact VMs Technical Support on my landline to ask them to send out another replacement router as the current router from VM I have is the th replacement due to the attacks by the same person they refused to do so They just continued to claim that I don't know what a Distributed Denial of Service attack or DDoS is and that my router was being flooded by packets by means of quot downloading quot Like DAFUQ quot Downloading quot what kind of idiot do they think I am So anyway I finish setting up my network with this new router and because VMs Super Hub wouldn't allow me to change the dynamic IP or the DNS for that matter I setup my new router to use the OpenDNS DNS IPs and am now on a different dynamic IP Plus the router itself is spectacular I can do so much more with it than I could with VMs craphub and would certainly recommend it To the issue I have adapters a WN T and WN B I had the WN T in my PC and the Wireless functionality worked perfectly But when I installed it on my dads computer same OS same CPU architecture x when installing the software for the adapter on my fathers computer it just hangs and freezes up to the point where I must force restart it and then when Windows is booted it would say that the device was unable to start o O I am using my WN B for a Wireless connection even though my PC is Ethernet connected and because our Powerline adapter I had setup for my dads Ethernet connection was only giving him Mbps connection speedtest confirmed I uninstalled them the adapters are Mbps to find that when the WN T adapter did work for an hour without an issue his Internet browsing was x faster and speedtest did a good Mbps to Mbps mine shows Mbps down Unfortunately the issue remains I've tried to uninstall the software and reinstall but my dads PC just freezes up The Wireless device works in Safe Mode with Networking but not in normal boot Any help would be much appreciated Thanks Kyle

A:NETGEAR RangeMax NEXT WN311T Issue

Bump.

Could I get help with this please??

http://www.sevenforums.com/hardware-devices/284592-netgear-rangemax-next-wn311t-issue.html
Relevancy 48.59%

I was over someones house and thought I got it working ok but here is what was happening and it has stopped working again.

They have DSL to the VonageRouter to the Wireless Netgear router to a computer.
That works fine.
The Laptop they have will see the connection and when you try to connect tells you it can not connect to check the signal strength and the laptop is 10 feet away.
What I did to get it working was take it off the chanel 11 default and put it to I think 10. Which made it work. I tried 1 and 2 but they wouldnt connect.

After I left and it was working. Then it stopped working.
The owner went in and tried all the chanels and even removed and disconnected the 2 wireless phones they have to test that. Still will not connect.

What else can i be looking for to make this work?
 

A:Solved: Netgear Wireless issue

Well actually after I left it stopped working. Over the week I took the laptop to my house. Worked great on the built in wireless. So what I did was took my dlink usb wireless and installed on this VISTA machine. It works great at her house on this DLINK. The built in wireless will not work with her wireless router.
 

https://forums.techguy.org/threads/solved-netgear-wireless-issue.722186/
Relevancy 48.16%

I have a Netgear Rangemax WPN824 v2 router that I''ve been trying to use with a cable modem on a desktop PC (wired) and 2 laptops (wireless). Everytime i try to set up the network the internet works for a few seconds or a few mins sometimes, then the desktop keeps going back and forth displaying "Network cable is unplugged" then connecting, then disconnecting over and over, while the router itself lights normally for a few seconds, then all the lights are on then they all turn off then back to the normal lights. The internet doesnt work on any of the computers except for the few moments in the beginning of setting it up, but works fine when I directly connect the desktop to the cable modem without a router. Anyone know what the problem could be?

-dan
 

Relevancy 48.16%

I was just replaced a Linksys WRT G Wireless router with a new NETGEAR WNDR Wireless router I successfully installed Xboxes Wireless HP printer and a newer hp laptop All of these of devices including the laptop that isn t working were connecting fine using WPA TKIP on the old router I went to hook up the last laptop today and have been only able to do unsecured public network that does not NetGear W/ WNDR3700 Issue Atheros AR5700 allow Internet access I had read an early post that apparently the poster was able to resolve NetGear WNDR3700 Issue W/ Atheros AR5700 his her issue by upgrading drivers The system is a HP Laptop is running Vista Ultimate and the network adapter is Atheros AR with Dated I have upgrade to the new version of the driver and that did not help I reinstalled the original driver fresh to rule out a driver corruption issue I have changed the GHz channel to various channels and it is currently set on I can attempt to access other networks in my neighborhood and I get prompted to enter credentials correctly When I try to set up the network connection it prompts me with a caution screen to press the activation button on the router or by pass and manually enter to security type and pass phrase If I select either one it setups an unidentified network with local access only The router is configured correctly by the fact all of the other devices are connecting I ve reset both the device and router a few times And also able to connect to Internet with security removed I ve include the ipconfig screen shot and a Xirrus screen shots as well nbsp

A:NetGear WNDR3700 Issue W/ Atheros AR5700

Well, that appears to have a connection to the router. Are you sure a firewall isn't blocking the wireless connection?

Try some pings as well with this wireless connection.
Try these simple tests.

Hold the Windows key and press R, then type CMD (COMMAND for W98/WME) to open a command prompt:

In the command prompt window that opens, type type the following commands one at a time, followed by the Enter key:

NOTE: For the items below in red surrounded with < >, see comments below for the actual information content, they are value substitutions from the previous IPCONFIG command output! Do NOT type <computer_IP_address> into the command, that won't work. Also, the < and > in the text is to identify the parameters, they are also NOT used in the actual commands.

Do NOT include the <> either, they're just to identify the values for substitution.

IPCONFIG /ALL

PING <computer_IP_address>

PING <default_gateway_address>

PING <dns_servers>

PING 74.125.45.100

PING yahoo.com

Right click in the command window and choose Select All, then hit Enter to copy the contents to the clipboard.
Paste the results in a message here.

<computer_IP_address> - The IP Address of your computer, obtained from the IPCONFIG command above. (For Vista/Win7, the IPv4 Address)

<default_gateway_address> - The IP address of the Default Gateway, obtained from the IPCONFIG command above.

<dns_servers> - The IP address of the first (or only) address for DNS Servers, obtained from the IPCONFIG command above.

If you are on a machine with no network connection, use a floppy, USB disk, or a CD-RW disk to transfer a text file with the information to allow pasting it here.
 

https://forums.techguy.org/threads/netgear-wndr3700-issue-w-atheros-ar5700.948334/
Relevancy 48.16%

I've got a Netgear WG102 connected to a Netgear FVS114 Firewall as a DHCP server, that's then connected to a crappy BT Voyager 102 ethernet ADSL modem.

I can connect to the network fine, and it works for a while, but will then stop transfering data, and I can't get a new IP - a /renew gives me an autoconfigured address of 169.254.172.148.

Even when it doesn work, it won't do bizarre things like copy emails to my IMAP sent folder, even though it will send the emails and allow me to view new ones, even when there's no firewall turned on. This could be an internet issue, but the DHCP issue can't be.

Any ideas?
 

Relevancy 48.16%

i have a netgear wireless router that has a non secure channel set as default. well, i thought i finally managed to compuicate with the router and the network card to set up the 64 bit WEP. all was good and running fast but this morning i woke to being off line and my system picking up three other wireless networks. all that have the WEP security set. i guess i'm a little confused as to why i keep trying to find other networks. my signal shows that it is strong.

any help???

thanks
Lori
 

Relevancy 48.16%

Hello, I am having the same problems as this person.

I just didn't want to hijack a thread, basically I can connect to the router with no encryption but when I try to use any type of encryption (WPA2-PSK [AES], WPA-PSK [TKIP] + WPA2-PSK [AES] etc) I cannot connect. I tried the commands in that post and got the following:

Own Ip- I get replies no problem
Gateway - I get reply from my own ip with Destination host unreachable
74.125.45.100 - I get reply from my own ip with Destination host unreachable
yahoo.com - Ping request could not find host yahoo.com. Please check the name and try again.

Any help with this is much appreciated, thank you.
 

Relevancy 48.16%

Hi Guys I recently got my NETGEAR N MB s Wireless USB Adapter today as my computer has no Wireless card built in It can connect but after time it suddenly drops I think if I get MB s it will boost the signal range I get a really slow speed too the computer is in my bedroom and Connectivity NETGEAR Issue. Adapter Wireless USB the Router is in the NETGEAR Wireless USB Adapter Connectivity Issue. Kitchen and NETGEAR Wireless USB Adapter Connectivity Issue. I can not move the computer - so that might be an issue but my iPhone can connect but occasionally I will have to renew the lease And my previous Netbook worked until some time until a certain point If the Adapter stops working to fix it I unplug and plug it back in The Router I have is a VirginMedia MB s NETGEAR DGN SP I am thinking about getting a High Performance N Adapter instead as that has better connectivity and avoids interference etc What do you guys suggest I do Thanks for your help

A:NETGEAR Wireless USB Adapter Connectivity Issue.

Check the channel you are using on the router and get it as far from cordless phone as possible. Try to use upper channels 6-11.

http://www.sevenforums.com/network-sharing/204449-netgear-wireless-usb-adapter-connectivity-issue.html
Relevancy 48.16%

OS Windows Home Network Devices AT amp T wire HGV modem router and Netgear N WNDR Router Ports Forwarded and or Purpose Terraria Server Hosting Background Info Our ISP has recently been switched from Comcast DSL to AT amp T As a standard AT amp T replaced our old modem with their WIRE All three of the computers on the network had been connected to the Netgear router With the installation of the wire they presumably still are This had been done at another house and the quot competition Issue Forwarding Port 2Wire/Netgear quot of the wire with the original router had caused problems The wire their also refused to port forward I am 2Wire/Netgear Port Forwarding Issue not a networking expert so if information is missing let me know Here s what I did First of all I checked that the port was allowed through Windows Firewall and made sure it was an Inbound rule Then I went into the wire router At the time I thought my pc was assigned to it I ve since learnt that it probably wasn t I configured the router to forward port I left the application type blank for what I thought was my computer it was actually the Netgear router I tried doing the same using my internal ip I did the same using for whatever reason my external ip Then I did the whole process over using port None of this worked and neither did allowing all applications through the router firewall DMZplus mode Then I entered my internal ip into the address bar of chrome it took me to the Netgear router First of all and this may be important it said that my pc wasnt assigned to the Netgear this has happened twice since and it confuses the hell out of me I was somewhat relieved because it s much simpler to port forward with Netgear s UI and I had never had problems with it before Sadly both ports remain closed despite the adjustments As an addendum I also seem unable to connect to another network which is successfully forwarding the port Their Netgear router is successfully doing what mine refuses to At this point I have no clue what the problem is I suspect it may have something to do with the combination of a router and modem router I can t get help from either AT amp T or Netgear because the problem is on one hand quot out of their scope quot and on the other a quot Problem quot Any help at all would be greatly appreciated

A:2Wire/Netgear Port Forwarding Issue

You will need to set the 2wire modem up in "bridged" mode and allow your router to do the port forwarding/firewall, and PPPoE (if needed).

This link may be outdated, but a quick Google search came up with this: http://www.ehow.com/how_5160159_put-wire-bridge-mode.html

Either way, you will access it via the modem's control panel and in "bridged mode" it will pass all the public IP address, etc. to your router.

http://www.bleepingcomputer.com/forums/t/456760/2wirenetgear-port-forwarding-issue/
Relevancy 47.3%

I have DSL service with SBC Yahoo. SBC provided me with a 2Wire 1800HG modem. I recently purchased a NetGear WGR614 Wireless router. I used the NetGear installation CD to install the NetGear router. The installation process doesn't complete successfully, stalls at about 75%. I've seen chatter on the internet saying that there is a conflict between the NetGear and 2Wire but haven't seen many work-arounds suggested.

Please help!

Thanks
 

http://www.techspot.com/community/topics/issue-with-netgear-wireless-router-and-sbc-2wire-modem.54580/
Relevancy 47.3%

This is a continuation of my questions in this thread about a random BSOD I have been getting over the drivers USB RangeMax Issue Netgear wireless adapter with past month writhziden was kind enough to help me out and his last diagnosis located the problem in a set of drivers nbsp nbsp Quote Originally Posted by writhziden Code Loading Dump File C Users Mike Downloads BSODDmpFiles littleraskol BSOD Minidump - - dmp Mini Kernel Dump File Only registers and stack trace are available Symbol search path is SRV c symbols http msdl microsoft com download symbols Issue with Netgear RangeMax wireless USB adapter drivers Executable search path is Windows Kernel Version Service Pack MP procs Issue with Netgear RangeMax wireless USB adapter drivers Free x Product WinNt suite TerminalServer SingleUserTS Personal Built by amd fre win sp gdr - Machine Name Kernel base xfffff e PsLoadedModuleList xfffff Debug session time Issue with Netgear RangeMax wireless USB adapter drivers Thu Dec GMT- System Uptime days Loading Kernel Symbols Loading User Symbols Loading unloaded module list Bugcheck Analysis Use analyze -v to get detailed debugging information BugCheck B c fffff e b fffff dd cd Probably caused by hidusb sys hidusb HumGetStringDescriptor a Followup MachineOwner --------- kd gt analyze -v Bugcheck Analysis SYSTEM SERVICE EXCEPTION b An exception happened while executing a system service routine Arguments Arg c Exception code that caused the bugcheck Arg fffff e b Address of the exception record for the exception that caused the bugcheck Arg fffff dd cd Address of the context record for the exception that caused the bugcheck Arg zero Debugging Details ------------------ EXCEPTION CODE NTSTATUS xc - The instruction at x lx referenced memory at x lx The memory could not be s FAULTING IP nt ExpInterlockedPopEntrySListFault fffff e b b mov rcx qword ptr r CONTEXT fffff dd cd -- cxr xfffff dd cd rax f rbx rcx fffff d rdx c rsi rdi rip fffff e b rsp fffff dd b rbp fffff d r c r fffff e r fffff d r fffff dd r fffff r r r iopl nv up ei pl nz na po nc cs ss ds b es b fs gs b efl nt ExpInterlockedPopEntrySListFault fffff e b b mov rcx qword ptr r ds b c Resetting default scope CUSTOMER CRASH COUNT DEFAULT BUCKET ID VISTA DRIVER FAULT BUGCHECK STR x B PROCESS NAME mainserv exe CURRENT IRQL LAST CONTROL TRANSFER from fffff fbc de to fffff e b STACK TEXT fffff dd b fffff fbc de fffffa e fffff e f fffffa ed d f fffff e f c nt ExpInterlockedPopEntrySListFault fffff dd c fffff b b e a fffffa ecd a fffff abd d nt ExAllocatePoolWithTag xfe fffff dd b fffff abf f fffffa fffffa ed dc fffffa ed dc fffffa ad b hidusb HumGetStringDescriptor x a fffff dd fffff bc f fffffa d fffffa ed dc fffffa ad b hidusb HumInternalIoctl x b fffff dd a fffff bbdd fffffa ed dc fffff c a fffffa c ab b be HIDCLASS HidpGetDeviceString x b fffff dd e fffff ba d fffff c fffffa ed d f fffffa c ab f b be HIDCLASS HidpIrpMajorDeviceControl xb c fffff dd fffff f f c bb c bb fffff dd ca fffffa ed d f HIDCLASS HidpMajorHandler x c fffff dd e fffff a a fffffa bf cf fffffa bf cf fffffa ed dc fffffa ed d f HidBatt HidBattIoControl x fffff dd a fffff a f nt IopXxxControlFile x fffff dd b fffff e ced f fd efaa nt NtDeviceIoControlFile x fffff dd bb e nt KiSystemServiceCopyEnd x f f x e FOLLOWUP IP hidusb HumGetStringDescriptor a fffff b b e mov qword ptr rsp h rax SYMBOL STACK INDEX SYMBOL NAME hidusb HumGetStringDescriptor a FOLLOWUP NAME MachineOwner MODULE NAME hidusb IMAGE NAME hidusb sys DEBUG FLR IMAGE TIMESTAMP ce a STACK COMMAND cxr xfffff dd cd kb FAILURE BUCKET ID X x B hidusb HumGetStringDescriptor a BUCKET ID X x B hidusb HumGetStringDescriptor a Followup MachineOwner --------- Loading Dump File C Users Mike Downloads BSODDmpFiles littleraskol BSOD Minidump - - dmp Mini Kernel Dump File Only registers and stack trace are available Symbol search path is SRV c symbols http msdl microsoft com download symbols Executable search path is Windows Kernel Version Service Pack MP procs Free x... Read more

A:Issue with Netgear RangeMax wireless USB adapter drivers

Crossposting due to potential relevance:

I have gotten a new kind of BSOD error, which has appeared once when resuming from hibernate and then again when entering hibernate. Both have the code 0x000000d1 and the string DRIVER_IRQL_NOT_LESS_OR_EQUAL. Attached is the ZIP file. Interestingly, both of these happened when a USB flash drive was plugged into the front panel USB port while shutting down/starting up. One of the BSODs is traced back to "WN111v2w7x.sys" which I think is a wireless driver?

http://www.sevenforums.com/drivers/206360-issue-netgear-rangemax-wireless-usb-adapter-drivers.html
Relevancy 47.3%

Hi there,

Recently bought an N300 wireless adapter for my PC. I have a normal router which I usually connect to the internet using an ethernet. But sometimes I go wireless.

Initially it all worked wonderfully, without the ethernet my PC was able to pick up the wifi and I could browse, however, after about 5 minutes the bar graph in the bottom right hand corner gains a yellow triangle. Then limited access announces itself and soon enough no page loads at all.

The Netgear 'genie' doesn't show any problems with the connection, the problem seems to be noticed by the windows connection icon in the bottom right hand screen. If I try to reconnect I don't get given the network options I once had.

Hope the above makes sense...any ideas?

A:Issue with Netgear N300 wireless and dropping connection

Hi scamander

Did you try to get the latest driver from the manufacturer?

http://www.sevenforums.com/network-sharing/286648-issue-netgear-n300-wireless-dropping-connection.html
Relevancy 47.3%

Hi guys player issue NeoTV350 Networking Netgear with media hoping some of you can give me a bit of expert advice on a networking issue I have Networking issue with Netgear NeoTV350 media player a Netgear NeoTV media player rigged up to my TV and networked over the powerline with me PC Windows ultimate x Since last week whenever I try to access a file on my computer I get a message saying I need to enter my network user Id and password see attached Never have had to do this in the two years I have had the media player So I have tried the following to try and rectify the issue Switched off Firewall altogether still getting issue Moved firewall from Bitdefender to windows firewall still getting the issue Ensured all folders I am trying to access are available to share as read write Ensured sharing and network discovery was turned on in the network and sharing centre In the media streaming option I have allowed the media player access also Factory re-set the Networking issue with Netgear NeoTV350 media player media player in case that was the problem After all of the above I am still getting Networking issue with Netgear NeoTV350 media player the error message on the player when I try to access files on my PC I have also entered my network ID and password when prompted to see if that would fix the issue but I still get a login failed notification I m running out of options here as to how to fix this issue so if anyone has any advice I d really appreciate the input before I fire the pc and player out the window JangoFett

A:Networking issue with Netgear NeoTV350 media player

Welcome to Seven Forums,

If it was working prior, you may try a System Restore and back date it to when you didn't have this issue. Please see this Tutorial.

Please give us an update whether the System Restore helped or not.

http://www.sevenforums.com/network-sharing/291002-networking-issue-netgear-neotv350-media-player.html
Relevancy 46.87%

Hey all, I have a NetGear Fa311 Ethernet Adapter, (new to me) (Was still in box unopened) I just installed Windows XP Pro, SP2.

I hace a cable modem, 3 meg, Connected to a Belkin wireless router, then a RJ-45 cable connecting to the NetGear Adapter.

The card seems to have installed, I have also found the CD and updated the drivers. I then went through the network connections, and set up a network connection for a cable connection thats always on No password needed. I had it notify me if conneceted or not connected.

It says that its connected, however I cant access the internet? I threw on my belkin wireless adapter, and connected no problems, The rj-45 cable works with a different network card. But for some reason it does not for this card?

Any Ideas?
 

A:NetGear FA311 Fast ethernet Adapter Internet issue?

There was a problem with the FA311 and certain VIA chipsets.
 

https://forums.techguy.org/threads/netgear-fa311-fast-ethernet-adapter-internet-issue.565423/
Relevancy 46.87%

Hey there folks...
I have a wireless home network with a Netgear WPN824 v2. I also have an old extra Linksys WRT54GS laying around. I want to connect my Linksys router to my Netgear router and use it as a repeater to increase the signal strength in the rooms near the other end of my house. I need it to be seamless so I disabled DHCP and changed the SSID to the exact same name. I tried connecting and found ONE network with my chosen name. I connected to it however it only resulted in "Limited Access" and no internet access.

Can someone help me figure out how I can make this work please?

My system:
Windows 7
Atheros AR5B93 Wireless Network Adapter
Realtek PCI GBE Family Controller

Thank in advance...
 

Relevancy 46.44%

I recently found out that I can connect my computer to my screen using an HDMI cord. I attempted to do so, but the screen image went off the screen on all directions, so I re-connected the original serial cord. But since then I have only had 2 bars for my internet service, and I used to have all 5 bars. I've tried adjusting the antennas, raising the router higher, nothing seems to fix the issue. I dont know why this happened, and any help would be greatly appreciated. Thank you.
 

A:Solved: Dell XPS studio - Netgear-24-G - wifi issue after HDMI connect

Thanks for the help!
 

https://forums.techguy.org/threads/solved-dell-xps-studio-netgear-24-g-wifi-issue-after-hdmi-connect.1042504/
Relevancy 45.58%

Ok so my week old laptop as suddenly became really slow and CPU usage says but when I look most are with or so things with about - so I dunno what is happening Although if I system restore from before Issue Sound Issue Speed and all the Vista service pack updates happened then it is quite a bit Speed Issue and Sound Issue better though still sometimes laggy Also my sound is sometimes messed up and all fuzzy I dunno if this is linked to the speed issue or not All the specs etc Summary Product Name Aspire G Operating System Microsoft Windows Vista amp Home Premium Service Pack Processor AMD Turion tm X Dual-Core Mobile RM- System Memory MB Hard Drive WDC WD BEVT- ZCT SCSI Disk Device GB CD DVD Drive Slimtype BD E DS E S SCSI CdRom Device Video NVIDIA GeForce M GF MG GF MGS NVIDIA GeForce M GF MGS GF MG Audio Realtek High Definition Audio NVIDIA High Definition Audio Network Broadcom NetXtreme Gigabit Ethernet Atheros AR X Wireless Network Adapter HDAUDIO Soft Data Fax Modem with SmartCP UUID A E A EDE B BA E Serial Number LXARG X DD BIOS Version v Battery mAh LI-ION Processor Processor AMD Turion tm X Dual-Core Mobile RM- Cores L Cache Data Cache KB x Execution Trace Cache KB x L Cache KB x Multimedia Video Device Device Name NVIDIA GeForce M GF MG GF MGS Total Available Graphics Memory MB Dedicated Video Memory MB Device Name NVIDIA GeForce M GF MGS GF MG Total Available Graphics Memory MB Dedicated Video Memory MB Audio Device Realtek High Definition Audio NVIDIA High Definition Audio Webcam Device Device Name Acer Crystal Eye webcam Driver Version Memory Current Memory Size MB Memory Type DDR Slot Installed Size MB Slot Installed Size MB nbsp

Relevancy 44.72%

Hi All,

I recently put in a Netgear firewall, configured it, its running no problem. Then I setup a new Netgear N600 wireless router, configured it, gave it a static IP, connected to it, works like a charm. Thing is, when I try to access the web gui I receive nothing.. Is the Netgear firewall taking priority or something? I went directly connected to the netgear wifi router and double checked to make sure that there was no settings restricting administration from wifi users, etc.. Anyone have a similar setup ?

Thanks All
 

A:Netgear FVS318G FW & Netgear N600 wifi router Can't access webgui

You sure been busy! Have "seen" you all over this place.

Is the FVS318G router connected to the N600 router's WAN port or a LAN port?

If WAN have you changed one of the routers so that they don't both use the same LAN subnet (I didn't check each one, but they probably both default to the same).

If LAN have you disabled the N600's Dhcp server?
 

https://forums.techguy.org/threads/netgear-fvs318g-fw-netgear-n600-wifi-router-cant-access-webgui.993608/
Relevancy 44.72%

Should be easy!....
But I cannot get my NEW Netgear N600 router to communicate with a NEW Netgear WN 3000 RP extender.

The instructions say to press the WPS button on the extender then the WPS button on the router. No WPS button exists on the router!

The instructions also I can use any wireless network manager utility to set this up. Can't find where this is in Windows 7.

The I pad has found the NETGEAR_EXT address but won't connect. And the light on the extender does no indicate teh router is communicating with it.

Thought this process would be a simple plug and play, but...frustration!

A:Netgear N600 router & Netgear WN3000 range extender

You can see the button here pal ... Netgear call it "Push 'N' Connect"

http://www.sevenforums.com/network-sharing/233949-netgear-n600-router-netgear-wn3000-range-extender.html
Relevancy 43.43%

Hi, i am using a zoom modem. i am connected but the speed is slow. on checking the router status it is showing the downstream speed as 1728 and upstream as 448, but when i run a online speed test it gives a speed of 130kb/s and upload as 377Kb/s.On the router by gateway is showing as 217.47.151.193 and the ip is showing as
62.72.32.181.

On CMD the gateway is 10.0.0.2 and the same ip.

Please suggest what i need to do to get the same speed that is showing on router status.
 

A:speed issue

hi the problem is resolved it was the problem with the modem i bought a new linksys modem and now i am geting the same spped as showing on the router status, but will any one suggest what may be the issue with the zoom modem.
 

https://forums.techguy.org/threads/speed-issue.804691/
Relevancy 43.43%

Just got an EVGA GTX570 Superclocked GFX card. Card works like a dream! One thing though. EVGA Precision will now only let me take the fan speed up to 85%. Can anyone tell me why or how to fix the issue? I have completly uninstalled the drivers and then reinstalled them but i can still only acheve 85% fan speed.
 

http://www.techspot.com/community/topics/fan-speed-issue.161308/
Relevancy 43.43%

Hi

I have recently just got Virgin Media 10mb connection (wireless). Me and my friend share this connection, he has a mac i have a pc(laptop). It seems that my friend can get near enough full speed with downloads etc (tested on speedtest.net), my friend got nearly 10mb download speed, however I averaged at 6mb. Another example, my friend downloaded a file from a website, the speed went at about 1.5mb/s, I then downloaded the exact same file directly after his download had finished, my average download speed was 250kb/s.
My wireless card is "intel(r) pro/wireless 3945abg", it is a 54mb/s card so it should be more than capable to get the full 10mb/s that is offered to me. Any help in how to 'de-restrict' my card to obtain the full speed?

Any help is appreciated!

Thanks in advance
 

Relevancy 43.43%

HP DL145
2.32ghz x2
2gb RAM
Win7 x64


I am having a strange issue. My wired download speed is .80/mbps while my upload is 8.5/mbps. The connection is FIOS 35/35 and I am having zero issues with any other cpu on the network wired or wireless.

This is a new machine with a fresh install on it. The only 'third party' app is Chrome.

Network setup is follows:
Verizon FIOS ont box > Cisco E1000 Router > Linksys 24port 10/100 switch

This box is plugged into the switch at the end of the chain. I have swapped cables and have tested different machines. Everything else is working fine but not this machine.

Any tips?

A:Speed Issue

Is that the speed that you are seeing when you download a file or is it through a speed test?

Also, if that is the speed while downloading a file but your speed test is fine; Does the download start high then drop down?

http://www.sevenforums.com/network-sharing/181580-speed-issue.html
Relevancy 43.43%

I am taking a class at my school, and they lent us these older Dell laptops that run at 1.3ghz, have 800mhz fsb, and contain 256mb ddr ram (loaded up bios on the computer to see). What I can't figure out is the fact that whenever I log on using the schools user name, the computer takes a good 30 seconds logging on, and starts out with 100% usage of the cpu, although only has 22 processes. I end around six or seven of them, although the computer speeds up, it is still slow. It could probably use a good defragmenting, though it wouldn't slow down that much, right? Also, the computers are very restricted. I know some bugs with Xp that can remove the administators password, but I won't touch these computers further than I have.
 

A:Speed issue

Hi cfitzarl,

I don't know if there are 1.3 GHZ CPU's with a 800MHZ FSB. I think those 800MHZ FSB CPU's are Northwood's C (A or B, donīt know ), and Prescotts.
There are 1.3GHZ P4's, with 400MHZ FSB, some P3's with 133FSB, etc.

Regarding the machine, I'd defragment it, but it would take a while. I don't think that you have time to do it.
Also, it could have viruses, and crap like that.

Anyways, 1.3 GHZ is a little slow for windows XP, so don't expect miracles, especially if they have a normal coppermine Celeron CPU.
 

http://www.techspot.com/community/topics/speed-issue.58547/
Relevancy 43.43%

Ran into a bit of a snafu wondering if some kind soul s might take pity and offer a hand I ve had this computer home built for a few years and never had any problems with it I turned on the computer yesterday and the BIOS is showing the incorrect CPU it shows Athlon XP I can t remember what it used to say I think but I m not Windows XP is showing my speed as Ghz which is Mhz less than it Speed Issue CPU used to show as it used to show xGhz I don t know exactly what my CPU is so I don t know what to look for when changing my CPU Speed Issue FSB multiplier and such I used CPU-Z hoping it would give me some clue but it is also telling me I have as an AMD Athlon XP Barton Currently my multipler is set at and my bus speed is Can anyone help me locate my missing Mhz Thanks nbsp

https://forums.techguy.org/threads/cpu-speed-issue.801691/
Relevancy 43.43%

I recently added memory to my Gateway FX 7026 quad core. After I was done with the process, during the post process an error flashed across (too quick to capture unfortunately), but it had to do with a Microsoft Handler of some sort. The net result is that my cpu cooling fan is running constantly at top speed now. I have had the system for 6 months and it has never run like this before.

Any ideas?

A:Fan Speed Issue

Hello Erekosa, welcome to Vista forums!

Seeing that you're having issues with new RAM installed and 'handler' issues; it may be that the 'new' RAM is bad! (it happens)

The best option would be to burn Memtesr86 to a CD and test each stick individually for at least one full pass.

Keep us informed!









Later Ted

http://www.vistax64.com/general-discussion/190019-fan-speed-issue.html
Relevancy 43.43%

I just got 16GB of Corsair Dominator 1866Mhz ram. The computer has automatically set the speed to 1333Mhz. I went into the BIOS [I think it was the Bios] and there was no option to change the Ram speed. ProcessorAMD A8-5500 APU with Radeon(tm) HD Graphics Video CardNVIDIA GeForce GTX 760 RAM6.0 GB Operating SystemMicrosoft Windows 10 (build 10586), 64-bit  HP Pavilion p7-1414 Desktop PC

http://h30434.www3.hp.com/t5/Desktop-Operating-Systems-and-Recovery/Ram-speed-Issue/td-p/5713029
Relevancy 43.43%

as subject say my internet connection on this computer is only getting half of the speed I should be getting. this has been tested with three different connections, two wifi and the LAN.

Download speeds are slow as well. I have a 20mbps down and 1mbps up. I can achieve about 10mpbs down and 500kbps up.

All other computers on the network are running win 7 pro x86 and have full speed.

Any idea's?

A:speed issue with Win 7 pro x64

  
Quote: Originally Posted by pctechdude


as subject say my internet connection on this computer is only getting half of the speed I should be getting. this has been tested with three different connections, two wifi and the LAN.

Download speeds are slow as well. I have a 20mbps down and 1mbps up. I can achieve about 10mpbs down and 500kbps up.

All other computers on the network are running win 7 pro x86 and have full speed.

Any idea's?



Could be a bad network driver, configuration issue, bad cable, conflict with another device on wifi, dns, etc

Can you go to start>search>type cmd>right click and run as admin>ipconfig /all

Take a screenshot and upload it to us.

Ken J

http://www.sevenforums.com/network-sharing/139915-speed-issue-win-7-pro-x64.html
Relevancy 43.43%

Hello, I have bought this laptop, in the product specification it tells me the ram speed should be ddr3 1600 MhzI have downloaded bios updates, and now the HP Support assistent tells me my ram speed is only 800 Mhz??I went inside bios but it doesn't give me options to change ram speed. 800 Mhz is slow. is there a way to change itback to 1600 or at least 1333 Mhz? Regards

A:Ram Speed Issue

@ginoversace?, welcome to the forum. Your RAM is Double Data Rate (DDR).  Therefore, if you take 800 MHz x 2 you have 1600 MHz. Please click the Thumbs up + button if I have helped you and click Accept as Solution if your problem is solved.

http://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/Ram-Speed-Issue/td-p/5778237
Relevancy 43.43%

I have a dell demension 3000 ( i know nothing special) The original specs were a 512mb ram and a 2.8ghz p4 and i have upgraded it to 2gb of ram and a ati radeon X1550 256mb graphics card. I just reformatted from xp home to xp pro and i have noticed a sever slow down in the computer before battlefield 2 maps would load within 2 to 3 mins and ran smooth now they take close to 5 and are jitterey in the game and simple task on the computer are all jittery and slow to what could be causeing this. is it xp pro or something else. I have ran virus scan and several disk defrag waht could be wrong.
 

A:Speed issue

Does that computer come with onboard graphics? And if so did you disable it in the BIOS and or uninstall it in device manager? Was the Pro installed fresh? Have you tried uninstalling then reinstalling the GPU drivers? In the BIOS you'll find a setting that says Init Display First. If you switched from onboard to a graphics card that need to be changed from PCI to AGP or PCI express depending on the systems configuration. The other thing is when the graphics become jerky like that it is often either a GPU unable to handle the applications graphics (like an old card trying to play a new game), or it's a GPU heat issue, but with the heat thing you would probably be getting artifacts (patchy areas that aren't rendering properly) as well.
 

http://www.techspot.com/community/topics/speed-issue.116287/
Relevancy 43.43%

i have the latest BIOS update wich is F36 and i still have the issue from the time i bought this laptop win 8.1 to win 10 all up todate the problem is exisit and every time i upgarding the BIOS software i didnt see the problem has fixed !! the prblem in short that i cant hear the fan loud or maximum speed when i play game when the CPU Tem reach 80c the Fan did not reach the maximum speed (with that said CPU must not reach higher than 70c ) even though my FAN did not work properly )that i heared before every time i tried to update the BIOS ican heare it extreamly load and clear  . please HP this is supper proiority and must be fixed as soon as possible i cant play any game at this moment because of lack of speed in the fan to cool dowen the cpu .

http://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/fan-speed-issue/td-p/5854677
Relevancy 43.43%

Hello I need some advice on how to Netgear N900 center Netgear USB and control proceed My issue is with USB printing from the Netgear N900 and Netgear USB control center router the Netgear N WNDR to be specific The use of Netgear s USB control center has worked with this router before the computer was reloaded but will not after the reload Let me explain a little about the situation There are two computers on the network running XP Both were able to use the USB control center to print to the HP OfficeJet v through the router and even scan One computer has been upgraded with two SSD drives installed in a raid configuration and windows reinstalled Then I reinstalled drivers and updated windows After several hours copying manually backed up files and repairing shortcuts I started reinstalling software that needed to be put back on the system One of which was the Netgear USB control center after installing the printer The software installed correctly with no errors with a required reboot When I open the program it will not see the printer The printer has to be on for the software to be able to see it This still works on the other computer with no problems I have check the firewall setting and even tried with the firewall disabled temporarily I upgraded the USB control center from version to but still plagued with the same results I know XP is outdated but some software is still needed like the USB control center that will not work in Linux Ubuntu is also installed on this computer on the same raid drives but there is no way that I have found to see the printer connected to the router My understanding is that the control center makes a virtual USB port connected trough UDP so the OS thinks and sees the printer connected via USB The two system files that installed to the system drivers folder are netgearUDSMBus sys and netgearUDSTcpBus sys I m at a loss for what to do next or where to go from here Is there any other software that can be utilized with the router and usb printer Is there a way I can manually make the connection Any help or advice would be greatly appreciated nbsp

https://forums.techguy.org/threads/netgear-n900-and-netgear-usb-control-center.1141013/
Relevancy 43%

Hey all boys and girls First post Now to my question problem I have just bought a laptop from Fujitsu Siemens Its a model Amilo M G and it runns with Pentium M Gz GB worth of RAM - Please Help! speed issue Wireless LAN Nvidia MB Please Help! - Wireless LAN speed issue Go Integrated wireless b g Windows Home Edition SP Norman Virus Control just updated Router is D-Link DI- For more spec just ask me I have a problem with my wireless speed My signal strength is max when ever I am inside my house But the speed gets as low as Mbit s My brother has a laptop and it runns just fine with the WLAN and he can play intenet games surf and everything else with out problems We live far away from anyone else so it cannot be that someone is stealling my connection There are people with a simmilar problem http forums speedguide net archive index php t- html And it happens to quite manny so there has to be some sort off solution My friend told me it might be a firewall issue Can that be it and what do I do to get rid off it Any help is greatly appreciated Thanx Hyper nbsp

Relevancy 43%

I am using a D-Link DIR-655 router on a Windows Home Server network.

When I connect the WHS to a cable upstairs (short cable) I get Gigabit connection speed, however when I put the server downstairs (10 metre cable), I only get 100 Mb LAN speed.

The only difference is the CAT-5e cable and length.

Do I need a shielded CAT-5e or a CAT-6 cable.

The WHS box needs to be downstairs.

Paul
 

https://forums.techguy.org/threads/cable-speed-issue.735587/
Relevancy 43%

hi guys,

what would cause a slow wireless connection?
the computer thats wired is fast enough...
but on the toshiba it takes 20 to 35 seconds for google to open...
what i have tried:
i have updated the browser to internet explorer 7
i installed firefox 2.0.0.9
i uninstalled and reinstalled the wireless Nic and recreated the connection...
very odd...any ideas
 

Relevancy 43%

Welcome and well met Here s my computer laptop specs Tech Support Guy System Info Utility version OS Version Microsoft Windows Home Premium Service Pack bit Processor AMD Athlon tm X Dual Core Speed issue Internet Processor L AMD Family Model Stepping Processor Count RAM Mb Graphics Card ATI Radeon HD Graphics Mb Hard Drives C Total - MB Free - MB Motherboard Acer Aspire Antivirus None I have internet service from excede by wildblue satellite with a cable modem It s supposed to be up to Mbps Average I m getting is around - Mbps according to speedtest net The site also says I m accessing the net from Stanton MI I happen to live just north of Chicago IL Share the internet with my sister who has an older desktop with Windows Internet Speed issue XP on it Last weekend I bought a new router from MicroCenter A Netgear N Wireless Dual Band Gigabit WNDR v Both my laptop and my sister s desktop are plugged in Internet Speed issue to it Hasn t helped from what I can see I use IE for my browser I ve tried Firefox and Chrome and didn t find either of them any faster than this Can anyone tell me why my speed is so bad Is it my desktop Maybe my cat e cable is old My biggest gripe right now is that watching videos STINKS online Also I enjoy playing certain Facebook games like Journeys of Jesus and Disney Ghost of Mystwood They re horribly slow to load Can anyone offer me any suggestions of what could be causing the slow-down Thank you nbsp

A:Internet Speed issue

That is not a bad speed at all. The advertized speed is the maximum, rarely achieved in real situations. The location of your internet connection is where WildBlue's servers connect you to the internet.

Not sure what to say about your video problem except that when I had a 2 mbps connection, I watched YouTube without many delays. A lower quality feed may help.
 

https://forums.techguy.org/threads/internet-speed-issue.1089717/
Relevancy 43%

Hi all.

My friend sent me a message about his laptop. He formatted it last night because it was running very slow, but the problem continues.

What sort of things should he look at to fix his issue?

Thank you in advance.
 

Relevancy 43%

I'm running a DSL connection from a router to my wireless laptop. Regularly my speeds aren't quite as advertised but I still get 2-4 Mb/s generally. Lately it seems my web browsing has been sluggish and doing a speed test, this is proven.

However, bittorrent downloads go much faster than normal browsing.

Can anyone explain to me why this might be? I thought my slow speed could be due to my latency, but that doesn't explain to me why bittorrent is so much faster!
 

Relevancy 43%

Hey chaps I have just got bt broadband and a homehub v However I am trying to use utorrent on my desktop The main router that is being used is a TP- Link TD-W N which is then plugged into a powerline adaptor This comes out of the other powerline adapter in another room and goes into the bt homehub which I am using as a hub the ethernet cable comes off this into the desktop When I use my laptop on the wireless and connect with utorrent I can Issue utorrent speed with get speeds of up to MB d l but when I use the desktop I can only get around - KB s Issue with utorrent speed I have followed stuff online and set Issue with utorrent speed port forwarding on the homehub but Issue with utorrent speed I am still getting terrible speeds Can anyone help Thanks Chalph Tech Support Guy System Info Utility version OS Version Microsoft Windows Home Premium bit Processor Intel R Core TM CPU GHz x Family Model Stepping Processor Count RAM Mb Graphics Card NVIDIA GeForce GT GTO Mb Hard Drives C Total - MB Free - MB Motherboard Intel Corporation DG WH AAD - BQWH HU Antivirus Microsoft Security Essentials Updated and Enabled nbsp

A:Issue with utorrent speed

For your convenience here is a copy of the rule:
P2P Instructions - We do not support P2P file sharing applications and any threads requesting help for such will be closed. This includes Torrents, Kazaa, LimeWire, RapidShare, Pirate Bay, and the like. If you're interested in the topic, you are free to discuss it on our site (and please visit StealingIsIllegal.com), but information on how to use them will not be provided.Click to expand...
 

https://forums.techguy.org/threads/issue-with-utorrent-speed.993971/
Relevancy 43%

Okay here s a real head-scratch-er About days ago I started noticing some serious speed issues with web browsing while using my wireless router Every once in a while I will notice little differences during what may be peak hours and whatnot Internet issue Serious speed but this is far worse I decided to do a speed and ping test and I got an F on my network that Serious Internet speed issue normally receives a low A or high B I ran a gamut of spyware tests and I am clear there Anyway the real thing that is confusing me is I attempted to connect via a hardline the cable I use to connect to my wireless router so I at least Serious Internet speed issue know it s functional but the network was unidentifiable and I could not get an internet connection but when I reconnected my wireless router and let everything restart I was able to connect wirelessly using the same modem that would not connect me through an ethernet cable I have a Belkin n wireless router and I would appreciate any help available Thanks nbsp

A:Serious Internet speed issue

Are you remembering to power cycle (unplug for 30 seconds) the modem when switching the device connected to it?

What download/upload do you get with a connection directly to the modem with Speedtest.net? With an ethernet connection to the router? With a wireless connection to the router?
 

https://forums.techguy.org/threads/serious-internet-speed-issue.1045478/
Relevancy 43%

Hey Techist Community I was wondering if you guys could help shed some light on this issue since it's been puzzling me for a couple of days now I recently bought a new wireless router which is wirelessly bridged with my Router Modem downstairs all setup fine on my laptop it shows down and up through the ethernet cable excellent stuff However on my desktop PC using the SAME ethernet cable I get down but zilch upload on speedtest net the upload doesn't even start to test it OS Windows -bit Professional Ethernet Driver Installed Killer E Gigabit Ethernet Controller Downloaded latest version from the MSI website earlier Motherboard MSI Z -G Gaming Socket HDMI D-Sub DVI -Channel Audio ATX Motherboard So ye laptop gets down and up then using same cable and not moving the router whatsoever I put it in my desktop PC and I get down and zero up I believe Upload LAN Speed Issue this is a hardware issue which Is why I posted it here but if I've posted in the wrong section then please accept my apology

http://www.techist.com/forums/f77/lan-upload-speed-issue-277107/
Relevancy 43%

Hello everyone, I am using a linksys WRT54GS wireless router and usually works fine, but lately I noticed it's been getting slow speeds and then when I restart the router it goes back to normal and very fast for about 20-30 minutes (could vary and be longer sometimes). But then after that it goes back to it's slow speed until I restart it again.

When I bypass the router it works fine with direct connection, all my firmware is upgraded, getting 100% signal strength, it's not just my computer because when I ping from the router admin panel it gets all request timed out aswell.

Thanks for any help I can get.
 

Relevancy 43%

Hello Everyone,

i am downloading google softwares with fast speed but slow on other sites slow speed.....

I mean when i download any google softwares and youtube videos ..download speed will be about 1Mbps but when i download from any sites like softpedia.com or other sites ..download speed will be about 25 kbps...please guide me ...

Thanks

Jenisbob

A:Issue on download speed

First what kind of internet service do you have, and what speed.
Test your internet using dsl reports, or speedtest. I prefer speedtest: Speedtest.net - The Global Broadband Speed Test

How are you connecting to the internet, wired or wireless. Also as a side note the slow download speeds could also be on the downstream server end. The number of simultaneous downloads, they might throttle back the server to save bandwith, etc.

http://www.techsupportforum.com/forums/f217/issue-on-download-speed-657806.html
Relevancy 43%

Ok, I'm stumped by my internet issue. Maybe you can shed some light on it.

Ping is averaging 11000ms, upload 0.01-0.07, download 0.2-0.4
Here's the setup: AT&T modem --> Linksys Router --> 2 simple switches --> computers

What I tried:
1. I plugged in a laptop directly to the modem and speed is back to normal.
2. I swapped out a cat 5 cable between the modem and router and speed was back to normal for a few minutes, then bad again.
3. I swapped out the router with a new one and speed was back to normal for a few minutes, then bad again.

So the router is fine. I don't think it's the switches if everything is working fine for a couple minutes. Also, my wireless is fast and then bad again when I tried swapping stuff out.

Any ideas?
 

Relevancy 43%

Hi guys after installing some new RAM i checked CPU-Z to see if all was ok, and it doesn't seem to be.

I bought some Crucial Ballistix 8Gb 1866MHz, however is doesn't seem to be running at 1866 more like 667MHZ.

I have a Gigabyte GA-970A-DS3 and a AMD FX-4100

Is there way i can force the speed on the RAM to 1866?

Any input is greatly appreciated.

Regards
Toby

A:Memory Speed Issue

CPU-Z reports the clock frequency of the RAM. DDR (DDR2, DDR3) transfer data twice per clock tick, so CPU-Z reports 667MHz for DDR3-1333.

Most motherboards seem to run DDR3-1333 and up at DDR3-1333 by default. To get the higher frequency, you'd either need to set the BIOS to use XMP, or manually set the RAM frequency and timings.

http://www.sevenforums.com/hardware-devices/283103-memory-speed-issue.html
Relevancy 42.57%

Ok so I have been fighting this issue for days with no luck I'll provide as much information as I can and hopefully someone may know a fix or at least some more steps I can take in fixing this issue This is a home user Sky Fiber using Sky's router at Issue Network Speed Windows just over Mbps download His LAN consists of Windows laptop Windows PC iPhones Windows Network Speed Issue Windows laptop - speedtest net shows consitant download speeds of - Mbps Iphones - speedtest net shows consitant download speeds of - Mbps Windows PC - speedtest net shows - Mbps download although at random times during the day can reach - Mbps not often The windows PC was previously Windows when this issue started From the begining on Windows - I upgraded network adapter drivers to the latest version updated bios amp chipset drivers to latest versions with no change I performed virus malware scans and found the PC to have a fair few viruses and malware I did numerous removals with no change Safe mode with networking worked fine At this point I decided it may be a very nasty Virus Trojan Rootkit of somekind that is evading the anti-virus malware programs He had Windows and was looking to upgrade his machine anyway so we though it would be a good time to format the drive and do a fresh Windows install Windows - installed the latest drivers chipset networking adapter graphics card etc and still no change Speed still around - Mbps ocassionaly hitting the expected speed of - Mbps but not very often Safe mode with networking still working fine At this point I'm thinking a driver issue Tried with a wired connection no difference tried taking the wireless adapter out of the machine unistalling the drivers and then testing wired connection same issue Tried disabling IPv same issue Tried turning off the option - allow the computer to turn off this device same issue Tried changing the local computer policy that resevers bandwidth - forgot the actual name - however no change Tried with Windows firewall off and A V off no change All the while it is working in safe mode with networking Motherboard - Gigabyte GA-F A XM-HD Wireless Adapter - Edimax EW- Pin V Has a Realtek chip Wireless Adapter Driver - Realtek RTL CE Wireless Lan n PCI-E NIC Driver Date Driver Version So any help with trying to resolve the issue would be much appreciated a question in my mind is that if the safe mode drivers work fine could I use these drivers in normal mode Assuming the drivers are at fault Kind regards Tom

A:Windows Network Speed Issue

Hi to BC,
 
If you do a clean boot does it work as expected?

http://www.bleepingcomputer.com/forums/t/539668/windows-network-speed-issue/
Relevancy 42.57%

I purchased 10? Windows Dell issue? XPS 13..speed/RAM and received my Dell XPS 13..speed/RAM issue? Windows 10? new DELL XPS I intel laptop two days ago I opted for gb RAM and SSD I was torn between this and the macbook pro for university I have never had apple and decided to stick with microsoft just for ease of use with onedrive and what I know I have always heard negative things about windows but have had a chromebook up until now After researching Dell's laptop I thought surely a gb RAM and SSD would mean I would not have any issues unfortunately after onyl two days of using it I am getting slow responses Some examples just clicking on cortana it seems to crash occassionaly I opened a rd tab on Microsoft edge and the screen lagged and crashed for - seconds Opened a PDF from gmail which had pages laptop froze for seconds Opening microsoft word takes way too long and loads for a while My internet is fine IMO is this the laptop Windows or a mixture of both I really thought a laptop of this quality should manage to run windows with no issues Has anyone got any ideas Thanks

http://www.pcadvisor.co.uk/forum/helproom-1/dell-xps-13speedram-issue-windows-10-4603600/
Relevancy 42.57%

I am new to this board but I am at a loss with my issue I recently upgraded to Windows from Windows Speed Download 8.1 Issue Windows and Windows 8.1 Download Speed Issue am having problems with downloads This may or may not be a JDownloader issue but Windows 8.1 Download Speed Issue maybe you can help none the less Ever since the upgrade I have not reached my previous download speeds I am using JDownloader I have a mbps fiber internet connection I am getting according to SpeedTest Before the upgrade I was getting - mbps download speeds but now I am only getting up to to kbps download speeds One thing Windows 8.1 Download Speed Issue I have noticed is that the more files I am downloading the faster the speeds simultaneous downloads reaches up to kbps total but one download will only reach to kbps I have adjusted the Connections and the Simultaneous downloads to no avail Whether it may be JDownloader or a Windows issue I would be thankful for any advice pointing me in the right direction Thanks

A:Windows 8.1 Download Speed Issue

Have you tried upgrading your network card driver ?

http://www.eightforums.com/network-sharing/36259-windows-8-1-download-speed-issue.html
Relevancy 42.57%

So originally I was using a Rosewill USB HDD Dock with my WD HD103SI 1 TB Hard Drive. Everything went great, but eventually filled that up. I bought a new WD HD103SJ 1 TB Hard Drive, formatted it as NTFS, but the speeds are horrible. Transfer rates say around 2.0 mb/s give or take .5 mb/s, so it takes around an hour to transfer a 4 GB file to the hard drive, whereas it took 4 minutes on my other one. I didn't change any settings, I just plopped a new hard drive into the same HDD dock, but the speeds I am getting on that hard drive are poor. I also noticed that the file text on the hard drive is in blue? not sure why that is...

Thanks...
 

A:Speed Issue W/ New Hard Drive

Hello welcome to TSG forum.

I have just googled the part number you have included in your post "WD HD103SJ" and it comes up with a samsung spinpoint not a Western Digital (WD) like you stated. Is this correct?
 

https://forums.techguy.org/threads/speed-issue-w-new-hard-drive.906353/
Relevancy 42.57%

An application we use to run reports runs application over Speed Network Issue one with very slowly A Speed Issue over Network with one application couple of years ago I had this Speed Issue over Network with one application same problem and figured out it had to do with my hubs which were still running I changed my hubs for HP gig switches Speed Issue over Network with one application changed my ethernet cards in the pc s to gig cards Everything worked great Reports that took minutes were now down to minutes Here is my problem I recently added an IP phone system and had to change my switches because the ones I had did not meet the specs for the phone system I added gig Extreme switches with power over the switches which was needed for the new phone system Since we did this the speed for reports has gone from minutes to minutes not as bad as it had been but still bad Testing that has been done I have run cat cable from the workstation into the HP switch which had been running fine and left the phone on the Extreme switch which is needed for the phone to work We tried running reports after hours when there was no traffic over the network When this was done there were only people in the office Still took the minutes or so Please help nbsp

Relevancy 42.57%

After having problems with IE 11 on my old eMachine with Win-10 (Home)/ Comcast server I installed Chrome. It works good but the speed test resulted in 1/3rd the speed of IE 11 or FireFox. Several typical dead end suggestions (Internet ?sperts) I assume that Chrome has some setup problems, but cannot find the cure. Any suggestions? BTW, both IE and FF run ~125 Mps, Chrome~45.

A:Chrome speed test issue

Well, guess no one here knows or cares about this.

http://www.tenforums.com/browsers-email/63138-chrome-speed-test-issue.html
Relevancy 42.57%

HI,

I have 20mbps Broadband, today however i re-installed windows, having issues with my speed........

for some reason i can not seem to get past 5mbps

I`ve checked device manager and updated the lan drivers etc

anyone any idea why my line is so slow?

as my brother and a friend in the same street seem to have better results on www.speedtest.net etc

on virgin media gamefiles website, i can download files but yet still getting much slower speeds, i called virgin media they say that my account is fine and still at 20mbps so i have no idea......

anyone any ideas? please?
 

https://forums.techguy.org/threads/virgin-media-speed-issue.672994/
Relevancy 42.57%

I am not seeing anything higher than 54.0 mbps connection speeds with my N wireless set up. Any input or help would be greatly appreciated!!!

My equipment/cable service is as follows:

Cablevision Optonline with Boost (30 downstream/5 upstream/100 mbps wired LAN)

Laptop specs:

Gateway M6817 with Vista Home Premium/IntelŪ Wireless WiFi Link 4965AGN
2 gb ram, 250 HD, Intel Centrino Duo Core 2, 1.5 ghz processor

Router:

Belkin Wireless N model #F5D8233-4

Router settings: WPA2PSK/AES
20/40mhz bandwidth
b/g/n mode (laptop does not connect on N only mode)

***I also downloaded the most recent firmware/drivers for the network card and Belkin router***
 

Relevancy 42.57%

I recently reinstalled XP on my computer after erasing my entire HD, the problem is that it seems to be a lot slower for some things. For example, when I open a folder and drag the window across the screen, it's extremely laggy, when it used to be perfectly fine and smooth. Or when I scroll down on a webpage, it's also very slow and the frame rate, I guess, is horrible.

I suspect this might be because the Windows partition is 5GB instead of 30GB on my HD.

Also, I have a USB mass storage device and windows has made it the C:\ drive, and the internal HD is now J:\ How do I correct this?
 

A:Noticeable speed change + HD issue

Also, I have a USB mass storage device and windows has made it the C:\ drive, and the internal HD is now J:\ How do I correct this?

You disconnect the external hard drive and then do a full re-install of Windows and during it you make it do the drive C:\ First backup any important data and format the drive that the Windows XP is installed on now.

Here are instructions on doing a full install of Windows XP

Microsoft KB - How to perform a clean boot in Windows XP
http://support.microsoft.com/default.aspx?scid=kb;EN-US;310353

Remember to watch for where the installation program want to put drive C:
 

https://forums.techguy.org/threads/noticeable-speed-change-hd-issue.492824/
Relevancy 42.57%

I have an issue that whenever my Desktop PC resumes from sleep the CPU fans will only spin up to issue from CPU low fan Sleep- speed Resume c rpm leading to a CPU temp of c C Whenever I do a clean boot restart or resume Resume from Sleep- CPU fan low speed issue from hibernate the CPU fans spin up to c rpm leading to a CPU temp of c C Now I know some will say even C is too high but my CPU has a max temp of C amp I don't get any issues at this temp So why when I resume from sleep are the fans not controlled properly Is this a BIOS issue- cannot see any relevant settings to change Is there some Advanced Power Management setting I need to change- I cannot find anything ACPI fan driver issues I have tried SpeedFan but I have the same issue BTW Speedfan with all fans at noisy leads to a CPU Temp of c C I'm at a loss really I would like to use sleep rather than shutdown or hibernate

http://www.sevenforums.com/general-discussion/396867-resume-sleep-cpu-fan-low-speed-issue.html
Relevancy 42.57%

Well to start off im running a windows vista -bit computer its normally never been slow but i recently had a horrible virus which i had taken care of the virus was a system check virus im not sure much about it with computer issue Having an problem and speed but i know it was removed and the laptop Having an issue with computer speed and problem is running again but recently i havent had any speed on it what so ever i usually play a game on it and it ran so great before i Having an issue with computer speed and problem had the virus the virus was removed and now its running horrible it lags alot it loads slow and much more i have ran multiple virus scans using malware bytes and have not found thing yet i would really appreciate if someone could help me get it running like it used too im willing to let someone control it with remote access to see whats going on if needed i just want it fixed i can help by answering any questions you need to know as well im not very great with computers but i can figure it out so if you see this please help i would really appreciate it alot and thank you for taking the time to read this

A:Having an issue with computer speed and problem

also a friend of mine said to try and get ahold of a computer cleaner or booster, something along those lines if that will help does anyone have any suggestions on where to find one?

http://www.bleepingcomputer.com/forums/t/439228/having-an-issue-with-computer-speed-and-problem/
Relevancy 42.57%

Hey guys Recently my internet has been extremely slow but only on my computer I built the current PC I am using and I also built Internet Speed Issue Download my previous one which my little Internet Download Speed Issue brother uses His download speed is fine average at mb s my partners laptop download speed is averaging at mb s thats with a bar signal as well yet my download speed is this http www speedtest net result png That's the thing I don't get my PC is a lot more powerful than my previous one as well I have ran Virus scans though AVG Disk Clean ups Defrags Malwarebytes scans for Malware yet that doesn't seem to help at all although I got rid of Malware issues which was good I have re-installed and updated my Ethernet drivers and that also hasn't done a thing I have had a look on Google went through a lot of forums and tried out different approaches to this without success so any help would be extremely appreciated I am connecting with a Network cable via a Netgear Wireless N Modem Router - Model DGN I have tried running safe mode and the internet speed is still the same I replaced my cable with a new CAT Cable and also tried switching ports on the router which also didn't work Last night I disabled my windows firewall and my antivirus and then ran speedtest and the speed got up to a maximum of mb s which is a big change from mb s This didnt last long though but it did stay the same after I turned everything back on I used to use AVG but deleted that and installed MSE once I scanned with that I found a Java exploit virus and a virtool win obfuscator xz virus I removed the Java exploit but failed to remove the virtool win obfuscator xz I decided I would try and get rid of its origin some game ISO's I had which are now deleted But I think this virus is still lingering and messing with my computer I dont know if it is directly causing issues with my internet but the speed of my internet feels like its slowly degrading everyday I have been through some other forums about this virus and I tried to follow the great advice of Jacee but I cant download any of the tools to do the job that she is asking I am almost at the point of re-installing Windows as this getting extremely frustrating All your help will be greatly appreciated and I look forward to your replys

A:Internet Download Speed Issue

Hi NomadAU, welcome to Seven Forums.

I recently had similar problems with my Netgear DGN2000. It would download on my wired desktop pc at a snails pace. On my laptop, speed was excellent. When I wired my laptop to my router it would load my home page only and gave No Internet connection. If I moved the ethernet cable to any other ports on the router to my desktop pc it would give No Internet connection.
Removing all connection related settings from both pc's and resetting router to factory default did nothing to improve anything. So I bought a Netgear DGN2200v3, now normal service resumed.

http://www.sevenforums.com/network-sharing/288289-internet-download-speed-issue.html
Relevancy 42.57%

Hi all

My LAN interface connects only with 100Mb/s speed with no reason though it is 1Gbit capable card (Intel 82577LC). I tried it with 3 devices (router, switch, PC directly) and a lot of cables, which are works with 1 GE speed between each other except for Toshiba laptop.

Did anybody meet this problem too? Is there any fix for it?

A:LAN 1G speed issue in Satellite R630-143

The integrated Intel 82577LC Lan card supports the 10 BASE-T / 100 BASE-TX and 1000 BASE-T network standards.

Usually you can change some LAN card options in the LAN card properties.
Go to device manager -> LAN card (Ethernet) -> click right and choose Properties.
Switch to ?Advanced? tab.

Now you should see all options which could be optimized

https://forum.toshiba.eu/showthread.php?71774-LAN-1G-speed-issue-in-Satellite-R630-143
Relevancy 42.57%

I have recently chosen a new ISP and am paying for a 1Mbps connection.The problem is that i get a very low download speed of say 16Kbps only when i download using IE. Howver when i use a download manager speeds move up to 100 Kbps and the download gets completed in 1/7th of the time.

Another thing that seems related is that even if i download 6 -7 files at one time (simultaneously) each one will download at around 16 - 18 Kbps totalling to the same overall seed that i expect to get on my 1Mbps connection

Is there something i can try from my end before i blame my ISP?

A:unique downloading speed issue

If you download the same exact file from the same location via another browser, are speeds normal?

http://www.sevenforums.com/browsers-mail/157238-unique-downloading-speed-issue.html
Relevancy 42.57%

Hi I'm currently having a problem with my win7 64 bit desktops wireless speed. It has recently decided to slow to a crawl I'm talking to the point where the speed is measured in bytes not kilobytes when accessing the net and downloading files. I know it's the computer not my network as other wifi gear still works at full speed.

The only change I have made is to switch antivirus from kaspersky to mcafee, I use a Asus wl-138g v2 wifi card( I know it's old but it's been very reliable until now). Any help would be apreciated, thanx in advance.

A:Speed issue or lack there of with wireless

Sorry you are having issues dis0wned1!

Disable, or uninstall and burn (with a match) Mcafee.... I had the same issue on a clients lappy! Removed Mcafee and issue went away!

http://www.sevenforums.com/network-sharing/77219-speed-issue-lack-there-wireless.html
Relevancy 42.14%

Hello I have gone through the speed issue sticky and tried everything mentioned except physically installing more RAM I am currently at GB of RAM and running XP SP and assuming that should be sufficient I previously had a serious issue with Malware to the point it rendered my laptop useless and this great site has helped me get back on my feet But once again I need help becuase this speed issue is almost annoying enough to go buy a new PC Here is the HiJackThis log along with ActiveScan Logfile of Trend Micro HijackThis v Scan saved at on Platform Windows XP SP WinNT MSIE Internet Explorer v Boot mode Normal Running processes C WINDOWS System smss exe C WINDOWS system winlogon exe C WINDOWS system services exe C WINDOWS system lsass exe C WINDOWS system Ati evxx exe C WINDOWS system svchost exe C WINDOWS System svchost exe C Program Files Avira AntiVir PersonalEdition Classic sched exe C WINDOWS system Ati evxx exe C WINDOWS Explorer EXE C Program Files problems issue? Possible speed - Malware Computer Synaptics SynTP SynTPEnh exe C Program Files hpq HP Wireless Assistant HP Wireless Assistant exe C PROGRA Logitech MOUSEW SYSTEM EM EXEC EXE C Program Files HP Digital Imaging bin hpqSRMon exe C Program Files ATI Technologies ATI Control Panel atiptaxx exe C Program Files SiteAdvisor SiteAdv exe C Program Files Avira AntiVir PersonalEdition Classic avgnt exe C Program Files COMODO Firewall cfp exe C Program Files Microsoft Office Office GrooveMonitor exe C Program Files QuickTime qttask exe C WINDOWS system ctfmon exe C Program Files Microsoft ActiveSync wcescomm exe C PROGRA MICROS rapimgr exe C Program Files Avira AntiVir PersonalEdition Classic avguard exe C Program Files Symantec LiveUpdate ALUSchedulerSvc exe C Program Files Bonjour mDNSResponder exe C Program Files COMODO Firewall cmdagent exe C WINDOWS Computer speed problems - Possible Malware issue? System svchost exe C Program Files Common Files LightScribe LSSrvc exe C Program Files Common Files Symantec Shared PIF B E DD - - c -B F- F FCA A PIFSvc exe C Program Files Common Files Microsoft Shared VS Debug mdm exe C Program Files SiteAdvisor SAService exe C Program Files Sprint Sprint PCS Connection Manager CMSPCSUtilSvc exe C WINDOWS system svchost exe C Program Files Canon CAL CALMAIN exe C WINDOWS system SearchIndexer exe C Program Files Hewlett-Packard Shared hpqwmiex exe C WINDOWS system wscntfy exe C PROGRA hpq Shared HPQTOA EXE C Program Files internet explorer iexplore exe C Program Files Trend Micro HijackThis HijackThis exe C WINDOWS system spoolsv exe R - HKLM Software Microsoft Internet Explorer Main Default Page URL http go microsoft com fwlink LinkId R - HKLM Software Microsoft Internet Explorer Main Default Search URL http go microsoft com fwlink LinkId R - HKLM Software Microsoft Internet Explorer Main Search Page http go microsoft com fwlink LinkId R - HKLM Software Microsoft Internet Explorer Main Start Page http go microsoft com fwlink LinkId R - HKCU Software Microsoft Internet Connection Wizard ShellNext http ie redirect hp com svs rdr TY lion amp pf laptop R - HKCU Software Microsoft Windows CurrentVersion Internet Settings ProxyOverride microweb plms local O - BHO Adobe PDF Reader Link Helper - E F-C D - D -B D- B D BE B - C Program Files Common Files Adobe Acrobat ActiveX AcroIEHelper dll O - BHO ContributeBHO Class - C DC - - A A- D-C C - I Program Files Adobe Adobe Contribute CS contributeieplugin dll file missing O - BHO no name - FD D- B- FC- - AE - C Program Files SiteAdvisor SiteAdv dll O - BHO AcroIEHelperStub - DF C-E AD- -A -FA C EBDC - C Program Files Common Files Adobe Acrobat ActiveX AcroIEHelperShim dll O - BHO Spybot-S amp D IE Protection - - F - D - - D F - C PROGRA SPYBOT SDHelper dll O - BHO Groove GFS Browser Helper - - C - D -B F - BBC D A E - C PROGRA MICROS Office GRA E DLL O - BHO SSVHelper Class - BB-D F - C-B EB-D DAF D D - C Program Files Java jre bin ssv dll O - BHO Adobe PDF Conversion Toolbar Helper - AE CD -E - f- -... Read more

Relevancy 42.14%

Hi My name is Nick and I've been searching for an issue similiar to mine with a solution with no luck I'll say first that I am an IT speed Network solution - find issue Can't professional and can't figure out the cause to the problem Any help is greatly appreciated Here's the situation I'm in I had been getting Network speed issue - Can't find solution computer crashed for about the last week Couldn't fix the issue software-wise so I Network speed issue - Can't find solution reformatted hoping it was not a hardware issue and so far it seems to have worked On the same day of reformatting my wireless router failed and I bought a new one I've set up the new router set up my newly reformatted computer BUT I'm having download speed issues I am using an Edimax wireless nano-usb adapter with the drivers installed Everytime I unplug and replug the adapter in my network speed is normal testing with DSL reports at around mb down After a few minutes my speed goes extremely down and stays down to around - mbs sometimes down to kb I have identical Edimax wireless adapters desktop PCs and laptop all on Windows The other desktop with the Edimax adapter is working fine with normal speed of about mb The laptop is working fine aswell with it's built-in wifi I've put my Edimax adapter in the other desktop and it works fine I've put the other desktop's adapter in my computer and the same issue happens I've tried to put the adapter in different USB ports on my desktop and the same issue keeps happening Normal speed for a few min down to slow speed after that I'm really struggling to see what could be causing such an issue I feel like I've eliminated all possibilities I'm on a clean format with network driver installed I've done a safe boot and the same issue happens I've tried different adapters differen't usb ports The only thing I haven't tried is a wired connection because I don't have that option - I'll have to run a line from my router to a switch to my computer tomorrow to see if anything changes but I can't leave the line laying across the house Any help would be GREATLY appreciated I'm banging my head against the desk Thanks -Nick

A:Network speed issue - Can't find solution

Other technical specs whether relevant or not -

Windows 7 Home Premium clean format
Asus P6T Mobo
6 GB DDR3 1333 RAM OC @ approx 1700
i7 920 2.66GHz OC @ 4.1 GHz
Radeon HD 7850
Antec 650W PSU
Sata II HD
Edimax 150Mbps Wireless 802.11b/g/n Nano USB Adapter

http://www.techsupportforum.com/forums/f217/network-speed-issue-cant-find-solution-655175.html
Relevancy 42.14%

Hello I just recently last week built a computer I am currently using a year ish old Belkin N wireless adapter as my motherboard does not have built in wifi My download speed is significantly slower than my girlfriend s laptop and sometimes ping tests show up to - packet loss it s kind of off and on seemingly random I ve tried fixing the issue on my own to no avail I m really far away from the router but I don t think it s an issue because it consistently says I have - bars My next step is to purchase a new adapter this one seems pretty cheap It may also be an issue with an quot network icontrol quot feature on my motherboard I m gonna go through this thread and throw all the information from ipconfig and ping tests in here I would really appreciate any help at all I m not very good with networking at all thank you Edit Router serial number is a c b and the modem s n is ----------------------------------------------------------------------------------------- Windows IP Configuration Host Name Reina Primary Dns Suffix Node Type Hybrid IP Routing Enabled No WINS Proxy Enabled No DNS Suffix Search List neo rr com Wireless LAN adapter Wireless Network Connection Connection-specific DNS Suffix neo rr com Description Belkin USB Wireless Adaptor Physical Address issue loss Internet speed/packet - - B- C-F -A DHCP Enabled Yes Autoconfiguration Enabled Yes Link-local IPv Address fe c dea f Preferred IPv Address Preferred Subnet Mask Lease Internet speed/packet loss issue Obtained Monday October PM Lease Expires Tuesday October PM Default Gateway DHCP Server DHCPv IAID DHCPv Client DUID - - - - -DE- - F- - - B- C-F -A DNS Servers NetBIOS over Tcpip Enabled Tunnel adapter isatap neo rr com Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter Teredo Tunneling Pseudo-Interface Media State Media disconnected Connection-specific DNS Suffix Description Teredo Tunneling Pseudo-Interface Physical Address - - - - - - -E DHCP Enabled Internet speed/packet loss issue No Autoconfiguration Enabled Yes Tunnel adapter isatap B FCA- - B- FB- E DD D DD Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes --------------------------------------------------------------------------------- C Users Greg gt ping Pinging with bytes of data Reply from bytes time ms TTL Reply from bytes time ms TTL Reply from bytes time ms TTL Reply from bytes time ms TTL Ping statistics for Packets Sent Received Lost loss Approximate round Internet speed/packet loss issue trip times in milli-seconds Minimum ms Maximum ms Average ms C Users Greg gt ping google com Pinging google com with bytes of data Reply from bytes time ms TTL Reply from bytes time ms TTL Reply from bytes time ms TTL Reply from bytes time ms TTL Ping statistics for Packets Sent Received Lost loss Approximate round trip times in milli-seconds Minimum ms Maximum ms Average ms C Users Greg gt ping Pinging with bytes of data Reply from bytes time ms TTL Reply from bytes time ms TTL Reply from bytes time ms TTL Reply from bytes time ms TTL Ping statistics for Packets Sent Received Lost loss Approximate round trip times in milli-seconds Minimum ms Maximum ms Average ms -------------------------------------------------------------------------------- It seems to be cooperating at the moment though if I encounter issues I will post the results of all these tests again Thank you guys for any help at all nbsp

Relevancy 42.14%

My girlfriend just got one of these laptops as a gift from her step dad. It's used, it's his old one. The issue is, in the bios, it registers as 2GHz but Windows says it only has a 495MHz processor. It runs super slow.

What could be the problem?
 

Relevancy 42.14%

Hey guys So - WIN Hang Speed: SSD 8.1 Activity, R/W 100% System Issue 0 I've just been experiencing a weird issue with WIN 8.1 - 100% SSD Activity, 0 R/W Speed: System Hang Issue my system where it hangs and it is very unresponsive at random intervals of time in fact the first clue that I had an issue was when boot to WIN 8.1 - 100% SSD Activity, 0 R/W Speed: System Hang Issue desktop time was much longer than normal and desktop startup apps took forever to load My system would hang very often right when desktop begins to load in and also when opening various web links or even at random intervals And by unresponsive I mean that I can usually freely still move around my cursor and task manager is still shows moving graphs but if I click within a program the program will not respond to the command or it will be come not responding I've pulled up task manager to investigate during these periods of unresponsiveness correspond to when my C drive my SSD is at activity but read write speed Checking resource monitor and details do not show any application using the disk to cause the activity In fact at times during activity in resource monitor the processes list slowly decreases until there is nothing there and then resets itself I've also attempted to play games and have task manager on the side to see what effect this would have At several points I would encounter the same active R W speed but the game DOES NOT hang and I can game fine However if I were to click on let's say a web browser or a file explorer window while gaming and having the active R W speed it would respond to - click actions and then hang When I was typing this up I experienced active R W speed several times but sometimes I can continue typing and then randomly the browser becomes unresponsive What I've tried to fix it - Disable prefetch or something similar in chrome - Enable writing permissions to Skype - chkdsk f Results here - sfc scannow - Full System Scan with Bit defender scanned to after hours I cancelled it after that threats found - As a side note HD Sentinel shows the drive at due to lifetime use - SMART att here According the same program the max speed the drive has achieved since I've experienced this issue has been around MB s in terms of transfer rates clearly much slower than what it's capable of - CCCleaner cleaned out registry and some temp files - Benchmark programs such as crystaldisk do not properly finish as when it is running active R W speed would occur and the system hangs Specs - Crucial MX GB SSD Suspected issue - GB External Drive - GB RAM - i T This shows a period of normal activity and then unresponsiveness right when activity hits During activity what resource manager shows the processes list decreases and eventually results in the picture below Showing active R W speed yet not processes with disk activity Any help or suggestions are appreciated EDIT - I've also tried updating to the latest SSD firmware but that hasn't helped - Crucial Storage Management shows a health drive I guess it's based on SMART atts - Tried to run a short self test through HD Sentinel I let it run for minutes where I noticed that the progress bar was not progressing after the minute mark task manager showed minimum disk activity so I cancelled that

A:WIN 8.1 - 100% SSD Activity, 0 R/W Speed: System Hang Issue

Try to let it run entirely for the short test. U may choose to use SeaTools for Windows. Don't wanna rule out harddisk is faulty though.u can get the files at http://www.seagate.com/support/downloads/item/seatools-win-master/

http://www.bleepingcomputer.com/forums/t/600037/win-81-100-ssd-activity-0-rw-speed-system-hang-issue/
Relevancy 42.14%

I hate to bring this up as I am not shure if it is a site problem, or my slow internet speed.
 
Often when viewing a forum page here the page [freezes] if I take too long reading or composing a reply or post.
The navigation links quit working and I have to refresh the page to get going again. More of a nuisance really than a real problem.
Sometimes even the post/reply button does not work and when I refresh the page before posting I loose the post and have to rewrite it.

http://www.bleepingcomputer.com/forums/t/590666/site-issue-or-my-slow-internet-speed/
Relevancy 42.14%

Hello everyone,

This is an issue mainly with my hard-drive and not Windows 8. I attached an image to help resolve this problem. Whenever the 'Data transfer rate' reaches 100% I get huge performance issues. This happens whenever I deal with a few running programs that are accessing and writing data.

The speed transfer of this HD is about 3Gbits I think and is interfaced with SATA. Does this mean I have to buy a new HD with larger transfer rate or am I missing something?

I used to run Windows 7 but switched to 8 and with the new task manager I 'managed' to notice the performance with my HD.

Thanks

http://www.eightforums.com/performance-maintenance/11612-hard-drive-transfer-speed-issue.html
Relevancy 42.14%

The thumbnails on my Speed Dial are all scrambled, some appear more than once, and others don't appear at all.

I am using Opera 9.52 build 10108. I am using a skin of my own design because I found the default of Opera 9.x too hard to read. I am currently running the Java Runtime Environment v 1.6.

Does anyone know what is causing this problem?

A:[SOLVED] Opera 9.52: Speed Dial Issue

Hi,

You wouldn't be able to post a screenshot for me to talk a look at. I have to apologies, I have never used Opera so I am not very familiar with it. If you need help posting screenshots follow this link.

Cheers!

http://www.techsupportforum.com/forums/f120/solved-opera-9-52-speed-dial-issue-305985.html